1 Mon Mar 31 14:55:53 1997 Ian Lance Taylor <ian@cygnus.com>
3 * gdbinit.in: New file.
5 * configure.in: Generate .gdbinit from gdbinit.in.
9 Sun Mar 30 12:28:24 1997 Fred Fish <fnf@cygnus.com>
11 * config/tic80/tic80.mt: Disable using the simulator
15 Sat Mar 29 13:57:20 1997 Fred Fish <fnf@cygnus.com>
17 * COPYING: Install new version of file from FSF.
18 * copying.c (show_copying_command): Update FSF address.
20 Fri Mar 28 18:33:41 1997 Ian Lance Taylor <ian@cygnus.com>
22 * Makefile.in (distclean): Remove .gdbinit.
25 Fri Mar 28 15:37:30 1997 Fred Fish <fnf@ninemoons.com>
27 * config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.
30 Fri Mar 28 15:38:04 1997 Mike Meissner <meissner@cygnus.com>
32 * remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
33 to va_list from void *, since va_list might not be a pointer
37 Fri Mar 28 17:04:02 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
39 * Makefile.in (gdbtk.o): look for GDBTK_LIBRARY in $(datadir) by
40 default, not $(srcdir).
43 Thu Mar 27 14:21:46 1997 Mark Alexander <marka@cygnus.com>
45 * remote-mips.c: Clean up comment and extraneous semicolon
46 for mips_monitor_prompt variable.
48 Thu Mar 27 12:46:58 1997 Mark Alexander <marka@cygnus.com>
50 * remote-mips.c: Add `set monitor-prompt' command.
52 Wed Mar 26 06:47:44 1997 Mark Alexander <marka@cygnus.com>
54 Fix from Peter Schauer:
55 * mdebugread.c (parse_procedure): Set address of procedure to
56 block start; this fixes problems with shared libraries introduced
59 Mon Mar 24 19:43:16 1997 Geoffrey Noer <noer@cygnus.com>
61 * symtab.c (find_pc_symtab): change to support the case
62 where the objfile is reordered and contains both coff and
63 stabs debugging info (continue on if a psymtab isn't found).
65 Sun Mar 23 16:19:20 1997 Mark Alexander <marka@cygnus.com>
67 Fixes from Peter Schauer:
68 * config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
69 REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
70 is big-endian and if registers are 32 bits.
71 * mips-tdep.c (mips_print_register, mips_extract_return_value,
72 mips_store_return_value): Fix floating-point word-order problems on
73 little-endian targets introduced by changes of Mar 21.
75 Sun Mar 23 15:43:27 1997 Stan Shebs <shebs@andros.cygnus.com>
77 * remote.c (target_resume_hook, target_wait_loop_hook): New
79 (remote_resume, remote_wait): Use them.
80 * d10v-tdep.c: Set the above hooks.
81 (tracesource): New GDB variable, controls source display in
83 (display_trace): Find and display source line if requested.
84 (trace_info): Mention empty trace buffer if appropriate.
85 (tdisassemble_command): Robustify argument handling.
87 * configure.host: Remove extra bogus Linux case.
89 Sat Mar 22 16:41:35 1997 Fred Fish <fnf@cygnus.com>
91 * remote-sim.c (simulator_command): Add comment about dealing with
94 * Makefile.in (tic80-tdep.o): Add target.
95 * configure.tgt: Add tic80 case.
96 * tic80-tdep.c: New file.
97 * config/tic80/{tic80.mt, tm-tic80.h}: New files.
100 Sat Mar 22 02:48:11 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
102 * c-exp.y (yylex): Handle nested template parameter lists.
103 * symtab.c (decode_line_2): Fix test for valid choice number.
105 Fri Mar 21 19:10:05 1997 Mark Alexander <marka@cygnus.com>
107 * mips-tdep.c (mips_push_arguments): On non-EABI architectures,
108 copy first two floating point arguments to general registers, so that
109 MIPS16 functions will receive the arguments correctly.
110 (mips_print_register): Print double registers correctly on
112 (mips_extract_return_value): Return double values correctly
113 on little-endian hosts.
115 * mdebugread.c (parse_procedure): Adjust address of procedure relative
116 to address in file descriptor record; this accounts for constant
117 strings that may precede functions in the text section. Remove
118 now-useless lowest_pdr_addr from argument list and all calls.
