1 2008-03-14 Pedro Alves <pedro@codesourcery.com>
3 * features/library-list.dtd: Allow "section" elements as children
4 of "library". Add "section" element and describe its attributes.
6 * solib-target.c (struct lm_info): Add section_bases member.
7 (library_list_start_segment): Error out if seen a section element.
8 (library_list_start_section): New.
9 (library_list_end_library): New.
10 (solib_target_free_library_list): Free section_bases.
11 (section_attributes): New.
12 (library_children): Make "segment" optional. Add "section" child.
13 (library_list_children): Register library_list_end_library.
14 (solib_target_relocate_section_addresses): Handle section bases.
16 * NEWS: Mention new qXfer:libraries:read section offsets support.
18 2008-03-14 Vladimir Prus <vladimir@codesourcery.com>
20 * defs.h (do_exec_error_cleanups, discard_exec_error_cleanups)
21 (make_exec_error_cleanup): Remove declarations.
22 * utils.c (exec_error_cleanup_chain): Remove.
23 (do_exec_error_cleanups, discard_exec_error_cleanups)
24 (make_exec_error_cleanup): Remove.
25 * event-loop.c (start_event_loop): Adjust call to
27 * event-top.c (async_enable_stdin): Remove the paramater dummy.
28 (async_disable_stdin): Don't register async_enable_stdin via
30 * inf-loop.c (inferior_event_handler): Don't
31 call do_exec_error_cleanups. Call async_enable_stdin instead.
32 * event-loop.c (start_event_loop): Adjust call to
34 * tui/tui-interp.c (tui_command_loop): Adjust call to
37 2008-03-14 Vladimir Prus <vladimir@codesourcery.com>
40 * Makefile.in (infcmd.o, inf-loop.o): Update dependencies.
41 * breakpoint.c (bpstat_do_actions): In async mode,
42 don't jump to top expecting stop_bpstat to be already
44 * event-loop.c (start_event_loop): Call async_enable_stdin
46 * event-top.c (async_enable_stdin): Do nothing if sync_execution
48 (command_handler): Do not setup continuation here.
49 (command_line_handler_continuation): Move to...
50 * top.c (command_line_handler_continuation): ... here.
51 (execute_command): In async mode, register continuation.
52 Don't check frame's language in running in async mode.
53 * exceptions.c (throw_exception): Don't do exec_error_cleanups.
54 * inf-loop.c (complete_execution): Inline into...
55 (inferior_event_handler): ... here. Clear target_executing before
56 doing any cleanups. Don't try to show prompt if the target was
58 * infcmd.c (signal_command): Add support for async mode.
59 (finish_command): Only add continuation if the target was
61 * remote.c (init_async_opts): Register to_get_thread_local_address
63 * mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess
65 * tui/tui-interp.c (tui_command_loop): Call async_enable_stdin
68 2008-03-14 Daniel Jacobowitz <dan@codesourcery.com>
70 * corefile.c (reopen_exec_file): Use exec_bfd_mtime.
71 * exec.c (exec_bfd_mtime): Define.
72 (exec_close): Clear it.
73 (exec_file_attach): Set it.
74 * gdbcore.h (exec_bfd_mtime): Declare.
75 * source.c (find_source_lines): Do not use bfd_get_mtime.
77 2008-03-14 Vladimir Prus <vladimir@codesourcery.com>
79 * top.c (simplified_command_loop): Remove.
81 2008-03-14 Vladimir Prus <vladimir@codesourcery.com>
83 Remove unused remote.c hooks.
84 * remote.c (deprecated_target_resume_hook)
85 (deprecated_target_wait_loop_hook): Remove.
86 (remote_resume): Do not call deprecated_target_resume_hook.
87 (remote_wait): Do not call deprecated_target_wait_loop_hook.
88 (remote_async_wait): Likewise.
90 2008-03-14 Vladimir Prus <vladimir@codesourcery.com>
92 Implement MI notification for new threads.
93 * doc/observer.texi (new_thread): Document.
94 * observer.sh: Forward declare struct thread_info.
95 * thread.c (add_thread): Notify observer.
97 * interps.h (interp_init_ftype): New parameter
99 (interp_set): Likewise.
100 (top_level_interpreter_data): Declare.
101 * interps.c (interp_set): New parameter top_level.
102 Pass it to interpreter's init function. Remember
103 top level interpreter.
104 (interpreter_exec_cmd): Adjust.
105 (top_level_interpreter_data): New.
106 * main.c (captured_main): Pass 1 for top_level
107 parameter of interp_set.
108 * cli/cli-interp.c (cli_interpreter_init): New
110 * tui/tui-interp.c (tui_init): New parameter top_level.
112 * mi/mi-interp.c (mi_new_thread): New.
113 (mi_interpreter_init): If top level, register
114 observer for new threads.
116 * Makefile.in (mi-interp.o, thread.o): Update dependencies.
118 2008-03-14 Pedro Alves <pedro@codesourcery.com>
120 * top.c (execute_command): Disable break and stop
121 commands in async mode.
123 2008-03-14 Pedro Alves <pedro@codesourcery.com>
126 2008-03-14 Pedro Alves <pedro@codesourcery.com>
127 * inf-loop.c (inferior_event_handler): Don't include remote.h.
128 Call target_stop in the INF_QUIT_REQ case.
129 * Makefile.in (inf-loop.o): Update.
131 2008-03-14 Pedro Alves <pedro@codesourcery.com>
133 * inf-loop.c (inferior_event_handler): Don't include remote.h.
134 Call target_stop in the INF_QUIT_REQ case.
135 * Makefile.in (inf-loop.o): Update.
137 2008-03-14 Pedro Alves <pedro@codesourcery.com>
139 * top.c (execute_command): Enable break, info and interrupt
140 commands in async mode.
142 2008-03-13 Vladimir Prus <vladimir@codesourcery.com>
143 Daniel Jacobowitz <dan@codesourcery.com>
145 * breakpoint.h (breakpoint_restore_shadows): New
147 * breakpoint.c (breakpoint_restore_shadows): New.
148 (read_memory_nobpt): Delete.
149 * gdbcore.h (read_memory_nobpt): Delete declaration.
150 * target.c (memory_xfer_partial): Call
151 breakpoint_restore_shadows.
152 (restore_show_memory_breakpoints)
153 (make_show_memory_beakpoints_cleanup): New.
154 (show_memory_breakpoints): New.
155 * target.h (make_show_memory_beakpoints_cleanup): Declare.
156 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint):
157 Make sure we see memory breakpoints when checking if
158 breakpoint is still there.
159 * alpha-tdep.c, alphanbsd-tdep.c, frame.c, frv-tdep.c,
160 hppa-linux-tdep.c, hppa-tdep.c, i386-linux-nat.c, i386-tdep.c,
161 m68klinux-tdep.c, mips-tdep.c, mn10300-tdep.c, s390-tdep.c,
162 sparc-tdep.c: Use target_read_memory instead of read_memory_nobpt.
164 2008-03-12 Pedro Alves <pedro@codesourcery.com>
166 * thread.c (add_thread): Use printf_unfiltered to print.
168 2008-03-12 Joel Brobecker <brobecker@gnat.com>
170 * sol-thread.c: Replace use of TM_I386SOL2_H by an expression
171 that is true only on x86-solaris and x86_64-solaris.
172 * procfs.c: Likewise. Move procfs_find_LDT_entry up together
173 with proc_get_LDT_entry.
175 2008-03-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
177 * configure.ac (AC_CHECK_FUNCS): Add check for setsid.
178 * config.in, configure: Regenerate.
179 * fork-child.c (fork_inferior): Call create_tty_session.
180 * inflow.c (new_tty): Set controlling terminal with TIOCSCTTY.
181 (create_tty_session): New function.
182 * terminal.h: Declare create_tty_session.
184 2008-03-12 Alan Modra <amodra@bigpond.net.au>
187 * elfread.c (elf_symtab_read): Make shndx an unsigned int.
188 * mipsread.c: Include elf/internal.h.
189 (read_alphacoff_dynamic_symtab): Map external reserved sym_shndx
192 2008-03-11 Markus Deuling <deuling@de.ibm.com>
194 * win32-nat.c (do_win32_fetch_inferior_registers): Use get_regcache_arch
195 to get at the current architecture and at the target specific vector.
196 Add target specific vector to I387_FISEG_REGNUM and I387_FOP_REGNUM and
197 remove define of I387_ST0_REGNUM.
199 * amd64-tdep.c (I387_ST0_REGNUM): Remove define.
201 (amd64_supply_fxsave, amd64_collect_fxsave): Use get_regcache_arch to
202 get at the current architecture
203 (I387_FISEG_REGNUM, I387_FOSEG_REGNUM): Add target specific vector as
206 * i386-tdep.c: Remove various define's and undef's of I387_ST0_REGNUM,
207 I387_NUM_XMM_REGS and I387_MM0_REGNUM.
209 (I387_NUM_XMM_REGS, I387_XMM0_REGNUM, I387_MXCSR_REGNUM,
210 I387_ST0_REGNUM, I387_FCTRL_REGNUM, I387_MM0_REGNUM,
211 (I387_FSTAT_REGNUM): Add target specific vector as parameter.
213 (i386_register_name, i386_dbx_reg_to_regnum): Use gdbarch_tdep to get
214 at the target specific vector.
216 (i386_get_longjmp_target): Use get_frame_arch to get at the current
217 architecture. Use gdbarch_tdep to get at the target specific vector.
219 (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as parameter and
220 update caller. Use gdbarch_tdep to get at the target specific vector.
222 (i386_register_to_value: Use get_frame_arch to get at the current
225 * i386-tdep.h (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as
228 * i387-tdep.c (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
229 I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM
230 I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_ST0_REGNUM, FSAVE_ADDR,
231 FXSAVE_ADDR, I387_XMM0_REGNUM): Add target specific vector as parameter.
233 (I387_ST0_REGNUM, I387_NUM_XMM_REGS): Remove various define's and
236 (i387_convert_register_p, i387_register_to_value,
237 i387_value_to_register): Update call for i386_fp_regnum_p.
239 * i387-tdep.h: Remove comment.
240 (I387_ST0_REGNUM, I387_NUM_XMM_REGS, I387_MM0_REGNUM): Add define.
241 (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
242 I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM,
243 I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_XMM0_REGNUM,
244 I387_MXCSR_REGNUM): Add target specific vector as parameter.
246 2008-03-10 Daniel Jacobowitz <dan@codesourcery.com>
248 * Makefile.in (fork-child.o): Update.
249 * NEWS: Document "set exec-wrapper" and the gdbserver --wrapper
250 argument. Gather all gdbserver features together.
251 * fork-child.c (exec_wrapper): New variable.
252 (fork_inferior): Use it.
253 (startup_inferior): Skip an extra trap if using "set exec-wrapper".
254 (unset_exec_wrapper_command, _initialize_fork_child): New.
256 2008-03-10 Hidetaka Takano <hidetaka.takano@glb.toshiba.co.jp>
258 * source.c (directory_command): Modify the determination of
259 condition of terminal "from_tty".
261 2008-03-10 Matt Rice <ratmice@gmail.com>
263 * dwarf2read.c (set_cu_language): Add DW_LANG_ObjC.
265 2008-03-10 Hidetaka Takano <hidetaka.takano@glb.toshiba.co.jp>
267 * spu-tdep.c (info_spu_event_command): Insert a '\0' to the end
268 of the data passing to strtoulst function.
269 (info_spu_signal_command): Likewise.
271 2008-03-08 Vladimir Prus <vladimir@codesourcery.com>
273 * mi/mi-interp.c (mi_command_loop): Remove
276 2008-03-07 Joel Brobecker <brobecker@adacore.com>
278 * remote.c (extended_remote_attach_1): Make local variable pid an int
281 2008-03-07 Joel Brobecker <brobecker@adacore.com>
283 * solib-svr4.c (svr4_same_1): New function, originally extracted
284 from svr4_same and expanded to handle the sparc64 case.
285 (svr4_same): Move up and reimplement using svr4_same_1.
286 (enable_break): Use svr4_same_1 to do shared library name comparisons.
288 2008-03-07 Ramana Radhakrishnan <ramana.r@gmail.com>
290 * MAINTAINERS: Move self to Paper trail.
292 2008-03-05 Daniel Jacobowitz <dan@codesourcery.com>
294 * Makefile.in (mingw-hdep.o, posix-hdep.o, remote-fileio.o): Update.
295 * event-loop.c (call_async_signal_handler): New.
296 * event-loop.h (call_async_signal_handler)
297 (gdb_call_async_signal_handler): Declare.
298 (mark_async_signal_handler): Add comments.
299 * event-top.c (handle_sigint): Use gdb_call_async_signal_handler.
300 * mingw-hdep.c (sigint_event, sigint_handler): New.
301 (gdb_select): Use them. Wait for the readline signal handler
303 (gdb_call_async_signal_handler, _initialize_mingw_hdep): New functions.
304 * posix-hdep.c (gdb_call_async_signal_handler): New function.
305 * remote-fileio.c (sigint_fileio_token, async_remote_fileio_interrupt):
307 (remote_fileio_ctrl_c_signal_handler): Use
308 gdb_call_async_signal_handler.
309 (initialize_remote_fileio): Initialize sigint_fileio_token.
310 * remote.c (initialize_sigint_signal_handler, handle_remote_sigint): Do
311 not initialize tokens here.
312 (handle_remote_sigint_twice): Likewise. Reinstall
313 handle_remote_sigint.
314 (async_remote_interrupt_twice): Just call interrupt_query.
315 (cleanup_sigint_signal_handler): Do not delete tokens.
316 (remote_interrupt, remote_interrupt_twice): Use
317 gdb_call_async_signal_handler.
318 (interrupt_query): Reinstall the default signal handler.
319 (_initialize_remote): Initialize tokens here.
321 2008-03-04 Joel Brobecker <brobecker@adacore.com>
323 * features/rs6000/power-core.xml, features/rs6000/power64-core.xml,
324 features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
325 Change the type of the lr register to code_ptr.
326 * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
327 features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
328 features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
329 features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
330 features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
331 features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
332 features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c: Regenerate.
334 2008-03-03 James E. Wilson <wilson@tuliptree.org>
336 * MAINTAINERS: Update my email address.
338 2008-03-03 Keith Seitz <keiths@redhat.com>
340 From Dave Murphy <davem@devkitpro.org>:
341 * configure.ac: Set tcl configdir to win under mingw.
342 * configure: Regenerate.
344 2008-03-03 Daniel Jacobowitz <dan@codesourcery.com>
346 * breakpoint.c (fetch_watchpoint_value): New function.
347 (update_watchpoint): Set and clear val_valid. Use
348 fetch_watchpoint_value. Handle unreadable values on the
349 value chain. Correct check for user-requested array watchpoints.
350 (breakpoint_init_inferior): Clear val_valid.
351 (watchpoint_value_print): New function.
352 (print_it_typical): Use it. Do not free or clear old_val. Print
353 watchpoints even if old_val == NULL.
354 (watchpoint_check): Use fetch_watchpoint_value. Check for values
355 becoming readable or unreadable.
356 (watch_command_1): Use fetch_watchpoint_value. Set val_valid.
357 (do_enable_watchpoint): Likewise.
358 * breakpoint.h (struct breakpoint): Update comment for val. Add
360 * NEWS: Mention watchpoints on inaccessible memory.
362 2007-02-29 Daniel Jacobowitz <dan@codesourcery.com>
364 * Makefile.in (i386-nat.o): Update.
365 * amd64-linux-nat.c (_initialize_amd64_linux_nat): Call
366 i386_use_watchpoints.
367 * i386-linux-nat.c (_initialize_i386_linux_nat): Call
368 i386_use_watchpoints.
369 * i386-nat.c (i386_stopped_data_address): Take two arguments.
370 (i386_stopped_by_watchpoint): Update call.
371 (i386_can_use_hw_breakpoint, i386_use_watchpoints): New.
372 * config/i386/nm-i386.h: Conditionalize definitions on
373 ! I386_WATCHPOINTS_IN_TARGET_VECTOR.
374 (i386_use_watchpoints): Declare.
375 (i386_stopped_data_address): Update.
376 * config/i386/nm-linux.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
377 * config/i386/nm-linux64.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
379 2008-02-29 Joel Brobecker <brobecker@adacore.com>
381 GDB 6.8 branch created (branch timestamp: 2008-02-26 10:00 UTC)
382 * version.in: Bump version to 6.8.50.20080229-cvs.
384 2008-02-28 Markus Deuling <deuling@de.ibm.com>
386 * f-typeprint.c (f_print_type): Handle NULL pointer in VARSTRING
389 2008-02-28 Tom Tromey <tromey@redhat.com>
391 * infcmd.c (notice_args_read): Print result of get_inferior_args.
393 2008-02-28 Daniel Jacobowitz <dan@codesourcery.com>
395 * infcmd.c (kill_if_already_running): Make static. Use
396 target_require_runnable.
397 * target.c (target_require_runnable): New.
398 * target.h (target_require_runnable): Declare.
400 2008-02-28 Daniel Jacobowitz <dan@codesourcery.com>
402 * frame.c (reinit_frame_cache): Only annotate if frames were
405 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com>
407 * regformats/reg-ppc.dat: Rename "ps" to "msr".
408 * regformats/reg-ppc64.dat: Likewise.
410 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com>
412 * features/Makefile (%.dat): Emit xmltarget statement.
414 * regformats/regdat.sh: Support xmltarget and xmlarch statments.
415 Generate code to set gdbserver_xmltarget in init_registers_${name}.
417 * regformats/arm-with-iwmmxt.dat: Regenerate.
418 * regformats/mips64-linux.dat: Regenerate.
419 * regformats/mips-linux.dat: Regenerate.
420 * regformats/rs6000/powerpc-32.dat: Regenerate.
421 * regformats/rs6000/powerpc-64.dat: Regenerate.
422 * regformats/rs6000/powerpc-e500.dat: Regenerate.
424 * regformats/reg-arm.dat: Add xmlarch statement.
425 * regformats/reg-i386.dat: Likewise.
426 * regformats/reg-i386-linux.dat: Likewise.
427 * regformats/reg-x86-64-linux.dat: Likewise.
428 * regformats/reg-spu.dat: Likewise.
430 2008-02-27 Daniel Jacobowitz <dan@codesourcery.com>
432 * remote.c (remote_wait, remote_async_wait): Stop if we receive
435 2008-02-27 Daniel Jacobowitz <dan@codesourcery.com>
437 * utils.c (debug_timestamp): New.
438 (vfprintf_unfiltered): Print timestamps if requested.
439 (show_debug_timestamp): New.
440 (initialize_utils): Register "set debug timestamp".
441 * NEWS: Mention "set debug timestamp". Add GDB 6.8 section.
443 2008-02-27 Joel Brobecker <brobecker@adacore.com>
445 * breakpoint.c (skip_prologue_sal): New function.
446 (resolve_sal_pc): Adjust SAL past prologue if the SAL was
447 computed from a line number.
449 2008-02-27 Joel Brobecker <brobecker@adacore.com>
451 * features/rs6000/power-core.xml, features/rs6000/power64-core.xml
452 features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
453 Set PC register type to "code_ptr".
454 * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
455 features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
456 features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
457 features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
458 features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
459 features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
460 features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c:
463 2008-02-27 Ulrich Weigand <uweigand@de.ibm.com>
465 * regformats/regdat.sh: Rename init_registers function in
466 generated file to init_registers_${name}.
468 * regformats/reg-crisv32.dat: Set "name" to crisv32.
469 * regformats/reg-ppc64.dat: Set "name" to ppc64.
470 * regformats/reg-s390x.dat: Set "name" to s390x.
472 2008-02-26 Greg Law <glaw@undo-software.com>
474 * regcache.c (registers_changed): Call reinit_frame_cache.
476 2008-02-26 Daniel Jacobowitz <dan@codesourcery.com>
478 * configure.tgt (sh-*-linux*): Match sh*. Add glibc-tdep.o.
479 * sh-linux-tdep.c (sh_linux_init_abi): Use glibc_skip_solib_resolver
480 and svr4_fetch_objfile_link_map.
481 * Makefile.in (sh-linux-tdep.o): Update.
483 2008-02-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
485 * amd64-tdep.c (amd64_classify): Add support for decimal float
487 * i386-tdep.c (i386_return_value): Make 128-bit decimal float
488 use the struct return convention.
490 2008-02-26 Nick Roberts <nickrob@snap.net.nz>
492 * breakpoint.c (print_one_breakpoint_location): Revert Enb field
493 to old format. Discard breakpoint address if shared library is
495 (breakpoint_1): Adjust formatting of table header accordingly.
497 2008-02-25 Vladimir Prus <vladimir@codesourcery.com>
499 * remote.c (remote_get_threadlist): If the response
500 is empty, don't try to parse it.
502 2008-02-23 Vladimir Prus <vladimir@codesourcery.com>
504 Unbreak 'target async'.
505 * serial.c (serial_async): Set the
506 handler function before enabling async
509 2008-02-22 Daniel Jacobowitz <dan@codesourcery.com>
511 * solib-svr4.c (enable_break): Convert r_brk to a code address.
513 2008-02-21 Pedro Alves <pedro@codesourcery.com>
515 * remote.c (extended_remote_attach_1): Set attach_flag.
516 (extended_remote_create_inferior_1): Clear attach_flag.
518 2008-02-20 Daniel Jacobowitz <dan@codesourcery.com>
520 * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Set
522 (mipsnbsd_lp64_fetch_link_map_offsets): Likewise.
523 * solib-svr4.c (solib_svr4_r_brk): New.
524 (open_symbol_file_object, svr4_current_sos): Always check the
526 (svr4_fetch_objfile_link_map): Do not set debug_base.
527 (enable_break): Use r_brk if it is set.
528 (svr4_ilp32_fetch_link_map_offsets): Set r_brk_offset.
529 (svr4_lp64_fetch_link_map_offsets): Likewise.
530 * solib-svr4.h (struct link_map_offsets): Add r_brk_offset.
532 2008-02-20 Markus Deuling <deuling@de.ibm.com>
533 Mark Kettenis <kettenis@gnu.org>
535 * alpha-tdep.c (alpha_heuristic_unwind_cache): Replace saved_regs by
536 trad_frame_saved_reg.
537 (trad-frame.h): New include.
539 (alpha_heuristic_frame_unwind_cache): Use trad_frame_alloc_saved_regs
540 instead of frame_obstack_zalloc.
541 (alpha_heuristic_frame_prev_register): Use trad_frame_get_prev_register.
543 * Makefile.in (alpha-tdep.o): Add dependency to trad_frame_h.
545 2008-02-20 Markus Deuling <deuling@de.ibm.com>
547 * rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess
548 from disassemble_info instead of gdbarch_byte_order.
550 * mips-tdep.c (gdb_print_insn_mips): Likewise.
551 * arm-tdep.c (gdb_print_insn_arm): Likewise.
553 2008-02-20 Markus Deuling <deuling@de.ibm.com>
555 * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add
556 gdbarch as parameter.
558 * gdbarch.{c,h}: Regenerate.
560 * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as
562 * mem-break.c (default_memory_insert_breakpoint)
563 (default_memory_remove_breakpoint): Likewise.
564 * target.h (default_memory_remove_breakpoint)
565 (default_memory_insert_breakpoint): Likewise.
567 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as
568 parameter. Replace current_gdbarch by gdbarch.
569 * m32r-tdep.c (m32r_memory_insert_breakpoint)
570 (m32r_memory_remove_breakpoint): Likewise.
572 2008-02-19 Daniel Jacobowitz <dan@codesourcery.com>
574 * MAINTAINERS: Add Vladimir Prus as MI maintainer.
576 2008-02-19 Joel Brobecker <brobecker@adacore.com>
578 * NEWS: Add entry describing Add support improvements.
580 2008-02-18 Markus Deuling <deuling@de.ibm.com>
582 * m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by
585 2008-02-18 Markus Deuling <deuling@de.ibm.com>
587 * sentinel-frame.c (sentinel_frame_prev_register): Do not call
588 register_offset_hack anymore.
590 * regcache.{c,h} (register_offset_hack): Remove.
592 2008-02-18 Markus Deuling <deuling@de.ibm.com>
594 * hppa-tdep.h (find_global_pointer): Add gdbarch as parameter.
596 * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace
597 current_gdbarch by gdbarch.
598 (hppa64_hpux_find_global_pointer): Likewise.
599 * hppa-tdep.c (hppa_find_global_pointer): Likewise.
600 (hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for
603 * hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as
605 * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
607 * hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead
610 * hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and
611 replace current_gdbarch by gdbarch.
612 (hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr.
614 2008-02-18 Markus Deuling <deuling@de.ibm.com>
616 * rs6000-nat.c (exec_one_dummy_insn, regmap): Add gdbarch as parameter
617 and replace current_gdbarch by gdbarch.
619 (store_register): Update call for exec_one_dummy_insn.
620 (fetch_register, store_register): Update call of regmap.
622 * ppcnbsd-nat.c (getregs_supplies, getfpregs_supplies): Add gdbarch as
623 parameter and replace current_gdbarch by gdbarch.
625 (ppcnbsd_store_inferior_registers): Use get_regcache_arch to get at
626 the current architecture. Update call for getregs_supplies and
628 (ppcnbsd_fetch_inferior_registers): Likewise.
630 * ppcobsd-nat.c (getfpregs_supplies): Add gdbarch as parameter and
631 replace current_gdbarch by gdbarch.
632 (ppcobsd_fetch_registers, ppcobsd_store_registers): Use
633 get_regcache_arch to get at the current architecture. Update call for
636 2008-02-18 Markus Deuling <deuling@de.ibm.com>
638 * arch-utils.c (gdbarch_from_bfd): Remove unnecessary {old,new}_gdbarch
641 2008-02-15 Markus Deuling <deuling@de.ibm.com>
643 * mips-linux-tdep.c (mips_linux_init_abi): Remove internal error.
645 2008-02-14 Vladimir Prus <vladimir@codesourcery.com>
647 * NEWS: Mention pending breakpints in MI.
649 2008-02-14 Markus Deuling <deuling@de.ibm.com>
651 * Makefile.in (ALL_TARGET_OBS): Remove dependency to xtensa-linux-nat.o.
653 2008-02-13 Markus Deuling <deuling@de.ibm.com>
655 Add script to build and test GDB using enable-targets=all.
657 * gdb_buildall.sh: New file.
659 2008-02-11 Maxim Grigoriev <maxim2405@gmail.com>
661 * NEWS (New native configurations): Xtensa GNU/Linux.
662 (New targets): Xtensa GNU/Linux.
663 * Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
665 (ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
666 (xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
667 * configure.tgt (xtensa*-*-linux*): New entry.
668 * xtensa-config.c (xtensa_tdep): New variable.
669 (xtensa_config_byte_order, xtensa_config_tdep): Removed.
670 (rmap): Change format based on new macro XTREG.
671 (XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
672 * xtensa-linux-nat.c: New.
673 * xtensa-linux-tdep.c: New.
674 * xtensa-xtregs.c: New.
675 * xtensa-tdep.h (xtensa_elf_gregset_t): Update.
676 (XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
677 (XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
678 (xtensa_register_t): New field coprocessor.
679 (XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
680 * xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
681 (xtensa_pseudo_register_read, xtensa_pseudo_register_write):
682 Update to handle privileged registers.
683 (xtensa_supply_gregset) Remove exccause and excvaddr registers.
684 (xtensa_push_dummy_call): Set windowstart register correctly.
685 (call0_analyze_prologue): Initialize xtensa_default_isa.
686 (xtensa_derive_tdep): New.
687 (xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
688 xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
689 Call xtensa_derive_tdep().
690 * config/xtensa/linux.mh: New.
691 * regformats/reg-xtensa.dat: New.
693 2008-02-09 Aleksandar Ristovski <aristovski@qnx.com> (tiny change)
695 * corelow.c (core_open): Use IS_ABSOLUTE_PATH.
696 (filenames.h): New include.
697 * Makefile.in (corelow.o): Add dependency for filenames.h.
699 2008-02-08 Doug Evans <dje@google.com>
701 * source.c (find_and_open_source): Always rewrite absolute filenames.
703 2008-02-07 Doug Evans <dje@google.com>
705 * breakpoint.c: #include "hashtab.h".
706 (ambiguous_names_p): New fn.
707 (update_breakpoint_locations): When restoring bp enable status, don't
708 compare function names if any functions have same name.
709 * Makefile.in (breakpoint.o): Add hashtab.h dependency.
711 2008-02-07 Joel Brobecker <brobecker@adacore.com>
713 * ada-lang.c (symbol_completion_add): Make SV parameter a VEC**
714 instead of just a VEC*. Update use of SV.
715 (ada_make_symbol_completion_list): Update symbol_completion_add calls.
717 2007-02-07 Joel Brobecker <brobecker@adacore.com>
719 * NEWS: Put all new commands since gdb-6.7 together.
721 2007-02-07 Joel Brobecker <brobecker@adacore.com>
723 * ada-lang.c: #include "vec.h".
724 (struct string_vector, new_string_vector, string_vector_append):
726 (char_ptr): New typedef.
727 (DEF_VEC_P (char_ptr)): New VEC type.
728 (symbol_completion_add): Update profile to take the new VEC type
729 instead of the old string_vector structure. Update code accordingly.
730 (ada_make_symbol_completion_list): Use the new VEC type instead of
731 the old string_vector structure, and update the code accordingly.
732 * Makefile.in (ada-lang.o): Add dependency on vec.h.
734 2008-02-06 Pierre Muller <muller@ics.u-strasbg.fr>
736 * p-exp.y: Set current_type in missing places.
737 (leftdiv_is_integer): New static variable.
738 Typecast right operand of BINOP_DIV to long_double if both operands
741 2008-02-06 Maciej W. Rozycki <macro@mips.com>
743 * remote-mips.c (set_breakpoint): Rename to...
744 (mips_set_breakpoint): ... this.
745 (clear_breakpoint): Rename to...
746 (mips_clear_breakpoint): ... this.
747 (common_breakpoint): Rename to...
748 (mips_common_breakpoint): ... this.
749 (check_lsi_error): Rename to...
750 (mips_check_lsi_error): ... this.
752 2007-02-05 Joel Brobecker <brobecker@adacore.com>
754 * language.h (struct language_defn): Add new field
755 la_make_symbol_completion_list.
756 * symtab.c (default_make_symbol_completion_list): Renames
757 make_symbol_completion_list.
758 (make_symbol_completion_list): New function.
759 * symtab.h (default_make_symbol_completion_list): Add declaration.
760 * langauge.c (unknown_language): Set la_make_symbol_completion_list.
761 (auto_language, local_language): Likewise.
762 * objc-lang.c (objc_language_defn): Likewise.
763 * scm-lang.c (scm_language_defn): Likewise.
764 * m2-lang.c (m2_language_defn): Likewise.
765 * f-lang.c (f_language_defn): Likewise.
766 * jv-lang.c (java_language_defn): Likewise.
767 * p-lang.c (pascal_language_defn): Likewise.
768 * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn)
769 (minimal_language_defn): Likewise.
770 * ada-lang.c (struct string_vector): New structure.
771 (new_string_vector, string_vector_append, ada_unqualified_name)
772 (add_angle_brackets, symbol_completion_match, symbol_completion_add)
773 (ada_make_symbol_completion_list): New functions.
774 (ada_language_defn): Set la_make_symbol_completion_list.
775 * ada-lang.h (ada_make_symbol_completion_list): Remove declaration,
776 this function is static.
778 2008-02-05 Kevin Buettner <kevinb@redhat.com>
780 * mn10300-tdep.c (mn10300_push_dummy_call): Adjust stack pointer
781 to account for call site optimizations.
783 2008-02-05 Andrzej Zaborowski <balrogg@gmail.com>
785 * tracepoint.c (read_actions): Handle end-of-text indicator
786 in action list properly. (Committed by Jim Blandy)
788 2008-02-05 Jim Blandy <jimb@red-bean.com>
790 * ax-gdb.c (gen_expr): Yield ordinary error if asked to trace a
791 pseudoregister, not an internal error.
792 Reported by: Andrzej Zaborowski
794 2008-02-04 Vladimir Prus <vladimir@codesourcery.com>
796 * varobj.c (c_value_of_variable): Use xstrdup.
798 2008-02-04 Vladimir Prus <vladimir@codesourcery.com>
800 Update stored rendition of varobj value when format changes.
801 * varobj.c (varobj_set_display_format): Recomputed
803 (c_value_of_variable): Return print_value.
805 2008-02-03 Doug Evans <dje@google.com>
807 * eval.c (evaluate_subexp_standard): Fix type of result of mixed
808 integer/float division operations when EVAL_AVOID_SIDE_EFFECTS.
809 * valops.c (value_one): New function.
810 * value.h (value_one): Declare.
812 Fix argument promotion for binary arithmetic ops for C.
813 * valarith.c (unop_result_type): New fn.
814 (binop_result_type): New fn.
815 (value_binop): Move result type computation to binop_result_type.
816 (value_pos, value_neg, value_complement): Move result type
817 computation to unop_result_type.
820 * gdbtypes.c (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
821 Return basetype, fieldno if found. All callers updated.
822 Don't cache TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE if from different
824 * gdbtypes.h (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
825 * symfile.h (fill_in_vptr_fieldno): Delete.
827 2008-02-02 Doug Evans <dje@google.com>
829 * valarith.c (value_binop): Handle unsigned BINOP_REM division by zero.
831 * typeprint.c (*): Whitespace cleanup.
833 2008-02-02 Mark Kettenis <kettenis@gnu.org>
834 Luis Machado <luisgpm@br.ibm.com>
835 Thiago Jung Bauermann <bauerman@br.ibm.com>
837 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Pass floats that
838 don't fit into registerson the stack the way GCC does.
840 2008-02-01 Joel Brobecker <brobecker@adacore.com>
842 * symtab.c (symbol_set_names): Do not add an entry in the demangling
843 hash table for Ada symbols. Just store the linkage name as is,
844 and leave the demangled_name as NULL.
846 2007-02-01 Joel Brobecker <brobecker@adacore.com>
848 * dwarf2read.c (add_partial_symbol): Always store all Ada subprograms
850 (new_symbol): Likewise.
852 2008-02-01 Vladimir Prus <vladimir@codesourcery.com>
854 * breakpoint.c (break_command_1): Return void.
855 (break_command_really): Return void. Rethrow
856 exceptions instead of returning.
857 (gdb_breakpoint): Remove the error_message parameter.
858 Return void. Rename to set_breakpoint.
859 * gdb.h (gdb_breakpoint): Rename and move to...
860 * breakpoint.h (set_breakpoint): ...here.
861 * mi/mi-cmb-break.c (mi_cmd_break_insert): Restore
862 event hooks even if exception is thrown. Adjust to
863 gdb_breakpoint interface changes.
866 2008-02-01 Thiago Jung Bauermann <bauerman@br.ibm.com>
868 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Write 32-bit
869 float in both first and second word in the doubleword, to support
872 2008-02-01 Vladimir Prus <vladimir@codesourcery.com>
874 Properly rethrow exception. This fixes errors
875 about non-existent functions for -break-insert.
876 * breakpoint.c (break_command_really): Use throw_exception
877 for rethrowing. If rethrowing, don't print the exception.
879 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
881 * NEWS: Mention Decimal Floating Point support.
883 2008-01-31 Joel Brobecker <brobecker@adacore.com>
885 * std-regs.c (value_of_builtin_frame_pc_reg): Change the returned
886 value type to builtin_type_void_func_ptr.
888 2008-01-31 Andreas Krebbel <krebbel1@de.ibm.com>
890 * s390-tdep.c (is_float_singleton, is_float_like,
891 alignment_of, s390_return_value): Make checks for
892 TYPE_CODE_FLT to match TYPE_CODE_DECFLOAT as well.
894 2008-01-31 Luis Machado <luisgpm@br.ibm.com>
895 Thiago Jung Bauermann <bauerman@br.ibm.com>
897 * infcmd.c (default_print_registers_info): Also print hex
898 raw contents for TYPE_CODE_DECFLOAT registers.
899 * ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member.
900 * rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro.
901 (rs6000_register_name): Add support for DFP pseudo-registers.
902 (rs6000_pseudo_register_type): Likewise.
903 rs6000_pseudo_register_reggroup_p): Likewise.
904 (ppc_pseudo_register_read): New function.
905 (ppc_pseudo_register_write): Likewise.
906 (rs6000_pseudo_register_read): Likewise.
907 (rs6000_pseudo_register_write): Likewise.
908 (e500_pseudo_register_read): Move checks to
909 rs6000_pseudo_register_read.
910 (e500_pseudo_register_write): Move checks to
911 rs6000_pseudo_register_write.
912 (rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum. Install
913 rs6000_pseudo_register_read and rs6000_pseudo_register_write
914 in gdbarch if SPE or DFP is available. Adjust gdbarch's
915 num_pseudo_regs to account for DFP pseudo regs.
917 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
919 * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_ev31_regnum member.
920 * rs6000-tdep.c (IS_SPE_PSEUDOREG): New macro.
921 (spe_register_p, rs6000_register_name, rs6000_pseudo_register_type,
922 rs6000_pseudo_register_reggroup_p, e500_move_ev_register,
923 e500_pseudo_register_read, e500_pseudo_register_write): Use
924 IS_SPE_PSEUDOREG macro.
925 (rs6000_frame_cache): Remove use of tdep->ppc_ev31_regnum.
926 (rs6000_gdbarch_init): Remove unnecessary num_sprs local variable.
927 Remove initialization of tdep->ppc_ev31_regnum.
929 2008-01-08 Paul Hilfinger <hilfinger@adacore.com>
931 * printcmd.c (print_formatted): Handle references as for unformatted
934 2008-01-30 Joel Brobecker <brobecker@adacore.com>
936 * eval.c (evaluate_subexp_standard): Add handling of user
937 registers when in EVAL_AVOID_SIDE_EFFECTS mode.
939 2008-01-30 Pierre Muller <muller@ics.u-strasbg.fr>
941 * eval.c (evaluate_subexp_standard): Support
944 2008-01-30 Paul N. Hilfinger <hilfinger@adacore.com>
946 * valarith.c (value_binop): Add floating-point BINOP_MIN and
948 For BINOP_EXP, use length and signedness of left operand only for
949 result, as for shifts.
950 For integral operands to BINOP_EXP, use new integer_pow and
951 uinteger_pow functions so as to get full range of results.
952 (integer_pow): New function.
953 (uinteger_pow): New function.
955 2008-01-30 Vladimir Prus <vladimir@codesourcery.com>
957 Use vector for varobj_list_children interface.
958 * gdb/varobj.c (varobj_list_children): Return vector
960 * gdb/varobj.h (varobj_list_children): Adjust
962 (varobj_p): Declare. Declare vector thereof.
963 * mi/mi-cmd-var.c (mi_cmd_var_list_children): Adjust
964 for varobj_list_children change.
965 * Makefile.in (varobj_h): Update dependencies.
967 2008-01-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
969 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Add support for
970 TYPE_CODE_DECFLOAT arguments.
971 (ppc64_sysv_abi_push_dummy_call) Likewise.
972 (get_decimal_float_return_value): New function.
973 (do_ppc_sysv_return_value): Add support for TYPE_CODE_DECFLOAT return
974 values by calling get_decimal_float_return_value.
975 (ppc64_sysv_abi_return_value): Likewise.
977 2008-01-30 Nick Roberts <nickrob@snap.net.nz>
979 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Add field
980 for preprocessor macro information. Formatting changes.
982 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com>
984 * remote.c (struct remote_state): Add cached_wait_status.
985 (remote_exec_file): New variable.
986 (PACKET_vAttach, PACKET_vRun): New constants.
987 (extended_remote_restart): Do not query for status.
988 (struct start_remote_args): New.
989 (remote_start_remote): Take it as a second argument. Check
990 whether the target is running. Issue an error for non-running
991 non-extended targets. Cache the wait status. Set inferior_ptid
993 (remote_open_1): Prompt to disconnect non-running targets. Make
994 sure the target is marked running. Do not set inferior_ptid here.
995 Update call to remote_start_remote. Do not call remote_check_symbols
996 if the target is not running.
997 (remote_detach_1): Rename from remote_detach. Take an EXTENDED
998 argument. Handle a non-running target.
999 (remote_detach): Use it.
1000 (extended_remote_detach): New.
1001 (remote_disconnect): Fix typo. Use remoute_mourn_1.
1002 (extended_remote_attach_1, extended_remote_attach)
1003 (extended_async_remote_attach): New.
1004 (remote_vcont_resume): Remove unused variable.
1005 (remote_wait, remote_async_wait): Use any cached wait status.
1006 (putpkt_binary, getpkt): Clear any cached wait status.
1007 (extended_remoute_mourn_1): New.
1008 (extended_remote_mourn): Use it.
1009 (extended_async_remote_mourn, extended_remote_run): New.
1010 (extended_remote_create_inferior_1): New.
1011 (extended_remote_create_inferior): Use it.
1012 (extended_remote_async_create_inferior): Likewise.
1013 (remote_xfer_partial): Skip for non-executing targets.
1014 (init_extended_remote_ops): Set to_detach and to_attach.
1015 (init_extended_async_remote_ops): Likewise. Use
1016 extended_async_remote_mourn.
1017 (_initialize_remote): Register vAttach, vRun, and
1018 set remote exec-file.
1019 * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
1021 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com>
1023 * Makefile.in (symfile.o): Update.
1024 * NEWS: Mention exec tracing support.
1025 * inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
1027 * infcmd.c (kill_if_already_running, detach_command)
1028 (disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
1029 * infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
1030 (follow_exec): Do not check may_follow_exec. Do not mourn and push
1031 targets. Apply the sysroot path to the loaded executable. Use
1032 no_shared_libraries.
1033 * linux-nat.c (linux_child_follow_fork): Print fork following
1034 messages if verbose.
1035 (kill_wait_callback): Kill again before waiting a second time.
1036 * symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
1037 no_shared_libraries.
1039 2008-01-29 Joel Brobecker <brobecker@adacore.com>
1041 * amd64-tdep.c (amd64_classify): Add handling of TYPE_CODE_CHAR.
1043 2008-01-29 Joel Brobecker <brobecker@adacore.com>
1045 * nto-tdep.h: Remove #include "defs.h".
1046 * nto-tdep.c: Add #include "defs.h".
1047 * Makefile.in (nto_tdep_h): Update dependencies.
1048 (nto-tdep.o): Likewise.
1050 2008-01-29 Joel Brobecker <brobecker@adacore.com>
1052 * infrun.c (wait_for_inferior): Add treat_exec_as_sigtrap parameter
1054 (proceed, start_remote): Update call to wait_for_inferior.
1055 * inferior.h (wait_for_inferior): Update declaration.
1056 * fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c,
1057 solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior.
1058 * inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as
1059 TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED.
1061 2008-01-29 Aleksandar Ristovski <aristovski@qnx.com>
1063 * varobj (adjust_value_for_child_access): Added checking for
1064 returned value from gdb_value_ind.
1065 (c_describe_child): Likewise.
1066 (cplus_describe_child): Fixed a typo.
1068 2008-01-29 Jim Blandy <jimb@red-bean.com>
1070 * MAINTAINERS: Update my info.
1072 2008-01-29 Vladimir Prus <vladimir@codesourcery.com>
1074 Use multiple locations for hardware watchpoints.
1075 This eliminates the need to traverse value chain, doing
1076 various checks, in three different places.
1078 * breakpoint.h (struct bp_location): New fields
1079 lengths and watchpoint_type.
1080 (struct breakpoint): Remove the val_chain field.
1081 * breakpoint.c (is_hardware_watchpoint): New.
1082 (free_valchain): Remove.
1083 (update_watchpoint): New.
1084 (insert_bp_location): For hardware watchpoint, just
1086 (insert_breakpoints): Call update_watchpoint_locations
1087 on all watchpoints. If we have failed to insert
1088 any location of a hardware watchpoint, remove all inserted
1090 (remove_breakpoint): For hardware watchpoints, directly
1092 (watchpoints_triggered): Iterate over locations.
1093 (bpstat_stop_status): Use only first location of
1094 a resource watchpoint.
1095 (delete_breakpoint): Don't call free_valchain.
1096 (print_one_breakpoint): Don't print all
1097 locations for watchpoints.
1098 (breakpoint_re_set_one): Use update_watchpoint for
1101 2008-01-29 Vladimir Prus <vladimir@codesourcery.com>
1103 Don't reset watchpoint block on solib load.
1105 * breakpoint.c (insert_bp_location): For watchpoints,
1106 recompute condition.
1107 (breakpoint_re_set_one): Instead of recomputing value
1108 and condition for watchpoints, just reset value and
1109 let insert_breakpoints/insert_bp_location recompute it.
1110 Don't do anything about disabled watchpoint.
1112 2008-01-29 Pierre Muller <muller@ics.u-strasbg.fr>
1114 * valarith.c (value_binop): Handle unsigned integer
1117 2008-01-28 Kevin Buettner <kevinb@redhat.com>
1119 * mn10300-tdep.c (mn10300_analyze_prologue): Check for an
1120 instruction pattern that appears frequently in position
1121 independent code. Fix bug in code which looks for "fmov" and
1122 backtracks if no "fmov" is found.
1124 2008-01-28 Doug Evans <dje@google.com>
1126 * dbxread.c (read_dbx_symtab): Fix indentation.
1127 Reformat comments to 80 columns.
1128 Move local var def closer to only use.
1130 2008-01-28 Daniel Jacobowitz <dan@codesourcery.com>
1132 * fork-child.c (SHELL_FILE): Remove #ifndef.
1133 (fork_inferior): Remove SHELL_COMMAND_CONCAT.
1135 2008-01-25 Pierre Muller <muller@ics.u-strasbg.fr>
1137 * i386-tdep.c (i386_skip_noop): New function.
1138 (i386_analyze_prologue): Call i386_skip_noop function.
1140 2008-01-24 Michael Snyder <msnyder@specifix.com>
1142 * procfs.c (procfs_xfer_partial): Comment, cut/paste error.
1143 * win32-nat.c (win32_xfer_partial): Ditto.
1144 * target.c (default_xfer_partial): Minor whitespace adjustment.
1146 2008-01-24 Pedro Alves <pedro@codesourcery.com>
1148 * arm-tdep.c (arm_addr_bits_remove): In non 26-bit mode, don't
1149 strip bit 1 even if pc doesn't point to thumb code.
1151 2008-01-23 Daniel Jacobowitz <dan@codesourcery.com>
1153 * remote.c (remote_wait): Handle SIGINT between packets.
1154 (remote_async_wait): Likewise.
1156 2008-01-23 Vladimir Prus <vladimir@codesourcery.com>
1157 Chris Demetriou <cgd@google.com>
1159 * thread.c (add_thread_silent): Renamed
1161 (print_thread_events): New variable definition.
1162 (show_print_thread_events): New function.
1163 (_initialize_thread): Add "set print thread-events" and
1164 "show print thread-events" commands.
1165 (add_thread): Announce new thread.
1166 * gdbthread.h (add_thread_silent): Declare.
1167 (print_thread_events): New variable declaration.
1168 * inf-ttrace.c (inf_ttrace_wait): Don't
1169 inform about new thread, as add_thread is always
1170 called too, and will take care of that.
1171 * infrun.c (handle_inferior_event): Likewise.
1172 * procfs.c (procfs_wait): Likewise.
1173 * remote.c (remote_currthread): Likewise.
1174 * sol-thread.c (sol_thread_wait): Likewise.
1175 * win32-nat.c (get_win32_debug_event): Likewise.
1176 * linux-thread-db.c (attach_thread): Likewise.
1177 Remove the verbose parameter.
1178 (check_event): Make detach_thread be verbose
1179 only if print_thread_events is set.
1180 * linux-nat.c (lin_lwp_attach_lwp): Don't inform
1181 about new thread. This is called only from
1182 linux-thread-db.c:attach_thread, which will take care.
1183 Remove the verbose parameter.
1184 * linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
1186 2008-01-23 Nick Roberts <nickrob@snap.net.nz>
1188 * mi/mi-cmd-var.c (mi_cmd_var_set_format): Add value field to output.
1190 2008-01-22 Vladimir Prus <vladimir@codesourcery.com>
1192 * breakpoint.c (break_command_really): New parameter
1194 (break_command_1): Pass 0 as
1195 ignore_count to break_command_really.
1196 (gdb_breakpoint): Pass ignore_count to
1197 break_command_really.
1199 2008-01-21 Kevin Buettner <kevinb@redhat.com>
1201 * mn10300-linux-tdep.c (am33_linux_sigframe_cache_init): Find
1202 sigcontext struct via pointer.
1203 (struct sigframe comment): Update to show new field `psc'.
1205 2008-01-21 Vladimir Prus <vladimir@codesourcery.com>
1207 * infrun.c (handle_inferior_event): If
1208 we failed to remove breakpoints, error,
1209 don't try to increment PC by hand.
1211 2008-01-18 Nick Hudson <nick.hudson@dsl.pipex.com>
1213 Add NetBSD/hppa target and host support.
1215 * hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
1216 (hppabsd_gregset): Move to ...
1217 (hppabsd_regset_from_core_section): Rename
1218 hppaobsd_regset_from_core_section and move to ...
1219 (hppabsd_find_global_pointer): Update comment.
1220 (hppabsd_init_abi): Make global. Do not register
1221 hppabsd_regset_from_core_section.
1222 (hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
1224 (_initialize_hppabsd_tdep): Move to ...
1225 * hppaobsd-tdep.c: ... here. New file.
1226 * hppnbsd-tdep.c: New file.
1227 * hppnbsd-nat.c: New file.
1228 * Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
1229 (ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
1230 (hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
1231 (hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
1232 * configure.host (hppa*-*-netbsd*): New entry.
1233 * configure.tgt (hppa*-*-netbsd*): New entry.
1234 (hppa*-*-openbsd*): Update.
1235 * NEWS (New native configuration): Mention NetBSD/hppa.
1236 (New targets): Mention NetBSD/hppa.
1238 2008-01-18 Markus Deuling <deuling@de.ibm.com>
1240 * gdbarch.sh (function_list): Add new property bits_big_endian to
1242 * gdbarch.{c,h}: Regenerate.
1244 * value.c (struct value): Replace BITS_BIG_ENDIAN by
1245 gdbarch_bits_big_endian (comment).
1246 (unpack_field_as_long, modify_field): Likewise.
1247 * value.h: Likewise (comment).
1248 * valops.c (value_slice): Likewise.
1249 * valarith.c (value_subscript, value_bit_index): Likewise.
1250 * gdbtypes.h (field): Likewise (comment).
1251 * eval.c (evaluate_subexp_standard): Likewise.
1252 * dwarf2read.c (dwarf2_add_field): Likewise.
1253 * ada-lang.c (decode_packed_array, ada_value_primitive_packed_val)
1254 (move_bits, ada_value_assign, value_assign_to_component): Likewise.
1256 * defs.h (BITS_BIG_ENDIAN): Remove.
1258 2008-01-18 Markus Deuling <deuling@de.ibm.com>
1260 * jv-exp.y (yylex): Replace DEPRECATED_STREQN with the appropriate
1262 * m2-exp.y (yylex): Likewise.
1263 * objc-exp.y (yylex): Likewise.
1265 * defs.h (DEPRECATED_STREQN): Remove.
1267 2008-01-17 H.J. Lu <hjl.tools@gmail.com>
1269 * MAINTAINERS: Update my email address.
1271 2008-01-17 Jim Blandy <jimb@codesourcery.com>
1273 * README: Mention gdbserver/README.
1275 2008-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
1277 * valarith.c (value_binop): Handle BINOP_INTDIV
1278 for unsigned and signed integers.
1280 2008-01-17 Ulrich Weigand <uweigand@de.ibm.com>
1282 * s390-tdep.c (s390_gdbarch_init): Set default long double
1283 type to 128-bit IEEE quad.
1285 2008-01-17 Joel Brobecker <brobecker@adacore.com>
1287 * hpux-thread.c (hpux_thread_resume): Delete commented-out code.
1289 2008-01-16 Mark Kettenis <kettenis@gnu.org>
1291 * auxv.c (fprint_target_auxv): Add support for AT_SUN_AUXFLAGS.
1293 * dfp.c, dfp.h: Rename decimal_to_double to decimal_to_doublest.
1294 * value.c: All callers changed.
1296 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1298 * rs6000-nat.c (add_vmap, vmap_ldinfo, vmap_exec): Replace
1299 DEPRECATED_STREQ by its expression.
1300 * coffread.c (coff_locate_sections, coff_symtab_read): Likewise.
1301 * xcoffread.c (read_xcoff_symtab, read_symbol_lineno, find_linenos)
1302 (scan_xcoff_symtab): Likewise.
1303 * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Likewise.
1304 * f-lang.c (find_common_for_function): Likewise.
1305 * objc-exp.y (parse_number): Likewise.
1307 * defs.h (DEPRECATED_STREQ): Remove.
1309 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1311 * mn10300-tdep.h (AM33_MODE): Add gdbarch as parameter.
1312 * mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use
1313 get_frame_arch to get at the current_architecture. Update AM33_MODE
1315 (mn10300_analyze_prologue): Add gdbarch as parameter. Update caller.
1316 (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
1318 (set_reg_offsets, mn10300_analyze_prologue): Fix indentation.
1320 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1322 * amd64-nat.h (amd64_native_gregset_supplies_p): Add gdbarch as
1324 * amd64-nat.c (amd64_native_gregset_supplies_p): Likewise.
1326 (amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace
1327 current_gdbarch by gdbarch. Update caller.
1329 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers)
1330 (amd64_linux_store_inferior_registers): Use get_regcache_arch to get at
1331 the current architecture. Update calls of
1332 amd64_native_gregset_supplies_p.
1333 * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers)
1334 (amd64bsd_store_inferior_registers): Likewise.
1336 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1338 * ppc-linux-nat.c (ppc_register_u_addr): Add gdbarch as parameter.
1339 Replace current_gdbarch by gdbarch. Update caller.
1341 2008-01-16 Markus Deuling <deuling@de.ibm.com>
1343 * dbxread.c (repeated_header_complaint, dbx_symfile_init)
1344 (read_dbx_dynamic_symtab, function_outside_compilation_unit_complaint)
1345 (read_dbx_symtab, end_psymtab, dbx_psymtab_to_symtab_1)
1346 (dbx_psymtab_to_symtab, read_ofile_symtab, process_one_symbol)
1347 (stabsect_build_psymtabs): Fix indentation.
1349 2008-01-15 Michael Snyder <msnyder@specifix.com>
1351 * corelow.c (core_xfer_partial): Comment, cut/paste error.
1353 2008-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
1355 * win32-nat.c (win32_create_inferior): Restore code calling
1356 CloseHandle on ProcessInformation structure.
1358 2008-01-13 Nick Hudson <nick.hudson@dsl.pipex.com>
1360 * configure.ac: Check for void * as 3 argument of ptrace.
1361 * configure: regenerate.
1363 2008-01-11 Markus Deuling <deuling@de.ibm.com>
1365 * alpha-tdep.c (alpha_heuristic_proc_start)
1366 (alpha_sigtramp_register_address): Add gdbarch as parameter. Replace
1367 current_gdbarch by gdbarch.
1369 (alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the
1370 current architecture by frame_info. Update alpha_heuristic_proc_start
1373 (alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use
1374 get_frame_arch to get at the current architecture by frame_info. Update
1375 alpha_sigtramp_register_address call.
1377 * arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace
1378 current_gdbarch by gdbarch. Update caller.
1379 (convert_to_extended, convert_from_extended): Add endianess parameter
1380 for comparison. Update caller.
1381 (arm_extract_return_value, arm_store_return_value): Use
1382 get_regcache_arch to get at the current architecture.
1384 * cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace
1385 current_gdbarch by gdbarch. Update caller.
1386 (cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add
1387 gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch.
1389 * h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add
1390 gdbarch as parameter. Update caller.
1391 (h8300_init_frame_cache): Add gdbarch as parameter. Replace
1392 current_gdbarch by gdbarch. Update caller.
1394 * hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and
1395 update caller. Replace current_gdbarch by gdbarch.
1397 * m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at
1398 the current architecture. Replace current_gdbarch by gdbarch.
1399 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
1400 (STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its
1401 expression. Add gdbarch as parameter and replace current_gdbarch with
1403 (M6811_TDEP): Remove.
1404 (m68hc11_frame_prev_register): Use get_frame_arch to get at the current
1406 (m68hc11_scan_prologue): Add gdbarch as parameter. Replace
1407 current_gdbarch by gdbarch. Update caller.
1409 * m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and
1411 (m68k_analyze_register_saves): Likewise. Also replace current_gdbarch
1414 * rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update
1415 caller. Relace current_gdbarch by gdbarch.
1416 (altivec_register_p, spe_register_p): Likewise.
1417 * ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as
1419 * ppc-linux-nat.c (fetch_register, store_register): Update caller of
1420 altivec_register_p and spe_register_p.
1422 * score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update
1423 caller. Replace current_gdbarch by gdbarch.
1424 (score_analyze_prologue): use get_frame_arch to get at the current
1427 * sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter.
1428 * sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace
1429 current_gdbarch by gdbarch. Update caller.
1430 (sparc_frame_cache): Use get_frame_arch to get at the current
1432 * sparce64-tdep.c (sparc64_skip_prologue): Update call of
1433 sparc_analyze_prologue.
1435 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as
1438 2008-01-11 Markus Deuling <deuling@de.ibm.com>
1440 * exec.c: #include "arch-utils.h"
1441 (print_section_info): Use gdbarch_from_bfd to get at the
1442 current architecture. Replace current_gdbarch. Fix indention. Replace
1443 deprecated_print_address_numeric by paddress.
1444 * Makefile.in (exec.o) Add dependency to arch-utils.h.
1446 * valprint.c (val_print_string): Replace
1447 deprecated_print_address_numeric.
1448 * tracepoint.c (trace_mention, scope_info): Likewise.
1449 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol)
1450 (print_symbol, print_partial_symbols, maintenance_info_psymtabs)
1451 (maintenance_check_symtabs): Likewise.
1452 * symfile.c (list_overlays_command): Likewise.
1453 * stack.c (frame_info, print_block_frame_labels): Likewise.
1454 * printcmd.c (print_address, print_address_demangle)
1455 (address_info): Likewise.
1456 * corefile.c (memory_error): Likewise.
1457 * infcmd.c (jump_command): Likewise.
1458 * breakpoint.c (insert_bp_location, describe_other_breakpoints)
1459 (mention, delete_breakpoint): Likewise.
1460 * c-valprint.c (print_function_pointer_address, c_val_print): Likewise.
1461 * dwarf2read.c (dump_die): Likewise.
1462 * ada-valprint.c (ada_val_print_1): Likewise.
1463 * f-valprint.c (f_val_print): Likewise.
1464 * linux-fork.c (info_forks_command): Likewise.
1465 * m32r-com.c (m32r_load_section, m32r_load)
1466 (m32r_upload_command): Likewise.
1468 * ui-out.c (ui_out_field_core_addr): Remove unnecessary comment.
1470 2008-01-11 Markus Deuling <deuling@de.ibm.com>
1472 * gdbarch.sh (skip_prologue): Add gdbarch
1474 * gdbarch.{c,h}: Regenerate.
1476 * alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter.
1477 * amd64-tdep.c (amd64_skip_prologue): Likewise.
1478 * avr-tdep.c (avr_skip_prologue): Likewise.
1479 * cris-tdep.c (cris_skip_prologue): Likewise.
1480 * frv-tdep.c (frv_skip_prologue): Likewise.
1481 * h8300-tdep.c (h8300_skip_prologue): Likewise.
1482 * hppa-tdep.c (hppa_skip_prologue): Likewise.
1483 * i386-tdep.c (i386_skip_prologue): Likewise.
1484 * ia64-tdep.c (ia64_skip_prologue): Likewise.
1485 * iq2000-tdep.c (iq2000_skip_prologue): Likewise.
1486 * m32r-tdep.c (m32r_skip_prologue): Likewise.
1487 * m68hc11-tdep.c (m68hc11_skip_prologue): Likewise.
1488 * m68k-tdep.c (m68k_skip_prologue): Likewise.
1489 * m88k-tdep.c (m88k_skip_prologue): Likewise.
1490 * mep-tdep.c (mep_skip_prologue): Likewise.
1491 * mips-tdep.c (mips_skip_prologue): Likewise.
1492 * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
1493 * mt-tdep.c (mt_skip_prologue): Likewise.
1494 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
1495 * score-tdep.c (score_skip_prologue): Likewise.
1496 * sh64-tdep.c (sh64_skip_prologue): Likewise.
1497 * sh-tdep.c (sh_skip_prologue): Likewise.
1498 * sparc64-tdep.c (sparc64_skip_prologue): Likewise.
1499 * sparc-tdep.c (sparc32_skip_prologue): Likewise.
1500 * spu-tdep.c (spu_skip_prologue): Likewise.
1501 * v850-tdep.c (v850_skip_prologue): Likewise.
1502 * vax-tdep.c (vax_skip_prologue): Likewise.
1503 * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
1504 * xtensa-tdep.c (xtensa_skip_prologue): Likewise.
1506 * arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace
1507 current_gdbarch by gdbarch.
1508 * m32c-tdep.c (m32c_skip_prologue): Likewise.
1509 * s390-tdep.c (s390_skip_prologue): Likewise.
1511 2008-01-10 Doug Evans <dje@google.com>
1513 * defs.h (struct continuation_arg): Fix typo in comment.
1514 * target.c (target_translate_tls_address): Fix comment spelling error.
1516 2008-01-09 Thiago Jung Bauermann <bauerman@br.ibm.com>
1518 * doublest.h (DOUBLEST_PRINT_FORMAT): Remove % from string.
1519 (DOUBLEST_SCAN_FORMAT): Likewise.
1520 * dfp.c (decimal_from_floating): Use DOUBLEST_PRINT_FORMAT.
1521 * ada-lex.l (processReal): Prepend "%" to use of DOUBLEST_SCAN_FORMAT.
1522 * c-exp.y (parse_number): Likewise.
1523 * jv-exp.y (parse_number): Likewise.
1524 * objc-exp.y (parse_number): Likewise.
1525 * p-exp.y (parse_number): Likewise.
1527 2008-01-09 Joel Brobecker <brobecker@adacore.com>
1529 * gdbtypes.c (create_array_type): Add handling of null Ada arrays.
1530 (check_typedef): Likewise.
1532 2008-01-09 Luis Machado <luisgpm@br.ibm.com>
1534 * printcmd.c (printf_command): Add seen_big_h, seen_big_d and
1535 seen_double_big_d, treat the new H, D, and DD modifiers as length
1538 2008-01-08 Joel Brobecker <brobecker@adacore.com>
1540 * dwarf2read.c (read_enumeration_type): Add comment.
1542 2008-01-08 Thiago Jung Bauermann <bauerman@br.ibm.com>
1544 * config.in: Regenerate.
1546 2008-01-08 Joel Brobecker <brobecker@adacore.com>
1548 * ada-lang.c (ada_convert_actual): Renames convert_actual.
1550 (ada_convert_actuals): Delete.
1551 * ada-lang.h (ada_convert_actual): Add declaration.
1552 (ada_convert_actuals): Remove declaration.
1553 * infcall.c: #include "ada-lang.h".
1554 (value_arg_coerce): Add new parameter sp. Update function
1555 documetnation. Add handling of Ada function call parameters.
1556 * Makefile.in (infcall.o): Update dependencies.
1558 2008-01-08 Paul Hilfinger <hilfinger@adacore.com>
1560 * ada-lang.c (ensure_lval): Fix value lval kind.
1561 (convert_actual): Add handling for arguments passed by reference.
1563 2008-01-08 Doug Evans <dje@google.com>
1565 * dbxread.c (read_dbx_symtab): Fix indentation.
1567 2008-01-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
1569 * Makefile.in (dfp.o): Depend on expression.h, gdbtypes.h and value.h.
1570 (valarith.o): Depend on dfp.h.
1571 (valops.o): Likewise.
1572 * dfp.c: Include expression.h, gdbtypes.h, value.h and dfp.h.
1573 (set_decnumber_context): New function.
1574 (decimal_check_errors): Likewise.
1575 (decimal_from_number): Likewise.
1576 (decimal_to_number): Likewise.
1577 (decimal_from_string): Use set_decnumber_context and
1578 decimal_check_errors.
1579 (decimal_from_integral): New function.
1580 (decimal_from_floating): Likewise.
1581 (decimal_to_double): Likewise.
1582 (promote_decimal): Likewise.
1583 (decimal_binop): Likewise.
1584 (decimal_is_zero): Likewise.
1585 (decimal_compare): Likewise.
1586 (decimal_convert): Likewise.
1587 * dfp.h (decimal_from_integral): New prototype.
1588 (decimal_from_floating): Likewise.
1589 (decimal_to_double): Likewise.
1590 (decimal_binop): Likewise.
1591 (decimal_is_zero): Likewise.
1592 (decimal_compare): Likewise.
1593 (decimal_convert): Likewise.
1594 * eval.c (evaluate_subexp_standard): Remove expect_type argument from
1595 call to value_from_decfloat.
1596 * valarith.c: Include dfp.h.
1597 (value_args_as_decimal): New function.
1598 (value_binop): Add if block to handle TYPE_CODE_DECFLOAT values.
1599 (value_logical_not): Likewise.
1600 (value_equal): Likewise.
1601 (value_less): Likewise.
1602 (value_pos): Likewise.
1603 (value_neg): Formatting fix.
1604 * valops.c: Include dfp.h.
1605 (value_cast): Add if block to handle TYPE_CODE_DECFLOAT values.
1606 * value.c (unpack_long): Add case to handle TYPE_CODE_DECFLOAT.
1607 (unpack_double): Add if block to handle TYPE_CODE_DECFLOAT.
1608 (value_from_decfloat): Remove expect_type argument.
1609 * value.h (value_from_decfloat): Update prototype.
1611 2008-01-07 Vladimir Prus <vladimir@codesourcery.com>
1613 Ignore change in name of dynamic linker during
1614 execution on Solaris. This also unbreaks pending breakpoints.
1616 * solist.h (struct target_so_ops): New field same.
1617 * solib-svr4.c (svr4_same): New.
1618 (_initialize_svr4_solib): Register svr4_same.
1619 * solib.c (update_solib_list): Use ops->same, if available.
1621 2008-01-06 Christopher Faylor <me+cygwin@cgf.cx>
1623 * win32-nat.c (win32_make_so): Use cygwin-style path to avoid warnings
1624 when using MS-DOS paths.
1626 2008-01-05 Pedro Alves <pedro@codesourcery.com>
1628 * NEWS: Mention --pid and --core command line behaviour changes.
1630 2008-01-05 Pedro Alves <pedro@codesourcery.com>
1632 * main.c (captured_main): Remove 'count' varible and the
1633 ALIGN_STACK_ON_ENTRY block that used it. Error out if --core and
1634 --pid options were issued simultaneously. If an explicit pid
1635 option was passed, don't fallback to core file. Detect extra
1636 arguments better in the presence of explicit pid or core
1639 2008-01-05 Joel Brobecker <brobecker@adacore.com>
1641 * ada-lang.c (ada_which_variant_applies): Correctly compute
1642 the value of the discriminant when the variant record is packed.
1644 2008-01-04 Joel Brobecker <brobecker@adacore.com>
1646 * ada-lang.c (is_name_suffix): Handle middle-name numeric suffixes
1647 that are used to differentiate homonyms.
1649 2008-01-04 Jerome Guitton <guitton@adacore.com>
1651 * ada-lang.c (decode_packed_array_type): Avoid a seg fault
1652 when the type is an anonymous pointer type.
1653 (ada_check_typedef): Avoid a seg fault when the type is null.
1654 * ada-typeprint.c (print_array_type): Add support for pointer
1657 2008-01-04 Paul N. Hilfinger <hilfinger@adacore.com>
1659 * ada-exp.y: Allow '{type} ADDRESS' notation on left of assignment.
1661 2008-01-04 Joel Brobecker <brobecker@adacore.com>
1663 * ada-lang.c (ada_evaluate_subexp): Evaluate tagged types in
1664 EVAL_NORMAL mode when noside is EVAL_AVOID_SIDE_EFFECTS.
1666 2008-01-04 Joel Brobecker <brobecker@adacore.com>
1668 * ada-exp.y (chop_separator): New function.
1669 (write_selectors): Rewrite to re-use chop_separator.
1670 (ada_nget_field_index, get_symbol_field_type): New functions.
1671 (write_var_or_type): Add support for "ptype TYPENAME.FIELD"
1674 2008-01-03 Thiago Jung Bauermann <bauerman@br.ibm.com>
1676 * symtab.c (find_pc_sect_line): Use SYMBOL_VALUE_ADDRESS instead
1677 of SYMBOL_VALUE when working with function symbols.
1679 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1681 * ada-lang.c (resolve_subexp): Add handling of OP_REGISTER
1682 expressions. These expressions do not need to be rewriten.
1684 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1686 * dwarf2read.c (read_enumeration_type): Flag type as stub if
1687 the given die is a declaration.
1689 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1691 * ada-lang.c (ada_array_bound_from_type): Make non-static.
1692 Handle properly the case when the index type is an enumerated type.
1693 Do not return the subtype of the bounds type, just return the
1694 bounds type directly - this is not needed and is more consistent
1695 with what we do for arrays when no XA parallel type exists.
1697 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1699 * ada-lang.c (static_unwrap_type): Add forward declaration.
1700 (template_to_static_fixed_type): Fields of dynamic types sometimes
1701 also need to be unwrapped. Take this into account.
1702 (ada_to_fixed_type_1): Renamed from ada_to_fixed_type.
1703 (ada_to_fixed_type): New wrapper around ada_to_fixed_type_1.
1704 * ada-typeprint.c (ada_print_type): Get the typename from
1705 the original type, not the base type.
1707 2008-01-03 Jerome Guitton <guitton@adacore.com>
1709 * ada-lang.c (ada_value_struct_elt, to_fixed_array_type)
1710 (to_fixed_array_type, ada_to_fixed_value_create, unwrap_value):
1711 Update calls to ada_to_fixed_type.
1712 (ada_template_to_fixed_record_type_1): Ditto, but without looking
1714 (ada_to_fixed_type): Add check_tag parameter; do not look for
1715 tag if null. When looking for a tag, use a fixed record type.
1716 * ada-lang.h (ada_to_fixed_type): Add check_tag parameter.
1717 * ada-valprint.c (printable_val_type, ada_value_print): Update
1718 calls to ada_to_fixed_type.
1720 2008-01-03 Luis Machado <luisgpm@br.ibm.com>
1722 * doublest.c (convert_floatformat_to_doublest): Call
1723 floatformat_to_doublest instead of floatformat_to_double and use
1725 (convert_doublest_to_floatformat): Call floatformat_from_doublest
1726 instead of floatformat_from_double and use DOUBLEST variables.
1728 2008-01-03 Nick Hudson <nick.hudson@dsl.pipex.com>
1730 * MAINTAINERS (Write After Approval): Add self.
1732 2008-01-03 Joel Brobecker <brobecker@adacore.com>
1734 * symfile.c (set_initial_language): Make non-static.
1735 * symfile.h (set_initial_language): Add declaration.
1736 * language.c: #include "symfile.h".
1737 (set_language): Call set_initial_language if the frame language
1738 could not be determined.
1740 2008-01-03 Paul N. Hilfinger <hilfinger@adacore.com>
1742 * eval.c (evaluate_subexp_for_address): Provide frame address to
1743 locate_var_value only if it will be needed.
1745 2008-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1747 * linux-nat.c (linux_child_follow_fork): Call also CHECK_FOR_THREAD_DB.
1749 2008-01-02 Joel Brobecker <brobecker@adacore.com>
1751 * ada-lang.c (ada_evaluate_subexp): Modify the value returned
1752 when noside is EVAL_AVOID_SIDE_EFFECTS to be an lval_memory.
1753 This is needed to make sure that any other treatment applied
1754 to the resulting value does not fail for spurious reason,
1755 such as trying to take the address of this value.
1757 2008-01-02 Joel Brobecker <brobecker@adacore.com>
1759 * ada-lang.c (ada_value_equal): Dereference reference types when
1762 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
1764 Updated copyright notices for most files.
1766 2008-01-01 Christopher Faylor <me+gdb@cgf.cx>
1768 * win32-nat.c (psapi_module_handle): Remove static.
1769 (get_module_name): Rename from psapi_get_dll_name. Revamp slightly to
1770 return first module found if base_address is zero. Don't initialize
1771 psapi function pointers here. Convert to cygwin paths when
1773 (win32_pid_to_exec_file): Use Cygwin's /proc interface to determine
1774 executable name. Use get_module_name when that fails or when
1776 (_initialize_psapi): New function. Initialize psapi stuff before it is
1777 needed or issue a warning if it is not found. Move psapi_module_handle
1780 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1782 * ada-lang.c (ada_remove_trailing_digits): New function.
1783 (ada_remove_po_subprogram_suffix): New function.
1784 (ada_decode): Improve. Move the description of the algorithm
1785 directly inside the code, instead of in the function global
1788 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1790 * ada-valprint.c (ada_val_print_1) [TYPE_CODE_REF]: Ignore deref_ref
1791 and always print the dereferenced value.
1793 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1795 * ada-lang.c (ada_evaluate_subexp, case BINOP_SUB): Add handling
1796 of the case where the first argument is a reference.
1797 (ada_evaluate_subexp, case BINOP_ADD): Likewise.
1799 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1801 Implement support for Ada interface types.
1803 * ada-lang.c (ada_is_dispatch_table_ptr_type): New function.
1804 (ada_is_ignored_field): Ignore fields that are a dispatch table
1807 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1809 * top.c (print_gdb_version): Update copyright year.
1811 2008-01-01 Joel Brobecker <brobecker@adacore.com>
1813 * ChangeLog-2007: New ChangeLog rotation.
1814 * ChangeLog: Reset for 2008.
1815 * config/djgpp/fnchange.lst: Add entries for ChangeLog-2006 and
1818 For older changes see ChangeLog-2007.
1824 version-control: never