1 Wed Apr 2 14:16:51 1997 Doug Evans <dje@canuck.cygnus.com>
3 * remote-sim.c (gdbsim_open): Check return code from sim_open.
4 Update call to sim_open (new arg SIM_OPEN_DEBUG).
7 Tue Apr 1 15:04:21 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
9 * configure.in (gdbtcl): Create soft-link for gdbtcl/ directory instead
13 Mon Mar 31 14:55:53 1997 Ian Lance Taylor <ian@cygnus.com>
15 * gdbinit.in: New file.
17 * configure.in: Generate .gdbinit from gdbinit.in.
21 Sun Mar 30 12:28:24 1997 Fred Fish <fnf@cygnus.com>
23 * config/tic80/tic80.mt: Disable using the simulator
27 Sat Mar 29 13:57:20 1997 Fred Fish <fnf@cygnus.com>
29 * COPYING: Install new version of file from FSF.
30 * copying.c (show_copying_command): Update FSF address.
32 Fri Mar 28 18:33:41 1997 Ian Lance Taylor <ian@cygnus.com>
34 * Makefile.in (distclean): Remove .gdbinit.
37 Fri Mar 28 15:37:30 1997 Fred Fish <fnf@ninemoons.com>
39 * config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.
42 Fri Mar 28 15:38:04 1997 Mike Meissner <meissner@cygnus.com>
44 * remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
45 to va_list from void *, since va_list might not be a pointer
49 Fri Mar 28 17:04:02 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
51 * Makefile.in (gdbtk.o): look for GDBTK_LIBRARY in $(datadir) by
52 default, not $(srcdir).
55 Thu Mar 27 14:21:46 1997 Mark Alexander <marka@cygnus.com>
57 * remote-mips.c: Clean up comment and extraneous semicolon
58 for mips_monitor_prompt variable.
60 Thu Mar 27 12:46:58 1997 Mark Alexander <marka@cygnus.com>
62 * remote-mips.c: Add `set monitor-prompt' command.
64 Wed Mar 26 06:47:44 1997 Mark Alexander <marka@cygnus.com>
66 Fix from Peter Schauer:
67 * mdebugread.c (parse_procedure): Set address of procedure to
68 block start; this fixes problems with shared libraries introduced
71 Mon Mar 24 19:43:16 1997 Geoffrey Noer <noer@cygnus.com>
73 * symtab.c (find_pc_symtab): change to support the case
74 where the objfile is reordered and contains both coff and
75 stabs debugging info (continue on if a psymtab isn't found).
77 Sun Mar 23 16:19:20 1997 Mark Alexander <marka@cygnus.com>
79 Fixes from Peter Schauer:
80 * config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
81 REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
82 is big-endian and if registers are 32 bits.
83 * mips-tdep.c (mips_print_register, mips_extract_return_value,
84 mips_store_return_value): Fix floating-point word-order problems on
85 little-endian targets introduced by changes of Mar 21.
87 Sun Mar 23 15:43:27 1997 Stan Shebs <shebs@andros.cygnus.com>
89 * remote.c (target_resume_hook, target_wait_loop_hook): New
91 (remote_resume, remote_wait): Use them.
92 * d10v-tdep.c: Set the above hooks.
93 (tracesource): New GDB variable, controls source display in
95 (display_trace): Find and display source line if requested.
96 (trace_info): Mention empty trace buffer if appropriate.
97 (tdisassemble_command): Robustify argument handling.
99 * configure.host: Remove extra bogus Linux case.
101 Sat Mar 22 16:41:35 1997 Fred Fish <fnf@cygnus.com>
103 * remote-sim.c (simulator_command): Add comment about dealing with
106 * Makefile.in (tic80-tdep.o): Add target.
107 * configure.tgt: Add tic80 case.
108 * tic80-tdep.c: New file.
109 * config/tic80/{tic80.mt, tm-tic80.h}: New files.
112 Sat Mar 22 02:48:11 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
114 * c-exp.y (yylex): Handle nested template parameter lists.
115 * symtab.c (decode_line_2): Fix test for valid choice number.
117 Fri Mar 21 19:10:05 1997 Mark Alexander <marka@cygnus.com>
119 * mips-tdep.c (mips_push_arguments): On non-EABI architectures,
120 copy first two floating point arguments to general registers, so that
121 MIPS16 functions will receive the arguments correctly.
122 (mips_print_register): Print double registers correctly on
124 (mips_extract_return_value): Return double values correctly
125 on little-endian hosts.
127 * mdebugread.c (parse_procedure): Adjust address of procedure relative
128 to address in file descriptor record; this accounts for constant
129 strings that may precede functions in the text section. Remove
130 now-useless lowest_pdr_addr from argument list and all calls.
132 Fri Mar 21 15:36:25 1997 Michael Meissner <meissner@cygnus.com>
134 * configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
135 whether the simulator will be built by whether the Makefile in the
136 simulator directory was built.
138 * configure.in (--enable-sim-powerpc): Delete switch.
139 * configure: Regenerate.
141 Thu Mar 20 20:52:04 1997 Jeffrey A Law (law@cygnus.com)
143 * mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
146 * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
148 (gdb_os_evprintf_filtered): Similarly.
150 Wed Mar 19 16:13:22 1997 Geoffrey Noer <noer@pizza.cygnus.com>
152 New UnixWare 2.1 configuration
153 * config/i386/i386v42mp.mt: new
154 * config/i386/i386v42mp.mh: new
155 * config/i386/tm-i386v42mp.h: new
156 * config/i386/nm-i386v42mp.h: new
157 * configure.tgt: added new entries
158 * configure.host: added new entries
161 Wed Mar 19 15:16:17 1997 Martin M. Hunt <hunt@onions.cygnus.com>
163 * Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
165 * gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
166 to GDBTK_LIBRARY, which is now a path to search.
167 (gdb_path_conv): New function. Convert Cygwin32 pathname to
170 * {aclocal.m4,configure.in}: Changes for Windows builds.
172 * configure: Rebuilt.
175 Mon Mar 17 17:52:00 1997 J.T. Conklin <jtc@cygnus.com>
177 * dsrec.c (load_srec): Print leading zeroes when printing section
180 Mon Mar 17 15:00:16 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
182 * remote-sim.h: Delete - moved to ../include/remote-sim.h.
184 * Makefile.in (remote_utils_h): Update path to remote-sim.h.
186 Fri Mar 7 20:55:28 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
188 * remote-sim.c (flush_stdout, write_stderr, flush_stderr,
189 vprintf_filtered, evprintf_filtered): Callbacks that accept
192 Sat Mar 15 00:50:46 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
194 * breakpoint.c (insert_breakpoints, watchpoint_check,
195 bpstat_stop_status): Do not disable watchpoints going out of scope.
196 (insert_breakpoints): Make sure that the current frame is valid
197 before calling find_frame_addr_in_frame_chain.
199 * top.c (setup_user_args): Handle quotes and backslashes.
200 (print_gdb_version): Update copyright year.
202 Fri Mar 14 15:44:03 1997 Ian Lance Taylor <ian@cygnus.com>
204 * Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.
207 Fri Mar 14 10:01:29 1997 Tom Tromey <tromey@cygnus.com>
209 * configure: Regenerated.
210 * configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
213 Thu Mar 13 22:51:00 1997 Dawn Perchik <dawn@cygnus.com>
215 * utils.c (pollquit, notice_quit): If _WIN32, limit test for
217 (initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols
218 except under wingdb. (Contributed by Martin Hunt).
220 Thu Mar 13 12:40:49 1997 Tom Tromey <tromey@cygnus.com>
222 * configure: Regenerated.
223 * configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
225 Thu Mar 13 11:00:22 1997 Doug Evans <dje@canuck.cygnus.com>
227 * remote-sim.h (sim_state, SIM_DESC): New types.
228 (sim_open): Return a `descriptor' as result.
229 (*): New argument of descriptor result from sim_open.
230 * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
231 (gdbsim_open): Record result of sim_open in gdbsim_desc.
232 Pass argv list to sim_open, argv[0] = pseudo program name.
233 (*): Pass gdbsim_desc to sim_foo fns.
235 Wed Mar 12 14:40:06 1997 Tom Tromey <tromey@cygnus.com>
237 * config.in: Regenerated.
239 * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
240 HAVE_HPUX_THREAD_SUPPORT): Define.
243 Wed Mar 12 14:29:52 1997 Tom Tromey <tromey@cygnus.com>
245 * gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
248 * configure: Regenerated.
249 * configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
254 Tue Mar 11 07:25:27 1997 Mark Alexander <marka@cygnus.com>
256 First cut at supporting simulators in gdbserver:
258 * configure, configure.in: Allow gdbserver to be configured
259 for cross-target environments.
260 * gdbserver/Makefile.in: Add simulator support.
261 * gdbserver/configure.in: Eliminate assumption that host == target.
262 Simplify using gdb/configure.tgt and gdb/configure.host.
263 Fix other minor configuration errors.
264 * gdbserver/low-sparc.c: Fix compile error.
265 * gdbserver/remote-utils.c: Eliminate assumption that registers
266 and addresses are four bytes. Fix minor compile errors and warnings.
267 * gdbserver/server.c: Rewrite numerous instances of identical code
268 for starting inferior processes to call new function start_inferior.
269 Eliminate assumption that registers and addresses are four bytes.
270 * gdbserver/server.h: Add missing prototypes to eliminate compiler
272 * gdbserver/low-sim.c: New file to mate gdbserver with simulators.
273 * config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
274 * config/i386/linux.mh: Eliminate gdbserver support as a first step
275 in moving such support from host to target makefile fragments.
276 * config/i386/linux.mt: Move gdbserver support here from linux.mh.
278 Mon Mar 10 12:27:47 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
280 * symtab.h (INIT_SAL): New macro to initialize symtab_and_line,
281 to insure consistant initialization of unused fields to zero.
282 * symtab.c: replace initializations of sals with new macro INIT_SAL.
283 * breakpoint.c: ditto.
286 * source.c: add call to INIT_SAL macro.
288 Sat Mar 8 00:16:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
290 * sparc-tdep.c (isbranch): Always handle v9 branch instructions,
291 they might get used on 32 bit targets as well.
293 Wed Mar 5 19:34:09 1997 Bob Manson <manson@charmed.cygnus.com>
295 * remote-mips.c (mips_exit_debug): Some IDT boards don't
296 send the full exit string.
298 Wed Mar 5 12:59:27 1997 Jeffrey A Law (law@cygnus.com)
300 * mn10200-tdep.c (mn10200_push_arguments): Handle new calling
302 (mn10200_store_struct_return): Likewise.
304 Tue Mar 4 10:31:02 1997 Mark Alexander <marka@cygnus.com>
306 * mips-tdep.c (mips_fetch_instruction): New function; replace
307 common code throughout with calls to it.
308 (mips_find_saved_regs): Examine MIPS16 entry instruction to determine
309 correct saved addresses of $s0 and $s1.
310 (mips_find_saved_regs, mips16_heuristic_proc_desc): Use MIPS_REGSIZE
311 instead of hardcoded 4.
312 (mips16_skip_prologue): Handle extended instructions correctly.
314 Mon Mar 3 12:29:20 1997 Doug Evans <dje@canuck.cygnus.com>
316 * defs.h (LONGEST): Move #ifndef LONGEST to outside.
317 Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
319 Thu Feb 27 18:54:11 1997 Mark Alexander <marka@cygnus.com>
321 * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
322 New macros for testing, setting, and clearing bit 0 of addresses.
323 Change numerous bits of code where bit 0 was being manipulated
326 Thu Feb 27 14:12:41 1997 Mark Alexander <marka@cygnus.com>
328 * remote-mips.c: Put back the form feeds.
330 Thu Feb 27 12:04:24 1997 Mark Alexander <marka@cygnus.com>
332 * remote-mips.c: Remove form feeds (^L) from source.
333 (mips_initialize): LSI PMON doesn't support 'set regsize' command.
334 (pmon_wait): Don't need to exit and re-enter debug mode on LSI
335 PMON after a continue; it causes target program misbehavior.
336 (mips_fetch_register): Don't fetch unsupported registers; this
337 cuts down on wasted serial traffic.
339 Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com)
341 * configure.in configure (HPUX/OSF thread support): Enable this
342 only when running GCC, since HP's thread header files use ANSI C
343 which is not supported by their default compiler.
345 * configure.host (i[3456]86-*-windows): Disable long long
346 support for WinGDB. Add mswin to configdirs.
347 * configure.in configure: Move calls to configure.host and
348 configure.tgt to the top of configure.in to allow them to set
349 config variables before they are referenced.
351 Tue Feb 25 20:21:52 1997 Stan Shebs <shebs@andros.cygnus.com>
353 * configure.tgt (mips*-*-lnews*): New target.
355 Mon Feb 24 16:35:00 1997 Jeffrey A Law (law@cygnus.com)
357 * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
358 if we're not the innermost frame. Fix minor typos.
360 Sat Feb 22 03:39:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
362 * stabsread.c (read_type): Fix handling of template names
363 with template parameters containing `::'.
365 * valops.c (search_struct_field, search_struct_method):
366 Pass correct valaddr parameter to baseclass_offset.
367 Prevent gdb crashes by making sure that the virtual base pointer
368 from an user object still points to accessible memory.
370 Tue Feb 18 13:36:34 1997 Mark Alexander <marka@cygnus.com>
372 * maint.c: Eliminate -Wall warnings by including some header files.
374 Tue Feb 18 13:06:30 1997 Mark Alexander <marka@cygnus.com>
376 * remote-sim.c (init_callbacks): Undo previous change.
378 Tue Feb 18 11:13:00 1997 Dawn Perchik <dawn@cygnus.com>
380 * maint.c: Fix dereference of pointer.
381 * remote-sim.c: Fix reference of structure member "last_error".
382 * debugify.c: Include config.h to get ANSI definitions.
384 Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com)
386 * remote-vx.c (vx_attach): Fix for PR 11356. Remove code added
387 by kung. It made no sense.
389 Fri Feb 14 13:00:07 1997 Ian Lance Taylor <ian@cygnus.com>
391 * main.c (print_gdb_help): Make static to match declaration.
393 Thu Feb 13 18:18:18 1997 Dawn Perchik <dawn@cygnus.com>
395 * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
397 Wed Feb 12 15:58:00 1997 Dawn Perchik <dawn@cygnus.com>
399 * debugify.c, debugify.h: Make safe for non-ansi compilers.
401 Wed Feb 12 15:30:00 1997 Dawn Perchik <dawn@cygnus.com>
403 * defs.h: Fix prototypes for new cleanup functions.
405 Wed Feb 12 15:08:47 1997 Dawn Perchik <dawn@cygnus.com>
407 * debugify.c, debugify.h: Fix for general gnu use. Remove C++
408 comment, add PARAMS, add license info and fix indentation.
410 Wed Feb 12 14:42:47 1997 Dawn Perchik <dawn@cygnus.com>
412 * debugify.c, debugify.h: New files. Provide common macros
413 for writing debug info to a log file or stdio.
415 Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
417 * c-valprint.c (c_val_print): Fix printing for arrays defined
418 with 0 length. A sticky tag caused this fix from
419 revision 2.32 date: 1996/04/29 23:25:27; author: dawn;
420 state: Exp; lines: +1 -0 branches: 2.32.34;
421 to not make it into devo.
423 Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
425 * defs.h: Fix cntl-C to read from the Windows message queue.
426 Add prototypes for make_final_cleanup (and the other cleanup
428 * remote-e7000.c: Fix sync code to timeout if unable to sync.
429 Change sync code to report status while trying to sync-up
430 with hardware. Add debugging output and document.
431 * ser-e7kpc.c: Swap order of len & offset to match implementation.
432 Add debugging output and document.
433 * serial.c: Add debugging output.
434 * top.c: Add call to do_final_cleanups.
435 Remove conditionals preventing Win32 from getting SIGQUIT.
436 * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
437 chain as a parameter. Extract this generic code from the cleanup
438 routines into separate funtions (*_my_cleanup). Keep old
439 functionality by passing "cleanup_chain" to the new funtions.
440 Define the cleanup chain "final_cleanup_chain" to be a cleanup
441 chain which will be executed only when gdb exits. Add functions
442 (*_final_cleanup) to match the original (*_cleanup) functions.
443 (pollquit, quit, notice_quit): Fix to read cntl-C from the
444 Windows message queue.
447 Tue Feb 11 15:36:31 1997 Doug Evans <dje@canuck.cygnus.com>
449 * m32r-rom.c: #include <sys/types.h>.
450 #ifdef out new load support if wingdb.
451 * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
454 Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com)
457 * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
458 * mn10200-tdep.c (mn10200_store_struct_return): New function.
460 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
461 extracting a return value from a register pair.
463 * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
464 be two byte aligned. Round argument sizes up to two byte boundary.
465 Write out args in two byte hunks.
466 (mn10200_push_return_address): Implement.
467 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
468 structures > 8 bytes (temporary).
469 (STORE_RETURN_VALUE): Likewise.
470 (CALL_DUMMY): No longer undefine.
471 (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
472 (REG_STRUCT_HAS_ADDR): Define.
475 Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
477 * configure.tgt: added r5900.
480 Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
482 * mips-tdep.c (non_heuristic_proc_desc): New function.
483 (find_proc_desc): Move non-heuristic proc search code into separate
485 (gdb_print_insn_mips): Use non-heuristic method to find procedure
486 descriptor, to avoid prologue examination when disassembling.
487 * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
488 aka MicroMeteor board).
489 (mips_exit_debug): Prevent protocol reinitialization if an error
490 occurs while exiting debug mode.
492 Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com)
494 * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
495 comments, formatting, etc. Plus other minor fixes for problems
496 I found during my first pass over the mn10200 port.
497 (mn10200_analyze_prologue): New function.
498 (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
499 * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
500 comments, formatting, etc. Minor fixes for problems I found during
501 my first pass over the mn10200 port.
502 (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
504 (REGISTER_VIRTUAL_TYPE): Define as a long.
505 (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
507 (STORE_RETURN_VALUE): Similarly.
509 * blockframe.c (generic_get_saved_regs): Remove unused variable
511 * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
512 inside #ifdef CALL_DUMMY.
513 (watch_command_1): Initialize target_resources_ok.
514 * command.c (do_setshow_command): Provide dummy initialization
516 * valops.c (find_function_addr): Move function & prototype inside
518 (value_arg_coerce): Similarly.
519 (value_of_variable): Provide dummy initialization of "frame".
521 Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
523 * gdbtk.c (call_wrapper): Clear running_now if an error occurs.
524 This fixes PR 11323, where gdbtk stops responding if an error occurs.
526 Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
528 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
529 to prim_record_minimal_symbol_and_info call that was missed in Jan 3
531 (scan_xcoff_symtab): Ditto.
533 Sun Feb 09 09:23:26 1997 Mark Alexander <marka@cygnus.com>
535 * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
536 from being sent to 32-bit targets by masking off upper bits.
537 * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
538 of PC on 32-bit targets.
539 (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
540 frame setup instruction.
541 (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
542 (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
543 prologue instruction. Fix warnings and bugs found by gcc -Wall.
544 * buildsym.c (finish_block): Improve handling of overlapping blocks;
545 fixes problem on MIPS16 printing function arguments.
547 Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
549 * dwarf2read.c (dwarf2_linkage_name): New function to get
550 the linkage name of a die from DW_AT_MIPS_linkage_name or
552 (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
553 new_symbol): Use it instead of accessing DW_AT_name.
554 (read_partial_die): Use DW_AT_MIPS_linkage name as name of the
555 partial die if present.
556 (dwarf2_add_member_fn): Make a copy of physname on the type obstack.
558 Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com)
560 * blockframe.c (generic_frame_chain_valid): If the new frame
561 is not INNER_THAN the old frame, then it's not valid.
563 Tue Feb 04 09:04:37 1997 Mark Alexander <marka@cygnus.com>
565 * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
566 (mips16_heuristic_proc_desc): Recognize jal(x) instruction.
568 Mon Feb 03 17:57:58 1997 Mark Alexander <marka@cygnus.com>
570 * mips-tdep.c (mips16_decode_reg_save): Distinguish between
571 sd and sw instructions correctly.
572 (heuristic_proc_start): Add support for MIPS16.
573 (mips16_get_imm, mips16_heuristic_proc_desc,
574 mips32_heuristic_proc_desc): New helper functions for
576 (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
577 (mips_push_arguments): Don't align small arguments in EABI.
578 (mips32_skip_prologue): Attempt to shrink code size a little.
581 Mon Feb 3 11:06:05 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
583 * m32r-stub.c: New -- remote protocol support for M32R cpu.
584 * m32r-rom.c: Several experiments with improved download time.
585 * .Sanitize: Add entry for m32r-stub.c
588 Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>
590 * mips-tdep.c (MIPS16_INSTLEN): Define.
591 (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
592 (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
593 of function on MIPS16.
594 (mips32_skip_prologue, mips16_skip_prologue): New helper functions
595 for mips_skip_prologue.
596 (mips_skip_prologue): Recognize both 16- and 32-bit prologues.
598 Wed Jan 29 12:45:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
600 * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
601 ../sim/common/libcommon.a.
603 Tue Jan 28 15:54:13 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
605 * blockframe.c: fix a null pointer ref in generic_get_saved_register
607 Tue Jan 28 15:39:50 1997 Geoffrey Noer <noer@cygnus.com>
609 * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
612 Mon Jan 27 14:31:52 1997 Mark Alexander <marka@cygnus.com>
614 First set of changes for mips16:
615 * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
616 MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
617 (ABOUT_TO_RETURN): Call new function mips_about_to_return.
618 (mips_breakpoint_from_pc, mips_about_to_return): Declare.
619 * mem-break.c (memory_breakpoint_from_pc): New function.
620 (memory_insert_breakpoint, memory_remove_breakpoint): Use
621 memory_breakpoint_from_pc to determine breakpoint contents and size.
622 * target.h (memory_breakpoint_from_pc): Declare.
623 * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
624 to determine size of breakpoint instruction.
625 * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
626 New helper functions for mips_find_saved_regs.
627 (mips_find_saved_regs): Recognize mips16 prologues.
628 (mips_addr_bits_remove): Strip off upper 32 bits of address
629 when target CPU is 32 bits but CORE_ADDR is 64 bits.
630 (mips_step_skips_delay): No branch delay slot on mips16.
631 (gdb_print_insn_mips): Disassemble mips16 code.
632 (mips_breakpoint_from_pc, mips_about_to_return): New functions.
634 Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com)
636 * tm-mn10200.h (NUM_REGS): Decrease to 12.
637 (REGISTER_NAMES): Elimination registers not found on the mn10200.
638 (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
639 (LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
641 Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
643 * dwarf2read.c: Replace integral tag, name and form fields in
644 internal structure definitions with the corresponding enumeration
645 types from dwarf2.h. Add default cases to switches on enumerations
647 Make quoting of string arguments in complaint messages consistent.
648 Check for NULL returns from DW_STRING.
649 (struct partial_die_info): Add sibling and has_type fields, remove
651 (DW_*): Move access macro definitions near the definition of the
653 (struct field_info): New structure to pass information about fields
654 and member functions between die processing routines.
655 (dwarf2_build_psymtabs_hard): Set cu_header_offset.
656 (scan_partial_symbols): Do not enter DW_TAG_subprogram dies into
657 the partial symbol table if the DW_AT_*_pc attributes are missing.
658 Add file scope base type definitions to the partial symbol table.
659 Skip over child dies if the die has a sibling attribute.
660 (add_partial_symbol): Enter global variables with type attributes
661 and without location descriptors into the partial symbol table.
662 Store value of DW_TAG_variable dies in the partial symbol table.
663 Do not enter global variables into the minimal symbol table.
664 Add base type definitions to the partial symbol table.
665 (psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc.
666 (process_die): Move check for DW_AT_low_pc to read_func_scope.
667 Add a typedef symbol for base type definitions to the symbol table.
668 Ignore DW_TAG_inlined_subroutine tags for now.
669 (read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds.
670 (read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds
671 to determine pc bounds, ignore dies with invalid bounds.
672 (dwarf2_get_pc_bounds): New routine to extract and validate the
673 DW_AT_*_pc attributes of a die.
674 (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
675 dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
676 New functions to handle fields and member functions.
677 (read_structure_scope): Rewritten to use them.
678 (read_array_type): Renamed from dwarf_read_array_type.
679 Default upper array bound to describe an array with unspecified
681 Create array types in backwards order, as dwarf2 puts out the array
682 dimensions from left to right.
683 (read_subroutine_type): Handle DW_TAG_unspecified_parameters,
684 DW_AT_artificial and DW_AT_prototyped.
685 (read_base_type): Make an unsigned type for DW_ATE_boolean.
686 Pass objfile to dwarf_base_type.
687 (read_partial_die): Use read_attribute to read in the attributes.
688 Handle DW_AT_sibling and DW_AT_type.
689 Follow references when determining DW_AT_name and DW_AT_external
690 attributes of the die.
691 Validate DW_AT_*_pc attributes.
692 (read_full_die): Use read_attribute to read in the attributes.
693 (read_attribute): New function to read an attribute described
694 by an abbreviated attribute.
695 (new_symbol): Relocate symbol value for DW_TAG_label with baseaddr.
696 Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
697 SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
698 Change symbol class for global variables with a zero valued location
699 descriptor to LOC_UNRESOLVED.
700 Handle DW_AT_const_value attributes for DW_TAG_variable,
701 DW_TAG_formal_parameter and DW_TAG_enumerator.
702 Build a typedef symbol for DW_TAG_base_type.
703 (dwarf2_const_value): New routine to copy a constant value from an
704 attribute to a symbol.
705 (dwarf_base_type): Use passed in objfile, not current_objfile
706 when calling dwarf2_fundamental_type.
707 (dump_die): Use DW_* accessor macros to access values of attributes.
708 (decode_locdesc): Handle DW_OP_plus_uconst.
710 Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
712 * mn10200-tdep.c: New file.
713 * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
714 SP_REGNUM and FP_REGNUM are different, also no lar or lir.
715 * config/mn10200/mn10200.mt: New file.
716 * configure.tgt: add mn10200 entry.
718 Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com)
720 * configure.in configure: Check if host has libdl if doing
723 Tue Jan 21 17:03:26 1997 Geoffrey Noer <noer@cygnus.com>
725 * mn10300-tdep.c: Wrote/fixed implementations of
726 mn10300_frame_chain, mn10300_init_extra_frame_info,
727 mn10300_frame_saved_pc
728 * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
729 and INIT_FRAME_PC macros.
731 Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com)
733 * configure.in configure: Check if host has libm. Make sure we
734 are using gcc when using the -export-dynamic option. Fixes a
735 problem with building under Solaris/SunPro cc.
737 Mon Jan 20 13:52:13 1997 Mark Alexander <marka@cygnus.com>
739 * config/mips/{embed,embed64,embedl,embedl64}.mt:
740 Link in simulator on MIPS embedded targets.
742 Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
744 * blockframe.c (frameless_look_for_prologue): Mark frames
745 with a zero PC as frameless to improve backtraces from core dumps
746 caused by dereferencing a NULL function pointer.
748 Thu Jan 16 14:10:41 1997 Geoffrey Noer <noer@cygnus.com>
750 * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
752 Tue Jan 14 16:01:06 1997 Geoffrey Noer <noer@cygnus.com>
754 * mn10300-tdep.c: made a lot more generic, ripping out code
755 from copied target (no more mn10300_scan_prologue,
756 init_extra_frame_info, and mn10300_fix_call_dummy calls)
757 * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
758 and INIT_FRAME_PC macros
760 Thu Jan 9 11:44:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
762 * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
763 FP_REGISTER_BYTES to compute offsets into the saved frame,
764 since it fails for SPARC targets configured without any
765 FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE.
767 Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com)
769 * symtab.c (fixup_symbol_section): Handle NULL symbols without
772 Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com)
774 * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
775 ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
777 * configure configure.in: Clean up test cases around thread support.
779 * configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
782 * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
783 printcmd.c valops.c value.h values.c: Add bfd_section arg to
784 value_at and value_at_lazy.
785 * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
786 Add bfd_section arg to prim_record_minimal_symbol_and_info.
787 * corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
788 instead of read_memory. It takes a bfd_section arg.
789 * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
790 unnecessary cast for assignment of struct dbx_symfile_info.
791 Struct objfile now uses a real pointer instead of PTR for this
793 * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
794 text, data and bss into dbx_symfile_info.
795 * exec.c (xfer_memory): Handle transfers for user-specified
797 * findvar.c (read_var_value locate_var_value): Copy bfd section
798 from the symbol to the value.
799 * gdb-stabs.h: Add section pointers for text, data and bss
801 * maint.c (translate address command): Add test code for overlay
803 * printcmd.c (do_examine do_one_display): Now takes a bfd section
805 * (print_formatted x_command): Record current section along with
806 current address for repeated commands.
807 * sparc-nat.c (fetch_inferior_registers): Change
808 target_xfer_memory to target_{read write}_memory to allow changes
809 to target_xfer_memory interface for section info.
810 * symmisc.c (dump_msymbols print_symbol): Print section
811 assocaited with symbol.
812 * symtab.c (fixup_symbol_section): New routine to
813 add section info to symbols returned by lookup_symbol.
814 * symtab.h (struct general_symbol_info): Add bfd section to
816 * target.c target.h (target_xfer_memory): Add bfd section to
818 * (target_read_memory_section): New routine to read data from a
820 * (target_memory_bfd_section): New global variable to pass bfd
821 section in to targets.
822 * valarith.c (value_add value_addr value_array): Preserve bfd
823 section when computing new value.
824 * value.h (struct value): Add bfd section to values.
825 * values.c (allocate_value value_copy): Initialize/preserve bfd
827 * (unpack_double): Clean up _MSC_VER conditionals to remove
830 * v850ice.c: New module to support communication with NEC's
832 * config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
833 ep names with rxx names. sp and fp are renamed via a different
837 Fri Jan 3 14:20:05 1997 Geoffrey Noer <noer@cygnus.com>
839 * mn10300-tdep.c (mn10300_push_arguments): rewrote,
840 also removed code elsewhere that made use of RP_REGNUM.
841 * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
842 ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
843 arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
844 EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
846 For older changes see ChangeLog-96
852 version-control: never