gdb/ChangeLog

   1 2013-07-05  Luis Machado  <lgustavo@codesourcery.com>
   2
   3         * rs6000-tdep.c (rs6000_stab_reg_to_regnum): Return the real
   4         register number instead of the pseudo register one.
   5         (rs6000_dwarf2_reg_to_regnum): Likewise.
   6
   7 2013-07-04  Pedro Alves  <palves@redhat.com>
   8
   9         * findvar.c (value_of_register): Use allocate_optimized_out_value
  10         if the register has been optimized out, instead of
  11         set_value_optimized_out.
  12         * frame-unwind.c (frame_unwind_got_optimized): Use
  13         allocate_optimized_out_value.
  14
  15 2013-07-04  Pedro Alves  <palves@redhat.com>
  16
  17         * value.c (value_bits_valid): If the value is not lval_computed,
  18         or doesn't have a check_validity hook, assume the value is entirely
  19         valid.
  20
  21 2013-07-04  Andrew Burgess  <aburgess@broadcom.com>
  22
  23         * stack.c (read_frame_arg): No longer fetch lazy values.
  24         * value.c (value_optimized_out): If the value is not already
  25         marked optimized out, and is lazy then fetch it.
  26         (value_primitive_field): Move optimized out check to later in the
  27         function, after we have loaded any lazy values.
  28         (value_fetch_lazy): Use optimized out flag directly rather than
  29         calling optimized_out method.
  30
  31 2013-07-04  Andrew Burgess  <aburgess@broadcom.com>
  32
  33         * valops.c: Don't include "user-regs.h".
  34         (value_fetch_lazy): Moved to value.c.
  35         * value.c: Include "user-regs.h".
  36         (value_fetch_lazy): Moved from valops.c.
  37
  38 2013-07-04  Yao Qi  <yao@codesourcery.com>
  39
  40         Revert:
  41         2013-06-27  Yao Qi  <yao@codesourcery.com>
  42
  43         * common/create-version.sh: Update comments.  Handle the case
  44         that TARGET_ALIAS is empty.
  45
  46 2013-07-03  Pedro Alves  <palves@redhat.com>
  47
  48         * Makefile.in (config.status): Depend on development.sh.
  49         (aclocal_m4_deps): Add libmcheck.m4.
  50         * acinclude.m4: Include libmcheck.m4.
  51         * configure.ac: Source development.sh instead of setting
  52         'development' here.  --enable-libmcheck/--disable-libmcheck code
  53         factored out to GDB_AC_LIBMCHECK.  Run it.
  54         * development.sh: New file.
  55         * libmcheck.m4: New file.
  56         * configure: Regenerate.
  57
  58 2013-07-02  Tom Tromey  <tromey@redhat.com>
  59
  60         * contrib/ari/update-web-ari.sh: Update for version.in change.
  61
  62 2013-07-02  Tom Tromey  <tromey@redhat.com>
  63
  64         * common/ptid.h: Comment fixes.
  65
  66 2013-07-01  Tom Tromey  <tromey@redhat.com>
  67
  68         * dwarf2read.c (dwarf2_get_dwz_file): Return NULL if
  69         .gnu_debugaltlink not found.  Use bfd_get_alt_debug_link_info.
  70         (dwarf2_read_index, create_all_comp_units): Update.
  71
  72 2013-07-01  Tom Tromey  <tromey@redhat.com>
  73
  74         * configure.ac (build_warnings): Add -Wold-style-definition.
  75         * configure: Rebuild.
  76         * machoread.c (_initialize_machoread): Use "(void)".
  77         * macrocmd.c (macro_inform_no_debuginfo): Fix formatting;
  78         use "(void)".
  79
  80 2013-07-01  Tom Tromey  <tromey@redhat.com>
  81
  82         * configure.ac (build_warnings): Add -Wold-style-declaration.
  83         * configure: Rebuild.
  84         * dsrec.c (make_srec): Use "static const", not "const static".
  85         * h8300-tdep.c (h8300_breakpoint_from_pc): Use "static const",
  86         not "const static".
  87         * mi/mi-parse.c (mi_no_values, mi_simple_values, mi_all_values):
  88         Use "static const", not "const static".
  89         * mn10300-tdep.c (mn10300_breakpoint_from_pc): Use "static const",
  90         not "const static".
  91         * moxie-tdep.c (moxie_breakpoint_from_pc): Use "static const",
  92         not "const static".
  93         * rs6000-tdep.c (rs6000_breakpoint_from_pc): Use "static const",
  94         not "const static".
  95         * v850-tdep.c (v850_breakpoint_from_pc): Use "static const",
  96         not "const static".
  97         (v850_dbtrap_breakpoint_from_pc): Likewise.
  98         * xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Use "static const",
  99         not "const static".
 100
 101 2013-07-01  Tom Tromey  <tromey@redhat.com>
 102
 103         * configure.ac (build_warnings): Add -Wmissing-parameter-type.
 104         * configure: Rebuild.
 105
 106 2013-07-01  Pedro Alves  <palves@redhat.com>
 107
 108         * defs.h: Include "pathmax.h".
 109         * utils.c: Don't include sys/param.h.
 110         (gdb_realpath): Remove code that checks for MAXPATHLEN.
 111         * solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
 112         instead of MAXPATHLEN.
 113         * solib-sunos.c: Don't include sys/param.h.
 114         * xcoffread.c: Don't include sys/param.h.
 115         * bsd-kvm.c: Don't include sys/param.h.
 116         * darwin-nat.c: Don't include sys/param.h.
 117         (darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
 118         * darwin-nat-info.c: Don't include sys/param.h.
 119         * fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
 120         MAXPATHLEN.
 121         * i386obsd-nat.c: Don't include sys/param.h.
 122         * inf-child.c: Don't include sys/param.h.
 123         (inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
 124         * linux-fork.c: Don't include sys/param.h.
 125         (fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
 126         * linux-nat.c: Don't include sys/param.h.
 127         (linux_child_pid_to_exec_file, linux_proc_pending_signals)
 128         (linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
 129         * m68klinux-nat.c: Don't include sys/param.h.
 130         * nbsd-nat.c: Don't include sys/param.h.
 131         (nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
 132         * ppc-linux-nat.c: Don't include sys/param.h.
 133         * rs6000-nat.c: Don't include sys/param.h.
 134         * spu-linux-nat.c. Don't include sys/param.h.
 135         * windows-nat.c: Don't include sys/param.h.
 136         * xtensa-linux-nat.c: Don't include sys/param.h.
 137         * config/i386/nm-fbsd.h: Don't include sys/param.h.
 138
 139 2013-07-01  Pedro Alves  <palves@redhat.com>
 140
 141         * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add pathmax.
 142         * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/pathmax.m4.
 143         * gnulib/aclocal.m4: Regenerate.
 144         * gnulib/config.in: Regenerate.
 145         * gnulib/configure: Regenerate.
 146         * gnulib/import/pathmax.h: New file.
 147         * gnulib/import/Makefile.am: Regenerate.
 148         * gnulib/import/Makefile.in: Regenerate.
 149         * gnulib/import/m4/gnulib-cache.m4: Regenerate.
 150         * gnulib/import/m4/gnulib-comp.m4: Regenerate.
 151         * gnulib/import/m4/pathmax.m4: New file.
 152
 153 2013-07-01  Pedro Alves  <palves@redhat.com>
 154
 155         * configure.ac (GDBINIT): Define, depending on host.
 156         * go32-nat.c (init_go32_ops): Don't override gdbinit here.
 157         * top.c (PATH_MAX): Delete fallback definition.
 158         (GDBINIT_FILENAME): Delete.
 159         (gdbinit): Reimplement as const char array set to the GDBINIT
 160         string constant.
 161         * top.h (gdbinit): Make const.
 162         * configure, config.in: Regenerate.
 163
 164 2013-07-01  Pedro Alves  <palves@redhat.com>
 165
 166         * cli/cli-cmds.c (source_script): Make 'file' parameter const.
 167         * cli/cli-cmds.h (source_script): Likewise.
 168         * exceptions.c (catch_command_errors_const): New function.
 169         * exceptions.h (catch_command_errors_const): Declare.
 170         * main.c (get_init_files): Make parameters const, and adjust.
 171         (captured_main): Make 'system_gdbinit', 'home_gdbinit' and
 172         'local_gdbinit' locals const.  Adjust to use
 173         catch_command_errors_const.
 174         (print_gdb_help): Make 'system_gdbinit', 'home_gdbinit' and
 175         'local_gdbinit' locals const.
 176
 177 2013-07-01  Pedro Alves  <palves@redhat.com>
 178
 179         * defs.h: Don't check HAVE_UNISTD_H before including <unistd.h>.
 180         (STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO): Delete.
 181         * tracepoint.c: Don't check HAVE_UNISTD_H before including
 182         <unistd.h>.
 183
 184 2013-07-01  Pedro Alves  <palves@redhat.com>
 185
 186         Import the "unistd" gnulib module.
 187         * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add "unistd".
 188         * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/off_t.m4,
 189         import/m4/ssize_t.m4, import/m4/sys_types_h.m4 and
 190         import/m4/unistd_h.m4.
 191         * gnulib/aclocal.m4: Renenerate.
 192         * gnulib/config.in: Renenerate.
 193         * gnulib/configure: Renenerate.
 194         * gnulib/import/Makefile.am: Renenerate.
 195         * gnulib/import/Makefile.in: Renenerate.
 196         * gnulib/import/m4/gnulib-cache.m4: Renenerate.
 197         * gnulib/import/m4/gnulib-comp.m4: Renenerate.
 198         * gnulib/import/m4/off_t.m4: New file.
 199         * gnulib/import/m4/ssize_t.m4: New file.
 200         * gnulib/import/m4/sys_types_h.m4: New file.
 201         * gnulib/import/m4/unistd_h.m4: New file.
 202         * gnulib/import/sys_types.in.h: New file.
 203         * gnulib/import/unistd.c: New file.
 204         * gnulib/import/unistd.in.h: New file.
 205
 206 2013-07-01  Pedro Alves  <palves@redhat.com>
 207
 208         * utils.c <pathconf/_PC_PATH_MAX use>: Check if _PC_PATH_MAX is
 209         defined instead of checking HAVE_UNISTD_H.
 210
 211 2013-07-01  Pedro Alves  <palves@redhat.com>
 212
 213         Reimport gnulib from scratch.
 214         * gnulib/Makefile.in (aclocal_m4_deps): Remove reference to
 215         import/m4/onceonly.m4.
 216         * gnulib/aclocal.m4: Renegerate.
 217         * gnulib/config.in: Renegerate.
 218         * gnulib/configure: Renegerate.
 219         * gnulib/import/Makefile.in: Renegerate.
 220         * gnulib/import/extra/update-copyright: Renegerate.
 221         * gnulib/import/m4/onceonly.m4: Delete.
 222
 223 2013-07-01  Pedro Alves  <palves@redhat.com>
 224
 225         * tui/tui-regs.c (pagination_enabled): Delete declaration.
 226
 227 2013-06-30  Jan Kratochvil  <jan.kratochvil@redhat.com>
 228
 229         Code cleanup.
 230         * remote.c (async_remote_interrupt_twice): Make it static.
 231         * remote.h (async_remote_interrupt_twice): Remove the declaration.
 232
 233 2013-06-29  Sergio Durigan Junior  <sergiodj@redhat.com>
 234
 235         * ia64-linux-tdep.c: Include <ctype.h>.
 236         (ia64_linux_stap_is_single_operand): New function.
 237         (ia64_linux_init_abi): Initialize SystemTap related attributes.
 238
 239 2013-06-28  Tom Tromey  <tromey@redhat.com>
 240
 241         * Makefile.in (version.c): Use version.in, not
 242         common/version.in.
 243         * common/create-version.sh: Likewise.
 244         * common/version.in: Move...
 245         * version.in: ...here.
 246
 247 2013-06-28  Pedro Alves  <palves@redhat.com>
 248
 249         * infrun.c (set_observer_mode): Don't declare pagination_enabled
 250         here.
 251         * utils.h (pagination_enabled): Declare.
 252
 253 2013-06-28  Pedro Alves  <palves@redhat.com>
 254
 255         * infrun.c (non_stop, non_stop_1, set_non_stop, show_non_stop):
 256         Move higher up in file.
 257
 258 2013-06-28  Tom Tromey  <tromey@redhat.com>
 259
 260         * tracepoint.c (deprecated_readline_begin_hook)
 261         (deprecated_readline_hook, deprecated_readline_end_hook): Don't
 262         declare.
 263
 264 2013-06-28  Pedro Alves  <palves@redhat.com>
 265
 266         PR tui/14880
 267         * tui/tui-regs.c (tui_get_register): Fetch value contents before
 268         checking if they're available.
 269         * value.c (value_available_contents_eq): Change comment.
 270         * value.h (value_available_contents_eq): Expand comment.
 271
 272 2013-06-27  Tom Tromey  <tromey@redhat.com>
 273
 274         * target.c (find_run_target): Remove.
 275         * target.h (find_run_target): Remove.
 276
 277 2013-06-27  Tom Tromey  <tromey@redhat.com>
 278
 279         * corelow.c (core_gdbarch): Now static.
 280
 281 2013-06-27  Tom Tromey  <tromey@redhat.com>
 282
 283         * target.c (target_struct_index): Remove.
 284
 285 2013-06-27  Pedro Alves  <palves@redhat.com>
 286
 287         * infrun.c: Remove comment describing the 'stepping over runtime
 288         loader dynamic symbol resolution code' mechanism; moved to
 289         gdbint.texinfo.
 290
 291 2013-06-27  Pedro Alves  <palves@redhat.com>
 292
 293         * exceptions.c (catch_command_errors): Remove spurious space.
 294         * exceptions.h (catch_command_errors): Second parameter is "arg",
 295         not "command".
 296
 297 2013-06-27  Yao Qi  <yao@codesourcery.com>
 298
 299         * common/create-version.sh: Update comments.  Handle the case
 300         that TARGET_ALIAS is empty.
 301
 302 2013-06-26  Pedro Alves  <palves@redhat.com>
 303
 304         * infrun.c (SOLIB_IN_DYNAMIC_LINKER): Delete macro and describing
 305         comment.
 306
 307 2013-06-26  Pedro Alves  <palves@redhat.com>
 308
 309         * infrun.c: Update comments on stepping over runtime loader
 310         dynamic symbol resolution code.
 311
 312 2013-06-26  Sergio Durigan Junior  <sergiodj@redhat.com>
 313
 314         * ax-gdb.h (union exp_element): Forward declare.
 315         * parser-defs.h: Include expression.h.
 316
 317 2013-06-26  Maciej W. Rozycki  <macro@codesourcery.com>
 318
 319         * mips-tdep.c (fetch_mips_16): Use unmake_compact_addr.
 320
 321 2013-06-26  Dmitry Kozlov <ddk@codesourcery.com>
 322
 323         * tracepoint.c (trace_save): Extend tsave to save starttime, stoptime.
 324
 325 2013-06-26  Dmitry Kozlov <ddk@codesourcery.com>
 326
 327         Fix trace-status to output proper start-time and stop-time.
 328         * tracepoint.c (trace_status_command): Fix type of printf arg to
 329         prevent improper type conversion.
 330         (trace_status_mi): Likewise.
 331
 332 2013-06-26  Maciej W. Rozycki  <macro@codesourcery.com>
 333
 334         * mips-tdep.c (mips_next_pc): Fix a typo.
 335
 336 2013-06-26  Maciej W. Rozycki  <macro@codesourcery.com>
 337
 338         * mips-tdep.c (micromips_scan_prologue): Fix a typo.
 339
 340 2013-06-26  Pedro Alves  <pedro@codesourcery.com>
 341             Yao Qi  <yao@codesourcery.com>
 342
 343         * mi/mi-cmds.c (mi_cmds): Register -trace-frame-collected.
 344         * mi/mi-cmds.h (mi_cmd_trace_frame_collected): Declare.
 345         * mi/mi-main.c (print_variable_or_computed): New function.
 346         (mi_cmd_trace_frame_collected): New function.
 347         * tracepoint.c (find_trace_state_variable_by_number): New.
 348         (struct traceframe_info): Move to tracepoint.h
 349         (struct collection_list): Likewise.
 350         (do_collect_symbol): Include locals and arguments in the
 351         collected variables list.
 352         (clear_collection_list): Clear wholly collected variables list
 353         and computed variables list.
 354         (append_exp): New function.
 355         (encode_actions_1): Include variables in the wholly
 356         collected variables list.  Include memory ranges and
 357         full-fledged expressions in the computed expressions list.
 358         (encode_actions): Move some code to ...
 359         Return the cleanup chain.
 360         (encode_actions_rsp): ... here.  New function.
 361         (get_traceframe_location, get_traceframe_info): Remove static.
 362         * tracepoint.h (struct memrange): Moved from tracepoint.c.
 363         (struct collection_list): Moved from tracepoint.c.  Add two
 364         new fields 'wholly_collected' and 'computed'.
 365         (find_trace_state_variable_by_number): Declare.
 366         (encode_actions): Adjust declaration.
 367         (encode_actions_rsp): Declare.
 368         (get_traceframe_info, get_traceframe_location): Declare.
 369
 370         * NEWS: Mention new MI command -trace-frame-collected.
 371
 372 2013-06-26  Pedro Alves  <pedro@codesourcery.com>
 373             Yao Qi  <yao@codesourcery.com>
 374
 375         * ctf.c (ctf_traceframe_info): Push trace state variables
 376         present in the trace data into the traceframe info object.
 377         * breakpoint.c (DEF_VEC_I): Remove.
 378         * common/filestuff.c (DEF_VEC_I): Likewise.
 379         * dwarf2loc.c (DEF_VEC_I): Likewise.
 380         * mi/mi-main.c (DEF_VEC_I): Likewise.
 381         * common/gdb_vecs.h (DEF_VEC_I): Define vector for int.
 382         * features/traceframe-info.dtd: Add tvar element and its
 383         attributes.
 384         * tracepoint.c (free_traceframe_info): Free vector 'tvars'.
 385         (build_traceframe_info): Push trace state variables present in
 386         the trace data into the traceframe info object.
 387         (traceframe_info_start_tvar): New function.
 388         (tvar_attributes): New.
 389         (traceframe_info_children): Add "tvar" element.
 390         * tracepoint.h (struct traceframe_info) <tvars>: New field.
 391
 392         * NEWS: Mention the change in GDB and GDBserver.
 393
 394 2013-06-26  Pedro Alves  <pedro@codesourcery.com>
 395             Yao Qi  <yao@codesourcery.com>
 396
 397         * tracepoint.c (trace_dump_command): Move code to ...
 398         (get_traceframe_location): ... here.  New.
 399
 400 2013-06-26  Pedro Alves  <pedro@codesourcery.com>
 401             Yao Qi  <yao@codesourcery.com>
 402
 403         * tracepoint.c (trace_dump_command): GDB emits an error
 404          instead of a warning when a traceframe is not selected.
 405
 406 2013-06-26  Pedro Alves  <pedro@codesourcery.com>
 407             Yao Qi  <yao@codesourcery.com>
 408
 409         * tracepoint.c (tracepoint_list, stepping_list): Remove.
 410         (clear_collection_list): Free fields 'aexpre_list' and 'list'
 411         in collection_list.
 412         (do_clear_collection_list, init_collection_list): New.
 413         (encode_actions): Add local variables 'tracepoint_list' and
 414         'stepping_list'.  Call init_collection_list and make cleanup
 415         which calls do_clear_collection_list.  Don't call
 416         clear_collection_list.
 417         (_initialize_tracepoint): Delete references to
 418         'tracepoint_list' and 'stepping_list'.
 419
 420 2013-06-25  Tom Tromey  <tromey@redhat.com>
 421
 422         * common/create-version.sh (date): Use "$", not "$$" in sed
 423         expression.
 424
 425 2013-06-25  Kevin Buettner  <kevinb@redhat.com>
 426
 427         * NEWS (New targets): Add entry for TI MSP430.
 428
 429 2013-06-25  Yao Qi  <yao@codesourcery.com>
 430
 431         * remote.c (remote_start_remote): Move code to upload tsv
 432         earlier.
 433
 434 2013-06-25  Yao Qi  <yao@codesourcery.com>
 435             Hui Zhu  <hui@codesourcery.com>
 436             Pedro Alves  <palves@redhat.com>
 437
 438         PR breakpoints/15075
 439         PR breakpoints/15434
 440         * breakpoint.c (bpstat_stop_status): Call
 441         b->ops->after_condition_true.
 442         (update_dprintf_command_list): Don't append "continue" command
 443         to the command list of dprintf breakpoint.
 444         (base_breakpoint_after_condition_true): New function.
 445         (base_breakpoint_ops): Add base_breakpoint_after_condition_true.
 446         (dprintf_after_condition_true): New function.
 447         (initialize_breakpoint_ops): Set dprintf_after_condition_true.
 448         * breakpoint.h (breakpoint_ops): Add after_condition_true.
 449
 450 2013-06-24  Kevin Buettner  <kevinb@redhat.com>
 451
 452         * Makefile.in (ALL_TARGET_OBS): Add msp430-tdep.o.
 453         (ALLDEPFILES): Add msp430-tdep.c.
 454         * configure.tgt (msp430*-*-elf): New target.
 455         * msp430-tdep.c: New file.
 456
 457 2013-06-24  Maciej W. Rozycki  <macro@codesourcery.com>
 458
 459         * mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
 460         microMIPS synthetic symbols.
 461
 462 2013-06-24  Maciej W. Rozycki  <macro@codesourcery.com>
 463
 464         * objfiles.h (pc_in_section): New prototype.
 465         (in_plt_section): Remove name argument, replace prototype with
 466         static inline function.
 467         * mips-tdep.h: Include "objfiles.h".
 468         (in_mips_stubs_section): New function.
 469         * hppa-tdep.h (gdbarch_tdep): Remove name argument of
 470         in_solib_call_trampoline member.
 471         (hppa_in_solib_call_trampoline): Remove name argument.
 472         * objfiles.c (pc_in_section): New function.
 473         (in_plt_section): Remove function.
 474         * mips-linux-tdep.c: Include "objfiles.h".
 475         (mips_linux_in_dynsym_stub): Call in_mips_stubs_section.  Remove
 476         name argument.  Return 1 rather than the low 16-bit halfword of
 477         any instruction examined.
 478         (mips_linux_in_dynsym_resolve_code): Update
 479         mips_linux_in_dynsym_stub call accordingly.
 480         * mips-tdep.c (mips_stub_frame_sniffer): Use in_mips_stubs_section
 481         rather than an equivalent hand-coded sequence.
 482         * hppa-hpux-tdep.c (in_opd_section): Remove function.
 483         (hppa32_hpux_in_solib_call_trampoline): Remove name argument.
 484         (hppa64_hpux_in_solib_call_trampoline): Likewise.
 485         (hppa64_hpux_find_global_pointer): Use pc_in_section rather than
 486         in_opd_section.
 487         * hppa-tdep.c (hppa_stub_unwind_sniffer): Remove name argument
 488         on call to tdep->in_solib_call_trampoline.
 489         (hppa_in_solib_call_trampoline): Remove name argument, update
 490         according to in_plt_section change.
 491         (hppa_skip_trampoline_code): Update according to in_plt_section
 492         change.
 493         * aarch64-tdep.c (aarch64_stub_unwind_sniffer): Likewise.
 494         * arm-symbian-tdep.c (arm_symbian_skip_trampoline_code):
 495         Likewise.
 496         * arm-tdep.c (arm_stub_unwind_sniffer): Likewise.
 497         * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
 498         * hppabsd-tdep.c (hppabsd_find_global_pointer): Likewise.
 499         * nios2-tdep.c (nios2_stub_frame_sniffer): Likewise.
 500         * nto-tdep.c (nto_relocate_section_addresses): Likewise.
 501         * s390-tdep.c (s390_stub_frame_sniffer): Likewise.
 502         * sh-tdep.c (sh_stub_unwind_sniffer): Likewise.
 503         * solib-dsbt.c (dsbt_in_dynsym_resolve_code): Likewise.
 504         * solib-frv.c (frv_in_dynsym_resolve_code): Likewise.
 505         * solib-svr4.c (svr4_in_dynsym_resolve_code): Likewise.
 506         * solib-target.c (solib_target_in_dynsym_resolve_code): Likewise.
 507         * sparc-tdep.c (sparc_analyze_prologue): Likewise.
 508         * tic6x-tdep.c (tic6x_stub_unwind_sniffer): Likewise.
 509
 510 2013-06-24  Joel Brobecker  <brobecker@adacore.com>
 511
 512         * common/create-version.sh: Fix expansion of $host_alias
 513         and $target_alias in generation of HOST_NAME and TARGET_NAME
 514         (resp.).
 515
 516 2013-06-24  Tom Tromey  <tromey@redhat.com>
 517
 518         * common/create-version.sh: New file.
 519         * Makefile.in (version.c): Use bfd/version.h, common/version.in,
 520         create-version.sh.
 521         (HFILES_NO_SRCDIR): Use common/version.h.
 522         * version.in: Move to ...
 523         * common/version.in: ... here.  Replace date with "DATE".
 524         * version.h: Move to ...
 525         * common/version.h: ... here.
 526
 527 2013-06-21  Joel Brobecker  <brobecker@adacore.com>
 528
 529         * gdb/gnulib/Makefile.in: Update date in copyright header.
 530         * gdb/gnulib/configure.ac: Ditto.
 531         * gdb/gnulib/update-gnulib.sh: Ditto.
 532
 533 2013-06-21  Joel Brobecker  <brobecker@adacore.com>
 534
 535         * copyright.py (EXCLUDE_LIST): Replace "gdb/gnulib" by
 536         "gdb/gnulib/import".
 537
 538 2013-06-21  Will Newton  <will.newton@linaro.org>
 539
 540         * doublest.c (ldfrexp): Remove function.
 541         (convert_doublest_to_floatformat): Call frexpl instead of
 542         ldfrexp.
 543
 544 2013-06-21  Will Newton  <will.newton@linaro.org>
 545
 546         * gnulib/update-gnulib.sh(IMPORTED_GNULIB_MODULES): Add frexpl.
 547         * gnulib/aclocal.m4: Regenerate.
 548         * gnulib/config.in: Regenerate.
 549         * gnulib/configure: Regenerate.
 550         * gnulib/import/Makefile.am: Update.
 551         * gnulib/import/Makefile.in: Update.
 552         * gnulib/import/m4/gnulib-cache.m4: Update.
 553         * gnulib/import/m4/gnulib-comp.m4: Update.
 554         * gnulib/import/float+.h: Import.
 555         * gnulib/import/float.c: Import.
 556         * gnulib/import/float.in.h: Import.
 557         * gnulib/import/fpucw.h: Import.
 558         * gnulib/import/frexp.c: Import.
 559         * gnulib/import/frexpl.c: Import.
 560         * gnulib/import/isnan.c: Import.
 561         * gnulib/import/isnand-nolibm.h: Import.
 562         * gnulib/import/isnand.c: Import.
 563         * gnulib/import/isnanl-nolibm.h: Import.
 564         * gnulib/import/isnanl.c: Import.
 565         * gnulib/import/itold.c: Import.
 566         * gnulib/import/m4/exponentd.m4: Import.
 567         * gnulib/import/m4/exponentl.m4: Import.
 568         * gnulib/import/m4/float_h.m4: Import.
 569         * gnulib/import/m4/fpieee.m4: Import.
 570         * gnulib/import/m4/frexp.m4: Import.
 571         * gnulib/import/m4/frexpl.m4: Import.
 572         * gnulib/import/m4/isnand.m4: Import.
 573         * gnulib/import/m4/isnanl.m4: Import.
 574         * gnulib/import/m4/math_h.m4: Import.
 575         * gnulib/import/math.c: Import.
 576         * gnulib/import/math.in.h: Import.
 577
 578 2013-06-21  Jan Kratochvil  <jan.kratochvil@redhat.com>
 579
 580         * common/linux-btrace.c (cpu_supports_btrace): Remove variable vendor,
 581         replace strcmp with signature_INTEL_ebx, signature_INTEL_ecx and
 582         signature_INTEL_edx comparisons.
 583
 584 2013-06-20  Doug Evans  <dje@google.com>
 585
 586         symtab/15652
 587         * dwarf2read.c (try_open_dwop_file): New arg search_cwd.
 588         All callers updated.
 589         (open_dwp_file): If we can't find the dwp file, search the basename
 590         in debug-file-directory.
 591
 592         * dwarf2read.c (struct dwp_file): Fix comment.
 593         (open_and_init_dwp_file): Set dwp_file->name to bfd's file name.
 594
 595         * source.c (openp): Document OPF_TRY_CWD_FIRST+OPF_SEARCH_IN_PATH
 596         better.
 597
 598 2013-06-20  Yao Qi  <yao@codesourcery.com>
 599
 600         * breakpoint.c (create_breakpoint): Fix code indentation.
 601
 602 2013-06-20  Yao Qi  <yao@codesourcery.com>
 603
 604         * breakpoint.c (create_breakpoints_sal_default): Remove
 605         parameter 'lsal'.  Update declaration.
 606         (bkpt_create_breakpoints_sal): Caller update.
 607         (tracepoint_create_breakpoints_sal): Likewise.
 608
 609 2013-06-20  Pedro Alves  <pedro@codesourcery.com>
 610             Yao Qi  <yao@codesourcery.com>
 611
 612         * NEWS: Mention the new option '--skip-unavailable' of command
 613         -data-list-register-values.
 614         * mi/mi-main.c (mi_cmd_data_list_register_values): Accept the
 615         --skip-unavailable option.  Adjust to use output_register.
 616         (output_register): Add new 'skip_unavailable' parameter.
 617         Handle it.
 618
 619 2013-06-19  Mike Frysinger  <vapier@gentoo.org>
 620
 621         * Makefile.in (HFILES_NO_SRCDIR): Add common/i386-cpuid.h and
 622         common/i386-gcc-cpuid.h.
 623         * common/i386-cpuid.h: New wrapper header around i386-gcc-cpuid.h.
 624         * common/i386-gcc-cpuid.h: Rename from testsuite/gdb.arch/i386-cpuid.h.
 625         Copy the latest version from upstream gcc.
 626         * common/linux-btrace.c: Include i386-cpuid.h.
 627         (intel_supports_btrace): Delete x86 ifdefs and replace inline asm with
 628         call to i386_cpuid.
 629         (cpu_supports_btrace): Likewise.
 630         * go32-nat.c: Include i386-cpuid.h.
 631         (go32_sysinfo): Add (disabled) calls to i386_cpuid with comments.
 632
 633 2013-06-19  Doug Evans  <dje@google.com>
 634
 635         * symfile.c (symfile_bfd_open): Delete unnecessary declaration.
 636         (get_section_index): Ditto.
 637
 638 2013-06-19  Tom Tromey  <tromey@redhat.com>
 639
 640         * breakpoint.c (_initialize_breakpoint): Remove trailing \n from
 641         "dprintf" help.
 642
 643 2013-06-18  Doug Evans  <dje@google.com>
 644
 645         * dwarf2read.c (dw2_symtab_iter_next): Check value of cu_index
 646         before using it.
 647         (dw2_expand_symtabs_matching): Fix symbol kind validity check.
 648         Move test of cu_index closer to use.  Print complaint if cu_index
 649         is bad.
 650
 651 2013-06-18  Joel Brobecker  <brobecker@adacore.com>
 652
 653         * machoread.c (oso_vector): Delete this global.
 654         (macho_register_oso): Add new parameter "oso_vector_ptr".
 655         Use it instead of the "oso_vector" global.
 656         (macho_symtab_read, macho_symfile_read_all_oso): Likewise.
 657         (macho_symfile_read): Use a local oso_vector, to be free'ed
 658         at the end of this function, in place of the old "oso_vector"
 659         global.  Update various function calls accordingly.  Use one
 660         single cleanup chain for the entire function.
 661
 662 2013-06-18  Joel Brobecker  <brobecker@adacore.com>
 663
 664         * dwarf2read.c (dwarf2_per_objfile_free): Replace uses of
 665         DWARF2_PER_OBJFILE by uses of DATA instead.
 666
 667 2013-06-18  Tom Tromey  <tromey@redhat.com>
 668
 669         * break-catch-sig.c (signal_catchpoint_explains_signal): Add 'sig'
 670         argument.
 671         * breakpoint.c (bpstat_explains_signal): Add 'sig' argument.
 672         Special case signals other than GDB_SIGNAL_TRAP.
 673         (explains_signal_watchpoint): New function.
 674         (base_breakpoint_explains_signal): Add 'sig' argument.
 675         (initialize_breakpoint_ops): Set 'explains_signal' method for
 676         watchpoints.
 677         * breakpoint.h (struct breakpoint_ops) <explains_signal>: Add
 678         signal argument.
 679         (bpstat_explains_signal): Likewise.
 680         * infrun.c (handle_syscall_event, handle_inferior_event): Update.
 681
 682 2013-06-18  Tom Tromey  <tromey@redhat.com>
 683
 684         * python/py-inferior.c (gdbpy_selected_inferior): Don't incref.
 685
 686 2013-06-18  Tom Tromey  <tromey@redhat.com>
 687
 688         * python/python.c (finish_python_initialization): Decref
 689         'pythondir' on failure path as well.
 690
 691 2013-06-18  Tom Tromey  <tromey@redhat.com>
 692
 693         PR symtab/15391:
 694         * dwarf2loc.c (read_pieced_value): Truncate this_size_bits
 695         after taking bits_to_skip into account.  Sign extend byte_offset.
 696         * utils.h (gdb_sign_extend): Declare.
 697         * utils.c (gdb_sign_extend): New function.
 698
 699 2013-06-18  Jan Kratochvil  <jan.kratochvil@redhat.com>
 700
 701         * dwarf2read.c (write_psymtabs_to_index): Ignore NULL PSYMTAB.
 702
 703 2013-06-17  Pierre Muller  <muller@sourceware.org>
 704
 705         * corelow.c (core_open): Print GDB signal name instead of target
 706         signal number.
 707
 708 2013-06-17  Mike Frysinger  <vapier@gentoo.org>
 709
 710         * .gitignore: Add /gcore.
 711
 712 2013-06-13  Doug Evans  <dje@google.com>
 713
 714         * dwarf2read.c (try_open_dwop_file): Work around behaviour of
 715         OPF_TRY_CWD_FIRST to not search path if the file contains a '/'.
 716
 717 2013-06-12  Phil Muldoon  <pmuldoon@redhat.com>
 718
 719         * stack.c (backtrace_command_1): Fix indentation.
 720
 721 2013-06-11  Joel Brobecker  <brobecker@adacore.com>
 722
 723         * window-nat.c (thread_rec): Add missing empty line after
 724         local variable declaration.
 725
 726 2013-06-11  Joel Brobecker  <brobecker@adacore.com>
 727
 728         * windows-nat.c (thread_rec): Revert format used to print
 729         error code returned by SuspendThread from %d back to %u.
 730
 731 2013-06-11  Joel Brobecker  <brobecker@adacore.com>
 732
 733         * windows-nat.c (windows_continue): Add "0x" prefix for thread
 734         ID in debug trace.
 735         (get_windows_debug_event): Likewise, for all debug traces.
 736
 737 2013-06-11  Joel Brobecker  <brobecker@adacore.com>
 738
 739         * window-nat.c (thread_rec): Add thread ID in SuspendThread
 740         warning message.
 741
 742 2013-06-08  Pedro Alves  <pedro@codesourcery.com>
 743             Yao Qi  <yao@codesourcery.com>
 744
 745         * mi/mi-main.c (get_register): Remove declaration.
 746         (output_register): Declare.
 747         (mi_cmd_data_list_register_values): Remove local variable
 748         'tuple_cleanup'.  Move some code into output_register.
 749         (get_register): Renamed to ...
 750         (output_register): ... this.  Output the register's
 751         "number" ui_out tuple here.
 752
 753 2013-06-07  Pedro Alves  <palves@redhat.com>
 754
 755         * darwin-nat.c: Fix formating in copyright header.
 756         * darwin-nat.h: Likewise.
 757         * gnu-nat.c: Likewise.
 758         * machoread.c: Likewise.
 759
 760 2013-06-07  Pedro Alves  <palves@redhat.com>
 761
 762         PR server/14823
 763         * regformats/regdat.sh: Output #include tdesc.h.  Make globals
 764         static.  Output a global target description pointer.
 765         (init_registers_${name}): Adjust to initialize a
 766         target description structure.
 767
 768 2013-06-07  Will Newton  <will.newton@linaro.org>
 769
 770         * printcmd.c (build_address_symbolic): Call
 771         gdbarch_addr_bits_remove for text minimal symbols.
 772
 773 2013-06-07  Will Newton  <will.newton@linaro.org>
 774
 775         * MAINTAINERS: Add myself to Write After Approval.
 776
 777 2013-06-07  Yao Qi  <yao@codesourcery.com>
 778
 779         * tracepoint.c (start_tracing): Move code to ...
 780         (trace_reset_local_state): ... here.  New.
 781         (disconnect_tracing): Don't call set_current_traceframe,
 782         set_tracepoint_num, and set_traceframe_context. Call
 783         trace_reset_local_state instead.
 784         (tfile_close): Call trace_reset_local_state.
 785         * ctf.c (ctf_close): Likewise.
 786         * remote.c (remote_close): Likewise.
 787         * tracepoint.h (trace_reset_local_state): Declare.
 788
 789 2013-06-06  Doug Evans  <dje@google.com>
 790
 791         * dwarf2read.c: Whitespace fixes for DWP file format documentation,
 792         and fix header docs.
 793
 794 2013-06-05  Doug Evans  <dje@google.com>
 795             Keith Seitz  <keiths@redhat.com>
 796
 797         PR 15519
 798         * cp-namespace.c (find_symbol_in_baseclass): Call
 799         cp_lookup_symbol_in_namespace instead of cp_lookup_symbol_namespace.
 800         Check result of call to lookup_symbol_static.
 801         Call lookup_static_symbol_aux unconditionally.
 802         Call check_typedef on base types before accessing them.
 803         (cp_lookup_nested_symbol): Fix comment.
 804
 805 2013-06-05  Luis Machado  <lgustavo@codesourcery.com>
 806
 807         * gnu-v3-abi.c (gnuv3_skip_trampoline): Handle thunk
 808         minimal symbols pointing to function descriptors.
 809
 810 2013-06-05  Tom Tromey  <tromey@redhat.com>
 811
 812         * python/py-utils.c (gdb_pymodule_addobject): Cast away const.
 813
 814 2013-06-04  Sergio Durigan Junior  <sergiodj@redhat.com>
 815             Pedro Alves  <palves@redhat.com>
 816
 817         * remote.c (remote_wait_as): Restore signal handler before returning
 818         when GDB gets a notification.
 819
 820 2013-06-04  Gary Benson  <gbenson@redhat.com>
 821
 822         PR 2328
 823         * breakpoint.h (handle_solib_event): Moved function declaration
 824         to solib.h.
 825         * breakpoint.c (handle_solib_event): Moved function to solib.c.
 826         (bpstat_stop_status): Pass new argument to handle_solib_event.
 827         * solib.h (update_solib_breakpoints): New function declaration.
 828         (handle_solib_event): Moved function declaration from
 829         breakpoint.h.
 830         * solib.c (update_solib_breakpoints): New function.
 831         (handle_solib_event): Moved function from breakpoint.c.
 832         Updated to call solib_ops->handle_event if not NULL.
 833         * solist.h (target_so_ops): New fields "update_breakpoints" and
 834         "handle_event".
 835         * infrun.c (set_stop_on_solib_events): New function.
 836         (_initialize_infrun): Use the above for "set
 837         stop-on-solib-events".
 838         (handle_inferior_event): Pass new argument to handle_solib_event.
 839         * solib-svr4.c (probe.h): New include.
 840         (svr4_free_library_list): New forward declaration.
 841         (probe_action): New enum.
 842         (probe_info): New struct.
 843         (probe_info): New static variable.
 844         (NUM_PROBES): New definition.
 845         (svr4_info): New fields "using_xfer", "probes_table" and
 846         "solib_list".
 847         (free_probes_table): New function.
 848         (free_solib_list): New function.
 849         (svr4_pspace_data_cleanup): Free probes table and solib list.
 850         (svr4_copy_library_list): New function.
 851         (svr4_current_sos_via_xfer_libraries): New parameter "annex".
 852         (svr4_read_so_list): New parameter "prev_lm".
 853         (svr4_current_sos_direct): Renamed from "svr4_current_sos".
 854         (svr4_current_sos): New function.
 855         (probe_and_action): New struct.
 856         (hash_probe_and_action): New function.
 857         (equal_probe_and_action): Likewise.
 858         (register_solib_event_probe): Likewise.
 859         (solib_event_probe_at): Likewise.
 860         (solib_event_probe_action): Likewise.
 861         (solist_update_full): Likewise.
 862         (solist_update_incremental): Likewise.
 863         (disable_probes_interface_cleanup): Likewise.
 864         (svr4_handle_solib_event): Likewise.
 865         (svr4_update_solib_event_breakpoint): Likewise.
 866         (svr4_update_solib_event_breakpoints): Likewise.
 867         (svr4_create_solib_event_breakpoints): Likewise.
 868         (enable_break): Free probes table before creating breakpoints.
 869         Use svr4_create_solib_event_breakpoints to create breakpoints.
 870         (svr4_solib_create_inferior_hook): Free the solib list.
 871         (_initialize_svr4_solib): Initialise
 872         svr4_so_ops.handle_solib_event and svr4_so_ops.update_breakpoints.
 873
 874 2013-06-04  Gary Benson  <gbenson@redhat.com>
 875
 876         * target.h (target_ops): New field
 877         "to_augmented_libraries_svr4_read".
 878         (target_augmented_libraries_svr4_read): New macro.
 879         * target.c (update_current_target): Handle
 880         to_augmented_libraries_svr4_read.
 881         * remote.c (remote_state): New field
 882         "augmented_libraries_svr4_read".
 883         (remote_augmented_libraries_svr4_read_feature): New function.
 884         (remote_protocol_features): Add entry for
 885         "augmented-libraries-svr4-read".
 886         (remote_augmented_libraries_svr4_read): New function.
 887         (init_remote_ops): Initialize
 888         remote_ops.to_augmented_libraries_svr4_read.
 889
 890 2013-06-04  Gary Benson  <gbenson@redhat.com>
 891
 892         * NEWS: Update.
 893
 894 2013-06-04  Gary Benson  <gbenson@redhat.com>
 895
 896         * objfiles.h (inhibit_section_map_updates): New function
 897         declaration.
 898         (resume_section_map_updates): Likewise.
 899         (resume_section_map_updates_cleanup): Likewise.
 900         * objfiles.c (objfile_pspace_info): Removed field
 901         "objfiles_changed_p".  New fields "new_objfiles_available",
 902         "section_map_dirty" and "inhibit_updates".
 903         (allocate_objfile): Set new_objfiles_available.
 904         (free_objfile): Set section_map_dirty.
 905         (objfile_relocate1): Likewise.
 906         (in_plt_section): Likewise.
 907         (find_pc_section): Update the conditions under which the
 908         section map will be updated.
 909         (inhibit_section_map_updates): New function.
 910         (resume_section_map_updates): Likewise.
 911         (resume_section_map_updates_cleanup): Likewise.
 912
 913 2013-06-04  Gary Benson  <gbenson@redhat.com>
 914
 915         * probe.h (get_probe_argument_count): New declaration.
 916         (evaluate_probe_argument): Likewise.
 917         * probe.c (get_probe_argument_count): New function.
 918         (evaluate_probe_argument): Likewise.
 919         (probe_safe_evaluate_at_pc): Use the above new functions.
 920
 921 2013-06-04  Alan Modra  <amodra@gmail.com>
 922
 923         * ppc-tdep.h (ppc_insns_match_pattern): Update prototype.
 924         * rs6000-tdep.c (read_insn): Add frame param, don't assume big-endian.
 925         (ppc_insns_match_pattern): Add frame param.  Avoid multiple
 926         target mem reads on optional insns.
 927         * ppc-linux-tdep.c (ppc_skip_trampoline_code): Update
 928         ppc_insns_match_pattern calls.
 929         * ppc64-tdep.c (ppc64_standard_linkage2, ppc64_standard_linkage3):
 930         Add match for power7 thread safety insns, and new order of
 931         std 2,40(1) insn.  Correct code shown for _dl_runtime_resolve
 932         invocation in comment, and update rest of comment.
 933         (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN,
 934         PPC64_STANDARD_LINKAGE3_LEN): Delete.
 935         (ppc64_standard_linkage2_target): Update insn offsets.
 936         (ppc64_skip_trampoline_code): Use a single insn buffer.  Match newer
 937         stubs first.  Update calls.
 938
 939 2013-06-04  Yao Qi  <yao@codesourcery.com>
 940
 941         * solib.c (solib_find): Don't need dir separator if path has
 942         drive spec.
 943
 944 2013-06-03  Joel Brobecker  <brobecker@adacore.com>
 945
 946         Revert (indirectly causes a SIGSEGV):
 947         * machoread.c (macho_symfile_read): Assign first cleanup to
 948         'back_to'.
 949
 950 2013-06-03  Yao Qi  <yao@codesourcery.com>
 951
 952         * mi/mi-cmd-var.c (mi_no_values, mi_simple_values): Move to
 953         mi-parse.c.  Make them static.
 954         (mi_all_values): Likewise.
 955         (mi_parse_values_option): Move to mi-parse.c.  Rename it to
 956         mi_parse_print_values.  Make it external.
 957         * mi/mi-cmds.h (mi_no_values, mi_simple_values, mi_all_values):
 958         Remove the declarations.
 959         * mi/mi-parse.c (mi_parse_print_values): Moved from mi-cmd-var.c.
 960         * mi/mi-parse.h (mi_parse_print_values): Declare.
 961         * mi/mi-cmd-stack.c: Include mi-parse.h.
 962         (parse_print_values): Remove
 963         (mi_cmd_stack_list_locals): Call mi_parse_print_values instead
 964         of parse_print_values.
 965         (mi_cmd_stack_list_args, mi_cmd_stack_list_variables): Likewise.
 966
 967 2013-05-31  Pedro Alves  <pedro@codesourcery.com>
 968             Yao Qi  <yao@codesourcery.com>
 969
 970         * tracepoint.c (all_tracepoint_actions_and_cleanup): Declare.
 971         (encode_actions): Move code to ...
 972         (all_tracepoint_actions_and_cleanup): ... here.  New.
 973         (trace_dump_command): Likewise.
 974
 975 2013-05-30  Tom Tromey  <tromey@redhat.com>
 976
 977         * symmisc.c (maintenance_expand_symtabs): Call do_cleanups.
 978
 979 2013-05-30  Tom Tromey  <tromey@redhat.com>
 980
 981         * xml-support.c (gdb_xml_create_parser_and_cleanup): Rename from
 982         gdb_xml_create_parser_and_cleanup_1.  Return a cleanup.  Remove
 983         'old_chain' argument.  Add 'parser_result' argument.
 984         (gdb_xml_create_parser_and_cleanup): Remove old version.
 985         (gdb_xml_parse_quick): Update.
 986         (xml_process_xincludes): Update.
 987         * xml-support.h (gdb_xml_create_parser_and_cleanup): Don't
 988         declare.
 989
 990 2013-05-30  Tom Tromey  <tromey@redhat.com>
 991
 992         * probe.c (collect_probes): Check arguments for NULL before
 993         calling compile_rx_or_error.
 994         * utils.c (compile_rx_or_error): Require 'rx' to be non-NULL.
 995         Remove NULL return.
 996
 997 2013-05-30  Tom Tromey  <tromey@redhat.com>
 998
 999         * infrun.c (adjust_pc_after_break): Introduce an outer null
1000         cleanup.
1001
1002 2013-05-30  Tom Tromey  <tromey@redhat.com>
1003
1004         * mi/mi-cmd-var.c (varobj_update_one): Add an outer null cleanup.
1005
1006 2013-05-30  Tom Tromey  <tromey@redhat.com>
1007
1008         * cli/cli-script.c (read_command_lines_1): Use a null cleanup
1009         for 'old_chain'.  Do not check 'head' before processing
1010         cleanups.
1011
1012 2013-05-30  Tom Tromey  <tromey@redhat.com>
1013
1014         * mi/mi-cmd-stack.c (list_arg_or_local): Remove
1015         "cleanup_tuple".
1016
1017 2013-05-30  Tom Tromey  <tromey@redhat.com>
1018
1019         * dbxread.c (dbx_read_symtab): Declare 'back_to' in a more
1020         inner scope.  Unconditionally call do_cleanups.
1021
1022 2013-05-30  Tom Tromey  <tromey@redhat.com>
1023
1024         * source.c (find_and_open_source): Call do_cleanups.
1025
1026 2013-05-30  Tom Tromey  <tromey@redhat.com>
1027
1028         * linux-thread-db.c (thread_db_load_search): Unconditionally
1029         call do_cleanups.
1030
1031 2013-05-30  Tom Tromey  <tromey@redhat.com>
1032
1033         * solib-aix.c (solib_aix_bfd_open): Don't use a null cleanup
1034         for 'cleanup'; instead use a later one.
1035
1036 2013-05-30  Tom Tromey  <tromey@redhat.com>
1037
1038         * python/py-breakpoint.c (bppy_get_commands): Use
1039         explicit, unconditional return.
1040         * python/py-frame.c (frapy_read_var): Likewise.
1041         * python/python.c (gdbpy_decode_line): Likewise.
1042
1043 2013-05-30  Tom Tromey  <tromey@redhat.com>
1044
1045         * cp-namespace.c (cp_lookup_symbol_imports_or_template): Call
1046         do_cleanups on all return paths.
1047
1048 2013-05-30  Tom Tromey  <tromey@redhat.com>
1049
1050         * top.c (execute_command): Discard 'cleanup_if_error' cleanups.
1051
1052 2013-05-30  Tom Tromey  <tromey@redhat.com>
1053
1054         * stabsread.c (read_struct_type): Call do_cleanups along
1055         all return paths.
1056
1057 2013-05-30  Maciej W. Rozycki  <macro@codesourcery.com>
1058
1059         * mips-linux-tdep.c: Adjust formatting throughout.
1060
1061 2013-05-30  Tom Tromey  <tromey@redhat.com>
1062
1063         * mipsread.c (read_alphacoff_dynamic_symtab): Call do_cleanups
1064         along all return paths.
1065
1066 2013-05-30  Tom Tromey  <tromey@redhat.com>
1067
1068         * symfile.c (find_separate_debug_file): Call do_cleanups
1069         along all return paths.
1070
1071 2013-05-30  Tom Tromey  <tromey@redhat.com>
1072
1073         * symtab.c (search_symbols): Introduce a null cleanup for
1074         'retval_chain'.
1075
1076 2013-05-30  Tom Tromey  <tromey@redhat.com>
1077
1078         * python/py-value.c (valpy_binop): Call do_cleanups before
1079         exiting loop.
1080
1081 2013-05-30  Tom Tromey  <tromey@redhat.com>
1082
1083         * python/py-prettyprint.c (print_children): Remove extra
1084         do_cleanups call.
1085
1086 2013-05-30  Tom Tromey  <tromey@redhat.com>
1087
1088         * python/py-frame.c (frapy_read_var): Call do_cleanups along
1089         all return paths.
1090
1091 2013-05-30  Tom Tromey  <tromey@redhat.com>
1092
1093         * python/py-breakpoint.c (bppy_get_commands): Call do_cleanups
1094         along all return paths.
1095
1096 2013-05-30  Tom Tromey  <tromey@redhat.com>
1097
1098         * cli/cli-logging.c (set_logging_redirect): Unconditionally
1099         call do_cleanups.
1100
1101 2013-05-30  Tom Tromey  <tromey@redhat.com>
1102
1103         * varobj.c (c_value_of_root): Call do_cleanups along all
1104         return paths.
1105
1106 2013-05-30  Tom Tromey  <tromey@redhat.com>
1107
1108         * tracepoint.c (trace_dump_command): Unconditionally call
1109         do_cleanups.
1110
1111 2013-05-30  Tom Tromey  <tromey@redhat.com>
1112
1113         * breakpoint.c (output_thread_groups, parse_cmd_to_aexpr): Call
1114         do_cleanups earlier.
1115
1116 2013-05-30  Tom Tromey  <tromey@redhat.com>
1117
1118         * machoread.c (macho_symfile_read): Assign first cleanup to
1119         'back_to'.
1120
1121 2013-05-30  Tom Tromey  <tromey@redhat.com>
1122
1123         * m32r-rom.c (m32r_load): Call do_cleanups at all returns.
1124
1125 2013-05-30  Tom Tromey  <tromey@redhat.com>
1126
1127         * mi/mi-main.c (list_available_thread_groups): Call do_cleanups.
1128
1129 2013-05-30  Tom Tromey  <tromey@redhat.com>
1130
1131         * inf-ptrace.c (inf_ptrace_create_inferior): Unconditionally
1132         call discard_cleanups.
1133         (inf_ptrace_attach): Likewise.
1134
1135 2013-05-30  Tom Tromey  <tromey@redhat.com>
1136
1137         * remote-mips.c (mips_exit_debug): Call do_cleanups on all
1138         return paths.
1139         (mips_initialize): Likewise.
1140         (common_open): Call do_cleanups.
1141
1142 2013-05-30  Tom Tromey  <tromey@redhat.com>
1143
1144         * utils.c (internal_vproblem): Call do_cleanups.
1145
1146 2013-05-30  Tom Tromey  <tromey@redhat.com>
1147
1148         * linespec.c (find_linespec_symbols): Don't reassign to 'cleanup'.
1149
1150 2013-05-30  Tom Tromey  <tromey@redhat.com>
1151
1152         * cli/cli-script.c (setup_user_args): Don't return after error.
1153
1154 2013-05-30  Tom Tromey  <tromey@redhat.com>
1155
1156         * somread.c (som_symtab_read): Call do_cleanups.
1157
1158 2013-05-30  Tom Tromey  <tromey@redhat.com>
1159
1160         * printcmd.c (print_command_1): Unconditionally call do_cleanups.
1161
1162 2013-05-30  Tom Tromey  <tromey@redhat.com>
1163
1164         * cli/cli-cmds.c (cd_command, alias_command): Call do_cleanups.
1165         * cli/cli-dump.c (restore_binary_file): Call do_cleanups.
1166         * interps.c (interpreter_exec_cmd): Call do_cleanups.
1167         * source.c (show_substitute_path_command): Call do_cleanups.
1168         (unset_substitute_path_command, set_substitute_path_command):
1169         Likewise.
1170         * symfile.c (load_command): Call do_cleanups.
1171
1172 2013-05-30  Tom Tromey  <tromey@redhat.com>
1173
1174         * contrib/cleanup_check.py: New file.
1175         * contrib/gcc-with-excheck: Add option parsing.
1176
1177 2013-05-30  Joel Brobecker  <brobecker@adacore.com>
1178
1179         * windows-nat.c (windows_delete_thread): Add missing space
1180         in cast expression.
1181
1182 2013-05-30  Hafiz Abid Qadeer  <abidh@codesourcery.com>
1183
1184         * inferior.c (top level): Include tilde.h.
1185         (add_inferior_command): Call tilde_expand on the value of 'exec'
1186         argument.
1187
1188 2013-05-30  Pedro Alves  <pedro@codesourcery.com>
1189             Yao Qi  <yao@codesourcery.com>
1190
1191         * tracepoint.c (encode_actions_1): Remove parameter 't'.
1192         Caller update.
1193         (encode_actions): Likewise.
1194         * remote.c (remote_download_tracepoint): Caller update.
1195         * tracepoint.h (encode_actions): Update declaration.
1196
1197 2013-05-30  Pedro Alves  <palves@redhat.com>
1198
1199         * python/python-internal.h (gdb_Py_DECREF): Cast OP to PyObject
1200         pointer.
1201
1202 2013-05-30  Yao Qi  <yao@codesourcery.com>
1203
1204         * remote.c (remote_check_symbols): Remove unused parameter
1205         'objfile'.
1206         Declaration update.
1207         (remote_start_remote, remote_new_objfile): Caller update.
1208
1209 2013-05-30  Yao Qi  <yao@codesourcery.com>
1210
1211         * mi/mi-cmds.c (mi_cmds): Define MI command
1212         '-exec-arguments' by macro DEF_MI_CMD_CLI_1 instead of
1213         DEF_MI_CMD_CLI.
1214
1215 2013-05-29  Pedro Alves  <palves@redhat.com>
1216
1217         * remote.c (remote_insert_breakpoint, remote_remove_breakpoint)
1218         (remote_insert_watchpoint, remote_remove_watchpoint)
1219         (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
1220         (remote_verify_memory, compare_sections_command)
1221         (remote_search_memory): Set the general process/thread on the
1222         remote side.
1223
1224 2013-05-29  Pedro Alves  <palves@redhat.com>
1225
1226         * aarch64-tdep.c: Don't include "features/aarch64-without-fpu.c".
1227         (_initialize_aarch64_tdep): Don't call
1228         initialize_tdesc_aarch64_without_fpu.
1229         * features/Makefile (WHICH): Remove reference to
1230         aarch64-without-fpu.
1231         * features/aarch64-without-fpu.c: Delete file.
1232         * regformats/aarch64-without-fpu.dat: Delete file.
1233
1234 2013-05-28  Yao Qi  <yao@codesourcery.com>
1235
1236         * tracepoint.c (stringify_collection_list): Remove parameter
1237         'string'.
1238         (encode_actions): Caller update.  Remove local variables.
1239
1240 2013-05-24  Yao Qi  <yao@codesourcery.com>
1241
1242         * tracepoint.c (TFILE_PID): Remove.
1243         (tfile_open): Don't add thread and inferior.
1244         (tfile_close): Don't set 'inferior_ptid'.  Don't call
1245         exit_inferior_silent.
1246         (tfile_thread_alive): Remove.
1247         (init_tfile_ops): Don't set field 'to_thread_alive' of
1248         tfile_ops.
1249
1250 2013-05-23  Doug Evans  <dje@google.com>
1251
1252         * contrib/cc-with-tweaks.sh (-p): Handle no dwo files.
1253
1254 2013-05-23  Pedro Alves  <palves@redhat.com>
1255
1256         * common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
1257         [HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
1258         (socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
1259         Only define if HAVE_SOCKETS is defined.
1260         * configure.ac: Check for sys/socket.h.
1261         * config.in, configure: Regenerate.
1262
1263 2013-05-23  Pedro Alves  <palves@redhat.com>
1264
1265         * dwarf2read.c (create_dwp_hash_table, create_dwo_in_dwp)
1266         (open_and_init_dwp_file): Use %s/pulongest instead of %u for
1267         printing uint32_t variables.
1268
1269 2013-05-23  Pedro Alves  <palves@redhat.com>
1270
1271         * NEWS: Mention GDBserver range stepping support.
1272
1273 2013-05-23  Yao Qi  <yao@codesourcery.com>
1274             Pedro Alves  <palves@redhat.com>
1275
1276         * gdbthread.h (struct thread_control_state) <may_range_step>: New
1277         field.
1278         * infcmd.c (step_once, until_next_command): Enable range stepping.
1279         * infrun.c (displaced_step_prepare): Disable range stepping.
1280         (resume): Disable range stepping if stepping over a breakpoint or
1281         we have software watchpoints.  If range stepping is enabled,
1282         assert the thread is in the stepping range.
1283         (clear_proceed_status_thread): Clear may_range_step.
1284         (handle_inferior_event): Disable range stepping as soon as we know
1285         the thread that hit the event.  Re-enable it whenever we're going
1286         to step with a step range.
1287         * remote.c (struct vCont_action_support) <r>: New field.
1288         (use_range_stepping): New global.
1289         (remote_vcont_probe): Handle 'r' action.
1290         (append_resumption): Append an 'r' action if the thread may range
1291         step.
1292         (show_range_stepping): New function.
1293         (set_range_stepping): New function.
1294         (_initialize_remote): Call add_setshow_boolean_cmd to register the
1295         'set range-stepping' and 'show range-stepping' commands.
1296         * NEWS: Mention range stepping, the new vCont;r action, and the
1297         new "set/show range-stepping" commands.
1298
1299 2013-05-23  Yao Qi  <yao@codesourcery.com>
1300             Pedro Alves  <palves@redhat.com>
1301
1302         * remote.c (struct vCont_action_support): New struct.
1303         (struct remote_state) <support_vCont_t>: Remove field.
1304         <vCont_actions_support>: New field.
1305         (remote_vcont_probe, remote_stop_ns): Update.
1306
1307 2013-05-23  Yao Qi  <yao@codesourcery.com>
1308             Pedro Alves  <palves@redhat.com>
1309
1310         * gdbthread.h (pc_in_thread_step_range): New declaration.
1311         * thread.c (pc_in_thread_step_range): New function.
1312         * infrun.c (handle_inferior_event): Use it.
1313
1314 2013-05-23  Joel Brobecker  <brobecker@adacore.com>
1315
1316         * mi/mi-cmd-break.c (mi_argv_to_format): Use xsnprintf instead
1317         of sprintf.
1318
1319 2013-05-22  Keith Seitz  <keiths@redhat.com>
1320
1321         * ada-lang.c (is_known_support_routine): Add explicit free of
1322         'func_name' from find_frame_funname.
1323         (ada_unhandled_exception_name_addr_from_raise): Add cleanups
1324         for func_name from find_frame_funname.
1325         * python/py-frame.c (frapy_name): Add explicit free of
1326         'name' from find_frame_funname.
1327         * stack.c (find_frame_funname): Add comment explaining that
1328         funcp must be freed by the caller.
1329         Return copy of symbol names instead of pointers.
1330         (print_frame): Add a cleanup for 'funname' from
1331         find_frame_funname.
1332         * stack.h (find_frame_funname): Remove "const" from
1333         'funname' parameter.
1334
1335 2013-05-22  Tom Tromey  <tromey@redhat.com>
1336
1337         PR c++/15401:
1338         * c-valprint.c (c_value_print): Use value_addr for
1339         references.  Convert back to reference type with value_ref.
1340
1341 2013-05-22  Eli Zaretskii  <eliz@gnu.org>
1342
1343         * windows-nat.c (handle_unload_dll): Don't call solib_add for the
1344         unloaded DLL, it will be done by handle_solib_event.  See
1345         http://sourceware.org/ml/gdb-patches/2013-05/msg00713.html for the
1346         details.
1347
1348 2013-05-22  Phil Muldoon  <pmuldoon@redhat.com>
1349
1350         * ui-out.c: Create typedef ui_out_level_p and define vector
1351         operations for that type.
1352         (struct ui_out): Use a vector instead of an array.
1353         (current_level): Return level from a vector.
1354         (push_level): Create a level in a vector.
1355         (pop_level): Delete a level in a vector.
1356         (ui_out_new): Create initial level zero level, and store in a
1357         vector.
1358         (ui_out_destroy): Add vector cleanup.
1359
1360 2013-05-22  Pedro Alves  <palves@redhat.com>
1361
1362         * python/python-internal.h (gdb_Py_DECREF): Tag with
1363         "ARI: editCase function".
1364
1365 2013-05-21  Paul Pluzhnikov  <ppluzhnikov@google.com>
1366
1367         * solib-svr4.c (svr4_free_so): Protect against NULL dereference.
1368
1369 2013-05-21  Pedro Alves  <palves@redhat.com>
1370
1371         * python/py-prettyprint.c (apply_val_pretty_printer): Check
1372         whether PRINTER is NULL before installing a Py_DECREF cleanup.
1373         * python/py-utils.c (py_decref): Don't check for NULL before
1374         calling Py_DECREF.
1375
1376 2013-05-21  Pedro Alves  <palves@redhat.com>
1377
1378         * python/py-utils.c (py_decref): Remove extra braces.
1379         (gdb_pymodule_addobject): Remove extra braces.
1380         * python-internal.h (gdb_Py_DECREF): New static inline function.
1381         (Py_DECREF): Redefine as calling gdb_Py_DECREF.
1382
1383 2013-05-21  Philippe Waroquiers  <philippe.waroquiers@skynet.be>
1384
1385         * breakpoints.c (detach_breakpoints): Do not
1386         detach breakpoints locations with loc_type bp_loc_other.
1387
1388 2013-05-21  Jan Kratochvil  <jan.kratochvil@redhat.com>
1389
1390         Workaround Python 2.6.
1391         * python/py-utils.c (gdb_pymodule_addobject): Wrap Py_DECREF into
1392         a block.
1393
1394 2013-05-21  Jan Kratochvil  <jan.kratochvil@redhat.com>
1395
1396         Code cleanup: constification.
1397         * solib.c (solib_ops): Make return type and ops variable type const.
1398         (set_solib_ops): Make the new_ops parameter and ops variable const.
1399         (solib_find, solib_map_sections, clear_so, free_so, update_solib_list)
1400         (solib_add, solib_keep_data_in_core, clear_solib)
1401         (solib_create_inferior_hook, in_solib_dynsym_resolve_code)
1402         (reload_shared_libraries, solib_global_lookup): Make the ops variable
1403         const.
1404         * solib.h (set_solib_ops): Make the new_ops parameter const.
1405
1406 2013-05-21  Joel Brobecker  <brobecker@adacore.com>
1407
1408         * data-directory/Makefile.in (SYSTEM_GDBINIT_SRCDIR): New
1409         variable.
1410         (VPATH): Add SYSTEM_GDBINIT_SRCDIR.
1411         (SYSTEM_GDBINIT_DIR, SYSTEM_GDBINIT_INSTALL_DIR)
1412         (SYSTEM_GDBINIT_FILES): New variables.
1413         (all): Add stamp-system-gdbinit.
1414         (stamp-system-gdbinit): New rule.
1415         (clean-system-gdbinit, install-system-gdbinit)
1416         (uninstall-system-gdbinit): New rules.  Make them .PHONY.
1417         (install-only): Add dependency on install-system-gdbinit.
1418         (uninstall): Add dependency on uninstall-system-gdbinit.
1419         (clean): Add dependency on clean-system-gdbinit.
1420         * system-gdbinit/elinos.py: New file.
1421         * system-gdbinit/wrs-linux.py: New file.
1422
1423 2013-05-21  Joel Brobecker  <brobecker@adacore.com>
1424
1425         * ada-lang.c (old_renaming_is_invisible): Fix cleanup leak.
1426
1427 2013-05-21  Hui Zhu  <hui@codesourcery.com>
1428
1429         * breakpoint.c (dprintf_breakpoint_ops): Remove its static.
1430         * breakpoint.h (dprintf_breakpoint_ops): Add extern.
1431         * mi/mi-cmd-break.c (ctype.h): New include.
1432         (gdb_obstack.h): New include.
1433         (mi_argv_to_format, mi_cmd_break_insert_1): New.
1434         (mi_cmd_break_insert): Call mi_cmd_break_insert_1.
1435         (mi_cmd_dprintf_insert): New.
1436         * mi/mi-cmds.c (mi_cmds): Add "dprintf-insert".
1437         * mi/mi-cmds.h (mi_cmd_dprintf_insert): New extern.
1438
1439 2013-05-20  Tom Tromey  <tromey@redhat.com>
1440
1441         * python/py-prettyprint.c (search_pp_list): Decref 'attr'.
1442
1443 2013-05-20  Tom Tromey  <tromey@redhat.com>
1444
1445         * python/py-value.c (valpy_get_dynamic_type): Simplify
1446         dynamic_type assignment.  Use Py_XINCREF.
1447
1448 2013-05-20  Tom Tromey  <tromey@redhat.com>
1449
1450         * python/py-type.c (typy_fields): Unconditionally decref 'r'.
1451
1452 2013-05-20  Tom Tromey  <tromey@redhat.com>
1453
1454         * python/py-frame.c (frapy_older, frapy_newer, gdbpy_newest_frame)
1455         (gdbpy_selected_frame): Move object-construction code
1456         out of TRY_CATCH.
1457
1458 2013-05-20  Tom Tromey  <tromey@redhat.com>
1459
1460         * python/py-arch.c (gdbpy_initialize_arch): Use
1461         gdb_pymodule_addobject.
1462         * python/py-block.c (gdbpy_initialize_blocks): Use
1463         gdb_pymodule_addobject.
1464         * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Use
1465         gdb_pymodule_addobject.
1466         * python/py-cmd.c (gdbpy_initialize_breakpoints): Use
1467         gdb_pymodule_addobject.
1468         * python/py-event.c (gdbpy_initialize_event_generic): Use
1469         gdb_pymodule_addobject.
1470         * python/py-evtregistry.c (gdbpy_initialize_eventregistry): Use
1471         gdb_pymodule_addobject.
1472         * python/py-evts.c (add_new_registry): Use
1473         gdb_pymodule_addobject.
1474         (gdbpy_initialize_py_events): Likewise.
1475         * python/py-finishbreakpoint.c
1476         (gdbpy_initialize_finishbreakpoints): Use
1477         gdb_pymodule_addobject.
1478         * python/py-frame.c (gdbpy_initialize_frames): Use
1479         gdb_pymodule_addobject.
1480         * python/py-function.c (gdbpy_initialize_functions): Use
1481         gdb_pymodule_addobject.
1482         * python/py-inferior.c (gdbpy_initialize_inferior): Use
1483         gdb_pymodule_addobject.
1484         * python/py-infthread.c (gdbpy_initialize_thread): Use
1485         gdb_pymodule_addobject.
1486         * python/py-objfile.c (gdbpy_initialize_objfile): Use
1487         gdb_pymodule_addobject.
1488         * python/py-param.c (gdbpy_initialize_parameters): Use
1489         gdb_pymodule_addobject.
1490         * python/py-progspace.c (gdbpy_initialize_pspace): Use
1491         gdb_pymodule_addobject.
1492         * python/py-symbol.c (gdbpy_initialize_symbols): Use
1493         gdb_pymodule_addobject.
1494         * python/py-symtab.c (gdbpy_initialize_symtabs): Use
1495         gdb_pymodule_addobject.
1496         * python/py-type.c (gdbpy_initialize_types): Use
1497         gdb_pymodule_addobject.
1498         * python/py-utils.c (gdb_pymodule_addobject): New function.
1499         * python/py-value.c (gdbpy_initialize_values): Use
1500         gdb_pymodule_addobject.
1501         * python/python-internal.h (gdb_pymodule_addobject): Declare.
1502         * python/python.c (_initialize_python): Use
1503         gdb_pymodule_addobject.
1504
1505 2013-05-20  Tom Tromey  <tromey@redhat.com>
1506
1507         * python/py-cmd.c (cmdpy_completer): Use explicit decref.
1508         * python/py-param.c (get_set_value, get_show_value): Use
1509         explicit decrefs.
1510         * python/python.c (start_type_printers, apply_type_printers):
1511         Use explicit decrefs.
1512
1513 2013-05-20  Tom Tromey  <tromey@redhat.com>
1514
1515         * python/py-evts.c (gdbpy_initialize_py_events): Don't
1516         incref the module.
1517
1518 2013-05-20  Tom Tromey  <tromey@redhat.com>
1519
1520         * python/python.c (gdbpy_run_events): Decref the result
1521         of PyObject_CallObject.
1522
1523 2013-05-20  Tom Tromey  <tromey@redhat.com>
1524
1525         * python/py-symtab.c (set_sal): Use
1526         CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.  Return -1 on error.
1527         (symtab_and_line_to_sal_object): Update.
1528
1529 2013-05-20  Tom Tromey  <tromey@redhat.com>
1530
1531         * python/py-param.c (compute_enum_values): Decref 'item'.
1532
1533 2013-05-20  Tom Tromey  <tromey@redhat.com>
1534
1535         * mi/mi-main.c: Include python-internal.h.
1536         (mi_cmd_list_features): Check gdb_python_initialized.
1537         * python/py-inferior.c (python_on_normal_stop, python_on_resume)
1538         (python_inferior_exit, python_new_objfile, add_thread_object)
1539         (delete_thread_object, py_free_inferior): Check
1540         gdb_python_initialized.
1541         * python/py-prettyprint.c (apply_val_pretty_printer): Check
1542         gdb_python_initialized.
1543         * python/py-type.c (save_objfile_types): Check
1544         gdb_python_initialized.
1545         * python/python-internal.h (gdb_python_initialized): Declare.
1546         * python/python.c (ensure_python_env): Throw exception if
1547         Python not initialized.
1548         (before_prompt_hook, source_python_script_for_objfile)
1549         (start_type_printers, apply_type_printers,
1550         free_type_printers): Check gdb_python_initialized.
1551         * varobj.c (varobj_get_display_hint)
1552         (dynamic_varobj_has_child_method, update_dynamic_varobj_children)
1553         (install_new_value_visualizer, varobj_set_visualizer)
1554         (value_get_print_value): Check gdb_python_initialized.
1555
1556 2013-05-20  Tom Tromey  <tromey@redhat.com>
1557
1558         * python/py-arch.c (gdbpy_initialize_arch): Return 'int'.
1559         Check errors.
1560         * python/py-auto-load.c (gdbpy_initialize_auto_load): Return 'int'.
1561         * python/py-block.c (gdbpy_initialize_blocks): Return 'int'.
1562         Check errors.
1563         * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Return 'int'.
1564         Check errors.
1565         * python/py-cmd.c (gdbpy_initialize_commands): Return 'int'.
1566         Check errors.
1567         * python/py-event.c (gdbpy_initialize_event): Return 'int'.
1568         Check errors.
1569         * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Change generated
1570         init function to return 'int'.
1571         * python/py-evtregistry.c (gdbpy_initialize_eventregistry):
1572         Return 'int'.  Check errors.
1573         * python/py-evts.c (gdbpy_initialize_py_events): Return 'int'.
1574         Check errors.
1575         * python/py-finishbreakpoint.c (gdbpy_initialize_finishbreakpoints):
1576         Return 'int'.  Check errors.
1577         * python/py-frame.c (gdbpy_initialize_frames): Return 'int'.
1578         Check errors.
1579         * python/py-function.c (gdbpy_initialize_functions): Return 'int'.
1580         Check errors.
1581         * python/py-gdb-readline.c (gdbpy_initialize_gdb_readline):
1582         Check errors.
1583         * python/py-inferior.c (gdbpy_initialize_inferior): Return 'int'.
1584         Check errors.
1585         * python/py-infthread.c (gdbpy_initialize_thread): Return 'int'.
1586         Check errors.
1587         * python/py-lazy-string.c (gdbpy_initialize_lazy_string): Return 'int'.
1588         Check errors.
1589         * python/py-objfile.c (gdbpy_initialize_objfile): Return 'int'.
1590         Check errors.
1591         * python/py-param.c (gdbpy_initialize_parameters): Return 'int'.
1592         Check errors.
1593         * python/py-progspace.c (gdbpy_initialize_pspace): Return 'int'.
1594         Check errors.
1595         * python/py-symbol.c (gdbpy_initialize_symbols): Return 'int'.
1596         Check errors.
1597         * python/py-symtab.c (gdbpy_initialize_symtabs): Return 'int'.
1598         Check errors.
1599         * python/py-type.c (gdbpy_initialize_types): Return 'int'.
1600         Check errors.
1601         * python/py-value.c (gdbpy_initialize_values): Return 'int'.
1602         Check errors.
1603         * python/python-internal.h (gdbpy_initialize_auto_load,
1604         gdbpy_initialize_values, gdbpy_initialize_frames,
1605         gdbpy_initialize_symtabs, gdbpy_initialize_commands,
1606         gdbpy_initialize_symbols, gdbpy_initialize_symtabs,
1607         gdbpy_initialize_blocks, gdbpy_initialize_types,
1608         gdbpy_initialize_functions, gdbpy_initialize_pspace,
1609         gdbpy_initialize_objfile, gdbpy_initialize_breakpoints,
1610         gdbpy_initialize_finishbreakpoints,
1611         gdbpy_initialize_lazy_string, gdbpy_initialize_parameters,
1612         gdbpy_initialize_thread, gdbpy_initialize_inferior,
1613         gdbpy_initialize_eventregistry, gdbpy_initialize_event,
1614         gdbpy_initialize_py_events, gdbpy_initialize_stop_event,
1615         gdbpy_initialize_signal_event,
1616         gdbpy_initialize_breakpoint_event,
1617         gdbpy_initialize_continue_event,
1618         gdbpy_initialize_exited_event, gdbpy_initialize_thread_event,
1619         gdbpy_initialize_new_objfile_event, gdbpy_initialize_arch):
1620         Update.  Use CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
1621         * python/python.c (gdb_python_initialized): New global.
1622         (gdbpy_initialize_events): Return 'int'.  Check errors.
1623         (_initialize_python): Check errors.  Set
1624         gdb_python_initialized.
1625
1626 2013-05-20  Tom Tromey  <tromey@redhat.com>
1627
1628         * python/py-finishbreakpoint.c (bpfinishpy_out_of_scope):
1629         Decref the reslut of PyObject_CallMethod.
1630
1631 2013-05-20  Tom Tromey  <tromey@redhat.com>
1632
1633         * python/py-event.c (gdbpy_initialize_event_generic): Return
1634         early if PyType_Ready fails.
1635
1636 2013-05-20  Tom Tromey  <tromey@redhat.com>
1637
1638         * python/py-type.c (make_fielditem): Add gdb_assert_not_reached
1639         as 'default' in the switch.
1640
1641 2013-05-20  Tom Tromey  <tromey@redhat.com>
1642
1643         * python/py-inferior.c (gdbpy_inferiors): Update.  Hoist
1644         get_addr_from_python calls out of TRY_CATCH.
1645         (infpy_write_memory, infpy_search_memory): Likewise.
1646         * python/py-utils.c (get_addr_from_python): Return negative
1647         value on error.  Use TRY_CATCH.
1648         * python/python-internal.h (get_addr_from_python): Use
1649         CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
1650
1651 2013-05-20  Tom Tromey  <tromey@redhat.com>
1652
1653         * python/py-event.c (evpy_emit_event): Decref the
1654         result of PyObject_CallFunctionObjArgs.
1655
1656 2013-05-20  Tom Tromey  <tromey@redhat.com>
1657
1658         * python/py-cmd.c (cmdpy_completer): Use iterator protocol.
1659         Correctly decref.
1660
1661 2013-05-20  Tom Tromey  <tromey@redhat.com>
1662
1663         * python/py-cmd.c (cmdpy_init): Decref 'ds_obj'.
1664
1665 2013-05-20  Tom Tromey  <tromey@redhat.com>
1666
1667         * python/py-event.h (gdbpy_initialize_event_generic): Use
1668         CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
1669         * python/py-evts.c (add_new_registry): Use
1670         CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
1671         * python/python-internal.h
1672         (CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION): New macro.
1673
1674 2013-05-20  Tom Tromey  <tromey@redhat.com>
1675
1676         * python/py-arch.c (archpy_disassemble): Update.
1677         * python/py-type.c (typy_get_composite, typy_lookup_typename)
1678         (typy_lookup_type): Use GDB_PY_HANDLE_EXCEPTION.
1679         * python/py-utils.c (gdbpy_convert_exception): Return 'void'.
1680         * python/python-internal.h (CPYCHECKER_SETS_EXCEPTION): New
1681         macro.
1682         (GDB_PY_HANDLE_EXCEPTION): Update.
1683         (gdbpy_convert_exception): Update.  Use CPYCHECKER_SETS_EXCEPTION.
1684
1685 2013-05-20  Tom Tromey  <tromey@redhat.com>
1686
1687         * python/python-internal.h (events_object_type): Remove.
1688
1689 2013-05-20  Tom Tromey  <tromey@redhat.com>
1690
1691         * python/py-event.h (evpy_emit_event): Use
1692         CPYCHECKER_STEALS_REFERENCE_TO_ARG.
1693         * python/python-internal.h (CPYCHECKER_STEALS_REFERENCE_TO_ARG):
1694         New macro.
1695
1696 2013-05-20  Tom Tromey  <tromey@redhat.com>
1697
1698         * py-evtregistry.c (create_event_object): Decref
1699         eventregistry_object if PyList_New fails.
1700
1701 2013-05-20  Tom Tromey  <tromey@redhat.com>
1702
1703         * py-cmd.c (gdbpy_string_to_argv): Check result of
1704         PyList_New.
1705
1706 2013-05-20  Tom Tromey  <tromey@redhat.com>
1707
1708         * python/python.c (before_prompt_hook): Add cleanup to
1709         decref 'hook'.
1710
1711 2013-05-20  Tom Tromey  <tromey@redhat.com>
1712
1713         * python/py-function.c (fnpy_init): Decref result of
1714         PyObject_GetAttrString.
1715
1716 2013-05-20  Tom Tromey  <tromey@redhat.com>
1717
1718         * python/py-threadevent.c (get_event_thread): Use
1719         CPYCHECKER_RETURNS_BORROWED_REF.
1720         * python/python-internal.h (CPYCHECKER_RETURNS_BORROWED_REF):
1721         New define.
1722         (pspace_to_pspace_object, objfile_to_objfile_object)
1723         (find_thread_object): Use it.
1724
1725 2013-05-20  Tom Tromey  <tromey@redhat.com>
1726
1727         * python/py-arch.c (arch_object_type): Use
1728         CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1729         * python/py-block.c (block_syms_iterator_object_type):
1730         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1731         * python/py-bpevent.c (breakpoint_event_object_type):
1732         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1733         * python/py-cmd.c (cmdpy_object_type): Use
1734         CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1735         * python/py-continueevent.c (continue_event_object_type):
1736         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1737         * python/py-event.h (GDBPY_NEW_EVENT_TYPE):
1738         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1739         * python/py-events.h (thread_event_object_type):
1740         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1741         * python/py-evtregistry.c (eventregistry_object_type): Use
1742         CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1743         * python/py-exitedevent.c (exited_event_object_type):
1744         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1745         * python/py-finishbreakpoint.c (finish_breakpoint_object_type):
1746         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1747         * python/py-function.c (fnpy_object_type): Use
1748         CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1749         * python/py-inferior.c (inferior_object_type, membuf_object_type):
1750         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1751         * python/py-infthread.c (thread_object_type): Use
1752         CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1753         * python/py-lazy-string.c (lazy_string_object_type):
1754         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1755         * python/py-newobjfileevent.c (new_objfile_event_object_type):
1756         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1757         * python/py-objfile.c (objfile_object_type): Use
1758         CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1759         * python/py-param.c (parmpy_object_type):
1760         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1761         * python/py-progspace.c (pspace_object_type):
1762         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1763         * python/py-signalevent.c (signal_event_object_type):
1764         Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1765         * python/py-symtab.c (symtab_object_type, sal_object_type): Use
1766         CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1767         * python/py-type.c (type_object_type, field_object_type)
1768         (type_iterator_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1769         * python/py-internal.h (CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF): New
1770         define.
1771         (value_object_type, block_object_type, symbol_object_type)
1772         (event_object_type, stop_event_object_type, breakpoint_object_type)
1773         (frame_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
1774
1775 2013-05-20  Andreas Tobler  <andreas@fgznet.ch>
1776
1777         * Makefile.in (ALL_TARGET_OBS): Add ppcfbsd-tdep.o.
1778         (ALLDEPFILES): Add ppcfbsd-nat.c and ppcfbsd-tdep.c.
1779
1780 2013-05-20  Doug Evans  <dje@google.com>
1781
1782         When reading CU, stay in DWO.  Be more tolerent of bad debug info.
1783         For Fission.
1784         * dwarf2read.c (struct dwarf2_per_cu_data): New member
1785         reading_dwo_directly.
1786         (struct signatured_type): New member dwo_unit.
1787         (struct die_reader_specs): New member comp_dir.
1788         (create_signatured_type_table_from_index): Use malloc for
1789         all_type_units instead of objfile's obstack.
1790         (create_all_type_units): Ditto.
1791         (fill_in_sig_entry_from_dwo_entry): New function.
1792         (add_type_unit): New function.
1793         (lookup_dwo_signatured_type): New function.
1794         (lookup_dwp_signatured_type): New function.
1795         (lookup_signatured_type): New arg cu.  All callers updated.
1796         (init_cu_die_reader): Initialize comp_dir.
1797         (read_cutu_die_from_dwo): New arg stub_comp_dir.  All callers updated.
1798         Change assert of matching type signatures to call error on mismatch.
1799         (lookup_dwo_unit): Add assert.
1800         (init_tu_and_read_dwo_dies): New function.
1801         (init_cutu_and_read_dies): Call it.
1802         (build_type_unit_groups): Handle case of no type unit groups created.
1803         (hash_dwo_file, eq_dwo_file): Handle missing comp_dir.
1804         (lookup_dwo_cutu): Tweak complaint.
1805         (dwarf2_free_abbrev_table): Check for NULL abbrev_table.
1806         (dwarf2_per_objfile_free): Free all_type_units.
1807
1808 2013-05-20  Joel Brobecker  <brobecker@adacore.com>
1809
1810         * windows-nat.c (handle_unload_dll): Add missing empty line.
1811
1812 2013-05-20  Joel Brobecker  <brobecker@adacore.com>
1813
1814         * dwarf2read.c (prototyped_function_p): New function.
1815         (read_subroutine_type): Use it.
1816
1817 2013-05-20  Joel Brobecker  <brobecker@adacore.com>
1818
1819         * rs6000-aix-tdep.c: De-indent some example code provided
1820         as a comment.
1821
1822 2013-05-17  Edjunior Machado  <emachado@linux.vnet.ibm.com>
1823
1824         * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Check if the
1825         region is ok for a hardware watchpoint using the new ptrace interface
1826         on Power servers.
1827
1828 2013-05-17  Doug Evans  <dje@google.com>
1829
1830         * NEWS: Mention new maintenance commands check-symtabs, and
1831         expand-symtabs, and renamed check-psymtabs.
1832         * psymtab.c (maintenance_check_psymtabs): Renamed from
1833         maintenance_check_symtabs.  Only process already-expanded symbol
1834         tables.
1835         (_initialize_psymtab): Update.
1836         * symmisc.c (maintenance_check_symtabs): New function.
1837         (maintenance_expand_name_matcher): New function
1838         (maintenance_expand_file_matcher): New function
1839         (maintenance_expand_symtabs): New function.
1840         (_initialize_symmisc): Add "mt check-symtabs" and "mt expand-symtabs"
1841         commands.
1842
1843 2013-05-17  Tom Tromey  <tromey@redhat.com>
1844
1845         * python/py-inferior.c (infpy_read_memory): Don't call
1846         PyErr_SetString if PyObject_New fails.
1847         * python/py-frame.c (frame_info_to_frame_object): Don't call
1848         PyErr_SetString if PyObject_New fails.
1849
1850 2013-05-17  Pavel Chupin  <pavel.v.chupin@intel.com>
1851
1852         * acinclude.m4: Add check for dlopen in libdl.
1853         * configure.ac: Ditto.
1854         * configure: Regenerate.
1855
1856 2013-05-17  Phil Muldoon  <pmuldoon@redhat.com>
1857
1858         * frame.c (frame_stash): Convert to htab.
1859         (frame_addr_hash): New function.
1860         (frame_addr_hash_eq): New function.
1861         (frame_stash_create): Convert function to create
1862         a hash table.
1863         (frame_stash_add): Convert function to add an entry to a hash
1864         table.
1865         (frame_stash_find): Convert function to search the hash table.
1866         (frame_stash_invalidate): Convert function to empty the hash
1867         table.
1868         (get_frame_id): Only add to stash if a frame_id is created.
1869         (_initialize_frame): Call frame_stash_create.
1870
1871 2013-05-16  Yue Lu  <hacklu.newborn@gmail.com>  (tiny change)
1872
1873         * configure.ac: Ensure MIG is available when building for GNU Hurd
1874         hosts.
1875         * configure: Regenerate.
1876
1877 2013-05-16  Joel Brobecker  <brobecker@adacore.com>
1878
1879         * dwarf2read.c (set_cu_language): Add DW_LANG_UPC handling.
1880
1881 2013-05-16  Joel Brobecker  <brobecker@adacore.com>
1882
1883         * ada-lang.c (ada_make_symbol_completion_list): Make sure
1884         all cleanups are done before returning from this function.
1885
1886 2013-05-15  Joel Brobecker  <brobecker@adacore.com>
1887
1888         * utils.h: #include "exceptions.h".
1889         (enum errors): Remove partial declaration.
1890
1891 2013-05-15  Joel Brobecker  <brobecker@adacore.com>
1892
1893         * gdbarch.sh (core_xfer_shared_libraries_aix): New method.
1894         * gdbarch.h, gdbarch.c: Regenerate.
1895         * corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX
1896         handling.
1897
1898         * rs6000-aix-tdep.h: New file.
1899         * Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h.
1900         * rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and
1901         "xml-utils.h".
1902         (struct field_info, struct ld_info_desc): New types.
1903         (ld_info32_desc, ld_info64_desc): New static constants.
1904         (struct ld_info): New type.
1905         (rs6000_aix_extract_ld_info): New function.
1906         (rs6000_aix_shared_library_to_xml): Likewise.
1907         (rs6000_aix_ld_info_to_xml): Likewise.
1908         (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
1909         (rs6000_aix_init_osabi): Add call to
1910         set_gdbarch_core_xfer_shared_libraries_aix.
1911         * rs6000-nat.c: Add "rs6000-aix-tdep.h" include.
1912         Remove "xml-utils.h" include.
1913         (LdInfo): Delete typedef.
1914         (ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME):
1915         Delete macros.
1916         (rs6000_ptrace_ldinfo): Change return type to gdb_byte *.
1917         Adjust code accordingly.
1918         (rs6000_core_ldinfo): Delete, folded into
1919         rs6000_aix_core_xfer_shared_libraries_aix.
1920         (rs6000_xfer_shared_library): Delete.
1921         (rs6000_xfer_shared_libraries): Reimplement.
1922
1923 2013-05-15  Markus Metzger  <markus.t.metzger@intel.com>
1924
1925         * record.c (record_goto_cmdlist): New.
1926         (cmd_record_goto): Split into this ...
1927         (cmd_record_goto_begin): ... this
1928         (cmd_record_goto_end): ... and this.
1929         (_initialize_record): Change "record goto" to prefix command.
1930         Add commands for "record goto begin" and "record goto end".
1931         Add an alias for "record goto start" to "record goto begin".
1932
1933 2013-05-14  Jan Kratochvil  <jan.kratochvil@redhat.com>
1934
1935         * linespec.c (convert_linespec_to_sals): New comment for
1936         SOURCE_FILENAME assignment.
1937
1938 2013-05-14  Jan Kratochvil  <jan.kratochvil@redhat.com>
1939
1940         * cleanups.c (restore_my_cleanups): Replace gdb_assert by
1941         internal_warning.
1942
1943 2013-05-14  Tom Tromey  <tromey@redhat.com>
1944
1945         * eval.c (parse_and_eval_long): Make 'exp' const.
1946         * value.h (parse_and_eval_long): Update.
1947
1948 2013-05-14  Tom Tromey  <tromey@redhat.com>
1949
1950         * ui-file.c (gdb_fopen): Make arguments const.
1951         * ui-file.h (gdb_fopen): Make arguments const.
1952
1953 2013-05-14  Tom Tromey  <tromey@redhat.com>
1954
1955         * remote.c (remote_set_trace_notes): Make arguments const.
1956         * target.c (update_current_target): Update cast.
1957         * target.h (to_set_trace_notes): Make arguments const.
1958
1959 2013-05-14  Tom Tromey  <tromey@redhat.com>
1960
1961         * go32-nat.c (go32_terminal_info): Make 'args' const.
1962         * inferior.h (child_terminal_info): Update.
1963         * inflow.c (child_terminal_info): Make 'args' const.
1964         * target.c (default_terminal_info): Make 'args' const.
1965         (debug_to_terminal_save_ours): Likewise.
1966         * target.h (struct target_ops) <to_terminal_info>: Make argument
1967         const.
1968
1969 2013-05-13  Tom Tromey  <tromey@redhat.com>
1970
1971         * gcore.c (create_gcore_bfd): Make 'filename' const.
1972         * gcore.h (create_gcore_bfd): Make 'filename' const.
1973         * record-full.c (record_full_save): Make 'recfilename' const.
1974         * target.c (target_save_record): Make 'filename' const.
1975         * target.h (struct target_ops) <to_save_record>: Make 'filename'
1976         const.
1977         (target_save_record): Likewise.
1978
1979 2013-05-13  Tom Tromey  <tromey@redhat.com>
1980
1981         PR gdb/15338:
1982         * dwarf2read.c (dwarf2_record_block_ranges): Ensure that the
1983         ranges section has been read.
1984
1985 2013-05-13  Tom Tromey  <tromey@redhat.com>
1986
1987         PR exp/15364:
1988         * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
1989         STRUCTOP_PTR>: Return a not_lval value for
1990         EVAL_AVOID_SIDE_EFFECTS.
1991         * opencl-lang.c (evaluate_subexp_opencl): Return a not_lval value
1992         for EVAL_AVOID_SIDE_EFFECTS.
1993
1994 2013-05-13  Joel Brobecker  <brobecker@adacore.com>
1995
1996         * rs6000-aix-tdep.c (rs6000_push_dummy_call): Convert
1997         floating point registers to register type before storing
1998         value.
1999         * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call):
2000         Likewise.
2001
2002 2013-05-10  Joel Brobecker  <brobecker@adacore.com>
2003             Tom Tromey  <tromey@redhat.com>
2004
2005         * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
2006         New functions.
2007         * common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
2008         Declare.
2009         * darwin-nat.c (darwin_pre_ptrace): Use mark_fd_no_cloexec.
2010         (darwin_ptrace_him): Use unmark_fd_no_cloexec.
2011         * inf-ttrace.c (do_cleanup_pfds): Use unmark_fd_no_cloexec.
2012         (inf_ttrace_prepare): Use mark_fd_no_cloexec.
2013
2014 2013-05-10  Freddie Chopin  <freddie_chopin@op.pl>
2015             Tom Tromey  <tromey@redhat.com>
2016
2017         PR build/15414:
2018         * configure: Rebuild.
2019         * configure.ac (build_warnings): Do not use -Wformat-nonliteral
2020         with -Wno-format.
2021
2022 2013-05-10  Pedro Alves  <palves@redhat.com>
2023
2024         * remote.c (_initialize_remote): Fix spelling of
2025         qXfer:traceframe-info:read packet in packet config command.
2026
2027 2013-05-10  David Taylor  <dtaylor@emc.com>
2028
2029         PR remote/15455
2030
2031         * remote.c (remote_trace_set_readonly_regions): Do not overwrite
2032         "QTro" at start of packet.
2033
2034 2013-05-10  Joel Brobecker  <brobecker@adacore.com>
2035
2036         * solib-aix.c (solib_aix_relocate_section_addresses):
2037         For the .bss section action, apply the same offset as
2038         the .data section.
2039
2040 2013-05-10  Joel Brobecker  <brobecker@adacore.com>
2041
2042         * solib-aix.c (solib_aix_relocate_section_addresses):
2043         Remove FIXME comment.
2044
2045 2013-05-10  Joel Brobecker  <brobecker@adacore.com>
2046
2047         PR tdep/15420:
2048         * sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
2049         New functions, directly copied from sparc-sol-thread.c.
2050         * sparc-sol-thread.c: Delete.
2051         * configure.ac: Remove code handling sparc-solaris-thread.c.
2052         * configure: Regenerate.
2053
2054 2013-05-10  Phil Muldoon  <pmuldoon@redhat.com>
2055
2056         * stack.c (backtrace_command_1): Add "no-filters", and Python frame
2057         filter logic.
2058         (backtrace_command): Add "no-filters" option parsing.
2059         (_initialize_stack): Alter help to reflect "no-filters" option.
2060         * Makefile.in (SUBDIR_PYTHON_OBS): Add py-framefilter.o
2061         (SUBDIR_PYTHON_SRCS): Add py-framefilter.c
2062         (py-frame.o): Add target
2063         * data-directory/Makefile.in (PYTHON_DIR): Add Python frame
2064         filter files.
2065         * python/python.h: Add new frame filter constants, and flag enum.
2066         (apply_frame_filter): Add definition.
2067         * python/python.c (apply_frame_filter): New non-Python
2068         enabled function.
2069         * python/py-utils.c (py_xdecref): New function.
2070         (make_cleanup_py_xdecref): Ditto.
2071         * python/py-objfile.c: Declare frame_filters dictionary.
2072         (objfpy_dealloc): Add frame_filters dealloc.
2073         (objfpy_new): Initialize frame_filters attribute.
2074         (objfile_to_objfile_object): Ditto.
2075         (objfpy_get_frame_filters): New function.
2076         (objfpy_set_frame_filters): New function.
2077         * python/py-progspace.c: Declare frame_filters dictionary.
2078         (pspy_dealloc): Add frame_filters dealloc.
2079         (pspy_new): Initialize frame_filters attribute.
2080         (pspacee_to_pspace_object): Ditto.
2081         (pspy_get_frame_filters): New function.
2082         (pspy_set_frame_filters): New function.
2083         * python/py-framefilter.c: New file.
2084         * python/lib/gdb/command/frame_filters.py: New file.
2085         * python/lib/gdb/frames.py: New file.
2086         * python/lib/gdb/__init__.py: Initialize global frame_filters
2087         dictionary
2088         * python/lib/gdb/FrameDecorator.py: New file.
2089         * python/lib/gdb/FrameIterator.py: New file.
2090         * mi/mi-cmds.c (mi_cmds): Add frame filters command.
2091         * mi/mi-cmds.h: Declare.
2092         * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Add
2093         --no-frame-filter logic, and Python frame filter logic.
2094         (stack_enable_frame_filters): New function.
2095         (parse_no_frame_option): Ditto.
2096         (mi_cmd_stack_list_frames): Add --no-frame-filter and Python frame
2097         filter logic.
2098         (mi_cmd_stack_list_locals): Ditto.
2099         (mi_cmd_stack_list_args): Ditto.
2100         (mi_cmd_stack_list_variables): Ditto.
2101         * NEWS: Add frame filter note.
2102
2103 2013-05-09  Doug Evans  <dje@google.com>
2104
2105         * symfile.c (syms_from_objfile_1): Delete args offsets, num_offsets.
2106         All callers updated.
2107         (syms_from_objfile): Ditto.  Make static.
2108         (symbol_file_add_with_addrs): Renamed from
2109         symbol_file_add_with_addrs_or_offsets.  Delete args offsets,
2110         num_offsets.  All callers updated.
2111         * symfile.h (syms_from_objfile): Delete.
2112
2113         * symfile.c (decrement_reading_symtab): Add assert.
2114         (increment_reading_symtab): Ditto.
2115
2116 2013-05-09  Joel Brobecker  <brobecker@adacore.com>
2117
2118         * source.c (forward_search_command): Replace call to getc
2119         by call to fgetc.
2120         (reverse_search_command): Likewise.
2121
2122 2013-05-08  Doug Evans  <dje@google.com>
2123
2124         * psymtab.c (expand_symtabs_matching_via_partial): Fix file name
2125         matching test.
2126
2127 2013-05-08  Joel Brobecker  <brobecker@adacore.com>
2128
2129         * sol-thread.c (info_cb): Factorize the code a little.
2130
2131 2013-05-08  Joel Brobecker  <brobecker@adacore.com>
2132
2133         * sol-thread.c (info_cb): Rework the output of the "maintenance
2134         info sol-threads" command a bit.
2135
2136 2013-05-08  Joel Brobecker  <brobecker@adacore.com>
2137
2138         * sol-thread.c (info_cb) [ti.ti_state == TD_THR_SLEEP]:
2139         Replace ti.ti_startfunc by ti.ti_pc.
2140
2141 2013-05-08  Joel Brobecker  <brobecker@adacore.com>
2142
2143         * solib-aix.c (solib_aix_free_library_list): New function
2144         for the case where HAVE_LIBEXPAT is not defined.
2145
2146 2013-05-07  Sergio Durigan Junior  <sergiodj@redhat.com>
2147
2148         PR breakpoints/15413:
2149         * breakpoint.c (condition_completer): Simplify the code to
2150         disconsider multiple locations of breakpoints when completing the
2151         "condition" command.
2152
2153 2013-05-07  Pierre Muller  <muller@sourceware.org>
2154
2155         * common/linux-btrace.c: ARI fix: Include "gdb_wait.h"
2156         instead of <sys/wait.h>.
2157
2158 2013-05-07  Pierre Muller  <muller@sourceware.org>
2159
2160         * nios2-tdep.c (nios2_dwarf_reg_to_regnum): ARI fix: remove
2161         trailing new line from warning message.
2162
2163 2013-05-07  Pierre Muller  <muller@sourceware.org>
2164
2165         * contrib/ari/gdb_ari.sh (SOLIB_ADD, SOLIB_CREATE_INFERIOR_HOOK)
2166         (PC_SOLIB): Change type from ari_deprecate to ari_regression.
2167
2168 2013-05-07  Joel Brobecker  <brobecker@adacore.com>
2169
2170         * rs6000-nat.c (rs6000_core_ldinfo): Remove '\n' at end of
2171         error message (ARI fix).
2172
2173 2013-05-07  Joel Brobecker  <brobecker@adacore.com>
2174
2175         * features/library-list-aix.dtd: Replace library-list by
2176         library-list-aix.
2177         * rs6000-nat.c: Replace library-list by library-list-aix
2178         throughout.
2179         * solib-aix.c: Likewise.
2180
2181 2013-05-07  Joel Brobecker  <brobecker@adacore.com>
2182
2183         * target.h (enum target_object) [TARGET_OBJECT_LIBRARIES_AIX]:
2184         Renames TARGET_OBJECT_AIX_LIBRARIES.
2185         * rs6000-nat.c: Replace TARGET_OBJECT_AIX_LIBRARIES with
2186         TARGET_OBJECT_LIBRARIES_AIX throughout.
2187         * solib-aix.c: Likwise.
2188
2189 2013-05-07  Yao Qi  <yao@codesourcery.com>
2190
2191         * solib-dsbt.c (struct dsbt_info) <enable_break2_done>: Remove.
2192         (get_dsbt_info, enable_break, dsbt_clear_solib): Update.
2193
2194 2013-05-07  Yao Qi  <yao@codesourcery.com>
2195
2196         * solib-dsbt.c (enable_break): Declare.
2197         (dsbt_current_sos): Remove call to enable_break2.
2198         (enable_break2): Rename to enable_break.  Set solib breakpoint
2199         on '_dl_debug_state'.
2200         (enable_break): Remove.
2201
2202 2013-05-07  Luis Machado  <lgustavo@codesourcery.com>
2203
2204         * ppc-linux-nat.c (ppc_linux_new_thread): Clear the new thread's
2205         debug state prior to replicating existing hardware watchpoints or
2206         breakpoints.
2207
2208 2013-05-07  Jan Kratochvil  <jan.kratochvil@redhat.com>
2209
2210         * gcore.c (gcore_create_callback): Ignore sections with
2211         separate_debug_objfile_backlink != NULL.
2212
2213 2013-05-06  Sandra Loosemore  <sandra@codesourcery.com>
2214             Andrew Jenner  <andrew@codesourcery.com>
2215             Chung-Lin Tang  <cltang@codesourcery.com>
2216             Julian Brown  <julian@codesourcery.com>
2217
2218         Based on the nios2-elf port from Altera Corporation.
2219
2220         * Makefile.in (ALL_TARGET_OBS): Add nios2-tdep.o and
2221         nios2-linux-tdep.o.
2222         (HFILES_NO_SRCDIR): Add nios2-tdep.h.
2223         (ALLDEPFILES): Add nios2-tdep.c and nios2-linux-tdep.c.
2224         * configure.tgt: Add nios2*-*-linux* and nios2*-*-* targets.
2225         * nios2-tdep.h: New.
2226         * nios2-tdep.c: New.
2227         * nios2-linux-tdep.c: New.
2228         * features/Makefile (WHICH): Add nios2-linux.
2229         (nios2-linux-expedite): Set.
2230         * features/nios2-cpu.xml: New.
2231         * features/nios2.xml: New.
2232         * features/nios2-linux.xml: New.
2233         * features/nios2.c: New (autogenerated).
2234         * features/nios2-linux.c: New (autogenerated).
2235         * regformats/nios2-linux.dat: New (autogenerated).
2236         * NEWS (Changes since GDB 7.6): Add new Nios II targets
2237         and commands.
2238
2239 2013-05-06  Doug Evans  <dje@google.com>
2240
2241         * symfile.c: Whitespace cleanup.
2242
2243         * solist.h (struct target_so_ops): New member clear_so.
2244         * solib-svr4.c (svr4_clear_so): New function.
2245         (_initialize_svr4_solib): Set svr4_so_ops.clear_so.
2246         * solib.c (clear_so): Renamed from free_so_symbols.
2247         All callers updated.  Call target clear_so if it exists.
2248
2249 2013-05-06  Tom Tromey  <tromey@redhat.com>
2250
2251         * ada-lang.c (ada_value_primitive_packed_val): Don't
2252         call value_incref.
2253         * value.c (set_value_parent): Incref the new parent and decref
2254         the old parent.
2255         (value_copy, value_primitive_field): Use set_value_parent.
2256
2257 2013-05-06  Tom Tromey  <tromey@redhat.com>
2258
2259         * dwarf2loc.c (invalid_synthetic_pointer): Move earlier.
2260         (indirect_pieced_value): Call dwarf2_fetch_constant_bytes
2261         if needed.
2262         * dwarf2loc.h (dwarf2_fetch_constant_bytes): Declare.
2263         * dwarf2read.c (write_constant_as_bytes)
2264         (dwarf2_fetch_constant_bytes): New functions.
2265
2266 2013-05-06  Tom Tromey  <tromey@redhat.com>
2267
2268         * dwarf2read.c (dwarf2_const_value_data): Remove unused
2269         parameters.
2270         (dwarf2_const_value_attr): Update.
2271
2272 2013-05-06  Tom Tromey  <tromey@redhat.com>
2273
2274         * somread.c (som_symfile_offsets): Add 'const' to addrs.
2275         * machoread.c (macho_symfile_offsets): Add 'const' to addrs.
2276         * xcoffread.c (xcoff_symfile_offsets): Add 'const' to addrs.
2277         Remove declaration.
2278
2279 2013-05-06  Tom Tromey  <tromey@redhat.com>
2280
2281         * dwarf2read.c (dwarf2_const_value_attr): Use 'obstack', not
2282         objfile's obstack.
2283
2284 2013-05-06  Doug Evans  <dje@google.com>
2285
2286         * dbxread.c (process_one_symbol): Constify section_offsets parameter.
2287         * stabsread.h (process_one_symbol): Update declaration.
2288         * dwarf2read.c (dw2_relocate): Constify new_offsets, delta parameters.
2289         * elfread.c (elf_symfile_relocate_probe): Ditto.
2290         * psymtab.c (relocate_psymtabs): Ditto.
2291         * objfiles.c (objfile_relocate1): Constify new_offsets parameter.
2292         (objfile_relocate): Ditto.
2293         * objfiles.h (objfile_relocate): Update declaration.
2294         * symfile.c (relative_addr_info_to_section_offsets): Constify
2295         addrs parameter.
2296         (default_symfile_offsets): Ditto.
2297         (syms_from_objfile_1): Constify offsets parameter.
2298         (syms_from_objfile): Ditto.
2299         (symbol_file_add_with_addrs_or_offsets): Ditto.
2300         (symfile_map_offsets_to_segments): Constify data parameter.
2301         * symfile.h (struct quick_symbol_functions): Constify new_offsets,
2302         delta parameters of member relocate.
2303         (struct sym_probe_fns): Constify new_offsets,
2304         delta parameters of member sym_relocate_probe.
2305         (struct sym_fns): Constify section_addr_info parameter of member
2306         sym_offsets.
2307         (relative_addr_info_to_section_offsets): Update declaration.
2308         (default_symfile_offsets): Ditto.
2309         (syms_from_objfile): Ditto.
2310         (symfile_map_offsets_to_segments): Ditto.
2311
2312         * symfile.c (syms_from_objfile_1): Use correct section count when
2313         objfile->sf == NULL.
2314
2315 2013-05-06  Mike Frysinger  <vapier@gentoo.org>
2316
2317         * common/linux-btrace.c (intel_supports_btrace): Fix indentation.
2318
2319 2013-05-06  Doug Evans  <dje@google.com>
2320
2321         * psympriv.h (struct partial_symtab): Augment comment for member
2322         section_offsets.
2323
2324 2013-05-06  Joel Brobecker  <brobecker@adacore.com>
2325
2326         Reimplement shared library support on ppc-aix...
2327         * target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
2328         * features/library-list-aix.dtd: New file.
2329         * solib-aix.h, solib-aix.c: New file.
2330         * rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
2331         (rs6000_find_toc_address_hook): Delete.
2332         (rs6000_push_dummy_call): Rewrite code setting the TOC value.
2333         (rs6000_aix_init_osabi): Register solib_aix_so_ops.
2334         * rs6000-nat.c: Remove "xcoffsolib.h" include.  Include
2335         "xml-utils.h".
2336         (map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
2337         (vmap_symtab, fixup_breakpoints): Delete.
2338         (rs6000_xfer_shared_libraries): New function.
2339         (rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
2340         (vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
2341         (xcoff_relocate_symtab, xcoff_relocate_core): Delete.
2342         (rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
2343         (rs6000_xfer_shared_library): New function.
2344         (find_toc_address): Delete.
2345         (_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
2346         * rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
2347         * xcoffread.c (record_minimal_symbol): Reloate symbol address
2348         before creating minimal symbol.  Adjust function description
2349         accordingly.
2350         (scan_xcoff_symtab): Replace call to
2351         prim_record_minimal_symbol_and_info by call to
2352         record_minimal_symbol.
2353         (xcoff_symfile_offsets): Reimplement mostly as a wrapper
2354         around default_symfile_offsets.
2355         * configure.tgt: Add solib-aix.o to gdb_target_obs for
2356         powerpc-aix targets.
2357         * config/rs6000/nm-rs6000.h: Delete.
2358         * config/powerpc/aix.mh (NAT_FILE): Delete.
2359         (NATDEPFILES): Remove xcoffsolib.o.
2360         * Makefile.in (XMLFILES): Add library-list-aix.dtd.
2361         (ALL_TARGET_OBS): Add solib-aix.o.
2362         (HFILES_NO_SRCDIR): Remove xcoffsolib.h and
2363         config/rs6000/nm-rs6000.h.  Add solib-aix.h.
2364         (ALLDEPFILES): Add solib-aix.c.  Remove xcoffsolib.c.
2365         * xcoffsolib.h, xcoffsolib.c: Delete.
2366
2367         * solib.c (reload_shared_libraries): Remove reference to
2368         SOLIB_CREATE_INFERIOR_HOOK.
2369         * breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
2370         (disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
2371         (momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
2372         comment.
2373         * corelow.c (deprecated_core_resize_section_table): Delete.
2374         * exec.c: Remove include of xcoffsolib.h".
2375         (map_vmap, vmap): Delete.
2376         (exec_close_1): Remove references to vmap.
2377         (exec_file_attach): Remove vmap handling code, and reference
2378         to DEPRECATED_IBM6000_TARGET.
2379         (bfdsec_to_vmap): Delete.
2380         (exec_files_info): Remove block of code handling VMAP.
2381         * infcmd.c (post_create_inferior): Remove reference to
2382         SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
2383         * infrun.c (follow_exec): Remove reference to
2384         SOLIB_CREATE_INFERIOR_HOOK.
2385         * stack.c (print_frame): Remove reference to PC_SOLIB.
2386         * solib-dsbt.c (dsbt_current_sos): Adjust comment.
2387         (dsbt_relocate_main_executable): Likewise.
2388         * solib-frv.c (frv_current_sos): Likewise.
2389
2390 2013-05-06  Joel Brobecker  <brobecker@adacore.com>
2391
2392         * sol-thread.c (rw_common): Cast BUF to "gdb_byte *" in calls
2393         to target_write_memory and target_read_memory.
2394
2395 2013-05-06  Joel Brobecker  <brobecker@adacore.com>
2396
2397         * darwin-nat.c (darwin_setup_fake_stop_event): New function.
2398         (darwin_attach): Adjust using darwin_setup_fake_stop_event.
2399
2400 2013-05-06  Joel Brobecker  <brobecker@adacore.com>
2401
2402         * darwin-nat.c: Replace all "%x" instances in format strings
2403         into "0x%x" throughout.
2404
2405 2013-05-06  Joel Brobecker  <brobecker@adacore.com>
2406
2407         * darwin-nat.c (darwin_mourn_inferior): Replace call to
2408         gdb_assert by call to MACH_CHECK_ERROR.
2409         (darwin_attach_pid): Raise an error rather than a failed
2410         assertion when various system calls failed.  Report a warning
2411         instead of raising a failed assertion when PREV_NOT is not NULL
2412         after call to mach_port_request_notification.
2413         (darwin_ptrace_me): Raise an error rather than a failed
2414         assertion when read returns nonzero.
2415
2416 2013-05-06  Joel Brobecker  <brobecker@adacore.com>
2417
2418         * amd64-darwin-tdep.c: Remove #include "gdb_assert.h".
2419
2420 2013-05-05  Jan Kratochvil  <jan.kratochvil@redhat.com>
2421
2422         * cleanups.c (restore_my_cleanups): New gdb_assert for SENTINEL_CLEANUP.
2423
2424 2013-05-05  Jan Kratochvil  <jan.kratochvil@redhat.com>
2425
2426         * event-top.c (display_gdb_prompt): Call missing do_cleanups.
2427         * infcmd.c (get_return_value) <!stop_regs>: Do not overwrite CLEANUP.
2428         * symfile.c (symfile_bfd_open): New variable back_to.  Do not leave
2429         a stale cleanup.  Fix double free of NAME.
2430
2431 2013-05-04  Eli Zaretskii  <eliz@gnu.org>
2432
2433         * windows-nat.c (windows_delete_thread): Accept an additional
2434         argument, the thread's exit code, and announce thread death when
2435         print_thread_events is non-zero and we are deleting a thread that
2436         is not the main thread.
2437         (get_windows_debug_event): Pass thread exit code to
2438         windows_delete_thread.
2439
2440 2013-05-03  Kevin Buettner  <kevinb@redhat.com>
2441
2442         * v850-tdep.c (elf-bfd.h, elf/v850.h): Include.
2443         (R_149_REGNUM, E_NUM_OF_V850E2_REGS, E_SELID_1_R0_REGNUM)
2444         (E_SELID_1_R31_REGNUM, E_SELID_2_R0_REGNUM, E_SELID_2_R31_REGNUM)
2445         (E_SELID_3_R0_REGNUM, E_SELID_3_R31_REGNUM, E_SELID_4_R0_REGNUM)
2446         (E_SELID_4_R31_REGNUM, E_SELID_5_R0_REGNUM, E_SELID_5_R31_REGNUM)
2447         (E_SELID_6_R0_REGNUM, E_SELID_6_R31_REGNUM, E_SELID_7_R0_REGNUM, E_SELID_7_R31_REGNUM)
2448         (E_VR0_REGNUM, E_VR31_REGNUM, E_NUM_OF_V850E3V5_REGS): Define.
2449         (v850_abi, V850_ABI_GCC, V850_ABI_RH850): New enum and constants.
2450         (gdbarch_tdep): New struct.
2451         (v850e2_register_name): Use E_NUM_OF_V850E2_REGS instead of
2452         E_NUM_REGS.
2453         (v850e3v5_register_name): New function.
2454         (v850_register_type): v850e3v5 vector registers are 64-bits wide.
2455         (v850_use_struct_convention): Add `gdbarch' parameter.  Add new
2456         code handling the struct return conventions for the RH850 ABI.
2457         Update all callers.
2458         (v850_eight_byte_align_p): New function.
2459         (v850_push_call_dummy): Push structs by value, not by reference
2460         for the RH850 ABI.  Add support for eight byte alignment.
2461         (v850_dbtrap_breakpoint_from_pc): New function.
2462         (v850_gdbarch_init): Add ABI detection code.  Register
2463         v850e3v5_register_name for the v850e3v5 architecture.  Set the
2464         number of registers for v850e3v5.  Register
2465         v850_dbtrap_breakpoint_from_pc as appropriate.
2466         (_initialize_gdbarch_init): Registration bfd_arch_v850_rh850.
2467
2468 2013-05-03  Doug Evans  <dje@google.com>
2469
2470         * objfiles.c (objfile_relocate): Use gdb_bfd_count_sections instead
2471         of bfd_count_sections.
2472         * solib-target.c (solib_target_relocate_section_addresses): Ditto.
2473         * symfile.c (default_symfile_offsets): Ditto.
2474         (syms_from_objfile_1): Ditto.  Make dummy addrs list an array of
2475         one entry, not bfd_count_sections entries.
2476
2477 2013-05-03  Kevin Buettner  <kevinb@redhat.com>
2478
2479         * rl78-tdep.c (rl78_register_reggroup_p): Include SP in the
2480         `save' and `restore' register groups.  Don't include SPL
2481         or SPH in these groups.
2482         (rl78_dwarf_reg_to_regnum):  Adjust mapping for
2483         RL78_PC_REGNUM.  Add mappings for RL78_PSW_REGNUM,
2484         RL78_ES_REGNUM, and RL78_CS_REGNUM.
2485         (rl78_gdbarch_init): Set `dwarf2_addr_size' to 4.  Invoke
2486         dwarf2_append_unwinders().
2487
2488 2013-05-03  Philippe Waroquiers  <philippe.waroquiers@skynet.be>
2489
2490         * break-catch-sig.c (signal_catchpoint_breakpoint_hit): Do not
2491         ignore SIGINT and SIGTRAP in case these internal signals are
2492         caught explicitely.
2493
2494 2013-05-01  Joel Brobecker  <brobecker@adacore.com>
2495
2496         * darwin-nat.c (darwin_read_write_inferior): Change types
2497         of parameters rdaddr and wraddr to "gdb_byte *". Change type
2498         of copy_count to "mach_msg_type_number_t".
2499         (darwin_read_dyld_info): Change type of parameter
2500         rdaddr to "gdb_byte *".
2501
2502 2013-05-01  Joel Brobecker  <brobecker@adacore.com>
2503
2504         * solib-ia64-hpux.c (ia64_hpux_read_dynamic_info): Change cast
2505         of &info->load_map from "char *" to "gdb_byte *".
2506
2507 2013-05-01  Joel Brobecker  <brobecker@adacore.com>
2508
2509         * ia64-tdep.c (ia64_access_fpreg): Change cast of val
2510         from "char *" to "gdb_byte *".
2511         (ia64_access_rse_fpreg, ia64_access_mem): Likewise.
2512
2513 2013-04-30  Doug Evans  <dje@google.com>
2514
2515         * dwarf2read.c (lookup_dwo_unit): Return NULL if DWO not found.
2516         (init_cutu_and_read_dies): Flag a complaint, not error, for bad
2517         DWO stub.  If DWO isn't found, just use stub.
2518         (lookup_dwo_cutu): Don't try DWO if there's a DWP file.
2519
2520         * dwarf2read.c (dw2_find_symbol_file): Initialize filename before
2521         calling init_cutu_and_read_dies.
2522
2523 2013-03-27  Walfred Tedeschi  <walfred.tedeschi@intel.com>
2524
2525         * target-descriptions.c (maint_print_c_tdesc_cmd):
2526         Add case to parse structures as register types and
2527         bitfields.
2528
2529 2013-04-30  Walfred Tedeschi  <walfred.tedeschi@intel.com>
2530
2531         * MAINTAINERS (Write After Approval): Add myself to the list.
2532
2533 2013-04-30  Joel Brobecker  <brobecker@adacore.com>
2534
2535         * sol-thread.c (rw_common): Change type of parameter "buf"
2536         to "gdb_byte *".
2537         (ps_pdwrite, ps_ptwrite): Cast parameter "buf" in call to
2538         rw_common to "gdb_byte *" instead of "char *".
2539
2540 2013-04-30  Joel Brobecker  <brobecker@adacore.com>
2541
2542         * sol-thread.c (info_cb) [ti.ti_startfunc != 0]: Change type
2543         of local variable msym to const struct bound_minimal_symbol.
2544         Adjust use accordingly.
2545         [ti.ti_state == TD_THR_SLEEP]: Likewise.
2546
2547 2013-04-30  Samuel Thibault  <samuel.thibault@gnu.org>
2548
2549         * i386gnu-nat.c (CREG_OFFSET): New macro.
2550         (creg_offset): New array.
2551         (CREG_ADDR): Use creg_offset instead of reg_offset.
2552
2553 2013-04-30  Joel Brobecker  <brobecker@adacore.com>
2554
2555         * mep-tdep.c (mep_write_pc): Delete.
2556         (mep_gdbarch_init): Remove call to set_gdbarch_write_pc.
2557         Add call to set_gdbarch_pc_regnum.
2558
2559 2013-04-30  Joel Brobecker  <brobecker@adacore.com>
2560
2561         * common/filestuff.c: Replace #include <dirent.h> by
2562         #include "gdb_dirent.h".
2563
2564 2013-04-30  Joel Brobecker  <brobecker@adacore.com>
2565
2566         * common/filestuff.c: Replace #include <sys/stat.h> by
2567         #include "gdb_stat.h".
2568
2569 2013-04-29  Pierre Muller  <muller@sourceware.org>
2570
2571         * dwarf2read.c (handle_DW_AT_stmt_list): Avoid ARI warning for
2572         editCase function rule.
2573         (get_DW_AT_signature_type): Likewise.
2574
2575 2013-04-29  Joel Brobecker  <brobecker@adacore.com>
2576
2577         * m32r-tdep.c (m32r_write_pc): Delete.
2578         (m32r_gdbarch_init): Remove call to set_gdbarch_write_pc.
2579         Add call to set_gdbarch_pc_regnum.
2580
2581 2013-04-29  Pierre Muller  <muller@sourceware.org>
2582
2583         * ./contrib/ari/gdb_ari.sh (editCase rule): Fix spelling error.
2584
2585 2013-04-29  Joel Brobecker  <brobecker@adacore.com>
2586
2587         * dwarf2read.c (get_DW_AT_signature_type): Add ARI marker.
2588
2589 2013-04-28  Yao Qi  <yao@codesourcery.com>
2590
2591         * solib-dsbt.c (fetch_loadmap): Re-indent.
2592         (displacement_from_map, enable_break2): Likewise.
2593         (dsbt_relocate_section_addresses): Likewise.
2594
2595 2013-04-26  Joel Brobecker  <brobecker@adacore.com>
2596
2597         GDB 7.6 released.
2598
2599 2013-04-25  Andreas Kaufmann  <Andreas.Kaufmann@synopsys.com>
2600
2601         PR corefiles/14983:
2602         * dwarf2read.c (process_full_comp_unit): Always create a static
2603         block.
2604
2605 2013-04-25  Hui Zhu  <hui@codesourcery.com>
2606
2607         * breakpoint.c (build_target_command_list): Change loc->cond_bytecode
2608         to loc->cmd_bytecode.
2609
2610 2013-04-24  Doug Evans  <dje@google.com>
2611
2612         * dwarf2read.c (setup_type_unit_groups): Fix comment.
2613
2614 2013-04-22  Keith Seitz  <keiths@redhat.com>
2615
2616         * tracepoint.c (trace_save):  Call the writer's start method.
2617
2618 2013-04-24  Muhammad Bilal  <mbilal@codesourcery.com>
2619
2620         PR gdb/10462
2621         * cli/cli-decode.c (lookup_command): Show an error if there is no space
2622         before argument.
2623
2624 2013-04-23  Tom Tromey  <tromey@redhat.com>
2625
2626         * common/filestuff.c: Check USE_WIN32API before including
2627         sys/socket.h.
2628         (HAVE_F_GETFD): New define.
2629         (mark_cloexec): Check HAVE_F_GETFD.
2630         (gdb_open_cloexec): Change 'mode' to unsigned long.
2631         (gdb_socketpair_cloexec): Check HAVE_SOCKETPAIR.
2632         (gdb_pipe_cloexec): Check HAVE_PIPE.
2633         * common/filestuff.h (gdb_open_cloexec): Change 'mode' to unsigned
2634         long.
2635
2636 2013-04-23  Hui Zhu  <hui@codesourcery.com>
2637
2638         PR gdb/15293
2639         * breakpoint.c (bpstat_what): Add BPSTAT_WHAT_SINGLE to bp_dprintf.
2640
2641 2013-04-23  Hui Zhu  <hui@codesourcery.com>
2642
2643         PR gdb/15165
2644         * breakpoint.c (dprintf_print_recreate): New.
2645         (save_breakpoints): Let it not save dprintf commands.
2646         (initialize_breakpoint_ops): Set dprintf_print_recreate.
2647
2648 2013-04-22  Tom Tromey  <tromey@redhat.com>
2649
2650         PR gdb/7912:
2651         * Makefile.in (SFILES): Add filestuff.c
2652         (COMMON_OBS): Add filestuff.o.
2653         (filestuff.o): New target.
2654         * auto-load.c (auto_load_objfile_script_1): Use
2655         gdb_fopen_cloexec.
2656         * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
2657         * cli/cli-cmds.c (shell_escape): Call close_most_fds.
2658         * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
2659         * common/agent.c (gdb_connect_sync_socket): Use
2660         gdb_socket_cloexec.
2661         * common/filestuff.c: New file.
2662         * common/filestuff.h: New file.
2663         * common/linux-osdata.c (linux_common_core_of_thread)
2664         (command_from_pid, commandline_from_pid, print_source_lines)
2665         (linux_xfer_osdata_shm, linux_xfer_osdata_sem)
2666         (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
2667         gdb_fopen_cloexec.
2668         * common/linux-procfs.c (linux_proc_get_int)
2669         (linux_proc_pid_has_state): Use gdb_fopen_cloexec.
2670         * config.in, configure: Rebuild.
2671         * configure.ac: Don't check for sys/socket.h.  Check for
2672         fdwalk, pipe2.
2673         * corelow.c (core_open): Use gdb_open_cloexec.
2674         * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
2675         * fork-child.c (fork_inferior): Call close_most_fds.
2676         * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
2677         * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
2678         * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
2679         Use gdb_fopen_cloexec.
2680         (linux_proc_xfer_partial, linux_proc_xfer_spu): Use
2681         gdb_open_cloexec.
2682         (linux_async_pipe): Use gdb_pipe_cloexec.
2683         * remote-fileio.c (remote_fileio_func_open): Use
2684         gdb_open_cloexec.
2685         * remote.c (remote_file_put, remote_file_get): Use
2686         gdb_fopen_cloexec.
2687         * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
2688         close_most_fds.
2689         * ser-tcp.c (net_open): Use gdb_socket_cloexec.
2690         * ser-unix.c (hardwire_open): Use gdb_open_cloexec.
2691         * solib.c (solib_find): Use gdb_open_cloexec.
2692         * source.c (openp, find_and_open_source): Use gdb_open_cloexec.
2693         * tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
2694         (tfile_open): Use gdb_open_cloexec.
2695         * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
2696         * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
2697         * xml-support.c (xml_fetch_content_from_file): Use
2698         gdb_fopen_cloexec.
2699         * main.c (captured_main): Call notice_open_fds.
2700
2701 2013-04-22  Edjunior Machado  <emachado@linux.vnet.ibm.com>
2702
2703         * remote-sim.c (dump_mem): Change the type of 'buf' parameter from
2704         'char *' to 'gdb_byte *'.
2705         (gdbsim_store_register): Change the type of 'tmp' from 'char' to
2706         'gdb_byte'.
2707
2708 2013-04-22  Yao Qi  <yao@codesourcery.com>
2709
2710         * infrun.c: Fix typo in comment.
2711
2712 2013-04-22  Andrew Haley  <aph@redhat.com>
2713
2714         * arm-tdep.c (BranchDest): Cast result as "unsigned long",
2715         instead of "long".
2716
2717 2013-04-20  Yao Qi  <yao@codesourcery.com>
2718
2719         * ctf.c (ctf_fetch_registers): Change the type of 'regs' from
2720         'char *' to 'gdb_byte *'.  Cast the return value of
2721         'bt_ctf_get_char_array' to 'gdb_byte *'.
2722
2723 2013-04-19  Pedro Alves  <palves@redhat.com>
2724
2725         * configure.ac (build_warnings): Replace -Wno-pointer-sign with
2726         -Wpointer-sign.
2727         * configure: Regenerate.
2728
2729 2013-04-19  Pedro Alves  <palves@redhat.com>
2730
2731         * ser-tcp.c (net_read_prim): Cast second argument to recv to
2732         'void *'.
2733
2734 2013-04-19  Pedro Alves  <palves@redhat.com>
2735
2736         * monitor.c (monitor_write_memory, monitor_write_memory_bytes):
2737         Change type of 'myaddr' parameter to gdb_byte pointer.
2738         (monitor_write_memory_longlongs): Likewise.  Cast 'myaddr' pointer
2739         to 'long long' pointer instead of to 'unsigned long long'.
2740         (monitor_write_memory_block, monitor_read_memory_single)
2741         (monitor_read_memory): Change type of 'myaddr' parameter to
2742         gdb_byte pointer.
2743
2744 2013-04-19  Pedro Alves  <palves@redhat.com>
2745
2746         * record.c (validate_history_size): Make parameter 'setting'
2747         unsigned.
2748
2749 2013-04-19  Pedro Alves  <palves@redhat.com>
2750
2751         * ctf.c (ctf_write_uploaded_tsv, ctf_write_uploaded_tp): Add casts
2752         to 'gdb_byte *'.
2753
2754 2013-04-19  Pedro Alves  <palves@redhat.com>
2755
2756         * cp-valprint.c (cp_print_class_member): Change type of 'fieldno'
2757         local to int.
2758
2759 2013-04-19  Pedro Alves  <palves@redhat.com>
2760
2761         * ada-lang.c (print_it_exception): Add cast to gdb_byte *.
2762         * ada-tasks.c (read_fat_string_value): Likewise.
2763
2764 2013-04-19  Pedro Alves  <palves@redhat.com>
2765
2766         * dwarf2-frame.c (execute_cfa_program): Make 'bytes_read' local
2767         unsigned.  Pass 'tmp' to safe_read_uleb128 instead of the signed
2768         'offset', and adjust.
2769
2770 2013-04-19  Pedro Alves  <palves@redhat.com>
2771
2772         * dwarf2read.c (dwarf2_get_dwz_file): Add cast to const char *.
2773         (read_index_from_section): Add cast to 'char *'.
2774
2775 2013-04-19  Pedro Alves  <palves@redhat.com>
2776
2777         * xcoffread.c (xcoff_initial_scan): Add cast to 'char *'.
2778
2779 2013-04-19  Pedro Alves  <palves@redhat.com>
2780
2781         * coff-pe-read.c (read_pe_exported_syms): Handle strings as char.
2782
2783 2013-04-19  Pedro Alves  <palves@redhat.com>
2784
2785         * record-full.c (record_full_get_bookmark): Change local 'ret'
2786         type to char * and add cast to gdb_byte *.
2787         (record_full_goto_bookmark): Handle 'bookmark' argument as a
2788         string.
2789         * reverse.c (goto_bookmark_command): Add casts to gdb_byte *.
2790
2791 2013-04-19  Pedro Alves  <palves@redhat.com>
2792
2793         * python/py-inferior.c (infpy_write_memory): Add cast to gdb_byte
2794         * python/py-prettyprint.c (print_string_repr): Change type of
2795         'output' local to char *.  Add cast to gdb_byte * in
2796         LA_PRINT_STRING call.
2797         (print_children): Change type of 'output' local to char *.
2798         * python/py-value.c (valpy_string): Add cast to const char * in
2799         PyUnicode_Decode call.
2800
2801 2013-04-19  Pedro Alves  <palves@redhat.com>
2802
2803         * remote-mips.c (mips_cksum): Rename 'data' parameter to 'datastr'
2804         and change its type to 'const char *'.  Adjust.
2805         (mips_send_packet): Add cast to 'char *', and remove cast to
2806         'unsigned char *'.
2807         (mips_receive_packet): Remove cast to 'unsigned char *'.
2808         (mips_load_srec): Use bfd_byte.
2809         (pmon_makeb64, pmon_zeroset): Make 'chksum' parameter unsigned.
2810         (pmon_checkset): Make 'value' parameter unsigned.
2811
2812 2013-04-19  Pedro Alves  <palves@redhat.com>
2813
2814         * common/agent.c (agent_run_command): Add cast to gdb_byte *.
2815
2816 2013-04-19  Pedro Alves  <palves@redhat.com>
2817
2818         * remote.c (remote_write_bytes_aux, compare_sections_command)
2819         (remote_read_qxfer)
2820         (remote_search_memory, remote_hostio_pwrite, remote_hostio_pread)
2821         (remote_hostio_readlink, remote_bfd_iovec_pread)
2822         (remote_set_trace_notes): Use gdb_byte when RSP buffer is used as
2823         binary buffer, and char when buffer is used as string.
2824         * tracepoint.c (encode_source_string, tfile_write_uploaded_tp)
2825         (trace_save, tfile_open, traceframe_walk_blocks)
2826         (tfile_fetch_registers): Likewise.
2827
2828 2013-04-19  Pedro Alves  <palves@redhat.com>
2829
2830         * ser-base.c (ser_base_write): Change prototype -- take 'void *'
2831         buffer and size_t size.  Adjust.
2832         * ser-base.h (ser_base_write): Adjust.
2833         * ser-go32.c (cnts): Change type to size_t.
2834         (dos_write): Change prototype -- take 'void *'
2835         buffer and size_t size.  Adjust.
2836         (dos_info): Print elements of 'cnts' as unsigned long.
2837         * serial.c (serial_write): Likewise.
2838         * serial.h (serial_write): Adjust.
2839         (struct serial_ops) <write>: Change prototype -- take 'void *'
2840         buffer and size_t size.  Adjust.
2841
2842 2013-04-19  Pedro Alves  <palves@redhat.com>
2843
2844         * c-lang.c (evaluate_subexp_c): Cast result of obstack_base to
2845         gdb_byte *.
2846         * linux-tdep.c (linux_make_mappings_corefile_notes): Likewise.
2847
2848 2013-04-19  Pedro Alves  <palves@redhat.com>
2849
2850         * alpha-tdep.c (alpha_extract_return_value): Use
2851         regcache_cooked_read_unsigned to read 'v0'.
2852
2853 2013-04-19  Pedro Alves  <palves@redhat.com>
2854
2855         * xtensa-tdep.c (execute_l32e, execute_s32e): Change type of
2856         parameters 'at', 'as' and 'offset' to uint32_t.
2857
2858 2013-04-19  Pedro Alves  <palves@redhat.com>
2859
2860         * aarch64-tdep.c (aarch64_analyze_prologue): Change type of local
2861         'is64' to signed 'int'.
2862
2863 2013-04-19  Pedro Alves  <palves@redhat.com>
2864
2865         * s390-tdep.c (is_rs, is_rsy, is_rx, is_rxy): Change type of 'd2'
2866         parameter to int *.
2867
2868 2013-04-19  Pedro Alves  <palves@redhat.com>
2869
2870         * ppc-linux-tdep.c (ppc_skip_trampoline_code): Change local
2871         'insnbuf' buffer type to unsigned int[].
2872
2873 2013-04-19  Pedro Alves  <palves@redhat.com>
2874
2875         * mips-tdep.c (mips_read_pc): Change local 'pc' type to LONGEST.
2876
2877 2013-04-19  Pedro Alves  <palves@redhat.com>
2878
2879         * mep-tdep.c (mep_get_insn): Change 'insn' parameter type to
2880         unsigned long *.
2881
2882 2013-04-19  Pedro Alves  <palves@redhat.com>
2883
2884         * alpha-tdep.c (heuristic_fence_post): Change type to int.
2885         (alpha_heuristic_proc_start): Adjust to check -1 instead of
2886         UINT_MAX.
2887         * mips-tdep.c (heuristic_fence_post): Change type to int.
2888         (heuristic_proc_start): Adjust to check -1 instead of UINT_MAX.
2889
2890 2013-04-19  Pedro Alves  <palves@redhat.com>
2891
2892         * cris-tdep.c (usr_cmd_cris_version): Make unsigned.
2893         (struct gdbarch_tdep) <cris_version>: Make unsigned.
2894         (cris_spec_reg_applicable, cris_gdbarch_init): Adjust locals.
2895
2896 2013-04-19  Pedro Alves  <palves@redhat.com>
2897
2898         * avr-tdep.c (avr_io_reg_read_command): New local 'bufstr'.  Use
2899         it to get a string view of the byte buffer.
2900         * i386-cygwin-tdep.c (core_process_module_section): Change local 'buf'
2901         type to gdb_byte *.  Adjust.
2902         * linux-tdep.c (linux_info_proc, linux_find_memory_regions_full):
2903         Change local to char *.
2904         * solib-darwin.c (find_program_interpreter): Change return type to
2905         char *.  Adjust.
2906         (darwin_solib_get_all_image_info_addr_at_init): Adjust.
2907         * solib-dsbt.c (enable_break2): Change local 'buf' to char *.
2908         * solib-frv.c (enable_break2): Change local 'buf' to char *.
2909         * solib-spu.c (spu_current_sos): Add gdb_byte * cast.
2910         * solib-svr4.c (find_program_interpreter): Change return type to
2911         char *.  Adjust.
2912         (enable_break): Change local 'interp_name' to char *.
2913         * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
2914         * spu-tdep.c (spu_pseudo_register_read_spu): Add cast to 'char *'.
2915         (spu_pseudo_register_write_spu): Use char for string buffer.
2916         Adjust.
2917         (info_spu_event_command, info_spu_signal_command): Add casts to
2918         'char *'.
2919
2920 2013-04-19  Pedro Alves  <palves@redhat.com>
2921
2922         * aarch64-tdep.c (aarch64_default_breakpoint): Change type to
2923         gdb_byte[].
2924         (aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
2925         * ada-lang.c (ada_value_assign): Use gdb_byte.
2926         * alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
2927         (alphanbsd_sigtramp_offset): Use gdb_byte.
2928         * arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
2929         (arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
2930         (eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
2931         (arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
2932         (arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
2933         * arm-tdep.c (arm_stub_unwind_sniffer)
2934         (arm_displaced_init_closure): Use gdb_byte.
2935         (arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
2936         (arm_default_thumb_le_breakpoint)
2937         (arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
2938         * arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
2939         thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
2940         * arm-wince-tdep.c (arm_wince_le_breakpoint)
2941         (arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
2942         * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
2943         (arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
2944         (arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
2945         * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
2946         (arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
2947         * cris-tdep.c (push_stack_item, cris_push_dummy_call)
2948         (cris_store_return_value, cris_extract_return_value): Use
2949         gdb_byte.
2950         (constraint): Change type of parameter to char * from signed
2951         char*.  Use gdb_byte.
2952         * dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
2953         of local buffer to gdb_byte *.
2954         * dwarf2read.c (read_index_from_section): Use gdb_byte.
2955         (create_dwp_hash_table): Change type of locals to gdb_byte *.
2956         (add_address_entry): Change type of local buffer to gdb_byte[].
2957         * frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
2958         (frv_push_dummy_call): Use gdb_byte.
2959         * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
2960         (hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
2961         (hppa_hpux_supply_save_state): Use gdb_byte.
2962         * hppa-tdep.c (hppa32_push_dummy_call)
2963         (hppa64_convert_code_addr_to_fptr): Use gdb_byte.
2964         * ia64-tdep.c (extract_bit_field, replace_bit_field)
2965         (slotN_contents, replace_slotN_contents): Change type of parameter
2966         to gdb_byte *.
2967         (fetch_instruction, ia64_pseudo_register_write)
2968         (ia64_register_to_value, ia64_value_to_register)
2969         (ia64_extract_return_value, ia64_store_return_value)
2970         (ia64_push_dummy_call): Use gdb_byte.
2971         * m32c-tdep.c (m32c_return_value): Remove cast.
2972         * m68hc11-tdep.c (m68hc11_pseudo_register_write)
2973         (m68hc11_push_dummy_call, m68hc11_store_return_value): Use
2974         gdb_byte.
2975         * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
2976         * mn10300-tdep.c (mn10300_store_return_value)
2977         (mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
2978         gdb_byte.
2979         * moxie-tdep.c (moxie_process_readu): Use gdb_byte.
2980         (moxie_process_record): Remove casts.
2981         * ppc-ravenscar-thread.c (supply_register_at_address)
2982         (ppc_ravenscar_generic_store_registers): Use gdb_byte.
2983         * ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
2984         * remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
2985         * remote-mips.c (mips_xfer_memory): Use gdb_byte.
2986         * remote.c (compare_sections_command): Use gdb_byte.
2987         * score-tdep.c (score7_free_memblock): Change type of parameter to
2988         gdb_byte *.
2989         * sh-tdep.c (sh_justify_value_in_reg): Change return type to
2990         gdb_byte *.  Use gdb_byte.
2991         (sh_push_dummy_call_fpu): Use gdb_byte.
2992         (sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
2993         (sh_store_return_value_nofpu, sh_store_return_value_fpu)
2994         (sh_register_convert_to_virtual, sh_register_convert_to_raw):
2995         Change parameter type to 'gdb_byte *'.  Use gdb_byte.
2996         (sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
2997         * sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
2998         (sh64_store_return_value, sh64_register_convert_to_virtual):
2999         Change parameter type to 'gdb_byte *'.  Use gdb_byte.
3000         (sh64_pseudo_register_write): Use gdb_byte.
3001         * solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
3002         * solib-irix.c (fetch_lm_info): Likewise.  Use gdb_byte for byte
3003         buffer.
3004         (irix_current_sos): Use gdb_byte.
3005         * solib-som.c (som_current_sos): Use gdb_byte.
3006         * sparc-ravenscar-thread.c (supply_register_at_address)
3007         (sparc_ravenscar_generic_store_registers): Use gdb_byte.
3008         * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
3009         * spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
3010         * tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
3011         'gdb_byte *'.
3012         * tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
3013         'gdb_byte *'.
3014         * tracepoint.c (tfile_fetch_registers): Use gdb_byte.
3015         * xstormy16-tdep.c (xstormy16_extract_return_value)
3016         (xstormy16_store_return_value): Change parameter type to
3017         'gdb_byte *'.  Adjust.
3018         (xstormy16_push_dummy_call): Use gdb_byte.
3019         * xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
3020         (call0_analyze_prologue, execute_code): Use gdb_byte.
3021
3022 2013-04-19  Vladimir Kargov <kargov@gmail.com>
3023             Pedro Alves  <palves@redhat.com>
3024
3025         * i387-tdep.c (i387_print_float_info): Use gdb_byte for pointer to
3026         value contents.
3027
3028 2013-04-17  Doug Evans  <dje@google.com>
3029
3030         * dwarf2read.c (struct signatured_type): New member type.
3031         (struct attribute): Replace member signatured_type with signature.
3032         (DW_SIGNATURE): Replaces DW_SIGNATURE_TYPE.
3033         (read_call_site_scope): Call follow_die_ref instead of
3034         follow_die_ref_or_sig.
3035         (read_structure_type): Rewrite handling of signatured types.
3036         (read_enumeration_type): Ditto.
3037         (read_attribute_value): Update.
3038         (build_error_marker_type): New function.
3039         (lookup_die_type): Add assert.  Rewrite handling of signatured types.
3040         Don't call error for bad types, just build an error marker type.
3041         (dump_die_shallow): Update.
3042         (follow_die_sig_1): Renamed from follow_die_sig.
3043         Don't call error for bad types, instead return NULL.
3044         (follow_die_sig): New function.
3045         (get_signatured_type, get_DW_AT_signature_type): New functions.
3046
3047 2013-04-17  Yufeng Zhang  <yufeng.zhang@arm.com>
3048
3049         * aarch64-tdep.c (aarch64_write_pc): Removed.
3050         (aarch64_gdbarch_init): Remove set_gdbarch_write_pc of the above
3051         function.
3052
3053 2013-04-17  Yao Qi  <yao@codesourcery.com>
3054
3055         * top.c (print_gdb_configuration): Print configure-time
3056         parameter on using libbabeltrace or not.
3057
3058 2013-04-16  Pedro Alves  <palves@redhat.com>
3059
3060         * copyright.py (EXCLUDE_LIST): Add gdb/common/glibc_thread_db.h.
3061
3062 2013-04-16  Pedro Alves  <palves@redhat.com>
3063
3064         * common/glibc_thread_db.h: Update from upstream glibc
3065         (git 568035b7874a099087b77f7bba3e36a1173787b0).
3066
3067 2013-04-16  Pedro Alves  <palves@redhat.com>
3068
3069         * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: Factor out to ...
3070         * common/glibc_thread_db.h: ... this new file ...
3071         * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: ... and include it.
3072
3073 2013-04-16  Will Newton  <will.newton@gmail.com>
3074             Pedro Alves  <palves@redhat.com>
3075
3076         PR build/11881
3077
3078         * common/gdb_thread_db.h (LIBTHREAD_DB_SO)
3079         (LIBTHREAD_DB_SEARCH_PATH): Move outside of #ifdef
3080         HAVE_THREAD_DB_H.
3081
3082 2013-04-16  Pedro Alves  <palves@redhat.com>
3083             Eli Zaretskii  <eliz@gnu.org>
3084
3085         * NEWS: Mention "set foo unlimited".
3086
3087 2013-04-15  Doug Evans  <dje@google.com>
3088
3089         * dwarf2read.c (struct dwo_file): Replace member "cus" with "cu".
3090         (struct create_dwo_cu_data): Renamed from create_dwo_info_table_data.
3091         (create_dwo_cu_reader): Renamed from
3092         create_dwo_debug_info_hash_table_reader.
3093         (create_dwo_cu): Renamed from create_dwo_debug_info_hash_table.
3094         Remove support for multiple CUs in a DWO file.
3095         (open_and_init_dwo_file, lookup_dwo_cutu): Update.
3096
3097         * dwarf2read.c (create_debug_types_hash_table): Use hex_string
3098         instead of phex.
3099         (lookup_dwo_unit, create_dwo_debug_info_hash_table_reader): Ditto.
3100         (create_dwo_in_dwp): Ditto.
3101
3102 2013-04-15  Tom Tromey  <tromey@redhat.com>
3103
3104         * NEWS: Move recent entries into "since 7.6" section.
3105
3106 2013-04-15  Tom Tromey  <tromey@redhat.com>
3107
3108         PR c++/13588:
3109         * NEWS: Update.
3110         * break-catch-throw.c (struct exception_catchpoint)
3111         <exception_rx, pattern>: New fields.
3112         (fetch_probe_arguments, dtor_exception_catchpoint)
3113         (check_status_exception_catchpoint)
3114         (print_one_detail_exception_catchpoint): New functions.
3115         (handle_gnu_v3_exceptions): Add "except_rx" argument.
3116         Compile regular expression if needed.
3117         (extract_exception_regexp): New function.
3118         (catch_exception_command_1): Use extract_exception_regexp.
3119         (compute_exception): Use fetch_probe_arguments.
3120         (initialize_throw_catchpoint_ops): Set dtor, print_one_detail,
3121         and check_status fields.
3122         * cp-abi.c (cplus_typename_from_type_info): New function.
3123         * cp-abi.h (cplus_typename_from_type_info): Declare.
3124         (struct cp_abi_ops) <get_typename_from_type_info>: New field.
3125         * gdb_regex.h (compile_rx_or_error): Declare.
3126         * gnu-v3-abi.c (gnuv3_get_typename_from_type_info): Update
3127         comment.
3128         (init_gnuv3_ops): Set get_type_from_type_info field.
3129         * probe.c (compile_rx_or_error): Move...
3130         * utils.c (compile_rx_or_error): ... here.
3131
3132 2013-04-15  Tom Tromey  <tromey@redhat.com>
3133
3134         PR c++/15176:
3135         * NEWS: Update.
3136         * break-catch-throw.c (compute_exception): New function.
3137         (exception_funcs): New global.
3138         (_initialize_break_catch_throw): Create $_exception.
3139         * cp-abi.c (cplus_type_from_type_info): New function.
3140         * cp-abi.h (cplus_type_from_type_info): Declare.
3141         (struct cp_abi_ops) <get_type_from_type_info>: New field.
3142         * gnu-v3-abi.c (gnuv3_get_typename_from_type_info)
3143         (gnuv3_get_type_from_type_info): New functions.
3144         (init_gnuv3_ops): Set get_type_from_type_info ABI field.
3145
3146 2013-04-15  Tom Tromey  <tromey@redhat.com>
3147
3148         * break-catch-throw.c (struct exception_names): New.
3149         (exception_functions): Change type.
3150         (re_set_exception_catchpoint): Look for SDT probes.
3151
3152 2013-04-15  Tom Tromey  <tromey@redhat.com>
3153
3154         PR c++/10119:
3155         * break-catch-throw.c (exception_functions): New global.
3156         (gnu_v3_exception_catchpoint_ops): Move earlier.
3157         (struct exception_catchpoint): New.
3158         (classify_exception_breakpoint): Rewrite.
3159         (re_set_exception_catchpoint): New function.
3160         (handle_gnu_v3_exceptions): Return void.  Use init_catchpoint.
3161         Allocate a struct exception_catchpoint.
3162         (catch_exception_command_1): Update.
3163         (initialize_throw_catchpoint_ops): Set 're_set' method.
3164
3165 2013-04-15  Tom Tromey  <tromey@redhat.com>
3166
3167         * Makefile.in (SFILES): Add break-catch-throw.c
3168         (COMMON_OBS): Add break-catch-throw.o.
3169         * break-catch-throw.c: New file.
3170         * breakpoint.c: Move exception-catching code to new file.
3171         (ep_parse_optional_if_clause): No longer static.
3172         * breakpoint.h (ep_parse_optional_if_clause): Declare.
3173
3174 2013-04-15  Tom Tromey  <tromey@redhat.com>
3175
3176         PR c++/9065:
3177         * NEWS: Update.
3178         * breakpoint.c (watchpoint_exp_is_const): Add OP_TYPEID.
3179         * c-exp.y (TYPEID): New token.
3180         (exp): Add new TYPEID productions.
3181         (ident_tokens): Add "typeid".
3182         * cp-abi.c (cplus_typeid, cplus_typeid_type): New functions.
3183         * cp-abi.h (cplus_typeid, cplus_typeid_type): Declare.
3184         (struct cp_abi_ops) <get_typeid, get_typeid_type>: New fields.
3185         * eval.c (evaluate_subexp_standard) <OP_TYPEID>: New case.
3186         * expprint.c (dump_subexp_body_standard) <OP_TYPEID>: New
3187         case.
3188         * gnu-v3-abi.c (std_type_info_gdbarch_data): New global.
3189         (build_std_type_info_type, gnuv3_get_typeid_type)
3190         (gnuv3_get_typeid): New functions.
3191         (init_gnuv3_ops): Initialize std_type_info_gdbarch_data.  Set
3192         new fields on ABI object.
3193         * parse.c (operator_length_standard) <OP_TYPEID>: New case.
3194         * std-operator.def (OP_TYPEID): New.
3195
3196 2013-04-15  Tom Tromey  <tromey@redhat.com>
3197
3198         * elfread.c (elf_symtab_read): Install versioned symbol under
3199         unversioned name as well.
3200
3201 2013-04-15  Tom Tromey  <tromey@redhat.com>
3202
3203         PR c++/11990:
3204         * c-lang.c (cplus_language_defn): Use gdb_demangle.
3205         * c-typeprint.c (c_type_print_base): Use gdb_demangle.
3206         * cp-support.c (mangled_name_to_comp): Use gdb_demangle.
3207         (gdb_demangle): New function.
3208         * cp-support.h (gdb_demangle): Declare.
3209         * dwarf2read.c (dwarf2_physname, fixup_partial_die)
3210         (dwarf2_name): Use gdb_demangle.
3211         * gdbtypes.c (check_stub_method): Use gdb_demangle.
3212         * gnu-v3-abi.c (gnuv3_rtti_type): Strip @plt and version
3213         suffixes from name.
3214         (gnuv3_print_method_ptr): Use gdb_demangle.
3215         * jv-lang.c (java_demangle): Use gdb_demangle.
3216         * jv-typeprint.c (java_type_print_base): Use gdb_demangle.
3217         * language.c (unk_lang_demangle): Use gdb_demangle.
3218         * symtab.c (symbol_find_demangled_name)
3219         (demangle_for_lookup): Use gdb_demangle.
3220
3221 2013-04-15  Tom Tromey  <tromey@redhat.com>
3222
3223         PR c++/12824:
3224         * NEWS: Update.
3225         * breakpoint.c (enum exception_event_kind) <EX_EVENT_RETHROW>:
3226         New constant.
3227         (classify_exception_breakpoint): New function.
3228         (print_it_exception_catchpoint, print_one_exception_catchpoint)
3229         (print_mention_exception_catchpoint)
3230         (print_recreate_exception_catchpoint, handle_gnu_v3_exceptions)
3231         (catch_exception_command_1): Handle "rethrow" catchpoint.
3232         (catch_rethrow_command): New function.
3233         (_initialize_breakpoint): Add "catch rethrow" command.
3234
3235 2013-04-15  Pierre Muller  <muller@sourceware.org>
3236
3237         * contrib/ari/gdb_ari.sh (write_pc rule): Do not consider
3238         set_gdbarch_write_pc as deprecated anymore.
3239
3240 2013-04-15  Joel Brobecker  <brobecker@adacore.com>
3241
3242         * spu-tdep.c (spu_write_pc): Add empty line after local variable
3243         declarations.
3244
3245 2013-04-13  Yao Qi  <yao@codesourcery.com>
3246
3247         * ctf.c (_initialize_ctf): Include "completer.h".
3248         Call add_target_with_completer instead of add_target.
3249
3250 2013-04-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
3251
3252         Fix GDB regression related to PR binutils/14813.
3253         * jit.c (mem_bfd_iovec_close): Return 0 for success.
3254         * minidebug.c (lzma_close): Add return value comment.
3255         * remote.c (remote_bfd_iovec_close): Return 0 for success.
3256         * solib-spu.c (spu_bfd_iovec_close): Likewise.
3257         * spu-linux-nat.c (spu_bfd_iovec_close): Likewise.
3258
3259 2013-04-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
3260
3261         * config.in: Regenerate.
3262
3263 2013-04-12  Tom Tromey  <tromey@redhat.com>
3264
3265         * dwarf2-frame.c (struct comp_unit) <dwarf_frame_buffer>: Now
3266         const.
3267         * dwarf2read.c (struct dwarf2_section_info) <buffer>: Now const.
3268         (struct die_reader_specs) <buffer>: Likewise.
3269         (die_reader_func_ftype): Make 'info_ptr' const.
3270         (struct line_header) <include_dirs, statement_program_start,
3271         statement_program_end>: Now const.
3272         (struct file_entry) <name>: Likewise.
3273         (struct partial_die_info) <sibling>: Likewise.
3274         (struct dwarf_block) <data>: Likewise.
3275         (dwarf2_read_section): Remove cast.
3276         (dwarf2_get_section_info): Make 'bufp' const.
3277         (read_index_from_section): Constify.
3278         (dw2_get_file_names_reader): Make 'info_ptr' const.
3279         (dw2_get_primary_filename_reader): Likewise.
3280         (read_comp_unit_head): Make 'info_ptr' and return type const.
3281         (read_and_check_comp_unit_head, read_and_check_type_unit_head):
3282         Likewise.
3283         (read_abbrev_offset): Constify.
3284         (dwarf2_create_include_psymtab): Make 'name' const.
3285         (create_debug_types_hash_table): Update.
3286         (read_cutu_die_from_dwo): Make 'result_info_ptr' const.
3287         (init_cutu_and_read_dies, init_cutu_and_read_dies_no_follow):
3288         Constify.
3289         (process_psymtab_comp_unit_reader, build_type_psymtabs_reader)
3290         (load_partial_comp_unit_reader): Make 'info_ptr' const.
3291         (read_comp_units_from_section): Constify.
3292         (peek_abbrev_code, peek_die_abbrev, skip_children, skip_one_die)
3293         (locate_pdi_sibling, load_full_comp_unit_reader): Make 'info_ptr'
3294         const.
3295         (dwarf2_compute_name, setup_type_unit_groups): Constify.
3296         (create_dwo_debug_info_hash_table): Make 'info_ptr' const.
3297         (create_dwp_hash_table, dwarf2_ranges_read)
3298         (dwarf2_record_block_ranges): Constify.
3299         (read_die_and_children, read_die_and_siblings_1)
3300         (read_die_and_siblings): Make 'info_ptr' and 'new_info_ptr'
3301         const.
3302         (read_full_die_1, read_full_die): Make 'info_ptr' const.
3303         (abbrev_table_read_table): Constify.
3304         (load_partial_dies): Make 'info_ptr' const.
3305         (read_partial_die, read_attribute_value, read_attribute): Make
3306         'info_ptr' and return type const.
3307         (read_address, read_initial_length)
3308         (read_checked_initial_length_and_offset, read_offset)
3309         (read_offset_1, read_n_bytes, read_direct_string): Make 'buf'
3310         const.
3311         (read_direct_string): Make 'buf' and return type const.
3312         (read_indirect_string_at_offset, read_indirect_string_from_dwz)
3313         (read_indirect_string): Make return type const.
3314         (read_unsigned_leb128, read_signed_leb128): Make 'buf' const.
3315         (read_addr_index_from_leb128, dwarf2_read_addr_index_reader): Make
3316         'info_ptr' const.
3317         (read_str_index): Make return type const.
3318         (add_include_dir): Make 'include_dir' const.
3319         (add_file_name): Make 'name' const.
3320         (dwarf_decode_line_header): Constify.
3321         (psymtab_include_file_name): Make return type const.
3322         (dwarf_decode_lines_1, dwarf_decode_lines): Constify.
3323         (dwarf2_start_subfile): Make 'filename' const.
3324         (dwarf2_const_value_attr): Make 'bytes' const.
3325         (read_signatured_type_reader): Make 'info_ptr' const.
3326         (decode_locdesc): Constify.
3327         (skip_form_bytes): Make 'bytes', 'buffer_end', and return type
3328         const.
3329         (skip_unknown_opcode): Make 'opcode_definitions', 'mac_ptr',
3330         'mac_end', and return type const.
3331         (dwarf_parse_macro_header): Make 'mac_ptr' and return type const.
3332         (dwarf_decode_macro_bytes): Make 'mac_ptr', 'mac_end', and return
3333         type const.
3334         (per_cu_header_read_in): Constify.
3335         * symfile.h (dwarf2_get_section_info): Update.
3336
3337 2013-04-12  Tom Tromey  <tromey@redhat.com>
3338
3339         * symtab.h (struct general_symbol_info) <value.bytes>: Make const.
3340
3341 2013-04-12  Eli Zaretskii  <eliz@gnu.org>
3342
3343         * NEWS: Mention "show configuration", --configuration.
3344         * top.c (print_gdb_configuration): New function, displays the
3345         details about GDB configure-time parameters.
3346         (print_gdb_version): Mention "show configuration".
3347         * cli/cli-cmds.c (show_configuration): New function.
3348         (_initialize_cli_cmds): Add the "show configuration" command.
3349         * main.c (captured_main) <print_configuration>: New static var.
3350         <long_options>: Use it.
3351         If --configuration was given, call print_gdb_configuration.
3352
3353 2013-04-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
3354             Pedro Alves  <palves@redhat.com>
3355
3356         * Makefile.in (HAVE_NATIVE_GCORE_TARGET): New.
3357         (generated_files): Add gcore.
3358         (install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or
3359         HAVE_NATIVE_GCORE_HOST.
3360         (gcore): New.
3361         * NEWS (Changes since GDB 7.6): Mention newly installed gcore.
3362         * config/alpha/alpha-osf3.mh, config/i386/fbsd.mh,
3363         config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh,
3364         config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh,
3365         config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh:
3366         Add HAVE_NATIVE_GCORE_HOST.
3367         * configure: Regenerate.
3368         * configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it.
3369         New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME.  New
3370         AC_CONFIG_FILES for gcore.
3371         * configure.tgt: Add gdb_have_gcore to the initial comment.  Set
3372         gdb_have_gcore.
3373         * gdb_gcore.sh: Rename to ...
3374         * gcore.in: ... here.  Remove gcore.sh comment.  Use GDB_TRANSFORM_NAME
3375         and GCORE_TRANSFORM_NAME substitutions.
3376
3377         Fix parsing tabs in ${gdb_target_obs}.
3378         * configure.tgt (gdb_have_gcore): Replace case with for and if.
3379
3380 2013-04-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
3381
3382         * remote.c (unpush_and_perror): Add output message final dot.
3383
3384 2013-04-11  Yao Qi  <yao@codesourcery.com>
3385
3386         * tracepoint.c (tfile_interp_line): Fit parameters line and
3387         utpp in one line.
3388
3389 2013-04-10  Joel Brobecker  <brobecker@adacore.com>
3390
3391         * solib.c (solib_map_sections): Remove code overwriting
3392         SO->SO_NAME with the bfd's filename.
3393
3394 2013-04-10  Pedro Alves  <palves@redhat.com>
3395
3396         * cli/cli-decode.c (integer_unlimited_completer): New function.
3397         (add_setshow_integer_cmd, add_setshow_uinteger_cmd)
3398         (add_setshow_zuinteger_unlimited_cmd): Install the "unlimited"
3399         completer.
3400         * cli/cli-setshow.c: Include "cli/cli-utils.h".
3401         (is_unlimited_literal): New function.
3402         (do_set_command): Handle literal "unlimited" arguments.
3403         * frame.c (_initialize_frame) <set backtrace limit>: Document
3404         "unlimited".
3405         * printcmd.c (_initialize_printcmd) <set print
3406         max-symbolic-offset>: Add help text.
3407         * record-full.c (_initialize_record_full) <set record full
3408         insn-number-max>: Likewise.
3409         * record.c (_initialize_record) <set record
3410         instruction-history-size, set record function-call-history-size>:
3411         Add help text.
3412         * ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add
3413         help text.
3414         * tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>:
3415         Likewise.
3416         * source.c (_initialize_source) <set listsize>: Add help text.
3417         * utils.c (initialize_utils) <set height, set width>: Likewise.
3418         <set pagination>: Mention "set height unlimited".
3419         * valprint.c (_initialize_valprint) <set print elements, set print
3420         repeats>: Document "unlimited".
3421
3422 2013-04-10  Pedro Alves  <palves@redhat.com>
3423
3424         * cli/cli-cmds.c (quit_command): Call query_if_trace_running
3425         instead of disconnect_tracing.
3426         * infcmd.c (detach_command, disconnect_command): Call
3427         query_if_trace_running.  Adjust.
3428         * top.c: Include "tracepoint.h".
3429         (quit_target): Delete.  Contents moved ...
3430         (quit_force): ... here.  Wrap each stage of teardown in
3431         TRY_CATCH.  Call disconnect_tracing before detaching.
3432
3433 2013-04-10  Hui Zhu  <hui@codesourcery.com>
3434             Yao Qi  <yao@codesourcery.com>
3435
3436         * configure.ac: Check libbabeltrace is installed.
3437         * config.in: Regenerate.
3438         * configure: Regenerate.
3439         * Makefile.in (LIBBABELTRACE): New.
3440         (CLIBS): Add LIBBABELTRACE.
3441         * ctf.c: Include "exec.h".
3442         (CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros.
3443         (CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros.
3444         (ctf_save_metadata_header): Define new type aliases in
3445         metadata.
3446         (ctf_write_header): Define event type "tsv_def" and "tp_def"
3447         in metadata.  Start a new faked packet for trace status.
3448         (ctf_write_status): Write trace status to CTF.
3449         (ctf_write_uploaded_tsv): Write TSV to CTF.
3450         (ctf_write_uploaded_tp): Write tracepoint definition to CTF.
3451         (ctf_write_definition_end): End the faked packet.
3452
3453         (ctx, ctf_iter, trace_dirname): New.
3454         (start_pos): New variable.
3455         (ctf_destroy, ctf_open_dir, ctf_open): New.
3456         (SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New
3457         macros.
3458         (ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New.
3459         (ctf_fetch_registers, ctf_xfer_partial): New.
3460         (ctf_get_trace_state_variable_value): New.
3461         (ctf_get_tpnum_from_frame_event): New.
3462         (ctf_get_traceframe_address): New.
3463         (ctf_trace_find, ctf_has_stack): New.
3464         (ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New.
3465         (ctf_get_trace_status, ctf_read_status): New.
3466         (_initialize_ctf): New.
3467         * tracepoint.c (get_tracepoint_number): New
3468         (get_uploaded_tsv): Remove 'static'.
3469         (struct traceframe_info, trace_regblock_size): Move it to ...
3470         * tracepoint.h: ... here.
3471         (get_tracepoint_number): Declare it.
3472         (get_uploaded_tsv): Declare it.
3473
3474         * NEWS: Mention new configure option.
3475
3476 2013-04-10  Pedro Alves  <palves@redhat.com>
3477             Hui Zhu  <hui@codesourcery.com>
3478
3479         * breakpoint.c (dprintf_re_set): New.
3480         (initialize_breakpoint_ops): Set dprintf_breakpoint_ops re_set
3481         to dprintf_re_set.
3482
3483 2013-04-09  Joel Brobecker  <brobecker@adacore.com>
3484
3485         * configure.tgt (gdb_target_obs) <powerpc-*-aix* | rs6000-*-*>:
3486         Remove solib-svr4.o from the list.
3487
3488 2013-04-09  Joel Brobecker  <brobecker@adacore.com>
3489
3490         * varobj.c (update_dynamic_varobj_children) [!HAVE_PYTHON]:
3491         Use gdb_assert_not_reached instead of invalid boolean expression.
3492
3493 2013-04-09  Pedro Alves  <palves@redhat.com>
3494
3495         * remote.c (unpush_and_perror): New function.
3496         (readchar, remote_serial_write): Use it.
3497
3498 2013-04-09  Markus Metzger  <markus.t.metzger@intel.com>
3499
3500         * NEWS: Mention new btrace RSP packets.
3501
3502 2013-04-08  Tom Tromey  <tromey@redhat.com>
3503
3504         * symmisc.c (dump_msymbols): Cast fprintf_filtered argument to
3505         long.
3506
3507 2013-04-08  Tom Tromey  <tromey@redhat.com>
3508
3509         * maint.c (print_bfd_section_info): Print the section index.
3510         * symmisc.c (dump_msymbols): Print the section index.
3511
3512 2013-04-08  Tom Tromey  <tromey@redhat.com>
3513
3514         PR symtab/8424:
3515         * blockframe.c (find_pc_partial_function_gnu_ifunc): Check
3516         SYMBOL_SECTION, not SYMBOL_OBJ_SECTION.
3517         * breakpoint.c (resolve_sal_pc): Update.
3518         * elfread.c (elf_gnu_ifunc_record_cache): Update.
3519         * findvar.c (struct minsym_lookup_data) <objfile>: New field.
3520         (minsym_lookup_iterator_cb): Use it.
3521         (default_read_var_value): Update.
3522         * hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline):
3523         Update.
3524         * infcmd.c (jump_command): Update.
3525         * linespec.c (minsym_found): Update.
3526         * maint.c (maintenance_translate_address): Update.
3527         * minsyms.c (lookup_minimal_symbol_by_pc_section_1): Update.
3528         (prim_record_minimal_symbol_full): Don't set SYMBOL_OBJ_SECTION.
3529         * parse.c (write_exp_msymbol): Update.
3530         * printcmd.c (address_info): Update.
3531         * psymtab.c (find_pc_sect_psymbol): Update.
3532         (fixup_psymbol_section): Check SYMBOL_SECTION, not
3533         SYMBOL_OBJ_SECTION.
3534         (add_psymbol_to_bcache): Correctly initialize SYMBOL_SECTION.
3535         Don't initialize SYMBOL_OBJ_SECTION.
3536         * spu-tdep.c (spu_catch_start): Update.
3537         * stabsread.c (define_symbol): Don't set SYMBOL_SECTION.
3538         * symmisc.c (dump_msymbols, print_symbol): Update.
3539         * symtab.c (fixup_section): Don't set 'obj_section'.  Change
3540         how fallback section is computed.
3541         (fixup_symbol_section): Update.
3542         (find_pc_sect_symtab, find_function_start_sal, skip_prologue_sal):
3543         Update.
3544         (allocate_symbol, initialize_symbol, allocate_template_symbol):
3545         Initialize SYMBOL_SECTION.
3546         * symtab.h (struct general_symbol_info) <section>: Update comment.
3547         <obj_section>: Remove.
3548         (SYMBOL_OBJ_SECTION): Add 'objfile' argument.  Rewrite.
3549         (SYMBOL_OBJFILE): New macro.
3550
3551 2013-04-08  Tom Tromey  <tromey@redhat.com>
3552
3553         * coffread.c (record_minimal_symbol): Update.
3554         * dbxread.c (record_minimal_symbol): Update.
3555         * elfread.c (record_minimal_symbol): Update.
3556         * machoread.c (macho_symtab_add_minsym): Update.
3557         * mdebugread.c (record_minimal_symbol, parse_partial_symbols):
3558         Update.
3559         * minsyms.c (prim_record_minimal_symbol): Update.
3560         (prim_record_minimal_symbol_full): Remove 'bfd_section'
3561         argument.
3562         (prim_record_minimal_symbol_and_info): Likewise.
3563         * minsyms.h (prim_record_minimal_symbol_full)
3564         (prim_record_minimal_symbol_and_info): Update.
3565         * symtab.c (allocate_symbol, initialize_symbol)
3566         (allocate_template_symbol): Initialize SYMBOL_SECTION.
3567         * xcoffread.c (record_minimal_symbol, scan_xcoff_symtab):
3568         Update.
3569
3570 2013-04-08  Tom Tromey  <tromey@redhat.com>
3571
3572         PR symtab/8423:
3573         * solib-som.c (som_solib_section_offsets): Use BFD section
3574         indices.  Set offsets for all sections.
3575         * somread.c (som_symtab_read): Compute BFD section for
3576         symbol.  Use prim_record_minimal_symbol_and_info.
3577         (som_symfile_read): Fix comment.
3578         (struct find_section_offset_arg): New.
3579         (find_section_offset, set_section_index): New functions.
3580         (som_symfile_offsets): Use set_section_index to compute
3581         section indices.
3582
3583 2013-04-08  Tom Tromey  <tromey@redhat.com>
3584
3585         * coffread.c (cs_to_section): Use gdb_bfd_section_index.
3586         * elfread.c (record_minimal_symbol, elf_symtab_read): Use
3587         gdb_bfd_section_index.
3588         * gdb_bfd.c (gdb_bfd_section_index, gdb_bfd_count_sections):
3589         New functions.
3590         * gdb_bfd.h (gdb_bfd_section_index, gdb_bfd_count_sections):
3591         Declare.
3592         * machoread.c (macho_symtab_add_minsym, macho_symfile_offsets):
3593         Update.
3594         * objfiles.c (add_to_objfile_sections_full): New function.
3595         (add_to_objfile_sections): Use it.
3596         (build_section_table): Rewrite.
3597         (objfile_relocate1): Use gdb_bfd_section_index.  Update.
3598         * objfiles.h (obj_section_offset): Use gdb_bfd_section_index.
3599         (struct objfile) <sections>: Update comment.
3600         (ALL_OBJFILE_OSECTIONS): Skip sections where the_bfd_section
3601         is NULL.
3602         (ALL_OBJSECTIONS): Use it.
3603         * solib-dsbt.c (dsbt_relocate_main_executable): Update.
3604         * solib-frv.c (frv_relocate_main_executable): Update.
3605         * solib-target.c (solib_target_relocate_section_addresses):
3606         Use gdb_bfd_section_index.
3607         * symfile.c (build_section_addr_info_from_section_table):
3608         Use gdb_bfd_section_index.
3609         (build_section_addr_info_from_bfd, place_section): Likewise.
3610         * symtab.c (fixup_section): Update.
3611         * xcoffread.c (find_targ_sec): Use gdb_bfd_section_index.
3612
3613 2013-04-08  Tom Tromey  <tromey@redhat.com>
3614
3615         * minsyms.h (struct bound_minimal_symbol): New.
3616         (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
3617         Remove objfile argument.
3618         (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
3619         Return bound_minimal_symbol.
3620         * minsyms.c (lookup_minimal_symbol_by_pc_1)
3621         (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc):
3622         Return bound_minimal_symbol.
3623         (in_gnu_ifunc_stub): Update.
3624         (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol.
3625         Remove 'objfile_p' argument.
3626         (lookup_solib_trampoline_symbol_by_pc): Update.
3627         * ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c,
3628         arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c,
3629         c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c,
3630         glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c,
3631         i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c,
3632         linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c,
3633         mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c,
3634         ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c,
3635         stack.c, symtab.c, tui/tui-disasm.c: Update.
3636
3637 2013-04-08  Tom Tromey  <tromey@redhat.com>
3638
3639         * ada-lang.c (ada_decode_symbol): Check and set 'ada_mangled'.
3640         Use symbol's obstack, not an objfile.
3641         * coffread.c (process_coff_symbol): Update.
3642         * dwarf2read.c (fixup_go_packaging, new_symbol_full): Update.
3643         * jv-lang.c (add_class_symbol): Update.
3644         * mdebugread.c (new_symbol): Update.
3645         * minsyms.c (prim_record_minimal_symbol_full)
3646         (terminate_minimal_symbol_table): Update.
3647         * psymtab.c (add_psymbol_to_bcache): Clear entire symbol.  Update.
3648         * stabsread.c (define_symbol, read_enum_type): Update.
3649         * symtab.c (symbol_set_demangled_name, symbol_get_demangled_name):
3650         Handle Ada specially.
3651         (symbol_set_language): Add 'obstack' argument.
3652         (symbol_set_names): Update.
3653         (symbol_natural_name, symbol_demangled_name): Always use
3654         ada_decode_symbol.
3655         * symtab.h (struct general_symbol_info)
3656         <language_specific::obstack>: New field.
3657         <ada_mangled>: New field.
3658         (SYMBOL_SET_LANGUAGE): Add 'obstack' argument.
3659         (symbol_set_language): Update.
3660
3661 2013-04-08  Tom Tromey  <tromey@redhat.com>
3662
3663         * symtab.c (symbol_init_cplus_specific, symbol_set_demangled_name):
3664         Take an obstack, not an objfile.
3665         (symbol_set_names): Update.
3666         * symtab.h (symbol_set_demangled_name): Update.
3667
3668 2013-04-08  Tom Tromey  <tromey@redhat.com>
3669
3670         * coffread.c (process_coff_symbol, coff_read_enum_type): Call
3671         allocate_symbol.
3672         * dwarf2read.c (fixup_go_packaging): Call allocate_symbol.
3673         (read_func_scope): Call allocate_template_symbol.
3674         (new_symbol_full): Call allocate_symbol.
3675         * jit.c (finalize_symtab): Call allocate_symbol.
3676         * jv-lang.c (add_class_symbol): Call allocate_symbol.
3677         * mdebugread.c (parse_symbol, new_block): Call allocate_symbol.
3678         * stabsread.c (patch_block_stabs, define_symbol, read_enum_type)
3679         (common_block_end): Call allocate_symbol.
3680         * symtab.c (allocate_symbol, initialize_symbol)
3681         (allocate_template_symbol): New functions.
3682         * symtab.c (allocate_symbol, initialize_symbol)
3683         (allocate_template_symbol): Declare.
3684         * xcoffread.c (process_xcoff_symbol): Call initialize_symbol.
3685
3686 2013-04-08  Pedro Alves  <palves@redhat.com>
3687             Keith Seitz  <keiths@redhat.com>
3688
3689         * breakpoint.c (create_breakpoint): Rename
3690         "parse_condition_and_thread" parameter to "parse_arg".  Update
3691         describing comment.  If !PARSE_ARG, then error out if ARG is not
3692         the empty string after extracting the location.
3693         * breakpoint.h (create_breakpoint): Rename
3694         "parse_condition_and_thread" parameter to "parse_arg".
3695
3696 2013-04-08  Aleksandar Ristovski  <aristovski@qnx.com
3697
3698         * solib-svr4.c (lm_addr_check): Add const qualifier to 'so' arg.
3699
3700 2013-04-07  Yao Qi  <yao@codesourcery.com>
3701
3702         * remote.c (remote_trace_find): Change type of parameters 'addr1'
3703         and 'addr2' to CORE_ADDR.
3704         * target.c (update_current_target): Update.
3705         * target.h (struct target_ops) <to_trace_find>: Change parameter
3706         type to CORE_ADDR.
3707         * tracepoint.c (tfind_1): Change type of parameters 'addr1' and
3708         'addr2' to CORE_ADDR.
3709         (tfile_trace_find): Likewise.
3710         (tfile_get_traceframe_address): Change return type to CORE_ADDR.
3711         Change local variable 'addr' to type CORE_ADDR.
3712         * tracepoint.h (tfind_1): Update declaration.
3713
3714 2013-04-06  Eli Zaretskii  <eliz@gnu.org>
3715
3716         * windows-nat.c (windows_get_absolute_argv0): Move from here...
3717         * mingw-hdep.c (windows_get_absolute_argv0): ...to here.
3718         Include main.h.
3719
3720         * windows-nat.h (windows_get_absolute_argv0): Move prototype from
3721         here...
3722         * main.h (windows_get_absolute_argv0): ...to here.
3723
3724 2013-04-05  Doug Evans  <dje@google.com>
3725
3726         * dwarf2read.c (struct dwarf2_per_objfile): Tweak comment.
3727         (read_cutu_die_from_dwo): Add comments.
3728         (read_structure_type): Update comment.
3729         (read_enumeration_type, read_namespace_type): Update comment.
3730         (read_die_type, get_die_type_at_offset, get_die_type): Update comment.
3731
3732 2013-04-05  Jan Kratochvil  <jan.kratochvil@redhat.com>
3733
3734         Convert man pages to texinfo, new gdbinit.5 texinfo page.
3735         * Makefile.in (gdb.z): Remove.
3736         (install-only): Remove $(man1dir) and gdb.1 installation.
3737         * gdb.1: Remove.
3738
3739 2013-04-05  Jan Kratochvil  <jan.kratochvil@redhat.com>
3740
3741         Fix compatibility with Linux kernel 3.8.3.
3742         * linux-tdep.c (linux_find_memory_regions_full): Move variable number
3743         to more inner block.  Remove parsing of NUMBER from outer block.
3744         Parse NUMBER only if KEYWORD has been identified.
3745
3746 2013-04-05  Jan Kratochvil  <jan.kratochvil@redhat.com>
3747
3748         Fix variable name shadowing.
3749         * linux-tdep.c (linux_find_memory_regions_full): Rename outer variable
3750         filename to mapsfilename and update its uses.
3751
3752 2013-04-05  Eli Zaretskii  <eliz@gnu.org>
3753
3754         * Makefile.in (TAGS): Avoid warning from etags when $GDB_NM_FILE is
3755         empty.  See http://sourceware.org/ml/gdb-patches/2012-08/msg00504.html
3756         and http://sourceware.org/ml/gdb-patches/2013-04/msg00055.html for
3757         details of the problem.
3758
3759 2013-04-04  Pedro Alves  <palves@redhat.com>
3760             Hui Zhu  <hui@codesourcery.com>
3761
3762         * breakpoint.c (validate_commands_for_breakpoint): If validating a
3763         tracepoint, reset its STEP_COUNT and call validate_actionline.
3764
3765 2013-04-03  Doug Evans  <dje@google.com>
3766
3767         * dwarf2read.c (read_die_and_siblings_1): Renamed from
3768         read_die_and_siblings.
3769         (read_die_and_siblings): New function.
3770         (read_cutu_die_from_dwo): Dump die if requested.
3771         (read_die_and_children): Call read_full_die_1 and
3772         read_die_and_siblings_1.
3773         (read_full_die): Dump die if requested.
3774
3775         * dwarf2read.c (read_comp_units_from_section): Add debugging printf.
3776
3777         * dwarf2read.c (struct dwo_file): New member comp_dir.
3778         Rename member name to dwo_name.  All uses updated.
3779         (hash_dwo_file): Include comp_dir in computation.
3780         (eq_dwo_file): Ditto.
3781         (lookup_dwo_file_slot): New arg comp_dir.  All callers updated.
3782         (create_dwo_in_dwp, lookup_dwo_in_dwp, open_and_init_dwo_file): Ditto.
3783
3784         * psymtab.c (read_psymtabs_with_fullname): Don't call
3785         psymtab_to_fullname if the basenames are different.
3786
3787 2013-04-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
3788
3789         * NEWS (Changes in GDB 7.6): Update the data-disassemble for "fullname".
3790         New entry about "fullname" presence.
3791
3792 2013-04-03  Pedro Alves  <palves@redhat.com>
3793
3794         * NEWS: Mention x86_64/Cygwin as new native configuration.
3795
3796 2013-04-02  Doug Evans  <dje@google.com>
3797
3798         * dwarf2read.c (read_structure_type): Fix typo in comment.
3799
3800 2013-04-02  Pedro Alves  <palves@redhat.com>
3801
3802         * NEWS: Mention "set/show debug aarch64", "set/show debug
3803         coff-pe-read" and "set/show debug mach-o".
3804
3805 2013-04-02  Pedro Alves  <palves@redhat.com>
3806
3807         * NEWS: Mention "set/show remote trace-buffer-size-packet".
3808
3809 2013-04-02  Eli Zaretskii  <eliz@gnu.org>
3810
3811         * Makefile.in (HFILES_NO_SRCDIR): Remove call-cmds.h.
3812         gdb_string.h is now in common/.
3813
3814 2013-04-02  Pedro Alves  <palves@redhat.com>
3815
3816         * NEWS: Move "set debug notification" and "set trace-buffer-size"
3817         under "New options".
3818
3819 2013-04-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
3820
3821         Revert this patch:
3822         PR gdb/15275
3823         * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
3824
3825 2013-04-02  Pedro Alves  <palves@redhat.com>
3826
3827         PR gdb/15275
3828
3829         * remote.c (send_interrupt_sequence): Use remote_serial_write.
3830         (remote_serial_write): New function.
3831         (putpkt_binary, getpkt_or_notif_sane_1): Use remote_serial_write.
3832
3833 2013-04-01  Jiong Wang  <jiwang@tilera.com>
3834
3835         * NEWS: Mention TILE-Gx in "New native configurations" and
3836         "New targets" sections.
3837
3838 2013-04-01  Doug Evans  <dje@google.com>
3839
3840         * dwarf2read.c (lookup_signatured_type_at_offset): Delete.
3841         (process_enumeration_scope): Simplify.
3842
3843         * dwarf2read.c (struct dwarf2_per_cu_data): Move member
3844         type_unit_group ...
3845         (struct signatured_type): ... to here.
3846         (sig_type_ptr): New typedef.
3847         (type_unit_group): Delete member 't.first_cu'.  Move member 'tus'
3848         out of union 't'.  All uses updated.
3849         (dw2_get_file_names_reader): Assert not called for a type unit.
3850         (dw2_get_file_names): Assert not called for a type unit or type
3851         unit group.
3852         (build_type_psymtabs_reader): Assert called for a type unit.
3853         (build_type_psymtab_dependencies): Assert called for a type unit group.
3854
3855         * dwarf2read.c (free_dwo_file): Add comment.
3856         (dwarf2_per_objfile_free): Unref dwp bfd.
3857
3858 2013-04-01  Aleksandar Ristovski  <aristovski@qnx.com>
3859
3860         * coff-pe-read.c (add_pe_exported_sym): Remove unused 'dll_name_len'.
3861         (add_pe_forwarded_sym): Remove unused 'section', 'dll_name_len'.
3862         (read_pe_exported_syms): Remove unused 'exportix'.
3863         (pe_text_section_offset): Remove unused 'opthdr_ofs', 'num_entries',
3864         'export_rva', 'export_size', 'expptr', 'exp_funcbase', 'expdata',
3865         'erva', 'name_rvas', 'ordinals', 'nexp', 'ordbase', 'dll_name'.
3866
3867 2013-04-01  Aleksandar Ristovski  <aristovski@qnx.com>
3868
3869         * breakpoint.c (parse_cond_to_aexpr): Remove unused 'old_chain'.
3870         (print_it_watchpoint): Remove unused 'bl'.
3871         (say_where): Remove unused 'uiout'.
3872         (bpstat_remove_breakpoint_callback): Remove unused 'uiout'.
3873         (bkpt_breakpoint_hit): Remove unused 'b'.
3874         (internal_bkpt_print_it): Remove unused 'uiout'.
3875         * buildsym.c (augment_type_symtab): Remove unused 'i'.
3876
3877 2013-03-31  Tiago Stürmer Daitx  <tdaitx@linux.vnet.ibm.com>
3878
3879         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_float): New function.
3880         (ppc64_sysv_abi_push_dummy_call): Handle complex arguments.
3881
3882 2013-03-29  Doug Evans  <dje@google.com>
3883
3884         * dwarf2read.c (open_dwo_file): Renamed from open_dwop_file.
3885         Delete arg is_dwp.  All callers updated.
3886         (open_dwp_file): New function.
3887         (open_and_init_dwp_file): Call it.
3888         (get_dwp_file): New function.
3889         (lookup_dwo_cutu): Call it.
3890
3891         * dwarf2read.c (open_and_init_dwp_file): Remove incorrect, and
3892         unnecessary, cleanup.
3893
3894         * dwarf2read.c (lookup_dwo_cutu): Improve complaint text.
3895
3896         * dwarf2read.c (read_cutu_die_from_dwo): New function.
3897         (lookup_dwo_unit): New function.
3898         (init_cutu_and_read_dies): Move DWO handling to new functions.
3899
3900         * dwarf2read.c (struct signatured_type): Tweak comment.
3901         (struct dwo_unit): Tweak comment.
3902         (create_debug_types_hash_table): Tweak comment.  Reformat long line.
3903         (create_dwo_debug_info_hash_table): Tweak comment.
3904         (dwarf2_per_cu_offset_and_type): Tweak comment.
3905
3906         * dwarf2read.c (lookup_signatured_type): Remove complaint about
3907         missing .debug_types section.
3908
3909 2013-03-29  Yao Qi  <yao@codesourcery.com>
3910
3911         * corelow.c: Include "completer.h".
3912         (_initialize_corelow): Call add_target_with_completer with
3913         argument 'filename_completer'.
3914         * tracepoint.c: Likewise.
3915         * exec.c (_initialize_exec): Likewise.
3916         * target.c (add_target): Rename to ...
3917         (add_target_with_completer): ... this.  Call set_cmd_completer
3918         if parameter completer is not NULL.
3919         (add_target): New.
3920         * target.h: Include "command.h".
3921         (add_target_with_completer): Declare it.
3922
3923 2013-03-28  Joel Brobecker  <brobecker@adacore.com>
3924
3925         * coffread.c (is_import_fixup_symbol): New function.
3926         (record_minimal_symbol): Use is_import_fixup_symbol to
3927         detect import fixup symbols, and discard them.
3928
3929 2013-03-28  Doug Evans  <dje@google.com>
3930
3931         * dwarf2read.c (create_debug_types_hash_table): Don't allocate the
3932         types hash table until we know we need it.
3933
3934         * dwarf2read.c (create_addrmap_from_index): Complain about bad CU
3935         index numbers.
3936
3937         * dwarf2read.c (dw2_get_file_names): Delete arg "objfile".
3938         All callers updated.
3939         (dw2_print_stats): Print #read CUs too.
3940         (dump_die_shallow): Print signatured types better.
3941
3942         * dwarf2read.c (struct dwarf2_per_cu_data): Rename member
3943         info_or_types_section to section.  All uses updated.
3944         (struct dwo_unit): Ditto.
3945
3946 2013-03-28  Pedro Alves  <palves@redhat.com>
3947
3948         * NEWS (New options): New section.
3949         (New options): Mention set/show remote trace-status-packet.
3950         * remote.c (PACKET_qTStatus): New enumeration value.
3951         (remote_get_trace_status): Skip sending qTStatus if the packet is
3952         disabled.  Use packet_ok.
3953         (_initialize_remote): Register a configuration command for
3954         qTStatus packet.
3955
3956 2013-03-28  Doug Evans  <dje@google.com>
3957
3958         * symfile.c (find_separate_debug_file): Add comment.
3959         (terminate_after_last_dir_separator): Tweak comment.
3960
3961         * dwarf2read.c (create_partial_symtab): Add forward decl.
3962         (create_partial_symtab): Move to be closer to other psymtab functions.
3963         (process_psymtab_comp_unit_reader, process_psymtab_comp_unit): Ditto.
3964
3965         * dwarf2read.c (dwarf2_physname): Move declaration to better spot.
3966         (compute_symtab_includes): Remove unnecessary forward declaration.
3967         (die_needs_namespace): Add comment marking group of functions for
3968         dwarf2 name computation.
3969
3970         * typeprint.c (_initialize_typeprint): Improve type help text.
3971
3972         * python/python.c (finish_python_initialization): Provide suggestion
3973         for how to tell gdb to find its python files.
3974
3975 2013-03-28  Pedro Alves  <palves@redhat.com>
3976
3977         PR gdb/15294
3978
3979         * source.c (_initialize_source): Change back "set listsize" to an
3980         integer command.
3981
3982 2013-03-27  Gareth McMullin  <gareth@blacksphere.co.nz>
3983
3984         PR gdb/15275
3985         * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
3986
3987 2013-03-27  Pedro Alves  <palves@redhat.com>
3988
3989         * top.c (history_size): Rename to ...
3990         (history_size_setshow_var): ... this.  Add comment.
3991         (show_commands): Use readline's 'history_length' instead of
3992         computing the history length by calling history_get in a loop.
3993         (set_history_size_command): Error out for sizes over INT_MAX.
3994         Restore previous history size on invalid size.
3995         (init_history): If HISTSIZE is negative, leave the history size as
3996         zero.  Add comments.
3997         (init_main): Adjust.
3998
3999 2013-03-27  Pedro Alves  <palves@redhat.com>
4000
4001         * coff-pe-read.c (_initialize_coff_pe_read): Rename "set debug
4002         coff_pe_read" command to "set debug coff-pe-read".
4003
4004 2013-03-27  Markus Metzger  <markus.t.metzger@intel.com>
4005
4006         * record.c (command_size_to_target_size): Fix size comparison.
4007         Change parameter type from pointer to integer to integer.
4008         Update all users.
4009
4010 2013-03-27  Pierre Muller  <muller@sourceware.org>
4011
4012         * windows-nat.c (handle_output_debug_string): Avoid typecast
4013         from integer of different size warning.
4014
4015 2013-03-26  Joel Brobecker  <brobecker@adacore.com>
4016
4017         * windows-nat.c (handle_output_debug_string): Add empty line
4018         after local block variable definition.
4019
4020 2013-03-26  Pedro Alves  <palves@redhat.com>
4021
4022         * ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned.
4023         (net_open): Make 'polls' local unsigned.
4024
4025 2013-03-26  Pedro Alves  <palves@redhat.com>
4026
4027         * remote.c (_initialize_remote): Make "set remoteaddresssize"
4028         a zuinteger command instead of uinteger.
4029
4030 2013-03-26  Pedro Alves  <palves@redhat.com>
4031
4032         * record-full.c (record_full_insn_num): Make it unsigned.
4033         (record_full_check_insn_num, record_full_message)
4034         (record_full_registers_change, record_full_xfer_partial): Remove
4035         record_full_insn_max_num check (it's always != 0).
4036         (record_full_info, record_full_restore): Use %u as format string.
4037         (): Use %u as format string.
4038         (set_record_full_insn_max_num): Remove record_full_insn_max_num
4039         check (it's always != 0).
4040
4041 2013-03-26  Pedro Alves  <palves@redhat.com>
4042
4043         * dcache.c (_initialize_dcache): Make the "set dcache line-size"
4044         and "set dcache size" commands zuinteger instead of uinteger.
4045
4046 2013-03-26  Pedro Alves  <palves@redhat.com>
4047
4048         * cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
4049         command zuinteger instead of uinteger.
4050
4051 2013-03-26  Pedro Alves  <palves@redhat.com>
4052
4053         * coff-pe-read.c (_initialize_coff_pe_read): Make the command
4054         zuinteger instead of uinteger.
4055
4056 2013-03-26  Pedro Alves  <palves@redhat.com>
4057
4058         * record.c (record_insn_history_size_setshow_var)
4059         (record_call_history_size_setshow_var): New globals.
4060         (command_size_to_target_size): New function.
4061         (cmd_record_insn_history, cmd_record_call_history): Use
4062         command_size_to_target_size instead of cast.
4063         (validate_history_size, set_record_insn_history_size)
4064         (set_record_call_history_size): New functions.
4065         (_initialize_record): Install set_record_insn_history_size and
4066         set_record_call_history_size as "set" hooks of "set record
4067         instruction-history-size" and "set record
4068         function-call-history-size".
4069
4070 2013-03-26  Pedro Alves  <palves@redhat.com>
4071
4072         * top.c (gdb_rl_operate_and_get_next): Replace max_input_history
4073         use with history_max_entries use.  Remove FIXME note.
4074
4075 2013-03-26  Markus Metzger  <markus.t.metzger@intel.com>
4076
4077         * record-btrace.c (record_btrace_close): Call
4078         record_btrace_auto_disable.
4079
4080 2013-03-25  Joel Brobecker  <brobecker@adacore.com>
4081
4082         * rs6000-nat.c (fixup_breakpoints): Delete declaration.
4083
4084 2013-03-25  Doug Evans  <dje@google.com>
4085
4086         * contrib/cc-with-tweaks.sh: Check exit code of dwp.
4087
4088 2013-03-25  Tom Tromey  <tromey@redhat.com>
4089
4090         PR symtab/11462:
4091         * c-exp.y (exp): Add new productions for destructors after '.' and
4092         '->'.
4093         (write_destructor_name): New function.
4094
4095 2013-03-25  Tom Tromey  <tromey@redhat.com>
4096
4097         PR c++/9197:
4098         * opencl-lang.c (evaluate_subexp_opencl) <STRUCTOP_STRUCT>: Use
4099         value_struct_elt, not lookup_struct_elt_type.
4100         * eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT,
4101         STRUCTOP_PTR>: Use value_struct_elt, not lookup_struct_elt_type.
4102         * expression.h (EVAL_AVOID_SIDE_EFFECTS): Update comment.
4103
4104 2013-03-25  Yao Qi  <yao@codesourcery.com>
4105
4106         * ctf.c [USE_WIN32API]: Undef 'mkdir' and use 'mkdir'
4107         instead of '_mkdir'.
4108
4109 2013-03-23  Eli Zaretskii  <eliz@gnu.org>
4110
4111         * windows-nat.c (windows_get_absolute_argv0): New function.
4112         * windows-nat.h: Add its prototype.
4113
4114         * main.c (get_init_files): Use filename_ncmp instead of strncmp.
4115         Use IS_DIR_SEPARATOR instead of looking for a character inside
4116         SLASH_STRING.  Include filenames.h.
4117         (captured_main) [__MINGW32__]: Make argv[0] absolute, so that
4118         relocate_gdb_directory works when passed gdb_program_name.
4119         Include windows-nat.h.
4120
4121 2013-03-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
4122
4123         * exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
4124         * remote.c (trace_error): Remove the special handling of '2'.
4125         (readchar) <SERIAL_EOF>
4126         (readchar) <SERIAL_ERROR>
4127         (getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
4128         (remote_get_trace_status): Call throw_exception if EX is
4129         TARGET_CLOSE_ERROR.
4130         * utils.c (perror_with_name): Rename to ...
4131         (throw_perror_with_name): ... here.  New parameter errcode, describe it
4132         in the function comment.
4133         (perror_with_name): New function wrapper.
4134         * utils.h (enum errors): New stub declaration.
4135         (throw_perror_with_name): New declaration.
4136
4137 2013-03-22  Pedro Alves  <palves@redhat.com>
4138             Yao Qi  <yao@codesourcery.com>
4139             Mark Kettenis  <kettenis@gnu.org>
4140
4141         * cli/cli-setshow.c (do_set_command) <var_uinteger>:
4142         Don't let the user set the value to UINT_MAX directly.
4143         <var_integer>: Don't let the user set the value to INT_MAX
4144         directly.
4145
4146 2013-03-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
4147
4148         * remote.c (remote_unpush_target): New function.
4149         (remote_open_1): Remove two pop_target calls, update one comment, add
4150         comment to target_preopen call.  Replace pop_target call by
4151         remote_unpush_target call.
4152         (interrupt_query, readchar, getpkt_or_notif_sane_1): Replace
4153         pop_target calls by remote_unpush_target calls.
4154
4155 2013-03-22  Pedro Alves  <palves@redhat.com>
4156
4157         * linux-nat.c (linux_child_follow_fork): Don't call
4158         linux_enable_event_reporting.
4159         (linux_handle_extended_wait): Don't call
4160         linux_enable_event_reporting.
4161
4162 2013-03-22  Pedro Alves  <palves@redhat.com>
4163
4164         * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro,
4165         use it to rewrite the trampoline buffers with type gdb_byte[], and
4166         undefine the macro.  Remove char* cast.
4167
4168 2013-03-21  Doug Evans  <dje@google.com>
4169
4170         New commands "mt set per-command {space,time,symtab} {on,off}".
4171         * NEWS: Add entry.
4172         * event-top.c: #include "maint.h".
4173         * main.c: #include "maint.h".
4174         * maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
4175         timeval-utils.h, maint.h, cli/cli-setshow.h.
4176         (per_command_time, per_command_space): New static globals.
4177         (per_command_symtab): New static global.
4178         (per_command_setlist, per_command_showlist): New static globals.
4179         (struct cmd_stats): Move here from utils.c.
4180         (set_per_command_time): Renamed from set_display_time in utils.c
4181         and moved here.  All callers updated.
4182         (set_per_command_space): Renamed from set_display_space in utils.c
4183         and moved here.  All callers updated.
4184         (count_symtabs_and_blocks): New function.
4185         (report_command_stats): Moved here from utils.c.  Add support for
4186         printing symtab stats.  Only print data if enabled before command
4187         executed.
4188         (make_command_stats_cleanup): Ditto.
4189         (sert_per_command_cmd, show_per_command_cmd): New functions.
4190         (_initialize_maint_cmds): Add new commands
4191         mt set per-command {space,time,symtab} {on,off}.
4192         * maint.h: New file.
4193         * top.c: #include "maint.h".
4194         * utils.c (reset_prompt_for_continue_wait_time): New function.
4195         (get_prompt_for_continue_wait_time): New function.
4196         * utils.h (reset_prompt_for_continue_wait_time): Declare
4197         (get_prompt_for_continue_wait_time): Declare.
4198         (make_command_stats_cleanup): Moved to maint.h.
4199         (set_display_time, set_display_space): Moved to maint.h and renamed
4200         to set_per_command_time, set_per_command_space.
4201         * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
4202         parse_binary_operation and made non-static.  Don't call error,
4203         just return an error marker.  All callers updated.
4204         * cli/cli-setshow.h (parse_cli_boolean_value): Declare.
4205
4206 2013-03-21  Tom Tromey  <tromey@redhat.com>
4207
4208         * symfile.c (alloc_section_addr_info): Update header.  Don't set
4209         'num_sections' field.
4210         (build_section_addr_info_from_section_table): Set 'num_sections'.
4211         (build_section_addr_info_from_bfd): Likewise.
4212         (build_section_addr_info_from_objfile): Remove dead loop
4213         condition.
4214         (free_section_addr_info): Unconditionally call xfree.
4215         (relative_addr_info_to_section_offsets, addrs_section_sort)
4216         (addr_info_make_relative, syms_from_objfile_1): Remove dead loop
4217         condition.
4218         (syms_from_objfile_1): Remove dead 'if' condition.  Check
4219         'num_sections'.
4220         (add_symbol_file_command): Set 'num_sections'.
4221         * symfile-mem.c (symbol_file_add_from_memory): Set
4222         'num_sections'.
4223         * somread.c (som_symfile_offsets): Remove dead loop condition.
4224         * machoread.c (macho_symfile_offsets): Remove dead 'if'.
4225         * jit.c (jit_bfd_try_read_symtab): Set 'num_sections'.
4226
4227 2013-03-21  Tom Tromey  <tromey@redhat.com>
4228
4229         * tracepoint.h (decode_agent_options): Add 'trace_string'
4230         argument.
4231         * tracepoint.c (decode_agent_options): Add 'trace_string'
4232         argument.
4233         (validate_actionline): Update.
4234         (collect_symbol): Add 'trace_string' argument.
4235         (struct add_local_symbols_data) <trace_string>: New field.
4236         (do_collect_symbol): Update.
4237         (add_local_symbols): Add 'trace_string' argument.
4238         (encode_actions_1): Update.
4239         (trace_dump_actions): Update.
4240         * dwarf2loc.c (access_memory): Update.
4241         * ax.h (struct agent_expr) <tracing, trace_string>: New fields.
4242         * ax-general.c (new_agent_expr): Update.
4243         * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
4244         (gen_trace_for_return_address): Add argument.
4245         (trace_kludge, trace_string_kludge): Remove.
4246         * ax-gdb.c (trace_kludge, trace_string_kludge): Remove.
4247         (gen_traced_pop, gen_fetch, gen_bitfield_ref, gen_expr): Update.
4248         (gen_trace_for_var): Add 'trace_string' argument.
4249         (gen_trace_for_expr, gen_trace_for_return_address): Likewise.
4250         (gen_printf, agent_eval_command_one): Update.
4251
4252 2013-03-21  Tom Tromey  <tromey@redhat.com>
4253
4254         PR exp/15109:
4255         * c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
4256         Handle FILENAME token.
4257
4258 2013-03-21  Tom Tromey  <tromey@redhat.com>
4259
4260         * c-exp.y (YYPRINT): Define.
4261         (c_print_token): New function.
4262
4263 2013-03-21  Tom Tromey  <tromey@redhat.com>
4264
4265         * c-exp.y (%union) <sym, ivar, ivec>: Remove.
4266
4267 2013-03-21  Yao Qi  <yao@codesourcery.com>
4268
4269         * ctf.c: Include "gdb_stat.h".
4270         [USE_WIN32API]: New macro 'mkdir'.
4271         (ctf_start): Use permission bits macros if they are defined.
4272
4273 2013-03-20  Keith Seitz  <keiths@redhat.com>
4274
4275         * breakpoint.h (struct breakpoint): Add comment to
4276         extra_string indicating that this member is mallod'd.
4277         * breakpoint.c (base_breakpoint_dtor): Free extra_string.
4278
4279 2013-03-20  Pedro Alves  <palves@redhat.com>
4280
4281         PR gdb/15289
4282
4283         * cli/cli-setshow.c (do_set_command)
4284         <var_uinteger, var_zuinteger>: Use LONGEST for variable holding
4285         the result of parsing the command argument.  Throw error if the
4286         value is greater than UINT_MAX.  Print the invalid value with
4287         plongest.
4288         <var_integer, var_zinteger>: Use LONGEST for variable holding the
4289         result of parsing the command argument.  Throw error if the value
4290         is greater than INT_MAX, not greater or equal.  Also throw error
4291         if the value is less than INT_MIN.  Print the invalid value with
4292         plongest.
4293         <var_zuinteger_unlimited>: Throw error if the value is greater
4294         than INT_MAX, not greater or equal.
4295         (do_show_command) <var_integer, var_zinteger,
4296         var_zuinteger_unlimited>: Use %d for printing int, not %u.
4297
4298 2013-03-20  Tom Tromey  <tromey@redhat.com>
4299
4300         * ax-gdb.c (gen_var_ref): Unconditionally call via computed ops,
4301         if possible.
4302         * dwarf2read.c (read_func_scope): Remove old FIXME.
4303         * eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS,
4304         not LOC_COMPUTED.
4305         * findvar.c (symbol_read_needs_frame, default_read_var_value):
4306         Unconditionally call via computed ops, if possible.
4307         * printcmd.c (address_info): Unconditionally call via computed ops,
4308         if possible.
4309         * stack.c (read_frame_arg): Unconditionally call via computed ops,
4310         if possible.
4311         * symtab.c (register_symbol_computed_impl): Sanity check 'ops'.
4312         * tracepoint.c (scope_info): Unconditionally call via computed ops,
4313         if possible.
4314
4315 2013-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>
4316             Tom Tromey  <tromey@redhat.com>
4317
4318         PR symtab/8421:
4319         * coffread.c (coff_register_index): New global.
4320         (process_coff_symbol, coff_read_enum_type): Set
4321         SYMBOL_ACLASS_INDEX.
4322         (_initialize_coffread): Initialize new global.
4323         * dwarf2loc.c (locexpr_find_frame_base_location)
4324         (dwarf2_block_frame_base_locexpr_funcs)
4325         (loclist_find_frame_base_location)
4326         (dwarf2_block_frame_base_loclist_funcs): New.
4327         (dwarf_expr_frame_base_1): Call SYMBOL_BLOCK_OPS, remove internal_error.
4328         (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Add location_has_loclist.
4329         * dwarf2loc.h (dwarf2_block_frame_base_locexpr_funcs)
4330         (dwarf2_block_frame_base_loclist_funcs): New.
4331         * dwarf2read.c (dwarf2_locexpr_index, dwarf2_loclist_index)
4332         (dwarf2_locexpr_block_index, dwarf2_loclist_block_index): New
4333         globals.
4334         (read_func_scope): Update.
4335         (fixup_go_packaging, mark_common_block_symbol_computed)
4336         (var_decode_location, new_symbol_full, dwarf2_const_value):
4337         Set SYMBOL_ACLASS_INDEX.
4338         (dwarf2_symbol_mark_computed): Likewise.  Add 'is_block' argument.
4339         (_initialize_dwarf2_read): Initialize new globals.
4340         * jit.c (finalize_symtab): Set SYMBOL_ACLASS_INDEX.
4341         * jv-lang.c (add_class_symbol): Set SYMBOL_ACLASS_INDEX.
4342         * mdebugread.c (mdebug_register_index, mdebug_regparm_index): New
4343         globals.
4344         (parse_symbol, psymtab_to_symtab_1): Set SYMBOL_ACLASS_INDEX.
4345         (_initialize_mdebugread): Initialize new globals.
4346         * psympriv.h (struct partial_symbol) <aclass>: Update comment.
4347         * stabsread.c (patch_block_stabs): Set SYMBOL_ACLASS_INDEX.
4348         (stab_register_index, stab_regparm_index): New globals.
4349         (define_symbol, read_enum_type, common_block_end): Set
4350         SYMBOL_ACLASS_INDEX.
4351         (_initialize_stabsread): Initialize new globals.
4352         * symtab.c (next_aclass_value, symbol_impl, symbol_impls): New
4353         globals.
4354         (MAX_SYMBOL_IMPLS): New define.
4355         (register_symbol_computed_impl, register_symbol_block_impl)
4356         (register_symbol_register_impl)
4357         (initialize_ordinary_address_classes): New functions.
4358         (_initialize_symtab): Call initialize_ordinary_address_classes.
4359         * symtab.h (enum address_class) <LOC_FINAL_VALUE>: New constant.
4360         (struct symbol_impl): New.
4361         (SYMBOL_ACLASS_BITS): New define.
4362         (struct symbol) <aclass, ops>: Remove fields.
4363         <aclass_index>: New field.
4364         (symbol_impls): Declare.
4365         (SYMBOL_CLASS, SYMBOL_COMPUTED_OPS, SYMBOL_REGISTER_OPS): Redefine.
4366         (SYMBOL_IMPL, SYMBOL_ACLASS_INDEX): New defines.
4367         (register_symbol_computed_impl, register_symbol_block_impl)
4368         (register_symbol_register_impl): Declare.
4369         (struct symbol_computed_ops): Add location_has_loclist.
4370         (struct symbol_block_ops): New.
4371         (SYMBOL_BLOCK_OPS): New.
4372         * xcoffread.c (process_xcoff_symbol): Set SYMBOL_ACLASS_INDEX.
4373
4374 2013-03-20  Tom Tromey  <tromey@redhat.com>
4375
4376         * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section)
4377         (print_partial_symbols, recursively_search_psymtabs): Use
4378         PSYMBOL_CLASS.
4379
4380 2013-03-20  Pierre Muller  <muller@sourceware.org>
4381
4382         * contrib/ari/gdb_ari.sh (OP eol rule): Also check
4383         addtion, subtraction, multiplication and division binary operator.
4384
4385 2013-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>
4386
4387         Code cleanup.
4388         * bfd-target.c (target_bfd_xclose): Remove parameter quitting.
4389         * bsd-kvm.c (bsd_kvm_close): Likewise.
4390         * bsd-uthread.c (bsd_uthread_close): Likewise.
4391         * corelow.c (core_close): Likewise.
4392         (core_close_cleanup): Remove parameter quitting from a caller.
4393         * event-top.c (async_disconnect): Likewise.
4394         * exec.c (exec_close_1): Remove parameter quitting.
4395         * go32-nat.c (go32_close): Likewise.
4396         * linux-nat.c (linux_nat_close): Remove parameter quitting.  Remove
4397         parameter quitting from a caller.
4398         * mips-linux-nat.c (super_close): Remove parameter quitting from the
4399         variable.
4400         (mips_linux_close): Remove parameter quitting.  Remove parameter
4401         quitting from a caller.
4402         * monitor.c (monitor_close): Remove parameter quitting.
4403         * monitor.h (monitor_close): Likewise.
4404         * record-btrace.c (record_btrace_close): Likewise.
4405         * record-full.c (record_full_close): Likewise.
4406         * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
4407         it also from fprintf_unfiltered.
4408         * remote-mips.c (mips_close): Remove parameter quitting.
4409         (mips_detach): Remove parameter quitting from a caller.
4410         * remote-sim.c (gdbsim_close): Remove parameter quitting.
4411         (gdbsim_close): Remove duplicate function comment.  Remove parameter
4412         quitting and remove it also from printf_filtered.
4413         * remote.c (remote_close): Remove parameter quitting.
4414         * solib-svr4.c (enable_break): Remove parameter quitting from a caller.
4415         * target.c (update_current_target): Remove parameter int from to_close
4416         de_fault.
4417         (push_target, unpush_target, pop_target): Remove parameter quitting from
4418         a caller.
4419         (pop_all_targets_above, pop_all_targets): Remove parameter quitting.
4420         Remove parameter quitting from a caller.
4421         (target_preopen): Remove parameter quitting from a caller.
4422         (target_close): Remove parameter quitting.  Remove parameter quitting
4423         from a caller two times.  Remove parameter quitting also from
4424         fprintf_unfiltered.
4425         * target.h (struct target_ops): Remove parameter quitting and as int
4426         from fields to_xclose and to_close.
4427         (extern struct target_ops current_target):
4428         (target_close, pop_all_targets): Remove parameter quitting.  Update the
4429         comment.
4430         (pop_all_targets_above): Remove parameter quitting.
4431         * top.c (quit_target): Remove parameter quitting from a caller.
4432         * tracepoint.c (tfile_close): Remove parameter quitting.
4433         * windows-nat.c (windows_close): Remove parameter quitting.
4434
4435 2013-03-20  Corinna Vinschen  <vinschen@redhat.com>
4436
4437         * windows-nat.c (handle_output_debug_string): Replace call
4438         to string_to_core_addr with call to strtoull.
4439
4440 2013-03-20  Yao Qi  <yao@codesourcery.com>
4441
4442         * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
4443         and write it to CTF metadata.
4444
4445 2013-03-19  Corinna Vinschen  <vinschen@redhat.com>
4446
4447         * windows-nat.c (handle_output_debug_string): Change type of n to
4448         SIZE_T to avoid crash on 64 bit systems.
4449
4450 2013-03-17  Eli Zaretskii  <eliz@gnu.org>
4451
4452         * python/python-internal.h (HAVE_SNPRINTF)
4453         [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
4454         about redefinition of snprintf by pyerrors.h.
4455
4456 2013-03-15  Steve Ellcey  <sellcey@mips.com>
4457
4458         * remote-sim.c (sim_command_completer): Make char arguments const.
4459
4460 2013-03-15  Tom Tromey  <tromey@redhat.com>
4461
4462         PR c++/15116:
4463         * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
4464
4465 2013-03-14  Tom Tromey  <tromey@redhat.com>
4466
4467         * gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
4468         New fields.
4469         (get_file_crc): Move from symfile.c.
4470         (gdb_bfd_crc): New function.
4471         * gdb_bfd.h (gdb_bfd_crc): Declare.
4472         * objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
4473         * symfile.c (get_file_crc): Move to gdb_bfd.c.
4474         (separate_debug_file_exists): Use gdb_bfd_crc.
4475
4476 2013-03-14  Tom Tromey  <tromey@redhat.com>
4477
4478         * symfile.c (get_debug_link_info): Remove.
4479         (find_separate_debug_file_by_debuglink): Use
4480         bfd_get_debug_link_info.
4481
4482 2013-03-14  Tom Tromey  <tromey@redhat.com>
4483
4484         * symtab.c (error_in_psymtab_expansion): New function.
4485         (lookup_symbol_aux_quick)
4486         (basic_lookup_transparent_type_quick): Remove "last resort"
4487         code.  Use error_in_psymtab_expansion.
4488
4489 2013-03-14  Doug Evans  <dje@google.com>
4490             Jan Kratochvil  <jan.kratochvil@redhat.com>
4491
4492         * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
4493         any successful compare_filenames_for_search or FILENAME_CMP.
4494         * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
4495         * symtab.c (iterate_over_some_symtabs): Likewise.
4496
4497 2013-03-14  Jan Kratochvil  <jan.kratochvil@redhat.com>
4498
4499         * source.c (print_source_lines_base): Make a local copy of
4500         symtab_to_fullname.
4501
4502 2013-03-14  Hui Zhu  <hui_zhu@mentor.com>
4503             Jan Kratochvil  <jan.kratochvil@redhat.com>
4504
4505         * source.c (print_source_lines_base): Suppress "file" for TUI.
4506
4507 2013-03-14  Keith Seitz  <keiths@redhat.com>
4508             Alan Matsuoka  <alanm@redhat.com>
4509
4510         PR c++/15203
4511         PR c++/15210
4512         * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
4513         TYPE_CODE_METHOD.
4514         * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
4515         symbols.
4516
4517 2013-03-14  Yao Qi  <yao@codesourcery.com>
4518
4519         * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
4520         status to tfile if trace is stopped by command 'tstop'.
4521
4522 2013-03-14  Yao Qi  <yao@codesourcery.com>
4523
4524         * tracepoint.c (tfile_write_status): Write trace notes and user
4525         name into tfile if they are not NULL.
4526
4527 2013-03-14  Hui Zhu  <hui@codesourcery.com>
4528             Yao Qi  <yao@codesourcery.com>
4529
4530         * Makefile.in (REMOTE_OBS): Add ctf.o.
4531         (SFILES): Add ctf.c.
4532         (HFILES_NO_SRCDIR): Add ctf.h.
4533         * ctf.c, ctf.h: New files.
4534         * tracepoint.c: Include 'ctf.h'.
4535         (collect_pseudocommand): Remove static.
4536         (trace_save_command): Parse option "-ctf".
4537         Produce different trace file writers per option.
4538         Adjust output message.
4539         (trace_save_tfile, trace_save_ctf): New.
4540         * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
4541         * mi/mi-main.c: Include 'ctf.h'.
4542         (mi_cmd_trace_save): Handle option '-ctf'.  Call either
4543         trace_save_tfile or trace_save_ctf.
4544         * NEWS: Mention these changes.
4545
4546 2013-03-14  Yao Qi  <yao@codesourcery.com>
4547
4548         * tracepoint.c (trace_file_writer_xfree): New.
4549         (struct tfile_writer_data): New.
4550         (tfile_dtor, tfile_can_target_save, tfile_start): New.
4551         (tfile_write_header, tfile_write_regblock_type): New.
4552         (tfile_write_status, tfile_write_uploaded_tsv): New.
4553         (tfile_write_uploaded_tp, tfile_write_definition_end): New.
4554         (tfile_write_raw_data, (tfile_end): New.
4555         (tfile_write_ops): New global variable.
4556         (TRACE_WRITE_R_BLOCK): New macro.
4557         (TRACE_WRITE_M_BLOCK_HEADER): New macro.
4558         (TRACE_WRITE_M_BLOCK_MEMORY): New macro.
4559         (TRACE_WRITE_V_BLOCK): New macro.
4560         (trace_save): Add extra one parameter WRITER.  Make it static.
4561         Use WRITER to writer trace.
4562         (tfile_trace_file_writer_new): New.
4563         (trace_save_command): Caller update.
4564         (trace_save_tfile): Write trace data in TFILE format.
4565         * tracepoint.h (struct trace_frame_write_ops): New.
4566         (struct trace_file_write_ops): New.
4567         (struct trace_file_writer): New.
4568         (trace_save): Remove its declaration.
4569         (trace_save_tfile): Declare it.
4570         * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
4571         instead of trace_save.
4572
4573 2013-03-13  Pedro Alves  <palves@redhat.com>
4574
4575         * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.
4576
4577 2013-03-13  Pedro Alves  <palves@redhat.com>
4578
4579         * dbxread.c (read_ofile_symtab, process_one_symbol): Remove
4580         commented out code.
4581         * demangle.c (current_demangling_style_string): Make it const.
4582         (set_demangling_command): Assert the demangling style is known.
4583         Remove all handling of unknown styles.  Set
4584         'current_demangling_style_string' to an element of the
4585         demangling_style_names array.
4586         (set_demangling_style): Delete.
4587         (_initialize_demangler): Set current_demangling_style_string to the
4588         element of the demangling_style_names array that corresponds to
4589         the default demangling style.  Remove FIXME note.  Don't call
4590         set_demangling_style.
4591         * gdb-demangle.h (set_demangling_style): Remove declaration.
4592
4593 2013-03-13  Pedro Alves  <palves@redhat.com>
4594
4595         * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
4596         fields const.
4597         (ada_make_symbol_completion_list): Make "text0" parameter const.
4598         * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
4599         * breakpoint.c (condition_completer): Make "text" and "word"
4600         parameters const.  Adjust.
4601         (check_tracepoint_command): Adjust to validate_actionline
4602         prototype change.
4603         (catch_syscall_completer): Make "text" and "word" parameters
4604         const.
4605         * cli/cli-cmds.c (show_user): Make "comname" local const.
4606         (valid_command_p): Make "command" parameter const.
4607         (alias_command): Make "alias_prefix" and "command_prefix" locals
4608         const.
4609         * cli/cli-decode.c (add_cmd): Make "name" parameter const.
4610         (add_alias_cmd): Make "name" and "oldname" parameters const.
4611         Adjust.  No longer make copy of OLDNAME.
4612         (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
4613         (add_setshow_cmd_full, add_setshow_enum_cmd)
4614         (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
4615         (add_setshow_filename_cmd, add_setshow_string_cmd)
4616         (add_setshow_string_noescape_cmd)
4617         (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
4618         (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
4619         (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
4620         (delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
4621         Make "name" parameter const.
4622         (help_cmd): Rename "command" parameter to "arg".  New const local
4623         "command".
4624         (find_cmd): Make "command" parameter const.
4625         (lookup_cmd_1): Make "text" parameter pointer to const.  Adjust to
4626         deprecated_cmd_warning prototype change.
4627         (undef_cmd_error): Make "cmdtype" parameter const.
4628         (lookup_cmd): Make "line" parameter const.
4629         (deprecated_cmd_warning): Change type of "text" parameter to
4630         pointer to const char, from pointer to pointer to char.  Adjust.
4631         (lookup_cmd_composition): Make "text" parameter const.
4632         (complete_on_cmdlist, complete_on_enum): Make "text" and "word"
4633         parameters const.
4634         * cli/cli-decode.h (struct cmd_list_element) <name>: Make field
4635         const.
4636         * cli/cli-script.c (validate_comname): Make "tem" local const.
4637         (define_command): New const local "tem_c".  Use it in calls to
4638         lookup_cmd.
4639         (document_command): Make "tem" and "comfull" locals const.
4640         (show_user_1): Make "prefix" and "name" parameters const.
4641         * cli-script.h (show_user_1): Make "prefix" and "name" parameters
4642         const.
4643         * command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
4644         (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
4645         (deprecated_cmd_warning, lookup_cmd_composition, add_com)
4646         (add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
4647         (complete_on_enum, add_setshow_enum_cmd)
4648         (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
4649         (add_setshow_filename_cmd, add_setshow_string_cmd)
4650         (add_setshow_string_noescape_cmd)
4651         (add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
4652         (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
4653         (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
4654         Change prototypes, constifying strings.
4655         * completer.c (noop_completer, filename_completer): Make "text"
4656         and "prefix" parameters const.
4657         (location_completer, expression_completer)
4658         (complete_line_internal): Make "text" and "prefix" parameters
4659         const and adjust.
4660         (command_completer, signal_completer): Make "text" and "prefix"
4661         parameters const.
4662         * completer.h (noop_completer, filename_completer)
4663         (expression_completer, location_completer, command_completer)
4664         (signal_completer): Change prototypes.
4665         * corefile.c (complete_set_gnutarget): Make "text" and "word"
4666         parameters const.
4667         * cp-abi.c (cp_abi_completer): Likewise.
4668         * expression.h (parse_expression_for_completion): Change
4669         prototype.
4670         * f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
4671         parameters const.
4672         * infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
4673         * infrun.c (handle_completer): Make "text" and "word" parameters
4674         const.
4675         * interps.c (interpreter_completer): Make "text" and "word"
4676         parameters const.
4677         * language.h (struct language_defn)
4678         <la_make_symbol_completion_list>: Make "text" and "word"
4679         parameters const.
4680         * parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
4681         (parse_exp_in_context): Rename to ...
4682         (parse_exp_in_context_1): ... this.
4683         (parse_exp_in_context): Reimplement, with const hack from
4684         parse_exp_1.
4685         (parse_expression_for_completion): Make "string" parameter const.
4686         * printcmd.c (decode_format): Make "string_ptr" parameter pointer
4687         to pointer to const char.  Adjust.
4688         (print_command_1): Make "exp" parameter const.
4689         (output_command): Rename to ...
4690         (output_command_const): ... this.  Make "exp" parameter const.
4691         (output_command): Reimplement.
4692         (x_command): Adjust.
4693         (display_command): Rename "exp" parameter to "arg".  New "exp"
4694         local, const version of "arg".
4695         * python/py-auto-load.c (gdbpy_initialize_auto_load): Make
4696         "cmd_name" local const.
4697         * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
4698         call.
4699         (cmdpy_completer): Make "text" and "word" parameters const.
4700         (gdbpy_parse_command_name): Make "prefix_text2" local const.
4701         * python/py-param.c (add_setshow_generic): Make "tmp_name" local
4702         const.
4703         * remote.c (_initialize_remote): Make "cmd_name" local const.
4704         * symtab.c (language_search_unquoted_string): Make "text" and "p"
4705         parameters const.  Adjust.
4706         (completion_list_add_fields): Make "sym_text", "text" and "word"
4707         parameters const.
4708         (struct add_name_data) <sym_text, text, word>: Make fields const.
4709         (default_make_symbol_completion_list_break_on): Make "text" and
4710         "word" parameters const.  Adjust locals.
4711         (default_make_symbol_completion_list)
4712         (make_symbol_completion_list, make_symbol_completion_type)
4713         (make_symbol_completion_list_fn): Make "text" and "word"
4714         parameters const.
4715         (make_file_symbol_completion_list): Make "text", "word" and
4716         "srcfile" parameters const.  Adjust locals.
4717         (add_filename_to_list): Make "text" and "word" parameters const.
4718         (struct add_partial_filename_data) <text, word>: Make fields
4719         const.
4720         (make_source_files_completion_list): Make "text" and "word"
4721         parameters const.
4722         * symtab.h (default_make_symbol_completion_list_break_on)
4723         (default_make_symbol_completion_list, make_symbol_completion_list)
4724         (make_symbol_completion_type enum type_code)
4725         (make_symbol_completion_list_fn make_file_symbol_completion_list)
4726         (make_source_files_completion_list): Change prototype.
4727         * top.c (execute_command): Adjust to pass pointer to pointer to
4728         const char to lookup_cmd, and to deprecated_cmd_warning prototype
4729         change.
4730         (set_verbose): Make "cmdname" local const.
4731         * tracepoint.c (decode_agent_options): Make "exp" parameter const,
4732         and adjust.
4733         (validate_actionline): Make "line" parameter a pointer to const
4734         char, and adjust.
4735         (encode_actions_1): Make "action_exp" local const, and adjust.
4736         (encode_actions): Adjust.
4737         (replace_comma): Delete.
4738         (trace_dump_actions): Make "action_exp" and "next_comma" locals
4739         const, and adjust.  Don't frob the action string while splitting
4740         it at commas.  Instead, make a copy of each split substring in
4741         turn.
4742         (trace_dump_command): Adjust to validate_actionline prototype
4743         change.
4744         * tracepoint.h (decode_agent_options, decode_agent_options)
4745         (encode_actions, validate_actionline): Change prototypes.
4746         * valprint.h (output_command): Delete declaration.
4747         (output_command_const): Declare.
4748         * value.c (function_destroyer): Cast const away in xfree call.
4749
4750 2013-03-13  Pedro Alves  <palves@redhat.com>
4751
4752         * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
4753         rather than casting 'const char * const *' to 'const char **'.
4754         * ada-lex.l (processInt): Make "trailer" local const.  Remove
4755         'const char **' cast.
4756         * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
4757         locals, and use those as strtol output pointer, instead than doing
4758         invalid casts to from 'const char **' to 'char **'.
4759         (_initialize_demangle): Remove cast.
4760         * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
4761         locals, and use those as strtol output pointer, instead than doing
4762         invalid casts to from 'const char **' to 'char **'.
4763         * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
4764         casts.
4765         * stap-probe.c (stap_parse_register_operand)
4766         (stap_parse_single_operand): Likewise.
4767
4768 2013-03-13  Yao Qi  <yao@codesourcery.com>
4769
4770         * tracepoint.c (tfile_get_trace_state_variable_value): Look for
4771         the last matched 'V' blcok in trace frame.
4772
4773 2013-03-12  Joel Brobecker  <brobecker@adacore.com>
4774
4775         * NEWS: Create a new section for the next release branch.
4776         Rename the section of the current branch, now that it has
4777         been cut.
4778
4779 2013-03-12  Joel Brobecker  <brobecker@adacore.com>
4780
4781         GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC)
4782         * version.in: Bump version to 7.6.50.20130312-cvs.
4783
4784 2013-03-12  Keith Seitz  <keiths@redhat.com>
4785
4786         * mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
4787         * mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
4788         Remove temporary copy of input string.
4789         (mi_execute_command_wrapper): Make "cmd" const.
4790         * mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
4791         * mi/mi-parse.c (mi_parse_argv): Make "args" const.
4792         Use const strings.
4793         (mi_parse): Make "cmd" const.
4794         Use const strings.
4795         * mi/mi-parse.h (mi_parse): Make "cmd" const.
4796
4797 2013-03-12  Keith Seitz  <keiths@redhat.com>
4798
4799         * ada-lang.c (ada_read_renaming_var_value): Pass const
4800         pointer to expression string to parse_exp_1.
4801         (create_excep_cond_exprs): Likewise.
4802         * ax-gdb.c (agent_eval_command_one): Likewise.
4803         (maint_agent_printf_command): Likewise.
4804         Constify much of the string handling/parsing.
4805         * breakpoint.c (set_breakpoint_condition): Pass const
4806         pointer to expression string to parse_exp_1.
4807         (update_watchpoint): Likewise.
4808         (parse_cmd_to_aexpr): Constify string handling.
4809         Pass const pointer to parse_exp_1.
4810         (init_breakpoint_sal): Pass const pointer to parse_exp_1.
4811         (find_condition_and_thread): Likewise.
4812         Make TOK const.
4813         (watch_command_1): Make "arg" const.
4814         Constify string handling.
4815         Copy the expression string instead of changing the input
4816         string.
4817         (update_breakpoint_location): Pass const pointer to
4818         parse_exp_1.
4819         * eval.c (parse_and_eval_address): Make "exp" const.
4820         (parse_to_comma_and_eval): Make "expp" const.
4821         (parse_and_eval): Make "exp" const.
4822         * expression.h (parse_expression): Make argument const.
4823         (parse_exp_1): Make first argument const.
4824         * findcmd.c (parse_find_args): Treat "args" as const.
4825         * linespec.c (parse_linespec): Pass const pointer to
4826         linespec_expression_to_pc.
4827         (linespec_expression_to_pc): Make "exp_ptr" const.
4828         * parse.c (parse_exp_1): Make "stringptr" const.
4829         Make a copy of the expression to pass to parse_exp_in_context until
4830         this whole interface can be constified.
4831         (parse_expression): Make "string" const.
4832         * printcmd.c (ui_printf): Treat "arg" as const.
4833         Handle const strings.
4834         * tracepoint.c (validate_actionline): Pass const pointer to
4835         all calls to parse_exp_1.
4836         (encode_actions_1): Likewise.
4837         * value.h (parse_to_comma_and_eval): Make argument const.
4838         (parse_and_eval_address): Likewise.
4839         (parse_and_eval): Likewise.
4840         * varobj.c (varobj_create): Pass const pointer to parse_exp_1.
4841         (varobj_set_value): Likewise.
4842         * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
4843         constify string handling.
4844         Pass const pointers to parse_and_eval_address and
4845         parse_to_comman_and_eval.
4846         * cli/cli-utils.c (skip_to_space): Rename to ...
4847         (skip_to_space_const): ... this. Handle const strings.
4848         * cli/cli-utils.h (skip_to_space): Turn into macro which invokes
4849         skip_to_space_const.
4850         (skip_to_space_const): Declare.
4851         * common/format.c (parse_format_string): Make "arg" const.
4852         Handle const strings.
4853         * common/format.h (parse_format_string): Make "arg" const.
4854         * gdbserver/ax.c (ax_printf): Make "format" const.
4855         * python/python.c (gdbpy_parse_and_eval): Do not make a copy
4856         of the expression string.
4857
4858 2013-03-12  Hui Zhu  <hui@codesourcery.com>
4859
4860         * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.
4861
4862 2013-03-12  Yao Qi  <yao@codesourcery.com>
4863             Hui Zhu  <hui@codesourcery.com>
4864
4865         * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
4866         (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
4867         DW_OP_deref_size.
4868
4869 2013-03-12  Paul Hilfinger  <hilfingr@adacore.com>
4870
4871         * ada-lex.l (rules): Only recognize 'thread' as a
4872         delimiter when followed by numerals, as for c-exp.y.
4873         Use new rewind_to_char function to rewind the input for
4874         expression-delimiting tokens.
4875         (rewind_to_char): New function.
4876
4877 2013-03-11  Pedro Alves  <palves@redhat.com>
4878             Jan Kratochvil  <jan.kratochvil@redhat.com>
4879
4880         * configure: Regenerate.
4881         * configure.ac (check dynamic export flag): Link python test with
4882         $PYTHON_LIBS.
4883
4884 2013-03-11  Doug Evans  <dje@google.com>
4885             Keith Seitz  <keiths@redhat.com>
4886
4887         * linespec.c (find_linespec_symbols): Call find_function_symbols
4888         first, and then call lookup_prefix_sym/find_method.
4889
4890 2013-03-11  Pedro Alves  <palves@redhat.com>
4891
4892         * charset.c (convert_between_encodings): Don't cast between
4893         different pointer to pointer types.  Instead, make the 'inp' local
4894         be of the type iconv expects.
4895         (wchar_iterate): Don't cast between different pointer to pointer
4896         types.  Instead, use new pointer local of the type iconv expects.
4897         * target.c (target_read_stralloc, target_fileio_read_stralloc):
4898         Add new local of type char pointer, and use it to get a
4899         char/string view of the byte buffer, instead of casting between
4900         pointer to pointer types.
4901
4902 2013-03-11  Hafiz Abid Qadeer  <abidh@codesourcery.com>
4903
4904         * remote.c (remote_set_trace_buffer_size): Move != operator
4905         to the start of next line to fix an ARI warning.
4906
4907 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
4908
4909         * NEWS: Add record changes.
4910
4911 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
4912
4913         * record-btrace.c (btrace_insn_history): Omit the pc prefix in
4914         the instruction history disassembly.
4915         * disasm.c (dump_insns): Omit the pc prefix, if requested.
4916         * disasm.h (DISASSEMBLY_OMIT_PC): New.
4917
4918 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
4919
4920         * Makefile.in (SFILES): Add record-btrace.c
4921         (COMMON_OBS): Add record-btrace.o
4922         * record-btrace.c: New.
4923         * objfiles.c: Include btrace.h.
4924         (free_objfile): call btrace_free_objfile.
4925
4926 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
4927
4928         * target.c (target_call_history, target_call_history_from,
4929         target_call_history_range): New.
4930         * target.h (target_ops) <to_call_history, to_call_history_from,
4931         to_call_history_range>: New fields.
4932         (target_call_history, target_call_history_from,
4933         target_call_history_range): New declaration.
4934         * record.c (get_call_history_modifiers, cmd_record_call_history,
4935         record_call_history_size): New.
4936         (_initialize_record): Add the "record function-call-history" command.
4937         Add "set/show record function-call-history-size" commands.
4938         * record.h (record_print_flag): New.
4939
4940 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
4941
4942         * target.h (target_ops) <to_insn_history, to_insn_history_from,
4943         to_insn_history_range>: New fields.
4944         (target_insn_history): New.
4945         (target_insn_history_from): New.
4946         (target_insn_history_range): New.
4947         * target.c (target_insn_history): New.
4948         (target_insn_history_from): New.
4949         (target_insn_history_range): New.
4950         * record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
4951         (record_insn_history_size): New.
4952         (get_insn_number): New.
4953         (get_context_size): New.
4954         (no_chunk): New.
4955         (get_insn_history_modifiers): New.
4956         (cmd_record_insn_history): New.
4957         (_initialize_record): Add "set/show record instruction-history-size"
4958         command. Add "record instruction-history" command.
4959
4960 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
4961
4962         * record.h (record_disconnect): New.
4963         (record_detach): New.
4964         (record_mourn_inferior): New.
4965         (record_kill): New.
4966         * record-full.c (record_disconnect, record_detach,
4967         record_mourn_inferior, record_kill): Move to...
4968         * record.c: ...here.
4969         (DEBUG): New.
4970         (record_stop): New.
4971         (record_unpush): New.
4972         (cmd_record_stop): Call record_stop. Replace unpush_target
4973         call with record_unpush call.
4974         (record_disconnect, record_detach): Assert that the target
4975         is of record stratum. Call record_unpush, record_stop, and
4976         DEBUG.
4977         (record_mourn_inferior, record_kill): Assert that the target
4978         is of record stratum. Call record_unpush and DEBUG.
4979
4980 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
4981
4982         * record-full.h, record-full.c (record_memory_query): Rename
4983         to ...
4984         (record_full_memory_query): ...this. Update all users.
4985         (record_arch_list_add_reg): Rename to ...
4986         (record_full_arch_list_add_reg): ...this. Update all users.
4987         (record_arch_list_add_mem): Rename to ...
4988         (record_full_arch_list_add_mem): ...this. Update all users.
4989         (record_arch_list_add_end): Rename to ...
4990         (record_full_arch_list_add_end): ...this. Update all users.
4991         (record_gdb_operation_disable_set): Rename to ...
4992         (record_full_gdb_operation_disable_set): ...this.
4993         Update all users.
4994
4995 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
4996
4997         * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
4998         (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
4999         (RECORD_IS_REPLAY): Renamed to ...
5000         (RECORD_FULL_IS_REPLAY): ... this. Updated all users.
5001         (RECORD_FILE_MAGIC): Renamed to ...
5002         (RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
5003         (record_mem_entry): Renamed to ...
5004         (record_full_mem_entry): ... this. Updated all users.
5005         (record_reg_entry): Renamed to ...
5006         (record_full_reg_entry): ... this. Updated all users.
5007         (record_end_entry): Renamed to ...
5008         (record_full_end_entry): ... this. Updated all users.
5009         (record_type) <record_end, record_reg, record_mem>: Renamed
5010         to ...
5011         (record_full_type) <record_full_end, record_full_reg,
5012         record_full_mem>: ... this. Updated all users.
5013         (record_entry): Renamed to ...
5014         (record_full_entry): ... this. Updated all users.
5015         (record_core_buf_entry): Renamed to ...
5016         (record_full_core_buf_entry): ... this. Updated all users.
5017         (record_core_regbuf): Renamed to ...
5018         (record_full_core_regbuf): ... this. Updated all users.
5019         (record_core_start): Renamed to ...
5020         (record_full_core_start): ... this. Updated all users.
5021         (record_core_end): Renamed to ...
5022         (record_full_core_end): ... this. Updated all users.
5023         (record_core_buf_list): Renamed to ...
5024         (record_full_core_buf_list): ... this. Updated all users.
5025         (record_first): Renamed to ...
5026         (record_full_first): ... this. Updated all users.
5027         (record_list): Renamed to ...
5028         (record_full_list): ... this. Updated all users.
5029         (record_arch_list_head): Renamed to ...
5030         (record_full_arch_list_head): ... this. Updated all users.
5031         (record_arch_list_tail): Renamed to ...
5032         (record_full_arch_list_tail): ... this. Updated all users.
5033         (record_stop_at_limit): Renamed to ...
5034         (record_full_stop_at_limit): ... this. Updated all users.
5035         (record_insn_max_num): Renamed to ...
5036         (record_full_insn_max_num): ... this. Updated all users.
5037         (record_insn_num): Renamed to ...
5038         (record_full_insn_num): ... this. Updated all users.
5039         (record_insn_count): Renamed to ...
5040         (record_full_insn_count): ... this. Updated all users.
5041         (record_ops): Renamed to ...
5042         (record_full_ops): ... this. Updated all users.
5043         (record_core_ops): Renamed to ...
5044         (record_full_core_ops): ... this. Updated all users.
5045         (set_record_cmdlist): Renamed to ...
5046         (set_record_full_cmdlist): ... this. Updated all users.
5047         (show_record_cmdlist): Renamed to ...
5048         (show_record_full_cmdlist): ... this. Updated all users.
5049         (record_cmdlist): Renamed to ...
5050         (record_full_cmdlist): ... this. Updated all users.
5051         (record_beneath_to_resume_ops): Renamed to ...
5052         (record_full_beneath_to_resume_ops): ... this. Updated all users.
5053         (record_beneath_to_resume): Renamed to ...
5054         (record_full_beneath_to_resume): ... this. Updated all users.
5055         (record_beneath_to_wait_ops): Renamed to ...
5056         (record_full_beneath_to_wait_ops): ... this. Updated all users.
5057         (record_beneath_to_wait): Renamed to ...
5058         (record_full_beneath_to_wait): ... this. Updated all users.
5059         (record_beneath_to_store_registers_ops): Renamed to ...
5060         (record_full_beneath_to_store_registers_ops): ... this.
5061         Updated all users.
5062         (record_beneath_to_store_registers): Renamed to ...
5063         (record_full_beneath_to_store_registers): ... this.
5064         Updated all users.
5065         (record_beneath_to_xfer_partial_ops): Renamed to ...
5066         (record_full_beneath_to_xfer_partial_ops): ... this.
5067         Updated all users.
5068         (record_beneath_to_xfer_partial): Renamed to ...
5069         (record_full_beneath_to_xfer_partial): ... this.
5070         Updated all users.
5071         (record_beneath_to_insert_breakpoint): Renamed to ...
5072         (record_full_beneath_to_insert_breakpoint): ... this.
5073         Updated all users.
5074         (record_beneath_to_stopped_by_watchpoint): Renamed to ...
5075         (record_full_beneath_to_stopped_by_watchpoint): ... this.
5076         Updated all users.
5077         (record_beneath_to_stopped_data_address): Renamed to ...
5078         (record_full_beneath_to_stopped_data_address): ... this.
5079         Updated all users.
5080         (record_beneath_to_async): Renamed to ...
5081         (record_full_beneath_to_async): ... this. Updated all users.
5082         (record_goto_insn): Renamed to ...
5083         (record_full_goto_insn): ... this. Updated all users.
5084         (record_save): Renamed to ...
5085         (record_full_save): ... this. Updated all users.
5086         (record_reg_alloc): Renamed to ...
5087         (record_full_reg_alloc): ... this. Updated all users.
5088         (record_reg_release): Renamed to ...
5089         (record_full_reg_release): ... this. Updated all users.
5090         (record_mem_alloc): Renamed to ...
5091         (record_full_mem_alloc): ... this. Updated all users.
5092         (record_mem_release): Renamed to ...
5093         (record_full_mem_release): ... this. Updated all users.
5094         (record_end_alloc): Renamed to ...
5095         (record_full_end_alloc): ... this. Updated all users.
5096         (record_end_release): Renamed to ...
5097         (record_full_end_release): ... this. Updated all users.
5098         (record_entry_release): Renamed to ...
5099         (record_full_entry_release): ... this. Updated all users.
5100         (record_list_release): Renamed to ...
5101         (record_full_list_release): ... this. Updated all users.
5102         (record_list_release_following): Renamed to ...
5103         (record_full_list_release_following): ... this.
5104         Updated all users.
5105         (record_list_release_first): Renamed to ...
5106         (record_full_list_release_first): ... this. Updated all users.
5107         (record_arch_list_add): Renamed to ...
5108         (record_full_arch_list_add): ... this. Updated all users.
5109         (record_get_loc): Renamed to ...
5110         (record_full_get_loc): ... this. Updated all users.
5111         (record_check_insn_num): Renamed to ...
5112         (record_full_check_insn_num): ... this. Updated all users.
5113         (record_arch_list_cleanups): Renamed to ...
5114         (record_full_arch_list_cleanups): ... this. Updated all users.
5115         (record_message): Renamed to ...
5116         (record_full_message): ... this. Updated all users.
5117         (record_message_wrapper): Renamed to ...
5118         (record_full_message_wrapper): ... this. Updated all users.
5119         (record_message_wrapper_safe): Renamed to ...
5120         (record_full_message_wrapper_safe): ... this. Updated all users.
5121         (record_gdb_operation_disable): Renamed to ...
5122         (record_full_gdb_operation_disable): ... this. Updated all users.
5123         (record_hw_watchpoint): Renamed to ...
5124         (record_full_hw_watchpoint): ... this. Updated all users.
5125         (record_exec_insn): Renamed to ...
5126         (record_full_exec_insn): ... this. Updated all users.
5127         (record_restore): Renamed to ...
5128         (record_full_restore): ... this. Updated all users.
5129         (record_async_inferior_event_token): Renamed to ...
5130         (record_full_async_inferior_event_token): ... this.
5131         Updated all users.
5132         (record_async_inferior_event_handler): Renamed to ...
5133         (record_full_async_inferior_event_handler): ... this.
5134         Updated all users.
5135         (record_core_open_1): Renamed to ...
5136         (record_full_core_open_1): ... this. Updated all users.
5137         (record_open_1): Renamed to ...
5138         (record_full_open_1): ... this. Updated all users.
5139         (record_open): Renamed to ...
5140         (record_full_open): ... this. Updated all users.
5141         (record_close): Renamed to ...
5142         (record_full_close): ... this. Updated all users.
5143         (record_resume_step): Renamed to ...
5144         (record_full_resume_step): ... this. Updated all users.
5145         (record_resumed): Renamed to ...
5146         (record_full_resumed): ... this. Updated all users.
5147         (record_execution_dir): Renamed to ...
5148         (record_full_execution_dir): ... this. Updated all users.
5149         (record_resume): Renamed to ...
5150         (record_full_resume): ... this. Updated all users.
5151         (record_get_sig): Renamed to ...
5152         (record_full_get_sig): ... this. Updated all users.
5153         (record_sig_handler): Renamed to ...
5154         (record_full_sig_handler): ... this. Updated all users.
5155         (record_wait_cleanups): Renamed to ...
5156         (record_full_wait_cleanups): ... this. Updated all users.
5157         (record_wait_1): Renamed to ...
5158         (record_full_wait_1): ... this. Updated all users.
5159         (record_wait): Renamed to ...
5160         (record_full_wait): ... this. Updated all users.
5161         (record_stopped_by_watchpoint): Renamed to ...
5162         (record_full_stopped_by_watchpoint): ... this. Updated all users.
5163         (record_disconnect): Renamed to ...
5164         (record_full_disconnect): ... this. Updated all users.
5165         (record_detach): Renamed to ...
5166         (record_full_detach): ... this. Updated all users.
5167         (record_mourn_inferior): Renamed to ...
5168         (record_full_mourn_inferior): ... this. Updated all users.
5169         (record_kill): Renamed to ...
5170         (record_full_kill): ... this. Updated all users.
5171         (record_stopped_data_address): Renamed to ...
5172         (record_full_stopped_data_address): ... this. Updated all users.
5173         (record_registers_change): Renamed to ...
5174         (record_full_registers_change): ... this. Updated all users.
5175         (record_store_registers): Renamed to ...
5176         (record_full_store_registers): ... this. Updated all users.
5177         (record_xfer_partial): Renamed to ...
5178         (record_full_xfer_partial): ... this. Updated all users.
5179         (record_breakpoint): Renamed to ...
5180         (record_full_breakpoint): ... this. Updated all users.
5181         (record_breakpoint_p): Renamed to ...
5182         (record_full_breakpoint_p): ... this. Updated all users.
5183         (record_breakpoints): Renamed to ...
5184         (record_full_breakpoints): ... this. Updated all users.
5185         (record_sync_record_breakpoints): Renamed to ...
5186         (record_full_sync_record_breakpoints): ... this.
5187         Updated all users.
5188         (record_init_record_breakpoints): Renamed to ...
5189         (record_full_init_record_breakpoints): ... this.
5190         Updated all users.
5191         (record_insert_breakpoint): Renamed to ...
5192         (record_full_insert_breakpoint): ... this. Updated all users.
5193         (record_remove_breakpoint): Renamed to ...
5194         (record_full_remove_breakpoint): ... this. Updated all users.
5195         (record_can_execute_reverse): Renamed to ...
5196         (record_full_can_execute_reverse): ... this. Updated all users.
5197         (record_get_bookmark): Renamed to ...
5198         (record_full_get_bookmark): ... this. Updated all users.
5199         (record_goto_bookmark): Renamed to ...
5200         (record_full_goto_bookmark): ... this. Updated all users.
5201         (record_async): Renamed to ...
5202         (record_full_async): ... this. Updated all users.
5203         (record_can_async_p): Renamed to ...
5204         (record_full_can_async_p): ... this. Updated all users.
5205         (record_is_async_p): Renamed to ...
5206         (record_full_is_async_p): ... this. Updated all users.
5207         (record_execution_direction): Renamed to ...
5208         (record_full_execution_direction): ... this. Updated all users.
5209         (record_info): Renamed to ...
5210         (record_full_info): ... this. Updated all users.
5211         (record_delete): Renamed to ...
5212         (record_full_delete): ... this. Updated all users.
5213         (record_is_replaying): Renamed to ...
5214         (record_full_is_replaying): ... this. Updated all users.
5215         (record_goto_entry): Renamed to ...
5216         (record_full_goto_entry): ... this. Updated all users.
5217         (record_goto_begin): Renamed to ...
5218         (record_full_goto_begin): ... this. Updated all users.
5219         (record_goto_end): Renamed to ...
5220         (record_full_goto_end): ... this. Updated all users.
5221         (record_goto): Renamed to ...
5222         (record_full_goto): ... this. Updated all users.
5223         (init_record_ops): Renamed to ...
5224         (init_record_full_ops): ... this. Updated all users.
5225         (record_core_resume): Renamed to ...
5226         (record_full_core_resume): ... this. Updated all users.
5227         (record_core_kill): Renamed to ...
5228         (record_full_core_kill): ... this. Updated all users.
5229         (record_core_fetch_registers): Renamed to ...
5230         (record_full_core_fetch_registers): ... this. Updated all users.
5231         (record_core_prepare_to_store): Renamed to ...
5232         (record_full_core_prepare_to_store): ... this. Updated all users.
5233         (record_core_store_registers): Renamed to ...
5234         (record_full_core_store_registers): ... this. Updated all users.
5235         (record_core_xfer_partial): Renamed to ...
5236         (record_full_core_xfer_partial): ... this. Updated all users.
5237         (record_core_insert_breakpoint): Renamed to ...
5238         (record_full_core_insert_breakpoint): ... this. Updated all users.
5239         (record_core_remove_breakpoint): Renamed to ...
5240         (record_full_core_remove_breakpoint): ... this. Updated all users.
5241         (record_core_has_execution): Renamed to ...
5242         (record_full_core_has_execution): ... this. Updated all users.
5243         (init_record_core_ops): Renamed to ...
5244         (init_record_full_core_ops): ... this. Updated all users.
5245         (cmd_record_restore): Renamed to ...
5246         (cmd_record_full_restore): ... this. Updated all users.
5247         (record_save_cleanups): Renamed to ...
5248         (record_full_save_cleanups): ... this. Updated all users.
5249         (cmd_record_start): Renamed to ...
5250         (cmd_record_full_start): ... this. Updated all users.
5251         (set_record_insn_max_num): Renamed to ...
5252         (set_record_full_insn_max_num): ... this. Updated all users.
5253         (set_record_command): Renamed to ...
5254         (set_record_full_command): ... this. Updated all users.
5255         (show_record_command): Renamed to ...
5256         (show_record_full_command): ... this. Updated all users.
5257         (_initialize_record): Renamed to ...
5258         (_initialize_record_full): ... this. Updated all users.
5259
5260 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
5261
5262         * record.h: Split into this and ...
5263         * record-full.h: ... this.
5264         * record.c: Split into this and ...
5265         * record-full.c: ... this.
5266         * target.h (target_ops): Add new fields to_info_record,
5267         to_save_record, to_delete_record, to_record_is_replaying,
5268         to_goto_record_begin, to_goto_record_end, to_goto_record.
5269         (target_info_record): New.
5270         (target_save_record): New.
5271         (target_supports_delete_record): New.
5272         (target_delete_record): New.
5273         (target_record_is_replaying): New.
5274         (target_goto_record_begin): New.
5275         (target_goto_record_end): New.
5276         (target_goto_record): New.
5277         * target.c (target_info_record): New.
5278         (target_save_record): New.
5279         (target_supports_delete_record): New.
5280         (target_delete_record): New.
5281         (target_record_is_replaying): New.
5282         (target_goto_record_begin): New.
5283         (target_goto_record_end): New.
5284         (target_goto_record): New.
5285         * record.h: Declare struct cmd_list_element.
5286         (record_cmdlist): New declaration.
5287         (set_record_cmdlist): New declaration.
5288         (show_record_cmdlist): New declaration.
5289         (info_record_cmdlist): New declaration.
5290         (cmd_record_goto): New declaration.
5291         * record.c: Remove unnecessary includes.
5292         Include inferior.h.
5293         (cmd_record_goto): Remove declaration.
5294         (record_cmdlist): Now extern. Initialize.
5295         (set_record_cmdlist): Now extern. Initialize.
5296         (show_record_cmdlist): Now extern. Initialize.
5297         (info_record_cmdlist): Now extern. Initialize.
5298         (find_record_target): New.
5299         (require_record_target): New.
5300         (cmd_record_start): Update.
5301         (cmd_record_delete): Remove target-specific code.
5302         Call target_delete_record.
5303         (cmd_record_stop): Unpush any record target.
5304         (set_record_insn_max_num): Move to record-full.c
5305         (set_record_command): Add comment.
5306         (show_record_command): Add comment.
5307         (info_record_command): Update comment.
5308         Remove target-specific code.
5309         Call the record target's to_info_record.
5310         (cmd_record_start): New.
5311         (cmd_record_goto): Now extern.
5312         Remove target-specific code.
5313         Call target_goto_begin,  target_goto_end, or target_goto.
5314         (_initialize_record): Move record target ops initialization to
5315         record-full.c.
5316         Change "record" command help text.
5317         Move "record restore", "record set", and "record show" commands to
5318         record-full.c.
5319         * Makefile.in (SFILES): Add record-full.c.
5320         (HFILES_NO_SRCDIR): Add record-full.h.
5321         (COMMON_OBS): Add record-full.o.
5322         * amd64-linux-tdep.c: Include record-full.h instead of record.h.
5323         * arm-tdep.c: Include record-full.h.
5324         * i386-linux-tdep.c: Include record-full.h instead of record.h.
5325         * i386-tdep.c: Include record-full.h.
5326         * infrun.c: Include record-full.h.
5327         * linux-record.c: Include record-full.h.
5328         * moxie-tdep.c: Include record-full.h.
5329         * record-full.c: Include record-full.h.
5330         Change module comment.
5331         (set_record_full_cmdlist): New.
5332         (show_record_full_cmdlist): New.
5333         (record_full_cmdlist): New.
5334         (record_goto_insn): New declaration.
5335         (record_save): New declaration.
5336         (record_check_insn_num): Change query string.
5337         (record_info): New.
5338         (record_delete): New.
5339         (record_is_replaying): New.
5340         (record_goto_entry): New.
5341         (record_goto_begin): New.
5342         (record_goto_end): New.
5343         (record_goto): New.
5344         (init_record_ops): Update.
5345         (init_record_core_ops): Update.
5346         (cmd_record_save): Rename to record_save. Remove target and arg checks.
5347         (cmd_record_start): New.
5348         (set_record_insn_max_num): Moved from record.c
5349         (set_record_full_command): New.
5350         (show_record_full_command): New.
5351         (_initialize_record_full): New.
5352
5353 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
5354
5355         * target.h (add_deprecated_target_alias): New.
5356         * target.c (add_deprecated_target_alias): New.
5357
5358 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
5359
5360         * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
5361         and signal.h.
5362         (linux_supports_btrace): Add kernel and
5363         cpuid check.
5364         (kernel_supports_btrace): New function.
5365         (cpu_supports_btrace): New function.
5366         (intel_supports_btrace): New function.
5367
5368 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
5369
5370         * target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
5371         * remote.c: Include btrace.h.
5372         (struct btrace_target_info): New struct.
5373         (remote_supports_btrace): New function.
5374         (send_Qbtrace): New function.
5375         (remote_enable_btrace): New function.
5376         (remote_disable_btrace): New function.
5377         (remote_teardown_btrace): New function.
5378         (remote_read_btrace): New function.
5379         (init_remote_ops): Add btrace ops.
5380         (enum <unnamed>): Add btrace packets.
5381         (struct protocol_feature remote_protocol_features[]): Add btrace packets.
5382         (_initialize_remote): Add packet configuration for branch tracing.
5383
5384 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
5385
5386         * features/btrace.dtd: New file.
5387         * Makefile.in (XMLFILES): Add btrace.dtd.
5388         * btrace.h (parse_xml_btrace): New declaration.
5389         * btrace.c: Include xml-support.h.
5390         (parse_xml_btrace): New function.
5391         (parse_xml_btrace_block): New function.
5392         (block_attributes): New struct.
5393         (btrace_attributes): New struct.
5394         (btrace_children): New struct.
5395         (btrace_elements): New struct.
5396
5397 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
5398
5399         * amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
5400         (amd64_linux_enable_btrace): New.
5401         (amd64_linux_disable_btrace): New.
5402         (amd64_linux_teardown_btrace): New.
5403         (_initialize_amd64_linux_nat): Initialize btrace ops.
5404         * i386-linux.nat.c: Include btrace.h and linux-btrace.h.
5405         (i386_linux_enable_btrace): New.
5406         (i386_linux_disable_btrace): New.
5407         (i386_linux_teardown_btrace): New.
5408         (_initialize_i386_linux_nat): Initialize btrace ops.
5409         * config/i386/linux.mh: Add linux-btrace.o.
5410         * config/i386/linux64.mh: Add linux-btrace.o.
5411
5412 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
5413
5414         * common/linux_btrace.h: New file.
5415         * common/linux_btrace.c: New file.
5416         * Makefile.in (SFILES): Add btrace.c.
5417         (HFILES_NO_SRCDIR): Add common/linux-btrace.h.
5418         (COMMON_OBS): Add btrace.o.
5419         (linux-btrace.o): New rule.
5420
5421 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
5422
5423         * target.h: Include btrace.h.
5424         (struct target_ops) <to_supports_btrace, to_enable_btrace,
5425         to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
5426         * target.c (target_supports_btrace): New function.
5427         (target_enable_btrace): New function.
5428         (target_disable_btrace): New function.
5429         (target_teardown_btrace): New function.
5430         (target_read_btrace): New function.
5431         * btrace.h: New file.
5432         * btrace.c: New file.
5433         * Makefile.in: Add btrace.c.
5434         * gdbthread.h: Include btrace.h.
5435         (struct thread_info): Add btrace field.
5436         * thread.c: Include btrace.h.
5437         (clear_thread_inferior_resources): Call target_teardown_btrace.
5438         * common/btrace-common.h: New file.
5439
5440 2013-03-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
5441
5442         * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
5443         for CHILD, ignore PTRACE_KILL errors, move the inner block variable
5444         kill_status to outer block.
5445
5446 2013-03-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
5447
5448         Fix entry-values if the callee called a noreturn function.
5449         * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
5450         get_frame_address_in_block.  Add new comment.
5451
5452 2013-03-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
5453
5454         Fix entry-values in C++ across CUs.
5455         * dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
5456         lookup_minimal_symbol.  Add a comment.
5457         * dwarf2read.c
5458         (read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
5459         DW_AT_linkage_name.
5460
5461 2013-03-08  Yao Qi  <yao@codesourcery.com>
5462
5463         * tracepoint.c (_initialize_tracepoint): Indent the code.
5464
5465 2013-03-08  Pedro Alves  <palves@redhat.com>
5466
5467         * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
5468         (parse_find_args, find_command): Change type of pattern buffer
5469         locals to 'gdb_byte *'.
5470
5471 2013-03-08  Stan Shebs  <stan@codesourcery.com>
5472             Hafiz Abid Qadeer  <abidh@codesourcery.com>
5473
5474         * NEWS: Mention set and show trace-buffer-size commands.
5475         Mention new packet.
5476         * target.h (struct target_ops): New method
5477         to_set_trace_buffer_size.
5478         (target_set_trace_buffer_size): New macro.
5479         * target.c (update_current_target): Set up new method.
5480         * tracepoint.c (trace_buffer_size): New global.
5481         (start_tracing): Send it to the target.
5482         (set_trace_buffer_size): New function.
5483         (_initialize_tracepoint): Add new setshow for trace-buffer-size.
5484         * remote.c (remote_set_trace_buffer_size): New function.
5485         (_initialize_remote): Use it.
5486         (QTBuffer:size) New remote command.
5487         (PACKET_QTBuffer_size): New enum.
5488         (remote_protocol_features): Add an entry for
5489         PACKET_QTBuffer_size.
5490
5491 2013-03-08  Tom Tromey  <tromey@redhat.com>
5492
5493         * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
5494         variable.
5495
5496 2013-03-07  Pedro Alves  <palves@redhat.com>
5497
5498         * target.c (target_read_stralloc, target_fileio_read_alloc):
5499         *Cast pointer to 'gdb_byte *' in target call.
5500
5501 2013-03-07  Pedro Alves  <palves@redhat.com>
5502
5503         * corefile.c (read_memory_string): Cast pointer to gdb_byte* in
5504         call.
5505
5506 2013-03-07  Keith Seitz  <keiths@redhat.com>
5507
5508         * breakpoint.c (catch_syscall_split_args): Use skip_spaces.
5509         (trace_pass_command): Likewise.
5510         * cli/cli-cmds.c: Include cli/cli-utils.h.
5511         (source_command): Use skip-spaces.
5512         (disassemble_command): Likewise.
5513         * findcmd.c: Include cli/cli-utils.h.
5514         (parse_find_args): Use skip_spaces.
5515         * go32-nat.c: Include cli/cli-utils.h.
5516         (go32_sldt): Use skip_spaces.
5517         (go32_sgdt): Likewise.
5518         (go32_sidt): Likewise.
5519         (go32_pde): Likewise.
5520         (go32_pte): Likewise.
5521         (go32_pte_for_address): Likewise.
5522         * infcmd.c: Include cli/cli-utils.h.
5523         (registers_info): Use skip_spaces.
5524         * linux-tdep.c (read_mapping): Use skip_spaces_const.
5525         (linux_info_proc): Likewise.
5526         * linux-thread-db.c: Include cli/cli-utils.h.
5527         (info_auto_load_libthread_db): Use skip_spaces_const.
5528         * m32r-rom.c: Include cli/cli-utils.h.
5529         (m32r_upload_command): Use skip_spaces.
5530         * maint.c: Include cli/cli-utils.h.
5531         (maintenance_translate_address): Use skip_spaces.
5532         * mi/mi-parse.c: Include cli/cli-utils.h.
5533         (mi_parse_argv): Use skip_spaces.
5534         (mi_parse): Likewise.
5535         * minsyms.c: Include cli/cli-utils.h.
5536         (msymbol_hash_iw): Use skip_spaces_const.
5537         * objc-lang.c: Include cli/cli-utils.h.
5538         (parse_selector): Use skip_spaces.
5539         (parse_method): Likewise.
5540         * python/python.c: Include cli/cli-utils.h.
5541         (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
5542         (python_command)[HAVE_PYTHON]: Likewise.
5543         (python_interactive_command)[!HAVE_PYTHON]: Likewise.
5544         * remote-m32r-sdi.c: Include cli/cli-utils.h.
5545         (m32r_load): Use skip_spaces.
5546         * serial.c: Include cli/cli-utils.h.
5547         (serial_open): Use skip_spaces_const.
5548         * stack.c: Include cli/cli-utils.h.
5549         (parse_frame_specification_1): Use skip_spaces_const.
5550         * symfile.c: Include cli/cli-utils.h.
5551         (set_ext_lang_command): Use skip_spaces.
5552         * symtab.c: Include cli/cli-utils.h.
5553         (rbreak_command): Use skip_spaces.
5554         * thread.c (thread_name_command): Use skip_spaces.
5555         * tracepoint.c (validate_actionline): Use skip_spaces.
5556         (encode_actions_1): Likewise.
5557         (trace_find_range_command): Likewise.
5558         (trace_find_outside_command): Likewise.
5559         (trace_dump_actions): Likewise.
5560
5561 2013-03-07  Pedro Alves  <palves@redhat.com>
5562
5563         * c-lang.c (parse_one_string): Cast argument to gdb_byte *.
5564         * expprint.c (print_subexp_standard): Likewise.
5565         * utils.c (host_char_to_target): Likewise.
5566         * valprint.c (generic_emit_char, generic_printstr): Likewise.
5567         * varobj.c (value_get_print_value): Change type of local to char*.
5568         Cast it gdb_byte * in call to language printer.
5569
5570 2013-03-07  Pedro Alves  <palves@redhat.com>
5571
5572         * charset.c (struct wchar_iterator) <input>: Change type to 'const
5573         gdb_byte *'.
5574         (make_wchar_iterator): Remove cast to char*.
5575         (wchar_iterate): Change type of local.
5576
5577 2013-03-07  Pedro Alves  <palves@redhat.com>
5578
5579         * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
5580         for 'regcache->register_status'.
5581
5582 2013-03-07  Pedro Alves  <palves@redhat.com>
5583
5584         * breakpoint.c (breakpoint_xfer_memory): Change type of local to
5585         int.
5586
5587 2013-03-07  Pedro Alves  <palves@redhat.com>
5588
5589         * stap-probe.c (handle_stap_probe): Add cast to char*.
5590
5591 2013-03-07  Pedro Alves  <palves@redhat.com>
5592
5593         * linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
5594         RECORD_MSGRCV>: Pass a signed variable to
5595         regcache_raw_read_signed, instead of an unsigned one.
5596
5597 2013-03-07  Pedro Alves  <palves@redhat.com>
5598
5599         * remote-notif.c (notif_debug): Change type to int.
5600         * remote-notif.h (notif_debug): Likewise.
5601
5602 2013-03-07  Pedro Alves  <palves@redhat.com>
5603
5604         * ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
5605
5606 2013-03-07  Pedro Alves  <palves@redhat.com>
5607
5608         * remote.c (hex2bin, bin2hex): Move extern declarations to ...
5609         * remote.h (hex2bin, bin2hex): ... here.
5610         * tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
5611
5612 2013-03-07  Eli Zaretskii  <eliz@gnu.org>
5613
5614         * utils.c (initialize_utils): Improve doc strings of "set/show
5615         width", "set/show height", and "set/show pagination".
5616
5617 2013-03-06  Keith Seitz  <keiths@redhat.com>
5618
5619         * ax-gdb.c (gen_printf): Make FORMAT const.
5620         * ax-gdb.h (gen_printf): Likewise.
5621         * ax-general.c (ax_string): Make STR const.
5622         * ax.h (ax_string): Likewise.
5623
5624 2013-03-06  Doug Evans  <dje@google.com>
5625
5626         * elfread.c (elf_symfile_read): Move debugging printf to more
5627         logical location.
5628
5629 2013-03-06  Pedro Alves  <palves@redhat.com>
5630
5631         * python/py-utils.c (target_string_to_unicode): Delete function.
5632         * python/python-internal.h (target_string_to_unicode): Delete
5633         declaration.
5634
5635 2013-03-06  Pierre Muller  <muller@sourceware.org>
5636
5637         * linespec.c (get_current_search_block): ARI fix, use (void)
5638         for empty parameter list.
5639
5640 2013-03-05  Doug Evans  <dje@google.com>
5641
5642         * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
5643         of old ada_lookup_symbol_list.  In !full_search case, don't
5644         search superblocks.
5645         (ada_lookup_symbol_list): Delete arg full_search, all callers
5646         updated.  Call ada_lookup_symbol_list_worker.
5647         (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
5648         * ada-lang.h (ada_lookup_symbol_list): Update.
5649         * language.h (language_defn): Update comment for
5650         la_iterate_over_symbols.
5651         * linespec.c (iterate_over_file_blocks): New function.
5652         (iterate_over_all_matching_symtabs): Call it.
5653         (lookup_prefix_sym): Ditto.
5654         (get_current_search_block): New function.
5655         (get_search_block): Delete.
5656         (find_label_symbols): Call get_current_search_block.
5657         (add_matching_symbols_to_info): Call iterate_over_file_blocks.
5658         * symtab.c (iterate_over_symbols): Don't search superblocks.
5659
5660 2013-03-05  Yao Qi  <yao@codesourcery.com>
5661
5662         * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
5663         parameter VAR's type from "unsigned int" to "int".
5664         * command.h (var_zuinteger_unlimited): Update its comments.
5665         (add_setshow_zuinteger_unlimited_cmd): Update the declaration.
5666
5667 2013-03-05  Corinna Vinschen  <vinschen@redhat.de>
5668
5669         * NEWS: Mention new target x86_64-*-cygwin*.
5670
5671 2013-03-05  Corinna Vinschen  <vinschen@redhat.de>
5672
5673         * configure.host: Add x86_64-*-cygwin* as host.
5674         * configure.tgt: Add x86_64-*-cygwin* as target.
5675         * config/i386/cygwin64.mh: New file.
5676
5677 2013-03-04  Jan Kratochvil  <jan.kratochvil@redhat.com>
5678
5679         * linespec.c (decode_line_2): Fix duplicate request off by two message.
5680
5681 2013-03-04  Jan Kratochvil  <jan.kratochvil@redhat.com>
5682
5683         * linespec.c (struct linespec_canonical_name): New.
5684         (struct linespec_state): Change canonical_names type to it.
5685         (add_sal_to_sals): Change variable canonical_name to canonical.  Change
5686         xrealloc element size.  Initialize the different CANONICAL fields.
5687         (canonical_to_fullform): New.
5688         (filter_results): Use it.  Add variables canonical, fullform and
5689         cleanup.
5690         (struct decode_line_2_item, decode_line_2_compare_items): New.
5691         (decode_line_2): Remove variables iter and item_names, add variables
5692         items and items_count.  Modify the code for these new variables.
5693
5694 2013-03-04  Corinna Vinschen  <vinschen@redhat.com>
5695
5696         * coff-pe-read.c (read_pe_exported_syms): Don't return without
5697         calling do_cleanup.
5698
5699 2013-03-04  Luis Machado  <lgustavo@codesourcery.com>
5700
5701         * tracepoint.c (build_traceframe_info): Add code for byte order.
5702
5703 2013-03-02  Kevin Buettner  <kevinb@redhat.com>
5704
5705         * v850-tdep.c: (v850e2_register_name): Revise system register
5706         names to match current V850E2M architecture specifications.
5707         Update register number enum comments too.
5708
5709 2013-03-01  Jiong Wang  <jiwang@tilera.com>
5710             Pedro Alves  <palves@redhat.com>
5711
5712         * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
5713         to END_ADDR.
5714         (tilegx_skip_prologue): Limit prologue analysis to section end.
5715
5716 2013-03-01  Jan Kratochvil  <jan.kratochvil@redhat.com>
5717
5718         * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
5719         use it.
5720
5721 2013-03-01  Pedro Alves  <palves@redhat.com>
5722
5723         Use gdb_byte for bytes from the program being debugged.
5724
5725         * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
5726         Change type of local 'buf' to gdb_byte.
5727         * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
5728         * bfin-tdep.c (bfin_push_dummy_call): Likewise.
5729         * cris-tdep.c (cris_sigcontext_addr)
5730         (cris_sigtramp_frame_unwind_cache): Likewise.
5731         * frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
5732         (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
5733         Likewise.
5734         * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
5735         * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
5736         (hppa32_hpux_search_dummy_call_sequence)
5737         (hppa_hpux_supply_save_state): Likewise.
5738         * hppa-linux-tdep.c (insns_match_pattern)
5739         (hppa_linux_find_global_pointer): Likewise.
5740         * hppa-tdep.c (hppa_in_function_epilogue_p)
5741         (skip_prologue_hard_way, hppa_frame_cache): Likewise.
5742         * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
5743         * i386fbsd-tdep.c (i386fbsd_supply_uthread)
5744         (i386fbsd_collect_uthread): Likewise.
5745         * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
5746         * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
5747         * ia64-tdep.c (examine_prologue, ia64_frame_cache)
5748         (ia64_frame_prev_register, ia64_sigtramp_frame_cache)
5749         (ia64_sigtramp_frame_prev_register, ia64_access_reg)
5750         (ia64_access_rse_reg, ia64_libunwind_frame_this_id)
5751         (ia64_libunwind_frame_prev_register)
5752         (ia64_libunwind_sigtramp_frame_this_id)
5753         (ia64_find_global_pointer_from_dynamic_section)
5754         (find_extant_func_descr, find_func_descr, ia64_dummy_id)
5755         (ia64_unwind_pc): Likewise.
5756         * iq2000-tdep.c (iq2000_store_return_value): Likewise.
5757         * m68hc11-tdep.c (m68hc11_push_dummy_call)
5758         (m68hc11_extract_return_value): Likewise.
5759         * m68klinux-nat.c (fetch_register, store_register): Likewise.
5760         * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
5761         (mep_get_insn, mep_push_dummy_call): Likewise.
5762         * mips-linux-tdep.c (mips_linux_get_longjmp_target)
5763         (mips_linux_in_dynsym_stub): Likewise.
5764         * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
5765         * ppc-linux-nat.c (fetch_register, store_register): Likewise.
5766         * regcache.c (dump_endian_bytes): Change type of parameter 'buf'
5767         to gdb_byte.
5768         * remote-mips.c (mips_set_register): Likewise.
5769         * remote-sim.c (gdbsim_fetch_register): Likewise.
5770         * score-tdep.c (score7_fetch_inst): Change type of parameter
5771         'memblock' and local 'buf' to gdb_byte.
5772         (score7_malloc_and_get_memblock): Change return type to gdb_byte.
5773         Change type of local 'buf' to gdb_byte.  Adjust.
5774         (score7_adjust_memblock_ptr): Change type of parameter 'memblock'
5775         to gdb_byte**.
5776         (score7_analyze_prologue): Change type of 'memblock' and
5777         'memblock_ptr' locals to gdb_byte*.
5778         * sh64-tdep.c (sh64_extract_return_value)
5779         (sh64_store_return_value): Change type of local 'buf' to gdb_byte.
5780         * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
5781         * solib-pa64.c (pa64_solib_create_inferior_hook)
5782         (pa64_open_symbol_file_object): Remove local 'buf'.
5783         * solib-som.c (som_solib_create_inferior_hook, link_map_start)
5784         (som_open_symbol_file_object): Likewise.
5785         * solib-spu.c (spu_current_sos): Likewise.
5786         * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
5787         * spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
5788         (spu_store_registers): Likewise.
5789         * target.c (debug_print_register): Likewise.
5790         * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
5791         * xstormy16-tdep.c (xstormy16_store_return_value)
5792         (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
5793         (xstormy16_find_jmp_table_entry): Likewise.
5794
5795 2013-03-01  Jiong Wang  <jiwang@tilera.com>
5796
5797         * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
5798         (tilegx_gdbarch_init): Install it.
5799
5800 2013-02-28  Tom Tromey  <tromey@redhat.com>
5801
5802         * python/py-arch.c (archpy_disassemble): Use PyInt_Check and
5803         PyLong_Check.
5804
5805 2013-02-28  Doug Evans  <dje@google.com>
5806
5807         * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
5808         * python/python.c (gdbpy_find_pc_line): Ditto.
5809
5810 2013-02-28  Tom Tromey  <tromey@redhat.com>
5811
5812         * contrib/excheck.py: New file.
5813         * contrib/exsummary.py: New file.
5814         * contrib/gcc-with-excheck: New file.
5815
5816 2013-02-28  Tom Tromey  <tromey@redhat.com>
5817
5818         * python/python.c (gdbpy_print_stack): Call begin_line and
5819         fprintf_filtered inside TRY_CATCH.
5820
5821 2013-02-28  Tom Tromey  <tromey@redhat.com>
5822
5823         * python/python.c (gdbpy_find_pc_line): Call find_pc_line
5824         inside TRY_CATCH.
5825
5826 2013-02-28  Tom Tromey  <tromey@redhat.com>
5827
5828         * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
5829         frame_object_to_frame_info inside TRY_CATCH.
5830
5831 2013-02-28  Tom Tromey  <tromey@redhat.com>
5832
5833         * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
5834         TRY_CATCH.
5835
5836 2013-02-28  Tom Tromey  <tromey@redhat.com>
5837
5838         * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.
5839
5840 2013-02-27  Corinna Vinschen  <vinschen@redhat.com>
5841
5842         * windows-nat.c: Throughout, fix format strings and casts of
5843         printf-like functions to avoid type related warnings on all
5844         platforms.
5845         (handle_output_debug_string): Fetch context information address
5846         from debug string using string_to_core_addr.
5847
5848 2013-02-27  Jiong Wang  <jiwang@tilera.com>
5849
5850         * regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
5851         * regformats/reg-tilegx32.dat: New.
5852
5853 2013-02-27  Jiong Wang  <jiwang@tilera.com>
5854
5855         * configure.tgt (tilegx-*-linux*): Enable gdbserver.
5856
5857 2013-02-27  Jiong Wang  <jiwang@tilera.com>
5858
5859         * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
5860
5861 2013-02-27  Yao Qi  <yao@codesourcery.com>
5862             Pedro Alves  <palves@redhat.com>
5863
5864         * tracepoint.c (tfile_trace_find): For tfind
5865         pc/tp/range/outside, look for the next trace frame instead of
5866         always starting from frame 0.
5867
5868 2013-02-26  Anthony Green  <green@moxielogic.com>
5869
5870         * configure.tgt: Add support for moxie-*-rtems* target.
5871
5872 2013-02-25  Pedro Alves  <palves@redhat.com>
5873
5874         * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
5875         warning text.
5876
5877 2013-02-24  Maciej W. Rozycki  <macro@codesourcery.com>
5878
5879         * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
5880         if $fp is used as the virtual frame pointer.
5881
5882 2013-02-23  Alan Modra  <amodra@gmail.com>
5883
5884         * elfread.c (elf_symtab_read): Do not use udata.p here to find
5885         symbol size.
5886         * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
5887         * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
5888         * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
5889         * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
5890
5891 2013-02-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
5892
5893         Code cleanup.
5894         * elfread.c (build_id_bfd_get): Make the return type const.
5895         (build_id_verify): Make the check parameter const.
5896         (build_id_to_debug_filename): Make the build_id parameter and variable
5897         data const.
5898         (find_separate_debug_file_by_buildid): Make the variable build_id const.
5899
5900 2013-02-21  Alan Modra  <amodra@gmail.com>
5901
5902         * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
5903
5904 2013-02-20  Siva Chandra Reddy  <sivachandra@google.com>
5905
5906         Add a new method 'disassemble' to gdb.Architecture class.
5907         * python/py-arch.c (archpy_disassmble): Implementation of the
5908         new method gdb.Architecture.disassemble.
5909         (arch_object_methods): Add entry for the new method.
5910
5911 2013-02-20  Jiong Wang  <jiwang@tilera.com>
5912
5913         * MAINTAINERS (Write After Approval): Add myself to the list.
5914
5915 2013-02-19  Pedro Alves  <palves@redhat.com>
5916
5917         Garbage collect 'struct monitor_ops'::load_routine.
5918
5919         * monitor.h (struct monitor_ops) <load_routine>: Remove field.
5920         * monitor.c (monitor_load): No longer call
5921         current_monitor->load_routine.
5922         * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
5923         * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
5924         * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
5925
5926 2013-02-19  Pedro Alves  <palves@redhat.com>
5927
5928         PR gdb/15161
5929
5930         Harmonize with generic_load.
5931
5932         * monitor.c: Include "readline/readline.h".
5933         (monitor_load): Rename parameter 'file' to 'args'.  Use build_argv
5934         instead of sscanf.  Use CORE_ADDR/strtoulst instead of unsigned
5935         long/strtol for the 'load_offset' local.  Error out if no argument
5936         is given or if too many arguments are given.  Tilde expand the
5937         passed in file name.
5938
5939 2013-02-19  Kai Tietz  <ktietz@redhat.com>
5940
5941         PR gdb/15161
5942         * symfile.c (load_section_data): Change type of load_offset
5943         to CORE_ADDR.
5944         (generic_load): User strtoulst instead of strtoul for conversion
5945         of load_offset.
5946
5947 2013-02-19  Jiong Wang  <jiwang@tilera.com>
5948
5949         * tilegx-tdep.c (tilegx_analyze_prologue): add check for
5950          for return address, "lr" register, saved on stack.
5951         * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
5952         after we invoke tilegx_analyze_prologue.
5953
5954 2013-02-19  Jiong Wang  <jiwang@tilera.com>
5955
5956         * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
5957
5958 2013-02-19  Jiong Wang  <jiwang@tilera.com>
5959
5960         * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
5961
5962 2013-02-19  Jiong Wang  <jiwang@tilera.com>
5963
5964         * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
5965         (tilegx_write_pc): New function.
5966         (tilegx_cannot_reference_register): Return zero if REGNO
5967         is TILEGX_FAULTNUM_REGNUM.
5968         (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
5969         (tilegx_register_name): Add handling of "faultnum" register.
5970         * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
5971         * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
5972         handling of TILEGX_FAULTNUM_REGNUM.
5973         * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
5974
5975 2013-02-19  Jiong Wang  <jiwang@tilera.com>
5976
5977         * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
5978         should be aligned to 64bit.
5979
5980 2013-02-19  Kai Tietz  <ktietz@redhat.com>
5981
5982         * windows-nat.c (windows_xfer_memory): Fix debug-output
5983         for LLP64.
5984
5985 2013-02-19  Lei Liu  <lei.liu2@windriver.com>
5986
5987         * mips-linux-nat.c (mips64_linux_regsets_store_registers):
5988         Don't check DSP register number if HAVE_DSP is not set.
5989
5990 2013-02-19  Alan Modra  <amodra@gmail.com>
5991
5992         * elfread.c (struct build_id): Delete.  Use struct elf_build_id
5993         throughout file instead.
5994         (build_id_bfd_get): Update to use new elf_tdata build_id field.
5995         Don't xmalloc return value.
5996         (build_id_verify): Similarly.  Don't xfree.
5997         (build_id_to_debug_filename): Update.
5998         (find_separate_debug_file_by_buildid): Update, don't xfree.
5999
6000 2013-02-18  Tom Tromey  <tromey@redhat.com>
6001
6002         PR gdb/15102:
6003         * dwarf2read.c (read_subrange_type): Use result of
6004         'check_typedef'.
6005
6006 2013-02-16  Yuanhui Zhang  <asmwarrior@gmail.com>
6007
6008         * frame.c: Remove one extra white space after #include
6009         directive.
6010
6011 2013-02-15  Jan Kratochvil  <jan.kratochvil@redhat.com>
6012
6013         * contrib/cc-with-tweaks.sh: Extend the comment for -p option.
6014
6015 2013-02-15  Jan Kratochvil  <jan.kratochvil@redhat.com>
6016
6017         * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
6018         and dir commands into an if block.
6019
6020 2013-02-15  Sanimir Agovic  <sanimir.agovic@intel.com>
6021
6022         * python/py-breakpoint (struct pybp_code):  Use int instead of
6023         enum type_code.
6024
6025 2013-02-15  Pedro Alves  <pedro@codesourcery.com>
6026             Hafiz Abid Qadeer  <abidh@codesourcery.com>
6027
6028         * NEWS: Mention new field "trace-file".
6029         * tracepoint.c (trace_status_mi): Output "trace-file" field.
6030         (tfile_open): Record the trace file's filename in the trace
6031         status.
6032         (tfile_files_info): Mention the name of the trace file.
6033         Check the "filename" field explicitely.
6034         (trace_status_command): Explicitely check "filename" field.
6035         (trace_find_command): Ditto.
6036         (trace_find_pc_command): Ditto.
6037         (trace_find_tracepoint_command): Ditto.
6038         (trace_find_line_command): Ditto.
6039         (trace_find_range_command): Ditto.
6040         (trace_find_outside_command): Ditto.
6041         * tracepoint.h (struct trace_status) <from_file>: Rename it
6042         to "filename" and make it hold the trace file's filename
6043         instead of a boolean.
6044         * remote.c (remote_get_trace_status): Initialize "filename"
6045         field with NULL instead of 0.
6046
6047 2013-02-15  Yao Qi  <yao@codesourcery.com>
6048
6049         * remote.c: Fix a typo.
6050
6051 2013-02-14  Pierre Muller  <muller@sourceware.org>
6052
6053         * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove.
6054
6055 2013-02-14  Pedro Alves  <palves@redhat.com>
6056
6057         * utils.c (savestring): Don't #undef it.  Move function to
6058         common/common-utils.c.
6059         * common/common-utils.c: Include gdb_string.h.
6060         (savestring): Move here from utils.c.
6061         * common/common-utils.h (savestring): Declare.
6062
6063 2013-02-14  Pedro Alves  <palves@redhat.com>
6064
6065         * utils.c (savestring): Rename parameter 'size' to 'len'.
6066
6067 2013-02-14  Pedro Alves  <palves@redhat.com>
6068             Yufeng Zhang  <yufeng.zhang@arm.com>
6069
6070         * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete.
6071         (aarch64_inferior_data, struct aarch64_inferior_data):
6072         Delete.
6073         (struct aarch64_process_info): New.
6074         (aarch64_process_list): New global.
6075         (aarch64_find_process_pid, aarch64_add_process)
6076         (aarch64_process_info_get): New functions.
6077         (aarch64_inferior_data_get): Delete.
6078         (aarch64_process_info_get): New function.
6079         (aarch64_forget_process): New function.
6080         (aarch64_get_debug_reg_state): New parameter 'pid'.  Reimplement.
6081         (aarch64_linux_prepare_to_resume): Pass the lwp's pid to
6082         aarch64_get_debug_reg_state.
6083         (aarch64_notify_debug_reg_change): Use iterate_over_lwps
6084         instead of linux_nat_iterate_watchpoint_lwps.
6085         (aarch64_linux_new_fork): New function.
6086         (aarch64_linux_child_post_startup_inferior): Use
6087         aarch64_forget_process instead of aarch64_init_debug_reg_state.
6088         (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint)
6089         (aarch64_linux_remove_hw_breakpoint)
6090         (aarch64_handle_aligned_watchpoint)
6091         (aarch64_handle_unaligned_watchpoint)
6092         (aarch64_linux_insert_watchpoint)
6093         (aarch64_linux_remove_watchpoint)
6094         (aarch64_linux_stopped_data_address): Adjust to pass the current
6095         process id to aarch64_debug_reg_state.
6096         (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as
6097         linux_nat_new_fork hook, and aarch64_forget_process as
6098         linux_nat_forget_process hook; remove the call to
6099         register_inferior_data_with_cleanup.
6100
6101 2013-02-14  Pedro Alves  <palves@redhat.com>
6102
6103         * eval.c (evaluate_subexp_for_address) <default_case_after_eval,
6104         EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
6105         lval_memory.
6106
6107 2013-02-14  Pedro Alves  <pedro@codesourcery.com>
6108             Hafiz Abid Qadeer  <abidh@codesourcery.com>
6109
6110         * tracepoint.h (validate_trace_state_variable_name): Declare.
6111         * tracepoint.c (validate_trace_state_variable_name): New.
6112         (trace_variable_command): Parse the trace state variable's name
6113         without using parse_expression.  Do several validations.
6114         * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
6115         trace state variable's name with parse_expression.  Validate it.
6116
6117 2013-02-14  Yao Qi  <yao@codesourcery.com>
6118
6119         * infcmd.c (breakpoint_proceeded): Remove it.
6120
6121 2013-02-14  Yao Qi  <yao@codesourcery.com>
6122
6123         * tracepoint.c (end_actions_pseudocommand): Make it static.
6124         (while_stepping_pseudocommand): Likewise.
6125         * tracepoint.h (end_actions_pseudocommand): Remove the
6126         declaration.
6127         (while_stepping_pseudocommand): Likewise.
6128
6129 2013-02-14  Yao Qi  <yao@codesourcery.com>
6130
6131         * cli/cli-decode.c (help_cmd): Remove the declaration of
6132         "cmdlist".
6133         (help_all): Likewise.
6134
6135 2013-02-13  Pedro Alves  <palves@redhat.com>
6136
6137         * amd64-linux-nat.c (update_debug_registers_callback):
6138         Update comment.
6139         (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
6140         iterate_over_lwps.
6141         (amd64_linux_prepare_to_resume): Pass the lwp's pid to
6142         i386_debug_reg_state.
6143         (amd64_linux_new_fork): New function.
6144         (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
6145         linux_nat_new_fork hook, and i386_forget_process as
6146         linux_nat_forget_process hook.
6147         * i386-linux-nat.c (update_debug_registers_callback):
6148         Update comment.
6149         (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
6150         iterate_over_lwps.
6151         (i386_linux_prepare_to_resume): Pass the lwp's pid to
6152         i386_debug_reg_state.
6153         (i386_linux_new_fork): New function.
6154         (_initialize_i386_linux_nat): Install i386_linux_new_fork as
6155         linux_nat_new_fork hook, and i386_forget_process as
6156         linux_nat_forget_process hook.
6157         * i386-nat.c (i386_init_dregs): Delete.
6158         (i386_inferior_data, struct i386_inferior_data):
6159         Delete.
6160         (struct i386_process_info): New.
6161         (i386_process_list): New global.
6162         (i386_find_process_pid, i386_add_process, i386_process_info_get):
6163         New functions.
6164         (i386_inferior_data_get): Delete.
6165         (i386_process_info_get): New function.
6166         (i386_debug_reg_state): New parameter 'pid'.  Reimplement.
6167         (i386_forget_process): New function.
6168         (i386_cleanup_dregs): Rewrite.
6169         (i386_update_inferior_debug_regs, i386_insert_watchpoint)
6170         (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
6171         (i386_stopped_data_address, i386_insert_hw_breakpoint)
6172         (i386_remove_hw_breakpoint): Adjust to pass the current process id
6173         to i386_debug_reg_state.
6174         (i386_use_watchpoints): Don't register inferior data.
6175         * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
6176         adjust comment.
6177         (i386_forget_process): Declare.
6178         * linux-fork.c (delete_fork): Call linux_nat_forget_process.
6179         * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
6180         New static globals.
6181         (linux_child_follow_fork): Don't call linux_nat_new_thread here.
6182         (add_initial_lwp): New, factored out from ...
6183         (add_lwp): ... this.  Don't check the number of lwps before
6184         calling linux_nat_new_thread.
6185         (linux_nat_iterate_watchpoint_lwps): Delete.
6186         (linux_nat_attach): Use add_initial_lwp instead of add_lwp.
6187         (linux_handle_extended_wait): Call the linux_nat_new_fork hook on
6188         forks and vforks.
6189         (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
6190         initial lwp.
6191         (linux_nat_kill, linux_nat_mourn_inferior): Call
6192         linux_nat_forget_process.
6193         (linux_nat_set_new_fork, linux_nat_set_forget_process)
6194         (linux_nat_forget_process): New functions.
6195         * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
6196         type.
6197         (linux_nat_iterate_watchpoint_lwps): Delete declaration.
6198         (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
6199         types.
6200         (linux_nat_set_new_fork, linux_nat_set_forget_process)
6201         (linux_nat_forget_process): New declarations.
6202
6203         * amd64fbsd-nat.c (super_mourn_inferior): New global.
6204         (amd64fbsd_mourn_inferior): New function.
6205         (_initialize_amd64fbsd_nat): Override to_mourn_inferior.
6206         * windows-nat.c (windows_detach): Call i386_cleanup_dregs.
6207
6208 2013-02-13  Marcus Shawcroft  <marcus.shawcroft@arm.com>
6209
6210         * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
6211         Adding _().
6212
6213 2013-02-13  Marcus Shawcroft  <marcus.shawcroft@arm.com>
6214
6215         * aarch64-linux-nat.c (debug_reg_change_callback)
6216         (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with
6217         %s and phex().
6218
6219 2013-02-13  Marcus Shawcroft  <marcus.shawcroft@arm.com>
6220
6221         * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long
6222         with LONGEST.
6223
6224 2013-02-13  Pedro Alves  <palves@redhat.com>
6225             Hafiz Abid Qadeer  <abidh@codesourcery.com>
6226
6227         * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS.
6228
6229 2013-02-12  Tom Tromey  <tromey@redhat.com>
6230
6231         PR symtab/11464:
6232         * c-exp.y (lex_one_token): Initialize other fields of yylval on
6233         NAME return.
6234         (classify_inner_name): Remove 'first_name' argument, add
6235         'context'.  Remove unused variable.
6236         (yylex): Explicitly maintain the context type.  Exit loop earlier
6237         if NAME result is seen.
6238
6239 2013-02-12  Pedro Alves  <palves@redhat.com>
6240
6241         * amd64-darwin-tdep.c: Add (C) after Copyright.
6242         * cli/cli-cmds.h: Ditto.
6243         * cli/cli-decode.c: Ditto.
6244         * cli/cli-decode.h: Ditto.
6245         * cli/cli-dump.c: Ditto.
6246         * cli/cli-dump.h: Ditto.
6247         * cli/cli-interp.c: Ditto.
6248         * cli/cli-logging.c: Ditto.
6249         * cli/cli-script.c: Ditto.
6250         * cli/cli-script.h: Ditto.
6251         * cli/cli-setshow.c: Ditto.
6252         * cli/cli-setshow.h: Ditto.
6253         * cli/cli-utils.c: Ditto.
6254         * cli/cli-utils.h: Ditto.
6255         * config/alpha/nm-osf3.h: Ditto.
6256         * config/djgpp/djconfig.sh: Ditto.
6257         * config/i386/nm-fbsd.h: Ditto.
6258         * config/i386/nm-i386gnu.h: Ditto.
6259         * config/nm-linux.h: Ditto.
6260         * config/nm-nto.h: Ditto.
6261         * config/rs6000/nm-rs6000.h: Ditto.
6262         * config/sparc/nm-sol2.h: Ditto.
6263         * darwin-nat-info.c: Ditto.
6264         * dfp.c: Ditto.
6265         * dfp.h: Ditto.
6266         * gdb-demangle.h: Ditto.
6267         * i386-darwin-nat.c: Ditto.
6268         * i386-darwin-tdep.c: Ditto.
6269         * linux-fork.h: Ditto.
6270         * m32c-tdep.c: Ditto.
6271         * microblaze-linux-tdep.c: Ditto.
6272         * microblaze-rom.c: Ditto.
6273         * microblaze-tdep.c: Ditto.
6274         * microblaze-tdep.h: Ditto.
6275         * mips-linux-tdep.h: Ditto.
6276         * ppc-ravenscar-thread.c: Ditto.
6277         * ppc-ravenscar-thread.h: Ditto.
6278         * prologue-value.c: Ditto.
6279         * prologue-value.h: Ditto.
6280         * ravenscar-thread.c: Ditto.
6281         * ravenscar-thread.h: Ditto.
6282         * sparc-ravenscar-thread.c: Ditto.
6283         * sparc-ravenscar-thread.h: Ditto.
6284         * tilegx-linux-tdep.c: Ditto.
6285         * unwind_stop_reasons.def: Ditto.
6286         * windows-nat.h: Ditto.
6287         * xtensa-linux-tdep.c: Ditto.
6288         * xtensa-xtregs.c: Ditto.
6289         * regformats/regdat.sh: Ditto.
6290         * regformats/regdef.h: Ditto.
6291
6292 2013-02-12  Pedro Alves  <palves@redhat.com>
6293
6294         * break-catch-sig.c: Update copyright years.
6295
6296 2013-02-11  Siva Chandra Reddy  <sivachandra@google.com>
6297
6298         Add support for a destructor for ui_out data and use it to
6299         provide a ui_out destructor.
6300         * ui-out.h: Declare the new ui_out destructor.
6301         (ui_out_impl): Add a field for data destructor in ui_out_impl.
6302         * ui-out.c (default_data_destroy): Add a default data destructor
6303         which does nothing.
6304         (default_ui_out_impl): Set the new data_destroy field to
6305         default_data_destroy
6306         (uo_data_destroy): Local function which invokes the data
6307         destructor if present.
6308         (clear_table): Local function which clears the table data of a
6309         ui_out object.
6310         (ui_out_destroy): Public function which frees a ui_out object.
6311         (ui_out_table_end): Use the new clear_table function.
6312         * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to
6313         NULL.
6314         * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field
6315         to NULL.
6316
6317 2013-02-11  Doug Evans  <dje@google.com>
6318
6319         * printcmd.c (printf_c_string,printf_wide_c_string): New functions.
6320         (printf_decfloat): New function.  Broken out from ui_printf.
6321         Remove unnecessary code to shift the entire format string down.
6322         (printf_pointer): New function.
6323         (ui_printf): Code to print C strings, wide C strings, decfloats,
6324         and pointers moved to separate functions.
6325
6326 2013-02-11  Sergio Durigan Junior  <sergiodj@redhat.com>
6327
6328         * valops.c (value_assign): Handling bitfield offset in
6329         `lval_internalvar_component' case.
6330
6331 2013-02-08  Doug Evans  <dje@google.com>
6332
6333         * common/format.c (parse_format_string): Fix whitespace.
6334
6335 2013-02-08  Matthew Gretton-Dann  <matthew.gretton-dann@linaro.org>
6336
6337         * stack.c (return_command): Work around uninitialized variable
6338         warning.
6339
6340 2013-02-08  Yufeng Zhang  <yufeng.zhang@arm.com>
6341
6342         * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
6343         number of the registers from 36 to 34.
6344
6345 2013-02-08  Marcus Shawcroft  <marcus.shawcroft@arm.com>
6346
6347         * NEWS: Mention new AArch64 native and target support.
6348
6349 2013-02-08  Marcus Shawcroft  <marcus.shawcroft@arm.com>
6350
6351         * MAINTAINERS (Write After Approval): Add myself.
6352
6353 2013-02-08  Jim MacArthur  <jim.macarthur@arm.com>
6354             Marcus Shawcroft  <marcus.shawcroft@arm.com>
6355             Nigel Stephens  <nigel.stephens@arm.com>
6356             Yufeng Zhang  <yufeng.zhang@arm.com>
6357
6358         * aarch64-linux-nat.c: New file.
6359         * config/aarch64/linux.mh: New file.
6360         * configure.host: Add AArch64.
6361         * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.
6362
6363 2013-02-07  Doug Evans  <dje@google.com>
6364
6365         * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
6366         disassemble command.
6367
6368 2013-02-07  Marcus Shawcroft  <marcus.shawcroft@arm.com>
6369
6370         * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
6371         set_gdbarch_fetch_tls_load_module_address.
6372
6373 2013-02-06  David S. Miller  <davem@davemloft.net>
6374
6375         * sparc-tdep.c (sparc32_return_value): Handle writing return value when
6376         using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
6377         * value.c (struct_return_convention): New function.
6378         (using_struct_return): Implement in terms of struct_return_convention.
6379         * value.h (struct_return_convention): Declare.
6380         * stack.c (return_command): Allow successful overriding of the return
6381         value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.
6382
6383 2013-02-06  Tom Tromey  <tromey@redhat.com>
6384
6385         * python/py-type.c (typy_strip_typedefs): Don't call check_typedef
6386         outside of TRY_CATCH.
6387
6388 2013-02-06  Yao Qi  <yao@codesourcery.com>
6389
6390         * mi/mi-interp.c: Include "tracepoint.h".
6391         (mi_tsv_modified): Declare.
6392         (mi_tsv_created, mi_tsv_deleted): Update declaration.
6393         (mi_interpreter_init): Call observer_attach_tsv_modified.
6394         (mi_tsv_modified): New.
6395         (mi_tsv_created, mi_tsv_deleted): Update.
6396         * tracepoint.c (trace_variable_command): Call
6397         observer_notify_tsv_modified if the initial value of tsv is
6398         changed.
6399         (delete_trace_state_variable): Call
6400         observer_notify_tsv_deleted earlier.
6401         (trace_variable_command): Caller update.
6402         (create_tsv_from_upload): Likewise.
6403         * observer.sh: Declare "struct trace_state_variable".
6404
6405         * NEWS: Mention the new MI notification "=tsv-modified".
6406
6407 2013-02-05  Doug Evans  <dje@google.com>
6408
6409         * completer.c (location_completer): Fix typo in comment.
6410
6411 2013-02-05  Jan Kratochvil  <jan.kratochvil@redhat.com>
6412
6413         * breakpoint.c (add_location_to_breakpoint): Insert the location with
6414         ADDRESS sorted.
6415
6416 2013-02-05  Marcus Shawcroft  <marcus.shawcroft@arm.com>
6417
6418         * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
6419         Refactor if statement to avoid trailing || operator.
6420
6421 2013-02-05  Andreas Tobler  <andreast@fgznet.ch>
6422
6423         * NEWS: Add PowerPC FreeBSD as a new native configuration.
6424
6425 2013-02-04  Andreas Tobler  <andreast@fgznet.ch>
6426
6427         * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
6428         * configure.host: Add powerpc*-*-freebsd* target.
6429         * configure.tgt: Add target info for powerpc*-*-freebsd*.
6430         * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
6431         * config/powerpc/fbsd.mh: New file.
6432
6433 2013-02-04  Sergio Durigan Junior  <sergiodj@redhat.com>
6434             Denys Vlasenko  <dvlasenk@redhat.com>
6435             Pedro Alves  <palves@redhat.com>
6436
6437         * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
6438         (struct elf_internal_linux_prpsinfo): Forward declare.
6439         * gdbarch.h, gdbarch.c: Regenerate.
6440         * linux-tdep.c: Include `cli/cli-utils.h'.
6441         (linux_fill_prpsinfo): New function.
6442         (linux_make_corefile_notes): Use linux_fill_prpsinfo.  If there's
6443         an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
6444         elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
6445         depending on gdbarch pointer bitness.
6446         * ppc-linux-tdep.c: Include elf-bfd.h.
6447         (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
6448         on 32-bit.
6449
6450 2013-02-04  Jim MacArthur  <jim.macarthur@arm.com>
6451             Marcus Shawcroft  <marcus.shawcroft@arm.com>
6452             Nigel Stephens  <nigel.stephens@arm.com>
6453             Yufeng Zhang  <yufeng.zhang@arm.com>
6454
6455         * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.
6456
6457 2013-02-04  Jim MacArthur  <jim.macarthur@arm.com>
6458             Marcus Shawcroft  <marcus.shawcroft@arm.com>
6459             Nigel Stephens  <nigel.stephens@arm.com>
6460             Yufeng Zhang  <yufeng.zhang@arm.com>
6461
6462         * aarch64-newlib-tdep.c: New file.
6463         * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
6464         aarch64*-*-elf.
6465         * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
6466         * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
6467         (ALLDEPFILES): Add aarch64-newlib-tdep.c.
6468         * osabi.c (gdb_osabi_names): Add "Newlib".
6469
6470 2013-02-04  Jim MacArthur  <jim.macarthur@arm.com>
6471             Marcus Shawcroft  <marcus.shawcroft@arm.com>
6472             Nigel Stephens  <nigel.stephens@arm.com>
6473             Yufeng Zhang  <yufeng.zhang@arm.com>
6474
6475         * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
6476         (ALLDEPFILES): Add aarch64-linux-tdep.c.
6477         * aarch64-linux-tdep.c: New file.
6478         * aarch64-linux-tdep.h: New file.
6479         * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
6480         * configure.tgt: Add aarch64-none-linux-gnu.
6481
6482 2013-02-04  Jim MacArthur  <jim.macarthur@arm.com>
6483             Marcus Shawcroft  <marcus.shawcroft@arm.com>
6484             Nigel Stephens  <nigel.stephens@arm.com>
6485             Yufeng Zhang  <yufeng.zhang@arm.com>
6486
6487         * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
6488         (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
6489         (ALLDEPFILES): Add aarch64-tdep.c.
6490         * aarch64-tdep.c: New file.
6491         * aarch64-tdep.h: New file.
6492         * configure.tgt: Add AArch64.
6493         * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
6494         (aarch64-expedite): New definition.
6495         * features/aarch64-core.xml: New file.
6496         * features/aarch64-fpu.xml: New file.
6497         * features/aarch64-without-fpu.c: New file (generated).
6498         * features/aarch64-without-fpu.xml: New file.
6499         * features/aarch64.c: New file (generated).
6500         * features/aarch64.xml: New file.
6501         * regformats/aarch64-without-fpu.dat: New file (generated).
6502         * regformats/aarch64.dat: New file (generated).
6503
6504 2013-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
6505
6506         * contrib/expect-read1.c: New file.
6507         * contrib/expect-read1.sh: New file.
6508
6509 2013-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
6510
6511         * dwarf2read.c (file_file_name): New function with code from
6512         file_full_name.
6513         (file_full_name): Move most of the code to file_file_name.
6514         (macro_start_file): Rename variable full_name to file_name and use
6515         file_file_name for it.  Add comp_dir parameter to new_macro_table.
6516         * macrocmd.c (show_pp_source_pos): New variable fullname.  Replace any
6517         macro_source_file->filename access by macro_source_fullname call.
6518         * macroscope.c (_initialize_macroscope): Update the new_macro_table
6519         caller.
6520         * macrotab.c (struct macro_table): New field comp_dir.
6521         (macro_include): New variables link_fullname and source_fullname.
6522         Replace any macro_source_file->filename access by macro_source_fullname
6523         call.
6524         (macro_lookup_inclusion): Remove the partial filenames checking code.
6525         (check_for_redefinition): New variables source_fullname and
6526         found_key_fullname.  Replace any macro_source_file->filename access by
6527         macro_source_fullname call.
6528         (macro_undef): New variables source_fullname and key_fullname.  Replace
6529         any macro_source_file->filename access by macro_source_fullname call.
6530         (macro_lookup_definition): New variables retval and source_fullname.
6531         Replace any macro_source_file->filename access by macro_source_fullname
6532         call.
6533         (foreach_macro): New variable key_fullname.  Replace any
6534         macro_source_file->filename access by macro_source_fullname call.
6535         (foreach_macro_in_scope): New variable datum_fullname.  Replace any
6536         macro_source_file->filename access by macro_source_fullname call.
6537         (new_macro_table): Add parameter comp_dir.  Initialize T with it.
6538         (macro_source_fullname): New function.
6539         * macrotab.h (struct macro_source_file): Extent the filename field
6540         comment.
6541         (new_macro_table): New parameter comp_dir, add a comment for it.
6542         (macro_source_fullname): new declaration.
6543
6544 2013-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
6545
6546         * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
6547         this_real_name to outer block.  Use it also for
6548         compare_filenames_for_search.
6549         (dw2_expand_symtabs_matching): New variable this_real_name.  Use it
6550         with dw2_get_real_path for file_matcher, considering also
6551         BASENAMES_MAY_DIFFER.
6552         (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.
6553
6554 2013-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
6555
6556         * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
6557         to the file_matcher parameter.  Pass 0 to it.
6558         (dwarf2_create_include_psymtab): Copy also DIRNAME.
6559         * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
6560         NULL psymtab_to_fullname result.
6561         (psymtab_to_fullname): Remove variable r.  Never return NULL, assemble
6562         an expected filename instead.
6563         (expand_symtabs_matching_via_partial): Add basenames parameter to the
6564         file_matcher parameter.  Call also psymtab_to_fullname, after newly
6565         considering BASENAMES_MAY_DIFFER.
6566         * source.c (rewrite_source_path): Remove static.
6567         * source.h (rewrite_source_path): New declaration.
6568         * symfile.h (struct quick_symbol_functions): Add basenames parameter to
6569         the expand_symtabs_matching field.  Comment it.
6570         * symtab.c (file_matches): New function comment.  Add parameter
6571         basenames, implement it.
6572         (search_symbols_file_matches): Add basenames parameter.  Update the
6573         file_matches caller.
6574         (search_symbols): Match FILES also against symtab_to_fullname.
6575         Optimize it for BASENAMES_MAY_DIFFER.
6576
6577 2013-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
6578
6579         * source.c (print_source_lines_base): Print for TUI also "fullname".
6580         * tui/tui-data.c (init_content_element): Change tui_locator_element
6581         field to full_name.
6582         * tui/tui-data.h (struct tui_locator_element): Likewise.
6583         * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
6584         tui_update_locator_filename calls to tui_update_locator_fullname.
6585         Replace symtab->filename refererence by symtab_to_fullname call.
6586         * tui/tui-out.c (tui_field_string): Check for "fullname" now.
6587         * tui/tui-source.c (tui_set_source_content): Change tui_locator_element
6588         field to full_name.  Replace symtab->filename refererence by
6589         symtab_to_fullname call.
6590         (tui_show_symtab_source): Rename parameter to fullname.  Change
6591         tui_locator_element field to full_name.
6592         * tui/tui-stack.c: Include source.h.
6593         (tui_set_locator_filename): Rename the declaration to ...
6594         (tui_set_locator_fullname): ... here.  Rename its parameter to
6595         fullname, updates its comment.
6596         (tui_set_locator_info): Rename its parameter to fullname.
6597         (tui_set_locator_filename): Rename the definition to ...
6598         (tui_set_locator_fullname): ... here.  Rename its parameter to
6599         fullname, updates its comment.  Change tui_locator_element field to
6600         full_name.
6601         (tui_set_locator_info): Rename its parameter to fullname.
6602         (tui_set_locator_info): Rename callee to tui_set_locator_fullname.
6603         (tui_update_locator_filename): Rename to ...
6604         (tui_update_locator_fullname): ... here. Rename callee to
6605         tui_set_locator_fullname.
6606         (tui_show_frame_info): Replace symtab->filename refererence by
6607         symtab_to_fullname call.
6608         * tui/tui-stack.h (tui_update_locator_filename): Rename to ...
6609         (tui_update_locator_fullname): ... here.
6610         * tui/tui-winsource.c (tui_display_main): Rename the callee to
6611         tui_update_locator_fullname.  Replace symtab->filename refererence by
6612         symtab_to_fullname call.
6613         * tui/tui.c (tui_show_source): Rename its parameter to fullname.
6614         Rename the callee to tui_update_locator_fullname.
6615         * tui/tui.h (tui_show_source): Rename its parameter to fullname.
6616
6617 2013-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
6618
6619         * ada-lang.c (user_select_syms): Replace symtab->filename refererences
6620         by symtab_to_filename_for_display calls.
6621         * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
6622         (clear_command): New variable sal_fullname, initialize it.  Replace
6623         compare_filenames_for_search by filename_cmp with sal_fullname.
6624         (say_where, update_static_tracepoint): Replace symtab->filename
6625         refererences by symtab_to_filename_for_display calls.
6626         * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
6627         Likewise.
6628         * dwarf2read.c: Include source.h.
6629         (fixup_go_packaging): Replace symtab->filename refererences by
6630         symtab_to_filename_for_display calls.
6631         * linespec.c (add_sal_to_sals): Rename variable filename to fullname.
6632         Replace symtab->filename refererences by symtab_to_filename_for_display
6633         calls.
6634         (create_sals_line_offset, convert_linespec_to_sals): New variable
6635         fullname, initialize it, replace symtab->filename reference by the
6636         variable.
6637         * linux-fork.c: Include source.h.
6638         (info_checkpoints_command): Replace symtab->filename refererences by
6639         symtab_to_filename_for_display calls.
6640         * macroscope.c (sal_macro_scope): Replace symtab->filename refererences
6641         by symtab_to_filename_for_display calls.
6642         * mdebugread.c: Include source.h.
6643         (psymtab_to_symtab_1): Replace symtab->filename refererences by
6644         symtab_to_filename_for_display calls.
6645         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
6646         (mi_cmd_file_list_exec_source_files): Likewise.
6647         * printcmd.c: Include source.h.
6648         (build_address_symbolic): Replace symtab->filename refererences by
6649         symtab_to_filename_for_display calls.
6650         * psymtab.c (partial_map_symtabs_matching_filename)
6651         (read_psymtabs_with_fullname): Call compare_filenames_for_search also
6652         with psymtab_to_fullname.
6653         * python/py-symtab.c (stpy_str): Replace symtab->filename refererences
6654         by symtab_to_filename_for_display calls.
6655         (stpy_get_filename): New variable filename, initialize it, use instead
6656         of symtab->filename refererences.
6657         (salpy_str): Make variable filename const char *.  Replace
6658         symtab->filename refererences by symtab_to_filename_for_display calls.
6659         * skip.c: Include source.h and filenames.h.
6660         (skip_file_command): Remove const from the symtab variable.  Replace
6661         symtab->filename refererences by symtab_to_fullname call.
6662         (function_name_is_marked_for_skip): New variables searched_for_fullname
6663         and fullname.  Use them to search also with symtab's fullname.
6664         * source.c (find_source_lines): Replace symtab->filename refererences
6665         by symtab_to_filename_for_display calls.
6666         (print_source_lines_base): New variable filename, use it instead of
6667         symtab->filename.  Replace symtab->filename refererences by
6668         symtab_to_filename_for_display calls.
6669         (line_info, forward_search_command): Replace symtab->filename
6670         refererences by symtab_to_filename_for_display calls.
6671         (reverse_search_command): Replace symtab->filename refererences by
6672         symtab_to_filename_for_display calls.  New variable filename for it.
6673         * stack.c (frame_info): Likewise.
6674         * symmisc.c: Include source.h.
6675         (dump_objfile, dump_symtab_1, maintenance_print_symbols)
6676         (maintenance_info_symtabs): Replace symtab->filename refererences by
6677         symtab_to_filename_for_display calls.
6678         * symtab.c (iterate_over_some_symtabs): Call
6679         compare_filenames_for_search also with symtab_to_fullname.
6680         (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
6681         symtab->filename refererences by symtab_to_filename_for_display calls.
6682         (find_line_symtab): Replace symtab->filename refererences by
6683         symtab_to_filename_for_display calls.
6684         (file_matches): Replace filename_cmp by compare_filenames_for_search.
6685         (print_symbol_info): Make the last parameter const char *.  New
6686         variable s_filename.  Use it in the function.
6687         (symtab_symbol_info): Make the last_filename variable const char *.
6688         Replace symtab->filename refererences by symtab_to_filename_for_display
6689         calls.
6690         (rbreak_command): New variable fullname.  Use it.  Replace
6691         symtab->filename refererence by symtab_to_filename_for_display call.
6692         * tracepoint.c (set_traceframe_context, trace_find_line_command)
6693         (print_one_static_tracepoint_marker): Replace symtab->filename
6694         refererences by symtab_to_filename_for_display calls.
6695         * tui/tui-source.c (tui_set_source_content): New variables filename and
6696         s_filename.  Replace symtab->filename refererences by this variable.
6697         Replace other symtab->filename refererences by
6698         symtab_to_filename_for_display calls.
6699
6700 2013-02-03  Eldar Gaynetdinov <hal9000ed2k@gmail.com>
6701             Jan Kratochvil  <jan.kratochvil@redhat.com>
6702
6703         Add a new variable that controls a way in which filenames are
6704         displayed.
6705         * NEWS (set filename-display): New entry.
6706         * source.c (filename_display_basename, filename_display_relative)
6707         (filename_display_absolute, filename_display_kind_names)
6708         (filename_display_string, show_filename_display_string)
6709         (symtab_to_filename_for_display): New.
6710         (_initialize_source): Added initialization of 'filename-display'
6711         variable.
6712         * source.h (symtab_to_filename_for_display): Added declaration.
6713         * stack.c (print_frame): Added new variable and calling of a new
6714         function and condition with this variable. Changed third argument of
6715         calling of a function.
6716
6717 2013-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
6718
6719         * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
6720         Rename field reference filename to fullname.
6721         * tui/tui-data.h (struct tui_source_info): Rename field filename to
6722         fullname.  New comment for it.
6723         * tui/tui-source.c (tui_set_source_content): Rename field reference
6724         filename to fullname.  Initialize field by symtab_to_fullname now.
6725         * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
6726         reference filename to fullname.  Use symtab_to_fullname during
6727         comparison.
6728
6729 2013-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
6730
6731         Code cleanup.
6732         * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
6733         (dw2_expand_symtabs_with_fullname): ... here.  Rename parameter
6734         filename to fullname.  Rename variable this_name to this_fullname.
6735         Lowercase FILENAME_CMP call.
6736         (dw2_find_symbol_file): New comment for the returned string.
6737         (dwarf2_gdb_index_functions): Rename the function to
6738         dw2_expand_symtabs_with_fullname.
6739         * psymtab.c (read_psymtabs_with_filename): Rename to ...
6740         (read_psymtabs_with_fullname): ... here.  Rename parameter filename to
6741         fullname.
6742         (psym_functions): Rename the function to read_psymtabs_with_fullname.
6743         * symfile.h (struct quick_symbol_functions): Rename field
6744         expand_symtabs_with_filename to expand_symtabs_with_fullname and its
6745         parameter filename to fullname.  Document returned string meaning for
6746         find_symbol_file.
6747         * symtab.c (find_line_symtab): Rename the called function to
6748         expand_symtabs_with_fullname.
6749
6750 2013-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
6751
6752         Code cleanup.
6753         * breakpoint.c (clear_command): Remove variable is_abs, unify the
6754         call of filename_cmp with compare_filenames_for_search.
6755         * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
6756         is_abs, unify the call of FILENAME_CMP with
6757         compare_filenames_for_search.  New gdb_asserts for real_path and name.
6758         Unify the call of compare_filenames_for_search with FILENAME_CMP.
6759         * psymtab.c (partial_map_symtabs_matching_filename): Likewise.
6760         * symfile.h (struct quick_symbol_functions): Extend the comment for
6761         map_symtabs_matching_filename.
6762         * symtab.c (compare_filenames_for_search): Remove the function comment
6763         relative path requirement.  Handle absolute filenames, with a comment.
6764         (iterate_over_some_symtabs): Remove variable is_abs, unify the call of
6765         FILENAME_CMP with compare_filenames_for_search.  New gdb_asserts for
6766         real_path and name.  Unify the call of compare_filenames_for_search
6767         with FILENAME_CMP.
6768         (iterate_over_symtabs): New gdb_assert on REAL_PATH.
6769
6770 2013-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
6771
6772         Code cleanup.
6773         * breakpoint.c (print_breakpoint_location): Replace bp_location field
6774         source_file references by symtab field references.  Remove variables
6775         sal and fullname.
6776         (momentary_breakpoint_from_master, add_location_to_breakpoint):
6777         (clear_command, say_where): Replace bp_location field source_file
6778         references by symtab field references.
6779         (bp_location_dtor): Remove the source_file reference.
6780         (update_static_tracepoint): Replace bp_location field source_file
6781         references by symtab field references.
6782         (breakpoint_free_objfile): New function.
6783         * breakpoint.h (struct bp_location): Extend the comment for line_number.
6784         Replace the field source_file by field symtab, extend its comment.
6785         (breakpoint_free_objfile): New declaration.
6786         * objfiles.c (free_objfile): Call breakpoint_free_objfile.
6787         * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
6788         field source_file references by symtab field references.
6789
6790 2013-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
6791
6792         Replace xfullpath calls by gdb_realpath calls.
6793         * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
6794         function comment.
6795         * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
6796         Remove it from the iterate_over_some_symtabs call.
6797         (dw2_map_symtabs_matching_filename): Remove parameter full_path.
6798         Remove it from the dw2_map_expand_apply calls, remove a block handling
6799         it.
6800         * psymtab.c (partial_map_expand_apply): Remove parameter full_path.
6801         Remove it from the iterate_over_some_symtabs call.
6802         (partial_map_symtabs_matching_filename): Remove parameter full_path.
6803         Remove it from the partial_map_expand_apply calls, remove a block
6804         handling it.  Drop gdb_realpath call and cleanups from the real_path
6805         handling.
6806         * source.c (openp): Drop the comment part about xfullpath.  Replace
6807         xfullpath calls by gdb_realpath calls.
6808         (find_and_open_source): Replace xfullpath call by gdb_realpath call.
6809         * symfile.h (struct quick_symbol_functions): Remove parameter full_path
6810         from method map_symtabs_matching_filename and its comment.
6811         * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
6812         gdb_realpath call.
6813         * symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
6814         remove it also from the function comment, remove a block handling it.
6815         Drop gdb_realpath call and cleanups from the real_path handling.
6816         (iterate_over_symtabs): Drop variable full_path and its use.
6817         * symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
6818         * utils.c (xfullpath): Remove.
6819         * utils.h (xfullpath): Remove.
6820
6821 2013-02-01  Andreas Tobler  <andreast@fgznet.ch>
6822
6823         * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
6824         (HFILES_NO_SRCDIR): Add ppc64-tdep.h.
6825         (ALLDEPFILES): Add ppc64-tdep.c.
6826         * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
6827         ppc64-tdep.o to gdb_target_obs.
6828         * ppc64-tdep.h: New file.
6829         * ppc64-tdep.c: New file.
6830         (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
6831         ppc-linux-tdep.c to here.
6832         (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
6833         (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
6834         (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
6835         (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
6836         from ppc-linux-tdep.c to here.
6837         (ppc64_convert_from_func_ptr_addr): Rename from
6838         ppc64_linux_convert_from_func_ptr_addr to
6839         ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
6840         here.
6841         * rs6000-tdep.c:
6842         (read_insn): Move from ppc-linux-tdep.c to here.
6843         (insns_match_pattern, insn_d_field, insn_ds_field): Move
6844         from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
6845         * ppc-linux-tdep.c: Include ppc64-tdep.h.
6846         Removed above functions.
6847         (ppc_linux_init_abi): Adjust.
6848
6849 2013-02-01  Aleksandar Ristovski  <aristovski@qnx.com>
6850
6851         * ada-valprint.c (ada_print_floating): Remove unused 'len'.
6852
6853 2013-02-01  Aleksandar Ristovski  <aristovski@qnx.com>
6854
6855         * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.
6856
6857 2013-02-01  Pedro Alves  <palves@redhat.com>
6858
6859         * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
6860         * frame.h (deprecated_pc_in_call_dummy): Delete declaration.
6861
6862 2013-02-01  Jan Kratochvil  <jan.kratochvil@redhat.com>
6863
6864         * elfread.c (elf_symfile_read): Limit separate debug info additions to
6865         files with no separate debug info.
6866         * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
6867         * symfile.c (read_symbols): Call find_separate_debug_file_in_section
6868         only for files with no separate debug info.
6869
6870 2013-01-31  Tom Tromey  <tromey@redhat.com>
6871
6872         * jit.c (jit_program_space_data): Rename from jit_inferior_data;
6873         change type.
6874         (struct jit_program_space_data): Rename from jit_inferior_data.
6875         Update comments.
6876         (get_jit_program_space_data): Rename from get_jit_inferior_data.
6877         Change return type.  Attach data to program space.
6878         (jit_program_space_data_cleanup): Rename from
6879         jit_inferior_data_cleanup; change argument type.
6880         (jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
6881         change type.
6882         (jit_register_code): Update.
6883         (jit_update_inferior_cache): Remove.
6884         (jit_breakpoint_deleted): Get jit data from the location's program
6885         space.
6886         (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
6887         'ps_data', change type.
6888         (jit_inferior_init, jit_breakpoint_re_set_internal)
6889         (jit_event_handler): Update.
6890         (free_objfile_data): Get data from objfile's program space.
6891         (_initialize_jit): Update.
6892
6893 2013-01-31  Tom Tromey  <tromey@redhat.com>
6894
6895         PR gdb/13987:
6896         * jit.c (struct jit_inferior_data) <cached_code_address,
6897         jit_breakpoint>: New fields.
6898         (jit_breakpoint_re_set_internal): Fix logging.  Only create
6899         breakpoint if cached address has changed.
6900         (jit_update_inferior_cache, jit_breakpoint_deleted): New
6901         functions.
6902         (_initialize_jit): Register breakpoint deleted observer.
6903
6904 2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>
6905
6906         * infrun.c (handle_syscall_event): Remove unused gdbarch.
6907         (save_infcall_suspend_state): Ifdef out unused inf.
6908         (restore_infcall_suspend_state): Ifdef out unused inf.
6909         * jit.c (jit_register_code): Remove unused i, b, inf_data.
6910         (jit_frame_sniffer): Remove unused inf_data.
6911
6912 2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>
6913
6914         * c-exp.y (classify_inner_name): Remove unused type.
6915         * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
6916         in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
6917         need_escape.
6918         (c_get_string): Remove unused kind.
6919         * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.
6920
6921 2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>
6922
6923         * charset.c (intermediate_encoding): Remove unused i.
6924         * completer.c (signal_completer): Remove unused i.
6925         * continuations.c (discard_my_continuations_1): Remove unused
6926         continuation_ptr.
6927         * corelow.c (core_close): Remove unuseD name.
6928         (get_core_siginfo): Remove unused pid.
6929         * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
6930         i, cps.
6931         * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
6932         (loclist_describe_location): Remove unused first.
6933         * event-top.c (command_line_handler): Remove unused got_eof.
6934         * exec.c (exec_close_1): Remove unused need_symtab_cleanup.
6935         (resize_section_table): Remove unused old_value.
6936         * gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
6937         * gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
6938         * i386-tdep.c (i386_process_record): Remove unused rex.
6939         * infcmd.c (get_return_value): Remove unused uiout.
6940         * jv-lang.c (type_from_class): Remove unused is_array.
6941         * jv-valprint.c (java_val_print): Remove unused i.
6942         * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
6943         * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
6944         * m2-typeprint.c (m2_print_type): Remove unused code.
6945         * macroexp.c (get_character_constant): Remove unused body_start.
6946         (macro_stringify): Remove unused result.
6947         * objc-lang.c (find_methods): Remove unused gdbarch.
6948         * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
6949         * regcache.c (regcache_cooked_read): Remove unused gdbarch.
6950         * stack.c (print_frame_args): Remove unused summary.
6951         * thread.c (thread_apply_command): Remove unused p.
6952         * valarith.c (value_x_unop): Remove unused mangle_ptr.
6953         * valops.c (search_struct_method): Remove unused skip.
6954         * valprint.c (generic_val_print): Remove unused byte_order.
6955         * varobj.c (varobj_update): Remove unused changed.
6956         * cli/cli-cmds.c (complete_command): Remove unused next_item.
6957         (alias_command): Remove unused c.
6958         * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
6959         * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
6960         format.
6961         (mi_cmd_data_write_memory): Remove unused word_format.
6962         (mi_cmd_data_write_memory_bytes): Remove unused r.
6963         * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
6964         p_start, p_end.
6965         * python/python.c (_initialize_python): Remove unused cmd_name, cmd.
6966         * tui/tui-disasm.c (tui_set_disassem_content): Remove unused
6967         line_width.
6968
6969 2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>
6970
6971         * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
6972         * symtab.c (iterate_over_symtabs): Remove unused s.
6973         (find_pc_sect_symtab): Remove unused pspAce.
6974         (find_pc_sect_line): Remove unused alt_symtab.
6975         (find_pcs_for_symtab_line): Remove unused ix, previous_function.
6976         (completion_list_add_name): Remove unused newsize.
6977
6978 2013-01-31  Tom Tromey  <tromey@redhat.com>
6979
6980         PR c++/14998:
6981         * dwarf2read.c (read_tag_ptr_to_member_type): Handle
6982         TYPE_CODE_FUNC.
6983
6984 2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>
6985
6986         * target.c (target_read_string): Remove unused origlen.
6987
6988 2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>
6989
6990         * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
6991         * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
6992         * ax-general.c (ax_print): Remove unused is_float.
6993         * blockframe.c (block_innermost_frame): Remove unused start, end.
6994         * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.
6995
6996 2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>
6997
6998         * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
6999         (svr4_read_so_list): Remove unused lmo.
7000         * solib-target.c (solib_target_relocate_section_addresses): Remove
7001         unused flags.
7002
7003 2013-01-30  Tom Tromey  <tromey@redhat.com>
7004
7005         * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".
7006
7007 2013-01-30  Tom Tromey  <tromey@redhat.com>
7008
7009         * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
7010         * utils.c (gnu_debuglink_crc32): Remove.
7011         * utils.h (gnu_debuglink_crc32): Don't declare.
7012
7013 2013-01-30  Tom Tromey  <tromey@redhat.com>
7014
7015         * dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
7016         (read_structure_type, read_enumeration_type): Remove cast.
7017
7018 2013-01-30  Tom Tromey  <tromey@redhat.com>
7019
7020         * dwarf2read.c (read_namespace_type): Remove cast.
7021         (read_typedef): Likewise.
7022
7023 2013-01-29  Tom Tromey  <tromey@redhat.com>
7024
7025         * dwarf2read.c (free_dwo_file): Remove assert.
7026
7027 2013-01-29  Tom Tromey  <tromey@redhat.com>
7028
7029         * value.c (deprecated_set_value_modifiable): Remove.
7030         * value.h (deprecated_set_value_modifiable): Remove.
7031
7032 2013-01-28  Doug Evans  <dje@google.com>
7033
7034         * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
7035         to addresses from dwo files.
7036
7037 2013-01-25  Siva Chandra Reddy  <sivachandra@google.com>
7038
7039         * valops.c (find_overload_match): Remove unused argument 'lax'.
7040         * value.h: Remove unused argument 'lax' from the declaration of
7041         find_overload_match.
7042         * eval.c (value_subexp_standard): Do not pass a 'lax' argument
7043         to find_overload_match.
7044         * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
7045         argument to find_overload_match.
7046
7047 2013-01-25  Tom Tromey  <tromey@redhat.com>
7048
7049         * dwarf2read.c (processing_has_namespace_info): Remove.
7050         (struct dwarf2_cu) <processing_has_namespace_info>: New field.
7051         (process_die, read_func_scope, dwarf2_start_symtab)
7052         (new_symbol_full): Update.
7053
7054 2013-01-25  Tom Tromey  <tromey@redhat.com>
7055
7056         * cp-namespace.c (cp_set_block_scope): Remove.
7057         * cp-support.h (cp_set_block_scope): Remove.
7058         * dbxread.c: Include block.h.
7059         (cp_set_block_scope): New function.
7060         (process_one_symbol): Update.
7061         * dwarf2read.c (read_func_scope): Use block_set_scope.
7062
7063 2013-01-25  Pedro Alves  <palves@redhat.com>
7064
7065         * remote.c (add_current_inferior_and_thread): Tweak comment.
7066
7067 2013-01-25  Tom Tromey  <tromey@redhat.com>
7068
7069         * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
7070         (cp_add_using_directive): Add 'copy_names' argument.
7071         * cp-support.h (cp_add_using_directive): Update.
7072         (struct using_direct) <import_src, import_dest, alias,
7073         declaration>: Now const.
7074         * dwarf2read.c (read_import_statement): Use obconcat.
7075         Don't copy names passed to cp_add_using_directive.
7076
7077 2013-01-25  Tom Tromey  <tromey@redhat.com>
7078
7079         * c-exp.y (qualified_name): Use TYPE_SAFE_NAME.
7080
7081 2013-01-25  Pedro Alves  <palves@redhat.com>
7082
7083         * remote.c (stop_reply_extract_thread): New.
7084         (add_current_inferior_and_thread): New parameter 'wait_status'.
7085         Handle it.
7086         (remote_start_remote): Pass wait status to
7087         add_current_inferior_and_thread.
7088         (extended_remote_run): Update comment.
7089         (extended_remote_create_inferior_1): Pass wait status to
7090         add_current_inferior_and_thread.
7091
7092 2013-01-25  Andrew Burgess  <aburgess@broadcom.com>
7093             Ulrich Weigand  <uweigand@de.ibm.com>
7094
7095         * valarith.c (value_vector_widen): New function for replicating a
7096         scalar into a vector.
7097         (value_binop): Use value_vector_widen to widen scalar to vector
7098         rather than casting, this better matches gcc C behaviour.
7099         * valops.c (value_casst): Update logic for casting between vector
7100         types, and for casting from scalar to vector, try to match gcc C
7101         behaviour.
7102         * value.h (value_vector_widen): Declare.
7103         * opencl-lang.c (opencl_value_cast): New opencl specific casting
7104         function, handle special case for casting scalar to vector.
7105         (opencl_relop): Use opencl_value_cast.
7106         (evaluate_subexp_opencl): Use opencl_value_cast instead of
7107         value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
7108         in order to use opencl_value_cast.
7109
7110 2013-01-25  Yao Qi  <yao@codesourcery.com>
7111
7112         * event-loop.c: Include "queue.h".
7113         (gdb_event_p): New typedef.
7114         (DECLARE_QUEUE_P): Use.
7115         (DEFINE_QUEUE_P): Use.
7116         (async_queue_event): Remove.
7117         (gdb_event_xfree): New.
7118         (initialize_event_loop): New.
7119         (process_event): Use QUEUE macros.
7120         (event_queue): Remove.
7121         (gdb_wait_for_event): Caller update.
7122         (check_async_event_handlers): Likewise.
7123         (poll_timers): Likewise.
7124         * event-loop.h (initialize_event_loop): Declare.
7125         * event-loop.c (gdb_event_xfree): New.
7126         * top.c (gdb_init): Call initialize_event_loop.
7127
7128 2013-01-25  Yao Qi  <yao@codesourcery.com>
7129
7130         * event-loop.c (async_queue_event): Remove one parameter
7131         'position'.  Remove code handling 'position' == TAIL.
7132         (gdb_wait_for_event): Caller update.
7133         (check_async_event_handlers): Caller update.
7134         (poll_timers): Caller update.
7135         * event-loop.h (enum queue_position): Remove.
7136
7137 2013-01-25  Maxim Kuvyrkov  <maxim@kugelworks.com>
7138
7139         * MAINTAINERS: Update my email.
7140
7141 2013-01-25  Yao Qi  <yao@codesourcery.com>
7142
7143         * main.c (print_gdb_help): Remove "--epoch" from the help
7144         message.
7145
7146 2013-01-24  Ulrich Weigand  <uweigand@de.ibm.com>
7147
7148         * symtab.c (skip_prologue_using_sal): Consider a file
7149         change the same as an increased line number
7150
7151 2013-01-24  Tiago Stürmer Daitx  <tdaitx@linux.vnet.ibm.com>
7152
7153         * MAINTAINERS (Write After Approval): Add myself to the list.
7154
7155 2013-01-24  Tom Tromey  <tromey@redhat.com>
7156
7157         * ada-lang.h (ada_decode_symbol): Make return type const.
7158         * ada-lang.c (ada_decode_symbol): Likewise.
7159
7160 2013-01-23  Doug Evans  <dje@google.com>
7161
7162         * linespec.c (find_linespec_symbols): Make static.
7163
7164 2013-01-23  Tiago Stürmer Daitx  <tdaitx@linux.vnet.ibm.com>
7165
7166         * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
7167         type on float conversion for complex type.
7168
7169 2013-01-23  Siva Chandra Reddy  <sivachandra@google.com>
7170
7171         Add a new class gdb.Architecture which exposes GDB's
7172         internal representation of architecture via GDB Python API.
7173         * Makefile.in: Add entries corresponding to the new file
7174         python/py-arch.c.
7175         * NEWS (Python Scripting): Add entries for the new class
7176         gdb.Architecture and the new method gdb.Frame.architecture.
7177         * python/py-arch.c: Implement gdb.Architecture class.
7178         * python/py-frame.c (frapy_arch): Implement the method
7179         gdb.Frame.architecture().
7180         (frame_object_methods): Add 'architecture' to the method table.
7181         * python/python-internal.h: Add declarations of new utility
7182         functions.
7183         * python/python.c (_initialize_python): Initialize
7184         gdb.Architecture class.
7185
7186 2013-01-23  Doug Evans  <dje@google.com>
7187
7188         Work around binutils/15021.
7189         * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
7190         type_unit_group out of union s.  All uses updated.
7191         (read_index_from_section): Watch for index version 8.
7192         (follow_die_sig): If using .gdb_index version <= 7, record the TU as
7193         an imported symtab.
7194         (write_psymtabs_to_index): Increment version number to 8.
7195
7196 2013-01-22  Pedro Alves  <palves@redhat.com>
7197
7198         * annotate.c (breakpoint_changed): Skip if breakpoint is not
7199         user-visible.
7200
7201 2013-01-22  Pedro Alves  <palves@redhat.com>
7202
7203         * annotate.c (annotate_breakpoints_changed): Rename to ...
7204         (annotate_breakpoints_invalid): ... this.  Make static.
7205         (breakpoint_changed): Adjust.
7206         (_initialize_annotate): Always install the observers.  Install a
7207         "breakpoint_created" observer.
7208         * annotate.h (annotate_breakpoints_changed): Delete declaration.
7209         * breakpoint.c (set_breakpoint_condition)
7210         (breakpoint_set_commands, do_map_commands_command)
7211         (init_raw_breakpoint, clear_command, set_ignore_count)
7212         (enable_breakpoint_disp): No longer call
7213         annotate_breakpoints_changed.
7214
7215 2013-01-22  Pedro Alves  <palves@redhat.com>
7216
7217         * annotate.c: Include "inferior.h".
7218         (frames_invalid_emitted)
7219         (breakpoints_invalid_emitted): New globals.
7220         (async_background_execution_p): New function.
7221         (annotate_breakpoints_changed, annotate_frames_invalid): Skip
7222         emitting the annotation if it has already been emitted.
7223         (annotate_display_prompt): New function.
7224         * annotate.h (annotate_display_prompt): New declaration.
7225         * event-top.c: Include annotate.h.
7226         (display_gdb_prompt): Call annotate_display_prompt.
7227
7228 2013-01-22  Pedro Alves  <palves@redhat.com>
7229
7230         * annotate.c (ignore_count_changed): Delete.
7231         (annotate_breakpoints_changed): Don't clear ignore_count_changed.
7232         (annotate_ignore_count_change): Delete.
7233         (annotate_stopped): Don't emit a delayed breakpoints-changed
7234         annotation.
7235         * annotate.h (annotate_ignore_count_change): Delete.
7236         * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
7237         annotate_ignore_count_change.
7238
7239 2013-01-22  Tom Tromey  <tromey@redhat.com>
7240
7241         * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
7242         require_rvalue for a register location.
7243
7244 2013-01-21  Marc Khouzam  <marc.khouzam@ericsson.com>
7245
7246         * breakpoint.c (print_one_breakpoint_location): Add MI
7247         field 'thread-groups' when printing a breakpoint.
7248         (output_thread_groups): New function.
7249
7250 2013-01-21  Siva Chandra Reddy  <sivachandra@google.com>
7251
7252         * python/lib/gdb/commands/explore.py
7253         (CompoundExplorer.explore_expr): Correct the name of a method
7254         being invoked.
7255         (ExploreTypeCommand.invoke): Add a missing 'return'.
7256
7257 2013-01-21  Tom Tromey  <tromey@redhat.com>
7258
7259         * gdb_obstack.h (obconcat): Move declaration here, from...
7260         * symfile.h (obconcat): ... here.
7261         * gdb_obstack.c: New file.
7262         (obconcat): Move from...
7263         * symfile.c (obconcat): ... here.
7264         * Makefile.in (SFILES): Add gdb_obstack.c.
7265         (COMMON_OBS): Add gdb_obstack.o.
7266
7267 2013-01-21  Tom Tromey  <tromey@redhat.com>
7268
7269         * symfile.h (obsavestring): Don't declare.
7270         * symfile.c (obsavestring): Remove.
7271         * ada-exp.y: Use obstack_copy0, not obsavestring.
7272         * ada-lang.c: Use obstack_copy0, not obsavestring.
7273         * coffread.c: Use obstack_copy0, not obsavestring.
7274         * cp-namespace.c: Use obstack_copy0, not obsavestring.
7275         * dbxread.c: Use obstack_copy0, not obsavestring.
7276         * dwarf2read.c: Use obstack_copy0, not obsavestring.
7277         * jit.c: Use obstack_copy0, not obsavestring.
7278         * mdebugread.c: Use obstack_copy0, not obsavestring.
7279         * psymtab.c: Use obstack_copy0, not obsavestring.
7280         * stabsread.c: Use obstack_copy0, not obsavestring.
7281         * xcoffread.c: Use obstack_copy0, not obsavestring.
7282
7283 2013-01-21  Tom Tromey  <tromey@redhat.com>
7284
7285         * dwarf2read.c (fixup_go_packaging): Save package name
7286         on objfile obstack.
7287         * gdbtypes.c (init_type): Don't copy name.
7288
7289 2013-01-21  Tom Tromey  <tromey@redhat.com>
7290
7291         * dwarf2read.c (struct partial_die_info) <name, scope>: Now
7292         const.
7293         (struct attribute) <u.str>: Now const.
7294         (struct fnfieldlist) <name>: Now const.
7295         (dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
7296         (partial_die_parent_scope): Make return type const.
7297         (partial_die_full_name, add_partial_symbol): Update.
7298         (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
7299         'name' const.
7300         (find_file_and_directory): Make 'name' and 'comp_dir' const.
7301         (read_file_scope, read_func_scope, dwarf2_add_field)
7302         (dwarf2_add_member_fn, read_structure_type)
7303         (process_enumeration_scope, read_array_type, read_module_type)
7304         (read_base_type, read_subrange_type): Update.
7305         (dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
7306         (new_symbol_full, guess_full_die_structure_name): Update.
7307         (dwarf2_canonicalize_name): Return const type.  Make 'name' const.
7308         (dwarf2_name): Return const type.
7309         (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
7310         const.
7311
7312 2013-01-21  Tom Tromey  <tromey@redhat.com>
7313
7314         * gdbtypes.c (init_type): Make 'name' const.
7315         * gdbtypes.h (init_type): Update.
7316
7317 2013-01-21  Tom Tromey  <tromey@redhat.com>
7318
7319         * buildsym.c (patch_subfile_names): Use set_last_source_file.
7320         (start_symtab): Make 'name' and 'dirname' const.  Use
7321         set_last_source_file.
7322         (restart_symtab, reset_symtab_globals): Use set_last_source_file.
7323         (last_source_file): Define.  Now static.
7324         (set_last_source_file, get_last_source_file): New functions.
7325         * buildsym.h (last_source_file): Don't declare.
7326         (start_symtab): Update.
7327         (set_last_source_file, get_last_source_file): Declare.
7328         * coffread.c (complete_symtab): Use set_last_source_file.
7329         (coff_end_symtab): Likewise.
7330         (coff_symtab_read): Use set_last_source_file, get_last_source_file.
7331         * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
7332         set_last_source_file.
7333         (process_one_symbol): Use get_last_source_file.
7334         * mdebugread.c (parse_partial_symbols): Use set_last_source_file.
7335         (psymtab_to_symtab_1): Use get_last_source_file.
7336         * xcoffread.c (process_linenos): Use get_last_source_file.
7337         (complete_symtab): Use set_last_source_file.
7338         (read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
7339         (scan_xcoff_symtab): Use set_last_source_file.
7340
7341 2013-01-21  Tom Tromey  <tromey@redhat.com>
7342
7343         * symtab.c (struct demangled_name_entry) <mangled>: Now const.
7344         (symbol_set_names): Remove casts.  Handle field const-ness.
7345
7346 2013-01-21  Tom Tromey  <tromey@redhat.com>
7347
7348         * dwarf2read.c (new_symbol_full): Remove cast.
7349         * symtab.c (symbol_set_demangled_name): Make 'name' const.
7350         * symtab.h (symbol_set_demangled_name): Update.
7351
7352 2013-01-21  Tom Tromey  <tromey@redhat.com>
7353
7354         * main.c (captured_main): Call bfd_init.
7355
7356 2013-01-21  Tom Tromey  <tromey@redhat.com>
7357
7358         * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
7359         * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
7360         * minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
7361         * NEWS: Update.
7362
7363 2013-01-21  Jan Kratochvil  <jan.kratochvil@redhat.com>
7364
7365         * symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
7366
7367 2013-01-21  Jan Kratochvil  <jan.kratochvil@redhat.com>
7368
7369         Fix gdb.fortran/common-block.exp crash in PIE mode.
7370         * dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
7371         LOC_COMMON_BLOCK.
7372         * f-valprint.c (info_common_command_for_block): Expect
7373         LOC_COMMON_BLOCK in gdb_assert.
7374         * symtab.h (struct general_symbol_info): Update comment for the
7375         common_block member.
7376         (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
7377         (enum address_class): New member LOC_COMMON_BLOCK.
7378
7379 2013-01-18  David Blaikie  <dblaikie@gmail.com>
7380
7381         * MAINTAINERS (Write After Approval): Add "David Blaikie".
7382
7383 2013-01-18  Tom Tromey  <tromey@redhat.com>
7384
7385         PR c++/14999:
7386         * dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
7387         Call require_rvalue.
7388
7389 2013-01-18  Yao Qi  <yao@codesourcery.com>
7390
7391         * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
7392         (dbx_read_symtab): New declaration.
7393         (dbx_psymtab_to_symtab): Delete.
7394         (dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
7395         Rename parameter PST to SELF.  Exchanged two parameters.
7396         (start_psymtab): Caller update.
7397         * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
7398         (dwarf2_read_symtab): New declaration.
7399         (dwarf2_psymtab_to_symtab): Delete.
7400         (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
7401         Rename parameter PST to SELF.  Exchanged two parameters.
7402         (create_partial_symtab): Caller update.
7403         * mdebugread.c (mdebug_psymtab_to_symtab): Delete.
7404         (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
7405         Rename parameter PST to SELF.  Exchanged two parameters.
7406         (parse_partial_symbols, new_psymtab): Caller update.
7407         * psympriv.h (struct partial_symtab) <read_symtab>: Exchange
7408         two parameters.
7409         * psymtab.c (psymtab_to_symtab): Caller update.
7410         * xcoffread.c (xcoff_psymtab_to_symtab): Delete.
7411         (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
7412         Rename parameter PST to SELF.  Exchanged two parameters.
7413         (xcoff_start_psymtab): Caller update.
7414
7415 2013-01-18  Yao Qi  <yao@codesourcery.com>
7416
7417         * infrun.c (proceed): Rename local variable 'oneproc' to
7418         'force_step'.
7419
7420 2013-01-17  Doug Evans  <dje@google.com>
7421
7422         * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
7423         (dw2_build_type_unit_groups): Delete.  All uses updated.
7424
7425         * symtab.h (struct symbol_search): Add comment.
7426
7427 2013-01-17  Jan Kratochvil  <jan.kratochvil@redhat.com>
7428
7429         * symtab.c (compare_filenames_for_search): New comment for
7430         HAS_DRIVE_SPEC.
7431
7432 2013-01-17  Tom Tromey  <tromey@redhat.com>
7433
7434         * cp-abi.c (cp_abi_completer): Fix typo in assignment.
7435
7436 2013-01-17  Jan Kratochvil  <jan.kratochvil@redhat.com>
7437
7438         * symtab.c (iterate_over_some_symtabs): New variable cleanups,
7439         initialize it by existing make_cleanup.  Call new do_cleanups.
7440
7441 2013-01-17  Tom Tromey  <tromey@redhat.com>
7442
7443         * cp-abi.c (cp_abi_completer): New function.
7444         (_initialize_cp_abi): Set completer for "set cp-abi".
7445
7446 2013-01-17  Tom Tromey  <tromey@redhat.com>
7447
7448         * mem-break.c: Remove obsolete comment.
7449         * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
7450
7451 2012-01-17  Sanjoy Das <sanjoy@playingwithpointers.com>
7452
7453         * jit.c (jit_reader_load_command): Interpret the jit reader name
7454         as an absolute path if it begins with a forward slash.
7455
7456 2012-01-17  Sanjoy Das <sanjoy@playingwithpointers.com>
7457
7458         PR gdb/14550
7459
7460         * jit.c (finalize_symtab): Ensure that only the global block has a
7461         NULL superblock.
7462
7463 2013-01-17  Pedro Alves  <palves@redhat.com>
7464
7465         * acinclude.m4: Include ../config/plugins.m4,
7466         ../config/largefile.m4 and ../config/lead-dot.m4.  Add comments.
7467         * Makefile.in (aclocal_m4_deps): Update.
7468         * aclocal.m4: Renegerate.
7469
7470 2013-01-16  Doug Evans  <dje@google.com>
7471
7472         * contrib/cc-with-tweaks.sh: Add references to Fission docs.
7473
7474 2013-01-16  Pedro Alves  <palves@redhat.com>
7475             Tom Tromey  <tromey@redhat.com>
7476
7477         PR cli/7221:
7478         * NEWS: Add "catch signal".
7479         * breakpoint.c (base_breakpoint_ops): No longer static.
7480         (bpstat_explains_signal): New function.
7481         (init_catchpoint): No longer static.
7482         (base_breakpoint_explains_signal): New function.
7483         (base_breakpoint_ops): Initialize new field.
7484         * breakpoint.h (enum bpstat_signal_value): New.
7485         (struct breakpoint_ops) <explains_signal>: New field.
7486         (bpstat_explains_signal): Remove macro, declare as function.
7487         (base_breakpoint_ops, init_catchpoint): Declare.
7488         * break-catch-sig.c: New file.
7489         * inferior.h (signal_catch_update): Declare.
7490         * infrun.c (signal_catch): New global.
7491         (handle_syscall_event): Update for change to
7492         bpstat_explains_signal.
7493         (handle_inferior_event): Likewise.  Always handle random signals
7494         via bpstats.
7495         (signal_cache_update): Check signal_catch.
7496         (signal_catch_update): New function.
7497         (_initialize_infrun): Initialize signal_catch.
7498         * Makefile.in (SFILES): Add break-catch-sig.c.
7499         (COMMON_OBS): Add break-catch-sig.o.
7500
7501 2013-01-16  Tom Tromey  <tromey@redhat.com>
7502
7503         * breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
7504         (print_one_catch_solib, print_one_catch_syscall)
7505         (print_one_catch_exec, print_one_exception_catchpoint): Emit
7506         "catch-type".
7507
7508 2013-01-16  Yao Qi  <yao@codesourcery.com>
7509
7510         * printcmd.c (current_display_number): Make it static.
7511
7512 2013-01-16  Yao Qi  <yao@codesourcery.com>
7513
7514         * infcmd.c (step_once): Don't check '!single_inst' as it was
7515         checked before.
7516
7517 2013-01-15  Jan Kratochvil  <jan.kratochvil@redhat.com>
7518
7519         * dwarf2read.c (psymtab_include_file_name): Extend the function comment.
7520
7521 2013-01-14  Tom Tromey  <tromey@redhat.com>
7522
7523         * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
7524         set command.
7525         * command.h (add_setshow_string_noescape_cmd): Update.
7526         * corefile.c (set_gnutarget_command): Remove trailing whitespace.
7527         (complete_set_gnutarget): New function.
7528         (_initialize_core): Set the "set gnutarget" completer.
7529
7530 2013-01-14  Tom Tromey  <tromey@redhat.com>
7531
7532         PR symtab/14442:
7533         * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
7534         (c_type_print_modifier): Likewise.
7535         * dwarf2read.c (read_tag_restrict_type): New function.
7536         (read_type_die_1): Handle DW_TAG_restrict_type.
7537         * gdbtypes.c (make_restrict_type): New function.
7538         (recursive_dump_type): Handle TYPE_RESTRICT.
7539         * gdbtypes.h (enum type_flag_values): Renumber.
7540         (enum type_instance_flag_value): Add
7541         TYPE_INSTANCE_FLAG_RESTRICT.
7542         (TYPE_RESTRICT): New macro.
7543         (make_restrict_type): Declare.
7544
7545 2013-01-14  Tom Tromey  <tromey@redhat.com>
7546
7547         PR symtab/14931:
7548         * psymtab.c (struct psymtab_state): New.
7549         (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
7550         functions.
7551         * psympriv.h (make_cleanup_discard_psymtabs): Declare.
7552         * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
7553
7554 2013-01-14  Richard Sharman  <richard_sharman@mitel.com>
7555             Pedro Alves  <palves@redhat.com>
7556
7557         PR remote/14786
7558
7559         * remote.c (remote_threads_info): Make a copy of the reply from
7560         qfThreadInfo and use that instead of rs->buf.
7561
7562 2013-01-14  Yao Qi  <yao@codesourcery.com>
7563
7564         * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
7565         (dbx_psymtab_to_symtab): Likewise.
7566         * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
7567         * mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
7568         * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
7569
7570 2013-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
7571
7572         * parse.c (parse_exp_in_context): New variable inner_chain.  Call
7573         make_cleanup_restore_current_language.  Call set_language.  Move
7574         OLD_CHAIN and INNER_CHAIN cleanups.
7575         * utils.c (do_restore_current_language)
7576         (make_cleanup_restore_current_language): New functions.
7577         * utils.h (make_cleanup_restore_current_language): New declaration.
7578
7579 2013-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
7580
7581         * source.c (symtab_to_fullname): Apply rewrite_source_path also for
7582         non-existing files.
7583
7584         * source.c (symtab_to_fullname): Do not prepend DIRNAME for
7585         non-existing files if FILENAME is already absolute.
7586
7587 2013-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
7588
7589         * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
7590         fputs_filtered.  Append trailing newline.
7591
7592 2013-01-11  Yao Qi  <yao@codesourcery.com>
7593             Stan Shebs  <stan@codesourcery.com>
7594
7595         * psymtab.c (init_psymbol_list): Clarify the comment.
7596
7597 2013-01-11  Yao Qi  <yao@codesourcery.com>
7598
7599         * breakpoint.c (print_one_breakpoint_location): Remove dead code.
7600         (update_dprintf_command_list): Assert that 'printf_line' is
7601         non-null.  Remove condition check.
7602
7603 2013-01-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
7604
7605         Code cleanup.
7606         * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
7607         type const char *.
7608         * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
7609         const char *.
7610         * tui/tui-source.h (tui_source_is_displayed): Likewise.
7611
7612 2013-01-09  Anthony Green  <green@moxielogic.com>
7613
7614         * cp-abi.c (cplus_print_vtable): Don't return value from void
7615         function.
7616         * ada-lang.c (re_set_catch_assert): Ditto.
7617
7618 2013-01-09  Doug Evans  <dje@google.com>
7619
7620         * symfile.h (quick_symbol_functions): Delete member
7621         pre_expand_symtabs_matching.  All uses removed.
7622         * dwarf2read.c (dw2_lookup_symbol): Implement.
7623         (dw2_do_expand_symtabs_matching): Delete.
7624         (dw2_pre_expand_symtabs_matching): Delete.
7625         (struct dw2_symtab_iterator): New type.
7626         (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
7627         (dw2_expand_symtabs_for_function): Rewrite.
7628         (dwarf2_gdb_index_functions): Update.
7629         * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
7630         (psym_functions): Update.
7631
7632 2013-01-09  Tom Tromey  <tromey@redhat.com>
7633
7634         * config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
7635         * configure: Rebuild.
7636         * configure.ac: Add somread.o to the build if BFD has SOM
7637         support.
7638         * somread.c: Include som/aout.h, not syms.h.
7639         (som_symtab_read): Use som_external_symbol_dictionary_record.
7640         Unpack records manually.
7641         (_initialize_somread): Declare.
7642
7643 2012-01-08  Mike Frysinger  <vapier@gentoo.org>
7644
7645         * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
7646         Cast return_address to 64bits.
7647
7648 2013-01-08  Hui Zhu  <hui_zhu@mentor.com>
7649
7650         * printcmd.c: Remove define of function output_command.
7651         * tracepoint.c: Remove extern of function output_command.
7652         * valprint.h: (output_command): New extern.
7653
7654 2013-01-07  Tom Tromey  <tromey@redhat.com>
7655
7656         * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
7657         Remove.
7658         (objc_language_defn): Use c_printchar, c_printstr,
7659         c_emit_char.
7660
7661 2013-01-07  Tom Tromey  <tromey@redhat.com>
7662
7663         PR cli/7719:
7664         * NEWS: Update.
7665         * ada-valprint.c (printstr, print_field_values): Remove
7666         "inspect_it" code.
7667         * cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
7668         code.
7669         * jv-valprint.c (java_print_value_fields): Remove "inspect_it"
7670         code.
7671         * m2-lang.c (m2_printstr): Remove "inspect_it" code.
7672         * main.c (captured_main): Remove "epoch" argument.
7673         * objc-lang.c (objc_printstr): Remove "inspect_it" code.
7674         * p-lang.c (pascal_printstr): Remove "inspect_it" code.
7675         * p-valprint.c (pascal_object_print_value_fields): Remove
7676         "inspect_it" code.
7677         * printcmd.c (print_command_1): Remove 'inspect' argument.
7678         (print_command, call_command): Update.
7679         (inspect_command): Remove.
7680         (_initialize_printcmd): Make "inspect" an alias for "print".
7681         * top.c (epoch_interface): Remove.
7682         * top.h (epoch_interface): Remove.
7683         * valprint.c (user_print_options): Update.
7684         (print_converted_chars_to_obstack): Remove "inspect_it" code.
7685         * valprint.h (struct value_print_options) <inspect_it>: Remove
7686         field.
7687
7688 2013-01-04  Tom Tromey  <tromey@redhat.com>
7689
7690         * valprint.h (read_string): Add 'extern'.
7691
7692 2013-01-07  Joel Brobecker  <brobecker@adacore.com>
7693
7694         * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
7695         used to decide whether to define darwin_read_dyld_info or not.
7696
7697 2013-01-03  Pierre Muller  <muller@sourceware.org>
7698
7699         * main.c (relocate_gdb_directory): Avoid calling stat function
7700         if DIR is empty.
7701
7702 2013-01-03  Yao Qi  <yao@codesourcery.com>
7703
7704         * psymtab.c (fixup_psymbol_section): Update declaration.
7705         (fixup_psymbol_section): Remove code returning value.
7706
7707 2013-01-03  Yao Qi  <yao@codesourcery.com>
7708
7709         * symtab.h: Remove some out of date comments.
7710          (enum exception_event_kind): Move it ...
7711         * breakpoint.c: ... here.
7712
7713 2013-01-02  Iain Sandoe  <developer@sandoe-acoustics.co.uk>
7714
7715         PR gdb/14405
7716         * darwin-nat.c (darwin_read_dyld_info): Only build if
7717         TASK_DYLD_INFO_COUNT is defined.
7718         (darwin_xfer_partial): Call darwin_read_dyld_info only if
7719         TASK_DYLD_INFO_COUNT is defined.
7720
7721 2013-01-02  Tom Tromey  <tromey@redhat.com>
7722
7723         * symfile.h (struct ecoff_debug_hack): Remove.
7724         * objfiles.c: Don't include mdebugread.h.
7725
7726 2013-01-02  Tom Tromey  <tromey@redhat.com>
7727
7728         * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
7729         * configure.ac: Check for Mach-O support in BFD.  Update
7730         CONFIG_OBS.
7731         * configure: Rebuild.
7732
7733 2013-01-02  Tom Tromey  <tromey@redhat.com>
7734
7735         * acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
7736         * configure.ac: Use GDB_AC_CHECK_BFD.
7737         * configure: Rebuild.
7738
7739 2013-01-01  Maxim Kuvyrkov  <maxim.kuvyrkov@gmail.com>
7740
7741         * MAINTAINERS: Update my email.
7742
7743 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
7744
7745         * cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
7746
7747 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
7748
7749         * rs6000-nat.c (bss_data_overlap): New function.
7750         (vmap_symtab): Use it to adjust the .bss section's offset.
7751
7752 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
7753
7754         Update year range in copyright notice of all files.
7755
7756 2013-01-01, 13  Joel Brobecker  <brobecker@adacore.com>
7757
7758         * top.c (print_gdb_version): Update copyright year.
7759
7760 For older changes see ChangeLog-2012.
7761 \f
7762 Local Variables:
7763 mode: change-log
7764 left-margin: 8
7765 fill-column: 74
7766 version-control: never
7767 coding: utf-8
7768 End: