1 2014-02-04 Mark Kettenis <kettenis@gnu.org>
3 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
4 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
6 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
7 register set used in ELF core dumps. Add floating-point register set.
9 2014-02-03 Kevin Buettner <kevinb@redhat.com>
11 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
12 dwarf2_to_gdb[] table using symbolic constants. Adjust
13 penultimate entry from number representing the PC register
14 to symbolic constant representing the MDR register. Add
15 constant for the PC register to the end of the table.
17 2014-02-03 Mark Kettenis <kettenis@gnu.org>
19 * bsd-kvm.c: Include <sys/param.h>
21 2014-02-03 Mark Kettenis <kettenis@gnu.org>
23 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
25 2014-01-31 Joel Brobecker <brobecker@adacore.com>
27 * ada-lang.h (clear_ada_sym_cache): Delete.
29 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
31 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
33 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
35 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
36 the sigreturn register save area only if the syscall is
39 2014-01-29 Joel Brobecker <brobecker@adacore.com>
41 * valops.c (value_slice): Minor reformatting.
43 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
45 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
47 2014-01-28 Joel Brobecker <brobecker@adacore.com>
49 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
51 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
52 (ada_ignore_descriptive_types_p): New static global.
53 (find_parallel_type_by_descriptive_type): Return immediately
54 if ada_ignore_descriptive_types_p is set.
55 (_initialize_ada_language): Register new commands "maintenance
56 set ada", "maintenance show ada", "maintenance set ada
57 ignore-descriptive-types" and "maintenance show ada
58 ignore-descriptive-types".
59 * NEWS: Add entry for new "maint ada set/show
60 ignore-descriptive-types" commands.
62 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
64 * record-btrace.c (record_btrace_close): Call btrace_teardown
67 2014-01-27 Joel Brobecker <brobecker@adacore.com>
69 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
72 2014-01-27 Joel Brobecker <brobecker@adacore.com>
74 * ada-typeprint (type_is_full_subrange_of_target_type):
76 (print_range): Add parameter bounds_prefered_p. If not set,
77 try printing range types using the name of their base type.
78 (print_range_type): Add parameter bounds_prefered_p.
79 Use it in call to print_range.
80 (print_array_type, ada_print_type): Update calls to print_range
83 2014-01-27 Joel Brobecker <brobecker@adacore.com>
85 * ada-typeprint.c (print_array_type, print_choices, print_range)
86 (print_range_bound, print_dynamic_range_bound, print_range_type):
89 2014-01-27 Joel Brobecker <brobecker@adacore.com>
91 * ada-typeprint.c (print_range): Add missing empty line
92 after local declaration.
94 2014-01-27 Joel Brobecker <brobecker@adacore.com>
96 * ada-valprint.c (print_optional_low_bound): Get index_type's
97 target type for as long as it is a TYPE_CODE_RANGE.
99 2014-01-27 Joel Brobecker <brobecker@adacore.com>
101 * procfs.c (procfs_make_note_section): Remove assertion and
104 2014-01-24 Yao Qi <yao@codesourcery.com>
106 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
107 * corelow.c (get_core_siginfo): Likewise.
109 2014-01-24 Yao Qi <yao@codesourcery.com>
111 * remote.c (remote_write_bytes_aux): Change type of 'len' to
112 ULONGEST. Don't check 'len' is negative.
113 (remote_write_bytes): Change type of 'len' to ULONGEST.
115 2014-01-23 Tom Tromey <tromey@redhat.com>
118 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
119 Handle exception from frame.block.
120 (FrameVars.fetch_frame_locals): Likewise.
122 2014-01-23 Tom Tromey <tromey@redhat.com>
125 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
126 on a NULL pointer. Move "goto error" to correct place.
128 2014-01-23 Tom Tromey <tromey@redhat.com>
131 * python/py-framefilter.c (apply_frame_filter): Call
132 ensure_python_env after computing gdbarch.
134 2014-01-23 Yao Qi <yao@codesourcery.com>
136 * target.c (raw_memory_xfer_partial): Change argument type
137 from void * to gdb_byte *.
138 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
140 2014-01-22 Doug Evans <dje@google.com>
142 New gdbserver option --debug-format=timestamp.
145 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
147 * syscalls/s390x-linux.xml: New file.
148 * syscalls/s390-linux.xml: New file.
149 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
150 (XML_SYSCALL_FILENAME_S390X): Likewise.
151 (op_svc): New enum value for SVC opcode.
152 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
153 (s390_linux_get_syscall_number): New function.
154 (s390_gdbarch_init): Register '*get_syscall_number' and the
155 syscall xml file name.
156 * data-directory/Makefile.in (SYSCALLS_FILES): Add
157 "s390-linux.xml" and "s390x-linux.xml".
158 * NEWS: Announce new feature.
160 2014-01-22 Baruch Siach <baruch@tkos.co.il>
162 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
164 2014-01-22 Pedro Alves <palves@redhat.com>
166 * xtensa-config.c: Include defs.h.
168 2014-01-22 Joel Brobecker <brobecker@adacore.com>
170 * common/common-utils.h: Add "ARI:" comment beside __func__
173 2014-01-22 Joel Brobecker <brobecker@adacore.com>
175 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
178 2014-01-21 Roland McGrath <mcgrathr@google.com>
180 * configure.ac: Call AM_PROG_INSTALL_STRIP.
181 * configure: Regenerate.
182 * aclocal.m4: Regenerate.
183 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
184 New substituted variables.
185 (install-strip): New target.
186 (INSTALL_SCRIPT): New substituted variable.
187 (FLAGS_TO_PASS): Add it.
188 (install-only): Use $(INSTALL_SCRIPT) rather than
189 $(INSTALL_PROGRAM) for gcore.
191 2014-01-20 Tom Tromey <tromey@redhat.com>
193 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
196 2014-01-20 Tom Tromey <tromey@redhat.com>
198 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
199 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
200 (deprecated_cmd_warning, complete_on_cmdlist): Update.
201 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
202 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
203 (struct cmd_list_element) <flags>: Remove.
204 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
205 doc_allocated>: New fields.
206 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
208 * maint.c (maintenance_do_deprecate): Update.
209 * top.c (execute_command): Update.
211 2014-01-20 Baruch Siach <baruch@tkos.co.il>
213 * xtensa-linux-nat.c: Include asm/ptrace.h.
215 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
217 * Makefile.in (SFILES): Add d-support.c.
218 (COMMON_OBS): Add d-support.o.
219 * d-lang.h (d_parse_symbol): Add comment, now defined in
221 * d-lang.c (parse_call_convention)
222 (parse_attributes, parse_function_types)
223 (parse_function_args, parse_type, parse_identifier)
224 (call_convention_p, d_parse_symbol): Move functions to ...
225 * d-support.c: ... New file.
227 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
229 * d-lang.h (d_parse_symbol): Add declaration.
230 * d-lang.c (extract_identifiers)
231 (extract_type_info): Remove functions.
232 (parse_call_convention, parse_attributes)
233 (parse_function_types, parse_function_args)
234 (parse_type, parse_identifier, call_convention_p)
235 (d_parse_symbol): New functions.
236 (d_demangle): Use d_parse_symbol to demangle D symbols.
238 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
240 * d-lang.h (struct builtin_d_type): New data type.
241 (builtin_d_type): Add declaration.
242 * d-lang.c (d_language_arch_info, build_d_types)
243 (builtin_d_type): New functions.
244 (enum d_primitive_types): New data type.
245 (d_language_defn): Change c_language_arch_info to
246 d_language_arch_info.
247 (d_type_data): New static variable.
248 (_initialize_d_language): Initialize d_type_data.
250 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
252 * d-lang.h (d_main_name): Add declaration.
253 * d-lang.c (d_main_name): New function.
254 * symtab.c (find_main_name): Add call to d_main_name.
256 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
258 * d-lang.c (d_language_defn): Change macro_expansion_c to
261 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
263 * MAINTAINERS: Add myself as a write-after-approval maintainer.
265 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
267 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
268 gdb_exception" declaration.
269 * remote.c (getpkt_or_notif_sane): Likewise.
271 2014-01-17 Doug Evans <dje@google.com>
273 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
274 function, contents of dirnames_to_char_ptr_vec_append moved here.
275 (delim_string_to_char_ptr_vec): New function.
276 (dirnames_to_char_ptr_vec_append): Rewrite.
277 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
279 2014-01-17 Doug Evans <dje@google.com>
281 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
283 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
284 #include "common-utils.h".
285 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
286 * common/vec.h (VEC_ASSERT_PASS): Update.
287 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
288 (MACH_CHECK_ERROR): Update.
290 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
292 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
294 * gdbarch.h: Regenerate.
296 2014-01-16 Tom Tromey <tromey@redhat.com>
298 * value.c (struct value) <regnum>: Move earlier.
300 2014-01-16 Tom Tromey <tromey@redhat.com>
302 * remote.c (extended_remote_create_inferior): Rename from
303 extended_remote_create_inferior_1. Add "ops" argument. Remove
306 2014-01-16 Pedro Alves <palves@redhat.com>
308 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
309 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
312 2014-01-16 Doug Evans <dje@google.com>
314 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
316 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
318 * btrace.h (btrace_thread_flag): New.
319 (struct btrace_thread_info) <flags>: New.
320 * record-btrace.c (record_btrace_resume_thread)
321 (record_btrace_find_thread_to_move, btrace_step_no_history)
322 (btrace_step_stopped, record_btrace_start_replaying)
323 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
324 (record_btrace_find_resume_thread): New.
325 (record_btrace_resume, record_btrace_wait): Extend.
326 (record_btrace_can_execute_reverse): New.
327 (record_btrace_open): Fail in non-stop mode.
328 (record_btrace_set_replay): Split into this, ...
329 (record_btrace_stop_replaying): ... this, ...
330 (record_btrace_clear_histories): ... and this.
331 (init_record_btrace_ops): Init to_can_execute_reverse.
334 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
336 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
337 (forward_target_decr_pc_after_break)
338 (target_decr_pc_after_break): New.
339 * target.c (forward_target_decr_pc_after_break)
340 (target_decr_pc_after_break): New.
341 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
342 instead of gdbarch_decr_pc_after_break.
343 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
344 instead of gdbarch_decr_pc_after_break.
345 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
346 instead of gdbarch_decr_pc_after_break.
347 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
348 instead of gdbarch_decr_pc_after_break.
349 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
350 instead of gdbarch_decr_pc_after_break.
351 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
352 instead of gdbarch_decr_pc_after_break.
354 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
356 * btrace.c: Include regcache.h.
357 (btrace_add_pc): New.
358 (btrace_enable): Call btrace_add_pc.
359 (btrace_is_empty): New.
360 * btrace.h (btrace_is_empty): New.
361 * record-btrace.c (require_btrace, record_btrace_info): Call
364 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
366 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
368 (linux_disable_btrace): Change return type.
369 * common/linux-btrace.h (linux_read_btrace): Change parameters
370 and return type to allow error reporting. Update users.
371 (linux_disable_btrace): Change return type. Update users.
372 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
375 (btrace_block) <begin>: Comment on BEGIN == 0.
376 * btrace.c (btrace_compute_ftrace): Start from the end of
378 (btrace_stitch_trace, btrace_clear_history): New.
379 (btrace_fetch): Read delta trace, return if replaying.
380 (btrace_clear): Move clear history code to btrace_clear_history.
381 (parse_xml_btrace): Throw an error if parsing failed.
382 * target.h (struct target_ops) <to_read_btrace>: Change parameters
383 and return type to allow error reporting.
384 (target_read_btrace): Change parameters and return type to allow
386 * target.c (target_read_btrace): Update.
387 * remote.c (remote_read_btrace): Support delta reads. Pass
391 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
393 * record.h (record_btrace_frame_unwind)
394 (record_btrace_tailcall_frame_unwind): New declarations.
395 * dwarf2-frame: Include record.h
396 (dwarf2_frame_cfa): Throw an error for btrace frames.
397 * record-btrace.c: Include hashtab.h.
398 (btrace_get_bfun_name): New.
399 (btrace_call_history): Call btrace_get_bfun_name.
400 (struct btrace_frame_cache): New.
402 (bfcache_hash, bfcache_eq, bfcache_new): New.
403 (btrace_get_frame_function): New.
404 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
405 (record_btrace_frame_this_id): Compute own id.
406 (record_btrace_frame_prev_register): Provide PC, throw_error
407 for all other registers.
408 (record_btrace_frame_sniffer): Detect btrace frames.
409 (record_btrace_tailcall_frame_sniffer): New.
410 (record_btrace_frame_dealloc_cache): New.
411 (record_btrace_frame_unwind): Add new functions.
412 (record_btrace_tailcall_frame_unwind): New.
413 (_initialize_record_btrace): Allocate cache.
414 * btrace.c (btrace_clear): Call reinit_frame_cache.
417 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
419 * record-btrace.c (record_btrace_set_replay)
420 (record_btrace_goto_begin, record_btrace_goto_end)
421 (record_btrace_goto): New.
422 (init_record_btrace_ops): Initialize them.
425 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
427 * record-btrace.c (record_btrace_find_new_threads)
428 (record_btrace_thread_alive): New.
429 (init_record_btrace_ops): Initialize to_find_new_threads and
432 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
434 * record-btrace.c (record_btrace_resume): New.
435 (record_btrace_wait): New.
436 (init_record_btrace_ops): Initialize to_wait and to_resume.
438 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
440 * record-btrace.c (record_btrace_xfer_partial)
441 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
442 (record_btrace_allow_memory_access): New.
443 (init_record_btrace_ops): Initialize new methods.
444 * target.c (raw_memory_xfer_partial): Bail out if target reports
445 that this memory is not available.
447 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
449 * target.h (target_ops) <to_insert_breakpoint>
450 <to_remove_breakpoint>: Add target_ops parameter.
451 (forward_target_insert_breakpoint): New.
452 (forward_target_remove_breakpoint): New.
453 (memory_remove_breakpoint, memory_insert_breakpoint):
454 Add target_ops parameter.
455 * target.c (target_insert_breakpoint): Split into this and ...
456 (forward_target_insert_breakpoint): ... this.
457 (target_remove_breakpoint): Split into this and ...
458 (forward_target_remove_breakpoint): ... this.
459 (debug_to_insert_breakpoint): Add target_ops parameter.
460 Call forward_target_insert_breakpoint.
461 (debug_to_remove_breakpoint): Add target_ops parameter.
462 Call forward_target_remove_breakpoint.
463 (update_current_target): Do not inherit or default to_insert_breakpoint
464 and to_remove_breakpoint.
465 * corelow.c (ignore): Add target_ops parameter.
466 * exec.c (ignore): Add target_ops parameter.
467 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
468 Add target_ops parameter.
469 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
470 Add target_ops parameter.
471 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
472 Add target_ops parameter.
473 * record-full.c (record_full_beneath_to_insert_breakpoint)
474 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
475 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
476 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
477 (record_full_core_remove_breakpoint): Add target_ops parameter.
479 (record_full_beneath_to_insert_breakpoint_ops)
480 (record_full_beneath_to_remove_breakpoint_ops)
481 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
482 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
483 tmp_to_remove_breakpoint_ops,
484 record_full_beneath_to_insert_breakpoint_ops, and
485 record_full_beneath_to_remove_breakpoint_ops.
486 * remote-m32r-sdi.c (m32r_insert_breakpoint)
487 (m32r_remove_breakpoint): Add target_ops parameter.
488 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
489 Add target_ops parameter.
490 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
491 Add target_ops parameter.
493 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
494 Markus Metzger <markus.t.metzger@intel.com>
496 * record-btrace.c: Include frame-unwind.h.
497 (record_btrace_frame_unwind_stop_reason)
498 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
499 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
501 (init_record_btrace_ops): Install it.
503 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
505 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
508 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
510 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
513 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
515 * frame-unwind.c: Include target.h.
516 (frame_unwind_try_unwinder): New function with code from ...
517 (frame_unwind_find_by_frame): ... here. New variable
518 unwinder_from_target, call also target_get_unwinder)
519 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
520 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
521 * target.h (struct target_ops): New fields to_get_unwinder and
522 to_get_tailcall_unwinder.
523 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
525 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
527 * record-btrace.c (record_btrace_fetch_registers)
528 (record_btrace_store_registers)
529 (record_btrace_to_prepare_to_store): New.
530 (init_record_btrace_ops): Add the above.
532 2014-01-16 Tom Tromey <tromey@redhat.com>
534 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
535 * target.h (struct target_ops) <to_prepare_to_store>: Add
537 (target_prepare_to_store): Add argument.
538 * target.c (debug_to_prepare_to_store): Add argument.
539 (update_current_target): Update.
540 * remote.c (remote_prepare_to_store): Add 'self' argument.
541 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
542 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
543 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
544 * record-full.c (record_full_core_prepare_to_store): Add 'self'
546 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
547 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
548 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
549 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
550 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
552 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
554 * btrace.h (replay) <replay>: New.
555 (btrace_is_replaying): New.
556 * btrace.c (btrace_clear): Free replay iterator.
557 (btrace_is_replaying): New.
558 * record-btrace.c (record_btrace_is_replaying): New.
559 (record_btrace_info): Print insn number if replaying.
560 (record_btrace_insn_history): Start at replay position.
561 (record_btrace_call_history): Start at replay position.
562 (init_record_btrace_ops): Init to_record_is_replaying.
564 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
566 * record-btrace.c (record_btrace_insn_history_range): Include
568 (record_btrace_insn_history_from): Adjust range.
569 (record_btrace_call_history_range): Include
571 (record_btrace_call_history_from): Adjust range.
572 * NEWS: Announce changes.
574 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
576 * record.h (enum record_print_flag)
577 <record_print_indent_calls>: New.
578 * record.c (get_call_history_modifiers): Recognize /c modifier.
579 (_initialize_record): Document /c modifier.
580 * record-btrace.c (btrace_call_history): Add btinfo parameter.
581 Reorder fields. Optionally indent the function name. Update
583 * NEWS: Announce changes.
585 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
587 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
589 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
591 * btrace.c (ftrace_new_function): Start counting at one.
592 * record-btrace.c (record_btrace_info): Adjust number of calls
596 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
598 * record-btrace.c (btrace_call_history_insn_range): Print
599 insn range as [begin, end].
601 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
603 * btrace.h (struct btrace_func_link): New.
604 (enum btrace_function_flag): New.
605 (struct btrace_inst): Rename to ...
606 (struct btrace_insn): ...this. Update all users.
607 (struct btrace_func) <ibegin, iend>: Remove.
608 (struct btrace_func_link): New.
609 (struct btrace_func): Rename to ...
610 (struct btrace_function): ...this. Update all users.
611 (struct btrace_function) <segment, flow, up, insn, insn_offset)
612 (number, level, flags>: New.
613 (struct btrace_insn_iterator): Rename to ...
614 (struct btrace_insn_history): ...this.
616 (struct btrace_insn_iterator, btrace_call_iterator): New.
617 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
618 (struct btrace_target_info) <begin, end, level>
619 <insn_history, call_history>: New.
620 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
621 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
622 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
623 (btrace_call_number, btrace_call_begin, btrace_call_end)
624 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
625 (btrace_find_function_by_number, btrace_set_insn_history)
626 (btrace_set_call_history): New.
627 * btrace.c (btrace_init_insn_iterator)
628 (btrace_init_func_iterator, compute_itrace): Remove.
629 (ftrace_print_function_name, ftrace_print_filename)
630 (ftrace_skip_file): Change
632 (ftrace_init_func): Remove.
633 (ftrace_debug): Use new btrace_function fields.
634 (ftrace_function_switched): Also consider gaining and
635 losing symbol information).
636 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
637 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
638 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
640 (ftrace_new_function): Move. Remove debug print.
641 (ftrace_update_lines, ftrace_update_insns): New.
642 (ftrace_update_function): Check for call, ret, and jump.
643 (compute_ftrace): Renamed to ...
644 (btrace_compute_ftrace): ...this. Rewritten to compute call
646 (btrace_fetch, btrace_clear): Updated.
647 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
648 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
649 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
650 (btrace_call_number, btrace_call_begin, btrace_call_end)
651 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
652 (btrace_find_function_by_number, btrace_set_insn_history)
653 (btrace_set_call_history): New.
654 * record-btrace.c (require_btrace): Use new btrace thread
656 (record_btrace_info, btrace_insn_history)
657 (record_btrace_insn_history, record_btrace_insn_history_range):
658 Use new btrace thread info fields and new iterator.
659 (btrace_func_history_src_line): Rename to ...
660 (btrace_call_history_src_line): ...this. Use new btrace
662 (btrace_func_history): Rename to ...
663 (btrace_call_history): ...this. Use new btrace thread info
664 fields and new iterator.
665 (record_btrace_call_history, record_btrace_call_history_range):
666 Use new btrace thread info fields and new iterator.
668 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
670 * frame.h (frame_id_build_unavailable_stack_special): New.
671 * frame.c (frame_id_build_unavailable_stack_special): New.
673 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
675 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
676 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
677 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
679 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
680 (i386_insn_is_jump, i386_jmp_p): New.
681 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
682 insn_is_jump to gdbarch.
683 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
684 * gdbarch.h: Regenerated.
685 * gdbarch.c: Regenerated.
686 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
687 (default_insn_is_jump): New.
688 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
689 (default_insn_is_jump): New.
691 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
693 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
695 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
696 (btrace_read_type) <btrace_read_new>: Change to ...
697 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
699 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
701 * common/linux-btrace.c (linux_read_btrace): Free trace from
704 2014-01-15 Doug Evans <dje@google.com>
706 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
709 2014-01-15 Tom Tromey <tromey@redhat.com>
711 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
712 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
713 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
714 (set_objfile_main_name): New function.
715 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
716 language_of_main>: New fields.
717 (set_objfile_main_name): Declare.
718 * symtab.c (find_main_name): Loop over objfiles to find the main
720 (set_main_name): Now static.
721 (get_main_info): Add comment.
722 * symtab.h (set_main_name): Don't declare.
724 2014-01-15 Tom Tromey <tromey@redhat.com>
726 * symtab.c (main_progspace_key): New global.
727 (struct main_info): New.
728 (name_of_main, language_of_main): Remove.
729 (get_main_info, main_info_cleanup): New function.
730 (set_main_name, main_name, main_language): Use get_main_info.
731 (_initialize_symtab): Initialize main_progspace_key.
733 2014-01-15 Tom Tromey <tromey@redhat.com>
735 * dbxread.c (process_one_symbol): Update.
736 * dwarf2read.c (read_partial_die): Update.
737 * symfile.c (set_initial_language): Call main_language.
738 * symtab.c (language_of_main): Now static.
739 (set_main_name): Add 'lang' parameter.
740 (find_main_name): Update.
741 (main_language): New function.
742 (symtab_observer_executable_changed): Update.
743 * symtab.h (set_main_name): Update.
744 (language_of_main): Remove.
745 (main_language): Declare.
747 2014-01-15 Tom Tromey <tromey@redhat.com>
749 * symfile.c (init_entry_point_info): Use new "initialized" field.
751 * objfiles.h (struct entry_point) <initialized>: New field.
752 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
753 (struct objfile) <ei>: ...here. Remove.
754 * objfiles.c (entry_point_address_query): Update.
756 2014-01-15 Tom Tromey <tromey@redhat.com>
758 * objfiles.c (entry_point_address_query): Relocate entry point
760 (objfile_relocate1): Do not relocate entry point address.
761 * objfiles.h (struct entry_info) <entry_point>: Update comment.
762 <the_bfd_section_index>: New field.
763 * symfile.c (init_entry_point_info): Find the entry point's
766 2014-01-15 Tom Tromey <tromey@redhat.com>
768 * solib-frv.c (enable_break): Use entry_point_address_query.
770 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
772 * NEWS: Add note on improved process record-replay on
775 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
777 * arm-tdep.c (enum arm_record_result): New enum.
778 (arm_record_unsupported_insn): New function.
779 (arm_record_coproc_data_proc): Removed.
780 (thumb2_record_ld_st_multiple): New function.
781 (thumb2_record_ld_st_dual_ex_tbb): New function.
782 (thumb2_record_data_proc_sreg_mimm): New function.
783 (thumb2_record_ps_dest_generic): New function.
784 (thumb2_record_branch_misc_cntrl): New function.
785 (thumb2_record_str_single_data): New function.
786 (thumb2_record_ld_mem_hints): New function.
787 (thumb2_record_ld_word): New function.
788 (thumb2_record_lmul_lmla_div): New function.
789 (thumb2_record_decode_insn_handler): New function.
790 (decode_insn): Add thumb32 instruction handlers.
792 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
794 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
795 (struct arm_linux_record_tdep): Declare.
796 (arm_canonicalize_syscall): New function.
797 (arm_all_but_pc_registers_record): New function.
798 (arm_linux_syscall_record): New function.
799 (arm_linux_init_abi): Add syscall recording constructs.
800 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
801 decoding. (arm_record_coproc_data_proc): Update arm syscall
803 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
804 <arm_syscall_record>: New field.
805 * configure.tgt (arm*-*-linux*): Add linux-record.o to
808 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
810 * arm-tdep.c (thumb_record_misc): Update to use sp as base
811 register for push instruction recording.
813 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
815 * arm-tdep.c (thumb_record_misc): Update to correct logical
816 error while recording ldm, ldmia and pop instructions.
818 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
820 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
822 2014-01-15 Pedro Alves <palves@redhat.com>
824 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
825 (go32_resume, go32_fetch_registers, store_register)
826 (go32_store_registers, go32_prepare_to_store)
827 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
828 (go32_create_inferior, go32_can_run, go32_terminal_init)
829 (go32_terminal_inferior, go32_terminal_ours): Delete forward
832 2014-01-15 Tom Tromey <tromey@redhat.com>
834 * target.h (async_callback_ftype): New typedef.
835 (struct target_ops) <to_async>: Use it.
837 2014-01-15 Joel Brobecker <brobecker@adacore.com>
839 * python/py-value.c (get_field_type): Remove unnecessary curly
840 braces for single-statement if block.
842 2014-01-15 Joel Brobecker <brobecker@adacore.com>
844 * python/py-type.c (convert_field): Add missing empty line
847 2014-01-14 Doug Evans <dje@google.com>
849 * symfile.h (expand_symtabs_matching): Renamed from
850 expand_partial_symbol_names. Update prototype.
851 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
852 * symfile.c (expand_symtabs_matching): Renamed from
853 expand_partial_symbol_names. New args file_matcher, kind.
854 Rename arg fun to symbol_matcher.
855 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
856 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
857 ada_expand_partial_symbol_name.
858 (ada_make_symbol_completion_list): Update to call
859 expand_symtabs_matching.
860 (ada_add_global_exceptions): Call expand_symtabs_matching.
861 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
862 call map_symbol_filenames.
863 * symtab.c (sources_info): Update to call map_symbol_filenames.
864 (search_symbols): Call expand_symtabs_matching.
865 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
866 (default_make_symbol_completion_list_break_on): Update to call
867 expand_symtabs_matching.
868 (make_source_files_completion_list): Update to call
869 map_symbol_filenames.
871 2014-01-14 Doug Evans <dje@google.com>
873 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
874 (expand_symtabs_symbol_matcher_ftype): New typedef.
875 (quick_symbol_functions.expand_symtabs_matching): Update to use.
876 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
877 * symfile.c (expand_partial_symbol_names): Update to use
878 expand_symtabs_symbol_matcher_ftype.
879 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
880 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
881 Arg name_matcher renamed to symbol_matcher.
882 * psymtab.c (recursively_search_psymtabs): Update to use
883 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
885 (expand_symtabs_matching_via_partial): Update to use
886 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
887 Arg name_matcher renamed to symbol_matcher.
889 2014-01-14 Doug Evans <dje@google.com>
891 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
892 (map_partial_symbol_filenames): Ditto.
893 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
894 (map_partial_symbol_filenames): Ditto.
895 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
896 (map_partial_symbol_filenames): Ditto.
897 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
898 (map_partial_symbol_filenames): Ditto.
899 * symtab.c: Delete #include "psymtab.h".
901 2014-01-14 Pedro Alves <palves@redhat.com>
902 Tom Tromey <tromey@redhat.com>
904 * infrun.c (use_displaced_stepping): Use find_record_target
905 instead of RECORD_IS_USED.
906 (adjust_pc_after_break): Use record_full_is_used instead of
908 * record-btrace.c (record_btrace_open): Call record_preopen
909 instead of checking RECORD_IS_USED.
910 * record-full.c (record_full_shortname)
911 (record_full_core_shortname): New globals.
912 (record_full_is_used): New function.
913 (find_full_open): Call record_preopen instead of checking
915 (init_record_full_ops): Set the target's shortname to
916 record_full_shortname.
917 (init_record_full_core_ops): Set the target's shortname to
918 record_full_core_shortname.
919 * record-full.h (record_full_is_used): Declare.
920 * record.c (find_record_target): Make extern.
921 (record_preopen): New function.
922 * record.h (RECORD_IS_USED): Delete macro.
923 (find_record_target, record_preopen): Declare functions.
925 2014-01-14 Yao Qi <yao@codesourcery.com>
927 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
928 'len''s type to ULONGEST.
929 (core_xfer_shared_libraries_aix): Likewise.
930 * gdbarch.c, gdbarch.h: Regenerated.
931 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
932 Change type of 'len' to ULONGEST.
933 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
934 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
936 2014-01-14 Yao Qi <yao@codesourcery.com>
938 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
939 type of 'len' to ULONGEST.
940 (linux_xfer_osdata_processgroups): Likewise.
941 (linux_xfer_osdata_threads): Likewise.
942 (linux_xfer_osdata_fds): Likewise.
943 (linux_xfer_osdata_isockets): Likewise.
944 (linux_xfer_osdata_shm): Likewise.
945 (linux_xfer_osdata_sem): Likewise.
946 (linux_xfer_osdata_msg): Likewise.
947 (linux_common_xfer_osdata): Likewise.
948 (struct osdata_type) <getter>: Likewise.
949 * common/linux-osdata.h (linux_common_xfer_osdata): Update
952 2014-01-14 Yao Qi <yao@codesourcery.com>
954 * target.h (target_xfer_partial_ftype): Update.
955 (struct target_ops) <to_xfer_partial>: Change 'len' type to
957 * aix-thread.c (aix_thread_xfer_partial): Change type of
958 argument 'len' to ULONGEST.
959 * auxv.c (procfs_xfer_auxv): Likewise.
960 (ld_so_xfer_auxv): Likewise.
961 (memory_xfer_auxv): Likewise.
962 * bfd-target.c (target_bfd_xfer_partial): Likewise.
963 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
964 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
965 * corelow.c (core_xfer_partial): Likewise.
966 * ctf.c (ctf_xfer_partial): Likewise.
967 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
969 (darwin_read_dyld_info): Likewise.
970 (darwin_xfer_partial): Likewise.
971 * exec.c (section_table_xfer_memory_partial): Likewise.
972 (exec_xfer_partial): Likewise.
973 * exec.h (section_table_xfer_memory_partial): Update
975 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
977 (gnu_xfer_partial): Likewise.
978 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
979 (ia64_hpux_xfer_solib_got): Likewise.
980 (ia64_hpux_xfer_partial): Likewise.
981 * ia64-linux-nat.c (ia64_linux_xfer_partial):
982 * inf-ptrace.c (inf_ptrace_xfer_partial):
983 * inf-ttrace.c (inf_ttrace_xfer_partial):
984 * linux-nat.c (linux_xfer_siginfo): Likewise.
985 (linux_nat_xfer_partial): Likewise.
986 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
987 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
988 * monitor.c (monitor_xfer_memory): Likewise.
989 (monitor_xfer_partial): Likewise.
990 * procfs.c (procfs_xfer_partial): Likewise.
991 * record-full.c (record_full_xfer_partial): Likewise.
992 (record_full_core_xfer_partial): Likewise.
993 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
995 (gdbsim_xfer_partial): Likewise.
996 * remote.c (remote_xfer_partial): Likewise.
997 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
998 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1000 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1001 (rs6000_xfer_shared_libraries): Likewise.
1002 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1003 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1004 (sparc_xfer_partial): Likewise.
1005 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1006 (spu_xfer_partial): Likewise.
1007 * spu-multiarch.c (spu_xfer_partial): Likewise.
1008 * target.c (target_read_live_memory): Likewise.
1009 (memory_xfer_live_readonly_partial): Likewise.
1010 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1011 (target_xfer_partial, default_xfer_partial): Likewise.
1012 (current_xfer_partial): Likewise.
1013 * tracepoint.c (tfile_xfer_partial): Likewise.
1014 * windows-nat.c (windows_xfer_memory): Likewise. Call
1015 pulongest instead of plongest.
1016 (windows_xfer_partial): Likewise.
1017 (windows_xfer_shared_libraries): Likewise.
1019 2014-01-14 Yao Qi <yao@codesourcery.com>
1021 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1022 target_xfer_partial_ftype.
1024 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1028 * valops.c (value_struct_elt_bitpos): New function
1029 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1030 object to 'None' if the field name is an empty string ("").
1031 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1032 attribute to look for a field when 'name' is 'None'.
1033 (get_field_type): New function
1035 2014-01-13 Doug Evans <dje@google.com>
1038 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1039 (try_open_dwop_file): Ditto.
1040 * gdb_bfd.c: #include "vec.h".
1041 (bfdp): New typedef.
1042 (struct gdb_bfd_data): New member included_bfds.
1043 (gdb_bfd_unref): Unref all included bfds.
1044 (gdb_bfd_record_inclusion): New function.
1045 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1047 2014-01-13 Tom Tromey <tromey@redhat.com>
1049 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1051 2014-01-13 Tom Tromey <tromey@redhat.com>
1053 * defs.h (use_windows): Remove.
1054 * gdb.c (main): Update.
1055 * main.c (captured_main, gdb_main): Update.
1056 * main.h (struct captured_main_args) <use_windows>: Remove.
1057 * top.c (use_windows): Remove.
1059 2014-01-13 Tom Tromey <tromey@redhat.com>
1061 * defs.h (deprecated_flush_hook): Remove.
1063 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1066 * linux-thread-db.c (try_thread_db_load): Add parameter
1067 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1068 (try_thread_db_load_from_pdir_1): Move it there from here.
1069 (try_thread_db_load_from_sdir): Update caller.
1070 (try_thread_db_load_from_dir): Move it there from here.
1072 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1074 * regformats/regdat.sh: Always rewrite the register file.
1076 2014-01-13 Pedro Alves <palves@redhat.com>
1078 * Makefile.in (CHECK_HEADERS): New variable.
1079 (check-headers:): New rule.
1081 2014-01-13 Tom Tromey <tromey@redhat.com>
1083 * cli/cli-setshow.c (do_set_command): Update.
1084 * defs.h (deprecated_set_hook): Remove.
1085 * top.c (deprecated_set_hook): Remove.
1087 2014-01-13 Pedro Alves <palves@redhat.com>
1089 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1090 the tracepoint if the PC is a pseudo-register.
1092 2014-01-13 Tom Tromey <tromey@redhat.com>
1094 * defs.h (XCALLOC): Remove.
1095 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1096 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1097 * dwarf2loc.c (allocate_piece_closure): Likewise.
1098 * elfread.c (elf_symfile_segments): Likewise.
1099 (elf_symfile_segments): Likewise.
1100 * gdbtypes.c (copy_type_recursive): Likewise.
1101 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1102 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1103 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1105 * mt-tdep.c (mt_gdbarch_init): Likewise.
1106 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1108 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1109 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1110 * registry.c (registry_alloc_data): Likewise.
1111 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1112 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1113 * serial.c (serial_fdopen_ops): Likewise.
1114 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1116 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1117 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1120 2014-01-13 Tom Tromey <tromey@redhat.com>
1122 * defs.h (XMALLOC): Remove.
1123 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1124 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1125 * cli-out.c (struct ui_out *): Likewise.
1126 * cli/cli-dump.c (add_dump_command): Likewise.
1127 (add_dump_command): Likewise.
1128 * complaints.c (get_complaints): Likewise.
1129 (find_complaint): Likewise.
1130 * dwarf2-frame.c (execute_cfa_program): Likewise.
1131 * dwarf2read.c (abbrev_table_read_table): Likewise.
1132 * gdbarch.sh: Likewise.
1133 * gdbarch.c: Rebuild.
1134 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1135 * interps.c (interp_new): Likewise.
1136 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1137 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1138 * mi/mi-console.c (mi_console_file_new): Likewise.
1139 * mi/mi-interp.c (mi_interpreter_init): Likewise.
1140 * mi/mi-out.c (mi_out_new): Likewise.
1141 * mi/mi-parse.c (mi_parse): Likewise.
1142 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1143 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1144 * observer.c (xalloc_observer_list_node): Likewise.
1145 * regcache.c (regcache_xmalloc_1): Likewise.
1146 * reggroups.c (reggroup_new): Likewise.
1147 (_initialize_reggroup): Likewise.
1148 * registry.c (register_data_with_cleanup): Likewise.
1149 * remote.c (remote_notif_stop_alloc_reply): Likewise.
1150 * ser-base.c (serial_ttystate): Likewise.
1151 * ser-mingw.c (make_pipe_state): Likewise.
1152 * ser-pipe.c (pipe_open): Likewise.
1153 * serial.c (serial_open): Likewise.
1154 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1155 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1156 (tui_alloc_win_info): Likewise.
1157 (tui_add_content_elements): Likewise.
1158 * tui/tui-file.c (tui_file_new): Likewise.
1159 * tui/tui-out.c (tui_out_new): Likewise.
1160 * ui-file.c (mem_file_new): Likewise.
1161 * ui-out.c (push_level): Likewise.
1162 (make_cleanup_ui_out_end): Likewise.
1163 (append_header_to_list): Likewise.
1164 (ui_out_new): Likewise.
1165 * user-regs.c (user_reg_add_builtin): Likewise.
1167 2014-01-13 Tom Tromey <tromey@redhat.com>
1169 * defs.h (XZALLOC): Remove.
1170 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1171 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1172 (get_ada_tasks_inferior_data): Likewise.
1173 * auto-load.c (get_auto_load_pspace_data): Likewise.
1174 * auxv.c (get_auxv_inferior_data): Likewise.
1175 * bfd-target.c (target_bfd_reopen): Likewise.
1176 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1177 (deprecated_insert_raw_breakpoint): Likewise.
1178 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1179 * corelow.c (core_open): Likewise.
1180 * darwin-nat.c (darwin_check_new_threads): Likewise.
1181 (darwin_attach_pid): Likewise.
1182 * dummy-frame.c (dummy_frame_push): Likewise.
1183 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1184 * dwarf2loc.c (allocate_piece_closure): Likewise.
1185 * elfread.c (elf_symfile_segments): Likewise.
1186 * eval.c (ptrmath_type_p): Likewise.
1187 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1188 * gdbtypes.c (alloc_type_arch): Likewise.
1189 (alloc_type_instance): Likewise.
1190 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1191 * inf-child.c (inf_child_can_use_agent): Likewise.
1192 * inflow.c (get_inflow_inferior_data): Likewise.
1193 * infrun.c (save_infcall_suspend_state): Likewise.
1194 * jit.c (jit_reader_load): Likewise.
1195 (get_jit_objfile_data): Likewise.
1196 (get_jit_program_space_data): Likewise.
1197 (jit_object_open_impl): Likewise.
1198 (jit_symtab_open_impl): Likewise.
1199 (jit_block_open_impl): Likewise.
1200 (jit_frame_sniffer): Likewise.
1201 * linux-fork.c (add_fork): Likewise.
1202 * maint.c (make_command_stats_cleanup): Likewise.
1203 * objfiles.c (get_objfile_pspace_data): Likewise.
1204 * opencl-lang.c (struct lval_closure): Likewise.
1205 * osdata.c (osdata_start_osdata): Likewise.
1206 * progspace.c (new_address_space): Likewise.
1207 (add_program_space): Likewise.
1208 * remote-sim.c (get_sim_inferior_data): Likewise.
1209 * sh-tdep.c (sh_gdbarch_init): Likewise.
1210 * skip.c (Ignore): Likewise.
1211 (skip_delete_command): Likewise.
1212 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1213 (library_list_start_library): Likewise.
1214 (solib_aix_current_sos): Likewise.
1215 * solib-darwin.c (get_darwin_info): Likewise.
1216 (darwin_current_sos): Likewise.
1217 * solib-dsbt.c (get_dsbt_info): Likewise.
1218 * solib-ia64-hpux.c (new_so_list): Likewise.
1219 (ia64_hpux_get_solib_linkage_addr): Likewise.
1220 * solib-spu.c (append_ocl_sos): Likewise.
1221 (spu_current_sos): Likewise.
1222 * solib-svr4.c (get_svr4_info): Likewise.
1223 (svr4_keep_data_in_core): Likewise.
1224 (library_list_start_library): Likewise.
1225 (svr4_default_sos): Likewise.
1226 (svr4_read_so_list): Likewise.
1227 * solib-target.c (library_list_start_library): Likewise.
1228 (solib_target_current_sos): Likewise.
1229 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1230 * symfile-debug.c (install_symfile_debug_logging): Likewise.
1231 * symfile.c (default_symfile_segments): Likewise.
1232 * target-descriptions.c (tdesc_data_init): Likewise.
1233 (tdesc_create_reg): Likewise.
1234 (struct tdesc_type *): Likewise.
1235 (tdesc_create_vector): Likewise.
1236 (tdesc_set_struct_size): Likewise.
1237 (struct tdesc_type *): Likewise.
1238 (tdesc_free_feature): Likewise.
1239 (tdesc_create_feature): Likewise.
1240 * windows-nat.c (windows_add_thread): Likewise.
1241 (windows_make_so): Likewise.
1242 * xml-support.c (gdb_xml_body_text): Likewise.
1243 (gdb_xml_create_parser_and_cleanup): Likewise.
1244 (xml_process_xincludes): Likewise.
1245 * xml-syscall.c (allocate_syscalls_info): Likewise.
1246 (syscall_create_syscall_desc): Likewise.
1248 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
1250 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1251 function, with code from i386_stap_parse_special_token.
1252 (i386_stap_parse_special_token_three_arg_disp): Likewise.
1253 (i386_stap_parse_special_token): Move code to the two functions
1256 2014-01-09 Pedro Alves <palves@redhat.com>
1257 Hui Zhu <hui@codesourcery.com>
1260 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1261 bp_err_string. Don't mark the location shlib_disabled if the
1262 error thrown wasn't a generic or memory error. Catch errors
1263 thrown while inserting breakpoints in overlayed code. Output
1264 error message of software breakpoints.
1265 * remote.c (remote_insert_breakpoint): If this breakpoint has
1266 target-side commands but this stub doesn't support Z0 packets,
1267 throw NOT_SUPPORTED_ERROR error.
1268 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1269 * target.h (target_insert_breakpoint): Extend comment.
1270 (target_insert_hw_breakpoint): Add comment.
1272 2014-01-08 Pedro Alves <palves@redhat.com>
1274 * remote.c (remote_add_thread): Add threads silently if starting
1276 (remote_notice_new_inferior): If in all-stop, and starting up,
1277 don't call notice_new_inferior.
1278 (get_current_thread): New function, factored out from ...
1279 (add_current_inferior_and_thread): ... this. Adjust.
1280 (remote_start_remote) <all-stop>: Fetch the thread list. If we
1281 found any thread, then select the remote's current thread as GDB's
1284 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1286 * NEWS: Create a new section for the next release branch.
1287 Rename the section of the current branch, now that it has
1290 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1292 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
1293 * version.in: Bump version to 7.7.50.DATE-cvs.
1295 2014-01-08 Yao Qi <yao@codesourcery.com>
1297 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
1298 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
1299 (spu_xfer_partial): Cast 'buf' to 'const char *'.
1301 2014-01-08 Yao Qi <yao@codesourcery.com>
1303 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
1304 return value of bfd_get_filename to symbol_file_add_from_bfd.
1306 2014-01-08 Pierre Muller <muller@sourceware.org>
1309 * coff-pe-read.c (struct read_pe_section_data): Add index field.
1310 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
1311 to prim_record_mininal_symbol_and_info.
1312 (add_pe_forwarded_sym): Use known section number of forwarded symbol
1313 in call to prim_record_minimal_symbol_and_info.
1314 (read_pe_exported_syms): Set index field of section_data.
1316 2014-01-07 Andrew Pinski <apinski@cavium.com>
1318 * features/aarch64-core.xml (cpsr): Change to be 64bit.
1319 * features/aarch64.c: Regenerate.
1321 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
1323 * target.c (return_null): Define.
1324 (update_current_target): Use it instead of return_zero for
1325 functions that return a pointer.
1327 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
1329 * source.c (add_path): Fix check for duplicated paths in the previously
1332 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
1334 * ada-lang.c: Remove duplicated include statements.
1335 * alphabsd-nat.c: Ditto.
1336 * amd64-darwin-tdep.c: Ditto.
1337 * amd64fbsd-nat.c: Ditto.
1338 * auto-load.c: Ditto.
1340 * breakpoint.c: Ditto.
1342 * fork-child.c: Ditto.
1343 * gdb_usleep.c: Ditto.
1344 * i386-darwin-tdep.c: Ditto.
1345 * i386fbsd-nat.c: Ditto.
1347 * inferior.c: Ditto.
1349 * linux-nat.c: Ditto.
1350 * linux-tdep.c: Ditto.
1351 * m68kbsd-nat.c: Ditto.
1352 * m68klinux-nat.c: Ditto.
1353 * microblaze-tdep.c: Ditto.
1354 * mips-linux-tdep.c: Ditto.
1355 * mn10300-tdep.c: Ditto.
1356 * nto-tdep.c: Ditto.
1357 * opencl-lang.c: Ditto.
1359 * printcmd.c: Ditto.
1360 * regcache.c: Ditto.
1361 * remote-m32r-sdi.c: Ditto.
1365 * tilegx-linux-nat.c: Ditto.
1366 * tilegx-tdep.c: Ditto.
1367 * tracepoint.c: Ditto.
1369 * vaxbsd-nat.c: Ditto.
1370 * windows-nat.c: Ditto.
1371 * xtensa-tdep.c: Ditto.
1373 2014-01-07 Yao Qi <yao@codesourcery.com>
1375 * spu-linux-nat.c (_initialize_spu_nat): Declare.
1377 2014-01-07 Yao Qi <yao@codesourcery.com>
1378 Joel Brobecker <brobecker@adacore.com>
1380 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
1381 (pdc_write_regs): Likewise.
1382 (fetch_regs_kernel_thread): Likewise.
1383 (store_regs_kernel_thread): Likewise.
1385 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1387 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
1388 tagged type objects to their actual type.
1390 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1392 * ada-valprint.c (print_field_values): Add "language" parameter.
1393 Update calls to print_field_values and print_variant_part.
1394 Pass new parameter "language" in call to val_print instead
1395 of "current_language". Replace call to ada_val_print by call
1397 (print_variant_part): Add "language" parameter.
1398 (ada_val_print_struct_union): Update call to print_field_values.
1400 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1402 * ada-valprint.c (ui_memcpy): Delete.
1403 (ada_print_floating): Update documentation. Add empty line
1404 between between function documentation and implementation.
1405 Delete variable "buffer". Use ui_file_xstrdup in place of
1406 ui_file_put. Minor adjustments following this change.
1408 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1410 * ada-valprint.c (ada_val_print_string): New function,
1411 extracted from ada_val_print_array.
1412 (ada_val_print_array): Replace extracted code by call
1413 to ada_val_print_string followed by a return. Move
1414 "else" branch to the function's top block.
1416 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1418 * ada-valprint.c (ada_val_print_array): Move implementation
1419 down. Rename parameter "offset" and "val" into "offset_aligned"
1420 and "original_value" respectively. Add parameter "offset".
1422 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1424 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
1425 re-organizing the code. Change the "???" message printed
1426 when target type is a TYPE_CODE_UNDEF into
1427 "<ref to undefined type>".
1429 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1431 * ada-valprint.c (print_record): Delete, implementation inlined...
1432 (ada_val_print_struct_union): ... here. Remove call to
1433 ada_check_typedef in inlined implementation.
1435 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1437 * ada-valprint.c (ada_val_print_gnat_array): New function,
1438 extracted from ada_val_print_1;
1439 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
1440 (ada_val_print_flt, ada_val_print_struct_union)
1441 (ada_val_print_ref): Likewise.
1442 (ada_val_print_1): Delete variables i and elttype.
1443 Replace extracted-out code by call to corresponding
1446 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1448 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
1450 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1452 * ada-valprint.c (ada_val_print_1): Replace calls to
1453 ada_val_print_1 by calls to val_print.
1455 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1457 * ada-valprint.c (ada_val_print_1): Add parameter "language".
1458 Update calls to self accordingly. Replace calls to c_val_print
1459 by calls to val_print.
1461 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1463 * ada-valprint.c (print_record): Delete declaration.
1464 (adjust_type_signedness, ada_val_print_1): Likewise.
1465 (ada_val_print): Move function implementation down.
1466 (print_variant_part, print_field_values, print_record):
1467 Move function implementation up.
1469 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1471 * python/py-type.c (typy_get_name): New function.
1472 (type_object_getset): Add entry for attribute "name".
1473 * NEWS: Add entry mentioning this new attribute.
1475 2014-01-07 Yao Qi <yao@codesourcery.com>
1477 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
1480 2014-01-07 Yao Qi <yao@codesourcery.com>
1482 * gnu-nat.c (info_port_rights): Add qualifier const to
1485 2014-01-07 Yao Qi <yao@codesourcery.com>
1487 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
1489 2014-01-07 Yao Qi <yao@codesourcery.com>
1491 * gnu-nat.c (make_inf) Update declaration.
1492 (make_inf): Make it static.
1493 (inf_set_traced): Likewise.
1494 (inf_port_to_thread, inf_task_died_status): Likewise.
1496 2014-01-07 Yao Qi <yao@codesourcery.com>
1498 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
1500 2014-01-07 Yao Qi <yao@codesourcery.com>
1502 * gnu-nat.c (_initialize_gnu_nat): Declare.
1504 2014-01-07 Yao Qi <yao@codesourcery.com>
1506 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
1508 (struct gdbarch_info) <byte_order>: Change type to
1510 <byte_order_for_code>: Likewise.
1511 * gdbarch.c, gdbarch.h: Regenerated.
1513 2014-01-06 Sasha Smundak <asmundak@google.com>
1515 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
1517 2014-01-06 Tom Tromey <tromey@redhat.com>
1519 * doublest.c (convert_doublest_to_floatformat): Use const, not
1521 * somread.c (som_symtab_read): Likewise.
1523 2014-01-07 Hui Zhu <hui@codesourcery.com>
1525 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
1526 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
1527 (gdb_bfd_fopen): Ditto.
1528 (gdb_bfd_openr): Ditto.
1529 (gdb_bfd_openw): Ditto.
1530 (gdb_bfd_openr_iovec): Ditto.
1531 (gdb_bfd_fdopenr): Ditto.
1532 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
1533 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
1535 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
1537 * symfile-mem.c (symbol_file_add_from_memory): Removed
1538 gdb_bfd_stash_filename.
1540 2014-01-03 Doug Evans <dje@google.com>
1542 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
1545 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1547 Update year range in copyright notice of all files.
1549 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1551 * top.c (print_gdb_version): Set copyright year to 2014.
1553 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1555 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
1557 For older changes see ChangeLog-2013.
1563 version-control: never