gdb/

[binutils-gdb.git] / gdb / ChangeLog

2011-03-18  Pedro Alves  <pedro@codesourcery.com>

        * findvar.c (value_of_register): Mark the value as unavailable, if
        the register is unavailable.
        * frame.h (frame_register_unwind): New `unavailablep' parameter.
        (frame_register): New `unavailablep' parameter.
        (frame_register_read): Update comment.
        * frame.c (frame_register_unwind): New `unavailablep' parameter.
        Set it if the register is unavailable.  If the register is
        unavailable, clear the output buffer.
        (frame_register): New `unavailablep' parameter.  Pass it down.
        (frame_unwind_register): Adjust.
        (put_frame_register): Adjust.
        (frame_register_read): Adjust.  Also return false if the register
        is not available.
        (frame_register_unwind_location): Adjust.
        * sentinel-frame.c (sentinel_frame_prev_register): If the register
        is unavailable, mark the value accordingly.
        * stack.c (frame_info): Handle unavailable registers.

2011-03-18  Pedro Alves  <pedro@codesourcery.com>

        * mi/mi-main.c (register_changed_p): Handle REG_UNAVAILABLE, and
        simplify, using regcache_cooked_read.

2011-03-18  Pedro Alves  <pedro@codesourcery.com>

        * regcache.h (regcache_raw_read, regcache_raw_read_signed)
        (regcache_raw_read_unsigned, regcache_raw_read_signed)
        (regcache_raw_read_unsigned, regcache_raw_read_part)
        (regcache_cooked_read, regcache_cooked_read_signed)
        (regcache_cooked_read_unsigned, regcache_cooked_read_part)
        (regcache_cooked_read_ftype): Change return to enum
        register_status.
        * regcache.c: Include exceptions.h
        (regcache_save): Adjust to handle REG_UNAVAILABLE registers.
        (do_cooked_read): Change return to enum register_status.  Always
        forward to regcache_cooked_read.
        (regcache_raw_read): Change return to enum register_status.  If
        the register is not REG_VALID, memset the buffer.  Return the
        register's status.
        (regcache_raw_read_signed): Handle non-REG_VALID registers and
        return the register's status.
        (regcache_raw_read_unsigned): Ditto.
        (regcache_cooked_read): Change return to enum register_status.
        Assert that with read-only regcaches, the register's status must
        be known.  If the regcache is read-only, and the register is not
        REG_VALID, memset the buffer.  Return the register's status.
        (regcache_cooked_read_signed): Change return to enum
        register_status.  Handle non-REG_VALID registers and return the
        register's status.
        (regcache_cooked_read_unsigned): Change return to enum
        register_status.  Handle non-REG_VALID registers and return the
        register's status.
        (regcache_xfer_part, regcache_raw_read_part)
        (regcache_cooked_read_part): Change return to enum
        register_status.  Return the register's status.
        (regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is
        unavailable.
        (regcache_dump): Handle unavailable cooked registers.
        * frame.c (do_frame_register_read): Adjust interface to match
        regcache_cooked_read_ftype.
        * gdbarch.sh (pseudo_register_read): Change return to enum
        register_status.
        * gdbarch.h, gdbarch.c: Regenerate.

        * i386-tdep.h (i386_pseudo_register_read): Change return to enum
        register_status.
        * i386-tdep.c (i386_pseudo_register_read): Change return to enum
        register_status.  If reading a raw register indicates the raw
        register is not valid, return the raw register's status,
        otherwise, return REG_VALID.
        * amd64-tdep.c (amd64_pseudo_register_read): Change return to enum
        register_status.  Handle non-REG_VALID raw registers and return
        the register's status.
        * arm-tdep.c (arm_neon_quad_read)
        (arm_pseudo_read): Change return to enum register_status.  Handle
        non-REG_VALID raw registers and return the register's status.
        * avr-tdep.c (avr_pseudo_register_read): Ditto.
        * frv-tdep.c (frv_pseudo_register_read): Ditto.
        * h8300-tdep.c (h8300_pseudo_register_read): Ditto.
        * hppa-tdep.c (hppa_pseudo_register_read): Ditto.
        * m32c-tdep.c (m32c_move_reg_t): Change return to enum
        register_status.
        (m32c_raw_read, m32c_raw_write, m32c_banked_read)
        (m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read)
        (m32c_part_write, m32c_cat_read, m32c_cat_write)
        (m32c_r3r2r1r0_read, m32c_r3r2r1r0_write)
        (m32c_pseudo_register_read): Change return to enum
        register_status.  Adjust.
        * m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to
        enum register_status.  Return the register's status.
        * mep-tdep.c (mep_pseudo_cr32_read): Change return to enum
        register_status.  Return the register's status.
        (mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto.
        * mips-tdep.c (mips_pseudo_register_read): Ditto.
        * mt-tdep.c (mt_pseudo_register_read): Ditto.
        * rs6000-tdep.c (move_ev_register_func): New typedef.
        (e500_move_ev_register): Use it.  Change return to enum
        register_status.  Return the register's status.
        (do_regcache_raw_read): New function.
        (do_regcache_raw_write): New function.
        (e500_pseudo_register_read): Change return to enum
        register_status.  Return the register's status.  Use
        do_regcache_raw_read.
        (e500_pseudo_register_write): Adjust.  Use do_regcache_raw_write.
        (dfp_pseudo_register_read): Change return to enum register_status.
        Return the register's status.
        (vsx_pseudo_register_read): Ditto.
        (efpr_pseudo_register_read): Ditto.
        (rs6000_pseudo_register_read): Ditto.
        * s390-tdep.c (s390_pseudo_register_read): Change return to enum
        register_status.  Return the register's status.
        * sh64-tdep.c (pseudo_register_read_portions): New function.
        (sh64_pseudo_register_read): Change return to enum
        register_status.  Use pseudo_register_read_portions.  Return the
        register's status.
        * ia64-tdep.c (ia64_pseudo_register_read): Change return to enum
        register_status.  Return the register's status.
        * sh-tdep.c (pseudo_register_read_portions): New function.
        (sh_pseudo_register_read): Change return to enum register_status.
        Use pseudo_register_read_portions.  Return the register's status.
        * sparc-tdep.c (sparc32_pseudo_register_read): Change return to
        enum register_status.  Return the register's status.
        * sparc64-tdep.c (sparc64_pseudo_register_read): Ditto.
        * spu-tdep.c (spu_pseudo_register_read_spu)
        (spu_pseudo_register_read): Ditto.
        * xtensa-tdep.c (xtensa_register_read_masked)
        (xtensa_pseudo_register_read): Ditto.
        * bfin-tdep.c (bfin_pseudo_register_read): Ditto.

2011-03-18  Pierre Muller  <muller@ics.u-strasbg.fr>

        * python/py-value.c (valpy_getitem): Fix formatting of error function
        call.

2011-03-18  Pierre Muller  <muller@ics.u-strasbg.fr>

        ARI fixes: Add missing internationalization markups throughout
        C source files.
        * darwin-nat-info.c: Ditto.
        * record.c: Ditto.
        * remote.c: Ditto.
        * mi/mi-main.c: Ditto.

2011-03-18  Pierre Muller  <muller@ics.u-strasbg.fr>

        ARI fixes: Add missing internationalization markups throughout
        yacc files.
        * c-exp.y: Ditto.
        * cp-name-parser.y: Ditto.
        * f-exp.y: Ditto.
        * m2-exp.y: Ditto.
        * objc-exp.y: Ditto.
        * p-exp.y: Ditto.

2011-03-18  Pierre Muller  <muller@ics.u-strasbg.fr>

        ARI fixes: Messages should have no trailing new lines.
        * darwin-nat.c (mach_check_error): Remove trailing new line from
        warning function call message.
        * record.c (bfdcore_read): Idem for error call.

2011-03-18  Pierre Muller  <muller@ics.u-strasbg.fr>

        * common/signals.c (target_signal_from_host): Add _ markup to error
        function call message.
        (target_signal_to_host): Add _ markup and remove trailing new line
        from warning call message.
        (target_signal_from_command): Add _ markup to error function call
        message.

2011-03-18  Phil Muldoon  <pmuldoon@redhat.com>

        PR python/12149

        * python/python.c (gdbpy_write): Accept a stream argument and
        operate to the appropriate stream.
        (gdbpy_flush): Likewise.
        (_initialize_python): Add stream constants.
        (finish_python_initialization): Add GdbOutputErrorFile class.

2011-03-18  Kwok Cheung Yeung  <kcy@codesourcery.com>

        * MAINTAINERS: Add myself as a write-after-approval maintainer.

2011-03-18  Kwok Cheung Yeung  <kcy@codesourcery.com>

        * amd64-tdep.c (amd64_relocate_instruction): Fix ordering of arguments
        to store_signed_integer.  Add debug message when relocating CALL
        instructions.  Fix formatting of debug message.
        * i386-tdep.c (i386_relocate_instruction): Ditto.

2011-03-17  Joel Brobecker  <brobecker@gnat.com>

        * target.h (struct target_ops): Remove to_lookup_symbol field.
        (target_lookup_symbol): Delete macro.
        * target.c (nosymbol, debug_to_lookup_symbol): Delete.
        (update_current_target, setup_target_debug): Remove handling
        of to_lookup_symbol target_ops field.
        * ada-tasks.c (get_known_tasks_addr): Remove use of
        target_lookup_symbol.
        * coffread.c (coff_symtab_read): Likewise.
        * dbxread.c (read_dbx_symtab): Ditto.

2011-03-17  Joel Brobecker  <brobecker@gnat.com>

        PR gdb/12116:
        * configure.ac: Add getthrds declaration check.
        * configure, config.in: Regenerate.
        * aix-thread.c (getthrds): Declare only if not already declared
        in procinfo.h.  More declaration out of get_signaled_thread to
        global scope.

2011-03-17  Phil Muldoon  <pmuldoon@redhat.com>

        * python/py-symtab.c: Populate symtab_object_methods,
        sal_object_methods.
        (stpy_is_valid): New function.
        (salpy_is_valid): Ditto.
        * python/py-symbol.c: Declare symbol_object_methods.  Populate.
        (sympy_is_valid): New function.
        * python/py-objfile.c: Declare objfile_object_methods.  Populate.
        (objfpy_is_valid): New function.
        * python/py-inferior.c: Populate inferior_object_methods.
        (infpy_is_valid): New function.
        * python/py-infthread.c: Populate thread_object_methods.
        (thpy_is_valid): New function.
        * python/py-block.c: Declare block_object_methods.  Populate.  Declare
        block_iterator_object_methods.  Populate.
        (blpy_is_valid): New function.
        (blpy_iter_is_valid): Ditto.

2011-03-16  Keith Seitz  <keiths@redhat.com>

        * linespec.c (find_methods): Canonicalize NAME before looking
        up the symbol.
        (name_end): New function.
        (keep_name_info): New function.
        (decode_line_1): Use keep_name_info.
        (decode_compound): Likewise.
        * cli/cli-utils.h (remove_trailing_whitespace): New function.
        * cli/cli-utils.c (remove_trailing_whitespace): Likewise.

        PR c++/12273
        * linespec.c (locate_first_half): Keep overload information, too.
        (decode_compound): Use a string to represent break characters
        to escape the loop.
        If P points to a break character, do not increment it.
        For C++ and Java, keep overload information and relevant keywords.
        If we cannot find a symbol, search the minimal symbols.

        PR c++/11734
        * linespec.c (decode_compound): Rename SAVED_ARG to
        THE_REAL_SAVED_ARG.
        Make a copy of THE_REAL_SAVED_ARG in SAVED_ARG and strip
        single-quotes.
        Pass a valid block to lookup_symbol.
        (lookup_prefix_sym): Likewise.
        (find_method): Construct search name based on SYM_CLASS instead
        of SAVED_ARG.
        * psymtab.c (lookup_partial_symbol): Add language parameter.
        (lookup_symbol_aux_psymtabs): Likewise.
        Don't assume that the psymtab we found was the right one. Search
        for the desired symbol in the symtab to be certain.
        (psymtab_search_name): New function.
        (lookup_partial_symbol): Use psymtab_search_name.
        Add language parameter.
        (read_symtabs_for_function): Add language parameter and pass to
        lookup_partial_symbol.
        (find_symbol_file_from_partial): Likewise.

2011-03-16  Paul Pluzhnikov  <ppluzhnikov@google.com>

        PR gdb/12528
        * dwarf2read.c (noop_record_line): New function.
        (dwarf_decode_lines): Ignore line tables for GCd functions.

2011-03-16  Pierre Muller  <muller@ics.u-strasbg.fr>

        Fix ARI warnings about new lines at the end of messages, which
        are unneeded as there is a new line added at the end of the message
        automatically.
        * darwin-nat.c (darwin_stop_inferior): Ditto.
        * dec-thread.c (dec_thread_get_ada_task_ptid): Ditto.
        * dfp.c (decimal_to_number): Ditto.
        * exec.c (print_section_info): Ditto.
        * i386-darwin-nat.c (darwin_set_sstep): Ditto.
        * osdata.c (get_osdata): Ditto.
        * record.c (bfdcore_write): Ditto.
        * remote-mips.c (mips_readchar): Ditto.
        * remote.c (read_ptid): Ditto.
        * ser-mingw.c (ser_windows_raw): Ditto.
        * tracepoint.c (add_local_symbols): Ditto.
        * windows-nat.c (fake_create_process): Ditto.

2011-03-16  Tom Tromey  <tromey@redhat.com>

        * tracepoint.c (stop_tracing): Don't declare.
        * event-top.c (after_char_processing_hook): Add `(void)'.

2011-03-16  Phil Muldoon  <pmuldoon@redhat.com>

        * NEWS: Add Parameter sub-classing description.

2011-03-16  Kai Tietz  <ktietz@redhat.com>

        * MAINTAINERS: Update my e-mail address.

2011-03-15  Andreas Tobler  <andreast@fgznet.ch>

        * MAINTAINERS: Add myself for write after approval privileges.

2011-03-15  Michael Snyder  <msnyder@vmware.com>

        * frame.c (find_frame_sal): Assert sym is not null.

        * dbxread.c (process_one_symbol): Assert 'name' is not null.

        * objc-lang.c (selectors_info): Check strchr for null result.

        * stabsread.c (define_symbol): Guard against bad stabstring input.

2011-03-15  Pierre Muller  <muller@ics.u-strasbg.fr>

        Remove trailing spaces and tabulations from pascal language
        support sources.
        p-exp.y: Ditto.
        p-lang.c: Ditto.
        p-lang.h: Ditto.
        p-valprint.c: Ditto.

2011-03-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * dwarf2read.c (dwarf2_get_pc_bounds): Require HIGH strictly higher
        than LOW.  Comment it.
        (read_partial_die): Call complaint for inappropriate zero LOWPC or
        HIGHPC not strictly higher than LOWPC.

2011-03-15  Pierre Muller  <muller@ics.u-strasbg.fr>

        Fix formatting of function declarations returning a pointer in
        previous commit.
        * varobj.c (varobj_add_child): Ditto.
        * hppa-tdep.h (hppa_init_objfile_priv_data): Ditto.
        * inferior.h (get_displaced_step_closure_by_addr): Ditto.

2011-03-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support
        for the "generic" vector ABI used with GCC 4.3 and later.
        (ppc64_sysv_abi_return_value): Likewise.

2011-03-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * infcall.c (call_function_by_hand): Function return value is
        always a non_lval, even when using struct_return.

2011-03-15  Pedro Alves  <pedro@codesourcery.com>

        * printcmd.c (ALL_DISPLAYS_SAFE): New.
        (map_display_numbers): New.
        (do_delete_display): New.
        (undisplay_command): Use map_display_numbers.
        (do_enable_disable_display): New.
        (enable_disable_display_command): New function.
        (enable_display): Delete.
        (enable_display_command): New.
        (disable_display_command): Reimplement.
        (_initialize_printcmd): Adjust "enable display" command to use
        `enable_display_command' as callback.

2011-03-14  Phil Muldoon  <pmuldoon@redhat.com>

        * NEWS: Add Python breakpoint 'stop' operation.

2011-03-14  Phil Muldoon  <pmuldoon@redhat.com>

        * NEWS: Delete duplicate entry. Fix typo.

2011-03-14  Pierre Muller  <muller@ics.u-strasbg.fr>

        Fix ARI warning about function names in first column.
        Put prototype declaration on same line as return type.
        * objc-exp.y: Ditto.
        * p-exp.y: Ditto.
        * python/py-stopevent.h: Ditto.
        For long function names, split parameters to
        allow function name on same line as return type.
        * solib-pa64.c: Ditto.
        * varobj.c: Ditto.
        * varobj.h: Ditto.
        For long function declaration, use single line.
        * hppa-tdep.h: Ditto.
        * inferior.h: Ditto.

2011-03-14  Phil Muldoon  <pmuldoon@redhat.com>

        * python/python.h: Declare gdbpy_should_stop and
        gdbpy_breakpoint_has_py_cond.
        * python/python.c: Add python.h to includes.  Remove python.h from
        HAVE_PYTHON definition
        (gdbpy_should_stop): New dummy function.
        (gdbpy_breakpoint_has_py_cond): New dummy function.
        * python/py-breakpoint.c (bppy_init): Rewrite to allow
        sub-classing capabilities.
        (gdbpy_should_stop): New function.
        (gdbpy_breakpoint_has_py_cond): New function.
        (local_setattro): New function.
        * breakpoint.c (condition_command): Add check for Python 'stop'
        operation.
        (bpstat_check_breakpoint_conditions): Execute Python 'stop'
        operation function as part of stop/continue tests.

2011-03-14  Tom Tromey  <tromey@redhat.com>

        PR gdb/12576:
        * dwarf2loc.c (dwarf_expr_dwarf_call): Remove 'return'.
        (needs_frame_dwarf_call): Likewise.

2011-03-14  Pierre Muller  <muller@ics.u-strasbg.fr>

        Fix ARI warning about functions without parameters that do not
        use (void).
        * breakpoint.c (all_tracepoints): Replace () by (void).
        * f-exp.y (match_string_literal): Ditto.
        (yylex): Ditto.
        * m2-exp.y (yylex): Ditto.
        * mep-tdep.c (current_me_module): Ditto.
        (current_options): Ditto.
        (current_cop_data_bus_width): Ditto.
        (current_cr_names): Ditto.
        (current_cr_is_float): Ditto.
        (current_ccr_names): Ditto.
        * objc-exp.y (yylex): Ditto.
        * p-exp.y (yylex): Ditto.
        * remote.c (send_interrupt_sequence): Ditto.
        * tracepoint.c (current_trace_status): Ditto.
        * python/py-evts.c (gdbpy_initialize_py_events): Ditto.
        * python/py-prettyprint.c (push_dummy_python_frame): Ditto.

2011-03-11  Michael Snyder  <msnyder@vmware.com>

        * cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define.
        * cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS.
        (lookup_cmd): Test for CMD_LIST_AMBIGUOUS.
        * completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS.
        * top.c (set_verbose): Use CMD_LIST_AMBIGUOUS.