120 Fri Mar 21 15:36:25 1997 Michael Meissner <meissner@cygnus.com>
122 * configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
123 whether the simulator will be built by whether the Makefile in the
124 simulator directory was built.
126 * configure.in (--enable-sim-powerpc): Delete switch.
127 * configure: Regenerate.
129 Thu Mar 20 20:52:04 1997 Jeffrey A Law (law@cygnus.com)
131 * mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
134 * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
136 (gdb_os_evprintf_filtered): Similarly.
138 Wed Mar 19 16:13:22 1997 Geoffrey Noer <noer@pizza.cygnus.com>
140 New UnixWare 2.1 configuration
141 * config/i386/i386v42mp.mt: new
142 * config/i386/i386v42mp.mh: new
143 * config/i386/tm-i386v42mp.h: new
144 * config/i386/nm-i386v42mp.h: new
145 * configure.tgt: added new entries
146 * configure.host: added new entries
149 Wed Mar 19 15:16:17 1997 Martin M. Hunt <hunt@onions.cygnus.com>
151 * Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
153 * gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
154 to GDBTK_LIBRARY, which is now a path to search.
155 (gdb_path_conv): New function. Convert Cygwin32 pathname to
158 * {aclocal.m4,configure.in}: Changes for Windows builds.
160 * configure: Rebuilt.
163 Mon Mar 17 17:52:00 1997 J.T. Conklin <jtc@cygnus.com>
165 * dsrec.c (load_srec): Print leading zeroes when printing section
168 Mon Mar 17 15:00:16 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
170 * remote-sim.h: Delete - moved to ../include/remote-sim.h.
172 * Makefile.in (remote_utils_h): Update path to remote-sim.h.
174 Fri Mar 7 20:55:28 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
176 * remote-sim.c (flush_stdout, write_stderr, flush_stderr,
177 vprintf_filtered, evprintf_filtered): Callbacks that accept
180 Sat Mar 15 00:50:46 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
182 * breakpoint.c (insert_breakpoints, watchpoint_check,
183 bpstat_stop_status): Do not disable watchpoints going out of scope.
184 (insert_breakpoints): Make sure that the current frame is valid
185 before calling find_frame_addr_in_frame_chain.
187 * top.c (setup_user_args): Handle quotes and backslashes.
188 (print_gdb_version): Update copyright year.
190 Fri Mar 14 15:44:03 1997 Ian Lance Taylor <ian@cygnus.com>
192 * Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.
195 Fri Mar 14 10:01:29 1997 Tom Tromey <tromey@cygnus.com>
197 * configure: Regenerated.
198 * configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
201 Thu Mar 13 22:51:00 1997 Dawn Perchik <dawn@cygnus.com>
203 * utils.c (pollquit, notice_quit): If _WIN32, limit test for
205 (initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols
206 except under wingdb. (Contributed by Martin Hunt).
208 Thu Mar 13 12:40:49 1997 Tom Tromey <tromey@cygnus.com>
210 * configure: Regenerated.
211 * configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
213 Thu Mar 13 11:00:22 1997 Doug Evans <dje@canuck.cygnus.com>
215 * remote-sim.h (sim_state, SIM_DESC): New types.
216 (sim_open): Return a `descriptor' as result.
217 (*): New argument of descriptor result from sim_open.
218 * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
219 (gdbsim_open): Record result of sim_open in gdbsim_desc.
220 Pass argv list to sim_open, argv[0] = pseudo program name.
221 (*): Pass gdbsim_desc to sim_foo fns.
223 Wed Mar 12 14:40:06 1997 Tom Tromey <tromey@cygnus.com>
225 * config.in: Regenerated.
227 * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
228 HAVE_HPUX_THREAD_SUPPORT): Define.
231 Wed Mar 12 14:29:52 1997 Tom Tromey <tromey@cygnus.com>
233 * gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
236 * configure: Regenerated.
237 * configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
242 Tue Mar 11 07:25:27 1997 Mark Alexander <marka@cygnus.com>
244 First cut at supporting simulators in gdbserver:
246 * configure, configure.in: Allow gdbserver to be configured
247 for cross-target environments.
248 * gdbserver/Makefile.in: Add simulator support.
249 * gdbserver/configure.in: Eliminate assumption that host == target.
250 Simplify using gdb/configure.tgt and gdb/configure.host.
251 Fix other minor configuration errors.
252 * gdbserver/low-sparc.c: Fix compile error.
253 * gdbserver/remote-utils.c: Eliminate assumption that registers
254 and addresses are four bytes. Fix minor compile errors and warnings.
255 * gdbserver/server.c: Rewrite numerous instances of identical code
256 for starting inferior processes to call new function start_inferior.
257 Eliminate assumption that registers and addresses are four bytes.
258 * gdbserver/server.h: Add missing prototypes to eliminate compiler
260 * gdbserver/low-sim.c: New file to mate gdbserver with simulators.
261 * config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
262 * config/i386/linux.mh: Eliminate gdbserver support as a first step
263 in moving such support from host to target makefile fragments.
264 * config/i386/linux.mt: Move gdbserver support here from linux.mh.
266 Mon Mar 10 12:27:47 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
268 * symtab.h (INIT_SAL): New macro to initialize symtab_and_line,
269 to insure consistant initialization of unused fields to zero.
270 * symtab.c: replace initializations of sals with new macro INIT_SAL.
271 * breakpoint.c: ditto.
274 * source.c: add call to INIT_SAL macro.
276 Sat Mar 8 00:16:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
278 * sparc-tdep.c (isbranch): Always handle v9 branch instructions,
279 they might get used on 32 bit targets as well.
281 Wed Mar 5 19:34:09 1997 Bob Manson <manson@charmed.cygnus.com>
283 * remote-mips.c (mips_exit_debug): Some IDT boards don't
284 send the full exit string.
286 Wed Mar 5 12:59:27 1997 Jeffrey A Law (law@cygnus.com)
288 * mn10200-tdep.c (mn10200_push_arguments): Handle new calling
290 (mn10200_store_struct_return): Likewise.
292 Tue Mar 4 10:31:02 1997 Mark Alexander <marka@cygnus.com>
294 * mips-tdep.c (mips_fetch_instruction): New function; replace
295 common code throughout with calls to it.
296 (mips_find_saved_regs): Examine MIPS16 entry instruction to determine
297 correct saved addresses of $s0 and $s1.
298 (mips_find_saved_regs, mips16_heuristic_proc_desc): Use MIPS_REGSIZE
299 instead of hardcoded 4.
300 (mips16_skip_prologue): Handle extended instructions correctly.
302 Mon Mar 3 12:29:20 1997 Doug Evans <dje@canuck.cygnus.com>
304 * defs.h (LONGEST): Move #ifndef LONGEST to outside.
305 Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
307 Thu Feb 27 18:54:11 1997 Mark Alexander <marka@cygnus.com>
309 * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
310 New macros for testing, setting, and clearing bit 0 of addresses.
311 Change numerous bits of code where bit 0 was being manipulated
314 Thu Feb 27 14:12:41 1997 Mark Alexander <marka@cygnus.com>
316 * remote-mips.c: Put back the form feeds.
318 Thu Feb 27 12:04:24 1997 Mark Alexander <marka@cygnus.com>
320 * remote-mips.c: Remove form feeds (^L) from source.
321 (mips_initialize): LSI PMON doesn't support 'set regsize' command.
322 (pmon_wait): Don't need to exit and re-enter debug mode on LSI
323 PMON after a continue; it causes target program misbehavior.
324 (mips_fetch_register): Don't fetch unsupported registers; this
325 cuts down on wasted serial traffic.
327 Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com)
329 * configure.in configure (HPUX/OSF thread support): Enable this
330 only when running GCC, since HP's thread header files use ANSI C
331 which is not supported by their default compiler.
333 * configure.host (i[3456]86-*-windows): Disable long long
334 support for WinGDB. Add mswin to configdirs.
335 * configure.in configure: Move calls to configure.host and
336 configure.tgt to the top of configure.in to allow them to set
337 config variables before they are referenced.
339 Tue Feb 25 20:21:52 1997 Stan Shebs <shebs@andros.cygnus.com>
341 * configure.tgt (mips*-*-lnews*): New target.
343 Mon Feb 24 16:35:00 1997 Jeffrey A Law (law@cygnus.com)
345 * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
346 if we're not the innermost frame. Fix minor typos.
348 Sat Feb 22 03:39:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
350 * stabsread.c (read_type): Fix handling of template names
351 with template parameters containing `::'.
353 * valops.c (search_struct_field, search_struct_method):
354 Pass correct valaddr parameter to baseclass_offset.
355 Prevent gdb crashes by making sure that the virtual base pointer
356 from an user object still points to accessible memory.
358 Tue Feb 18 13:36:34 1997 Mark Alexander <marka@cygnus.com>
360 * maint.c: Eliminate -Wall warnings by including some header files.
362 Tue Feb 18 13:06:30 1997 Mark Alexander <marka@cygnus.com>
364 * remote-sim.c (init_callbacks): Undo previous change.
366 Tue Feb 18 11:13:00 1997 Dawn Perchik <dawn@cygnus.com>
368 * maint.c: Fix dereference of pointer.
369 * remote-sim.c: Fix reference of structure member "last_error".
370 * debugify.c: Include config.h to get ANSI definitions.
372 Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com)
374 * remote-vx.c (vx_attach): Fix for PR 11356. Remove code added
375 by kung. It made no sense.
377 Fri Feb 14 13:00:07 1997 Ian Lance Taylor <ian@cygnus.com>
379 * main.c (print_gdb_help): Make static to match declaration.
381 Thu Feb 13 18:18:18 1997 Dawn Perchik <dawn@cygnus.com>
383 * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
385 Wed Feb 12 15:58:00 1997 Dawn Perchik <dawn@cygnus.com>
387 * debugify.c, debugify.h: Make safe for non-ansi compilers.
389 Wed Feb 12 15:30:00 1997 Dawn Perchik <dawn@cygnus.com>
391 * defs.h: Fix prototypes for new cleanup functions.
393 Wed Feb 12 15:08:47 1997 Dawn Perchik <dawn@cygnus.com>
395 * debugify.c, debugify.h: Fix for general gnu use. Remove C++
396 comment, add PARAMS, add license info and fix indentation.
398 Wed Feb 12 14:42:47 1997 Dawn Perchik <dawn@cygnus.com>
400 * debugify.c, debugify.h: New files. Provide common macros
401 for writing debug info to a log file or stdio.
403 Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
405 * c-valprint.c (c_val_print): Fix printing for arrays defined
406 with 0 length. A sticky tag caused this fix from
407 revision 2.32 date: 1996/04/29 23:25:27; author: dawn;
408 state: Exp; lines: +1 -0 branches: 2.32.34;
409 to not make it into devo.
411 Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
413 * defs.h: Fix cntl-C to read from the Windows message queue.
414 Add prototypes for make_final_cleanup (and the other cleanup
416 * remote-e7000.c: Fix sync code to timeout if unable to sync.
417 Change sync code to report status while trying to sync-up
418 with hardware. Add debugging output and document.
419 * ser-e7kpc.c: Swap order of len & offset to match implementation.
420 Add debugging output and document.
421 * serial.c: Add debugging output.
422 * top.c: Add call to do_final_cleanups.
423 Remove conditionals preventing Win32 from getting SIGQUIT.
424 * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
425 chain as a parameter. Extract this generic code from the cleanup
426 routines into separate funtions (*_my_cleanup). Keep old
427 functionality by passing "cleanup_chain" to the new funtions.
428 Define the cleanup chain "final_cleanup_chain" to be a cleanup
429 chain which will be executed only when gdb exits. Add functions
430 (*_final_cleanup) to match the original (*_cleanup) functions.
431 (pollquit, quit, notice_quit): Fix to read cntl-C from the
432 Windows message queue.
435 Tue Feb 11 15:36:31 1997 Doug Evans <dje@canuck.cygnus.com>
437 * m32r-rom.c: #include <sys/types.h>.
438 #ifdef out new load support if wingdb.
439 * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
442 Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com)
445 * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
446 * mn10200-tdep.c (mn10200_store_struct_return): New function.
448 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
449 extracting a return value from a register pair.
451 * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
452 be two byte aligned. Round argument sizes up to two byte boundary.
453 Write out args in two byte hunks.
454 (mn10200_push_return_address): Implement.
455 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
456 structures > 8 bytes (temporary).
457 (STORE_RETURN_VALUE): Likewise.
458 (CALL_DUMMY): No longer undefine.
459 (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
460 (REG_STRUCT_HAS_ADDR): Define.
463 Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
465 * configure.tgt: added r5900.
468 Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
470 * mips-tdep.c (non_heuristic_proc_desc): New function.
471 (find_proc_desc): Move non-heuristic proc search code into separate
473 (gdb_print_insn_mips): Use non-heuristic method to find procedure
474 descriptor, to avoid prologue examination when disassembling.
475 * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
476 aka MicroMeteor board).
477 (mips_exit_debug): Prevent protocol reinitialization if an error
478 occurs while exiting debug mode.
480 Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com)
482 * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
483 comments, formatting, etc. Plus other minor fixes for problems
484 I found during my first pass over the mn10200 port.
485 (mn10200_analyze_prologue): New function.
486 (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
487 * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
488 comments, formatting, etc. Minor fixes for problems I found during
489 my first pass over the mn10200 port.
490 (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
492 (REGISTER_VIRTUAL_TYPE): Define as a long.
493 (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
495 (STORE_RETURN_VALUE): Similarly.
497 * blockframe.c (generic_get_saved_regs): Remove unused variable
499 * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
500 inside #ifdef CALL_DUMMY.
501 (watch_command_1): Initialize target_resources_ok.
502 * command.c (do_setshow_command): Provide dummy initialization
504 * valops.c (find_function_addr): Move function & prototype inside
506 (value_arg_coerce): Similarly.
507 (value_of_variable): Provide dummy initialization of "frame".
509 Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
511 * gdbtk.c (call_wrapper): Clear running_now if an error occurs.
512 This fixes PR 11323, where gdbtk stops responding if an error occurs.
514 Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
516 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
517 to prim_record_minimal_symbol_and_info call that was missed in Jan 3
519 (scan_xcoff_symtab): Ditto.
521 Sun Feb 09 09:23:26 1997 Mark Alexander <marka@cygnus.com>
523 * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
524 from being sent to 32-bit targets by masking off upper bits.
525 * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
526 of PC on 32-bit targets.
527 (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
528 frame setup instruction.
529 (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
530 (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
531 prologue instruction. Fix warnings and bugs found by gcc -Wall.
532 * buildsym.c (finish_block): Improve handling of overlapping blocks;
533 fixes problem on MIPS16 printing function arguments.
535 Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
537 * dwarf2read.c (dwarf2_linkage_name): New function to get
538 the linkage name of a die from DW_AT_MIPS_linkage_name or
540 (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
541 new_symbol): Use it instead of accessing DW_AT_name.
542 (read_partial_die): Use DW_AT_MIPS_linkage name as name of the
543 partial die if present.
544 (dwarf2_add_member_fn): Make a copy of physname on the type obstack.
546 Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com)
548 * blockframe.c (generic_frame_chain_valid): If the new frame
549 is not INNER_THAN the old frame, then it's not valid.
551 Tue Feb 04 09:04:37 1997 Mark Alexander <marka@cygnus.com>
553 * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
554 (mips16_heuristic_proc_desc): Recognize jal(x) instruction.
556 Mon Feb 03 17:57:58 1997 Mark Alexander <marka@cygnus.com>
558 * mips-tdep.c (mips16_decode_reg_save): Distinguish between
559 sd and sw instructions correctly.
560 (heuristic_proc_start): Add support for MIPS16.
561 (mips16_get_imm, mips16_heuristic_proc_desc,
562 mips32_heuristic_proc_desc): New helper functions for
564 (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
565 (mips_push_arguments): Don't align small arguments in EABI.
566 (mips32_skip_prologue): Attempt to shrink code size a little.
569 Mon Feb 3 11:06:05 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
571 * m32r-stub.c: New -- remote protocol support for M32R cpu.
572 * m32r-rom.c: Several experiments with improved download time.
573 * .Sanitize: Add entry for m32r-stub.c
576 Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>
578 * mips-tdep.c (MIPS16_INSTLEN): Define.
579 (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
580 (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
581 of function on MIPS16.
582 (mips32_skip_prologue, mips16_skip_prologue): New helper functions
583 for mips_skip_prologue.
584 (mips_skip_prologue): Recognize both 16- and 32-bit prologues.
586 Wed Jan 29 12:45:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
588 * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
589 ../sim/common/libcommon.a.
591 Tue Jan 28 15:54:13 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
593 * blockframe.c: fix a null pointer ref in generic_get_saved_register
595 Tue Jan 28 15:39:50 1997 Geoffrey Noer <noer@cygnus.com>
597 * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
600 Mon Jan 27 14:31:52 1997 Mark Alexander <marka@cygnus.com>
602 First set of changes for mips16:
603 * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
604 MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
605 (ABOUT_TO_RETURN): Call new function mips_about_to_return.
606 (mips_breakpoint_from_pc, mips_about_to_return): Declare.
607 * mem-break.c (memory_breakpoint_from_pc): New function.
608 (memory_insert_breakpoint, memory_remove_breakpoint): Use
609 memory_breakpoint_from_pc to determine breakpoint contents and size.
610 * target.h (memory_breakpoint_from_pc): Declare.
611 * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
612 to determine size of breakpoint instruction.
613 * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
614 New helper functions for mips_find_saved_regs.
615 (mips_find_saved_regs): Recognize mips16 prologues.
616 (mips_addr_bits_remove): Strip off upper 32 bits of address
617 when target CPU is 32 bits but CORE_ADDR is 64 bits.
618 (mips_step_skips_delay): No branch delay slot on mips16.
619 (gdb_print_insn_mips): Disassemble mips16 code.
620 (mips_breakpoint_from_pc, mips_about_to_return): New functions.
622 Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com)
624 * tm-mn10200.h (NUM_REGS): Decrease to 12.
625 (REGISTER_NAMES): Elimination registers not found on the mn10200.
626 (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
627 (LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
629 Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
631 * dwarf2read.c: Replace integral tag, name and form fields in
632 internal structure definitions with the corresponding enumeration
633 types from dwarf2.h. Add default cases to switches on enumerations
635 Make quoting of string arguments in complaint messages consistent.
636 Check for NULL returns from DW_STRING.
637 (struct partial_die_info): Add sibling and has_type fields, remove
639 (DW_*): Move access macro definitions near the definition of the
641 (struct field_info): New structure to pass information about fields
642 and member functions between die processing routines.
643 (dwarf2_build_psymtabs_hard): Set cu_header_offset.
644 (scan_partial_symbols): Do not enter DW_TAG_subprogram dies into
645 the partial symbol table if the DW_AT_*_pc attributes are missing.
646 Add file scope base type definitions to the partial symbol table.
647 Skip over child dies if the die has a sibling attribute.
648 (add_partial_symbol): Enter global variables with type attributes
649 and without location descriptors into the partial symbol table.
650 Store value of DW_TAG_variable dies in the partial symbol table.
651 Do not enter global variables into the minimal symbol table.
652 Add base type definitions to the partial symbol table.
653 (psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc.
654 (process_die): Move check for DW_AT_low_pc to read_func_scope.
655 Add a typedef symbol for base type definitions to the symbol table.
656 Ignore DW_TAG_inlined_subroutine tags for now.
657 (read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds.
658 (read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds
659 to determine pc bounds, ignore dies with invalid bounds.
660 (dwarf2_get_pc_bounds): New routine to extract and validate the
661 DW_AT_*_pc attributes of a die.
662 (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
663 dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
664 New functions to handle fields and member functions.
665 (read_structure_scope): Rewritten to use them.
666 (read_array_type): Renamed from dwarf_read_array_type.
667 Default upper array bound to describe an array with unspecified
669 Create array types in backwards order, as dwarf2 puts out the array
670 dimensions from left to right.
671 (read_subroutine_type): Handle DW_TAG_unspecified_parameters,
672 DW_AT_artificial and DW_AT_prototyped.
673 (read_base_type): Make an unsigned type for DW_ATE_boolean.
674 Pass objfile to dwarf_base_type.
675 (read_partial_die): Use read_attribute to read in the attributes.
676 Handle DW_AT_sibling and DW_AT_type.
677 Follow references when determining DW_AT_name and DW_AT_external
678 attributes of the die.
679 Validate DW_AT_*_pc attributes.
680 (read_full_die): Use read_attribute to read in the attributes.
681 (read_attribute): New function to read an attribute described
682 by an abbreviated attribute.
683 (new_symbol): Relocate symbol value for DW_TAG_label with baseaddr.
684 Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
685 SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
686 Change symbol class for global variables with a zero valued location
687 descriptor to LOC_UNRESOLVED.
688 Handle DW_AT_const_value attributes for DW_TAG_variable,
689 DW_TAG_formal_parameter and DW_TAG_enumerator.
690 Build a typedef symbol for DW_TAG_base_type.
691 (dwarf2_const_value): New routine to copy a constant value from an
692 attribute to a symbol.
693 (dwarf_base_type): Use passed in objfile, not current_objfile
694 when calling dwarf2_fundamental_type.
695 (dump_die): Use DW_* accessor macros to access values of attributes.
696 (decode_locdesc): Handle DW_OP_plus_uconst.
698 Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
700 * mn10200-tdep.c: New file.
701 * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
702 SP_REGNUM and FP_REGNUM are different, also no lar or lir.
703 * config/mn10200/mn10200.mt: New file.
704 * configure.tgt: add mn10200 entry.
706 Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com)
708 * configure.in configure: Check if host has libdl if doing
711 Tue Jan 21 17:03:26 1997 Geoffrey Noer <noer@cygnus.com>
713 * mn10300-tdep.c: Wrote/fixed implementations of
714 mn10300_frame_chain, mn10300_init_extra_frame_info,
715 mn10300_frame_saved_pc
716 * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
717 and INIT_FRAME_PC macros.
719 Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com)
721 * configure.in configure: Check if host has libm. Make sure we
722 are using gcc when using the -export-dynamic option. Fixes a
723 problem with building under Solaris/SunPro cc.
725 Mon Jan 20 13:52:13 1997 Mark Alexander <marka@cygnus.com>
727 * config/mips/{embed,embed64,embedl,embedl64}.mt:
728 Link in simulator on MIPS embedded targets.
730 Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
732 * blockframe.c (frameless_look_for_prologue): Mark frames
733 with a zero PC as frameless to improve backtraces from core dumps
734 caused by dereferencing a NULL function pointer.
736 Thu Jan 16 14:10:41 1997 Geoffrey Noer <noer@cygnus.com>
738 * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
740 Tue Jan 14 16:01:06 1997 Geoffrey Noer <noer@cygnus.com>
742 * mn10300-tdep.c: made a lot more generic, ripping out code
743 from copied target (no more mn10300_scan_prologue,
744 init_extra_frame_info, and mn10300_fix_call_dummy calls)
745 * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
746 and INIT_FRAME_PC macros
748 Thu Jan 9 11:44:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
750 * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
751 FP_REGISTER_BYTES to compute offsets into the saved frame,
752 since it fails for SPARC targets configured without any
753 FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE.
755 Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com)
757 * symtab.c (fixup_symbol_section): Handle NULL symbols without
760 Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com)
762 * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
763 ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
765 * configure configure.in: Clean up test cases around thread support.
767 * configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
770 * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
771 printcmd.c valops.c value.h values.c: Add bfd_section arg to
772 value_at and value_at_lazy.
773 * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
774 Add bfd_section arg to prim_record_minimal_symbol_and_info.
775 * corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
776 instead of read_memory. It takes a bfd_section arg.
777 * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
778 unnecessary cast for assignment of struct dbx_symfile_info.
779 Struct objfile now uses a real pointer instead of PTR for this
781 * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
782 text, data and bss into dbx_symfile_info.
783 * exec.c (xfer_memory): Handle transfers for user-specified
785 * findvar.c (read_var_value locate_var_value): Copy bfd section
786 from the symbol to the value.
787 * gdb-stabs.h: Add section pointers for text, data and bss
789 * maint.c (translate address command): Add test code for overlay
791 * printcmd.c (do_examine do_one_display): Now takes a bfd section
793 * (print_formatted x_command): Record current section along with
794 current address for repeated commands.
795 * sparc-nat.c (fetch_inferior_registers): Change
796 target_xfer_memory to target_{read write}_memory to allow changes
797 to target_xfer_memory interface for section info.
798 * symmisc.c (dump_msymbols print_symbol): Print section
799 assocaited with symbol.
800 * symtab.c (fixup_symbol_section): New routine to
801 add section info to symbols returned by lookup_symbol.
802 * symtab.h (struct general_symbol_info): Add bfd section to
804 * target.c target.h (target_xfer_memory): Add bfd section to
806 * (target_read_memory_section): New routine to read data from a
808 * (target_memory_bfd_section): New global variable to pass bfd
809 section in to targets.
810 * valarith.c (value_add value_addr value_array): Preserve bfd
811 section when computing new value.
812 * value.h (struct value): Add bfd section to values.
813 * values.c (allocate_value value_copy): Initialize/preserve bfd
815 * (unpack_double): Clean up _MSC_VER conditionals to remove
818 * v850ice.c: New module to support communication with NEC's
820 * config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
821 ep names with rxx names. sp and fp are renamed via a different
825 Fri Jan 3 14:20:05 1997 Geoffrey Noer <noer@cygnus.com>
827 * mn10300-tdep.c (mn10300_push_arguments): rewrote,
828 also removed code elsewhere that made use of RP_REGNUM.
829 * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
830 ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
831 arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
832 EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
834 For older changes see ChangeLog-96
840 version-control: never