2 Copyright (C) 2003-2013 Free Software Foundation, Inc.
3 Contributed by Dorit Naishlos <dorit@il.ibm.com> and
4 Ira Rosen <irar@il.ibm.com>
6 This file is part of GCC.
8 GCC is free software; you can redistribute it and/or modify it under
9 the terms of the GNU General Public License as published by the Free
10 Software Foundation; either version 3, or (at your option) any later
13 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
14 WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 You should have received a copy of the GNU General Public License
19 along with GCC; see the file COPYING3. If not see
20 <http://www.gnu.org/licenses/>. */
24 #include "coretypes.h"
29 #include "basic-block.h"
30 #include "gimple-pretty-print.h"
32 #include "gimple-iterator.h"
33 #include "gimple-ssa.h"
34 #include "tree-phinodes.h"
35 #include "ssa-iterators.h"
36 #include "tree-ssanames.h"
37 #include "tree-ssa-loop-ivopts.h"
38 #include "tree-ssa-loop-manip.h"
39 #include "tree-ssa-loop-niter.h"
40 #include "tree-pass.h"
46 #include "diagnostic-core.h"
47 #include "tree-chrec.h"
48 #include "tree-scalar-evolution.h"
49 #include "tree-vectorizer.h"
52 /* Loop Vectorization Pass.
54 This pass tries to vectorize loops.
56 For example, the vectorizer transforms the following simple loop:
58 short a[N]; short b[N]; short c[N]; int i;
64 as if it was manually vectorized by rewriting the source code into:
66 typedef int __attribute__((mode(V8HI))) v8hi;
67 short a[N]; short b[N]; short c[N]; int i;
68 v8hi *pa = (v8hi*)a, *pb = (v8hi*)b, *pc = (v8hi*)c;
71 for (i=0; i<N/8; i++){
78 The main entry to this pass is vectorize_loops(), in which
79 the vectorizer applies a set of analyses on a given set of loops,
80 followed by the actual vectorization transformation for the loops that
81 had successfully passed the analysis phase.
82 Throughout this pass we make a distinction between two types of
83 data: scalars (which are represented by SSA_NAMES), and memory references
84 ("data-refs"). These two types of data require different handling both
85 during analysis and transformation. The types of data-refs that the
86 vectorizer currently supports are ARRAY_REFS which base is an array DECL
87 (not a pointer), and INDIRECT_REFS through pointers; both array and pointer
88 accesses are required to have a simple (consecutive) access pattern.
92 The driver for the analysis phase is vect_analyze_loop().
93 It applies a set of analyses, some of which rely on the scalar evolution
94 analyzer (scev) developed by Sebastian Pop.
96 During the analysis phase the vectorizer records some information
97 per stmt in a "stmt_vec_info" struct which is attached to each stmt in the
98 loop, as well as general information about the loop as a whole, which is
99 recorded in a "loop_vec_info" struct attached to each loop.
101 Transformation phase:
102 =====================
103 The loop transformation phase scans all the stmts in the loop, and
104 creates a vector stmt (or a sequence of stmts) for each scalar stmt S in
105 the loop that needs to be vectorized. It inserts the vector code sequence
106 just before the scalar stmt S, and records a pointer to the vector code
107 in STMT_VINFO_VEC_STMT (stmt_info) (stmt_info is the stmt_vec_info struct
108 attached to S). This pointer will be used for the vectorization of following
109 stmts which use the def of stmt S. Stmt S is removed if it writes to memory;
110 otherwise, we rely on dead code elimination for removing it.
112 For example, say stmt S1 was vectorized into stmt VS1:
115 S1: b = x[i]; STMT_VINFO_VEC_STMT (stmt_info (S1)) = VS1
118 To vectorize stmt S2, the vectorizer first finds the stmt that defines
119 the operand 'b' (S1), and gets the relevant vector def 'vb' from the
120 vector stmt VS1 pointed to by STMT_VINFO_VEC_STMT (stmt_info (S1)). The
121 resulting sequence would be:
124 S1: b = x[i]; STMT_VINFO_VEC_STMT (stmt_info (S1)) = VS1
126 S2: a = b; STMT_VINFO_VEC_STMT (stmt_info (S2)) = VS2
128 Operands that are not SSA_NAMEs, are data-refs that appear in
129 load/store operations (like 'x[i]' in S1), and are handled differently.
133 Currently the only target specific information that is used is the
134 size of the vector (in bytes) - "TARGET_VECTORIZE_UNITS_PER_SIMD_WORD".
135 Targets that can support different sizes of vectors, for now will need
136 to specify one value for "TARGET_VECTORIZE_UNITS_PER_SIMD_WORD". More
137 flexibility will be added in the future.
139 Since we only vectorize operations which vector form can be
140 expressed using existing tree codes, to verify that an operation is
141 supported, the vectorizer checks the relevant optab at the relevant
142 machine_mode (e.g, optab_handler (add_optab, V8HImode)). If
143 the value found is CODE_FOR_nothing, then there's no target support, and
144 we can't vectorize the stmt.
146 For additional information on this project see:
147 http://gcc.gnu.org/projects/tree-ssa/vectorization.html
150 static void vect_estimate_min_profitable_iters (loop_vec_info
, int *, int *);
152 /* Function vect_determine_vectorization_factor
154 Determine the vectorization factor (VF). VF is the number of data elements
155 that are operated upon in parallel in a single iteration of the vectorized
156 loop. For example, when vectorizing a loop that operates on 4byte elements,
157 on a target with vector size (VS) 16byte, the VF is set to 4, since 4
158 elements can fit in a single vector register.
160 We currently support vectorization of loops in which all types operated upon
161 are of the same size. Therefore this function currently sets VF according to
162 the size of the types operated upon, and fails if there are multiple sizes
165 VF is also the factor by which the loop iterations are strip-mined, e.g.:
172 for (i=0; i<N; i+=VF){
173 a[i:VF] = b[i:VF] + c[i:VF];
178 vect_determine_vectorization_factor (loop_vec_info loop_vinfo
)
180 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
);
181 basic_block
*bbs
= LOOP_VINFO_BBS (loop_vinfo
);
182 int nbbs
= loop
->num_nodes
;
183 gimple_stmt_iterator si
;
184 unsigned int vectorization_factor
= 0;
189 stmt_vec_info stmt_info
;
192 gimple stmt
, pattern_stmt
= NULL
;
193 gimple_seq pattern_def_seq
= NULL
;
194 gimple_stmt_iterator pattern_def_si
= gsi_none ();
195 bool analyze_pattern_stmt
= false;
197 if (dump_enabled_p ())
198 dump_printf_loc (MSG_NOTE
, vect_location
,
199 "=== vect_determine_vectorization_factor ===\n");
201 for (i
= 0; i
< nbbs
; i
++)
203 basic_block bb
= bbs
[i
];
205 for (si
= gsi_start_phis (bb
); !gsi_end_p (si
); gsi_next (&si
))
208 stmt_info
= vinfo_for_stmt (phi
);
209 if (dump_enabled_p ())
211 dump_printf_loc (MSG_NOTE
, vect_location
, "==> examining phi: ");
212 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, phi
, 0);
213 dump_printf (MSG_NOTE
, "\n");
216 gcc_assert (stmt_info
);
218 if (STMT_VINFO_RELEVANT_P (stmt_info
))
220 gcc_assert (!STMT_VINFO_VECTYPE (stmt_info
));
221 scalar_type
= TREE_TYPE (PHI_RESULT (phi
));
223 if (dump_enabled_p ())
225 dump_printf_loc (MSG_NOTE
, vect_location
,
226 "get vectype for scalar type: ");
227 dump_generic_expr (MSG_NOTE
, TDF_SLIM
, scalar_type
);
228 dump_printf (MSG_NOTE
, "\n");
231 vectype
= get_vectype_for_scalar_type (scalar_type
);
234 if (dump_enabled_p ())
236 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
237 "not vectorized: unsupported "
239 dump_generic_expr (MSG_MISSED_OPTIMIZATION
, TDF_SLIM
,
241 dump_printf (MSG_MISSED_OPTIMIZATION
, "\n");
245 STMT_VINFO_VECTYPE (stmt_info
) = vectype
;
247 if (dump_enabled_p ())
249 dump_printf_loc (MSG_NOTE
, vect_location
, "vectype: ");
250 dump_generic_expr (MSG_NOTE
, TDF_SLIM
, vectype
);
251 dump_printf (MSG_NOTE
, "\n");
254 nunits
= TYPE_VECTOR_SUBPARTS (vectype
);
255 if (dump_enabled_p ())
256 dump_printf_loc (MSG_NOTE
, vect_location
, "nunits = %d\n",
259 if (!vectorization_factor
260 || (nunits
> vectorization_factor
))
261 vectorization_factor
= nunits
;
265 for (si
= gsi_start_bb (bb
); !gsi_end_p (si
) || analyze_pattern_stmt
;)
269 if (analyze_pattern_stmt
)
272 stmt
= gsi_stmt (si
);
274 stmt_info
= vinfo_for_stmt (stmt
);
276 if (dump_enabled_p ())
278 dump_printf_loc (MSG_NOTE
, vect_location
,
279 "==> examining statement: ");
280 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, stmt
, 0);
281 dump_printf (MSG_NOTE
, "\n");
284 gcc_assert (stmt_info
);
286 /* Skip stmts which do not need to be vectorized. */
287 if ((!STMT_VINFO_RELEVANT_P (stmt_info
)
288 && !STMT_VINFO_LIVE_P (stmt_info
))
289 || gimple_clobber_p (stmt
))
291 if (STMT_VINFO_IN_PATTERN_P (stmt_info
)
292 && (pattern_stmt
= STMT_VINFO_RELATED_STMT (stmt_info
))
293 && (STMT_VINFO_RELEVANT_P (vinfo_for_stmt (pattern_stmt
))
294 || STMT_VINFO_LIVE_P (vinfo_for_stmt (pattern_stmt
))))
297 stmt_info
= vinfo_for_stmt (pattern_stmt
);
298 if (dump_enabled_p ())
300 dump_printf_loc (MSG_NOTE
, vect_location
,
301 "==> examining pattern statement: ");
302 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, stmt
, 0);
303 dump_printf (MSG_NOTE
, "\n");
308 if (dump_enabled_p ())
309 dump_printf_loc (MSG_NOTE
, vect_location
, "skip.\n");
314 else if (STMT_VINFO_IN_PATTERN_P (stmt_info
)
315 && (pattern_stmt
= STMT_VINFO_RELATED_STMT (stmt_info
))
316 && (STMT_VINFO_RELEVANT_P (vinfo_for_stmt (pattern_stmt
))
317 || STMT_VINFO_LIVE_P (vinfo_for_stmt (pattern_stmt
))))
318 analyze_pattern_stmt
= true;
320 /* If a pattern statement has def stmts, analyze them too. */
321 if (is_pattern_stmt_p (stmt_info
))
323 if (pattern_def_seq
== NULL
)
325 pattern_def_seq
= STMT_VINFO_PATTERN_DEF_SEQ (stmt_info
);
326 pattern_def_si
= gsi_start (pattern_def_seq
);
328 else if (!gsi_end_p (pattern_def_si
))
329 gsi_next (&pattern_def_si
);
330 if (pattern_def_seq
!= NULL
)
332 gimple pattern_def_stmt
= NULL
;
333 stmt_vec_info pattern_def_stmt_info
= NULL
;
335 while (!gsi_end_p (pattern_def_si
))
337 pattern_def_stmt
= gsi_stmt (pattern_def_si
);
338 pattern_def_stmt_info
339 = vinfo_for_stmt (pattern_def_stmt
);
340 if (STMT_VINFO_RELEVANT_P (pattern_def_stmt_info
)
341 || STMT_VINFO_LIVE_P (pattern_def_stmt_info
))
343 gsi_next (&pattern_def_si
);
346 if (!gsi_end_p (pattern_def_si
))
348 if (dump_enabled_p ())
350 dump_printf_loc (MSG_NOTE
, vect_location
,
351 "==> examining pattern def stmt: ");
352 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
,
353 pattern_def_stmt
, 0);
354 dump_printf (MSG_NOTE
, "\n");
357 stmt
= pattern_def_stmt
;
358 stmt_info
= pattern_def_stmt_info
;
362 pattern_def_si
= gsi_none ();
363 analyze_pattern_stmt
= false;
367 analyze_pattern_stmt
= false;
370 if (gimple_get_lhs (stmt
) == NULL_TREE
)
372 if (dump_enabled_p ())
374 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
375 "not vectorized: irregular stmt.");
376 dump_gimple_stmt (MSG_MISSED_OPTIMIZATION
, TDF_SLIM
, stmt
,
378 dump_printf (MSG_MISSED_OPTIMIZATION
, "\n");
383 if (VECTOR_MODE_P (TYPE_MODE (gimple_expr_type (stmt
))))
385 if (dump_enabled_p ())
387 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
388 "not vectorized: vector stmt in loop:");
389 dump_gimple_stmt (MSG_MISSED_OPTIMIZATION
, TDF_SLIM
, stmt
, 0);
390 dump_printf (MSG_MISSED_OPTIMIZATION
, "\n");
395 if (STMT_VINFO_VECTYPE (stmt_info
))
397 /* The only case when a vectype had been already set is for stmts
398 that contain a dataref, or for "pattern-stmts" (stmts
399 generated by the vectorizer to represent/replace a certain
401 gcc_assert (STMT_VINFO_DATA_REF (stmt_info
)
402 || is_pattern_stmt_p (stmt_info
)
403 || !gsi_end_p (pattern_def_si
));
404 vectype
= STMT_VINFO_VECTYPE (stmt_info
);
408 gcc_assert (!STMT_VINFO_DATA_REF (stmt_info
));
409 scalar_type
= TREE_TYPE (gimple_get_lhs (stmt
));
410 if (dump_enabled_p ())
412 dump_printf_loc (MSG_NOTE
, vect_location
,
413 "get vectype for scalar type: ");
414 dump_generic_expr (MSG_NOTE
, TDF_SLIM
, scalar_type
);
415 dump_printf (MSG_NOTE
, "\n");
417 vectype
= get_vectype_for_scalar_type (scalar_type
);
420 if (dump_enabled_p ())
422 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
423 "not vectorized: unsupported "
425 dump_generic_expr (MSG_MISSED_OPTIMIZATION
, TDF_SLIM
,
427 dump_printf (MSG_MISSED_OPTIMIZATION
, "\n");
432 STMT_VINFO_VECTYPE (stmt_info
) = vectype
;
434 if (dump_enabled_p ())
436 dump_printf_loc (MSG_NOTE
, vect_location
, "vectype: ");
437 dump_generic_expr (MSG_NOTE
, TDF_SLIM
, vectype
);
438 dump_printf (MSG_NOTE
, "\n");
442 /* The vectorization factor is according to the smallest
443 scalar type (or the largest vector size, but we only
444 support one vector size per loop). */
445 scalar_type
= vect_get_smallest_scalar_type (stmt
, &dummy
,
447 if (dump_enabled_p ())
449 dump_printf_loc (MSG_NOTE
, vect_location
,
450 "get vectype for scalar type: ");
451 dump_generic_expr (MSG_NOTE
, TDF_SLIM
, scalar_type
);
452 dump_printf (MSG_NOTE
, "\n");
454 vf_vectype
= get_vectype_for_scalar_type (scalar_type
);
457 if (dump_enabled_p ())
459 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
460 "not vectorized: unsupported data-type ");
461 dump_generic_expr (MSG_MISSED_OPTIMIZATION
, TDF_SLIM
,
463 dump_printf (MSG_MISSED_OPTIMIZATION
, "\n");
468 if ((GET_MODE_SIZE (TYPE_MODE (vectype
))
469 != GET_MODE_SIZE (TYPE_MODE (vf_vectype
))))
471 if (dump_enabled_p ())
473 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
474 "not vectorized: different sized vector "
475 "types in statement, ");
476 dump_generic_expr (MSG_MISSED_OPTIMIZATION
, TDF_SLIM
,
478 dump_printf (MSG_MISSED_OPTIMIZATION
, " and ");
479 dump_generic_expr (MSG_MISSED_OPTIMIZATION
, TDF_SLIM
,
481 dump_printf (MSG_MISSED_OPTIMIZATION
, "\n");
486 if (dump_enabled_p ())
488 dump_printf_loc (MSG_NOTE
, vect_location
, "vectype: ");
489 dump_generic_expr (MSG_NOTE
, TDF_SLIM
, vf_vectype
);
490 dump_printf (MSG_NOTE
, "\n");
493 nunits
= TYPE_VECTOR_SUBPARTS (vf_vectype
);
494 if (dump_enabled_p ())
495 dump_printf_loc (MSG_NOTE
, vect_location
, "nunits = %d\n", nunits
);
496 if (!vectorization_factor
497 || (nunits
> vectorization_factor
))
498 vectorization_factor
= nunits
;
500 if (!analyze_pattern_stmt
&& gsi_end_p (pattern_def_si
))
502 pattern_def_seq
= NULL
;
508 /* TODO: Analyze cost. Decide if worth while to vectorize. */
509 if (dump_enabled_p ())
510 dump_printf_loc (MSG_NOTE
, vect_location
, "vectorization factor = %d\n",
511 vectorization_factor
);
512 if (vectorization_factor
<= 1)
514 if (dump_enabled_p ())
515 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
516 "not vectorized: unsupported data-type\n");
519 LOOP_VINFO_VECT_FACTOR (loop_vinfo
) = vectorization_factor
;
525 /* Function vect_is_simple_iv_evolution.
527 FORNOW: A simple evolution of an induction variables in the loop is
528 considered a polynomial evolution. */
531 vect_is_simple_iv_evolution (unsigned loop_nb
, tree access_fn
, tree
* init
,
536 tree evolution_part
= evolution_part_in_loop_num (access_fn
, loop_nb
);
539 /* When there is no evolution in this loop, the evolution function
541 if (evolution_part
== NULL_TREE
)
544 /* When the evolution is a polynomial of degree >= 2
545 the evolution function is not "simple". */
546 if (tree_is_chrec (evolution_part
))
549 step_expr
= evolution_part
;
550 init_expr
= unshare_expr (initial_condition_in_loop_num (access_fn
, loop_nb
));
552 if (dump_enabled_p ())
554 dump_printf_loc (MSG_NOTE
, vect_location
, "step: ");
555 dump_generic_expr (MSG_NOTE
, TDF_SLIM
, step_expr
);
556 dump_printf (MSG_NOTE
, ", init: ");
557 dump_generic_expr (MSG_NOTE
, TDF_SLIM
, init_expr
);
558 dump_printf (MSG_NOTE
, "\n");
564 if (TREE_CODE (step_expr
) != INTEGER_CST
565 && (TREE_CODE (step_expr
) != SSA_NAME
566 || ((bb
= gimple_bb (SSA_NAME_DEF_STMT (step_expr
)))
567 && flow_bb_inside_loop_p (get_loop (cfun
, loop_nb
), bb
))
568 || (!INTEGRAL_TYPE_P (TREE_TYPE (step_expr
))
569 && (!SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr
))
570 || !flag_associative_math
)))
571 && (TREE_CODE (step_expr
) != REAL_CST
572 || !flag_associative_math
))
574 if (dump_enabled_p ())
575 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
583 /* Function vect_analyze_scalar_cycles_1.
585 Examine the cross iteration def-use cycles of scalar variables
586 in LOOP. LOOP_VINFO represents the loop that is now being
587 considered for vectorization (can be LOOP, or an outer-loop
591 vect_analyze_scalar_cycles_1 (loop_vec_info loop_vinfo
, struct loop
*loop
)
593 basic_block bb
= loop
->header
;
595 stack_vec
<gimple
, 64> worklist
;
596 gimple_stmt_iterator gsi
;
599 if (dump_enabled_p ())
600 dump_printf_loc (MSG_NOTE
, vect_location
,
601 "=== vect_analyze_scalar_cycles ===\n");
603 /* First - identify all inductions. Reduction detection assumes that all the
604 inductions have been identified, therefore, this order must not be
606 for (gsi
= gsi_start_phis (bb
); !gsi_end_p (gsi
); gsi_next (&gsi
))
608 gimple phi
= gsi_stmt (gsi
);
609 tree access_fn
= NULL
;
610 tree def
= PHI_RESULT (phi
);
611 stmt_vec_info stmt_vinfo
= vinfo_for_stmt (phi
);
613 if (dump_enabled_p ())
615 dump_printf_loc (MSG_NOTE
, vect_location
, "Analyze phi: ");
616 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, phi
, 0);
617 dump_printf (MSG_NOTE
, "\n");
620 /* Skip virtual phi's. The data dependences that are associated with
621 virtual defs/uses (i.e., memory accesses) are analyzed elsewhere. */
622 if (virtual_operand_p (def
))
625 STMT_VINFO_DEF_TYPE (stmt_vinfo
) = vect_unknown_def_type
;
627 /* Analyze the evolution function. */
628 access_fn
= analyze_scalar_evolution (loop
, def
);
631 STRIP_NOPS (access_fn
);
632 if (dump_enabled_p ())
634 dump_printf_loc (MSG_NOTE
, vect_location
,
635 "Access function of PHI: ");
636 dump_generic_expr (MSG_NOTE
, TDF_SLIM
, access_fn
);
637 dump_printf (MSG_NOTE
, "\n");
639 STMT_VINFO_LOOP_PHI_EVOLUTION_PART (stmt_vinfo
)
640 = evolution_part_in_loop_num (access_fn
, loop
->num
);
644 || !vect_is_simple_iv_evolution (loop
->num
, access_fn
, &init
, &step
)
645 || (LOOP_VINFO_LOOP (loop_vinfo
) != loop
646 && TREE_CODE (step
) != INTEGER_CST
))
648 worklist
.safe_push (phi
);
652 gcc_assert (STMT_VINFO_LOOP_PHI_EVOLUTION_PART (stmt_vinfo
) != NULL_TREE
);
654 if (dump_enabled_p ())
655 dump_printf_loc (MSG_NOTE
, vect_location
, "Detected induction.\n");
656 STMT_VINFO_DEF_TYPE (stmt_vinfo
) = vect_induction_def
;
660 /* Second - identify all reductions and nested cycles. */
661 while (worklist
.length () > 0)
663 gimple phi
= worklist
.pop ();
664 tree def
= PHI_RESULT (phi
);
665 stmt_vec_info stmt_vinfo
= vinfo_for_stmt (phi
);
669 if (dump_enabled_p ())
671 dump_printf_loc (MSG_NOTE
, vect_location
, "Analyze phi: ");
672 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, phi
, 0);
673 dump_printf (MSG_NOTE
, "\n");
676 gcc_assert (!virtual_operand_p (def
)
677 && STMT_VINFO_DEF_TYPE (stmt_vinfo
) == vect_unknown_def_type
);
679 nested_cycle
= (loop
!= LOOP_VINFO_LOOP (loop_vinfo
));
680 reduc_stmt
= vect_force_simple_reduction (loop_vinfo
, phi
, !nested_cycle
,
686 if (dump_enabled_p ())
687 dump_printf_loc (MSG_NOTE
, vect_location
,
688 "Detected double reduction.\n");
690 STMT_VINFO_DEF_TYPE (stmt_vinfo
) = vect_double_reduction_def
;
691 STMT_VINFO_DEF_TYPE (vinfo_for_stmt (reduc_stmt
)) =
692 vect_double_reduction_def
;
698 if (dump_enabled_p ())
699 dump_printf_loc (MSG_NOTE
, vect_location
,
700 "Detected vectorizable nested cycle.\n");
702 STMT_VINFO_DEF_TYPE (stmt_vinfo
) = vect_nested_cycle
;
703 STMT_VINFO_DEF_TYPE (vinfo_for_stmt (reduc_stmt
)) =
708 if (dump_enabled_p ())
709 dump_printf_loc (MSG_NOTE
, vect_location
,
710 "Detected reduction.\n");
712 STMT_VINFO_DEF_TYPE (stmt_vinfo
) = vect_reduction_def
;
713 STMT_VINFO_DEF_TYPE (vinfo_for_stmt (reduc_stmt
)) =
715 /* Store the reduction cycles for possible vectorization in
717 LOOP_VINFO_REDUCTIONS (loop_vinfo
).safe_push (reduc_stmt
);
722 if (dump_enabled_p ())
723 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
724 "Unknown def-use cycle pattern.\n");
729 /* Function vect_analyze_scalar_cycles.
731 Examine the cross iteration def-use cycles of scalar variables, by
732 analyzing the loop-header PHIs of scalar variables. Classify each
733 cycle as one of the following: invariant, induction, reduction, unknown.
734 We do that for the loop represented by LOOP_VINFO, and also to its
735 inner-loop, if exists.
736 Examples for scalar cycles:
751 vect_analyze_scalar_cycles (loop_vec_info loop_vinfo
)
753 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
);
755 vect_analyze_scalar_cycles_1 (loop_vinfo
, loop
);
757 /* When vectorizing an outer-loop, the inner-loop is executed sequentially.
758 Reductions in such inner-loop therefore have different properties than
759 the reductions in the nest that gets vectorized:
760 1. When vectorized, they are executed in the same order as in the original
761 scalar loop, so we can't change the order of computation when
763 2. FIXME: Inner-loop reductions can be used in the inner-loop, so the
764 current checks are too strict. */
767 vect_analyze_scalar_cycles_1 (loop_vinfo
, loop
->inner
);
770 /* Function vect_get_loop_niters.
772 Determine how many iterations the loop is executed.
773 If an expression that represents the number of iterations
774 can be constructed, place it in NUMBER_OF_ITERATIONS.
775 Return the loop exit condition. */
778 vect_get_loop_niters (struct loop
*loop
, tree
*number_of_iterations
)
782 if (dump_enabled_p ())
783 dump_printf_loc (MSG_NOTE
, vect_location
,
784 "=== get_loop_niters ===\n");
785 niters
= number_of_exit_cond_executions (loop
);
787 if (niters
!= NULL_TREE
788 && niters
!= chrec_dont_know
)
790 *number_of_iterations
= niters
;
792 if (dump_enabled_p ())
794 dump_printf_loc (MSG_NOTE
, vect_location
, "==> get_loop_niters:");
795 dump_generic_expr (MSG_NOTE
, TDF_SLIM
, *number_of_iterations
);
796 dump_printf (MSG_NOTE
, "\n");
800 return get_loop_exit_condition (loop
);
804 /* Function bb_in_loop_p
806 Used as predicate for dfs order traversal of the loop bbs. */
809 bb_in_loop_p (const_basic_block bb
, const void *data
)
811 const struct loop
*const loop
= (const struct loop
*)data
;
812 if (flow_bb_inside_loop_p (loop
, bb
))
818 /* Function new_loop_vec_info.
820 Create and initialize a new loop_vec_info struct for LOOP, as well as
821 stmt_vec_info structs for all the stmts in LOOP. */
824 new_loop_vec_info (struct loop
*loop
)
828 gimple_stmt_iterator si
;
829 unsigned int i
, nbbs
;
831 res
= (loop_vec_info
) xcalloc (1, sizeof (struct _loop_vec_info
));
832 LOOP_VINFO_LOOP (res
) = loop
;
834 bbs
= get_loop_body (loop
);
836 /* Create/Update stmt_info for all stmts in the loop. */
837 for (i
= 0; i
< loop
->num_nodes
; i
++)
839 basic_block bb
= bbs
[i
];
841 /* BBs in a nested inner-loop will have been already processed (because
842 we will have called vect_analyze_loop_form for any nested inner-loop).
843 Therefore, for stmts in an inner-loop we just want to update the
844 STMT_VINFO_LOOP_VINFO field of their stmt_info to point to the new
845 loop_info of the outer-loop we are currently considering to vectorize
846 (instead of the loop_info of the inner-loop).
847 For stmts in other BBs we need to create a stmt_info from scratch. */
848 if (bb
->loop_father
!= loop
)
851 gcc_assert (loop
->inner
&& bb
->loop_father
== loop
->inner
);
852 for (si
= gsi_start_phis (bb
); !gsi_end_p (si
); gsi_next (&si
))
854 gimple phi
= gsi_stmt (si
);
855 stmt_vec_info stmt_info
= vinfo_for_stmt (phi
);
856 loop_vec_info inner_loop_vinfo
=
857 STMT_VINFO_LOOP_VINFO (stmt_info
);
858 gcc_assert (loop
->inner
== LOOP_VINFO_LOOP (inner_loop_vinfo
));
859 STMT_VINFO_LOOP_VINFO (stmt_info
) = res
;
861 for (si
= gsi_start_bb (bb
); !gsi_end_p (si
); gsi_next (&si
))
863 gimple stmt
= gsi_stmt (si
);
864 stmt_vec_info stmt_info
= vinfo_for_stmt (stmt
);
865 loop_vec_info inner_loop_vinfo
=
866 STMT_VINFO_LOOP_VINFO (stmt_info
);
867 gcc_assert (loop
->inner
== LOOP_VINFO_LOOP (inner_loop_vinfo
));
868 STMT_VINFO_LOOP_VINFO (stmt_info
) = res
;
873 /* bb in current nest. */
874 for (si
= gsi_start_phis (bb
); !gsi_end_p (si
); gsi_next (&si
))
876 gimple phi
= gsi_stmt (si
);
877 gimple_set_uid (phi
, 0);
878 set_vinfo_for_stmt (phi
, new_stmt_vec_info (phi
, res
, NULL
));
881 for (si
= gsi_start_bb (bb
); !gsi_end_p (si
); gsi_next (&si
))
883 gimple stmt
= gsi_stmt (si
);
884 gimple_set_uid (stmt
, 0);
885 set_vinfo_for_stmt (stmt
, new_stmt_vec_info (stmt
, res
, NULL
));
890 /* CHECKME: We want to visit all BBs before their successors (except for
891 latch blocks, for which this assertion wouldn't hold). In the simple
892 case of the loop forms we allow, a dfs order of the BBs would the same
893 as reversed postorder traversal, so we are safe. */
896 bbs
= XCNEWVEC (basic_block
, loop
->num_nodes
);
897 nbbs
= dfs_enumerate_from (loop
->header
, 0, bb_in_loop_p
,
898 bbs
, loop
->num_nodes
, loop
);
899 gcc_assert (nbbs
== loop
->num_nodes
);
901 LOOP_VINFO_BBS (res
) = bbs
;
902 LOOP_VINFO_NITERS (res
) = NULL
;
903 LOOP_VINFO_NITERS_UNCHANGED (res
) = NULL
;
904 LOOP_VINFO_COST_MODEL_MIN_ITERS (res
) = 0;
905 LOOP_VINFO_VECTORIZABLE_P (res
) = 0;
906 LOOP_PEELING_FOR_ALIGNMENT (res
) = 0;
907 LOOP_VINFO_VECT_FACTOR (res
) = 0;
908 LOOP_VINFO_LOOP_NEST (res
).create (3);
909 LOOP_VINFO_DATAREFS (res
).create (10);
910 LOOP_VINFO_DDRS (res
).create (10 * 10);
911 LOOP_VINFO_UNALIGNED_DR (res
) = NULL
;
912 LOOP_VINFO_MAY_MISALIGN_STMTS (res
).create (
913 PARAM_VALUE (PARAM_VECT_MAX_VERSION_FOR_ALIGNMENT_CHECKS
));
914 LOOP_VINFO_MAY_ALIAS_DDRS (res
).create (
915 PARAM_VALUE (PARAM_VECT_MAX_VERSION_FOR_ALIAS_CHECKS
));
916 LOOP_VINFO_GROUPED_STORES (res
).create (10);
917 LOOP_VINFO_REDUCTIONS (res
).create (10);
918 LOOP_VINFO_REDUCTION_CHAINS (res
).create (10);
919 LOOP_VINFO_SLP_INSTANCES (res
).create (10);
920 LOOP_VINFO_SLP_UNROLLING_FACTOR (res
) = 1;
921 LOOP_VINFO_TARGET_COST_DATA (res
) = init_cost (loop
);
922 LOOP_VINFO_PEELING_FOR_GAPS (res
) = false;
923 LOOP_VINFO_OPERANDS_SWAPPED (res
) = false;
929 /* Function destroy_loop_vec_info.
931 Free LOOP_VINFO struct, as well as all the stmt_vec_info structs of all the
932 stmts in the loop. */
935 destroy_loop_vec_info (loop_vec_info loop_vinfo
, bool clean_stmts
)
940 gimple_stmt_iterator si
;
942 vec
<slp_instance
> slp_instances
;
943 slp_instance instance
;
949 loop
= LOOP_VINFO_LOOP (loop_vinfo
);
951 bbs
= LOOP_VINFO_BBS (loop_vinfo
);
952 nbbs
= clean_stmts
? loop
->num_nodes
: 0;
953 swapped
= LOOP_VINFO_OPERANDS_SWAPPED (loop_vinfo
);
955 for (j
= 0; j
< nbbs
; j
++)
957 basic_block bb
= bbs
[j
];
958 for (si
= gsi_start_phis (bb
); !gsi_end_p (si
); gsi_next (&si
))
959 free_stmt_vec_info (gsi_stmt (si
));
961 for (si
= gsi_start_bb (bb
); !gsi_end_p (si
); )
963 gimple stmt
= gsi_stmt (si
);
965 /* We may have broken canonical form by moving a constant
966 into RHS1 of a commutative op. Fix such occurrences. */
967 if (swapped
&& is_gimple_assign (stmt
))
969 enum tree_code code
= gimple_assign_rhs_code (stmt
);
971 if ((code
== PLUS_EXPR
972 || code
== POINTER_PLUS_EXPR
973 || code
== MULT_EXPR
)
974 && CONSTANT_CLASS_P (gimple_assign_rhs1 (stmt
)))
975 swap_ssa_operands (stmt
,
976 gimple_assign_rhs1_ptr (stmt
),
977 gimple_assign_rhs2_ptr (stmt
));
980 /* Free stmt_vec_info. */
981 free_stmt_vec_info (stmt
);
986 free (LOOP_VINFO_BBS (loop_vinfo
));
987 vect_destroy_datarefs (loop_vinfo
, NULL
);
988 free_dependence_relations (LOOP_VINFO_DDRS (loop_vinfo
));
989 LOOP_VINFO_LOOP_NEST (loop_vinfo
).release ();
990 LOOP_VINFO_MAY_MISALIGN_STMTS (loop_vinfo
).release ();
991 LOOP_VINFO_MAY_ALIAS_DDRS (loop_vinfo
).release ();
992 slp_instances
= LOOP_VINFO_SLP_INSTANCES (loop_vinfo
);
993 FOR_EACH_VEC_ELT (slp_instances
, j
, instance
)
994 vect_free_slp_instance (instance
);
996 LOOP_VINFO_SLP_INSTANCES (loop_vinfo
).release ();
997 LOOP_VINFO_GROUPED_STORES (loop_vinfo
).release ();
998 LOOP_VINFO_REDUCTIONS (loop_vinfo
).release ();
999 LOOP_VINFO_REDUCTION_CHAINS (loop_vinfo
).release ();
1001 if (LOOP_VINFO_PEELING_HTAB (loop_vinfo
).is_created ())
1002 LOOP_VINFO_PEELING_HTAB (loop_vinfo
).dispose ();
1004 destroy_cost_data (LOOP_VINFO_TARGET_COST_DATA (loop_vinfo
));
1011 /* Function vect_analyze_loop_1.
1013 Apply a set of analyses on LOOP, and create a loop_vec_info struct
1014 for it. The different analyses will record information in the
1015 loop_vec_info struct. This is a subset of the analyses applied in
1016 vect_analyze_loop, to be applied on an inner-loop nested in the loop
1017 that is now considered for (outer-loop) vectorization. */
1019 static loop_vec_info
1020 vect_analyze_loop_1 (struct loop
*loop
)
1022 loop_vec_info loop_vinfo
;
1024 if (dump_enabled_p ())
1025 dump_printf_loc (MSG_NOTE
, vect_location
,
1026 "===== analyze_loop_nest_1 =====\n");
1028 /* Check the CFG characteristics of the loop (nesting, entry/exit, etc. */
1030 loop_vinfo
= vect_analyze_loop_form (loop
);
1033 if (dump_enabled_p ())
1034 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1035 "bad inner-loop form.\n");
1043 /* Function vect_analyze_loop_form.
1045 Verify that certain CFG restrictions hold, including:
1046 - the loop has a pre-header
1047 - the loop has a single entry and exit
1048 - the loop exit condition is simple enough, and the number of iterations
1049 can be analyzed (a countable loop). */
1052 vect_analyze_loop_form (struct loop
*loop
)
1054 loop_vec_info loop_vinfo
;
1056 tree number_of_iterations
= NULL
;
1057 loop_vec_info inner_loop_vinfo
= NULL
;
1059 if (dump_enabled_p ())
1060 dump_printf_loc (MSG_NOTE
, vect_location
,
1061 "=== vect_analyze_loop_form ===\n");
1063 /* Different restrictions apply when we are considering an inner-most loop,
1064 vs. an outer (nested) loop.
1065 (FORNOW. May want to relax some of these restrictions in the future). */
1069 /* Inner-most loop. We currently require that the number of BBs is
1070 exactly 2 (the header and latch). Vectorizable inner-most loops
1081 if (loop
->num_nodes
!= 2)
1083 if (dump_enabled_p ())
1084 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1085 "not vectorized: control flow in loop.\n");
1089 if (empty_block_p (loop
->header
))
1091 if (dump_enabled_p ())
1092 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1093 "not vectorized: empty loop.\n");
1099 struct loop
*innerloop
= loop
->inner
;
1102 /* Nested loop. We currently require that the loop is doubly-nested,
1103 contains a single inner loop, and the number of BBs is exactly 5.
1104 Vectorizable outer-loops look like this:
1116 The inner-loop has the properties expected of inner-most loops
1117 as described above. */
1119 if ((loop
->inner
)->inner
|| (loop
->inner
)->next
)
1121 if (dump_enabled_p ())
1122 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1123 "not vectorized: multiple nested loops.\n");
1127 /* Analyze the inner-loop. */
1128 inner_loop_vinfo
= vect_analyze_loop_1 (loop
->inner
);
1129 if (!inner_loop_vinfo
)
1131 if (dump_enabled_p ())
1132 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1133 "not vectorized: Bad inner loop.\n");
1137 if (!expr_invariant_in_loop_p (loop
,
1138 LOOP_VINFO_NITERS (inner_loop_vinfo
)))
1140 if (dump_enabled_p ())
1141 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1142 "not vectorized: inner-loop count not"
1144 destroy_loop_vec_info (inner_loop_vinfo
, true);
1148 if (loop
->num_nodes
!= 5)
1150 if (dump_enabled_p ())
1151 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1152 "not vectorized: control flow in loop.\n");
1153 destroy_loop_vec_info (inner_loop_vinfo
, true);
1157 gcc_assert (EDGE_COUNT (innerloop
->header
->preds
) == 2);
1158 entryedge
= EDGE_PRED (innerloop
->header
, 0);
1159 if (EDGE_PRED (innerloop
->header
, 0)->src
== innerloop
->latch
)
1160 entryedge
= EDGE_PRED (innerloop
->header
, 1);
1162 if (entryedge
->src
!= loop
->header
1163 || !single_exit (innerloop
)
1164 || single_exit (innerloop
)->dest
!= EDGE_PRED (loop
->latch
, 0)->src
)
1166 if (dump_enabled_p ())
1167 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1168 "not vectorized: unsupported outerloop form.\n");
1169 destroy_loop_vec_info (inner_loop_vinfo
, true);
1173 if (dump_enabled_p ())
1174 dump_printf_loc (MSG_NOTE
, vect_location
,
1175 "Considering outer-loop vectorization.\n");
1178 if (!single_exit (loop
)
1179 || EDGE_COUNT (loop
->header
->preds
) != 2)
1181 if (dump_enabled_p ())
1183 if (!single_exit (loop
))
1184 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1185 "not vectorized: multiple exits.\n");
1186 else if (EDGE_COUNT (loop
->header
->preds
) != 2)
1187 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1188 "not vectorized: too many incoming edges.\n");
1190 if (inner_loop_vinfo
)
1191 destroy_loop_vec_info (inner_loop_vinfo
, true);
1195 /* We assume that the loop exit condition is at the end of the loop. i.e,
1196 that the loop is represented as a do-while (with a proper if-guard
1197 before the loop if needed), where the loop header contains all the
1198 executable statements, and the latch is empty. */
1199 if (!empty_block_p (loop
->latch
)
1200 || !gimple_seq_empty_p (phi_nodes (loop
->latch
)))
1202 if (dump_enabled_p ())
1203 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1204 "not vectorized: latch block not empty.\n");
1205 if (inner_loop_vinfo
)
1206 destroy_loop_vec_info (inner_loop_vinfo
, true);
1210 /* Make sure there exists a single-predecessor exit bb: */
1211 if (!single_pred_p (single_exit (loop
)->dest
))
1213 edge e
= single_exit (loop
);
1214 if (!(e
->flags
& EDGE_ABNORMAL
))
1216 split_loop_exit_edge (e
);
1217 if (dump_enabled_p ())
1218 dump_printf (MSG_NOTE
, "split exit edge.\n");
1222 if (dump_enabled_p ())
1223 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1224 "not vectorized: abnormal loop exit edge.\n");
1225 if (inner_loop_vinfo
)
1226 destroy_loop_vec_info (inner_loop_vinfo
, true);
1231 loop_cond
= vect_get_loop_niters (loop
, &number_of_iterations
);
1234 if (dump_enabled_p ())
1235 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1236 "not vectorized: complicated exit condition.\n");
1237 if (inner_loop_vinfo
)
1238 destroy_loop_vec_info (inner_loop_vinfo
, true);
1242 if (!number_of_iterations
)
1244 if (dump_enabled_p ())
1245 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1246 "not vectorized: number of iterations cannot be "
1248 if (inner_loop_vinfo
)
1249 destroy_loop_vec_info (inner_loop_vinfo
, true);
1253 if (chrec_contains_undetermined (number_of_iterations
))
1255 if (dump_enabled_p ())
1256 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1257 "Infinite number of iterations.\n");
1258 if (inner_loop_vinfo
)
1259 destroy_loop_vec_info (inner_loop_vinfo
, true);
1263 if (!NITERS_KNOWN_P (number_of_iterations
))
1265 if (dump_enabled_p ())
1267 dump_printf_loc (MSG_NOTE
, vect_location
,
1268 "Symbolic number of iterations is ");
1269 dump_generic_expr (MSG_NOTE
, TDF_DETAILS
, number_of_iterations
);
1270 dump_printf (MSG_NOTE
, "\n");
1273 else if (TREE_INT_CST_LOW (number_of_iterations
) == 0)
1275 if (dump_enabled_p ())
1276 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1277 "not vectorized: number of iterations = 0.\n");
1278 if (inner_loop_vinfo
)
1279 destroy_loop_vec_info (inner_loop_vinfo
, true);
1283 loop_vinfo
= new_loop_vec_info (loop
);
1284 LOOP_VINFO_NITERS (loop_vinfo
) = number_of_iterations
;
1285 LOOP_VINFO_NITERS_UNCHANGED (loop_vinfo
) = number_of_iterations
;
1287 STMT_VINFO_TYPE (vinfo_for_stmt (loop_cond
)) = loop_exit_ctrl_vec_info_type
;
1289 /* CHECKME: May want to keep it around it in the future. */
1290 if (inner_loop_vinfo
)
1291 destroy_loop_vec_info (inner_loop_vinfo
, false);
1293 gcc_assert (!loop
->aux
);
1294 loop
->aux
= loop_vinfo
;
1299 /* Function vect_analyze_loop_operations.
1301 Scan the loop stmts and make sure they are all vectorizable. */
1304 vect_analyze_loop_operations (loop_vec_info loop_vinfo
, bool slp
)
1306 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
);
1307 basic_block
*bbs
= LOOP_VINFO_BBS (loop_vinfo
);
1308 int nbbs
= loop
->num_nodes
;
1309 gimple_stmt_iterator si
;
1310 unsigned int vectorization_factor
= 0;
1313 stmt_vec_info stmt_info
;
1314 bool need_to_vectorize
= false;
1315 int min_profitable_iters
;
1316 int min_scalar_loop_bound
;
1318 bool only_slp_in_loop
= true, ok
;
1319 HOST_WIDE_INT max_niter
;
1320 HOST_WIDE_INT estimated_niter
;
1321 int min_profitable_estimate
;
1323 if (dump_enabled_p ())
1324 dump_printf_loc (MSG_NOTE
, vect_location
,
1325 "=== vect_analyze_loop_operations ===\n");
1327 gcc_assert (LOOP_VINFO_VECT_FACTOR (loop_vinfo
));
1328 vectorization_factor
= LOOP_VINFO_VECT_FACTOR (loop_vinfo
);
1331 /* If all the stmts in the loop can be SLPed, we perform only SLP, and
1332 vectorization factor of the loop is the unrolling factor required by
1333 the SLP instances. If that unrolling factor is 1, we say, that we
1334 perform pure SLP on loop - cross iteration parallelism is not
1336 for (i
= 0; i
< nbbs
; i
++)
1338 basic_block bb
= bbs
[i
];
1339 for (si
= gsi_start_bb (bb
); !gsi_end_p (si
); gsi_next (&si
))
1341 gimple stmt
= gsi_stmt (si
);
1342 stmt_vec_info stmt_info
= vinfo_for_stmt (stmt
);
1343 gcc_assert (stmt_info
);
1344 if ((STMT_VINFO_RELEVANT_P (stmt_info
)
1345 || VECTORIZABLE_CYCLE_DEF (STMT_VINFO_DEF_TYPE (stmt_info
)))
1346 && !PURE_SLP_STMT (stmt_info
))
1347 /* STMT needs both SLP and loop-based vectorization. */
1348 only_slp_in_loop
= false;
1352 if (only_slp_in_loop
)
1353 vectorization_factor
= LOOP_VINFO_SLP_UNROLLING_FACTOR (loop_vinfo
);
1355 vectorization_factor
= least_common_multiple (vectorization_factor
,
1356 LOOP_VINFO_SLP_UNROLLING_FACTOR (loop_vinfo
));
1358 LOOP_VINFO_VECT_FACTOR (loop_vinfo
) = vectorization_factor
;
1359 if (dump_enabled_p ())
1360 dump_printf_loc (MSG_NOTE
, vect_location
,
1361 "Updating vectorization factor to %d\n",
1362 vectorization_factor
);
1365 for (i
= 0; i
< nbbs
; i
++)
1367 basic_block bb
= bbs
[i
];
1369 for (si
= gsi_start_phis (bb
); !gsi_end_p (si
); gsi_next (&si
))
1371 phi
= gsi_stmt (si
);
1374 stmt_info
= vinfo_for_stmt (phi
);
1375 if (dump_enabled_p ())
1377 dump_printf_loc (MSG_NOTE
, vect_location
, "examining phi: ");
1378 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, phi
, 0);
1379 dump_printf (MSG_NOTE
, "\n");
1382 /* Inner-loop loop-closed exit phi in outer-loop vectorization
1383 (i.e., a phi in the tail of the outer-loop). */
1384 if (! is_loop_header_bb_p (bb
))
1386 /* FORNOW: we currently don't support the case that these phis
1387 are not used in the outerloop (unless it is double reduction,
1388 i.e., this phi is vect_reduction_def), cause this case
1389 requires to actually do something here. */
1390 if ((!STMT_VINFO_RELEVANT_P (stmt_info
)
1391 || STMT_VINFO_LIVE_P (stmt_info
))
1392 && STMT_VINFO_DEF_TYPE (stmt_info
)
1393 != vect_double_reduction_def
)
1395 if (dump_enabled_p ())
1396 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1397 "Unsupported loop-closed phi in "
1402 /* If PHI is used in the outer loop, we check that its operand
1403 is defined in the inner loop. */
1404 if (STMT_VINFO_RELEVANT_P (stmt_info
))
1409 if (gimple_phi_num_args (phi
) != 1)
1412 phi_op
= PHI_ARG_DEF (phi
, 0);
1413 if (TREE_CODE (phi_op
) != SSA_NAME
)
1416 op_def_stmt
= SSA_NAME_DEF_STMT (phi_op
);
1417 if (gimple_nop_p (op_def_stmt
)
1418 || !flow_bb_inside_loop_p (loop
, gimple_bb (op_def_stmt
))
1419 || !vinfo_for_stmt (op_def_stmt
))
1422 if (STMT_VINFO_RELEVANT (vinfo_for_stmt (op_def_stmt
))
1423 != vect_used_in_outer
1424 && STMT_VINFO_RELEVANT (vinfo_for_stmt (op_def_stmt
))
1425 != vect_used_in_outer_by_reduction
)
1432 gcc_assert (stmt_info
);
1434 if (STMT_VINFO_LIVE_P (stmt_info
))
1436 /* FORNOW: not yet supported. */
1437 if (dump_enabled_p ())
1438 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1439 "not vectorized: value used after loop.\n");
1443 if (STMT_VINFO_RELEVANT (stmt_info
) == vect_used_in_scope
1444 && STMT_VINFO_DEF_TYPE (stmt_info
) != vect_induction_def
)
1446 /* A scalar-dependence cycle that we don't support. */
1447 if (dump_enabled_p ())
1448 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1449 "not vectorized: scalar dependence cycle.\n");
1453 if (STMT_VINFO_RELEVANT_P (stmt_info
))
1455 need_to_vectorize
= true;
1456 if (STMT_VINFO_DEF_TYPE (stmt_info
) == vect_induction_def
)
1457 ok
= vectorizable_induction (phi
, NULL
, NULL
);
1462 if (dump_enabled_p ())
1464 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1465 "not vectorized: relevant phi not "
1467 dump_gimple_stmt (MSG_MISSED_OPTIMIZATION
, TDF_SLIM
, phi
, 0);
1468 dump_printf (MSG_MISSED_OPTIMIZATION
, "\n");
1474 for (si
= gsi_start_bb (bb
); !gsi_end_p (si
); gsi_next (&si
))
1476 gimple stmt
= gsi_stmt (si
);
1477 if (!gimple_clobber_p (stmt
)
1478 && !vect_analyze_stmt (stmt
, &need_to_vectorize
, NULL
))
1483 /* All operations in the loop are either irrelevant (deal with loop
1484 control, or dead), or only used outside the loop and can be moved
1485 out of the loop (e.g. invariants, inductions). The loop can be
1486 optimized away by scalar optimizations. We're better off not
1487 touching this loop. */
1488 if (!need_to_vectorize
)
1490 if (dump_enabled_p ())
1491 dump_printf_loc (MSG_NOTE
, vect_location
,
1492 "All the computation can be taken out of the loop.\n");
1493 if (dump_enabled_p ())
1494 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1495 "not vectorized: redundant loop. no profit to "
1500 if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo
) && dump_enabled_p ())
1501 dump_printf_loc (MSG_NOTE
, vect_location
,
1502 "vectorization_factor = %d, niters = "
1503 HOST_WIDE_INT_PRINT_DEC
"\n", vectorization_factor
,
1504 LOOP_VINFO_INT_NITERS (loop_vinfo
));
1506 if ((LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo
)
1507 && (LOOP_VINFO_INT_NITERS (loop_vinfo
) < vectorization_factor
))
1508 || ((max_niter
= max_stmt_executions_int (loop
)) != -1
1509 && (unsigned HOST_WIDE_INT
) max_niter
< vectorization_factor
))
1511 if (dump_enabled_p ())
1512 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1513 "not vectorized: iteration count too small.\n");
1514 if (dump_enabled_p ())
1515 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1516 "not vectorized: iteration count smaller than "
1517 "vectorization factor.\n");
1521 /* Analyze cost. Decide if worth while to vectorize. */
1523 /* Once VF is set, SLP costs should be updated since the number of created
1524 vector stmts depends on VF. */
1525 vect_update_slp_costs_according_to_vf (loop_vinfo
);
1527 vect_estimate_min_profitable_iters (loop_vinfo
, &min_profitable_iters
,
1528 &min_profitable_estimate
);
1529 LOOP_VINFO_COST_MODEL_MIN_ITERS (loop_vinfo
) = min_profitable_iters
;
1531 if (min_profitable_iters
< 0)
1533 if (dump_enabled_p ())
1534 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1535 "not vectorized: vectorization not profitable.\n");
1536 if (dump_enabled_p ())
1537 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1538 "not vectorized: vector version will never be "
1543 min_scalar_loop_bound
= ((PARAM_VALUE (PARAM_MIN_VECT_LOOP_BOUND
)
1544 * vectorization_factor
) - 1);
1547 /* Use the cost model only if it is more conservative than user specified
1550 th
= (unsigned) min_scalar_loop_bound
;
1551 if (min_profitable_iters
1552 && (!min_scalar_loop_bound
1553 || min_profitable_iters
> min_scalar_loop_bound
))
1554 th
= (unsigned) min_profitable_iters
;
1556 if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo
)
1557 && LOOP_VINFO_INT_NITERS (loop_vinfo
) <= th
)
1559 if (dump_enabled_p ())
1560 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1561 "not vectorized: vectorization not profitable.\n");
1562 if (dump_enabled_p ())
1563 dump_printf_loc (MSG_NOTE
, vect_location
,
1564 "not vectorized: iteration count smaller than user "
1565 "specified loop bound parameter or minimum profitable "
1566 "iterations (whichever is more conservative).\n");
1570 if ((estimated_niter
= estimated_stmt_executions_int (loop
)) != -1
1571 && ((unsigned HOST_WIDE_INT
) estimated_niter
1572 <= MAX (th
, (unsigned)min_profitable_estimate
)))
1574 if (dump_enabled_p ())
1575 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1576 "not vectorized: estimated iteration count too "
1578 if (dump_enabled_p ())
1579 dump_printf_loc (MSG_NOTE
, vect_location
,
1580 "not vectorized: estimated iteration count smaller "
1581 "than specified loop bound parameter or minimum "
1582 "profitable iterations (whichever is more "
1583 "conservative).\n");
1587 if (LOOP_PEELING_FOR_ALIGNMENT (loop_vinfo
)
1588 || ((int) tree_ctz (LOOP_VINFO_NITERS (loop_vinfo
))
1589 < exact_log2 (vectorization_factor
)))
1591 if (dump_enabled_p ())
1592 dump_printf_loc (MSG_NOTE
, vect_location
, "epilog loop required.\n");
1593 if (!vect_can_advance_ivs_p (loop_vinfo
))
1595 if (dump_enabled_p ())
1596 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1597 "not vectorized: can't create epilog loop 1.\n");
1600 if (!slpeel_can_duplicate_loop_p (loop
, single_exit (loop
)))
1602 if (dump_enabled_p ())
1603 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1604 "not vectorized: can't create epilog loop 2.\n");
1613 /* Function vect_analyze_loop_2.
1615 Apply a set of analyses on LOOP, and create a loop_vec_info struct
1616 for it. The different analyses will record information in the
1617 loop_vec_info struct. */
1619 vect_analyze_loop_2 (loop_vec_info loop_vinfo
)
1621 bool ok
, slp
= false;
1622 int max_vf
= MAX_VECTORIZATION_FACTOR
;
1625 /* Find all data references in the loop (which correspond to vdefs/vuses)
1626 and analyze their evolution in the loop. Also adjust the minimal
1627 vectorization factor according to the loads and stores.
1629 FORNOW: Handle only simple, array references, which
1630 alignment can be forced, and aligned pointer-references. */
1632 ok
= vect_analyze_data_refs (loop_vinfo
, NULL
, &min_vf
);
1635 if (dump_enabled_p ())
1636 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1637 "bad data references.\n");
1641 /* Analyze the access patterns of the data-refs in the loop (consecutive,
1642 complex, etc.). FORNOW: Only handle consecutive access pattern. */
1644 ok
= vect_analyze_data_ref_accesses (loop_vinfo
, NULL
);
1647 if (dump_enabled_p ())
1648 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1649 "bad data access.\n");
1653 /* Classify all cross-iteration scalar data-flow cycles.
1654 Cross-iteration cycles caused by virtual phis are analyzed separately. */
1656 vect_analyze_scalar_cycles (loop_vinfo
);
1658 vect_pattern_recog (loop_vinfo
, NULL
);
1660 /* Data-flow analysis to detect stmts that do not need to be vectorized. */
1662 ok
= vect_mark_stmts_to_be_vectorized (loop_vinfo
);
1665 if (dump_enabled_p ())
1666 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1667 "unexpected pattern.\n");
1671 /* Analyze data dependences between the data-refs in the loop
1672 and adjust the maximum vectorization factor according to
1674 FORNOW: fail at the first data dependence that we encounter. */
1676 ok
= vect_analyze_data_ref_dependences (loop_vinfo
, &max_vf
);
1680 if (dump_enabled_p ())
1681 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1682 "bad data dependence.\n");
1686 ok
= vect_determine_vectorization_factor (loop_vinfo
);
1689 if (dump_enabled_p ())
1690 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1691 "can't determine vectorization factor.\n");
1694 if (max_vf
< LOOP_VINFO_VECT_FACTOR (loop_vinfo
))
1696 if (dump_enabled_p ())
1697 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1698 "bad data dependence.\n");
1702 /* Analyze the alignment of the data-refs in the loop.
1703 Fail if a data reference is found that cannot be vectorized. */
1705 ok
= vect_analyze_data_refs_alignment (loop_vinfo
, NULL
);
1708 if (dump_enabled_p ())
1709 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1710 "bad data alignment.\n");
1714 /* Prune the list of ddrs to be tested at run-time by versioning for alias.
1715 It is important to call pruning after vect_analyze_data_ref_accesses,
1716 since we use grouping information gathered by interleaving analysis. */
1717 ok
= vect_prune_runtime_alias_test_list (loop_vinfo
);
1720 if (dump_enabled_p ())
1721 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1722 "too long list of versioning for alias "
1723 "run-time tests.\n");
1727 /* This pass will decide on using loop versioning and/or loop peeling in
1728 order to enhance the alignment of data references in the loop. */
1730 ok
= vect_enhance_data_refs_alignment (loop_vinfo
);
1733 if (dump_enabled_p ())
1734 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1735 "bad data alignment.\n");
1739 /* Check the SLP opportunities in the loop, analyze and build SLP trees. */
1740 ok
= vect_analyze_slp (loop_vinfo
, NULL
);
1743 /* Decide which possible SLP instances to SLP. */
1744 slp
= vect_make_slp_decision (loop_vinfo
);
1746 /* Find stmts that need to be both vectorized and SLPed. */
1747 vect_detect_hybrid_slp (loop_vinfo
);
1752 /* Scan all the operations in the loop and make sure they are
1755 ok
= vect_analyze_loop_operations (loop_vinfo
, slp
);
1758 if (dump_enabled_p ())
1759 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1760 "bad operation or unsupported loop bound.\n");
1767 /* Function vect_analyze_loop.
1769 Apply a set of analyses on LOOP, and create a loop_vec_info struct
1770 for it. The different analyses will record information in the
1771 loop_vec_info struct. */
1773 vect_analyze_loop (struct loop
*loop
)
1775 loop_vec_info loop_vinfo
;
1776 unsigned int vector_sizes
;
1778 /* Autodetect first vector size we try. */
1779 current_vector_size
= 0;
1780 vector_sizes
= targetm
.vectorize
.autovectorize_vector_sizes ();
1782 if (dump_enabled_p ())
1783 dump_printf_loc (MSG_NOTE
, vect_location
,
1784 "===== analyze_loop_nest =====\n");
1786 if (loop_outer (loop
)
1787 && loop_vec_info_for_loop (loop_outer (loop
))
1788 && LOOP_VINFO_VECTORIZABLE_P (loop_vec_info_for_loop (loop_outer (loop
))))
1790 if (dump_enabled_p ())
1791 dump_printf_loc (MSG_NOTE
, vect_location
,
1792 "outer-loop already vectorized.\n");
1798 /* Check the CFG characteristics of the loop (nesting, entry/exit). */
1799 loop_vinfo
= vect_analyze_loop_form (loop
);
1802 if (dump_enabled_p ())
1803 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
1804 "bad loop form.\n");
1808 if (vect_analyze_loop_2 (loop_vinfo
))
1810 LOOP_VINFO_VECTORIZABLE_P (loop_vinfo
) = 1;
1815 destroy_loop_vec_info (loop_vinfo
, true);
1817 vector_sizes
&= ~current_vector_size
;
1818 if (vector_sizes
== 0
1819 || current_vector_size
== 0)
1822 /* Try the next biggest vector size. */
1823 current_vector_size
= 1 << floor_log2 (vector_sizes
);
1824 if (dump_enabled_p ())
1825 dump_printf_loc (MSG_NOTE
, vect_location
,
1826 "***** Re-trying analysis with "
1827 "vector size %d\n", current_vector_size
);
1832 /* Function reduction_code_for_scalar_code
1835 CODE - tree_code of a reduction operations.
1838 REDUC_CODE - the corresponding tree-code to be used to reduce the
1839 vector of partial results into a single scalar result (which
1840 will also reside in a vector) or ERROR_MARK if the operation is
1841 a supported reduction operation, but does not have such tree-code.
1843 Return FALSE if CODE currently cannot be vectorized as reduction. */
1846 reduction_code_for_scalar_code (enum tree_code code
,
1847 enum tree_code
*reduc_code
)
1852 *reduc_code
= REDUC_MAX_EXPR
;
1856 *reduc_code
= REDUC_MIN_EXPR
;
1860 *reduc_code
= REDUC_PLUS_EXPR
;
1868 *reduc_code
= ERROR_MARK
;
1877 /* Error reporting helper for vect_is_simple_reduction below. GIMPLE statement
1878 STMT is printed with a message MSG. */
1881 report_vect_op (int msg_type
, gimple stmt
, const char *msg
)
1883 dump_printf_loc (msg_type
, vect_location
, "%s", msg
);
1884 dump_gimple_stmt (msg_type
, TDF_SLIM
, stmt
, 0);
1885 dump_printf (msg_type
, "\n");
1889 /* Detect SLP reduction of the form:
1899 PHI is the reduction phi node (#a1 = phi <a5, a0> above)
1900 FIRST_STMT is the first reduction stmt in the chain
1901 (a2 = operation (a1)).
1903 Return TRUE if a reduction chain was detected. */
1906 vect_is_slp_reduction (loop_vec_info loop_info
, gimple phi
, gimple first_stmt
)
1908 struct loop
*loop
= (gimple_bb (phi
))->loop_father
;
1909 struct loop
*vect_loop
= LOOP_VINFO_LOOP (loop_info
);
1910 enum tree_code code
;
1911 gimple current_stmt
= NULL
, loop_use_stmt
= NULL
, first
, next_stmt
;
1912 stmt_vec_info use_stmt_info
, current_stmt_info
;
1914 imm_use_iterator imm_iter
;
1915 use_operand_p use_p
;
1916 int nloop_uses
, size
= 0, n_out_of_loop_uses
;
1919 if (loop
!= vect_loop
)
1922 lhs
= PHI_RESULT (phi
);
1923 code
= gimple_assign_rhs_code (first_stmt
);
1927 n_out_of_loop_uses
= 0;
1928 FOR_EACH_IMM_USE_FAST (use_p
, imm_iter
, lhs
)
1930 gimple use_stmt
= USE_STMT (use_p
);
1931 if (is_gimple_debug (use_stmt
))
1934 use_stmt
= USE_STMT (use_p
);
1936 /* Check if we got back to the reduction phi. */
1937 if (use_stmt
== phi
)
1939 loop_use_stmt
= use_stmt
;
1944 if (flow_bb_inside_loop_p (loop
, gimple_bb (use_stmt
)))
1946 if (vinfo_for_stmt (use_stmt
)
1947 && !STMT_VINFO_IN_PATTERN_P (vinfo_for_stmt (use_stmt
)))
1949 loop_use_stmt
= use_stmt
;
1954 n_out_of_loop_uses
++;
1956 /* There are can be either a single use in the loop or two uses in
1958 if (nloop_uses
> 1 || (n_out_of_loop_uses
&& nloop_uses
))
1965 /* We reached a statement with no loop uses. */
1966 if (nloop_uses
== 0)
1969 /* This is a loop exit phi, and we haven't reached the reduction phi. */
1970 if (gimple_code (loop_use_stmt
) == GIMPLE_PHI
)
1973 if (!is_gimple_assign (loop_use_stmt
)
1974 || code
!= gimple_assign_rhs_code (loop_use_stmt
)
1975 || !flow_bb_inside_loop_p (loop
, gimple_bb (loop_use_stmt
)))
1978 /* Insert USE_STMT into reduction chain. */
1979 use_stmt_info
= vinfo_for_stmt (loop_use_stmt
);
1982 current_stmt_info
= vinfo_for_stmt (current_stmt
);
1983 GROUP_NEXT_ELEMENT (current_stmt_info
) = loop_use_stmt
;
1984 GROUP_FIRST_ELEMENT (use_stmt_info
)
1985 = GROUP_FIRST_ELEMENT (current_stmt_info
);
1988 GROUP_FIRST_ELEMENT (use_stmt_info
) = loop_use_stmt
;
1990 lhs
= gimple_assign_lhs (loop_use_stmt
);
1991 current_stmt
= loop_use_stmt
;
1995 if (!found
|| loop_use_stmt
!= phi
|| size
< 2)
1998 /* Swap the operands, if needed, to make the reduction operand be the second
2000 lhs
= PHI_RESULT (phi
);
2001 next_stmt
= GROUP_FIRST_ELEMENT (vinfo_for_stmt (current_stmt
));
2004 if (gimple_assign_rhs2 (next_stmt
) == lhs
)
2006 tree op
= gimple_assign_rhs1 (next_stmt
);
2007 gimple def_stmt
= NULL
;
2009 if (TREE_CODE (op
) == SSA_NAME
)
2010 def_stmt
= SSA_NAME_DEF_STMT (op
);
2012 /* Check that the other def is either defined in the loop
2013 ("vect_internal_def"), or it's an induction (defined by a
2014 loop-header phi-node). */
2016 && gimple_bb (def_stmt
)
2017 && flow_bb_inside_loop_p (loop
, gimple_bb (def_stmt
))
2018 && (is_gimple_assign (def_stmt
)
2019 || is_gimple_call (def_stmt
)
2020 || STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt
))
2021 == vect_induction_def
2022 || (gimple_code (def_stmt
) == GIMPLE_PHI
2023 && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt
))
2024 == vect_internal_def
2025 && !is_loop_header_bb_p (gimple_bb (def_stmt
)))))
2027 lhs
= gimple_assign_lhs (next_stmt
);
2028 next_stmt
= GROUP_NEXT_ELEMENT (vinfo_for_stmt (next_stmt
));
2036 tree op
= gimple_assign_rhs2 (next_stmt
);
2037 gimple def_stmt
= NULL
;
2039 if (TREE_CODE (op
) == SSA_NAME
)
2040 def_stmt
= SSA_NAME_DEF_STMT (op
);
2042 /* Check that the other def is either defined in the loop
2043 ("vect_internal_def"), or it's an induction (defined by a
2044 loop-header phi-node). */
2046 && gimple_bb (def_stmt
)
2047 && flow_bb_inside_loop_p (loop
, gimple_bb (def_stmt
))
2048 && (is_gimple_assign (def_stmt
)
2049 || is_gimple_call (def_stmt
)
2050 || STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt
))
2051 == vect_induction_def
2052 || (gimple_code (def_stmt
) == GIMPLE_PHI
2053 && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt
))
2054 == vect_internal_def
2055 && !is_loop_header_bb_p (gimple_bb (def_stmt
)))))
2057 if (dump_enabled_p ())
2059 dump_printf_loc (MSG_NOTE
, vect_location
, "swapping oprnds: ");
2060 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, next_stmt
, 0);
2061 dump_printf (MSG_NOTE
, "\n");
2064 swap_ssa_operands (next_stmt
,
2065 gimple_assign_rhs1_ptr (next_stmt
),
2066 gimple_assign_rhs2_ptr (next_stmt
));
2067 update_stmt (next_stmt
);
2069 if (CONSTANT_CLASS_P (gimple_assign_rhs1 (next_stmt
)))
2070 LOOP_VINFO_OPERANDS_SWAPPED (loop_info
) = true;
2076 lhs
= gimple_assign_lhs (next_stmt
);
2077 next_stmt
= GROUP_NEXT_ELEMENT (vinfo_for_stmt (next_stmt
));
2080 /* Save the chain for further analysis in SLP detection. */
2081 first
= GROUP_FIRST_ELEMENT (vinfo_for_stmt (current_stmt
));
2082 LOOP_VINFO_REDUCTION_CHAINS (loop_info
).safe_push (first
);
2083 GROUP_SIZE (vinfo_for_stmt (first
)) = size
;
2089 /* Function vect_is_simple_reduction_1
2091 (1) Detect a cross-iteration def-use cycle that represents a simple
2092 reduction computation. We look for the following pattern:
2097 a2 = operation (a3, a1)
2104 a2 = operation (a3, a1)
2107 1. operation is commutative and associative and it is safe to
2108 change the order of the computation (if CHECK_REDUCTION is true)
2109 2. no uses for a2 in the loop (a2 is used out of the loop)
2110 3. no uses of a1 in the loop besides the reduction operation
2111 4. no uses of a1 outside the loop.
2113 Conditions 1,4 are tested here.
2114 Conditions 2,3 are tested in vect_mark_stmts_to_be_vectorized.
2116 (2) Detect a cross-iteration def-use cycle in nested loops, i.e.,
2117 nested cycles, if CHECK_REDUCTION is false.
2119 (3) Detect cycles of phi nodes in outer-loop vectorization, i.e., double
2123 inner loop (def of a3)
2126 If MODIFY is true it tries also to rework the code in-place to enable
2127 detection of more reduction patterns. For the time being we rewrite
2128 "res -= RHS" into "rhs += -RHS" when it seems worthwhile.
2132 vect_is_simple_reduction_1 (loop_vec_info loop_info
, gimple phi
,
2133 bool check_reduction
, bool *double_reduc
,
2136 struct loop
*loop
= (gimple_bb (phi
))->loop_father
;
2137 struct loop
*vect_loop
= LOOP_VINFO_LOOP (loop_info
);
2138 edge latch_e
= loop_latch_edge (loop
);
2139 tree loop_arg
= PHI_ARG_DEF_FROM_EDGE (phi
, latch_e
);
2140 gimple def_stmt
, def1
= NULL
, def2
= NULL
;
2141 enum tree_code orig_code
, code
;
2142 tree op1
, op2
, op3
= NULL_TREE
, op4
= NULL_TREE
;
2146 imm_use_iterator imm_iter
;
2147 use_operand_p use_p
;
2150 *double_reduc
= false;
2152 /* If CHECK_REDUCTION is true, we assume inner-most loop vectorization,
2153 otherwise, we assume outer loop vectorization. */
2154 gcc_assert ((check_reduction
&& loop
== vect_loop
)
2155 || (!check_reduction
&& flow_loop_nested_p (vect_loop
, loop
)));
2157 name
= PHI_RESULT (phi
);
2159 FOR_EACH_IMM_USE_FAST (use_p
, imm_iter
, name
)
2161 gimple use_stmt
= USE_STMT (use_p
);
2162 if (is_gimple_debug (use_stmt
))
2165 if (!flow_bb_inside_loop_p (loop
, gimple_bb (use_stmt
)))
2167 if (dump_enabled_p ())
2168 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
2169 "intermediate value used outside loop.\n");
2174 if (vinfo_for_stmt (use_stmt
)
2175 && !is_pattern_stmt_p (vinfo_for_stmt (use_stmt
)))
2179 if (dump_enabled_p ())
2180 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
2181 "reduction used in loop.\n");
2186 if (TREE_CODE (loop_arg
) != SSA_NAME
)
2188 if (dump_enabled_p ())
2190 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
2191 "reduction: not ssa_name: ");
2192 dump_generic_expr (MSG_MISSED_OPTIMIZATION
, TDF_SLIM
, loop_arg
);
2193 dump_printf (MSG_MISSED_OPTIMIZATION
, "\n");
2198 def_stmt
= SSA_NAME_DEF_STMT (loop_arg
);
2201 if (dump_enabled_p ())
2202 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
2203 "reduction: no def_stmt.\n");
2207 if (!is_gimple_assign (def_stmt
) && gimple_code (def_stmt
) != GIMPLE_PHI
)
2209 if (dump_enabled_p ())
2211 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, def_stmt
, 0);
2212 dump_printf (MSG_NOTE
, "\n");
2217 if (is_gimple_assign (def_stmt
))
2219 name
= gimple_assign_lhs (def_stmt
);
2224 name
= PHI_RESULT (def_stmt
);
2229 FOR_EACH_IMM_USE_FAST (use_p
, imm_iter
, name
)
2231 gimple use_stmt
= USE_STMT (use_p
);
2232 if (is_gimple_debug (use_stmt
))
2234 if (flow_bb_inside_loop_p (loop
, gimple_bb (use_stmt
))
2235 && vinfo_for_stmt (use_stmt
)
2236 && !is_pattern_stmt_p (vinfo_for_stmt (use_stmt
)))
2240 if (dump_enabled_p ())
2241 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
2242 "reduction used in loop.\n");
2247 /* If DEF_STMT is a phi node itself, we expect it to have a single argument
2248 defined in the inner loop. */
2251 op1
= PHI_ARG_DEF (def_stmt
, 0);
2253 if (gimple_phi_num_args (def_stmt
) != 1
2254 || TREE_CODE (op1
) != SSA_NAME
)
2256 if (dump_enabled_p ())
2257 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
2258 "unsupported phi node definition.\n");
2263 def1
= SSA_NAME_DEF_STMT (op1
);
2264 if (flow_bb_inside_loop_p (loop
, gimple_bb (def_stmt
))
2266 && flow_bb_inside_loop_p (loop
->inner
, gimple_bb (def1
))
2267 && is_gimple_assign (def1
))
2269 if (dump_enabled_p ())
2270 report_vect_op (MSG_NOTE
, def_stmt
,
2271 "detected double reduction: ");
2273 *double_reduc
= true;
2280 code
= orig_code
= gimple_assign_rhs_code (def_stmt
);
2282 /* We can handle "res -= x[i]", which is non-associative by
2283 simply rewriting this into "res += -x[i]". Avoid changing
2284 gimple instruction for the first simple tests and only do this
2285 if we're allowed to change code at all. */
2286 if (code
== MINUS_EXPR
2288 && (op1
= gimple_assign_rhs1 (def_stmt
))
2289 && TREE_CODE (op1
) == SSA_NAME
2290 && SSA_NAME_DEF_STMT (op1
) == phi
)
2294 && (!commutative_tree_code (code
) || !associative_tree_code (code
)))
2296 if (dump_enabled_p ())
2297 report_vect_op (MSG_MISSED_OPTIMIZATION
, def_stmt
,
2298 "reduction: not commutative/associative: ");
2302 if (get_gimple_rhs_class (code
) != GIMPLE_BINARY_RHS
)
2304 if (code
!= COND_EXPR
)
2306 if (dump_enabled_p ())
2307 report_vect_op (MSG_MISSED_OPTIMIZATION
, def_stmt
,
2308 "reduction: not binary operation: ");
2313 op3
= gimple_assign_rhs1 (def_stmt
);
2314 if (COMPARISON_CLASS_P (op3
))
2316 op4
= TREE_OPERAND (op3
, 1);
2317 op3
= TREE_OPERAND (op3
, 0);
2320 op1
= gimple_assign_rhs2 (def_stmt
);
2321 op2
= gimple_assign_rhs3 (def_stmt
);
2323 if (TREE_CODE (op1
) != SSA_NAME
&& TREE_CODE (op2
) != SSA_NAME
)
2325 if (dump_enabled_p ())
2326 report_vect_op (MSG_MISSED_OPTIMIZATION
, def_stmt
,
2327 "reduction: uses not ssa_names: ");
2334 op1
= gimple_assign_rhs1 (def_stmt
);
2335 op2
= gimple_assign_rhs2 (def_stmt
);
2337 if (TREE_CODE (op1
) != SSA_NAME
&& TREE_CODE (op2
) != SSA_NAME
)
2339 if (dump_enabled_p ())
2340 report_vect_op (MSG_MISSED_OPTIMIZATION
, def_stmt
,
2341 "reduction: uses not ssa_names: ");
2347 type
= TREE_TYPE (gimple_assign_lhs (def_stmt
));
2348 if ((TREE_CODE (op1
) == SSA_NAME
2349 && !types_compatible_p (type
,TREE_TYPE (op1
)))
2350 || (TREE_CODE (op2
) == SSA_NAME
2351 && !types_compatible_p (type
, TREE_TYPE (op2
)))
2352 || (op3
&& TREE_CODE (op3
) == SSA_NAME
2353 && !types_compatible_p (type
, TREE_TYPE (op3
)))
2354 || (op4
&& TREE_CODE (op4
) == SSA_NAME
2355 && !types_compatible_p (type
, TREE_TYPE (op4
))))
2357 if (dump_enabled_p ())
2359 dump_printf_loc (MSG_NOTE
, vect_location
,
2360 "reduction: multiple types: operation type: ");
2361 dump_generic_expr (MSG_NOTE
, TDF_SLIM
, type
);
2362 dump_printf (MSG_NOTE
, ", operands types: ");
2363 dump_generic_expr (MSG_NOTE
, TDF_SLIM
,
2365 dump_printf (MSG_NOTE
, ",");
2366 dump_generic_expr (MSG_NOTE
, TDF_SLIM
,
2370 dump_printf (MSG_NOTE
, ",");
2371 dump_generic_expr (MSG_NOTE
, TDF_SLIM
,
2377 dump_printf (MSG_NOTE
, ",");
2378 dump_generic_expr (MSG_NOTE
, TDF_SLIM
,
2381 dump_printf (MSG_NOTE
, "\n");
2387 /* Check that it's ok to change the order of the computation.
2388 Generally, when vectorizing a reduction we change the order of the
2389 computation. This may change the behavior of the program in some
2390 cases, so we need to check that this is ok. One exception is when
2391 vectorizing an outer-loop: the inner-loop is executed sequentially,
2392 and therefore vectorizing reductions in the inner-loop during
2393 outer-loop vectorization is safe. */
2395 /* CHECKME: check for !flag_finite_math_only too? */
2396 if (SCALAR_FLOAT_TYPE_P (type
) && !flag_associative_math
2399 /* Changing the order of operations changes the semantics. */
2400 if (dump_enabled_p ())
2401 report_vect_op (MSG_MISSED_OPTIMIZATION
, def_stmt
,
2402 "reduction: unsafe fp math optimization: ");
2405 else if (INTEGRAL_TYPE_P (type
) && TYPE_OVERFLOW_TRAPS (type
)
2408 /* Changing the order of operations changes the semantics. */
2409 if (dump_enabled_p ())
2410 report_vect_op (MSG_MISSED_OPTIMIZATION
, def_stmt
,
2411 "reduction: unsafe int math optimization: ");
2414 else if (SAT_FIXED_POINT_TYPE_P (type
) && check_reduction
)
2416 /* Changing the order of operations changes the semantics. */
2417 if (dump_enabled_p ())
2418 report_vect_op (MSG_MISSED_OPTIMIZATION
, def_stmt
,
2419 "reduction: unsafe fixed-point math optimization: ");
2423 /* If we detected "res -= x[i]" earlier, rewrite it into
2424 "res += -x[i]" now. If this turns out to be useless reassoc
2425 will clean it up again. */
2426 if (orig_code
== MINUS_EXPR
)
2428 tree rhs
= gimple_assign_rhs2 (def_stmt
);
2429 tree negrhs
= make_ssa_name (TREE_TYPE (rhs
), NULL
);
2430 gimple negate_stmt
= gimple_build_assign_with_ops (NEGATE_EXPR
, negrhs
,
2432 gimple_stmt_iterator gsi
= gsi_for_stmt (def_stmt
);
2433 set_vinfo_for_stmt (negate_stmt
, new_stmt_vec_info (negate_stmt
,
2435 gsi_insert_before (&gsi
, negate_stmt
, GSI_NEW_STMT
);
2436 gimple_assign_set_rhs2 (def_stmt
, negrhs
);
2437 gimple_assign_set_rhs_code (def_stmt
, PLUS_EXPR
);
2438 update_stmt (def_stmt
);
2441 /* Reduction is safe. We're dealing with one of the following:
2442 1) integer arithmetic and no trapv
2443 2) floating point arithmetic, and special flags permit this optimization
2444 3) nested cycle (i.e., outer loop vectorization). */
2445 if (TREE_CODE (op1
) == SSA_NAME
)
2446 def1
= SSA_NAME_DEF_STMT (op1
);
2448 if (TREE_CODE (op2
) == SSA_NAME
)
2449 def2
= SSA_NAME_DEF_STMT (op2
);
2451 if (code
!= COND_EXPR
2452 && ((!def1
|| gimple_nop_p (def1
)) && (!def2
|| gimple_nop_p (def2
))))
2454 if (dump_enabled_p ())
2455 report_vect_op (MSG_NOTE
, def_stmt
, "reduction: no defs for operands: ");
2459 /* Check that one def is the reduction def, defined by PHI,
2460 the other def is either defined in the loop ("vect_internal_def"),
2461 or it's an induction (defined by a loop-header phi-node). */
2463 if (def2
&& def2
== phi
2464 && (code
== COND_EXPR
2465 || !def1
|| gimple_nop_p (def1
)
2466 || !flow_bb_inside_loop_p (loop
, gimple_bb (def1
))
2467 || (def1
&& flow_bb_inside_loop_p (loop
, gimple_bb (def1
))
2468 && (is_gimple_assign (def1
)
2469 || is_gimple_call (def1
)
2470 || STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def1
))
2471 == vect_induction_def
2472 || (gimple_code (def1
) == GIMPLE_PHI
2473 && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def1
))
2474 == vect_internal_def
2475 && !is_loop_header_bb_p (gimple_bb (def1
)))))))
2477 if (dump_enabled_p ())
2478 report_vect_op (MSG_NOTE
, def_stmt
, "detected reduction: ");
2482 if (def1
&& def1
== phi
2483 && (code
== COND_EXPR
2484 || !def2
|| gimple_nop_p (def2
)
2485 || !flow_bb_inside_loop_p (loop
, gimple_bb (def2
))
2486 || (def2
&& flow_bb_inside_loop_p (loop
, gimple_bb (def2
))
2487 && (is_gimple_assign (def2
)
2488 || is_gimple_call (def2
)
2489 || STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def2
))
2490 == vect_induction_def
2491 || (gimple_code (def2
) == GIMPLE_PHI
2492 && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def2
))
2493 == vect_internal_def
2494 && !is_loop_header_bb_p (gimple_bb (def2
)))))))
2496 if (check_reduction
)
2498 /* Swap operands (just for simplicity - so that the rest of the code
2499 can assume that the reduction variable is always the last (second)
2501 if (dump_enabled_p ())
2502 report_vect_op (MSG_NOTE
, def_stmt
,
2503 "detected reduction: need to swap operands: ");
2505 swap_ssa_operands (def_stmt
, gimple_assign_rhs1_ptr (def_stmt
),
2506 gimple_assign_rhs2_ptr (def_stmt
));
2508 if (CONSTANT_CLASS_P (gimple_assign_rhs1 (def_stmt
)))
2509 LOOP_VINFO_OPERANDS_SWAPPED (loop_info
) = true;
2513 if (dump_enabled_p ())
2514 report_vect_op (MSG_NOTE
, def_stmt
, "detected reduction: ");
2520 /* Try to find SLP reduction chain. */
2521 if (check_reduction
&& vect_is_slp_reduction (loop_info
, phi
, def_stmt
))
2523 if (dump_enabled_p ())
2524 report_vect_op (MSG_NOTE
, def_stmt
,
2525 "reduction: detected reduction chain: ");
2530 if (dump_enabled_p ())
2531 report_vect_op (MSG_MISSED_OPTIMIZATION
, def_stmt
,
2532 "reduction: unknown pattern: ");
2537 /* Wrapper around vect_is_simple_reduction_1, that won't modify code
2538 in-place. Arguments as there. */
2541 vect_is_simple_reduction (loop_vec_info loop_info
, gimple phi
,
2542 bool check_reduction
, bool *double_reduc
)
2544 return vect_is_simple_reduction_1 (loop_info
, phi
, check_reduction
,
2545 double_reduc
, false);
2548 /* Wrapper around vect_is_simple_reduction_1, which will modify code
2549 in-place if it enables detection of more reductions. Arguments
2553 vect_force_simple_reduction (loop_vec_info loop_info
, gimple phi
,
2554 bool check_reduction
, bool *double_reduc
)
2556 return vect_is_simple_reduction_1 (loop_info
, phi
, check_reduction
,
2557 double_reduc
, true);
2560 /* Calculate the cost of one scalar iteration of the loop. */
2562 vect_get_single_scalar_iteration_cost (loop_vec_info loop_vinfo
)
2564 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
);
2565 basic_block
*bbs
= LOOP_VINFO_BBS (loop_vinfo
);
2566 int nbbs
= loop
->num_nodes
, factor
, scalar_single_iter_cost
= 0;
2567 int innerloop_iters
, i
, stmt_cost
;
2569 /* Count statements in scalar loop. Using this as scalar cost for a single
2572 TODO: Add outer loop support.
2574 TODO: Consider assigning different costs to different scalar
2578 innerloop_iters
= 1;
2580 innerloop_iters
= 50; /* FIXME */
2582 for (i
= 0; i
< nbbs
; i
++)
2584 gimple_stmt_iterator si
;
2585 basic_block bb
= bbs
[i
];
2587 if (bb
->loop_father
== loop
->inner
)
2588 factor
= innerloop_iters
;
2592 for (si
= gsi_start_bb (bb
); !gsi_end_p (si
); gsi_next (&si
))
2594 gimple stmt
= gsi_stmt (si
);
2595 stmt_vec_info stmt_info
= vinfo_for_stmt (stmt
);
2597 if (!is_gimple_assign (stmt
) && !is_gimple_call (stmt
))
2600 /* Skip stmts that are not vectorized inside the loop. */
2602 && !STMT_VINFO_RELEVANT_P (stmt_info
)
2603 && (!STMT_VINFO_LIVE_P (stmt_info
)
2604 || !VECTORIZABLE_CYCLE_DEF (STMT_VINFO_DEF_TYPE (stmt_info
)))
2605 && !STMT_VINFO_IN_PATTERN_P (stmt_info
))
2608 if (STMT_VINFO_DATA_REF (vinfo_for_stmt (stmt
)))
2610 if (DR_IS_READ (STMT_VINFO_DATA_REF (vinfo_for_stmt (stmt
))))
2611 stmt_cost
= vect_get_stmt_cost (scalar_load
);
2613 stmt_cost
= vect_get_stmt_cost (scalar_store
);
2616 stmt_cost
= vect_get_stmt_cost (scalar_stmt
);
2618 scalar_single_iter_cost
+= stmt_cost
* factor
;
2621 return scalar_single_iter_cost
;
2624 /* Calculate cost of peeling the loop PEEL_ITERS_PROLOGUE times. */
2626 vect_get_known_peeling_cost (loop_vec_info loop_vinfo
, int peel_iters_prologue
,
2627 int *peel_iters_epilogue
,
2628 int scalar_single_iter_cost
,
2629 stmt_vector_for_cost
*prologue_cost_vec
,
2630 stmt_vector_for_cost
*epilogue_cost_vec
)
2633 int vf
= LOOP_VINFO_VECT_FACTOR (loop_vinfo
);
2635 if (!LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo
))
2637 *peel_iters_epilogue
= vf
/2;
2638 if (dump_enabled_p ())
2639 dump_printf_loc (MSG_NOTE
, vect_location
,
2640 "cost model: epilogue peel iters set to vf/2 "
2641 "because loop iterations are unknown .\n");
2643 /* If peeled iterations are known but number of scalar loop
2644 iterations are unknown, count a taken branch per peeled loop. */
2645 retval
= record_stmt_cost (prologue_cost_vec
, 2, cond_branch_taken
,
2646 NULL
, 0, vect_prologue
);
2650 int niters
= LOOP_VINFO_INT_NITERS (loop_vinfo
);
2651 peel_iters_prologue
= niters
< peel_iters_prologue
?
2652 niters
: peel_iters_prologue
;
2653 *peel_iters_epilogue
= (niters
- peel_iters_prologue
) % vf
;
2654 /* If we need to peel for gaps, but no peeling is required, we have to
2655 peel VF iterations. */
2656 if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo
) && !*peel_iters_epilogue
)
2657 *peel_iters_epilogue
= vf
;
2660 if (peel_iters_prologue
)
2661 retval
+= record_stmt_cost (prologue_cost_vec
,
2662 peel_iters_prologue
* scalar_single_iter_cost
,
2663 scalar_stmt
, NULL
, 0, vect_prologue
);
2664 if (*peel_iters_epilogue
)
2665 retval
+= record_stmt_cost (epilogue_cost_vec
,
2666 *peel_iters_epilogue
* scalar_single_iter_cost
,
2667 scalar_stmt
, NULL
, 0, vect_epilogue
);
2671 /* Function vect_estimate_min_profitable_iters
2673 Return the number of iterations required for the vector version of the
2674 loop to be profitable relative to the cost of the scalar version of the
2678 vect_estimate_min_profitable_iters (loop_vec_info loop_vinfo
,
2679 int *ret_min_profitable_niters
,
2680 int *ret_min_profitable_estimate
)
2682 int min_profitable_iters
;
2683 int min_profitable_estimate
;
2684 int peel_iters_prologue
;
2685 int peel_iters_epilogue
;
2686 unsigned vec_inside_cost
= 0;
2687 int vec_outside_cost
= 0;
2688 unsigned vec_prologue_cost
= 0;
2689 unsigned vec_epilogue_cost
= 0;
2690 int scalar_single_iter_cost
= 0;
2691 int scalar_outside_cost
= 0;
2692 int vf
= LOOP_VINFO_VECT_FACTOR (loop_vinfo
);
2693 int npeel
= LOOP_PEELING_FOR_ALIGNMENT (loop_vinfo
);
2694 void *target_cost_data
= LOOP_VINFO_TARGET_COST_DATA (loop_vinfo
);
2696 /* Cost model disabled. */
2697 if (unlimited_cost_model ())
2699 dump_printf_loc (MSG_NOTE
, vect_location
, "cost model disabled.\n");
2700 *ret_min_profitable_niters
= 0;
2701 *ret_min_profitable_estimate
= 0;
2705 /* Requires loop versioning tests to handle misalignment. */
2706 if (LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo
))
2708 /* FIXME: Make cost depend on complexity of individual check. */
2709 unsigned len
= LOOP_VINFO_MAY_MISALIGN_STMTS (loop_vinfo
).length ();
2710 (void) add_stmt_cost (target_cost_data
, len
, vector_stmt
, NULL
, 0,
2712 dump_printf (MSG_NOTE
,
2713 "cost model: Adding cost of checks for loop "
2714 "versioning to treat misalignment.\n");
2717 /* Requires loop versioning with alias checks. */
2718 if (LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo
))
2720 /* FIXME: Make cost depend on complexity of individual check. */
2721 unsigned len
= LOOP_VINFO_MAY_ALIAS_DDRS (loop_vinfo
).length ();
2722 (void) add_stmt_cost (target_cost_data
, len
, vector_stmt
, NULL
, 0,
2724 dump_printf (MSG_NOTE
,
2725 "cost model: Adding cost of checks for loop "
2726 "versioning aliasing.\n");
2729 if (LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo
)
2730 || LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo
))
2731 (void) add_stmt_cost (target_cost_data
, 1, cond_branch_taken
, NULL
, 0,
2734 /* Count statements in scalar loop. Using this as scalar cost for a single
2737 TODO: Add outer loop support.
2739 TODO: Consider assigning different costs to different scalar
2742 scalar_single_iter_cost
= vect_get_single_scalar_iteration_cost (loop_vinfo
);
2744 /* Add additional cost for the peeled instructions in prologue and epilogue
2747 FORNOW: If we don't know the value of peel_iters for prologue or epilogue
2748 at compile-time - we assume it's vf/2 (the worst would be vf-1).
2750 TODO: Build an expression that represents peel_iters for prologue and
2751 epilogue to be used in a run-time test. */
2755 peel_iters_prologue
= vf
/2;
2756 dump_printf (MSG_NOTE
, "cost model: "
2757 "prologue peel iters set to vf/2.\n");
2759 /* If peeling for alignment is unknown, loop bound of main loop becomes
2761 peel_iters_epilogue
= vf
/2;
2762 dump_printf (MSG_NOTE
, "cost model: "
2763 "epilogue peel iters set to vf/2 because "
2764 "peeling for alignment is unknown.\n");
2766 /* If peeled iterations are unknown, count a taken branch and a not taken
2767 branch per peeled loop. Even if scalar loop iterations are known,
2768 vector iterations are not known since peeled prologue iterations are
2769 not known. Hence guards remain the same. */
2770 (void) add_stmt_cost (target_cost_data
, 2, cond_branch_taken
,
2771 NULL
, 0, vect_prologue
);
2772 (void) add_stmt_cost (target_cost_data
, 2, cond_branch_not_taken
,
2773 NULL
, 0, vect_prologue
);
2774 /* FORNOW: Don't attempt to pass individual scalar instructions to
2775 the model; just assume linear cost for scalar iterations. */
2776 (void) add_stmt_cost (target_cost_data
,
2777 peel_iters_prologue
* scalar_single_iter_cost
,
2778 scalar_stmt
, NULL
, 0, vect_prologue
);
2779 (void) add_stmt_cost (target_cost_data
,
2780 peel_iters_epilogue
* scalar_single_iter_cost
,
2781 scalar_stmt
, NULL
, 0, vect_epilogue
);
2785 stmt_vector_for_cost prologue_cost_vec
, epilogue_cost_vec
;
2786 stmt_info_for_cost
*si
;
2788 void *data
= LOOP_VINFO_TARGET_COST_DATA (loop_vinfo
);
2790 prologue_cost_vec
.create (2);
2791 epilogue_cost_vec
.create (2);
2792 peel_iters_prologue
= npeel
;
2794 (void) vect_get_known_peeling_cost (loop_vinfo
, peel_iters_prologue
,
2795 &peel_iters_epilogue
,
2796 scalar_single_iter_cost
,
2798 &epilogue_cost_vec
);
2800 FOR_EACH_VEC_ELT (prologue_cost_vec
, j
, si
)
2802 struct _stmt_vec_info
*stmt_info
2803 = si
->stmt
? vinfo_for_stmt (si
->stmt
) : NULL
;
2804 (void) add_stmt_cost (data
, si
->count
, si
->kind
, stmt_info
,
2805 si
->misalign
, vect_prologue
);
2808 FOR_EACH_VEC_ELT (epilogue_cost_vec
, j
, si
)
2810 struct _stmt_vec_info
*stmt_info
2811 = si
->stmt
? vinfo_for_stmt (si
->stmt
) : NULL
;
2812 (void) add_stmt_cost (data
, si
->count
, si
->kind
, stmt_info
,
2813 si
->misalign
, vect_epilogue
);
2816 prologue_cost_vec
.release ();
2817 epilogue_cost_vec
.release ();
2820 /* FORNOW: The scalar outside cost is incremented in one of the
2823 1. The vectorizer checks for alignment and aliasing and generates
2824 a condition that allows dynamic vectorization. A cost model
2825 check is ANDED with the versioning condition. Hence scalar code
2826 path now has the added cost of the versioning check.
2828 if (cost > th & versioning_check)
2831 Hence run-time scalar is incremented by not-taken branch cost.
2833 2. The vectorizer then checks if a prologue is required. If the
2834 cost model check was not done before during versioning, it has to
2835 be done before the prologue check.
2838 prologue = scalar_iters
2843 if (prologue == num_iters)
2846 Hence the run-time scalar cost is incremented by a taken branch,
2847 plus a not-taken branch, plus a taken branch cost.
2849 3. The vectorizer then checks if an epilogue is required. If the
2850 cost model check was not done before during prologue check, it
2851 has to be done with the epilogue check.
2857 if (prologue == num_iters)
2860 if ((cost <= th) | (scalar_iters-prologue-epilogue == 0))
2863 Hence the run-time scalar cost should be incremented by 2 taken
2866 TODO: The back end may reorder the BBS's differently and reverse
2867 conditions/branch directions. Change the estimates below to
2868 something more reasonable. */
2870 /* If the number of iterations is known and we do not do versioning, we can
2871 decide whether to vectorize at compile time. Hence the scalar version
2872 do not carry cost model guard costs. */
2873 if (!LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo
)
2874 || LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo
)
2875 || LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo
))
2877 /* Cost model check occurs at versioning. */
2878 if (LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo
)
2879 || LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo
))
2880 scalar_outside_cost
+= vect_get_stmt_cost (cond_branch_not_taken
);
2883 /* Cost model check occurs at prologue generation. */
2884 if (LOOP_PEELING_FOR_ALIGNMENT (loop_vinfo
) < 0)
2885 scalar_outside_cost
+= 2 * vect_get_stmt_cost (cond_branch_taken
)
2886 + vect_get_stmt_cost (cond_branch_not_taken
);
2887 /* Cost model check occurs at epilogue generation. */
2889 scalar_outside_cost
+= 2 * vect_get_stmt_cost (cond_branch_taken
);
2893 /* Complete the target-specific cost calculations. */
2894 finish_cost (LOOP_VINFO_TARGET_COST_DATA (loop_vinfo
), &vec_prologue_cost
,
2895 &vec_inside_cost
, &vec_epilogue_cost
);
2897 vec_outside_cost
= (int)(vec_prologue_cost
+ vec_epilogue_cost
);
2899 /* Calculate number of iterations required to make the vector version
2900 profitable, relative to the loop bodies only. The following condition
2902 SIC * niters + SOC > VIC * ((niters-PL_ITERS-EP_ITERS)/VF) + VOC
2904 SIC = scalar iteration cost, VIC = vector iteration cost,
2905 VOC = vector outside cost, VF = vectorization factor,
2906 PL_ITERS = prologue iterations, EP_ITERS= epilogue iterations
2907 SOC = scalar outside cost for run time cost model check. */
2909 if ((scalar_single_iter_cost
* vf
) > (int) vec_inside_cost
)
2911 if (vec_outside_cost
<= 0)
2912 min_profitable_iters
= 1;
2915 min_profitable_iters
= ((vec_outside_cost
- scalar_outside_cost
) * vf
2916 - vec_inside_cost
* peel_iters_prologue
2917 - vec_inside_cost
* peel_iters_epilogue
)
2918 / ((scalar_single_iter_cost
* vf
)
2921 if ((scalar_single_iter_cost
* vf
* min_profitable_iters
)
2922 <= (((int) vec_inside_cost
* min_profitable_iters
)
2923 + (((int) vec_outside_cost
- scalar_outside_cost
) * vf
)))
2924 min_profitable_iters
++;
2927 /* vector version will never be profitable. */
2930 if (dump_enabled_p ())
2931 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
2932 "cost model: the vector iteration cost = %d "
2933 "divided by the scalar iteration cost = %d "
2934 "is greater or equal to the vectorization factor = %d"
2936 vec_inside_cost
, scalar_single_iter_cost
, vf
);
2937 *ret_min_profitable_niters
= -1;
2938 *ret_min_profitable_estimate
= -1;
2942 if (dump_enabled_p ())
2944 dump_printf_loc (MSG_NOTE
, vect_location
, "Cost model analysis: \n");
2945 dump_printf (MSG_NOTE
, " Vector inside of loop cost: %d\n",
2947 dump_printf (MSG_NOTE
, " Vector prologue cost: %d\n",
2949 dump_printf (MSG_NOTE
, " Vector epilogue cost: %d\n",
2951 dump_printf (MSG_NOTE
, " Scalar iteration cost: %d\n",
2952 scalar_single_iter_cost
);
2953 dump_printf (MSG_NOTE
, " Scalar outside cost: %d\n",
2954 scalar_outside_cost
);
2955 dump_printf (MSG_NOTE
, " Vector outside cost: %d\n",
2957 dump_printf (MSG_NOTE
, " prologue iterations: %d\n",
2958 peel_iters_prologue
);
2959 dump_printf (MSG_NOTE
, " epilogue iterations: %d\n",
2960 peel_iters_epilogue
);
2961 dump_printf (MSG_NOTE
,
2962 " Calculated minimum iters for profitability: %d\n",
2963 min_profitable_iters
);
2964 dump_printf (MSG_NOTE
, "\n");
2967 min_profitable_iters
=
2968 min_profitable_iters
< vf
? vf
: min_profitable_iters
;
2970 /* Because the condition we create is:
2971 if (niters <= min_profitable_iters)
2972 then skip the vectorized loop. */
2973 min_profitable_iters
--;
2975 if (dump_enabled_p ())
2976 dump_printf_loc (MSG_NOTE
, vect_location
,
2977 " Runtime profitability threshold = %d\n",
2978 min_profitable_iters
);
2980 *ret_min_profitable_niters
= min_profitable_iters
;
2982 /* Calculate number of iterations required to make the vector version
2983 profitable, relative to the loop bodies only.
2985 Non-vectorized variant is SIC * niters and it must win over vector
2986 variant on the expected loop trip count. The following condition must hold true:
2987 SIC * niters > VIC * ((niters-PL_ITERS-EP_ITERS)/VF) + VOC + SOC */
2989 if (vec_outside_cost
<= 0)
2990 min_profitable_estimate
= 1;
2993 min_profitable_estimate
= ((vec_outside_cost
+ scalar_outside_cost
) * vf
2994 - vec_inside_cost
* peel_iters_prologue
2995 - vec_inside_cost
* peel_iters_epilogue
)
2996 / ((scalar_single_iter_cost
* vf
)
2999 min_profitable_estimate
--;
3000 min_profitable_estimate
= MAX (min_profitable_estimate
, min_profitable_iters
);
3001 if (dump_enabled_p ())
3002 dump_printf_loc (MSG_NOTE
, vect_location
,
3003 " Static estimate profitability threshold = %d\n",
3004 min_profitable_iters
);
3006 *ret_min_profitable_estimate
= min_profitable_estimate
;
3010 /* TODO: Close dependency between vect_model_*_cost and vectorizable_*
3011 functions. Design better to avoid maintenance issues. */
3013 /* Function vect_model_reduction_cost.
3015 Models cost for a reduction operation, including the vector ops
3016 generated within the strip-mine loop, the initial definition before
3017 the loop, and the epilogue code that must be generated. */
3020 vect_model_reduction_cost (stmt_vec_info stmt_info
, enum tree_code reduc_code
,
3023 int prologue_cost
= 0, epilogue_cost
= 0;
3024 enum tree_code code
;
3027 gimple stmt
, orig_stmt
;
3029 enum machine_mode mode
;
3030 loop_vec_info loop_vinfo
= STMT_VINFO_LOOP_VINFO (stmt_info
);
3031 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
);
3032 void *target_cost_data
= LOOP_VINFO_TARGET_COST_DATA (loop_vinfo
);
3034 /* Cost of reduction op inside loop. */
3035 unsigned inside_cost
= add_stmt_cost (target_cost_data
, ncopies
, vector_stmt
,
3036 stmt_info
, 0, vect_body
);
3037 stmt
= STMT_VINFO_STMT (stmt_info
);
3039 switch (get_gimple_rhs_class (gimple_assign_rhs_code (stmt
)))
3041 case GIMPLE_SINGLE_RHS
:
3042 gcc_assert (TREE_OPERAND_LENGTH (gimple_assign_rhs1 (stmt
)) == ternary_op
);
3043 reduction_op
= TREE_OPERAND (gimple_assign_rhs1 (stmt
), 2);
3045 case GIMPLE_UNARY_RHS
:
3046 reduction_op
= gimple_assign_rhs1 (stmt
);
3048 case GIMPLE_BINARY_RHS
:
3049 reduction_op
= gimple_assign_rhs2 (stmt
);
3051 case GIMPLE_TERNARY_RHS
:
3052 reduction_op
= gimple_assign_rhs3 (stmt
);
3058 vectype
= get_vectype_for_scalar_type (TREE_TYPE (reduction_op
));
3061 if (dump_enabled_p ())
3063 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
3064 "unsupported data-type ");
3065 dump_generic_expr (MSG_MISSED_OPTIMIZATION
, TDF_SLIM
,
3066 TREE_TYPE (reduction_op
));
3067 dump_printf (MSG_MISSED_OPTIMIZATION
, "\n");
3072 mode
= TYPE_MODE (vectype
);
3073 orig_stmt
= STMT_VINFO_RELATED_STMT (stmt_info
);
3076 orig_stmt
= STMT_VINFO_STMT (stmt_info
);
3078 code
= gimple_assign_rhs_code (orig_stmt
);
3080 /* Add in cost for initial definition. */
3081 prologue_cost
+= add_stmt_cost (target_cost_data
, 1, scalar_to_vec
,
3082 stmt_info
, 0, vect_prologue
);
3084 /* Determine cost of epilogue code.
3086 We have a reduction operator that will reduce the vector in one statement.
3087 Also requires scalar extract. */
3089 if (!nested_in_vect_loop_p (loop
, orig_stmt
))
3091 if (reduc_code
!= ERROR_MARK
)
3093 epilogue_cost
+= add_stmt_cost (target_cost_data
, 1, vector_stmt
,
3094 stmt_info
, 0, vect_epilogue
);
3095 epilogue_cost
+= add_stmt_cost (target_cost_data
, 1, vec_to_scalar
,
3096 stmt_info
, 0, vect_epilogue
);
3100 int vec_size_in_bits
= tree_low_cst (TYPE_SIZE (vectype
), 1);
3102 TYPE_SIZE (TREE_TYPE (gimple_assign_lhs (orig_stmt
)));
3103 int element_bitsize
= tree_low_cst (bitsize
, 1);
3104 int nelements
= vec_size_in_bits
/ element_bitsize
;
3106 optab
= optab_for_tree_code (code
, vectype
, optab_default
);
3108 /* We have a whole vector shift available. */
3109 if (VECTOR_MODE_P (mode
)
3110 && optab_handler (optab
, mode
) != CODE_FOR_nothing
3111 && optab_handler (vec_shr_optab
, mode
) != CODE_FOR_nothing
)
3113 /* Final reduction via vector shifts and the reduction operator.
3114 Also requires scalar extract. */
3115 epilogue_cost
+= add_stmt_cost (target_cost_data
,
3116 exact_log2 (nelements
) * 2,
3117 vector_stmt
, stmt_info
, 0,
3119 epilogue_cost
+= add_stmt_cost (target_cost_data
, 1,
3120 vec_to_scalar
, stmt_info
, 0,
3124 /* Use extracts and reduction op for final reduction. For N
3125 elements, we have N extracts and N-1 reduction ops. */
3126 epilogue_cost
+= add_stmt_cost (target_cost_data
,
3127 nelements
+ nelements
- 1,
3128 vector_stmt
, stmt_info
, 0,
3133 if (dump_enabled_p ())
3134 dump_printf (MSG_NOTE
,
3135 "vect_model_reduction_cost: inside_cost = %d, "
3136 "prologue_cost = %d, epilogue_cost = %d .\n", inside_cost
,
3137 prologue_cost
, epilogue_cost
);
3143 /* Function vect_model_induction_cost.
3145 Models cost for induction operations. */
3148 vect_model_induction_cost (stmt_vec_info stmt_info
, int ncopies
)
3150 loop_vec_info loop_vinfo
= STMT_VINFO_LOOP_VINFO (stmt_info
);
3151 void *target_cost_data
= LOOP_VINFO_TARGET_COST_DATA (loop_vinfo
);
3152 unsigned inside_cost
, prologue_cost
;
3154 /* loop cost for vec_loop. */
3155 inside_cost
= add_stmt_cost (target_cost_data
, ncopies
, vector_stmt
,
3156 stmt_info
, 0, vect_body
);
3158 /* prologue cost for vec_init and vec_step. */
3159 prologue_cost
= add_stmt_cost (target_cost_data
, 2, scalar_to_vec
,
3160 stmt_info
, 0, vect_prologue
);
3162 if (dump_enabled_p ())
3163 dump_printf_loc (MSG_NOTE
, vect_location
,
3164 "vect_model_induction_cost: inside_cost = %d, "
3165 "prologue_cost = %d .\n", inside_cost
, prologue_cost
);
3169 /* Function get_initial_def_for_induction
3172 STMT - a stmt that performs an induction operation in the loop.
3173 IV_PHI - the initial value of the induction variable
3176 Return a vector variable, initialized with the first VF values of
3177 the induction variable. E.g., for an iv with IV_PHI='X' and
3178 evolution S, for a vector of 4 units, we want to return:
3179 [X, X + S, X + 2*S, X + 3*S]. */
3182 get_initial_def_for_induction (gimple iv_phi
)
3184 stmt_vec_info stmt_vinfo
= vinfo_for_stmt (iv_phi
);
3185 loop_vec_info loop_vinfo
= STMT_VINFO_LOOP_VINFO (stmt_vinfo
);
3186 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
);
3189 edge pe
= loop_preheader_edge (loop
);
3190 struct loop
*iv_loop
;
3192 tree new_vec
, vec_init
, vec_step
, t
;
3196 gimple init_stmt
, induction_phi
, new_stmt
;
3197 tree induc_def
, vec_def
, vec_dest
;
3198 tree init_expr
, step_expr
;
3199 int vf
= LOOP_VINFO_VECT_FACTOR (loop_vinfo
);
3204 stmt_vec_info phi_info
= vinfo_for_stmt (iv_phi
);
3205 bool nested_in_vect_loop
= false;
3206 gimple_seq stmts
= NULL
;
3207 imm_use_iterator imm_iter
;
3208 use_operand_p use_p
;
3212 gimple_stmt_iterator si
;
3213 basic_block bb
= gimple_bb (iv_phi
);
3217 /* Is phi in an inner-loop, while vectorizing an enclosing outer-loop? */
3218 if (nested_in_vect_loop_p (loop
, iv_phi
))
3220 nested_in_vect_loop
= true;
3221 iv_loop
= loop
->inner
;
3225 gcc_assert (iv_loop
== (gimple_bb (iv_phi
))->loop_father
);
3227 latch_e
= loop_latch_edge (iv_loop
);
3228 loop_arg
= PHI_ARG_DEF_FROM_EDGE (iv_phi
, latch_e
);
3230 access_fn
= analyze_scalar_evolution (iv_loop
, PHI_RESULT (iv_phi
));
3231 gcc_assert (access_fn
);
3232 STRIP_NOPS (access_fn
);
3233 ok
= vect_is_simple_iv_evolution (iv_loop
->num
, access_fn
,
3234 &init_expr
, &step_expr
);
3236 pe
= loop_preheader_edge (iv_loop
);
3238 vectype
= get_vectype_for_scalar_type (TREE_TYPE (init_expr
));
3239 resvectype
= get_vectype_for_scalar_type (TREE_TYPE (PHI_RESULT (iv_phi
)));
3240 gcc_assert (vectype
);
3241 nunits
= TYPE_VECTOR_SUBPARTS (vectype
);
3242 ncopies
= vf
/ nunits
;
3244 gcc_assert (phi_info
);
3245 gcc_assert (ncopies
>= 1);
3247 /* Find the first insertion point in the BB. */
3248 si
= gsi_after_labels (bb
);
3250 /* Create the vector that holds the initial_value of the induction. */
3251 if (nested_in_vect_loop
)
3253 /* iv_loop is nested in the loop to be vectorized. init_expr had already
3254 been created during vectorization of previous stmts. We obtain it
3255 from the STMT_VINFO_VEC_STMT of the defining stmt. */
3256 tree iv_def
= PHI_ARG_DEF_FROM_EDGE (iv_phi
,
3257 loop_preheader_edge (iv_loop
));
3258 vec_init
= vect_get_vec_def_for_operand (iv_def
, iv_phi
, NULL
);
3259 /* If the initial value is not of proper type, convert it. */
3260 if (!useless_type_conversion_p (vectype
, TREE_TYPE (vec_init
)))
3262 new_stmt
= gimple_build_assign_with_ops
3264 vect_get_new_vect_var (vectype
, vect_simple_var
, "vec_iv_"),
3265 build1 (VIEW_CONVERT_EXPR
, vectype
, vec_init
), NULL_TREE
);
3266 vec_init
= make_ssa_name (gimple_assign_lhs (new_stmt
), new_stmt
);
3267 gimple_assign_set_lhs (new_stmt
, vec_init
);
3268 new_bb
= gsi_insert_on_edge_immediate (loop_preheader_edge (iv_loop
),
3270 gcc_assert (!new_bb
);
3271 set_vinfo_for_stmt (new_stmt
,
3272 new_stmt_vec_info (new_stmt
, loop_vinfo
, NULL
));
3277 vec
<constructor_elt
, va_gc
> *v
;
3279 /* iv_loop is the loop to be vectorized. Create:
3280 vec_init = [X, X+S, X+2*S, X+3*S] (S = step_expr, X = init_expr) */
3281 new_var
= vect_get_new_vect_var (TREE_TYPE (vectype
),
3282 vect_scalar_var
, "var_");
3283 new_name
= force_gimple_operand (fold_convert (TREE_TYPE (vectype
),
3285 &stmts
, false, new_var
);
3288 new_bb
= gsi_insert_seq_on_edge_immediate (pe
, stmts
);
3289 gcc_assert (!new_bb
);
3292 vec_alloc (v
, nunits
);
3293 bool constant_p
= is_gimple_min_invariant (new_name
);
3294 CONSTRUCTOR_APPEND_ELT (v
, NULL_TREE
, new_name
);
3295 for (i
= 1; i
< nunits
; i
++)
3297 /* Create: new_name_i = new_name + step_expr */
3298 new_name
= fold_build2 (PLUS_EXPR
, TREE_TYPE (new_name
),
3299 new_name
, step_expr
);
3300 if (!is_gimple_min_invariant (new_name
))
3302 init_stmt
= gimple_build_assign (new_var
, new_name
);
3303 new_name
= make_ssa_name (new_var
, init_stmt
);
3304 gimple_assign_set_lhs (init_stmt
, new_name
);
3305 new_bb
= gsi_insert_on_edge_immediate (pe
, init_stmt
);
3306 gcc_assert (!new_bb
);
3307 if (dump_enabled_p ())
3309 dump_printf_loc (MSG_NOTE
, vect_location
,
3310 "created new init_stmt: ");
3311 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, init_stmt
, 0);
3312 dump_printf (MSG_NOTE
, "\n");
3316 CONSTRUCTOR_APPEND_ELT (v
, NULL_TREE
, new_name
);
3318 /* Create a vector from [new_name_0, new_name_1, ..., new_name_nunits-1] */
3320 new_vec
= build_vector_from_ctor (vectype
, v
);
3322 new_vec
= build_constructor (vectype
, v
);
3323 vec_init
= vect_init_vector (iv_phi
, new_vec
, vectype
, NULL
);
3327 /* Create the vector that holds the step of the induction. */
3328 if (nested_in_vect_loop
)
3329 /* iv_loop is nested in the loop to be vectorized. Generate:
3330 vec_step = [S, S, S, S] */
3331 new_name
= step_expr
;
3334 /* iv_loop is the loop to be vectorized. Generate:
3335 vec_step = [VF*S, VF*S, VF*S, VF*S] */
3336 if (SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr
)))
3338 expr
= build_int_cst (integer_type_node
, vf
);
3339 expr
= fold_convert (TREE_TYPE (step_expr
), expr
);
3342 expr
= build_int_cst (TREE_TYPE (step_expr
), vf
);
3343 new_name
= fold_build2 (MULT_EXPR
, TREE_TYPE (step_expr
),
3345 if (TREE_CODE (step_expr
) == SSA_NAME
)
3346 new_name
= vect_init_vector (iv_phi
, new_name
,
3347 TREE_TYPE (step_expr
), NULL
);
3350 t
= unshare_expr (new_name
);
3351 gcc_assert (CONSTANT_CLASS_P (new_name
)
3352 || TREE_CODE (new_name
) == SSA_NAME
);
3353 stepvectype
= get_vectype_for_scalar_type (TREE_TYPE (new_name
));
3354 gcc_assert (stepvectype
);
3355 new_vec
= build_vector_from_val (stepvectype
, t
);
3356 vec_step
= vect_init_vector (iv_phi
, new_vec
, stepvectype
, NULL
);
3359 /* Create the following def-use cycle:
3364 vec_iv = PHI <vec_init, vec_loop>
3368 vec_loop = vec_iv + vec_step; */
3370 /* Create the induction-phi that defines the induction-operand. */
3371 vec_dest
= vect_get_new_vect_var (vectype
, vect_simple_var
, "vec_iv_");
3372 induction_phi
= create_phi_node (vec_dest
, iv_loop
->header
);
3373 set_vinfo_for_stmt (induction_phi
,
3374 new_stmt_vec_info (induction_phi
, loop_vinfo
, NULL
));
3375 induc_def
= PHI_RESULT (induction_phi
);
3377 /* Create the iv update inside the loop */
3378 new_stmt
= gimple_build_assign_with_ops (PLUS_EXPR
, vec_dest
,
3379 induc_def
, vec_step
);
3380 vec_def
= make_ssa_name (vec_dest
, new_stmt
);
3381 gimple_assign_set_lhs (new_stmt
, vec_def
);
3382 gsi_insert_before (&si
, new_stmt
, GSI_SAME_STMT
);
3383 set_vinfo_for_stmt (new_stmt
, new_stmt_vec_info (new_stmt
, loop_vinfo
,
3386 /* Set the arguments of the phi node: */
3387 add_phi_arg (induction_phi
, vec_init
, pe
, UNKNOWN_LOCATION
);
3388 add_phi_arg (induction_phi
, vec_def
, loop_latch_edge (iv_loop
),
3392 /* In case that vectorization factor (VF) is bigger than the number
3393 of elements that we can fit in a vectype (nunits), we have to generate
3394 more than one vector stmt - i.e - we need to "unroll" the
3395 vector stmt by a factor VF/nunits. For more details see documentation
3396 in vectorizable_operation. */
3400 stmt_vec_info prev_stmt_vinfo
;
3401 /* FORNOW. This restriction should be relaxed. */
3402 gcc_assert (!nested_in_vect_loop
);
3404 /* Create the vector that holds the step of the induction. */
3405 if (SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr
)))
3407 expr
= build_int_cst (integer_type_node
, nunits
);
3408 expr
= fold_convert (TREE_TYPE (step_expr
), expr
);
3411 expr
= build_int_cst (TREE_TYPE (step_expr
), nunits
);
3412 new_name
= fold_build2 (MULT_EXPR
, TREE_TYPE (step_expr
),
3414 if (TREE_CODE (step_expr
) == SSA_NAME
)
3415 new_name
= vect_init_vector (iv_phi
, new_name
,
3416 TREE_TYPE (step_expr
), NULL
);
3417 t
= unshare_expr (new_name
);
3418 gcc_assert (CONSTANT_CLASS_P (new_name
)
3419 || TREE_CODE (new_name
) == SSA_NAME
);
3420 new_vec
= build_vector_from_val (stepvectype
, t
);
3421 vec_step
= vect_init_vector (iv_phi
, new_vec
, stepvectype
, NULL
);
3423 vec_def
= induc_def
;
3424 prev_stmt_vinfo
= vinfo_for_stmt (induction_phi
);
3425 for (i
= 1; i
< ncopies
; i
++)
3427 /* vec_i = vec_prev + vec_step */
3428 new_stmt
= gimple_build_assign_with_ops (PLUS_EXPR
, vec_dest
,
3430 vec_def
= make_ssa_name (vec_dest
, new_stmt
);
3431 gimple_assign_set_lhs (new_stmt
, vec_def
);
3433 gsi_insert_before (&si
, new_stmt
, GSI_SAME_STMT
);
3434 if (!useless_type_conversion_p (resvectype
, vectype
))
3436 new_stmt
= gimple_build_assign_with_ops
3438 vect_get_new_vect_var (resvectype
, vect_simple_var
,
3440 build1 (VIEW_CONVERT_EXPR
, resvectype
,
3441 gimple_assign_lhs (new_stmt
)), NULL_TREE
);
3442 gimple_assign_set_lhs (new_stmt
,
3444 (gimple_assign_lhs (new_stmt
), new_stmt
));
3445 gsi_insert_before (&si
, new_stmt
, GSI_SAME_STMT
);
3447 set_vinfo_for_stmt (new_stmt
,
3448 new_stmt_vec_info (new_stmt
, loop_vinfo
, NULL
));
3449 STMT_VINFO_RELATED_STMT (prev_stmt_vinfo
) = new_stmt
;
3450 prev_stmt_vinfo
= vinfo_for_stmt (new_stmt
);
3454 if (nested_in_vect_loop
)
3456 /* Find the loop-closed exit-phi of the induction, and record
3457 the final vector of induction results: */
3459 FOR_EACH_IMM_USE_FAST (use_p
, imm_iter
, loop_arg
)
3461 if (!flow_bb_inside_loop_p (iv_loop
, gimple_bb (USE_STMT (use_p
))))
3463 exit_phi
= USE_STMT (use_p
);
3469 stmt_vec_info stmt_vinfo
= vinfo_for_stmt (exit_phi
);
3470 /* FORNOW. Currently not supporting the case that an inner-loop induction
3471 is not used in the outer-loop (i.e. only outside the outer-loop). */
3472 gcc_assert (STMT_VINFO_RELEVANT_P (stmt_vinfo
)
3473 && !STMT_VINFO_LIVE_P (stmt_vinfo
));
3475 STMT_VINFO_VEC_STMT (stmt_vinfo
) = new_stmt
;
3476 if (dump_enabled_p ())
3478 dump_printf_loc (MSG_NOTE
, vect_location
,
3479 "vector of inductions after inner-loop:");
3480 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, new_stmt
, 0);
3481 dump_printf (MSG_NOTE
, "\n");
3487 if (dump_enabled_p ())
3489 dump_printf_loc (MSG_NOTE
, vect_location
,
3490 "transform induction: created def-use cycle: ");
3491 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, induction_phi
, 0);
3492 dump_printf (MSG_NOTE
, "\n");
3493 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
,
3494 SSA_NAME_DEF_STMT (vec_def
), 0);
3495 dump_printf (MSG_NOTE
, "\n");
3498 STMT_VINFO_VEC_STMT (phi_info
) = induction_phi
;
3499 if (!useless_type_conversion_p (resvectype
, vectype
))
3501 new_stmt
= gimple_build_assign_with_ops
3503 vect_get_new_vect_var (resvectype
, vect_simple_var
, "vec_iv_"),
3504 build1 (VIEW_CONVERT_EXPR
, resvectype
, induc_def
), NULL_TREE
);
3505 induc_def
= make_ssa_name (gimple_assign_lhs (new_stmt
), new_stmt
);
3506 gimple_assign_set_lhs (new_stmt
, induc_def
);
3507 si
= gsi_after_labels (bb
);
3508 gsi_insert_before (&si
, new_stmt
, GSI_SAME_STMT
);
3509 set_vinfo_for_stmt (new_stmt
,
3510 new_stmt_vec_info (new_stmt
, loop_vinfo
, NULL
));
3511 STMT_VINFO_RELATED_STMT (vinfo_for_stmt (new_stmt
))
3512 = STMT_VINFO_RELATED_STMT (vinfo_for_stmt (induction_phi
));
3519 /* Function get_initial_def_for_reduction
3522 STMT - a stmt that performs a reduction operation in the loop.
3523 INIT_VAL - the initial value of the reduction variable
3526 ADJUSTMENT_DEF - a tree that holds a value to be added to the final result
3527 of the reduction (used for adjusting the epilog - see below).
3528 Return a vector variable, initialized according to the operation that STMT
3529 performs. This vector will be used as the initial value of the
3530 vector of partial results.
3532 Option1 (adjust in epilog): Initialize the vector as follows:
3533 add/bit or/xor: [0,0,...,0,0]
3534 mult/bit and: [1,1,...,1,1]
3535 min/max/cond_expr: [init_val,init_val,..,init_val,init_val]
3536 and when necessary (e.g. add/mult case) let the caller know
3537 that it needs to adjust the result by init_val.
3539 Option2: Initialize the vector as follows:
3540 add/bit or/xor: [init_val,0,0,...,0]
3541 mult/bit and: [init_val,1,1,...,1]
3542 min/max/cond_expr: [init_val,init_val,...,init_val]
3543 and no adjustments are needed.
3545 For example, for the following code:
3551 STMT is 's = s + a[i]', and the reduction variable is 's'.
3552 For a vector of 4 units, we want to return either [0,0,0,init_val],
3553 or [0,0,0,0] and let the caller know that it needs to adjust
3554 the result at the end by 'init_val'.
3556 FORNOW, we are using the 'adjust in epilog' scheme, because this way the
3557 initialization vector is simpler (same element in all entries), if
3558 ADJUSTMENT_DEF is not NULL, and Option2 otherwise.
3560 A cost model should help decide between these two schemes. */
3563 get_initial_def_for_reduction (gimple stmt
, tree init_val
,
3564 tree
*adjustment_def
)
3566 stmt_vec_info stmt_vinfo
= vinfo_for_stmt (stmt
);
3567 loop_vec_info loop_vinfo
= STMT_VINFO_LOOP_VINFO (stmt_vinfo
);
3568 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
);
3569 tree scalar_type
= TREE_TYPE (init_val
);
3570 tree vectype
= get_vectype_for_scalar_type (scalar_type
);
3572 enum tree_code code
= gimple_assign_rhs_code (stmt
);
3577 bool nested_in_vect_loop
= false;
3579 REAL_VALUE_TYPE real_init_val
= dconst0
;
3580 int int_init_val
= 0;
3581 gimple def_stmt
= NULL
;
3583 gcc_assert (vectype
);
3584 nunits
= TYPE_VECTOR_SUBPARTS (vectype
);
3586 gcc_assert (POINTER_TYPE_P (scalar_type
) || INTEGRAL_TYPE_P (scalar_type
)
3587 || SCALAR_FLOAT_TYPE_P (scalar_type
));
3589 if (nested_in_vect_loop_p (loop
, stmt
))
3590 nested_in_vect_loop
= true;
3592 gcc_assert (loop
== (gimple_bb (stmt
))->loop_father
);
3594 /* In case of double reduction we only create a vector variable to be put
3595 in the reduction phi node. The actual statement creation is done in
3596 vect_create_epilog_for_reduction. */
3597 if (adjustment_def
&& nested_in_vect_loop
3598 && TREE_CODE (init_val
) == SSA_NAME
3599 && (def_stmt
= SSA_NAME_DEF_STMT (init_val
))
3600 && gimple_code (def_stmt
) == GIMPLE_PHI
3601 && flow_bb_inside_loop_p (loop
, gimple_bb (def_stmt
))
3602 && vinfo_for_stmt (def_stmt
)
3603 && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt
))
3604 == vect_double_reduction_def
)
3606 *adjustment_def
= NULL
;
3607 return vect_create_destination_var (init_val
, vectype
);
3610 if (TREE_CONSTANT (init_val
))
3612 if (SCALAR_FLOAT_TYPE_P (scalar_type
))
3613 init_value
= build_real (scalar_type
, TREE_REAL_CST (init_val
));
3615 init_value
= build_int_cst (scalar_type
, TREE_INT_CST_LOW (init_val
));
3618 init_value
= init_val
;
3622 case WIDEN_SUM_EXPR
:
3630 /* ADJUSMENT_DEF is NULL when called from
3631 vect_create_epilog_for_reduction to vectorize double reduction. */
3634 if (nested_in_vect_loop
)
3635 *adjustment_def
= vect_get_vec_def_for_operand (init_val
, stmt
,
3638 *adjustment_def
= init_val
;
3641 if (code
== MULT_EXPR
)
3643 real_init_val
= dconst1
;
3647 if (code
== BIT_AND_EXPR
)
3650 if (SCALAR_FLOAT_TYPE_P (scalar_type
))
3651 def_for_init
= build_real (scalar_type
, real_init_val
);
3653 def_for_init
= build_int_cst (scalar_type
, int_init_val
);
3655 /* Create a vector of '0' or '1' except the first element. */
3656 elts
= XALLOCAVEC (tree
, nunits
);
3657 for (i
= nunits
- 2; i
>= 0; --i
)
3658 elts
[i
+ 1] = def_for_init
;
3660 /* Option1: the first element is '0' or '1' as well. */
3663 elts
[0] = def_for_init
;
3664 init_def
= build_vector (vectype
, elts
);
3668 /* Option2: the first element is INIT_VAL. */
3670 if (TREE_CONSTANT (init_val
))
3671 init_def
= build_vector (vectype
, elts
);
3674 vec
<constructor_elt
, va_gc
> *v
;
3675 vec_alloc (v
, nunits
);
3676 CONSTRUCTOR_APPEND_ELT (v
, NULL_TREE
, init_val
);
3677 for (i
= 1; i
< nunits
; ++i
)
3678 CONSTRUCTOR_APPEND_ELT (v
, NULL_TREE
, elts
[i
]);
3679 init_def
= build_constructor (vectype
, v
);
3689 *adjustment_def
= NULL_TREE
;
3690 init_def
= vect_get_vec_def_for_operand (init_val
, stmt
, NULL
);
3694 init_def
= build_vector_from_val (vectype
, init_value
);
3705 /* Function vect_create_epilog_for_reduction
3707 Create code at the loop-epilog to finalize the result of a reduction
3710 VECT_DEFS is list of vector of partial results, i.e., the lhs's of vector
3711 reduction statements.
3712 STMT is the scalar reduction stmt that is being vectorized.
3713 NCOPIES is > 1 in case the vectorization factor (VF) is bigger than the
3714 number of elements that we can fit in a vectype (nunits). In this case
3715 we have to generate more than one vector stmt - i.e - we need to "unroll"
3716 the vector stmt by a factor VF/nunits. For more details see documentation
3717 in vectorizable_operation.
3718 REDUC_CODE is the tree-code for the epilog reduction.
3719 REDUCTION_PHIS is a list of the phi-nodes that carry the reduction
3721 REDUC_INDEX is the index of the operand in the right hand side of the
3722 statement that is defined by REDUCTION_PHI.
3723 DOUBLE_REDUC is TRUE if double reduction phi nodes should be handled.
3724 SLP_NODE is an SLP node containing a group of reduction statements. The
3725 first one in this group is STMT.
3728 1. Creates the reduction def-use cycles: sets the arguments for
3730 The loop-entry argument is the vectorized initial-value of the reduction.
3731 The loop-latch argument is taken from VECT_DEFS - the vector of partial
3733 2. "Reduces" each vector of partial results VECT_DEFS into a single result,
3734 by applying the operation specified by REDUC_CODE if available, or by
3735 other means (whole-vector shifts or a scalar loop).
3736 The function also creates a new phi node at the loop exit to preserve
3737 loop-closed form, as illustrated below.
3739 The flow at the entry to this function:
3742 vec_def = phi <null, null> # REDUCTION_PHI
3743 VECT_DEF = vector_stmt # vectorized form of STMT
3744 s_loop = scalar_stmt # (scalar) STMT
3746 s_out0 = phi <s_loop> # (scalar) EXIT_PHI
3750 The above is transformed by this function into:
3753 vec_def = phi <vec_init, VECT_DEF> # REDUCTION_PHI
3754 VECT_DEF = vector_stmt # vectorized form of STMT
3755 s_loop = scalar_stmt # (scalar) STMT
3757 s_out0 = phi <s_loop> # (scalar) EXIT_PHI
3758 v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI
3759 v_out2 = reduce <v_out1>
3760 s_out3 = extract_field <v_out2, 0>
3761 s_out4 = adjust_result <s_out3>
3767 vect_create_epilog_for_reduction (vec
<tree
> vect_defs
, gimple stmt
,
3768 int ncopies
, enum tree_code reduc_code
,
3769 vec
<gimple
> reduction_phis
,
3770 int reduc_index
, bool double_reduc
,
3773 stmt_vec_info stmt_info
= vinfo_for_stmt (stmt
);
3774 stmt_vec_info prev_phi_info
;
3776 enum machine_mode mode
;
3777 loop_vec_info loop_vinfo
= STMT_VINFO_LOOP_VINFO (stmt_info
);
3778 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
), *outer_loop
= NULL
;
3779 basic_block exit_bb
;
3782 gimple new_phi
= NULL
, phi
;
3783 gimple_stmt_iterator exit_gsi
;
3785 tree new_temp
= NULL_TREE
, new_dest
, new_name
, new_scalar_dest
;
3786 gimple epilog_stmt
= NULL
;
3787 enum tree_code code
= gimple_assign_rhs_code (stmt
);
3789 tree bitsize
, bitpos
;
3790 tree adjustment_def
= NULL
;
3791 tree vec_initial_def
= NULL
;
3792 tree reduction_op
, expr
, def
;
3793 tree orig_name
, scalar_result
;
3794 imm_use_iterator imm_iter
, phi_imm_iter
;
3795 use_operand_p use_p
, phi_use_p
;
3796 bool extract_scalar_result
= false;
3797 gimple use_stmt
, orig_stmt
, reduction_phi
= NULL
;
3798 bool nested_in_vect_loop
= false;
3799 vec
<gimple
> new_phis
= vNULL
;
3800 vec
<gimple
> inner_phis
= vNULL
;
3801 enum vect_def_type dt
= vect_unknown_def_type
;
3803 vec
<tree
> scalar_results
= vNULL
;
3804 unsigned int group_size
= 1, k
, ratio
;
3805 vec
<tree
> vec_initial_defs
= vNULL
;
3807 bool slp_reduc
= false;
3808 tree new_phi_result
;
3809 gimple inner_phi
= NULL
;
3812 group_size
= SLP_TREE_SCALAR_STMTS (slp_node
).length ();
3814 if (nested_in_vect_loop_p (loop
, stmt
))
3818 nested_in_vect_loop
= true;
3819 gcc_assert (!slp_node
);
3822 switch (get_gimple_rhs_class (gimple_assign_rhs_code (stmt
)))
3824 case GIMPLE_SINGLE_RHS
:
3825 gcc_assert (TREE_OPERAND_LENGTH (gimple_assign_rhs1 (stmt
))
3827 reduction_op
= TREE_OPERAND (gimple_assign_rhs1 (stmt
), reduc_index
);
3829 case GIMPLE_UNARY_RHS
:
3830 reduction_op
= gimple_assign_rhs1 (stmt
);
3832 case GIMPLE_BINARY_RHS
:
3833 reduction_op
= reduc_index
?
3834 gimple_assign_rhs2 (stmt
) : gimple_assign_rhs1 (stmt
);
3836 case GIMPLE_TERNARY_RHS
:
3837 reduction_op
= gimple_op (stmt
, reduc_index
+ 1);
3843 vectype
= get_vectype_for_scalar_type (TREE_TYPE (reduction_op
));
3844 gcc_assert (vectype
);
3845 mode
= TYPE_MODE (vectype
);
3847 /* 1. Create the reduction def-use cycle:
3848 Set the arguments of REDUCTION_PHIS, i.e., transform
3851 vec_def = phi <null, null> # REDUCTION_PHI
3852 VECT_DEF = vector_stmt # vectorized form of STMT
3858 vec_def = phi <vec_init, VECT_DEF> # REDUCTION_PHI
3859 VECT_DEF = vector_stmt # vectorized form of STMT
3862 (in case of SLP, do it for all the phis). */
3864 /* Get the loop-entry arguments. */
3866 vect_get_vec_defs (reduction_op
, NULL_TREE
, stmt
, &vec_initial_defs
,
3867 NULL
, slp_node
, reduc_index
);
3870 vec_initial_defs
.create (1);
3871 /* For the case of reduction, vect_get_vec_def_for_operand returns
3872 the scalar def before the loop, that defines the initial value
3873 of the reduction variable. */
3874 vec_initial_def
= vect_get_vec_def_for_operand (reduction_op
, stmt
,
3876 vec_initial_defs
.quick_push (vec_initial_def
);
3879 /* Set phi nodes arguments. */
3880 FOR_EACH_VEC_ELT (reduction_phis
, i
, phi
)
3882 tree vec_init_def
= vec_initial_defs
[i
];
3883 tree def
= vect_defs
[i
];
3884 for (j
= 0; j
< ncopies
; j
++)
3886 /* Set the loop-entry arg of the reduction-phi. */
3887 add_phi_arg (phi
, vec_init_def
, loop_preheader_edge (loop
),
3890 /* Set the loop-latch arg for the reduction-phi. */
3892 def
= vect_get_vec_def_for_stmt_copy (vect_unknown_def_type
, def
);
3894 add_phi_arg (phi
, def
, loop_latch_edge (loop
), UNKNOWN_LOCATION
);
3896 if (dump_enabled_p ())
3898 dump_printf_loc (MSG_NOTE
, vect_location
,
3899 "transform reduction: created def-use cycle: ");
3900 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, phi
, 0);
3901 dump_printf (MSG_NOTE
, "\n");
3902 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, SSA_NAME_DEF_STMT (def
), 0);
3903 dump_printf (MSG_NOTE
, "\n");
3906 phi
= STMT_VINFO_RELATED_STMT (vinfo_for_stmt (phi
));
3910 vec_initial_defs
.release ();
3912 /* 2. Create epilog code.
3913 The reduction epilog code operates across the elements of the vector
3914 of partial results computed by the vectorized loop.
3915 The reduction epilog code consists of:
3917 step 1: compute the scalar result in a vector (v_out2)
3918 step 2: extract the scalar result (s_out3) from the vector (v_out2)
3919 step 3: adjust the scalar result (s_out3) if needed.
3921 Step 1 can be accomplished using one the following three schemes:
3922 (scheme 1) using reduc_code, if available.
3923 (scheme 2) using whole-vector shifts, if available.
3924 (scheme 3) using a scalar loop. In this case steps 1+2 above are
3927 The overall epilog code looks like this:
3929 s_out0 = phi <s_loop> # original EXIT_PHI
3930 v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI
3931 v_out2 = reduce <v_out1> # step 1
3932 s_out3 = extract_field <v_out2, 0> # step 2
3933 s_out4 = adjust_result <s_out3> # step 3
3935 (step 3 is optional, and steps 1 and 2 may be combined).
3936 Lastly, the uses of s_out0 are replaced by s_out4. */
3939 /* 2.1 Create new loop-exit-phis to preserve loop-closed form:
3940 v_out1 = phi <VECT_DEF>
3941 Store them in NEW_PHIS. */
3943 exit_bb
= single_exit (loop
)->dest
;
3944 prev_phi_info
= NULL
;
3945 new_phis
.create (vect_defs
.length ());
3946 FOR_EACH_VEC_ELT (vect_defs
, i
, def
)
3948 for (j
= 0; j
< ncopies
; j
++)
3950 tree new_def
= copy_ssa_name (def
, NULL
);
3951 phi
= create_phi_node (new_def
, exit_bb
);
3952 set_vinfo_for_stmt (phi
, new_stmt_vec_info (phi
, loop_vinfo
, NULL
));
3954 new_phis
.quick_push (phi
);
3957 def
= vect_get_vec_def_for_stmt_copy (dt
, def
);
3958 STMT_VINFO_RELATED_STMT (prev_phi_info
) = phi
;
3961 SET_PHI_ARG_DEF (phi
, single_exit (loop
)->dest_idx
, def
);
3962 prev_phi_info
= vinfo_for_stmt (phi
);
3966 /* The epilogue is created for the outer-loop, i.e., for the loop being
3967 vectorized. Create exit phis for the outer loop. */
3971 exit_bb
= single_exit (loop
)->dest
;
3972 inner_phis
.create (vect_defs
.length ());
3973 FOR_EACH_VEC_ELT (new_phis
, i
, phi
)
3975 tree new_result
= copy_ssa_name (PHI_RESULT (phi
), NULL
);
3976 gimple outer_phi
= create_phi_node (new_result
, exit_bb
);
3977 SET_PHI_ARG_DEF (outer_phi
, single_exit (loop
)->dest_idx
,
3979 set_vinfo_for_stmt (outer_phi
, new_stmt_vec_info (outer_phi
,
3981 inner_phis
.quick_push (phi
);
3982 new_phis
[i
] = outer_phi
;
3983 prev_phi_info
= vinfo_for_stmt (outer_phi
);
3984 while (STMT_VINFO_RELATED_STMT (vinfo_for_stmt (phi
)))
3986 phi
= STMT_VINFO_RELATED_STMT (vinfo_for_stmt (phi
));
3987 new_result
= copy_ssa_name (PHI_RESULT (phi
), NULL
);
3988 outer_phi
= create_phi_node (new_result
, exit_bb
);
3989 SET_PHI_ARG_DEF (outer_phi
, single_exit (loop
)->dest_idx
,
3991 set_vinfo_for_stmt (outer_phi
, new_stmt_vec_info (outer_phi
,
3993 STMT_VINFO_RELATED_STMT (prev_phi_info
) = outer_phi
;
3994 prev_phi_info
= vinfo_for_stmt (outer_phi
);
3999 exit_gsi
= gsi_after_labels (exit_bb
);
4001 /* 2.2 Get the relevant tree-code to use in the epilog for schemes 2,3
4002 (i.e. when reduc_code is not available) and in the final adjustment
4003 code (if needed). Also get the original scalar reduction variable as
4004 defined in the loop. In case STMT is a "pattern-stmt" (i.e. - it
4005 represents a reduction pattern), the tree-code and scalar-def are
4006 taken from the original stmt that the pattern-stmt (STMT) replaces.
4007 Otherwise (it is a regular reduction) - the tree-code and scalar-def
4008 are taken from STMT. */
4010 orig_stmt
= STMT_VINFO_RELATED_STMT (stmt_info
);
4013 /* Regular reduction */
4018 /* Reduction pattern */
4019 stmt_vec_info stmt_vinfo
= vinfo_for_stmt (orig_stmt
);
4020 gcc_assert (STMT_VINFO_IN_PATTERN_P (stmt_vinfo
));
4021 gcc_assert (STMT_VINFO_RELATED_STMT (stmt_vinfo
) == stmt
);
4024 code
= gimple_assign_rhs_code (orig_stmt
);
4025 /* For MINUS_EXPR the initial vector is [init_val,0,...,0], therefore,
4026 partial results are added and not subtracted. */
4027 if (code
== MINUS_EXPR
)
4030 scalar_dest
= gimple_assign_lhs (orig_stmt
);
4031 scalar_type
= TREE_TYPE (scalar_dest
);
4032 scalar_results
.create (group_size
);
4033 new_scalar_dest
= vect_create_destination_var (scalar_dest
, NULL
);
4034 bitsize
= TYPE_SIZE (scalar_type
);
4036 /* In case this is a reduction in an inner-loop while vectorizing an outer
4037 loop - we don't need to extract a single scalar result at the end of the
4038 inner-loop (unless it is double reduction, i.e., the use of reduction is
4039 outside the outer-loop). The final vector of partial results will be used
4040 in the vectorized outer-loop, or reduced to a scalar result at the end of
4042 if (nested_in_vect_loop
&& !double_reduc
)
4043 goto vect_finalize_reduction
;
4045 /* SLP reduction without reduction chain, e.g.,
4049 b2 = operation (b1) */
4050 slp_reduc
= (slp_node
&& !GROUP_FIRST_ELEMENT (vinfo_for_stmt (stmt
)));
4052 /* In case of reduction chain, e.g.,
4055 a3 = operation (a2),
4057 we may end up with more than one vector result. Here we reduce them to
4059 if (GROUP_FIRST_ELEMENT (vinfo_for_stmt (stmt
)))
4061 tree first_vect
= PHI_RESULT (new_phis
[0]);
4063 gimple new_vec_stmt
= NULL
;
4065 vec_dest
= vect_create_destination_var (scalar_dest
, vectype
);
4066 for (k
= 1; k
< new_phis
.length (); k
++)
4068 gimple next_phi
= new_phis
[k
];
4069 tree second_vect
= PHI_RESULT (next_phi
);
4071 tmp
= build2 (code
, vectype
, first_vect
, second_vect
);
4072 new_vec_stmt
= gimple_build_assign (vec_dest
, tmp
);
4073 first_vect
= make_ssa_name (vec_dest
, new_vec_stmt
);
4074 gimple_assign_set_lhs (new_vec_stmt
, first_vect
);
4075 gsi_insert_before (&exit_gsi
, new_vec_stmt
, GSI_SAME_STMT
);
4078 new_phi_result
= first_vect
;
4081 new_phis
.truncate (0);
4082 new_phis
.safe_push (new_vec_stmt
);
4086 new_phi_result
= PHI_RESULT (new_phis
[0]);
4088 /* 2.3 Create the reduction code, using one of the three schemes described
4089 above. In SLP we simply need to extract all the elements from the
4090 vector (without reducing them), so we use scalar shifts. */
4091 if (reduc_code
!= ERROR_MARK
&& !slp_reduc
)
4095 /*** Case 1: Create:
4096 v_out2 = reduc_expr <v_out1> */
4098 if (dump_enabled_p ())
4099 dump_printf_loc (MSG_NOTE
, vect_location
,
4100 "Reduce using direct vector reduction.\n");
4102 vec_dest
= vect_create_destination_var (scalar_dest
, vectype
);
4103 tmp
= build1 (reduc_code
, vectype
, new_phi_result
);
4104 epilog_stmt
= gimple_build_assign (vec_dest
, tmp
);
4105 new_temp
= make_ssa_name (vec_dest
, epilog_stmt
);
4106 gimple_assign_set_lhs (epilog_stmt
, new_temp
);
4107 gsi_insert_before (&exit_gsi
, epilog_stmt
, GSI_SAME_STMT
);
4109 extract_scalar_result
= true;
4113 enum tree_code shift_code
= ERROR_MARK
;
4114 bool have_whole_vector_shift
= true;
4116 int element_bitsize
= tree_low_cst (bitsize
, 1);
4117 int vec_size_in_bits
= tree_low_cst (TYPE_SIZE (vectype
), 1);
4120 if (optab_handler (vec_shr_optab
, mode
) != CODE_FOR_nothing
)
4121 shift_code
= VEC_RSHIFT_EXPR
;
4123 have_whole_vector_shift
= false;
4125 /* Regardless of whether we have a whole vector shift, if we're
4126 emulating the operation via tree-vect-generic, we don't want
4127 to use it. Only the first round of the reduction is likely
4128 to still be profitable via emulation. */
4129 /* ??? It might be better to emit a reduction tree code here, so that
4130 tree-vect-generic can expand the first round via bit tricks. */
4131 if (!VECTOR_MODE_P (mode
))
4132 have_whole_vector_shift
= false;
4135 optab optab
= optab_for_tree_code (code
, vectype
, optab_default
);
4136 if (optab_handler (optab
, mode
) == CODE_FOR_nothing
)
4137 have_whole_vector_shift
= false;
4140 if (have_whole_vector_shift
&& !slp_reduc
)
4142 /*** Case 2: Create:
4143 for (offset = VS/2; offset >= element_size; offset/=2)
4145 Create: va' = vec_shift <va, offset>
4146 Create: va = vop <va, va'>
4149 if (dump_enabled_p ())
4150 dump_printf_loc (MSG_NOTE
, vect_location
,
4151 "Reduce using vector shifts\n");
4153 vec_dest
= vect_create_destination_var (scalar_dest
, vectype
);
4154 new_temp
= new_phi_result
;
4155 for (bit_offset
= vec_size_in_bits
/2;
4156 bit_offset
>= element_bitsize
;
4159 tree bitpos
= size_int (bit_offset
);
4161 epilog_stmt
= gimple_build_assign_with_ops (shift_code
,
4162 vec_dest
, new_temp
, bitpos
);
4163 new_name
= make_ssa_name (vec_dest
, epilog_stmt
);
4164 gimple_assign_set_lhs (epilog_stmt
, new_name
);
4165 gsi_insert_before (&exit_gsi
, epilog_stmt
, GSI_SAME_STMT
);
4167 epilog_stmt
= gimple_build_assign_with_ops (code
, vec_dest
,
4168 new_name
, new_temp
);
4169 new_temp
= make_ssa_name (vec_dest
, epilog_stmt
);
4170 gimple_assign_set_lhs (epilog_stmt
, new_temp
);
4171 gsi_insert_before (&exit_gsi
, epilog_stmt
, GSI_SAME_STMT
);
4174 extract_scalar_result
= true;
4180 /*** Case 3: Create:
4181 s = extract_field <v_out2, 0>
4182 for (offset = element_size;
4183 offset < vector_size;
4184 offset += element_size;)
4186 Create: s' = extract_field <v_out2, offset>
4187 Create: s = op <s, s'> // For non SLP cases
4190 if (dump_enabled_p ())
4191 dump_printf_loc (MSG_NOTE
, vect_location
,
4192 "Reduce using scalar code.\n");
4194 vec_size_in_bits
= tree_low_cst (TYPE_SIZE (vectype
), 1);
4195 FOR_EACH_VEC_ELT (new_phis
, i
, new_phi
)
4197 if (gimple_code (new_phi
) == GIMPLE_PHI
)
4198 vec_temp
= PHI_RESULT (new_phi
);
4200 vec_temp
= gimple_assign_lhs (new_phi
);
4201 rhs
= build3 (BIT_FIELD_REF
, scalar_type
, vec_temp
, bitsize
,
4203 epilog_stmt
= gimple_build_assign (new_scalar_dest
, rhs
);
4204 new_temp
= make_ssa_name (new_scalar_dest
, epilog_stmt
);
4205 gimple_assign_set_lhs (epilog_stmt
, new_temp
);
4206 gsi_insert_before (&exit_gsi
, epilog_stmt
, GSI_SAME_STMT
);
4208 /* In SLP we don't need to apply reduction operation, so we just
4209 collect s' values in SCALAR_RESULTS. */
4211 scalar_results
.safe_push (new_temp
);
4213 for (bit_offset
= element_bitsize
;
4214 bit_offset
< vec_size_in_bits
;
4215 bit_offset
+= element_bitsize
)
4217 tree bitpos
= bitsize_int (bit_offset
);
4218 tree rhs
= build3 (BIT_FIELD_REF
, scalar_type
, vec_temp
,
4221 epilog_stmt
= gimple_build_assign (new_scalar_dest
, rhs
);
4222 new_name
= make_ssa_name (new_scalar_dest
, epilog_stmt
);
4223 gimple_assign_set_lhs (epilog_stmt
, new_name
);
4224 gsi_insert_before (&exit_gsi
, epilog_stmt
, GSI_SAME_STMT
);
4228 /* In SLP we don't need to apply reduction operation, so
4229 we just collect s' values in SCALAR_RESULTS. */
4230 new_temp
= new_name
;
4231 scalar_results
.safe_push (new_name
);
4235 epilog_stmt
= gimple_build_assign_with_ops (code
,
4236 new_scalar_dest
, new_name
, new_temp
);
4237 new_temp
= make_ssa_name (new_scalar_dest
, epilog_stmt
);
4238 gimple_assign_set_lhs (epilog_stmt
, new_temp
);
4239 gsi_insert_before (&exit_gsi
, epilog_stmt
, GSI_SAME_STMT
);
4244 /* The only case where we need to reduce scalar results in SLP, is
4245 unrolling. If the size of SCALAR_RESULTS is greater than
4246 GROUP_SIZE, we reduce them combining elements modulo
4250 tree res
, first_res
, new_res
;
4253 /* Reduce multiple scalar results in case of SLP unrolling. */
4254 for (j
= group_size
; scalar_results
.iterate (j
, &res
);
4257 first_res
= scalar_results
[j
% group_size
];
4258 new_stmt
= gimple_build_assign_with_ops (code
,
4259 new_scalar_dest
, first_res
, res
);
4260 new_res
= make_ssa_name (new_scalar_dest
, new_stmt
);
4261 gimple_assign_set_lhs (new_stmt
, new_res
);
4262 gsi_insert_before (&exit_gsi
, new_stmt
, GSI_SAME_STMT
);
4263 scalar_results
[j
% group_size
] = new_res
;
4267 /* Not SLP - we have one scalar to keep in SCALAR_RESULTS. */
4268 scalar_results
.safe_push (new_temp
);
4270 extract_scalar_result
= false;
4274 /* 2.4 Extract the final scalar result. Create:
4275 s_out3 = extract_field <v_out2, bitpos> */
4277 if (extract_scalar_result
)
4281 if (dump_enabled_p ())
4282 dump_printf_loc (MSG_NOTE
, vect_location
,
4283 "extract scalar result\n");
4285 if (BYTES_BIG_ENDIAN
)
4286 bitpos
= size_binop (MULT_EXPR
,
4287 bitsize_int (TYPE_VECTOR_SUBPARTS (vectype
) - 1),
4288 TYPE_SIZE (scalar_type
));
4290 bitpos
= bitsize_zero_node
;
4292 rhs
= build3 (BIT_FIELD_REF
, scalar_type
, new_temp
, bitsize
, bitpos
);
4293 epilog_stmt
= gimple_build_assign (new_scalar_dest
, rhs
);
4294 new_temp
= make_ssa_name (new_scalar_dest
, epilog_stmt
);
4295 gimple_assign_set_lhs (epilog_stmt
, new_temp
);
4296 gsi_insert_before (&exit_gsi
, epilog_stmt
, GSI_SAME_STMT
);
4297 scalar_results
.safe_push (new_temp
);
4300 vect_finalize_reduction
:
4305 /* 2.5 Adjust the final result by the initial value of the reduction
4306 variable. (When such adjustment is not needed, then
4307 'adjustment_def' is zero). For example, if code is PLUS we create:
4308 new_temp = loop_exit_def + adjustment_def */
4312 gcc_assert (!slp_reduc
);
4313 if (nested_in_vect_loop
)
4315 new_phi
= new_phis
[0];
4316 gcc_assert (TREE_CODE (TREE_TYPE (adjustment_def
)) == VECTOR_TYPE
);
4317 expr
= build2 (code
, vectype
, PHI_RESULT (new_phi
), adjustment_def
);
4318 new_dest
= vect_create_destination_var (scalar_dest
, vectype
);
4322 new_temp
= scalar_results
[0];
4323 gcc_assert (TREE_CODE (TREE_TYPE (adjustment_def
)) != VECTOR_TYPE
);
4324 expr
= build2 (code
, scalar_type
, new_temp
, adjustment_def
);
4325 new_dest
= vect_create_destination_var (scalar_dest
, scalar_type
);
4328 epilog_stmt
= gimple_build_assign (new_dest
, expr
);
4329 new_temp
= make_ssa_name (new_dest
, epilog_stmt
);
4330 gimple_assign_set_lhs (epilog_stmt
, new_temp
);
4331 gsi_insert_before (&exit_gsi
, epilog_stmt
, GSI_SAME_STMT
);
4332 if (nested_in_vect_loop
)
4334 set_vinfo_for_stmt (epilog_stmt
,
4335 new_stmt_vec_info (epilog_stmt
, loop_vinfo
,
4337 STMT_VINFO_RELATED_STMT (vinfo_for_stmt (epilog_stmt
)) =
4338 STMT_VINFO_RELATED_STMT (vinfo_for_stmt (new_phi
));
4341 scalar_results
.quick_push (new_temp
);
4343 scalar_results
[0] = new_temp
;
4346 scalar_results
[0] = new_temp
;
4348 new_phis
[0] = epilog_stmt
;
4351 /* 2.6 Handle the loop-exit phis. Replace the uses of scalar loop-exit
4352 phis with new adjusted scalar results, i.e., replace use <s_out0>
4357 s_out0 = phi <s_loop> # (scalar) EXIT_PHI
4358 v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI
4359 v_out2 = reduce <v_out1>
4360 s_out3 = extract_field <v_out2, 0>
4361 s_out4 = adjust_result <s_out3>
4368 s_out0 = phi <s_loop> # (scalar) EXIT_PHI
4369 v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI
4370 v_out2 = reduce <v_out1>
4371 s_out3 = extract_field <v_out2, 0>
4372 s_out4 = adjust_result <s_out3>
4377 /* In SLP reduction chain we reduce vector results into one vector if
4378 necessary, hence we set here GROUP_SIZE to 1. SCALAR_DEST is the LHS of
4379 the last stmt in the reduction chain, since we are looking for the loop
4381 if (GROUP_FIRST_ELEMENT (vinfo_for_stmt (stmt
)))
4383 scalar_dest
= gimple_assign_lhs (
4384 SLP_TREE_SCALAR_STMTS (slp_node
)[group_size
- 1]);
4388 /* In SLP we may have several statements in NEW_PHIS and REDUCTION_PHIS (in
4389 case that GROUP_SIZE is greater than vectorization factor). Therefore, we
4390 need to match SCALAR_RESULTS with corresponding statements. The first
4391 (GROUP_SIZE / number of new vector stmts) scalar results correspond to
4392 the first vector stmt, etc.
4393 (RATIO is equal to (GROUP_SIZE / number of new vector stmts)). */
4394 if (group_size
> new_phis
.length ())
4396 ratio
= group_size
/ new_phis
.length ();
4397 gcc_assert (!(group_size
% new_phis
.length ()));
4402 for (k
= 0; k
< group_size
; k
++)
4406 epilog_stmt
= new_phis
[k
/ ratio
];
4407 reduction_phi
= reduction_phis
[k
/ ratio
];
4409 inner_phi
= inner_phis
[k
/ ratio
];
4414 gimple current_stmt
= SLP_TREE_SCALAR_STMTS (slp_node
)[k
];
4416 orig_stmt
= STMT_VINFO_RELATED_STMT (vinfo_for_stmt (current_stmt
));
4417 /* SLP statements can't participate in patterns. */
4418 gcc_assert (!orig_stmt
);
4419 scalar_dest
= gimple_assign_lhs (current_stmt
);
4423 /* Find the loop-closed-use at the loop exit of the original scalar
4424 result. (The reduction result is expected to have two immediate uses -
4425 one at the latch block, and one at the loop exit). */
4426 FOR_EACH_IMM_USE_FAST (use_p
, imm_iter
, scalar_dest
)
4427 if (!flow_bb_inside_loop_p (loop
, gimple_bb (USE_STMT (use_p
)))
4428 && !is_gimple_debug (USE_STMT (use_p
)))
4429 phis
.safe_push (USE_STMT (use_p
));
4431 /* While we expect to have found an exit_phi because of loop-closed-ssa
4432 form we can end up without one if the scalar cycle is dead. */
4434 FOR_EACH_VEC_ELT (phis
, i
, exit_phi
)
4438 stmt_vec_info exit_phi_vinfo
= vinfo_for_stmt (exit_phi
);
4441 /* FORNOW. Currently not supporting the case that an inner-loop
4442 reduction is not used in the outer-loop (but only outside the
4443 outer-loop), unless it is double reduction. */
4444 gcc_assert ((STMT_VINFO_RELEVANT_P (exit_phi_vinfo
)
4445 && !STMT_VINFO_LIVE_P (exit_phi_vinfo
))
4448 STMT_VINFO_VEC_STMT (exit_phi_vinfo
) = epilog_stmt
;
4450 || STMT_VINFO_DEF_TYPE (exit_phi_vinfo
)
4451 != vect_double_reduction_def
)
4454 /* Handle double reduction:
4456 stmt1: s1 = phi <s0, s2> - double reduction phi (outer loop)
4457 stmt2: s3 = phi <s1, s4> - (regular) reduc phi (inner loop)
4458 stmt3: s4 = use (s3) - (regular) reduc stmt (inner loop)
4459 stmt4: s2 = phi <s4> - double reduction stmt (outer loop)
4461 At that point the regular reduction (stmt2 and stmt3) is
4462 already vectorized, as well as the exit phi node, stmt4.
4463 Here we vectorize the phi node of double reduction, stmt1, and
4464 update all relevant statements. */
4466 /* Go through all the uses of s2 to find double reduction phi
4467 node, i.e., stmt1 above. */
4468 orig_name
= PHI_RESULT (exit_phi
);
4469 FOR_EACH_IMM_USE_STMT (use_stmt
, imm_iter
, orig_name
)
4471 stmt_vec_info use_stmt_vinfo
;
4472 stmt_vec_info new_phi_vinfo
;
4473 tree vect_phi_init
, preheader_arg
, vect_phi_res
, init_def
;
4474 basic_block bb
= gimple_bb (use_stmt
);
4477 /* Check that USE_STMT is really double reduction phi
4479 if (gimple_code (use_stmt
) != GIMPLE_PHI
4480 || gimple_phi_num_args (use_stmt
) != 2
4481 || bb
->loop_father
!= outer_loop
)
4483 use_stmt_vinfo
= vinfo_for_stmt (use_stmt
);
4485 || STMT_VINFO_DEF_TYPE (use_stmt_vinfo
)
4486 != vect_double_reduction_def
)
4489 /* Create vector phi node for double reduction:
4490 vs1 = phi <vs0, vs2>
4491 vs1 was created previously in this function by a call to
4492 vect_get_vec_def_for_operand and is stored in
4494 vs2 is defined by INNER_PHI, the vectorized EXIT_PHI;
4495 vs0 is created here. */
4497 /* Create vector phi node. */
4498 vect_phi
= create_phi_node (vec_initial_def
, bb
);
4499 new_phi_vinfo
= new_stmt_vec_info (vect_phi
,
4500 loop_vec_info_for_loop (outer_loop
), NULL
);
4501 set_vinfo_for_stmt (vect_phi
, new_phi_vinfo
);
4503 /* Create vs0 - initial def of the double reduction phi. */
4504 preheader_arg
= PHI_ARG_DEF_FROM_EDGE (use_stmt
,
4505 loop_preheader_edge (outer_loop
));
4506 init_def
= get_initial_def_for_reduction (stmt
,
4507 preheader_arg
, NULL
);
4508 vect_phi_init
= vect_init_vector (use_stmt
, init_def
,
4511 /* Update phi node arguments with vs0 and vs2. */
4512 add_phi_arg (vect_phi
, vect_phi_init
,
4513 loop_preheader_edge (outer_loop
),
4515 add_phi_arg (vect_phi
, PHI_RESULT (inner_phi
),
4516 loop_latch_edge (outer_loop
), UNKNOWN_LOCATION
);
4517 if (dump_enabled_p ())
4519 dump_printf_loc (MSG_NOTE
, vect_location
,
4520 "created double reduction phi node: ");
4521 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, vect_phi
, 0);
4522 dump_printf (MSG_NOTE
, "\n");
4525 vect_phi_res
= PHI_RESULT (vect_phi
);
4527 /* Replace the use, i.e., set the correct vs1 in the regular
4528 reduction phi node. FORNOW, NCOPIES is always 1, so the
4529 loop is redundant. */
4530 use
= reduction_phi
;
4531 for (j
= 0; j
< ncopies
; j
++)
4533 edge pr_edge
= loop_preheader_edge (loop
);
4534 SET_PHI_ARG_DEF (use
, pr_edge
->dest_idx
, vect_phi_res
);
4535 use
= STMT_VINFO_RELATED_STMT (vinfo_for_stmt (use
));
4542 if (nested_in_vect_loop
)
4551 /* Find the loop-closed-use at the loop exit of the original scalar
4552 result. (The reduction result is expected to have two immediate uses,
4553 one at the latch block, and one at the loop exit). For double
4554 reductions we are looking for exit phis of the outer loop. */
4555 FOR_EACH_IMM_USE_FAST (use_p
, imm_iter
, scalar_dest
)
4557 if (!flow_bb_inside_loop_p (loop
, gimple_bb (USE_STMT (use_p
))))
4559 if (!is_gimple_debug (USE_STMT (use_p
)))
4560 phis
.safe_push (USE_STMT (use_p
));
4564 if (double_reduc
&& gimple_code (USE_STMT (use_p
)) == GIMPLE_PHI
)
4566 tree phi_res
= PHI_RESULT (USE_STMT (use_p
));
4568 FOR_EACH_IMM_USE_FAST (phi_use_p
, phi_imm_iter
, phi_res
)
4570 if (!flow_bb_inside_loop_p (loop
,
4571 gimple_bb (USE_STMT (phi_use_p
)))
4572 && !is_gimple_debug (USE_STMT (phi_use_p
)))
4573 phis
.safe_push (USE_STMT (phi_use_p
));
4579 FOR_EACH_VEC_ELT (phis
, i
, exit_phi
)
4581 /* Replace the uses: */
4582 orig_name
= PHI_RESULT (exit_phi
);
4583 scalar_result
= scalar_results
[k
];
4584 FOR_EACH_IMM_USE_STMT (use_stmt
, imm_iter
, orig_name
)
4585 FOR_EACH_IMM_USE_ON_STMT (use_p
, imm_iter
)
4586 SET_USE (use_p
, scalar_result
);
4592 scalar_results
.release ();
4593 inner_phis
.release ();
4594 new_phis
.release ();
4598 /* Function vectorizable_reduction.
4600 Check if STMT performs a reduction operation that can be vectorized.
4601 If VEC_STMT is also passed, vectorize the STMT: create a vectorized
4602 stmt to replace it, put it in VEC_STMT, and insert it at GSI.
4603 Return FALSE if not a vectorizable STMT, TRUE otherwise.
4605 This function also handles reduction idioms (patterns) that have been
4606 recognized in advance during vect_pattern_recog. In this case, STMT may be
4608 X = pattern_expr (arg0, arg1, ..., X)
4609 and it's STMT_VINFO_RELATED_STMT points to the last stmt in the original
4610 sequence that had been detected and replaced by the pattern-stmt (STMT).
4612 In some cases of reduction patterns, the type of the reduction variable X is
4613 different than the type of the other arguments of STMT.
4614 In such cases, the vectype that is used when transforming STMT into a vector
4615 stmt is different than the vectype that is used to determine the
4616 vectorization factor, because it consists of a different number of elements
4617 than the actual number of elements that are being operated upon in parallel.
4619 For example, consider an accumulation of shorts into an int accumulator.
4620 On some targets it's possible to vectorize this pattern operating on 8
4621 shorts at a time (hence, the vectype for purposes of determining the
4622 vectorization factor should be V8HI); on the other hand, the vectype that
4623 is used to create the vector form is actually V4SI (the type of the result).
4625 Upon entry to this function, STMT_VINFO_VECTYPE records the vectype that
4626 indicates what is the actual level of parallelism (V8HI in the example), so
4627 that the right vectorization factor would be derived. This vectype
4628 corresponds to the type of arguments to the reduction stmt, and should *NOT*
4629 be used to create the vectorized stmt. The right vectype for the vectorized
4630 stmt is obtained from the type of the result X:
4631 get_vectype_for_scalar_type (TREE_TYPE (X))
4633 This means that, contrary to "regular" reductions (or "regular" stmts in
4634 general), the following equation:
4635 STMT_VINFO_VECTYPE == get_vectype_for_scalar_type (TREE_TYPE (X))
4636 does *NOT* necessarily hold for reduction patterns. */
4639 vectorizable_reduction (gimple stmt
, gimple_stmt_iterator
*gsi
,
4640 gimple
*vec_stmt
, slp_tree slp_node
)
4644 tree loop_vec_def0
= NULL_TREE
, loop_vec_def1
= NULL_TREE
;
4645 stmt_vec_info stmt_info
= vinfo_for_stmt (stmt
);
4646 tree vectype_out
= STMT_VINFO_VECTYPE (stmt_info
);
4647 tree vectype_in
= NULL_TREE
;
4648 loop_vec_info loop_vinfo
= STMT_VINFO_LOOP_VINFO (stmt_info
);
4649 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
);
4650 enum tree_code code
, orig_code
, epilog_reduc_code
;
4651 enum machine_mode vec_mode
;
4653 optab optab
, reduc_optab
;
4654 tree new_temp
= NULL_TREE
;
4657 enum vect_def_type dt
;
4658 gimple new_phi
= NULL
;
4662 stmt_vec_info orig_stmt_info
;
4663 tree expr
= NULL_TREE
;
4667 stmt_vec_info prev_stmt_info
, prev_phi_info
;
4668 bool single_defuse_cycle
= false;
4669 tree reduc_def
= NULL_TREE
;
4670 gimple new_stmt
= NULL
;
4673 bool nested_cycle
= false, found_nested_cycle_def
= false;
4674 gimple reduc_def_stmt
= NULL
;
4675 /* The default is that the reduction variable is the last in statement. */
4676 int reduc_index
= 2;
4677 bool double_reduc
= false, dummy
;
4679 struct loop
* def_stmt_loop
, *outer_loop
= NULL
;
4681 gimple def_arg_stmt
;
4682 vec
<tree
> vec_oprnds0
= vNULL
;
4683 vec
<tree
> vec_oprnds1
= vNULL
;
4684 vec
<tree
> vect_defs
= vNULL
;
4685 vec
<gimple
> phis
= vNULL
;
4687 tree def0
, def1
, tem
, op0
, op1
= NULL_TREE
;
4689 /* In case of reduction chain we switch to the first stmt in the chain, but
4690 we don't update STMT_INFO, since only the last stmt is marked as reduction
4691 and has reduction properties. */
4692 if (GROUP_FIRST_ELEMENT (vinfo_for_stmt (stmt
)))
4693 stmt
= GROUP_FIRST_ELEMENT (stmt_info
);
4695 if (nested_in_vect_loop_p (loop
, stmt
))
4699 nested_cycle
= true;
4702 /* 1. Is vectorizable reduction? */
4703 /* Not supportable if the reduction variable is used in the loop, unless
4704 it's a reduction chain. */
4705 if (STMT_VINFO_RELEVANT (stmt_info
) > vect_used_in_outer
4706 && !GROUP_FIRST_ELEMENT (stmt_info
))
4709 /* Reductions that are not used even in an enclosing outer-loop,
4710 are expected to be "live" (used out of the loop). */
4711 if (STMT_VINFO_RELEVANT (stmt_info
) == vect_unused_in_scope
4712 && !STMT_VINFO_LIVE_P (stmt_info
))
4715 /* Make sure it was already recognized as a reduction computation. */
4716 if (STMT_VINFO_DEF_TYPE (stmt_info
) != vect_reduction_def
4717 && STMT_VINFO_DEF_TYPE (stmt_info
) != vect_nested_cycle
)
4720 /* 2. Has this been recognized as a reduction pattern?
4722 Check if STMT represents a pattern that has been recognized
4723 in earlier analysis stages. For stmts that represent a pattern,
4724 the STMT_VINFO_RELATED_STMT field records the last stmt in
4725 the original sequence that constitutes the pattern. */
4727 orig_stmt
= STMT_VINFO_RELATED_STMT (stmt_info
);
4730 orig_stmt_info
= vinfo_for_stmt (orig_stmt
);
4731 gcc_assert (STMT_VINFO_IN_PATTERN_P (orig_stmt_info
));
4732 gcc_assert (!STMT_VINFO_IN_PATTERN_P (stmt_info
));
4735 /* 3. Check the operands of the operation. The first operands are defined
4736 inside the loop body. The last operand is the reduction variable,
4737 which is defined by the loop-header-phi. */
4739 gcc_assert (is_gimple_assign (stmt
));
4742 switch (get_gimple_rhs_class (gimple_assign_rhs_code (stmt
)))
4744 case GIMPLE_SINGLE_RHS
:
4745 op_type
= TREE_OPERAND_LENGTH (gimple_assign_rhs1 (stmt
));
4746 if (op_type
== ternary_op
)
4748 tree rhs
= gimple_assign_rhs1 (stmt
);
4749 ops
[0] = TREE_OPERAND (rhs
, 0);
4750 ops
[1] = TREE_OPERAND (rhs
, 1);
4751 ops
[2] = TREE_OPERAND (rhs
, 2);
4752 code
= TREE_CODE (rhs
);
4758 case GIMPLE_BINARY_RHS
:
4759 code
= gimple_assign_rhs_code (stmt
);
4760 op_type
= TREE_CODE_LENGTH (code
);
4761 gcc_assert (op_type
== binary_op
);
4762 ops
[0] = gimple_assign_rhs1 (stmt
);
4763 ops
[1] = gimple_assign_rhs2 (stmt
);
4766 case GIMPLE_TERNARY_RHS
:
4767 code
= gimple_assign_rhs_code (stmt
);
4768 op_type
= TREE_CODE_LENGTH (code
);
4769 gcc_assert (op_type
== ternary_op
);
4770 ops
[0] = gimple_assign_rhs1 (stmt
);
4771 ops
[1] = gimple_assign_rhs2 (stmt
);
4772 ops
[2] = gimple_assign_rhs3 (stmt
);
4775 case GIMPLE_UNARY_RHS
:
4782 if (code
== COND_EXPR
&& slp_node
)
4785 scalar_dest
= gimple_assign_lhs (stmt
);
4786 scalar_type
= TREE_TYPE (scalar_dest
);
4787 if (!POINTER_TYPE_P (scalar_type
) && !INTEGRAL_TYPE_P (scalar_type
)
4788 && !SCALAR_FLOAT_TYPE_P (scalar_type
))
4791 /* Do not try to vectorize bit-precision reductions. */
4792 if ((TYPE_PRECISION (scalar_type
)
4793 != GET_MODE_PRECISION (TYPE_MODE (scalar_type
))))
4796 /* All uses but the last are expected to be defined in the loop.
4797 The last use is the reduction variable. In case of nested cycle this
4798 assumption is not true: we use reduc_index to record the index of the
4799 reduction variable. */
4800 for (i
= 0; i
< op_type
- 1; i
++)
4802 /* The condition of COND_EXPR is checked in vectorizable_condition(). */
4803 if (i
== 0 && code
== COND_EXPR
)
4806 is_simple_use
= vect_is_simple_use_1 (ops
[i
], stmt
, loop_vinfo
, NULL
,
4807 &def_stmt
, &def
, &dt
, &tem
);
4810 gcc_assert (is_simple_use
);
4812 if (dt
!= vect_internal_def
4813 && dt
!= vect_external_def
4814 && dt
!= vect_constant_def
4815 && dt
!= vect_induction_def
4816 && !(dt
== vect_nested_cycle
&& nested_cycle
))
4819 if (dt
== vect_nested_cycle
)
4821 found_nested_cycle_def
= true;
4822 reduc_def_stmt
= def_stmt
;
4827 is_simple_use
= vect_is_simple_use_1 (ops
[i
], stmt
, loop_vinfo
, NULL
,
4828 &def_stmt
, &def
, &dt
, &tem
);
4831 gcc_assert (is_simple_use
);
4832 if (!(dt
== vect_reduction_def
4833 || dt
== vect_nested_cycle
4834 || ((dt
== vect_internal_def
|| dt
== vect_external_def
4835 || dt
== vect_constant_def
|| dt
== vect_induction_def
)
4836 && nested_cycle
&& found_nested_cycle_def
)))
4838 /* For pattern recognized stmts, orig_stmt might be a reduction,
4839 but some helper statements for the pattern might not, or
4840 might be COND_EXPRs with reduction uses in the condition. */
4841 gcc_assert (orig_stmt
);
4844 if (!found_nested_cycle_def
)
4845 reduc_def_stmt
= def_stmt
;
4847 gcc_assert (gimple_code (reduc_def_stmt
) == GIMPLE_PHI
);
4849 gcc_assert (orig_stmt
== vect_is_simple_reduction (loop_vinfo
,
4855 gimple tmp
= vect_is_simple_reduction (loop_vinfo
, reduc_def_stmt
,
4856 !nested_cycle
, &dummy
);
4857 /* We changed STMT to be the first stmt in reduction chain, hence we
4858 check that in this case the first element in the chain is STMT. */
4859 gcc_assert (stmt
== tmp
4860 || GROUP_FIRST_ELEMENT (vinfo_for_stmt (tmp
)) == stmt
);
4863 if (STMT_VINFO_LIVE_P (vinfo_for_stmt (reduc_def_stmt
)))
4866 if (slp_node
|| PURE_SLP_STMT (stmt_info
))
4869 ncopies
= (LOOP_VINFO_VECT_FACTOR (loop_vinfo
)
4870 / TYPE_VECTOR_SUBPARTS (vectype_in
));
4872 gcc_assert (ncopies
>= 1);
4874 vec_mode
= TYPE_MODE (vectype_in
);
4876 if (code
== COND_EXPR
)
4878 if (!vectorizable_condition (stmt
, gsi
, NULL
, ops
[reduc_index
], 0, NULL
))
4880 if (dump_enabled_p ())
4881 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
4882 "unsupported condition in reduction\n");
4889 /* 4. Supportable by target? */
4891 if (code
== LSHIFT_EXPR
|| code
== RSHIFT_EXPR
4892 || code
== LROTATE_EXPR
|| code
== RROTATE_EXPR
)
4894 /* Shifts and rotates are only supported by vectorizable_shifts,
4895 not vectorizable_reduction. */
4896 if (dump_enabled_p ())
4897 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
4898 "unsupported shift or rotation.\n");
4902 /* 4.1. check support for the operation in the loop */
4903 optab
= optab_for_tree_code (code
, vectype_in
, optab_default
);
4906 if (dump_enabled_p ())
4907 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
4913 if (optab_handler (optab
, vec_mode
) == CODE_FOR_nothing
)
4915 if (dump_enabled_p ())
4916 dump_printf (MSG_NOTE
, "op not supported by target.\n");
4918 if (GET_MODE_SIZE (vec_mode
) != UNITS_PER_WORD
4919 || LOOP_VINFO_VECT_FACTOR (loop_vinfo
)
4920 < vect_min_worthwhile_factor (code
))
4923 if (dump_enabled_p ())
4924 dump_printf (MSG_NOTE
, "proceeding using word mode.\n");
4927 /* Worthwhile without SIMD support? */
4928 if (!VECTOR_MODE_P (TYPE_MODE (vectype_in
))
4929 && LOOP_VINFO_VECT_FACTOR (loop_vinfo
)
4930 < vect_min_worthwhile_factor (code
))
4932 if (dump_enabled_p ())
4933 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
4934 "not worthwhile without SIMD support.\n");
4940 /* 4.2. Check support for the epilog operation.
4942 If STMT represents a reduction pattern, then the type of the
4943 reduction variable may be different than the type of the rest
4944 of the arguments. For example, consider the case of accumulation
4945 of shorts into an int accumulator; The original code:
4946 S1: int_a = (int) short_a;
4947 orig_stmt-> S2: int_acc = plus <int_a ,int_acc>;
4950 STMT: int_acc = widen_sum <short_a, int_acc>
4953 1. The tree-code that is used to create the vector operation in the
4954 epilog code (that reduces the partial results) is not the
4955 tree-code of STMT, but is rather the tree-code of the original
4956 stmt from the pattern that STMT is replacing. I.e, in the example
4957 above we want to use 'widen_sum' in the loop, but 'plus' in the
4959 2. The type (mode) we use to check available target support
4960 for the vector operation to be created in the *epilog*, is
4961 determined by the type of the reduction variable (in the example
4962 above we'd check this: optab_handler (plus_optab, vect_int_mode])).
4963 However the type (mode) we use to check available target support
4964 for the vector operation to be created *inside the loop*, is
4965 determined by the type of the other arguments to STMT (in the
4966 example we'd check this: optab_handler (widen_sum_optab,
4969 This is contrary to "regular" reductions, in which the types of all
4970 the arguments are the same as the type of the reduction variable.
4971 For "regular" reductions we can therefore use the same vector type
4972 (and also the same tree-code) when generating the epilog code and
4973 when generating the code inside the loop. */
4977 /* This is a reduction pattern: get the vectype from the type of the
4978 reduction variable, and get the tree-code from orig_stmt. */
4979 orig_code
= gimple_assign_rhs_code (orig_stmt
);
4980 gcc_assert (vectype_out
);
4981 vec_mode
= TYPE_MODE (vectype_out
);
4985 /* Regular reduction: use the same vectype and tree-code as used for
4986 the vector code inside the loop can be used for the epilog code. */
4992 def_bb
= gimple_bb (reduc_def_stmt
);
4993 def_stmt_loop
= def_bb
->loop_father
;
4994 def_arg
= PHI_ARG_DEF_FROM_EDGE (reduc_def_stmt
,
4995 loop_preheader_edge (def_stmt_loop
));
4996 if (TREE_CODE (def_arg
) == SSA_NAME
4997 && (def_arg_stmt
= SSA_NAME_DEF_STMT (def_arg
))
4998 && gimple_code (def_arg_stmt
) == GIMPLE_PHI
4999 && flow_bb_inside_loop_p (outer_loop
, gimple_bb (def_arg_stmt
))
5000 && vinfo_for_stmt (def_arg_stmt
)
5001 && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_arg_stmt
))
5002 == vect_double_reduction_def
)
5003 double_reduc
= true;
5006 epilog_reduc_code
= ERROR_MARK
;
5007 if (reduction_code_for_scalar_code (orig_code
, &epilog_reduc_code
))
5009 reduc_optab
= optab_for_tree_code (epilog_reduc_code
, vectype_out
,
5013 if (dump_enabled_p ())
5014 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
5015 "no optab for reduction.\n");
5017 epilog_reduc_code
= ERROR_MARK
;
5021 && optab_handler (reduc_optab
, vec_mode
) == CODE_FOR_nothing
)
5023 if (dump_enabled_p ())
5024 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
5025 "reduc op not supported by target.\n");
5027 epilog_reduc_code
= ERROR_MARK
;
5032 if (!nested_cycle
|| double_reduc
)
5034 if (dump_enabled_p ())
5035 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
5036 "no reduc code for scalar code.\n");
5042 if (double_reduc
&& ncopies
> 1)
5044 if (dump_enabled_p ())
5045 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
5046 "multiple types in double reduction\n");
5051 /* In case of widenning multiplication by a constant, we update the type
5052 of the constant to be the type of the other operand. We check that the
5053 constant fits the type in the pattern recognition pass. */
5054 if (code
== DOT_PROD_EXPR
5055 && !types_compatible_p (TREE_TYPE (ops
[0]), TREE_TYPE (ops
[1])))
5057 if (TREE_CODE (ops
[0]) == INTEGER_CST
)
5058 ops
[0] = fold_convert (TREE_TYPE (ops
[1]), ops
[0]);
5059 else if (TREE_CODE (ops
[1]) == INTEGER_CST
)
5060 ops
[1] = fold_convert (TREE_TYPE (ops
[0]), ops
[1]);
5063 if (dump_enabled_p ())
5064 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
5065 "invalid types in dot-prod\n");
5071 if (!vec_stmt
) /* transformation not required. */
5073 if (!vect_model_reduction_cost (stmt_info
, epilog_reduc_code
, ncopies
))
5075 STMT_VINFO_TYPE (stmt_info
) = reduc_vec_info_type
;
5081 if (dump_enabled_p ())
5082 dump_printf_loc (MSG_NOTE
, vect_location
, "transform reduction.\n");
5084 /* FORNOW: Multiple types are not supported for condition. */
5085 if (code
== COND_EXPR
)
5086 gcc_assert (ncopies
== 1);
5088 /* Create the destination vector */
5089 vec_dest
= vect_create_destination_var (scalar_dest
, vectype_out
);
5091 /* In case the vectorization factor (VF) is bigger than the number
5092 of elements that we can fit in a vectype (nunits), we have to generate
5093 more than one vector stmt - i.e - we need to "unroll" the
5094 vector stmt by a factor VF/nunits. For more details see documentation
5095 in vectorizable_operation. */
5097 /* If the reduction is used in an outer loop we need to generate
5098 VF intermediate results, like so (e.g. for ncopies=2):
5103 (i.e. we generate VF results in 2 registers).
5104 In this case we have a separate def-use cycle for each copy, and therefore
5105 for each copy we get the vector def for the reduction variable from the
5106 respective phi node created for this copy.
5108 Otherwise (the reduction is unused in the loop nest), we can combine
5109 together intermediate results, like so (e.g. for ncopies=2):
5113 (i.e. we generate VF/2 results in a single register).
5114 In this case for each copy we get the vector def for the reduction variable
5115 from the vectorized reduction operation generated in the previous iteration.
5118 if (STMT_VINFO_RELEVANT (stmt_info
) == vect_unused_in_scope
)
5120 single_defuse_cycle
= true;
5124 epilog_copies
= ncopies
;
5126 prev_stmt_info
= NULL
;
5127 prev_phi_info
= NULL
;
5130 vec_num
= SLP_TREE_NUMBER_OF_VEC_STMTS (slp_node
);
5131 gcc_assert (TYPE_VECTOR_SUBPARTS (vectype_out
)
5132 == TYPE_VECTOR_SUBPARTS (vectype_in
));
5137 vec_oprnds0
.create (1);
5138 if (op_type
== ternary_op
)
5139 vec_oprnds1
.create (1);
5142 phis
.create (vec_num
);
5143 vect_defs
.create (vec_num
);
5145 vect_defs
.quick_push (NULL_TREE
);
5147 for (j
= 0; j
< ncopies
; j
++)
5149 if (j
== 0 || !single_defuse_cycle
)
5151 for (i
= 0; i
< vec_num
; i
++)
5153 /* Create the reduction-phi that defines the reduction
5155 new_phi
= create_phi_node (vec_dest
, loop
->header
);
5156 set_vinfo_for_stmt (new_phi
,
5157 new_stmt_vec_info (new_phi
, loop_vinfo
,
5159 if (j
== 0 || slp_node
)
5160 phis
.quick_push (new_phi
);
5164 if (code
== COND_EXPR
)
5166 gcc_assert (!slp_node
);
5167 vectorizable_condition (stmt
, gsi
, vec_stmt
,
5168 PHI_RESULT (phis
[0]),
5170 /* Multiple types are not supported for condition. */
5177 op0
= ops
[!reduc_index
];
5178 if (op_type
== ternary_op
)
5180 if (reduc_index
== 0)
5187 vect_get_vec_defs (op0
, op1
, stmt
, &vec_oprnds0
, &vec_oprnds1
,
5191 loop_vec_def0
= vect_get_vec_def_for_operand (ops
[!reduc_index
],
5193 vec_oprnds0
.quick_push (loop_vec_def0
);
5194 if (op_type
== ternary_op
)
5196 loop_vec_def1
= vect_get_vec_def_for_operand (op1
, stmt
,
5198 vec_oprnds1
.quick_push (loop_vec_def1
);
5206 enum vect_def_type dt
;
5210 vect_is_simple_use (ops
[!reduc_index
], stmt
, loop_vinfo
, NULL
,
5211 &dummy_stmt
, &dummy
, &dt
);
5212 loop_vec_def0
= vect_get_vec_def_for_stmt_copy (dt
,
5214 vec_oprnds0
[0] = loop_vec_def0
;
5215 if (op_type
== ternary_op
)
5217 vect_is_simple_use (op1
, stmt
, loop_vinfo
, NULL
, &dummy_stmt
,
5219 loop_vec_def1
= vect_get_vec_def_for_stmt_copy (dt
,
5221 vec_oprnds1
[0] = loop_vec_def1
;
5225 if (single_defuse_cycle
)
5226 reduc_def
= gimple_assign_lhs (new_stmt
);
5228 STMT_VINFO_RELATED_STMT (prev_phi_info
) = new_phi
;
5231 FOR_EACH_VEC_ELT (vec_oprnds0
, i
, def0
)
5234 reduc_def
= PHI_RESULT (phis
[i
]);
5237 if (!single_defuse_cycle
|| j
== 0)
5238 reduc_def
= PHI_RESULT (new_phi
);
5241 def1
= ((op_type
== ternary_op
)
5242 ? vec_oprnds1
[i
] : NULL
);
5243 if (op_type
== binary_op
)
5245 if (reduc_index
== 0)
5246 expr
= build2 (code
, vectype_out
, reduc_def
, def0
);
5248 expr
= build2 (code
, vectype_out
, def0
, reduc_def
);
5252 if (reduc_index
== 0)
5253 expr
= build3 (code
, vectype_out
, reduc_def
, def0
, def1
);
5256 if (reduc_index
== 1)
5257 expr
= build3 (code
, vectype_out
, def0
, reduc_def
, def1
);
5259 expr
= build3 (code
, vectype_out
, def0
, def1
, reduc_def
);
5263 new_stmt
= gimple_build_assign (vec_dest
, expr
);
5264 new_temp
= make_ssa_name (vec_dest
, new_stmt
);
5265 gimple_assign_set_lhs (new_stmt
, new_temp
);
5266 vect_finish_stmt_generation (stmt
, new_stmt
, gsi
);
5270 SLP_TREE_VEC_STMTS (slp_node
).quick_push (new_stmt
);
5271 vect_defs
.quick_push (new_temp
);
5274 vect_defs
[0] = new_temp
;
5281 STMT_VINFO_VEC_STMT (stmt_info
) = *vec_stmt
= new_stmt
;
5283 STMT_VINFO_RELATED_STMT (prev_stmt_info
) = new_stmt
;
5285 prev_stmt_info
= vinfo_for_stmt (new_stmt
);
5286 prev_phi_info
= vinfo_for_stmt (new_phi
);
5289 /* Finalize the reduction-phi (set its arguments) and create the
5290 epilog reduction code. */
5291 if ((!single_defuse_cycle
|| code
== COND_EXPR
) && !slp_node
)
5293 new_temp
= gimple_assign_lhs (*vec_stmt
);
5294 vect_defs
[0] = new_temp
;
5297 vect_create_epilog_for_reduction (vect_defs
, stmt
, epilog_copies
,
5298 epilog_reduc_code
, phis
, reduc_index
,
5299 double_reduc
, slp_node
);
5302 vect_defs
.release ();
5303 vec_oprnds0
.release ();
5304 vec_oprnds1
.release ();
5309 /* Function vect_min_worthwhile_factor.
5311 For a loop where we could vectorize the operation indicated by CODE,
5312 return the minimum vectorization factor that makes it worthwhile
5313 to use generic vectors. */
5315 vect_min_worthwhile_factor (enum tree_code code
)
5336 /* Function vectorizable_induction
5338 Check if PHI performs an induction computation that can be vectorized.
5339 If VEC_STMT is also passed, vectorize the induction PHI: create a vectorized
5340 phi to replace it, put it in VEC_STMT, and add it to the same basic block.
5341 Return FALSE if not a vectorizable STMT, TRUE otherwise. */
5344 vectorizable_induction (gimple phi
, gimple_stmt_iterator
*gsi ATTRIBUTE_UNUSED
,
5347 stmt_vec_info stmt_info
= vinfo_for_stmt (phi
);
5348 tree vectype
= STMT_VINFO_VECTYPE (stmt_info
);
5349 loop_vec_info loop_vinfo
= STMT_VINFO_LOOP_VINFO (stmt_info
);
5350 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
);
5351 int nunits
= TYPE_VECTOR_SUBPARTS (vectype
);
5352 int ncopies
= LOOP_VINFO_VECT_FACTOR (loop_vinfo
) / nunits
;
5355 gcc_assert (ncopies
>= 1);
5356 /* FORNOW. These restrictions should be relaxed. */
5357 if (nested_in_vect_loop_p (loop
, phi
))
5359 imm_use_iterator imm_iter
;
5360 use_operand_p use_p
;
5367 if (dump_enabled_p ())
5368 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
5369 "multiple types in nested loop.\n");
5374 latch_e
= loop_latch_edge (loop
->inner
);
5375 loop_arg
= PHI_ARG_DEF_FROM_EDGE (phi
, latch_e
);
5376 FOR_EACH_IMM_USE_FAST (use_p
, imm_iter
, loop_arg
)
5378 if (!flow_bb_inside_loop_p (loop
->inner
,
5379 gimple_bb (USE_STMT (use_p
))))
5381 exit_phi
= USE_STMT (use_p
);
5387 stmt_vec_info exit_phi_vinfo
= vinfo_for_stmt (exit_phi
);
5388 if (!(STMT_VINFO_RELEVANT_P (exit_phi_vinfo
)
5389 && !STMT_VINFO_LIVE_P (exit_phi_vinfo
)))
5391 if (dump_enabled_p ())
5392 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
5393 "inner-loop induction only used outside "
5394 "of the outer vectorized loop.\n");
5400 if (!STMT_VINFO_RELEVANT_P (stmt_info
))
5403 /* FORNOW: SLP not supported. */
5404 if (STMT_SLP_TYPE (stmt_info
))
5407 gcc_assert (STMT_VINFO_DEF_TYPE (stmt_info
) == vect_induction_def
);
5409 if (gimple_code (phi
) != GIMPLE_PHI
)
5412 if (!vec_stmt
) /* transformation not required. */
5414 STMT_VINFO_TYPE (stmt_info
) = induc_vec_info_type
;
5415 if (dump_enabled_p ())
5416 dump_printf_loc (MSG_NOTE
, vect_location
,
5417 "=== vectorizable_induction ===\n");
5418 vect_model_induction_cost (stmt_info
, ncopies
);
5424 if (dump_enabled_p ())
5425 dump_printf_loc (MSG_NOTE
, vect_location
, "transform induction phi.\n");
5427 vec_def
= get_initial_def_for_induction (phi
);
5428 *vec_stmt
= SSA_NAME_DEF_STMT (vec_def
);
5432 /* Function vectorizable_live_operation.
5434 STMT computes a value that is used outside the loop. Check if
5435 it can be supported. */
5438 vectorizable_live_operation (gimple stmt
,
5439 gimple_stmt_iterator
*gsi ATTRIBUTE_UNUSED
,
5442 stmt_vec_info stmt_info
= vinfo_for_stmt (stmt
);
5443 loop_vec_info loop_vinfo
= STMT_VINFO_LOOP_VINFO (stmt_info
);
5444 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
);
5450 enum vect_def_type dt
;
5451 enum tree_code code
;
5452 enum gimple_rhs_class rhs_class
;
5454 gcc_assert (STMT_VINFO_LIVE_P (stmt_info
));
5456 if (STMT_VINFO_DEF_TYPE (stmt_info
) == vect_reduction_def
)
5459 if (!is_gimple_assign (stmt
))
5461 if (gimple_call_internal_p (stmt
)
5462 && gimple_call_internal_fn (stmt
) == IFN_GOMP_SIMD_LANE
5463 && gimple_call_lhs (stmt
)
5465 && TREE_CODE (gimple_call_arg (stmt
, 0)) == SSA_NAME
5467 == SSA_NAME_VAR (gimple_call_arg (stmt
, 0)))
5469 edge e
= single_exit (loop
);
5470 basic_block merge_bb
= e
->dest
;
5471 imm_use_iterator imm_iter
;
5472 use_operand_p use_p
;
5473 tree lhs
= gimple_call_lhs (stmt
);
5475 FOR_EACH_IMM_USE_FAST (use_p
, imm_iter
, lhs
)
5477 gimple use_stmt
= USE_STMT (use_p
);
5478 if (gimple_code (use_stmt
) == GIMPLE_PHI
5479 || gimple_bb (use_stmt
) == merge_bb
)
5484 = build_int_cst (unsigned_type_node
,
5485 loop_vinfo
->vectorization_factor
- 1);
5486 SET_PHI_ARG_DEF (use_stmt
, e
->dest_idx
, vfm1
);
5496 if (TREE_CODE (gimple_assign_lhs (stmt
)) != SSA_NAME
)
5499 /* FORNOW. CHECKME. */
5500 if (nested_in_vect_loop_p (loop
, stmt
))
5503 code
= gimple_assign_rhs_code (stmt
);
5504 op_type
= TREE_CODE_LENGTH (code
);
5505 rhs_class
= get_gimple_rhs_class (code
);
5506 gcc_assert (rhs_class
!= GIMPLE_UNARY_RHS
|| op_type
== unary_op
);
5507 gcc_assert (rhs_class
!= GIMPLE_BINARY_RHS
|| op_type
== binary_op
);
5509 /* FORNOW: support only if all uses are invariant. This means
5510 that the scalar operations can remain in place, unvectorized.
5511 The original last scalar value that they compute will be used. */
5513 for (i
= 0; i
< op_type
; i
++)
5515 if (rhs_class
== GIMPLE_SINGLE_RHS
)
5516 op
= TREE_OPERAND (gimple_op (stmt
, 1), i
);
5518 op
= gimple_op (stmt
, i
+ 1);
5520 && !vect_is_simple_use (op
, stmt
, loop_vinfo
, NULL
, &def_stmt
, &def
,
5523 if (dump_enabled_p ())
5524 dump_printf_loc (MSG_MISSED_OPTIMIZATION
, vect_location
,
5525 "use not simple.\n");
5529 if (dt
!= vect_external_def
&& dt
!= vect_constant_def
)
5533 /* No transformation is required for the cases we currently support. */
5537 /* Kill any debug uses outside LOOP of SSA names defined in STMT. */
5540 vect_loop_kill_debug_uses (struct loop
*loop
, gimple stmt
)
5542 ssa_op_iter op_iter
;
5543 imm_use_iterator imm_iter
;
5544 def_operand_p def_p
;
5547 FOR_EACH_PHI_OR_STMT_DEF (def_p
, stmt
, op_iter
, SSA_OP_DEF
)
5549 FOR_EACH_IMM_USE_STMT (ustmt
, imm_iter
, DEF_FROM_PTR (def_p
))
5553 if (!is_gimple_debug (ustmt
))
5556 bb
= gimple_bb (ustmt
);
5558 if (!flow_bb_inside_loop_p (loop
, bb
))
5560 if (gimple_debug_bind_p (ustmt
))
5562 if (dump_enabled_p ())
5563 dump_printf_loc (MSG_NOTE
, vect_location
,
5564 "killing debug use\n");
5566 gimple_debug_bind_reset_value (ustmt
);
5567 update_stmt (ustmt
);
5576 /* Function vect_transform_loop.
5578 The analysis phase has determined that the loop is vectorizable.
5579 Vectorize the loop - created vectorized stmts to replace the scalar
5580 stmts in the loop, and update the loop exit condition. */
5583 vect_transform_loop (loop_vec_info loop_vinfo
)
5585 struct loop
*loop
= LOOP_VINFO_LOOP (loop_vinfo
);
5586 basic_block
*bbs
= LOOP_VINFO_BBS (loop_vinfo
);
5587 int nbbs
= loop
->num_nodes
;
5588 gimple_stmt_iterator si
;
5591 int vectorization_factor
= LOOP_VINFO_VECT_FACTOR (loop_vinfo
);
5593 bool slp_scheduled
= false;
5594 unsigned int nunits
;
5595 gimple stmt
, pattern_stmt
;
5596 gimple_seq pattern_def_seq
= NULL
;
5597 gimple_stmt_iterator pattern_def_si
= gsi_none ();
5598 bool transform_pattern_stmt
= false;
5599 bool check_profitability
= false;
5601 /* Record number of iterations before we started tampering with the profile. */
5602 gcov_type expected_iterations
= expected_loop_iterations_unbounded (loop
);
5604 if (dump_enabled_p ())
5605 dump_printf_loc (MSG_NOTE
, vect_location
, "=== vec_transform_loop ===\n");
5607 /* If profile is inprecise, we have chance to fix it up. */
5608 if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo
))
5609 expected_iterations
= LOOP_VINFO_INT_NITERS (loop_vinfo
);
5611 /* Use the more conservative vectorization threshold. If the number
5612 of iterations is constant assume the cost check has been performed
5613 by our caller. If the threshold makes all loops profitable that
5614 run at least the vectorization factor number of times checking
5615 is pointless, too. */
5616 th
= ((PARAM_VALUE (PARAM_MIN_VECT_LOOP_BOUND
)
5617 * LOOP_VINFO_VECT_FACTOR (loop_vinfo
)) - 1);
5618 th
= MAX (th
, LOOP_VINFO_COST_MODEL_MIN_ITERS (loop_vinfo
));
5619 if (th
>= LOOP_VINFO_VECT_FACTOR (loop_vinfo
) - 1
5620 && !LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo
))
5622 if (dump_enabled_p ())
5623 dump_printf_loc (MSG_NOTE
, vect_location
,
5624 "Profitability threshold is %d loop iterations.\n",
5626 check_profitability
= true;
5629 /* Version the loop first, if required, so the profitability check
5632 if (LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo
)
5633 || LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo
))
5635 vect_loop_versioning (loop_vinfo
, th
, check_profitability
);
5636 check_profitability
= false;
5639 /* Peel the loop if there are data refs with unknown alignment.
5640 Only one data ref with unknown store is allowed. */
5642 if (LOOP_PEELING_FOR_ALIGNMENT (loop_vinfo
))
5644 vect_do_peeling_for_alignment (loop_vinfo
, th
, check_profitability
);
5645 check_profitability
= false;
5648 /* If the loop has a symbolic number of iterations 'n' (i.e. it's not a
5649 compile time constant), or it is a constant that doesn't divide by the
5650 vectorization factor, then an epilog loop needs to be created.
5651 We therefore duplicate the loop: the original loop will be vectorized,
5652 and will compute the first (n/VF) iterations. The second copy of the loop
5653 will remain scalar and will compute the remaining (n%VF) iterations.
5654 (VF is the vectorization factor). */
5656 if ((int) tree_ctz (LOOP_VINFO_NITERS (loop_vinfo
))
5657 < exact_log2 (vectorization_factor
)
5658 || LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo
))
5659 vect_do_peeling_for_loop_bound (loop_vinfo
, &ratio
,
5660 th
, check_profitability
);
5661 else if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo
))
5662 ratio
= build_int_cst (TREE_TYPE (LOOP_VINFO_NITERS (loop_vinfo
)),
5663 LOOP_VINFO_INT_NITERS (loop_vinfo
) / vectorization_factor
);
5666 tree ni_name
, ratio_mult_vf
;
5667 vect_generate_tmps_on_preheader (loop_vinfo
, &ni_name
, &ratio_mult_vf
,
5671 /* 1) Make sure the loop header has exactly two entries
5672 2) Make sure we have a preheader basic block. */
5674 gcc_assert (EDGE_COUNT (loop
->header
->preds
) == 2);
5676 split_edge (loop_preheader_edge (loop
));
5678 /* FORNOW: the vectorizer supports only loops which body consist
5679 of one basic block (header + empty latch). When the vectorizer will
5680 support more involved loop forms, the order by which the BBs are
5681 traversed need to be reconsidered. */
5683 for (i
= 0; i
< nbbs
; i
++)
5685 basic_block bb
= bbs
[i
];
5686 stmt_vec_info stmt_info
;
5689 for (si
= gsi_start_phis (bb
); !gsi_end_p (si
); gsi_next (&si
))
5691 phi
= gsi_stmt (si
);
5692 if (dump_enabled_p ())
5694 dump_printf_loc (MSG_NOTE
, vect_location
,
5695 "------>vectorizing phi: ");
5696 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, phi
, 0);
5697 dump_printf (MSG_NOTE
, "\n");
5699 stmt_info
= vinfo_for_stmt (phi
);
5703 if (MAY_HAVE_DEBUG_STMTS
&& !STMT_VINFO_LIVE_P (stmt_info
))
5704 vect_loop_kill_debug_uses (loop
, phi
);
5706 if (!STMT_VINFO_RELEVANT_P (stmt_info
)
5707 && !STMT_VINFO_LIVE_P (stmt_info
))
5710 if ((TYPE_VECTOR_SUBPARTS (STMT_VINFO_VECTYPE (stmt_info
))
5711 != (unsigned HOST_WIDE_INT
) vectorization_factor
)
5712 && dump_enabled_p ())
5713 dump_printf_loc (MSG_NOTE
, vect_location
, "multiple-types.\n");
5715 if (STMT_VINFO_DEF_TYPE (stmt_info
) == vect_induction_def
)
5717 if (dump_enabled_p ())
5718 dump_printf_loc (MSG_NOTE
, vect_location
, "transform phi.\n");
5719 vect_transform_stmt (phi
, NULL
, NULL
, NULL
, NULL
);
5723 pattern_stmt
= NULL
;
5724 for (si
= gsi_start_bb (bb
); !gsi_end_p (si
) || transform_pattern_stmt
;)
5728 if (transform_pattern_stmt
)
5729 stmt
= pattern_stmt
;
5732 stmt
= gsi_stmt (si
);
5733 /* During vectorization remove existing clobber stmts. */
5734 if (gimple_clobber_p (stmt
))
5736 unlink_stmt_vdef (stmt
);
5737 gsi_remove (&si
, true);
5738 release_defs (stmt
);
5743 if (dump_enabled_p ())
5745 dump_printf_loc (MSG_NOTE
, vect_location
,
5746 "------>vectorizing statement: ");
5747 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
, stmt
, 0);
5748 dump_printf (MSG_NOTE
, "\n");
5751 stmt_info
= vinfo_for_stmt (stmt
);
5753 /* vector stmts created in the outer-loop during vectorization of
5754 stmts in an inner-loop may not have a stmt_info, and do not
5755 need to be vectorized. */
5762 if (MAY_HAVE_DEBUG_STMTS
&& !STMT_VINFO_LIVE_P (stmt_info
))
5763 vect_loop_kill_debug_uses (loop
, stmt
);
5765 if (!STMT_VINFO_RELEVANT_P (stmt_info
)
5766 && !STMT_VINFO_LIVE_P (stmt_info
))
5768 if (STMT_VINFO_IN_PATTERN_P (stmt_info
)
5769 && (pattern_stmt
= STMT_VINFO_RELATED_STMT (stmt_info
))
5770 && (STMT_VINFO_RELEVANT_P (vinfo_for_stmt (pattern_stmt
))
5771 || STMT_VINFO_LIVE_P (vinfo_for_stmt (pattern_stmt
))))
5773 stmt
= pattern_stmt
;
5774 stmt_info
= vinfo_for_stmt (stmt
);
5782 else if (STMT_VINFO_IN_PATTERN_P (stmt_info
)
5783 && (pattern_stmt
= STMT_VINFO_RELATED_STMT (stmt_info
))
5784 && (STMT_VINFO_RELEVANT_P (vinfo_for_stmt (pattern_stmt
))
5785 || STMT_VINFO_LIVE_P (vinfo_for_stmt (pattern_stmt
))))
5786 transform_pattern_stmt
= true;
5788 /* If pattern statement has def stmts, vectorize them too. */
5789 if (is_pattern_stmt_p (stmt_info
))
5791 if (pattern_def_seq
== NULL
)
5793 pattern_def_seq
= STMT_VINFO_PATTERN_DEF_SEQ (stmt_info
);
5794 pattern_def_si
= gsi_start (pattern_def_seq
);
5796 else if (!gsi_end_p (pattern_def_si
))
5797 gsi_next (&pattern_def_si
);
5798 if (pattern_def_seq
!= NULL
)
5800 gimple pattern_def_stmt
= NULL
;
5801 stmt_vec_info pattern_def_stmt_info
= NULL
;
5803 while (!gsi_end_p (pattern_def_si
))
5805 pattern_def_stmt
= gsi_stmt (pattern_def_si
);
5806 pattern_def_stmt_info
5807 = vinfo_for_stmt (pattern_def_stmt
);
5808 if (STMT_VINFO_RELEVANT_P (pattern_def_stmt_info
)
5809 || STMT_VINFO_LIVE_P (pattern_def_stmt_info
))
5811 gsi_next (&pattern_def_si
);
5814 if (!gsi_end_p (pattern_def_si
))
5816 if (dump_enabled_p ())
5818 dump_printf_loc (MSG_NOTE
, vect_location
,
5819 "==> vectorizing pattern def "
5821 dump_gimple_stmt (MSG_NOTE
, TDF_SLIM
,
5822 pattern_def_stmt
, 0);
5823 dump_printf (MSG_NOTE
, "\n");
5826 stmt
= pattern_def_stmt
;
5827 stmt_info
= pattern_def_stmt_info
;
5831 pattern_def_si
= gsi_none ();
5832 transform_pattern_stmt
= false;
5836 transform_pattern_stmt
= false;
5839 gcc_assert (STMT_VINFO_VECTYPE (stmt_info
));
5840 nunits
= (unsigned int) TYPE_VECTOR_SUBPARTS (
5841 STMT_VINFO_VECTYPE (stmt_info
));
5842 if (!STMT_SLP_TYPE (stmt_info
)
5843 && nunits
!= (unsigned int) vectorization_factor
5844 && dump_enabled_p ())
5845 /* For SLP VF is set according to unrolling factor, and not to
5846 vector size, hence for SLP this print is not valid. */
5847 dump_printf_loc (MSG_NOTE
, vect_location
,
5848 "multiple-types.\n");
5850 /* SLP. Schedule all the SLP instances when the first SLP stmt is
5852 if (STMT_SLP_TYPE (stmt_info
))
5856 slp_scheduled
= true;
5858 if (dump_enabled_p ())
5859 dump_printf_loc (MSG_NOTE
, vect_location
,
5860 "=== scheduling SLP instances ===\n");
5862 vect_schedule_slp (loop_vinfo
, NULL
);
5865 /* Hybrid SLP stmts must be vectorized in addition to SLP. */
5866 if (!vinfo_for_stmt (stmt
) || PURE_SLP_STMT (stmt_info
))
5868 if (!transform_pattern_stmt
&& gsi_end_p (pattern_def_si
))
5870 pattern_def_seq
= NULL
;
5877 /* -------- vectorize statement ------------ */
5878 if (dump_enabled_p ())
5879 dump_printf_loc (MSG_NOTE
, vect_location
, "transform statement.\n");
5881 grouped_store
= false;
5882 is_store
= vect_transform_stmt (stmt
, &si
, &grouped_store
, NULL
, NULL
);
5885 if (STMT_VINFO_GROUPED_ACCESS (stmt_info
))
5887 /* Interleaving. If IS_STORE is TRUE, the vectorization of the
5888 interleaving chain was completed - free all the stores in
5891 vect_remove_stores (GROUP_FIRST_ELEMENT (stmt_info
));
5896 /* Free the attached stmt_vec_info and remove the stmt. */
5897 gimple store
= gsi_stmt (si
);
5898 free_stmt_vec_info (store
);
5899 unlink_stmt_vdef (store
);
5900 gsi_remove (&si
, true);
5901 release_defs (store
);
5906 if (!transform_pattern_stmt
&& gsi_end_p (pattern_def_si
))
5908 pattern_def_seq
= NULL
;
5914 slpeel_make_loop_iterate_ntimes (loop
, ratio
);
5916 /* Reduce loop iterations by the vectorization factor. */
5917 scale_loop_profile (loop
, GCOV_COMPUTE_SCALE (1, vectorization_factor
),
5918 expected_iterations
/ vectorization_factor
);
5919 loop
->nb_iterations_upper_bound
5920 = loop
->nb_iterations_upper_bound
.udiv (double_int::from_uhwi (vectorization_factor
),
5922 if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo
)
5923 && loop
->nb_iterations_upper_bound
!= double_int_zero
)
5924 loop
->nb_iterations_upper_bound
= loop
->nb_iterations_upper_bound
- double_int_one
;
5925 if (loop
->any_estimate
)
5927 loop
->nb_iterations_estimate
5928 = loop
->nb_iterations_estimate
.udiv (double_int::from_uhwi (vectorization_factor
),
5930 if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo
)
5931 && loop
->nb_iterations_estimate
!= double_int_zero
)
5932 loop
->nb_iterations_estimate
= loop
->nb_iterations_estimate
- double_int_one
;
5935 if (dump_enabled_p ())
5937 dump_printf_loc (MSG_NOTE
, vect_location
,
5938 "LOOP VECTORIZED\n");
5940 dump_printf_loc (MSG_NOTE
, vect_location
,
5941 "OUTER LOOP VECTORIZED\n");
5942 dump_printf (MSG_NOTE
, "\n");