1 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
4 * frame.c (select_frame): Remove reference to
5 deprecated_selected_frame_level_changed_hook.
6 * frame.h (deprecated_selected_frame_level_changed_hook): Remove
8 * stack.c (deprecated_selected_frame_level_changed_hook):
10 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook):
12 (tui_refresh_frame_and_register_information): ... this. Bail
13 out if there is no stack. Don't update register information
14 unless registers_too_p is true.
15 (tui_print_frame_info_listing_hook): Rename to ...
16 (tui_dummy_print_frame_info_listing_hook): ... this.
17 (tui_before_prompt): New function.
18 (tui_normal_stop): New function.
19 (tui_before_prompt_observer): New observer.
20 (tui_normal_stop_observer): New observer.
21 (tui_install_hooks): Set
22 deprecated_print_frame_info_listing_hook to
23 tui_dummy_print_frame_info_listing_hook. Register
24 tui_before_prompt_observer to call tui_before_prompt and
25 tui_normal_stop_observer to call tui_normal_stop. Remove
26 reference to deprecated_selected_frame_level_changed_hook.
27 (tui_remove_hooks): Detach and unset tui_before_prompt_observer
28 and tui_normal_stop_observer. Remove reference to
29 deprecated_selected_frame_level_changed_hook.
31 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
34 * tui/tui-stack.c (tui_set_locator_info): Change prototype to
35 return an int instead of void. Return whether the locator
37 (tui_show_frame_info): If the locator info has not changed, then
38 bail out early to avoid refreshing the windows.
40 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
42 * tui/tui-stack.c (tui_set_locator_info): Explicitly pass
43 LOCATOR_WIN to tui_alloc_content.
45 2015-06-30 Yao Qi <yao.qi@linaro.org>
48 * arm-tdep.c (arm_get_next_pc_raw): Break for media
51 2015-06-29 Kevin Buettner <kevinb@redhat.com>
53 * rx-tdep.c (RX_PSW_REGNUM): New enum constant.
54 (rx_dwarf_reg_to_regnum): New function.
55 (rx_gdbarch_init): Register rx_dwarf_reg_to_regnum. Use dwarf2
58 2015-06-29 Pedro Alves <palves@redhat.com>
61 * infcall.c (run_inferior_call): On infcall success, if the thread
62 was marked stopped before, reset it back to stopped.
63 * infrun.c (resume): Don't suppress the set_running calls when
65 (normal_stop): Only discard the finish_thread_state cleanup if the
68 2015-06-29 Pierre Langlois <pierre.langlois@arm.com>
70 * MAINTAINERS (Write After Approval): Update my email address.
72 2015-06-26 Keith Seitz <keiths@redhat.com>
73 Doug Evans <dje@google.com>
76 * block.c (block_lookup_symbol): For non-function blocks,
77 continue to search for a symbol with an exact domain match
78 Otherwise, return any previously found "best domain" symbol.
79 (block_lookup_symbol_primary): Likewise.
81 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
83 * NEWS: Mention the new option "history remove-duplicates".
84 * top.c (history_remove_duplicates): New static variable.
85 (show_history_remove_duplicates): New static function.
86 (gdb_add_history): Conditionally remove duplicate history
88 (init_main): Add "history remove-duplicates" option.
90 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
92 * tui/tui-win.c (focus_completer): New static function.
93 (_initialize_tui_win): Set the completion function of the
94 "focus" command to focus_completer.
96 2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
98 * linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
100 * symtab.c (find_function_start_sal): Likewise.
102 2015-06-25 Gary Benson <gbenson@redhat.com>
104 * solib.c (solib_find_1): Set local variable sysroot to NULL if
105 it is the empty string after trailing slashes have been stripped.
107 2015-06-25 Gary Benson <gbenson@redhat.com>
109 * exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
110 * infrun.c (follow_exec): Likewise.
111 * remote.c (remote_filesystem_is_local): Likewise.
112 * solib.c (solib_find_1): Likewise.
114 2015-06-24 Keith Seitz <keiths@redhat.com>
116 * build-id.c (build_id_to_debug_bfd): Add cleanup to free
117 return value from lrealpath.
119 2015-06-24 Mike Frysinger <vapier@gentoo.org>
121 * remote-sim.c (gdbsim_open): Move sysroot update to the top.
123 2015-06-24 Mike Frysinger <vapier@gentoo.org>
125 * remote-sim.c: Include gdb_bfd.h.
126 (gdbsim_open): Declare new local sysroot pointing to gdb_sysroot.
127 Skip TARGET_SYSROOT_PREFIX in gdb_sysroot when it is active.
129 2015-06-24 Yao Qi <yao.qi@linaro.org>
131 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
132 set_gdbarch_get_siginfo_type.
133 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
134 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
135 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
136 * m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
137 * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
138 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
139 * tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
140 * linux-tdep.c (linux_get_siginfo_type): Change it to static.
141 (linux_init_abi): Call set_gdbarch_get_siginfo_type.
142 * linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
144 2015-06-24 Gary Benson <gbenson@redhat.com>
146 * common/buffer.c (stdint.h): Do not include.
147 * common/print-utils.c (stdint.h): Likewise.
148 * compile/compile-c-symbols.c (gdb_assert.h): Likewise.
149 * compile/compile-c-types.c (gdb_assert.h): Likewise.
150 * ft32-tdep.c (gdb_assert.h): Likewise.
151 * guile/scm-utils.c (stdint.h): Likewise.
152 * i386-linux-tdep.c (stdint.h): Likewise.
153 * i386-tdep.c (stdint.h): Likewise.
154 * nat/linux-btrace.c (stdint.h): Likewise.
155 * nat/linux-btrace.h (stdint.h): Likewise.
156 * nat/linux-ptrace.c (stdint.h): Likewise.
157 * nat/mips-linux-watch.h (stdint.h): Likewise.
158 * ppc-linux-nat.c (stdint.h): Likewise.
159 * python/python-internal.h (stdint.h): Likewise.
160 * stub-termcap.c (stdlib.h): Likewise.
161 * target/target.h (stdint.h): Likewise.
162 * xtensa-linux-nat.c (stdint.h): Likewise.
164 2015-06-23 Patrick Palka <patrick@parcs.ath.cx>
166 * top.c (init_history): Look at errno after calling strtol to
167 properly map large GDBHISTSIZE values to infinity.
169 2015-06-23 Doug Evans <dje@google.com>
171 * inferior.h (struct inferior_suspend_state): Delete, unused.
172 All references deleted.
174 2015-06-23 Mike Frysinger <vapier@gentoo.org>
176 * microblaze-tdep.c (microblaze_push_dummy_code): Delete.
177 (microblaze_push_dummy_call): Likewise.
178 (microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
179 and set_gdbarch_push_dummy_call.
181 2015-06-23 Yao Qi <yao.qi@linaro.org>
183 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
184 Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
185 (amd64_linux_store_inferior_registers): Likewise.
186 * arm-linux-nat.c (fetch_fpregister): Likewise.
187 (fetch_fpregs, store_fpregister): Likewise.
188 (store_fpregister, store_fpregs): Likewise.
189 (fetch_register, fetch_regs): Likewise.
190 (store_register, store_regs): Likewise.
191 (fetch_vfp_regs, store_vfp_regs): Likewise.
192 (arm_linux_read_description): Check have_ptrace_getregset is
193 TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
195 * i386-linux-nat.c (fetch_xstateregs): Check
196 have_ptrace_getregset is not TRIBOOL_TRUE.
197 (store_xstateregs): Likewise.
198 * linux-nat.c (have_ptrace_getregset): Change its type to
200 * linux-nat.h (tribool): New enum.
201 * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
202 Check whether have_ptrace_getregset is TRIBOOL_TRUE.
204 2015-06-19 Doug Evans <dje@google.com>
206 * NEWS: Mention Sun's version of stabs is no longer supported.
207 * elfread.c (free_elfinfo): Delete. All uses updated.
208 (elfstab_offset_sections): Delete. All uses updated.
209 * gdb-stabs.h (stab_section_info): Delete. All uses updated.
210 * psympriv.h (partial_symtab) <section_offsets>: Delete.
212 * psymtab.c (start_psymtab_common): Delete arg section_offsets.
215 2015-06-18 Simon Marchi <simon.marchi@ericsson.com>
217 * common/rsp-low.c (needs_escaping): New.
218 (remote_escape_output): Add unit_size parameter. Refactor to
219 support multi-byte addressable units. Rename parameters.
220 * common/rsp-low.h (remote_escape_output): Add unit_size
221 parameter and rename others. Update doc.
222 * remote.c (align_for_efficient_write): New.
223 (remote_write_bytes_aux): Add unit_size parameter and use it.
224 Rename some variables. Update doc.
225 (remote_xfer_partial): Get unit size and use it.
226 (remote_read_bytes_1): Add unit_size parameter and use it.
227 Rename some variables. Update doc.
228 (remote_write_bytes): Same.
229 (remote_xfer_live_readonly_partial): Same.
230 (remote_read_bytes): Same.
231 (remote_flash_write): Update call to remote_write_bytes_aux.
232 (remote_write_qxfer): Update call to remote_escape_output.
233 (remote_search_memory): Same.
234 (remote_hostio_pwrite): Same.
236 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
238 * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
239 locations as inserted.
240 Update and expand comment about permanent locations.
241 (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
242 Move comment to add_location_to_breakpoint.
243 (update_global_location_list): Don't error out if a permanent
244 breakpoint is not marked inserted.
245 Don't error out if a non-permanent breakpoint location is inserted on
246 top of a permanent breakpoint.
248 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
250 * breakpoint.c (make_breakpoint_permanent): Remove unused
252 * breakpoint.h (make_breakpoint_permanent): Remove declaration.
254 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
257 * NEWS: Mention new GDBHISTSIZE behavior.
258 * top.c (init_history): For null or out-of-range GDBHISTSIZE,
259 set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
261 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
263 * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
264 * top.c (init_history): Read from GDBHISTSIZE instead of
266 (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
268 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
270 * top.c (gdb_safe_append_history): Do not call
271 history_truncate_file if the history is not stifled.
273 2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
275 * syscalls/s390-linux.xml: Add syscalls 344 through 354.
276 * syscalls/s390x-linux.xml: Likewise.
278 2015-06-16 Michael Eager <eager@eagercon.com>
280 * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
282 2015-06-16 Patrick Palka <patrick@parcs.ath.cx>
284 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
285 target_terminal_ours_for_output() before calling
286 tui_show_frame_info(), and restore the original terminal
289 2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
291 * arm-linux-nat.c: Include nat/linux-ptrace.h.
293 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
295 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
297 (mi_cmd_data_write_memory_bytes): Same.
299 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
301 * corefile.c (write_memory): Update doc.
302 * gdbcore.h (write_memory): Same.
304 2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
306 * linux-tdep.c (enum filterflags): Make it from anonymous enum.
307 (dump_mapping_p): Use it for parameter filterflags.
308 (linux_find_memory_regions_full): Use it for variable filterflags.
310 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
311 Jan Kratochvil <jan.kratochvil@redhat.com>
313 Merge multiple hex conversions.
314 * monitor.c: Include rsp-low.h.
315 (fromhex): Remove definition.
317 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
318 Jan Kratochvil <jan.kratochvil@redhat.com>
320 Move utility functions to common/.
321 * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
322 Move defs to common/common-utils.c.
323 * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
324 (skip_to_space_const): Move decls to common/common-utils.h.
325 * common/common-defs.h: Move include of common-types.h before
327 * common/common-utils.c: Include host-defs.h and ctype.h.
328 (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
330 (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
332 * common/common-utils.h (strtoulst): Move decl from utils.h.
333 (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
334 Move from cli/cli-utils.h.
335 * common/host-defs.h: Include limits.h.
336 (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
337 (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
338 * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
339 common/common-utils.h.
340 * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
341 (strtoulst): Move to common/common-utils.c.
342 * utils.h (strtoulst): Moved decl to common/common-utils.h.
344 2015-06-15 Yao Qi <yao.qi@linaro.org>
346 * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
348 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
350 * build-id.c: Don't include elf-bfd.h.
351 (build_id_bfd_get): Use bfd_build_id.
352 (build_id_verify): Ditto.
354 (find_separate_debug_file_by_buildid): Ditto.
355 * python/py-objfile.c: Don't include elf-bfd.h.
356 (objfpy_get_build_id) Use bfd_build_id.
357 (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
358 * coffread.c: Include build-id.h.
359 (coff_symfile_read): Try find_separate_debug_file_by_buildid.
361 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
363 * windows-nat.c (do_windows_fetch_inferior_registers)
364 (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
365 conditional with __CYGWIN__.
367 2015-06-13 Andrew Burgess <andrew.burgess@embecosm.com>
369 * completer.c: Add arch-utils.h include.
370 (enum reg_completer_targets): New enum.
371 (reg_or_group_completer_1): New function containing old
372 reg_or_group_completer, add and use new parameter to control what
373 is completed on. Use get_current_arch rather than architecture of
374 currently selected frame.
375 (reg_or_group_completer): Call new reg_or_group_completer_1.
376 (reggroup_completer): Call new reg_or_group_completer_1.
377 * completer.h (reggroup_completer): Add declaration.
378 * tui/tui-regs.c: Add 'completer.h' include.
379 (tui_reg_next_command): Renamed to...
380 (tui_reg_next): ...this. Adjust parameters and return rather than
382 (tui_reg_prev_command): Renamed to...
383 (tui_reg_prev): ...this. Adjust parameters and return rather than
385 (tui_reg_float_command): Delete.
386 (tui_reg_general_command): Delete.
387 (tui_reg_system_command): Delete.
388 (tui_reg_command): Rewrite to perform switching of register group.
390 (tuireglist): Remove.
391 (tui_reggroup_completer): New function.
392 (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
393 creation of 'tui reg' command.
394 * NEWS: Add comment about 'tui reg' changes.
396 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
398 * target.c (target_read): Consider addressable unit size when
399 reading from a memory object.
400 (read_memory_robust): Same.
401 (read_whatever_is_readable): Same.
402 (target_write_with_progress): Consider addressable unit size
403 when writing to a memory object.
404 * target.h (target_read): Update documentation.
405 (target_write): Add documentation.
407 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
409 * arch-utils.h (default_addressable_memory_unit_size): New.
410 * arch-utils.c (default_addressable_memory_unit_size): New.
411 * gdbarch.sh (addressable_memory_unit_size): New.
412 * gdbarch.h: Re-generate.
413 * gdbarch.c: Re-generate.
415 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
417 * target.c (target_read): Rename variables and use
419 (target_read_with_progress): Same.
420 (read_memory_robust): Constify parameters and rename
422 (read_whatever_is_readable): Constify parameters,
423 rename variables, adjust formatting.
424 * target.h (read_memory_robust): Constify parameters.
426 2015-06-12 Ulrich Weigand <uweigand@de.ibm.com>
428 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
429 synthetic (non-AltiVec) vector types.
430 (ppc64_sysv_abi_return_value): Likewise.
432 2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
435 * breakpoint.c (create_breakpoint): Save extra_string for
438 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
440 * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
441 and bt_mask to CORE_ADDR.
443 2015-06-11 Gary Benson <gbenson@redhat.com>
445 * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
446 (mnsh_recv_message): Likewise.
448 2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
450 * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
451 long long int and plongest instead of %ll.
453 2015-06-11 Gary Benson <gbenson@redhat.com>
455 * nat/linux-namespaces.c (gdb_wait.h): New include.
456 (sys/wait.h): Do not include.
458 2015-06-10 Simon Marchi <simon.marchi@ericsson.com>
460 * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
461 end_sequence is true.
463 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
466 * solib-target.c (library_list_start_list): Use explicit NULL
469 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
471 * solib-target.c (library_list_start_list): Do not dereference
472 variable version in its initialization. Make the VERSION check handle
474 (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
476 2015-06-10 Gary Benson <gbenson@redhat.com>
478 * NEWS: Announce support for direct access of executable and
479 shared library files when attaching to inferiors in containers
480 on GNU/Linux systems.
482 2015-06-10 Gary Benson <gbenson@redhat.com>
484 * remote.c (struct remote_state) <fs_pid>: New field.
485 (new_remote_state): Initialize the above.
486 (PACKET_vFile_setfs): New enum value.
487 (remote_hostio_set_filesystem): New function.
488 (remote_hostio_open): Call the above.
489 (remote_hostio_unlink): Likewise.
490 (remote_hostio_readlink): Likewise.
491 (_initialize_remote): Register new "set/show remote
492 hostio-setfs-packet" command.
493 * NEWS: Announce new vFile:setfs packet.
495 2015-06-10 Gary Benson <gbenson@redhat.com>
497 * linux-nat.c (nat/linux-namespaces.h): New include.
498 (fileio.h): Likewise.
499 (linux_nat_filesystem_is_local): New function.
500 (linux_nat_fileio_pid_of): Likewise.
501 (linux_nat_fileio_open): Likewise.
502 (linux_nat_fileio_readlink): Likewise.
503 (linux_nat_fileio_unlink): Likewise.
504 (linux_nat_add_target): Initialize to_filesystem_is_local,
505 to_fileio_open, to_fileio_readlink and to_fileio_unlink.
506 (_initialize_linux_nat): New "set/show debug linux-namespaces"
508 * NEWS: Mention new "set/show debug linux-namespaces" commands.
510 2015-06-10 Gary Benson <gbenson@redhat.com>
512 * target.h (struct inferior): New forward declaration.
513 (struct target_ops) <to_filesystem_is_local>: Update comment.
514 (struct target_ops) <to_fileio_open>: New argument inf.
515 Update comment. All implementations updated.
516 (struct target_ops) <to_fileio_unlink>: Likewise.
517 (struct target_ops) <to_fileio_readlink>: Likewise.
518 (target_filesystem_is_local): Update comment.
519 (target_fileio_open): New argument inf. Update comment.
520 (target_fileio_unlink): Likewise.
521 (target_fileio_readlink): Likewise.
522 (target_fileio_read_alloc): Likewise.
523 (target_fileio_read_stralloc): Likewise.
524 * target.c (target_fileio_open): New argument inf.
525 Pass inf to implementation. Update debug printing.
526 (target_fileio_unlink): Likewise.
527 (target_fileio_readlink): Likewise.
528 (target_fileio_read_alloc_1): New argument inf. Pass inf
529 to target_fileio_open.
530 (target_fileio_read_alloc): New argument inf. Pass inf to
531 target_fileio_read_alloc_1.
532 (target_fileio_read_stralloc): Likewise.
533 * gdb_bfd.c (inferior.h): New include.
534 (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
535 argument with new argument "inferior". Pass inferior to
537 (gdb_bfd_open): Supply inferior argument to
538 gdb_bfd_iovec_fileio_open.
539 * linux-tdep.c (linux_info_proc): Supply inf argument to
540 relevant target_fileio calls.
541 (linux_find_memory_regions_full): Likewise.
542 (linux_fill_prpsinfo): Likewise.
543 * remote.c (remote_filesystem_is_local): Supply inf
544 argument to remote_hostio_open.
545 (remote_file_put): Likewise.
546 (remote_file_get): Likewise.
547 (remote_file_delete): Supply inf argument to
548 remote_hostio_unlink.
550 2015-06-10 Gary Benson <gbenson@redhat.com>
552 * inf-child.c (inf_child_fileio_open): Replace comment.
553 (inf_child_fileio_pwrite): Likewise.
554 (inf_child_fileio_pread): Likewise.
555 (inf_child_fileio_fstat): Insert blank line before comment.
556 (inf_child_fileio_close): Replace comment.
557 (inf_child_fileio_unlink): Likewise.
558 (inf_child_fileio_readlink): Likewise.
559 * remote.c (remote_hostio_open): Likewise.
560 (remote_hostio_pread): Likewise.
561 (remote_hostio_pwrite): Likewise.
562 (remote_hostio_close): Likewise.
563 (remote_hostio_unlink): Likewise.
564 (remote_hostio_readlink): Likewise.
565 (remote_hostio_fstat): Likewise.
566 (remote_filesystem_is_local): Likewise.
567 * target.c (target_fileio_open): Likewise.
568 (target_fileio_pwrite): Likewise.
569 (target_fileio_pread): Likewise.
570 (target_fileio_fstat): Insert blank line before comment.
571 (target_fileio_close): Replace comment.
572 (target_fileio_unlink): Likewise.
573 (target_fileio_readlink): Likewise.
574 (target_fileio_read_alloc): Likewise.
575 (target_fileio_read_stralloc): Likewise.
577 2015-06-10 Gary Benson <gbenson@redhat.com>
579 * linux-thread-db.c (nat/linux-namespaces.h): New include.
580 (check_pid_namespace_match): Use linux_ns_same rather than
581 linux_proc_pid_get_ns to spot PID namespace mismatches.
582 * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
583 * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
585 2015-06-10 Gary Benson <gbenson@redhat.com>
587 * configure.ac (AC_CHECK_FUNCS): Add setns.
588 * config.in: Regenerate.
589 * configure: Likewise.
590 * nat/linux-namespaces.h: New file.
591 * nat/linux-namespaces.c: Likewise.
592 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
593 (linux-namespaces.o): New rule.
594 * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
595 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
596 * config/arm/linux.mh (NATDEPFILES): Likewise.
597 * config/i386/linux.mh (NATDEPFILES): Likewise.
598 * config/i386/linux64.mh (NATDEPFILES): Likewise.
599 * config/ia64/linux.mh (NATDEPFILES): Likewise.
600 * config/m32r/linux.mh (NATDEPFILES): Likewise.
601 * config/m68k/linux.mh (NATDEPFILES): Likewise.
602 * config/mips/linux.mh (NATDEPFILES): Likewise.
603 * config/pa/linux.mh (NATDEPFILES): Likewise.
604 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
605 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
606 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
607 * config/s390/linux.mh (NATDEPFILES): Likewise.
608 * config/sparc/linux.mh (NATDEPFILES): Likewise.
609 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
610 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
611 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
613 2015-06-10 Gary Benson <gbenson@redhat.com>
615 * utils.h (make_cleanup_close): Moved to common/filestuff.h.
616 * utils.c (do_close_cleanup): Moved to common/filestuff.c.
617 (make_cleanup_close): Likewise.
618 * common/filestuff.h (make_cleanup_close): Moved from utils.h.
619 * common/filestuff.c (do_close_cleanup): Moved from utils.c.
620 (make_cleanup_close): Likewise.
622 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
624 * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
625 from SuspendThread().
627 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
629 * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
630 from OutputDebugString.
632 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
633 Mircea Gherzan <mircea.gherzan@intel.com>
635 * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
636 MPX_BT_MASK_32): New macros.
637 (i386_mpx_set_bounds): New function that implements
638 the command "set-mpx-bound".
639 (i386_mpx_enabled): Helper function to test MPX availability.
640 (i386_mpx_bd_base): Helper function to calculate the base directory
642 (i386_mpx_get_bt_entry): Helper function to access a bound
644 (i386_mpx_print_bounds): Effectively display bound information.
645 (_initialize_i386_tdep): Add new commands to commands "set mpx" and
647 (_initialize_i386_tdep):
648 Add "bound" to the commands "show mpx" and "set mpx" commands.
649 (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
650 and "show mpx" commands.
651 * NEWS: List new commands for MPX support.
653 2015-06-09 Gary Benson <gbenson@redhat.com>
655 * common/fileio.h (fileio_to_host_mode): New declaration.
656 * common/fileio.c (fileio_to_host_mode): New Function.
657 * inf-child.c (inf_child_fileio_open): Process mode argument
658 with fileio_to_host_mode.
660 2015-06-09 Gary Benson <gbenson@redhat.com>
662 * common/fileio.c (fileio_mode_pack): Fix preprocessor
665 2015-06-05 Gary Benson <gbenson@redhat.com>
667 * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
668 * remote.c (remote_filesystem_is_local): ...here.
670 2015-06-04 Yao Qi <yao.qi@linaro.org>
672 * gdbarch.c: Regenerate it.
674 2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
676 * arch-utils.c (default_infcall_munmap): New.
677 * arch-utils.h (default_infcall_munmap): New declaration.
678 * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
679 (munmap_list_free, munmap_listp_free_cleanup): New.
680 (struct setup_sections_data): Add field munmap_list_headp.
681 (setup_sections): Call munmap_list_add.
682 (compile_object_load): New variable munmap_list_head, initialize
683 setup_sections_data.munmap_list_headp, return munmap_list_head.
684 * compile/compile-object-load.h (struct munmap_list): New declaration.
685 (struct compile_module): Add field munmap_list_head.
686 (munmap_list_free): New declaration.
687 * compile/compile-object-run.c (struct do_module_cleanup): Add field
689 (do_module_cleanup): Call munmap_list_free.
690 (compile_object_run): Pass munmap_list_head to do_module_cleanup.
691 * gdbarch.c: Regenerate.
692 * gdbarch.h: Regenerate.
693 * gdbarch.sh (infcall_munmap): New.
694 * linux-tdep.c (linux_infcall_munmap): New.
695 (linux_init_abi): Install it.
697 2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
700 * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
702 2015-06-02 Yao Qi <yao.qi@linaro.org>
704 * i386-linux-nat.c: Include linux-nat.h.
706 2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
707 Jan Kratochvil <jan.kratochvil@redhat.com>
710 * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
712 * dwarf2loc.c (chain_candidate): Likewise.
714 2015-06-01 Yao Qi <yao.qi@linaro.org>
716 * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
717 (store_vfp_regs): Use PTRACE_SETREGSET.
719 2015-06-01 Yao Qi <yao.qi@linaro.org>
721 * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
722 (fetch_fpregs): Likewise.
723 * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
724 (store_fpregs): Likewise.
726 2015-06-01 Yao Qi <yao.qi@linaro.org>
728 * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
729 (fetch_regs): Likewise.
730 (store_regs): Use PTRACE_SETREGSET.
731 (store_register): Likewise.
733 2015-06-01 Yao Qi <yao.qi@linaro.org>
735 * arm-linux-nat.c (arm_linux_read_description): Check whether
736 kernel supports PTRACE_GETREGSET.
738 2015-06-01 Yao Qi <yao.qi@linaro.org>
740 * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
741 * linux-nat.c: ... here.
742 * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
744 * linux-nat.h: ... here.
746 2015-06-01 Yao Qi <yao.qi@linaro.org>
748 * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
749 * i386-linux-nat.c: Likewise.
750 * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
751 * s390-linux-nat.c: Include "nat/linux-ptrace.h".
752 (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
753 * x86-linux-nat.c: Include "nat/linux-ptrace.h".
754 * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
756 2015-05-30 Eli Zaretskii <eliz@gnu.org>
758 * go32-nat.c (go32_xfer_memory): Fix the return value to be
759 compatible to what read_child and write_child return. This
760 unbreaks that DJGPP build of GDB which was broken since v7.7.
762 2015-05-29 Martin Galvan <martin.galvan@tallertechnologies.com>
764 * MAINTAINERS (Write After Approval): Add Martin Galvan.
766 2015-05-29 Roland McGrath <mcgrathr@google.com>
769 * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
770 rather than internal_error for an unrecognized value.
772 2015-05-29 Max Filippov <jcmvbkbc@gmail.com>
774 * xtensa-tdep.c (xtensa_pseudo_register_read)
775 (xtensa_pseudo_register_write): Don't alias last pseudo register
778 2015-05-28 Don Breazeal <donb@codesourcery.com>
780 * infrun.c (follow_fork_inferior): Ensure the use of
781 process-style ptids (pid,0,0) in verbose/debug "Detaching"
784 2015-05-28 Doug Evans <dje@google.com>
786 * dwarf2read.c (record_line_ftype): Remove, duplicate.
788 2015-05-28 Yao Qi <yao.qi@linaro.org>
790 * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
791 (arm_linux_fetch_inferior_registers): Use
792 tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
793 (arm_linux_store_inferior_registers): Likewise.
794 (arm_linux_read_description): Don't set
795 arm_linux_has_wmmx_registers.
796 * arm-tdep.c (arm_gdbarch_init): Set
797 tdep->have_wmmx_registers according target descriptions.
798 * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
801 2015-05-28 Yao Qi <yao.qi@linaro.org>
803 * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
804 (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
805 instead of arm_linux_vfp_register_count.
806 (store_vfp_regs): Likewise.
807 (arm_linux_fetch_inferior_registers): Likewise.
808 (arm_linux_store_inferior_registers): Likewise.
809 (arm_linux_read_description): Don't set
810 arm_linux_vfp_register_count.
811 * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
813 * arm-tdep.c (arm_gdbarch_init): Add assert on
815 * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
816 field to vfp_register_count. All users updated.
818 2015-05-28 Kyle Huey <me@kylehuey.com> (tiny patch)
820 * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
821 ELFOSABI_GNU binaries.
823 2015-05-27 Doug Evans <dje@google.com>
825 * dwarf2read.c (lnp_state_machine): New typedef.
826 (lnp_reader_state): New typedef.
827 (dwarf_record_line_1): Renamed from dwarf_record_line.
829 (dwarf_record_line): New function.
830 (init_lnp_state_machine): New function.
831 (check_line_address): Replace p_record_line parameter with state.
833 (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
834 Update to record state in lnp_state_machine.
836 2015-05-27 Doug Evans <dje@google.com>
838 * dwarf2read.c (record_line_ftype): New typedef.
839 (check_line_address): New function.
840 (dwarf_decode_lines_1): Call it.
842 2015-05-27 Doug Evans <dje@google.com>
844 * NEWS: Mention "set debug dwarf-line".
845 * dwarf2read.c (dwarf_line_debug): New static global.
846 (add_include_dir): Add debug dwarf-line support.
847 (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
848 (_initialize_dwarf2_read): New parameter "debug dwarf-line".
850 2015-05-27 Doug Evans <dje@google.com>
852 * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
854 (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
855 * cp-support.h (cp_lookup_nested_symbol): Update.
857 2015-05-27 Doug Evans <dje@google.com>
860 * block.c (block_find_symbol): New function.
861 (block_find_non_opaque_type): Ditto.
862 (block_find_non_opaque_type_preferred): Ditto.
863 * block.h (block_symbol_matcher_ftype): New typedef.
864 (block_find_symbol): Declare.
865 (block_find_non_opaque_type): Ditto.
866 (block_find_non_opaque_type_preferred): Ditto.
867 * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
868 * psymtab.c (psym_lookup_symbol): Ditto.
869 * symtab.c (basic_lookup_transparent_type_1): New function.
870 (basic_lookup_transparent_type): Call it.
872 2015-05-27 Yao Qi <yao.qi@linaro.org>
874 * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
875 AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
877 2015-05-27 Yao Qi <yao.qi@linaro.org>
879 * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
881 (aarch64_record_load_store): Likewise.
883 2015-05-26 Doug Evans <dje@google.com>
885 PR c++/18141, c++/18417.
886 * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
889 2015-05-26 Doug Evans <dje@google.com>
891 * NEWS: Add entries for command renamings.
892 * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
894 (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated.
895 (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
897 (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
898 All callers updated. Fix spelling of DWARF in help text.
899 (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
901 (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
903 (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated.
904 (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated.
905 (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
907 (show_dwarf_always_disassemble): Renamed from
908 show_dwarf2_always_disassemble. All callers updated.
909 (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
910 "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to
911 "set/show dwarf max-cache-age". Rename
912 "set/show dwarf2 always-disassemble" to
913 "set/show dwarf always-disassemble". Rename
914 "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename
915 "set/show debug dwarf2-die" to "set/show debug dwarf-die".
917 2015-05-26 Doug Evans <dje@google.com>
920 * python/py-lazy-string.c (stpy_convert_to_value): Use
921 gdbpy_gdb_memory_error not PyExc_MemoryError.
922 (gdbpy_create_lazy_string_object): Ditto.
924 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
926 * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
928 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
930 * tui/tui-regs.c (tui_reg_prev_command): New function.
931 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
932 * reggroups.c (reggroup_prev): New function.
933 * reggroups.h (reggroup_prev): Add declaration. Update comment.
935 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
936 Yao Qi <yao.qi@linaro.org>
938 * aarch64-linux-tdep.c: Include linux-record.h and
940 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
941 (aarch64_syscall): New enum.
942 (aarch64_canonicalize_syscall): New function.
943 (aarch64_all_but_pc_registers_record): New function.
944 (aarch64_linux_syscall_record): New function.
945 (aarch64_linux_init_abi): Install AArch64 process record
946 handler. Update to handle syscall recording.
947 * aarch64-tdep.c: Include record.h and record-full.h.
948 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
949 (struct aarch64_mem_r): Define.
950 (aarch64_record_result): New enum.
951 (struct insn_decode_record): Define.
952 (insn_decode_record): New typedef.
953 (aarch64_record_data_proc_reg): New function.
954 (aarch64_record_data_proc_imm): New function.
955 (aarch64_record_branch_except_sys): New function.
956 (aarch64_record_load_store): New function.
957 (aarch64_record_data_proc_simd_fp): New function.
958 (aarch64_record_asimd_load_store): New function.
959 (aarch64_record_decode_insn_handler): New function.
960 (deallocate_reg_mem): New function.
961 (aarch64_process_record): New function.
962 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
964 (aarch64_process_record): New extern declaration.
965 * configure.tgt: Add linux-record.o to gdb_target_obs.
966 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
968 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
970 * NEWS: Add a note on process record-replay support on aarch64*-linux*
973 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
975 * amd64-tdep.c: Replace in_function_epilogue_p with
976 stack_frame_destroyed_p throughout.
977 * arch-utils.c: Ditto.
978 * arch-utils.h: Ditto.
980 * breakpoint.c: Ditto.
982 * hppa-tdep.c: Ditto.
983 * i386-tdep.c: Ditto.
984 * mips-tdep.c: Ditto.
985 * nios2-tdep.c: Ditto.
986 * rs6000-tdep.c: Ditto.
987 * s390-linux-tdep.c: Ditto.
988 * score-tdep.c: Ditto.
990 * sparc-tdep.c: Ditto.
991 * sparc-tdep.h: Ditto.
992 * sparc64-tdep.c: Ditto.
994 * tic6x-tdep.c: Ditto.
995 * tilegx-tdep.c: Ditto.
996 * xstormy16-tdep.c: Ditto.
997 * gdbarch.c, gdbarch.h: Re-generated.
999 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
1001 * NEWS: Mention 'tui enable' and 'tui disable'.
1002 * tui/tui.c (tui_enable_command): New function.
1003 (tui_disable_command): New function.
1004 (_initialize_tui): New function.
1006 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1008 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
1010 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1012 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
1015 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1017 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
1019 (tui_set_layout_for_display_command): ...here, before calling
1020 tui_set_layout. Only set the layout if gdb has not already
1021 entered the TUI_FAILURE state.
1023 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1025 * tui/tui-layout.c (layout_completer): New function.
1026 (_initialize_tui_layout): Set completer on layout command.
1028 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1030 * tui/tui-layout.c (tui_set_layout): Remove
1031 tui_register_display_type parameter. Remove all checking of this
1032 parameter, and reindent function. Update header comment.
1033 (tui_set_layout_for_display_command): Rename to...
1034 (tui_set_layout_by_name): ...this, and don't check for different
1035 register class types, don't pass a tui_register_display_type to
1036 tui_set_layout. Update header comment.
1037 (layout_names): Remove register set specific names.
1038 * tui/tui-layout.h (tui_set_layout): Remove
1039 tui_register_display_type parameter.
1040 * tui/tui.c (tui_rl_change_windows): Don't pass a
1041 tui_register_display_type to tui_set_layout.
1042 (tui_rl_delete_other_windows): Likewise.
1043 (tui_enable): Likewise.
1044 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
1045 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
1046 (TUI_GENERAL_REGS_NAME): Remove.
1047 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
1048 (TUI_SPECIAL_REGS_NAME): Remove.
1049 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
1050 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
1051 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
1052 (enum tui_register_display_type): Remove.
1053 (struct tui_layout_def): Remove regs_display_type and
1054 float_regs_display_type fields.
1055 (struct tui_data_info): Remove regs_display_type field.
1056 (tui_layout_command): Use new name for
1057 tui_set_layout_for_display_command.
1058 * tui/tui-data.c (layout_def): Don't initialise removed fields.
1059 (tui_clear_win_detail): Don't initialise removed fields of
1061 * tui/tui-regs.c (tui_show_registers): Use new name for
1062 tui_set_layout_for_display_command.
1063 * tui/tui.h (tui_set_layout_for_display_command): Rename
1065 (tui_set_layout_by_name): ...this.
1066 * printcmd.c (display_command): Remove tui related layout call,
1069 2015-05-20 Joel Brobecker <brobecker@adacore.com>
1071 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
1072 (handle_inferior_event): New function.
1074 2015-05-20 Joel Brobecker <brobecker@adacore.com>
1076 * ada-lang.c (to_fixed_array_type): Rename local variable
1077 typename into type_name.
1079 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1081 Fix ASAN crash for gdb.compile/compile.exp.
1082 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
1084 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1086 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
1087 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
1088 * compile/compile-object-load.c (setup_sections, compile_object_load):
1090 * compile/compile.c (compile_to_object): Likewise.
1092 2015-05-16 Doug Evans <xdje42@gmail.com>
1094 * NEWS: Mention support for unbuffered Guile memory ports.
1095 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
1096 (ioscm_lseek_address): Improve overflow calculation.
1097 (gdbscm_memory_port_fill_input): Add assert.
1098 (gdbscm_memory_port_write): Handle unbuffered ports.
1099 Handle large writes identical to Guile's fport_write.
1100 (gdbscm_memory_port_seek): Fix seeking past end check.
1101 (gdbscm_memory_port_close): Handle closing unbuffered port.
1102 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
1103 (ioscm_init_memory_port): Handle unbuffered ports.
1104 (ioscm_reinit_memory_port): Ditto.
1105 (ioscm_init_memory_port): Update size calculation.
1106 (gdbscm_open_memory): Support zero sized ports.
1108 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1110 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
1111 variable compiler warnings.
1113 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1115 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
1117 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1118 Phil Muldoon <pmuldoon@redhat.com>
1120 * NEWS (Changes since GDB 7.9): Add compile print.
1121 * compile/compile-c-support.c (add_code_header, add_code_footer)
1122 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
1123 COMPILE_I_PRINT_VALUE_SCOPE.
1124 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
1125 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
1127 * compile/compile-object-load.c: Include block.h.
1128 (get_out_value_type): New function.
1129 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
1130 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
1132 * compile/compile-object-load.h (struct compile_module): Add fields
1133 out_value_addr and out_value_type.
1134 * compile/compile-object-run.c: Include valprint.h and compile.h.
1135 (struct do_module_cleanup): Add fields out_value_addr and
1137 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
1138 COMPILE_I_PRINT_VALUE_SCOPE.
1139 (compile_object_run): Propagate out_value_addr and out_value_type.
1140 Pass OUT_VALUE_ADDR.
1141 * compile/compile.c: Include valprint.h.
1142 (compile_print_value, compile_print_command): New functions.
1143 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
1144 (_initialize_compile): Update compile code help text. Install
1145 compile_print_command.
1146 * compile/compile.h (compile_print_value): New prototype.
1147 * defs.h (enum compile_i_scope_types): Add
1148 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
1150 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1152 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
1153 Rely on its parameter count.
1154 (compile_object_load): Replace lookup_minimal_symbol_text by
1155 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
1157 * compile/compile-object-load.h (struct compile_module): Replace
1158 func_addr by func_sym.
1159 * compile/compile-object-run.c: Include block.h.
1160 (compile_object_run): Reset module variable after it is freed. Use
1161 FUNC_SYM instead of FUNC_ADDR. Rely on it.
1163 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1165 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
1166 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
1167 (c_compute_program): Call generate_register_struct after typedefs.
1168 * compile/compile-loc2c.c (push, pushf_register_address)
1169 (pushf_register): Cast to GCC_UINTPTR.
1170 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
1171 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
1172 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
1173 * compile/compile.c (_initialize_compile): Enable warnings for
1176 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1178 * cli/cli-script.c (execute_control_command): Update
1179 eval_compile_command caller.
1180 * compile/compile-object-load.c (compile_object_load): Add parameters
1181 scope and scope_data. Set them.
1182 * compile/compile-object-load.h (struct compile_module): Add fields
1183 scope and scope_data.
1184 (compile_object_load): Add parameters scope and scope_data.
1185 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
1186 scope and scope_data.
1187 (compile_object_run): Propagate the fields scope and scope_data.
1188 * compile/compile.c (compile_file_command, compile_code_command):
1189 Update eval_compile_command callers.
1190 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
1191 * compile/compile.h (eval_compile_command): Add parameter scope_data.
1192 * defs.h (struct command_line): Add field scope_data.
1194 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1196 * printcmd.c (struct format_data): Move it to valprint.h.
1197 (print_command_parse_format, print_value): New functions from ...
1198 (print_command_1): ... here. Call them.
1199 * valprint.h (struct format_data): Move it here from printcmd.c.
1200 (print_command_parse_format, print_value): New declarations.
1202 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1204 * compile/compile-object-load.c (compile_object_load): Add
1205 COMPILE_DEBUG message.
1207 2015-05-15 Jerome Guitton <guitton@adacore.com>
1209 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
1210 index to get element instead of enum value.
1211 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
1212 of index to compute length, but enum values to compute bounds.
1213 (ada_array_length): Use enum position of index instead of enum value.
1214 (pos_atr): Move position computation to...
1215 (ada_evaluate_subexp): Use enum values to compute bounds.
1216 * gdbtypes.c (discrete_position): ...this new function.
1217 * gdbtypes.h (discrete_position): New function declaration.
1218 * valprint.c (val_print_array_elements): Call discrete_position
1219 to handle array indexed by non-contiguous enumeration types.
1221 2015-05-15 Jerome Guitton <guitton@adacore.com>
1223 * ada-lang.c (find_parallel_type_by_descriptive_type):
1224 Go through typedefs during lookup.
1225 (to_fixed_array_type): Add support for non-bit packed arrays
1226 as variable-length fields.
1228 2015-05-15 Pedro Alves <palves@redhat.com>
1229 Simon Marchi <simon.marchi@ericsson.com>
1231 * event-loop.c (gdb_notifier) <next_file_handler,
1232 next_poll_fds_index>: New fields.
1233 (get_next_file_handler_to_handle_and_advance): New function.
1234 (delete_file_handler): If deleting the next file handler to
1235 handle, advance to the next file handler.
1236 (gdb_wait_for_event): Bail early if no event fired. Poll file
1237 handlers in round-robin fashion.
1239 2015-05-15 Pedro Alves <palves@redhat.com>
1241 * linux-tdep.c (linux_find_memory_regions_full): Rename local
1242 'private' to 'priv'.
1244 2015-05-15 Pedro Alves <palves@redhat.com>
1246 * nat/linux-nat.h: Include "target/waitstatus.h".
1248 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
1250 * python/py-unwind.c (struct reg_info): Move out of ...
1251 (struct cached_frame_info): ... this scope.
1252 (pending_frame_object_type, unwind_info_object_type): Make extern.
1254 2015-05-15 Joel Brobecker <brobecker@adacore.com>
1256 * ada-lang.c (ada_value_primitive_packed_val): Make sure
1257 accumSize is never negative.
1259 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
1261 * tui/tui-command.c: Remove include of <ctype.h>.
1262 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
1264 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
1266 * dwarf2read.c (die_needs_namespace): Return 1 for
1267 DW_TAG_inlined_subroutine.
1269 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1271 * regcache.c (regcache_cpy_no_passthrough): New declaration.
1272 (regcache_cpy_no_passthrough): Make it static, add function comment.
1273 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
1274 (regcache_cpy_no_passthrough): Remove declaration.
1276 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1278 * gdbthread.h (struct thread_control_state): Update comment for
1280 * infcall.c (run_inferior_call): Update comment about
1282 * infcmd.c (get_return_value): Update comment about stop_registers.
1283 (finish_forward): Update comment about proceed_to_finish.
1284 * infrun.c (stop_registers): Remove.
1285 (clear_proceed_status, normal_stop): Remove stop_registers handling.
1286 * infrun.h (stop_registers): Remove.
1288 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1290 * infcall.c (struct dummy_frame_context_saver)
1291 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
1292 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1293 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1295 (call_function_by_hand_dummy): Move discard_cleanups of
1296 inf_status_cleanup before dummy_frame_push. Call
1297 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
1298 Use dummy_frame_context_saver_get_regs instead of stop_registers.
1299 * infcall.h (struct dummy_frame_context_saver)
1300 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1301 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1303 * infcmd.c: Include infcall.h.
1304 (get_return_value): Add parameter ctx_saver, use it instead of
1306 (print_return_value): Add parameter ctx_saver, pass it.
1307 (struct finish_command_continuation_args): Add field ctx_saver.
1308 (finish_command_continuation): Update print_return_value caller.
1309 (finish_command_continuation_free_arg): Free also ctx_saver.
1310 (finish_forward): Call dummy_frame_context_saver_setup.
1311 * inferior.h (struct dummy_frame_context_saver): New declaration.
1312 (get_return_value): Add parameter ctx_saver.
1313 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
1314 get_return_value caller.
1316 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1318 * dummy-frame.c (struct dummy_frame_dtor_list): New.
1319 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
1320 (remove_dummy_frame): Process dtor_list.
1321 (pop_dummy_frame): Process dtor_list.
1322 (register_dummy_frame_dtor): Maintain dtor_list.
1323 (find_dummy_frame_dtor): Handle dtor_list.
1324 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
1327 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1329 * compile/compile-object-run.c (do_module_cleanup): Add parameter
1331 (compile_object_run): Update do_module_cleanup caller.
1332 * dummy-frame.c: Include infcall.h.
1333 (struct dummy_frame): Update dtor comment.
1334 (remove_dummy_frame): Call dtor.
1335 (pop_dummy_frame): Update dtor caller.
1336 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
1339 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1343 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1345 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
1346 Xmethods now being able to specify a result type to that new
1349 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1351 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
1352 first before resizing the window.
1353 * tui/tui.c (tui_enable): Likewise.
1355 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1357 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
1358 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
1359 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
1360 dummy_dtor parameter.
1361 * infcall.h: Include dummy-frame.h.
1362 (call_function_by_hand_dummy_dtor_ftype): Remove.
1363 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
1366 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1369 * top.c (history_size_setshow_var): Change type to signed.
1370 Initialize to -2. Update documentation.
1371 (set_readline_history_size): Define.
1372 (set_history_size_command): Use it. Remove logic for handling
1374 (init_history): Use set_readline_history_size(). Test for a
1375 value of -2 instead of 0 when determining whether to set a
1376 default history size.
1377 (init_main): Decode the argument of the "size" command as a
1378 zuinteger_unlimited.
1380 2015-05-12 Doug Evans <dje@google.com>
1382 * dwarf2read.c (struct file_entry): Tweak comments.
1383 (get_debug_line_section): Tweak comments.
1385 2015-05-12 Don Breazeal <donb@codesourcery.com>
1387 * NEWS: Announce fork support in the RSP and support
1388 for fork debugging in extended mode.
1390 2015-05-12 Don Breazeal <donb@codesourcery.com>
1392 * remote.c (remote_insert_fork_catchpoint): New function.
1393 (remote_remove_fork_catchpoint): New function.
1394 (remote_insert_vfork_catchpoint): New function.
1395 (remote_remove_vfork_catchpoint): New function.
1396 (pending_fork_parent_callback): New function.
1397 (remove_new_fork_child): New function.
1398 (remote_update_thread_list): Call remote_notif_get_pending_events
1399 and remove_new_fork_child.
1400 (extended_remote_kill): Kill fork child when killing the
1401 parent before follow_fork completes.
1402 (init_extended_remote_ops): Initialize target vector with
1403 new fork catchpoint functions.
1405 2015-05-12 Don Breazeal <donb@codesourcery.com>
1407 * remote.c (remove_vfork_event_p): New function.
1408 (remote_follow_fork): Add vfork event type to event checking.
1409 (remote_parse_stop_reply): New stop reasons "vfork" and
1410 "vforkdone" for RSP 'T' Stop Reply Packet.
1412 2015-05-12 Don Breazeal <donb@codesourcery.com>
1414 * linux-nat.c (linux_nat_ptrace_options): New function.
1415 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
1416 Call linux_nat_ptrace_options and use different argument to
1417 linux_enable_event_reporting.
1418 (_initialize_linux_nat): Delete call to
1419 linux_ptrace_set_additional_flags.
1420 * nat/linux-ptrace.c (current_ptrace_options): Rename to
1421 supported_ptrace_options.
1422 (additional_flags): Delete variable.
1423 (linux_check_ptrace_features): Use supported_ptrace_options.
1424 (linux_test_for_tracesysgood, linux_test_for_tracefork):
1425 Likewise, and remove additional_flags check.
1426 (linux_enable_event_reporting): Change 'attached' argument to
1427 'options'. Use supported_ptrace_options.
1428 (ptrace_supports_feature): Change comment. Use
1429 supported_ptrace_options.
1430 (linux_ptrace_set_additional_flags): Delete function.
1431 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
1432 Delete function prototype.
1433 * remote.c (remote_fork_event_p): New function.
1434 (remote_detach_pid): New function.
1435 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
1436 if doing detach-on-fork.
1437 (remote_follow_fork): New function.
1438 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
1439 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
1440 (init_extended_remote_ops): Initialize to_follow_fork.
1442 2015-05-12 Don Breazeal <donb@codesourcery.com>
1444 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
1445 from static to extern.
1446 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
1447 * remote.c (anonymous enum): <PACKET_fork_event_feature,
1448 * PACKET_vfork_event_feature>: New enumeration constants.
1449 (remote_protocol_features): Add table entries for new packets.
1450 (remote_query_supported): Add new feature queries to qSupported
1453 2015-05-12 Gary Benson <gbenson@redhat.com>
1455 * remote.c (remote_add_inferior): Call exec_file_locate_attach
1456 for fake PIDs as well as real ones.
1457 (remote_pid_to_exec_file): Send empty annex if PID is fake.
1459 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
1461 * NEWS (Python Scripting): Mention the new gdb.Value methods.
1462 * python/py-value.c (valpy_reference_value): New function.
1463 (valpy_const_value): Likewise.
1464 (value_object_methods): Add new methods.
1465 * value.c (make_cv_value): New function.
1466 * value.h (make_cv_value): Declare.
1468 2015-05-08 Yao Qi <yao@codesourcery.com>
1469 Sandra Loosemore <sandra@codesourcery.com>
1471 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
1472 to 'lh->include_dirs' before accessing to it.
1473 (psymtab_include_file_name): Likewise.
1474 (dwarf_decode_lines_1): Likewise.
1475 (dwarf_decode_lines): Likewise.
1476 (file_file_name): Likewise.
1478 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
1480 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
1481 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
1482 (nios2_linux_rt_sigreturn_init): Adjust base address of
1485 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
1487 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
1488 "trap 31" as the breakpoint instruction on all targets.
1490 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1492 * infcmd.c (print_return_value): Remove unused declaration.
1494 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1496 * dwarf2read.c (attr_to_dynamic_prop)
1497 <DW_AT_data_member_location>: Use read_type_die isntead of
1500 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1502 * ada-lang.c (ada_convert_actual): Add handling of formals
1503 passed inside an aligner type.
1505 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1507 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
1509 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
1512 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
1513 Print xmethod matcher status.
1515 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
1517 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
1518 register in the regcache when treating the PSWM register, and vice
1521 2015-05-07 Gary Benson <gbenson@redhat.com>
1523 * linux-thread-db.c (struct thread_db_info)
1524 <td_ta_map_id2thr_p>: Remove field.
1525 (try_thread_db_load_1): Remove initialization for the above.
1527 2015-05-07 Gary Benson <gbenson@redhat.com>
1529 * linux-thread-db.c (struct thread_db_info)
1530 <td_thr_validate_p>: Remove field.
1531 (try_thread_db_load_1): Remove initialization for the above.
1533 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1535 * compile/compile-object-load.c (compile_object_load): Support
1538 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1540 * compile/compile.c (compile_to_object): Make the cmd_string parameter
1541 const. Use new variables for the const compatibility.
1542 (eval_compile_command): Make the cmd_string parameter const.
1543 * compile/compile.h (eval_compile_command): Make the cmd_string
1546 2015-05-06 Joel Brobecker <brobecker@adacore.com>
1548 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
1550 * top.c (deprecated_init_ui_hook): Delete.
1551 (gdb_init): Remove handling of deprecated_init_ui_hook.
1552 * interps.c (clear_interpreter_hooks): Remove handling of
1553 deprecated_init_ui_hook.
1554 * main.c (captured_main): Update comment.
1556 2015-05-06 Joel Brobecker <brobecker@adacore.com>
1558 * solib.c (_initialize_solib): Add "info dll" alias creation.
1559 * windows-nat.c (set_windows_aliases): Delete.
1560 (_initialize_windows_nat): Remove deprecated_init_ui_hook
1562 * NEWS: Add news entry about "info dll" now being available
1565 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1567 * ada-lang.c (value_assign_to_component): Reformat and improve
1568 documentation. Remove all trailing spaces.
1570 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1572 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
1573 Stop counting inlined frames as soon as an out-of-line function
1576 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
1578 * dwarf2read.c (inherit_abstract_dies): Skip
1579 DW_TAG_GNU_call_site dies while inheriting children of an
1580 abstract DIE into a scope.
1581 (read_lexical_block_scope): Inherit abstract DIE's for
1584 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1586 * ada-valprint.c (val_print_packed_array_elements): Delete
1587 variable "len". Add a type-length check when comparing two
1588 consecutive elements of the array. Use the element's actual
1589 length in call to value_contents_eq.
1590 * ada-lang.c (ada_value_primitive_packed_val): Always return
1591 a value whose type has been resolved.
1593 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1595 * ada-lang.c (ada_value_primitive_packed_val): Recompute
1596 BIT_SIZE and LEN if the size of the resolved type is smaller
1597 than BIT_SIZE * HOST_CHAR_BIT.
1599 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1601 * ada-lang.c (ada_value_primitive_packed_val): Use a more
1602 correct address in call to value_at. Adjust call to
1603 value_address accordingly.
1605 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1607 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
1610 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1612 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
1613 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
1615 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
1616 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
1617 (resolve_dynamic_type_internal): Set pinfo.valaddr.
1618 Add handling of addr_stack->valaddr.
1619 (resolve_dynamic_type): Add "valaddr" parameter.
1620 Set pinfo.valaddr field.
1621 * ada-lang.c (ada_discrete_type_high_bound): Update call to
1622 resolve_dynamic_type.
1623 (ada_discrete_type_low_bound): Likewise.
1624 * findvar.c (default_read_var_value): Likewise.
1625 * value.c (value_from_contents_and_address): Likewise.
1627 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1629 * gdbtypes.c (resolve_dynamic_array): Use
1630 create_array_type_with_stride instead of create_array_type.
1632 2015-04-30 DJ Delorie <dj@redhat.com>
1634 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
1637 2015-04-29 Doug Evans <dje@google.com>
1640 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
1641 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
1642 EVAL_AVOID_SIDE_EFFECTS for xmethods.
1643 * extension-priv.h (struct extension_language_ops)
1644 <get_xmethod_result_type>: New member.
1645 * extension.c (get_xmethod_result_type): New function.
1646 * extension.h (get_xmethod_result_type): Declare.
1647 * python/py-xmethods.c (get_result_type_method_name): New static
1649 (py_get_result_type_method_name): Ditto.
1650 (gdbpy_get_xmethod_result_type): New function.
1651 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
1652 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
1653 * python/python.c (python_extension_ops): Add
1654 gdbpy_get_xmethod_result_type.
1655 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
1656 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
1658 (value_x_unop): Ditto.
1659 * value.c (result_type_of_xmethod): New function.
1660 * value.h (result_type_of_xmethod): Declare.
1662 2015-04-29 Gary Benson <gbenson@redhat.com>
1664 * solib.c (solib_find_1): Allow fd argument to be NULL.
1665 (exec_file_find): Update comment.
1666 (solib_find): Likewise.
1667 * exec.c (exec_file_locate_attach): Use NULL as fd
1668 argument to exec_file_find to avoid having to close
1670 * infrun.c (follow_exec): Likewise.
1672 2015-04-28 Doug Evans <dje@google.com>
1675 * python/lib/gdb/printing.py (register_pretty_printer): Handle
1676 name or __name__ attributes. Handle gdb module as first argument.
1678 2015-04-28 Doug Evans <dje@google.com>
1681 * python/py-prettyprint.c (print_children): Verify result of children
1682 iterator. Provide better error message.
1683 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
1684 * python/python.c (gdbpy_print_python_errors_p): New function.
1686 2015-04-28 Doug Evans <dje@google.com>
1688 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
1690 2015-04-28 Sasha Smundak <asmundak@google.com>
1692 * NEWS: Mention gdb.Type.optimized_out method.
1693 * python/py-type.c (typy_optimized_out): New function.
1695 2015-04-28 John Baldwin <jhb@FreeBSD.org>
1697 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
1699 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1701 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
1702 (initialize_utils): Move call of init_page_info() to ...
1703 * top.c (gdb_init): ... here.
1705 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1707 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
1708 (tui_sigwinch_handler): Still update our idea of
1709 the terminal's width and height even when TUI is not active.
1711 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1713 * utils.h (set_screen_width_and_height): Declare.
1714 * utils.c (set_screen_width_and_height): Define.
1715 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
1717 2015-04-28 Gary Benson <gbenson@redhat.com>
1719 * infrun.c (solist.h): New include.
1720 (follow_exec): Use exec_file_find to prefix execd_pathname
1723 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1725 * tui/tui-source.c (tui_set_source_content): Avoid calling
1726 strcpy() when offset is 0.
1728 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1731 * tui/tui-data.c (tui_free_window): Don't free the locator
1732 window when passed an SRC_WIN or a DISASSEM_WIN.
1734 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1736 * tui/tui-data.h (struct tui_win_element): Forward-declare.
1737 (tui_win_content): Move declaration.
1738 (struct tui_gen_win_info): Give 'content' field the
1739 type tui_win_content.
1740 * tui/tui-data.c (init_content_element): Remove redundant and
1742 (tui_add_content_elements): Remove erroneous cast.
1743 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
1745 (tui_get_begin_asm_address): Likewise.
1746 * tui/tui-regs.c (tui_show_registers): Likewise.
1747 (tui_show_register_group): Likewise.
1748 (tui_display_registers_from): Likewise.
1749 (tui_check_register_values): Likewise.
1750 * tui/tui-source.c (tui_set_source_content): Likewise.
1751 (tui_set_source_content_nil): Likewise.
1752 (tui_source_is_displayed): Likewise.
1753 * tui/tui-stack.c (tui_show_locator_content): Likewise.
1754 (tui_set_locator_fullname): Likewise.
1755 (tui_set_locator_info): Likewise.
1756 (tui_show_frame_info): Likewise.
1757 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
1758 (tui_show_source_line): Likewise.
1759 (tui_horizontal_source_scroll): Likewise.
1760 (tui_update_breakpoint_info): Likewise.
1761 (tui_set_exec_info_content): Likewise.
1762 (tui_show_exec_info_content): Likewise.
1763 (tui_alloc_source_buffer): Likewise.
1764 (tui_line_is_displayed): Likewise.
1765 (tui_addr_is_displayed): Likewise.
1767 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1769 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
1770 event if PL_FLAG_EXEC is set.
1771 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
1772 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
1773 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
1774 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
1775 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
1777 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1779 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
1780 [TDP_RFPPWAIT] New variable fbsd_pending_children.
1781 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
1782 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
1783 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
1784 [PT_LWPINFO] (fbsd_wait): New function.
1785 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
1786 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
1787 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
1788 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
1789 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
1790 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
1791 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
1792 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
1793 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
1795 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
1796 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
1797 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
1798 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
1799 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
1800 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
1801 Set "to_post_attach" to "fbsd_post_attach".
1803 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1805 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
1806 (fbsd_find_memory_regions): Mark static.
1807 (fbsd_nat_add_target): New function.
1808 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
1809 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
1810 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
1811 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
1812 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
1813 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
1815 2015-04-27 Gary Benson <gbenson@redhat.com>
1817 * objfiles.c (allocate_objfile): Do not attempt to expand name
1818 if name is a "target:" filename.
1819 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
1820 to load auto-load scripts for objfiles with "target:" filenames.
1822 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1824 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
1825 (enum s390_vector_abi_kind): New enum.
1826 (struct gdbarch_tdep)<vector_abi>: New field.
1827 (s390_effective_inner_type): Add parameter min_size. Stop
1828 unwrapping if the inner type is smaller than min_size.
1829 (s390_function_arg_float): Adjust call to
1830 s390_effective_inner_type.
1831 (s390_function_arg_vector): New function.
1832 (s390_function_arg_integer): Adjust comment.
1833 (struct s390_arg_state)<vr>: New field.
1834 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
1835 arguments according to vector ABI when appropriate.
1836 (s390_push_dummy_call): Initialize the argument state's field
1837 'vr'. Adjust calls to s390_handle_arg.
1838 (s390_register_return_value): Handle vector return values.
1839 (s390_return_value): Apply the "register" return value convention
1840 to a vector when appropriate.
1841 (s390_gdbarch_init): Initialize tdep->vector_abi.
1842 * NEWS: Announce S390 vector ABI support.
1844 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1846 * s390-linux-tdep.c (s390_return_value_convention): Remove
1847 function. Inline its logic...
1848 (s390_return_value): ...here. Instead, move the handling of the
1849 "register" return value convention...
1850 (s390_register_return_value): ...here. New function.
1852 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1855 (is_float_singleton): Remove function. Move the "singleton" part
1857 (s390_effective_inner_type): ...here. New function.
1858 (is_float_like): Remove function. Inline its logic...
1859 (s390_function_arg_float): ...here.
1860 (is_pointer_like, is_integer_like, is_struct_like): Remove
1861 functions. Inline their logic...
1862 (s390_function_arg_integer): ...here.
1863 (s390_function_arg_pass_by_reference): Remove function.
1864 (extend_simple_arg): Remove function.
1865 (alignment_of): Remove function.
1866 (struct s390_arg_state): New structure.
1867 (s390_handle_arg): New function.
1868 (s390_push_dummy_call): Move parameter placement logic to the new
1869 function s390_handle_arg. Call it for calculating the stack area
1870 sizes first, and again for actually writing the parameters.
1872 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1874 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
1875 false if the argument is zero.
1877 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
1879 * ada-lang.c (template_to_static_fixed_type): Return input type
1880 when it is already fixed. Cache the input type itself when not
1881 creating a static fixed copy. Make it explicit that we never
1882 molestate the input type.
1883 * gdbtypes.c (resolve_dynamic_struct): Reset the
1884 TYPE_TARGET_TYPE field for resolved copies.
1886 2015-04-27 Joel Brobecker <brobecker@adacore.com>
1888 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
1889 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
1890 (template_to_static_fixed_type): Call ada_check_typedef only
1893 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
1895 * cli/cli-dump.c (srec_dump_command): Add internationalization
1897 (ihex_dump_command): Likewise.
1898 (tekhex_dump_command): Likewise.
1899 (binary_dump_command): Likewise.
1900 (binary_append_command): Likewise.
1902 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
1904 * cli/cli-dump.c (verilog_cmdlist): New variable.
1905 (dump_verilog_memory): New function.
1906 (dump_verilog_value): New function.
1907 (verilog_dump_command): New function.
1908 (_initialize_cli_dump): Add new commands to support verilog dump
1910 * NEWS: Add entry for "dump verilog".
1912 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
1914 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
1915 descriptive type when there is none.
1917 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
1919 * tui/tui-win.c (tui_async_resize_screen): Call
1920 rl_resize_terminal().
1922 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
1924 * windows-nat.c (handle_output_debug_string): Don't change
1925 current_event.dwThreadId.
1926 (get_windows_debug_event): Use thread_id, rather than relying on
1927 current_event.dwThreadId being changed.
1929 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
1931 * windows-nat.c (windows_continue): Report an error if
1932 ContinueDebugEvent() fails.
1934 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1936 * windows-nat.c (windows_resume): Fix misspelling in debug output.
1938 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1940 * windows-nat.c (get_windows_debug_event): Replace retval with
1941 thread_id throughout. Update stale comment.
1943 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1945 * windows-nat.c (get_windows_debug_event): Don't use ternary
1946 conditional operator.
1948 2015-04-21 Pierre Muller <muller@sourceware.org>
1951 p-exp.y (yylex): Reorganize code to return the matched pattern
1952 for a field of this.
1954 2015-04-21 Gary Benson <gbenson@redhat.com>
1956 * common/fileio.h (fileio_to_host_openflags): New declaration.
1957 * common/fileio.c (fcntl.h): New include.
1958 (fileio_to_host_openflags): New function, factored out from...
1959 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
1962 2015-04-21 Kevin Buettner <kevinb@redhat.com>
1964 * rl78-tdep.c (RL78_SP_ADDR): Define.
1965 (opc_reg_to_gdb_regnum): New static function.
1966 (rl78_analyze_prologue): Recognize instructions forming slightly
1967 more interesting prologues.
1969 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
1972 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1973 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
1974 TYPE_CODE_REF types so that they are not considered as dynamic
1975 depending on the referenced type.
1976 (resolve_dynamic_type_internal): Likewise.
1978 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
1981 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1982 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
1983 "top_level" parameter.
1984 (resolve_dynamic_type_internal): Remove the unused "top_level"
1985 parameter. Update call to is_dynamic_type_internal.
1986 (is_dynamic_type): Update call to is_dynamic_type_internal.
1987 (resolve_dynamic_range): Update call to
1988 resolve_dynamic_type_internal.
1989 (resolve_dynamic_union): Likewise.
1990 (resolve_dynamic_struct): Likewise.
1991 (resolve_dynamic_type): Likewise.
1993 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
1995 * breakpoint.c (update_dprintf_command_list): Remove duplicated
1998 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
2000 * reply_mig_hack.awk: Robustify parsing.
2002 * reply_mig_hack.awk: Don't bother to declare an intermediate
2003 function pointer variable.
2005 2015-04-17 Doug Evans <dje@google.com>
2007 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
2008 to "exec_displacement" to avoid confusion with inner use of the name.
2010 2015-04-17 Pedro Alves <palves@redhat.com>
2012 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
2013 if HW point of TYPE isn't supported.
2015 2015-04-17 Yao Qi <yao.qi@linaro.org>
2016 Pedro Alves <palves@redhat.com>
2018 * target.h (target_can_use_hardware_watchpoint): Update comments.
2019 Remove trailing ";".
2021 2015-04-17 Gary Benson <gbenson@redhat.com>
2023 * remote.c (remote_add_inferior): New argument try_open_exec.
2024 If nonzero, attempt to open the inferior's executable file as
2025 the main executable if no main executable is open already.
2026 All callers updated.
2027 * NEWS: Mention that GDB now supports automatic location and
2028 retrieval of executable + files from remote targets.
2030 2015-04-17 Gary Benson <gbenson@redhat.com>
2032 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
2033 * remote.c (PACKET_qXfer_exec_file): Likewise.
2034 (remote_protocol_features): Register the
2035 "qXfer:exec-file:read" feature.
2036 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
2037 (remote_pid_to_exec_file): New function.
2038 (init_remote_ops): Initialize to_pid_to_exec_file.
2039 (_initialize_remote): Register new "set/show remote
2040 pid-to-exec-file-packet" command.
2041 * NEWS: Announce new qXfer:exec-file:read packet.
2043 2015-04-17 Gary Benson <gbenson@redhat.com>
2045 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
2047 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
2048 New function, factored out from...
2049 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
2051 2015-04-17 Gary Benson <gbenson@redhat.com>
2053 * exec.c (solist.h): New include.
2054 (exec_file_locate_attach): Prefix absolute executable
2055 paths with gdb_sysroot if set.
2056 * NEWS: Mention that executable paths may be prepended
2059 2015-04-17 Gary Benson <gbenson@redhat.com>
2061 * solist.h (exec_file_find): New declaration.
2062 * solib.c (solib_find_1): New function, factored out from...
2063 (solib_find): ...here.
2064 (exec_file_find): New function.
2066 2015-04-17 Gary Benson <gbenson@redhat.com>
2068 * gdbcore.h (exec_file_locate_attach): New declaration.
2069 * exec.c (exec_file_locate_attach): New function, factored
2071 * infcmd.c (attach_command_post_wait): ...here.
2073 2015-04-17 Mike Frysinger <vapier@gentoo.org>
2075 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
2077 2015-04-16 Yao Qi <yao.qi@linaro.org>
2079 * infrun.c (maybe_software_singlestep): Declare.
2080 (displaced_step_fixup): Call maybe_software_singlestep.
2082 2015-04-15 Doug Evans <dje@google.com>
2084 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
2086 2015-04-15 Doug Evans <dje@google.com>
2088 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
2090 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
2092 * python/lib/gdb/command/unwinders.py: Add parentheses.
2094 2015-04-15 Yao Qi <yao.qi@linaro.org>
2096 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
2098 2015-04-15 Yao Qi <yao.qi@linaro.org>
2100 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
2102 2015-04-15 Yao Qi <yao.qi@linaro.org>
2104 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
2105 dsc->insn_size instead of 4.
2107 2015-04-14 Gary Benson <gbenson@redhat.com>
2109 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
2110 * minidebug.c (lzma_stat): Likewise.
2111 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
2112 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
2114 2015-04-13 Stan Shebs <stanshebs@google.com>
2116 * MAINTAINERS: Update my email address.
2118 2015-04-13 John Baldwin <jhb@FreeBSD.org>
2120 * amd64-tdep.c (amd64_target_description): New function.
2121 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
2122 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
2123 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
2124 x86 extended save area.
2125 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
2126 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
2127 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
2128 (_initialize_amd64fbsd_nat): Set "to_read_description" to
2129 "amd64fbsd_read_description".
2130 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
2131 (amd64fbsd_supply_xstateregset): New function.
2132 (amd64fbsd_collect_xstateregset): New function.
2133 Add "amd64fbsd_xstateregset".
2134 (amd64fbsd_iterate_over_regset_sections): New function.
2135 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
2136 "I386_FBSD_XSAVE_XCR0_OFFSET".
2137 Add "iterate_over_regset_sections" gdbarch method.
2138 Add "core_read_description" gdbarch method.
2139 * i386-tdep.c (i386_target_description): New function.
2140 * i386-tdep.h: Export i386_target_description and tdesc_i386.
2141 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
2142 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
2143 x86 extended save area.
2144 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
2145 * i386bsd-nat.h: Export i386bsd_xsave_len.
2146 * i386fbsd-nat.c (i386fbsd_read_description): New function.
2147 (_initialize_i386fbsd_nat): Set "to_read_description" to
2148 "i386fbsd_read_description".
2149 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
2150 (i386fbsd_core_read_description): New function.
2151 (i386fbsd_supply_xstateregset): New function.
2152 (i386fbsd_collect_xstateregset): New function.
2153 Add "i386fbsd_xstateregset".
2154 (i386fbsd_iterate_over_regset_sections): New function.
2155 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
2156 "I386_FBSD_XSAVE_XCR0_OFFSET".
2157 Add "iterate_over_regset_sections" gdbarch method.
2158 Add "core_read_description" gdbarch method.
2159 * i386fbsd-tdep.h: New file.
2161 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2163 * NEWS (Changes since GDB 7.9): Add removed -xdb.
2164 * breakpoint.c (command_line_is_silent): Remove xdb_commands
2166 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
2168 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
2170 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
2172 * defs.h (xdb_commands): Remove declaration.
2173 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
2174 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
2175 * infcmd.c (run_no_args_command, go_command): Remove.
2176 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
2177 * infrun.c (xdb_handle_command): Remove.
2178 (_initialize_infrun): Remove xdb_commands for lz and z.
2179 * main.c (xdb_commands): Remove variable.
2180 (captured_main): Remove "xdb" from long_options.
2181 (print_gdb_help): Remove --xdb from help.
2182 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
2183 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
2184 * stack.c (backtrace_full_command, args_plus_locals_info)
2185 (current_frame_command): Remove.
2186 (_initialize_stack): Remove xdb_commands for t, T and l.
2187 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
2188 * thread.c (_initialize_thread): Remove xdb_commands condition.
2189 * tui/tui-layout.c (tui_toggle_layout_command)
2190 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
2191 (_initialize_tui_layout): Remove xdb_commands for td and ts.
2192 * tui/tui-regs.c (tui_scroll_regs_forward_command)
2193 (tui_scroll_regs_backward_command): Remove.
2194 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
2195 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
2196 (_initialize_tui_win): Remove xdb_commands for U and w.
2197 * utils.c (pagination_on_command, pagination_off_command): Remove.
2198 (initialize_utils): Remove xdb_commands for am and sm.
2200 2015-04-10 Pedro Alves <palves@redhat.com>
2202 * infrun.c (displaced_step_fixup): Switch to the event ptid
2203 earlier. If the thread stopped for a watchpoint and the
2204 target/arch has non-continuable watchpoints, cancel the displaced
2206 (resume): Don't start a displaced step if in-line step-over info
2209 2015-04-10 Pedro Alves <palves@redhat.com>
2211 * infrun.c (displaced_step_in_progress): New function.
2212 (do_target_resume): Advise target to report all signals if
2215 2015-04-10 Pedro Alves <palves@redhat.com>
2218 * infrun.c (process_event_stop_test): Don't assume a step-resume
2219 is set if tp->stepped_breakpoint is true.
2221 2015-04-10 Yao Qi <yao.qi@linaro.org>
2223 * arm-tdep.c (install_alu_reg): Update comment.
2224 (thumb_copy_alu_reg): Remove local variable rn. Update
2225 debugging message. Use r2 instead of r1 in the modified
2228 2015-04-10 Pedro Alves <palves@redhat.com>
2231 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
2232 linux_displaced_step_location as gdbarch_displaced_step_location
2234 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
2235 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
2236 * linux-tdep.c (linux_displaced_step_location): New function,
2237 based on ppc_linux_displaced_step_location.
2238 * linux-tdep.h (linux_displaced_step_location): New declaration.
2239 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
2240 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
2242 (ppc_linux_init_abi): Install linux_displaced_step_location as
2243 gdbarch_displaced_step_location hook, even without Cell/B.E..
2244 (_initialize_ppc_linux_tdep): Don't install
2245 ppc_linux_inferior_created as inferior_created observer.
2246 * s390-linux-tdep.c (s390_gdbarch_init): Install
2247 linux_displaced_step_location as gdbarch_displaced_step_location
2250 2015-04-09 Gary Benson <gbenson@redhat.com>
2252 * common/common-remote-fileio.h: Rename to...
2253 * common/fileio.h: ...this. Update all references.
2254 (remote_fileio_to_fio_error): Rename to...
2255 (host_to_fileio_error): ...this.
2256 (remote_fileio_to_be): Rename to...
2257 (host_to_bigendian): ...this. Update all callers.
2258 (remote_fileio_to_fio_uint): Rename to...
2259 (host_to_fileio_uint): ...this. Update all callers.
2260 (remote_fileio_to_fio_time): Rename to...
2261 (host_to_fileio_time): ...this. Update all callers.
2262 (remote_fileio_to_fio_stat): Rename to...
2263 (host_to_fileio_stat): ...this.
2264 Update all references.
2265 * common/common-remote-fileio.c: Rename to...
2266 * common/fileio.c: ...this. Update all references.
2267 (remote_fileio_to_fio_error): Rename to...
2268 (host_to_fileio_error): ...this. Update all callers.
2269 (remote_fileio_mode_to_target): Rename to...
2270 (fileio_mode_pack): ...this. Update all callers.
2271 (remote_fileio_to_fio_mode): Rename to...
2272 (host_to_fileio_mode): ...this. Update all callers.
2273 (remote_fileio_to_fio_ulong): Rename to...
2274 (host_to_fileio_ulong): ...this. Update all callers.
2275 (remote_fileio_to_fio_stat): Rename to...
2276 (host_to_fileio_stat): ...this. Update all callers.
2278 2015-04-09 Andy Wingo <wingo@igalia.com>
2280 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
2281 (frame_functions): Bind gdbscm_frame_read_register to
2282 frame-read-register.
2283 * guile/lib/gdb.scm (frame-read-register): Export.
2285 2015-04-09 Gary Benson <gbenson@redhat.com>
2287 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
2289 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
2290 New function, factored out the named functions below.
2291 * inf-child.c (gdb/fileio.h): Remove include.
2292 (common-remote-fileio.h): New include.
2293 (inf_child_errno_to_fileio_error): Remove function. Update
2294 all callers to use remote_fileio_to_fio_error.
2295 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
2297 2015-04-09 Andy Wingo <wingo@igalia.com>
2299 * MAINTAINERS (Write After Approval): Add Andy Wingo.
2301 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
2303 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
2304 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
2305 * configure: Regenerated.
2307 2015-04-09 Pedro Alves <palves@redhat.com>
2309 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
2310 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
2311 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
2312 * gnulib/import/Makefile.am: Update.
2313 * gnulib/import/Makefile.in: Update.
2314 * gnulib/import/m4/gnulib-cache.m4: Update.
2315 * gnulib/import/m4/gnulib-comp.m4: Update.
2316 * gnulib/import/m4/strtok_r.m4: New file.
2317 * gnulib/import/strtok_r.c: New file.
2319 2015-04-09 Pedro Alves <palves@redhat.com>
2321 * gnulib/update-gnulib.sh (aclocal version check): Filter out
2322 "called too early to check prototype".
2324 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
2327 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
2328 use a caching mechanism. Adjust comments and code to reflect
2329 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
2330 (cmdpy_completer_handle_brkchars): Adjust call to
2331 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
2332 (cmdpy_completer): Likewise.
2334 2015-04-08 Yao Qi <yao.qi@linaro.org>
2336 * spu-tdep.c (spu_gdbarch_init): Don't call
2337 set_gdbarch_cannot_step_breakpoint.
2339 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
2341 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
2343 2015-04-07 Pedro Alves <palves@redhat.com>
2345 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
2346 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
2347 (delete_exited_threads): New declaration.
2348 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
2349 * linux-nat.c (linux_nat_update_thread_list): New function.
2350 (linux_nat_add_target): Install it.
2351 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
2352 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
2353 (delete_exited_threads): New function.
2355 2015-04-07 Pedro Alves <pedro@codesourcery.com>
2357 * infrun.c (resume) <displaced stepping debug output>: Get the
2358 leader thread's regcache, not resume_ptid's.
2360 2015-04-06 Doug Evans <xdje42@gmail.com>
2362 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
2364 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
2365 Include symbol domain in debugging output.
2367 2015-04-06 Pedro Alves <palves@redhat.com>
2368 Bernd Edlinger <bernd.edlinger@hotmail.de>
2370 * configure.ac: Remove the mingw32-specific stub-termcap.o
2371 fallback, and instead fallback to the stub termcap on all hosts.
2372 * configure: Regenerate.
2373 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
2376 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2378 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
2379 "top_level" parameter.
2380 (resolve_dynamic_type_internal): Remove the unused "top_level"
2381 parameter. Update call to is_dynamic_type_internal.
2382 (is_dynamic_type): Update call to is_dynamic_type_internal.
2383 (resolve_dynamic_range): Update call to
2384 resolve_dynamic_type_internal.
2385 (resolve_dynamic_union): Likewise.
2386 (resolve_dynamic_struct): Likewise.
2387 (resolve_dynamic_type): Likewise.
2389 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2391 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
2392 TYPE_CODE_REF types so that they are not considered as dynamic
2393 depending on the referenced type.
2394 (resolve_dynamic_type_internal): Likewise.
2396 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
2398 * Makefile.in (top_srcdir): New.
2399 * configure: Regenerated.
2401 2015-04-02 Gary Benson <gbenson@redhat.com>
2403 * NEWS: Announce the new default sysroot of "target:".
2405 2015-04-02 Gary Benson <gbenson@redhat.com>
2407 * main.c (captured_main): Set gdb_sysroot to "target:"
2408 if not otherwise set.
2410 2015-04-02 Gary Benson <gbenson@redhat.com>
2412 * exec.c (exec_file_attach): Support "target:" filenames.
2414 2015-04-02 Gary Benson <gbenson@redhat.com>
2416 * solib.c (solib_find): Strip "target:" prefix from sysroot
2417 if accessing local files.
2419 2015-04-02 Gary Benson <gbenson@redhat.com>
2421 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
2422 checks and error messages.
2424 2015-04-02 Gary Benson <gbenson@redhat.com>
2426 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
2427 (remote_filename_p): Remove declaration.
2428 (remote_bfd_open): Likewise.
2429 * remote.c (remote_bfd_iovec_open): Remove function.
2430 (remote_bfd_iovec_close): Likewise.
2431 (remote_bfd_iovec_pread): Likewise.
2432 (remote_bfd_iovec_stat): Likewise.
2433 (remote_filename_p): Likewise.
2434 (remote_bfd_open): Likewise.
2435 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
2436 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
2437 (gdb_bfd_open_maybe_remote): Remove function.
2438 (symfile_bfd_open): Replace remote filename check with
2439 target filename check.
2440 (reread_symbols): Use gdb_bfd_open.
2441 * build-id.c (gdbcore.h): New include.
2442 (build_id_to_debug_bfd): Use gdb_bfd_open.
2443 * infcmd.c (attach_command_post_wait): Remove remote filename
2445 * solib.c (solib_find): Replace remote-specific handling with
2446 target-specific handling. Update comments where necessary.
2447 (solib_bfd_open): Replace remote-specific handling with
2448 target-specific handling.
2449 (gdb_sysroot_changed): New function.
2450 (_initialize_solib): Call the above when gdb_sysroot changes.
2451 * windows-tdep.c (gdbcore.h): New include.
2452 (windows_xfer_shared_library): Use gdb_bfd_open.
2454 2015-04-02 Gary Benson <gbenson@redhat.com>
2456 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
2457 (is_target_filename): New declaration.
2458 (gdb_bfd_has_target_filename): Likewise.
2459 (gdb_bfd_open): Update documentation comment.
2460 * gdb_bfd.c (target.h): New include.
2461 (gdb/fileio.h): Likewise.
2462 (is_target_filename): New function.
2463 (gdb_bfd_has_target_filename): Likewise.
2464 (fileio_errno_to_host): Likewise.
2465 (gdb_bfd_iovec_fileio_open): Likewise.
2466 (gdb_bfd_iovec_fileio_pread): Likewise.
2467 (gdb_bfd_iovec_fileio_close): Likewise.
2468 (gdb_bfd_iovec_fileio_fstat): Likewise.
2469 (gdb_bfd_open): Use target fileio to access paths prefixed
2470 with "target:" where necessary.
2472 2015-04-02 Gary Benson <gbenson@redhat.com>
2474 * target.h (struct target_ops) <to_filesystem_is_local>:
2476 (target_filesystem_is_local): New macro.
2477 * target-delegates.c: Regenerate.
2478 * remote.c (remote_filesystem_is_local): New function.
2479 (init_remote_ops): Initialize to_filesystem_is_local.
2481 2015-04-02 Gary Benson <gbenson@redhat.com>
2483 * target.h (struct target_ops) <to_fileio_fstat>: New field.
2484 (target_fileio_fstat): New declaration.
2485 * target.c (target_fileio_fstat): New function.
2486 * inf-child.c (inf_child_fileio_fstat): Likewise.
2487 (inf_child_target): Initialize to_fileio_fstat.
2488 * remote.c (init_remote_ops): Likewise.
2490 2015-04-01 Sasha Smundak <asmundak@google.com>
2492 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
2493 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
2494 (py-unwind.o): New recipe.
2495 * NEWS: mention Python frame unwinding.
2496 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
2497 gdb/unwinder.py and gdb/command/unwinder.py
2498 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
2500 (execute_unwinders): New function.
2501 * python/lib/gdb/command/unwinders.py: New file.
2502 * python/lib/gdb/unwinder.py: New file.
2503 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
2504 (objfpy_dealloc): Decrement frame_unwinders reference count.
2505 (objfpy_initialize): Create frame_unwinders list.
2506 (objfpy_get_frame_unwinders): New function.
2507 (objfpy_set_frame_unwinders): Ditto.
2508 (objfile_getset): Add frame_unwinders attribute to Objfile.
2509 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
2510 (pspy_dealloc): Decrement frame_unwinders reference count.
2511 (pspy_initialize): Create frame_unwinders list.
2512 (pspy_get_frame_unwinders): New function.
2513 (pspy_set_frame_unwinders): Ditto.
2514 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
2515 * python/py-unwind.c: New file.
2516 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
2517 (objpy_get_frame_unwinders): New prototype.
2518 (gdbpy_initialize_unwind): New prototype.
2519 * python/python.c (gdbpy_apply_type_printers): Call
2520 gdbpy_initialize_unwind.
2522 2015-04-01 Pedro Alves <palves@redhat.com>
2524 * infrun.c (resume): Check currently_stepping after clearing
2525 stepped_breakpoint, not before.
2527 2015-04-01 Pedro Alves <palves@redhat.com>
2529 * infrun.c (print_target_wait_results): Print all the ptid
2532 2015-04-01 Pedro Alves <palves@redhat.com>
2534 * infrun.c (keep_going): Also discard cleanups if inserting
2537 2015-04-01 Pedro Alves <palves@redhat.com>
2539 * infrun.c (wait_for_inferior): Install the
2540 finish_thread_state_cleanup cleanup across the whole function, not
2541 just around handle_inferior_event.
2543 2015-04-01 Pedro Alves <palves@redhat.com>
2545 * infrun.c (resume) <step past permanent breakpoint>: Use
2548 2015-04-01 Pedro Alves <palves@redhat.com>
2550 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
2552 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
2554 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
2556 2015-04-01 Pedro Alves <palves@redhat.com>
2558 * linux-thread-db.c (record_thread): Readd the thread to gdb's
2559 list if it was marked exited.
2561 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
2563 * configure: Regenerated.
2565 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
2566 Jan Kratochvil <jan.kratochvil@redhat.com>
2567 Oleg Nesterov <oleg@redhat.com>
2570 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
2571 New enum identifying the various options of the coredump_filter
2573 (struct smaps_vmflags): New struct.
2574 (use_coredump_filter): New variable.
2575 (decode_vmflags): New function.
2576 (mapping_is_anonymous_p): Likewise.
2577 (dump_mapping_p): Likewise.
2578 (linux_find_memory_regions_full): New variables
2579 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
2580 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
2581 parsing of its information. Implement memory mapping filtering
2582 based on its contents.
2583 (show_use_coredump_filter): New function.
2584 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
2585 * NEWS: Mention the possibility of using the
2586 '/proc/PID/coredump_filter' file when generating a corefile.
2587 Mention new command 'set use-coredump-filter'.
2589 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
2591 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
2592 read_memory_unsigned_integer.
2594 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
2596 * Makefile.in (ZLIB): New.
2597 (ZLIBINC): Likewise.
2598 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
2599 (CLIBS): Add $(ZLIB).
2600 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
2602 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
2603 * top.c (print_gdb_configuration): Remove --with-zlib and
2605 * config.in: Regenerated.
2606 * configure: Likewise.
2608 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
2610 * NEWS: Mention info os cpus support.
2611 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
2612 (struct osdata_type): Add cpus entry, reorder the entries in
2615 2015-03-31 Matthias Klose <doko@ubuntu.com>
2617 * compile/compile.c (compile_to_object): Allow triplets with or
2620 2015-03-30 Doug Evans <dje@google.com>
2623 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
2624 klass in VAR_DOMAIN.
2626 2015-03-30 Gary Benson <gbenson@redhat.com>
2628 * remote.c (remote_mourn_1): Remove function. Update all callers
2629 to use remote_mourn.
2630 (extended_remote_mourn_1): Remove function. Update all callers
2631 to use extended_remote_mourn.
2632 (extended_remote_attach_1): Remove function. Update all callers
2633 to use extended_remote_attach.
2635 2015-03-28 James Bowman <james.bowman@ftdichip.com>
2637 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
2638 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
2639 (ALLDEPFILES): Add ft32-tdep.c.
2640 * configure.tgt: Add FT32 entry.
2641 * ft32-tdep.c: New file, FT32 target-dependent code.
2642 * ft32-tdep.h: New file, FT32 target-dependent code.
2644 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
2647 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2649 * printcmd.c (print_command_1): Move expr variable scope.
2651 2015-03-27 Joel Brobecker <brobecker@adacore.com>
2653 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
2655 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
2657 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
2660 2015-03-26 Joel Brobecker <brobecker@adacore.com>
2662 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
2663 exception raised while parsing the probe arguments.
2664 Force parsing to be done using the C language parser.
2665 * expression.h (parse_expression_with_language): Declare.
2666 * parse.c (parse_expression_with_language): New function.
2668 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
2670 * MAINTAINERS (Write After Approval): Add "Jon Turney".
2672 2015-03-26 Andy Wingo <wingo@igalia.com>
2675 * dwarf2read.c (struct partial_die_info): Add has_const_value
2677 (add_partial_symbol): Don't punt on symbols that have const_value
2679 (read_partial_die): Detect DW_AT_const_value.
2681 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2684 * printcmd.c (print_command_1): Move expr variable scope.
2686 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2689 * printcmd.c (validate_format): Make the parameter cmdname const.
2691 2015-03-26 Don Breazeal <donb@codesourcery.com>
2693 * remote.c (_initialize_remote): Update comment.
2695 2015-03-26 Pedro Alves <palves@redhat.com>
2696 Jon TURNEY <jon.turney@dronecode.org.uk>
2698 * coffread.c (coff_symfile_read): When constructing the name of an
2699 import stub symbol from import symbol for amd64, only skip the
2700 char after _imp_ if the target is underscored (like i386) and the
2701 char is indeed the target's leading char.
2703 2015-03-25 Pedro Alves <palves@redhat.com>
2705 * target.h <to_async>: Replace 'callback' and 'context' parameters
2706 with boolean 'enable' parameter.
2707 (target_async): Replace CALLBACK and CONTEXT parameters with
2708 boolean ENABLE parameter.
2709 * inf-loop.c (inferior_event_handler): Adjust.
2710 * linux-nat.c (linux_nat_attach, linux_nat_resume)
2711 (linux_nat_resume): Adjust.
2712 (async_client_callback, async_client_context): Delete.
2713 (handle_target_event): Call inferior_event_handler directly.
2714 (linux_nat_async): Replace 'callback' and 'context' parameters
2715 with boolean 'enable' parameter. Adjust. Remove references to
2716 async_client_callback and async_client_context.
2717 (linux_nat_close): Adjust.
2718 * record-btrace.c (record_btrace_async): Replace 'callback' and
2719 'context' parameters with boolean 'enable' parameter. Adjust.
2720 (record_btrace_resume): Adjust.
2721 * record-full.c (record_full_async): Replace 'callback' and
2722 'context' parameters with boolean 'enable' parameter. Adjust.
2723 (record_full_resume, record_full_core_resume): Adjust.
2724 * remote.c (struct remote_state) <async_client_callback,
2725 async_client_context>: Delete fields.
2726 (remote_start_remote, extended_remote_attach_1, remote_resume)
2727 (extended_remote_create_inferior): Adjust.
2728 (remote_async_serial_handler): Call inferior_event_handler
2730 (remote_async): Replace 'callback' and 'context' parameters with
2731 boolean 'enable' parameter. Adjust.
2732 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
2734 * target-delegates.c: Regenerate.
2736 2015-03-25 Gary Benson <gbenson@redhat.com>
2737 Pedro Alves <palves@redhat.com>
2739 * target.c (fileio_ft_t): New typedef, define object vector.
2740 (fileio_fhandles): New static variable.
2741 (is_closed_fileio_fh): New macro.
2742 (lowest_closed_fd): New static variable.
2743 (acquire_fileio_fd): New function.
2744 (release_fileio_fd): Likewise.
2745 (fileio_fd_to_fh): New macro.
2746 (target_fileio_open): Wrap the file descriptor on success.
2747 (target_fileio_pwrite): Updated to use wrapped file descriptor.
2748 (target_fileio_pread): Likewise.
2749 (target_fileio_close): Likewise.
2751 2015-03-24 Pedro Alves <palves@redhat.com>
2753 * thread.c (thread_apply_all_command): Take exited threads into
2756 2015-03-24 Pedro Alves <palves@redhat.com>
2758 * infrun.c (resume, proceed): Mention
2759 switch_back_to_stepped_thread, not switch_back_to_stepping.
2761 2015-03-24 Pedro Alves <palves@redhat.com>
2763 * infrun.c (user_visible_resume_ptid): Rewrite going from
2764 most-locked to unlocked instead of the opposite. Move comment ...
2765 * infrun.h (user_visible_resume_ptid): ... here.
2767 2015-03-24 Pedro Alves <palves@redhat.com>
2769 * linux-nat.c (linux_nat_resume): Output debug logs before trying
2770 to resume the event lwp. Use the lwp's ptid instead of the passed
2771 in (maybe wildcard) ptid.
2772 (stop_wait_callback): Tweak debug log output.
2773 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
2775 (linux_nat_filter_event): In debug output, distinguish a
2776 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
2777 before trying to resume the lwp.
2779 2015-03-24 Joel Brobecker <brobecker@adacore.com>
2781 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
2782 pointer indirection.
2783 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
2784 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
2786 2015-03-24 Joel Brobecker <brobecker@adacore.com>
2788 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
2789 Renames DYN_ATTR_DATA_LOCATION.
2790 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
2791 DYN_ATTR_DATA_LOCATION.
2792 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
2793 instead of DYN_ATTR_DATA_LOCATION.
2795 2015-03-24 Pedro Alves <palves@redhat.com>
2797 * breakpoint.c (until_break_command): Adjust call to proceed.
2798 * gdbthread.h (struct thread_control_state) <stepping_command>:
2800 * infcall.c (run_inferior_call): Adjust call to proceed.
2801 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
2802 Adjust calls to proceed.
2803 (set_step_frame): Set the current thread's step_start_function
2805 (step_once): Adjust calls to proceed.
2806 (jump_command, signal_command, until_next_command)
2807 (finish_backward, finish_forward, proceed_after_attach_callback)
2808 (attach_command_post_wait): Adjust calls to proceed.
2809 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
2810 (do_target_resume): New function, factored out from ...
2811 (resume): ... here. Remove 'step' parameter. Instead, check
2812 currently_stepping to determine whether the thread should be
2814 (proceed): Remove 'step' parameter and don't set the thread's
2815 step_start_function here. Adjust call to 'resume'.
2816 (handle_inferior_event): Adjust calls to 'resume'.
2817 (switch_back_to_stepped_thread): Use do_target_resume instead of
2819 (keep_going): Adjust calls to 'resume'.
2820 * infrun.h (proceed): Remove 'step' parameter.
2822 * windows-nat.c (do_initial_windows_stuff): Adjust call to
2824 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
2826 2015-03-24 Pedro Alves <palves@redhat.com>
2828 * gdbthread.h (struct thread_control_state) <stepping_command>:
2830 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
2831 the thread's stepping_command field.
2832 * infrun.c (resume): Check the thread's stepping_command flag to
2833 determine which threads should be resumed. Rename 'entry_step'
2835 (clear_proceed_status_thread): Clear 'stepping_command'.
2836 (schedlock_applies): Change parameter type to struct thread_info
2838 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
2839 (switch_back_to_stepped_thread): Adjust calls to
2840 'schedlock_applies'.
2841 (_initialize_infrun): Adjust "set scheduler-locking step" help.
2843 2015-03-24 Pedro Alves <palves@redhat.com>
2845 * infrun.c (step_start_function): Delete and ...
2846 * gdbthread.h (struct thread_control_state) <step_start_function>:
2847 ... now a field here.
2848 * infrun.c (clear_proceed_status_thread): Clear the thread's
2849 step_start_function.
2850 (proceed, process_event_stop_test, print_stop_event): Adjust.
2852 2015-03-24 Pedro Alves <palves@redhat.com>
2854 * infrun.c (proceed): No longer handle negative step.
2856 2015-03-24 Gary Benson <gbenson@redhat.com>
2858 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
2859 (x86_linux_prepare_to_resume): Likewise.
2860 * x86-linux-nat.c (x86_linux_new_thread):
2861 Moved to nat/x86-linux.c.
2862 (x86_linux_prepare_to_resume): Likewise.
2863 * nat/x86-linux.c (x86_linux_new_thread): New function.
2864 (x86_linux_prepare_to_resume): Likewise.
2866 2015-03-24 Gary Benson <gbenson@redhat.com>
2868 * nat/x86-linux-dregs.h: New file.
2869 * nat/x86-linux-dregs.c: Likewise.
2870 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
2871 (x86-linux-dregs.o): New rule.
2872 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
2873 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2874 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
2875 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
2876 (x86_linux_dr_get): Likewise.
2877 (x86_linux_dr_set): Likewise.
2878 (x86_linux_dr_get_addr): Likewise.
2879 (x86_linux_dr_get_control): Likewise.
2880 (x86_linux_dr_get_status): Likewise.
2881 (update_debug_registers_callback): Likewise.
2882 (x86_linux_dr_set_control): Likewise.
2883 (x86_linux_dr_set_addr): Likewise.
2884 (x86_linux_update_debug_registers): Likewise.
2886 2015-03-24 Gary Benson <gbenson@redhat.com>
2888 * x86-linux-nat.c (x86_linux_update_debug_registers):
2889 New function, factored out from...
2890 (x86_linux_prepare_to_resume): ...this.
2892 2015-03-24 Gary Benson <gbenson@redhat.com>
2894 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
2895 (x86_linux_dr_set): Likewise.
2896 (x86_linux_dr_get_addr): Likewise.
2897 (x86_linux_dr_get_control): Likewise.
2898 (x86_linux_dr_get_status): Likewise.
2899 (update_debug_registers_callback): Likewise.
2900 (x86_linux_dr_set_control): Likewise.
2901 (x86_linux_dr_set_addr): Likewise.
2902 (x86_linux_prepare_to_resume): Likewise.
2903 (x86_linux_new_thread): Likewise.
2905 2015-03-24 Gary Benson <gbenson@redhat.com>
2907 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
2908 (x86_linux_new_thread): Rename argument.
2910 2015-03-24 Gary Benson <gbenson@redhat.com>
2912 * nat/x86-linux.h: New file.
2913 * nat/x86-linux.c: Likewise.
2914 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
2915 (x86-linux.o): New rule.
2916 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
2917 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2918 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
2919 (lwp_set_arch_private_info): New declaration.
2920 (lwp_arch_private_info): Likewise.
2921 * linux-nat.c (lwp_set_arch_private_info): New function.
2922 (lwp_arch_private_info): Likewise.
2923 * x86-linux-nat.c: Include nat/x86-linux.h.
2924 (arch_lwp_info): Removed structure.
2925 (update_debug_registers_callback):
2926 Use lwp_set_debug_registers_changed.
2927 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
2928 and lwp_set_debug_registers_changed.
2929 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2931 2015-03-24 Gary Benson <gbenson@redhat.com>
2933 * nat/linux-nat.h (ptid_of_lwp): New declaration.
2934 (lwp_is_stopped): Likewise.
2935 (lwp_stop_reason): Likewise.
2936 * linux-nat.c (ptid_of_lwp): New function.
2937 (lwp_is_stopped): Likewise.
2938 (lwp_is_stopped_by_watchpoint): Likewise.
2939 * x86-linux-nat.c (update_debug_registers_callback):
2941 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
2944 2015-03-24 Gary Benson <gbenson@redhat.com>
2946 * linux-nat.h (linux_stop_lwp): Move declaration to...
2947 * nat/linux-nat.h (linux_stop_lwp): New declaration.
2949 2015-03-24 Gary Benson <gbenson@redhat.com>
2951 * linux-nat.h: Include nat/linux-nat.h.
2952 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
2953 * nat/linux-nat.h (struct lwp_info): New forward declaration.
2954 (iterate_over_lwps_ftype): New typedef.
2955 (iterate_over_lwps): New declaration.
2956 * linux-nat.h (iterate_over_lwps): Update comment. Use
2957 iterate_over_lwps_ftype. Update callback return value check.
2959 2015-03-24 Gary Benson <gbenson@redhat.com>
2961 * x86-nat.h (x86_debug_reg_state): Move declaration to...
2962 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
2964 2015-03-24 Gary Benson <gbenson@redhat.com>
2966 * nat/linux-nat.h (current_lwp_ptid): New declaration.
2967 * linux-nat.c (current_lwp_ptid): New function.
2968 * x86-linux-nat.c: Include nat/linux-nat.h.
2969 (x86_linux_dr_get_addr): Use current_lwp_ptid.
2970 (x86_linux_dr_get_control): Likewise.
2971 (x86_linux_dr_get_status): Likewise.
2972 (x86_linux_dr_set_control): Likewise.
2973 (x86_linux_dr_set_addr): Likewise.
2975 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
2977 PR breakpoints/16466
2978 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
2980 2015-03-23 Joel Brobecker <brobecker@adacore.com>
2982 * ser-mingw.c (ser_windows_setparity): Fix indentation.
2983 * ser-unix.c (hardwire_setparity): Likewise.
2985 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
2987 * NEWS: Mention set/show serial parity command.
2988 * monitor.c (monitor_open): Call serial_setparity.
2989 * remote.c (remote_open_1): Likewise.
2990 * ser-base.c (ser_base_serparity): New function.
2991 * ser-base.h (ser_base_setparity): Add declaration.
2992 * ser-go32.c (dos_ops): Set "setparity" field.
2993 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
2995 (ser_windows_setparity): New function.
2996 (hardwire_ops): Add ser_windows_setparity.
2997 (tty_ops): Add NULL for setparity field.
2998 (pipe_ops): Add ser_base_setparity.
2999 (tcp_ops): Likewise.
3000 * ser-pipe.c (pipe_ops): Likewise.
3001 * ser-tcp.c (tcp_ops): Likewise.
3002 * ser-unix.c (hardwire_setparity): Add declaration.
3003 (hardwire_raw): Don't reset PARENB flag.
3004 (hardwire_setparity): New function.
3005 (hardwire_ops): Add hardwire_setparity.
3006 * serial.c (serial_setparity): New function.
3007 (serial_parity): New global.
3008 (parity_none, parity_odd, parity_even, parity_enums, parity):
3010 (set_parity): New function.
3011 (_initialize_serial): Add set/show serial parity commands.
3012 * serial.h (GDBPARITY_NONE): Define.
3013 (GDBPARITY_ODD): Define.
3014 (GDBPARITY_EVEN): Define.
3015 (serial_setparity) Add declaration.
3016 (struct serial_ops): Add setparity field.
3017 * target.h (serial_parity): Add declaration.
3019 2015-03-23 Keith Seitz <keiths@redhat.com>
3021 * linespec.c (linespec_lexer_lex_keyword): Update comment.
3023 2015-03-23 Keith Seitz <keiths@redhat.com>
3025 * breakpoint.c (parse_breakpoint_sals): Use
3026 linespec_lexer_lex_keyword to ascertain if the user specified
3028 * linespec.c [IF_KEYWORD_INDEX]: Define.
3029 (linespec_lexer_lex_keyword): Export.
3030 (struct ls_parser) <keyword_ok>: Remove.
3031 A keyword is only a keyword if not followed by another keyword.
3032 (linespec_lexer_lex_one): Remove keyword_ok handling.
3033 Add comment explaining why the parsing stream is not advanced
3034 when a keyword is seen.
3035 (parse_linespec): Remove parser->keyword_ok.
3036 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
3038 2015-03-23 Keith Seitz <keiths@redhat.com>
3041 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
3042 if we find a static method with DW_AT_vtable_elem_location.
3044 2015-03-21 Eli Zaretskii <eliz@gnu.org>
3046 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
3047 before the second loop, to avoid undefined behavior. Reported by
3048 Anton Blanchard <anton@samba.org>.
3050 2015-03-20 Keven Boell <keven.boell@intel.com>
3052 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
3053 data_location usage to linked list.
3054 (resolve_dynamic_type_internal): Adapt data_location to
3056 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
3057 (copy_type_recursive, copy_type): Add copy of linked list.
3058 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
3059 (struct dynamic_prop_list): New struct.
3060 * dwarf2read.c (set_die_type): Set data_location data.
3062 2015-03-20 Pedro Alves <palves@redhat.com>
3064 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
3065 inner block and make it const.
3066 * machoread.c (get_archive_prefix_len): Make "lparen" const.
3068 2015-03-20 Pedro Alves <palves@redhat.com>
3070 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
3071 * breakpoint.h (set_breakpoint_condition): Update declaration.
3073 2015-03-20 Pedro Alves <palves@redhat.com>
3075 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
3077 2015-03-20 Pedro Alves <palves@redhat.com>
3079 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
3081 2015-03-20 Pedro Alves <palves@redhat.com>
3083 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
3085 2015-03-20 Pedro Alves <palves@redhat.com>
3087 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
3088 (nto_init_solib_absolute_prefix): Likewise.
3090 2015-03-20 Pedro Alves <palves@redhat.com>
3092 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
3093 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
3095 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
3097 * config/djgpp/README: Remove gdb.hp.
3099 2015-03-20 Yao Qi <yao.qi@linaro.org>
3101 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
3102 set_gdbarch_cannot_step_breakpoint.
3104 2015-03-19 Pedro Alves <palves@redhat.com>
3106 * linux-nat.c (linux_resume_one_lwp): Rename to ...
3107 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
3108 instead call perror_with_name.
3109 (check_ptrace_stopped_lwp_gone): New function.
3110 (linux_resume_one_lwp): Reimplement as wrapper around
3111 linux_resume_one_lwp_throw that swallows errors if the LWP is
3113 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
3114 swallows errors if the LWP is gone. Use
3115 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
3117 2015-03-19 Pedro Alves <palves@redhat.com>
3119 * linux-nat.c (status_callback): Return early if the LWP has no
3122 2015-03-19 Pedro Alves <palves@redhat.com>
3124 * linux-nat.c (select_event_lwp_callback): Update comment to no
3125 longer mention SIGTRAP.
3127 2015-03-18 Tristan Gingold <gingold@adacore.com>
3129 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
3130 redirection code to ...
3131 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
3132 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
3134 2015-03-18 Gary Benson <gbenson@redhat.com>
3136 (remote_protocol_features): Remove the "vFile:fstat" feature.
3137 (remote_hostio_fstat): Probe for "vFile:fstat" support.
3139 2015-03-11 Yao Qi <yao.qi@linaro.org>
3142 * aarch64-linux-tdep.c: Include xml-syscall.h
3143 (aarch64_linux_get_syscall_number): New function.
3144 (aarch64_linux_init_abi): Call
3145 set_gdbarch_get_syscall_number.
3146 * syscalls/aarch64-linux.xml: New file.
3148 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
3150 * ser-base.h (ser_base_setstopbits): Change second argument name
3151 from "rate" to "num".
3153 2015-03-17 Gary Benson <gbenson@redhat.com>
3154 Luke Allardyce <lukeallardyce@gmail.com>
3157 * common/common-remote-fileio.h (sys/stat.h): New include.
3158 (stuct stat): Remove forward declaration.
3160 2015-03-16 John Baldwin <jhb@FreeBSD.org>
3162 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
3163 before writing core register notes.
3165 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
3166 Pedro Alves <palves@redhat.com>
3168 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
3169 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
3170 (tgoto): Wrap with extern "C".
3172 2015-03-16 Pedro Alves <palves@redhat.com>
3173 Yuanhui Zhang <asmwarrior@gmail.com>
3175 * stub-termcap.c (tputs): Change prototype.
3177 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
3178 Pedro Alves <palves@redhat.com>
3180 * windows-nat.c (struct thread_info_struct): Rename to ...
3181 (struct windows_thread_info_struct): ... this.
3182 (thread_info): Rename to ...
3183 (windows_thread_info): ... this.
3186 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
3187 Pedro Alves <palves@redhat.com>
3189 * NEWS: New Removed targets and native configurations.
3191 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3194 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
3195 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
3196 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
3197 ia64-hpux-tdep.h, solib-ia64-hpux.h.
3198 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
3199 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
3200 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
3202 * config/ia64/hpux.mh: Remove file.
3203 * config/pa/hpux.mh: Remove file.
3204 * configure: Rebuilt.
3205 * configure.ac (dlgetmodinfo, somread.o): Remove.
3206 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3207 (ia64-*-hpux*): Remove its float format exception.
3208 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3209 * hppa-hpux-nat.c: Remove file.
3210 * hppa-hpux-tdep.c: Remove file.
3211 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
3212 Move them here from hppa-tdep.h
3213 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
3214 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
3215 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
3216 Move them to hppa-tdep.c.
3217 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
3219 * ia64-hpux-nat.c: Remove file.
3220 * ia64-hpux-tdep.c: Remove file.
3221 * ia64-hpux-tdep.h: Remove file.
3222 * inf-ttrace.c: Remove file.
3223 * inf-ttrace.h: Remove file.
3224 * solib-ia64-hpux.c: Remove file.
3225 * solib-ia64-hpux.h: Remove file.
3226 * solib-pa64.c: Remove file.
3227 * solib-pa64.h: Remove file.
3228 * solib-som.c: Remove file.
3229 * solib-som.h: Remove file.
3230 * somread.c: Remove file.
3232 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3234 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
3235 * config.in: Regenerate.
3236 * configure: Regenerate.
3237 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
3239 (fbsd_find_memory_regions): Use kinfo_getvmmap to
3240 enumerate memory regions if present.
3242 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3244 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
3245 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
3247 (i386fbsd_sigtramp_p): Likewise.
3249 2015-03-12 John Baldwin <jhb@FreeBSD.org>
3251 * MAINTAINERS (Write After Approval): Add John Baldwin.
3253 2015-03-12 Gary Benson <gbenson@redhat.com>
3255 * solib.c (_initialize_solib): Make "set/show sysroot" use
3256 add_setshow_optional_filename_cmd so it can be restored to
3257 empty after being set.
3259 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3261 * Makefile.in (SFILES): New source break-catch-syscall.c.
3262 (COMMON_OBS): New object break-catch-syscall.o.
3263 * break-catch-syscall.c: New file.
3264 * breakpoint.c: Remove inclusion of "xml-syscall.h".
3265 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
3266 (struct syscall_catchpoint): Likewise.
3267 (dtor_catch_syscall): Likewise.
3268 (catch_syscall_inferior_data): Likewise.
3269 (struct catch_syscall_inferior_data): Likewise.
3270 (get_catch_syscall_inferior_data): Likewise.
3271 (catch_syscall_inferior_data_cleanup): Likewise.
3272 (insert_catch_syscall): Likewise.
3273 (remove_catch_syscall): Likewise.
3274 (breakpoint_hit_catch_syscall): Likewise.
3275 (print_it_catch_syscall): Likewise.
3276 (print_one_catch_syscall): Likewise.
3277 (print_mention_catch_syscall): Likewise.
3278 (print_recreate_catch_syscall): Likewise.
3279 (catch_syscall_breakpoint_ops): Likewise.
3280 (syscall_catchpoint_p): Likewise.
3281 (create_syscall_event_catchpoint): Likewise.
3282 (catch_syscall_split_args): Likewise.
3283 (catch_syscall_command_1): Likewise.
3284 (is_syscall_catchpoint_enabled): Likewise.
3285 (catch_syscall_enabled): Likewise.
3286 (catching_syscall_number): Likewise.
3287 (catch_syscall_completer): Likewise.
3288 (clear_syscall_counts): Likewise.
3289 (initialize_breakpoint_ops): Move initialization of syscall
3290 catchpoints to break-catch-syscall.c.
3291 (_initialize_breakpoint): Move code related to syscall catchpoints
3292 to break-catch-syscall.c.
3294 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3296 * breakpoint.c (breakpoint_find_if): New function.
3297 * breakpoint.h (breakpoint_find_if): New prototype.
3299 2015-03-11 Gary Benson <gbenson@redhat.com>
3301 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
3302 * remote-fileio.c (remote_fileio_to_host_uint): New function.
3303 (remote_fileio_to_host_ulong): Likewise.
3304 (remote_fileio_to_host_mode): Likewise.
3305 (remote_fileio_to_host_time): Likewise.
3306 (remote_fileio_to_host_stat): Likewise.
3307 * remote.c (PACKET_vFile_fstat): New enum value.
3308 (remote_protocol_features): Register the "vFile:fstat" feature.
3309 (remote_hostio_fstat): New function.
3310 (remote_bfd_iovec_stat): Use the above.
3311 (_initialize_remote): Register new "set/show remote
3312 hostio-fstat-packet" command.
3313 * symfile.c (separate_debug_file_exists): Update comment.
3314 * NEWS: Announce new vFile:fstat packet.
3316 2015-03-11 Gary Benson <gbenson@redhat.com>
3318 * common/common-remote-fileio.h: New file.
3319 * common/common-remote-fileio.c: Likewise.
3320 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
3321 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
3322 (COMMON_OBS): Add common-remote-fileio.o.
3323 (common-remote-fileio.o): New rule.
3324 * remote-fileio.h (common-remote-fileio.h): New include.
3325 * remote-fileio.c (gdb/fileio.h): Do not include.
3326 (remote_fileio_to_be): Moved to common-remote-fileio.h.
3327 (remote_fileio_to_fio_uint): Likewise.
3328 (remote_fileio_to_fio_time): Likewise.
3329 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
3330 (remote_fileio_to_fio_mode): Likewise.
3331 (remote_fileio_to_fio_ulong): Likewise.
3332 (remote_fileio_to_fio_stat): Likewise.
3334 2015-03-11 Andy Wingo <wingo@igalia.com>
3336 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
3337 we were checking the cached type, not the cached dynamic type.
3339 2015-03-11 Andy Wingo <wingo@igalia.com>
3341 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
3342 other strings, as these are on the GC'd heap, and will be
3343 collected along with the smob.
3345 2015-03-11 Andy Wingo <wingo@igalia.com>
3347 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
3348 (objfile_functions): Bind gdbscm_objfile_progspace to
3350 * guile/lib/gdb.scm: Add objfile-progspace to exports.
3352 2015-03-11 Andy Wingo <wingo@igalia.com>
3354 * guile/guile.c (_initialize_guile): Disable automatic
3355 finalization, if Guile offers us that possibility.
3356 * guile/guile.c (call_initialize_gdb_module):
3357 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
3358 finalizers in appropriate places.
3359 * configure.ac (AC_TRY_LIBGUILE): Add a check for
3360 scm_set_automatic_finalization_enabled.
3361 * configure: Regenerated.
3363 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3365 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
3368 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3370 * s390-linux-nat.c (struct arch_lwp_info): New.
3371 (s390_fix_watch_points): Rename to...
3372 (s390_prepare_to_resume): ...this. Skip the PER info update
3373 unless the watch points have changed.
3374 (s390_refresh_per_info, s390_new_thread): New functions.
3375 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
3376 s390_fix_watch_points.
3377 (s390_remove_watchpoint): Likewise.
3378 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
3379 Register s390_prepare_to_resume.
3381 2015-03-09 Pedro Alves <palves@redhat.com>
3384 2015-03-07 Pedro Alves <palves@redhat.com>
3385 * common/gdb_socket.h: New file.
3386 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3388 (net_open): Use union gdb_sockaddr_u.
3390 2015-03-07 Pedro Alves <palves@redhat.com>
3392 * configure.ac (build_warnings): Move -Wmissing-prototypes
3393 -Wdeclaration-after-statement -Wmissing-parameter-type
3394 -Wold-style-declaration -Wold-style-definition to the C-specific
3396 * configure: Regenerate.
3398 2015-03-07 Pedro Alves <palves@redhat.com>
3400 * common/gdb_socket.h: New file.
3401 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3403 (net_open): Use union gdb_sockaddr_u.
3405 2015-03-07 Pedro Alves <palves@redhat.com>
3407 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
3408 (exceptions_state_mc_action_iter)
3409 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3411 [__cplusplus] (try_scope_depth): New global.
3412 [__cplusplus] (exception_try_scope_entry)
3413 (exception_try_scope_exit, gdb_exception_sliced_copy)
3414 (exception_rethrow): New functions.
3415 (throw_exception): In C++ mode, throw
3416 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
3417 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
3418 (throw_it): In C++ mode, use try_scope_depth.
3419 * common/common-exceptions.h [!__cplusplus]
3420 (exceptions_state_mc_action_iter)
3421 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3423 [__cplusplus] (exception_try_scope_entry)
3424 (exception_try_scope_exit, exception_rethrow): Declare.
3425 [__cplusplus] (struct exception_try_scope): New struct.
3426 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
3428 (struct gdb_exception_RETURN_MASK_ALL)
3429 (struct gdb_exception_RETURN_MASK_ERROR)
3430 (struct gdb_exception_RETURN_MASK_QUIT): New types.
3432 2015-03-07 Pedro Alves <palves@redhat.com>
3434 * main.c (handle_command_errors): Remove volatile qualifier from
3437 2015-03-07 Pedro Alves <palves@redhat.com>
3439 * breakpoint.c (save_breakpoints): Adjust to avoid code between
3441 * gdbtypes.c (safe_parse_type): Remove empty line.
3442 (types_deeply_equal):
3443 * guile/scm-frame.c (gdbscm_frame_name):
3444 * linux-thread-db.c (find_new_threads_once):
3445 * python/py-breakpoint.c (bppy_get_commands):
3446 * record-btrace.c (record_btrace_insert_breakpoint)
3447 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
3448 (record_btrace_start_replaying): Adjust to avoid code between TRY
3451 2015-03-07 Pedro Alves <palves@redhat.com>
3453 * common/common-exceptions.c (struct catcher) <exception>: No
3454 longer a pointer to volatile exception. Now an exception value.
3455 <mask>: Delete field.
3456 (exceptions_state_mc_init): Remove all parameters. Adjust.
3457 (exceptions_state_mc): No longer pop the catcher here.
3458 (exceptions_state_mc_catch): New function.
3459 (throw_exception): Adjust.
3460 * common/common-exceptions.h (exceptions_state_mc_init): Remove
3462 (exceptions_state_mc_catch): Declare.
3463 (TRY_CATCH): Rename to ...
3464 (TRY): ... this. Remove EXCEPTION and MASK parameters.
3465 (CATCH, END_CATCH): New.
3466 All callers adjusted.
3468 2015-03-07 Tom Tromey <tromey@redhat.com>
3470 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
3472 2015-03-07 Pedro Alves <palves@redhat.com>
3474 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
3475 (amd64_epilogue_frame_cache): Normal exception handling code.
3476 * break-catch-throw.c (check_status_exception_catchpoint)
3477 (re_set_exception_catchpoint): Ditto.
3478 * cli/cli-interp.c (safe_execute_command):
3479 * cli/cli-script.c (script_from_file): Ditto.
3480 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
3482 * compile/compile-object-run.c (compile_object_run): Ditto.
3483 * cp-abi.c (baseclass_offset): Ditto.
3484 * cp-valprint.c (cp_print_value): Ditto.
3485 * exceptions.c (catch_exceptions_with_msg):
3486 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
3487 * frame.c (get_frame_address_in_block_if_available): Ditto.
3488 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
3489 (i386_sigtramp_frame_cache): Ditto.
3490 * infcmd.c (post_create_inferior): Ditto.
3491 * linespec.c (parse_linespec, find_linespec_symbols):
3492 * p-valprint.c (pascal_object_print_value): Ditto.
3493 * parse.c (parse_expression_for_completion): Ditto.
3494 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
3495 * remote.c (remote_get_noisy_reply): Ditto.
3496 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
3497 * solib-svr4.c (solib_svr4_r_map): Ditto.
3499 2015-03-06 Gary Benson <gbenson@redhat.com>
3501 * common/common-utils.h (startswith): New inline function.
3502 All places where this logic was used updated to use the above.
3504 2015-03-05 Pedro Alves <palves@redhat.com>
3507 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
3508 after reading the breakpoint's shadow memory.
3510 2015-03-05 Mark Kettenis <kettenis@gnu.org>
3512 * hppabsd-nat.c: Remove file.
3513 * hppaobsd-nat.c: New file.
3514 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
3516 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
3519 2015-03-04 Pedro Alves <palves@redhat.com>
3521 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
3522 (target_decr_pc_after_break): Delete declaration.
3523 * target.c (default_target_decr_pc_after_break)
3524 (target_decr_pc_after_break): Delete.
3525 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
3526 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
3527 * linux-thread-db.c (check_event): Likewise.
3528 * infrun.c (adjust_pc_after_break): Likewise.
3529 * darwin-nat.c (cancel_breakpoint): Likewise.
3530 * aix-thread.c (aix_thread_wait): Likewise.
3531 * target-delegates.c: Regenerate.
3533 2015-03-04 Pedro Alves <palves@redhat.com>
3535 * linux-nat.c (save_sigtrap): Check for breakpoints before
3536 checking watchpoints.
3537 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
3538 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
3539 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
3540 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
3541 (linux_nat_stopped_by_sw_breakpoint)
3542 (linux_nat_supports_stopped_by_sw_breakpoint)
3543 (linux_nat_stopped_by_hw_breakpoint)
3544 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
3545 (linux_nat_wait_1): Don't re-increment the PC if relying on
3546 SIGTRAP's siginfo->si_code.
3547 (linux_nat_add_target): Install new target methods.
3548 * linux-thread-db.c (check_event): Don't account for breakpoint PC
3549 offset if the target already adjusted the PC.
3550 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
3551 (GDB_ARCH_TRAP_BRKPT): New.
3552 (TRAP_HWBKPT): Define if not already defined.
3554 2015-03-04 Pedro Alves <palves@redhat.com>
3556 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
3557 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
3559 <stop_reason>: New field.
3560 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
3561 (packet_set_cmd_state): New function.
3562 (remote_protocol_features): Register the "swbreak" and "hwbreak"
3564 (remote_query_supported): If not disabled with the corresponding
3565 "set remote foo-packet" command, report support for the swbreak
3566 and hwbreak features.
3567 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
3569 <stop_reason>: New field.
3570 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
3571 (remote_wait_as): Adjust.
3572 (remote_stopped_by_sw_breakpoint)
3573 (remote_supports_stopped_by_sw_breakpoint)
3574 (remote_stopped_by_hw_breakpoint)
3575 (remote_supports_stopped_by_hw_breakpoint): New functions.
3576 (remote_stopped_by_watchpoint): New function.
3577 (init_remote_ops): Install them.
3578 (_initialize_remote): Register new "set/show remote
3579 swbreak-feature-packet" and "set/show remote
3580 swbreak-feature-packet" commands.
3582 2015-03-04 Pedro Alves <palves@redhat.com>
3584 * btrace.h: Include target/waitstatus.h.
3585 (struct btrace_thread_info) <stop_reason>: New field.
3586 * record-btrace.c (record_btrace_step_thread): Use
3587 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3588 (record_btrace_decr_pc_after_break): Delete.
3589 (record_btrace_stopped_by_sw_breakpoint)
3590 (record_btrace_supports_stopped_by_sw_breakpoint)
3591 (record_btrace_stopped_by_hw_breakpoint)
3592 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
3593 (init_record_btrace_ops): Install them.
3594 * record-full.c (record_full_hw_watchpoint): Delete and replace
3596 (record_full_stop_reason): ... this throughout.
3597 (record_full_exec_insn): Adjust.
3598 (record_full_wait_1): Adjust. No longer re-increment the PC.
3599 (record_full_wait_1): Adjust. Use
3600 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3601 (record_full_stopped_by_watchpoint): Adjust.
3602 (record_full_stopped_by_sw_breakpoint)
3603 (record_full_supports_stopped_by_sw_breakpoint)
3604 (record_full_supports_stopped_by_sw_breakpoint)
3605 (record_full_stopped_by_hw_breakpoint)
3606 (record_full_supports_stopped_by_hw_breakpoint): New functions.
3607 (init_record_full_ops, init_record_full_core_ops): Install them.
3608 * record.c (record_check_stopped_by_breakpoint): New function.
3609 * record.h: Include target/waitstatus.h.
3610 (record_check_stopped_by_breakpoint): New declaration.
3612 2015-03-04 Pedro Alves <palves@redhat.com>
3614 enum lwp_stop_reason -> enum target_stop_reason
3615 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
3616 (linux_nat_stopped_by_watchpoint, status_callback)
3617 (linux_nat_wait_1): Adjust.
3618 * linux-nat.h (enum lwp_stop_reason): Delete.
3619 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
3620 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
3621 * target/waitstatus.h (enum target_stop_reason): New.
3623 2015-03-04 Pedro Alves <palves@redhat.com>
3625 * breakpoint.c (need_moribund_for_location_type): New function.
3626 (bpstat_stop_status): Don't skipping checking moribund locations
3627 of breakpoint types which the target tell caused a stop.
3628 (program_breakpoint_here_p): New function, factored out from ...
3629 (bp_loc_is_permanent): ... this.
3630 (update_global_location_list): Don't create a moribund location if
3631 the target supports reporting stops of the type of the removed
3633 * breakpoint.h (program_breakpoint_here_p): New declaration.
3634 * infrun.c (adjust_pc_after_break): Return early if the target has
3635 already adjusted the PC. Add comments.
3636 (handle_signal_stop): If nothing explains a signal, and the target
3637 tells us the stop was caused by a software breakpoint, check if
3638 there's a breakpoint instruction in the memory. If so, adjust the
3639 PC before presenting the stop to the user. Otherwise, ignore the
3640 trap. If nothing explains a signal, and the target tells us the
3641 stop was caused by a hardware breakpoint, ignore the trap.
3642 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
3643 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
3644 to_supports_stopped_by_hw_breakpoint>: New fields.
3645 (target_stopped_by_sw_breakpoint)
3646 (target_supports_stopped_by_sw_breakpoint)
3647 (target_stopped_by_hw_breakpoint)
3648 (target_supports_stopped_by_hw_breakpoint): Define.
3649 * target-delegates.c: Regenerate.
3651 2015-03-04 Pedro Alves <palves@redhat.com>
3653 * infrun.c (follow_fork_inferior): Use the whole of the
3654 inferior_ptid and pending_follow.related_pid ptids instead of
3655 building ptids from the process components. Adjust verbose output
3656 to use target_pid_to_str.
3657 * linux-nat.c (linux_child_follow_fork): Use the whole of the
3658 inferior_ptid and pending_follow.related_pid ptids instead of
3659 building ptids from the process components.
3661 2015-03-04 Mark Kettenis <kettenis@gnu.org>
3663 * inf-ptrace.c [PT_GET_PROCESS_STATE]
3664 (inf_ptrace_insert_fork_catchpoint): New function.
3665 (inf_ptrace_remove_fork_catchpoint): New function.
3666 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
3668 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3670 * s390-linux-tdep.c (s390_register_name): Return empty string
3671 instead of NULL for registers that shouldn't be visible.
3673 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3675 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
3676 XML file for 64-bit targets.
3678 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
3680 * target.h (find_default_create_inferior): Remove declaration.
3681 (find_default_attach): Likewise.
3683 2015-03-03 Pedro Alves <palves@redhat.com>
3685 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
3686 Use ptid_get_pid to get the overall process id when resuming all
3689 2015-03-03 Pedro Alves <palves@redhat.com>
3691 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
3692 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
3693 * inf-ptrace.c (get_ptrace_pid): New function.
3694 (inf_ptrace_resume): Use it.
3695 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
3698 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3700 * nat/linux-btrace.c: Include sys/utsname.h.
3701 (linux_determine_kernel_ptr_bits): New.
3702 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
3703 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
3706 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3708 * btrace.c (ftrace_update_function): Treat return as tailcall for
3709 "_dl_runtime_resolve".
3711 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3713 * btrace.h (btrace_function) <lbegin, lend>: Remove.
3714 * btrace.c (ftrace_debug): Do not print the line range.
3715 (ftrace_skip_file, ftrace_update_lines): Remove.
3716 (ftrace_new_function): Remove lbegin and lend initialization.
3717 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
3718 * record-btrace.c (btrace_compute_src_line_range): New.
3719 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
3721 2015-03-02 Pedro Alves <palves@redhat.com>
3723 * infrun.c (follow_exec): Delete all threads of the process except
3724 the event thread. Extended comments.
3726 2015-03-02 Joel Brobecker <brobecker@adacore.com>
3728 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
3730 2015-03-02 Joel Brobecker <brobecker@adacore.com>
3732 * utils.h: Remove <stdbool.h> #include.
3733 (producer_is_gcc): Change return type to "int".
3734 * utils.c (producer_is_gcc): Change return type to int.
3735 Return 1 instead of true, and 0 instead of false.
3736 Adjust function documentation accordingly.
3738 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
3740 * s390-linux-nat.c (have_regset_vxrs): New static variable.
3741 (s390_linux_fetch_inferior_registers): Handle vector registers, if
3743 (s390_linux_store_inferior_registers): Likewise.
3744 (s390_get_hwcap): Remove function. Embed its logic...
3745 (s390_read_description): ...here. Yield a target description with
3746 vector registers if applicable.
3747 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
3748 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
3749 "features/s390x-tevx-linux64.c".
3750 (struct gdbarch_tdep) <v0_full_regnum>: New field.
3751 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
3752 for "GNU/Linux-specific registers".
3753 (s390_dwarf_reg_r0l): New enum value.
3754 (s390_dwarf_reg_to_regnum): Support vector registers.
3755 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
3756 of GPR lower halves.
3757 (regnum_is_vxr_full): New function.
3758 (s390_register_name): New function.
3759 (s390_pseudo_register_name): Handle v0-v15, which are composed of
3760 f0-f15 and v0l-v15l.
3761 (s390_pseudo_register_type): Likewise.
3762 (s390_pseudo_register_read): Likewise.
3763 (s390_pseudo_register_write): Likewise.
3764 (s390_value_from_register): Account for the fact that values are
3765 placed left-justified in vector registers.
3766 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
3767 the vector reggroup and omit them from the general reggroup.
3768 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
3769 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
3770 (s390_iterate_over_regset_sections): Add iterations for the two
3772 (s390_core_read_description): Yield a target description with
3773 vector registers if applicable.
3774 (s390_gdbarch_init): Handle target descriptions with vector
3775 registers. Add "register_name" gdbarch method.
3776 (_initialize_s390_tdep): Call new tdesc initialization functions.
3777 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
3778 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
3779 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
3780 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
3781 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
3782 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
3783 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
3784 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
3785 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
3786 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
3787 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
3788 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
3789 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
3790 (S390_NUM_REGS): Adjust value.
3791 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
3792 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
3793 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
3794 * NEWS: Announce S/390 vector register support.
3796 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
3798 * features/s390-tevx-linux64.xml: New file.
3799 * features/s390-vx-linux64.xml: New file.
3800 * features/s390-vx.xml: New file.
3801 * features/s390x-tevx-linux64.xml: New file.
3802 * features/s390x-vx-linux64.xml: New file.
3803 * features/Makefile (WHICH): Add s390-vx-linux64,
3804 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
3805 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
3806 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
3808 * features/s390-tevx-linux64.c: New generated file.
3809 * features/s390-vx-linux64.c: Likewise.
3810 * features/s390x-tevx-linux64.c: Likewise.
3811 * features/s390x-vx-linux64.c: Likewise.
3812 * regformats/s390-tevx-linux64.dat: Likewise.
3813 * regformats/s390-vx-linux64.dat: Likewise.
3814 * regformats/s390x-tevx-linux64.dat: Likewise.
3815 * regformats/s390x-vx-linux64.dat: Likewise.
3817 2015-02-28 Doug Evans <xdje42@gmail.com>
3819 * symtab.h (struct symtab) <next>: Fix comment.
3821 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
3823 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
3826 2015-02-27 Pedro Alves <palves@redhat.com>
3828 * dtrace-probe.c (dtrace_probe_ops): Make extern.
3830 2015-02-27 Pedro Alves <palves@redhat.com>
3832 * common/common-exceptions.h (exception_none): Declare.
3833 * common/common-exceptions.c (exception_none): Moved from
3835 (exceptions_state_mc_init): Use exception_none.
3836 * exceptions.c (exception_none): Move to
3837 common/common-exceptions.c.
3838 * exceptions.h (exception_none): Move to
3839 common/common-exceptions.h.
3841 2015-02-27 Pedro Alves <palves@redhat.com>
3843 * main.c (catch_command_errors, catch_command_errors_const):
3844 Remove 'mask' argument. Adjust.
3845 (captured_main): Adjust callers.
3847 2015-02-27 Pedro Alves <palves@redhat.com>
3849 * python/python-internal.h: Include "extension-priv.h".
3851 2015-02-27 Pedro Alves <palves@redhat.com>
3853 * breakpoint.h (enum print_stop_action): Move further up in the
3856 2015-02-27 Pedro Alves <palves@redhat.com>
3858 * gdbarch.sh: Include regcache.h.
3859 * gdbarch.h: Regenerate.
3861 2015-02-27 Pedro Alves <palves@redhat.com>
3863 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
3864 Remove duplicate const.
3865 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
3868 2015-02-27 Pedro Alves <palves@redhat.com>
3870 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
3871 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
3872 * features/feature_to_c.sh: Tag the generated xml_builtin array
3873 with extern const in C++ mode.
3875 2015-02-27 Tom Tromey <tromey@redhat.com>
3877 * minidebug.c (struct lzma_stream): Rename to ...
3878 (struct gdb_lzma_stream): ... this.
3879 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
3881 2015-02-27 Pedro Alves <palves@redhat.com>
3883 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
3885 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
3886 (mi_cmd_stack_list_variables): Use it.
3888 2015-02-27 Pedro Alves <palves@redhat.com>
3890 * x86-linux-nat.c (u_debugreg_offset): New function.
3891 (x86_linux_dr_get, x86_linux_dr_set): Use it.
3893 2015-02-27 Pedro Alves <palves@redhat.com>
3895 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
3897 Include break-common.h.
3899 2015-02-27 Tom Tromey <tromey@redhat.com>
3900 Pedro Alves <palves@redhat.com>
3902 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
3903 local used to iterate over enums.
3904 * completer.c (signal_completer): Likewise.
3905 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
3906 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
3907 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
3908 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
3909 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
3910 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
3911 * tui-wingeneral.c (tui_refresh_all): Likewise.
3913 2015-02-27 Pedro Alves <palves@redhat.com>
3915 * target.h: Include "infrun.h".
3917 2015-02-27 Pedro Alves <palves@redhat.com>
3919 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
3921 2015-02-27 Pedro Alves <palves@redhat.com>
3923 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
3925 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
3927 2015-02-27 Pedro Alves <palves@redhat.com>
3929 * cli-out.c (_rl_erase_entire_line): Move declaration out of
3930 cli_mld_erase_entire_line, and make it extern "C".
3931 * common/common-defs.h (EXTERN_C): New.
3932 * completer.c (_rl_completion_prefix_display_length)
3933 (_rl_print_completions_horizontally, QSFUNC): Move declarations
3934 out of gdb_display_match_list_1.
3935 (_rl_qsort_string_compare): Move declaration out of
3936 gdb_display_match_list_1, and make it extern "C".
3937 * defs.h (re_comp): Use EXTERN_C.
3938 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
3939 and make it extern "C".
3940 (monstartup): Move declaration out of maintenance_set_profile_cmd,
3941 and make it extern "C".
3942 (main): Move declaration out of maintenance_set_profile_cmd.
3943 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
3946 2015-02-27 Pedro Alves <palves@redhat.com>
3948 * python/python.c (GdbMethods): Rename to ...
3949 (python_GdbMethods): ... this and make extern.
3950 (GdbModuleDef): Rename to ...
3951 (python_GdbModuleDef): ... this and make extern.
3953 2015-02-27 Pedro Alves <palves@redhat.com>
3955 * record-btrace.c (set_record_btrace_cmdlist)
3956 (show_record_btrace_cmdlist): Remove redefinitions.
3958 2015-02-27 Tom Tromey <tromey@redhat.com>
3959 Pedro Alves <palves@redhat.com>
3961 * dwarf2-frame.c (enum cfa_how_kind, struct
3962 dwarf2_frame_state_reg_info): Move out of struct
3964 * dwarf2read.c (struct tu_stats): Move out of struct
3966 (struct file_entry): Move out of struct line_header.
3967 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
3968 typedef_field_list): Move out of struct field_info.
3969 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
3970 Move out of struct dynamic_prop.
3971 (union type_owner, union field_location, struct field, struct
3972 range_bounds, union type_specific): Move out of struct main_type.
3973 (struct fn_fieldlist, struct fn_field, struct typedef_field)
3974 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
3975 (struct call_site_target, union call_site_parameter_u, struct
3976 call_site_parameter): Move out of struct call_site.
3977 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
3979 (enum srcdest_kind): Move out of struct srcdest.
3980 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
3981 * prologue-value.h (enum prologue_value_kind): Move out of struct
3983 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
3985 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
3986 out of struct field_info.
3987 * symfile.h (struct other_sections): Move out of struct
3989 * symtab.c (struct symbol_cache_slot): Move out struct
3991 * target-descriptions.c (enum tdesc_type_kind): Move out of
3992 typedef struct tdesc_type.
3993 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
3994 struct tui_line_or_address.
3995 * value.c (enum internalvar_kind, union internalvar_data): Move
3996 out of struct internalvar.
3997 * xtensa-tdep.h (struct ctype_cache): Move out of struct
4000 2015-02-27 Tom Tromey <tromey@redhat.com>
4001 Pedro Alves <palves@redhat.com>
4003 Rename symbols whose names are reserved C++ keywords throughout.
4005 2015-02-27 Pedro Alves <palves@redhat.com>
4007 * Makefile.in (COMPILER): New, get it from autoconf.
4008 (COMPILE.pre, CC_LD): Use COMPILER.
4009 (CXX): Get from autoconf instead.
4010 (CXX_FOR_TARGET): Default to g++ instead of gcc.
4011 * acinclude.m4: Include build-with-cxx.m4.
4012 * build-with-cxx.m4: New file.
4013 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
4014 Disable -Werror by default if building in C++ mode.
4015 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
4016 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
4017 Run supported-warning-flags tests with the C++ compiler.
4018 Save/restore CXXFLAGS too.
4019 * configure: Regenerate.
4021 2015-02-27 Pedro Alves <palves@redhat.com>
4023 * libiberty.m4: New file.
4024 * acinclude.m4: Include libiberty.m4.
4025 * configure.ac: Call libiberty_INIT.
4026 * config.in, configure: Regenerate.
4028 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
4030 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
4031 31-bit targets, but 64-bit targets as well.
4032 (s390_gnu_triplet_regexp): New function.
4033 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
4034 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
4037 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
4039 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
4040 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
4041 from CONTEXT_DEBUGGER.
4043 2015-02-26 Doug Evans <dje@google.com>
4045 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
4047 (set_type_vptr_fieldno): Ditto.
4048 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
4049 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
4051 2015-02-26 Pedro Alves <palves@redhat.com>
4053 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
4054 * complaints.c (vcomplaint): Pass argument FMT directly to
4055 printf-like functions instead of complaint->fmt.
4056 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
4057 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
4058 * compile/compile-loc2c.c (pushf, unary, binary): Add
4060 (do_compile_dwarf_expr_to_c): Pass string literal as format string
4062 (BINARY): Pass string literal as format string to 'binary'.
4063 * compile/compile-object-load.c (link_callbacks_einfo): Add
4065 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
4067 2015-02-26 Pedro Alves <palves@redhat.com>
4069 * windows-termcap.c: Rename to ...
4070 * stub-termcap.c: ... this. Adjust header line.
4071 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
4073 * configure: Regenerate.
4074 * configure.ac: Refer to stub-termcap.o instead of
4076 * gdb_curses.h: Mention stub-termcap.c instead of
4079 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
4081 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
4082 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
4084 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
4086 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
4088 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
4090 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
4091 bfd_canonicalize_symtab.
4093 2015-02-25 John Baldwin <jhb@FreeBSD.org>
4095 * amd64fbsd-nat.c: Include sys/user.h.
4096 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
4097 instead of KERN_PS_STRINGS to locate the signal trampoline.
4098 * i386fbsd-nat.c: Include sys/user.h.
4099 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
4100 instead of KERN_PS_STRINGS to locate the signal trampoline.
4101 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
4102 (amd64fbsd_sigtramp_p): New.
4103 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
4104 longer set default values.
4105 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
4106 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
4107 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
4108 (i386fbsd_freebsd4_sigtramp_start)
4109 (i386fbsd_freebsd4_sigtramp_middle)
4110 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
4111 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
4112 (i386fbsd_sigtramp_p): New.
4113 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
4114 longer set default values.
4115 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
4117 2015-02-25 John Baldwin <jhb@freebsd.org>
4119 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
4120 get_frame_register instead of frame_unwind_register_unsigned.
4122 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
4125 * compile/compile-c-support.c (c_compute_program): Change // comment.
4126 * compile/compile-object-load.c (setup_sections): Change // comment.
4128 2015-02-26 Joel Brobecker <brobecker@adacore.com>
4131 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
4133 2015-02-23 Pedro Alves <palves@redhat.com>
4135 * remote.c (skip_to_semicolon): New function.
4136 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
4137 special case the stop reasons that look like hex numbers
4138 upfront. Instead handle real register numbers after matching
4139 all the known stop reasons.
4141 2015-02-21 Doug Evans <dje@google.com>
4143 PR c++/17976, symtab/17821
4144 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
4145 is_in_anonymous. All callers updated.
4146 (find_symbol_in_baseclass): Ditto.
4147 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
4148 for symbols in an anonymous namespace.
4149 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
4150 DW_AT_name directly.
4151 (dwarf2_name): Convert missing namespace name to
4152 CP_ANONYMOUS_NAMESPACE_STR.
4154 2015-02-20 Pedro Alves <palves@redhat.com>
4156 * linux-nat.c (linux_handle_extended_wait): Call
4157 thread_db_notice_clone whenever a new clone LWP is detected.
4158 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
4160 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
4161 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
4162 (linux_unstop_all_lwps): Declare.
4163 * linux-thread-db.c (struct thread_get_info_inout): Delete.
4164 (thread_get_info_callback): Delete.
4165 (thread_from_lwp): Use td_thr_get_info and record_thread.
4166 (thread_db_attach_lwp): Delete.
4167 (thread_db_notice_clone): New function.
4168 (try_thread_db_load_1): If /proc is mounted and shows the
4169 process'es task list, walk over all LWPs and call thread_from_lwp
4170 instead of relying on td_ta_thr_iter.
4171 (attach_thread): Don't call check_thread_signals here. Split the
4172 tail part of the function (which adds the thread to the core GDB
4174 (record_thread): ... this function. Call check_thread_signals
4176 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
4177 call thread_from_lwp.
4178 (thread_db_update_thread_list): Rename to ...
4179 (thread_db_update_thread_list_org): ... this.
4180 (thread_db_update_thread_list): New function.
4181 (thread_db_find_thread_from_tid): Delete.
4182 (thread_db_get_ada_task_ptid): Simplify.
4183 * nat/linux-procfs.c: Include <sys/stat.h>.
4184 (linux_proc_task_list_dir_exists): New function.
4185 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
4187 2015-02-20 Pedro Alves <palves@redhat.com>
4189 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
4190 main LWP. Handle the case of waitpid returning 0 if we're already
4191 attached to the LWP. Don't set the LWP's last_resume_kind to
4192 resume_stop if we already knew about the LWP.
4193 (linux_nat_filter_event): Add debug logs.
4195 2015-02-20 Pedro Alves <palves@redhat.com>
4197 * target.h (forward_target_decr_pc_after_break): Delete
4200 2015-02-20 Pedro Alves <palves@redhat.com>
4203 * linux-thread-db.c (thread_get_info_callback): Return early if
4204 the thread's lwp id is -1.
4206 2015-02-20 Joel Brobecker <brobecker@adacore.com>
4210 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
4212 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
4213 (dtrace_get_probes) Change type of variable 'dof'.
4215 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
4217 PR breakpoints/16812
4218 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
4219 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
4220 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
4222 2015-02-19 David Taylor <dtaylor@emc.com>
4224 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
4226 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
4228 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
4230 (tui_putc): Don't call tui_handle_resize_during_io.
4231 (tui_getc): Likewise.
4232 (tui_mld_getc): Likewise.
4233 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
4234 (tui_sigwinch_token): New static variable.
4235 (tui_initialize_win): Adjust documentation. Set
4237 (tui_async_resize_screen): New asynchronous callback.
4238 (tui_sigwinch_handler): Adjust documentation. Asynchronously
4239 invoke tui_async_resize_screen.
4241 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
4243 * configure: Regenerated.
4244 * configure.ac: Use GDB_AC_TRANSFORM.
4245 * Makefile.in (aclocal_m4_deps): Added transform.m4.
4246 * acinclude.m4: sinclude transform.m4.
4247 * transform.m4: New file.
4248 (GDB_AC_TRANSFORM): New macro.
4250 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4252 * NEWS: Announce the support for DTrace SDT probes.
4254 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4256 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
4257 (amd64_dtrace_parse_probe_argument): New function.
4258 (amd64_dtrace_probe_is_enabled): Likewise.
4259 (amd64_dtrace_enable_probe): Likewise.
4260 (amd64_dtrace_disable_probe): Likewise.
4261 (amd64_linux_init_abi): Register the
4262 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
4263 `gdbarch_dtrace_disable_probe' and
4264 `gdbarch_dtrace_probe_is_enabled' hooks.
4265 (amd64_dtrace_disabled_probe_sequence_1): New constant.
4266 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
4267 (amd64_dtrace_enable_probe_sequence): Likewise.
4268 (amd64_dtrace_disable_probe_sequence): Likewise.
4270 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4272 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
4273 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
4274 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
4276 * Makefile.in (SFILES): dtrace-probe.c added.
4277 * configure: Regenerate.
4278 * dtrace-probe.c: New file.
4279 (SHT_SUNW_dof): New constant.
4280 (dtrace_probe_type): New enum.
4281 (dtrace_probe_arg): New struct.
4282 (dtrace_probe_arg_s): New typedef.
4283 (struct dtrace_probe_enabler): New struct.
4284 (dtrace_probe_enabler_s): New typedef.
4285 (dtrace_probe): New struct.
4286 (dtrace_probe_is_linespec): New function.
4287 (dtrace_dof_sect_type): New enum.
4288 (dtrace_dof_dofh_ident): Likewise.
4289 (dtrace_dof_encoding): Likewise.
4290 (DTRACE_DOF_ENCODE_LSB): Likewise.
4291 (DTRACE_DOF_ENCODE_MSB): Likewise.
4292 (dtrace_dof_hdr): New struct.
4293 (dtrace_dof_sect): Likewise.
4294 (dtrace_dof_provider): Likewise.
4295 (dtrace_dof_probe): Likewise.
4296 (DOF_UINT): New macro.
4297 (DTRACE_DOF_PTR): Likewise.
4298 (DTRACE_DOF_SECT): Likewise.
4299 (dtrace_process_dof_probe): New function.
4300 (dtrace_process_dof): Likewise.
4301 (dtrace_build_arg_exprs): Likewise.
4302 (dtrace_get_arg): Likewise.
4303 (dtrace_get_probes): Likewise.
4304 (dtrace_get_probe_argument_count): Likewise.
4305 (dtrace_can_evaluate_probe_arguments): Likewise.
4306 (dtrace_evaluate_probe_argument): Likewise.
4307 (dtrace_compile_to_ax): Likewise.
4308 (dtrace_probe_destroy): Likewise.
4309 (dtrace_gen_info_probes_table_header): Likewise.
4310 (dtrace_gen_info_probes_table_values): Likewise.
4311 (dtrace_probe_is_enabled): Likewise.
4312 (dtrace_probe_ops): New variable.
4313 (info_probes_dtrace_command): New function.
4314 (_initialize_dtrace_probe): Likewise.
4315 (dtrace_type_name): Likewise.
4317 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4319 * gdbarch.sh (dtrace_parse_probe_argument): New.
4320 (dtrace_probe_is_enabled): Likewise.
4321 (dtrace_enable_probe): Likewise.
4322 (dtrace_disable_probe): Likewise.
4323 * gdbarch.c: Regenerate.
4324 * gdbarch.h: Regenerate.
4326 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4328 * stap-probe.c (stap_probe_ops): Add NULLs in the static
4329 stap_probe_ops for `enable_probe' and `disable_probe'.
4330 * probe.c (enable_probes_command): New function.
4331 (disable_probes_command): Likewise.
4332 (_initialize_probe): Define the cli commands `enable probe' and
4334 (parse_probe_linespec): New function.
4335 (info_probes_for_ops): Use parse_probe_linespec.
4336 * probe.h (probe_ops): New hooks `enable_probe' and
4339 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4341 * probe.c (compute_probe_arg): Moved from stap-probe.c
4342 (compile_probe_arg): Likewise.
4343 (probe_funcs): Likewise.
4344 * stap-probe.c (compute_probe_arg): Moved to probe.c.
4345 (compile_probe_arg): Likewise.
4346 (probe_funcs): Likewise.
4348 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4350 * probe.c (print_ui_out_not_applicables): New function.
4351 (exists_probe_with_pops): Likewise.
4352 (info_probes_for_ops): Do not include column headers for probe
4353 types for which no probe has been actually found on any object.
4354 Also invoke `print_ui_out_not_applicables' in order to match the
4355 column rows with the header when probes of several types are
4357 Print the "Type" column.
4358 * probe.h (probe_ops): Added a new probe operation `type_name'.
4359 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
4360 (stap_type_name): New function.
4362 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
4364 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
4365 (key_is_command_char): Delete.
4367 2015-02-17 Pedro Alves <palves@redhat.com>
4369 * tui/tui.c (tui_enable): Resize windows before anything
4370 might show a window.
4372 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
4375 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
4376 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
4378 * aarch64-tdep.h (tdesc_aarch64): Declare.
4380 2015-02-12 Mark Wielaard <mjw@redhat.com>
4382 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
4384 2015-02-13 Doug Evans <dje@google.com>
4386 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
4387 anonymous_namespace to is_in_anonymous for consistency with the rest
4389 (cp_lookup_bare_symbol): Fix typo in comment.
4390 (cp_search_static_and_baseclasses): Ditto.
4391 (search_symbol_list): Use vertical space in comment better.
4392 (reset_directive_searched): Ditto. Fix typo.
4393 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
4395 2015-02-13 Yao Qi <yao.qi@arm.com>
4397 * MAINTAINERS: Update my email address.
4399 2015-02-12 Doug Evans <dje@google.com>
4401 * symtab.c (completion_list_add_name): Fix memory leak.
4403 2015-02-12 Doug Evans <dje@google.com>
4405 * completer.c (complete_line): Remove incorrect comment.
4407 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4409 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
4410 (py_print_frame): Use RETURN_MASK_ERROR.
4412 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4414 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
4415 function comment. Wrap all function that can throw in cleanups.
4416 (gdbpy_apply_frame_filter): Wrap all function that can throw in
4419 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4421 * python/py-framefilter.c (py_print_frame): Substitute goto error.
4422 Remove the error label.
4424 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4426 * python/py-framefilter.c (py_print_frame): Put conditional code paths
4427 with goto first, indent the former else codepath left. Put variable
4428 'elided' to a new inner block.
4430 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4432 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
4434 2015-02-11 Pedro Alves <palves@redhat.com>
4436 * xcoffread.c (within_function): Delete.
4438 2015-02-11 Tom Tromey <tromey@redhat.com>
4439 Pedro Alves <palves@redhat.com>
4441 * breakpoint.c (base_breakpoint_ops): Delete.
4442 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
4443 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
4444 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
4445 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
4446 * python/py-arch.c (arch_object_type): Make extern.
4447 * python/py-block.c (block_syms_iterator_object_type): Make extern.
4448 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
4449 * python/py-cmd.c (cmdpy_object_type): Make extern.
4450 * python/py-continueevent.c (continue_event_object_type)
4451 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
4452 parameter. Update all callers.
4453 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
4454 * python/py-exitedevent.c (exited_event_object_type): Make extern.
4455 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
4456 * python/py-function.c (fnpy_object_type): Make extern.
4457 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
4458 * python/py-infevents.c (call_pre_event_object_type)
4459 (inferior_call_post_event_object_type).
4460 (memory_changed_event_object_type): Make extern.
4461 * python/py-infthread.c (thread_object_type): Make extern.
4462 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
4463 * python/py-linetable.c (linetable_entry_object_type)
4464 (linetable_object_type, ltpy_iterator_object_type): Make extern.
4465 * python/py-newobjfileevent.c (new_objfile_event_object_type)
4466 (clear_objfiles_event_object_type): Make extern.
4467 * python/py-objfile.c (objfile_object_type): Make extern.
4468 * python/py-param.c (parmpy_object_type): Make extern.
4469 * python/py-progspace.c (pspace_object_type): Make extern.
4470 * python/py-signalevent.c (signal_event_object_type): Make extern.
4471 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
4472 * python/py-type.c (type_object_type, field_object_type)
4473 (type_iterator_object_type): Make extern.
4474 * python/python.c (python_extension_script_ops)
4475 (python_extension_ops): Make extern.
4476 * stap-probe.c (stap_probe_ops): Make extern.
4478 2015-02-11 Pedro Alves <pedro@codesourcery.com>
4480 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
4481 because the event thread is not the current thread.
4483 2015-02-11 Doug Evans <xdje42@gmail.com>
4485 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
4486 been initialized yet, return NULL.
4488 2015-02-11 Doug Evans <dje@google.com>
4490 * symfile.h (new_symfile_objfile): Delete.
4491 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
4492 All callers updated.
4494 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
4496 * tui/tui-io.c (tui_handle_resize_during_io): Call
4497 tui_update_gdb_sizes() after resizing the screen.
4498 * tui/tui.c (tui_enable): Resize the terminal before
4499 calling tui_update_gdb_sizes().
4501 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
4503 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
4504 line before printing a newline.
4506 2015-02-11 Mark Wielaard <mjw@redhat.com>
4508 * utils.c (producer_is_gcc): Return true or false.
4510 2015-02-10 Mark Wielaard <mjw@redhat.com>
4512 * utils.h (producer_is_gcc): Change return type to bool. Add major
4514 * utils.c (producer_is_gcc): Likewise.
4515 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
4516 * dwarf2read.c (check_producer): Likewise.
4518 2015-02-10 Pedro Alves <palves@redhat.com>
4520 * infrun.c (displaced_step_fixup): Switch to the event thread
4521 before calling gdbarch_displaced_step_fixup.
4523 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
4525 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
4527 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
4529 * ada-varobj.c (ada_name_of_child): Constify parent.
4530 (ada_path_expr_of_child): Same.
4531 (ada_value_of_child): Same.
4532 (ada_type_of_child): Same.
4533 * c-varobj.c (c_is_path_expr_parent): Same.
4534 (c_describe_child): Same.
4535 (c_name_of_child): Same.
4536 (c_value_of_child): Same.
4537 (c_type_of_child): Same.
4538 (cplus_number_of_children): Same.
4539 (cplus_describe_child): Constify var.
4540 (cplus_name_of_child): Constify parent.
4541 (cplus_value_of_child): Same.
4542 (cplus_type_of_child): Same.
4543 * jv-varobj.c (java_name_of_child): Same.
4544 (java_value_of_child): Same.
4545 (java_type_of_child): Same.
4546 * varobj.c (value_of_child): Same.
4547 (varobj_default_is_path_expr_parent): Constify var, parent and return
4549 (varobj_get_path_expr): Constify var, modify path_expr through
4551 (install_new_value): Constify parent.
4552 (value_of_child): Constify parent.
4553 * varobj.h (struct varobj): Constify parent.
4554 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
4556 (varobj_get_path_expr): Constify var.
4557 (varobj_get_path_expr_parent): Constify var and return value.
4559 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
4561 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
4562 (arm_prologue_this_id): Move PC and SP limit checks to
4563 arm_prologue_unwind_stop_reason.
4564 (arm_prologue_unwind) <stop_reason> : Set to
4565 arm_prologue_unwind_stop_reason.
4567 2015-02-09 Mark Wielaard <mjw@redhat.com>
4569 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
4570 DW_LANG_Fortran08 as language_fortran.
4572 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
4575 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
4576 of pointer against char.
4578 2015-02-09 Mark Wielaard <mjw@redhat.com>
4580 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
4581 (c_type_print_modifier): Likewise.
4582 * dwarf2read.c (read_tag_atomic_type): New function.
4583 (read_type_die_1): Handle DW_TAG_atomic_type.
4584 * gdbtypes.c (make_atomic_type): New function.
4585 (recursive_dump_type): Handle TYPE_ATOMIC.
4586 * gdbtypes.h (enum type_flag_values): Renumber.
4587 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
4588 (TYPE_ATOMIC): New macro.
4589 (make_atomic_type): Declare.
4591 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4593 * btrace.c (ftrace_find_call): Skip gaps.
4594 (ftrace_new_function): Initialize level.
4595 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
4596 (ftrace_new_switch): Update
4598 (ftrace_new_gap): New.
4599 (ftrace_update_function): Create new function after gap.
4600 (btrace_compute_ftrace_bts): Create gap on error.
4601 (btrace_stitch_bts): Update parameters. Clear trace if it
4603 (btrace_stitch_trace): Update parameters. Update callers.
4604 (btrace_clear): Reset the number of gaps.
4605 (btrace_insn_get): Return NULL if the iterator points to a gap.
4606 (btrace_insn_number): Return zero if the iterator points to a gap.
4607 (btrace_insn_end): Allow gaps at the end.
4608 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
4609 (btrace_find_insn_by_number): Assert that the found iterator does
4611 (btrace_call_next, btrace_call_prev): Assert that the last function
4613 * btrace.h (btrace_bts_error): New.
4614 (btrace_function): Update comment.
4615 (btrace_function) <insn, insn_offset, number>: Update comment.
4616 (btrace_function) <errcode>: New.
4617 (btrace_thread_info) <ngaps>: New.
4618 (btrace_thread_info) <replay>: Update comment.
4619 (btrace_insn_get): Update comment.
4620 * record-btrace.c (btrace_ui_out_decode_error): New.
4621 (record_btrace_info): Print number of gaps.
4622 (btrace_insn_history, btrace_call_history): Call
4623 btrace_ui_out_decode_error for gaps.
4624 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
4626 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4628 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
4629 * nat/linux-btrace.c: (btrace_this_cpu): New.
4630 (cpu_supports_bts): Call btrace_this_cpu.
4631 (intel_supports_bts): Add cpu parameter.
4633 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4635 * btrace.h (btrace_insn_class): New.
4636 (btrace_insn) <size, iclass>: New.
4637 * btrace.c (ftrace_find_call): Update parameters. Update users.
4638 Use instruction classification.
4639 (ftrace_new_return): Update parameters. Update users.
4640 (ftrace_update_function): Update parameters. Update users. Use
4641 instruction classification.
4642 (ftrace_update_insns): Update parameters. Update users.
4643 (ftrace_classify_insn): New.
4644 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
4645 TRY_CATCH around call to gdb_insn_length.
4647 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4649 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
4650 Update parameters. Update users.
4652 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4654 * btrace.c (parse_xml_btrace_conf_bts): Add size.
4655 (btrace_conf_bts_attributes): New.
4656 (btrace_conf_children): Add attributes.
4657 * common/btrace-common.h (btrace_config_bts): New.
4658 (btrace_config)<bts>: New.
4659 (btrace_config): Update comment.
4660 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
4662 * features/btrace-conf.dtd: Increment version. Add size
4663 attribute to bts element.
4664 * record-btrace.c (set_record_btrace_bts_cmdlist,
4665 show_record_btrace_bts_cmdlist): New.
4666 (record_btrace_adjust_size, record_btrace_print_bts_conf,
4667 record_btrace_print_conf, cmd_set_record_btrace_bts,
4668 cmd_show_record_btrace_bts): New.
4669 (record_btrace_info): Call record_btrace_print_conf.
4670 (_initialize_record_btrace): Add commands.
4671 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
4672 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
4673 (btrace_sync_conf): Synchronize bts size.
4674 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
4675 * NEWS: Announce new commands and new packets.
4677 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4679 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
4680 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
4681 (x86_linux_btrace_conf): New.
4682 (x86_linux_create_target): Initialize to_btrace_conf.
4683 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
4684 Check format. Split into this and ...
4685 (linux_enable_bts): ... this.
4686 (linux_btrace_conf): New.
4687 (perf_event_skip_record): Renamed into ...
4688 (perf_event_skip_bts_record): ... this. Updated users.
4689 (linux_disable_btrace): Split into this and ...
4690 (linux_disable_bts): ... this.
4691 (linux_read_btrace): Check format.
4692 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
4693 (linux_btrace_conf): New.
4694 (btrace_target_info)<ptid>: Moved.
4695 (btrace_target_info)<conf>: New.
4696 (btrace_target_info): Split into this and ...
4697 (btrace_tinfo_bts): ... this. Updated users.
4698 * btrace.c (btrace_enable): Update parameters.
4699 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
4700 (btrace_conf_children, btrace_conf_attributes)
4701 (btrace_conf_elements): New.
4702 * btrace.h (btrace_enable): Update parameters.
4703 (btrace_conf, parse_xml_btrace_conf): New.
4704 * common/btrace-common.h (btrace_config): New.
4705 * feature/btrace-conf.dtd: New.
4706 * record-btrace.c (record_btrace_conf): New.
4707 (record_btrace_cmdlist): New.
4708 (record_btrace_enable_warn, record_btrace_open): Pass
4709 &record_btrace_conf.
4710 (record_btrace_info): Print recording format.
4711 (cmd_record_btrace_bts_start): New.
4712 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
4713 (_initialize_record_btrace): Add "record btrace bts" subcommand.
4714 Add "record bts" alias command.
4715 * remote.c (remote_state)<btrace_config>: New.
4716 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
4717 (remote_protocol_features): Add qXfer:btrace-conf:read.
4718 (remote_open_1): Call remote_btrace_reset.
4719 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
4720 (btrace_target_info)<conf>: New.
4721 (btrace_sync_conf, btrace_read_config): New.
4722 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
4724 (remote_btrace_conf): New.
4725 (init_remote_ops): Initialize to_btrace_conf.
4726 (_initialize_remote): Add qXfer:btrace-conf packet.
4727 * target.c (target_enable_btrace): Update parameters.
4728 (target_btrace_conf): New.
4729 * target.h (target_enable_btrace): Update parameters.
4730 (target_btrace_conf): New.
4731 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
4732 (target_ops)<to_enable_btrace>: Update parameters and comment.
4733 (target_ops)<to_btrace_conf>: New.
4734 * target-delegates: Regenerate.
4735 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
4736 (target_debug_print_const_struct_btrace_target_info_p): New.
4737 * NEWS: Announce new command and new packet.
4739 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4741 * nat/linux-btrace.h (perf_event_buffer): New.
4742 (btrace_target_info) <buffer, size, data_head>: Replace with ...
4744 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
4745 (perf_event_buffer_size, perf_event_buffer_begin)
4746 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
4748 (perf_event_new_data): New.
4750 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4752 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
4753 * record-btrace.c (record_btrace_open): Remove call to
4754 target_supports_btrace.
4755 * remote.c (remote_supports_btrace): Update parameters.
4756 * target.c (target_supports_btrace): Update parameters.
4757 * target.h (to_supports_btrace, target_supports_btrace): Update
4759 * target-delegates.c: Regenerate.
4760 * target-debug.h (target_debug_print_enum_btrace_format): New.
4761 * nat/linux-btrace.c
4762 (kernel_supports_btrace): Rename into ...
4763 (kernel_supports_bts): ... this. Update users. Update warning text.
4764 (intel_supports_btrace): Rename into ...
4765 (intel_supports_bts): ... this. Update users.
4766 (cpu_supports_btrace): Rename into ...
4767 (cpu_supports_bts): ... this. Update users.
4768 (linux_supports_btrace): Update parameters. Split into this and ...
4769 (linux_supports_bts): ... this.
4770 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
4772 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4774 * Makefile.in (SFILES): Add common/btrace-common.c.
4775 (COMMON_OBS): Add common/btrace-common.o.
4776 (btrace-common.o): Add build rules.
4777 * btrace.c (parse_xml_btrace): Update parameters.
4778 (parse_xml_btrace_block): Set format field.
4779 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
4780 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
4781 (btrace_compute_ftrace): Split into this and...
4782 (btrace_compute_ftrace_bts): ...this.
4783 (btrace_stitch_trace): Split into this and...
4784 (btrace_stitch_bts): ...this.
4785 * btrace.h (parse_xml_btrace): Update parameters.
4786 (make_cleanup_btrace_data): New.
4787 * common/btrace-common.c: New.
4788 * common/btrace-common.h: Include common-defs.h.
4789 (btrace_block_s): Update comment.
4790 (btrace_format): New.
4791 (btrace_format_string): New.
4792 (btrace_data_bts): New.
4794 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
4795 * remote.c (remote_read_btrace): Update parameters.
4796 * target.c (target_read_btrace): Update parameters.
4797 * target.h (target_read_btrace): Update parameters.
4798 (target_ops)<to_read_btrace>: Update parameters.
4799 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
4800 * target-delegates.c: Regenerate.
4801 * target-debug (target_debug_print_struct_btrace_data_p): New.
4802 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
4803 (linux_read_bts): ...this.
4804 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
4806 2015-02-06 Doug Evans <dje@google.com>
4808 * remote-m32r-sdi.c: Include symfile.h.
4810 2015-02-06 Doug Evans <dje@google.com>
4812 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
4813 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
4816 2015-02-06 Pedro Alves <palves@redhat.com>
4818 * linux-thread-db.c (find_new_threads_callback): Add debug output.
4820 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
4823 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
4824 (enable_count_command): Check args for NULL value.
4826 2015-02-05 Doug Evans <xdje42@gmail.com>
4828 * guile/scm-frame.c: Fix spelling errors in a comment.
4830 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
4832 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
4833 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
4836 2015-02-04 Pedro Alves <palves@redhat.com>
4838 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
4839 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
4841 (resume_stopped_resumed_lwps): Don't check whether the thread is
4842 marked as executing.
4843 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
4845 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4847 * regset.h (struct regset): Add flags field.
4848 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
4849 * corelow.c (get_core_register_section): Add warning if the size
4850 exceeds the requested size and the regset does not have the
4851 REGSET_VARIABLE_SIZE flag set.
4852 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
4854 * armbsd-tdep.c (armbsd_gregset): Likewise.
4855 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
4856 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
4857 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
4858 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
4860 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4862 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
4863 For ".reg-xstate", explicitly specify the requested section size
4864 via X86_XSTATE_SIZE instead of just 0 on input and
4865 X86_XSTATE_MAX_SIZE on output.
4866 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
4869 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4872 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
4873 function type, particularly its SIZE parameter.
4874 * gdbarch.h: Regenerate.
4875 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
4876 actual against required size using ">=" instead of "==".
4877 (amd64_collect_fpregset): Likewise.
4878 * i386-tdep.c (i386_supply_gregset): Likewise.
4879 (i386_collect_gregset): Likewise.
4880 (i386_supply_fpregset): Likewise.
4881 (i386_collect_fpregset): Likewise.
4882 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
4883 (mips_fill_gregset_wrapper): Likewise.
4884 (mips_supply_fpregset_wrapper): Likewise.
4885 (mips_fill_fpregset_wrapper): Likewise.
4886 (mips64_supply_gregset_wrapper): Likewise.
4887 (mips64_fill_gregset_wrapper): Likewise.
4888 (mips64_supply_fpregset_wrapper): Likewise.
4889 (mips64_fill_fpregset_wrapper): Likewise.
4890 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
4891 (am33_supply_fpregset_method): Likewise.
4892 (am33_collect_gregset_method): Likewise.
4893 (am33_collect_fpregset_method): Likewise.
4895 2015-02-04 Doug Evans <dje@google.com>
4896 Pedro Alves <palves@redhat.com>
4897 Eli Zaretskii <eliz@gnu.org>
4900 * tui/tui-command.c (tui_refresh_cmd_win): New function.
4901 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
4902 * tui/tui-file.c: #include tui/tui-command.h.
4903 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
4904 (tui_file_flush): Refresh command window if stream is gdb_stdout.
4905 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
4907 2015-02-04 Pedro Alves <palves@redhat.com>
4910 * event-loop.c (gdb_do_one_event): Add default switch case.
4912 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4914 Filter out inferior gcc option -fpreprocessed.
4915 * compile/compile.c (filter_args): New function.
4918 2015-02-03 Pedro Alves <palves@redhat.com>
4920 * event-loop.c: Don't declare nor define a queue type for
4922 (event_queue): Delete.
4923 (create_event, create_file_event, gdb_event_xfree)
4924 (initialize_event_loop, process_event): Delete.
4925 (gdb_do_one_event): Return as soon as one event is handled.
4926 (handle_file_event): Change prototype. Used the passed in
4927 file_handler pointer and ready_mask instead of looping over all
4929 (gdb_wait_for_event): Update the poll/select timeouts before
4930 blocking. Run event handlers directly instead of queueing events.
4931 Return as soon as one event is handled.
4932 (struct async_event_handler_data): Delete.
4933 (invoke_async_event_handler): Delete.
4934 (check_async_event_handlers): Change return type to int. Run
4935 event handlers directly instead of queueing events. Return as
4936 soon as one event is handled.
4937 (handle_timer_event): Delete.
4938 (update_wait_timeout): New function, factored out from
4940 (poll_timers): Reimplement.
4941 * event-loop.h (initialize_event_loop): Delete declaration.
4942 * top.c (gdb_init): Don't call initialize_event_loop.
4944 2015-02-03 Pedro Alves <palves@redhat.com>
4946 * event-loop.c (clear_async_event_handler): New function.
4947 * event-loop.h (clear_async_event_handler): New declaration.
4948 * record-btrace.c (record_btrace_async): New function.
4949 (init_record_btrace_ops): Install record_btrace_async.
4950 * record-full.c (record_full_async): New function.
4951 (record_full_resume): Don't mark the async event source here.
4952 (init_record_full_ops): Install record_full_async.
4953 (record_full_core_resume): Don't mark the async event source here.
4954 (init_record_full_core_ops): Install record_full_async.
4955 * remote.c (remote_async): Mark and clear the async stop reply
4956 queue event-loop token as appropriate.
4958 2015-02-03 Pedro Alves <palves@redhat.com>
4960 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
4961 target_is_async_p instead of target_can_async.
4962 (linux_nat_wait): Use target_is_async_p instead of
4963 target_can_async. Don't enable async here.
4964 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
4965 target_is_async_p instead of target_can_async.
4967 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
4969 * varobj.h (lang_varobj_ops): Mention which return values need
4972 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4974 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
4976 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4979 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
4980 results found in the cache.
4982 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4985 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
4986 when allocating a new one.
4988 2015-02-01 Tom Tromey <tom@tromey.com>
4990 * MAINTAINERS: Remove myself.
4992 2015-01-31 Doug Evans <xdje42@gmail.com>
4994 * dwarf2read.c (process_structure_scope): Update setting of
4995 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
4996 * gdbtypes.c (internal_type_vptr_fieldno): New function.
4997 (set_type_vptr_fieldno): New function.
4998 (internal_type_vptr_basetype): New function.
4999 (set_type_vptr_basetype): New function.
5000 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
5002 (allocate_cplus_struct_type): Initialize vptr_fieldno.
5003 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
5004 (print_cplus_stuff): ... moved here.
5005 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
5006 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
5008 (struct cplus_struct_type): ... here. All uses updated.
5009 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
5010 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
5011 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
5012 * stabsread.c (read_tilde_fields): Update setting of
5013 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
5015 2015-01-31 Doug Evans <xdje42@gmail.com>
5017 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
5019 (cp_print_class_member): Rename local domain to self_type.
5020 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
5021 domain_type to self_type.
5022 (set_die_type) <need_gnat_info>: Handle
5023 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
5024 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
5025 TYPE_SPECIFIC_SELF_TYPE.
5026 * gdbtypes.c (internal_type_self_type): New function.
5027 (set_type_self_type): New function.
5028 (smash_to_memberptr_type): Rename parameter domain to self_type.
5029 Update setting of TYPE_SELF_TYPE.
5030 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
5031 (smash_to_method_type): Rename parameter domain to self_type.
5032 Update setting of TYPE_SELF_TYPE.
5033 (check_stub_method): Call smash_to_method_type.
5034 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
5035 (copy_type_recursive): Ditto.
5036 * gdbtypes.h (enum type_specific_kind): New value
5037 TYPE_SPECIFIC_SELF_TYPE.
5038 (struct main_type) <type_specific>: New member self_type.
5039 (struct cplus_struct_type) <fn_field.type>: Update comment.
5040 (TYPE_SELF_TYPE): Rewrite.
5041 (internal_type_self_type, set_type_self_type): Declare.
5042 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
5044 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
5045 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
5047 * stabsread.c (read_member_functions): Mark methods with
5048 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
5051 2015-01-31 Doug Evans <xdje42@gmail.com>
5053 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
5056 2015-01-31 Doug Evans <xdje42@gmail.com>
5058 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
5059 or unions. Return zero if union.
5060 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
5061 (gnuv3_rtti_type): Pass already-check_typedef'd value to
5063 (compute_vtable_size): Assert only passed structs.
5064 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
5066 2015-01-31 Doug Evans <xdje42@gmail.com>
5068 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
5071 2015-01-31 Gary Benson <gbenson@redhat.com>
5072 Doug Evans <dje@google.com>
5077 * cli/cli-cmds.c (complete_command): Notify user if max-completions
5079 * common/common-exceptions.h (enum errors)
5080 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
5081 * completer.h (get_max_completions_reached_message): New declaration.
5082 (max_completions): Likewise.
5083 (completion_tracker_t): New typedef.
5084 (new_completion_tracker): New declaration.
5085 (make_cleanup_free_completion_tracker): Likewise.
5086 (maybe_add_completion_enum): New enum.
5087 (maybe_add_completion): New declaration.
5088 (throw_max_completions_reached_error): Likewise.
5089 * completer.c (max_completions): New global variable.
5090 (new_completion_tracker): New function.
5091 (free_completion_tracker): Likewise.
5092 (make_cleanup_free_completion_tracker): Likewise.
5093 (maybe_add_completions): Likewise.
5094 (throw_max_completions_reached_error): Likewise.
5095 (complete_line): Remove duplicates and limit result to max_completions
5097 (get_max_completions_reached_message): New function.
5098 (gdb_display_match_list): Handle max_completions.
5099 (_initialize_completer): New declaration and function.
5100 * symtab.c: Include completer.h.
5101 (completion_tracker): New static variable.
5102 (completion_list_add_name): Call maybe_add_completion.
5103 (default_make_symbol_completion_list_break_on_1): Renamed from
5104 default_make_symbol_completion_list_break_on. Maintain
5105 completion_tracker across calls to completion_list_add_name.
5106 (default_make_symbol_completion_list_break_on): New function.
5107 * top.c (init_main): Set rl_completion_display_matches_hook.
5108 * tui/tui-io.c: Include completer.h.
5109 (tui_old_rl_display_matches_hook): New static global.
5110 (tui_rl_display_match_list): Notify user if max-completions reached.
5111 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
5112 * NEWS (New Options): Mention set/show max-completions.
5114 2015-01-31 Gary Benson <gbenson@redhat.com>
5116 * symtab.c (struct add_name_data) <code>: New field.
5118 (add_symtab_completions): New function.
5119 (symtab_expansion_callback): Likewise.
5120 (default_make_symbol_completion_list_break_on): Set datum.code.
5121 Move minimal symbol scan before calling expand_symtabs_matching.
5122 Scan known primary symtabs for externs and statics before calling
5123 expand_symtabs_matching. Pass symtab_expansion_callback as
5124 expansion_notify argument to expand_symtabs_matching. Do not scan
5125 primary symtabs for externs and statics after calling
5126 expand_symtabs_matching.
5128 2015-01-31 Gary Benson <gbenson@redhat.com>
5130 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
5131 (struct quick_symbol_functions) <expand_symtabs_matching>:
5132 New argument expansion_notify. All uses updated.
5133 (expand_symtabs_matching): New argument expansion_notify.
5135 * symfile-debug.c (debug_qf_expand_symtabs_matching):
5136 Also print expansion notify.
5137 * symtab.c (expand_symtabs_matching_via_partial): Call
5138 expansion_notify whenever a partial symbol table is expanded.
5139 * dwarf2read.c (dw2_expand_symtabs_matching): Call
5140 expansion_notify whenever a symbol table is instantiated.
5142 2015-01-31 Doug Evans <xdje42@gmail.com>
5144 * cli-out.c: #include completer.h, readline/readline.h.
5145 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
5146 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
5147 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
5148 * cli-out.h (cli_display_match_list): Declare.
5149 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
5150 (ELLIPSIS_LEN): Ditto.
5151 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
5152 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
5153 (gdb_fnprint, gdb_print_filename): Ditto.
5154 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
5155 (gdb_display_match_list): Ditto.
5156 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
5157 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
5158 (mld_beep_ftype, mld_read_key_ftype): Ditto.
5159 (match_list_displayer): New struct.
5160 (gdb_display_match_list): Declare.
5161 * top.c (init_main): Set rl_completion_display_matches_hook.
5162 * tui/tui-io.c: #include completer.h.
5163 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
5164 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
5165 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
5166 (tui_mld_getc, tui_mld_read_key): Ditto.
5167 (tui_rl_display_match_list): Rewrite.
5168 (tui_handle_resize_during_io): New arg for_completion. All callers
5171 2015-01-31 Doug Evans <xdje42@gmail.com>
5173 Add symbol lookup cache.
5174 * NEWS: Document new options and commands.
5175 * symtab.c (symbol_cache_key): New static global.
5176 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
5177 (SYMBOL_LOOKUP_FAILED): New macro.
5178 (symbol_cache_slot_state): New enum.
5179 (block_symbol_cache): New struct.
5180 (symbol_cache): New struct.
5181 (new_symbol_cache_size, symbol_cache_size): New static globals.
5182 (hash_symbol_entry, eq_symbol_entry): New functions.
5183 (symbol_cache_byte_size, resize_symbol_cache): New functions.
5184 (make_symbol_cache, free_symbol_cache): New functions.
5185 (get_symbol_cache, symbol_cache_cleanup): New function.
5186 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
5187 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
5188 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
5189 (symbol_cache_flush, symbol_cache_dump): New functions.
5190 (maintenance_print_symbol_cache): New function.
5191 (maintenance_flush_symbol_cache): New function.
5192 (symbol_cache_stats): New function.
5193 (maintenance_print_symbol_cache_statistics): New function.
5194 (symtab_new_objfile_observer): New function.
5195 (symtab_free_objfile_observer): New function.
5196 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
5197 (_initialize_symtab): Init symbol_cache_key. New parameter
5198 maint symbol-cache-size. New maint commands print symbol-cache,
5199 print symbol-cache-statistics, flush-symbol-cache.
5200 Install new_objfile, free_objfile observers.
5202 2015-01-31 Joel Brobecker <brobecker@adacore.com>
5205 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
5208 2015-01-31 Doug Evans <xdje42@gmail.com>
5210 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
5211 * auto-load.c: #include ctype.h.
5212 (struct auto_load_pspace_info): Replace member loaded_scripts with
5213 new members loaded_script_files, loaded_script_texts.
5214 (auto_load_pspace_data_cleanup): Update.
5215 (init_loaded_scripts_info): Update.
5216 (get_auto_load_pspace_data_for_loading): Update.
5217 (maybe_add_script_file): Renamed from maybe_add_script. All callers
5219 (maybe_add_script_text): New function.
5220 (clear_section_scripts): Update.
5221 (source_script_file, execute_script_contents): New functions.
5222 (source_section_scripts): Add support for
5223 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
5224 (print_scripts): New function.
5225 (auto_load_info_scripts): Also print inlined scripts.
5226 (maybe_print_unsupported_script_warning): Renamed from
5227 unsupported_script_warning_print. All callers updated.
5228 (maybe_print_script_not_found_warning): Renamed from
5229 script_not_found_warning_print. All callers updated.
5230 * extension-priv.h (struct extension_language_script_ops): New member
5231 objfile_script_executor.
5232 * extension.c (ext_lang_objfile_script_executor): New function.
5233 * extension.h (objfile_script_executor_func): New typedef.
5234 (ext_lang_objfile_script_executor): Declare.
5235 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
5236 * guile/guile.c (guile_extension_script_ops): Update.
5237 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
5238 * python/python.c (python_extension_script_ops): Update.
5239 (gdbpy_execute_objfile_script): New function.
5241 2015-01-31 Eli Zaretskii <eliz@gnu.org>
5243 * tui/tui-io.c (tui_expand_tabs): New function.
5244 (tui_puts, tui_redisplay_readline): Expand TABs into the
5245 appropriate number of spaces.
5246 * tui/tui-regs.c: Include tui-io.h.
5247 (tui_register_format): Call tui_expand_tabs to expand TABs into
5248 the appropriate number of spaces.
5249 * tui/tui-io.h: Add prototype for tui_expand_tabs.
5251 2015-01-30 Doug Evans <dje@google.com>
5253 * NEWS: "info source" command now display producer string if present.
5254 * source.c (source_info): Print producer string if present.
5256 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5258 * varobj.c (varobj_delete): Fix comment.
5260 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5262 * varobj.c (create_child): Modify comment.
5264 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5266 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
5268 (ada_name_of_variable): Same.
5269 (ada_path_expr_of_child): Same.
5270 (ada_value_of_variable): Same.
5271 (ada_value_is_changeable_p): Same.
5272 (ada_value_has_mutated): Same.
5273 * c-varobj.c (varobj_is_anonymous_child): Same.
5274 (c_is_path_expr_parent): Same.
5275 (c_number_of_children): Same.
5276 (c_name_of_variable): Same.
5277 (c_path_expr_of_child): Same.
5279 (c_value_of_variable): Same.
5280 (cplus_number_of_children): Same.
5281 (cplus_name_of_variable): Same.
5282 (cplus_path_expr_of_child): Same.
5283 (cplus_value_of_variable): Same.
5284 * jv-varobj.c (java_number_of_children): Same.
5285 (java_name_of_variable): Same.
5286 (java_path_expr_of_child): Same.
5287 (java_value_of_variable): Same.
5288 * varobj.c (number_of_children): Same.
5289 (name_of_variable): Same.
5291 (varobj_ensure_python_env): Same.
5292 (varobj_get_objname): Same.
5293 (varobj_get_expression): Same.
5294 (varobj_get_display_format): Same.
5295 (varobj_get_display_hint): Same.
5296 (varobj_has_more): Same.
5297 (varobj_get_thread_id): Same.
5298 (varobj_get_frozen): Same.
5299 (dynamic_varobj_has_child_method): Same.
5300 (varobj_get_gdb_type): Same.
5301 (is_path_expr_parent): Same.
5302 (varobj_default_is_path_expr_parent): Same.
5303 (varobj_get_language): Same.
5304 (varobj_get_attributes): Same.
5305 (varobj_is_dynamic_p): Same.
5306 (varobj_get_child_range): Same.
5307 (varobj_value_has_mutated): Same.
5308 (varobj_get_value_type): Same.
5309 (number_of_children): Same.
5310 (name_of_variable): Same.
5311 (check_scope): Same.
5312 (varobj_editable_p): Same.
5313 (varobj_value_is_changeable_p): Same.
5314 (varobj_floating_p): Same.
5315 (varobj_default_value_is_changeable_p): Same.
5317 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5319 * varobj.c (varobj_get_path_expr): Set var->path_expr.
5320 * c-varobj.c (c_path_expr_of_child): Set local var instead of
5322 (cplus_path_expr_of_child): Same.
5324 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5326 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
5328 (mi_cmd_var_info_expression): Same.
5329 * varobj.c (varobj_get_expression): Mention in the comment that
5330 the result must by freed by the caller.
5332 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5334 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
5336 (varobj_update_one): Same.
5337 * varobj.c (update_type_if_necessary): Free curr_type_str and
5339 (varobj_get_type): Specify in comment that the result needs to be
5340 freed by the caller.
5342 2015-01-29 Doug Evans <dje@google.com>
5345 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
5347 2015-01-25 Mark Wielaard <mjw@redhat.com>
5349 * dwarf2read.c (checkproducer): Call producer_is_gcc.
5350 * utils.c (producer_is_gcc_ge_4): Likewise.
5351 (producer_is_gcc): New function.
5352 * utils.h (producer_is_gcc): New declaration.
5354 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5356 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
5358 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
5359 parameter by "addr_stack" parameter.
5360 (resolve_dynamic_range): Replace "addr" parameter by
5361 "stack_addr" parameter. Update function documentation.
5362 Update code accordingly.
5363 (resolve_dynamic_array, resolve_dynamic_union)
5364 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
5365 (resolve_dynamic_type): Update code, following the changes made
5366 to resolve_dynamic_type_internal's interface.
5367 * dwarf2loc.h (struct property_addr_info): New.
5368 (dwarf2_evaluate_property): Replace "address" parameter
5369 by "addr_stack" parameter. Adjust function documentation.
5370 (struct dwarf2_offset_baton): New.
5371 (struct dwarf2_property_baton): Update documentation of
5372 field "referenced_type" to be more general. New field
5373 "offset_info" in union data field.
5374 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
5375 parameter by "addr_stack" parameter. Adjust code accordingly.
5376 Add support for PROP_ADDR_OFFSET properties.
5377 * dwarf2read.c (attr_to_dynamic_prop): Add support for
5378 DW_AT_data_member_location attributes as well. Use case
5379 statements instead of if/else condition.
5381 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5383 * ada-varobj.c (ada_varobj_get_array_number_of_children):
5384 Return zero if PARENT_VALUE is NULL and parent_type's
5385 range type is dynamic.
5387 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5389 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
5390 nonzero if the type's subtype is dynamic.
5391 (resolve_dynamic_range): Also resolve the range's subtype.
5393 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
5395 Pushed by Joel Brobecker <brobecker@adacore.com>.
5396 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
5398 2015-01-27 Doug Evans <dje@google.com>
5400 * NEWS: Mention gdb.Objfile.username.
5401 * python/py-objfile.c (objfpy_get_username): New function.
5402 (objfile_getset): Add "username".
5404 2015-01-24 Mark Wielaard <mjw@redhat.com>
5406 * stack.c (return_command): Markup warning message with _.
5408 2015-01-24 Doug Evans <xdje42@gmail.com>
5410 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
5412 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5414 Fix 100x slowdown regression on DWZ files.
5415 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
5416 (struct line_header): Add offset and offset_in_dwz.
5417 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
5418 (free_line_header_voidp): New declaration.
5419 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
5421 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
5422 (handle_DW_AT_stmt_list): Use line_header_hash.
5423 (free_line_header_voidp): New function.
5424 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
5425 (dwarf_decode_lines): New parameter decode_mapping, use it.
5426 (dwarf2_free_objfile): Free line_header_hash.
5428 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
5431 * valops.c (value_rtti_indirect_type): Catch exception thrown by
5434 2015-01-15 Mark Wielaard <mjw@redhat.com>
5436 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
5438 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
5439 calling_convention an 8 bit bit field.
5440 (TYPE_NO_RETURN): New macro.
5441 * infcmd.c (finish_command): Query if function does not return
5443 * stack.c (return_command): Likewise.
5445 2015-01-23 Pedro Alves <palves@redhat.com>
5447 * linux-nat.c (linux_is_async_p): New macro.
5448 (linux_nat_is_async_p):
5449 (linux_nat_terminal_inferior): Check whether the target can async
5450 instead of whether it is already async.
5451 (linux_nat_terminal_ours): Don't check whether the target is
5453 (linux_async_pipe): Use linux_is_async_p.
5455 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5457 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
5459 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
5460 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
5461 Sort tp_array using tp_array_compar.
5462 (_initialize_thread): Extend thread_apply_all_command help.
5464 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5466 * corelow.c (core_open): Call also thread_command.
5467 * gdbthread.h (thread_command): New prototype moved from ...
5468 * thread.c (thread_command): ... here.
5469 (thread_command): Make it global.
5471 2015-01-22 Pedro Alves <palves@redhat.com>
5473 * configure.ac [*mingw32*]: Check $curses_found instead of
5475 * configure: Regenerate.
5476 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
5477 HAVE_NCURSES_NCURSES_H checks.
5479 2015-01-22 Eli Zaretskii <eliz@gnu.org>
5481 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
5482 fails with the 1st arg NULL, try again with "unknown". Don't test
5483 the "cup" capability: it isn't supported by the Windows port of
5484 ncurses, but the Windows console driver is still capable of
5487 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5489 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
5491 2015-01-22 Eli Zaretskii <eliz@gnu.org>
5493 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
5494 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
5495 reason that "make TAGS" is broken.
5497 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
5499 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
5500 and check additional store instructions.
5502 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
5504 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
5506 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
5508 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
5509 ppc_canonicalize_syscall, ppc_linux_syscall_record,
5510 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
5511 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5512 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
5513 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
5514 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
5515 ppc_process_record_op19, ppc_process_record_op31,
5516 ppc_process_record_op59, ppc_process_record_op60,
5517 ppc_process_record_op63): Likewise.
5519 2015-01-20 Joel Brobecker <brobecker@adacore.com>
5521 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
5522 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
5525 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
5527 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
5528 ppc_process_record_op31, ppc_process_record_op59,
5529 ppc_process_record_op60, ppc_process_record_op63,
5530 ppc_process_record): Fix -Wformat warning.
5531 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
5532 Remove unused variables.
5534 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
5536 * MAINTAINERS (Write After Approval): Add "Chen Gang".
5538 2015-01-19 Eli Zaretskii <eliz@gnu.org>
5540 * configure.ac [*mingw32*]: Only add windows-termcap.o to
5541 CONFIG_OBS if not building with a curses library.
5542 * configure: Regenerate.
5544 * windows-termcap.c: Include defs.h. Make the whole body empty if
5545 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
5546 HAVE_NCURSES_NCURSES_H is defined.
5548 2015-01-19 Joel Brobecker <brobecker@adacore.com>
5550 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
5551 from end of line to start of next line.
5553 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5555 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
5556 Scan PLT stub backward for reverse debugging.
5557 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5559 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5560 Ulrich Weigand <uweigand@de.ibm.com>
5562 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
5564 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
5566 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
5567 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
5568 (ppc_linux_init_abi): Set process_record, process_record_signal.
5569 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
5570 ppc_linux_record_tdep to gdbarch_tdep.
5571 (ppc_process_record): New declaration.
5572 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
5573 ppc_process_record_op19, ppc_process_record_op31,
5574 ppc_process_record_op59, ppc_process_record_op60,
5575 ppc_process_record_op63, ppc_process_record): New functions.
5577 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5579 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
5580 rs6000_in_function_epilogue_frame_p and add an argument
5582 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
5583 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
5585 (rs6000_epilogue_frame_unwind): New.
5586 (rs6000_gdbarch_init): Append epilogue unwinder.
5588 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
5590 * nat/linux-personality.c: Replace "#ifndef
5591 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
5592 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
5595 2015-01-16 Eli Zaretskii <eliz@gnu.org>
5597 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
5599 (_initialize_tui_win) <border-kind, border-mode>:
5600 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
5601 (tui_set_tab_width_command): Fix the commentary.
5603 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
5605 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
5607 (tui_set_tab_width_command): Delete and recreate the source and
5608 the disassembly windows, to show the effect of the changed tab
5611 * tui/tui-data.h (LINE_PREFIX): Make shorter
5612 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
5613 "Thread NNNNN.XXXX" thread ID notation on Windows.
5615 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
5617 Fix gcc-5 compilation.
5618 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
5620 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
5622 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
5623 (linux-personality.o): New rule.
5624 * common/common-defs.h: Include <stdint.h>.
5625 * config/aarch64/linux.mh (NATDEPFILES): Include
5626 linux-personality.o.
5627 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
5628 * config/arm/linux.mh (NATDEPFILES): Likewise.
5629 * config/i386/linux64.mh (NATDEPFILES): Likewise.
5630 * config/i386/linux.mh (NATDEPFILES): Likewise.
5631 * config/ia64/linux.mh (NATDEPFILES): Likewise.
5632 * config/m32r/linux.mh (NATDEPFILES): Likewise.
5633 * config/m68k/linux.mh (NATDEPFILES): Likewise.
5634 * config/mips/linux.mh (NATDEPFILES): Likewise.
5635 * config/pa/linux.mh (NATDEPFILES): Likewise.
5636 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
5637 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
5638 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
5639 * config/s390/linux.mh (NATDEPFILES): Likewise.
5640 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
5641 * config/sparc/linux.mh (NATDEPFILES): Likewise.
5642 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
5643 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
5644 * defs.h: Remove #include <stdint.h> (moved to
5645 common/common-defs.h).
5646 * linux-nat.c: Include nat/linux-personality.h. Remove #include
5647 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
5648 nat/linux-personality.c).
5649 (linux_nat_create_inferior): Remove code to disable address space
5650 randomization (moved to nat/linux-personality.c). Create cleanup
5651 to disable address space randomization.
5652 * nat/linux-personality.c: New file.
5653 * nat/linux-personality.h: Likewise.
5655 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
5657 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
5658 common/posix-strerror.c.
5659 (posix-strerror.o): New rule.
5660 (mingw-strerror.o): Likewise.
5661 * common/common-utils.h (safe_strerror): Move prototype to here,
5663 * common/common.host: New file.
5664 * common/mingw-strerror.c: Likewise.
5665 * common/posix-strerror.c: Likewise.
5666 * configure: Regenerated.
5667 * configure.ac: Source common/common.host. Add variable
5668 common_host_obs to gdb_host_obs.
5669 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
5670 gdb/common/posix-strerror.c when warning about the use of
5672 * mingw-hdep.c (safe_strerror): Remove definition; move it to
5673 common/mingw-strerror.c.
5674 * posix-hdep.c (safe_strerror): Remove definition; move it to
5675 common/posix-hdep.c.
5676 * utils.h (safe_strerror): Remove prototype; move to
5677 common/common-utils.h.
5679 2015-01-15 Joel Brobecker <brobecker@adacore.com>
5683 2015-01-15 Joel Brobecker <brobecker@adacore.com>
5685 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
5686 ___XA type if the array has already been fixed.
5688 2015-01-14 Yao Qi <yao@codesourcery.com>
5690 * Makefile.in (ppc-linux.o): New rule.
5691 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
5692 * configure.ac: AC_CHECK_FUNCS(getauxval).
5693 * config.in: Re-generated.
5694 * configure: Re-generated.
5695 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
5697 * nat/ppc-linux.c: New file.
5698 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
5699 Call ppc64_64bit_inferior_p.
5701 2015-01-14 Yao Qi <yao@codesourcery.com>
5703 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
5705 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
5706 (PPC_FEATURE_HAS_DFP): Likewise.
5707 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
5708 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
5709 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
5710 Include "nat/ppc-linux.h".
5711 * nat/ppc-linux.h: New file.
5712 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
5714 2015-01-14 Pedro Alves <palves@redhat.com>
5717 * breakpoint.c: Include "interps.h".
5718 (bpstat_do_actions_1): Also check whether the interpreter is
5721 2015-01-14 Pedro Alves <palves@redhat.com>
5724 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
5725 reinstall if the interpreter is sync.
5727 2015-01-13 Doug Evans <dje@google.com>
5729 * objfiles.c (objfile_filename): New function.
5730 * objfiles.h (objfile_filename): Declare it.
5731 (objfile_name): Add function comment.
5732 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
5733 bfd file name (which may be realpath'd), and the original name.
5735 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5737 * NEWS: Create a new section for the next release branch.
5738 Rename the section of the current branch, now that it has
5741 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5743 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
5744 * version.in: Bump version to 7.9.50.DATE-cvs.
5746 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5748 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
5749 Remove trailing new-line in argument of call to warning.
5751 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5753 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
5754 new-line in argument of call to "warning".
5756 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5758 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
5759 in static block, then try searching for primitive types.
5761 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
5763 * top.h (gdb_add_history): Declare.
5764 * top.c (command_count): New variable.
5765 (gdb_add_history): New function.
5766 (gdb_safe_append_history): New static function.
5767 (quit_force): Call it.
5768 (command_line_input): Use gdb_add_history instead of
5770 * event-top.c (command_line_handler): Likewise.
5772 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
5775 * darwin-nat.c: Replace <machine/setjmp.h> #include by
5776 <setjmp.h> #include.
5778 2015-01-11 Doug Evans <xdje42@gmail.com>
5780 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
5782 2015-01-11 Doug Evans <xdje42@gmail.com>
5785 * NEWS: The "maint demangle" command is renamed as "demangle".
5786 * demangle.c: #include cli/cli-utils.h, language.h.
5787 (demangle_command): New function.
5788 (_initialize_demangle): Add new command "demangle".
5789 * maint.c (maintenance_demangle): Stub out.
5790 (_initialize_maint_cmds): Update help text for "maint demangle",
5791 and mark as deprecated.
5793 2015-01-11 Mark Kettenis <kettenis@gnu.org>
5795 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
5796 inferior_thread is a function.
5798 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
5800 * Makefile.in (.y.c): Don't munge yacc's #line
5803 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
5805 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
5806 to prompt for input.
5807 * tui/tui-hooks.c (tui_query_hook): Remove.
5808 (tui_install_hooks): Don't set deprecated_query_hook.
5809 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
5810 height calculation. Always update the command window's cur_line.
5812 2015-01-09 Pedro Alves <palves@redhat.com>
5814 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
5816 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
5818 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
5819 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
5821 (check_stopped_by_watchpoint): New function.
5822 (save_sigtrap): Reimplement.
5823 (linux_nat_stopped_by_watchpoint): Adjust.
5824 (linux_nat_lp_status_is_event): Delete.
5825 (stop_wait_callback): Only call save_sigtrap after storing the
5827 (status_callback): If the thread had been stopped for a breakpoint
5828 that has since been removed, discard the event and resume the LWP.
5829 (count_events_callback, select_event_lwp_callback): Use
5830 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
5831 (cancel_breakpoint): Rename to ...
5832 (check_stopped_by_breakpoint): ... this. Record whether the LWP
5833 stopped for a software breakpoint or hardware breakpoint.
5834 (select_event_lwp): Only give preference to the stepping LWP in
5835 all-stop mode. Adjust comments.
5836 (stop_and_resume_callback): Remove references to new_pending_p.
5837 (linux_nat_filter_event): Likewise. Leave exit events of the
5838 leader thread pending here. Handle signal short circuiting here.
5839 Only call save_sigtrap after storing the pending waitstatus.
5840 (linux_nat_wait_1): Remove 'retry' label. Remove references to
5841 new_pending. Don't handle leaving events the caller is not
5842 interested in pending here, nor handle signal short-circuiting
5843 here. Also give equal priority to all LWPs that have had events
5844 in non-stop mode. If reporting a software breakpoint event,
5845 unadjust the LWP's PC.
5846 * linux-nat.h (enum lwp_stop_reason): New.
5847 (struct lwp_info) <stop_pc>: New field.
5848 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
5849 (struct lwp_info) <stop_reason>: New field.
5850 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
5852 2015-01-09 Pedro Alves <palves@redhat.com>
5854 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
5855 Set the LWP's 'resumed' flag.
5857 2015-01-09 Pedro Alves <palves@redhat.com>
5859 * linux-nat.c (linux_resume_one_lwp): New function.
5860 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
5861 (linux_nat_resume): Use lwp_status_pending_p and
5862 linux_resume_one_lwp.
5863 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
5864 (linux_handle_extended_wait): Use linux_resume_one_lwp.
5865 (status_callback, running_callback): Use lwp_status_pending_p.
5866 (lwp_status_pending_p): New function.
5867 (stop_and_resume_callback): Use lwp_status_pending_p.
5868 (linux_nat_filter_event): Use linux_resume_one_lwp.
5869 (linux_nat_wait_1): Always use status_callback to look for an LWP
5870 with a pending status. Use linux_resume_one_lwp.
5871 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
5872 linux_resume_one_lwp.
5874 2015-01-09 Pedro Alves <palves@redhat.com>
5876 * breakpoint.c (bp_location_inserted_here_p): New function,
5877 factored out from ...
5878 (breakpoint_inserted_here_p): ... here. Use
5879 ALL_BP_LOCATIONS_AT_ADDR.
5880 (software_breakpoint_inserted_here_p): Use
5881 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
5883 2014-01-09 Pedro Alves <palves@redhat.com>
5885 Skip enabling event reporting if the kernel supports
5887 * linux-thread-db.c: Include "nat/linux-ptrace.h".
5888 (thread_db_use_events): New function.
5889 (try_thread_db_load_1): Check thread_db_use_events before enabling
5891 (update_thread_state): New function.
5892 (attach_thread): Use it. Check thread_db_use_events before
5893 enabling event reporting.
5894 (thread_db_detach): Check thread_db_use_events before disabling
5896 (find_new_threads_callback): Check thread_db_use_events before
5897 enabling event reporting. Update the thread's state if not using
5898 libthread_db events.
5900 2015-01-09 Pedro Alves <palves@redhat.com>
5902 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
5903 about to wait for is > 0.
5904 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
5905 the kernel thread ID is -1.
5907 2015-01-09 Pedro Alves <palves@redhat.com>
5909 * linux-nat.c (attach_proc_task_lwp_callback): New function.
5910 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
5911 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
5912 ptrace option flags.
5913 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
5915 * nat/linux-procfs.c: Include <dirent.h>.
5916 (linux_proc_get_int): New parameter "warn". Handle it.
5917 (linux_proc_get_tgid): Adjust.
5918 (linux_proc_get_tracerpid): Rename to ...
5919 (linux_proc_get_tracerpid_nowarn): ... this.
5920 (linux_proc_pid_get_state): New function, factored out from
5921 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
5923 (linux_proc_pid_is_gone): New function.
5924 (linux_proc_pid_is_stopped): Adjust.
5925 (linux_proc_pid_is_zombie_maybe_warn)
5926 (linux_proc_pid_is_zombie_nowarn): New functions.
5927 (linux_proc_pid_is_zombie): Use
5928 linux_proc_pid_is_zombie_maybe_warn.
5929 (linux_proc_attach_tgid_threads): New function.
5930 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
5931 (linux_proc_get_tracerpid): Rename to ...
5932 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
5933 (linux_proc_pid_is_gone): New declaration.
5934 (linux_proc_pid_is_zombie): Update comment.
5935 (linux_proc_pid_is_zombie_nowarn): New declaration.
5936 (linux_proc_attach_lwp_func): New typedef.
5937 (linux_proc_attach_tgid_threads): New declaration.
5938 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
5939 use nowarn functions.
5940 (linux_ptrace_attach_fail_reason_string): Move here from
5941 gdbserver/linux-low.c and rename.
5942 (ptrace_supports_feature): If the current ptrace options are not
5943 known yet, check them now, instead of asserting.
5944 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
5947 2015-01-09 Pedro Alves <palves@redhat.com>
5949 * linux-thread-db.c (thread_db_find_new_threads_silently)
5950 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
5951 (find_new_threads_once): Print debug output on gdb_stdlog.
5953 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
5954 Pedro Alves <palves@redhat.com>
5956 * compile/compile.c: Include "gdb_wait.h".
5957 (do_rmdir): Check return value, and free 'zap'.
5959 2015-01-08 Pedro Alves <palves@redhat.com>
5960 Yao Qi <yao@codesourcery.com>
5962 * dwarf2loc.c (indirect_pieced_value): Don't call
5963 gdb_sign_extend. Call extract_signed_integer instead.
5964 * utils.c (gdb_sign_extend): Remove.
5965 * utils.h (gdb_sign_extend): Remove declaration.
5967 2015-01-07 Pierre Muller <muller@sourceware.org>
5970 * stabsread.c (define_symbol): Set language for C++ special symbols.
5972 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
5974 * inflow.c (initial_gdb_ttystate): Tweak comment.
5976 2015-01-07 Joel Brobecker <brobecker@adacore.com>
5978 * inflow.c (set_initial_gdb_ttystate): Add empty line after
5979 comment documenting function.
5981 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
5983 * terminal.h (set_initial_gdb_ttystate): Declare.
5984 * inflow.c (initial_gdb_ttystate): New static variable.
5985 (set_initial_gdb_ttystate): New setter.
5986 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
5987 instead of our current terminal state.
5988 * top.c (gdb_init): Call set_initial_gdb_ttystate.
5990 2015-01-07 Joel Brobecker <brobecker@adacore.com>
5992 * guile/scm-type.c (tyscm_array_1): Add comment.
5993 * python/py-type.c (typy_array_1): Add comment.
5995 2015-01-06 Joel Brobecker <brobecker@adacore.com>
5997 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
5998 error if N2 is equal to N1 - 1.
6000 2015-01-06 Joel Brobecker <brobecker@adacore.com>
6002 * python/py-type.c (typy_array_1): Do not raise negative-length
6003 exception if N2 is equal to N1 - 1.
6005 2015-01-03 Doug Evans <xdje42@gmail.com>
6007 * c-exp.y: Whitespace cleanup.
6008 (classify_inner_name): Remove extra ;.
6010 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
6012 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
6015 2015-01-02 Doug Evans <dje@google.com>
6017 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
6019 2015-01-02 Doug Evans <dje@google.com>
6021 * symtab.h (struct symbol): Fix typo in comment.
6023 2015-01-01 Joel Brobecker <brobecker@adacore.com>
6025 Update year range in copyright notice of all files.
6027 2015-01-01 Joel Brobecker <brobecker@adacore.com>
6029 * top.c (print_gdb_version): Update copyright year to 2015.
6031 2015-01-01 Joel Brobecker <brobecker@adacore.com>
6033 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
6035 For older changes see ChangeLog-2014.
6041 version-control: never