gdb/ChangeLog

   1 2015-06-30  Patrick Palka  <patrick@parcs.ath.cx>
   2
   3         * tui/tui-stack.c (tui_set_locator_info): Explicitly pass
   4         LOCATOR_WIN to tui_alloc_content.
   5
   6 2015-06-30  Yao Qi  <yao.qi@linaro.org>
   7
   8         PR tdep/18605
   9         * arm-tdep.c (arm_get_next_pc_raw): Break for media
  10         instructions.
  11
  12 2015-06-29  Kevin Buettner  <kevinb@redhat.com>
  13
  14         * rx-tdep.c (RX_PSW_REGNUM): New enum constant.
  15         (rx_dwarf_reg_to_regnum): New function.
  16         (rx_gdbarch_init): Register rx_dwarf_reg_to_regnum.  Use dwarf2
  17         unwinding.
  18
  19 2015-06-29  Pedro Alves  <palves@redhat.com>
  20
  21         PR threads/18127
  22         * infcall.c (run_inferior_call): On infcall success, if the thread
  23         was marked stopped before, reset it back to stopped.
  24         * infrun.c (resume): Don't suppress the set_running calls when
  25         doing an infcall.
  26         (normal_stop): Only discard the finish_thread_state cleanup if the
  27         infcall succeeded.
  28
  29 2015-06-29  Pierre Langlois  <pierre.langlois@arm.com>
  30
  31         * MAINTAINERS (Write After Approval): Update my email address.
  32
  33 2015-06-26  Keith Seitz  <keiths@redhat.com>
  34             Doug Evans  <dje@google.com>
  35
  36         PR 16253
  37         * block.c (block_lookup_symbol): For non-function blocks,
  38         continue to search for a symbol with an exact domain match
  39         Otherwise, return any previously found "best domain" symbol.
  40         (block_lookup_symbol_primary): Likewise.
  41
  42 2015-06-26  Patrick Palka  <patrick@parcs.ath.cx>
  43
  44         * NEWS: Mention the new option "history remove-duplicates".
  45         * top.c (history_remove_duplicates): New static variable.
  46         (show_history_remove_duplicates): New static function.
  47         (gdb_add_history): Conditionally remove duplicate history
  48         entries.
  49         (init_main): Add "history remove-duplicates" option.
  50
  51 2015-06-26  Patrick Palka  <patrick@parcs.ath.cx>
  52
  53         * tui/tui-win.c (focus_completer): New static function.
  54         (_initialize_tui_win): Set the completion function of the
  55         "focus" command to focus_completer.
  56
  57 2015-06-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
  58
  59         * linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
  60         and language_asm..
  61         * symtab.c (find_function_start_sal): Likewise.
  62
  63 2015-06-25  Gary Benson  <gbenson@redhat.com>
  64
  65         * solib.c (solib_find_1): Set local variable sysroot to NULL if
  66         it is the empty string after trailing slashes have been stripped.
  67
  68 2015-06-25  Gary Benson  <gbenson@redhat.com>
  69
  70         * exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
  71         * infrun.c (follow_exec): Likewise.
  72         * remote.c (remote_filesystem_is_local): Likewise.
  73         * solib.c (solib_find_1): Likewise.
  74
  75 2015-06-24  Keith Seitz  <keiths@redhat.com>
  76
  77         * build-id.c (build_id_to_debug_bfd): Add cleanup to free
  78         return value from lrealpath.
  79
  80 2015-06-24  Mike Frysinger  <vapier@gentoo.org>
  81
  82         * remote-sim.c (gdbsim_open): Move sysroot update to the top.
  83
  84 2015-06-24  Mike Frysinger  <vapier@gentoo.org>
  85
  86         * remote-sim.c: Include gdb_bfd.h.
  87         (gdbsim_open): Declare new local sysroot pointing to gdb_sysroot.
  88         Skip TARGET_SYSROOT_PREFIX in gdb_sysroot when it is active.
  89
  90 2015-06-24  Yao Qi  <yao.qi@linaro.org>
  91
  92         * aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
  93         set_gdbarch_get_siginfo_type.
  94         * amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
  95         * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
  96         * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
  97         * m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
  98         * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
  99         * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
 100         * tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
 101         * linux-tdep.c (linux_get_siginfo_type): Change it to static.
 102         (linux_init_abi): Call set_gdbarch_get_siginfo_type.
 103         * linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
 104
 105 2015-06-24  Gary Benson  <gbenson@redhat.com>
 106
 107         * common/buffer.c (stdint.h): Do not include.
 108         * common/print-utils.c (stdint.h): Likewise.
 109         * compile/compile-c-symbols.c (gdb_assert.h): Likewise.
 110         * compile/compile-c-types.c (gdb_assert.h): Likewise.
 111         * ft32-tdep.c (gdb_assert.h): Likewise.
 112         * guile/scm-utils.c (stdint.h): Likewise.
 113         * i386-linux-tdep.c (stdint.h): Likewise.
 114         * i386-tdep.c (stdint.h): Likewise.
 115         * nat/linux-btrace.c (stdint.h): Likewise.
 116         * nat/linux-btrace.h (stdint.h): Likewise.
 117         * nat/linux-ptrace.c (stdint.h): Likewise.
 118         * nat/mips-linux-watch.h (stdint.h): Likewise.
 119         * ppc-linux-nat.c (stdint.h): Likewise.
 120         * python/python-internal.h (stdint.h): Likewise.
 121         * stub-termcap.c (stdlib.h): Likewise.
 122         * target/target.h (stdint.h): Likewise.
 123         * xtensa-linux-nat.c (stdint.h): Likewise.
 124
 125 2015-06-23  Patrick Palka  <patrick@parcs.ath.cx>
 126
 127         * top.c (init_history): Look at errno after calling strtol to
 128         properly map large GDBHISTSIZE values to infinity.
 129
 130 2015-06-23  Doug Evans  <dje@google.com>
 131
 132         * inferior.h (struct inferior_suspend_state): Delete, unused.
 133         All references deleted.
 134
 135 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 136
 137         * microblaze-tdep.c (microblaze_push_dummy_code): Delete.
 138         (microblaze_push_dummy_call): Likewise.
 139         (microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
 140         and set_gdbarch_push_dummy_call.
 141
 142 2015-06-23  Yao Qi  <yao.qi@linaro.org>
 143
 144         * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
 145         Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
 146         (amd64_linux_store_inferior_registers): Likewise.
 147         * arm-linux-nat.c (fetch_fpregister): Likewise.
 148         (fetch_fpregs, store_fpregister): Likewise.
 149         (store_fpregister, store_fpregs): Likewise.
 150         (fetch_register, fetch_regs): Likewise.
 151         (store_register, store_regs): Likewise.
 152         (fetch_vfp_regs, store_vfp_regs): Likewise.
 153         (arm_linux_read_description): Check have_ptrace_getregset is
 154         TRIBOOL_UNKNOWN.  Set have_ptrace_getregset to TRIBOOL_TRUE
 155         or TRIBOOL_FALSE.
 156         * i386-linux-nat.c (fetch_xstateregs): Check
 157         have_ptrace_getregset is not TRIBOOL_TRUE.
 158         (store_xstateregs): Likewise.
 159         * linux-nat.c (have_ptrace_getregset): Change its type to
 160         enum tribool.
 161         * linux-nat.h (tribool): New enum.
 162         * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
 163         Check whether have_ptrace_getregset is TRIBOOL_TRUE.
 164
 165 2015-06-19  Doug Evans  <dje@google.com>
 166
 167         * NEWS: Mention Sun's version of stabs is no longer supported.
 168         * elfread.c (free_elfinfo): Delete.  All uses updated.
 169         (elfstab_offset_sections): Delete.  All uses updated.
 170         * gdb-stabs.h (stab_section_info): Delete.  All uses updated.
 171         * psympriv.h (partial_symtab) <section_offsets>: Delete.
 172         All uses updated.
 173         * psymtab.c (start_psymtab_common): Delete arg section_offsets.
 174         All callers updated.
 175
 176 2015-06-18  Simon Marchi  <simon.marchi@ericsson.com>
 177
 178         * common/rsp-low.c (needs_escaping): New.
 179         (remote_escape_output): Add unit_size parameter. Refactor to
 180         support multi-byte addressable units.  Rename parameters.
 181         * common/rsp-low.h (remote_escape_output): Add unit_size
 182         parameter and rename others. Update doc.
 183         * remote.c (align_for_efficient_write): New.
 184         (remote_write_bytes_aux): Add unit_size parameter and use it.
 185         Rename some variables.  Update doc.
 186         (remote_xfer_partial): Get unit size and use it.
 187         (remote_read_bytes_1): Add unit_size parameter and use it.
 188         Rename some variables. Update doc.
 189         (remote_write_bytes): Same.
 190         (remote_xfer_live_readonly_partial): Same.
 191         (remote_read_bytes): Same.
 192         (remote_flash_write): Update call to remote_write_bytes_aux.
 193         (remote_write_qxfer): Update call to remote_escape_output.
 194         (remote_search_memory): Same.
 195         (remote_hostio_pwrite): Same.
 196
 197 2015-06-17  Luis Machado  <lgustavo@codesourcery.com>
 198
 199         * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
 200         locations as inserted.
 201         Update and expand comment about permanent locations.
 202         (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
 203         Move comment to add_location_to_breakpoint.
 204         (update_global_location_list): Don't error out if a permanent
 205         breakpoint is not marked inserted.
 206         Don't error out if a non-permanent breakpoint location is inserted on
 207         top of a permanent breakpoint.
 208
 209 2015-06-17  Luis Machado  <lgustavo@codesourcery.com>
 210
 211         * breakpoint.c (make_breakpoint_permanent): Remove unused
 212         function.
 213         * breakpoint.h (make_breakpoint_permanent): Remove declaration.
 214
 215 2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>
 216
 217         PR gdb/16999
 218         * NEWS: Mention new GDBHISTSIZE behavior.
 219         * top.c (init_history): For null or out-of-range GDBHISTSIZE,
 220         set history size to unlimited.  Ignore non-numeric GDBHISTSIZE.
 221
 222 2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>
 223
 224         * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
 225         * top.c (init_history): Read from GDBHISTSIZE instead of
 226         HISTSIZE.
 227         (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
 228
 229 2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>
 230
 231         * top.c (gdb_safe_append_history): Do not call
 232         history_truncate_file if the history is not stifled.
 233
 234 2015-06-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 235
 236         * syscalls/s390-linux.xml: Add syscalls 344 through 354.
 237         * syscalls/s390x-linux.xml: Likewise.
 238
 239 2015-06-16  Michael Eager  <eager@eagercon.com>
 240
 241         * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
 242
 243 2015-06-16  Patrick Palka  <patrick@parcs.ath.cx>
 244
 245         * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
 246         target_terminal_ours_for_output() before calling
 247         tui_show_frame_info(), and restore the original terminal
 248         settings afterwards.
 249
 250 2015-06-16  Martin Simmons  <martin@lispworks.com>  (tiny patch)
 251
 252         * arm-linux-nat.c: Include nat/linux-ptrace.h.
 253
 254 2015-06-15  Simon Marchi  <simon.marchi@ericsson.com>
 255
 256         * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
 257         memory unit size.
 258         (mi_cmd_data_write_memory_bytes): Same.
 259
 260 2015-06-15  Simon Marchi  <simon.marchi@ericsson.com>
 261
 262         * corefile.c (write_memory): Update doc.
 263         * gdbcore.h (write_memory): Same.
 264
 265 2015-06-15  Jan Kratochvil  <jan.kratochvil@redhat.com>
 266
 267         * linux-tdep.c (enum filterflags): Make it from anonymous enum.
 268         (dump_mapping_p): Use it for parameter filterflags.
 269         (linux_find_memory_regions_full): Use it for variable filterflags.
 270
 271 2015-06-15  Aleksandar Ristovski  <aristovski@qnx.com
 272             Jan Kratochvil  <jan.kratochvil@redhat.com>
 273
 274         Merge multiple hex conversions.
 275         * monitor.c: Include rsp-low.h.
 276         (fromhex): Remove definition.
 277
 278 2015-06-15  Aleksandar Ristovski  <aristovski@qnx.com
 279             Jan Kratochvil  <jan.kratochvil@redhat.com>
 280
 281         Move utility functions to common/.
 282         * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
 283         Move defs to common/common-utils.c.
 284         * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
 285         (skip_to_space_const): Move decls to common/common-utils.h.
 286         * common/common-defs.h: Move include of common-types.h before
 287         common-utils.h.
 288         * common/common-utils.c: Include host-defs.h and ctype.h.
 289         (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
 290         from utils.c.
 291         (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
 292         cli/cli-utils.c.
 293         * common/common-utils.h (strtoulst): Move decl from utils.h.
 294         (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
 295         Move from cli/cli-utils.h.
 296         * common/host-defs.h: Include limits.h.
 297         (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
 298         (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
 299         * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
 300         common/common-utils.h.
 301         * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
 302         (strtoulst): Move to common/common-utils.c.
 303         * utils.h (strtoulst): Moved decl to common/common-utils.h.
 304
 305 2015-06-15  Yao Qi  <yao.qi@linaro.org>
 306
 307         * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
 308
 309 2015-06-10  Jon Turney  <jon.turney@dronecode.org.uk>
 310
 311         * build-id.c: Don't include elf-bfd.h.
 312         (build_id_bfd_get): Use bfd_build_id.
 313         (build_id_verify): Ditto.
 314         * build-id.h: Ditto.
 315         (find_separate_debug_file_by_buildid): Ditto.
 316         * python/py-objfile.c: Don't include elf-bfd.h.
 317         (objfpy_get_build_id) Use bfd_build_id.
 318         (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
 319         * coffread.c: Include build-id.h.
 320         (coff_symfile_read): Try find_separate_debug_file_by_buildid.
 321
 322 2015-06-03  Jon Turney  <jon.turney@dronecode.org.uk>
 323
 324         * windows-nat.c (do_windows_fetch_inferior_registers)
 325         (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
 326         conditional with __CYGWIN__.
 327
 328 2015-06-13  Andrew Burgess  <andrew.burgess@embecosm.com>
 329
 330         * completer.c: Add arch-utils.h include.
 331         (enum reg_completer_targets): New enum.
 332         (reg_or_group_completer_1): New function containing old
 333         reg_or_group_completer, add and use new parameter to control what
 334         is completed on.  Use get_current_arch rather than architecture of
 335         currently selected frame.
 336         (reg_or_group_completer): Call new reg_or_group_completer_1.
 337         (reggroup_completer): Call new reg_or_group_completer_1.
 338         * completer.h (reggroup_completer): Add declaration.
 339         * tui/tui-regs.c: Add 'completer.h' include.
 340         (tui_reg_next_command): Renamed to...
 341         (tui_reg_next): ...this.  Adjust parameters and return rather than
 342         display new group.
 343         (tui_reg_prev_command): Renamed to...
 344         (tui_reg_prev): ...this.  Adjust parameters and return rather than
 345         display new group.
 346         (tui_reg_float_command): Delete.
 347         (tui_reg_general_command): Delete.
 348         (tui_reg_system_command): Delete.
 349         (tui_reg_command): Rewrite to perform switching of register group.
 350         Add header comment.
 351         (tuireglist): Remove.
 352         (tui_reggroup_completer): New function.
 353         (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
 354         creation of 'tui reg' command.
 355         * NEWS: Add comment about 'tui reg' changes.
 356
 357 2015-06-12  Simon Marchi  <simon.marchi@ericsson.com>
 358
 359         * target.c (target_read): Consider addressable unit size when
 360         reading from a memory object.
 361         (read_memory_robust): Same.
 362         (read_whatever_is_readable): Same.
 363         (target_write_with_progress): Consider addressable unit size
 364         when writing to a memory object.
 365         * target.h (target_read): Update documentation.
 366         (target_write): Add documentation.
 367
 368 2015-06-12  Simon Marchi  <simon.marchi@ericsson.com>
 369
 370         * arch-utils.h (default_addressable_memory_unit_size): New.
 371         * arch-utils.c (default_addressable_memory_unit_size): New.
 372         * gdbarch.sh (addressable_memory_unit_size): New.
 373         * gdbarch.h: Re-generate.
 374         * gdbarch.c: Re-generate.
 375
 376 2015-06-12  Simon Marchi  <simon.marchi@ericsson.com>
 377
 378         * target.c (target_read): Rename variables and use
 379         TARGET_XFER_E_IO.
 380         (target_read_with_progress): Same.
 381         (read_memory_robust): Constify parameters and rename
 382         variables.
 383         (read_whatever_is_readable): Constify parameters,
 384         rename variables, adjust formatting.
 385         * target.h (read_memory_robust): Constify parameters.
 386
 387 2015-06-12  Ulrich Weigand  <uweigand@de.ibm.com>
 388
 389         * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
 390         synthetic (non-AltiVec) vector types.
 391         (ppc64_sysv_abi_return_value): Likewise.
 392
 393 2015-06-12  Antoine Tremblay  <antoine.tremblay@ericsson.com>
 394
 395         PR breakpoints/16465
 396         * breakpoint.c (create_breakpoint): Save extra_string for
 397         pending breakpoints.
 398
 399 2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>
 400
 401         * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
 402         and bt_mask to CORE_ADDR.
 403
 404 2015-06-11  Gary Benson <gbenson@redhat.com>
 405
 406         * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
 407         (mnsh_recv_message): Likewise.
 408
 409 2015-06-11  Walfred Tedeschi  <walfred.tedeschi@intel.com>
 410
 411         * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
 412         long long int and plongest instead of %ll.
 413
 414 2015-06-11  Gary Benson <gbenson@redhat.com>
 415
 416         * nat/linux-namespaces.c (gdb_wait.h): New include.
 417         (sys/wait.h): Do not include.
 418
 419 2015-06-10  Simon Marchi  <simon.marchi@ericsson.com>
 420
 421         * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
 422         end_sequence is true.
 423
 424 2015-06-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
 425
 426         Code cleanup.
 427         * solib-target.c (library_list_start_list): Use explicit NULL
 428         comparison.
 429
 430 2015-06-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
 431
 432         * solib-target.c (library_list_start_list): Do not dereference
 433         variable version in its initialization.  Make the VERSION check handle
 434         NULL.
 435         (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
 436
 437 2015-06-10  Gary Benson <gbenson@redhat.com>
 438
 439         * NEWS: Announce support for direct access of executable and
 440         shared library files when attaching to inferiors in containers
 441         on GNU/Linux systems.
 442
 443 2015-06-10  Gary Benson <gbenson@redhat.com>
 444
 445         * remote.c (struct remote_state) <fs_pid>: New field.
 446         (new_remote_state): Initialize the above.
 447         (PACKET_vFile_setfs): New enum value.
 448         (remote_hostio_set_filesystem): New function.
 449         (remote_hostio_open): Call the above.
 450         (remote_hostio_unlink): Likewise.
 451         (remote_hostio_readlink): Likewise.
 452         (_initialize_remote): Register new "set/show remote
 453         hostio-setfs-packet" command.
 454         * NEWS: Announce new vFile:setfs packet.
 455
 456 2015-06-10  Gary Benson <gbenson@redhat.com>
 457
 458         * linux-nat.c (nat/linux-namespaces.h): New include.
 459         (fileio.h): Likewise.
 460         (linux_nat_filesystem_is_local): New function.
 461         (linux_nat_fileio_pid_of): Likewise.
 462         (linux_nat_fileio_open): Likewise.
 463         (linux_nat_fileio_readlink): Likewise.
 464         (linux_nat_fileio_unlink): Likewise.
 465         (linux_nat_add_target): Initialize to_filesystem_is_local,
 466         to_fileio_open, to_fileio_readlink and to_fileio_unlink.
 467         (_initialize_linux_nat): New "set/show debug linux-namespaces"
 468         commands.
 469         * NEWS: Mention new "set/show debug linux-namespaces" commands.
 470
 471 2015-06-10  Gary Benson <gbenson@redhat.com>
 472
 473         * target.h (struct inferior): New forward declaration.
 474         (struct target_ops) <to_filesystem_is_local>: Update comment.
 475         (struct target_ops) <to_fileio_open>: New argument inf.
 476         Update comment.  All implementations updated.
 477         (struct target_ops) <to_fileio_unlink>: Likewise.
 478         (struct target_ops) <to_fileio_readlink>: Likewise.
 479         (target_filesystem_is_local): Update comment.
 480         (target_fileio_open): New argument inf.  Update comment.
 481         (target_fileio_unlink): Likewise.
 482         (target_fileio_readlink): Likewise.
 483         (target_fileio_read_alloc): Likewise.
 484         (target_fileio_read_stralloc): Likewise.
 485         * target.c (target_fileio_open): New argument inf.
 486         Pass inf to implementation.  Update debug printing.
 487         (target_fileio_unlink): Likewise.
 488         (target_fileio_readlink): Likewise.
 489         (target_fileio_read_alloc_1): New argument inf. Pass inf
 490         to target_fileio_open.
 491         (target_fileio_read_alloc): New argument inf. Pass inf to
 492         target_fileio_read_alloc_1.
 493         (target_fileio_read_stralloc): Likewise.
 494         * gdb_bfd.c (inferior.h): New include.
 495         (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
 496         argument with new argument "inferior".  Pass inferior to
 497         target_fileio_open.
 498         (gdb_bfd_open): Supply inferior argument to
 499         gdb_bfd_iovec_fileio_open.
 500         * linux-tdep.c (linux_info_proc): Supply inf argument to
 501         relevant target_fileio calls.
 502         (linux_find_memory_regions_full): Likewise.
 503         (linux_fill_prpsinfo): Likewise.
 504         * remote.c (remote_filesystem_is_local): Supply inf
 505         argument to remote_hostio_open.
 506         (remote_file_put): Likewise.
 507         (remote_file_get): Likewise.
 508         (remote_file_delete): Supply inf argument to
 509         remote_hostio_unlink.
 510
 511 2015-06-10  Gary Benson <gbenson@redhat.com>
 512
 513         * inf-child.c (inf_child_fileio_open): Replace comment.
 514         (inf_child_fileio_pwrite): Likewise.
 515         (inf_child_fileio_pread): Likewise.
 516         (inf_child_fileio_fstat): Insert blank line before comment.
 517         (inf_child_fileio_close): Replace comment.
 518         (inf_child_fileio_unlink): Likewise.
 519         (inf_child_fileio_readlink): Likewise.
 520         * remote.c (remote_hostio_open): Likewise.
 521         (remote_hostio_pread): Likewise.
 522         (remote_hostio_pwrite): Likewise.
 523         (remote_hostio_close): Likewise.
 524         (remote_hostio_unlink): Likewise.
 525         (remote_hostio_readlink): Likewise.
 526         (remote_hostio_fstat): Likewise.
 527         (remote_filesystem_is_local): Likewise.
 528         * target.c (target_fileio_open): Likewise.
 529         (target_fileio_pwrite): Likewise.
 530         (target_fileio_pread): Likewise.
 531         (target_fileio_fstat): Insert blank line before comment.
 532         (target_fileio_close): Replace comment.
 533         (target_fileio_unlink): Likewise.
 534         (target_fileio_readlink): Likewise.
 535         (target_fileio_read_alloc): Likewise.
 536         (target_fileio_read_stralloc): Likewise.
 537
 538 2015-06-10  Gary Benson <gbenson@redhat.com>
 539
 540         * linux-thread-db.c (nat/linux-namespaces.h): New include.
 541         (check_pid_namespace_match): Use linux_ns_same rather than
 542         linux_proc_pid_get_ns to spot PID namespace mismatches.
 543         * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
 544         * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
 545
 546 2015-06-10  Gary Benson <gbenson@redhat.com>
 547
 548         * configure.ac (AC_CHECK_FUNCS): Add setns.
 549         * config.in: Regenerate.
 550         * configure: Likewise.
 551         * nat/linux-namespaces.h: New file.
 552         * nat/linux-namespaces.c: Likewise.
 553         * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
 554         (linux-namespaces.o): New rule.
 555         * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
 556         * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
 557         * config/arm/linux.mh (NATDEPFILES): Likewise.
 558         * config/i386/linux.mh (NATDEPFILES): Likewise.
 559         * config/i386/linux64.mh (NATDEPFILES): Likewise.
 560         * config/ia64/linux.mh (NATDEPFILES): Likewise.
 561         * config/m32r/linux.mh (NATDEPFILES): Likewise.
 562         * config/m68k/linux.mh (NATDEPFILES): Likewise.
 563         * config/mips/linux.mh (NATDEPFILES): Likewise.
 564         * config/pa/linux.mh (NATDEPFILES): Likewise.
 565         * config/powerpc/linux.mh (NATDEPFILES): Likewise.
 566         * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
 567         * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
 568         * config/s390/linux.mh (NATDEPFILES): Likewise.
 569         * config/sparc/linux.mh (NATDEPFILES): Likewise.
 570         * config/sparc/linux64.mh (NATDEPFILES): Likewise.
 571         * config/tilegx/linux.mh (NATDEPFILES): Likewise.
 572         * config/xtensa/linux.mh (NATDEPFILES): Likewise.
 573
 574 2015-06-10  Gary Benson <gbenson@redhat.com>
 575
 576         * utils.h (make_cleanup_close): Moved to common/filestuff.h.
 577         * utils.c (do_close_cleanup): Moved to common/filestuff.c.
 578         (make_cleanup_close): Likewise.
 579         * common/filestuff.h (make_cleanup_close): Moved from utils.h.
 580         * common/filestuff.c (do_close_cleanup): Moved from utils.c.
 581         (make_cleanup_close): Likewise.
 582
 583 2015-06-03  Jon Turney  <jon.turney@dronecode.org.uk>
 584
 585         * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
 586         from SuspendThread().
 587
 588 2015-06-03  Jon Turney  <jon.turney@dronecode.org.uk>
 589
 590         * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
 591         from OutputDebugString.
 592
 593 2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>
 594                         Mircea Gherzan  <mircea.gherzan@intel.com>
 595
 596         * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
 597         MPX_BT_MASK_32): New macros.
 598         (i386_mpx_set_bounds): New function that implements
 599         the command "set-mpx-bound".
 600         (i386_mpx_enabled): Helper function to test MPX availability.
 601         (i386_mpx_bd_base): Helper function to calculate the base directory
 602         address.
 603         (i386_mpx_get_bt_entry): Helper function to access a bound
 604         table entry.
 605         (i386_mpx_print_bounds): Effectively display bound information.
 606         (_initialize_i386_tdep): Add new commands to commands "set mpx" and
 607         "show mpx".
 608         (_initialize_i386_tdep):
 609         Add "bound" to the commands "show mpx" and "set mpx" commands.
 610         (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
 611         and "show mpx" commands.
 612         * NEWS: List new commands for MPX support.
 613
 614 2015-06-09  Gary Benson <gbenson@redhat.com>
 615
 616         * common/fileio.h (fileio_to_host_mode): New declaration.
 617         * common/fileio.c (fileio_to_host_mode): New Function.
 618         * inf-child.c (inf_child_fileio_open): Process mode argument
 619         with fileio_to_host_mode.
 620
 621 2015-06-09  Gary Benson <gbenson@redhat.com>
 622
 623         * common/fileio.c (fileio_mode_pack): Fix preprocessor
 624         conditional.
 625
 626 2015-06-05  Gary Benson <gbenson@redhat.com>
 627
 628         * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
 629         * remote.c (remote_filesystem_is_local): ...here.
 630
 631 2015-06-04  Yao Qi  <yao.qi@linaro.org>
 632
 633         * gdbarch.c: Regenerate it.
 634
 635 2015-06-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
 636
 637         * arch-utils.c (default_infcall_munmap): New.
 638         * arch-utils.h (default_infcall_munmap): New declaration.
 639         * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
 640         (munmap_list_free, munmap_listp_free_cleanup): New.
 641         (struct setup_sections_data): Add field munmap_list_headp.
 642         (setup_sections): Call munmap_list_add.
 643         (compile_object_load): New variable munmap_list_head, initialize
 644         setup_sections_data.munmap_list_headp, return munmap_list_head.
 645         * compile/compile-object-load.h (struct munmap_list): New declaration.
 646         (struct compile_module): Add field munmap_list_head.
 647         (munmap_list_free): New declaration.
 648         * compile/compile-object-run.c (struct do_module_cleanup): Add field
 649         munmap_list_head.
 650         (do_module_cleanup): Call munmap_list_free.
 651         (compile_object_run): Pass munmap_list_head to do_module_cleanup.
 652         * gdbarch.c: Regenerate.
 653         * gdbarch.h: Regenerate.
 654         * gdbarch.sh (infcall_munmap): New.
 655         * linux-tdep.c (linux_infcall_munmap): New.
 656         (linux_init_abi): Install it.
 657
 658 2015-06-02  Simon Marchi  <simon.marchi@ericsson.com>
 659
 660         PR gdb/15564
 661         * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
 662
 663 2015-06-02  Yao Qi  <yao.qi@linaro.org>
 664
 665         * i386-linux-nat.c: Include linux-nat.h.
 666
 667 2015-06-01  Andreas Schwab  <schwab@linux-m68k.org>
 668             Jan Kratochvil  <jan.kratochvil@redhat.com>
 669
 670         PR symtab/18392
 671         * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
 672         assertion.
 673         * dwarf2loc.c (chain_candidate): Likewise.
 674
 675 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 676
 677         * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
 678         (store_vfp_regs): Use PTRACE_SETREGSET.
 679
 680 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 681
 682         * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
 683         (fetch_fpregs): Likewise.
 684         * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
 685         (store_fpregs): Likewise.
 686
 687 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 688
 689         * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
 690         (fetch_regs): Likewise.
 691         (store_regs): Use PTRACE_SETREGSET.
 692         (store_register): Likewise.
 693
 694 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 695
 696         * arm-linux-nat.c (arm_linux_read_description): Check whether
 697         kernel supports PTRACE_GETREGSET.
 698
 699 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 700
 701         * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
 702         * linux-nat.c: ... here.
 703         * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
 704         to ...
 705         * linux-nat.h: ... here.
 706
 707 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 708
 709         * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
 710         * i386-linux-nat.c: Likewise.
 711         * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
 712         * s390-linux-nat.c: Include "nat/linux-ptrace.h".
 713         (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
 714         * x86-linux-nat.c: Include "nat/linux-ptrace.h".
 715         * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
 716
 717 2015-05-30  Eli Zaretskii  <eliz@gnu.org>
 718
 719         * go32-nat.c (go32_xfer_memory): Fix the return value to be
 720         compatible to what read_child and write_child return.  This
 721         unbreaks that DJGPP build of GDB which was broken since v7.7.
 722
 723 2015-05-29  Martin Galvan  <martin.galvan@tallertechnologies.com>
 724
 725         * MAINTAINERS (Write After Approval): Add Martin Galvan.
 726
 727 2015-05-29  Roland McGrath  <mcgrathr@google.com>
 728
 729         PR gdb/18464
 730         * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
 731         rather than internal_error for an unrecognized value.
 732
 733 2015-05-29  Max Filippov  <jcmvbkbc@gmail.com>
 734
 735         * xtensa-tdep.c (xtensa_pseudo_register_read)
 736         (xtensa_pseudo_register_write): Don't alias last pseudo register
 737         to a1.
 738
 739 2015-05-28  Don Breazeal  <donb@codesourcery.com>
 740
 741         * infrun.c (follow_fork_inferior): Ensure the use of
 742         process-style ptids (pid,0,0) in verbose/debug "Detaching"
 743         messages.
 744
 745 2015-05-28  Doug Evans  <dje@google.com>
 746
 747         * dwarf2read.c (record_line_ftype): Remove, duplicate.
 748
 749 2015-05-28  Yao Qi  <yao.qi@linaro.org>
 750
 751         * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
 752         (arm_linux_fetch_inferior_registers): Use
 753         tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
 754         (arm_linux_store_inferior_registers): Likewise.
 755         (arm_linux_read_description): Don't set
 756         arm_linux_has_wmmx_registers.
 757         * arm-tdep.c (arm_gdbarch_init): Set
 758         tdep->have_wmmx_registers according target descriptions.
 759         * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
 760         field.
 761
 762 2015-05-28  Yao Qi  <yao.qi@linaro.org>
 763
 764         * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
 765         (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
 766         instead of arm_linux_vfp_register_count.
 767         (store_vfp_regs): Likewise.
 768         (arm_linux_fetch_inferior_registers): Likewise.
 769         (arm_linux_store_inferior_registers): Likewise.
 770         (arm_linux_read_description): Don't set
 771         arm_linux_vfp_register_count.
 772         * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
 773         Adjust.
 774         * arm-tdep.c (arm_gdbarch_init): Add assert on
 775         vfp_register_count.
 776         * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
 777         field to vfp_register_count.  All users updated.
 778
 779 2015-05-28  Kyle Huey  <me@kylehuey.com>  (tiny patch)
 780
 781         * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
 782         ELFOSABI_GNU binaries.
 783
 784 2015-05-27  Doug Evans  <dje@google.com>
 785
 786         * dwarf2read.c (lnp_state_machine): New typedef.
 787         (lnp_reader_state): New typedef.
 788         (dwarf_record_line_1): Renamed from dwarf_record_line.
 789         All callers updated.
 790         (dwarf_record_line): New function.
 791         (init_lnp_state_machine): New function.
 792         (check_line_address): Replace p_record_line parameter with state.
 793         All callers updated.
 794         (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
 795         Update to record state in lnp_state_machine.
 796
 797 2015-05-27  Doug Evans  <dje@google.com>
 798
 799         * dwarf2read.c (record_line_ftype): New typedef.
 800         (check_line_address): New function.
 801         (dwarf_decode_lines_1): Call it.
 802
 803 2015-05-27  Doug Evans  <dje@google.com>
 804
 805         * NEWS: Mention "set debug dwarf-line".
 806         * dwarf2read.c (dwarf_line_debug): New static global.
 807         (add_include_dir): Add debug dwarf-line support.
 808         (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
 809         (_initialize_dwarf2_read): New parameter "debug dwarf-line".
 810
 811 2015-05-27  Doug Evans  <dje@google.com>
 812
 813         * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
 814         All callers updated.
 815         (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
 816         * cp-support.h (cp_lookup_nested_symbol): Update.
 817
 818 2015-05-27  Doug Evans  <dje@google.com>
 819
 820         PR symtab/18258
 821         * block.c (block_find_symbol): New function.
 822         (block_find_non_opaque_type): Ditto.
 823         (block_find_non_opaque_type_preferred): Ditto.
 824         * block.h (block_symbol_matcher_ftype): New typedef.
 825         (block_find_symbol): Declare.
 826         (block_find_non_opaque_type): Ditto.
 827         (block_find_non_opaque_type_preferred): Ditto.
 828         * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
 829         * psymtab.c (psym_lookup_symbol): Ditto.
 830         * symtab.c (basic_lookup_transparent_type_1): New function.
 831         (basic_lookup_transparent_type): Call it.
 832
 833 2015-05-27  Yao Qi  <yao.qi@linaro.org>
 834
 835         * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
 836         AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
 837
 838 2015-05-27  Yao Qi  <yao.qi@linaro.org>
 839
 840         * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
 841         before operator &&.
 842         (aarch64_record_load_store): Likewise.
 843
 844 2015-05-26  Doug Evans  <dje@google.com>
 845
 846         PR c++/18141, c++/18417.
 847         * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
 848         a typedef.
 849
 850 2015-05-26  Doug Evans  <dje@google.com>
 851
 852         * NEWS: Add entries for command renamings.
 853         * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
 854         All uses updated.
 855         (dwarf_die_debug): Renamed from dwarf2_die_debug.  All uses updated.
 856         (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
 857         All uses updated.
 858         (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
 859         All callers updated.  Fix spelling of DWARF in help text.
 860         (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
 861         All uses updated.
 862         (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
 863         All uses updated.
 864         (set_dwarf_cmd): Renamed from set_dwarf2_cmd.  All callers updated.
 865         (show_dwarf_cmd): Renamed from show_dwarf2_cmd.  All callers updated.
 866         (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
 867         All uses updated.
 868         (show_dwarf_always_disassemble): Renamed from
 869         show_dwarf2_always_disassemble.  All callers updated.
 870         (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
 871         "set/show dwarf".  Rename "set/show dwarf2 max-cache-age" to
 872         "set/show dwarf max-cache-age".  Rename
 873         "set/show dwarf2 always-disassemble" to
 874         "set/show dwarf always-disassemble".  Rename
 875         "set/show debug dwarf2-read" to "set/show debug dwarf-read".  Rename
 876         "set/show debug dwarf2-die" to "set/show debug dwarf-die".
 877
 878 2015-05-26  Doug Evans  <dje@google.com>
 879
 880         PR python/18438
 881         * python/py-lazy-string.c (stpy_convert_to_value): Use
 882         gdbpy_gdb_memory_error not PyExc_MemoryError.
 883         (gdbpy_create_lazy_string_object): Ditto.
 884
 885 2015-05-26  Andrew Burgess  <andrew.burgess@embecosm.com>
 886
 887         * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
 888
 889 2015-05-26  Andrew Burgess  <andrew.burgess@embecosm.com>
 890
 891         * tui/tui-regs.c (tui_reg_prev_command): New function.
 892         (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
 893         * reggroups.c (reggroup_prev): New function.
 894         * reggroups.h (reggroup_prev): Add declaration.  Update comment.
 895
 896 2015-05-26  Omair Javaid  <omair.javaid@linaro.org>
 897             Yao Qi  <yao.qi@linaro.org>
 898
 899         * aarch64-linux-tdep.c: Include linux-record.h and
 900         record-full.h.
 901         (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
 902         (aarch64_syscall): New enum.
 903         (aarch64_canonicalize_syscall): New function.
 904         (aarch64_all_but_pc_registers_record): New function.
 905         (aarch64_linux_syscall_record): New function.
 906         (aarch64_linux_init_abi): Install AArch64 process record
 907         handler.  Update to handle syscall recording.
 908         * aarch64-tdep.c: Include record.h and record-full.h.
 909         (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
 910         (struct aarch64_mem_r): Define.
 911         (aarch64_record_result): New enum.
 912         (struct insn_decode_record): Define.
 913         (insn_decode_record): New typedef.
 914         (aarch64_record_data_proc_reg): New function.
 915         (aarch64_record_data_proc_imm): New function.
 916         (aarch64_record_branch_except_sys): New function.
 917         (aarch64_record_load_store): New function.
 918         (aarch64_record_data_proc_simd_fp): New function.
 919         (aarch64_record_asimd_load_store): New function.
 920         (aarch64_record_decode_insn_handler): New function.
 921         (deallocate_reg_mem): New function.
 922         (aarch64_process_record): New function.
 923         * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
 924         New field.
 925         (aarch64_process_record): New extern declaration.
 926         * configure.tgt: Add linux-record.o to gdb_target_obs.
 927         * linux-record.h (struct linux_record_tdep) <arg7>: New field.
 928
 929 2015-05-26  Omair Javaid  <omair.javaid@linaro.org>
 930
 931         * NEWS: Add a note on process record-replay support on aarch64*-linux*
 932         targets.
 933
 934 2015-05-26  Martin Galvan  <martin.galvan@tallertechnologies.com>
 935
 936         * amd64-tdep.c: Replace in_function_epilogue_p with
 937         stack_frame_destroyed_p throughout.
 938         * arch-utils.c: Ditto.
 939         * arch-utils.h: Ditto.
 940         * arm-tdep.c: Ditto.
 941         * breakpoint.c: Ditto.
 942         * gdbarch.sh: Ditto.
 943         * hppa-tdep.c: Ditto.
 944         * i386-tdep.c: Ditto.
 945         * mips-tdep.c: Ditto.
 946         * nios2-tdep.c: Ditto.
 947         * rs6000-tdep.c: Ditto.
 948         * s390-linux-tdep.c: Ditto.
 949         * score-tdep.c: Ditto.
 950         * sh-tdep.c: Ditto.
 951         * sparc-tdep.c: Ditto.
 952         * sparc-tdep.h: Ditto.
 953         * sparc64-tdep.c: Ditto.
 954         * spu-tdep.c: Ditto.
 955         * tic6x-tdep.c: Ditto.
 956         * tilegx-tdep.c: Ditto.
 957         * xstormy16-tdep.c: Ditto.
 958         * gdbarch.c, gdbarch.h: Re-generated.
 959
 960 2015-05-22  Andrew Burgess  <andrew.burgess@embecosm.com>
 961
 962         * NEWS: Mention 'tui enable' and 'tui disable'.
 963         * tui/tui.c (tui_enable_command): New function.
 964         (tui_disable_command): New function.
 965         (_initialize_tui): New function.
 966
 967 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 968
 969         * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
 970
 971 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 972
 973         * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
 974         buf_ptr is freed.
 975
 976 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 977
 978         * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
 979         into ...
 980         (tui_set_layout_for_display_command): ...here, before calling
 981         tui_set_layout.  Only set the layout if gdb has not already
 982         entered the TUI_FAILURE state.
 983
 984 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 985
 986         * tui/tui-layout.c (layout_completer): New function.
 987         (_initialize_tui_layout): Set completer on layout command.
 988
 989 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 990
 991         * tui/tui-layout.c (tui_set_layout): Remove
 992         tui_register_display_type parameter.  Remove all checking of this
 993         parameter, and reindent function.  Update header comment.
 994         (tui_set_layout_for_display_command): Rename to...
 995         (tui_set_layout_by_name): ...this, and don't check for different
 996         register class types, don't pass a tui_register_display_type to
 997         tui_set_layout.  Update header comment.
 998         (layout_names): Remove register set specific names.
 999         * tui/tui-layout.h (tui_set_layout): Remove
1000         tui_register_display_type parameter.
1001         * tui/tui.c (tui_rl_change_windows): Don't pass a
1002         tui_register_display_type to tui_set_layout.
1003         (tui_rl_delete_other_windows): Likewise.
1004         (tui_enable): Likewise.
1005         * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
1006         (TUI_FLOAT_REGS_NAME_LOWER): Remove.
1007         (TUI_GENERAL_REGS_NAME): Remove.
1008         (TUI_GENERAL_REGS_NAME_LOWER): Remove.
1009         (TUI_SPECIAL_REGS_NAME): Remove.
1010         (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
1011         (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
1012         (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
1013         (enum tui_register_display_type): Remove.
1014         (struct tui_layout_def): Remove regs_display_type and
1015         float_regs_display_type fields.
1016         (struct tui_data_info): Remove regs_display_type field.
1017         (tui_layout_command): Use new name for
1018         tui_set_layout_for_display_command.
1019         * tui/tui-data.c (layout_def): Don't initialise removed fields.
1020         (tui_clear_win_detail): Don't initialise removed fields of
1021         win_info.
1022         * tui/tui-regs.c (tui_show_registers): Use new name for
1023         tui_set_layout_for_display_command.
1024         * tui/tui.h (tui_set_layout_for_display_command): Rename
1025         declaration to...
1026         (tui_set_layout_by_name): ...this.
1027         * printcmd.c (display_command): Remove tui related layout call,
1028         and reindent.
1029
1030 2015-05-20  Joel Brobecker  <brobecker@adacore.com>
1031
1032         * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
1033         (handle_inferior_event): New function.
1034
1035 2015-05-20  Joel Brobecker  <brobecker@adacore.com>
1036
1037         * ada-lang.c (to_fixed_array_type): Rename local variable
1038         typename into type_name.
1039
1040 2015-05-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
1041
1042         Fix ASAN crash for gdb.compile/compile.exp.
1043         * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
1044
1045 2015-05-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
1046
1047         * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
1048         (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
1049         * compile/compile-object-load.c (setup_sections, compile_object_load):
1050         Likewise.
1051         * compile/compile.c (compile_to_object): Likewise.
1052
1053 2015-05-16  Doug Evans  <xdje42@gmail.com>
1054
1055         * NEWS: Mention support for unbuffered Guile memory ports.
1056         * scm-ports.c (ioscm_memory_port): Update comments on end, size.
1057         (ioscm_lseek_address): Improve overflow calculation.
1058         (gdbscm_memory_port_fill_input): Add assert.
1059         (gdbscm_memory_port_write): Handle unbuffered ports.
1060         Handle large writes identical to Guile's fport_write.
1061         (gdbscm_memory_port_seek): Fix seeking past end check.
1062         (gdbscm_memory_port_close): Handle closing unbuffered port.
1063         (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
1064         (ioscm_init_memory_port): Handle unbuffered ports.
1065         (ioscm_reinit_memory_port): Ditto.
1066         (ioscm_init_memory_port): Update size calculation.
1067         (gdbscm_open_memory): Support zero sized ports.
1068
1069 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1070
1071         * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
1072         variable compiler warnings.
1073
1074 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1075
1076         * compile/compile-object-load.c (get_out_value_type): Fix returned type.
1077
1078 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1079             Phil Muldoon  <pmuldoon@redhat.com>
1080
1081         * NEWS (Changes since GDB 7.9): Add compile print.
1082         * compile/compile-c-support.c (add_code_header, add_code_footer)
1083         (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
1084         COMPILE_I_PRINT_VALUE_SCOPE.
1085         * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
1086         (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
1087         New.
1088         * compile/compile-object-load.c: Include block.h.
1089         (get_out_value_type): New function.
1090         (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
1091         COMPILE_I_PRINT_VALUE_SCOPE.  Set compile_module's OUT_VALUE_ADDR and
1092         OUT_VALUE_TYPE.
1093         * compile/compile-object-load.h (struct compile_module): Add fields
1094         out_value_addr and out_value_type.
1095         * compile/compile-object-run.c: Include valprint.h and compile.h.
1096         (struct do_module_cleanup): Add fields out_value_addr and
1097         out_value_type.
1098         (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
1099         COMPILE_I_PRINT_VALUE_SCOPE.
1100         (compile_object_run): Propagate out_value_addr and out_value_type.
1101         Pass OUT_VALUE_ADDR.
1102         * compile/compile.c: Include valprint.h.
1103         (compile_print_value, compile_print_command): New functions.
1104         (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
1105         (_initialize_compile): Update compile code help text.  Install
1106         compile_print_command.
1107         * compile/compile.h (compile_print_value): New prototype.
1108         * defs.h (enum compile_i_scope_types): Add
1109         COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
1110
1111 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1112
1113         * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
1114         Rely on its parameter count.
1115         (compile_object_load): Replace lookup_minimal_symbol_text by
1116         lookup_global_symbol_from_objfile.  Verify FUNC_SYM.  Set it in the
1117         return value.
1118         * compile/compile-object-load.h (struct compile_module): Replace
1119         func_addr by func_sym.
1120         * compile/compile-object-run.c: Include block.h.
1121         (compile_object_run): Reset module variable after it is freed.  Use
1122         FUNC_SYM instead of FUNC_ADDR.  Rely on it.
1123
1124 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1125
1126         * compile/compile-c-support.c (print_one_macro): Use #ifndef.
1127         (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
1128         (c_compute_program): Call generate_register_struct after typedefs.
1129         * compile/compile-loc2c.c (push, pushf_register_address)
1130         (pushf_register): Cast to GCC_UINTPTR.
1131         (do_compile_dwarf_expr_to_c): Use unused attribute.  Add space after
1132         type.  Use GCC_UINTPTR instead of void *.  Remove excessive cast.
1133         (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
1134         * compile/compile.c (_initialize_compile): Enable warnings for
1135         COMPILE_ARGS.
1136
1137 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1138
1139         * cli/cli-script.c (execute_control_command): Update
1140         eval_compile_command caller.
1141         * compile/compile-object-load.c (compile_object_load): Add parameters
1142         scope and scope_data.  Set them.
1143         * compile/compile-object-load.h (struct compile_module): Add fields
1144         scope and scope_data.
1145         (compile_object_load): Add parameters scope and scope_data.
1146         * compile/compile-object-run.c (struct do_module_cleanup): Add fields
1147         scope and scope_data.
1148         (compile_object_run): Propagate the fields scope and scope_data.
1149         * compile/compile.c (compile_file_command, compile_code_command):
1150         Update eval_compile_command callers.
1151         (eval_compile_command): Add parameter scope_data.  Pass it plus scope.
1152         * compile/compile.h (eval_compile_command): Add parameter scope_data.
1153         * defs.h (struct command_line): Add field scope_data.
1154
1155 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1156
1157         * printcmd.c (struct format_data): Move it to valprint.h.
1158         (print_command_parse_format, print_value): New functions from ...
1159         (print_command_1): ... here.  Call them.
1160         * valprint.h (struct format_data): Move it here from printcmd.c.
1161         (print_command_parse_format, print_value): New declarations.
1162
1163 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1164
1165         * compile/compile-object-load.c (compile_object_load): Add
1166         COMPILE_DEBUG message.
1167
1168 2015-05-15  Jerome Guitton  <guitton@adacore.com>
1169
1170         * ada-lang.c (ada_value_ptr_subscript): Use enum position of
1171         index to get element instead of enum value.
1172         (ada_value_slice_from_ptr, ada_value_slice): Use enum position
1173         of index to compute length, but enum values to compute bounds.
1174         (ada_array_length): Use enum position of index instead of enum value.
1175         (pos_atr): Move position computation to...
1176         (ada_evaluate_subexp): Use enum values to compute bounds.
1177         * gdbtypes.c (discrete_position): ...this new function.
1178         * gdbtypes.h (discrete_position): New function declaration.
1179         * valprint.c (val_print_array_elements): Call discrete_position
1180         to handle array indexed by non-contiguous enumeration types.
1181
1182 2015-05-15  Jerome Guitton  <guitton@adacore.com>
1183
1184         * ada-lang.c (find_parallel_type_by_descriptive_type):
1185         Go through typedefs during lookup.
1186         (to_fixed_array_type): Add support for non-bit packed arrays
1187         as variable-length fields.
1188
1189 2015-05-15  Pedro Alves  <palves@redhat.com>
1190             Simon Marchi  <simon.marchi@ericsson.com>
1191
1192         * event-loop.c (gdb_notifier) <next_file_handler,
1193         next_poll_fds_index>: New fields.
1194         (get_next_file_handler_to_handle_and_advance): New function.
1195         (delete_file_handler): If deleting the next file handler to
1196         handle, advance to the next file handler.
1197         (gdb_wait_for_event): Bail early if no event fired.  Poll file
1198         handlers in round-robin fashion.
1199
1200 2015-05-15  Pedro Alves  <palves@redhat.com>
1201
1202         * linux-tdep.c (linux_find_memory_regions_full): Rename local
1203         'private' to 'priv'.
1204
1205 2015-05-15  Pedro Alves  <palves@redhat.com>
1206
1207         * nat/linux-nat.h: Include "target/waitstatus.h".
1208
1209 2015-05-15  Yuanhui Zhang  <asmwarrior@gmail.com>
1210
1211         * python/py-unwind.c (struct reg_info): Move out of ...
1212         (struct cached_frame_info): ... this scope.
1213         (pending_frame_object_type, unwind_info_object_type): Make extern.
1214
1215 2015-05-15  Joel Brobecker  <brobecker@adacore.com>
1216
1217         * ada-lang.c (ada_value_primitive_packed_val): Make sure
1218         accumSize is never negative.
1219
1220 2015-05-14  Patrick Palka  <patrick@parcs.ath.cx>
1221
1222         * tui/tui-command.c: Remove include of <ctype.h>.
1223         (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
1224
1225 2015-05-13  Martin Galvan  <martin.galvan@tallertechnologies.com>
1226
1227         * dwarf2read.c (die_needs_namespace): Return 1 for
1228         DW_TAG_inlined_subroutine.
1229
1230 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1231
1232         * regcache.c (regcache_cpy_no_passthrough): New declaration.
1233         (regcache_cpy_no_passthrough): Make it static, add function comment.
1234         * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
1235         (regcache_cpy_no_passthrough): Remove declaration.
1236
1237 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1238
1239         * gdbthread.h (struct thread_control_state): Update comment for
1240         proceed_to_finish.
1241         * infcall.c (run_inferior_call): Update comment about
1242         proceed_to_finish.
1243         * infcmd.c (get_return_value): Update comment about stop_registers.
1244         (finish_forward): Update comment about proceed_to_finish.
1245         * infrun.c (stop_registers): Remove.
1246         (clear_proceed_status, normal_stop): Remove stop_registers handling.
1247         * infrun.h (stop_registers): Remove.
1248
1249 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1250
1251         * infcall.c (struct dummy_frame_context_saver)
1252         (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
1253         (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1254         (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1255         New.
1256         (call_function_by_hand_dummy): Move discard_cleanups of
1257         inf_status_cleanup before dummy_frame_push.  Call
1258         dummy_frame_context_saver_setup and prepare context_saver_cleanup.
1259         Use dummy_frame_context_saver_get_regs instead of stop_registers.
1260         * infcall.h (struct dummy_frame_context_saver)
1261         (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1262         (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1263         New declarations.
1264         * infcmd.c: Include infcall.h.
1265         (get_return_value): Add parameter ctx_saver, use it instead of
1266         stop_registers.
1267         (print_return_value): Add parameter ctx_saver, pass it.
1268         (struct finish_command_continuation_args): Add field ctx_saver.
1269         (finish_command_continuation): Update print_return_value caller.
1270         (finish_command_continuation_free_arg): Free also ctx_saver.
1271         (finish_forward): Call dummy_frame_context_saver_setup.
1272         * inferior.h (struct dummy_frame_context_saver): New declaration.
1273         (get_return_value): Add parameter ctx_saver.
1274         * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
1275         get_return_value caller.
1276
1277 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1278
1279         * dummy-frame.c (struct dummy_frame_dtor_list): New.
1280         (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
1281         (remove_dummy_frame): Process dtor_list.
1282         (pop_dummy_frame): Process dtor_list.
1283         (register_dummy_frame_dtor): Maintain dtor_list.
1284         (find_dummy_frame_dtor): Handle dtor_list.
1285         * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
1286         Update comments.
1287
1288 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1289
1290         * compile/compile-object-run.c (do_module_cleanup): Add parameter
1291         registers_valid.
1292         (compile_object_run): Update do_module_cleanup caller.
1293         * dummy-frame.c: Include infcall.h.
1294         (struct dummy_frame): Update dtor comment.
1295         (remove_dummy_frame): Call dtor.
1296         (pop_dummy_frame): Update dtor caller.
1297         * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
1298         registers_valid.
1299
1300 2015-05-13  Joel Brobecker  <brobecker@adacore.com>
1301
1302         GDB 7.9.1 released.
1303
1304 2015-05-13  Joel Brobecker  <brobecker@adacore.com>
1305
1306         * NEWS: Create "Changes in GDB 7.9.1" section.  Move news about
1307         Xmethods now being able to specify a result type to that new
1308         sectioin.
1309
1310 2015-05-13  Patrick Palka  <patrick@parcs.ath.cx>
1311
1312         * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
1313         first before resizing the window.
1314         * tui/tui.c (tui_enable): Likewise.
1315
1316 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1317
1318         * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
1319         * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
1320         * infcall.c (call_function_by_hand_dummy): Use proper typedef for
1321         dummy_dtor parameter.
1322         * infcall.h: Include dummy-frame.h.
1323         (call_function_by_hand_dummy_dtor_ftype): Remove.
1324         (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
1325         parameter.
1326
1327 2015-05-13  Patrick Palka  <patrick@parcs.ath.cx>
1328
1329         PR gdb/17820
1330         * top.c (history_size_setshow_var): Change type to signed.
1331         Initialize to -2.  Update documentation.
1332         (set_readline_history_size): Define.
1333         (set_history_size_command): Use it.  Remove logic for handling
1334         out-of-range sizes.
1335         (init_history): Use set_readline_history_size().  Test for a
1336         value of -2 instead of 0 when determining whether to set a
1337         default history size.
1338         (init_main): Decode the argument of the "size" command as a
1339         zuinteger_unlimited.
1340
1341 2015-05-12  Doug Evans  <dje@google.com>
1342
1343         * dwarf2read.c (struct file_entry): Tweak comments.
1344         (get_debug_line_section): Tweak comments.
1345
1346 2015-05-12  Don Breazeal  <donb@codesourcery.com>
1347
1348         * NEWS: Announce fork support in the RSP and support
1349         for fork debugging in extended mode.
1350
1351 2015-05-12  Don Breazeal  <donb@codesourcery.com>
1352
1353         * remote.c (remote_insert_fork_catchpoint): New function.
1354         (remote_remove_fork_catchpoint): New function.
1355         (remote_insert_vfork_catchpoint): New function.
1356         (remote_remove_vfork_catchpoint): New function.
1357         (pending_fork_parent_callback): New function.
1358         (remove_new_fork_child): New function.
1359         (remote_update_thread_list): Call remote_notif_get_pending_events
1360         and remove_new_fork_child.
1361         (extended_remote_kill): Kill fork child when killing the
1362         parent before follow_fork completes.
1363         (init_extended_remote_ops): Initialize target vector with
1364         new fork catchpoint functions.
1365
1366 2015-05-12  Don Breazeal  <donb@codesourcery.com>
1367
1368         * remote.c (remove_vfork_event_p): New function.
1369         (remote_follow_fork): Add vfork event type to event checking.
1370         (remote_parse_stop_reply): New stop reasons "vfork" and
1371         "vforkdone" for RSP 'T' Stop Reply Packet.
1372
1373 2015-05-12  Don Breazeal  <donb@codesourcery.com>
1374
1375         * linux-nat.c (linux_nat_ptrace_options): New function.
1376         (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
1377         Call linux_nat_ptrace_options and use different argument to
1378         linux_enable_event_reporting.
1379         (_initialize_linux_nat): Delete call to
1380         linux_ptrace_set_additional_flags.
1381         * nat/linux-ptrace.c (current_ptrace_options): Rename to
1382         supported_ptrace_options.
1383         (additional_flags): Delete variable.
1384         (linux_check_ptrace_features): Use supported_ptrace_options.
1385         (linux_test_for_tracesysgood, linux_test_for_tracefork):
1386         Likewise, and remove additional_flags check.
1387         (linux_enable_event_reporting): Change 'attached' argument to
1388         'options'.  Use supported_ptrace_options.
1389         (ptrace_supports_feature): Change comment.  Use
1390         supported_ptrace_options.
1391         (linux_ptrace_set_additional_flags): Delete function.
1392         * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
1393         Delete function prototype.
1394         * remote.c (remote_fork_event_p): New function.
1395         (remote_detach_pid): New function.
1396         (remote_detach_1): Call remote_detach_pid, don't mourn inferior
1397         if doing detach-on-fork.
1398         (remote_follow_fork): New function.
1399         (remote_parse_stop_reply): Handle new "T" stop reason "fork".
1400         (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
1401         (init_extended_remote_ops): Initialize to_follow_fork.
1402
1403 2015-05-12  Don Breazeal  <donb@codesourcery.com>
1404
1405         * nat/linux-ptrace.c (linux_check_ptrace_features): Change
1406         from static to extern.
1407         * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
1408         * remote.c (anonymous enum): <PACKET_fork_event_feature,
1409         * PACKET_vfork_event_feature>: New enumeration constants.
1410         (remote_protocol_features): Add table entries for new packets.
1411         (remote_query_supported): Add new feature queries to qSupported
1412         packet.
1413
1414 2015-05-12  Gary Benson <gbenson@redhat.com>
1415
1416         * remote.c (remote_add_inferior): Call exec_file_locate_attach
1417         for fake PIDs as well as real ones.
1418         (remote_pid_to_exec_file): Send empty annex if PID is fake.
1419
1420 2015-05-09  Siva Chandra Reddy  <sivachandra@google.com>
1421
1422         * NEWS (Python Scripting): Mention the new gdb.Value methods.
1423         * python/py-value.c (valpy_reference_value): New function.
1424         (valpy_const_value): Likewise.
1425         (value_object_methods): Add new methods.
1426         * value.c (make_cv_value): New function.
1427         * value.h (make_cv_value): Declare.
1428
1429 2015-05-08  Yao Qi  <yao@codesourcery.com>
1430             Sandra Loosemore  <sandra@codesourcery.com>
1431
1432         * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
1433         to 'lh->include_dirs' before accessing to it.
1434         (psymtab_include_file_name): Likewise.
1435         (dwarf_decode_lines_1): Likewise.
1436         (dwarf_decode_lines): Likewise.
1437         (file_file_name): Likewise.
1438
1439 2015-05-08  Sandra Loosemore  <sandra@codesourcery.com>
1440
1441         * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
1442         (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
1443         (nios2_linux_rt_sigreturn_init): Adjust base address of
1444         register save area.
1445
1446 2015-05-08  Sandra Loosemore  <sandra@codesourcery.com>
1447
1448         * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
1449         "trap 31" as the breakpoint instruction on all targets.
1450
1451 2015-05-08  Jan Kratochvil  <jan.kratochvil@redhat.com>
1452
1453         * infcmd.c (print_return_value): Remove unused declaration.
1454
1455 2015-05-08  Joel Brobecker  <brobecker@adacore.com>
1456
1457         * dwarf2read.c (attr_to_dynamic_prop)
1458         <DW_AT_data_member_location>: Use read_type_die isntead of
1459         get_die_type.
1460
1461 2015-05-08  Joel Brobecker  <brobecker@adacore.com>
1462
1463         * ada-lang.c (ada_convert_actual): Add handling of formals
1464         passed inside an aligner type.
1465
1466 2015-05-08  Joel Brobecker  <brobecker@adacore.com>
1467
1468         * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
1469
1470 2015-05-08  Siva Chandra Reddy  <sivachandra@google.com>
1471
1472         PR python/18291
1473         * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
1474         Print xmethod matcher status.
1475
1476 2015-05-08  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1477
1478         * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
1479         register in the regcache when treating the PSWM register, and vice
1480         versa.
1481
1482 2015-05-07  Gary Benson <gbenson@redhat.com>
1483
1484         * linux-thread-db.c (struct thread_db_info)
1485         <td_ta_map_id2thr_p>: Remove field.
1486         (try_thread_db_load_1): Remove initialization for the above.
1487
1488 2015-05-07  Gary Benson <gbenson@redhat.com>
1489
1490         * linux-thread-db.c (struct thread_db_info)
1491         <td_thr_validate_p>: Remove field.
1492         (try_thread_db_load_1): Remove initialization for the above.
1493
1494 2015-05-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
1495
1496         * compile/compile-object-load.c (compile_object_load): Support
1497         mst_text_gnu_ifunc.
1498
1499 2015-05-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
1500
1501         * compile/compile.c (compile_to_object): Make the cmd_string parameter
1502         const.  Use new variables for the const compatibility.
1503         (eval_compile_command): Make the cmd_string parameter const.
1504         * compile/compile.h (eval_compile_command): Make the cmd_string
1505         parameter const.
1506
1507 2015-05-06  Joel Brobecker  <brobecker@adacore.com>
1508
1509         * defs.h (deprecated_init_ui_hook): Delete.  Remove associated
1510         comment.
1511         * top.c (deprecated_init_ui_hook): Delete.
1512         (gdb_init): Remove handling of deprecated_init_ui_hook.
1513         * interps.c (clear_interpreter_hooks): Remove handling of
1514         deprecated_init_ui_hook.
1515         * main.c (captured_main): Update comment.
1516
1517 2015-05-06  Joel Brobecker  <brobecker@adacore.com>
1518
1519         * solib.c (_initialize_solib): Add "info dll" alias creation.
1520         * windows-nat.c (set_windows_aliases): Delete.
1521         (_initialize_windows_nat): Remove deprecated_init_ui_hook
1522         assignment.
1523         * NEWS: Add news entry about "info dll" now being available
1524         on all platforms.
1525
1526 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1527
1528         * ada-lang.c (value_assign_to_component): Reformat and improve
1529         documentation. Remove all trailing spaces.
1530
1531 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1532
1533         * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
1534         Stop counting inlined frames as soon as an out-of-line function
1535         is found.
1536
1537 2014-05-05  Pierre-Marie de Rodat  <derodat@adacore.com>
1538
1539         * dwarf2read.c (inherit_abstract_dies): Skip
1540         DW_TAG_GNU_call_site dies while inheriting children of an
1541         abstract DIE into a scope.
1542         (read_lexical_block_scope): Inherit abstract DIE's for
1543         lexical scopes.
1544
1545 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1546
1547         * ada-valprint.c (val_print_packed_array_elements): Delete
1548         variable "len".  Add a type-length check when comparing two
1549         consecutive elements of the array.  Use the element's actual
1550         length in call to value_contents_eq.
1551         * ada-lang.c (ada_value_primitive_packed_val): Always return
1552         a value whose type has been resolved.
1553
1554 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1555
1556         * ada-lang.c (ada_value_primitive_packed_val): Recompute
1557         BIT_SIZE and LEN if the size of the resolved type is smaller
1558         than BIT_SIZE * HOST_CHAR_BIT.
1559
1560 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1561
1562         * ada-lang.c (ada_value_primitive_packed_val): Use a more
1563         correct address in call to value_at.  Adjust call to
1564         value_address accordingly.
1565
1566 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1567
1568         * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
1569         to print it.
1570
1571 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1572
1573         * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
1574         * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
1575         pinfo->valaddr.
1576         * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
1577         * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
1578         (resolve_dynamic_type_internal): Set pinfo.valaddr.
1579         Add handling of addr_stack->valaddr.
1580         (resolve_dynamic_type): Add "valaddr" parameter.
1581         Set pinfo.valaddr field.
1582         * ada-lang.c (ada_discrete_type_high_bound): Update call to
1583         resolve_dynamic_type.
1584         (ada_discrete_type_low_bound): Likewise.
1585         * findvar.c (default_read_var_value): Likewise.
1586         * value.c (value_from_contents_and_address): Likewise.
1587
1588 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1589
1590         * gdbtypes.c (resolve_dynamic_array): Use
1591         create_array_type_with_stride instead of create_array_type.
1592
1593 2015-04-30  DJ Delorie  <dj@redhat.com>
1594
1595         * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
1596         rl78_decode_opcode
1597
1598 2015-04-29  Doug Evans  <dje@google.com>
1599
1600         PR python/18285
1601         * NEWS: Document new gdb.XMethodWorker.get_result_type method.
1602         * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
1603         EVAL_AVOID_SIDE_EFFECTS for xmethods.
1604         * extension-priv.h (struct extension_language_ops)
1605         <get_xmethod_result_type>: New member.
1606         * extension.c (get_xmethod_result_type): New function.
1607         * extension.h (get_xmethod_result_type): Declare.
1608         * python/py-xmethods.c (get_result_type_method_name): New static
1609         global.
1610         (py_get_result_type_method_name): Ditto.
1611         (gdbpy_get_xmethod_result_type): New function.
1612         (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
1613         * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
1614         * python/python.c (python_extension_ops): Add
1615         gdbpy_get_xmethod_result_type.
1616         * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
1617         * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
1618         xmethods.
1619         (value_x_unop): Ditto.
1620         * value.c (result_type_of_xmethod): New function.
1621         * value.h (result_type_of_xmethod): Declare.
1622
1623 2015-04-29  Gary Benson <gbenson@redhat.com>
1624
1625         * solib.c (solib_find_1): Allow fd argument to be NULL.
1626         (exec_file_find): Update comment.
1627         (solib_find): Likewise.
1628         * exec.c (exec_file_locate_attach): Use NULL as fd
1629         argument to exec_file_find to avoid having to close
1630         the opened file.
1631         * infrun.c (follow_exec): Likewise.
1632
1633 2015-04-28  Doug Evans  <dje@google.com>
1634
1635         PR python/18299
1636         * python/lib/gdb/printing.py (register_pretty_printer): Handle
1637         name or __name__ attributes.  Handle gdb module as first argument.
1638
1639 2015-04-28  Doug Evans  <dje@google.com>
1640
1641         PR python/18089
1642         * python/py-prettyprint.c (print_children): Verify result of children
1643         iterator.  Provide better error message.
1644         * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
1645         * python/python.c (gdbpy_print_python_errors_p): New function.
1646
1647 2015-04-28  Doug Evans  <dje@google.com>
1648
1649         * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
1650
1651 2015-04-28  Sasha Smundak  <asmundak@google.com>
1652
1653         * NEWS: Mention gdb.Type.optimized_out method.
1654         * python/py-type.c (typy_optimized_out):  New function.
1655
1656 2015-04-28  John Baldwin  <jhb@FreeBSD.org>
1657
1658         * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
1659
1660 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1661
1662         * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
1663         (initialize_utils): Move call of init_page_info() to ...
1664         * top.c (gdb_init): ... here.
1665
1666 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1667
1668         * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
1669         (tui_sigwinch_handler): Still update our idea of
1670         the terminal's width and height even when TUI is not active.
1671
1672 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1673
1674         * utils.h (set_screen_width_and_height): Declare.
1675         * utils.c (set_screen_width_and_height): Define.
1676         * tui/tui-win.c (tui_update_gdb_sizes): Use it.
1677
1678 2015-04-28  Gary Benson <gbenson@redhat.com>
1679
1680         * infrun.c (solist.h): New include.
1681         (follow_exec): Use exec_file_find to prefix execd_pathname
1682         with gdb_sysroot.
1683
1684 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1685
1686         * tui/tui-source.c (tui_set_source_content): Avoid calling
1687         strcpy() when offset is 0.
1688
1689 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1690
1691         PR gdb/18155
1692         * tui/tui-data.c (tui_free_window): Don't free the locator
1693         window when passed an SRC_WIN or a DISASSEM_WIN.
1694
1695 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1696
1697         * tui/tui-data.h (struct tui_win_element): Forward-declare.
1698         (tui_win_content): Move declaration.
1699         (struct tui_gen_win_info): Give 'content' field the
1700         type tui_win_content.
1701         * tui/tui-data.c (init_content_element): Remove redundant and
1702         erroneous casts.
1703         (tui_add_content_elements): Remove erroneous cast.
1704         * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
1705         casts.
1706         (tui_get_begin_asm_address): Likewise.
1707         * tui/tui-regs.c (tui_show_registers): Likewise.
1708         (tui_show_register_group): Likewise.
1709         (tui_display_registers_from): Likewise.
1710         (tui_check_register_values): Likewise.
1711         * tui/tui-source.c (tui_set_source_content): Likewise.
1712         (tui_set_source_content_nil): Likewise.
1713         (tui_source_is_displayed): Likewise.
1714         * tui/tui-stack.c (tui_show_locator_content): Likewise.
1715         (tui_set_locator_fullname): Likewise.
1716         (tui_set_locator_info): Likewise.
1717         (tui_show_frame_info): Likewise.
1718         * tui/tui-winsource.c (tui_clear_source_content): Likewise.
1719         (tui_show_source_line): Likewise.
1720         (tui_horizontal_source_scroll): Likewise.
1721         (tui_update_breakpoint_info): Likewise.
1722         (tui_set_exec_info_content): Likewise.
1723         (tui_show_exec_info_content): Likewise.
1724         (tui_alloc_source_buffer): Likewise.
1725         (tui_line_is_displayed): Likewise.
1726         (tui_addr_is_displayed): Likewise.
1727
1728 2015-04-27  John Baldwin  <jhb@FreeBSD.org>
1729
1730         * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
1731         event if PL_FLAG_EXEC is set.
1732         [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
1733         [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
1734         (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
1735         "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
1736         Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
1737
1738 2015-04-27  John Baldwin  <jhb@FreeBSD.org>
1739
1740         * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
1741         [TDP_RFPPWAIT] New variable fbsd_pending_children.
1742         [TDP_RFPPWAIT] (fbsd_remember_child): New function.
1743         [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
1744         [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
1745         [PT_LWPINFO] (fbsd_wait): New function.
1746         [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
1747         [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
1748         [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
1749         [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
1750         [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
1751         [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
1752         [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
1753         [TDP_RFPPWAIT] (fbsd_post_attach): New function.
1754         (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
1755         "fbsd_wait".
1756         [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
1757         Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
1758         Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
1759         Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
1760         Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
1761         Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
1762         Set "to_post_attach" to "fbsd_post_attach".
1763
1764 2015-04-27  John Baldwin  <jhb@FreeBSD.org>
1765
1766         * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
1767         (fbsd_find_memory_regions): Mark static.
1768         (fbsd_nat_add_target): New function.
1769         * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
1770         fbsd_pid_to_exec_file and fbsd_find_memory_regions.
1771         * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
1772         * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
1773         * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
1774         * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
1775
1776 2015-04-27  Gary Benson <gbenson@redhat.com>
1777
1778         * objfiles.c (allocate_objfile): Do not attempt to expand name
1779         if name is a "target:" filename.
1780         * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
1781         to load auto-load scripts for objfiles with "target:" filenames.
1782
1783 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1784
1785         * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
1786         (enum s390_vector_abi_kind): New enum.
1787         (struct gdbarch_tdep)<vector_abi>: New field.
1788         (s390_effective_inner_type): Add parameter min_size.  Stop
1789         unwrapping if the inner type is smaller than min_size.
1790         (s390_function_arg_float): Adjust call to
1791         s390_effective_inner_type.
1792         (s390_function_arg_vector): New function.
1793         (s390_function_arg_integer): Adjust comment.
1794         (struct s390_arg_state)<vr>: New field.
1795         (s390_handle_arg): Add parameter 'is_unnamed'.  Pass vector
1796         arguments according to vector ABI when appropriate.
1797         (s390_push_dummy_call): Initialize the argument state's field
1798         'vr'.  Adjust calls to s390_handle_arg.
1799         (s390_register_return_value): Handle vector return values.
1800         (s390_return_value): Apply the "register" return value convention
1801         to a vector when appropriate.
1802         (s390_gdbarch_init): Initialize tdep->vector_abi.
1803         * NEWS: Announce S390 vector ABI support.
1804
1805 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1806
1807         * s390-linux-tdep.c (s390_return_value_convention): Remove
1808         function.  Inline its logic...
1809         (s390_return_value): ...here.  Instead, move the handling of the
1810         "register" return value convention...
1811         (s390_register_return_value): ...here.  New function.
1812
1813 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1814
1815         * s390-linux-tdep.c
1816         (is_float_singleton): Remove function.  Move the "singleton" part
1817         of the logic...
1818         (s390_effective_inner_type): ...here.  New function.
1819         (is_float_like): Remove function.  Inline its logic...
1820         (s390_function_arg_float): ...here.
1821         (is_pointer_like, is_integer_like, is_struct_like): Remove
1822         functions.  Inline their logic...
1823         (s390_function_arg_integer): ...here.
1824         (s390_function_arg_pass_by_reference): Remove function.
1825         (extend_simple_arg): Remove function.
1826         (alignment_of): Remove function.
1827         (struct s390_arg_state): New structure.
1828         (s390_handle_arg): New function.
1829         (s390_push_dummy_call): Move parameter placement logic to the new
1830         function s390_handle_arg.  Call it for calculating the stack area
1831         sizes first, and again for actually writing the parameters.
1832
1833 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1834
1835         * s390-linux-tdep.c (is_power_of_two): Add comment.  Return
1836           false if the argument is zero.
1837
1838 2015-04-27  Pierre-Marie de Rodat  <derodat@adacore.com>
1839
1840         * ada-lang.c (template_to_static_fixed_type): Return input type
1841         when it is already fixed.  Cache the input type itself when not
1842         creating a static fixed copy.  Make it explicit that we never
1843         molestate the input type.
1844         * gdbtypes.c (resolve_dynamic_struct): Reset the
1845         TYPE_TARGET_TYPE field for resolved copies.
1846
1847 2015-04-27  Joel Brobecker  <brobecker@adacore.com>
1848
1849         * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
1850         (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
1851         (template_to_static_fixed_type): Call ada_check_typedef only
1852         when necessary.
1853
1854 2015-04-24  Andrew Burgess  <andrew.burgess@embecosm.com>
1855
1856         * cli/cli-dump.c (srec_dump_command): Add internationalization
1857         mark ups.
1858         (ihex_dump_command): Likewise.
1859         (tekhex_dump_command): Likewise.
1860         (binary_dump_command): Likewise.
1861         (binary_append_command): Likewise.
1862
1863 2015-04-24  Andrew Burgess  <andrew.burgess@embecosm.com>
1864
1865         * cli/cli-dump.c (verilog_cmdlist): New variable.
1866         (dump_verilog_memory): New function.
1867         (dump_verilog_value): New function.
1868         (verilog_dump_command): New function.
1869         (_initialize_cli_dump): Add new commands to support verilog dump
1870         format.
1871         * NEWS: Add entry for "dump verilog".
1872
1873 2015-04-24  Pierre-Marie de Rodat  <derodat@adacore.com>
1874
1875         * gdbtypes.c (print_gnat_stuff): Do not recurse on the
1876         descriptive type when there is none.
1877
1878 2015-04-23  Patrick Palka  <patrick@parcs.ath.cx>
1879
1880         * tui/tui-win.c (tui_async_resize_screen): Call
1881         rl_resize_terminal().
1882
1883 2015-04-22  Jon Turney  <jon.turney@dronecode.org.uk>
1884
1885         * windows-nat.c (handle_output_debug_string): Don't change
1886         current_event.dwThreadId.
1887         (get_windows_debug_event): Use thread_id, rather than relying on
1888         current_event.dwThreadId being changed.
1889
1890 2015-04-22  Jon Turney  <jon.turney@dronecode.org.uk>
1891
1892         * windows-nat.c (windows_continue): Report an error if
1893         ContinueDebugEvent() fails.
1894
1895 2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>
1896
1897         * windows-nat.c (windows_resume): Fix misspelling in debug output.
1898
1899 2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>
1900
1901         * windows-nat.c (get_windows_debug_event): Replace retval with
1902         thread_id throughout.  Update stale comment.
1903
1904 2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>
1905
1906         * windows-nat.c (get_windows_debug_event): Don't use ternary
1907         conditional operator.
1908
1909 2015-04-21  Pierre Muller  <muller@sourceware.org>
1910
1911         PR pascal/17815
1912         p-exp.y (yylex): Reorganize code to return the matched pattern
1913         for a field of this.
1914
1915 2015-04-21  Gary Benson <gbenson@redhat.com>
1916
1917         * common/fileio.h (fileio_to_host_openflags): New declaration.
1918         * common/fileio.c (fcntl.h): New include.
1919         (fileio_to_host_openflags): New function, factored out from...
1920         * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
1921         Single use updated.
1922
1923 2015-04-21  Kevin Buettner  <kevinb@redhat.com>
1924
1925         * rl78-tdep.c (RL78_SP_ADDR): Define.
1926         (opc_reg_to_gdb_regnum): New static function.
1927         (rl78_analyze_prologue): Recognize instructions forming slightly
1928         more interesting prologues.
1929
1930 2015-04-20  Pierre-Marie de Rodat  <derodat@adacore.com>
1931
1932         Revert:
1933         2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
1934         * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
1935         TYPE_CODE_REF types so that they are not considered as dynamic
1936         depending on the referenced type.
1937         (resolve_dynamic_type_internal): Likewise.
1938
1939 2015-04-20  Pierre-Marie de Rodat  <derodat@adacore.com>
1940
1941         Revert:
1942         2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
1943         * gdbtypes.c (is_dynamic_type_internal): Remove the unused
1944         "top_level" parameter.
1945         (resolve_dynamic_type_internal): Remove the unused "top_level"
1946         parameter.  Update call to is_dynamic_type_internal.
1947         (is_dynamic_type): Update call to is_dynamic_type_internal.
1948         (resolve_dynamic_range): Update call to
1949         resolve_dynamic_type_internal.
1950         (resolve_dynamic_union): Likewise.
1951         (resolve_dynamic_struct): Likewise.
1952         (resolve_dynamic_type): Likewise.
1953
1954 2015-04-19  Gabriel Krisman Bertazi  <gabriel@krisman.be>
1955
1956         * breakpoint.c (update_dprintf_command_list): Remove duplicated
1957         xmalloc.
1958
1959 2015-04-20  Thomas Schwinge  <thomas@codesourcery.com>
1960
1961         * reply_mig_hack.awk: Robustify parsing.
1962
1963         * reply_mig_hack.awk: Don't bother to declare an intermediate
1964         function pointer variable.
1965
1966 2015-04-17  Doug Evans  <dje@google.com>
1967
1968         * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
1969         to "exec_displacement" to avoid confusion with inner use of the name.
1970
1971 2015-04-17  Pedro Alves  <palves@redhat.com>
1972
1973         * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
1974         if HW point of TYPE isn't supported.
1975
1976 2015-04-17  Yao Qi  <yao.qi@linaro.org>
1977             Pedro Alves  <palves@redhat.com>
1978
1979         * target.h (target_can_use_hardware_watchpoint): Update comments.
1980         Remove trailing ";".
1981
1982 2015-04-17  Gary Benson <gbenson@redhat.com>
1983
1984         * remote.c (remote_add_inferior): New argument try_open_exec.
1985         If nonzero, attempt to open the inferior's executable file as
1986         the main executable if no main executable is open already.
1987         All callers updated.
1988         * NEWS: Mention that GDB now supports automatic location and
1989         retrieval of executable + files from remote targets.
1990
1991 2015-04-17  Gary Benson <gbenson@redhat.com>
1992
1993         * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
1994         * remote.c (PACKET_qXfer_exec_file): Likewise.
1995         (remote_protocol_features): Register the
1996         "qXfer:exec-file:read" feature.
1997         (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
1998         (remote_pid_to_exec_file): New function.
1999         (init_remote_ops): Initialize to_pid_to_exec_file.
2000         (_initialize_remote): Register new "set/show remote
2001         pid-to-exec-file-packet" command.
2002         * NEWS: Announce new qXfer:exec-file:read packet.
2003
2004 2015-04-17  Gary Benson <gbenson@redhat.com>
2005
2006         * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
2007         New declaration.
2008         * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
2009         New function, factored out from...
2010         * linux-nat.c (linux_child_pid_to_exec_file): ...here.
2011
2012 2015-04-17  Gary Benson <gbenson@redhat.com>
2013
2014         * exec.c (solist.h): New include.
2015         (exec_file_locate_attach): Prefix absolute executable
2016         paths with gdb_sysroot if set.
2017         * NEWS: Mention that executable paths may be prepended
2018         with sysroot.
2019
2020 2015-04-17  Gary Benson <gbenson@redhat.com>
2021
2022         * solist.h (exec_file_find): New declaration.
2023         * solib.c (solib_find_1): New function, factored out from...
2024         (solib_find): ...here.
2025         (exec_file_find): New function.
2026
2027 2015-04-17  Gary Benson <gbenson@redhat.com>
2028
2029         * gdbcore.h (exec_file_locate_attach): New declaration.
2030         * exec.c (exec_file_locate_attach): New function, factored
2031         out from...
2032         * infcmd.c (attach_command_post_wait): ...here.
2033
2034 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
2035
2036         * MAINTAINERS: Add myself for Blackfin/write-after-approval.
2037
2038 2015-04-16  Yao Qi  <yao.qi@linaro.org>
2039
2040         * infrun.c (maybe_software_singlestep): Declare.
2041         (displaced_step_fixup): Call maybe_software_singlestep.
2042
2043 2015-04-15  Doug Evans  <dje@google.com>
2044
2045         * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
2046
2047 2015-04-15  Doug Evans  <dje@google.com>
2048
2049         * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
2050
2051 2015-04-15  Simon Marchi  <simon.marchi@ericsson.com>
2052
2053         * python/lib/gdb/command/unwinders.py: Add parentheses.
2054
2055 2015-04-15  Yao Qi  <yao.qi@linaro.org>
2056
2057         * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
2058
2059 2015-04-15  Yao Qi  <yao.qi@linaro.org>
2060
2061         * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
2062
2063 2015-04-15  Yao Qi  <yao.qi@linaro.org>
2064
2065         * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
2066         dsc->insn_size instead of 4.
2067
2068 2015-04-14  Gary Benson <gbenson@redhat.com>
2069
2070         * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
2071         * minidebug.c (lzma_stat): Likewise.
2072         * solib-spu.c (spu_bfd_iovec_stat): Likewise.
2073         * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
2074
2075 2015-04-13  Stan Shebs  <stanshebs@google.com>
2076
2077         * MAINTAINERS: Update my email address.
2078
2079 2015-04-13  John Baldwin  <jhb@FreeBSD.org>
2080
2081         * amd64-tdep.c (amd64_target_description): New function.
2082         * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
2083         * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
2084         (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
2085         x86 extended save area.
2086         (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
2087         * amd64bsd-nat.h: Export amd64bsd_xsave_len.
2088         * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
2089         (_initialize_amd64fbsd_nat): Set "to_read_description" to
2090         "amd64fbsd_read_description".
2091         * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
2092         (amd64fbsd_supply_xstateregset): New function.
2093         (amd64fbsd_collect_xstateregset): New function.
2094         Add "amd64fbsd_xstateregset".
2095         (amd64fbsd_iterate_over_regset_sections): New function.
2096         (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
2097         "I386_FBSD_XSAVE_XCR0_OFFSET".
2098         Add "iterate_over_regset_sections" gdbarch method.
2099         Add "core_read_description" gdbarch method.
2100         * i386-tdep.c (i386_target_description): New function.
2101         * i386-tdep.h: Export i386_target_description and tdesc_i386.
2102         * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
2103         (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
2104         x86 extended save area.
2105         (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
2106         * i386bsd-nat.h: Export i386bsd_xsave_len.
2107         * i386fbsd-nat.c (i386fbsd_read_description): New function.
2108         (_initialize_i386fbsd_nat): Set "to_read_description" to
2109         "i386fbsd_read_description".
2110         * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
2111         (i386fbsd_core_read_description): New function.
2112         (i386fbsd_supply_xstateregset): New function.
2113         (i386fbsd_collect_xstateregset): New function.
2114         Add "i386fbsd_xstateregset".
2115         (i386fbsd_iterate_over_regset_sections): New function.
2116         (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
2117         "I386_FBSD_XSAVE_XCR0_OFFSET".
2118         Add "iterate_over_regset_sections" gdbarch method.
2119         Add "core_read_description" gdbarch method.
2120         * i386fbsd-tdep.h: New file.
2121
2122 2015-04-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
2123
2124         * NEWS (Changes since GDB 7.9): Add removed -xdb.
2125         * breakpoint.c (command_line_is_silent): Remove xdb_commands
2126         conditional.
2127         (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
2128         and lb.
2129         * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
2130         va.
2131         * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
2132         conditional.
2133         * defs.h (xdb_commands): Remove declaration.
2134         * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
2135         * guile/scm-cmd.c (command_classes): Remove xdb from comment.
2136         * infcmd.c (run_no_args_command, go_command): Remove.
2137         (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
2138         * infrun.c (xdb_handle_command): Remove.
2139         (_initialize_infrun): Remove xdb_commands for lz and z.
2140         * main.c (xdb_commands): Remove variable.
2141         (captured_main): Remove "xdb" from long_options.
2142         (print_gdb_help): Remove --xdb from help.
2143         * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
2144         * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
2145         * stack.c (backtrace_full_command, args_plus_locals_info)
2146         (current_frame_command): Remove.
2147         (_initialize_stack): Remove xdb_commands for t, T and l.
2148         * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
2149         * thread.c (_initialize_thread): Remove xdb_commands condition.
2150         * tui/tui-layout.c (tui_toggle_layout_command)
2151         (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
2152         (_initialize_tui_layout): Remove xdb_commands for td and ts.
2153         * tui/tui-regs.c (tui_scroll_regs_forward_command)
2154         (tui_scroll_regs_backward_command): Remove.
2155         (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
2156         * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
2157         (_initialize_tui_win): Remove xdb_commands for U and w.
2158         * utils.c (pagination_on_command, pagination_off_command): Remove.
2159         (initialize_utils): Remove xdb_commands for am and sm.
2160
2161 2015-04-10  Pedro Alves  <palves@redhat.com>
2162
2163         * infrun.c (displaced_step_fixup): Switch to the event ptid
2164         earlier.  If the thread stopped for a watchpoint and the
2165         target/arch has non-continuable watchpoints, cancel the displaced
2166         step.
2167         (resume): Don't start a displaced step if in-line step-over info
2168         is valid.
2169
2170 2015-04-10  Pedro Alves  <palves@redhat.com>
2171
2172         * infrun.c (displaced_step_in_progress): New function.
2173         (do_target_resume): Advise target to report all signals if
2174         displaced stepping.
2175
2176 2015-04-10  Pedro Alves  <palves@redhat.com>
2177
2178         PR gdb/18216
2179         * infrun.c (process_event_stop_test): Don't assume a step-resume
2180         is set if tp->stepped_breakpoint is true.
2181
2182 2015-04-10  Yao Qi  <yao.qi@linaro.org>
2183
2184         * arm-tdep.c (install_alu_reg): Update comment.
2185         (thumb_copy_alu_reg): Remove local variable rn.  Update
2186         debugging message.  Use r2 instead of r1 in the modified
2187         instruction.
2188
2189 2015-04-10  Pedro Alves  <palves@redhat.com>
2190
2191         PR gdb/13858
2192         * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
2193         linux_displaced_step_location as gdbarch_displaced_step_location
2194         hook.
2195         * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
2196         * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
2197         * linux-tdep.c (linux_displaced_step_location): New function,
2198         based on ppc_linux_displaced_step_location.
2199         * linux-tdep.h (linux_displaced_step_location): New declaration.
2200         * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
2201         (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
2202         Delete.
2203         (ppc_linux_init_abi): Install linux_displaced_step_location as
2204         gdbarch_displaced_step_location hook, even without Cell/B.E..
2205         (_initialize_ppc_linux_tdep): Don't install
2206         ppc_linux_inferior_created as inferior_created observer.
2207         * s390-linux-tdep.c (s390_gdbarch_init): Install
2208         linux_displaced_step_location as gdbarch_displaced_step_location
2209         hook.
2210
2211 2015-04-09  Gary Benson <gbenson@redhat.com>
2212
2213         * common/common-remote-fileio.h: Rename to...
2214         * common/fileio.h: ...this.  Update all references.
2215         (remote_fileio_to_fio_error): Rename to...
2216         (host_to_fileio_error): ...this.
2217         (remote_fileio_to_be): Rename to...
2218         (host_to_bigendian): ...this.  Update all callers.
2219         (remote_fileio_to_fio_uint): Rename to...
2220         (host_to_fileio_uint): ...this.  Update all callers.
2221         (remote_fileio_to_fio_time): Rename to...
2222         (host_to_fileio_time): ...this.  Update all callers.
2223         (remote_fileio_to_fio_stat): Rename to...
2224         (host_to_fileio_stat): ...this.
2225         Update all references.
2226         * common/common-remote-fileio.c: Rename to...
2227         * common/fileio.c: ...this.  Update all references.
2228         (remote_fileio_to_fio_error): Rename to...
2229         (host_to_fileio_error): ...this.  Update all callers.
2230         (remote_fileio_mode_to_target): Rename to...
2231         (fileio_mode_pack): ...this.  Update all callers.
2232         (remote_fileio_to_fio_mode): Rename to...
2233         (host_to_fileio_mode): ...this.  Update all callers.
2234         (remote_fileio_to_fio_ulong): Rename to...
2235         (host_to_fileio_ulong): ...this.  Update all callers.
2236         (remote_fileio_to_fio_stat): Rename to...
2237         (host_to_fileio_stat): ...this.  Update all callers.
2238
2239 2015-04-09  Andy Wingo  <wingo@igalia.com>
2240
2241         * guile/scm-frame.c (gdbscm_frame_read_register): New function.
2242         (frame_functions): Bind gdbscm_frame_read_register to
2243         frame-read-register.
2244         * guile/lib/gdb.scm (frame-read-register): Export.
2245
2246 2015-04-09  Gary Benson <gbenson@redhat.com>
2247
2248         * common/common-remote-fileio.h (remote_fileio_to_fio_error):
2249         New declaration.
2250         * common/common-remote-fileio.c (remote_fileio_to_fio_error):
2251         New function, factored out the named functions below.
2252         * inf-child.c (gdb/fileio.h): Remove include.
2253         (common-remote-fileio.h): New include.
2254         (inf_child_errno_to_fileio_error): Remove function.  Update
2255         all callers to use remote_fileio_to_fio_error.
2256         * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
2257
2258 2015-04-09  Andy Wingo  <wingo@igalia.com>
2259
2260         * MAINTAINERS (Write After Approval): Add Andy Wingo.
2261
2262 2015-04-09  H.J. Lu  <hongjiu.lu@intel.com>
2263
2264         * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
2265         Replace $zlibdir with $ZLIBDIR in LDFLAGS.
2266         * configure: Regenerated.
2267
2268 2015-04-09  Pedro Alves  <palves@redhat.com>
2269
2270         * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
2271         * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
2272         * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
2273         * gnulib/import/Makefile.am: Update.
2274         * gnulib/import/Makefile.in: Update.
2275         * gnulib/import/m4/gnulib-cache.m4: Update.
2276         * gnulib/import/m4/gnulib-comp.m4: Update.
2277         * gnulib/import/m4/strtok_r.m4: New file.
2278         * gnulib/import/strtok_r.c: New file.
2279
2280 2015-04-09  Pedro Alves  <palves@redhat.com>
2281
2282         * gnulib/update-gnulib.sh (aclocal version check): Filter out
2283         "called too early to check prototype".
2284
2285 2015-04-08  Sergio Durigan Junior  <sergiodj@redhat.com>
2286
2287         PR python/16699
2288         * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
2289         use a caching mechanism.  Adjust comments and code to reflect
2290         that.  Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
2291         (cmdpy_completer_handle_brkchars): Adjust call to
2292         cmdpy_completer_helper.  Call Py_XDECREF for 'resultobj'.
2293         (cmdpy_completer): Likewise.
2294
2295 2015-04-08  Yao Qi  <yao.qi@linaro.org>
2296
2297         * spu-tdep.c (spu_gdbarch_init): Don't call
2298         set_gdbarch_cannot_step_breakpoint.
2299
2300 2015-04-07  Sergio Durigan Junior  <sergiodj@redhat.com>
2301
2302         * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
2303
2304 2015-04-07  Pedro Alves  <palves@redhat.com>
2305
2306         * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
2307         (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
2308         (delete_exited_threads): New declaration.
2309         * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
2310         * linux-nat.c (linux_nat_update_thread_list): New function.
2311         (linux_nat_add_target): Install it.
2312         * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
2313         * thread.c (prune_threads): Use ALL_THREADS_SAFE.
2314         (delete_exited_threads): New function.
2315
2316 2015-04-07  Pedro Alves  <pedro@codesourcery.com>
2317
2318         * infrun.c (resume) <displaced stepping debug output>: Get the
2319         leader thread's regcache, not resume_ptid's.
2320
2321 2015-04-06  Doug Evans  <xdje42@gmail.com>
2322
2323         * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
2324         VAR_DOMAIN.
2325         (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
2326         Include symbol domain in debugging output.
2327
2328 2015-04-06  Pedro Alves  <palves@redhat.com>
2329             Bernd Edlinger  <bernd.edlinger@hotmail.de>
2330
2331         * configure.ac: Remove the mingw32-specific stub-termcap.o
2332         fallback, and instead fallback to the stub termcap on all hosts.
2333         * configure: Regenerate.
2334         * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
2335         symbols.
2336
2337 2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
2338
2339         * gdbtypes.c (is_dynamic_type_internal): Remove the unused
2340         "top_level" parameter.
2341         (resolve_dynamic_type_internal): Remove the unused "top_level"
2342         parameter.  Update call to is_dynamic_type_internal.
2343         (is_dynamic_type): Update call to is_dynamic_type_internal.
2344         (resolve_dynamic_range): Update call to
2345         resolve_dynamic_type_internal.
2346         (resolve_dynamic_union): Likewise.
2347         (resolve_dynamic_struct): Likewise.
2348         (resolve_dynamic_type): Likewise.
2349
2350 2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
2351
2352         * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
2353         TYPE_CODE_REF types so that they are not considered as dynamic
2354         depending on the referenced type.
2355         (resolve_dynamic_type_internal): Likewise.
2356
2357 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
2358
2359         * Makefile.in (top_srcdir): New.
2360         * configure: Regenerated.
2361
2362 2015-04-02  Gary Benson <gbenson@redhat.com>
2363
2364         * NEWS: Announce the new default sysroot of "target:".
2365
2366 2015-04-02  Gary Benson <gbenson@redhat.com>
2367
2368         * main.c (captured_main): Set gdb_sysroot to "target:"
2369         if not otherwise set.
2370
2371 2015-04-02  Gary Benson <gbenson@redhat.com>
2372
2373         * exec.c (exec_file_attach): Support "target:" filenames.
2374
2375 2015-04-02  Gary Benson <gbenson@redhat.com>
2376
2377         * solib.c (solib_find): Strip "target:" prefix from sysroot
2378         if accessing local files.
2379
2380 2015-04-02  Gary Benson <gbenson@redhat.com>
2381
2382         * symfile.c (symfile_bfd_open): Reorder to remove duplicated
2383         checks and error messages.
2384
2385 2015-04-02  Gary Benson <gbenson@redhat.com>
2386
2387         * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
2388         (remote_filename_p): Remove declaration.
2389         (remote_bfd_open): Likewise.
2390         * remote.c (remote_bfd_iovec_open): Remove function.
2391         (remote_bfd_iovec_close): Likewise.
2392         (remote_bfd_iovec_pread): Likewise.
2393         (remote_bfd_iovec_stat): Likewise.
2394         (remote_filename_p): Likewise.
2395         (remote_bfd_open): Likewise.
2396         * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
2397         * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
2398         (gdb_bfd_open_maybe_remote): Remove function.
2399         (symfile_bfd_open):  Replace remote filename check with
2400         target filename check.
2401         (reread_symbols): Use gdb_bfd_open.
2402         * build-id.c (gdbcore.h): New include.
2403         (build_id_to_debug_bfd): Use gdb_bfd_open.
2404         * infcmd.c (attach_command_post_wait): Remove remote filename
2405         check.
2406         * solib.c (solib_find): Replace remote-specific handling with
2407         target-specific handling.  Update comments where necessary.
2408         (solib_bfd_open): Replace remote-specific handling with
2409         target-specific handling.
2410         (gdb_sysroot_changed): New function.
2411         (_initialize_solib): Call the above when gdb_sysroot changes.
2412         * windows-tdep.c (gdbcore.h): New include.
2413         (windows_xfer_shared_library): Use gdb_bfd_open.
2414
2415 2015-04-02  Gary Benson <gbenson@redhat.com>
2416
2417         * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
2418         (is_target_filename): New declaration.
2419         (gdb_bfd_has_target_filename): Likewise.
2420         (gdb_bfd_open): Update documentation comment.
2421         * gdb_bfd.c (target.h): New include.
2422         (gdb/fileio.h): Likewise.
2423         (is_target_filename): New function.
2424         (gdb_bfd_has_target_filename): Likewise.
2425         (fileio_errno_to_host): Likewise.
2426         (gdb_bfd_iovec_fileio_open): Likewise.
2427         (gdb_bfd_iovec_fileio_pread): Likewise.
2428         (gdb_bfd_iovec_fileio_close): Likewise.
2429         (gdb_bfd_iovec_fileio_fstat): Likewise.
2430         (gdb_bfd_open): Use target fileio to access paths prefixed
2431         with "target:" where necessary.
2432
2433 2015-04-02  Gary Benson <gbenson@redhat.com>
2434
2435         * target.h (struct target_ops) <to_filesystem_is_local>:
2436         New field.
2437         (target_filesystem_is_local): New macro.
2438         * target-delegates.c: Regenerate.
2439         * remote.c (remote_filesystem_is_local): New function.
2440         (init_remote_ops): Initialize to_filesystem_is_local.
2441
2442 2015-04-02  Gary Benson <gbenson@redhat.com>
2443
2444         * target.h (struct target_ops) <to_fileio_fstat>: New field.
2445         (target_fileio_fstat): New declaration.
2446         * target.c (target_fileio_fstat): New function.
2447         * inf-child.c (inf_child_fileio_fstat): Likewise.
2448         (inf_child_target): Initialize to_fileio_fstat.
2449         * remote.c (init_remote_ops): Likewise.
2450
2451 2015-04-01  Sasha Smundak  <asmundak@google.com>
2452
2453         * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
2454         (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
2455         (py-unwind.o): New recipe.
2456         * NEWS: mention Python frame unwinding.
2457         * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
2458         gdb/unwinder.py and gdb/command/unwinder.py
2459         * python/lib/gdb/__init__.py (packages): Add frame_unwinders
2460         list.
2461         (execute_unwinders): New function.
2462         * python/lib/gdb/command/unwinders.py: New file.
2463         * python/lib/gdb/unwinder.py: New file.
2464         * python/py-objfile.c (objfile_object): Add frame_unwinders field.
2465         (objfpy_dealloc): Decrement frame_unwinders reference count.
2466         (objfpy_initialize): Create frame_unwinders list.
2467         (objfpy_get_frame_unwinders): New function.
2468         (objfpy_set_frame_unwinders): Ditto.
2469         (objfile_getset): Add frame_unwinders attribute to Objfile.
2470         * python/py-progspace.c (pspace_object): Add frame_unwinders field.
2471         (pspy_dealloc): Decrement frame_unwinders reference count.
2472         (pspy_initialize): Create frame_unwinders list.
2473         (pspy_get_frame_unwinders): New function.
2474         (pspy_set_frame_unwinders): Ditto.
2475         (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
2476         * python/py-unwind.c: New file.
2477         * python/python-internal.h (pspy_get_name_unwinders): New prototype.
2478         (objpy_get_frame_unwinders): New prototype.
2479         (gdbpy_initialize_unwind): New prototype.
2480         * python/python.c (gdbpy_apply_type_printers): Call
2481         gdbpy_initialize_unwind.
2482
2483 2015-04-01  Pedro Alves  <palves@redhat.com>
2484
2485         * infrun.c (resume): Check currently_stepping after clearing
2486         stepped_breakpoint, not before.
2487
2488 2015-04-01  Pedro Alves  <palves@redhat.com>
2489
2490         * infrun.c (print_target_wait_results): Print all the ptid
2491         elements.
2492
2493 2015-04-01  Pedro Alves  <palves@redhat.com>
2494
2495         * infrun.c (keep_going): Also discard cleanups if inserting
2496         breakpoints fails.
2497
2498 2015-04-01  Pedro Alves  <palves@redhat.com>
2499
2500         * infrun.c (wait_for_inferior): Install the
2501         finish_thread_state_cleanup cleanup across the whole function, not
2502         just around handle_inferior_event.
2503
2504 2015-04-01  Pedro Alves  <palves@redhat.com>
2505
2506         * infrun.c (resume) <step past permanent breakpoint>: Use
2507         do_target_resume.
2508
2509 2015-04-01  Pedro Alves  <palves@redhat.com>
2510
2511         * linux-nat.c (linux_handle_extended_wait): Always call set_running.
2512
2513 2015-04-01  Pierre-Marie de Rodat  <derodat@adacore.com>
2514
2515         * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
2516
2517 2015-04-01  Pedro Alves  <palves@redhat.com>
2518
2519         * linux-thread-db.c (record_thread): Readd the thread to gdb's
2520         list if it was marked exited.
2521
2522 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
2523
2524         * configure: Regenerated.
2525
2526 2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>
2527             Jan Kratochvil  <jan.kratochvil@redhat.com>
2528             Oleg Nesterov  <oleg@redhat.com>
2529
2530         PR corefiles/16092
2531         * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
2532         New enum identifying the various options of the coredump_filter
2533         file.
2534         (struct smaps_vmflags): New struct.
2535         (use_coredump_filter): New variable.
2536         (decode_vmflags): New function.
2537         (mapping_is_anonymous_p): Likewise.
2538         (dump_mapping_p): Likewise.
2539         (linux_find_memory_regions_full): New variables
2540         'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
2541         Removed variable 'modified'.  Read /proc/<PID>/smaps file; improve
2542         parsing of its information.  Implement memory mapping filtering
2543         based on its contents.
2544         (show_use_coredump_filter): New function.
2545         (_initialize_linux_tdep): New command 'set use-coredump-filter'.
2546         * NEWS: Mention the possibility of using the
2547         '/proc/PID/coredump_filter' file when generating a corefile.
2548         Mention new command 'set use-coredump-filter'.
2549
2550 2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>
2551
2552         * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
2553         read_memory_unsigned_integer.
2554
2555 2015-03-31  H.J. Lu  <hongjiu.lu@intel.com>
2556
2557         * Makefile.in (ZLIB): New.
2558         (ZLIBINC): Likewise.
2559         (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
2560         (CLIBS): Add $(ZLIB).
2561         * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
2562         Add -lz to LIBS.
2563         * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
2564         * top.c (print_gdb_configuration): Remove --with-zlib and
2565         --without-zlib.
2566         * config.in: Regenerated.
2567         * configure: Likewise.
2568
2569 2015-03-31  Antoine Tremblay  <antoine.tremblay@ericsson.com>
2570
2571         * NEWS: Mention info os cpus support.
2572         * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
2573         (struct osdata_type): Add cpus entry, reorder the entries in
2574         alphabetical order.
2575
2576 2015-03-31  Matthias Klose  <doko@ubuntu.com>
2577
2578         * compile/compile.c (compile_to_object): Allow triplets with or
2579         without vendor set.
2580
2581 2015-03-30  Doug Evans  <dje@google.com>
2582
2583         PR c++/18141
2584         * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
2585         klass in VAR_DOMAIN.
2586
2587 2015-03-30  Gary Benson <gbenson@redhat.com>
2588
2589         * remote.c (remote_mourn_1): Remove function.  Update all callers
2590         to use remote_mourn.
2591         (extended_remote_mourn_1): Remove function.  Update all callers
2592         to use extended_remote_mourn.
2593         (extended_remote_attach_1): Remove function.  Update all callers
2594         to use extended_remote_attach.
2595
2596 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
2597
2598         * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
2599         (HFILES_NO_SRCDIR): Add ft32-tdep.h.
2600         (ALLDEPFILES): Add ft32-tdep.c.
2601         * configure.tgt: Add FT32 entry.
2602         * ft32-tdep.c: New file, FT32 target-dependent code.
2603         * ft32-tdep.h: New file, FT32 target-dependent code.
2604
2605 2015-03-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
2606
2607         Revert:
2608         2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
2609         Code cleanup.
2610         * printcmd.c (print_command_1): Move expr variable scope.
2611
2612 2015-03-27  Joel Brobecker  <brobecker@adacore.com>
2613
2614         * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
2615
2616 2015-03-27  Andrzej Kaczmarek  <andrzej.kaczmarek@tieto.com>
2617
2618         * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
2619         sections.
2620
2621 2015-03-26  Joel Brobecker  <brobecker@adacore.com>
2622
2623         * dtrace-probe.c (dtrace_process_dof_probe): Contain any
2624         exception raised while parsing the probe arguments.
2625         Force parsing to be done using the C language parser.
2626         * expression.h (parse_expression_with_language): Declare.
2627         * parse.c (parse_expression_with_language): New function.
2628
2629 2015-03-26  Jon Turney  <jon.turney@dronecode.org.uk>
2630
2631         * MAINTAINERS (Write After Approval): Add "Jon Turney".
2632
2633 2015-03-26  Andy Wingo  <wingo@igalia.com>
2634
2635         PR symtab/18148
2636         * dwarf2read.c (struct partial_die_info): Add has_const_value
2637         member.
2638         (add_partial_symbol): Don't punt on symbols that have const_value
2639         attributes.
2640         (read_partial_die): Detect DW_AT_const_value.
2641
2642 2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
2643
2644         Code cleanup.
2645         * printcmd.c (print_command_1): Move expr variable scope.
2646
2647 2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
2648
2649         Code cleanup.
2650         * printcmd.c (validate_format): Make the parameter cmdname const.
2651
2652 2015-03-26  Don Breazeal  <donb@codesourcery.com>
2653
2654         * remote.c (_initialize_remote): Update comment.
2655
2656 2015-03-26  Pedro Alves  <palves@redhat.com>
2657             Jon TURNEY  <jon.turney@dronecode.org.uk>
2658
2659         * coffread.c (coff_symfile_read): When constructing the name of an
2660         import stub symbol from import symbol for amd64, only skip the
2661         char after _imp_ if the target is underscored (like i386) and the
2662         char is indeed the target's leading char.
2663
2664 2015-03-25  Pedro Alves  <palves@redhat.com>
2665
2666         * target.h <to_async>: Replace 'callback' and 'context' parameters
2667         with boolean 'enable' parameter.
2668         (target_async): Replace CALLBACK and CONTEXT parameters with
2669         boolean ENABLE parameter.
2670         * inf-loop.c (inferior_event_handler): Adjust.
2671         * linux-nat.c (linux_nat_attach, linux_nat_resume)
2672         (linux_nat_resume): Adjust.
2673         (async_client_callback, async_client_context): Delete.
2674         (handle_target_event): Call inferior_event_handler directly.
2675         (linux_nat_async): Replace 'callback' and 'context' parameters
2676         with boolean 'enable' parameter.  Adjust.  Remove references to
2677         async_client_callback and async_client_context.
2678         (linux_nat_close): Adjust.
2679         * record-btrace.c (record_btrace_async): Replace 'callback' and
2680         'context' parameters with boolean 'enable' parameter.  Adjust.
2681         (record_btrace_resume): Adjust.
2682         * record-full.c (record_full_async): Replace 'callback' and
2683         'context' parameters with boolean 'enable' parameter.  Adjust.
2684         (record_full_resume, record_full_core_resume): Adjust.
2685         * remote.c (struct remote_state) <async_client_callback,
2686         async_client_context>: Delete fields.
2687         (remote_start_remote, extended_remote_attach_1, remote_resume)
2688         (extended_remote_create_inferior): Adjust.
2689         (remote_async_serial_handler): Call inferior_event_handler
2690         directly.
2691         (remote_async): Replace 'callback' and 'context' parameters with
2692         boolean 'enable' parameter.  Adjust.
2693         * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
2694         Adjust.
2695         * target-delegates.c: Regenerate.
2696
2697 2015-03-25  Gary Benson <gbenson@redhat.com>
2698             Pedro Alves  <palves@redhat.com>
2699
2700         * target.c (fileio_ft_t): New typedef, define object vector.
2701         (fileio_fhandles): New static variable.
2702         (is_closed_fileio_fh): New macro.
2703         (lowest_closed_fd): New static variable.
2704         (acquire_fileio_fd): New function.
2705         (release_fileio_fd): Likewise.
2706         (fileio_fd_to_fh): New macro.
2707         (target_fileio_open): Wrap the file descriptor on success.
2708         (target_fileio_pwrite): Updated to use wrapped file descriptor.
2709         (target_fileio_pread): Likewise.
2710         (target_fileio_close): Likewise.
2711
2712 2015-03-24  Pedro Alves  <palves@redhat.com>
2713
2714         * thread.c (thread_apply_all_command): Take exited threads into
2715         account.
2716
2717 2015-03-24  Pedro Alves  <palves@redhat.com>
2718
2719         * infrun.c (resume, proceed): Mention
2720         switch_back_to_stepped_thread, not switch_back_to_stepping.
2721
2722 2015-03-24  Pedro Alves  <palves@redhat.com>
2723
2724         * infrun.c (user_visible_resume_ptid): Rewrite going from
2725         most-locked to unlocked instead of the opposite.  Move comment ...
2726         * infrun.h (user_visible_resume_ptid): ... here.
2727
2728 2015-03-24  Pedro Alves  <palves@redhat.com>
2729
2730         * linux-nat.c (linux_nat_resume): Output debug logs before trying
2731         to resume the event lwp.  Use the lwp's ptid instead of the passed
2732         in (maybe wildcard) ptid.
2733         (stop_wait_callback): Tweak debug log output.
2734         (check_stopped_by_breakpoint): Tweak debug log output.  Also dump
2735         TRAP_TRACE.
2736         (linux_nat_filter_event): In debug output, distinguish a
2737         resume_stop SIGSTOP from a delayed SIGSTOP.  Output debug logs
2738         before trying to resume the lwp.
2739
2740 2015-03-24  Joel Brobecker  <brobecker@adacore.com>
2741
2742         * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
2743         pointer indirection.
2744         * gdbtypes.c (get_dyn_prop): Adjust, following change above.
2745         (add_dyn_prop, copy_dynamic_prop_list): Likewise.
2746
2747 2015-03-24  Joel Brobecker  <brobecker@adacore.com>
2748
2749         * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
2750         Renames DYN_ATTR_DATA_LOCATION.
2751         (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
2752         DYN_ATTR_DATA_LOCATION.
2753         * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
2754         instead of DYN_ATTR_DATA_LOCATION.
2755
2756 2015-03-24  Pedro Alves  <palves@redhat.com>
2757
2758         * breakpoint.c (until_break_command): Adjust call to proceed.
2759         * gdbthread.h (struct thread_control_state) <stepping_command>:
2760         New field.
2761         * infcall.c (run_inferior_call): Adjust call to proceed.
2762         * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
2763         Adjust calls to proceed.
2764         (set_step_frame): Set the current thread's step_start_function
2765         here.
2766         (step_once): Adjust calls to proceed.
2767         (jump_command, signal_command, until_next_command)
2768         (finish_backward, finish_forward, proceed_after_attach_callback)
2769         (attach_command_post_wait): Adjust calls to proceed.
2770         * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
2771         (do_target_resume): New function, factored out from ...
2772         (resume): ... here.  Remove 'step' parameter.  Instead, check
2773         currently_stepping to determine whether the thread should be
2774         single-stepped.
2775         (proceed): Remove 'step' parameter and don't set the thread's
2776         step_start_function here.  Adjust call to 'resume'.
2777         (handle_inferior_event): Adjust calls to 'resume'.
2778         (switch_back_to_stepped_thread): Use do_target_resume instead of
2779         'resume'.
2780         (keep_going): Adjust calls to 'resume'.
2781         * infrun.h (proceed): Remove 'step' parameter.
2782         (resume): Likewise.
2783         * windows-nat.c (do_initial_windows_stuff): Adjust call to
2784         'resume'.
2785         * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
2786
2787 2015-03-24  Pedro Alves  <palves@redhat.com>
2788
2789         * gdbthread.h (struct thread_control_state) <stepping_command>:
2790         New field.
2791         * infcmd.c (step_once): Pass step=1 to clear_proceed_status.  Set
2792         the thread's stepping_command field.
2793         * infrun.c (resume): Check the thread's stepping_command flag to
2794         determine which threads should be resumed.  Rename 'entry_step'
2795         local to user_step.
2796         (clear_proceed_status_thread): Clear 'stepping_command'.
2797         (schedlock_applies): Change parameter type to struct thread_info
2798         pointer.  Adjust.
2799         (find_thread_needs_step_over): Remove 'step' parameter.  Adjust.
2800         (switch_back_to_stepped_thread): Adjust calls to
2801         'schedlock_applies'.
2802         (_initialize_infrun): Adjust "set scheduler-locking step" help.
2803
2804 2015-03-24  Pedro Alves  <palves@redhat.com>
2805
2806         * infrun.c (step_start_function): Delete and ...
2807         * gdbthread.h (struct thread_control_state) <step_start_function>:
2808         ... now a field here.
2809         * infrun.c (clear_proceed_status_thread): Clear the thread's
2810         step_start_function.
2811         (proceed, process_event_stop_test, print_stop_event): Adjust.
2812
2813 2015-03-24  Pedro Alves  <palves@redhat.com>
2814
2815         * infrun.c (proceed): No longer handle negative step.
2816
2817 2015-03-24  Gary Benson  <gbenson@redhat.com>
2818
2819         * nat/x86-linux.h (x86_linux_new_thread): New declaration.
2820         (x86_linux_prepare_to_resume): Likewise.
2821         * x86-linux-nat.c (x86_linux_new_thread):
2822         Moved to nat/x86-linux.c.
2823         (x86_linux_prepare_to_resume): Likewise.
2824         * nat/x86-linux.c (x86_linux_new_thread): New function.
2825         (x86_linux_prepare_to_resume): Likewise.
2826
2827 2015-03-24  Gary Benson  <gbenson@redhat.com>
2828
2829         * nat/x86-linux-dregs.h: New file.
2830         * nat/x86-linux-dregs.c: Likewise.
2831         * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
2832         (x86-linux-dregs.o): New rule.
2833         * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
2834         * config/i386/linux64.mh (NATDEPFILES): Likewise.
2835         * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
2836         (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
2837         (x86_linux_dr_get): Likewise.
2838         (x86_linux_dr_set): Likewise.
2839         (x86_linux_dr_get_addr): Likewise.
2840         (x86_linux_dr_get_control): Likewise.
2841         (x86_linux_dr_get_status): Likewise.
2842         (update_debug_registers_callback): Likewise.
2843         (x86_linux_dr_set_control): Likewise.
2844         (x86_linux_dr_set_addr): Likewise.
2845         (x86_linux_update_debug_registers): Likewise.
2846
2847 2015-03-24  Gary Benson  <gbenson@redhat.com>
2848
2849         * x86-linux-nat.c (x86_linux_update_debug_registers):
2850         New function, factored out from...
2851         (x86_linux_prepare_to_resume): ...this.
2852
2853 2015-03-24  Gary Benson  <gbenson@redhat.com>
2854
2855         * x86-linux-nat.c (x86_linux_dr_get): Update comments.
2856         (x86_linux_dr_set): Likewise.
2857         (x86_linux_dr_get_addr): Likewise.
2858         (x86_linux_dr_get_control): Likewise.
2859         (x86_linux_dr_get_status): Likewise.
2860         (update_debug_registers_callback): Likewise.
2861         (x86_linux_dr_set_control): Likewise.
2862         (x86_linux_dr_set_addr): Likewise.
2863         (x86_linux_prepare_to_resume): Likewise.
2864         (x86_linux_new_thread): Likewise.
2865
2866 2015-03-24  Gary Benson  <gbenson@redhat.com>
2867
2868         * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
2869         (x86_linux_new_thread): Rename argument.
2870
2871 2015-03-24  Gary Benson  <gbenson@redhat.com>
2872
2873         * nat/x86-linux.h: New file.
2874         * nat/x86-linux.c: Likewise.
2875         * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
2876         (x86-linux.o): New rule.
2877         * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
2878         * config/i386/linux64.mh (NATDEPFILES): Likewise.
2879         * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
2880         (lwp_set_arch_private_info): New declaration.
2881         (lwp_arch_private_info): Likewise.
2882         * linux-nat.c (lwp_set_arch_private_info): New function.
2883         (lwp_arch_private_info): Likewise.
2884         * x86-linux-nat.c: Include nat/x86-linux.h.
2885         (arch_lwp_info): Removed structure.
2886         (update_debug_registers_callback):
2887         Use lwp_set_debug_registers_changed.
2888         (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
2889         and lwp_set_debug_registers_changed.
2890         (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2891
2892 2015-03-24  Gary Benson  <gbenson@redhat.com>
2893
2894         * nat/linux-nat.h (ptid_of_lwp): New declaration.
2895         (lwp_is_stopped): Likewise.
2896         (lwp_stop_reason): Likewise.
2897         * linux-nat.c (ptid_of_lwp): New function.
2898         (lwp_is_stopped): Likewise.
2899         (lwp_is_stopped_by_watchpoint): Likewise.
2900         * x86-linux-nat.c (update_debug_registers_callback):
2901         Use lwp_is_stopped.
2902         (x86_linux_prepare_to_resume): Use ptid_of_lwp and
2903         lwp_stop_reason.
2904
2905 2015-03-24  Gary Benson  <gbenson@redhat.com>
2906
2907         * linux-nat.h (linux_stop_lwp): Move declaration to...
2908         * nat/linux-nat.h (linux_stop_lwp): New declaration.
2909
2910 2015-03-24  Gary Benson  <gbenson@redhat.com>
2911
2912         * linux-nat.h: Include nat/linux-nat.h.
2913         (iterate_over_lwps): Move declaration to nat/linux-nat.h.
2914         * nat/linux-nat.h (struct lwp_info): New forward declaration.
2915         (iterate_over_lwps_ftype): New typedef.
2916         (iterate_over_lwps): New declaration.
2917         * linux-nat.h (iterate_over_lwps): Update comment.  Use
2918         iterate_over_lwps_ftype.  Update callback return value check.
2919
2920 2015-03-24  Gary Benson  <gbenson@redhat.com>
2921
2922         * x86-nat.h (x86_debug_reg_state): Move declaration to...
2923         * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
2924
2925 2015-03-24  Gary Benson  <gbenson@redhat.com>
2926
2927         * nat/linux-nat.h (current_lwp_ptid): New declaration.
2928         * linux-nat.c (current_lwp_ptid): New function.
2929         * x86-linux-nat.c: Include nat/linux-nat.h.
2930         (x86_linux_dr_get_addr): Use current_lwp_ptid.
2931         (x86_linux_dr_get_control): Likewise.
2932         (x86_linux_dr_get_status): Likewise.
2933         (x86_linux_dr_set_control): Likewise.
2934         (x86_linux_dr_set_addr): Likewise.
2935
2936 2015-03-24  Antoine Tremblay  <antoine.tremblay@ericsson.com>
2937
2938         PR breakpoints/16466
2939         * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
2940
2941 2015-03-23  Joel Brobecker  <brobecker@adacore.com>
2942
2943         * ser-mingw.c (ser_windows_setparity): Fix indentation.
2944         * ser-unix.c (hardwire_setparity): Likewise.
2945
2946 2015-03-23  Yurij Grechishhev  <yurij.grechishhev@gmail.com>
2947
2948         * NEWS: Mention set/show serial parity command.
2949         * monitor.c (monitor_open): Call serial_setparity.
2950         * remote.c (remote_open_1): Likewise.
2951         * ser-base.c (ser_base_serparity): New function.
2952         * ser-base.h (ser_base_setparity): Add  declaration.
2953         * ser-go32.c (dos_ops): Set "setparity" field.
2954         * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
2955         state.Parity.
2956         (ser_windows_setparity): New function.
2957         (hardwire_ops): Add ser_windows_setparity.
2958         (tty_ops): Add NULL for setparity field.
2959         (pipe_ops): Add ser_base_setparity.
2960         (tcp_ops): Likewise.
2961         * ser-pipe.c (pipe_ops): Likewise.
2962         * ser-tcp.c (tcp_ops): Likewise.
2963         * ser-unix.c (hardwire_setparity): Add declaration.
2964         (hardwire_raw): Don't reset PARENB flag.
2965         (hardwire_setparity): New function.
2966         (hardwire_ops): Add hardwire_setparity.
2967         * serial.c (serial_setparity): New function.
2968         (serial_parity): New global.
2969         (parity_none, parity_odd, parity_even, parity_enums, parity):
2970         New static globals.
2971         (set_parity): New function.
2972         (_initialize_serial): Add set/show serial parity commands.
2973         * serial.h (GDBPARITY_NONE): Define.
2974         (GDBPARITY_ODD): Define.
2975         (GDBPARITY_EVEN): Define.
2976         (serial_setparity) Add declaration.
2977         (struct serial_ops): Add setparity field.
2978         * target.h (serial_parity): Add declaration.
2979
2980 2015-03-23  Keith Seitz  <keiths@redhat.com>
2981
2982         * linespec.c (linespec_lexer_lex_keyword): Update comment.
2983
2984 2015-03-23  Keith Seitz  <keiths@redhat.com>
2985
2986         * breakpoint.c (parse_breakpoint_sals): Use
2987         linespec_lexer_lex_keyword to ascertain if the user specified
2988         a NULL location.
2989         * linespec.c [IF_KEYWORD_INDEX]: Define.
2990         (linespec_lexer_lex_keyword): Export.
2991         (struct ls_parser) <keyword_ok>: Remove.
2992         A keyword is only a keyword if not followed by another keyword.
2993         (linespec_lexer_lex_one): Remove keyword_ok handling.
2994         Add comment explaining why the parsing stream is not advanced
2995         when a keyword is seen.
2996         (parse_linespec): Remove parser->keyword_ok.
2997         * linespec.h (linespec_lexer_lex_keyword): Add declaration.
2998
2999 2015-03-23  Keith Seitz  <keiths@redhat.com>
3000
3001         PR gdb/18021
3002         * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
3003         if we find a static method with DW_AT_vtable_elem_location.
3004
3005 2015-03-21  Eli Zaretskii  <eliz@gnu.org>
3006
3007         * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
3008         before the second loop, to avoid undefined behavior.  Reported by
3009         Anton Blanchard <anton@samba.org>.
3010
3011 2015-03-20  Keven Boell  <keven.boell@intel.com>
3012
3013         * gdbtypes.c (resolve_dynamic_type_internal): Adapt
3014         data_location usage to linked list.
3015         (resolve_dynamic_type_internal): Adapt data_location to
3016         linked list.
3017         (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
3018         (copy_type_recursive, copy_type): Add copy of linked list.
3019         * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
3020         (struct dynamic_prop_list): New struct.
3021         * dwarf2read.c (set_die_type): Set data_location data.
3022
3023 2015-03-20  Pedro Alves  <palves@redhat.com>
3024
3025         * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
3026         inner block and make it const.
3027         * machoread.c (get_archive_prefix_len): Make "lparen" const.
3028
3029 2015-03-20  Pedro Alves  <palves@redhat.com>
3030
3031         * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
3032         * breakpoint.h (set_breakpoint_condition): Update declaration.
3033
3034 2015-03-20  Pedro Alves  <palves@redhat.com>
3035
3036         * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
3037
3038 2015-03-20  Pedro Alves  <palves@redhat.com>
3039
3040         * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
3041
3042 2015-03-20  Pedro Alves  <palves@redhat.com>
3043
3044         * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
3045
3046 2015-03-20  Pedro Alves  <palves@redhat.com>
3047
3048         * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
3049         (nto_init_solib_absolute_prefix): Likewise.
3050
3051 2015-03-20  Pedro Alves  <palves@redhat.com>
3052
3053         * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
3054         * spu-tdep.c (spu_gdbarch_init): Make "name" const.
3055
3056 2015-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>
3057
3058         * config/djgpp/README: Remove gdb.hp.
3059
3060 2015-03-20  Yao Qi  <yao.qi@linaro.org>
3061
3062         * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
3063         set_gdbarch_cannot_step_breakpoint.
3064
3065 2015-03-19  Pedro Alves  <palves@redhat.com>
3066
3067         * linux-nat.c (linux_resume_one_lwp): Rename to ...
3068         (linux_resume_one_lwp_throw): ... this.  Don't handle ESRCH here,
3069         instead call perror_with_name.
3070         (check_ptrace_stopped_lwp_gone): New function.
3071         (linux_resume_one_lwp): Reimplement as wrapper around
3072         linux_resume_one_lwp_throw that swallows errors if the LWP is
3073         gone.
3074         (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
3075         swallows errors if the LWP is gone.  Use
3076         linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
3077
3078 2015-03-19  Pedro Alves  <palves@redhat.com>
3079
3080         * linux-nat.c (status_callback): Return early if the LWP has no
3081         status pending.
3082
3083 2015-03-19  Pedro Alves  <palves@redhat.com>
3084
3085         * linux-nat.c (select_event_lwp_callback): Update comment to no
3086         longer mention SIGTRAP.
3087
3088 2015-03-18  Tristan Gingold  <gingold@adacore.com>
3089
3090         * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
3091         redirection code to ...
3092         (amd64_windows_frame_decode_insns): ... Here.  Fix in prologue
3093         checks.  Fix SAVE_NONVOL operations.  Add debug code and comments.
3094
3095 2015-03-18  Gary Benson <gbenson@redhat.com>
3096
3097         (remote_protocol_features): Remove the "vFile:fstat" feature.
3098         (remote_hostio_fstat): Probe for "vFile:fstat" support.
3099
3100 2015-03-11  Yao Qi  <yao.qi@linaro.org>
3101
3102         PR tdep/18107
3103         * aarch64-linux-tdep.c: Include xml-syscall.h
3104         (aarch64_linux_get_syscall_number): New function.
3105         (aarch64_linux_init_abi): Call
3106         set_gdbarch_get_syscall_number.
3107         * syscalls/aarch64-linux.xml: New file.
3108
3109 2015-03-17  Yurij Grechishhev  <yurij.grechishhev@gmail.com>
3110
3111         * ser-base.h (ser_base_setstopbits): Change second argument name
3112         from "rate" to "num".
3113
3114 2015-03-17  Gary Benson <gbenson@redhat.com>
3115             Luke Allardyce <lukeallardyce@gmail.com>
3116
3117         PR gdb/18131
3118         * common/common-remote-fileio.h (sys/stat.h): New include.
3119         (stuct stat): Remove forward declaration.
3120
3121 2015-03-16  John Baldwin  <jhb@FreeBSD.org>
3122
3123         * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
3124         before writing core register notes.
3125
3126 2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
3127             Pedro Alves  <palves@redhat.com>
3128
3129         * gdb_curses.h (tgetnum): Mark with EXTERN_C.
3130         * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
3131         (tgoto): Wrap with extern "C".
3132
3133 2015-03-16  Pedro Alves  <palves@redhat.com>
3134             Yuanhui Zhang  <asmwarrior@gmail.com>
3135
3136         * stub-termcap.c (tputs): Change prototype.
3137
3138 2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
3139             Pedro Alves  <palves@redhat.com>
3140
3141         * windows-nat.c (struct thread_info_struct): Rename to ...
3142         (struct windows_thread_info_struct): ... this.
3143         (thread_info): Rename to ...
3144         (windows_thread_info): ... this.
3145         All users updated.
3146
3147 2015-03-14  Jan Kratochvil  <jan.kratochvil@redhat.com>
3148             Pedro Alves  <palves@redhat.com>
3149
3150         * NEWS: New Removed targets and native configurations.
3151
3152 2015-03-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
3153
3154         Remove HPUX.
3155         * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
3156         (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
3157         (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
3158         ia64-hpux-tdep.h, solib-ia64-hpux.h.
3159         (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
3160         ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
3161         * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
3162         hppa-hpux-tdep.c.
3163         * config/ia64/hpux.mh: Remove file.
3164         * config/pa/hpux.mh: Remove file.
3165         * configure: Rebuilt.
3166         * configure.ac (dlgetmodinfo, somread.o): Remove.
3167         * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3168         (ia64-*-hpux*): Remove its float format exception.
3169         * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3170         * hppa-hpux-nat.c: Remove file.
3171         * hppa-hpux-tdep.c: Remove file.
3172         * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
3173         Move them here from hppa-tdep.h
3174         (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
3175         (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
3176         * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
3177         Move them to hppa-tdep.c.
3178         (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
3179         declarations.
3180         * ia64-hpux-nat.c: Remove file.
3181         * ia64-hpux-tdep.c: Remove file.
3182         * ia64-hpux-tdep.h: Remove file.
3183         * inf-ttrace.c: Remove file.
3184         * inf-ttrace.h: Remove file.
3185         * solib-ia64-hpux.c: Remove file.
3186         * solib-ia64-hpux.h: Remove file.
3187         * solib-pa64.c: Remove file.
3188         * solib-pa64.h: Remove file.
3189         * solib-som.c: Remove file.
3190         * solib-som.h: Remove file.
3191         * somread.c: Remove file.
3192
3193 2015-03-13  John Baldwin  <jhb@FreeBSD.org>
3194
3195         * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
3196         * config.in: Regenerate.
3197         * configure: Regenerate.
3198         * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
3199         define.
3200         (fbsd_find_memory_regions): Use kinfo_getvmmap to
3201         enumerate memory regions if present.
3202
3203 2015-03-13  John Baldwin  <jhb@FreeBSD.org>
3204
3205         * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
3206         * i386fbsd-tdep.c: Fix style in various gdb_static_assert
3207         expressions.
3208         (i386fbsd_sigtramp_p): Likewise.
3209
3210 2015-03-12  John Baldwin  <jhb@FreeBSD.org>
3211
3212         * MAINTAINERS (Write After Approval): Add John Baldwin.
3213
3214 2015-03-12  Gary Benson <gbenson@redhat.com>
3215
3216         * solib.c (_initialize_solib): Make "set/show sysroot" use
3217         add_setshow_optional_filename_cmd so it can be restored to
3218         empty after being set.
3219
3220 2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>
3221
3222         * Makefile.in (SFILES): New source break-catch-syscall.c.
3223         (COMMON_OBS): New object break-catch-syscall.o.
3224         * break-catch-syscall.c: New file.
3225         * breakpoint.c: Remove inclusion of "xml-syscall.h".
3226         (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
3227         (struct syscall_catchpoint): Likewise.
3228         (dtor_catch_syscall): Likewise.
3229         (catch_syscall_inferior_data): Likewise.
3230         (struct catch_syscall_inferior_data): Likewise.
3231         (get_catch_syscall_inferior_data): Likewise.
3232         (catch_syscall_inferior_data_cleanup): Likewise.
3233         (insert_catch_syscall): Likewise.
3234         (remove_catch_syscall): Likewise.
3235         (breakpoint_hit_catch_syscall): Likewise.
3236         (print_it_catch_syscall): Likewise.
3237         (print_one_catch_syscall): Likewise.
3238         (print_mention_catch_syscall): Likewise.
3239         (print_recreate_catch_syscall): Likewise.
3240         (catch_syscall_breakpoint_ops): Likewise.
3241         (syscall_catchpoint_p): Likewise.
3242         (create_syscall_event_catchpoint): Likewise.
3243         (catch_syscall_split_args): Likewise.
3244         (catch_syscall_command_1): Likewise.
3245         (is_syscall_catchpoint_enabled): Likewise.
3246         (catch_syscall_enabled): Likewise.
3247         (catching_syscall_number): Likewise.
3248         (catch_syscall_completer): Likewise.
3249         (clear_syscall_counts): Likewise.
3250         (initialize_breakpoint_ops): Move initialization of syscall
3251         catchpoints to break-catch-syscall.c.
3252         (_initialize_breakpoint): Move code related to syscall catchpoints
3253         to break-catch-syscall.c.
3254
3255 2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>
3256
3257         * breakpoint.c (breakpoint_find_if): New function.
3258         * breakpoint.h (breakpoint_find_if): New prototype.
3259
3260 2015-03-11  Gary Benson <gbenson@redhat.com>
3261
3262         * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
3263         * remote-fileio.c (remote_fileio_to_host_uint): New function.
3264         (remote_fileio_to_host_ulong): Likewise.
3265         (remote_fileio_to_host_mode): Likewise.
3266         (remote_fileio_to_host_time): Likewise.
3267         (remote_fileio_to_host_stat): Likewise.
3268         * remote.c (PACKET_vFile_fstat): New enum value.
3269         (remote_protocol_features): Register the "vFile:fstat" feature.
3270         (remote_hostio_fstat): New function.
3271         (remote_bfd_iovec_stat): Use the above.
3272         (_initialize_remote): Register new "set/show remote
3273         hostio-fstat-packet" command.
3274         * symfile.c (separate_debug_file_exists): Update comment.
3275         * NEWS: Announce new vFile:fstat packet.
3276
3277 2015-03-11  Gary Benson <gbenson@redhat.com>
3278
3279         * common/common-remote-fileio.h: New file.
3280         * common/common-remote-fileio.c: Likewise.
3281         * Makefile.in (SFILES): Add common/common-remote-fileio.c.
3282         (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
3283         (COMMON_OBS): Add common-remote-fileio.o.
3284         (common-remote-fileio.o): New rule.
3285         * remote-fileio.h (common-remote-fileio.h): New include.
3286         * remote-fileio.c (gdb/fileio.h): Do not include.
3287         (remote_fileio_to_be): Moved to common-remote-fileio.h.
3288         (remote_fileio_to_fio_uint): Likewise.
3289         (remote_fileio_to_fio_time): Likewise.
3290         (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
3291         (remote_fileio_to_fio_mode): Likewise.
3292         (remote_fileio_to_fio_ulong): Likewise.
3293         (remote_fileio_to_fio_stat): Likewise.
3294
3295 2015-03-11  Andy Wingo  <wingo@igalia.com>
3296
3297         * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
3298         we were checking the cached type, not the cached dynamic type.
3299
3300 2015-03-11  Andy Wingo  <wingo@igalia.com>
3301
3302         * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
3303         other strings, as these are on the GC'd heap, and will be
3304         collected along with the smob.
3305
3306 2015-03-11  Andy Wingo  <wingo@igalia.com>
3307
3308         * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
3309         (objfile_functions): Bind gdbscm_objfile_progspace to
3310         objfile-progspace.
3311         * guile/lib/gdb.scm: Add objfile-progspace to exports.
3312
3313 2015-03-11  Andy Wingo  <wingo@igalia.com>
3314
3315         * guile/guile.c (_initialize_guile): Disable automatic
3316         finalization, if Guile offers us that possibility.
3317         * guile/guile.c (call_initialize_gdb_module):
3318         * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
3319         finalizers in appropriate places.
3320         * configure.ac (AC_TRY_LIBGUILE): Add a check for
3321         scm_set_automatic_finalization_enabled.
3322         * configure: Regenerated.
3323
3324 2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3325
3326         * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
3327         SAL, if possible.
3328
3329 2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3330
3331         * s390-linux-nat.c (struct arch_lwp_info): New.
3332         (s390_fix_watch_points): Rename to...
3333         (s390_prepare_to_resume): ...this.  Skip the PER info update
3334         unless the watch points have changed.
3335         (s390_refresh_per_info, s390_new_thread): New functions.
3336         (s390_insert_watchpoint): Call s390_refresh_per_info instead of
3337         s390_fix_watch_points.
3338         (s390_remove_watchpoint): Likewise.
3339         (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
3340         Register s390_prepare_to_resume.
3341
3342 2015-03-09  Pedro Alves  <palves@redhat.com>
3343
3344         Revert:
3345         2015-03-07  Pedro Alves  <palves@redhat.com>
3346         * common/gdb_socket.h: New file.
3347         * ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
3348         sys/socket.h.
3349         (net_open): Use union gdb_sockaddr_u.
3350
3351 2015-03-07  Pedro Alves  <palves@redhat.com>
3352
3353         * configure.ac (build_warnings): Move -Wmissing-prototypes
3354         -Wdeclaration-after-statement -Wmissing-parameter-type
3355         -Wold-style-declaration -Wold-style-definition to the C-specific
3356         set.
3357         * configure: Regenerate.
3358
3359 2015-03-07  Pedro Alves  <palves@redhat.com>
3360
3361         * common/gdb_socket.h: New file.
3362         * ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
3363         sys/socket.h.
3364         (net_open): Use union gdb_sockaddr_u.
3365
3366 2015-03-07  Pedro Alves  <palves@redhat.com>
3367
3368         * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
3369         (exceptions_state_mc_action_iter)
3370         (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3371         Don't define.
3372         [__cplusplus] (try_scope_depth): New global.
3373         [__cplusplus] (exception_try_scope_entry)
3374         (exception_try_scope_exit, gdb_exception_sliced_copy)
3375         (exception_rethrow): New functions.
3376         (throw_exception): In C++ mode, throw
3377         gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
3378         gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
3379         (throw_it): In C++ mode, use try_scope_depth.
3380         * common/common-exceptions.h [!__cplusplus]
3381         (exceptions_state_mc_action_iter)
3382         (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3383         Don't declare.
3384         [__cplusplus] (exception_try_scope_entry)
3385         (exception_try_scope_exit, exception_rethrow): Declare.
3386         [__cplusplus] (struct exception_try_scope): New struct.
3387         [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
3388         C++ exceptions.
3389         (struct gdb_exception_RETURN_MASK_ALL)
3390         (struct gdb_exception_RETURN_MASK_ERROR)
3391         (struct gdb_exception_RETURN_MASK_QUIT): New types.
3392
3393 2015-03-07  Pedro Alves  <palves@redhat.com>
3394
3395         * main.c (handle_command_errors): Remove volatile qualifier from
3396         parameter.
3397
3398 2015-03-07  Pedro Alves  <palves@redhat.com>
3399
3400         * breakpoint.c (save_breakpoints): Adjust to avoid code between
3401         TRY and CATCH.
3402         * gdbtypes.c (safe_parse_type): Remove empty line.
3403         (types_deeply_equal):
3404         * guile/scm-frame.c (gdbscm_frame_name):
3405         * linux-thread-db.c (find_new_threads_once):
3406         * python/py-breakpoint.c (bppy_get_commands):
3407         * record-btrace.c (record_btrace_insert_breakpoint)
3408         (record_btrace_remove_breakpoint, record_btrace_start_replaying)
3409         (record_btrace_start_replaying): Adjust to avoid code between TRY
3410         and CATCH.
3411
3412 2015-03-07  Pedro Alves  <palves@redhat.com>
3413
3414         * common/common-exceptions.c (struct catcher) <exception>: No
3415         longer a pointer to volatile exception.  Now an exception value.
3416         <mask>: Delete field.
3417         (exceptions_state_mc_init): Remove all parameters.  Adjust.
3418         (exceptions_state_mc): No longer pop the catcher here.
3419         (exceptions_state_mc_catch): New function.
3420         (throw_exception): Adjust.
3421         * common/common-exceptions.h (exceptions_state_mc_init): Remove
3422         all parameters.
3423         (exceptions_state_mc_catch): Declare.
3424         (TRY_CATCH): Rename to ...
3425         (TRY): ... this.  Remove EXCEPTION and MASK parameters.
3426         (CATCH, END_CATCH): New.
3427         All callers adjusted.
3428
3429 2015-03-07  Tom Tromey  <tromey@redhat.com>
3430
3431         * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
3432
3433 2015-03-07  Pedro Alves  <palves@redhat.com>
3434
3435         * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
3436         (amd64_epilogue_frame_cache): Normal exception handling code.
3437         * break-catch-throw.c (check_status_exception_catchpoint)
3438         (re_set_exception_catchpoint): Ditto.
3439         * cli/cli-interp.c (safe_execute_command):
3440         * cli/cli-script.c (script_from_file): Ditto.
3441         * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
3442         Ditto.
3443         * compile/compile-object-run.c (compile_object_run): Ditto.
3444         * cp-abi.c (baseclass_offset): Ditto.
3445         * cp-valprint.c (cp_print_value): Ditto.
3446         * exceptions.c (catch_exceptions_with_msg):
3447         * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
3448         * frame.c (get_frame_address_in_block_if_available): Ditto.
3449         * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
3450         (i386_sigtramp_frame_cache): Ditto.
3451         * infcmd.c (post_create_inferior): Ditto.
3452         * linespec.c (parse_linespec, find_linespec_symbols):
3453         * p-valprint.c (pascal_object_print_value): Ditto.
3454         * parse.c (parse_expression_for_completion): Ditto.
3455         * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
3456         * remote.c (remote_get_noisy_reply): Ditto.
3457         * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
3458         * solib-svr4.c (solib_svr4_r_map): Ditto.
3459
3460 2015-03-06  Gary Benson  <gbenson@redhat.com>
3461
3462         * common/common-utils.h (startswith): New inline function.
3463         All places where this logic was used updated to use the above.
3464
3465 2015-03-05  Pedro Alves  <palves@redhat.com>
3466
3467         PR gdb/18002
3468         * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
3469         after reading the breakpoint's shadow memory.
3470
3471 2015-03-05  Mark Kettenis  <kettenis@gnu.org>
3472
3473         * hppabsd-nat.c: Remove file.
3474         * hppaobsd-nat.c: New file.
3475         * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c.  Add
3476         hppaobsd-nat.c.
3477         * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
3478         hppaobsd-nat.o.
3479
3480 2015-03-04  Pedro Alves  <palves@redhat.com>
3481
3482         * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
3483         (target_decr_pc_after_break): Delete declaration.
3484         * target.c (default_target_decr_pc_after_break)
3485         (target_decr_pc_after_break): Delete.
3486         * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
3487         gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
3488         * linux-thread-db.c (check_event): Likewise.
3489         * infrun.c (adjust_pc_after_break): Likewise.
3490         * darwin-nat.c (cancel_breakpoint): Likewise.
3491         * aix-thread.c (aix_thread_wait): Likewise.
3492         * target-delegates.c: Regenerate.
3493
3494 2015-03-04  Pedro Alves  <palves@redhat.com>
3495
3496         * linux-nat.c (save_sigtrap): Check for breakpoints before
3497         checking watchpoints.
3498         (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
3499         breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
3500         (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
3501         a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
3502         (linux_nat_stopped_by_sw_breakpoint)
3503         (linux_nat_supports_stopped_by_sw_breakpoint)
3504         (linux_nat_stopped_by_hw_breakpoint)
3505         (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
3506         (linux_nat_wait_1): Don't re-increment the PC if relying on
3507         SIGTRAP's siginfo->si_code.
3508         (linux_nat_add_target): Install new target methods.
3509         * linux-thread-db.c (check_event): Don't account for breakpoint PC
3510         offset if the target already adjusted the PC.
3511         * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
3512         (GDB_ARCH_TRAP_BRKPT): New.
3513         (TRAP_HWBKPT): Define if not already defined.
3514
3515 2015-03-04  Pedro Alves  <palves@redhat.com>
3516
3517         * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
3518         * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
3519         Delete field.
3520         <stop_reason>: New field.
3521         (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
3522         (packet_set_cmd_state): New function.
3523         (remote_protocol_features): Register the "swbreak" and "hwbreak"
3524         features.
3525         (remote_query_supported): If not disabled with the corresponding
3526         "set remote foo-packet" command, report support for the swbreak
3527         and hwbreak features.
3528         (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
3529         field.
3530         <stop_reason>: New field.
3531         (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
3532         (remote_wait_as): Adjust.
3533         (remote_stopped_by_sw_breakpoint)
3534         (remote_supports_stopped_by_sw_breakpoint)
3535         (remote_stopped_by_hw_breakpoint)
3536         (remote_supports_stopped_by_hw_breakpoint): New functions.
3537         (remote_stopped_by_watchpoint): New function.
3538         (init_remote_ops): Install them.
3539         (_initialize_remote): Register new "set/show remote
3540         swbreak-feature-packet" and "set/show remote
3541         swbreak-feature-packet" commands.
3542
3543 2015-03-04  Pedro Alves  <palves@redhat.com>
3544
3545         * btrace.h: Include target/waitstatus.h.
3546         (struct btrace_thread_info) <stop_reason>: New field.
3547         * record-btrace.c (record_btrace_step_thread): Use
3548         record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3549         (record_btrace_decr_pc_after_break): Delete.
3550         (record_btrace_stopped_by_sw_breakpoint)
3551         (record_btrace_supports_stopped_by_sw_breakpoint)
3552         (record_btrace_stopped_by_hw_breakpoint)
3553         (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
3554         (init_record_btrace_ops): Install them.
3555         * record-full.c (record_full_hw_watchpoint): Delete and replace
3556         with ...
3557         (record_full_stop_reason): ... this throughout.
3558         (record_full_exec_insn): Adjust.
3559         (record_full_wait_1): Adjust.  No longer re-increment the PC.
3560         (record_full_wait_1): Adjust.  Use
3561         record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3562         (record_full_stopped_by_watchpoint): Adjust.
3563         (record_full_stopped_by_sw_breakpoint)
3564         (record_full_supports_stopped_by_sw_breakpoint)
3565         (record_full_supports_stopped_by_sw_breakpoint)
3566         (record_full_stopped_by_hw_breakpoint)
3567         (record_full_supports_stopped_by_hw_breakpoint): New functions.
3568         (init_record_full_ops, init_record_full_core_ops): Install them.
3569         * record.c (record_check_stopped_by_breakpoint): New function.
3570         * record.h: Include target/waitstatus.h.
3571         (record_check_stopped_by_breakpoint): New declaration.
3572
3573 2015-03-04  Pedro Alves  <palves@redhat.com>
3574
3575         enum lwp_stop_reason -> enum target_stop_reason
3576         * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
3577         (linux_nat_stopped_by_watchpoint, status_callback)
3578         (linux_nat_wait_1): Adjust.
3579         * linux-nat.h (enum lwp_stop_reason): Delete.
3580         (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
3581         * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
3582         * target/waitstatus.h (enum target_stop_reason): New.
3583
3584 2015-03-04  Pedro Alves  <palves@redhat.com>
3585
3586         * breakpoint.c (need_moribund_for_location_type): New function.
3587         (bpstat_stop_status): Don't skipping checking moribund locations
3588         of breakpoint types which the target tell caused a stop.
3589         (program_breakpoint_here_p): New function, factored out from ...
3590         (bp_loc_is_permanent): ... this.
3591         (update_global_location_list): Don't create a moribund location if
3592         the target supports reporting stops of the type of the removed
3593         breakpoint.
3594         * breakpoint.h (program_breakpoint_here_p): New declaration.
3595         * infrun.c (adjust_pc_after_break): Return early if the target has
3596         already adjusted the PC.  Add comments.
3597         (handle_signal_stop): If nothing explains a signal, and the target
3598         tells us the stop was caused by a software breakpoint, check if
3599         there's a breakpoint instruction in the memory.  If so, adjust the
3600         PC before presenting the stop to the user.  Otherwise, ignore the
3601         trap.  If nothing explains a signal, and the target tells us the
3602         stop was caused by a hardware breakpoint, ignore the trap.
3603         * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
3604         to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
3605         to_supports_stopped_by_hw_breakpoint>: New fields.
3606         (target_stopped_by_sw_breakpoint)
3607         (target_supports_stopped_by_sw_breakpoint)
3608         (target_stopped_by_hw_breakpoint)
3609         (target_supports_stopped_by_hw_breakpoint): Define.
3610         * target-delegates.c: Regenerate.
3611
3612 2015-03-04  Pedro Alves  <palves@redhat.com>
3613
3614         * infrun.c (follow_fork_inferior): Use the whole of the
3615         inferior_ptid and pending_follow.related_pid ptids instead of
3616         building ptids from the process components.  Adjust verbose output
3617         to use target_pid_to_str.
3618         * linux-nat.c (linux_child_follow_fork): Use the whole of the
3619         inferior_ptid and pending_follow.related_pid ptids instead of
3620         building ptids from the process components.
3621
3622 2015-03-04  Mark Kettenis  <kettenis@gnu.org>
3623
3624         * inf-ptrace.c [PT_GET_PROCESS_STATE]
3625         (inf_ptrace_insert_fork_catchpoint): New function.
3626         (inf_ptrace_remove_fork_catchpoint): New function.
3627         (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
3628
3629 2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3630
3631         * s390-linux-tdep.c (s390_register_name): Return empty string
3632         instead of NULL for registers that shouldn't be visible.
3633
3634 2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3635
3636         * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
3637         XML file for 64-bit targets.
3638
3639 2015-03-03  Simon Marchi  <simon.marchi@ericsson.com>
3640
3641         * target.h (find_default_create_inferior): Remove declaration.
3642         (find_default_attach): Likewise.
3643
3644 2015-03-03  Pedro Alves  <palves@redhat.com>
3645
3646         * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
3647         Use ptid_get_pid to get the overall process id when resuming all
3648         threads.
3649
3650 2015-03-03  Pedro Alves  <palves@redhat.com>
3651
3652         * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
3653         the lwp field of ptid.  Pass the full ptid to get_thread_regcache.
3654         * inf-ptrace.c (get_ptrace_pid): New function.
3655         (inf_ptrace_resume): Use it.
3656         * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
3657         to the lower layer.
3658
3659 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
3660
3661         * nat/linux-btrace.c: Include sys/utsname.h.
3662         (linux_determine_kernel_ptr_bits): New.
3663         (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
3664         * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
3665         ptr_bits.
3666
3667 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
3668
3669         * btrace.c (ftrace_update_function): Treat return as tailcall for
3670         "_dl_runtime_resolve".
3671
3672 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
3673
3674         * btrace.h (btrace_function) <lbegin, lend>: Remove.
3675         * btrace.c (ftrace_debug): Do not print the line range.
3676         (ftrace_skip_file, ftrace_update_lines): Remove.
3677         (ftrace_new_function): Remove lbegin and lend initialization.
3678         (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
3679         * record-btrace.c (btrace_compute_src_line_range): New.
3680         (btrace_call_history_src_line): Call btrace_compute_src_line_range.
3681
3682 2015-03-02  Pedro Alves  <palves@redhat.com>
3683
3684         * infrun.c (follow_exec): Delete all threads of the process except
3685         the event thread.  Extended comments.
3686
3687 2015-03-02  Joel Brobecker  <brobecker@adacore.com>
3688
3689         * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
3690
3691 2015-03-02  Joel Brobecker  <brobecker@adacore.com>
3692
3693         * utils.h: Remove <stdbool.h> #include.
3694         (producer_is_gcc): Change return type to "int".
3695         * utils.c (producer_is_gcc): Change return type to int.
3696         Return 1 instead of true, and 0 instead of false.
3697         Adjust function documentation accordingly.
3698
3699 2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3700
3701         * s390-linux-nat.c (have_regset_vxrs): New static variable.
3702         (s390_linux_fetch_inferior_registers): Handle vector registers, if
3703         present.
3704         (s390_linux_store_inferior_registers): Likewise.
3705         (s390_get_hwcap): Remove function.  Embed its logic...
3706         (s390_read_description): ...here.  Yield a target description with
3707         vector registers if applicable.
3708         * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
3709         "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
3710         "features/s390x-tevx-linux64.c".
3711         (struct gdbarch_tdep) <v0_full_regnum>: New field.
3712         (s390_dwarf_regmap): Add vector registers.  Remove bogus entries
3713         for "GNU/Linux-specific registers".
3714         (s390_dwarf_reg_r0l): New enum value.
3715         (s390_dwarf_reg_to_regnum): Support vector registers.
3716         (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
3717         of GPR lower halves.
3718         (regnum_is_vxr_full): New function.
3719         (s390_register_name): New function.
3720         (s390_pseudo_register_name): Handle v0-v15, which are composed of
3721         f0-f15 and v0l-v15l.
3722         (s390_pseudo_register_type): Likewise.
3723         (s390_pseudo_register_read): Likewise.
3724         (s390_pseudo_register_write): Likewise.
3725         (s390_value_from_register): Account for the fact that values are
3726         placed left-justified in vector registers.
3727         (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
3728         the vector reggroup and omit them from the general reggroup.
3729         (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
3730         (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
3731         (s390_iterate_over_regset_sections): Add iterations for the two
3732         new vector regsets.
3733         (s390_core_read_description): Yield a target description with
3734         vector registers if applicable.
3735         (s390_gdbarch_init): Handle target descriptions with vector
3736         registers.  Add "register_name" gdbarch method.
3737         (_initialize_s390_tdep): Call new tdesc initialization functions.
3738         * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
3739         (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
3740         (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
3741         (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
3742         (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
3743         (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
3744         (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
3745         (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
3746         (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
3747         (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
3748         (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
3749         (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
3750         (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
3751         (S390_NUM_REGS): Adjust value.
3752         (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
3753         (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
3754         (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
3755         * NEWS: Announce S/390 vector register support.
3756
3757 2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3758
3759         * features/s390-tevx-linux64.xml: New file.
3760         * features/s390-vx-linux64.xml: New file.
3761         * features/s390-vx.xml: New file.
3762         * features/s390x-tevx-linux64.xml: New file.
3763         * features/s390x-vx-linux64.xml: New file.
3764         * features/Makefile (WHICH): Add s390-vx-linux64,
3765         s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
3766         (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
3767         (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
3768         macros.
3769         * features/s390-tevx-linux64.c: New generated file.
3770         * features/s390-vx-linux64.c: Likewise.
3771         * features/s390x-tevx-linux64.c: Likewise.
3772         * features/s390x-vx-linux64.c: Likewise.
3773         * regformats/s390-tevx-linux64.dat: Likewise.
3774         * regformats/s390-vx-linux64.dat: Likewise.
3775         * regformats/s390x-tevx-linux64.dat: Likewise.
3776         * regformats/s390x-vx-linux64.dat: Likewise.
3777
3778 2015-02-28  Doug Evans  <xdje42@gmail.com>
3779
3780         * symtab.h (struct symtab) <next>: Fix comment.
3781
3782 2015-02-27  Simon Marchi  <simon.marchi@ericsson.com>
3783
3784         * python/python.c (python_GdbModuleDef): Rename GdbMethods to
3785         python_GdbMethods.
3786
3787 2015-02-27  Pedro Alves  <palves@redhat.com>
3788
3789         * dtrace-probe.c (dtrace_probe_ops): Make extern.
3790
3791 2015-02-27  Pedro Alves  <palves@redhat.com>
3792
3793         * common/common-exceptions.h (exception_none): Declare.
3794         * common/common-exceptions.c (exception_none): Moved from
3795         exceptions.c.
3796         (exceptions_state_mc_init): Use exception_none.
3797         * exceptions.c (exception_none): Move to
3798         common/common-exceptions.c.
3799         * exceptions.h (exception_none): Move to
3800         common/common-exceptions.h.
3801
3802 2015-02-27  Pedro Alves  <palves@redhat.com>
3803
3804         * main.c (catch_command_errors, catch_command_errors_const):
3805         Remove 'mask' argument.  Adjust.
3806         (captured_main): Adjust callers.
3807
3808 2015-02-27  Pedro Alves  <palves@redhat.com>
3809
3810         * python/python-internal.h: Include "extension-priv.h".
3811
3812 2015-02-27  Pedro Alves  <palves@redhat.com>
3813
3814         * breakpoint.h (enum print_stop_action): Move further up in the
3815         file.
3816
3817 2015-02-27  Pedro Alves  <palves@redhat.com>
3818
3819         * gdbarch.sh: Include regcache.h.
3820         * gdbarch.h: Regenerate.
3821
3822 2015-02-27  Pedro Alves  <palves@redhat.com>
3823
3824         * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
3825         Remove duplicate const.
3826         * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
3827         duplicate const.
3828
3829 2015-02-27  Pedro Alves  <palves@redhat.com>
3830
3831         * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
3832         * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
3833         * features/feature_to_c.sh: Tag the generated xml_builtin array
3834         with extern const in C++ mode.
3835
3836 2015-02-27  Tom Tromey  <tromey@redhat.com>
3837
3838         * minidebug.c (struct lzma_stream): Rename to ...
3839         (struct gdb_lzma_stream): ... this.
3840         (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
3841
3842 2015-02-27  Pedro Alves  <palves@redhat.com>
3843
3844         * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
3845         function.
3846         (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
3847         (mi_cmd_stack_list_variables): Use it.
3848
3849 2015-02-27  Pedro Alves  <palves@redhat.com>
3850
3851         * x86-linux-nat.c (u_debugreg_offset): New function.
3852         (x86_linux_dr_get, x86_linux_dr_set): Use it.
3853
3854 2015-02-27  Pedro Alves  <palves@redhat.com>
3855
3856         * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
3857         declaration.
3858         Include break-common.h.
3859
3860 2015-02-27  Tom Tromey  <tromey@redhat.com>
3861             Pedro Alves <palves@redhat.com>
3862
3863         * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
3864         local used to iterate over enums.
3865         * completer.c (signal_completer): Likewise.
3866         * i386-tdep.c (i386_stap_parse_special_token): Likewise.
3867         * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
3868         * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
3869         * tui/tui-layout.c (next_layout, prev_layout): Likewise.
3870         * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
3871         (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
3872         * tui-wingeneral.c (tui_refresh_all):  Likewise.
3873
3874 2015-02-27  Pedro Alves  <palves@redhat.com>
3875
3876         * target.h: Include "infrun.h".
3877
3878 2015-02-27  Pedro Alves  <palves@redhat.com>
3879
3880         * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
3881
3882 2015-02-27  Pedro Alves  <palves@redhat.com>
3883
3884         * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
3885         (IPA_SYM): Use it.
3886         * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
3887
3888 2015-02-27  Pedro Alves  <palves@redhat.com>
3889
3890         * cli-out.c (_rl_erase_entire_line): Move declaration out of
3891         cli_mld_erase_entire_line, and make it extern "C".
3892         * common/common-defs.h (EXTERN_C): New.
3893         * completer.c (_rl_completion_prefix_display_length)
3894         (_rl_print_completions_horizontally, QSFUNC): Move declarations
3895         out of gdb_display_match_list_1.
3896         (_rl_qsort_string_compare): Move declaration out of
3897         gdb_display_match_list_1, and make it extern "C".
3898         * defs.h (re_comp): Use EXTERN_C.
3899         * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
3900         and make it extern "C".
3901         (monstartup): Move declaration out of maintenance_set_profile_cmd,
3902         and make it extern "C".
3903         (main): Move declaration out of maintenance_set_profile_cmd.
3904         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
3905         EXTERN_C.
3906
3907 2015-02-27  Pedro Alves  <palves@redhat.com>
3908
3909         * python/python.c (GdbMethods): Rename to ...
3910         (python_GdbMethods): ... this and make extern.
3911         (GdbModuleDef): Rename to ...
3912         (python_GdbModuleDef): ... this and make extern.
3913
3914 2015-02-27  Pedro Alves  <palves@redhat.com>
3915
3916         * record-btrace.c (set_record_btrace_cmdlist)
3917         (show_record_btrace_cmdlist): Remove redefinitions.
3918
3919 2015-02-27  Tom Tromey  <tromey@redhat.com>
3920             Pedro Alves  <palves@redhat.com>
3921
3922         * dwarf2-frame.c (enum cfa_how_kind, struct
3923         dwarf2_frame_state_reg_info): Move out of struct
3924         dwarf2_frame_state.
3925         * dwarf2read.c (struct tu_stats): Move out of struct
3926         dwarf2_per_objfile.
3927         (struct file_entry): Move out of struct line_header.
3928         (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
3929         typedef_field_list): Move out of struct field_info.
3930         * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
3931         Move out of struct dynamic_prop.
3932         (union type_owner, union field_location, struct field, struct
3933         range_bounds, union type_specific): Move out of struct main_type.
3934         (struct fn_fieldlist, struct fn_field, struct typedef_field)
3935         (VOFFSET_STATIC): Move out of struct cplus_struct_type.
3936         (struct call_site_target, union call_site_parameter_u, struct
3937         call_site_parameter): Move out of struct call_site.
3938         * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
3939         m32c_prologue.
3940         (enum srcdest_kind): Move out of struct srcdest.
3941         * main.c (enum cmdarg_kind): Move out of struct cmdarg.
3942         * prologue-value.h (enum prologue_value_kind): Move out of struct
3943         prologue_value.
3944         * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
3945         gdbarch_tdep.
3946         * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
3947         out of struct field_info.
3948         * symfile.h (struct other_sections): Move out of struct
3949         section_addr_info.
3950         * symtab.c (struct symbol_cache_slot): Move out struct
3951         block_symbol_cache.
3952         * target-descriptions.c (enum tdesc_type_kind): Move out of
3953         typedef struct tdesc_type.
3954         * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
3955         struct tui_line_or_address.
3956         * value.c (enum internalvar_kind, union internalvar_data): Move
3957         out of struct internalvar.
3958         * xtensa-tdep.h (struct ctype_cache): Move out of struct
3959         gdbarch_tdep.
3960
3961 2015-02-27  Tom Tromey  <tromey@redhat.com>
3962             Pedro Alves  <palves@redhat.com>
3963
3964         Rename symbols whose names are reserved C++ keywords throughout.
3965
3966 2015-02-27  Pedro Alves  <palves@redhat.com>
3967
3968         * Makefile.in (COMPILER): New, get it from autoconf.
3969         (COMPILE.pre, CC_LD): Use COMPILER.
3970         (CXX): Get from autoconf instead.
3971         (CXX_FOR_TARGET): Default to g++ instead of gcc.
3972         * acinclude.m4: Include build-with-cxx.m4.
3973         * build-with-cxx.m4: New file.
3974         * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
3975         Disable -Werror by default if building in C++ mode.
3976         (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
3977         -Wno-narrowing in C++ mode.  Only enable -Wpointer-sign in C mode.
3978         Run supported-warning-flags tests with the C++ compiler.
3979         Save/restore CXXFLAGS too.
3980         * configure: Regenerate.
3981
3982 2015-02-27  Pedro Alves  <palves@redhat.com>
3983
3984         * libiberty.m4: New file.
3985         * acinclude.m4: Include libiberty.m4.
3986         * configure.ac: Call libiberty_INIT.
3987         * config.in, configure: Regenerate.
3988
3989 2015-02-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3990
3991         * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
3992         31-bit targets, but 64-bit targets as well.
3993         (s390_gnu_triplet_regexp): New function.
3994         (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
3995         64-bit targets as well.  Set the gnu_triplet_regexp gdbarch
3996         method.
3997
3998 2015-02-27  Jon TURNEY  <jon.turney@dronecode.org.uk>  (tiny patch)
3999
4000         * windows-nat.c (CONTEXT_DEBUGGER): Remove.
4001         (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS.  Incorporate flags
4002         from CONTEXT_DEBUGGER.
4003
4004 2015-02-26  Doug Evans  <dje@google.com>
4005
4006         * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
4007         CHECK_TYPEDEF.
4008         (set_type_vptr_fieldno): Ditto.
4009         (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
4010         * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
4011
4012 2015-02-26  Pedro Alves  <palves@redhat.com>
4013
4014         * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
4015         * complaints.c (vcomplaint): Pass argument FMT directly to
4016         printf-like functions instead of complaint->fmt.
4017         * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
4018         * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
4019         * compile/compile-loc2c.c (pushf, unary, binary): Add
4020         ATTRIBUTE_PRINTF.
4021         (do_compile_dwarf_expr_to_c): Pass string literal as format string
4022         to pushf.
4023         (BINARY): Pass string literal as format string to 'binary'.
4024         * compile/compile-object-load.c (link_callbacks_einfo): Add
4025         ATTRIBUTE_PRINTF.
4026         * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
4027
4028 2015-02-26  Pedro Alves  <palves@redhat.com>
4029
4030         * windows-termcap.c: Rename to ...
4031         * stub-termcap.c: ... this.  Adjust header line.
4032         * Makefile.in (SFILES): Refer to stub-termcap.c instead of
4033         windows-termcap.c.
4034         * configure: Regenerate.
4035         * configure.ac: Refer to stub-termcap.o instead of
4036         windows-termcap.o.
4037         * gdb_curses.h: Mention stub-termcap.c instead of
4038         windows-termcap.c.
4039
4040 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
4041
4042         * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
4043         (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
4044
4045 2015-02-26  Antoine Tremblay  <antoine.tremblay@ericsson.com>
4046
4047         * gdb/infcmd.c (print_return_value): use type_to_string to print type.
4048
4049 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
4050
4051         * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
4052         bfd_canonicalize_symtab.
4053
4054 2015-02-25  John Baldwin  <jhb@FreeBSD.org>
4055
4056         * amd64fbsd-nat.c: Include sys/user.h.
4057         (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
4058         instead of KERN_PS_STRINGS to locate the signal trampoline.
4059         * i386fbsd-nat.c: Include sys/user.h.
4060         (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
4061         instead of KERN_PS_STRINGS to locate the signal trampoline.
4062         * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
4063         (amd64fbsd_sigtramp_p): New.
4064         (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
4065         longer set default values.
4066         (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
4067         * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
4068         (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
4069         (i386fbsd_freebsd4_sigtramp_start)
4070         (i386fbsd_freebsd4_sigtramp_middle)
4071         (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
4072         (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
4073         (i386fbsd_sigtramp_p): New.
4074         (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
4075         longer set default values.
4076         (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
4077
4078 2015-02-25  John Baldwin  <jhb@freebsd.org>
4079
4080         * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
4081         get_frame_register instead of frame_unwind_register_unsigned.
4082
4083 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
4084
4085         PR build/18033
4086         * compile/compile-c-support.c (c_compute_program): Change // comment.
4087         * compile/compile-object-load.c (setup_sections): Change // comment.
4088
4089 2015-02-26  Joel Brobecker  <brobecker@adacore.com>
4090
4091         PR build/18033:
4092         * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
4093
4094 2015-02-23  Pedro Alves  <palves@redhat.com>
4095
4096         * remote.c (skip_to_semicolon): New function.
4097         (remote_parse_stop_reply) <T stop reply>: Use it.  Don't
4098         special case the stop reasons that look like hex numbers
4099         upfront.  Instead handle real register numbers after matching
4100         all the known stop reasons.
4101
4102 2015-02-21  Doug Evans  <dje@google.com>
4103
4104         PR c++/17976, symtab/17821
4105         * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
4106         is_in_anonymous.  All callers updated.
4107         (find_symbol_in_baseclass): Ditto.
4108         (cp_lookup_nested_symbol_1): Ditto.  Don't search all static blocks
4109         for symbols in an anonymous namespace.
4110         * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
4111         DW_AT_name directly.
4112         (dwarf2_name): Convert missing namespace name to
4113         CP_ANONYMOUS_NAMESPACE_STR.
4114
4115 2015-02-20  Pedro Alves  <palves@redhat.com>
4116
4117         * linux-nat.c (linux_handle_extended_wait): Call
4118         thread_db_notice_clone whenever a new clone LWP is detected.
4119         (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
4120         functions.
4121         * linux-nat.h (thread_db_attach_lwp): Delete declaration.
4122         (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
4123         (linux_unstop_all_lwps): Declare.
4124         * linux-thread-db.c (struct thread_get_info_inout): Delete.
4125         (thread_get_info_callback): Delete.
4126         (thread_from_lwp): Use td_thr_get_info and record_thread.
4127         (thread_db_attach_lwp): Delete.
4128         (thread_db_notice_clone): New function.
4129         (try_thread_db_load_1): If /proc is mounted and shows the
4130         process'es task list, walk over all LWPs and call thread_from_lwp
4131         instead of relying on td_ta_thr_iter.
4132         (attach_thread): Don't call check_thread_signals here.  Split the
4133         tail part of the function (which adds the thread to the core GDB
4134         thread list) to ...
4135         (record_thread): ... this function.  Call check_thread_signals
4136         here.
4137         (thread_db_wait): Don't call thread_db_find_new_threads_1.  Always
4138         call thread_from_lwp.
4139         (thread_db_update_thread_list): Rename to ...
4140         (thread_db_update_thread_list_org): ... this.
4141         (thread_db_update_thread_list): New function.
4142         (thread_db_find_thread_from_tid): Delete.
4143         (thread_db_get_ada_task_ptid): Simplify.
4144         * nat/linux-procfs.c: Include <sys/stat.h>.
4145         (linux_proc_task_list_dir_exists): New function.
4146         * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
4147
4148 2015-02-20  Pedro Alves  <palves@redhat.com>
4149
4150         * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
4151         main LWP.  Handle the case of waitpid returning 0 if we're already
4152         attached to the LWP.  Don't set the LWP's last_resume_kind to
4153         resume_stop if we already knew about the LWP.
4154         (linux_nat_filter_event): Add debug logs.
4155
4156 2015-02-20  Pedro Alves  <palves@redhat.com>
4157
4158         * target.h (forward_target_decr_pc_after_break): Delete
4159         declaration.
4160
4161 2015-02-20  Pedro Alves  <palves@redhat.com>
4162
4163         PR threads/18006
4164         * linux-thread-db.c (thread_get_info_callback): Return early if
4165         the thread's lwp id is -1.
4166
4167 2015-02-20  Joel Brobecker  <brobecker@adacore.com>
4168
4169         GDB 7.9 released.
4170
4171 2015-02-19  Steve Ellcey  <sellcey@imgtec.com>
4172
4173         * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
4174         (dtrace_get_probes) Change type of variable 'dof'.
4175
4176 2015-02-19  Antoine Tremblay  <antoine.tremblay@ericsson.com>
4177
4178         PR breakpoints/16812
4179         * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
4180         * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
4181         * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
4182
4183 2015-02-19  David Taylor  <dtaylor@emc.com>
4184
4185         * common/ax.def (setv): Fix consumed entry in setv DEFOP.
4186
4187 2015-02-18  Patrick Palka  <patrick@parcs.ath.cx>
4188
4189         * tui/tui-io.c (tui_handle_resize_during_io): Remove this
4190         function.
4191         (tui_putc): Don't call tui_handle_resize_during_io.
4192         (tui_getc): Likewise.
4193         (tui_mld_getc): Likewise.
4194         * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
4195         (tui_sigwinch_token): New static variable.
4196         (tui_initialize_win): Adjust documentation.  Set
4197         tui_sigwinch_token.
4198         (tui_async_resize_screen): New asynchronous callback.
4199         (tui_sigwinch_handler): Adjust documentation.  Asynchronously
4200         invoke tui_async_resize_screen.
4201
4202 2015-02-18  Jose E. Marchesi  <jose.marchesi@oracle.com>
4203
4204         * configure: Regenerated.
4205         * configure.ac: Use GDB_AC_TRANSFORM.
4206         * Makefile.in (aclocal_m4_deps): Added transform.m4.
4207         * acinclude.m4: sinclude transform.m4.
4208         * transform.m4: New file.
4209         (GDB_AC_TRANSFORM): New macro.
4210
4211 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4212
4213         * NEWS: Announce the support for DTrace SDT probes.
4214
4215 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4216
4217         * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
4218         (amd64_dtrace_parse_probe_argument): New function.
4219         (amd64_dtrace_probe_is_enabled): Likewise.
4220         (amd64_dtrace_enable_probe): Likewise.
4221         (amd64_dtrace_disable_probe): Likewise.
4222         (amd64_linux_init_abi): Register the
4223         `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
4224         `gdbarch_dtrace_disable_probe' and
4225         `gdbarch_dtrace_probe_is_enabled' hooks.
4226         (amd64_dtrace_disabled_probe_sequence_1): New constant.
4227         (amd64_dtrace_disabled_probe_sequence_2): Likewise.
4228         (amd64_dtrace_enable_probe_sequence): Likewise.
4229         (amd64_dtrace_disable_probe_sequence): Likewise.
4230
4231 2015-01-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4232
4233         * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
4234         the -probe-dtrace new vpossible value for PROBE_MODIFIER.
4235         * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
4236         handle ELF files.
4237         * Makefile.in (SFILES): dtrace-probe.c added.
4238         * configure: Regenerate.
4239         * dtrace-probe.c: New file.
4240         (SHT_SUNW_dof): New constant.
4241         (dtrace_probe_type): New enum.
4242         (dtrace_probe_arg): New struct.
4243         (dtrace_probe_arg_s): New typedef.
4244         (struct dtrace_probe_enabler): New struct.
4245         (dtrace_probe_enabler_s): New typedef.
4246         (dtrace_probe): New struct.
4247         (dtrace_probe_is_linespec): New function.
4248         (dtrace_dof_sect_type): New enum.
4249         (dtrace_dof_dofh_ident): Likewise.
4250         (dtrace_dof_encoding): Likewise.
4251         (DTRACE_DOF_ENCODE_LSB): Likewise.
4252         (DTRACE_DOF_ENCODE_MSB): Likewise.
4253         (dtrace_dof_hdr): New struct.
4254         (dtrace_dof_sect): Likewise.
4255         (dtrace_dof_provider): Likewise.
4256         (dtrace_dof_probe): Likewise.
4257         (DOF_UINT): New macro.
4258         (DTRACE_DOF_PTR): Likewise.
4259         (DTRACE_DOF_SECT): Likewise.
4260         (dtrace_process_dof_probe): New function.
4261         (dtrace_process_dof): Likewise.
4262         (dtrace_build_arg_exprs): Likewise.
4263         (dtrace_get_arg): Likewise.
4264         (dtrace_get_probes): Likewise.
4265         (dtrace_get_probe_argument_count): Likewise.
4266         (dtrace_can_evaluate_probe_arguments): Likewise.
4267         (dtrace_evaluate_probe_argument): Likewise.
4268         (dtrace_compile_to_ax): Likewise.
4269         (dtrace_probe_destroy): Likewise.
4270         (dtrace_gen_info_probes_table_header): Likewise.
4271         (dtrace_gen_info_probes_table_values): Likewise.
4272         (dtrace_probe_is_enabled): Likewise.
4273         (dtrace_probe_ops): New variable.
4274         (info_probes_dtrace_command): New function.
4275         (_initialize_dtrace_probe): Likewise.
4276         (dtrace_type_name): Likewise.
4277
4278 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4279
4280         * gdbarch.sh (dtrace_parse_probe_argument): New.
4281         (dtrace_probe_is_enabled): Likewise.
4282         (dtrace_enable_probe): Likewise.
4283         (dtrace_disable_probe): Likewise.
4284         * gdbarch.c: Regenerate.
4285         * gdbarch.h: Regenerate.
4286
4287 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4288
4289         * stap-probe.c (stap_probe_ops): Add NULLs in the static
4290         stap_probe_ops for `enable_probe' and `disable_probe'.
4291         * probe.c (enable_probes_command): New function.
4292         (disable_probes_command): Likewise.
4293         (_initialize_probe): Define the cli commands `enable probe' and
4294         `disable probe'.
4295         (parse_probe_linespec): New function.
4296         (info_probes_for_ops): Use parse_probe_linespec.
4297         * probe.h (probe_ops): New hooks `enable_probe' and
4298         `disable_probe'.
4299
4300 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4301
4302         * probe.c (compute_probe_arg): Moved from stap-probe.c
4303         (compile_probe_arg): Likewise.
4304         (probe_funcs): Likewise.
4305         * stap-probe.c (compute_probe_arg): Moved to probe.c.
4306         (compile_probe_arg): Likewise.
4307         (probe_funcs): Likewise.
4308
4309 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4310
4311         * probe.c (print_ui_out_not_applicables): New function.
4312         (exists_probe_with_pops): Likewise.
4313         (info_probes_for_ops): Do not include column headers for probe
4314         types for which no probe has been actually found on any object.
4315         Also invoke `print_ui_out_not_applicables' in order to match the
4316         column rows with the header when probes of several types are
4317         listed.
4318         Print the "Type" column.
4319         * probe.h (probe_ops): Added a new probe operation `type_name'.
4320         * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
4321         (stap_type_name): New function.
4322
4323 2015-02-17  Patrick Palka  <patrick@parcs.ath.cx>
4324
4325         * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
4326         (key_is_command_char): Delete.
4327
4328 2015-02-17  Pedro Alves  <palves@redhat.com>
4329
4330         * tui/tui.c (tui_enable): Resize windows before anything
4331         might show a window.
4332
4333 2015-02-17  Max Ostapenko  <m.ostapenko@partner.samsung.com>
4334
4335         PR gdb/17984
4336         * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
4337         (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
4338         call.
4339         * aarch64-tdep.h (tdesc_aarch64): Declare.
4340
4341 2015-02-12  Mark Wielaard  <mjw@redhat.com>
4342
4343         * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
4344
4345 2015-02-13  Doug Evans  <dje@google.com>
4346
4347         * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
4348         anonymous_namespace to is_in_anonymous for consistency with the rest
4349         of the file.
4350         (cp_lookup_bare_symbol): Fix typo in comment.
4351         (cp_search_static_and_baseclasses): Ditto.
4352         (search_symbol_list): Use vertical space in comment better.
4353         (reset_directive_searched): Ditto. Fix typo.
4354         (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
4355
4356 2015-02-13  Yao Qi  <yao.qi@arm.com>
4357
4358         * MAINTAINERS: Update my email address.
4359
4360 2015-02-12  Doug Evans  <dje@google.com>
4361
4362         * symtab.c (completion_list_add_name): Fix memory leak.
4363
4364 2015-02-12  Doug Evans  <dje@google.com>
4365
4366         * completer.c (complete_line): Remove incorrect comment.
4367
4368 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
4369
4370         * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
4371         (py_print_frame): Use RETURN_MASK_ERROR.
4372
4373 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
4374
4375         * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
4376         function comment.  Wrap all function that can throw in cleanups.
4377         (gdbpy_apply_frame_filter): Wrap all function that can throw in
4378         cleanups.
4379
4380 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
4381
4382         * python/py-framefilter.c (py_print_frame): Substitute goto error.
4383         Remove the error label.
4384
4385 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
4386
4387         * python/py-framefilter.c (py_print_frame): Put conditional code paths
4388         with goto first, indent the former else codepath left.  Put variable
4389         'elided' to a new inner block.
4390
4391 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
4392
4393         * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
4394
4395 2015-02-11  Pedro Alves  <palves@redhat.com>
4396
4397         * xcoffread.c (within_function): Delete.
4398
4399 2015-02-11  Tom Tromey  <tromey@redhat.com>
4400             Pedro Alves <palves@redhat.com>
4401
4402         * breakpoint.c (base_breakpoint_ops): Delete.
4403         * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
4404         * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
4405         * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
4406         * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
4407         * python/py-arch.c (arch_object_type): Make extern.
4408         * python/py-block.c (block_syms_iterator_object_type): Make extern.
4409         * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
4410         * python/py-cmd.c (cmdpy_object_type): Make extern.
4411         * python/py-continueevent.c (continue_event_object_type)
4412         * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
4413         parameter.  Update all callers.
4414         * python/py-evtregistry.c (eventregistry_object_type): Make extern.
4415         * python/py-exitedevent.c (exited_event_object_type): Make extern.
4416         * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
4417         * python/py-function.c (fnpy_object_type): Make extern.
4418         * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
4419         * python/py-infevents.c (call_pre_event_object_type)
4420         (inferior_call_post_event_object_type).
4421         (memory_changed_event_object_type): Make extern.
4422         * python/py-infthread.c (thread_object_type): Make extern.
4423         * python/py-lazy-string.c (lazy_string_object_type): Make extern.
4424         * python/py-linetable.c (linetable_entry_object_type)
4425         (linetable_object_type, ltpy_iterator_object_type): Make extern.
4426         * python/py-newobjfileevent.c (new_objfile_event_object_type)
4427         (clear_objfiles_event_object_type): Make extern.
4428         * python/py-objfile.c (objfile_object_type): Make extern.
4429         * python/py-param.c (parmpy_object_type): Make extern.
4430         * python/py-progspace.c (pspace_object_type): Make extern.
4431         * python/py-signalevent.c (signal_event_object_type): Make extern.
4432         * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
4433         * python/py-type.c (type_object_type, field_object_type)
4434         (type_iterator_object_type): Make extern.
4435         * python/python.c (python_extension_script_ops)
4436         (python_extension_ops): Make extern.
4437         * stap-probe.c (stap_probe_ops): Make extern.
4438
4439 2015-02-11  Pedro Alves  <pedro@codesourcery.com>
4440
4441         * infrun.c (adjust_pc_after_break): Don't adjust the PC just
4442         because the event thread is not the current thread.
4443
4444 2015-02-11  Doug Evans  <xdje42@gmail.com>
4445
4446         * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
4447         been initialized yet, return NULL.
4448
4449 2015-02-11  Doug Evans  <dje@google.com>
4450
4451         * symfile.h (new_symfile_objfile): Delete.
4452         * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
4453         All callers updated.
4454
4455 2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>
4456
4457         * tui/tui-io.c (tui_handle_resize_during_io): Call
4458         tui_update_gdb_sizes() after resizing the screen.
4459         * tui/tui.c (tui_enable): Resize the terminal before
4460         calling tui_update_gdb_sizes().
4461
4462 2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>
4463
4464         * tui/tui-io.c (tui_getc): Move cursor to the end of the command
4465         line before printing a newline.
4466
4467 2015-02-11  Mark Wielaard  <mjw@redhat.com>
4468
4469         * utils.c (producer_is_gcc): Return true or false.
4470
4471 2015-02-10  Mark Wielaard  <mjw@redhat.com>
4472
4473         * utils.h (producer_is_gcc): Change return type to bool. Add major
4474         argument.
4475         * utils.c (producer_is_gcc): Likewise.
4476         (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
4477         * dwarf2read.c (check_producer): Likewise.
4478
4479 2015-02-10  Pedro Alves  <palves@redhat.com>
4480
4481         * infrun.c (displaced_step_fixup): Switch to the event thread
4482         before calling gdbarch_displaced_step_fixup.
4483
4484 2015-02-10  Antoine Tremblay <antoine.tremblay@ericsson.com>
4485
4486         * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
4487
4488 2015-02-10  Simon Marchi  <simon.marchi@ericsson.com>
4489
4490         * ada-varobj.c (ada_name_of_child): Constify parent.
4491         (ada_path_expr_of_child): Same.
4492         (ada_value_of_child): Same.
4493         (ada_type_of_child): Same.
4494         * c-varobj.c (c_is_path_expr_parent): Same.
4495         (c_describe_child): Same.
4496         (c_name_of_child): Same.
4497         (c_value_of_child): Same.
4498         (c_type_of_child): Same.
4499         (cplus_number_of_children): Same.
4500         (cplus_describe_child): Constify var.
4501         (cplus_name_of_child): Constify parent.
4502         (cplus_value_of_child): Same.
4503         (cplus_type_of_child): Same.
4504         * jv-varobj.c (java_name_of_child): Same.
4505         (java_value_of_child): Same.
4506         (java_type_of_child): Same.
4507         * varobj.c (value_of_child): Same.
4508         (varobj_default_is_path_expr_parent): Constify var, parent and return
4509         value.
4510         (varobj_get_path_expr): Constify var, modify path_expr through
4511         mutable_var.
4512         (install_new_value): Constify parent.
4513         (value_of_child): Constify parent.
4514         * varobj.h (struct varobj): Constify parent.
4515         (struct lang_varobj_ops): Constify name_of_child, value_of_child and
4516         type_of_child.
4517         (varobj_get_path_expr): Constify var.
4518         (varobj_get_path_expr_parent): Constify var and return value.
4519
4520 2015-02-10  Luis Machado  <lgustavo@codesourcery.com>
4521
4522         * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
4523         (arm_prologue_this_id): Move PC and SP limit checks to
4524         arm_prologue_unwind_stop_reason.
4525         (arm_prologue_unwind) <stop_reason> : Set to
4526         arm_prologue_unwind_stop_reason.
4527
4528 2015-02-09  Mark Wielaard  <mjw@redhat.com>
4529
4530         * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
4531         DW_LANG_Fortran08 as language_fortran.
4532
4533 2015-02-09  Sergio Durigan Junior  <sergiodj@redhat.com>
4534
4535         PR remote/17946
4536         * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
4537         of pointer against char.
4538
4539 2015-02-09  Mark Wielaard  <mjw@redhat.com>
4540
4541         * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
4542         (c_type_print_modifier): Likewise.
4543         * dwarf2read.c (read_tag_atomic_type): New function.
4544         (read_type_die_1): Handle DW_TAG_atomic_type.
4545         * gdbtypes.c (make_atomic_type): New function.
4546         (recursive_dump_type): Handle TYPE_ATOMIC.
4547         * gdbtypes.h (enum type_flag_values): Renumber.
4548         (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
4549         (TYPE_ATOMIC): New macro.
4550         (make_atomic_type): Declare.
4551
4552 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4553
4554         * btrace.c (ftrace_find_call): Skip gaps.
4555         (ftrace_new_function): Initialize level.
4556         (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
4557         (ftrace_new_switch): Update
4558         level computation.
4559         (ftrace_new_gap): New.
4560         (ftrace_update_function): Create new function after gap.
4561         (btrace_compute_ftrace_bts): Create gap on error.
4562         (btrace_stitch_bts): Update parameters.  Clear trace if it
4563         becomes empty.
4564         (btrace_stitch_trace): Update parameters.  Update callers.
4565         (btrace_clear): Reset the number of gaps.
4566         (btrace_insn_get): Return NULL if the iterator points to a gap.
4567         (btrace_insn_number): Return zero if the iterator points to a gap.
4568         (btrace_insn_end): Allow gaps at the end.
4569         (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
4570         (btrace_find_insn_by_number): Assert that the found iterator does
4571         not point to a gap.
4572         (btrace_call_next, btrace_call_prev): Assert that the last function
4573         is not a gap.
4574         * btrace.h (btrace_bts_error): New.
4575         (btrace_function): Update comment.
4576         (btrace_function) <insn, insn_offset, number>: Update comment.
4577         (btrace_function) <errcode>: New.
4578         (btrace_thread_info) <ngaps>: New.
4579         (btrace_thread_info) <replay>: Update comment.
4580         (btrace_insn_get): Update comment.
4581         * record-btrace.c (btrace_ui_out_decode_error): New.
4582         (record_btrace_info): Print number of gaps.
4583         (btrace_insn_history, btrace_call_history): Call
4584         btrace_ui_out_decode_error for gaps.
4585         (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
4586
4587 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4588
4589         * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
4590         * nat/linux-btrace.c: (btrace_this_cpu): New.
4591         (cpu_supports_bts): Call btrace_this_cpu.
4592         (intel_supports_bts): Add cpu parameter.
4593
4594 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4595
4596         * btrace.h (btrace_insn_class): New.
4597         (btrace_insn) <size, iclass>: New.
4598         * btrace.c (ftrace_find_call): Update parameters.  Update users.
4599         Use instruction classification.
4600         (ftrace_new_return): Update parameters.  Update users.
4601         (ftrace_update_function): Update parameters.  Update users.  Use
4602         instruction classification.
4603         (ftrace_update_insns): Update parameters.  Update users.
4604         (ftrace_classify_insn): New.
4605         (btrace_compute_ftrace_bts): Fill in new btrace_insn fields.  Add
4606         TRY_CATCH around call to gdb_insn_length.
4607
4608 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4609
4610         * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
4611         Update parameters.  Update users.
4612
4613 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4614
4615         * btrace.c (parse_xml_btrace_conf_bts): Add size.
4616         (btrace_conf_bts_attributes): New.
4617         (btrace_conf_children): Add attributes.
4618         * common/btrace-common.h (btrace_config_bts): New.
4619         (btrace_config)<bts>: New.
4620         (btrace_config): Update comment.
4621         * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
4622         Use config.
4623         * features/btrace-conf.dtd: Increment version.  Add size
4624         attribute to bts element.
4625         * record-btrace.c (set_record_btrace_bts_cmdlist,
4626         show_record_btrace_bts_cmdlist): New.
4627         (record_btrace_adjust_size, record_btrace_print_bts_conf,
4628         record_btrace_print_conf, cmd_set_record_btrace_bts,
4629         cmd_show_record_btrace_bts): New.
4630         (record_btrace_info): Call record_btrace_print_conf.
4631         (_initialize_record_btrace): Add commands.
4632         * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
4633         (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
4634         (btrace_sync_conf): Synchronize bts size.
4635         (_initialize_remote): Add Qbtrace-conf:bts:size packet.
4636         * NEWS: Announce new commands and new packets.
4637
4638 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4639
4640         * Makefile.in (XMLFILES): Add btrace-conf.dtd.
4641         * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
4642         (x86_linux_btrace_conf): New.
4643         (x86_linux_create_target): Initialize to_btrace_conf.
4644         * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
4645         Check format.  Split into this and ...
4646         (linux_enable_bts): ... this.
4647         (linux_btrace_conf): New.
4648         (perf_event_skip_record): Renamed into ...
4649         (perf_event_skip_bts_record): ... this.  Updated users.
4650         (linux_disable_btrace): Split into this and ...
4651         (linux_disable_bts): ... this.
4652         (linux_read_btrace): Check format.
4653         * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
4654         (linux_btrace_conf): New.
4655         (btrace_target_info)<ptid>: Moved.
4656         (btrace_target_info)<conf>: New.
4657         (btrace_target_info): Split into this and ...
4658         (btrace_tinfo_bts): ... this.  Updated users.
4659         * btrace.c (btrace_enable): Update parameters.
4660         (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
4661         (btrace_conf_children, btrace_conf_attributes)
4662         (btrace_conf_elements): New.
4663         * btrace.h (btrace_enable): Update parameters.
4664         (btrace_conf, parse_xml_btrace_conf): New.
4665         * common/btrace-common.h (btrace_config): New.
4666         * feature/btrace-conf.dtd: New.
4667         * record-btrace.c (record_btrace_conf): New.
4668         (record_btrace_cmdlist): New.
4669         (record_btrace_enable_warn, record_btrace_open): Pass
4670         &record_btrace_conf.
4671         (record_btrace_info): Print recording format.
4672         (cmd_record_btrace_bts_start): New.
4673         (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
4674         (_initialize_record_btrace): Add "record btrace bts" subcommand.
4675         Add "record bts" alias command.
4676         * remote.c (remote_state)<btrace_config>: New.
4677         (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
4678         (remote_protocol_features): Add qXfer:btrace-conf:read.
4679         (remote_open_1): Call remote_btrace_reset.
4680         (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
4681         (btrace_target_info)<conf>: New.
4682         (btrace_sync_conf, btrace_read_config): New.
4683         (remote_enable_btrace): Update parameters.  Call btrace_sync_conf and
4684         btrace_read_conf.
4685         (remote_btrace_conf): New.
4686         (init_remote_ops): Initialize to_btrace_conf.
4687         (_initialize_remote): Add qXfer:btrace-conf packet.
4688         * target.c (target_enable_btrace): Update parameters.
4689         (target_btrace_conf): New.
4690         * target.h (target_enable_btrace): Update parameters.
4691         (target_btrace_conf): New.
4692         (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
4693         (target_ops)<to_enable_btrace>: Update parameters and comment.
4694         (target_ops)<to_btrace_conf>: New.
4695         * target-delegates: Regenerate.
4696         * target-debug.h (target_debug_print_const_struct_btrace_config_p)
4697         (target_debug_print_const_struct_btrace_target_info_p): New.
4698         * NEWS: Announce new command and new packet.
4699
4700 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4701
4702         * nat/linux-btrace.h (perf_event_buffer): New.
4703         (btrace_target_info) <buffer, size, data_head>: Replace with ...
4704         <bts>: ... this.
4705         * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
4706         (perf_event_buffer_size, perf_event_buffer_begin)
4707         (perf_event_buffer_end, linux_btrace_has_changed): Removed.
4708         Updated users.
4709         (perf_event_new_data): New.
4710
4711 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4712
4713         * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
4714         * record-btrace.c (record_btrace_open): Remove call to
4715         target_supports_btrace.
4716         * remote.c (remote_supports_btrace): Update parameters.
4717         * target.c (target_supports_btrace): Update parameters.
4718         * target.h (to_supports_btrace, target_supports_btrace): Update
4719         parameters.
4720         * target-delegates.c: Regenerate.
4721         * target-debug.h (target_debug_print_enum_btrace_format): New.
4722         * nat/linux-btrace.c
4723         (kernel_supports_btrace): Rename into ...
4724         (kernel_supports_bts): ... this.  Update users.  Update warning text.
4725         (intel_supports_btrace): Rename into ...
4726         (intel_supports_bts): ... this.  Update users.
4727         (cpu_supports_btrace): Rename into ...
4728         (cpu_supports_bts): ... this.  Update users.
4729         (linux_supports_btrace): Update parameters.  Split into this and ...
4730         (linux_supports_bts): ... this.
4731         * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
4732
4733 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4734
4735         * Makefile.in (SFILES): Add common/btrace-common.c.
4736         (COMMON_OBS): Add common/btrace-common.o.
4737         (btrace-common.o): Add build rules.
4738         * btrace.c (parse_xml_btrace): Update parameters.
4739         (parse_xml_btrace_block): Set format field.
4740         (btrace_add_pc, btrace_fetch): Use struct btrace_data.
4741         (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
4742         (btrace_compute_ftrace): Split into this and...
4743         (btrace_compute_ftrace_bts): ...this.
4744         (btrace_stitch_trace): Split into this and...
4745         (btrace_stitch_bts): ...this.
4746         * btrace.h (parse_xml_btrace): Update parameters.
4747         (make_cleanup_btrace_data): New.
4748         * common/btrace-common.c: New.
4749         * common/btrace-common.h: Include common-defs.h.
4750         (btrace_block_s): Update comment.
4751         (btrace_format): New.
4752         (btrace_format_string): New.
4753         (btrace_data_bts): New.
4754         (btrace_data): New.
4755         (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
4756         * remote.c (remote_read_btrace): Update parameters.
4757         * target.c (target_read_btrace): Update parameters.
4758         * target.h (target_read_btrace): Update parameters.
4759         (target_ops)<to_read_btrace>: Update parameters.
4760         * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
4761         * target-delegates.c: Regenerate.
4762         * target-debug (target_debug_print_struct_btrace_data_p): New.
4763         * nat/linux-btrace.c (linux_read_btrace): Split into this and...
4764         (linux_read_bts): ...this.
4765         * nat/linux-btrace.h (linux_read_btrace): Update parameters.
4766
4767 2015-02-06  Doug Evans  <dje@google.com>
4768
4769         * remote-m32r-sdi.c: Include symfile.h.
4770
4771 2015-02-06  Doug Evans  <dje@google.com>
4772
4773         * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
4774         * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
4775         to here.
4776
4777 2015-02-06  Pedro Alves  <palves@redhat.com>
4778
4779         * linux-thread-db.c (find_new_threads_callback): Add debug output.
4780
4781 2015-02-06  Simon Marchi  <simon.marchi@ericsson.com>
4782
4783         PR gdb/15678
4784         * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
4785         (enable_count_command): Check args for NULL value.
4786
4787 2015-02-05  Doug Evans  <xdje42@gmail.com>
4788
4789         * guile/scm-frame.c: Fix spelling errors in a comment.
4790
4791 2015-02-04  Jan Kratochvil  <jan.kratochvil@redhat.com>
4792
4793         * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
4794         * python/py-value.c (valpy_fetch_lazy): Use it.  Remove cast to the
4795         return type.
4796
4797 2015-02-04  Pedro Alves  <palves@redhat.com>
4798
4799         * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
4800         (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
4801         returns true.
4802         (resume_stopped_resumed_lwps): Don't check whether the thread is
4803         marked as executing.
4804         (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
4805
4806 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4807
4808         * regset.h (struct regset): Add flags field.
4809         (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
4810         * corelow.c (get_core_register_section): Add warning if the size
4811         exceeds the requested size and the regset does not have the
4812         REGSET_VARIABLE_SIZE flag set.
4813         * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
4814         flag.
4815         * armbsd-tdep.c (armbsd_gregset): Likewise.
4816         * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
4817         * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
4818         * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
4819         * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
4820
4821 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4822
4823         * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
4824         For ".reg-xstate", explicitly specify the requested section size
4825         via X86_XSTATE_SIZE instead of just 0 on input and
4826         X86_XSTATE_MAX_SIZE on output.
4827         * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
4828         Likewise.
4829
4830 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4831
4832         PR corefiles/17808:
4833         * gdbarch.sh (iterate_over_regset_sections_cb): Document this
4834         function type, particularly its SIZE parameter.
4835         * gdbarch.h: Regenerate.
4836         * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
4837         actual against required size using ">=" instead of "==".
4838         (amd64_collect_fpregset): Likewise.
4839         * i386-tdep.c (i386_supply_gregset): Likewise.
4840         (i386_collect_gregset): Likewise.
4841         (i386_supply_fpregset): Likewise.
4842         (i386_collect_fpregset): Likewise.
4843         * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
4844         (mips_fill_gregset_wrapper): Likewise.
4845         (mips_supply_fpregset_wrapper): Likewise.
4846         (mips_fill_fpregset_wrapper): Likewise.
4847         (mips64_supply_gregset_wrapper): Likewise.
4848         (mips64_fill_gregset_wrapper): Likewise.
4849         (mips64_supply_fpregset_wrapper): Likewise.
4850         (mips64_fill_fpregset_wrapper): Likewise.
4851         * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
4852         (am33_supply_fpregset_method): Likewise.
4853         (am33_collect_gregset_method): Likewise.
4854         (am33_collect_fpregset_method): Likewise.
4855
4856 2015-02-04  Doug Evans  <dje@google.com>
4857             Pedro Alves  <palves@redhat.com>
4858             Eli Zaretskii  <eliz@gnu.org>
4859
4860         PR tui/17810
4861         * tui/tui-command.c (tui_refresh_cmd_win): New function.
4862         * tui/tui-command.c (tui_refresh_cmd_win): Declare.
4863         * tui/tui-file.c: #include tui/tui-command.h.
4864         (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
4865         (tui_file_flush): Refresh command window if stream is gdb_stdout.
4866         * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
4867
4868 2015-02-04  Pedro Alves  <palves@redhat.com>
4869
4870         Fix build breakage.
4871         * event-loop.c (gdb_do_one_event): Add default switch case.
4872
4873 2015-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
4874
4875         Filter out inferior gcc option -fpreprocessed.
4876         * compile/compile.c (filter_args): New function.
4877         (get_args): Use it.
4878
4879 2015-02-03  Pedro Alves  <palves@redhat.com>
4880
4881         * event-loop.c: Don't declare nor define a queue type for
4882         gdb_event_p.
4883         (event_queue): Delete.
4884         (create_event, create_file_event, gdb_event_xfree)
4885         (initialize_event_loop, process_event): Delete.
4886         (gdb_do_one_event): Return as soon as one event is handled.
4887         (handle_file_event): Change prototype.  Used the passed in
4888         file_handler pointer and ready_mask instead of looping over all
4889         file handlers.
4890         (gdb_wait_for_event): Update the poll/select timeouts before
4891         blocking.  Run event handlers directly instead of queueing events.
4892         Return as soon as one event is handled.
4893         (struct async_event_handler_data): Delete.
4894         (invoke_async_event_handler): Delete.
4895         (check_async_event_handlers): Change return type to int.  Run
4896         event handlers directly instead of queueing events.  Return as
4897         soon as one event is handled.
4898         (handle_timer_event): Delete.
4899         (update_wait_timeout): New function, factored out from
4900         poll_timers.
4901         (poll_timers): Reimplement.
4902         * event-loop.h (initialize_event_loop): Delete declaration.
4903         * top.c (gdb_init): Don't call initialize_event_loop.
4904
4905 2015-02-03  Pedro Alves  <palves@redhat.com>
4906
4907         * event-loop.c (clear_async_event_handler): New function.
4908         * event-loop.h (clear_async_event_handler): New declaration.
4909         * record-btrace.c (record_btrace_async): New function.
4910         (init_record_btrace_ops): Install record_btrace_async.
4911         * record-full.c (record_full_async): New function.
4912         (record_full_resume): Don't mark the async event source here.
4913         (init_record_full_ops): Install record_full_async.
4914         (record_full_core_resume): Don't mark the async event source here.
4915         (init_record_full_core_ops): Install record_full_async.
4916         * remote.c (remote_async): Mark and clear the async stop reply
4917         queue event-loop token as appropriate.
4918
4919 2015-02-03  Pedro Alves  <palves@redhat.com>
4920
4921         * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
4922         target_is_async_p instead of target_can_async.
4923         (linux_nat_wait): Use target_is_async_p instead of
4924         target_can_async.  Don't enable async here.
4925         * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
4926         target_is_async_p instead of target_can_async.
4927
4928 2015-02-02  Simon Marchi  <simon.marchi@ericsson.com>
4929
4930         * varobj.h (lang_varobj_ops): Mention which return values need
4931         to be freed.
4932
4933 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
4934
4935         * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
4936
4937 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
4938
4939         PR gdb/17856:
4940         * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
4941         results found in the cache.
4942
4943 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
4944
4945         PR gdb/17854:
4946         * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
4947         when allocating a new one.
4948
4949 2015-02-01  Tom Tromey  <tom@tromey.com>
4950
4951         * MAINTAINERS: Remove myself.
4952
4953 2015-01-31  Doug Evans  <xdje42@gmail.com>
4954
4955         * dwarf2read.c (process_structure_scope): Update setting of
4956         TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
4957         * gdbtypes.c (internal_type_vptr_fieldno): New function.
4958         (set_type_vptr_fieldno): New function.
4959         (internal_type_vptr_basetype): New function.
4960         (set_type_vptr_basetype): New function.
4961         (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
4962         TYPE_VPTR_BASETYPE.
4963         (allocate_cplus_struct_type): Initialize vptr_fieldno.
4964         (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
4965         (print_cplus_stuff): ... moved here.
4966         (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
4967         * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
4968         moved to ...
4969         (struct cplus_struct_type): ... here.  All uses updated.
4970         (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
4971         (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
4972         (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
4973         * stabsread.c (read_tilde_fields): Update setting of
4974         TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
4975
4976 2015-01-31  Doug Evans  <xdje42@gmail.com>
4977
4978         * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
4979         to self_p.
4980         (cp_print_class_member): Rename local domain to self_type.
4981         * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
4982         domain_type to self_type.
4983         (set_die_type) <need_gnat_info>: Handle
4984         TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
4985         * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
4986         TYPE_SPECIFIC_SELF_TYPE.
4987         * gdbtypes.c (internal_type_self_type): New function.
4988         (set_type_self_type): New function.
4989         (smash_to_memberptr_type): Rename parameter domain to self_type.
4990         Update setting of TYPE_SELF_TYPE.
4991         (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
4992         (smash_to_method_type): Rename parameter domain to self_type.
4993         Update setting of TYPE_SELF_TYPE.
4994         (check_stub_method): Call smash_to_method_type.
4995         (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
4996         (copy_type_recursive): Ditto.
4997         * gdbtypes.h (enum type_specific_kind): New value
4998         TYPE_SPECIFIC_SELF_TYPE.
4999         (struct main_type) <type_specific>: New member self_type.
5000         (struct cplus_struct_type) <fn_field.type>: Update comment.
5001         (TYPE_SELF_TYPE): Rewrite.
5002         (internal_type_self_type, set_type_self_type): Declare.
5003         * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
5004         self_type.
5005         (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
5006         * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
5007         TYPE_TARGET_TYPE.
5008         * stabsread.c (read_member_functions): Mark methods with
5009         TYPE_CODE_METHOD, not TYPE_CODE_FUNC.  Update setting of
5010         TYPE_SELF_TYPE.
5011
5012 2015-01-31  Doug Evans  <xdje42@gmail.com>
5013
5014         * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
5015         All uses updated.
5016
5017 2015-01-31  Doug Evans  <xdje42@gmail.com>
5018
5019         * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
5020         or unions.  Return zero if union.
5021         (gnuv3_get_vtable): Call check_typedef.  Assert only passed structs.
5022         (gnuv3_rtti_type): Pass already-check_typedef'd value to
5023         gnuv3_get_vtable.
5024         (compute_vtable_size): Assert only passed structs.
5025         (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
5026
5027 2015-01-31  Doug Evans  <xdje42@gmail.com>
5028
5029         * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
5030         kinds.
5031
5032 2015-01-31  Gary Benson <gbenson@redhat.com>
5033             Doug Evans  <dje@google.com>
5034
5035         PR cli/9007
5036         PR cli/11920
5037         PR cli/15548
5038         * cli/cli-cmds.c (complete_command): Notify user if max-completions
5039         reached.
5040         * common/common-exceptions.h (enum errors)
5041         <MAX_COMPLETIONS_REACHED_ERROR>: New value.
5042         * completer.h (get_max_completions_reached_message): New declaration.
5043         (max_completions): Likewise.
5044         (completion_tracker_t): New typedef.
5045         (new_completion_tracker): New declaration.
5046         (make_cleanup_free_completion_tracker): Likewise.
5047         (maybe_add_completion_enum): New enum.
5048         (maybe_add_completion): New declaration.
5049         (throw_max_completions_reached_error): Likewise.
5050         * completer.c (max_completions): New global variable.
5051         (new_completion_tracker): New function.
5052         (free_completion_tracker): Likewise.
5053         (make_cleanup_free_completion_tracker): Likewise.
5054         (maybe_add_completions): Likewise.
5055         (throw_max_completions_reached_error): Likewise.
5056         (complete_line): Remove duplicates and limit result to max_completions
5057         entries.
5058         (get_max_completions_reached_message): New function.
5059         (gdb_display_match_list): Handle max_completions.
5060         (_initialize_completer): New declaration and function.
5061         * symtab.c: Include completer.h.
5062         (completion_tracker): New static variable.
5063         (completion_list_add_name): Call maybe_add_completion.
5064         (default_make_symbol_completion_list_break_on_1): Renamed from
5065         default_make_symbol_completion_list_break_on.  Maintain
5066         completion_tracker across calls to completion_list_add_name.
5067         (default_make_symbol_completion_list_break_on): New function.
5068         * top.c (init_main): Set rl_completion_display_matches_hook.
5069         * tui/tui-io.c: Include completer.h.
5070         (tui_old_rl_display_matches_hook): New static global.
5071         (tui_rl_display_match_list): Notify user if max-completions reached.
5072         (tui_setup_io): Save/restore rl_completion_display_matches_hook.
5073         * NEWS (New Options): Mention set/show max-completions.
5074
5075 2015-01-31  Gary Benson  <gbenson@redhat.com>
5076
5077         * symtab.c (struct add_name_data) <code>: New field.
5078         Updated comments.
5079         (add_symtab_completions): New function.
5080         (symtab_expansion_callback): Likewise.
5081         (default_make_symbol_completion_list_break_on): Set datum.code.
5082         Move minimal symbol scan before calling expand_symtabs_matching.
5083         Scan known primary symtabs for externs and statics before calling
5084         expand_symtabs_matching.  Pass symtab_expansion_callback as
5085         expansion_notify argument to expand_symtabs_matching.  Do not scan
5086         primary symtabs for externs and statics after calling
5087         expand_symtabs_matching.
5088
5089 2015-01-31  Gary Benson  <gbenson@redhat.com>
5090
5091         * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
5092         (struct quick_symbol_functions) <expand_symtabs_matching>:
5093         New argument expansion_notify.  All uses updated.
5094         (expand_symtabs_matching): New argument expansion_notify.
5095         All uses updated.
5096         * symfile-debug.c (debug_qf_expand_symtabs_matching):
5097         Also print expansion notify.
5098         * symtab.c (expand_symtabs_matching_via_partial): Call
5099         expansion_notify whenever a partial symbol table is expanded.
5100         * dwarf2read.c (dw2_expand_symtabs_matching): Call
5101         expansion_notify whenever a symbol table is instantiated.
5102
5103 2015-01-31  Doug Evans  <xdje42@gmail.com>
5104
5105         * cli-out.c: #include completer.h, readline/readline.h.
5106         (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
5107         (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
5108         (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
5109         * cli-out.h (cli_display_match_list): Declare.
5110         * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
5111         (ELLIPSIS_LEN): Ditto.
5112         (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
5113         (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
5114         (gdb_fnprint, gdb_print_filename): Ditto.
5115         (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
5116         (gdb_display_match_list): Ditto.
5117         * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
5118         (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
5119         (mld_beep_ftype, mld_read_key_ftype): Ditto.
5120         (match_list_displayer): New struct.
5121         (gdb_display_match_list): Declare.
5122         * top.c (init_main): Set rl_completion_display_matches_hook.
5123         * tui/tui-io.c: #include completer.h.
5124         (printable_part, PUTX, print_filename, get_y_or_n): Delete.
5125         (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
5126         (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
5127         (tui_mld_getc, tui_mld_read_key): Ditto.
5128         (tui_rl_display_match_list): Rewrite.
5129         (tui_handle_resize_during_io): New arg for_completion.  All callers
5130         updated.
5131
5132 2015-01-31  Doug Evans  <xdje42@gmail.com>
5133
5134         Add symbol lookup cache.
5135         * NEWS: Document new options and commands.
5136         * symtab.c (symbol_cache_key): New static global.
5137         (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
5138         (SYMBOL_LOOKUP_FAILED): New macro.
5139         (symbol_cache_slot_state): New enum.
5140         (block_symbol_cache): New struct.
5141         (symbol_cache): New struct.
5142         (new_symbol_cache_size, symbol_cache_size): New static globals.
5143         (hash_symbol_entry, eq_symbol_entry): New functions.
5144         (symbol_cache_byte_size, resize_symbol_cache): New functions.
5145         (make_symbol_cache, free_symbol_cache): New functions.
5146         (get_symbol_cache, symbol_cache_cleanup): New function.
5147         (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
5148         (symbol_cache_lookup, symbol_cache_clear_slot): New function.
5149         (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
5150         (symbol_cache_flush, symbol_cache_dump): New functions.
5151         (maintenance_print_symbol_cache): New function.
5152         (maintenance_flush_symbol_cache): New function.
5153         (symbol_cache_stats): New function.
5154         (maintenance_print_symbol_cache_statistics): New function.
5155         (symtab_new_objfile_observer): New function.
5156         (symtab_free_objfile_observer): New function.
5157         (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
5158         (_initialize_symtab): Init symbol_cache_key.  New parameter
5159         maint symbol-cache-size.  New maint commands print symbol-cache,
5160         print symbol-cache-statistics, flush-symbol-cache.
5161         Install new_objfile, free_objfile observers.
5162
5163 2015-01-31  Joel Brobecker  <brobecker@adacore.com>
5164
5165         PR symtab/17855
5166         * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
5167         to end.
5168
5169 2015-01-31  Doug Evans  <xdje42@gmail.com>
5170
5171         * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
5172         * auto-load.c: #include ctype.h.
5173         (struct auto_load_pspace_info): Replace member loaded_scripts with
5174         new members loaded_script_files, loaded_script_texts.
5175         (auto_load_pspace_data_cleanup): Update.
5176         (init_loaded_scripts_info): Update.
5177         (get_auto_load_pspace_data_for_loading): Update.
5178         (maybe_add_script_file): Renamed from maybe_add_script.  All callers
5179         updated.
5180         (maybe_add_script_text): New function.
5181         (clear_section_scripts): Update.
5182         (source_script_file, execute_script_contents): New functions.
5183         (source_section_scripts): Add support for
5184         SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
5185         (print_scripts): New function.
5186         (auto_load_info_scripts): Also print inlined scripts.
5187         (maybe_print_unsupported_script_warning): Renamed from
5188         unsupported_script_warning_print.  All callers updated.
5189         (maybe_print_script_not_found_warning): Renamed from
5190         script_not_found_warning_print.  All callers updated.
5191         * extension-priv.h (struct extension_language_script_ops): New member
5192         objfile_script_executor.
5193         * extension.c (ext_lang_objfile_script_executor): New function.
5194         * extension.h (objfile_script_executor_func): New typedef.
5195         (ext_lang_objfile_script_executor): Declare.
5196         * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
5197         * guile/guile.c (guile_extension_script_ops): Update.
5198         * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
5199         * python/python.c (python_extension_script_ops): Update.
5200         (gdbpy_execute_objfile_script): New function.
5201
5202 2015-01-31  Eli Zaretskii  <eliz@gnu.org>
5203
5204         * tui/tui-io.c (tui_expand_tabs): New function.
5205         (tui_puts, tui_redisplay_readline): Expand TABs into the
5206         appropriate number of spaces.
5207         * tui/tui-regs.c: Include tui-io.h.
5208         (tui_register_format): Call tui_expand_tabs to expand TABs into
5209         the appropriate number of spaces.
5210         * tui/tui-io.h: Add prototype for tui_expand_tabs.
5211
5212 2015-01-30  Doug Evans  <dje@google.com>
5213
5214         * NEWS: "info source" command now display producer string if present.
5215         * source.c (source_info): Print producer string if present.
5216
5217 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5218
5219         * varobj.c (varobj_delete): Fix comment.
5220
5221 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5222
5223         * varobj.c (create_child): Modify comment.
5224
5225 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5226
5227         * ada-varobj.c (ada_number_of_children): Constify struct varobj *
5228         parameter.
5229         (ada_name_of_variable): Same.
5230         (ada_path_expr_of_child): Same.
5231         (ada_value_of_variable): Same.
5232         (ada_value_is_changeable_p): Same.
5233         (ada_value_has_mutated): Same.
5234         * c-varobj.c (varobj_is_anonymous_child): Same.
5235         (c_is_path_expr_parent): Same.
5236         (c_number_of_children): Same.
5237         (c_name_of_variable): Same.
5238         (c_path_expr_of_child): Same.
5239         (get_type): Same.
5240         (c_value_of_variable): Same.
5241         (cplus_number_of_children): Same.
5242         (cplus_name_of_variable): Same.
5243         (cplus_path_expr_of_child): Same.
5244         (cplus_value_of_variable): Same.
5245         * jv-varobj.c (java_number_of_children): Same.
5246         (java_name_of_variable): Same.
5247         (java_path_expr_of_child): Same.
5248         (java_value_of_variable): Same.
5249         * varobj.c (number_of_children): Same.
5250         (name_of_variable): Same.
5251         (is_root_p): Same.
5252         (varobj_ensure_python_env): Same.
5253         (varobj_get_objname): Same.
5254         (varobj_get_expression): Same.
5255         (varobj_get_display_format): Same.
5256         (varobj_get_display_hint): Same.
5257         (varobj_has_more): Same.
5258         (varobj_get_thread_id): Same.
5259         (varobj_get_frozen): Same.
5260         (dynamic_varobj_has_child_method): Same.
5261         (varobj_get_gdb_type): Same.
5262         (is_path_expr_parent): Same.
5263         (varobj_default_is_path_expr_parent): Same.
5264         (varobj_get_language): Same.
5265         (varobj_get_attributes): Same.
5266         (varobj_is_dynamic_p): Same.
5267         (varobj_get_child_range): Same.
5268         (varobj_value_has_mutated): Same.
5269         (varobj_get_value_type): Same.
5270         (number_of_children): Same.
5271         (name_of_variable): Same.
5272         (check_scope): Same.
5273         (varobj_editable_p): Same.
5274         (varobj_value_is_changeable_p): Same.
5275         (varobj_floating_p): Same.
5276         (varobj_default_value_is_changeable_p): Same.
5277
5278 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5279
5280         * varobj.c (varobj_get_path_expr): Set var->path_expr.
5281         * c-varobj.c (c_path_expr_of_child): Set local var instead of
5282         child->path_expr.
5283         (cplus_path_expr_of_child): Same.
5284
5285 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5286
5287         * mi-cmd-var.c (print_varobj): Free varobj_get_expression
5288         result.
5289         (mi_cmd_var_info_expression): Same.
5290         * varobj.c (varobj_get_expression): Mention in the comment that
5291         the result must by freed by the caller.
5292
5293 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5294
5295         * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
5296         varobj_get_type.
5297         (varobj_update_one): Same.
5298         * varobj.c (update_type_if_necessary): Free curr_type_str and
5299         new_type_str.
5300         (varobj_get_type): Specify in comment that the result needs to be
5301         freed by the caller.
5302
5303 2015-01-29  Doug Evans  <dje@google.com>
5304
5305         PR symtab/17890
5306         * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
5307
5308 2015-01-25  Mark Wielaard  <mjw@redhat.com>
5309
5310         * dwarf2read.c (checkproducer): Call producer_is_gcc.
5311         * utils.c (producer_is_gcc_ge_4): Likewise.
5312         (producer_is_gcc): New function.
5313         * utils.h (producer_is_gcc): New declaration.
5314
5315 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
5316
5317         * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
5318         kind.
5319         * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
5320         parameter by "addr_stack" parameter.
5321         (resolve_dynamic_range): Replace "addr" parameter by
5322         "stack_addr" parameter.  Update function documentation.
5323         Update code accordingly.
5324         (resolve_dynamic_array, resolve_dynamic_union)
5325         (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
5326         (resolve_dynamic_type): Update code, following the changes made
5327         to resolve_dynamic_type_internal's interface.
5328         * dwarf2loc.h (struct property_addr_info): New.
5329         (dwarf2_evaluate_property): Replace "address" parameter
5330         by "addr_stack" parameter.  Adjust function documentation.
5331         (struct dwarf2_offset_baton): New.
5332         (struct dwarf2_property_baton): Update documentation of
5333         field "referenced_type" to be more general. New field
5334         "offset_info" in union data field.
5335         * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
5336         parameter by "addr_stack" parameter.  Adjust code accordingly.
5337         Add support for PROP_ADDR_OFFSET properties.
5338         * dwarf2read.c (attr_to_dynamic_prop): Add support for
5339         DW_AT_data_member_location attributes as well.  Use case
5340         statements instead of if/else condition.
5341
5342 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
5343
5344         * ada-varobj.c (ada_varobj_get_array_number_of_children):
5345         Return zero if PARENT_VALUE is NULL and parent_type's
5346         range type is dynamic.
5347
5348 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
5349
5350         * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
5351         nonzero if the type's subtype is dynamic.
5352         (resolve_dynamic_range): Also resolve the range's subtype.
5353
5354 2015-01-29  Alexander Klimov  <alserkli@inbox.ru>  (tiny patch)
5355
5356         Pushed by Joel Brobecker  <brobecker@adacore.com>.
5357         * symfile.c (unmap_overlay_command): Initialize sec to NULL.
5358
5359 2015-01-27  Doug Evans  <dje@google.com>
5360
5361         * NEWS: Mention gdb.Objfile.username.
5362         * python/py-objfile.c (objfpy_get_username): New function.
5363         (objfile_getset): Add "username".
5364
5365 2015-01-24  Mark Wielaard  <mjw@redhat.com>
5366
5367         * stack.c (return_command): Markup warning message with _.
5368
5369 2015-01-24  Doug Evans  <xdje42@gmail.com>
5370
5371         * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
5372
5373 2015-01-24  Jan Kratochvil  <jan.kratochvil@redhat.com>
5374
5375         Fix 100x slowdown regression on DWZ files.
5376         * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
5377         (struct line_header): Add offset and offset_in_dwz.
5378         (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
5379         (free_line_header_voidp): New declaration.
5380         (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
5381         functions.
5382         (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
5383         (handle_DW_AT_stmt_list): Use line_header_hash.
5384         (free_line_header_voidp): New function.
5385         (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
5386         (dwarf_decode_lines): New parameter decode_mapping, use it.
5387         (dwarf2_free_objfile): Free line_header_hash.
5388
5389 2015-01-23  Simon Marchi  <simon.marchi@ericsson.com>
5390
5391         PR gdb/17416
5392         * valops.c (value_rtti_indirect_type): Catch exception thrown by
5393         value_ind.
5394
5395 2015-01-15  Mark Wielaard  <mjw@redhat.com>
5396
5397         * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
5398         DW_AT_noreturn.
5399         * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
5400         calling_convention an 8 bit bit field.
5401         (TYPE_NO_RETURN): New macro.
5402         * infcmd.c (finish_command): Query if function does not return
5403         normally.
5404         * stack.c (return_command): Likewise.
5405
5406 2015-01-23  Pedro Alves  <palves@redhat.com>
5407
5408         * linux-nat.c (linux_is_async_p): New macro.
5409         (linux_nat_is_async_p):
5410         (linux_nat_terminal_inferior): Check whether the target can async
5411         instead of whether it is already async.
5412         (linux_nat_terminal_ours): Don't check whether the target is
5413         async.
5414         (linux_async_pipe): Use linux_is_async_p.
5415
5416 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
5417
5418         * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
5419         '-ascending'.
5420         * thread.c (tp_array_compar_ascending, tp_array_compar): New.
5421         (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
5422         Sort tp_array using tp_array_compar.
5423         (_initialize_thread): Extend thread_apply_all_command help.
5424
5425 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
5426
5427         * corelow.c (core_open): Call also thread_command.
5428         * gdbthread.h (thread_command): New prototype moved from ...
5429         * thread.c (thread_command): ... here.
5430         (thread_command): Make it global.
5431
5432 2015-01-22  Pedro Alves  <palves@redhat.com>
5433
5434         * configure.ac [*mingw32*]: Check $curses_found instead of
5435         $prefer_curses.
5436         * configure: Regenerate.
5437         * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
5438         HAVE_NCURSES_NCURSES_H checks.
5439
5440 2015-01-22  Eli Zaretskii  <eliz@gnu.org>
5441
5442         * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
5443         fails with the 1st arg NULL, try again with "unknown".  Don't test
5444         the "cup" capability: it isn't supported by the Windows port of
5445         ncurses, but the Windows console driver is still capable of
5446         supporting TUI.
5447
5448 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
5449
5450         * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
5451
5452 2015-01-22  Eli Zaretskii  <eliz@gnu.org>
5453
5454         * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
5455         (ALLDEPFILES): Remove irix5-nat.c.  These two are part of the
5456         reason that "make TAGS" is broken.
5457
5458 2015-01-22  Chen Gang  <gang.chen.5i5j@gmail.com>
5459
5460         * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
5461         and check additional store instructions.
5462
5463 2015-01-21  Wei-cheng Wang  <cole945@gmail.com>
5464
5465         * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
5466
5467 2015-01-21  Wei-cheng Wang  <cole945@gmail.com>
5468
5469         * ppc-linux-tdep.c (ppc_skip_trampoline_code,
5470         ppc_canonicalize_syscall, ppc_linux_syscall_record,
5471         ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
5472         * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5473         * rs6000-tdep.c (rs6000_epilogue_frame_cache,
5474         rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
5475         rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
5476         ppc_process_record_op19, ppc_process_record_op31,
5477         ppc_process_record_op59, ppc_process_record_op60,
5478         ppc_process_record_op63): Likewise.
5479
5480 2015-01-20  Joel Brobecker  <brobecker@adacore.com>
5481
5482         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
5483         (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
5484         strerror.
5485
5486 2015-01-20  Wei-cheng Wang  <cole945@gmail.com>
5487
5488         * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
5489         ppc_process_record_op31, ppc_process_record_op59,
5490         ppc_process_record_op60, ppc_process_record_op63,
5491         ppc_process_record): Fix -Wformat warning.
5492         * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
5493         Remove unused variables.
5494
5495 2015-01-20  Chen Gang  <gang.chen.5i5j@gmail.com>
5496
5497         * MAINTAINERS (Write After Approval): Add "Chen Gang".
5498
5499 2015-01-19  Eli Zaretskii  <eliz@gnu.org>
5500
5501         * configure.ac [*mingw32*]: Only add windows-termcap.o to
5502         CONFIG_OBS if not building with a curses library.
5503         * configure: Regenerate.
5504
5505         * windows-termcap.c: Include defs.h.  Make the whole body empty if
5506         either one of HAVE_CURSES_H or HAVE_NCURSES_H or
5507         HAVE_NCURSES_NCURSES_H is defined.
5508
5509 2015-01-19  Joel Brobecker  <brobecker@adacore.com>
5510
5511         * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
5512         from end of line to start of next line.
5513
5514 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
5515
5516         * ppc-linux-tdep.c (ppc_skip_trampoline_code):
5517         Scan PLT stub backward for reverse debugging.
5518         * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5519
5520 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
5521             Ulrich Weigand  <uweigand@de.ibm.com>
5522
5523         * configure.tgt (powerpc*-*-linux): Add linux-record.o to
5524         gdb_target_obs.
5525         (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
5526         record.
5527         (ppc_canonicalize_syscall, ppc_linux_syscall_record,
5528         ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
5529         (ppc_linux_init_abi): Set process_record, process_record_signal.
5530         * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
5531         ppc_linux_record_tdep to gdbarch_tdep.
5532         (ppc_process_record): New declaration.
5533         * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
5534         ppc_process_record_op19, ppc_process_record_op31,
5535         ppc_process_record_op59, ppc_process_record_op60,
5536         ppc_process_record_op63, ppc_process_record): New functions.
5537
5538 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
5539
5540         * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
5541         rs6000_in_function_epilogue_frame_p and add an argument
5542         for frame_info.
5543         (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
5544         rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
5545         New functions.
5546         (rs6000_epilogue_frame_unwind): New.
5547         (rs6000_gdbarch_init): Append epilogue unwinder.
5548
5549 2015-01-16  Sergio Durigan Junior  <sergiodj@redhat.com>
5550
5551         * nat/linux-personality.c: Replace "#ifndef
5552         HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
5553         !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
5554         systems.
5555
5556 2015-01-16  Eli Zaretskii  <eliz@gnu.org>
5557
5558         * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
5559         functions.
5560         (_initialize_tui_win) <border-kind, border-mode>:
5561         <active-border-mode>: Use tui_set_var_cmd as the "set" function.
5562         (tui_set_tab_width_command): Fix the commentary.
5563
5564         * tui/tui-win.h: Add prototype for tui_rehighlight_all.
5565
5566         * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
5567         Doc fix.
5568         (tui_set_tab_width_command): Delete and recreate the source and
5569         the disassembly windows, to show the effect of the changed tab
5570         size immediately.
5571
5572         * tui/tui-data.h (LINE_PREFIX): Make shorter
5573         (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
5574         "Thread NNNNN.XXXX" thread ID notation on Windows.
5575
5576 2015-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
5577
5578         Fix gcc-5 compilation.
5579         * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
5580
5581 2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>
5582
5583         * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
5584         (linux-personality.o): New rule.
5585         * common/common-defs.h: Include <stdint.h>.
5586         * config/aarch64/linux.mh (NATDEPFILES): Include
5587         linux-personality.o.
5588         * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
5589         * config/arm/linux.mh (NATDEPFILES): Likewise.
5590         * config/i386/linux64.mh (NATDEPFILES): Likewise.
5591         * config/i386/linux.mh (NATDEPFILES): Likewise.
5592         * config/ia64/linux.mh (NATDEPFILES): Likewise.
5593         * config/m32r/linux.mh (NATDEPFILES): Likewise.
5594         * config/m68k/linux.mh (NATDEPFILES): Likewise.
5595         * config/mips/linux.mh (NATDEPFILES): Likewise.
5596         * config/pa/linux.mh (NATDEPFILES): Likewise.
5597         * config/powerpc/linux.mh (NATDEPFILES): Likewise.
5598         * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
5599         * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
5600         * config/s390/linux.mh (NATDEPFILES): Likewise.
5601         * config/sparc/linux64.mh (NATDEPFILES): Likewise.
5602         * config/sparc/linux.mh (NATDEPFILES): Likewise.
5603         * config/tilegx/linux.mh (NATDEPFILES): Likewise.
5604         * config/xtensa/linux.mh (NATDEPFILES): Likewise.
5605         * defs.h: Remove #include <stdint.h> (moved to
5606         common/common-defs.h).
5607         * linux-nat.c: Include nat/linux-personality.h.  Remove #include
5608         <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
5609         nat/linux-personality.c).
5610         (linux_nat_create_inferior): Remove code to disable address space
5611         randomization (moved to nat/linux-personality.c).  Create cleanup
5612         to disable address space randomization.
5613         * nat/linux-personality.c: New file.
5614         * nat/linux-personality.h: Likewise.
5615
5616 2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>
5617
5618         * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
5619         common/posix-strerror.c.
5620         (posix-strerror.o): New rule.
5621         (mingw-strerror.o): Likewise.
5622         * common/common-utils.h (safe_strerror): Move prototype to here,
5623         from utils.h.
5624         * common/common.host: New file.
5625         * common/mingw-strerror.c: Likewise.
5626         * common/posix-strerror.c: Likewise.
5627         * configure: Regenerated.
5628         * configure.ac: Source common/common.host.  Add variable
5629         common_host_obs to gdb_host_obs.
5630         * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
5631         gdb/common/posix-strerror.c when warning about the use of
5632         strerror.
5633         * mingw-hdep.c (safe_strerror): Remove definition; move it to
5634         common/mingw-strerror.c.
5635         * posix-hdep.c (safe_strerror): Remove definition; move it to
5636         common/posix-hdep.c.
5637         * utils.h (safe_strerror): Remove prototype; move to
5638         common/common-utils.h.
5639
5640 2015-01-15  Joel Brobecker  <brobecker@adacore.com>
5641
5642         GDB 7.8.2 released.
5643
5644 2015-01-15  Joel Brobecker  <brobecker@adacore.com>
5645
5646         * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
5647         ___XA type if the array has already been fixed.
5648
5649 2015-01-14  Yao Qi  <yao@codesourcery.com>
5650
5651         * Makefile.in (ppc-linux.o): New rule.
5652         * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
5653         * configure.ac: AC_CHECK_FUNCS(getauxval).
5654         * config.in: Re-generated.
5655         * configure: Re-generated.
5656         * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
5657         Declare.
5658         * nat/ppc-linux.c: New file.
5659         * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
5660         Call ppc64_64bit_inferior_p.
5661
5662 2015-01-14  Yao Qi  <yao@codesourcery.com>
5663
5664         * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
5665         nat/ppc-linux.h.
5666         (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
5667         (PPC_FEATURE_HAS_DFP): Likewise.
5668         (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
5669         (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
5670         (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
5671         Include "nat/ppc-linux.h".
5672         * nat/ppc-linux.h: New file.
5673         * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
5674
5675 2015-01-14  Pedro Alves  <palves@redhat.com>
5676
5677         PR gdb/17525
5678         * breakpoint.c: Include "interps.h".
5679         (bpstat_do_actions_1): Also check whether the interpreter is
5680         async.
5681
5682 2015-01-14  Pedro Alves  <palves@redhat.com>
5683
5684         PR cli/17828
5685         * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
5686         reinstall if the interpreter is sync.
5687
5688 2015-01-13  Doug Evans  <dje@google.com>
5689
5690         * objfiles.c (objfile_filename): New function.
5691         * objfiles.h (objfile_filename): Declare it.
5692         (objfile_name): Add function comment.
5693         * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
5694         bfd file name (which may be realpath'd), and the original name.
5695
5696 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
5697
5698         * NEWS: Create a new section for the next release branch.
5699         Rename the section of the current branch, now that it has
5700         been cut.
5701
5702 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
5703
5704         GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
5705         * version.in: Bump version to 7.9.50.DATE-cvs.
5706
5707 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
5708
5709         * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
5710         Remove trailing new-line in argument of call to warning.
5711
5712 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
5713
5714         * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
5715         new-line in argument of call to "warning".
5716
5717 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
5718
5719         * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
5720         in static block, then try searching for primitive types.
5721
5722 2015-01-12  Patrick Palka  <patrick@parcs.ath.cx>
5723
5724         * top.h (gdb_add_history): Declare.
5725         * top.c (command_count): New variable.
5726         (gdb_add_history): New function.
5727         (gdb_safe_append_history): New static function.
5728         (quit_force): Call it.
5729         (command_line_input): Use gdb_add_history instead of
5730         add_history.
5731         * event-top.c (command_line_handler): Likewise.
5732
5733 2015-01-12  James Clarke  <jrtc27@jrtc27.com>  (tiny patch)
5734
5735         PR gdb/17046
5736         * darwin-nat.c: Replace <machine/setjmp.h> #include by
5737         <setjmp.h> #include.
5738
5739 2015-01-11  Doug Evans  <xdje42@gmail.com>
5740
5741         * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
5742
5743 2015-01-11  Doug Evans  <xdje42@gmail.com>
5744
5745         PR gdb/15830
5746         * NEWS: The "maint demangle" command is renamed as "demangle".
5747         * demangle.c: #include cli/cli-utils.h, language.h.
5748         (demangle_command): New function.
5749         (_initialize_demangle): Add new command "demangle".
5750         * maint.c (maintenance_demangle): Stub out.
5751         (_initialize_maint_cmds): Update help text for "maint demangle",
5752         and mark as deprecated.
5753
5754 2015-01-11  Mark Kettenis  <kettenis@gnu.org>
5755
5756         * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
5757         inferior_thread is a function.
5758
5759 2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>
5760
5761         * Makefile.in (.y.c): Don't munge yacc's #line
5762         directives.
5763
5764 2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>
5765
5766         * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
5767         to prompt for input.
5768         * tui/tui-hooks.c (tui_query_hook): Remove.
5769         (tui_install_hooks): Don't set deprecated_query_hook.
5770         * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
5771         height calculation.  Always update the command window's cur_line.
5772
5773 2015-01-09  Pedro Alves  <palves@redhat.com>
5774
5775         * breakpoint.c (hardware_breakpoint_inserted_here_p): New
5776         function.
5777         * breakpoint.h (hardware_breakpoint_inserted_here_p): New
5778         declaration.
5779         * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
5780         (linux_resume_one_lwp): Store the thread's PC.  Adjust to clear
5781         stop_reason.
5782         (check_stopped_by_watchpoint): New function.
5783         (save_sigtrap): Reimplement.
5784         (linux_nat_stopped_by_watchpoint): Adjust.
5785         (linux_nat_lp_status_is_event): Delete.
5786         (stop_wait_callback): Only call save_sigtrap after storing the
5787         pending status.
5788         (status_callback): If the thread had been stopped for a breakpoint
5789         that has since been removed, discard the event and resume the LWP.
5790         (count_events_callback, select_event_lwp_callback): Use
5791         lwp_status_pending_p instead of linux_nat_lp_status_is_event.
5792         (cancel_breakpoint): Rename to ...
5793         (check_stopped_by_breakpoint): ... this.  Record whether the LWP
5794         stopped for a software breakpoint or hardware breakpoint.
5795         (select_event_lwp): Only give preference to the stepping LWP in
5796         all-stop mode.  Adjust comments.
5797         (stop_and_resume_callback): Remove references to new_pending_p.
5798         (linux_nat_filter_event): Likewise.  Leave exit events of the
5799         leader thread pending here.  Handle signal short circuiting here.
5800         Only call save_sigtrap after storing the pending waitstatus.
5801         (linux_nat_wait_1): Remove 'retry' label.  Remove references to
5802         new_pending.  Don't handle leaving events the caller is not
5803         interested in pending here, nor handle signal short-circuiting
5804         here.  Also give equal priority to all LWPs that have had events
5805         in non-stop mode.  If reporting a software breakpoint event,
5806         unadjust the LWP's PC.
5807         * linux-nat.h (enum lwp_stop_reason): New.
5808         (struct lwp_info) <stop_pc>: New field.
5809         (struct lwp_info) <stopped_by_watchpoint>: Delete field.
5810         (struct lwp_info) <stop_reason>: New field.
5811         * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
5812
5813 2015-01-09  Pedro Alves  <palves@redhat.com>
5814
5815         * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
5816         Set the LWP's 'resumed' flag.
5817
5818 2015-01-09  Pedro Alves  <palves@redhat.com>
5819
5820         * linux-nat.c (linux_resume_one_lwp): New function.
5821         (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
5822         (linux_nat_resume): Use lwp_status_pending_p and
5823         linux_resume_one_lwp.
5824         (linux_handle_syscall_trap): Use linux_resume_one_lwp.
5825         (linux_handle_extended_wait): Use linux_resume_one_lwp.
5826         (status_callback, running_callback): Use lwp_status_pending_p.
5827         (lwp_status_pending_p): New function.
5828         (stop_and_resume_callback): Use lwp_status_pending_p.
5829         (linux_nat_filter_event): Use linux_resume_one_lwp.
5830         (linux_nat_wait_1): Always use status_callback to look for an LWP
5831         with a pending status.  Use linux_resume_one_lwp.
5832         (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
5833         linux_resume_one_lwp.
5834
5835 2015-01-09  Pedro Alves  <palves@redhat.com>
5836
5837         * breakpoint.c (bp_location_inserted_here_p): New function,
5838         factored out from ...
5839         (breakpoint_inserted_here_p): ... here.  Use
5840         ALL_BP_LOCATIONS_AT_ADDR.
5841         (software_breakpoint_inserted_here_p): Use
5842         bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
5843
5844 2014-01-09  Pedro Alves  <palves@redhat.com>
5845
5846         Skip enabling event reporting if the kernel supports
5847         PTRACE_EVENT_CLONE.
5848         * linux-thread-db.c: Include "nat/linux-ptrace.h".
5849         (thread_db_use_events): New function.
5850         (try_thread_db_load_1): Check thread_db_use_events before enabling
5851         event reporting.
5852         (update_thread_state): New function.
5853         (attach_thread): Use it.  Check thread_db_use_events before
5854         enabling event reporting.
5855         (thread_db_detach): Check thread_db_use_events before disabling
5856         event reporting.
5857         (find_new_threads_callback): Check thread_db_use_events before
5858         enabling event reporting.  Update the thread's state if not using
5859         libthread_db events.
5860
5861 2015-01-09  Pedro Alves  <palves@redhat.com>
5862
5863         * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
5864         about to wait for is > 0.
5865         * linux-thread-db.c (find_new_threads_callback): Ignore thread if
5866         the kernel thread ID is -1.
5867
5868 2015-01-09  Pedro Alves  <palves@redhat.com>
5869
5870         * linux-nat.c (attach_proc_task_lwp_callback): New function.
5871         (linux_nat_attach): Use linux_proc_attach_tgid_threads.
5872         (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
5873         ptrace option flags.
5874         * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
5875         field.
5876         * nat/linux-procfs.c: Include <dirent.h>.
5877         (linux_proc_get_int): New parameter "warn".  Handle it.
5878         (linux_proc_get_tgid): Adjust.
5879         (linux_proc_get_tracerpid): Rename to ...
5880         (linux_proc_get_tracerpid_nowarn): ... this.
5881         (linux_proc_pid_get_state): New function, factored out from
5882         (linux_proc_pid_has_state): ... this.  Add new parameter "warn"
5883         and handle it.
5884         (linux_proc_pid_is_gone): New function.
5885         (linux_proc_pid_is_stopped): Adjust.
5886         (linux_proc_pid_is_zombie_maybe_warn)
5887         (linux_proc_pid_is_zombie_nowarn): New functions.
5888         (linux_proc_pid_is_zombie): Use
5889         linux_proc_pid_is_zombie_maybe_warn.
5890         (linux_proc_attach_tgid_threads): New function.
5891         * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
5892         (linux_proc_get_tracerpid): Rename to ...
5893         (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
5894         (linux_proc_pid_is_gone): New declaration.
5895         (linux_proc_pid_is_zombie): Update comment.
5896         (linux_proc_pid_is_zombie_nowarn): New declaration.
5897         (linux_proc_attach_lwp_func): New typedef.
5898         (linux_proc_attach_tgid_threads): New declaration.
5899         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
5900         use nowarn functions.
5901         (linux_ptrace_attach_fail_reason_string): Move here from
5902         gdbserver/linux-low.c and rename.
5903         (ptrace_supports_feature): If the current ptrace options are not
5904         known yet, check them now, instead of asserting.
5905         * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
5906         Declare.
5907
5908 2015-01-09  Pedro Alves  <palves@redhat.com>
5909
5910         * linux-thread-db.c (thread_db_find_new_threads_silently)
5911         (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
5912         (find_new_threads_once): Print debug output on gdb_stdlog.
5913
5914 2015-01-09  Chen Gang  <gang.chen.5i5j@gmail.com>
5915             Pedro Alves  <palves@redhat.com>
5916
5917         * compile/compile.c: Include "gdb_wait.h".
5918         (do_rmdir): Check return value, and free 'zap'.
5919
5920 2015-01-08  Pedro Alves  <palves@redhat.com>
5921             Yao Qi  <yao@codesourcery.com>
5922
5923         * dwarf2loc.c (indirect_pieced_value): Don't call
5924         gdb_sign_extend.  Call extract_signed_integer instead.
5925         * utils.c (gdb_sign_extend): Remove.
5926         * utils.h (gdb_sign_extend): Remove declaration.
5927
5928 2015-01-07  Pierre Muller  <muller@sourceware.org>
5929
5930         PR symtab/17811
5931         * stabsread.c (define_symbol): Set language for C++ special symbols.
5932
5933 2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>
5934
5935         * inflow.c (initial_gdb_ttystate): Tweak comment.
5936
5937 2015-01-07  Joel Brobecker  <brobecker@adacore.com>
5938
5939         * inflow.c (set_initial_gdb_ttystate): Add empty line after
5940         comment documenting function.
5941
5942 2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>
5943
5944         * terminal.h (set_initial_gdb_ttystate): Declare.
5945         * inflow.c (initial_gdb_ttystate): New static variable.
5946         (set_initial_gdb_ttystate): New setter.
5947         (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
5948         instead of our current terminal state.
5949         * top.c (gdb_init): Call set_initial_gdb_ttystate.
5950
5951 2015-01-07  Joel Brobecker  <brobecker@adacore.com>
5952
5953         * guile/scm-type.c (tyscm_array_1): Add comment.
5954         * python/py-type.c (typy_array_1): Add comment.
5955
5956 2015-01-06  Joel Brobecker  <brobecker@adacore.com>
5957
5958         * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
5959         error if N2 is equal to N1 - 1.
5960
5961 2015-01-06  Joel Brobecker  <brobecker@adacore.com>
5962
5963         * python/py-type.c (typy_array_1): Do not raise negative-length
5964         exception if N2 is equal to N1 - 1.
5965
5966 2015-01-03  Doug Evans  <xdje42@gmail.com>
5967
5968         * c-exp.y: Whitespace cleanup.
5969         (classify_inner_name): Remove extra ;.
5970
5971 2015-01-02  Maciej W. Rozycki  <macro@codesourcery.com>
5972
5973         * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
5974         offset signed.
5975
5976 2015-01-02  Doug Evans  <dje@google.com>
5977
5978         * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
5979
5980 2015-01-02  Doug Evans  <dje@google.com>
5981
5982         * symtab.h (struct symbol): Fix typo in comment.
5983
5984 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
5985
5986         Update year range in copyright notice of all files.
5987
5988 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
5989
5990         * top.c (print_gdb_version): Update copyright year to 2015.
5991
5992 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
5993
5994         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
5995
5996 For older changes see ChangeLog-2014.
5997 \f
5998 Local Variables:
5999 mode: change-log
6000 left-margin: 8
6001 fill-column: 74
6002 version-control: never
6003 coding: utf-8
6004 End: