gdb/ChangeLog

   1 2011-02-14  Pedro Alves  <pedro@codesourcery.com>
   2
   3         * target.c (target_read_live_memory): New function.
   4         (memory_xfer_live_readonly_partial): New.
   5         (memory_xfer_partial): If reading from a traceframe, fallback to
   6         reading unavailable read-only memory from read-only regions of
   7         live target memory.
   8         * tracepoint.c (disconnect_tracing): Adjust.
   9         (set_current_traceframe): New, factored out from
  10         set_traceframe_number.
  11         (set_traceframe_number): Reimplement to only change the traceframe
  12         number on the GDB side.
  13         (do_restore_current_traceframe_cleanup): Adjust.
  14         (make_cleanup_restore_traceframe_number): New.
  15         (cur_traceframe_number): New global.
  16         (tfile_open): Set cur_traceframe_number to no traceframe.
  17         (set_tfile_traceframe): New function.
  18         (tfile_trace_find): If looking up a traceframe using any method
  19         other than by number, make sure the current tfile traceframe
  20         matches gdb's current traceframe.  Update the current tfile
  21         traceframe if the lookup succeeded.
  22         (tfile_fetch_registers, tfile_xfer_partial)
  23         (tfile_get_trace_state_variable_value): Make sure the remote
  24         traceframe matches gdb's current traceframe.
  25         * remote.c (remote_traceframe_number): New global.
  26         (remote_open_1): Set it to -1.
  27         (set_remote_traceframe): New function.
  28         (remote_fetch_registers, remote_store_registers)
  29         (remote_xfer_memory, remote_xfer_partial)
  30         (remote_get_trace_state_variable_value): Make sure the remote
  31         traceframe matches gdb's current traceframe.
  32         (remote_trace_find): If looking up a traceframe using any method
  33         other than by number, make sure the current remote traceframe
  34         matches gdb's current traceframe.  Update the current remote
  35         traceframe if the lookup succeeded.
  36         * infrun.c (fetch_inferior_event): Adjust.
  37         * tracepoint.h (set_current_traceframe): Declare.
  38         (get_traceframe_number, set_traceframe_number): Add describing
  39         comments.
  40
  41 2011-02-14  Pedro Alves  <pedro@codesourcery.com>
  42
  43         Mark pieces of values as unavailable if the corresponding memory
  44         is unavailable.
  45
  46         * valops.c: Include tracepoint.h.
  47         (value_fetch_lazy): Use read_value_memory.
  48         (read_value_memory): New.
  49         * value.h (read_value_memory): Declare.
  50         * dwarf2loc.c (read_pieced_value): Use read_value_memory.
  51         * exec.c (section_table_available_memory): New function.
  52         * exec.h (section_table_available_memory): Declare.
  53
  54 2011-02-14  Pedro Alves  <pedro@codesourcery.com>
  55
  56         * Makefile.in (SFILES): Add memrange.c.
  57         (HFILES_NO_SRCDIR): Add memrange.h.
  58         (COMMON_OBS): Add memrange.o.
  59         * memrange.c: New file.
  60         * memrange.h: New file.
  61         * tracepoint.c: Include memrange.h.
  62         (struct mem_range): Delete.
  63         (mem_range_s): Delete.
  64         (traceframe_available_memory): New function.
  65         * tracepoint.h (traceframe_available_memory): Declare.
  66
  67 2011-02-14  Pedro Alves  <pedro@codesourcery.com>
  68
  69         * target.h (struct traceframe_info): Forward declare.
  70         (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
  71         (struct target_ops) <to_traceframe_info>: New field.
  72         (target_traceframe_info): New.
  73         * target.c (update_current_target): Inherit and default
  74         to_traceframe_info.
  75         * remote.c (PACKET_qXfer_traceframe_info): New.
  76         (remote_protocol_features): Register qXfer:traceframe-info:read.
  77         (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
  78         (remote_traceframe_info): New.
  79         (init_remote_ops): Install it.
  80         (_initialize_remote): Install "set/show remote traceframe-info"
  81         commands.
  82         * tracepoint.h (parse_traceframe_info): Declare.
  83         * tracepoint.c (struct mem_range): New.
  84         (mem_range_s): New typedef.
  85         (struct traceframe_info): New.
  86         (traceframe_info): New global.
  87         (free_traceframe_info): New function.
  88         (clear_traceframe_info): New function.
  89         (start_tracing, tfind_1, set_traceframe_number): Clear traceframe
  90         info.
  91         (build_traceframe_info): New function.
  92         (tfile_traceframe_info): New function.
  93         (init_tfile_ops): Install tfile_traceframe_info.
  94         (traceframe_info_start_memory, free_result): New functions.
  95         (memory_attributes, traceframe_info_elements): New globals.
  96         (parse_traceframe_info, get_traceframe_info): New functions.
  97         * features/traceframe-info.dtd: New file.
  98         * Makefile.in (XMLFILES): Add traceframe-info.dtd.
  99
 100 2011-02-14  Pedro Alves  <pedro@codesourcery.com>
 101
 102         Base support for <unavailable> value contents.
 103
 104         * value.h (value_bytes_available): Declare.
 105         (mark_value_bytes_unavailable): Declare.
 106         * value.c (struct range): New struct.
 107         (range_s): New typedef.
 108         (ranges_overlap): New function.
 109         (range_lessthan): New function.
 110         (ranges_contain_p): New function.
 111         (struct value) <unavailable>: New field.
 112         (value_bytes_available): New function.
 113         (mark_value_bytes_unavailable): New function.
 114         (require_not_optimized_out): Constify parameter.
 115         (require_available): New function.
 116         (value_contents_all, value_contents): Require all bytes be
 117         available.
 118         (value_free): Free `unavailable'.
 119         (value_copy): Copy `unavailable'.
 120         * valprint.h (val_print_unavailable): Declare.
 121         * valprint.c (valprint_check_validity): Rename `offset' parameter
 122         to `embedded_offset'.  If printing a scalar, check whether the
 123         value chunk is available.
 124         (val_print_unavailable): New.
 125         (val_print_scalar_formatted): Check whether the value is
 126         available.
 127         * python/py-prettyprint.c (apply_val_pretty_printer): Refuse
 128         pretty-printing unavailable values.
 129
 130 2011-02-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
 131
 132         Fix const/volatile qualifiers of C++ types, PR c++/12328.
 133         * c-typeprint.c (c_type_print_args): Update the function comment.  New
 134         variable param_type, initialize it.  Remove const/volatile qualifiers
 135         for language_cplus and !show_artificial.  Use param_type.
 136
 137 2011-02-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
 138
 139         * symtab.c (find_pc_sect_line): New variable objfile, initialize it
 140         from S.  Iterate S using ALL_OBJFILE_SYMTABS.  Verify BV for each S.
 141         * symtab.h (struct symtab) <next>: Comment extension.
 142
 143 2011-02-12  Yao Qi  <yao@codesourcery.com>
 144
 145         * Makefile.in (CLEANDIRS): Remove duplicated common dir.
 146
 147 2011-02-11  Pedro Alves  <pedro@codesourcery.com>
 148
 149         * infrun.c (proceed): Move switching out and in of tfind mode from
 150         here ...
 151         (fetch_inferior_event): ... to here.
 152
 153 2011-02-11  Yao Qi  <yao@codesourcery.com>
 154
 155         * Makefile.in: Remove signals.o from COMMON_OBS.  Link
 156         libcommon.a.
 157         * configure.ac: Add common to sub dir.
 158         * configure: Regenerate.
 159
 160 2011-02-10  Pedro Alves  <pedro@codesourcery.com>
 161
 162         * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
 163         side of the parenthesis.
 164
 165         Merge from GCC:
 166         2010-07-13  Jakub Jelinek  <jakub@redhat.com>
 167         * vec.h (VEC_block_remove): Fix comment.
 168
 169 2011-02-08  Michael Snyder  <msnyder@vmware.com>
 170
 171         * linux-nat.c (linux_nat_filter_event): Fix typo in comment.
 172
 173 2011-02-08  Jan Kratochvil  <jan.kratochvil@redhat.com>
 174
 175         * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
 176         in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
 177         psubd and paddd.
 178
 179 2011-02-08  Jan Kratochvil  <jan.kratochvil@redhat.com>
 180
 181         PR 12361.
 182         * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
 183         phsubsw.
 184         (i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
 185         (i386_process_record) <0x0f3807>: Fix the comment to phsubsw.
 186
 187 2011-02-08  Ulrich Weigand  <uweigand@de.ibm.com>
 188
 189         * dwarf2read.c (read_subroutine_type): Set special calling
 190         convention flag for functions compiled by IBM XL C for OpenCL.
 191         * ppc-sysv-tdep.c: Include "dwarf2.h"
 192         (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
 193         calling convention.
 194         (do_ppc_sysv_return_value): Add FUNC_TYPE argument.  Implement
 195         IBM OpenCL vector types calling convention.
 196         (ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
 197         (ppc_sysv_abi_broken_return_value): Likewise.
 198         (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
 199         types calling convention.
 200         (ppc64_sysv_abi_return_value): Likewise.
 201         * spu-tdep.c: Include "dwarf2.h"
 202         (spu_return_value): Implement IBM OpenCL vector types calling
 203         convention.
 204
 205 2011-02-08  Ulrich Weigand  <uweigand@de.ibm.com>
 206
 207         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
 208         correct ABI for AltiVec vector arguments.
 209
 210 2011-02-07  Pedro Alves  <pedro@codesourcery.com>
 211
 212         * valprint.c (val_print): Extend comment.
 213         * ada-valprint.c (ada_valprint): Rewrite comment deferring
 214         interface explanation to val_print.
 215         (ada_val_print_array): Adjust comment to current interface.
 216         (print_field_values): Adjust comment to current interface.
 217         * c-valprint.c (c_val_print): Rewrite comment deferring interface
 218         explanation to val_print.
 219         * f-valprint.c (f_val_print): Ditto.
 220         * jv-valprint.c (java_val_print): Ditto.
 221         * m2-valprint.c (m2_val_print): Ditto.
 222         * p-valprint.c (pascal_val_print): Ditto.
 223
 224 2011-02-07  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 225
 226         * breakpoint.c (parse_breakpoint_sals): Fix description.
 227
 228 2011-02-04  Sami Wagiaalla  <swagiaal@redhat.com>
 229             Oguz Kayral <oguzkayral@gmail.com>
 230
 231         * python/py-inferior.c (python_on_normal_stop): New function.
 232         (python_on_resume): New function.
 233         (python_inferior_exit): New function.
 234         (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
 235         inferior_exit observers.
 236         * python/py-evtregistry.c: New file.
 237         * python/py-threadevent.c : New file.
 238         * python/py-event.c: New file.
 239         * python/py-evts.c: New file.
