1 2015-06-23 Yao Qi <yao.qi@linaro.org>
3 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
4 Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
5 (amd64_linux_store_inferior_registers): Likewise.
6 * arm-linux-nat.c (fetch_fpregister): Likewise.
7 (fetch_fpregs, store_fpregister): Likewise.
8 (store_fpregister, store_fpregs): Likewise.
9 (fetch_register, fetch_regs): Likewise.
10 (store_register, store_regs): Likewise.
11 (fetch_vfp_regs, store_vfp_regs): Likewise.
12 (arm_linux_read_description): Check have_ptrace_getregset is
13 TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
15 * i386-linux-nat.c (fetch_xstateregs): Check
16 have_ptrace_getregset is not TRIBOOL_TRUE.
17 (store_xstateregs): Likewise.
18 * linux-nat.c (have_ptrace_getregset): Change its type to
20 * linux-nat.h (tribool): New enum.
21 * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
22 Check whether have_ptrace_getregset is TRIBOOL_TRUE.
24 2015-06-19 Doug Evans <dje@google.com>
26 * NEWS: Mention Sun's version of stabs is no longer supported.
27 * elfread.c (free_elfinfo): Delete. All uses updated.
28 (elfstab_offset_sections): Delete. All uses updated.
29 * gdb-stabs.h (stab_section_info): Delete. All uses updated.
30 * psympriv.h (partial_symtab) <section_offsets>: Delete.
32 * psymtab.c (start_psymtab_common): Delete arg section_offsets.
35 2015-06-18 Simon Marchi <simon.marchi@ericsson.com>
37 * common/rsp-low.c (needs_escaping): New.
38 (remote_escape_output): Add unit_size parameter. Refactor to
39 support multi-byte addressable units. Rename parameters.
40 * common/rsp-low.h (remote_escape_output): Add unit_size
41 parameter and rename others. Update doc.
42 * remote.c (align_for_efficient_write): New.
43 (remote_write_bytes_aux): Add unit_size parameter and use it.
44 Rename some variables. Update doc.
45 (remote_xfer_partial): Get unit size and use it.
46 (remote_read_bytes_1): Add unit_size parameter and use it.
47 Rename some variables. Update doc.
48 (remote_write_bytes): Same.
49 (remote_xfer_live_readonly_partial): Same.
50 (remote_read_bytes): Same.
51 (remote_flash_write): Update call to remote_write_bytes_aux.
52 (remote_write_qxfer): Update call to remote_escape_output.
53 (remote_search_memory): Same.
54 (remote_hostio_pwrite): Same.
56 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
58 * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
59 locations as inserted.
60 Update and expand comment about permanent locations.
61 (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
62 Move comment to add_location_to_breakpoint.
63 (update_global_location_list): Don't error out if a permanent
64 breakpoint is not marked inserted.
65 Don't error out if a non-permanent breakpoint location is inserted on
66 top of a permanent breakpoint.
68 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
70 * breakpoint.c (make_breakpoint_permanent): Remove unused
72 * breakpoint.h (make_breakpoint_permanent): Remove declaration.
74 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
77 * NEWS: Mention new GDBHISTSIZE behavior.
78 * top.c (init_history): For null or out-of-range GDBHISTSIZE,
79 set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
81 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
83 * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
84 * top.c (init_history): Read from GDBHISTSIZE instead of
86 (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
88 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
90 * top.c (gdb_safe_append_history): Do not call
91 history_truncate_file if the history is not stifled.
93 2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
95 * syscalls/s390-linux.xml: Add syscalls 344 through 354.
96 * syscalls/s390x-linux.xml: Likewise.
98 2015-06-16 Michael Eager <eager@eagercon.com>
100 * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
102 2015-06-16 Patrick Palka <patrick@parcs.ath.cx>
104 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
105 target_terminal_ours_for_output() before calling
106 tui_show_frame_info(), and restore the original terminal
109 2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
111 * arm-linux-nat.c: Include nat/linux-ptrace.h.
113 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
115 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
117 (mi_cmd_data_write_memory_bytes): Same.
119 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
121 * corefile.c (write_memory): Update doc.
122 * gdbcore.h (write_memory): Same.
124 2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
126 * linux-tdep.c (enum filterflags): Make it from anonymous enum.
127 (dump_mapping_p): Use it for parameter filterflags.
128 (linux_find_memory_regions_full): Use it for variable filterflags.
130 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
131 Jan Kratochvil <jan.kratochvil@redhat.com>
133 Merge multiple hex conversions.
134 * monitor.c: Include rsp-low.h.
135 (fromhex): Remove definition.
137 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
138 Jan Kratochvil <jan.kratochvil@redhat.com>
140 Move utility functions to common/.
141 * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
142 Move defs to common/common-utils.c.
143 * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
144 (skip_to_space_const): Move decls to common/common-utils.h.
145 * common/common-defs.h: Move include of common-types.h before
147 * common/common-utils.c: Include host-defs.h and ctype.h.
148 (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
150 (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
152 * common/common-utils.h (strtoulst): Move decl from utils.h.
153 (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
154 Move from cli/cli-utils.h.
155 * common/host-defs.h: Include limits.h.
156 (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
157 (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
158 * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
159 common/common-utils.h.
160 * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
161 (strtoulst): Move to common/common-utils.c.
162 * utils.h (strtoulst): Moved decl to common/common-utils.h.
164 2015-06-15 Yao Qi <yao.qi@linaro.org>
166 * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
168 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
170 * build-id.c: Don't include elf-bfd.h.
171 (build_id_bfd_get): Use bfd_build_id.
172 (build_id_verify): Ditto.
174 (find_separate_debug_file_by_buildid): Ditto.
175 * python/py-objfile.c: Don't include elf-bfd.h.
176 (objfpy_get_build_id) Use bfd_build_id.
177 (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
178 * coffread.c: Include build-id.h.
179 (coff_symfile_read): Try find_separate_debug_file_by_buildid.
181 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
183 * windows-nat.c (do_windows_fetch_inferior_registers)
184 (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
185 conditional with __CYGWIN__.
187 2015-06-13 Andrew Burgess <andrew.burgess@embecosm.com>
189 * completer.c: Add arch-utils.h include.
190 (enum reg_completer_targets): New enum.
191 (reg_or_group_completer_1): New function containing old
192 reg_or_group_completer, add and use new parameter to control what
193 is completed on. Use get_current_arch rather than architecture of
194 currently selected frame.
195 (reg_or_group_completer): Call new reg_or_group_completer_1.
196 (reggroup_completer): Call new reg_or_group_completer_1.
197 * completer.h (reggroup_completer): Add declaration.
198 * tui/tui-regs.c: Add 'completer.h' include.
199 (tui_reg_next_command): Renamed to...
200 (tui_reg_next): ...this. Adjust parameters and return rather than
202 (tui_reg_prev_command): Renamed to...
203 (tui_reg_prev): ...this. Adjust parameters and return rather than
205 (tui_reg_float_command): Delete.
206 (tui_reg_general_command): Delete.
207 (tui_reg_system_command): Delete.
208 (tui_reg_command): Rewrite to perform switching of register group.
210 (tuireglist): Remove.
211 (tui_reggroup_completer): New function.
212 (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
213 creation of 'tui reg' command.
214 * NEWS: Add comment about 'tui reg' changes.
216 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
218 * target.c (target_read): Consider addressable unit size when
219 reading from a memory object.
220 (read_memory_robust): Same.
221 (read_whatever_is_readable): Same.
222 (target_write_with_progress): Consider addressable unit size
223 when writing to a memory object.
224 * target.h (target_read): Update documentation.
225 (target_write): Add documentation.
227 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
229 * arch-utils.h (default_addressable_memory_unit_size): New.
230 * arch-utils.c (default_addressable_memory_unit_size): New.
231 * gdbarch.sh (addressable_memory_unit_size): New.
232 * gdbarch.h: Re-generate.
233 * gdbarch.c: Re-generate.
235 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
237 * target.c (target_read): Rename variables and use
239 (target_read_with_progress): Same.
240 (read_memory_robust): Constify parameters and rename
242 (read_whatever_is_readable): Constify parameters,
243 rename variables, adjust formatting.
244 * target.h (read_memory_robust): Constify parameters.
246 2015-06-12 Ulrich Weigand <uweigand@de.ibm.com>
248 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
249 synthetic (non-AltiVec) vector types.
250 (ppc64_sysv_abi_return_value): Likewise.
252 2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
255 * breakpoint.c (create_breakpoint): Save extra_string for
258 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
260 * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
261 and bt_mask to CORE_ADDR.
263 2015-06-11 Gary Benson <gbenson@redhat.com>
265 * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
266 (mnsh_recv_message): Likewise.
268 2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
270 * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
271 long long int and plongest instead of %ll.
273 2015-06-11 Gary Benson <gbenson@redhat.com>
275 * nat/linux-namespaces.c (gdb_wait.h): New include.
276 (sys/wait.h): Do not include.
278 2015-06-10 Simon Marchi <simon.marchi@ericsson.com>
280 * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
281 end_sequence is true.
283 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
286 * solib-target.c (library_list_start_list): Use explicit NULL
289 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
291 * solib-target.c (library_list_start_list): Do not dereference
292 variable version in its initialization. Make the VERSION check handle
294 (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
296 2015-06-10 Gary Benson <gbenson@redhat.com>
298 * NEWS: Announce support for direct access of executable and
299 shared library files when attaching to inferiors in containers
300 on GNU/Linux systems.
302 2015-06-10 Gary Benson <gbenson@redhat.com>
304 * remote.c (struct remote_state) <fs_pid>: New field.
305 (new_remote_state): Initialize the above.
306 (PACKET_vFile_setfs): New enum value.
307 (remote_hostio_set_filesystem): New function.
308 (remote_hostio_open): Call the above.
309 (remote_hostio_unlink): Likewise.
310 (remote_hostio_readlink): Likewise.
311 (_initialize_remote): Register new "set/show remote
312 hostio-setfs-packet" command.
313 * NEWS: Announce new vFile:setfs packet.
315 2015-06-10 Gary Benson <gbenson@redhat.com>
317 * linux-nat.c (nat/linux-namespaces.h): New include.
318 (fileio.h): Likewise.
319 (linux_nat_filesystem_is_local): New function.
320 (linux_nat_fileio_pid_of): Likewise.
321 (linux_nat_fileio_open): Likewise.
322 (linux_nat_fileio_readlink): Likewise.
323 (linux_nat_fileio_unlink): Likewise.
324 (linux_nat_add_target): Initialize to_filesystem_is_local,
325 to_fileio_open, to_fileio_readlink and to_fileio_unlink.
326 (_initialize_linux_nat): New "set/show debug linux-namespaces"
328 * NEWS: Mention new "set/show debug linux-namespaces" commands.
330 2015-06-10 Gary Benson <gbenson@redhat.com>
332 * target.h (struct inferior): New forward declaration.
333 (struct target_ops) <to_filesystem_is_local>: Update comment.
334 (struct target_ops) <to_fileio_open>: New argument inf.
335 Update comment. All implementations updated.
336 (struct target_ops) <to_fileio_unlink>: Likewise.
337 (struct target_ops) <to_fileio_readlink>: Likewise.
338 (target_filesystem_is_local): Update comment.
339 (target_fileio_open): New argument inf. Update comment.
340 (target_fileio_unlink): Likewise.
341 (target_fileio_readlink): Likewise.
342 (target_fileio_read_alloc): Likewise.
343 (target_fileio_read_stralloc): Likewise.
344 * target.c (target_fileio_open): New argument inf.
345 Pass inf to implementation. Update debug printing.
346 (target_fileio_unlink): Likewise.
347 (target_fileio_readlink): Likewise.
348 (target_fileio_read_alloc_1): New argument inf. Pass inf
349 to target_fileio_open.
350 (target_fileio_read_alloc): New argument inf. Pass inf to
351 target_fileio_read_alloc_1.
352 (target_fileio_read_stralloc): Likewise.
353 * gdb_bfd.c (inferior.h): New include.
354 (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
355 argument with new argument "inferior". Pass inferior to
357 (gdb_bfd_open): Supply inferior argument to
358 gdb_bfd_iovec_fileio_open.
359 * linux-tdep.c (linux_info_proc): Supply inf argument to
360 relevant target_fileio calls.
361 (linux_find_memory_regions_full): Likewise.
362 (linux_fill_prpsinfo): Likewise.
363 * remote.c (remote_filesystem_is_local): Supply inf
364 argument to remote_hostio_open.
365 (remote_file_put): Likewise.
366 (remote_file_get): Likewise.
367 (remote_file_delete): Supply inf argument to
368 remote_hostio_unlink.
370 2015-06-10 Gary Benson <gbenson@redhat.com>
372 * inf-child.c (inf_child_fileio_open): Replace comment.
373 (inf_child_fileio_pwrite): Likewise.
374 (inf_child_fileio_pread): Likewise.
375 (inf_child_fileio_fstat): Insert blank line before comment.
376 (inf_child_fileio_close): Replace comment.
377 (inf_child_fileio_unlink): Likewise.
378 (inf_child_fileio_readlink): Likewise.
379 * remote.c (remote_hostio_open): Likewise.
380 (remote_hostio_pread): Likewise.
381 (remote_hostio_pwrite): Likewise.
382 (remote_hostio_close): Likewise.
383 (remote_hostio_unlink): Likewise.
384 (remote_hostio_readlink): Likewise.
385 (remote_hostio_fstat): Likewise.
386 (remote_filesystem_is_local): Likewise.
387 * target.c (target_fileio_open): Likewise.
388 (target_fileio_pwrite): Likewise.
389 (target_fileio_pread): Likewise.
390 (target_fileio_fstat): Insert blank line before comment.
391 (target_fileio_close): Replace comment.
392 (target_fileio_unlink): Likewise.
393 (target_fileio_readlink): Likewise.
394 (target_fileio_read_alloc): Likewise.
395 (target_fileio_read_stralloc): Likewise.
397 2015-06-10 Gary Benson <gbenson@redhat.com>
399 * linux-thread-db.c (nat/linux-namespaces.h): New include.
400 (check_pid_namespace_match): Use linux_ns_same rather than
401 linux_proc_pid_get_ns to spot PID namespace mismatches.
402 * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
403 * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
405 2015-06-10 Gary Benson <gbenson@redhat.com>
407 * configure.ac (AC_CHECK_FUNCS): Add setns.
408 * config.in: Regenerate.
409 * configure: Likewise.
410 * nat/linux-namespaces.h: New file.
411 * nat/linux-namespaces.c: Likewise.
412 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
413 (linux-namespaces.o): New rule.
414 * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
415 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
416 * config/arm/linux.mh (NATDEPFILES): Likewise.
417 * config/i386/linux.mh (NATDEPFILES): Likewise.
418 * config/i386/linux64.mh (NATDEPFILES): Likewise.
419 * config/ia64/linux.mh (NATDEPFILES): Likewise.
420 * config/m32r/linux.mh (NATDEPFILES): Likewise.
421 * config/m68k/linux.mh (NATDEPFILES): Likewise.
422 * config/mips/linux.mh (NATDEPFILES): Likewise.
423 * config/pa/linux.mh (NATDEPFILES): Likewise.
424 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
425 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
426 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
427 * config/s390/linux.mh (NATDEPFILES): Likewise.
428 * config/sparc/linux.mh (NATDEPFILES): Likewise.
429 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
430 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
431 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
433 2015-06-10 Gary Benson <gbenson@redhat.com>
435 * utils.h (make_cleanup_close): Moved to common/filestuff.h.
436 * utils.c (do_close_cleanup): Moved to common/filestuff.c.
437 (make_cleanup_close): Likewise.
438 * common/filestuff.h (make_cleanup_close): Moved from utils.h.
439 * common/filestuff.c (do_close_cleanup): Moved from utils.c.
440 (make_cleanup_close): Likewise.
442 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
444 * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
445 from SuspendThread().
447 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
449 * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
450 from OutputDebugString.
452 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
453 Mircea Gherzan <mircea.gherzan@intel.com>
455 * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
456 MPX_BT_MASK_32): New macros.
457 (i386_mpx_set_bounds): New function that implements
458 the command "set-mpx-bound".
459 (i386_mpx_enabled): Helper function to test MPX availability.
460 (i386_mpx_bd_base): Helper function to calculate the base directory
462 (i386_mpx_get_bt_entry): Helper function to access a bound
464 (i386_mpx_print_bounds): Effectively display bound information.
465 (_initialize_i386_tdep): Add new commands to commands "set mpx" and
467 (_initialize_i386_tdep):
468 Add "bound" to the commands "show mpx" and "set mpx" commands.
469 (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
470 and "show mpx" commands.
471 * NEWS: List new commands for MPX support.
473 2015-06-09 Gary Benson <gbenson@redhat.com>
475 * common/fileio.h (fileio_to_host_mode): New declaration.
476 * common/fileio.c (fileio_to_host_mode): New Function.
477 * inf-child.c (inf_child_fileio_open): Process mode argument
478 with fileio_to_host_mode.
480 2015-06-09 Gary Benson <gbenson@redhat.com>
482 * common/fileio.c (fileio_mode_pack): Fix preprocessor
485 2015-06-05 Gary Benson <gbenson@redhat.com>
487 * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
488 * remote.c (remote_filesystem_is_local): ...here.
490 2015-06-04 Yao Qi <yao.qi@linaro.org>
492 * gdbarch.c: Regenerate it.
494 2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
496 * arch-utils.c (default_infcall_munmap): New.
497 * arch-utils.h (default_infcall_munmap): New declaration.
498 * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
499 (munmap_list_free, munmap_listp_free_cleanup): New.
500 (struct setup_sections_data): Add field munmap_list_headp.
501 (setup_sections): Call munmap_list_add.
502 (compile_object_load): New variable munmap_list_head, initialize
503 setup_sections_data.munmap_list_headp, return munmap_list_head.
504 * compile/compile-object-load.h (struct munmap_list): New declaration.
505 (struct compile_module): Add field munmap_list_head.
506 (munmap_list_free): New declaration.
507 * compile/compile-object-run.c (struct do_module_cleanup): Add field
509 (do_module_cleanup): Call munmap_list_free.
510 (compile_object_run): Pass munmap_list_head to do_module_cleanup.
511 * gdbarch.c: Regenerate.
512 * gdbarch.h: Regenerate.
513 * gdbarch.sh (infcall_munmap): New.
514 * linux-tdep.c (linux_infcall_munmap): New.
515 (linux_init_abi): Install it.
517 2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
520 * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
522 2015-06-02 Yao Qi <yao.qi@linaro.org>
524 * i386-linux-nat.c: Include linux-nat.h.
526 2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
527 Jan Kratochvil <jan.kratochvil@redhat.com>
530 * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
532 * dwarf2loc.c (chain_candidate): Likewise.
534 2015-06-01 Yao Qi <yao.qi@linaro.org>
536 * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
537 (store_vfp_regs): Use PTRACE_SETREGSET.
539 2015-06-01 Yao Qi <yao.qi@linaro.org>
541 * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
542 (fetch_fpregs): Likewise.
543 * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
544 (store_fpregs): Likewise.
546 2015-06-01 Yao Qi <yao.qi@linaro.org>
548 * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
549 (fetch_regs): Likewise.
550 (store_regs): Use PTRACE_SETREGSET.
551 (store_register): Likewise.
553 2015-06-01 Yao Qi <yao.qi@linaro.org>
555 * arm-linux-nat.c (arm_linux_read_description): Check whether
556 kernel supports PTRACE_GETREGSET.
558 2015-06-01 Yao Qi <yao.qi@linaro.org>
560 * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
561 * linux-nat.c: ... here.
562 * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
564 * linux-nat.h: ... here.
566 2015-06-01 Yao Qi <yao.qi@linaro.org>
568 * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
569 * i386-linux-nat.c: Likewise.
570 * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
571 * s390-linux-nat.c: Include "nat/linux-ptrace.h".
572 (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
573 * x86-linux-nat.c: Include "nat/linux-ptrace.h".
574 * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
576 2015-05-30 Eli Zaretskii <eliz@gnu.org>
578 * go32-nat.c (go32_xfer_memory): Fix the return value to be
579 compatible to what read_child and write_child return. This
580 unbreaks that DJGPP build of GDB which was broken since v7.7.
582 2015-05-29 Martin Galvan <martin.galvan@tallertechnologies.com>
584 * MAINTAINERS (Write After Approval): Add Martin Galvan.
586 2015-05-29 Roland McGrath <mcgrathr@google.com>
589 * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
590 rather than internal_error for an unrecognized value.
592 2015-05-29 Max Filippov <jcmvbkbc@gmail.com>
594 * xtensa-tdep.c (xtensa_pseudo_register_read)
595 (xtensa_pseudo_register_write): Don't alias last pseudo register
598 2015-05-28 Don Breazeal <donb@codesourcery.com>
600 * infrun.c (follow_fork_inferior): Ensure the use of
601 process-style ptids (pid,0,0) in verbose/debug "Detaching"
604 2015-05-28 Doug Evans <dje@google.com>
606 * dwarf2read.c (record_line_ftype): Remove, duplicate.
608 2015-05-28 Yao Qi <yao.qi@linaro.org>
610 * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
611 (arm_linux_fetch_inferior_registers): Use
612 tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
613 (arm_linux_store_inferior_registers): Likewise.
614 (arm_linux_read_description): Don't set
615 arm_linux_has_wmmx_registers.
616 * arm-tdep.c (arm_gdbarch_init): Set
617 tdep->have_wmmx_registers according target descriptions.
618 * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
621 2015-05-28 Yao Qi <yao.qi@linaro.org>
623 * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
624 (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
625 instead of arm_linux_vfp_register_count.
626 (store_vfp_regs): Likewise.
627 (arm_linux_fetch_inferior_registers): Likewise.
628 (arm_linux_store_inferior_registers): Likewise.
629 (arm_linux_read_description): Don't set
630 arm_linux_vfp_register_count.
631 * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
633 * arm-tdep.c (arm_gdbarch_init): Add assert on
635 * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
636 field to vfp_register_count. All users updated.
638 2015-05-28 Kyle Huey <me@kylehuey.com> (tiny patch)
640 * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
641 ELFOSABI_GNU binaries.
643 2015-05-27 Doug Evans <dje@google.com>
645 * dwarf2read.c (lnp_state_machine): New typedef.
646 (lnp_reader_state): New typedef.
647 (dwarf_record_line_1): Renamed from dwarf_record_line.
649 (dwarf_record_line): New function.
650 (init_lnp_state_machine): New function.
651 (check_line_address): Replace p_record_line parameter with state.
653 (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
654 Update to record state in lnp_state_machine.
656 2015-05-27 Doug Evans <dje@google.com>
658 * dwarf2read.c (record_line_ftype): New typedef.
659 (check_line_address): New function.
660 (dwarf_decode_lines_1): Call it.
662 2015-05-27 Doug Evans <dje@google.com>
664 * NEWS: Mention "set debug dwarf-line".
665 * dwarf2read.c (dwarf_line_debug): New static global.
666 (add_include_dir): Add debug dwarf-line support.
667 (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
668 (_initialize_dwarf2_read): New parameter "debug dwarf-line".
670 2015-05-27 Doug Evans <dje@google.com>
672 * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
674 (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
675 * cp-support.h (cp_lookup_nested_symbol): Update.
677 2015-05-27 Doug Evans <dje@google.com>
680 * block.c (block_find_symbol): New function.
681 (block_find_non_opaque_type): Ditto.
682 (block_find_non_opaque_type_preferred): Ditto.
683 * block.h (block_symbol_matcher_ftype): New typedef.
684 (block_find_symbol): Declare.
685 (block_find_non_opaque_type): Ditto.
686 (block_find_non_opaque_type_preferred): Ditto.
687 * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
688 * psymtab.c (psym_lookup_symbol): Ditto.
689 * symtab.c (basic_lookup_transparent_type_1): New function.
690 (basic_lookup_transparent_type): Call it.
692 2015-05-27 Yao Qi <yao.qi@linaro.org>
694 * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
695 AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
697 2015-05-27 Yao Qi <yao.qi@linaro.org>
699 * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
701 (aarch64_record_load_store): Likewise.
703 2015-05-26 Doug Evans <dje@google.com>
705 PR c++/18141, c++/18417.
706 * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
709 2015-05-26 Doug Evans <dje@google.com>
711 * NEWS: Add entries for command renamings.
712 * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
714 (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated.
715 (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
717 (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
718 All callers updated. Fix spelling of DWARF in help text.
719 (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
721 (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
723 (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated.
724 (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated.
725 (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
727 (show_dwarf_always_disassemble): Renamed from
728 show_dwarf2_always_disassemble. All callers updated.
729 (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
730 "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to
731 "set/show dwarf max-cache-age". Rename
732 "set/show dwarf2 always-disassemble" to
733 "set/show dwarf always-disassemble". Rename
734 "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename
735 "set/show debug dwarf2-die" to "set/show debug dwarf-die".
737 2015-05-26 Doug Evans <dje@google.com>
740 * python/py-lazy-string.c (stpy_convert_to_value): Use
741 gdbpy_gdb_memory_error not PyExc_MemoryError.
742 (gdbpy_create_lazy_string_object): Ditto.
744 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
746 * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
748 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
750 * tui/tui-regs.c (tui_reg_prev_command): New function.
751 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
752 * reggroups.c (reggroup_prev): New function.
753 * reggroups.h (reggroup_prev): Add declaration. Update comment.
755 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
756 Yao Qi <yao.qi@linaro.org>
758 * aarch64-linux-tdep.c: Include linux-record.h and
760 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
761 (aarch64_syscall): New enum.
762 (aarch64_canonicalize_syscall): New function.
763 (aarch64_all_but_pc_registers_record): New function.
764 (aarch64_linux_syscall_record): New function.
765 (aarch64_linux_init_abi): Install AArch64 process record
766 handler. Update to handle syscall recording.
767 * aarch64-tdep.c: Include record.h and record-full.h.
768 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
769 (struct aarch64_mem_r): Define.
770 (aarch64_record_result): New enum.
771 (struct insn_decode_record): Define.
772 (insn_decode_record): New typedef.
773 (aarch64_record_data_proc_reg): New function.
774 (aarch64_record_data_proc_imm): New function.
775 (aarch64_record_branch_except_sys): New function.
776 (aarch64_record_load_store): New function.
777 (aarch64_record_data_proc_simd_fp): New function.
778 (aarch64_record_asimd_load_store): New function.
779 (aarch64_record_decode_insn_handler): New function.
780 (deallocate_reg_mem): New function.
781 (aarch64_process_record): New function.
782 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
784 (aarch64_process_record): New extern declaration.
785 * configure.tgt: Add linux-record.o to gdb_target_obs.
786 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
788 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
790 * NEWS: Add a note on process record-replay support on aarch64*-linux*
793 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
795 * amd64-tdep.c: Replace in_function_epilogue_p with
796 stack_frame_destroyed_p throughout.
797 * arch-utils.c: Ditto.
798 * arch-utils.h: Ditto.
800 * breakpoint.c: Ditto.
802 * hppa-tdep.c: Ditto.
803 * i386-tdep.c: Ditto.
804 * mips-tdep.c: Ditto.
805 * nios2-tdep.c: Ditto.
806 * rs6000-tdep.c: Ditto.
807 * s390-linux-tdep.c: Ditto.
808 * score-tdep.c: Ditto.
810 * sparc-tdep.c: Ditto.
811 * sparc-tdep.h: Ditto.
812 * sparc64-tdep.c: Ditto.
814 * tic6x-tdep.c: Ditto.
815 * tilegx-tdep.c: Ditto.
816 * xstormy16-tdep.c: Ditto.
817 * gdbarch.c, gdbarch.h: Re-generated.
819 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
821 * NEWS: Mention 'tui enable' and 'tui disable'.
822 * tui/tui.c (tui_enable_command): New function.
823 (tui_disable_command): New function.
824 (_initialize_tui): New function.
826 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
828 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
830 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
832 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
835 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
837 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
839 (tui_set_layout_for_display_command): ...here, before calling
840 tui_set_layout. Only set the layout if gdb has not already
841 entered the TUI_FAILURE state.
843 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
845 * tui/tui-layout.c (layout_completer): New function.
846 (_initialize_tui_layout): Set completer on layout command.
848 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
850 * tui/tui-layout.c (tui_set_layout): Remove
851 tui_register_display_type parameter. Remove all checking of this
852 parameter, and reindent function. Update header comment.
853 (tui_set_layout_for_display_command): Rename to...
854 (tui_set_layout_by_name): ...this, and don't check for different
855 register class types, don't pass a tui_register_display_type to
856 tui_set_layout. Update header comment.
857 (layout_names): Remove register set specific names.
858 * tui/tui-layout.h (tui_set_layout): Remove
859 tui_register_display_type parameter.
860 * tui/tui.c (tui_rl_change_windows): Don't pass a
861 tui_register_display_type to tui_set_layout.
862 (tui_rl_delete_other_windows): Likewise.
863 (tui_enable): Likewise.
864 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
865 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
866 (TUI_GENERAL_REGS_NAME): Remove.
867 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
868 (TUI_SPECIAL_REGS_NAME): Remove.
869 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
870 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
871 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
872 (enum tui_register_display_type): Remove.
873 (struct tui_layout_def): Remove regs_display_type and
874 float_regs_display_type fields.
875 (struct tui_data_info): Remove regs_display_type field.
876 (tui_layout_command): Use new name for
877 tui_set_layout_for_display_command.
878 * tui/tui-data.c (layout_def): Don't initialise removed fields.
879 (tui_clear_win_detail): Don't initialise removed fields of
881 * tui/tui-regs.c (tui_show_registers): Use new name for
882 tui_set_layout_for_display_command.
883 * tui/tui.h (tui_set_layout_for_display_command): Rename
885 (tui_set_layout_by_name): ...this.
886 * printcmd.c (display_command): Remove tui related layout call,
889 2015-05-20 Joel Brobecker <brobecker@adacore.com>
891 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
892 (handle_inferior_event): New function.
894 2015-05-20 Joel Brobecker <brobecker@adacore.com>
896 * ada-lang.c (to_fixed_array_type): Rename local variable
897 typename into type_name.
899 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
901 Fix ASAN crash for gdb.compile/compile.exp.
902 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
904 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
906 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
907 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
908 * compile/compile-object-load.c (setup_sections, compile_object_load):
910 * compile/compile.c (compile_to_object): Likewise.
912 2015-05-16 Doug Evans <xdje42@gmail.com>
914 * NEWS: Mention support for unbuffered Guile memory ports.
915 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
916 (ioscm_lseek_address): Improve overflow calculation.
917 (gdbscm_memory_port_fill_input): Add assert.
918 (gdbscm_memory_port_write): Handle unbuffered ports.
919 Handle large writes identical to Guile's fport_write.
920 (gdbscm_memory_port_seek): Fix seeking past end check.
921 (gdbscm_memory_port_close): Handle closing unbuffered port.
922 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
923 (ioscm_init_memory_port): Handle unbuffered ports.
924 (ioscm_reinit_memory_port): Ditto.
925 (ioscm_init_memory_port): Update size calculation.
926 (gdbscm_open_memory): Support zero sized ports.
928 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
930 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
931 variable compiler warnings.
933 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
935 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
937 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
938 Phil Muldoon <pmuldoon@redhat.com>
940 * NEWS (Changes since GDB 7.9): Add compile print.
941 * compile/compile-c-support.c (add_code_header, add_code_footer)
942 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
943 COMPILE_I_PRINT_VALUE_SCOPE.
944 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
945 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
947 * compile/compile-object-load.c: Include block.h.
948 (get_out_value_type): New function.
949 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
950 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
952 * compile/compile-object-load.h (struct compile_module): Add fields
953 out_value_addr and out_value_type.
954 * compile/compile-object-run.c: Include valprint.h and compile.h.
955 (struct do_module_cleanup): Add fields out_value_addr and
957 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
958 COMPILE_I_PRINT_VALUE_SCOPE.
959 (compile_object_run): Propagate out_value_addr and out_value_type.
961 * compile/compile.c: Include valprint.h.
962 (compile_print_value, compile_print_command): New functions.
963 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
964 (_initialize_compile): Update compile code help text. Install
965 compile_print_command.
966 * compile/compile.h (compile_print_value): New prototype.
967 * defs.h (enum compile_i_scope_types): Add
968 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
970 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
972 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
973 Rely on its parameter count.
974 (compile_object_load): Replace lookup_minimal_symbol_text by
975 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
977 * compile/compile-object-load.h (struct compile_module): Replace
978 func_addr by func_sym.
979 * compile/compile-object-run.c: Include block.h.
980 (compile_object_run): Reset module variable after it is freed. Use
981 FUNC_SYM instead of FUNC_ADDR. Rely on it.
983 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
985 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
986 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
987 (c_compute_program): Call generate_register_struct after typedefs.
988 * compile/compile-loc2c.c (push, pushf_register_address)
989 (pushf_register): Cast to GCC_UINTPTR.
990 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
991 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
992 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
993 * compile/compile.c (_initialize_compile): Enable warnings for
996 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
998 * cli/cli-script.c (execute_control_command): Update
999 eval_compile_command caller.
1000 * compile/compile-object-load.c (compile_object_load): Add parameters
1001 scope and scope_data. Set them.
1002 * compile/compile-object-load.h (struct compile_module): Add fields
1003 scope and scope_data.
1004 (compile_object_load): Add parameters scope and scope_data.
1005 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
1006 scope and scope_data.
1007 (compile_object_run): Propagate the fields scope and scope_data.
1008 * compile/compile.c (compile_file_command, compile_code_command):
1009 Update eval_compile_command callers.
1010 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
1011 * compile/compile.h (eval_compile_command): Add parameter scope_data.
1012 * defs.h (struct command_line): Add field scope_data.
1014 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1016 * printcmd.c (struct format_data): Move it to valprint.h.
1017 (print_command_parse_format, print_value): New functions from ...
1018 (print_command_1): ... here. Call them.
1019 * valprint.h (struct format_data): Move it here from printcmd.c.
1020 (print_command_parse_format, print_value): New declarations.
1022 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1024 * compile/compile-object-load.c (compile_object_load): Add
1025 COMPILE_DEBUG message.
1027 2015-05-15 Jerome Guitton <guitton@adacore.com>
1029 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
1030 index to get element instead of enum value.
1031 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
1032 of index to compute length, but enum values to compute bounds.
1033 (ada_array_length): Use enum position of index instead of enum value.
1034 (pos_atr): Move position computation to...
1035 (ada_evaluate_subexp): Use enum values to compute bounds.
1036 * gdbtypes.c (discrete_position): ...this new function.
1037 * gdbtypes.h (discrete_position): New function declaration.
1038 * valprint.c (val_print_array_elements): Call discrete_position
1039 to handle array indexed by non-contiguous enumeration types.
1041 2015-05-15 Jerome Guitton <guitton@adacore.com>
1043 * ada-lang.c (find_parallel_type_by_descriptive_type):
1044 Go through typedefs during lookup.
1045 (to_fixed_array_type): Add support for non-bit packed arrays
1046 as variable-length fields.
1048 2015-05-15 Pedro Alves <palves@redhat.com>
1049 Simon Marchi <simon.marchi@ericsson.com>
1051 * event-loop.c (gdb_notifier) <next_file_handler,
1052 next_poll_fds_index>: New fields.
1053 (get_next_file_handler_to_handle_and_advance): New function.
1054 (delete_file_handler): If deleting the next file handler to
1055 handle, advance to the next file handler.
1056 (gdb_wait_for_event): Bail early if no event fired. Poll file
1057 handlers in round-robin fashion.
1059 2015-05-15 Pedro Alves <palves@redhat.com>
1061 * linux-tdep.c (linux_find_memory_regions_full): Rename local
1062 'private' to 'priv'.
1064 2015-05-15 Pedro Alves <palves@redhat.com>
1066 * nat/linux-nat.h: Include "target/waitstatus.h".
1068 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
1070 * python/py-unwind.c (struct reg_info): Move out of ...
1071 (struct cached_frame_info): ... this scope.
1072 (pending_frame_object_type, unwind_info_object_type): Make extern.
1074 2015-05-15 Joel Brobecker <brobecker@adacore.com>
1076 * ada-lang.c (ada_value_primitive_packed_val): Make sure
1077 accumSize is never negative.
1079 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
1081 * tui/tui-command.c: Remove include of <ctype.h>.
1082 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
1084 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
1086 * dwarf2read.c (die_needs_namespace): Return 1 for
1087 DW_TAG_inlined_subroutine.
1089 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1091 * regcache.c (regcache_cpy_no_passthrough): New declaration.
1092 (regcache_cpy_no_passthrough): Make it static, add function comment.
1093 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
1094 (regcache_cpy_no_passthrough): Remove declaration.
1096 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1098 * gdbthread.h (struct thread_control_state): Update comment for
1100 * infcall.c (run_inferior_call): Update comment about
1102 * infcmd.c (get_return_value): Update comment about stop_registers.
1103 (finish_forward): Update comment about proceed_to_finish.
1104 * infrun.c (stop_registers): Remove.
1105 (clear_proceed_status, normal_stop): Remove stop_registers handling.
1106 * infrun.h (stop_registers): Remove.
1108 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1110 * infcall.c (struct dummy_frame_context_saver)
1111 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
1112 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1113 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1115 (call_function_by_hand_dummy): Move discard_cleanups of
1116 inf_status_cleanup before dummy_frame_push. Call
1117 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
1118 Use dummy_frame_context_saver_get_regs instead of stop_registers.
1119 * infcall.h (struct dummy_frame_context_saver)
1120 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1121 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1123 * infcmd.c: Include infcall.h.
1124 (get_return_value): Add parameter ctx_saver, use it instead of
1126 (print_return_value): Add parameter ctx_saver, pass it.
1127 (struct finish_command_continuation_args): Add field ctx_saver.
1128 (finish_command_continuation): Update print_return_value caller.
1129 (finish_command_continuation_free_arg): Free also ctx_saver.
1130 (finish_forward): Call dummy_frame_context_saver_setup.
1131 * inferior.h (struct dummy_frame_context_saver): New declaration.
1132 (get_return_value): Add parameter ctx_saver.
1133 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
1134 get_return_value caller.
1136 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1138 * dummy-frame.c (struct dummy_frame_dtor_list): New.
1139 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
1140 (remove_dummy_frame): Process dtor_list.
1141 (pop_dummy_frame): Process dtor_list.
1142 (register_dummy_frame_dtor): Maintain dtor_list.
1143 (find_dummy_frame_dtor): Handle dtor_list.
1144 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
1147 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1149 * compile/compile-object-run.c (do_module_cleanup): Add parameter
1151 (compile_object_run): Update do_module_cleanup caller.
1152 * dummy-frame.c: Include infcall.h.
1153 (struct dummy_frame): Update dtor comment.
1154 (remove_dummy_frame): Call dtor.
1155 (pop_dummy_frame): Update dtor caller.
1156 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
1159 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1163 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1165 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
1166 Xmethods now being able to specify a result type to that new
1169 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1171 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
1172 first before resizing the window.
1173 * tui/tui.c (tui_enable): Likewise.
1175 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1177 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
1178 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
1179 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
1180 dummy_dtor parameter.
1181 * infcall.h: Include dummy-frame.h.
1182 (call_function_by_hand_dummy_dtor_ftype): Remove.
1183 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
1186 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1189 * top.c (history_size_setshow_var): Change type to signed.
1190 Initialize to -2. Update documentation.
1191 (set_readline_history_size): Define.
1192 (set_history_size_command): Use it. Remove logic for handling
1194 (init_history): Use set_readline_history_size(). Test for a
1195 value of -2 instead of 0 when determining whether to set a
1196 default history size.
1197 (init_main): Decode the argument of the "size" command as a
1198 zuinteger_unlimited.
1200 2015-05-12 Doug Evans <dje@google.com>
1202 * dwarf2read.c (struct file_entry): Tweak comments.
1203 (get_debug_line_section): Tweak comments.
1205 2015-05-12 Don Breazeal <donb@codesourcery.com>
1207 * NEWS: Announce fork support in the RSP and support
1208 for fork debugging in extended mode.
1210 2015-05-12 Don Breazeal <donb@codesourcery.com>
1212 * remote.c (remote_insert_fork_catchpoint): New function.
1213 (remote_remove_fork_catchpoint): New function.
1214 (remote_insert_vfork_catchpoint): New function.
1215 (remote_remove_vfork_catchpoint): New function.
1216 (pending_fork_parent_callback): New function.
1217 (remove_new_fork_child): New function.
1218 (remote_update_thread_list): Call remote_notif_get_pending_events
1219 and remove_new_fork_child.
1220 (extended_remote_kill): Kill fork child when killing the
1221 parent before follow_fork completes.
1222 (init_extended_remote_ops): Initialize target vector with
1223 new fork catchpoint functions.
1225 2015-05-12 Don Breazeal <donb@codesourcery.com>
1227 * remote.c (remove_vfork_event_p): New function.
1228 (remote_follow_fork): Add vfork event type to event checking.
1229 (remote_parse_stop_reply): New stop reasons "vfork" and
1230 "vforkdone" for RSP 'T' Stop Reply Packet.
1232 2015-05-12 Don Breazeal <donb@codesourcery.com>
1234 * linux-nat.c (linux_nat_ptrace_options): New function.
1235 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
1236 Call linux_nat_ptrace_options and use different argument to
1237 linux_enable_event_reporting.
1238 (_initialize_linux_nat): Delete call to
1239 linux_ptrace_set_additional_flags.
1240 * nat/linux-ptrace.c (current_ptrace_options): Rename to
1241 supported_ptrace_options.
1242 (additional_flags): Delete variable.
1243 (linux_check_ptrace_features): Use supported_ptrace_options.
1244 (linux_test_for_tracesysgood, linux_test_for_tracefork):
1245 Likewise, and remove additional_flags check.
1246 (linux_enable_event_reporting): Change 'attached' argument to
1247 'options'. Use supported_ptrace_options.
1248 (ptrace_supports_feature): Change comment. Use
1249 supported_ptrace_options.
1250 (linux_ptrace_set_additional_flags): Delete function.
1251 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
1252 Delete function prototype.
1253 * remote.c (remote_fork_event_p): New function.
1254 (remote_detach_pid): New function.
1255 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
1256 if doing detach-on-fork.
1257 (remote_follow_fork): New function.
1258 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
1259 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
1260 (init_extended_remote_ops): Initialize to_follow_fork.
1262 2015-05-12 Don Breazeal <donb@codesourcery.com>
1264 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
1265 from static to extern.
1266 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
1267 * remote.c (anonymous enum): <PACKET_fork_event_feature,
1268 * PACKET_vfork_event_feature>: New enumeration constants.
1269 (remote_protocol_features): Add table entries for new packets.
1270 (remote_query_supported): Add new feature queries to qSupported
1273 2015-05-12 Gary Benson <gbenson@redhat.com>
1275 * remote.c (remote_add_inferior): Call exec_file_locate_attach
1276 for fake PIDs as well as real ones.
1277 (remote_pid_to_exec_file): Send empty annex if PID is fake.
1279 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
1281 * NEWS (Python Scripting): Mention the new gdb.Value methods.
1282 * python/py-value.c (valpy_reference_value): New function.
1283 (valpy_const_value): Likewise.
1284 (value_object_methods): Add new methods.
1285 * value.c (make_cv_value): New function.
1286 * value.h (make_cv_value): Declare.
1288 2015-05-08 Yao Qi <yao@codesourcery.com>
1289 Sandra Loosemore <sandra@codesourcery.com>
1291 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
1292 to 'lh->include_dirs' before accessing to it.
1293 (psymtab_include_file_name): Likewise.
1294 (dwarf_decode_lines_1): Likewise.
1295 (dwarf_decode_lines): Likewise.
1296 (file_file_name): Likewise.
1298 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
1300 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
1301 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
1302 (nios2_linux_rt_sigreturn_init): Adjust base address of
1305 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
1307 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
1308 "trap 31" as the breakpoint instruction on all targets.
1310 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1312 * infcmd.c (print_return_value): Remove unused declaration.
1314 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1316 * dwarf2read.c (attr_to_dynamic_prop)
1317 <DW_AT_data_member_location>: Use read_type_die isntead of
1320 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1322 * ada-lang.c (ada_convert_actual): Add handling of formals
1323 passed inside an aligner type.
1325 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1327 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
1329 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
1332 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
1333 Print xmethod matcher status.
1335 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
1337 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
1338 register in the regcache when treating the PSWM register, and vice
1341 2015-05-07 Gary Benson <gbenson@redhat.com>
1343 * linux-thread-db.c (struct thread_db_info)
1344 <td_ta_map_id2thr_p>: Remove field.
1345 (try_thread_db_load_1): Remove initialization for the above.
1347 2015-05-07 Gary Benson <gbenson@redhat.com>
1349 * linux-thread-db.c (struct thread_db_info)
1350 <td_thr_validate_p>: Remove field.
1351 (try_thread_db_load_1): Remove initialization for the above.
1353 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1355 * compile/compile-object-load.c (compile_object_load): Support
1358 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1360 * compile/compile.c (compile_to_object): Make the cmd_string parameter
1361 const. Use new variables for the const compatibility.
1362 (eval_compile_command): Make the cmd_string parameter const.
1363 * compile/compile.h (eval_compile_command): Make the cmd_string
1366 2015-05-06 Joel Brobecker <brobecker@adacore.com>
1368 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
1370 * top.c (deprecated_init_ui_hook): Delete.
1371 (gdb_init): Remove handling of deprecated_init_ui_hook.
1372 * interps.c (clear_interpreter_hooks): Remove handling of
1373 deprecated_init_ui_hook.
1374 * main.c (captured_main): Update comment.
1376 2015-05-06 Joel Brobecker <brobecker@adacore.com>
1378 * solib.c (_initialize_solib): Add "info dll" alias creation.
1379 * windows-nat.c (set_windows_aliases): Delete.
1380 (_initialize_windows_nat): Remove deprecated_init_ui_hook
1382 * NEWS: Add news entry about "info dll" now being available
1385 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1387 * ada-lang.c (value_assign_to_component): Reformat and improve
1388 documentation. Remove all trailing spaces.
1390 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1392 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
1393 Stop counting inlined frames as soon as an out-of-line function
1396 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
1398 * dwarf2read.c (inherit_abstract_dies): Skip
1399 DW_TAG_GNU_call_site dies while inheriting children of an
1400 abstract DIE into a scope.
1401 (read_lexical_block_scope): Inherit abstract DIE's for
1404 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1406 * ada-valprint.c (val_print_packed_array_elements): Delete
1407 variable "len". Add a type-length check when comparing two
1408 consecutive elements of the array. Use the element's actual
1409 length in call to value_contents_eq.
1410 * ada-lang.c (ada_value_primitive_packed_val): Always return
1411 a value whose type has been resolved.
1413 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1415 * ada-lang.c (ada_value_primitive_packed_val): Recompute
1416 BIT_SIZE and LEN if the size of the resolved type is smaller
1417 than BIT_SIZE * HOST_CHAR_BIT.
1419 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1421 * ada-lang.c (ada_value_primitive_packed_val): Use a more
1422 correct address in call to value_at. Adjust call to
1423 value_address accordingly.
1425 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1427 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
1430 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1432 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
1433 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
1435 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
1436 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
1437 (resolve_dynamic_type_internal): Set pinfo.valaddr.
1438 Add handling of addr_stack->valaddr.
1439 (resolve_dynamic_type): Add "valaddr" parameter.
1440 Set pinfo.valaddr field.
1441 * ada-lang.c (ada_discrete_type_high_bound): Update call to
1442 resolve_dynamic_type.
1443 (ada_discrete_type_low_bound): Likewise.
1444 * findvar.c (default_read_var_value): Likewise.
1445 * value.c (value_from_contents_and_address): Likewise.
1447 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1449 * gdbtypes.c (resolve_dynamic_array): Use
1450 create_array_type_with_stride instead of create_array_type.
1452 2015-04-30 DJ Delorie <dj@redhat.com>
1454 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
1457 2015-04-29 Doug Evans <dje@google.com>
1460 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
1461 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
1462 EVAL_AVOID_SIDE_EFFECTS for xmethods.
1463 * extension-priv.h (struct extension_language_ops)
1464 <get_xmethod_result_type>: New member.
1465 * extension.c (get_xmethod_result_type): New function.
1466 * extension.h (get_xmethod_result_type): Declare.
1467 * python/py-xmethods.c (get_result_type_method_name): New static
1469 (py_get_result_type_method_name): Ditto.
1470 (gdbpy_get_xmethod_result_type): New function.
1471 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
1472 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
1473 * python/python.c (python_extension_ops): Add
1474 gdbpy_get_xmethod_result_type.
1475 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
1476 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
1478 (value_x_unop): Ditto.
1479 * value.c (result_type_of_xmethod): New function.
1480 * value.h (result_type_of_xmethod): Declare.
1482 2015-04-29 Gary Benson <gbenson@redhat.com>
1484 * solib.c (solib_find_1): Allow fd argument to be NULL.
1485 (exec_file_find): Update comment.
1486 (solib_find): Likewise.
1487 * exec.c (exec_file_locate_attach): Use NULL as fd
1488 argument to exec_file_find to avoid having to close
1490 * infrun.c (follow_exec): Likewise.
1492 2015-04-28 Doug Evans <dje@google.com>
1495 * python/lib/gdb/printing.py (register_pretty_printer): Handle
1496 name or __name__ attributes. Handle gdb module as first argument.
1498 2015-04-28 Doug Evans <dje@google.com>
1501 * python/py-prettyprint.c (print_children): Verify result of children
1502 iterator. Provide better error message.
1503 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
1504 * python/python.c (gdbpy_print_python_errors_p): New function.
1506 2015-04-28 Doug Evans <dje@google.com>
1508 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
1510 2015-04-28 Sasha Smundak <asmundak@google.com>
1512 * NEWS: Mention gdb.Type.optimized_out method.
1513 * python/py-type.c (typy_optimized_out): New function.
1515 2015-04-28 John Baldwin <jhb@FreeBSD.org>
1517 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
1519 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1521 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
1522 (initialize_utils): Move call of init_page_info() to ...
1523 * top.c (gdb_init): ... here.
1525 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1527 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
1528 (tui_sigwinch_handler): Still update our idea of
1529 the terminal's width and height even when TUI is not active.
1531 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1533 * utils.h (set_screen_width_and_height): Declare.
1534 * utils.c (set_screen_width_and_height): Define.
1535 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
1537 2015-04-28 Gary Benson <gbenson@redhat.com>
1539 * infrun.c (solist.h): New include.
1540 (follow_exec): Use exec_file_find to prefix execd_pathname
1543 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1545 * tui/tui-source.c (tui_set_source_content): Avoid calling
1546 strcpy() when offset is 0.
1548 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1551 * tui/tui-data.c (tui_free_window): Don't free the locator
1552 window when passed an SRC_WIN or a DISASSEM_WIN.
1554 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1556 * tui/tui-data.h (struct tui_win_element): Forward-declare.
1557 (tui_win_content): Move declaration.
1558 (struct tui_gen_win_info): Give 'content' field the
1559 type tui_win_content.
1560 * tui/tui-data.c (init_content_element): Remove redundant and
1562 (tui_add_content_elements): Remove erroneous cast.
1563 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
1565 (tui_get_begin_asm_address): Likewise.
1566 * tui/tui-regs.c (tui_show_registers): Likewise.
1567 (tui_show_register_group): Likewise.
1568 (tui_display_registers_from): Likewise.
1569 (tui_check_register_values): Likewise.
1570 * tui/tui-source.c (tui_set_source_content): Likewise.
1571 (tui_set_source_content_nil): Likewise.
1572 (tui_source_is_displayed): Likewise.
1573 * tui/tui-stack.c (tui_show_locator_content): Likewise.
1574 (tui_set_locator_fullname): Likewise.
1575 (tui_set_locator_info): Likewise.
1576 (tui_show_frame_info): Likewise.
1577 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
1578 (tui_show_source_line): Likewise.
1579 (tui_horizontal_source_scroll): Likewise.
1580 (tui_update_breakpoint_info): Likewise.
1581 (tui_set_exec_info_content): Likewise.
1582 (tui_show_exec_info_content): Likewise.
1583 (tui_alloc_source_buffer): Likewise.
1584 (tui_line_is_displayed): Likewise.
1585 (tui_addr_is_displayed): Likewise.
1587 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1589 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
1590 event if PL_FLAG_EXEC is set.
1591 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
1592 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
1593 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
1594 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
1595 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
1597 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1599 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
1600 [TDP_RFPPWAIT] New variable fbsd_pending_children.
1601 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
1602 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
1603 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
1604 [PT_LWPINFO] (fbsd_wait): New function.
1605 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
1606 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
1607 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
1608 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
1609 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
1610 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
1611 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
1612 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
1613 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
1615 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
1616 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
1617 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
1618 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
1619 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
1620 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
1621 Set "to_post_attach" to "fbsd_post_attach".
1623 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1625 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
1626 (fbsd_find_memory_regions): Mark static.
1627 (fbsd_nat_add_target): New function.
1628 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
1629 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
1630 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
1631 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
1632 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
1633 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
1635 2015-04-27 Gary Benson <gbenson@redhat.com>
1637 * objfiles.c (allocate_objfile): Do not attempt to expand name
1638 if name is a "target:" filename.
1639 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
1640 to load auto-load scripts for objfiles with "target:" filenames.
1642 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1644 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
1645 (enum s390_vector_abi_kind): New enum.
1646 (struct gdbarch_tdep)<vector_abi>: New field.
1647 (s390_effective_inner_type): Add parameter min_size. Stop
1648 unwrapping if the inner type is smaller than min_size.
1649 (s390_function_arg_float): Adjust call to
1650 s390_effective_inner_type.
1651 (s390_function_arg_vector): New function.
1652 (s390_function_arg_integer): Adjust comment.
1653 (struct s390_arg_state)<vr>: New field.
1654 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
1655 arguments according to vector ABI when appropriate.
1656 (s390_push_dummy_call): Initialize the argument state's field
1657 'vr'. Adjust calls to s390_handle_arg.
1658 (s390_register_return_value): Handle vector return values.
1659 (s390_return_value): Apply the "register" return value convention
1660 to a vector when appropriate.
1661 (s390_gdbarch_init): Initialize tdep->vector_abi.
1662 * NEWS: Announce S390 vector ABI support.
1664 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1666 * s390-linux-tdep.c (s390_return_value_convention): Remove
1667 function. Inline its logic...
1668 (s390_return_value): ...here. Instead, move the handling of the
1669 "register" return value convention...
1670 (s390_register_return_value): ...here. New function.
1672 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1675 (is_float_singleton): Remove function. Move the "singleton" part
1677 (s390_effective_inner_type): ...here. New function.
1678 (is_float_like): Remove function. Inline its logic...
1679 (s390_function_arg_float): ...here.
1680 (is_pointer_like, is_integer_like, is_struct_like): Remove
1681 functions. Inline their logic...
1682 (s390_function_arg_integer): ...here.
1683 (s390_function_arg_pass_by_reference): Remove function.
1684 (extend_simple_arg): Remove function.
1685 (alignment_of): Remove function.
1686 (struct s390_arg_state): New structure.
1687 (s390_handle_arg): New function.
1688 (s390_push_dummy_call): Move parameter placement logic to the new
1689 function s390_handle_arg. Call it for calculating the stack area
1690 sizes first, and again for actually writing the parameters.
1692 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1694 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
1695 false if the argument is zero.
1697 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
1699 * ada-lang.c (template_to_static_fixed_type): Return input type
1700 when it is already fixed. Cache the input type itself when not
1701 creating a static fixed copy. Make it explicit that we never
1702 molestate the input type.
1703 * gdbtypes.c (resolve_dynamic_struct): Reset the
1704 TYPE_TARGET_TYPE field for resolved copies.
1706 2015-04-27 Joel Brobecker <brobecker@adacore.com>
1708 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
1709 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
1710 (template_to_static_fixed_type): Call ada_check_typedef only
1713 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
1715 * cli/cli-dump.c (srec_dump_command): Add internationalization
1717 (ihex_dump_command): Likewise.
1718 (tekhex_dump_command): Likewise.
1719 (binary_dump_command): Likewise.
1720 (binary_append_command): Likewise.
1722 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
1724 * cli/cli-dump.c (verilog_cmdlist): New variable.
1725 (dump_verilog_memory): New function.
1726 (dump_verilog_value): New function.
1727 (verilog_dump_command): New function.
1728 (_initialize_cli_dump): Add new commands to support verilog dump
1730 * NEWS: Add entry for "dump verilog".
1732 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
1734 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
1735 descriptive type when there is none.
1737 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
1739 * tui/tui-win.c (tui_async_resize_screen): Call
1740 rl_resize_terminal().
1742 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
1744 * windows-nat.c (handle_output_debug_string): Don't change
1745 current_event.dwThreadId.
1746 (get_windows_debug_event): Use thread_id, rather than relying on
1747 current_event.dwThreadId being changed.
1749 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
1751 * windows-nat.c (windows_continue): Report an error if
1752 ContinueDebugEvent() fails.
1754 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1756 * windows-nat.c (windows_resume): Fix misspelling in debug output.
1758 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1760 * windows-nat.c (get_windows_debug_event): Replace retval with
1761 thread_id throughout. Update stale comment.
1763 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1765 * windows-nat.c (get_windows_debug_event): Don't use ternary
1766 conditional operator.
1768 2015-04-21 Pierre Muller <muller@sourceware.org>
1771 p-exp.y (yylex): Reorganize code to return the matched pattern
1772 for a field of this.
1774 2015-04-21 Gary Benson <gbenson@redhat.com>
1776 * common/fileio.h (fileio_to_host_openflags): New declaration.
1777 * common/fileio.c (fcntl.h): New include.
1778 (fileio_to_host_openflags): New function, factored out from...
1779 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
1782 2015-04-21 Kevin Buettner <kevinb@redhat.com>
1784 * rl78-tdep.c (RL78_SP_ADDR): Define.
1785 (opc_reg_to_gdb_regnum): New static function.
1786 (rl78_analyze_prologue): Recognize instructions forming slightly
1787 more interesting prologues.
1789 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
1792 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1793 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
1794 TYPE_CODE_REF types so that they are not considered as dynamic
1795 depending on the referenced type.
1796 (resolve_dynamic_type_internal): Likewise.
1798 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
1801 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1802 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
1803 "top_level" parameter.
1804 (resolve_dynamic_type_internal): Remove the unused "top_level"
1805 parameter. Update call to is_dynamic_type_internal.
1806 (is_dynamic_type): Update call to is_dynamic_type_internal.
1807 (resolve_dynamic_range): Update call to
1808 resolve_dynamic_type_internal.
1809 (resolve_dynamic_union): Likewise.
1810 (resolve_dynamic_struct): Likewise.
1811 (resolve_dynamic_type): Likewise.
1813 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
1815 * breakpoint.c (update_dprintf_command_list): Remove duplicated
1818 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
1820 * reply_mig_hack.awk: Robustify parsing.
1822 * reply_mig_hack.awk: Don't bother to declare an intermediate
1823 function pointer variable.
1825 2015-04-17 Doug Evans <dje@google.com>
1827 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
1828 to "exec_displacement" to avoid confusion with inner use of the name.
1830 2015-04-17 Pedro Alves <palves@redhat.com>
1832 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
1833 if HW point of TYPE isn't supported.
1835 2015-04-17 Yao Qi <yao.qi@linaro.org>
1836 Pedro Alves <palves@redhat.com>
1838 * target.h (target_can_use_hardware_watchpoint): Update comments.
1839 Remove trailing ";".
1841 2015-04-17 Gary Benson <gbenson@redhat.com>
1843 * remote.c (remote_add_inferior): New argument try_open_exec.
1844 If nonzero, attempt to open the inferior's executable file as
1845 the main executable if no main executable is open already.
1846 All callers updated.
1847 * NEWS: Mention that GDB now supports automatic location and
1848 retrieval of executable + files from remote targets.
1850 2015-04-17 Gary Benson <gbenson@redhat.com>
1852 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
1853 * remote.c (PACKET_qXfer_exec_file): Likewise.
1854 (remote_protocol_features): Register the
1855 "qXfer:exec-file:read" feature.
1856 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
1857 (remote_pid_to_exec_file): New function.
1858 (init_remote_ops): Initialize to_pid_to_exec_file.
1859 (_initialize_remote): Register new "set/show remote
1860 pid-to-exec-file-packet" command.
1861 * NEWS: Announce new qXfer:exec-file:read packet.
1863 2015-04-17 Gary Benson <gbenson@redhat.com>
1865 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
1867 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
1868 New function, factored out from...
1869 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
1871 2015-04-17 Gary Benson <gbenson@redhat.com>
1873 * exec.c (solist.h): New include.
1874 (exec_file_locate_attach): Prefix absolute executable
1875 paths with gdb_sysroot if set.
1876 * NEWS: Mention that executable paths may be prepended
1879 2015-04-17 Gary Benson <gbenson@redhat.com>
1881 * solist.h (exec_file_find): New declaration.
1882 * solib.c (solib_find_1): New function, factored out from...
1883 (solib_find): ...here.
1884 (exec_file_find): New function.
1886 2015-04-17 Gary Benson <gbenson@redhat.com>
1888 * gdbcore.h (exec_file_locate_attach): New declaration.
1889 * exec.c (exec_file_locate_attach): New function, factored
1891 * infcmd.c (attach_command_post_wait): ...here.
1893 2015-04-17 Mike Frysinger <vapier@gentoo.org>
1895 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
1897 2015-04-16 Yao Qi <yao.qi@linaro.org>
1899 * infrun.c (maybe_software_singlestep): Declare.
1900 (displaced_step_fixup): Call maybe_software_singlestep.
1902 2015-04-15 Doug Evans <dje@google.com>
1904 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
1906 2015-04-15 Doug Evans <dje@google.com>
1908 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
1910 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
1912 * python/lib/gdb/command/unwinders.py: Add parentheses.
1914 2015-04-15 Yao Qi <yao.qi@linaro.org>
1916 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
1918 2015-04-15 Yao Qi <yao.qi@linaro.org>
1920 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
1922 2015-04-15 Yao Qi <yao.qi@linaro.org>
1924 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
1925 dsc->insn_size instead of 4.
1927 2015-04-14 Gary Benson <gbenson@redhat.com>
1929 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
1930 * minidebug.c (lzma_stat): Likewise.
1931 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
1932 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
1934 2015-04-13 Stan Shebs <stanshebs@google.com>
1936 * MAINTAINERS: Update my email address.
1938 2015-04-13 John Baldwin <jhb@FreeBSD.org>
1940 * amd64-tdep.c (amd64_target_description): New function.
1941 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
1942 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
1943 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1944 x86 extended save area.
1945 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1946 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
1947 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
1948 (_initialize_amd64fbsd_nat): Set "to_read_description" to
1949 "amd64fbsd_read_description".
1950 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
1951 (amd64fbsd_supply_xstateregset): New function.
1952 (amd64fbsd_collect_xstateregset): New function.
1953 Add "amd64fbsd_xstateregset".
1954 (amd64fbsd_iterate_over_regset_sections): New function.
1955 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
1956 "I386_FBSD_XSAVE_XCR0_OFFSET".
1957 Add "iterate_over_regset_sections" gdbarch method.
1958 Add "core_read_description" gdbarch method.
1959 * i386-tdep.c (i386_target_description): New function.
1960 * i386-tdep.h: Export i386_target_description and tdesc_i386.
1961 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
1962 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1963 x86 extended save area.
1964 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1965 * i386bsd-nat.h: Export i386bsd_xsave_len.
1966 * i386fbsd-nat.c (i386fbsd_read_description): New function.
1967 (_initialize_i386fbsd_nat): Set "to_read_description" to
1968 "i386fbsd_read_description".
1969 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
1970 (i386fbsd_core_read_description): New function.
1971 (i386fbsd_supply_xstateregset): New function.
1972 (i386fbsd_collect_xstateregset): New function.
1973 Add "i386fbsd_xstateregset".
1974 (i386fbsd_iterate_over_regset_sections): New function.
1975 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
1976 "I386_FBSD_XSAVE_XCR0_OFFSET".
1977 Add "iterate_over_regset_sections" gdbarch method.
1978 Add "core_read_description" gdbarch method.
1979 * i386fbsd-tdep.h: New file.
1981 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1983 * NEWS (Changes since GDB 7.9): Add removed -xdb.
1984 * breakpoint.c (command_line_is_silent): Remove xdb_commands
1986 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
1988 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
1990 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
1992 * defs.h (xdb_commands): Remove declaration.
1993 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
1994 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
1995 * infcmd.c (run_no_args_command, go_command): Remove.
1996 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
1997 * infrun.c (xdb_handle_command): Remove.
1998 (_initialize_infrun): Remove xdb_commands for lz and z.
1999 * main.c (xdb_commands): Remove variable.
2000 (captured_main): Remove "xdb" from long_options.
2001 (print_gdb_help): Remove --xdb from help.
2002 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
2003 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
2004 * stack.c (backtrace_full_command, args_plus_locals_info)
2005 (current_frame_command): Remove.
2006 (_initialize_stack): Remove xdb_commands for t, T and l.
2007 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
2008 * thread.c (_initialize_thread): Remove xdb_commands condition.
2009 * tui/tui-layout.c (tui_toggle_layout_command)
2010 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
2011 (_initialize_tui_layout): Remove xdb_commands for td and ts.
2012 * tui/tui-regs.c (tui_scroll_regs_forward_command)
2013 (tui_scroll_regs_backward_command): Remove.
2014 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
2015 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
2016 (_initialize_tui_win): Remove xdb_commands for U and w.
2017 * utils.c (pagination_on_command, pagination_off_command): Remove.
2018 (initialize_utils): Remove xdb_commands for am and sm.
2020 2015-04-10 Pedro Alves <palves@redhat.com>
2022 * infrun.c (displaced_step_fixup): Switch to the event ptid
2023 earlier. If the thread stopped for a watchpoint and the
2024 target/arch has non-continuable watchpoints, cancel the displaced
2026 (resume): Don't start a displaced step if in-line step-over info
2029 2015-04-10 Pedro Alves <palves@redhat.com>
2031 * infrun.c (displaced_step_in_progress): New function.
2032 (do_target_resume): Advise target to report all signals if
2035 2015-04-10 Pedro Alves <palves@redhat.com>
2038 * infrun.c (process_event_stop_test): Don't assume a step-resume
2039 is set if tp->stepped_breakpoint is true.
2041 2015-04-10 Yao Qi <yao.qi@linaro.org>
2043 * arm-tdep.c (install_alu_reg): Update comment.
2044 (thumb_copy_alu_reg): Remove local variable rn. Update
2045 debugging message. Use r2 instead of r1 in the modified
2048 2015-04-10 Pedro Alves <palves@redhat.com>
2051 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
2052 linux_displaced_step_location as gdbarch_displaced_step_location
2054 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
2055 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
2056 * linux-tdep.c (linux_displaced_step_location): New function,
2057 based on ppc_linux_displaced_step_location.
2058 * linux-tdep.h (linux_displaced_step_location): New declaration.
2059 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
2060 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
2062 (ppc_linux_init_abi): Install linux_displaced_step_location as
2063 gdbarch_displaced_step_location hook, even without Cell/B.E..
2064 (_initialize_ppc_linux_tdep): Don't install
2065 ppc_linux_inferior_created as inferior_created observer.
2066 * s390-linux-tdep.c (s390_gdbarch_init): Install
2067 linux_displaced_step_location as gdbarch_displaced_step_location
2070 2015-04-09 Gary Benson <gbenson@redhat.com>
2072 * common/common-remote-fileio.h: Rename to...
2073 * common/fileio.h: ...this. Update all references.
2074 (remote_fileio_to_fio_error): Rename to...
2075 (host_to_fileio_error): ...this.
2076 (remote_fileio_to_be): Rename to...
2077 (host_to_bigendian): ...this. Update all callers.
2078 (remote_fileio_to_fio_uint): Rename to...
2079 (host_to_fileio_uint): ...this. Update all callers.
2080 (remote_fileio_to_fio_time): Rename to...
2081 (host_to_fileio_time): ...this. Update all callers.
2082 (remote_fileio_to_fio_stat): Rename to...
2083 (host_to_fileio_stat): ...this.
2084 Update all references.
2085 * common/common-remote-fileio.c: Rename to...
2086 * common/fileio.c: ...this. Update all references.
2087 (remote_fileio_to_fio_error): Rename to...
2088 (host_to_fileio_error): ...this. Update all callers.
2089 (remote_fileio_mode_to_target): Rename to...
2090 (fileio_mode_pack): ...this. Update all callers.
2091 (remote_fileio_to_fio_mode): Rename to...
2092 (host_to_fileio_mode): ...this. Update all callers.
2093 (remote_fileio_to_fio_ulong): Rename to...
2094 (host_to_fileio_ulong): ...this. Update all callers.
2095 (remote_fileio_to_fio_stat): Rename to...
2096 (host_to_fileio_stat): ...this. Update all callers.
2098 2015-04-09 Andy Wingo <wingo@igalia.com>
2100 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
2101 (frame_functions): Bind gdbscm_frame_read_register to
2102 frame-read-register.
2103 * guile/lib/gdb.scm (frame-read-register): Export.
2105 2015-04-09 Gary Benson <gbenson@redhat.com>
2107 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
2109 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
2110 New function, factored out the named functions below.
2111 * inf-child.c (gdb/fileio.h): Remove include.
2112 (common-remote-fileio.h): New include.
2113 (inf_child_errno_to_fileio_error): Remove function. Update
2114 all callers to use remote_fileio_to_fio_error.
2115 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
2117 2015-04-09 Andy Wingo <wingo@igalia.com>
2119 * MAINTAINERS (Write After Approval): Add Andy Wingo.
2121 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
2123 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
2124 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
2125 * configure: Regenerated.
2127 2015-04-09 Pedro Alves <palves@redhat.com>
2129 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
2130 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
2131 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
2132 * gnulib/import/Makefile.am: Update.
2133 * gnulib/import/Makefile.in: Update.
2134 * gnulib/import/m4/gnulib-cache.m4: Update.
2135 * gnulib/import/m4/gnulib-comp.m4: Update.
2136 * gnulib/import/m4/strtok_r.m4: New file.
2137 * gnulib/import/strtok_r.c: New file.
2139 2015-04-09 Pedro Alves <palves@redhat.com>
2141 * gnulib/update-gnulib.sh (aclocal version check): Filter out
2142 "called too early to check prototype".
2144 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
2147 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
2148 use a caching mechanism. Adjust comments and code to reflect
2149 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
2150 (cmdpy_completer_handle_brkchars): Adjust call to
2151 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
2152 (cmdpy_completer): Likewise.
2154 2015-04-08 Yao Qi <yao.qi@linaro.org>
2156 * spu-tdep.c (spu_gdbarch_init): Don't call
2157 set_gdbarch_cannot_step_breakpoint.
2159 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
2161 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
2163 2015-04-07 Pedro Alves <palves@redhat.com>
2165 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
2166 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
2167 (delete_exited_threads): New declaration.
2168 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
2169 * linux-nat.c (linux_nat_update_thread_list): New function.
2170 (linux_nat_add_target): Install it.
2171 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
2172 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
2173 (delete_exited_threads): New function.
2175 2015-04-07 Pedro Alves <pedro@codesourcery.com>
2177 * infrun.c (resume) <displaced stepping debug output>: Get the
2178 leader thread's regcache, not resume_ptid's.
2180 2015-04-06 Doug Evans <xdje42@gmail.com>
2182 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
2184 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
2185 Include symbol domain in debugging output.
2187 2015-04-06 Pedro Alves <palves@redhat.com>
2188 Bernd Edlinger <bernd.edlinger@hotmail.de>
2190 * configure.ac: Remove the mingw32-specific stub-termcap.o
2191 fallback, and instead fallback to the stub termcap on all hosts.
2192 * configure: Regenerate.
2193 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
2196 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2198 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
2199 "top_level" parameter.
2200 (resolve_dynamic_type_internal): Remove the unused "top_level"
2201 parameter. Update call to is_dynamic_type_internal.
2202 (is_dynamic_type): Update call to is_dynamic_type_internal.
2203 (resolve_dynamic_range): Update call to
2204 resolve_dynamic_type_internal.
2205 (resolve_dynamic_union): Likewise.
2206 (resolve_dynamic_struct): Likewise.
2207 (resolve_dynamic_type): Likewise.
2209 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2211 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
2212 TYPE_CODE_REF types so that they are not considered as dynamic
2213 depending on the referenced type.
2214 (resolve_dynamic_type_internal): Likewise.
2216 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
2218 * Makefile.in (top_srcdir): New.
2219 * configure: Regenerated.
2221 2015-04-02 Gary Benson <gbenson@redhat.com>
2223 * NEWS: Announce the new default sysroot of "target:".
2225 2015-04-02 Gary Benson <gbenson@redhat.com>
2227 * main.c (captured_main): Set gdb_sysroot to "target:"
2228 if not otherwise set.
2230 2015-04-02 Gary Benson <gbenson@redhat.com>
2232 * exec.c (exec_file_attach): Support "target:" filenames.
2234 2015-04-02 Gary Benson <gbenson@redhat.com>
2236 * solib.c (solib_find): Strip "target:" prefix from sysroot
2237 if accessing local files.
2239 2015-04-02 Gary Benson <gbenson@redhat.com>
2241 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
2242 checks and error messages.
2244 2015-04-02 Gary Benson <gbenson@redhat.com>
2246 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
2247 (remote_filename_p): Remove declaration.
2248 (remote_bfd_open): Likewise.
2249 * remote.c (remote_bfd_iovec_open): Remove function.
2250 (remote_bfd_iovec_close): Likewise.
2251 (remote_bfd_iovec_pread): Likewise.
2252 (remote_bfd_iovec_stat): Likewise.
2253 (remote_filename_p): Likewise.
2254 (remote_bfd_open): Likewise.
2255 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
2256 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
2257 (gdb_bfd_open_maybe_remote): Remove function.
2258 (symfile_bfd_open): Replace remote filename check with
2259 target filename check.
2260 (reread_symbols): Use gdb_bfd_open.
2261 * build-id.c (gdbcore.h): New include.
2262 (build_id_to_debug_bfd): Use gdb_bfd_open.
2263 * infcmd.c (attach_command_post_wait): Remove remote filename
2265 * solib.c (solib_find): Replace remote-specific handling with
2266 target-specific handling. Update comments where necessary.
2267 (solib_bfd_open): Replace remote-specific handling with
2268 target-specific handling.
2269 (gdb_sysroot_changed): New function.
2270 (_initialize_solib): Call the above when gdb_sysroot changes.
2271 * windows-tdep.c (gdbcore.h): New include.
2272 (windows_xfer_shared_library): Use gdb_bfd_open.
2274 2015-04-02 Gary Benson <gbenson@redhat.com>
2276 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
2277 (is_target_filename): New declaration.
2278 (gdb_bfd_has_target_filename): Likewise.
2279 (gdb_bfd_open): Update documentation comment.
2280 * gdb_bfd.c (target.h): New include.
2281 (gdb/fileio.h): Likewise.
2282 (is_target_filename): New function.
2283 (gdb_bfd_has_target_filename): Likewise.
2284 (fileio_errno_to_host): Likewise.
2285 (gdb_bfd_iovec_fileio_open): Likewise.
2286 (gdb_bfd_iovec_fileio_pread): Likewise.
2287 (gdb_bfd_iovec_fileio_close): Likewise.
2288 (gdb_bfd_iovec_fileio_fstat): Likewise.
2289 (gdb_bfd_open): Use target fileio to access paths prefixed
2290 with "target:" where necessary.
2292 2015-04-02 Gary Benson <gbenson@redhat.com>
2294 * target.h (struct target_ops) <to_filesystem_is_local>:
2296 (target_filesystem_is_local): New macro.
2297 * target-delegates.c: Regenerate.
2298 * remote.c (remote_filesystem_is_local): New function.
2299 (init_remote_ops): Initialize to_filesystem_is_local.
2301 2015-04-02 Gary Benson <gbenson@redhat.com>
2303 * target.h (struct target_ops) <to_fileio_fstat>: New field.
2304 (target_fileio_fstat): New declaration.
2305 * target.c (target_fileio_fstat): New function.
2306 * inf-child.c (inf_child_fileio_fstat): Likewise.
2307 (inf_child_target): Initialize to_fileio_fstat.
2308 * remote.c (init_remote_ops): Likewise.
2310 2015-04-01 Sasha Smundak <asmundak@google.com>
2312 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
2313 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
2314 (py-unwind.o): New recipe.
2315 * NEWS: mention Python frame unwinding.
2316 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
2317 gdb/unwinder.py and gdb/command/unwinder.py
2318 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
2320 (execute_unwinders): New function.
2321 * python/lib/gdb/command/unwinders.py: New file.
2322 * python/lib/gdb/unwinder.py: New file.
2323 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
2324 (objfpy_dealloc): Decrement frame_unwinders reference count.
2325 (objfpy_initialize): Create frame_unwinders list.
2326 (objfpy_get_frame_unwinders): New function.
2327 (objfpy_set_frame_unwinders): Ditto.
2328 (objfile_getset): Add frame_unwinders attribute to Objfile.
2329 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
2330 (pspy_dealloc): Decrement frame_unwinders reference count.
2331 (pspy_initialize): Create frame_unwinders list.
2332 (pspy_get_frame_unwinders): New function.
2333 (pspy_set_frame_unwinders): Ditto.
2334 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
2335 * python/py-unwind.c: New file.
2336 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
2337 (objpy_get_frame_unwinders): New prototype.
2338 (gdbpy_initialize_unwind): New prototype.
2339 * python/python.c (gdbpy_apply_type_printers): Call
2340 gdbpy_initialize_unwind.
2342 2015-04-01 Pedro Alves <palves@redhat.com>
2344 * infrun.c (resume): Check currently_stepping after clearing
2345 stepped_breakpoint, not before.
2347 2015-04-01 Pedro Alves <palves@redhat.com>
2349 * infrun.c (print_target_wait_results): Print all the ptid
2352 2015-04-01 Pedro Alves <palves@redhat.com>
2354 * infrun.c (keep_going): Also discard cleanups if inserting
2357 2015-04-01 Pedro Alves <palves@redhat.com>
2359 * infrun.c (wait_for_inferior): Install the
2360 finish_thread_state_cleanup cleanup across the whole function, not
2361 just around handle_inferior_event.
2363 2015-04-01 Pedro Alves <palves@redhat.com>
2365 * infrun.c (resume) <step past permanent breakpoint>: Use
2368 2015-04-01 Pedro Alves <palves@redhat.com>
2370 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
2372 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
2374 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
2376 2015-04-01 Pedro Alves <palves@redhat.com>
2378 * linux-thread-db.c (record_thread): Readd the thread to gdb's
2379 list if it was marked exited.
2381 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
2383 * configure: Regenerated.
2385 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
2386 Jan Kratochvil <jan.kratochvil@redhat.com>
2387 Oleg Nesterov <oleg@redhat.com>
2390 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
2391 New enum identifying the various options of the coredump_filter
2393 (struct smaps_vmflags): New struct.
2394 (use_coredump_filter): New variable.
2395 (decode_vmflags): New function.
2396 (mapping_is_anonymous_p): Likewise.
2397 (dump_mapping_p): Likewise.
2398 (linux_find_memory_regions_full): New variables
2399 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
2400 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
2401 parsing of its information. Implement memory mapping filtering
2402 based on its contents.
2403 (show_use_coredump_filter): New function.
2404 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
2405 * NEWS: Mention the possibility of using the
2406 '/proc/PID/coredump_filter' file when generating a corefile.
2407 Mention new command 'set use-coredump-filter'.
2409 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
2411 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
2412 read_memory_unsigned_integer.
2414 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
2416 * Makefile.in (ZLIB): New.
2417 (ZLIBINC): Likewise.
2418 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
2419 (CLIBS): Add $(ZLIB).
2420 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
2422 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
2423 * top.c (print_gdb_configuration): Remove --with-zlib and
2425 * config.in: Regenerated.
2426 * configure: Likewise.
2428 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
2430 * NEWS: Mention info os cpus support.
2431 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
2432 (struct osdata_type): Add cpus entry, reorder the entries in
2435 2015-03-31 Matthias Klose <doko@ubuntu.com>
2437 * compile/compile.c (compile_to_object): Allow triplets with or
2440 2015-03-30 Doug Evans <dje@google.com>
2443 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
2444 klass in VAR_DOMAIN.
2446 2015-03-30 Gary Benson <gbenson@redhat.com>
2448 * remote.c (remote_mourn_1): Remove function. Update all callers
2449 to use remote_mourn.
2450 (extended_remote_mourn_1): Remove function. Update all callers
2451 to use extended_remote_mourn.
2452 (extended_remote_attach_1): Remove function. Update all callers
2453 to use extended_remote_attach.
2455 2015-03-28 James Bowman <james.bowman@ftdichip.com>
2457 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
2458 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
2459 (ALLDEPFILES): Add ft32-tdep.c.
2460 * configure.tgt: Add FT32 entry.
2461 * ft32-tdep.c: New file, FT32 target-dependent code.
2462 * ft32-tdep.h: New file, FT32 target-dependent code.
2464 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
2467 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2469 * printcmd.c (print_command_1): Move expr variable scope.
2471 2015-03-27 Joel Brobecker <brobecker@adacore.com>
2473 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
2475 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
2477 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
2480 2015-03-26 Joel Brobecker <brobecker@adacore.com>
2482 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
2483 exception raised while parsing the probe arguments.
2484 Force parsing to be done using the C language parser.
2485 * expression.h (parse_expression_with_language): Declare.
2486 * parse.c (parse_expression_with_language): New function.
2488 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
2490 * MAINTAINERS (Write After Approval): Add "Jon Turney".
2492 2015-03-26 Andy Wingo <wingo@igalia.com>
2495 * dwarf2read.c (struct partial_die_info): Add has_const_value
2497 (add_partial_symbol): Don't punt on symbols that have const_value
2499 (read_partial_die): Detect DW_AT_const_value.
2501 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2504 * printcmd.c (print_command_1): Move expr variable scope.
2506 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2509 * printcmd.c (validate_format): Make the parameter cmdname const.
2511 2015-03-26 Don Breazeal <donb@codesourcery.com>
2513 * remote.c (_initialize_remote): Update comment.
2515 2015-03-26 Pedro Alves <palves@redhat.com>
2516 Jon TURNEY <jon.turney@dronecode.org.uk>
2518 * coffread.c (coff_symfile_read): When constructing the name of an
2519 import stub symbol from import symbol for amd64, only skip the
2520 char after _imp_ if the target is underscored (like i386) and the
2521 char is indeed the target's leading char.
2523 2015-03-25 Pedro Alves <palves@redhat.com>
2525 * target.h <to_async>: Replace 'callback' and 'context' parameters
2526 with boolean 'enable' parameter.
2527 (target_async): Replace CALLBACK and CONTEXT parameters with
2528 boolean ENABLE parameter.
2529 * inf-loop.c (inferior_event_handler): Adjust.
2530 * linux-nat.c (linux_nat_attach, linux_nat_resume)
2531 (linux_nat_resume): Adjust.
2532 (async_client_callback, async_client_context): Delete.
2533 (handle_target_event): Call inferior_event_handler directly.
2534 (linux_nat_async): Replace 'callback' and 'context' parameters
2535 with boolean 'enable' parameter. Adjust. Remove references to
2536 async_client_callback and async_client_context.
2537 (linux_nat_close): Adjust.
2538 * record-btrace.c (record_btrace_async): Replace 'callback' and
2539 'context' parameters with boolean 'enable' parameter. Adjust.
2540 (record_btrace_resume): Adjust.
2541 * record-full.c (record_full_async): Replace 'callback' and
2542 'context' parameters with boolean 'enable' parameter. Adjust.
2543 (record_full_resume, record_full_core_resume): Adjust.
2544 * remote.c (struct remote_state) <async_client_callback,
2545 async_client_context>: Delete fields.
2546 (remote_start_remote, extended_remote_attach_1, remote_resume)
2547 (extended_remote_create_inferior): Adjust.
2548 (remote_async_serial_handler): Call inferior_event_handler
2550 (remote_async): Replace 'callback' and 'context' parameters with
2551 boolean 'enable' parameter. Adjust.
2552 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
2554 * target-delegates.c: Regenerate.
2556 2015-03-25 Gary Benson <gbenson@redhat.com>
2557 Pedro Alves <palves@redhat.com>
2559 * target.c (fileio_ft_t): New typedef, define object vector.
2560 (fileio_fhandles): New static variable.
2561 (is_closed_fileio_fh): New macro.
2562 (lowest_closed_fd): New static variable.
2563 (acquire_fileio_fd): New function.
2564 (release_fileio_fd): Likewise.
2565 (fileio_fd_to_fh): New macro.
2566 (target_fileio_open): Wrap the file descriptor on success.
2567 (target_fileio_pwrite): Updated to use wrapped file descriptor.
2568 (target_fileio_pread): Likewise.
2569 (target_fileio_close): Likewise.
2571 2015-03-24 Pedro Alves <palves@redhat.com>
2573 * thread.c (thread_apply_all_command): Take exited threads into
2576 2015-03-24 Pedro Alves <palves@redhat.com>
2578 * infrun.c (resume, proceed): Mention
2579 switch_back_to_stepped_thread, not switch_back_to_stepping.
2581 2015-03-24 Pedro Alves <palves@redhat.com>
2583 * infrun.c (user_visible_resume_ptid): Rewrite going from
2584 most-locked to unlocked instead of the opposite. Move comment ...
2585 * infrun.h (user_visible_resume_ptid): ... here.
2587 2015-03-24 Pedro Alves <palves@redhat.com>
2589 * linux-nat.c (linux_nat_resume): Output debug logs before trying
2590 to resume the event lwp. Use the lwp's ptid instead of the passed
2591 in (maybe wildcard) ptid.
2592 (stop_wait_callback): Tweak debug log output.
2593 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
2595 (linux_nat_filter_event): In debug output, distinguish a
2596 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
2597 before trying to resume the lwp.
2599 2015-03-24 Joel Brobecker <brobecker@adacore.com>
2601 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
2602 pointer indirection.
2603 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
2604 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
2606 2015-03-24 Joel Brobecker <brobecker@adacore.com>
2608 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
2609 Renames DYN_ATTR_DATA_LOCATION.
2610 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
2611 DYN_ATTR_DATA_LOCATION.
2612 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
2613 instead of DYN_ATTR_DATA_LOCATION.
2615 2015-03-24 Pedro Alves <palves@redhat.com>
2617 * breakpoint.c (until_break_command): Adjust call to proceed.
2618 * gdbthread.h (struct thread_control_state) <stepping_command>:
2620 * infcall.c (run_inferior_call): Adjust call to proceed.
2621 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
2622 Adjust calls to proceed.
2623 (set_step_frame): Set the current thread's step_start_function
2625 (step_once): Adjust calls to proceed.
2626 (jump_command, signal_command, until_next_command)
2627 (finish_backward, finish_forward, proceed_after_attach_callback)
2628 (attach_command_post_wait): Adjust calls to proceed.
2629 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
2630 (do_target_resume): New function, factored out from ...
2631 (resume): ... here. Remove 'step' parameter. Instead, check
2632 currently_stepping to determine whether the thread should be
2634 (proceed): Remove 'step' parameter and don't set the thread's
2635 step_start_function here. Adjust call to 'resume'.
2636 (handle_inferior_event): Adjust calls to 'resume'.
2637 (switch_back_to_stepped_thread): Use do_target_resume instead of
2639 (keep_going): Adjust calls to 'resume'.
2640 * infrun.h (proceed): Remove 'step' parameter.
2642 * windows-nat.c (do_initial_windows_stuff): Adjust call to
2644 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
2646 2015-03-24 Pedro Alves <palves@redhat.com>
2648 * gdbthread.h (struct thread_control_state) <stepping_command>:
2650 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
2651 the thread's stepping_command field.
2652 * infrun.c (resume): Check the thread's stepping_command flag to
2653 determine which threads should be resumed. Rename 'entry_step'
2655 (clear_proceed_status_thread): Clear 'stepping_command'.
2656 (schedlock_applies): Change parameter type to struct thread_info
2658 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
2659 (switch_back_to_stepped_thread): Adjust calls to
2660 'schedlock_applies'.
2661 (_initialize_infrun): Adjust "set scheduler-locking step" help.
2663 2015-03-24 Pedro Alves <palves@redhat.com>
2665 * infrun.c (step_start_function): Delete and ...
2666 * gdbthread.h (struct thread_control_state) <step_start_function>:
2667 ... now a field here.
2668 * infrun.c (clear_proceed_status_thread): Clear the thread's
2669 step_start_function.
2670 (proceed, process_event_stop_test, print_stop_event): Adjust.
2672 2015-03-24 Pedro Alves <palves@redhat.com>
2674 * infrun.c (proceed): No longer handle negative step.
2676 2015-03-24 Gary Benson <gbenson@redhat.com>
2678 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
2679 (x86_linux_prepare_to_resume): Likewise.
2680 * x86-linux-nat.c (x86_linux_new_thread):
2681 Moved to nat/x86-linux.c.
2682 (x86_linux_prepare_to_resume): Likewise.
2683 * nat/x86-linux.c (x86_linux_new_thread): New function.
2684 (x86_linux_prepare_to_resume): Likewise.
2686 2015-03-24 Gary Benson <gbenson@redhat.com>
2688 * nat/x86-linux-dregs.h: New file.
2689 * nat/x86-linux-dregs.c: Likewise.
2690 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
2691 (x86-linux-dregs.o): New rule.
2692 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
2693 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2694 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
2695 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
2696 (x86_linux_dr_get): Likewise.
2697 (x86_linux_dr_set): Likewise.
2698 (x86_linux_dr_get_addr): Likewise.
2699 (x86_linux_dr_get_control): Likewise.
2700 (x86_linux_dr_get_status): Likewise.
2701 (update_debug_registers_callback): Likewise.
2702 (x86_linux_dr_set_control): Likewise.
2703 (x86_linux_dr_set_addr): Likewise.
2704 (x86_linux_update_debug_registers): Likewise.
2706 2015-03-24 Gary Benson <gbenson@redhat.com>
2708 * x86-linux-nat.c (x86_linux_update_debug_registers):
2709 New function, factored out from...
2710 (x86_linux_prepare_to_resume): ...this.
2712 2015-03-24 Gary Benson <gbenson@redhat.com>
2714 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
2715 (x86_linux_dr_set): Likewise.
2716 (x86_linux_dr_get_addr): Likewise.
2717 (x86_linux_dr_get_control): Likewise.
2718 (x86_linux_dr_get_status): Likewise.
2719 (update_debug_registers_callback): Likewise.
2720 (x86_linux_dr_set_control): Likewise.
2721 (x86_linux_dr_set_addr): Likewise.
2722 (x86_linux_prepare_to_resume): Likewise.
2723 (x86_linux_new_thread): Likewise.
2725 2015-03-24 Gary Benson <gbenson@redhat.com>
2727 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
2728 (x86_linux_new_thread): Rename argument.
2730 2015-03-24 Gary Benson <gbenson@redhat.com>
2732 * nat/x86-linux.h: New file.
2733 * nat/x86-linux.c: Likewise.
2734 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
2735 (x86-linux.o): New rule.
2736 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
2737 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2738 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
2739 (lwp_set_arch_private_info): New declaration.
2740 (lwp_arch_private_info): Likewise.
2741 * linux-nat.c (lwp_set_arch_private_info): New function.
2742 (lwp_arch_private_info): Likewise.
2743 * x86-linux-nat.c: Include nat/x86-linux.h.
2744 (arch_lwp_info): Removed structure.
2745 (update_debug_registers_callback):
2746 Use lwp_set_debug_registers_changed.
2747 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
2748 and lwp_set_debug_registers_changed.
2749 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2751 2015-03-24 Gary Benson <gbenson@redhat.com>
2753 * nat/linux-nat.h (ptid_of_lwp): New declaration.
2754 (lwp_is_stopped): Likewise.
2755 (lwp_stop_reason): Likewise.
2756 * linux-nat.c (ptid_of_lwp): New function.
2757 (lwp_is_stopped): Likewise.
2758 (lwp_is_stopped_by_watchpoint): Likewise.
2759 * x86-linux-nat.c (update_debug_registers_callback):
2761 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
2764 2015-03-24 Gary Benson <gbenson@redhat.com>
2766 * linux-nat.h (linux_stop_lwp): Move declaration to...
2767 * nat/linux-nat.h (linux_stop_lwp): New declaration.
2769 2015-03-24 Gary Benson <gbenson@redhat.com>
2771 * linux-nat.h: Include nat/linux-nat.h.
2772 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
2773 * nat/linux-nat.h (struct lwp_info): New forward declaration.
2774 (iterate_over_lwps_ftype): New typedef.
2775 (iterate_over_lwps): New declaration.
2776 * linux-nat.h (iterate_over_lwps): Update comment. Use
2777 iterate_over_lwps_ftype. Update callback return value check.
2779 2015-03-24 Gary Benson <gbenson@redhat.com>
2781 * x86-nat.h (x86_debug_reg_state): Move declaration to...
2782 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
2784 2015-03-24 Gary Benson <gbenson@redhat.com>
2786 * nat/linux-nat.h (current_lwp_ptid): New declaration.
2787 * linux-nat.c (current_lwp_ptid): New function.
2788 * x86-linux-nat.c: Include nat/linux-nat.h.
2789 (x86_linux_dr_get_addr): Use current_lwp_ptid.
2790 (x86_linux_dr_get_control): Likewise.
2791 (x86_linux_dr_get_status): Likewise.
2792 (x86_linux_dr_set_control): Likewise.
2793 (x86_linux_dr_set_addr): Likewise.
2795 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
2797 PR breakpoints/16466
2798 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
2800 2015-03-23 Joel Brobecker <brobecker@adacore.com>
2802 * ser-mingw.c (ser_windows_setparity): Fix indentation.
2803 * ser-unix.c (hardwire_setparity): Likewise.
2805 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
2807 * NEWS: Mention set/show serial parity command.
2808 * monitor.c (monitor_open): Call serial_setparity.
2809 * remote.c (remote_open_1): Likewise.
2810 * ser-base.c (ser_base_serparity): New function.
2811 * ser-base.h (ser_base_setparity): Add declaration.
2812 * ser-go32.c (dos_ops): Set "setparity" field.
2813 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
2815 (ser_windows_setparity): New function.
2816 (hardwire_ops): Add ser_windows_setparity.
2817 (tty_ops): Add NULL for setparity field.
2818 (pipe_ops): Add ser_base_setparity.
2819 (tcp_ops): Likewise.
2820 * ser-pipe.c (pipe_ops): Likewise.
2821 * ser-tcp.c (tcp_ops): Likewise.
2822 * ser-unix.c (hardwire_setparity): Add declaration.
2823 (hardwire_raw): Don't reset PARENB flag.
2824 (hardwire_setparity): New function.
2825 (hardwire_ops): Add hardwire_setparity.
2826 * serial.c (serial_setparity): New function.
2827 (serial_parity): New global.
2828 (parity_none, parity_odd, parity_even, parity_enums, parity):
2830 (set_parity): New function.
2831 (_initialize_serial): Add set/show serial parity commands.
2832 * serial.h (GDBPARITY_NONE): Define.
2833 (GDBPARITY_ODD): Define.
2834 (GDBPARITY_EVEN): Define.
2835 (serial_setparity) Add declaration.
2836 (struct serial_ops): Add setparity field.
2837 * target.h (serial_parity): Add declaration.
2839 2015-03-23 Keith Seitz <keiths@redhat.com>
2841 * linespec.c (linespec_lexer_lex_keyword): Update comment.
2843 2015-03-23 Keith Seitz <keiths@redhat.com>
2845 * breakpoint.c (parse_breakpoint_sals): Use
2846 linespec_lexer_lex_keyword to ascertain if the user specified
2848 * linespec.c [IF_KEYWORD_INDEX]: Define.
2849 (linespec_lexer_lex_keyword): Export.
2850 (struct ls_parser) <keyword_ok>: Remove.
2851 A keyword is only a keyword if not followed by another keyword.
2852 (linespec_lexer_lex_one): Remove keyword_ok handling.
2853 Add comment explaining why the parsing stream is not advanced
2854 when a keyword is seen.
2855 (parse_linespec): Remove parser->keyword_ok.
2856 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
2858 2015-03-23 Keith Seitz <keiths@redhat.com>
2861 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
2862 if we find a static method with DW_AT_vtable_elem_location.
2864 2015-03-21 Eli Zaretskii <eliz@gnu.org>
2866 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
2867 before the second loop, to avoid undefined behavior. Reported by
2868 Anton Blanchard <anton@samba.org>.
2870 2015-03-20 Keven Boell <keven.boell@intel.com>
2872 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
2873 data_location usage to linked list.
2874 (resolve_dynamic_type_internal): Adapt data_location to
2876 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
2877 (copy_type_recursive, copy_type): Add copy of linked list.
2878 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
2879 (struct dynamic_prop_list): New struct.
2880 * dwarf2read.c (set_die_type): Set data_location data.
2882 2015-03-20 Pedro Alves <palves@redhat.com>
2884 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
2885 inner block and make it const.
2886 * machoread.c (get_archive_prefix_len): Make "lparen" const.
2888 2015-03-20 Pedro Alves <palves@redhat.com>
2890 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
2891 * breakpoint.h (set_breakpoint_condition): Update declaration.
2893 2015-03-20 Pedro Alves <palves@redhat.com>
2895 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
2897 2015-03-20 Pedro Alves <palves@redhat.com>
2899 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
2901 2015-03-20 Pedro Alves <palves@redhat.com>
2903 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
2905 2015-03-20 Pedro Alves <palves@redhat.com>
2907 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
2908 (nto_init_solib_absolute_prefix): Likewise.
2910 2015-03-20 Pedro Alves <palves@redhat.com>
2912 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
2913 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
2915 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
2917 * config/djgpp/README: Remove gdb.hp.
2919 2015-03-20 Yao Qi <yao.qi@linaro.org>
2921 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
2922 set_gdbarch_cannot_step_breakpoint.
2924 2015-03-19 Pedro Alves <palves@redhat.com>
2926 * linux-nat.c (linux_resume_one_lwp): Rename to ...
2927 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
2928 instead call perror_with_name.
2929 (check_ptrace_stopped_lwp_gone): New function.
2930 (linux_resume_one_lwp): Reimplement as wrapper around
2931 linux_resume_one_lwp_throw that swallows errors if the LWP is
2933 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
2934 swallows errors if the LWP is gone. Use
2935 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
2937 2015-03-19 Pedro Alves <palves@redhat.com>
2939 * linux-nat.c (status_callback): Return early if the LWP has no
2942 2015-03-19 Pedro Alves <palves@redhat.com>
2944 * linux-nat.c (select_event_lwp_callback): Update comment to no
2945 longer mention SIGTRAP.
2947 2015-03-18 Tristan Gingold <gingold@adacore.com>
2949 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
2950 redirection code to ...
2951 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
2952 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
2954 2015-03-18 Gary Benson <gbenson@redhat.com>
2956 (remote_protocol_features): Remove the "vFile:fstat" feature.
2957 (remote_hostio_fstat): Probe for "vFile:fstat" support.
2959 2015-03-11 Yao Qi <yao.qi@linaro.org>
2962 * aarch64-linux-tdep.c: Include xml-syscall.h
2963 (aarch64_linux_get_syscall_number): New function.
2964 (aarch64_linux_init_abi): Call
2965 set_gdbarch_get_syscall_number.
2966 * syscalls/aarch64-linux.xml: New file.
2968 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
2970 * ser-base.h (ser_base_setstopbits): Change second argument name
2971 from "rate" to "num".
2973 2015-03-17 Gary Benson <gbenson@redhat.com>
2974 Luke Allardyce <lukeallardyce@gmail.com>
2977 * common/common-remote-fileio.h (sys/stat.h): New include.
2978 (stuct stat): Remove forward declaration.
2980 2015-03-16 John Baldwin <jhb@FreeBSD.org>
2982 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
2983 before writing core register notes.
2985 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
2986 Pedro Alves <palves@redhat.com>
2988 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
2989 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
2990 (tgoto): Wrap with extern "C".
2992 2015-03-16 Pedro Alves <palves@redhat.com>
2993 Yuanhui Zhang <asmwarrior@gmail.com>
2995 * stub-termcap.c (tputs): Change prototype.
2997 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
2998 Pedro Alves <palves@redhat.com>
3000 * windows-nat.c (struct thread_info_struct): Rename to ...
3001 (struct windows_thread_info_struct): ... this.
3002 (thread_info): Rename to ...
3003 (windows_thread_info): ... this.
3006 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
3007 Pedro Alves <palves@redhat.com>
3009 * NEWS: New Removed targets and native configurations.
3011 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3014 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
3015 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
3016 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
3017 ia64-hpux-tdep.h, solib-ia64-hpux.h.
3018 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
3019 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
3020 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
3022 * config/ia64/hpux.mh: Remove file.
3023 * config/pa/hpux.mh: Remove file.
3024 * configure: Rebuilt.
3025 * configure.ac (dlgetmodinfo, somread.o): Remove.
3026 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3027 (ia64-*-hpux*): Remove its float format exception.
3028 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3029 * hppa-hpux-nat.c: Remove file.
3030 * hppa-hpux-tdep.c: Remove file.
3031 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
3032 Move them here from hppa-tdep.h
3033 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
3034 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
3035 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
3036 Move them to hppa-tdep.c.
3037 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
3039 * ia64-hpux-nat.c: Remove file.
3040 * ia64-hpux-tdep.c: Remove file.
3041 * ia64-hpux-tdep.h: Remove file.
3042 * inf-ttrace.c: Remove file.
3043 * inf-ttrace.h: Remove file.
3044 * solib-ia64-hpux.c: Remove file.
3045 * solib-ia64-hpux.h: Remove file.
3046 * solib-pa64.c: Remove file.
3047 * solib-pa64.h: Remove file.
3048 * solib-som.c: Remove file.
3049 * solib-som.h: Remove file.
3050 * somread.c: Remove file.
3052 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3054 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
3055 * config.in: Regenerate.
3056 * configure: Regenerate.
3057 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
3059 (fbsd_find_memory_regions): Use kinfo_getvmmap to
3060 enumerate memory regions if present.
3062 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3064 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
3065 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
3067 (i386fbsd_sigtramp_p): Likewise.
3069 2015-03-12 John Baldwin <jhb@FreeBSD.org>
3071 * MAINTAINERS (Write After Approval): Add John Baldwin.
3073 2015-03-12 Gary Benson <gbenson@redhat.com>
3075 * solib.c (_initialize_solib): Make "set/show sysroot" use
3076 add_setshow_optional_filename_cmd so it can be restored to
3077 empty after being set.
3079 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3081 * Makefile.in (SFILES): New source break-catch-syscall.c.
3082 (COMMON_OBS): New object break-catch-syscall.o.
3083 * break-catch-syscall.c: New file.
3084 * breakpoint.c: Remove inclusion of "xml-syscall.h".
3085 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
3086 (struct syscall_catchpoint): Likewise.
3087 (dtor_catch_syscall): Likewise.
3088 (catch_syscall_inferior_data): Likewise.
3089 (struct catch_syscall_inferior_data): Likewise.
3090 (get_catch_syscall_inferior_data): Likewise.
3091 (catch_syscall_inferior_data_cleanup): Likewise.
3092 (insert_catch_syscall): Likewise.
3093 (remove_catch_syscall): Likewise.
3094 (breakpoint_hit_catch_syscall): Likewise.
3095 (print_it_catch_syscall): Likewise.
3096 (print_one_catch_syscall): Likewise.
3097 (print_mention_catch_syscall): Likewise.
3098 (print_recreate_catch_syscall): Likewise.
3099 (catch_syscall_breakpoint_ops): Likewise.
3100 (syscall_catchpoint_p): Likewise.
3101 (create_syscall_event_catchpoint): Likewise.
3102 (catch_syscall_split_args): Likewise.
3103 (catch_syscall_command_1): Likewise.
3104 (is_syscall_catchpoint_enabled): Likewise.
3105 (catch_syscall_enabled): Likewise.
3106 (catching_syscall_number): Likewise.
3107 (catch_syscall_completer): Likewise.
3108 (clear_syscall_counts): Likewise.
3109 (initialize_breakpoint_ops): Move initialization of syscall
3110 catchpoints to break-catch-syscall.c.
3111 (_initialize_breakpoint): Move code related to syscall catchpoints
3112 to break-catch-syscall.c.
3114 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3116 * breakpoint.c (breakpoint_find_if): New function.
3117 * breakpoint.h (breakpoint_find_if): New prototype.
3119 2015-03-11 Gary Benson <gbenson@redhat.com>
3121 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
3122 * remote-fileio.c (remote_fileio_to_host_uint): New function.
3123 (remote_fileio_to_host_ulong): Likewise.
3124 (remote_fileio_to_host_mode): Likewise.
3125 (remote_fileio_to_host_time): Likewise.
3126 (remote_fileio_to_host_stat): Likewise.
3127 * remote.c (PACKET_vFile_fstat): New enum value.
3128 (remote_protocol_features): Register the "vFile:fstat" feature.
3129 (remote_hostio_fstat): New function.
3130 (remote_bfd_iovec_stat): Use the above.
3131 (_initialize_remote): Register new "set/show remote
3132 hostio-fstat-packet" command.
3133 * symfile.c (separate_debug_file_exists): Update comment.
3134 * NEWS: Announce new vFile:fstat packet.
3136 2015-03-11 Gary Benson <gbenson@redhat.com>
3138 * common/common-remote-fileio.h: New file.
3139 * common/common-remote-fileio.c: Likewise.
3140 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
3141 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
3142 (COMMON_OBS): Add common-remote-fileio.o.
3143 (common-remote-fileio.o): New rule.
3144 * remote-fileio.h (common-remote-fileio.h): New include.
3145 * remote-fileio.c (gdb/fileio.h): Do not include.
3146 (remote_fileio_to_be): Moved to common-remote-fileio.h.
3147 (remote_fileio_to_fio_uint): Likewise.
3148 (remote_fileio_to_fio_time): Likewise.
3149 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
3150 (remote_fileio_to_fio_mode): Likewise.
3151 (remote_fileio_to_fio_ulong): Likewise.
3152 (remote_fileio_to_fio_stat): Likewise.
3154 2015-03-11 Andy Wingo <wingo@igalia.com>
3156 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
3157 we were checking the cached type, not the cached dynamic type.
3159 2015-03-11 Andy Wingo <wingo@igalia.com>
3161 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
3162 other strings, as these are on the GC'd heap, and will be
3163 collected along with the smob.
3165 2015-03-11 Andy Wingo <wingo@igalia.com>
3167 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
3168 (objfile_functions): Bind gdbscm_objfile_progspace to
3170 * guile/lib/gdb.scm: Add objfile-progspace to exports.
3172 2015-03-11 Andy Wingo <wingo@igalia.com>
3174 * guile/guile.c (_initialize_guile): Disable automatic
3175 finalization, if Guile offers us that possibility.
3176 * guile/guile.c (call_initialize_gdb_module):
3177 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
3178 finalizers in appropriate places.
3179 * configure.ac (AC_TRY_LIBGUILE): Add a check for
3180 scm_set_automatic_finalization_enabled.
3181 * configure: Regenerated.
3183 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3185 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
3188 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3190 * s390-linux-nat.c (struct arch_lwp_info): New.
3191 (s390_fix_watch_points): Rename to...
3192 (s390_prepare_to_resume): ...this. Skip the PER info update
3193 unless the watch points have changed.
3194 (s390_refresh_per_info, s390_new_thread): New functions.
3195 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
3196 s390_fix_watch_points.
3197 (s390_remove_watchpoint): Likewise.
3198 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
3199 Register s390_prepare_to_resume.
3201 2015-03-09 Pedro Alves <palves@redhat.com>
3204 2015-03-07 Pedro Alves <palves@redhat.com>
3205 * common/gdb_socket.h: New file.
3206 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3208 (net_open): Use union gdb_sockaddr_u.
3210 2015-03-07 Pedro Alves <palves@redhat.com>
3212 * configure.ac (build_warnings): Move -Wmissing-prototypes
3213 -Wdeclaration-after-statement -Wmissing-parameter-type
3214 -Wold-style-declaration -Wold-style-definition to the C-specific
3216 * configure: Regenerate.
3218 2015-03-07 Pedro Alves <palves@redhat.com>
3220 * common/gdb_socket.h: New file.
3221 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3223 (net_open): Use union gdb_sockaddr_u.
3225 2015-03-07 Pedro Alves <palves@redhat.com>
3227 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
3228 (exceptions_state_mc_action_iter)
3229 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3231 [__cplusplus] (try_scope_depth): New global.
3232 [__cplusplus] (exception_try_scope_entry)
3233 (exception_try_scope_exit, gdb_exception_sliced_copy)
3234 (exception_rethrow): New functions.
3235 (throw_exception): In C++ mode, throw
3236 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
3237 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
3238 (throw_it): In C++ mode, use try_scope_depth.
3239 * common/common-exceptions.h [!__cplusplus]
3240 (exceptions_state_mc_action_iter)
3241 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3243 [__cplusplus] (exception_try_scope_entry)
3244 (exception_try_scope_exit, exception_rethrow): Declare.
3245 [__cplusplus] (struct exception_try_scope): New struct.
3246 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
3248 (struct gdb_exception_RETURN_MASK_ALL)
3249 (struct gdb_exception_RETURN_MASK_ERROR)
3250 (struct gdb_exception_RETURN_MASK_QUIT): New types.
3252 2015-03-07 Pedro Alves <palves@redhat.com>
3254 * main.c (handle_command_errors): Remove volatile qualifier from
3257 2015-03-07 Pedro Alves <palves@redhat.com>
3259 * breakpoint.c (save_breakpoints): Adjust to avoid code between
3261 * gdbtypes.c (safe_parse_type): Remove empty line.
3262 (types_deeply_equal):
3263 * guile/scm-frame.c (gdbscm_frame_name):
3264 * linux-thread-db.c (find_new_threads_once):
3265 * python/py-breakpoint.c (bppy_get_commands):
3266 * record-btrace.c (record_btrace_insert_breakpoint)
3267 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
3268 (record_btrace_start_replaying): Adjust to avoid code between TRY
3271 2015-03-07 Pedro Alves <palves@redhat.com>
3273 * common/common-exceptions.c (struct catcher) <exception>: No
3274 longer a pointer to volatile exception. Now an exception value.
3275 <mask>: Delete field.
3276 (exceptions_state_mc_init): Remove all parameters. Adjust.
3277 (exceptions_state_mc): No longer pop the catcher here.
3278 (exceptions_state_mc_catch): New function.
3279 (throw_exception): Adjust.
3280 * common/common-exceptions.h (exceptions_state_mc_init): Remove
3282 (exceptions_state_mc_catch): Declare.
3283 (TRY_CATCH): Rename to ...
3284 (TRY): ... this. Remove EXCEPTION and MASK parameters.
3285 (CATCH, END_CATCH): New.
3286 All callers adjusted.
3288 2015-03-07 Tom Tromey <tromey@redhat.com>
3290 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
3292 2015-03-07 Pedro Alves <palves@redhat.com>
3294 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
3295 (amd64_epilogue_frame_cache): Normal exception handling code.
3296 * break-catch-throw.c (check_status_exception_catchpoint)
3297 (re_set_exception_catchpoint): Ditto.
3298 * cli/cli-interp.c (safe_execute_command):
3299 * cli/cli-script.c (script_from_file): Ditto.
3300 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
3302 * compile/compile-object-run.c (compile_object_run): Ditto.
3303 * cp-abi.c (baseclass_offset): Ditto.
3304 * cp-valprint.c (cp_print_value): Ditto.
3305 * exceptions.c (catch_exceptions_with_msg):
3306 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
3307 * frame.c (get_frame_address_in_block_if_available): Ditto.
3308 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
3309 (i386_sigtramp_frame_cache): Ditto.
3310 * infcmd.c (post_create_inferior): Ditto.
3311 * linespec.c (parse_linespec, find_linespec_symbols):
3312 * p-valprint.c (pascal_object_print_value): Ditto.
3313 * parse.c (parse_expression_for_completion): Ditto.
3314 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
3315 * remote.c (remote_get_noisy_reply): Ditto.
3316 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
3317 * solib-svr4.c (solib_svr4_r_map): Ditto.
3319 2015-03-06 Gary Benson <gbenson@redhat.com>
3321 * common/common-utils.h (startswith): New inline function.
3322 All places where this logic was used updated to use the above.
3324 2015-03-05 Pedro Alves <palves@redhat.com>
3327 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
3328 after reading the breakpoint's shadow memory.
3330 2015-03-05 Mark Kettenis <kettenis@gnu.org>
3332 * hppabsd-nat.c: Remove file.
3333 * hppaobsd-nat.c: New file.
3334 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
3336 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
3339 2015-03-04 Pedro Alves <palves@redhat.com>
3341 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
3342 (target_decr_pc_after_break): Delete declaration.
3343 * target.c (default_target_decr_pc_after_break)
3344 (target_decr_pc_after_break): Delete.
3345 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
3346 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
3347 * linux-thread-db.c (check_event): Likewise.
3348 * infrun.c (adjust_pc_after_break): Likewise.
3349 * darwin-nat.c (cancel_breakpoint): Likewise.
3350 * aix-thread.c (aix_thread_wait): Likewise.
3351 * target-delegates.c: Regenerate.
3353 2015-03-04 Pedro Alves <palves@redhat.com>
3355 * linux-nat.c (save_sigtrap): Check for breakpoints before
3356 checking watchpoints.
3357 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
3358 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
3359 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
3360 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
3361 (linux_nat_stopped_by_sw_breakpoint)
3362 (linux_nat_supports_stopped_by_sw_breakpoint)
3363 (linux_nat_stopped_by_hw_breakpoint)
3364 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
3365 (linux_nat_wait_1): Don't re-increment the PC if relying on
3366 SIGTRAP's siginfo->si_code.
3367 (linux_nat_add_target): Install new target methods.
3368 * linux-thread-db.c (check_event): Don't account for breakpoint PC
3369 offset if the target already adjusted the PC.
3370 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
3371 (GDB_ARCH_TRAP_BRKPT): New.
3372 (TRAP_HWBKPT): Define if not already defined.
3374 2015-03-04 Pedro Alves <palves@redhat.com>
3376 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
3377 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
3379 <stop_reason>: New field.
3380 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
3381 (packet_set_cmd_state): New function.
3382 (remote_protocol_features): Register the "swbreak" and "hwbreak"
3384 (remote_query_supported): If not disabled with the corresponding
3385 "set remote foo-packet" command, report support for the swbreak
3386 and hwbreak features.
3387 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
3389 <stop_reason>: New field.
3390 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
3391 (remote_wait_as): Adjust.
3392 (remote_stopped_by_sw_breakpoint)
3393 (remote_supports_stopped_by_sw_breakpoint)
3394 (remote_stopped_by_hw_breakpoint)
3395 (remote_supports_stopped_by_hw_breakpoint): New functions.
3396 (remote_stopped_by_watchpoint): New function.
3397 (init_remote_ops): Install them.
3398 (_initialize_remote): Register new "set/show remote
3399 swbreak-feature-packet" and "set/show remote
3400 swbreak-feature-packet" commands.
3402 2015-03-04 Pedro Alves <palves@redhat.com>
3404 * btrace.h: Include target/waitstatus.h.
3405 (struct btrace_thread_info) <stop_reason>: New field.
3406 * record-btrace.c (record_btrace_step_thread): Use
3407 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3408 (record_btrace_decr_pc_after_break): Delete.
3409 (record_btrace_stopped_by_sw_breakpoint)
3410 (record_btrace_supports_stopped_by_sw_breakpoint)
3411 (record_btrace_stopped_by_hw_breakpoint)
3412 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
3413 (init_record_btrace_ops): Install them.
3414 * record-full.c (record_full_hw_watchpoint): Delete and replace
3416 (record_full_stop_reason): ... this throughout.
3417 (record_full_exec_insn): Adjust.
3418 (record_full_wait_1): Adjust. No longer re-increment the PC.
3419 (record_full_wait_1): Adjust. Use
3420 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3421 (record_full_stopped_by_watchpoint): Adjust.
3422 (record_full_stopped_by_sw_breakpoint)
3423 (record_full_supports_stopped_by_sw_breakpoint)
3424 (record_full_supports_stopped_by_sw_breakpoint)
3425 (record_full_stopped_by_hw_breakpoint)
3426 (record_full_supports_stopped_by_hw_breakpoint): New functions.
3427 (init_record_full_ops, init_record_full_core_ops): Install them.
3428 * record.c (record_check_stopped_by_breakpoint): New function.
3429 * record.h: Include target/waitstatus.h.
3430 (record_check_stopped_by_breakpoint): New declaration.
3432 2015-03-04 Pedro Alves <palves@redhat.com>
3434 enum lwp_stop_reason -> enum target_stop_reason
3435 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
3436 (linux_nat_stopped_by_watchpoint, status_callback)
3437 (linux_nat_wait_1): Adjust.
3438 * linux-nat.h (enum lwp_stop_reason): Delete.
3439 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
3440 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
3441 * target/waitstatus.h (enum target_stop_reason): New.
3443 2015-03-04 Pedro Alves <palves@redhat.com>
3445 * breakpoint.c (need_moribund_for_location_type): New function.
3446 (bpstat_stop_status): Don't skipping checking moribund locations
3447 of breakpoint types which the target tell caused a stop.
3448 (program_breakpoint_here_p): New function, factored out from ...
3449 (bp_loc_is_permanent): ... this.
3450 (update_global_location_list): Don't create a moribund location if
3451 the target supports reporting stops of the type of the removed
3453 * breakpoint.h (program_breakpoint_here_p): New declaration.
3454 * infrun.c (adjust_pc_after_break): Return early if the target has
3455 already adjusted the PC. Add comments.
3456 (handle_signal_stop): If nothing explains a signal, and the target
3457 tells us the stop was caused by a software breakpoint, check if
3458 there's a breakpoint instruction in the memory. If so, adjust the
3459 PC before presenting the stop to the user. Otherwise, ignore the
3460 trap. If nothing explains a signal, and the target tells us the
3461 stop was caused by a hardware breakpoint, ignore the trap.
3462 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
3463 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
3464 to_supports_stopped_by_hw_breakpoint>: New fields.
3465 (target_stopped_by_sw_breakpoint)
3466 (target_supports_stopped_by_sw_breakpoint)
3467 (target_stopped_by_hw_breakpoint)
3468 (target_supports_stopped_by_hw_breakpoint): Define.
3469 * target-delegates.c: Regenerate.
3471 2015-03-04 Pedro Alves <palves@redhat.com>
3473 * infrun.c (follow_fork_inferior): Use the whole of the
3474 inferior_ptid and pending_follow.related_pid ptids instead of
3475 building ptids from the process components. Adjust verbose output
3476 to use target_pid_to_str.
3477 * linux-nat.c (linux_child_follow_fork): Use the whole of the
3478 inferior_ptid and pending_follow.related_pid ptids instead of
3479 building ptids from the process components.
3481 2015-03-04 Mark Kettenis <kettenis@gnu.org>
3483 * inf-ptrace.c [PT_GET_PROCESS_STATE]
3484 (inf_ptrace_insert_fork_catchpoint): New function.
3485 (inf_ptrace_remove_fork_catchpoint): New function.
3486 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
3488 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3490 * s390-linux-tdep.c (s390_register_name): Return empty string
3491 instead of NULL for registers that shouldn't be visible.
3493 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3495 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
3496 XML file for 64-bit targets.
3498 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
3500 * target.h (find_default_create_inferior): Remove declaration.
3501 (find_default_attach): Likewise.
3503 2015-03-03 Pedro Alves <palves@redhat.com>
3505 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
3506 Use ptid_get_pid to get the overall process id when resuming all
3509 2015-03-03 Pedro Alves <palves@redhat.com>
3511 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
3512 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
3513 * inf-ptrace.c (get_ptrace_pid): New function.
3514 (inf_ptrace_resume): Use it.
3515 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
3518 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3520 * nat/linux-btrace.c: Include sys/utsname.h.
3521 (linux_determine_kernel_ptr_bits): New.
3522 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
3523 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
3526 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3528 * btrace.c (ftrace_update_function): Treat return as tailcall for
3529 "_dl_runtime_resolve".
3531 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3533 * btrace.h (btrace_function) <lbegin, lend>: Remove.
3534 * btrace.c (ftrace_debug): Do not print the line range.
3535 (ftrace_skip_file, ftrace_update_lines): Remove.
3536 (ftrace_new_function): Remove lbegin and lend initialization.
3537 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
3538 * record-btrace.c (btrace_compute_src_line_range): New.
3539 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
3541 2015-03-02 Pedro Alves <palves@redhat.com>
3543 * infrun.c (follow_exec): Delete all threads of the process except
3544 the event thread. Extended comments.
3546 2015-03-02 Joel Brobecker <brobecker@adacore.com>
3548 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
3550 2015-03-02 Joel Brobecker <brobecker@adacore.com>
3552 * utils.h: Remove <stdbool.h> #include.
3553 (producer_is_gcc): Change return type to "int".
3554 * utils.c (producer_is_gcc): Change return type to int.
3555 Return 1 instead of true, and 0 instead of false.
3556 Adjust function documentation accordingly.
3558 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
3560 * s390-linux-nat.c (have_regset_vxrs): New static variable.
3561 (s390_linux_fetch_inferior_registers): Handle vector registers, if
3563 (s390_linux_store_inferior_registers): Likewise.
3564 (s390_get_hwcap): Remove function. Embed its logic...
3565 (s390_read_description): ...here. Yield a target description with
3566 vector registers if applicable.
3567 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
3568 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
3569 "features/s390x-tevx-linux64.c".
3570 (struct gdbarch_tdep) <v0_full_regnum>: New field.
3571 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
3572 for "GNU/Linux-specific registers".
3573 (s390_dwarf_reg_r0l): New enum value.
3574 (s390_dwarf_reg_to_regnum): Support vector registers.
3575 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
3576 of GPR lower halves.
3577 (regnum_is_vxr_full): New function.
3578 (s390_register_name): New function.
3579 (s390_pseudo_register_name): Handle v0-v15, which are composed of
3580 f0-f15 and v0l-v15l.
3581 (s390_pseudo_register_type): Likewise.
3582 (s390_pseudo_register_read): Likewise.
3583 (s390_pseudo_register_write): Likewise.
3584 (s390_value_from_register): Account for the fact that values are
3585 placed left-justified in vector registers.
3586 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
3587 the vector reggroup and omit them from the general reggroup.
3588 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
3589 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
3590 (s390_iterate_over_regset_sections): Add iterations for the two
3592 (s390_core_read_description): Yield a target description with
3593 vector registers if applicable.
3594 (s390_gdbarch_init): Handle target descriptions with vector
3595 registers. Add "register_name" gdbarch method.
3596 (_initialize_s390_tdep): Call new tdesc initialization functions.
3597 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
3598 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
3599 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
3600 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
3601 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
3602 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
3603 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
3604 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
3605 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
3606 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
3607 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
3608 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
3609 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
3610 (S390_NUM_REGS): Adjust value.
3611 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
3612 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
3613 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
3614 * NEWS: Announce S/390 vector register support.
3616 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
3618 * features/s390-tevx-linux64.xml: New file.
3619 * features/s390-vx-linux64.xml: New file.
3620 * features/s390-vx.xml: New file.
3621 * features/s390x-tevx-linux64.xml: New file.
3622 * features/s390x-vx-linux64.xml: New file.
3623 * features/Makefile (WHICH): Add s390-vx-linux64,
3624 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
3625 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
3626 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
3628 * features/s390-tevx-linux64.c: New generated file.
3629 * features/s390-vx-linux64.c: Likewise.
3630 * features/s390x-tevx-linux64.c: Likewise.
3631 * features/s390x-vx-linux64.c: Likewise.
3632 * regformats/s390-tevx-linux64.dat: Likewise.
3633 * regformats/s390-vx-linux64.dat: Likewise.
3634 * regformats/s390x-tevx-linux64.dat: Likewise.
3635 * regformats/s390x-vx-linux64.dat: Likewise.
3637 2015-02-28 Doug Evans <xdje42@gmail.com>
3639 * symtab.h (struct symtab) <next>: Fix comment.
3641 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
3643 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
3646 2015-02-27 Pedro Alves <palves@redhat.com>
3648 * dtrace-probe.c (dtrace_probe_ops): Make extern.
3650 2015-02-27 Pedro Alves <palves@redhat.com>
3652 * common/common-exceptions.h (exception_none): Declare.
3653 * common/common-exceptions.c (exception_none): Moved from
3655 (exceptions_state_mc_init): Use exception_none.
3656 * exceptions.c (exception_none): Move to
3657 common/common-exceptions.c.
3658 * exceptions.h (exception_none): Move to
3659 common/common-exceptions.h.
3661 2015-02-27 Pedro Alves <palves@redhat.com>
3663 * main.c (catch_command_errors, catch_command_errors_const):
3664 Remove 'mask' argument. Adjust.
3665 (captured_main): Adjust callers.
3667 2015-02-27 Pedro Alves <palves@redhat.com>
3669 * python/python-internal.h: Include "extension-priv.h".
3671 2015-02-27 Pedro Alves <palves@redhat.com>
3673 * breakpoint.h (enum print_stop_action): Move further up in the
3676 2015-02-27 Pedro Alves <palves@redhat.com>
3678 * gdbarch.sh: Include regcache.h.
3679 * gdbarch.h: Regenerate.
3681 2015-02-27 Pedro Alves <palves@redhat.com>
3683 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
3684 Remove duplicate const.
3685 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
3688 2015-02-27 Pedro Alves <palves@redhat.com>
3690 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
3691 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
3692 * features/feature_to_c.sh: Tag the generated xml_builtin array
3693 with extern const in C++ mode.
3695 2015-02-27 Tom Tromey <tromey@redhat.com>
3697 * minidebug.c (struct lzma_stream): Rename to ...
3698 (struct gdb_lzma_stream): ... this.
3699 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
3701 2015-02-27 Pedro Alves <palves@redhat.com>
3703 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
3705 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
3706 (mi_cmd_stack_list_variables): Use it.
3708 2015-02-27 Pedro Alves <palves@redhat.com>
3710 * x86-linux-nat.c (u_debugreg_offset): New function.
3711 (x86_linux_dr_get, x86_linux_dr_set): Use it.
3713 2015-02-27 Pedro Alves <palves@redhat.com>
3715 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
3717 Include break-common.h.
3719 2015-02-27 Tom Tromey <tromey@redhat.com>
3720 Pedro Alves <palves@redhat.com>
3722 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
3723 local used to iterate over enums.
3724 * completer.c (signal_completer): Likewise.
3725 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
3726 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
3727 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
3728 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
3729 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
3730 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
3731 * tui-wingeneral.c (tui_refresh_all): Likewise.
3733 2015-02-27 Pedro Alves <palves@redhat.com>
3735 * target.h: Include "infrun.h".
3737 2015-02-27 Pedro Alves <palves@redhat.com>
3739 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
3741 2015-02-27 Pedro Alves <palves@redhat.com>
3743 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
3745 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
3747 2015-02-27 Pedro Alves <palves@redhat.com>
3749 * cli-out.c (_rl_erase_entire_line): Move declaration out of
3750 cli_mld_erase_entire_line, and make it extern "C".
3751 * common/common-defs.h (EXTERN_C): New.
3752 * completer.c (_rl_completion_prefix_display_length)
3753 (_rl_print_completions_horizontally, QSFUNC): Move declarations
3754 out of gdb_display_match_list_1.
3755 (_rl_qsort_string_compare): Move declaration out of
3756 gdb_display_match_list_1, and make it extern "C".
3757 * defs.h (re_comp): Use EXTERN_C.
3758 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
3759 and make it extern "C".
3760 (monstartup): Move declaration out of maintenance_set_profile_cmd,
3761 and make it extern "C".
3762 (main): Move declaration out of maintenance_set_profile_cmd.
3763 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
3766 2015-02-27 Pedro Alves <palves@redhat.com>
3768 * python/python.c (GdbMethods): Rename to ...
3769 (python_GdbMethods): ... this and make extern.
3770 (GdbModuleDef): Rename to ...
3771 (python_GdbModuleDef): ... this and make extern.
3773 2015-02-27 Pedro Alves <palves@redhat.com>
3775 * record-btrace.c (set_record_btrace_cmdlist)
3776 (show_record_btrace_cmdlist): Remove redefinitions.
3778 2015-02-27 Tom Tromey <tromey@redhat.com>
3779 Pedro Alves <palves@redhat.com>
3781 * dwarf2-frame.c (enum cfa_how_kind, struct
3782 dwarf2_frame_state_reg_info): Move out of struct
3784 * dwarf2read.c (struct tu_stats): Move out of struct
3786 (struct file_entry): Move out of struct line_header.
3787 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
3788 typedef_field_list): Move out of struct field_info.
3789 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
3790 Move out of struct dynamic_prop.
3791 (union type_owner, union field_location, struct field, struct
3792 range_bounds, union type_specific): Move out of struct main_type.
3793 (struct fn_fieldlist, struct fn_field, struct typedef_field)
3794 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
3795 (struct call_site_target, union call_site_parameter_u, struct
3796 call_site_parameter): Move out of struct call_site.
3797 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
3799 (enum srcdest_kind): Move out of struct srcdest.
3800 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
3801 * prologue-value.h (enum prologue_value_kind): Move out of struct
3803 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
3805 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
3806 out of struct field_info.
3807 * symfile.h (struct other_sections): Move out of struct
3809 * symtab.c (struct symbol_cache_slot): Move out struct
3811 * target-descriptions.c (enum tdesc_type_kind): Move out of
3812 typedef struct tdesc_type.
3813 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
3814 struct tui_line_or_address.
3815 * value.c (enum internalvar_kind, union internalvar_data): Move
3816 out of struct internalvar.
3817 * xtensa-tdep.h (struct ctype_cache): Move out of struct
3820 2015-02-27 Tom Tromey <tromey@redhat.com>
3821 Pedro Alves <palves@redhat.com>
3823 Rename symbols whose names are reserved C++ keywords throughout.
3825 2015-02-27 Pedro Alves <palves@redhat.com>
3827 * Makefile.in (COMPILER): New, get it from autoconf.
3828 (COMPILE.pre, CC_LD): Use COMPILER.
3829 (CXX): Get from autoconf instead.
3830 (CXX_FOR_TARGET): Default to g++ instead of gcc.
3831 * acinclude.m4: Include build-with-cxx.m4.
3832 * build-with-cxx.m4: New file.
3833 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
3834 Disable -Werror by default if building in C++ mode.
3835 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
3836 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
3837 Run supported-warning-flags tests with the C++ compiler.
3838 Save/restore CXXFLAGS too.
3839 * configure: Regenerate.
3841 2015-02-27 Pedro Alves <palves@redhat.com>
3843 * libiberty.m4: New file.
3844 * acinclude.m4: Include libiberty.m4.
3845 * configure.ac: Call libiberty_INIT.
3846 * config.in, configure: Regenerate.
3848 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
3850 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
3851 31-bit targets, but 64-bit targets as well.
3852 (s390_gnu_triplet_regexp): New function.
3853 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
3854 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
3857 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
3859 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
3860 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
3861 from CONTEXT_DEBUGGER.
3863 2015-02-26 Doug Evans <dje@google.com>
3865 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
3867 (set_type_vptr_fieldno): Ditto.
3868 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
3869 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
3871 2015-02-26 Pedro Alves <palves@redhat.com>
3873 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
3874 * complaints.c (vcomplaint): Pass argument FMT directly to
3875 printf-like functions instead of complaint->fmt.
3876 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
3877 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
3878 * compile/compile-loc2c.c (pushf, unary, binary): Add
3880 (do_compile_dwarf_expr_to_c): Pass string literal as format string
3882 (BINARY): Pass string literal as format string to 'binary'.
3883 * compile/compile-object-load.c (link_callbacks_einfo): Add
3885 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
3887 2015-02-26 Pedro Alves <palves@redhat.com>
3889 * windows-termcap.c: Rename to ...
3890 * stub-termcap.c: ... this. Adjust header line.
3891 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
3893 * configure: Regenerate.
3894 * configure.ac: Refer to stub-termcap.o instead of
3896 * gdb_curses.h: Mention stub-termcap.c instead of
3899 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3901 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
3902 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
3904 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
3906 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
3908 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3910 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
3911 bfd_canonicalize_symtab.
3913 2015-02-25 John Baldwin <jhb@FreeBSD.org>
3915 * amd64fbsd-nat.c: Include sys/user.h.
3916 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3917 instead of KERN_PS_STRINGS to locate the signal trampoline.
3918 * i386fbsd-nat.c: Include sys/user.h.
3919 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3920 instead of KERN_PS_STRINGS to locate the signal trampoline.
3921 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
3922 (amd64fbsd_sigtramp_p): New.
3923 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
3924 longer set default values.
3925 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
3926 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
3927 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
3928 (i386fbsd_freebsd4_sigtramp_start)
3929 (i386fbsd_freebsd4_sigtramp_middle)
3930 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
3931 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
3932 (i386fbsd_sigtramp_p): New.
3933 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
3934 longer set default values.
3935 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
3937 2015-02-25 John Baldwin <jhb@freebsd.org>
3939 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
3940 get_frame_register instead of frame_unwind_register_unsigned.
3942 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3945 * compile/compile-c-support.c (c_compute_program): Change // comment.
3946 * compile/compile-object-load.c (setup_sections): Change // comment.
3948 2015-02-26 Joel Brobecker <brobecker@adacore.com>
3951 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
3953 2015-02-23 Pedro Alves <palves@redhat.com>
3955 * remote.c (skip_to_semicolon): New function.
3956 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
3957 special case the stop reasons that look like hex numbers
3958 upfront. Instead handle real register numbers after matching
3959 all the known stop reasons.
3961 2015-02-21 Doug Evans <dje@google.com>
3963 PR c++/17976, symtab/17821
3964 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
3965 is_in_anonymous. All callers updated.
3966 (find_symbol_in_baseclass): Ditto.
3967 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
3968 for symbols in an anonymous namespace.
3969 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
3970 DW_AT_name directly.
3971 (dwarf2_name): Convert missing namespace name to
3972 CP_ANONYMOUS_NAMESPACE_STR.
3974 2015-02-20 Pedro Alves <palves@redhat.com>
3976 * linux-nat.c (linux_handle_extended_wait): Call
3977 thread_db_notice_clone whenever a new clone LWP is detected.
3978 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
3980 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
3981 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
3982 (linux_unstop_all_lwps): Declare.
3983 * linux-thread-db.c (struct thread_get_info_inout): Delete.
3984 (thread_get_info_callback): Delete.
3985 (thread_from_lwp): Use td_thr_get_info and record_thread.
3986 (thread_db_attach_lwp): Delete.
3987 (thread_db_notice_clone): New function.
3988 (try_thread_db_load_1): If /proc is mounted and shows the
3989 process'es task list, walk over all LWPs and call thread_from_lwp
3990 instead of relying on td_ta_thr_iter.
3991 (attach_thread): Don't call check_thread_signals here. Split the
3992 tail part of the function (which adds the thread to the core GDB
3994 (record_thread): ... this function. Call check_thread_signals
3996 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
3997 call thread_from_lwp.
3998 (thread_db_update_thread_list): Rename to ...
3999 (thread_db_update_thread_list_org): ... this.
4000 (thread_db_update_thread_list): New function.
4001 (thread_db_find_thread_from_tid): Delete.
4002 (thread_db_get_ada_task_ptid): Simplify.
4003 * nat/linux-procfs.c: Include <sys/stat.h>.
4004 (linux_proc_task_list_dir_exists): New function.
4005 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
4007 2015-02-20 Pedro Alves <palves@redhat.com>
4009 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
4010 main LWP. Handle the case of waitpid returning 0 if we're already
4011 attached to the LWP. Don't set the LWP's last_resume_kind to
4012 resume_stop if we already knew about the LWP.
4013 (linux_nat_filter_event): Add debug logs.
4015 2015-02-20 Pedro Alves <palves@redhat.com>
4017 * target.h (forward_target_decr_pc_after_break): Delete
4020 2015-02-20 Pedro Alves <palves@redhat.com>
4023 * linux-thread-db.c (thread_get_info_callback): Return early if
4024 the thread's lwp id is -1.
4026 2015-02-20 Joel Brobecker <brobecker@adacore.com>
4030 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
4032 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
4033 (dtrace_get_probes) Change type of variable 'dof'.
4035 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
4037 PR breakpoints/16812
4038 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
4039 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
4040 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
4042 2015-02-19 David Taylor <dtaylor@emc.com>
4044 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
4046 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
4048 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
4050 (tui_putc): Don't call tui_handle_resize_during_io.
4051 (tui_getc): Likewise.
4052 (tui_mld_getc): Likewise.
4053 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
4054 (tui_sigwinch_token): New static variable.
4055 (tui_initialize_win): Adjust documentation. Set
4057 (tui_async_resize_screen): New asynchronous callback.
4058 (tui_sigwinch_handler): Adjust documentation. Asynchronously
4059 invoke tui_async_resize_screen.
4061 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
4063 * configure: Regenerated.
4064 * configure.ac: Use GDB_AC_TRANSFORM.
4065 * Makefile.in (aclocal_m4_deps): Added transform.m4.
4066 * acinclude.m4: sinclude transform.m4.
4067 * transform.m4: New file.
4068 (GDB_AC_TRANSFORM): New macro.
4070 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4072 * NEWS: Announce the support for DTrace SDT probes.
4074 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4076 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
4077 (amd64_dtrace_parse_probe_argument): New function.
4078 (amd64_dtrace_probe_is_enabled): Likewise.
4079 (amd64_dtrace_enable_probe): Likewise.
4080 (amd64_dtrace_disable_probe): Likewise.
4081 (amd64_linux_init_abi): Register the
4082 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
4083 `gdbarch_dtrace_disable_probe' and
4084 `gdbarch_dtrace_probe_is_enabled' hooks.
4085 (amd64_dtrace_disabled_probe_sequence_1): New constant.
4086 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
4087 (amd64_dtrace_enable_probe_sequence): Likewise.
4088 (amd64_dtrace_disable_probe_sequence): Likewise.
4090 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4092 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
4093 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
4094 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
4096 * Makefile.in (SFILES): dtrace-probe.c added.
4097 * configure: Regenerate.
4098 * dtrace-probe.c: New file.
4099 (SHT_SUNW_dof): New constant.
4100 (dtrace_probe_type): New enum.
4101 (dtrace_probe_arg): New struct.
4102 (dtrace_probe_arg_s): New typedef.
4103 (struct dtrace_probe_enabler): New struct.
4104 (dtrace_probe_enabler_s): New typedef.
4105 (dtrace_probe): New struct.
4106 (dtrace_probe_is_linespec): New function.
4107 (dtrace_dof_sect_type): New enum.
4108 (dtrace_dof_dofh_ident): Likewise.
4109 (dtrace_dof_encoding): Likewise.
4110 (DTRACE_DOF_ENCODE_LSB): Likewise.
4111 (DTRACE_DOF_ENCODE_MSB): Likewise.
4112 (dtrace_dof_hdr): New struct.
4113 (dtrace_dof_sect): Likewise.
4114 (dtrace_dof_provider): Likewise.
4115 (dtrace_dof_probe): Likewise.
4116 (DOF_UINT): New macro.
4117 (DTRACE_DOF_PTR): Likewise.
4118 (DTRACE_DOF_SECT): Likewise.
4119 (dtrace_process_dof_probe): New function.
4120 (dtrace_process_dof): Likewise.
4121 (dtrace_build_arg_exprs): Likewise.
4122 (dtrace_get_arg): Likewise.
4123 (dtrace_get_probes): Likewise.
4124 (dtrace_get_probe_argument_count): Likewise.
4125 (dtrace_can_evaluate_probe_arguments): Likewise.
4126 (dtrace_evaluate_probe_argument): Likewise.
4127 (dtrace_compile_to_ax): Likewise.
4128 (dtrace_probe_destroy): Likewise.
4129 (dtrace_gen_info_probes_table_header): Likewise.
4130 (dtrace_gen_info_probes_table_values): Likewise.
4131 (dtrace_probe_is_enabled): Likewise.
4132 (dtrace_probe_ops): New variable.
4133 (info_probes_dtrace_command): New function.
4134 (_initialize_dtrace_probe): Likewise.
4135 (dtrace_type_name): Likewise.
4137 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4139 * gdbarch.sh (dtrace_parse_probe_argument): New.
4140 (dtrace_probe_is_enabled): Likewise.
4141 (dtrace_enable_probe): Likewise.
4142 (dtrace_disable_probe): Likewise.
4143 * gdbarch.c: Regenerate.
4144 * gdbarch.h: Regenerate.
4146 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4148 * stap-probe.c (stap_probe_ops): Add NULLs in the static
4149 stap_probe_ops for `enable_probe' and `disable_probe'.
4150 * probe.c (enable_probes_command): New function.
4151 (disable_probes_command): Likewise.
4152 (_initialize_probe): Define the cli commands `enable probe' and
4154 (parse_probe_linespec): New function.
4155 (info_probes_for_ops): Use parse_probe_linespec.
4156 * probe.h (probe_ops): New hooks `enable_probe' and
4159 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4161 * probe.c (compute_probe_arg): Moved from stap-probe.c
4162 (compile_probe_arg): Likewise.
4163 (probe_funcs): Likewise.
4164 * stap-probe.c (compute_probe_arg): Moved to probe.c.
4165 (compile_probe_arg): Likewise.
4166 (probe_funcs): Likewise.
4168 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4170 * probe.c (print_ui_out_not_applicables): New function.
4171 (exists_probe_with_pops): Likewise.
4172 (info_probes_for_ops): Do not include column headers for probe
4173 types for which no probe has been actually found on any object.
4174 Also invoke `print_ui_out_not_applicables' in order to match the
4175 column rows with the header when probes of several types are
4177 Print the "Type" column.
4178 * probe.h (probe_ops): Added a new probe operation `type_name'.
4179 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
4180 (stap_type_name): New function.
4182 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
4184 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
4185 (key_is_command_char): Delete.
4187 2015-02-17 Pedro Alves <palves@redhat.com>
4189 * tui/tui.c (tui_enable): Resize windows before anything
4190 might show a window.
4192 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
4195 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
4196 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
4198 * aarch64-tdep.h (tdesc_aarch64): Declare.
4200 2015-02-12 Mark Wielaard <mjw@redhat.com>
4202 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
4204 2015-02-13 Doug Evans <dje@google.com>
4206 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
4207 anonymous_namespace to is_in_anonymous for consistency with the rest
4209 (cp_lookup_bare_symbol): Fix typo in comment.
4210 (cp_search_static_and_baseclasses): Ditto.
4211 (search_symbol_list): Use vertical space in comment better.
4212 (reset_directive_searched): Ditto. Fix typo.
4213 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
4215 2015-02-13 Yao Qi <yao.qi@arm.com>
4217 * MAINTAINERS: Update my email address.
4219 2015-02-12 Doug Evans <dje@google.com>
4221 * symtab.c (completion_list_add_name): Fix memory leak.
4223 2015-02-12 Doug Evans <dje@google.com>
4225 * completer.c (complete_line): Remove incorrect comment.
4227 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4229 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
4230 (py_print_frame): Use RETURN_MASK_ERROR.
4232 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4234 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
4235 function comment. Wrap all function that can throw in cleanups.
4236 (gdbpy_apply_frame_filter): Wrap all function that can throw in
4239 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4241 * python/py-framefilter.c (py_print_frame): Substitute goto error.
4242 Remove the error label.
4244 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4246 * python/py-framefilter.c (py_print_frame): Put conditional code paths
4247 with goto first, indent the former else codepath left. Put variable
4248 'elided' to a new inner block.
4250 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4252 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
4254 2015-02-11 Pedro Alves <palves@redhat.com>
4256 * xcoffread.c (within_function): Delete.
4258 2015-02-11 Tom Tromey <tromey@redhat.com>
4259 Pedro Alves <palves@redhat.com>
4261 * breakpoint.c (base_breakpoint_ops): Delete.
4262 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
4263 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
4264 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
4265 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
4266 * python/py-arch.c (arch_object_type): Make extern.
4267 * python/py-block.c (block_syms_iterator_object_type): Make extern.
4268 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
4269 * python/py-cmd.c (cmdpy_object_type): Make extern.
4270 * python/py-continueevent.c (continue_event_object_type)
4271 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
4272 parameter. Update all callers.
4273 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
4274 * python/py-exitedevent.c (exited_event_object_type): Make extern.
4275 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
4276 * python/py-function.c (fnpy_object_type): Make extern.
4277 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
4278 * python/py-infevents.c (call_pre_event_object_type)
4279 (inferior_call_post_event_object_type).
4280 (memory_changed_event_object_type): Make extern.
4281 * python/py-infthread.c (thread_object_type): Make extern.
4282 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
4283 * python/py-linetable.c (linetable_entry_object_type)
4284 (linetable_object_type, ltpy_iterator_object_type): Make extern.
4285 * python/py-newobjfileevent.c (new_objfile_event_object_type)
4286 (clear_objfiles_event_object_type): Make extern.
4287 * python/py-objfile.c (objfile_object_type): Make extern.
4288 * python/py-param.c (parmpy_object_type): Make extern.
4289 * python/py-progspace.c (pspace_object_type): Make extern.
4290 * python/py-signalevent.c (signal_event_object_type): Make extern.
4291 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
4292 * python/py-type.c (type_object_type, field_object_type)
4293 (type_iterator_object_type): Make extern.
4294 * python/python.c (python_extension_script_ops)
4295 (python_extension_ops): Make extern.
4296 * stap-probe.c (stap_probe_ops): Make extern.
4298 2015-02-11 Pedro Alves <pedro@codesourcery.com>
4300 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
4301 because the event thread is not the current thread.
4303 2015-02-11 Doug Evans <xdje42@gmail.com>
4305 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
4306 been initialized yet, return NULL.
4308 2015-02-11 Doug Evans <dje@google.com>
4310 * symfile.h (new_symfile_objfile): Delete.
4311 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
4312 All callers updated.
4314 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
4316 * tui/tui-io.c (tui_handle_resize_during_io): Call
4317 tui_update_gdb_sizes() after resizing the screen.
4318 * tui/tui.c (tui_enable): Resize the terminal before
4319 calling tui_update_gdb_sizes().
4321 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
4323 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
4324 line before printing a newline.
4326 2015-02-11 Mark Wielaard <mjw@redhat.com>
4328 * utils.c (producer_is_gcc): Return true or false.
4330 2015-02-10 Mark Wielaard <mjw@redhat.com>
4332 * utils.h (producer_is_gcc): Change return type to bool. Add major
4334 * utils.c (producer_is_gcc): Likewise.
4335 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
4336 * dwarf2read.c (check_producer): Likewise.
4338 2015-02-10 Pedro Alves <palves@redhat.com>
4340 * infrun.c (displaced_step_fixup): Switch to the event thread
4341 before calling gdbarch_displaced_step_fixup.
4343 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
4345 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
4347 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
4349 * ada-varobj.c (ada_name_of_child): Constify parent.
4350 (ada_path_expr_of_child): Same.
4351 (ada_value_of_child): Same.
4352 (ada_type_of_child): Same.
4353 * c-varobj.c (c_is_path_expr_parent): Same.
4354 (c_describe_child): Same.
4355 (c_name_of_child): Same.
4356 (c_value_of_child): Same.
4357 (c_type_of_child): Same.
4358 (cplus_number_of_children): Same.
4359 (cplus_describe_child): Constify var.
4360 (cplus_name_of_child): Constify parent.
4361 (cplus_value_of_child): Same.
4362 (cplus_type_of_child): Same.
4363 * jv-varobj.c (java_name_of_child): Same.
4364 (java_value_of_child): Same.
4365 (java_type_of_child): Same.
4366 * varobj.c (value_of_child): Same.
4367 (varobj_default_is_path_expr_parent): Constify var, parent and return
4369 (varobj_get_path_expr): Constify var, modify path_expr through
4371 (install_new_value): Constify parent.
4372 (value_of_child): Constify parent.
4373 * varobj.h (struct varobj): Constify parent.
4374 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
4376 (varobj_get_path_expr): Constify var.
4377 (varobj_get_path_expr_parent): Constify var and return value.
4379 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
4381 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
4382 (arm_prologue_this_id): Move PC and SP limit checks to
4383 arm_prologue_unwind_stop_reason.
4384 (arm_prologue_unwind) <stop_reason> : Set to
4385 arm_prologue_unwind_stop_reason.
4387 2015-02-09 Mark Wielaard <mjw@redhat.com>
4389 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
4390 DW_LANG_Fortran08 as language_fortran.
4392 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
4395 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
4396 of pointer against char.
4398 2015-02-09 Mark Wielaard <mjw@redhat.com>
4400 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
4401 (c_type_print_modifier): Likewise.
4402 * dwarf2read.c (read_tag_atomic_type): New function.
4403 (read_type_die_1): Handle DW_TAG_atomic_type.
4404 * gdbtypes.c (make_atomic_type): New function.
4405 (recursive_dump_type): Handle TYPE_ATOMIC.
4406 * gdbtypes.h (enum type_flag_values): Renumber.
4407 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
4408 (TYPE_ATOMIC): New macro.
4409 (make_atomic_type): Declare.
4411 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4413 * btrace.c (ftrace_find_call): Skip gaps.
4414 (ftrace_new_function): Initialize level.
4415 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
4416 (ftrace_new_switch): Update
4418 (ftrace_new_gap): New.
4419 (ftrace_update_function): Create new function after gap.
4420 (btrace_compute_ftrace_bts): Create gap on error.
4421 (btrace_stitch_bts): Update parameters. Clear trace if it
4423 (btrace_stitch_trace): Update parameters. Update callers.
4424 (btrace_clear): Reset the number of gaps.
4425 (btrace_insn_get): Return NULL if the iterator points to a gap.
4426 (btrace_insn_number): Return zero if the iterator points to a gap.
4427 (btrace_insn_end): Allow gaps at the end.
4428 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
4429 (btrace_find_insn_by_number): Assert that the found iterator does
4431 (btrace_call_next, btrace_call_prev): Assert that the last function
4433 * btrace.h (btrace_bts_error): New.
4434 (btrace_function): Update comment.
4435 (btrace_function) <insn, insn_offset, number>: Update comment.
4436 (btrace_function) <errcode>: New.
4437 (btrace_thread_info) <ngaps>: New.
4438 (btrace_thread_info) <replay>: Update comment.
4439 (btrace_insn_get): Update comment.
4440 * record-btrace.c (btrace_ui_out_decode_error): New.
4441 (record_btrace_info): Print number of gaps.
4442 (btrace_insn_history, btrace_call_history): Call
4443 btrace_ui_out_decode_error for gaps.
4444 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
4446 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4448 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
4449 * nat/linux-btrace.c: (btrace_this_cpu): New.
4450 (cpu_supports_bts): Call btrace_this_cpu.
4451 (intel_supports_bts): Add cpu parameter.
4453 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4455 * btrace.h (btrace_insn_class): New.
4456 (btrace_insn) <size, iclass>: New.
4457 * btrace.c (ftrace_find_call): Update parameters. Update users.
4458 Use instruction classification.
4459 (ftrace_new_return): Update parameters. Update users.
4460 (ftrace_update_function): Update parameters. Update users. Use
4461 instruction classification.
4462 (ftrace_update_insns): Update parameters. Update users.
4463 (ftrace_classify_insn): New.
4464 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
4465 TRY_CATCH around call to gdb_insn_length.
4467 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4469 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
4470 Update parameters. Update users.
4472 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4474 * btrace.c (parse_xml_btrace_conf_bts): Add size.
4475 (btrace_conf_bts_attributes): New.
4476 (btrace_conf_children): Add attributes.
4477 * common/btrace-common.h (btrace_config_bts): New.
4478 (btrace_config)<bts>: New.
4479 (btrace_config): Update comment.
4480 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
4482 * features/btrace-conf.dtd: Increment version. Add size
4483 attribute to bts element.
4484 * record-btrace.c (set_record_btrace_bts_cmdlist,
4485 show_record_btrace_bts_cmdlist): New.
4486 (record_btrace_adjust_size, record_btrace_print_bts_conf,
4487 record_btrace_print_conf, cmd_set_record_btrace_bts,
4488 cmd_show_record_btrace_bts): New.
4489 (record_btrace_info): Call record_btrace_print_conf.
4490 (_initialize_record_btrace): Add commands.
4491 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
4492 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
4493 (btrace_sync_conf): Synchronize bts size.
4494 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
4495 * NEWS: Announce new commands and new packets.
4497 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4499 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
4500 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
4501 (x86_linux_btrace_conf): New.
4502 (x86_linux_create_target): Initialize to_btrace_conf.
4503 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
4504 Check format. Split into this and ...
4505 (linux_enable_bts): ... this.
4506 (linux_btrace_conf): New.
4507 (perf_event_skip_record): Renamed into ...
4508 (perf_event_skip_bts_record): ... this. Updated users.
4509 (linux_disable_btrace): Split into this and ...
4510 (linux_disable_bts): ... this.
4511 (linux_read_btrace): Check format.
4512 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
4513 (linux_btrace_conf): New.
4514 (btrace_target_info)<ptid>: Moved.
4515 (btrace_target_info)<conf>: New.
4516 (btrace_target_info): Split into this and ...
4517 (btrace_tinfo_bts): ... this. Updated users.
4518 * btrace.c (btrace_enable): Update parameters.
4519 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
4520 (btrace_conf_children, btrace_conf_attributes)
4521 (btrace_conf_elements): New.
4522 * btrace.h (btrace_enable): Update parameters.
4523 (btrace_conf, parse_xml_btrace_conf): New.
4524 * common/btrace-common.h (btrace_config): New.
4525 * feature/btrace-conf.dtd: New.
4526 * record-btrace.c (record_btrace_conf): New.
4527 (record_btrace_cmdlist): New.
4528 (record_btrace_enable_warn, record_btrace_open): Pass
4529 &record_btrace_conf.
4530 (record_btrace_info): Print recording format.
4531 (cmd_record_btrace_bts_start): New.
4532 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
4533 (_initialize_record_btrace): Add "record btrace bts" subcommand.
4534 Add "record bts" alias command.
4535 * remote.c (remote_state)<btrace_config>: New.
4536 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
4537 (remote_protocol_features): Add qXfer:btrace-conf:read.
4538 (remote_open_1): Call remote_btrace_reset.
4539 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
4540 (btrace_target_info)<conf>: New.
4541 (btrace_sync_conf, btrace_read_config): New.
4542 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
4544 (remote_btrace_conf): New.
4545 (init_remote_ops): Initialize to_btrace_conf.
4546 (_initialize_remote): Add qXfer:btrace-conf packet.
4547 * target.c (target_enable_btrace): Update parameters.
4548 (target_btrace_conf): New.
4549 * target.h (target_enable_btrace): Update parameters.
4550 (target_btrace_conf): New.
4551 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
4552 (target_ops)<to_enable_btrace>: Update parameters and comment.
4553 (target_ops)<to_btrace_conf>: New.
4554 * target-delegates: Regenerate.
4555 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
4556 (target_debug_print_const_struct_btrace_target_info_p): New.
4557 * NEWS: Announce new command and new packet.
4559 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4561 * nat/linux-btrace.h (perf_event_buffer): New.
4562 (btrace_target_info) <buffer, size, data_head>: Replace with ...
4564 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
4565 (perf_event_buffer_size, perf_event_buffer_begin)
4566 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
4568 (perf_event_new_data): New.
4570 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4572 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
4573 * record-btrace.c (record_btrace_open): Remove call to
4574 target_supports_btrace.
4575 * remote.c (remote_supports_btrace): Update parameters.
4576 * target.c (target_supports_btrace): Update parameters.
4577 * target.h (to_supports_btrace, target_supports_btrace): Update
4579 * target-delegates.c: Regenerate.
4580 * target-debug.h (target_debug_print_enum_btrace_format): New.
4581 * nat/linux-btrace.c
4582 (kernel_supports_btrace): Rename into ...
4583 (kernel_supports_bts): ... this. Update users. Update warning text.
4584 (intel_supports_btrace): Rename into ...
4585 (intel_supports_bts): ... this. Update users.
4586 (cpu_supports_btrace): Rename into ...
4587 (cpu_supports_bts): ... this. Update users.
4588 (linux_supports_btrace): Update parameters. Split into this and ...
4589 (linux_supports_bts): ... this.
4590 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
4592 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4594 * Makefile.in (SFILES): Add common/btrace-common.c.
4595 (COMMON_OBS): Add common/btrace-common.o.
4596 (btrace-common.o): Add build rules.
4597 * btrace.c (parse_xml_btrace): Update parameters.
4598 (parse_xml_btrace_block): Set format field.
4599 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
4600 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
4601 (btrace_compute_ftrace): Split into this and...
4602 (btrace_compute_ftrace_bts): ...this.
4603 (btrace_stitch_trace): Split into this and...
4604 (btrace_stitch_bts): ...this.
4605 * btrace.h (parse_xml_btrace): Update parameters.
4606 (make_cleanup_btrace_data): New.
4607 * common/btrace-common.c: New.
4608 * common/btrace-common.h: Include common-defs.h.
4609 (btrace_block_s): Update comment.
4610 (btrace_format): New.
4611 (btrace_format_string): New.
4612 (btrace_data_bts): New.
4614 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
4615 * remote.c (remote_read_btrace): Update parameters.
4616 * target.c (target_read_btrace): Update parameters.
4617 * target.h (target_read_btrace): Update parameters.
4618 (target_ops)<to_read_btrace>: Update parameters.
4619 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
4620 * target-delegates.c: Regenerate.
4621 * target-debug (target_debug_print_struct_btrace_data_p): New.
4622 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
4623 (linux_read_bts): ...this.
4624 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
4626 2015-02-06 Doug Evans <dje@google.com>
4628 * remote-m32r-sdi.c: Include symfile.h.
4630 2015-02-06 Doug Evans <dje@google.com>
4632 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
4633 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
4636 2015-02-06 Pedro Alves <palves@redhat.com>
4638 * linux-thread-db.c (find_new_threads_callback): Add debug output.
4640 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
4643 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
4644 (enable_count_command): Check args for NULL value.
4646 2015-02-05 Doug Evans <xdje42@gmail.com>
4648 * guile/scm-frame.c: Fix spelling errors in a comment.
4650 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
4652 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
4653 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
4656 2015-02-04 Pedro Alves <palves@redhat.com>
4658 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
4659 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
4661 (resume_stopped_resumed_lwps): Don't check whether the thread is
4662 marked as executing.
4663 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
4665 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4667 * regset.h (struct regset): Add flags field.
4668 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
4669 * corelow.c (get_core_register_section): Add warning if the size
4670 exceeds the requested size and the regset does not have the
4671 REGSET_VARIABLE_SIZE flag set.
4672 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
4674 * armbsd-tdep.c (armbsd_gregset): Likewise.
4675 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
4676 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
4677 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
4678 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
4680 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4682 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
4683 For ".reg-xstate", explicitly specify the requested section size
4684 via X86_XSTATE_SIZE instead of just 0 on input and
4685 X86_XSTATE_MAX_SIZE on output.
4686 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
4689 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4692 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
4693 function type, particularly its SIZE parameter.
4694 * gdbarch.h: Regenerate.
4695 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
4696 actual against required size using ">=" instead of "==".
4697 (amd64_collect_fpregset): Likewise.
4698 * i386-tdep.c (i386_supply_gregset): Likewise.
4699 (i386_collect_gregset): Likewise.
4700 (i386_supply_fpregset): Likewise.
4701 (i386_collect_fpregset): Likewise.
4702 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
4703 (mips_fill_gregset_wrapper): Likewise.
4704 (mips_supply_fpregset_wrapper): Likewise.
4705 (mips_fill_fpregset_wrapper): Likewise.
4706 (mips64_supply_gregset_wrapper): Likewise.
4707 (mips64_fill_gregset_wrapper): Likewise.
4708 (mips64_supply_fpregset_wrapper): Likewise.
4709 (mips64_fill_fpregset_wrapper): Likewise.
4710 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
4711 (am33_supply_fpregset_method): Likewise.
4712 (am33_collect_gregset_method): Likewise.
4713 (am33_collect_fpregset_method): Likewise.
4715 2015-02-04 Doug Evans <dje@google.com>
4716 Pedro Alves <palves@redhat.com>
4717 Eli Zaretskii <eliz@gnu.org>
4720 * tui/tui-command.c (tui_refresh_cmd_win): New function.
4721 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
4722 * tui/tui-file.c: #include tui/tui-command.h.
4723 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
4724 (tui_file_flush): Refresh command window if stream is gdb_stdout.
4725 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
4727 2015-02-04 Pedro Alves <palves@redhat.com>
4730 * event-loop.c (gdb_do_one_event): Add default switch case.
4732 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4734 Filter out inferior gcc option -fpreprocessed.
4735 * compile/compile.c (filter_args): New function.
4738 2015-02-03 Pedro Alves <palves@redhat.com>
4740 * event-loop.c: Don't declare nor define a queue type for
4742 (event_queue): Delete.
4743 (create_event, create_file_event, gdb_event_xfree)
4744 (initialize_event_loop, process_event): Delete.
4745 (gdb_do_one_event): Return as soon as one event is handled.
4746 (handle_file_event): Change prototype. Used the passed in
4747 file_handler pointer and ready_mask instead of looping over all
4749 (gdb_wait_for_event): Update the poll/select timeouts before
4750 blocking. Run event handlers directly instead of queueing events.
4751 Return as soon as one event is handled.
4752 (struct async_event_handler_data): Delete.
4753 (invoke_async_event_handler): Delete.
4754 (check_async_event_handlers): Change return type to int. Run
4755 event handlers directly instead of queueing events. Return as
4756 soon as one event is handled.
4757 (handle_timer_event): Delete.
4758 (update_wait_timeout): New function, factored out from
4760 (poll_timers): Reimplement.
4761 * event-loop.h (initialize_event_loop): Delete declaration.
4762 * top.c (gdb_init): Don't call initialize_event_loop.
4764 2015-02-03 Pedro Alves <palves@redhat.com>
4766 * event-loop.c (clear_async_event_handler): New function.
4767 * event-loop.h (clear_async_event_handler): New declaration.
4768 * record-btrace.c (record_btrace_async): New function.
4769 (init_record_btrace_ops): Install record_btrace_async.
4770 * record-full.c (record_full_async): New function.
4771 (record_full_resume): Don't mark the async event source here.
4772 (init_record_full_ops): Install record_full_async.
4773 (record_full_core_resume): Don't mark the async event source here.
4774 (init_record_full_core_ops): Install record_full_async.
4775 * remote.c (remote_async): Mark and clear the async stop reply
4776 queue event-loop token as appropriate.
4778 2015-02-03 Pedro Alves <palves@redhat.com>
4780 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
4781 target_is_async_p instead of target_can_async.
4782 (linux_nat_wait): Use target_is_async_p instead of
4783 target_can_async. Don't enable async here.
4784 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
4785 target_is_async_p instead of target_can_async.
4787 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
4789 * varobj.h (lang_varobj_ops): Mention which return values need
4792 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4794 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
4796 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4799 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
4800 results found in the cache.
4802 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4805 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
4806 when allocating a new one.
4808 2015-02-01 Tom Tromey <tom@tromey.com>
4810 * MAINTAINERS: Remove myself.
4812 2015-01-31 Doug Evans <xdje42@gmail.com>
4814 * dwarf2read.c (process_structure_scope): Update setting of
4815 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
4816 * gdbtypes.c (internal_type_vptr_fieldno): New function.
4817 (set_type_vptr_fieldno): New function.
4818 (internal_type_vptr_basetype): New function.
4819 (set_type_vptr_basetype): New function.
4820 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
4822 (allocate_cplus_struct_type): Initialize vptr_fieldno.
4823 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
4824 (print_cplus_stuff): ... moved here.
4825 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
4826 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
4828 (struct cplus_struct_type): ... here. All uses updated.
4829 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
4830 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
4831 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
4832 * stabsread.c (read_tilde_fields): Update setting of
4833 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
4835 2015-01-31 Doug Evans <xdje42@gmail.com>
4837 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
4839 (cp_print_class_member): Rename local domain to self_type.
4840 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
4841 domain_type to self_type.
4842 (set_die_type) <need_gnat_info>: Handle
4843 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
4844 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
4845 TYPE_SPECIFIC_SELF_TYPE.
4846 * gdbtypes.c (internal_type_self_type): New function.
4847 (set_type_self_type): New function.
4848 (smash_to_memberptr_type): Rename parameter domain to self_type.
4849 Update setting of TYPE_SELF_TYPE.
4850 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
4851 (smash_to_method_type): Rename parameter domain to self_type.
4852 Update setting of TYPE_SELF_TYPE.
4853 (check_stub_method): Call smash_to_method_type.
4854 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
4855 (copy_type_recursive): Ditto.
4856 * gdbtypes.h (enum type_specific_kind): New value
4857 TYPE_SPECIFIC_SELF_TYPE.
4858 (struct main_type) <type_specific>: New member self_type.
4859 (struct cplus_struct_type) <fn_field.type>: Update comment.
4860 (TYPE_SELF_TYPE): Rewrite.
4861 (internal_type_self_type, set_type_self_type): Declare.
4862 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
4864 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
4865 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
4867 * stabsread.c (read_member_functions): Mark methods with
4868 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
4871 2015-01-31 Doug Evans <xdje42@gmail.com>
4873 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
4876 2015-01-31 Doug Evans <xdje42@gmail.com>
4878 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
4879 or unions. Return zero if union.
4880 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
4881 (gnuv3_rtti_type): Pass already-check_typedef'd value to
4883 (compute_vtable_size): Assert only passed structs.
4884 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
4886 2015-01-31 Doug Evans <xdje42@gmail.com>
4888 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
4891 2015-01-31 Gary Benson <gbenson@redhat.com>
4892 Doug Evans <dje@google.com>
4897 * cli/cli-cmds.c (complete_command): Notify user if max-completions
4899 * common/common-exceptions.h (enum errors)
4900 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
4901 * completer.h (get_max_completions_reached_message): New declaration.
4902 (max_completions): Likewise.
4903 (completion_tracker_t): New typedef.
4904 (new_completion_tracker): New declaration.
4905 (make_cleanup_free_completion_tracker): Likewise.
4906 (maybe_add_completion_enum): New enum.
4907 (maybe_add_completion): New declaration.
4908 (throw_max_completions_reached_error): Likewise.
4909 * completer.c (max_completions): New global variable.
4910 (new_completion_tracker): New function.
4911 (free_completion_tracker): Likewise.
4912 (make_cleanup_free_completion_tracker): Likewise.
4913 (maybe_add_completions): Likewise.
4914 (throw_max_completions_reached_error): Likewise.
4915 (complete_line): Remove duplicates and limit result to max_completions
4917 (get_max_completions_reached_message): New function.
4918 (gdb_display_match_list): Handle max_completions.
4919 (_initialize_completer): New declaration and function.
4920 * symtab.c: Include completer.h.
4921 (completion_tracker): New static variable.
4922 (completion_list_add_name): Call maybe_add_completion.
4923 (default_make_symbol_completion_list_break_on_1): Renamed from
4924 default_make_symbol_completion_list_break_on. Maintain
4925 completion_tracker across calls to completion_list_add_name.
4926 (default_make_symbol_completion_list_break_on): New function.
4927 * top.c (init_main): Set rl_completion_display_matches_hook.
4928 * tui/tui-io.c: Include completer.h.
4929 (tui_old_rl_display_matches_hook): New static global.
4930 (tui_rl_display_match_list): Notify user if max-completions reached.
4931 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
4932 * NEWS (New Options): Mention set/show max-completions.
4934 2015-01-31 Gary Benson <gbenson@redhat.com>
4936 * symtab.c (struct add_name_data) <code>: New field.
4938 (add_symtab_completions): New function.
4939 (symtab_expansion_callback): Likewise.
4940 (default_make_symbol_completion_list_break_on): Set datum.code.
4941 Move minimal symbol scan before calling expand_symtabs_matching.
4942 Scan known primary symtabs for externs and statics before calling
4943 expand_symtabs_matching. Pass symtab_expansion_callback as
4944 expansion_notify argument to expand_symtabs_matching. Do not scan
4945 primary symtabs for externs and statics after calling
4946 expand_symtabs_matching.
4948 2015-01-31 Gary Benson <gbenson@redhat.com>
4950 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
4951 (struct quick_symbol_functions) <expand_symtabs_matching>:
4952 New argument expansion_notify. All uses updated.
4953 (expand_symtabs_matching): New argument expansion_notify.
4955 * symfile-debug.c (debug_qf_expand_symtabs_matching):
4956 Also print expansion notify.
4957 * symtab.c (expand_symtabs_matching_via_partial): Call
4958 expansion_notify whenever a partial symbol table is expanded.
4959 * dwarf2read.c (dw2_expand_symtabs_matching): Call
4960 expansion_notify whenever a symbol table is instantiated.
4962 2015-01-31 Doug Evans <xdje42@gmail.com>
4964 * cli-out.c: #include completer.h, readline/readline.h.
4965 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
4966 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
4967 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
4968 * cli-out.h (cli_display_match_list): Declare.
4969 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
4970 (ELLIPSIS_LEN): Ditto.
4971 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
4972 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
4973 (gdb_fnprint, gdb_print_filename): Ditto.
4974 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
4975 (gdb_display_match_list): Ditto.
4976 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
4977 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
4978 (mld_beep_ftype, mld_read_key_ftype): Ditto.
4979 (match_list_displayer): New struct.
4980 (gdb_display_match_list): Declare.
4981 * top.c (init_main): Set rl_completion_display_matches_hook.
4982 * tui/tui-io.c: #include completer.h.
4983 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
4984 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
4985 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
4986 (tui_mld_getc, tui_mld_read_key): Ditto.
4987 (tui_rl_display_match_list): Rewrite.
4988 (tui_handle_resize_during_io): New arg for_completion. All callers
4991 2015-01-31 Doug Evans <xdje42@gmail.com>
4993 Add symbol lookup cache.
4994 * NEWS: Document new options and commands.
4995 * symtab.c (symbol_cache_key): New static global.
4996 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
4997 (SYMBOL_LOOKUP_FAILED): New macro.
4998 (symbol_cache_slot_state): New enum.
4999 (block_symbol_cache): New struct.
5000 (symbol_cache): New struct.
5001 (new_symbol_cache_size, symbol_cache_size): New static globals.
5002 (hash_symbol_entry, eq_symbol_entry): New functions.
5003 (symbol_cache_byte_size, resize_symbol_cache): New functions.
5004 (make_symbol_cache, free_symbol_cache): New functions.
5005 (get_symbol_cache, symbol_cache_cleanup): New function.
5006 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
5007 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
5008 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
5009 (symbol_cache_flush, symbol_cache_dump): New functions.
5010 (maintenance_print_symbol_cache): New function.
5011 (maintenance_flush_symbol_cache): New function.
5012 (symbol_cache_stats): New function.
5013 (maintenance_print_symbol_cache_statistics): New function.
5014 (symtab_new_objfile_observer): New function.
5015 (symtab_free_objfile_observer): New function.
5016 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
5017 (_initialize_symtab): Init symbol_cache_key. New parameter
5018 maint symbol-cache-size. New maint commands print symbol-cache,
5019 print symbol-cache-statistics, flush-symbol-cache.
5020 Install new_objfile, free_objfile observers.
5022 2015-01-31 Joel Brobecker <brobecker@adacore.com>
5025 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
5028 2015-01-31 Doug Evans <xdje42@gmail.com>
5030 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
5031 * auto-load.c: #include ctype.h.
5032 (struct auto_load_pspace_info): Replace member loaded_scripts with
5033 new members loaded_script_files, loaded_script_texts.
5034 (auto_load_pspace_data_cleanup): Update.
5035 (init_loaded_scripts_info): Update.
5036 (get_auto_load_pspace_data_for_loading): Update.
5037 (maybe_add_script_file): Renamed from maybe_add_script. All callers
5039 (maybe_add_script_text): New function.
5040 (clear_section_scripts): Update.
5041 (source_script_file, execute_script_contents): New functions.
5042 (source_section_scripts): Add support for
5043 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
5044 (print_scripts): New function.
5045 (auto_load_info_scripts): Also print inlined scripts.
5046 (maybe_print_unsupported_script_warning): Renamed from
5047 unsupported_script_warning_print. All callers updated.
5048 (maybe_print_script_not_found_warning): Renamed from
5049 script_not_found_warning_print. All callers updated.
5050 * extension-priv.h (struct extension_language_script_ops): New member
5051 objfile_script_executor.
5052 * extension.c (ext_lang_objfile_script_executor): New function.
5053 * extension.h (objfile_script_executor_func): New typedef.
5054 (ext_lang_objfile_script_executor): Declare.
5055 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
5056 * guile/guile.c (guile_extension_script_ops): Update.
5057 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
5058 * python/python.c (python_extension_script_ops): Update.
5059 (gdbpy_execute_objfile_script): New function.
5061 2015-01-31 Eli Zaretskii <eliz@gnu.org>
5063 * tui/tui-io.c (tui_expand_tabs): New function.
5064 (tui_puts, tui_redisplay_readline): Expand TABs into the
5065 appropriate number of spaces.
5066 * tui/tui-regs.c: Include tui-io.h.
5067 (tui_register_format): Call tui_expand_tabs to expand TABs into
5068 the appropriate number of spaces.
5069 * tui/tui-io.h: Add prototype for tui_expand_tabs.
5071 2015-01-30 Doug Evans <dje@google.com>
5073 * NEWS: "info source" command now display producer string if present.
5074 * source.c (source_info): Print producer string if present.
5076 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5078 * varobj.c (varobj_delete): Fix comment.
5080 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5082 * varobj.c (create_child): Modify comment.
5084 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5086 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
5088 (ada_name_of_variable): Same.
5089 (ada_path_expr_of_child): Same.
5090 (ada_value_of_variable): Same.
5091 (ada_value_is_changeable_p): Same.
5092 (ada_value_has_mutated): Same.
5093 * c-varobj.c (varobj_is_anonymous_child): Same.
5094 (c_is_path_expr_parent): Same.
5095 (c_number_of_children): Same.
5096 (c_name_of_variable): Same.
5097 (c_path_expr_of_child): Same.
5099 (c_value_of_variable): Same.
5100 (cplus_number_of_children): Same.
5101 (cplus_name_of_variable): Same.
5102 (cplus_path_expr_of_child): Same.
5103 (cplus_value_of_variable): Same.
5104 * jv-varobj.c (java_number_of_children): Same.
5105 (java_name_of_variable): Same.
5106 (java_path_expr_of_child): Same.
5107 (java_value_of_variable): Same.
5108 * varobj.c (number_of_children): Same.
5109 (name_of_variable): Same.
5111 (varobj_ensure_python_env): Same.
5112 (varobj_get_objname): Same.
5113 (varobj_get_expression): Same.
5114 (varobj_get_display_format): Same.
5115 (varobj_get_display_hint): Same.
5116 (varobj_has_more): Same.
5117 (varobj_get_thread_id): Same.
5118 (varobj_get_frozen): Same.
5119 (dynamic_varobj_has_child_method): Same.
5120 (varobj_get_gdb_type): Same.
5121 (is_path_expr_parent): Same.
5122 (varobj_default_is_path_expr_parent): Same.
5123 (varobj_get_language): Same.
5124 (varobj_get_attributes): Same.
5125 (varobj_is_dynamic_p): Same.
5126 (varobj_get_child_range): Same.
5127 (varobj_value_has_mutated): Same.
5128 (varobj_get_value_type): Same.
5129 (number_of_children): Same.
5130 (name_of_variable): Same.
5131 (check_scope): Same.
5132 (varobj_editable_p): Same.
5133 (varobj_value_is_changeable_p): Same.
5134 (varobj_floating_p): Same.
5135 (varobj_default_value_is_changeable_p): Same.
5137 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5139 * varobj.c (varobj_get_path_expr): Set var->path_expr.
5140 * c-varobj.c (c_path_expr_of_child): Set local var instead of
5142 (cplus_path_expr_of_child): Same.
5144 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5146 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
5148 (mi_cmd_var_info_expression): Same.
5149 * varobj.c (varobj_get_expression): Mention in the comment that
5150 the result must by freed by the caller.
5152 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5154 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
5156 (varobj_update_one): Same.
5157 * varobj.c (update_type_if_necessary): Free curr_type_str and
5159 (varobj_get_type): Specify in comment that the result needs to be
5160 freed by the caller.
5162 2015-01-29 Doug Evans <dje@google.com>
5165 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
5167 2015-01-25 Mark Wielaard <mjw@redhat.com>
5169 * dwarf2read.c (checkproducer): Call producer_is_gcc.
5170 * utils.c (producer_is_gcc_ge_4): Likewise.
5171 (producer_is_gcc): New function.
5172 * utils.h (producer_is_gcc): New declaration.
5174 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5176 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
5178 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
5179 parameter by "addr_stack" parameter.
5180 (resolve_dynamic_range): Replace "addr" parameter by
5181 "stack_addr" parameter. Update function documentation.
5182 Update code accordingly.
5183 (resolve_dynamic_array, resolve_dynamic_union)
5184 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
5185 (resolve_dynamic_type): Update code, following the changes made
5186 to resolve_dynamic_type_internal's interface.
5187 * dwarf2loc.h (struct property_addr_info): New.
5188 (dwarf2_evaluate_property): Replace "address" parameter
5189 by "addr_stack" parameter. Adjust function documentation.
5190 (struct dwarf2_offset_baton): New.
5191 (struct dwarf2_property_baton): Update documentation of
5192 field "referenced_type" to be more general. New field
5193 "offset_info" in union data field.
5194 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
5195 parameter by "addr_stack" parameter. Adjust code accordingly.
5196 Add support for PROP_ADDR_OFFSET properties.
5197 * dwarf2read.c (attr_to_dynamic_prop): Add support for
5198 DW_AT_data_member_location attributes as well. Use case
5199 statements instead of if/else condition.
5201 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5203 * ada-varobj.c (ada_varobj_get_array_number_of_children):
5204 Return zero if PARENT_VALUE is NULL and parent_type's
5205 range type is dynamic.
5207 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5209 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
5210 nonzero if the type's subtype is dynamic.
5211 (resolve_dynamic_range): Also resolve the range's subtype.
5213 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
5215 Pushed by Joel Brobecker <brobecker@adacore.com>.
5216 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
5218 2015-01-27 Doug Evans <dje@google.com>
5220 * NEWS: Mention gdb.Objfile.username.
5221 * python/py-objfile.c (objfpy_get_username): New function.
5222 (objfile_getset): Add "username".
5224 2015-01-24 Mark Wielaard <mjw@redhat.com>
5226 * stack.c (return_command): Markup warning message with _.
5228 2015-01-24 Doug Evans <xdje42@gmail.com>
5230 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
5232 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5234 Fix 100x slowdown regression on DWZ files.
5235 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
5236 (struct line_header): Add offset and offset_in_dwz.
5237 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
5238 (free_line_header_voidp): New declaration.
5239 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
5241 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
5242 (handle_DW_AT_stmt_list): Use line_header_hash.
5243 (free_line_header_voidp): New function.
5244 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
5245 (dwarf_decode_lines): New parameter decode_mapping, use it.
5246 (dwarf2_free_objfile): Free line_header_hash.
5248 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
5251 * valops.c (value_rtti_indirect_type): Catch exception thrown by
5254 2015-01-15 Mark Wielaard <mjw@redhat.com>
5256 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
5258 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
5259 calling_convention an 8 bit bit field.
5260 (TYPE_NO_RETURN): New macro.
5261 * infcmd.c (finish_command): Query if function does not return
5263 * stack.c (return_command): Likewise.
5265 2015-01-23 Pedro Alves <palves@redhat.com>
5267 * linux-nat.c (linux_is_async_p): New macro.
5268 (linux_nat_is_async_p):
5269 (linux_nat_terminal_inferior): Check whether the target can async
5270 instead of whether it is already async.
5271 (linux_nat_terminal_ours): Don't check whether the target is
5273 (linux_async_pipe): Use linux_is_async_p.
5275 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5277 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
5279 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
5280 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
5281 Sort tp_array using tp_array_compar.
5282 (_initialize_thread): Extend thread_apply_all_command help.
5284 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5286 * corelow.c (core_open): Call also thread_command.
5287 * gdbthread.h (thread_command): New prototype moved from ...
5288 * thread.c (thread_command): ... here.
5289 (thread_command): Make it global.
5291 2015-01-22 Pedro Alves <palves@redhat.com>
5293 * configure.ac [*mingw32*]: Check $curses_found instead of
5295 * configure: Regenerate.
5296 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
5297 HAVE_NCURSES_NCURSES_H checks.
5299 2015-01-22 Eli Zaretskii <eliz@gnu.org>
5301 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
5302 fails with the 1st arg NULL, try again with "unknown". Don't test
5303 the "cup" capability: it isn't supported by the Windows port of
5304 ncurses, but the Windows console driver is still capable of
5307 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5309 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
5311 2015-01-22 Eli Zaretskii <eliz@gnu.org>
5313 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
5314 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
5315 reason that "make TAGS" is broken.
5317 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
5319 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
5320 and check additional store instructions.
5322 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
5324 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
5326 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
5328 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
5329 ppc_canonicalize_syscall, ppc_linux_syscall_record,
5330 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
5331 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5332 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
5333 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
5334 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
5335 ppc_process_record_op19, ppc_process_record_op31,
5336 ppc_process_record_op59, ppc_process_record_op60,
5337 ppc_process_record_op63): Likewise.
5339 2015-01-20 Joel Brobecker <brobecker@adacore.com>
5341 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
5342 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
5345 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
5347 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
5348 ppc_process_record_op31, ppc_process_record_op59,
5349 ppc_process_record_op60, ppc_process_record_op63,
5350 ppc_process_record): Fix -Wformat warning.
5351 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
5352 Remove unused variables.
5354 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
5356 * MAINTAINERS (Write After Approval): Add "Chen Gang".
5358 2015-01-19 Eli Zaretskii <eliz@gnu.org>
5360 * configure.ac [*mingw32*]: Only add windows-termcap.o to
5361 CONFIG_OBS if not building with a curses library.
5362 * configure: Regenerate.
5364 * windows-termcap.c: Include defs.h. Make the whole body empty if
5365 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
5366 HAVE_NCURSES_NCURSES_H is defined.
5368 2015-01-19 Joel Brobecker <brobecker@adacore.com>
5370 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
5371 from end of line to start of next line.
5373 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5375 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
5376 Scan PLT stub backward for reverse debugging.
5377 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5379 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5380 Ulrich Weigand <uweigand@de.ibm.com>
5382 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
5384 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
5386 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
5387 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
5388 (ppc_linux_init_abi): Set process_record, process_record_signal.
5389 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
5390 ppc_linux_record_tdep to gdbarch_tdep.
5391 (ppc_process_record): New declaration.
5392 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
5393 ppc_process_record_op19, ppc_process_record_op31,
5394 ppc_process_record_op59, ppc_process_record_op60,
5395 ppc_process_record_op63, ppc_process_record): New functions.
5397 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5399 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
5400 rs6000_in_function_epilogue_frame_p and add an argument
5402 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
5403 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
5405 (rs6000_epilogue_frame_unwind): New.
5406 (rs6000_gdbarch_init): Append epilogue unwinder.
5408 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
5410 * nat/linux-personality.c: Replace "#ifndef
5411 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
5412 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
5415 2015-01-16 Eli Zaretskii <eliz@gnu.org>
5417 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
5419 (_initialize_tui_win) <border-kind, border-mode>:
5420 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
5421 (tui_set_tab_width_command): Fix the commentary.
5423 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
5425 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
5427 (tui_set_tab_width_command): Delete and recreate the source and
5428 the disassembly windows, to show the effect of the changed tab
5431 * tui/tui-data.h (LINE_PREFIX): Make shorter
5432 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
5433 "Thread NNNNN.XXXX" thread ID notation on Windows.
5435 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
5437 Fix gcc-5 compilation.
5438 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
5440 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
5442 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
5443 (linux-personality.o): New rule.
5444 * common/common-defs.h: Include <stdint.h>.
5445 * config/aarch64/linux.mh (NATDEPFILES): Include
5446 linux-personality.o.
5447 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
5448 * config/arm/linux.mh (NATDEPFILES): Likewise.
5449 * config/i386/linux64.mh (NATDEPFILES): Likewise.
5450 * config/i386/linux.mh (NATDEPFILES): Likewise.
5451 * config/ia64/linux.mh (NATDEPFILES): Likewise.
5452 * config/m32r/linux.mh (NATDEPFILES): Likewise.
5453 * config/m68k/linux.mh (NATDEPFILES): Likewise.
5454 * config/mips/linux.mh (NATDEPFILES): Likewise.
5455 * config/pa/linux.mh (NATDEPFILES): Likewise.
5456 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
5457 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
5458 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
5459 * config/s390/linux.mh (NATDEPFILES): Likewise.
5460 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
5461 * config/sparc/linux.mh (NATDEPFILES): Likewise.
5462 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
5463 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
5464 * defs.h: Remove #include <stdint.h> (moved to
5465 common/common-defs.h).
5466 * linux-nat.c: Include nat/linux-personality.h. Remove #include
5467 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
5468 nat/linux-personality.c).
5469 (linux_nat_create_inferior): Remove code to disable address space
5470 randomization (moved to nat/linux-personality.c). Create cleanup
5471 to disable address space randomization.
5472 * nat/linux-personality.c: New file.
5473 * nat/linux-personality.h: Likewise.
5475 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
5477 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
5478 common/posix-strerror.c.
5479 (posix-strerror.o): New rule.
5480 (mingw-strerror.o): Likewise.
5481 * common/common-utils.h (safe_strerror): Move prototype to here,
5483 * common/common.host: New file.
5484 * common/mingw-strerror.c: Likewise.
5485 * common/posix-strerror.c: Likewise.
5486 * configure: Regenerated.
5487 * configure.ac: Source common/common.host. Add variable
5488 common_host_obs to gdb_host_obs.
5489 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
5490 gdb/common/posix-strerror.c when warning about the use of
5492 * mingw-hdep.c (safe_strerror): Remove definition; move it to
5493 common/mingw-strerror.c.
5494 * posix-hdep.c (safe_strerror): Remove definition; move it to
5495 common/posix-hdep.c.
5496 * utils.h (safe_strerror): Remove prototype; move to
5497 common/common-utils.h.
5499 2015-01-15 Joel Brobecker <brobecker@adacore.com>
5503 2015-01-15 Joel Brobecker <brobecker@adacore.com>
5505 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
5506 ___XA type if the array has already been fixed.
5508 2015-01-14 Yao Qi <yao@codesourcery.com>
5510 * Makefile.in (ppc-linux.o): New rule.
5511 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
5512 * configure.ac: AC_CHECK_FUNCS(getauxval).
5513 * config.in: Re-generated.
5514 * configure: Re-generated.
5515 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
5517 * nat/ppc-linux.c: New file.
5518 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
5519 Call ppc64_64bit_inferior_p.
5521 2015-01-14 Yao Qi <yao@codesourcery.com>
5523 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
5525 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
5526 (PPC_FEATURE_HAS_DFP): Likewise.
5527 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
5528 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
5529 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
5530 Include "nat/ppc-linux.h".
5531 * nat/ppc-linux.h: New file.
5532 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
5534 2015-01-14 Pedro Alves <palves@redhat.com>
5537 * breakpoint.c: Include "interps.h".
5538 (bpstat_do_actions_1): Also check whether the interpreter is
5541 2015-01-14 Pedro Alves <palves@redhat.com>
5544 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
5545 reinstall if the interpreter is sync.
5547 2015-01-13 Doug Evans <dje@google.com>
5549 * objfiles.c (objfile_filename): New function.
5550 * objfiles.h (objfile_filename): Declare it.
5551 (objfile_name): Add function comment.
5552 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
5553 bfd file name (which may be realpath'd), and the original name.
5555 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5557 * NEWS: Create a new section for the next release branch.
5558 Rename the section of the current branch, now that it has
5561 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5563 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
5564 * version.in: Bump version to 7.9.50.DATE-cvs.
5566 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5568 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
5569 Remove trailing new-line in argument of call to warning.
5571 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5573 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
5574 new-line in argument of call to "warning".
5576 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5578 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
5579 in static block, then try searching for primitive types.
5581 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
5583 * top.h (gdb_add_history): Declare.
5584 * top.c (command_count): New variable.
5585 (gdb_add_history): New function.
5586 (gdb_safe_append_history): New static function.
5587 (quit_force): Call it.
5588 (command_line_input): Use gdb_add_history instead of
5590 * event-top.c (command_line_handler): Likewise.
5592 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
5595 * darwin-nat.c: Replace <machine/setjmp.h> #include by
5596 <setjmp.h> #include.
5598 2015-01-11 Doug Evans <xdje42@gmail.com>
5600 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
5602 2015-01-11 Doug Evans <xdje42@gmail.com>
5605 * NEWS: The "maint demangle" command is renamed as "demangle".
5606 * demangle.c: #include cli/cli-utils.h, language.h.
5607 (demangle_command): New function.
5608 (_initialize_demangle): Add new command "demangle".
5609 * maint.c (maintenance_demangle): Stub out.
5610 (_initialize_maint_cmds): Update help text for "maint demangle",
5611 and mark as deprecated.
5613 2015-01-11 Mark Kettenis <kettenis@gnu.org>
5615 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
5616 inferior_thread is a function.
5618 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
5620 * Makefile.in (.y.c): Don't munge yacc's #line
5623 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
5625 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
5626 to prompt for input.
5627 * tui/tui-hooks.c (tui_query_hook): Remove.
5628 (tui_install_hooks): Don't set deprecated_query_hook.
5629 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
5630 height calculation. Always update the command window's cur_line.
5632 2015-01-09 Pedro Alves <palves@redhat.com>
5634 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
5636 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
5638 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
5639 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
5641 (check_stopped_by_watchpoint): New function.
5642 (save_sigtrap): Reimplement.
5643 (linux_nat_stopped_by_watchpoint): Adjust.
5644 (linux_nat_lp_status_is_event): Delete.
5645 (stop_wait_callback): Only call save_sigtrap after storing the
5647 (status_callback): If the thread had been stopped for a breakpoint
5648 that has since been removed, discard the event and resume the LWP.
5649 (count_events_callback, select_event_lwp_callback): Use
5650 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
5651 (cancel_breakpoint): Rename to ...
5652 (check_stopped_by_breakpoint): ... this. Record whether the LWP
5653 stopped for a software breakpoint or hardware breakpoint.
5654 (select_event_lwp): Only give preference to the stepping LWP in
5655 all-stop mode. Adjust comments.
5656 (stop_and_resume_callback): Remove references to new_pending_p.
5657 (linux_nat_filter_event): Likewise. Leave exit events of the
5658 leader thread pending here. Handle signal short circuiting here.
5659 Only call save_sigtrap after storing the pending waitstatus.
5660 (linux_nat_wait_1): Remove 'retry' label. Remove references to
5661 new_pending. Don't handle leaving events the caller is not
5662 interested in pending here, nor handle signal short-circuiting
5663 here. Also give equal priority to all LWPs that have had events
5664 in non-stop mode. If reporting a software breakpoint event,
5665 unadjust the LWP's PC.
5666 * linux-nat.h (enum lwp_stop_reason): New.
5667 (struct lwp_info) <stop_pc>: New field.
5668 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
5669 (struct lwp_info) <stop_reason>: New field.
5670 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
5672 2015-01-09 Pedro Alves <palves@redhat.com>
5674 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
5675 Set the LWP's 'resumed' flag.
5677 2015-01-09 Pedro Alves <palves@redhat.com>
5679 * linux-nat.c (linux_resume_one_lwp): New function.
5680 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
5681 (linux_nat_resume): Use lwp_status_pending_p and
5682 linux_resume_one_lwp.
5683 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
5684 (linux_handle_extended_wait): Use linux_resume_one_lwp.
5685 (status_callback, running_callback): Use lwp_status_pending_p.
5686 (lwp_status_pending_p): New function.
5687 (stop_and_resume_callback): Use lwp_status_pending_p.
5688 (linux_nat_filter_event): Use linux_resume_one_lwp.
5689 (linux_nat_wait_1): Always use status_callback to look for an LWP
5690 with a pending status. Use linux_resume_one_lwp.
5691 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
5692 linux_resume_one_lwp.
5694 2015-01-09 Pedro Alves <palves@redhat.com>
5696 * breakpoint.c (bp_location_inserted_here_p): New function,
5697 factored out from ...
5698 (breakpoint_inserted_here_p): ... here. Use
5699 ALL_BP_LOCATIONS_AT_ADDR.
5700 (software_breakpoint_inserted_here_p): Use
5701 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
5703 2014-01-09 Pedro Alves <palves@redhat.com>
5705 Skip enabling event reporting if the kernel supports
5707 * linux-thread-db.c: Include "nat/linux-ptrace.h".
5708 (thread_db_use_events): New function.
5709 (try_thread_db_load_1): Check thread_db_use_events before enabling
5711 (update_thread_state): New function.
5712 (attach_thread): Use it. Check thread_db_use_events before
5713 enabling event reporting.
5714 (thread_db_detach): Check thread_db_use_events before disabling
5716 (find_new_threads_callback): Check thread_db_use_events before
5717 enabling event reporting. Update the thread's state if not using
5718 libthread_db events.
5720 2015-01-09 Pedro Alves <palves@redhat.com>
5722 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
5723 about to wait for is > 0.
5724 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
5725 the kernel thread ID is -1.
5727 2015-01-09 Pedro Alves <palves@redhat.com>
5729 * linux-nat.c (attach_proc_task_lwp_callback): New function.
5730 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
5731 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
5732 ptrace option flags.
5733 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
5735 * nat/linux-procfs.c: Include <dirent.h>.
5736 (linux_proc_get_int): New parameter "warn". Handle it.
5737 (linux_proc_get_tgid): Adjust.
5738 (linux_proc_get_tracerpid): Rename to ...
5739 (linux_proc_get_tracerpid_nowarn): ... this.
5740 (linux_proc_pid_get_state): New function, factored out from
5741 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
5743 (linux_proc_pid_is_gone): New function.
5744 (linux_proc_pid_is_stopped): Adjust.
5745 (linux_proc_pid_is_zombie_maybe_warn)
5746 (linux_proc_pid_is_zombie_nowarn): New functions.
5747 (linux_proc_pid_is_zombie): Use
5748 linux_proc_pid_is_zombie_maybe_warn.
5749 (linux_proc_attach_tgid_threads): New function.
5750 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
5751 (linux_proc_get_tracerpid): Rename to ...
5752 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
5753 (linux_proc_pid_is_gone): New declaration.
5754 (linux_proc_pid_is_zombie): Update comment.
5755 (linux_proc_pid_is_zombie_nowarn): New declaration.
5756 (linux_proc_attach_lwp_func): New typedef.
5757 (linux_proc_attach_tgid_threads): New declaration.
5758 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
5759 use nowarn functions.
5760 (linux_ptrace_attach_fail_reason_string): Move here from
5761 gdbserver/linux-low.c and rename.
5762 (ptrace_supports_feature): If the current ptrace options are not
5763 known yet, check them now, instead of asserting.
5764 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
5767 2015-01-09 Pedro Alves <palves@redhat.com>
5769 * linux-thread-db.c (thread_db_find_new_threads_silently)
5770 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
5771 (find_new_threads_once): Print debug output on gdb_stdlog.
5773 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
5774 Pedro Alves <palves@redhat.com>
5776 * compile/compile.c: Include "gdb_wait.h".
5777 (do_rmdir): Check return value, and free 'zap'.
5779 2015-01-08 Pedro Alves <palves@redhat.com>
5780 Yao Qi <yao@codesourcery.com>
5782 * dwarf2loc.c (indirect_pieced_value): Don't call
5783 gdb_sign_extend. Call extract_signed_integer instead.
5784 * utils.c (gdb_sign_extend): Remove.
5785 * utils.h (gdb_sign_extend): Remove declaration.
5787 2015-01-07 Pierre Muller <muller@sourceware.org>
5790 * stabsread.c (define_symbol): Set language for C++ special symbols.
5792 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
5794 * inflow.c (initial_gdb_ttystate): Tweak comment.
5796 2015-01-07 Joel Brobecker <brobecker@adacore.com>
5798 * inflow.c (set_initial_gdb_ttystate): Add empty line after
5799 comment documenting function.
5801 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
5803 * terminal.h (set_initial_gdb_ttystate): Declare.
5804 * inflow.c (initial_gdb_ttystate): New static variable.
5805 (set_initial_gdb_ttystate): New setter.
5806 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
5807 instead of our current terminal state.
5808 * top.c (gdb_init): Call set_initial_gdb_ttystate.
5810 2015-01-07 Joel Brobecker <brobecker@adacore.com>
5812 * guile/scm-type.c (tyscm_array_1): Add comment.
5813 * python/py-type.c (typy_array_1): Add comment.
5815 2015-01-06 Joel Brobecker <brobecker@adacore.com>
5817 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
5818 error if N2 is equal to N1 - 1.
5820 2015-01-06 Joel Brobecker <brobecker@adacore.com>
5822 * python/py-type.c (typy_array_1): Do not raise negative-length
5823 exception if N2 is equal to N1 - 1.
5825 2015-01-03 Doug Evans <xdje42@gmail.com>
5827 * c-exp.y: Whitespace cleanup.
5828 (classify_inner_name): Remove extra ;.
5830 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
5832 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
5835 2015-01-02 Doug Evans <dje@google.com>
5837 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
5839 2015-01-02 Doug Evans <dje@google.com>
5841 * symtab.h (struct symbol): Fix typo in comment.
5843 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5845 Update year range in copyright notice of all files.
5847 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5849 * top.c (print_gdb_version): Update copyright year to 2015.
5851 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5853 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
5855 For older changes see ChangeLog-2014.
5861 version-control: never