1 2013-11-17 Joel Brobecker <brobecker@adacore.com>
3 * dwarf2expr.h (struct dwarf_expr_context_funcs)
4 <read_addr_from_reg>: Renames "read_reg".
5 * dwarf2-frame.c (read_addr_from_reg): Renames "read_reg".
7 (dwarf2_frame_ctx_funcs, execute_stack_op, dwarf2_frame_cache):
8 Use read_addr_from_reg in place of read_reg.
9 * dwarf2expr.c (execute_stack_op): Use read_addr_from_reg
11 * dwarf2loc.c (dwarf_expr_read_addr_from_reg): Renames
13 (dwarf_expr_ctx_funcs): Replace dwarf_expr_read_reg
14 with dwarf_expr_read_addr_from_reg.
15 (needs_frame_read_addr_from_reg): Renames needs_frame_read_reg.
16 (needs_frame_ctx_funcs): Replace needs_frame_read_reg with
17 needs_frame_read_addr_from_reg.
19 2013-11-15 Jan Kratochvil <jan.kratochvil@redhat.com>
21 * NEWS (Changes in GDB 7.5) (New commands) (explore): Fix typo.
23 2013-11-15 Andreas Arnez <arnez@linux.vnet.ibm.com>
25 * dwarf2loc.c (chain_candidate): Prevent invoking memcpy with
28 2013-11-15 Tom Tromey <tromey@redhat.com>
31 * c-exp.y (lex_one_token): Add "is_quoted_name" argument.
32 (classify_name): Likewise. Prefer a field of "this" over a
34 (classify_inner_name, yylex): Update.
36 2013-11-15 Joel Brobecker <brobecker@adacore.com>
38 * dwarf2expr.h (struct dwarf_expr_context_funcs) <read_reg>:
39 Extend the documentation a bit.
40 <get_reg_value>: New field.
41 * dwarf2loc.c (dwarf_expr_get_reg_value)
42 (needs_frame_get_reg_value): New functions.
43 (dwarf_expr_ctx_funcs, needs_frame_ctx_funcs): Add "get_reg_value"
45 * dwarf2-frame.c (get_reg_value): New function.
46 (dwarf2_frame_ctx_funcs): Add "get_reg_value" callback.
47 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_regval_type>:
48 Use new callback to compute result_val.
50 2013-11-15 Alan Modra <amodra@gmail.com>
52 * ppc64-tdep.c (ppc64_plt_entry_point): Renamed from..
53 (ppc64_desc_entry_point): ..this. Update comments here and at
55 (ppc64_standard_linkage1, ppc64_standard_linkage2,
56 ppc64_standard_linkage3): Update comments.
57 (ppc64_standard_linkage4, ppc64_standard_linkage5,
58 (ppc64_standard_linkage6, ppc64_standard_linkage7): New insn
60 (ppc64_standard_linkage4_target): New function.
61 (ppc64_skip_trampoline_code): Skip ELFv2 patterns too.
62 * rs6000-tdep.c (skip_prologue): Skip ELFv2 r2 setup. Correct
63 nop match. Fix comment wrap.
65 2013-11-14 Pedro Alves <palves@redhat.com>
67 * infrun.c (handle_signal_stop): Move STOP_QUIETLY,
68 STOP_QUIETLY_REMOTE and 'stop_after_trap' handling earlier.
70 2013-11-14 Pedro Alves <palves@redhat.com>
72 * infrun.c (struct execution_control_state)
73 <stepped_after_stopped_by_watchpoint>: New field.
74 (get_inferior_stop_soon): New function.
75 (handle_inferior_event): 'stepped_after_stopped_by_watchpoint' was
76 moved to struct execution_control_state -- adjust. Use
77 get_inferior_stop_soon. Split TARGET_WAITKIND_STOPPED handling to
79 (handle_signal_stop): New function, factored out from
80 handle_inferior_event.
82 2013-11-14 Pedro Alves <palves@redhat.com>
84 * break-catch-sig.c (signal_catchpoint_explains_signal): Adjust to
86 * breakpoint.c (bpstat_explains_signal): Adjust to return a
88 (explains_signal_watchpoint, base_breakpoint_explains_signal):
89 Adjust to return a boolean.
90 * breakpoint.h (enum bpstat_signal_value): Delete.
91 (struct breakpoint_ops) <explains_signal>: New returns a boolean.
92 (bpstat_explains_signal): Likewise.
93 * infrun.c (handle_inferior_event) <random signal checks>:
94 bpstat_explains_signal now returns a boolean - adjust. No longer
95 consider hiding signals.
97 2013-11-14 Pedro Alves <palves@redhat.com>
99 * breakpoint.c (bpstat_explains_signal) <Moribund locations>:
100 Return BPSTAT_SIGNAL_PASS instead of BPSTAT_SIGNAL_HIDE.
101 (explains_signal_watchpoint): Return BPSTAT_SIGNAL_PASS instead of
103 (base_breakpoint_explains_signal): Return BPSTAT_SIGNAL_PASS
104 instead of BPSTAT_SIGNAL_HIDE.
105 * infrun.c (handle_inferior_event): Rework random signal checks.
107 2013-11-14 Pedro Alves <palves@redhat.com>
109 * infrun.c (struct execution_control_state): Remove
110 'random_signal' field.
111 (handle_syscall_event): Use bpstat_causes_stop instead of
112 bpstat_explains_signal. Don't set ecs->random_signal.
113 (handle_inferior_event): New 'random_signal' local.
114 <TARGET_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED,
115 TARGET_WAITKIND_EXECD>: Use bpstat_causes_stop instead of
116 bpstat_explains_signal. Don't set ecs->random_signal.
117 <TARGET_WAITKIND_STOPPED>: Adjust to use local instead of
120 2013-11-14 Pedro Alves <palves@redhat.com>
122 * infrun.c (handle_inferior_event): Move comment from the
123 function's body to the function's description, adjusted.
125 2013-11-14 Pedro Alves <palves@redhat.com>
127 * infrun.c (handle_inferior_event) <TARGET_WAITKIND_LOADED>:
128 Handle STOP_QUIETLY_NO_SIGSTOP and STOP_QUIETLY_REMOTE here.
129 Assert we never fall through out of the TARGET_WAITKIND_LOADED
132 2013-11-14 Tom Tromey <tromey@redhat.com>
134 * python/py-linetable.c (ltpy_has_line)
135 (ltpy_get_all_source_lines): Fix loop termination condition.
137 2013-11-14 Joel Brobecker <brobecker@adacore.com>
139 * mi/mi-parse.h (struct mi_parse) <language>: New field.
140 * mi/mi-main.c (mi_cmd_execute): Temporarily set language to
141 PARSE->LANGUAGE during command execution, if set.
142 * mi/mi-parse.c: Add "language.h" #include.
143 (mi_parse): Add parsing of "--language" command option.
145 * NEWS: Add entry mentioning the new "--language" command option.
147 2013-11-14 Pedro Alves <palves@redhat.com>
148 Joel Brobecker <brobecker@adacore.com>
150 * cli/cli-utils.h (extract_arg_const): Add declaration.
151 * cli/cli-utils.c (extract_arg_const): New function.
152 (extract_arg): Reimplement using extract_arg_const.
154 2013-11-14 Joel Brobecker <brobecker@adacore.com>
156 * language.h: Add "symtab.h" #include.
158 2013-11-13 Doug Evans <xdje42@gmail.com>
160 * breakpoint.c (bpstat_check_breakpoint_conditions): For thread
161 specific breakpoints, don't evaluate breakpoint condition if
164 2013-11-13 Keith Seitz <keiths@redhat.com>
168 * cp-support.c (insepct_type): Add support for substituting
169 namespace aliases, too.
170 * dwarf2read.c (scan_partial_symbols): Add a partial symbol
171 for DW_TAG_imported_declaration.
172 (add_partial_symbol): Likewise.
173 (process_die): Handle namespace aliases with
174 read_namespace_alias.
175 (die_needs_namespace): Add DW_TAG_imported_declaration.
176 (read_namespace_alias): New function.
177 (load_partial_dies): Load DW_TAG_imported_declaration, too.
178 (new_symbol_full): Handle DW_TAG_imported_declaration.
180 2013-11-13 Keith Seitz <keiths@redhat.com>
182 * p-exp.y (uptok): Make first parameter const.
183 (yylex): Make `tokstart' and `tokptr' const.
184 Don't copy the lexer input to a temporary buffer.
186 Remove const workaround for parse_escape.
187 Create a temporary buffer for a convenience variable instead
188 of doing in-place modification of the input.
189 If a match is found with a different case from the input,
190 do not change the input at all.
191 Use `tmp' to construct the resultant stoken instead of
194 2013-11-13 Doug Evans <xdje42@gmail.com>
196 * breakpoint.c (breakpoint_cond_eval): Fix and enhance comment.
198 2013-11-13 Joel Brobecker <brobecker@adacore.com>
200 * mi/mi-main.c (mi_cmd_list_features): Replace "info-ada-exceptions"
201 entry with "ada-exceptions".
203 2013-11-13 Joel Brobecker <brobecker@adacore.com>
205 * symfile.c (reread_symbols): Move call to set_objfile_per_bfd
206 after re-initialization of OBJFILE's obstack.
208 2013-11-12 Doug Evans <xdje42@gmail.com>
210 * breakpoint.c (bpstat_check_breakpoint_conditions): Assert
211 bs->stop != 0 on entry. Update function comment. Simplify early
212 exit for frame mismatch. Reindent rest of function.
214 2013-11-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
216 * objc-lang.c (uniquify_strings): Prevent invoking qsort with
219 2013-11-12 Doug Evans <dje@google.com>
221 Work around gold/15646.
222 * dwarf2read.c (read_index_from_section): Update comment.
223 (struct dw2_symtab_iterator): New member global_seen.
224 (dw2_symtab_iter_init): Initialize it.
225 (dw2_symtab_iter_next): Skip duplicate global symbols.
226 (dw2_expand_symtabs_matching): Ditto.
228 2013-11-12 Joel Brobecker <brobecker@adacore.com>
230 * mi/mi-cmds.h (mi_cmd_info_ada_exceptions): Add declaration.
231 * mi/mi-cmds.c (mi_cmds): Add entry for -info-ada-exceptions
233 * mi/mi-cmd-info.c: #include "ada-lang.c" and "arch-utils.c".
234 (mi_cmd_info_ada_exceptions): New function.
235 * mi/mi-main.c (mi_cmd_list_features): Add "info-ada-exceptions".
237 2013-11-12 Joel Brobecker <brobecker@adacore.com>
239 * ada-lang.h: #include "vec.h".
240 (struct ada_exc_info): New.
241 (ada_exc_info): New typedef.
242 (DEF_VEC_O(ada_exc_info)): New vector.
243 (ada_exceptions_list): Add declaration.
244 * ada-lang.c (ada_is_exception_sym)
245 (ada_is_non_standard_exception_sym, compare_ada_exception_info)
246 (sort_remove_dups_ada_exceptions_list)
247 (ada_exc_search_name_matches, ada_add_standard_exceptions)
248 (ada_add_exceptions_from_frame, ada_add_global_exceptions)
249 (ada_exceptions_list_1, ada_exceptions_list)
250 (info_exceptions_command): New function.
251 (_initialize_ada_language): Add "info exception" command.
253 2013-11-11 Phil Muldoon <pmuldoon@redhat.com>
256 * NEWS: Add linetable feature.
257 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-linetable entries.
258 * python/py-linetable.c: New file.
259 * python/py-symtab.c (stpy_get_linetable): New function.
260 * python/python-internal.h (symtab_to_linetable_object): Declare.
261 (gdbpy_initialize_linetable): Ditto.
262 * python/python.c (_initialize_python): Call
263 gdbpy_initialize_linetable.
265 2013-11-11 Joel Brobecker <brobecker@adacore.com>
267 * ada-lang.c (create_ada_exception_catchpoint): Enhance
268 the documentation of fields "except_string" and "condition".
269 * mi/mi-cmd-catch.c (mi_cmd_catch_assert): Reallocate
270 CONDITION on the heap before passing it to
271 create_ada_exception_catchpoint.
272 (mi_cmd_catch_exception): Likewise for EXCEPTION_NAME and
275 2013-11-11 Tom Tromey <tromey@redhat.com>
277 * config.in, configure: Rebuild.
278 * configure.ac (HAVE_TKILL_SYSCALL): Check for "syscall".
280 2013-11-11 Joel Brobecker <brobecker@adacore.com>
282 * remote-sim.c (gdbsim_detach): Break declaration into
283 shorter lines. No code change.
285 2013-11-11 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
287 * remote-sim.c (gdbsim_detach): Fix prototype.
289 2013-11-08 Doug Evans <dje@google.com>
291 * dwarf2read.c (dwarf2_read_debug): Change to unsigned int.
292 (create_debug_types_hash_table): Only print debugging messages for
293 each TU if dwarf2-read >= 2.
294 (process_queue): Ditto.
295 (_initialize_dwarf2_read): Make "set debug dwarf2-read" a zuinteger.
298 2013-11-08 Tom Tromey <tromey@redhat.com>
300 * configure: Rebuild.
301 * configure.ac: Remove mentions of HAVE_MULTIPLE_PROC_FDS.
303 2013-11-08 Tom Tromey <tromey@redhat.com>
305 * configure, config.in: Rebuild.
306 * configure.ac: Remove unused configury.
308 2013-11-08 Tom Tromey <tromey@redhat.com>
310 * m32c-tdep.c: Use gdb_string.h.
312 2013-11-08 Tom Tromey <tromey@redhat.com>
314 * configure, config.in: Rebuild.
315 * configure.ac: Remove all link.h-related checks.
317 2013-11-08 Tom Tromey <tromey@redhat.com>
319 * acinclude.m4: Include common.m4.
320 * common/common.m4: New file.
321 * configure, config.in: Rebuild.
322 * configure.ac: Use GDB_AC_COMMON.
324 2013-11-08 Doug Evans <dje@google.com>
326 * NEWS: Mention that "set debug symtab-create" now accepts a
328 * buildsym.c (end_symtab_from_static_block): Call set_symtab_primary
329 to set the symtab's primary flag.
330 * jit.c (finalize_symtab): Ditto.
331 * mdebugread.c (psymtab_to_symtab_1): Ditto.
332 * symfile.c (allocate_symtab): Only print debugging messages for
333 symtab_create_debug levels 2 and higher.
334 * symtab.c (symtab_create_debug): Change type to unsigned int.
335 (set_symtab_primary): New function.
336 (_initialize_symtab): Change "set debug symtab-create" to a
338 * symtab.h (set_symtab_primary): Declare.
339 (symtab_create_debug): Update decl.
341 2013-11-08 Tom Tromey <tromey@redhat.com>
343 * aix-thread.c (aix_thread_detach): Update.
344 * corelow.c (core_detach): Update.
345 * darwin-nat.c (darwin_detach): Update.
346 * dec-thread.c (dec_thread_detach): Update.
347 * gnu-nat.c (gnu_detach): Update.
348 * go32-nat.c (go32_detach): Update.
349 * inf-ptrace.c (inf_ptrace_detach): Update.
350 * inf-ttrace.c (inf_ttrace_detach): Update.
351 * linux-fork.c (linux_fork_detach): Update.
352 * linux-fork.h (linux_fork_detach): Update.
353 * linux-nat.c (linux_nat_detach): Update. Introduce "tem"
354 local for const-correctness.
355 * linux-thread-db.c (thread_db_detach): Update.
356 * monitor.c (monitor_detach): Update.
357 * nto-procfs.c (procfs_detach): Update.
358 * procfs.c (procfs_detach): Update.
359 * record.c (record_detach): Update.
360 * record.h (record_detach): Update.
361 * remote-m32r-sdi.c (m32r_detach): Update.
362 * remote-mips.c (mips_detach): Update.
363 * remote-sim.c (gdbsim_detach): Update.
364 * remote.c (remote_detach_1, remote_detach)
365 (extended_remote_detach): Update.
366 * sol-thread.c (sol_thread_detach): Update.
367 * target.c (target_detach): Make "args" const.
368 (init_dummy_target): Update.
369 * target.h (struct target_ops) <to_detach>: Make argument const.
370 (target_detach): Likewise.
371 * windows-nat.c (windows_detach): Update.
373 2013-11-07 Doug Evans <dje@google.com>
376 * solib-svr4.c (svr4_exec_displacement): Ignore filesz, memsz, flags
377 and align fields for PT_GNU_RELRO segments.
379 2013-11-07 Phil Muldoon <pmuldoon@redhat.com>
382 * python/py-cmd.c: Add COMPLETE_EXPRESSION constant.
384 2013-11-07 Phil Muldoon <pmuldoon@redhat.com>
386 * NEWS: Document Python temporary breakpoint support.
387 * python/py-breakpoint.c (bppy_get_temporary): New function.
388 (bppy_init): New keyword: temporary. Parse it and set breakpoint
389 to temporary if True.
391 2013-11-07 Jose E. Marchesi <jose.marchesi@oracle.com>
393 * sparc-tdep.c (sparc_analyze_control_transfer): Assertion
394 removed to allow analyzing unconditional branch instructions
395 with PC-relative offsets of zero.
397 2013-11-07 Yao Qi <yao@codesourcery.com>
399 * mi/mi-cmd-var.c: Include "language.h".
400 (mi_cmd_var_info_expression): Get language name from
402 * varobj.c (varobj_language_string): Remove.
403 (variable_language): Remove declaration.
405 (varobj_get_language): Change the type of return value.
406 (variable_language): Remove.
407 * varobj.h (enum varobj_languages): Remove.
408 (varobj_language_string): Remove declaration.
409 (varobj_get_language): Update declaration.
411 2013-11-07 Yao Qi <yao@codesourcery.com>
413 * language.h (struct language_defn) <la_natural_name>: New
415 * ada-lang.c (ada_language_defn): Initialize field
417 * c-lang.c (c_language_defn): Likewise.
418 (cplus_language_defn, asm_language_defn): Likewise.
419 * d-lang.c (d_language_defn): Likewise.
420 * f-lang.c (f_language_defn): Likewise.
421 * go-lang.c (go_language_defn): Likewise.
422 * jv-lang.c (java_language_defn): Likewise.
423 * language.c (unknown_language_defn ): Likewise.
424 (auto_language_defn): Likewise.
425 * m2-lang.c (m2_language_defn): Likewise.
426 * objc-lang.c (objc_language_defn): Likewise.
427 * opencl-lang.c (opencl_language_defn): Likewise.
428 * p-lang.c (pascal_language_defn): Likewise.
430 2013-11-07 Yao Qi <yao@codesourcery.com>
432 * language.c (language_str): Return const char *.
433 (add_language): Add const to 'language_names'
434 * language.h (struct language_defn) <la_name>: Add const.
435 (language_str: Update declaration.
437 2013-11-06 Andreas Arnez <arnez@linux.vnet.ibm.com>
439 * s390-linux-nat.c (s390_read_description): Consider the TE field
440 in the HWCAP for determining 'have_regset_tdb'.
442 2013-11-06 Will Newton <will.newton@linaro.org>
445 * dwarf2read.c (skip_one_die): Sanity check DW_AT_sibling
446 values. (read_partial_die): Likewise.
448 2013-11-06 Muhammad Bilal <mbilal@codesourcery.com>
451 * top.c (command_line_input): Unify interactivity tests to use
452 input_from_terminal_p.
453 * event-top.c (command_line_handler): Likewise.
455 2013-11-06 Yao Qi <yao@codesourcery.com>
457 * Makefile.in (check-perf): New target.
459 2013-11-05 Will Newton <will.newton@linaro.org>
462 * arm-tdep.c (print_fpu_flags): Use filtered output routines.
463 (arm_print_float_info): Likewise.
465 2013-11-04 Anton Blanchard <anton@samba.org>
467 * target.c (memory_xfer_partial): Cap write to 4KB.
469 2013-11-01 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
471 * breakpoint.c (create_longjmp_master_breakpoint): Allow libc
472 probe scan even when the arch provides no get_longjmp_target.
474 2013-10-31 Pedro Alves <palves@redhat.com>
476 * infrun.c (handle_syscall_event): Don't set or clear stop_signal.
477 (handle_inferior_event) <TARGET_WAITKIND_FORKED,
478 TARGET_WAITKIND_VFORKED>: Don't set stop_signal to
479 GDB_SIGNAL_TRAP, or clear it. Pass GDB_SIGNAL_0 to
480 bpstat_explains signal, instead of GDB_SIGNAL_TRAP.
481 <bpstat handling>: If the bpstat chain wants the signal to be
482 hidden, then set stop_signal to GDB_SIGNAL_0 instead of
485 2013-10-31 Andrew Burgess <aburgess@broadcom.com>
487 * breakpoint.c (update_watchpoint): Update error message and add
488 an additional error message.
490 2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
492 * s390-tdep.h: Rename to...
493 * s390-linux-tdep.h: ...here.
494 * s390-tdep.c: Rename to...
495 * s390-linux-tdep.c: ...here. Adjust #include.
496 * s390-nat.c: Rename to...
497 * s390-linux-nat.c: ...here. Adjust #include.
498 * config/s390/s390.mh: Rename to...
499 * config/s390/linux.mh: ...here. Reflect rename s390-nat.o ->
501 * configure.host: Reflect host rename "s390" -> "linux".
502 * configure.tgt: Reflect rename s390-tdep.o -> s390-linux-tdep.o.
503 * Makefile.in (ALL_TARGET_OBS): Likewise.
504 (HFILES_NO_SRCDIR): Reflect rename s390-tdep.h ->
506 (ALLDEPFILES): Reflect rename of .c files.
508 2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
510 * s390-nat.c: Whitespace cleanup.
511 * s390-tdep.c: Likewise.
512 * s390-tdep.h: Remove empty line at end of file.
514 2013-10-30 Maciej W. Rozycki <macro@codesourcery.com>
516 * linux-tdep.c (linux_corefile_thread_callback): Preinitialize
519 2013-10-29 Tom Tromey <tromey@redhat.com>
521 * utils.c (reg): Move undefinition...
522 * gdb_curses.h: ... here. Update comment to mention AIX.
524 2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
526 * exec.h (add_target_sections_of_objfile): New declaration.
527 * exec.c (add_target_sections_of_objfile): New function.
528 * symfile.c (add_symbol_file_command): Update current target sections.
529 (remove_symbol_file_command): New command.
530 (symfile_free_objfile): New function.
531 (_initialize_symfile): Register observer for free_objfile events.
532 * NEWS: Add description of the remove-symbol-file command.
533 * breakpoint.c (disable_breakpoints_in_freed_objfile): New function.
534 * objfiles.c (free_objfile): Notify free_objfile.
535 (is_addr_in_objfile): New function.
536 * objfiles.h (is_addr_in_objfile): New declaration.
537 * printcmd.c (clear_dangling_display_expressions): Act upon free_objfile
538 events instead of solib_unloaded events.
539 (_initialize_printcmd): Register observer for free_objfile instead
540 of solib_unloaded notifications.
541 * solib.c (remove_user_added_objfile): New function.
542 (_initialize_symfile): Add remove-symbol-file.
544 2013-10-29 Andrew Burgess <aburgess@broadcom.com>
546 * infcmd.c (default_print_one_register_info): Use val_print to
547 print all values even optimized out or unavailable ones. Don't
548 try to print a raw form of optimized out or unavailable values.
550 2013-10-29 Yao Qi <yao@codesourcery.com>
552 * auto-load.c (auto_load_pspace_data_cleanup): Get data from
553 parameter 'arg' instead of from program_space_data.
554 * objfiles.c (objfiles_pspace_data_cleanup): Likewise.
555 * solib-darwin.c (darwin_pspace_data_cleanup): Likewise.
556 * solib-dsbt.c (dsbt_pspace_data_cleanup): Likewise.
557 * solib-svr4.c (svr4_pspace_data_cleanup): Likewise.
558 * inflow.c (inflow_inferior_data_cleanup): Get data from
559 parameter 'arg' instead of inferior_data.
560 * registry.h: Add comments.
562 2013-10-28 Pedro Alves <palves@redhat.com>
564 * breakpoint.c (watchpoints_triggered)
565 <!target_stopped_data_address>: Hardcode return 1.
567 2013-10-28 Pedro Alves <palves@redhat.com>
569 * infrun.c (process_event_stop_test): Remove unnecessary scoping
572 2013-10-28 Pedro Alves <palves@redhat.com>
574 * infrun.c (process_event_stop_test): New function, factored out
575 from handle_inferior_event.
576 (handle_inferior_event): 'process_event_stop_test' is now a
577 function instead of a goto label -- adjust.
579 2013-10-28 Pedro Alves <palves@redhat.com>
581 * infrun.c (handle_inferior_event): Move process_event_stop_test
582 goto label to the else branch of the ecs->random_signal check,
583 along with FRAME and GDBARCH re-fetching.
585 2013-10-28 Pedro Alves <palves@redhat.com>
587 * infrun.c (switch_back_to_stepped_thread): New function, factored
588 out from handle_inferior_event.
589 (handle_inferior_event): Adjust to call
590 switch_back_to_stepped_thread. Call it also at the tail of the
591 random signal handling, and return, instead of also handling
592 random signals just before the stepping tests.
594 2013-10-28 Pedro Alves <palves@redhat.com>
596 * infrun.c (clear_stop_func): Delete.
597 (handle_inferior_event): Don't call clear_stop_func and don't
598 clear 'ecs->random_signal'.
600 2013-10-27 Yao Qi <yao@codesourcery.com>
602 * varobj.c (struct varobj_root) <lang>: Rename to 'lang_ops'.
603 (varobj_create, varobj_get_path_expr): Update.
604 (varobj_value_has_mutated, varobj_update): Likewise.
605 (create_child_with_value, new_root_variable): Likewise.
606 (number_of_children, name_of_variable): Likewise.
607 (value_of_child, my_value_of_variable): Likewise.
608 (varobj_value_is_changeable_p): Likewise.
610 2013-10-25 Yao Qi <yao@codesourcery.com>
612 * language.h (struct lang_varobj_ops): Declare.
613 (struct language_defn) <la_varobj_ops>: New field.
614 * ada-lang.c: Include "varobj.h"
615 (defn ada_language_defn): Initialize field 'la_varobj_ops' with
617 * c-lang.c: Include "varobj.h"
618 (c_language_defn): Initialize field 'la_varobj_ops' with
620 (cplus_language_defn): Initialize field 'la_varobj_ops' with
622 (asm_language_defn): Initialize field 'la_varobj_ops' with
624 (minimal_language_defn): Likewise.
625 * d-lang.c (d_language_defn): Likewise.
626 * f-lang.c (f_language_defn): Likewise.
627 * go-lang.c (go_language_defn): Likewise.
628 * m2-lang.c (m2_language_defn): Likewise.
629 * objc-lang.c (objc_language_defn): Likewise.
630 * opencl-lang.c (opencl_language_defn): Likewise.
631 * p-lang.c (pascal_language_defn): Likewise.
632 * language.c (unknown_language_defn): Likewise.
633 (auto_language_defn): Likewise.
634 (local_language_defn): Likewise.
635 * jv-lang.c (java_language_defn): Initialize field
636 'la_varobj_ops' with java_varobj_ops.
637 * varobj.c (varobj_create): Update.
638 * varobj.h (default_varobj_ops): Define macro.
640 2013-10-25 Pedro Alves <palves@redhat.com>
642 * cp-valprint.c (cp_print_value_fields): No longer handle a NULL
644 (cp_print_static_field): If the value is entirely optimized out,
645 print <optimized out> here.
646 * jv-valprint.c (java_print_value_fields): No longer handle a NULL
648 * p-valprint.c (pascal_object_print_static_field): If the value is
649 entirely optimized out, print <optimized out> here.
650 * valops.c (do_search_struct_field)
651 (value_struct_elt_for_reference): No longer handle a NULL static
653 * value.c (value_static_field): Return an optimized out value
656 2013-10-25 Yao Qi <yao@codesourcery.com>
658 * remote.c (remote_traceframe_info): Return early if
659 traceframe is not selected.
661 2013-10-25 Yao Qi <yao@codesourcery.com>
663 * tracepoint.c (traceframe_fun): Remove.
664 (traceframe_sal): Remove.
665 (set_traceframe_context): Add local variables.
667 2013-10-25 Joel Brobecker <brobecker@adacore.com>
669 * varobj.h (struct lang_varobj_ops): Remove spaces between '*'
672 2013-10-24 Maciej W. Rozycki <macro@codesourcery.com>
674 * linux-tdep.c (linux_corefile_thread_callback): Propagate any
675 failure from register information collection.
677 2013-10-24 Maciej W. Rozycki <macro@codesourcery.com>
679 * linux-tdep.c (linux_corefile_thread_data): Remove `num_notes'
681 (linux_corefile_thread_callback): Update accordingly.
682 (linux_make_corefile_notes): Likewise.
684 2013-10-24 Pedro Alves <palves@redhat.com>
686 * NEWS (New options): Mention set/show startup-with-shell.
687 * config/alpha/nm-osf3.h (START_INFERIOR_TRAPS_EXPECTED): Set to 2
689 * fork-child.c (fork_inferior, startup_inferior): Handle 'set
691 (show_startup_with_shell): New function.
692 (_initialize_fork_child): Register the set/show startup-with-shell
694 * inf-ptrace.c (inf_ptrace_create_inferior): Remove comment.
695 * inf-ttrace.c (inf_ttrace_him): Remove comment.
696 * procfs.c (procfs_init_inferior): Remove comment.
697 * infcmd.c (startup_with_shell): New global.
698 * inferior.h (startup_with_shell): Declare global.
699 (STARTUP_WITH_SHELL): Delete.
700 (START_INFERIOR_TRAPS_EXPECTED): Set to 1 by default instead of 2.
702 2013-10-23 Pedro Alves <palves@redhat.com>
704 * common/gdb_signals.h (gdb_signal_to_symbol_string): Declare.
705 * common/signals.c: Include "gdb_assert.h".
706 (signals): New field 'symbol'.
707 (SET): Use the 'symbol' parameter.
708 (gdb_signal_to_symbol_string): New function.
709 * infrun.c (handle_inferior_event) <random signal>: In debug
710 output, print the random signal enum as string in addition to its
712 * target/waitstatus.c (target_waitstatus_to_string): Print the
713 signal's enum value as string instead of the (POSIX) signal name.
715 2013-10-23 Gary Benson <gbenson@redhat.com>
718 * common/linux-osdata.c (command_from_pid): Reduced size of cmd
719 from 32 to 18. Adjusted fscanf format string accordingly.
720 (Avoids leaving cmd unterminated.)
721 (print_sockets): Do not parse tlen, inode, sl, timeout, txq, rxq,
722 trun, retn or extra. (Avoids leaving extra unterminated.) Check
723 that local_address and remote_address will not overflow.
724 (linux_xfer_osdata_modules): Parse lines using strtok to avoid
725 leaving dependencies unterminated. Parse size as "%u" to match
728 2013-10-22 Pedro Alves <palves@redhat.com>
730 * infrun.c (handle_inferior_event) <thread hop>: Don't clear or
731 set ecs->random signal.
733 2013-10-22 Pedro Alves <palves@redhat.com>
735 * infrun.c (keep_going): Update comments.
737 2013-10-22 Pedro Alves <palves@redhat.com>
739 * remote.c (remote_parse_stop_reply) <'T'/'S'/'X' replies>: Map
740 invalid signal numbers to GDB_SIGNAL_UNKNOWN.
742 2013-10-22 Pedro Alves <palves@redhat.com>
744 * include/gdb/signals.def (TARGET_EXC_BAD_ACCESS): Rename to
746 (TARGET_EXC_BAD_INSTRUCTION): Rename to GDB_EXC_BAD_INSTRUCTION.
747 (TARGET_EXC_ARITHMETIC): Rename to GDB_EXC_ARITHMETIC.
748 (TARGET_EXC_EMULATION): Rename to GDB_EXC_EMULATION.
749 (TARGET_EXC_SOFTWARE): Rename to GDB_EXC_SOFTWARE.
750 (TARGET_EXC_BREAKPOINT): Rename to GDB_EXC_BREAKPOINT.
751 (GDB_SIGNAL_LAST): Change description string.
752 * common/signals.c (gdb_signal_from_host, do_gdb_signal_to_host):
753 Adjust to signal renaming.
754 * darwin-nat.c (darwin_decode_message): Likewise.
756 2013-10-22 Jose E. Marchesi <jose.marchesi@oracle.com>
758 * MAINTAINERS (Write After Approval): Add myself to the list.
760 2013-10-18 Andrew Burgess <aburgess@broadcom.com>
762 * breakpoint.c (update_watchpoint): If hardware watchpoints are
763 forced off, downgrade them to software watchpoints if possible,
764 and error out if not possible.
765 (watch_command_1): Move watchpoint type selection closer to
766 watchpoint creation, and extend the comments.
768 2013-10-18 Pedro Alves <palves@redhat.com>
771 * infrun.c (handle_inferior_event): Keep going if we got a random
772 signal we should not stop for, instead of falling through to the
775 2013-10-18 Yao Qi <yao@codesourcery.com>
777 * c-varobj.c (cplus_number_of_children): Fix indentation.
779 2013-10-17 Tom Tromey <tromey@redhat.com>
782 * printcmd.c (printcmd): Call gdb_flush.
784 2013-10-17 Tom Tromey <tromey@redhat.com>
786 * elfread.c (struct elfinfo) <stabindexsect>: Remove.
787 (elf_locate_sections): Update.
789 2013-10-17 Yao Qi <yao@codesourcery.com>
791 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
792 * ada-varobj.c: Remove the include of ada-varobj.h.
793 (ada_varobj_get_number_of_children): Declare.
794 (ada_varobj_get_name_of_child): Make it static.
795 (ada_varobj_get_path_expr_of_child): Likewise.
796 (ada_varobj_get_value_of_child): Likewise.
797 (ada_varobj_get_type_of_child): Likewise.
798 (ada_varobj_get_value_of_array_variable): Likewise.
799 * ada-varobj.h: Remove.
801 2013-10-17 Yao Qi <yao@codesourcery.com>
803 * Makefile.in (SFILES): Add c-varobj.c and jv-varobj.c.
804 (COMMON_OBS): Add c-varobj.o and jv-varobj.o.
805 * ada-varobj.c: Include "varobj.h".
806 (ada_number_of_children): New. Moved from varobj.c.
807 (ada_name_of_variable, ada_name_of_child): Likewise.
808 (ada_path_expr_of_child, ada_value_of_child): Likewise.
809 (ada_type_of_child, ada_value_of_variable): Likewise.
810 (ada_value_is_changeable_p, ada_value_has_mutated): Likewise.
811 (ada_varobj_ops): New.
812 * c-varobj.c, jv-varobj.c: New file. Moved from varobj.c.
813 * gdbtypes.c (get_target_type): New. Moved from varobj.c.
814 * gdbtypes.h (get_target_type): Declare.
815 * varobj.c: Remove the inclusion of "ada-varobj.h" and
817 (ANONYMOUS_STRUCT_NAME): Move it to c-varobj.c.
818 (ANONYMOUS_UNION_NAME): Likewise.
819 (get_type, get_value_type, get_target_type): Remove declarations.
820 (value_get_print_value, varobj_value_get_print_value): Likewise.
821 (c_number_of_children, c_name_of_variable): Likewise.
822 (c_name_of_child, c_path_expr_of_child): Likewise.
823 (c_value_of_child, c_type_of_child): Likewise.
824 (c_value_of_variable, cplus_number_of_children): Likewise.
825 (cplus_class_num_children, cplus_name_of_variable): Likewise.
826 (cplus_name_of_child, cplus_path_expr_of_child): Likewise.
827 (cplus_value_of_child, cplus_type_of_child): Likewise.
828 (cplus_value_of_variable, java_number_of_children): Likewise.
829 (java_name_of_variable, java_name_of_child): Likewise.
830 (java_path_expr_of_child, java_value_of_child): Likewise.
831 (java_type_of_child, java_value_of_variable): Likewise.
832 (ada_number_of_children, ada_name_of_variable): Likewise.
833 (ada_name_of_child, ada_path_expr_of_child): Likewise.
834 (ada_value_of_child, ada_type_of_child): Likewise.
835 (ada_value_of_variable, ada_value_is_changeable_p): Likewise.
836 (ada_value_has_mutated): Likewise.
837 (struct language_specific): Move it to varobj.h.
838 (CPLUS_FAKE_CHILD): Move it to varobj.h.
839 (restrict_range): Rename it varobj_restrict_range. Make it extern.
841 (get_path_expr_parent): Rename it to varobj_get_path_expr_parent.
843 (is_anonymous_child): Move it to c-varobj.c and rename to
844 varobj_is_anonymous_child. Caller update.
845 (get_type): Move it to c-varobj.c.
846 (get_value_type): Rename it varobj_get_value_type. Make it
848 (get_target_type): Move it gdbtypes.c.
849 (varobj_formatted_print_options): New function.
850 (value_get_print_value): Rename it to
851 varobj_value_get_print_value and make it extern.
852 (varobj_value_is_changeable_p): Make it extern.
853 (adjust_value_for_child_access): Move it to c-varobj.c.
854 (default_value_is_changeable_p): Rename it to
855 varobj_default_value_is_changeable_p. Make it extern.
856 (c_number_of_children, c_name_of_variable): Move it to c-varobj.c
857 (c_name_of_child, c_path_expr_of_child): Likewise.
858 (c_value_of_child, c_type_of_child): Likewise.
859 (c_value_of_variable, cplus_number_of_children): Likewise.
860 (cplus_class_num_children, cplus_name_of_variable): Likewise.
861 (cplus_name_of_child, cplus_path_expr_of_child): Likewise.
862 (cplus_value_of_child, cplus_type_of_child): Likewise.
863 (cplus_value_of_variable): Likewise.
864 (java_number_of_children, java_name_of_variable): Move it to jv-varobj.c.
865 (java_name_of_child, java_path_expr_of_child): Likewise.
866 (java_value_of_child, java_type_of_child): Likewise.
867 (java_value_of_variable): Likewise.
868 (ada_number_of_children, ada_name_of_variable): Move it to ada-varobj.c.
869 (ada_name_of_child, ada_path_expr_of_child): Likewise.
870 (ada_value_of_child, ada_type_of_child): Likewise.
871 (ada_value_of_variable, ada_value_is_changeable_p): Likewise.
872 (ada_value_has_mutated): Likewise.
873 * varobj.h (CPLUS_FAKE_CHILD): New macro, moved from varobj.c.
874 (struct lang_varobj_ops): New. Renamed by 'struct language_specific'.
875 (c_varobj_ops, cplus_varobj_ops): Declare.
876 (java_varobj_ops, ada_varobj_ops): Declare.
877 (varobj_default_value_is_changeable_p): Declare.
878 (varobj_value_is_changeable_p): Declare.
879 (varobj_get_value_type, varobj_is_anonymous_child): Declare.
880 (varobj_get_path_expr_parent): Declare.
881 (varobj_value_get_print_value): Declare.
882 (varobj_formatted_print_options): Declare.
883 (varobj_restrict_range): Declare.
885 2013-10-17 Luis Machado <lgustavo@codesourcery.com>
887 * target/waitstatus.h (target_waitkind): Remove spurious
888 character from the comments.
890 2013-10-17 Joel Brobecker <brobecker@adacore.com>
892 * gdbarch.sh (get_longjmp_target): Add method documentation.
893 * gdbarch.h: Regenerate.
895 2013-10-16 Tom Tromey <tromey@redhat.com>
897 * dbxread.c (read_dbx_symtab) <bss_ext_symbol>: Remove unused
900 2013-10-16 Luis Machado <lgustavo@codesourcery.com>
902 * gcore.in: Call GDB using the full path to the gcore script.
903 Error out if the GDB binary is not found.
905 2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
908 * dwarf2read.c (dw2_get_real_path): Remove unnecessary call to
911 2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
914 * target.c (target_disable_btrace): Fix invalid return value for
916 (target_teardown_btrace): Likewise.
918 2013-10-14 Yao Qi <yao@codesourcery.com>
920 * varobj.c (struct varobj): Move most of the fields to
922 (struct varobj_dynamic): New struct.
923 (varobj_get_display_hint) [HAVE_PYTHON]: Adjust.
924 (varobj_has_more): Likewise.
925 (dynamic_varobj_has_child_method): Likewise.
926 (update_dynamic_varobj_children): Likewise.
927 (varobj_get_num_children): Likewise.
928 (varobj_list_children, varobj_pretty_printed_p): Likewise.
929 (install_new_value_visualizer): Likewise.
930 (install_new_value_visualizer, install_new_value): Likewise.
931 (varobj_update, new_variable, free_variable): Likewise.
932 (my_value_of_variable, value_get_print_value): Likewise.
933 (install_visualizer): Change the type of parameter 'var' to
934 'struct varobjd_dynamic *'. Callers update.
935 * varobj.h (struct varobj): Moved from varobj.c.
936 (struct varobj) <dynamic>: New field.
938 2013-10-13 Sandra Loosemore <sandra@codesourcery.com>
940 * nios2-tdep.c (nios2_reg_names): Use "sstatus" rather than "ba"
941 as the preferred name of r30.
942 * nios2-linux-tdep.c (reg_offsets): Likewise.
943 * features/nios2-cpu.xml: Likewise.
944 * features/nios2-linux.c: Regenerated.
945 * features/nios2.c: Regenerated.
946 * regformats/nios2-linux.dat: Regenerated.
948 2013-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
950 Canonicalize directories for EXEC_FILENAME.
951 * exec.c (exec_file_attach): Use gdb_realpath_keepfile for
953 * utils.c (gdb_realpath_keepfile): New function.
954 * utils.h (gdb_realpath_keepfile): New declaration.
956 2013-10-11 Doug Evans <dje@google.com>
958 * Makefile.in (GDBFLAGS): New variable.
961 2013-10-11 Joel Brobecker <brobecker@adacore.com>
963 * NEWS: Add entry documenting the new "-catch-assert" and
964 "-catch-exception" GDB/MI commands.
966 2013-10-11 Joel Brobecker <brobecker@adacore.com>
968 * breakpoint.h (init_ada_exception_breakpoint): Add parameter
970 * breakpoint.c (init_ada_exception_breakpoint): Add parameter
971 "enabled". Set B->ENABLE_STATE accordingly.
972 * ada-lang.h (ada_exception_catchpoint_kind): Move here from
974 (create_ada_exception_catchpoint): Add declaration.
975 * ada-lang.c (ada_exception_catchpoint_kind): Move to ada-lang.h.
976 (create_ada_exception_catchpoint): Make non-static. Add new
977 parameter "disabled". Use it in call to
978 init_ada_exception_breakpoint.
979 (catch_ada_exception_command): Add parameter "enabled" in call
980 to create_ada_exception_catchpoint.
981 (catch_assert_command): Likewise.
983 * mi/mi-cmds.h (mi_cmd_catch_assert, mi_cmd_catch_exception):
985 * mi/mi-cmds.c (mi_cmds): Add the "catch-assert" and
986 "catch-exception" commands.
987 * mi/mi-cmd-catch.c: Add #include "ada-lang.h".
988 (mi_cmd_catch_assert, mi_cmd_catch_exception): New functions.
990 2013-10-11 Joel Brobecker <brobecker@adacore.com>
992 * ada-lang.c (enum ada_exception_catchpoint_kind): Renames
993 "enum exception_catchpoint_kind". Replace the "ex_" prefix
994 of all its enumerates with "ada_". Update the rest of this
997 2013-10-11 Joel Brobecker <brobecker@adacore.com>
999 * ada-lang.c (ada_decode_exception_location): Delete.
1000 (create_ada_exception_catchpoint): Remove arguments "sal",
1001 "addr_string" and "ops". Add argument "ex_kind" instead.
1002 Adjust implementation accordingly, calling ada_exception_sal
1003 to get the entities it no longer gets passed as arguments.
1004 Document the function's arguments.
1005 (catch_ada_exception_command): Use catch_ada_exception_command_split
1006 instead of ada_decode_exception_location, and update call to
1007 create_ada_exception_catchpoint.
1008 (catch_ada_assert_command_split): Renames
1009 ada_decode_assert_location. Remove parameters "addr_string" and
1010 "ops", and now returns void. Adjust implementation accordingly.
1011 Update the function documentation.
1012 (catch_assert_command): Use catch_ada_assert_command_split
1013 instead of ada_decode_assert_location. Update call to
1014 create_ada_exception_catchpoint.
1016 2013-10-11 Joel Brobecker <brobecker@adacore.com>
1018 * utils.h (perror_warning_with_name): Add declaration.
1019 * utils.c (perror_warning_with_name): New function.
1020 * cli/cli-cmds.c (source_script_with_search): Add call to
1021 perror_warning_with_name if from_tty is nul.
1023 2013-10-11 Joel Brobecker <brobecker@adacore.com>
1025 * utils.c (perror_string): New function, extracted out of
1026 throw_perror_with_name.
1027 (throw_perror_with_name): Rework to use perror_string.
1029 2013-10-11 Yao Qi <yao@codesourcery.com>
1031 * remote.c (discard_pending_stop_replies_in_queue): Update
1033 (struct stop_reply) <rs>: New field.
1034 (remove_stop_reply_of_remote_state): New function.
1035 (discard_pending_stop_replies_in_queue): Add parameter 'rs'.
1036 Callers update. Pass remove_stop_reply_of_remote_state to
1038 (remote_parse_stop_reply): Initialize field 'rs'.
1040 2013-10-10 Will Newton <will.newton@linaro.org>
1042 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
1045 2013-10-10 Joel Brobecker <brobecker@adacore.com>
1047 * cli/cli-cmds.c (show_baud_rate): Moved to serial.c as
1048 serial_baud_show_cmd.
1049 (_initialize_cli_cmds): Delete the code creating the
1050 "set/show remotebaud" commands.
1051 * serial.c (baud_rate): Move here from top.c.
1052 (serial_baud_show_cmd): Move here from cli/cli-cmds.c.
1053 (_initialize_serial): Create "set/show serial baud" commands.
1054 Add "set/show remotebaud" command aliases.
1055 * top.c (baud_rate): Moved to serial.c.
1056 * NEWS: Document the new "set/show serial baud" commands,
1057 replacing "set/show remotebaud".
1059 2013-10-09 Pedro Alves <palves@redhat.com>
1061 * breakpoint.c (insert_bp_location): Use memory_error_message to
1062 build the memory error string.
1063 * c-lang.c: Include "gdbcore.h".
1064 (c_get_string): Use memory_error to throw error.
1065 (target_xfer_memory_error): Delete.
1066 (memory_error_message): New, factored out from
1067 target_xfer_memory_error.
1068 (memory_error): Change parameter type to target_xfer_error.
1070 (read_memory): Use memory_error instead of
1071 target_xfer_memory_error.
1072 * gdbcore.h: Include "target.h".
1073 (memory_error): Change parameter type to target_xfer_error.
1074 (memory_error_message): Declare function.
1075 * target.c (target_read_memory, target_read_stack)
1076 (target_write_memory, target_write_raw_memory): Return
1077 TARGET_XFER_E_IO on error. Adjust comments.
1078 (get_target_memory): Pass TARGET_XFER_E_IO to memory_error,
1080 * target.h (target_read, target_insert_breakpoint)
1081 (target_remove_breakpoint): Adjust comments.
1082 * valprint.c (partial_memory_read): Rename parameter, and adjust
1084 (val_print_string): Use memory_error_message to build the memory
1087 2013-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1089 * common/filestuff.c (gdb_fopen_cloexec): Remove initialization of
1090 result variable. Rename variable fopen_e_ever_failed to
1091 fopen_e_ever_failed_einval. Retry fopen only for errno EINVAL.
1093 2013-10-09 Pedro Alves <palves@redhat.com>
1095 * monitor.c (monitor_write_memory, monitor_write_memory_bytes)
1096 (monitor_write_memory_longlongs, monitor_write_memory_block):
1097 Constify 'myaddr' parameter.
1098 (monitor_xfer_memory): Adjust interface as monitor_xfer_partial
1100 (monitor_xfer_partial): New function.
1101 (init_base_monitor_ops): Don't install a deprecated_xfer_memory
1102 hook. Install a to_xfer_partial hook.
1104 2013-10-09 Tom Tromey <tromey@redhat.com>
1106 * dwarf2read.c (dwarf2_get_dwz_file): Update for type change in
1107 bfd_get_alt_debug_link_info.
1109 2013-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1111 New flag OBJF_NOT_FILENAME.
1112 * auto-load.c (auto_load_objfile_script): Check also OBJF_NOT_FILENAME.
1113 * jit.c (jit_object_close_impl): Use OBJF_NOT_FILENAME for
1115 (jit_bfd_try_read_symtab): Use OBJF_NOT_FILENAME for
1116 symbol_file_add_from_bfd.
1117 * jv-lang.c (get_dynamics_objfile): Use OBJF_NOT_FILENAME for
1119 * objfiles.c (allocate_objfile): Assert OBJF_NOT_FILENAME if NAME is
1121 * objfiles.h (OBJF_NOT_FILENAME): New.
1123 2013-10-08 Tom Tromey <tromey@redhat.com>
1125 * Makefile.in (SFILES): Add build-id.c.
1126 (HFILES_NO_SRCDIR): Add build-id.h.
1127 * build-id.c: New file, largely from elfread.c. Modified
1129 * build-id.h: New file.
1130 * dwarf2read.c (dwarf2_get_dwz_file): Update for change to
1131 bfd_get_alt_debug_link_info. Verify dwz file's build-id.
1132 Search for dwz file using build-id.
1133 * elfread.c (build_id_bfd_get, build_id_verify)
1134 (build_id_to_debug_filename, find_separate_debug_file): Remove.
1136 2013-10-08 Joel Brobecker <brobecker@adacore.com>
1138 * ada-lang.c (compare_names_with_case): Renamed from
1139 compare_names, adding a new parameter "casing" and its handling.
1140 New function documentation.
1141 (compare_names): New function, implemented using
1142 compare_names_with_case.
1144 2013-10-08 Joel Brobecker <brobecker@adacore.com>
1146 * ada-lang.c (ada_exception_sal): Remove advance declaration.
1148 2013-10-07 Tom Tromey <tromey@redhat.com>
1150 * objfiles.c (free_objfile_per_bfd_storage): Delete the
1151 demangled_names_hash.
1152 (free_objfile): Don't delete the demangled_names_hash.
1153 * objfiles.h (struct objfile_per_bfd_storage)
1154 <demangled_names_hash>: New field.
1155 (struct objfile) <demangled_names_hash>: Move to
1156 objfile_per_bfd_storage.
1157 * symfile.c (reread_symbols): Don't delete the
1158 demangled_names_hash.
1159 * symtab.c (create_demangled_names_hash): Update.
1160 (symbol_set_names): Update.
1162 2013-10-07 Tom Tromey <tromey@redhat.com>
1164 * gdb_bfd.c (struct gdb_bfd_data) <relocation_computed,
1165 needs_relocations>: New fields.
1166 (gdb_bfd_requires_relocations): New function.
1167 * gdb_bfd.h (gdb_bfd_requires_relocations): Declare.
1168 * objfiles.c (get_objfile_bfd_data): Disallow sharing if
1169 the BFD needs relocations applied.
1171 2013-10-07 Pedro Alves <palves@redhat.com>
1173 PR breakpoints/11568
1174 * breakpoint.c (remove_threaded_breakpoints): Say "no longer in
1175 the thread list" instead of "gone".
1177 2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
1179 * NEWS: Mention new convenience variable $_exitsignal.
1180 * corelow.c (core_open): Reset exit convenience variables. Set
1181 $_exitsignal to the uncaught signal which generated the corefile.
1182 * infrun.c (handle_inferior_event): Reset exit convenience
1183 variables. Set $_exitsignal for TARGET_WAITKIND_SIGNALLED.
1184 (clear_exit_convenience_vars): New function.
1185 * inferior.h (clear_exit_convenience_vars): New prototype.
1187 2013-10-06 Yao Qi <yao@codesourcery.com>
1189 * varobj.h: Add comments to enum varobj_languages.
1191 2013-10-04 Doug Evans <dje@google.com>
1193 Add support for DWP file format version 2.
1194 * NEWS: Mention support for DWP file format version 2.
1195 * dwarf2read.c (dwarf2_section_info): Convert asection field to a
1196 union of asection, containing_section. New fields virtual_offset
1197 and is_virtual. Change type of readin filed from int to char.
1198 (dwo_sections, dwo_file): Tweak comments.
1199 (dwp_v2_section_ids): New enum.
1200 (dwp_sections): New fields abbrev, info, line, loc, macinfo, macro,
1202 (virtual_v1_dwo_sections): Renamed from virtual_dwo_sections.
1204 (virtual_v2_dwo_sections): New struct.
1205 (dwp_hash_table): New fields version, nr_columns. Change type of
1206 section_pool field to a union.
1207 (dwp_file): New field version.
1208 (dwarf2_has_info): Check for virtual sections.
1209 (get_containing_section): New function.
1210 (get_section_bfd_owner, get_section_bfd_section): Call it.
1211 (dwarf2_locate_sections): Update.
1212 (dwarf2_section_empty_p): Update.
1213 (dwarf2_read_section): Handle virtual sections.
1214 (locate_dwz_sections): Update.
1215 (create_dwp_hash_table): Document and handle V2 format.
1216 (locate_v1_virtual_dwo_sections): Renamed from
1217 locate_virtual_dwo_sections and update. All callers updated.
1218 (create_dwo_unit_in_dwp_v1): Renamed from create_dwo_in_dwp.
1219 Delete arg htab. Rename arg section_index to unit_index.
1220 All callers updated.
1221 (MAX_NR_V1_DWO_SECTIONS): Renamed from MAX_NR_DWO_SECTIONS.
1223 (create_dwp_v2_section, create_dwo_unit_in_dwp_v2): New functions.
1224 (lookup_dwo_unit_in_dwp): Add V2 support.
1225 (dwarf2_locate_dwo_sections): Update.
1226 (dwarf2_locate_common_dwp_sections): Renamed from
1227 dwarf2_locate_dwp_sections and update. All callers updated.
1228 (dwarf2_locate_v2_dwp_sections): New function.
1229 (open_and_init_dwp_file): Add V2 support.
1230 (read_str_index): New locals str_section, str_offsets_section.
1232 2013-10-04 Pedro Alves <palves@redhat.com>
1234 * common/ptid.c (null_ptid, minus_one_ptid, ptid_build)
1235 (pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid)
1236 (ptid_equal, ptid_is_pid, ptid_lwp_p, ptid_tid_p): Replace
1237 describing comments with references to ptid.h.
1238 * common/ptid.h: Remove intro description of constructors,
1239 accessors and predicates.
1240 (struct ptid): Reformat.
1241 (minus_one_ptid, ptid_build, pid_to_ptid, ptid_get_pid)
1242 (ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid): Change
1243 describing comments.
1245 2013-10-04 Joel Brobecker <brobecker@adacore.com>
1247 * aix-thread.c (sync_threadlists): Add missing ')' in call
1250 2013-10-04 Joel Brobecker <brobecker@adacore.com>
1252 * procfs.c (procfs_init_inferior): Fix typo causing the build
1255 2013-10-04 Joel Brobecker <brobecker@adacore.com>
1257 * aix-thread.c (ptrace32): Remove cast to addr_ptr.
1259 2013-10-04 Joel Brobecker <brobecker@adacore.com>
1261 * mi/mi-main.c (run_one_inferior): Add function description.
1262 Make ARG a pointer to an integer whose value determines whether
1263 we should "run" or "start" the program.
1264 (mi_cmd_exec_run): Add handling of the "--start" option.
1265 Reject all other command-line options.
1266 * NEWS: Add entry for "-exec-run"'s new "--start" option.
1268 2013-10-04 Yao Qi <yao@codesourcery.com>
1270 * remote-notif.h (REMOTE_NOTIF_ID): New enum.
1271 (struct notif_client) <pending_event>: Moved
1272 to struct remote_notif_state.
1274 (struct remote_notif_state) <pending_event>: New field.
1275 (notif_event_xfree): Declare.
1276 * remote-notif.c (handle_notification): Adjust.
1277 (notif_event_xfree): New function.
1278 (do_notif_event_xfree): Call notif_event_xfree.
1279 (remote_notif_state_xfree): Call notif_event_xfree to free
1280 each element in field pending_event.
1281 * remote.c (discard_pending_stop_replies): Remove declaration.
1282 (discard_pending_stop_replies_in_queue): Declare.
1283 (remote_close): Call discard_pending_stop_replies_in_queue
1284 instead of discard_pending_stop_replies.
1285 (remote_start_remote): Adjust.
1286 (stop_reply_xfree): Call notif_event_xfree.
1287 (notif_client_stop): Adjust initialization.
1288 (remote_notif_remove_all): Rename it to ...
1289 (remove_stop_reply_for_inferior): ... this. Update comments.
1290 Don't check INF is NULL.
1291 (discard_pending_stop_replies): Return early if notif_state is
1292 NULL. Adjust. Don't check INF is NULL.
1293 (remote_notif_get_pending_events): Adjust.
1294 (discard_pending_stop_replies_in_queue): New function.
1295 (remote_wait_ns): Likewise.
1297 2013-10-04 Yao Qi <yao@codesourcery.com>
1299 * remote-notif.c (DECLARE_QUEUE_P): Remove.
1300 (notif_queue): Remove.
1301 (remote_notif_process): Add one parameter 'notif_queue'.
1302 Update comments. Callers update.
1303 (remote_async_get_pending_events_token): Remove.
1304 (remote_notif_register_async_event_handler): Remove.
1305 (remote_notif_unregister_async_event_handler): Remove.
1306 (handle_notification): Add parameter 'notif_queue'. Update
1307 comments. Callers update.
1308 (notif_xfree): Remove.
1309 (remote_notif_state_allocate): New function.
1310 (remote_notif_state_xfree): New function.
1311 (_initialize_notif): Remove code to allocate queue.
1312 * remote-notif.h (DECLARE_QUEUE_P): Moved from remote-notif.c.
1313 (struct remote_notif_state): New.
1314 (handle_notification): Update declaration.
1315 (remote_notif_process): Likewise.
1316 (remote_notif_register_async_event_handler): Remove.
1317 (remote_notif_unregister_async_event_handler): Remove.
1318 (remote_notif_state_allocate): Declare.
1319 (remote_notif_state_xfree): Declare.
1320 * remote.c (struct remote_state) <notif_state>: New field.
1321 (remote_close): Don't call
1322 remote_notif_unregister_async_event_handler. Call
1323 remote_notif_state_xfree.
1324 (remote_open_1): Don't call
1325 remote_notif_register_async_event_handler. Call
1326 remote_notif_state_allocate.
1328 2013-10-04 Yao Qi <yao@codesourcery.com>
1330 * varobj.c (create_child_with_value): Remove 'const' from the
1331 type of parameter 'name'.
1332 (varobj_add_child): Likewise.
1333 (install_dynamic_child): Remove 'const' from the type of
1335 (varobj_add_child): Likewise.
1336 (create_child_with_value): Likewise. Update comments. Don't
1338 (update_dynamic_varobj_children): Duplicate 'name'
1339 and pass it to install_dynamic_child.
1341 2013-10-03 Phil Muldoon <pmuldoon@redhat.com>
1343 * python/py-value.c (convert_value_from_python): Move PyInt_Check
1344 conversion logic to occur after PyLong_Check. Comment on order
1345 change significance.
1346 * python/py-arch.c (archpy_disassemble): Comment on order of
1347 conversion for integers and longs.
1349 2013-10-03 Pedro Alves <palves@redhat.com>
1351 * common/linux-ptrace.c (linux_check_ptrace_features): Factor out
1352 the PTRACE_O_TRACESYSGOOD and PTRACE_O_TRACEFORK to separate
1353 functions. Always test for PTRACE_O_TRACESYSGOOD even if
1354 PTRACE_O_TRACEFORK is not supported.
1355 (linux_test_for_tracesysgood): New function.
1356 (linux_test_for_tracefork): New function, factored out from
1357 linux_check_ptrace_features, and also don't kill child_pid here.
1359 2013-10-03 Tristan Gingold <gingold@adacore.com>
1361 * i386-darwin-nat.c (i386_darwin_dr_set): Fix argument type.
1362 Remove verbose error reporting. Use detected state to
1363 thread_set_state call.
1364 (i386_darwin_dr_get): Fix return type. Remove verbose error
1366 Remove trailing spaces.
1368 2013-10-02 Pedro Alves <palves@redhat.com>
1370 * cp-valprint.c (cp_print_value_fields): Adjust calls to
1371 val_print_optimized_out.
1372 * jv-valprint.c (java_print_value_fields): Likewise.
1373 * p-valprint.c (pascal_object_print_value_fields): Likewise.
1374 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full)
1375 <DWARF_VALUE_REGISTER>: If the register was not saved, return a
1376 new optimized out value.
1377 * findvar.c (address_from_register): Likewise.
1378 * frame.c (put_frame_register): Tweak error string to say the
1379 register was not saved, rather than optimized out.
1380 * infcmd.c (default_print_one_register_info): Adjust call to
1381 val_print_optimized_out. Use value_of_register instead of
1382 get_frame_register_value.
1383 * mi/mi-main.c (output_register): Use value_of_register instead of
1384 get_frame_register_value.
1385 * valprint.c (valprint_check_validity): Likewise.
1386 (val_print_optimized_out): New value parameter. If the value is
1387 lval_register, print <not saved> instead.
1388 (value_check_printable, val_print_scalar_formatted): Adjust calls
1389 to val_print_optimized_out.
1390 * valprint.h (val_print_optimized_out): New value parameter.
1391 * value.c (struct value) <optimized_out>: Extend comment.
1392 (error_value_optimized_out): New function.
1393 (require_not_optimized_out): Use it. Use a different string for
1394 lval_register values.
1395 * value.h (error_value_optimized_out): New declaration.
1396 * NEWS: Mention <not saved>.
1398 2013-10-02 Joel Brobecker <brobecker@adacore.com>
1400 * symtab.c (compare_search_syms): Use FILENAME_CMP instead of
1401 strcmp to compare two symtab filenames.
1403 2013-10-02 Joel Brobecker <brobecker@adacore.com>
1405 * symtab.c (search_symbols_equal): Delete.
1406 (sort_search_symbols_remove_dups): Replace call to
1407 search_symbols_equal by call to compare_search_syms,
1408 adjusting as necessary.
1410 2013-10-02 Phil Muldoon <pmuldoon@redhat.com>
1413 * python/python.c: Document gdb.execute command in Python help.
1415 2013-10-02 Phil Muldoon <pmuldoon@redhat.com>
1417 * python/py-frame.c (frame_info_to_frame_object): Use
1418 gdbpy_convert_exception. Clean up Python object on failure.
1420 2013-10-02 Phil Muldoon <pmuldoon@redhat.com>
1422 * python/lib/gdb/command/frame_filters.py
1423 (InfoFrameFilter.list_frame_filters): Retrieve exception manually.
1424 (ShowFrameFilterPriority.invoke): Ditto.
1426 2013-10-01 Keith Seitz <keiths@redhat.com>
1428 * linespec.c (struct ls_parser): Make 'saved_arg' const.
1429 (parse_linespec): Make 'argptr' const.
1430 Remove temporary cast of 'argptr' to const char **.
1431 (decode_line_full): Pass const pointer to parse_linespec.
1432 (decode_line_1): Likewise.
1433 (decode_objc): Make local variable 'new_argptr' const.
1434 (find_function_symbols): Remove temporary cast to char *
1436 * objc-lang.c (find_imps): Make argument 'method' const.
1438 * objc-lang.h (find_imps): Likewise.
1440 2013-10-01 Keith Seitz <keiths@redhat.com>
1442 * completer.c (skip_quoted_chars): Make all arguments const.
1444 (skip_quoted): Likewise.
1445 * completer.h (skip_quoted_chars): Likewise.
1446 (skip_quoted): Likewise.
1447 * defs.h (skip_quoted): Remove duplicate declaration.
1448 * jv-exp.y: Include completer.h.
1449 (yylex): Remove unneccessary cast to char * fro skip_quoted.
1450 * p-exp.y: Include completer.h.
1452 2013-10-01 Keith Seitz <keiths@redhat.com>
1454 * c-exp.y (parse_number): Make first argument const.
1455 Make a copy of the input to manipulate.
1456 (c_parse_escape): Make first argument const.
1457 Make local variable 'tokptr' const.
1458 (parse_string_or_char): Make first two arguments const.
1459 (macro_original_text): Make const.
1460 (lex_one_token): Make local variable 'tokstart' const.
1461 Likewise for local variables named 'p'.
1462 Cast away const for struct stoken (temporary).
1463 * c-lang.h (c_parse_escpae): Make first argument const.
1464 * cli/cli-cmds.c (echo_command): Make local variable 'p'
1466 * cli/cli-setshow.c (do_set_command): Likewise for 'p' in
1468 * f-exp.y (parse_number): Make first argument const.
1469 (match_string_literal): Make local variable 'tokstart'
1471 (yylex): Make local variable 'p' const.
1472 Cast away const for struct stoken (temporary).
1473 * go-exp.y (parse_number): Make first argument const.
1474 (parse_string_or_char): Likewise.
1475 Make local variable 'tokstart' const.
1476 (lex_one_token): Likewise for numerous locals called 'p'.
1477 Cast away const for struct stoken (temporary).
1478 * jv-exp.y (parse_number): Make first argument const.
1479 Make local variables 'tokstart' and 'tokptr' const.
1480 Cast away const for call to skip_quoted (temporary).
1481 (yylex): Make local variable 'p' const.
1482 Cast away const for struct stoken (temporary).
1483 * m2-exp.y (parse_number): Make local variable 'p' const.
1484 (yylex): Likewise for 'tokstart'.
1485 Cast away const for struct stoken (temporary).
1486 Make local variable 'p' const.
1487 * macroexp.c (get_character_constant): Pass a const string
1489 (get_string_literal): Likewise.
1490 (macro_expand_next): Make first argument const.
1491 Cast away const for init_shared_buffer.
1492 * macroexp.h (macro_expand_next): Make first argument const.
1493 * p-exp.y (yylex): Make a local copy of 'lexptr'.
1494 Pass a const string to c_parse_escape.
1495 Make local variables 'p' and 'namestart' const.
1496 * parse.c (lexptr): Make const.
1497 (prev_lexptr): Likewise.
1498 (find_template_name_end): Return const.
1499 Make argument const, too.
1500 (parse_exp_in_context): Make first argument const.
1501 Remove the entire const_hack.
1502 (parse_exp_in_context_1): Make first argument const.
1503 * parser-defs.h (find_template_name_end): Return const.
1504 Make argument const, too.
1505 (lexptr): Make const.
1506 (prev_lexptr): Likewise.
1507 * utils.c (parse_escape): Make second argument const.
1508 * utils.h (parse_escape): Likewise.
1510 2013-10-01 Keith Seitz <keiths@redhat.com>
1512 * ada-exp.y (write_object_renaming): Update: struct stoken.ptr
1514 (block_lookup): Make 'raw_name' and 'name' const.
1515 * ada-lex.l (processString): Update for struct stoken.ptr.
1516 * c-exp.y (qualified_name : TYPENAME COLONCOLON '~' name): Likewise.
1517 (operator_stoken): Likewise.
1518 (lex_one_token): Remove temporary cast to char * for
1520 * f-exp.y (yylex): Likewise.
1521 * gdb-types.c (lookup_struct_elt_type): Make argument 'name' const.
1522 * gdbtypes.h (lookup_struct_elt_type): Likewisee.
1523 * go-exp.y (lex_one_token): Remove temporary cast to char * for
1525 * jv-exp.y (QualifiedName): Update for struct stoken.ptr.
1526 (yylex): Remove temporary cast to char * for 'yylval.sval.ptr'.
1527 * linespec.c (struct ls_parser): Make 'stream' const.
1528 (find_parameter_list_end): Make argument 'input' and local
1530 (linespec_lexer_lex_string): Make local variables 'start' and
1532 Use skip_spaces_const instead of skip_spaces.
1533 (linespec_lexer_peek_token): Make local variable 'saved_stream'
1535 (parse_linespec): Temporarily cast 'argptr' to const for
1536 'parser->lexer.stream'.
1537 * m2-exp.y (yylex): Remove temporary cast to char * for
1539 * objc-lang.c (add_msglist): Make local variable 'p' const.
1540 * p-exp.y (exp : exp '['): Update for struct stoken.ptr.
1541 (exp : STRING): Make 'sp' const.
1542 (parse_number): Make argument 'p' const.
1543 * parser-defs.h (struct stoken): Make 'ptr' const.
1545 2013-10-01 Doug Evans <dje@google.com>
1547 * cli/cli-decode.c: Remove unnecessary inclusion of tui/tui.h.
1549 2013-10-01 Yao Qi <yao@codesourcery.com>
1551 * varobj.c (c_value_of_root): Remove declaration.
1552 (cplus_value_of_root, java_value_of_root): Likewise.
1553 (ada_value_of_root): Likewise.
1554 (struct language_specific) <value_of_root>: Remove.
1555 (languages): Update initialization.
1556 (check_scope): Move earlier.
1557 (c_value_of_root): Move earlier and rename to ...
1558 (value_of_root_1): ... this.
1559 (value_of_root): Caller update.
1560 (cplus_value_of_root, java_value_of_root): Remove.
1561 (ada_value_of_root): Remove.
1563 2013-10-01 Yao Qi <yao@codesourcery.com>
1565 * varobj.c (varobj_format_string): Remove "unknown".
1566 (languages): Remove the first element.
1567 * varobj.h (enum varobj_languages): Remove vlang_c.
1569 2013-10-01 Yao Qi <yao@codesourcery.com>
1571 * varobj.c (struct language_specific) <language>: Remove.
1572 (languages): Update the initialization.
1574 2013-10-01 Yao Qi <yao@codesourcery.com>
1576 * arm-wince-tdep.c: Remove inclusion of "solib.h" and
1577 "solib-target.h". Include "windows-tdep.h".
1578 (arm_wince_init_abi): Call windows_init_abi. Remove call to
1579 set_solib_ops and set_gdbarch_has_dos_based_file_system.
1580 * configure.tgt (arm*-wince-pe | arm*-*-mingw32ce*): Append
1581 windows-tdep.o to gdb_target_obs.
1583 2013-10-01 Yao Qi <yao@codesourcery.com>
1585 * amd64-windows-tdep.c: Remove inclusion of "solib.h" and
1587 (amd64_windows_init_abi): Don't call set_solib_ops and
1588 set_gdbarch_iterate_over_objfiles_in_search_order. Call
1589 windows_init_abi instead.
1590 * i386-cygwin-tdep.c: Remove inclusion of "solib.h" and
1592 (i386_cygwin_init_abi): Don't call set_solib_ops,
1593 set_gdbarch_has_dos_based_file_system and
1594 set_gdbarch_iterate_over_objfiles_in_search_order. Call
1595 windows_init_abi instead.
1596 * windows-tdep.c: Include "solib.h" and "solib-target.h".
1597 (windows_init_abi): New function.
1598 (windows_iterate_over_objfiles_in_search_order): Make it
1600 * windows-tdep.h (windows_init_abi): Declare.
1601 (windows_iterate_over_objfiles_in_search_order): Remove
1604 2013-10-01 Jerome Guitton <guitton@adacore.com>
1606 Checked in by Joel Brobecker <brobecker@adacore.com>
1607 * system-gdbinit/elinos.py (get_elinos_environment): Return an
1608 incomplete dictionnary instead of None in case of missing
1609 environment variables.
1610 (elinos_init): in case of an incomplete environment, best
1611 effort to load system libraries instead of abort.
1613 2013-10-01 Joel Brobecker <brobecker@adacore.com>
1615 * ada-lang.c (ada_has_this_exception_support): Ignore
1616 mst_solib_trampoline minimal symbols.
1618 2013-09-30 Tristan Gingold <gingold@adacore.com>
1620 * i386-darwin-nat.c (darwin_complete_target): Install methods for
1621 hardware watchpoint.
1622 (i386_darwin_dr_set): Support 32 and 64 bit states.
1623 (i386_darwin_dr_get): Likewise.
1624 (i386_darwin_dr_set_control): Make static.
1625 (i386_darwin_dr_set_addr, i386_darwin_dr_get_addr)
1626 (i386_darwin_dr_get_status, i386_darwin_dr_get_control): Likewise.
1628 2013-09-30 Luis Machado <lgustavo@codesourcery.com>
1630 * aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid.
1631 Replace TIDGET with ptid_get_lwp.
1632 Replace GET_LWP with ptid_get_lwp.
1633 * aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove.
1634 Replace BUILD_THREAD with ptid_build.
1635 Replace BUILD_LWP with ptid_build.
1636 Replace PIDGET with ptid_get_pid.
1637 Replace TIDGET with ptid_get_lwp.
1638 * alphabsd-nat.c: Replace PIDGET with ptid_get_pid.
1639 * amd64-linux-nat.c: Replace PIDGET with ptid_get_pid.
1640 Replace TIDGET with ptid_get_lwp.
1641 * amd64bsd-nat.c: Replace PIDGET with ptid_get_pid.
1642 * arm-linux-nat.c: Replace PIDGET with ptid_get_pid.
1643 Replace TIDGET with ptid_get_lwp.
1644 Replace GET_LWP with ptid_get_lwp.
1645 * armnbsd-nat.c: Replace PIDGET with ptid_get_pid.
1647 * breakpoint.c: Likewise.
1648 * common/ptid.c (ptid_is_pid): Condense check for
1649 null_ptid and minus_one_ptid.
1650 (ptid_lwp_p): New function.
1651 (ptid_tid_p): New function.
1652 * common/ptid.h: Update comments for accessors.
1653 (ptid_lwp_p): New prototype.
1654 (ptid_tid_p): New prototype.
1655 * defs.h (PIDGET, TIDGET, MERGEPID): Do not define.
1656 * gcore.c: Replace PIDGET with ptid_get_pid.
1657 * gdbthread.h: Likewise.
1658 * gnu-nat.c: Likewise.
1659 * hppa-linux-nat.c: Replace PIDGET with ptid_get_pid.
1660 Replace TIDGET with ptid_get_lwp.
1661 * hppabsd-nat.c: Replace PIDGET with ptid_get_pid.
1662 * hppanbsd-nat.c: Likewise.
1663 * i386-linux-nat.c: Replace PIDGET with ptid_get_pid.
1664 Replace TIDGET with ptid_get_lwp.
1665 * i386bsd-nat.c: Replace PIDGET with ptid_get_pid.
1666 * ia64-linux-nat.c: Replace PIDGET with ptid_get_pid.
1667 * infcmd.c: Likewise.
1668 * inferior.h: Likewise.
1669 * inflow.c: Likewise.
1670 * infrun.c: Likewise.
1671 * linux-fork.c: Likewise.
1672 * linux-nat.c: Replace PIDGET with ptid_get_pid.
1673 Replace GET_PID with ptid_get_pid.
1674 Replace is_lwp with ptid_lwp_p.
1675 Replace GET_LWP with ptid_get_lwp.
1676 Replace BUILD_LWP with ptid_build.
1678 2013-09-28 Mike Frysinger <vapier@gentoo.org>
1680 * common/linux-btrace.c: Move sys/syscall.h out of the
1681 HAVE_LINUX_PERF_EVENT_H check and wrap it in HAVE_SYS_SYSCALL_H.
1682 Also check for SYS_perf_event_open before attempting to buid.
1684 2013-09-27 Doug Evans <dje@google.com>
1686 * dwarf2read.c (dwarf2_section_info): Add comment.
1687 (dwp_file): Split loaded_cutus into loaded_cus, loaded_tus.
1689 (dwarf2_section_empty_p): Rename arg from "info" to "section".
1690 (dwarf2_read_section): Delete unused local "header". Add section
1691 name to error message.
1692 (create_dwo_in_dwp): Tweak comment.
1693 (MAX_NR_DWO_SECTIONS): Combine count of .debug_macro + .debug_macinfo.
1695 * dwarf2read.c (die_reader_specs): Tweak comment.
1696 (get_section_bfd_owner, get_section_bfd_section): New functions.
1697 (get_section_name, get_section_file_name): New functions.
1698 (get_section_id, get_section_flags): New functions.
1699 (*): Use new functions to access section fields.
1701 * dwarf2read.c (struct dwo_file): Add/tweak comments.
1702 (lookup_dwo_unit_in_dwp): Renamed from lookup_dwo_in_dwp. Remove
1703 arg "htab". All callers updated.
1704 (create_debug_types_hash_table): Remove redundant copy of
1706 (create_dwo_in_dwp): Tweak comments.
1707 (read_str_index): Tweak comment. Record dwarf form name in static
1710 2013-09-27 Pedro Alves <palves@redhat.com>
1712 * remote.h (REMOTE_SYSROOT_PREFIX): New define.
1713 (remote_filename_p): Add comment.
1714 * remote.c (remote_filename_p): Adjust to use
1715 REMOTE_SYSROOT_PREFIX.
1716 * solib.c (solib_find): When deciding whether we need to add a
1717 directory separator, check whether the sysroot is "remote:"
1718 instead of checking whether the patch has a drive spec. Add
1721 2013-09-27 Pedro Alves <palves@redhat.com>
1723 * remote.c (struct stop_reply) <solibs_changed, replay_event>:
1725 (remote_parse_stop_reply): Adjust, setting event->ws.kind
1728 2013-09-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1730 Fix set debug frame output.
1731 * frame.c (fprint_frame_type): Add TAILCALL_FRAME entry. Move
1732 SENTINEL_FRAME entry lower to match enum frame_type order.
1734 2013-09-26 Pierre Muller <muller@sourceware.org>
1736 Replace constant values 8 to 15 by AMD64_R8_REGNUM to
1737 AMD64_R15_REGNUM when a register index is expected.
1738 * amd64-windows-tdep.c (amd64_windows_dummy_call_integer_regs):
1739 Substitute in array.
1740 * amd64-tdep.c (amd64_dwarf_regmap): Ditto.
1741 (amd64_push_arguments): Substitute in integer_regnum array.
1743 2013-09-25 Doug Evans <dje@google.com>
1745 * objfiles.c (allocate_objfile): Move comment to better place.
1747 New option "set debug symfile on".
1748 * NEWS: Mention "set debug symfile".
1749 * Makefile.in (SFILES): Add symfile-debug.c.
1750 (COMMON_OBS): Add symfile-debug.o.
1751 * elfread.c (elf_symfile_read): Use objfile_set_sym_fns to set the
1752 objfile's symbol functions.
1753 * objfiles.h (objfile_set_sym_fns): Declare.
1754 * symfile-debug.c: New file.
1755 * symfile.c (syms_from_objfile_1): Use objfile_set_sym_fns to set the
1756 objfile's symbol functions.
1757 (reread_symbols): Ditto.
1759 * symfile.h (struct sym_fns): Delete member "sym_flavour".
1761 (add_symtab_fns): Update prototype.
1762 * symfile.c (sym_fns_ptr): Delete. Replace with ...
1763 (registered_sym_fns): ... this.
1764 (symtab_fns): Update.
1765 (add_symtab_fns): New arg "flavour". All callers updated.
1766 (find_sym_fns): Rewrite to use new sym_fns registry.
1768 * symfile.h (struct sym_fns): Add "objfile" argument to
1769 sym_read_linetable. All uses updated.
1771 * symtab.c (domain_name, search_domain_name): New functions.
1772 * symtab.h (domain_name, search_domain_name): Declare.
1774 * symfile.h (struct quick_symbol_functions): Reorg arg list of
1775 map_matching_symbols so objfile is first. All uses updated.
1776 * dwarf2read.c (dw2_map_matching_symbols): Update signature.
1777 * psymtab.c (map_matching_symbols_psymtab): Update signature.
1779 2013-09-25 Andreas Arnez <arnez@linux.vnet.ibm.com>
1782 * solib-svr4.c (svr4_read_so_list): Skip the vDSO when reading
1785 2013-09-24 Doug Evans <dje@google.com>
1787 * objfiles.c (free_objfile): Move comment.
1789 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1791 * ada-exp.y (string_to_operator): Delete.
1792 (dummy_string_to_ada_operator): Delete.
1794 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1797 * i386-tdep.h (enum amd64_reg_class): New, moved here from
1799 (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs,
1800 call_dummy_integer_regs, and classify.
1801 * amd64-tdep.h (amd64_classify): Add declaration.
1802 * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant.
1803 (amd64_reg_class): Delete, moved to i386-tdep.h.
1804 (amd64_classify): Make non-static. Move declaration to amd64-tdep.h.
1805 Replace call to amd64_classify by call to tdep->classify.
1806 (amd64_push_arguments): Get the list of registers to use for
1807 passing integer parameters from the gdbarch tdep structure,
1808 rather than using a hardcoded one. Replace calls to amd64_classify
1809 by calls to tdep->classify.
1810 (amd64_push_dummy_call): Get the register number used for
1811 the "hidden" argument from tdep->call_dummy_integer_regs.
1812 (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs
1813 and tdep->call_dummy_integer_regs. Set tdep->classify.
1815 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1818 * i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer.
1819 * amd64-tdep.c (amd64_push_arguments): Add handling of architectures
1820 where tdep->memory_args_by_pointer is non-zero.
1822 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1825 * i386-tdep.h (struct gdbarch_tdep): Add new field
1826 integer_param_regs_saved_in_caller_frame.
1827 * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on
1828 stack if tdep->integer_param_regs_saved_in_caller_frame is set.
1830 2013-09-24 Joel Brobecker <brobecker@adacore.com>
1832 * amd64-windows-tdep.c: #include "value.h"
1833 (amd64_windows_classify): Delete.
1834 (amd64_windows_passed_by_integer_register)
1835 (amd64_windows_passed_by_xmm_register)
1836 (amd64_windows_passed_by_pointer)
1837 (amd64_windows_adjust_args_passed_by_pointer)
1838 (amd64_windows_store_arg_in_reg, amd64_windows_push_arguments)
1839 (amd64_windows_push_dummy_call): New functions.
1840 (amd64_windows_init_abi): Remove setting of
1841 tdep->call_dummy_num_integer_regs, tdep->call_dummy_integer_regs,
1842 tdep->classify, tdep->memory_args_by_pointer and
1843 tdep->integer_param_regs_saved_in_caller_frame.
1844 Add call to set_gdbarch_push_dummy_call.
1846 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1848 * dwarf2read.c (open_and_init_dwp_file): Try open_dwp_file also with
1849 objfile->original_name.
1851 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1853 Pass down original filename for objfile.
1854 * coffread.c (coff_symfile_read): Update symbol_file_add_separate call.
1855 * elfread.c (elf_symfile_read): Likewise.
1856 * jit.c (jit_object_close_impl): Update allocate_objfile call, no
1857 longer set ORIGINAL_NAME.
1858 (jit_bfd_try_read_symtab): Update symbol_file_add_from_bfd call.
1859 * jv-lang.c (get_dynamics_objfile): Update allocate_objfile call.
1860 * machoread.c (macho_add_oso_symfile): Add parameter name. Update
1861 symbol_file_add_from_bfd call.
1862 (macho_symfile_read_all_oso): Update two macho_add_oso_symfile calls.
1863 (macho_check_dsym): Add parameter filenamep. Change function comment.
1865 (macho_symfile_read): New variable dsym_filename. Update
1866 macho_check_dsym call. Use it for symbol_file_add_separate.
1867 * objfiles.c (allocate_objfile): Add parameter name. New comment for
1868 it. Use it for objfile->original_name.
1869 (objfile_name): Return OBFD's filename, if available.
1870 * objfiles.h (allocate_objfile): Add new parameter name.
1871 * solib.c (solib_read_symbols): Update symbol_file_add_from_bfd call.
1872 * symfile-mem.c (symbol_file_add_from_memory): Update
1873 symbol_file_add_from_bfd call.
1874 * symfile.c (read_symbols): Update symbol_file_add_separate call, new
1876 (symbol_file_add_with_addrs): New parameter name, add function comment
1877 for it. Remove variable name. Update allocate_objfile call.
1878 (symbol_file_add_separate): New parameter name, add function comment
1879 for it. Update symbol_file_add_with_addrs call.
1880 (symbol_file_add_from_bfd): New parameter name. Update
1881 symbol_file_add_with_addrs call.
1882 (symbol_file_add): Update symbol_file_add_from_bfd call.
1883 (reread_symbols): New variable original_name. Save
1884 objfile->original_name by it.
1885 * symfile.h (symbol_file_add_from_bfd, symbol_file_add_separate): Add
1888 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1890 Code cleanup: Add objfile_name accessor function.
1891 * ada-lang.c (is_known_support_routine): Use objfile_name.
1892 * auto-load.c (source_gdb_script_for_objfile)
1893 (auto_load_objfile_script): Likewise.
1894 * coffread.c (coff_symtab_read, read_one_sym): Likewise.
1895 * dbxread.c (dbx_symfile_read): Likewise.
1896 * dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
1897 * dwarf2loc.c (locexpr_describe_location_piece): Likewise.
1898 * dwarf2read.c (dwarf2_get_dwz_file, dwarf2_read_index)
1899 (dw2_symtab_iter_next, dw2_expand_symtabs_matching)
1900 (lookup_dwp_signatured_type, lookup_dwo_unit)
1901 (dwarf2_build_psymtabs_hard, scan_partial_symbols, process_queue)
1902 (fixup_go_packaging, process_imported_unit_die, dwarf2_physname)
1903 (read_import_statement, create_dwo_cu, open_and_init_dwp_file)
1904 (lookup_dwo_cutu, read_call_site_scope, dwarf2_ranges_read)
1905 (dwarf2_record_block_ranges, read_common_block, read_typedef)
1906 (read_subrange_type, load_partial_dies, read_partial_die)
1907 (read_addr_index_1, read_str_index, dwarf_decode_lines_1)
1908 (die_containing_type, build_error_marker_type, lookup_die_type)
1909 (follow_die_ref_or_sig, follow_die_ref, dwarf2_fetch_die_loc_sect_off)
1910 (dwarf2_fetch_constant_bytes, follow_die_sig, get_signatured_type)
1911 (get_DW_AT_signature_type, write_psymtabs_to_index)
1912 (save_gdb_index_command): Likewise.
1913 * elfread.c (find_separate_debug_file_by_buildid, elf_symfile_read):
1915 * expprint.c (dump_subexp_body_standard): Likewise.
1916 * gdbtypes.c (type_name_no_tag_or_error): Likewise.
1917 * jit.c (jit_object_close_impl): Use the objfile field name renamed to
1919 * linux-thread-db.c (try_thread_db_load_from_pdir_1): New variable
1920 obj_name, use objfile_name for it, use the variable.
1921 (try_thread_db_load_from_pdir, has_libpthread, thread_db_new_objfile):
1923 * machoread.c (macho_symtab_read, macho_check_dsym)
1924 (macho_symfile_relocate): Likewise.
1925 * maint.c (maintenance_translate_address): Likewise.
1926 * minidebug.c (find_separate_debug_file_in_section): Likewise.
1927 * minsyms.c (install_minimal_symbols): Likewise.
1928 * objfiles.c (allocate_objfile): Use the objfile field name renamed to
1930 (filter_overlapping_sections): Use objfile_name.
1931 (objfile_name): New function.
1932 * objfiles.h (struct objfile): Rename field name to original_name.
1933 (objfile_name): New prototype.
1934 * printcmd.c (sym_info, address_info): Use objfile_name.
1935 * probe.c (parse_probes, collect_probes, compare_probes)
1936 (info_probes_for_ops): Likewise.
1937 * progspace.c (clone_program_space): Likewise.
1938 * psymtab.c (require_partial_symbols, dump_psymtab, allocate_psymtab)
1939 (maintenance_info_psymtabs): Likewise.
1940 * python/py-auto-load.c (gdbpy_load_auto_script_for_objfile)
1941 (source_section_scripts): Likewise.
1942 * python/py-objfile.c (objfpy_get_filename): Likewise.
1943 * python/py-progspace.c (pspy_get_filename): Likewise.
1944 * solib-aix.c (solib_aix_get_toc_value): Likewise.
1945 * solib-som.c (match_main, som_solib_section_offsets): Likewise.
1946 * solib.c (solib_read_symbols): Likewise.
1947 * stabsread.c (scan_file_globals): Likewise.
1948 * stap-probe.c (handle_stap_probe): Likewise.
1949 * symfile.c (symbol_file_clear, separate_debug_file_exists)
1950 (find_separate_debug_file_by_debuglink): Likewise.
1951 (reread_symbols): Likewise. Use the objfile field name renamed to
1953 (allocate_symtab): Use objfile_name.
1954 * symmisc.c (print_symbol_bcache_statistics, print_objfile_statistics)
1955 (dump_objfile, dump_msymbols, dump_symtab_1)
1956 (maintenance_print_msymbols, maintenance_print_objfiles)
1957 (maintenance_info_symtabs, maintenance_check_symtabs): Likewise.
1958 * target.c (target_translate_tls_address, target_info): Likewise.
1959 * xcoffread.c (xcoff_initial_scan): Make variable name const. Use
1962 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1965 * probe.c (parse_probes): Rename variable objfile_name to
1968 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1970 Remove solib-sunos.c.
1971 * Makefile.in (ALLDEPFILES): Remove solib-sunos.c.
1972 * config/m68k/obsd.mh (NATDEPFILES): Remove solib-sunos.o.
1973 * objfiles.c (rt_common_objfile): Remove.
1974 (free_objfile): Remove rt_common_objfile comparison.
1975 * objfiles.h (rt_common_objfile): Remove.
1976 * solib-sunos.c: Remove.
1977 * symfile.c (reread_symbols): Remove solib-sunos.c comment.
1979 2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1981 Remove a.out NetBSD and OpenBSD hosts.
1982 * NEWS (Removed native configurations): New.
1983 * config/arm/nbsdaout.mh: Remove.
1984 * config/i386/nbsdaout.mh: Remove.
1985 * config/i386/obsdaout.mh: Remove.
1986 * config/m68k/nbsdaout.mh: Remove.
1987 * config/sparc/nbsdaout.mh: Remove.
1988 * config/vax/nbsdaout.mh: Remove.
1989 * configure.host (arm*-*-netbsd*, i[34567]86-*-netbsd*)
1990 (i[34567]86-*-openbsd[0-2].*, i[34567]86-*-openbsd3.[0-3])
1991 (m68*-*-netbsd*, sparc-*-netbsd*, vax-*-netbsd*): Add them to obsolete
1993 (arm*-*-netbsd*, i[34567]86-*-netbsd*, i[34567]86-*-openbsd[0-2].*)
1994 (i[34567]86-*-openbsd3.[0-3], m68*-*-netbsd*, sparc-*-netbsdaout*)
1995 (sparc-*-netbsd*, vax-*-netbsd*): Remove.
1997 2013-09-23 Tom Tromey <tromey@redhat.com>
1999 * linespec.c (struct minsym_and_objfile): Remove.
2000 (minsym_and_objfile_d): Remove.
2001 (struct linespec, struct collect_info, linespec_parse_basic)
2002 (convert_linespec_to_sals, linespec_parser_delete, decode_objc)
2003 (compare_msymbols, find_method, find_function_symbols)
2004 (find_linespec_symbols, struct collect_minsyms, compare_msyms)
2005 (add_minsym, search_minsyms_for_name): Update.
2007 2013-09-23 Andrew Burgess <aburgess@broadcom.com>
2009 * regcache.c: Add include of valprint.h.
2010 (dump_endian_bytes): Delete.
2011 (regcache_dump): Use print_hex_chars not dump_endian_bytes.
2013 2013-09-23 Andrew Burgess <aburgess@broadcom.com>
2015 * sh64-tdep.c (sh64_do_fp_register): Use print_hex_chars.
2017 2013-09-19 Pedro Alves <palves@redhat.com>
2019 * breakpoint.c (remove_threaded_breakpoints): Skip non-user
2022 2013-09-19 Pedro Alves <palves@redhat.com>
2023 Thomas Schwinge <thomas@codesourcery.com>
2024 Yue Lu <hacklu.newborn@gmail.com>
2026 * gnu-nat.c (gnu_read_inferior, gnu_write_inferior): Make static.
2027 Take a gdb_byte pointer instead of a char pointer.
2029 * gnu-nat.c (gnu_xfer_memory): Adjust interface as
2030 gnu_xfer_partial helper.
2031 (gnu_xfer_partial): New function.
2032 (gnu_target): Don't install a deprecated_xfer_memory hook.
2033 Install a to_xfer_partial hook.
2035 2013-09-19 Jan Kratochvil <jan.kratochvil@redhat.com>
2038 * main.c (captured_main): Replace catch_command_errors by
2039 catch_command_errors_const. Twice.
2040 * symfile.c (symbol_file_add_main_1): Make args parameter const.
2041 (symbol_file_add): Make name parameter const.
2042 (symbol_file_add_main, symbol_file_add_main_1): Make args parameter const.
2043 (symfile_bfd_open): Make name parameter const, rename it to cname. Add
2044 variable name. Change their usage accordingly.
2045 * symfile.h (symbol_file_add, symfile_bfd_open): Make first parameter
2047 (symbol_file_add_main): Make args parameter const.
2049 2013-09-18 Raunaq Bathija <raunaq12@in.ibm.com>
2050 Ulrich Weigand <uweigand@de.ibm.com>
2052 * xcoffread.c (struct coff_symbol): Use CORE_ADDR as type
2054 (read_xcoff_symtab): Use CORE_ADDR as type of fcn_start_addr.
2056 2013-09-18 Pedro Alves <palves@redhat.com>
2057 Yue Lu <hacklu.newborn@gmail.com>
2059 * gnu-nat.c (inf_validate_procs, gnu_wait, gnu_resume)
2060 (gnu_create_inferior)
2061 (gnu_attach, gnu_thread_alive, gnu_pid_to_str, cur_thread)
2062 (set_sig_thread_cmd): Use the lwpid field of ptids to
2063 store/extract thread ids instead of the tid field.
2064 * i386gnu-nat.c (gnu_fetch_registers): Adjust.
2066 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
2068 * infcmd.c (default_print_one_register_info): Add detection of
2069 optimized out values.
2070 (default_print_registers_info): Switch to using
2071 get_frame_register_value.
2073 2013-09-18 Markus Metzger <markus.t.metzger@intel.com>
2075 * infrun.c (handle_inferior_event): Check if we know the
2076 function start address before setting a resume breakpoint.
2078 2013-09-18 Pedro Alves <palves@redhat.com>
2080 * gnu-nat.c (set_sig_thread_cmd): Compare the thread's ptid to
2081 minus_one_ptid instead of looking at the ptid's tid field and
2082 comparing that to -1.
2084 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
2086 * main.h (get_gdb_program_name): Remove extra whitespace.
2088 2013-09-18 Andrew Burgess <aburgess@broadcom.com>
2090 * main.h (get_gdb_program_name): Add declaration.
2091 * main.c (get_gdb_program_name): Add definition.
2093 2013-09-17 Doug Evans <dje@google.com>
2095 * dwarf2read.c: Move definitions of complaint functions to after
2096 forward declarations of local functions.
2098 2013-09-17 Muhammad Waqas <mwaqas@codesourcery.com>
2099 Pedro Alves <palves@redhat.com>
2102 * breakpoint.c (remove_threaded_breakpoints): New function.
2103 (_initialize_breakpoint): Attach remove_threaded_breakpoints
2104 as thread_exit observer.
2106 2013-09-17 Pedro Alves <palves@redhat.com>
2109 * ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
2110 * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
2111 * corelow.c (core_open):
2112 * frame.h (print_stack_frame, print_frame_info): New
2113 'set_current_sal' parameter.
2114 * infcmd.c (finish_command, kill_command): Adjust call to
2116 * inferior.c (inferior_command): Likewise.
2117 * infrun.c (normal_stop): Likewise.
2118 * linux-fork.c (linux_fork_context): Likewise.
2119 * record-full.c (record_full_goto_entry, record_full_restore):
2121 * remote-mips.c (common_open): Likewise.
2122 * stack.c (print_stack_frame): New 'set_current_sal' parameter.
2124 (print_frame_info): New 'set_current_sal' parameter. Set the last
2125 displayed sal depending on the new paremeter instead of looking at
2127 (backtrace_command_1, select_and_print_frame, frame_command)
2128 (current_frame_command, up_command, down_command): Adjust call to
2130 * thread.c (print_thread_info, restore_selected_frame)
2131 (do_captured_thread_select): Adjust call to print_stack_frame.
2132 * tracepoint.c (tfind_1): Likewise.
2133 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
2134 (mi_cmd_stack_info_frame): Likewise.
2135 * mi/mi-interp.c (mi_on_normal_stop): Likewise.
2136 * mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.
2138 2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
2140 * value.c (isvoid_internal_fn): Replace "parameter" with
2143 2013-09-16 Stan Shebs <stan@codesourcery.com>
2145 * README: Update references to writing code for GDB.
2146 * configure.ac (build_warnings): Remove obsolete comment.
2147 * configure: Regenerate.
2148 * gdbarch.sh: Remove references to gdbint.texinfo.
2149 * gdbarch.h: Regenerate.
2150 * gdbtypes.c (objfile_type): Remove comments referencing internals
2153 2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
2155 * NEWS: Mention new convenience function $_isvoid.
2156 * value.c (isvoid_internal_fn): New function.
2157 (_initialize_values): Add new convenience function $_isvoid.
2159 2013-09-16 Pierre Muller <muller@sourceware.org>
2161 * arm-linux-tdep.c: Add "elf/common.h" header.
2162 Remove AT_HWCAP macro definintion as it is provided in
2164 * s390-tdep.c: Remove system header <elf.h>
2165 Add "elf/common.h" header for AT_HWCAP definition.
2166 (s390_core_read_description): Use correct CORE_ADDR
2167 for hwcap local variable used as third parameter
2168 of function target_auxv_search.
2170 2013-09-14 Pierre Muller <muller@sourceware.org>
2171 Tom Tromey <tromey@redhat.com>
2172 Pedro Alves <palves@redhat.com>
2174 * common/filestuff.c (gdb_fopen_cloexec): Do not try to use "e"
2175 mode if operating system doesn't know O_CLOEXEC.
2177 2013-09-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2180 * symfile.c (reread_symbols): Move variable obfd_filename to a more
2183 2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
2185 * NEWS: Mention TDB support.
2186 * features/s390-tdb.xml: New file.
2187 * features/s390-te-linux64.xml: New file.
2188 * features/s390x-te-linux64.xml: New file.
2189 * features/Makefile (WHICH): Add new tdescs above.
2190 (s390-te-linux64-expedite): Set.
2191 (s390x-te-linux64-expedite): Set.
2192 * features/s390-te-linux64.c: New file (generated).
2193 * features/s390x-te-linux64.c: New file (generated).
2194 * regformats/s390-te-linux64.dat: New file (generated).
2195 * regformats/s390x-te-linux64.dat: New file (generated).
2196 * s390-tdep.h (HWCAP_S390_HIGH_GPRS): Define.
2197 (HWCAP_S390_TE): Likewise.
2198 (S390_TDB_DWORD0_REGNUM): Likewise.
2199 (S390_TDB_DWORD0_REGNUM): Likewise.
2200 (S390_TDB_ABORT_CODE_REGNUM): Likewise.
2201 (S390_TDB_CONFLICT_TOKEN_REGNUM): Likewise.
2202 (S390_TDB_ATIA_REGNUM): Likewise.
2203 (S390_TDB_R0_REGNUM): Likewise.
2204 (S390_TDB_R1_REGNUM): Likewise.
2205 (S390_TDB_R2_REGNUM): Likewise.
2206 (S390_TDB_R3_REGNUM): Likewise.
2207 (S390_TDB_R4_REGNUM): Likewise.
2208 (S390_TDB_R5_REGNUM): Likewise.
2209 (S390_TDB_R6_REGNUM): Likewise.
2210 (S390_TDB_R7_REGNUM): Likewise.
2211 (S390_TDB_R8_REGNUM): Likewise.
2212 (S390_TDB_R9_REGNUM): Likewise.
2213 (S390_TDB_R10_REGNUM): Likewise.
2214 (S390_TDB_R11_REGNUM): Likewise.
2215 (S390_TDB_R12_REGNUM): Likewise.
2216 (S390_TDB_R13_REGNUM): Likewise.
2217 (S390_TDB_R14_REGNUM): Likewise.
2218 (S390_TDB_R15_REGNUM): Likewise.
2219 (S390_NUM_REGS): Increase.
2220 (S390_IS_TDBREGSET_REGNUM): New macro.
2221 (s390_regmap_tdb): Declare.
2222 (s390_sizeof_tdbregset): Define.
2223 (tdesc_s390_te_linux64): Declare.
2224 (tdesc_s390x_te_linux64): Likewise.
2225 * s390-tdep.c: Add includes for "auxv.h", <elf.h>,
2226 "features/s390-te-linux64.c", and "features/s390x-te-linux64.c".
2227 (s390_regmap_tdb): New regmap.
2228 (s390_supply_tdb_regset): New function.
2229 (s390_tdb_regset): New regset.
2230 (s390_linux64v2_regset_sections): Add TDB regset to list.
2231 (s390x_linux64v2_regset_sections): Likewise.
2232 (s390_regset_from_core_section): Recognize TDB core note section.
2233 (s390_core_read_description): If HWCAP indicates TE support,
2234 select tdesc_s390_te_linux64 or tdesc_s390_s390x_te_linux64.
2235 (s390_gdbarch_init): Handle TDB regset.
2236 (_initialize_s390_tdep): Initialize new tdescs.
2237 * s390-nat.c (HWCAP_S390_HIGH_GPRS): Remove define.
2238 (have_regset_tdb): New variable.
2239 (s390_native_supply): Support register invalidation.
2240 (fetch_regset): Invalidate registers if ptrace yields ENODATA.
2241 (check_regset): Treat ENODATA as "regset exists".
2242 (s390_linux_fetch_inferior_registers): Add TDB.
2243 (s390_read_description): Check for TDB existence and select
2245 * gdbserver/Makefile.in (clean): Add removal of new makefile
2247 (s390-te-linux64.c): New makefile target.
2248 (s390x-te-linux64.c): Likewise.
2249 * gdbserver/configure.srv (srv_regobj): Append new objects
2250 s390-te-linux64.o and s390x-te-linux64.o.
2251 (srv_xmlfiles): Append new files s390-te-linux64.xml,
2252 s390x-te-linux64.xml, and s390-tdb.xml.
2253 * gdbserver/linux-s390-low.c (init_registers_s390_te_linux64): New
2255 (tdesc_s390_te_linux64): Likewise.
2256 (init_registers_s390x_te_linux64): Likewise.
2257 (tdesc_s390x_te_linux64): Likewise.
2258 (s390_check_regset): Treat ENODATA as "regset exists".
2259 (s390_arch_setup): Add TDB regset support.
2260 (initialize_low_arch): Initialize registers for new tdescs.
2262 2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
2264 * s390-tdep.h (S390_IS_GREGSET_REGNUM): New macro.
2265 (S390_IS_FPREGSET_REGNUM): New macro.
2266 * s390-tdep.c (s390_dwarf_regmap): Make const.
2267 (regnum_is_gpr_full): New function for replacing repeated code.
2268 (s390_pseudo_register_name): Use it.
2269 (s390_pseudo_register_type): Likewise.
2270 (s390_pseudo_register_read): Likewise.
2271 (s390_pseudo_register_write): Likewise.
2272 (s390_unwind_pseudo_register): Likewise.
2273 (s390_regmap_gregset): New format for regmap.
2274 (s390x_regmap_gregset): Likewise.
2275 (s390_regmap_fpregset): Likewise.
2276 (s390_regmap_upper): Likewise.
2277 (s390_regmap_last_break): Likewise.
2278 (s390_regmap_system_call): Likewise.
2279 (s390_supply_regset): Adjust to new regmap format.
2280 (s390_collect_regset): Likewise.
2281 * s390-nat.c (s390_native_supply): Adjust to new regmap format.
2282 (s390_native_collect): Likewise.
2283 (supply_gregset): Likewise.
2284 (fill_gregset): Likewise.
2285 (supply_fpregset): Likewise.
2286 (fill_fpregset): Likewise.
2287 (fetch_regset): Likewise.
2288 (store_regset): Likewise.
2289 (s390_linux_fetch_inferior_registers): Likewise.
2290 (s390_linux_fetch_inferior_registers): Likewise.
2292 2013-09-12 Andrew Pinski <apinski@cavium.com>
2294 * aarch64-linux-nat.c (aarch64_linux_set_debug_regs): Zero out regs.
2296 2013-09-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
2298 * config/s390/s390.mh (NATDEPFILES): Add linux-waitpid.o.
2300 2013-09-09 Andrew Burgess <aburgess@broadcom.com>
2302 * top.c (quit_confirm): Remove use of deprecated_init_ui_hook.
2304 2013-09-06 Pedro Alves <palves@redhat.com>
2306 * remote-sim.c (dump_mem, gdbsim_fetch_register)
2307 (gdbsim_store_register, gdbsim_kill, gdbsim_load)
2308 (gdbsim_create_inferior, gdbsim_open, gdbsim_close)
2309 (gdbsim_detach, gdbsim_resume_inferior, gdbsim_wait)
2310 (gdbsim_files_info, gdbsim_mourn_inferior): Send debug output to
2313 2013-09-06 Pedro Alves <palves@redhat.com>
2315 * remote-sim.c (dump_mem): Constify buf parameter.
2316 gdbsim_xfer_inferior_memory): Rename to ...
2317 (gdbsim_xfer_memory): ... this. Adjust interface as
2318 target_xfer_partial helper.
2319 (gdbsim_xfer_partial): New function.
2320 (init_gdbsim_ops): Don't install a deprecated_xfer_memory hook.
2321 Install a to_xfer_partial hook. Send output to gdb_stdlog.
2323 2013-09-06 Pedro Alves <palves@redhat.com>
2325 * remote-sim.c (gdbsim_xfer_inferior_memory): Use
2326 host_address_to_string, and send debug output to gdb_stdlog.
2328 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
2330 * Makefile.in (ALL_TARGET_OBS): Add cris-linux-tdep.o.
2331 * configure.tgt: Add cris-linux-tdep.o and linux-tdep.o to
2332 gdb_target_obs for cris target.
2333 * cris-tdep.c (struct gdbarch_tdep): Move to cris-tdep.h.
2334 (cris_gdbarch_init): Move calls to
2335 set_gdbarch_fetch_tls_load_module_address and
2336 set_solib_svr4_fetch_link_map_offsets to cris-linux-tdep.c.
2337 Add call to gdbarch_init_osabi.
2338 * cris-linux-tdep.c: New file.
2339 * cris-tdep.h: New file.
2341 2013-09-06 Andrew Burgess <aburgess@broadcom.com>
2343 * tui/tui-io.c (tui_initialize_io): Remove legacy comment referring
2344 to deprecated_init_ui_hook.
2346 2013-09-06 Andrew Burgess <aburgess@broadcom.com>
2348 * cli/cli-interp.c (_initialize_cli_interp): Add a
2349 command_loop_proc to interp_procs.
2350 * event-top.c (cli_command_loop): Change signature to match
2351 interp_command_loop_ftype.
2352 * event-top.h (cli_command_loop): Same.
2353 * interps.c (interp_new): Require every interpreter to have a
2355 (current_interp_command_loop): Just call the command_loop_proc on
2356 the current interpreter.
2357 * tui/tui-interp.c (_initialize_tui_interp): Add a
2358 command_loop_proc to interp_procs.
2360 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
2362 * cris-tdep.c (cris_gdbarch_init): Add call to
2363 get_gdbarch_fetch_tls_load_module_address.
2365 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
2367 * cris-tdep.c (cris_elf_greg_t): Rename from elf_greg_t.
2368 (cris_elf_gregset_t): Rename from elf_gregset_t.
2369 (crisv32_elf_gregset_t): Adjust.
2370 (cris_supply_gregset, fetch_core_registers): Adjust.
2372 2013-09-06 Ricard Wanderlof <ricardw@axis.com>
2374 * cris-tdep.c (elf_greg_t): Change typedef to unsigned char[4]
2376 2013-09-05 Andrew Burgess <aburgess@broadcom.com>
2378 * defs.h (deprecated_command_loop_hook): Remove, including
2379 references in comments.
2380 * interps.c (current_interp_command_loop): No longer use
2381 deprecated_command_loop_hook.
2382 (clear_interpreter_hooks): Remove deprecated_command_loop_hook
2384 * top.c (deprecated_command_loop_hook): Remove.
2386 2013-09-05 Pedro Alves <palves@redhat.com>
2388 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): 'dwarf_regnum'
2389 local is now int instead of ULONGEST. Print it with %d
2390 instead of paddress.
2392 2013-09-05 Tristan Gingold <gingold@adacore.com>
2394 * MAINTAINERS: Remove avr maintainership.
2396 2013-09-05 Pedro Alves <palves@redhat.com>
2398 * findvar.c (value_of_register): Rework in terms of
2399 value_of_register_lazy.
2401 2013-09-05 Muhammad Bilal <mbilal@codesourcery.com>
2403 * symfile.c (add_symbol_file_command): Remove trailing
2404 whitespaces and blank line after comment.
2406 2013-09-05 Pedro Alves <palves@redhat.com>
2408 * tui/tui-regs.c (tui_register_format): Don't look at the
2409 register's name here. Return string representing register
2410 value instead of storing it in the data element.
2411 (tui_get_register): Compare register string representations
2412 instead of register value states and contents.
2414 2013-09-05 Pedro Alves <palves@redhat.com>
2417 * tui/tui-regs.c (tui_show_registers): Show registers of the
2418 selected frame, not the current frame.
2420 2013-09-05 Ricard Wanderlof <ricardw@axis.com>
2422 * MAINTAINERS (Write After Approval): Add myself to the list.
2424 2013-09-04 Doug Evans <dje@google.com>
2426 * dwarf2read.c (queue_and_load_all_dwo_tus): New function.
2427 (queue_and_load_dwo_tu): New function.
2428 (lookup_dwo_signatured_type): Set per_cu.tu_read.
2429 (maybe_queue_comp_unit): Rename this_cu argument to dependent_cu.
2430 Make dependent_cu optional.
2431 (dw2_do_instantiate_symtab): If we just loaded a CU from a DWO,
2432 and an older .gdb_index is in use, queue and load all its TUs too.
2434 2013-09-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2436 Code cleanup: Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH.
2437 * cli/cli-cmds.c (find_and_open_script): Add OPF_RETURN_REALPATH to
2438 variable search_flags.
2439 * defs.h (OPF_DISABLE_REALPATH): Rename to ...
2440 (OPF_RETURN_REALPATH): ... here.
2441 * dwarf2read.c (try_open_dwop_file): Set OPF_RETURN_REALPATH for flags.
2442 * exec.c (exec_file_attach): Remove OPF_DISABLE_REALPATH from openp
2444 * nto-tdep.c (nto_find_and_open_solib): Add OPF_RETURN_REALPATH for
2446 * solib.c (solib_find): Likewise. Four times.
2447 * source.c (openp): Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH
2448 in the function comment and for the realpath_fptr variable.
2449 (source_full_path_of): Add OPF_RETURN_REALPATH for openp call.
2450 (find_and_open_source): Likewise. Twice.
2451 * symfile.c (symfile_bfd_open): Likewise, also twice.
2453 2013-09-04 Doug Evans <dje@google.com>
2455 * progspace.c (save_current_space_and_thread): Remove unnecessary
2456 call to save_current_inferior.
2458 2013-09-04 Andrew Burgess <aburgess@broadcom.com>
2460 * sh64-tdep.c (sh64_do_register): Return after printing message
2461 about unavailable register contents.
2463 2013-09-04 Muhammad Bilal <mbilal@codesourcery.com>
2464 Pedro Alves <palves@redhat.com>
2466 * symfile.c (add_symbol_file_command): Error out on unknown
2467 option. Handle EXPECTING_SEC_ADDR/EXPECTING_SEC_NAME before '-'
2468 options and collapse into single conditional branch.
2470 2013-09-03 Luis Machado <lgustavo@codesourcery.com>
2472 * inf-child.c (inf_child_follow_fork): New parameter
2474 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise.
2475 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
2476 * inferior.h (detach_fork): Remove.
2477 * infrun.c (detach_fork): Adjust comment and make it
2479 (follow_fork): Pass detach_fork parameter to
2481 * linux-nat.c (linux_child_follow_fork): New parameter
2483 * target.c (target_follow_fork): New parameter detach_fork.
2484 Pass detach_fork as parameter and print its value.
2485 * target.h (struct target_ops) <to_follow_fork>: New int
2487 (target_follow_fork): New parameter detach_fork.
2489 2013-09-03 Joel Brobecker <brobecker@adacore.com>
2491 * solib-ia64-hpux.c (ia64_hpux_relocate_section_addresses):
2492 Replace sec->bfd by sec->the_bfd_section->owner.
2494 2013-09-03 Yao Qi <yao@codesourcery.com>
2496 * linux-tdep.c (linux_is_uclinux): New function. Code moved
2497 from linux_has_shared_address_space.
2498 (linux_has_shared_address_space): Call linux_is_uclinux.
2499 * linux-tdep.h (linux_is_uclinux): Declare.
2500 * m68klinux-tdep.c (m68k_linux_get_sigtramp_info): Call
2503 2013-09-03 Yao Qi <yao@codesourcery.com>
2505 * config/djgpp/fnchange.lst: Remove entry of
2506 i386-interix-nat.c and i386-interix-tdep.c.
2507 * configure.ac: Remove '*-*-interix*'.
2508 * configure: Re-generated.
2509 * defs.h (enum gdb_osabi): Remove GDB_OSABI_INTERIX.
2510 * i386-cygwin-tdep.c (i386_cygwin_osabi_sniffer): Remove
2512 * osabi.c (gdb_osabi_names): Remove "Interix".
2514 2013-09-03 Yao Qi <yao@codesourcery.com>
2516 * arch-utils.c: Fix typo in the comment to gdbarch_update_p.
2518 2013-09-02 Markus Metzger <markus.t.metzger@intel.com>
2520 * record.h (record_print_flag) <record_print_src_line,
2521 record_print_insn_range>: Rename into ...
2522 (record_print_flag) <record_print_src_line,
2523 record_print_insn_range>: ... this. Update all users.
2525 2013-09-02 Pierre Muller <muller@sourceware.org>
2527 * windows-nat.c (windows_xfer_memory): Handle ERROR_PARTIAL_COPY
2530 2013-09-02 Pierre Muller <muller@sourceware.org>
2532 * windows-nat.c (windows_xfer_memory): Fix compilation failure
2533 by use of plongest function.
2535 2013-09-02 Tristan Gingold <gingold@adacore.com>
2537 * NEWS: Add entry mentioning support for native Windows x64
2540 * amd64-windows-tdep.c: #include "objfiles.h", "frame-unwind.h",
2541 "coff/internal.h", "coff/i386.h", "coff/pe.h" and "libcoff.h".
2542 (struct amd64_windows_frame_cache): New struct.
2543 (amd64_windows_w2gdb_regnum): New global.
2544 (pc_in_range, amd64_windows_frame_decode_epilogue)
2545 (amd64_windows_frame_decode_insns, amd64_windows_find_unwind_info)
2546 (amd64_windows_frame_cache, amd64_windows_frame_prev_register)
2547 (amd64_windows_frame_this_id): New functions.
2548 (amd64_windows_frame_unwind): New static global.
2549 (amd64_windows_skip_prologue): New function.
2550 (amd64_windows_init_abi): Call frame_unwind_prepend_unwinder
2551 with amd64_windows_frame_unwind. Call set_gdbarch_skip_prologue
2552 with amd64_windows_skip_prologue.
2554 2013-08-30 Joel Brobecker <brobecker@adacore.com>
2558 2013-08-30 Pedro Alves <palves@redhat.com>
2560 * mi/mi-main.c (mi_cmd_trace_find): Use LOC_AND_ADDRESS instead of
2563 2013-08-30 Pedro Alves <palves@redhat.com>
2565 * thread.c (restore_selected_frame): Use SRC_AND_LOC, and change
2568 2013-08-30 Pedro Alves <palves@redhat.com>
2570 * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
2571 Adjust arguments to print_stack_frame.
2573 2013-08-30 Pedro Alves <palves@redhat.com>
2575 * ada-tasks.c (task_command_1): Write SRC_AND_LOC instead '1'.
2577 2013-08-30 Pedro Alves <palves@redhat.com>
2579 * frame.h (show_and_print_stack_frame): Delete declaration.
2581 2013-08-30 Phil Muldoon <pmuldoon@redhat.com>
2584 * python/py-arch.c (ARCHPY_REQUIRE_VALID): New macro.
2585 (archpy_name): Check for valid architecture.
2586 (archpy_disassemble): Ditto.
2588 2013-08-29 Joel Brobecker <brobecker@adacore.com>
2590 * rs6000-nat.c (rs6000_ptrace32): Cast "addr" to "uintptr_t"
2591 instead of "long long" in call to ptrace64.
2593 2013-08-29 Andrew Burgess <aburgess@broadcom.com>
2595 * mi/mi-interp.c (mi_command_loop): Change signature to match
2596 interp_command_loop_ftype.
2597 (mi1_command_loop): Remove.
2598 (mi2_command_loop): Remove.
2599 (mi3_command_loop): Remove.
2600 (mi_interpreter_resume): Remove setting of
2601 deprecated_command_loop_hook.
2602 (_initialize_mi_interp): Set mi_command_loop as the command loop
2605 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
2607 * valops.c (do_search_struct_field): Pass v2 instead of base_type to
2610 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
2612 * value.c (allocate_value_contents): Make static.
2613 * value.h (allocate_value_contents): Remove prototype.
2615 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
2617 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use value_at_lazy instead
2618 of assembling value via allocate_value_lazy and attribute setter.
2619 * findvar.c (default_read_var_value): Use value_at_lazy instead of
2620 assembling value via allocate_value_lazy and attribute setter.
2621 * valops.c (do_search_struct_field): Use value_at_lazy instead of
2622 assembling value via allocate_value_lazy and attribute setter.
2624 2013-08-29 Sanimir Agovic <sanimir.agovic@intel.com>
2626 * value.c (value_from_contents_and_address): Replace allocate_value and
2627 memcpy with value_from_contents.
2629 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
2631 * python/py-framefilter.c (py_print_frame): Remove usage of
2632 PyString_AsString. Use python_string_to_host_string instead.
2633 Refactor function to work with a string as a new allocation
2634 instead of a pointer.
2635 (py_print_frame): Ditto.
2636 * python/lib/gdb/frames.py (return_list): Cain iterators together
2637 instead of adding them as a list.
2638 (_sort_list): Call return_list, and remove duplicate code.
2639 (execute_frame_filters): Convert iterator to a list with list().
2640 * python/lib/gdb/command/frame_filters.py
2641 (SetFrameFilterPriority._set_filter_priority): Convert priority
2642 attribute to an integer.
2643 * python/lib/gdb/FrameIterator.py (FrameIterator.next): Define
2644 wrapper function __next__.
2645 * python/lib/gdb/FrameDecorator.py: If basestring not defined,
2648 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
2651 * python/py-framefilter.c (apply_frame_filter): Check
2652 gdb_python_initialized. Exit if the Python frame-filter code
2653 cannot be initialized.
2655 2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
2658 * top.c (print_gdb_version): Remove erroneous newline after help
2661 2013-08-29 Yao Qi <yao@codesourcery.com>
2663 * varobj.c (install_dynamic_child): Remove trailing space.
2664 Add one blank line after variable declaration.
2666 2013-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2669 * corefile.c (get_exec_file): Use exec_filename.
2670 * defs.h (OPF_DISABLE_REALPATH): New definition. Add new comment.
2671 * exec.c (exec_close): Free EXEC_FILENAME.
2672 (exec_file_attach): New variable canonical_pathname. Use
2673 OPF_DISABLE_REALPATH. Call gdb_realpath explicitly. Set
2675 * exec.h (exec_filename): New.
2676 * inferior.c (print_inferior, inferior_command): Use
2677 PSPACE_EXEC_FILENAME.
2678 * mi/mi-main.c (print_one_inferior): Likewise.
2679 * progspace.c (clone_program_space, print_program_space): Likewise.
2680 * progspace.h (struct program_space): New field pspace_exec_filename.
2681 * source.c (openp): Describe OPF_DISABLE_REALPATH. New variable
2682 realpath_fptr, initialize it from OPF_DISABLE_REALPATH, use it.
2684 2013-08-28 Will Newton <will.newton@linaro.org>
2686 * common/linux-ptrace.c: Include stdint.h unconditionally.
2688 2013-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2691 * nto-tdep.c (nto_find_and_open_solib): Use OPF_TRY_CWD_FIRST.
2693 2013-08-28 Yao Qi <yao@codesourcery.com>
2694 Pedro Alves <palves@redhat.com>
2696 * event-top.c (gdb_setup_readline): Call stderr_fileopen
2697 instead of stdio_fileopen.
2698 * main.c (captured_main) [__MINGW32__]: Set stderr unbuffered.
2699 .Call stderr_fileopen instead of stdio_fileopen.
2700 * ui-file.c [__MINGW32__] (stderr_file_write): New function.
2701 [__MINGW32__] (stderr_file_fputs): New function.
2702 (stderr_fileopen): New function.
2703 * ui-file.h (stderr_fileopen): Declare.
2705 2013-08-27 Doug Evans <dje@google.com>
2707 * dwarf2read.c (struct dwarf2_cu): Tweak comment.
2708 (struct dwarf2_per_cu_data): Ditto.
2709 (maybe_queue_comp_unit): Delete forward decl. Add comment.
2710 (process_imported_unit_die): Ditto.
2711 (follow_die_sig_1): Simplify assert.
2713 2013-08-27 Pedro Alves <palves@redhat.com>
2715 * windows-nat.c (windows_xfer_memory): Adjust prototype to follow
2716 xfer_partial's interface. Return TARGET_XFER_E_IO on error.
2717 (windows_xfer_partial): Defer TARGET_OBJECT_MEMORY handling to
2718 windows_xfer_memory directly.
2719 (init_windows_ops): Don't install a deprecated_xfer_memory method.
2721 2013-08-27 Pedro Alves <palves@redhat.com>
2723 * darwin-nat.c (darwin_xfer_memory): Delete.
2724 (_initialize_darwin_inferior): Don't install a
2725 deprecated_xfer_memory method.
2727 2013-08-27 Pedro Alves <pedro@codesourcery.com>
2728 Yao Qi <yao@codesourcery.com>
2730 * mi/mi-cmd-stack.c (list_args_or_locals): Adjust prototype.
2731 (parse_no_frames_option): Remove.
2732 (mi_cmd_stack_list_locals): Handle --skip-unavailable.
2733 (mi_cmd_stack_list_args): Adjust.
2734 (mi_cmd_stack_list_variables): Handle --skip-unavailable.
2735 (list_arg_or_local): Add new parameter 'skip_unavailable'. Return
2736 early if SKIP_UNAVAILABLE is true and ARG->val is unavailable.
2738 (list_args_or_locals): New parameter 'skip_unavailable'.
2740 * valprint.c (scalar_type_p): Rename to ...
2741 (val_print_scalar_type_p): ... this. Make extern.
2742 (val_print, value_check_printable): Adjust.
2743 * valprint.h (val_print_scalar_type_p): Declare.
2744 * value.c (value_entirely_unavailable): New function.
2745 * value.h (value_entirely_unavailable): Declare.
2747 * NEWS: Mention the new option "--skip-unavailable" to MI
2748 commands '-stack-list-locals', '-stack-list-arguments' and
2749 '-stack-list-variables'.
2751 2013-08-27 Yao Qi <yao@codesourcery.com>
2753 * mi/mi-cmd-stack.c (parse_no_frames_option): Remove.
2754 (mi_cmd_stack_list_args): Use mi_getopt_silent to handle
2756 * mi/mi-getopt.c (mi_getopt): Remove.
2757 (mi_getopt_1): Renamed from mi_getopt. Add one parameter
2759 (mi_getopt): Call mi_getopt_1.
2760 (mi_getopt_silent): New.
2761 * mi/mi-getopt.h (mi_getopt_silent): Declare.
2763 2013-08-26 Doug Evans <dje@google.com>
2766 * dwarf2read.c (dw2_dump): Print some minimal information indicating
2767 .gdb_index is in use.
2768 * symfile.c (reread_symbols): Reset objfile->sf.
2770 * NEWS: Document "mt print objfiles" now takes optional regexp.
2771 * symmisc.c (maintenance_print_objfiles): Argument is now an optional
2772 regexp of objfiles to print.
2773 (_initialize_symmisc): Update doc string for "mt print objfiles".
2775 * dwarf2read.c (write_psymtabs_to_index): Move error checks ahead of
2776 missing debug info checks.
2778 2013-08-26 Raunaq Bathija <raunaq12@in.ibm.com>
2779 Ulrich Weigand <uweigand@de.ibm.com>
2781 * xcoffread.c (arrange_linetable): Add fix to correctly handle
2782 line tables generated by XLC compiled binaries.
2784 2013-08-23 Doug Evans <dje@google.com>
2786 * symmisc.c (dump_symtab): Delete prototype.
2787 (dump_msymbols, dump_objfile): Ditto.
2788 (maintenance_info_symtabs): Mark as dont_repeat.
2789 (_initialize_symmisc): Improve doc string for "mt info symtabs".
2791 * elfread.c (elf_symfile_read): Move "Done reading minimal symbols"
2792 debugging printf to better location.
2794 2013-08-23 Pedro Alves <palves@redhat.com>
2796 * target.c (target_read_live_memory): Change type of 'ret' local
2799 2013-08-23 Pedro Alves <palves@redhat.com>
2801 * remote.c (remote_write_bytes_aux, remote_write_bytes)
2802 (remote_read_bytes): Change return type to LONGEST, and adjust to
2803 return a target_xfer_error on error.
2804 (remote_xfer_memory): Delete.
2805 (remote_flash_write): Change type of 'ret' local to LONGEST.
2806 (remote_xfer_partial, remote_xfer_partial): Adjust.
2807 (init_remote_ops): Don't install a deprecated_xfer_memory hook.
2809 2013-08-23 Pierre Muller <muller@sourceware.org>
2811 ARI fix: Push # directives to start of line.
2812 * rs6000-nat.c (rs6000_ptrace32, rs6000_ptrace64): Rule applied.
2814 2013-08-12 Muhammad Waqas <mwaqas@codesourcery.com>
2817 * breakpoint.c (enable_command, disable_command): Iterate over
2818 all specified breakpoint locations.
2820 2013-08-22 Luis Machado <lgustavo@codesourcery.com>
2822 * common/linux-ptrace.c (linux_fork_to_function): Push #
2823 directives to the start of the line.
2824 (linux_check_ptrace_features): Fix warning message to use
2827 2013-08-22 Luis Machado <lgustavo@codesourcery.com>
2829 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-nat.h and
2830 nat/linux-waitpid.h.
2831 (linux-waitpid.o): New object file rule.
2832 * common/linux-ptrace.c: Include nat/linux-waitpid.h.
2833 (current_ptrace_options): Moved from linux-nat.c.
2834 (linux_ptrace_test_ret_to_nx): Use type casts for ptrace
2836 (linux_fork_to_function): New function.
2837 (linux_grandchild_function): Likewise.
2838 (linux_child_function): Likewise.
2839 (linux_check_ptrace_features): New function, heavily
2840 based on linux-nat.c:linux_test_for_tracefork.
2841 (linux_enable_event_reporting): New function.
2842 (ptrace_supports_feature): Likewise.
2843 (linux_supports_tracefork): Likewise.
2844 (linux_supports_traceclone): Likewise.
2845 (linux_supports_tracevforkdone): Likewise.
2846 (linux_supports_tracesysgood): Likewise.
2847 * common/linux-ptrace.h (HAS_NOMMU): Moved from
2848 gdbserver/linux-low.c.
2849 (linux_enable_event_reporting): New declaration.
2850 (linux_supports_tracefork): Likewise.
2851 (linux_supports_traceclone): Likewise.
2852 (linux_supports_tracevforkdone): Likewise.
2853 (linux_supports_tracesysgood): Likewise.
2854 * config.in (PTRACE_TYPE_ARG4): Regenerate.
2855 * config/aarch64/linux.mh (NATDEPFILES): Add linux-waitpid.o.
2856 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
2857 * config/arm/linux.mh (NATDEPFILES): Likewise.
2858 * config/i386/linux.mh (NATDEPFILES): Likewise.
2859 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2860 * config/ia64/linux.mh (NATDEPFILES): Likewise.
2861 * config/m32r/linux.mh (NATDEPFILES): Likewise.
2862 * config/m68k/linux.mh (NATDEPFILES): Likewise.
2863 * config/mips/linux.mh (NATDEPFILES): Likewise.
2864 * config/pa/linux.mh (NATDEPFILES): Likewise..
2865 * config/powerpc/linux.mh (NATDEPFILES): Likewise..
2866 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
2867 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
2868 * config/sparc/linux.mh (NATDEPFILES): Likewise.
2869 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
2870 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
2871 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
2872 * configure.ac (AC_CACHE_CHECK): Add void * to the list of
2873 ptrace's 4th argument's types.
2874 Check the type of PTRACE_TYPE_ARG4.
2875 * configure: Regenerate.
2876 * linux-nat.c: Include nat/linux-nat.h and nat/linux-waitpid.h.
2877 (SYSCALL_SIGTRAP): Moved to nat/linux-nat.h.
2878 (linux_supports_tracefork_flag): Remove.
2879 (linux_supports_tracesysgood_flag): Likewise.
2880 (linux_supports_tracevforkdone_flag): Likewise.
2881 (current_ptrace_options): Moved to
2882 common/linux-ptrace.c.
2883 (linux_tracefork_child): Remove.
2884 (my_waitpid): Remove.
2885 (linux_test_for_tracefork): Renamed to
2886 linux_check_ptrace_features and moved to common/linux-ptrace.c.
2887 (linux_test_for_tracesysgood): Remove.
2888 (linux_supports_tracesysgood): Remove.
2889 (linux_supports_tracefork): Remove.
2890 (linux_supports_tracevforkdone): Remove.
2891 (linux_enable_tracesysgood): Remove.
2892 (linux_enable_event_reporting): Remove.
2893 (linux_init_ptrace): New function.
2894 (linux_child_post_attach): Call linux_init_ptrace.
2895 (linux_child_post_startup_inferior): Call linux_init_ptrace.
2896 (linux_child_follow_fork): Call linux_supports_tracefork
2897 and linux_supports_tracevforkdone.
2898 (linux_child_insert_fork_catchpoint): Call
2899 linux_supports_tracefork.
2900 (linux_child_insert_vfork_catchpoint): Likewise.
2901 (linux_child_set_syscall_catchpoint): Call
2902 linux_supports_tracesysgood.
2903 (lin_lwp_attach_lwp): Call linux_supports_tracefork.
2904 * nat/linux-nat.h: New file.
2905 * nat/linux-waitpid.c: New file.
2906 * nat/linux-waitpid.h: New file.
2908 2013-08-22 Samuel Bronson <naesten@gmail.com>
2910 ARM Linux support for `catch syscall'.
2911 * syscalls/arm-linux.py: New file.
2912 * syscalls/arm-linux.xml: Likewise.
2913 * arm-linux-tdep.c (arm_linux_get_syscall_number): New function.
2914 (arm_linux_init_abi): Register the new function and syscall xml file.
2915 * data-directory/Makefile.in: Install the new syscall xml file.
2916 * NEWS: Brag about this.
2918 2013-08-22 Pedro Alves <palves@redhat.com>
2921 * corefile.c (target_xfer_memory_error): New function.
2922 (memory_error): Defer EIO to target_memory_error.
2923 (read_memory): Use target_xfer_partial, and handle finer-grained
2925 * target.c (target_xfer_error_to_string): New function.
2926 (memory_xfer_partial_1): If memory is known to be
2927 unavailable, return TARGET_XFER_E_UNAVAILABLE instead of -1.
2928 (target_xfer_partial): Make extern.
2929 * target.h (enum target_xfer_error): New enum.
2930 (target_xfer_error_to_string): Declare function.
2931 (target_xfer_partial): Declare function.
2932 (struct target_ops) <xfer_partial>: Adjust describing comment.
2934 2013-08-22 Alan Modra <amodra@gmail.com>
2936 * configure.host: Support powerpc64le-linux and powerpcle-linux hosts.
2937 * configure.tgt: Likewise as targets.
2939 2013-08-20 Doug Evans <dje@google.com>
2941 * buildsym.c (subfile_stack): Move here from buildsym.h.
2942 (pending_macros): Ditto.
2943 (get_macro_table): New function.
2944 (buildsym_init): Initialize subfile_stack.
2945 * coffread.c (type_vector,type_vector_length): Moved here from
2947 (INITIAL_TYPE_VECTOR_LENGTH): Ditto.
2948 (coff_symtab_read): Use it.
2949 * dbxread.c (read_ofile_symtab): Delete init of subfile_stack.
2950 * dwarf2read.c (macro_start_file): Replace uses of pending_macros
2951 with call to get_macro_table.
2952 * stabsread.c (type_vector,type_vector_length): Moved here from
2954 (INITIAL_TYPE_VECTOR_LENGTH): Ditto.
2955 * buildsym.h (get_macro_table): Declare.
2957 2013-08-20 Tom Tromey <tromey@redhat.com>
2959 * dbxread.c (record_minimal_symbol): Make 'name' argument const.
2961 (read_dbx_dynamic_symtab): Make 'name' const. Remove casts.
2963 2013-08-20 Doug Evans <dje@google.com>
2965 * blockframe.c: Remove #include "psymtab.h".
2966 * cp-support.c: Ditto.
2970 2013-08-20 Tom Tromey <tromey@redhat.com>
2973 * exceptions.h (return_mask): Now an enum.
2974 (RETURN_MASK_QUIT, RETURN_MASK_ERROR, RETURN_MASK_ALL): Now
2977 2013-08-20 Tom Tromey <tromey@redhat.com>
2979 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Use
2981 * elfread.c (elf_rel_plt_read, elf_gnu_ifunc_record_cache)
2982 (elf_gnu_ifunc_resolve_by_got): Use get_objfile_arch.
2983 * jit.c (jit_object_close_impl): Update.
2984 * jv-lang.c (get_dynamics_objfile): Update.
2985 * linespec.c (add_minsym): Use get_dynamics_objfile.
2986 * objfiles.c (get_objfile_bfd_data): Initialize 'gdbarch' field.
2987 (allocate_objfile): Don't initialize 'gdbarch' field.
2988 (get_objfile_arch): Update.
2989 * objfiles.h (struct objfile_per_bfd_storage) <gdbarch>: New field,
2991 (struct objfile) <gdbarch>: ... here. Remove.
2992 * stap-probe.c (stap_can_evaluate_probe_arguments): Use
2994 * symfile.c (init_entry_point_info): Use get_objfile_arch.
2996 2013-08-20 Alan Modra <amodra@gmail.com>
2998 * doublest.c (convert_floatformat_to_doublest): Use fmt->split_half
2999 for IBM long double nan and inf.
3000 (floatformat_is_negative, floatformat_classify,
3001 floatformat_mantissa): Similarly.
3002 (floatformat_ieee_single, floatformat_ieee_double,
3003 floatformat_ieee_quad, floatformat_arm_ext,
3004 floatformat_ia64_spill): Delete unused vars.
3005 (_initialize_doublest): Delete unused function.
3006 * gdbtypes.c (floatformats_ibm_long_double): Use new big- and
3007 little-endian variants of floatformat_ibm_long_double.
3009 2013-08-19 Luis Machado <lgustavo@codesourcery.com>
3011 * Makefile.in (SFILES): Remove common/target-common.c and
3012 add target/waitstatus.c.
3013 (HFILES_NO_SRCDIR): Remove common/target-common.h and add
3014 target/resume.h, target/wait.h and target/waitstatus.h.
3015 (COMMON_OBS): Remove target-common.o and add
3017 (target-common.o): Remove.
3018 (waitstatus.o): New target object file.
3019 * common/target-common.c: Move contents to
3020 target/waitstatus.c and remove.
3021 * common/target-common.h: Move contents to other files and
3023 (enum resume_kind: Move to target/resume.h.
3024 (TARGET_WNOHANG): Move to target/wait.h.
3025 (enum target_waitkind): Move to target/waitstatus.h.
3026 (struct target_waitstatus): Likewise.
3027 * target.h: Do not include target-common.h and
3028 include target/resume.h, target/wait.h and
3029 target/waitstatus.h.
3030 * target/resume.h: New file.
3031 * target/wait.h: New file.
3032 * target/waitstatus.h: New file.
3033 * target/waitstatus.c: New file.
3035 2013-08-19 Pedro Alves <palves@redhat.com>
3037 * linux-nat.c (linux_test_for_tracefork)
3038 (linux_test_for_tracesysgood, linux_child_follow_fork)
3039 (lin_lwp_attach_lwp, linux_nat_resume): Don't block child signals.
3040 (linux_nat_wait_1): Extend comment.
3041 (linux_async_pipe): Add comment.
3043 2013-08-15 Kevin Buettner <kevinb@redhat.com>
3045 * rl78-tdep.c (RL78_RAW_PC_REGNUM): New enum.
3046 (RL78_PC_REGNUM): Move to list of pseudo-register enums.
3047 (rl78_register_type, rl78_register_name, rl78_register_reggroup_p):
3048 Update to account for fact that PC is now a pseudo-register.
3049 (rl78_pseudo_register_write, rl78_pseudo_register_read): Add
3050 cases for RL78_PC_REGNUM.
3052 2013-08-15 Muhammad Bilal <mbilal@codesourcery.com>
3055 * top.c (quit_force): Skip writing history file
3056 if input is not from terminal.
3058 2013-08-14 Tom Tromey <tromey@redhat.com>
3060 * remote.c (struct remote_state) <echo_nextthread, nextthread,
3061 resultthreadlist>: New fields.
3062 (OPAQUETHREADBYTES, threadref, MAXTHREADLISTRESULTS): Move earlier.
3063 (remote_get_threadlist, remote_threadlist_iterator): Use
3064 new fields. Remove static variables.
3066 2013-08-14 Tom Tromey <tromey@redhat.com>
3068 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p,
3069 remote_watch_data_address>: New fields.
3070 (remote_stopped_by_watchpoint_p, remote_watch_data_address): Remove.
3071 (process_stop_reply, remote_wait_as)
3072 (remote_check_watch_resources, remote_stopped_data_address): Update.
3074 2013-08-14 Tom Tromey <tromey@redhat.com>
3076 * remote.c (struct remote_state) <async_client_callback,
3077 async_client_context>: New fields.
3078 (async_client_callback, async_client_context): Remove.
3079 (remote_async_serial_handler, remote_async): Update.
3081 2013-08-14 Tom Tromey <tromey@redhat.com>
3083 * remote.c (sizeof_pkt): Remove.
3084 (remote_trace_find): Use rs->buf_size, not sizeof_pkt.
3086 2013-08-14 Tom Tromey <tromey@redhat.com>
3088 * remote.c (struct remote_state) <use_threadinfo_query,
3089 use_threadextra_query>: New fields.
3090 (remote_threads_info, remote_threads_extra_info)
3091 (remote_open_1): Update.
3093 2013-08-14 Tom Tromey <tromey@redhat.com>
3095 * remote.c (struct remote_state) <finished_object,
3096 finished_annex, finished_offset>: New fields.
3097 (remote_read_qxfer): Use remote_state fields; remove static
3100 2013-08-14 Tom Tromey <tromey@redhat.com>
3102 * remote.c (struct remote_state) <last_sent_step>:
3104 (last_sent_step): Remove.
3105 (remote_resume, remote_wait_as): Update.
3107 2013-08-14 Tom Tromey <tromey@redhat.com>
3109 * remote.c (struct remote_state) <last_sent_signal>:
3111 (last_sent_signal): Remove.
3112 (new_remote_state, remote_resume, remote_wait_as): Update.
3114 2013-08-14 Tom Tromey <tromey@redhat.com>
3116 * remote.c (struct remote_state) <last_program_signals_packet>:
3118 (last_program_signals_packet): Remove.
3119 (remote_program_signals, remote_open_1): Update.
3121 2013-08-14 Tom Tromey <tromey@redhat.com>
3123 * remote.c (struct remote_state) <last_pass_packet>:
3125 (last_pass_packet): Remove.
3126 (remote_pass_signals, remote_open_1): Update.
3128 2013-08-14 Tom Tromey <tromey@redhat.com>
3130 * remote.c (struct remote_state) <remote_traceframe_number>:
3132 (remote_traceframe_number): Remove.
3133 (new_remote_state, remote_open_1, set_remote_traceframe)
3134 (remote_trace_find): Update.
3136 2013-08-14 Tom Tromey <tromey@redhat.com>
3138 * remote.c (struct remote_state) <general_thread, continue_thread>:
3140 (general_thread, continue_thread): Remove.
3141 (record_currthread, set_thread, set_general_process)
3142 (remote_open_1, extended_remote_attach_1, remote_wait_as)
3143 (extended_remote_mourn_1): Update.
3145 2013-08-14 Tom Tromey <tromey@redhat.com>
3147 * remote.c (struct remote_state) <remote_desc>: New field.
3148 (remote_desc): Remove.
3149 (remote_threads_info, remote_threads_extra_info, remote_close)
3150 (send_interrupt_sequence, remote_start_remote, remote_open_1)
3151 (readchar, remote_xfer_partial, remote_rcmd, packet_command)
3152 (remote_hostio_send_command, remote_file_put, remote_file_get)
3153 (remote_file_delete, remote_can_async_p, remote_is_async_p)
3154 (remote_async, remote_new_objfile, set_range_stepping): Update.
3156 2013-08-14 Tom Tromey <tromey@redhat.com>
3158 * remote.c (remote_state): Now a pointer.
3159 (get_remote_state_raw): Update.
3160 (new_remote_state): New function.
3161 (_initialize_remote): Use new_remote_state.
3163 2013-08-14 Tom Tromey <tromey@redhat.com>
3165 * remote.c (remote_protocol_features): Now const.
3167 2013-08-14 Tom Tromey <tromey@redhat.com>
3169 * remote.c (crc32_table, crc32): Remove.
3170 (remote_verify_memory): Use xcrc32.
3172 2013-08-13 Sergio Durigan Junior <sergiodj@redhat.com>
3174 * value.h (create_internalvar_type_lazy): Adjust prototype
3177 2013-08-13 Andrew Burgess <aburgess@broadcom.com>
3179 * common/format.c (parse_format_string): Don't allow '#' flag for
3180 pointer arguments in format string.
3182 2013-08-13 Pierre Muller <muller@sourceware.org>
3184 * utils.c (init_page_info): Only call tgetnum function
3185 if rl_get_screen_size did not return useful values.
3187 2013-08-12 Ali Anwar <ali_anwar@codesourcery.com>
3189 PR breakpoints/15117
3190 * linespec.c (linespec_parse_basic): Check for convenience
3191 variable or history value while parsing.
3193 2013-08-12 Sergio Durigan Junior <sergiodj@redhat.com>
3195 Revert implementation of gdbarch_gdb_signal_{to,from}_target for
3197 * avr-tdep.c: Remove include of "linux-tdep.h". Remove enum with
3198 different signals between the generic Linux kernel implementation
3200 (avr_linux_gdb_signal_from_target): Delete.
3201 (avr_linux_gdb_signal_to_target): Delete.
3202 (avr_gdbarch_init): Don't set gdbarch_gdb_signal_{to,from}_target.
3204 2013-08-09 Doug Evans <dje@google.com>
3206 * dwarf2read.c (create_addrmap_from_index): Ignore bad address table
3209 2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com>
3211 * linux-tdep.c: Define enum with generic signal numbers.
3212 (linux_gdb_signal_from_target): New function.
3213 (linux_gdb_signal_to_target): Likewise.
3214 (linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
3215 methods to the functions above.
3216 * linux-tdep.h (linux_gdb_signal_from_target): New prototype.
3217 (linux_gdb_signal_to_target): Likewise.
3218 * alpha-linux-tdep.c: Define new enum with signals different
3219 from generic Linux kernel.
3220 (alpha_linux_gdb_signal_from_target): New function.
3221 (alpha_linux_gdb_signal_to_target): Likewise.
3222 (alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
3223 with the functions mentioned above.
3224 * avr-tdep.c: Define enum with differences between Linux kernel
3226 (avr_linux_gdb_signal_from_target): New function.
3227 (avr_linux_gdb_signal_to_target): Likewise.
3228 (avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to
3229 the functions mentioned above.
3230 * sparc-linux-tdep.c: Define enum with differences between SPARC
3231 and generic Linux kernel signal numbers.
3232 (sparc32_linux_gdb_signal_from_target): New function.
3233 (sparc32_linux_gdb_signal_to_target): Likewise.
3234 (sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
3235 to the functions defined above.
3236 * xtensa-linux-tdep.c: Define enum with differences between
3237 Xtensa and Linux kernel generic signals.
3238 (xtensa_linux_gdb_signal_from_target): New function.
3239 (xtensa_linux_gdb_signal_to_target): Likewise.
3240 (xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target
3241 to the functions defined above.
3242 * mips-linux-tdep.c: Define enum with differences between
3243 signals in MIPS and Linux kernel generic ones.
3244 (mips_gdb_signal_to_target): New function.
3245 (mips_gdb_signal_from_target): Redefine to use new enum, handle
3246 only different signals from the Linux kernel generic.
3247 (mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
3248 the functions defined above.
3249 * mips-linux-tdep.h (enum mips_signals): Remove.
3251 2013-08-09 Pedro Alves <palves@redhat.com>
3253 * avr-tdep.c (XMALLOC): Delete macro.
3254 * cli/cli-dump.c (XMALLOC): Delete macro.
3256 2013-08-09 Pedro Alves <palves@redhat.com>
3258 * cli/cli-dump.c: Don't include cli/cli-dump.h.
3259 (scan_expression_with_cleanup, scan_filename_with_cleanup)
3260 (fopen_with_cleanup, add_dump_command): Make static.
3261 * cli/cli-dump.h: Delete file.
3262 * Makefile.in (HFILES_NO_SRCDIR): Remove reference to
3265 2013-08-09 Pedro Alves <palves@redhat.com>
3267 * tracepoint.c (tfile_start): Show tilde-expanded filename in
3270 2013-08-09 Pedro Alves <palves@redhat.com>
3272 * breakpoint.c (save_breakpoints): Show tilde-expanded filename in
3275 2013-08-09 Pedro Alves <palves@redhat.com>
3277 * gcore.c (create_gcore_bfd): Don't use tilde_expand here.
3278 (gcore_command): Use tilde_expand here, and when showing the
3279 filename to the user, show the expanded version.
3281 2013-08-09 Yao Qi <yao@codesourcery.com>
3283 * stack.c (read_frame_arg): Set 'entryval_error' to NULL if
3286 2013-08-08 Azat Khuzhin <a3at.mail@gmail.com> (tiny change)
3288 * gcore.c (create_gcore_bfd): Use tilde_expand.
3290 2013-08-08 Yao Qi <yao@codesourcery.com>
3292 * frame.h (read_frame_local): Declare.
3293 * mi/mi-cmd-stack.c (list_args_or_locals): Call
3295 * stack.c (read_frame_local): New.
3297 2013-08-08 Yao Qi <yao@codesourcery.com>
3299 * mi/mi-cmd-stack.c: Update comments to function
3300 list_args_or_locals.
3302 2013-08-07 Tom Tromey <tromey@redhat.com>
3305 * dwarf2read.c (struct process_psymtab_comp_unit_data): New.
3306 (process_psymtab_comp_unit_reader): Use it.
3307 (process_psymtab_comp_unit): Update. Add "pretend_language"
3309 (dwarf2_build_psymtabs_hard): Update.
3310 (scan_partial_symbols): Pass CU's language to
3311 process_psymtab_comp_unit.
3313 2013-08-07 Tom Tromey <tromey@redhat.com>
3315 * dwarf2read.c (dw2_get_primary_filename_reader): Remove.
3316 (dwarf2_gdb_index_functions): Update.
3317 * psymtab.c (find_symbol_file_from_partial): Remove.
3318 (psym_functions): Update.
3319 * symfile.h (struct quick_symbol_functions) <find_symbol_file>:
3322 2013-08-07 Tom Tromey <tromey@redhat.com>
3324 * symfile.c (set_initial_language): Look up "main" symbol
3325 and use its language.
3326 * symtab.c (find_main_filename): Remove.
3327 * symtab.h (find_main_filename): Remove.
3329 2013-08-07 Tom Tromey <tromey@redhat.com>
3331 * dwarf2read.c (recursively_compute_inclusions): Add
3332 "immediate_parent" argument. Set symtab's "user" field
3334 (compute_symtab_includes): Update.
3336 2013-08-07 Tom Tromey <tromey@redhat.com>
3338 * linespec.c (convert_linespec_to_sals): Use maybe_add_address
3339 when adding label symbols.
3341 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
3342 Ulrich Weigand <uweigand@de.ibm.com>
3344 * configure.tgt (powerpc64-*-aix*): Match powerpc64 running aix.
3345 * configure.host (powerpc64-*-aix*): Likewise.
3347 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
3348 Ulrich Weigand <uweigand@de.ibm.com>
3350 * gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64
3352 * rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb.
3353 (rs6000_ptrace32): Call ptrace64 instead of ptrace if present.
3354 (rs6000_ptrace64): Call ptace64 instead of ptracex if present.
3355 * configure.ac: Check for ptrace64.
3356 * configure, config.in: Regenerate.
3358 2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
3359 Ulrich Weigand <uweigand@de.ibm.com>
3361 * aixthread.c: Call ptrace64 instead of ptracex if defined.
3362 Call ptrace64 instead of ptrace if defined.
3363 Add macro addr_ptr to take care of ptrace address argument.
3364 (pdc_read_regs): Likewise.
3365 (pdc_write_regs): Likewise.
3366 (aix_thread_resume): Likewise.
3367 (fetch_regs_kernel_thread): Likewise.
3368 (store_regs_kernel_thread): Likewise.
3370 2013-08-07 Anton Blanchard <anton@samba.org>
3372 * MAINTAINERS: Add myself to Write After Approval.
3374 2013-08-05 Tom Tromey <tromey@redhat.com>
3376 * aix-thread.c (_initialize_aix_thread): Use
3377 complete_target_initialization.
3378 * bsd-uthread.c (_initialize_bsd_uthread): Use
3379 complete_target_initialization.
3380 * dec-thread.c (_initialize_dec_thread): Use
3381 complete_target_initialization.
3382 * ravenscar-thread.c (_initialize_ravenscar): Use
3383 complete_target_initialization.
3384 * sol-thread.c (_initialize_sol_thread): Use
3385 complete_target_initialization.
3386 * spu-multiarch.c (_initialize_spu_multiarch): Use
3387 complete_target_initialization.
3389 2013-08-05 Tom Tromey <tromey@redhat.com>
3391 * ada-exp.y (write_var_or_type): Use bound_minimal_symbol.
3392 * ada-lang.c (ada_lookup_simple_minsym): Return
3393 bound_minimal_symbol.
3394 * ada-lang.h (ada_lookup_simple_minsym): Update.
3395 * c-exp.y (variable): Use lookup_bound_minimal_symbol.
3396 * f-exp.y (variable): Use lookup_bound_minimal_symbol.
3397 * go-exp.y (variable): Use lookup_bound_minimal_symbol.
3398 * jv-exp.y (push_expression_name): Use lookup_bound_minimal_symbol.
3399 * m2-exp.y (variable): Use lookup_bound_minimal_symbol.
3400 * minsyms.c (msymbol_objfile): Remove.
3401 (lookup_minimal_symbol_internal): New function, from
3402 lookup_minimal_symbol.
3403 (lookup_minimal_symbol): Rewrite using
3404 lookup_minimal_symbol_internal.
3405 (lookup_bound_minimal_symbol): New function.
3406 * minsyms.h (msymbol_objfile): Remove.
3407 (lookup_bound_minimal_symbol): Declare.
3408 * p-exp.y (variable): Use lookup_bound_minimal_symbol.
3409 * parse.c (write_exp_msymbol): Change parameter to a
3410 bound_minimal_symbol.
3411 (write_dollar_variable): Use lookup_bound_minimal_symbol.
3412 * parser-defs.h (write_exp_msymbol): Update.
3413 * printcmd.c (address_info): Use lookup_bound_minimal_symbol.
3414 * symfile.c (simple_read_overlay_table): Use
3415 lookup_bound_minimal_symbol.
3416 * symtab.c (skip_prologue_sal): Don't use msymbol_objfile.
3417 (search_symbols): Likewise.
3418 (print_msymbol_info): Take a bound_minimal_symbol argument.
3419 (symtab_symbol_info, rbreak_command): Update.
3420 * symtab.h (struct symbol_search) <msymbol>: Change type
3421 to bound_minimal_symbol.
3422 * valops.c (find_function_in_inferior): Use
3423 lookup_bound_minimal_symbol.
3424 * value.c (value_fn_field): Use lookup_bound_minimal_symbol.
3426 2013-08-05 Jan Kratochvil <jan.kratochvil@redhat.com>
3429 * remote.c (cleanup_sigint_signal_handler): Rename the declaration
3431 (async_cleanup_sigint_signal_handler): ... this.
3432 (initialize_sigint_signal_handler): Remove declaration.
3433 (handle_remote_sigint): Rename the declaration to ...
3434 (async_handle_remote_sigint): ... this.
3435 (handle_remote_sigint_twice): Rename the declaration to ...
3436 (async_handle_remote_sigint_twice): ... this.
3437 (async_remote_interrupt, async_remote_interrupt_twice)
3438 (remote_interrupt): Remove the declarations.
3439 (remote_interrupt_twice): Rename the declaration ...
3440 (sync_remote_interrupt_twice): ... this.
3441 (sigint_remote_twice_token): Rename the variable to ...
3442 (async_sigint_remote_twice_token): ... this.
3443 (sigint_remote_token): Rename the variable to ...
3444 (async_sigint_remote_token): ... this.
3445 (initialize_sigint_signal_handler): Rename the function to ...
3446 (async_initialize_sigint_signal_handler): ... this. Update the name
3448 (handle_remote_sigint): Rename the function to ...
3449 (async_handle_remote_sigint): ... this. Update the names inside.
3450 (handle_remote_sigint_twice): Rename the function to ...
3451 (async_handle_remote_sigint_twice): ... this. Update the names inside.
3452 (cleanup_sigint_signal_handler): Rename the function to ...
3453 (async_cleanup_sigint_signal_handler): ... this.
3454 (remote_interrupt): Rename the function to ...
3455 (sync_remote_interrupt): this. Update the names inside.
3456 (remote_interrupt_twice): Rename the function to ...
3457 (sync_remote_interrupt_twice): this. Update the names inside.
3458 (remote_terminal_inferior, remote_terminal_ours, remote_wait_as)
3459 (_initialize_remote): Update the names inside.
3461 2013-08-02 Tom Tromey <tromey@redhat.com>
3464 * breakpoint.c (update_watchpoint, watchpoint_check)
3465 (watch_command_1): Update.
3466 * eval.c (fetch_subexp_value): Add "preserve_errors"
3468 * ppc-linux-nat.c (check_condition): Update.
3469 * value.h (fetch_subexp_value): Update.
3471 2013-08-02 Andrew Burgess <aburgess@broadcom.com>
3473 * mi/mi-interp.c (mi_interpreter_resume): Remove call to
3476 2013-08-01 Doug Evans <dje@google.com>
3479 * dwarf2read.c (struct dwarf2_per_cu_data): New member tu_read.
3480 (fill_in_sig_entry_from_dwo_entry): Reorganize asserts.
3481 Add assert of sig_entry->dwo_unit == NULL.
3482 (lookup_dwo_signatured_type): Don't assign TU to a DWO if the TU
3483 had already been read.
3484 (read_signatured_type): Set per_cu.tu_read.
3487 * valops.c (value_struct_elt): Add missing call to check_typedef.
3488 (value_find_oload_method_list): Ditto.
3490 * symtab.c (do_free_search_symbols_cleanup): Change arg to,
3491 effectively, struct symbol_search **.
3492 (make_cleanup_free_search_symbols): Change arg to struct
3493 symbol_search **. All callers updated.
3494 (compare_search_syms): Compare symtab file name and block as well.
3495 (search_symbols_equal): New function.
3496 (sort_search_symbols_remove_dups): Renamed from sort_search_symbols.
3497 New args new_head, new_tail. Result is now void. Remove dups after
3498 sorting the symbols.
3499 (search_symbols): Sort all found symbols once, after all have been
3500 found, and remove duplicates. Simplify cleanup tracking of result.
3501 * symtab.h (make_cleanup_free_search_symbols): Update prototype.
3503 Further workarounds for binutils/15021.
3504 * dwarf2read.c (recursively_compute_inclusions): Change type of result
3505 parameter to VEC (symtab_ptr) **. New parameter all_type_symtabs.
3506 Watch for duplicate symtabs coming from type units.
3507 (compute_symtab_includes): Update call to
3508 recursively_compute_inclusions. Build vector of included symtabs
3510 * symtab.h (symtab_ptr): New typedef.
3511 (DEF_VEC_P (symtab_ptr)): New VEC type.
3512 * linespec.c (symtab_p): Delete. All uses updated to use symtab_ptr
3515 2013-08-01 Andrew Burgess <aburgess@broadcom.com>
3517 * cli/cli-script.c (script_from_file): Remove use of
3519 * main.c (captured_main): Remove use of error_pre_print and
3521 * utils.c (error_pre_print, quit_pre_print): Remove.
3522 * utils.h (error_pre_print, quit_pre_print): Likewise.
3524 2013-08-01 Yao Qi <yao@codesourcery.com>
3526 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Parse argv
3528 (mi_cmd_stack_list_variables): Likewise.
3530 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
3532 * exceptions.c (deprecated_throw_reason): Remove.
3533 * exceptions.h (deprecated_throw_reason): Remove.
3535 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
3537 * remote-mips.c (mips_error): Replace use of
3538 deprecated_throw_reason with throw_verror. Use the error message
3539 passed to mips_error as the error message for throw_verror.
3541 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
3543 * monitor.c (monitor_interrupt_query): Replace use of
3544 deprecated_throw_reason with quit.
3545 * nto-procfs.c (interrupt_query): Likewise.
3546 * remote-fileio.c (remote_fileio_sig_exit): Likewise.
3547 * remote-mips.c (mips_kill): Likewise.
3548 * remote.c (interrupt_query): Likewise.
3550 2013-07-31 Andrew Burgess <aburgess@broadcom.com>
3552 * utils.c (internal_verror): Replace use of deprecated_throw_reason
3555 2013-07-31 Pedro Alves <pedro@codesourcery.com>
3556 Yao Qi <yao@codesourcery.com>
3558 * tracepoint.c (trace_dump_command): Select the current frame.
3560 2013-07-30 Doug Evans <dje@google.com>
3562 * dwarf2read.c (process_queue): Add type signature to debug output.
3564 2013-07-30 Andrew Burgess <aburgess@broadcom.com>
3566 * value.c (value_fetch_lazy): Mark optimized out values as such
3567 rather than raising an error.
3569 2013-07-30 Andrew Burgess <aburgess@broadcom.com>
3571 * value.c (value_fetch_lazy): Ensure parent value is not lazy
3572 before checking which bits of the parent, not the child, value are
3575 2013-07-30 Muhammad Bilal <mbilal@codesorcery.com>
3578 * top.c: Include "filenames.h".
3579 (set_history_filename): New function.
3580 (init_main): Install it as set hook of the "set history filename"
3583 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
3585 * dwarf2read.c (dwarf2_get_ref_die_offset): Constify struct
3586 attribute parameter.
3587 (dwarf2_const_value_data): Constify struct attribute parameter.
3588 (dwarf2_const_value): Constify struct attribute parameter.
3589 (dwarf2_const_value_attr): Constify struct attribute parameter.
3590 (lookup_die_type): Constify struct attribute parameter.
3591 (dwarf2_get_attr_constant_value): Constify struct attribute parameter.
3592 (follow_die_ref_or_sig): Constify struct attribute parameter.
3593 (follow_die_ref): Constify struct attribute parameter.
3594 (follow_die_sig): Constify struct attribute parameter.
3595 (get_DW_AT_signature_type): Constify struct attribute parameter.
3596 (get_type_unit_group): Constify struct attribute parameter.
3597 (fill_in_loclist_baton): Constify struct attribute parameter.
3598 (dwarf2_symbol_mark_computed): Constify struct attribute parameter.
3599 (type_unit_group): Constify struct attribute parameter.
3601 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
3603 * dwarf2read.c (attr_form_is_block): Make argument const.
3604 (attr_form_is_section_offset): Make argument const.
3605 (attr_form_is_constant): Make argument const.
3606 (attr_form_is_ref): Make argument const.
3608 2013-07-30 Sanimir Agovic <sanimir.agovic@intel.com>
3610 * dwarf2read.c (attr_is_ref): Rename to attr_form_is_ref.
3612 (attr_form_is_ref): Moved below attr_form_is_constant.
3614 2013-07-29 Doug Evans <dje@google.com>
3616 * main.c (captured_command_loop): Tweak comment.
3618 * target.c (target_async_permitted_1): Fix comment.
3620 * symtab.c (iterate_over_some_symtabs): Add comment.
3622 * symtab.c (iterate_over_some_symtabs): Fix indentation.
3624 2013-07-27 Yao Qi <yao@codesourcery.com>
3626 * NEWS: Mention that GDBserver now supports hardware
3627 watchpoints on the MIPS GNU/Linux target.
3629 2013-07-27 Yao Qi <yao@codesourcery.com>
3631 * Makefile.in (HFILES_NO_SRCDIR): Add
3632 common/mips-linux-watch.h.
3633 (mips-linux-watch.o): New rule.
3634 * common/mips-linux-watch.c: New.
3635 * common/mips-linux-watch.h: New.
3636 * config/mips/linux.mh (NATDEPFILES): Add mips-linux-watch.o
3637 * mips-linux-nat.c: Include mips-linux-watch.h.
3638 (W_BIT, R_BIT, I_BIT, W_MASK, R_MASK, I_MASK, IRW_MASK): Move
3639 to common/mips-linux-watch.h.
3640 (MAX_DEBUG_REGISTER): Likewise.
3641 (enum pt_watch_style): Likewise.
3642 (struct mips32_watch_regs): Likewise.
3643 (struct mips64_watch_regs): Likewise.
3644 (struct pt_watch_regs): Likewise.
3645 (struct mips_watchpoint): Likewise.
3646 (mips_linux_watch_get_irw_mask): Move to
3647 common/mips-linux-watch.c.
3648 (get_reg_mask, mips_linux_watch_get_num_valid): Likewise.
3649 (mips_linux_watch_get_watchlo): Likewise.
3650 (mips_linux_watch_set_watchlo): Likewise.
3651 (mips_linux_watch_get_watchhi): Likewise.
3652 (mips_linux_watch_set_watchhi): Likewise.
3653 (mips_linux_read_watch_registers): Likewise.
3654 (mips_linux_watch_type_to_irw): Likewise.
3655 (mips_linux_stopped_data_address, fill_mask): Likewise.
3656 (mips_linux_watch_try_one_watch): Likewise.
3657 (mips_linux_watch_populate_regs): Likewise.
3659 2013-07-27 Yao Qi <yao@codesourcery.com>
3661 * mips-linux-nat.c (get_irw_mask): Rename to ...
3662 (mips_linux_watch_get_irw_mask): ... this. Rename parameter
3663 'set' to 'n'. Update function comment. All callers changed.
3664 (get_reg_mask): Rename parameter 'set' to 'n'. Update
3665 function comment. All callers changed.
3666 (get_num_valid): Rename to ...
3667 (mips_linux_watch_get_num_valid): ... this. Rename parameter
3668 'set' to 'n'. Update function comment. All callers changed.
3669 (get_watchlo): Rename to ...
3670 (mips_linux_watch_get_watchlo): ... this. Rename parameter
3671 'set' to 'n'. Update function comment. All callers changed.
3672 (set_watchlo): Rename to ...
3673 (mips_linux_watch_set_watchlo): ... this. Rename parameter
3674 'set' to 'n'. Update function comment. All callers changed.
3675 (get_watchhi): Rename to ...
3676 (mips_linux_watch_get_watchhi): ... this. Update function
3677 comment. All callers changed.
3678 (set_watchhi): Rename to ...
3679 (mips_linux_watch_set_watchhi): ... this. Update function
3680 comment. All callers changed.
3681 (mips_linux_read_watch_registers): Update function comment.
3682 Add new parameters 'lwpid', 'watch_readback', and
3683 'watch_readback_valid'. Update.
3684 (type_to_irw): Rename to ...
3685 (mips_linux_watch_type_to_irw): ... this. Update function
3686 comment. All callers changed.
3687 (fill_mask): Update function comment.
3688 (try_one_watch): Rename to ...
3689 (mips_linux_watch_try_one_watch): ... this. Change the type
3690 of parameter 'irw' from 'unsigned' to 'uint32_t'.
3691 (populate_regs_from_watches): Rename to ...
3692 (mips_linux_watch_populate_regs): ... this. Add parameter
3693 'current_watches'. All callers changed.
3695 2013-07-27 Yao Qi <yao@codesourcery.com>
3697 * mips-linux-nat.c (MAX_DEBUG_REGISTER): Move it earlier in
3699 (PTRACE_SET_WATCH_REGS, enum pt_watch_style): Remove.
3700 (struct mips32_watch_regs, struct mips64_watch_regs): Remove.
3701 (struct pt_watch_regs): Likewise.
3702 [!PTRACE_GET_WATCH_REGS] (PTRACE_SET_WATCH_REGS): New macro.
3703 [!PTRACE_GET_WATCH_REGS] (enum pt_watch_style): New.
3704 [!PTRACE_GET_WATCH_REGS] (struct mips32_watch_regs): New.
3705 [!PTRACE_GET_WATCH_REGS] (struct mips64_watch_regs): New.
3706 [!PTRACE_GET_WATCH_REGS] (struct pt_watch_regs): New.
3708 2013-07-27 Yao Qi <yao@codesourcery.com>
3710 * breakpoint.h: Include break-common.h.
3711 (enum target_hw_bp_type): Move to ...
3712 * common/break-common.h: ... here. New.
3714 2013-07-26 Cyril Nikolaev <cyril@nichtverstehen.de>
3716 * inflow.c (terminal_init_inferior_with_pgrp): Save inferior
3717 process group regardless of having tty on stdin.
3719 2013-07-25 Doug Evans <dje@google.com>
3721 * linux-fork.h (detach_fork): Delete.
3723 2013-07-25 Tom Tromey <tromey@redhat.com>
3725 PR remote/15256, PR remote/15266:
3726 * bfd-target.c (target_bfd_reopen): Initialize to_magic.
3727 * monitor.c (monitor_detach): Use unpush_target.
3728 * remote-m32r-sdi.c (m32r_detach): Use unpush_target.
3729 * remote-mips.c (mips_detach): Use unpush_target. Don't
3731 * remote-sim.c (gdbsim_detach): Use unpush_target.
3732 * target.c (pop_target): Remove.
3733 (pop_all_targets_above): Don't call target_close.
3734 (target_close): Assert that the target is unpushed.
3735 * target.h (pop_target): Don't declare.
3736 * tracepoint.c (tfile_open): Use unpush_target.
3738 2013-07-25 Tom Tromey <tromey@redhat.com>
3740 * linux-thread-db.c (init_thread_db_ops): Call
3741 complete_target_initialization.
3742 (_initialize_thread_db): Don't call add_target.
3743 * target.c (complete_target_initialization): New function.
3744 (add_target_with_completer): Call it.
3745 * target.h (complete_target_initialization): Declare.
3747 2013-07-25 Mark Kettenis <kettenis@gnu.org>
3749 * hppa-tdep.h (enum hppa_regnum): Add members for all space registers.
3750 * hppaobsd-tdep.c (HPPAOBSD_SIZEOF_GREGS): Add comment.
3751 (HPPANBSD_SIZEOF_GREGS): New define.
3752 (hppaobsd_supply_gregset): Handle additional registers.
3753 * hppabsd-nat.c (hppabsd_gregset_supplies_p): Adjust to indicate
3754 we provide more registers now.
3755 (hppabsd_supply_gregset): Supply additional registers.
3756 (hppabsd_collect_gregset): Collect additional registers.
3758 2013-07-25 Mark Kettenis <kettenis@gnu.org>
3760 * hppabsd-tdep.c: Include "dwarf2-frame.h".
3761 (hppabsd_dwarf2_frame_init_reg): New function.
3762 (hppabsd_init_abi): Hook in the DWARF CFI frame unwinder.
3764 2013-07-25 Andrew Burgess <aburgess@broadcom.com>
3766 * mi/mi-main.c (output_register): Make MI 'r' format use standard
3767 'z' format code. Remove error for optimized out values, standard
3768 code will handle these fine.
3770 2013-07-25 Andrew Burgess <aburgess@broadcom.com>
3772 * NEWS: Mention new 'z' formatter.
3773 * printcmd.c (print_scalar_formatted): Add new 'z' formatter.
3774 (_initialize_printcmd): Mention 'z' formatter in help text of the
3777 2013-07-24 Maciej W. Rozycki <macro@codesourcery.com>
3779 * mips-tdep.c (micromips_deal_with_atomic_sequence): Correct
3782 2013-07-24 Sergio Durigan Junior <sergiodj@redhat.com>
3784 * breakpoint.c (create_longjmp_master_breakpoint): Check if probe
3785 interface can evaluate arguments. Fallback to the old mode if it
3787 (create_exception_master_breakpoint): Likewise.
3788 * elfread.c (elf_can_evaluate_probe_arguments): New function.
3789 (struct sym_probe_fns elf_probe_fns): Export function above to the
3791 * probe.c (can_evaluate_probe_arguments): New function.
3792 * probe.h (struct probe_ops) <can_evaluate_probe_arguments>: New
3794 (can_evaluate_probe_arguments): New function prototype.
3795 * solib-svr4.c (svr4_create_solib_event_breakpoints): Check if
3796 probe interface can evaluate arguments. Fallback to the old mode
3798 * stap-probe.c (stap_get_probe_argument_count): Check if probe
3799 interface can evaluate arguments. Warning the user if it cannot.
3800 (stap_can_evaluate_probe_arguments): New function.
3801 (struct probe_ops stap_probe_ops): Export function above to the
3803 * symfile.h (struct sym_probe_fns) <can_evaluate_probe_arguments>:
3804 New function pointer.
3806 2013-07-24 Luis Machado <lgustavo@codesourcery.com>
3808 * Makefile.in (SFILES): Add common/target-common.c.
3809 Add common/target-common.h to headers.
3810 (COMMON_OBS): Add target-common.o.
3811 (target-common.o): New target.
3812 * linux-nat.h (resume_kind): Move to common/target-common.h.
3813 * target.c (target_waitstatus_to_string): Move to
3814 common/target-common.c.
3815 * target.h: Include target-common.h.
3816 (target_waitkind): Move to common/target-common.h.
3817 (target_waitstatus): Likewise.
3818 (TARGET_WNOHANG): Likewise.
3819 * common/target-common.c: New file.
3820 * common/target-common.h: New file.
3822 2013-07-24 Doug Evans <dje@google.com>
3824 * dwarf2read.c (lookup_dwo_cutu): Change missing DWO complaint to
3827 2013-07-23 Yao Qi <yao@codesourcery.com>
3829 * i386-tdep.c (i386_in_stack_tramp_p): Remove unused
3830 parameter 'gdbarch'.
3831 (i386_stack_tramp_frame_sniffer): Caller update.
3832 * i386-linux-tdep.c (i386_linux_core_read_xcr0): Remove
3833 parameter 'gdbarch' and 'target'.
3834 (i386_linux_core_read_description): Caller update.
3835 * amd64-linux-tdep.c (amd64_linux_core_read_description):
3837 * i386-linux-tdep.h (i386_linux_core_read_xcr0): Update
3840 2013-07-23 Tom Tromey <tromey@redhat.com>
3842 * dwarf2read.c (init_cutu_and_read_dies): Revert patch from
3845 2013-07-22 Doug Evans <dje@google.com>
3847 * exec.h (remove_target_sections): Delete arg abfd.
3848 * exec.c (exec_close): Update call to remove_target_sections.
3849 (remove_target_sections): Delete arg abfd.
3850 * solib.c (update_solib_list): Ditto.
3851 (reload_shared_libraries_1): Ditto.
3852 (clear_solib): Ditto, and unconditionally call remove_target_sections.
3853 * target.h (struct target_section): Rename key to owner.
3856 2013-07-22 Tom Tromey <tromey@redhat.com>
3858 * solib-som.c (som_open_symbol_file_object): Call do_cleanups.
3860 2013-07-22 Tom Tromey <tromey@redhat.com>
3862 * dwarf2read.c (init_cutu_and_read_dies): Remove 'free_cu_cleanup'.
3863 Simplify cleanup handling.
3865 2013-07-22 Tom Tromey <tromey@redhat.com>
3867 * dwarf2read.c (dwarf_decode_line_header): Call do_cleanups
3868 on all return paths.
3870 2013-07-22 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
3872 * ppc-linux-nat.c (PPC_DEBUG_FEATURE_DATA_BP_DAWR): New define.
3873 (ppc_linux_region_ok_for_hw_watchpoint): Add checking to use the new
3874 DAWR interface for longer ranges hardware watchpoint (up to 512 bytes).
3876 2013-07-22 Phil Muldoon <pmuldoon@redhat.com>
3878 * top.c (print_gdb_version): Add help, apropos description and
3879 url to online documentation.
3881 2013-07-19 Hui Zhu <hui@codesourcery.com>
3884 * mi/mi-cmd-break.c (mi_argv_to_format): Handle double quotes.
3886 2013-07-19 Yao Qi <yao@codesourcery.com>
3888 * target.c (update_current_target): Change the default action
3889 of 'to_traceframe_info' from tcomplain to return_zero.
3890 * target.h (struct target_ops) <to_traceframe_info>: Add more
3892 * valops.c (read_value_memory): Call
3893 traceframe_available_memory unconditionally.
3895 2013-07-18 Yao Qi <yao@codesourcery.com>
3897 * coffread.c (coff_symfile_read): Iterate over minimal symbols,
3898 if the name is prefixed by "__imp_" or "_imp_", look for minimal
3899 symbol without prefix. If found, set its type to
3900 'mst_solib_trampoline'.
3902 2013-07-17 Doug Evans <dje@google.com>
3904 * NEWS: Mention "set print raw frame-arguments".
3905 * gdbcmd.h (setprintrawlist, showprintrawlist): Declare.
3906 * stack.c (print_raw_frame_arguments): New static global.
3907 (print_frame_arg): Set opts.raw from print_raw_frame_arguments.
3908 (_initialize_stack): New command "set/show print raw frame-arguments".
3909 * valprint.c (setprintrawlist, showprintrawlist): New globals.
3910 (set_print_raw, show_print_raw): New functions.
3911 (_initialize_valprint): New prefix command "set/show print raw".
3912 * valprint.h (value_print_options): Improve comments.
3914 * cli/cli-cmds.c (init_cmd_lists): Delete unnecessary initialization
3915 of all *list variables.
3917 * gdbcmd.h (togglelist): Delete.
3918 * cli/cli-cmds.c (togglelist): Delete.
3919 (init_cmd_lists): Update.
3920 * cli/cli-cmds.h (togglelist): Delete.
3922 2013-07-17 Tom Tromey <tromey@redhat.com>
3924 * dwarf2read.c (dwarf2_per_objfile_free): Clear
3927 2013-07-16 Doug Evans <dje@google.com>
3929 * nto-tdep.c (nto_relocate_section_addresses): Update,
3930 target_section.bfd deleted.
3931 * ppc64-tdep.c (ppc64_convert_from_func_ptr_addr): Ditto.
3932 * s390-tdep.c (s390_load): Ditto.
3933 * solib-aix.c (solib_aix_relocate_section_addresses): Ditto.
3935 2013-07-16 Andrew Burgess <aburgess@broadcom.com>
3937 * common/format.c (parse_format_string): Add checks for NULL
3938 character before calling strchr.
3940 2013-07-16 Doug Evans <dje@google.com>
3942 * solist.h (target_so_ops.find_and_open_solib): Clarify usage of
3943 temp_pathname argument.
3944 * nto-tdep.c (nto_find_and_open_solib): Fix setting of temp_pathname
3945 when opening the file fails.
3947 * target.h (struct target_section): Delete member bfd.
3948 All users updated to use the_bfd_section->owner instead.
3949 * exec.c (add_to_section_table): Assert bfd is expected value.
3950 Remove initialization of target_section.bfd.
3951 (remove_target_sections): Update.
3952 (section_table_available_memory): Update.
3953 (section_table_xfer_memory_partial): Update.
3954 (print_section_info): Update.
3955 (exec_set_section_address): Update.
3956 * record-full.c (record_full_core_xfer_partial): Update.
3957 * solib-svr4.c (svr4_relocate_section_addresses): Update.
3958 * solib-target.c (solib_target_relocate_section_addresses): Update.
3959 * symfile.c (build_section_addr_info_from_section_table): Update.
3960 * target.c (memory_xfer_live_readonly_partial): Update.
3961 (memory_xfer_partial_1): Update.
3963 2013-07-15 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
3965 * ppc-linux-nat.c: Since the new PowerPC specific ptrace interface is
3966 now available for embedded (BookE) and server (BookS) processors,
3967 correct mentions of 'booke' and adjust comments accordingly in order to
3968 avoid confusion. Rename struct 'booke_debug_info' to 'hwdebug_info'.
3969 (have_ptrace_booke_interface): Rename function and variable
3970 'have_ptrace_booke_interface' to 'have_ptrace_hwdebug_interface'.
3971 Rename struct 'booke_debug_info' to 'hwdebug_info'. Update all uses.
3972 (booke_cmp_hw_point): Rename function 'booke_cmp_hw_point' to
3973 'hwdebug_point_cmp'. Update all uses.
3974 (booke_find_thread_points_by_tid): Rename function
3975 'booke_find_thread_points_by_tid' to
3976 'hwdebug_find_thread_points_by_tid'. Update all uses.
3977 (booke_insert_point): Rename function 'booke_insert_point' to
3978 'hwdebug_insert_point'. Update all uses.
3979 (booke_remove_point): Rename function 'booke_remove_point' to
3980 'hwdebug_remove_point'. Update all uses.
3982 2013-07-15 Maciej W. Rozycki <macro@codesourcery.com>
3984 * mips-tdep.c (mips_gdbarch_init): Replace hardcoded magic
3985 numbers with enum values.
3987 2013-07-15 Ali Anwar <ali_anwar@codesourcery.com>
3990 * thread.c (thread_apply_all_command): Check for valid threads
3992 (thread_array_cleanup): New struct.
3993 (set_thread_refcount): New function.
3995 2013-07-11 Andrew Burgess <aburgess@broadcom.com>
3997 * infcmd.c (default_print_one_register_info): Reuse function
4000 2013-07-10 Tom Tromey <tromey@redhat.com>
4002 * Makefile.in (GDB_WARN_CFLAGS_NO_DEFS, ADA_EXP_C): New macros.
4003 (ada-exp.o): New target.
4005 2013-07-10 Sergio Durigan Junior <sergiodj@redhat.com>
4007 * mt-tdep.c (mt_registers_info): Call
4008 get_no_prettyformat_print_options instead of
4009 get_raw_print_options (regression by last patch from Doug
4012 2013-07-09 Pedro Alves <palves@redhat.com>
4014 Checked in by Joel Brobecker <brobecker@adacore.com>.
4015 * ada-lang.c (coerce_unspec_val_to_type): Use
4016 value_optimized_out_const.
4017 * value.c (value_optimized_out_const): New function.
4018 * value.h (value_optimized_out_const): New declaration.
4020 2013-07-09 Doug Evans <dje@google.com>
4022 * defs.h (enum val_prettyformat): Renamed from val_prettyprint.
4023 Enum values rename as well. All uses updated.
4024 * valprint.h (value_print_options): Rename member pretty to
4025 pretty format. Rename member prettyprint_arrays to
4026 prettyformat_arrays. Rename member prettyprint_structs to
4027 prettyformat_structs. All uses updated.
4028 (get_no_prettyformat_print_options): Renamed from
4029 get_raw_print_options.
4030 * valprint.c (get_no_prettyformat_print_options): Renamed from
4031 get_raw_print_options. All callers updated.
4032 (show_prettyformat_structs): Renamed from show_prettyprint_structs.
4033 All callers updated.
4034 (show_prettyformat_arrays): Renamed from show_prettyprint_arrays.
4035 All callers updated.
4036 (_initialize_valprint): Improve help text for "set print pretty" and
4039 2013-07-09 Andrew Burgess <aburgess@broadcom.com>
4041 * value.c (value_bits_valid): Revert previous change, and change
4042 by Pedro on 2013-07-04, due to regressions in
4043 gdb.dwarf2/implptr.exp and gdb.dwarf2/pieces.exp.
4045 2013-07-08 Andrew Burgess <aburgess@broadcom.com>
4046 Pedro Alves <palves@redhat.com>
4048 * value.c (value_bits_valid): If the value is not lval_computed
4049 or has no check validity handler then the answer is the
4050 optimized_out flag, otherwise defer to the handler.
4052 2013-07-06 Eli Zaretskii <eliz@gnu.org>
4054 * top.c (print_gdb_configuration): Explain in output of
4055 --configuration what does "relocatable" mean.
4057 * main.c (print_gdb_help): Regroup options in the --help text.
4058 See http://sourceware.org/ml/gdb-patches/2013-04/msg00362.html for
4059 the relevant discussions.
4061 2013-07-06 Yao Qi <yao@codesourcery.com>
4063 * breakpoint.h (struct breakpoint_ops) <create_breakpoints_sal>:
4064 Remove parameter 'lsal'.
4065 * breakpoint.c (create_breakpoint): Move local variable 'lsal'
4066 to inner block. Caller update.
4067 (base_breakpoint_create_breakpoints_sal): Update.
4068 (bkpt_create_breakpoints_sal): Likewise.
4069 (tracepoint_create_breakpoints_sal): Likewise.
4070 (strace_marker_create_breakpoints_sal): Get 'lsal' from the
4071 element 0 of vector 'canonical->sals'.
4073 2013-07-05 Luis Machado <lgustavo@codesourcery.com>
4075 * rs6000-tdep.c (rs6000_stab_reg_to_regnum): Return the real
4076 register number instead of the pseudo register one.
4077 (rs6000_dwarf2_reg_to_regnum): Likewise.
4079 2013-07-04 Pedro Alves <palves@redhat.com>
4081 * findvar.c (value_of_register): Use allocate_optimized_out_value
4082 if the register has been optimized out, instead of
4083 set_value_optimized_out.
4084 * frame-unwind.c (frame_unwind_got_optimized): Use
4085 allocate_optimized_out_value.
4087 2013-07-04 Pedro Alves <palves@redhat.com>
4089 * value.c (value_bits_valid): If the value is not lval_computed,
4090 or doesn't have a check_validity hook, assume the value is entirely
4093 2013-07-04 Andrew Burgess <aburgess@broadcom.com>
4095 * stack.c (read_frame_arg): No longer fetch lazy values.
4096 * value.c (value_optimized_out): If the value is not already
4097 marked optimized out, and is lazy then fetch it.
4098 (value_primitive_field): Move optimized out check to later in the
4099 function, after we have loaded any lazy values.
4100 (value_fetch_lazy): Use optimized out flag directly rather than
4101 calling optimized_out method.
4103 2013-07-04 Andrew Burgess <aburgess@broadcom.com>
4105 * valops.c: Don't include "user-regs.h".
4106 (value_fetch_lazy): Moved to value.c.
4107 * value.c: Include "user-regs.h".
4108 (value_fetch_lazy): Moved from valops.c.
4110 2013-07-04 Yao Qi <yao@codesourcery.com>
4113 2013-06-27 Yao Qi <yao@codesourcery.com>
4115 * common/create-version.sh: Update comments. Handle the case
4116 that TARGET_ALIAS is empty.
4118 2013-07-03 Pedro Alves <palves@redhat.com>
4120 * Makefile.in (config.status): Depend on development.sh.
4121 (aclocal_m4_deps): Add libmcheck.m4.
4122 * acinclude.m4: Include libmcheck.m4.
4123 * configure.ac: Source development.sh instead of setting
4124 'development' here. --enable-libmcheck/--disable-libmcheck code
4125 factored out to GDB_AC_LIBMCHECK. Run it.
4126 * development.sh: New file.
4127 * libmcheck.m4: New file.
4128 * configure: Regenerate.
4130 2013-07-02 Tom Tromey <tromey@redhat.com>
4132 * contrib/ari/update-web-ari.sh: Update for version.in change.
4134 2013-07-02 Tom Tromey <tromey@redhat.com>
4136 * common/ptid.h: Comment fixes.
4138 2013-07-01 Tom Tromey <tromey@redhat.com>
4140 * dwarf2read.c (dwarf2_get_dwz_file): Return NULL if
4141 .gnu_debugaltlink not found. Use bfd_get_alt_debug_link_info.
4142 (dwarf2_read_index, create_all_comp_units): Update.
4144 2013-07-01 Tom Tromey <tromey@redhat.com>
4146 * configure.ac (build_warnings): Add -Wold-style-definition.
4147 * configure: Rebuild.
4148 * machoread.c (_initialize_machoread): Use "(void)".
4149 * macrocmd.c (macro_inform_no_debuginfo): Fix formatting;
4152 2013-07-01 Tom Tromey <tromey@redhat.com>
4154 * configure.ac (build_warnings): Add -Wold-style-declaration.
4155 * configure: Rebuild.
4156 * dsrec.c (make_srec): Use "static const", not "const static".
4157 * h8300-tdep.c (h8300_breakpoint_from_pc): Use "static const",
4159 * mi/mi-parse.c (mi_no_values, mi_simple_values, mi_all_values):
4160 Use "static const", not "const static".
4161 * mn10300-tdep.c (mn10300_breakpoint_from_pc): Use "static const",
4163 * moxie-tdep.c (moxie_breakpoint_from_pc): Use "static const",
4165 * rs6000-tdep.c (rs6000_breakpoint_from_pc): Use "static const",
4167 * v850-tdep.c (v850_breakpoint_from_pc): Use "static const",
4169 (v850_dbtrap_breakpoint_from_pc): Likewise.
4170 * xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Use "static const",
4173 2013-07-01 Tom Tromey <tromey@redhat.com>
4175 * configure.ac (build_warnings): Add -Wmissing-parameter-type.
4176 * configure: Rebuild.
4178 2013-07-01 Pedro Alves <palves@redhat.com>
4180 * defs.h: Include "pathmax.h".
4181 * utils.c: Don't include sys/param.h.
4182 (gdb_realpath): Remove code that checks for MAXPATHLEN.
4183 * solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
4184 instead of MAXPATHLEN.
4185 * solib-sunos.c: Don't include sys/param.h.
4186 * xcoffread.c: Don't include sys/param.h.
4187 * bsd-kvm.c: Don't include sys/param.h.
4188 * darwin-nat.c: Don't include sys/param.h.
4189 (darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
4190 * darwin-nat-info.c: Don't include sys/param.h.
4191 * fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
4193 * i386obsd-nat.c: Don't include sys/param.h.
4194 * inf-child.c: Don't include sys/param.h.
4195 (inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
4196 * linux-fork.c: Don't include sys/param.h.
4197 (fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
4198 * linux-nat.c: Don't include sys/param.h.
4199 (linux_child_pid_to_exec_file, linux_proc_pending_signals)
4200 (linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
4201 * m68klinux-nat.c: Don't include sys/param.h.
4202 * nbsd-nat.c: Don't include sys/param.h.
4203 (nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
4204 * ppc-linux-nat.c: Don't include sys/param.h.
4205 * rs6000-nat.c: Don't include sys/param.h.
4206 * spu-linux-nat.c. Don't include sys/param.h.
4207 * windows-nat.c: Don't include sys/param.h.
4208 * xtensa-linux-nat.c: Don't include sys/param.h.
4209 * config/i386/nm-fbsd.h: Don't include sys/param.h.
4211 2013-07-01 Pedro Alves <palves@redhat.com>
4213 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add pathmax.
4214 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/pathmax.m4.
4215 * gnulib/aclocal.m4: Regenerate.
4216 * gnulib/config.in: Regenerate.
4217 * gnulib/configure: Regenerate.
4218 * gnulib/import/pathmax.h: New file.
4219 * gnulib/import/Makefile.am: Regenerate.
4220 * gnulib/import/Makefile.in: Regenerate.
4221 * gnulib/import/m4/gnulib-cache.m4: Regenerate.
4222 * gnulib/import/m4/gnulib-comp.m4: Regenerate.
4223 * gnulib/import/m4/pathmax.m4: New file.
4225 2013-07-01 Pedro Alves <palves@redhat.com>
4227 * configure.ac (GDBINIT): Define, depending on host.
4228 * go32-nat.c (init_go32_ops): Don't override gdbinit here.
4229 * top.c (PATH_MAX): Delete fallback definition.
4230 (GDBINIT_FILENAME): Delete.
4231 (gdbinit): Reimplement as const char array set to the GDBINIT
4233 * top.h (gdbinit): Make const.
4234 * configure, config.in: Regenerate.
4236 2013-07-01 Pedro Alves <palves@redhat.com>
4238 * cli/cli-cmds.c (source_script): Make 'file' parameter const.
4239 * cli/cli-cmds.h (source_script): Likewise.
4240 * exceptions.c (catch_command_errors_const): New function.
4241 * exceptions.h (catch_command_errors_const): Declare.
4242 * main.c (get_init_files): Make parameters const, and adjust.
4243 (captured_main): Make 'system_gdbinit', 'home_gdbinit' and
4244 'local_gdbinit' locals const. Adjust to use
4245 catch_command_errors_const.
4246 (print_gdb_help): Make 'system_gdbinit', 'home_gdbinit' and
4247 'local_gdbinit' locals const.
4249 2013-07-01 Pedro Alves <palves@redhat.com>
4251 * defs.h: Don't check HAVE_UNISTD_H before including <unistd.h>.
4252 (STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO): Delete.
4253 * tracepoint.c: Don't check HAVE_UNISTD_H before including
4256 2013-07-01 Pedro Alves <palves@redhat.com>
4258 Import the "unistd" gnulib module.
4259 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add "unistd".
4260 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/off_t.m4,
4261 import/m4/ssize_t.m4, import/m4/sys_types_h.m4 and
4262 import/m4/unistd_h.m4.
4263 * gnulib/aclocal.m4: Renenerate.
4264 * gnulib/config.in: Renenerate.
4265 * gnulib/configure: Renenerate.
4266 * gnulib/import/Makefile.am: Renenerate.
4267 * gnulib/import/Makefile.in: Renenerate.
4268 * gnulib/import/m4/gnulib-cache.m4: Renenerate.
4269 * gnulib/import/m4/gnulib-comp.m4: Renenerate.
4270 * gnulib/import/m4/off_t.m4: New file.
4271 * gnulib/import/m4/ssize_t.m4: New file.
4272 * gnulib/import/m4/sys_types_h.m4: New file.
4273 * gnulib/import/m4/unistd_h.m4: New file.
4274 * gnulib/import/sys_types.in.h: New file.
4275 * gnulib/import/unistd.c: New file.
4276 * gnulib/import/unistd.in.h: New file.
4278 2013-07-01 Pedro Alves <palves@redhat.com>
4280 * utils.c <pathconf/_PC_PATH_MAX use>: Check if _PC_PATH_MAX is
4281 defined instead of checking HAVE_UNISTD_H.
4283 2013-07-01 Pedro Alves <palves@redhat.com>
4285 Reimport gnulib from scratch.
4286 * gnulib/Makefile.in (aclocal_m4_deps): Remove reference to
4287 import/m4/onceonly.m4.
4288 * gnulib/aclocal.m4: Renegerate.
4289 * gnulib/config.in: Renegerate.
4290 * gnulib/configure: Renegerate.
4291 * gnulib/import/Makefile.in: Renegerate.
4292 * gnulib/import/extra/update-copyright: Renegerate.
4293 * gnulib/import/m4/onceonly.m4: Delete.
4295 2013-07-01 Pedro Alves <palves@redhat.com>
4297 * tui/tui-regs.c (pagination_enabled): Delete declaration.
4299 2013-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
4302 * remote.c (async_remote_interrupt_twice): Make it static.
4303 * remote.h (async_remote_interrupt_twice): Remove the declaration.
4305 2013-06-29 Sergio Durigan Junior <sergiodj@redhat.com>
4307 * ia64-linux-tdep.c: Include <ctype.h>.
4308 (ia64_linux_stap_is_single_operand): New function.
4309 (ia64_linux_init_abi): Initialize SystemTap related attributes.
4311 2013-06-28 Tom Tromey <tromey@redhat.com>
4313 * Makefile.in (version.c): Use version.in, not
4315 * common/create-version.sh: Likewise.
4316 * common/version.in: Move...
4317 * version.in: ...here.
4319 2013-06-28 Pedro Alves <palves@redhat.com>
4321 * infrun.c (set_observer_mode): Don't declare pagination_enabled
4323 * utils.h (pagination_enabled): Declare.
4325 2013-06-28 Pedro Alves <palves@redhat.com>
4327 * infrun.c (non_stop, non_stop_1, set_non_stop, show_non_stop):
4328 Move higher up in file.
4330 2013-06-28 Tom Tromey <tromey@redhat.com>
4332 * tracepoint.c (deprecated_readline_begin_hook)
4333 (deprecated_readline_hook, deprecated_readline_end_hook): Don't
4336 2013-06-28 Pedro Alves <palves@redhat.com>
4339 * tui/tui-regs.c (tui_get_register): Fetch value contents before
4340 checking if they're available.
4341 * value.c (value_available_contents_eq): Change comment.
4342 * value.h (value_available_contents_eq): Expand comment.
4344 2013-06-27 Tom Tromey <tromey@redhat.com>
4346 * target.c (find_run_target): Remove.
4347 * target.h (find_run_target): Remove.
4349 2013-06-27 Tom Tromey <tromey@redhat.com>
4351 * corelow.c (core_gdbarch): Now static.
4353 2013-06-27 Tom Tromey <tromey@redhat.com>
4355 * target.c (target_struct_index): Remove.
4357 2013-06-27 Pedro Alves <palves@redhat.com>
4359 * infrun.c: Remove comment describing the 'stepping over runtime
4360 loader dynamic symbol resolution code' mechanism; moved to
4363 2013-06-27 Pedro Alves <palves@redhat.com>
4365 * exceptions.c (catch_command_errors): Remove spurious space.
4366 * exceptions.h (catch_command_errors): Second parameter is "arg",
4369 2013-06-27 Yao Qi <yao@codesourcery.com>
4371 * common/create-version.sh: Update comments. Handle the case
4372 that TARGET_ALIAS is empty.
4374 2013-06-26 Pedro Alves <palves@redhat.com>
4376 * infrun.c (SOLIB_IN_DYNAMIC_LINKER): Delete macro and describing
4379 2013-06-26 Pedro Alves <palves@redhat.com>
4381 * infrun.c: Update comments on stepping over runtime loader
4382 dynamic symbol resolution code.
4384 2013-06-26 Sergio Durigan Junior <sergiodj@redhat.com>
4386 * ax-gdb.h (union exp_element): Forward declare.
4387 * parser-defs.h: Include expression.h.
4389 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
4391 * mips-tdep.c (fetch_mips_16): Use unmake_compact_addr.
4393 2013-06-26 Dmitry Kozlov <ddk@codesourcery.com>
4395 * tracepoint.c (trace_save): Extend tsave to save starttime, stoptime.
4397 2013-06-26 Dmitry Kozlov <ddk@codesourcery.com>
4399 Fix trace-status to output proper start-time and stop-time.
4400 * tracepoint.c (trace_status_command): Fix type of printf arg to
4401 prevent improper type conversion.
4402 (trace_status_mi): Likewise.
4404 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
4406 * mips-tdep.c (mips_next_pc): Fix a typo.
4408 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
4410 * mips-tdep.c (micromips_scan_prologue): Fix a typo.
4412 2013-06-26 Pedro Alves <pedro@codesourcery.com>
4413 Yao Qi <yao@codesourcery.com>
4415 * mi/mi-cmds.c (mi_cmds): Register -trace-frame-collected.
4416 * mi/mi-cmds.h (mi_cmd_trace_frame_collected): Declare.
4417 * mi/mi-main.c (print_variable_or_computed): New function.
4418 (mi_cmd_trace_frame_collected): New function.
4419 * tracepoint.c (find_trace_state_variable_by_number): New.
4420 (struct traceframe_info): Move to tracepoint.h
4421 (struct collection_list): Likewise.
4422 (do_collect_symbol): Include locals and arguments in the
4423 collected variables list.
4424 (clear_collection_list): Clear wholly collected variables list
4425 and computed variables list.
4426 (append_exp): New function.
4427 (encode_actions_1): Include variables in the wholly
4428 collected variables list. Include memory ranges and
4429 full-fledged expressions in the computed expressions list.
4430 (encode_actions): Move some code to ...
4431 Return the cleanup chain.
4432 (encode_actions_rsp): ... here. New function.
4433 (get_traceframe_location, get_traceframe_info): Remove static.
4434 * tracepoint.h (struct memrange): Moved from tracepoint.c.
4435 (struct collection_list): Moved from tracepoint.c. Add two
4436 new fields 'wholly_collected' and 'computed'.
4437 (find_trace_state_variable_by_number): Declare.
4438 (encode_actions): Adjust declaration.
4439 (encode_actions_rsp): Declare.
4440 (get_traceframe_info, get_traceframe_location): Declare.
4442 * NEWS: Mention new MI command -trace-frame-collected.
4444 2013-06-26 Pedro Alves <pedro@codesourcery.com>
4445 Yao Qi <yao@codesourcery.com>
4447 * ctf.c (ctf_traceframe_info): Push trace state variables
4448 present in the trace data into the traceframe info object.
4449 * breakpoint.c (DEF_VEC_I): Remove.
4450 * common/filestuff.c (DEF_VEC_I): Likewise.
4451 * dwarf2loc.c (DEF_VEC_I): Likewise.
4452 * mi/mi-main.c (DEF_VEC_I): Likewise.
4453 * common/gdb_vecs.h (DEF_VEC_I): Define vector for int.
4454 * features/traceframe-info.dtd: Add tvar element and its
4456 * tracepoint.c (free_traceframe_info): Free vector 'tvars'.
4457 (build_traceframe_info): Push trace state variables present in
4458 the trace data into the traceframe info object.
4459 (traceframe_info_start_tvar): New function.
4460 (tvar_attributes): New.
4461 (traceframe_info_children): Add "tvar" element.
4462 * tracepoint.h (struct traceframe_info) <tvars>: New field.
4464 * NEWS: Mention the change in GDB and GDBserver.
4466 2013-06-26 Pedro Alves <pedro@codesourcery.com>
4467 Yao Qi <yao@codesourcery.com>
4469 * tracepoint.c (trace_dump_command): Move code to ...
4470 (get_traceframe_location): ... here. New.
4472 2013-06-26 Pedro Alves <pedro@codesourcery.com>
4473 Yao Qi <yao@codesourcery.com>
4475 * tracepoint.c (trace_dump_command): GDB emits an error
4476 instead of a warning when a traceframe is not selected.
4478 2013-06-26 Pedro Alves <pedro@codesourcery.com>
4479 Yao Qi <yao@codesourcery.com>
4481 * tracepoint.c (tracepoint_list, stepping_list): Remove.
4482 (clear_collection_list): Free fields 'aexpre_list' and 'list'
4484 (do_clear_collection_list, init_collection_list): New.
4485 (encode_actions): Add local variables 'tracepoint_list' and
4486 'stepping_list'. Call init_collection_list and make cleanup
4487 which calls do_clear_collection_list. Don't call
4488 clear_collection_list.
4489 (_initialize_tracepoint): Delete references to
4490 'tracepoint_list' and 'stepping_list'.
4492 2013-06-25 Tom Tromey <tromey@redhat.com>
4494 * common/create-version.sh (date): Use "$", not "$$" in sed
4497 2013-06-25 Kevin Buettner <kevinb@redhat.com>
4499 * NEWS (New targets): Add entry for TI MSP430.
4501 2013-06-25 Yao Qi <yao@codesourcery.com>
4503 * remote.c (remote_start_remote): Move code to upload tsv
4506 2013-06-25 Yao Qi <yao@codesourcery.com>
4507 Hui Zhu <hui@codesourcery.com>
4508 Pedro Alves <palves@redhat.com>
4510 PR breakpoints/15075
4511 PR breakpoints/15434
4512 * breakpoint.c (bpstat_stop_status): Call
4513 b->ops->after_condition_true.
4514 (update_dprintf_command_list): Don't append "continue" command
4515 to the command list of dprintf breakpoint.
4516 (base_breakpoint_after_condition_true): New function.
4517 (base_breakpoint_ops): Add base_breakpoint_after_condition_true.
4518 (dprintf_after_condition_true): New function.
4519 (initialize_breakpoint_ops): Set dprintf_after_condition_true.
4520 * breakpoint.h (breakpoint_ops): Add after_condition_true.
4522 2013-06-24 Kevin Buettner <kevinb@redhat.com>
4524 * Makefile.in (ALL_TARGET_OBS): Add msp430-tdep.o.
4525 (ALLDEPFILES): Add msp430-tdep.c.
4526 * configure.tgt (msp430*-*-elf): New target.
4527 * msp430-tdep.c: New file.
4529 2013-06-24 Maciej W. Rozycki <macro@codesourcery.com>
4531 * mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
4532 microMIPS synthetic symbols.
4534 2013-06-24 Maciej W. Rozycki <macro@codesourcery.com>
4536 * objfiles.h (pc_in_section): New prototype.
4537 (in_plt_section): Remove name argument, replace prototype with
4538 static inline function.
4539 * mips-tdep.h: Include "objfiles.h".
4540 (in_mips_stubs_section): New function.
4541 * hppa-tdep.h (gdbarch_tdep): Remove name argument of
4542 in_solib_call_trampoline member.
4543 (hppa_in_solib_call_trampoline): Remove name argument.
4544 * objfiles.c (pc_in_section): New function.
4545 (in_plt_section): Remove function.
4546 * mips-linux-tdep.c: Include "objfiles.h".
4547 (mips_linux_in_dynsym_stub): Call in_mips_stubs_section. Remove
4548 name argument. Return 1 rather than the low 16-bit halfword of
4549 any instruction examined.
4550 (mips_linux_in_dynsym_resolve_code): Update
4551 mips_linux_in_dynsym_stub call accordingly.
4552 * mips-tdep.c (mips_stub_frame_sniffer): Use in_mips_stubs_section
4553 rather than an equivalent hand-coded sequence.
4554 * hppa-hpux-tdep.c (in_opd_section): Remove function.
4555 (hppa32_hpux_in_solib_call_trampoline): Remove name argument.
4556 (hppa64_hpux_in_solib_call_trampoline): Likewise.
4557 (hppa64_hpux_find_global_pointer): Use pc_in_section rather than
4559 * hppa-tdep.c (hppa_stub_unwind_sniffer): Remove name argument
4560 on call to tdep->in_solib_call_trampoline.
4561 (hppa_in_solib_call_trampoline): Remove name argument, update
4562 according to in_plt_section change.
4563 (hppa_skip_trampoline_code): Update according to in_plt_section
4565 * aarch64-tdep.c (aarch64_stub_unwind_sniffer): Likewise.
4566 * arm-symbian-tdep.c (arm_symbian_skip_trampoline_code):
4568 * arm-tdep.c (arm_stub_unwind_sniffer): Likewise.
4569 * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
4570 * hppabsd-tdep.c (hppabsd_find_global_pointer): Likewise.
4571 * nios2-tdep.c (nios2_stub_frame_sniffer): Likewise.
4572 * nto-tdep.c (nto_relocate_section_addresses): Likewise.
4573 * s390-tdep.c (s390_stub_frame_sniffer): Likewise.
4574 * sh-tdep.c (sh_stub_unwind_sniffer): Likewise.
4575 * solib-dsbt.c (dsbt_in_dynsym_resolve_code): Likewise.
4576 * solib-frv.c (frv_in_dynsym_resolve_code): Likewise.
4577 * solib-svr4.c (svr4_in_dynsym_resolve_code): Likewise.
4578 * solib-target.c (solib_target_in_dynsym_resolve_code): Likewise.
4579 * sparc-tdep.c (sparc_analyze_prologue): Likewise.
4580 * tic6x-tdep.c (tic6x_stub_unwind_sniffer): Likewise.
4582 2013-06-24 Joel Brobecker <brobecker@adacore.com>
4584 * common/create-version.sh: Fix expansion of $host_alias
4585 and $target_alias in generation of HOST_NAME and TARGET_NAME
4588 2013-06-24 Tom Tromey <tromey@redhat.com>
4590 * common/create-version.sh: New file.
4591 * Makefile.in (version.c): Use bfd/version.h, common/version.in,
4593 (HFILES_NO_SRCDIR): Use common/version.h.
4594 * version.in: Move to ...
4595 * common/version.in: ... here. Replace date with "DATE".
4596 * version.h: Move to ...
4597 * common/version.h: ... here.
4599 2013-06-21 Joel Brobecker <brobecker@adacore.com>
4601 * gdb/gnulib/Makefile.in: Update date in copyright header.
4602 * gdb/gnulib/configure.ac: Ditto.
4603 * gdb/gnulib/update-gnulib.sh: Ditto.
4605 2013-06-21 Joel Brobecker <brobecker@adacore.com>
4607 * copyright.py (EXCLUDE_LIST): Replace "gdb/gnulib" by
4608 "gdb/gnulib/import".
4610 2013-06-21 Will Newton <will.newton@linaro.org>
4612 * doublest.c (ldfrexp): Remove function.
4613 (convert_doublest_to_floatformat): Call frexpl instead of
4616 2013-06-21 Will Newton <will.newton@linaro.org>
4618 * gnulib/update-gnulib.sh(IMPORTED_GNULIB_MODULES): Add frexpl.
4619 * gnulib/aclocal.m4: Regenerate.
4620 * gnulib/config.in: Regenerate.
4621 * gnulib/configure: Regenerate.
4622 * gnulib/import/Makefile.am: Update.
4623 * gnulib/import/Makefile.in: Update.
4624 * gnulib/import/m4/gnulib-cache.m4: Update.
4625 * gnulib/import/m4/gnulib-comp.m4: Update.
4626 * gnulib/import/float+.h: Import.
4627 * gnulib/import/float.c: Import.
4628 * gnulib/import/float.in.h: Import.
4629 * gnulib/import/fpucw.h: Import.
4630 * gnulib/import/frexp.c: Import.
4631 * gnulib/import/frexpl.c: Import.
4632 * gnulib/import/isnan.c: Import.
4633 * gnulib/import/isnand-nolibm.h: Import.
4634 * gnulib/import/isnand.c: Import.
4635 * gnulib/import/isnanl-nolibm.h: Import.
4636 * gnulib/import/isnanl.c: Import.
4637 * gnulib/import/itold.c: Import.
4638 * gnulib/import/m4/exponentd.m4: Import.
4639 * gnulib/import/m4/exponentl.m4: Import.
4640 * gnulib/import/m4/float_h.m4: Import.
4641 * gnulib/import/m4/fpieee.m4: Import.
4642 * gnulib/import/m4/frexp.m4: Import.
4643 * gnulib/import/m4/frexpl.m4: Import.
4644 * gnulib/import/m4/isnand.m4: Import.
4645 * gnulib/import/m4/isnanl.m4: Import.
4646 * gnulib/import/m4/math_h.m4: Import.
4647 * gnulib/import/math.c: Import.
4648 * gnulib/import/math.in.h: Import.
4650 2013-06-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4652 * common/linux-btrace.c (cpu_supports_btrace): Remove variable vendor,
4653 replace strcmp with signature_INTEL_ebx, signature_INTEL_ecx and
4654 signature_INTEL_edx comparisons.
4656 2013-06-20 Doug Evans <dje@google.com>
4659 * dwarf2read.c (try_open_dwop_file): New arg search_cwd.
4660 All callers updated.
4661 (open_dwp_file): If we can't find the dwp file, search the basename
4662 in debug-file-directory.
4664 * dwarf2read.c (struct dwp_file): Fix comment.
4665 (open_and_init_dwp_file): Set dwp_file->name to bfd's file name.
4667 * source.c (openp): Document OPF_TRY_CWD_FIRST+OPF_SEARCH_IN_PATH
4670 2013-06-20 Yao Qi <yao@codesourcery.com>
4672 * breakpoint.c (create_breakpoint): Fix code indentation.
4674 2013-06-20 Yao Qi <yao@codesourcery.com>
4676 * breakpoint.c (create_breakpoints_sal_default): Remove
4677 parameter 'lsal'. Update declaration.
4678 (bkpt_create_breakpoints_sal): Caller update.
4679 (tracepoint_create_breakpoints_sal): Likewise.
4681 2013-06-20 Pedro Alves <pedro@codesourcery.com>
4682 Yao Qi <yao@codesourcery.com>
4684 * NEWS: Mention the new option '--skip-unavailable' of command
4685 -data-list-register-values.
4686 * mi/mi-main.c (mi_cmd_data_list_register_values): Accept the
4687 --skip-unavailable option. Adjust to use output_register.
4688 (output_register): Add new 'skip_unavailable' parameter.
4691 2013-06-19 Mike Frysinger <vapier@gentoo.org>
4693 * Makefile.in (HFILES_NO_SRCDIR): Add common/i386-cpuid.h and
4694 common/i386-gcc-cpuid.h.
4695 * common/i386-cpuid.h: New wrapper header around i386-gcc-cpuid.h.
4696 * common/i386-gcc-cpuid.h: Rename from testsuite/gdb.arch/i386-cpuid.h.
4697 Copy the latest version from upstream gcc.
4698 * common/linux-btrace.c: Include i386-cpuid.h.
4699 (intel_supports_btrace): Delete x86 ifdefs and replace inline asm with
4701 (cpu_supports_btrace): Likewise.
4702 * go32-nat.c: Include i386-cpuid.h.
4703 (go32_sysinfo): Add (disabled) calls to i386_cpuid with comments.
4705 2013-06-19 Doug Evans <dje@google.com>
4707 * symfile.c (symfile_bfd_open): Delete unnecessary declaration.
4708 (get_section_index): Ditto.
4710 2013-06-19 Tom Tromey <tromey@redhat.com>
4712 * breakpoint.c (_initialize_breakpoint): Remove trailing \n from
4715 2013-06-18 Doug Evans <dje@google.com>
4717 * dwarf2read.c (dw2_symtab_iter_next): Check value of cu_index
4719 (dw2_expand_symtabs_matching): Fix symbol kind validity check.
4720 Move test of cu_index closer to use. Print complaint if cu_index
4723 2013-06-18 Joel Brobecker <brobecker@adacore.com>
4725 * machoread.c (oso_vector): Delete this global.
4726 (macho_register_oso): Add new parameter "oso_vector_ptr".
4727 Use it instead of the "oso_vector" global.
4728 (macho_symtab_read, macho_symfile_read_all_oso): Likewise.
4729 (macho_symfile_read): Use a local oso_vector, to be free'ed
4730 at the end of this function, in place of the old "oso_vector"
4731 global. Update various function calls accordingly. Use one
4732 single cleanup chain for the entire function.
4734 2013-06-18 Joel Brobecker <brobecker@adacore.com>
4736 * dwarf2read.c (dwarf2_per_objfile_free): Replace uses of
4737 DWARF2_PER_OBJFILE by uses of DATA instead.
4739 2013-06-18 Tom Tromey <tromey@redhat.com>
4741 * break-catch-sig.c (signal_catchpoint_explains_signal): Add 'sig'
4743 * breakpoint.c (bpstat_explains_signal): Add 'sig' argument.
4744 Special case signals other than GDB_SIGNAL_TRAP.
4745 (explains_signal_watchpoint): New function.
4746 (base_breakpoint_explains_signal): Add 'sig' argument.
4747 (initialize_breakpoint_ops): Set 'explains_signal' method for
4749 * breakpoint.h (struct breakpoint_ops) <explains_signal>: Add
4751 (bpstat_explains_signal): Likewise.
4752 * infrun.c (handle_syscall_event, handle_inferior_event): Update.
4754 2013-06-18 Tom Tromey <tromey@redhat.com>
4756 * python/py-inferior.c (gdbpy_selected_inferior): Don't incref.
4758 2013-06-18 Tom Tromey <tromey@redhat.com>
4760 * python/python.c (finish_python_initialization): Decref
4761 'pythondir' on failure path as well.
4763 2013-06-18 Tom Tromey <tromey@redhat.com>
4766 * dwarf2loc.c (read_pieced_value): Truncate this_size_bits
4767 after taking bits_to_skip into account. Sign extend byte_offset.
4768 * utils.h (gdb_sign_extend): Declare.
4769 * utils.c (gdb_sign_extend): New function.
4771 2013-06-18 Jan Kratochvil <jan.kratochvil@redhat.com>
4773 * dwarf2read.c (write_psymtabs_to_index): Ignore NULL PSYMTAB.
4775 2013-06-17 Pierre Muller <muller@sourceware.org>
4777 * corelow.c (core_open): Print GDB signal name instead of target
4780 2013-06-17 Mike Frysinger <vapier@gentoo.org>
4782 * .gitignore: Add /gcore.
4784 2013-06-13 Doug Evans <dje@google.com>
4786 * dwarf2read.c (try_open_dwop_file): Work around behaviour of
4787 OPF_TRY_CWD_FIRST to not search path if the file contains a '/'.
4789 2013-06-12 Phil Muldoon <pmuldoon@redhat.com>
4791 * stack.c (backtrace_command_1): Fix indentation.
4793 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4795 * window-nat.c (thread_rec): Add missing empty line after
4796 local variable declaration.
4798 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4800 * windows-nat.c (thread_rec): Revert format used to print
4801 error code returned by SuspendThread from %d back to %u.
4803 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4805 * windows-nat.c (windows_continue): Add "0x" prefix for thread
4807 (get_windows_debug_event): Likewise, for all debug traces.
4809 2013-06-11 Joel Brobecker <brobecker@adacore.com>
4811 * window-nat.c (thread_rec): Add thread ID in SuspendThread
4814 2013-06-08 Pedro Alves <pedro@codesourcery.com>
4815 Yao Qi <yao@codesourcery.com>
4817 * mi/mi-main.c (get_register): Remove declaration.
4818 (output_register): Declare.
4819 (mi_cmd_data_list_register_values): Remove local variable
4820 'tuple_cleanup'. Move some code into output_register.
4821 (get_register): Renamed to ...
4822 (output_register): ... this. Output the register's
4823 "number" ui_out tuple here.
4825 2013-06-07 Pedro Alves <palves@redhat.com>
4827 * darwin-nat.c: Fix formating in copyright header.
4828 * darwin-nat.h: Likewise.
4829 * gnu-nat.c: Likewise.
4830 * machoread.c: Likewise.
4832 2013-06-07 Pedro Alves <palves@redhat.com>
4835 * regformats/regdat.sh: Output #include tdesc.h. Make globals
4836 static. Output a global target description pointer.
4837 (init_registers_${name}): Adjust to initialize a
4838 target description structure.
4840 2013-06-07 Will Newton <will.newton@linaro.org>
4842 * printcmd.c (build_address_symbolic): Call
4843 gdbarch_addr_bits_remove for text minimal symbols.
4845 2013-06-07 Will Newton <will.newton@linaro.org>
4847 * MAINTAINERS: Add myself to Write After Approval.
4849 2013-06-07 Yao Qi <yao@codesourcery.com>
4851 * tracepoint.c (start_tracing): Move code to ...
4852 (trace_reset_local_state): ... here. New.
4853 (disconnect_tracing): Don't call set_current_traceframe,
4854 set_tracepoint_num, and set_traceframe_context. Call
4855 trace_reset_local_state instead.
4856 (tfile_close): Call trace_reset_local_state.
4857 * ctf.c (ctf_close): Likewise.
4858 * remote.c (remote_close): Likewise.
4859 * tracepoint.h (trace_reset_local_state): Declare.
4861 2013-06-06 Doug Evans <dje@google.com>
4863 * dwarf2read.c: Whitespace fixes for DWP file format documentation,
4864 and fix header docs.
4866 2013-06-05 Doug Evans <dje@google.com>
4867 Keith Seitz <keiths@redhat.com>
4870 * cp-namespace.c (find_symbol_in_baseclass): Call
4871 cp_lookup_symbol_in_namespace instead of cp_lookup_symbol_namespace.
4872 Check result of call to lookup_symbol_static.
4873 Call lookup_static_symbol_aux unconditionally.
4874 Call check_typedef on base types before accessing them.
4875 (cp_lookup_nested_symbol): Fix comment.
4877 2013-06-05 Luis Machado <lgustavo@codesourcery.com>
4879 * gnu-v3-abi.c (gnuv3_skip_trampoline): Handle thunk
4880 minimal symbols pointing to function descriptors.
4882 2013-06-05 Tom Tromey <tromey@redhat.com>
4884 * python/py-utils.c (gdb_pymodule_addobject): Cast away const.
4886 2013-06-04 Sergio Durigan Junior <sergiodj@redhat.com>
4887 Pedro Alves <palves@redhat.com>
4889 * remote.c (remote_wait_as): Restore signal handler before returning
4890 when GDB gets a notification.
4892 2013-06-04 Gary Benson <gbenson@redhat.com>
4895 * breakpoint.h (handle_solib_event): Moved function declaration
4897 * breakpoint.c (handle_solib_event): Moved function to solib.c.
4898 (bpstat_stop_status): Pass new argument to handle_solib_event.
4899 * solib.h (update_solib_breakpoints): New function declaration.
4900 (handle_solib_event): Moved function declaration from
4902 * solib.c (update_solib_breakpoints): New function.
4903 (handle_solib_event): Moved function from breakpoint.c.
4904 Updated to call solib_ops->handle_event if not NULL.
4905 * solist.h (target_so_ops): New fields "update_breakpoints" and
4907 * infrun.c (set_stop_on_solib_events): New function.
4908 (_initialize_infrun): Use the above for "set
4909 stop-on-solib-events".
4910 (handle_inferior_event): Pass new argument to handle_solib_event.
4911 * solib-svr4.c (probe.h): New include.
4912 (svr4_free_library_list): New forward declaration.
4913 (probe_action): New enum.
4914 (probe_info): New struct.
4915 (probe_info): New static variable.
4916 (NUM_PROBES): New definition.
4917 (svr4_info): New fields "using_xfer", "probes_table" and
4919 (free_probes_table): New function.
4920 (free_solib_list): New function.
4921 (svr4_pspace_data_cleanup): Free probes table and solib list.
4922 (svr4_copy_library_list): New function.
4923 (svr4_current_sos_via_xfer_libraries): New parameter "annex".
4924 (svr4_read_so_list): New parameter "prev_lm".
4925 (svr4_current_sos_direct): Renamed from "svr4_current_sos".
4926 (svr4_current_sos): New function.
4927 (probe_and_action): New struct.
4928 (hash_probe_and_action): New function.
4929 (equal_probe_and_action): Likewise.
4930 (register_solib_event_probe): Likewise.
4931 (solib_event_probe_at): Likewise.
4932 (solib_event_probe_action): Likewise.
4933 (solist_update_full): Likewise.
4934 (solist_update_incremental): Likewise.
4935 (disable_probes_interface_cleanup): Likewise.
4936 (svr4_handle_solib_event): Likewise.
4937 (svr4_update_solib_event_breakpoint): Likewise.
4938 (svr4_update_solib_event_breakpoints): Likewise.
4939 (svr4_create_solib_event_breakpoints): Likewise.
4940 (enable_break): Free probes table before creating breakpoints.
4941 Use svr4_create_solib_event_breakpoints to create breakpoints.
4942 (svr4_solib_create_inferior_hook): Free the solib list.
4943 (_initialize_svr4_solib): Initialise
4944 svr4_so_ops.handle_solib_event and svr4_so_ops.update_breakpoints.
4946 2013-06-04 Gary Benson <gbenson@redhat.com>
4948 * target.h (target_ops): New field
4949 "to_augmented_libraries_svr4_read".
4950 (target_augmented_libraries_svr4_read): New macro.
4951 * target.c (update_current_target): Handle
4952 to_augmented_libraries_svr4_read.
4953 * remote.c (remote_state): New field
4954 "augmented_libraries_svr4_read".
4955 (remote_augmented_libraries_svr4_read_feature): New function.
4956 (remote_protocol_features): Add entry for
4957 "augmented-libraries-svr4-read".
4958 (remote_augmented_libraries_svr4_read): New function.
4959 (init_remote_ops): Initialize
4960 remote_ops.to_augmented_libraries_svr4_read.
4962 2013-06-04 Gary Benson <gbenson@redhat.com>
4966 2013-06-04 Gary Benson <gbenson@redhat.com>
4968 * objfiles.h (inhibit_section_map_updates): New function
4970 (resume_section_map_updates): Likewise.
4971 (resume_section_map_updates_cleanup): Likewise.
4972 * objfiles.c (objfile_pspace_info): Removed field
4973 "objfiles_changed_p". New fields "new_objfiles_available",
4974 "section_map_dirty" and "inhibit_updates".
4975 (allocate_objfile): Set new_objfiles_available.
4976 (free_objfile): Set section_map_dirty.
4977 (objfile_relocate1): Likewise.
4978 (in_plt_section): Likewise.
4979 (find_pc_section): Update the conditions under which the
4980 section map will be updated.
4981 (inhibit_section_map_updates): New function.
4982 (resume_section_map_updates): Likewise.
4983 (resume_section_map_updates_cleanup): Likewise.
4985 2013-06-04 Gary Benson <gbenson@redhat.com>
4987 * probe.h (get_probe_argument_count): New declaration.
4988 (evaluate_probe_argument): Likewise.
4989 * probe.c (get_probe_argument_count): New function.
4990 (evaluate_probe_argument): Likewise.
4991 (probe_safe_evaluate_at_pc): Use the above new functions.
4993 2013-06-04 Alan Modra <amodra@gmail.com>
4995 * ppc-tdep.h (ppc_insns_match_pattern): Update prototype.
4996 * rs6000-tdep.c (read_insn): Add frame param, don't assume big-endian.
4997 (ppc_insns_match_pattern): Add frame param. Avoid multiple
4998 target mem reads on optional insns.
4999 * ppc-linux-tdep.c (ppc_skip_trampoline_code): Update
5000 ppc_insns_match_pattern calls.
5001 * ppc64-tdep.c (ppc64_standard_linkage2, ppc64_standard_linkage3):
5002 Add match for power7 thread safety insns, and new order of
5003 std 2,40(1) insn. Correct code shown for _dl_runtime_resolve
5004 invocation in comment, and update rest of comment.
5005 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN,
5006 PPC64_STANDARD_LINKAGE3_LEN): Delete.
5007 (ppc64_standard_linkage2_target): Update insn offsets.
5008 (ppc64_skip_trampoline_code): Use a single insn buffer. Match newer
5009 stubs first. Update calls.
5011 2013-06-04 Yao Qi <yao@codesourcery.com>
5013 * solib.c (solib_find): Don't need dir separator if path has
5016 2013-06-03 Joel Brobecker <brobecker@adacore.com>
5018 Revert (indirectly causes a SIGSEGV):
5019 * machoread.c (macho_symfile_read): Assign first cleanup to
5022 2013-06-03 Yao Qi <yao@codesourcery.com>
5024 * mi/mi-cmd-var.c (mi_no_values, mi_simple_values): Move to
5025 mi-parse.c. Make them static.
5026 (mi_all_values): Likewise.
5027 (mi_parse_values_option): Move to mi-parse.c. Rename it to
5028 mi_parse_print_values. Make it external.
5029 * mi/mi-cmds.h (mi_no_values, mi_simple_values, mi_all_values):
5030 Remove the declarations.
5031 * mi/mi-parse.c (mi_parse_print_values): Moved from mi-cmd-var.c.
5032 * mi/mi-parse.h (mi_parse_print_values): Declare.
5033 * mi/mi-cmd-stack.c: Include mi-parse.h.
5034 (parse_print_values): Remove
5035 (mi_cmd_stack_list_locals): Call mi_parse_print_values instead
5036 of parse_print_values.
5037 (mi_cmd_stack_list_args, mi_cmd_stack_list_variables): Likewise.
5039 2013-05-31 Pedro Alves <pedro@codesourcery.com>
5040 Yao Qi <yao@codesourcery.com>
5042 * tracepoint.c (all_tracepoint_actions_and_cleanup): Declare.
5043 (encode_actions): Move code to ...
5044 (all_tracepoint_actions_and_cleanup): ... here. New.
5045 (trace_dump_command): Likewise.
5047 2013-05-30 Tom Tromey <tromey@redhat.com>
5049 * symmisc.c (maintenance_expand_symtabs): Call do_cleanups.
5051 2013-05-30 Tom Tromey <tromey@redhat.com>
5053 * xml-support.c (gdb_xml_create_parser_and_cleanup): Rename from
5054 gdb_xml_create_parser_and_cleanup_1. Return a cleanup. Remove
5055 'old_chain' argument. Add 'parser_result' argument.
5056 (gdb_xml_create_parser_and_cleanup): Remove old version.
5057 (gdb_xml_parse_quick): Update.
5058 (xml_process_xincludes): Update.
5059 * xml-support.h (gdb_xml_create_parser_and_cleanup): Don't
5062 2013-05-30 Tom Tromey <tromey@redhat.com>
5064 * probe.c (collect_probes): Check arguments for NULL before
5065 calling compile_rx_or_error.
5066 * utils.c (compile_rx_or_error): Require 'rx' to be non-NULL.
5069 2013-05-30 Tom Tromey <tromey@redhat.com>
5071 * infrun.c (adjust_pc_after_break): Introduce an outer null
5074 2013-05-30 Tom Tromey <tromey@redhat.com>
5076 * mi/mi-cmd-var.c (varobj_update_one): Add an outer null cleanup.
5078 2013-05-30 Tom Tromey <tromey@redhat.com>
5080 * cli/cli-script.c (read_command_lines_1): Use a null cleanup
5081 for 'old_chain'. Do not check 'head' before processing
5084 2013-05-30 Tom Tromey <tromey@redhat.com>
5086 * mi/mi-cmd-stack.c (list_arg_or_local): Remove
5089 2013-05-30 Tom Tromey <tromey@redhat.com>
5091 * dbxread.c (dbx_read_symtab): Declare 'back_to' in a more
5092 inner scope. Unconditionally call do_cleanups.
5094 2013-05-30 Tom Tromey <tromey@redhat.com>
5096 * source.c (find_and_open_source): Call do_cleanups.
5098 2013-05-30 Tom Tromey <tromey@redhat.com>
5100 * linux-thread-db.c (thread_db_load_search): Unconditionally
5103 2013-05-30 Tom Tromey <tromey@redhat.com>
5105 * solib-aix.c (solib_aix_bfd_open): Don't use a null cleanup
5106 for 'cleanup'; instead use a later one.
5108 2013-05-30 Tom Tromey <tromey@redhat.com>
5110 * python/py-breakpoint.c (bppy_get_commands): Use
5111 explicit, unconditional return.
5112 * python/py-frame.c (frapy_read_var): Likewise.
5113 * python/python.c (gdbpy_decode_line): Likewise.
5115 2013-05-30 Tom Tromey <tromey@redhat.com>
5117 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Call
5118 do_cleanups on all return paths.
5120 2013-05-30 Tom Tromey <tromey@redhat.com>
5122 * top.c (execute_command): Discard 'cleanup_if_error' cleanups.
5124 2013-05-30 Tom Tromey <tromey@redhat.com>
5126 * stabsread.c (read_struct_type): Call do_cleanups along
5129 2013-05-30 Maciej W. Rozycki <macro@codesourcery.com>
5131 * mips-linux-tdep.c: Adjust formatting throughout.
5133 2013-05-30 Tom Tromey <tromey@redhat.com>
5135 * mipsread.c (read_alphacoff_dynamic_symtab): Call do_cleanups
5136 along all return paths.
5138 2013-05-30 Tom Tromey <tromey@redhat.com>
5140 * symfile.c (find_separate_debug_file): Call do_cleanups
5141 along all return paths.
5143 2013-05-30 Tom Tromey <tromey@redhat.com>
5145 * symtab.c (search_symbols): Introduce a null cleanup for
5148 2013-05-30 Tom Tromey <tromey@redhat.com>
5150 * python/py-value.c (valpy_binop): Call do_cleanups before
5153 2013-05-30 Tom Tromey <tromey@redhat.com>
5155 * python/py-prettyprint.c (print_children): Remove extra
5158 2013-05-30 Tom Tromey <tromey@redhat.com>
5160 * python/py-frame.c (frapy_read_var): Call do_cleanups along
5163 2013-05-30 Tom Tromey <tromey@redhat.com>
5165 * python/py-breakpoint.c (bppy_get_commands): Call do_cleanups
5166 along all return paths.
5168 2013-05-30 Tom Tromey <tromey@redhat.com>
5170 * cli/cli-logging.c (set_logging_redirect): Unconditionally
5173 2013-05-30 Tom Tromey <tromey@redhat.com>
5175 * varobj.c (c_value_of_root): Call do_cleanups along all
5178 2013-05-30 Tom Tromey <tromey@redhat.com>
5180 * tracepoint.c (trace_dump_command): Unconditionally call
5183 2013-05-30 Tom Tromey <tromey@redhat.com>
5185 * breakpoint.c (output_thread_groups, parse_cmd_to_aexpr): Call
5186 do_cleanups earlier.
5188 2013-05-30 Tom Tromey <tromey@redhat.com>
5190 * machoread.c (macho_symfile_read): Assign first cleanup to
5193 2013-05-30 Tom Tromey <tromey@redhat.com>
5195 * m32r-rom.c (m32r_load): Call do_cleanups at all returns.
5197 2013-05-30 Tom Tromey <tromey@redhat.com>
5199 * mi/mi-main.c (list_available_thread_groups): Call do_cleanups.
5201 2013-05-30 Tom Tromey <tromey@redhat.com>
5203 * inf-ptrace.c (inf_ptrace_create_inferior): Unconditionally
5204 call discard_cleanups.
5205 (inf_ptrace_attach): Likewise.
5207 2013-05-30 Tom Tromey <tromey@redhat.com>
5209 * remote-mips.c (mips_exit_debug): Call do_cleanups on all
5211 (mips_initialize): Likewise.
5212 (common_open): Call do_cleanups.
5214 2013-05-30 Tom Tromey <tromey@redhat.com>
5216 * utils.c (internal_vproblem): Call do_cleanups.
5218 2013-05-30 Tom Tromey <tromey@redhat.com>
5220 * linespec.c (find_linespec_symbols): Don't reassign to 'cleanup'.
5222 2013-05-30 Tom Tromey <tromey@redhat.com>
5224 * cli/cli-script.c (setup_user_args): Don't return after error.
5226 2013-05-30 Tom Tromey <tromey@redhat.com>
5228 * somread.c (som_symtab_read): Call do_cleanups.
5230 2013-05-30 Tom Tromey <tromey@redhat.com>
5232 * printcmd.c (print_command_1): Unconditionally call do_cleanups.
5234 2013-05-30 Tom Tromey <tromey@redhat.com>
5236 * cli/cli-cmds.c (cd_command, alias_command): Call do_cleanups.
5237 * cli/cli-dump.c (restore_binary_file): Call do_cleanups.
5238 * interps.c (interpreter_exec_cmd): Call do_cleanups.
5239 * source.c (show_substitute_path_command): Call do_cleanups.
5240 (unset_substitute_path_command, set_substitute_path_command):
5242 * symfile.c (load_command): Call do_cleanups.
5244 2013-05-30 Tom Tromey <tromey@redhat.com>
5246 * contrib/cleanup_check.py: New file.
5247 * contrib/gcc-with-excheck: Add option parsing.
5249 2013-05-30 Joel Brobecker <brobecker@adacore.com>
5251 * windows-nat.c (windows_delete_thread): Add missing space
5254 2013-05-30 Hafiz Abid Qadeer <abidh@codesourcery.com>
5256 * inferior.c (top level): Include tilde.h.
5257 (add_inferior_command): Call tilde_expand on the value of 'exec'
5260 2013-05-30 Pedro Alves <pedro@codesourcery.com>
5261 Yao Qi <yao@codesourcery.com>
5263 * tracepoint.c (encode_actions_1): Remove parameter 't'.
5265 (encode_actions): Likewise.
5266 * remote.c (remote_download_tracepoint): Caller update.
5267 * tracepoint.h (encode_actions): Update declaration.
5269 2013-05-30 Pedro Alves <palves@redhat.com>
5271 * python/python-internal.h (gdb_Py_DECREF): Cast OP to PyObject
5274 2013-05-30 Yao Qi <yao@codesourcery.com>
5276 * remote.c (remote_check_symbols): Remove unused parameter
5279 (remote_start_remote, remote_new_objfile): Caller update.
5281 2013-05-30 Yao Qi <yao@codesourcery.com>
5283 * mi/mi-cmds.c (mi_cmds): Define MI command
5284 '-exec-arguments' by macro DEF_MI_CMD_CLI_1 instead of
5287 2013-05-29 Pedro Alves <palves@redhat.com>
5289 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint)
5290 (remote_insert_watchpoint, remote_remove_watchpoint)
5291 (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
5292 (remote_verify_memory, compare_sections_command)
5293 (remote_search_memory): Set the general process/thread on the
5296 2013-05-29 Pedro Alves <palves@redhat.com>
5298 * aarch64-tdep.c: Don't include "features/aarch64-without-fpu.c".
5299 (_initialize_aarch64_tdep): Don't call
5300 initialize_tdesc_aarch64_without_fpu.
5301 * features/Makefile (WHICH): Remove reference to
5302 aarch64-without-fpu.
5303 * features/aarch64-without-fpu.c: Delete file.
5304 * regformats/aarch64-without-fpu.dat: Delete file.
5306 2013-05-28 Yao Qi <yao@codesourcery.com>
5308 * tracepoint.c (stringify_collection_list): Remove parameter
5310 (encode_actions): Caller update. Remove local variables.
5312 2013-05-24 Yao Qi <yao@codesourcery.com>
5314 * tracepoint.c (TFILE_PID): Remove.
5315 (tfile_open): Don't add thread and inferior.
5316 (tfile_close): Don't set 'inferior_ptid'. Don't call
5317 exit_inferior_silent.
5318 (tfile_thread_alive): Remove.
5319 (init_tfile_ops): Don't set field 'to_thread_alive' of
5322 2013-05-23 Doug Evans <dje@google.com>
5324 * contrib/cc-with-tweaks.sh (-p): Handle no dwo files.
5326 2013-05-23 Pedro Alves <palves@redhat.com>
5328 * common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
5329 [HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
5330 (socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
5331 Only define if HAVE_SOCKETS is defined.
5332 * configure.ac: Check for sys/socket.h.
5333 * config.in, configure: Regenerate.
5335 2013-05-23 Pedro Alves <palves@redhat.com>
5337 * dwarf2read.c (create_dwp_hash_table, create_dwo_in_dwp)
5338 (open_and_init_dwp_file): Use %s/pulongest instead of %u for
5339 printing uint32_t variables.
5341 2013-05-23 Pedro Alves <palves@redhat.com>
5343 * NEWS: Mention GDBserver range stepping support.
5345 2013-05-23 Yao Qi <yao@codesourcery.com>
5346 Pedro Alves <palves@redhat.com>
5348 * gdbthread.h (struct thread_control_state) <may_range_step>: New
5350 * infcmd.c (step_once, until_next_command): Enable range stepping.
5351 * infrun.c (displaced_step_prepare): Disable range stepping.
5352 (resume): Disable range stepping if stepping over a breakpoint or
5353 we have software watchpoints. If range stepping is enabled,
5354 assert the thread is in the stepping range.
5355 (clear_proceed_status_thread): Clear may_range_step.
5356 (handle_inferior_event): Disable range stepping as soon as we know
5357 the thread that hit the event. Re-enable it whenever we're going
5358 to step with a step range.
5359 * remote.c (struct vCont_action_support) <r>: New field.
5360 (use_range_stepping): New global.
5361 (remote_vcont_probe): Handle 'r' action.
5362 (append_resumption): Append an 'r' action if the thread may range
5364 (show_range_stepping): New function.
5365 (set_range_stepping): New function.
5366 (_initialize_remote): Call add_setshow_boolean_cmd to register the
5367 'set range-stepping' and 'show range-stepping' commands.
5368 * NEWS: Mention range stepping, the new vCont;r action, and the
5369 new "set/show range-stepping" commands.
5371 2013-05-23 Yao Qi <yao@codesourcery.com>
5372 Pedro Alves <palves@redhat.com>
5374 * remote.c (struct vCont_action_support): New struct.
5375 (struct remote_state) <support_vCont_t>: Remove field.
5376 <vCont_actions_support>: New field.
5377 (remote_vcont_probe, remote_stop_ns): Update.
5379 2013-05-23 Yao Qi <yao@codesourcery.com>
5380 Pedro Alves <palves@redhat.com>
5382 * gdbthread.h (pc_in_thread_step_range): New declaration.
5383 * thread.c (pc_in_thread_step_range): New function.
5384 * infrun.c (handle_inferior_event): Use it.
5386 2013-05-23 Joel Brobecker <brobecker@adacore.com>
5388 * mi/mi-cmd-break.c (mi_argv_to_format): Use xsnprintf instead
5391 2013-05-22 Keith Seitz <keiths@redhat.com>
5393 * ada-lang.c (is_known_support_routine): Add explicit free of
5394 'func_name' from find_frame_funname.
5395 (ada_unhandled_exception_name_addr_from_raise): Add cleanups
5396 for func_name from find_frame_funname.
5397 * python/py-frame.c (frapy_name): Add explicit free of
5398 'name' from find_frame_funname.
5399 * stack.c (find_frame_funname): Add comment explaining that
5400 funcp must be freed by the caller.
5401 Return copy of symbol names instead of pointers.
5402 (print_frame): Add a cleanup for 'funname' from
5404 * stack.h (find_frame_funname): Remove "const" from
5405 'funname' parameter.
5407 2013-05-22 Tom Tromey <tromey@redhat.com>
5410 * c-valprint.c (c_value_print): Use value_addr for
5411 references. Convert back to reference type with value_ref.
5413 2013-05-22 Eli Zaretskii <eliz@gnu.org>
5415 * windows-nat.c (handle_unload_dll): Don't call solib_add for the
5416 unloaded DLL, it will be done by handle_solib_event. See
5417 http://sourceware.org/ml/gdb-patches/2013-05/msg00713.html for the
5420 2013-05-22 Phil Muldoon <pmuldoon@redhat.com>
5422 * ui-out.c: Create typedef ui_out_level_p and define vector
5423 operations for that type.
5424 (struct ui_out): Use a vector instead of an array.
5425 (current_level): Return level from a vector.
5426 (push_level): Create a level in a vector.
5427 (pop_level): Delete a level in a vector.
5428 (ui_out_new): Create initial level zero level, and store in a
5430 (ui_out_destroy): Add vector cleanup.
5432 2013-05-22 Pedro Alves <palves@redhat.com>
5434 * python/python-internal.h (gdb_Py_DECREF): Tag with
5435 "ARI: editCase function".
5437 2013-05-21 Paul Pluzhnikov <ppluzhnikov@google.com>
5439 * solib-svr4.c (svr4_free_so): Protect against NULL dereference.
5441 2013-05-21 Pedro Alves <palves@redhat.com>
5443 * python/py-prettyprint.c (apply_val_pretty_printer): Check
5444 whether PRINTER is NULL before installing a Py_DECREF cleanup.
5445 * python/py-utils.c (py_decref): Don't check for NULL before
5448 2013-05-21 Pedro Alves <palves@redhat.com>
5450 * python/py-utils.c (py_decref): Remove extra braces.
5451 (gdb_pymodule_addobject): Remove extra braces.
5452 * python-internal.h (gdb_Py_DECREF): New static inline function.
5453 (Py_DECREF): Redefine as calling gdb_Py_DECREF.
5455 2013-05-21 Philippe Waroquiers <philippe.waroquiers@skynet.be>
5457 * breakpoints.c (detach_breakpoints): Do not
5458 detach breakpoints locations with loc_type bp_loc_other.
5460 2013-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
5462 Workaround Python 2.6.
5463 * python/py-utils.c (gdb_pymodule_addobject): Wrap Py_DECREF into
5466 2013-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
5468 Code cleanup: constification.
5469 * solib.c (solib_ops): Make return type and ops variable type const.
5470 (set_solib_ops): Make the new_ops parameter and ops variable const.
5471 (solib_find, solib_map_sections, clear_so, free_so, update_solib_list)
5472 (solib_add, solib_keep_data_in_core, clear_solib)
5473 (solib_create_inferior_hook, in_solib_dynsym_resolve_code)
5474 (reload_shared_libraries, solib_global_lookup): Make the ops variable
5476 * solib.h (set_solib_ops): Make the new_ops parameter const.
5478 2013-05-21 Joel Brobecker <brobecker@adacore.com>
5480 * data-directory/Makefile.in (SYSTEM_GDBINIT_SRCDIR): New
5482 (VPATH): Add SYSTEM_GDBINIT_SRCDIR.
5483 (SYSTEM_GDBINIT_DIR, SYSTEM_GDBINIT_INSTALL_DIR)
5484 (SYSTEM_GDBINIT_FILES): New variables.
5485 (all): Add stamp-system-gdbinit.
5486 (stamp-system-gdbinit): New rule.
5487 (clean-system-gdbinit, install-system-gdbinit)
5488 (uninstall-system-gdbinit): New rules. Make them .PHONY.
5489 (install-only): Add dependency on install-system-gdbinit.
5490 (uninstall): Add dependency on uninstall-system-gdbinit.
5491 (clean): Add dependency on clean-system-gdbinit.
5492 * system-gdbinit/elinos.py: New file.
5493 * system-gdbinit/wrs-linux.py: New file.
5495 2013-05-21 Joel Brobecker <brobecker@adacore.com>
5497 * ada-lang.c (old_renaming_is_invisible): Fix cleanup leak.
5499 2013-05-21 Hui Zhu <hui@codesourcery.com>
5501 * breakpoint.c (dprintf_breakpoint_ops): Remove its static.
5502 * breakpoint.h (dprintf_breakpoint_ops): Add extern.
5503 * mi/mi-cmd-break.c (ctype.h): New include.
5504 (gdb_obstack.h): New include.
5505 (mi_argv_to_format, mi_cmd_break_insert_1): New.
5506 (mi_cmd_break_insert): Call mi_cmd_break_insert_1.
5507 (mi_cmd_dprintf_insert): New.
5508 * mi/mi-cmds.c (mi_cmds): Add "dprintf-insert".
5509 * mi/mi-cmds.h (mi_cmd_dprintf_insert): New extern.
5511 2013-05-20 Tom Tromey <tromey@redhat.com>
5513 * python/py-prettyprint.c (search_pp_list): Decref 'attr'.
5515 2013-05-20 Tom Tromey <tromey@redhat.com>
5517 * python/py-value.c (valpy_get_dynamic_type): Simplify
5518 dynamic_type assignment. Use Py_XINCREF.
5520 2013-05-20 Tom Tromey <tromey@redhat.com>
5522 * python/py-type.c (typy_fields): Unconditionally decref 'r'.
5524 2013-05-20 Tom Tromey <tromey@redhat.com>
5526 * python/py-frame.c (frapy_older, frapy_newer, gdbpy_newest_frame)
5527 (gdbpy_selected_frame): Move object-construction code
5530 2013-05-20 Tom Tromey <tromey@redhat.com>
5532 * python/py-arch.c (gdbpy_initialize_arch): Use
5533 gdb_pymodule_addobject.
5534 * python/py-block.c (gdbpy_initialize_blocks): Use
5535 gdb_pymodule_addobject.
5536 * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Use
5537 gdb_pymodule_addobject.
5538 * python/py-cmd.c (gdbpy_initialize_breakpoints): Use
5539 gdb_pymodule_addobject.
5540 * python/py-event.c (gdbpy_initialize_event_generic): Use
5541 gdb_pymodule_addobject.
5542 * python/py-evtregistry.c (gdbpy_initialize_eventregistry): Use
5543 gdb_pymodule_addobject.
5544 * python/py-evts.c (add_new_registry): Use
5545 gdb_pymodule_addobject.
5546 (gdbpy_initialize_py_events): Likewise.
5547 * python/py-finishbreakpoint.c
5548 (gdbpy_initialize_finishbreakpoints): Use
5549 gdb_pymodule_addobject.
5550 * python/py-frame.c (gdbpy_initialize_frames): Use
5551 gdb_pymodule_addobject.
5552 * python/py-function.c (gdbpy_initialize_functions): Use
5553 gdb_pymodule_addobject.
5554 * python/py-inferior.c (gdbpy_initialize_inferior): Use
5555 gdb_pymodule_addobject.
5556 * python/py-infthread.c (gdbpy_initialize_thread): Use
5557 gdb_pymodule_addobject.
5558 * python/py-objfile.c (gdbpy_initialize_objfile): Use
5559 gdb_pymodule_addobject.
5560 * python/py-param.c (gdbpy_initialize_parameters): Use
5561 gdb_pymodule_addobject.
5562 * python/py-progspace.c (gdbpy_initialize_pspace): Use
5563 gdb_pymodule_addobject.
5564 * python/py-symbol.c (gdbpy_initialize_symbols): Use
5565 gdb_pymodule_addobject.
5566 * python/py-symtab.c (gdbpy_initialize_symtabs): Use
5567 gdb_pymodule_addobject.
5568 * python/py-type.c (gdbpy_initialize_types): Use
5569 gdb_pymodule_addobject.
5570 * python/py-utils.c (gdb_pymodule_addobject): New function.
5571 * python/py-value.c (gdbpy_initialize_values): Use
5572 gdb_pymodule_addobject.
5573 * python/python-internal.h (gdb_pymodule_addobject): Declare.
5574 * python/python.c (_initialize_python): Use
5575 gdb_pymodule_addobject.
5577 2013-05-20 Tom Tromey <tromey@redhat.com>
5579 * python/py-cmd.c (cmdpy_completer): Use explicit decref.
5580 * python/py-param.c (get_set_value, get_show_value): Use
5582 * python/python.c (start_type_printers, apply_type_printers):
5583 Use explicit decrefs.
5585 2013-05-20 Tom Tromey <tromey@redhat.com>
5587 * python/py-evts.c (gdbpy_initialize_py_events): Don't
5590 2013-05-20 Tom Tromey <tromey@redhat.com>
5592 * python/python.c (gdbpy_run_events): Decref the result
5593 of PyObject_CallObject.
5595 2013-05-20 Tom Tromey <tromey@redhat.com>
5597 * python/py-symtab.c (set_sal): Use
5598 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION. Return -1 on error.
5599 (symtab_and_line_to_sal_object): Update.
5601 2013-05-20 Tom Tromey <tromey@redhat.com>
5603 * python/py-param.c (compute_enum_values): Decref 'item'.
5605 2013-05-20 Tom Tromey <tromey@redhat.com>
5607 * mi/mi-main.c: Include python-internal.h.
5608 (mi_cmd_list_features): Check gdb_python_initialized.
5609 * python/py-inferior.c (python_on_normal_stop, python_on_resume)
5610 (python_inferior_exit, python_new_objfile, add_thread_object)
5611 (delete_thread_object, py_free_inferior): Check
5612 gdb_python_initialized.
5613 * python/py-prettyprint.c (apply_val_pretty_printer): Check
5614 gdb_python_initialized.
5615 * python/py-type.c (save_objfile_types): Check
5616 gdb_python_initialized.
5617 * python/python-internal.h (gdb_python_initialized): Declare.
5618 * python/python.c (ensure_python_env): Throw exception if
5619 Python not initialized.
5620 (before_prompt_hook, source_python_script_for_objfile)
5621 (start_type_printers, apply_type_printers,
5622 free_type_printers): Check gdb_python_initialized.
5623 * varobj.c (varobj_get_display_hint)
5624 (dynamic_varobj_has_child_method, update_dynamic_varobj_children)
5625 (install_new_value_visualizer, varobj_set_visualizer)
5626 (value_get_print_value): Check gdb_python_initialized.
5628 2013-05-20 Tom Tromey <tromey@redhat.com>
5630 * python/py-arch.c (gdbpy_initialize_arch): Return 'int'.
5632 * python/py-auto-load.c (gdbpy_initialize_auto_load): Return 'int'.
5633 * python/py-block.c (gdbpy_initialize_blocks): Return 'int'.
5635 * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Return 'int'.
5637 * python/py-cmd.c (gdbpy_initialize_commands): Return 'int'.
5639 * python/py-event.c (gdbpy_initialize_event): Return 'int'.
5641 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Change generated
5642 init function to return 'int'.
5643 * python/py-evtregistry.c (gdbpy_initialize_eventregistry):
5644 Return 'int'. Check errors.
5645 * python/py-evts.c (gdbpy_initialize_py_events): Return 'int'.
5647 * python/py-finishbreakpoint.c (gdbpy_initialize_finishbreakpoints):
5648 Return 'int'. Check errors.
5649 * python/py-frame.c (gdbpy_initialize_frames): Return 'int'.
5651 * python/py-function.c (gdbpy_initialize_functions): Return 'int'.
5653 * python/py-gdb-readline.c (gdbpy_initialize_gdb_readline):
5655 * python/py-inferior.c (gdbpy_initialize_inferior): Return 'int'.
5657 * python/py-infthread.c (gdbpy_initialize_thread): Return 'int'.
5659 * python/py-lazy-string.c (gdbpy_initialize_lazy_string): Return 'int'.
5661 * python/py-objfile.c (gdbpy_initialize_objfile): Return 'int'.
5663 * python/py-param.c (gdbpy_initialize_parameters): Return 'int'.
5665 * python/py-progspace.c (gdbpy_initialize_pspace): Return 'int'.
5667 * python/py-symbol.c (gdbpy_initialize_symbols): Return 'int'.
5669 * python/py-symtab.c (gdbpy_initialize_symtabs): Return 'int'.
5671 * python/py-type.c (gdbpy_initialize_types): Return 'int'.
5673 * python/py-value.c (gdbpy_initialize_values): Return 'int'.
5675 * python/python-internal.h (gdbpy_initialize_auto_load,
5676 gdbpy_initialize_values, gdbpy_initialize_frames,
5677 gdbpy_initialize_symtabs, gdbpy_initialize_commands,
5678 gdbpy_initialize_symbols, gdbpy_initialize_symtabs,
5679 gdbpy_initialize_blocks, gdbpy_initialize_types,
5680 gdbpy_initialize_functions, gdbpy_initialize_pspace,
5681 gdbpy_initialize_objfile, gdbpy_initialize_breakpoints,
5682 gdbpy_initialize_finishbreakpoints,
5683 gdbpy_initialize_lazy_string, gdbpy_initialize_parameters,
5684 gdbpy_initialize_thread, gdbpy_initialize_inferior,
5685 gdbpy_initialize_eventregistry, gdbpy_initialize_event,
5686 gdbpy_initialize_py_events, gdbpy_initialize_stop_event,
5687 gdbpy_initialize_signal_event,
5688 gdbpy_initialize_breakpoint_event,
5689 gdbpy_initialize_continue_event,
5690 gdbpy_initialize_exited_event, gdbpy_initialize_thread_event,
5691 gdbpy_initialize_new_objfile_event, gdbpy_initialize_arch):
5692 Update. Use CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
5693 * python/python.c (gdb_python_initialized): New global.
5694 (gdbpy_initialize_events): Return 'int'. Check errors.
5695 (_initialize_python): Check errors. Set
5696 gdb_python_initialized.
5698 2013-05-20 Tom Tromey <tromey@redhat.com>
5700 * python/py-finishbreakpoint.c (bpfinishpy_out_of_scope):
5701 Decref the reslut of PyObject_CallMethod.
5703 2013-05-20 Tom Tromey <tromey@redhat.com>
5705 * python/py-event.c (gdbpy_initialize_event_generic): Return
5706 early if PyType_Ready fails.
5708 2013-05-20 Tom Tromey <tromey@redhat.com>
5710 * python/py-type.c (make_fielditem): Add gdb_assert_not_reached
5711 as 'default' in the switch.
5713 2013-05-20 Tom Tromey <tromey@redhat.com>
5715 * python/py-inferior.c (gdbpy_inferiors): Update. Hoist
5716 get_addr_from_python calls out of TRY_CATCH.
5717 (infpy_write_memory, infpy_search_memory): Likewise.
5718 * python/py-utils.c (get_addr_from_python): Return negative
5719 value on error. Use TRY_CATCH.
5720 * python/python-internal.h (get_addr_from_python): Use
5721 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
5723 2013-05-20 Tom Tromey <tromey@redhat.com>
5725 * python/py-event.c (evpy_emit_event): Decref the
5726 result of PyObject_CallFunctionObjArgs.
5728 2013-05-20 Tom Tromey <tromey@redhat.com>
5730 * python/py-cmd.c (cmdpy_completer): Use iterator protocol.
5733 2013-05-20 Tom Tromey <tromey@redhat.com>
5735 * python/py-cmd.c (cmdpy_init): Decref 'ds_obj'.
5737 2013-05-20 Tom Tromey <tromey@redhat.com>
5739 * python/py-event.h (gdbpy_initialize_event_generic): Use
5740 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
5741 * python/py-evts.c (add_new_registry): Use
5742 CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
5743 * python/python-internal.h
5744 (CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION): New macro.
5746 2013-05-20 Tom Tromey <tromey@redhat.com>
5748 * python/py-arch.c (archpy_disassemble): Update.
5749 * python/py-type.c (typy_get_composite, typy_lookup_typename)
5750 (typy_lookup_type): Use GDB_PY_HANDLE_EXCEPTION.
5751 * python/py-utils.c (gdbpy_convert_exception): Return 'void'.
5752 * python/python-internal.h (CPYCHECKER_SETS_EXCEPTION): New
5754 (GDB_PY_HANDLE_EXCEPTION): Update.
5755 (gdbpy_convert_exception): Update. Use CPYCHECKER_SETS_EXCEPTION.
5757 2013-05-20 Tom Tromey <tromey@redhat.com>
5759 * python/python-internal.h (events_object_type): Remove.
5761 2013-05-20 Tom Tromey <tromey@redhat.com>
5763 * python/py-event.h (evpy_emit_event): Use
5764 CPYCHECKER_STEALS_REFERENCE_TO_ARG.
5765 * python/python-internal.h (CPYCHECKER_STEALS_REFERENCE_TO_ARG):
5768 2013-05-20 Tom Tromey <tromey@redhat.com>
5770 * py-evtregistry.c (create_event_object): Decref
5771 eventregistry_object if PyList_New fails.
5773 2013-05-20 Tom Tromey <tromey@redhat.com>
5775 * py-cmd.c (gdbpy_string_to_argv): Check result of
5778 2013-05-20 Tom Tromey <tromey@redhat.com>
5780 * python/python.c (before_prompt_hook): Add cleanup to
5783 2013-05-20 Tom Tromey <tromey@redhat.com>
5785 * python/py-function.c (fnpy_init): Decref result of
5786 PyObject_GetAttrString.
5788 2013-05-20 Tom Tromey <tromey@redhat.com>
5790 * python/py-threadevent.c (get_event_thread): Use
5791 CPYCHECKER_RETURNS_BORROWED_REF.
5792 * python/python-internal.h (CPYCHECKER_RETURNS_BORROWED_REF):
5794 (pspace_to_pspace_object, objfile_to_objfile_object)
5795 (find_thread_object): Use it.
5797 2013-05-20 Tom Tromey <tromey@redhat.com>
5799 * python/py-arch.c (arch_object_type): Use
5800 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5801 * python/py-block.c (block_syms_iterator_object_type):
5802 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5803 * python/py-bpevent.c (breakpoint_event_object_type):
5804 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5805 * python/py-cmd.c (cmdpy_object_type): Use
5806 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5807 * python/py-continueevent.c (continue_event_object_type):
5808 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5809 * python/py-event.h (GDBPY_NEW_EVENT_TYPE):
5810 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5811 * python/py-events.h (thread_event_object_type):
5812 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5813 * python/py-evtregistry.c (eventregistry_object_type): Use
5814 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5815 * python/py-exitedevent.c (exited_event_object_type):
5816 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5817 * python/py-finishbreakpoint.c (finish_breakpoint_object_type):
5818 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5819 * python/py-function.c (fnpy_object_type): Use
5820 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5821 * python/py-inferior.c (inferior_object_type, membuf_object_type):
5822 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5823 * python/py-infthread.c (thread_object_type): Use
5824 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5825 * python/py-lazy-string.c (lazy_string_object_type):
5826 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5827 * python/py-newobjfileevent.c (new_objfile_event_object_type):
5828 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5829 * python/py-objfile.c (objfile_object_type): Use
5830 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5831 * python/py-param.c (parmpy_object_type):
5832 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5833 * python/py-progspace.c (pspace_object_type):
5834 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5835 * python/py-signalevent.c (signal_event_object_type):
5836 Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5837 * python/py-symtab.c (symtab_object_type, sal_object_type): Use
5838 CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5839 * python/py-type.c (type_object_type, field_object_type)
5840 (type_iterator_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5841 * python/py-internal.h (CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF): New
5843 (value_object_type, block_object_type, symbol_object_type)
5844 (event_object_type, stop_event_object_type, breakpoint_object_type)
5845 (frame_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
5847 2013-05-20 Andreas Tobler <andreas@fgznet.ch>
5849 * Makefile.in (ALL_TARGET_OBS): Add ppcfbsd-tdep.o.
5850 (ALLDEPFILES): Add ppcfbsd-nat.c and ppcfbsd-tdep.c.
5852 2013-05-20 Doug Evans <dje@google.com>
5854 When reading CU, stay in DWO. Be more tolerent of bad debug info.
5856 * dwarf2read.c (struct dwarf2_per_cu_data): New member
5857 reading_dwo_directly.
5858 (struct signatured_type): New member dwo_unit.
5859 (struct die_reader_specs): New member comp_dir.
5860 (create_signatured_type_table_from_index): Use malloc for
5861 all_type_units instead of objfile's obstack.
5862 (create_all_type_units): Ditto.
5863 (fill_in_sig_entry_from_dwo_entry): New function.
5864 (add_type_unit): New function.
5865 (lookup_dwo_signatured_type): New function.
5866 (lookup_dwp_signatured_type): New function.
5867 (lookup_signatured_type): New arg cu. All callers updated.
5868 (init_cu_die_reader): Initialize comp_dir.
5869 (read_cutu_die_from_dwo): New arg stub_comp_dir. All callers updated.
5870 Change assert of matching type signatures to call error on mismatch.
5871 (lookup_dwo_unit): Add assert.
5872 (init_tu_and_read_dwo_dies): New function.
5873 (init_cutu_and_read_dies): Call it.
5874 (build_type_unit_groups): Handle case of no type unit groups created.
5875 (hash_dwo_file, eq_dwo_file): Handle missing comp_dir.
5876 (lookup_dwo_cutu): Tweak complaint.
5877 (dwarf2_free_abbrev_table): Check for NULL abbrev_table.
5878 (dwarf2_per_objfile_free): Free all_type_units.
5880 2013-05-20 Joel Brobecker <brobecker@adacore.com>
5882 * windows-nat.c (handle_unload_dll): Add missing empty line.
5884 2013-05-20 Joel Brobecker <brobecker@adacore.com>
5886 * dwarf2read.c (prototyped_function_p): New function.
5887 (read_subroutine_type): Use it.
5889 2013-05-20 Joel Brobecker <brobecker@adacore.com>
5891 * rs6000-aix-tdep.c: De-indent some example code provided
5894 2013-05-17 Edjunior Machado <emachado@linux.vnet.ibm.com>
5896 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Check if the
5897 region is ok for a hardware watchpoint using the new ptrace interface
5900 2013-05-17 Doug Evans <dje@google.com>
5902 * NEWS: Mention new maintenance commands check-symtabs, and
5903 expand-symtabs, and renamed check-psymtabs.
5904 * psymtab.c (maintenance_check_psymtabs): Renamed from
5905 maintenance_check_symtabs. Only process already-expanded symbol
5907 (_initialize_psymtab): Update.
5908 * symmisc.c (maintenance_check_symtabs): New function.
5909 (maintenance_expand_name_matcher): New function
5910 (maintenance_expand_file_matcher): New function
5911 (maintenance_expand_symtabs): New function.
5912 (_initialize_symmisc): Add "mt check-symtabs" and "mt expand-symtabs"
5915 2013-05-17 Tom Tromey <tromey@redhat.com>
5917 * python/py-inferior.c (infpy_read_memory): Don't call
5918 PyErr_SetString if PyObject_New fails.
5919 * python/py-frame.c (frame_info_to_frame_object): Don't call
5920 PyErr_SetString if PyObject_New fails.
5922 2013-05-17 Pavel Chupin <pavel.v.chupin@intel.com>
5924 * acinclude.m4: Add check for dlopen in libdl.
5925 * configure.ac: Ditto.
5926 * configure: Regenerate.
5928 2013-05-17 Phil Muldoon <pmuldoon@redhat.com>
5930 * frame.c (frame_stash): Convert to htab.
5931 (frame_addr_hash): New function.
5932 (frame_addr_hash_eq): New function.
5933 (frame_stash_create): Convert function to create
5935 (frame_stash_add): Convert function to add an entry to a hash
5937 (frame_stash_find): Convert function to search the hash table.
5938 (frame_stash_invalidate): Convert function to empty the hash
5940 (get_frame_id): Only add to stash if a frame_id is created.
5941 (_initialize_frame): Call frame_stash_create.
5943 2013-05-16 Yue Lu <hacklu.newborn@gmail.com> (tiny change)
5945 * configure.ac: Ensure MIG is available when building for GNU Hurd
5947 * configure: Regenerate.
5949 2013-05-16 Joel Brobecker <brobecker@adacore.com>
5951 * dwarf2read.c (set_cu_language): Add DW_LANG_UPC handling.
5953 2013-05-16 Joel Brobecker <brobecker@adacore.com>
5955 * ada-lang.c (ada_make_symbol_completion_list): Make sure
5956 all cleanups are done before returning from this function.
5958 2013-05-15 Joel Brobecker <brobecker@adacore.com>
5960 * utils.h: #include "exceptions.h".
5961 (enum errors): Remove partial declaration.
5963 2013-05-15 Joel Brobecker <brobecker@adacore.com>
5965 * gdbarch.sh (core_xfer_shared_libraries_aix): New method.
5966 * gdbarch.h, gdbarch.c: Regenerate.
5967 * corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX
5970 * rs6000-aix-tdep.h: New file.
5971 * Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h.
5972 * rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and
5974 (struct field_info, struct ld_info_desc): New types.
5975 (ld_info32_desc, ld_info64_desc): New static constants.
5976 (struct ld_info): New type.
5977 (rs6000_aix_extract_ld_info): New function.
5978 (rs6000_aix_shared_library_to_xml): Likewise.
5979 (rs6000_aix_ld_info_to_xml): Likewise.
5980 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
5981 (rs6000_aix_init_osabi): Add call to
5982 set_gdbarch_core_xfer_shared_libraries_aix.
5983 * rs6000-nat.c: Add "rs6000-aix-tdep.h" include.
5984 Remove "xml-utils.h" include.
5985 (LdInfo): Delete typedef.
5986 (ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME):
5988 (rs6000_ptrace_ldinfo): Change return type to gdb_byte *.
5989 Adjust code accordingly.
5990 (rs6000_core_ldinfo): Delete, folded into
5991 rs6000_aix_core_xfer_shared_libraries_aix.
5992 (rs6000_xfer_shared_library): Delete.
5993 (rs6000_xfer_shared_libraries): Reimplement.
5995 2013-05-15 Markus Metzger <markus.t.metzger@intel.com>
5997 * record.c (record_goto_cmdlist): New.
5998 (cmd_record_goto): Split into this ...
5999 (cmd_record_goto_begin): ... this
6000 (cmd_record_goto_end): ... and this.
6001 (_initialize_record): Change "record goto" to prefix command.
6002 Add commands for "record goto begin" and "record goto end".
6003 Add an alias for "record goto start" to "record goto begin".
6005 2013-05-14 Jan Kratochvil <jan.kratochvil@redhat.com>
6007 * linespec.c (convert_linespec_to_sals): New comment for
6008 SOURCE_FILENAME assignment.
6010 2013-05-14 Jan Kratochvil <jan.kratochvil@redhat.com>
6012 * cleanups.c (restore_my_cleanups): Replace gdb_assert by
6015 2013-05-14 Tom Tromey <tromey@redhat.com>
6017 * eval.c (parse_and_eval_long): Make 'exp' const.
6018 * value.h (parse_and_eval_long): Update.
6020 2013-05-14 Tom Tromey <tromey@redhat.com>
6022 * ui-file.c (gdb_fopen): Make arguments const.
6023 * ui-file.h (gdb_fopen): Make arguments const.
6025 2013-05-14 Tom Tromey <tromey@redhat.com>
6027 * remote.c (remote_set_trace_notes): Make arguments const.
6028 * target.c (update_current_target): Update cast.
6029 * target.h (to_set_trace_notes): Make arguments const.
6031 2013-05-14 Tom Tromey <tromey@redhat.com>
6033 * go32-nat.c (go32_terminal_info): Make 'args' const.
6034 * inferior.h (child_terminal_info): Update.
6035 * inflow.c (child_terminal_info): Make 'args' const.
6036 * target.c (default_terminal_info): Make 'args' const.
6037 (debug_to_terminal_save_ours): Likewise.
6038 * target.h (struct target_ops) <to_terminal_info>: Make argument
6041 2013-05-13 Tom Tromey <tromey@redhat.com>
6043 * gcore.c (create_gcore_bfd): Make 'filename' const.
6044 * gcore.h (create_gcore_bfd): Make 'filename' const.
6045 * record-full.c (record_full_save): Make 'recfilename' const.
6046 * target.c (target_save_record): Make 'filename' const.
6047 * target.h (struct target_ops) <to_save_record>: Make 'filename'
6049 (target_save_record): Likewise.
6051 2013-05-13 Tom Tromey <tromey@redhat.com>
6054 * dwarf2read.c (dwarf2_record_block_ranges): Ensure that the
6055 ranges section has been read.
6057 2013-05-13 Tom Tromey <tromey@redhat.com>
6060 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
6061 STRUCTOP_PTR>: Return a not_lval value for
6062 EVAL_AVOID_SIDE_EFFECTS.
6063 * opencl-lang.c (evaluate_subexp_opencl): Return a not_lval value
6064 for EVAL_AVOID_SIDE_EFFECTS.
6066 2013-05-13 Joel Brobecker <brobecker@adacore.com>
6068 * rs6000-aix-tdep.c (rs6000_push_dummy_call): Convert
6069 floating point registers to register type before storing
6071 * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call):
6074 2013-05-10 Joel Brobecker <brobecker@adacore.com>
6075 Tom Tromey <tromey@redhat.com>
6077 * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
6079 * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
6081 * darwin-nat.c (darwin_pre_ptrace): Use mark_fd_no_cloexec.
6082 (darwin_ptrace_him): Use unmark_fd_no_cloexec.
6083 * inf-ttrace.c (do_cleanup_pfds): Use unmark_fd_no_cloexec.
6084 (inf_ttrace_prepare): Use mark_fd_no_cloexec.
6086 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
6087 Tom Tromey <tromey@redhat.com>
6090 * configure: Rebuild.
6091 * configure.ac (build_warnings): Do not use -Wformat-nonliteral
6094 2013-05-10 Pedro Alves <palves@redhat.com>
6096 * remote.c (_initialize_remote): Fix spelling of
6097 qXfer:traceframe-info:read packet in packet config command.
6099 2013-05-10 David Taylor <dtaylor@emc.com>
6103 * remote.c (remote_trace_set_readonly_regions): Do not overwrite
6104 "QTro" at start of packet.
6106 2013-05-10 Joel Brobecker <brobecker@adacore.com>
6108 * solib-aix.c (solib_aix_relocate_section_addresses):
6109 For the .bss section action, apply the same offset as
6112 2013-05-10 Joel Brobecker <brobecker@adacore.com>
6114 * solib-aix.c (solib_aix_relocate_section_addresses):
6115 Remove FIXME comment.
6117 2013-05-10 Joel Brobecker <brobecker@adacore.com>
6120 * sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
6121 New functions, directly copied from sparc-sol-thread.c.
6122 * sparc-sol-thread.c: Delete.
6123 * configure.ac: Remove code handling sparc-solaris-thread.c.
6124 * configure: Regenerate.
6126 2013-05-10 Phil Muldoon <pmuldoon@redhat.com>
6128 * stack.c (backtrace_command_1): Add "no-filters", and Python frame
6130 (backtrace_command): Add "no-filters" option parsing.
6131 (_initialize_stack): Alter help to reflect "no-filters" option.
6132 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-framefilter.o
6133 (SUBDIR_PYTHON_SRCS): Add py-framefilter.c
6134 (py-frame.o): Add target
6135 * data-directory/Makefile.in (PYTHON_DIR): Add Python frame
6137 * python/python.h: Add new frame filter constants, and flag enum.
6138 (apply_frame_filter): Add definition.
6139 * python/python.c (apply_frame_filter): New non-Python
6141 * python/py-utils.c (py_xdecref): New function.
6142 (make_cleanup_py_xdecref): Ditto.
6143 * python/py-objfile.c: Declare frame_filters dictionary.
6144 (objfpy_dealloc): Add frame_filters dealloc.
6145 (objfpy_new): Initialize frame_filters attribute.
6146 (objfile_to_objfile_object): Ditto.
6147 (objfpy_get_frame_filters): New function.
6148 (objfpy_set_frame_filters): New function.
6149 * python/py-progspace.c: Declare frame_filters dictionary.
6150 (pspy_dealloc): Add frame_filters dealloc.
6151 (pspy_new): Initialize frame_filters attribute.
6152 (pspacee_to_pspace_object): Ditto.
6153 (pspy_get_frame_filters): New function.
6154 (pspy_set_frame_filters): New function.
6155 * python/py-framefilter.c: New file.
6156 * python/lib/gdb/command/frame_filters.py: New file.
6157 * python/lib/gdb/frames.py: New file.
6158 * python/lib/gdb/__init__.py: Initialize global frame_filters
6160 * python/lib/gdb/FrameDecorator.py: New file.
6161 * python/lib/gdb/FrameIterator.py: New file.
6162 * mi/mi-cmds.c (mi_cmds): Add frame filters command.
6163 * mi/mi-cmds.h: Declare.
6164 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Add
6165 --no-frame-filter logic, and Python frame filter logic.
6166 (stack_enable_frame_filters): New function.
6167 (parse_no_frame_option): Ditto.
6168 (mi_cmd_stack_list_frames): Add --no-frame-filter and Python frame
6170 (mi_cmd_stack_list_locals): Ditto.
6171 (mi_cmd_stack_list_args): Ditto.
6172 (mi_cmd_stack_list_variables): Ditto.
6173 * NEWS: Add frame filter note.
6175 2013-05-09 Doug Evans <dje@google.com>
6177 * symfile.c (syms_from_objfile_1): Delete args offsets, num_offsets.
6178 All callers updated.
6179 (syms_from_objfile): Ditto. Make static.
6180 (symbol_file_add_with_addrs): Renamed from
6181 symbol_file_add_with_addrs_or_offsets. Delete args offsets,
6182 num_offsets. All callers updated.
6183 * symfile.h (syms_from_objfile): Delete.
6185 * symfile.c (decrement_reading_symtab): Add assert.
6186 (increment_reading_symtab): Ditto.
6188 2013-05-09 Joel Brobecker <brobecker@adacore.com>
6190 * source.c (forward_search_command): Replace call to getc
6192 (reverse_search_command): Likewise.
6194 2013-05-08 Doug Evans <dje@google.com>
6196 * psymtab.c (expand_symtabs_matching_via_partial): Fix file name
6199 2013-05-08 Joel Brobecker <brobecker@adacore.com>
6201 * sol-thread.c (info_cb): Factorize the code a little.
6203 2013-05-08 Joel Brobecker <brobecker@adacore.com>
6205 * sol-thread.c (info_cb): Rework the output of the "maintenance
6206 info sol-threads" command a bit.
6208 2013-05-08 Joel Brobecker <brobecker@adacore.com>
6210 * sol-thread.c (info_cb) [ti.ti_state == TD_THR_SLEEP]:
6211 Replace ti.ti_startfunc by ti.ti_pc.
6213 2013-05-08 Joel Brobecker <brobecker@adacore.com>
6215 * solib-aix.c (solib_aix_free_library_list): New function
6216 for the case where HAVE_LIBEXPAT is not defined.
6218 2013-05-07 Sergio Durigan Junior <sergiodj@redhat.com>
6220 PR breakpoints/15413:
6221 * breakpoint.c (condition_completer): Simplify the code to
6222 disconsider multiple locations of breakpoints when completing the
6223 "condition" command.
6225 2013-05-07 Pierre Muller <muller@sourceware.org>
6227 * common/linux-btrace.c: ARI fix: Include "gdb_wait.h"
6228 instead of <sys/wait.h>.
6230 2013-05-07 Pierre Muller <muller@sourceware.org>
6232 * nios2-tdep.c (nios2_dwarf_reg_to_regnum): ARI fix: remove
6233 trailing new line from warning message.
6235 2013-05-07 Pierre Muller <muller@sourceware.org>
6237 * contrib/ari/gdb_ari.sh (SOLIB_ADD, SOLIB_CREATE_INFERIOR_HOOK)
6238 (PC_SOLIB): Change type from ari_deprecate to ari_regression.
6240 2013-05-07 Joel Brobecker <brobecker@adacore.com>
6242 * rs6000-nat.c (rs6000_core_ldinfo): Remove '\n' at end of
6243 error message (ARI fix).
6245 2013-05-07 Joel Brobecker <brobecker@adacore.com>
6247 * features/library-list-aix.dtd: Replace library-list by
6249 * rs6000-nat.c: Replace library-list by library-list-aix
6251 * solib-aix.c: Likewise.
6253 2013-05-07 Joel Brobecker <brobecker@adacore.com>
6255 * target.h (enum target_object) [TARGET_OBJECT_LIBRARIES_AIX]:
6256 Renames TARGET_OBJECT_AIX_LIBRARIES.
6257 * rs6000-nat.c: Replace TARGET_OBJECT_AIX_LIBRARIES with
6258 TARGET_OBJECT_LIBRARIES_AIX throughout.
6259 * solib-aix.c: Likwise.
6261 2013-05-07 Yao Qi <yao@codesourcery.com>
6263 * solib-dsbt.c (struct dsbt_info) <enable_break2_done>: Remove.
6264 (get_dsbt_info, enable_break, dsbt_clear_solib): Update.
6266 2013-05-07 Yao Qi <yao@codesourcery.com>
6268 * solib-dsbt.c (enable_break): Declare.
6269 (dsbt_current_sos): Remove call to enable_break2.
6270 (enable_break2): Rename to enable_break. Set solib breakpoint
6271 on '_dl_debug_state'.
6272 (enable_break): Remove.
6274 2013-05-07 Luis Machado <lgustavo@codesourcery.com>
6276 * ppc-linux-nat.c (ppc_linux_new_thread): Clear the new thread's
6277 debug state prior to replicating existing hardware watchpoints or
6280 2013-05-07 Jan Kratochvil <jan.kratochvil@redhat.com>
6282 * gcore.c (gcore_create_callback): Ignore sections with
6283 separate_debug_objfile_backlink != NULL.
6285 2013-05-06 Sandra Loosemore <sandra@codesourcery.com>
6286 Andrew Jenner <andrew@codesourcery.com>
6287 Chung-Lin Tang <cltang@codesourcery.com>
6288 Julian Brown <julian@codesourcery.com>
6290 Based on the nios2-elf port from Altera Corporation.
6292 * Makefile.in (ALL_TARGET_OBS): Add nios2-tdep.o and
6294 (HFILES_NO_SRCDIR): Add nios2-tdep.h.
6295 (ALLDEPFILES): Add nios2-tdep.c and nios2-linux-tdep.c.
6296 * configure.tgt: Add nios2*-*-linux* and nios2*-*-* targets.
6297 * nios2-tdep.h: New.
6298 * nios2-tdep.c: New.
6299 * nios2-linux-tdep.c: New.
6300 * features/Makefile (WHICH): Add nios2-linux.
6301 (nios2-linux-expedite): Set.
6302 * features/nios2-cpu.xml: New.
6303 * features/nios2.xml: New.
6304 * features/nios2-linux.xml: New.
6305 * features/nios2.c: New (autogenerated).
6306 * features/nios2-linux.c: New (autogenerated).
6307 * regformats/nios2-linux.dat: New (autogenerated).
6308 * NEWS (Changes since GDB 7.6): Add new Nios II targets
6311 2013-05-06 Doug Evans <dje@google.com>
6313 * symfile.c: Whitespace cleanup.
6315 * solist.h (struct target_so_ops): New member clear_so.
6316 * solib-svr4.c (svr4_clear_so): New function.
6317 (_initialize_svr4_solib): Set svr4_so_ops.clear_so.
6318 * solib.c (clear_so): Renamed from free_so_symbols.
6319 All callers updated. Call target clear_so if it exists.
6321 2013-05-06 Tom Tromey <tromey@redhat.com>
6323 * ada-lang.c (ada_value_primitive_packed_val): Don't
6325 * value.c (set_value_parent): Incref the new parent and decref
6327 (value_copy, value_primitive_field): Use set_value_parent.
6329 2013-05-06 Tom Tromey <tromey@redhat.com>
6331 * dwarf2loc.c (invalid_synthetic_pointer): Move earlier.
6332 (indirect_pieced_value): Call dwarf2_fetch_constant_bytes
6334 * dwarf2loc.h (dwarf2_fetch_constant_bytes): Declare.
6335 * dwarf2read.c (write_constant_as_bytes)
6336 (dwarf2_fetch_constant_bytes): New functions.
6338 2013-05-06 Tom Tromey <tromey@redhat.com>
6340 * dwarf2read.c (dwarf2_const_value_data): Remove unused
6342 (dwarf2_const_value_attr): Update.
6344 2013-05-06 Tom Tromey <tromey@redhat.com>
6346 * somread.c (som_symfile_offsets): Add 'const' to addrs.
6347 * machoread.c (macho_symfile_offsets): Add 'const' to addrs.
6348 * xcoffread.c (xcoff_symfile_offsets): Add 'const' to addrs.
6351 2013-05-06 Tom Tromey <tromey@redhat.com>
6353 * dwarf2read.c (dwarf2_const_value_attr): Use 'obstack', not
6356 2013-05-06 Doug Evans <dje@google.com>
6358 * dbxread.c (process_one_symbol): Constify section_offsets parameter.
6359 * stabsread.h (process_one_symbol): Update declaration.
6360 * dwarf2read.c (dw2_relocate): Constify new_offsets, delta parameters.
6361 * elfread.c (elf_symfile_relocate_probe): Ditto.
6362 * psymtab.c (relocate_psymtabs): Ditto.
6363 * objfiles.c (objfile_relocate1): Constify new_offsets parameter.
6364 (objfile_relocate): Ditto.
6365 * objfiles.h (objfile_relocate): Update declaration.
6366 * symfile.c (relative_addr_info_to_section_offsets): Constify
6368 (default_symfile_offsets): Ditto.
6369 (syms_from_objfile_1): Constify offsets parameter.
6370 (syms_from_objfile): Ditto.
6371 (symbol_file_add_with_addrs_or_offsets): Ditto.
6372 (symfile_map_offsets_to_segments): Constify data parameter.
6373 * symfile.h (struct quick_symbol_functions): Constify new_offsets,
6374 delta parameters of member relocate.
6375 (struct sym_probe_fns): Constify new_offsets,
6376 delta parameters of member sym_relocate_probe.
6377 (struct sym_fns): Constify section_addr_info parameter of member
6379 (relative_addr_info_to_section_offsets): Update declaration.
6380 (default_symfile_offsets): Ditto.
6381 (syms_from_objfile): Ditto.
6382 (symfile_map_offsets_to_segments): Ditto.
6384 * symfile.c (syms_from_objfile_1): Use correct section count when
6385 objfile->sf == NULL.
6387 2013-05-06 Mike Frysinger <vapier@gentoo.org>
6389 * common/linux-btrace.c (intel_supports_btrace): Fix indentation.
6391 2013-05-06 Doug Evans <dje@google.com>
6393 * psympriv.h (struct partial_symtab): Augment comment for member
6396 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6398 Reimplement shared library support on ppc-aix...
6399 * target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
6400 * features/library-list-aix.dtd: New file.
6401 * solib-aix.h, solib-aix.c: New file.
6402 * rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
6403 (rs6000_find_toc_address_hook): Delete.
6404 (rs6000_push_dummy_call): Rewrite code setting the TOC value.
6405 (rs6000_aix_init_osabi): Register solib_aix_so_ops.
6406 * rs6000-nat.c: Remove "xcoffsolib.h" include. Include
6408 (map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
6409 (vmap_symtab, fixup_breakpoints): Delete.
6410 (rs6000_xfer_shared_libraries): New function.
6411 (rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
6412 (vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
6413 (xcoff_relocate_symtab, xcoff_relocate_core): Delete.
6414 (rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
6415 (rs6000_xfer_shared_library): New function.
6416 (find_toc_address): Delete.
6417 (_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
6418 * rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
6419 * xcoffread.c (record_minimal_symbol): Reloate symbol address
6420 before creating minimal symbol. Adjust function description
6422 (scan_xcoff_symtab): Replace call to
6423 prim_record_minimal_symbol_and_info by call to
6424 record_minimal_symbol.
6425 (xcoff_symfile_offsets): Reimplement mostly as a wrapper
6426 around default_symfile_offsets.
6427 * configure.tgt: Add solib-aix.o to gdb_target_obs for
6428 powerpc-aix targets.
6429 * config/rs6000/nm-rs6000.h: Delete.
6430 * config/powerpc/aix.mh (NAT_FILE): Delete.
6431 (NATDEPFILES): Remove xcoffsolib.o.
6432 * Makefile.in (XMLFILES): Add library-list-aix.dtd.
6433 (ALL_TARGET_OBS): Add solib-aix.o.
6434 (HFILES_NO_SRCDIR): Remove xcoffsolib.h and
6435 config/rs6000/nm-rs6000.h. Add solib-aix.h.
6436 (ALLDEPFILES): Add solib-aix.c. Remove xcoffsolib.c.
6437 * xcoffsolib.h, xcoffsolib.c: Delete.
6439 * solib.c (reload_shared_libraries): Remove reference to
6440 SOLIB_CREATE_INFERIOR_HOOK.
6441 * breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
6442 (disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
6443 (momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
6445 * corelow.c (deprecated_core_resize_section_table): Delete.
6446 * exec.c: Remove include of xcoffsolib.h".
6447 (map_vmap, vmap): Delete.
6448 (exec_close_1): Remove references to vmap.
6449 (exec_file_attach): Remove vmap handling code, and reference
6450 to DEPRECATED_IBM6000_TARGET.
6451 (bfdsec_to_vmap): Delete.
6452 (exec_files_info): Remove block of code handling VMAP.
6453 * infcmd.c (post_create_inferior): Remove reference to
6454 SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
6455 * infrun.c (follow_exec): Remove reference to
6456 SOLIB_CREATE_INFERIOR_HOOK.
6457 * stack.c (print_frame): Remove reference to PC_SOLIB.
6458 * solib-dsbt.c (dsbt_current_sos): Adjust comment.
6459 (dsbt_relocate_main_executable): Likewise.
6460 * solib-frv.c (frv_current_sos): Likewise.
6462 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6464 * sol-thread.c (rw_common): Cast BUF to "gdb_byte *" in calls
6465 to target_write_memory and target_read_memory.
6467 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6469 * darwin-nat.c (darwin_setup_fake_stop_event): New function.
6470 (darwin_attach): Adjust using darwin_setup_fake_stop_event.
6472 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6474 * darwin-nat.c: Replace all "%x" instances in format strings
6475 into "0x%x" throughout.
6477 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6479 * darwin-nat.c (darwin_mourn_inferior): Replace call to
6480 gdb_assert by call to MACH_CHECK_ERROR.
6481 (darwin_attach_pid): Raise an error rather than a failed
6482 assertion when various system calls failed. Report a warning
6483 instead of raising a failed assertion when PREV_NOT is not NULL
6484 after call to mach_port_request_notification.
6485 (darwin_ptrace_me): Raise an error rather than a failed
6486 assertion when read returns nonzero.
6488 2013-05-06 Joel Brobecker <brobecker@adacore.com>
6490 * amd64-darwin-tdep.c: Remove #include "gdb_assert.h".
6492 2013-05-05 Jan Kratochvil <jan.kratochvil@redhat.com>
6494 * cleanups.c (restore_my_cleanups): New gdb_assert for SENTINEL_CLEANUP.
6496 2013-05-05 Jan Kratochvil <jan.kratochvil@redhat.com>
6498 * event-top.c (display_gdb_prompt): Call missing do_cleanups.
6499 * infcmd.c (get_return_value) <!stop_regs>: Do not overwrite CLEANUP.
6500 * symfile.c (symfile_bfd_open): New variable back_to. Do not leave
6501 a stale cleanup. Fix double free of NAME.
6503 2013-05-04 Eli Zaretskii <eliz@gnu.org>
6505 * windows-nat.c (windows_delete_thread): Accept an additional
6506 argument, the thread's exit code, and announce thread death when
6507 print_thread_events is non-zero and we are deleting a thread that
6508 is not the main thread.
6509 (get_windows_debug_event): Pass thread exit code to
6510 windows_delete_thread.
6512 2013-05-03 Kevin Buettner <kevinb@redhat.com>
6514 * v850-tdep.c (elf-bfd.h, elf/v850.h): Include.
6515 (R_149_REGNUM, E_NUM_OF_V850E2_REGS, E_SELID_1_R0_REGNUM)
6516 (E_SELID_1_R31_REGNUM, E_SELID_2_R0_REGNUM, E_SELID_2_R31_REGNUM)
6517 (E_SELID_3_R0_REGNUM, E_SELID_3_R31_REGNUM, E_SELID_4_R0_REGNUM)
6518 (E_SELID_4_R31_REGNUM, E_SELID_5_R0_REGNUM, E_SELID_5_R31_REGNUM)
6519 (E_SELID_6_R0_REGNUM, E_SELID_6_R31_REGNUM, E_SELID_7_R0_REGNUM, E_SELID_7_R31_REGNUM)
6520 (E_VR0_REGNUM, E_VR31_REGNUM, E_NUM_OF_V850E3V5_REGS): Define.
6521 (v850_abi, V850_ABI_GCC, V850_ABI_RH850): New enum and constants.
6522 (gdbarch_tdep): New struct.
6523 (v850e2_register_name): Use E_NUM_OF_V850E2_REGS instead of
6525 (v850e3v5_register_name): New function.
6526 (v850_register_type): v850e3v5 vector registers are 64-bits wide.
6527 (v850_use_struct_convention): Add `gdbarch' parameter. Add new
6528 code handling the struct return conventions for the RH850 ABI.
6530 (v850_eight_byte_align_p): New function.
6531 (v850_push_call_dummy): Push structs by value, not by reference
6532 for the RH850 ABI. Add support for eight byte alignment.
6533 (v850_dbtrap_breakpoint_from_pc): New function.
6534 (v850_gdbarch_init): Add ABI detection code. Register
6535 v850e3v5_register_name for the v850e3v5 architecture. Set the
6536 number of registers for v850e3v5. Register
6537 v850_dbtrap_breakpoint_from_pc as appropriate.
6538 (_initialize_gdbarch_init): Registration bfd_arch_v850_rh850.
6540 2013-05-03 Doug Evans <dje@google.com>
6542 * objfiles.c (objfile_relocate): Use gdb_bfd_count_sections instead
6543 of bfd_count_sections.
6544 * solib-target.c (solib_target_relocate_section_addresses): Ditto.
6545 * symfile.c (default_symfile_offsets): Ditto.
6546 (syms_from_objfile_1): Ditto. Make dummy addrs list an array of
6547 one entry, not bfd_count_sections entries.
6549 2013-05-03 Kevin Buettner <kevinb@redhat.com>
6551 * rl78-tdep.c (rl78_register_reggroup_p): Include SP in the
6552 `save' and `restore' register groups. Don't include SPL
6553 or SPH in these groups.
6554 (rl78_dwarf_reg_to_regnum): Adjust mapping for
6555 RL78_PC_REGNUM. Add mappings for RL78_PSW_REGNUM,
6556 RL78_ES_REGNUM, and RL78_CS_REGNUM.
6557 (rl78_gdbarch_init): Set `dwarf2_addr_size' to 4. Invoke
6558 dwarf2_append_unwinders().
6560 2013-05-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
6562 * break-catch-sig.c (signal_catchpoint_breakpoint_hit): Do not
6563 ignore SIGINT and SIGTRAP in case these internal signals are
6566 2013-05-01 Joel Brobecker <brobecker@adacore.com>
6568 * darwin-nat.c (darwin_read_write_inferior): Change types
6569 of parameters rdaddr and wraddr to "gdb_byte *". Change type
6570 of copy_count to "mach_msg_type_number_t".
6571 (darwin_read_dyld_info): Change type of parameter
6572 rdaddr to "gdb_byte *".
6574 2013-05-01 Joel Brobecker <brobecker@adacore.com>
6576 * solib-ia64-hpux.c (ia64_hpux_read_dynamic_info): Change cast
6577 of &info->load_map from "char *" to "gdb_byte *".
6579 2013-05-01 Joel Brobecker <brobecker@adacore.com>
6581 * ia64-tdep.c (ia64_access_fpreg): Change cast of val
6582 from "char *" to "gdb_byte *".
6583 (ia64_access_rse_fpreg, ia64_access_mem): Likewise.
6585 2013-04-30 Doug Evans <dje@google.com>
6587 * dwarf2read.c (lookup_dwo_unit): Return NULL if DWO not found.
6588 (init_cutu_and_read_dies): Flag a complaint, not error, for bad
6589 DWO stub. If DWO isn't found, just use stub.
6590 (lookup_dwo_cutu): Don't try DWO if there's a DWP file.
6592 * dwarf2read.c (dw2_find_symbol_file): Initialize filename before
6593 calling init_cutu_and_read_dies.
6595 2013-03-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
6597 * target-descriptions.c (maint_print_c_tdesc_cmd):
6598 Add case to parse structures as register types and
6601 2013-04-30 Walfred Tedeschi <walfred.tedeschi@intel.com>
6603 * MAINTAINERS (Write After Approval): Add myself to the list.
6605 2013-04-30 Joel Brobecker <brobecker@adacore.com>
6607 * sol-thread.c (rw_common): Change type of parameter "buf"
6609 (ps_pdwrite, ps_ptwrite): Cast parameter "buf" in call to
6610 rw_common to "gdb_byte *" instead of "char *".
6612 2013-04-30 Joel Brobecker <brobecker@adacore.com>
6614 * sol-thread.c (info_cb) [ti.ti_startfunc != 0]: Change type
6615 of local variable msym to const struct bound_minimal_symbol.
6616 Adjust use accordingly.
6617 [ti.ti_state == TD_THR_SLEEP]: Likewise.
6619 2013-04-30 Samuel Thibault <samuel.thibault@gnu.org>
6621 * i386gnu-nat.c (CREG_OFFSET): New macro.
6622 (creg_offset): New array.
6623 (CREG_ADDR): Use creg_offset instead of reg_offset.
6625 2013-04-30 Joel Brobecker <brobecker@adacore.com>
6627 * mep-tdep.c (mep_write_pc): Delete.
6628 (mep_gdbarch_init): Remove call to set_gdbarch_write_pc.
6629 Add call to set_gdbarch_pc_regnum.
6631 2013-04-30 Joel Brobecker <brobecker@adacore.com>
6633 * common/filestuff.c: Replace #include <dirent.h> by
6634 #include "gdb_dirent.h".
6636 2013-04-30 Joel Brobecker <brobecker@adacore.com>
6638 * common/filestuff.c: Replace #include <sys/stat.h> by
6639 #include "gdb_stat.h".
6641 2013-04-29 Pierre Muller <muller@sourceware.org>
6643 * dwarf2read.c (handle_DW_AT_stmt_list): Avoid ARI warning for
6644 editCase function rule.
6645 (get_DW_AT_signature_type): Likewise.
6647 2013-04-29 Joel Brobecker <brobecker@adacore.com>
6649 * m32r-tdep.c (m32r_write_pc): Delete.
6650 (m32r_gdbarch_init): Remove call to set_gdbarch_write_pc.
6651 Add call to set_gdbarch_pc_regnum.
6653 2013-04-29 Pierre Muller <muller@sourceware.org>
6655 * ./contrib/ari/gdb_ari.sh (editCase rule): Fix spelling error.
6657 2013-04-29 Joel Brobecker <brobecker@adacore.com>
6659 * dwarf2read.c (get_DW_AT_signature_type): Add ARI marker.
6661 2013-04-28 Yao Qi <yao@codesourcery.com>
6663 * solib-dsbt.c (fetch_loadmap): Re-indent.
6664 (displacement_from_map, enable_break2): Likewise.
6665 (dsbt_relocate_section_addresses): Likewise.
6667 2013-04-26 Joel Brobecker <brobecker@adacore.com>
6671 2013-04-25 Andreas Kaufmann <Andreas.Kaufmann@synopsys.com>
6674 * dwarf2read.c (process_full_comp_unit): Always create a static
6677 2013-04-25 Hui Zhu <hui@codesourcery.com>
6679 * breakpoint.c (build_target_command_list): Change loc->cond_bytecode
6680 to loc->cmd_bytecode.
6682 2013-04-24 Doug Evans <dje@google.com>
6684 * dwarf2read.c (setup_type_unit_groups): Fix comment.
6686 2013-04-22 Keith Seitz <keiths@redhat.com>
6688 * tracepoint.c (trace_save): Call the writer's start method.
6690 2013-04-24 Muhammad Bilal <mbilal@codesourcery.com>
6693 * cli/cli-decode.c (lookup_command): Show an error if there is no space
6696 2013-04-23 Tom Tromey <tromey@redhat.com>
6698 * common/filestuff.c: Check USE_WIN32API before including
6700 (HAVE_F_GETFD): New define.
6701 (mark_cloexec): Check HAVE_F_GETFD.
6702 (gdb_open_cloexec): Change 'mode' to unsigned long.
6703 (gdb_socketpair_cloexec): Check HAVE_SOCKETPAIR.
6704 (gdb_pipe_cloexec): Check HAVE_PIPE.
6705 * common/filestuff.h (gdb_open_cloexec): Change 'mode' to unsigned
6708 2013-04-23 Hui Zhu <hui@codesourcery.com>
6711 * breakpoint.c (bpstat_what): Add BPSTAT_WHAT_SINGLE to bp_dprintf.
6713 2013-04-23 Hui Zhu <hui@codesourcery.com>
6716 * breakpoint.c (dprintf_print_recreate): New.
6717 (save_breakpoints): Let it not save dprintf commands.
6718 (initialize_breakpoint_ops): Set dprintf_print_recreate.
6720 2013-04-22 Tom Tromey <tromey@redhat.com>
6723 * Makefile.in (SFILES): Add filestuff.c
6724 (COMMON_OBS): Add filestuff.o.
6725 (filestuff.o): New target.
6726 * auto-load.c (auto_load_objfile_script_1): Use
6728 * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
6729 * cli/cli-cmds.c (shell_escape): Call close_most_fds.
6730 * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
6731 * common/agent.c (gdb_connect_sync_socket): Use
6733 * common/filestuff.c: New file.
6734 * common/filestuff.h: New file.
6735 * common/linux-osdata.c (linux_common_core_of_thread)
6736 (command_from_pid, commandline_from_pid, print_source_lines)
6737 (linux_xfer_osdata_shm, linux_xfer_osdata_sem)
6738 (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
6740 * common/linux-procfs.c (linux_proc_get_int)
6741 (linux_proc_pid_has_state): Use gdb_fopen_cloexec.
6742 * config.in, configure: Rebuild.
6743 * configure.ac: Don't check for sys/socket.h. Check for
6745 * corelow.c (core_open): Use gdb_open_cloexec.
6746 * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
6747 * fork-child.c (fork_inferior): Call close_most_fds.
6748 * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
6749 * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
6750 * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
6751 Use gdb_fopen_cloexec.
6752 (linux_proc_xfer_partial, linux_proc_xfer_spu): Use
6754 (linux_async_pipe): Use gdb_pipe_cloexec.
6755 * remote-fileio.c (remote_fileio_func_open): Use
6757 * remote.c (remote_file_put, remote_file_get): Use
6759 * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
6761 * ser-tcp.c (net_open): Use gdb_socket_cloexec.
6762 * ser-unix.c (hardwire_open): Use gdb_open_cloexec.
6763 * solib.c (solib_find): Use gdb_open_cloexec.
6764 * source.c (openp, find_and_open_source): Use gdb_open_cloexec.
6765 * tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
6766 (tfile_open): Use gdb_open_cloexec.
6767 * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
6768 * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
6769 * xml-support.c (xml_fetch_content_from_file): Use
6771 * main.c (captured_main): Call notice_open_fds.
6773 2013-04-22 Edjunior Machado <emachado@linux.vnet.ibm.com>
6775 * remote-sim.c (dump_mem): Change the type of 'buf' parameter from
6776 'char *' to 'gdb_byte *'.
6777 (gdbsim_store_register): Change the type of 'tmp' from 'char' to
6780 2013-04-22 Yao Qi <yao@codesourcery.com>
6782 * infrun.c: Fix typo in comment.
6784 2013-04-22 Andrew Haley <aph@redhat.com>
6786 * arm-tdep.c (BranchDest): Cast result as "unsigned long",
6789 2013-04-20 Yao Qi <yao@codesourcery.com>
6791 * ctf.c (ctf_fetch_registers): Change the type of 'regs' from
6792 'char *' to 'gdb_byte *'. Cast the return value of
6793 'bt_ctf_get_char_array' to 'gdb_byte *'.
6795 2013-04-19 Pedro Alves <palves@redhat.com>
6797 * configure.ac (build_warnings): Replace -Wno-pointer-sign with
6799 * configure: Regenerate.
6801 2013-04-19 Pedro Alves <palves@redhat.com>
6803 * ser-tcp.c (net_read_prim): Cast second argument to recv to
6806 2013-04-19 Pedro Alves <palves@redhat.com>
6808 * monitor.c (monitor_write_memory, monitor_write_memory_bytes):
6809 Change type of 'myaddr' parameter to gdb_byte pointer.
6810 (monitor_write_memory_longlongs): Likewise. Cast 'myaddr' pointer
6811 to 'long long' pointer instead of to 'unsigned long long'.
6812 (monitor_write_memory_block, monitor_read_memory_single)
6813 (monitor_read_memory): Change type of 'myaddr' parameter to
6816 2013-04-19 Pedro Alves <palves@redhat.com>
6818 * record.c (validate_history_size): Make parameter 'setting'
6821 2013-04-19 Pedro Alves <palves@redhat.com>
6823 * ctf.c (ctf_write_uploaded_tsv, ctf_write_uploaded_tp): Add casts
6826 2013-04-19 Pedro Alves <palves@redhat.com>
6828 * cp-valprint.c (cp_print_class_member): Change type of 'fieldno'
6831 2013-04-19 Pedro Alves <palves@redhat.com>
6833 * ada-lang.c (print_it_exception): Add cast to gdb_byte *.
6834 * ada-tasks.c (read_fat_string_value): Likewise.
6836 2013-04-19 Pedro Alves <palves@redhat.com>
6838 * dwarf2-frame.c (execute_cfa_program): Make 'bytes_read' local
6839 unsigned. Pass 'tmp' to safe_read_uleb128 instead of the signed
6840 'offset', and adjust.
6842 2013-04-19 Pedro Alves <palves@redhat.com>
6844 * dwarf2read.c (dwarf2_get_dwz_file): Add cast to const char *.
6845 (read_index_from_section): Add cast to 'char *'.
6847 2013-04-19 Pedro Alves <palves@redhat.com>
6849 * xcoffread.c (xcoff_initial_scan): Add cast to 'char *'.
6851 2013-04-19 Pedro Alves <palves@redhat.com>
6853 * coff-pe-read.c (read_pe_exported_syms): Handle strings as char.
6855 2013-04-19 Pedro Alves <palves@redhat.com>
6857 * record-full.c (record_full_get_bookmark): Change local 'ret'
6858 type to char * and add cast to gdb_byte *.
6859 (record_full_goto_bookmark): Handle 'bookmark' argument as a
6861 * reverse.c (goto_bookmark_command): Add casts to gdb_byte *.
6863 2013-04-19 Pedro Alves <palves@redhat.com>
6865 * python/py-inferior.c (infpy_write_memory): Add cast to gdb_byte
6866 * python/py-prettyprint.c (print_string_repr): Change type of
6867 'output' local to char *. Add cast to gdb_byte * in
6868 LA_PRINT_STRING call.
6869 (print_children): Change type of 'output' local to char *.
6870 * python/py-value.c (valpy_string): Add cast to const char * in
6871 PyUnicode_Decode call.
6873 2013-04-19 Pedro Alves <palves@redhat.com>
6875 * remote-mips.c (mips_cksum): Rename 'data' parameter to 'datastr'
6876 and change its type to 'const char *'. Adjust.
6877 (mips_send_packet): Add cast to 'char *', and remove cast to
6879 (mips_receive_packet): Remove cast to 'unsigned char *'.
6880 (mips_load_srec): Use bfd_byte.
6881 (pmon_makeb64, pmon_zeroset): Make 'chksum' parameter unsigned.
6882 (pmon_checkset): Make 'value' parameter unsigned.
6884 2013-04-19 Pedro Alves <palves@redhat.com>
6886 * common/agent.c (agent_run_command): Add cast to gdb_byte *.
6888 2013-04-19 Pedro Alves <palves@redhat.com>
6890 * remote.c (remote_write_bytes_aux, compare_sections_command)
6892 (remote_search_memory, remote_hostio_pwrite, remote_hostio_pread)
6893 (remote_hostio_readlink, remote_bfd_iovec_pread)
6894 (remote_set_trace_notes): Use gdb_byte when RSP buffer is used as
6895 binary buffer, and char when buffer is used as string.
6896 * tracepoint.c (encode_source_string, tfile_write_uploaded_tp)
6897 (trace_save, tfile_open, traceframe_walk_blocks)
6898 (tfile_fetch_registers): Likewise.
6900 2013-04-19 Pedro Alves <palves@redhat.com>
6902 * ser-base.c (ser_base_write): Change prototype -- take 'void *'
6903 buffer and size_t size. Adjust.
6904 * ser-base.h (ser_base_write): Adjust.
6905 * ser-go32.c (cnts): Change type to size_t.
6906 (dos_write): Change prototype -- take 'void *'
6907 buffer and size_t size. Adjust.
6908 (dos_info): Print elements of 'cnts' as unsigned long.
6909 * serial.c (serial_write): Likewise.
6910 * serial.h (serial_write): Adjust.
6911 (struct serial_ops) <write>: Change prototype -- take 'void *'
6912 buffer and size_t size. Adjust.
6914 2013-04-19 Pedro Alves <palves@redhat.com>
6916 * c-lang.c (evaluate_subexp_c): Cast result of obstack_base to
6918 * linux-tdep.c (linux_make_mappings_corefile_notes): Likewise.
6920 2013-04-19 Pedro Alves <palves@redhat.com>
6922 * alpha-tdep.c (alpha_extract_return_value): Use
6923 regcache_cooked_read_unsigned to read 'v0'.
6925 2013-04-19 Pedro Alves <palves@redhat.com>
6927 * xtensa-tdep.c (execute_l32e, execute_s32e): Change type of
6928 parameters 'at', 'as' and 'offset' to uint32_t.
6930 2013-04-19 Pedro Alves <palves@redhat.com>
6932 * aarch64-tdep.c (aarch64_analyze_prologue): Change type of local
6933 'is64' to signed 'int'.
6935 2013-04-19 Pedro Alves <palves@redhat.com>
6937 * s390-tdep.c (is_rs, is_rsy, is_rx, is_rxy): Change type of 'd2'
6940 2013-04-19 Pedro Alves <palves@redhat.com>
6942 * ppc-linux-tdep.c (ppc_skip_trampoline_code): Change local
6943 'insnbuf' buffer type to unsigned int[].
6945 2013-04-19 Pedro Alves <palves@redhat.com>
6947 * mips-tdep.c (mips_read_pc): Change local 'pc' type to LONGEST.
6949 2013-04-19 Pedro Alves <palves@redhat.com>
6951 * mep-tdep.c (mep_get_insn): Change 'insn' parameter type to
6954 2013-04-19 Pedro Alves <palves@redhat.com>
6956 * alpha-tdep.c (heuristic_fence_post): Change type to int.
6957 (alpha_heuristic_proc_start): Adjust to check -1 instead of
6959 * mips-tdep.c (heuristic_fence_post): Change type to int.
6960 (heuristic_proc_start): Adjust to check -1 instead of UINT_MAX.
6962 2013-04-19 Pedro Alves <palves@redhat.com>
6964 * cris-tdep.c (usr_cmd_cris_version): Make unsigned.
6965 (struct gdbarch_tdep) <cris_version>: Make unsigned.
6966 (cris_spec_reg_applicable, cris_gdbarch_init): Adjust locals.
6968 2013-04-19 Pedro Alves <palves@redhat.com>
6970 * avr-tdep.c (avr_io_reg_read_command): New local 'bufstr'. Use
6971 it to get a string view of the byte buffer.
6972 * i386-cygwin-tdep.c (core_process_module_section): Change local 'buf'
6973 type to gdb_byte *. Adjust.
6974 * linux-tdep.c (linux_info_proc, linux_find_memory_regions_full):
6975 Change local to char *.
6976 * solib-darwin.c (find_program_interpreter): Change return type to
6978 (darwin_solib_get_all_image_info_addr_at_init): Adjust.
6979 * solib-dsbt.c (enable_break2): Change local 'buf' to char *.
6980 * solib-frv.c (enable_break2): Change local 'buf' to char *.
6981 * solib-spu.c (spu_current_sos): Add gdb_byte * cast.
6982 * solib-svr4.c (find_program_interpreter): Change return type to
6984 (enable_break): Change local 'interp_name' to char *.
6985 * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
6986 * spu-tdep.c (spu_pseudo_register_read_spu): Add cast to 'char *'.
6987 (spu_pseudo_register_write_spu): Use char for string buffer.
6989 (info_spu_event_command, info_spu_signal_command): Add casts to
6992 2013-04-19 Pedro Alves <palves@redhat.com>
6994 * aarch64-tdep.c (aarch64_default_breakpoint): Change type to
6996 (aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
6997 * ada-lang.c (ada_value_assign): Use gdb_byte.
6998 * alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
6999 (alphanbsd_sigtramp_offset): Use gdb_byte.
7000 * arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
7001 (arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
7002 (eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
7003 (arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
7004 (arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
7005 * arm-tdep.c (arm_stub_unwind_sniffer)
7006 (arm_displaced_init_closure): Use gdb_byte.
7007 (arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
7008 (arm_default_thumb_le_breakpoint)
7009 (arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
7010 * arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
7011 thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
7012 * arm-wince-tdep.c (arm_wince_le_breakpoint)
7013 (arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
7014 * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
7015 (arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
7016 (arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
7017 * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
7018 (arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
7019 * cris-tdep.c (push_stack_item, cris_push_dummy_call)
7020 (cris_store_return_value, cris_extract_return_value): Use
7022 (constraint): Change type of parameter to char * from signed
7023 char*. Use gdb_byte.
7024 * dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
7025 of local buffer to gdb_byte *.
7026 * dwarf2read.c (read_index_from_section): Use gdb_byte.
7027 (create_dwp_hash_table): Change type of locals to gdb_byte *.
7028 (add_address_entry): Change type of local buffer to gdb_byte[].
7029 * frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
7030 (frv_push_dummy_call): Use gdb_byte.
7031 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
7032 (hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
7033 (hppa_hpux_supply_save_state): Use gdb_byte.
7034 * hppa-tdep.c (hppa32_push_dummy_call)
7035 (hppa64_convert_code_addr_to_fptr): Use gdb_byte.
7036 * ia64-tdep.c (extract_bit_field, replace_bit_field)
7037 (slotN_contents, replace_slotN_contents): Change type of parameter
7039 (fetch_instruction, ia64_pseudo_register_write)
7040 (ia64_register_to_value, ia64_value_to_register)
7041 (ia64_extract_return_value, ia64_store_return_value)
7042 (ia64_push_dummy_call): Use gdb_byte.
7043 * m32c-tdep.c (m32c_return_value): Remove cast.
7044 * m68hc11-tdep.c (m68hc11_pseudo_register_write)
7045 (m68hc11_push_dummy_call, m68hc11_store_return_value): Use
7047 * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
7048 * mn10300-tdep.c (mn10300_store_return_value)
7049 (mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
7051 * moxie-tdep.c (moxie_process_readu): Use gdb_byte.
7052 (moxie_process_record): Remove casts.
7053 * ppc-ravenscar-thread.c (supply_register_at_address)
7054 (ppc_ravenscar_generic_store_registers): Use gdb_byte.
7055 * ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
7056 * remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
7057 * remote-mips.c (mips_xfer_memory): Use gdb_byte.
7058 * remote.c (compare_sections_command): Use gdb_byte.
7059 * score-tdep.c (score7_free_memblock): Change type of parameter to
7061 * sh-tdep.c (sh_justify_value_in_reg): Change return type to
7062 gdb_byte *. Use gdb_byte.
7063 (sh_push_dummy_call_fpu): Use gdb_byte.
7064 (sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
7065 (sh_store_return_value_nofpu, sh_store_return_value_fpu)
7066 (sh_register_convert_to_virtual, sh_register_convert_to_raw):
7067 Change parameter type to 'gdb_byte *'. Use gdb_byte.
7068 (sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
7069 * sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
7070 (sh64_store_return_value, sh64_register_convert_to_virtual):
7071 Change parameter type to 'gdb_byte *'. Use gdb_byte.
7072 (sh64_pseudo_register_write): Use gdb_byte.
7073 * solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
7074 * solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
7076 (irix_current_sos): Use gdb_byte.
7077 * solib-som.c (som_current_sos): Use gdb_byte.
7078 * sparc-ravenscar-thread.c (supply_register_at_address)
7079 (sparc_ravenscar_generic_store_registers): Use gdb_byte.
7080 * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
7081 * spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
7082 * tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
7084 * tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
7086 * tracepoint.c (tfile_fetch_registers): Use gdb_byte.
7087 * xstormy16-tdep.c (xstormy16_extract_return_value)
7088 (xstormy16_store_return_value): Change parameter type to
7089 'gdb_byte *'. Adjust.
7090 (xstormy16_push_dummy_call): Use gdb_byte.
7091 * xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
7092 (call0_analyze_prologue, execute_code): Use gdb_byte.
7094 2013-04-19 Vladimir Kargov <kargov@gmail.com>
7095 Pedro Alves <palves@redhat.com>
7097 * i387-tdep.c (i387_print_float_info): Use gdb_byte for pointer to
7100 2013-04-17 Doug Evans <dje@google.com>
7102 * dwarf2read.c (struct signatured_type): New member type.
7103 (struct attribute): Replace member signatured_type with signature.
7104 (DW_SIGNATURE): Replaces DW_SIGNATURE_TYPE.
7105 (read_call_site_scope): Call follow_die_ref instead of
7106 follow_die_ref_or_sig.
7107 (read_structure_type): Rewrite handling of signatured types.
7108 (read_enumeration_type): Ditto.
7109 (read_attribute_value): Update.
7110 (build_error_marker_type): New function.
7111 (lookup_die_type): Add assert. Rewrite handling of signatured types.
7112 Don't call error for bad types, just build an error marker type.
7113 (dump_die_shallow): Update.
7114 (follow_die_sig_1): Renamed from follow_die_sig.
7115 Don't call error for bad types, instead return NULL.
7116 (follow_die_sig): New function.
7117 (get_signatured_type, get_DW_AT_signature_type): New functions.
7119 2013-04-17 Yufeng Zhang <yufeng.zhang@arm.com>
7121 * aarch64-tdep.c (aarch64_write_pc): Removed.
7122 (aarch64_gdbarch_init): Remove set_gdbarch_write_pc of the above
7125 2013-04-17 Yao Qi <yao@codesourcery.com>
7127 * top.c (print_gdb_configuration): Print configure-time
7128 parameter on using libbabeltrace or not.
7130 2013-04-16 Pedro Alves <palves@redhat.com>
7132 * copyright.py (EXCLUDE_LIST): Add gdb/common/glibc_thread_db.h.
7134 2013-04-16 Pedro Alves <palves@redhat.com>
7136 * common/glibc_thread_db.h: Update from upstream glibc
7137 (git 568035b7874a099087b77f7bba3e36a1173787b0).
7139 2013-04-16 Pedro Alves <palves@redhat.com>
7141 * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: Factor out to ...
7142 * common/glibc_thread_db.h: ... this new file ...
7143 * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: ... and include it.
7145 2013-04-16 Will Newton <will.newton@gmail.com>
7146 Pedro Alves <palves@redhat.com>
7150 * common/gdb_thread_db.h (LIBTHREAD_DB_SO)
7151 (LIBTHREAD_DB_SEARCH_PATH): Move outside of #ifdef
7154 2013-04-16 Pedro Alves <palves@redhat.com>
7155 Eli Zaretskii <eliz@gnu.org>
7157 * NEWS: Mention "set foo unlimited".
7159 2013-04-15 Doug Evans <dje@google.com>
7161 * dwarf2read.c (struct dwo_file): Replace member "cus" with "cu".
7162 (struct create_dwo_cu_data): Renamed from create_dwo_info_table_data.
7163 (create_dwo_cu_reader): Renamed from
7164 create_dwo_debug_info_hash_table_reader.
7165 (create_dwo_cu): Renamed from create_dwo_debug_info_hash_table.
7166 Remove support for multiple CUs in a DWO file.
7167 (open_and_init_dwo_file, lookup_dwo_cutu): Update.
7169 * dwarf2read.c (create_debug_types_hash_table): Use hex_string
7171 (lookup_dwo_unit, create_dwo_debug_info_hash_table_reader): Ditto.
7172 (create_dwo_in_dwp): Ditto.
7174 2013-04-15 Tom Tromey <tromey@redhat.com>
7176 * NEWS: Move recent entries into "since 7.6" section.
7178 2013-04-15 Tom Tromey <tromey@redhat.com>
7182 * break-catch-throw.c (struct exception_catchpoint)
7183 <exception_rx, pattern>: New fields.
7184 (fetch_probe_arguments, dtor_exception_catchpoint)
7185 (check_status_exception_catchpoint)
7186 (print_one_detail_exception_catchpoint): New functions.
7187 (handle_gnu_v3_exceptions): Add "except_rx" argument.
7188 Compile regular expression if needed.
7189 (extract_exception_regexp): New function.
7190 (catch_exception_command_1): Use extract_exception_regexp.
7191 (compute_exception): Use fetch_probe_arguments.
7192 (initialize_throw_catchpoint_ops): Set dtor, print_one_detail,
7193 and check_status fields.
7194 * cp-abi.c (cplus_typename_from_type_info): New function.
7195 * cp-abi.h (cplus_typename_from_type_info): Declare.
7196 (struct cp_abi_ops) <get_typename_from_type_info>: New field.
7197 * gdb_regex.h (compile_rx_or_error): Declare.
7198 * gnu-v3-abi.c (gnuv3_get_typename_from_type_info): Update
7200 (init_gnuv3_ops): Set get_type_from_type_info field.
7201 * probe.c (compile_rx_or_error): Move...
7202 * utils.c (compile_rx_or_error): ... here.
7204 2013-04-15 Tom Tromey <tromey@redhat.com>
7208 * break-catch-throw.c (compute_exception): New function.
7209 (exception_funcs): New global.
7210 (_initialize_break_catch_throw): Create $_exception.
7211 * cp-abi.c (cplus_type_from_type_info): New function.
7212 * cp-abi.h (cplus_type_from_type_info): Declare.
7213 (struct cp_abi_ops) <get_type_from_type_info>: New field.
7214 * gnu-v3-abi.c (gnuv3_get_typename_from_type_info)
7215 (gnuv3_get_type_from_type_info): New functions.
7216 (init_gnuv3_ops): Set get_type_from_type_info ABI field.
7218 2013-04-15 Tom Tromey <tromey@redhat.com>
7220 * break-catch-throw.c (struct exception_names): New.
7221 (exception_functions): Change type.
7222 (re_set_exception_catchpoint): Look for SDT probes.
7224 2013-04-15 Tom Tromey <tromey@redhat.com>
7227 * break-catch-throw.c (exception_functions): New global.
7228 (gnu_v3_exception_catchpoint_ops): Move earlier.
7229 (struct exception_catchpoint): New.
7230 (classify_exception_breakpoint): Rewrite.
7231 (re_set_exception_catchpoint): New function.
7232 (handle_gnu_v3_exceptions): Return void. Use init_catchpoint.
7233 Allocate a struct exception_catchpoint.
7234 (catch_exception_command_1): Update.
7235 (initialize_throw_catchpoint_ops): Set 're_set' method.
7237 2013-04-15 Tom Tromey <tromey@redhat.com>
7239 * Makefile.in (SFILES): Add break-catch-throw.c
7240 (COMMON_OBS): Add break-catch-throw.o.
7241 * break-catch-throw.c: New file.
7242 * breakpoint.c: Move exception-catching code to new file.
7243 (ep_parse_optional_if_clause): No longer static.
7244 * breakpoint.h (ep_parse_optional_if_clause): Declare.
7246 2013-04-15 Tom Tromey <tromey@redhat.com>
7250 * breakpoint.c (watchpoint_exp_is_const): Add OP_TYPEID.
7251 * c-exp.y (TYPEID): New token.
7252 (exp): Add new TYPEID productions.
7253 (ident_tokens): Add "typeid".
7254 * cp-abi.c (cplus_typeid, cplus_typeid_type): New functions.
7255 * cp-abi.h (cplus_typeid, cplus_typeid_type): Declare.
7256 (struct cp_abi_ops) <get_typeid, get_typeid_type>: New fields.
7257 * eval.c (evaluate_subexp_standard) <OP_TYPEID>: New case.
7258 * expprint.c (dump_subexp_body_standard) <OP_TYPEID>: New
7260 * gnu-v3-abi.c (std_type_info_gdbarch_data): New global.
7261 (build_std_type_info_type, gnuv3_get_typeid_type)
7262 (gnuv3_get_typeid): New functions.
7263 (init_gnuv3_ops): Initialize std_type_info_gdbarch_data. Set
7264 new fields on ABI object.
7265 * parse.c (operator_length_standard) <OP_TYPEID>: New case.
7266 * std-operator.def (OP_TYPEID): New.
7268 2013-04-15 Tom Tromey <tromey@redhat.com>
7270 * elfread.c (elf_symtab_read): Install versioned symbol under
7271 unversioned name as well.
7273 2013-04-15 Tom Tromey <tromey@redhat.com>
7276 * c-lang.c (cplus_language_defn): Use gdb_demangle.
7277 * c-typeprint.c (c_type_print_base): Use gdb_demangle.
7278 * cp-support.c (mangled_name_to_comp): Use gdb_demangle.
7279 (gdb_demangle): New function.
7280 * cp-support.h (gdb_demangle): Declare.
7281 * dwarf2read.c (dwarf2_physname, fixup_partial_die)
7282 (dwarf2_name): Use gdb_demangle.
7283 * gdbtypes.c (check_stub_method): Use gdb_demangle.
7284 * gnu-v3-abi.c (gnuv3_rtti_type): Strip @plt and version
7286 (gnuv3_print_method_ptr): Use gdb_demangle.
7287 * jv-lang.c (java_demangle): Use gdb_demangle.
7288 * jv-typeprint.c (java_type_print_base): Use gdb_demangle.
7289 * language.c (unk_lang_demangle): Use gdb_demangle.
7290 * symtab.c (symbol_find_demangled_name)
7291 (demangle_for_lookup): Use gdb_demangle.
7293 2013-04-15 Tom Tromey <tromey@redhat.com>
7297 * breakpoint.c (enum exception_event_kind) <EX_EVENT_RETHROW>:
7299 (classify_exception_breakpoint): New function.
7300 (print_it_exception_catchpoint, print_one_exception_catchpoint)
7301 (print_mention_exception_catchpoint)
7302 (print_recreate_exception_catchpoint, handle_gnu_v3_exceptions)
7303 (catch_exception_command_1): Handle "rethrow" catchpoint.
7304 (catch_rethrow_command): New function.
7305 (_initialize_breakpoint): Add "catch rethrow" command.
7307 2013-04-15 Pierre Muller <muller@sourceware.org>
7309 * contrib/ari/gdb_ari.sh (write_pc rule): Do not consider
7310 set_gdbarch_write_pc as deprecated anymore.
7312 2013-04-15 Joel Brobecker <brobecker@adacore.com>
7314 * spu-tdep.c (spu_write_pc): Add empty line after local variable
7317 2013-04-13 Yao Qi <yao@codesourcery.com>
7319 * ctf.c (_initialize_ctf): Include "completer.h".
7320 Call add_target_with_completer instead of add_target.
7322 2013-04-12 Jan Kratochvil <jan.kratochvil@redhat.com>
7324 Fix GDB regression related to PR binutils/14813.
7325 * jit.c (mem_bfd_iovec_close): Return 0 for success.
7326 * minidebug.c (lzma_close): Add return value comment.
7327 * remote.c (remote_bfd_iovec_close): Return 0 for success.
7328 * solib-spu.c (spu_bfd_iovec_close): Likewise.
7329 * spu-linux-nat.c (spu_bfd_iovec_close): Likewise.
7331 2013-04-12 Jan Kratochvil <jan.kratochvil@redhat.com>
7333 * config.in: Regenerate.
7335 2013-04-12 Tom Tromey <tromey@redhat.com>
7337 * dwarf2-frame.c (struct comp_unit) <dwarf_frame_buffer>: Now
7339 * dwarf2read.c (struct dwarf2_section_info) <buffer>: Now const.
7340 (struct die_reader_specs) <buffer>: Likewise.
7341 (die_reader_func_ftype): Make 'info_ptr' const.
7342 (struct line_header) <include_dirs, statement_program_start,
7343 statement_program_end>: Now const.
7344 (struct file_entry) <name>: Likewise.
7345 (struct partial_die_info) <sibling>: Likewise.
7346 (struct dwarf_block) <data>: Likewise.
7347 (dwarf2_read_section): Remove cast.
7348 (dwarf2_get_section_info): Make 'bufp' const.
7349 (read_index_from_section): Constify.
7350 (dw2_get_file_names_reader): Make 'info_ptr' const.
7351 (dw2_get_primary_filename_reader): Likewise.
7352 (read_comp_unit_head): Make 'info_ptr' and return type const.
7353 (read_and_check_comp_unit_head, read_and_check_type_unit_head):
7355 (read_abbrev_offset): Constify.
7356 (dwarf2_create_include_psymtab): Make 'name' const.
7357 (create_debug_types_hash_table): Update.
7358 (read_cutu_die_from_dwo): Make 'result_info_ptr' const.
7359 (init_cutu_and_read_dies, init_cutu_and_read_dies_no_follow):
7361 (process_psymtab_comp_unit_reader, build_type_psymtabs_reader)
7362 (load_partial_comp_unit_reader): Make 'info_ptr' const.
7363 (read_comp_units_from_section): Constify.
7364 (peek_abbrev_code, peek_die_abbrev, skip_children, skip_one_die)
7365 (locate_pdi_sibling, load_full_comp_unit_reader): Make 'info_ptr'
7367 (dwarf2_compute_name, setup_type_unit_groups): Constify.
7368 (create_dwo_debug_info_hash_table): Make 'info_ptr' const.
7369 (create_dwp_hash_table, dwarf2_ranges_read)
7370 (dwarf2_record_block_ranges): Constify.
7371 (read_die_and_children, read_die_and_siblings_1)
7372 (read_die_and_siblings): Make 'info_ptr' and 'new_info_ptr'
7374 (read_full_die_1, read_full_die): Make 'info_ptr' const.
7375 (abbrev_table_read_table): Constify.
7376 (load_partial_dies): Make 'info_ptr' const.
7377 (read_partial_die, read_attribute_value, read_attribute): Make
7378 'info_ptr' and return type const.
7379 (read_address, read_initial_length)
7380 (read_checked_initial_length_and_offset, read_offset)
7381 (read_offset_1, read_n_bytes, read_direct_string): Make 'buf'
7383 (read_direct_string): Make 'buf' and return type const.
7384 (read_indirect_string_at_offset, read_indirect_string_from_dwz)
7385 (read_indirect_string): Make return type const.
7386 (read_unsigned_leb128, read_signed_leb128): Make 'buf' const.
7387 (read_addr_index_from_leb128, dwarf2_read_addr_index_reader): Make
7389 (read_str_index): Make return type const.
7390 (add_include_dir): Make 'include_dir' const.
7391 (add_file_name): Make 'name' const.
7392 (dwarf_decode_line_header): Constify.
7393 (psymtab_include_file_name): Make return type const.
7394 (dwarf_decode_lines_1, dwarf_decode_lines): Constify.
7395 (dwarf2_start_subfile): Make 'filename' const.
7396 (dwarf2_const_value_attr): Make 'bytes' const.
7397 (read_signatured_type_reader): Make 'info_ptr' const.
7398 (decode_locdesc): Constify.
7399 (skip_form_bytes): Make 'bytes', 'buffer_end', and return type
7401 (skip_unknown_opcode): Make 'opcode_definitions', 'mac_ptr',
7402 'mac_end', and return type const.
7403 (dwarf_parse_macro_header): Make 'mac_ptr' and return type const.
7404 (dwarf_decode_macro_bytes): Make 'mac_ptr', 'mac_end', and return
7406 (per_cu_header_read_in): Constify.
7407 * symfile.h (dwarf2_get_section_info): Update.
7409 2013-04-12 Tom Tromey <tromey@redhat.com>
7411 * symtab.h (struct general_symbol_info) <value.bytes>: Make const.
7413 2013-04-12 Eli Zaretskii <eliz@gnu.org>
7415 * NEWS: Mention "show configuration", --configuration.
7416 * top.c (print_gdb_configuration): New function, displays the
7417 details about GDB configure-time parameters.
7418 (print_gdb_version): Mention "show configuration".
7419 * cli/cli-cmds.c (show_configuration): New function.
7420 (_initialize_cli_cmds): Add the "show configuration" command.
7421 * main.c (captured_main) <print_configuration>: New static var.
7422 <long_options>: Use it.
7423 If --configuration was given, call print_gdb_configuration.
7425 2013-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
7426 Pedro Alves <palves@redhat.com>
7428 * Makefile.in (HAVE_NATIVE_GCORE_TARGET): New.
7429 (generated_files): Add gcore.
7430 (install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or
7431 HAVE_NATIVE_GCORE_HOST.
7433 * NEWS (Changes since GDB 7.6): Mention newly installed gcore.
7434 * config/alpha/alpha-osf3.mh, config/i386/fbsd.mh,
7435 config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh,
7436 config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh,
7437 config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh:
7438 Add HAVE_NATIVE_GCORE_HOST.
7439 * configure: Regenerate.
7440 * configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it.
7441 New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME. New
7442 AC_CONFIG_FILES for gcore.
7443 * configure.tgt: Add gdb_have_gcore to the initial comment. Set
7445 * gdb_gcore.sh: Rename to ...
7446 * gcore.in: ... here. Remove gcore.sh comment. Use GDB_TRANSFORM_NAME
7447 and GCORE_TRANSFORM_NAME substitutions.
7449 Fix parsing tabs in ${gdb_target_obs}.
7450 * configure.tgt (gdb_have_gcore): Replace case with for and if.
7452 2013-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
7454 * remote.c (unpush_and_perror): Add output message final dot.
7456 2013-04-11 Yao Qi <yao@codesourcery.com>
7458 * tracepoint.c (tfile_interp_line): Fit parameters line and
7461 2013-04-10 Joel Brobecker <brobecker@adacore.com>
7463 * solib.c (solib_map_sections): Remove code overwriting
7464 SO->SO_NAME with the bfd's filename.
7466 2013-04-10 Pedro Alves <palves@redhat.com>
7468 * cli/cli-decode.c (integer_unlimited_completer): New function.
7469 (add_setshow_integer_cmd, add_setshow_uinteger_cmd)
7470 (add_setshow_zuinteger_unlimited_cmd): Install the "unlimited"
7472 * cli/cli-setshow.c: Include "cli/cli-utils.h".
7473 (is_unlimited_literal): New function.
7474 (do_set_command): Handle literal "unlimited" arguments.
7475 * frame.c (_initialize_frame) <set backtrace limit>: Document
7477 * printcmd.c (_initialize_printcmd) <set print
7478 max-symbolic-offset>: Add help text.
7479 * record-full.c (_initialize_record_full) <set record full
7480 insn-number-max>: Likewise.
7481 * record.c (_initialize_record) <set record
7482 instruction-history-size, set record function-call-history-size>:
7484 * ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add
7486 * tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>:
7488 * source.c (_initialize_source) <set listsize>: Add help text.
7489 * utils.c (initialize_utils) <set height, set width>: Likewise.
7490 <set pagination>: Mention "set height unlimited".
7491 * valprint.c (_initialize_valprint) <set print elements, set print
7492 repeats>: Document "unlimited".
7494 2013-04-10 Pedro Alves <palves@redhat.com>
7496 * cli/cli-cmds.c (quit_command): Call query_if_trace_running
7497 instead of disconnect_tracing.
7498 * infcmd.c (detach_command, disconnect_command): Call
7499 query_if_trace_running. Adjust.
7500 * top.c: Include "tracepoint.h".
7501 (quit_target): Delete. Contents moved ...
7502 (quit_force): ... here. Wrap each stage of teardown in
7503 TRY_CATCH. Call disconnect_tracing before detaching.
7505 2013-04-10 Hui Zhu <hui@codesourcery.com>
7506 Yao Qi <yao@codesourcery.com>
7508 * configure.ac: Check libbabeltrace is installed.
7509 * config.in: Regenerate.
7510 * configure: Regenerate.
7511 * Makefile.in (LIBBABELTRACE): New.
7512 (CLIBS): Add LIBBABELTRACE.
7513 * ctf.c: Include "exec.h".
7514 (CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros.
7515 (CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros.
7516 (ctf_save_metadata_header): Define new type aliases in
7518 (ctf_write_header): Define event type "tsv_def" and "tp_def"
7519 in metadata. Start a new faked packet for trace status.
7520 (ctf_write_status): Write trace status to CTF.
7521 (ctf_write_uploaded_tsv): Write TSV to CTF.
7522 (ctf_write_uploaded_tp): Write tracepoint definition to CTF.
7523 (ctf_write_definition_end): End the faked packet.
7525 (ctx, ctf_iter, trace_dirname): New.
7526 (start_pos): New variable.
7527 (ctf_destroy, ctf_open_dir, ctf_open): New.
7528 (SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New
7530 (ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New.
7531 (ctf_fetch_registers, ctf_xfer_partial): New.
7532 (ctf_get_trace_state_variable_value): New.
7533 (ctf_get_tpnum_from_frame_event): New.
7534 (ctf_get_traceframe_address): New.
7535 (ctf_trace_find, ctf_has_stack): New.
7536 (ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New.
7537 (ctf_get_trace_status, ctf_read_status): New.
7538 (_initialize_ctf): New.
7539 * tracepoint.c (get_tracepoint_number): New
7540 (get_uploaded_tsv): Remove 'static'.
7541 (struct traceframe_info, trace_regblock_size): Move it to ...
7542 * tracepoint.h: ... here.
7543 (get_tracepoint_number): Declare it.
7544 (get_uploaded_tsv): Declare it.
7546 * NEWS: Mention new configure option.
7548 2013-04-10 Pedro Alves <palves@redhat.com>
7549 Hui Zhu <hui@codesourcery.com>
7551 * breakpoint.c (dprintf_re_set): New.
7552 (initialize_breakpoint_ops): Set dprintf_breakpoint_ops re_set
7555 2013-04-09 Joel Brobecker <brobecker@adacore.com>
7557 * configure.tgt (gdb_target_obs) <powerpc-*-aix* | rs6000-*-*>:
7558 Remove solib-svr4.o from the list.
7560 2013-04-09 Joel Brobecker <brobecker@adacore.com>
7562 * varobj.c (update_dynamic_varobj_children) [!HAVE_PYTHON]:
7563 Use gdb_assert_not_reached instead of invalid boolean expression.
7565 2013-04-09 Pedro Alves <palves@redhat.com>
7567 * remote.c (unpush_and_perror): New function.
7568 (readchar, remote_serial_write): Use it.
7570 2013-04-09 Markus Metzger <markus.t.metzger@intel.com>
7572 * NEWS: Mention new btrace RSP packets.
7574 2013-04-08 Tom Tromey <tromey@redhat.com>
7576 * symmisc.c (dump_msymbols): Cast fprintf_filtered argument to
7579 2013-04-08 Tom Tromey <tromey@redhat.com>
7581 * maint.c (print_bfd_section_info): Print the section index.
7582 * symmisc.c (dump_msymbols): Print the section index.
7584 2013-04-08 Tom Tromey <tromey@redhat.com>
7587 * blockframe.c (find_pc_partial_function_gnu_ifunc): Check
7588 SYMBOL_SECTION, not SYMBOL_OBJ_SECTION.
7589 * breakpoint.c (resolve_sal_pc): Update.
7590 * elfread.c (elf_gnu_ifunc_record_cache): Update.
7591 * findvar.c (struct minsym_lookup_data) <objfile>: New field.
7592 (minsym_lookup_iterator_cb): Use it.
7593 (default_read_var_value): Update.
7594 * hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline):
7596 * infcmd.c (jump_command): Update.
7597 * linespec.c (minsym_found): Update.
7598 * maint.c (maintenance_translate_address): Update.
7599 * minsyms.c (lookup_minimal_symbol_by_pc_section_1): Update.
7600 (prim_record_minimal_symbol_full): Don't set SYMBOL_OBJ_SECTION.
7601 * parse.c (write_exp_msymbol): Update.
7602 * printcmd.c (address_info): Update.
7603 * psymtab.c (find_pc_sect_psymbol): Update.
7604 (fixup_psymbol_section): Check SYMBOL_SECTION, not
7606 (add_psymbol_to_bcache): Correctly initialize SYMBOL_SECTION.
7607 Don't initialize SYMBOL_OBJ_SECTION.
7608 * spu-tdep.c (spu_catch_start): Update.
7609 * stabsread.c (define_symbol): Don't set SYMBOL_SECTION.
7610 * symmisc.c (dump_msymbols, print_symbol): Update.
7611 * symtab.c (fixup_section): Don't set 'obj_section'. Change
7612 how fallback section is computed.
7613 (fixup_symbol_section): Update.
7614 (find_pc_sect_symtab, find_function_start_sal, skip_prologue_sal):
7616 (allocate_symbol, initialize_symbol, allocate_template_symbol):
7617 Initialize SYMBOL_SECTION.
7618 * symtab.h (struct general_symbol_info) <section>: Update comment.
7619 <obj_section>: Remove.
7620 (SYMBOL_OBJ_SECTION): Add 'objfile' argument. Rewrite.
7621 (SYMBOL_OBJFILE): New macro.
7623 2013-04-08 Tom Tromey <tromey@redhat.com>
7625 * coffread.c (record_minimal_symbol): Update.
7626 * dbxread.c (record_minimal_symbol): Update.
7627 * elfread.c (record_minimal_symbol): Update.
7628 * machoread.c (macho_symtab_add_minsym): Update.
7629 * mdebugread.c (record_minimal_symbol, parse_partial_symbols):
7631 * minsyms.c (prim_record_minimal_symbol): Update.
7632 (prim_record_minimal_symbol_full): Remove 'bfd_section'
7634 (prim_record_minimal_symbol_and_info): Likewise.
7635 * minsyms.h (prim_record_minimal_symbol_full)
7636 (prim_record_minimal_symbol_and_info): Update.
7637 * symtab.c (allocate_symbol, initialize_symbol)
7638 (allocate_template_symbol): Initialize SYMBOL_SECTION.
7639 * xcoffread.c (record_minimal_symbol, scan_xcoff_symtab):
7642 2013-04-08 Tom Tromey <tromey@redhat.com>
7645 * solib-som.c (som_solib_section_offsets): Use BFD section
7646 indices. Set offsets for all sections.
7647 * somread.c (som_symtab_read): Compute BFD section for
7648 symbol. Use prim_record_minimal_symbol_and_info.
7649 (som_symfile_read): Fix comment.
7650 (struct find_section_offset_arg): New.
7651 (find_section_offset, set_section_index): New functions.
7652 (som_symfile_offsets): Use set_section_index to compute
7655 2013-04-08 Tom Tromey <tromey@redhat.com>
7657 * coffread.c (cs_to_section): Use gdb_bfd_section_index.
7658 * elfread.c (record_minimal_symbol, elf_symtab_read): Use
7659 gdb_bfd_section_index.
7660 * gdb_bfd.c (gdb_bfd_section_index, gdb_bfd_count_sections):
7662 * gdb_bfd.h (gdb_bfd_section_index, gdb_bfd_count_sections):
7664 * machoread.c (macho_symtab_add_minsym, macho_symfile_offsets):
7666 * objfiles.c (add_to_objfile_sections_full): New function.
7667 (add_to_objfile_sections): Use it.
7668 (build_section_table): Rewrite.
7669 (objfile_relocate1): Use gdb_bfd_section_index. Update.
7670 * objfiles.h (obj_section_offset): Use gdb_bfd_section_index.
7671 (struct objfile) <sections>: Update comment.
7672 (ALL_OBJFILE_OSECTIONS): Skip sections where the_bfd_section
7674 (ALL_OBJSECTIONS): Use it.
7675 * solib-dsbt.c (dsbt_relocate_main_executable): Update.
7676 * solib-frv.c (frv_relocate_main_executable): Update.
7677 * solib-target.c (solib_target_relocate_section_addresses):
7678 Use gdb_bfd_section_index.
7679 * symfile.c (build_section_addr_info_from_section_table):
7680 Use gdb_bfd_section_index.
7681 (build_section_addr_info_from_bfd, place_section): Likewise.
7682 * symtab.c (fixup_section): Update.
7683 * xcoffread.c (find_targ_sec): Use gdb_bfd_section_index.
7685 2013-04-08 Tom Tromey <tromey@redhat.com>
7687 * minsyms.h (struct bound_minimal_symbol): New.
7688 (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
7689 Remove objfile argument.
7690 (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
7691 Return bound_minimal_symbol.
7692 * minsyms.c (lookup_minimal_symbol_by_pc_1)
7693 (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
7694 Return bound_minimal_symbol.
7695 (in_gnu_ifunc_stub): Update.
7696 (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
7697 Remove 'objfile_p' argument.
7698 (lookup_solib_trampoline_symbol_by_pc): Update.
7699 * ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c,
7700 arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c,
7701 c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c,
7702 glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c,
7703 i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c,
7704 linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c,
7705 mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c,
7706 ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c,
7707 stack.c, symtab.c, tui/tui-disasm.c: Update.
7709 2013-04-08 Tom Tromey <tromey@redhat.com>
7711 * ada-lang.c (ada_decode_symbol): Check and set 'ada_mangled'.
7712 Use symbol's obstack, not an objfile.
7713 * coffread.c (process_coff_symbol): Update.
7714 * dwarf2read.c (fixup_go_packaging, new_symbol_full): Update.
7715 * jv-lang.c (add_class_symbol): Update.
7716 * mdebugread.c (new_symbol): Update.
7717 * minsyms.c (prim_record_minimal_symbol_full)
7718 (terminate_minimal_symbol_table): Update.
7719 * psymtab.c (add_psymbol_to_bcache): Clear entire symbol. Update.
7720 * stabsread.c (define_symbol, read_enum_type): Update.
7721 * symtab.c (symbol_set_demangled_name, symbol_get_demangled_name):
7722 Handle Ada specially.
7723 (symbol_set_language): Add 'obstack' argument.
7724 (symbol_set_names): Update.
7725 (symbol_natural_name, symbol_demangled_name): Always use
7727 * symtab.h (struct general_symbol_info)
7728 <language_specific::obstack>: New field.
7729 <ada_mangled>: New field.
7730 (SYMBOL_SET_LANGUAGE): Add 'obstack' argument.
7731 (symbol_set_language): Update.
7733 2013-04-08 Tom Tromey <tromey@redhat.com>
7735 * symtab.c (symbol_init_cplus_specific, symbol_set_demangled_name):
7736 Take an obstack, not an objfile.
7737 (symbol_set_names): Update.
7738 * symtab.h (symbol_set_demangled_name): Update.
7740 2013-04-08 Tom Tromey <tromey@redhat.com>
7742 * coffread.c (process_coff_symbol, coff_read_enum_type): Call
7744 * dwarf2read.c (fixup_go_packaging): Call allocate_symbol.
7745 (read_func_scope): Call allocate_template_symbol.
7746 (new_symbol_full): Call allocate_symbol.
7747 * jit.c (finalize_symtab): Call allocate_symbol.
7748 * jv-lang.c (add_class_symbol): Call allocate_symbol.
7749 * mdebugread.c (parse_symbol, new_block): Call allocate_symbol.
7750 * stabsread.c (patch_block_stabs, define_symbol, read_enum_type)
7751 (common_block_end): Call allocate_symbol.
7752 * symtab.c (allocate_symbol, initialize_symbol)
7753 (allocate_template_symbol): New functions.
7754 * symtab.c (allocate_symbol, initialize_symbol)
7755 (allocate_template_symbol): Declare.
7756 * xcoffread.c (process_xcoff_symbol): Call initialize_symbol.
7758 2013-04-08 Pedro Alves <palves@redhat.com>
7759 Keith Seitz <keiths@redhat.com>
7761 * breakpoint.c (create_breakpoint): Rename
7762 "parse_condition_and_thread" parameter to "parse_arg". Update
7763 describing comment. If !PARSE_ARG, then error out if ARG is not
7764 the empty string after extracting the location.
7765 * breakpoint.h (create_breakpoint): Rename
7766 "parse_condition_and_thread" parameter to "parse_arg".
7768 2013-04-08 Aleksandar Ristovski <aristovski@qnx.com
7770 * solib-svr4.c (lm_addr_check): Add const qualifier to 'so' arg.
7772 2013-04-07 Yao Qi <yao@codesourcery.com>
7774 * remote.c (remote_trace_find): Change type of parameters 'addr1'
7775 and 'addr2' to CORE_ADDR.
7776 * target.c (update_current_target): Update.
7777 * target.h (struct target_ops) <to_trace_find>: Change parameter
7779 * tracepoint.c (tfind_1): Change type of parameters 'addr1' and
7780 'addr2' to CORE_ADDR.
7781 (tfile_trace_find): Likewise.
7782 (tfile_get_traceframe_address): Change return type to CORE_ADDR.
7783 Change local variable 'addr' to type CORE_ADDR.
7784 * tracepoint.h (tfind_1): Update declaration.
7786 2013-04-06 Eli Zaretskii <eliz@gnu.org>
7788 * windows-nat.c (windows_get_absolute_argv0): Move from here...
7789 * mingw-hdep.c (windows_get_absolute_argv0): ...to here.
7792 * windows-nat.h (windows_get_absolute_argv0): Move prototype from
7794 * main.h (windows_get_absolute_argv0): ...to here.
7796 2013-04-05 Doug Evans <dje@google.com>
7798 * dwarf2read.c (struct dwarf2_per_objfile): Tweak comment.
7799 (read_cutu_die_from_dwo): Add comments.
7800 (read_structure_type): Update comment.
7801 (read_enumeration_type, read_namespace_type): Update comment.
7802 (read_die_type, get_die_type_at_offset, get_die_type): Update comment.
7804 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
7806 Convert man pages to texinfo, new gdbinit.5 texinfo page.
7807 * Makefile.in (gdb.z): Remove.
7808 (install-only): Remove $(man1dir) and gdb.1 installation.
7811 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
7813 Fix compatibility with Linux kernel 3.8.3.
7814 * linux-tdep.c (linux_find_memory_regions_full): Move variable number
7815 to more inner block. Remove parsing of NUMBER from outer block.
7816 Parse NUMBER only if KEYWORD has been identified.
7818 2013-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
7820 Fix variable name shadowing.
7821 * linux-tdep.c (linux_find_memory_regions_full): Rename outer variable
7822 filename to mapsfilename and update its uses.
7824 2013-04-05 Eli Zaretskii <eliz@gnu.org>
7826 * Makefile.in (TAGS): Avoid warning from etags when $GDB_NM_FILE is
7827 empty. See http://sourceware.org/ml/gdb-patches/2012-08/msg00504.html
7828 and http://sourceware.org/ml/gdb-patches/2013-04/msg00055.html for
7829 details of the problem.
7831 2013-04-04 Pedro Alves <palves@redhat.com>
7832 Hui Zhu <hui@codesourcery.com>
7834 * breakpoint.c (validate_commands_for_breakpoint): If validating a
7835 tracepoint, reset its STEP_COUNT and call validate_actionline.
7837 2013-04-03 Doug Evans <dje@google.com>
7839 * dwarf2read.c (read_die_and_siblings_1): Renamed from
7840 read_die_and_siblings.
7841 (read_die_and_siblings): New function.
7842 (read_cutu_die_from_dwo): Dump die if requested.
7843 (read_die_and_children): Call read_full_die_1 and
7844 read_die_and_siblings_1.
7845 (read_full_die): Dump die if requested.
7847 * dwarf2read.c (read_comp_units_from_section): Add debugging printf.
7849 * dwarf2read.c (struct dwo_file): New member comp_dir.
7850 Rename member name to dwo_name. All uses updated.
7851 (hash_dwo_file): Include comp_dir in computation.
7852 (eq_dwo_file): Ditto.
7853 (lookup_dwo_file_slot): New arg comp_dir. All callers updated.
7854 (create_dwo_in_dwp, lookup_dwo_in_dwp, open_and_init_dwo_file): Ditto.
7856 * psymtab.c (read_psymtabs_with_fullname): Don't call
7857 psymtab_to_fullname if the basenames are different.
7859 2013-04-03 Jan Kratochvil <jan.kratochvil@redhat.com>
7861 * NEWS (Changes in GDB 7.6): Update the data-disassemble for "fullname".
7862 New entry about "fullname" presence.
7864 2013-04-03 Pedro Alves <palves@redhat.com>
7866 * NEWS: Mention x86_64/Cygwin as new native configuration.
7868 2013-04-02 Doug Evans <dje@google.com>
7870 * dwarf2read.c (read_structure_type): Fix typo in comment.
7872 2013-04-02 Pedro Alves <palves@redhat.com>
7874 * NEWS: Mention "set/show debug aarch64", "set/show debug
7875 coff-pe-read" and "set/show debug mach-o".
7877 2013-04-02 Pedro Alves <palves@redhat.com>
7879 * NEWS: Mention "set/show remote trace-buffer-size-packet".
7881 2013-04-02 Eli Zaretskii <eliz@gnu.org>
7883 * Makefile.in (HFILES_NO_SRCDIR): Remove call-cmds.h.
7884 gdb_string.h is now in common/.
7886 2013-04-02 Pedro Alves <palves@redhat.com>
7888 * NEWS: Move "set debug notification" and "set trace-buffer-size"
7889 under "New options".
7891 2013-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
7895 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
7897 2013-04-02 Pedro Alves <palves@redhat.com>
7901 * remote.c (send_interrupt_sequence): Use remote_serial_write.
7902 (remote_serial_write): New function.
7903 (putpkt_binary, getpkt_or_notif_sane_1): Use remote_serial_write.
7905 2013-04-01 Jiong Wang <jiwang@tilera.com>
7907 * NEWS: Mention TILE-Gx in "New native configurations" and
7908 "New targets" sections.
7910 2013-04-01 Doug Evans <dje@google.com>
7912 * dwarf2read.c (lookup_signatured_type_at_offset): Delete.
7913 (process_enumeration_scope): Simplify.
7915 * dwarf2read.c (struct dwarf2_per_cu_data): Move member
7917 (struct signatured_type): ... to here.
7918 (sig_type_ptr): New typedef.
7919 (type_unit_group): Delete member 't.first_cu'. Move member 'tus'
7920 out of union 't'. All uses updated.
7921 (dw2_get_file_names_reader): Assert not called for a type unit.
7922 (dw2_get_file_names): Assert not called for a type unit or type
7924 (build_type_psymtabs_reader): Assert called for a type unit.
7925 (build_type_psymtab_dependencies): Assert called for a type unit group.
7927 * dwarf2read.c (free_dwo_file): Add comment.
7928 (dwarf2_per_objfile_free): Unref dwp bfd.
7930 2013-04-01 Aleksandar Ristovski <aristovski@qnx.com>
7932 * coff-pe-read.c (add_pe_exported_sym): Remove unused 'dll_name_len'.
7933 (add_pe_forwarded_sym): Remove unused 'section', 'dll_name_len'.
7934 (read_pe_exported_syms): Remove unused 'exportix'.
7935 (pe_text_section_offset): Remove unused 'opthdr_ofs', 'num_entries',
7936 'export_rva', 'export_size', 'expptr', 'exp_funcbase', 'expdata',
7937 'erva', 'name_rvas', 'ordinals', 'nexp', 'ordbase', 'dll_name'.
7939 2013-04-01 Aleksandar Ristovski <aristovski@qnx.com>
7941 * breakpoint.c (parse_cond_to_aexpr): Remove unused 'old_chain'.
7942 (print_it_watchpoint): Remove unused 'bl'.
7943 (say_where): Remove unused 'uiout'.
7944 (bpstat_remove_breakpoint_callback): Remove unused 'uiout'.
7945 (bkpt_breakpoint_hit): Remove unused 'b'.
7946 (internal_bkpt_print_it): Remove unused 'uiout'.
7947 * buildsym.c (augment_type_symtab): Remove unused 'i'.
7949 2013-03-31 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
7951 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_float): New function.
7952 (ppc64_sysv_abi_push_dummy_call): Handle complex arguments.
7954 2013-03-29 Doug Evans <dje@google.com>
7956 * dwarf2read.c (open_dwo_file): Renamed from open_dwop_file.
7957 Delete arg is_dwp. All callers updated.
7958 (open_dwp_file): New function.
7959 (open_and_init_dwp_file): Call it.
7960 (get_dwp_file): New function.
7961 (lookup_dwo_cutu): Call it.
7963 * dwarf2read.c (open_and_init_dwp_file): Remove incorrect, and
7964 unnecessary, cleanup.
7966 * dwarf2read.c (lookup_dwo_cutu): Improve complaint text.
7968 * dwarf2read.c (read_cutu_die_from_dwo): New function.
7969 (lookup_dwo_unit): New function.
7970 (init_cutu_and_read_dies): Move DWO handling to new functions.
7972 * dwarf2read.c (struct signatured_type): Tweak comment.
7973 (struct dwo_unit): Tweak comment.
7974 (create_debug_types_hash_table): Tweak comment. Reformat long line.
7975 (create_dwo_debug_info_hash_table): Tweak comment.
7976 (dwarf2_per_cu_offset_and_type): Tweak comment.
7978 * dwarf2read.c (lookup_signatured_type): Remove complaint about
7979 missing .debug_types section.
7981 2013-03-29 Yao Qi <yao@codesourcery.com>
7983 * corelow.c: Include "completer.h".
7984 (_initialize_corelow): Call add_target_with_completer with
7985 argument 'filename_completer'.
7986 * tracepoint.c: Likewise.
7987 * exec.c (_initialize_exec): Likewise.
7988 * target.c (add_target): Rename to ...
7989 (add_target_with_completer): ... this. Call set_cmd_completer
7990 if parameter completer is not NULL.
7992 * target.h: Include "command.h".
7993 (add_target_with_completer): Declare it.
7995 2013-03-28 Joel Brobecker <brobecker@adacore.com>
7997 * coffread.c (is_import_fixup_symbol): New function.
7998 (record_minimal_symbol): Use is_import_fixup_symbol to
7999 detect import fixup symbols, and discard them.
8001 2013-03-28 Doug Evans <dje@google.com>
8003 * dwarf2read.c (create_debug_types_hash_table): Don't allocate the
8004 types hash table until we know we need it.
8006 * dwarf2read.c (create_addrmap_from_index): Complain about bad CU
8009 * dwarf2read.c (dw2_get_file_names): Delete arg "objfile".
8010 All callers updated.
8011 (dw2_print_stats): Print #read CUs too.
8012 (dump_die_shallow): Print signatured types better.
8014 * dwarf2read.c (struct dwarf2_per_cu_data): Rename member
8015 info_or_types_section to section. All uses updated.
8016 (struct dwo_unit): Ditto.
8018 2013-03-28 Pedro Alves <palves@redhat.com>
8020 * NEWS (New options): New section.
8021 (New options): Mention set/show remote trace-status-packet.
8022 * remote.c (PACKET_qTStatus): New enumeration value.
8023 (remote_get_trace_status): Skip sending qTStatus if the packet is
8024 disabled. Use packet_ok.
8025 (_initialize_remote): Register a configuration command for
8028 2013-03-28 Doug Evans <dje@google.com>
8030 * symfile.c (find_separate_debug_file): Add comment.
8031 (terminate_after_last_dir_separator): Tweak comment.
8033 * dwarf2read.c (create_partial_symtab): Add forward decl.
8034 (create_partial_symtab): Move to be closer to other psymtab functions.
8035 (process_psymtab_comp_unit_reader, process_psymtab_comp_unit): Ditto.
8037 * dwarf2read.c (dwarf2_physname): Move declaration to better spot.
8038 (compute_symtab_includes): Remove unnecessary forward declaration.
8039 (die_needs_namespace): Add comment marking group of functions for
8040 dwarf2 name computation.
8042 * typeprint.c (_initialize_typeprint): Improve type help text.
8044 * python/python.c (finish_python_initialization): Provide suggestion
8045 for how to tell gdb to find its python files.
8047 2013-03-28 Pedro Alves <palves@redhat.com>
8051 * source.c (_initialize_source): Change back "set listsize" to an
8054 2013-03-27 Gareth McMullin <gareth@blacksphere.co.nz>
8057 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
8059 2013-03-27 Pedro Alves <palves@redhat.com>
8061 * top.c (history_size): Rename to ...
8062 (history_size_setshow_var): ... this. Add comment.
8063 (show_commands): Use readline's 'history_length' instead of
8064 computing the history length by calling history_get in a loop.
8065 (set_history_size_command): Error out for sizes over INT_MAX.
8066 Restore previous history size on invalid size.
8067 (init_history): If HISTSIZE is negative, leave the history size as
8069 (init_main): Adjust.
8071 2013-03-27 Pedro Alves <palves@redhat.com>
8073 * coff-pe-read.c (_initialize_coff_pe_read): Rename "set debug
8074 coff_pe_read" command to "set debug coff-pe-read".
8076 2013-03-27 Markus Metzger <markus.t.metzger@intel.com>
8078 * record.c (command_size_to_target_size): Fix size comparison.
8079 Change parameter type from pointer to integer to integer.
8082 2013-03-27 Pierre Muller <muller@sourceware.org>
8084 * windows-nat.c (handle_output_debug_string): Avoid typecast
8085 from integer of different size warning.
8087 2013-03-26 Joel Brobecker <brobecker@adacore.com>
8089 * windows-nat.c (handle_output_debug_string): Add empty line
8090 after local block variable definition.
8092 2013-03-26 Pedro Alves <palves@redhat.com>
8094 * ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned.
8095 (net_open): Make 'polls' local unsigned.
8097 2013-03-26 Pedro Alves <palves@redhat.com>
8099 * remote.c (_initialize_remote): Make "set remoteaddresssize"
8100 a zuinteger command instead of uinteger.
8102 2013-03-26 Pedro Alves <palves@redhat.com>
8104 * record-full.c (record_full_insn_num): Make it unsigned.
8105 (record_full_check_insn_num, record_full_message)
8106 (record_full_registers_change, record_full_xfer_partial): Remove
8107 record_full_insn_max_num check (it's always != 0).
8108 (record_full_info, record_full_restore): Use %u as format string.
8109 (): Use %u as format string.
8110 (set_record_full_insn_max_num): Remove record_full_insn_max_num
8111 check (it's always != 0).
8113 2013-03-26 Pedro Alves <palves@redhat.com>
8115 * dcache.c (_initialize_dcache): Make the "set dcache line-size"
8116 and "set dcache size" commands zuinteger instead of uinteger.
8118 2013-03-26 Pedro Alves <palves@redhat.com>
8120 * cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
8121 command zuinteger instead of uinteger.
8123 2013-03-26 Pedro Alves <palves@redhat.com>
8125 * coff-pe-read.c (_initialize_coff_pe_read): Make the command
8126 zuinteger instead of uinteger.
8128 2013-03-26 Pedro Alves <palves@redhat.com>
8130 * record.c (record_insn_history_size_setshow_var)
8131 (record_call_history_size_setshow_var): New globals.
8132 (command_size_to_target_size): New function.
8133 (cmd_record_insn_history, cmd_record_call_history): Use
8134 command_size_to_target_size instead of cast.
8135 (validate_history_size, set_record_insn_history_size)
8136 (set_record_call_history_size): New functions.
8137 (_initialize_record): Install set_record_insn_history_size and
8138 set_record_call_history_size as "set" hooks of "set record
8139 instruction-history-size" and "set record
8140 function-call-history-size".
8142 2013-03-26 Pedro Alves <palves@redhat.com>
8144 * top.c (gdb_rl_operate_and_get_next): Replace max_input_history
8145 use with history_max_entries use. Remove FIXME note.
8147 2013-03-26 Markus Metzger <markus.t.metzger@intel.com>
8149 * record-btrace.c (record_btrace_close): Call
8150 record_btrace_auto_disable.
8152 2013-03-25 Joel Brobecker <brobecker@adacore.com>
8154 * rs6000-nat.c (fixup_breakpoints): Delete declaration.
8156 2013-03-25 Doug Evans <dje@google.com>
8158 * contrib/cc-with-tweaks.sh: Check exit code of dwp.
8160 2013-03-25 Tom Tromey <tromey@redhat.com>
8163 * c-exp.y (exp): Add new productions for destructors after '.' and
8165 (write_destructor_name): New function.
8167 2013-03-25 Tom Tromey <tromey@redhat.com>
8170 * opencl-lang.c (evaluate_subexp_opencl) <STRUCTOP_STRUCT>: Use
8171 value_struct_elt, not lookup_struct_elt_type.
8172 * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
8173 STRUCTOP_PTR>: Use value_struct_elt, not lookup_struct_elt_type.
8174 * expression.h (EVAL_AVOID_SIDE_EFFECTS): Update comment.
8176 2013-03-25 Yao Qi <yao@codesourcery.com>
8178 * ctf.c [USE_WIN32API]: Undef 'mkdir' and use 'mkdir'
8179 instead of '_mkdir'.
8181 2013-03-23 Eli Zaretskii <eliz@gnu.org>
8183 * windows-nat.c (windows_get_absolute_argv0): New function.
8184 * windows-nat.h: Add its prototype.
8186 * main.c (get_init_files): Use filename_ncmp instead of strncmp.
8187 Use IS_DIR_SEPARATOR instead of looking for a character inside
8188 SLASH_STRING. Include filenames.h.
8189 (captured_main) [__MINGW32__]: Make argv[0] absolute, so that
8190 relocate_gdb_directory works when passed gdb_program_name.
8191 Include windows-nat.h.
8193 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
8195 * exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
8196 * remote.c (trace_error): Remove the special handling of '2'.
8197 (readchar) <SERIAL_EOF>
8198 (readchar) <SERIAL_ERROR>
8199 (getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
8200 (remote_get_trace_status): Call throw_exception if EX is
8202 * utils.c (perror_with_name): Rename to ...
8203 (throw_perror_with_name): ... here. New parameter errcode, describe it
8204 in the function comment.
8205 (perror_with_name): New function wrapper.
8206 * utils.h (enum errors): New stub declaration.
8207 (throw_perror_with_name): New declaration.
8209 2013-03-22 Pedro Alves <palves@redhat.com>
8210 Yao Qi <yao@codesourcery.com>
8211 Mark Kettenis <kettenis@gnu.org>
8213 * cli/cli-setshow.c (do_set_command) <var_uinteger>:
8214 Don't let the user set the value to UINT_MAX directly.
8215 <var_integer>: Don't let the user set the value to INT_MAX
8218 2013-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
8220 * remote.c (remote_unpush_target): New function.
8221 (remote_open_1): Remove two pop_target calls, update one comment, add
8222 comment to target_preopen call. Replace pop_target call by
8223 remote_unpush_target call.
8224 (interrupt_query, readchar, getpkt_or_notif_sane_1): Replace
8225 pop_target calls by remote_unpush_target calls.
8227 2013-03-22 Pedro Alves <palves@redhat.com>
8229 * linux-nat.c (linux_child_follow_fork): Don't call
8230 linux_enable_event_reporting.
8231 (linux_handle_extended_wait): Don't call
8232 linux_enable_event_reporting.
8234 2013-03-22 Pedro Alves <palves@redhat.com>
8236 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro,
8237 use it to rewrite the trampoline buffers with type gdb_byte[], and
8238 undefine the macro. Remove char* cast.
8240 2013-03-21 Doug Evans <dje@google.com>
8242 New commands "mt set per-command {space,time,symtab} {on,off}".
8244 * event-top.c: #include "maint.h".
8245 * main.c: #include "maint.h".
8246 * maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
8247 timeval-utils.h, maint.h, cli/cli-setshow.h.
8248 (per_command_time, per_command_space): New static globals.
8249 (per_command_symtab): New static global.
8250 (per_command_setlist, per_command_showlist): New static globals.
8251 (struct cmd_stats): Move here from utils.c.
8252 (set_per_command_time): Renamed from set_display_time in utils.c
8253 and moved here. All callers updated.
8254 (set_per_command_space): Renamed from set_display_space in utils.c
8255 and moved here. All callers updated.
8256 (count_symtabs_and_blocks): New function.
8257 (report_command_stats): Moved here from utils.c. Add support for
8258 printing symtab stats. Only print data if enabled before command
8260 (make_command_stats_cleanup): Ditto.
8261 (sert_per_command_cmd, show_per_command_cmd): New functions.
8262 (_initialize_maint_cmds): Add new commands
8263 mt set per-command {space,time,symtab} {on,off}.
8264 * maint.h: New file.
8265 * top.c: #include "maint.h".
8266 * utils.c (reset_prompt_for_continue_wait_time): New function.
8267 (get_prompt_for_continue_wait_time): New function.
8268 * utils.h (reset_prompt_for_continue_wait_time): Declare
8269 (get_prompt_for_continue_wait_time): Declare.
8270 (make_command_stats_cleanup): Moved to maint.h.
8271 (set_display_time, set_display_space): Moved to maint.h and renamed
8272 to set_per_command_time, set_per_command_space.
8273 * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
8274 parse_binary_operation and made non-static. Don't call error,
8275 just return an error marker. All callers updated.
8276 * cli/cli-setshow.h (parse_cli_boolean_value): Declare.
8278 2013-03-21 Tom Tromey <tromey@redhat.com>
8280 * symfile.c (alloc_section_addr_info): Update header. Don't set
8281 'num_sections' field.
8282 (build_section_addr_info_from_section_table): Set 'num_sections'.
8283 (build_section_addr_info_from_bfd): Likewise.
8284 (build_section_addr_info_from_objfile): Remove dead loop
8286 (free_section_addr_info): Unconditionally call xfree.
8287 (relative_addr_info_to_section_offsets, addrs_section_sort)
8288 (addr_info_make_relative, syms_from_objfile_1): Remove dead loop
8290 (syms_from_objfile_1): Remove dead 'if' condition. Check
8292 (add_symbol_file_command): Set 'num_sections'.
8293 * symfile-mem.c (symbol_file_add_from_memory): Set
8295 * somread.c (som_symfile_offsets): Remove dead loop condition.
8296 * machoread.c (macho_symfile_offsets): Remove dead 'if'.
8297 * jit.c (jit_bfd_try_read_symtab): Set 'num_sections'.
8299 2013-03-21 Tom Tromey <tromey@redhat.com>
8301 * tracepoint.h (decode_agent_options): Add 'trace_string'
8303 * tracepoint.c (decode_agent_options): Add 'trace_string'
8305 (validate_actionline): Update.
8306 (collect_symbol): Add 'trace_string' argument.
8307 (struct add_local_symbols_data) <trace_string>: New field.
8308 (do_collect_symbol): Update.
8309 (add_local_symbols): Add 'trace_string' argument.
8310 (encode_actions_1): Update.
8311 (trace_dump_actions): Update.
8312 * dwarf2loc.c (access_memory): Update.
8313 * ax.h (struct agent_expr) <tracing, trace_string>: New fields.
8314 * ax-general.c (new_agent_expr): Update.
8315 * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
8316 (gen_trace_for_return_address): Add argument.
8317 (trace_kludge, trace_string_kludge): Remove.
8318 * ax-gdb.c (trace_kludge, trace_string_kludge): Remove.
8319 (gen_traced_pop, gen_fetch, gen_bitfield_ref, gen_expr): Update.
8320 (gen_trace_for_var): Add 'trace_string' argument.
8321 (gen_trace_for_expr, gen_trace_for_return_address): Likewise.
8322 (gen_printf, agent_eval_command_one): Update.
8324 2013-03-21 Tom Tromey <tromey@redhat.com>
8327 * c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
8328 Handle FILENAME token.
8330 2013-03-21 Tom Tromey <tromey@redhat.com>
8332 * c-exp.y (YYPRINT): Define.
8333 (c_print_token): New function.
8335 2013-03-21 Tom Tromey <tromey@redhat.com>
8337 * c-exp.y (%union) <sym, ivar, ivec>: Remove.
8339 2013-03-21 Yao Qi <yao@codesourcery.com>
8341 * ctf.c: Include "gdb_stat.h".
8342 [USE_WIN32API]: New macro 'mkdir'.
8343 (ctf_start): Use permission bits macros if they are defined.
8345 2013-03-20 Keith Seitz <keiths@redhat.com>
8347 * breakpoint.h (struct breakpoint): Add comment to
8348 extra_string indicating that this member is mallod'd.
8349 * breakpoint.c (base_breakpoint_dtor): Free extra_string.
8351 2013-03-20 Pedro Alves <palves@redhat.com>
8355 * cli/cli-setshow.c (do_set_command)
8356 <var_uinteger, var_zuinteger>: Use LONGEST for variable holding
8357 the result of parsing the command argument. Throw error if the
8358 value is greater than UINT_MAX. Print the invalid value with
8360 <var_integer, var_zinteger>: Use LONGEST for variable holding the
8361 result of parsing the command argument. Throw error if the value
8362 is greater than INT_MAX, not greater or equal. Also throw error
8363 if the value is less than INT_MIN. Print the invalid value with
8365 <var_zuinteger_unlimited>: Throw error if the value is greater
8366 than INT_MAX, not greater or equal.
8367 (do_show_command) <var_integer, var_zinteger,
8368 var_zuinteger_unlimited>: Use %d for printing int, not %u.
8370 2013-03-20 Tom Tromey <tromey@redhat.com>
8372 * ax-gdb.c (gen_var_ref): Unconditionally call via computed ops,
8374 * dwarf2read.c (read_func_scope): Remove old FIXME.
8375 * eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS,
8377 * findvar.c (symbol_read_needs_frame, default_read_var_value):
8378 Unconditionally call via computed ops, if possible.
8379 * printcmd.c (address_info): Unconditionally call via computed ops,
8381 * stack.c (read_frame_arg): Unconditionally call via computed ops,
8383 * symtab.c (register_symbol_computed_impl): Sanity check 'ops'.
8384 * tracepoint.c (scope_info): Unconditionally call via computed ops,
8387 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
8388 Tom Tromey <tromey@redhat.com>
8391 * coffread.c (coff_register_index): New global.
8392 (process_coff_symbol, coff_read_enum_type): Set
8393 SYMBOL_ACLASS_INDEX.
8394 (_initialize_coffread): Initialize new global.
8395 * dwarf2loc.c (locexpr_find_frame_base_location)
8396 (dwarf2_block_frame_base_locexpr_funcs)
8397 (loclist_find_frame_base_location)
8398 (dwarf2_block_frame_base_loclist_funcs): New.
8399 (dwarf_expr_frame_base_1): Call SYMBOL_BLOCK_OPS, remove internal_error.
8400 (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Add location_has_loclist.
8401 * dwarf2loc.h (dwarf2_block_frame_base_locexpr_funcs)
8402 (dwarf2_block_frame_base_loclist_funcs): New.
8403 * dwarf2read.c (dwarf2_locexpr_index, dwarf2_loclist_index)
8404 (dwarf2_locexpr_block_index, dwarf2_loclist_block_index): New
8406 (read_func_scope): Update.
8407 (fixup_go_packaging, mark_common_block_symbol_computed)
8408 (var_decode_location, new_symbol_full, dwarf2_const_value):
8409 Set SYMBOL_ACLASS_INDEX.
8410 (dwarf2_symbol_mark_computed): Likewise. Add 'is_block' argument.
8411 (_initialize_dwarf2_read): Initialize new globals.
8412 * jit.c (finalize_symtab): Set SYMBOL_ACLASS_INDEX.
8413 * jv-lang.c (add_class_symbol): Set SYMBOL_ACLASS_INDEX.
8414 * mdebugread.c (mdebug_register_index, mdebug_regparm_index): New
8416 (parse_symbol, psymtab_to_symtab_1): Set SYMBOL_ACLASS_INDEX.
8417 (_initialize_mdebugread): Initialize new globals.
8418 * psympriv.h (struct partial_symbol) <aclass>: Update comment.
8419 * stabsread.c (patch_block_stabs): Set SYMBOL_ACLASS_INDEX.
8420 (stab_register_index, stab_regparm_index): New globals.
8421 (define_symbol, read_enum_type, common_block_end): Set
8422 SYMBOL_ACLASS_INDEX.
8423 (_initialize_stabsread): Initialize new globals.
8424 * symtab.c (next_aclass_value, symbol_impl, symbol_impls): New
8426 (MAX_SYMBOL_IMPLS): New define.
8427 (register_symbol_computed_impl, register_symbol_block_impl)
8428 (register_symbol_register_impl)
8429 (initialize_ordinary_address_classes): New functions.
8430 (_initialize_symtab): Call initialize_ordinary_address_classes.
8431 * symtab.h (enum address_class) <LOC_FINAL_VALUE>: New constant.
8432 (struct symbol_impl): New.
8433 (SYMBOL_ACLASS_BITS): New define.
8434 (struct symbol) <aclass, ops>: Remove fields.
8435 <aclass_index>: New field.
8436 (symbol_impls): Declare.
8437 (SYMBOL_CLASS, SYMBOL_COMPUTED_OPS, SYMBOL_REGISTER_OPS): Redefine.
8438 (SYMBOL_IMPL, SYMBOL_ACLASS_INDEX): New defines.
8439 (register_symbol_computed_impl, register_symbol_block_impl)
8440 (register_symbol_register_impl): Declare.
8441 (struct symbol_computed_ops): Add location_has_loclist.
8442 (struct symbol_block_ops): New.
8443 (SYMBOL_BLOCK_OPS): New.
8444 * xcoffread.c (process_xcoff_symbol): Set SYMBOL_ACLASS_INDEX.
8446 2013-03-20 Tom Tromey <tromey@redhat.com>
8448 * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section)
8449 (print_partial_symbols, recursively_search_psymtabs): Use
8452 2013-03-20 Pierre Muller <muller@sourceware.org>
8454 * contrib/ari/gdb_ari.sh (OP eol rule): Also check
8455 addtion, subtraction, multiplication and division binary operator.
8457 2013-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
8460 * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
8461 * bsd-kvm.c (bsd_kvm_close): Likewise.
8462 * bsd-uthread.c (bsd_uthread_close): Likewise.
8463 * corelow.c (core_close): Likewise.
8464 (core_close_cleanup): Remove parameter quitting from a caller.
8465 * event-top.c (async_disconnect): Likewise.
8466 * exec.c (exec_close_1): Remove parameter quitting.
8467 * go32-nat.c (go32_close): Likewise.
8468 * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
8469 parameter quitting from a caller.
8470 * mips-linux-nat.c (super_close): Remove parameter quitting from the
8472 (mips_linux_close): Remove parameter quitting. Remove parameter
8473 quitting from a caller.
8474 * monitor.c (monitor_close): Remove parameter quitting.
8475 * monitor.h (monitor_close): Likewise.
8476 * record-btrace.c (record_btrace_close): Likewise.
8477 * record-full.c (record_full_close): Likewise.
8478 * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
8479 it also from fprintf_unfiltered.
8480 * remote-mips.c (mips_close): Remove parameter quitting.
8481 (mips_detach): Remove parameter quitting from a caller.
8482 * remote-sim.c (gdbsim_close): Remove parameter quitting.
8483 (gdbsim_close): Remove duplicate function comment. Remove parameter
8484 quitting and remove it also from printf_filtered.
8485 * remote.c (remote_close): Remove parameter quitting.
8486 * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
8487 * target.c (update_current_target): Remove parameter int from to_close
8489 (push_target, unpush_target, pop_target): Remove parameter quitting from
8491 (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
8492 Remove parameter quitting from a caller.
8493 (target_preopen): Remove parameter quitting from a caller.
8494 (target_close): Remove parameter quitting. Remove parameter quitting
8495 from a caller two times. Remove parameter quitting also from
8497 * target.h (struct target_ops): Remove parameter quitting and as int
8498 from fields to_xclose and to_close.
8499 (extern struct target_ops current_target):
8500 (target_close, pop_all_targets): Remove parameter quitting. Update the
8502 (pop_all_targets_above): Remove parameter quitting.
8503 * top.c (quit_target): Remove parameter quitting from a caller.
8504 * tracepoint.c (tfile_close): Remove parameter quitting.
8505 * windows-nat.c (windows_close): Remove parameter quitting.
8507 2013-03-20 Corinna Vinschen <vinschen@redhat.com>
8509 * windows-nat.c (handle_output_debug_string): Replace call
8510 to string_to_core_addr with call to strtoull.
8512 2013-03-20 Yao Qi <yao@codesourcery.com>
8514 * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
8515 and write it to CTF metadata.
8517 2013-03-19 Corinna Vinschen <vinschen@redhat.com>
8519 * windows-nat.c (handle_output_debug_string): Change type of n to
8520 SIZE_T to avoid crash on 64 bit systems.
8522 2013-03-17 Eli Zaretskii <eliz@gnu.org>
8524 * python/python-internal.h (HAVE_SNPRINTF)
8525 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
8526 about redefinition of snprintf by pyerrors.h.
8528 2013-03-15 Steve Ellcey <sellcey@mips.com>
8530 * remote-sim.c (sim_command_completer): Make char arguments const.
8532 2013-03-15 Tom Tromey <tromey@redhat.com>
8535 * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
8537 2013-03-14 Tom Tromey <tromey@redhat.com>
8539 * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
8541 (get_file_crc): Move from symfile.c.
8542 (gdb_bfd_crc): New function.
8543 * gdb_bfd.h (gdb_bfd_crc): Declare.
8544 * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
8545 * symfile.c (get_file_crc): Move to gdb_bfd.c.
8546 (separate_debug_file_exists): Use gdb_bfd_crc.
8548 2013-03-14 Tom Tromey <tromey@redhat.com>
8550 * symfile.c (get_debug_link_info): Remove.
8551 (find_separate_debug_file_by_debuglink): Use
8552 bfd_get_debug_link_info.
8554 2013-03-14 Tom Tromey <tromey@redhat.com>
8556 * symtab.c (error_in_psymtab_expansion): New function.
8557 (lookup_symbol_aux_quick)
8558 (basic_lookup_transparent_type_quick): Remove "last resort"
8559 code. Use error_in_psymtab_expansion.
8561 2013-03-14 Doug Evans <dje@google.com>
8562 Jan Kratochvil <jan.kratochvil@redhat.com>
8564 * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
8565 any successful compare_filenames_for_search or FILENAME_CMP.
8566 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
8567 * symtab.c (iterate_over_some_symtabs): Likewise.
8569 2013-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8571 * source.c (print_source_lines_base): Make a local copy of
8574 2013-03-14 Hui Zhu <hui_zhu@mentor.com>
8575 Jan Kratochvil <jan.kratochvil@redhat.com>
8577 * source.c (print_source_lines_base): Suppress "file" for TUI.
8579 2013-03-14 Keith Seitz <keiths@redhat.com>
8580 Alan Matsuoka <alanm@redhat.com>
8584 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
8586 * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
8589 2013-03-14 Yao Qi <yao@codesourcery.com>
8591 * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
8592 status to tfile if trace is stopped by command 'tstop'.
8594 2013-03-14 Yao Qi <yao@codesourcery.com>
8596 * tracepoint.c (tfile_write_status): Write trace notes and user
8597 name into tfile if they are not NULL.
8599 2013-03-14 Hui Zhu <hui@codesourcery.com>
8600 Yao Qi <yao@codesourcery.com>
8602 * Makefile.in (REMOTE_OBS): Add ctf.o.
8603 (SFILES): Add ctf.c.
8604 (HFILES_NO_SRCDIR): Add ctf.h.
8605 * ctf.c, ctf.h: New files.
8606 * tracepoint.c: Include 'ctf.h'.
8607 (collect_pseudocommand): Remove static.
8608 (trace_save_command): Parse option "-ctf".
8609 Produce different trace file writers per option.
8610 Adjust output message.
8611 (trace_save_tfile, trace_save_ctf): New.
8612 * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
8613 * mi/mi-main.c: Include 'ctf.h'.
8614 (mi_cmd_trace_save): Handle option '-ctf'. Call either
8615 trace_save_tfile or trace_save_ctf.
8616 * NEWS: Mention these changes.
8618 2013-03-14 Yao Qi <yao@codesourcery.com>
8620 * tracepoint.c (trace_file_writer_xfree): New.
8621 (struct tfile_writer_data): New.
8622 (tfile_dtor, tfile_can_target_save, tfile_start): New.
8623 (tfile_write_header, tfile_write_regblock_type): New.
8624 (tfile_write_status, tfile_write_uploaded_tsv): New.
8625 (tfile_write_uploaded_tp, tfile_write_definition_end): New.
8626 (tfile_write_raw_data, (tfile_end): New.
8627 (tfile_write_ops): New global variable.
8628 (TRACE_WRITE_R_BLOCK): New macro.
8629 (TRACE_WRITE_M_BLOCK_HEADER): New macro.
8630 (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
8631 (TRACE_WRITE_V_BLOCK): New macro.
8632 (trace_save): Add extra one parameter WRITER. Make it static.
8633 Use WRITER to writer trace.
8634 (tfile_trace_file_writer_new): New.
8635 (trace_save_command): Caller update.
8636 (trace_save_tfile): Write trace data in TFILE format.
8637 * tracepoint.h (struct trace_frame_write_ops): New.
8638 (struct trace_file_write_ops): New.
8639 (struct trace_file_writer): New.
8640 (trace_save): Remove its declaration.
8641 (trace_save_tfile): Declare it.
8642 * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
8643 instead of trace_save.
8645 2013-03-13 Pedro Alves <palves@redhat.com>
8647 * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
8649 2013-03-13 Pedro Alves <palves@redhat.com>
8651 * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
8653 * demangle.c (current_demangling_style_string): Make it const.
8654 (set_demangling_command): Assert the demangling style is known.
8655 Remove all handling of unknown styles. Set
8656 'current_demangling_style_string' to an element of the
8657 demangling_style_names array.
8658 (set_demangling_style): Delete.
8659 (_initialize_demangler): Set current_demangling_style_string to the
8660 element of the demangling_style_names array that corresponds to
8661 the default demangling style. Remove FIXME note. Don't call
8662 set_demangling_style.
8663 * gdb-demangle.h (set_demangling_style): Remove declaration.
8665 2013-03-13 Pedro Alves <palves@redhat.com>
8667 * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
8669 (ada_make_symbol_completion_list): Make "text0" parameter const.
8670 * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
8671 * breakpoint.c (condition_completer): Make "text" and "word"
8672 parameters const. Adjust.
8673 (check_tracepoint_command): Adjust to validate_actionline
8675 (catch_syscall_completer): Make "text" and "word" parameters
8677 * cli/cli-cmds.c (show_user): Make "comname" local const.
8678 (valid_command_p): Make "command" parameter const.
8679 (alias_command): Make "alias_prefix" and "command_prefix" locals
8681 * cli/cli-decode.c (add_cmd): Make "name" parameter const.
8682 (add_alias_cmd): Make "name" and "oldname" parameters const.
8683 Adjust. No longer make copy of OLDNAME.
8684 (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
8685 (add_setshow_cmd_full, add_setshow_enum_cmd)
8686 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
8687 (add_setshow_filename_cmd, add_setshow_string_cmd)
8688 (add_setshow_string_noescape_cmd)
8689 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
8690 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
8691 (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
8692 (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
8693 Make "name" parameter const.
8694 (help_cmd): Rename "command" parameter to "arg". New const local
8696 (find_cmd): Make "command" parameter const.
8697 (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
8698 deprecated_cmd_warning prototype change.
8699 (undef_cmd_error): Make "cmdtype" parameter const.
8700 (lookup_cmd): Make "line" parameter const.
8701 (deprecated_cmd_warning): Change type of "text" parameter to
8702 pointer to const char, from pointer to pointer to char. Adjust.
8703 (lookup_cmd_composition): Make "text" parameter const.
8704 (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
8706 * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
8708 * cli/cli-script.c (validate_comname): Make "tem" local const.
8709 (define_command): New const local "tem_c". Use it in calls to
8711 (document_command): Make "tem" and "comfull" locals const.
8712 (show_user_1): Make "prefix" and "name" parameters const.
8713 * cli-script.h (show_user_1): Make "prefix" and "name" parameters
8715 * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
8716 (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
8717 (deprecated_cmd_warning, lookup_cmd_composition, add_com)
8718 (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
8719 (complete_on_enum, add_setshow_enum_cmd)
8720 (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
8721 (add_setshow_filename_cmd, add_setshow_string_cmd)
8722 (add_setshow_string_noescape_cmd)
8723 (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
8724 (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
8725 (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
8726 Change prototypes, constifying strings.
8727 * completer.c (noop_completer, filename_completer): Make "text"
8728 and "prefix" parameters const.
8729 (location_completer, expression_completer)
8730 (complete_line_internal): Make "text" and "prefix" parameters
8732 (command_completer, signal_completer): Make "text" and "prefix"
8734 * completer.h (noop_completer, filename_completer)
8735 (expression_completer, location_completer, command_completer)
8736 (signal_completer): Change prototypes.
8737 * corefile.c (complete_set_gnutarget): Make "text" and "word"
8739 * cp-abi.c (cp_abi_completer): Likewise.
8740 * expression.h (parse_expression_for_completion): Change
8742 * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
8744 * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
8745 * infrun.c (handle_completer): Make "text" and "word" parameters
8747 * interps.c (interpreter_completer): Make "text" and "word"
8749 * language.h (struct language_defn)
8750 <la_make_symbol_completion_list>: Make "text" and "word"
8752 * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
8753 (parse_exp_in_context): Rename to ...
8754 (parse_exp_in_context_1): ... this.
8755 (parse_exp_in_context): Reimplement, with const hack from
8757 (parse_expression_for_completion): Make "string" parameter const.
8758 * printcmd.c (decode_format): Make "string_ptr" parameter pointer
8759 to pointer to const char. Adjust.
8760 (print_command_1): Make "exp" parameter const.
8761 (output_command): Rename to ...
8762 (output_command_const): ... this. Make "exp" parameter const.
8763 (output_command): Reimplement.
8764 (x_command): Adjust.
8765 (display_command): Rename "exp" parameter to "arg". New "exp"
8766 local, const version of "arg".
8767 * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
8768 "cmd_name" local const.
8769 * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
8771 (cmdpy_completer): Make "text" and "word" parameters const.
8772 (gdbpy_parse_command_name): Make "prefix_text2" local const.
8773 * python/py-param.c (add_setshow_generic): Make "tmp_name" local
8775 * remote.c (_initialize_remote): Make "cmd_name" local const.
8776 * symtab.c (language_search_unquoted_string): Make "text" and "p"
8777 parameters const. Adjust.
8778 (completion_list_add_fields): Make "sym_text", "text" and "word"
8780 (struct add_name_data) <sym_text, text, word>: Make fields const.
8781 (default_make_symbol_completion_list_break_on): Make "text" and
8782 "word" parameters const. Adjust locals.
8783 (default_make_symbol_completion_list)
8784 (make_symbol_completion_list, make_symbol_completion_type)
8785 (make_symbol_completion_list_fn): Make "text" and "word"
8787 (make_file_symbol_completion_list): Make "text", "word" and
8788 "srcfile" parameters const. Adjust locals.
8789 (add_filename_to_list): Make "text" and "word" parameters const.
8790 (struct add_partial_filename_data) <text, word>: Make fields
8792 (make_source_files_completion_list): Make "text" and "word"
8794 * symtab.h (default_make_symbol_completion_list_break_on)
8795 (default_make_symbol_completion_list, make_symbol_completion_list)
8796 (make_symbol_completion_type enum type_code)
8797 (make_symbol_completion_list_fn make_file_symbol_completion_list)
8798 (make_source_files_completion_list): Change prototype.
8799 * top.c (execute_command): Adjust to pass pointer to pointer to
8800 const char to lookup_cmd, and to deprecated_cmd_warning prototype
8802 (set_verbose): Make "cmdname" local const.
8803 * tracepoint.c (decode_agent_options): Make "exp" parameter const,
8805 (validate_actionline): Make "line" parameter a pointer to const
8807 (encode_actions_1): Make "action_exp" local const, and adjust.
8808 (encode_actions): Adjust.
8809 (replace_comma): Delete.
8810 (trace_dump_actions): Make "action_exp" and "next_comma" locals
8811 const, and adjust. Don't frob the action string while splitting
8812 it at commas. Instead, make a copy of each split substring in
8814 (trace_dump_command): Adjust to validate_actionline prototype
8816 * tracepoint.h (decode_agent_options, decode_agent_options)
8817 (encode_actions, validate_actionline): Change prototypes.
8818 * valprint.h (output_command): Delete declaration.
8819 (output_command_const): Declare.
8820 * value.c (function_destroyer): Cast const away in xfree call.
8822 2013-03-13 Pedro Alves <palves@redhat.com>
8824 * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
8825 rather than casting 'const char * const *' to 'const char **'.
8826 * ada-lex.l (processInt): Make "trailer" local const. Remove
8827 'const char **' cast.
8828 * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
8829 locals, and use those as strtol output pointer, instead than doing
8830 invalid casts to from 'const char **' to 'char **'.
8831 (_initialize_demangle): Remove cast.
8832 * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
8833 locals, and use those as strtol output pointer, instead than doing
8834 invalid casts to from 'const char **' to 'char **'.
8835 * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
8837 * stap-probe.c (stap_parse_register_operand)
8838 (stap_parse_single_operand): Likewise.
8840 2013-03-13 Yao Qi <yao@codesourcery.com>
8842 * tracepoint.c (tfile_get_trace_state_variable_value): Look for
8843 the last matched 'V' blcok in trace frame.
8845 2013-03-12 Joel Brobecker <brobecker@adacore.com>
8847 * NEWS: Create a new section for the next release branch.
8848 Rename the section of the current branch, now that it has
8851 2013-03-12 Joel Brobecker <brobecker@adacore.com>
8853 GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
8854 * version.in: Bump version to 7.6.50.20130312-cvs.
8856 2013-03-12 Keith Seitz <keiths@redhat.com>
8858 * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
8859 * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
8860 Remove temporary copy of input string.
8861 (mi_execute_command_wrapper): Make "cmd" const.
8862 * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
8863 * mi/mi-parse.c (mi_parse_argv): Make "args" const.
8865 (mi_parse): Make "cmd" const.
8867 * mi/mi-parse.h (mi_parse): Make "cmd" const.
8869 2013-03-12 Keith Seitz <keiths@redhat.com>
8871 * ada-lang.c (ada_read_renaming_var_value): Pass const
8872 pointer to expression string to parse_exp_1.
8873 (create_excep_cond_exprs): Likewise.
8874 * ax-gdb.c (agent_eval_command_one): Likewise.
8875 (maint_agent_printf_command): Likewise.
8876 Constify much of the string handling/parsing.
8877 * breakpoint.c (set_breakpoint_condition): Pass const
8878 pointer to expression string to parse_exp_1.
8879 (update_watchpoint): Likewise.
8880 (parse_cmd_to_aexpr): Constify string handling.
8881 Pass const pointer to parse_exp_1.
8882 (init_breakpoint_sal): Pass const pointer to parse_exp_1.
8883 (find_condition_and_thread): Likewise.
8885 (watch_command_1): Make "arg" const.
8886 Constify string handling.
8887 Copy the expression string instead of changing the input
8889 (update_breakpoint_location): Pass const pointer to
8891 * eval.c (parse_and_eval_address): Make "exp" const.
8892 (parse_to_comma_and_eval): Make "expp" const.
8893 (parse_and_eval): Make "exp" const.
8894 * expression.h (parse_expression): Make argument const.
8895 (parse_exp_1): Make first argument const.
8896 * findcmd.c (parse_find_args): Treat "args" as const.
8897 * linespec.c (parse_linespec): Pass const pointer to
8898 linespec_expression_to_pc.
8899 (linespec_expression_to_pc): Make "exp_ptr" const.
8900 * parse.c (parse_exp_1): Make "stringptr" const.
8901 Make a copy of the expression to pass to parse_exp_in_context until
8902 this whole interface can be constified.
8903 (parse_expression): Make "string" const.
8904 * printcmd.c (ui_printf): Treat "arg" as const.
8905 Handle const strings.
8906 * tracepoint.c (validate_actionline): Pass const pointer to
8907 all calls to parse_exp_1.
8908 (encode_actions_1): Likewise.
8909 * value.h (parse_to_comma_and_eval): Make argument const.
8910 (parse_and_eval_address): Likewise.
8911 (parse_and_eval): Likewise.
8912 * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
8913 (varobj_set_value): Likewise.
8914 * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
8915 constify string handling.
8916 Pass const pointers to parse_and_eval_address and
8917 parse_to_comman_and_eval.
8918 * cli/cli-utils.c (skip_to_space): Rename to ...
8919 (skip_to_space_const): ... this. Handle const strings.
8920 * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
8921 skip_to_space_const.
8922 (skip_to_space_const): Declare.
8923 * common/format.c (parse_format_string): Make "arg" const.
8924 Handle const strings.
8925 * common/format.h (parse_format_string): Make "arg" const.
8926 * gdbserver/ax.c (ax_printf): Make "format" const.
8927 * python/python.c (gdbpy_parse_and_eval): Do not make a copy
8928 of the expression string.
8930 2013-03-12 Hui Zhu <hui@codesourcery.com>
8932 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
8934 2013-03-12 Yao Qi <yao@codesourcery.com>
8935 Hui Zhu <hui@codesourcery.com>
8937 * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
8938 (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
8941 2013-03-12 Paul Hilfinger <hilfingr@adacore.com>
8943 * ada-lex.l (rules): Only recognize 'thread' as a
8944 delimiter when followed by numerals, as for c-exp.y.
8945 Use new rewind_to_char function to rewind the input for
8946 expression-delimiting tokens.
8947 (rewind_to_char): New function.
8949 2013-03-11 Pedro Alves <palves@redhat.com>
8950 Jan Kratochvil <jan.kratochvil@redhat.com>
8952 * configure: Regenerate.
8953 * configure.ac (check dynamic export flag): Link python test with
8956 2013-03-11 Doug Evans <dje@google.com>
8957 Keith Seitz <keiths@redhat.com>
8959 * linespec.c (find_linespec_symbols): Call find_function_symbols
8960 first, and then call lookup_prefix_sym/find_method.
8962 2013-03-11 Pedro Alves <palves@redhat.com>
8964 * charset.c (convert_between_encodings): Don't cast between
8965 different pointer to pointer types. Instead, make the 'inp' local
8966 be of the type iconv expects.
8967 (wchar_iterate): Don't cast between different pointer to pointer
8968 types. Instead, use new pointer local of the type iconv expects.
8969 * target.c (target_read_stralloc, target_fileio_read_stralloc):
8970 Add new local of type char pointer, and use it to get a
8971 char/string view of the byte buffer, instead of casting between
8972 pointer to pointer types.
8974 2013-03-11 Hafiz Abid Qadeer <abidh@codesourcery.com>
8976 * remote.c (remote_set_trace_buffer_size): Move != operator
8977 to the start of next line to fix an ARI warning.
8979 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8981 * NEWS: Add record changes.
8983 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8985 * record-btrace.c (btrace_insn_history): Omit the pc prefix in
8986 the instruction history disassembly.
8987 * disasm.c (dump_insns): Omit the pc prefix, if requested.
8988 * disasm.h (DISASSEMBLY_OMIT_PC): New.
8990 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
8992 * Makefile.in (SFILES): Add record-btrace.c
8993 (COMMON_OBS): Add record-btrace.o
8994 * record-btrace.c: New.
8995 * objfiles.c: Include btrace.h.
8996 (free_objfile): call btrace_free_objfile.
8998 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9000 * target.c (target_call_history, target_call_history_from,
9001 target_call_history_range): New.
9002 * target.h (target_ops) <to_call_history, to_call_history_from,
9003 to_call_history_range>: New fields.
9004 (target_call_history, target_call_history_from,
9005 target_call_history_range): New declaration.
9006 * record.c (get_call_history_modifiers, cmd_record_call_history,
9007 record_call_history_size): New.
9008 (_initialize_record): Add the "record function-call-history" command.
9009 Add "set/show record function-call-history-size" commands.
9010 * record.h (record_print_flag): New.
9012 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9014 * target.h (target_ops) <to_insn_history, to_insn_history_from,
9015 to_insn_history_range>: New fields.
9016 (target_insn_history): New.
9017 (target_insn_history_from): New.
9018 (target_insn_history_range): New.
9019 * target.c (target_insn_history): New.
9020 (target_insn_history_from): New.
9021 (target_insn_history_range): New.
9022 * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
9023 (record_insn_history_size): New.
9024 (get_insn_number): New.
9025 (get_context_size): New.
9027 (get_insn_history_modifiers): New.
9028 (cmd_record_insn_history): New.
9029 (_initialize_record): Add "set/show record instruction-history-size"
9030 command. Add "record instruction-history" command.
9032 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9034 * record.h (record_disconnect): New.
9035 (record_detach): New.
9036 (record_mourn_inferior): New.
9038 * record-full.c (record_disconnect, record_detach,
9039 record_mourn_inferior, record_kill): Move to...
9040 * record.c: ...here.
9043 (record_unpush): New.
9044 (cmd_record_stop): Call record_stop. Replace unpush_target
9045 call with record_unpush call.
9046 (record_disconnect, record_detach): Assert that the target
9047 is of record stratum. Call record_unpush, record_stop, and
9049 (record_mourn_inferior, record_kill): Assert that the target
9050 is of record stratum. Call record_unpush and DEBUG.
9052 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9054 * record-full.h, record-full.c (record_memory_query): Rename
9056 (record_full_memory_query): ...this. Update all users.
9057 (record_arch_list_add_reg): Rename to ...
9058 (record_full_arch_list_add_reg): ...this. Update all users.
9059 (record_arch_list_add_mem): Rename to ...
9060 (record_full_arch_list_add_mem): ...this. Update all users.
9061 (record_arch_list_add_end): Rename to ...
9062 (record_full_arch_list_add_end): ...this. Update all users.
9063 (record_gdb_operation_disable_set): Rename to ...
9064 (record_full_gdb_operation_disable_set): ...this.
9067 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9069 * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
9070 (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
9071 (RECORD_IS_REPLAY): Renamed to ...
9072 (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
9073 (RECORD_FILE_MAGIC): Renamed to ...
9074 (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
9075 (record_mem_entry): Renamed to ...
9076 (record_full_mem_entry): ... this. Updated all users.
9077 (record_reg_entry): Renamed to ...
9078 (record_full_reg_entry): ... this. Updated all users.
9079 (record_end_entry): Renamed to ...
9080 (record_full_end_entry): ... this. Updated all users.
9081 (record_type) <record_end, record_reg, record_mem>: Renamed
9083 (record_full_type) <record_full_end, record_full_reg,
9084 record_full_mem>: ... this. Updated all users.
9085 (record_entry): Renamed to ...
9086 (record_full_entry): ... this. Updated all users.
9087 (record_core_buf_entry): Renamed to ...
9088 (record_full_core_buf_entry): ... this. Updated all users.
9089 (record_core_regbuf): Renamed to ...
9090 (record_full_core_regbuf): ... this. Updated all users.
9091 (record_core_start): Renamed to ...
9092 (record_full_core_start): ... this. Updated all users.
9093 (record_core_end): Renamed to ...
9094 (record_full_core_end): ... this. Updated all users.
9095 (record_core_buf_list): Renamed to ...
9096 (record_full_core_buf_list): ... this. Updated all users.
9097 (record_first): Renamed to ...
9098 (record_full_first): ... this. Updated all users.
9099 (record_list): Renamed to ...
9100 (record_full_list): ... this. Updated all users.
9101 (record_arch_list_head): Renamed to ...
9102 (record_full_arch_list_head): ... this. Updated all users.
9103 (record_arch_list_tail): Renamed to ...
9104 (record_full_arch_list_tail): ... this. Updated all users.
9105 (record_stop_at_limit): Renamed to ...
9106 (record_full_stop_at_limit): ... this. Updated all users.
9107 (record_insn_max_num): Renamed to ...
9108 (record_full_insn_max_num): ... this. Updated all users.
9109 (record_insn_num): Renamed to ...
9110 (record_full_insn_num): ... this. Updated all users.
9111 (record_insn_count): Renamed to ...
9112 (record_full_insn_count): ... this. Updated all users.
9113 (record_ops): Renamed to ...
9114 (record_full_ops): ... this. Updated all users.
9115 (record_core_ops): Renamed to ...
9116 (record_full_core_ops): ... this. Updated all users.
9117 (set_record_cmdlist): Renamed to ...
9118 (set_record_full_cmdlist): ... this. Updated all users.
9119 (show_record_cmdlist): Renamed to ...
9120 (show_record_full_cmdlist): ... this. Updated all users.
9121 (record_cmdlist): Renamed to ...
9122 (record_full_cmdlist): ... this. Updated all users.
9123 (record_beneath_to_resume_ops): Renamed to ...
9124 (record_full_beneath_to_resume_ops): ... this. Updated all users.
9125 (record_beneath_to_resume): Renamed to ...
9126 (record_full_beneath_to_resume): ... this. Updated all users.
9127 (record_beneath_to_wait_ops): Renamed to ...
9128 (record_full_beneath_to_wait_ops): ... this. Updated all users.
9129 (record_beneath_to_wait): Renamed to ...
9130 (record_full_beneath_to_wait): ... this. Updated all users.
9131 (record_beneath_to_store_registers_ops): Renamed to ...
9132 (record_full_beneath_to_store_registers_ops): ... this.
9134 (record_beneath_to_store_registers): Renamed to ...
9135 (record_full_beneath_to_store_registers): ... this.
9137 (record_beneath_to_xfer_partial_ops): Renamed to ...
9138 (record_full_beneath_to_xfer_partial_ops): ... this.
9140 (record_beneath_to_xfer_partial): Renamed to ...
9141 (record_full_beneath_to_xfer_partial): ... this.
9143 (record_beneath_to_insert_breakpoint): Renamed to ...
9144 (record_full_beneath_to_insert_breakpoint): ... this.
9146 (record_beneath_to_stopped_by_watchpoint): Renamed to ...
9147 (record_full_beneath_to_stopped_by_watchpoint): ... this.
9149 (record_beneath_to_stopped_data_address): Renamed to ...
9150 (record_full_beneath_to_stopped_data_address): ... this.
9152 (record_beneath_to_async): Renamed to ...
9153 (record_full_beneath_to_async): ... this. Updated all users.
9154 (record_goto_insn): Renamed to ...
9155 (record_full_goto_insn): ... this. Updated all users.
9156 (record_save): Renamed to ...
9157 (record_full_save): ... this. Updated all users.
9158 (record_reg_alloc): Renamed to ...
9159 (record_full_reg_alloc): ... this. Updated all users.
9160 (record_reg_release): Renamed to ...
9161 (record_full_reg_release): ... this. Updated all users.
9162 (record_mem_alloc): Renamed to ...
9163 (record_full_mem_alloc): ... this. Updated all users.
9164 (record_mem_release): Renamed to ...
9165 (record_full_mem_release): ... this. Updated all users.
9166 (record_end_alloc): Renamed to ...
9167 (record_full_end_alloc): ... this. Updated all users.
9168 (record_end_release): Renamed to ...
9169 (record_full_end_release): ... this. Updated all users.
9170 (record_entry_release): Renamed to ...
9171 (record_full_entry_release): ... this. Updated all users.
9172 (record_list_release): Renamed to ...
9173 (record_full_list_release): ... this. Updated all users.
9174 (record_list_release_following): Renamed to ...
9175 (record_full_list_release_following): ... this.
9177 (record_list_release_first): Renamed to ...
9178 (record_full_list_release_first): ... this. Updated all users.
9179 (record_arch_list_add): Renamed to ...
9180 (record_full_arch_list_add): ... this. Updated all users.
9181 (record_get_loc): Renamed to ...
9182 (record_full_get_loc): ... this. Updated all users.
9183 (record_check_insn_num): Renamed to ...
9184 (record_full_check_insn_num): ... this. Updated all users.
9185 (record_arch_list_cleanups): Renamed to ...
9186 (record_full_arch_list_cleanups): ... this. Updated all users.
9187 (record_message): Renamed to ...
9188 (record_full_message): ... this. Updated all users.
9189 (record_message_wrapper): Renamed to ...
9190 (record_full_message_wrapper): ... this. Updated all users.
9191 (record_message_wrapper_safe): Renamed to ...
9192 (record_full_message_wrapper_safe): ... this. Updated all users.
9193 (record_gdb_operation_disable): Renamed to ...
9194 (record_full_gdb_operation_disable): ... this. Updated all users.
9195 (record_hw_watchpoint): Renamed to ...
9196 (record_full_hw_watchpoint): ... this. Updated all users.
9197 (record_exec_insn): Renamed to ...
9198 (record_full_exec_insn): ... this. Updated all users.
9199 (record_restore): Renamed to ...
9200 (record_full_restore): ... this. Updated all users.
9201 (record_async_inferior_event_token): Renamed to ...
9202 (record_full_async_inferior_event_token): ... this.
9204 (record_async_inferior_event_handler): Renamed to ...
9205 (record_full_async_inferior_event_handler): ... this.
9207 (record_core_open_1): Renamed to ...
9208 (record_full_core_open_1): ... this. Updated all users.
9209 (record_open_1): Renamed to ...
9210 (record_full_open_1): ... this. Updated all users.
9211 (record_open): Renamed to ...
9212 (record_full_open): ... this. Updated all users.
9213 (record_close): Renamed to ...
9214 (record_full_close): ... this. Updated all users.
9215 (record_resume_step): Renamed to ...
9216 (record_full_resume_step): ... this. Updated all users.
9217 (record_resumed): Renamed to ...
9218 (record_full_resumed): ... this. Updated all users.
9219 (record_execution_dir): Renamed to ...
9220 (record_full_execution_dir): ... this. Updated all users.
9221 (record_resume): Renamed to ...
9222 (record_full_resume): ... this. Updated all users.
9223 (record_get_sig): Renamed to ...
9224 (record_full_get_sig): ... this. Updated all users.
9225 (record_sig_handler): Renamed to ...
9226 (record_full_sig_handler): ... this. Updated all users.
9227 (record_wait_cleanups): Renamed to ...
9228 (record_full_wait_cleanups): ... this. Updated all users.
9229 (record_wait_1): Renamed to ...
9230 (record_full_wait_1): ... this. Updated all users.
9231 (record_wait): Renamed to ...
9232 (record_full_wait): ... this. Updated all users.
9233 (record_stopped_by_watchpoint): Renamed to ...
9234 (record_full_stopped_by_watchpoint): ... this. Updated all users.
9235 (record_disconnect): Renamed to ...
9236 (record_full_disconnect): ... this. Updated all users.
9237 (record_detach): Renamed to ...
9238 (record_full_detach): ... this. Updated all users.
9239 (record_mourn_inferior): Renamed to ...
9240 (record_full_mourn_inferior): ... this. Updated all users.
9241 (record_kill): Renamed to ...
9242 (record_full_kill): ... this. Updated all users.
9243 (record_stopped_data_address): Renamed to ...
9244 (record_full_stopped_data_address): ... this. Updated all users.
9245 (record_registers_change): Renamed to ...
9246 (record_full_registers_change): ... this. Updated all users.
9247 (record_store_registers): Renamed to ...
9248 (record_full_store_registers): ... this. Updated all users.
9249 (record_xfer_partial): Renamed to ...
9250 (record_full_xfer_partial): ... this. Updated all users.
9251 (record_breakpoint): Renamed to ...
9252 (record_full_breakpoint): ... this. Updated all users.
9253 (record_breakpoint_p): Renamed to ...
9254 (record_full_breakpoint_p): ... this. Updated all users.
9255 (record_breakpoints): Renamed to ...
9256 (record_full_breakpoints): ... this. Updated all users.
9257 (record_sync_record_breakpoints): Renamed to ...
9258 (record_full_sync_record_breakpoints): ... this.
9260 (record_init_record_breakpoints): Renamed to ...
9261 (record_full_init_record_breakpoints): ... this.
9263 (record_insert_breakpoint): Renamed to ...
9264 (record_full_insert_breakpoint): ... this. Updated all users.
9265 (record_remove_breakpoint): Renamed to ...
9266 (record_full_remove_breakpoint): ... this. Updated all users.
9267 (record_can_execute_reverse): Renamed to ...
9268 (record_full_can_execute_reverse): ... this. Updated all users.
9269 (record_get_bookmark): Renamed to ...
9270 (record_full_get_bookmark): ... this. Updated all users.
9271 (record_goto_bookmark): Renamed to ...
9272 (record_full_goto_bookmark): ... this. Updated all users.
9273 (record_async): Renamed to ...
9274 (record_full_async): ... this. Updated all users.
9275 (record_can_async_p): Renamed to ...
9276 (record_full_can_async_p): ... this. Updated all users.
9277 (record_is_async_p): Renamed to ...
9278 (record_full_is_async_p): ... this. Updated all users.
9279 (record_execution_direction): Renamed to ...
9280 (record_full_execution_direction): ... this. Updated all users.
9281 (record_info): Renamed to ...
9282 (record_full_info): ... this. Updated all users.
9283 (record_delete): Renamed to ...
9284 (record_full_delete): ... this. Updated all users.
9285 (record_is_replaying): Renamed to ...
9286 (record_full_is_replaying): ... this. Updated all users.
9287 (record_goto_entry): Renamed to ...
9288 (record_full_goto_entry): ... this. Updated all users.
9289 (record_goto_begin): Renamed to ...
9290 (record_full_goto_begin): ... this. Updated all users.
9291 (record_goto_end): Renamed to ...
9292 (record_full_goto_end): ... this. Updated all users.
9293 (record_goto): Renamed to ...
9294 (record_full_goto): ... this. Updated all users.
9295 (init_record_ops): Renamed to ...
9296 (init_record_full_ops): ... this. Updated all users.
9297 (record_core_resume): Renamed to ...
9298 (record_full_core_resume): ... this. Updated all users.
9299 (record_core_kill): Renamed to ...
9300 (record_full_core_kill): ... this. Updated all users.
9301 (record_core_fetch_registers): Renamed to ...
9302 (record_full_core_fetch_registers): ... this. Updated all users.
9303 (record_core_prepare_to_store): Renamed to ...
9304 (record_full_core_prepare_to_store): ... this. Updated all users.
9305 (record_core_store_registers): Renamed to ...
9306 (record_full_core_store_registers): ... this. Updated all users.
9307 (record_core_xfer_partial): Renamed to ...
9308 (record_full_core_xfer_partial): ... this. Updated all users.
9309 (record_core_insert_breakpoint): Renamed to ...
9310 (record_full_core_insert_breakpoint): ... this. Updated all users.
9311 (record_core_remove_breakpoint): Renamed to ...
9312 (record_full_core_remove_breakpoint): ... this. Updated all users.
9313 (record_core_has_execution): Renamed to ...
9314 (record_full_core_has_execution): ... this. Updated all users.
9315 (init_record_core_ops): Renamed to ...
9316 (init_record_full_core_ops): ... this. Updated all users.
9317 (cmd_record_restore): Renamed to ...
9318 (cmd_record_full_restore): ... this. Updated all users.
9319 (record_save_cleanups): Renamed to ...
9320 (record_full_save_cleanups): ... this. Updated all users.
9321 (cmd_record_start): Renamed to ...
9322 (cmd_record_full_start): ... this. Updated all users.
9323 (set_record_insn_max_num): Renamed to ...
9324 (set_record_full_insn_max_num): ... this. Updated all users.
9325 (set_record_command): Renamed to ...
9326 (set_record_full_command): ... this. Updated all users.
9327 (show_record_command): Renamed to ...
9328 (show_record_full_command): ... this. Updated all users.
9329 (_initialize_record): Renamed to ...
9330 (_initialize_record_full): ... this. Updated all users.
9332 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9334 * record.h: Split into this and ...
9335 * record-full.h: ... this.
9336 * record.c: Split into this and ...
9337 * record-full.c: ... this.
9338 * target.h (target_ops): Add new fields to_info_record,
9339 to_save_record, to_delete_record, to_record_is_replaying,
9340 to_goto_record_begin, to_goto_record_end, to_goto_record.
9341 (target_info_record): New.
9342 (target_save_record): New.
9343 (target_supports_delete_record): New.
9344 (target_delete_record): New.
9345 (target_record_is_replaying): New.
9346 (target_goto_record_begin): New.
9347 (target_goto_record_end): New.
9348 (target_goto_record): New.
9349 * target.c (target_info_record): New.
9350 (target_save_record): New.
9351 (target_supports_delete_record): New.
9352 (target_delete_record): New.
9353 (target_record_is_replaying): New.
9354 (target_goto_record_begin): New.
9355 (target_goto_record_end): New.
9356 (target_goto_record): New.
9357 * record.h: Declare struct cmd_list_element.
9358 (record_cmdlist): New declaration.
9359 (set_record_cmdlist): New declaration.
9360 (show_record_cmdlist): New declaration.
9361 (info_record_cmdlist): New declaration.
9362 (cmd_record_goto): New declaration.
9363 * record.c: Remove unnecessary includes.
9365 (cmd_record_goto): Remove declaration.
9366 (record_cmdlist): Now extern. Initialize.
9367 (set_record_cmdlist): Now extern. Initialize.
9368 (show_record_cmdlist): Now extern. Initialize.
9369 (info_record_cmdlist): Now extern. Initialize.
9370 (find_record_target): New.
9371 (require_record_target): New.
9372 (cmd_record_start): Update.
9373 (cmd_record_delete): Remove target-specific code.
9374 Call target_delete_record.
9375 (cmd_record_stop): Unpush any record target.
9376 (set_record_insn_max_num): Move to record-full.c
9377 (set_record_command): Add comment.
9378 (show_record_command): Add comment.
9379 (info_record_command): Update comment.
9380 Remove target-specific code.
9381 Call the record target's to_info_record.
9382 (cmd_record_start): New.
9383 (cmd_record_goto): Now extern.
9384 Remove target-specific code.
9385 Call target_goto_begin, target_goto_end, or target_goto.
9386 (_initialize_record): Move record target ops initialization to
9388 Change "record" command help text.
9389 Move "record restore", "record set", and "record show" commands to
9391 * Makefile.in (SFILES): Add record-full.c.
9392 (HFILES_NO_SRCDIR): Add record-full.h.
9393 (COMMON_OBS): Add record-full.o.
9394 * amd64-linux-tdep.c: Include record-full.h instead of record.h.
9395 * arm-tdep.c: Include record-full.h.
9396 * i386-linux-tdep.c: Include record-full.h instead of record.h.
9397 * i386-tdep.c: Include record-full.h.
9398 * infrun.c: Include record-full.h.
9399 * linux-record.c: Include record-full.h.
9400 * moxie-tdep.c: Include record-full.h.
9401 * record-full.c: Include record-full.h.
9402 Change module comment.
9403 (set_record_full_cmdlist): New.
9404 (show_record_full_cmdlist): New.
9405 (record_full_cmdlist): New.
9406 (record_goto_insn): New declaration.
9407 (record_save): New declaration.
9408 (record_check_insn_num): Change query string.
9410 (record_delete): New.
9411 (record_is_replaying): New.
9412 (record_goto_entry): New.
9413 (record_goto_begin): New.
9414 (record_goto_end): New.
9416 (init_record_ops): Update.
9417 (init_record_core_ops): Update.
9418 (cmd_record_save): Rename to record_save. Remove target and arg checks.
9419 (cmd_record_start): New.
9420 (set_record_insn_max_num): Moved from record.c
9421 (set_record_full_command): New.
9422 (show_record_full_command): New.
9423 (_initialize_record_full): New.
9425 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9427 * target.h (add_deprecated_target_alias): New.
9428 * target.c (add_deprecated_target_alias): New.
9430 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9432 * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
9434 (linux_supports_btrace): Add kernel and
9436 (kernel_supports_btrace): New function.
9437 (cpu_supports_btrace): New function.
9438 (intel_supports_btrace): New function.
9440 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9442 * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
9443 * remote.c: Include btrace.h.
9444 (struct btrace_target_info): New struct.
9445 (remote_supports_btrace): New function.
9446 (send_Qbtrace): New function.
9447 (remote_enable_btrace): New function.
9448 (remote_disable_btrace): New function.
9449 (remote_teardown_btrace): New function.
9450 (remote_read_btrace): New function.
9451 (init_remote_ops): Add btrace ops.
9452 (enum <unnamed>): Add btrace packets.
9453 (struct protocol_feature remote_protocol_features[]): Add btrace packets.
9454 (_initialize_remote): Add packet configuration for branch tracing.
9456 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9458 * features/btrace.dtd: New file.
9459 * Makefile.in (XMLFILES): Add btrace.dtd.
9460 * btrace.h (parse_xml_btrace): New declaration.
9461 * btrace.c: Include xml-support.h.
9462 (parse_xml_btrace): New function.
9463 (parse_xml_btrace_block): New function.
9464 (block_attributes): New struct.
9465 (btrace_attributes): New struct.
9466 (btrace_children): New struct.
9467 (btrace_elements): New struct.
9469 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9471 * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
9472 (amd64_linux_enable_btrace): New.
9473 (amd64_linux_disable_btrace): New.
9474 (amd64_linux_teardown_btrace): New.
9475 (_initialize_amd64_linux_nat): Initialize btrace ops.
9476 * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
9477 (i386_linux_enable_btrace): New.
9478 (i386_linux_disable_btrace): New.
9479 (i386_linux_teardown_btrace): New.
9480 (_initialize_i386_linux_nat): Initialize btrace ops.
9481 * config/i386/linux.mh: Add linux-btrace.o.
9482 * config/i386/linux64.mh: Add linux-btrace.o.
9484 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9486 * common/linux_btrace.h: New file.
9487 * common/linux_btrace.c: New file.
9488 * Makefile.in (SFILES): Add btrace.c.
9489 (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
9490 (COMMON_OBS): Add btrace.o.
9491 (linux-btrace.o): New rule.
9493 2013-03-11 Markus Metzger <markus.t.metzger@intel.com>
9495 * target.h: Include btrace.h.
9496 (struct target_ops) <to_supports_btrace, to_enable_btrace,
9497 to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
9498 * target.c (target_supports_btrace): New function.
9499 (target_enable_btrace): New function.
9500 (target_disable_btrace): New function.
9501 (target_teardown_btrace): New function.
9502 (target_read_btrace): New function.
9503 * btrace.h: New file.
9504 * btrace.c: New file.
9505 * Makefile.in: Add btrace.c.
9506 * gdbthread.h: Include btrace.h.
9507 (struct thread_info): Add btrace field.
9508 * thread.c: Include btrace.h.
9509 (clear_thread_inferior_resources): Call target_teardown_btrace.
9510 * common/btrace-common.h: New file.
9512 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
9514 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
9515 for CHILD, ignore PTRACE_KILL errors, move the inner block variable
9516 kill_status to outer block.
9518 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
9520 Fix entry-values if the callee called a noreturn function.
9521 * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
9522 get_frame_address_in_block. Add new comment.
9524 2013-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
9526 Fix entry-values in C++ across CUs.
9527 * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
9528 lookup_minimal_symbol. Add a comment.
9530 (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
9533 2013-03-08 Yao Qi <yao@codesourcery.com>
9535 * tracepoint.c (_initialize_tracepoint): Indent the code.
9537 2013-03-08 Pedro Alves <palves@redhat.com>
9539 * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
9540 (parse_find_args, find_command): Change type of pattern buffer
9541 locals to 'gdb_byte *'.
9543 2013-03-08 Stan Shebs <stan@codesourcery.com>
9544 Hafiz Abid Qadeer <abidh@codesourcery.com>
9546 * NEWS: Mention set and show trace-buffer-size commands.
9548 * target.h (struct target_ops): New method
9549 to_set_trace_buffer_size.
9550 (target_set_trace_buffer_size): New macro.
9551 * target.c (update_current_target): Set up new method.
9552 * tracepoint.c (trace_buffer_size): New global.
9553 (start_tracing): Send it to the target.
9554 (set_trace_buffer_size): New function.
9555 (_initialize_tracepoint): Add new setshow for trace-buffer-size.
9556 * remote.c (remote_set_trace_buffer_size): New function.
9557 (_initialize_remote): Use it.
9558 (QTBuffer:size) New remote command.
9559 (PACKET_QTBuffer_size): New enum.
9560 (remote_protocol_features): Add an entry for
9561 PACKET_QTBuffer_size.
9563 2013-03-08 Tom Tromey <tromey@redhat.com>
9565 * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
9568 2013-03-07 Pedro Alves <palves@redhat.com>
9570 * target.c (target_read_stralloc, target_fileio_read_alloc):
9571 *Cast pointer to 'gdb_byte *' in target call.
9573 2013-03-07 Pedro Alves <palves@redhat.com>
9575 * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
9578 2013-03-07 Keith Seitz <keiths@redhat.com>
9580 * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
9581 (trace_pass_command): Likewise.
9582 * cli/cli-cmds.c: Include cli/cli-utils.h.
9583 (source_command): Use skip-spaces.
9584 (disassemble_command): Likewise.
9585 * findcmd.c: Include cli/cli-utils.h.
9586 (parse_find_args): Use skip_spaces.
9587 * go32-nat.c: Include cli/cli-utils.h.
9588 (go32_sldt): Use skip_spaces.
9589 (go32_sgdt): Likewise.
9590 (go32_sidt): Likewise.
9591 (go32_pde): Likewise.
9592 (go32_pte): Likewise.
9593 (go32_pte_for_address): Likewise.
9594 * infcmd.c: Include cli/cli-utils.h.
9595 (registers_info): Use skip_spaces.
9596 * linux-tdep.c (read_mapping): Use skip_spaces_const.
9597 (linux_info_proc): Likewise.
9598 * linux-thread-db.c: Include cli/cli-utils.h.
9599 (info_auto_load_libthread_db): Use skip_spaces_const.
9600 * m32r-rom.c: Include cli/cli-utils.h.
9601 (m32r_upload_command): Use skip_spaces.
9602 * maint.c: Include cli/cli-utils.h.
9603 (maintenance_translate_address): Use skip_spaces.
9604 * mi/mi-parse.c: Include cli/cli-utils.h.
9605 (mi_parse_argv): Use skip_spaces.
9606 (mi_parse): Likewise.
9607 * minsyms.c: Include cli/cli-utils.h.
9608 (msymbol_hash_iw): Use skip_spaces_const.
9609 * objc-lang.c: Include cli/cli-utils.h.
9610 (parse_selector): Use skip_spaces.
9611 (parse_method): Likewise.
9612 * python/python.c: Include cli/cli-utils.h.
9613 (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
9614 (python_command)[HAVE_PYTHON]: Likewise.
9615 (python_interactive_command)[!HAVE_PYTHON]: Likewise.
9616 * remote-m32r-sdi.c: Include cli/cli-utils.h.
9617 (m32r_load): Use skip_spaces.
9618 * serial.c: Include cli/cli-utils.h.
9619 (serial_open): Use skip_spaces_const.
9620 * stack.c: Include cli/cli-utils.h.
9621 (parse_frame_specification_1): Use skip_spaces_const.
9622 * symfile.c: Include cli/cli-utils.h.
9623 (set_ext_lang_command): Use skip_spaces.
9624 * symtab.c: Include cli/cli-utils.h.
9625 (rbreak_command): Use skip_spaces.
9626 * thread.c (thread_name_command): Use skip_spaces.
9627 * tracepoint.c (validate_actionline): Use skip_spaces.
9628 (encode_actions_1): Likewise.
9629 (trace_find_range_command): Likewise.
9630 (trace_find_outside_command): Likewise.
9631 (trace_dump_actions): Likewise.
9633 2013-03-07 Pedro Alves <palves@redhat.com>
9635 * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
9636 * expprint.c (print_subexp_standard): Likewise.
9637 * utils.c (host_char_to_target): Likewise.
9638 * valprint.c (generic_emit_char, generic_printstr): Likewise.
9639 * varobj.c (value_get_print_value): Change type of local to char*.
9640 Cast it gdb_byte * in call to language printer.
9642 2013-03-07 Pedro Alves <palves@redhat.com>
9644 * charset.c (struct wchar_iterator) <input>: Change type to 'const
9646 (make_wchar_iterator): Remove cast to char*.
9647 (wchar_iterate): Change type of local.
9649 2013-03-07 Pedro Alves <palves@redhat.com>
9651 * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
9652 for 'regcache->register_status'.
9654 2013-03-07 Pedro Alves <palves@redhat.com>
9656 * breakpoint.c (breakpoint_xfer_memory): Change type of local to
9659 2013-03-07 Pedro Alves <palves@redhat.com>
9661 * stap-probe.c (handle_stap_probe): Add cast to char*.
9663 2013-03-07 Pedro Alves <palves@redhat.com>
9665 * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
9666 RECORD_MSGRCV>: Pass a signed variable to
9667 regcache_raw_read_signed, instead of an unsigned one.
9669 2013-03-07 Pedro Alves <palves@redhat.com>
9671 * remote-notif.c (notif_debug): Change type to int.
9672 * remote-notif.h (notif_debug): Likewise.
9674 2013-03-07 Pedro Alves <palves@redhat.com>
9676 * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
9678 2013-03-07 Pedro Alves <palves@redhat.com>
9680 * remote.c (hex2bin, bin2hex): Move extern declarations to ...
9681 * remote.h (hex2bin, bin2hex): ... here.
9682 * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
9684 2013-03-07 Eli Zaretskii <eliz@gnu.org>
9686 * utils.c (initialize_utils): Improve doc strings of "set/show
9687 width", "set/show height", and "set/show pagination".
9689 2013-03-06 Keith Seitz <keiths@redhat.com>
9691 * ax-gdb.c (gen_printf): Make FORMAT const.
9692 * ax-gdb.h (gen_printf): Likewise.
9693 * ax-general.c (ax_string): Make STR const.
9694 * ax.h (ax_string): Likewise.
9696 2013-03-06 Doug Evans <dje@google.com>
9698 * elfread.c (elf_symfile_read): Move debugging printf to more
9701 2013-03-06 Pedro Alves <palves@redhat.com>
9703 * python/py-utils.c (target_string_to_unicode): Delete function.
9704 * python/python-internal.h (target_string_to_unicode): Delete
9707 2013-03-06 Pierre Muller <muller@sourceware.org>
9709 * linespec.c (get_current_search_block): ARI fix, use (void)
9710 for empty parameter list.
9712 2013-03-05 Doug Evans <dje@google.com>
9714 * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
9715 of old ada_lookup_symbol_list. In !full_search case, don't
9717 (ada_lookup_symbol_list): Delete arg full_search, all callers
9718 updated. Call ada_lookup_symbol_list_worker.
9719 (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
9720 * ada-lang.h (ada_lookup_symbol_list): Update.
9721 * language.h (language_defn): Update comment for
9722 la_iterate_over_symbols.
9723 * linespec.c (iterate_over_file_blocks): New function.
9724 (iterate_over_all_matching_symtabs): Call it.
9725 (lookup_prefix_sym): Ditto.
9726 (get_current_search_block): New function.
9727 (get_search_block): Delete.
9728 (find_label_symbols): Call get_current_search_block.
9729 (add_matching_symbols_to_info): Call iterate_over_file_blocks.
9730 * symtab.c (iterate_over_symbols): Don't search superblocks.
9732 2013-03-05 Yao Qi <yao@codesourcery.com>
9734 * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
9735 parameter VAR's type from "unsigned int" to "int".
9736 * command.h (var_zuinteger_unlimited): Update its comments.
9737 (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
9739 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
9741 * NEWS: Mention new target x86_64-*-cygwin*.
9743 2013-03-05 Corinna Vinschen <vinschen@redhat.de>
9745 * configure.host: Add x86_64-*-cygwin* as host.
9746 * configure.tgt: Add x86_64-*-cygwin* as target.
9747 * config/i386/cygwin64.mh: New file.
9749 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
9751 * linespec.c (decode_line_2): Fix duplicate request off by two message.
9753 2013-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
9755 * linespec.c (struct linespec_canonical_name): New.
9756 (struct linespec_state): Change canonical_names type to it.
9757 (add_sal_to_sals): Change variable canonical_name to canonical. Change
9758 xrealloc element size. Initialize the different CANONICAL fields.
9759 (canonical_to_fullform): New.
9760 (filter_results): Use it. Add variables canonical, fullform and
9762 (struct decode_line_2_item, decode_line_2_compare_items): New.
9763 (decode_line_2): Remove variables iter and item_names, add variables
9764 items and items_count. Modify the code for these new variables.
9766 2013-03-04 Corinna Vinschen <vinschen@redhat.com>
9768 * coff-pe-read.c (read_pe_exported_syms): Don't return without
9771 2013-03-04 Luis Machado <lgustavo@codesourcery.com>
9773 * tracepoint.c (build_traceframe_info): Add code for byte order.
9775 2013-03-02 Kevin Buettner <kevinb@redhat.com>
9777 * v850-tdep.c: (v850e2_register_name): Revise system register
9778 names to match current V850E2M architecture specifications.
9779 Update register number enum comments too.
9781 2013-03-01 Jiong Wang <jiwang@tilera.com>
9782 Pedro Alves <palves@redhat.com>
9784 * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
9786 (tilegx_skip_prologue): Limit prologue analysis to section end.
9788 2013-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
9790 * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
9793 2013-03-01 Pedro Alves <palves@redhat.com>
9795 Use gdb_byte for bytes from the program being debugged.
9797 * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
9798 Change type of local 'buf' to gdb_byte.
9799 * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
9800 * bfin-tdep.c (bfin_push_dummy_call): Likewise.
9801 * cris-tdep.c (cris_sigcontext_addr)
9802 (cris_sigtramp_frame_unwind_cache): Likewise.
9803 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
9804 (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
9806 * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
9807 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
9808 (hppa32_hpux_search_dummy_call_sequence)
9809 (hppa_hpux_supply_save_state): Likewise.
9810 * hppa-linux-tdep.c (insns_match_pattern)
9811 (hppa_linux_find_global_pointer): Likewise.
9812 * hppa-tdep.c (hppa_in_function_epilogue_p)
9813 (skip_prologue_hard_way, hppa_frame_cache): Likewise.
9814 * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
9815 * i386fbsd-tdep.c (i386fbsd_supply_uthread)
9816 (i386fbsd_collect_uthread): Likewise.
9817 * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
9818 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
9819 * ia64-tdep.c (examine_prologue, ia64_frame_cache)
9820 (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
9821 (ia64_sigtramp_frame_prev_register, ia64_access_reg)
9822 (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
9823 (ia64_libunwind_frame_prev_register)
9824 (ia64_libunwind_sigtramp_frame_this_id)
9825 (ia64_find_global_pointer_from_dynamic_section)
9826 (find_extant_func_descr, find_func_descr, ia64_dummy_id)
9827 (ia64_unwind_pc): Likewise.
9828 * iq2000-tdep.c (iq2000_store_return_value): Likewise.
9829 * m68hc11-tdep.c (m68hc11_push_dummy_call)
9830 (m68hc11_extract_return_value): Likewise.
9831 * m68klinux-nat.c (fetch_register, store_register): Likewise.
9832 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
9833 (mep_get_insn, mep_push_dummy_call): Likewise.
9834 * mips-linux-tdep.c (mips_linux_get_longjmp_target)
9835 (mips_linux_in_dynsym_stub): Likewise.
9836 * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
9837 * ppc-linux-nat.c (fetch_register, store_register): Likewise.
9838 * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
9840 * remote-mips.c (mips_set_register): Likewise.
9841 * remote-sim.c (gdbsim_fetch_register): Likewise.
9842 * score-tdep.c (score7_fetch_inst): Change type of parameter
9843 'memblock' and local 'buf' to gdb_byte.
9844 (score7_malloc_and_get_memblock): Change return type to gdb_byte.
9845 Change type of local 'buf' to gdb_byte. Adjust.
9846 (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
9848 (score7_analyze_prologue): Change type of 'memblock' and
9849 'memblock_ptr' locals to gdb_byte*.
9850 * sh64-tdep.c (sh64_extract_return_value)
9851 (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
9852 * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
9853 * solib-pa64.c (pa64_solib_create_inferior_hook)
9854 (pa64_open_symbol_file_object): Remove local 'buf'.
9855 * solib-som.c (som_solib_create_inferior_hook, link_map_start)
9856 (som_open_symbol_file_object): Likewise.
9857 * solib-spu.c (spu_current_sos): Likewise.
9858 * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
9859 * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
9860 (spu_store_registers): Likewise.
9861 * target.c (debug_print_register): Likewise.
9862 * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
9863 * xstormy16-tdep.c (xstormy16_store_return_value)
9864 (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
9865 (xstormy16_find_jmp_table_entry): Likewise.
9867 2013-03-01 Jiong Wang <jiwang@tilera.com>
9869 * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
9870 (tilegx_gdbarch_init): Install it.
9872 2013-02-28 Tom Tromey <tromey@redhat.com>
9874 * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
9877 2013-02-28 Doug Evans <dje@google.com>
9879 * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
9880 * python/python.c (gdbpy_find_pc_line): Ditto.
9882 2013-02-28 Tom Tromey <tromey@redhat.com>
9884 * contrib/excheck.py: New file.
9885 * contrib/exsummary.py: New file.
9886 * contrib/gcc-with-excheck: New file.
9888 2013-02-28 Tom Tromey <tromey@redhat.com>
9890 * python/python.c (gdbpy_print_stack): Call begin_line and
9891 fprintf_filtered inside TRY_CATCH.
9893 2013-02-28 Tom Tromey <tromey@redhat.com>
9895 * python/python.c (gdbpy_find_pc_line): Call find_pc_line
9898 2013-02-28 Tom Tromey <tromey@redhat.com>
9900 * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
9901 frame_object_to_frame_info inside TRY_CATCH.
9903 2013-02-28 Tom Tromey <tromey@redhat.com>
9905 * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
9908 2013-02-28 Tom Tromey <tromey@redhat.com>
9910 * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
9912 2013-02-27 Corinna Vinschen <vinschen@redhat.com>
9914 * windows-nat.c: Throughout, fix format strings and casts of
9915 printf-like functions to avoid type related warnings on all
9917 (handle_output_debug_string): Fetch context information address
9918 from debug string using string_to_core_addr.
9920 2013-02-27 Jiong Wang <jiwang@tilera.com>
9922 * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
9923 * regformats/reg-tilegx32.dat: New.
9925 2013-02-27 Jiong Wang <jiwang@tilera.com>
9927 * configure.tgt (tilegx-*-linux*): Enable gdbserver.
9929 2013-02-27 Jiong Wang <jiwang@tilera.com>
9931 * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
9933 2013-02-27 Yao Qi <yao@codesourcery.com>
9934 Pedro Alves <palves@redhat.com>
9936 * tracepoint.c (tfile_trace_find): For tfind
9937 pc/tp/range/outside, look for the next trace frame instead of
9938 always starting from frame 0.
9940 2013-02-26 Anthony Green <green@moxielogic.com>
9942 * configure.tgt: Add support for moxie-*-rtems* target.
9944 2013-02-25 Pedro Alves <palves@redhat.com>
9946 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
9949 2013-02-24 Maciej W. Rozycki <macro@codesourcery.com>
9951 * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
9952 if $fp is used as the virtual frame pointer.
9954 2013-02-23 Alan Modra <amodra@gmail.com>
9956 * elfread.c (elf_symtab_read): Do not use udata.p here to find
9958 * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
9959 * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
9960 * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
9961 * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
9963 2013-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9966 * elfread.c (build_id_bfd_get): Make the return type const.
9967 (build_id_verify): Make the check parameter const.
9968 (build_id_to_debug_filename): Make the build_id parameter and variable
9970 (find_separate_debug_file_by_buildid): Make the variable build_id const.
9972 2013-02-21 Alan Modra <amodra@gmail.com>
9974 * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
9976 2013-02-20 Siva Chandra Reddy <sivachandra@google.com>
9978 Add a new method 'disassemble' to gdb.Architecture class.
9979 * python/py-arch.c (archpy_disassmble): Implementation of the
9980 new method gdb.Architecture.disassemble.
9981 (arch_object_methods): Add entry for the new method.
9983 2013-02-20 Jiong Wang <jiwang@tilera.com>
9985 * MAINTAINERS (Write After Approval): Add myself to the list.
9987 2013-02-19 Pedro Alves <palves@redhat.com>
9989 Garbage collect 'struct monitor_ops'::load_routine.
9991 * monitor.h (struct monitor_ops) <load_routine>: Remove field.
9992 * monitor.c (monitor_load): No longer call
9993 current_monitor->load_routine.
9994 * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
9995 * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
9996 * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
9998 2013-02-19 Pedro Alves <palves@redhat.com>
10002 Harmonize with generic_load.
10004 * monitor.c: Include "readline/readline.h".
10005 (monitor_load): Rename parameter 'file' to 'args'. Use build_argv
10006 instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
10007 long/strtol for the 'load_offset' local. Error out if no argument
10008 is given or if too many arguments are given. Tilde expand the
10009 passed in file name.
10011 2013-02-19 Kai Tietz <ktietz@redhat.com>
10014 * symfile.c (load_section_data): Change type of load_offset
10016 (generic_load): User strtoulst instead of strtoul for conversion
10019 2013-02-19 Jiong Wang <jiwang@tilera.com>
10021 * tilegx-tdep.c (tilegx_analyze_prologue): add check for
10022 for return address, "lr" register, saved on stack.
10023 * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
10024 after we invoke tilegx_analyze_prologue.
10026 2013-02-19 Jiong Wang <jiwang@tilera.com>
10028 * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
10030 2013-02-19 Jiong Wang <jiwang@tilera.com>
10032 * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
10034 2013-02-19 Jiong Wang <jiwang@tilera.com>
10036 * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
10037 (tilegx_write_pc): New function.
10038 (tilegx_cannot_reference_register): Return zero if REGNO
10039 is TILEGX_FAULTNUM_REGNUM.
10040 (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
10041 (tilegx_register_name): Add handling of "faultnum" register.
10042 * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
10043 * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
10044 handling of TILEGX_FAULTNUM_REGNUM.
10045 * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
10047 2013-02-19 Jiong Wang <jiwang@tilera.com>
10049 * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
10050 should be aligned to 64bit.
10052 2013-02-19 Kai Tietz <ktietz@redhat.com>
10054 * windows-nat.c (windows_xfer_memory): Fix debug-output
10057 2013-02-19 Lei Liu <lei.liu2@windriver.com>
10059 * mips-linux-nat.c (mips64_linux_regsets_store_registers):
10060 Don't check DSP register number if HAVE_DSP is not set.
10062 2013-02-19 Alan Modra <amodra@gmail.com>
10064 * elfread.c (struct build_id): Delete. Use struct elf_build_id
10065 throughout file instead.
10066 (build_id_bfd_get): Update to use new elf_tdata build_id field.
10067 Don't xmalloc return value.
10068 (build_id_verify): Similarly. Don't xfree.
10069 (build_id_to_debug_filename): Update.
10070 (find_separate_debug_file_by_buildid): Update, don't xfree.
10072 2013-02-18 Tom Tromey <tromey@redhat.com>
10075 * dwarf2read.c (read_subrange_type): Use result of
10078 2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
10080 * frame.c: Remove one extra white space after #include
10083 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
10085 * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
10087 2013-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
10089 * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
10090 and dir commands into an if block.
10092 2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
10094 * python/py-breakpoint (struct pybp_code): Use int instead of
10097 2013-02-15 Pedro Alves <pedro@codesourcery.com>
10098 Hafiz Abid Qadeer <abidh@codesourcery.com>
10100 * NEWS: Mention new field "trace-file".
10101 * tracepoint.c (trace_status_mi): Output "trace-file" field.
10102 (tfile_open): Record the trace file's filename in the trace
10104 (tfile_files_info): Mention the name of the trace file.
10105 Check the "filename" field explicitely.
10106 (trace_status_command): Explicitely check "filename" field.
10107 (trace_find_command): Ditto.
10108 (trace_find_pc_command): Ditto.
10109 (trace_find_tracepoint_command): Ditto.
10110 (trace_find_line_command): Ditto.
10111 (trace_find_range_command): Ditto.
10112 (trace_find_outside_command): Ditto.
10113 * tracepoint.h (struct trace_status) <from_file>: Rename it
10114 to "filename" and make it hold the trace file's filename
10115 instead of a boolean.
10116 * remote.c (remote_get_trace_status): Initialize "filename"
10117 field with NULL instead of 0.
10119 2013-02-15 Yao Qi <yao@codesourcery.com>
10121 * remote.c: Fix a typo.
10123 2013-02-14 Pierre Muller <muller@sourceware.org>
10125 * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
10127 2013-02-14 Pedro Alves <palves@redhat.com>
10129 * utils.c (savestring): Don't #undef it. Move function to
10130 common/common-utils.c.
10131 * common/common-utils.c: Include gdb_string.h.
10132 (savestring): Move here from utils.c.
10133 * common/common-utils.h (savestring): Declare.
10135 2013-02-14 Pedro Alves <palves@redhat.com>
10137 * utils.c (savestring): Rename parameter 'size' to 'len'.
10139 2013-02-14 Pedro Alves <palves@redhat.com>
10140 Yufeng Zhang <yufeng.zhang@arm.com>
10142 * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
10143 (aarch64_inferior_data, struct aarch64_inferior_data):
10145 (struct aarch64_process_info): New.
10146 (aarch64_process_list): New global.
10147 (aarch64_find_process_pid, aarch64_add_process)
10148 (aarch64_process_info_get): New functions.
10149 (aarch64_inferior_data_get): Delete.
10150 (aarch64_process_info_get): New function.
10151 (aarch64_forget_process): New function.
10152 (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement.
10153 (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
10154 aarch64_get_debug_reg_state.
10155 (aarch64_notify_debug_reg_change): Use iterate_over_lwps
10156 instead of linux_nat_iterate_watchpoint_lwps.
10157 (aarch64_linux_new_fork): New function.
10158 (aarch64_linux_child_post_startup_inferior): Use
10159 aarch64_forget_process instead of aarch64_init_debug_reg_state.
10160 (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
10161 (aarch64_linux_remove_hw_breakpoint)
10162 (aarch64_handle_aligned_watchpoint)
10163 (aarch64_handle_unaligned_watchpoint)
10164 (aarch64_linux_insert_watchpoint)
10165 (aarch64_linux_remove_watchpoint)
10166 (aarch64_linux_stopped_data_address): Adjust to pass the current
10167 process id to aarch64_debug_reg_state.
10168 (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
10169 linux_nat_new_fork hook, and aarch64_forget_process as
10170 linux_nat_forget_process hook; remove the call to
10171 register_inferior_data_with_cleanup.
10173 2013-02-14 Pedro Alves <palves@redhat.com>
10175 * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
10176 EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
10179 2013-02-14 Pedro Alves <pedro@codesourcery.com>
10180 Hafiz Abid Qadeer <abidh@codesourcery.com>
10182 * tracepoint.h (validate_trace_state_variable_name): Declare.
10183 * tracepoint.c (validate_trace_state_variable_name): New.
10184 (trace_variable_command): Parse the trace state variable's name
10185 without using parse_expression. Do several validations.
10186 * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
10187 trace state variable's name with parse_expression. Validate it.
10189 2013-02-14 Yao Qi <yao@codesourcery.com>
10191 * infcmd.c (breakpoint_proceeded): Remove it.
10193 2013-02-14 Yao Qi <yao@codesourcery.com>
10195 * tracepoint.c (end_actions_pseudocommand): Make it static.
10196 (while_stepping_pseudocommand): Likewise.
10197 * tracepoint.h (end_actions_pseudocommand): Remove the
10199 (while_stepping_pseudocommand): Likewise.
10201 2013-02-14 Yao Qi <yao@codesourcery.com>
10203 * cli/cli-decode.c (help_cmd): Remove the declaration of
10205 (help_all): Likewise.
10207 2013-02-13 Pedro Alves <palves@redhat.com>
10209 * amd64-linux-nat.c (update_debug_registers_callback):
10211 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
10213 (amd64_linux_prepare_to_resume): Pass the lwp's pid to
10214 i386_debug_reg_state.
10215 (amd64_linux_new_fork): New function.
10216 (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
10217 linux_nat_new_fork hook, and i386_forget_process as
10218 linux_nat_forget_process hook.
10219 * i386-linux-nat.c (update_debug_registers_callback):
10221 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
10223 (i386_linux_prepare_to_resume): Pass the lwp's pid to
10224 i386_debug_reg_state.
10225 (i386_linux_new_fork): New function.
10226 (_initialize_i386_linux_nat): Install i386_linux_new_fork as
10227 linux_nat_new_fork hook, and i386_forget_process as
10228 linux_nat_forget_process hook.
10229 * i386-nat.c (i386_init_dregs): Delete.
10230 (i386_inferior_data, struct i386_inferior_data):
10232 (struct i386_process_info): New.
10233 (i386_process_list): New global.
10234 (i386_find_process_pid, i386_add_process, i386_process_info_get):
10236 (i386_inferior_data_get): Delete.
10237 (i386_process_info_get): New function.
10238 (i386_debug_reg_state): New parameter 'pid'. Reimplement.
10239 (i386_forget_process): New function.
10240 (i386_cleanup_dregs): Rewrite.
10241 (i386_update_inferior_debug_regs, i386_insert_watchpoint)
10242 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
10243 (i386_stopped_data_address, i386_insert_hw_breakpoint)
10244 (i386_remove_hw_breakpoint): Adjust to pass the current process id
10245 to i386_debug_reg_state.
10246 (i386_use_watchpoints): Don't register inferior data.
10247 * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
10249 (i386_forget_process): Declare.
10250 * linux-fork.c (delete_fork): Call linux_nat_forget_process.
10251 * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
10252 New static globals.
10253 (linux_child_follow_fork): Don't call linux_nat_new_thread here.
10254 (add_initial_lwp): New, factored out from ...
10255 (add_lwp): ... this. Don't check the number of lwps before
10256 calling linux_nat_new_thread.
10257 (linux_nat_iterate_watchpoint_lwps): Delete.
10258 (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
10259 (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
10261 (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
10263 (linux_nat_kill, linux_nat_mourn_inferior): Call
10264 linux_nat_forget_process.
10265 (linux_nat_set_new_fork, linux_nat_set_forget_process)
10266 (linux_nat_forget_process): New functions.
10267 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
10269 (linux_nat_iterate_watchpoint_lwps): Delete declaration.
10270 (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
10272 (linux_nat_set_new_fork, linux_nat_set_forget_process)
10273 (linux_nat_forget_process): New declarations.
10275 * amd64fbsd-nat.c (super_mourn_inferior): New global.
10276 (amd64fbsd_mourn_inferior): New function.
10277 (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
10278 * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
10280 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
10282 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
10285 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
10287 * aarch64-linux-nat.c (debug_reg_change_callback)
10288 (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
10291 2013-02-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
10293 * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
10296 2013-02-13 Pedro Alves <palves@redhat.com>
10297 Hafiz Abid Qadeer <abidh@codesourcery.com>
10299 * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
10301 2013-02-12 Tom Tromey <tromey@redhat.com>
10304 * c-exp.y (lex_one_token): Initialize other fields of yylval on
10306 (classify_inner_name): Remove 'first_name' argument, add
10307 'context'. Remove unused variable.
10308 (yylex): Explicitly maintain the context type. Exit loop earlier
10309 if NAME result is seen.
10311 2013-02-12 Pedro Alves <palves@redhat.com>
10313 * amd64-darwin-tdep.c: Add (C) after Copyright.
10314 * cli/cli-cmds.h: Ditto.
10315 * cli/cli-decode.c: Ditto.
10316 * cli/cli-decode.h: Ditto.
10317 * cli/cli-dump.c: Ditto.
10318 * cli/cli-dump.h: Ditto.
10319 * cli/cli-interp.c: Ditto.
10320 * cli/cli-logging.c: Ditto.
10321 * cli/cli-script.c: Ditto.
10322 * cli/cli-script.h: Ditto.
10323 * cli/cli-setshow.c: Ditto.
10324 * cli/cli-setshow.h: Ditto.
10325 * cli/cli-utils.c: Ditto.
10326 * cli/cli-utils.h: Ditto.
10327 * config/alpha/nm-osf3.h: Ditto.
10328 * config/djgpp/djconfig.sh: Ditto.
10329 * config/i386/nm-fbsd.h: Ditto.
10330 * config/i386/nm-i386gnu.h: Ditto.
10331 * config/nm-linux.h: Ditto.
10332 * config/nm-nto.h: Ditto.
10333 * config/rs6000/nm-rs6000.h: Ditto.
10334 * config/sparc/nm-sol2.h: Ditto.
10335 * darwin-nat-info.c: Ditto.
10338 * gdb-demangle.h: Ditto.
10339 * i386-darwin-nat.c: Ditto.
10340 * i386-darwin-tdep.c: Ditto.
10341 * linux-fork.h: Ditto.
10342 * m32c-tdep.c: Ditto.
10343 * microblaze-linux-tdep.c: Ditto.
10344 * microblaze-rom.c: Ditto.
10345 * microblaze-tdep.c: Ditto.
10346 * microblaze-tdep.h: Ditto.
10347 * mips-linux-tdep.h: Ditto.
10348 * ppc-ravenscar-thread.c: Ditto.
10349 * ppc-ravenscar-thread.h: Ditto.
10350 * prologue-value.c: Ditto.
10351 * prologue-value.h: Ditto.
10352 * ravenscar-thread.c: Ditto.
10353 * ravenscar-thread.h: Ditto.
10354 * sparc-ravenscar-thread.c: Ditto.
10355 * sparc-ravenscar-thread.h: Ditto.
10356 * tilegx-linux-tdep.c: Ditto.
10357 * unwind_stop_reasons.def: Ditto.
10358 * windows-nat.h: Ditto.
10359 * xtensa-linux-tdep.c: Ditto.
10360 * xtensa-xtregs.c: Ditto.
10361 * regformats/regdat.sh: Ditto.
10362 * regformats/regdef.h: Ditto.
10364 2013-02-12 Pedro Alves <palves@redhat.com>
10366 * break-catch-sig.c: Update copyright years.
10368 2013-02-11 Siva Chandra Reddy <sivachandra@google.com>
10370 Add support for a destructor for ui_out data and use it to
10371 provide a ui_out destructor.
10372 * ui-out.h: Declare the new ui_out destructor.
10373 (ui_out_impl): Add a field for data destructor in ui_out_impl.
10374 * ui-out.c (default_data_destroy): Add a default data destructor
10375 which does nothing.
10376 (default_ui_out_impl): Set the new data_destroy field to
10377 default_data_destroy
10378 (uo_data_destroy): Local function which invokes the data
10379 destructor if present.
10380 (clear_table): Local function which clears the table data of a
10382 (ui_out_destroy): Public function which frees a ui_out object.
10383 (ui_out_table_end): Use the new clear_table function.
10384 * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
10386 * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
10389 2013-02-11 Doug Evans <dje@google.com>
10391 * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
10392 (printf_decfloat): New function. Broken out from ui_printf.
10393 Remove unnecessary code to shift the entire format string down.
10394 (printf_pointer): New function.
10395 (ui_printf): Code to print C strings, wide C strings, decfloats,
10396 and pointers moved to separate functions.
10398 2013-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
10400 * valops.c (value_assign): Handling bitfield offset in
10401 `lval_internalvar_component' case.
10403 2013-02-08 Doug Evans <dje@google.com>
10405 * common/format.c (parse_format_string): Fix whitespace.
10407 2013-02-08 Matthew Gretton-Dann <matthew.gretton-dann@linaro.org>
10409 * stack.c (return_command): Work around uninitialized variable
10412 2013-02-08 Yufeng Zhang <yufeng.zhang@arm.com>
10414 * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
10415 number of the registers from 36 to 34.
10417 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
10419 * NEWS: Mention new AArch64 native and target support.
10421 2013-02-08 Marcus Shawcroft <marcus.shawcroft@arm.com>
10423 * MAINTAINERS (Write After Approval): Add myself.
10425 2013-02-08 Jim MacArthur <jim.macarthur@arm.com>
10426 Marcus Shawcroft <marcus.shawcroft@arm.com>
10427 Nigel Stephens <nigel.stephens@arm.com>
10428 Yufeng Zhang <yufeng.zhang@arm.com>
10430 * aarch64-linux-nat.c: New file.
10431 * config/aarch64/linux.mh: New file.
10432 * configure.host: Add AArch64.
10433 * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
10435 2013-02-07 Doug Evans <dje@google.com>
10437 * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
10438 disassemble command.
10440 2013-02-07 Marcus Shawcroft <marcus.shawcroft@arm.com>
10442 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
10443 set_gdbarch_fetch_tls_load_module_address.
10445 2013-02-06 David S. Miller <davem@davemloft.net>
10447 * sparc-tdep.c (sparc32_return_value): Handle writing return value when
10448 using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
10449 * value.c (struct_return_convention): New function.
10450 (using_struct_return): Implement in terms of struct_return_convention.
10451 * value.h (struct_return_convention): Declare.
10452 * stack.c (return_command): Allow successful overriding of the return
10453 value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
10455 2013-02-06 Tom Tromey <tromey@redhat.com>
10457 * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
10458 outside of TRY_CATCH.
10460 2013-02-06 Yao Qi <yao@codesourcery.com>
10462 * mi/mi-interp.c: Include "tracepoint.h".
10463 (mi_tsv_modified): Declare.
10464 (mi_tsv_created, mi_tsv_deleted): Update declaration.
10465 (mi_interpreter_init): Call observer_attach_tsv_modified.
10466 (mi_tsv_modified): New.
10467 (mi_tsv_created, mi_tsv_deleted): Update.
10468 * tracepoint.c (trace_variable_command): Call
10469 observer_notify_tsv_modified if the initial value of tsv is
10471 (delete_trace_state_variable): Call
10472 observer_notify_tsv_deleted earlier.
10473 (trace_variable_command): Caller update.
10474 (create_tsv_from_upload): Likewise.
10475 * observer.sh: Declare "struct trace_state_variable".
10477 * NEWS: Mention the new MI notification "=tsv-modified".
10479 2013-02-05 Doug Evans <dje@google.com>
10481 * completer.c (location_completer): Fix typo in comment.
10483 2013-02-05 Jan Kratochvil <jan.kratochvil@redhat.com>
10485 * breakpoint.c (add_location_to_breakpoint): Insert the location with
10488 2013-02-05 Marcus Shawcroft <marcus.shawcroft@arm.com>
10490 * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
10491 Refactor if statement to avoid trailing || operator.
10493 2013-02-05 Andreas Tobler <andreast@fgznet.ch>
10495 * NEWS: Add PowerPC FreeBSD as a new native configuration.
10497 2013-02-04 Andreas Tobler <andreast@fgznet.ch>
10499 * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
10500 * configure.host: Add powerpc*-*-freebsd* target.
10501 * configure.tgt: Add target info for powerpc*-*-freebsd*.
10502 * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
10503 * config/powerpc/fbsd.mh: New file.
10505 2013-02-04 Sergio Durigan Junior <sergiodj@redhat.com>
10506 Denys Vlasenko <dvlasenk@redhat.com>
10507 Pedro Alves <palves@redhat.com>
10509 * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
10510 (struct elf_internal_linux_prpsinfo): Forward declare.
10511 * gdbarch.h, gdbarch.c: Regenerate.
10512 * linux-tdep.c: Include `cli/cli-utils.h'.
10513 (linux_fill_prpsinfo): New function.
10514 (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
10515 an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
10516 elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
10517 depending on gdbarch pointer bitness.
10518 * ppc-linux-tdep.c: Include elf-bfd.h.
10519 (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
10522 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
10523 Marcus Shawcroft <marcus.shawcroft@arm.com>
10524 Nigel Stephens <nigel.stephens@arm.com>
10525 Yufeng Zhang <yufeng.zhang@arm.com>
10527 * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
10529 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
10530 Marcus Shawcroft <marcus.shawcroft@arm.com>
10531 Nigel Stephens <nigel.stephens@arm.com>
10532 Yufeng Zhang <yufeng.zhang@arm.com>
10534 * aarch64-newlib-tdep.c: New file.
10535 * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
10537 * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
10538 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
10539 (ALLDEPFILES): Add aarch64-newlib-tdep.c.
10540 * osabi.c (gdb_osabi_names): Add "Newlib".
10542 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
10543 Marcus Shawcroft <marcus.shawcroft@arm.com>
10544 Nigel Stephens <nigel.stephens@arm.com>
10545 Yufeng Zhang <yufeng.zhang@arm.com>
10547 * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
10548 (ALLDEPFILES): Add aarch64-linux-tdep.c.
10549 * aarch64-linux-tdep.c: New file.
10550 * aarch64-linux-tdep.h: New file.
10551 * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
10552 * configure.tgt: Add aarch64-none-linux-gnu.
10554 2013-02-04 Jim MacArthur <jim.macarthur@arm.com>
10555 Marcus Shawcroft <marcus.shawcroft@arm.com>
10556 Nigel Stephens <nigel.stephens@arm.com>
10557 Yufeng Zhang <yufeng.zhang@arm.com>
10559 * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
10560 (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
10561 (ALLDEPFILES): Add aarch64-tdep.c.
10562 * aarch64-tdep.c: New file.
10563 * aarch64-tdep.h: New file.
10564 * configure.tgt: Add AArch64.
10565 * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
10566 (aarch64-expedite): New definition.
10567 * features/aarch64-core.xml: New file.
10568 * features/aarch64-fpu.xml: New file.
10569 * features/aarch64-without-fpu.c: New file (generated).
10570 * features/aarch64-without-fpu.xml: New file.
10571 * features/aarch64.c: New file (generated).
10572 * features/aarch64.xml: New file.
10573 * regformats/aarch64-without-fpu.dat: New file (generated).
10574 * regformats/aarch64.dat: New file (generated).
10576 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10578 * contrib/expect-read1.c: New file.
10579 * contrib/expect-read1.sh: New file.
10581 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10583 * dwarf2read.c (file_file_name): New function with code from
10585 (file_full_name): Move most of the code to file_file_name.
10586 (macro_start_file): Rename variable full_name to file_name and use
10587 file_file_name for it. Add comp_dir parameter to new_macro_table.
10588 * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
10589 macro_source_file->filename access by macro_source_fullname call.
10590 * macroscope.c (_initialize_macroscope): Update the new_macro_table
10592 * macrotab.c (struct macro_table): New field comp_dir.
10593 (macro_include): New variables link_fullname and source_fullname.
10594 Replace any macro_source_file->filename access by macro_source_fullname
10596 (macro_lookup_inclusion): Remove the partial filenames checking code.
10597 (check_for_redefinition): New variables source_fullname and
10598 found_key_fullname. Replace any macro_source_file->filename access by
10599 macro_source_fullname call.
10600 (macro_undef): New variables source_fullname and key_fullname. Replace
10601 any macro_source_file->filename access by macro_source_fullname call.
10602 (macro_lookup_definition): New variables retval and source_fullname.
10603 Replace any macro_source_file->filename access by macro_source_fullname
10605 (foreach_macro): New variable key_fullname. Replace any
10606 macro_source_file->filename access by macro_source_fullname call.
10607 (foreach_macro_in_scope): New variable datum_fullname. Replace any
10608 macro_source_file->filename access by macro_source_fullname call.
10609 (new_macro_table): Add parameter comp_dir. Initialize T with it.
10610 (macro_source_fullname): New function.
10611 * macrotab.h (struct macro_source_file): Extent the filename field
10613 (new_macro_table): New parameter comp_dir, add a comment for it.
10614 (macro_source_fullname): new declaration.
10616 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10618 * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
10619 this_real_name to outer block. Use it also for
10620 compare_filenames_for_search.
10621 (dw2_expand_symtabs_matching): New variable this_real_name. Use it
10622 with dw2_get_real_path for file_matcher, considering also
10623 BASENAMES_MAY_DIFFER.
10624 (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
10626 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10628 * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
10629 to the file_matcher parameter. Pass 0 to it.
10630 (dwarf2_create_include_psymtab): Copy also DIRNAME.
10631 * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
10632 NULL psymtab_to_fullname result.
10633 (psymtab_to_fullname): Remove variable r. Never return NULL, assemble
10634 an expected filename instead.
10635 (expand_symtabs_matching_via_partial): Add basenames parameter to the
10636 file_matcher parameter. Call also psymtab_to_fullname, after newly
10637 considering BASENAMES_MAY_DIFFER.
10638 * source.c (rewrite_source_path): Remove static.
10639 * source.h (rewrite_source_path): New declaration.
10640 * symfile.h (struct quick_symbol_functions): Add basenames parameter to
10641 the expand_symtabs_matching field. Comment it.
10642 * symtab.c (file_matches): New function comment. Add parameter
10643 basenames, implement it.
10644 (search_symbols_file_matches): Add basenames parameter. Update the
10645 file_matches caller.
10646 (search_symbols): Match FILES also against symtab_to_fullname.
10647 Optimize it for BASENAMES_MAY_DIFFER.
10649 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10651 * source.c (print_source_lines_base): Print for TUI also "fullname".
10652 * tui/tui-data.c (init_content_element): Change tui_locator_element
10653 field to full_name.
10654 * tui/tui-data.h (struct tui_locator_element): Likewise.
10655 * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
10656 tui_update_locator_filename calls to tui_update_locator_fullname.
10657 Replace symtab->filename refererence by symtab_to_fullname call.
10658 * tui/tui-out.c (tui_field_string): Check for "fullname" now.
10659 * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
10660 field to full_name. Replace symtab->filename refererence by
10661 symtab_to_fullname call.
10662 (tui_show_symtab_source): Rename parameter to fullname. Change
10663 tui_locator_element field to full_name.
10664 * tui/tui-stack.c: Include source.h.
10665 (tui_set_locator_filename): Rename the declaration to ...
10666 (tui_set_locator_fullname): ... here. Rename its parameter to
10667 fullname, updates its comment.
10668 (tui_set_locator_info): Rename its parameter to fullname.
10669 (tui_set_locator_filename): Rename the definition to ...
10670 (tui_set_locator_fullname): ... here. Rename its parameter to
10671 fullname, updates its comment. Change tui_locator_element field to
10673 (tui_set_locator_info): Rename its parameter to fullname.
10674 (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
10675 (tui_update_locator_filename): Rename to ...
10676 (tui_update_locator_fullname): ... here. Rename callee to
10677 tui_set_locator_fullname.
10678 (tui_show_frame_info): Replace symtab->filename refererence by
10679 symtab_to_fullname call.
10680 * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
10681 (tui_update_locator_fullname): ... here.
10682 * tui/tui-winsource.c (tui_display_main): Rename the callee to
10683 tui_update_locator_fullname. Replace symtab->filename refererence by
10684 symtab_to_fullname call.
10685 * tui/tui.c (tui_show_source): Rename its parameter to fullname.
10686 Rename the callee to tui_update_locator_fullname.
10687 * tui/tui.h (tui_show_source): Rename its parameter to fullname.
10689 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10691 * ada-lang.c (user_select_syms): Replace symtab->filename refererences
10692 by symtab_to_filename_for_display calls.
10693 * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
10694 (clear_command): New variable sal_fullname, initialize it. Replace
10695 compare_filenames_for_search by filename_cmp with sal_fullname.
10696 (say_where, update_static_tracepoint): Replace symtab->filename
10697 refererences by symtab_to_filename_for_display calls.
10698 * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
10700 * dwarf2read.c: Include source.h.
10701 (fixup_go_packaging): Replace symtab->filename refererences by
10702 symtab_to_filename_for_display calls.
10703 * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
10704 Replace symtab->filename refererences by symtab_to_filename_for_display
10706 (create_sals_line_offset, convert_linespec_to_sals): New variable
10707 fullname, initialize it, replace symtab->filename reference by the
10709 * linux-fork.c: Include source.h.
10710 (info_checkpoints_command): Replace symtab->filename refererences by
10711 symtab_to_filename_for_display calls.
10712 * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
10713 by symtab_to_filename_for_display calls.
10714 * mdebugread.c: Include source.h.
10715 (psymtab_to_symtab_1): Replace symtab->filename refererences by
10716 symtab_to_filename_for_display calls.
10717 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
10718 (mi_cmd_file_list_exec_source_files): Likewise.
10719 * printcmd.c: Include source.h.
10720 (build_address_symbolic): Replace symtab->filename refererences by
10721 symtab_to_filename_for_display calls.
10722 * psymtab.c (partial_map_symtabs_matching_filename)
10723 (read_psymtabs_with_fullname): Call compare_filenames_for_search also
10724 with psymtab_to_fullname.
10725 * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
10726 by symtab_to_filename_for_display calls.
10727 (stpy_get_filename): New variable filename, initialize it, use instead
10728 of symtab->filename refererences.
10729 (salpy_str): Make variable filename const char *. Replace
10730 symtab->filename refererences by symtab_to_filename_for_display calls.
10731 * skip.c: Include source.h and filenames.h.
10732 (skip_file_command): Remove const from the symtab variable. Replace
10733 symtab->filename refererences by symtab_to_fullname call.
10734 (function_name_is_marked_for_skip): New variables searched_for_fullname
10735 and fullname. Use them to search also with symtab's fullname.
10736 * source.c (find_source_lines): Replace symtab->filename refererences
10737 by symtab_to_filename_for_display calls.
10738 (print_source_lines_base): New variable filename, use it instead of
10739 symtab->filename. Replace symtab->filename refererences by
10740 symtab_to_filename_for_display calls.
10741 (line_info, forward_search_command): Replace symtab->filename
10742 refererences by symtab_to_filename_for_display calls.
10743 (reverse_search_command): Replace symtab->filename refererences by
10744 symtab_to_filename_for_display calls. New variable filename for it.
10745 * stack.c (frame_info): Likewise.
10746 * symmisc.c: Include source.h.
10747 (dump_objfile, dump_symtab_1, maintenance_print_symbols)
10748 (maintenance_info_symtabs): Replace symtab->filename refererences by
10749 symtab_to_filename_for_display calls.
10750 * symtab.c (iterate_over_some_symtabs): Call
10751 compare_filenames_for_search also with symtab_to_fullname.
10752 (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
10753 symtab->filename refererences by symtab_to_filename_for_display calls.
10754 (find_line_symtab): Replace symtab->filename refererences by
10755 symtab_to_filename_for_display calls.
10756 (file_matches): Replace filename_cmp by compare_filenames_for_search.
10757 (print_symbol_info): Make the last parameter const char *. New
10758 variable s_filename. Use it in the function.
10759 (symtab_symbol_info): Make the last_filename variable const char *.
10760 Replace symtab->filename refererences by symtab_to_filename_for_display
10762 (rbreak_command): New variable fullname. Use it. Replace
10763 symtab->filename refererence by symtab_to_filename_for_display call.
10764 * tracepoint.c (set_traceframe_context, trace_find_line_command)
10765 (print_one_static_tracepoint_marker): Replace symtab->filename
10766 refererences by symtab_to_filename_for_display calls.
10767 * tui/tui-source.c (tui_set_source_content): New variables filename and
10768 s_filename. Replace symtab->filename refererences by this variable.
10769 Replace other symtab->filename refererences by
10770 symtab_to_filename_for_display calls.
10772 2013-02-03 Eldar Gaynetdinov <hal9000ed2k@gmail.com>
10773 Jan Kratochvil <jan.kratochvil@redhat.com>
10775 Add a new variable that controls a way in which filenames are
10777 * NEWS (set filename-display): New entry.
10778 * source.c (filename_display_basename, filename_display_relative)
10779 (filename_display_absolute, filename_display_kind_names)
10780 (filename_display_string, show_filename_display_string)
10781 (symtab_to_filename_for_display): New.
10782 (_initialize_source): Added initialization of 'filename-display'
10784 * source.h (symtab_to_filename_for_display): Added declaration.
10785 * stack.c (print_frame): Added new variable and calling of a new
10786 function and condition with this variable. Changed third argument of
10787 calling of a function.
10789 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10791 * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
10792 Rename field reference filename to fullname.
10793 * tui/tui-data.h (struct tui_source_info): Rename field filename to
10794 fullname. New comment for it.
10795 * tui/tui-source.c (tui_set_source_content): Rename field reference
10796 filename to fullname. Initialize field by symtab_to_fullname now.
10797 * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
10798 reference filename to fullname. Use symtab_to_fullname during
10801 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10804 * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
10805 (dw2_expand_symtabs_with_fullname): ... here. Rename parameter
10806 filename to fullname. Rename variable this_name to this_fullname.
10807 Lowercase FILENAME_CMP call.
10808 (dw2_find_symbol_file): New comment for the returned string.
10809 (dwarf2_gdb_index_functions): Rename the function to
10810 dw2_expand_symtabs_with_fullname.
10811 * psymtab.c (read_psymtabs_with_filename): Rename to ...
10812 (read_psymtabs_with_fullname): ... here. Rename parameter filename to
10814 (psym_functions): Rename the function to read_psymtabs_with_fullname.
10815 * symfile.h (struct quick_symbol_functions): Rename field
10816 expand_symtabs_with_filename to expand_symtabs_with_fullname and its
10817 parameter filename to fullname. Document returned string meaning for
10819 * symtab.c (find_line_symtab): Rename the called function to
10820 expand_symtabs_with_fullname.
10822 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10825 * breakpoint.c (clear_command): Remove variable is_abs, unify the
10826 call of filename_cmp with compare_filenames_for_search.
10827 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
10828 is_abs, unify the call of FILENAME_CMP with
10829 compare_filenames_for_search. New gdb_asserts for real_path and name.
10830 Unify the call of compare_filenames_for_search with FILENAME_CMP.
10831 * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
10832 * symfile.h (struct quick_symbol_functions): Extend the comment for
10833 map_symtabs_matching_filename.
10834 * symtab.c (compare_filenames_for_search): Remove the function comment
10835 relative path requirement. Handle absolute filenames, with a comment.
10836 (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
10837 FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
10838 real_path and name. Unify the call of compare_filenames_for_search
10840 (iterate_over_symtabs): New gdb_assert on REAL_PATH.
10842 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10845 * breakpoint.c (print_breakpoint_location): Replace bp_location field
10846 source_file references by symtab field references. Remove variables
10848 (momentary_breakpoint_from_master, add_location_to_breakpoint):
10849 (clear_command, say_where): Replace bp_location field source_file
10850 references by symtab field references.
10851 (bp_location_dtor): Remove the source_file reference.
10852 (update_static_tracepoint): Replace bp_location field source_file
10853 references by symtab field references.
10854 (breakpoint_free_objfile): New function.
10855 * breakpoint.h (struct bp_location): Extend the comment for line_number.
10856 Replace the field source_file by field symtab, extend its comment.
10857 (breakpoint_free_objfile): New declaration.
10858 * objfiles.c (free_objfile): Call breakpoint_free_objfile.
10859 * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
10860 field source_file references by symtab field references.
10862 2013-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
10864 Replace xfullpath calls by gdb_realpath calls.
10865 * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
10867 * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
10868 Remove it from the iterate_over_some_symtabs call.
10869 (dw2_map_symtabs_matching_filename): Remove parameter full_path.
10870 Remove it from the dw2_map_expand_apply calls, remove a block handling
10872 * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
10873 Remove it from the iterate_over_some_symtabs call.
10874 (partial_map_symtabs_matching_filename): Remove parameter full_path.
10875 Remove it from the partial_map_expand_apply calls, remove a block
10876 handling it. Drop gdb_realpath call and cleanups from the real_path
10878 * source.c (openp): Drop the comment part about xfullpath. Replace
10879 xfullpath calls by gdb_realpath calls.
10880 (find_and_open_source): Replace xfullpath call by gdb_realpath call.
10881 * symfile.h (struct quick_symbol_functions): Remove parameter full_path
10882 from method map_symtabs_matching_filename and its comment.
10883 * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
10885 * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
10886 remove it also from the function comment, remove a block handling it.
10887 Drop gdb_realpath call and cleanups from the real_path handling.
10888 (iterate_over_symtabs): Drop variable full_path and its use.
10889 * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
10890 * utils.c (xfullpath): Remove.
10891 * utils.h (xfullpath): Remove.
10893 2013-02-01 Andreas Tobler <andreast@fgznet.ch>
10895 * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
10896 (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
10897 (ALLDEPFILES): Add ppc64-tdep.c.
10898 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
10899 ppc64-tdep.o to gdb_target_obs.
10900 * ppc64-tdep.h: New file.
10901 * ppc64-tdep.c: New file.
10902 (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
10903 ppc-linux-tdep.c to here.
10904 (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
10905 (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
10906 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
10907 (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
10908 from ppc-linux-tdep.c to here.
10909 (ppc64_convert_from_func_ptr_addr): Rename from
10910 ppc64_linux_convert_from_func_ptr_addr to
10911 ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
10914 (read_insn): Move from ppc-linux-tdep.c to here.
10915 (insns_match_pattern, insn_d_field, insn_ds_field): Move
10916 from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
10917 * ppc-linux-tdep.c: Include ppc64-tdep.h.
10918 Removed above functions.
10919 (ppc_linux_init_abi): Adjust.
10921 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
10923 * ada-valprint.c (ada_print_floating): Remove unused 'len'.
10925 2013-02-01 Aleksandar Ristovski <aristovski@qnx.com>
10927 * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
10929 2013-02-01 Pedro Alves <palves@redhat.com>
10931 * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
10932 * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
10934 2013-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
10936 * elfread.c (elf_symfile_read): Limit separate debug info additions to
10937 files with no separate debug info.
10938 * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
10939 * symfile.c (read_symbols): Call find_separate_debug_file_in_section
10940 only for files with no separate debug info.
10942 2013-01-31 Tom Tromey <tromey@redhat.com>
10944 * jit.c (jit_program_space_data): Rename from jit_inferior_data;
10946 (struct jit_program_space_data): Rename from jit_inferior_data.
10948 (get_jit_program_space_data): Rename from get_jit_inferior_data.
10949 Change return type. Attach data to program space.
10950 (jit_program_space_data_cleanup): Rename from
10951 jit_inferior_data_cleanup; change argument type.
10952 (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
10954 (jit_register_code): Update.
10955 (jit_update_inferior_cache): Remove.
10956 (jit_breakpoint_deleted): Get jit data from the location's program
10958 (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
10959 'ps_data', change type.
10960 (jit_inferior_init, jit_breakpoint_re_set_internal)
10961 (jit_event_handler): Update.
10962 (free_objfile_data): Get data from objfile's program space.
10963 (_initialize_jit): Update.
10965 2013-01-31 Tom Tromey <tromey@redhat.com>
10968 * jit.c (struct jit_inferior_data) <cached_code_address,
10969 jit_breakpoint>: New fields.
10970 (jit_breakpoint_re_set_internal): Fix logging. Only create
10971 breakpoint if cached address has changed.
10972 (jit_update_inferior_cache, jit_breakpoint_deleted): New
10974 (_initialize_jit): Register breakpoint deleted observer.
10976 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10978 * infrun.c (handle_syscall_event): Remove unused gdbarch.
10979 (save_infcall_suspend_state): Ifdef out unused inf.
10980 (restore_infcall_suspend_state): Ifdef out unused inf.
10981 * jit.c (jit_register_code): Remove unused i, b, inf_data.
10982 (jit_frame_sniffer): Remove unused inf_data.
10984 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10986 * c-exp.y (classify_inner_name): Remove unused type.
10987 * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
10988 in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
10990 (c_get_string): Remove unused kind.
10991 * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
10993 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
10995 * charset.c (intermediate_encoding): Remove unused i.
10996 * completer.c (signal_completer): Remove unused i.
10997 * continuations.c (discard_my_continuations_1): Remove unused
10999 * corelow.c (core_close): Remove unuseD name.
11000 (get_core_siginfo): Remove unused pid.
11001 * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
11003 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
11004 (loclist_describe_location): Remove unused first.
11005 * event-top.c (command_line_handler): Remove unused got_eof.
11006 * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
11007 (resize_section_table): Remove unused old_value.
11008 * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
11009 * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
11010 * i386-tdep.c (i386_process_record): Remove unused rex.
11011 * infcmd.c (get_return_value): Remove unused uiout.
11012 * jv-lang.c (type_from_class): Remove unused is_array.
11013 * jv-valprint.c (java_val_print): Remove unused i.
11014 * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
11015 * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
11016 * m2-typeprint.c (m2_print_type): Remove unused code.
11017 * macroexp.c (get_character_constant): Remove unused body_start.
11018 (macro_stringify): Remove unused result.
11019 * objc-lang.c (find_methods): Remove unused gdbarch.
11020 * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
11021 * regcache.c (regcache_cooked_read): Remove unused gdbarch.
11022 * stack.c (print_frame_args): Remove unused summary.
11023 * thread.c (thread_apply_command): Remove unused p.
11024 * valarith.c (value_x_unop): Remove unused mangle_ptr.
11025 * valops.c (search_struct_method): Remove unused skip.
11026 * valprint.c (generic_val_print): Remove unused byte_order.
11027 * varobj.c (varobj_update): Remove unused changed.
11028 * cli/cli-cmds.c (complete_command): Remove unused next_item.
11029 (alias_command): Remove unused c.
11030 * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
11031 * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
11033 (mi_cmd_data_write_memory): Remove unused word_format.
11034 (mi_cmd_data_write_memory_bytes): Remove unused r.
11035 * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
11037 * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
11038 * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
11041 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
11043 * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
11044 * symtab.c (iterate_over_symtabs): Remove unused s.
11045 (find_pc_sect_symtab): Remove unused pspAce.
11046 (find_pc_sect_line): Remove unused alt_symtab.
11047 (find_pcs_for_symtab_line): Remove unused ix, previous_function.
11048 (completion_list_add_name): Remove unused newsize.
11050 2013-01-31 Tom Tromey <tromey@redhat.com>
11053 * dwarf2read.c (read_tag_ptr_to_member_type): Handle
11056 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
11058 * target.c (target_read_string): Remove unused origlen.
11060 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
11062 * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
11063 * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
11064 * ax-general.c (ax_print): Remove unused is_float.
11065 * blockframe.c (block_innermost_frame): Remove unused start, end.
11066 * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
11068 2013-01-31 Aleksandar Ristovski <aristovski@qnx.com>
11070 * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
11071 (svr4_read_so_list): Remove unused lmo.
11072 * solib-target.c (solib_target_relocate_section_addresses): Remove
11075 2013-01-30 Tom Tromey <tromey@redhat.com>
11077 * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
11079 2013-01-30 Tom Tromey <tromey@redhat.com>
11081 * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
11082 * utils.c (gnu_debuglink_crc32): Remove.
11083 * utils.h (gnu_debuglink_crc32): Don't declare.
11085 2013-01-30 Tom Tromey <tromey@redhat.com>
11087 * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
11088 (read_structure_type, read_enumeration_type): Remove cast.
11090 2013-01-30 Tom Tromey <tromey@redhat.com>
11092 * dwarf2read.c (read_namespace_type): Remove cast.
11093 (read_typedef): Likewise.
11095 2013-01-29 Tom Tromey <tromey@redhat.com>
11097 * dwarf2read.c (free_dwo_file): Remove assert.
11099 2013-01-29 Tom Tromey <tromey@redhat.com>
11101 * value.c (deprecated_set_value_modifiable): Remove.
11102 * value.h (deprecated_set_value_modifiable): Remove.
11104 2013-01-28 Doug Evans <dje@google.com>
11106 * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
11107 to addresses from dwo files.
11109 2013-01-25 Siva Chandra Reddy <sivachandra@google.com>
11111 * valops.c (find_overload_match): Remove unused argument 'lax'.
11112 * value.h: Remove unused argument 'lax' from the declaration of
11113 find_overload_match.
11114 * eval.c (value_subexp_standard): Do not pass a 'lax' argument
11115 to find_overload_match.
11116 * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
11117 argument to find_overload_match.
11119 2013-01-25 Tom Tromey <tromey@redhat.com>
11121 * dwarf2read.c (processing_has_namespace_info): Remove.
11122 (struct dwarf2_cu) <processing_has_namespace_info>: New field.
11123 (process_die, read_func_scope, dwarf2_start_symtab)
11124 (new_symbol_full): Update.
11126 2013-01-25 Tom Tromey <tromey@redhat.com>
11128 * cp-namespace.c (cp_set_block_scope): Remove.
11129 * cp-support.h (cp_set_block_scope): Remove.
11130 * dbxread.c: Include block.h.
11131 (cp_set_block_scope): New function.
11132 (process_one_symbol): Update.
11133 * dwarf2read.c (read_func_scope): Use block_set_scope.
11135 2013-01-25 Pedro Alves <palves@redhat.com>
11137 * remote.c (add_current_inferior_and_thread): Tweak comment.
11139 2013-01-25 Tom Tromey <tromey@redhat.com>
11141 * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
11142 (cp_add_using_directive): Add 'copy_names' argument.
11143 * cp-support.h (cp_add_using_directive): Update.
11144 (struct using_direct) <import_src, import_dest, alias,
11145 declaration>: Now const.
11146 * dwarf2read.c (read_import_statement): Use obconcat.
11147 Don't copy names passed to cp_add_using_directive.
11149 2013-01-25 Tom Tromey <tromey@redhat.com>
11151 * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
11153 2013-01-25 Pedro Alves <palves@redhat.com>
11155 * remote.c (stop_reply_extract_thread): New.
11156 (add_current_inferior_and_thread): New parameter 'wait_status'.
11158 (remote_start_remote): Pass wait status to
11159 add_current_inferior_and_thread.
11160 (extended_remote_run): Update comment.
11161 (extended_remote_create_inferior_1): Pass wait status to
11162 add_current_inferior_and_thread.
11164 2013-01-25 Andrew Burgess <aburgess@broadcom.com>
11165 Ulrich Weigand <uweigand@de.ibm.com>
11167 * valarith.c (value_vector_widen): New function for replicating a
11168 scalar into a vector.
11169 (value_binop): Use value_vector_widen to widen scalar to vector
11170 rather than casting, this better matches gcc C behaviour.
11171 * valops.c (value_casst): Update logic for casting between vector
11172 types, and for casting from scalar to vector, try to match gcc C
11174 * value.h (value_vector_widen): Declare.
11175 * opencl-lang.c (opencl_value_cast): New opencl specific casting
11176 function, handle special case for casting scalar to vector.
11177 (opencl_relop): Use opencl_value_cast.
11178 (evaluate_subexp_opencl): Use opencl_value_cast instead of
11179 value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
11180 in order to use opencl_value_cast.
11182 2013-01-25 Yao Qi <yao@codesourcery.com>
11184 * event-loop.c: Include "queue.h".
11185 (gdb_event_p): New typedef.
11186 (DECLARE_QUEUE_P): Use.
11187 (DEFINE_QUEUE_P): Use.
11188 (async_queue_event): Remove.
11189 (gdb_event_xfree): New.
11190 (initialize_event_loop): New.
11191 (process_event): Use QUEUE macros.
11192 (event_queue): Remove.
11193 (gdb_wait_for_event): Caller update.
11194 (check_async_event_handlers): Likewise.
11195 (poll_timers): Likewise.
11196 * event-loop.h (initialize_event_loop): Declare.
11197 * event-loop.c (gdb_event_xfree): New.
11198 * top.c (gdb_init): Call initialize_event_loop.
11200 2013-01-25 Yao Qi <yao@codesourcery.com>
11202 * event-loop.c (async_queue_event): Remove one parameter
11203 'position'. Remove code handling 'position' == TAIL.
11204 (gdb_wait_for_event): Caller update.
11205 (check_async_event_handlers): Caller update.
11206 (poll_timers): Caller update.
11207 * event-loop.h (enum queue_position): Remove.
11209 2013-01-25 Maxim Kuvyrkov <maxim@kugelworks.com>
11211 * MAINTAINERS: Update my email.
11213 2013-01-25 Yao Qi <yao@codesourcery.com>
11215 * main.c (print_gdb_help): Remove "--epoch" from the help
11218 2013-01-24 Ulrich Weigand <uweigand@de.ibm.com>
11220 * symtab.c (skip_prologue_using_sal): Consider a file
11221 change the same as an increased line number
11223 2013-01-24 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
11225 * MAINTAINERS (Write After Approval): Add myself to the list.
11227 2013-01-24 Tom Tromey <tromey@redhat.com>
11229 * ada-lang.h (ada_decode_symbol): Make return type const.
11230 * ada-lang.c (ada_decode_symbol): Likewise.
11232 2013-01-23 Doug Evans <dje@google.com>
11234 * linespec.c (find_linespec_symbols): Make static.
11236 2013-01-23 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
11238 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
11239 type on float conversion for complex type.
11241 2013-01-23 Siva Chandra Reddy <sivachandra@google.com>
11243 Add a new class gdb.Architecture which exposes GDB's
11244 internal representation of architecture via GDB Python API.
11245 * Makefile.in: Add entries corresponding to the new file
11247 * NEWS (Python Scripting): Add entries for the new class
11248 gdb.Architecture and the new method gdb.Frame.architecture.
11249 * python/py-arch.c: Implement gdb.Architecture class.
11250 * python/py-frame.c (frapy_arch): Implement the method
11251 gdb.Frame.architecture().
11252 (frame_object_methods): Add 'architecture' to the method table.
11253 * python/python-internal.h: Add declarations of new utility
11255 * python/python.c (_initialize_python): Initialize
11256 gdb.Architecture class.
11258 2013-01-23 Doug Evans <dje@google.com>
11260 Work around binutils/15021.
11261 * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
11262 type_unit_group out of union s. All uses updated.
11263 (read_index_from_section): Watch for index version 8.
11264 (follow_die_sig): If using .gdb_index version <= 7, record the TU as
11265 an imported symtab.
11266 (write_psymtabs_to_index): Increment version number to 8.
11268 2013-01-22 Pedro Alves <palves@redhat.com>
11270 * annotate.c (breakpoint_changed): Skip if breakpoint is not
11273 2013-01-22 Pedro Alves <palves@redhat.com>
11275 * annotate.c (annotate_breakpoints_changed): Rename to ...
11276 (annotate_breakpoints_invalid): ... this. Make static.
11277 (breakpoint_changed): Adjust.
11278 (_initialize_annotate): Always install the observers. Install a
11279 "breakpoint_created" observer.
11280 * annotate.h (annotate_breakpoints_changed): Delete declaration.
11281 * breakpoint.c (set_breakpoint_condition)
11282 (breakpoint_set_commands, do_map_commands_command)
11283 (init_raw_breakpoint, clear_command, set_ignore_count)
11284 (enable_breakpoint_disp): No longer call
11285 annotate_breakpoints_changed.
11287 2013-01-22 Pedro Alves <palves@redhat.com>
11289 * annotate.c: Include "inferior.h".
11290 (frames_invalid_emitted)
11291 (breakpoints_invalid_emitted): New globals.
11292 (async_background_execution_p): New function.
11293 (annotate_breakpoints_changed, annotate_frames_invalid): Skip
11294 emitting the annotation if it has already been emitted.
11295 (annotate_display_prompt): New function.
11296 * annotate.h (annotate_display_prompt): New declaration.
11297 * event-top.c: Include annotate.h.
11298 (display_gdb_prompt): Call annotate_display_prompt.
11300 2013-01-22 Pedro Alves <palves@redhat.com>
11302 * annotate.c (ignore_count_changed): Delete.
11303 (annotate_breakpoints_changed): Don't clear ignore_count_changed.
11304 (annotate_ignore_count_change): Delete.
11305 (annotate_stopped): Don't emit a delayed breakpoints-changed
11307 * annotate.h (annotate_ignore_count_change): Delete.
11308 * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
11309 annotate_ignore_count_change.
11311 2013-01-22 Tom Tromey <tromey@redhat.com>
11313 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
11314 require_rvalue for a register location.
11316 2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
11318 * breakpoint.c (print_one_breakpoint_location): Add MI
11319 field 'thread-groups' when printing a breakpoint.
11320 (output_thread_groups): New function.
11322 2013-01-21 Siva Chandra Reddy <sivachandra@google.com>
11324 * python/lib/gdb/commands/explore.py
11325 (CompoundExplorer.explore_expr): Correct the name of a method
11327 (ExploreTypeCommand.invoke): Add a missing 'return'.
11329 2013-01-21 Tom Tromey <tromey@redhat.com>
11331 * gdb_obstack.h (obconcat): Move declaration here, from...
11332 * symfile.h (obconcat): ... here.
11333 * gdb_obstack.c: New file.
11334 (obconcat): Move from...
11335 * symfile.c (obconcat): ... here.
11336 * Makefile.in (SFILES): Add gdb_obstack.c.
11337 (COMMON_OBS): Add gdb_obstack.o.
11339 2013-01-21 Tom Tromey <tromey@redhat.com>
11341 * symfile.h (obsavestring): Don't declare.
11342 * symfile.c (obsavestring): Remove.
11343 * ada-exp.y: Use obstack_copy0, not obsavestring.
11344 * ada-lang.c: Use obstack_copy0, not obsavestring.
11345 * coffread.c: Use obstack_copy0, not obsavestring.
11346 * cp-namespace.c: Use obstack_copy0, not obsavestring.
11347 * dbxread.c: Use obstack_copy0, not obsavestring.
11348 * dwarf2read.c: Use obstack_copy0, not obsavestring.
11349 * jit.c: Use obstack_copy0, not obsavestring.
11350 * mdebugread.c: Use obstack_copy0, not obsavestring.
11351 * psymtab.c: Use obstack_copy0, not obsavestring.
11352 * stabsread.c: Use obstack_copy0, not obsavestring.
11353 * xcoffread.c: Use obstack_copy0, not obsavestring.
11355 2013-01-21 Tom Tromey <tromey@redhat.com>
11357 * dwarf2read.c (fixup_go_packaging): Save package name
11358 on objfile obstack.
11359 * gdbtypes.c (init_type): Don't copy name.
11361 2013-01-21 Tom Tromey <tromey@redhat.com>
11363 * dwarf2read.c (struct partial_die_info) <name, scope>: Now
11365 (struct attribute) <u.str>: Now const.
11366 (struct fnfieldlist) <name>: Now const.
11367 (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
11368 (partial_die_parent_scope): Make return type const.
11369 (partial_die_full_name, add_partial_symbol): Update.
11370 (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
11372 (find_file_and_directory): Make 'name' and 'comp_dir' const.
11373 (read_file_scope, read_func_scope, dwarf2_add_field)
11374 (dwarf2_add_member_fn, read_structure_type)
11375 (process_enumeration_scope, read_array_type, read_module_type)
11376 (read_base_type, read_subrange_type): Update.
11377 (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
11378 (new_symbol_full, guess_full_die_structure_name): Update.
11379 (dwarf2_canonicalize_name): Return const type. Make 'name' const.
11380 (dwarf2_name): Return const type.
11381 (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
11384 2013-01-21 Tom Tromey <tromey@redhat.com>
11386 * gdbtypes.c (init_type): Make 'name' const.
11387 * gdbtypes.h (init_type): Update.
11389 2013-01-21 Tom Tromey <tromey@redhat.com>
11391 * buildsym.c (patch_subfile_names): Use set_last_source_file.
11392 (start_symtab): Make 'name' and 'dirname' const. Use
11393 set_last_source_file.
11394 (restart_symtab, reset_symtab_globals): Use set_last_source_file.
11395 (last_source_file): Define. Now static.
11396 (set_last_source_file, get_last_source_file): New functions.
11397 * buildsym.h (last_source_file): Don't declare.
11398 (start_symtab): Update.
11399 (set_last_source_file, get_last_source_file): Declare.
11400 * coffread.c (complete_symtab): Use set_last_source_file.
11401 (coff_end_symtab): Likewise.
11402 (coff_symtab_read): Use set_last_source_file, get_last_source_file.
11403 * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
11404 set_last_source_file.
11405 (process_one_symbol): Use get_last_source_file.
11406 * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
11407 (psymtab_to_symtab_1): Use get_last_source_file.
11408 * xcoffread.c (process_linenos): Use get_last_source_file.
11409 (complete_symtab): Use set_last_source_file.
11410 (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
11411 (scan_xcoff_symtab): Use set_last_source_file.
11413 2013-01-21 Tom Tromey <tromey@redhat.com>
11415 * symtab.c (struct demangled_name_entry) <mangled>: Now const.
11416 (symbol_set_names): Remove casts. Handle field const-ness.
11418 2013-01-21 Tom Tromey <tromey@redhat.com>
11420 * dwarf2read.c (new_symbol_full): Remove cast.
11421 * symtab.c (symbol_set_demangled_name): Make 'name' const.
11422 * symtab.h (symbol_set_demangled_name): Update.
11424 2013-01-21 Tom Tromey <tromey@redhat.com>
11426 * main.c (captured_main): Call bfd_init.
11428 2013-01-21 Tom Tromey <tromey@redhat.com>
11430 * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
11431 * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
11432 * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
11435 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
11437 * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
11439 2013-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
11441 Fix gdb.fortran/common-block.exp crash in PIE mode.
11442 * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
11444 * f-valprint.c (info_common_command_for_block): Expect
11445 LOC_COMMON_BLOCK in gdb_assert.
11446 * symtab.h (struct general_symbol_info): Update comment for the
11447 common_block member.
11448 (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
11449 (enum address_class): New member LOC_COMMON_BLOCK.
11451 2013-01-18 David Blaikie <dblaikie@gmail.com>
11453 * MAINTAINERS (Write After Approval): Add "David Blaikie".
11455 2013-01-18 Tom Tromey <tromey@redhat.com>
11458 * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
11459 Call require_rvalue.
11461 2013-01-18 Yao Qi <yao@codesourcery.com>
11463 * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
11464 (dbx_read_symtab): New declaration.
11465 (dbx_psymtab_to_symtab): Delete.
11466 (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
11467 Rename parameter PST to SELF. Exchanged two parameters.
11468 (start_psymtab): Caller update.
11469 * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
11470 (dwarf2_read_symtab): New declaration.
11471 (dwarf2_psymtab_to_symtab): Delete.
11472 (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
11473 Rename parameter PST to SELF. Exchanged two parameters.
11474 (create_partial_symtab): Caller update.
11475 * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
11476 (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
11477 Rename parameter PST to SELF. Exchanged two parameters.
11478 (parse_partial_symbols, new_psymtab): Caller update.
11479 * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
11481 * psymtab.c (psymtab_to_symtab): Caller update.
11482 * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
11483 (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
11484 Rename parameter PST to SELF. Exchanged two parameters.
11485 (xcoff_start_psymtab): Caller update.
11487 2013-01-18 Yao Qi <yao@codesourcery.com>
11489 * infrun.c (proceed): Rename local variable 'oneproc' to
11492 2013-01-17 Doug Evans <dje@google.com>
11494 * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
11495 (dw2_build_type_unit_groups): Delete. All uses updated.
11497 * symtab.h (struct symbol_search): Add comment.
11499 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
11501 * symtab.c (compare_filenames_for_search): New comment for
11504 2013-01-17 Tom Tromey <tromey@redhat.com>
11506 * cp-abi.c (cp_abi_completer): Fix typo in assignment.
11508 2013-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
11510 * symtab.c (iterate_over_some_symtabs): New variable cleanups,
11511 initialize it by existing make_cleanup. Call new do_cleanups.
11513 2013-01-17 Tom Tromey <tromey@redhat.com>
11515 * cp-abi.c (cp_abi_completer): New function.
11516 (_initialize_cp_abi): Set completer for "set cp-abi".
11518 2013-01-17 Tom Tromey <tromey@redhat.com>
11520 * mem-break.c: Remove obsolete comment.
11521 * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
11523 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
11525 * jit.c (jit_reader_load_command): Interpret the jit reader name
11526 as an absolute path if it begins with a forward slash.
11528 2012-01-17 Sanjoy Das <sanjoy@playingwithpointers.com>
11532 * jit.c (finalize_symtab): Ensure that only the global block has a
11535 2013-01-17 Pedro Alves <palves@redhat.com>
11537 * acinclude.m4: Include ../config/plugins.m4,
11538 ../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
11539 * Makefile.in (aclocal_m4_deps): Update.
11540 * aclocal.m4: Renegerate.
11542 2013-01-16 Doug Evans <dje@google.com>
11544 * contrib/cc-with-tweaks.sh: Add references to Fission docs.
11546 2013-01-16 Pedro Alves <palves@redhat.com>
11547 Tom Tromey <tromey@redhat.com>
11550 * NEWS: Add "catch signal".
11551 * breakpoint.c (base_breakpoint_ops): No longer static.
11552 (bpstat_explains_signal): New function.
11553 (init_catchpoint): No longer static.
11554 (base_breakpoint_explains_signal): New function.
11555 (base_breakpoint_ops): Initialize new field.
11556 * breakpoint.h (enum bpstat_signal_value): New.
11557 (struct breakpoint_ops) <explains_signal>: New field.
11558 (bpstat_explains_signal): Remove macro, declare as function.
11559 (base_breakpoint_ops, init_catchpoint): Declare.
11560 * break-catch-sig.c: New file.
11561 * inferior.h (signal_catch_update): Declare.
11562 * infrun.c (signal_catch): New global.
11563 (handle_syscall_event): Update for change to
11564 bpstat_explains_signal.
11565 (handle_inferior_event): Likewise. Always handle random signals
11567 (signal_cache_update): Check signal_catch.
11568 (signal_catch_update): New function.
11569 (_initialize_infrun): Initialize signal_catch.
11570 * Makefile.in (SFILES): Add break-catch-sig.c.
11571 (COMMON_OBS): Add break-catch-sig.o.
11573 2013-01-16 Tom Tromey <tromey@redhat.com>
11575 * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
11576 (print_one_catch_solib, print_one_catch_syscall)
11577 (print_one_catch_exec, print_one_exception_catchpoint): Emit
11580 2013-01-16 Yao Qi <yao@codesourcery.com>
11582 * printcmd.c (current_display_number): Make it static.
11584 2013-01-16 Yao Qi <yao@codesourcery.com>
11586 * infcmd.c (step_once): Don't check '!single_inst' as it was
11589 2013-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
11591 * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
11593 2013-01-14 Tom Tromey <tromey@redhat.com>
11595 * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
11597 * command.h (add_setshow_string_noescape_cmd): Update.
11598 * corefile.c (set_gnutarget_command): Remove trailing whitespace.
11599 (complete_set_gnutarget): New function.
11600 (_initialize_core): Set the "set gnutarget" completer.
11602 2013-01-14 Tom Tromey <tromey@redhat.com>
11605 * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
11606 (c_type_print_modifier): Likewise.
11607 * dwarf2read.c (read_tag_restrict_type): New function.
11608 (read_type_die_1): Handle DW_TAG_restrict_type.
11609 * gdbtypes.c (make_restrict_type): New function.
11610 (recursive_dump_type): Handle TYPE_RESTRICT.
11611 * gdbtypes.h (enum type_flag_values): Renumber.
11612 (enum type_instance_flag_value): Add
11613 TYPE_INSTANCE_FLAG_RESTRICT.
11614 (TYPE_RESTRICT): New macro.
11615 (make_restrict_type): Declare.
11617 2013-01-14 Tom Tromey <tromey@redhat.com>
11620 * psymtab.c (struct psymtab_state): New.
11621 (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
11623 * psympriv.h (make_cleanup_discard_psymtabs): Declare.
11624 * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
11626 2013-01-14 Richard Sharman <richard_sharman@mitel.com>
11627 Pedro Alves <palves@redhat.com>
11631 * remote.c (remote_threads_info): Make a copy of the reply from
11632 qfThreadInfo and use that instead of rs->buf.
11634 2013-01-14 Yao Qi <yao@codesourcery.com>
11636 * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
11637 (dbx_psymtab_to_symtab): Likewise.
11638 * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
11639 * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
11640 * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
11642 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
11644 * parse.c (parse_exp_in_context): New variable inner_chain. Call
11645 make_cleanup_restore_current_language. Call set_language. Move
11646 OLD_CHAIN and INNER_CHAIN cleanups.
11647 * utils.c (do_restore_current_language)
11648 (make_cleanup_restore_current_language): New functions.
11649 * utils.h (make_cleanup_restore_current_language): New declaration.
11651 2013-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
11653 * source.c (symtab_to_fullname): Apply rewrite_source_path also for
11654 non-existing files.
11656 * source.c (symtab_to_fullname): Do not prepend DIRNAME for
11657 non-existing files if FILENAME is already absolute.
11659 2013-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
11661 * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
11662 fputs_filtered. Append trailing newline.
11664 2013-01-11 Yao Qi <yao@codesourcery.com>
11665 Stan Shebs <stan@codesourcery.com>
11667 * psymtab.c (init_psymbol_list): Clarify the comment.
11669 2013-01-11 Yao Qi <yao@codesourcery.com>
11671 * breakpoint.c (print_one_breakpoint_location): Remove dead code.
11672 (update_dprintf_command_list): Assert that 'printf_line' is
11673 non-null. Remove condition check.
11675 2013-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
11678 * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
11680 * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
11682 * tui/tui-source.h (tui_source_is_displayed): Likewise.
11684 2013-01-09 Anthony Green <green@moxielogic.com>
11686 * cp-abi.c (cplus_print_vtable): Don't return value from void
11688 * ada-lang.c (re_set_catch_assert): Ditto.
11690 2013-01-09 Doug Evans <dje@google.com>
11692 * symfile.h (quick_symbol_functions): Delete member
11693 pre_expand_symtabs_matching. All uses removed.
11694 * dwarf2read.c (dw2_lookup_symbol): Implement.
11695 (dw2_do_expand_symtabs_matching): Delete.
11696 (dw2_pre_expand_symtabs_matching): Delete.
11697 (struct dw2_symtab_iterator): New type.
11698 (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
11699 (dw2_expand_symtabs_for_function): Rewrite.
11700 (dwarf2_gdb_index_functions): Update.
11701 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
11702 (psym_functions): Update.
11704 2013-01-09 Tom Tromey <tromey@redhat.com>
11706 * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
11707 * configure: Rebuild.
11708 * configure.ac: Add somread.o to the build if BFD has SOM
11710 * somread.c: Include som/aout.h, not syms.h.
11711 (som_symtab_read): Use som_external_symbol_dictionary_record.
11712 Unpack records manually.
11713 (_initialize_somread): Declare.
11715 2012-01-08 Mike Frysinger <vapier@gentoo.org>
11717 * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
11718 Cast return_address to 64bits.
11720 2013-01-08 Hui Zhu <hui_zhu@mentor.com>
11722 * printcmd.c: Remove define of function output_command.
11723 * tracepoint.c: Remove extern of function output_command.
11724 * valprint.h: (output_command): New extern.
11726 2013-01-07 Tom Tromey <tromey@redhat.com>
11728 * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
11730 (objc_language_defn): Use c_printchar, c_printstr,
11733 2013-01-07 Tom Tromey <tromey@redhat.com>
11737 * ada-valprint.c (printstr, print_field_values): Remove
11739 * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
11741 * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
11743 * m2-lang.c (m2_printstr): Remove "inspect_it" code.
11744 * main.c (captured_main): Remove "epoch" argument.
11745 * objc-lang.c (objc_printstr): Remove "inspect_it" code.
11746 * p-lang.c (pascal_printstr): Remove "inspect_it" code.
11747 * p-valprint.c (pascal_object_print_value_fields): Remove
11749 * printcmd.c (print_command_1): Remove 'inspect' argument.
11750 (print_command, call_command): Update.
11751 (inspect_command): Remove.
11752 (_initialize_printcmd): Make "inspect" an alias for "print".
11753 * top.c (epoch_interface): Remove.
11754 * top.h (epoch_interface): Remove.
11755 * valprint.c (user_print_options): Update.
11756 (print_converted_chars_to_obstack): Remove "inspect_it" code.
11757 * valprint.h (struct value_print_options) <inspect_it>: Remove
11760 2013-01-04 Tom Tromey <tromey@redhat.com>
11762 * valprint.h (read_string): Add 'extern'.
11764 2013-01-07 Joel Brobecker <brobecker@adacore.com>
11766 * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
11767 used to decide whether to define darwin_read_dyld_info or not.
11769 2013-01-03 Pierre Muller <muller@sourceware.org>
11771 * main.c (relocate_gdb_directory): Avoid calling stat function
11774 2013-01-03 Yao Qi <yao@codesourcery.com>
11776 * psymtab.c (fixup_psymbol_section): Update declaration.
11777 (fixup_psymbol_section): Remove code returning value.
11779 2013-01-03 Yao Qi <yao@codesourcery.com>
11781 * symtab.h: Remove some out of date comments.
11782 (enum exception_event_kind): Move it ...
11783 * breakpoint.c: ... here.
11785 2013-01-02 Iain Sandoe <developer@sandoe-acoustics.co.uk>
11788 * darwin-nat.c (darwin_read_dyld_info): Only build if
11789 TASK_DYLD_INFO_COUNT is defined.
11790 (darwin_xfer_partial): Call darwin_read_dyld_info only if
11791 TASK_DYLD_INFO_COUNT is defined.
11793 2013-01-02 Tom Tromey <tromey@redhat.com>
11795 * symfile.h (struct ecoff_debug_hack): Remove.
11796 * objfiles.c: Don't include mdebugread.h.
11798 2013-01-02 Tom Tromey <tromey@redhat.com>
11800 * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
11801 * configure.ac: Check for Mach-O support in BFD. Update
11803 * configure: Rebuild.
11805 2013-01-02 Tom Tromey <tromey@redhat.com>
11807 * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
11808 * configure.ac: Use GDB_AC_CHECK_BFD.
11809 * configure: Rebuild.
11811 2013-01-01 Maxim Kuvyrkov <maxim.kuvyrkov@gmail.com>
11813 * MAINTAINERS: Update my email.
11815 2013-01-01 Joel Brobecker <brobecker@adacore.com>
11817 * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
11819 2013-01-01 Joel Brobecker <brobecker@adacore.com>
11821 * rs6000-nat.c (bss_data_overlap): New function.
11822 (vmap_symtab): Use it to adjust the .bss section's offset.
11824 2013-01-01 Joel Brobecker <brobecker@adacore.com>
11826 Update year range in copyright notice of all files.
11828 2013-01-01, 13 Joel Brobecker <brobecker@adacore.com>
11830 * top.c (print_gdb_version): Update copyright year.
11832 For older changes see ChangeLog-2012.
11838 version-control: never