 240         * python/py-continueevent.c: New file.
 241         * python/py-bpevent.c: New file.
 242         * python/py-signalevent.c: New file.
 243         * python/py-exetiedevent.c: New file.
 244         * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
 245         Move struct breakpoint_object from here...
 246         * python/python-internal.h: ... to here.
 247         * python/py-event.h: New file.
 248         * python/py-events.h: New file.
 249         * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
 250         py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
 251         py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
 252         (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
 253         py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
 254         py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
 255         Add build rules for all the above.
 256
 257 2011-02-04  Tom Tromey  <tromey@redhat.com>
 258
 259         * dwarf2read.c (dwarf2_section_empty_p): New function.
 260         (dwarf2_read_section): Use dwarf2_section_empty_p.
 261         (dwarf2_section_size): New function.
 262         (dwarf2_get_section_info): Unconditionally read section.
 263         (dwarf2_read_index): Use dwarf2_section_empty_p.
 264         (partial_read_comp_unit_head): Use dwarf2_section_size.
 265         (dwarf2_symbol_mark_computed): Likewise.
 266
 267 2011-02-04 David Daney <ddaney@caviumnetworks.com>
 268
 269         * NEWS: Add item for "catch syscall" on mips*-linux* targets.
 270
 271 2011-02-04 David Daney <ddaney@caviumnetworks.com>
 272
 273         * mips-linux-tdep.c: Include xml-syscall.h.
 274         (mips_linux_get_syscall_number): New function.
 275         (mips_linux_init_abi): Add calls to
 276         mips_linux_get_syscall_number() and set_xml_syscall_file_name().
 277         * data-directory/Makefile.in (SYSCALLS_FILES): Add
 278         mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
 279         * syscalls/mips-n32-linux.xml: New file.
 280         * syscalls/mips-n64-linux.xml: New file.
 281         * syscalls/mips-o32-linux.xml: New file.
 282
 283 2011-02-04  Ulrich Weigand  <ulrich.weigand@linaro.org>
 284
 285         * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
 286         Complain about inverted range entries.
 287         (dwarf2_record_block_ranges): Likewise.
 288
 289 2011-02-04  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 290
 291         Fix some typos.
 292         * breakpoint.c (update_watchpoint): Fix name of the
 293         update_global_location_list function.
 294         (print_one_breakpoint): Fix typo.
 295         (_initialize_breakpoint): Remove extra space in hbreak help
 296         string.
 297         * breakpoint.h (struct bp_location) <length>: Fix field
 298         description.
 299
 300 2011-02-04  Pedro Alves  <pedro@codesourcery.com>
 301
 302         * regcache.c (registers_changed_ptid): Don't explictly always
 303         clear `current_regcache'.  Only clear current_thread_ptid and
 304         current_thread_arch when PTID matches.  Only reinit the frame
 305         cache if PTID matches the current inferior_ptid.  Move alloca(0)
 306         call to ...
 307         (registers_changed): ... here.
 308
 309 2011-02-03  Ulrich Weigand  <ulrich.weigand@linaro.org>
 310
 311         * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
 312         starts with __stack_chk_guard as stack guard symbol.
 313
 314 2011-02-03  Andrew Burgess  <aburgess@broadcom.com>
 315
 316         * disasm.c (compare_lines): Handle the end of sequence markers
 317         within the line table to better support disassembling over
 318         compilation unit boundaries.
 319
 320 2011-02-02  Ulrich Weigand  <ulrich.weigand@linaro.org>
 321
 322         * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
 323         arguments.  Skip in-prologue calls to glibc __aeabi_read_tp
 324         implementation even if no symbols are available.
 325         (thumb_analyze_prologue): Update call to skip_prologue_function.
 326         (arm_analyze_prologue): Likewise.
 327
 328 2011-02-02  Ulrich Weigand  <ulrich.weigand@linaro.org>
 329
 330         * arm-tdep.c: Include "observer.h".
 331         (arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
 332         (arm_exidx_data_key): New static variable.
 333         (struct arm_exidx_entry, arm_exidx_entry_s): New data types.
 334         (struct arm_exidx_data): Likewise.
 335         (arm_exidx_data_free): New function.
 336         (arm_compare_exidx_entries): Likewise.
 337         (arm_obj_section_from_vma): Likewise.
 338         (arm_exidx_new_objfile): Likewise.
 339         (arm_find_exidx_entry): Likewise.
 340         (arm_exidx_fill_cache): Likewise.
 341         (arm_exidx_unwind_sniffer): Likewise.
 342         (arm_exidx_unwind): New global variable.
 343         (arm_gdbarch_init): Append unwinder arm_exidx_unwind.
 344         (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
 345         observer.  Register arm_exidx_data_key as objfile data.
 346
 347 2011-02-02  Ulrich Weigand  <ulrich.weigand@linaro.org>
 348
 349         * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
 350         due to accessing uninitialized variable.  Fix indentation.
 351
 352 2011-02-02  Pedro Alves  <pedro@codesourcery.com>
 353
 354         * c-valprint.c (c_value_print): When doing virtual base pointer
 355         adjustment, create a new value with adjusted contents rather than
 356         changing the contents of the value being printed (and getting it
 357         wrong).
 358
 359 2011-02-02  Pedro Alves  <pedro@codesourcery.com>
 360
 361         * xml-support.c (xml_find_attribute): New.
 362         (xinclude_start_include): Use it.
 363         * xml-support.h (xml_find_attribute): Declare.
 364         * memory-map.c (memory_map_start_memory)
 365         (memory_map_start_property): Use xml_find_attribute.
 366         * osdata.c (osdata_start_osdata, osdata_start_column): Use
 367         xml_find_attribute.
 368         * remote.c (start_thread): Use xml_find_attribute.
 369         * solib-target.c (library_list_start_segment)
 370         (library_list_start_section, library_list_start_library)
 371         (library_list_start_list): Use xml_find_attribute.
 372         * xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
 373         (tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
 374         (tdesc_start_field): Use xml_find_attribute.
 375
 376 2011-02-02  Ulrich Weigand  <uweigand@de.ibm.com>
 377
 378         * opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
 379         (BUILD_OCL_VTYPES): Update.
 380
 381 2011-02-02  Joel Brobecker  <brobecker@adacore.com>
 382
 383         * configure.ac: Work around non-GNU sed limitation when computing
 384         python version number.
 385         * configure: Regenerate.
 386
 387 2011-02-01  Jan Kratochvil  <jan.kratochvil@redhat.com>
 388
 389         Fix debug printing of TYPE_INSTANCE.
 390         * expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
 391         (dump_subexp_body_standard) <TYPE_INSTANCE>: New.
 392
 393 2011-02-01  Jan Kratochvil  <jan.kratochvil@redhat.com>
 394
 395         Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
 396         OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
 397         OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
 398         * ada-operator.inc: Rename the file to ...
 399         * ada-operator.def: ... here, wrap all the entries by macro OP.
 400         * expprint.c (op_name_standard): Remove all the entries.  Include
 401         "std-operator.def" instead.
 402         * expression.h (enum exp_opcode): Include "std-operator.def" and
 403         "ada-operator.def".  Move all the entries ...
 404         * std-operator.def: ... here, wrap all the entries by macro OP.
 405
 406 2011-01-31  Paul Pluzhnikov  <ppluzhnikov@google.com>
 407
 408         * breakpoint.h (remove_jit_event_breakpoints): New prototype.
 409         * breakpoint.c (remove_jit_event_breakpoints): New function.
 410         * jit.c (jit_descriptor_addr): Delete.
 411         (registering_code): Delete.
 412         (clear_int): Delete.
 413         (jit_inferior_data): New variable.
 414         (struct jit_inferior_data): New type.
 415         (get_jit_inferior_data): New function.
 416         (jit_inferior_data_cleanup): New function.
 417         (jit_read_descriptor): Adjust.
 418         (jit_register_code): Adjust.
 419         (jit_breakpoint_re_set_internal): New function; move code here ...
 420         (jit_inferior_init): ... from here.
 421         (jit_breakpoint_re_set): Adjust.
 422         (jit_reset_inferior_data_and_breakpoints): New function.
 423         (jit_inferior_created_observer): Adjust.
 424         (jit_inferior_exit_hook): Adjust.
 425         (jit_executable_changed_observer): New function.
 426         (jit_event_handler): Adjust.
 427         (_initialize_jit): Adjust.
 428
 429 2011-01-31  Michael Snyder  <msnyder@vmware.com>
 430
 431         * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
 432         line.
 433
 434 2011-01-31  Tom Tromey  <tromey@redhat.com>
 435
 436         PR python/12216:
 437         * python/python.c (execute_gdb_command): Call
 438         prevent_dont_repeat.
 439         * top.c (suppress_dont_repeat): New global.
 440         (dont_repeat): Use it.
 441         (prevent_dont_repeat): New function.
 442         * command.h (prevent_dont_repeat): Declare.
 443
 444 2011-01-31  Tom Tromey  <tromey@redhat.com>
 445
 446         * infcmd.c (finish_backward): Use breakpoint_set_silent.
 447         * python/py-breakpoint.c (bppy_set_silent): Use
 448         breakpoint_set_silent.
 449         (bppy_set_thread): Use breakpoint_set_thread.
 450         (bppy_set_task): Use breakpoint_set_task.
 451         * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
 452         (breakpoint_set_task): Declare.
 453         (make_breakpoint_silent): Remove.
 454         * breakpoint.c (breakpoint_set_silent): New function.
 455         (breakpoint_set_thread): Likewise.
 456         (breakpoint_set_task): Likewise.
 457         (make_breakpoint_silent): Remove.
 458
 459 2011-01-31  Tom Tromey  <tromey@redhat.com>
 460
 461         * breakpoint.h (user_breakpoint_p): Declare.
 462         * breakpoint.c (user_breakpoint_p): New function.
 463         (breakpoint_1): Use it.
 464         (save_breakpoints): Likewise.
 465
 466 2011-01-31  Joel Brobecker  <brobecker@adacore.com>
 467
 468         * configure.ac: Add handling of Python distribution on Windows.
 469         * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
 470         sysconfig variables are not defined, then do not use them.
 471         On Windows, if LIBPL is not defined, then use prefix + '/libs'
 472         instead.  On Windows, return all paths using forward-slashes
 473         rather than backslashes.
 474
 475 2011-01-31  Joel Brobecker  <brobecker@adacore.com>
 476
 477         * configure.ac: Remove fallback behavior for building
 478         against Python.  Remove tweaking of Python include path.
 479         Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
 480         (AC_TRY_LIBPYTHON):  Adjust program used in linking test.
 481         If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
 482         Always restore CPPFLAGS and LIBS after linking test.
 483         * configure: Regenerated.
 484         * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
 485         (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
 486         * python/python-internal.h: Adjust includes of Python .h files.
 487
 488 2011-01-31  Joel Brobecker  <brobecker@adacore.com>
 489
 490         * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup
 491         in error message.
 492
 493 2011-01-31  Joel Brobecker  <brobecker@adacore.com>
 494
 495         * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
 496         value test.
 497
 498 2011-01-31  Yao Qi  <yao@codesourcery.com>
 499
 500         * arm-linux-nat.c: Update calls to regcache_register_status
 501         instead of regcache_valid_p.
 502         * aix-thread.c: Likewise.
 503         * i386gnu-nat.c: Likewise.
 504
 505 2011-01-29  Jan Kratochvil  <jan.kratochvil@redhat.com>
 506
 507         Fix crash.
 508         * valops.c (compare_parameters): Verify TYPE_NFIELDS before
 509         touching TYPE_FIELD_ARTIFICIAL.
 510
 511 2011-01-28  Richard Earnshaw  <rearnsha@arm.com>
 512
 513         * MAINTAINERS: Move myself from Responsible Maintainers to Authorized
 514         Committers.
 515
 516 2011-01-28  Pedro Alves  <pedro@codesourcery.com>
 517
 518         * tracepoint.c (tfile_xfer_partial): If there's no traceframe
 519         selected, don't try iterating over the traceframe's blocks.
 520         (tfile_has_stack): If there's no traceframe selected, then there's
 521         no stack.
 522         (tfile_has_registers): If there's no traceframe selected, then
 523         there's no registers.
 524
 525 2011-01-28  Pedro Alves  <pedro@codesourcery.com>
 526
 527         * target.c (memory_xfer_partial): No need to restore shadows if we
 528         haven't read anything.
 529
 530 2011-01-28  Pedro Alves  <pedro@codesourcery.com>
 531
 532         * mips-tdep.c (mips_print_register): Use get_frame_register_value
 533         and val_print_scalar_formatted.
 534
 535 2011-01-27  Pedro Alves  <pedro@codesourcery.com>
 536
 537         * tracepoint.c (tfile_read): New.
 538         (tfile_open): Use it.
 539         (tfile_get_traceframe_address): Use it.
 540         (tfile_trace_find): Use it.
 541         (walk_blocks_callback_func): New typedef.
 542         (match_blocktype): New function.
 543         (traceframe_walk_blocks): New function.
 544         (traceframe_find_block_type): New function.
 545         (tfile_fetch_registers, tfile_xfer_partial)
 546         (tfile_get_trace_state_variable_value): Use
 547         traceframe_find_block_type and tfile_read.
 548
 549 2011-01-26  Kevin Buettner  <kevinb@redhat.com>
 550
 551         * remote-mips.c: Add internationalization mark ups.  Remove
 552         trailing \n from already marked up strings.
 553
 554 2011-01-26  Tom Tromey  <tromey@redhat.com>
 555
 556         * python/py-prettyprint.c (print_string_repr): Clear
 557         'addressprint' option when calling val_print_string.
 558         (print_children): Handle Val_pretty_default.  Clear 'addressprint'
 559         option when calling val_print_string.
 560
 561 2011-01-26  Tom Tromey  <tromey@redhat.com>
 562
 563         * python/python.c (gdbpy_solib_name): Use gdb_py_longest and
 564         GDB_PY_LL_ARG.
 565         * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New
 566         macros.
 567         (gdb_py_longest, gdb_py_ulongest): New typedefs.
 568         (gdb_py_long_from_longest, gdb_py_long_from_ulongest)
 569         (gdb_py_long_as_ulongest): New defines.
 570         (gdb_py_object_from_longest, gdb_py_object_from_ulongest)
 571         (gdb_py_int_as_long): Declare.
 572         * python/py-value.c (valpy_lazy_string): Use gdb_py_longest,
 573         GDB_PY_LL_ARG, gdb_py_object_from_longest.
 574         (valpy_long): Add comment.
 575         * python/py-utils.c (get_addr_from_python): Use
 576         gdb_py_long_as_ulongest.  Handle overflow properly.
 577         (gdb_py_object_from_longest): New function.
 578         (gdb_py_object_from_ulongest): Likewise.
 579         (gdb_py_int_as_long): Likewise.
 580         * python/py-type.c (typy_array): Use gdb_py_int_as_long.
 581         * python/py-symtab.c (salpy_get_pc): Use
 582         gdb_py_long_from_ulongest.
 583         (salpy_get_line): Use PyInt_FromLong.
 584         * python/py-param.c (set_parameter_value): Use
 585         gdb_py_int_as_long.
 586         * python/py-lazy-string.c (stpy_get_address): Use
 587         gdb_py_long_from_ulongest.
 588         * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest.
 589         * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long.
 590         * python/py-breakpoint.c (bppy_set_thread): Use
 591         gdb_py_int_as_long.
 592         (bppy_set_task): Likewise.
 593         (bppy_set_ignore_count): Likewise.
 594         (bppy_set_hit_count): Likewise.
 595         * python/py-block.c (blpy_get_start): Use
 596         gdb_py_object_from_ulongest.
 597         (blpy_get_end): Likewise.
 598         (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG.
 599
 600 2011-01-25  Mathieu Lacage  <mathieu.lacage@inria.fr>
 601
 602         PR/symtab 11766:
 603         * gdb/objfiles.h (struct objfile) <addr_low>: New field.
 604         * gdb/solib.c (solib_read_symbols): Check for addr_low in
 605         equality test for objfile, initialize addr_low if needed.
 606
 607 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
 608
 609         * tui/tui-regs.c (tui_register_format): Remove dead code.
 610
 611 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
 612
 613         * printcmd.c (print_formatted): Use val_print_scalar_formatted
 614         instead of print_scalar_formatted.
 615         (print_scalar_formatted): Don't handle 's' format strings here,
 616         and add an assertion that we never see such format here.
 617         * valprint.h (val_print_scalar_formatted): Declare.
 618         * valprint.c (val_print_scalar_formatted): New.
 619         * c-valprint.c (c_val_print): Use val_print_scalar_formatted
 620         instead of print_scalar_formatted.
 621         * jv-valprint.c (java_val_print): Ditto.
 622         * p-valprint.c (pascal_val_print): Ditto.
 623         * ada-valprint.c (ada_val_print_1): Ditto.
 624         * f-valprint.c (f_val_print): Ditto.
 625         * infcmd.c (registers_info): Ditto.
 626         * m2-valprint.c (m2_val_print): Ditto.
 627
 628 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
 629
 630         * m2-valprint.c (print_unbounded_array): Pass
 631         value_contents_for_printing rather than value_contents, to
 632         m2_print_array_contents.  Also pass in the value.
 633
 634 2011-01-25  Jan Kratochvil  <jan.kratochvil@redhat.com>
 635
 636         * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
 637         (save_gdb_index_command): Switch to .gdb_index version 4.
 638
 639 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
 640
 641         * mi/mi-main.c (get_register): Use get_frame_register_value rather
 642         than frame_register, and always pass a valid value to val_print.
 643
 644 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
 645
 646         Centralize printing "<optimized out>".
 647
 648         * valprint.h (val_print_optimized_out): Declare.
 649         * cp-valprint.c (cp_print_value_fields): Use
 650         val_print_optimized_out.
 651         * jv-valprint.c (java_print_value_fields): Ditto.
 652         * p-valprint.c (pascal_object_print_value_fields): Ditto.
 653         * printcmd.c (print_formatted): Ditto.
 654         * valprint.c (valprint_check_validity): Ditto.
 655         (value_check_printable): Ditto.
 656         (val_print_optimized_out): New.
 657
 658 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
 659
 660         * infcmd.c (default_print_registers_info): Allocate values so to
 661         never pass a NULL value to val_print.
 662
 663 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
 664
 665         * cp-valprint.c (cp_print_value): Treat the 'skip' local as
 666         boolean.  Make sure to always pass a value that matches the
 667         contents buffer to callees.  Preserve `address' for following
 668         iterations.
 669         * value.c (value_contents_for_printing_const): New.
 670         (value_address): Constify value argument.
 671         * value.h (value_contents_for_printing_const): Declare.
 672         (value_address): Constify value argument.
 673
 674 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
 675
 676         * regcache.c (struct regcache_descr): Rename
 677         sizeof_raw_register_valid_p field to sizeof_raw_register_status,
 678         and sizeof_cooked_register_valid_p to
 679         sizeof_cooked_register_status.
 680         (init_regcache_descr): Adjust.
 681         (struct regcache): Rename register_valid_p field to
 682         register_status.
 683         (regcache_xmalloc_1, regcache_xfree, regcache_save)
 684         (do_cooked_read): Adjust.
 685         (regcache_valid_p): Rename to ...
 686         (regcache_register_status): ... this.  Adjust.
 687         (regcache_invalidate): Adjust.
 688         (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
 689         Adjust.
 690         (regcache_raw_supply): Adjust.  If buf i NULL, mark the register
 691         as unavailable, not valid.
 692         (regcache_dump): Adjust.
 693         * regcache.h (enum register_status): New.
 694         (regcache_register_status): Declare.
 695         (regcache_invalidate): Delete declaration.
 696         * corelow.c (get_core_registers): Adjust.
 697         * tracepoint.c (tfile_fetch_registers): Adjust.
 698         * trad-frame.c (REG_VALUE): Rename to ...
 699         (TF_REG_VALUE): ... this.
 700         (REG_UNKNOWN): Rename to ...
 701         (TF_REG_UNKNOWN): ... this.
 702         (trad_frame_set_value, trad_frame_set_unknown): Adjust.
 703         * mi/mi-main.c (register_changed_p): Adjust.
 704
 705 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
 706
 707         * regcache.c (struct regcache_descr): Remove outdated comment.
 708         (init_regcache_descr): Remove sizeof_raw_register_valid_p
 709         overallocate hack.
 710         (regcache_xmalloc): Rename to ...
 711         (regcache_xmalloc_1): ... this.  Add `readonly_p' parameter.
 712         Allocate the regcache type accordingly.
 713         (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
 714         (regcache_xfree): Asser the source is also readonly.  Copy sizeof
 715         cooked registers, not raw.
 716         (regcache_dup_no_passthrough): Delete.
 717         (get_thread_arch_regcache): Use regcache_xmalloc_1.
 718         * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
 719         mention obsolete write_register_bytes.
 720         * regcache.h (regcache_dup_no_passthrough): Delete declaration.
 721
 722 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
 723
 724         Stop remote_read_bytes from handling partial reads itself.
 725
 726         * remote-fileio.c: Include target.h.
 727         (remote_fileio_write_bytes): Delete.
 728         (remote_fileio_func_open, remote_fileio_func_write)
 729         (remote_fileio_func_rename, remote_fileio_func_unlink): Use
 730         target_read_memory.
 731         (remote_fileio_func_stat): Use target_read_memory and
 732         target_write_memory.
 733         (remote_fileio_func_gettimeofday): Use target_write_memory.
 734         (remote_fileio_func_system): Use target_read_memory.
 735         * remote.c (remote_write_bytes): Make it static.
 736         (remote_read_bytes): Don't handle partial reads here.
 737         * remote.h (remote_read_bytes): Delete declaration.
 738
 739 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
 740
 741         Simplify XML parsing a bit.
 742
 743         * xml-support.h (gdb_xml_parse_quick): Declare.
 744         * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
 745         from gdb_xml_create_parser_and_cleanup, and added `old_chain'
 746         parameter.
 747         (gdb_xml_create_parser_and_cleanup): Reimplement on top of
 748         gdb_xml_create_parser_and_cleanup_1.
 749         (gdb_xml_parse_quick): New.
 750         * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
 751         * osdata.c (osdata_parse): Ditto.
 752         * remote.c (remote_threads_info): Ditto.
 753         * solib-target.c (solib_target_parse_libraries): Ditto.
 754         * xml-syscall.c (syscall_parse_xml): Ditto.
 755         * xml-tdesc.c (tdesc_parse_xml): Ditto.
 756
 757 2011-01-24  Kevin Buettner  <kevinb@redhat.com>
 758
 759         * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
 760         with remote-mips.o added to gdb_target_obs.
 761         * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
 762
 763 2011-01-24  Pedro Alves  <pedro@codesourcery.com>
 764
 765         * ada-valprint.c (val_print_packed_array_elements): Pass the
 766         correct struct value to val_print.
 767         (ada_val_print_1): Ditto.
 768
 769 2011-01-24  Pedro Alves  <pedro@codesourcery.com>
 770
 771         Don't lose embedded_offset in printing routines throughout.
 772
 773         * valprint.h (val_print_array_elements): Change prototype.
 774         * valprint.c (val_print_array_elements): Add `embedded_offset'
 775         parameter, and adjust to pass it down to val_print, while passing
 776         `valaddr' or `address' unmodified.  Take embedded_offset into
 777         account when checking repetitions.
 778         * c-valprint.c (c_val_print): Pass embedded_offset to
 779         val_print_array_elements instead of adjusting `valaddr' and
 780         `address'.
 781         * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
 782         embedded_offset to val_print_array_elements instead of adjusting
 783         `valaddr'.
 784         * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
 785         * p-valprint.c (pascal_val_print): Pass embedded_offset to
 786         val_print_array_elements and pascal_object_print_value_fields
 787         instead of adjusting `valaddr'.
 788         (pascal_object_print_value_fields): Add `offset' parameter, and
 789         adjust to use it.
 790         (pascal_object_print_value): Add `offset' parameter, and adjust to
 791         use it.
 792         (pascal_object_print_static_field): Use
 793         value_contents_for_printing/value_embedded_offset, rather than
 794         value_contents.
 795         * ada-valprint.c (val_print_packed_array_elements): Add `offset'
 796         parameter, and adjust to use it.  Use
 797         value_contents_for_printing/value_embedded_offset, rather than
 798         value_contents.
 799         (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
 800         (ada_val_print_array): Add `offset' parameter, and adjust to use
 801         it.
 802         (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
 803         `embedded_offset' to `offset'.  Don't re-adjust `valaddr'.
 804         Instead work with offsets.  Use
 805         value_contents_for_printing/value_embedded_offset, rather than
 806         value_contents.  Change `defer_val_int' local type to CORE_ADDR,
 807         and use value_from_pointer to extract a target pointer, rather
 808         than value_from_longest.
 809         (print_variant_part): Add `offset' parameter.  Replace
 810         `outer_valaddr' parameter by a new `outer_offset' parameter.
 811         Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
 812         (ada_value_print): Use
 813         value_contents_for_printing/value_embedded_offset, rather than
 814         value_contents.
 815         (print_record): Add `offset' parameter, and adjust to pass it
 816         down.
 817         (print_field_values): Add `offset' parameter.  Replace
 818         `outer_valaddr' parameter by a new `outer_offset' parameter.
 819         Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
 820         Use value_contents_for_printing/value_embedded_offset, rather than
 821         value_contents.
 822         * d-valprint.c (dynamic_array_type): Use
 823         value_contents_for_printing/value_embedded_offset, rather than
 824         value_contents.
 825         * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
 826         Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
 827         (java_print_value_fields): Take `offset' into account.  Don't
 828         re-adjust `valaddr'.  Instead pass down adjusted offsets.
 829         (java_val_print): Take `embedded_offset' into account.  Pass it to
 830         java_print_value_fields.
 831         * f-valprint.c (f77_print_array_1): Add `embedded_offset'
 832         parameter.  Don't re-adjust `valaddr' or `address'.  Instead pass
 833         down adjusted offsets.
 834         (f77_print_array): Add `embedded_offset' parameter.  Pass it down.
 835         (f_val_print): Take `embedded_offset' into account.
 836
 837 2011-01-21  Joel Brobecker  <brobecker@adacore.com>
 838
 839         * inflow.c: Include "gdbcmd.h".
 840         (interactive_mode): New static global, moved here from top.c.
 841         (show_interactive_mode): New function, moved here from top.c.
 842         use gdb_has_a_terminal instead of input_from_terminal_p to
 843         determine the current mode.
 844         (gdb_has_a_terminal): Add handling of the "iteractive-mode"
 845         setting.
 846         (_initialize_inflow): Add the "set/show interactive-mode"
 847         commands.  Moved here from top.c, after having adjusted slightly
 848         the help text.
 849         * top.c (interactive_mode, show_interactive_mode): Delete, moved
 850         to inflow.c.
 851         (input_from_terminal_p): Remove handling of "interactive-mode"
 852         setting, moved to infow.c.
 853         (init_main): Remove creation of the "set/show interactive-mode"
 854         commands, moved to inflow.c.
 855
 856 2011-01-19  Joel Brobecker  <brobecker@adacore.com>
 857
 858         * NEWS: Add entry for native ia64-hpux support.
 859
 860 2011-01-19  Tom Tromey  <tromey@redhat.com>
 861
 862         PR mi/8618:
 863         * thread.c (free_thread): Free 'name'.
 864         (print_thread_info): Emit thread name.  Change CLI output.
 865         (thread_name_command): New function.
 866         (do_captured_thread_select): Emit newline.
 867         (_initialize_thread): Register 'thread name' command.
 868         * target.h (struct target_ops) <to_thread_name>: New field.
 869         (target_thread_name): New macro.
 870         * target.c (update_current_target): Handle to_thread_name.
 871         * python/py-infthread.c (thpy_get_name): New function.
 872         (thpy_set_name): Likewise.
 873         (thread_object_getset): Add "name".
 874         * linux-nat.c (linux_nat_thread_name): New function.
 875         (linux_nat_add_target): Set to_thread_name.
 876         * gdbthread.h (struct thread_info) <name>: New field.
 877
 878 2011-01-18  Joel Brobecker  <brobecker@adacore.com>
 879
 880         * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
 881         (ada_val_print_1): Likewise.
 882
 883 2011-01-18  Joel Brobecker  <brobecker@adacore.com>
 884
 885         * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
 886         upper limit address is not greater than the function end address
 887         when the upper limit could not be computed using the debugging
 888         info.
 889
 890 2011-01-17  Tom Tromey  <tromey@redhat.com>
 891
 892         * cli/cli-cmds.c (apropos_command): Free the compiled regex.  Use
 893         get_regcomp_error.
 894         * utils.c: Include gdb_regex.h.
 895         (do_regfree_cleanup): New function.
 896         (make_regfree_cleanup): Likewise.
 897         (get_regcomp_error): Likewise.
 898         * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
 899
 900 2011-01-17  Tom Tromey  <tromey@redhat.com>
 901
 902         * cli/cli-cmds.c (apropos_command): Fix formatting.  Don't call
 903         re_compile_fastmap.
 904
 905 2011-01-17  Pierre Muller  <muller@ics.u-strasbg.fr>
 906
 907         * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
 908         for internal variables.
 909         (last_was_structop): New static variable.
 910         (COMPLETE): New token.
 911         (field_exp): New rule to group all '.' suffix handling.
 912         Add mark_struct_expression calls when approriate to be able
 913         to correctly find fields for completion.
 914         (yylex): Adapt to handle field completion and set INTVAR when
 915         required.
 916
 917 2011-01-14  Yao Qi  <yao@codesourcery.com>
 918
 919         * arm-tdep.c (arm_register_reggroup_p): FPS register is in
 920         save_reggroup, restore_reggroup and all_reggroup.
 921
 922 2011-01-14  Joel Brobecker  <brobecker@adacore.com>
 923
 924         * ada-valprint. (ada_printchar): Use the correct type length
 925         in call to ada_emit_char.
 926         * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
 927
 928 2011-01-14  Pierre Muller  <muller@ics.u-strasbg.fr>
 929
 930         * solib-som.h (hpux_major_release): Declare variable here.
 931         * solib-som.c:  Remove <sys/utsname.h> header.
 932         (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
 933         (hpux_major_release): Make global, change default value to
 934         DEFAULT_HPUX_MAJOR_RELEASE.
 935         (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
 936         * hppa-hpux-nat.c: Add <sys/utsname.h> include.
 937         Add "solib-som.h" header.
 938         (set_hpux_major_release): New function.
 939         (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
 940
 941 2011-01-14  Mike Frysinger  <vapier@gentoo.org>
 942
 943         * configure.tgt (*-*-uclinux*): Match more Linux os targets
 944
 945 2011-01-14  Joel Brobecker  <brobecker@adacore.com>
 946
 947         * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
 948         new-line at end of warning message.
 949         (ia64_hpux_store_register): Remove trailing new-line at end of
 950         error message.
 951         * ia64-hpux-tdep.c: Rephrase comment.
 952         * solib-ia64-hpux.c (struct dld_info): Change type of field
 953         dld_flags from "long long" to ULONGEST.
 954
 955 2011-01-14  Pedro Alves  <pedro@codesourcery.com>
 956
 957         * target.h (deprecated_child_ops): Delete declaration.
 958         * target.c (deprecated_child_ops): Delete definition.
 959
 960 2011-01-14  Pedro Alves  <pedro@codesourcery.com>
 961
 962         * Makefile.in (hpux-thread.o): Delete rule.
 963         * configure.ac: Don't check for HPUX DCE threads support.
 964         * configure, config.in: Regenerate.
 965         * hppa-hpux-nat.c (child_suppress_run): Delete.
 966         (hppa_hpux_child_can_run): Delete.
 967         (_initialize_hppa_hpux_nat): Don't override to_can_run.
 968         * hpux-thread.c: Delete.
 969
 970 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 971
 972         * hpux-thread.c (hpux_pid_to_str): Delete.
 973
 974 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 975
 976         * ada-valprint.c (ada_emit_char): Remove strange code.
 977         Check that c is <= UCHAR_MAX before passing it to isascii.
 978         (char_at): Do not assume that TYPE_LEN is either 1 or 2.
 979
 980 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 981
 982         * top.c (input_from_terminal_p): Restrict the use of interactive_mode
 983         to the case where instream is stdin.
 984
 985 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 986
 987         * ia64-tdep.h (struct regcache): Forward declare.
 988         (struct ia64_infcall_ops): New struct type.
 989         (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
 990         and "infcall_ops".
 991         * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
 992         Renames ia64_find_global_pointer.
 993         (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
 994         (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
 995         (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
 996         methods.
 997         (ia64_infcall_ops): New static global constant.
 998         (ia64_gdbarch_init): Set tdep->infcall_ops.
 999         * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
1000         (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
1001         * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
1002         (ia64_hpux_dummy_code): New static global constant.
1003         (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
1004         (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
1005         (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
1006         New function.
1007         (ia64_hpux_infcall_ops): New static global constant.
1008         (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
1009         for inferior function calls to work properly on ia64-hpux.
1010
1011 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
1012
1013         * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
1014         * ia64-tdep.h (struct frame_info): forward declaration.
1015         (struct gdbarch_tdep): Add field size_of_register_frame.
1016         * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
1017         to determine the size of the register frame.
1018         (ia64_size_of_register_frame): New function.
1019         (ia64_gdbarch_init): Set tdep->size_of_register_frame.
1020         * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
1021         (IA64_HPUX_UREG_REASON): New macro.
1022         (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
1023         New functions.
1024         (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
1025         * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
1026         (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
1027         objects.
1028
1029 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
1030
1031         Add support for ia64-hpux.
1032         * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
1033         ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
1034
1035         * configure.host: Add handling for ia64-hpux hosts.  Add associated
1036         floatformats.
1037         * configure.tgt: Add handling for ia64-hpux targets.
1038         * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
1039         (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
1040         (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
1041
1042 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
1043
1044         [ttrace] Compute thread list immediately after attach.
1045         * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
1046         New subprogram.
1047         (inf_ttrace_attach): Use it.
1048
1049 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
1050
1051         * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
1052         if we could not determine the frame's function address.  Instead,
1053         use the frame's PC, and then continue.
1054
1055 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
1056
1057         * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
1058         not already defined.
1059
1060 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
1061
1062         * ia64-tdep.c (ia64_struct_type_p): New function.
1063         (ia64_extract_return_value): Handle integral values that are
1064         less than 8 bytes long.
1065         (ia64_push_dummy_call): Likewise.
1066
1067 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
1068
1069         * ia64-tdep.c (floatformat_ia64_ext_little): Renames
1070         floatformat_ia64_ext.
1071         (floatformat_ia64_ext_big): New static const.
1072         (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
1073
1074 2011-01-12  Tom Tromey  <tromey@redhat.com>
1075
1076         * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
1077         messages.
1078         * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
1079         (mi_cmd_thread_list_ids): Likewise.
1080         (mi_cmd_data_list_changed_registers): Likewise.
1081         (mi_cmd_data_list_register_values): Likewise.
1082         (mi_cmd_data_write_register_values): Likewise.
1083         (mi_cmd_data_evaluate_expression): Likewise.
1084         (mi_cmd_data_read_memory): Likewise.
1085         (mi_cmd_data_read_memory_bytes): Likewise.
1086         (mi_cmd_data_write_memory): Likewise.
1087         (mi_cmd_enable_timings): Likewise.
1088         * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
1089         * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
1090         (mi_cmd_var_delete): Likewise.
1091         (mi_cmd_var_set_format): Likewise.
1092         (mi_cmd_var_show_format): Likewise.
1093         (mi_cmd_var_info_num_children): Likewise.
1094         (mi_cmd_var_list_children): Likewise.
1095         (mi_cmd_var_info_type): Likewise.
1096         (mi_cmd_var_info_expression): Likewise.
1097         (mi_cmd_var_show_attributes): Likewise.
1098         (mi_cmd_var_assign): Likewise.
1099         (mi_cmd_var_update): Likewise.
1100         (mi_cmd_enable_pretty_printing): Likewise.
1101         (mi_cmd_var_set_update_range): Likewise.
1102         * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
1103         messages.
1104         (mi_cmd_target_file_put): Likewise.
1105         (mi_cmd_target_file_delete): Likewise.
1106         * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
1107         messages.
1108         (mi_cmd_stack_info_depth): Likewise.
1109         (mi_cmd_stack_list_locals): Likewise.
1110         (mi_cmd_stack_list_args): Likewise.
1111         (mi_cmd_stack_select_frame): Likewise.
1112         (mi_cmd_stack_select_frame): Likewise.
1113         (mi_cmd_stack_info_frame): Likewise.
1114         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
1115         messages.
1116         (mi_cmd_file_list_exec_source_files): Likewise.
1117         * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
1118         (mi_cmd_env_cd): Likewise.
1119         (mi_cmd_env_path): Likewise.
1120         (mi_cmd_env_dir): Likewise.
1121         (mi_cmd_inferior_tty_show): Likewise.
1122         * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
1123         * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
1124         (mi_cmd_break_watch): Likewise.
1125
1126 2011-01-12  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1127
1128         * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
1129         (ppc_linux_insert_hw_breakpoint): Likewise.
1130         (ppc_linux_remove_hw_breakpoint): Likewise.
1131         (ppc_linux_insert_watchpoint): Likewise.
1132
1133 2011-01-12  Andrew Burgess  <aburgess@broadcom.com>
1134             Jan Kratochvil  <jan.kratochvil@redhat.com>
1135
1136         PR fortran/11104 and DWARF unbound arrays detection.
1137         * dwarf2read.c (read_subrange_type): Set zero length on unspecified
1138         upper bound.  Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
1139         unspecified upper bound.
1140         * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
1141         variables array_size_array, tmp_type and offset_item.  New variable
1142         array.  Remove call to f77_get_upperbound.  New variables array_type
1143         and index.  Call value_subscripted_rvalue for each dimenasion.  Remove
1144         the final call to deprecated_set_value_type.
1145
1146 2011-01-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
1147
1148         Make value allocations more lazy.
1149         * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
1150         instead of allocate_value and set_value_lazy when possible.
1151         * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
1152         instead of allocate_value and set_value_lazy.
1153         * findvar.c (value_of_register_lazy): Likewise.
1154         (read_var_value): Remove V preallocation, call just check_typedef in
1155         advance.  Move allocate_value to LOC_CONST, LOC_LABEL,
1156         LOC_CONST_BYTES.  Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
1157         LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK.  Set ADDR instead of
1158         set_value_address and break in LOC_BLOCK.  Use allocate_value_lazy and
1159         remove lval_memory set in LOC_REGPARM_ADDR.  Use allocate_value_lazy
1160         in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT.  Add setting lval_memory at
1161         the end, remove set_value_lazy there.
1162         * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
1163         instead of allocate_value and set_value_lazy when possible.
1164         * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
1165         * value.c (allocate_computed_value): Use allocate_value_lazy instead
1166         of allocate_value and set_value_lazy.
1167         (value_from_contents_and_address): Use allocate_value_lazy instead of
1168         allocate_value and set_value_lazy when possible.
1169
1170 2011-01-12  Andrew Burgess  <aburgess@broadcom.com>
1171
1172         * disasm.c (dump_insns): Support dumping opcodes for MI.
1173         * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
1174         dumping of instruction opcodes.
1175
1176 2011-01-09  Robert Millan  <rmh@gnu.org>  (tiny patch)
1177
1178         * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
1179         appropiately.
1180
1181 2011-01-11  Tom Tromey  <tromey@redhat.com>
1182
1183         * thread.c (do_captured_thread_select): Emit newline before
1184         printing frame.
1185
1186 2011-01-11  Michael Snyder  <msnyder@vmware.com>
1187
1188         * s390-tdep.c: Comment cleanup, mostly periods and spaces.
1189         * score-tdep.c: Ditto.
1190         * score-tdep.h: Ditto.
1191         * ser-base.c: Ditto.
1192         * ser-go32.c: Ditto.
1193         * serial.c: Ditto.
1194         * serial.h: Ditto.
1195         * ser-mingw.c: Ditto.
1196         * ser-pipe.c: Ditto.
1197         * ser-tcp.c: Ditto.
1198         * ser-unix.c: Ditto.
1199         * sh64-tdep.c: Ditto.
1200         * shnbsd-nat.c: Ditto.
1201         * sh-tdep.c: Ditto.
1202         * sh-tdep.h: Ditto.
1203         * solib.c: Ditto.
1204         * solib-darwin.c: Ditto.
1205         * solib-frv.c: Ditto.
1206         * solib.h: Ditto.
1207         * solib-irix.c: Ditto.
1208         * solib-osf.c: Ditto.
1209         * solib-pa64.c: Ditto.
1210         * solib-som.c: Ditto.
1211         * solib-spu.c: Ditto.
1212         * solib-sunos.c: Ditto.
1213         * solib-svr4.c: Ditto.
1214         * solist.h: Ditto.
1215         * sol-thread.c: Ditto.
1216         * somread.c: Ditto.
1217         * source.c: Ditto.
1218         * source.h: Ditto.
1219         * sparc64-linux-tdep.c: Ditto.
1220         * sparc64-tdep.c: Ditto.
1221         * sparc-linux-nat.c: Ditto.
1222         * sparc-linux-tdep.c: Ditto.
1223         * sparc-sol2-nat.c: Ditto.
1224         * sparc-sol2-tdep.c: Ditto.
1225         * sparc-tdep.c: Ditto.
1226         * sparc-tdep.h: Ditto.
1227         * spu-tdep.c: Ditto.
1228         * stabsread.c: Ditto.
1229         * stabsread.h: Ditto.
1230         * stack.c: Ditto.
1231         * symfile.c: Ditto.
1232         * symfile.h: Ditto.
1233         * symmisc.c: Ditto.
1234         * symtab.c: Ditto.
1235         * symtab.h: Ditto.
1236         * target.c: Ditto.
1237         * target-descriptions.c: Ditto.
1238         * target-descriptions.h: Ditto.
1239         * target.h: Ditto.
1240         * target-memory.c: Ditto.
1241         * terminal.h: Ditto.
1242         * thread.c: Ditto.
1243         * top.c: Ditto.
1244         * tracepoint.c: Ditto.
1245         * tracepoint.h: Ditto.
1246         * trad-frame.h: Ditto.
1247         * typeprint.c: Ditto.
1248
1249 2011-01-11  Michael Snyder  <msnyder@vmware.com>
1250
1251         * ui-file.c: Comment cleanup, mostly periods and spaces.
1252         * ui-file.h: Ditto.
1253         * ui-out.c: Ditto.
1254         * ui-out.h: Ditto.
1255         * utils.c: Ditto.
1256         * v850-tdep.c: Ditto.
1257         * valarith.c: Ditto.
1258         * valops.c: Ditto.
1259         * valprint.c: Ditto.
1260         * valprint.h: Ditto.
1261         * value.c: Ditto.
1262         * value.h: Ditto.
1263         * varobj.c: Ditto.
1264         * varobj.h: Ditto.
1265         * vax-tdep.c: Ditto.
1266         * vec.c: Ditto.
1267         * vec.h: Ditto.
1268         * version.h: Ditto.
1269         * windows-nat.c: Ditto.
1270         * windows-tdep.c: Ditto.
1271         * xcoffread.c: Ditto.
1272         * xcoffsolib.c: Ditto.
1273         * xml-support.c: Ditto.
1274         * xstormy16-tdep.c: Ditto.
1275         * xtensa-tdep.c: Ditto.
1276         * xtensa-tdep.h: Ditto.
1277
1278 2011-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1279
1280         * breakpoint.c (resources_needed_watchpoint): Fix indentation.
1281         * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
1282
1283 2011-01-11  Sergio Durigan Junior  <sergiodj@linux.vnet.ibm.com>
1284             Thiago Jung Bauermann  <bauerman@br.ibm.com>
1285
1286         Implement support for PowerPC BookE ranged watchpoints.
1287         * breakpoint.h
1288         (struct breakpoint_ops) <resources_needed>: New method.
1289         Initialize to NULL in all existing breakpoint_ops instances.
1290         (struct breakpoint) <exact>: New field.
1291         (target_exact_watchpoints): Declare external global.
1292         * breakpoint.c (target_exact_watchpoints): New global flag.
1293         (update_watchpoint): Set b->type to bp_hardware_watchpoint and
1294         b->enable_state to bp_enabled before calling
1295         hw_watchpoint_used_count.
1296         (hw_watchpoint_used_count): Iterate over all bp_locations in a
1297         watchpoint.  Call breakpoint's breakpoint_ops.resources_needed
1298         if available.
1299         (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
1300         if the watchpoint is exact.
1301         (resources_needed_watchpoint): New function.
1302         (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
1303         (watch_command_1): Set b->exact if the user asked for an exact
1304         watchpoint and one can be set.
1305         (can_use_hardware_watchpoint): Add exact_watchpoints argument.
1306         Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
1307         the user asks for an exact watchpoint and one can be set.  Return
1308         number of needed debug registers to watch the expression.
1309         * gdbtypes.c (is_scalar_type): New function, based on
1310         valprint.c:scalar_type_p.
1311         (is_scalar_type_recursive): New function.
1312         * gdbtypes.h (is_scalar_type_recursive): Declare.
1313         * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
1314         handle regions when ranged watchpoints are available.
1315         (create_watchpoint_request): New function.
1316         (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
1317         create_watchpoint_request.
1318         * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
1319         (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
1320         `set powerpc' and `show powerpc' commands.
1321         * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
1322         Mention documentation comment in the target macro.
1323         (target_region_ok_for_hw_watchpoint): Document return value.
1324
1325 2011-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1326
1327         * breakpoint.c (update_watchpoint): Decide on using a software or
1328         hardware watchpoint after the bp_locations are created.
1329
1330 2010-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1331
1332         Convert hardware watchpoints to use breakpoint_ops.
1333         * breakpoint.h (breakpoint_ops) <insert>: Rename to...
1334         <insert_location>: ... this.  Return int instead of void.
1335         Accept pointer to struct bp_location instead of pointer to
1336         struct breakpoint.  Adapt all implementations.
1337         (breakpoint_ops) <remove>: Rename to...
1338         <remove_location>: ... this.  Accept pointer to struct bp_location
1339         instead of pointer to struct breakpoint.  Adapt all implementations.
1340         * breakpoint.c (insert_catchpoint): Delete function.
1341         (insert_bp_location): Call the watchpoint or catchpoint's
1342         breakpoint_ops.insert method.
1343         (remove_breakpoint_1): Call the watchpoint or catchpoint's
1344         breakpoint_ops.remove method.
1345         (insert_watchpoint, remove_watchpoint): New functions.
1346         (watchpoint_breakpoint_ops): New structure.
1347         (watch_command_1): Initialize the OPS field.
1348         * inf-child.c (inf_child_insert_fork_catchpoint)
1349         (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
1350         (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
1351         (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
1352         Delete functions.
1353         (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
1354         to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
1355         to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
1356         to_remove_exec_catchpoint and to_set_syscall_catchpoint.
1357         * target.c (update_current_target): Change default implementation of
1358         to_insert_fork_catchpoint, to_remove_fork_catchpoint,
1359         to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
1360         to_insert_exec_catchpoint, to_remove_exec_catchpoint and
1361         to_set_syscall_catchpoint to return_one.
1362         (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
1363         (debug_to_insert_exec_catchpoint): Report return value.
1364         * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
1365         (to_insert_exec_catchpoint): Change declaration to return int instead
1366         of void.
1367
1368 2011-01-11  Michael Snyder  <msnyder@vmware.com>
1369
1370         * arm-tdep.c: Internationalization.
1371         * c-lang.c: Ditto.
1372         * charset.c: Ditto.
1373         * fork-child.c: Ditto.
1374         * nto-procfs.c: Ditto.
1375         * ppc-sysv-tdep.c: Ditto.
1376         * procfs.c: Ditto.
1377         * remote-mips.c: Ditto.
1378         * remote.c: Ditto.
1379         * rs6000-nat.c: Ditto.
1380         * rs6000-tdep.c: Ditto.
1381         * target.c: Ditto.
1382         * valops.c: Ditto.
1383         * value.c: Ditto.
1384         * xml-support.c: Ditto.
1385         * mi/mi-cmd-break.c: Ditto.
1386         * mi/mi-cmd-var.c: Ditto.
1387         * mi/mi-interp.c: Ditto.
1388         * mi/mi-main.c: Ditto.
1389
1390 2011-01-11  Andrew Burgess  <aburgess@broadcom.com>
1391
1392         * remote-sim.c (gdbsim_store_register): Update API to
1393         sim_store_register to check more error conditions.
1394
1395 2011-01-10  Michael Snyder  <msnyder@vmware.com>
1396
1397         * nto-procfs.c: Comment cleanup, mostly periods and spaces.
1398         * nto-tdep.c: Ditto.
1399         * nto-tdep.h: Ditto.
1400         * objc-exp.y: Ditto.
1401         * objc-lang.c: Ditto.
1402         * objfiles.c: Ditto.
1403         * objfiles.h: Ditto.
1404         * observer.c: Ditto.
1405         * opencl-lang.c: Ditto.
1406         * osabi.c: Ditto.
1407         * parse.c: Ditto.
1408         * parser-defs.h: Ditto.
1409         * p-exp.y: Ditto.
1410         * p-lang.c: Ditto.
1411         * posix-hdep.c: Ditto.
1412         * ppcbug-rom.c: Ditto.
1413         * ppc-linux-nat.c: Ditto.
1414         * ppc-linux-tdep.c: Ditto.
1415         * ppc-linux-tdep.h: Ditto.
1416         * ppcnbsd-tdep.c: Ditto.
1417         * ppcobsd-tdep.c: Ditto.
1418         * ppcobsd-tdep.h: Ditto.
1419         * ppc-sysv-tdep.c: Ditto.
1420         * ppc-tdep.h: Ditto.
1421         * printcmd.c: Ditto.
1422         * proc-abi.c: Ditto.
1423         * proc-flags.c: Ditto.
1424         * procfs.c: Ditto.
1425         * proc-utils.h: Ditto.
1426         * progspace.h: Ditto.
1427         * prologue-value.c: Ditto.
1428         * prologue-value.h: Ditto.
1429         * psympriv.h: Ditto.
1430         * psymtab.c: Ditto.
1431         * p-typeprint.c: Ditto.
1432         * p-valprint.c: Ditto.
1433         * ravenscar-sparc-thread.c: Ditto.
1434         * ravenscar-thread.c: Ditto.
1435         * ravenscar-thread.h: Ditto.
1436         * record.c: Ditto.
1437         * regcache.c: Ditto.
1438         * regcache.h: Ditto.
1439         * remote.c: Ditto.
1440         * remote-fileio.c: Ditto.
1441         * remote-fileio.h: Ditto.
1442         * remote.h: Ditto.
1443         * remote-m32r-sdi.c: Ditto.
1444         * remote-mips.c: Ditto.
1445         * remote-sim.c: Ditto.
1446         * rs6000-aix-tdep.c: Ditto.
1447         * rs6000-nat.c: Ditto.
1448         * rs6000-tdep.c: Ditto.
1449
1450 2011-01-10  Michael Snyder  <msnyder@vmware.com>
1451
1452         * charset.c (validate): Internationalization.
1453         * coffread.c (read_one_sym): Ditto.
1454         * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
1455         * h8300-tdep.c (H8300_extract_return_value): Ditto.
1456         * inflow.c (new_tty): Ditto.
1457         * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
1458         * m32c-tdep.c (m32c_return_value): Ditto.
1459         * mep-tdep.c (mep_store_return_value): Ditto.
1460         * score-tdep.c (score7_fetch_insn): Ditto.
1461         * ser-mingw.c (pipe_windows_open): Ditto.
1462         * sh64-tdep.c (sh64_extract_return_value): Ditto.
1463         * spu-tdep.c (spu_register_type): Ditto.
1464         * tracepoint.c (trace_find_command): Ditto.
1465         * valarith.c (value_pos): Ditto.
1466
1467 2011-01-10  Joel Brobecker  <brobecker@adacore.com>
1468
1469         * ada-valprint.c (printstr): Minor comment reformatting.
1470
1471 2011-01-08  Michael Snyder  <msnyder@vmware.com>
1472
1473         * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
1474         markup.
1475
1476 2011-01-08  Michael Snyder  <msnyder@vmware.com>
1477
1478         * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
1479         * hppa-hpux-tdep.c: Ditto.
1480         * hppa-linux-nat.c: Ditto.
1481         * hppa-linux-tdep.c: Ditto.
1482         * hppanbsd-tdep.c: Ditto.
1483         * hppa-tdep.c: Ditto.
1484         * hppa-tdep.h: Ditto.
1485         * hpux-thread.c: Ditto.
1486         * i386-cygwin-tdep.c: Ditto.
1487         * i386-darwin-nat.c: Ditto.
1488         * i386gnu-nat.c: Ditto.
1489         * i386-linux-nat.c: Ditto.
1490         * i386-linux-tdep.c: Ditto.
1491         * i386-nat.c: Ditto.
1492         * i386-nat.h: Ditto.
1493         * i386nbsd-tdep.c: Ditto.
1494         * i386-sol2-nat.c: Ditto.
1495         * i386-stub.c: Ditto.
1496         * i386-tdep.c: Ditto.
1497         * i386-tdep.h: Ditto.
1498         * i387-tdep.c: Ditto.
1499         * ia64-linux-nat.c: Ditto.
1500         * ia64-linux-tdep.c: Ditto.
1501         * ia64-tdep.c: Ditto.
1502         * infcall.c: Ditto.
1503         * infcall.h: Ditto.
1504         * infcmd.c: Ditto.
1505         * inferior.c: Ditto.
1506         * inferior.h: Ditto.
1507         * infloop.c: Ditto.
1508         * inflow.c: Ditto.
1509         * infrun.c: Ditto.
1510         * interps.c: Ditto.
1511         * interps.h: Ditto.
1512         * iq2000-tdep.c: Ditto.
1513         * irix5-nat.c: Ditto.
1514         * jit.c: Ditto.
1515         * jit.h: Ditto.
1516         * jv-exp.y: Ditto.
1517         * jv-lang.c: Ditto.
1518         * jv-lang.h: Ditto.
1519         * jv-typeprint.c: Ditto.
1520         * jv-valprint.c: Ditto.
1521         * language.c: Ditto.
1522         * language.h: Ditto.
1523         * linespec.c: Ditto.
1524         * linux-fork.c: Ditto.
1525         * linux-nat.c: Ditto.
1526         * linux-thread-db.c: Ditto.
1527         * lm32-tdep.c: Ditto.
1528
1529 2011-01-08  Michael Snyder  <msnyder@vmware.com>
1530
1531         * m2-exp.y: Comment cleanup, mostly periods and spaces.
1532         * m2-lang.c: Ditto.
1533         * m2-typeprint.c: Ditto.
1534         * m2-valprint.c: Ditto.
1535         * m32c-tdep.c: Ditto.
1536         * m32r-linux-nat.c: Ditto.
1537         * m32r-rom.c: Ditto.
1538         * m32r-tdep.c: Ditto.
1539         * m32r-tdep.h: Ditto.
1540         * m68hc11-tdep.c: Ditto.
1541         * m58klinux-nat.c: Ditto.
1542         * m68k-tdep.c: Ditto.
1543         * m88k-tdep.c: Ditto.
1544         * m88k-tdep.h: Ditto.
1545         * machoread.c: Ditto.
1546         * macrocmd.c: Ditto.
1547         * macroexp.c: Ditto.
1548         * macrotab.c: Ditto.
1549         * main.c: Ditto.
1550         * maint.c: Ditto.
1551         * mdebugread.c: Ditto.
1552         * mdebugread.h: Ditto.
1553         * memattr.c: Ditto.
1554         * memattr.h: Ditto.
1555         * memory-map.h: Ditto.
1556         * mep-tdep.c: Ditto.
1557         * microblaze-rom.c: Ditto.
1558         * microblaze-tdep.c: Ditto.
1559         * minsyms.c: Ditto.
1560         * mips-irix-tdep.c: Ditto.
1561         * mips-linux-nat.c: Ditto.
1562         * mips-linux-tdep.c: Ditto.
1563         * mips-linux-tdep.h: Ditto.
1564         * mipsnbsd-nat.c: Ditto.
1565         * mipsnbsd-tdep.c: Ditto.
1566         * mipsread.c: Ditto.
1567         * mips-tdep.c: Ditto.
1568         * mips-tdep.h: Ditto.
1569         * mn10300-linux-tdep.c: Ditto.
1570         * mn10300-tdep.c: Ditto.
1571         * mn10300-tdep.h: Ditto.
1572         * monitor.c: Ditto.
1573         * monitor.h: Ditto.
1574         * moxie-tdep.c: Ditto.
1575         * moxie-tdep.h: Ditto.
1576         * mt-tdep.c: Ditto.
1577
1578 2011-01-08  Mike Frysinger  <vapier@gentoo.org>
1579
1580         * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
1581
1582 2011-01-08  Robert Millan  <rmh@gnu.org>
1583
1584         * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
1585
1586 2011-01-07  Michael Snyder  <msnyder@vmware.com>
1587
1588         * charset.c (_initialize_charset): Fix typo in string.
1589
1590 2011-01-07  Michael Snyder  <msnyder@vmware.com>
1591
1592         * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
1593         for i18n.
1594         * tui/tui-layout.c (tui_set_layout_for_display_command):
1595         Split line so that operator goes to beginning of line.
1596         * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
1597         assignment out of if statement.
1598
1599 2011-01-07  Michael Snyder  <msnyder@vmware.com>
1600
1601         * ada-lang.c: Comment cleanup, mostly periods and spaces.
1602         * ada-lang.h: Ditto.
1603         * ada-tasks.c: Ditto.
1604         * ada-valprint.c: Ditto.
1605         * aix-threads.c: Ditto.
1606         * alpha-linux-nat.c: Ditto.
1607         * alpha-linux-tdep.c: Ditto.
1608         * alpha-mdebug-tdep.c: Ditto.
1609         * alpha-nat.c: Ditto.
1610         * alpha-osf1-tdep.c: Ditto.
1611         * alpha-tdep.c: Ditto.
1612         * alphabsd-nat.c: Ditto.
1613         * alphabsd-tdep.c: Ditto.
1614         * amd64-darwin-tdep.c: Ditto.
1615         * amd64-linux-nat.c: Ditto.
1616         * amd64-linux-tdep.c: Ditto.
1617         * amd64-sol2-tdep.c: Ditto.
1618         * amd64-tdep.c: Ditto.
1619         * amd64-fbsd-tdep.c: Ditto.
1620         * amd64-nbsd-tdep.c: Ditto.
1621         * amd64-obsd-tdep.c: Ditto.
1622         * amd64-linux-nat.c: Ditto.
1623         * amd64-linux-tdep.c: Ditto.
1624         * arm-tdep.c: Ditto.
1625         * arm-tdep.h: Ditto.
1626         * armnbsd-nat.c: Ditto.
1627         * avr-tdep.c: Ditto.
1628         * bfin-tdep.c: Ditto.
1629         * bsd-kvm.c: Ditto.
1630         * c-typeprintc: Ditto.
1631         * c-valprint.c: Ditto.
1632         * coff-pe-read.h: Ditto.
1633         * coffreead.c: Ditto.
1634         * cris-tdep.c: Ditto.
1635         * d-lang.c: Ditto.
1636         * darwin-nat-info.c: Ditto.
1637         * darwin-nat.c: Ditto.
1638         * dbug-rom.c: Ditto.
1639         * dbxread.c: Ditto.
1640         * dcache.c: Ditto.
1641         * dcache.h: Ditto.
1642         * dec-thread.c: Ditto.
1643         * defs.h: Ditto.
1644         * demangle.c: Ditto.
1645         * dicos-tdep.c: Ditto.
1646         * dictionary.c: Ditto.
1647         * dictionary.h: Ditto.
1648         * dink32-rom.c: Ditto.
1649         * disasm.c: Ditto.
1650         * doublest.c: Ditto.
1651         * dsrec.c: Ditto.
1652         * dummy-frame.c: Ditto.
1653         * dwarf2-frame.c: Ditto.
1654         * dwarf2expr.c: Ditto.
1655         * dwarf2loc.c: Ditto.
1656         * dwarf2read.c: Ditto.
1657         * elfread.c: Ditto.
1658         * environ.c: Ditto.
1659         * eval.c: Ditto.
1660         * event-top.h: Ditto.
1661         * exceptions.c: Ditto.
1662         * exceptions.h: Ditto.
1663         * exec.c: Ditto.
1664         * expprint.c: Ditto.
1665         * expression.h: Ditto.
1666         * f-exp.y: Ditto.
1667         * f-lang.c: Ditto.
1668         * f-lang.h: Ditto.
1669         * f-typeprint.c: Ditto.
1670         * f-valprint.c: Ditto.
1671         * fbsd-nat.c: Ditto.
1672         * findvar.c: Ditto.
1673         * fork-child.c: Ditto.
1674         * frame.c: Ditto.
1675         * frame.h: Ditto.
1676         * frv-linux-tdep.c: Ditto.
1677         * frv-tdep.c: Ditto.
1678         * gcore.c: Ditto.
1679         * gdb-stabs.h: Ditto.
1680         * gdb_assert.h: Ditto.
1681         * gdb_string.h: Ditto.
1682         * gdb_thread_db.h: Ditto.
1683         * gdb_wait.h: Ditto.
1684         * gdbarch.sh: Ditto.
1685         * gdbcore.h: Ditto.
1686         * gdbthread.h: Ditto.
1687         * gdbtypes.c: Ditto.
1688         * gdbtypes.h: Ditto.
1689         * gnu-nat.c: Ditto.
1690         * gnu-nat.h: Ditto.
1691         * gnu-v2-abi.c: Ditto.
1692         * gnu-v3-abi.c: Ditto.
1693         * go32-nat.c: Ditto.
1694         * gdbarch.c: Regenerate.
1695         * gdbarch.h: Regenerate.
1696
1697 2011-01-07  Michael Snyder  <msnyder@vmware.com>
1698
1699         * ax-gdb.c: Adjust some long output strings.
1700         * breakpoint.c: Ditto.
1701         * charset.c: Ditto.
1702         * cp-abi.c: Ditto.
1703         * infcall.c: Ditto.
1704         * infrun.c: Ditto.
1705         * linux-nat.c: Ditto.
1706         * solib-pa64.c: Ditto.
1707         * solib-som.c: Ditto.
1708
1709 2011-01-06  Tom Tromey  <tromey@redhat.com>
1710
1711         PR python/12367:
1712         * NEWS: Add item.
1713         * python/python.c (GdbMethods): Add "newest_frame" method.
1714         * python/python-internal.h (gdbpy_newest_frame): Declare.
1715         * python/py-frame.c (gdbpy_newest_frame): New function.
1716
1717 2010-01-06  Paul Pluzhnikov  <ppluzhnikov@google.com>
1718
1719         * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
1720         * jit.c (jit_debug): New variable.
1721         (show_jit_debug): New function.
1722         (struct target_buffer): Use ULONGEST.
1723         (bfd_open_from_target_memory): Likewise.
1724         (jit_register_code, jit_inferior_init): Add debug output.
1725         (_initialize_jit): Register "debug jit" command.
1726
1727 2011-01-06  Tom Tromey  <tromey@redhat.com>
1728
1729         * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
1730         * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
1731         and ARCH_FRAME.
1732
1733 2011-01-06  Tom Tromey  <tromey@redhat.com>
1734
1735         * python/py-frame.c (frapy_block): Use get_frame_block.
1736
1737 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
1738
1739         Do not stop on SIGPRIO signals by default
1740         * infrun.c (_initialize_infrun): Unset signal_stop and
1741         signal_print for TARGET_SIGNAL_PRIO.
1742
1743 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
1744
1745         * ada-tasks.c: Fix style violation in comment.
1746
1747 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
1748
1749         * linespec.c (decode_compound, find_method): Remove trailing \n
1750         at end of error string.
1751         * solib-irix.c (irix_current_sos): Likewise.
1752         * varobj.c (uninstall_variable): Likewise.
1753
1754 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
1755
1756         * copyright.py: New script.
1757         * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
1758         Launch emacs without exec'ing. Call copyright.py afterwards.
1759
1760 2011-01-05  Michael Snyder  <msnyder@vmware.com>
1761
1762         * addrmap.c: Shorten lines of >= 80 columns.
1763         * arch-utils.c: Ditto.
1764         * arch-utils.h: Ditto.
1765         * ax-gdb.c: Ditto.
1766         * ax-general.c: Ditto.
1767         * bcache.c: Ditto.
1768         * blockframe.c: Ditto.
1769         * breakpoint.c: Ditto.
1770         * buildsym.c: Ditto.
1771         * c-lang.c: Ditto.
1772         * c-typeprint.c: Ditto.
1773         * charset.c: Ditto.
1774         * coffread.c: Ditto.
1775         * command.h: Ditto.
1776         * corelow.c: Ditto.
1777         * cp-abi.c: Ditto.
1778         * cp-namespace.c: Ditto.
1779         * cp-support.c: Ditto.
1780         * dbug-rom.c: Ditto.
1781         * dbxread.c: Ditto.
1782         * defs.h: Ditto.
1783         * dfp.c: Ditto.
1784         * dfp.h: Ditto.
1785         * dictionary.c: Ditto.
1786         * disasm.c: Ditto.
1787         * doublest.c: Ditto.
1788         * dwarf2-frame.c: Ditto.
1789         * dwarf2expr.c: Ditto.
1790         * dwarf2loc.c: Ditto.
1791         * dwarf2read.c: Ditto.
1792         * elfread.c: Ditto.
1793         * eval.c: Ditto.
1794         * event-loop.c: Ditto.
1795         * event-loop.h: Ditto.
1796         * exceptions.h: Ditto.
1797         * exec.c: Ditto.
1798         * expprint.c: Ditto.
1799         * expression.h: Ditto.
1800         * f-lang.c: Ditto.
1801         * f-valprint.c: Ditto.
1802         * findcmd.c: Ditto.
1803         * frame-base.c: Ditto.
1804         * frame-unwind.c: Ditto.
1805         * frame-unwind.h: Ditto.
1806         * frame.c: Ditto.
1807         * frame.h: Ditto.
1808         * gcore.c: Ditto.
1809         * gdb-stabs.h: Ditto.
1810         * gdb_assert.h: Ditto.
1811         * gdb_dirent.h: Ditto.
1812         * gdb_obstack.h: Ditto.
1813         * gdbcore.h: Ditto.
1814         * gdbtypes.c: Ditto.
1815         * gdbtypes.h: Ditto.
1816         * inf-ttrace.c: Ditto.
1817         * infcall.c: Ditto.
1818         * infcmd.c: Ditto.
1819         * inflow.c: Ditto.
1820         * infrun.c: Ditto.
1821         * inline-frame.h: Ditto.
1822         * language.c: Ditto.
1823         * language.h: Ditto.
1824         * libunwind-frame.c: Ditto.
1825         * libunwind-frame.h: Ditto.
1826         * linespec.c: Ditto.
1827         * linux-nat.c: Ditto.
1828         * linux-nat.h: Ditto.
1829         * linux-thread-db.c: Ditto.
1830         * machoread.c: Ditto.
1831         * macroexp.c: Ditto.
1832         * macrotab.c: Ditto.
1833         * main.c: Ditto.
1834         * maint.c: Ditto.
1835         * mdebugread.c: Ditto.
1836         * memattr.c: Ditto.
1837         * minsyms.c: Ditto.
1838         * monitor.c: Ditto.
1839         * monitor.h: Ditto.
1840         * objfiles.c: Ditto.
1841         * objfiles.h: Ditto.
1842         * osabi.c: Ditto.
1843         * p-typeprint.c: Ditto.
1844         * p-valprint.c: Ditto.
1845         * parse.c: Ditto.
1846         * printcmd.c: Ditto.
1847         * proc-events.c: Ditto.
1848         * procfs.c: Ditto.
1849         * progspace.c: Ditto.
1850         * progspace.h: Ditto.
1851         * psympriv.h: Ditto.
1852         * psymtab.c: Ditto.
1853         * record.c: Ditto.
1854         * regcache.c: Ditto.
1855         * regcache.h: Ditto.
1856         * remote-fileio.c: Ditto.
1857         * remote.c: Ditto.
1858         * ser-mingw.c: Ditto.
1859         * ser-tcp.c: Ditto.
1860         * ser-unix.c: Ditto.
1861         * serial.c: Ditto.
1862         * serial.h: Ditto.
1863         * solib-frv.c: Ditto.
1864         * solib-irix.c: Ditto.
1865         * solib-osf.c: Ditto.
1866         * solib-pa64.c: Ditto.
1867         * solib-som.c: Ditto.
1868         * solib-sunos.c: Ditto.
1869         * solib-svr4.c: Ditto.
1870         * solib-target.c: Ditto.
1871         * solib.c: Ditto.
1872         * somread.c: Ditto.
1873         * source.c: Ditto.
1874         * stabsread.c: Ditto.
1875         * stabsread.c: Ditto.
1876         * stack.c: Ditto.
1877         * stack.h: Ditto.
1878         * symfile-mem.c: Ditto.
1879         * symfile.c: Ditto.
1880         * symfile.h: Ditto.
1881         * symmisc.c: Ditto.
1882         * symtab.c: Ditto.
1883         * symtab.h: Ditto.
1884         * target-descriptions.c: Ditto.
1885         * target-memory.c: Ditto.
1886         * target.c: Ditto.
1887         * target.h: Ditto.
1888         * terminal.h: Ditto.
1889         * thread.c: Ditto.
1890         * top.c: Ditto.
1891         * tracepoint.c: Ditto.
1892         * tracepoint.h: Ditto.
1893         * ui-file.c: Ditto.
1894         * ui-file.h: Ditto.
1895         * ui-out.h: Ditto.
1896         * user-regs.c: Ditto.
1897         * user-regs.h: Ditto.
1898         * utils.c: Ditto.
1899         * valarith.c: Ditto.
1900         * valops.c: Ditto.
1901         * valprint.c: Ditto.
1902         * valprint.h: Ditto.
1903         * value.c: Ditto.
1904         * varobj.c: Ditto.
1905         * varobj.h: Ditto.
1906         * vec.h: Ditto.
1907         * xcoffread.c: Ditto.
1908         * xcoffsolib.c: Ditto.
1909         * xcoffsolib.h: Ditto.
1910         * xml-syscall.c: Ditto.
1911         * xml-tdesc.c: Ditto.
1912
1913 2011-01-05  Michael Snyder  <msnyder@vmware.com>
1914
1915         * cli/cli-cmds.c: Shorten lines of >= 80 columns.
1916         * cli/cli-decode.c: Ditto.
1917         * cli/cli-dump.c: Ditto.
1918         * cli/cli-logging.c: Ditto.
1919         * cli/cli-script.c: Ditto.
1920         * cli/cli-setshow.c: Ditto.
1921         * common/signals.c: Ditto.
1922         * mi/mi-cmd-break.c: Ditto.
1923         * mi/mi-cmd-disas.c: Ditto.
1924         * mi/mi-cmd-stack.c: Ditto.
1925         * mi/mi-cmd-var.c: Ditto.
1926         * mi/mi-cmds.c: Ditto.
1927         * mi/mi-common.h: Ditto.
1928         * mi/mi-console.c: Ditto.
1929         * mi/mi-interp.c: Ditto.
1930         * mi/mi-main.c: Ditto.
1931         * osf-share/cma_attr.c: Ditto.
1932         * osf-share/cma_deb_core.h: Ditto.
1933         * osf-share/cma_debug_client.h: Ditto.
1934         * osf-share/cma_handle.h: Ditto.
1935         * osf-share/cma_mutex.h: Ditto.
1936         * osf-share/cma_stack_int.h: Ditto.
1937         * osf-share/cma_tcb_defs.h: Ditto.
1938         * python/py-auto-load.c: Ditto.
1939         * python/py-breakpoint.c: Ditto.
1940         * python/py-cmd.c: Ditto.
1941         * python/py-frame.c: Ditto.
1942         * python/py-objfile.c: Ditto.
1943         * python/py-param.c: Ditto.
1944         * python/py-progspace.c: Ditto.
1945         * python/py-symbol.c: Ditto.
1946         * python/py-value.c: Ditto.
1947         * python/python-internal.h: Ditto.
1948         * python/python.c: Ditto.
1949         * tui/tui-data.c: Ditto.
1950         * tui/tui-disasm.c: Ditto.
1951         * tui/tui-hooks.c: Ditto.
1952         * tui/tui-io.c: Ditto.
1953         * tui/tui-layout.c: Ditto.
1954         * tui/tui-regs.c: Ditto.
1955         * tui/tui-source.c: Ditto.
1956         * tui/tui-stack.c: Ditto.
1957         * tui/tui-win.c: Ditto.
1958         * tui/tui-windata.c: Ditto.
1959         * tui/tui-winsource.c: Ditto.
1960
1961 2011-01-05  Joel Brobecker  <brobecker@adacore.com>
1962
1963         * configure.ac, gdb.1: Copyright year update.
1964
1965 2011-01-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
1966
1967         * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
1968         this_pc_in_block, morestack_msym and morestack_name.  Check for
1969         "__morestack" minimal symbol there.
1970
1971 2011-01-03  Joel Brobecker  <brobecker@adacore.com>
1972
1973         * symfile.c (find_sym_fns): Add call to dont_repeat.
1974
1975 2011-01-01  Joel Brobecker  <brobecker@adacore.com>
1976
1977         Copyright year update in most files (performed by copyright.sh).
1978
1979 2011-01-01  Joel Brobecker  <brobecker@adacore.com>
1980
1981         * top.c (print_gdb_version): Update copyright year in version output.
1982
1983 For older changes see ChangeLog-2010.
1984 \f
1985 Local Variables:
1986 mode: change-log
1987 left-margin: 8
1988 fill-column: 74
1989 version-control: never
1990 coding: utf-8
1991 End: