1 Wed Feb 16 19:00:02 2000 Andrew Cagney <cagney@b1.cygnus.com>
3 From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
4 * procfs.c: Define MERGEPID if not defined. For osf4.0e.
6 2000-02-15 Jason Molenda (jsm@bugshack.cygnus.com)
8 * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
11 2000-02-15 Kevin Buettner <kevinb@redhat.com>
14 * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
15 to correct value for generic dummy frames. When using
16 generic dummy frames, don't attempt to write TOC value or
17 function to call into the call dummy.
18 (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
19 code to also handle the PowerOpen ABI.
20 (ppc_push_return_address): Enable for all ports.
21 * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
22 PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER,
23 CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
24 CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
25 provided by generic RS6000 definitions so that call dummies
26 are implemented using generic dummy frames instead.
28 * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
29 prior to changing the stack pointer via ptrace(). Also, ignore
30 attempts to store to undefined registers that are less than
33 * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
34 frame from 436 to 448 to account for alignment padding.
35 (rs6000_push_arguments): Obtain actual register size instead
36 of assuming the register is 4 bytes long. [There's still
37 more work to be done to totally remove the 4 byte assumption,
38 however.] Make sure the stack is 16 byte aligned as required
39 by the PowerOpen ABI. Also, make sure that small structures
40 passed in registers are properly aligned within the register.
42 2000-02-15 Jesper Skov <jskov@cygnus.co.uk>
44 Patch applied by Kevin Buettner <kevinb@redhat.com>
46 * rs6000-tdep.c (skip_prologue): skip copying of argument
47 registers to local variable registers.
49 2000-02-14 Jim Kingdon <kingdon@redhat.com>
51 * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale. A
52 sym->section->index number is not a SECT_OFF_* code.
54 Tue Feb 15 12:07:30 2000 Andrew Cagney <cagney@b1.cygnus.com>
56 * MAINTAINERS (write after approval): Add H.J. Lu.
58 2000-02-14 Nick Clifton <nickc@cygnus.com>
60 * sh-tdep.c: Remove extraneous code.
62 2000-02-14 Amit S. Kale <akale@veritas.com>
64 * elfread.c (elf_symtab_read): Move the use of sym to after where
66 Checked in by Jim Kingdon <kingdon@redhat.com>
68 Mon Feb 14 15:39:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
70 * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.
72 Mon Feb 14 15:20:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
74 From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
75 * dwarf2read.c: (die_is_declaration): New fn.
76 (read_structure_scope): Use it.
78 * dwarf2read.c: (die_is_declaration): Convert to ISO-C.
80 2000-02-10 J.T. Conklin <jtc@redback.com>
82 * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
83 * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
85 * gdbserver/low-nbsd.c: New file.
87 * gdbserver/Makefile.in: convert to autoconf.
88 * gdbserver/configure.in: likewise.
89 * gdbserver/configure: generate.
91 Sun Feb 13 11:21:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
93 * CONTRIBUTE: New file. How to contribute to GDB.
95 Sun Feb 13 10:34:48 2000 Andrew Cagney <cagney@b1.cygnus.com>
97 * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners. Add Kevin
98 Buettner to powerpc maintainers. Make Kevin Buettner the
99 GNU/LINUX PPC native maintainer. Add J.T. Conklin, Jim Kingdon
100 and Jason Molenda to write after aproval list.
102 Sun Feb 13 10:18:44 2000 Andrew Cagney <cagney@b1.cygnus.com>
104 * MAINTAINERS: Reformat. Separate into check-in categories.
106 Sat Feb 12 01:08:21 EST 2000 Nicholas Duffek <nsd@cygnus.com>
108 * uw-thread.c: Remove __FUNCTION__ GNUism.
110 2000-01-17 Amit S. Kale <akale@veritas.com>
112 * elfread.c (elf_symtab_read): Use offset for the section in which a
113 symbol resides, instead of .text section for calculating address of a
115 Checked in by Jim Kingdon <kingdon@redhat.com>
117 2000-02-10 Mark Kettenis <kettenis@gnu.org>
119 * gnu-nat.c: Remove hackery to include <bits/waitflags.h>. It is
120 no longer necessary now we have gdb_wait.h.
122 2000-02-09 Mark Kettenis <kettenis@gnu.org>
124 * gnu-nat.c (proc_string): Make global.
125 (do_mach_notify_dead_name): Suppress dead name notifications if we
126 know that the task is dead.
128 1999-12-13 Mark Kettenis <kettenis@gnu.org>
130 * gnu-nat.c (inf_validate_task_sc): Get task info via proc server
131 instead of directly from the kernel. Add some hackery to make
132 sure that the info isn't influenced by suspension of the task in
133 the proc server itself.
135 2000-02-10 Jim Kingdon <kingdon@redhat.com>
137 * defs.h (MERGEPID): Added. Patch submitted by Andrew Hobson and
138 approved by Michael Snyder.
140 2000-02-09 Mark Kettenis <kettenis@gnu.org>
142 * linux-thread.c: Include defs.h before gdb_wait.h.
144 Wed Feb 9 18:59:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
146 * Makefile.in (wait_h): Delete macro. Update all dependencies
147 specifying gdb_wait.h instead.
149 * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
150 remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
151 remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
152 convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
153 remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
154 remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
155 remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
156 ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
157 infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
158 fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
160 * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.
162 * gdb_wait.h: New file. Based on ../include/wait.h. Include
163 <sys/wait.h> or <wait.h> and then define any missing WIF macros.
165 Wed Feb 9 01:14:54 2000 Andrew Cagney <cagney@amy.cygnus.com>
167 * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
168 * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
169 (d10v_stack_align): Declare.
170 * d10v-tdep.c (d10v_stack_align): Define.
172 1999-08-23 J.T. Conklin <jtc@redback.com>
174 * top.c (remote_timeout): Change default to 2. Add comment
175 explaining history of changes to the default value.
176 * remote.c (_initialize_remote): Remove code that adds set/
177 show remotetimeout, as that's also done in top.c
179 1999-10-18 J.T. Conklin <jtc@redback.com>
181 * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
182 Return E01 instead of P01 when 'P' command fails.
184 2000-02-05 J.T. Conklin <jtc@redback.com>
186 * remote.c (putpkt_binary): Handle NAK from target stub.
188 2000-02-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
190 * configure.in: Remove the addition of sol-thread.c to the
191 CONFIG_INITS list. This caused problems with init.c, because
192 sol-thread.c would be grepped twice for _initialize_* functions.
194 * Makefile.in: Add FIXME for init.c.
196 2000-02-07 Jim Kingdon <kingdon@redhat.com>
198 Clean up compiler warnings:
199 * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
200 stack.c, valprint.c: Change variables to unsigned.
201 * bcache.c: Rearrange to avoid warnings about variables not being set.
202 * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
203 rather than declaring print_max and repeat_count_threashold
204 ourselves (incorrectly).
205 * valprint.h: Do declare repeat_count_threashold.
206 * ch-exp.c: Use default case for internal error.
207 * findvar.c: Don't omit argument type.
208 * symtab.c: Remove unused variable.
210 2000-02-04 Jim Blandy <jimb@redhat.com>
212 * c-typeprint.c (remove_qualifiers): New function.
213 (c_type_print_base): Use it to remove qualifiers from C++
214 qualified names, not strrchr.
216 * c-typeprint.c (c_type_print_base): Recognize type conversion
217 operators by calling is_type_conversion_operator.
218 (is_type_conversion_operator): New function.
220 2000-02-04 Nick Clifton <nickc@cygnus.com>
222 * config/arm/tm-arm.h (LOWEST_PC): Define.
224 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
226 * infrun.c (resume): Make just one call to target_resume(), instead
227 of four: set up correct parameters in all the cases ahead of time,
228 and do call at the end.
230 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
232 * config/powerpc/tm-ppc-eabi.h: Define
233 SOFUN_ADDRESS_MAYBE_MISSING.
235 2000-02-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
237 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
240 Fri Feb 4 22:42:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
242 * Makefile.in (INIT_FILES): Append CONFIG_INITS
243 * configure.in (CONFIG_INIT): Initialize.
244 (links): Link srcdir/gdbtk/library to gdbtcl2.
245 * gdbtcl2: Moved to gdbtk/library.
246 ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
247 gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
248 gdbtk.h: Moved to gdbtk/generic.
250 2000-02-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
252 * printcmd.c (build_address_symbolic): New function. Returns all
253 the parts that are necessary to print an address in a symbolic
255 (print_address_symbolic): Split into a printing part and an
256 information building part, build_address_symbolic().
258 * defs.h (build_address_symbolic): Export.
260 2000-02-03 Jim Blandy <jimb@redhat.com>
262 * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
265 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
267 * arm-tdep.c (arm_push_arguments): Fix passing of floating point
268 arguments on dummy frames.
270 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
272 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
273 (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
275 2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
277 * remote.c (getpkt_sane): New function. It is the old getpkt(),
278 which now returns a timeout indication.
279 (getpkt): New function. Wrapper for getpkt_sane(), so that return
280 value can still be ignored.
282 Tue Feb 1 18:47:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
284 * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
287 Tue Feb 1 00:17:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
289 * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c. Rename
290 ``struct gdb_file'' to ``struct ui_file''. Delete typedef
293 * Makefile.in: Update.
295 * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
296 c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
297 ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
298 cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
299 expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
300 frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
301 gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
302 jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
303 m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
304 printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
305 remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
306 ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
307 serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
308 target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
309 utils.c, v850ice.c, valprint.c, valprint.h, value.h,
310 config/pa/tm-hppa.h: Update.
311 * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
313 2000-01-31 Jason Molenda (jsm@bugshack.cygnus.com)
315 * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
316 config/i386/i386dgux.mh, config/i386/i386sol2.mh,
317 config/i386/i386v4.mh, config/i386/i386v42mp.mh,
318 config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
319 config/m88k/delta88v4.mh, config/mips/irix4.mh,
320 config/mips/irix5.mh, config/mips/mipsv4.mh,
321 config/powerpc/solaris.mh (NATDEPFILES): Change references to
322 proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
323 proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
325 Mon Jan 31 17:14:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
327 * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
329 * main.c (captured_main): Only use the legacy tui_file code when
330 linking in older code such as the TUI.
332 * gdb-file.h, gdb-file.c: New files.
333 * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
334 null_file_isatty, null_file_rewind, null_file_put,
335 null_file_flush, null_file_write, null_file_fputs,
336 null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
337 gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
338 set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
339 set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
340 set_gdb_file_data, struct accumulated_gdb_file,
341 do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
342 mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
343 mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
344 stdio_file_delete, stdio_file_flush, stdio_file_write,
345 stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
346 Moved to gdb-file.h and gdb-file.c.
347 * utils.c (enum streamtype, struct tui_stream, tui_file_new,
348 tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
349 tui_file_rewind, tui_file_put, tui_file_fputs,
350 tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
351 fputs_unfiltered_hook):
352 Moved to tui/tui-file.c and tui/tui-file.h.
354 * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
355 (tui-file.o, gdb-file.o): Add dependencies.
356 (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
357 * main.c: #include tui/tui-file.h.
359 2000-01-28 Fred Fish <fnf@cygnus.com>
361 * findvar.c (value_from_register): Special case handling of D10V
362 pointer values fetched from registers.
364 2000-01-28 Fernando Nasser <fnasser@totem.to.cygnus.com>
366 * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
367 support for new style thumb prologues.
369 2000-01-28 Nick Clifton <nickc@redhat.com>
371 * arm-tdep.c: Remove extraneous dash at start of strings
372 introduced in previous delta.
374 2000-01-27 Nick Clifton <nickc@redhat.com>
376 * arm-tdep.c: Replace uses of arm_toggle_renames() with
377 parse_arm_disassembler_option().
379 2000-01-27 Jim Blandy <jimb@cygnus.com>
381 * symtab.c (decode_line_1): Don't let commas that are within
382 quotes or parenthesis terminate the line spec. Don't use pp when
383 removing the final double quote of a double-quoted string. Don't
384 forget to skip the opening double quote. I have no clue whether
385 this change is correct; probably we've just moved this function
386 from one buggy place to another buggy place, and never came within
387 an outhouse whiff of correctness.
388 (find_toplevel_char): New function.
390 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
392 * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
393 passing the pointer to a thumb function as an argument.
395 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
397 * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
398 are reinserted for another run.
400 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
402 * cli-out.c (cli_filed_string): Test for NULL string.
404 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
406 * infcmd.c (run_stack_dummy): Account for a random signal stopping
407 the inferior as well as breakpoints being hit while performing an
408 inferior function call.
409 * valops.c (hand_function_call): Ditto.
411 2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
413 From Mark Kettenis <kettenis@gnu.org>
415 * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
416 i386_REGS_SEGS_STATE.
417 (HAVE_I387_REGS): Define.
418 (FLOAT_INFO): Remove.
419 * i386gnu-nat.c: Almost completely rewritten to use new i386
420 register layout and `float info' implementation.
421 * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
422 Move prototypes from here.
423 * gnu-nat.h: To here.
425 2000-01-24 Kevin Buettner <kevinb@redhat.com>
427 * utils.c (get_field, put_field): Fix buffer underruns and
428 overruns. Also, handle case where total_len is not evenly
430 (getfield): Make sure zeroing of unwanted bits occurs even
431 when bit field to extract does not straddle two or more
434 2000-01-23 Christopher Faylor <cgf@cygnus.com>
436 * defs.h: Add gdb_thread_select declaration.
438 2000-01-23 Kevin Buettner <kevinb@redhat.com>
440 * linux-thread.c (_initialize_linuxthreads): Make sure that
441 linuxthreads_block_mask does not block SIGCHLD.
443 2000-01-20 Fernando Nasser <fnasser@totem.to.cygnus.com>
445 * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
446 text so that new lines work properly.
448 2000-01-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
450 * proc-utils.h: New file. Export functions from proc-*.c.
452 * proc_api.c: Rename to:
453 * proc-api.c: New file. Add include of proc-utils.h.
455 * proc_events.c: Rename to:
456 * proc-events.c: New file.
458 * proc_flags.c: Rename to:
459 * proc-flags.c: New file.
461 * proc_why.c: Rename to:
462 * proc-why.c: New file. Add include of proc-utils.h.
464 * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
465 ctype.h, proc-utils.h.
466 (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
467 (open_procinfo_files): Conditionalize local variable tmp, to avoid
469 (proc_iterate_over_mappings): Conditionalize local vars mapfd and
471 (procfs_wait): Adjust format in some printf_filetered calls to
472 avoid compiler warnings.
473 (make_signal_thread_runnable): Ifdef 0. The calls to this function
475 (procfs_resume): Add parentheses around '&&' operation.
476 (procfs_set_exec_trap): Remove unused variable.
477 (info_proc_cmd): Add braces to avoid ambiguous else clause.
479 * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
480 proc-why.o): Update dependencies.
482 * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
485 2000-01-17 Jason Molenda (jsm@bugshack.cygnus.com)
487 * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
488 Fix from Robert Lipe <robertl@sco.com>.
489 * configure: Regenerated.
491 2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
493 * stack.c (print_frame_info_base): Break up into the frame info
494 (location) printing part and the rest (source line printing).
495 (print_frame): New function. Take care of printing the location
499 * infrun.c (normal_stop): Use enum values rather than integers for the
500 source_flag to be passed to show_and_print_stack_frame().
503 * frame.h (print_what): New enum for 'source' argument to
504 print_frame_info_base(). Use this instead of obscure numbers.
507 Sun Jan 16 17:58:00 2000 David Taylor <taylor@texas.cygnus.com>
509 * event-top.c (stdin_event_handler): call quit_command rather than
510 exit -- run cleanups, give target code a chance to say goodbye to
511 the target. Fixes bug where the inferior processes were left
512 around on Solaris (and probably elsewhere) by the testsuite.
514 2000-01-14 Mark Salter <msalter@cygnus.com>
516 * v850-tdep.c (v850_target_architecture_hook): Setup correct
517 machine id for disassembly.
519 2000-01-13 Jim Blandy <jimb@cygnus.com>
521 * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
522 convert_to_regset, when regno indicates a specific register.
524 Thu Jan 13 23:34:17 EST 2000 Nicholas Duffek <nsd@cygnus.com>
526 * uw-thread.c: Document libthread.so debugging interface. Minor
527 comment and formatting tweaks.
528 (DEBUG): #define as 0 instead of 1.
529 (CALL_BASE): Include function name in error msg.
530 (libthread_stub): Adjust inferior_pid after thread exit.
531 (uw_thread_create_inferior): Deactivate uw_thread_ops before
532 asking procfs_ops to create inferior.
533 (libthread_init): Don't return nonlocally on error.
535 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
537 * rdi-share/ardi.c (negotiate_params): Fix initialization of static
540 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
542 * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
543 both sides are on the same state.
545 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
547 * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
548 115200 (minor syntax mistake).
550 2000-01-12 Jim Blandy <jimb@cygnus.com>
552 * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
553 this here, to go along with the definitions of PIDGET and TIDGET.
555 2000-01-12 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
557 * thread.c (do_captured_thread_select): New function. Switch
558 current thread, safely from within catch_errors().
559 (gdb_thread_select): New function. Switch threads safely.
560 (thread_command): Use gdb_thread_select().
562 (do_captured_list_thread_ids): New function.
563 (gdb_list_thread_ids): New function.
565 * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
567 2000-01-11 Christopher Faylor <cgf@cygnus.com>
569 * configure.in: Avoid linking -limagehlp unless it's a native build.
570 * configure: Regenerate.
571 * thread.cc (add_thread): Clear private data pointer here or suffer
572 strange behavior when it is checked for NULL later.
574 2000-01-09 Christopher Faylor <cgf@cygnus.com>
576 * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
577 * configure.in: Add an additional library to cygwin link.
578 * configure: Regenerate.
580 Patch from Egor Duda <deo@logos-m.ru>:
581 * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
584 2000-01-07 Michael Snyder <msnyder@cleaver.cygnus.com>
586 * uw-thread.c: New file to support UnixWare user-mode threads:
587 contributed by Nickolas Duffek <nsd@cygnus.com>.
588 * target.h (struct target_ops): New vector, to_extra_thread_info,
589 allows back-ends to give extra details in info thread display.
590 (target_extra_thread_info): define new macro.
591 (target_find_new_threads): simplify macro. Cleanup comments.
592 * target.c (to_extra_thread_info): default and inherit new vector.
593 (cleanup_target): eliminate PARAMS, break up long lines,
594 provide default definition for to_extra_thread_info, and
595 to_find_new_threads. Default to_thread_alive and to_query
596 to return_zero, not target_ignore (they each return int not void).
597 (debug_to_find_new_threads): new debug entry.
598 (setup_target_debug): add debug_to_find_new_threads.
599 * gdbthread.h: export struct thread_info, find_thread_pid, and
600 iterate_over_threads. Add comments. Eliminate PARAMS. Update
601 copyright. Add new private data pointer for use by target back-ends.
602 * thread.c (struct thread_info): move definition to gdbthread.h.
603 (find_thread_pid): new exported function for thread lookup.
604 (iterate_over_threads): new exported function for applying
605 arbitrary operations to threads. Update copyright to 2000.
606 (info_threads_command): use new target_extra_thread_info vector
607 to display extra information about each thread (if implemented).
608 * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
609 Add defines for PIDGET, etc.
610 * config/i386/tm-i386sol2.h: ditto.
611 * config/sparc/tm-sun4sol2.h: ditto.
612 * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
613 * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
614 if -lpthread and -lpthreads fail.
616 * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
617 (proc_flags): combine flags that UnixWare splits into two locations.
618 (proc_modify_flag): add support for PR_KLC (kill on last close).
619 (proc_[un]set_kill_on_last_close): new functions.
621 2000-01-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
623 * infrun.c (normal_stop): Print out thread id when we stop.
625 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
627 * remote.c (remote_open_1): Fix message so it does not imply a
628 specific syntax for serial ports, as it is OS dependent.
629 (remote_async_open_1): Ibid.
630 (init_remote_ops): Ibid.
632 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
634 * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
635 "set remotebaud" command (if set) when no speed is specified on
636 the "target rdi" command.
638 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
640 * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
642 (baud_options[]): Ibid.
644 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
646 * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
647 used by each operating system.
649 2000-01-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
651 * breakpoint.c (until_break_command): Add an argument for the
652 continuation, the beginning of the cleanups set up by this
654 (until_break_command_continuation): Do cleanups until the one
655 passed in as argument instead of doing all of them.
657 * infcmd.c (finish_command_continuation): Expect a new argument,
658 which indicates up to where to do cleanups. Update calls to
659 do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
660 (finish_command): Add another argument for the continuation: the
661 starting cleanup for this command.
663 2000-01-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
665 From Grant Edwards <grante@visi.com> (original patch from Thomas
667 * rdi-share/ardi.c: Allow interruption of interruptible
668 targets with a <CNTL-C>.
670 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
672 * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
673 to control port to accommodate some versions of Angel.
675 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
677 * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
678 Add interpretation for C Support Library packets.
680 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
682 * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
683 is now being modified.
684 * rdi-share/devsw.h: Adjust declaration of the above funtion.
686 For older changes see ChangeLog-99
692 version-control: never