1 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3 * darwin-nat-info.c (darwin_debug_regions_recurse): Use
4 target_gdbarch instead of current_gdbarch.
6 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
8 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
9 (ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
12 * configure.tgt: Add comment.
14 2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
16 * mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
18 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
19 Jan Kratochvil <jan.kratochvil@redhat.com>
21 * NEWS: Document inlined function support.
22 * Makefile.in (SFILES): Add inline-frame.c.
23 (COMMON_OBS): Add inline-frame.o.
24 * block.c (contained_in): Rewrite to use lexical nesting.
25 (block_linkage_function): Skip inlined function blocks.
26 (block_inlined_p): New.
27 * block.h (struct block): Update comment.
28 (block_inlined_p): New prototype.
29 * blockframe.c (get_frame_block): Handle inlined functions.
30 (get_frame_function): Do not use block_linkage_function.
31 (block_innermost_frame): Use get_frame_block and contained_in.
32 * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
33 Skip over inlined functions. Simplify epilogue check.
34 (bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
36 (set_momentary_breakpoint): Only accept non-inlined frames.
37 (watch_command_1): Use frame_unwind_caller_pc and
38 frame_unwind_caller_id instead of get_prev_frame.
39 (until_break_command): Likewise. Use get_stack_frame_id.
40 * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
41 * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
42 * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
43 (read_func_scope, new_symbol): Likewise. Handle arguments specially
44 for inlined functions without call site information.
45 (inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
46 (die_specification): Treat DW_AT_abstract_origin as a specification.
47 (read_type_die): Handle DW_TAG_inlined_subroutine.
48 * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
49 * frame.c (fprint_frame_id): Print inline depth.
50 (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
51 (skip_inlined_frames, get_stack_frame_id): New.
52 (frame_unwind_caller_id): Use skip_inlined_frames.
53 (frame_id_inlined_p): New.
54 (frame_id_eq): Make the logic match the comments. Add inline_depth
56 (frame_id_inner): Handle inlined functions.
57 (frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
58 (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
59 (get_prev_frame_1): Check for inline frames. Split out frame
60 allocation to get_prev_frame_raw.
61 (get_prev_frame_raw): New function.
62 (get_prev_frame): Handle inline frames.
63 (get_frame_pc): Use frame_unwind_pc.
64 (get_frame_address_in_block): Skip inlined frames on both sides.
65 (pc_notcurrent): Delete.
66 (find_frame_sal): Rewrite to handle inline call sites. Use
67 get_frame_address_in_block.
68 (deprecated_update_frame_pc_hack): Make static.
69 * frame.h: Update comments.
70 (struct frame_id): Add inline_depth.
71 (enum frame_type): Add INLINE_FRAME.
72 (frame_id_inlined_p, get_stack_frame_id): New prototypes.
73 * gdbthread.h (struct thread_info): Add step_stack_frame_id field.
74 * infcmd.c (set_step_frame): New function.
75 (step_once): Use set_step_frame. Handle inlined functions.
76 (until_next_command): Use set_step_frame.
77 (finish_backward), finish_forward): Use get_stack_frame_id.
78 (finish_command): Support inlined functions.
79 * inferior.h (set_step_info): New prototype.
80 * infrun.c (RESUME_ALL): Use minus_one_ptid.
81 (clear_proceed_status): Clear step_stack_frame_id.
82 (init_wait_for_inferior): Call clear_inline_frame_state.
83 (init_execution_control_state): Make static.
84 (set_step_info): New function.
85 (init_thread_stepping_state): Do not set the symtab or line here.
86 (stepped_in_from): New function.
87 (handle_inferior_event): Handle inlined functions. Use set_step_info.
88 (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
89 (struct inferior_status): Add step_stack_frame_id.
90 (save_inferior_status, restore_inferior_status): Save and restore
92 * inline-frame.c, inline-frame.h: New files.
93 * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
94 * regcache.c (regcache_write_pc): Call reinit_frame_cache.
95 * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
96 * stack.c (frame_show_address): New.
97 (print_frame_info, print_frame): Use it.
98 (find_frame_funname): Use get_frame_function. Handle inlined blocks.
99 (frame_info): Mark inlined functions.
100 (backtrace_command_1): Use get_current_user_frame.
101 (print_frame_local_vars, print_frame_label_vars): Update comments.
102 (return_command): Refuse inlined functions.
103 * symtab.c (lookup_symbol_aux_local): Stop at inlined function
105 (find_function_start_sal): Avoid inlined functions.
106 (completion_list_add_fields): New function.
107 (default_make_symbol_completion_list): Use it. Use block_static_block
108 and block_global_block. Check for inlined functions.
109 (skip_prologue_using_sal): Avoid line number comparison across
111 * symtab.h (struct symbol): Add is_inlined.
112 (SYMBOL_INLINED): New.
113 * target.c (target_resume): Call clear_inline_frame_state.
114 * valops.c (value_of_variable): Check block_inlined_p.
116 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
118 * frame.c (frame_unwind_id): Renamed to ...
119 (frame_unwind_caller_id): ... this. All callers updated.
120 (frame_pc_unwind): Renamed to ...
121 (frame_unwind_caller_pc): ... this. All callers updated.
122 * frame.h: Document frame_unwind_caller_WHAT functions.
123 (frame_unwind_id): Renamed to ...
124 (frame_unwind_caller_id): ... this.
125 (frame_pc_unwind): Renamed to ...
126 (frame_unwind_caller_pc): ... this.
127 * hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
128 * stack.c (parse_frame_specification_1): Do not rely on
131 2009-06-27 Michael Snyder <msnyder@vmware.com>
133 * infrun.c (handle_inferior_event): Improve handling of
134 reverse-stepping into and over shared library functions.
136 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
138 * linespec.c (find_method): Add new not_found_ptr parameter to
139 bring in line with symtab_from_filename, decode_variable.
140 (decode_compound): Likewise. Also propagate not_found_ptr to
142 (decode_line_1): Propagate not_found_ptr to decode_compound.
143 (cplusplus_error): Now throws NOT_FOUND_ERROR.
145 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
147 * MAINTAINERS (Write After Approval): Add self.
149 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
151 * valops.c (value_one): Reimplement broken decimal-float case.
153 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
155 * eval.c (evaluate_subexp_standard): Use expression architecture
156 instead of current_gdbarch.
158 * infrun.c (handle_inferior_event): Avoid unncessary reference
159 to current_gdbarch and get_current_frame ().
161 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
163 * breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
164 (enum bptype): Add bp_longjmp_master.
166 * breakpoint.c (create_longjmp_master_breakpoint): New function.
167 (update_breakpoints_after_exec): Handle bp_longjmp_master
168 breakpoints. Call create_longjmp_master_breakpoint.
169 (print_it_typical, bpstat_stop_status, bpstat_what,
170 print_one_breakpoint_location, allocate_bp_location, mention,
171 delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
172 (breakpoint_re_set): Call create_longjmp_master_breakpoint.
173 (create_longjmp_breakpoint): Delete.
174 (set_longjmp_breakpoint): Add THREAD argument. Reimplement
175 to install momentary clones of bp_longjmp_master breakpoints.
177 * infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.
179 2009-06-23 Cary Coutant <ccoutant@google.com>
181 * dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
182 Set basic_block to 0 after a special opcode.
184 2009-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
186 Fix a regression by the mmap patch from 2009-06-16.
187 * symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
188 calls before deleting the OBJFILE obstack. Extend the comment.
190 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
192 * jv-lang.h (JAVA_OBJECT_SIZE): Remove.
193 (get_java_object_header_size): Add GDBARCH parameter.
194 * jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
195 Use it instead of current_gdbarch.
196 (evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
197 get_java_object_header_size.
198 * jv-valprint.c (java_value_print): Likewise.
200 2009-06-23 Sami Wagiaalla <swagiaal@redhat.com>
202 * dwarf2read.c (process_die): Handle import statements
203 (DW_TAG_imported_declaration, case DW_TAG_imported_module)
204 (read_import_statement): New.
205 (read_func_scope): Update using_directives to point to current context
206 (read_lexical_block_scope): Ditto.
207 * cp-support.h: Added prototype for cp_add_using.
208 * cp-namespace.c: Removed local context_stack.
209 (cp_initialize_namespace): Deleted.
210 (cp_finalize_namespace): Deleted.
211 (cp_add_using_directive): Use using_directives instead of using_list.
212 (cp_add_using): No longer static.
213 * buildsym.h: Created global using_direct variable.
214 Created using_direct variable in context_stack.
215 * buildsym.c (finish_block): Set using directives for the block under
217 (start_symtab): Removed call to cp_initialize_namespace().
218 (end_symtab): Removed call to cp_finalize_namespace().
219 (push_context): Save and reset using_directives.
220 * block.c (block_using): Return using directives for given
221 block instead of static block.
223 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
225 * target-descriptions.h (struct type): Do not declare.
226 (struct tdesc_type): Declare.
227 (tdesc_named_type): Change return type to struct tdesc_type *.
228 (tdesc_record_type): Remove.
229 (tdesc_create_vector): Add prototype.
230 (tdesc_create_union): Likewise.
231 (tdesc_add_field): Likewise.
233 * target-descriptions.c (struct tdesc_reg): Replace gdb_type
234 member by tdesc_type member.
235 (struct tdesc_type_field, tdesc_type_field): Add type and vector def.
236 (struct tdesc_type, tdesc_type_p): Likewise.
237 (struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
238 (struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
239 (struct tdesc_arch_data): Replace registers member by arch_regs.
241 (tdesc_predefined_types): Change to array of pre-defined
242 struct tdesc_type structures. Add "code_ptr" and "data_ptr".
243 (tdesc_named_type): Return struct tdesc_type * instead of GDB type.
244 (tdesc_gdb_type): New function.
246 (target_find_description): Update for data structure changes.
247 (tdesc_data_cleanup): Likewise.
248 (tdesc_numbered_register): Likewise.
249 (tdesc_use_registers): Likewise.
250 (tdesc_create_reg): Likewise.
252 (tdesc_find_arch_register): New function.
253 (tdesc_find_register): Use it.
254 (tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
255 tdesc_type on demand; cache generated types in tdesc_arch_reg.
257 (tdesc_free_type): New function.
258 (tdesc_free_feature): Call it.
260 (tdesc_create_vector): New function.
261 (tdesc_create_union): Likewise.
262 (tdesc_add_field): Likewise.
263 (tdesc_record_type): Remove.
265 (tdesc_type_id): Remove.
266 (maint_print_c_tdesc_cmd): Update for data structure changes. Update
267 generated code to create tdesc_type structures instead of GDB types.
269 * xml-tdesc.c: Do not include "gdbtypes.h".
270 (struct tdesc_parsing_data): Change type of current_union to
272 (tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
273 (tdesc_start_union): Call tdesc_create_union.
274 (tdesc_start_field): Call tdesc_add_field.
275 (tdesc_start_vector): Call tdesc_create_vector.
276 (tdesc_end_union): Remove.
277 (feature_children): Remove reference to tdesc_end_union.
279 * features/arm-with-iwmmxt.c: Regenerate.
280 * features/mips-linux.c: Regenerate.
281 * features/mips64-linux.c: Regenerate.
282 * features/rs6000/powerpc-32.c: Regenerate.
283 * features/rs6000/powerpc-32l.c: Regenerate.
284 * features/rs6000/powerpc-403.c: Regenerate.
285 * features/rs6000/powerpc-403gc.c: Regenerate.
286 * features/rs6000/powerpc-505.c: Regenerate.
287 * features/rs6000/powerpc-601.c: Regenerate.
288 * features/rs6000/powerpc-602.c: Regenerate.
289 * features/rs6000/powerpc-603.c: Regenerate.
290 * features/rs6000/powerpc-604.c: Regenerate.
291 * features/rs6000/powerpc-64.c: Regenerate.
292 * features/rs6000/powerpc-64l.c: Regenerate.
293 * features/rs6000/powerpc-7400.c: Regenerate.
294 * features/rs6000/powerpc-750.c: Regenerate.
295 * features/rs6000/powerpc-860.c: Regenerate.
296 * features/rs6000/powerpc-altivec32.c: Regenerate.
297 * features/rs6000/powerpc-altivec32l.c: Regenerate.
298 * features/rs6000/powerpc-altivec64.c: Regenerate.
299 * features/rs6000/powerpc-altivec64l.c: Regenerate.
300 * features/rs6000/powerpc-e500.c: Regenerate.
301 * features/rs6000/powerpc-e500l.c: Regenerate.
302 * features/rs6000/powerpc-isa205-32l.c: Regenerate.
303 * features/rs6000/powerpc-isa205-64l.c: Regenerate.
304 * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
305 * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
306 * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
307 * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
308 * features/rs6000/powerpc-vsx32.c: Regenerate.
309 * features/rs6000/powerpc-vsx32l.c: Regenerate.
310 * features/rs6000/powerpc-vsx64.c: Regenerate.
311 * features/rs6000/powerpc-vsx64l.c: Regenerate.
312 * features/rs6000/rs6000.c: Regenerate.
314 2009-06-23 Joel Brobecker <brobecker@adacore.com>
316 * ada-lang.c (decode_packed_array): If the value is a pointer to
317 an array, then use value_ind to dereference it, not ada_value_ind.
318 (ada_template_to_fixed_record_type_1): Handle the case where a
319 dynamic field is an aligner type.
320 (to_fixed_array_type): Add handling for packed array types.
321 (ada_get_base_type): Do not follow the XVS type if the type is
323 (ada_evaluate_subexp): Split a few statements up for clarity
325 <OP_FUNCALL>: Add handling of the case of a packed array that
326 has already been fixed.
328 2009-06-23 Joel Brobecker <brobecker@adacore.com>
330 * ada-lang.c (evaluate_subexp): Delete. Use the version from eval.c.
331 (evaluate_subexp_type): Reimplement using evaluate_subexp.
332 * value.h (evaluate_subexp): Add declaration.
333 * eval.c (evaluate_subexp): Make non-static.
334 * objc-lang.c (print_object_command): Use evaluate_subexp.
336 2009-06-23 Paul Pluzhnikov <ppluzhnikov@google.com>
338 Revert 2009-05-14 breakpoint commit (no longer needed).
339 * breakpoint.h (breakpoint_re_set_objfile): Remove
340 * breakpoint.c (breakpoint_re_set_objfile): Likewise
341 (create_overlay_event_breakpoint): Remove objfile parameter,
342 iterate over all objfiles.
343 * objfiles.c (objfile_relocate): Update.
344 * symfile.c (new_symfile_objfile): Likewise.
346 2009-06-23 Tom Tromey <tromey@redhat.com>
349 * c-lang.c (classify_type): Iterate over typedefs.
350 * c-valprint.c (textual_element_type): Iterate over typedefs.
352 2009-06-22 Tristan Gingold <gingold@adacore.com>
354 * darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
357 2009-06-22 Jan Kratochvil <jan.kratochvil@redhat.com>
360 * buildsym.c (block_compar): New function.
361 (end_symtab): Replace the bubble sort by a qsort based code.
363 2009-06-22 Sami Wagiaalla <swagiaal@redhat.com>
365 * MAINTAINERS (Write After Approval): Add self.
367 2009-06-22 Ulrich Weigand <uweigand@de.ibm.com>
369 * spu-tdep.c (spu_get_longjmp_target): New function.
370 (spu_gdbarch_init): Install it.
372 2009-06-22 H.J. Lu <hongjiu.lu@intel.com>
375 * remote.c (getpkt_or_notif_sane_1): Initialize val to -1.
377 2009-06-21 Michael Snyder <msnyder@vmware.com>
379 * inferior.h: Update ancient comment.
381 2009-06-20 Aleksandar Ristovski <aristovski@qnx.com>
382 Pedro Alves <pedro@codesourcery.com>
384 * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
386 (scan_dyntag): Skip if input bfd isn't elf flavoured.
387 (locate_base): Call elf_locate_base even without an exec_bfd.
389 2009-06-19 Samuel Bronson <naesten@gmail.com>
392 * cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
393 for prefix commands to avoid duplicates in the output.
395 2009-06-19 Samuel Bronson <naesten@gmail.com>
398 * cli/cli-decode.c (apropos_cmd): Fix avoidance of double
401 2009-06-19 Jerome Guitton <guitton@adacore.com>
403 * breakpoint.c (expand_line_sal_maybe): When explicit_line,
404 skip prologue on each sals.
405 (skip_prologue_sal): Return explicit_line and explicit_pc
408 2009-06-19 Tristan Gingold <gingold@adacore.com>
410 * darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
413 2009-06-19 Tristan Gingold <gingold@adacore.com>
414 * machoread.c (macho_symtab_read): Adjust for bfd changes.
415 * darwin-nat.h (struct darwin_exception_msg): New type to describe
417 (struct private_thread_info): New type to describe the state of the
419 (DEF_VEC_I thread_t): Removed, replaced by ...
420 (DEF_VEC_O darwin_thread_t): ... this new type.
421 (struct darwin_inferior): Renamed to ...
422 (struct private_inferior): ... this type. Fields added.
423 (darwin_not_port): Moved into the private inferior structure.
424 * darwin-nat.c: Add includes, improve comments.
425 Rewrite to handle multiple threads and processes.
426 (darwin_resume_to): New function and protype.
427 (darwin_resume, darwin_wait_to, darwin_wait): Ditto.
428 (darwin_kill_inferior): Add ops argument.
429 (darwin_pid_to_str): New function.
430 (darwin_thread_alive): Ditto.
431 (darwin_inf, darwin_not_port): Removed.
432 (darwin_inf_fake_stop): New variable.
433 (msgin, msgout, msg_state, exc_msg): Removed.
434 (mach_check_error): Use warning instead of error.
435 (darwin_ptrace): Adjust debug level.
436 (cmp_thread_t): Fix names (typo).
437 (darwin_check_new_threads): Argument is now an inferior,
438 adjust for new structures, add no change check, ignore dead ports,
439 handle first thread case.
440 (find_inferior_task_it): New function.
441 (find_inferior_notify_it): Ditto.
442 (darwin_find_inferior_by_task): Ditto.
443 (darwin_find_inferior_by_notify): Ditto.
444 (darwin_find_thread): Ditto.
445 (darwin_suspend_inferior): Ditto.
446 (darwin_resume_inferior): Ditto.
447 (catch_exception_raise_state): Removed.
448 (catch_exception_raise_state_identity): Removed.
449 (darwin_suspend_inferior_it): New function.
450 (darwin_resume_inferior_it): Ditto.
451 (darwin_dump_message): New function, extracted from darwin_wait.
452 (darwin_decode_exception_message): New function.
453 (darwin_encode_reply): New function.
454 (catch_exception_raise): Removed.
455 (darwin_send_reply): New function, extracted from darwin_resume.
456 (darwin_resume_thread): New function, extracted from darwin_resume.
457 (struct resume_inferior_threads_param): New type.
458 (darwin_resume_inferior_threads_it): New function.
459 (darwin_resume_inferior_threads): New function.
460 (darwin_suspend_inferior_threads): New function.
461 (darwin_resume): Mostly rewritten to handle multiple threads and
463 (darwin_decode_message): New function extracted from darwin_wait.
464 (cancel_breakpoint): New function.
465 (darwin_wait): Mostly rewritten. Handle multiple threads.
466 (darwin_mourn_inferior): Adjust for per process structures.
467 (darwin_reply_to_all_pending_messages): New function.
468 (darwin_stop_inferior): Adjust for per inferior structures.
469 (darwin_attach_pid): Ditto.
470 (darwin_init_thread_list): Ditto.
471 (darwin_attach): Ditto.
472 (darwin_detach): Ditto.
473 (darwin_files_info): Now empty.
474 (darwin_pid_to_str): Adjust returns string to match one expected by
476 (darwin_read_write_inferior): Rename err variable to match other uses.
477 Adjust debug message. Handle submaps.
478 (darwin_xfer_memory): Adjust for per inferior structures.
479 (set_enable_mach_exceptions): Ditto.
480 (darwin_pid_to_exec_file): New function.
481 (darwin_get_ada_task_ptid): Ditto.
482 (darwin_supports_multi_process): Ditto.
483 (_initialize_darwin_inferior): Remove useless assertion, adjust for
484 per inferior structures. Add new target operations.
486 2009-06-18 Hui Zhu <teawater@gmail.com>
487 Michael Snyder <msnyder@vmware.com>
489 * infrun.c (handle_inferior_event): Improve reverse stepping
490 through function epilogue.
492 * infrun.c (handle_inferior_event): Reverse-next through
495 2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
497 * dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
500 2009-06-17 Tom Tromey <tromey@redhat.com>
502 * dwarf2read.c (zlib_decompress_section): Use a cleanup.
504 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
506 * gdbarch.sh (pointer_to_address): Change to type 'm'.
507 (address_to_pointer): Likewise.
508 * gdbarch.c, gdbarch.h: Regenerate.
510 * inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
511 (signed_pointer_to_address): Likewise.
512 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
513 * findvar.c (unsigned_pointer_to_address): Likewise.
514 (signed_pointer_to_address): Likewise.
515 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
517 * avr-tdep.c (avr_address_to_pointer): Likewise.
518 (avr_pointer_to_address): Likewise.
519 * iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
520 (iq2000_address_to_pointer): Likewise.
521 * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
522 (m32c_m16c_pointer_to_address): Likewise.
523 * spu-tdep.c (spu_pointer_to_address): Likewise.
524 * xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
525 (xstormy16_address_to_pointer): Likewise.
527 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
529 * printcmd.c (print_scalar_formatted): Always truncate
532 * cli-dump.c (struct callback_data): Change type of load_offset
534 (restore_binary_file): Update type casts.
535 (restore_command): Parse load_offset as address, not long.
537 * utils.c (string_to_core_addr): Do not sign-extend value.
538 * varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
539 before comparing against requested frame address.
541 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
543 * gdbarch.sh (gcore_bfd_target): New gdbarch callback.
544 * gdbarch.h, gdbarch.c: Regenerate.
546 * gcore.c (default_gcore_target): Make return value const.
547 Call gdbarch_gcore_bfd_target if present.
548 (default_gcore_arch, default_gcore_mach): Use target_gdbarch.
550 * corelow.c (core_read_description): Call gdbarch_core_read_description
551 on core_gdbarch instead of current_gdbarch.
553 * ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
555 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
557 * gdbtypes.c (create_string_type): Receive character type as argument.
558 * gdbtypes.h (create_string_type): Add character type argument.
559 * dwarf2read.c (read_tag_string_type): Pass character type to
562 * value.h (value_string): Add character type argument.
563 * valops.c (value_string): Add character type argument. Pass it to
564 create_string_type. Do not allocate space in inferior.
565 * valarith.c (value_concat): Pass character type to value_string.
567 * value.h (value_typed_string): Rename to ...
568 (value_cstring): ... this.
569 * valops.c (value_typed_string): Rename to ...
570 (value_cstring): ... this.
571 * c-lang.c (evaluate_subexp_c): Update.
573 * python/python-value.c (builtin_type_pychar): New define.
574 (convert_value_from_python): Call value_cstring instead
575 of value_from_string.
576 * value.c (value_from_string): Remove.
577 * value.h (value_from_string): Remove.
579 * eval.c (evaluate_subexp_standard): Pass character type to
580 value_string. Pass expression architecture to value_nsstring
581 and lookup_child_selector.
582 * objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
583 (lookup_child_selector): Likewise.
584 (value_nsstring): Likewise.
585 * objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
586 Pass character type to value_string..
587 (lookup_child_selector): Likewise.
588 (value_nsstring): Add GDBARCH parameter, use it instead of
589 objfile architecture. Pass architecture to lookup_objc_class
590 and lookup_child_selector. Pass character type to value_string.
591 (end_msglist): Pass architecture to lookup_objc_class.
592 * objc-exp.y: Pass architecture to lookup_objc_class.
594 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
596 * gdbtypes.h (struct language_defn): Add forward declaration.
597 (lookup_typename): Add LANGUAGE and GDBARCH parameters.
598 (lookup_unsigned_typename): Likewise.
599 (lookup_signed_typename): Likewise.
600 * gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
601 Use them instead of current_language and current_gdbarch.
602 (lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
603 Pass them to lookup_typename.
604 (lookup_signed_typename): Likewise.
606 * c-exp.y: Pass parse_language and parse_gdbarch to
607 lookup_unsigned_typename and lookup_signed_typename.
608 * objc-exp.y: Likewise.
609 * m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
611 * c-lang.c (evaluate_subexp_c): Pass expression language and
612 gdbarch to lookup_typename.
613 * printcmd.c (printf_command): Pass current language and
614 gdbarch to lookup_typename.
615 * python/python-type.c (typy_lookup_typename): Likewise.
616 Include "language.h".
618 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
620 * sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
621 Use it instead of current_gdbarch. Pass architecture to
622 sparc32_gregset_supplies_p.
623 (sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
624 of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
625 * sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
626 sparc64nbsd_fpregset_supplies_p): Likewise.
627 * sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
628 Add GDBARCH parameter.
629 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
630 (sparc_fetch_inferior_registers): Pass regcache architecture to
631 sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
632 (sparc_store_inferior_registers): Likewise.
633 * sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
634 Add GDBARCH parameter.
635 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
637 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
639 * ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
641 * aix-thread.c (pd_enable): Likewise.
642 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
643 * bsd-uthread.c (bsd_uthread_activate): Likewise.
644 * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
645 * linux-thread-db.c (enable_thread_event): Likewise.
646 * monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
647 * nto-procfs.c (procfs_open): Likewise.
648 * procfs.c (invalidate_cache, procfs_insert_watchpoint,
649 info_proc_mappings, info_mappings_callback): Likewise.
650 * record.c (record_open): Likewise.
651 * rs6000-nat.c (ARCH64): Likewise.
652 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
653 (darwin_bfd_open): Likewise.
654 * memattr.c (mem_info_command): Likewise.
656 * windows-nat.c (win32_resume): Use current regcache architecture
657 instead of current_gdbarch.
659 * dbug-rom.c (dbug_regname): Remove check against number of
660 registers in current_gdbarch.
661 * solib-pa64.c (read_dynamic_info): Remove unused variable.
663 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
665 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
666 use it instead of current_gdbarch.
667 * frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
668 * arm-tdep.c (arm_skip_prologue): Pass architecture to
669 deprecated_pc_in_call_dummy.
671 * symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
672 Use it instead of current_gdbarch.
673 * symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
674 * breakpoint.c (expand_line_sal_maybe): Pass architecture to
675 skip_prologue_using_sal.
676 * arm-tdep.c (skip_prologue_using_sal): Likewise.
677 * lm32-tdep.c (lm32_skip_prologue): Likewise.
678 * m32-tdep.c (m32c_skip_prologue): Likewise.
679 * mips-tdep.c (mips_skip_prologue): Likewise.
680 * moxie-tdep.c (moxie_skip_prologue): Likewise.
681 * mt-tdep.c (mt_frame_unwind_cache): Likewise.
682 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
683 * frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
684 it to skip_prologue_using_sal. Update call sites ...
685 (frv_skip_prologue, frv_frame_unwind_cache): ... here.
687 * mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
688 (check_for_saved): Use it instead of current_gdbarch.
689 (mn10300_analyze_prologue): Set it.
691 * value.c (using_struct_return): Add GDBARCH parameter. Use it
692 instead of current_gdbarch.
693 * value.h (using_struct_return): Add GDBARCH parameter.
694 * eval.c (evaluate_subexp_standard): Pass architecture to
696 * infcall.c (call_function_by_hand): Likewise.
697 * stack.c (return_command): Likewise.
698 * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
700 * symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
702 * symtab.h (in_prologue): Add GDBARCH parameter.
703 * infrun.c (handle_inferior_event): Pass architecture to in_prologue.
705 * eval.c (evaluate_subexp_standard): Use expression architecture
706 instead of current_gdbarch.
708 * c-lang.c (evaluate_subexp_c): Use expression architecture and
709 language instead of current_gdbarch and current_language.
711 * printcmd.c (do_one_display): Use expression architecture instead
714 * infcmd.c (print_return_value): Use architecture of stop_regcache
715 instead of current_gdbarch.
716 (print_vector_info, print_float_info): Remove GDBARCH argument,
717 use frame architecture instead.
718 (vector_info, float_info): Update calls.
720 * objc-lang.c (objc_skip_trampoline): Use frame architecture
721 instead of current_gdbarch.
723 * parse.c (write_dollar_variable): Use parse architecture instead
726 * source.c (line_info): Use objfile architecture instead of
729 * symtab.c (find_function_start_sal): Use gdbarch instead of
731 (print_msymbol_info): Use objfile architecture instead of
734 * valops.c (value_assign): Use frame architecture instead of
737 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
739 * buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
741 * coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
743 (enter_linenos): Likewise.
744 * dbxread.c (process_one_symbol): Likewise.
745 * dwarf2read.c (dwarf_decode_lines): Likewise.
746 * mdebugread.c (psymtab_to_symtab_1): Likewise.
747 * xcoffread.c (enter_line_range): Likewise.
749 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
751 * ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
752 architecture instead of current_gdbarch.
753 (gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
754 (gen_expr): Pass expression to get_struct_ref.
756 * symtab.h (struct symbol_ops): Add GDBARCH parameter to
757 tracepoint_var_ref callback.
758 * ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
759 symbol operation callback.
760 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
761 Use it instead of current_gdbarch.
762 (locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
763 dwarf2_tracepoint_var_ref.
764 (loclist_tracepoint_var_ref): Likewise.
766 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
768 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
769 Use it instead of address bits of current_gdbarch.
770 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
771 * arm-tdep.c (thumb_analyze_prologue): Pass address bits to
773 (arm_scan_prologue): Likewise.
774 * m32c-tdep.c (m32c_analyze_prologue): Likewise.
775 * mep-tdep.c (mep_analyze_prologue): Likewise.
776 * mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
777 * s390-tdep.c (s390_analyze_prologue): Likewise.
779 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
781 * mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
782 frame architecture instead of current_gdbarch.
783 (mi_cmd_data_list_changed_registers): Likewise.
784 (mi_cmd_data_list_register_values): Likewise. Pass selected
785 frame to get_register.
786 (get_register): Add FRAME argument, use it as frame to retrieve
787 registers from (instead of selected frame). Use frame architecture
788 instead of current_gdbarch.
789 (mi_cmd_data_write_register_values): Use current regcache
790 architecture instead of current_gdbarch.
792 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
794 * tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
795 use frame architecture instead. Replace current_gdbarch uses.
796 (tui_show_registers): Update call.
797 (tui_get_register): Remove GDBARCH parameter; use frame architecture
799 (tui_show_register_group): Update call.
800 (tui_check_register_values): Likewise.
801 (tui_register_format): Remove GDBARCH parameter; use frame
802 architecture instead. Replace current_gdbarch uses.
803 (tui_get_register): Update call.
805 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
807 * gdbarch.sh (construct_inferior_arguments): Remove.
808 * gdbarch.c, gdbarch.h: Regenerate.
809 * infcmd.c (get_inferior_args): Call construct_inferior_arguments
810 directly instead of gdbarch_construct_inferior_arguments.
811 (construct_inferior_arguments): Remove GDBARCH argument.
812 * inferior.h (construct_inferior_arguments): Likewise.
814 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
816 * symfile.c (section_is_mapped): Use objfile architecture instead
818 (TARGET_LONG_BYTES): Remove.
819 (read_target_long_array): Add SIZE argument. Use it instead of
821 (simple_read_overlay_table): Retrieve long size from objfile
822 architecture; pass it to read_target_long_array.
823 (simple_read_overlay_region_table): Likewise.
824 (simple_overlay_update_1): Likewise.
826 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
828 * infrun.c (cleanup_displaced_step_closure): Remove.
829 (displaced_step_clear_cleanup): Move to before displaced_step_prepare.
830 (displaced_step_prepare): Use displaced_step_clear_cleanup instead
831 of cleanup_displaced_step_closure.
832 (handle_inferior_event, keep_going): Use thread architecture instead
835 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
837 * infrun.c (handle_inferior_event): Use current frame architecture
838 or thread architecture instead of current_gdbarch. Pass to
839 handle_step_into_function and handle_step_into_function_backward.
840 (handle_step_into_function): Add GDBARCH parameter. Use it instead
842 (handle_step_into_function_backward): Likewise.
843 (insert_step_resume_breakpoint_at_frame): Use frame architecture
844 instead of current_gdbarch.
845 (insert_step_resume_breakpoint_at_caller): Likewise.
847 2009-06-17 Pierre Muller <muller@ics.u-strasbg.fr>
848 Pedro Alves <pedro@codesourcery.com>
850 * infcmd.c (post_create_inferior): Call breakpoint_re_set after target
851 is pushed for watchpoint promotion to hardware watchpoint.
853 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
855 * dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
856 (dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
857 (dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
858 (dwarf_ranges_section, dwarf_frame_section)
859 (dwarf_eh_frame_section): Removed.
860 (dwarf2_resize_section): Likewise.
861 (dwarf2_read_section): Now static, use bfd_mmap() if possible.
862 (dwarf2_get_section_info): New function.
863 (munmap_section_buffer): Likewise.
864 (dwarf2_per_objfile_cleanup): Likewise.
865 (section_is_p): Signature change.
866 * dwarf2-frame.c (dwarf2_build_frame_info): Use
867 dwarf2_get_section_info instead of dwarf2_read_section.
869 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
871 * solib.c (symbol_add_stub): New FLAGS parameter.
872 (solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
874 (solib_add): Defer breakpoint_re_set until after all solibs.
875 * bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
876 * rs6000-nat.c (objfile_symbol_add): Adjust.
877 * symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
878 (new_symfile_objfile): Likewise.
879 (symbol_file_add_with_addrs_or_offsets): Likewise.
880 (symbol_file_add_from_bfd): Likewise.
881 (symbol_file_add): Likewise.
882 * symfile.h (enum symfile_add_flags): New. Adjust prototypes.
883 * symfile-mem.c (symbol_file_add_from_memory): Adjust.
884 * windows-nat.c (safe_symbol_file_add_stub): Adjust.
885 * machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
887 2009-06-16 Keith Seitz <keiths@redhat.com>
889 * linespec.c (collect_methods): Delete.
890 (add_matching_methods): Reove destructor special case.
891 (find_method): Call find_methods directly instead of
893 * valops.c (value_struct_elt): Remove destructor
895 (check_field): Likewise.
896 (value_struct_elt_for_reference): Likewise.
897 (destructor_name_p): Remove misleading comment about dtors
898 being "special cases".
899 * gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
900 * gdbtypes.c (get_destructor_fn_field): Likewise.
902 2009-06-16 Pedro Alves <pedro@codesourcery.com>
904 * mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
905 TARGET_OJECT_MEMORY reads to the topmost target, not to the
906 flattened current_target.
908 2009-06-16 Tristan Gingold <gingold@adacore.com>
910 * avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
912 (avr_register_name): Add const to register_names.
913 (avr_scan_arg_moves): Move inside avr_scan_prologue.
914 (avr_scan_prologue): Add pc_end argument.
915 Only read prologue bytes that can be read.
916 Limit the scan to the known prologue length.
917 Makes pattern variables static and const.
919 (avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
921 (avr_breakpoint_from_pc): Constify avr_break_insn.
922 (avr_extract_return_value): Fix function comment.
923 (avr_frame_unwind_cache): Fix GNU style violations.
924 Pass current_pc argument to avr_scan_prologue to stop prologue
925 analysis to the current pc. This fixes the bug with the 'next'
927 Correctly set the SP register of the previous frame (use call_length).
928 (avr_frame_prev_register): Fix indentation.
929 Correctly read PC from the stack on avr6 architectures.
930 (avr_push_dummy_call): Fix indentation.
931 (avr_gdbarch_init): Set call_length according to the architecture.
933 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
935 * infcall.c (show_unwind_on_terminating_exception_p): New
937 (call_function_by_hand): Create breakpoint and clean-up call for
938 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
939 gate. Pop frame on breakpoint hit.
940 (_initialize_infcall): Add add_setshow_boolean_cmd for
941 unwind-on-terminating-exception.
943 2009-06-12 Kevin Buettner <kevinb@redhat.com>
945 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
946 `has_section_at_zero' flag from stripped objfile to separate,
947 debug info only, objfile.
949 2009-06-12 Pedro Alves <pedro@codesourcery.com>
951 * exec.h (section_table_xfer_memory_partial): Improve description,
952 mention SECTION_NAME.
953 * exec.c (section_table_xfer_memory_partial): Remove stale
956 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
958 * nto-tdep.h (nto_generic_supply_gpregset)
959 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
960 * nto-tdep.c (nto_generic_supply_gpregset)
961 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
963 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
965 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
966 (i386nto_sigcontext_addr): Change the way context address is calculated.
967 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
968 sc_sp_offset and set sc_reg_offset and sc_num_regs.
970 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
972 * i386-nto-tdep.c (i386_nto_target): Remove definition.
973 (init_i386nto_ops): Use macros to set fields to global
974 current_nto_target directly.
975 (i386nto_init_abi): Remove unused nto_set_target call.
976 * nto-tdep.h (nto_set_target): Remove unused declaration.
977 * nto-tdep.c (nto_set_target): Remove unused function.
979 2009-06-11 Pedro Alves <pedro@codesourcery.com>
981 * breakpoint.c (break_command_really): Rename local variable
982 breakpoint_chain to bkpt_chain.
984 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
986 Add support for XMM registers.
987 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
988 (i386nto_register_area): Correctly calculate offsets and sizes for
989 all supported registers.
991 2009-06-11 Tom Tromey <tromey@redhat.com>
993 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
994 'static' from local variable definitions.
996 2009-06-11 Pedro Alves <pedro@codesourcery.com>
998 * symtab.c (append_expanded_sal): Remove unused local variables.
1000 2009-06-11 Pedro Alves <pedro@codesourcery.com>
1002 * infrun.c (sched_multi): New global.
1003 (resume): If sched_multi is set, resume only threads of the
1005 (prepare_to_proceed): Don't switch over to wait_ptid if we're
1006 resuming a different inferior, and sched_multi is off.
1007 (show_schedule_multiple): New.
1008 (_initialize_infrun): Register new "set schedule-multiple" command.
1009 * inferior.h (sched_multi): Declare.
1010 * NEWS: Mention new "schedule-multiple" setting.
1012 2009-06-11 Pedro Alves <pedro@codesourcery.com>
1014 * varobj.c (varobj_create): Properly restore the selected frame.
1016 2009-06-05 Tom Tromey <tromey@redhat.com>
1018 * inferior.c (print_inferior): Make a table, not a list. Emit
1021 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
1023 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
1024 darwin_wait (blocking wait).
1025 (darwin_kill_inferior): Likewise.
1027 2009-06-10 Pedro Alves <pedro@codesourcery.com>
1029 * infrun.c (handle_inferior_event): Update comment around trying
1030 to revert back to a stepping thread that has exited.
1032 2009-06-10 Cary Coutant <ccoutant@google.com>
1034 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
1035 DW_LNE_set_discriminator.
1037 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
1039 * breakpoint.c: ARI fixes.
1040 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
1041 (print_one_breakpoint_location): Likewise.
1042 (create_longjmp_breakpoint): Likewise.
1043 (tracepoint_save_command): Likewise
1044 (bpstat_find_step_resume_breakpoint): No operator at end of line.
1045 (bpstat_stop_status): Likewise.
1046 (describe_other_breakpoints): Likewise.
1047 (hw_watchpoint_used_count): Likewise.
1048 (expand_line_sal_maybe): Likewise.
1049 (break_command_really): Likewise.
1050 (delete_command): Likewise.
1051 (do_enable_breakpoint): Likewise.
1052 (delete_trace_command): Likewise.
1053 (catch_exception_command_1): Likewise and remove extra parentheses.
1055 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
1057 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
1058 "ubreak" command that does not exist.
1060 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
1062 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
1064 2009-06-07 Pedro Alves <pedro@codesourcery.com>
1066 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
1068 2009-06-07 Pedro Alves <pedro@codesourcery.com>
1071 * proc-utils.h (procfs_first_available): Don't declare here.
1072 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
1074 * procfs.c: Include procfs.h.
1075 (procfs_target): Make it public. Don't register
1076 procfs_can_use_hw_breakpoint here.
1077 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
1078 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
1079 (procfs_can_use_hw_breakpoint): Remove check of
1080 TARGET_HAS_HARDWARE_WATCHPOINTS.
1081 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
1083 (_initialize_procfs): Don't add the procfs target here.
1085 * i386-sol2-nat.c: Include target.h and procfs.h.
1086 (_initialize_amd64_sol2_nat): Install the procfs target here,
1087 customized with watchpoints support.
1088 * irix5-nat.c: Include target.h.
1089 (_initialize_core_irix5): Rename to ...
1090 (_initialize_irix5_nat): ... this. Install the procfs target
1091 here, customized with watchpoints support.
1092 * alpha-nat.c: Include procfs.h.
1093 (_initialize_core_alpha): Rename to...
1094 (_initialize_alpha_nat): ... this. Install the procfs target
1095 here, customized with watchpoints support.
1096 * sparc-sol2-nat.c: Include target.h and procfs.h.
1097 (_initialize_sparc_sol2_nat): New.
1099 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
1100 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
1101 * config/mips/irix5.mh (NAT_FILE): Delete.
1102 * config/mips/irix6.mh (NAT_FILE): Delete.
1103 * config/mips/nm-irix5.h: Delete.
1105 20009-06-07 Pedro Alves <pedro@codesourcery.com>
1107 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
1108 to enum target_object. Cleanup comments.
1109 * auxv.h: Include "target.h". Cleanup comments to not mention
1110 NATIVE_XFER_AUXV anymore.
1112 2009-06-07 Pedro Alves <pedro@codesourcery.com>
1114 * inferior.h (procfs_first_available): Move declaration to...
1115 * proc-utils.h: ... here.
1116 * sol-thread.c: Include procfs.h and proc-utils.h.
1118 2009-06-07 Pedro Alves <pedro@codesourcery.com>
1120 * inferior.h (proc_iterate_over_mappings): Delete declaration.
1121 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
1122 * procfs.c (proc_iterate_over_mappings): Delete.
1124 2009-06-07 Pedro Alves <pedro@codesourcery.com>
1126 * target.h (struct target_ops): Make to_has_all_memory,
1127 to_has_memory, to_has_stack, to_has_registers and to_has_execution
1128 methods instead of variables.
1129 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
1130 (target_has_registers_1, target_has_execution_1): Declare
1132 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
1133 (target_has_memory): Rewrite to call target_has_memory_1.
1134 (target_has_stack): Rewrite to call target_has_all_stack_1.
1135 (target_has_registers): Rewrite to call target_has_registers_1.
1136 (target_has_execution): Rewrite to call target_has_execution_1.
1137 (default_child_has_all_memory, default_child_has_memory)
1138 (default_child_has_stack, default_child_has_registers)
1139 (default_child_has_execution): Declare.
1140 (target_mark_running, target_mark_exited): Delete declarations.
1141 * target.c (default_child_has_all_memory,
1142 default_child_has_memory, default_child_has_stack,
1143 default_child_has_registers, default_child_has_execution): New.
1144 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
1145 target_has_registers_1, target_has_execution_1): New.
1146 (add_target): Default the to_has_all_memory, to_has_all_memory,
1147 to_has_memory, to_has_stack, to_has_registers and to_has_execution
1148 callbacks to return 0.
1149 (update_current_target): Do not inherit to_has_all_memory,
1150 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
1151 (target_mark_running, target_mark_exited): Delete.
1152 (memory_xfer_partial): Adjust.
1153 (target_read_memory, target_write_memory, target_search_memory):
1154 Dispatch to the the top-most target, not the flattened
1156 (target_info): Adjust.
1157 (init_dummy_target): Install return_zero as callback for
1158 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
1160 (set_maintenance_target_async_permitted): Use have_live_inferiors
1161 instead of target_has_execution.
1162 * target-memory.c (target_write_memory_blocks): Dispatch memory
1163 writes to the the top-most target, not the flattened
1166 * breakpoint.c (insert_breakpoints): Don't check for
1167 target_has_execution here.
1168 (update_global_location_list): Check if there are live inferiors
1169 to debug instead of target_has_execution.
1170 * infcmd.c (kill_command, detach_command): Check if there are
1171 inferiors instead of target_has_execution.
1172 * inferior.h (have_live_inferiors): Declare.
1173 * inferior.c (have_live_inferiors): New.
1174 * infrun.c (normal_stop): Don't check for target_has_execution to
1175 finish the thread states.
1176 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
1177 (any_running, is_executing): Remove checks for
1178 target_has_execution.
1179 * top.c (kill_or_detach): Don't try to kill core inferiors.
1180 (quit_target): Don't check for target_has_execution.
1182 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
1184 (init_core_ops): Install core_has_memory, core_has_stack and
1186 * exec.c (exec_has_memory): New.
1187 (init_exec_ops): Install exec_has_memory.
1188 * remote.c (remote_add_inferior): Don't call target_mark_running.
1189 (remote_start_remote): Don't call target_mark_exited or call
1190 target_mark_running.
1191 (remote_open_1): Use have_inferiors instead of
1192 target_has_execution. Don't use target_mark_exited.
1193 (init_remote_ops): Install deafult_child_has_all_memory,
1194 default_child_has_memory, default_child_has_stack,
1195 default_child_has_registers, default_child_has_execution.
1196 * bsd-kvm.c (bsd_kvm_return_one): New.
1197 (bsd_kvm_add_target): Register bsd_kvm_return_one as
1198 to_has_memory, to_has_stack and to_has_registers callbacks.
1199 * remote-m32r-sdi.c (m32r_return_one): New.
1200 (init_m32r_ops): Register it.
1201 * inf-child.c (inf_child_target): Adjust to register
1202 default_child_has_all_memory, default_child_has_memory,
1203 default_child_has_stack, default_child_has_registers,
1204 default_child_has_execution callbacks.
1205 * gnu-nat.c (init_gnu_ops): Likewise.
1206 * go32-nat.c (init_go32_ops): Likewise.
1207 * hpux-thread.c (init_hpux_thread_ops): Likewise.
1208 * monitor.c (init_base_monitor_ops): Likewise.
1209 * nto-procfs.c (init_procfs_ops): Likewise.
1210 * remote-mips.c (_initialize_remote_mips): Likewise.
1211 * windows-nat.c (init_windows_ops): Likewise.
1212 * remote-sim.c (gdbsim_create_inferior): Don't use
1213 target_mark_running or target_mark_exited.
1214 (gdbsim_mourn_inferior): Don't call target_mark_exited.
1215 (init_gdbsim_ops): Adjust to register
1216 default_child_has_all_memory, default_child_has_memory,
1217 default_child_has_stack, default_child_has_registers,
1218 default_child_has_execution callbacks.
1220 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
1221 there's no inferior selected, defer to a lower stratum.
1223 2009-06-05 Tom Tromey <tromey@redhat.com>
1225 * varobj.c (update_dynamic_varobj_children): Wrap error text in
1227 (install_visualizer): Likewise.
1228 (varobj_set_visualizer): Likewise.
1230 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
1232 * mi/mi-main.c (mi_cmd_exec_continue)
1233 (mi_cmd_exec_interrupt): Adjust parsing of thread group
1234 ids to current reality, where they don't have any 'p' prefix.
1236 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
1238 * corelow.c (core_open): Check for core_gdbarch before calling
1239 gdbarch_target_signal_from_host.
1241 2009-06-05 Tom Tromey <tromey@redhat.com>
1243 * c-exp.y (parse_number): Don't use K&R definition.
1245 (yyerror): Likewise.
1247 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1249 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
1251 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
1253 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
1254 * ax-gdb.c (gen_var_ref): Likewise.
1255 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
1256 * printcmd.c (address_info): Likewise.
1257 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
1258 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
1259 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
1260 * dwarf2loc.h: Likewise.
1261 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
1263 * symtab.h: (struct symbol_register_ops): New struct definition.
1264 (struct symbol): Make "ops" member a union of symbol_computed_ops and
1265 symbol_register_ops callback pointers.
1266 (SYMBOL_REGISTER_OPS): New macro.
1267 * tracepoint.c: Include "objfiles.h".
1268 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
1269 callback to retrieve register numbers.
1270 * ax-gdb.c (gen_var_ref): Likewise.
1271 * findvar.c (read_var_value): Likewise.
1272 * printcmd.c (address_info): Likewise.
1274 * coffread.c (coff_reg_to_regnum): New function.
1275 (coff_register_funcs): New static variable.
1276 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
1277 Install SYMBOL_REGISTER_OPS callbacks.
1278 * mdebugread.c (mdebug_reg_to_regnum): New function.
1279 (mdebug_register_funcs): New static variable.
1280 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
1281 Install SYMBOL_REGISTER_OPS callbacks.
1282 * stabsread.c (stab_reg_to_regnum): New function.
1283 (stab_register_funcs): New static variable.
1284 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
1285 Install SYMBOL_REGISTER_OPS callbacks.
1287 2009-06-03 Doug Evans <dje@google.com>
1289 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
1290 after discarding its contents.
1292 2009-06-03 Pedro Alves <pedro@codesourcery.com>
1294 * target.c: Include "exec.h".
1295 (update_current_target): Don't inherit to_sections or
1297 (target_get_section_table): New.
1298 (target_section_by_addr): Fetch the section table from the passed
1300 (memory_xfer_partial): Handle unmapped overlay sections before
1301 anything else. Get the overlay mapped address here. Adjust to
1302 use section_table_xfer_memory_partial.
1303 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
1304 instead of TARGET_OBJECT_MEMORY.
1305 (target_resize_to_sections): Delete.
1306 (remove_target_sections): Adjust to remove target sections from
1307 `current_target_sections', and use resize_section_table.
1308 * target.h (struct target_ops) <to_sections, to_sections_end>:
1310 <to_get_section_table>: New method.
1311 (xfer_memory, print_section_info): Delete declarations.
1312 (struct target_section_table): New type.
1313 (target_get_section_table): Declare.
1314 (target_resize_to_sections): Delete declaration.
1315 (remove_target_sections): Delete declaration.
1316 * bfd-target.c (target_bfd_xfer_partial): Get the section table
1318 (target_bfd_get_section_table): New.
1319 (target_bfd_xclose): Adjust.
1320 (target_bfd_reopen): Store the section table in the to_data field.
1321 * corelow.c (core_data): New.
1322 (core_close): Adjust to release core_data and its sections.
1323 (core_open): Allocate core_data, and build its target sections
1325 (deprecated_core_resize_section_table): New.
1326 (core_files_info): Pass core_data to print_section_info.
1327 (core_xfer_partial): Adjust to use
1328 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
1329 (init_core_ops): Do not install a deprecated_xfer_memory callback
1331 * solib.c (update_solib_list): Add the shared library sections
1332 to the current target sections table.
1333 * exec.c (current_target_sections_1): New global.
1334 (current_target_sections): New global.
1335 (exec_close_1): New function, refactored from exec_close. Remove
1336 the exec_bfd's sections from the current target sections table.
1337 Adjust to not use to_sections.
1338 (exec_close): Remove all target sections. Call exec_close_1.
1339 (exec_file_clear): Use exec_close_1 instead of unpushing the
1341 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
1342 exec_bfd's sections to the current target sections table. Don't
1343 push the exec_ops target here.
1344 (resize_section_table): New.
1345 (add_target_sections): New.
1346 (remove_target_sections): Moved here.
1347 (section_table_xfer_memory): Adjust to implement the xfer_partial
1348 interface, and rename to...
1349 (section_table_xfer_memory_partial): ... this, replacing the
1350 current function of that same name.
1351 (exec_get_section_table): New.
1352 (exec_xfer_partial): New.
1353 (xfer_memory): Delete.
1354 (print_section_info): Replace the target_ops parameter by a
1355 target_section_table parameter.
1356 (exec_files_info, set_section_command, exec_set_section_address):
1357 Adjust to use the current sections table.
1358 (init_exec_ops): Do not register a deprecated_xfer_memory
1359 callback. Register to_xfer_partial and to_get_section_table
1361 * infrun.c (handle_inferior_event): Update comments around
1363 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
1364 deprecated_core_resize_section_table.
1365 * exec.h (resize_section_table): Declare.
1366 (section_table_xfer_memory_partial): Add const char * argument.
1367 (remove_target_sections): Declare here.
1368 (add_target_sections): Declare.
1369 (print_section_info): Declare here.
1370 * gdbcore.h (deprecated_core_resize_section_table): Declare.
1372 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
1374 * value.h (struct internalvar): Remove.
1375 (get_internalvar_integer): Add prototype.
1376 (set_internalvar_integer): Add prototype.
1377 (clear_internalvar): Add prototype.
1379 * value.c (struct internalvar): Move here. Add type member. Remove
1380 endian member. Add union_internalvar member instead of value member.
1381 (init_if_undefined_command): Use intvar->type.
1382 (create_internalvar): Do not initialize value/endian, but type.
1383 (create_internalvar_type_lazy): Call create_internalvar.
1384 (value_of_internalvar): Handle host-side internalvar contents.
1385 (set_internalvar_component): Likewise.
1386 (set_internalvar): Likewise.
1387 (get_internalvar_integer): New function.
1388 (clear_internalvar): Likewise.
1389 (set_internalvar_integer): Likewise.
1390 (preserve_values): Handle host-side internalvar contents.
1392 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
1393 set_internalvar_integer instead of set_internalvar.
1394 * findcmd.c (find_command): Likewise.
1395 * infrun.c (handle_inferior_event): Likewise.
1396 * source.c (forward_search_command, reverse_search_command): Likewise.
1397 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
1398 set_traceframe_context): Likewise.
1400 * printcmd.c (x_command): Call clear_internalvar instead of
1402 * tracepoint.c (set_traceframe_context): Likewise.
1404 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
1405 instead of value_of_internalvar.
1406 * linespec.c (decode_dollar): Likewise.
1408 * expprint.c (dump_subexp_body_standard): Use internalvar_name
1409 instead of accessing internalvar private elements.
1410 * valops.c (value_assign): Copy from original source instead of
1411 accessing internalvar private elements.
1413 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
1415 * scm-lang.c (builtin_type_scm): Remove.
1416 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
1417 objfile architecture. Use per-architecture builtin_scm_type instead
1418 of builtin_type_scm.
1419 (evaluate_exp): Pass expression architecture to scm_lookup_name.
1421 (scm_get_field): Add SIZE parameter. Use it instead of
1422 TYPE_LENGTH (builtin_type_scm).
1424 (build_scm_types): New function.
1425 (scm_type_data): New variable.
1426 (builtin_scm_type): New function.
1427 (_initialize_scheme_language): Do not initialize builtin_type_scm.
1428 Register build_scm_types as post-init function for scm_type_data.
1430 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
1431 instead of builtin_type_scm.
1433 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
1434 (scm_get_field): Add SIZE paramter.
1435 (scm_scmval_print): Remove prototype.
1436 (builtin_type_scm): Remove.
1437 (struct builtin_scm_type): Add structure definition.
1438 (builtin_scm_type): Add prototype.
1440 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
1441 instead of builtin_core_addr type; do not use objfile architecture.
1442 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
1443 Pass type to scm_scmval_print.
1444 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
1445 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
1446 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
1447 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
1449 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
1451 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
1452 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
1453 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
1454 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
1455 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
1456 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
1457 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
1458 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
1459 mdebug_type_complex, mdebug_type_double_complex,
1460 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
1463 (basic_type_data): New global variable.
1464 (basic_type): New function.
1465 (parse_type): Remove static basic type map map_bt. Call basic_type
1466 to get basic types instead of using mdebug_type_ variables.
1468 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
1469 (upgrade_type): Likewise.
1470 (parse_procedure): Likewise.
1471 (psymtab_to_symtab_1): Likewise.
1473 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
1474 Initialize basic_type_data.
1476 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
1478 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
1479 * dfp.c (promote_decimal): Remove.
1480 (decimal_binop): Convert LEN_RESULT to input parameter.
1481 Remove call to decimal_binop.
1482 (decimal_compare): Remove call to decimal_binop.
1484 * valarith.c (value_binop): Pass desired result type length
1487 2009-06-01 Tristan Gingold <gingold@adacore.com>
1489 * configure.tgt (avr): Set gdb_sim to use the simulator.
1491 2009-05-29 Doug Evans <dje@google.com>
1493 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
1494 If scheduler-locking is enabled, we're not going to be singlestepping
1495 any other previously stopped thread.
1497 2009-05-29 Pedro Alves <pedro@codesourcery.com>
1499 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
1501 2009-05-29 Eli Zaretskii <eliz@gnu.org>
1503 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
1504 for stabs and COFF debug info.
1506 2009-05-28 Pedro Alves <pedro@codesourcery.com>
1508 * infrun.c (handle_inferior_event): When thread hoping, switch
1509 inferior_ptid to the event thread before removing breakpoints from
1510 the target. If not stopping, also try to revert back to a thread
1511 that was doing a "next". Check if that thread still exists before
1513 (currently_stepping_thread): Delete and merge with ...
1514 (currently_stepping): ... this.
1515 (currently_stepping_callback): Rename to ...
1516 (currently_stepping_or_nexting_callback): ... this, and also
1517 return true if the thread was stepping over a call (has a
1518 step-resume breakpoint).
1520 2009-05-28 Tom Tromey <tromey@redhat.com>
1522 * python/python.c (gdbpy_parameter): Rename. Fix error message.
1523 (GdbMethods): Change "get_parameter" to "parameter".
1525 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
1526 Paul Pluzhnikov <ppluzhnikov@google.com>
1528 * configure.ac (!have_libpython): Add python-prettyprint source
1530 * configure: Regenerate.
1531 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
1534 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
1535 Tom Tromey <tromey@redhat.com>
1536 Thiago Jung Bauermann <bauerman@br.ibm.com>
1538 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
1539 * varobj.h (varobj_set_visualizer): Declare.
1540 (varobj_get_display_hint): Likewise.
1541 (varobj_update_result_t) <children_changed, value_installed>: New
1543 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
1544 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
1545 mi_cmd_var_set_child_range): Declare.
1546 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
1547 (mi_cmd_var_list_children): Emit display hint.
1548 (varobj_update_one): Emit display hint. Handle dynamic children.
1549 * python/python.c (GdbMethods): Add "default_visualizer".
1550 * python/python-internal.h (apply_varobj_pretty_printer,
1551 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
1553 (gdbpy_default_visualizer): Likewise.
1554 * varobj.c: Include python.h, python-internal.h.
1555 (PyObject): New typedef.
1556 (struct varobj) <children_requested, pretty_printer>: New fields.
1557 (varobj_create): Call install_default_visualizer.
1558 (instantiate_pretty_printer): New function.
1559 (varobj_set_display_format): Update.
1560 (varobj_get_display_hint): New function.
1561 (update_dynamic_varobj_children): New function.
1562 (varobj_get_num_children): Handle dynamic children.
1563 (varobj_list_children): Likewise.
1564 (install_new_value): Likewise.
1565 (varobj_add_child): New function.
1566 (install_visualizer): Likewise.
1567 (install_default_visualizer): Likewise.
1568 (varobj_set_visualizer): Likewise.
1569 (varobj_update): Handle dynamic children.
1570 (create_child): Use create_child_with_value.
1571 (create_child_with_value): New function.
1572 (value_get_print_value): Call pretty printer. Add value_formatter
1574 (c_value_of_variable): Update.
1575 (varobj_invalidate): Always free all_rootvarobj.
1576 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
1578 (gdbpy_get_varobj_pretty_printer): Likewise.
1579 (gdbpy_default_visualizer): Likewise.
1581 2009-05-27 Tom Tromey <tromey@redhat.com>
1582 Thiago Jung Bauermann <bauerman@br.ibm.com>
1583 Phil Muldoon <pmuldoon@redhat.com>
1584 Paul Pluzhnikov <ppluzhnikov@google.com>
1585 Vladimir Prus <vladimir@codesourcery.com>
1587 * python/python-value.c (value_object_to_value): New function.
1588 * python/python-internal.h: Include frameobject.h.
1589 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
1591 (value_object_to_value): Declare.
1592 * printcmd.c (struct format_data) <raw>: New field.
1593 (last_format): Default to 0.
1594 (decode_format): Initialize val.raw. Handle /r flag.
1595 (print_command_1): Initialize fmt.raw and opts.raw.
1596 (output_command): Likewise.
1597 (x_command): Fix initialization of fmt.format. Initialize
1599 (display_command): Initialize fmt.raw.
1600 (do_one_display): Set opts.raw.
1601 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
1602 gdbpy_display_hint_cst): New globals.
1603 (_initialize_python): Initialize them. Set gdb.pretty_printers.
1604 * cp-valprint.c: Include python.h.
1605 (cp_print_value): Call apply_val_pretty_printer.
1606 * python/python.h (apply_val_pretty_printer): Declare.
1607 * stack.c (print_this_frame_argument_p): Remove.
1608 (print_frame_args): Compute summary flag. Don't use
1609 print_this_frame_argument_p.
1610 * valprint.c: Include python.h.
1611 (user_print_options): Initialize new fields.
1612 (scalar_type_p): New function.
1613 (val_print): Handle 'raw' and 'summary' modes. Call
1614 apply_val_pretty_printer.
1615 (value_print): Handle 'raw' mode.
1616 * valprint.h (struct value_print_options) <raw, summary>: New
1618 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
1619 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
1620 (python-prettyprint.o): New target.
1621 * python/python-prettyprint.c: New file.
1623 2009-05-27 Tom Tromey <tromey@redhat.com>
1624 Paul Pluzhnikov <ppluzhnikov@google.com>
1626 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
1628 * cli/cli-dump.c (dump_value_to_file): Use value_address.
1629 * valprint.c (common_val_print): Likewise.
1630 * v850-tdep.c (v850_push_dummy_call): Use value_address.
1631 * tracepoint.c (encode_actions): Use value_address.
1632 * printcmd.c (print_formatted): Use value_address.
1633 (x_command): Likewise.
1634 * p-valprint.c (pascal_object_print_static_field): Use
1636 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
1637 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
1638 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
1639 * jv-valprint.c (java_value_print): Use value_address.
1640 * infcall.c (find_function_addr): Use value_address.
1641 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
1642 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
1643 * frv-tdep.c (frv_push_dummy_call): Use value_address.
1644 * frame.c (frame_register_unwind): Use value_address.
1645 (frame_unwind_register_value): Likewise.
1646 * darwin-nat-info.c (info_mach_region_command): Use
1648 * cp-valprint.c (cp_print_static_field): Use value_address.
1649 * c-valprint.c (c_value_print): Use value_address.
1650 * breakpoint.c (update_watchpoint): Use value_address.
1651 (can_use_hardware_watchpoint): Likewise.
1652 * ada-valprint.c (ada_val_print_1): Use value_address.
1653 (ada_value_print): Likewise.
1654 * ada-tasks.c (read_fat_string_value): Use value_address.
1655 * jv-lang.c (java_link_class_type): Use set_value_address.
1656 (java_link_class_type): Likewise.
1657 (get_java_utf8_name): Use value_address.
1658 (type_from_class): Likewise.
1659 (java_link_class_type): Likewise.
1660 * findvar.c (value_of_register): Use set_value_address.
1661 (read_var_value): Likewise.
1662 (read_var_value): Likewise.
1663 * eval.c (evaluate_subexp_standard): Use set_value_address.
1664 (evaluate_subexp_standard): Use value_address.
1665 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
1666 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
1667 (ada_value_primitive_packed_val): Likewise.
1668 (ensure_lval): Likewise.
1669 (thin_data_pntr): Use value_address.
1670 (desc_bounds): Likewise.
1671 (ada_value_primitive_packed_val): Likewise.
1672 (value_assign_to_component): Likewise.
1673 (ensure_lval): Likewise.
1674 (make_array_descriptor): Likewise.
1675 (ada_to_fixed_value): Likewise.
1676 (unwrap_value): Likewise.
1677 * value.c (deprecated_value_address_hack): Remove.
1678 (value_address): New function.
1679 (value_raw_address): Likewise.
1680 (set_value_address): Likewise.
1681 (value_fn_field): Use set_value_address.
1682 (value_from_contents_and_address): Likewise.
1683 (value_fn_field): Likewise.
1684 (allocate_value_lazy): Don't use VALUE_ADDRESS.
1685 (value_as_address): Use value_address.
1686 (value_static_field): Likewise.
1687 * valops.c (search_struct_field): Use set_value_address.
1688 (value_at): Likewise.
1689 (value_at_lazy): Likewise.
1690 (value_repeat): Likewise.
1691 (value_cast_structs): Use value_address.
1692 (value_cast): Likewise.
1693 (value_fetch_lazy): Likewise.
1694 (value_assign): Likewise.
1695 (value_repeat): Likewise.
1696 (address_of_variable): Likewise.
1697 (value_coerce_array): Likewise.
1698 (value_coerce_function): Likewise.
1699 (value_addr): Likewise.
1700 (search_struct_field): Likewise.
1701 (search_struct_method): Likewise.
1702 (find_method_list): Likewise.
1703 (value_struct_elt_for_reference): Likewise.
1704 (value_full_object): Likewise.
1705 * jv-valprint.c (java_value_print): Use set_value_address.
1706 * value.h (deprecated_value_address_hack): Remove.
1707 (VALUE_ADDRESS): Remove.
1708 (value_address): Declare.
1709 (value_raw_address): Declare.
1710 (set_value_address): Declare.
1712 2009-05-27 Tom Tromey <tromey@redhat.com>
1713 Thiago Jung Bauermann <bauerman@br.ibm.com>
1714 Phil Muldoon <pmuldoon@redhat.com>
1715 Paul Pluzhnikov <ppluzhnikov@google.com>
1717 * python/python.c (_initialize_python): Call
1718 gdbpy_initialize_types.
1719 (GdbMethods): Add "lookup_type".
1720 * python/python-value.c (value_object) <type>: New field.
1721 (valpy_dealloc): Decref type.
1722 (valpy_new): Initialize type.
1723 (valpy_get_type): New function.
1724 (value_to_value_object): Initialize type.
1725 (valpy_cast): New function.
1726 (value_object_getset): Add "type".
1727 (value_object_methods): Add "cast".
1728 * python/python-internal.h (type_to_type_object): Declare.
1729 (type_object_to_type): Likewise.
1730 (gdbpy_initialize_types): Likewise.
1731 (gdbpy_lookup_type): Declare.
1732 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
1733 (SUBDIR_PYTHON_SRCS): Add python-type.c.
1734 (python-type.o): New target.
1735 * python/python-type.c: New file.
1737 2009-05-27 Tom Tromey <tromey@redhat.com>
1738 Thiago Jung Bauermann <bauerman@br.ibm.com>
1739 Phil Muldoon <pmuldoon@redhat.com>
1741 * python/python.c: Include objfiles.h, observer.h.
1742 (gdbpy_auto_load): New global.
1743 (gdbpy_current_objfile): Likewise.
1744 (GDBPY_AUTO_FILENAME): New define.
1745 (gdbpy_new_objfile): New function.
1746 (gdbpy_get_current_objfile): Likewise.
1747 (gdbpy_objfiles): Likewise.
1748 (_initialize_python): Add "maint set auto-load". Call
1749 gdbpy_initialize_objfile. Attach objfile observer.
1750 (GdbMethods): New methods current_objfile, objfiles.
1751 * python/python-objfile.c: New file.
1752 * python/python-internal.h (objfile_to_objfile_object): Declare.
1753 (objfpy_get_printers): Likewise.
1754 (gdbpy_initialize_objfile): Likewise.
1755 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
1756 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
1757 (python-objfile.o): New target.
1759 2009-05-27 Pedro Alves <pedro@codesourcery.com>
1761 * infrun.c (follow_exec): Clear the stop_requested flag.
1762 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
1765 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
1767 * nto-procfs.c (get_regset): Pass correct pointer.
1769 2009-05-26 Doug Evans <dje@google.com>
1771 * dwarf2read.c (follow_die_ref): Add comment.
1772 (dwarf2_mark_helper): Tweak comment.
1773 (dwarf2_mark): Move description to its proper place.
1775 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
1777 * procfs.c (procfs_wait): Add options parameter.
1779 2009-05-24 Doug Evans <dje@google.com>
1781 Global renaming of find_thread_pid to find_thread_ptid.
1782 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
1783 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
1784 All callers updated.
1786 * infrun.c (follow_fork): Initialize new step_* locals
1787 to avoid "may be used uninitialized" warnings.
1789 2009-05-24 Pedro Alves <pedro@codesourcery.com>
1791 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
1793 2009-05-24 Pedro Alves <pedro@codesourcery.com>
1795 * gdbthread.h (struct thread_info): New `pending_follow' field.
1796 * thread.c (new_thread): New function.
1797 (add_thread_silent): Use it.
1798 * breakpoint.c (internal_breakpoint_number): New global, moved
1800 (create_internal_breakpoint): ... this.
1801 (clone_momentary_breakpoint): New.
1802 * breakpoint.h (clone_momentary_breakpoint): Declare.
1803 * infrun.c (nullify_last_target_wait_ptid): Move declaration
1805 (pending_follow): Delete.
1806 (follow_fork): Handle pending follow fork event here. Moved the
1807 preserving of thread stepping state here.
1808 (resume): Don't handle pending follow fork events here. Only
1809 install the inferior's terminal modes if we're about to resume it.
1810 (proceed): Handle possible pending follow fork events here.
1811 (init_wait_for_inferior): No need to clear pending_follow anymore,
1813 (handle_inferior_event): Adjust to per-thread `pending_follow'.
1814 Call `follow_fork' to handle following the fork. If the
1815 follow-fork is cancelled, stop stepping.
1816 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
1817 `pending_follow' events. Remove code that handled preserving the
1818 thread stepping state.
1819 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
1820 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
1822 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
1824 * symfile.c (add_shared_symbol_files_command): Remove
1825 prototype and function.
1826 (_initialize _symfile): Move "add-shared-symbol-files"
1827 command and "assf" alias.
1828 * windows-nat.c (_initialize_windows_nat): to here.
1829 Change "add-shared-symbol-files" to alias.
1831 * config/i386/cygwin.mh: Remove NAT_FILE.
1832 * config/i386/mingw.mh: Remove NAT_FILE.
1833 * config/i386/mingw64.mh: Remove NAT_FILE.
1834 * config/i386/nm-cygwin.h: Remove file.
1835 * config/i386/nm-cygwin64.h: Remove file.
1837 2009-05-24 Hui Zhu <teawater@gmail.com>
1839 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
1840 I386_LINUX_RECORD_IOCTL_*,
1841 I386_LINUX_RECORD_FCNTL_*) Removed.
1842 (i386_linux_init_abi): Change size of record from macros to
1845 2009-05-24 Hui Zhu <teawater@gmail.com>
1847 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
1848 * linux-record.c (record_linux_system_call): Ditto.
1849 * linux-record.h (linux_record_tdep): Ditto.
1851 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
1853 Replace the savestring calls by xstrdup calls where possible.
1854 * breakpoint.c (condition_command, set_raw_breakpoint)
1855 (create_catchpoint, update_breakpoint_locations): Replace the
1856 savestring calls by xstrdup calls where possible.
1857 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
1858 (record_producer): Likewise.
1859 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
1860 * corefile.c (set_gnutarget): Likewise.
1861 * dbxread.c (add_new_header_file): Likewise.
1862 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
1863 * event-top.c (push_prompt, pop_prompt, command_line_handler)
1864 (set_async_prompt): Likewise.
1865 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
1867 * language.c (set_language_command, _initialize_language): Likewise.
1868 * linespec.c (decode_line_2): Likewise.
1869 * rs6000-nat.c (add_vmap): Likewise.
1870 * top.c (set_prompt, init_history, init_main): Likewise.
1871 * tracepoint.c (stringify_collection_list): Likewise.
1872 * varobj.c (varobj_create): Remove variable expr_len. Replace the
1873 savestring calls by xstrdup calls where possible.
1874 (value_of_root, c_name_of_variable, c_describe_child): Replace the
1875 savestring calls by xstrdup calls where possible.
1876 * xcoffread.c (complete_symtab): Likewise.
1877 * cli/cli-script.c (build_command_line, define_command): Likewise.
1878 * cli/cli-setshow.c (do_setshow_command): Likewise.
1880 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
1882 Remove already unreachable code.
1883 * varobj.c (varobj_get_handle): Fix comment when error is called.
1884 All callers updated.
1886 2009-05-23 Eli Zaretskii <eliz@gnu.org>
1888 * README (`configure' options): Document GDB-specific options to
1891 * symtab.c (skip_prologue_using_lineinfo): New function.
1892 (find_function_start_sal): Use it to get to the first line of
1893 function's body that has an entry in the lineinfo table.
1895 * symmisc.c (dump_symtab): Switch the current language to
1896 the language of the symtab we are dumping only if the symtab's
1897 language is neither language_auto nor language_unknown.
1899 * coffread.c (coff_symtab_read): Set language_minimal as the
1900 language for the "_globals_" pseudo-file.
1901 (process_coff_symbol): Set the symbol's language to the language
1904 2009-05-22 Pedro Alves <pedro@codesourcery.com>
1906 * target.h (struct section_table): Rename to ...
1907 (struct target_section): ... this.
1908 * exec.c: Adjust all references.
1909 * exec.h: Adjust all references.
1910 * nto-tdep.c: Adjust all references.
1911 * nto-tdep.h: Adjust all references.
1912 * ppc-linux-tdep.c: Adjust all references.
1913 * rs6000-nat.c: Adjust all references.
1914 * s390-tdep.c: Adjust all references.
1915 * solib-darwin.c: Adjust all references.
1916 * solib-frv.c: Adjust all references.
1917 * solib-irix.c: Adjust all references.
1918 * solib-null.c: Adjust all references.
1919 * solib-osf.c: Adjust all references.
1920 * solib-pa64.c: Adjust all references.
1921 * solib-som.c: Adjust all references.
1922 * solib-sunos.c: Adjust all references.
1923 * solib-svr4.c: Adjust all references.
1924 * solib-target.c: Adjust all references.
1925 * solib.c: Adjust all references.
1926 * solist.h: Adjust all references.
1927 * symfile.c: Adjust all references.
1928 * symfile.h: Adjust all references.
1929 * target.c: Adjust all references.
1931 2009-05-22 Hui Zhu <teawater@gmail.com>
1933 Add sys_fcntl argument interfaces to linux_record_tdep.
1935 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
1936 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
1938 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
1939 I386_LINUX_RECORD_FCNTL_F_GETLK64,
1940 I386_LINUX_RECORD_FCNTL_F_SETLK64,
1941 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
1942 of I386 Linux sys_fcntl arguments.
1943 (i386_linux_init_abi): Set macros values to linux_record_tdep.
1944 * linux-record.c (record_linux_system_call): Change to use
1945 the interface in linux_record_tdep in sys_fcntl and
1948 * linux-record.c (record_linux_system_call): Fix the process
1949 record build error about type in CYGWIN.
1951 2009-05-22 Pedro Alves <pedro@codesourcery.com>
1953 * inflow.c (kill_command): Delete left over static declaration.
1955 2009-05-22 Pedro Alves <pedro@codesourcery.com>
1957 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
1959 (struct section_closure): Delete.
1960 (add_to_section_table): Delete.
1961 (build_target_sections_from_bfd): Delete.
1962 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
1963 (target_bfd_reopen): Use build_section_table.
1964 * exec.c (xfer_memory): Move most code except for overlay
1965 debugging support from here...
1966 (section_table_xfer_memory): ... to this new function.
1967 (section_table_xfer_memory_partial): New.
1968 * exec.h (section_table_xfer_memory_partial): Declare.
1969 * bfd-target.h (build_target_sections_from_bfd): Delete
1972 2009-05-22 Pedro Alves <pedro@codesourcery.com>
1974 * remote.c (compare_sections_command): Don't declare exec_bfd.
1975 * tracepoint.c: Include "gdbcore.h".
1976 (remote_set_transparent_ranges): Don't declare exec_bfd.
1978 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1980 * aix-thread.c (init_aix_thread_ops): Whitespace.
1982 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1984 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
1985 to call the to_wait method in the target beneath.
1986 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
1988 2009-05-21 Joel Brobecker <brobecker@adacore.com>
1990 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
1991 to call the to_wait method in the target_beneath.
1993 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1995 * linux-nat.c (linux_nat_terminal_inferior)
1996 (linux_nat_terminal_ours): Don't check sync_execution.
1997 * remote.c (remote_terminal_inferior, remote_terminal_ours):
1998 Don't check sync_execution. Update comments.
1999 * target.c (target_terminal_inferior): New.
2000 * target.h (target_terminal_inferior): Delete macro, and declare
2002 * event-top.c (async_disable_stdin): Make idempotent. Don't give
2003 the target the terminal here.
2004 * inflow.c (terminal_ours_1): Don't return early without setting
2007 2009-05-21 Pedro Alves <pedro@codesourcery.com>
2009 * target.h (TARGET_WNOHANG): New.
2010 * target.c (target_wait): Add `options' argument. Adjust.
2011 (struct target_ops) <to_wait>: Add `options' argument.
2012 (target_wait): Add `options' argument.
2013 * infrun.c (wait_for_inferior): Pass 0 as options to
2014 target_wait (blocking wait).
2015 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
2017 * fork-child.c (startup_inferior): Pass 0 as options to
2018 target_wait (blocking wait).
2019 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
2020 (linux_nat_wait_1): Add `target_options' argument. Use it instead
2021 of checking on target_can_async_p.
2022 (linux_nat_wait): Add `target_options' argument. Adjust.
2023 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
2024 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
2025 (remote_wait_as): Add `options' argument. Adjust to check on
2026 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
2027 a blocking wait, keep waiting until an interesting event comes
2029 (remote_wait): Add `options' argument. Don't loop here if the
2030 target is in async mode, and a blocking wait has been requested.
2032 * top.c (deprecated_target_wait_hook): Add `options' argument.
2033 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
2034 pass it down to the layer beneath.
2035 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
2036 * record.c (record_beneath_to_wait): Add `options' argument.
2037 (record_wait): Add `options' argument, and pass it down to the
2039 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
2040 * darwin-nat.c (darwin_wait): Likewise.
2041 * defs.h (deprecated_target_wait_hook): Likewise.
2042 * gnu-nat.c (gnu_wait): Add `options' argument.
2043 * go32-nat.c (go32_wait): Likewise.
2044 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
2045 pass it down to the layer beneath.
2046 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
2047 * monitor.c (monitor_wait): Likewise.
2048 * nto-procfs.c (procfs_wait): Likewise.
2049 * remote-mips.c (mips_wait): Add `options' argument.
2050 * remote-sim.c (gdbsim_wait): Likewise.
2051 * rs6000-nat.c (rs6000_wait): Add `options' argument.
2052 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
2053 it down to the layer beneath.
2054 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
2055 * windows-nat.c (windows_wait): Likewise.
2056 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
2058 2009-05-21 Pedro Alves <pedro@codesourcery.com>
2060 * mi/mi-interp.c (mi_on_resume): Account for whole process
2063 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2065 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
2067 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2069 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
2071 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2073 Fix parsing DW_AT_const_value using DW_FORM_string.
2074 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
2076 2009-05-20 Joel Brobecker <brobecker@adacore.com>
2078 * aix-thread.c (giter_count): Do not count the main thread.
2079 (giter_accum): Do not include the main thread.
2081 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
2083 Remove the PROT parameter from openp.
2084 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
2085 defs.h (openp): Update the prototype.
2086 Update all the openp callers.
2088 2009-05-19 Pedro Alves <pedro@codesourcery.com>
2090 * inflow.c (kill_command): Moved to infcmd.c.
2091 (_initialize_inflow): Don't add the "kill" command or clear
2093 * infcmd.c (kill_command): Moved here from inflow.c.
2094 (_initialize_infcmd): Add the "kill" command here.
2096 2009-05-19 Pedro Alves <pedro@codesourcery.com>
2098 * fork-child.c: Don't include frame.h. Include terminal.h.
2099 (fork_inferior): Call new_tty_postfork after forking adn adding
2100 the child to the inferior list.
2101 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
2103 * inflow.c (struct terminal_info): Remove const qualifier from
2104 `run_terminal' field.
2105 (inferior_thisrun_terminal): Tweak comment.
2106 (inflow_inferior_exit): Release the `run_terminal' field.
2107 (copy_terminal_info): New function.
2108 (new_tty_postfork): New function.
2109 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
2110 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
2111 * inf-ptrace.c: Include terminal.h.
2112 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
2114 * linux-nat.c: Include terminal.h.
2115 (linux_child_follow_fork): Copy the parent's terminal info to the
2117 * inf-ttrace.c: Include terminal.h.
2118 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
2121 2009-05-19 Pedro Alves <pedro@codesourcery.com>
2123 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
2124 (update_global_location_list): Use gdbarch_has_global_breakpoints
2125 instead of gdbarch_has_global_solist and
2126 target_supports_multi_process.
2127 * dicos-tdep.c (dicos_init_abi): Set
2128 gdbarch_has_global_breakpoints.
2129 * gdbarch.sh (has_global_solist): Update comment.
2130 (has_global_breakpoints): New.
2131 * remote.c (remote_start_remote): Use
2132 gdbarch_has_global_breakpoints instead of
2133 gdbarch_has_global_solist.
2134 * target.c (target_detach): Use gdbarch_has_global_breakpoints
2135 instead of gdbarch_has_global_solist.
2136 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
2137 of target_supports_multi_process.
2139 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
2141 * objc-lang.c (find_methods): Plug a small memory leak.
2143 2009-05-18 Pedro Alves <pedro@codesourcery.com>
2145 * solib-svr4.c: Include observer.h.
2146 (debug_base, debug_loader_offset_p, debug_loader_offset)
2147 (debug_loader_name, main_lm_addr): Move these globals...
2148 (struct svr4_info): ... into this new structure.
2149 (svr4_info_p): New typedef.
2150 (svr4_info): New global.
2151 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
2153 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
2154 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
2156 (open_symbol_file_object): Adjust to per-inferior svr4.
2157 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
2159 (enable_break): Add svr4_info argument. Adjust to per-inferior
2161 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
2162 Adjust to per-inferior svr4.
2163 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
2166 2009-05-18 Pedro Alves <pedro@codesourcery.com>
2168 * linux-nat.h (linux_proc_get_tgid): Declare.
2169 * linux-nat.c (linux_proc_get_tgid): New.
2170 * linux-thread-db.c (struct thread_db_info): New field
2171 `need_stale_parent_threads_check'.
2172 (add_thread_db_info): Set it.
2173 (find_new_threads_callback): Ignore stale fork parent threads.
2174 (thread_db_resume): New.
2175 (init_thread_db_ops): Install thread_db_resume.
2177 2009-05-18 Pedro Alves <pedro@codesourcery.com>
2179 * fork-child.c (fork_inferior): Only reset the thread list if this
2180 is the first inferior.
2181 (startup_inferior): If the target support multi-process, tell it
2182 to resume only the new process.
2183 * linux-nat.c (num_lwps): Delete global.
2184 (purge_lwp_list): New function.
2185 (num_lwps): New function.
2186 (add_lwp, delete_lwp): Adjust.
2188 (iterate_over_lwps): Add filter argument. Handle it.
2189 (linux_nat_attach): Remove FIXME note.
2190 (linux_nat_detach): Adjust to iterate over threads of the inferior
2191 we're detaching from. Adjust to num_lwps being a function. Don't
2192 assume the head of the lwp list is the main thread of the process
2193 we're detaching from. Don't destroy the LWP list.
2194 (resume_callback): Add debug output.
2195 (linux_nat_resume): Handle resuming a single inferior. Allow a
2196 wildcard resume in non-stop mode.
2197 (linux_handle_extended_wait): Don't assume inferior_ptid is the
2198 correct inferior of the parent LWP.
2199 (status_callback): Also check lp->waitstatus.
2200 (select_event_lwp): Add new filter parameter. Handle it.
2201 (linux_nat_filter_event): Adjust to num_lwps being a function.
2202 (linux_nat_wait_1): When adding the first lwp of the inferior, use
2203 an is_lwp check instead of checking for the number of lwps.
2204 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
2205 pending process exit statuses.
2206 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
2207 Instead delete LWPs of the inferior that we're mourning. Don't
2208 unregister from the event loop here.
2209 (linux_nat_pid_to_str): Use `num_lwps'.
2210 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
2212 (linux_nat_is_async_p): Check if async was masked out.
2213 (linux_multi_process): New global.
2214 (linux_nat_supports_multi_process): New.
2215 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
2217 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
2219 (linux_nat_close): New.
2220 (linux_nat_add_target): Register linux_nat_close and
2221 linux_nat_supports_multi_process.
2222 * linux-nat.h (iterate_over_lwps): Add filter argument.
2223 * linux-thread-db.c (thread_db_handle): Delete.
2224 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
2225 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
2226 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
2227 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
2228 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
2229 longer globals, moved to...
2230 (struct thread_db_info): ... this new structure.
2231 (thread_db_list): New.
2232 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
2234 (have_threads_callback): Filter out threads of all inferiors but
2235 the one specified by the ARGS argument.
2236 (have_threads): Add ptid argument specifying the inferior we're
2237 interested in. Handle it.
2238 (struct thread_get_info_inout): New.
2239 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
2240 (thread_db_attach_lwp): Check that inferior of the passed in
2241 thread is using thread-db. Adjust.
2242 (enable_thread_event): Remove thread_agent parameter. Instead,
2243 get it from the per-inferior thread-db info.
2244 (dladdr_to_soname): Move higher up.
2245 (enable_thread_event_reporting): Adjust to use per-inferior
2247 (try_thread_db_load_1): Replace `handle' parameter by a
2248 thread_db_info parameter. Adjust to use per-inferior thread-db
2250 (try_thread_db_load): Adjust to use per-inferior thread-db info.
2251 (thread_db_load, disable_thread_event_reporting): Ditto.
2252 (check_for_thread_db): Remove conditional reporting of which
2253 libthread_db is in use.
2254 (thread_db_new_objfile): Add comment about inferior_ptid.
2255 (attach_thread): Adjust to use per-inferior thread-db info.
2256 (thread_db_detach): Adjust to use per-inferior thread-db info.
2257 Remove thread event breakpoints of the current inferior. Only
2258 unpush the thread-db target if there are no more processes using
2260 (check_event): Adjust to use per-inferior thread-db info.
2261 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
2262 unpush the thread-db target if there are no more processes using
2264 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
2265 info. Mark breakpoints of the current inferior out before
2266 deleting them. Only unpush the thread-db target if there are no
2267 more processes using it.
2268 (find_new_threads_callback): Adjust to use per-inferior thread_db
2270 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
2271 use per-inferior thread-db info.
2272 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
2274 (thread_db_get_thread_local_address): Adjust.
2275 (thread_db_get_ada_task_ptid): Adjust.
2276 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
2277 if there no more processes left to debug.
2278 * thread.c (set_running, set_executing): Handle resuming all
2279 threads of a single inferior.
2280 * mi/mi-interp.c (mi_output_running_pid): New.
2281 (mi_inferior_count): New.
2282 (mi_on_resume): For backwards compatibility, if resuming all
2283 threads of an inferior, and there is only one inferior, output
2286 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2288 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
2289 (to_fixed_range_type): ... to here.
2291 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2293 * ada-lang.c (desc_data_type): Remove, replace by ...
2294 (desc_data_target_type): ... this.
2295 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
2296 (ada_is_array_descriptor_type): Likewise.
2297 (ada_type_of_array): Likewise.
2298 (ada_coerce_to_simple_array_type): Likewise.
2299 (ada_array_element_type): Likewise.
2301 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2303 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
2304 result of ada_vax_float_print_function inferior call.
2306 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2308 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
2309 avoid creating a dummy value.
2311 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2313 * p-valprint.c (pascal_val_print): Use extract_typed_address
2314 to extract reference value.
2316 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2318 * doublest.c (NAN): Remove unused define.
2319 (extract_floating_by_length, deprecated_extract_floating): Remove.
2320 (store_floating_by_length, deprecated_store_floating): Remove.
2321 (extract_typed_floating): Do not call extract_floating_by_length.
2322 (store_typed_floating): Do not call store_floating_by_length.
2323 (convert_typed_floating): Remove redundant assertions.
2324 * doublest.h (deprecated_extract_floating): Remove.
2325 (deprecated_store_floating): Remove.
2326 * sh64-tdep.c (sh64_register_convert_to_raw): Call
2327 extract_typed_floating instead of deprecated_extract_floating.
2329 2009-05-18 Jon Beniston <jon@beniston.com>
2331 * MAINTAINERS: Add lm32 target.
2332 * Makefile.in: Add lm32 dependencies.
2333 * NEWS: Indicate lm32 is a new target.
2334 * configure.tgt: Add lm32 targets.
2335 * lm32-tdep.c: New file.
2337 2009-05-18 Pedro Alves <pedro@codesourcery.com>
2339 * corelow.c (core_open): Flush the register cache before doing
2340 anything with registers.
2342 2009-05-18 Pedro Alves <pedro@codesourcery.com>
2344 * inflow.h (our_process_group): Remove declaration.
2345 (inferior_process_group): Delete global variable declaration.
2346 (inferior_process_group): New function declaration.
2347 * inflow.c: Include observer.h.
2348 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
2350 (struct terminal_info): New struct.
2351 (our_terminal_info): New global.
2352 (inferior_process_group): New function.
2353 (inferior_thisrun_terminal): Extend description comment.
2354 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
2356 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
2358 (terminal_inferior): Ditto.
2359 (terminal_ours_1): Ditto.
2360 (inflow_new_inferior, inflow_inferior_exit): New functions.
2361 (child_terminal_info): Adjust to per-inferior terminal settings.
2362 (osig_set): New global.
2363 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
2364 or clear `osig_set' accordingly.
2365 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
2366 SIGINT handler, instead of checking the current inferior (which
2368 (_initialize_inflow): Attach inflow_new_inferior and
2369 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
2370 notifications, respectively.
2371 * inferior.h (struct terminal_info): Forward declare.
2372 (struct inferior): Add `terminal_info' field.
2373 * inferior.c (delete_inferior_1): Notify the inferior_exit
2374 observers before removing the inferior from the lists and deleting
2376 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
2377 a function instead of a variable. Adjust.
2378 * procfs.c (procfs_stop): Ditto.
2380 2009-05-17 Pedro Alves <pedro@codesourcery.com>
2382 * infrun.c (handle_inferior_event): When handling a
2383 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
2385 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
2386 from the child if vforking.
2387 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
2388 breakpoints from the child here.
2390 2009-05-17 Pedro Alves <pedro@codesourcery.com>
2392 * infrun.c (pending_follow): Remove execd_pathname member.
2393 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
2394 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
2395 event, don't copy `execd_pathname' to pending_follow, use the
2396 event copy instead. Release `execd_pathname' once done with
2399 * infrun.c (pending_follow): Remove mention of exec events.
2401 2009-05-17 Hui Zhu <teawater@gmail.com>
2403 * i386-tdep.c (i386_process_record): Make it extern.
2404 (i386_gdbarch_init): Don't call set_gdbarch_process_record
2406 * i386-tdep.h (i386_process_record): Declare.
2407 * i386-linux-tdep.c (i386_linux_init_abi): Call
2408 set_gdbarch_process_record.
2410 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
2412 Always report varobj as changed when in_scope attribute changes.
2414 * varobj.c (install_new_value): If non-NULL-ness of value
2417 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
2419 * NEWS: Mention set/show libthread-db-search-path.
2420 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
2421 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
2422 * linux-thread-db.c (libthread_db_search_path): New setting.
2423 (thread_db_handle): New variable (replaces using_thread_db).
2424 (try_thread_db_load_1): New function.
2425 (try_thread_db_load, thread_db_load_search): Likewise.
2426 (dladdr_to_soname): Likewise.
2427 (thread_db_load): Iterate over possibly multiple libthread_db's.
2428 (check_for_thread_db): Attempt to load new libthread_db.
2429 (thread_db_detach, thread_db_wait): Unload libthread_db.
2430 (thread_db_mourn_inferior): Likewise.
2431 (_initialize_thread_db): Add new libthread-db-search-path option.
2432 Defer loading of libthread_db to check_for_thread_db.
2433 * solib.c (libpthread_name_p): New function.
2434 (libpthread_solib_p): Call it.
2435 * solib.h (libpthread_name_p): New prototype.
2437 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
2439 * MAINTAINERS: Update my email address.
2441 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
2443 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
2444 * breakpoint.c (create_overlay_event_breakpoint): Renamed
2445 from create_overlay_event_breakpoint_1, old
2446 create_overlay_event_breakpoint deleted.
2447 (breakpoint_re_set_objfile): Don't rescan all objfiles
2449 (breakpoint_re_set): New function.
2450 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
2451 instead of breakpoint_re_set.
2452 * objfiles.c (objfile_relocate): Likewise.
2454 2009-05-14 Joel Brobecker <brobecker@adacore.com>
2456 * gdbarch.sh: Add comment documenting the target_gdbarch global.
2457 gdbarch.h does NOT need to be regenerated as the corresponding
2458 change has already been made in a previous commit.
2460 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
2462 Remove all i386 debug register low level macros in config nm files.
2463 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
2464 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
2465 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
2467 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
2468 (struct i386_dr_low_type): New type.
2469 (i386_dr_low): New global variable.
2470 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
2471 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
2472 i386_dr_low struct variable fields.
2473 (i386_remove_aligned_watchpoint): Likewise.
2474 (i386_stopped_data_address): Likewise.
2475 (i386_stopped_by_hwbp): Likewise.
2476 (show_debug_regs_command_added): New static variable.
2477 (add_show_debug_regs_command): New static function.
2478 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
2479 (i386_set_debug_register_length): New function.
2480 (_initialize_i386_nat): Delete.
2482 * amd64-linux-nat.c: Include "i386-nat.h".
2483 (amd64_linux_dr_set_control): Change to static.
2484 (amd64_linux_dr_get_status): Change to static.
2485 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
2486 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
2488 * go32-nat.c: Include "i386-nat.h".
2489 (go32_set_addr): Change to static.
2490 (go32_set_dr7): Change to static. Change arg type to unisgned long.
2491 (go32_get_dr6): Change to static. Change return type to unisnged long.
2492 (init_go32_ops): Set i386_dr_low variable fields.
2493 * i386-linux-nat.c: Include "i386-nat.h".
2494 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
2495 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
2496 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
2497 * i386bsd-nat.h: Declare functions used for
2498 i386_dr_low fields in i386fbsd-nat.c.
2499 * i386fbsd-nat.c: Include "i386-nat.h".
2500 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
2501 * windows-nat.c: Include "i386-nat.h".
2502 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
2504 (cygwin_get_dr6): Change return type to unisnged long.
2505 (cygwin_set_dr7): Change arg type to unisgned long.
2506 (init_windows_ops): Set i386_dr_low function fields.
2508 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
2509 i386_set_debug_register_length.
2510 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
2512 * config/i386/nm-cygwin.h: Remove all I386_* macros.
2513 * config/i386/nm-cygwin64.h: Likewise.
2514 * config/i386/nm-fbsd.h: Likewise.
2515 * config/i386/nm-linux.h: Likewise.
2516 * config/i386/nm-i386.h: Remove completely.
2517 * config/i386/nm-go32.h: Remove completely.
2518 * config/i386/nm-linux64.h: Remove completely.
2519 * config/i386/go32.mh (NAT_FILE): Remove entry.
2520 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
2522 2009-05-14 Jon Beniston <jon@beniston.com>
2524 * MAINTAINERS: Add Jon Beniston to write after approval list.
2526 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
2528 * objc-lang.c (objc_objfile_data): New variable.
2529 (find_methods): Skip objfiles without Obj-C methods.
2530 (_initialize_objc_lang): New function.
2532 2009-05-13 Joel Brobecker <brobecker@adacore.com>
2534 * c-lang.c (print_wchar): Remove unnecessary cast.
2536 2009-05-12 Jim Blandy <jimb@red-bean.com>
2538 * MAINTAINERS: Remove self as m32c target maintainer.
2540 2009-05-12 Pedro Alves <pedro@codesourcery.com>
2542 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
2543 * command.h (deprecated_add_set_cmd): Delete declaration.
2544 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
2545 'set debug gnu-nat' and 'show debug gnu-nat'.
2546 * i386-nat.c (_initialize_i386_nat): Replace 'maint
2547 show-debug-registers' with 'maint set show-debug-registers' and
2548 'maint show show-debug-registers'.
2549 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
2550 show-debug-registers' with 'maint set show-debug-registers' and
2551 'maint show show-debug-registers'.
2553 2009-05-12 Joel Brobecker <brobecker@adacore.com>
2555 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
2556 pushing it on the output obstack.
2558 2009-05-11 Joel Brobecker <brobecker@adacore.com>
2560 Fix internal error on breaking at a multi-locations caller source line.
2561 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
2562 command with no parameters.
2564 2009-05-11 Pedro Alves <pedro@codesourcery.com>
2566 * linux-nat.c (enum sigchld_state): Delete.
2567 (linux_nat_async_events_state): Delete.
2568 (struct waitpid_result): Delete.
2569 (waitpid_queue): Delete.
2570 (queued_waitpid_1): Delete.
2571 (async_file_flush): New.
2572 (queued_waitpid, push_waitpid): Delete.
2573 (async_file_mark): New.
2574 (drain_queued_events): Delete.
2575 (my_waitpid): Remove locally queued events handling.
2576 (linux_test_for_tracefork): Upjust.
2577 (linux_child_follow_fork): Ditto.
2578 (sync_sigchld_action): Delete.
2579 (blocked_mask): Reinstate.
2580 (async_sigchld_action): Rename to...
2581 (sigchld_action): ... this.
2582 (block_child_signals): New.
2583 (restore_child_signals_mask): New.
2584 (lin_lwp_attach_lwp): Adjust.
2585 (linux_nat_create_inferior): Ditto.
2586 (linux_nat_attach): Also use lp->status in async mode.
2587 (get_pending_status): Don't use queued_waitpid.
2588 (linux_nat_detach): Don't drain locally queued events.
2589 (linux_nat_resume): Allow pending wait statuses stored lp->status
2590 in async mode. If returning early due to a pending event,
2591 re-register the event source.
2592 (stop_wait_callback): Allow pending wait statuses stored
2593 lp->status in async mode.
2594 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
2595 (linux_nat_wait): Rename to ...
2596 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
2597 lp->status in async mode. Always add WNOHANG to the waitpid
2598 options in async mode.
2599 (linux_nat_wait): New.
2600 (kill_callback): Don't drain locally queued events.
2601 (sigchld_handler): Rewrite.
2602 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
2603 refer to "set target-async".
2604 (linux_nat_async_mask): If in non-stop, and re-enabling async
2605 mode, re-register the target event source in the event loop.
2606 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
2607 (get_pending_events, async_sigchld_handler)
2608 (linux_nat_async_events): Delete.
2609 (handle_target_event): New.
2610 (linux_nat_async_file_handler): Delete.
2611 (linux_async_pipe): New.
2612 (linux_nat_async): Only re-register in the event loop if not
2613 registered yet. Always notify the event-loop once if enabling the
2615 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
2616 lp->status, not in the locally queued event list.
2617 (linux_nat_stop): Don't mask out async event handling.
2618 (linux_nat_setup_async): Delete.
2619 (_initialize_linux_nat): Adjust.
2620 (lin_thread_get_thread_signals): blocked_mask is global again.
2623 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
2625 Unify target macros.
2627 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
2628 (target_stoppped_by_watchpoint): New macro.
2629 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
2630 (target_have_steppable_watchpoint): New macro.
2631 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
2632 (target_have_continuable_watchpoint): New macro.
2633 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
2634 (target_can_use_hardware_watchpoint): New macro.
2635 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
2636 (target_region_ok_for_hw_watchpoint): New macro.
2638 * breakpoint.c (update_watchpoint): Use new macros.
2639 (bpstat_alloc): Likewise.
2640 (create_breakpoint): Likewise.
2641 (watch_command_1): Likewise.
2642 (can_use_hardware_watchpoint): Likewise.
2643 (do_enable_breakpoint): Likewise.
2644 * infrun.c (handle_inferior_event): Adapt to new macros.
2645 * mips-tdep.c (mips_gdbarch_init): Update comments.
2646 * procfs.c (procfs_set_watchpoint): Update comment.
2647 (procfs_insert_watchpoint): Adapt to new macros.
2648 * remote-m32r-sdi.c (m32r_stop):
2649 * remote-mips.c (mips_remove_breakpoint):
2650 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
2651 (debug_to_stopped_by_watchpoint): Likewise.
2654 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
2656 * src/gdb/target.h: Remove all tests for already defined
2657 macros. All macros defined here should not be set in config
2660 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2662 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
2663 (have_ptrace_getsetfpregs): Likewise.
2664 fetch_all_gp_regs): New function.
2665 (fetch_gp_regs): New function.
2666 (fetch_all_fp_regs): Likewise.
2667 (fetch_fp_regs): New function.
2668 (fetch_ppc_registers): Using the new methods to fetch general-
2669 purpose and floating-pointer registers.
2670 (store_all_gp_regs): New function.
2671 (store_gp_regs): Likewise.
2672 (store_all_fp_regs): New function.
2673 (store_fp_regs): Likewise.
2674 (store_ppc_registers): Using the new methods to store general-
2675 purpose and floating-pointer registers.
2677 2009-05-08 Doug Evans <dje@google.com>
2679 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
2681 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2683 * MAINTAINERS (Write After Approval): Add self.
2685 2009-05-07 Joel Brobecker <brobecker@adacore.com>
2687 * gdbarch.h (target_gdbarch): Add comment documenting this global.
2689 2009-05-06 Joel Brobecker <brobecker@adacore.com>
2691 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
2693 * configure: Regenerate.
2695 2009-05-06 Joel Brobecker <brobecker@adacore.com>
2697 * utils.c: Add include of gdb_usleep.h.
2698 (defaulted_query): Detect false EOF conditions that happen
2699 on terminals opened with the O_NONBLOCK flag when there is
2702 2009-05-06 Pedro Alves <pedro@codesourcery.com>
2704 * inferior.c (add_inferior): Move observer_notify_new_inferior
2706 (add_inferior_silent): ... here.
2708 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
2709 Pedro Alves <pedro@codesourcery.com>
2711 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
2712 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
2714 (procfs_stopped_by_watchpoint): Made static, ptid argument
2716 (_initialize_procfs): Register new watchpoint related target
2718 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
2719 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
2720 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
2721 (target_insert_watchpoint, target_remove_watchpoint): Delete.
2722 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
2724 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
2725 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
2726 (target_insert_watchpoint, target_remove_watchpoint): Delete.
2727 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
2729 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
2730 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
2731 (target_insert_watchpoint, target_remove_watchpoint): Delete.
2732 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
2735 2009-05-06 Hui Zhu <teawater@gmail.com>
2737 * i386-tdep.c (i386_process_record): Change bzero to memset.
2739 2009-05-06 Hui Zhu <teawater@gmail.com>
2741 * NEWS: Add item for process record and replay.
2743 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
2745 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
2747 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
2749 * inferior.h (read_pc, write_pc): Remove.
2750 * regcache.c (read_pc, write_pc): Remove.
2752 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
2754 (handle_inferior_event): Use regcache_read_pc instead of read_pc
2755 when determining value of stop_pc. Replace subsequent uses of
2756 read_pc by inspecting already-retrieved stop_pc value.
2757 (keep_going): Use regcache_read_pc instead of read_pc.
2759 * breakpoint.c (watchpoint_check): Use current frame architecture
2760 and PC instead of current_gdbarch and read_pc ().
2761 * tracepoint.c (set_traceframe_context): Replace PC argument
2762 with FRAME argument.
2763 (trace_start_command, finish_tfind_command): Update calls.
2764 (finish_tfind_command): Compare frame IDs to identify transitions
2766 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
2767 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
2768 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
2769 of read_pc and write_pc.
2770 (store_register): Make regcache argument non-const. Update call
2771 to exec_one_dummy_insn.
2773 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
2774 * infcmd.c (post_create_inferior): Likewise.
2775 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
2776 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
2777 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
2778 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
2779 * linux-fork.c (fork_load_infrun_state): Likewise.
2780 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
2781 * record.c (record_wait): Likewise.
2782 * procfs.c (procfs_wait): Likewise.
2783 * remote-mips.c (common_open, mips_wait): Likewise.
2784 * remote-m32r-sdi.c (m32r_resume): Likewise.
2786 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
2787 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
2788 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
2789 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
2790 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
2792 * solib-darwin.c: Include "regcache.h".
2793 * solib-pa64.c: Include "regcache.h".
2794 * solib-svr4.c: Include "regcache.h.".
2796 * symfile.c: Do not mention read_pc or write_pc in comments.
2797 * dink32-rom.c: Likewise.
2798 * m32r-rom.c: Likewise.
2799 * mips-tdep.c: Likewise.
2801 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
2803 * fork-child.c (startup_inferior): Move setting stop_pc ...
2804 * infcmd.c (post_create_inferior): ... to here.
2806 2009-05-04 Michael Snyder <msnyder@vmware.com>
2808 * NEWS: Add item for reverse debugging commands.
2810 2009-05-04 Pedro Alves <pedro@codesourcery.com>
2812 * go32-nat.c (go32_stop): Delete.
2813 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
2814 (go32_create_inferior): Don't call go32_stop or
2816 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
2818 (init_go32_ops): Don't register go32_stop.
2820 2009-05-02 Eli Zaretskii <eliz@gnu.org>
2822 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
2825 * infcall.c (find_function_addr): Avoid compiler warnings for
2828 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2830 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
2831 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
2833 2009-05-01 Doug Evans <dje@google.com>
2835 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
2838 2009-05-01 Eli Zaretskii <eliz@gnu.org>
2840 * record.c (_initialize_record): Reformat and clarify doc strings
2841 for stop-at-limit and insn-number-max.
2843 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
2845 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2847 Make specifiable the make_function_type type memory ownership.
2848 * gdbtypes.c (make_function_type): New parameter `objfile', use it
2849 explicitely instead of TYPE-initialized removed local variable
2850 `objfile'. Describe `objfile' it in the function comment.
2851 (lookup_function_type): Update make_function_type callers.
2852 * gdbtypes.h (make_function_type): Update the prototype.
2853 * jv-lang.c (java_link_class_type): Update make_function_type callers.
2854 * dwarf2read.c (read_subroutine_type): Likewise.
2855 * stabsread.c (read_type): Likewise.
2857 2009-05-01 Eli Zaretskii <eliz@gnu.org>
2859 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
2860 printing a bogus "Thread <main>".
2861 (go32_thread_alive): Don't return 1 for null_ptid.
2863 * i386-tdep.c (i386_go32_init_abi): Override the number of
2864 registers due to non-support of SSE.
2866 2009-04-30 Anthony Green <green@moxielogic.com>
2868 * configure.tgt: Link the moxie simulator in with gdb.
2870 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
2872 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
2875 2009-04-30 Hui Zhu <teawater@gmail.com>
2876 Michael Snyder <msnyder@vmware.com>
2878 I386 Linux process record and replay support.
2880 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
2881 This struct has the argument for the function
2882 "record_linux_system_call".
2883 (i386_linux_intx80_sysenter_record): New function. Parse the
2884 system call instruction and call function
2885 "record_linux_system_call" to record execute log.
2886 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
2887 Set "i386_linux_intx80_sysenter_record" to
2888 "i386_intx80_record" and "i386_sysenter_record".
2890 2009-04-30 Hui Zhu <teawater@gmail.com>
2891 Michael Snyder <msnyder@vmware.com>
2893 I386 architecture process record and replay support.
2895 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
2896 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
2898 (aflag, dflag, override, modrm, mod, reg, rm, ot,
2899 i386_record_pc): New variables. Ditto.
2900 (i386_record_modrm, i386_record_lea_modrm_addr,
2901 i386_record_lea_modrm): New functions. Ditto.
2902 (i386_process_record): New function. Parse the instruction in
2903 address "addr" and record the values of registers and memory
2904 that will be changed by this instruction.
2905 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
2906 "process_record" interface.
2907 * i386-tdep.h (gdbarch_tdep): New function pointers
2908 "i386_intx80_record" and "i386_sysenter_record" that point to
2909 the function that can record "intx80" and "sysenter" execute
2912 2009-04-30 Hui Zhu <teawater@gmail.com>
2913 Michael Snyder <msnyder@vmware.com>
2915 * infrun.c (use_displaced_stepping): Return false if process
2916 record and replay target is used.
2917 (proceed): Call function "record_not_record_set" if pocess
2918 record and replay target is used.
2920 2009-04-30 Hui Zhu <teawater@gmail.com>
2921 Michael Snyder <msnyder@vmware.com>
2923 Linux process record and replay support.
2925 * Makefile.in (ALLDEPFILES): Add linux-record.c.
2926 (ALL_TARGET_OBS): Add linux-record.o.
2927 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
2928 (i[34567]86-*-linux*): Add linux-record.o.
2929 * linux-record.c, linux-record.h: New file.
2931 2009-04-30 Hui Zhu <teawater@gmail.com>
2932 Michael Snyder <msnyder@vmware.com>
2934 Process record and replay target.
2936 * Makefile.in (SFILES): Add record.c.
2937 (COMMON_OBS): Add record.o.
2938 * record.c, record.h: New file.
2940 2009-04-30 Hui Zhu <teawater@gmail.com>
2941 Michael Snyder <msnyder@vmware.com>
2943 * target.h (strata): New stratum "record_stratum".
2945 2009-04-30 Hui Zhu <teawater@gmail.com>
2946 Michael Snyder <msnyder@vmware.com>
2948 GDBARCH interface for process record and replay.
2950 * gdbarch.sh (process_record): This interface point to the
2951 function that records the inferior execute log.
2953 2009-04-29 Doug Evans <dje@google.com>
2955 * i386-nat.c (child_post_startup_inferior): Delete, unused.
2957 2009-04-29 Pedro Alves <pedro@codesourcery.com>
2959 * breakpoint.c (print_exception_catchpoint): Access `b' directly
2960 instead of `b->loc->owner'.
2961 (print_mention_exception_catchpoint): Ditto.
2963 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2965 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
2967 2009-04-27 Tom Tromey <tromey@redhat.com>
2969 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
2971 2009-04-27 Jerome Guitton <guitton@adacore.com>
2973 * symtab.c (append_exact_match_to_sals): New function, extracted
2974 from expand_line_sal.
2975 (expand_line_sal): Use append_exact_match_to_sals to append exact
2976 matches. If none found, append all best items.
2978 2009-04-27 Jerome Guitton <guitton@adacore.com>
2980 * main.c (captured_main): Move gdbinit lookups after gdb_init.
2982 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
2985 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
2986 (read_func_scope): Call inherit_abstract_dies.
2988 2009-04-25 Eli Zaretskii <eliz@gnu.org>
2990 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
2991 sparc-sol2-nat.c and sparc-sol2-tdep.c.
2993 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
2995 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
2997 ARI change: Use "/* ARI: rule */" pattern.
2998 * utils.c: Update ARI patterns.
2999 * gdb_dirent.h: Likewise.
3001 2009-04-23 Anthony Green <green@moxielogic.com>
3003 * MAINTAINERS: Add moxie target.
3004 * configure.tgt: Add moxie-*-elf target.
3005 * moxie-tdep.c: New file.
3006 * moxie-tdep.h: New file.
3008 2009-04-23 Joel Brobecker <brobecker@adacore.com>
3010 * ada-lang.c: Remove an extra empty line. No code change.
3012 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
3014 Fix double free on error inserting the breakpoint instruction.
3015 * breakpoint.c (create_breakpoints): Move the
3016 update_global_location_list call to ...
3017 (break_command_really): ... here together with the second local call
3018 both unified after all the cleanups.
3020 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
3021 Tom Tromey <tromey@redhat.com>
3023 * configure, config.in: Regenerate.
3024 * configure.ac: Support for relocatable GDB datadir. Use
3025 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
3026 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
3027 * top.c (init_main): Add "set data-directory".
3028 * defs.h (gdb_datadir): Declare.
3029 * main.c (gdb_datadir): New global.
3030 (captured_main): Initialize gdb_datadir. Use relocate_directory.
3031 (relocate_path): New function.
3032 (relocate_directory): Likewise.
3033 (get_init_files): Use relocate_path.
3034 (README): Mention --with-gdb-datadir.
3036 2009-04-23 Joel Brobecker <brobecker@adacore.com>
3038 * ada-tasks (task_command_1): Call target_find_new_threads.
3040 2009-04-23 Joel Brobecker <brobecker@adacore.com>
3042 * stack.c (do_gdb_disassembly): Print the exception message if an
3043 error was thrown while trying to perform the disassembly.
3045 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
3047 * varobj.c (free_variable): Replace free_current_contents by xfree.
3049 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
3051 * arm-linux-nat.c (fetch_register, store_register): Use
3052 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
3053 * arm-linux-tdep.c (arm_linux_supply_gregset,
3054 arm_linux_collect_gregset): Likewise.
3055 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
3056 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
3058 2009-04-22 Hui Zhu <teawater@gmail.com>
3060 * stack.c (_initialize_stack): Set the default of
3061 disassemble-next-line to off.
3063 2009-04-21 Tom Tromey <tromey@redhat.com>
3065 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
3066 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
3068 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
3070 * configure.ac: Add quotes to not lose brackets in help text.
3071 * configure: Rebuild.
3073 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
3075 * configure.ac: Don't postprocess Makefile in config.status.
3076 Substitute GDB_NM_FILE. Don't substitute nm_h.
3077 * Makefile.in (GDB_NM_FILE): Substitute.
3078 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
3079 * configure: Regenerate.
3080 * gnulib/Makefile.in: Regenerate.
3082 2009-04-21 Joseph Myers <joseph@codesourcery.com>
3084 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
3085 --with-htmldir): New.
3086 * configure: Regenerate.
3088 2009-04-21 Tom Tromey <tromey@redhat.com>
3090 * configure: Rebuild.
3091 * configure.ac: Use lower case for start of help strings. Clean
3092 up --with-sysroot help.
3094 2009-04-21 Tom Tromey <tromey@redhat.com>
3096 * configure: Rebuild.
3097 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
3098 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
3101 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
3103 ARI fix: remove "%p".
3104 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
3105 (ia64_sigtramp_frame_this_id): Ditto.
3106 (ia64_libunwind_frame_this_id): Ditto.
3107 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
3108 * symmisc.c (maintenance_info_psymtabs): Ditto.
3110 2009-04-21 Joseph Myers <joseph@codesourcery.com>
3112 * configure.ac (--with-relocated-sources): New.
3113 * configure, config.in: Regenerate.
3114 * source.c (add_substitute_path_rule): Remove static.
3115 * source.h (add_substitute_path_rule): Declare.
3116 * main.c: Include "source.h".
3117 (captured_main): Add substitution rule if RELOC_SRCDIR.
3119 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
3121 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
3123 2009-04-20 David Daney <ddaney@caviumnetworks.com>
3125 * NEWS: Mention MIPS/Linux hardware watchpoint support.
3127 2009-04-20 David Daney <ddaney@caviumnetworks.com>
3129 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
3130 (maint_show_dr, super_close): New variables.
3131 (super_fetch_registers, super_store_registers): Make static.
3132 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
3133 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
3134 (pt_watch_style): Define new enum.
3135 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
3137 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
3139 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
3140 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
3141 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
3142 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
3143 (type_to_irw, fill_mask, try_one_watch)
3144 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
3145 (mips_linux_new_thread, populate_regs_from_watches)
3146 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
3147 (mips_linux_close): New functions.
3148 (_initialize_mips_linux_nat): Register watchpoint functions with
3149 the target_ops. Add show-debug-regs maintenance command.
3151 2009-04-20 David Daney <ddaney@caviumnetworks.com>
3153 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
3155 2009-04-19 Pedro Alves <pedro@codesourcery.com>
3157 * NEWS: Mention gdbserver support for x86 Windows CE.
3159 2009-04-19 Eli Zaretskii <eliz@gnu.org>
3161 * config/djgpp/fnchange.lst: Fix typos.
3163 Set default host and target charsets in the DJGPP port.
3165 * config/djgpp/config.sed (am_cv_langinfo_codeset)
3166 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
3167 in all configure scripts that define ac_cv_env_CPP_value.
3169 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
3172 * config/djgpp/nl_types.h: New file.
3174 * config/djgpp/langinfo.h: New file.
3176 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
3178 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
3180 * Makefile.in (MAKEHTML): Set to makeinfo --html.
3181 (MAKEHTMLFLAGS): Set to empty.
3183 2009-04-18 Eli Zaretskii <eliz@gnu.org>
3185 * NEWS: Mention all new set/show commands added since GDB 6.8 was
3188 * go32-nat.c (go32_sysinfo): Check if the call to
3189 __dpmi_get_capabilities fills the buffer with information, and
3190 don't use the buffer if not.
3192 2009-04-17 Tom Tromey <tromey@redhat.com>
3194 * charset.c (_initialize_charset): Add special case for "646".
3196 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
3198 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
3199 * configure: Regenerate.
3200 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
3201 configure substitutions.
3202 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
3204 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
3206 ARI fix: Do not use %p, replace by call to host_address_to_string
3208 * darwin-nat.c (darwin_xfer_partial): Apply change.
3209 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
3210 * gnu-nat.h (proc_debug): Ditto.
3211 * symmisc.c (maintenance_info_symtabs): Ditto.
3212 (maintenance_info_psymtabs): Ditto.
3213 * windows-nat.c (handle_load_dll): Ditto.
3214 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
3215 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
3217 2009-04-17 Joseph Myers <joseph@codesourcery.com>
3219 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
3220 --enable-64-bit-bfd.
3221 (sparc-*-linux*): Likewise.
3223 2009-04-17 Eli Zaretskii <eliz@gnu.org>
3225 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
3228 2009-04-16 Pedro Alves <pedro@codesourcery.com>
3230 * remote.c (remote_query_attached): Fix pasto in packet_ok result
3233 2009-04-16 Joel Brobecker <brobecker@adacore.com>
3235 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
3236 Revert the previous change. Might not be correct, actually.
3238 2009-04-16 Joel Brobecker <brobecker@adacore.com>
3240 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
3241 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
3242 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
3243 Remove declaration. These are non-existent functions.
3245 2009-04-16 Joel Brobecker <brobecker@adacore.com>
3247 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
3248 Fix a compilation warning on mips-irix due to casting from
3249 a pointer of different size.
3251 2009-04-16 Joel Brobecker <brobecker@adacore.com>
3253 * ada-lang.c (symtab_for_sym): Delete.
3254 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
3256 2009-04-16 Joel Brobecker <brobecker@adacore.com>
3258 * ada-lang.c (extract_string): Delete.
3259 (ada_main_name): Reimplement using target_read_string instead of
3262 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
3264 * m68klinux-nat.c: Remove obsolete comment.
3265 (fetch_register, store_register): Don't call
3266 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
3267 which are always nops here.
3269 2009-04-14 Tom Tromey <tromey@redhat.com>
3271 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
3272 (c_printstr): Likewise.
3273 * charset.c: Include gdb_wait.h.
3274 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
3275 (find_charset_names): Use pexecute. Handle libiconv's output.
3277 (_initialize_charset): Use xstrdup.
3278 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
3280 (INTERMEDIATE_ENCODING): New define.
3281 * configure, config.in: Rebuild.
3282 * configure.ac: Check for btowc.
3284 2009-04-15 Tom Tromey <tromey@redhat.com>
3286 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
3288 2009-04-15 Eli Zaretskii <eliz@gnu.org>
3290 * utils.c (parse_escape): Initialize target_char to pacify GCC.
3292 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
3294 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
3296 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
3298 ARI fix: sprintf rule.
3299 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
3300 * ada-lang.c (add_angle_brackets): Use xstrprintf.
3301 (ada_decode): Replace sprintf by xsnprintf.
3302 (find_old_style_renaming_symbol): Ditto.
3303 (ada_to_fixed_type_1, ada_enum_name): Ditto.
3306 2009-04-14 Joel Brobecker <brobecker@adacore.com>
3308 * target.c (target_mourn_inferior): Call bfd_cache_close_all
3309 after having executed the target mourn_inferior routine.
3311 2009-04-14 Eli Zaretskii <eliz@gnu.org>
3313 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
3316 2009-04-13 David Daney <ddaney@caviumnetworks.com>
3318 * infrun.c (maybe_software_singlestep): New function.
3319 (resume): Call maybe_software_singlestep.
3320 (handle_inferior_event): Same.
3322 2009-04-13 Tom Tromey <tromey@redhat.com>
3324 * python/python-frame.c (frapy_richcompare): Return
3325 Py_NotImplemented, not an error. Handle Py_NE as well.
3327 2009-04-13 Eli Zaretskii <eliz@gnu.org>
3329 * charset.c (EILSEQ): Define if not defined by system headers.
3331 2009-04-11 Eli Zaretskii <eliz@gnu.org>
3333 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
3334 to be consistent with renaming config.intl.in into config_intl.in.
3336 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
3337 consistent with the change from 2008-11-09.
3339 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3341 * gdbtypes.c: Remove excessive parentheses at the return keywords.
3342 * varobj.c (varobj_invalidate): Fix indentation.
3343 * varobj.c (varobj_invalidate): Fix formatting text width.
3345 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
3347 Implement -exec-jump.
3349 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
3350 * mi/mi-main.c (mi_cmd_exec_jump): New.
3351 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
3353 2009-04-07 Doug Evans <dje@google.com>
3355 * symfile.c (symbol_file_clear): Fix indentation.
3357 2009-04-06 Mark Kettenis <kettenis@gnu.org>
3359 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
3361 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
3363 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
3364 (ppc_linux_auxv_parse): New function.
3365 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
3366 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
3368 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
3370 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
3371 BFD to contents of SPU name note.
3372 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
3373 with "from_tty" argument 1 instead of 0.
3375 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3378 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
3379 Create the symbol in local scope.
3380 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
3382 2009-04-02 Keith Seitz <keiths@redhat.com>
3384 * stabsread.c (read_member_functions): GCC may emit an extra space
3385 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
3386 whitespace when looking for these functions.
3388 2009-04-01 Joel Brobecker <brobecker@adacore.com>
3390 Change the default value for "set print frame-arguments" to scalars.
3392 * stack.c (print_frame_arguments): Set initial value to "scalars".
3394 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
3396 * mips-tdep.c (mips_numeric_register_alieses): New definition.
3397 (mips_gdbarch_init): Add user registers from
3398 mips_numeric_register_aliases.
3400 2009-04-01 Joel Brobecker <brobecker@adacore.com>
3402 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
3404 2009-04-01 Joel Brobecker <brobecker@adacore.com>
3406 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
3407 this is the last one.
3409 2009-04-01 Pedro Alves <pedro@codesourcery.com>
3411 * remote.c (append_resumption): New.
3412 (remote_vcont_resume): Use it.
3414 2009-04-01 Joel Brobecker <brobecker@adacore.com>
3416 * windows-nat.c (+windows_get_ada_task_ptid): New function.
3417 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
3419 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
3420 Keith Seitz <keiths@redhat.com>
3421 Jan Kratochvil <jan.kratochvil@redhat.com>
3424 * Makefile.in (dbxread.o): Update.
3425 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
3426 * dwarf2read.c (GDB_FORM_cached_string): New.
3427 (read_partial_die): Use dwarf2_canonicalize_name.
3428 (dwarf2_linkage_name): Use dwarf2_name.
3429 (dwarf2_canonicalize_name): New.
3430 (dwarf2_name): Use dwarf2_canonicalize_name.
3431 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
3432 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
3433 * symtab.c (lookup_symbol_in_language): Canonicalize input before
3435 * cp-name-parser.y: operator() requires two parameters,
3436 according to libiberty.
3437 * minsyms.c (lookup_minimal_symbol): Canonicalize input
3441 2009-03-31 Joel Brobecker <brobecker@adacore.com>
3443 Provide support for (Ada) task-specific breakpoints.
3445 * ada-lang.h (ada_get_task_number): Add declaration.
3446 (breakpoint_ada_task_match): Delete declaration.
3447 * ada-tasks.c (ada_get_task_number): Make non-static.
3448 * breakpoint.h (struct breakpoint): Add field "task".
3449 * breakpoint.c (print_one_breakpoint_location): Add handling of
3450 task-specific breakpoints.
3451 (create_breakpoint, create_breakpoints, find_condition_and_thread):
3452 New parameter "task".
3453 (break_command_really): Update calls to find_condition_and_thread
3454 and create_breakpoints.
3455 (breakpoint_re_set_one): Update call to find_condition_and_thread.
3458 2009-03-31 Joel Brobecker <brobecker@adacore.com>
3460 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
3462 2009-03-31 Pedro Alves <pedro@codesourcery.com>
3464 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
3465 if the thread's ptid without a thread id field is in the list
3466 before calling thread_change_ptid.
3467 (extended_remote_attach_1): In non-stop mode, do not rely on
3468 querying the current thread, instead, query the thread list, and
3469 select the first thread of the process.
3470 * gdbthread.h (first_thread_of_process): Declare.
3471 * thread.c (first_thread_of_process): Define.
3473 2009-03-30 Stan Shebs <stan@codesourcery.com>
3475 Make tracepoints into a type of breakpoint.
3476 * breakpoint.h (enum bptype): Add bp_tracepoint.
3477 (struct breakpoint): Add fields step_count, pass_count, actions.
3478 (get_tracepoint, get_tracepoint_by_number): Declare.
3479 (all_tracepoints): Declare.
3480 * breakpoint.c: Include tracepoint.h, readline.h.
3481 (ALL_TRACEPOINTS): Move here from tracepoint.c.
3482 (tracepoint_count): Ditto.
3483 (should_be_inserted): GDB does not insert tracepoints itself.
3484 (print_it_typical): Add tracepoint case.
3485 (bpstat_what): Ditto.
3486 (print_one_breakpoint_location): Ditto, and add printing for
3487 pass count, step count, and action list.
3488 (user_settable_breakpoint): Add tracepoint case.
3489 (allocate_bp_location): Ditto.
3490 (set_breakpoint_location_function): Ditto.
3491 (disable_breakpoints_in_shlibs): Ditto.
3493 (break_command_really): Add argument traceflag, use to choose
3494 basic breakpoint type.
3495 (break_command_1): Pass extra argument.
3496 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
3497 (breakpoint_re_set_one): Add tracepoint case.
3498 (disable_command, enable_command): Ditto.
3499 (set_tracepoint_count): Move here from tracepoint.c.
3500 (trace_command): Move here from tracepoint.c and use
3501 break_command_really.
3502 (tracepoints_info): Move here from tracepoint.c and call
3504 (enable_trace_command): Move here from tracepoint.c and call
3506 (disable_trace_command): Move here from tracepoint.c and call
3508 (delete_trace_command): Move here from tracepoint.c and call
3510 (trace_pass_command): Move here from tracepoint.c.
3511 (get_tracepoint_by_number): Ditto.
3512 (tracepoint_save_command): Ditto.
3513 (get_tracepoint): New function.
3514 (all_tracepoints): New function.
3515 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
3516 deprecate "enable trace" and "disable trace" commands.
3517 * tracepoint.h (struct tracepoint): Remove.
3518 (tracepoint_chain): Remove decl.
3519 (deprecated_create_tracepoint_hook): Remove decl.
3520 (deprecated_delete_tracepoint_hook): Remove decl.
3521 (deprecated_modify_tracepoint_hook): Remove decl.
3522 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
3523 (free_actions): Update signature.
3524 (validate_actionline): Update signature.
3525 (end_actions_pseudocommand): Declare.
3526 (while_stepping_pseudocommand): Declare.
3527 * tracepoint.c: Include breakpoint.h.
3528 (tracepoint_chain, tracepoint_count): Remove.
3529 (free_actions, make_cleanup_free_actions): Update signature.
3530 (trace_command, set_raw_tracepoint): Remove.
3531 (trace_mention): Remove.
3532 (tracepoints_info): Remove.
3533 (tracepoint_operation, map_args_over_tracepoints): Remove.
3534 (get_tracepoint_by_number): Remove.
3535 (enable_trace_command, disable_trace_command): Remove.
3536 (delete_trace_command, trace_pass_command): Remove.
3537 (trace_actions_command, read_actions): Update signature.
3538 (validate_actionline): Update signature, use bp loc.
3539 (encode_actions): Ditto.
3540 (download_tracepoint): New function, body of trace_start_command.
3541 (trace_start_command): Call it, use all_tracepoints.
3542 (tracepoint_save_command): Remove.
3543 (tracepoint_dump_command): Use get_tracepoint.
3544 (end_actions_pseudocommand): Make globally visible.
3545 (while_stepping_pseudocommand): Ditto.
3546 (_initialize_tracepoint): Move command definitions to breakpoint.c.
3548 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
3550 Expose frames to Python.
3551 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
3552 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
3553 (python-frame.o): New target.
3554 * python/python-frame.c: New file.
3555 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
3556 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
3557 gdbpy_initialize_frames): New prototypes.
3558 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
3559 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
3561 * stack.c (find_frame_funname): New function, factored out of
3563 (print_frame): Call find_frame_funname.
3564 * stack.h (find_frame_funname): Add prototype.
3566 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
3568 Remove unused value_object attribute `owned_by_gdb'.
3569 * python/python-value.c (value_object): Remove owned_by_gdb
3571 (valpy_dealloc): Remove reference to self->owned_by_gdb.
3572 (valpy_new): Likewise.
3573 (value_to_value_object): Likewise.
3575 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
3577 Change gdb.Value.address from a method to an attribute.
3578 * python/python-value.c (value_object): Add `address' element.
3579 (valpy_dealloc): Decrement reference to self->address if set.
3580 (valpy_new): Initialize val_obj->address.
3581 (valpy_address): Rename to ...
3582 (valpy_get_address): ... this. Change signature from method to
3583 attribute. Update self->address if not set.
3584 (value_to_value_object): Initialize val_obj->address.
3585 (value_object_getset): Add `address' element.
3586 (value_object_methods): Remove `address' element.
3588 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
3590 * observer.sh: Set LANG/LC_ALL to C, not c.
3592 2009-03-28 Kevin Buettner <kevinb@redhat.com>
3594 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
3597 2009-03-28 Pedro Alves <pedro@codesourcery.com>
3599 * remote.c (remote_stop_ns): If multi-process extensions are off,
3600 and GDB is requesting the whole process to stop, sent "vCont;t",
3603 2009-03-28 Pedro Alves <pedro@codesourcery.com>
3605 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
3608 2009-03-27 Eli Zaretskii <eliz@gnu.org>
3610 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
3612 2009-03-26 Doug Evans <dje@google.com>
3614 * thread.c (do_restore_current_thread_cleanup): Redo test for
3615 whether to restore old->inferior_ptid.
3617 2009-03-26 Tom Tromey <tromey@redhat.com>
3619 * breakpoint.c (resolve_sal_pc): Preserve original line number
3620 when skipping prologue.
3622 2009-03-26 Doug Evans <dje@google.com>
3624 * thread.c (inferior_thread) Remove "extern" in definition.
3626 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
3628 Add gdb.Value.is_optimized_out attribute.
3629 * python/python-value.c (valpy_get_is_optimized_out): New
3631 (value_object_getset): New variable.
3632 (value_object_type): Initialize tp_getset element.
3634 2009-03-26 Joel Brobecker <brobecker@adacore.com>
3636 Recognize missing DW_AT_location as <value optimized out>.
3638 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
3639 Call add_symbol_to_list.
3641 2009-03-25 Tom Tromey <tromey@redhat.com>
3643 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
3644 * stack.c (print_this_frame_argument_p): Use check_typedef.
3646 2009-03-25 Tom Tromey <tromey@redhat.com>
3648 * configure: Rebuild.
3649 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
3650 Rearrange flags setting. Add comments.
3652 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
3654 * config/i386/nm-i386.h: Remove code within
3655 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
3656 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
3658 * config/i386/nm-cygwin64.h: Ditto.
3659 * config/i386/nm-fbsd.h: Ditto.
3660 * config/i386/nm-go32.h: Ditto.
3661 * config/i386/nm-linux.h: Ditto.
3662 * config/i386/nm-linux64.h: Ditto.
3664 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
3666 ARI fix: "xasprintf" rule.
3667 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
3669 2009-03-25 Pedro Alves <pedro@codesourcery.com>
3671 * remote.c (remote_start_remote): In non-stop mode, call
3672 init_wait_for_inferior before adding threads and inferiors.
3674 2009-03-25 Joel Brobecker <brobecker@adacore.com>
3676 * breakpoint.c (breakpoint_thread_match): Split a large condition
3677 into several smaller conditions. No behavior change.
3679 2009-03-25 Pedro Alves <pedro@codesourcery.com>
3681 * infrun.c (infrun_thread_thread_exit): New.
3682 (_initialize_infrun): Attach it to the thread_exit observer.
3683 * thread.c (delete_thread_1): Always call the observer, passing it
3685 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
3686 SILENT, return immediately.
3688 2009-03-25 Pedro Alves <pedro@codesourcery.com>
3690 * infrun.c (normal_stop): Use has_stack_frames instead of
3692 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
3693 when there is no thread selected.
3694 (mi_cmd_execute): Don't special case commands that can run without
3695 a valid selected thread.
3696 * top.c (execute_command): Don't special case commands that can
3697 run without a valid selected thread. Use has_stack_frames.
3698 * infcmd.c (ensure_valid_thread): New.
3699 (continue_1, step_1, jump_command, signal_command): Use it.
3700 (detach_command): Error out if there's no selected thread/inferior.
3701 * thread.c (print_thread_info): Allow having no thread selected.
3702 (switch_to_thread): Don't read the PC if there is no current thread.
3703 (do_restore_current_thread_cleanup): Don't record the current
3704 frame if there is no current thread.
3705 (make_cleanup_restore_current_thread): Don't read frame info if
3706 there is no selected thread.
3707 (_initialize_thread): Don't mark commands as
3708 "no_selected_thread_ok".
3709 * frame.c (get_current_frame): Error out if there is no valid
3711 (has_stack_frames): Return false if there is no valid
3713 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
3714 "no_selected_thread_ok".
3715 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
3716 (get_cmd_no_selected_thread_ok): Delete.
3717 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
3718 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
3720 * stack.c (get_selected_block): Use has_stack_frames.
3722 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
3724 Fix size of FPSCR in Power 7 processors.
3725 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
3726 (PPC_FEATURE_HAS_DFP): New #define.
3727 (ppc_linux_read_description): Check for DFP feature instead of
3728 ISA 2.05 to decide on size of the FPSCR.
3730 2009-03-25 Kevin Buettner <kevinb@redhat.com>
3732 * mn10300-tdep.c (trad-frame.h): Don't include.
3733 (prologue-value.h): Include.
3734 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
3735 (struct mn10300_prologue): Define.
3736 (push_reg, translate_rreg, check_for_saved): New functions.
3737 (mn10300_analyze_prologue): Rewrite, using prologue-value
3738 machinery. Handle more instructions than before. Permit
3739 instructions to occur in any order.
3740 (mn10300_skip_prologue): Find the extents of the function
3741 in question; mn10300_analyze_prologue no longer does this.
3742 (mn10300_analyze_frame_prologue): New function.
3743 (mn10300_frame_base): New function.
3744 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
3746 (mn10300_frame_prev_register): Likewise.
3747 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
3748 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
3750 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
3752 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
3754 Fix completer problem for filename completion on the first try.
3756 * gdb/completer.h (gdb_completion_word_break_characters): New function.
3757 * gdb/completer.c: Include gdb_assert.h.
3758 (complete_line_internal_reason): New enum.
3759 (complete_line_internal): Change last argument type to
3760 complete_line_internal_reason.
3761 Modify function to handle the different complete_line_internal_reason
3763 (complete_line): Adapt to change in complete_line_internal.
3764 (command_completer): Ditto.
3765 (gdb_completion_word_break_characters): Implement new function.
3766 * top.c (init_main): Set rl_completion_word_break_hook to
3767 gdb_completion_word_break_characters.
3770 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
3772 ARI fix: "strlen d_name" rule.
3773 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
3776 2009-03-24 Tom Tromey <tromey@redhat.com>
3777 Pedro Alves <pedro@codesourcery.com>
3779 * configure, config.in: Rebuild.
3780 * configure.ac: Check for libiconvlist.
3781 * charset.c: Check HAVE_LIBICONVLIST.
3782 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
3783 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
3784 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
3786 (INTERNAL_CFLAGS_BASE): Update.
3787 (INTERNAL_LDFLAGS): Update.
3790 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
3792 * configure.ac: Initialize the variable $PREFER_CURSES.
3793 * configure: Regenerated.
3795 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
3797 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
3798 * configure: Regenerated.
3800 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
3802 ARI fix: "strerror" rule.
3803 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
3804 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
3806 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3808 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
3809 before looking up the fields inside our struct type.
3811 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3813 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
3814 trying to resolve the type qualification.
3816 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3818 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
3819 we try to apply the attribute on the real type, rather than
3820 its associated typedef.
3822 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3824 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
3825 to make sure we try to get the modulus of the actual type, not the
3828 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3830 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
3831 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
3832 to get the real type, not the associated typedef.
3834 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3836 * ada-lang.c (ada_get_field_index): Add handling of the case
3837 when TYPE is a typedef of a struct.
3839 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3841 Add gdb_usleep as a portable version of usleep based on gdb_select.
3842 * gdb_usleep.h, gdb_usleep.c: New files.
3843 * Makefile.in (SFILES): Add gdb_usleep.c.
3844 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
3845 (COMMON_OBS): Add gdb_usleep.o.
3846 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
3847 by call to gdb_usleep.
3849 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3851 * buildsym.c (end_symtab): If we ignore the subfiles, then
3852 unlink the associated symtabs if they were already allocated.
3854 2009-03-23 Jerome Guitton <guitton@adacore.com>
3856 Provide a way to force building of GDB with libcurses.
3857 * configure.ac: Add --with-curses.
3858 * configure: Regenerated.
3860 2009-03-23 Tom Tromey <tromey@redhat.com>
3862 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
3865 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
3867 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
3868 solib_contains_address_p instead of searching.
3870 2009-03-23 Tom Tromey <tromey@redhat.com>
3872 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
3873 (iconv): Make 'inbuf' argument const.
3874 (convert_between_encodings): Use ICONV_CONST.
3875 (wchar_iterate): Likewise.
3877 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
3879 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
3880 dynamically loaded function.
3881 (LookupPrivilegeValueA): Ditto.
3882 (OpenProcessToken): Ditto.
3883 (AdjustTokenPrivileges): Rename and define placeholder for address of
3884 dynamically loaded function.
3885 (LookupPrivilegeValueA): Ditto.
3886 (OpenProcessToken): Ditto.
3887 (set_process_privilege): Remove check for loaded functions.
3888 (bad_OpenProcessToken): Define.
3889 (_initialize_loadable): Load token functions from advapi here, setting
3890 OpenProcessToken function to a dummy static function which always return
3891 error if OS doesn't support this functionality.
3893 2009-03-22 Nicolas Roche <roche@adacore.com>
3894 Christopher Faylor <me+cygwin@cgf.cx>
3896 * win32-nat.c (ctrl_c_handler): New function.
3897 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
3898 is run in a separate console.
3900 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
3902 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
3903 for dynamically loaded function.
3904 (DebugBreakProcess): Ditto.
3905 (DebugSetProcessKillOnExit): Ditto.
3906 (EnumProcessModules): Ditto.
3907 (GetModuleFileNameExA): Ditto.
3908 (GetModuleInformation): Ditto.
3909 (DebugActiveProcessStop): Rename and define placeholder for address of
3910 dynamically loaded function.
3911 (DebugBreakProcess): Ditto.
3912 (DebugSetProcessKillOnExit): Ditto.
3913 (EnumProcessModules): Ditto.
3914 (GetModuleFileNameExA): Ditto.
3915 (GetModuleInformation): Ditto.
3916 (psapi_loaded): Delete.
3917 (get_module_name): Don't check psapi_loaded, just rely on the fact that
3918 dynamically loaded functions will return failure if they weren't
3920 (has_detach_ability): Delete.
3921 (windows_attach): Remove call to has_detach_ability (). Just rely on
3922 functions being callable.
3923 (bad_DebugActiveProcessStop): Define.
3924 (bad_DebugBreakProcess): Ditto.
3925 (bad_DebugSetProcessKillOnExit): Ditto.
3926 (bad_EnumProcessModules): Ditto.
3927 (bad_GetModuleFileNameExA): Ditto.
3928 (bad_GetModuleInformation): Ditto.
3929 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
3930 dynamic storage here, setting nonexistent functions to dummy static
3931 functions which always return error.
3933 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3935 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
3936 to the about_to_proceed observer notification.
3937 (mi_about_to_proceed): New.
3938 (mi_on_resume): Only output ^running and the prompt here if the
3939 target was proceeded.
3940 * breakpoint.c (breakpoint_proceeded): New static.
3941 (breakpoint_about_to_proceed): New.
3942 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
3943 the about_to_proceed observer notification.
3944 * inferior.h (breakpoint_proceeded): Delete declaration.
3945 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
3946 Notify the about_to_proceed observers.
3947 (struct inferior_status): Delete breakpoint_proceeded member.
3948 (save_inferior_status): Don't save it.
3949 (restore_inferior_status): Don't restore it.
3950 * mi-main.h (mi_proceeded): Declare.
3951 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
3954 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3956 * gdbthread.h (struct thread_info): Add in_infcall member.
3957 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
3958 Remove reverences to suppress_resume_observer. Refresh
3959 `call_thread' after returning from `proceed'.
3960 * infcmd.c (suppress_resume_observer): Delete.
3961 * inferior.h (suppress_resume_observer): Delete declaration.
3962 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
3964 * thread.c (set_running): Remove references to
3965 suppress_resume_observer.
3966 * infrun.c (struct inferior_status): Add in_infcall member.
3967 (save_inferior_status): Save it.
3968 (restore_inferior_status): Restore it.
3970 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3972 * infcall.c (run_inferior_call): Remove references to
3973 suppress_stop_observer.
3974 * infcmd.c (suppress_stop_observer): Delete.
3975 (finish_command_continuation): Remove NOTE. Don't clear
3976 suppress_stop_observer anymore.
3977 (finish_command_continuation_free_arg): Likewise.
3978 (finish_forward): Remove references to suppress_stop_observer.
3979 Call normal_stop observer if we haven't already.
3980 * inferior.h (suppress_stop_observer): Delete.
3981 * infrun.c (normal_stop): When deciding to suppress the
3982 normal_stop observer, check for proceed_to_finish instead of
3983 suppress_stop_observer.
3985 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3987 * symfile.c (symfile_relocate_debug_section): Remove check for
3990 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3991 Jim Blandy <jimb@red-bean.com>
3992 Thiago Jung Bauermann <bauerman@br.ibm.com>
3993 Tom Tromey <tromey@redhat.com>
3995 Miscellaneous fixes to the Python code.
3996 * python/python-cmd.c (cmdpy_init): Accept keyword
3998 * python/python-value.c (valpy_string): Accept keyword
4000 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
4001 Do not call value_to_value_object on NULL RES_VAL.
4002 (value_object_methods): Change `string' entry to also accept
4004 (convert_value_from_python): Return a copy of the value if obj is
4006 (value_object_methods): Mark the `string' method as accepting
4007 keywords, and show method "prototype" in the doc string.
4008 * python/python.c (get_parameter): Don't return inside a
4011 2009-03-20 Tom Tromey <tromey@redhat.com>
4013 Add support for convenience functions in Python.
4014 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
4015 (SUBDIR_PYTHON_SRCS): Add python-function.c.
4016 (python-function.o): New target.
4017 * eval.c: Include "python/python.h" and <ctype.h>.
4018 (evaluate_subexp_standard): Handle values of type
4019 TYPE_CODE_INTERNAL_FUNCTION.
4020 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
4021 * parse.c (write_exp_string): Remove duplicate word in comment.
4022 * python/python-function.c: New file.
4023 * python/python-internal.h (gdbpy_initialize_functions): Add
4025 * python/python.c (_initialize_python): Call
4026 gdbpy_initialize_functions.
4027 * valprint.c (value_check_printable): Handle values of type
4028 TYPE_CODE_INTERNAL_FUNCTION.
4029 * value.c: Include "cli/cli-decode.h".
4030 (internal_function): New struct.
4031 (functionlist, internal_fn_type): New static variables.
4032 (lookup_only_internalvar,
4033 lookup_internalvar): Add const qualifier to name argument.
4034 (create_internalvar): Likewise. Initialize new field.
4035 (set_internal_var): Fix typo in comment. Don't allow assignment
4036 to canonical variable.
4037 (value_create_internal_function, value_internal_function_name,
4038 call_internal_function, function_command, function_destroyer,
4039 add_internal_function): New functions.
4040 (_initialize_values): Create `function' placeholder command.
4041 Initialize internal_fn_type.
4042 * value.h (lookup_only_internalvar, create_internalvar,
4043 lookup_internalvar): Add const qualifier to name argument.
4044 (internal_function_fn, add_internal_function, call_internal_function,
4045 value_internal_function_name): Add prototypes.
4046 (struct internalvar) <canonical>: New field.
4048 2009-03-20 Tom Tromey <tromey@redhat.com>
4050 * c-lang.c (evaluate_subexp_c): Call check_typedef.
4052 2009-03-20 Tom Tromey <tromey@redhat.com>
4053 Julian Brown <julian@codesourcery.com>
4055 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
4056 PR i18n/9401, PR exp/9613:
4058 * value.h (value_typed_string): Declare.
4059 (val_print_string): Update.
4060 * valprint.h (print_char_chars): Update.
4061 * valprint.c (print_char_chars): Add type argument. Update.
4062 (val_print_string): Likewise.
4063 * valops.c (value_typed_string): New function.
4064 * utils.c (host_char_to_target): New function.
4065 (parse_escape): Use host_char_to_target, host_hex_value. Update.
4067 (no_control_char_error): Remove.
4068 * typeprint.c (print_type_scalar): Update.
4069 * scm-valprint.c (scm_scmval_print): Update.
4070 * scm-lang.h (scm_printchar, scm_printstr): Update.
4071 * scm-lang.c (scm_printchar): Add type argument.
4072 (scm_printstr): Likewise.
4073 * printcmd.c (print_formatted): Update.
4074 (print_scalar_formatted): Update.
4075 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
4076 Handle '%lc' and '%ls'.
4077 * parser-defs.h (struct typed_stoken): New type.
4078 (struct stoken_vector): Likewise.
4079 (write_exp_string_vector): Declare.
4080 * parse.c (write_exp_string_vector): New function.
4081 * p-valprint.c (pascal_val_print): Update.
4082 * p-lang.h (is_pascal_string_type, pascal_printchar,
4083 pascal_printstr): Update.
4084 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
4085 Add 'char_type' argument.
4086 (pascal_emit_char): Add type argument.
4087 (pascal_printchar): Likewise.
4088 (pascal_printstr): Likewise.
4089 * objc-lang.c (objc_emit_char): Add type argument.
4090 (objc_printchar): Likewise.
4091 (objc_printstr): Likewise.
4092 * macroexp.c (get_character_constant): Handle unicode characters.
4094 (get_string_literal): Handle unicode strings. Use
4096 * m2-valprint.c (print_unpacked_pointer): Update.
4097 (m2_print_array_contents): Update.
4098 (m2_val_print): Update.
4099 * m2-lang.c (m2_emit_char): Add type argument.
4100 (m2_printchar): Likewise.
4101 (m2_printstr): Likewise.
4102 * language.h (struct language_defn) <la_printchar>: Add type
4104 <la_printstr, la_emitchar>: Likewise.
4105 (LA_PRINT_CHAR): Likewise.
4106 (LA_PRINT_STRING): Likewise.
4107 (LA_EMIT_CHAR): Likewise.
4108 * language.c (unk_lang_emit_char): Add type argument.
4109 (unk_lang_printchar): Likewise.
4110 (unk_lang_printstr): Likewise.
4111 * jv-valprint.c (java_val_print): Update.
4112 * jv-lang.c (java_emit_char): Add type argument.
4113 * f-valprint.c (f_val_print): Update.
4114 * f-lang.c (f_emit_char): Add type argument.
4115 (f_printchar): Likewise.
4116 (f_printstr): Likewise.
4117 * expprint.c (print_subexp_standard): Update.
4118 * charset.h (target_wide_charset): Declare.
4119 (c_target_char_has_backslash_escape, c_parse_backslash,
4120 host_char_print_literally, host_char_to_target,
4121 target_char_to_host, target_char_to_control_char): Remove.
4122 (enum transliterations): New type.
4123 (convert_between_encodings): Declare.
4124 (HOST_ESCAPE_CHAR): New define.
4125 (host_letter_to_control_character, host_hex_value): Declare.
4126 (enum wchar_iterate_result): New enum.
4127 (struct wchar_iterator): Declare.
4128 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
4129 wchar_push_back): Declare.
4130 * charset-list.h: New file.
4131 * c-valprint.c (textual_name): New function.
4132 (textual_element_type): Handle wide character types.
4133 (c_val_print): Pass original type to textual_element_type. Handle
4134 wide character types.
4135 (c_value_print): Use textual_element_type. Pass original type of
4137 * c-lang.h (enum c_string_type): New type.
4138 (c_printchar, c_printstr): Update.
4139 * c-lang.c (classify_type): New function.
4140 (print_wchar): Likewise.
4141 (c_emit_char): Add type argument. Handle wide characters.
4142 (c_printchar): Likewise.
4143 (c_printstr): Add type argument. Handle wide and multibyte
4145 (convert_ucn): New function.
4146 (emit_numeric_character): Likewise.
4147 (convert_octal): Likewise.
4148 (convert_hex): Likewise.
4149 (ADVANCE): New macro.
4150 (convert_escape): New function.
4151 (parse_one_string): Likewise.
4152 (evaluate_subexp_c): Likewise.
4153 (exp_descriptor_c): New global.
4154 (c_language_defn): Use exp_descriptor_c.
4155 (cplus_language_defn): Likewise.
4156 (asm_language_defn): Likewise.
4157 (minimal_language_defn): Likewise.
4158 (charset_for_string_type): New function.
4159 * c-exp.y (%union): Add 'svec' and 'tsval'.
4161 (exp): Add CHAR production.
4162 (string_exp): Rewrite.
4163 (exp) <string_exp>: Rewrite.
4164 (tempbuf): Now global.
4165 (tempbuf_init): New global.
4166 (parse_string_or_char): New function.
4167 (yylex) <tempbuf>: Now global.
4168 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
4170 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
4171 (c_parse_escape): New function.
4172 * auxv.c (fprint_target_auxv): Update.
4173 * ada-valprint.c (ada_emit_char): Add type argument.
4174 (ada_printchar): Likewise.
4175 (ada_print_scalar): Update.
4176 (printstr): Add type argument. Update calls to ada_emit_char.
4177 (ada_printstr): Add type argument.
4178 (ada_val_print_array): Update.
4179 (ada_val_print_1): Likewise.
4180 * ada-lang.c (emit_char): Add type argument.
4181 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
4183 * gdb_locale.h: Include langinfo.h.
4184 * charset.c (_initialize_charset): Set default host charset from
4185 the locale. Don't register charsets. Add target-wide-charset
4186 commands. Call find_charset_names.
4187 (struct charset, struct translation): Remove.
4188 (GDB_DEFAULT_HOST_CHARSET): Remove.
4189 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
4190 (target_wide_charset_name): New global.
4191 (show_host_charset_name): Handle "auto".
4192 (show_target_wide_charset_name): New function.
4193 (host_charset_enum, target_charset_enum): Remove.
4194 (charset_enum): New global.
4195 (all_charsets, register_charset, lookup_charset, all_translations,
4196 register_translation, lookup_translation): Remove.
4197 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
4198 (iso_8859_print_literally, iso_8859_to_control,
4199 iso_8859_family_charset): Remove.
4200 (ebcdic_print_literally, ebcdic_to_control,
4201 ebcdic_family_charset): Remove.
4202 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
4203 register_iconv_charsets): Remove.
4204 (target_wide_charset_be_name, target_wide_charset_le_name): New
4206 (identity_either_char_to_other): Remove.
4207 (set_be_le_names, validate): New functions.
4208 (backslashable, backslashed, represented): Remove.
4209 (default_c_target_char_has_backslash_escape): Remove.
4210 (default_c_parse_backslash, iconv_convert): Remove.
4211 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
4212 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
4213 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
4214 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
4215 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
4216 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
4217 (table_convert_char, table_translation, simple_table_translation):
4219 (current_host_charset, current_target_charset,
4220 c_target_char_has_backslash_escape_func,
4221 c_target_char_has_backslash_escape_baton): Remove.
4222 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
4223 (host_char_to_target_func, host_char_to_target_baton): Remove.
4224 (target_char_to_host_func, target_char_to_host_baton): Remove.
4225 (cached_iconv_host_to_target, cached_iconv_target_to_host):
4227 (lookup_charset_or_error, check_valid_host_charset): Remove.
4228 (set_host_and_target_charsets): Remove.
4229 (set_host_charset, set_target_charset): Remove.
4230 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
4231 (set_target_wide_charset_sfunc): New function.
4232 (show_charset): Print target wide character set.
4233 (host_charset, target_charset): Rewrite.
4234 (target_wide_charset): New function.
4235 (c_target_char_has_backslash_escape): Remove.
4236 (c_parse_backslash): Remove.
4237 (host_letter_to_control_character): New function.
4238 (host_char_print_literally): Remove.
4239 (host_hex_value): New function.
4240 (target_char_to_control_char): Remove.
4241 (cleanup_iconv): New function.
4242 (convert_between_encodings): New function.
4243 (target_char_to_host): Remove.
4244 (struct wchar_iterator): Define.
4245 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
4246 wchar_push_back): New functions.
4247 (do_cleanup_iterator): New function.
4248 (char_ptr): New typedef.
4249 (charsets): New global.
4250 (add_one, find_charset_names): New functions.
4251 (default_charset_names): New global.
4252 (auto_host_charset_name): Likewise.
4253 * aclocal.m4, config.in, configure: Rebuild.
4254 * configure.ac: Call AM_LANGINFO_CODESET.
4255 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
4256 (AM_ICONV): Invoke earlier.
4257 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
4258 LIBICONV_LIBDIR. Check for libiconv in build tree.
4259 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
4260 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
4261 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
4262 * gdb_obstack.h (obstack_grow_wstr): New define.
4263 * gdb_wchar.h: New file.
4264 * defs.h: Include it.
4266 2009-03-20 Tom Tromey <tromey@redhat.com>
4267 Jan Kratochvil <jan.kratochvil@redhat.com>
4269 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
4270 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
4272 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
4274 * ada-typeprint.c (print_array_type): Do the NULL check
4277 2009-03-19 Tom Tromey <tromey@redhat.com>
4279 * utils.c (do_obstack_free): New function.
4280 (make_cleanup_obstack_free): Likewise.
4281 * defs.h (make_cleanup_obstack_free): Declare.
4283 2009-03-18 Doug Evans <dje@google.com>
4285 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
4286 int, not a long long.
4287 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
4289 * expprint.c (dump_raw_expression): Print note if non-NULL.
4291 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
4294 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
4296 * Makefile.in: Update license to GPLv3.
4297 * ada-exp.y: Update license to GPLv3.
4298 * ada-lex.l: Update license to GPLv3.
4299 * c-exp.y: Update license to GPLv3.
4300 * cp-name-parser.y: Update license to GPLv3.
4301 * darwin-nat-info.c: Update license to GPLv3.
4302 * f-exp.y: Update license to GPLv3.
4303 * gdb_thread_db.h: Update license to GPLv3.
4304 * hppanbsd-nat.c: Update license to GPLv3.
4305 * hppanbsd-tdep.c: Update license to GPLv3.
4306 * hppaobsd-tdep.c: Update license to GPLv3.
4307 * jv-exp.y: Update license to GPLv3.
4308 * m2-exp.y: Update license to GPLv3.
4309 * objc-exp.y: Update license to GPLv3.
4310 * p-exp.y: Update license to GPLv3.
4311 * reply_mig_hack.awk: Update license to GPLv3.
4312 * reverse.c: Update license to GPLv3.
4313 * xtensa-xtregs.c: Update license to GPLv3.
4315 2009-03-18 Pedro Alves <pedro@codesourcery.com>
4317 * remote.c (remote_close): Don't call generic_mourn_inferior.
4318 (remote_mourn_1): Call generic_mourn_inferior after closing the
4321 2009-03-18 Pedro Alves <pedro@codesourcery.com>
4323 * remote.c (remote_start_remote): Add missing call to
4324 init_wait_for_inferior in non-stop mode.
4326 2009-03-18 Pedro Alves <pedro@codesourcery.com>
4328 * breakpoint.c (bpstat_should_step): Only consider software
4329 watchpoints that have a location.
4331 2009-03-17 Joel Brobecker <brobecker@adacore.com>
4333 Add a target_ops parameter to the to_kill method in struct target_ops.
4335 * target.h (struct target_ops): Add a "target_ops *" parameter to
4337 (target_kill): Remove macro. Add declaration.
4338 * target.c (debug_to_kill): Delete, no longer necessary.
4339 (target_kill): New function.
4340 (update_current_target): Stop inheriting the to_kill method.
4341 Do not de_fault it to no_process either.
4342 (setup_target_debug): Do not set current_target.to_kill.
4343 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
4344 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
4345 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
4348 2009-03-17 Doug Evans <dje@google.com>
4350 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
4351 glibc 2.3.2 and earlier.
4353 2009-03-17 Joel Brobecker <brobecker@adacore.com>
4355 * frame.c (get_prev_frame_1): Do not perform the inner_frame
4356 sanity check if this_frame is not NORMAL.
4357 (frame_id_inner): Update the description of this function.
4359 2009-03-17 Hui Zhu <teawater@gmail.com>
4361 * stack.c: Change the introduce of "disassemble-next-line".
4363 2009-03-17 Pedro Alves <pedro@codesourcery.com>
4365 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
4368 2009-03-17 Hui Zhu <teawater@gmail.com>
4370 * stack.c: Include valprint.h.
4371 (disassemble_next_line): New enum.
4372 (show_disassemble_next_line): New function. Show the current
4373 value of disassemble-next-line.
4374 (gdb_disassembly_stub_args): New struct for argument passing
4375 between function do_gdb_disassembly and function
4376 gdb_disassembly_stub.
4377 (gdb_disassembly_stub): New function. Helper for
4379 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
4380 the exception from the gdb_disassembly because it will be
4381 broken by filter sometime.
4382 (print_frame_info): If disassemble-next-line is set to auto
4383 or on and doesn't have the line debug messages for $pc,
4384 output the next instruction.
4385 If disassemble-next-line is set to on and there is line debug
4386 messages, output assembly codes for next line.
4387 (_initialize_stack): Make the "set disassemble-next-line"
4388 command an auto-boolean command. Change its class to
4389 class_stack. Place it in the top level set list. Extend help
4390 to describe the auto mode.
4392 2009-03-17 Pedro Alves <pedro@codesourcery.com>
4394 * infrun.c (normal_stop): Don't overwrite old_chain.
4396 2009-03-16 Joel Brobecker <brobecker@adacore.com>
4398 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
4399 which is undefined, by call to regcache_invalidate, which should
4400 do what the original author wanted to do.
4402 2009-03-16 Joel Brobecker <brobecker@adacore.com>
4404 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
4405 (mips_create_inferior): Likewise.
4407 2009-03-16 Joel Brobecker <brobecker@adacore.com>
4409 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
4411 2009-03-16 Joel Brobecker <brobecker@adacore.com>
4413 * darwin-nat.c (darwin_resume): Fix a compiler warning when
4414 building on x86_64-darwin.
4416 2009-03-16 Tristan Gingold <gingold@adacore.com>
4418 * configure.tgt: Add handling for x86_64-darwin.
4420 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4422 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
4424 2009-03-15 Joel Brobecker <brobecker@adacore.com>
4426 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
4427 Use the ops parameter to get to the target beneath, rather than
4428 using the current_target global. Using the current_target global
4429 was an unintended accident.
4431 2009-03-15 Joel Brobecker <brobecker@adacore.com>
4433 Fix an error happening while loading symbols from a core file
4436 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
4437 to detect whether we're debugging a core file or not.
4439 2009-03-15 Joel Brobecker <brobecker@adacore.com>
4441 Modernize the aix-thread later by getting rid of the base_target
4442 global. This brings back to life the AIX port which was otherwise
4443 crashing all the time.
4445 * aix-thread.c (base_target): Delete.
4446 (pd_enable): Do not set base_target.
4447 (aix_thread_attach): Use find_target_beneath instead of base_target.
4448 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
4449 (aix_thread_fetch_registers, aix_thread_store_registers),
4450 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
4451 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
4452 (aix_thread_kill): Delete. Does not seem necessary.
4453 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
4455 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
4457 * stack.c (return_command <retval_exp>): New variables retval_expr
4458 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
4459 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
4460 if RETURN_TYPE is NULL.
4462 2009-03-14 Pedro Alves <pedro@codesourcery.com>
4464 * remote.c (PACKET_qAttached): New.
4465 (remote_query_attached): New.
4466 (remote_add_inferior): Add new `attached' argument. Handle it.
4467 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
4468 -1 to remote_add_inferior in new parameter.
4469 (extended_remote_attach_1): Adjust to pass 1 to
4470 remote_add_inferior in the new parameter.
4471 (extended_remote_create_inferior_1): Adjust to pass 0 to
4472 remote_add_inferior in the new parameter.
4473 (_initialize_remote): Add "set/show remote query-attached-packet"
4476 2009-03-13 Tom Tromey <tromey@redhat.com>
4478 * symtab.c (lookup_symbol_in_language): Use a cleanup.
4480 2009-03-13 Doug Evans <dje@google.com>
4482 * exceptions.h: Clean up some comments on catch_exceptions usage.
4483 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
4486 2009-02-17 Joel Brobecker <brobecker@adacore.com>
4488 The following patch helps getting rid of a warning inside solib-som.c.
4490 * source.c (source_full_path_of): Constify parameter filename.
4491 * defs.h (source_full_path_of): Update declaration accordingly.
4493 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4495 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
4496 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
4497 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
4499 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4501 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
4502 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
4504 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4506 * ada-tasks.c (ada_task_is_alive): Move up and make static.
4507 * ada-lang.h (ada_task_is_alive): Remove declaration.
4509 2009-03-12 Jerome Guitton <guitton@adacore.com>
4511 * ada-lang.c (ada_delta): Change the type of numerators and
4512 denominators to DOUBLEST, as they may not fit into a long.
4513 (scaling_factor): Ditto.
4515 2009-03-12 Jerome Guitton <guitton@adacore.com>
4517 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
4519 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4521 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
4522 types, if we are unable to determine the actual symbol type
4523 from its tag, then use the static approximation instead.
4525 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4527 Fix crash printing packed record with packed array.
4529 * ada-lang.c (ada_modulus_from_name): New function.
4530 (ada_modulus): In the case where the type length is bigger than
4531 the size of the type used to hold the bounds, try determining
4532 the modulus from the type name.
4533 (ada_value_primitive_packed_val): Fix bug in the computation of
4534 ntarg causing an out-of-buffer invalid access.
4536 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4538 Fix segfault when printing short_integer'last.
4540 * ada-lang.c (ada_find_any_type): Search in the primitive types
4541 if a symbol could not be found.
4543 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4545 * ada-tasks.c (task_states,long_task_states): Add new states
4546 Activating and Acceptor_Delay_Sleep. Update the description
4547 of state Acceptor_Sleep.
4549 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
4551 Fix a build failure on Darwin following some changes in
4552 the profile of some target_ops methods.
4554 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
4556 (darwin_stop_inferior, darwin_detach): Likewise.
4558 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
4560 Include token in ^running notification for CLI commands.
4562 * mi/mi-main.c (mi_execute_command): Set current_token here.
4563 (mi_cmd_execute): Do not set current_token here.
4565 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
4569 * mi/mi-main.c (mi_print_timing_maybe): New.
4570 (captured_mi_execute_command): Simplify. Output timings to
4572 (mi_execute_async_cli_command): Do not print timings.
4573 * mi/mi-main.h (mi_print_timing_maybe): Declare.
4574 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
4576 2009-03-12 Jerome Guitton <guitton@adacore.com>
4578 * xcoffread.c (process_linenos): Check if the line in the
4579 include table refers to the main source file and, if so,
4580 add them to the main subfile.
4582 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4584 Fix a build failure on AIX introduced after a change in the profile
4585 of some of the "methods" in the target_ops structure.
4586 * aix-thread.c: Add missing target_ops parameter throughout.
4588 Implement Ada task switching on AIX.
4589 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
4590 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
4592 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
4594 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
4595 value_mark and value_free_to_mark.
4596 * objfiles.c (free_objfile): Call objfile_free_data before
4599 2009-03-10 Hui Zhu <teawater@gmail.com>
4601 * disasm.c (gdb_disassembly): Remove unused argument
4603 * disasm.h (gdb_disassembly): Ditto.
4604 * cli/cli-cmds.c (print_disassembly): Ditto.
4605 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
4607 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
4609 * solib.c (solib_contains_address_p): New function.
4610 (solib_name_from_address): Use it.
4611 * printcmd.c (display_uses_solib_p): Use it.
4612 * solib.h (solib_contains_address_p): Declare it.
4614 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
4616 * varobj.c (free_variable): Call value_free.
4618 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
4621 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
4622 Move the variable `macinfo_type' out of the loop. Create a new
4623 processing pass before the current one to pre-create `current_file'.
4624 New complaint on misplaced zero/non-zero definitions/includes.
4625 Skip first DW_MACINFO_start_file with `at_commandline' set.
4627 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
4629 * solib.c (reload_shared_libraries): Give
4630 inferior a chance to reset solib breakpoint.
4633 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
4635 * windows-nat.c (dr): Redefine to use largest possible integer which
4637 (cygwin_set_dr): Avoid coercion.
4639 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
4641 * windows-nat.c (windows_create_inferior): Implement --tty handling on
4644 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
4646 Rename solib_address to solib_name_from_address.
4647 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
4648 (disable_breakpoints_in_unloaded_shlib): Update.
4649 * printcmd.c (display_uses_solib_p): Likewise.
4650 * stack.c (print_frame): Likewise.
4654 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
4656 * printcmd.c (do_one_display): Reparse exp_string.
4657 (display_uses_solib_p): New function.
4658 (clear_dangling_display_expressions): New function.
4659 (_initialize_printcmd): Add observer.
4660 * solib.c (no_shared_libraries): Swap order of calls to
4661 clear_solib and objfile_purge_solibs.
4663 2009-03-05 Joel Brobecker <brobecker@adacore.com>
4665 Implement the target-specific part of Ada tasking support
4668 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
4669 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
4671 2009-03-05 Joel Brobecker <brobecker@adacore.com>
4673 Get rid of the global "base_target" and use "find_target_beneath"
4674 to find the underlying target.
4675 * dec-thread.c (base_target): Delete.
4676 (enable_dec_thread): Remove assignement to base_target.
4677 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
4678 (dec_thread_fetch_registers, dec_thread_store_registers)
4679 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
4680 Update the function profile if necessary.
4681 Use find_target_beneath to call the same method but from
4682 the underlying target, removing the need for "base_target".
4684 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
4685 Fix a copy/paste error in a few debug traces...
4687 * solib-osf.c (init_so): Use a simpler method for computing
4688 the size of lm_info structure. This also gets rid of warning
4689 emitted by the compiler.
4691 2009-03-05 Pedro Alves <pedro@codesourcery.com>
4693 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
4694 duplicates of permanent breakpoints.
4696 2009-03-04 Pedro Alves <pedro@codesourcery.com>
4698 * inferior.h (notice_new_inferior): Declare.
4699 * infcmd.c (notice_new_inferior): New.
4700 * remote.c (remote_add_inferior, remote_add_thread): New.
4701 (notice_new_inferiors): Rename to...
4702 (remote_notice_new_inferior): ... this. Add RUNNING argument.
4703 Use remote_add_thread instead of add_thread, passing it the
4704 RUNNING argument. Add an inferior with remote_add_inferior. If
4705 we just learned about an inferior, call notice_new_inferior.
4706 (record_currthread): Adjust.
4707 (remote_threads_info): Adjust to use remote_notice_new_inferior.
4708 (remote_start_remote, extended_remote_attach_1): Use
4709 remote_add_inferior.
4710 (process_stop_reply): Adjust. Call remote_notice_new_inferior
4711 after handling expedited registers and watchpoint state.
4712 (extended_remote_create_inferior_1): Use remote_add_inferior.
4714 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
4716 * infcmd.c (registers_info): Remove register number case.
4718 2009-03-03 Pedro Alves <pedro@codesourcery.com>
4720 * top.c (quit_target): Check for target_has_execution before
4721 killing or detaching from inferiors.
4723 2009-03-02 Joel Brobecker <brobecker@adacore.com>
4725 Remove some unused routines.
4727 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
4729 * ada-lang.c (ada_task_list_iterator_ftype)
4730 (iterate_over_live_ada_tasks): Delete.
4731 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
4734 2009-03-01 Doug Evans <dje@google.com>
4736 * symtab.c: Remove trailing whitespace throughout the file.
4737 (expand_line_sal): Fix some typos and whitespace.
4739 * Makefile.in (clean): rm -f $(DEPDIR)/*.
4741 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
4742 (init.c): signals/ -> common/.
4743 (signals.o): Update.
4744 * target.h (target_signal_to_string,target_signal_to_string)
4745 (target_signal_from_name,target_signal_to_host_p)
4746 (target_signal_from_host,target_signal_to_host): Move to ...
4747 * common/gdb_signals.h: ... here. New file.
4748 * common/signals.c: Moved here from signals/signals.c.
4749 #include gdb_signals.h, remove #include of target.h in gdb case.
4750 (target_signal_from_command,default_target_signal_to_host)
4751 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
4753 Include thread ID in target_wait debugging output.
4754 * infrun.c (print_target_wait_results): New function.
4755 (wait_for_inferior,fetch_inferior_event): Call it.
4757 2009-02-27 Pedro Alves <pedro@codesourcery.com>
4759 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
4760 with a ptid_t field.
4761 * linux-thread-db.c (thread_get_info_callback): Build the ptid
4762 using the pid stored in proc_handle.ptid.
4763 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
4764 (check_for_thread_db, thread_db_detach, check_event)
4765 (thread_db_mourn_inferior, find_new_threads_callback)
4766 (thread_db_find_new_threads_1): Adjust.
4767 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
4768 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
4770 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
4772 * valprint.c (read_string): Rework clean-up logic. Use
4773 free_current_contents to clean-up buffer.
4775 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
4777 * MAINTAINERS: Update e-mail address.
4779 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
4781 * python/python-utils.c (python_string_to_unicode): Always return
4783 (python_string_to_target_string): Decrement transient python
4785 (python_string_to_host_string): Likewise.
4787 2007-02-26 Pedro Alves <pedro@codesourcery.com>
4789 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
4790 call to super_fetch_registers.
4791 (mips64_linux_store_registers): Pass `ops' to call to
4792 super_store_registers.
4794 2009-02-25 Doug Evans <dje@google.com>
4796 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
4799 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
4800 disabled_shlib_breaks, unused.
4802 * printcmd.c (build_address_symbolic): Fix comment.
4804 2009-02-25 Hui Zhu <teawater@gmail.com>
4806 * cli/cli-script.c (define_command): Add _() to query.
4807 * gnu-nat.c (inf_validate_task_sc): Ditto.
4808 * infcmd.c (kill_if_already_running): Ditto.
4809 (jump_command): Ditto.
4810 (attach_command): Ditto.
4811 * inflow.c (kill_command): Ditto.
4812 * infrun.c (handle_command): Ditto.
4813 * maint.c (maintenance_dump_me): Ditto.
4814 * memattr.c (mem_delete_command): Ditto.
4815 * monitor.c (monitor_interrupt_query): Ditto.
4816 * nto-procfs.c (interrupt_query): Ditto.
4817 * printcmd.c (undisplay_command): Ditto.
4818 * remote-mips.c (mips_kill): Ditto.
4819 * remote.c (interrupt_query): Ditto.
4820 * solib-irix.c (irix_open_symbol_file_object): Ditto.
4821 * solib-osf.c (osf_open_symbol_file_object): Ditto.
4822 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
4823 * solib-som.c (som_open_symbol_file_object): Ditto.
4824 * solib-svr4.c (open_symbol_file_object): Ditto.
4825 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
4826 * target.c (kill_or_be_killed): Ditto.
4827 * tracepoint.c (delete_trace_command): Ditto.
4828 * top.c (quit_confirm): Add _() to s that will be used
4831 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
4833 Fix windows-nat.c compilation failure.
4835 * windows-nat.c (windows_thread_alive): Fix forward declaration.
4836 (get_windows_debug_event): Add ops parameter to call to windows_resume.
4838 2009-02-23 Pedro Alves <pedro@codesourcery.com>
4840 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
4842 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
4844 * symtab.c (find_line_symtab): Initialize exact to avoid
4847 2009-02-23 Pedro Alves <pedro@codesourcery.com>
4849 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
4850 `ops' to recursive call.
4852 2009-02-23 Pedro Alves <pedro@codesourcery.com>
4854 * corelow.c (get_core_registers): Adjust.
4855 (core_file_thread_alive): Rename to...
4856 (core_thread_alive): ... this.
4857 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
4858 (init_core_ops): Adjust.
4859 (coreops_suppress_target): Delete.
4860 (_initialize_corelow): Unconditionally add core_ops.
4861 * procfs.c: Include "inf-child.h".
4862 (procfs_ops): Delete.
4863 (init_procfs_ops): Delete. Reimplement as...
4864 (procfs_target): ... this, inheriting from inf-child.
4865 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
4866 (procfs_prepare_to_store): Delete.
4867 (procfs_store_registers, procfs_resume): Adjust.
4868 (procfs_open): Delete.
4869 (procfs_suppress_run): Delete.
4870 (procfs_can_run): Delete.
4871 (procfs_mourn_inferior): Adjust.
4872 (procfs_init_inferior): Add target_ops parameter. Adjust.
4873 (procfs_create_inferior): Don't pass procfs_init_inferior to
4874 fork_inferior. Instead call it after fork_inferior returns.
4875 (procfs_find_new_threads): Adjust.
4876 (_initialize_procfs): Adjust to use procfs_target instead of
4878 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
4879 (lwp_to_thread): Use target_thread_alive.
4880 (sol_thread_open): Delete.
4881 (sol_thread_attach): Delete.
4882 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
4883 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
4884 to use find_target_beneath.
4885 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
4886 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
4887 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
4888 (check_for_thread_db): New.
4889 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
4890 (sol_thread_new_objfile): Call check_for_thread_db.
4891 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
4892 (sol_thread_can_run): Delete.
4893 (sol_thread_alive): Adjust to use find_target_beneath.
4894 (sol_thread_stop): Delete.
4895 (rw_common): Use target_write_memory or target_read_memory.
4896 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
4897 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
4898 (solaris_pid_to_str): Remove check for libthread_db initialization
4900 (sol_find_new_threads): Remove check for libthread_db
4901 initialization failing, or for an invalid inferior_ptid. Adjust
4902 to use find_target_beneath.
4903 (sol_core_open, sol_core_close, sol_core_detach,
4904 sol_core_files_info, sol_find_memory_regions,
4905 sol_make_note_section, ignore): Delete.
4906 (init_sol_thread_ops): Make it a thread_stratum target. Remove
4907 unneeded callback settings.
4908 (init_sol_core_ops): Delete.
4909 (_initialize_sol_thread): No longer call init_sol_core_ops, set
4910 procfs_suppress_run, or hack with core_ops.
4912 * target.h (struct target_ops): Add a target_ops * parameter to
4913 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
4914 and to_find_new_threads.
4915 (target_fetch_registers, target_store_registers)
4916 (target_thread_alive, target_find_new_threads): Redeclare as
4919 * target.c (update_current_target): Do not inherit or de_fault
4920 to_resume, to_fetch_registers, to_store_registers,
4921 to_thread_alive, to_find_new_threads.
4922 (target_resume): Adjust.
4923 (target_thread_alive, target_find_new_threads): New.
4924 (debug_to_resume, debug_to_fetch_registers): Delete.
4925 (target_fetch_registers): New.
4926 (debug_to_store_registers): Delete.
4927 (target_store_registers): New.
4928 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
4929 (setup_target_debug): Adjust.
4931 * gdbcore.h (core_ops): Delete declaration.
4933 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
4934 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
4935 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
4936 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
4937 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
4938 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
4939 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
4940 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
4941 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
4942 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
4943 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
4944 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
4945 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
4946 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
4948 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
4949 * gdbarch.h, gdbarch.c: Regenerate.
4951 * sol2-tdep.c: Include "inferior.h".
4952 (sol2_core_pid_to_str): New.
4953 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
4955 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
4956 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
4957 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
4958 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
4960 2009-02-22 Doug Evans <dje@google.com>
4962 * exec.c (exec_file_attach): Fix comment.
4964 2009-02-22 Pedro Alves <pedro@codesourcery.com>
4966 Silence a few -Wmissing-prototypes warnings.
4969 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
4971 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
4972 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
4973 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
4974 (_initialize_amd64nbsd_tdep): ... this.
4975 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
4976 (_initialize_arm_linux_tdep): Declare.
4977 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
4978 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
4979 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
4980 * avr-tdep.c (avr_return_value): Make it static.
4981 (avr_frame_unwind_cache): Ditto.
4982 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
4983 (bsd_uthread_solib_loaded): Ditto.
4984 (bsd_uthread_solib_unloaded): Ditto.
4985 (bsd_uthread_target): Ditto.
4986 (_initialize_bsd_uthread): Declare.
4987 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
4988 (cris_frame_unwind_cache): Ditto.
4989 * frv-tdep.c (frv_return_value): Ditto.
4990 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
4991 (h8300h_use_struct_convention): Ditto.
4992 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
4994 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
4996 * hppabsd-tdep.c: Include hppabsd-tdep.h.
4997 (hppabsd_find_global_pointer): Make it static.
4998 * hppabsd-tdep.h: New.
4999 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
5000 (hppabsd_init_abi): Remove declaration.
5001 (_initialize_hppabsd_tdep): Remove declaration.
5002 (_initialize_hppanbsd_tdep): Declare.
5003 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
5004 (hppabsd_init_abi): Delete declaration.
5005 (hppaobsd_init_abi): Make it static.
5006 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
5007 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
5008 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
5009 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
5010 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
5011 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
5012 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
5013 (_initialize_m32c_tdep): Declare.
5014 * m32r-rom.c (_initialize_m32r_rom): Declare.
5015 * m32r-tdep.c (m32r_skip_prologue): Make it static.
5016 (m32r_return_value): Ditto.
5017 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
5018 (m68hc11_return_value): Ditto.
5019 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
5020 * m88k-tdep.c (m88k_frame_cache): Make it static.
5021 * mep-tdep.c (mep_gdb_print_insn): Ditto.
5022 (mep_return_value): Ditto.
5023 (_initialize_mep_tdep): Declare.
5024 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
5025 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
5026 (mips_linux_syscall_next_pc): Ditto.
5027 (_initialize_mips_linux_tdep): Declare.
5028 * mips-tdep.c (mips_single_step_through_delay): Make it static.
5029 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
5030 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
5031 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
5032 * mt-tdep.c (_initialize_mt_tdep): Declare.
5033 * nbsd-tdep.c: Include nbsd-tdep.h.
5034 * nto-tdep.c (find_load_phdr): Make it static.
5035 (_initialize_nto_tdep): Declare.
5036 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
5038 (_initialize_ppc_linux_tdep): Declare.
5039 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
5040 (m32r_insert_watchpoint, m32r_remove_watchpoint)
5041 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
5043 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
5044 * rs6000-nat.c: Include xcoffread.h.
5045 (find_toc_address): Don't extern declare get_toc_offset. Adjust
5046 to call xcoff_get_to_offset.
5047 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
5048 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
5049 (rs6000_skip_trampoline_code): Make static.
5050 * s390-tdep.c (s390_regset_from_core_section): Ditto.
5051 * sh-tdep.c (sh_register_reggroup_p): Ditto.
5052 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
5053 (_initialize_shnbsd_tdep): Declare.
5054 * solib-frv.c (displacement_from_map): Make static.
5055 (_initialize_frv_solib): Declare.
5056 * solib-irix.c (fetch_lm_info): Make static.
5057 (_initialize_irix_solib): Declare.
5058 * solib-som.c: Include solib-som.h.
5059 (som_solib_select): Line break.
5060 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
5061 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
5062 (_initialize_sparcnbsd_tdep): ... this.
5063 * spu-tdep.c (spu_software_single_step): Make it static.
5064 (_initialize_spu_tdep): Declare.
5065 * vax-tdep.c (vax_frame_cache): Make it static.
5066 * xcoffread.c: Include xcoffread.h.
5067 (get_toc_offset): Rename to ...
5068 (xcoff_get_toc_offset): ... this.
5069 (_initialize_xcoffread): Declare.
5071 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
5072 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
5074 (_initialize_xtensa_tdep): Declare.
5076 2008-02-21 Pedro Alves <pedro@codesorcery.com>
5078 Silence a few -Wmissing-prototypes warnings.
5081 * amd64-nat.c: Include "amd64-nat.h".
5082 * fork-child.c (_initialize_fork_child): Ditto.
5083 * gcore.c (_initialize_gcore): Ditto.
5084 * inf-ptrace.c: Include "inf-ptrace.h".
5085 (inf_ptrace_store_registers): Make it static.
5086 * linux-nat.c (linux_nat_terminal_ours): Make it static.
5087 (_initialize_linux_nat): Declare before definition.
5088 * linux-tdep.c: Include "linux-tdep.h".
5089 * linux-thread-db.c (_initialize_thread_db): Declare before
5091 * proc-service.c (_initialize_proc_service): Ditto.
5092 * remote.c (remote_send_printf): Make it static.
5093 * solib.c: Include "solib.h".
5094 * symfile-mem.c (_initialize_symfile_mem): Declare before
5096 * ada-lang.c (ada_la_decode, ada_match_name)
5097 (ada_suppress_symbol_printing, ada_is_array_type)
5098 (ada_value_ptr_subscript, ada_array_length)
5099 (ada_to_static_fixed_value): Make them static.
5100 (_initialize_ada_language): Declare before definition.
5101 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
5102 (ada_task_list_changed, ada_new_objfile_observer): Make them
5104 (_initialize_tasks): Declare before definition.
5105 * addrmap.c (_initialize_addrmap): Declare before definition.
5106 * auxv.c (default_auxv_parse): Make it static.
5107 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
5109 * breakpoint.c (remove_sal): Add line break.
5110 (expand_line_sal_maybe): Make it static.
5111 * cp-name-parser.y: Include "cp-support.h".
5112 * cp-valprint.c (cp_find_class_member): Make it static.
5113 * eval.c (value_f90_subarray): Ditto.
5114 * exceptions.c (print_any_exception): Ditto.
5115 * findcmd.c (_initialize_mem_search): Declare before definition.
5116 * frame.c (frame_observer_target_changed): Make it static.
5117 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
5118 * inf-child.c: Include "inf-child.h".
5119 * inferior.h (valid_inferior_id): Rename to ...
5120 (valid_gdb_inferior_id): ... this.
5121 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
5123 * jv-lang.c (java_language_arch_info): Make it static.
5124 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
5125 * osdata.c (info_osdata_command): Make it static.
5126 * regcache.c (regcache_observer_target_changed): Make it static.
5127 * reverse.c (_initialize_reverse): Declare before definition.
5128 * stabsread.c (cleanup_undefined_types_noname)
5129 (cleanup_undefined_types_1): Make them static.
5130 * symfile.c (place_section): Make it static.
5131 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
5132 * target-descriptions.c (_initialize_target_descriptions): Declare
5134 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
5135 (find_default_is_async_p, find_default_supports_non_stop): Make
5137 (target_supports_non_stop): Add prototype.
5138 (dummy_pid_to_str): Make it static.
5139 * utils.c (_initialize_utils): Declare before definition.
5140 * ada-exp.y (_initialize_ada_exp): Declare before definition.
5141 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
5142 * target.h (struct target_ops): Add a prototype to the
5143 to_can_execute_reverse callback.
5144 * macroscope.c (_initialize_macroscope): Declare before definition.
5145 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
5146 * python/python.c (_initialize_python): Declare before definition.
5147 * tui/tui-command.c: Include "tui/tui-command.h".
5148 * tui/tui-data.c (init_content_element, init_win_info): Make them
5150 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
5151 * tui/tui-interp.c (_initialize_tui_interp): Declare before
5153 * tui/tui-layout.c: Include "tui/tui-layout.h".
5154 (_initialize_tui_layout): Declare before definition.
5155 * tui/tui-regs.c: Include "tui/tui-regs.h".
5156 (tui_display_reg_element_at_line): Make it static.
5157 (_initialize_tui_regs): Declare before definition.
5158 * tui/tui-stack.c (_initialize_tui_stack): Declare before
5160 * tui/tui-win.c: Include "tui/tui-win.h".
5161 (_initialize_tui_win): Declare before definition.
5162 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
5163 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
5164 (tui_get_cmd_list): Add a prototype.
5165 * tui/tui-windata.c: Include tui-windata.h.
5166 * tui/tui-wingeneral.c (box_win): Make it static.
5167 * cli/cli-logging.c (show_logging_command): Make it static.
5168 (_initialize_cli_logging): Declare before definition.
5169 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
5172 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
5174 Extend use of i386_use_watchpoints to all i386 native files
5175 using hardware watchpoints.
5176 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
5177 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
5178 * windows-nat.c (init_windows_ops): Ditto.
5179 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
5180 * config/i386/nm-cygwin64.h: Ditto.
5181 * config/i386/nm-fbsd.h: Ditto.
5182 * config/i386/nm-go32.h: Ditto.
5184 2009-02-19 Joel Brobecker <brobecker@adacore.com>
5186 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
5188 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
5190 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
5191 (mi_interpreter_init): Register the above.
5192 * solib.c (clear_solib): Notify solib unload.
5193 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
5194 disable breakpoints on a.out targets.
5196 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
5198 * observer.c (observer_test_first_notification_function)
5199 (observer_test_second_notification_function)
5200 (observer_test_third_notification_function): Adjust prototype.
5202 2009-02-17 Pedro Alves <pedro@codesourcery.com>
5204 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
5205 (ALL_TARGET_OBS): Add dicos-tdep.o.
5206 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
5207 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
5209 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
5211 * dicos-tdep.h, dicos-tdep.c: New.
5212 * amd64-dicos-tdep.c: New.
5213 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
5214 inferior.h. Include dicos-tdep.h.
5215 (i386_dicos_init_abi): Call dicos_init_abi.
5216 (i386_dicos_bfd_has_symbol_p): Delete.
5217 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
5219 * NEWS: Mention x86-64 DICOS target support.
5221 2009-02-16 Doug Evans <dje@google.com>
5223 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
5224 All callers updated.
5225 (amd64_get_insn_details): Handle more 3-byte opcode insns.
5226 (amd64_breakpoint_p): Delete.
5227 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
5228 don't back up pc to the start of the int3.
5229 * i386-tdep.c: #include opcode/i386.h.
5230 (i386_skip_prefixes): New function.
5231 (i386_absolute_jmp_p): Constify argument.
5232 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
5233 (i386_breakpoint_p): Delete.
5234 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
5235 When fixing up after stepping an int3, don't back up pc to the start
5238 2009-02-16 Pedro Alves <pedro@codesourcery.com>
5240 * corelow.c (core_close): Don't hardcode the core's pid.
5241 (core_open): Find core threads before calling
5242 post_create_inferior.
5243 (add_to_thread_list, get_core_register_section): Take into account
5244 systems where the regset section names encode the pid of the
5247 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
5248 * gdbarch.h, gdbarch.c: Regenerate.
5250 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
5251 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
5252 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
5253 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
5255 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
5257 Include frame information for *stopped due to CLI commands.
5259 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
5260 * infcmd.c (finish_command_continuation): Pass '1' for
5261 'print_frame' parameter to the observer.
5262 * infrun.c (normal_stop): Don't print mi-specific information
5263 here. Pass 'stop_print_frame' to the 'print_frame' parameter
5265 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
5266 If we need to print frame, and current uiout is not the MI one,
5269 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
5271 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
5272 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
5274 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
5277 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
5278 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
5280 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
5282 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
5283 for DW_ATE_signed_char and DW_ATE_unsigned_char
5284 for pascal language.
5286 2009-02-11 Jim Meyering <meyering@redhat.com>
5287 Jan Kratochvil <jan.kratochvil@redhat.com>
5289 Avoid NULL dereference.
5290 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
5291 New variable func_type.
5293 2009-02-11 Pedro Alves <pedro@codesourcery.com>
5295 * gdbarch.c: Regenerate.
5297 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
5299 * p-lang.c (is_pascal_string_type): Fix comment.
5300 Determine exact size of char elements for GPC
5302 (pascal_printstr): Handle char width of 2 or 4.
5303 * p-valprint.c (pascal_val_print): Handle char
5306 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
5308 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
5309 inside the loop. Only call addrmap_set_empty if the compilation unit
5310 had DW_AT_high_pc and DW_AT_low_pc. Update call to
5311 scan_partial_symbols.
5312 (scan_partial_symbols): Take NEED_PC argument and pass it along with
5314 (add_partial_namespace): Take NEED_PC argument and pass it through.
5315 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
5318 2009-02-07 Pedro Alves <pedro@codesourcery.com>
5320 * NEWS: Mention inspecting extra signal information, $_siginfo,
5321 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
5323 2009-02-07 Pedro Alves <pedro@codesourcery.com>
5325 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
5328 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5330 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
5331 (compat_timer_t, compat_clock_t, struct compat_timeval)
5332 (compat_sigval_t, compat_siginfo_t): New types.
5333 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
5334 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
5335 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
5336 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
5337 (amd64_linux_siginfo_fixup): New.
5338 * linux-nat.c (linux_nat_siginfo_fixup): New.
5339 (siginfo_fixup): New.
5340 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
5341 siginfo layout expected by ptrace and the siginfo layout of the
5343 (linux_nat_set_siginfo_fixup): New.
5344 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
5346 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5348 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
5349 * infrun.c (siginfo_value_read, siginfo_value_write): New.
5350 (siginfo_value_funcs): New.
5351 (siginfo_make_value): New.
5352 (_initialize_infrun): Create the $_siginfo convenience variable.
5353 * gdbtypes.h (append_composite_type_field_aligned): Declare.
5354 * gdbtypes.c (append_composite_type_field): Rename to...
5355 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
5356 argument. Handle it.
5357 (append_composite_type_field): Rewrite on top of
5358 append_composite_type_field_aligned.
5359 * value.h (internalvar_make_value): New typedef.
5360 (struct internalvar) <make_value>: New field.
5361 (create_internalvar_type_lazy): Declare.
5362 * value.c (create_internalvar): Clear make_value.
5363 (create_internalvar_type_lazy): New.
5364 (value_of_internalvar): If make_value is set use it.
5365 (preserve_values): Skip internal variables that don't have a
5367 * gdbarch.sh (get_siginfo_type): New.
5368 * gdbarch.h, gdbarch.c: Regenerate.
5370 * linux-tdep.h, linux-tdep.c: New.
5371 * amd64-linux-tdep.c: Include "linux-tdep.h".
5372 (amd64_linux_init_abi): Register linux_get_siginfo_type and
5373 linux_get_siginfo_mapper.
5374 * i386-linux-tdep.c: Include "linux-tdep.h".
5375 (i386_linux_init_abi): Register linux_get_siginfo_type and
5376 linux_get_siginfo_mapper.
5377 * arm-linux-tdep.c: Include "linux-tdep.h".
5378 (i386_linux_init_abi): Register linux_get_siginfo_type and
5379 linux_get_siginfo_mapper.
5381 * linux-nat.c (linux_xfer_siginfo): New.
5382 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
5383 * remote.c (PACKET_qXfer_siginfo_read)
5384 (PACKET_qXfer_siginfo_write): New.
5385 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
5386 "qXfer:siginfo:write" features.
5387 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
5388 (_initialize_remote): Add "set/show remote read-siginfo-object"
5389 and "set/show remote write-siginfo-object" commands.
5391 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
5392 (HFILES_NO_SRCDIR): Add linux-tdep.h.
5393 (ALLDEPFILES): Add linux-tdep.c.
5395 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
5396 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
5399 2009-02-06 Jim Blandy <jimb@codesourcery.com>
5400 Daniel Jacobowitz <dan@codesourcery.com>
5401 Vladimir Prus <vladimir@codesourcery.com>
5402 Pedro Alves <pedro@codesourcery.com>
5404 * defs.h (enum lval_type): New value: lval_computed.
5405 * value.h (struct lval_funcs): New type.
5406 (allocate_computed_value, value_computed_funcs)
5407 (value_computed_closure): New declarations.
5408 * value.c (struct value): Add a structure to the location union
5409 for computed lvalues, containing 'funcs' and 'closure' members.
5410 (allocate_computed_value, value_computed_funcs)
5411 (value_computed_closure): New functions.
5412 (value_free): For computed lvalues, call the closure's
5413 'free_closure' function before freeing the value itself.
5414 (value_copy): If we're copying an lval_computed value, call the
5415 closure's 'copy_closure' function.
5416 (set_value_component_location): If the original value is a
5417 computed lvalue, then call the closure's 'copy_closure' function.
5418 (value_of_internalvar): If an internal variable's value is a
5419 computed lvalue, make retrieving its value produce an equivalent
5421 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
5422 their read function.
5423 (value_assign): Assign to computed lvalues by calling their write
5426 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5428 * linux-nat.c (linux_nat_wait): Adjust.
5429 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
5430 * linux-nat.h (thread_db_init): Delete declaration.
5431 * linux-thread-db.c (target_beneath): Delete.
5432 (thread_db_init): Delete.
5433 (thread_db_detach): Use find_target_beneath.
5434 (thread_db_wait): Adjust interface. Use find_target_beneath.
5435 (thread_db_mourn_inferior): Use find_target_beneath.
5436 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
5437 (thread_db_async_mask): Delete.
5438 (thread_db_pid_to_str): Adjust interface. Use
5439 find_target_beneath.
5440 (thread_db_get_thread_local_address): Adjust interface. Use
5441 find_target_beneath.
5442 (init_thread_db_ops): Delete references to delete functions.
5443 * target.c (update_current_target): Don't inherit or default
5444 to_wait. Don't inherit to_pid_to_str and
5445 to_get_thread_local_address.
5446 (target_translate_tls_address): Look for a pushed target that
5447 implements to_get_thread_local_address, and use it instead of
5448 checking for target_get_thread_local_address_p.
5449 (target_wait, target_pid_to_str): Reimplement as functions.
5450 (dummy_pid_to_str): New.
5451 (init_dummy_target): Register it.
5452 (debug_to_wait): Delete.
5453 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
5454 to_get_thread_local_address accept a pointer to struct target_ops.
5455 (target_wait): Delete macro, and declare as function.
5456 (target_pid_to_str): Likewise.
5457 (target_get_thread_local_address)
5458 (target_get_thread_local_address_p): Delete.
5459 (noprocess): Add NORETURN and ATTR_NORETURN tags.
5460 * inf-ptrace.c (inf_ptrace_wait): Adjust.
5461 (inf_ptrace_pid_to_str): New.
5462 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
5463 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
5464 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
5465 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
5467 * corelow.c (core_pid_to_str): Adjust.
5468 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
5469 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
5470 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
5471 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
5472 * hpux-thread.c (hpux_thread_wait): Adjust.
5473 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
5474 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
5475 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
5476 * procfs.c (procfs_pid_to_str): Adjust.
5477 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
5478 * remote-mips.c (mips_wait): Adjust.
5479 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
5480 * remote.c (remote_wait, remote_pid_to_str)
5481 (remote_get_thread_local_address): Adjust.
5482 * rs6000-nat.c (rs6000_wait): Adjust.
5483 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
5484 (sol_thread_wait, solaris_pid_to_str): Adjust.
5485 * spu-linux-nat.c (spu_child_wait): Adjust.
5486 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
5488 2009-02-06 Tom Tromey <tromey@redhat.com>
5490 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
5491 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
5492 (python-cmd.o): New target.
5493 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
5494 completer prototype.
5495 (add_cmd): Initialize destroyer member of cmd_list_element. Use
5496 make_symbol_completion_list_fn as completer.
5497 (delete_cmd): Call destroyer if one is set.
5498 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
5499 completer member. Add destroyer member.
5500 (set_cmd_completer): Add self parameter to
5501 completer prototype.
5502 * command.h (set_cmd_completer): Add cmd parameter to
5503 completer prototype.
5504 * completer.c (noop_completer, filename_completer,
5505 location_completer, expression_completer, command_completer): Adapt
5506 to new completer prototype.
5507 (complete_line_internal): Pass new parameter to completer function.
5508 * completer.h (noop_completer, filename_completer,
5509 location_completer, expression_completer, command_completer): Adapt
5510 prototypes to new completer prototype.
5511 * interps.c (interpreter_completer): Adapt to new completer
5513 * python/python-cmd.c: New file.
5514 * python/python-internal.h (gdbpy_initialize_commands): Add
5516 (gdbpy_doc_cst): Add forward declaration.
5517 * python/python.c (gdbpy_doc_cst): Declare.
5518 (_initialize_python): Call gdbpy_initialize_commands. Initialize
5520 * symtab.c (make_symbol_completion_list_fn): New function.
5521 * symtab.h (make_symbol_completion_list_fn): Add prototype.
5523 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5525 * target.c (target_get_osdata): Check for equal or higher than
5526 process_stratum, not dummy_stratum.
5528 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5530 * remote.c (extended_remote_can_run): Delete.
5531 (init_remote_ops): Don't register it.
5532 * target.c (target_get_osdata): Don't check for target_can_run.
5533 Instead any target that has already been pushed, otherwise
5534 fallback to the default run target.
5536 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5538 * target.c (target_create_inferior, target_detach)
5539 (target_mourn_inferior, target_attach, target_close): Do target
5541 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
5542 (debug_to_mourn_inferior, debug_to_close): Delete.
5543 (setup_target_debug): Adjust.
5545 2009-02-05 Pedro Alves <pedro@codesourcery.com>
5547 * target.h (target_stopped_data_address_p): Delete declaration,
5548 and don't define as macro.
5549 * target.c (target_stopped_data_address_p): Delete.
5551 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
5552 Tom Tromey <tromey@redhat.com>
5554 * python/python-utils.c (target_string_to_unicode): New function.
5555 * python/python-internal.h (target_string_to_unicode): New prototype.
5556 * python/python-value.c (valpy_string): New function.
5557 (value_object_methods): Add `string' entry.
5559 2009-02-05 Pedro Alves <pedro@codesourcery.com>
5561 * target.h (target_tid_to_str): Delete.
5562 * thread.c (print_thread_info, thread_apply_all_command)
5563 (thread_apply_command, thread_command, do_captured_thread_select):
5564 Use target_pid_to_str instead of target_tid_to_str.
5565 * linux-fork.c (delete_fork_command): Likewise.
5567 2009-02-05 Pedro Alves <pedro@codesourcery.com>
5569 * frame.c (has_stack_frames): Make public.
5570 (get_prev_frame): Don't allow a NULL this_frame anymore.
5571 * frame.h (has_stack_frames): Declare.
5572 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
5573 to get_prev_frame, instead start at get_current_frame.
5574 (varobj_create): Check has_stack_frames before getting any frame;
5575 eliminate one usage of deprecated_safe_get_selected_frame.
5577 2009-02-05 Tom Tromey <tromey@redhat.com>
5578 Thiago Jung Bauermann <bauerman@br.ibm.com>
5580 * python/python.c (GdbMethods): Move to bottom of file.
5581 (get_parameter, execute_gdb_command, gdbpy_write,
5582 gdbpy_flush): Remove forward declarations.
5583 (eval_python_from_control_command): Fix error checking of function
5584 PyRun_SimpleString. Fix error string.
5585 (python_command): Likewise.
5586 (execute_gdb_command): Added from_tty argument.
5588 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
5590 * language.h (language_dfn): Add la_get_string member.
5591 (LA_GET_STRING): New macro.
5592 (default_get_string): New prototype.
5593 * language.c (default_get_string): New function.
5594 (unknown_language_defn, auto_language_defn, local_language_defn): Use
5595 default_get_string for la_get_string.
5596 * c-lang.c (c_get_string): New function.
5597 (c_language_defn, cplus_language_defn, asm_language_defn): Use
5598 c_get_string for la_get_string.
5599 (minimal_language_defn): Likewise
5600 * ada-lang.c (ada_language_defn): Likewise.
5601 * f-lang.c (f_language_defn): Use default_get_string for
5603 * jv-lang.c (java_language_defn): Likewise.
5604 * m2-lang.c (m2_language_defn): Likewise.
5605 * objc-lang.c (objc_language_defn): Likewise.
5606 * p-lang.c (p_language_defn): Likewise.
5607 * scm-lang.c (scm_language_defn): Likewise.
5608 * typeprint.c (type_to_string): New function.
5609 * value.h (type_to_string): New prototype.
5610 * valprint.c (val_print_string): Factor out code for reading string
5611 from the inferior into its own function. Put 2 spaces after period
5613 (read_string): New function.
5614 * valprint.h (read_string): New prototype.
5616 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
5617 Tom Tromey <tromey@redhat.com>
5619 PR breakpoints/8079:
5620 * breakpoint.c (print_one_breakpoint): Use exp_string field
5621 to display expression of watchpoints.
5622 (mention): Likewise.
5623 (watch_command_1): Remove trailing whitespace from expression.
5624 * printcmd.c (struct display) <exp_string>: New field.
5625 (display_command): Set exp_string.
5626 (free_display): Free exp_string.
5627 (clear_displays): Use free_display.
5628 (do_one_display): Print exp_string.
5629 (display_info): Likewise.
5631 2009-02-04 Tom Tromey <tromey@redhat.com>
5632 Thiago Jung Bauermann <bauerman@br.ibm.com>
5633 Phil Muldoon <pmuldoon@redhat.com>
5635 * python/python-internal.h (gdbpy_get_value_from_history): Rename
5636 prototype to gdbpy_history.
5637 (gdbpy_is_string): Declare.
5638 (python_string_to_host_string): Declare.
5639 * python/python-utils.c (gdbpy_is_string): New function.
5640 (unicode_to_encoded_string): New function.
5641 (unicode_to_target_string): Use it.
5642 (python_string_to_host_string): New function.
5643 * python/python-value.c (valpy_address): New function.
5644 (convert_value_from_python): Use gdbpy_is_string. Change to throw
5645 Python exception instead of a GDB exception on error. Properly check
5647 (valpy_getitem): Convert field name to host string. Handle array
5648 accesses. Adapt to new behaviour of convert_value_from_python.
5649 (valpy_new): Adapt to new behaviour of convert_value_from_python.
5650 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
5651 VALPY_BITXOR, VALPY_BITOR>: New constants.
5652 (valpy_binop): Update. Adapt to new behaviour of
5653 convert_value_from_python.
5654 (valpy_invert): New function.
5655 (valpy_lsh): Likewise.
5656 (valpy_rsh): Likewise.
5657 (valpy_and): Likewise.
5658 (valpy_or): Likewise.
5659 (valpy_xor): Likewise.
5660 (valpy_richcompare): Call convert_value_from_python instead of doing
5662 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
5663 (gdbpy_get_value_from_history): Rename
5664 function to gdbpy_history.
5665 (gdbpy_initialize_values): Don't set tp_new.
5666 (value_object_type): Add valpy_new.
5667 (value_object_methods): Add `address' entry.
5668 (value_object_as_number): Update for new methods.
5669 * python/python.c (GdbMethods): Rename entry from
5670 `get_value_from_history' to `history'.
5672 2009-02-04 Jerome Guitton <guitton@adacore.com>
5674 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
5675 of type to guard against a crash.
5677 2009-02-04 Jerome Guitton <guitton@adacore.com>
5679 * value.c (value_from_contents_and_address): Always return
5680 a lval_memory value, even if address is null.
5682 2009-02-04 Tristan Gingold <gingold@adacore.com>
5684 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
5685 (amd64_darwin_sigcontext_addr): Ditto.
5686 (darwin_dwarf_signal_frame_p): Ditto.
5687 (i386_darwin_init_abi): Handle signal frames, use the const for
5689 (x86_darwin_init_abi_64): Ditto.
5691 2009-02-04 Tristan Gingold <gingold@adacore.com>
5693 * i386-tdep.c (i386_sigtramp_p): Make it public.
5694 * i386-tdep.h (i386_sigtramp_p): Declare.
5696 2009-02-04 Tristan Gingold <gingold@adacore.com>
5698 * machoread.c (macho_symfile_read): Read minsymtab also from
5700 (macho_symfile_read): Try to read dwarf2 frame info from main
5701 object file, but not from OSO files.
5702 (macho_symfile_offsets): Update section names for latest BFD
5704 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
5705 (x86_darwin_init_abi_64): Ditto.
5706 * solib-darwin.c: New file.
5707 * solib-darwin.h: New file.
5708 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
5710 2009-02-04 Tristan Gingold <gingold@adacore.com>
5712 * solist.h (struct target_so_ops): Comment fallback behavior for
5715 2009-02-03 Tom Tromey <tromey@redhat.com>
5717 * completer.c (add_struct_fields): Check type_name against NULL
5720 2009-02-03 Joel Brobecker <brobecker@adacore.com>
5722 * MAINTAINERS: Update Elena's email address.
5724 2009-02-02 Joel Brobecker <brobecker@adacore.com>
5726 * breakpoint (update_watchpoint): Minor comment adjustment.
5728 2009-02-02 Tom Tromey <tromey@redhat.com>
5731 * completer.c (count_struct_fields): Count method names.
5732 (add_struct_fields): Add matching method names.
5734 2009-02-02 Doug Evans <dje@google.com>
5736 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
5737 doing any further tcl/tk configury. Don't configure gdbtk if
5738 tcl or tk check fails.
5739 * aclocal.m4: Regenerate.
5740 * configure: Regenerate.
5742 2009-02-02 Tom Tromey <tromey@redhat.com>
5745 * valops.c (find_overload_match): Follow typedefs before taking
5746 address of object argument.
5748 2009-02-01 Doug Evans <dje@google.com>
5750 * target.h (target_waitstatus_to_string): Declare.
5751 * target.c (target_waitstatus_to_string): New function. Copied from
5752 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
5753 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
5754 TARGET_WAITKIND_NO_HISTORY.
5755 (debug_to_wait): Call it.
5756 * infrun.c (wait_for_inferior): If debug_infrun, print result of
5758 (fetch_inferior_event): Ditto.
5760 2009-01-30 Tom Tromey <tromey@redhat.com>
5762 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
5764 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
5767 * thread.c (do_captured_list_thread_ids): Report the current
5770 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
5772 * breakpoint.c (create_breakpoint, create_breakpoints)
5773 (break_command_really, set_breakpoint): New parameter enabled.
5774 (create_breakpoint, break_command_really): Make breakpoint
5775 disabled if so requested.
5776 * breakpoint.h (set_breakpoint): New parameter enabled.
5777 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
5779 2009-01-28 Doug Evans <dje@google.com>
5781 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
5782 (amd64_displaced_step_fixup): Declare.
5783 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
5784 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
5785 and make static global.
5786 (amd64_arch_regmap_len): New static global.
5787 (amd64_arch_reg_to_regnum): New function.
5788 (struct amd64_insn): New struct.
5789 (struct displaced_step_closure): New struct.
5790 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
5791 (rex_prefix_p,skip_prefixes)
5792 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
5793 (amd64_insn_length,amd64_get_unused_input_int_reg)
5794 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
5795 (amd64_displaced_step_copy_insn)
5796 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
5797 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
5798 (amd64_displaced_step_fixup): New functions.
5799 * amd64-linux-tdep.c: #include arch-utils.h.
5800 (amd64_linux_init_abi): Install displaced stepping support.
5802 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
5803 Jerome Guitton <guitton@adacore.com>
5805 * configure, config.in: Regenerated.
5806 * configure.ac: Add --with-system-gdbinit.
5807 * main.c (get_init_files): New.
5808 (captured_main): Use get_init_files. Load system gdbinit before
5810 (print_gdb_help): Print location of init files.
5812 2009-01-28 Pedro Alves <pedro@codesourcery.com>
5814 * corefile.c (generic_search): Delete disabled code.
5815 * gdbcore.h (generic_search): Delete declaration.
5817 2009-01-26 Pedro Alves <pedro@codesourcery.com>
5819 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
5820 parent to the child.
5821 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
5822 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
5823 remove_breakpoints to remove breakpoints from the parent.
5825 2009-01-26 Pedro Alves <pedro@codesourcery.com>
5827 PR backtrace/9458, PR backtrace/8864:
5828 * frame.c (create_new_frame): Update the frame's cached PC before
5829 finding its unwinder. Use frame_id_build to build the new frame's
5831 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
5832 array values from the ``args'' array values.
5834 2009-01-26 Pedro Alves <pedro@codesourcery.com>
5836 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
5837 (create_array_type, create_set_type, init_flags_type)
5838 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
5839 with a call to XZALLOC or XCALLOC, and pairs of calls to
5840 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
5842 2009-01-26 Pedro Alves <pedro@codesourcery.com>
5844 Add "maint set|show internal-error|internal-warning quit|corefile
5845 ask|yes|no" commands.
5848 * utils.c (internal_problem_ask, internal_problem_yes)
5849 (internal_problem_no, internal_problem_modes): New.
5850 (struct internal_problem): Remove FIXME. Make should_quit and
5851 should_dump_core types to char *.
5852 (internal_vproblem, internal_error_problem)
5853 (internal_warning_problem): Adjust.
5854 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
5856 (add_internal_problem_command): New.
5857 (_initialize_utils): New.
5859 2009-01-25 Pedro Alves <pedro@codesourcery.com>
5861 * infcmd.c (program_info): Use paddress instead of casting stop_pc
5864 2009-01-24 Pedro Alves <pedro@codesourcery.com>
5866 * infrun.c (normal_stop): Don't call
5867 deprecated_update_frame_pc_hack.
5868 * frame.c (deprecated_update_frame_pc_hack)
5869 (deprecated_update_frame_base_hack): Delete, and ...
5870 (create_new_frame): ... inline here.
5871 * frame.h (deprecated_update_frame_pc_hack)
5872 (deprecated_update_frame_base_hack): Delete declarations.
5874 2009-01-23 Pedro Alves <pedro@codesourcery.com>
5876 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
5877 * cli/cli-setshow.c (do_setshow_command): Handle it.
5878 * command.h (enum var_types): Add var_zuinteger.
5879 (add_setshow_zuinteger_cmd): Declare.
5881 * valprint.c (_initialize_valprint): Change the set input-radix
5882 and set output-radix commands to zuinteger type.
5884 2009-01-23 Pedro Alves <pedro@codesourcery.com>
5887 * infrun.c (normal_stop): Tag threads as stopped, and run the
5888 hook-stop before printing the stack frame.
5890 2009-01-22 Pedro Alves <pedro@codesourcery.com>
5893 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
5896 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
5898 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
5901 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
5904 * infcmd.c (signal_command): Do not specify a resume PC.
5906 2009-01-19 Doug Evans <dje@google.com>
5908 * dummy-frame.c (dummy_frame): Replace regcache member with
5910 (dummy_frame_push): Replace caller_regcache arg with caller_state.
5911 All callers updated.
5912 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
5913 (dummy_frame_pop): Rewrite. Verify requested frame is in the
5914 dummy frame stack. Restore program state.
5915 (cleanup_dummy_frames): Rewrite.
5916 (dummy_frame_sniffer): Update. Make static.
5917 * dummy-frame.h (regcache,frame_info): Delete forward decls.
5918 (inferior_thread_state): New forward decl.
5919 (dummy_frame_push): Update prototype.
5920 * frame.c (frame_pop): dummy_frame_pop now does all the work for
5922 * infcall.c (breakpoint_auto_delete_contents): Delete.
5923 (get_function_name,run_inferior_call): New fns.
5924 (call_function_by_hand): Simplify by moving some code to
5925 get_function_name, run_inferior_call. Inferior function call wrapped
5926 in TRY_CATCH so there's less need for cleanups and all exits from
5927 proceed are handled similarily. Detect program exit.
5928 Detect program stopping in a different thread.
5929 Make error messages more consistent.
5930 * inferior.h (inferior_thread_state): Declare (opaque type).
5931 (save_inferior_thread_state,restore_inferior_thread_state,
5932 make_cleanup_restore_inferior_thread_state,
5933 discard_inferior_thread_state, get_inferior_thread_state_regcache):
5935 (save_inferior_status): Update prototype.
5936 * infrun.c: (normal_stop): When stopped for the completion of an
5937 inferior function call, verify the expected stack frame kind.
5938 (inferior_thread_state): New struct.
5939 (save_inferior_thread_state,restore_inferior_thread_state,
5940 do_restore_inferior_thread_state_cleanup,
5941 make_cleanup_restore_inferior_thread_state,
5942 discard_inferior_thread_state,
5943 get_inferior_thread_state_regcache): New functions.
5944 (inferior_status): Move stop_signal, stop_pc, registers to
5945 inferior_thread_state. Remove restore_stack_info.
5946 (save_inferior_status): Remove arg restore_stack_info.
5947 All callers updated. Remove saving of state now saved by
5948 save_inferior_thread_state.
5949 (restore_inferior_status): Remove restoration of state now done by
5950 restore_inferior_thread_state.
5951 (discard_inferior_status): Remove freeing of registers, now done by
5952 discard_inferior_thread_state.
5954 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5956 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
5957 at a time, times NUM_TO_SCROLL.
5958 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
5959 fetch the selected frame if there is no stack.
5961 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5964 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
5966 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
5967 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
5968 is thrown while handling an event, finish the thread state.
5969 (normal_stop): Use finish_thread_state cleanup.
5970 * infcmd.c (run_command_1): If an error is thrown while starting
5971 the inferior, finish the thread state.
5973 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5975 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
5976 skip breakpoints without a location (pending breakpoints).
5978 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5981 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
5983 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
5985 * thread.c (thread_command): Move call to annotate_thread_changed
5987 (do_captured_thread_select): ... here, to avoid printing an
5988 annotation if the thread change generates an exception.
5990 2009-01-16 Joel Brobecker <brobecker@adacore.com>
5992 * NEWS: Document x86_64/MinGW as a new native configuration.
5994 2009-01-16 Joel Brobecker <brobecker@adacore.com>
5996 * NEWS: Move the documentation of "info os processes" to
5997 the appropriate section (documenting the new commands).
5999 2009-01-15 Doug Evans <dje@google.com>
6001 * target.h (target_signal_to_string): Make return type const char *.
6002 (target_signal_to_name): Ditto.
6003 (target_signal_from_name): Make arg const char *.
6004 * infrun.c (sig_print_info): Update.
6005 * signals/signals.c (signals): Make array and struct members const.
6006 (target_signal_to_string): Make return type const char *.
6007 (target_signal_to_name): Ditto.
6008 (target_signal_from_name): Make arg const char *.
6010 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
6011 Tristan Gingold <gingold@adacore.com>
6013 * solist.h (struct target_so_ops): New member bfd_open.
6014 (solib_find): Add prototype.
6015 (solib_bfd_fopen): Add prototype.
6016 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
6017 from solib_bfd_open.
6018 (solib_bfd_open): Use ops->bfd_open override if present. Call
6019 solib_find and solib_bfd_open otherwise.
6021 * objfiles.h (OBJF_KEEPBFD): New define.
6022 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
6023 objfile flag is set.
6024 * solib.c (symbol_add_stub): Do not allocate second BFD for
6025 shared library; use OBJF_KEEPBFD flag on solib objfile.
6027 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
6029 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
6031 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
6033 * value.h (address_of_variable): Add prototype.
6034 (locate_var_value): Remove prototype.
6036 * findvar.c (read_var_value): Do not attempt to default frame
6038 (locate_var_value): Remove function.
6039 * valops.c (value_of_variable): Retrieve selected frame for
6040 symbols that require a frame when called with NULL block.
6041 * valops.c (address_of_variable): New function.
6043 * eval.c (evaluate_subexp_for_address): Call address_of_variable
6044 instead of calling locate_var_value.
6045 (evaluate_subexp_with_coercion): Likewise.
6047 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
6049 * NEWS: Document "define" for prefixed commands.
6050 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
6051 show_user_1 for prefix commands.
6052 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
6053 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
6054 commands. Return the containing command list.
6055 (define_command, document_command): Update to handle prefix commands.
6056 (show_user_1): Add prefix and name arguments. Handle prefix
6058 * cli/cli-script.h (show_user_1): Update prototype.
6060 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
6062 * ser-mingw.c (console_select_thread): Add return to make
6064 (pipe_select_thread): Likewise.
6065 (file_select_thread): Likewise.
6067 2009-01-14 Pedro Alves <pedro@codesourcery.com>
6069 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
6072 2009-01-14 Pedro Alves <pedro@codesourcery.com>
6074 * remote.c (extended_remote_mourn_1): Invalidate our notion of
6075 current general thread.
6077 2009-01-14 Pedro Alves <pedro@codesourcery.com>
6079 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
6080 without a live selected thread.
6082 2009-01-14 Joel Brobecker <brobecker@adacore.com>
6084 Update the copyright notice of some of the files I missed
6085 in the previous copyright update.
6087 2009-01-14 Joel Brobecker <brobecker@adacore.com>
6089 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
6090 base address instead of casting it to DWORD.
6092 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
6094 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
6095 for NULL frame pointers.
6097 2009-01-13 Mark Kettenis <kettenis@gnu.org>
6099 * utils.c (host_address_to_string): Reimplement in a way that
6100 avoids the cast of the address to long.
6102 2009-01-13 Joel Brobecker <brobecker@adacore.com>
6104 * mdebugread.c (parse_symbol): Save the symbol private data
6105 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
6106 (psymtab_to_symtab_1): Likewise.
6107 (parse_procedure): Declare variable "e" only in the scope
6108 where it is used. Extract the symbol private data using
6111 2009-01-13 Jim Blandy <jimb@codesourcery.com>
6113 Abstract out common code for copying value locations.
6115 * value.h (set_value_component_location): New declaration.
6116 * value.c (set_value_component_location): New function.
6117 (value_primitive_field): Use it.
6118 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
6119 * valops.c (search_struct_field, value_slice): Same.
6120 * ada-lang.c (coerce_unspec_val_to_type)
6121 (ada_value_primitive_packed_val): Same.
6123 2009-01-13 Joel Brobecker <brobecker@adacore.com>
6125 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
6127 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
6129 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
6131 * i386-cygwin-tdep.c: Ditto.
6132 * i386-windows-nat.c: Ditto.
6133 * windows-nat.h: Ditto.
6134 * windows-tdep.c: Ditto.
6135 * windows-tdep.h: Ditto.
6136 * windows-nat.c: Ditto.
6137 (cygwin_load_start): Redefine as CORE_ADDR.
6138 (cygwin_load_end): Ditto.
6139 (windows_make_so): Coerce result of address arithmetic to uintptr_t
6140 before coercing to CORE_ADDR to avoid a compiler warning.
6141 (handle_exception): Define addr as CORE_ADDR and coerce
6142 ExceptionAddress to uintptr_t before assigining to avoid a compiler
6144 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
6147 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
6149 Fix linking with --enable-targets=all:
6150 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
6151 (HFILES_NO_SRCDIR): Add windows-tdep.h.
6152 (ALLDEPFILES): Add windows-tdep.c.
6154 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
6156 * win32-nat.h: Delete.
6157 * windows-nat.h: Rename from win32-nat.h.
6158 * win32-nat.c: Delete.
6159 * windows-nat.c: Rename from win32-nat.c.
6160 * win32-termcap.c: Delete.
6161 * windows-termcap.c: Rename from win32-termcap.c.
6162 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
6163 * configure.ac: Handle rename from win32-termcap.c ->
6165 * configure: Regenerate.
6166 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
6167 -> windows-termcap.c.
6168 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
6170 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
6171 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
6173 (win32_make_so): Handle cygwin compiler warning due to change of
6174 load_addr from DWORD to LPVOID.
6175 (handle_load_dll): Use %p in format string to properly print address
6176 and avoid a compiler warning.
6177 (DEBUG_EXCEPTION_SIMPLE): Ditto.
6178 (handle_exception): Ditto.
6179 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
6180 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
6182 * config/i386/mingw.mh: Ditto.
6183 * config/i386/mingw64.mh: Ditto.
6185 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
6187 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
6188 arrayprint_recurse_level to a parameter. Update all the callers. New
6189 comment at autovariables.
6191 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
6193 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
6196 2009-01-11 Joel Brobecker <brobecker@adacore.com>
6198 * target.c (target_xfer_partial): Use host_address_to_string to
6199 print the address of readbuf and writebuf. Cast the address of
6200 elements inside the myaddr buffer into intptr_t.
6201 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
6202 Cast the address of elements inside the myaddr buffer into
6205 2009-01-11 Joel Brobecker <brobecker@adacore.com>
6207 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
6208 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
6209 * configure.host, configure.tgt: Add handling for x86_64/windows.
6210 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
6211 and amd64-windows-tdep.c.
6213 2009-01-11 Joel Brobecker <brobecker@adacore.com>
6215 * win32-tdep.h, win32-tdep.c: New files.
6216 * i386-cygwin-tdep.h: Delete.
6217 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
6219 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
6220 * win32-nat.c: Likewise.
6221 * configure.tgt: Add win32-tdep.o to the list of target object
6222 files for i386-cygwin and i386-mingw targets.
6224 2009-01-11 Joel Brobecker <brobecker@adacore.com>
6226 * win32-nat.h: New file.
6227 * win32-nat.c (mappings): Initialize to NULL.
6228 (win32_set_context_register_offsets): New function.
6229 * i386-windows-nat.c: New file.
6230 (mappings): Moved here from win32-nat.c.
6231 (_initialize_i386_windows_nat): New function.
6232 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
6233 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
6235 2009-01-09 Andreas Schwab <schwab@suse.de>
6237 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
6239 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
6241 * gdbtypes.c (append_composite_type_field): Correct the location of
6244 2009-01-09 Pedro Alves <pedro@codesourcery.com>
6246 * defs.h (deprecated_error_hook): Delete declaration.
6247 * interps.c (clear_interpreter_hooks): Adjust.
6248 * remote-sim.c (gdb_os_error): Don't try to call
6249 deprecated_error_hook. No need to call exit anymore.
6250 * top.c (deprecated_error_hook): Delete.
6252 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6254 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
6255 to print the address of the gdbarch pointer.
6257 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6259 * gdbarch.sh: Fix all the compilation errors on amd64-windows
6260 due to casting a pointer to a long when printing a function
6261 address. Instead, use host_address_to_string to convert our
6262 address to a string.
6263 * gdbarch.c: Regenerate.
6265 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6267 * event-top.c (async_disconnect, async_stop_sig): use "raise"
6268 instead of "kill" to raise a signal.
6270 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6272 * win32-nat.c (get_module_name): Change the type of parameter
6273 "base_address" to LPVOID. Remove unnecessary cast.
6274 (struct lm_info): Change type of load_addr to LPVOID.
6275 (win32_make_so): Change the type of parameter "load_addr"
6276 to LPVOID. Remove some unnecessary casts.
6277 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
6278 (win32_xfer_shared_libraries): Add missing cast.
6280 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6282 * win32-nat.c (has_detach_ability, set_process_privilege):
6283 Cast the result of GetProcAddress to (void *) to avoid
6284 a compilation warning.
6286 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6288 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
6291 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6293 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
6294 definition of local variable "done".
6295 (info_w32_command, handle_exception): Remove unnecessary cast.
6297 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6299 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
6300 DebugSetProcessKillOnExit. Update all uses in this file.
6301 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
6302 Update all uses in this file.
6304 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6306 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
6307 and use it when pushing the target.
6308 (win32_attach, win32_create_inferior): Update call to
6309 do_initial_win32_stuff.
6310 (win32_detach, win32_mourn_inferior): Use our ops parameter
6311 instead of the global win32_ops to unpush the target.
6313 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6315 * ser-mingw.c (ser_windows_open): Use proper type when casting
6316 in call to _open_osfhandle.
6318 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
6320 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
6322 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6324 * CONTRIBUTE: Minor reformatting.
6326 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
6328 * MAINTAINERS: Add myself to Write After Approval.
6329 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
6332 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
6334 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
6335 Call exit to make it obvious to GCC.
6337 2009-01-08 Tom Tromey <tromey@redhat.com>
6339 PR breakpoints/9350:
6340 * varobj.c (varobj_invalidate): Unconditionally free
6342 * symfile.c (syms_from_objfile): Free local_addr when returning
6344 * exec.c (exec_file_attach): Do cleanups before returning.
6345 (exec_file_command): Likewise.
6346 * corefile.c (reopen_exec_file): Do cleanups before returning.
6347 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
6349 (do_vec_free): New function.
6350 (update_global_location_list): Make a cleanup for old_locations.
6351 Do cleanups before returning. Remove unused variable 'e'.
6352 (find_condition_and_thread): Free result of parsing the
6354 (print_it_typical): Do cleanups before returning.
6355 (breakpoint_re_set_one): Always free sals.sals.
6357 2009-01-08 Joel Brobecker <brobecker@adacore.com>
6358 Emi Suzuki <emi-suzuki@tjsys.co.jp>
6360 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
6363 2009-01-07 Doug Evans <dje@google.com>
6365 * top.c (gdb_prompt_string): Delete, unused.
6367 2009-01-07 Pedro Alves <pedro@codesourcery.com>
6369 Delete ONE_PROCESS_WRITETEXT leftovers.
6371 * breakpoint.c (insert_bp_location): Delete process_warning
6373 (insert_breakpoint_locations): Adjust.
6374 (reattach_breakpoints): Adjust.
6375 * infrun.c (normal_stop): Drop "It might be running in another
6378 2009-01-07 Stan Shebs <stan@codesourcery.com>
6380 * config/pa/linux.mh (XDEPFILES): Remove.
6382 2009-01-07 Doug Evans <dje@google.com>
6384 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
6386 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
6388 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
6389 spacing, a regression from 2008-04-22.
6391 2009-01-07 Joel Brobecker <brobecker@adacore.com>
6393 * utils.c (gdb_print_host_address): Adjust implementation to
6394 reuse host_address_to_string. Move comment explaining the conversion
6395 from host address to string from here...
6396 (host_address_to_string): ... to there.
6398 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
6400 * MAINTAINERS: Add myself for write after approval privileges.
6402 2009-01-06 Tom Tromey <tromey@redhat.com>
6404 * value.c (set_internalvar): Use value_free, not xfree.
6406 2009-01-06 Jim Blandy <jimb@red-bean.com>
6408 Check return values of functions declared with warn_unused_result
6409 attribute in GLIBC 2.8.
6410 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
6411 * inflow.c (check_syscall): New function.
6412 (new_tty): Use check_syscall to check return values from open and dup.
6413 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
6414 * main.c (captured_main): Call cwd after setting up gdb_stderr;
6415 check for errors from getcwd.
6416 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
6417 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
6418 (stdio_file_fputs): Same.
6419 * utils.c (internal_vproblem): abort if last-ditch error message
6422 * top.c (gdb_init): Don't set the current directory here; that's
6423 already been done in captured_main.
6425 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
6427 * ser-tcp.c: Adjust includes.
6428 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
6429 (tcp_auto_retry, tcp_retry_limit): Declare.
6430 (TIMEOUT): Remove, in favor of tcp_retry_limit.
6431 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
6432 (wait_for_connect): New function.
6433 (net_open): Use it. Add auto-retry logic.
6434 (set_tcp_cmd, show_tcp_cmd): New functions.
6435 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
6436 and "set/show tcp connect-timeout" commands.
6437 * NEWS: Document new commands.
6439 2009-01-05 Tom Tromey <tromey@redhat.com>
6441 * python/python-internal.h (Py_ssize_t): Define as int.
6443 2009-01-05 Jim Blandy <jimb@red-bean.com>
6445 * MAINTAINERS: Fix my e-mail address as steering committee member.
6447 2009-01-03 Joel Brobecker <brobecker@adacore.com>
6449 Updated copyright notices for most files.
6451 2009-01-03 Joel Brobecker <brobecker@adacore.com>
6453 * top.c (print_gdb_version): Update copyright year.
6455 2009-01-03 Joel Brobecker <brobecker@adacore.com>
6457 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
6459 2009-01-01 Pedro Alves <pedro@codesourcery.com>
6461 PR breakpoints/9681:
6462 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
6463 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
6464 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
6465 retrow all other exceptions.
6467 For older changes see ChangeLog-2008.
6473 version-control: never