gdb/ChangeLog

   1 2015-05-26  Andrew Burgess  <andrew.burgess@embecosm.com>
   2
   3         * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
   4
   5 2015-05-26  Andrew Burgess  <andrew.burgess@embecosm.com>
   6
   7         * tui/tui-regs.c (tui_reg_prev_command): New function.
   8         (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
   9         * reggroups.c (reggroup_prev): New function.
  10         * reggroups.h (reggroup_prev): Add declaration.  Update comment.
  11
  12 2015-05-26  Omair Javaid  <omair.javaid@linaro.org>
  13             Yao Qi  <yao.qi@linaro.org>
  14
  15         * aarch64-linux-tdep.c: Include linux-record.h and
  16         record-full.h.
  17         (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
  18         (aarch64_syscall): New enum.
  19         (aarch64_canonicalize_syscall): New function.
  20         (aarch64_all_but_pc_registers_record): New function.
  21         (aarch64_linux_syscall_record): New function.
  22         (aarch64_linux_init_abi): Install AArch64 process record
  23         handler.  Update to handle syscall recording.
  24         * aarch64-tdep.c: Include record.h and record-full.h.
  25         (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
  26         (struct aarch64_mem_r): Define.
  27         (aarch64_record_result): New enum.
  28         (struct insn_decode_record): Define.
  29         (insn_decode_record): New typedef.
  30         (aarch64_record_data_proc_reg): New function.
  31         (aarch64_record_data_proc_imm): New function.
  32         (aarch64_record_branch_except_sys): New function.
  33         (aarch64_record_load_store): New function.
  34         (aarch64_record_data_proc_simd_fp): New function.
  35         (aarch64_record_asimd_load_store): New function.
  36         (aarch64_record_decode_insn_handler): New function.
  37         (deallocate_reg_mem): New function.
  38         (aarch64_process_record): New function.
  39         * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
  40         New field.
  41         (aarch64_process_record): New extern declaration.
  42         * configure.tgt: Add linux-record.o to gdb_target_obs.
  43         * linux-record.h (struct linux_record_tdep) <arg7>: New field.
  44
  45 2015-05-26  Omair Javaid  <omair.javaid@linaro.org>
  46
  47         * NEWS: Add a note on process record-replay support on aarch64*-linux*
  48         targets.
  49
  50 2015-05-26  Martin Galvan  <martin.galvan@tallertechnologies.com>
  51
  52         * amd64-tdep.c: Replace in_function_epilogue_p with
  53         stack_frame_destroyed_p throughout.
  54         * arch-utils.c: Ditto.
  55         * arch-utils.h: Ditto.
  56         * arm-tdep.c: Ditto.
  57         * breakpoint.c: Ditto.
  58         * gdbarch.sh: Ditto.
  59         * hppa-tdep.c: Ditto.
  60         * i386-tdep.c: Ditto.
  61         * mips-tdep.c: Ditto.
  62         * nios2-tdep.c: Ditto.
  63         * rs6000-tdep.c: Ditto.
  64         * s390-linux-tdep.c: Ditto.
  65         * score-tdep.c: Ditto.
  66         * sh-tdep.c: Ditto.
  67         * sparc-tdep.c: Ditto.
  68         * sparc-tdep.h: Ditto.
  69         * sparc64-tdep.c: Ditto.
  70         * spu-tdep.c: Ditto.
  71         * tic6x-tdep.c: Ditto.
  72         * tilegx-tdep.c: Ditto.
  73         * xstormy16-tdep.c: Ditto.
  74         * gdbarch.c, gdbarch.h: Re-generated.
  75
  76 2015-05-22  Andrew Burgess  <andrew.burgess@embecosm.com>
  77
  78         * NEWS: Mention 'tui enable' and 'tui disable'.
  79         * tui/tui.c (tui_enable_command): New function.
  80         (tui_disable_command): New function.
  81         (_initialize_tui): New function.
  82
  83 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
  84
  85         * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
  86
  87 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
  88
  89         * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
  90         buf_ptr is freed.
  91
  92 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
  93
  94         * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
  95         into ...
  96         (tui_set_layout_for_display_command): ...here, before calling
  97         tui_set_layout.  Only set the layout if gdb has not already
  98         entered the TUI_FAILURE state.
  99
 100 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 101
 102         * tui/tui-layout.c (layout_completer): New function.
 103         (_initialize_tui_layout): Set completer on layout command.
 104
 105 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 106
 107         * tui/tui-layout.c (tui_set_layout): Remove
 108         tui_register_display_type parameter.  Remove all checking of this
 109         parameter, and reindent function.  Update header comment.
 110         (tui_set_layout_for_display_command): Rename to...
 111         (tui_set_layout_by_name): ...this, and don't check for different
 112         register class types, don't pass a tui_register_display_type to
 113         tui_set_layout.  Update header comment.
 114         (layout_names): Remove register set specific names.
 115         * tui/tui-layout.h (tui_set_layout): Remove
 116         tui_register_display_type parameter.
 117         * tui/tui.c (tui_rl_change_windows): Don't pass a
 118         tui_register_display_type to tui_set_layout.
 119         (tui_rl_delete_other_windows): Likewise.
 120         (tui_enable): Likewise.
 121         * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
 122         (TUI_FLOAT_REGS_NAME_LOWER): Remove.
 123         (TUI_GENERAL_REGS_NAME): Remove.
 124         (TUI_GENERAL_REGS_NAME_LOWER): Remove.
 125         (TUI_SPECIAL_REGS_NAME): Remove.
 126         (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
 127         (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
 128         (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
 129         (enum tui_register_display_type): Remove.
 130         (struct tui_layout_def): Remove regs_display_type and
 131         float_regs_display_type fields.
 132         (struct tui_data_info): Remove regs_display_type field.
 133         (tui_layout_command): Use new name for
 134         tui_set_layout_for_display_command.
 135         * tui/tui-data.c (layout_def): Don't initialise removed fields.
 136         (tui_clear_win_detail): Don't initialise removed fields of
 137         win_info.
 138         * tui/tui-regs.c (tui_show_registers): Use new name for
 139         tui_set_layout_for_display_command.
 140         * tui/tui.h (tui_set_layout_for_display_command): Rename
 141         declaration to...
 142         (tui_set_layout_by_name): ...this.
 143         * printcmd.c (display_command): Remove tui related layout call,
 144         and reindent.
 145
 146 2015-05-20  Joel Brobecker  <brobecker@adacore.com>
 147
 148         * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
 149         (handle_inferior_event): New function.
 150
 151 2015-05-20  Joel Brobecker  <brobecker@adacore.com>
 152
 153         * ada-lang.c (to_fixed_array_type): Rename local variable
 154         typename into type_name.
 155
 156 2015-05-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
 157
 158         Fix ASAN crash for gdb.compile/compile.exp.
 159         * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
 160
 161 2015-05-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
 162
 163         * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
 164         (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
 165         * compile/compile-object-load.c (setup_sections, compile_object_load):
 166         Likewise.
 167         * compile/compile.c (compile_to_object): Likewise.
 168
 169 2015-05-16  Doug Evans  <xdje42@gmail.com>
 170
 171         * NEWS: Mention support for unbuffered Guile memory ports.
 172         * scm-ports.c (ioscm_memory_port): Update comments on end, size.
 173         (ioscm_lseek_address): Improve overflow calculation.
 174         (gdbscm_memory_port_fill_input): Add assert.
 175         (gdbscm_memory_port_write): Handle unbuffered ports.
 176         Handle large writes identical to Guile's fport_write.
 177         (gdbscm_memory_port_seek): Fix seeking past end check.
 178         (gdbscm_memory_port_close): Handle closing unbuffered port.
 179         (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
 180         (ioscm_init_memory_port): Handle unbuffered ports.
 181         (ioscm_reinit_memory_port): Ditto.
 182         (ioscm_init_memory_port): Update size calculation.
 183         (gdbscm_open_memory): Support zero sized ports.
 184
 185 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 186
 187         * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
 188         variable compiler warnings.
 189
 190 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 191
 192         * compile/compile-object-load.c (get_out_value_type): Fix returned type.
 193
 194 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 195             Phil Muldoon  <pmuldoon@redhat.com>
 196
 197         * NEWS (Changes since GDB 7.9): Add compile print.
 198         * compile/compile-c-support.c (add_code_header, add_code_footer)
 199         (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
 200         COMPILE_I_PRINT_VALUE_SCOPE.
 201         * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
 202         (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
 203         New.
 204         * compile/compile-object-load.c: Include block.h.
 205         (get_out_value_type): New function.
 206         (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
 207         COMPILE_I_PRINT_VALUE_SCOPE.  Set compile_module's OUT_VALUE_ADDR and
 208         OUT_VALUE_TYPE.
 209         * compile/compile-object-load.h (struct compile_module): Add fields
 210         out_value_addr and out_value_type.
 211         * compile/compile-object-run.c: Include valprint.h and compile.h.
 212         (struct do_module_cleanup): Add fields out_value_addr and
 213         out_value_type.
 214         (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
 215         COMPILE_I_PRINT_VALUE_SCOPE.
 216         (compile_object_run): Propagate out_value_addr and out_value_type.
 217         Pass OUT_VALUE_ADDR.
 218         * compile/compile.c: Include valprint.h.
 219         (compile_print_value, compile_print_command): New functions.
 220         (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
 221         (_initialize_compile): Update compile code help text.  Install
 222         compile_print_command.
 223         * compile/compile.h (compile_print_value): New prototype.
 224         * defs.h (enum compile_i_scope_types): Add
 225         COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
 226
 227 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 228
 229         * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
 230         Rely on its parameter count.
 231         (compile_object_load): Replace lookup_minimal_symbol_text by
 232         lookup_global_symbol_from_objfile.  Verify FUNC_SYM.  Set it in the
 233         return value.
 234         * compile/compile-object-load.h (struct compile_module): Replace
 235         func_addr by func_sym.
 236         * compile/compile-object-run.c: Include block.h.
 237         (compile_object_run): Reset module variable after it is freed.  Use
 238         FUNC_SYM instead of FUNC_ADDR.  Rely on it.
 239
 240 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 241
 242         * compile/compile-c-support.c (print_one_macro): Use #ifndef.
 243         (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
 244         (c_compute_program): Call generate_register_struct after typedefs.
 245         * compile/compile-loc2c.c (push, pushf_register_address)
 246         (pushf_register): Cast to GCC_UINTPTR.
 247         (do_compile_dwarf_expr_to_c): Use unused attribute.  Add space after
 248         type.  Use GCC_UINTPTR instead of void *.  Remove excessive cast.
 249         (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
 250         * compile/compile.c (_initialize_compile): Enable warnings for
 251         COMPILE_ARGS.
 252
 253 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 254
 255         * cli/cli-script.c (execute_control_command): Update
 256         eval_compile_command caller.
 257         * compile/compile-object-load.c (compile_object_load): Add parameters
 258         scope and scope_data.  Set them.
 259         * compile/compile-object-load.h (struct compile_module): Add fields
 260         scope and scope_data.
 261         (compile_object_load): Add parameters scope and scope_data.
 262         * compile/compile-object-run.c (struct do_module_cleanup): Add fields
 263         scope and scope_data.
 264         (compile_object_run): Propagate the fields scope and scope_data.
 265         * compile/compile.c (compile_file_command, compile_code_command):
 266         Update eval_compile_command callers.
 267         (eval_compile_command): Add parameter scope_data.  Pass it plus scope.
 268         * compile/compile.h (eval_compile_command): Add parameter scope_data.
 269         * defs.h (struct command_line): Add field scope_data.
 270
 271 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 272
 273         * printcmd.c (struct format_data): Move it to valprint.h.
 274         (print_command_parse_format, print_value): New functions from ...
 275         (print_command_1): ... here.  Call them.
 276         * valprint.h (struct format_data): Move it here from printcmd.c.
 277         (print_command_parse_format, print_value): New declarations.
 278
 279 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 280
 281         * compile/compile-object-load.c (compile_object_load): Add
 282         COMPILE_DEBUG message.
 283
 284 2015-05-15  Jerome Guitton  <guitton@adacore.com>
 285
 286         * ada-lang.c (ada_value_ptr_subscript): Use enum position of
 287         index to get element instead of enum value.
 288         (ada_value_slice_from_ptr, ada_value_slice): Use enum position
 289         of index to compute length, but enum values to compute bounds.
 290         (ada_array_length): Use enum position of index instead of enum value.
 291         (pos_atr): Move position computation to...
 292         (ada_evaluate_subexp): Use enum values to compute bounds.
 293         * gdbtypes.c (discrete_position): ...this new function.
 294         * gdbtypes.h (discrete_position): New function declaration.
 295         * valprint.c (val_print_array_elements): Call discrete_position
 296         to handle array indexed by non-contiguous enumeration types.
 297
 298 2015-05-15  Jerome Guitton  <guitton@adacore.com>
 299
 300         * ada-lang.c (find_parallel_type_by_descriptive_type):
 301         Go through typedefs during lookup.
 302         (to_fixed_array_type): Add support for non-bit packed arrays
 303         as variable-length fields.
 304
 305 2015-05-15  Pedro Alves  <palves@redhat.com>
 306             Simon Marchi  <simon.marchi@ericsson.com>
 307
 308         * event-loop.c (gdb_notifier) <next_file_handler,
 309         next_poll_fds_index>: New fields.
 310         (get_next_file_handler_to_handle_and_advance): New function.
 311         (delete_file_handler): If deleting the next file handler to
 312         handle, advance to the next file handler.
 313         (gdb_wait_for_event): Bail early if no event fired.  Poll file
 314         handlers in round-robin fashion.
 315
 316 2015-05-15  Pedro Alves  <palves@redhat.com>
 317
 318         * linux-tdep.c (linux_find_memory_regions_full): Rename local
 319         'private' to 'priv'.
 320
 321 2015-05-15  Pedro Alves  <palves@redhat.com>
 322
 323         * nat/linux-nat.h: Include "target/waitstatus.h".
 324
 325 2015-05-15  Yuanhui Zhang  <asmwarrior@gmail.com>
 326
 327         * python/py-unwind.c (struct reg_info): Move out of ...
 328         (struct cached_frame_info): ... this scope.
 329         (pending_frame_object_type, unwind_info_object_type): Make extern.
 330
 331 2015-05-15  Joel Brobecker  <brobecker@adacore.com>
 332
 333         * ada-lang.c (ada_value_primitive_packed_val): Make sure
 334         accumSize is never negative.
 335
 336 2015-05-14  Patrick Palka  <patrick@parcs.ath.cx>
 337
 338         * tui/tui-command.c: Remove include of <ctype.h>.
 339         (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
 340
 341 2015-05-13  Martin Galvan  <martin.galvan@tallertechnologies.com>
 342
 343         * dwarf2read.c (die_needs_namespace): Return 1 for
 344         DW_TAG_inlined_subroutine.
 345
 346 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
 347
 348         * regcache.c (regcache_cpy_no_passthrough): New declaration.
 349         (regcache_cpy_no_passthrough): Make it static, add function comment.
 350         * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
 351         (regcache_cpy_no_passthrough): Remove declaration.
 352
 353 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
 354
 355         * gdbthread.h (struct thread_control_state): Update comment for
 356         proceed_to_finish.
 357         * infcall.c (run_inferior_call): Update comment about
 358         proceed_to_finish.
 359         * infcmd.c (get_return_value): Update comment about stop_registers.
 360         (finish_forward): Update comment about proceed_to_finish.
 361         * infrun.c (stop_registers): Remove.
 362         (clear_proceed_status, normal_stop): Remove stop_registers handling.
 363         * infrun.h (stop_registers): Remove.
 364
 365 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
 366
 367         * infcall.c (struct dummy_frame_context_saver)
 368         (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
 369         (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
 370         (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
 371         New.
 372         (call_function_by_hand_dummy): Move discard_cleanups of
 373         inf_status_cleanup before dummy_frame_push.  Call
 374         dummy_frame_context_saver_setup and prepare context_saver_cleanup.
 375         Use dummy_frame_context_saver_get_regs instead of stop_registers.
 376         * infcall.h (struct dummy_frame_context_saver)
 377         (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
 378         (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
 379         New declarations.
 380         * infcmd.c: Include infcall.h.
 381         (get_return_value): Add parameter ctx_saver, use it instead of
 382         stop_registers.
 383         (print_return_value): Add parameter ctx_saver, pass it.
 384         (struct finish_command_continuation_args): Add field ctx_saver.
 385         (finish_command_continuation): Update print_return_value caller.
 386         (finish_command_continuation_free_arg): Free also ctx_saver.
 387         (finish_forward): Call dummy_frame_context_saver_setup.
 388         * inferior.h (struct dummy_frame_context_saver): New declaration.
 389         (get_return_value): Add parameter ctx_saver.
 390         * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
 391         get_return_value caller.
 392
 393 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
 394
 395         * dummy-frame.c (struct dummy_frame_dtor_list): New.
 396         (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
 397         (remove_dummy_frame): Process dtor_list.
 398         (pop_dummy_frame): Process dtor_list.
 399         (register_dummy_frame_dtor): Maintain dtor_list.
 400         (find_dummy_frame_dtor): Handle dtor_list.
 401         * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
 402         Update comments.
 403
 404 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
 405
 406         * compile/compile-object-run.c (do_module_cleanup): Add parameter
 407         registers_valid.
 408         (compile_object_run): Update do_module_cleanup caller.
 409         * dummy-frame.c: Include infcall.h.
 410         (struct dummy_frame): Update dtor comment.
 411         (remove_dummy_frame): Call dtor.
 412         (pop_dummy_frame): Update dtor caller.
 413         * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
 414         registers_valid.
 415
 416 2015-05-13  Joel Brobecker  <brobecker@adacore.com>
 417
 418         GDB 7.9.1 released.
 419
 420 2015-05-13  Joel Brobecker  <brobecker@adacore.com>
 421
 422         * NEWS: Create "Changes in GDB 7.9.1" section.  Move news about
 423         Xmethods now being able to specify a result type to that new
 424         sectioin.
 425
 426 2015-05-13  Patrick Palka  <patrick@parcs.ath.cx>
 427
 428         * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
 429         first before resizing the window.
 430         * tui/tui.c (tui_enable): Likewise.
 431
 432 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
 433
 434         * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
 435         * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
 436         * infcall.c (call_function_by_hand_dummy): Use proper typedef for
 437         dummy_dtor parameter.
 438         * infcall.h: Include dummy-frame.h.
 439         (call_function_by_hand_dummy_dtor_ftype): Remove.
 440         (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
 441         parameter.
 442
 443 2015-05-13  Patrick Palka  <patrick@parcs.ath.cx>
 444
 445         PR gdb/17820
 446         * top.c (history_size_setshow_var): Change type to signed.
 447         Initialize to -2.  Update documentation.
 448         (set_readline_history_size): Define.
 449         (set_history_size_command): Use it.  Remove logic for handling
 450         out-of-range sizes.
 451         (init_history): Use set_readline_history_size().  Test for a
 452         value of -2 instead of 0 when determining whether to set a
 453         default history size.
 454         (init_main): Decode the argument of the "size" command as a
 455         zuinteger_unlimited.
 456
 457 2015-05-12  Doug Evans  <dje@google.com>
 458
 459         * dwarf2read.c (struct file_entry): Tweak comments.
 460         (get_debug_line_section): Tweak comments.
 461
 462 2015-05-12  Don Breazeal  <donb@codesourcery.com>
 463
 464         * NEWS: Announce fork support in the RSP and support
 465         for fork debugging in extended mode.
 466
 467 2015-05-12  Don Breazeal  <donb@codesourcery.com>
 468
 469         * remote.c (remote_insert_fork_catchpoint): New function.
 470         (remote_remove_fork_catchpoint): New function.
 471         (remote_insert_vfork_catchpoint): New function.
 472         (remote_remove_vfork_catchpoint): New function.
 473         (pending_fork_parent_callback): New function.
 474         (remove_new_fork_child): New function.
 475         (remote_update_thread_list): Call remote_notif_get_pending_events
 476         and remove_new_fork_child.
 477         (extended_remote_kill): Kill fork child when killing the
 478         parent before follow_fork completes.
 479         (init_extended_remote_ops): Initialize target vector with
 480         new fork catchpoint functions.
 481
 482 2015-05-12  Don Breazeal  <donb@codesourcery.com>
 483
 484         * remote.c (remove_vfork_event_p): New function.
 485         (remote_follow_fork): Add vfork event type to event checking.
 486         (remote_parse_stop_reply): New stop reasons "vfork" and
 487         "vforkdone" for RSP 'T' Stop Reply Packet.
 488
 489 2015-05-12  Don Breazeal  <donb@codesourcery.com>
 490
 491         * linux-nat.c (linux_nat_ptrace_options): New function.
 492         (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
 493         Call linux_nat_ptrace_options and use different argument to
 494         linux_enable_event_reporting.
 495         (_initialize_linux_nat): Delete call to
 496         linux_ptrace_set_additional_flags.
 497         * nat/linux-ptrace.c (current_ptrace_options): Rename to
 498         supported_ptrace_options.
 499         (additional_flags): Delete variable.
 500         (linux_check_ptrace_features): Use supported_ptrace_options.
 501         (linux_test_for_tracesysgood, linux_test_for_tracefork):
 502         Likewise, and remove additional_flags check.
 503         (linux_enable_event_reporting): Change 'attached' argument to
 504         'options'.  Use supported_ptrace_options.
 505         (ptrace_supports_feature): Change comment.  Use
 506         supported_ptrace_options.
 507         (linux_ptrace_set_additional_flags): Delete function.
 508         * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
 509         Delete function prototype.
 510         * remote.c (remote_fork_event_p): New function.
 511         (remote_detach_pid): New function.
 512         (remote_detach_1): Call remote_detach_pid, don't mourn inferior
 513         if doing detach-on-fork.
 514         (remote_follow_fork): New function.
 515         (remote_parse_stop_reply): Handle new "T" stop reason "fork".
 516         (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
 517         (init_extended_remote_ops): Initialize to_follow_fork.
 518
 519 2015-05-12  Don Breazeal  <donb@codesourcery.com>
 520
 521         * nat/linux-ptrace.c (linux_check_ptrace_features): Change
 522         from static to extern.
 523         * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
 524         * remote.c (anonymous enum): <PACKET_fork_event_feature,
 525         * PACKET_vfork_event_feature>: New enumeration constants.
 526         (remote_protocol_features): Add table entries for new packets.
 527         (remote_query_supported): Add new feature queries to qSupported
 528         packet.
 529
 530 2015-05-12  Gary Benson <gbenson@redhat.com>
 531
 532         * remote.c (remote_add_inferior): Call exec_file_locate_attach
 533         for fake PIDs as well as real ones.
 534         (remote_pid_to_exec_file): Send empty annex if PID is fake.
 535
 536 2015-05-09  Siva Chandra Reddy  <sivachandra@google.com>
 537
 538         * NEWS (Python Scripting): Mention the new gdb.Value methods.
 539         * python/py-value.c (valpy_reference_value): New function.
 540         (valpy_const_value): Likewise.
 541         (value_object_methods): Add new methods.
 542         * value.c (make_cv_value): New function.
 543         * value.h (make_cv_value): Declare.
 544
 545 2015-05-08  Yao Qi  <yao@codesourcery.com>
 546             Sandra Loosemore  <sandra@codesourcery.com>
 547
 548         * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
 549         to 'lh->include_dirs' before accessing to it.
 550         (psymtab_include_file_name): Likewise.
 551         (dwarf_decode_lines_1): Likewise.
 552         (dwarf_decode_lines): Likewise.
 553         (file_file_name): Likewise.
 554
 555 2015-05-08  Sandra Loosemore  <sandra@codesourcery.com>
 556
 557         * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
 558         (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
 559         (nios2_linux_rt_sigreturn_init): Adjust base address of
 560         register save area.
 561
 562 2015-05-08  Sandra Loosemore  <sandra@codesourcery.com>
 563
 564         * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
 565         "trap 31" as the breakpoint instruction on all targets.
 566
 567 2015-05-08  Jan Kratochvil  <jan.kratochvil@redhat.com>
 568
 569         * infcmd.c (print_return_value): Remove unused declaration.
 570
 571 2015-05-08  Joel Brobecker  <brobecker@adacore.com>
 572
 573         * dwarf2read.c (attr_to_dynamic_prop)
 574         <DW_AT_data_member_location>: Use read_type_die isntead of
 575         get_die_type.
 576
 577 2015-05-08  Joel Brobecker  <brobecker@adacore.com>
 578
 579         * ada-lang.c (ada_convert_actual): Add handling of formals
 580         passed inside an aligner type.
 581
 582 2015-05-08  Joel Brobecker  <brobecker@adacore.com>
 583
 584         * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
 585
 586 2015-05-08  Siva Chandra Reddy  <sivachandra@google.com>
 587
 588         PR python/18291
 589         * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
 590         Print xmethod matcher status.
 591
 592 2015-05-08  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 593
 594         * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
 595         register in the regcache when treating the PSWM register, and vice
 596         versa.
 597
 598 2015-05-07  Gary Benson <gbenson@redhat.com>
 599
 600         * linux-thread-db.c (struct thread_db_info)
 601         <td_ta_map_id2thr_p>: Remove field.
 602         (try_thread_db_load_1): Remove initialization for the above.
 603
 604 2015-05-07  Gary Benson <gbenson@redhat.com>
 605
 606         * linux-thread-db.c (struct thread_db_info)
 607         <td_thr_validate_p>: Remove field.
 608         (try_thread_db_load_1): Remove initialization for the above.
 609
 610 2015-05-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
 611
 612         * compile/compile-object-load.c (compile_object_load): Support
 613         mst_text_gnu_ifunc.
 614
 615 2015-05-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
 616
 617         * compile/compile.c (compile_to_object): Make the cmd_string parameter
 618         const.  Use new variables for the const compatibility.
 619         (eval_compile_command): Make the cmd_string parameter const.
 620         * compile/compile.h (eval_compile_command): Make the cmd_string
 621         parameter const.
 622
 623 2015-05-06  Joel Brobecker  <brobecker@adacore.com>
 624
 625         * defs.h (deprecated_init_ui_hook): Delete.  Remove associated
 626         comment.
 627         * top.c (deprecated_init_ui_hook): Delete.
 628         (gdb_init): Remove handling of deprecated_init_ui_hook.
 629         * interps.c (clear_interpreter_hooks): Remove handling of
 630         deprecated_init_ui_hook.
 631         * main.c (captured_main): Update comment.
 632
 633 2015-05-06  Joel Brobecker  <brobecker@adacore.com>
 634
 635         * solib.c (_initialize_solib): Add "info dll" alias creation.
 636         * windows-nat.c (set_windows_aliases): Delete.
 637         (_initialize_windows_nat): Remove deprecated_init_ui_hook
 638         assignment.
 639         * NEWS: Add news entry about "info dll" now being available
 640         on all platforms.
 641
 642 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
 643
 644         * ada-lang.c (value_assign_to_component): Reformat and improve
 645         documentation. Remove all trailing spaces.
 646
 647 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
 648
 649         * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
 650         Stop counting inlined frames as soon as an out-of-line function
 651         is found.
 652
 653 2014-05-05  Pierre-Marie de Rodat  <derodat@adacore.com>
 654
 655         * dwarf2read.c (inherit_abstract_dies): Skip
 656         DW_TAG_GNU_call_site dies while inheriting children of an
 657         abstract DIE into a scope.
 658         (read_lexical_block_scope): Inherit abstract DIE's for
 659         lexical scopes.
 660
 661 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
 662
 663         * ada-valprint.c (val_print_packed_array_elements): Delete
 664         variable "len".  Add a type-length check when comparing two
 665         consecutive elements of the array.  Use the element's actual
 666         length in call to value_contents_eq.
 667         * ada-lang.c (ada_value_primitive_packed_val): Always return
 668         a value whose type has been resolved.
 669
 670 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
 671
 672         * ada-lang.c (ada_value_primitive_packed_val): Recompute
 673         BIT_SIZE and LEN if the size of the resolved type is smaller
 674         than BIT_SIZE * HOST_CHAR_BIT.
 675
 676 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
 677
 678         * ada-lang.c (ada_value_primitive_packed_val): Use a more
 679         correct address in call to value_at.  Adjust call to
 680         value_address accordingly.
 681
 682 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
 683
 684         * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
 685         to print it.
 686
 687 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
 688
 689         * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
 690         * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
 691         pinfo->valaddr.
 692         * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
 693         * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
 694         (resolve_dynamic_type_internal): Set pinfo.valaddr.
 695         Add handling of addr_stack->valaddr.
 696         (resolve_dynamic_type): Add "valaddr" parameter.
 697         Set pinfo.valaddr field.
 698         * ada-lang.c (ada_discrete_type_high_bound): Update call to
 699         resolve_dynamic_type.
 700         (ada_discrete_type_low_bound): Likewise.
 701         * findvar.c (default_read_var_value): Likewise.
 702         * value.c (value_from_contents_and_address): Likewise.
 703
 704 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
 705
 706         * gdbtypes.c (resolve_dynamic_array): Use
 707         create_array_type_with_stride instead of create_array_type.
 708
 709 2015-04-30  DJ Delorie  <dj@redhat.com>
 710
 711         * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
 712         rl78_decode_opcode
 713
 714 2015-04-29  Doug Evans  <dje@google.com>
 715
 716         PR python/18285
 717         * NEWS: Document new gdb.XMethodWorker.get_result_type method.
 718         * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
 719         EVAL_AVOID_SIDE_EFFECTS for xmethods.
 720         * extension-priv.h (struct extension_language_ops)
 721         <get_xmethod_result_type>: New member.
 722         * extension.c (get_xmethod_result_type): New function.
 723         * extension.h (get_xmethod_result_type): Declare.
 724         * python/py-xmethods.c (get_result_type_method_name): New static
 725         global.
 726         (py_get_result_type_method_name): Ditto.
 727         (gdbpy_get_xmethod_result_type): New function.
 728         (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
 729         * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
 730         * python/python.c (python_extension_ops): Add
 731         gdbpy_get_xmethod_result_type.
 732         * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
 733         * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
 734         xmethods.
 735         (value_x_unop): Ditto.
 736         * value.c (result_type_of_xmethod): New function.
 737         * value.h (result_type_of_xmethod): Declare.
 738
 739 2015-04-29  Gary Benson <gbenson@redhat.com>
 740
 741         * solib.c (solib_find_1): Allow fd argument to be NULL.
 742         (exec_file_find): Update comment.
 743         (solib_find): Likewise.
 744         * exec.c (exec_file_locate_attach): Use NULL as fd
 745         argument to exec_file_find to avoid having to close
 746         the opened file.
 747         * infrun.c (follow_exec): Likewise.
 748
 749 2015-04-28  Doug Evans  <dje@google.com>
 750
 751         PR python/18299
 752         * python/lib/gdb/printing.py (register_pretty_printer): Handle
 753         name or __name__ attributes.  Handle gdb module as first argument.
 754
 755 2015-04-28  Doug Evans  <dje@google.com>
 756
 757         PR python/18089
 758         * python/py-prettyprint.c (print_children): Verify result of children
 759         iterator.  Provide better error message.
 760         * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
 761         * python/python.c (gdbpy_print_python_errors_p): New function.
 762
 763 2015-04-28  Doug Evans  <dje@google.com>
 764
 765         * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
 766
 767 2015-04-28  Sasha Smundak  <asmundak@google.com>
 768
 769         * NEWS: Mention gdb.Type.optimized_out method.
 770         * python/py-type.c (typy_optimized_out):  New function.
 771
 772 2015-04-28  John Baldwin  <jhb@FreeBSD.org>
 773
 774         * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
 775
 776 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
 777
 778         * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
 779         (initialize_utils): Move call of init_page_info() to ...
 780         * top.c (gdb_init): ... here.
 781
 782 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
 783
 784         * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
 785         (tui_sigwinch_handler): Still update our idea of
 786         the terminal's width and height even when TUI is not active.
 787
 788 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
 789
 790         * utils.h (set_screen_width_and_height): Declare.
 791         * utils.c (set_screen_width_and_height): Define.
 792         * tui/tui-win.c (tui_update_gdb_sizes): Use it.
 793
 794 2015-04-28  Gary Benson <gbenson@redhat.com>
 795
 796         * infrun.c (solist.h): New include.
 797         (follow_exec): Use exec_file_find to prefix execd_pathname
 798         with gdb_sysroot.
 799
 800 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
 801
 802         * tui/tui-source.c (tui_set_source_content): Avoid calling
 803         strcpy() when offset is 0.
 804
 805 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
 806
 807         PR gdb/18155
 808         * tui/tui-data.c (tui_free_window): Don't free the locator
 809         window when passed an SRC_WIN or a DISASSEM_WIN.
 810
 811 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
 812
 813         * tui/tui-data.h (struct tui_win_element): Forward-declare.
 814         (tui_win_content): Move declaration.
 815         (struct tui_gen_win_info): Give 'content' field the
 816         type tui_win_content.
 817         * tui/tui-data.c (init_content_element): Remove redundant and
 818         erroneous casts.
 819         (tui_add_content_elements): Remove erroneous cast.
 820         * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
 821         casts.
 822         (tui_get_begin_asm_address): Likewise.
 823         * tui/tui-regs.c (tui_show_registers): Likewise.
 824         (tui_show_register_group): Likewise.
 825         (tui_display_registers_from): Likewise.
 826         (tui_check_register_values): Likewise.
 827         * tui/tui-source.c (tui_set_source_content): Likewise.
 828         (tui_set_source_content_nil): Likewise.
 829         (tui_source_is_displayed): Likewise.
 830         * tui/tui-stack.c (tui_show_locator_content): Likewise.
 831         (tui_set_locator_fullname): Likewise.
 832         (tui_set_locator_info): Likewise.
 833         (tui_show_frame_info): Likewise.
 834         * tui/tui-winsource.c (tui_clear_source_content): Likewise.
 835         (tui_show_source_line): Likewise.
 836         (tui_horizontal_source_scroll): Likewise.
 837         (tui_update_breakpoint_info): Likewise.
 838         (tui_set_exec_info_content): Likewise.
 839         (tui_show_exec_info_content): Likewise.
 840         (tui_alloc_source_buffer): Likewise.
 841         (tui_line_is_displayed): Likewise.
 842         (tui_addr_is_displayed): Likewise.
 843
 844 2015-04-27  John Baldwin  <jhb@FreeBSD.org>
 845
 846         * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
 847         event if PL_FLAG_EXEC is set.
 848         [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
 849         [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
 850         (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
 851         "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
 852         Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
 853
 854 2015-04-27  John Baldwin  <jhb@FreeBSD.org>
 855
 856         * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
 857         [TDP_RFPPWAIT] New variable fbsd_pending_children.
 858         [TDP_RFPPWAIT] (fbsd_remember_child): New function.
 859         [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
 860         [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
 861         [PT_LWPINFO] (fbsd_wait): New function.
 862         [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
 863         [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
 864         [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
 865         [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
 866         [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
 867         [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
 868         [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
 869         [TDP_RFPPWAIT] (fbsd_post_attach): New function.
 870         (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
 871         "fbsd_wait".
 872         [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
 873         Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
 874         Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
 875         Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
 876         Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
 877         Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
 878         Set "to_post_attach" to "fbsd_post_attach".
 879
 880 2015-04-27  John Baldwin  <jhb@FreeBSD.org>
 881
 882         * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
 883         (fbsd_find_memory_regions): Mark static.
 884         (fbsd_nat_add_target): New function.
 885         * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
 886         fbsd_pid_to_exec_file and fbsd_find_memory_regions.
 887         * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
 888         * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
 889         * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
 890         * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
 891
 892 2015-04-27  Gary Benson <gbenson@redhat.com>
 893
 894         * objfiles.c (allocate_objfile): Do not attempt to expand name
 895         if name is a "target:" filename.
 896         * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
 897         to load auto-load scripts for objfiles with "target:" filenames.
 898
 899 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 900
 901         * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
 902         (enum s390_vector_abi_kind): New enum.
 903         (struct gdbarch_tdep)<vector_abi>: New field.
 904         (s390_effective_inner_type): Add parameter min_size.  Stop
 905         unwrapping if the inner type is smaller than min_size.
 906         (s390_function_arg_float): Adjust call to
 907         s390_effective_inner_type.
 908         (s390_function_arg_vector): New function.
 909         (s390_function_arg_integer): Adjust comment.
 910         (struct s390_arg_state)<vr>: New field.
 911         (s390_handle_arg): Add parameter 'is_unnamed'.  Pass vector
 912         arguments according to vector ABI when appropriate.
 913         (s390_push_dummy_call): Initialize the argument state's field
 914         'vr'.  Adjust calls to s390_handle_arg.
 915         (s390_register_return_value): Handle vector return values.
 916         (s390_return_value): Apply the "register" return value convention
 917         to a vector when appropriate.
 918         (s390_gdbarch_init): Initialize tdep->vector_abi.
 919         * NEWS: Announce S390 vector ABI support.
 920
 921 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 922
 923         * s390-linux-tdep.c (s390_return_value_convention): Remove
 924         function.  Inline its logic...
 925         (s390_return_value): ...here.  Instead, move the handling of the
 926         "register" return value convention...
 927         (s390_register_return_value): ...here.  New function.
 928
 929 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 930
 931         * s390-linux-tdep.c
 932         (is_float_singleton): Remove function.  Move the "singleton" part
 933         of the logic...
 934         (s390_effective_inner_type): ...here.  New function.
 935         (is_float_like): Remove function.  Inline its logic...
 936         (s390_function_arg_float): ...here.
 937         (is_pointer_like, is_integer_like, is_struct_like): Remove
 938         functions.  Inline their logic...
 939         (s390_function_arg_integer): ...here.
 940         (s390_function_arg_pass_by_reference): Remove function.
 941         (extend_simple_arg): Remove function.
 942         (alignment_of): Remove function.
 943         (struct s390_arg_state): New structure.
 944         (s390_handle_arg): New function.
 945         (s390_push_dummy_call): Move parameter placement logic to the new
 946         function s390_handle_arg.  Call it for calculating the stack area
 947         sizes first, and again for actually writing the parameters.
 948
 949 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 950
 951         * s390-linux-tdep.c (is_power_of_two): Add comment.  Return
 952           false if the argument is zero.
 953
 954 2015-04-27  Pierre-Marie de Rodat  <derodat@adacore.com>
 955
 956         * ada-lang.c (template_to_static_fixed_type): Return input type
 957         when it is already fixed.  Cache the input type itself when not
 958         creating a static fixed copy.  Make it explicit that we never
 959         molestate the input type.
 960         * gdbtypes.c (resolve_dynamic_struct): Reset the
 961         TYPE_TARGET_TYPE field for resolved copies.
 962
 963 2015-04-27  Joel Brobecker  <brobecker@adacore.com>
 964
 965         * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
 966         (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
 967         (template_to_static_fixed_type): Call ada_check_typedef only
 968         when necessary.
 969
 970 2015-04-24  Andrew Burgess  <andrew.burgess@embecosm.com>
 971
 972         * cli/cli-dump.c (srec_dump_command): Add internationalization
 973         mark ups.
 974         (ihex_dump_command): Likewise.
 975         (tekhex_dump_command): Likewise.
 976         (binary_dump_command): Likewise.
 977         (binary_append_command): Likewise.
 978
 979 2015-04-24  Andrew Burgess  <andrew.burgess@embecosm.com>
 980
 981         * cli/cli-dump.c (verilog_cmdlist): New variable.
 982         (dump_verilog_memory): New function.
 983         (dump_verilog_value): New function.
 984         (verilog_dump_command): New function.
 985         (_initialize_cli_dump): Add new commands to support verilog dump
 986         format.
 987         * NEWS: Add entry for "dump verilog".
 988
 989 2015-04-24  Pierre-Marie de Rodat  <derodat@adacore.com>
 990
 991         * gdbtypes.c (print_gnat_stuff): Do not recurse on the
 992         descriptive type when there is none.
 993
 994 2015-04-23  Patrick Palka  <patrick@parcs.ath.cx>
 995
 996         * tui/tui-win.c (tui_async_resize_screen): Call
 997         rl_resize_terminal().
 998
 999 2015-04-22  Jon Turney  <jon.turney@dronecode.org.uk>
1000
1001         * windows-nat.c (handle_output_debug_string): Don't change
1002         current_event.dwThreadId.
1003         (get_windows_debug_event): Use thread_id, rather than relying on
1004         current_event.dwThreadId being changed.
1005
1006 2015-04-22  Jon Turney  <jon.turney@dronecode.org.uk>
1007
1008         * windows-nat.c (windows_continue): Report an error if
1009         ContinueDebugEvent() fails.
1010
1011 2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>
1012
1013         * windows-nat.c (windows_resume): Fix misspelling in debug output.
1014
1015 2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>
1016
1017         * windows-nat.c (get_windows_debug_event): Replace retval with
1018         thread_id throughout.  Update stale comment.
1019
1020 2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>
1021
1022         * windows-nat.c (get_windows_debug_event): Don't use ternary
1023         conditional operator.
1024
1025 2015-04-21  Pierre Muller  <muller@sourceware.org>
1026
1027         PR pascal/17815
1028         p-exp.y (yylex): Reorganize code to return the matched pattern
1029         for a field of this.
1030
1031 2015-04-21  Gary Benson <gbenson@redhat.com>
1032
1033         * common/fileio.h (fileio_to_host_openflags): New declaration.
1034         * common/fileio.c (fcntl.h): New include.
1035         (fileio_to_host_openflags): New function, factored out from...
1036         * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
1037         Single use updated.
1038
1039 2015-04-21  Kevin Buettner  <kevinb@redhat.com>
1040
1041         * rl78-tdep.c (RL78_SP_ADDR): Define.
1042         (opc_reg_to_gdb_regnum): New static function.
1043         (rl78_analyze_prologue): Recognize instructions forming slightly
1044         more interesting prologues.
1045
1046 2015-04-20  Pierre-Marie de Rodat  <derodat@adacore.com>
1047
1048         Revert:
1049         2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
1050         * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
1051         TYPE_CODE_REF types so that they are not considered as dynamic
1052         depending on the referenced type.
1053         (resolve_dynamic_type_internal): Likewise.
1054
1055 2015-04-20  Pierre-Marie de Rodat  <derodat@adacore.com>
1056
1057         Revert:
1058         2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
1059         * gdbtypes.c (is_dynamic_type_internal): Remove the unused
1060         "top_level" parameter.
1061         (resolve_dynamic_type_internal): Remove the unused "top_level"
1062         parameter.  Update call to is_dynamic_type_internal.
1063         (is_dynamic_type): Update call to is_dynamic_type_internal.
1064         (resolve_dynamic_range): Update call to
1065         resolve_dynamic_type_internal.
1066         (resolve_dynamic_union): Likewise.
1067         (resolve_dynamic_struct): Likewise.
1068         (resolve_dynamic_type): Likewise.
1069
1070 2015-04-19  Gabriel Krisman Bertazi  <gabriel@krisman.be>
1071
1072         * breakpoint.c (update_dprintf_command_list): Remove duplicated
1073         xmalloc.
1074
1075 2015-04-20  Thomas Schwinge  <thomas@codesourcery.com>
1076
1077         * reply_mig_hack.awk: Robustify parsing.
1078
1079         * reply_mig_hack.awk: Don't bother to declare an intermediate
1080         function pointer variable.
1081
1082 2015-04-17  Doug Evans  <dje@google.com>
1083
1084         * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
1085         to "exec_displacement" to avoid confusion with inner use of the name.
1086
1087 2015-04-17  Pedro Alves  <palves@redhat.com>
1088
1089         * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
1090         if HW point of TYPE isn't supported.
1091
1092 2015-04-17  Yao Qi  <yao.qi@linaro.org>
1093             Pedro Alves  <palves@redhat.com>
1094
1095         * target.h (target_can_use_hardware_watchpoint): Update comments.
1096         Remove trailing ";".
1097
1098 2015-04-17  Gary Benson <gbenson@redhat.com>
1099
1100         * remote.c (remote_add_inferior): New argument try_open_exec.
1101         If nonzero, attempt to open the inferior's executable file as
1102         the main executable if no main executable is open already.
1103         All callers updated.
1104         * NEWS: Mention that GDB now supports automatic location and
1105         retrieval of executable + files from remote targets.
1106
1107 2015-04-17  Gary Benson <gbenson@redhat.com>
1108
1109         * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
1110         * remote.c (PACKET_qXfer_exec_file): Likewise.
1111         (remote_protocol_features): Register the
1112         "qXfer:exec-file:read" feature.
1113         (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
1114         (remote_pid_to_exec_file): New function.
1115         (init_remote_ops): Initialize to_pid_to_exec_file.
1116         (_initialize_remote): Register new "set/show remote
1117         pid-to-exec-file-packet" command.
1118         * NEWS: Announce new qXfer:exec-file:read packet.
1119
1120 2015-04-17  Gary Benson <gbenson@redhat.com>
1121
1122         * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
1123         New declaration.
1124         * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
1125         New function, factored out from...
1126         * linux-nat.c (linux_child_pid_to_exec_file): ...here.
1127
1128 2015-04-17  Gary Benson <gbenson@redhat.com>
1129
1130         * exec.c (solist.h): New include.
1131         (exec_file_locate_attach): Prefix absolute executable
1132         paths with gdb_sysroot if set.
1133         * NEWS: Mention that executable paths may be prepended
1134         with sysroot.
1135
1136 2015-04-17  Gary Benson <gbenson@redhat.com>
1137
1138         * solist.h (exec_file_find): New declaration.
1139         * solib.c (solib_find_1): New function, factored out from...
1140         (solib_find): ...here.
1141         (exec_file_find): New function.
1142
1143 2015-04-17  Gary Benson <gbenson@redhat.com>
1144
1145         * gdbcore.h (exec_file_locate_attach): New declaration.
1146         * exec.c (exec_file_locate_attach): New function, factored
1147         out from...
1148         * infcmd.c (attach_command_post_wait): ...here.
1149
1150 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
1151
1152         * MAINTAINERS: Add myself for Blackfin/write-after-approval.
1153
1154 2015-04-16  Yao Qi  <yao.qi@linaro.org>
1155
1156         * infrun.c (maybe_software_singlestep): Declare.
1157         (displaced_step_fixup): Call maybe_software_singlestep.
1158
1159 2015-04-15  Doug Evans  <dje@google.com>
1160
1161         * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
1162
1163 2015-04-15  Doug Evans  <dje@google.com>
1164
1165         * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
1166
1167 2015-04-15  Simon Marchi  <simon.marchi@ericsson.com>
1168
1169         * python/lib/gdb/command/unwinders.py: Add parentheses.
1170
1171 2015-04-15  Yao Qi  <yao.qi@linaro.org>
1172
1173         * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
1174
1175 2015-04-15  Yao Qi  <yao.qi@linaro.org>
1176
1177         * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
1178
1179 2015-04-15  Yao Qi  <yao.qi@linaro.org>
1180
1181         * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
1182         dsc->insn_size instead of 4.
1183
1184 2015-04-14  Gary Benson <gbenson@redhat.com>
1185
1186         * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
1187         * minidebug.c (lzma_stat): Likewise.
1188         * solib-spu.c (spu_bfd_iovec_stat): Likewise.
1189         * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
1190
1191 2015-04-13  Stan Shebs  <stanshebs@google.com>
1192
1193         * MAINTAINERS: Update my email address.
1194
1195 2015-04-13  John Baldwin  <jhb@FreeBSD.org>
1196
1197         * amd64-tdep.c (amd64_target_description): New function.
1198         * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
1199         * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
1200         (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1201         x86 extended save area.
1202         (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1203         * amd64bsd-nat.h: Export amd64bsd_xsave_len.
1204         * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
1205         (_initialize_amd64fbsd_nat): Set "to_read_description" to
1206         "amd64fbsd_read_description".
1207         * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
1208         (amd64fbsd_supply_xstateregset): New function.
1209         (amd64fbsd_collect_xstateregset): New function.
1210         Add "amd64fbsd_xstateregset".
1211         (amd64fbsd_iterate_over_regset_sections): New function.
1212         (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
1213         "I386_FBSD_XSAVE_XCR0_OFFSET".
1214         Add "iterate_over_regset_sections" gdbarch method.
1215         Add "core_read_description" gdbarch method.
1216         * i386-tdep.c (i386_target_description): New function.
1217         * i386-tdep.h: Export i386_target_description and tdesc_i386.
1218         * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
1219         (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1220         x86 extended save area.
1221         (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1222         * i386bsd-nat.h: Export i386bsd_xsave_len.
1223         * i386fbsd-nat.c (i386fbsd_read_description): New function.
1224         (_initialize_i386fbsd_nat): Set "to_read_description" to
1225         "i386fbsd_read_description".
1226         * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
1227         (i386fbsd_core_read_description): New function.
1228         (i386fbsd_supply_xstateregset): New function.
1229         (i386fbsd_collect_xstateregset): New function.
1230         Add "i386fbsd_xstateregset".
1231         (i386fbsd_iterate_over_regset_sections): New function.
1232         (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
1233         "I386_FBSD_XSAVE_XCR0_OFFSET".
1234         Add "iterate_over_regset_sections" gdbarch method.
1235         Add "core_read_description" gdbarch method.
1236         * i386fbsd-tdep.h: New file.
1237
1238 2015-04-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
1239
1240         * NEWS (Changes since GDB 7.9): Add removed -xdb.
1241         * breakpoint.c (command_line_is_silent): Remove xdb_commands
1242         conditional.
1243         (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
1244         and lb.
1245         * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
1246         va.
1247         * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
1248         conditional.
1249         * defs.h (xdb_commands): Remove declaration.
1250         * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
1251         * guile/scm-cmd.c (command_classes): Remove xdb from comment.
1252         * infcmd.c (run_no_args_command, go_command): Remove.
1253         (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
1254         * infrun.c (xdb_handle_command): Remove.
1255         (_initialize_infrun): Remove xdb_commands for lz and z.
1256         * main.c (xdb_commands): Remove variable.
1257         (captured_main): Remove "xdb" from long_options.
1258         (print_gdb_help): Remove --xdb from help.
1259         * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
1260         * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
1261         * stack.c (backtrace_full_command, args_plus_locals_info)
1262         (current_frame_command): Remove.
1263         (_initialize_stack): Remove xdb_commands for t, T and l.
1264         * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
1265         * thread.c (_initialize_thread): Remove xdb_commands condition.
1266         * tui/tui-layout.c (tui_toggle_layout_command)
1267         (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
1268         (_initialize_tui_layout): Remove xdb_commands for td and ts.
1269         * tui/tui-regs.c (tui_scroll_regs_forward_command)
1270         (tui_scroll_regs_backward_command): Remove.
1271         (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
1272         * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
1273         (_initialize_tui_win): Remove xdb_commands for U and w.
1274         * utils.c (pagination_on_command, pagination_off_command): Remove.
1275         (initialize_utils): Remove xdb_commands for am and sm.
1276
1277 2015-04-10  Pedro Alves  <palves@redhat.com>
1278
1279         * infrun.c (displaced_step_fixup): Switch to the event ptid
1280         earlier.  If the thread stopped for a watchpoint and the
1281         target/arch has non-continuable watchpoints, cancel the displaced
1282         step.
1283         (resume): Don't start a displaced step if in-line step-over info
1284         is valid.
1285
1286 2015-04-10  Pedro Alves  <palves@redhat.com>
1287
1288         * infrun.c (displaced_step_in_progress): New function.
1289         (do_target_resume): Advise target to report all signals if
1290         displaced stepping.
1291
1292 2015-04-10  Pedro Alves  <palves@redhat.com>
1293
1294         PR gdb/18216
1295         * infrun.c (process_event_stop_test): Don't assume a step-resume
1296         is set if tp->stepped_breakpoint is true.
1297
1298 2015-04-10  Yao Qi  <yao.qi@linaro.org>
1299
1300         * arm-tdep.c (install_alu_reg): Update comment.
1301         (thumb_copy_alu_reg): Remove local variable rn.  Update
1302         debugging message.  Use r2 instead of r1 in the modified
1303         instruction.
1304
1305 2015-04-10  Pedro Alves  <palves@redhat.com>
1306
1307         PR gdb/13858
1308         * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
1309         linux_displaced_step_location as gdbarch_displaced_step_location
1310         hook.
1311         * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
1312         * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
1313         * linux-tdep.c (linux_displaced_step_location): New function,
1314         based on ppc_linux_displaced_step_location.
1315         * linux-tdep.h (linux_displaced_step_location): New declaration.
1316         * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
1317         (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
1318         Delete.
1319         (ppc_linux_init_abi): Install linux_displaced_step_location as
1320         gdbarch_displaced_step_location hook, even without Cell/B.E..
1321         (_initialize_ppc_linux_tdep): Don't install
1322         ppc_linux_inferior_created as inferior_created observer.
1323         * s390-linux-tdep.c (s390_gdbarch_init): Install
1324         linux_displaced_step_location as gdbarch_displaced_step_location
1325         hook.
1326
1327 2015-04-09  Gary Benson <gbenson@redhat.com>
1328
1329         * common/common-remote-fileio.h: Rename to...
1330         * common/fileio.h: ...this.  Update all references.
1331         (remote_fileio_to_fio_error): Rename to...
1332         (host_to_fileio_error): ...this.
1333         (remote_fileio_to_be): Rename to...
1334         (host_to_bigendian): ...this.  Update all callers.
1335         (remote_fileio_to_fio_uint): Rename to...
1336         (host_to_fileio_uint): ...this.  Update all callers.
1337         (remote_fileio_to_fio_time): Rename to...
1338         (host_to_fileio_time): ...this.  Update all callers.
1339         (remote_fileio_to_fio_stat): Rename to...
1340         (host_to_fileio_stat): ...this.
1341         Update all references.
1342         * common/common-remote-fileio.c: Rename to...
1343         * common/fileio.c: ...this.  Update all references.
1344         (remote_fileio_to_fio_error): Rename to...
1345         (host_to_fileio_error): ...this.  Update all callers.
1346         (remote_fileio_mode_to_target): Rename to...
1347         (fileio_mode_pack): ...this.  Update all callers.
1348         (remote_fileio_to_fio_mode): Rename to...
1349         (host_to_fileio_mode): ...this.  Update all callers.
1350         (remote_fileio_to_fio_ulong): Rename to...
1351         (host_to_fileio_ulong): ...this.  Update all callers.
1352         (remote_fileio_to_fio_stat): Rename to...
1353         (host_to_fileio_stat): ...this.  Update all callers.
1354
1355 2015-04-09  Andy Wingo  <wingo@igalia.com>
1356
1357         * guile/scm-frame.c (gdbscm_frame_read_register): New function.
1358         (frame_functions): Bind gdbscm_frame_read_register to
1359         frame-read-register.
1360         * guile/lib/gdb.scm (frame-read-register): Export.
1361
1362 2015-04-09  Gary Benson <gbenson@redhat.com>
1363
1364         * common/common-remote-fileio.h (remote_fileio_to_fio_error):
1365         New declaration.
1366         * common/common-remote-fileio.c (remote_fileio_to_fio_error):
1367         New function, factored out the named functions below.
1368         * inf-child.c (gdb/fileio.h): Remove include.
1369         (common-remote-fileio.h): New include.
1370         (inf_child_errno_to_fileio_error): Remove function.  Update
1371         all callers to use remote_fileio_to_fio_error.
1372         * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
1373
1374 2015-04-09  Andy Wingo  <wingo@igalia.com>
1375
1376         * MAINTAINERS (Write After Approval): Add Andy Wingo.
1377
1378 2015-04-09  H.J. Lu  <hongjiu.lu@intel.com>
1379
1380         * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
1381         Replace $zlibdir with $ZLIBDIR in LDFLAGS.
1382         * configure: Regenerated.
1383
1384 2015-04-09  Pedro Alves  <palves@redhat.com>
1385
1386         * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
1387         * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
1388         * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
1389         * gnulib/import/Makefile.am: Update.
1390         * gnulib/import/Makefile.in: Update.
1391         * gnulib/import/m4/gnulib-cache.m4: Update.
1392         * gnulib/import/m4/gnulib-comp.m4: Update.
1393         * gnulib/import/m4/strtok_r.m4: New file.
1394         * gnulib/import/strtok_r.c: New file.
1395
1396 2015-04-09  Pedro Alves  <palves@redhat.com>
1397
1398         * gnulib/update-gnulib.sh (aclocal version check): Filter out
1399         "called too early to check prototype".
1400
1401 2015-04-08  Sergio Durigan Junior  <sergiodj@redhat.com>
1402
1403         PR python/16699
1404         * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
1405         use a caching mechanism.  Adjust comments and code to reflect
1406         that.  Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
1407         (cmdpy_completer_handle_brkchars): Adjust call to
1408         cmdpy_completer_helper.  Call Py_XDECREF for 'resultobj'.
1409         (cmdpy_completer): Likewise.
1410
1411 2015-04-08  Yao Qi  <yao.qi@linaro.org>
1412
1413         * spu-tdep.c (spu_gdbarch_init): Don't call
1414         set_gdbarch_cannot_step_breakpoint.
1415
1416 2015-04-07  Sergio Durigan Junior  <sergiodj@redhat.com>
1417
1418         * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
1419
1420 2015-04-07  Pedro Alves  <palves@redhat.com>
1421
1422         * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
1423         (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
1424         (delete_exited_threads): New declaration.
1425         * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
1426         * linux-nat.c (linux_nat_update_thread_list): New function.
1427         (linux_nat_add_target): Install it.
1428         * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
1429         * thread.c (prune_threads): Use ALL_THREADS_SAFE.
1430         (delete_exited_threads): New function.
1431
1432 2015-04-07  Pedro Alves  <pedro@codesourcery.com>
1433
1434         * infrun.c (resume) <displaced stepping debug output>: Get the
1435         leader thread's regcache, not resume_ptid's.
1436
1437 2015-04-06  Doug Evans  <xdje42@gmail.com>
1438
1439         * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
1440         VAR_DOMAIN.
1441         (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
1442         Include symbol domain in debugging output.
1443
1444 2015-04-06  Pedro Alves  <palves@redhat.com>
1445             Bernd Edlinger  <bernd.edlinger@hotmail.de>
1446
1447         * configure.ac: Remove the mingw32-specific stub-termcap.o
1448         fallback, and instead fallback to the stub termcap on all hosts.
1449         * configure: Regenerate.
1450         * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
1451         symbols.
1452
1453 2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
1454
1455         * gdbtypes.c (is_dynamic_type_internal): Remove the unused
1456         "top_level" parameter.
1457         (resolve_dynamic_type_internal): Remove the unused "top_level"
1458         parameter.  Update call to is_dynamic_type_internal.
1459         (is_dynamic_type): Update call to is_dynamic_type_internal.
1460         (resolve_dynamic_range): Update call to
1461         resolve_dynamic_type_internal.
1462         (resolve_dynamic_union): Likewise.
1463         (resolve_dynamic_struct): Likewise.
1464         (resolve_dynamic_type): Likewise.
1465
1466 2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
1467
1468         * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
1469         TYPE_CODE_REF types so that they are not considered as dynamic
1470         depending on the referenced type.
1471         (resolve_dynamic_type_internal): Likewise.
1472
1473 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
1474
1475         * Makefile.in (top_srcdir): New.
1476         * configure: Regenerated.
1477
1478 2015-04-02  Gary Benson <gbenson@redhat.com>
1479
1480         * NEWS: Announce the new default sysroot of "target:".
1481
1482 2015-04-02  Gary Benson <gbenson@redhat.com>
1483
1484         * main.c (captured_main): Set gdb_sysroot to "target:"
1485         if not otherwise set.
1486
1487 2015-04-02  Gary Benson <gbenson@redhat.com>
1488
1489         * exec.c (exec_file_attach): Support "target:" filenames.
1490
1491 2015-04-02  Gary Benson <gbenson@redhat.com>
1492
1493         * solib.c (solib_find): Strip "target:" prefix from sysroot
1494         if accessing local files.
1495
1496 2015-04-02  Gary Benson <gbenson@redhat.com>
1497
1498         * symfile.c (symfile_bfd_open): Reorder to remove duplicated
1499         checks and error messages.
1500
1501 2015-04-02  Gary Benson <gbenson@redhat.com>
1502
1503         * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
1504         (remote_filename_p): Remove declaration.
1505         (remote_bfd_open): Likewise.
1506         * remote.c (remote_bfd_iovec_open): Remove function.
1507         (remote_bfd_iovec_close): Likewise.
1508         (remote_bfd_iovec_pread): Likewise.
1509         (remote_bfd_iovec_stat): Likewise.
1510         (remote_filename_p): Likewise.
1511         (remote_bfd_open): Likewise.
1512         * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
1513         * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
1514         (gdb_bfd_open_maybe_remote): Remove function.
1515         (symfile_bfd_open):  Replace remote filename check with
1516         target filename check.
1517         (reread_symbols): Use gdb_bfd_open.
1518         * build-id.c (gdbcore.h): New include.
1519         (build_id_to_debug_bfd): Use gdb_bfd_open.
1520         * infcmd.c (attach_command_post_wait): Remove remote filename
1521         check.
1522         * solib.c (solib_find): Replace remote-specific handling with
1523         target-specific handling.  Update comments where necessary.
1524         (solib_bfd_open): Replace remote-specific handling with
1525         target-specific handling.
1526         (gdb_sysroot_changed): New function.
1527         (_initialize_solib): Call the above when gdb_sysroot changes.
1528         * windows-tdep.c (gdbcore.h): New include.
1529         (windows_xfer_shared_library): Use gdb_bfd_open.
1530
1531 2015-04-02  Gary Benson <gbenson@redhat.com>
1532
1533         * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
1534         (is_target_filename): New declaration.
1535         (gdb_bfd_has_target_filename): Likewise.
1536         (gdb_bfd_open): Update documentation comment.
1537         * gdb_bfd.c (target.h): New include.
1538         (gdb/fileio.h): Likewise.
1539         (is_target_filename): New function.
1540         (gdb_bfd_has_target_filename): Likewise.
1541         (fileio_errno_to_host): Likewise.
1542         (gdb_bfd_iovec_fileio_open): Likewise.
1543         (gdb_bfd_iovec_fileio_pread): Likewise.
1544         (gdb_bfd_iovec_fileio_close): Likewise.
1545         (gdb_bfd_iovec_fileio_fstat): Likewise.
1546         (gdb_bfd_open): Use target fileio to access paths prefixed
1547         with "target:" where necessary.
1548
1549 2015-04-02  Gary Benson <gbenson@redhat.com>
1550
1551         * target.h (struct target_ops) <to_filesystem_is_local>:
1552         New field.
1553         (target_filesystem_is_local): New macro.
1554         * target-delegates.c: Regenerate.
1555         * remote.c (remote_filesystem_is_local): New function.
1556         (init_remote_ops): Initialize to_filesystem_is_local.
1557
1558 2015-04-02  Gary Benson <gbenson@redhat.com>
1559
1560         * target.h (struct target_ops) <to_fileio_fstat>: New field.
1561         (target_fileio_fstat): New declaration.
1562         * target.c (target_fileio_fstat): New function.
1563         * inf-child.c (inf_child_fileio_fstat): Likewise.
1564         (inf_child_target): Initialize to_fileio_fstat.
1565         * remote.c (init_remote_ops): Likewise.
1566
1567 2015-04-01  Sasha Smundak  <asmundak@google.com>
1568
1569         * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
1570         (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
1571         (py-unwind.o): New recipe.
1572         * NEWS: mention Python frame unwinding.
1573         * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
1574         gdb/unwinder.py and gdb/command/unwinder.py
1575         * python/lib/gdb/__init__.py (packages): Add frame_unwinders
1576         list.
1577         (execute_unwinders): New function.
1578         * python/lib/gdb/command/unwinders.py: New file.
1579         * python/lib/gdb/unwinder.py: New file.
1580         * python/py-objfile.c (objfile_object): Add frame_unwinders field.
1581         (objfpy_dealloc): Decrement frame_unwinders reference count.
1582         (objfpy_initialize): Create frame_unwinders list.
1583         (objfpy_get_frame_unwinders): New function.
1584         (objfpy_set_frame_unwinders): Ditto.
1585         (objfile_getset): Add frame_unwinders attribute to Objfile.
1586         * python/py-progspace.c (pspace_object): Add frame_unwinders field.
1587         (pspy_dealloc): Decrement frame_unwinders reference count.
1588         (pspy_initialize): Create frame_unwinders list.
1589         (pspy_get_frame_unwinders): New function.
1590         (pspy_set_frame_unwinders): Ditto.
1591         (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
1592         * python/py-unwind.c: New file.
1593         * python/python-internal.h (pspy_get_name_unwinders): New prototype.
1594         (objpy_get_frame_unwinders): New prototype.
1595         (gdbpy_initialize_unwind): New prototype.
1596         * python/python.c (gdbpy_apply_type_printers): Call
1597         gdbpy_initialize_unwind.
1598
1599 2015-04-01  Pedro Alves  <palves@redhat.com>
1600
1601         * infrun.c (resume): Check currently_stepping after clearing
1602         stepped_breakpoint, not before.
1603
1604 2015-04-01  Pedro Alves  <palves@redhat.com>
1605
1606         * infrun.c (print_target_wait_results): Print all the ptid
1607         elements.
1608
1609 2015-04-01  Pedro Alves  <palves@redhat.com>
1610
1611         * infrun.c (keep_going): Also discard cleanups if inserting
1612         breakpoints fails.
1613
1614 2015-04-01  Pedro Alves  <palves@redhat.com>
1615
1616         * infrun.c (wait_for_inferior): Install the
1617         finish_thread_state_cleanup cleanup across the whole function, not
1618         just around handle_inferior_event.
1619
1620 2015-04-01  Pedro Alves  <palves@redhat.com>
1621
1622         * infrun.c (resume) <step past permanent breakpoint>: Use
1623         do_target_resume.
1624
1625 2015-04-01  Pedro Alves  <palves@redhat.com>
1626
1627         * linux-nat.c (linux_handle_extended_wait): Always call set_running.
1628
1629 2015-04-01  Pierre-Marie de Rodat  <derodat@adacore.com>
1630
1631         * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
1632
1633 2015-04-01  Pedro Alves  <palves@redhat.com>
1634
1635         * linux-thread-db.c (record_thread): Readd the thread to gdb's
1636         list if it was marked exited.
1637
1638 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
1639
1640         * configure: Regenerated.
1641
1642 2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>
1643             Jan Kratochvil  <jan.kratochvil@redhat.com>
1644             Oleg Nesterov  <oleg@redhat.com>
1645
1646         PR corefiles/16092
1647         * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
1648         New enum identifying the various options of the coredump_filter
1649         file.
1650         (struct smaps_vmflags): New struct.
1651         (use_coredump_filter): New variable.
1652         (decode_vmflags): New function.
1653         (mapping_is_anonymous_p): Likewise.
1654         (dump_mapping_p): Likewise.
1655         (linux_find_memory_regions_full): New variables
1656         'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
1657         Removed variable 'modified'.  Read /proc/<PID>/smaps file; improve
1658         parsing of its information.  Implement memory mapping filtering
1659         based on its contents.
1660         (show_use_coredump_filter): New function.
1661         (_initialize_linux_tdep): New command 'set use-coredump-filter'.
1662         * NEWS: Mention the possibility of using the
1663         '/proc/PID/coredump_filter' file when generating a corefile.
1664         Mention new command 'set use-coredump-filter'.
1665
1666 2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>
1667
1668         * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
1669         read_memory_unsigned_integer.
1670
1671 2015-03-31  H.J. Lu  <hongjiu.lu@intel.com>
1672
1673         * Makefile.in (ZLIB): New.
1674         (ZLIBINC): Likewise.
1675         (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
1676         (CLIBS): Add $(ZLIB).
1677         * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
1678         Add -lz to LIBS.
1679         * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
1680         * top.c (print_gdb_configuration): Remove --with-zlib and
1681         --without-zlib.
1682         * config.in: Regenerated.
1683         * configure: Likewise.
1684
1685 2015-03-31  Antoine Tremblay  <antoine.tremblay@ericsson.com>
1686
1687         * NEWS: Mention info os cpus support.
1688         * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
1689         (struct osdata_type): Add cpus entry, reorder the entries in
1690         alphabetical order.
1691
1692 2015-03-31  Matthias Klose  <doko@ubuntu.com>
1693
1694         * compile/compile.c (compile_to_object): Allow triplets with or
1695         without vendor set.
1696
1697 2015-03-30  Doug Evans  <dje@google.com>
1698
1699         PR c++/18141
1700         * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
1701         klass in VAR_DOMAIN.
1702
1703 2015-03-30  Gary Benson <gbenson@redhat.com>
1704
1705         * remote.c (remote_mourn_1): Remove function.  Update all callers
1706         to use remote_mourn.
1707         (extended_remote_mourn_1): Remove function.  Update all callers
1708         to use extended_remote_mourn.
1709         (extended_remote_attach_1): Remove function.  Update all callers
1710         to use extended_remote_attach.
1711
1712 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
1713
1714         * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
1715         (HFILES_NO_SRCDIR): Add ft32-tdep.h.
1716         (ALLDEPFILES): Add ft32-tdep.c.
1717         * configure.tgt: Add FT32 entry.
1718         * ft32-tdep.c: New file, FT32 target-dependent code.
1719         * ft32-tdep.h: New file, FT32 target-dependent code.
1720
1721 2015-03-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
1722
1723         Revert:
1724         2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
1725         Code cleanup.
1726         * printcmd.c (print_command_1): Move expr variable scope.
1727
1728 2015-03-27  Joel Brobecker  <brobecker@adacore.com>
1729
1730         * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
1731
1732 2015-03-27  Andrzej Kaczmarek  <andrzej.kaczmarek@tieto.com>
1733
1734         * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
1735         sections.
1736
1737 2015-03-26  Joel Brobecker  <brobecker@adacore.com>
1738
1739         * dtrace-probe.c (dtrace_process_dof_probe): Contain any
1740         exception raised while parsing the probe arguments.
1741         Force parsing to be done using the C language parser.
1742         * expression.h (parse_expression_with_language): Declare.
1743         * parse.c (parse_expression_with_language): New function.
1744
1745 2015-03-26  Jon Turney  <jon.turney@dronecode.org.uk>
1746
1747         * MAINTAINERS (Write After Approval): Add "Jon Turney".
1748
1749 2015-03-26  Andy Wingo  <wingo@igalia.com>
1750
1751         PR symtab/18148
1752         * dwarf2read.c (struct partial_die_info): Add has_const_value
1753         member.
1754         (add_partial_symbol): Don't punt on symbols that have const_value
1755         attributes.
1756         (read_partial_die): Detect DW_AT_const_value.
1757
1758 2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
1759
1760         Code cleanup.
1761         * printcmd.c (print_command_1): Move expr variable scope.
1762
1763 2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
1764
1765         Code cleanup.
1766         * printcmd.c (validate_format): Make the parameter cmdname const.
1767
1768 2015-03-26  Don Breazeal  <donb@codesourcery.com>
1769
1770         * remote.c (_initialize_remote): Update comment.
1771
1772 2015-03-26  Pedro Alves  <palves@redhat.com>
1773             Jon TURNEY  <jon.turney@dronecode.org.uk>
1774
1775         * coffread.c (coff_symfile_read): When constructing the name of an
1776         import stub symbol from import symbol for amd64, only skip the
1777         char after _imp_ if the target is underscored (like i386) and the
1778         char is indeed the target's leading char.
1779
1780 2015-03-25  Pedro Alves  <palves@redhat.com>
1781
1782         * target.h <to_async>: Replace 'callback' and 'context' parameters
1783         with boolean 'enable' parameter.
1784         (target_async): Replace CALLBACK and CONTEXT parameters with
1785         boolean ENABLE parameter.
1786         * inf-loop.c (inferior_event_handler): Adjust.
1787         * linux-nat.c (linux_nat_attach, linux_nat_resume)
1788         (linux_nat_resume): Adjust.
1789         (async_client_callback, async_client_context): Delete.
1790         (handle_target_event): Call inferior_event_handler directly.
1791         (linux_nat_async): Replace 'callback' and 'context' parameters
1792         with boolean 'enable' parameter.  Adjust.  Remove references to
1793         async_client_callback and async_client_context.
1794         (linux_nat_close): Adjust.
1795         * record-btrace.c (record_btrace_async): Replace 'callback' and
1796         'context' parameters with boolean 'enable' parameter.  Adjust.
1797         (record_btrace_resume): Adjust.
1798         * record-full.c (record_full_async): Replace 'callback' and
1799         'context' parameters with boolean 'enable' parameter.  Adjust.
1800         (record_full_resume, record_full_core_resume): Adjust.
1801         * remote.c (struct remote_state) <async_client_callback,
1802         async_client_context>: Delete fields.
1803         (remote_start_remote, extended_remote_attach_1, remote_resume)
1804         (extended_remote_create_inferior): Adjust.
1805         (remote_async_serial_handler): Call inferior_event_handler
1806         directly.
1807         (remote_async): Replace 'callback' and 'context' parameters with
1808         boolean 'enable' parameter.  Adjust.
1809         * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
1810         Adjust.
1811         * target-delegates.c: Regenerate.
1812
1813 2015-03-25  Gary Benson <gbenson@redhat.com>
1814             Pedro Alves  <palves@redhat.com>
1815
1816         * target.c (fileio_ft_t): New typedef, define object vector.
1817         (fileio_fhandles): New static variable.
1818         (is_closed_fileio_fh): New macro.
1819         (lowest_closed_fd): New static variable.
1820         (acquire_fileio_fd): New function.
1821         (release_fileio_fd): Likewise.
1822         (fileio_fd_to_fh): New macro.
1823         (target_fileio_open): Wrap the file descriptor on success.
1824         (target_fileio_pwrite): Updated to use wrapped file descriptor.
1825         (target_fileio_pread): Likewise.
1826         (target_fileio_close): Likewise.
1827
1828 2015-03-24  Pedro Alves  <palves@redhat.com>
1829
1830         * thread.c (thread_apply_all_command): Take exited threads into
1831         account.
1832
1833 2015-03-24  Pedro Alves  <palves@redhat.com>
1834
1835         * infrun.c (resume, proceed): Mention
1836         switch_back_to_stepped_thread, not switch_back_to_stepping.
1837
1838 2015-03-24  Pedro Alves  <palves@redhat.com>
1839
1840         * infrun.c (user_visible_resume_ptid): Rewrite going from
1841         most-locked to unlocked instead of the opposite.  Move comment ...
1842         * infrun.h (user_visible_resume_ptid): ... here.
1843
1844 2015-03-24  Pedro Alves  <palves@redhat.com>
1845
1846         * linux-nat.c (linux_nat_resume): Output debug logs before trying
1847         to resume the event lwp.  Use the lwp's ptid instead of the passed
1848         in (maybe wildcard) ptid.
1849         (stop_wait_callback): Tweak debug log output.
1850         (check_stopped_by_breakpoint): Tweak debug log output.  Also dump
1851         TRAP_TRACE.
1852         (linux_nat_filter_event): In debug output, distinguish a
1853         resume_stop SIGSTOP from a delayed SIGSTOP.  Output debug logs
1854         before trying to resume the lwp.
1855
1856 2015-03-24  Joel Brobecker  <brobecker@adacore.com>
1857
1858         * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
1859         pointer indirection.
1860         * gdbtypes.c (get_dyn_prop): Adjust, following change above.
1861         (add_dyn_prop, copy_dynamic_prop_list): Likewise.
1862
1863 2015-03-24  Joel Brobecker  <brobecker@adacore.com>
1864
1865         * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
1866         Renames DYN_ATTR_DATA_LOCATION.
1867         (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
1868         DYN_ATTR_DATA_LOCATION.
1869         * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
1870         instead of DYN_ATTR_DATA_LOCATION.
1871
1872 2015-03-24  Pedro Alves  <palves@redhat.com>
1873
1874         * breakpoint.c (until_break_command): Adjust call to proceed.
1875         * gdbthread.h (struct thread_control_state) <stepping_command>:
1876         New field.
1877         * infcall.c (run_inferior_call): Adjust call to proceed.
1878         * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
1879         Adjust calls to proceed.
1880         (set_step_frame): Set the current thread's step_start_function
1881         here.
1882         (step_once): Adjust calls to proceed.
1883         (jump_command, signal_command, until_next_command)
1884         (finish_backward, finish_forward, proceed_after_attach_callback)
1885         (attach_command_post_wait): Adjust calls to proceed.
1886         * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
1887         (do_target_resume): New function, factored out from ...
1888         (resume): ... here.  Remove 'step' parameter.  Instead, check
1889         currently_stepping to determine whether the thread should be
1890         single-stepped.
1891         (proceed): Remove 'step' parameter and don't set the thread's
1892         step_start_function here.  Adjust call to 'resume'.
1893         (handle_inferior_event): Adjust calls to 'resume'.
1894         (switch_back_to_stepped_thread): Use do_target_resume instead of
1895         'resume'.
1896         (keep_going): Adjust calls to 'resume'.
1897         * infrun.h (proceed): Remove 'step' parameter.
1898         (resume): Likewise.
1899         * windows-nat.c (do_initial_windows_stuff): Adjust call to
1900         'resume'.
1901         * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
1902
1903 2015-03-24  Pedro Alves  <palves@redhat.com>
1904
1905         * gdbthread.h (struct thread_control_state) <stepping_command>:
1906         New field.
1907         * infcmd.c (step_once): Pass step=1 to clear_proceed_status.  Set
1908         the thread's stepping_command field.
1909         * infrun.c (resume): Check the thread's stepping_command flag to
1910         determine which threads should be resumed.  Rename 'entry_step'
1911         local to user_step.
1912         (clear_proceed_status_thread): Clear 'stepping_command'.
1913         (schedlock_applies): Change parameter type to struct thread_info
1914         pointer.  Adjust.
1915         (find_thread_needs_step_over): Remove 'step' parameter.  Adjust.
1916         (switch_back_to_stepped_thread): Adjust calls to
1917         'schedlock_applies'.
1918         (_initialize_infrun): Adjust "set scheduler-locking step" help.
1919
1920 2015-03-24  Pedro Alves  <palves@redhat.com>
1921
1922         * infrun.c (step_start_function): Delete and ...
1923         * gdbthread.h (struct thread_control_state) <step_start_function>:
1924         ... now a field here.
1925         * infrun.c (clear_proceed_status_thread): Clear the thread's
1926         step_start_function.
1927         (proceed, process_event_stop_test, print_stop_event): Adjust.
1928
1929 2015-03-24  Pedro Alves  <palves@redhat.com>
1930
1931         * infrun.c (proceed): No longer handle negative step.
1932
1933 2015-03-24  Gary Benson  <gbenson@redhat.com>
1934
1935         * nat/x86-linux.h (x86_linux_new_thread): New declaration.
1936         (x86_linux_prepare_to_resume): Likewise.
1937         * x86-linux-nat.c (x86_linux_new_thread):
1938         Moved to nat/x86-linux.c.
1939         (x86_linux_prepare_to_resume): Likewise.
1940         * nat/x86-linux.c (x86_linux_new_thread): New function.
1941         (x86_linux_prepare_to_resume): Likewise.
1942
1943 2015-03-24  Gary Benson  <gbenson@redhat.com>
1944
1945         * nat/x86-linux-dregs.h: New file.
1946         * nat/x86-linux-dregs.c: Likewise.
1947         * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
1948         (x86-linux-dregs.o): New rule.
1949         * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
1950         * config/i386/linux64.mh (NATDEPFILES): Likewise.
1951         * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
1952         (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
1953         (x86_linux_dr_get): Likewise.
1954         (x86_linux_dr_set): Likewise.
1955         (x86_linux_dr_get_addr): Likewise.
1956         (x86_linux_dr_get_control): Likewise.
1957         (x86_linux_dr_get_status): Likewise.
1958         (update_debug_registers_callback): Likewise.
1959         (x86_linux_dr_set_control): Likewise.
1960         (x86_linux_dr_set_addr): Likewise.
1961         (x86_linux_update_debug_registers): Likewise.
1962
1963 2015-03-24  Gary Benson  <gbenson@redhat.com>
1964
1965         * x86-linux-nat.c (x86_linux_update_debug_registers):
1966         New function, factored out from...
1967         (x86_linux_prepare_to_resume): ...this.
1968
1969 2015-03-24  Gary Benson  <gbenson@redhat.com>
1970
1971         * x86-linux-nat.c (x86_linux_dr_get): Update comments.
1972         (x86_linux_dr_set): Likewise.
1973         (x86_linux_dr_get_addr): Likewise.
1974         (x86_linux_dr_get_control): Likewise.
1975         (x86_linux_dr_get_status): Likewise.
1976         (update_debug_registers_callback): Likewise.
1977         (x86_linux_dr_set_control): Likewise.
1978         (x86_linux_dr_set_addr): Likewise.
1979         (x86_linux_prepare_to_resume): Likewise.
1980         (x86_linux_new_thread): Likewise.
1981
1982 2015-03-24  Gary Benson  <gbenson@redhat.com>
1983
1984         * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
1985         (x86_linux_new_thread): Rename argument.
1986
1987 2015-03-24  Gary Benson  <gbenson@redhat.com>
1988
1989         * nat/x86-linux.h: New file.
1990         * nat/x86-linux.c: Likewise.
1991         * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
1992         (x86-linux.o): New rule.
1993         * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
1994         * config/i386/linux64.mh (NATDEPFILES): Likewise.
1995         * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
1996         (lwp_set_arch_private_info): New declaration.
1997         (lwp_arch_private_info): Likewise.
1998         * linux-nat.c (lwp_set_arch_private_info): New function.
1999         (lwp_arch_private_info): Likewise.
2000         * x86-linux-nat.c: Include nat/x86-linux.h.
2001         (arch_lwp_info): Removed structure.
2002         (update_debug_registers_callback):
2003         Use lwp_set_debug_registers_changed.
2004         (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
2005         and lwp_set_debug_registers_changed.
2006         (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2007
2008 2015-03-24  Gary Benson  <gbenson@redhat.com>
2009
2010         * nat/linux-nat.h (ptid_of_lwp): New declaration.
2011         (lwp_is_stopped): Likewise.
2012         (lwp_stop_reason): Likewise.
2013         * linux-nat.c (ptid_of_lwp): New function.
2014         (lwp_is_stopped): Likewise.
2015         (lwp_is_stopped_by_watchpoint): Likewise.
2016         * x86-linux-nat.c (update_debug_registers_callback):
2017         Use lwp_is_stopped.
2018         (x86_linux_prepare_to_resume): Use ptid_of_lwp and
2019         lwp_stop_reason.
2020
2021 2015-03-24  Gary Benson  <gbenson@redhat.com>
2022
2023         * linux-nat.h (linux_stop_lwp): Move declaration to...
2024         * nat/linux-nat.h (linux_stop_lwp): New declaration.
2025
2026 2015-03-24  Gary Benson  <gbenson@redhat.com>
2027
2028         * linux-nat.h: Include nat/linux-nat.h.
2029         (iterate_over_lwps): Move declaration to nat/linux-nat.h.
2030         * nat/linux-nat.h (struct lwp_info): New forward declaration.
2031         (iterate_over_lwps_ftype): New typedef.
2032         (iterate_over_lwps): New declaration.
2033         * linux-nat.h (iterate_over_lwps): Update comment.  Use
2034         iterate_over_lwps_ftype.  Update callback return value check.
2035
2036 2015-03-24  Gary Benson  <gbenson@redhat.com>
2037
2038         * x86-nat.h (x86_debug_reg_state): Move declaration to...
2039         * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
2040
2041 2015-03-24  Gary Benson  <gbenson@redhat.com>
2042
2043         * nat/linux-nat.h (current_lwp_ptid): New declaration.
2044         * linux-nat.c (current_lwp_ptid): New function.
2045         * x86-linux-nat.c: Include nat/linux-nat.h.
2046         (x86_linux_dr_get_addr): Use current_lwp_ptid.
2047         (x86_linux_dr_get_control): Likewise.
2048         (x86_linux_dr_get_status): Likewise.
2049         (x86_linux_dr_set_control): Likewise.
2050         (x86_linux_dr_set_addr): Likewise.
2051
2052 2015-03-24  Antoine Tremblay  <antoine.tremblay@ericsson.com>
2053
2054         PR breakpoints/16466
2055         * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
2056
2057 2015-03-23  Joel Brobecker  <brobecker@adacore.com>
2058
2059         * ser-mingw.c (ser_windows_setparity): Fix indentation.
2060         * ser-unix.c (hardwire_setparity): Likewise.
2061
2062 2015-03-23  Yurij Grechishhev  <yurij.grechishhev@gmail.com>
2063
2064         * NEWS: Mention set/show serial parity command.
2065         * monitor.c (monitor_open): Call serial_setparity.
2066         * remote.c (remote_open_1): Likewise.
2067         * ser-base.c (ser_base_serparity): New function.
2068         * ser-base.h (ser_base_setparity): Add  declaration.
2069         * ser-go32.c (dos_ops): Set "setparity" field.
2070         * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
2071         state.Parity.
2072         (ser_windows_setparity): New function.
2073         (hardwire_ops): Add ser_windows_setparity.
2074         (tty_ops): Add NULL for setparity field.
2075         (pipe_ops): Add ser_base_setparity.
2076         (tcp_ops): Likewise.
2077         * ser-pipe.c (pipe_ops): Likewise.
2078         * ser-tcp.c (tcp_ops): Likewise.
2079         * ser-unix.c (hardwire_setparity): Add declaration.
2080         (hardwire_raw): Don't reset PARENB flag.
2081         (hardwire_setparity): New function.
2082         (hardwire_ops): Add hardwire_setparity.
2083         * serial.c (serial_setparity): New function.
2084         (serial_parity): New global.
2085         (parity_none, parity_odd, parity_even, parity_enums, parity):
2086         New static globals.
2087         (set_parity): New function.
2088         (_initialize_serial): Add set/show serial parity commands.
2089         * serial.h (GDBPARITY_NONE): Define.
2090         (GDBPARITY_ODD): Define.
2091         (GDBPARITY_EVEN): Define.
2092         (serial_setparity) Add declaration.
2093         (struct serial_ops): Add setparity field.
2094         * target.h (serial_parity): Add declaration.
2095
2096 2015-03-23  Keith Seitz  <keiths@redhat.com>
2097
2098         * linespec.c (linespec_lexer_lex_keyword): Update comment.
2099
2100 2015-03-23  Keith Seitz  <keiths@redhat.com>
2101
2102         * breakpoint.c (parse_breakpoint_sals): Use
2103         linespec_lexer_lex_keyword to ascertain if the user specified
2104         a NULL location.
2105         * linespec.c [IF_KEYWORD_INDEX]: Define.
2106         (linespec_lexer_lex_keyword): Export.
2107         (struct ls_parser) <keyword_ok>: Remove.
2108         A keyword is only a keyword if not followed by another keyword.
2109         (linespec_lexer_lex_one): Remove keyword_ok handling.
2110         Add comment explaining why the parsing stream is not advanced
2111         when a keyword is seen.
2112         (parse_linespec): Remove parser->keyword_ok.
2113         * linespec.h (linespec_lexer_lex_keyword): Add declaration.
2114
2115 2015-03-23  Keith Seitz  <keiths@redhat.com>
2116
2117         PR gdb/18021
2118         * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
2119         if we find a static method with DW_AT_vtable_elem_location.
2120
2121 2015-03-21  Eli Zaretskii  <eliz@gnu.org>
2122
2123         * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
2124         before the second loop, to avoid undefined behavior.  Reported by
2125         Anton Blanchard <anton@samba.org>.
2126
2127 2015-03-20  Keven Boell  <keven.boell@intel.com>
2128
2129         * gdbtypes.c (resolve_dynamic_type_internal): Adapt
2130         data_location usage to linked list.
2131         (resolve_dynamic_type_internal): Adapt data_location to
2132         linked list.
2133         (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
2134         (copy_type_recursive, copy_type): Add copy of linked list.
2135         * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
2136         (struct dynamic_prop_list): New struct.
2137         * dwarf2read.c (set_die_type): Set data_location data.
2138
2139 2015-03-20  Pedro Alves  <palves@redhat.com>
2140
2141         * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
2142         inner block and make it const.
2143         * machoread.c (get_archive_prefix_len): Make "lparen" const.
2144
2145 2015-03-20  Pedro Alves  <palves@redhat.com>
2146
2147         * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
2148         * breakpoint.h (set_breakpoint_condition): Update declaration.
2149
2150 2015-03-20  Pedro Alves  <palves@redhat.com>
2151
2152         * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
2153
2154 2015-03-20  Pedro Alves  <palves@redhat.com>
2155
2156         * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
2157
2158 2015-03-20  Pedro Alves  <palves@redhat.com>
2159
2160         * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
2161
2162 2015-03-20  Pedro Alves  <palves@redhat.com>
2163
2164         * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
2165         (nto_init_solib_absolute_prefix): Likewise.
2166
2167 2015-03-20  Pedro Alves  <palves@redhat.com>
2168
2169         * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
2170         * spu-tdep.c (spu_gdbarch_init): Make "name" const.
2171
2172 2015-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>
2173
2174         * config/djgpp/README: Remove gdb.hp.
2175
2176 2015-03-20  Yao Qi  <yao.qi@linaro.org>
2177
2178         * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
2179         set_gdbarch_cannot_step_breakpoint.
2180
2181 2015-03-19  Pedro Alves  <palves@redhat.com>
2182
2183         * linux-nat.c (linux_resume_one_lwp): Rename to ...
2184         (linux_resume_one_lwp_throw): ... this.  Don't handle ESRCH here,
2185         instead call perror_with_name.
2186         (check_ptrace_stopped_lwp_gone): New function.
2187         (linux_resume_one_lwp): Reimplement as wrapper around
2188         linux_resume_one_lwp_throw that swallows errors if the LWP is
2189         gone.
2190         (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
2191         swallows errors if the LWP is gone.  Use
2192         linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
2193
2194 2015-03-19  Pedro Alves  <palves@redhat.com>
2195
2196         * linux-nat.c (status_callback): Return early if the LWP has no
2197         status pending.
2198
2199 2015-03-19  Pedro Alves  <palves@redhat.com>
2200
2201         * linux-nat.c (select_event_lwp_callback): Update comment to no
2202         longer mention SIGTRAP.
2203
2204 2015-03-18  Tristan Gingold  <gingold@adacore.com>
2205
2206         * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
2207         redirection code to ...
2208         (amd64_windows_frame_decode_insns): ... Here.  Fix in prologue
2209         checks.  Fix SAVE_NONVOL operations.  Add debug code and comments.
2210
2211 2015-03-18  Gary Benson <gbenson@redhat.com>
2212
2213         (remote_protocol_features): Remove the "vFile:fstat" feature.
2214         (remote_hostio_fstat): Probe for "vFile:fstat" support.
2215
2216 2015-03-11  Yao Qi  <yao.qi@linaro.org>
2217
2218         PR tdep/18107
2219         * aarch64-linux-tdep.c: Include xml-syscall.h
2220         (aarch64_linux_get_syscall_number): New function.
2221         (aarch64_linux_init_abi): Call
2222         set_gdbarch_get_syscall_number.
2223         * syscalls/aarch64-linux.xml: New file.
2224
2225 2015-03-17  Yurij Grechishhev  <yurij.grechishhev@gmail.com>
2226
2227         * ser-base.h (ser_base_setstopbits): Change second argument name
2228         from "rate" to "num".
2229
2230 2015-03-17  Gary Benson <gbenson@redhat.com>
2231             Luke Allardyce <lukeallardyce@gmail.com>
2232
2233         PR gdb/18131
2234         * common/common-remote-fileio.h (sys/stat.h): New include.
2235         (stuct stat): Remove forward declaration.
2236
2237 2015-03-16  John Baldwin  <jhb@FreeBSD.org>
2238
2239         * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
2240         before writing core register notes.
2241
2242 2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
2243             Pedro Alves  <palves@redhat.com>
2244
2245         * gdb_curses.h (tgetnum): Mark with EXTERN_C.
2246         * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
2247         (tgoto): Wrap with extern "C".
2248
2249 2015-03-16  Pedro Alves  <palves@redhat.com>
2250             Yuanhui Zhang  <asmwarrior@gmail.com>
2251
2252         * stub-termcap.c (tputs): Change prototype.
2253
2254 2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
2255             Pedro Alves  <palves@redhat.com>
2256
2257         * windows-nat.c (struct thread_info_struct): Rename to ...
2258         (struct windows_thread_info_struct): ... this.
2259         (thread_info): Rename to ...
2260         (windows_thread_info): ... this.
2261         All users updated.
2262
2263 2015-03-14  Jan Kratochvil  <jan.kratochvil@redhat.com>
2264             Pedro Alves  <palves@redhat.com>
2265
2266         * NEWS: New Removed targets and native configurations.
2267
2268 2015-03-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
2269
2270         Remove HPUX.
2271         * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
2272         (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
2273         (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
2274         ia64-hpux-tdep.h, solib-ia64-hpux.h.
2275         (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
2276         ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
2277         * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
2278         hppa-hpux-tdep.c.
2279         * config/ia64/hpux.mh: Remove file.
2280         * config/pa/hpux.mh: Remove file.
2281         * configure: Rebuilt.
2282         * configure.ac (dlgetmodinfo, somread.o): Remove.
2283         * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
2284         (ia64-*-hpux*): Remove its float format exception.
2285         * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
2286         * hppa-hpux-nat.c: Remove file.
2287         * hppa-hpux-tdep.c: Remove file.
2288         * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
2289         Move them here from hppa-tdep.h
2290         (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
2291         (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
2292         * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
2293         Move them to hppa-tdep.c.
2294         (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
2295         declarations.
2296         * ia64-hpux-nat.c: Remove file.
2297         * ia64-hpux-tdep.c: Remove file.
2298         * ia64-hpux-tdep.h: Remove file.
2299         * inf-ttrace.c: Remove file.
2300         * inf-ttrace.h: Remove file.
2301         * solib-ia64-hpux.c: Remove file.
2302         * solib-ia64-hpux.h: Remove file.
2303         * solib-pa64.c: Remove file.
2304         * solib-pa64.h: Remove file.
2305         * solib-som.c: Remove file.
2306         * solib-som.h: Remove file.
2307         * somread.c: Remove file.
2308
2309 2015-03-13  John Baldwin  <jhb@FreeBSD.org>
2310
2311         * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
2312         * config.in: Regenerate.
2313         * configure: Regenerate.
2314         * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
2315         define.
2316         (fbsd_find_memory_regions): Use kinfo_getvmmap to
2317         enumerate memory regions if present.
2318
2319 2015-03-13  John Baldwin  <jhb@FreeBSD.org>
2320
2321         * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
2322         * i386fbsd-tdep.c: Fix style in various gdb_static_assert
2323         expressions.
2324         (i386fbsd_sigtramp_p): Likewise.
2325
2326 2015-03-12  John Baldwin  <jhb@FreeBSD.org>
2327
2328         * MAINTAINERS (Write After Approval): Add John Baldwin.
2329
2330 2015-03-12  Gary Benson <gbenson@redhat.com>
2331
2332         * solib.c (_initialize_solib): Make "set/show sysroot" use
2333         add_setshow_optional_filename_cmd so it can be restored to
2334         empty after being set.
2335
2336 2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>
2337
2338         * Makefile.in (SFILES): New source break-catch-syscall.c.
2339         (COMMON_OBS): New object break-catch-syscall.o.
2340         * break-catch-syscall.c: New file.
2341         * breakpoint.c: Remove inclusion of "xml-syscall.h".
2342         (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
2343         (struct syscall_catchpoint): Likewise.
2344         (dtor_catch_syscall): Likewise.
2345         (catch_syscall_inferior_data): Likewise.
2346         (struct catch_syscall_inferior_data): Likewise.
2347         (get_catch_syscall_inferior_data): Likewise.
2348         (catch_syscall_inferior_data_cleanup): Likewise.
2349         (insert_catch_syscall): Likewise.
2350         (remove_catch_syscall): Likewise.
2351         (breakpoint_hit_catch_syscall): Likewise.
2352         (print_it_catch_syscall): Likewise.
2353         (print_one_catch_syscall): Likewise.
2354         (print_mention_catch_syscall): Likewise.
2355         (print_recreate_catch_syscall): Likewise.
2356         (catch_syscall_breakpoint_ops): Likewise.
2357         (syscall_catchpoint_p): Likewise.
2358         (create_syscall_event_catchpoint): Likewise.
2359         (catch_syscall_split_args): Likewise.
2360         (catch_syscall_command_1): Likewise.
2361         (is_syscall_catchpoint_enabled): Likewise.
2362         (catch_syscall_enabled): Likewise.
2363         (catching_syscall_number): Likewise.
2364         (catch_syscall_completer): Likewise.
2365         (clear_syscall_counts): Likewise.
2366         (initialize_breakpoint_ops): Move initialization of syscall
2367         catchpoints to break-catch-syscall.c.
2368         (_initialize_breakpoint): Move code related to syscall catchpoints
2369         to break-catch-syscall.c.
2370
2371 2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>
2372
2373         * breakpoint.c (breakpoint_find_if): New function.
2374         * breakpoint.h (breakpoint_find_if): New prototype.
2375
2376 2015-03-11  Gary Benson <gbenson@redhat.com>
2377
2378         * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
2379         * remote-fileio.c (remote_fileio_to_host_uint): New function.
2380         (remote_fileio_to_host_ulong): Likewise.
2381         (remote_fileio_to_host_mode): Likewise.
2382         (remote_fileio_to_host_time): Likewise.
2383         (remote_fileio_to_host_stat): Likewise.
2384         * remote.c (PACKET_vFile_fstat): New enum value.
2385         (remote_protocol_features): Register the "vFile:fstat" feature.
2386         (remote_hostio_fstat): New function.
2387         (remote_bfd_iovec_stat): Use the above.
2388         (_initialize_remote): Register new "set/show remote
2389         hostio-fstat-packet" command.
2390         * symfile.c (separate_debug_file_exists): Update comment.
2391         * NEWS: Announce new vFile:fstat packet.
2392
2393 2015-03-11  Gary Benson <gbenson@redhat.com>
2394
2395         * common/common-remote-fileio.h: New file.
2396         * common/common-remote-fileio.c: Likewise.
2397         * Makefile.in (SFILES): Add common/common-remote-fileio.c.
2398         (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
2399         (COMMON_OBS): Add common-remote-fileio.o.
2400         (common-remote-fileio.o): New rule.
2401         * remote-fileio.h (common-remote-fileio.h): New include.
2402         * remote-fileio.c (gdb/fileio.h): Do not include.
2403         (remote_fileio_to_be): Moved to common-remote-fileio.h.
2404         (remote_fileio_to_fio_uint): Likewise.
2405         (remote_fileio_to_fio_time): Likewise.
2406         (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
2407         (remote_fileio_to_fio_mode): Likewise.
2408         (remote_fileio_to_fio_ulong): Likewise.
2409         (remote_fileio_to_fio_stat): Likewise.
2410
2411 2015-03-11  Andy Wingo  <wingo@igalia.com>
2412
2413         * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
2414         we were checking the cached type, not the cached dynamic type.
2415
2416 2015-03-11  Andy Wingo  <wingo@igalia.com>
2417
2418         * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
2419         other strings, as these are on the GC'd heap, and will be
2420         collected along with the smob.
2421
2422 2015-03-11  Andy Wingo  <wingo@igalia.com>
2423
2424         * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
2425         (objfile_functions): Bind gdbscm_objfile_progspace to
2426         objfile-progspace.
2427         * guile/lib/gdb.scm: Add objfile-progspace to exports.
2428
2429 2015-03-11  Andy Wingo  <wingo@igalia.com>
2430
2431         * guile/guile.c (_initialize_guile): Disable automatic
2432         finalization, if Guile offers us that possibility.
2433         * guile/guile.c (call_initialize_gdb_module):
2434         * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
2435         finalizers in appropriate places.
2436         * configure.ac (AC_TRY_LIBGUILE): Add a check for
2437         scm_set_automatic_finalization_enabled.
2438         * configure: Regenerated.
2439
2440 2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2441
2442         * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
2443         SAL, if possible.
2444
2445 2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2446
2447         * s390-linux-nat.c (struct arch_lwp_info): New.
2448         (s390_fix_watch_points): Rename to...
2449         (s390_prepare_to_resume): ...this.  Skip the PER info update
2450         unless the watch points have changed.
2451         (s390_refresh_per_info, s390_new_thread): New functions.
2452         (s390_insert_watchpoint): Call s390_refresh_per_info instead of
2453         s390_fix_watch_points.
2454         (s390_remove_watchpoint): Likewise.
2455         (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
2456         Register s390_prepare_to_resume.
2457
2458 2015-03-09  Pedro Alves  <palves@redhat.com>
2459
2460         Revert:
2461         2015-03-07  Pedro Alves  <palves@redhat.com>
2462         * common/gdb_socket.h: New file.
2463         * ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
2464         sys/socket.h.
2465         (net_open): Use union gdb_sockaddr_u.
2466
2467 2015-03-07  Pedro Alves  <palves@redhat.com>
2468
2469         * configure.ac (build_warnings): Move -Wmissing-prototypes
2470         -Wdeclaration-after-statement -Wmissing-parameter-type
2471         -Wold-style-declaration -Wold-style-definition to the C-specific
2472         set.
2473         * configure: Regenerate.
2474
2475 2015-03-07  Pedro Alves  <palves@redhat.com>
2476
2477         * common/gdb_socket.h: New file.
2478         * ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
2479         sys/socket.h.
2480         (net_open): Use union gdb_sockaddr_u.
2481
2482 2015-03-07  Pedro Alves  <palves@redhat.com>
2483
2484         * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
2485         (exceptions_state_mc_action_iter)
2486         (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
2487         Don't define.
2488         [__cplusplus] (try_scope_depth): New global.
2489         [__cplusplus] (exception_try_scope_entry)
2490         (exception_try_scope_exit, gdb_exception_sliced_copy)
2491         (exception_rethrow): New functions.
2492         (throw_exception): In C++ mode, throw
2493         gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
2494         gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
2495         (throw_it): In C++ mode, use try_scope_depth.
2496         * common/common-exceptions.h [!__cplusplus]
2497         (exceptions_state_mc_action_iter)
2498         (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
2499         Don't declare.
2500         [__cplusplus] (exception_try_scope_entry)
2501         (exception_try_scope_exit, exception_rethrow): Declare.
2502         [__cplusplus] (struct exception_try_scope): New struct.
2503         [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
2504         C++ exceptions.
2505         (struct gdb_exception_RETURN_MASK_ALL)
2506         (struct gdb_exception_RETURN_MASK_ERROR)
2507         (struct gdb_exception_RETURN_MASK_QUIT): New types.
2508
2509 2015-03-07  Pedro Alves  <palves@redhat.com>
2510
2511         * main.c (handle_command_errors): Remove volatile qualifier from
2512         parameter.
2513
2514 2015-03-07  Pedro Alves  <palves@redhat.com>
2515
2516         * breakpoint.c (save_breakpoints): Adjust to avoid code between
2517         TRY and CATCH.
2518         * gdbtypes.c (safe_parse_type): Remove empty line.
2519         (types_deeply_equal):
2520         * guile/scm-frame.c (gdbscm_frame_name):
2521         * linux-thread-db.c (find_new_threads_once):
2522         * python/py-breakpoint.c (bppy_get_commands):
2523         * record-btrace.c (record_btrace_insert_breakpoint)
2524         (record_btrace_remove_breakpoint, record_btrace_start_replaying)
2525         (record_btrace_start_replaying): Adjust to avoid code between TRY
2526         and CATCH.
2527
2528 2015-03-07  Pedro Alves  <palves@redhat.com>
2529
2530         * common/common-exceptions.c (struct catcher) <exception>: No
2531         longer a pointer to volatile exception.  Now an exception value.
2532         <mask>: Delete field.
2533         (exceptions_state_mc_init): Remove all parameters.  Adjust.
2534         (exceptions_state_mc): No longer pop the catcher here.
2535         (exceptions_state_mc_catch): New function.
2536         (throw_exception): Adjust.
2537         * common/common-exceptions.h (exceptions_state_mc_init): Remove
2538         all parameters.
2539         (exceptions_state_mc_catch): Declare.
2540         (TRY_CATCH): Rename to ...
2541         (TRY): ... this.  Remove EXCEPTION and MASK parameters.
2542         (CATCH, END_CATCH): New.
2543         All callers adjusted.
2544
2545 2015-03-07  Tom Tromey  <tromey@redhat.com>
2546
2547         * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
2548
2549 2015-03-07  Pedro Alves  <palves@redhat.com>
2550
2551         * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
2552         (amd64_epilogue_frame_cache): Normal exception handling code.
2553         * break-catch-throw.c (check_status_exception_catchpoint)
2554         (re_set_exception_catchpoint): Ditto.
2555         * cli/cli-interp.c (safe_execute_command):
2556         * cli/cli-script.c (script_from_file): Ditto.
2557         * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
2558         Ditto.
2559         * compile/compile-object-run.c (compile_object_run): Ditto.
2560         * cp-abi.c (baseclass_offset): Ditto.
2561         * cp-valprint.c (cp_print_value): Ditto.
2562         * exceptions.c (catch_exceptions_with_msg):
2563         * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
2564         * frame.c (get_frame_address_in_block_if_available): Ditto.
2565         * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
2566         (i386_sigtramp_frame_cache): Ditto.
2567         * infcmd.c (post_create_inferior): Ditto.
2568         * linespec.c (parse_linespec, find_linespec_symbols):
2569         * p-valprint.c (pascal_object_print_value): Ditto.
2570         * parse.c (parse_expression_for_completion): Ditto.
2571         * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
2572         * remote.c (remote_get_noisy_reply): Ditto.
2573         * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
2574         * solib-svr4.c (solib_svr4_r_map): Ditto.
2575
2576 2015-03-06  Gary Benson  <gbenson@redhat.com>
2577
2578         * common/common-utils.h (startswith): New inline function.
2579         All places where this logic was used updated to use the above.
2580
2581 2015-03-05  Pedro Alves  <palves@redhat.com>
2582
2583         PR gdb/18002
2584         * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
2585         after reading the breakpoint's shadow memory.
2586
2587 2015-03-05  Mark Kettenis  <kettenis@gnu.org>
2588
2589         * hppabsd-nat.c: Remove file.
2590         * hppaobsd-nat.c: New file.
2591         * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c.  Add
2592         hppaobsd-nat.c.
2593         * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
2594         hppaobsd-nat.o.
2595
2596 2015-03-04  Pedro Alves  <palves@redhat.com>
2597
2598         * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
2599         (target_decr_pc_after_break): Delete declaration.
2600         * target.c (default_target_decr_pc_after_break)
2601         (target_decr_pc_after_break): Delete.
2602         * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
2603         gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
2604         * linux-thread-db.c (check_event): Likewise.
2605         * infrun.c (adjust_pc_after_break): Likewise.
2606         * darwin-nat.c (cancel_breakpoint): Likewise.
2607         * aix-thread.c (aix_thread_wait): Likewise.
2608         * target-delegates.c: Regenerate.
2609
2610 2015-03-04  Pedro Alves  <palves@redhat.com>
2611
2612         * linux-nat.c (save_sigtrap): Check for breakpoints before
2613         checking watchpoints.
2614         (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
2615         breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
2616         (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
2617         a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
2618         (linux_nat_stopped_by_sw_breakpoint)
2619         (linux_nat_supports_stopped_by_sw_breakpoint)
2620         (linux_nat_stopped_by_hw_breakpoint)
2621         (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
2622         (linux_nat_wait_1): Don't re-increment the PC if relying on
2623         SIGTRAP's siginfo->si_code.
2624         (linux_nat_add_target): Install new target methods.
2625         * linux-thread-db.c (check_event): Don't account for breakpoint PC
2626         offset if the target already adjusted the PC.
2627         * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
2628         (GDB_ARCH_TRAP_BRKPT): New.
2629         (TRAP_HWBKPT): Define if not already defined.
2630
2631 2015-03-04  Pedro Alves  <palves@redhat.com>
2632
2633         * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
2634         * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
2635         Delete field.
2636         <stop_reason>: New field.
2637         (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
2638         (packet_set_cmd_state): New function.
2639         (remote_protocol_features): Register the "swbreak" and "hwbreak"
2640         features.
2641         (remote_query_supported): If not disabled with the corresponding
2642         "set remote foo-packet" command, report support for the swbreak
2643         and hwbreak features.
2644         (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
2645         field.
2646         <stop_reason>: New field.
2647         (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
2648         (remote_wait_as): Adjust.
2649         (remote_stopped_by_sw_breakpoint)
2650         (remote_supports_stopped_by_sw_breakpoint)
2651         (remote_stopped_by_hw_breakpoint)
2652         (remote_supports_stopped_by_hw_breakpoint): New functions.
2653         (remote_stopped_by_watchpoint): New function.
2654         (init_remote_ops): Install them.
2655         (_initialize_remote): Register new "set/show remote
2656         swbreak-feature-packet" and "set/show remote
2657         swbreak-feature-packet" commands.
2658
2659 2015-03-04  Pedro Alves  <palves@redhat.com>
2660
2661         * btrace.h: Include target/waitstatus.h.
2662         (struct btrace_thread_info) <stop_reason>: New field.
2663         * record-btrace.c (record_btrace_step_thread): Use
2664         record_check_stopped_by_breakpoint instead of breakpoint_here_p.
2665         (record_btrace_decr_pc_after_break): Delete.
2666         (record_btrace_stopped_by_sw_breakpoint)
2667         (record_btrace_supports_stopped_by_sw_breakpoint)
2668         (record_btrace_stopped_by_hw_breakpoint)
2669         (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
2670         (init_record_btrace_ops): Install them.
2671         * record-full.c (record_full_hw_watchpoint): Delete and replace
2672         with ...
2673         (record_full_stop_reason): ... this throughout.
2674         (record_full_exec_insn): Adjust.
2675         (record_full_wait_1): Adjust.  No longer re-increment the PC.
2676         (record_full_wait_1): Adjust.  Use
2677         record_check_stopped_by_breakpoint instead of breakpoint_here_p.
2678         (record_full_stopped_by_watchpoint): Adjust.
2679         (record_full_stopped_by_sw_breakpoint)
2680         (record_full_supports_stopped_by_sw_breakpoint)
2681         (record_full_supports_stopped_by_sw_breakpoint)
2682         (record_full_stopped_by_hw_breakpoint)
2683         (record_full_supports_stopped_by_hw_breakpoint): New functions.
2684         (init_record_full_ops, init_record_full_core_ops): Install them.
2685         * record.c (record_check_stopped_by_breakpoint): New function.
2686         * record.h: Include target/waitstatus.h.
2687         (record_check_stopped_by_breakpoint): New declaration.
2688
2689 2015-03-04  Pedro Alves  <palves@redhat.com>
2690
2691         enum lwp_stop_reason -> enum target_stop_reason
2692         * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
2693         (linux_nat_stopped_by_watchpoint, status_callback)
2694         (linux_nat_wait_1): Adjust.
2695         * linux-nat.h (enum lwp_stop_reason): Delete.
2696         (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
2697         * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
2698         * target/waitstatus.h (enum target_stop_reason): New.
2699
2700 2015-03-04  Pedro Alves  <palves@redhat.com>
2701
2702         * breakpoint.c (need_moribund_for_location_type): New function.
2703         (bpstat_stop_status): Don't skipping checking moribund locations
2704         of breakpoint types which the target tell caused a stop.
2705         (program_breakpoint_here_p): New function, factored out from ...
2706         (bp_loc_is_permanent): ... this.
2707         (update_global_location_list): Don't create a moribund location if
2708         the target supports reporting stops of the type of the removed
2709         breakpoint.
2710         * breakpoint.h (program_breakpoint_here_p): New declaration.
2711         * infrun.c (adjust_pc_after_break): Return early if the target has
2712         already adjusted the PC.  Add comments.
2713         (handle_signal_stop): If nothing explains a signal, and the target
2714         tells us the stop was caused by a software breakpoint, check if
2715         there's a breakpoint instruction in the memory.  If so, adjust the
2716         PC before presenting the stop to the user.  Otherwise, ignore the
2717         trap.  If nothing explains a signal, and the target tells us the
2718         stop was caused by a hardware breakpoint, ignore the trap.
2719         * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
2720         to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
2721         to_supports_stopped_by_hw_breakpoint>: New fields.
2722         (target_stopped_by_sw_breakpoint)
2723         (target_supports_stopped_by_sw_breakpoint)
2724         (target_stopped_by_hw_breakpoint)
2725         (target_supports_stopped_by_hw_breakpoint): Define.
2726         * target-delegates.c: Regenerate.
2727
2728 2015-03-04  Pedro Alves  <palves@redhat.com>
2729
2730         * infrun.c (follow_fork_inferior): Use the whole of the
2731         inferior_ptid and pending_follow.related_pid ptids instead of
2732         building ptids from the process components.  Adjust verbose output
2733         to use target_pid_to_str.
2734         * linux-nat.c (linux_child_follow_fork): Use the whole of the
2735         inferior_ptid and pending_follow.related_pid ptids instead of
2736         building ptids from the process components.
2737
2738 2015-03-04  Mark Kettenis  <kettenis@gnu.org>
2739
2740         * inf-ptrace.c [PT_GET_PROCESS_STATE]
2741         (inf_ptrace_insert_fork_catchpoint): New function.
2742         (inf_ptrace_remove_fork_catchpoint): New function.
2743         (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
2744
2745 2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2746
2747         * s390-linux-tdep.c (s390_register_name): Return empty string
2748         instead of NULL for registers that shouldn't be visible.
2749
2750 2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2751
2752         * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
2753         XML file for 64-bit targets.
2754
2755 2015-03-03  Simon Marchi  <simon.marchi@ericsson.com>
2756
2757         * target.h (find_default_create_inferior): Remove declaration.
2758         (find_default_attach): Likewise.
2759
2760 2015-03-03  Pedro Alves  <palves@redhat.com>
2761
2762         * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
2763         Use ptid_get_pid to get the overall process id when resuming all
2764         threads.
2765
2766 2015-03-03  Pedro Alves  <palves@redhat.com>
2767
2768         * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
2769         the lwp field of ptid.  Pass the full ptid to get_thread_regcache.
2770         * inf-ptrace.c (get_ptrace_pid): New function.
2771         (inf_ptrace_resume): Use it.
2772         * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
2773         to the lower layer.
2774
2775 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
2776
2777         * nat/linux-btrace.c: Include sys/utsname.h.
2778         (linux_determine_kernel_ptr_bits): New.
2779         (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
2780         * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
2781         ptr_bits.
2782
2783 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
2784
2785         * btrace.c (ftrace_update_function): Treat return as tailcall for
2786         "_dl_runtime_resolve".
2787
2788 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
2789
2790         * btrace.h (btrace_function) <lbegin, lend>: Remove.
2791         * btrace.c (ftrace_debug): Do not print the line range.
2792         (ftrace_skip_file, ftrace_update_lines): Remove.
2793         (ftrace_new_function): Remove lbegin and lend initialization.
2794         (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
2795         * record-btrace.c (btrace_compute_src_line_range): New.
2796         (btrace_call_history_src_line): Call btrace_compute_src_line_range.
2797
2798 2015-03-02  Pedro Alves  <palves@redhat.com>
2799
2800         * infrun.c (follow_exec): Delete all threads of the process except
2801         the event thread.  Extended comments.
2802
2803 2015-03-02  Joel Brobecker  <brobecker@adacore.com>
2804
2805         * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
2806
2807 2015-03-02  Joel Brobecker  <brobecker@adacore.com>
2808
2809         * utils.h: Remove <stdbool.h> #include.
2810         (producer_is_gcc): Change return type to "int".
2811         * utils.c (producer_is_gcc): Change return type to int.
2812         Return 1 instead of true, and 0 instead of false.
2813         Adjust function documentation accordingly.
2814
2815 2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2816
2817         * s390-linux-nat.c (have_regset_vxrs): New static variable.
2818         (s390_linux_fetch_inferior_registers): Handle vector registers, if
2819         present.
2820         (s390_linux_store_inferior_registers): Likewise.
2821         (s390_get_hwcap): Remove function.  Embed its logic...
2822         (s390_read_description): ...here.  Yield a target description with
2823         vector registers if applicable.
2824         * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
2825         "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
2826         "features/s390x-tevx-linux64.c".
2827         (struct gdbarch_tdep) <v0_full_regnum>: New field.
2828         (s390_dwarf_regmap): Add vector registers.  Remove bogus entries
2829         for "GNU/Linux-specific registers".
2830         (s390_dwarf_reg_r0l): New enum value.
2831         (s390_dwarf_reg_to_regnum): Support vector registers.
2832         (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
2833         of GPR lower halves.
2834         (regnum_is_vxr_full): New function.
2835         (s390_register_name): New function.
2836         (s390_pseudo_register_name): Handle v0-v15, which are composed of
2837         f0-f15 and v0l-v15l.
2838         (s390_pseudo_register_type): Likewise.
2839         (s390_pseudo_register_read): Likewise.
2840         (s390_pseudo_register_write): Likewise.
2841         (s390_value_from_register): Account for the fact that values are
2842         placed left-justified in vector registers.
2843         (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
2844         the vector reggroup and omit them from the general reggroup.
2845         (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
2846         (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
2847         (s390_iterate_over_regset_sections): Add iterations for the two
2848         new vector regsets.
2849         (s390_core_read_description): Yield a target description with
2850         vector registers if applicable.
2851         (s390_gdbarch_init): Handle target descriptions with vector
2852         registers.  Add "register_name" gdbarch method.
2853         (_initialize_s390_tdep): Call new tdesc initialization functions.
2854         * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
2855         (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
2856         (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
2857         (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
2858         (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
2859         (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
2860         (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
2861         (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
2862         (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
2863         (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
2864         (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
2865         (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
2866         (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
2867         (S390_NUM_REGS): Adjust value.
2868         (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
2869         (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
2870         (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
2871         * NEWS: Announce S/390 vector register support.
2872
2873 2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2874
2875         * features/s390-tevx-linux64.xml: New file.
2876         * features/s390-vx-linux64.xml: New file.
2877         * features/s390-vx.xml: New file.
2878         * features/s390x-tevx-linux64.xml: New file.
2879         * features/s390x-vx-linux64.xml: New file.
2880         * features/Makefile (WHICH): Add s390-vx-linux64,
2881         s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
2882         (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
2883         (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
2884         macros.
2885         * features/s390-tevx-linux64.c: New generated file.
2886         * features/s390-vx-linux64.c: Likewise.
2887         * features/s390x-tevx-linux64.c: Likewise.
2888         * features/s390x-vx-linux64.c: Likewise.
2889         * regformats/s390-tevx-linux64.dat: Likewise.
2890         * regformats/s390-vx-linux64.dat: Likewise.
2891         * regformats/s390x-tevx-linux64.dat: Likewise.
2892         * regformats/s390x-vx-linux64.dat: Likewise.
2893
2894 2015-02-28  Doug Evans  <xdje42@gmail.com>
2895
2896         * symtab.h (struct symtab) <next>: Fix comment.
2897
2898 2015-02-27  Simon Marchi  <simon.marchi@ericsson.com>
2899
2900         * python/python.c (python_GdbModuleDef): Rename GdbMethods to
2901         python_GdbMethods.
2902
2903 2015-02-27  Pedro Alves  <palves@redhat.com>
2904
2905         * dtrace-probe.c (dtrace_probe_ops): Make extern.
2906
2907 2015-02-27  Pedro Alves  <palves@redhat.com>
2908
2909         * common/common-exceptions.h (exception_none): Declare.
2910         * common/common-exceptions.c (exception_none): Moved from
2911         exceptions.c.
2912         (exceptions_state_mc_init): Use exception_none.
2913         * exceptions.c (exception_none): Move to
2914         common/common-exceptions.c.
2915         * exceptions.h (exception_none): Move to
2916         common/common-exceptions.h.
2917
2918 2015-02-27  Pedro Alves  <palves@redhat.com>
2919
2920         * main.c (catch_command_errors, catch_command_errors_const):
2921         Remove 'mask' argument.  Adjust.
2922         (captured_main): Adjust callers.
2923
2924 2015-02-27  Pedro Alves  <palves@redhat.com>
2925
2926         * python/python-internal.h: Include "extension-priv.h".
2927
2928 2015-02-27  Pedro Alves  <palves@redhat.com>
2929
2930         * breakpoint.h (enum print_stop_action): Move further up in the
2931         file.
2932
2933 2015-02-27  Pedro Alves  <palves@redhat.com>
2934
2935         * gdbarch.sh: Include regcache.h.
2936         * gdbarch.h: Regenerate.
2937
2938 2015-02-27  Pedro Alves  <palves@redhat.com>
2939
2940         * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
2941         Remove duplicate const.
2942         * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
2943         duplicate const.
2944
2945 2015-02-27  Pedro Alves  <palves@redhat.com>
2946
2947         * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
2948         * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
2949         * features/feature_to_c.sh: Tag the generated xml_builtin array
2950         with extern const in C++ mode.
2951
2952 2015-02-27  Tom Tromey  <tromey@redhat.com>
2953
2954         * minidebug.c (struct lzma_stream): Rename to ...
2955         (struct gdb_lzma_stream): ... this.
2956         (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
2957
2958 2015-02-27  Pedro Alves  <palves@redhat.com>
2959
2960         * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
2961         function.
2962         (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
2963         (mi_cmd_stack_list_variables): Use it.
2964
2965 2015-02-27  Pedro Alves  <palves@redhat.com>
2966
2967         * x86-linux-nat.c (u_debugreg_offset): New function.
2968         (x86_linux_dr_get, x86_linux_dr_set): Use it.
2969
2970 2015-02-27  Pedro Alves  <palves@redhat.com>
2971
2972         * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
2973         declaration.
2974         Include break-common.h.
2975
2976 2015-02-27  Tom Tromey  <tromey@redhat.com>
2977             Pedro Alves <palves@redhat.com>
2978
2979         * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
2980         local used to iterate over enums.
2981         * completer.c (signal_completer): Likewise.
2982         * i386-tdep.c (i386_stap_parse_special_token): Likewise.
2983         * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
2984         * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
2985         * tui/tui-layout.c (next_layout, prev_layout): Likewise.
2986         * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
2987         (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
2988         * tui-wingeneral.c (tui_refresh_all):  Likewise.
2989
2990 2015-02-27  Pedro Alves  <palves@redhat.com>
2991
2992         * target.h: Include "infrun.h".
2993
2994 2015-02-27  Pedro Alves  <palves@redhat.com>
2995
2996         * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
2997
2998 2015-02-27  Pedro Alves  <palves@redhat.com>
2999
3000         * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
3001         (IPA_SYM): Use it.
3002         * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
3003
3004 2015-02-27  Pedro Alves  <palves@redhat.com>
3005
3006         * cli-out.c (_rl_erase_entire_line): Move declaration out of
3007         cli_mld_erase_entire_line, and make it extern "C".
3008         * common/common-defs.h (EXTERN_C): New.
3009         * completer.c (_rl_completion_prefix_display_length)
3010         (_rl_print_completions_horizontally, QSFUNC): Move declarations
3011         out of gdb_display_match_list_1.
3012         (_rl_qsort_string_compare): Move declaration out of
3013         gdb_display_match_list_1, and make it extern "C".
3014         * defs.h (re_comp): Use EXTERN_C.
3015         * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
3016         and make it extern "C".
3017         (monstartup): Move declaration out of maintenance_set_profile_cmd,
3018         and make it extern "C".
3019         (main): Move declaration out of maintenance_set_profile_cmd.
3020         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
3021         EXTERN_C.
3022
3023 2015-02-27  Pedro Alves  <palves@redhat.com>
3024
3025         * python/python.c (GdbMethods): Rename to ...
3026         (python_GdbMethods): ... this and make extern.
3027         (GdbModuleDef): Rename to ...
3028         (python_GdbModuleDef): ... this and make extern.
3029
3030 2015-02-27  Pedro Alves  <palves@redhat.com>
3031
3032         * record-btrace.c (set_record_btrace_cmdlist)
3033         (show_record_btrace_cmdlist): Remove redefinitions.
3034
3035 2015-02-27  Tom Tromey  <tromey@redhat.com>
3036             Pedro Alves  <palves@redhat.com>
3037
3038         * dwarf2-frame.c (enum cfa_how_kind, struct
3039         dwarf2_frame_state_reg_info): Move out of struct
3040         dwarf2_frame_state.
3041         * dwarf2read.c (struct tu_stats): Move out of struct
3042         dwarf2_per_objfile.
3043         (struct file_entry): Move out of struct line_header.
3044         (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
3045         typedef_field_list): Move out of struct field_info.
3046         * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
3047         Move out of struct dynamic_prop.
3048         (union type_owner, union field_location, struct field, struct
3049         range_bounds, union type_specific): Move out of struct main_type.
3050         (struct fn_fieldlist, struct fn_field, struct typedef_field)
3051         (VOFFSET_STATIC): Move out of struct cplus_struct_type.
3052         (struct call_site_target, union call_site_parameter_u, struct
3053         call_site_parameter): Move out of struct call_site.
3054         * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
3055         m32c_prologue.
3056         (enum srcdest_kind): Move out of struct srcdest.
3057         * main.c (enum cmdarg_kind): Move out of struct cmdarg.
3058         * prologue-value.h (enum prologue_value_kind): Move out of struct
3059         prologue_value.
3060         * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
3061         gdbarch_tdep.
3062         * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
3063         out of struct field_info.
3064         * symfile.h (struct other_sections): Move out of struct
3065         section_addr_info.
3066         * symtab.c (struct symbol_cache_slot): Move out struct
3067         block_symbol_cache.
3068         * target-descriptions.c (enum tdesc_type_kind): Move out of
3069         typedef struct tdesc_type.
3070         * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
3071         struct tui_line_or_address.
3072         * value.c (enum internalvar_kind, union internalvar_data): Move
3073         out of struct internalvar.
3074         * xtensa-tdep.h (struct ctype_cache): Move out of struct
3075         gdbarch_tdep.
3076
3077 2015-02-27  Tom Tromey  <tromey@redhat.com>
3078             Pedro Alves  <palves@redhat.com>
3079
3080         Rename symbols whose names are reserved C++ keywords throughout.
3081
3082 2015-02-27  Pedro Alves  <palves@redhat.com>
3083
3084         * Makefile.in (COMPILER): New, get it from autoconf.
3085         (COMPILE.pre, CC_LD): Use COMPILER.
3086         (CXX): Get from autoconf instead.
3087         (CXX_FOR_TARGET): Default to g++ instead of gcc.
3088         * acinclude.m4: Include build-with-cxx.m4.
3089         * build-with-cxx.m4: New file.
3090         * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
3091         Disable -Werror by default if building in C++ mode.
3092         (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
3093         -Wno-narrowing in C++ mode.  Only enable -Wpointer-sign in C mode.
3094         Run supported-warning-flags tests with the C++ compiler.
3095         Save/restore CXXFLAGS too.
3096         * configure: Regenerate.
3097
3098 2015-02-27  Pedro Alves  <palves@redhat.com>
3099
3100         * libiberty.m4: New file.
3101         * acinclude.m4: Include libiberty.m4.
3102         * configure.ac: Call libiberty_INIT.
3103         * config.in, configure: Regenerate.
3104
3105 2015-02-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3106
3107         * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
3108         31-bit targets, but 64-bit targets as well.
3109         (s390_gnu_triplet_regexp): New function.
3110         (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
3111         64-bit targets as well.  Set the gnu_triplet_regexp gdbarch
3112         method.
3113
3114 2015-02-27  Jon TURNEY  <jon.turney@dronecode.org.uk>  (tiny patch)
3115
3116         * windows-nat.c (CONTEXT_DEBUGGER): Remove.
3117         (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS.  Incorporate flags
3118         from CONTEXT_DEBUGGER.
3119
3120 2015-02-26  Doug Evans  <dje@google.com>
3121
3122         * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
3123         CHECK_TYPEDEF.
3124         (set_type_vptr_fieldno): Ditto.
3125         (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
3126         * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
3127
3128 2015-02-26  Pedro Alves  <palves@redhat.com>
3129
3130         * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
3131         * complaints.c (vcomplaint): Pass argument FMT directly to
3132         printf-like functions instead of complaint->fmt.
3133         * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
3134         * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
3135         * compile/compile-loc2c.c (pushf, unary, binary): Add
3136         ATTRIBUTE_PRINTF.
3137         (do_compile_dwarf_expr_to_c): Pass string literal as format string
3138         to pushf.
3139         (BINARY): Pass string literal as format string to 'binary'.
3140         * compile/compile-object-load.c (link_callbacks_einfo): Add
3141         ATTRIBUTE_PRINTF.
3142         * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
3143
3144 2015-02-26  Pedro Alves  <palves@redhat.com>
3145
3146         * windows-termcap.c: Rename to ...
3147         * stub-termcap.c: ... this.  Adjust header line.
3148         * Makefile.in (SFILES): Refer to stub-termcap.c instead of
3149         windows-termcap.c.
3150         * configure: Regenerate.
3151         * configure.ac: Refer to stub-termcap.o instead of
3152         windows-termcap.o.
3153         * gdb_curses.h: Mention stub-termcap.c instead of
3154         windows-termcap.c.
3155
3156 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
3157
3158         * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
3159         (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
3160
3161 2015-02-26  Antoine Tremblay  <antoine.tremblay@ericsson.com>
3162
3163         * gdb/infcmd.c (print_return_value): use type_to_string to print type.
3164
3165 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
3166
3167         * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
3168         bfd_canonicalize_symtab.
3169
3170 2015-02-25  John Baldwin  <jhb@FreeBSD.org>
3171
3172         * amd64fbsd-nat.c: Include sys/user.h.
3173         (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3174         instead of KERN_PS_STRINGS to locate the signal trampoline.
3175         * i386fbsd-nat.c: Include sys/user.h.
3176         (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3177         instead of KERN_PS_STRINGS to locate the signal trampoline.
3178         * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
3179         (amd64fbsd_sigtramp_p): New.
3180         (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
3181         longer set default values.
3182         (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
3183         * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
3184         (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
3185         (i386fbsd_freebsd4_sigtramp_start)
3186         (i386fbsd_freebsd4_sigtramp_middle)
3187         (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
3188         (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
3189         (i386fbsd_sigtramp_p): New.
3190         (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
3191         longer set default values.
3192         (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
3193
3194 2015-02-25  John Baldwin  <jhb@freebsd.org>
3195
3196         * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
3197         get_frame_register instead of frame_unwind_register_unsigned.
3198
3199 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
3200
3201         PR build/18033
3202         * compile/compile-c-support.c (c_compute_program): Change // comment.
3203         * compile/compile-object-load.c (setup_sections): Change // comment.
3204
3205 2015-02-26  Joel Brobecker  <brobecker@adacore.com>
3206
3207         PR build/18033:
3208         * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
3209
3210 2015-02-23  Pedro Alves  <palves@redhat.com>
3211
3212         * remote.c (skip_to_semicolon): New function.
3213         (remote_parse_stop_reply) <T stop reply>: Use it.  Don't
3214         special case the stop reasons that look like hex numbers
3215         upfront.  Instead handle real register numbers after matching
3216         all the known stop reasons.
3217
3218 2015-02-21  Doug Evans  <dje@google.com>
3219
3220         PR c++/17976, symtab/17821
3221         * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
3222         is_in_anonymous.  All callers updated.
3223         (find_symbol_in_baseclass): Ditto.
3224         (cp_lookup_nested_symbol_1): Ditto.  Don't search all static blocks
3225         for symbols in an anonymous namespace.
3226         * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
3227         DW_AT_name directly.
3228         (dwarf2_name): Convert missing namespace name to
3229         CP_ANONYMOUS_NAMESPACE_STR.
3230
3231 2015-02-20  Pedro Alves  <palves@redhat.com>
3232
3233         * linux-nat.c (linux_handle_extended_wait): Call
3234         thread_db_notice_clone whenever a new clone LWP is detected.
3235         (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
3236         functions.
3237         * linux-nat.h (thread_db_attach_lwp): Delete declaration.
3238         (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
3239         (linux_unstop_all_lwps): Declare.
3240         * linux-thread-db.c (struct thread_get_info_inout): Delete.
3241         (thread_get_info_callback): Delete.
3242         (thread_from_lwp): Use td_thr_get_info and record_thread.
3243         (thread_db_attach_lwp): Delete.
3244         (thread_db_notice_clone): New function.
3245         (try_thread_db_load_1): If /proc is mounted and shows the
3246         process'es task list, walk over all LWPs and call thread_from_lwp
3247         instead of relying on td_ta_thr_iter.
3248         (attach_thread): Don't call check_thread_signals here.  Split the
3249         tail part of the function (which adds the thread to the core GDB
3250         thread list) to ...
3251         (record_thread): ... this function.  Call check_thread_signals
3252         here.
3253         (thread_db_wait): Don't call thread_db_find_new_threads_1.  Always
3254         call thread_from_lwp.
3255         (thread_db_update_thread_list): Rename to ...
3256         (thread_db_update_thread_list_org): ... this.
3257         (thread_db_update_thread_list): New function.
3258         (thread_db_find_thread_from_tid): Delete.
3259         (thread_db_get_ada_task_ptid): Simplify.
3260         * nat/linux-procfs.c: Include <sys/stat.h>.
3261         (linux_proc_task_list_dir_exists): New function.
3262         * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
3263
3264 2015-02-20  Pedro Alves  <palves@redhat.com>
3265
3266         * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
3267         main LWP.  Handle the case of waitpid returning 0 if we're already
3268         attached to the LWP.  Don't set the LWP's last_resume_kind to
3269         resume_stop if we already knew about the LWP.
3270         (linux_nat_filter_event): Add debug logs.
3271
3272 2015-02-20  Pedro Alves  <palves@redhat.com>
3273
3274         * target.h (forward_target_decr_pc_after_break): Delete
3275         declaration.
3276
3277 2015-02-20  Pedro Alves  <palves@redhat.com>
3278
3279         PR threads/18006
3280         * linux-thread-db.c (thread_get_info_callback): Return early if
3281         the thread's lwp id is -1.
3282
3283 2015-02-20  Joel Brobecker  <brobecker@adacore.com>
3284
3285         GDB 7.9 released.
3286
3287 2015-02-19  Steve Ellcey  <sellcey@imgtec.com>
3288
3289         * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
3290         (dtrace_get_probes) Change type of variable 'dof'.
3291
3292 2015-02-19  Antoine Tremblay  <antoine.tremblay@ericsson.com>
3293
3294         PR breakpoints/16812
3295         * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
3296         * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
3297         * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
3298
3299 2015-02-19  David Taylor  <dtaylor@emc.com>
3300
3301         * common/ax.def (setv): Fix consumed entry in setv DEFOP.
3302
3303 2015-02-18  Patrick Palka  <patrick@parcs.ath.cx>
3304
3305         * tui/tui-io.c (tui_handle_resize_during_io): Remove this
3306         function.
3307         (tui_putc): Don't call tui_handle_resize_during_io.
3308         (tui_getc): Likewise.
3309         (tui_mld_getc): Likewise.
3310         * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
3311         (tui_sigwinch_token): New static variable.
3312         (tui_initialize_win): Adjust documentation.  Set
3313         tui_sigwinch_token.
3314         (tui_async_resize_screen): New asynchronous callback.
3315         (tui_sigwinch_handler): Adjust documentation.  Asynchronously
3316         invoke tui_async_resize_screen.
3317
3318 2015-02-18  Jose E. Marchesi  <jose.marchesi@oracle.com>
3319
3320         * configure: Regenerated.
3321         * configure.ac: Use GDB_AC_TRANSFORM.
3322         * Makefile.in (aclocal_m4_deps): Added transform.m4.
3323         * acinclude.m4: sinclude transform.m4.
3324         * transform.m4: New file.
3325         (GDB_AC_TRANSFORM): New macro.
3326
3327 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
3328
3329         * NEWS: Announce the support for DTrace SDT probes.
3330
3331 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
3332
3333         * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
3334         (amd64_dtrace_parse_probe_argument): New function.
3335         (amd64_dtrace_probe_is_enabled): Likewise.
3336         (amd64_dtrace_enable_probe): Likewise.
3337         (amd64_dtrace_disable_probe): Likewise.
3338         (amd64_linux_init_abi): Register the
3339         `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
3340         `gdbarch_dtrace_disable_probe' and
3341         `gdbarch_dtrace_probe_is_enabled' hooks.
3342         (amd64_dtrace_disabled_probe_sequence_1): New constant.
3343         (amd64_dtrace_disabled_probe_sequence_2): Likewise.
3344         (amd64_dtrace_enable_probe_sequence): Likewise.
3345         (amd64_dtrace_disable_probe_sequence): Likewise.
3346
3347 2015-01-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
3348
3349         * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
3350         the -probe-dtrace new vpossible value for PROBE_MODIFIER.
3351         * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
3352         handle ELF files.
3353         * Makefile.in (SFILES): dtrace-probe.c added.
3354         * configure: Regenerate.
3355         * dtrace-probe.c: New file.
3356         (SHT_SUNW_dof): New constant.
3357         (dtrace_probe_type): New enum.
3358         (dtrace_probe_arg): New struct.
3359         (dtrace_probe_arg_s): New typedef.
3360         (struct dtrace_probe_enabler): New struct.
3361         (dtrace_probe_enabler_s): New typedef.
3362         (dtrace_probe): New struct.
3363         (dtrace_probe_is_linespec): New function.
3364         (dtrace_dof_sect_type): New enum.
3365         (dtrace_dof_dofh_ident): Likewise.
3366         (dtrace_dof_encoding): Likewise.
3367         (DTRACE_DOF_ENCODE_LSB): Likewise.
3368         (DTRACE_DOF_ENCODE_MSB): Likewise.
3369         (dtrace_dof_hdr): New struct.
3370         (dtrace_dof_sect): Likewise.
3371         (dtrace_dof_provider): Likewise.
3372         (dtrace_dof_probe): Likewise.
3373         (DOF_UINT): New macro.
3374         (DTRACE_DOF_PTR): Likewise.
3375         (DTRACE_DOF_SECT): Likewise.
3376         (dtrace_process_dof_probe): New function.
3377         (dtrace_process_dof): Likewise.
3378         (dtrace_build_arg_exprs): Likewise.
3379         (dtrace_get_arg): Likewise.
3380         (dtrace_get_probes): Likewise.
3381         (dtrace_get_probe_argument_count): Likewise.
3382         (dtrace_can_evaluate_probe_arguments): Likewise.
3383         (dtrace_evaluate_probe_argument): Likewise.
3384         (dtrace_compile_to_ax): Likewise.
3385         (dtrace_probe_destroy): Likewise.
3386         (dtrace_gen_info_probes_table_header): Likewise.
3387         (dtrace_gen_info_probes_table_values): Likewise.
3388         (dtrace_probe_is_enabled): Likewise.
3389         (dtrace_probe_ops): New variable.
3390         (info_probes_dtrace_command): New function.
3391         (_initialize_dtrace_probe): Likewise.
3392         (dtrace_type_name): Likewise.
3393
3394 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
3395
3396         * gdbarch.sh (dtrace_parse_probe_argument): New.
3397         (dtrace_probe_is_enabled): Likewise.
3398         (dtrace_enable_probe): Likewise.
3399         (dtrace_disable_probe): Likewise.
3400         * gdbarch.c: Regenerate.
3401         * gdbarch.h: Regenerate.
3402
3403 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
3404
3405         * stap-probe.c (stap_probe_ops): Add NULLs in the static
3406         stap_probe_ops for `enable_probe' and `disable_probe'.
3407         * probe.c (enable_probes_command): New function.
3408         (disable_probes_command): Likewise.
3409         (_initialize_probe): Define the cli commands `enable probe' and
3410         `disable probe'.
3411         (parse_probe_linespec): New function.
3412         (info_probes_for_ops): Use parse_probe_linespec.
3413         * probe.h (probe_ops): New hooks `enable_probe' and
3414         `disable_probe'.
3415
3416 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
3417
3418         * probe.c (compute_probe_arg): Moved from stap-probe.c
3419         (compile_probe_arg): Likewise.
3420         (probe_funcs): Likewise.
3421         * stap-probe.c (compute_probe_arg): Moved to probe.c.
3422         (compile_probe_arg): Likewise.
3423         (probe_funcs): Likewise.
3424
3425 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
3426
3427         * probe.c (print_ui_out_not_applicables): New function.
3428         (exists_probe_with_pops): Likewise.
3429         (info_probes_for_ops): Do not include column headers for probe
3430         types for which no probe has been actually found on any object.
3431         Also invoke `print_ui_out_not_applicables' in order to match the
3432         column rows with the header when probes of several types are
3433         listed.
3434         Print the "Type" column.
3435         * probe.h (probe_ops): Added a new probe operation `type_name'.
3436         * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
3437         (stap_type_name): New function.
3438
3439 2015-02-17  Patrick Palka  <patrick@parcs.ath.cx>
3440
3441         * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
3442         (key_is_command_char): Delete.
3443
3444 2015-02-17  Pedro Alves  <palves@redhat.com>
3445
3446         * tui/tui.c (tui_enable): Resize windows before anything
3447         might show a window.
3448
3449 2015-02-17  Max Ostapenko  <m.ostapenko@partner.samsung.com>
3450
3451         PR gdb/17984
3452         * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
3453         (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
3454         call.
3455         * aarch64-tdep.h (tdesc_aarch64): Declare.
3456
3457 2015-02-12  Mark Wielaard  <mjw@redhat.com>
3458
3459         * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
3460
3461 2015-02-13  Doug Evans  <dje@google.com>
3462
3463         * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
3464         anonymous_namespace to is_in_anonymous for consistency with the rest
3465         of the file.
3466         (cp_lookup_bare_symbol): Fix typo in comment.
3467         (cp_search_static_and_baseclasses): Ditto.
3468         (search_symbol_list): Use vertical space in comment better.
3469         (reset_directive_searched): Ditto. Fix typo.
3470         (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
3471
3472 2015-02-13  Yao Qi  <yao.qi@arm.com>
3473
3474         * MAINTAINERS: Update my email address.
3475
3476 2015-02-12  Doug Evans  <dje@google.com>
3477
3478         * symtab.c (completion_list_add_name): Fix memory leak.
3479
3480 2015-02-12  Doug Evans  <dje@google.com>
3481
3482         * completer.c (complete_line): Remove incorrect comment.
3483
3484 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
3485
3486         * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
3487         (py_print_frame): Use RETURN_MASK_ERROR.
3488
3489 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
3490
3491         * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
3492         function comment.  Wrap all function that can throw in cleanups.
3493         (gdbpy_apply_frame_filter): Wrap all function that can throw in
3494         cleanups.
3495
3496 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
3497
3498         * python/py-framefilter.c (py_print_frame): Substitute goto error.
3499         Remove the error label.
3500
3501 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
3502
3503         * python/py-framefilter.c (py_print_frame): Put conditional code paths
3504         with goto first, indent the former else codepath left.  Put variable
3505         'elided' to a new inner block.
3506
3507 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
3508
3509         * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
3510
3511 2015-02-11  Pedro Alves  <palves@redhat.com>
3512
3513         * xcoffread.c (within_function): Delete.
3514
3515 2015-02-11  Tom Tromey  <tromey@redhat.com>
3516             Pedro Alves <palves@redhat.com>
3517
3518         * breakpoint.c (base_breakpoint_ops): Delete.
3519         * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
3520         * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
3521         * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
3522         * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
3523         * python/py-arch.c (arch_object_type): Make extern.
3524         * python/py-block.c (block_syms_iterator_object_type): Make extern.
3525         * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
3526         * python/py-cmd.c (cmdpy_object_type): Make extern.
3527         * python/py-continueevent.c (continue_event_object_type)
3528         * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
3529         parameter.  Update all callers.
3530         * python/py-evtregistry.c (eventregistry_object_type): Make extern.
3531         * python/py-exitedevent.c (exited_event_object_type): Make extern.
3532         * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
3533         * python/py-function.c (fnpy_object_type): Make extern.
3534         * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
3535         * python/py-infevents.c (call_pre_event_object_type)
3536         (inferior_call_post_event_object_type).
3537         (memory_changed_event_object_type): Make extern.
3538         * python/py-infthread.c (thread_object_type): Make extern.
3539         * python/py-lazy-string.c (lazy_string_object_type): Make extern.
3540         * python/py-linetable.c (linetable_entry_object_type)
3541         (linetable_object_type, ltpy_iterator_object_type): Make extern.
3542         * python/py-newobjfileevent.c (new_objfile_event_object_type)
3543         (clear_objfiles_event_object_type): Make extern.
3544         * python/py-objfile.c (objfile_object_type): Make extern.
3545         * python/py-param.c (parmpy_object_type): Make extern.
3546         * python/py-progspace.c (pspace_object_type): Make extern.
3547         * python/py-signalevent.c (signal_event_object_type): Make extern.
3548         * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
3549         * python/py-type.c (type_object_type, field_object_type)
3550         (type_iterator_object_type): Make extern.
3551         * python/python.c (python_extension_script_ops)
3552         (python_extension_ops): Make extern.
3553         * stap-probe.c (stap_probe_ops): Make extern.
3554
3555 2015-02-11  Pedro Alves  <pedro@codesourcery.com>
3556
3557         * infrun.c (adjust_pc_after_break): Don't adjust the PC just
3558         because the event thread is not the current thread.
3559
3560 2015-02-11  Doug Evans  <xdje42@gmail.com>
3561
3562         * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
3563         been initialized yet, return NULL.
3564
3565 2015-02-11  Doug Evans  <dje@google.com>
3566
3567         * symfile.h (new_symfile_objfile): Delete.
3568         * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
3569         All callers updated.
3570
3571 2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>
3572
3573         * tui/tui-io.c (tui_handle_resize_during_io): Call
3574         tui_update_gdb_sizes() after resizing the screen.
3575         * tui/tui.c (tui_enable): Resize the terminal before
3576         calling tui_update_gdb_sizes().
3577
3578 2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>
3579
3580         * tui/tui-io.c (tui_getc): Move cursor to the end of the command
3581         line before printing a newline.
3582
3583 2015-02-11  Mark Wielaard  <mjw@redhat.com>
3584
3585         * utils.c (producer_is_gcc): Return true or false.
3586
3587 2015-02-10  Mark Wielaard  <mjw@redhat.com>
3588
3589         * utils.h (producer_is_gcc): Change return type to bool. Add major
3590         argument.
3591         * utils.c (producer_is_gcc): Likewise.
3592         (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
3593         * dwarf2read.c (check_producer): Likewise.
3594
3595 2015-02-10  Pedro Alves  <palves@redhat.com>
3596
3597         * infrun.c (displaced_step_fixup): Switch to the event thread
3598         before calling gdbarch_displaced_step_fixup.
3599
3600 2015-02-10  Antoine Tremblay <antoine.tremblay@ericsson.com>
3601
3602         * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
3603
3604 2015-02-10  Simon Marchi  <simon.marchi@ericsson.com>
3605
3606         * ada-varobj.c (ada_name_of_child): Constify parent.
3607         (ada_path_expr_of_child): Same.
3608         (ada_value_of_child): Same.
3609         (ada_type_of_child): Same.
3610         * c-varobj.c (c_is_path_expr_parent): Same.
3611         (c_describe_child): Same.
3612         (c_name_of_child): Same.
3613         (c_value_of_child): Same.
3614         (c_type_of_child): Same.
3615         (cplus_number_of_children): Same.
3616         (cplus_describe_child): Constify var.
3617         (cplus_name_of_child): Constify parent.
3618         (cplus_value_of_child): Same.
3619         (cplus_type_of_child): Same.
3620         * jv-varobj.c (java_name_of_child): Same.
3621         (java_value_of_child): Same.
3622         (java_type_of_child): Same.
3623         * varobj.c (value_of_child): Same.
3624         (varobj_default_is_path_expr_parent): Constify var, parent and return
3625         value.
3626         (varobj_get_path_expr): Constify var, modify path_expr through
3627         mutable_var.
3628         (install_new_value): Constify parent.
3629         (value_of_child): Constify parent.
3630         * varobj.h (struct varobj): Constify parent.
3631         (struct lang_varobj_ops): Constify name_of_child, value_of_child and
3632         type_of_child.
3633         (varobj_get_path_expr): Constify var.
3634         (varobj_get_path_expr_parent): Constify var and return value.
3635
3636 2015-02-10  Luis Machado  <lgustavo@codesourcery.com>
3637
3638         * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
3639         (arm_prologue_this_id): Move PC and SP limit checks to
3640         arm_prologue_unwind_stop_reason.
3641         (arm_prologue_unwind) <stop_reason> : Set to
3642         arm_prologue_unwind_stop_reason.
3643
3644 2015-02-09  Mark Wielaard  <mjw@redhat.com>
3645
3646         * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
3647         DW_LANG_Fortran08 as language_fortran.
3648
3649 2015-02-09  Sergio Durigan Junior  <sergiodj@redhat.com>
3650
3651         PR remote/17946
3652         * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
3653         of pointer against char.
3654
3655 2015-02-09  Mark Wielaard  <mjw@redhat.com>
3656
3657         * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
3658         (c_type_print_modifier): Likewise.
3659         * dwarf2read.c (read_tag_atomic_type): New function.
3660         (read_type_die_1): Handle DW_TAG_atomic_type.
3661         * gdbtypes.c (make_atomic_type): New function.
3662         (recursive_dump_type): Handle TYPE_ATOMIC.
3663         * gdbtypes.h (enum type_flag_values): Renumber.
3664         (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
3665         (TYPE_ATOMIC): New macro.
3666         (make_atomic_type): Declare.
3667
3668 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
3669
3670         * btrace.c (ftrace_find_call): Skip gaps.
3671         (ftrace_new_function): Initialize level.
3672         (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
3673         (ftrace_new_switch): Update
3674         level computation.
3675         (ftrace_new_gap): New.
3676         (ftrace_update_function): Create new function after gap.
3677         (btrace_compute_ftrace_bts): Create gap on error.
3678         (btrace_stitch_bts): Update parameters.  Clear trace if it
3679         becomes empty.
3680         (btrace_stitch_trace): Update parameters.  Update callers.
3681         (btrace_clear): Reset the number of gaps.
3682         (btrace_insn_get): Return NULL if the iterator points to a gap.
3683         (btrace_insn_number): Return zero if the iterator points to a gap.
3684         (btrace_insn_end): Allow gaps at the end.
3685         (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
3686         (btrace_find_insn_by_number): Assert that the found iterator does
3687         not point to a gap.
3688         (btrace_call_next, btrace_call_prev): Assert that the last function
3689         is not a gap.
3690         * btrace.h (btrace_bts_error): New.
3691         (btrace_function): Update comment.
3692         (btrace_function) <insn, insn_offset, number>: Update comment.
3693         (btrace_function) <errcode>: New.
3694         (btrace_thread_info) <ngaps>: New.
3695         (btrace_thread_info) <replay>: Update comment.
3696         (btrace_insn_get): Update comment.
3697         * record-btrace.c (btrace_ui_out_decode_error): New.
3698         (record_btrace_info): Print number of gaps.
3699         (btrace_insn_history, btrace_call_history): Call
3700         btrace_ui_out_decode_error for gaps.
3701         (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
3702
3703 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
3704
3705         * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
3706         * nat/linux-btrace.c: (btrace_this_cpu): New.
3707         (cpu_supports_bts): Call btrace_this_cpu.
3708         (intel_supports_bts): Add cpu parameter.
3709
3710 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
3711
3712         * btrace.h (btrace_insn_class): New.
3713         (btrace_insn) <size, iclass>: New.
3714         * btrace.c (ftrace_find_call): Update parameters.  Update users.
3715         Use instruction classification.
3716         (ftrace_new_return): Update parameters.  Update users.
3717         (ftrace_update_function): Update parameters.  Update users.  Use
3718         instruction classification.
3719         (ftrace_update_insns): Update parameters.  Update users.
3720         (ftrace_classify_insn): New.
3721         (btrace_compute_ftrace_bts): Fill in new btrace_insn fields.  Add
3722         TRY_CATCH around call to gdb_insn_length.
3723
3724 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
3725
3726         * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
3727         Update parameters.  Update users.
3728
3729 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
3730
3731         * btrace.c (parse_xml_btrace_conf_bts): Add size.
3732         (btrace_conf_bts_attributes): New.
3733         (btrace_conf_children): Add attributes.
3734         * common/btrace-common.h (btrace_config_bts): New.
3735         (btrace_config)<bts>: New.
3736         (btrace_config): Update comment.
3737         * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
3738         Use config.
3739         * features/btrace-conf.dtd: Increment version.  Add size
3740         attribute to bts element.
3741         * record-btrace.c (set_record_btrace_bts_cmdlist,
3742         show_record_btrace_bts_cmdlist): New.
3743         (record_btrace_adjust_size, record_btrace_print_bts_conf,
3744         record_btrace_print_conf, cmd_set_record_btrace_bts,
3745         cmd_show_record_btrace_bts): New.
3746         (record_btrace_info): Call record_btrace_print_conf.
3747         (_initialize_record_btrace): Add commands.
3748         * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
3749         (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
3750         (btrace_sync_conf): Synchronize bts size.
3751         (_initialize_remote): Add Qbtrace-conf:bts:size packet.
3752         * NEWS: Announce new commands and new packets.
3753
3754 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
3755
3756         * Makefile.in (XMLFILES): Add btrace-conf.dtd.
3757         * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
3758         (x86_linux_btrace_conf): New.
3759         (x86_linux_create_target): Initialize to_btrace_conf.
3760         * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
3761         Check format.  Split into this and ...
3762         (linux_enable_bts): ... this.
3763         (linux_btrace_conf): New.
3764         (perf_event_skip_record): Renamed into ...
3765         (perf_event_skip_bts_record): ... this.  Updated users.
3766         (linux_disable_btrace): Split into this and ...
3767         (linux_disable_bts): ... this.
3768         (linux_read_btrace): Check format.
3769         * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
3770         (linux_btrace_conf): New.
3771         (btrace_target_info)<ptid>: Moved.
3772         (btrace_target_info)<conf>: New.
3773         (btrace_target_info): Split into this and ...
3774         (btrace_tinfo_bts): ... this.  Updated users.
3775         * btrace.c (btrace_enable): Update parameters.
3776         (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
3777         (btrace_conf_children, btrace_conf_attributes)
3778         (btrace_conf_elements): New.
3779         * btrace.h (btrace_enable): Update parameters.
3780         (btrace_conf, parse_xml_btrace_conf): New.
3781         * common/btrace-common.h (btrace_config): New.
3782         * feature/btrace-conf.dtd: New.
3783         * record-btrace.c (record_btrace_conf): New.
3784         (record_btrace_cmdlist): New.
3785         (record_btrace_enable_warn, record_btrace_open): Pass
3786         &record_btrace_conf.
3787         (record_btrace_info): Print recording format.
3788         (cmd_record_btrace_bts_start): New.
3789         (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
3790         (_initialize_record_btrace): Add "record btrace bts" subcommand.
3791         Add "record bts" alias command.
3792         * remote.c (remote_state)<btrace_config>: New.
3793         (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
3794         (remote_protocol_features): Add qXfer:btrace-conf:read.
3795         (remote_open_1): Call remote_btrace_reset.
3796         (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
3797         (btrace_target_info)<conf>: New.
3798         (btrace_sync_conf, btrace_read_config): New.
3799         (remote_enable_btrace): Update parameters.  Call btrace_sync_conf and
3800         btrace_read_conf.
3801         (remote_btrace_conf): New.
3802         (init_remote_ops): Initialize to_btrace_conf.
3803         (_initialize_remote): Add qXfer:btrace-conf packet.
3804         * target.c (target_enable_btrace): Update parameters.
3805         (target_btrace_conf): New.
3806         * target.h (target_enable_btrace): Update parameters.
3807         (target_btrace_conf): New.
3808         (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
3809         (target_ops)<to_enable_btrace>: Update parameters and comment.
3810         (target_ops)<to_btrace_conf>: New.
3811         * target-delegates: Regenerate.
3812         * target-debug.h (target_debug_print_const_struct_btrace_config_p)
3813         (target_debug_print_const_struct_btrace_target_info_p): New.
3814         * NEWS: Announce new command and new packet.
3815
3816 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
3817
3818         * nat/linux-btrace.h (perf_event_buffer): New.
3819         (btrace_target_info) <buffer, size, data_head>: Replace with ...
3820         <bts>: ... this.
3821         * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
3822         (perf_event_buffer_size, perf_event_buffer_begin)
3823         (perf_event_buffer_end, linux_btrace_has_changed): Removed.
3824         Updated users.
3825         (perf_event_new_data): New.
3826
3827 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
3828
3829         * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
3830         * record-btrace.c (record_btrace_open): Remove call to
3831         target_supports_btrace.
3832         * remote.c (remote_supports_btrace): Update parameters.
3833         * target.c (target_supports_btrace): Update parameters.
3834         * target.h (to_supports_btrace, target_supports_btrace): Update
3835         parameters.
3836         * target-delegates.c: Regenerate.
3837         * target-debug.h (target_debug_print_enum_btrace_format): New.
3838         * nat/linux-btrace.c
3839         (kernel_supports_btrace): Rename into ...
3840         (kernel_supports_bts): ... this.  Update users.  Update warning text.
3841         (intel_supports_btrace): Rename into ...
3842         (intel_supports_bts): ... this.  Update users.
3843         (cpu_supports_btrace): Rename into ...
3844         (cpu_supports_bts): ... this.  Update users.
3845         (linux_supports_btrace): Update parameters.  Split into this and ...
3846         (linux_supports_bts): ... this.
3847         * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
3848
3849 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
3850
3851         * Makefile.in (SFILES): Add common/btrace-common.c.
3852         (COMMON_OBS): Add common/btrace-common.o.
3853         (btrace-common.o): Add build rules.
3854         * btrace.c (parse_xml_btrace): Update parameters.
3855         (parse_xml_btrace_block): Set format field.
3856         (btrace_add_pc, btrace_fetch): Use struct btrace_data.
3857         (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
3858         (btrace_compute_ftrace): Split into this and...
3859         (btrace_compute_ftrace_bts): ...this.
3860         (btrace_stitch_trace): Split into this and...
3861         (btrace_stitch_bts): ...this.
3862         * btrace.h (parse_xml_btrace): Update parameters.
3863         (make_cleanup_btrace_data): New.
3864         * common/btrace-common.c: New.
3865         * common/btrace-common.h: Include common-defs.h.
3866         (btrace_block_s): Update comment.
3867         (btrace_format): New.
3868         (btrace_format_string): New.
3869         (btrace_data_bts): New.
3870         (btrace_data): New.
3871         (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
3872         * remote.c (remote_read_btrace): Update parameters.
3873         * target.c (target_read_btrace): Update parameters.
3874         * target.h (target_read_btrace): Update parameters.
3875         (target_ops)<to_read_btrace>: Update parameters.
3876         * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
3877         * target-delegates.c: Regenerate.
3878         * target-debug (target_debug_print_struct_btrace_data_p): New.
3879         * nat/linux-btrace.c (linux_read_btrace): Split into this and...
3880         (linux_read_bts): ...this.
3881         * nat/linux-btrace.h (linux_read_btrace): Update parameters.
3882
3883 2015-02-06  Doug Evans  <dje@google.com>
3884
3885         * remote-m32r-sdi.c: Include symfile.h.
3886
3887 2015-02-06  Doug Evans  <dje@google.com>
3888
3889         * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
3890         * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
3891         to here.
3892
3893 2015-02-06  Pedro Alves  <palves@redhat.com>
3894
3895         * linux-thread-db.c (find_new_threads_callback): Add debug output.
3896
3897 2015-02-06  Simon Marchi  <simon.marchi@ericsson.com>
3898
3899         PR gdb/15678
3900         * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
3901         (enable_count_command): Check args for NULL value.
3902
3903 2015-02-05  Doug Evans  <xdje42@gmail.com>
3904
3905         * guile/scm-frame.c: Fix spelling errors in a comment.
3906
3907 2015-02-04  Jan Kratochvil  <jan.kratochvil@redhat.com>
3908
3909         * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
3910         * python/py-value.c (valpy_fetch_lazy): Use it.  Remove cast to the
3911         return type.
3912
3913 2015-02-04  Pedro Alves  <palves@redhat.com>
3914
3915         * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
3916         (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
3917         returns true.
3918         (resume_stopped_resumed_lwps): Don't check whether the thread is
3919         marked as executing.
3920         (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
3921
3922 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3923
3924         * regset.h (struct regset): Add flags field.
3925         (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
3926         * corelow.c (get_core_register_section): Add warning if the size
3927         exceeds the requested size and the regset does not have the
3928         REGSET_VARIABLE_SIZE flag set.
3929         * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
3930         flag.
3931         * armbsd-tdep.c (armbsd_gregset): Likewise.
3932         * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
3933         * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
3934         * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
3935         * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
3936
3937 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3938
3939         * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
3940         For ".reg-xstate", explicitly specify the requested section size
3941         via X86_XSTATE_SIZE instead of just 0 on input and
3942         X86_XSTATE_MAX_SIZE on output.
3943         * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
3944         Likewise.
3945
3946 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3947
3948         PR corefiles/17808:
3949         * gdbarch.sh (iterate_over_regset_sections_cb): Document this
3950         function type, particularly its SIZE parameter.
3951         * gdbarch.h: Regenerate.
3952         * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
3953         actual against required size using ">=" instead of "==".
3954         (amd64_collect_fpregset): Likewise.
3955         * i386-tdep.c (i386_supply_gregset): Likewise.
3956         (i386_collect_gregset): Likewise.
3957         (i386_supply_fpregset): Likewise.
3958         (i386_collect_fpregset): Likewise.
3959         * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
3960         (mips_fill_gregset_wrapper): Likewise.
3961         (mips_supply_fpregset_wrapper): Likewise.
3962         (mips_fill_fpregset_wrapper): Likewise.
3963         (mips64_supply_gregset_wrapper): Likewise.
3964         (mips64_fill_gregset_wrapper): Likewise.
3965         (mips64_supply_fpregset_wrapper): Likewise.
3966         (mips64_fill_fpregset_wrapper): Likewise.
3967         * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
3968         (am33_supply_fpregset_method): Likewise.
3969         (am33_collect_gregset_method): Likewise.
3970         (am33_collect_fpregset_method): Likewise.
3971
3972 2015-02-04  Doug Evans  <dje@google.com>
3973             Pedro Alves  <palves@redhat.com>
3974             Eli Zaretskii  <eliz@gnu.org>
3975
3976         PR tui/17810
3977         * tui/tui-command.c (tui_refresh_cmd_win): New function.
3978         * tui/tui-command.c (tui_refresh_cmd_win): Declare.
3979         * tui/tui-file.c: #include tui/tui-command.h.
3980         (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
3981         (tui_file_flush): Refresh command window if stream is gdb_stdout.
3982         * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
3983
3984 2015-02-04  Pedro Alves  <palves@redhat.com>
3985
3986         Fix build breakage.
3987         * event-loop.c (gdb_do_one_event): Add default switch case.
3988
3989 2015-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
3990
3991         Filter out inferior gcc option -fpreprocessed.
3992         * compile/compile.c (filter_args): New function.
3993         (get_args): Use it.
3994
3995 2015-02-03  Pedro Alves  <palves@redhat.com>
3996
3997         * event-loop.c: Don't declare nor define a queue type for
3998         gdb_event_p.
3999         (event_queue): Delete.
4000         (create_event, create_file_event, gdb_event_xfree)
4001         (initialize_event_loop, process_event): Delete.
4002         (gdb_do_one_event): Return as soon as one event is handled.
4003         (handle_file_event): Change prototype.  Used the passed in
4004         file_handler pointer and ready_mask instead of looping over all
4005         file handlers.
4006         (gdb_wait_for_event): Update the poll/select timeouts before
4007         blocking.  Run event handlers directly instead of queueing events.
4008         Return as soon as one event is handled.
4009         (struct async_event_handler_data): Delete.
4010         (invoke_async_event_handler): Delete.
4011         (check_async_event_handlers): Change return type to int.  Run
4012         event handlers directly instead of queueing events.  Return as
4013         soon as one event is handled.
4014         (handle_timer_event): Delete.
4015         (update_wait_timeout): New function, factored out from
4016         poll_timers.
4017         (poll_timers): Reimplement.
4018         * event-loop.h (initialize_event_loop): Delete declaration.
4019         * top.c (gdb_init): Don't call initialize_event_loop.
4020
4021 2015-02-03  Pedro Alves  <palves@redhat.com>
4022
4023         * event-loop.c (clear_async_event_handler): New function.
4024         * event-loop.h (clear_async_event_handler): New declaration.
4025         * record-btrace.c (record_btrace_async): New function.
4026         (init_record_btrace_ops): Install record_btrace_async.
4027         * record-full.c (record_full_async): New function.
4028         (record_full_resume): Don't mark the async event source here.
4029         (init_record_full_ops): Install record_full_async.
4030         (record_full_core_resume): Don't mark the async event source here.
4031         (init_record_full_core_ops): Install record_full_async.
4032         * remote.c (remote_async): Mark and clear the async stop reply
4033         queue event-loop token as appropriate.
4034
4035 2015-02-03  Pedro Alves  <palves@redhat.com>
4036
4037         * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
4038         target_is_async_p instead of target_can_async.
4039         (linux_nat_wait): Use target_is_async_p instead of
4040         target_can_async.  Don't enable async here.
4041         * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
4042         target_is_async_p instead of target_can_async.
4043
4044 2015-02-02  Simon Marchi  <simon.marchi@ericsson.com>
4045
4046         * varobj.h (lang_varobj_ops): Mention which return values need
4047         to be freed.
4048
4049 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
4050
4051         * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
4052
4053 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
4054
4055         PR gdb/17856:
4056         * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
4057         results found in the cache.
4058
4059 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
4060
4061         PR gdb/17854:
4062         * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
4063         when allocating a new one.
4064
4065 2015-02-01  Tom Tromey  <tom@tromey.com>
4066
4067         * MAINTAINERS: Remove myself.
4068
4069 2015-01-31  Doug Evans  <xdje42@gmail.com>
4070
4071         * dwarf2read.c (process_structure_scope): Update setting of
4072         TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
4073         * gdbtypes.c (internal_type_vptr_fieldno): New function.
4074         (set_type_vptr_fieldno): New function.
4075         (internal_type_vptr_basetype): New function.
4076         (set_type_vptr_basetype): New function.
4077         (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
4078         TYPE_VPTR_BASETYPE.
4079         (allocate_cplus_struct_type): Initialize vptr_fieldno.
4080         (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
4081         (print_cplus_stuff): ... moved here.
4082         (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
4083         * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
4084         moved to ...
4085         (struct cplus_struct_type): ... here.  All uses updated.
4086         (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
4087         (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
4088         (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
4089         * stabsread.c (read_tilde_fields): Update setting of
4090         TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
4091
4092 2015-01-31  Doug Evans  <xdje42@gmail.com>
4093
4094         * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
4095         to self_p.
4096         (cp_print_class_member): Rename local domain to self_type.
4097         * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
4098         domain_type to self_type.
4099         (set_die_type) <need_gnat_info>: Handle
4100         TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
4101         * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
4102         TYPE_SPECIFIC_SELF_TYPE.
4103         * gdbtypes.c (internal_type_self_type): New function.
4104         (set_type_self_type): New function.
4105         (smash_to_memberptr_type): Rename parameter domain to self_type.
4106         Update setting of TYPE_SELF_TYPE.
4107         (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
4108         (smash_to_method_type): Rename parameter domain to self_type.
4109         Update setting of TYPE_SELF_TYPE.
4110         (check_stub_method): Call smash_to_method_type.
4111         (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
4112         (copy_type_recursive): Ditto.
4113         * gdbtypes.h (enum type_specific_kind): New value
4114         TYPE_SPECIFIC_SELF_TYPE.
4115         (struct main_type) <type_specific>: New member self_type.
4116         (struct cplus_struct_type) <fn_field.type>: Update comment.
4117         (TYPE_SELF_TYPE): Rewrite.
4118         (internal_type_self_type, set_type_self_type): Declare.
4119         * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
4120         self_type.
4121         (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
4122         * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
4123         TYPE_TARGET_TYPE.
4124         * stabsread.c (read_member_functions): Mark methods with
4125         TYPE_CODE_METHOD, not TYPE_CODE_FUNC.  Update setting of
4126         TYPE_SELF_TYPE.
4127
4128 2015-01-31  Doug Evans  <xdje42@gmail.com>
4129
4130         * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
4131         All uses updated.
4132
4133 2015-01-31  Doug Evans  <xdje42@gmail.com>
4134
4135         * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
4136         or unions.  Return zero if union.
4137         (gnuv3_get_vtable): Call check_typedef.  Assert only passed structs.
4138         (gnuv3_rtti_type): Pass already-check_typedef'd value to
4139         gnuv3_get_vtable.
4140         (compute_vtable_size): Assert only passed structs.
4141         (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
4142
4143 2015-01-31  Doug Evans  <xdje42@gmail.com>
4144
4145         * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
4146         kinds.
4147
4148 2015-01-31  Gary Benson <gbenson@redhat.com>
4149             Doug Evans  <dje@google.com>
4150
4151         PR cli/9007
4152         PR cli/11920
4153         PR cli/15548
4154         * cli/cli-cmds.c (complete_command): Notify user if max-completions
4155         reached.
4156         * common/common-exceptions.h (enum errors)
4157         <MAX_COMPLETIONS_REACHED_ERROR>: New value.
4158         * completer.h (get_max_completions_reached_message): New declaration.
4159         (max_completions): Likewise.
4160         (completion_tracker_t): New typedef.
4161         (new_completion_tracker): New declaration.
4162         (make_cleanup_free_completion_tracker): Likewise.
4163         (maybe_add_completion_enum): New enum.
4164         (maybe_add_completion): New declaration.
4165         (throw_max_completions_reached_error): Likewise.
4166         * completer.c (max_completions): New global variable.
4167         (new_completion_tracker): New function.
4168         (free_completion_tracker): Likewise.
4169         (make_cleanup_free_completion_tracker): Likewise.
4170         (maybe_add_completions): Likewise.
4171         (throw_max_completions_reached_error): Likewise.
4172         (complete_line): Remove duplicates and limit result to max_completions
4173         entries.
4174         (get_max_completions_reached_message): New function.
4175         (gdb_display_match_list): Handle max_completions.
4176         (_initialize_completer): New declaration and function.
4177         * symtab.c: Include completer.h.
4178         (completion_tracker): New static variable.
4179         (completion_list_add_name): Call maybe_add_completion.
4180         (default_make_symbol_completion_list_break_on_1): Renamed from
4181         default_make_symbol_completion_list_break_on.  Maintain
4182         completion_tracker across calls to completion_list_add_name.
4183         (default_make_symbol_completion_list_break_on): New function.
4184         * top.c (init_main): Set rl_completion_display_matches_hook.
4185         * tui/tui-io.c: Include completer.h.
4186         (tui_old_rl_display_matches_hook): New static global.
4187         (tui_rl_display_match_list): Notify user if max-completions reached.
4188         (tui_setup_io): Save/restore rl_completion_display_matches_hook.
4189         * NEWS (New Options): Mention set/show max-completions.
4190
4191 2015-01-31  Gary Benson  <gbenson@redhat.com>
4192
4193         * symtab.c (struct add_name_data) <code>: New field.
4194         Updated comments.
4195         (add_symtab_completions): New function.
4196         (symtab_expansion_callback): Likewise.
4197         (default_make_symbol_completion_list_break_on): Set datum.code.
4198         Move minimal symbol scan before calling expand_symtabs_matching.
4199         Scan known primary symtabs for externs and statics before calling
4200         expand_symtabs_matching.  Pass symtab_expansion_callback as
4201         expansion_notify argument to expand_symtabs_matching.  Do not scan
4202         primary symtabs for externs and statics after calling
4203         expand_symtabs_matching.
4204
4205 2015-01-31  Gary Benson  <gbenson@redhat.com>
4206
4207         * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
4208         (struct quick_symbol_functions) <expand_symtabs_matching>:
4209         New argument expansion_notify.  All uses updated.
4210         (expand_symtabs_matching): New argument expansion_notify.
4211         All uses updated.
4212         * symfile-debug.c (debug_qf_expand_symtabs_matching):
4213         Also print expansion notify.
4214         * symtab.c (expand_symtabs_matching_via_partial): Call
4215         expansion_notify whenever a partial symbol table is expanded.
4216         * dwarf2read.c (dw2_expand_symtabs_matching): Call
4217         expansion_notify whenever a symbol table is instantiated.
4218
4219 2015-01-31  Doug Evans  <xdje42@gmail.com>
4220
4221         * cli-out.c: #include completer.h, readline/readline.h.
4222         (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
4223         (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
4224         (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
4225         * cli-out.h (cli_display_match_list): Declare.
4226         * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
4227         (ELLIPSIS_LEN): Ditto.
4228         (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
4229         (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
4230         (gdb_fnprint, gdb_print_filename): Ditto.
4231         (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
4232         (gdb_display_match_list): Ditto.
4233         * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
4234         (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
4235         (mld_beep_ftype, mld_read_key_ftype): Ditto.
4236         (match_list_displayer): New struct.
4237         (gdb_display_match_list): Declare.
4238         * top.c (init_main): Set rl_completion_display_matches_hook.
4239         * tui/tui-io.c: #include completer.h.
4240         (printable_part, PUTX, print_filename, get_y_or_n): Delete.
4241         (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
4242         (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
4243         (tui_mld_getc, tui_mld_read_key): Ditto.
4244         (tui_rl_display_match_list): Rewrite.
4245         (tui_handle_resize_during_io): New arg for_completion.  All callers
4246         updated.
4247
4248 2015-01-31  Doug Evans  <xdje42@gmail.com>
4249
4250         Add symbol lookup cache.
4251         * NEWS: Document new options and commands.
4252         * symtab.c (symbol_cache_key): New static global.
4253         (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
4254         (SYMBOL_LOOKUP_FAILED): New macro.
4255         (symbol_cache_slot_state): New enum.
4256         (block_symbol_cache): New struct.
4257         (symbol_cache): New struct.
4258         (new_symbol_cache_size, symbol_cache_size): New static globals.
4259         (hash_symbol_entry, eq_symbol_entry): New functions.
4260         (symbol_cache_byte_size, resize_symbol_cache): New functions.
4261         (make_symbol_cache, free_symbol_cache): New functions.
4262         (get_symbol_cache, symbol_cache_cleanup): New function.
4263         (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
4264         (symbol_cache_lookup, symbol_cache_clear_slot): New function.
4265         (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
4266         (symbol_cache_flush, symbol_cache_dump): New functions.
4267         (maintenance_print_symbol_cache): New function.
4268         (maintenance_flush_symbol_cache): New function.
4269         (symbol_cache_stats): New function.
4270         (maintenance_print_symbol_cache_statistics): New function.
4271         (symtab_new_objfile_observer): New function.
4272         (symtab_free_objfile_observer): New function.
4273         (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
4274         (_initialize_symtab): Init symbol_cache_key.  New parameter
4275         maint symbol-cache-size.  New maint commands print symbol-cache,
4276         print symbol-cache-statistics, flush-symbol-cache.
4277         Install new_objfile, free_objfile observers.
4278
4279 2015-01-31  Joel Brobecker  <brobecker@adacore.com>
4280
4281         PR symtab/17855
4282         * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
4283         to end.
4284
4285 2015-01-31  Doug Evans  <xdje42@gmail.com>
4286
4287         * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
4288         * auto-load.c: #include ctype.h.
4289         (struct auto_load_pspace_info): Replace member loaded_scripts with
4290         new members loaded_script_files, loaded_script_texts.
4291         (auto_load_pspace_data_cleanup): Update.
4292         (init_loaded_scripts_info): Update.
4293         (get_auto_load_pspace_data_for_loading): Update.
4294         (maybe_add_script_file): Renamed from maybe_add_script.  All callers
4295         updated.
4296         (maybe_add_script_text): New function.
4297         (clear_section_scripts): Update.
4298         (source_script_file, execute_script_contents): New functions.
4299         (source_section_scripts): Add support for
4300         SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
4301         (print_scripts): New function.
4302         (auto_load_info_scripts): Also print inlined scripts.
4303         (maybe_print_unsupported_script_warning): Renamed from
4304         unsupported_script_warning_print.  All callers updated.
4305         (maybe_print_script_not_found_warning): Renamed from
4306         script_not_found_warning_print.  All callers updated.
4307         * extension-priv.h (struct extension_language_script_ops): New member
4308         objfile_script_executor.
4309         * extension.c (ext_lang_objfile_script_executor): New function.
4310         * extension.h (objfile_script_executor_func): New typedef.
4311         (ext_lang_objfile_script_executor): Declare.
4312         * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
4313         * guile/guile.c (guile_extension_script_ops): Update.
4314         * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
4315         * python/python.c (python_extension_script_ops): Update.
4316         (gdbpy_execute_objfile_script): New function.
4317
4318 2015-01-31  Eli Zaretskii  <eliz@gnu.org>
4319
4320         * tui/tui-io.c (tui_expand_tabs): New function.
4321         (tui_puts, tui_redisplay_readline): Expand TABs into the
4322         appropriate number of spaces.
4323         * tui/tui-regs.c: Include tui-io.h.
4324         (tui_register_format): Call tui_expand_tabs to expand TABs into
4325         the appropriate number of spaces.
4326         * tui/tui-io.h: Add prototype for tui_expand_tabs.
4327
4328 2015-01-30  Doug Evans  <dje@google.com>
4329
4330         * NEWS: "info source" command now display producer string if present.
4331         * source.c (source_info): Print producer string if present.
4332
4333 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
4334
4335         * varobj.c (varobj_delete): Fix comment.
4336
4337 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
4338
4339         * varobj.c (create_child): Modify comment.
4340
4341 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
4342
4343         * ada-varobj.c (ada_number_of_children): Constify struct varobj *
4344         parameter.
4345         (ada_name_of_variable): Same.
4346         (ada_path_expr_of_child): Same.
4347         (ada_value_of_variable): Same.
4348         (ada_value_is_changeable_p): Same.
4349         (ada_value_has_mutated): Same.
4350         * c-varobj.c (varobj_is_anonymous_child): Same.
4351         (c_is_path_expr_parent): Same.
4352         (c_number_of_children): Same.
4353         (c_name_of_variable): Same.
4354         (c_path_expr_of_child): Same.
4355         (get_type): Same.
4356         (c_value_of_variable): Same.
4357         (cplus_number_of_children): Same.
4358         (cplus_name_of_variable): Same.
4359         (cplus_path_expr_of_child): Same.
4360         (cplus_value_of_variable): Same.
4361         * jv-varobj.c (java_number_of_children): Same.
4362         (java_name_of_variable): Same.
4363         (java_path_expr_of_child): Same.
4364         (java_value_of_variable): Same.
4365         * varobj.c (number_of_children): Same.
4366         (name_of_variable): Same.
4367         (is_root_p): Same.
4368         (varobj_ensure_python_env): Same.
4369         (varobj_get_objname): Same.
4370         (varobj_get_expression): Same.
4371         (varobj_get_display_format): Same.
4372         (varobj_get_display_hint): Same.
4373         (varobj_has_more): Same.
4374         (varobj_get_thread_id): Same.
4375         (varobj_get_frozen): Same.
4376         (dynamic_varobj_has_child_method): Same.
4377         (varobj_get_gdb_type): Same.
4378         (is_path_expr_parent): Same.
4379         (varobj_default_is_path_expr_parent): Same.
4380         (varobj_get_language): Same.
4381         (varobj_get_attributes): Same.
4382         (varobj_is_dynamic_p): Same.
4383         (varobj_get_child_range): Same.
4384         (varobj_value_has_mutated): Same.
4385         (varobj_get_value_type): Same.
4386         (number_of_children): Same.
4387         (name_of_variable): Same.
4388         (check_scope): Same.
4389         (varobj_editable_p): Same.
4390         (varobj_value_is_changeable_p): Same.
4391         (varobj_floating_p): Same.
4392         (varobj_default_value_is_changeable_p): Same.
4393
4394 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
4395
4396         * varobj.c (varobj_get_path_expr): Set var->path_expr.
4397         * c-varobj.c (c_path_expr_of_child): Set local var instead of
4398         child->path_expr.
4399         (cplus_path_expr_of_child): Same.
4400
4401 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
4402
4403         * mi-cmd-var.c (print_varobj): Free varobj_get_expression
4404         result.
4405         (mi_cmd_var_info_expression): Same.
4406         * varobj.c (varobj_get_expression): Mention in the comment that
4407         the result must by freed by the caller.
4408
4409 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
4410
4411         * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
4412         varobj_get_type.
4413         (varobj_update_one): Same.
4414         * varobj.c (update_type_if_necessary): Free curr_type_str and
4415         new_type_str.
4416         (varobj_get_type): Specify in comment that the result needs to be
4417         freed by the caller.
4418
4419 2015-01-29  Doug Evans  <dje@google.com>
4420
4421         PR symtab/17890
4422         * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
4423
4424 2015-01-25  Mark Wielaard  <mjw@redhat.com>
4425
4426         * dwarf2read.c (checkproducer): Call producer_is_gcc.
4427         * utils.c (producer_is_gcc_ge_4): Likewise.
4428         (producer_is_gcc): New function.
4429         * utils.h (producer_is_gcc): New declaration.
4430
4431 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
4432
4433         * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
4434         kind.
4435         * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
4436         parameter by "addr_stack" parameter.
4437         (resolve_dynamic_range): Replace "addr" parameter by
4438         "stack_addr" parameter.  Update function documentation.
4439         Update code accordingly.
4440         (resolve_dynamic_array, resolve_dynamic_union)
4441         (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
4442         (resolve_dynamic_type): Update code, following the changes made
4443         to resolve_dynamic_type_internal's interface.
4444         * dwarf2loc.h (struct property_addr_info): New.
4445         (dwarf2_evaluate_property): Replace "address" parameter
4446         by "addr_stack" parameter.  Adjust function documentation.
4447         (struct dwarf2_offset_baton): New.
4448         (struct dwarf2_property_baton): Update documentation of
4449         field "referenced_type" to be more general. New field
4450         "offset_info" in union data field.
4451         * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
4452         parameter by "addr_stack" parameter.  Adjust code accordingly.
4453         Add support for PROP_ADDR_OFFSET properties.
4454         * dwarf2read.c (attr_to_dynamic_prop): Add support for
4455         DW_AT_data_member_location attributes as well.  Use case
4456         statements instead of if/else condition.
4457
4458 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
4459
4460         * ada-varobj.c (ada_varobj_get_array_number_of_children):
4461         Return zero if PARENT_VALUE is NULL and parent_type's
4462         range type is dynamic.
4463
4464 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
4465
4466         * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
4467         nonzero if the type's subtype is dynamic.
4468         (resolve_dynamic_range): Also resolve the range's subtype.
4469
4470 2015-01-29  Alexander Klimov  <alserkli@inbox.ru>  (tiny patch)
4471
4472         Pushed by Joel Brobecker  <brobecker@adacore.com>.
4473         * symfile.c (unmap_overlay_command): Initialize sec to NULL.
4474
4475 2015-01-27  Doug Evans  <dje@google.com>
4476
4477         * NEWS: Mention gdb.Objfile.username.
4478         * python/py-objfile.c (objfpy_get_username): New function.
4479         (objfile_getset): Add "username".
4480
4481 2015-01-24  Mark Wielaard  <mjw@redhat.com>
4482
4483         * stack.c (return_command): Markup warning message with _.
4484
4485 2015-01-24  Doug Evans  <xdje42@gmail.com>
4486
4487         * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
4488
4489 2015-01-24  Jan Kratochvil  <jan.kratochvil@redhat.com>
4490
4491         Fix 100x slowdown regression on DWZ files.
4492         * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
4493         (struct line_header): Add offset and offset_in_dwz.
4494         (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
4495         (free_line_header_voidp): New declaration.
4496         (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
4497         functions.
4498         (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
4499         (handle_DW_AT_stmt_list): Use line_header_hash.
4500         (free_line_header_voidp): New function.
4501         (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
4502         (dwarf_decode_lines): New parameter decode_mapping, use it.
4503         (dwarf2_free_objfile): Free line_header_hash.
4504
4505 2015-01-23  Simon Marchi  <simon.marchi@ericsson.com>
4506
4507         PR gdb/17416
4508         * valops.c (value_rtti_indirect_type): Catch exception thrown by
4509         value_ind.
4510
4511 2015-01-15  Mark Wielaard  <mjw@redhat.com>
4512
4513         * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
4514         DW_AT_noreturn.
4515         * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
4516         calling_convention an 8 bit bit field.
4517         (TYPE_NO_RETURN): New macro.
4518         * infcmd.c (finish_command): Query if function does not return
4519         normally.
4520         * stack.c (return_command): Likewise.
4521
4522 2015-01-23  Pedro Alves  <palves@redhat.com>
4523
4524         * linux-nat.c (linux_is_async_p): New macro.
4525         (linux_nat_is_async_p):
4526         (linux_nat_terminal_inferior): Check whether the target can async
4527         instead of whether it is already async.
4528         (linux_nat_terminal_ours): Don't check whether the target is
4529         async.
4530         (linux_async_pipe): Use linux_is_async_p.
4531
4532 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
4533
4534         * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
4535         '-ascending'.
4536         * thread.c (tp_array_compar_ascending, tp_array_compar): New.
4537         (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
4538         Sort tp_array using tp_array_compar.
4539         (_initialize_thread): Extend thread_apply_all_command help.
4540
4541 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
4542
4543         * corelow.c (core_open): Call also thread_command.
4544         * gdbthread.h (thread_command): New prototype moved from ...
4545         * thread.c (thread_command): ... here.
4546         (thread_command): Make it global.
4547
4548 2015-01-22  Pedro Alves  <palves@redhat.com>
4549
4550         * configure.ac [*mingw32*]: Check $curses_found instead of
4551         $prefer_curses.
4552         * configure: Regenerate.
4553         * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
4554         HAVE_NCURSES_NCURSES_H checks.
4555
4556 2015-01-22  Eli Zaretskii  <eliz@gnu.org>
4557
4558         * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
4559         fails with the 1st arg NULL, try again with "unknown".  Don't test
4560         the "cup" capability: it isn't supported by the Windows port of
4561         ncurses, but the Windows console driver is still capable of
4562         supporting TUI.
4563
4564 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
4565
4566         * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
4567
4568 2015-01-22  Eli Zaretskii  <eliz@gnu.org>
4569
4570         * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
4571         (ALLDEPFILES): Remove irix5-nat.c.  These two are part of the
4572         reason that "make TAGS" is broken.
4573
4574 2015-01-22  Chen Gang  <gang.chen.5i5j@gmail.com>
4575
4576         * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
4577         and check additional store instructions.
4578
4579 2015-01-21  Wei-cheng Wang  <cole945@gmail.com>
4580
4581         * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
4582
4583 2015-01-21  Wei-cheng Wang  <cole945@gmail.com>
4584
4585         * ppc-linux-tdep.c (ppc_skip_trampoline_code,
4586         ppc_canonicalize_syscall, ppc_linux_syscall_record,
4587         ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
4588         * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
4589         * rs6000-tdep.c (rs6000_epilogue_frame_cache,
4590         rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
4591         rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
4592         ppc_process_record_op19, ppc_process_record_op31,
4593         ppc_process_record_op59, ppc_process_record_op60,
4594         ppc_process_record_op63): Likewise.
4595
4596 2015-01-20  Joel Brobecker  <brobecker@adacore.com>
4597
4598         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
4599         (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
4600         strerror.
4601
4602 2015-01-20  Wei-cheng Wang  <cole945@gmail.com>
4603
4604         * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
4605         ppc_process_record_op31, ppc_process_record_op59,
4606         ppc_process_record_op60, ppc_process_record_op63,
4607         ppc_process_record): Fix -Wformat warning.
4608         * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
4609         Remove unused variables.
4610
4611 2015-01-20  Chen Gang  <gang.chen.5i5j@gmail.com>
4612
4613         * MAINTAINERS (Write After Approval): Add "Chen Gang".
4614
4615 2015-01-19  Eli Zaretskii  <eliz@gnu.org>
4616
4617         * configure.ac [*mingw32*]: Only add windows-termcap.o to
4618         CONFIG_OBS if not building with a curses library.
4619         * configure: Regenerate.
4620
4621         * windows-termcap.c: Include defs.h.  Make the whole body empty if
4622         either one of HAVE_CURSES_H or HAVE_NCURSES_H or
4623         HAVE_NCURSES_NCURSES_H is defined.
4624
4625 2015-01-19  Joel Brobecker  <brobecker@adacore.com>
4626
4627         * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
4628         from end of line to start of next line.
4629
4630 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
4631
4632         * ppc-linux-tdep.c (ppc_skip_trampoline_code):
4633         Scan PLT stub backward for reverse debugging.
4634         * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
4635
4636 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
4637             Ulrich Weigand  <uweigand@de.ibm.com>
4638
4639         * configure.tgt (powerpc*-*-linux): Add linux-record.o to
4640         gdb_target_obs.
4641         (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
4642         record.
4643         (ppc_canonicalize_syscall, ppc_linux_syscall_record,
4644         ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
4645         (ppc_linux_init_abi): Set process_record, process_record_signal.
4646         * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
4647         ppc_linux_record_tdep to gdbarch_tdep.
4648         (ppc_process_record): New declaration.
4649         * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
4650         ppc_process_record_op19, ppc_process_record_op31,
4651         ppc_process_record_op59, ppc_process_record_op60,
4652         ppc_process_record_op63, ppc_process_record): New functions.
4653
4654 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
4655
4656         * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
4657         rs6000_in_function_epilogue_frame_p and add an argument
4658         for frame_info.
4659         (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
4660         rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
4661         New functions.
4662         (rs6000_epilogue_frame_unwind): New.
4663         (rs6000_gdbarch_init): Append epilogue unwinder.
4664
4665 2015-01-16  Sergio Durigan Junior  <sergiodj@redhat.com>
4666
4667         * nat/linux-personality.c: Replace "#ifndef
4668         HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
4669         !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
4670         systems.
4671
4672 2015-01-16  Eli Zaretskii  <eliz@gnu.org>
4673
4674         * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
4675         functions.
4676         (_initialize_tui_win) <border-kind, border-mode>:
4677         <active-border-mode>: Use tui_set_var_cmd as the "set" function.
4678         (tui_set_tab_width_command): Fix the commentary.
4679
4680         * tui/tui-win.h: Add prototype for tui_rehighlight_all.
4681
4682         * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
4683         Doc fix.
4684         (tui_set_tab_width_command): Delete and recreate the source and
4685         the disassembly windows, to show the effect of the changed tab
4686         size immediately.
4687
4688         * tui/tui-data.h (LINE_PREFIX): Make shorter
4689         (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
4690         "Thread NNNNN.XXXX" thread ID notation on Windows.
4691
4692 2015-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
4693
4694         Fix gcc-5 compilation.
4695         * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
4696
4697 2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>
4698
4699         * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
4700         (linux-personality.o): New rule.
4701         * common/common-defs.h: Include <stdint.h>.
4702         * config/aarch64/linux.mh (NATDEPFILES): Include
4703         linux-personality.o.
4704         * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
4705         * config/arm/linux.mh (NATDEPFILES): Likewise.
4706         * config/i386/linux64.mh (NATDEPFILES): Likewise.
4707         * config/i386/linux.mh (NATDEPFILES): Likewise.
4708         * config/ia64/linux.mh (NATDEPFILES): Likewise.
4709         * config/m32r/linux.mh (NATDEPFILES): Likewise.
4710         * config/m68k/linux.mh (NATDEPFILES): Likewise.
4711         * config/mips/linux.mh (NATDEPFILES): Likewise.
4712         * config/pa/linux.mh (NATDEPFILES): Likewise.
4713         * config/powerpc/linux.mh (NATDEPFILES): Likewise.
4714         * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
4715         * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
4716         * config/s390/linux.mh (NATDEPFILES): Likewise.
4717         * config/sparc/linux64.mh (NATDEPFILES): Likewise.
4718         * config/sparc/linux.mh (NATDEPFILES): Likewise.
4719         * config/tilegx/linux.mh (NATDEPFILES): Likewise.
4720         * config/xtensa/linux.mh (NATDEPFILES): Likewise.
4721         * defs.h: Remove #include <stdint.h> (moved to
4722         common/common-defs.h).
4723         * linux-nat.c: Include nat/linux-personality.h.  Remove #include
4724         <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
4725         nat/linux-personality.c).
4726         (linux_nat_create_inferior): Remove code to disable address space
4727         randomization (moved to nat/linux-personality.c).  Create cleanup
4728         to disable address space randomization.
4729         * nat/linux-personality.c: New file.
4730         * nat/linux-personality.h: Likewise.
4731
4732 2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>
4733
4734         * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
4735         common/posix-strerror.c.
4736         (posix-strerror.o): New rule.
4737         (mingw-strerror.o): Likewise.
4738         * common/common-utils.h (safe_strerror): Move prototype to here,
4739         from utils.h.
4740         * common/common.host: New file.
4741         * common/mingw-strerror.c: Likewise.
4742         * common/posix-strerror.c: Likewise.
4743         * configure: Regenerated.
4744         * configure.ac: Source common/common.host.  Add variable
4745         common_host_obs to gdb_host_obs.
4746         * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
4747         gdb/common/posix-strerror.c when warning about the use of
4748         strerror.
4749         * mingw-hdep.c (safe_strerror): Remove definition; move it to
4750         common/mingw-strerror.c.
4751         * posix-hdep.c (safe_strerror): Remove definition; move it to
4752         common/posix-hdep.c.
4753         * utils.h (safe_strerror): Remove prototype; move to
4754         common/common-utils.h.
4755
4756 2015-01-15  Joel Brobecker  <brobecker@adacore.com>
4757
4758         GDB 7.8.2 released.
4759
4760 2015-01-15  Joel Brobecker  <brobecker@adacore.com>
4761
4762         * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
4763         ___XA type if the array has already been fixed.
4764
4765 2015-01-14  Yao Qi  <yao@codesourcery.com>
4766
4767         * Makefile.in (ppc-linux.o): New rule.
4768         * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
4769         * configure.ac: AC_CHECK_FUNCS(getauxval).
4770         * config.in: Re-generated.
4771         * configure: Re-generated.
4772         * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
4773         Declare.
4774         * nat/ppc-linux.c: New file.
4775         * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
4776         Call ppc64_64bit_inferior_p.
4777
4778 2015-01-14  Yao Qi  <yao@codesourcery.com>
4779
4780         * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
4781         nat/ppc-linux.h.
4782         (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
4783         (PPC_FEATURE_HAS_DFP): Likewise.
4784         (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
4785         (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
4786         (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
4787         Include "nat/ppc-linux.h".
4788         * nat/ppc-linux.h: New file.
4789         * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
4790
4791 2015-01-14  Pedro Alves  <palves@redhat.com>
4792
4793         PR gdb/17525
4794         * breakpoint.c: Include "interps.h".
4795         (bpstat_do_actions_1): Also check whether the interpreter is
4796         async.
4797
4798 2015-01-14  Pedro Alves  <palves@redhat.com>
4799
4800         PR cli/17828
4801         * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
4802         reinstall if the interpreter is sync.
4803
4804 2015-01-13  Doug Evans  <dje@google.com>
4805
4806         * objfiles.c (objfile_filename): New function.
4807         * objfiles.h (objfile_filename): Declare it.
4808         (objfile_name): Add function comment.
4809         * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
4810         bfd file name (which may be realpath'd), and the original name.
4811
4812 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
4813
4814         * NEWS: Create a new section for the next release branch.
4815         Rename the section of the current branch, now that it has
4816         been cut.
4817
4818 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
4819
4820         GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
4821         * version.in: Bump version to 7.9.50.DATE-cvs.
4822
4823 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
4824
4825         * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
4826         Remove trailing new-line in argument of call to warning.
4827
4828 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
4829
4830         * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
4831         new-line in argument of call to "warning".
4832
4833 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
4834
4835         * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
4836         in static block, then try searching for primitive types.
4837
4838 2015-01-12  Patrick Palka  <patrick@parcs.ath.cx>
4839
4840         * top.h (gdb_add_history): Declare.
4841         * top.c (command_count): New variable.
4842         (gdb_add_history): New function.
4843         (gdb_safe_append_history): New static function.
4844         (quit_force): Call it.
4845         (command_line_input): Use gdb_add_history instead of
4846         add_history.
4847         * event-top.c (command_line_handler): Likewise.
4848
4849 2015-01-12  James Clarke  <jrtc27@jrtc27.com>  (tiny patch)
4850
4851         PR gdb/17046
4852         * darwin-nat.c: Replace <machine/setjmp.h> #include by
4853         <setjmp.h> #include.
4854
4855 2015-01-11  Doug Evans  <xdje42@gmail.com>
4856
4857         * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
4858
4859 2015-01-11  Doug Evans  <xdje42@gmail.com>
4860
4861         PR gdb/15830
4862         * NEWS: The "maint demangle" command is renamed as "demangle".
4863         * demangle.c: #include cli/cli-utils.h, language.h.
4864         (demangle_command): New function.
4865         (_initialize_demangle): Add new command "demangle".
4866         * maint.c (maintenance_demangle): Stub out.
4867         (_initialize_maint_cmds): Update help text for "maint demangle",
4868         and mark as deprecated.
4869
4870 2015-01-11  Mark Kettenis  <kettenis@gnu.org>
4871
4872         * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
4873         inferior_thread is a function.
4874
4875 2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>
4876
4877         * Makefile.in (.y.c): Don't munge yacc's #line
4878         directives.
4879
4880 2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>
4881
4882         * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
4883         to prompt for input.
4884         * tui/tui-hooks.c (tui_query_hook): Remove.
4885         (tui_install_hooks): Don't set deprecated_query_hook.
4886         * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
4887         height calculation.  Always update the command window's cur_line.
4888
4889 2015-01-09  Pedro Alves  <palves@redhat.com>
4890
4891         * breakpoint.c (hardware_breakpoint_inserted_here_p): New
4892         function.
4893         * breakpoint.h (hardware_breakpoint_inserted_here_p): New
4894         declaration.
4895         * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
4896         (linux_resume_one_lwp): Store the thread's PC.  Adjust to clear
4897         stop_reason.
4898         (check_stopped_by_watchpoint): New function.
4899         (save_sigtrap): Reimplement.
4900         (linux_nat_stopped_by_watchpoint): Adjust.
4901         (linux_nat_lp_status_is_event): Delete.
4902         (stop_wait_callback): Only call save_sigtrap after storing the
4903         pending status.
4904         (status_callback): If the thread had been stopped for a breakpoint
4905         that has since been removed, discard the event and resume the LWP.
4906         (count_events_callback, select_event_lwp_callback): Use
4907         lwp_status_pending_p instead of linux_nat_lp_status_is_event.
4908         (cancel_breakpoint): Rename to ...
4909         (check_stopped_by_breakpoint): ... this.  Record whether the LWP
4910         stopped for a software breakpoint or hardware breakpoint.
4911         (select_event_lwp): Only give preference to the stepping LWP in
4912         all-stop mode.  Adjust comments.
4913         (stop_and_resume_callback): Remove references to new_pending_p.
4914         (linux_nat_filter_event): Likewise.  Leave exit events of the
4915         leader thread pending here.  Handle signal short circuiting here.
4916         Only call save_sigtrap after storing the pending waitstatus.
4917         (linux_nat_wait_1): Remove 'retry' label.  Remove references to
4918         new_pending.  Don't handle leaving events the caller is not
4919         interested in pending here, nor handle signal short-circuiting
4920         here.  Also give equal priority to all LWPs that have had events
4921         in non-stop mode.  If reporting a software breakpoint event,
4922         unadjust the LWP's PC.
4923         * linux-nat.h (enum lwp_stop_reason): New.
4924         (struct lwp_info) <stop_pc>: New field.
4925         (struct lwp_info) <stopped_by_watchpoint>: Delete field.
4926         (struct lwp_info) <stop_reason>: New field.
4927         * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
4928
4929 2015-01-09  Pedro Alves  <palves@redhat.com>
4930
4931         * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
4932         Set the LWP's 'resumed' flag.
4933
4934 2015-01-09  Pedro Alves  <palves@redhat.com>
4935
4936         * linux-nat.c (linux_resume_one_lwp): New function.
4937         (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
4938         (linux_nat_resume): Use lwp_status_pending_p and
4939         linux_resume_one_lwp.
4940         (linux_handle_syscall_trap): Use linux_resume_one_lwp.
4941         (linux_handle_extended_wait): Use linux_resume_one_lwp.
4942         (status_callback, running_callback): Use lwp_status_pending_p.
4943         (lwp_status_pending_p): New function.
4944         (stop_and_resume_callback): Use lwp_status_pending_p.
4945         (linux_nat_filter_event): Use linux_resume_one_lwp.
4946         (linux_nat_wait_1): Always use status_callback to look for an LWP
4947         with a pending status.  Use linux_resume_one_lwp.
4948         (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
4949         linux_resume_one_lwp.
4950
4951 2015-01-09  Pedro Alves  <palves@redhat.com>
4952
4953         * breakpoint.c (bp_location_inserted_here_p): New function,
4954         factored out from ...
4955         (breakpoint_inserted_here_p): ... here.  Use
4956         ALL_BP_LOCATIONS_AT_ADDR.
4957         (software_breakpoint_inserted_here_p): Use
4958         bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
4959
4960 2014-01-09  Pedro Alves  <palves@redhat.com>
4961
4962         Skip enabling event reporting if the kernel supports
4963         PTRACE_EVENT_CLONE.
4964         * linux-thread-db.c: Include "nat/linux-ptrace.h".
4965         (thread_db_use_events): New function.
4966         (try_thread_db_load_1): Check thread_db_use_events before enabling
4967         event reporting.
4968         (update_thread_state): New function.
4969         (attach_thread): Use it.  Check thread_db_use_events before
4970         enabling event reporting.
4971         (thread_db_detach): Check thread_db_use_events before disabling
4972         event reporting.
4973         (find_new_threads_callback): Check thread_db_use_events before
4974         enabling event reporting.  Update the thread's state if not using
4975         libthread_db events.
4976
4977 2015-01-09  Pedro Alves  <palves@redhat.com>
4978
4979         * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
4980         about to wait for is > 0.
4981         * linux-thread-db.c (find_new_threads_callback): Ignore thread if
4982         the kernel thread ID is -1.
4983
4984 2015-01-09  Pedro Alves  <palves@redhat.com>
4985
4986         * linux-nat.c (attach_proc_task_lwp_callback): New function.
4987         (linux_nat_attach): Use linux_proc_attach_tgid_threads.
4988         (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
4989         ptrace option flags.
4990         * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
4991         field.
4992         * nat/linux-procfs.c: Include <dirent.h>.
4993         (linux_proc_get_int): New parameter "warn".  Handle it.
4994         (linux_proc_get_tgid): Adjust.
4995         (linux_proc_get_tracerpid): Rename to ...
4996         (linux_proc_get_tracerpid_nowarn): ... this.
4997         (linux_proc_pid_get_state): New function, factored out from
4998         (linux_proc_pid_has_state): ... this.  Add new parameter "warn"
4999         and handle it.
5000         (linux_proc_pid_is_gone): New function.
5001         (linux_proc_pid_is_stopped): Adjust.
5002         (linux_proc_pid_is_zombie_maybe_warn)
5003         (linux_proc_pid_is_zombie_nowarn): New functions.
5004         (linux_proc_pid_is_zombie): Use
5005         linux_proc_pid_is_zombie_maybe_warn.
5006         (linux_proc_attach_tgid_threads): New function.
5007         * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
5008         (linux_proc_get_tracerpid): Rename to ...
5009         (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
5010         (linux_proc_pid_is_gone): New declaration.
5011         (linux_proc_pid_is_zombie): Update comment.
5012         (linux_proc_pid_is_zombie_nowarn): New declaration.
5013         (linux_proc_attach_lwp_func): New typedef.
5014         (linux_proc_attach_tgid_threads): New declaration.
5015         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
5016         use nowarn functions.
5017         (linux_ptrace_attach_fail_reason_string): Move here from
5018         gdbserver/linux-low.c and rename.
5019         (ptrace_supports_feature): If the current ptrace options are not
5020         known yet, check them now, instead of asserting.
5021         * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
5022         Declare.
5023
5024 2015-01-09  Pedro Alves  <palves@redhat.com>
5025
5026         * linux-thread-db.c (thread_db_find_new_threads_silently)
5027         (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
5028         (find_new_threads_once): Print debug output on gdb_stdlog.
5029
5030 2015-01-09  Chen Gang  <gang.chen.5i5j@gmail.com>
5031             Pedro Alves  <palves@redhat.com>
5032
5033         * compile/compile.c: Include "gdb_wait.h".
5034         (do_rmdir): Check return value, and free 'zap'.
5035
5036 2015-01-08  Pedro Alves  <palves@redhat.com>
5037             Yao Qi  <yao@codesourcery.com>
5038
5039         * dwarf2loc.c (indirect_pieced_value): Don't call
5040         gdb_sign_extend.  Call extract_signed_integer instead.
5041         * utils.c (gdb_sign_extend): Remove.
5042         * utils.h (gdb_sign_extend): Remove declaration.
5043
5044 2015-01-07  Pierre Muller  <muller@sourceware.org>
5045
5046         PR symtab/17811
5047         * stabsread.c (define_symbol): Set language for C++ special symbols.
5048
5049 2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>
5050
5051         * inflow.c (initial_gdb_ttystate): Tweak comment.
5052
5053 2015-01-07  Joel Brobecker  <brobecker@adacore.com>
5054
5055         * inflow.c (set_initial_gdb_ttystate): Add empty line after
5056         comment documenting function.
5057
5058 2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>
5059
5060         * terminal.h (set_initial_gdb_ttystate): Declare.
5061         * inflow.c (initial_gdb_ttystate): New static variable.
5062         (set_initial_gdb_ttystate): New setter.
5063         (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
5064         instead of our current terminal state.
5065         * top.c (gdb_init): Call set_initial_gdb_ttystate.
5066
5067 2015-01-07  Joel Brobecker  <brobecker@adacore.com>
5068
5069         * guile/scm-type.c (tyscm_array_1): Add comment.
5070         * python/py-type.c (typy_array_1): Add comment.
5071
5072 2015-01-06  Joel Brobecker  <brobecker@adacore.com>
5073
5074         * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
5075         error if N2 is equal to N1 - 1.
5076
5077 2015-01-06  Joel Brobecker  <brobecker@adacore.com>
5078
5079         * python/py-type.c (typy_array_1): Do not raise negative-length
5080         exception if N2 is equal to N1 - 1.
5081
5082 2015-01-03  Doug Evans  <xdje42@gmail.com>
5083
5084         * c-exp.y: Whitespace cleanup.
5085         (classify_inner_name): Remove extra ;.
5086
5087 2015-01-02  Maciej W. Rozycki  <macro@codesourcery.com>
5088
5089         * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
5090         offset signed.
5091
5092 2015-01-02  Doug Evans  <dje@google.com>
5093
5094         * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
5095
5096 2015-01-02  Doug Evans  <dje@google.com>
5097
5098         * symtab.h (struct symbol): Fix typo in comment.
5099
5100 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
5101
5102         Update year range in copyright notice of all files.
5103
5104 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
5105
5106         * top.c (print_gdb_version): Update copyright year to 2015.
5107
5108 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
5109
5110         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
5111
5112 For older changes see ChangeLog-2014.
5113 \f
5114 Local Variables:
5115 mode: change-log
5116 left-margin: 8
5117 fill-column: 74
5118 version-control: never
5119 coding: utf-8
5120 End: