1 Wed Jul 19 13:15:32 1995 Kung Hsu <kung@mexican.cygnus.com>
3 * remote.c (remote_wait): When getting registers, check endianess and
4 do conversion if necessary.
6 Tue Jul 18 00:41:31 1995 Jeff Law (law@snake.cs.utah.edu)
8 * gdbserver/low-hppabsd.c: New file.
9 * gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
10 * config/hppabsd.mh (XDEPFILES): Add ser-tcp.o
11 (GDBSERVER_DEPFILES): Add low-hppabsd.o
12 * config/hppaosf.mh: LIkewise.
14 Mon Jul 17 21:35:18 1995 Fred Fish <fnf@cygnus.com>
16 * dache.c (struct dcache_block): Change data member from unsigned char
17 to char, since everything passed in and out of dcache is char or casted
18 to appropriate type anyway.
19 (dcache_alloc): Move assignment of db out of test and combine separate
21 (dcache_peek_byte): Change ptr from unsigned char* to char*.
22 (dcache_peek_byte): Remove now unnecessary cast in read_memory call.
23 (dcache_peek): Change cast of incoming data arg.
24 (dcache_poke): Change cast of addr of incoming data arg.
25 (dcache_info): Mask data passed to printf_filtered to lsbyte only.
26 (dcache_info): Change printf_filtered arg from "% 2x" to " %2x".
27 * target.c (debug_to_thread_alive): Change return type to int and
28 return zero, for type compatibility with other *_thread_alive funcs.
29 (cleanup_target): Change cast of ignore function to match type of the
30 to_thread_alive member.
31 * defs.h (error_hook): Add ATTR_NORETURN.
32 * defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to
33 __attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug.
34 * remote.c (remote_wait): Cast first arg to strtol, strchr, and strncmp
35 to "const char *" from "unsigned char *".
36 (remote_wait): Cast arg to putpkt and strcpy from "unsigned char *" to
38 (remote_wait): Change printf format for long arg from "%d" to "%ld".
39 (getpkt): Remove unused variable "bp".
40 (remote_fetch_word, remote_store_word): Ifdef out apparently unused
42 * breakpoint.c (watchpoint_check): Removed unused variables
43 "saved_level" and "saved_frame".
44 * valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and
45 default cases to switch for completeness.
46 * infrun.c (wait_for_inferior): Enclose "have_waited" label
47 in #ifdef that matches the one in which it is referenced.
48 * ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise
49 unused variable "state" in #ifdef that matches one in which it is
51 * eval.c (evaluate_subexp_standard): Remove unused variable "var".
52 * eval.c (evaluate_subexp_standard): Remove unused variable "tmp_symbol".
53 * valarith.c (value_subscript): Remove unused variable "lowerbound",
54 which is redeclared in a nested scope prior to use.
55 * printcmd.c (print_frame_nameless_args): Use "%ld" to print long
57 * {mem-break.c, remote-pa.c, remote.c, saber.suppress}:
58 Remove unused static var "check_break_insn_size".
59 * buildsym.c (finish_block): Add other enum LOC_* and default
60 cases to switch for completeness.
61 ch-lang.c (type_lower_upper): Removed unused label "retry".
62 Add other enum TYPE_* and default cases to switch for completeness.
63 * f-typeprint.c (f_type_print_args): Ifdef out unused function
64 that may be used someday when Fortran support is complete.
65 * ch-valprint.c (chill_print_type_scalar): Add other enum
66 TYPE_* and default cases to switch for completeness.
67 (chill_val_print): Remove unused local var "high_bound" that
68 is redeclared in a nested scope prior to use.
69 (chill_var_print): Use "%ld" to print long arg, not "%d".
70 * regex.c (re_compile_fastmap, re_match_2): Add remaining enum types
71 and default to switches for completeness.
72 * minsyms.c (lookup_minimal_symbol_text): Delete unused variable
74 (prim_record_minimal_symbol_and_info): Return NULL rather than trash.
75 * elfread.c (elf_symtab_read): Don't dereference NULL returns from
76 record_minimal_symbol_and_info.
77 * f-lang.c (saved_function_list_end): Ifdef out unused variable
78 that may be used someday.
79 * f-valprint.c (f_val_print): Remove unused local variable "straddr".
81 Mon Jul 17 13:08:00 1995 Ian Lance Taylor <ian@cygnus.com>
83 * stabsread.h (struct stab_section_list): Define.
84 (coffstab_build_psymtabs): Remove staboff and stabsize parameters.
85 Add textaddr, textsize, and stabs parameters.
86 * gdb-stabs.h (struct dbx_symfile_info): Remove text_sect field.
87 Add text_addr and text_size fields.
88 (DBX_TEXT_SECT): Don't define.
89 (DBX_TEXT_ADDR, DBX_TEXT_SIZE): Define.
90 * coffread.c: Include <ctype.h>.
91 (struct coff_symfile_info): Remove stabsect and stabindexsect
92 fields. Add textaddr, textsize, and stabsects fields.
93 (coff_locate_sections): Record the address of the .text section,
94 and total the sizes of all sections with names beginning with
95 ".text". Don't bother to record a .stab.index section (COFF
96 doesn't use them). Make a linked list of all sections with names
97 beginning with ".stab".
98 (coff_symfile_read): Adjust call to coffstab_build_psymtabs for
100 * dbxread.c (dbx_symfile_read): Use DBX_TEXT_ADDR and
101 DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
102 (dbx_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
104 (elfstab_build_psymtabs): Likewise.
105 (stabsect_build_psymtabs): Likewise.
106 (symbuf_sections, symbuf_left, symbuf_read): New static variables.
107 (fill_symbuf): If symbuf_sections is not NULL, read symbols from
109 (coffstab_build_psymtabs): Remove staboffset and stabsize
110 parameters. Add textaddr, textsize, and stabsects parameters.
111 Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not DBX_TEXT_SECT. Handle
112 multiple stabs sections.
113 * os9kread.c (os9k_symfile_read): Use DBX_TEXT_ADDR and
114 DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
115 (os9k_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
118 * remote-vx.c (vx_ops, vx_run_ops): Initialize new to_thread_alive
121 Sat Jul 15 01:02:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
123 * config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: New files
124 for OSF/1-3.x procfs support.
125 * configure.in (alpha-dec-osf): Use them when configuring
127 * configure: Updated.
128 * target.c: Include <string.h>.
130 Fri Jul 14 16:16:56 1995 J.T. Conklin <jtc@rtl.cygnus.com>
132 * Makefile.in, configure.in: Use one variable, frags, to hold
133 pathnames of makefile fragments.
134 * configure: regenerated.
136 Fri Jul 14 09:49:47 1995 Jeff Law (law@snake.cs.utah.edu)
138 * procfs.c (procfs_ops): Fix typo in last change.
140 Thu Jul 13 13:42:38 1995 Jeffrey A. Law <law@rtl.cygnus.com>
142 * inftarg.c (child_thread_alive): New function to see if a
143 particular thread is still running.
144 (child_ops): Add child_thread_alive entry.
145 * remote.c (remote_thread_alive): New function to see if a
146 particular thread is still alive.
147 (remote_ops): Add remote_thread_alive.
148 * target.c (dummy_target): Add dummy entry for thread_alive.
149 (cleanup_target): de_fault thread_alive too.
150 (update_current_target): INHERIT thread_alive too.
151 (debug_to_thread_alive): New function.
152 (setup_target_debug): Add debug_to_thread_alive.
153 * target.h (struct target_ops): Add to_thread_alive.
154 (target_thread_alive): Define.
155 * thread.c (info_threads_command): Don't call kill; use
156 target_thread_alive instead.
157 * config/nm-lynx.h (CHILD_THREAD_ALIVE): Define.
158 * gdbserver/low-lynx.c (mythread_alive): New function.
159 (mywait): Don't restart any threads after a new thread notification,
160 let the generic code handle it.
161 * gdbserver/low-sparc.c (mythread_alive): Dummy version.
162 * gdbserver/low-sun3.c (mythread_alive): Likewise.
163 * gdbserver/server.c (main): Handle thread_alive requests.
164 * gdbserver/server.h (mythread_alive): Declare.
165 * corelow.c (core_ops): Add dummy entry for thread_alive.
166 * exec.c (exec_ops): Likewise.
167 * m3-nat.c (m3_ops): Likewise.
168 * monitor.c (monitor_ops): Likewise.
169 * procfs.c (procfs_ops): Likewise.
170 * remote-arc.c (arc_ops): Likewise.
171 * remote-array.c (array_ops): Likewise.
172 * remote-e7000.c (e7000_ops): Likewise.
173 * remote-es.c (es1800_ops, es1800_child_ops): Likewise.
174 * remote-mips.c (mips_ops): Likewise.
175 * remote-pa.c (remote_hppro_ops): Likewise.
176 * remote-sim.c (gdbsim_ops): Likewise.
177 * sparcl-tdep.c (sparclite_ops): Likewise.
179 Tue Jul 11 11:15:55 1995 Kung Hsu <kung@rtl.cygnus.com>
181 * solib.c: Add _DYNAMIC__MGC base symbol for Mentor Graphics Inc.
182 * solib.c (match_main): New function for checking name of main.
183 * solib.c (solib_add): Not to add if solib match main.
185 Fri Jul 7 14:41:56 1995 Kung Hsu <kung@rtl.cygnus.com>
187 * elfread.c (elf_symtab_read): Fix a bug ignoring compiler
188 generated internal labels ($LM...).
190 Wed Jul 5 11:38:36 1995 Kung Hsu <kung@rtl.cygnus.com>
192 * defs.h: if __GO32__ or WIN32 the directory separating symbol should
195 * remote-nindy (nindy_wait): Use infinite timeout reading after
198 Tue Jul 4 10:30:22 1995 Jeffrey A. Law <law@rtl.cygnus.com>
200 * infrun.c (wait_for_inferior): When switching from one thread to
201 another, save infrun's state for the old thread and load infrun's
202 previous state for the new thread.
203 * thread.c (struct thread_info): Add new fields for thread specific
204 state saved/restored in infrun.c.
205 (add_thread): Initialize new fields.
206 (load_infrun_state): New function.
207 (save_infrun_state): New function.
208 * thread.h (load_infrun_state): Provide external decl.
209 (save_infrun_state): Likewise.
211 * infrun.c (wait_for_inferior): When we hit a breakpoint for the
212 wrong thread, make sure to write the fixed PC value into the thread
213 that stopped. Restart all threads after single stepping over a
214 breakpoint for a different thread.
215 * breakpoint.c (set_momentary_breakpoint): Make momentary
216 breakpoints thread specific in a multi-threaded program.
217 * lynx-nat.c (child_resume): Add some comments. Correctly
218 choose between the single and multi-threaded step and continue
221 Fri Jun 30 16:15:36 1995 Stan Shebs <shebs@andros.cygnus.com>
223 * config/h8300/h8300.mt: Renamed from h8300hms.mt.
224 * config/h8500/h8500.mt: Renamed from h8500hms.mt.
225 * config/z8k/z8k.mt: Renamed from z8ksim.mt.
226 * configure, configure.in: Update to reflect renamings.
228 * remote-sim.c (sim): New command, passes commands to simulator.
229 (simulator_command): New function.
230 (gdbsim_ops): Clean up.
231 * remote-sim.h (sim_do_command): Declare.
232 * sh-tdep.c (memory_size): Remove command.
234 * Makefile.in (SIM, SIM_OBS): New variables.
235 (CLIBS, CDEPS): Add value of SIM.
236 (DEPFILES): Add value of SIM_OBS
238 * config/arm/arm.mt, config/h8300/h8300.mt, config/h8500/h8500.mt,
239 config/sh/sh.mt, config/sparc/sp64sim.mt, config/w65/w65.mt,
240 config/z8k/z8k.mt: Remove simulator files from TDEPFILES,
241 define in SIM_OBS and SIM.
242 config/sparc/sp64sim.mt (SIMFILES): Remove.
244 * remote-z8k.c: Remove, was superseded by remote-sim.c
245 * Makefile.in, mpw-make.in: Remove references to remote-z8k.c.
247 Sun Jun 25 15:30:43 1995 Stan Shebs <shebs@cygnus.com>
249 * remote.c (remote_read_bytes, remote_write_bytes): Second arg
250 should be char *, not unsigned char *.
251 * dcache.h (memxferfunc): Ditto.
252 * monitor.c (monitor_write_memory, monitor_read_memory_single):
254 (monitor_make_srec): Let compiler figure size of hextab.
256 Sat Jun 24 19:27:37 1995 Jeffrey A. Law <law@rtl.cygnus.com>
258 * lynx-nat.c (child_wait): Don't restart new threads and loop
259 to the top of child_wait; let the machine independent code in
260 wait_for_inferior deal with new thread notifications.
262 Fri Jun 23 11:51:58 1995 Kung Hsu <kung@mexican.cygnus.com>
264 * remote-nindy (nindy_load): Put in target specific load, it's
267 Thu Jun 22 20:21:59 1995 Stan Shebs <shebs@andros.cygnus.com>
269 * utils.c (error): Move local `args' outside conditional,
270 move local `string1' inside, declare function as void if
271 non-ANSI compiler, dereference error_hook when calling.
273 * mac-xdep.c (stdarg.h): Don't include.
275 Thu Jun 22 13:12:33 1995 Kung Hsu <kung@mexican.cygnus.com>
277 * remote-nindy.c (nindy_wait): Change timeout in SERIAL_READCHAR.
279 Wed Jun 21 13:24:41 1995 Jeff Law (law@snake.cs.utah.edu)
281 * hppam3-nat.c: Change HP800_THREAD_STATE to TRACE_FLAVOR and
282 HP800_THREAD_STATE_COUNT to TRACE_FLAVOR_SIZE.
284 Wed Jun 21 05:57:56 1995 Steve Chamberlain <sac@slash.cygnus.com>
286 * monitor.c: Turn on caching.
287 (monitor_printf): If a ^C was sent, don't expect to see its
289 (monitor_open): Enable caching.
290 (monitor_resume, monitor_load): Flush cache.
291 (monitor_xfer_memory): Call cache routine.
292 (monitor_dump_regs): New.
293 (monitor_fetch_registers): If monitor_dump_regs available
295 (monitor_load): Don't ref exec_bfd if it's NULL.
296 (monitor_load_srec): Use new monitor_make_srec calling convention.
297 (monitor_make_srec): Rewrite to cope with two, three and four byte
299 * remote-hms.c (hms_cmds): Initialze end-of-command delim.
300 * dcache.h, dcache.h: Rewritten.
301 * remote.c: Reenable caching.
302 (getpkt): Reduce MAX_TRIES to 3.
303 (remote_xfer_memory): Use dcache_xfer_memory.
304 * defs.h (error_hook): New.
305 * top.c (error_hook): New definition.
306 * utils.c (error): Use error_hook if initialized.
307 * sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
308 HAVE_SOCKETS in place of #ifndef GO32.
310 Tue Jun 20 22:17:44 1995 Jeff Law (law@snake.cs.utah.edu)
312 * config/pa/tm-hppa.h (PSW_*): Define processor status word masks.
313 (INSTRUCTION_NULLIFIED): Allow specific targets to override.
314 * config/pa/tm-hppao.h (INSTRUCTION_NULLIFIED): Define to work
315 around losing mach kernel behavior.
317 Tue Jun 20 12:03:36 1995 Stan Shebs <shebs@andros.cygnus.com>
319 * monitor.c (monitor_wait): Don't use the watchdog timeout
321 * w89k-rom.c (w89k_open): Define to be static.
324 Tue Jun 20 10:19:40 1995 Stu Grossman (grossman@cygnus.com)
326 * gdbtk.c: Add functions Tcl_Malloc, Tcl_Realloc, and Tcl_Free.
328 * gdbtk.tcl (add_breakpoint_frame): Add more fields.
329 * (create_file_win create_asm_win build_framework): Create null
330 bindings for meta keys to keep window from dropping down to
331 insertion point when meta is pressed by itself. New bindings:
332 Up/Down - Scroll up/down one line at a time
333 Next/Prior - Scroll up/down one page at a time
334 Home/End - Warp to current pc/end of file
335 * (build_framework): Turn on breakpoint menu.
336 * (create_command_window): Implement tab completion. Add binding
337 for ^C to stop target.
340 Sat Jun 17 10:17:16 1995 Jeff Law (law@snake.cs.utah.edu)
342 * somsolib.c (som_solib_add): Validate regexp argument.
343 Don't assume the first entry on dld's library list is the main
344 program. Don't load the same library more than once and don't
345 consider the main program a shared library.
346 (som_solib_sharedlibrary_command): New function
347 (_initialize_som_solib): Add "sharedlibrary" command.
349 Thu Jun 15 14:54:58 1995 Stan Shebs <shebs@andros.cygnus.com>
351 * array-rom.c: Remove, no longer used.
353 * remote-hms.c (hms_open): Make static.
355 * mpw-config.in (MacSerial.h): Copy from version in {CIncludes},
356 not {MPW}Interfaces:CIncludes.
357 * ser-mac.c (mac_baud_rate_table): Fix value for 38400 baud.
359 Wed Jun 14 14:27:07 1995 Per Bothner <bothner@kalessin.cygnus.com>
361 * ch-exp.y: Remove lots of unsupported productions and names.
362 Add support for IF-expressions, ORIF, ANDIF, NUM, and ADDR.
364 Tue Jun 13 21:40:11 1995 Per Bothner <bothner@kalessin.cygnus.com>
366 * parser-defs.h (enum precedence): Added PREC_BUILTIN_FUNCTION.
367 * expression.h (enum exp_opcode): Added UNOP_LOWER, UNOP_UPPER,
369 * expprint.c (dump_expression): Handle the new exp_opcodes.
370 (print_subexp): Handle PREC_BUILTIN_FUNCTION.
371 (print_simple_m2_func): Removed.
372 (print_subexp): Remove support for Modula2 builtin functions.
373 * m2-lang.c (m2_op_print_tab): Add support for builtin functions.
374 * ch-exp.y: Parse LOWER, UPPER, and LENGTH builtins.
375 (write_lower_upper_value): Convenience function for LOWER and UPPER.
376 (upper_lower_argument, length_argument): Removed non-terminals.
377 * ch-lang.c (chill_op_print_tab): Entries for UPPER, LOWER, LENGTH.
378 (type_lower_upper): New function. Calculate LOWER/UPPER of type.
379 (value_chill_length): New function. Calcalate LENGTH of ARRAY/STRING.
380 (evaluate_subexp_chill): Handle UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH.
382 Mon Jun 12 12:48:13 1995 Stan Shebs <shebs@andros.cygnus.com>
384 Windows support bits from Steve Chamberlain <sac@slash.cygnus.com>.
385 * defs.h: Don't declare strchr and friends if WIN32.
386 (DIRNAME_SEPARATOR): Move here from source.c.
387 (SLASH_P, SLASH_CHAR, SLASH_STRING, ROOTED_P): New macros,
388 symbolic definitions for filename bits.
389 * top.c (cd_command): Use these.
390 * source.c (mod_path, openp): Ditto.
391 * terminal.h: Disable termio/sgtty definitions if WIN32.
392 * findvar.c (registers_changed): Call registers_changed_hook
395 Mon Jun 12 12:22:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
397 * Makefile.in (distclean, realclean): Remove config.cache and
400 Mon Jun 12 00:21:59 1995 Jeff Law (law@snake.cs.utah.edu)
402 * somsolib.c: Include gdb-stabs.h.
403 (som_solib_section_offsets): Use SECT_OFF_XXX rather than 0, 1,
404 etc. Initialize offsets for RODATA & BSS too.
406 Sat Jun 10 17:59:11 1995 Jeff Law (law@snake.cs.utah.edu)
408 * hppa-tdep.c (frame_chain): Try to compensate for incomplete
409 register information in core files when backtracing.
411 Fri Jun 9 14:51:38 1995 Stu Grossman (grossman@cygnus.com)
413 * remote-nrom.c: Remove everything but download code. More
416 Thu Jun 8 15:06:00 1995 Stu Grossman (grossman@cygnus.com)
418 * defs.h maint.c monitor.c remote-mips.c remote.c: Add support
419 for `watchdog' variable. This allows the user to put an upper
420 limit on the amount of time that GDB will wait for the target to
421 return from a step or continue operation. This will primarily be
422 used for the testsuite, where it is difficult to come up with a
423 reasonable timeout for things like function calls, which can take
424 as long as three minutes under some circumstances. If the
425 watchdog timer expires, GDB will generate an error that looks like
426 `Watchdog has expired.', and will detach from the target.
428 * remote-mips.c (mips_open): Setup initial frame from target.
429 Print it out so that user is told where the program is stopped
432 * remote-nrom.c: Loads of cleanups. Use serial code to open
433 network connections. Use expect() to wait for response to
436 * ser-tcp.c (tcp_open): Retry connection if we get ECONNREFUSED.
438 * serial.c serial.h (serial_open serial_fdopen serial_close):
439 Allow users to open the same device multiple times. They all get
440 to share the same serial_t. This is about the only way to have
441 multiple active targets use the same device (for download and
444 * sparcl-tdep.c: Keep #include <unistd.h> away from GO32.
446 * target.c: Add `targetdebug' variable. If this is non-zero,
447 then a special target is put at the top of the target stack which
448 will cause all calls through the target vector to have their args
449 and results printed out.
451 Wed Jun 7 17:40:37 1995 Per Bothner <bothner@kalessin.cygnus.com>
453 * ch-exp.y: Handle <primitive_value> "->" <modename>.
455 Wed Jun 7 17:46:33 1995 Michael Meissner <meissner@tiktok.cygnus.com>
457 * mem-break.c (LITTLE_BREAKPOINT): If BREAKPOINT and
458 {LITTLE,BIG}_BREAKPOINT are all defined, don't redefine.
459 (BIG_BREAKPOINT): Ditto.
461 * config/rs6000/tm-rs6000.h (BREAKPOINT): Define as either
462 BIG_BREAKPOINT or LITTLE_BREAKPOINT depending on the target byte
465 Wed Jun 7 12:41:42 1995 Jeff Law (law@snake.cs.utah.edu)
467 * somsolib.c (som_solib_section_offsets): Handle relative pathnames.
469 * hppa-tdep.c (frame_saved_pc): Handle backtracing through signal
470 handler in dynamically linked executables.
472 Tue Jun 6 10:44:25 1995 Michael Meissner <meissner@tiktok.cygnus.com>
474 From Andrew Cagney <cagney@highland.com.au>
475 * rs6000-tdep.c (single_step): Handle both little and big endian
477 (gdb_print_insn_powerpc): Deal with disassembling both little and
478 big endian PowerPC systems.
479 (_initialize_rs6000_tdep): Use gdb_print_insn_powerpc to handle
480 disassembly, rather that assuming big endian order.
482 * config/rs6000/tm-rs6000.h (BREAKPOINT): Delete.
483 (BIG_BREAKPOINT): Define, big endian breakpoint instruction.
484 (LITTLE_BREAKPOINT): Define, little endian breakpoint instruction.
486 Sat Jun 3 01:54:56 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
488 * README: Add note about Unixware 2.x.
490 * dbxread.c (process_one_symbol): Check for exact symbol name
491 match when fixing up N_GSYM and N_STSYM symbols from Sun acc.
493 * valprint.c (value_print_array_elements): Use
494 fprintf_filtered to put out `<repeats %u times>',
495 from schwab@issan.informatik.uni-dortmund.de (Andreas Schwab).
497 * value.h (struct value): Change `repetitions' field from
498 `short' to `int' type.
501 Fri Jun 2 11:17:23 1995 Doug Evans <dje@canuck.cygnus.com>
503 * arc-tdep.c (arc_bfd_mach_type): New static global.
504 (codestream_fill): Handle byte order differences.
505 (setup_prologue_scan): Don't read stdarg function's "sub sp,sp,N".
506 (arc_get_frame_setup): Read it here.
507 (arc_frame_saved_pc): And here.
508 (arc_print_insn): New function.
509 (arc_set_cpu_type): Set arc_bfd_mach_type. Don't set tm_print_insn.
510 (_initialize_arc_tdep): Set tm_print_insn to arc_print_insn.
513 Wed May 31 12:04:01 1995 J.T. Conklin <jtc@rtl.cygnus.com>
515 * nlm/{configure.in, Makefile.in}: Converted to use autoconf.
516 * nlm/configure: New file, generated with autoconf 2.3.
518 * nlm/configure.in: Use sed instead of awk to get the value of
519 cpufile. Awk is not a utility required by the GNU coding
520 standards. This change also fixes the rigid whitespace
521 requirements that were required for awk.
523 * sparclite/aload.c: Use a file descriptor instead of a stdio
524 stream for i/o with target board.
525 Use #error if HAVE_TERMIOS is not defined.
527 * sparclite/{Makefile.in, configure.in}: Converted to use
529 * sparclite/configure: New file, generated with autoconf 2.3.
531 Sun May 28 23:10:07 1995 Jeff Law (law@snake.cs.utah.edu)
533 * defs.h: Include either varargs.h or stdarg.h (for va_list).
534 Fix stupid thinko in last change ("..." -> "va_list").
536 * defs.h (vprintf_filtered declaration): Add PARAMS prototype;
537 gcc-2.5 chokes on format attributes for unprototyped functions.
538 (vfprintf_filtered declaration): Likewise.
539 (vprintf_unfiltered declaration): Likewise.
540 (vfprintf_unfiltered). Likewise.
542 Sat May 27 23:54:17 1995 J.T. Conklin <jtc@rtl.cygnus.com>
544 * configure.in: Use sed instead of awk to get the values of
545 hostfile, targetfile and nativefile. Awk is not a utility
546 required by the GNU coding standards. This change also
547 fixes the rigid whitespace requirements that were required
549 * configure: regenerated.
551 Sat May 27 16:24:04 1995 Angela Marie Thomas <angela@cirdan.cygnus.com>
553 * sparclite/{Makefile,configure}.in: Add hooks for building with
554 -lsocket & -lnsl for solaris2. Don't build aload/eload for DOS.
556 Thu May 25 12:46:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
558 * gdbserver/remote-utils.c (prepare_resume_reply): Add FIXME
559 comment regarding signal numbering.
561 Wed May 24 15:49:47 1995 Steve Chamberlain <sac@slash.cygnus.com>
563 * arm-tdep.c (_initialize_arm_tdep): Use print_insn_little_arm
566 * arm-tdep.c (convert_from_extended, convert_to_extended):
568 * coffread.c (enter_linenos): Return if linetab 0.
569 * config/arm/arm.mt (TDEPFILES): Add simulator support.
570 * config/arm/tm-arm.h (FRAME_FIND_SAVED_REGS): Fix prototypes.
572 Mon May 22 19:37:21 1995 Rob Savoye <rob@darkstar.cygnus.com>
574 * config/idt.mt: replace monitor and array-rom with the new
577 Mon May 22 15:38:25 1995 Stu Grossman (grossman@cygnus.com)
579 * remote-nindy.c: Install Kung patch for PR 6820. I have no idea
582 * breakpoint.c: Move defaults of watchpoint related macros into
584 * target.h: Macros from breakpoint.c. Conditionalize based on
585 TARGET_HAS_HARDWARE_WATCHPOINTS.
586 * i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS
587 instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
589 * config/i386/nm-linux.h, config/mips/nm-irix4.h,
590 config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define
591 TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
593 Mon May 22 06:47:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
595 * breakpoint.c, target.h: Move defaults of watchpoint related
596 macros back to breakpoint.c. Required to get GDB compiling
599 Fri May 19 14:49:37 1995 J.T. Conklin <jtc@rtl.cygnus.com>
601 * defs.h (ATTR_FORMAT): New macro, expands to gcc's format
602 attribute when compiled by gcc.
603 * defs.h, language.h, monitor.h: Changed many function
604 declarations to use ATTR_FORMAT.
606 * breakpoint.c (delete_command); source.c (directory_command);
607 top.c (define_command): Changed call to query() that had too
609 * printcmd.c (address_info): Changed call to printf_filtered()
610 that had too many arguments.
612 Fri May 19 09:52:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
614 * infrun.c (wait_for_inferior): Move assignments to stop_signal
615 and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they
616 were--after the switch statement on w.kind. You can't read the
617 registers of an inferior which has exited. Use a goto in the
618 STOPPED_BY_WATCHPOINT code.
619 * infrun.c (wait_for_inferior): Reinstate
620 HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code.
622 Fri May 19 06:15:40 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
624 * utils.c, complaints.c, language.c, monitor.c, remote-array.c,
625 remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of
626 stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it
627 must match the definition of PARAMS.
632 Thu May 18 15:58:46 1995 J.T. Conklin <jtc@rtl.cygnus.com>
634 * utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered,
635 printf_filtered, printf_unfiltered, printfi_filtered, query, warning,
636 error, fatal, fatal_dump_core): Use stdarg.h macros when compiling
637 with an ANSI compiler.
638 * complaints.c (complain): Likewise.
639 * language.c (type_error, range_error): Likewise.
640 * monitor.c (monitor_printf, monitor_printf_noecho): Likewise.
641 * remote-array.c (printf_monitor, debuglogs): Likewise.
642 * remote-mips.c (mips_error): Likewise.
643 * remote-os9k.c (printf_monitor): Likewise.
644 * remote-st.c (printf_stdebug): Likewise.
646 * gdbtk.c (gdbtk_query): Likewise.
649 * defs.h, complaints.h, language.h, monitor.h: Add prototypes to
652 * printcmd.c: Remove uneeded #include <varargs.h>.
653 * remote-e7000.c: Likewise.
655 * f-typeprint.c (f_type_print_base): Fix typo found by above
658 Wed May 17 11:21:32 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
660 * Makefile.in (xcoffread.o): Depend on partial-stab.h.
662 * xcoffsolib.c (sharedlibrary_command): New command.
663 * xcoffsolib.c (solib_info): Call xcoff_relocate_symtab.
664 * xcoffsolib.c: Miscellaneous cleanups.
666 * partial-stab.h: Ignore symbol descriptor '-' (for local
667 variables with negative type numbers) without complaint.
669 * rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own
670 local emulation thereof. Remove unused variable ostart.
672 Wed May 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
674 * Makefile.in (config.status): changed target so that
675 config.status --recheck is executed if configure script changes.
677 * monitor.c (monitor_printf): Changed format specification in
678 error message to work with pre-ansi compilers.
679 (monitor_load_srec): reduced length of s-records from 128 to 32
680 bytes so download is more reliable with the rom68k monitor.
682 * rom68k-rom.c: Added trailing space to prompt string.
684 * config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
685 * config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
687 * defs.h, config/{xm-lynx.h, xm-nbsd.h},
688 config/i386/{xm-i386bsd.h, xm-linux.h},
689 config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
690 config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
691 (PSIGNAL_IN_SIGNAL_H): Removed.
693 Tue May 16 13:16:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
695 * Makefile.in (Makefile): Added config.status to dependency list.
697 * configure.in: Added INIT-CMDS argument to AC_OUTPUT which sets
698 gdb_host_cpu, gdb_target_cpu and nativefile.
699 * configure: regenerated.
701 Mon May 15 23:50:51 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
703 * mdebugread.c (parse_symbol): Do not relocate stBlock/scText
704 symbols, their value is the displacement from the procedure address.
705 * top.c (init_main): Add missing newlines to help strings for
706 `if' and `while' commands, fix help string for `show commands'.
708 Mon May 15 18:37:56 1995 Stu Grossman (grossman@cygnus.com)
710 * breakpoint.c: Move defaults of watchpoint related macros into
711 target.h. Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of
713 * infrun.c (wait_for_inferior): Enhance comment near
714 STOPPED_BY_WATCHPOINT.
715 * target.h: Macros from breakpoint.c.
717 Mon May 15 17:11:38 1995 J.T. Conklin <jtc@rtl.cygnus.com>
719 * config/i386/{i386sol2.mh, i386v4.mh, ncr3000.mh},
720 config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
721 mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
723 * config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
725 * Makefile.in, configure.in: Converted to use autoconf
726 * aclocal.m4: New file, local autoconf macro definitions.
727 * configure: New file, generated with autoconf 2.3.
729 Mon May 15 14:46:41 1995 Stan Shebs <shebs@andros.cygnus.com>
731 * remote.c (remote_kill): Add prototype.
732 * cpu32bug-rom.c (cpu32bug_open): Properly define as static.
733 * config/h8300/h8300hms.mt (TDEPFILES): Add monitor.o.
735 Mon May 15 12:12:34 1995 Stu Grossman (grossman@cygnus.com)
737 * sparclite/salib.c (win_ovf win_unf): Make window size constant
738 into a variable (__WINSIZE) so that it can be controlled via the
740 * sparclite/sparclite.h: Add SL933 #ifdef to set __WINSIZE to 6
743 * infrun.c: Add #ifdef HP_OS_BUG to all references to
744 trap_expected_after_continue.
745 * (wait_for_inferior): Fix for remote watchpoints. Don't try to
746 insert breakpoints while target is running (this only works on
747 *some* native targets). This may also speed up native watchpoints
750 Sat May 13 13:55:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
752 * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
753 mdebugread.c (struct symloc), hpread.c (struct symloc),
754 xcoffread.c (struct symloc): Fix inaccurate comment introduced
757 Sat May 13 13:34:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
759 * rs6000-tdep.c (find_toc_address): Revise comment.
760 * symfile.c, symfile.h (init_psymbol_list): New function;
761 consolidate duplicated copies from os9kread.c, dbxread.c
763 * defs.h: Declare info_verbose.
764 * xcoffread.c: Extensive changes to support psymtabs.
766 Fri May 12 13:48:41 1995 Stu Grossman (grossman@andros.cygnus.com)
768 * cpu32bug-rom.c remote-est.c rom68k-rom.c: Update line_term element.
770 Fri May 12 06:39:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
772 * partial-stab.h: Expand comments.
774 Thu May 11 19:01:37 1995 Jeff Law (law@snake.cs.utah.edu)
776 * Support debugging using native MACH primitives on hppa*-*-osf*.
777 * configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore.
778 * config/pa/hppaosf.mh: New file.
779 * config/pa/nm-hppao.h: Likewise.
780 * hppam3-nat.c: Likewise.
781 * config/pa/tm-hppao.h (PSW_SS): Define for single-stepping.
782 (MACHINE_CPROC_*_OFFSET): Define.
784 (START_INFERIOR_TRAPS_EXPECTED): Delete definition.
786 Wed May 10 18:59:26 1995 Stu Grossman (grossman@andros.cygnus.com)
788 * hppa-tdep.c (read_unwind_info): Cosmetic cleanup.
789 * (unwind_command): Clean it up and make it print things out
791 * monitor.c: Add ^C handling capability (mostly ripped off from
793 * (monitor_printf): Make it check the command echo.
794 * (monitor_printf_noecho): Similar to above, but doesn't check
796 * (monitor_stop): No longer waits for prompt. That is the job of
797 the caller. This makes things work much better for monitor_wait,
798 which waits for the prompt itself.
799 * (monitor_open): Deal with new monitor_stop semantics. Also,
800 flush input after sending init strings to get rid of junk that may
801 be output. Also, don't always send \r to remote. Use
802 monitor_ops->line_term cuz proper character isn't always \r.
803 * (monitor_fetch_register): Switch to completely different
804 algorithm to deal with lame-ass monitors which put spaces in the
805 middle of numbers, and prompt with a space!!!!!
806 * (monitor_read_memory_single): New routine to be used with
807 monitors that can only return one byte/short/long at a time. This
808 is selected via MO_GETMEM_READ_SINGLE.
809 * (monitor_load_srec): Use monitor_printf_noecho for sending S
810 records. Most targets don't echo them.
811 * (monitor.h): Get rid of cmd_delim. Add line_delim.
812 * op50n-rom.c (op50n_cmds): Fill it up. Make it work.
813 * w89k-rom.c: Change all eols from \r to \n. Change load_resp to
814 ^Q to prevent error message.
815 * config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special
816 instruction sequence at end to make restore_pc_queue happy.
818 Wed May 10 15:59:00 1995 Torbjorn Granlund <tege@adder.cygnus.com>
820 * remote-est.c (est_open): Make static to match prototype.
822 Tue May 9 16:58:50 1995 Michael Meissner <meissner@tiktok.cygnus.com>
824 * configure.in: Add little endian PowerPC support.
825 * config/powerpc/ppcle-eabi.mt: New file for little endian PowerPC
827 * config/powerpc/tm-ppcle-eabi.h: ditto.
829 Mon May 8 12:11:38 1995 J.T. Conklin <jtc@rtl.cygnus.com>
831 * nlm/configure.in (gdb_host, gdb_host_cpu, gdb_target): Removed.
832 These variables not used.
834 * config/m68k/monitor.mt (TDEPFILES): Added cpu32bug-rom.o.
836 Wed May 3 17:54:47 1995 Stan Shebs <shebs@andros.cygnus.com>
838 * monitor.c (monitor_command): Don't use PROMPT until monitor
839 target is known to be open.
840 (monitor_make_srec): Don't define size of hextab.
842 Tue May 2 18:32:24 1995 Stan Shebs <shebs@andros.cygnus.com>
844 * configure.in (--enable-netrom): New configuration option.
845 * Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append
847 (NETROM_OBS): New variable.
848 * remote-nrom.c: New file, NetROM target support.
849 * config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use
850 REMOTE_OBS instead of REMOTE_O.
852 * config/arc/arc.mt: Ditto.
855 Fri Apr 28 23:30:00 1995 Stu Grossman (grossman@cygnus.com)
857 * array-rom.c (_initialize_array array_open): Move baud_rate
858 initialization from _initxxx to array_open to fix bug with
859 overriding -b command line option.
861 Thu Apr 27 20:29:34 1995 Doug Evans <dje@canuck.cygnus.com>
863 * Makefile.in (RUNTEST): Fix reference of `srcdir'.
865 Wed Apr 26 19:01:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
867 * remote-hms.c: Rewrite to use new monitor conventions.
869 Tue Apr 25 11:27:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
871 * dbxread.c: Add comment explaining lowest_text_address.
872 Add comment regarding stringtab_global and psymtabs.
874 Sat Apr 22 01:26:29 1995 Jeff Law (law@snake.cs.utah.edu)
876 * config/pa/tm-hppa.h (EXTRACT_STRUCT_VALUE_ADDRESS): Fix.
878 * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Rewrite to correctly
879 handle "short", "int" and small structures returned in registers.
881 Fri Apr 21 12:57:53 1995 Kung Hsu <kung@mexican.cygnus.com>
883 * minsyms.c: add new function lookup_minimal_symbol_text, to look
884 for text symbol only.
885 * breakpoint.c (create_longjmp_breakpoint): call
886 lookup_minimal_symbol_text instead of lookup_minimal_symbol.
887 * symtab.h: add lookup_minimal_symbol_text prototype.
889 Fri Apr 21 12:03:44 1995 Stan Shebs <shebs@andros.cygnus.com>
891 * sh-tdep.c (sh-opc.h): Don't include.
892 (gdbcore.h): Include.
893 (frame_find_saved_regs): Remove unused local.
895 Thu Apr 20 10:12:21 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
897 * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
898 mdebugread.c (struct symloc), hpread.c (struct symloc): Clean
901 Wed Apr 19 16:58:11 1995 Stu Grossman (grossman@andros.cygnus.com)
903 * hppa-tdep.c (deposit_17): New routine to deposit 17 bit
904 constants into PA instructions.
905 * Put #ifdefs around all signal handling code. Not generally
906 needed for embedded boards.
907 * (hppa_fix_call_dummy): Parameterize offsets into call dummy to
908 allow different dummys to be used by this code. Use
909 INSTRUCTION_SIZE instead of REGISTER_SIZE for things.
910 Conditionalize setup of _sr4export fixup. Improve comments.
911 * config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different
912 call dummy if PA_LEVEL_0 is defined. Better comments for call
913 dummys. Define offsets for LDIL/LDO instructions which load
915 * config/pa/tm-pro.h: Get rid of signal handling stuff. Define
916 PA_LEVEL_0 to disable mucking with space regs and such.
918 Mon Apr 17 15:37:08 1995 Stu Grossman (grossman@andros.cygnus.com)
920 * cpu32bug-rom.c monitor.h op50-rom.c remote-est.c rom68k-rom.c
921 w89k-rom.c: Remove loadtypes, loadprotos and baudrates.
922 * op50-rom.c: Fix copyrights and add load routine to op50n_cmds.
923 * rom68k-rom.c (_initialize_rom68k): Don't set baud rate.
924 * w89k-rom.c: Fix copyrights.
926 Sun Apr 16 14:00:55 1995 Stu Grossman (grossman@andros.cygnus.com)
928 * monitor.c: Move all xmodem stuff into xmodem.[ch]. Remove
929 unnecessary remoteloadprotocol and remoteloadtype support.
930 * (expect expect_prompt): Change names to monitor_expect and
931 monitor_expect_prompt. Make them global.
932 * (printf_monitor): Change name to monitor_printf. Make global.
933 * (monitor_read_memory): Flush command echo to avoid parsing
934 ambiguity with CPU32Bug monitor.
935 * (monitor_load): Remove remoteloadprotocol and remoteloadtype
936 support. Call target_ops->load_routine, default to
938 * (monitor_load_srec): Remove everything but S-record support.
939 * monitor.h (monitor_ops): Add load_routine to provide monitor
940 specific download capability.
941 * remote-est.c: Clean up copyrights and comments.
942 * w89k-rom.c: Use new xmodem support.
943 * xmodem.c xmodem.h: New files to support xmodem downloads.
944 * rom68k-rom.c remote-est.c: Fix copyrights, add load_routine
945 entry to monitor_ops.
946 * cpu32bug-rom.c: New file to support Moto BCC debuggers.
947 * config/m68k/est.mt (TDEPFILES): Add cpu32bug.o.
948 * config/pa/hppapro.mt (TDEPFILES): Add xmodem.o.
950 Sat Apr 15 18:00:15 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
952 * rem-multi.shar: Removed; superceded by gdbserver.
954 Fri Apr 14 12:10:24 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
956 * xcoffread.c (xcoff_sym_fns): Revise comment about merging this
959 * breakpoint.c (fixup_breakpoints): Removed.
960 * rs6000-nat.c (vmap_symtab): Don't call fixup_breakpoints.
961 (vmap_ldinfo, xcoff_relocate_core): Call breakpoint_re_set.
963 * coffread.c (coff_symfile_offsets): Allocate SECT_OFF_MAX
964 sections, not just SECT_OFF_MAX-1.
966 * rs6000-nat.c (vmap_symtab), xcoffread.c: Re-do section offsets
967 to be indexed by SECT_OFF_* instead of xcoff section numbers.
968 * objfiles.c, remote.c: Remove comments regarding SECT_OFF_*.
969 * symtab.h: Revise comment about block_line_section.
970 * rs6000-nat.c (vmap_symtab): Don't relocate objfile->sections.
972 Sat Apr 15 14:15:14 1995 Stan Shebs <shebs@andros.cygnus.com>
974 * mpw-make.in (init.c): Don't try to do symbolic {o} in sed
975 command, not allowed by some version of MPW Make.
976 * ser-mac.c (mac-setbaudrate): Make it actually set baud rates.
978 Sat Apr 15 14:05:09 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
980 * alpha-tdep.c (alpha_push_arguments): Fix typo (TYPE_VALUE ->
981 VALUE_TYPE). Do the cast for TYPE_CODE_BOOL, TYPE_CODE_CHAR,
982 TYPE_CODE_ENUM, and TYPE_CODE_RANGE as well as TYPE_CODE_INT.
984 Sat Apr 15 14:04:32 1995 Per Bothner <bothner@cygnus.com>
986 * alpha-tdep.c (alpha_push_arguments): Only cast to long for
990 Sat Apr 15 13:52:24 1995 Stan Shebs <shebs@andros.cygnus.com>
992 * gdbtk.c (gdb_disassemble): Read from inferior if connected
995 Fri Apr 14 10:18:20 1995 Stu Grossman (grossman@cygnus.com)
997 * README.GDBTK: New file. Contains the obvious.
1000 Thu Apr 13 16:17:04 1995 Rob Savoye <rob@darkstar.cygnus.com>
1002 * remote-array.c: New file for Array Tech LSI33k based controller
1005 Thu Apr 13 12:23:31 1995 Kung Hsu <kung@rtl.cygnus.com>
1007 * a29k-tdep.c (get_longjmp_target): Replace SWAP_TARGET_AND_HOST with
1009 * remote-vxsparc.c: New file, preliminary check in, this configuration
1011 * remote-vxmips.c: ditto.
1013 Thu Apr 13 12:10:14 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1015 * rs6000-tdep.c (xcoff_add_toc_to_loadinfo): Don't use a prototype
1016 to declare the function.
1018 Wed Apr 12 16:40:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1020 * monitor.h (init_monitor_ops): Declare.
1021 * rom68k-rom.c: Clarify some comments.
1022 (rom68k_open): Define as static, to match decl.
1024 Wed Apr 12 16:36:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1026 * gdb.gdb: New file.
1027 * .gdbinit: Move list-objfiles to gdb.gdb.
1029 * values.c (set_internalvar): Set modifiable flag of newval.
1031 Wed Apr 12 14:34:31 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1033 * xcoffread.c: Call complain() rather than error() or printing a
1037 Wed Apr 12 08:15:27 1995 Doug Evans <dje@canuck.cygnus.com>
1039 * arc-tdep.c: #include "gdbcmd.h".
1040 (codestream_seek): Pass CORE_ADDR.
1041 (arc_cpu_type, tmp_arc_cpu_type, arc_cpu_type_table): New globals.
1042 (debug_pipeline_p): Likewise.
1043 (X_...): Instruction field access macros.
1044 (BUILD_INSN): Define.
1045 (codestream_tell): Allow for stream elements > 1 byte.
1046 (codestream_fill): Likewise.
1047 (setup_prologue_scan): New function.
1048 (arc_get_frame_setup): Call it. Update to current spec
1049 regarding prologues. Use BUILD_INSN.
1050 (skip_prologue): New argument `frameless_p'. Use BUILD_INSN.
1051 (arc_frame_saved_pc): New function.
1052 (frame_find_saved_regs): Use BUILD_INSN.
1053 (get_insn_type, single_step): New functions.
1054 (one_stepped): New global.
1055 (arc_set_cpu_type_command, arc_show_cpu_type_command): New functions.
1056 (arc_set_cpu_type): New function.
1057 (_initialize_arc_tdep): Define new `set' commands `cpu',
1058 `displaypipeline', and `debugpipeline'.
1059 * remote-arc.c (break_insn): Add bi-endian support.
1060 (arc_insert_breakpoint): Likewise.
1061 (arc_remove_breakpoint): Likewise.
1062 (switch_command): Delete.
1063 * arc/tm-arc.h (TARGET_BYTE_ORDER): Delete.
1064 (TARGET_BYTE_ORDER_SELECTABLE): Define.
1065 (DEFAULT_ARC_CPU_TYPE): Define.
1066 (SKIP_PROLOGUE_FRAMELESS_P): Define.
1067 (BREAKPOINT): Delete.
1068 (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Define.
1069 (DECR_PC_AFTER_BREAK): Change to 8.
1070 (NO_SINGLE_STEP): Define.
1071 (ARC_PC_TO_REAL_ADDRESS): Define.
1072 (SAVED_PC_AFTER_CALL): Use it.
1073 (NUM_REGS, REGISTER_BYTES): Fix.
1074 (FRAME_SAVED_PC): Call arc_frame_saved_pc.
1075 (FRAME_LOCALS_ADDRESS): Fix.
1078 Tue Apr 11 16:42:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1080 * top.c, utils.c, defs.h: Remove error_hook. It is currently
1081 unused and would need to hook into error_begin()/return_to_top_level(),
1082 instead of error(), if it were to be used.
1084 Tue Apr 11 13:46:25 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1086 * utils.c, defs.h (warning_begin): Renamed from warning_setup, for
1087 consistency with error_begin. Also print warning_pre_print.
1089 * utils.c (warning): Use it.
1090 * utils.c (error_begin): Doc fix.
1091 * rs6000-nat.c (vmap_ldinfo): If we don't find ldinfo for the
1092 symfile_objfile, nuke it.
1094 Tue Apr 11 09:35:20 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1096 * printcmd.c (print_address_numeric): Pass use_local to
1097 print_longest, rather than always passing 1.
1099 * nlm/Makefile.in: Remove comments discussing munch.
1101 start-sanitize-gdbtk
1102 Tue Apr 11 11:07:12 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1104 * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, but
1105 F_SETOWN is, use that.
1108 Mon Apr 10 18:31:57 1995 Stan Shebs <shebs@andros.cygnus.com>
1110 Merge in support for Mac MPW as a host.
1111 (Old change descriptions retained for informational value.)
1113 * mpw-config.in (i386-unknown-go32): Change from aout.
1114 (sh-hitachi-hms): New target.
1115 * mpw-make.in (BISON): Use byacc instead of bison.
1116 (VERSION): Bump to 4.14.1.
1117 (*-pinsn.*): Remove mentions everywhere.
1118 (all): Don't build MacGDB.
1119 (gdb, SiowGDB): Depend on Version.r.
1120 (Version.r): Generate from version info.
1121 * main.c (main): Pass program name to START_PROGRESS, END_PROGRESS.
1122 (main) [MPW]: Remove debugging hook.
1123 * mac-xdep.c (debug_openp): New flag.
1124 (mac_init): Set flag if env variable defined.
1125 * ser-mac.c (mac_open): Clarify error message.
1126 (mac_readchar): Call PROGRESS while looping.
1127 (mac_write): Call sleep instead of sec_sleep.
1128 (sec_sleep): Remove.
1129 * source.c (openp) [MPW]: Only print debugging info if debugging.
1130 * utils.c (query) [MPW]: Clarify that behavior is a bug.
1132 * mpw-make.in (init.c): Use open-brace instead of mpw-open-brace.
1134 * main.c, source.c: Remove hacks that replace long strings
1135 with shorter ones, now solved portably.
1137 * config/m68k/xm-mpw.h (spin.h): Include.
1138 (ALMOST_STDC): Only define if MPW_C.
1139 * config/m68k/tm-mac.h: New file, Mac target definitions.
1141 * mpw-config.in (m68k-apple-macos, ppc-apple-macos,
1142 i386-unknown-aout): New targets.
1143 (mk.tmp): Add *DEPFILES definitions.
1144 * mpw-make.in: Remove gC rules, clean up definitions for other
1145 include files, bump version, fix bogus \ that should be \Option-d.
1146 (init.c): Build correctly.
1148 * mpw-make.in (HFILES_NO_SRCDIR): Add somsolib.h
1149 (ALLDEPFILES): Add somsolib.c.
1150 (somsolib.o): Add some dependencies.
1152 * mpw-config.in: Use nm-empty.h if host is not target.
1153 (xdepfiles): Add mac-xdep.c.o.
1155 * mpw-make.in: Add Fortran files.
1156 (XDEPFILES): Remove.
1158 * mpw-config.in (MacSerial.h): Duplicate from standard Serial.h.
1159 * ser-mac.c (MacSerial.h): Include instead of Serial.h.
1161 * mpw-make.in: Use {s} instead of {srcdir} everywhere.
1162 (bindir, libdir): Remove extra colon.
1163 (source.c): Compile with C instead of gC.
1164 (c-exp.tab.c, ch-exp.tab.c, m2-exp.tab.c): Add {o}.
1165 (install-only): Don't install MacGDB.
1166 * source.c (openp) [MPW]: Add a debugging display.
1167 (open_source_file) [MPW]: Use MPW basename finders.
1168 [MPW_C]: Briefer versions of help for line and list commands.
1170 * mpw-make.in: Change references from paread.c to somread.c
1172 * mpw-make.in (VERSION): Update to 4.12.3.
1173 (SiowGDB): New target, GDB using SIOW library.
1174 (init-new.c): New target, attempt to generate init.c from sources.
1175 (main.c.o, top.c.o): Put each in its own segment.
1176 * main.c (main) [MPW]: Always call mac_init.
1177 * utils.c (query) [MPW]: Always return "yes" if in MacGDB, output
1178 an extra newline otherwise.
1179 * mac-xdep.c: More comments in various places, remove junk.
1180 (mac_init): Add tests for MPW and SIOW.
1181 (use_wne, has_color_qd): Renamed.
1182 (use_color_qd): New variable.
1183 (grow_window): Only do console resizing to console window,
1184 call resize_console_window.
1185 (zoom_window): Call resize_console_window.
1186 (resize_console_window, scroll_text): New functions.
1187 (adjust_console_sizes): Always align viewrect to even multiples of
1189 (adjust_console_text): Always scroll by whole lines.
1190 (hacked_vfprintf, hacked_puts, hacked_fputc, hacked_putc): Force a
1191 recalculation of scroll positions if a newline was output.
1192 (hacked_fflush): Similarly, for flushing.
1193 (hacked_fgetc): New function, aborts if called in MacGDB.
1194 * ser-mac.c (mac_readchar): Rename starttime to start_time,
1195 remove debugging printf.
1196 (mac_write): Sleep on first 4 writes.
1197 (sec_sleep): New function, works like standard sleep.
1198 * macgdb.r: Adjust positioning and contents of About box.
1199 Set minimum size to 2000K, preferred size to 5000K.
1200 * config/m68k/xm-mpw.h (fgetc): Define as a macro.
1202 * mpw-make.in (.c.o, .gc.o): Prefix segment names with gdb_.
1203 (top.c.o, annotate.c.o): Add build rules.
1204 * macgdb.r (SysTypes.r): Include.
1205 ('vers'): New resource, version info.
1206 (mFile, mEdit, mDebug): Enable all menu items.
1207 (mDebug): Add key equivalents for continue, step, next.
1208 (wConsole): Add zoom and close boxes to window.
1209 * mac-xdep.c (new_console_window): New function, code taken from
1211 (mac_command_loop): Use GetCaretTime for wait interval, call
1212 do_idle on null events.
1213 (do_idle): New function.
1214 (zoom_window): Implement zooming.
1215 (v_scroll_proc): New function, handles vertical scrolling.
1216 (activate_window): Do activation of console window.
1217 (do_menu_command): Implement items of file, edit, and debug menus.
1218 (do_keyboard_command): Fix command extraction.
1219 (adjust_console_sizes, adjust_console_text): New functions.
1220 (hacked_fprintf, hacked_vfprintf, hacked_fputs, hacked_fputc,
1221 hacked_putc): Don't call draw_console.
1222 * ser-mac.c (mac_open): Add an error message for invalid ports.
1223 (first_mac_write): New global.
1224 (mac_write): Use first_mac_write to sleep on first several writes.
1226 * mpw-make.in (INCLUDE_CFLAGS): Add readline source dir.
1227 (READLINE_CFLAGS, READLINE_SRC, READLINE_DIR): Uncomment.
1228 (TSOBS): Don't compile inflow.c.
1229 (all, install): Add MacGDB.
1230 * main.c (main): Do Mac-specific init and command loop if a
1231 standalone app, skip full option help message if compiling
1233 (gdb_readline): If MPW, add a newline after the (gdb) prompt.
1234 * utils.c (_initialize_utils): If MPW, don't try to use termcap to
1235 compute the window size.
1236 * config/m68k/xm-mpw.h (printf, fprintf, fputs, fputc, putc,
1237 fflush): Define as macros that expand into hacked_... versions.
1238 (StandAlone, mac_app): Declare.
1239 * macgdb.r (SIZE): Set the default partition to 4000K.
1240 * mac-xdep.c (readline.h, history.h): Include.
1241 (terminal.h): Don't include.
1243 (gdb_has_a_terminal): Define Mac-specific version.
1244 (do_keyboard_command): Simplify search for command string.
1245 (readline): Define as gdb_readline.
1246 Add other history/readline stubs to make main gdb link.
1247 (hacked_fprintf, hacked_printf, hacked_vfprintf, hacked_fputs,
1248 hacked_fputc, hacked_fflush): New functions, intercept output to
1249 stdout and stderr, send to console window.
1251 * mpw-make.in (MacGDB): New target, standalone Mac-hosted gdb.
1252 (XDEPFILES): Define.
1253 (main.c.o): Compile with gC instead of C.
1254 * mac-defs.h: New file, menu etc definitions shared between
1256 * macgdb.r: New file, Rez (resource compiler) resource
1258 * mac-xdep.c: New file, Mac host interface code.
1259 * config/m68k/xm-mpw.h (PATHNAME_SEPARATOR): Rename to
1261 (PATHNAME_SEPARATOR_STRING): Remove.
1262 (SIGQUIT, SIGHUP): Define.
1263 (fileno, R_OK): Define.
1265 * mpw-config.in: New file, MPW configuration fragment.
1266 * mpw-make.in: New file, MPW makefile fragment.
1267 * config/m68k/xm-mpw.h: New file, MPW host definitions.
1268 * ser-mac.c: New file, Mac serial interface.
1270 Mon Apr 10 16:47:57 1995 Kung Hsu <kung@mexican.cygnus.com>
1272 * valprint.c (print_longest): Fix a syntax error in #ifdef
1273 PRINTF_HAS_LONG_LONG.
1275 * config/mips/xm-irix5.h: turn on CC_HAS_LONG_LONG and
1276 PRINTF_HAS_LONG_LONG.
1277 * config/mips/tm-irix5.h: turn on FORCE_LONG_LONG.
1279 Sat Apr 8 02:47:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1281 * mdebugread.c (parse_symbol): Use new variable
1282 nodebug_var_symbol_type as type of variables which don't have any
1283 ecoff debug info associated with them.
1284 (parse_symbol, parse_procedure): Use heuristics to determine if
1285 functions were compiled without debugging info and change their
1286 type to nodebug_function_symbol_type.
1287 (_initialize_mdebugread): Initialize nodebug_*_symbol_type.
1289 * source.c (line_info): Clear sal.pc for `info line' without
1292 Fri Apr 7 17:43:01 1995 Stu Grossman (grossman@andros.cygnus.com)
1294 * monitor.c: make_xmodem_packet and print_xmodem_packet go away.
1295 send_xmodem_packet shows up to do the obvious. Lots of fixes to
1296 xmodem downloads including resetting of block number at start of
1297 new transfers, fix for buffer overrun problem, addition of CRC
1299 * (monitor_open): loadtype_str and loadproto_str now default to
1300 first entry in monitor_ops->loadtypes.
1301 * (monitor_wait): Lengthen register dump buf, because of verbose
1303 * (monitor_fetch_register): Report unimplemented registers as 0.
1304 * (monitor_read_memory): Only do 16 byte aligned transfers
1305 because of formatting weirdness with the Winbond monitor. Also,
1306 ignore non-hex, non-whitespace formatting between bytes (same
1308 * (monitor_load): Clean up logic.
1309 * (monitor_load_srec): Re-do xmodem support. Move lots of it
1310 into send_xmodem_packet.
1311 * (getacknak): Get rid of polls and timeouts. Handle CRC
1312 requests from receiver.
1313 * (monitor_make_srec): Efficiency improvements. Don't call
1314 sprintf to output two digit hex numbers.
1315 * (crcinit, docrc): New, CRC-16 support routines.
1316 * (send_xmodem_packet): New routine to generate either CRC-16 or
1317 checksummed xmodem packets.
1319 * remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes):
1320 Reduce tables down to only the load types supported by each
1323 * w89k-rom.c (w89k_supply_register): Parses output of Winbond
1325 * (w89k_loadtypes, w89k_loadprotos): Reduce to just srec/xmodem.
1326 * (w89k_cmds): Add clear all breakpoints, memory fill, and dump
1329 * config/pa/tm-hppa.h: Define lots register offsets needed by
1333 Thu Apr 6 17:00:46 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1335 * Makefile.in (X11_INCLUDES): Define as empty.
1336 (X11_CFLAGS): Define as including $(X11_INCLUDES).
1337 (X11_LIB_SWITCHES): Define as empty.
1338 (X11_LIBS): Define as -lX11.
1340 start-sanitize-gdbtk
1341 * configure.in (enable_gdbtk): If gdbtk, support the --x-includes
1342 and --x-libraries switches, setting the X11_INCLUDES and
1343 X11_LIB_SWITCHES respectively. Instead of using a hardcoded -lX11
1344 in ENABLE_CLIBS, use the X11_LIB_SWITCHES and X11_LIBS variables.
1346 * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, don't use
1347 it. This means that the stop button doesn't work, but is better
1351 Wed Apr 5 19:57:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1353 * mips-tdep.c (mips_print_register): Remove unused variable
1354 our_type and call to init_type. Fixes memory leak. Reindent function.
1356 * mips-tdep.c (mips_print_register), findvar.c
1357 (write_register_bytes): Make buffer char[] instead of unsigned
1360 Mon Apr 3 19:28:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1362 * top.c, utils.c, main.c, defs.h: Replace error_pre_print with two
1363 variables: error_pre_print (for RETURN_ERROR) and quit_pre_print
1364 (for RETURN_QUIT). Fixes a bug whereby typing ^C (e.g. in "maint
1365 print sym") could output extraneous stuff.
1366 * objfiles.c: Don't declare error_pre_print; defs.h does it.
1368 Mon Apr 3 13:48:28 1995 Stu Grossman (grossman@andros.cygnus.com)
1370 * monitor.h: Add MO_GETMEM_NEEDS_RANGE flag.
1371 * monitor.c (monitor_read_memory): Use previously mentioned flag
1372 to send proper format memory examine commands to the w89k monitor.
1373 Also, try to handle bizarre format of memory dump...
1375 * op50-rom.c w89k-rom.c: Update to new monitor.[ch] conventions.
1377 Sat Apr 1 03:22:20 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1379 * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
1380 Handle relocated symbol address.
1381 * partial-stab.h, case N_SO, SOFUN_ADDRESS_MAYBE_MISSING:
1382 Do not relocate a zero address.
1384 Thu Mar 30 19:46:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1386 * config/a29k/tm-a29k.h: Nuke obsolete define CONTROL_END_ADDR; it
1389 * stabsread.c (read_range_type): Remove FIXME comment about
1390 type-id (I presume this meant a number followed by = followed by a
1391 type) versus type number; Per fixed it.
1393 Wed Mar 29 09:56:04 1995 Jason Molenda (crash@phydeaux.cygnus.com)
1395 * configure.in: sparc-*-sunos5* is same as sparc-*-solaris2*.
1397 Wed Mar 29 18:30:03 1995 Stan Shebs <shebs@andros.cygnus.com>
1399 * remote-e7000.c (why_stop): Add new kinds of strings to expect
1401 (e7000_wait): Add interpretations for more stop reasons,
1402 including warnings for write protect and cycle address errors.
1404 Wed Mar 29 17:09:29 1995 Stu Grossman (grossman@cygnus.com)
1406 start-sanitize-gdbtk
1407 * Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate
1408 locations (per-host) for X11 include files.
1409 * config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force
1410 the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs
1411 of the R5 include files.
1413 * monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of
1414 support for interrupting target.
1415 * monitor.c (monitor_open): Send stop command before doing
1417 * (monitor_load_srec): Fix record size calculation to prevent end
1418 of segment from getting trashed.
1419 * rom68k-rom.c: Update to latest version of struct monitor_ops.
1420 * config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order
1421 problems. Makes DOS hosted function calling work.
1422 * sparclite/crt0.s: Define _start to make COFF happy.
1424 Wed Mar 29 09:11:51 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1426 * defs.h (atof): Don't provide an external declaration if atof is
1429 Wed Mar 29 00:01:07 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1431 * rs6000-tdep.c (skip_prologue): Skip saving of LR and CR in
1432 the stack frame, fix typos in `st rx,NUM(r1)' and `stu r1,NUM(r1)'
1435 Tue Mar 28 17:04:04 1995 Per Bothner <bothner@kalessin.cygnus.com>
1437 * gdbtypes.c (create_range_type): If indextype has TYPE_FLAG_STUB
1438 set, set TYPE_FLAG_TARGET_STUB.
1439 (check_stub_type): Recalculate TYPE_LENGTH for range type.
1440 * stabsread.c (read_range_type): If index type number is followed
1441 by '=', back up, call read_type. and assume we have a true range.
1442 * gdbtypes.h (TYPE_FLAG_TARGET_STUB): Update comment.
1444 Mon Mar 27 22:51:54 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1446 * alpha-nat.c, irix4-nat.c, irix5-nat.c, mipsv4-nat.c,
1447 sparc-tdep.c (supply_gregset, supply_fpregset): Fill inaccessible
1448 registers with zero to handle recent read_register_bytes change.
1449 * irix4-nat.c, irix5-nat.c, mipsv4-nat.c (supply_gregset,
1450 fill_gregset): Fix handling of CAUSE_REGNUM.
1451 * mips-nat.c (store_inferior_registers): Handle unwritable
1452 registers when storing a single register.
1453 * config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM):
1456 * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Clear
1457 allocated mips_extra_func_info, if the debug info is corrupt,
1458 the PDR to fill it in might be missing.
1460 Mon Mar 27 14:43:00 1995 Kung Hsu <kung@mexican.cygnus.com>
1462 * vx-share/regPacket.h: a new file interfacing with vxworks.
1464 Sun Mar 26 13:22:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1466 * breakpoint.c (bpstat_do_actions): Once we've executed the
1467 commands, set bs->commands to NULL.
1469 Sat Mar 25 01:16:10 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1471 * buildsym.c (patch_subfile_name): Update last_source_file
1472 with the real source file name.
1473 * dbxread.c (end_psymtab): Handle static functions in the
1474 SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename
1475 to lookup_minimal_symbol.
1476 (process_one_symbol): Ignore extra outermost context from
1478 * stabsread.c (define_symbol): Do not complain for SunPRO
1479 static variable encoding if STATIC_TRANSFORM_NAME is defined.
1480 * sparc-tdep.c, config/sparc/tm-sun4sol2.h
1481 (sunpro_static_transform_name): Renamed from
1482 solaris_static_transform_name.
1483 * config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
1484 Define to sunpro_static_transform_name for acc 3.0 compiled
1486 * procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS):
1487 Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults
1489 * procfs.c (info_proc_siginfo): Cast sip->si_addr to
1490 `unsigned long' and use `lx' format for printing it.
1492 Fri Mar 24 15:45:42 1995 Stu Grossman (grossman@cygnus.com)
1494 * configure.in: Move test for m68*-est-* before m68*-*-coff*.
1495 * findvar.c: Move default def of CANNOT_STORE_REGISTER closer to
1496 the beginning of the code.
1497 * (write_register_gen): New routine. Analogous to
1499 * (write_register_bytes): Another rewrite! Make it smarter about
1500 not updating regs with the same value.
1501 * monitor.c (printf_monitor readchar): Use stderr instead of
1502 stdout to output debug info. Also cleanup readchar a little.
1503 * (expect): Make sure that excessive responses are null
1505 * (monitor_open): Check for magic number in monitor_ops struct.
1506 Allow multiple commands as init strings. Also, clear all
1508 * (monitor_resume monitor_wait): Send a command to dump all the
1509 regs for those targets which don't do so when waking up after a
1511 * (monitor_wait): Handle excessive response output better.
1512 * (monitor_write_memory): Use block fill, word, and long word
1513 commands (if they exist) to write memory more efficiently.
1514 * General cleanups to use flag bits instead of individual flag
1515 words in monitor_ops struct.
1516 * (monitor_command): Return output from command.
1517 * (monitor_load_srec): Allocate buffer only once. Use alloca.
1518 Wait for load response string instead of using a timeout to start
1519 sending S-records. Fix bug where value of srec_frame shrinks. If
1520 hashmark is set, print `-' for retransmissions. General cleanups.
1521 * (monitor_make_srec): Get rid of S-record default type kludge.
1522 * monitor.h: Use seperate struct for memory and register
1523 read/write commands. Memory commands can come in byte, word,
1524 long, and longlong forms.
1525 * (monitor_ops): Change lots of fields. Generalize some stuff.
1526 Put all flags into flags word. Allow init to be a list of commands.
1527 Add command for clearing all breakpoints, block fill, dumping all
1529 * remote-est.c: Rewrite to use new monitor conventions.
1530 * config/m68k/est.mt (TDEPFILES): Add monitor.o.
1531 * config/m68k/tm-est.h: Set NUM_REGS to 18.
1532 * testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test
1535 Thu Mar 23 23:20:00 1995 Jeff Law (law@snake.cs.utah.edu)
1537 * somsolib.c (som_solib_add): Handle case where a shared library
1538 referenced by a core file has sections without the SEC_ALLOC bit
1539 set (eg stabs sections).
1541 Thu Mar 23 15:07:08 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1543 * breakpoint.c (bpstat_do_actions): For each element in the bpstat
1544 chain, do all the commands regardless of whether they run the
1547 Wed Mar 22 19:17:06 1995 Doug Evans <dje@cygnus.com>
1549 * mem-break.c (LITTLE_BREAKPOINT, BIG_BREAKPOINT): Define as
1550 BREAKPOINT if mono-endian.
1551 (break_insn): Deleted.
1552 (big_break_insn, little_break_insn): Define.
1553 (memory_insert_breakpoint): Handle bi-endian cpus.
1554 (BREAKPOINT_LEN): Define.
1555 (memory_remove_breakpoint): Use it.
1556 (memory_breakpoint_size): Likewise.
1558 Tue Mar 21 17:03:17 1995 Kung Hsu <kung@mexican.cygnus.com>
1560 * sparc-stub.c: add nop after 'bg good_wim'.
1561 * sparcl-stub.c: ditto.
1563 Tue Mar 21 13:34:12 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1565 * infrun.c (handle_command): Don't print TARGET_SIGNAL_0,
1566 TARGET_SIGNAL_UNKNOWN, or TARGET_SIGNAL_DEFAULT.
1568 Mon Mar 20 10:09:59 1995 Jeff Law (law@snake.cs.utah.edu)
1570 * hppab-nat.c (store_inferior_registers): Sync with HPUX version.
1572 Mon Mar 20 07:34:48 1995 Stu Grossman (grossman@cygnus.com)
1574 * hppah-nat.c (store_inferior_registers): Move check for
1575 CANNOT_STORE_REGISTER to a better place. Fixes ptrace I/O errors
1576 found by test suite during function calls, which attempts to write
1577 unwritable registers.
1579 Sat Mar 18 02:02:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1581 * mdebugread.c (parse_symbol): If finishing a function without
1582 known parameter type info, set that from parameter symbols.
1583 Remove commented-out add_param_to_type support.
1585 Thu Mar 16 16:38:03 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1587 * xcoffread.c (process_linenos): Make sure filename we pass to
1588 start_subfile will cause deduce_language_from_filename to return
1589 the correct thing. Reindent function to GNU standards.
1591 Thu Mar 16 15:54:00 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1593 * nlm/gdbserve.c (handle_exception): #if out call to StopBell,
1594 as it is not available on NetWare 3 or PIN.
1595 * nlm/ppc.c (StopBell): Removed.
1597 Thu Mar 16 12:14:41 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1599 * xcoffread.c (read_xcoff_symtab): When creating a dummy parameter
1600 inferred from the traceback tags, give its type the name
1601 "<non-float parameter>".
1603 * stabsread.c (rs6000_builtin_type): Recognize types -31 to -34.
1605 Wed Mar 15 15:09:29 1995 Stu Grossman (grossman@cygnus.com)
1607 * findvar.c (read_register_bytes write_register_bytes): Make
1608 these routines much smarter about updating registers from the
1609 target, only doing so when absolutely necessary. This really
1610 speeds up register modification on some remote targets.
1612 * monitor.c: More cleanups. Get rid of monitor_load_ascii_srec.
1613 BFD makes this unnecessary. Lots of debugging speedups.
1614 * (expect): NULL terminate return string.
1615 * (monitor_open monitor_supply_register parse_register_dump
1616 monitor_wait monitor_fetch_register): Switch to using GNU regexp
1617 library to parse multi-register displays.
1618 * (monitor_read_memory): Read multiple bytes (up to 16) at once.
1619 * (monitor_create_inferior): Call clear_proceed_status to make run
1620 command notice first breakpoint.
1621 * (monitor_load): Clean up. Reset inferior_pid, set pc to start
1622 address and reset symbol table stuff to make loads put things into
1624 * (monitor_load_srec): Lower sleep time to 1 second.
1626 * monitor.h (struct monitor_ops): Add register_pattern and
1627 supply_register to monitor_ops.
1629 * rom68k-rom.c: Add new support for handling register dumps.
1630 * config/m68k/tm-m68k.h: Define D0_REGNUM and A0_REGNUM for register
1633 Wed Mar 15 15:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1635 * utils.c, defs.h (putchar_unfiltered, fputc_unfiltered): Make
1636 argument be an int, not a char. Using a prototype followed by an
1637 old-style function definition in a case where an argument is
1638 widened is a GCC-ism not supported by the native AIX compiler.
1640 Wed Mar 15 12:22:35 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1642 * nlmstub.def: Removed, this was moved to nlm/gdbserve.def
1645 * configure.in (alpha-*-netware*): Removed configuration.
1646 * config/alpha/{alpha-nw.mt, gdbserve.mt, tm-alphanw.h}: Removed.
1647 * nlm/{README-ALPHA-NETWARE, aio.h, alpha-io.S, alpha-regdef.h,
1648 alpha.c, alpha.h, altdebug.h}: Removed.
1650 * nlm/gdbserve.c (main): Add support for processing BOARD=
1651 argument, deprecate NODE=.
1653 Wed Mar 15 10:58:26 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1655 * c-exp.y (yylex): Make an empty character constant an error.
1657 Tue Mar 14 15:00:54 1995 Per Bothner <bothner@kalessin.cygnus.com>
1659 * valops.c (value_arg_coerce): Do possible value_coerce_array
1660 before determining type argument to value_cast.
1662 Tue Mar 14 10:41:41 1995 Kung Hsu <kung@mexican.cygnus.com>
1664 * remote-es.c: Replace ignore with 0.
1666 Tue Mar 14 05:52:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1668 * valops.c (value_repeat), eval.c (evaluate_subexp_standard):
1669 If VALUE_REPEATED is already set, just error out.
1671 * valops.c (value_cast, value_slice), parse.c (follow_types): Add
1672 FIXME-type-allocation comments.
1674 * gdbtypes.h (struct type): Fix comment about what units the
1677 Mon Mar 13 18:27:25 1995 Stan Shebs <shebs@andros.cygnus.com>
1679 * ch-valprint.c (annotate.h): Include.
1680 * eval.c (evaluate_subexp_standard): Remove unused variable.
1681 (calc_f77_array_dims): Add parens to expression.
1682 * f-exp.y (yylex): Add parens to expression, remove unused label.
1683 * f-lang.h (calc_f77_array_dims): Declare.
1684 * f-valprint.c (f_val_print): Remove unused variables.
1686 Mon Mar 13 15:25:47 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1688 * alpha-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
1689 use the PDR, just examine prologues instead.
1692 Fri Mar 10 16:13:18 1995 Kung Hsu <kung@mexican.cygnus.com>
1694 * config/tm-arc.h: Change arc register names.
1697 Fri Mar 10 02:49:40 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1699 Fix problems with infinite recursion when printing a class
1700 that contains a static instance of the class.
1701 * cp-valprint.c (dont_print_vb_obstack): Renamed from
1702 dont_print_obstack, made static.
1703 (dont_print_statmem_obstack): New obstack, controls printing
1704 of static member classes.
1705 (_initialize_cp_valprint): Initialize it.
1706 (cp_print_static_field): New function, handles printing of
1708 (cp_print_value_fields): New parameter dont_print_statmem to
1709 handle recursive printing of static member classes, use
1710 cp_print_static_field to handle printing of static members.
1711 * c-valprint.c (cp_print_value_fields): Update prototype and
1712 call to include additional dont_print_statmem parameter.
1713 * c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused
1716 * alpha-tdep.c, findvar.c, infptrace.c: Include <string.h>.
1718 * config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call
1719 alpha_find_saved_regs if fi->saved_regs is still NULL.
1721 * elfread.c (elf_symtab_read): Ensure that the filename field
1722 of a minsym is nonempty. Ignore solib trampoline symbols from
1723 the main symbol table, they might have a bogus value.
1725 * procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
1726 Fix typos in comments.
1728 Thu Mar 9 17:19:47 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1730 * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Initialize
1731 pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1. That way
1732 we know whether the PDR ever got set.
1733 * mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
1734 use the PDR, just examine prologues instead.
1736 Wed Mar 8 23:35:10 1995 Jeff Law (law@snake.cs.utah.edu)
1738 * somsolib.c (som_solib_section_offsets): Get offset of text
1741 Wed Mar 8 16:12:21 1995 Stu Grossman (grossman@cygnus.com)
1743 start-sanitize-gdbtk
1744 * gdbtk.c (gdb_get_breakpoint_info): Return error if breakpoint
1745 type is not bp_breakpoint.
1748 * source.c (forward_search_command reverse_search_command): Set
1749 convenience variable $_ to be the line # of the match.
1750 * symtab.c (decode_line_1): Allow convenience variables to be
1751 used in line specs (for breakpoints and such).
1753 Wed Mar 8 12:51:00 1995 Stan Shebs <shebs@andros.cygnus.com>
1755 * Makefile.in (VERSION): Bump to 4.14.1.
1756 * NEWS, README: Update for 4.14.
1757 * i386v-nat.c (i386_insert_aligned_watchpoint): Fix declaration.
1758 (i386_insert_nonaligned_watchpoint): Call aligned instead of
1759 generic watchpoint insertion.
1761 Tue Mar 7 19:26:10 1995 Per Bothner <bothner@kalessin.cygnus.com>
1763 * valops.c (value_slice): Do COERCE_VARYING_ARRAY.
1765 Tue Mar 7 00:23:47 1995 Stu Grossman (grossman@cygnus.com)
1767 * monitor.c, array-rom.c, monitor.h, rom68k-rom.c: Move target_ops
1769 * monitor.c (monitor_create_inferior): Allow run command to start
1772 * monitor.c (monitor_load): Set PC to start address when done
1775 * array-rom.c, monitor.h, rom68k-rom.c: Clean up target_ops.
1776 Remove ref to monitor_create_inferior.
1778 * monitor.c: More general cleanups. Add prototypes, remove
1779 unused routines. Fix bug with wrong number of args to error().
1781 * main.c (main): Don't start up GUI when running under gdb mode
1784 * Makefile.in: Add rules for monitor.o and rom68k-rom.o to make
1785 Sun make (with VPATH) work...
1787 * monitor.c, monitor.h, rom68k-rom.c: Serious cleanup to make IDP
1788 (rom68k) target work right.
1789 * array-rom.c, op50-rom.c, w89k-rom.c: Partial updates to new
1790 monitor.c interface. More work needs to be done here.
1791 * config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to
1792 match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no
1793 floating-point for this card.
1795 * serial.h, ser-go32.c, ser-go32-para.c, ser-mac.c, ser-tcp.c,
1796 ser-unix.c: Add SERIAL_SETSTOPBITS to set the number of stopbits
1797 (needed for IDP board?!?!?).
1799 * defs.h, utils.c, remote-hms.c, remote-pa.c, remote.c: Fix defs
1800 and usage of fputc_unfiltered and putchar_unfiltered. Eliminate
1801 putc_unfiltered (it's superfluous).
1803 * command.h, command.c, top.c: Add var_enum command type. It's
1804 like var_string but allows only only one of the specified strings.
1806 Mon Mar 6 15:03:59 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1808 * valops.c (value_cast): Don't use backslash newline--pre-ANSI
1809 compilers (such as SunOS4 /bin/cc) don't generally support it
1810 except in some contexts.
1812 Fri Mar 3 17:42:48 1995 Per Bothner <bothner@kalessin.cygnus.com>
1814 * valops.c (value_cast): Check for cast to array type *before*
1815 we coerce array to pointer (in case arg2 is already array).
1817 * valops.c (call_function_by_hand): Set using_gcc to 2 if using
1818 gcc2. Needed for REG_STRUCT_HAS_ADDR to work on sparc.
1819 Also check REG_STRUCT_HAS_ADDR for union, array and string types.
1821 * valops.c (call_function_by_hand): Re-arrange code for pushing
1822 paramaters on the stack so we can do better STACK_ALIGN.
1824 * valops.c (call_function_by_hand): Call error if the number
1825 of arguments is fewer than parameter types in function type.
1827 Fri Mar 3 17:13:05 1995 Doug Evans <dje@canuck.cygnus.com>
1829 * sparc-tdep.c (sparc_extract_struct_value_address): Move
1830 sparc64 support to here.
1831 (sparc64_extract_struct_value_address): Deleted.
1832 (dump_ccreg): Add a prototype so long long arg -> int.
1833 * sparc/tm-sp64.h (USE_STRUCT_CONVENTION): Define.
1834 (EXTRACT_STRUCT_VALUE_ADDRESS): Delete.
1836 Fri Mar 3 15:12:12 1995 Jeff Law (law@snake.cs.utah.edu)
1838 * hpread.c (hpread_record_lines): New argument "offset". All
1839 callers changed. Use it to handle dynamic address relocation.
1840 (hpread_build_psymtabs): Adjust texthigh as we read each function
1841 debug symbol. Fix computation of texthigh.
1842 (hpread_read_subrange_type): Work around macro bugs in HP's
1844 (hpread_process_one_debug_symbol): Correctly map source lines.
1846 * somread.c (check_strange_names): Filter names emitted by the HP
1847 compiler when generating PIC code.
1849 * valops.c (value_struct_elt_for_reference): Work around macro
1850 bugs in HP's compilers.
1851 * c-exp.y (block): Likewise.
1853 Fri Mar 3 12:27:28 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1855 * rs6000-tdep.c (push_dummy_frame): Fix order of arguments to
1858 * utils.c [_AIX]: Include stddef.h instead of #defining size_t.
1860 Fri Mar 3 12:33:24 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1862 * rs6000-tdep.c (skip_prologue): Skip multiple stores of the saved
1863 registers that GCC emits on the PowerPC by default in addition to
1864 the store multiple instruction used on the Power series.
1866 Fri Mar 3 00:54:58 1995 Doug Evans <dje@canuck.cygnus.com>
1868 * sparc-tdep.c (decode_asi): New function.
1869 (sparc_print_register_hook): Pretty print more v9 registers.
1870 * sparc/tm-sp64.h (REGISTER_NAMES): Fix some typos.
1872 Thu Mar 2 22:20:22 1995 Doug Evans <dje@canuck.cygnus.com>
1874 * dwarfread.c (struct dieinfo): Use CORE_ADDR for at_{low,high}_pc.
1875 (target_to_host): Change result type to CORE_ADDR.
1877 Thu Mar 2 15:13:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1879 * rs6000-tdep.c: Fix byte-swapping sins.
1881 Thu Mar 2 16:48:45 1995 Michael Meissner <meissner@cygnus.com>
1883 * rs6000-tdep.c (branch_dest): Minor code cleanup, don't share
1884 code between branch unconditional and branch conditional cases.
1886 Wed Mar 1 09:41:26 1995 Doug Evans <dje@canuck.cygnus.com>
1888 Various changes for sparc64.
1889 * sparc-tdep.c (NUM_SPARC_FPREGS): Define.
1890 (SPARC_INTREG_SIZE): Define.
1891 (*): Use SPARC_INTREG_SIZE instead of REGISTER_RAW_SIZE (intreg)
1893 (enum branch_type): New value `done_retry'.
1894 (isbranch): Renamed from isannulled. All callers changed.
1895 Support new sparc64 branch insns.
1896 (single_step): Handle done_retry.
1897 (sparc_extract_struct_value_address): Don't assume 4 byte regs.
1898 (get_saved_register): Likewise.
1899 (sparc_push_dummy_frame): Likewise.
1900 (sparc_frame_find_saved_regs): Likewise.
1901 (sparc_pop_frame): Likewise. Don't refer to FPS_REGNUM, CPS_REGNUM,
1902 or PS_REGNUM if not sparc64. sparc64 has 64 fp regs.
1903 (sparc64_extract_struct_value_address): New function.
1904 (dump_ccreg, sparc_print_register_hook): Likewise.
1905 * sp64-tdep.c: Deleted.
1906 * sparc/tm-sp64.h (GDB_TARGET_IS_SPARC64): Define.
1907 (NUM_REGS): Reduce by 2, cle/tle are in the pstate reg.
1908 (CC_HAS_LONG_LONG): Define.
1909 (REGISTER_NAMES): Delete cle/tle and reorganize.
1910 (PS_REGNUM, FPS_REGNUM, CPS_REGNUM): Delete, they're ifdef'd out of
1912 (REGISTER_BYTES): Update.
1913 (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Delete.
1914 (EXTRACT_RETURN_VALUE): Delete. Use definition in tm-sparc.h.
1915 (NO_SINGLE_STEP): Likewise.
1916 * sparc/tm-sparc.h (EXTRACT_VALUE_RETURN): Don't assume 4 byte regs.
1917 * sparc/sp64.mt: Move simulator support ...
1918 * sparc/sp64sim.mt: ... to here.
1920 Wed Mar 1 13:14:42 1995 Kung Hsu <kung@mexican.cygnus.com>
1922 * remote-vx960.c: new file for target specific register packaging.
1923 * remote-vx68.c: ditto.
1924 * config/i960/vxworks960.mt: add remote-vx960.o.
1925 * config/m68k/vxworks68.mt: add remote-vx68.o.
1927 Wed Mar 1 13:42:49 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1929 * remote.c (remote_wait): Make calls to strtol be type correct by
1930 passing the address of a char * pointer instead of an unsigned
1933 * rs6000-tdep.c (push_dummy_frame): Cast sp to char * when calling
1934 write_memory to make things type correct.
1936 Wed Mar 1 12:17:31 1995 Michael Meissner <meissner@cygnus.com>
1938 * ch-exp.y, c-exp.y, f-exp.y, m2-exp.y (yy defines): Support the
1939 standard Linux yacc by adding more names to be redefined with a
1942 Tue Feb 28 22:55:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1944 * hppa-tdep.c (pa_print_registers), monitor.c: Use
1945 extract_unsigned_integer and friends, not SWAP_TARGET_AND_HOST.
1946 * defs.h, findvar.c: Move SWAP_TARGET_AND_HOST back to findvar.c.
1947 Rename it to SWAP_FLOATING to make it clear it is no longer for
1950 Tue Feb 28 14:38:39 1995 Kung Hsu <kung@mexican.cygnus.com>
1952 * defs.h (SWAP_TARGET_AND_HOST): check endianess at runtime not
1956 * arc-tdep.c (_initialize_arc_tdep): set tm_print_insn according to
1958 * remote-arc.c (arc_wait): when a processor stops, stop other two
1960 * remote-arc.c (switch_command): switch tm_print_insn.
1963 * vx-share/ptrace.h: merge in WRS new ptrace requests.
1965 * defs.h: fix a syntax error.
1967 * a29k-tdep.c (get_longjmp_target): add this function, from WRS.
1968 * remote-vx.c: move read_register and write_register out to
1969 target specific files.
1970 * remote-vx29k.c (get_fp_contnets): add this function, from WRS.
1972 * defs.h: define SWAP_TARGET_AND_HOST macro.
1973 * findvar.c, monitor.c, hppa-tdep.c: remove definition of
1974 SWAP_TARGET_AND_HOST.
1976 Tue Feb 28 08:31:40 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1978 * alpha-tdep.c (find_proc_desc): Only attempt to set
1979 PROC_LOCALOFF (found_heuristic) if found_heuristic is non-NULL.
1981 Mon Feb 27 11:56:32 1995 Stan Shebs <shebs@andros.cygnus.com>
1983 * monitor.c: General gcc -Wall lint cleanup and reformat.
1984 (monitor_command): If no args, send an empty command.
1986 Thu Feb 23 21:07:25 1995 Stu Grossman (grossman@cygnus.com)
1988 * monitor.c (monitor_load_ascii_srec): Add a one second sleep
1989 after send LOAD_CMD to prevent loss of first S-record.
1991 Tue Feb 21 20:48:42 1995 Per Bothner <bothner@kalessin.cygnus.com>
1993 * valops.c (call_function_by_hand): Set using_gcc to 2 if gcc-2.
1994 Call error if too few arguments.
1995 If REG_STRUCT_HAS_ADDR (structs passed by invisible reference),
1996 copy and convert to reference *before* we calculate alignment.
1997 Also, make sure structs allocated for return values and invisible
1998 reference don't violate STACK_ALIGN.
2000 Tue Feb 21 23:29:59 1995 Per Bothner <bothner@rtl.cygnus.com>
2002 * ch-exp.y (expression_conversion): Recognize 'ARRAY () TYPE (EXPR)'
2003 (same as C's '(TYPE[])EXPR')
2005 Tue Feb 21 11:47:26 1995 Stan Shebs <shebs@andros.cygnus.com>
2007 * top.c (print_gdb_version): Update the year.
2009 Sun Feb 19 14:31:57 1995 Jim Kingdon <kingdon@rtl.cygnus.com>
2011 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Look for newlib in
2012 `..' not in `../..'.
2014 Sun Feb 19 11:05:28 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2016 * procfs.c (unconditionally_kill_inferior): Don't issue a PIOCKILL
2017 in addition to a PIOCSSIG to kill the inferior.
2019 Thu Feb 16 15:06:12 1995 Per Bothner <bothner@kalessin.cygnus.com>
2021 * parse.c (follow_types): Given (TYPE[]) (i.e. with no length),
2022 create a 0-length array type, and set BOUND_CANNOT_BE_DETERMINED.
2023 * valops.c (value_cast): If a cast like (TYPE[])VALUE (i.e. array
2024 of unknown length) use sizeof(VALUE)/sizeof(TYPE) as the length.
2025 * c-typeprint.c (c_type_print_varspec_suffix): If array length
2026 is 0, print it, but not if upper_bound is BOUND_CANNOT_BE_DETERMINED.
2028 Thu Feb 16 16:06:50 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2030 * dcache.c (insque, remque): Rewrite Linux support.
2032 Wed Feb 15 12:33:20 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2034 * config/powerpc/tm-ppc-eabi.h (TEXT_SEGMENT_BASE): Define as 1.
2036 * dcache.c (insque, remque): If compiling in standard C on Linux,
2037 protect insque and remque with macros to cast the pointer
2038 arguments to the proper type.
2040 Tue Feb 14 17:16:41 1995 Stu Grossman (grossman@cygnus.com)
2042 * annotate.c, breakpoint.c, defs.h, top.c: Replace
2043 enable/disable_breakpoint_hook with modify_breakpoint_hook.
2044 start-sanitize-gdbtk
2046 * gdbtk.c: General cleanups, get rid of unused variables. Redo
2047 handling of stdout/stderr to just return output as the result of
2048 the tcl command that caused the output. Cleanup -Wall stuff.
2049 * (breakpoint_notify): Now returns just action and breakpoint
2051 * (gdb_get_breakpoint_list): New routine. Does the obvious.
2052 * (gdb_get_breakpoint_info): Mostly derived from the old
2053 breakpoint_notify, but returns lots more info.
2054 * (dsprintf_append_element): Helper routine, works like printf,
2055 but appends a tcl element onto the specified DString. Good for
2056 building up lists as return values.
2057 * (gdbtk_enable/disable_breakpoint): Go away. Replaced with
2058 gdbtk_modify_breakpoint.
2059 * (*many routines*): Use new result protocol.
2060 * (call_wrapper): Make sure that recursive calls don't trash results.
2061 * gdbtk.tcl: New windows, autocmd, and breakpoints.
2062 * (gdbtk_tcl_fputs): Don't use $current_output_win redirection
2063 anymore. It's not needed (in fact, this routine may not be needed
2065 * (gdbtk_tcl_breakpoint): Change to reflect new breakpoint
2066 notification protocol.
2067 * (gdbtk_tcl_busy gdbtk_tcl_idle): Straighten out buttons, remove
2069 * (interactive_cmd): Use this wrapper around button invocations
2070 of many commands. This will catch errors and put the results into
2071 the command window. It also updates all the other windows.
2072 * Also, change reliefs of most things to sunken. This actually
2074 * (create_file_win): Fix margin binding to allow breakpoints to
2076 * (create_asm_win): Use return value of gdb_disassemble instead
2077 of implicit I/O to the command window.
2078 * (create_command_window): Use new result protocol to get output
2082 Tue Feb 14 16:58:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2084 * expression.h: Move declaration of evaluate_subexp_with_coercion
2086 * value.h: ...to here.
2087 * expression.h: Don't include value.h
2089 Tue Feb 14 11:46:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2091 * expression.h: Move include of value.h until after declaration of
2094 Sun Feb 12 13:47:30 1995 Stan Shebs <shebs@andros.cygnus.com>
2096 * remote-e7000.c: Comprehensive cleanup; removal of dead code,
2097 simplify code, declare things, format to standards.
2098 (inferior.h, value.h, command.h, remote-utils.h): Include.
2099 (e7000_login): Rename to e7000_login_command.
2100 (e7000_ftp): Rename to e7000_ftp_command.
2101 (e7000_drain): Rename to e7000_drain_command.
2103 * irix5-nat.c (string.h): Include near beginning of file.
2105 Sun Feb 12 12:36:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2107 * valops.c (value_arg_coerce): Use VALUE_TYPE not SYMBOL_TYPE on
2108 arg, it is a value not a symbol.
2111 * eval.c: Move declaration of evaluate_subexp_with_coercion from here..
2112 * expression.h: ..to here.
2113 * expression.h: Include value.h.
2114 * ch-lang.c (evaluate_subexp_chill): Add default case in switch.
2116 Sun Feb 12 11:03:47 1995 Per Bothner <bothner@kalessin.cygnus.com>
2118 * language.h (struct language_defn): New field evaluate_exp.
2119 * c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn),
2120 f-lang.c (f_language_defn), language.c (unknown_language_defn,
2121 auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn):
2122 Set evaluate_exp to evaluate_subexp_standard.
2123 * ch-lang.c (evaluate_subexp_chill): New function. Chill-specific
2124 support for MULTI_SUBSCRIPT.
2125 (chill_language_defn): Set evaluate_exp to evaluate_subexp_chill.
2126 * eval.c (enum noside): Move from here ....
2127 * expression.h (enum noside): ... to here.
2128 (evaluate_subexp_standard): New prototype.
2129 * eval.c (evaluate_subexp): Renamed to evaluate_subexp_standard.
2130 Removed lo-longer-needed test for chill_varying_type.
2131 (evaluate_subexp): New. Calls exp->language_defn->evaluate_exp.
2133 * ch-exp.y (maybe_expression_list): New non-terminal.
2134 (primitive_value): Allow empty parameter list.
2136 Sun Feb 12 10:02:16 1995 Per Bothner <bothner@cygnus.com>
2138 * buildsym.c (finish_block): If finishing a function without known
2139 parameter type info, set that from parameter symbols.
2140 * c-typeprint.c (c_type_print_varspec_suffix): For TYPE_CODE_FUNC,
2141 print parameter types, if available.
2142 * ch-typeprint.c (chill_type_print_base): Likewise.
2144 * gdbtypes.h (struct type): Remove function type field.
2145 (TYPE_FUNCTION_TYPE): Remove macro. We can't as simply re-use
2146 function types now that we're also storing parameter types.
2147 And the payoff is much less.
2148 * gdbtypes.c (make_function_type): Don't use/set TYPE_FUNCTION_TYPE.
2149 (recursive_dump_type): Don't print TYPE_FUNCTION_TYPE.
2150 * dwarfread.c (read_subroutine_type): Don't set TYPE_FUNCTION_TYPE.
2152 * valops.c (value_arg_coerce): Now takes param_type argument.
2153 (call_function_by_hand): Convert arguments with value_arg_coerce
2154 early, and overwrite original args with converted args.
2155 No longer need multiple calls to value_arg_coerce.
2156 (value_arg_push): Removed.
2157 * hppa-tdep.c (hppa_push_arguments): No longer call value_arg_coerce.
2158 * mips-tdep.c (mips_push_arguments): Likewise.
2159 * alpha-tdep.c (alpha_push_arguments): Likewise.
2160 * rs6000-tdep.c (push_arguments, ran_out_of_registers_for_arguments):
2162 * value.h (value_arg_coerce): Remove declaration. (It's now static.)
2164 * valops.c (value_cast): Do COERCE_VARYING_ARRAY after COERCE_REF.
2166 * symtab.c (add_param_to_type): Remove (commented-out) function,
2167 since that functionality has been re-written.
2168 * coffread.c: Remove commented-out add_param_to_type support.
2169 * mdebugread.c (parse_symbol): Likewise.
2170 * stabsread.c (define_symbol): Likewise.
2172 Sun Feb 12 09:03:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2174 * buildsym.c (start_subfile): Set language for f2c like for cfront.
2176 Thu Feb 9 20:20:11 1995 Rob Savoye <rob@darkstar.cygnus.com>
2178 * op50n-rom.c: Add the control registers.
2180 Thu Feb 9 15:46:39 1995 Stan Shebs <shebs@andros.cygnus.com>
2182 * Makefile.in (CLIBS): Add $(LIBIBERTY) before, in addition to
2183 after, any host/target/native libraries.
2184 * dcache.c (insque, remque): Remove declarations.
2185 * gdbtypes.h (type_code): Remove trailing comma.
2188 * xcoffread.c (read_xcoff_symtab) [C_HIDEXT]: Move #ifdef
2189 STATIC_NODEBUG_VARS inside case.
2191 Thu Feb 9 07:43:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2193 * config/sparc/tm-sun4sol2.h: Define STATIC_TRANSFORM_NAME.
2194 * partial-stab.h: Call it.
2195 * stabsread.c (define_symbol) [STATIC_TRANSFORM_NAME]: Call
2196 STATIC_TRANSFORM_NAME to get the name and use minimal symbols to
2198 * sparc-tdep.c (solaris_static_transform_name): New function.
2200 Thu Feb 9 12:09:09 1995 Jeff Law (law@snake.cs.utah.edu)
2202 * somread.c (som_symtab_read): Handle dynamic relocation for both
2203 text and data symbols.
2204 (som_symfile_offsets): If objfile is a shared library, then get
2205 text and data offsets from the shared library structures.
2206 * somsolib.c (som_solib_add): Copy the bfd pointer from the
2207 objfile rather than reopening the file again.
2208 (som_solib_section_offsets): New function.
2209 * somsolib.h (som_solib_section_offsets): Declare.
2211 Wed Feb 8 20:32:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2213 * config/sparc/tm-sun4sol2.h, dbxread.c: Rename
2214 N_SO_ADDRESS_MAYBE_MISSING to SOFUN_ADDRESS_MAYBE_MISSING.
2215 * symtab.h (minimal_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: Add
2217 * elfread.c (record_minimal_symbol_and_info),
2218 minsyms.c, symtab.h (prim_record_minimal_symbol_and_info): Return
2219 newly created symbol.
2220 * elfread.c (elf_symtab_read) [SOFUN_ADDRESS_MAYBE_MISSING]:
2221 Set filename field of minimal symbol.
2222 * symmisc.c (dump_msymbols) [SOFUN_ADDRESS_MAYBE_MISSING]:
2223 Print filename field.
2224 * minsyms.c, symtab.h (lookup_minimal_symbol): New arg sfile.
2225 * symm-tdep.c, somsolib.c, hppa-tdep.c, c-exp.y, f-exp.y,
2226 m2-exp.y, nindy-tdep.c, m3-nat.c, irix5-nat.c, hpread.c,
2227 os9kread.c, breakpoint.c, alpha-tdep.c, valops.c, symtab.c,
2228 printcmd.c, dbxread.c: Change callers to pass NULL for sfile.
2229 * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
2230 Find address of function from minimal symbols.
2231 * partial-stab.h, case 'f', 'F': Call find_stab_function_addr
2232 instead of getting pst->textlow from the stab.
2233 * minsyms.c (find_stab_function_addr): New function.
2235 Wed Feb 8 19:19:56 1995 Rob Savoye <rob@darkstar.cygnus.com>
2237 * monitor.c: Fix so all the output shows up in the GUI command
2240 Mon Feb 6 18:50:59 1995 Stan Shebs <shebs@andros.cygnus.com>
2242 * i386-tdep.c (_initialize_i386_tdep): Put void decl on separate
2243 line, so init.c generation works correctly.
2245 * arc-tdep.c (_initialize_arc_tdep): Ditto.
2248 Mon Feb 6 14:44:36 1995 Rob Savoye <rob@darkstar.cygnus.com>
2250 * config/mips/idt.mt: Add support for the lsi33k target.
2251 * config/sparc/sun4sol2.mh: Add support for ser-tcp.
2252 * array-rom.c: Finish the rest of the support commands needed by
2254 * mips-tdep.c: Add LSI33k register names and processor type.
2256 start-sanitize-gdbtk
2257 Sun Feb 5 20:32:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2259 * gdbtk.c (gdb_disassemble): Deference pointer to function before
2260 calling it (pre-ANSI compilers generally require this).
2263 Sat Feb 4 13:29:52 1995 Stan Shebs <shebs@andros.cygnus.com>
2265 * config/m68k/est.mt (TDEPFILES): Remove m68k-pinsn.o.
2267 Fri Feb 3 16:47:31 1995 Kung Hsu <kung@mexican.cygnus.com>
2269 * ser-go32-para.c (dos_read): fix syntax errors.
2271 Fri Feb 3 11:19:20 1995 Stu Grossman (grossman@cygnus.com)
2273 * core.c (dis_asm_read_memory), defs.h, top.c: Get rid of
2274 dis_asm_read_memory_hook. We can now call the disassemblers
2275 directly and have no need for this hook anymore.
2276 start-sanitize-gdbtk
2277 * gdbtk.c (gdb_disassemble): Ditto.
2279 * defs.h, printcmd.c: Make print_insn be static.
2281 * ser-go32.c (dos_comisr): Make this 8 bit clean.
2282 * (dos_open dos_close): Allow multiple opens to the same device.
2283 Use a ref count to prevent unwanted deallocations.
2284 * sparcl-tdep.c: Put #ifdefs around all socket stuff to make GO32
2286 * (sparclite_ops): Switch to download_stratum.
2287 * target.h (enum strata): Move download_stratum before
2288 process_stratum so that executable targets get pushed on top of
2291 Thu Feb 2 19:02:45 1995 Rob Savoye <rob@darkstar.cygnus.com>
2293 * array-rom.c: Remove the non GDB remote protocol config stuff.
2295 * monitor.c: All reading/writing functions for memory and
2298 Thu Feb 2 16:11:04 1995 Kung Hsu <kung@mexican.cygnus.com>
2301 * config/arc/arc.mt: new target makefile for arc processor.
2302 * config/arc/tm-arc.h: new target header for arc processor.
2303 * config/arc/go32.mh: new go32 host makefile for arc processor.
2304 * config/arc/xm-go32.h: new go32 host header for arc processor.
2305 * arc-tdep.c: new target dependent codes for arc processor.
2306 * remote-arc.c: new file for arc-specific protocol through
2309 * ser-go32-para.c: new file for go32 parallel port communication.
2311 Thu Feb 2 13:58:40 1995 Stan Shebs <shebs@andros.cygnus.com>
2313 * Makefile.in (VERSION): Bump to 4.13.2.
2315 Thu Feb 2 07:27:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2317 Fix compiler warnings:
2318 * remote-e7000.c (printf_e7000debug): Rename to puts_e7000debug
2319 and have the caller do the sprintf. Saves us from varargs hell.
2320 (normal): Define before use.
2321 * remote-e7000.c: Reindent a few things.
2323 Wed Feb 1 21:16:42 1995 Per Bothner <bothner@kalessin.cygnus.com>
2325 * f-typeprint.c (f_type_print_varspec_suffix): Print array index
2326 ranges in reverse order.
2327 * f-valprint.c (f77_create_arrayprint_offset_tbl): Fix calculation.
2329 * eval.c (evaluate_subscript): Don't call value_subscript, since
2330 it adjusts for lower bound and enforces ranges.
2332 * expression.h (exp_code): Remove MULTI_F77_SUBSCRIPT, OP_F77_SUBSTR.
2333 * eval.c, parse.c: Removed uses of removed opcodes.
2334 * eval.c (evaluate_subexp): Clean up handling of
2335 OP_UNDETERMINED_ARGLIST (no backtracking, more general).
2337 * f-valprint.c (f_val_print): Print TYPE_CODE_STRING using
2338 LA_PRINT_STRING, and not val_print_string (which reads from inferior).
2340 * ch-lang.c (chill_is_varying_struct), ch-lang.h: Remve function
2341 duplicate function made redundant by chill_varying_type.
2343 Re-write of f77 string and complex number support:
2345 * language.h (struct language_defn): New fields string_lower_bound
2346 and string_char_type.
2347 * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn),
2348 language.c (unknown_language_defn, auto_language_defn,
2349 local_language_defn), m2-lang.c (m2_language_defn), f-lang.c
2350 (f_language_defn), ch-lang.c (chill_language_defn): Set new fields.
2351 * gdbtypes.c (create_string_type): Use new string_char_type field.
2352 * valops.c (value_string): Use new string_lower_bound field.
2354 * defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT): Removed.
2355 * f-lang.c (f_create_fundamental_type, _initialize_f_language),
2356 m2-lang.c (m2_create_fundamental_type),
2357 gdbtypes.c (_initialize_gdbtypes): Set TYPE_TARGET_TYPE of complex
2358 types. Set their TYPE_CODEs to TYPE_CODE_COMPLEX.
2359 * mdebugread.c (mdebug_type_complex, mdebug_type_double_complex):
2360 Removed. Use builtin_type_complex and builtin_type_double_complex.
2362 * gdbtypes.h (enum type_code): Removed TYPE_CODE_LITERAL_STRING
2363 and TYPE_CODE_LITERAL_COMPLEX.
2364 * c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c: Removed uses of
2365 TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX.
2366 * gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type,
2367 f77_create_literal_string_type): Removed.
2368 * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR,
2369 VALUE_SUBSTRING_MYADDR): Removed.
2371 * expression.h (enum exp_opcode): Rename OP_F77_LITERAL_COMPLEX to
2373 * parse.c: Update accordingly.
2375 * f-valprint.c (f77_print_cmplx): Removed.
2376 (f_val_print case TYPE_CODE_COMPLEX): Re-write to use print_floating.
2378 * f-exp.y (STRING_LITERAL): Use OP_STRING instead of OP_ARRAY.
2379 * eval.c (evaluate_subexp): For case OP_ARRAY, don't call
2380 f77_value_literal_string.
2381 * valops.c, value.h (f77_value_literal_string, f77_value_substring,
2382 f77_assign_from_literal_string, f77_assign_from_literal_complex):
2384 (value_assign): No longer need to handle literal types.
2385 * valops.c (f77_value_literal_complex), value.h: Re-written and
2386 renamed to value_literal_complex. Last arg is now a (complex) type.
2387 * valops.c (f77_cast_into_complex): Re-written and renamed to
2389 * eval.c (evaluate_subexp): Update accordingly.
2391 * ch-valprint.c (chill_val_print): On TYPE_CODE_STRING, don't
2392 print address for non-'s'-formats.
2393 * ch-typeprint.c, ch-valprint.c: Use chill_varying_type instead
2394 of chill_is_varying_struct.
2396 Wed Feb 1 13:27:33 1995 Stan Shebs <shebs@andros.cygnus.com>
2399 * alpha-tdep.c (alpha_in_lenient_prologue): Comment out.
2400 (after_prologue): Remove unused local b.
2401 * procfs.c (thread.h): Include.
2402 (pr_flag_table, pr_why_table, faults_table, siginfo_table): Use
2403 nested braces in initializer.
2404 * top.c (initialize_targets, initialize_utils): Declare.
2405 (locate_arg, insert_args): Add parens around tested assignments.
2406 * remote-utils.c (sr_scan_args): Remove decl of strtol.
2407 * remote.c (thread.h): Include.
2408 (remote_wait): Remove unused local p2.
2409 * sparc-tdep.c (fill_gregset, fill_fpregset): Remove decls of
2412 defs.h (stdlib.h): Include.
2413 (exit, perror, atoi, qsort, memcpy, memcmp): Don't declare.
2414 (fclose, atof, malloc, realloc, free, strchr, strrchr, strstr,
2415 strtok, strerror): Don't specify parameter types in declaration.
2417 Wed Feb 1 12:23:57 1995 Per Bothner <bothner@kalessin.cygnus.com>
2419 * ch-exp.y (value_string_element, string_primitive_value,
2420 start_element, left_element, right_element, slice_size,
2421 lower_element, upper_element, first_element): Removed.
2422 (value_string_slice, value_array_slice): Replaced by ...
2423 (slice): New non-terminal, with working slice support.
2424 (primitive_value_lparen, rparen): New non-terminals.
2425 (maybe_tuple_elements): New non-terminal, to allow empty tuples.
2426 (idtokentab): Added "up".
2428 * value.h (COERCE_VARYING_ARRAY): New macro.
2429 * valarith.c (value_subscript): Use it.
2430 * valops.c (value_cast): Likewise. Also, do nothing if already
2431 correct type, and allow converting from/to range to/from scalar.
2433 * valops.c, value.h (varying_to_slice, value_slice): New functions.
2434 * eval.c (OP_ARRAY): Add cast for array element.
2435 * expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT): New exp_opcodes.
2436 * valops.c (chill_varying_type): Moved function frp, here ...
2437 * gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here.
2438 * parse.c (length_of_subexp, prefixify_subexp): Add support
2439 for TERNOP_SLICE, TERNOP_SLICE_COUNT.
2440 * expprint.c (print_subexp, dump_expression): Likewise.
2441 * eval.c (evaluate_subexp): Likewise.
2443 * eval.c (evaluate_subexp case MULTI_SUBSCRIPT): Don't call
2444 value_x_binop on a Chill varying string.
2446 Tue Jan 31 13:51:53 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2448 * config/m68k/monitor.mt,
2449 config/pa/{hppabsd.mt,hppahpux.mt,hppaosf.mt,hppapro.mt}: Put
2450 depfiles in TDEPFILES not REMOTE_O.
2452 Tue Jan 31 11:14:44 1995 Steve Chamberlain <sac@splat>
2454 From nigel@algor.co.uk.
2455 * ser-go32.c (dos_close): Don't crash if scb null.
2456 (dos_sendbreak): New function.
2457 (dos_ops): Point to dos_sendbreak.
2458 (dos_info): Calculate COM number correctly.
2460 Tue Jan 31 09:40:11 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2462 * xcoffread.c (process_xcoff_symbol): Use new variables
2463 func_symbol_type and var_symbol_type as type of functions and
2464 variables which don't have any stabs associated with them.
2465 Reindent most of function.
2466 (_initialize_xcoffread): Initialize *_symbol_type.
2468 * xcoffread.c (read_xcoff_symtab): Reindent most of function.
2469 Put C_HIDEXT symbols in the minimal symbols, rather than ignoring
2470 them (this part commented out as I didn't quite get it to work).
2471 (cs_to_section, find_targ_sec): New functions, to support above code.
2472 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is
2475 Mon Jan 30 17:34:24 1995 Stu Grossman (grossman@cygnus.com)
2476 start-sanitize-gdbtk
2477 * gdbtk.tcl (create_file_win): Disable old popup menu for source
2480 * sparcl-tdep.c: Add `sparclite' target for doing serial and udp
2481 downloads to SPARClite demo boards.
2483 Sun Jan 29 09:43:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2485 * remote.c, remote-pa.c: Remove #if 0'd icache code. It has had
2486 no hope of working as is for a long time (in particular, shebs' 27
2487 Jan 95 change confuses the issue further--target_read_memory and
2488 xfer_core_file do *not* do the same thing in this context).
2491 Sat Jan 28 13:40:46 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2493 * elfread.c (elf_symtab_read): Do not test BSF_GLOBAL for
2494 procedure linkage table symbols, it is no longer set due to the
2495 Jan 6 BFD change in bfd/elfcode.h.
2497 Fri Jan 27 17:08:06 1995 Stan Shebs <shebs@andros.cygnus.com>
2499 * top.c (use_windows): Clarify comments.
2501 * convex-tdep.c (xfer_core_file): Comment out.
2502 * config/convex/tm-convex.h (XFER_CORE_FILE): Remove.
2503 * remote.c, remote-pa.c (remote_fetch_word): Change xfer_core_file
2504 references to target_read_memory.
2505 * gdbcore.h (xfer_core_file, core_open, core_detach): Remove
2507 * corelow.c (core_open, core_detach): Make static.
2509 * arm-tdep.c: Make it compile.
2510 (exec_file_command, xfer_core_file): Comment out.
2511 (arm_print_insn): Remove, now in libopcodes.
2512 (skip_prologue): Comment out most of body.
2513 (arm_frame_find_saved_regs): Move here from tm-arm.h.
2514 (_initialize_arm_tdep): Set tm_print_insn.
2515 * config/arm/tm-arm.h: Remove old refs to first_object_file_end.
2516 (XFER_CORE_FILE): Remove.
2517 (FRAME_FIND_SAVED_REGS): Call arm_frame_find_saved_regs.
2519 Fri Jan 27 08:48:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2521 * Makefile.in (CHILL_LIB): Define as in testsuite/Makefile.in.
2523 Thu Jan 26 18:24:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2525 * symtab.c (find_pc_line): When subtracting one to get a line
2526 number, make sure not to end up with zero.
2528 * remote-vx.c: Revert all of Kung's changes of 16 Jan. The
2529 problems with those changes were (a) the file didn't compile, (b)
2530 they changed memset to bzero--memset is correct, (c) they took out
2531 code to deal with boards lacking floating point, (d) who knows
2532 what I didn't discover in a quick read.
2534 Thu Jan 26 17:32:54 1995 Stu Grossman (grossman@cygnus.com)
2536 * sparcl-tdep.c: Clean up formatting and indentation.
2538 Thu Jan 26 10:49:59 1995 Steve Chamberlain <sac@splat>
2540 * remote-hms.c (hms_ops): Change ref of hr_load_image
2542 (dcache_flush, dcache_hit, dcache_value, dcache_fetch,
2543 dcache_poke, dcache_init): Deleted.
2544 (hms_open, hms_resume, hms_fetch_word, hms_store_word):
2545 Use dcache routines provided by remote-util.h
2547 Thu Jan 26 12:08:31 1995 Michael Meissner <meissner@cygnus.com>
2549 * configure.in: Add support for powerpc-*-eabi.
2551 * powerpc/tm-ppc-eabi.h, powerpc/pcc-eabi.mt: New files for
2554 Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
2556 * language.h (struct language_defn): New field c_style_arrays.
2557 * language.c (unknown_language_defn, auto_language_defn,
2558 local_language_defn), c-lang.c (c_language_defn, cplus_language_defn,
2559 asm_language_defn): Set c_style_arrays to true.
2560 * m2-lang.c (m2_language_defn), ch-lang.c (chill_language_defn),
2561 f-lang.c (f_language_defn): Set c_style_arrays to false.
2562 * valops.c (value_string): If c_style_array is not set,
2563 allocate string in gdb (not inferior) using allocate_value.
2565 * value.h (COERCE_ARRAY), valops.c (value_addr, value_arg_coerce):
2566 Only call value_coerce_array if current_language->c_style_arrays.
2567 * values.c: Add #include "language.h". (Needed for COERCE_ARRAY.)
2569 * valops.c (chill_varying_type): New predicate.
2570 * valops.c (value_cast): Support assigning a fixed string or array
2571 to a variable string/array structure.
2573 * valarith.c (value_subscripted_rvalue): Extra parameter lowerbound.
2574 Check index>=lowerbound, and then add lowerbound to index here,
2575 instead of in caller. Generalize to arbitrary lval_types.
2576 (value_subscript): Use enhanced value_subscripted_rvalue if
2577 c_style_arrays is false (and index is in range).
2579 start-sanitize-gdbtk
2580 Wed Jan 25 18:23:46 1995 Stu Grossman (grossman@cygnus.com)
2582 * gdbtk.c (gdbtk_init): Prevent segfault when gdbtk.tcl can't be
2584 * gdbtk.tcl: Initialize expr_update_list() to prevent errors when
2585 popping up expression window for the first time.
2588 Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
2590 * eval.c (evaluate_subexp case OP_ARRAY): Fix calls to memset:
2591 TYPE_LENGTH is length in bytes, not bits.
2593 Wed Jan 25 08:19:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2595 * infrun.c (proceed): Flush stdout before resuming inferior.
2596 * infcmd.c (step_1), annotate.c (annotate_starting):
2597 Don't bother to flush here.
2599 Wed Jan 25 01:11:21 1995 Jeff Law (law@snake.cs.utah.edu)
2601 * hpread.c (hpread_process_one_debug_symbol): Fix lines garbled
2602 by an ill-advised global search and replace.
2604 Tue Jan 24 12:10:28 1995 Stu Grossman (grossman@cygnus.com)
2606 * gdbtk.tcl (create_registers_window): Work around a radiobutton
2607 widget bug to make Options|Natural button work.
2609 * gdbtk.c (gdb_disassemble): Fix problem with source+assembly and
2610 g++ caused by out-of-order pc's.
2611 * gdbtk.tcl (files_command): Remove duplicate file names. Also,
2614 Mon Jan 23 17:21:09 1995 Stu Grossman (grossman@cygnus.com)
2616 * gdbtk.tcl: Take .gdbtkinit if it exists. Makes gdbtk match the
2619 Mon Jan 23 13:11:46 1995 Per Bothner <bothner@kalessin.cygnus.com>
2621 Add support for Chill bitstring literals (e.h. H'FF00').
2622 * ch-exp.y (match_bitstring_literal): Fix for proper endianness.
2623 * expprint.c (print_subexp): Don't call error on OP_BITSTRING,
2624 just print B'<unimlemented>'.
2625 * gdbtypes.c (create_set_type): Fix bug in length calculation.
2626 * valops.c, value.h (value_bitstring): New function.
2627 * eval.c (evaluate_subexp): Implement support for OP_BITSTRING.
2629 * ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC,
2630 check that return type is non-void, and print in proper Chill syntax.
2632 Mon Jan 23 12:20:34 1995 Rob Savoye <rob@darkstar.cygnus.com>
2634 * Makefile.in: Remove references to remote-mon.c.
2635 * remote-mon.c: remove. Replaced by rom68k-rom.c.
2636 * rom68k-rom.c: Support for Rom68k monitor.
2638 Mon Jan 23 10:50:57 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2640 * Makefile.in (CHILL_FOR_TARGET): Update -L argument to point to
2641 gcc/ch/runtime not chillrt, since that is where the chill runtime
2644 Mon Jan 23 00:06:57 1995 Steve Chamberlain <sac@splat>
2646 * remote-hms.c (hms_load): Delete.
2647 (target_ops): Use hr_load_image.
2649 * remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops):
2650 Define memory_insert/remove_breakpoint.
2651 * xm-go32.h: Remove redundant SIGs.
2653 Thu Jan 19 20:26:58 1995 Steve Chamberlain <sac@splat>
2655 * ser-go32.c: Rewritten by nigel@algor.co.uk.
2657 Fri Jan 20 15:23:55 1995 Per Bothner <bothner@kalessin.cygnus.com>
2659 * expression.h (OP_LABELED): New operator, for Chill
2660 labeled structre tuples.
2661 * ch-exp.y (tuple_element, named_record_element, tuple_elements):
2662 New non-terminals, to handle labeled structure tuples.
2663 (tuple): Re-define using tuple_elements.
2664 * eval.c (evaluate_labeled_field_init): New function, to handle
2665 initialization of structure fields, possibly using OP_LABELED.
2666 (evaluate_subexp): Use it.
2667 * expprint.c (print_subexp case): For OP_ARRAY, use Chill syntax
2668 for Chill. Handled OP_LABELED.
2669 * parse.c (length_of_subexp, prefixify_subexp): Handle OP_LABELED.
2671 * eval.c (evaluate_subexp): Handle Chill Powerset tuples.
2672 * valarith.c (value_bit_index): Just treat bitstring as represented
2673 by an array of bytes. Alignment is handled by compiler.
2675 Wed Jan 18 19:00:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2677 * h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info).
2678 * sh-tdep.c (gdb_print_insn_sh): Ditto.
2680 Wed Jan 18 11:25:43 1995 Kung Hsu <kung@mexican.cygnus.com>
2682 * remote-os9k.c (rombug_open): Fix a bug in exception handling
2684 * remote-os9k.c (rombug_write_inferior_memory): reset buffer after
2687 Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
2689 * parse.c (_initialize_parse): Improve wording of names of
2692 Tue Jan 17 14:00:58 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2694 * config/mips/tm-mips.h (enum mips_fpu_type): New enum.
2695 (mips_fpu): Change type to enum mips_fpu_type.
2696 (FIX_CALL_DUMMY): Handle mips_fpu == MIPS_FPU_SINGLE.
2697 * mips-tdep.c (mips_fpu): Change type to enum mips_fpu_type.
2699 (mips_fpu_string): New static variable.
2700 (mips_push_dummy_frame): Handle mips_fpu == MIPS_FPU_SINGLE.
2701 (mips_pop_frame): Likewise.
2702 (mips_extract_return_value): Likewise.
2703 (mips_store_return_value): Likewise.
2704 (mips_set_fpu_command): New static function.
2705 (mips_show_fpu_command): New static function.
2706 (_initialize_mips_tdep): Change handling of set/show mipsfpu.
2708 Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
2710 * a29k-tdep.c (gdb_print_insn_a29k): Fix typo (&info -> info).
2712 * parse.c (write_exp_msymbol): Use new variables
2713 msym_*_symbol_type as type of msymbol expression.
2714 (_initialize_parse): Initialize them.
2716 Mon Jan 16 18:11:03 1995 Stan Shebs <shebs@andros.cygnus.com>
2718 General cleanup and simplication of disassembler interface.
2719 * a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c,
2720 hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c,
2721 m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c,
2722 rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove.
2723 * gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files,
2724 had been -pinsn.c files.
2725 * Makefile.in (ALLDEPFILES): Remove removed files.
2726 (a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o,
2727 hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o,
2728 m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o,
2729 rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o):
2730 Remove compile actions.
2731 * arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o,
2732 vax-tdep.o: Add compile actions.
2733 * defs.h (tm_print_insn): New global.
2734 * a29k-tdep.c (gdb_print_insn_a29k): New function.
2735 (_initialize_a29k_tdep): Rename from _initialize_29k,
2737 * alpha-tdep.c (print_insn): Remove.
2738 (_initialize_alpha_tdep): Set tm_print_insn.
2739 * arm-tdep.c (arm_print_insn): New function, was print_insn
2741 * convex-tdep.c (convex_print_insn): New function, was print_insn
2743 * h8300-tdep.c (print_insn): Remove.
2744 (gdb_print_insn_h8300): New function.
2745 (_initialize_h8300_tdep): New function.
2746 * h8500-tdep.c (print_insn): Remove.
2747 (_initialize_h8500_tdep): New function.
2748 * hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn.
2749 * i386-tdep.c (_initialize_i386_tdep): New function.
2750 * i960-tdep.c (mem, next_insn): New functions, were in
2752 (_initialize_i960_tdep): Set tm_print_insn.
2753 * m68k-tdep.c (_initialize_m68k_tdep): New function.
2754 * m88k-tdep.c (_initialize_m88k_tdep): New function.
2755 * mips-tdep.c (gdb_print_insn_mips): New function.
2756 (_initialize_mips_tdep): Set tm_print_insn.
2757 * pyr-tdep.c (pyr_print_insn): New function, was print_insn
2759 * rs6000-tdep.c (_initialize_rs6000_tdep): New function.
2760 * sh-tdep.c (print_insn): Remove.
2761 (gdb_print_insn_sh): New function.
2762 (_initialize_sh_tdep): Set tm_print_insn.
2763 * sparc-tdep.c (_initialize_sparc_tdep): New function.
2764 * w65-tdep.c (print_insn): Remove.
2765 (_initialize_w65_tdep): New function.
2766 * z8k-tdep.c (print_insn): Remove.
2767 (gdb_print_insn_z8k): New function.
2768 (_initialize_z8k_tdep): Set tm_print_insn.
2769 * printcmd.c (print_insn): New function, generic disassembler.
2770 * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o.
2772 Mon Jan 16 15:43:29 1995 Kung Hsu <kung@mexican.cygnus.com>
2774 * Makefile.in: add new files remote-vx29k.c, config/a29k/tm-vx29k.h,
2775 and config/a29k/vx29k.mt.
2776 * configure.in: add new configuration a29k-*-vxworks.
2777 * remote-vx29k.c: new file merged from WRS.
2778 * remote-vx.c: merge changes from WRS.
2779 * config/a29k/vx29k.mt: new file for new configuration.
2780 * config/a29k/tm-vx29k.h: new header file for newconfiguration.
2782 Sun Jan 15 14:36:19 1995 Steve Chamberlain <sac@splat>
2784 * breakpoint.h (disable_breakpoint, enable_breakpoint):
2786 (enum bpdisp): Change name of 'delete' member to 'del'.
2787 (struct bpstat): Changed name to 'bpstats'.
2788 * breakpoint.c (disable_breakpoint, enable_breakpoint,
2789 breakpoint_chain): Made globally visible.
2790 (bpstat_stop_status): Use new name for bpstat.
2791 (break_command_1, watch_command_1, catch_command_1,
2792 breakpoint_auto_delete, denable_delete_breakpoint): Use 'del'
2793 instead of 'delete'.
2794 (set_breakpoint_sal): New function.
2795 * defs.h (registers_changed_hook): New declaration.
2796 * infcmd.c (run_stack_dummy): 'delete' is now 'del'.
2797 * inflow.c (new_tty): Treat WIN32 in same way as __GO32__
2798 * main.c (main): Don't scan options when in WIN32 and exit
2799 without entering main loop.
2800 * m2-exp.y (m2_elx): Member 'class' is now 'aclass'.
2801 * symtab.h (struct symbol, struct partial_symbol): Changed name of
2802 member 'class' to 'aclass'.
2803 (SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change.
2804 * top.c (registers_changed_hook): New definition.
2805 * utils.c (quit, notice_quit, initialize_utils): Treate WIN32
2806 in same way as __GO32__.
2807 * value.h (c_typedef_print): Rename 'new' argument.
2809 * w65-tdep.c, config/tm-w65.h, config/w65.mt: New files.
2810 * configure.in: Suppprt for w65,
2813 Sat Jan 14 11:18:11 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
2815 * infcmd.c (signal_command): For "signal 0", pass (CORE_ADDR)-1,
2816 not stop_pc, to proceed.
2818 * eval.c (evaluate_subexp): Clear expect_type except for C++ and CHILL.
2820 Fri Jan 13 17:52:57 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
2822 * infcmd.c (signal_command): Accept "signal 0"; the change to not
2823 accept it was accidental. "handle 0" and "info signal 0" remain
2826 Fri Jan 13 15:19:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2828 * Makefile.in (all): Don't make libgdb-files.
2829 (libgdb): New action, makes libgdb-files.
2831 Thu Jan 12 21:23:25 1995 Per Bothner <bothner@kalessin.cygnus.com>
2833 * stabsread.c (read_enum_type): When pending enum symbols are
2834 put into the enum type, they must be inserted in "backwards
2835 order, in case we've overflowed a struct pending buffer.
2837 start-sanitize-gdbtk
2838 Thu Jan 12 15:02:40 1995 Stu Grossman (grossman@cygnus.com)
2840 * gdbtk.c, gdbtk.tcl: Update/add copyright.
2841 * gdbtk.tcl (build_framework): Several fixes for filespec widget,
2842 including dismiss button, and better error handling.
2843 * (create_command_win): Bind button 2 to retrieve selection.
2846 Thu Jan 12 09:33:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2848 * README: Add note about SPARCworks cc release 3.0 and higher.
2850 Add procfs support for Alpha OSF/1-2.x.
2851 * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic
2852 OSF/1 native support.
2853 * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly.
2854 (MUNCH_DEFINE): Removed.
2855 * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files
2857 * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1
2858 release 2.x and higher, else alpha-osf1.mh, as the procfs support
2859 in release 1.x is incomplete.
2860 * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh.
2861 * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
2862 fill_fpgregset): New routines for procfs support.
2863 * inftarg.c (_initialize_inftarg): Don't add ptrace support
2864 if we have an optional procfs and /proc is accessible.
2865 * procfs.c: Include sys/fault.h and sys/syscall.h before
2866 including sys/procfs.h.
2867 (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL
2868 is defined, additionally perform a PIOCSSIG to really terminate
2870 (create_procinfo): Always return a result.
2871 (create_procinfo, do_attach): Don't trace T_IFAULT faults if
2872 PROCFS_DONT_TRACE_IFAULT is defined.
2873 (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as
2874 argument to startup_inferior if it is defined.
2875 (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead
2876 of tracing exits from exec system calls. Needed for the user level
2877 loader under Alpha OSF/1.
2878 (do_detach): Clear any pending signal if we want to detach from
2879 a process without a signal.
2880 (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
2881 don't issue a PIOCSSIG if pr_cursig already contains the signal we
2883 (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the
2884 pending signals are numbered from 1 instead of 0.
2885 (info_proc_mappings): Increase size of output format for addresses
2886 if BFD_HOST_64_BIT is defined.
2887 (procfs_stop): Renamed from child_stop.
2888 (_initialize_procfs): Don't add procfs support if we have an
2889 optional procfs and /proc is not accessible.
2891 start-sanitize-gdbtk
2892 Wed Jan 11 17:06:55 1995 Stu Grossman (grossman@cygnus.com)
2894 * gdbtk.tcl: Add button to control mixed source disassembly.
2895 Use text widgets in expr window. The give me more control over
2897 Add auto-updating of exprs in expression window.
2898 Handle expressions out of scope a bit better.
2899 Make selected window pop up to the top when invoked via the
2901 Make copyright message have raised relief.
2903 * gdbtk.c (gdbtk_init): Improve handling for errors in gdbtk.tcl
2907 Wed Jan 11 17:53:26 1995 Rob Savoye <rob@darkstar.cygnus.com>
2909 * array-rom.c: Add support for most commands.
2911 * monitor.c: Add GDB remote protocol for the hybrid environment on
2914 Wed Jan 11 00:44:01 1995 Jeff Law (law@snake.cs.utah.edu)
2916 * command.c (show_user_1): Use print_command_line to show a user
2917 defined command (including control structures).
2919 * top.c (init_main): Change documentation for user defined
2920 commands to indicate they may accept up to ten arguments.
2922 Tue Jan 10 16:22:41 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
2924 * mips-tdep.c (mips_skip_prologue): Accept or as well as addu for
2925 `move $s8, $sp' instruction.
2927 Sun Jan 8 12:45:34 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2929 * target.c, target.h (target_signal_from_command): New function.
2930 * infrun.c (handle_command, signals_info), infcmd.c
2931 (signal_command): Use it.
2932 * infrun.c, infcmd.c: Update docstrings for these commands.
2934 * target.h (enum target_signal), target.c (signals), target.c
2935 (target_signal_from_host, target_signal_to_host): Add
2936 TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx.
2937 * config/tm-lynx.h: Define signal numbers for realtime events.
2939 Sat Jan 7 07:23:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2941 * dbxread.c (process_one_symbol): Handle N_FUN symbols
2942 for Sun acc 3.0 under SunOS4.
2944 Changes to improve handling of runtime common symbols
2946 * minsyms.c (get_symbol_leading_char): New routine to determine
2947 the leading symbol character for an objfile.
2948 (prim_record_minimal_symbol_and_info, install_minimal_symbols):
2950 * objfiles.h (rt_common_objfile): New global, points to objfile
2951 containing the runtime common minimal symbols.
2952 * objfiles.c (free_objfile): Mark rt_common_objfile as
2953 unallocated before freeing it.
2954 * solib.c (allocate_rt_common_objfile): New routine to allocate
2955 an objfile for the runtime common minimal symbols.
2956 (solib_add_common_symbols): Allocate an objfile for the runtime
2957 common symbols if necessary and put common symbols into it.
2958 Clean up code and comments.
2959 (solib_add, special_symbol_handling): Cleanup comments regarding
2960 runtime common symbols.
2961 * stabsread.c (scan_file_globals_1): New routine, contains
2962 old scan_file_globals code. Checks if there are any unresolved
2963 global symbols before starting the expensive minimal symbol table
2965 (scan_file_globals): Now calls scan_file_globals_1 for the passed
2966 objfile and eventually for the runtime common objfile. Complains
2967 about any unresolved global symbols and removes them from the
2968 global symbol chain to avoid dangling pointers into the symbol
2969 table if the symbol table is reread.
2971 Thu Jan 5 17:38:29 1995 Stu Grossman (grossman@cygnus.com)
2973 * Makefile.in (install_only uninstall): Indent for clarity.
2975 * core.c (dis_asm_read_memory): Add call to
2976 dis_asm_read_memory_hook to provide alternate way for disassembler
2979 * defs.h: Protect from multiple inclusion. Add decl for
2980 dis_asm_read_memory_hook.
2982 * top.c: Make window startup be the default.
2983 * Add dis_asm_read_memory_hook.
2985 start-sanitize-gdbtk
2986 * gdbtk.c (finish_saving_output): Don't do anything if not saving
2988 * (breakpoint_notify): Don't send null filename to tcl.
2989 * (gdb_eval): New tcl command to eval an expression.
2990 * (gdb_disassemble): New tcl command to do disassembly. This
2991 allows tcl code to choose between exec file and target memeory,
2992 and can also do mixed source and assembly.
2993 * (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure
2994 that more of the environment is set up. Also, create link between
2995 gdb and tcl vars disassemble{-_}from{-_}exec.
2997 * gdbtk.tcl: New expression window support.
2998 * Make assembly window be 80 columns wide.
2999 * Use new disassembly method. Add menu items to select
3000 disassembly from exec file or target.
3001 * Change View menubar item to Options.
3003 * Get rid of Stack, Breakpoints, Signals, and Variables Windows,
3004 since they don't exist yet.
3006 * Pop up a copyright window on startup.
3009 Thu Jan 5 01:16:40 1995 Jeff Law (law@snake.cs.utah.edu)
3011 * stabsread.c (define_symbol): Handle `a' symbol type used for
3012 reference parameter passed in a register.
3014 start-sanitize-gdbtk
3015 Wed Jan 4 19:49:10 1995 Stan Shebs <shebs@andros.cygnus.com>
3017 * gdbtk.tcl (build_framework): Add standard commands menu, more
3018 windows to standard windows menu.
3019 (not_implemented_yet): Clarify message.
3022 Wed Jan 4 12:27:29 1995 Kung Hsu <kung@mexican.cygnus.com>
3024 * defs.h: move include tm.h up, so that the type LONGEST can
3025 also based on the target requirement to determine. In this case
3028 * remote-os9k.c (rombug_open): catch exception e in rombug.
3029 * remote-os9k.c (rombug_wait): print message before register display
3032 Wed Jan 4 09:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
3034 * top.c (locate_arg): Call strchr not index.
3036 Tue Jan 3 16:52:03 1995 Per Bothner <bothner@kalessin.cygnus.com>
3038 * ch-exp.y (literal): Recognize NULL.
3039 (tuple): Parse simple unlabelled tuples.
3040 * eval.c (evaluate_subexp case OP_ARRAY): Use expect_type to
3041 evaluate brace-initializer-expressions depending on context.
3042 (evaluate_subexp case UNOP_CAST): Pass the target type as
3043 expected type when evaluating the expression.
3045 * ch-typeprint.c (chill_type_print_base): Get names of PTR and
3046 BOOL from TYPE_NAME.
3047 * ch-valprint.c (chill_print_type_scalar): New function, to handle
3048 TYPE_CODE_RANGE better than print_type_scalar does.
3049 (chill_val_print_array_elements): Use above new function.
3051 Mon Jan 2 15:02:51 1995 Stan Shebs <shebs@andros.cygnus.com>
3053 * remote-udi.c (udi_load): Tell symbol_file_add that the
3054 program being loaded is the main program.
3056 For older changes see ChangeLog-94
3062 version-control: never