        * event-loop-c (delete_async_signal_handler): Assert prev_ptr.
        (delete_async_event_handler): Ditto.

        * python/py-breakpoint.c (bppy_set_condition): Stop memory leak.

        * python/py-breakpoint.c (bppy_get_commands): Fix memory leak.

        * top.c (set_verbose): Assert showcmd was found.

2011-03-11  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.c (warning_once): Correct style issues.

2011-03-11  Yao Qi  <yao@codesourcery.com>

        * arm-tdep.c (copy_ldr_str_ldrb_strb): Remove redundant statements.

2011-03-11  Andreas Schwab  <schwab@redhat.com>

        * common/aclocal.m4: Remove.

2011-03-10  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.c (windowing_enabled): Remove inline attribute.
        (xtensa_write_register, xtensa_read_register): Likewise.
        (xtensa_hextochar): Removed.
        (xtensa_init_reggroups): Replace xtensa_hextochar () by explicit code.

2011-03-10  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.c (xtensa_c0reg_t): Update comments.
        (xtensa_call0_frame_cache_t): Update comments.  New fields added.
        (xtensa_alloc_frame_cache): Add initialization for new fields.
        (xtensa_frame_cache): Change the way how call0_frame_cache () is called.
        (warning_once): New function.
        (xtensa_insn_kind): New item c0opc_and.
        (call0_classify_opcode): Add the case for AND instruction.
        (call0_track_op): Change arguments.  New local variable litbase.
        Add the case to handle c0opc_and.  Update algorithms for c0opc_mov,
        c0opc_l32r, c0opc_s32i to take into account dynamic stack adjustments
        in the prologue.
        Add cases for c0opc_l32e, c0opc_s32e, c0opc_rfwo, c0opc_rfwu.
        (call0_analyze_prologue): Update the comments.  Change arguments.
        Add the variety of updates to handle extended prologues, which now can
        conduct dynamic stack adjustments.
        (call0_frame_cache): Likewise.
        (xtensa_skip_prologue): Update call0_analyze_prologue () function call.
        (xtensa_gdbarch_init): Initialize xtensa_session_once_reported.

2011-03-10  Michael Snyder  <msnyder@vmware.com>

        * tracepoint.c (cmd_qtv): Discard unused value 'packet'.
        (cmd_qtframe): Ditto.
        (cmd_qtbuffer): Ditto.
        (cmd_bigqtbuffer): Ditto.

2011-03-10  Tom Tromey  <tromey@redhat.com>

        * tracepoint.c (trace_actions_command): Update.
        * thread.c (thread_apply_command): Update.
        * reverse.c (delete_bookmark_command): Update.
        (bookmarks_info): Update.
        * printcmd.c (undisplay_command): Update.
        * memattr.c (mem_enable_command): Update.
        (mem_disable_command): Update.
        (mem_delete_command): Update.
        * inferior.c (detach_inferior_command): Update.
        (kill_inferior_command): Update.
        (remove_inferior_command): Update.
        * cli/cli-utils.h (struct get_number_or_range_state): New.
        (init_number_or_range): Declare.
        (get_number_or_range): Update.
        * cli/cli-utils.c (init_number_or_range): New function.
        (get_number_or_range): Change 'pp' parameter to 'state'.  Remove
        static variables.
        (number_is_in_list): Update.
        * breakpoint.h (get_tracepoint_by_number): Update.
        * breakpoint.c (map_breakpoint_numbers): Update for change to
        get_number_or_range.
        (find_location_by_number): Use get_number, not
        get_number_or_range.
        (trace_pass_set_count): New function.
        (trace_pass_command): Update for change to get_number_or_range.
        Rework loop logic.
        (get_tracepoint_by_number): Remove 'multi_p' parameter; add
        'state' parameter.

2011-03-10  Phil Muldoon  <pmuldoon@redhat.com>

        * python/py-param.c (add_setshow_generic): Add set/show callback
        parameters.  Register Python object context.
        (get_show_value): New function.
        (get_set_value): New function.
        (call_doc_function): New function.
        (get_doc_string): Move behind get_show_value/get_set_value.

2011-03-10  Andreas Tobler  <andreast-list@fgznet.ch>

        * fbsd-nat.c (fbsd_make_corefile_notes): Constify local `fname'.

2011-03-09  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.c (xtensa_read_register): Add comment.
        (xtensa_write_register): Likewise.
        (xtensa_hextochar): Add comment and update to match coding conventions.
        (xtensa_frame_cache, xtensa_return_value): Follow coding conventions.
        (execute_l32e, execute_s32e, execute_code): Update comments.
        (xtensa_exception_handler_t): Update to match coding conventions.
        (xtensa_insn_kind): Likewise.

2011-03-09  Michael Snyder  <msnyder@vmware.com>

        * mi-cmd-disas.c (mi_cmd_disassemble): Fix memory leak.

2011-03-09  Pedro Alves  <pedro@codesourcery.com>

        * nto-tdep.c (nto_find_and_open_solib): Constify local `base'.

2011-03-09  Tom Tromey  <tromey@redhat.com>

        * thread.c (restore_selected_frame): Handle frame_level == -1.
        (make_cleanup_restore_current_thread): Use
        get_selected_frame_if_set.
        * frame.h (get_selected_frame_if_set): Declare.
        * frame.c (get_selected_frame_if_set): New function.

2011-03-09  Pedro Alves  <pedro@codesourcery.com>

        * cli/cli-cmds.c (shell_escape): Use lbasename.
        * coffread.c (coff_start_symtab): Constify parameter.
        (complete_symtab): Constify `name' parameter.
        (coff_symtab_read): Constify `filestring' local.
        (coff_getfilename): Constify return and `result' local.
        Use lbasename.
        * fbsd-nat.c (fbsd_make_corefile_notes): Use lbasename.
        * linux-fork.c (info_checkpoints_command): Use lbasename.
        * linux-nat.c (linux_nat_make_corefile_notes): Use lbasename.
        * minsyms.c (lookup_minimal_symbol): Use lbasename.
        * nto-tdep.c (nto_find_and_open_solib): Use lbasename.
        * procfs.c (procfs_make_note_section): Use lbasename.
        * tui/tui-io.c (printable_part): Constity return and parameter.
        Use lbasename.
        (print_filename): Constify parameters, and local `s'.
        (tui_rl_display_match_list): Constify local `temp'.

2011-03-09  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Revert:
        2011-03-08  Jan Kratochvil  <jan.kratochvil@redhat.com>
        Fix DWARF-3+ DW_AT_accessibility default assumption.
        * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
        cu->header.version >= 3.

2011-03-09  Yao Qi  <yao@codesourcery.com>

        * common/Makefile.in: Remove.
        * common/configure: Remove.
        * common/configure.ac: Remove.

2011-03-09  Yao Qi  <yao@codesourcery.com>

        Revert:
        2011-02-11  Yao Qi  <yao@codesourcery.com>

        * common/Makefile.in: Add copyright header.

        2011-02-11  Yao Qi  <yao@codesourcery.com>

        * Makefile.in: Remove signals.o from COMMON_OBS.  Link
        libcommon.a.
        * configure.ac: Add common to sub dir.
        * configure: Regenerate.

2011-03-08  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.c (call0_ret): New function.
        (xtensa_skip_prologue): Speed up analysis.

2011-03-08  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.c (xtensa_register_reggroup_p): Count in all registers
        while executing MI command -data-list-changed-registers.

2011-03-08  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.c (xtensa_read_register): New function.
        (xtensa_write_register): New function.
        (xtensa_find_register_by_name): New function.
        (xtensa_windowed_frame_cache): Update comments in type description.
        (xtensa_frame_cache): Likewise.
        (xtensa_window_interrupt_insn): New function.
        (xtensa_frame_cache): Add analysis for Xtensa Window Exception frames.
        (xtensa_insn_kind): Add new instructions.
        (rwx_special_register): New function.
        (call0_classify_opcode): Add new instructions to the analysis.
        (a0_saved, a7_saved, a11_saved): New variables.
        (a0_was_saved, a7_was_saved, a11_was_saved): New variables.
        (execute_l32e): New function.
        (execute_s32e): New function.
        (xtensa_exception_handler_t): New type.
        (execute_code): New function.
        (xtensa_window_interrupt_frame_cache): New function to conduct frame
        analysis for Xtensa Window Exception handlers.

2011-03-08  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.c (TX_PS): New.
        (windowing_enabled): Update to count for Call0 ABI.
        (xtensa_hextochar): New.
        (xtensa_init_reggroups): Make algorithm generic.
        (xtensa_frame_cache): Use TX_PS on Tiny Xtensa.

2011-03-08  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.h (XTENSA_MAX_COPROCESSOR): Update.

2011-03-08  Michael Snyder  <msnyder@vmware.com>

        * i386-tdep.c (i386_follow_jump): Check return value of
        target_read_memory.
        (i386_analyze_struct_return): Ditto.
        (i386_skip_probe): Ditto.
        (i386_match_insn): Ditto.
        (i386_skip_noop): Ditto.
        (i386_analyze_frame_setup): Ditto.
        (i386_analyze_register_saves): Ditto.
        (i386_skip_prologue): Ditto.
        (i386_skip_main_prologue): Ditto.

        * target.c (read_whatever_is_readable): Fix memory leak.

        * i386-tdep.c (i386_process_record): Document fall through.

2011-03-08  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix DWARF-3+ DW_AT_accessibility default assumption.
        * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
        cu->header.version >= 3.

2011-03-08  Pedro Alves  <pedro@codesourcery.com>

        * remote.c (remote_check_symbols): Skip if the target has no
        execution.

2011-03-08  Joel Brobecker  <brobecker@adacore.com>

        * target.c (read_whatever_is_readable): Reformat comment,
        with a minor typo fix. Minor reformatting of the code.

2011-03-08  Yao Qi  <yao@codesourcery.com>

        * arm-tdep.c: Remove prototype declaration displaced_in_arm_mode.
        (displaced_read_reg): Add `dsc' parameter, remove `from' parameter.
        Use cached result instead of calling displaced_in_arm_mode again.
        (branch_write_pc, alu_write_pc, load_write_pc): Add `dsc' parameter.
        (displaced_write_reg, copy_preload, copy_preload_reg): Callers update.
        (cleanup_copro_load_store, copy_copro_load_store): Likewise.
        (cleanup_branch, copy_bx_blx_reg, copy_alu_imm): Likewise.
        (cleanup_alu_reg, copy_alu_reg, cleanup_alu_shifted_reg): Likewise.
        (copy_alu_shifted_reg, cleanup_load, cleanup_store): Likewise.
        (copy_extra_ld_st, copy_ldr_str_ldrb_strb): Likewise.
        (cleanup_block_load_all, cleanup_block_store_pc): Likewise.
        (cleanup_block_load_pc, copy_block_xfer): Likewise.
        * arm-linux-tdep.c (arm_linux_copy_svc): Callers update.
        (arm_catch_kernel_helper_return): Likewise.
        * gdb/arm-tdep.h : Update function declarations.

2011-03-07  Michael Snyder  <msnyder@vmware.com>

        * dwarf2loc.c (indirect_pieced_value): Assert 'piece' not null.

        * ser-unix.c (hardwire_get_tty_state): Stop memory leak.

        * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Free environment.

        * elfread.c (elf_symtab_read): Stop memory leak.

        * main.c (captured_main): Fix memory leak.

2011-03-07  Andreas Schwab  <schwab@linux-m68k.org>

        * ada-lang.c (compare_names): Call is_name_suffix with string1
        instead of string2.

2011-03-07  Tom Tromey  <tromey@redhat.com>

        * xcoffread.c (xcoff_sym_fns): Update.
        * symfile.h (struct sym_fns) <sym_read_psymbols>: New field.
        (enum symfile_add_flags) <SYMFILE_NO_READ>: New constant.
        * symfile.c (syms_from_objfile): Handle SYMFILE_NO_READ.
        (symbol_file_add_with_addrs_or_offsets): Likewise.
        (reread_symbols): Handle OBJF_PSYMTABS_READ.
        * somread.c (som_sym_fns): Update.
        * psymtab.h (require_partial_symbols): Declare.
        * psymtab.c (require_partial_symbols): New function.
        (ALL_OBJFILE_PSYMTABS_REQUIRED): New macro.
        (ALL_OBJFILE_PSYMTABS): Undef.
        (ALL_PSYMTABS): Move from psympriv.h.
        (lookup_partial_symtab, find_pc_sect_psymtab)
        (lookup_symbol_aux_psymtabs, relocate_psymtabs)
        (find_last_source_symtab_from_partial)
        (forget_cached_source_info_partial)
        (print_psymtab_stats_for_objfile, read_symtabs_for_function)
        (expand_partial_symbol_tables, read_psymtabs_with_filename)
        (map_symbol_names_psymtab, map_symbol_filenames_psymtab)
        (find_symbol_file_from_partial, map_matching_symbols_psymtab)
        (expand_symtabs_matching_via_partial, maintenance_info_psymtabs):
        Use ALL_OBJFILE_PSYMTABS_REQUIRED.
        * psympriv.h (ALL_PSYMTABS): Move to psymtab.c.
        * objfiles.h (OBJF_PSYMTABS_READ): New macro.
        * objfiles.c (objfile_has_partial_symbols): Handle lazily-read
        psymtabs.
        * mipsread.c (ecoff_sym_fns): Update.
        * machoread.c (macho_sym_fns): Update.
        * elfread.c (elf_symfile_read): Set up for lazy psymtab reading.
        (read_psyms): New function.
        (elf_sym_fns, elf_sym_fns_gdb_index): Update.
        (elf_sym_fns_lazy_psyms): New global.
        * dwarf2read.c (dwarf2_initialize_objfile): Don't call
        dwarf2_build_psymtabs.
        * dbxread.c (aout_sym_fns): Update.
        * coffread.c (coff_sym_fns): Update.

2011-03-07  Tom Tromey  <tromey@redhat.com>

        * infrun.c (print_exited_reason): Include inferior id and pid in
        message.

2011-03-07  Tom Tromey  <tromey@redhat.com>

        * target.h (struct target_ops) <to_has_execution>: Add ptid_t
        parameter.
        (target_has_execution_1): Update.
        (target_has_execution_current): Declare.
        (target_has_execution): Call target_has_execution_current.
        (default_child_has_execution): Update.
        * target.c (default_child_has_execution): Add 'the_ptid'
        parameter.
        (target_has_execution_1): Likewise.
        (target_has_execution_current): New function.
        (add_target): Update.
        (init_dummy_target): Update.
        * remote-m32r-sdi.c (m32r_has_execution): New function.
        (init_m32r_ops): Use it.
        * record.c (record_core_has_execution): Now static.  Add
        'the_ptid' parameter.
        * inferior.c (have_live_inferiors): Don't save current thread.
        Use target_has_execution_1.

2011-03-07  Yao Qi  <yao@codesourcery.com>

        * Makefile.in (aclocal_m4_deps): Remove gnulib/m4/memcmp.m4.

2011-03-07  Joel Brobecker  <brobecker@adacore.com>

        * elfread.c (elf_symtab_read): Minor reformatting.

2011-03-07  Joel Brobecker  <brobecker@adacore.com>

        * objc-lang.c (selectors_info): Minor reformatting.

2011-03-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (compare_names): Add FALLTHROUGH comment.

2011-03-07  Joel Brobecker  <brobecker@adacore.com>
            Michael Snyder  <msnyder@vmware.com>

        * ada-valprint.c (ada_val_print_array): Move the declaration of
        "byte_order" and "elttype" inside the block where these variables
        are actually used.  Remove some special handling for the case
        where "elttype" and "eltlen" are null.  Replace by a comment
        and a couple of assertion checks.

2011-03-05  Michael Snyder  <msnyder@vmware.com>

        * source.c (add_path): Replace semicolon at end of block.
        * dwarf2expr.c (execute_stack_op): Ditto.

2011-03-05  Mike Frysinger  <vapier@gentoo.org>

        * bfin-tdep.c: Include sim-regno.h and gdb/sim-bfin.h.
        * configure.tgt (bfin-*-*linux*): Define gdb_sim.
        (bfin-*-*): Likewise.

2011-03-05  Michael Snyder  <msnyder@vmware.com>

        * dwarf2expr.c (execute_stack_op): Delete superfluous semicolon.
        * mdebugread.c (parse_symbol): Ditto.
        * parse.c (parse_exp_in_context): Ditto.
        * source.c (add_path): Ditto.
        * utils.c (gnu_debuglink_crc32): Ditto.
        * varobj.c (variable_language): Ditto.

        * linux-tdep.c (linux_get_siginfo_type): Stop memory leak.

2011-03-04  Michael Snyder  <msnyder@vmware.com>

        * linux-fork.c (inferior_call_waitptid): Fix copy/paste error.

        * symfile.c (simple_overlay_update): Check for null return value
        from lookup_minimal_symbol.

        * xml-syscall.c (syscall_start_syscall): Assert name is non null.

2011-03-04  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * eval.c (parse_and_eval_address_1): Remove function.
        * linespec.c (decode_indirect): Call parse_to_comma_and_eval
        instead of parse_and_eval_address_1.
        * value.h (parse_and_eval_address_1): Remove prototype.

2011-03-04  Michael Snyder  <msnyder@vmware.com>

        * remote.c (putpkt_binary): Document that case stmt falls through.

2011-03-04  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * breakpointc (print_it_typical): Move NULL check from here...
        (print_bp_stop_message): ... to here.

2011-03-04  Michael Snyder  <msnyder@msnyder-server.eng.vmware.com>

        * breakpoint.c (enable_command): Use break instead of continue,
        and fill in a missing break.
        (disable_command): Ditto.

2011-03-04  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * inflow.c (terminal_init_inferior_with_pgrp): Copy ttystate.
        (terminal_save_ours): Remove misleading comment.
        (inflow_inferior_data_cleanup): Free ttystate.
        (inflow_inferior_exit): Likewise.
        (copy_terminal_info): Copy ttystate.

        * serial.c (serial_copy_tty_state): New function.
        * serial.h (serial_copy_tty_state): Add prototype.
        (struct serial_ops): Add copy_tty_state callback.
        * ser-base.c (ser_base_copy_tty_state): New function.
        * ser-base.h (ser_base_copy_tty_state): Add prototype.
        * ser-go32.c (dos_copy_tty_state): New function.
        (dos_ops): Install copy_tty_state callback.
        * ser-mingw.c (_initialize_ser_windows): Likewise.
        * ser-pipe.c (_initialize_ser_pipe): Likewise.
        * ser-unix.c (hardwire_copy_tty_state): New function.
        (_initialize_ser_hardwire): Install it.

2011-03-04  Michael Snyder  <msnyder@vmware.com>

        * breakpoint.c (create_breakpoint): Add missing break statement.

        Reverting this patch:
        * infcall.c (call_function_by_hand): Add break statements for lint.

        Reverting this patch:
        * cli/cli-script.c (script_from_file): Add break for lint.

2011-03-04  Michael Snyder  <msnyder@vmware.com>

        * solib.c (reload_shared_libraries_1): Close memory leak.

2011-03-03  Tom Tromey  <tromey@redhat.com>

        PR gdb/12538:
        * dwarf2read.c (process_psymtab_comp_unit): Handle case where
        DW_STRING is NULL.

2011-03-03  Michael Snyder  <msnyder@vmware.com>

        * remote-fileio.c (remote_fileio_func_fstat): Initialize all
        fields of struct 'st' to zero.

        * tui/tui-winsource.c (tui_update_source_window_as_is): Initialize
        sal.pspace before calling set_current_source_symtab_and_line.

2011-03-03  Yao Qi  <yao@codesourcery.com>

        * Makefile.in (configure-common): Remove.  Let Makefile
        in dir common to rebuild itself.
        (common/Makefile): Likewise.

2011-03-03  Joel Brobecker  <brobecker@adacore.com>

        * utils.c (parse_escape): Add i18n markup in error message.

2011-03-03  Yao Qi  <yao@codesourcery.com>

        * gdb/arm-tdep.c (shifted_reg_val): Replace magic number 15 with
        ARM_PC_REGNUM.
        (thumb_get_next_pc_raw, arm_get_next_pc_raw): Likewise.
        (displaced_write_reg, displaced_read_reg): Likewise.
        (copy_ldr_str_ldrb_strb, cleanup_block_load_all): Likewise.
        (cleanup_block_load_pc, copy_block_xfer): Likewise.
        (cleanup_branch): Replace magic number 14 and 15 with
        ARM_LR_REGNUM and ARM_PC_REGNUM respectively.

2011-03-02  Michael Snyder  <msnyder@vmware.com>

        * maint.c (maintenance_do_deprecate): No need to check for NULL.

        * cli/cli-script.c (script_from_file): Add break for lint.

        * mdebugread.c (parse_partial_symbols): Fix indent.

        * target-descriptions.c (tdesc_gdb_type): No need to call
        xstrdup, callee saves a copy.

        * printcmd.c (print_scalar_formatted): Use strncpy for safety.

        * infcall.c (call_function_by_hand): Add break statements for lint.

        * utils.c (parse_escape): Escape the escape char.

        * python/py-inferior.c (build_inferior_list): Error out if
        PyList_Append fails.
        (gdbpy_inferiors): Error out if build_inferior_list fails.

        * linux-nat.c (linux_nat_xfer_partial): Preserve errno around
        a function call.

        * record.c (record_restore): Move printf to before error return.

2011-03-02  Yao Qi  <yao@codesourcery.com>

        * arm-tdep.h (struct displaced_step_closure): Add two new fields
        is_thumb and insn_size.
        * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset
        on both ARM and Thumb mode.
        (arm_process_displaced_insn): Set is_thumb and insn_size.
        (arm_displaced_init_closure): Handle both 16-bit and 32-bit.
        (arm_displaced_step_fixup): Likewise.

2011-03-01  Michael Snyder  <msnyder@vmware.com>

        * cli/cli-dump.c (dump_bfd_file): Check error return and warn.

        * jv-lang.c (evaluate_subexp_java): Conditional can't be true.

        * dwarf2read.c (dwarf2_compute_name): NAME cannot be null here.

        * cli/cli-dump.c (restore_binary_file): Validate ftell return value.

        * ada-lang.c (ada_make_symbol_completion_list): Replace malloc
        with xmalloc.

        * ada-lang.c (aggregate_assign_others): Rename inner scope variable
        which shadows function parameter.

        * tracepoint.c (create_tsv_from_upload): Superfluous call
        to xstrdup.  Callee already calls xstrdup.

        * linespec.c (decode_line_1): Remove unnecessary null check.

        * tracepoint.c (scope_info): Fix mem leak, remove underused
        variable.

        * python/py-prettyprint.c (apply_val_pretty_printer): Remove
        superfluous null check.

        * std-regs.c (value_of_builtin_frame_pc_reg): Frame can't be null.
        (value_of_builtin_frame_fp_reg): Ditto.

        * event-top.c (display_gdb_prompt): Remove superfluous null check.

        * python/py-prettyprint.c (apply_val_pretty_printer): VAL may
        be null.

        * linespec.c (decode_line_1): Check for null before dereference.

        * reverse.c (record_restore): Move null-check to before pointer
        dereference.

        * python/py-utils.c (gdbpy_obj_to_string): Delete unused variable.

        * objc-lang.c (selectors_info): Add explanitory comment.
        (classes_info): Ditto.

2011-03-01  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define.
        (arm_linux_restart_syscall_init): Handle both on-stack and in-kernel
        versions of the trampoline.  Handle Thumb vs. ARM addresses.
        (arm_kernel_linux_restart_syscall_tramp_frame): New global.
        (arm_linux_init_abi): Install it.
        * arm-tdep.c (arm_psr_thumb_bit): Make global.
        * arm-tdep.c (arm_psr_thumb_bit): Add prototype.

2011-02-28  Michael Snyder  <msnyder@vmware.com>

        * ui-out.c (ui_out_field_core_addr): Make local char buffer
        a little bigger, to avoid possibility of an overflow.

        * breakpoint.c (breakpoint_adjustment_warning): Make local char
        buffers a little bigger, to avoid possibility of an overflow.

        * coffread.c (coff_getfilename): Add check to avoid overflow.

        * objc-lang.c (selectors_info): Add a small safety margin to
        avoid overflow.
        (classes_info): Error out on too long REGEXP.

        * infrun.c (handle_inferior_event): Remove unused function call.

        * fork-child.c (fork_inferior): Remove ifdef'd code and
        unused variable.

        * linux-thread-db.c (attach_thread): Discard unused value.

        * linux-nat.c (linux_handle_extended_wait): Delete unused variable.

        * remote.c (remote_get_noisy_reply): Discard unused value.
        (remote_vcont_resume): Ditto.
        (remote_stop_ns): Ditto.

        * linespec.c (decode_objc): Delete unused variable.

        * tui/tui-regs.c (tui_register_format): Delete unused variable.

        * dwarf2read.c (add_partial_symbol): Discard unused values.
        (read_base_type): Delete unused variable.

        * dbxread.c (read_dbx_symtab): Discard unused value.

        * eval.c (evaluate_subexp_standard): Delete unused variable,
        and discard unused values.

        * infcmd.c (_initialize_infcmd): Discard unused values.

        * stabsread.c (rs6000_builtin_type): Missing break statement.

        * dbxread.c (process_one_symbol): Discard unused value.

        * coffread.c (coff_end_symtab): Delete unused variable.

        * dwarf2read.c (dw2_get_file_names): Discard unused value.
        (dwarf2_add_typedef): Delete unused variable.
        (read_namespace): Ditto.
        (dwarf_decode_macros): Ditto.

        * m2-lang.c (evaluate_subexp_modula2): Discard unused variable.

        * opencl-lang.c (evaluate_subexp_opencl): Discard unused value.

        * p-valprint.c (pascal_val_print): Discard unused value.

        * utils.c (nquery): Call va_end before return;
        (yquery): Ditto.
        (query): Ditto.

        * proc-service.c (ps_plog): Call va_end before return.

2011-02-28  Tom Tromey  <tromey@redhat.com>

        * python/python.c (gdbpy_value_cst): New global.
        (_initialize_python): Initialize it.
        * python/python-internal.h (gdbpy_value_cst): Declare.
        * python/py-value.c (convert_value_from_python): Use
        gdbpy_value_cst.

2011-02-28  Michael Snyder  <msnyder@vmware.com>

        * python/py-cmd.c (cmdpy_init): Fix memory leak.

        * breakpoint.c (catch_syscall_completer): Free malloced list.

        * jv-lang.c (java_primitive_type_from_name): Add missing break.

        * opencl-lang.c (lval_func_check_validity): Rename inner variables.
        (lval_func_check_synthetic_pointer): Ditto.
        (lval_func_free_closure): Fix use-after-free.

2011-02-28  Tom Tromey  <tromey@redhat.com>

        * psymtab.c (expand_partial_symbol_tables): Use
        ALL_OBJFILE_PSYMTABS.

2011-02-28  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * objc-lang.c (selectors_info): Error on too long REGEXP.

2011-02-28  Michael Snyder  <msnyder@vmware.com>

        * python/py-param.c (set_parameter_value): Add missing
        break statement.

        * linux-record.c (record_linux_system_call): Add missing
        break statement.

2011-02-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * breakpoint.c (print_one_breakpoint_location): Remove unused
        argument PRINT_ADDRESS_BITS.  Update callers.
        (print_one_breakpoint): Likewise.

2011-02-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * breakpoint.c (wrap_indent_at_field): New function.
        (print_breakpoint_location): Use it instead of WRAP_INDENT argument.
        Allocate ui_stream locally instead of using STB argument.
        (print_one_breakpoint_location): Update call.
        * ui-out.c (ui_out_query_field): New function.
        * ui-out.h (ui_out_query_field): Add prototype.

2011-02-28  Joel Brobecker  <brobecker@adacore.com>

        From Michael Snyder  <msnyder@vmware.com>
        * ada-exp.y (write_object_renaming): Add FALLTHROUGH comment.

2011-02-27  Michael Snyder  <msnyder@vmware.com>

        * objc-lang.c (selectors_info): Prevent string overrun.

        * tui/tui-stack.c (tui_get_function_from_frame): Fix off by one
        error in strncpy.

        * symtab.c (rbreak_command): Move variable 'file_name' to
        outer scope.

        * d-valprint.c (dynamic_array_type): Avoid shadowing a function
        param with a local variable of the same name.

2011-02-27  Michael Snyder  <msnyder@vmware.com>

        * value.c (value_from_history_ref): New function.
        * value.h (value_from_history_ref): Export.
        * cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
        to parse value history references.
        * cli/cli-utils.h (get_number_trailer): Update comment.

2011-02-27  Michael Snyder  <msnyder@vmware.com>

        * inferior.c (detach_inferior_command): Use get_number_or_range.
        (kill_inferior_command): Ditto.
        (remove_inferior_command): Ditto.
        (initialize_inferiors): Make command names plural.
        Update help strings.

2011-02-27  Michael Snyder  <msnyder@vmware.com>

        * darwin-nat-info.c: Fix comment typo.
        * dwarf2expr.h: Ditto.
        * fbsd-nat.c: Ditto.
        * fbsd-nat.h: Ditto.
        * frame-unwind.h: Ditto.
        * frame.h: Ditto.
        * hppa-hpux-tdep.c: Ditto.
        * i386-linux-nat.c: Ditto.
        * linux-nat.c: Ditto.
        * nbsd-nat.c: Ditto.
        * nbsd-nat.h: Ditto.
        * ppc-linux-tdep.c: Ditto.
        * serial.c: Ditto.
        * ui-file.h: Ditto.
        * tui/tui-winsource.c: Ditto.

2011-02-26  Michael Snyder  <msnyder@vmware.com>

        * breakpoint.c (reattach_breakpoints): Avoid resource leak (ui_file).

        * maint.c (maintenance_do_deprecate): Plug a memory leak.

        * dwarf2loc.c (insert_bits): Avoid shadowing a function param
        with a local variable of the same name.

        * i387-tdep.c (i387_supply_fxsave): Avoid shadowing a function
        param with a local variable of the same name.
        (i387_supply_xsave): Ditto.

        * linux-low.c (linux_nat_xfer_osdata): Rename local variable so
        that it does not shadow a function parameter.

        * i386-nat.c (i386_length_and_rw_bits): Document that case
        statement is meant to fall through.

        * expprint.c (dump_subexp_body_standard): Document that case
        statement is meant to fall through.

        * amd64-linux-tdep.c (amd64_linux_syscall_record): Delete
        dead if statement.  Condition can't be false.

2011-02-25  Michael Snyder  <msnyder@vmware.com>

        * arm-tdep.c: Fix typos in comments.
        * bsd-uthread.c: Ditto.
        * completer.c: Ditto.
        * corelow.c: Ditto.
        * cp-namespace.c: Ditto.
        * cp-support.c: Ditto.
        * cris-tdep.c: Ditto.
        * dbxread.c: Ditto.
        * dwarf2read.c: Ditto.
        * frame.h: Ditto.
        * gdbtypes.h: Ditto.
        * inferior.h: Ditto.
        * mdebugread.c: Ditto.
        * mips-tdep.c: Ditto.
        * ppc-linux-nat.c: Ditto.
        * ppc-linux-tdep.c: Ditto.
        * printcmd.c: Ditto.
        * sol-thread.c: Ditto.
        * solib-frv.c: Ditto.
        * solist.h: Ditto.
        * sparc64-tdep.c: Ditto.
        * spu-tdep.c: Ditto.
        * stabsread.c: Ditto.
        * symfile.c: Ditto.
        * valops.c: Ditto.
        * varobj.c: Ditto.
        * vax-nat.c: Ditto.
        * python/py-block.c: Ditto.
        * python/py-symbol.c: Ditto.
        * python/py-symtab.c: Ditto.
        * python/py-value.c: Ditto.
        * tui/tui-win.c: Ditto.

2011-02-25  Michael Snyder  <msnyder@vmware.com>

        * inferior.c (print_inferior): Accept a string instead of an int
        for requested_inferiors, and use get_number_or_range to parse it.
        (info_inferiors_command): Pass args string to print_inferior.
        (initialize_inferiors): Change help string for info inferiors.
        * inferior.h (print_inferior): Export prototype change.

2011-02-25  Tom Tromey  <tromey@redhat.com>

        * common/ax.def (invalid2): Set to 0x31.

2011-02-25  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * dwarf2loc.c (disassemble_dwarf_expression) <DW_OP_breg[0-9]+>: Use
        L and plongest.
        (disassemble_dwarf_expression) <DW_OP_bregx>: Drop variable offset,
        use L and plongest.
        (disassemble_dwarf_expression) <DW_OP_fbreg>: Use L and plongest.

2011-02-24  Michael Snyder  <msnyder@vmware.com>

        * Makefile.in (clean): Make clean should remove generated files
        observer.h and observer.inc.

2011-02-24  Joel Brobecker  <brobecker@adacore.com>

        Revert the following patch (not approved yet):
        2011-02-21  Hui Zhu  <teawater@gmail.com>
        * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
        * ax-gdb.c (gen_printf_expr_callback): New function.
        * ax-gdb.h (gen_printf_expr_callback): Forward declare.
        * ax-general.c (ax_memcpy): New function.
        (ax_print): Handle "printf".
        (ax_reqs): Ditto.
        * ax.h (ax_memcpy): Forward declare.
        * common/ax.def (invalid2): Removed.
        (printf): New entry.
        * printcmd.c (printcmd.h): New include.
        (string_printf): New function.
        (ui_printf): Removed.
        (printf_command): Remove static.  Call string_printf.
        (eval_command): Call string_printf.
        * printcmd.h: New file.
        * tracepoint.c (validate_actionline,
        encode_actions_1): handle printf_command.

2011-02-23  Tom Tromey  <tromey@redhat.com>

        * ax-general.c (ax_pick): Add missing newline.

2011-02-23  Michael Snyder  <msnyder@vmware.com>

        * breakpoint.c (breakpoint_1): Change first argument from an int
        to a char pointer, so that the function now accepts a list of
        breakpoints rather than just one.  Use new function
        'number_is_in_list' to implement.
        (breakpoints_info): Pass char * instead of int to breakpoint_1.
        (watchpoints_info): Ditto.
        (tracepoints_info): Ditto.
        (maintenance_info_breakpoints): Ditto.
        (_initialize_breakpoint): Update help strings to reflect the fact
        that these functions can now take more than one argument.
        * cli/cli-utils.c (number_is_in_list): New function.
        * cli/cli-utils.h (number_is_in_list): Export.

2011-02-23  Michael Snyder  <msnyder@vmware.com>

        * memattr.c (mem_enable_command): Use get_number_or_range.
        (mem_disable_command): Ditto.
        (mem_delete_command): Ditto.
        (_initialize_mem): Tweak usage message to reflect multiple
        arguments.

2011-02-22  Doug Evans  <dje@google.com>

        Add gdb.lookup_global_symbol python function.
        * NEWS: Add entry.
        * python/py-symbol.c (gdbpy_lookup_global_symbol): New function.
        * python/python-internal.h (gdbpy_lookup_global_symbol): Declare it.
        * python/python.c (GdbMethods): Add entry for lookup_global_symbol.

2011-02-22  Tom Tromey  <tromey@redhat.com>

        * language.c (language_class_name_from_physname): Rename
        'curr_language' argument to 'lang'; use in body.

2011-02-22  Michael Snyder  <msnyder@vmware.com>

        * cli/cli-utils.c (number_is_in_list): Check for zero return.

2011-02-22  Pedro Alves  <pedro@codesourcery.com>

        * frame-unwind.h: Fix comment to mention the this frame, not the
        next.

2011-02-22  Tom Tromey  <tromey@redhat.com>

        * symfile.c (auto_solib_limit): Remove.
        * symfile.h (auto_solib_limit): Remove.

2011-02-22  Joel Brobecker  <brobecker@adacore.com>

        * Makefile.in (INSTALLED_LIBS): Delete.  Update comment.

2011-02-21  Michael Snyder  <msnyder@vmware.com>

        * gdbthread.h (print_thread_info): Change prototype.
        * thread.c (print_thread_info): Accept char* instead of int for
        requested_threads argument.  Use new function number_is_in_list
        to determine which threads to list.
        (info_threads_command): Pass char* to print_thread_info.
        * cli/cli-utils.c (number_is_in_list): New function.
        * cli/cli-utils.h (number_is_in_list): Export.
        * mi/mi-main.c (mi_cmd_thread_info): Pass char* to
        print_thread_info.
        (print_one_inferior): Ditto.
        (mi_cmd_list_thread_groups): Ditto.

2011-02-21  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * common/Makefile.in (CFLAGS): New.
        (COMPILE): Add $(CFLAGS).

2011-02-21  Tom Tromey  <tromey@redhat.com>

        * breakpoint.c (catch_syscall_command_1): Fix typo.

2011-02-21  Tom Tromey  <tromey@redhat.com>

        * reverse.c: Include cli-utils.h.
        * printcmd.c: Include cli-utils.h.
        (string_printf): Use skip_spaces.
        * cli/cli-utils.h: New file.
        * cli/cli-utils.c: New file.
        * cli/cli-dump.h (skip_spaces): Move to cli-utils.h.
        * cli/cli-dump.c (skip_spaces): Move to cli-utils.c.
        * breakpoint.h (get_number, get_number_or_range): Move to
        cli-utils.h.
        * breakpoint.c: Include cli-utils.h.
        (get_number_trailer, get_number, get_number_or_range)
        (ep_skip_leading_whitespace): Move to cli-utils.c.
        (create_breakpoint_sal, find_condition_and_thread)
        (decode_static_tracepoint_spec, watch_command_1)
        (watch_maybe_just_location, ep_parse_optional_if_clause)
        (catch_fork_command_1, catch_exec_command_1)
        (catch_syscall_command_1): Use skip_spaces, skip_to_space.
        * Makefile.in (SUBDIR_CLI_OBS): Add cli-utils.o.
        (SUBDIR_CLI_SRCS): Add cli-utils.c.
        (HFILES_NO_SRCDIR): Add cli-utils.h.
        (cli-utils.o): New target.

2011-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>

        * remote.c (remote_close): Reset INFERIOR_PTID to NULL_PTID
        before calling discard_all_inferiors.

2011-02-21  Ulrich Weigand  <uweigand@de.ibm.com>

        * opencl-lang.c (STRUCT_OCL_TYPE): Remove.
        (struct builtin_opencl_type): Remove.
        (builtin_opencl_type): Change return type to "struct type **".
        (lookup_opencl_vector_type): Update caller.
        (opencl_language_arch_info): Copy primitive type vector from gdbarch.
        (build_opencl_types): Install plain array of "struct type *"
        instead of "struct builtin_opencl_type".

2011-02-21  Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
            Ulrich Weigand  <uweigand@de.ibm.com>

        * arm-linux-nat.c: Include "observer.h" and "gdbthread.h".
        (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define.
        (struct arm_linux_hwbp_cap): New type.
        (arm_linux_get_hwbp_cap): New function.
        (arm_linux_get_hw_breakpoint_count): Likewise.
        (arm_linux_get_hw_watchpoint_count): Likewise.
        (arm_linux_can_use_hw_breakpoint): Likewise.
        (arm_hwbp_type): New type.
        (arm_hwbp_control_t): Likewise.
        (struct arm_linux_hw_breakpoint): Likewise.
        (struct arm_linux_thread_points): Likewise.
        (arm_threads): New global variable.
        (arm_linux_find_breakpoints_by_tid): New function.
        (arm_hwbp_control_initialize): Likewise.
        (arm_hwbp_control_is_enabled): Likewise.
        (arm_hwbp_control_disable): Likewise.
        (arm_linux_hw_breakpoint_initialize): Likewise.
        (arm_linux_get_hwbp_type): Likewise.
        (arm_linux_hw_watchpoint_initialize): Likewise.
        (arm_linux_hw_breakpoint_equal): Likewise.
        (arm_linux_insert_hw_breakpoint1): Likewise.
        (arm_linux_remove_hw_breakpoint1): Likewise.
        (arm_linux_insert_hw_breakpoint): Likewise.
        (arm_linux_remove_hw_breakpoint): Likewise.
        (arm_linux_region_ok_for_hw_watchpoint): Likewise.
        (arm_linux_insert_watchpoint): Likewise.
        (arm_linux_remove_watchpoint): Likewise.
        (arm_linux_stopped_data_address): Likewise.
        (arm_linux_stopped_by_watchpoint): Likewise.
        (arm_linux_watchpoint_addr_within_range): Likewise.
        (arm_linux_new_thread): Likewise.
        (arm_linux_thread_exit): Likewise.
        (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint
        related target callbacks.  Register arm_linux_new_thread and
        arm_linux_thread_exit.
        * arm-tdep.h (arm_pc_is_thumb): Add prototype.
        * arm-tdep.c (arm_pc_is_thumb): Make global.
        (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint.

2011-02-21  Ulrich Weigand  <uweigand@de.ibm.com>

        * breakpoint.c (update_watchpoint): Do not attempt to recreate
        per-frame locations while within a function epilogue.

2011-02-21  Pierre Muller  <muller@ics.u-strasbg.fr>

        * ser-mingw.c (ser_windows_close): Reformat comment to better conform
        to GNU coding standards.

2011-02-21  Pierre Muller  <muller@ics.u-strasbg.fr>

        Allow use of mingw native on Windows 95 OS.
        * ser-mingw.c (CancelIo): New macro for dynamically loaded DLL entry.
        (ser_windows_close): Only call CancelIo if function exists.
        (_initialize_ser_windows): Use LoadLirary/GetProcAddress
        to check for existence of CancelIo function in kernel32 DLL.

2011-02-21  Hui Zhu  <teawater@gmail.com>

        * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
        * ax-gdb.c (gen_printf_expr_callback): New function.
        * ax-gdb.h (gen_printf_expr_callback): Forward declare.
        * ax-general.c (ax_memcpy): New function.
        (ax_print): Handle "printf".
        (ax_reqs): Ditto.
        * ax.h (ax_memcpy): Forward declare.
        * common/ax.def (invalid2): Removed.
        (printf): New entry.
        * printcmd.c (printcmd.h): New include.
        (string_printf): New function.
        (ui_printf): Removed.
        (printf_command): Remove static.  Call string_printf.
        (eval_command): Call string_printf.
        * printcmd.h: New file.
        * tracepoint.c (validate_actionline,
        encode_actions_1): handle printf_command.

2011-02-19  Michael Snyder  <msnyder@vmware.com>

        * reverse.c (delete_one_bookmark): Argument is now bookmark
        id rather than pointer to bookmark struct.
        (delete_bookmark_command): Use get_number_or_range.
        (goto_bookmark_command): Parse with get_number instead of strtoul.
        (bookmark_1): New function.  Print info for one bookmark.
        (bookmarks_info): Use get_number_or_range and bookmark_1.

2011-02-18  Michael Snyder  <msnyder@vmware.com>

        * thread.c (info_threads_command): Re-implement using
        get_number_or_range.
        (thread_apply_command): Ditto.

2011-02-18  Tom Tromey  <tromey@redhat.com>

        * common/ax.def: New file.
        * ax.h (enum agent_op): Use ax.def.
        * ax-general.c (aop_map): Use ax.def.

2011-02-18  Tom Tromey  <tromey@redhat.com>

        * ax-general.c (aop_map): Add pick and rot.
        * dwarf2loc.c (compile_dwarf_to_ax) <DW_OP_over>: Reimplement.
        <DW_OP_rot>: Implement.
        * ax.h (enum agent_op) <aop_pick, aop_rot>: New constants.
        (ax_pick): Declare.
        * ax-general.c (ax_pick): New function.

2011-02-18  Tom Tromey  <tromey@redhat.com>

        * Makefile.in (HFILES_NO_SRCDIR): Don't mention ada-operator.inc.

2011-02-18  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Tom Tromey  <tromey@redhat.com>

        * cp-support.c (make_symbol_overload_list_namespace): Do not call
        make_symbol_overload_list_block with NULL BLOCK.
        * valarith.c (unop_user_defined_p): Resolve also TYPE_CODE_TYPEDEF.

2011-02-18  Pedro Alves  <pedro@codesourcery.com>

        * breakpoint.c (get_number_trailer): No longer accept a NULL PP.
        * breakpoint.h (get_number_or_range): Declare.
        * printcmd.c (ALL_DISPLAYS): Declare.
        (delete_display): Reimplement taking a display pointer.
        (undisplay_command): Accept a range of displays to delete, using
        get_number_or_range.

2011-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>

        * c-valprint.c (c_val_print): Add embedded_offset to address
        for arrays of unspecified length.
        * p-valprint.c (pascal_val_print): Likewise.

2011-02-18  Yao Qi  <yao@codesourcery.com>

        * gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ...
        (arm_process_displaced_insn): .. here. Remove parameter INSN.
        (thumb_process_displaced_insn): New.
        * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update
        call to arm_process_displaced_insn.
        * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn.

2011-02-17  Tom Tromey  <tromey@redhat.com>

        * dwarf2loc.h (dwarf2_compile_expr_to_ax): Declare.
        * dwarf2loc.c (dwarf2_compile_expr_to_ax): Rename from
        compile_dwarf_to_ax.  No longer static.  Call
        dwarf2_compile_cfa_to_ax.
        (locexpr_tracepoint_var_ref): Update.
        (loclist_tracepoint_var_ref): Update.
        * dwarf2-frame.h (dwarf2_compile_cfa_to_ax): Declare.
        * dwarf2-frame.c (execute_cfa_program): Remove 'this_frame'
        argument; add 'gdbarch' and 'pc'.
        (dwarf2_compile_cfa_to_ax): New function.
        (dwarf2_frame_cache): Update.

2011-02-17  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_type_of_array): Fix the size of the array
        in the case of an unconstrained packed array.

2011-02-17  Yao Qi  <yao@codesourcery.com>

        * common/Makefile.in: Add more targets for make.

2011-02-16  Tom Tromey  <tromey@redhat.com>

        * dwarf2loc.c (unimplemented): Fix typo.

2011-02-16  Tom Tromey  <tromey@redhat.com>

        * dwarf2loc.c (unimplemented): Handle unnamed opcodes.
        (compile_dwarf_to_ax) <default>: Use unimplemented.
        <DW_OP_deref>: Update.
        (disassemble_dwarf_expression): Update.
        * dwarf2read.c (dwarf_stack_op_name): Remove 'def' argument.
        (decode_locdesc): Update.
        * dwarf2expr.h (dwarf_stack_op_name): Update.

2011-02-16  Tom Tromey  <tromey@redhat.com>

        * ax.h (struct aop_map) <name>: Now const.

2011-02-16  Tom Tromey  <tromey@redhat.com>

        * ax-gdb.c.c (gen_expr) <UNOP_MEMVAL>: Handle value kinds other
        than axs_rvalue.

2011-02-16  Yao Qi  <yao@codesourcery.com>

        * infrun.c (get_displaced_step_closure_by_addr): New.
        * inferior.h: Declare it.
        * arm-tdep.c: (arm_pc_is_thumb): Call
        get_displaced_step_closure_by_addr.  Adjust MEMADDR if it
        returns non-NULL.

2011-02-16  Pedro Alves  <pedro@codesourcery.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        gdb/
        * tracepoint.c (memrange_sortmerge): Fix list A's end calculation.

2011-02-16  Pedro Alves  <pedro@codesourcery.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        * value.c (value_contents_copy_raw): Extend describing comment.
        Assert that the destination contents we're overwriting are wholly
        available.
        (value_contents_copy): Extend describing comment.

2011-02-16  Pedro Alves  <pedro@codesourcery.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        * value.c (value_available_contents_eq): Remove redundant local
        variables.  Fix available contents comparision.
        * value.h (value_available_contents_eq): Extend describing
        comment.

2011-02-16  Yao Qi  <yao@codesourcery.com>

        * thread.c (info_threads_command): Add missing i18n markup and remove
        trailing newline.

2011-02-15  Paul Pluzhnikov  <ppluzhnikov@google.com>

        * breakpoint.c (longjmp_names): New variable.
        (struct breakpoint_objfile_data): New type.
        (breakpoint_objfile_key): New variable.
        (msym_not_found): New variable.
        (msym_not_found_p): New predicate.
        (get_breakpoint_objfile_data): New function.
        (create_overlay_event_breakpoint): Check per-objfile cache for
        symbols first.
        (create_longjmp_master_breakpoint): Likewise.
        (create_std_terminate_master_breakpoint): Likewise.
        (create_exception_master_breakpoint): Likewise.
        (_initialize_breakpoint): Register per-objfile data key.

2011-02-15  Paul Pluzhnikov  <ppluzhnikov@google.com>

        * breakpoint.c ((create_overlay_event_breakpoint): Const-propagate
        parameter value.
        (create_longjmp_master_breakpoint): Loop over longjmp names.
        (create_std_terminate_master_breakpoint): Const-propagate parameter
        value.
        (update_breakpoints_after_exec): Adjust.
        (breakpoint_re_set): Adjust.

2011-02-15  Michael Snyder  <msnyder@vmware.com>

        * thread.c (info_threads_command): Process arg as thread id,
        or list of thread ids.
        (thread_find_command): New command.
        (_initialize_thread): Document argument for info threads.
        Document 'thread find' command.
        * NEWS: Document new command "thread find".

2011-02-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * Makefile.in (ACLOCAL_AMFLAGS): Add `-I ../config'.
        * aclocal.m4: Regenerated with aclocal-1.11.1.
        * common/configure: Regenerate with autoconf-2.64.

2011-02-15  Ken Werner  <ken.werner@de.ibm.com>

        * opencl-lang.c (build_opencl_types): Set the size of the built-in
        bool data type to a size of one byte.

2011-02-15  Pedro Alves  <pedro@codesourcery.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        * target.c (memory_xfer_live_readonly_partial): Document where to
        look for interface description.

2011-02-15  Yao Qi  <yao@codesourcery.com>

        PR tdep/12352
        * arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in
        order to store PC value on stack instead of text section.

2011-02-15  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for
        the EFP register set size.
        (efpr_pseudo_register_read): Use regcache_raw_read_part to read
        data from the VMX register.
        (efpr_pseudo_register_write): Use regcache_raw_write_part to read
        and write data from/to the VMX register.

2011-02-14  Michael Snyder  <msnyder@vmware.com>

        * command.h (enum command_class): New class 'no_set_class', for
        "show" commands without a corresponding "set" command.
        * value.c (_initialize_values): Use 'no_set_class' for "show values".
        * copying.c (_initialize_copying): Ditto for "show copying" and
        "show warranty".
        * cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
        "show version".
        * cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
        which there is no corresponding "set" command (eg. "show copying").

2011-02-14  Pedro Alves  <pedro@codesourcery.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        * exec.c (section_table_available_memory): Change `len' parameter
        type to ULONGEST.
        * exec.h (section_table_available_memory): Ditto.
        * value.h (read_value_memory): Rename the `offset' parameter to
        `embedded_offset'.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        * memrange.c (compare_mem_ranges): Mention sort order in
        describing comment.
        (normalize_mem_ranges): Add comment.  Fix ra->length calculation.
        * tracepoint.c (traceframe_available_memory): Extend comment to
        mention what happens to RESULT when the target does not support
        the query.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        * value.c (mark_value_bytes_unavailable): Fix indexing the `bef'
        range.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * value.c (value_bits_valid, value_bits_synthetic_pointer):
        No longer handle NULL values.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * exceptions.h (NOT_AVAILABLE_ERROR): New error.
        * value.c: Include "exceptions.h".
        (require_available): Throw NOT_AVAILABLE_ERROR instead of a
        generic error.
        * cp-abi.c: Include gdb_assert.h.
        (baseclass_offset): Add `embedded_offset' and `val' parameters.
        Assert the method is implemented.  Wrap NOT_AVAILABLE_ERROR
        errors.
        * cp-abi.h (baseclass_offset): Add `embedded_offset' and `val'
        parameters.  No longer returns -1 on error.
        (struct cp_abi_ops) <baseclass_offset>: Add `embedded_offset' and
        `val' parameters.
        * cp-valprint.c: Include exceptions.h.
        (cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching
        the baseclass_offset.  Handle unavailable base classes.  Use
        val_print_invalid_address.
        * p-valprint.c: Include exceptions.h.
        (pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors
        when fetching the baseclass_offset.  No longer expect
        baseclass_offset returning -1.  Handle unavailable base classes.
        Use val_print_invalid_address.
        * valops.c (dynamic_cast_check_1): Rename `contents' parameter to
        `valaddr' parameter, and change its type to gdb_byte pointer.  Add
        `embedded_offset' and `val' parameters.  Adjust.
        (dynamic_cast_check_2): Rename `contents' parameter to `valaddr'
        parameter, and change its type to gdb_byte pointer.  Add
        `embedded_offset' and `val' parameters.  Adjust.  No longer expect
        baseclass_offset returning -1.
        (value_dynamic_cast): Use value_contents_for_printing rather than
        value_contents.  Adjust.
        (search_struct_field): No longer expect baseclass_offset returning
        -1.
        (search_struct_method): If reading memory from the target is
        necessary, wrap it in a new value to pass to baseclass_offset.  No
        longer expect baseclass_offset returning -1.
        (find_method_list): No longer expect baseclass_offset returning
        -1.  Use value_contents_for_printing rather than value_contents.
        * valprint.c (val_print_invalid_address): New function.
        * valprint.h (val_print_invalid_address): Declare.
        * gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset'
        and `val' parameters.  No longer expect baseclass_offset returning
        -1.  Adjust.
        * gnu-v2-abi.c: Include "exceptions.h".
        (gnuv2_baseclass_offset): Add `embedded_offset' and `val'
        parameters.  Handle unavailable memory.  Recurse through
        gnuv2_baseclass_offset directly, rather than through
        baseclass_offset.  No longer returns -1 on not found, instead
        throw an error.
        * gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and
        `val' parameters.  Adjust.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * tracepoint.c (memrange_sortmerge): Don't merge ranges that are
        almost but not quite adjacent.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * value.h (value_entirely_available): Declare.
        * value.c (value_entirely_available): New function.
        * c-valprint.c (c_value_print): Don't try fetching the pointer's
        real type if the pointer is unavailable.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * valops.c (value_repeat): Use read_value_memory instead of
        read_memory.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * value.h (value_contents_copy, value_contents_copy_raw): Declare.
        * value.c (value_contents_copy_raw, value_contents_copy): New
        functions.
        (value_primitive_field): Use value_contents_copy_raw instead of
        memcpy.
        * valops.c (value_fetch_lazy): Use value_contents_copy instead of
        memcpy.
        (value_array, value_slice): Ditto.
        * valarith.c (value_subscripted_rvalue): Use
        value_contents_copy_raw instead of memcpy.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        <unavailable> references.

        * valops.c (get_value_at): Use value_from_contents_and_address,
        avoiding read_memory.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * c-valprint.c (c_val_print): Print a string with unavailable
        contents as an array.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * value.h (unpack_bits_as_long): Delete declaration.
        (unpack_value_bits_as_long): Declare.
        (unpack_value_field_as_long): Declare.
        (value_field_bitfield): Declare.
        * value.c (unpack_bits_as_long): Rename to...
        (unpack_value_bits_as_long_1): ... this.  Add embedded_offset and
        value parameters.  Return the extracted result in a new output
        parameter.  If the value contents are unavailable, return false,
        otherwise return true.
        (unpack_value_bits_as_long): New.
        (unpack_field_as_long): Rename to...
        (unpack_value_field_as_long_1): ... this.  Add embedded_offset and
        Add embedded_offset and value parameters.  Return the extracted
        result in a new output parameter. If the value contents are
        unavailable, return false, otherwise return true.
        (unpack_value_field_as_long): New.
        (unpack_field_as_long_1): New.
        (unpack_field_as_long): Reimplement as wrapper around
        unpack_value_field_as_long_1.
        (value_field_bitfield): New function.
        * valops.c (value_fetch_lazy): When fetching a bitfield, use
        unpack_value_bits_as_long.  Mark the value as unavailable, if it
        is unavailable.
        * jv-valprint.c (java_print_value_fields): Use
        value_field_bitfield.
        * p-valprint.c (pascal_object_print_value_fields): Use
        value_field_bitfield.
        * cp-valprint.c (cp_print_value_fields): Use value_field_bitfield.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * value.c (get_internalvar_integer): Also return the int value of
        TYPE_CODE_INT INTERNALVAR_VALUE values.
        (set_internalvar): Don't special case TYPE_CODE_INT.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * value.c (struct internalvar) <enum internalvar_kind>: Remove
        INTERNALVAR_POINTER.
        <pointer>: Delete.
        (value_of_internalvar): Remove INTERNALVAR_POINTER handling.
        (set_internalvar): Remove special TYPE_CODE_PTR handling.
        (preserve_one_internalvar): Remove INTERNALVAR_POINTER handling.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * value.h (value_available_contents_eq): Declare.
        * value.c (find_first_range_overlap): New function.
        (value_available_contents_eq): New function.
        * valprint.c (val_print_array_elements): Use
        value_available_contents_eq.
        * ada-valprint.c (val_print_packed_array_elements): Use
        value_available_contents_eq.
        * jv-valprint.c (java_value_print): Use
        value_available_contents_eq.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * target.c (target_read_live_memory): New function.
        (memory_xfer_live_readonly_partial): New.
        (memory_xfer_partial): If reading from a traceframe, fallback to
        reading unavailable read-only memory from read-only regions of
        live target memory.
        * tracepoint.c (disconnect_tracing): Adjust.
        (set_current_traceframe): New, factored out from
        set_traceframe_number.
        (set_traceframe_number): Reimplement to only change the traceframe
        number on the GDB side.
        (do_restore_current_traceframe_cleanup): Adjust.
        (make_cleanup_restore_traceframe_number): New.
        (cur_traceframe_number): New global.
        (tfile_open): Set cur_traceframe_number to no traceframe.
        (set_tfile_traceframe): New function.
        (tfile_trace_find): If looking up a traceframe using any method
        other than by number, make sure the current tfile traceframe
        matches gdb's current traceframe.  Update the current tfile
        traceframe if the lookup succeeded.
        (tfile_fetch_registers, tfile_xfer_partial)
        (tfile_get_trace_state_variable_value): Make sure the remote
        traceframe matches gdb's current traceframe.
        * remote.c (remote_traceframe_number): New global.
        (remote_open_1): Set it to -1.
        (set_remote_traceframe): New function.
        (remote_fetch_registers, remote_store_registers)
        (remote_xfer_memory, remote_xfer_partial)
        (remote_get_trace_state_variable_value): Make sure the remote
        traceframe matches gdb's current traceframe.
        (remote_trace_find): If looking up a traceframe using any method
        other than by number, make sure the current remote traceframe
        matches gdb's current traceframe.  Update the current remote
        traceframe if the lookup succeeded.
        * infrun.c (fetch_inferior_event): Adjust.
        * tracepoint.h (set_current_traceframe): Declare.
        (get_traceframe_number, set_traceframe_number): Add describing
        comments.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        Mark pieces of values as unavailable if the corresponding memory
        is unavailable.

        * valops.c: Include tracepoint.h.
        (value_fetch_lazy): Use read_value_memory.
        (read_value_memory): New.
        * value.h (read_value_memory): Declare.
        * dwarf2loc.c (read_pieced_value): Use read_value_memory.
        * exec.c (section_table_available_memory): New function.
        * exec.h (section_table_available_memory): Declare.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * Makefile.in (SFILES): Add memrange.c.
        (HFILES_NO_SRCDIR): Add memrange.h.
        (COMMON_OBS): Add memrange.o.
        * memrange.c: New file.
        * memrange.h: New file.
        * tracepoint.c: Include memrange.h.
        (struct mem_range): Delete.
        (mem_range_s): Delete.
        (traceframe_available_memory): New function.
        * tracepoint.h (traceframe_available_memory): Declare.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        * target.h (struct traceframe_info): Forward declare.
        (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
        (struct target_ops) <to_traceframe_info>: New field.
        (target_traceframe_info): New.
        * target.c (update_current_target): Inherit and default
        to_traceframe_info.
        * remote.c (PACKET_qXfer_traceframe_info): New.
        (remote_protocol_features): Register qXfer:traceframe-info:read.
        (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
        (remote_traceframe_info): New.
        (init_remote_ops): Install it.
        (_initialize_remote): Install "set/show remote traceframe-info"
        commands.
        * tracepoint.h (parse_traceframe_info): Declare.
        * tracepoint.c (struct mem_range): New.
        (mem_range_s): New typedef.
        (struct traceframe_info): New.
        (traceframe_info): New global.
        (free_traceframe_info): New function.
        (clear_traceframe_info): New function.
        (start_tracing, tfind_1, set_traceframe_number): Clear traceframe
        info.
        (build_traceframe_info): New function.
        (tfile_traceframe_info): New function.
        (init_tfile_ops): Install tfile_traceframe_info.
        (traceframe_info_start_memory, free_result): New functions.
        (memory_attributes, traceframe_info_elements): New globals.
        (parse_traceframe_info, get_traceframe_info): New functions.
        * features/traceframe-info.dtd: New file.
        * Makefile.in (XMLFILES): Add traceframe-info.dtd.

2011-02-14  Pedro Alves  <pedro@codesourcery.com>

        Base support for <unavailable> value contents.

        * value.h (value_bytes_available): Declare.
        (mark_value_bytes_unavailable): Declare.
        * value.c (struct range): New struct.
        (range_s): New typedef.
        (ranges_overlap): New function.
        (range_lessthan): New function.
        (ranges_contain_p): New function.
        (struct value) <unavailable>: New field.
        (value_bytes_available): New function.
        (mark_value_bytes_unavailable): New function.
        (require_not_optimized_out): Constify parameter.
        (require_available): New function.
        (value_contents_all, value_contents): Require all bytes be
        available.
        (value_free): Free `unavailable'.
        (value_copy): Copy `unavailable'.
        * valprint.h (val_print_unavailable): Declare.
        * valprint.c (valprint_check_validity): Rename `offset' parameter
        to `embedded_offset'.  If printing a scalar, check whether the
        value chunk is available.
        (val_print_unavailable): New.
        (val_print_scalar_formatted): Check whether the value is
        available.
        * python/py-prettyprint.c (apply_val_pretty_printer): Refuse
        pretty-printing unavailable values.

2011-02-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix const/volatile qualifiers of C++ types, PR c++/12328.
        * c-typeprint.c (c_type_print_args): Update the function comment.  New
        variable param_type, initialize it.  Remove const/volatile qualifiers
        for language_cplus and !show_artificial.  Use param_type.

2011-02-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * symtab.c (find_pc_sect_line): New variable objfile, initialize it
        from S.  Iterate S using ALL_OBJFILE_SYMTABS.  Verify BV for each S.
        * symtab.h (struct symtab) <next>: Comment extension.

2011-02-12  Yao Qi  <yao@codesourcery.com>

        * Makefile.in (CLEANDIRS): Remove duplicated common dir.

2011-02-11  Yao Qi  <yao@codesourcery.com>

        * common/Makefile.in: Add copyright header.

2011-02-11  Pedro Alves  <pedro@codesourcery.com>

        * infrun.c (proceed): Move switching out and in of tfind mode from
        here ...
        (fetch_inferior_event): ... to here.

2011-02-11  Yao Qi  <yao@codesourcery.com>

        * Makefile.in: Remove signals.o from COMMON_OBS.  Link
        libcommon.a.
        * configure.ac: Add common to sub dir.
        * configure: Regenerate.

2011-02-11  Yao Qi  <yao@codesourcery.com>

        Build libcommon.a.

        * common/Makefile.in: New.
        * common/configure.ac: New.
        * common/aclocal.m4: New.
        * common/configure: Generate.

2011-02-10  Pedro Alves  <pedro@codesourcery.com>

        * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
        side of the parenthesis.

        Merge from GCC:
        2010-07-13  Jakub Jelinek  <jakub@redhat.com>
        * vec.h (VEC_block_remove): Fix comment.

2011-02-08  Michael Snyder  <msnyder@vmware.com>

        * linux-nat.c (linux_nat_filter_event): Fix typo in comment.

2011-02-08  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
        in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
        psubd and paddd.

2011-02-08  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR 12361.
        * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
        phsubsw.
        (i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
        (i386_process_record) <0x0f3807>: Fix the comment to phsubsw.

2011-02-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * dwarf2read.c (read_subroutine_type): Set special calling
        convention flag for functions compiled by IBM XL C for OpenCL.
        * ppc-sysv-tdep.c: Include "dwarf2.h"
        (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
        calling convention.
        (do_ppc_sysv_return_value): Add FUNC_TYPE argument.  Implement
        IBM OpenCL vector types calling convention.
        (ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
        (ppc_sysv_abi_broken_return_value): Likewise.
        (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
        types calling convention.
        (ppc64_sysv_abi_return_value): Likewise.
        * spu-tdep.c: Include "dwarf2.h"
        (spu_return_value): Implement IBM OpenCL vector types calling
        convention.

2011-02-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
        correct ABI for AltiVec vector arguments.

2011-02-07  Pedro Alves  <pedro@codesourcery.com>

        * valprint.c (val_print): Extend comment.
        * ada-valprint.c (ada_valprint): Rewrite comment deferring
        interface explanation to val_print.
        (ada_val_print_array): Adjust comment to current interface.
        (print_field_values): Adjust comment to current interface.
        * c-valprint.c (c_val_print): Rewrite comment deferring interface
        explanation to val_print.
        * f-valprint.c (f_val_print): Ditto.
        * jv-valprint.c (java_val_print): Ditto.
        * m2-valprint.c (m2_val_print): Ditto.
        * p-valprint.c (pascal_val_print): Ditto.

2011-02-07  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * breakpoint.c (parse_breakpoint_sals): Fix description.

2011-02-04  Sami Wagiaalla  <swagiaal@redhat.com>
            Oguz Kayral <oguzkayral@gmail.com>

        * python/py-inferior.c (python_on_normal_stop): New function.
        (python_on_resume): New function.
        (python_inferior_exit): New function.
        (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
        inferior_exit observers.
        * python/py-evtregistry.c: New file.
        * python/py-threadevent.c : New file.
        * python/py-event.c: New file.
        * python/py-evts.c: New file.
        * python/py-continueevent.c: New file.
        * python/py-bpevent.c: New file.
        * python/py-signalevent.c: New file.
        * python/py-exetiedevent.c: New file.
        * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
        Move struct breakpoint_object from here...
        * python/python-internal.h: ... to here.
        * python/py-event.h: New file.
        * python/py-events.h: New file.
        * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
        py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
        py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
        (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
        py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
        py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
        Add build rules for all the above.

2011-02-04  Tom Tromey  <tromey@redhat.com>

        * dwarf2read.c (dwarf2_section_empty_p): New function.
        (dwarf2_read_section): Use dwarf2_section_empty_p.
        (dwarf2_section_size): New function.
        (dwarf2_get_section_info): Unconditionally read section.
        (dwarf2_read_index): Use dwarf2_section_empty_p.
        (partial_read_comp_unit_head): Use dwarf2_section_size.
        (dwarf2_symbol_mark_computed): Likewise.

2011-02-04 David Daney <ddaney@caviumnetworks.com>

        * NEWS: Add item for "catch syscall" on mips*-linux* targets.

2011-02-04 David Daney <ddaney@caviumnetworks.com>

        * mips-linux-tdep.c: Include xml-syscall.h.
        (mips_linux_get_syscall_number): New function.
        (mips_linux_init_abi): Add calls to
        mips_linux_get_syscall_number() and set_xml_syscall_file_name().
        * data-directory/Makefile.in (SYSCALLS_FILES): Add
        mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
        * syscalls/mips-n32-linux.xml: New file.
        * syscalls/mips-n64-linux.xml: New file.
        * syscalls/mips-o32-linux.xml: New file.

2011-02-04  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
        Complain about inverted range entries.
        (dwarf2_record_block_ranges): Likewise.

2011-02-04  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        Fix some typos.
        * breakpoint.c (update_watchpoint): Fix name of the
        update_global_location_list function.
        (print_one_breakpoint): Fix typo.
        (_initialize_breakpoint): Remove extra space in hbreak help
        string.
        * breakpoint.h (struct bp_location) <length>: Fix field
        description.

2011-02-04  Pedro Alves  <pedro@codesourcery.com>

        * regcache.c (registers_changed_ptid): Don't explictly always
        clear `current_regcache'.  Only clear current_thread_ptid and
        current_thread_arch when PTID matches.  Only reinit the frame
        cache if PTID matches the current inferior_ptid.  Move alloca(0)
        call to ...
        (registers_changed): ... here.

2011-02-03  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
        starts with __stack_chk_guard as stack guard symbol.

2011-02-03  Andrew Burgess  <aburgess@broadcom.com>

        * disasm.c (compare_lines): Handle the end of sequence markers
        within the line table to better support disassembling over
        compilation unit boundaries.

2011-02-02  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
        arguments.  Skip in-prologue calls to glibc __aeabi_read_tp
        implementation even if no symbols are available.
        (thumb_analyze_prologue): Update call to skip_prologue_function.
        (arm_analyze_prologue): Likewise.

2011-02-02  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * arm-tdep.c: Include "observer.h".
        (arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
        (arm_exidx_data_key): New static variable.
        (struct arm_exidx_entry, arm_exidx_entry_s): New data types.
        (struct arm_exidx_data): Likewise.
        (arm_exidx_data_free): New function.
        (arm_compare_exidx_entries): Likewise.
        (arm_obj_section_from_vma): Likewise.
        (arm_exidx_new_objfile): Likewise.
        (arm_find_exidx_entry): Likewise.
        (arm_exidx_fill_cache): Likewise.
        (arm_exidx_unwind_sniffer): Likewise.
        (arm_exidx_unwind): New global variable.
        (arm_gdbarch_init): Append unwinder arm_exidx_unwind.
        (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
        observer.  Register arm_exidx_data_key as objfile data.

2011-02-02  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
        due to accessing uninitialized variable.  Fix indentation.

2011-02-02  Pedro Alves  <pedro@codesourcery.com>

        * c-valprint.c (c_value_print): When doing virtual base pointer
        adjustment, create a new value with adjusted contents rather than
        changing the contents of the value being printed (and getting it
        wrong).

2011-02-02  Pedro Alves  <pedro@codesourcery.com>

        * xml-support.c (xml_find_attribute): New.
        (xinclude_start_include): Use it.
        * xml-support.h (xml_find_attribute): Declare.
        * memory-map.c (memory_map_start_memory)
        (memory_map_start_property): Use xml_find_attribute.
        * osdata.c (osdata_start_osdata, osdata_start_column): Use
        xml_find_attribute.
        * remote.c (start_thread): Use xml_find_attribute.
        * solib-target.c (library_list_start_segment)
        (library_list_start_section, library_list_start_library)
        (library_list_start_list): Use xml_find_attribute.
        * xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
        (tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
        (tdesc_start_field): Use xml_find_attribute.

2011-02-02  Ulrich Weigand  <uweigand@de.ibm.com>

        * opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
        (BUILD_OCL_VTYPES): Update.

2011-02-02  Joel Brobecker  <brobecker@adacore.com>

        * configure.ac: Work around non-GNU sed limitation when computing
        python version number.
        * configure: Regenerate.

2011-02-01  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix debug printing of TYPE_INSTANCE.
        * expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
        (dump_subexp_body_standard) <TYPE_INSTANCE>: New.

2011-02-01  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
        OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
        OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
        * ada-operator.inc: Rename the file to ...
        * ada-operator.def: ... here, wrap all the entries by macro OP.
        * expprint.c (op_name_standard): Remove all the entries.  Include
        "std-operator.def" instead.
        * expression.h (enum exp_opcode): Include "std-operator.def" and
        "ada-operator.def".  Move all the entries ...
        * std-operator.def: ... here, wrap all the entries by macro OP.

2011-01-31  Paul Pluzhnikov  <ppluzhnikov@google.com>

        * breakpoint.h (remove_jit_event_breakpoints): New prototype.
        * breakpoint.c (remove_jit_event_breakpoints): New function.
        * jit.c (jit_descriptor_addr): Delete.
        (registering_code): Delete.
        (clear_int): Delete.
        (jit_inferior_data): New variable.
        (struct jit_inferior_data): New type.
        (get_jit_inferior_data): New function.
        (jit_inferior_data_cleanup): New function.
        (jit_read_descriptor): Adjust.
        (jit_register_code): Adjust.
        (jit_breakpoint_re_set_internal): New function; move code here ...
        (jit_inferior_init): ... from here.
        (jit_breakpoint_re_set): Adjust.
        (jit_reset_inferior_data_and_breakpoints): New function.
        (jit_inferior_created_observer): Adjust.
        (jit_inferior_exit_hook): Adjust.
        (jit_executable_changed_observer): New function.
        (jit_event_handler): Adjust.
        (_initialize_jit): Adjust.

2011-01-31  Michael Snyder  <msnyder@vmware.com>

        * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
        line.

2011-01-31  Tom Tromey  <tromey@redhat.com>

        PR python/12216:
        * python/python.c (execute_gdb_command): Call
        prevent_dont_repeat.
        * top.c (suppress_dont_repeat): New global.
        (dont_repeat): Use it.
        (prevent_dont_repeat): New function.
        * command.h (prevent_dont_repeat): Declare.

2011-01-31  Tom Tromey  <tromey@redhat.com>

        * infcmd.c (finish_backward): Use breakpoint_set_silent.
        * python/py-breakpoint.c (bppy_set_silent): Use
        breakpoint_set_silent.
        (bppy_set_thread): Use breakpoint_set_thread.
        (bppy_set_task): Use breakpoint_set_task.
        * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
        (breakpoint_set_task): Declare.
        (make_breakpoint_silent): Remove.
        * breakpoint.c (breakpoint_set_silent): New function.
        (breakpoint_set_thread): Likewise.
        (breakpoint_set_task): Likewise.
        (make_breakpoint_silent): Remove.

2011-01-31  Tom Tromey  <tromey@redhat.com>

        * breakpoint.h (user_breakpoint_p): Declare.
        * breakpoint.c (user_breakpoint_p): New function.
        (breakpoint_1): Use it.
        (save_breakpoints): Likewise.

2011-01-31  Joel Brobecker  <brobecker@adacore.com>

        * configure.ac: Add handling of Python distribution on Windows.
        * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
        sysconfig variables are not defined, then do not use them.
        On Windows, if LIBPL is not defined, then use prefix + '/libs'
        instead.  On Windows, return all paths using forward-slashes
        rather than backslashes.

2011-01-31  Joel Brobecker  <brobecker@adacore.com>

        * configure.ac: Remove fallback behavior for building
        against Python.  Remove tweaking of Python include path.
        Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
        (AC_TRY_LIBPYTHON):  Adjust program used in linking test.
        If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
        Always restore CPPFLAGS and LIBS after linking test.
        * configure: Regenerated.
        * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
        (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
        * python/python-internal.h: Adjust includes of Python .h files.

2011-01-31  Joel Brobecker  <brobecker@adacore.com>

        * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup
        in error message.

2011-01-31  Joel Brobecker  <brobecker@adacore.com>

        * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
        value test.

2011-01-31  Yao Qi  <yao@codesourcery.com>

        * arm-linux-nat.c: Update calls to regcache_register_status
        instead of regcache_valid_p.
        * aix-thread.c: Likewise.
        * i386gnu-nat.c: Likewise.

2011-01-29  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix crash.
        * valops.c (compare_parameters): Verify TYPE_NFIELDS before
        touching TYPE_FIELD_ARTIFICIAL.

2011-01-28  Richard Earnshaw  <rearnsha@arm.com>

        * MAINTAINERS: Move myself from Responsible Maintainers to Authorized
        Committers.

2011-01-28  Pedro Alves  <pedro@codesourcery.com>

        * tracepoint.c (tfile_xfer_partial): If there's no traceframe
        selected, don't try iterating over the traceframe's blocks.
        (tfile_has_stack): If there's no traceframe selected, then there's
        no stack.
        (tfile_has_registers): If there's no traceframe selected, then
        there's no registers.

2011-01-28  Pedro Alves  <pedro@codesourcery.com>

        * target.c (memory_xfer_partial): No need to restore shadows if we
        haven't read anything.

2011-01-28  Pedro Alves  <pedro@codesourcery.com>

        * mips-tdep.c (mips_print_register): Use get_frame_register_value
        and val_print_scalar_formatted.

2011-01-27  Pedro Alves  <pedro@codesourcery.com>

        * tracepoint.c (tfile_read): New.
        (tfile_open): Use it.
        (tfile_get_traceframe_address): Use it.
        (tfile_trace_find): Use it.
        (walk_blocks_callback_func): New typedef.
        (match_blocktype): New function.
        (traceframe_walk_blocks): New function.
        (traceframe_find_block_type): New function.
        (tfile_fetch_registers, tfile_xfer_partial)
        (tfile_get_trace_state_variable_value): Use
        traceframe_find_block_type and tfile_read.

2011-01-26  Kevin Buettner  <kevinb@redhat.com>

        * remote-mips.c: Add internationalization mark ups.  Remove
        trailing \n from already marked up strings.

2011-01-26  Tom Tromey  <tromey@redhat.com>

        * python/py-prettyprint.c (print_string_repr): Clear
        'addressprint' option when calling val_print_string.
        (print_children): Handle Val_pretty_default.  Clear 'addressprint'
        option when calling val_print_string.

2011-01-26  Tom Tromey  <tromey@redhat.com>

        * python/python.c (gdbpy_solib_name): Use gdb_py_longest and
        GDB_PY_LL_ARG.
        * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New
        macros.
        (gdb_py_longest, gdb_py_ulongest): New typedefs.
        (gdb_py_long_from_longest, gdb_py_long_from_ulongest)
        (gdb_py_long_as_ulongest): New defines.
        (gdb_py_object_from_longest, gdb_py_object_from_ulongest)
        (gdb_py_int_as_long): Declare.
        * python/py-value.c (valpy_lazy_string): Use gdb_py_longest,
        GDB_PY_LL_ARG, gdb_py_object_from_longest.
        (valpy_long): Add comment.
        * python/py-utils.c (get_addr_from_python): Use
        gdb_py_long_as_ulongest.  Handle overflow properly.
        (gdb_py_object_from_longest): New function.
        (gdb_py_object_from_ulongest): Likewise.
        (gdb_py_int_as_long): Likewise.
        * python/py-type.c (typy_array): Use gdb_py_int_as_long.
        * python/py-symtab.c (salpy_get_pc): Use
        gdb_py_long_from_ulongest.
        (salpy_get_line): Use PyInt_FromLong.
        * python/py-param.c (set_parameter_value): Use
        gdb_py_int_as_long.
        * python/py-lazy-string.c (stpy_get_address): Use
        gdb_py_long_from_ulongest.
        * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest.
        * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long.
        * python/py-breakpoint.c (bppy_set_thread): Use
        gdb_py_int_as_long.
        (bppy_set_task): Likewise.
        (bppy_set_ignore_count): Likewise.
        (bppy_set_hit_count): Likewise.
        * python/py-block.c (blpy_get_start): Use
        gdb_py_object_from_ulongest.
        (blpy_get_end): Likewise.
        (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG.

2011-01-25  Mathieu Lacage  <mathieu.lacage@inria.fr>

        PR/symtab 11766:
        * gdb/objfiles.h (struct objfile) <addr_low>: New field.
        * gdb/solib.c (solib_read_symbols): Check for addr_low in
        equality test for objfile, initialize addr_low if needed.

2011-01-25  Pedro Alves  <pedro@codesourcery.com>

        * tui/tui-regs.c (tui_register_format): Remove dead code.

2011-01-25  Pedro Alves  <pedro@codesourcery.com>

        * printcmd.c (print_formatted): Use val_print_scalar_formatted
        instead of print_scalar_formatted.
        (print_scalar_formatted): Don't handle 's' format strings here,
        and add an assertion that we never see such format here.
        * valprint.h (val_print_scalar_formatted): Declare.
        * valprint.c (val_print_scalar_formatted): New.
        * c-valprint.c (c_val_print): Use val_print_scalar_formatted
        instead of print_scalar_formatted.
        * jv-valprint.c (java_val_print): Ditto.
        * p-valprint.c (pascal_val_print): Ditto.
        * ada-valprint.c (ada_val_print_1): Ditto.
        * f-valprint.c (f_val_print): Ditto.
        * infcmd.c (registers_info): Ditto.
        * m2-valprint.c (m2_val_print): Ditto.

2011-01-25  Pedro Alves  <pedro@codesourcery.com>

        * m2-valprint.c (print_unbounded_array): Pass
        value_contents_for_printing rather than value_contents, to
        m2_print_array_contents.  Also pass in the value.

2011-01-25  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
        (save_gdb_index_command): Switch to .gdb_index version 4.

2011-01-25  Pedro Alves  <pedro@codesourcery.com>

        * mi/mi-main.c (get_register): Use get_frame_register_value rather
        than frame_register, and always pass a valid value to val_print.

2011-01-25  Pedro Alves  <pedro@codesourcery.com>

        Centralize printing "<optimized out>".

        * valprint.h (val_print_optimized_out): Declare.
        * cp-valprint.c (cp_print_value_fields): Use
        val_print_optimized_out.
        * jv-valprint.c (java_print_value_fields): Ditto.
        * p-valprint.c (pascal_object_print_value_fields): Ditto.
        * printcmd.c (print_formatted): Ditto.
        * valprint.c (valprint_check_validity): Ditto.
        (value_check_printable): Ditto.
        (val_print_optimized_out): New.

2011-01-25  Pedro Alves  <pedro@codesourcery.com>

        * infcmd.c (default_print_registers_info): Allocate values so to
        never pass a NULL value to val_print.

2011-01-25  Pedro Alves  <pedro@codesourcery.com>

        * cp-valprint.c (cp_print_value): Treat the 'skip' local as
        boolean.  Make sure to always pass a value that matches the
        contents buffer to callees.  Preserve `address' for following
        iterations.
        * value.c (value_contents_for_printing_const): New.
        (value_address): Constify value argument.
        * value.h (value_contents_for_printing_const): Declare.
        (value_address): Constify value argument.

2011-01-25  Pedro Alves  <pedro@codesourcery.com>

        * regcache.c (struct regcache_descr): Rename
        sizeof_raw_register_valid_p field to sizeof_raw_register_status,
        and sizeof_cooked_register_valid_p to
        sizeof_cooked_register_status.
        (init_regcache_descr): Adjust.
        (struct regcache): Rename register_valid_p field to
        register_status.
        (regcache_xmalloc_1, regcache_xfree, regcache_save)
        (do_cooked_read): Adjust.
        (regcache_valid_p): Rename to ...
        (regcache_register_status): ... this.  Adjust.
        (regcache_invalidate): Adjust.
        (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
        Adjust.
        (regcache_raw_supply): Adjust.  If buf i NULL, mark the register
        as unavailable, not valid.
        (regcache_dump): Adjust.
        * regcache.h (enum register_status): New.
        (regcache_register_status): Declare.
        (regcache_invalidate): Delete declaration.
        * corelow.c (get_core_registers): Adjust.
        * tracepoint.c (tfile_fetch_registers): Adjust.
        * trad-frame.c (REG_VALUE): Rename to ...
        (TF_REG_VALUE): ... this.
        (REG_UNKNOWN): Rename to ...
        (TF_REG_UNKNOWN): ... this.
        (trad_frame_set_value, trad_frame_set_unknown): Adjust.
        * mi/mi-main.c (register_changed_p): Adjust.

2011-01-25  Pedro Alves  <pedro@codesourcery.com>

        * regcache.c (struct regcache_descr): Remove outdated comment.
        (init_regcache_descr): Remove sizeof_raw_register_valid_p
        overallocate hack.
        (regcache_xmalloc): Rename to ...
        (regcache_xmalloc_1): ... this.  Add `readonly_p' parameter.
        Allocate the regcache type accordingly.
        (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
        (regcache_xfree): Asser the source is also readonly.  Copy sizeof
        cooked registers, not raw.
        (regcache_dup_no_passthrough): Delete.
        (get_thread_arch_regcache): Use regcache_xmalloc_1.
        * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
        mention obsolete write_register_bytes.
        * regcache.h (regcache_dup_no_passthrough): Delete declaration.

2011-01-25  Pedro Alves  <pedro@codesourcery.com>

        Stop remote_read_bytes from handling partial reads itself.

        * remote-fileio.c: Include target.h.
        (remote_fileio_write_bytes): Delete.
        (remote_fileio_func_open, remote_fileio_func_write)
        (remote_fileio_func_rename, remote_fileio_func_unlink): Use
        target_read_memory.
        (remote_fileio_func_stat): Use target_read_memory and
        target_write_memory.
        (remote_fileio_func_gettimeofday): Use target_write_memory.
        (remote_fileio_func_system): Use target_read_memory.
        * remote.c (remote_write_bytes): Make it static.
        (remote_read_bytes): Don't handle partial reads here.
        * remote.h (remote_read_bytes): Delete declaration.

2011-01-25  Pedro Alves  <pedro@codesourcery.com>

        Simplify XML parsing a bit.

        * xml-support.h (gdb_xml_parse_quick): Declare.
        * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
        from gdb_xml_create_parser_and_cleanup, and added `old_chain'
        parameter.
        (gdb_xml_create_parser_and_cleanup): Reimplement on top of
        gdb_xml_create_parser_and_cleanup_1.
        (gdb_xml_parse_quick): New.
        * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
        * osdata.c (osdata_parse): Ditto.
        * remote.c (remote_threads_info): Ditto.
        * solib-target.c (solib_target_parse_libraries): Ditto.
        * xml-syscall.c (syscall_parse_xml): Ditto.
        * xml-tdesc.c (tdesc_parse_xml): Ditto.

2011-01-24  Kevin Buettner  <kevinb@redhat.com>

        * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
        with remote-mips.o added to gdb_target_obs.
        * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.

2011-01-24  Pedro Alves  <pedro@codesourcery.com>

        * ada-valprint.c (val_print_packed_array_elements): Pass the
        correct struct value to val_print.
        (ada_val_print_1): Ditto.

2011-01-24  Pedro Alves  <pedro@codesourcery.com>

        Don't lose embedded_offset in printing routines throughout.

        * valprint.h (val_print_array_elements): Change prototype.
        * valprint.c (val_print_array_elements): Add `embedded_offset'
        parameter, and adjust to pass it down to val_print, while passing
        `valaddr' or `address' unmodified.  Take embedded_offset into
        account when checking repetitions.
        * c-valprint.c (c_val_print): Pass embedded_offset to
        val_print_array_elements instead of adjusting `valaddr' and
        `address'.
        * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
        embedded_offset to val_print_array_elements instead of adjusting
        `valaddr'.
        * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
        * p-valprint.c (pascal_val_print): Pass embedded_offset to
        val_print_array_elements and pascal_object_print_value_fields
        instead of adjusting `valaddr'.
        (pascal_object_print_value_fields): Add `offset' parameter, and
        adjust to use it.
        (pascal_object_print_value): Add `offset' parameter, and adjust to
        use it.
        (pascal_object_print_static_field): Use
        value_contents_for_printing/value_embedded_offset, rather than
        value_contents.
        * ada-valprint.c (val_print_packed_array_elements): Add `offset'
        parameter, and adjust to use it.  Use
        value_contents_for_printing/value_embedded_offset, rather than
        value_contents.
        (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
        (ada_val_print_array): Add `offset' parameter, and adjust to use
        it.
        (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
        `embedded_offset' to `offset'.  Don't re-adjust `valaddr'.
        Instead work with offsets.  Use
        value_contents_for_printing/value_embedded_offset, rather than
        value_contents.  Change `defer_val_int' local type to CORE_ADDR,
        and use value_from_pointer to extract a target pointer, rather
        than value_from_longest.
        (print_variant_part): Add `offset' parameter.  Replace
        `outer_valaddr' parameter by a new `outer_offset' parameter.
        Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
        (ada_value_print): Use
        value_contents_for_printing/value_embedded_offset, rather than
        value_contents.
        (print_record): Add `offset' parameter, and adjust to pass it
        down.
        (print_field_values): Add `offset' parameter.  Replace
        `outer_valaddr' parameter by a new `outer_offset' parameter.
        Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
        Use value_contents_for_printing/value_embedded_offset, rather than
        value_contents.
        * d-valprint.c (dynamic_array_type): Use
        value_contents_for_printing/value_embedded_offset, rather than
        value_contents.
        * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
        Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
        (java_print_value_fields): Take `offset' into account.  Don't
        re-adjust `valaddr'.  Instead pass down adjusted offsets.
        (java_val_print): Take `embedded_offset' into account.  Pass it to
        java_print_value_fields.
        * f-valprint.c (f77_print_array_1): Add `embedded_offset'
        parameter.  Don't re-adjust `valaddr' or `address'.  Instead pass
        down adjusted offsets.
        (f77_print_array): Add `embedded_offset' parameter.  Pass it down.
        (f_val_print): Take `embedded_offset' into account.

2011-01-21  Joel Brobecker  <brobecker@adacore.com>

        * inflow.c: Include "gdbcmd.h".
        (interactive_mode): New static global, moved here from top.c.
        (show_interactive_mode): New function, moved here from top.c.
        use gdb_has_a_terminal instead of input_from_terminal_p to
        determine the current mode.
        (gdb_has_a_terminal): Add handling of the "iteractive-mode"
        setting.
        (_initialize_inflow): Add the "set/show interactive-mode"
        commands.  Moved here from top.c, after having adjusted slightly
        the help text.
        * top.c (interactive_mode, show_interactive_mode): Delete, moved
        to inflow.c.
        (input_from_terminal_p): Remove handling of "interactive-mode"
        setting, moved to infow.c.
        (init_main): Remove creation of the "set/show interactive-mode"
        commands, moved to inflow.c.

2011-01-19  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Add entry for native ia64-hpux support.

2011-01-19  Tom Tromey  <tromey@redhat.com>

        PR mi/8618:
        * thread.c (free_thread): Free 'name'.
        (print_thread_info): Emit thread name.  Change CLI output.
        (thread_name_command): New function.
        (do_captured_thread_select): Emit newline.
        (_initialize_thread): Register 'thread name' command.
        * target.h (struct target_ops) <to_thread_name>: New field.
        (target_thread_name): New macro.
        * target.c (update_current_target): Handle to_thread_name.
        * python/py-infthread.c (thpy_get_name): New function.
        (thpy_set_name): Likewise.
        (thread_object_getset): Add "name".
        * linux-nat.c (linux_nat_thread_name): New function.
        (linux_nat_add_target): Set to_thread_name.
        * gdbthread.h (struct thread_info) <name>: New field.

2011-01-18  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
        (ada_val_print_1): Likewise.

2011-01-18  Joel Brobecker  <brobecker@adacore.com>

        * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
        upper limit address is not greater than the function end address
        when the upper limit could not be computed using the debugging
        info.

2011-01-17  Tom Tromey  <tromey@redhat.com>

        * cli/cli-cmds.c (apropos_command): Free the compiled regex.  Use
        get_regcomp_error.
        * utils.c: Include gdb_regex.h.
        (do_regfree_cleanup): New function.
        (make_regfree_cleanup): Likewise.
        (get_regcomp_error): Likewise.
        * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.

2011-01-17  Tom Tromey  <tromey@redhat.com>

        * cli/cli-cmds.c (apropos_command): Fix formatting.  Don't call
        re_compile_fastmap.

2011-01-17  Pierre Muller  <muller@ics.u-strasbg.fr>

        * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
        for internal variables.
        (last_was_structop): New static variable.
        (COMPLETE): New token.
        (field_exp): New rule to group all '.' suffix handling.
        Add mark_struct_expression calls when approriate to be able
        to correctly find fields for completion.
        (yylex): Adapt to handle field completion and set INTVAR when
        required.

2011-01-14  Yao Qi  <yao@codesourcery.com>

        * arm-tdep.c (arm_register_reggroup_p): FPS register is in
        save_reggroup, restore_reggroup and all_reggroup.

2011-01-14  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint. (ada_printchar): Use the correct type length
        in call to ada_emit_char.
        * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.

2011-01-14  Pierre Muller  <muller@ics.u-strasbg.fr>

        * solib-som.h (hpux_major_release): Declare variable here.
        * solib-som.c:  Remove <sys/utsname.h> header.
        (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
        (hpux_major_release): Make global, change default value to
        DEFAULT_HPUX_MAJOR_RELEASE.
        (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
        * hppa-hpux-nat.c: Add <sys/utsname.h> include.
        Add "solib-som.h" header.
        (set_hpux_major_release): New function.
        (_initialize_hppa_hpux_nat): Call set_hpux_major_release.

2011-01-14  Mike Frysinger  <vapier@gentoo.org>

        * configure.tgt (*-*-uclinux*): Match more Linux os targets

2011-01-14  Joel Brobecker  <brobecker@adacore.com>

        * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
        new-line at end of warning message.
        (ia64_hpux_store_register): Remove trailing new-line at end of
        error message.
        * ia64-hpux-tdep.c: Rephrase comment.
        * solib-ia64-hpux.c (struct dld_info): Change type of field
        dld_flags from "long long" to ULONGEST.

2011-01-14  Pedro Alves  <pedro@codesourcery.com>

        * target.h (deprecated_child_ops): Delete declaration.
        * target.c (deprecated_child_ops): Delete definition.

2011-01-14  Pedro Alves  <pedro@codesourcery.com>

        * Makefile.in (hpux-thread.o): Delete rule.
        * configure.ac: Don't check for HPUX DCE threads support.
        * configure, config.in: Regenerate.
        * hppa-hpux-nat.c (child_suppress_run): Delete.
        (hppa_hpux_child_can_run): Delete.
        (_initialize_hppa_hpux_nat): Don't override to_can_run.
        * hpux-thread.c: Delete.

2011-01-13  Joel Brobecker  <brobecker@adacore.com>

        * hpux-thread.c (hpux_pid_to_str): Delete.

2011-01-13  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (ada_emit_char): Remove strange code.
        Check that c is <= UCHAR_MAX before passing it to isascii.
        (char_at): Do not assume that TYPE_LEN is either 1 or 2.

2011-01-13  Joel Brobecker  <brobecker@adacore.com>

        * top.c (input_from_terminal_p): Restrict the use of interactive_mode
        to the case where instream is stdin.

2011-01-13  Joel Brobecker  <brobecker@adacore.com>

        * ia64-tdep.h (struct regcache): Forward declare.
        (struct ia64_infcall_ops): New struct type.
        (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
        and "infcall_ops".
        * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
        Renames ia64_find_global_pointer.
        (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
        (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
        (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
        methods.
        (ia64_infcall_ops): New static global constant.
        (ia64_gdbarch_init): Set tdep->infcall_ops.
        * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
        (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
        * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
        (ia64_hpux_dummy_code): New static global constant.
        (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
        (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
        (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
        New function.
        (ia64_hpux_infcall_ops): New static global constant.
        (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
        for inferior function calls to work properly on ia64-hpux.

2011-01-13  Joel Brobecker  <brobecker@adacore.com>

        * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
        * ia64-tdep.h (struct frame_info): forward declaration.
        (struct gdbarch_tdep): Add field size_of_register_frame.
        * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
        to determine the size of the register frame.
        (ia64_size_of_register_frame): New function.
        (ia64_gdbarch_init): Set tdep->size_of_register_frame.
        * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
        (IA64_HPUX_UREG_REASON): New macro.
        (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
        New functions.
        (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
        * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
        (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
        objects.

2011-01-13  Joel Brobecker  <brobecker@adacore.com>

        Add support for ia64-hpux.
        * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
        ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.

        * configure.host: Add handling for ia64-hpux hosts.  Add associated
        floatformats.
        * configure.tgt: Add handling for ia64-hpux targets.
        * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
        (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
        (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.

2011-01-13  Joel Brobecker  <brobecker@adacore.com>

        [ttrace] Compute thread list immediately after attach.
        * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
        New subprogram.
        (inf_ttrace_attach): Use it.

2011-01-13  Joel Brobecker  <brobecker@adacore.com>

        * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
        if we could not determine the frame's function address.  Instead,
        use the frame's PC, and then continue.

2011-01-13  Joel Brobecker  <brobecker@adacore.com>

        * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
        not already defined.

2011-01-13  Joel Brobecker  <brobecker@adacore.com>

        * ia64-tdep.c (ia64_struct_type_p): New function.
        (ia64_extract_return_value): Handle integral values that are
        less than 8 bytes long.
        (ia64_push_dummy_call): Likewise.

2011-01-13  Joel Brobecker  <brobecker@adacore.com>

        * ia64-tdep.c (floatformat_ia64_ext_little): Renames
        floatformat_ia64_ext.
        (floatformat_ia64_ext_big): New static const.
        (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.

2011-01-12  Tom Tromey  <tromey@redhat.com>

        * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
        messages.
        * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
        (mi_cmd_thread_list_ids): Likewise.
        (mi_cmd_data_list_changed_registers): Likewise.
        (mi_cmd_data_list_register_values): Likewise.
        (mi_cmd_data_write_register_values): Likewise.
        (mi_cmd_data_evaluate_expression): Likewise.
        (mi_cmd_data_read_memory): Likewise.
        (mi_cmd_data_read_memory_bytes): Likewise.
        (mi_cmd_data_write_memory): Likewise.
        (mi_cmd_enable_timings): Likewise.
        * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
        * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
        (mi_cmd_var_delete): Likewise.
        (mi_cmd_var_set_format): Likewise.
        (mi_cmd_var_show_format): Likewise.
        (mi_cmd_var_info_num_children): Likewise.
        (mi_cmd_var_list_children): Likewise.
        (mi_cmd_var_info_type): Likewise.
        (mi_cmd_var_info_expression): Likewise.
        (mi_cmd_var_show_attributes): Likewise.
        (mi_cmd_var_assign): Likewise.
        (mi_cmd_var_update): Likewise.
        (mi_cmd_enable_pretty_printing): Likewise.
        (mi_cmd_var_set_update_range): Likewise.
        * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
        messages.
        (mi_cmd_target_file_put): Likewise.
        (mi_cmd_target_file_delete): Likewise.
        * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
        messages.
        (mi_cmd_stack_info_depth): Likewise.
        (mi_cmd_stack_list_locals): Likewise.
        (mi_cmd_stack_list_args): Likewise.
        (mi_cmd_stack_select_frame): Likewise.
        (mi_cmd_stack_select_frame): Likewise.
        (mi_cmd_stack_info_frame): Likewise.
        * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
        messages.
        (mi_cmd_file_list_exec_source_files): Likewise.
        * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
        (mi_cmd_env_cd): Likewise.
        (mi_cmd_env_path): Likewise.
        (mi_cmd_env_dir): Likewise.
        (mi_cmd_inferior_tty_show): Likewise.
        * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
        * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
        (mi_cmd_break_watch): Likewise.

2011-01-12  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
        (ppc_linux_insert_hw_breakpoint): Likewise.
        (ppc_linux_remove_hw_breakpoint): Likewise.
        (ppc_linux_insert_watchpoint): Likewise.

2011-01-12  Andrew Burgess  <aburgess@broadcom.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR fortran/11104 and DWARF unbound arrays detection.
        * dwarf2read.c (read_subrange_type): Set zero length on unspecified
        upper bound.  Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
        unspecified upper bound.
        * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
        variables array_size_array, tmp_type and offset_item.  New variable
        array.  Remove call to f77_get_upperbound.  New variables array_type
        and index.  Call value_subscripted_rvalue for each dimenasion.  Remove
        the final call to deprecated_set_value_type.

2011-01-12  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Make value allocations more lazy.
        * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
        instead of allocate_value and set_value_lazy when possible.
        * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
        instead of allocate_value and set_value_lazy.
        * findvar.c (value_of_register_lazy): Likewise.
        (read_var_value): Remove V preallocation, call just check_typedef in
        advance.  Move allocate_value to LOC_CONST, LOC_LABEL,
        LOC_CONST_BYTES.  Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
        LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK.  Set ADDR instead of
        set_value_address and break in LOC_BLOCK.  Use allocate_value_lazy and
        remove lval_memory set in LOC_REGPARM_ADDR.  Use allocate_value_lazy
        in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT.  Add setting lval_memory at
        the end, remove set_value_lazy there.
        * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
        instead of allocate_value and set_value_lazy when possible.
        * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
        * value.c (allocate_computed_value): Use allocate_value_lazy instead
        of allocate_value and set_value_lazy.
        (value_from_contents_and_address): Use allocate_value_lazy instead of
        allocate_value and set_value_lazy when possible.

2011-01-12  Andrew Burgess  <aburgess@broadcom.com>

        * disasm.c (dump_insns): Support dumping opcodes for MI.
        * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
        dumping of instruction opcodes.

2011-01-09  Robert Millan  <rmh@gnu.org>  (tiny patch)

        * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
        appropiately.

2011-01-11  Tom Tromey  <tromey@redhat.com>

        * thread.c (do_captured_thread_select): Emit newline before
        printing frame.

2011-01-11  Michael Snyder  <msnyder@vmware.com>

        * s390-tdep.c: Comment cleanup, mostly periods and spaces.
        * score-tdep.c: Ditto.
        * score-tdep.h: Ditto.
        * ser-base.c: Ditto.
        * ser-go32.c: Ditto.
        * serial.c: Ditto.
        * serial.h: Ditto.
        * ser-mingw.c: Ditto.
        * ser-pipe.c: Ditto.
        * ser-tcp.c: Ditto.
        * ser-unix.c: Ditto.
        * sh64-tdep.c: Ditto.
        * shnbsd-nat.c: Ditto.
        * sh-tdep.c: Ditto.
        * sh-tdep.h: Ditto.
        * solib.c: Ditto.
        * solib-darwin.c: Ditto.
        * solib-frv.c: Ditto.
        * solib.h: Ditto.
        * solib-irix.c: Ditto.
        * solib-osf.c: Ditto.
        * solib-pa64.c: Ditto.
        * solib-som.c: Ditto.
        * solib-spu.c: Ditto.
        * solib-sunos.c: Ditto.
        * solib-svr4.c: Ditto.
        * solist.h: Ditto.
        * sol-thread.c: Ditto.
        * somread.c: Ditto.
        * source.c: Ditto.
        * source.h: Ditto.
        * sparc64-linux-tdep.c: Ditto.
        * sparc64-tdep.c: Ditto.
        * sparc-linux-nat.c: Ditto.
        * sparc-linux-tdep.c: Ditto.
        * sparc-sol2-nat.c: Ditto.
        * sparc-sol2-tdep.c: Ditto.
        * sparc-tdep.c: Ditto.
        * sparc-tdep.h: Ditto.
        * spu-tdep.c: Ditto.
        * stabsread.c: Ditto.
        * stabsread.h: Ditto.
        * stack.c: Ditto.
        * symfile.c: Ditto.
        * symfile.h: Ditto.
        * symmisc.c: Ditto.
        * symtab.c: Ditto.
        * symtab.h: Ditto.
        * target.c: Ditto.
        * target-descriptions.c: Ditto.
        * target-descriptions.h: Ditto.
        * target.h: Ditto.
        * target-memory.c: Ditto.
        * terminal.h: Ditto.
        * thread.c: Ditto.
        * top.c: Ditto.
        * tracepoint.c: Ditto.
        * tracepoint.h: Ditto.
        * trad-frame.h: Ditto.
        * typeprint.c: Ditto.

2011-01-11  Michael Snyder  <msnyder@vmware.com>

        * ui-file.c: Comment cleanup, mostly periods and spaces.
        * ui-file.h: Ditto.
        * ui-out.c: Ditto.
        * ui-out.h: Ditto.
        * utils.c: Ditto.
        * v850-tdep.c: Ditto.
        * valarith.c: Ditto.
        * valops.c: Ditto.
        * valprint.c: Ditto.
        * valprint.h: Ditto.
        * value.c: Ditto.
        * value.h: Ditto.
        * varobj.c: Ditto.
        * varobj.h: Ditto.
        * vax-tdep.c: Ditto.
        * vec.c: Ditto.
        * vec.h: Ditto.
        * version.h: Ditto.
        * windows-nat.c: Ditto.
        * windows-tdep.c: Ditto.
        * xcoffread.c: Ditto.
        * xcoffsolib.c: Ditto.
        * xml-support.c: Ditto.
        * xstormy16-tdep.c: Ditto.
        * xtensa-tdep.c: Ditto.
        * xtensa-tdep.h: Ditto.

2011-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * breakpoint.c (resources_needed_watchpoint): Fix indentation.
        * gdbtypes.c (is_scalar_type_recursive): Fix formatting.

2011-01-11  Sergio Durigan Junior  <sergiodj@linux.vnet.ibm.com>
            Thiago Jung Bauermann  <bauerman@br.ibm.com>

        Implement support for PowerPC BookE ranged watchpoints.
        * breakpoint.h
        (struct breakpoint_ops) <resources_needed>: New method.
        Initialize to NULL in all existing breakpoint_ops instances.
        (struct breakpoint) <exact>: New field.
        (target_exact_watchpoints): Declare external global.
        * breakpoint.c (target_exact_watchpoints): New global flag.
        (update_watchpoint): Set b->type to bp_hardware_watchpoint and
        b->enable_state to bp_enabled before calling
        hw_watchpoint_used_count.
        (hw_watchpoint_used_count): Iterate over all bp_locations in a
        watchpoint.  Call breakpoint's breakpoint_ops.resources_needed
        if available.
        (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
        if the watchpoint is exact.
        (resources_needed_watchpoint): New function.
        (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
        (watch_command_1): Set b->exact if the user asked for an exact
        watchpoint and one can be set.
        (can_use_hardware_watchpoint): Add exact_watchpoints argument.
        Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
        the user asks for an exact watchpoint and one can be set.  Return
        number of needed debug registers to watch the expression.
        * gdbtypes.c (is_scalar_type): New function, based on
        valprint.c:scalar_type_p.
        (is_scalar_type_recursive): New function.
        * gdbtypes.h (is_scalar_type_recursive): Declare.
        * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
        handle regions when ranged watchpoints are available.
        (create_watchpoint_request): New function.
        (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
        create_watchpoint_request.
        * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
        (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
        `set powerpc' and `show powerpc' commands.
        * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
        Mention documentation comment in the target macro.
        (target_region_ok_for_hw_watchpoint): Document return value.

2011-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * breakpoint.c (update_watchpoint): Decide on using a software or
        hardware watchpoint after the bp_locations are created.

2010-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        Convert hardware watchpoints to use breakpoint_ops.
        * breakpoint.h (breakpoint_ops) <insert>: Rename to...
        <insert_location>: ... this.  Return int instead of void.
        Accept pointer to struct bp_location instead of pointer to
        struct breakpoint.  Adapt all implementations.
        (breakpoint_ops) <remove>: Rename to...
        <remove_location>: ... this.  Accept pointer to struct bp_location
        instead of pointer to struct breakpoint.  Adapt all implementations.
        * breakpoint.c (insert_catchpoint): Delete function.
        (insert_bp_location): Call the watchpoint or catchpoint's
        breakpoint_ops.insert method.
        (remove_breakpoint_1): Call the watchpoint or catchpoint's
        breakpoint_ops.remove method.
        (insert_watchpoint, remove_watchpoint): New functions.
        (watchpoint_breakpoint_ops): New structure.
        (watch_command_1): Initialize the OPS field.
        * inf-child.c (inf_child_insert_fork_catchpoint)
        (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
        (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
        (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
        Delete functions.
        (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
        to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
        to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
        to_remove_exec_catchpoint and to_set_syscall_catchpoint.
        * target.c (update_current_target): Change default implementation of
        to_insert_fork_catchpoint, to_remove_fork_catchpoint,
        to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
        to_insert_exec_catchpoint, to_remove_exec_catchpoint and
        to_set_syscall_catchpoint to return_one.
        (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
        (debug_to_insert_exec_catchpoint): Report return value.
        * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
        (to_insert_exec_catchpoint): Change declaration to return int instead
        of void.

2011-01-11  Michael Snyder  <msnyder@vmware.com>

        * arm-tdep.c: Internationalization.
        * c-lang.c: Ditto.
        * charset.c: Ditto.
        * fork-child.c: Ditto.
        * nto-procfs.c: Ditto.
        * ppc-sysv-tdep.c: Ditto.
        * procfs.c: Ditto.
        * remote-mips.c: Ditto.
        * remote.c: Ditto.
        * rs6000-nat.c: Ditto.
        * rs6000-tdep.c: Ditto.
        * target.c: Ditto.
        * valops.c: Ditto.
        * value.c: Ditto.
        * xml-support.c: Ditto.
        * mi/mi-cmd-break.c: Ditto.
        * mi/mi-cmd-var.c: Ditto.
        * mi/mi-interp.c: Ditto.
        * mi/mi-main.c: Ditto.

2011-01-11  Andrew Burgess  <aburgess@broadcom.com>

        * remote-sim.c (gdbsim_store_register): Update API to
        sim_store_register to check more error conditions.

2011-01-10  Michael Snyder  <msnyder@vmware.com>

        * nto-procfs.c: Comment cleanup, mostly periods and spaces.
        * nto-tdep.c: Ditto.
        * nto-tdep.h: Ditto.
        * objc-exp.y: Ditto.
        * objc-lang.c: Ditto.
        * objfiles.c: Ditto.
        * objfiles.h: Ditto.
        * observer.c: Ditto.
        * opencl-lang.c: Ditto.
        * osabi.c: Ditto.
        * parse.c: Ditto.
        * parser-defs.h: Ditto.
        * p-exp.y: Ditto.
        * p-lang.c: Ditto.
        * posix-hdep.c: Ditto.
        * ppcbug-rom.c: Ditto.
        * ppc-linux-nat.c: Ditto.
        * ppc-linux-tdep.c: Ditto.
        * ppc-linux-tdep.h: Ditto.
        * ppcnbsd-tdep.c: Ditto.
        * ppcobsd-tdep.c: Ditto.
        * ppcobsd-tdep.h: Ditto.
        * ppc-sysv-tdep.c: Ditto.
        * ppc-tdep.h: Ditto.
        * printcmd.c: Ditto.
        * proc-abi.c: Ditto.
        * proc-flags.c: Ditto.
        * procfs.c: Ditto.
        * proc-utils.h: Ditto.
        * progspace.h: Ditto.
        * prologue-value.c: Ditto.
        * prologue-value.h: Ditto.
        * psympriv.h: Ditto.
        * psymtab.c: Ditto.
        * p-typeprint.c: Ditto.
        * p-valprint.c: Ditto.
        * ravenscar-sparc-thread.c: Ditto.
        * ravenscar-thread.c: Ditto.
        * ravenscar-thread.h: Ditto.
        * record.c: Ditto.
        * regcache.c: Ditto.
        * regcache.h: Ditto.
        * remote.c: Ditto.
        * remote-fileio.c: Ditto.
        * remote-fileio.h: Ditto.
        * remote.h: Ditto.
        * remote-m32r-sdi.c: Ditto.
        * remote-mips.c: Ditto.
        * remote-sim.c: Ditto.
        * rs6000-aix-tdep.c: Ditto.
        * rs6000-nat.c: Ditto.
        * rs6000-tdep.c: Ditto.

2011-01-10  Michael Snyder  <msnyder@vmware.com>

        * charset.c (validate): Internationalization.
        * coffread.c (read_one_sym): Ditto.
        * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
        * h8300-tdep.c (H8300_extract_return_value): Ditto.
        * inflow.c (new_tty): Ditto.
        * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
        * m32c-tdep.c (m32c_return_value): Ditto.
        * mep-tdep.c (mep_store_return_value): Ditto.
        * score-tdep.c (score7_fetch_insn): Ditto.
        * ser-mingw.c (pipe_windows_open): Ditto.
        * sh64-tdep.c (sh64_extract_return_value): Ditto.
        * spu-tdep.c (spu_register_type): Ditto.
        * tracepoint.c (trace_find_command): Ditto.
        * valarith.c (value_pos): Ditto.

2011-01-10  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (printstr): Minor comment reformatting.

2011-01-08  Michael Snyder  <msnyder@vmware.com>

        * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
        markup.

2011-01-08  Michael Snyder  <msnyder@vmware.com>

        * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
        * hppa-hpux-tdep.c: Ditto.
        * hppa-linux-nat.c: Ditto.
        * hppa-linux-tdep.c: Ditto.
        * hppanbsd-tdep.c: Ditto.
        * hppa-tdep.c: Ditto.
        * hppa-tdep.h: Ditto.
        * hpux-thread.c: Ditto.
        * i386-cygwin-tdep.c: Ditto.
        * i386-darwin-nat.c: Ditto.
        * i386gnu-nat.c: Ditto.
        * i386-linux-nat.c: Ditto.
        * i386-linux-tdep.c: Ditto.
        * i386-nat.c: Ditto.
        * i386-nat.h: Ditto.
        * i386nbsd-tdep.c: Ditto.
        * i386-sol2-nat.c: Ditto.
        * i386-stub.c: Ditto.
        * i386-tdep.c: Ditto.
        * i386-tdep.h: Ditto.
        * i387-tdep.c: Ditto.
        * ia64-linux-nat.c: Ditto.
        * ia64-linux-tdep.c: Ditto.
        * ia64-tdep.c: Ditto.
        * infcall.c: Ditto.
        * infcall.h: Ditto.
        * infcmd.c: Ditto.
        * inferior.c: Ditto.
        * inferior.h: Ditto.
        * infloop.c: Ditto.
        * inflow.c: Ditto.
        * infrun.c: Ditto.
        * interps.c: Ditto.
        * interps.h: Ditto.
        * iq2000-tdep.c: Ditto.
        * irix5-nat.c: Ditto.
        * jit.c: Ditto.
        * jit.h: Ditto.
        * jv-exp.y: Ditto.
        * jv-lang.c: Ditto.
        * jv-lang.h: Ditto.
        * jv-typeprint.c: Ditto.
        * jv-valprint.c: Ditto.
        * language.c: Ditto.
        * language.h: Ditto.
        * linespec.c: Ditto.
        * linux-fork.c: Ditto.
        * linux-nat.c: Ditto.
        * linux-thread-db.c: Ditto.
        * lm32-tdep.c: Ditto.

2011-01-08  Michael Snyder  <msnyder@vmware.com>

        * m2-exp.y: Comment cleanup, mostly periods and spaces.
        * m2-lang.c: Ditto.
        * m2-typeprint.c: Ditto.
        * m2-valprint.c: Ditto.
        * m32c-tdep.c: Ditto.
        * m32r-linux-nat.c: Ditto.
        * m32r-rom.c: Ditto.
        * m32r-tdep.c: Ditto.
        * m32r-tdep.h: Ditto.
        * m68hc11-tdep.c: Ditto.
        * m58klinux-nat.c: Ditto.
        * m68k-tdep.c: Ditto.
        * m88k-tdep.c: Ditto.
        * m88k-tdep.h: Ditto.
        * machoread.c: Ditto.
        * macrocmd.c: Ditto.
        * macroexp.c: Ditto.
        * macrotab.c: Ditto.
        * main.c: Ditto.
        * maint.c: Ditto.
        * mdebugread.c: Ditto.
        * mdebugread.h: Ditto.
        * memattr.c: Ditto.
        * memattr.h: Ditto.
        * memory-map.h: Ditto.
        * mep-tdep.c: Ditto.
        * microblaze-rom.c: Ditto.
        * microblaze-tdep.c: Ditto.
        * minsyms.c: Ditto.
        * mips-irix-tdep.c: Ditto.
        * mips-linux-nat.c: Ditto.
        * mips-linux-tdep.c: Ditto.
        * mips-linux-tdep.h: Ditto.
        * mipsnbsd-nat.c: Ditto.
        * mipsnbsd-tdep.c: Ditto.
        * mipsread.c: Ditto.
        * mips-tdep.c: Ditto.
        * mips-tdep.h: Ditto.
        * mn10300-linux-tdep.c: Ditto.
        * mn10300-tdep.c: Ditto.
        * mn10300-tdep.h: Ditto.
        * monitor.c: Ditto.
        * monitor.h: Ditto.
        * moxie-tdep.c: Ditto.
        * moxie-tdep.h: Ditto.
        * mt-tdep.c: Ditto.

2011-01-08  Mike Frysinger  <vapier@gentoo.org>

        * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.

2011-01-08  Robert Millan  <rmh@gnu.org>

        * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.

2011-01-07  Michael Snyder  <msnyder@vmware.com>

        * charset.c (_initialize_charset): Fix typo in string.

2011-01-07  Michael Snyder  <msnyder@vmware.com>

        * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
        for i18n.
        * tui/tui-layout.c (tui_set_layout_for_display_command):
        Split line so that operator goes to beginning of line.
        * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
        assignment out of if statement.

2011-01-07  Michael Snyder  <msnyder@vmware.com>

        * ada-lang.c: Comment cleanup, mostly periods and spaces.
        * ada-lang.h: Ditto.
        * ada-tasks.c: Ditto.
        * ada-valprint.c: Ditto.
        * aix-threads.c: Ditto.
        * alpha-linux-nat.c: Ditto.
        * alpha-linux-tdep.c: Ditto.
        * alpha-mdebug-tdep.c: Ditto.
        * alpha-nat.c: Ditto.
        * alpha-osf1-tdep.c: Ditto.
        * alpha-tdep.c: Ditto.
        * alphabsd-nat.c: Ditto.
        * alphabsd-tdep.c: Ditto.
        * amd64-darwin-tdep.c: Ditto.
        * amd64-linux-nat.c: Ditto.
        * amd64-linux-tdep.c: Ditto.
        * amd64-sol2-tdep.c: Ditto.
        * amd64-tdep.c: Ditto.
        * amd64-fbsd-tdep.c: Ditto.
        * amd64-nbsd-tdep.c: Ditto.
        * amd64-obsd-tdep.c: Ditto.
        * amd64-linux-nat.c: Ditto.
        * amd64-linux-tdep.c: Ditto.
        * arm-tdep.c: Ditto.
        * arm-tdep.h: Ditto.
        * armnbsd-nat.c: Ditto.
        * avr-tdep.c: Ditto.
        * bfin-tdep.c: Ditto.
        * bsd-kvm.c: Ditto.
        * c-typeprintc: Ditto.
        * c-valprint.c: Ditto.
        * coff-pe-read.h: Ditto.
        * coffreead.c: Ditto.
        * cris-tdep.c: Ditto.
        * d-lang.c: Ditto.
        * darwin-nat-info.c: Ditto.
        * darwin-nat.c: Ditto.
        * dbug-rom.c: Ditto.
        * dbxread.c: Ditto.
        * dcache.c: Ditto.
        * dcache.h: Ditto.
        * dec-thread.c: Ditto.
        * defs.h: Ditto.
        * demangle.c: Ditto.
        * dicos-tdep.c: Ditto.
        * dictionary.c: Ditto.
        * dictionary.h: Ditto.
        * dink32-rom.c: Ditto.
        * disasm.c: Ditto.
        * doublest.c: Ditto.
        * dsrec.c: Ditto.
        * dummy-frame.c: Ditto.
        * dwarf2-frame.c: Ditto.
        * dwarf2expr.c: Ditto.
        * dwarf2loc.c: Ditto.
        * dwarf2read.c: Ditto.
        * elfread.c: Ditto.
        * environ.c: Ditto.
        * eval.c: Ditto.
        * event-top.h: Ditto.
        * exceptions.c: Ditto.
        * exceptions.h: Ditto.
        * exec.c: Ditto.
        * expprint.c: Ditto.
        * expression.h: Ditto.
        * f-exp.y: Ditto.
        * f-lang.c: Ditto.
        * f-lang.h: Ditto.
        * f-typeprint.c: Ditto.
        * f-valprint.c: Ditto.
        * fbsd-nat.c: Ditto.
        * findvar.c: Ditto.
        * fork-child.c: Ditto.
        * frame.c: Ditto.
        * frame.h: Ditto.
        * frv-linux-tdep.c: Ditto.
        * frv-tdep.c: Ditto.
        * gcore.c: Ditto.
        * gdb-stabs.h: Ditto.
        * gdb_assert.h: Ditto.
        * gdb_string.h: Ditto.
        * gdb_thread_db.h: Ditto.
        * gdb_wait.h: Ditto.
        * gdbarch.sh: Ditto.
        * gdbcore.h: Ditto.
        * gdbthread.h: Ditto.
        * gdbtypes.c: Ditto.
        * gdbtypes.h: Ditto.
        * gnu-nat.c: Ditto.
        * gnu-nat.h: Ditto.
        * gnu-v2-abi.c: Ditto.
        * gnu-v3-abi.c: Ditto.
        * go32-nat.c: Ditto.
        * gdbarch.c: Regenerate.
        * gdbarch.h: Regenerate.

2011-01-07  Michael Snyder  <msnyder@vmware.com>

        * ax-gdb.c: Adjust some long output strings.
        * breakpoint.c: Ditto.
        * charset.c: Ditto.
        * cp-abi.c: Ditto.
        * infcall.c: Ditto.
        * infrun.c: Ditto.
        * linux-nat.c: Ditto.
        * solib-pa64.c: Ditto.
        * solib-som.c: Ditto.

2011-01-06  Tom Tromey  <tromey@redhat.com>

        PR python/12367:
        * NEWS: Add item.
        * python/python.c (GdbMethods): Add "newest_frame" method.
        * python/python-internal.h (gdbpy_newest_frame): Declare.
        * python/py-frame.c (gdbpy_newest_frame): New function.

2010-01-06  Paul Pluzhnikov  <ppluzhnikov@google.com>

        * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
        * jit.c (jit_debug): New variable.
        (show_jit_debug): New function.
        (struct target_buffer): Use ULONGEST.
        (bfd_open_from_target_memory): Likewise.
        (jit_register_code, jit_inferior_init): Add debug output.
        (_initialize_jit): Register "debug jit" command.

2011-01-06  Tom Tromey  <tromey@redhat.com>

        * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
        * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
        and ARCH_FRAME.

2011-01-06  Tom Tromey  <tromey@redhat.com>

        * python/py-frame.c (frapy_block): Use get_frame_block.

2011-01-06  Joel Brobecker  <brobecker@adacore.com>

        Do not stop on SIGPRIO signals by default
        * infrun.c (_initialize_infrun): Unset signal_stop and
        signal_print for TARGET_SIGNAL_PRIO.

2011-01-06  Joel Brobecker  <brobecker@adacore.com>

        * ada-tasks.c: Fix style violation in comment.

2011-01-06  Joel Brobecker  <brobecker@adacore.com>

        * linespec.c (decode_compound, find_method): Remove trailing \n
        at end of error string.
        * solib-irix.c (irix_current_sos): Likewise.
        * varobj.c (uninstall_variable): Likewise.

2011-01-06  Joel Brobecker  <brobecker@adacore.com>

        * copyright.py: New script.
        * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
        Launch emacs without exec'ing. Call copyright.py afterwards.

2011-01-05  Michael Snyder  <msnyder@vmware.com>

        * addrmap.c: Shorten lines of >= 80 columns.
        * arch-utils.c: Ditto.
        * arch-utils.h: Ditto.
        * ax-gdb.c: Ditto.
        * ax-general.c: Ditto.
        * bcache.c: Ditto.
        * blockframe.c: Ditto.
        * breakpoint.c: Ditto.
        * buildsym.c: Ditto.
        * c-lang.c: Ditto.
        * c-typeprint.c: Ditto.
        * charset.c: Ditto.
        * coffread.c: Ditto.
        * command.h: Ditto.
        * corelow.c: Ditto.
        * cp-abi.c: Ditto.
        * cp-namespace.c: Ditto.
        * cp-support.c: Ditto.
        * dbug-rom.c: Ditto.
        * dbxread.c: Ditto.
        * defs.h: Ditto.
        * dfp.c: Ditto.
        * dfp.h: Ditto.
        * dictionary.c: Ditto.
        * disasm.c: Ditto.
        * doublest.c: Ditto.
        * dwarf2-frame.c: Ditto.
        * dwarf2expr.c: Ditto.
        * dwarf2loc.c: Ditto.
        * dwarf2read.c: Ditto.
        * elfread.c: Ditto.
        * eval.c: Ditto.
        * event-loop.c: Ditto.
        * event-loop.h: Ditto.
        * exceptions.h: Ditto.
        * exec.c: Ditto.
        * expprint.c: Ditto.
        * expression.h: Ditto.
        * f-lang.c: Ditto.
        * f-valprint.c: Ditto.
        * findcmd.c: Ditto.
        * frame-base.c: Ditto.
        * frame-unwind.c: Ditto.
        * frame-unwind.h: Ditto.
        * frame.c: Ditto.
        * frame.h: Ditto.
        * gcore.c: Ditto.
        * gdb-stabs.h: Ditto.
        * gdb_assert.h: Ditto.
        * gdb_dirent.h: Ditto.
        * gdb_obstack.h: Ditto.
        * gdbcore.h: Ditto.
        * gdbtypes.c: Ditto.
        * gdbtypes.h: Ditto.
        * inf-ttrace.c: Ditto.
        * infcall.c: Ditto.
        * infcmd.c: Ditto.
        * inflow.c: Ditto.
        * infrun.c: Ditto.
        * inline-frame.h: Ditto.
        * language.c: Ditto.
        * language.h: Ditto.
        * libunwind-frame.c: Ditto.
        * libunwind-frame.h: Ditto.
        * linespec.c: Ditto.
        * linux-nat.c: Ditto.
        * linux-nat.h: Ditto.
        * linux-thread-db.c: Ditto.
        * machoread.c: Ditto.
        * macroexp.c: Ditto.
        * macrotab.c: Ditto.
        * main.c: Ditto.
        * maint.c: Ditto.
        * mdebugread.c: Ditto.
        * memattr.c: Ditto.
        * minsyms.c: Ditto.
        * monitor.c: Ditto.
        * monitor.h: Ditto.
        * objfiles.c: Ditto.
        * objfiles.h: Ditto.
        * osabi.c: Ditto.
        * p-typeprint.c: Ditto.
        * p-valprint.c: Ditto.
        * parse.c: Ditto.
        * printcmd.c: Ditto.
        * proc-events.c: Ditto.
        * procfs.c: Ditto.
        * progspace.c: Ditto.
        * progspace.h: Ditto.
        * psympriv.h: Ditto.
        * psymtab.c: Ditto.
        * record.c: Ditto.
        * regcache.c: Ditto.
        * regcache.h: Ditto.
        * remote-fileio.c: Ditto.
        * remote.c: Ditto.
        * ser-mingw.c: Ditto.
        * ser-tcp.c: Ditto.
        * ser-unix.c: Ditto.
        * serial.c: Ditto.
        * serial.h: Ditto.
        * solib-frv.c: Ditto.
        * solib-irix.c: Ditto.
        * solib-osf.c: Ditto.
        * solib-pa64.c: Ditto.
        * solib-som.c: Ditto.
        * solib-sunos.c: Ditto.
        * solib-svr4.c: Ditto.
        * solib-target.c: Ditto.
        * solib.c: Ditto.
        * somread.c: Ditto.
        * source.c: Ditto.
        * stabsread.c: Ditto.
        * stabsread.c: Ditto.
        * stack.c: Ditto.
        * stack.h: Ditto.
        * symfile-mem.c: Ditto.
        * symfile.c: Ditto.
        * symfile.h: Ditto.
        * symmisc.c: Ditto.
        * symtab.c: Ditto.
        * symtab.h: Ditto.
        * target-descriptions.c: Ditto.
        * target-memory.c: Ditto.
        * target.c: Ditto.
        * target.h: Ditto.
        * terminal.h: Ditto.
        * thread.c: Ditto.
        * top.c: Ditto.
        * tracepoint.c: Ditto.
        * tracepoint.h: Ditto.
        * ui-file.c: Ditto.
        * ui-file.h: Ditto.
        * ui-out.h: Ditto.
        * user-regs.c: Ditto.
        * user-regs.h: Ditto.
        * utils.c: Ditto.
        * valarith.c: Ditto.
        * valops.c: Ditto.
        * valprint.c: Ditto.
        * valprint.h: Ditto.
        * value.c: Ditto.
        * varobj.c: Ditto.
        * varobj.h: Ditto.
        * vec.h: Ditto.
        * xcoffread.c: Ditto.
        * xcoffsolib.c: Ditto.
        * xcoffsolib.h: Ditto.
        * xml-syscall.c: Ditto.
        * xml-tdesc.c: Ditto.

2011-01-05  Michael Snyder  <msnyder@vmware.com>

        * cli/cli-cmds.c: Shorten lines of >= 80 columns.
        * cli/cli-decode.c: Ditto.
        * cli/cli-dump.c: Ditto.
        * cli/cli-logging.c: Ditto.
        * cli/cli-script.c: Ditto.
        * cli/cli-setshow.c: Ditto.
        * common/signals.c: Ditto.
        * mi/mi-cmd-break.c: Ditto.
        * mi/mi-cmd-disas.c: Ditto.
        * mi/mi-cmd-stack.c: Ditto.
        * mi/mi-cmd-var.c: Ditto.
        * mi/mi-cmds.c: Ditto.
        * mi/mi-common.h: Ditto.
        * mi/mi-console.c: Ditto.
        * mi/mi-interp.c: Ditto.
        * mi/mi-main.c: Ditto.
        * osf-share/cma_attr.c: Ditto.
        * osf-share/cma_deb_core.h: Ditto.
        * osf-share/cma_debug_client.h: Ditto.
        * osf-share/cma_handle.h: Ditto.
        * osf-share/cma_mutex.h: Ditto.
        * osf-share/cma_stack_int.h: Ditto.
        * osf-share/cma_tcb_defs.h: Ditto.
        * python/py-auto-load.c: Ditto.
        * python/py-breakpoint.c: Ditto.
        * python/py-cmd.c: Ditto.
        * python/py-frame.c: Ditto.
        * python/py-objfile.c: Ditto.
        * python/py-param.c: Ditto.
        * python/py-progspace.c: Ditto.
        * python/py-symbol.c: Ditto.
        * python/py-value.c: Ditto.
        * python/python-internal.h: Ditto.
        * python/python.c: Ditto.
        * tui/tui-data.c: Ditto.
        * tui/tui-disasm.c: Ditto.
        * tui/tui-hooks.c: Ditto.
        * tui/tui-io.c: Ditto.
        * tui/tui-layout.c: Ditto.
        * tui/tui-regs.c: Ditto.
        * tui/tui-source.c: Ditto.
        * tui/tui-stack.c: Ditto.
        * tui/tui-win.c: Ditto.
        * tui/tui-windata.c: Ditto.
        * tui/tui-winsource.c: Ditto.

2011-01-05  Joel Brobecker  <brobecker@adacore.com>

        * configure.ac, gdb.1: Copyright year update.

2011-01-03  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
        this_pc_in_block, morestack_msym and morestack_name.  Check for
        "__morestack" minimal symbol there.

2011-01-03  Joel Brobecker  <brobecker@adacore.com>

        * symfile.c (find_sym_fns): Add call to dont_repeat.

2011-01-01  Joel Brobecker  <brobecker@adacore.com>

        Copyright year update in most files (performed by copyright.sh).

2011-01-01  Joel Brobecker  <brobecker@adacore.com>

        * top.c (print_gdb_version): Update copyright year in version output.

For older changes see ChangeLog-2010.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: