1 2009-05-12 Jim Blandy <jimb@red-bean.com>
3 * MAINTAINERS: Remove self as m32c target maintainer.
5 2009-05-12 Pedro Alves <pedro@codesourcery.com>
7 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
8 * command.h (deprecated_add_set_cmd): Delete declaration.
9 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
10 'set debug gnu-nat' and 'show debug gnu-nat'.
11 * i386-nat.c (_initialize_i386_nat): Replace 'maint
12 show-debug-registers' with 'maint set show-debug-registers' and
13 'maint show show-debug-registers'.
14 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
15 show-debug-registers' with 'maint set show-debug-registers' and
16 'maint show show-debug-registers'.
18 2009-05-12 Joel Brobecker <brobecker@adacore.com>
20 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
21 pushing it on the output obstack.
23 2009-05-11 Joel Brobecker <brobecker@adacore.com>
25 Fix internal error on breaking at a multi-locations caller source line.
26 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
27 command with no parameters.
29 2009-05-11 Pedro Alves <pedro@codesourcery.com>
31 * linux-nat.c (enum sigchld_state): Delete.
32 (linux_nat_async_events_state): Delete.
33 (struct waitpid_result): Delete.
34 (waitpid_queue): Delete.
35 (queued_waitpid_1): Delete.
36 (async_file_flush): New.
37 (queued_waitpid, push_waitpid): Delete.
38 (async_file_mark): New.
39 (drain_queued_events): Delete.
40 (my_waitpid): Remove locally queued events handling.
41 (linux_test_for_tracefork): Upjust.
42 (linux_child_follow_fork): Ditto.
43 (sync_sigchld_action): Delete.
44 (blocked_mask): Reinstate.
45 (async_sigchld_action): Rename to...
46 (sigchld_action): ... this.
47 (block_child_signals): New.
48 (restore_child_signals_mask): New.
49 (lin_lwp_attach_lwp): Adjust.
50 (linux_nat_create_inferior): Ditto.
51 (linux_nat_attach): Also use lp->status in async mode.
52 (get_pending_status): Don't use queued_waitpid.
53 (linux_nat_detach): Don't drain locally queued events.
54 (linux_nat_resume): Allow pending wait statuses stored lp->status
55 in async mode. If returning early due to a pending event,
56 re-register the event source.
57 (stop_wait_callback): Allow pending wait statuses stored
58 lp->status in async mode.
59 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
60 (linux_nat_wait): Rename to ...
61 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
62 lp->status in async mode. Always add WNOHANG to the waitpid
63 options in async mode.
64 (linux_nat_wait): New.
65 (kill_callback): Don't drain locally queued events.
66 (sigchld_handler): Rewrite.
67 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
68 refer to "set target-async".
69 (linux_nat_async_mask): If in non-stop, and re-enabling async
70 mode, re-register the target event source in the event loop.
71 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
72 (get_pending_events, async_sigchld_handler)
73 (linux_nat_async_events): Delete.
74 (handle_target_event): New.
75 (linux_nat_async_file_handler): Delete.
76 (linux_async_pipe): New.
77 (linux_nat_async): Only re-register in the event loop if not
78 registered yet. Always notify the event-loop once if enabling the
80 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
81 lp->status, not in the locally queued event list.
82 (linux_nat_stop): Don't mask out async event handling.
83 (linux_nat_setup_async): Delete.
84 (_initialize_linux_nat): Adjust.
85 (lin_thread_get_thread_signals): blocked_mask is global again.
88 2009-05-11 Pierre Muller <muller.u-strasbg.fr>
92 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
93 (target_stoppped_by_watchpoint): New macro.
94 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
95 (target_have_steppable_watchpoint): New macro.
96 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
97 (target_have_continuable_watchpoint): New macro.
98 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
99 (target_can_use_hardware_watchpoint): New macro.
100 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
101 (target_region_ok_for_hw_watchpoint): New macro.
103 * breakpoint.c (update_watchpoint): Use new macros.
104 (bpstat_alloc): Likewise.
105 (create_breakpoint): Likewise.
106 (watch_command_1): Likewise.
107 (can_use_hardware_watchpoint): Likewise.
108 (do_enable_breakpoint): Likewise.
109 * infrun.c (handle_inferior_event): Adapt to new macros.
110 * mips-tdep.c (mips_gdbarch_init): Update comments.
111 * procfs.c (procfs_set_watchpoint): Update comment.
112 (procfs_insert_watchpoint): Adapt to new macros.
113 * remote-m32r-sdi.c (m32r_stop):
114 * remote-mips.c (mips_remove_breakpoint):
115 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
116 (debug_to_stopped_by_watchpoint): Likewise.
119 2009-05-10 Pierre Muller <muller.u-strasbg.fr>
121 * src/gdb/target.h: Remove all tests for already defined
122 macros. All macros defined here should not be set in config
125 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
127 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
128 (have_ptrace_getsetfpregs): Likewise.
129 fetch_all_gp_regs): New function.
130 (fetch_gp_regs): New function.
131 (fetch_all_fp_regs): Likewise.
132 (fetch_fp_regs): New function.
133 (fetch_ppc_registers): Using the new methods to fetch general-
134 purpose and floating-pointer registers.
135 (store_all_gp_regs): New function.
136 (store_gp_regs): Likewise.
137 (store_all_fp_regs): New function.
138 (store_fp_regs): Likewise.
139 (store_ppc_registers): Using the new methods to store general-
140 purpose and floating-pointer registers.
142 2009-05-08 Doug Evans <dje@google.com>
144 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
146 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
148 * MAINTAINERS (Write After Approval): Add self.
150 2009-05-07 Joel Brobecker <brobecker@adacore.com>
152 * gdbarch.h (target_gdbarch): Add comment documenting this global.
154 2009-05-06 Joel Brobecker <brobecker@adacore.com>
156 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
158 * configure: Regenerate.
160 2009-05-06 Joel Brobecker <brobecker@adacore.com>
162 * utils.c: Add include of gdb_usleep.h.
163 (defaulted_query): Detect false EOF conditions that happen
164 on terminals opened with the O_NONBLOCK flag when there is
167 2009-05-06 Pedro Alves <pedro@codesourcery.com>
169 * inferior.c (add_inferior): Move observer_notify_new_inferior
171 (add_inferior_silent): ... here.
173 2009-05-06 Pierre Muller <muller.u-strasbg.fr>
174 Pedro Alves <pedro@codesourcery.com>
176 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
177 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
179 (procfs_stopped_by_watchpoint): Made static, ptid argument
181 (_initialize_procfs): Register new watchpoint related target
183 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
184 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
185 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
186 (target_insert_watchpoint, target_remove_watchpoint): Delete.
187 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
189 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
190 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
191 (target_insert_watchpoint, target_remove_watchpoint): Delete.
192 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
194 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
195 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
196 (target_insert_watchpoint, target_remove_watchpoint): Delete.
197 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
200 2009-05-06 Hui Zhu <teawater@gmail.com>
202 * i386-tdep.c (i386_process_record): Change bzero to memset.
204 2009-05-06 Hui Zhu <teawater@gmail.com>
206 * NEWS: Add item for process record and replay.
208 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
210 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
212 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
214 * inferior.h (read_pc, write_pc): Remove.
215 * regcache.c (read_pc, write_pc): Remove.
217 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
219 (handle_inferior_event): Use regcache_read_pc instead of read_pc
220 when determining value of stop_pc. Replace subsequent uses of
221 read_pc by inspecting already-retrieved stop_pc value.
222 (keep_going): Use regcache_read_pc instead of read_pc.
224 * breakpoint.c (watchpoint_check): Use current frame architecture
225 and PC instead of current_gdbarch and read_pc ().
226 * tracepoint.c (set_traceframe_context): Replace PC argument
228 (trace_start_command, finish_tfind_command): Update calls.
229 (finish_tfind_command): Compare frame IDs to identify transitions
231 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
232 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
233 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
234 of read_pc and write_pc.
235 (store_register): Make regcache argument non-const. Update call
236 to exec_one_dummy_insn.
238 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
239 * infcmd.c (post_create_inferior): Likewise.
240 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
241 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
242 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
243 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
244 * linux-fork.c (fork_load_infrun_state): Likewise.
245 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
246 * record.c (record_wait): Likewise.
247 * procfs.c (procfs_wait): Likewise.
248 * remote-mips.c (common_open, mips_wait): Likewise.
249 * remote-m32r-sdi.c (m32r_resume): Likewise.
251 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
252 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
253 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
254 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
255 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
257 * solib-darwin.c: Include "regcache.h".
258 * solib-pa64.c: Include "regcache.h".
259 * solib-svr4.c: Include "regcache.h.".
261 * symfile.c: Do not mention read_pc or write_pc in comments.
262 * dink32-rom.c: Likewise.
263 * m32r-rom.c: Likewise.
264 * mips-tdep.c: Likewise.
266 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
268 * fork-child.c (startup_inferior): Move setting stop_pc ...
269 * infcmd.c (post_create_inferior): ... to here.
271 2009-05-04 Michael Snyder <msnyder@vmware.com>
273 * NEWS: Add item for reverse debugging commands.
275 2009-05-04 Pedro Alves <pedro@codesourcery.com>
277 * go32-nat.c (go32_stop): Delete.
278 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
279 (go32_create_inferior): Don't call go32_stop or
281 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
283 (init_go32_ops): Don't register go32_stop.
285 2009-05-02 Eli Zaretskii <eliz@gnu.org>
287 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
290 * infcall.c (find_function_addr): Avoid compiler warnings for
293 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
295 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
296 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
298 2009-05-01 Doug Evans <dje@google.com>
300 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
303 2009-05-01 Eli Zaretskii <eliz@gnu.org>
305 * record.c (_initialize_record): Reformat and clarify doc strings
306 for stop-at-limit and insn-number-max.
308 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
310 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
312 Make specifiable the make_function_type type memory ownership.
313 * gdbtypes.c (make_function_type): New parameter `objfile', use it
314 explicitely instead of TYPE-initialized removed local variable
315 `objfile'. Describe `objfile' it in the function comment.
316 (lookup_function_type): Update make_function_type callers.
317 * gdbtypes.h (make_function_type): Update the prototype.
318 * jv-lang.c (java_link_class_type): Update make_function_type callers.
319 * dwarf2read.c (read_subroutine_type): Likewise.
320 * stabsread.c (read_type): Likewise.
322 2009-05-01 Eli Zaretskii <eliz@gnu.org>
324 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
325 printing a bogus "Thread <main>".
326 (go32_thread_alive): Don't return 1 for null_ptid.
328 * i386-tdep.c (i386_go32_init_abi): Override the number of
329 registers due to non-support of SSE.
331 2009-04-30 Anthony Green <green@moxielogic.com>
333 * configure.tgt: Link the moxie simulator in with gdb.
335 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
337 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
340 2009-04-30 Hui Zhu <teawater@gmail.com>
341 Michael Snyder <msnyder@vmware.com>
343 I386 Linux process record and replay support.
345 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
346 This struct has the argument for the function
347 "record_linux_system_call".
348 (i386_linux_intx80_sysenter_record): New function. Parse the
349 system call instruction and call function
350 "record_linux_system_call" to record execute log.
351 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
352 Set "i386_linux_intx80_sysenter_record" to
353 "i386_intx80_record" and "i386_sysenter_record".
355 2009-04-30 Hui Zhu <teawater@gmail.com>
356 Michael Snyder <msnyder@vmware.com>
358 I386 architecture process record and replay support.
360 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
361 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
363 (aflag, dflag, override, modrm, mod, reg, rm, ot,
364 i386_record_pc): New variables. Ditto.
365 (i386_record_modrm, i386_record_lea_modrm_addr,
366 i386_record_lea_modrm): New functions. Ditto.
367 (i386_process_record): New function. Parse the instruction in
368 address "addr" and record the values of registers and memory
369 that will be changed by this instruction.
370 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
371 "process_record" interface.
372 * i386-tdep.h (gdbarch_tdep): New function pointers
373 "i386_intx80_record" and "i386_sysenter_record" that point to
374 the function that can record "intx80" and "sysenter" execute
377 2009-04-30 Hui Zhu <teawater@gmail.com>
378 Michael Snyder <msnyder@vmware.com>
380 * infrun.c (use_displaced_stepping): Return false if process
381 record and replay target is used.
382 (proceed): Call function "record_not_record_set" if pocess
383 record and replay target is used.
385 2009-04-30 Hui Zhu <teawater@gmail.com>
386 Michael Snyder <msnyder@vmware.com>
388 Linux process record and replay support.
390 * Makefile.in (ALLDEPFILES): Add linux-record.c.
391 (ALL_TARGET_OBS): Add linux-record.o.
392 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
393 (i[34567]86-*-linux*): Add linux-record.o.
394 * linux-record.c, linux-record.h: New file.
396 2009-04-30 Hui Zhu <teawater@gmail.com>
397 Michael Snyder <msnyder@vmware.com>
399 Process record and replay target.
401 * Makefile.in (SFILES): Add record.c.
402 (COMMON_OBS): Add record.o.
403 * record.c, record.h: New file.
405 2009-04-30 Hui Zhu <teawater@gmail.com>
406 Michael Snyder <msnyder@vmware.com>
408 * target.h (strata): New stratum "record_stratum".
410 2009-04-30 Hui Zhu <teawater@gmail.com>
411 Michael Snyder <msnyder@vmware.com>
413 GDBARCH interface for process record and replay.
415 * gdbarch.sh (process_record): This interface point to the
416 function that records the inferior execute log.
418 2009-04-29 Doug Evans <dje@google.com>
420 * i386-nat.c (child_post_startup_inferior): Delete, unused.
422 2009-04-29 Pedro Alves <pedro@codesourcery.com>
424 * breakpoint.c (print_exception_catchpoint): Access `b' directly
425 instead of `b->loc->owner'.
426 (print_mention_exception_catchpoint): Ditto.
428 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
430 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
432 2009-04-27 Tom Tromey <tromey@redhat.com>
434 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
436 2009-04-27 Jerome Guitton <guitton@adacore.com>
438 * symtab.c (append_exact_match_to_sals): New function, extracted
439 from expand_line_sal.
440 (expand_line_sal): Use append_exact_match_to_sals to append exact
441 matches. If none found, append all best items.
443 2009-04-27 Jerome Guitton <guitton@adacore.com>
445 * main.c (captured_main): Move gdbinit lookups after gdb_init.
447 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
450 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
451 (read_func_scope): Call inherit_abstract_dies.
453 2009-04-25 Eli Zaretskii <eliz@gnu.org>
455 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
456 sparc-sol2-nat.c and sparc-sol2-tdep.c.
458 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
460 2009-04-24 Pierre Muller <muller.u-strasbg.fr>
462 ARI change: Use "/* ARI: rule */" pattern.
463 * utils.c: Update ARI patterns.
464 * gdb_dirent.h: Likewise.
466 2009-04-23 Anthony Green <green@moxielogic.com>
468 * MAINTAINERS: Add moxie target.
469 * configure.tgt: Add moxie-*-elf target.
470 * moxie-tdep.c: New file.
471 * moxie-tdep.h: New file.
473 2009-04-23 Joel Brobecker <brobecker@adacore.com>
475 * ada-lang.c: Remove an extra empty line. No code change.
477 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
479 Fix double free on error inserting the breakpoint instruction.
480 * breakpoint.c (create_breakpoints): Move the
481 update_global_location_list call to ...
482 (break_command_really): ... here together with the second local call
483 both unified after all the cleanups.
485 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
486 Tom Tromey <tromey@redhat.com>
488 * configure, config.in: Regenerate.
489 * configure.ac: Support for relocatable GDB datadir. Use
490 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
491 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
492 * top.c (init_main): Add "set data-directory".
493 * defs.h (gdb_datadir): Declare.
494 * main.c (gdb_datadir): New global.
495 (captured_main): Initialize gdb_datadir. Use relocate_directory.
496 (relocate_path): New function.
497 (relocate_directory): Likewise.
498 (get_init_files): Use relocate_path.
499 (README): Mention --with-gdb-datadir.
501 2009-04-23 Joel Brobecker <brobecker@adacore.com>
503 * ada-tasks (task_command_1): Call target_find_new_threads.
505 2009-04-23 Joel Brobecker <brobecker@adacore.com>
507 * stack.c (do_gdb_disassembly): Print the exception message if an
508 error was thrown while trying to perform the disassembly.
510 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
512 * varobj.c (free_variable): Replace free_current_contents by xfree.
514 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
516 * arm-linux-nat.c (fetch_register, store_register): Use
517 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
518 * arm-linux-tdep.c (arm_linux_supply_gregset,
519 arm_linux_collect_gregset): Likewise.
520 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
521 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
523 2009-04-22 Hui Zhu <teawater@gmail.com>
525 * stack.c (_initialize_stack): Set the default of
526 disassemble-next-line to off.
528 2009-04-21 Tom Tromey <tromey@redhat.com>
530 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
531 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
533 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
535 * configure.ac: Add quotes to not lose brackets in help text.
536 * configure: Rebuild.
538 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
540 * configure.ac: Don't postprocess Makefile in config.status.
541 Substitute GDB_NM_FILE. Don't substitute nm_h.
542 * Makefile.in (GDB_NM_FILE): Substitute.
543 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
544 * configure: Regenerate.
545 * gnulib/Makefile.in: Regenerate.
547 2009-04-21 Joseph Myers <joseph@codesourcery.com>
549 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
550 --with-htmldir): New.
551 * configure: Regenerate.
553 2009-04-21 Tom Tromey <tromey@redhat.com>
555 * configure: Rebuild.
556 * configure.ac: Use lower case for start of help strings. Clean
557 up --with-sysroot help.
559 2009-04-21 Tom Tromey <tromey@redhat.com>
561 * configure: Rebuild.
562 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
563 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
566 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
568 ARI fix: remove "%p".
569 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
570 (ia64_sigtramp_frame_this_id): Ditto.
571 (ia64_libunwind_frame_this_id): Ditto.
572 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
573 * symmisc.c (maintenance_info_psymtabs): Ditto.
575 2009-04-21 Joseph Myers <joseph@codesourcery.com>
577 * configure.ac (--with-relocated-sources): New.
578 * configure, config.in: Regenerate.
579 * source.c (add_substitute_path_rule): Remove static.
580 * source.h (add_substitute_path_rule): Declare.
581 * main.c: Include "source.h".
582 (captured_main): Add substitution rule if RELOC_SRCDIR.
584 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
586 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
588 2009-04-20 David Daney <ddaney@caviumnetworks.com>
590 * NEWS: Mention MIPS/Linux hardware watchpoint support.
592 2009-04-20 David Daney <ddaney@caviumnetworks.com>
594 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
595 (maint_show_dr, super_close): New variables.
596 (super_fetch_registers, super_store_registers): Make static.
597 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
598 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
599 (pt_watch_style): Define new enum.
600 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
602 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
604 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
605 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
606 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
607 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
608 (type_to_irw, fill_mask, try_one_watch)
609 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
610 (mips_linux_new_thread, populate_regs_from_watches)
611 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
612 (mips_linux_close): New functions.
613 (_initialize_mips_linux_nat): Register watchpoint functions with
614 the target_ops. Add show-debug-regs maintenance command.
616 2009-04-20 David Daney <ddaney@caviumnetworks.com>
618 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
620 2009-04-19 Pedro Alves <pedro@codesourcery.com>
622 * NEWS: Mention gdbserver support for x86 Windows CE.
624 2009-04-19 Eli Zaretskii <eliz@gnu.org>
626 * config/djgpp/fnchange.lst: Fix typos.
628 Set default host and target charsets in the DJGPP port.
630 * config/djgpp/config.sed (am_cv_langinfo_codeset)
631 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
632 in all configure scripts that define ac_cv_env_CPP_value.
634 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
637 * config/djgpp/nl_types.h: New file.
639 * config/djgpp/langinfo.h: New file.
641 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
643 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
645 * Makefile.in (MAKEHTML): Set to makeinfo --html.
646 (MAKEHTMLFLAGS): Set to empty.
648 2009-04-18 Eli Zaretskii <eliz@gnu.org>
650 * NEWS: Mention all new set/show commands added since GDB 6.8 was
653 * go32-nat.c (go32_sysinfo): Check if the call to
654 __dpmi_get_capabilities fills the buffer with information, and
655 don't use the buffer if not.
657 2009-04-17 Tom Tromey <tromey@redhat.com>
659 * charset.c (_initialize_charset): Add special case for "646".
661 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
663 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
664 * configure: Regenerate.
665 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
666 configure substitutions.
667 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
669 2009-04-17 Pierre Muller <muller.u-strasbg.fr>
671 ARI fix: Do not use %p, replace by call to host_address_to_string
673 * darwin-nat.c (darwin_xfer_partial): Apply change.
674 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
675 * gnu-nat.h (proc_debug): Ditto.
676 * symmisc.c (maintenance_info_symtabs): Ditto.
677 (maintenance_info_psymtabs): Ditto.
678 * windows-nat.c (handle_load_dll): Ditto.
679 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
680 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
682 2009-04-17 Joseph Myers <joseph@codesourcery.com>
684 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
686 (sparc-*-linux*): Likewise.
688 2009-04-17 Eli Zaretskii <eliz@gnu.org>
690 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
693 2009-04-16 Pedro Alves <pedro@codesourcery.com>
695 * remote.c (remote_query_attached): Fix pasto in packet_ok result
698 2009-04-16 Joel Brobecker <brobecker@adacore.com>
700 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
701 Revert the previous change. Might not be correct, actually.
703 2009-04-16 Joel Brobecker <brobecker@adacore.com>
705 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
706 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
707 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
708 Remove declaration. These are non-existent functions.
710 2009-04-16 Joel Brobecker <brobecker@adacore.com>
712 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
713 Fix a compilation warning on mips-irix due to casting from
714 a pointer of different size.
716 2009-04-16 Joel Brobecker <brobecker@adacore.com>
718 * ada-lang.c (symtab_for_sym): Delete.
719 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
721 2009-04-16 Joel Brobecker <brobecker@adacore.com>
723 * ada-lang.c (extract_string): Delete.
724 (ada_main_name): Reimplement using target_read_string instead of
727 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
729 * m68klinux-nat.c: Remove obsolete comment.
730 (fetch_register, store_register): Don't call
731 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
732 which are always nops here.
734 2009-04-14 Tom Tromey <tromey@redhat.com>
736 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
737 (c_printstr): Likewise.
738 * charset.c: Include gdb_wait.h.
739 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
740 (find_charset_names): Use pexecute. Handle libiconv's output.
742 (_initialize_charset): Use xstrdup.
743 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
745 (INTERMEDIATE_ENCODING): New define.
746 * configure, config.in: Rebuild.
747 * configure.ac: Check for btowc.
749 2009-04-15 Tom Tromey <tromey@redhat.com>
751 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
753 2009-04-15 Eli Zaretskii <eliz@gnu.org>
755 * utils.c (parse_escape): Initialize target_char to pacify GCC.
757 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
759 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
761 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
763 ARI fix: sprintf rule.
764 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
765 * ada-lang.c (add_angle_brackets): Use xstrprintf.
766 (ada_decode): Replace sprintf by xsnprintf.
767 (find_old_style_renaming_symbol): Ditto.
768 (ada_to_fixed_type_1, ada_enum_name): Ditto.
771 2009-04-14 Joel Brobecker <brobecker@adacore.com>
773 * target.c (target_mourn_inferior): Call bfd_cache_close_all
774 after having executed the target mourn_inferior routine.
776 2009-04-14 Eli Zaretskii <eliz@gnu.org>
778 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
781 2009-04-13 David Daney <ddaney@caviumnetworks.com>
783 * infrun.c (maybe_software_singlestep): New function.
784 (resume): Call maybe_software_singlestep.
785 (handle_inferior_event): Same.
787 2009-04-13 Tom Tromey <tromey@redhat.com>
789 * python/python-frame.c (frapy_richcompare): Return
790 Py_NotImplemented, not an error. Handle Py_NE as well.
792 2009-04-13 Eli Zaretskii <eliz@gnu.org>
794 * charset.c (EILSEQ): Define if not defined by system headers.
796 2009-04-11 Eli Zaretskii <eliz@gnu.org>
798 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
799 to be consistent with renaming config.intl.in into config_intl.in.
801 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
802 consistent with the change from 2008-11-09.
804 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
806 * gdbtypes.c: Remove excessive parentheses at the return keywords.
807 * varobj.c (varobj_invalidate): Fix indentation.
808 * varobj.c (varobj_invalidate): Fix formatting text width.
810 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
812 Implement -exec-jump.
814 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
815 * mi/mi-main.c (mi_cmd_exec_jump): New.
816 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
818 2009-04-07 Doug Evans <dje@google.com>
820 * symfile.c (symbol_file_clear): Fix indentation.
822 2009-04-06 Mark Kettenis <kettenis@gnu.org>
824 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
826 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
828 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
829 (ppc_linux_auxv_parse): New function.
830 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
831 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
833 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
835 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
836 BFD to contents of SPU name note.
837 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
838 with "from_tty" argument 1 instead of 0.
840 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
843 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
844 Create the symbol in local scope.
845 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
847 2009-04-02 Keith Seitz <keiths@redhat.com>
849 * stabsread.c (read_member_functions): GCC may emit an extra space
850 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
851 whitespace when looking for these functions.
853 2009-04-01 Joel Brobecker <brobecker@adacore.com>
855 Change the default value for "set print frame-arguments" to scalars.
857 * stack.c (print_frame_arguments): Set initial value to "scalars".
859 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
861 * mips-tdep.c (mips_numeric_register_alieses): New definition.
862 (mips_gdbarch_init): Add user registers from
863 mips_numeric_register_aliases.
865 2009-04-01 Joel Brobecker <brobecker@adacore.com>
867 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
869 2009-04-01 Joel Brobecker <brobecker@adacore.com>
871 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
872 this is the last one.
874 2009-04-01 Pedro Alves <pedro@codesourcery.com>
876 * remote.c (append_resumption): New.
877 (remote_vcont_resume): Use it.
879 2009-04-01 Joel Brobecker <brobecker@adacore.com>
881 * windows-nat.c (+windows_get_ada_task_ptid): New function.
882 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
884 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
885 Keith Seitz <keiths@redhat.com>
886 Jan Kratochvil <jan.kratochvil@redhat.com>
889 * Makefile.in (dbxread.o): Update.
890 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
891 * dwarf2read.c (GDB_FORM_cached_string): New.
892 (read_partial_die): Use dwarf2_canonicalize_name.
893 (dwarf2_linkage_name): Use dwarf2_name.
894 (dwarf2_canonicalize_name): New.
895 (dwarf2_name): Use dwarf2_canonicalize_name.
896 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
897 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
898 * symtab.c (lookup_symbol_in_language): Canonicalize input before
900 * cp-name-parser.y: operator() requires two parameters,
901 according to libiberty.
902 * minsyms.c (lookup_minimal_symbol): Canonicalize input
906 2009-03-31 Joel Brobecker <brobecker@adacore.com>
908 Provide support for (Ada) task-specific breakpoints.
910 * ada-lang.h (ada_get_task_number): Add declaration.
911 (breakpoint_ada_task_match): Delete declaration.
912 * ada-tasks.c (ada_get_task_number): Make non-static.
913 * breakpoint.h (struct breakpoint): Add field "task".
914 * breakpoint.c (print_one_breakpoint_location): Add handling of
915 task-specific breakpoints.
916 (create_breakpoint, create_breakpoints, find_condition_and_thread):
917 New parameter "task".
918 (break_command_really): Update calls to find_condition_and_thread
919 and create_breakpoints.
920 (breakpoint_re_set_one): Update call to find_condition_and_thread.
923 2009-03-31 Joel Brobecker <brobecker@adacore.com>
925 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
927 2009-03-31 Pedro Alves <pedro@codesourcery.com>
929 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
930 if the thread's ptid without a thread id field is in the list
931 before calling thread_change_ptid.
932 (extended_remote_attach_1): In non-stop mode, do not rely on
933 querying the current thread, instead, query the thread list, and
934 select the first thread of the process.
935 * gdbthread.h (first_thread_of_process): Declare.
936 * thread.c (first_thread_of_process): Define.
938 2009-03-30 Stan Shebs <stan@codesourcery.com>
940 Make tracepoints into a type of breakpoint.
941 * breakpoint.h (enum bptype): Add bp_tracepoint.
942 (struct breakpoint): Add fields step_count, pass_count, actions.
943 (get_tracepoint, get_tracepoint_by_number): Declare.
944 (all_tracepoints): Declare.
945 * breakpoint.c: Include tracepoint.h, readline.h.
946 (ALL_TRACEPOINTS): Move here from tracepoint.c.
947 (tracepoint_count): Ditto.
948 (should_be_inserted): GDB does not insert tracepoints itself.
949 (print_it_typical): Add tracepoint case.
950 (bpstat_what): Ditto.
951 (print_one_breakpoint_location): Ditto, and add printing for
952 pass count, step count, and action list.
953 (user_settable_breakpoint): Add tracepoint case.
954 (allocate_bp_location): Ditto.
955 (set_breakpoint_location_function): Ditto.
956 (disable_breakpoints_in_shlibs): Ditto.
958 (break_command_really): Add argument traceflag, use to choose
959 basic breakpoint type.
960 (break_command_1): Pass extra argument.
961 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
962 (breakpoint_re_set_one): Add tracepoint case.
963 (disable_command, enable_command): Ditto.
964 (set_tracepoint_count): Move here from tracepoint.c.
965 (trace_command): Move here from tracepoint.c and use
966 break_command_really.
967 (tracepoints_info): Move here from tracepoint.c and call
969 (enable_trace_command): Move here from tracepoint.c and call
971 (disable_trace_command): Move here from tracepoint.c and call
973 (delete_trace_command): Move here from tracepoint.c and call
975 (trace_pass_command): Move here from tracepoint.c.
976 (get_tracepoint_by_number): Ditto.
977 (tracepoint_save_command): Ditto.
978 (get_tracepoint): New function.
979 (all_tracepoints): New function.
980 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
981 deprecate "enable trace" and "disable trace" commands.
982 * tracepoint.h (struct tracepoint): Remove.
983 (tracepoint_chain): Remove decl.
984 (deprecated_create_tracepoint_hook): Remove decl.
985 (deprecated_delete_tracepoint_hook): Remove decl.
986 (deprecated_modify_tracepoint_hook): Remove decl.
987 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
988 (free_actions): Update signature.
989 (validate_actionline): Update signature.
990 (end_actions_pseudocommand): Declare.
991 (while_stepping_pseudocommand): Declare.
992 * tracepoint.c: Include breakpoint.h.
993 (tracepoint_chain, tracepoint_count): Remove.
994 (free_actions, make_cleanup_free_actions): Update signature.
995 (trace_command, set_raw_tracepoint): Remove.
996 (trace_mention): Remove.
997 (tracepoints_info): Remove.
998 (tracepoint_operation, map_args_over_tracepoints): Remove.
999 (get_tracepoint_by_number): Remove.
1000 (enable_trace_command, disable_trace_command): Remove.
1001 (delete_trace_command, trace_pass_command): Remove.
1002 (trace_actions_command, read_actions): Update signature.
1003 (validate_actionline): Update signature, use bp loc.
1004 (encode_actions): Ditto.
1005 (download_tracepoint): New function, body of trace_start_command.
1006 (trace_start_command): Call it, use all_tracepoints.
1007 (tracepoint_save_command): Remove.
1008 (tracepoint_dump_command): Use get_tracepoint.
1009 (end_actions_pseudocommand): Make globally visible.
1010 (while_stepping_pseudocommand): Ditto.
1011 (_initialize_tracepoint): Move command definitions to breakpoint.c.
1013 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
1015 Expose frames to Python.
1016 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
1017 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
1018 (python-frame.o): New target.
1019 * python/python-frame.c: New file.
1020 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
1021 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
1022 gdbpy_initialize_frames): New prototypes.
1023 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
1024 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
1026 * stack.c (find_frame_funname): New function, factored out of
1028 (print_frame): Call find_frame_funname.
1029 * stack.h (find_frame_funname): Add prototype.
1031 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1033 Remove unused value_object attribute `owned_by_gdb'.
1034 * python/python-value.c (value_object): Remove owned_by_gdb
1036 (valpy_dealloc): Remove reference to self->owned_by_gdb.
1037 (valpy_new): Likewise.
1038 (value_to_value_object): Likewise.
1040 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1042 Change gdb.Value.address from a method to an attribute.
1043 * python/python-value.c (value_object): Add `address' element.
1044 (valpy_dealloc): Decrement reference to self->address if set.
1045 (valpy_new): Initialize val_obj->address.
1046 (valpy_address): Rename to ...
1047 (valpy_get_address): ... this. Change signature from method to
1048 attribute. Update self->address if not set.
1049 (value_to_value_object): Initialize val_obj->address.
1050 (value_object_getset): Add `address' element.
1051 (value_object_methods): Remove `address' element.
1053 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
1055 * observer.sh: Set LANG/LC_ALL to C, not c.
1057 2009-03-28 Kevin Buettner <kevinb@redhat.com>
1059 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
1062 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1064 * remote.c (remote_stop_ns): If multi-process extensions are off,
1065 and GDB is requesting the whole process to stop, sent "vCont;t",
1068 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1070 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
1073 2009-03-27 Eli Zaretskii <eliz@gnu.org>
1075 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
1077 2009-03-26 Doug Evans <dje@google.com>
1079 * thread.c (do_restore_current_thread_cleanup): Redo test for
1080 whether to restore old->inferior_ptid.
1082 2009-03-26 Tom Tromey <tromey@redhat.com>
1084 * breakpoint.c (resolve_sal_pc): Preserve original line number
1085 when skipping prologue.
1087 2009-03-26 Doug Evans <dje@google.com>
1089 * thread.c (inferior_thread) Remove "extern" in definition.
1091 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
1093 Add gdb.Value.is_optimized_out attribute.
1094 * python/python-value.c (valpy_get_is_optimized_out): New
1096 (value_object_getset): New variable.
1097 (value_object_type): Initialize tp_getset element.
1099 2009-03-26 Joel Brobecker <brobecker@adacore.com>
1101 Recognize missing DW_AT_location as <value optimized out>.
1103 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
1104 Call add_symbol_to_list.
1106 2009-03-25 Tom Tromey <tromey@redhat.com>
1108 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
1109 * stack.c (print_this_frame_argument_p): Use check_typedef.
1111 2009-03-25 Tom Tromey <tromey@redhat.com>
1113 * configure: Rebuild.
1114 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
1115 Rearrange flags setting. Add comments.
1117 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1119 * config/i386/nm-i386.h: Remove code within
1120 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
1121 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
1123 * config/i386/nm-cygwin64.h: Ditto.
1124 * config/i386/nm-fbsd.h: Ditto.
1125 * config/i386/nm-go32.h: Ditto.
1126 * config/i386/nm-linux.h: Ditto.
1127 * config/i386/nm-linux64.h: Ditto.
1129 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1131 ARI fix: "xasprintf" rule.
1132 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
1134 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1136 * remote.c (remote_start_remote): In non-stop mode, call
1137 init_wait_for_inferior before adding threads and inferiors.
1139 2009-03-25 Joel Brobecker <brobecker@adacore.com>
1141 * breakpoint.c (breakpoint_thread_match): Split a large condition
1142 into several smaller conditions. No behavior change.
1144 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1146 * infrun.c (infrun_thread_thread_exit): New.
1147 (_initialize_infrun): Attach it to the thread_exit observer.
1148 * thread.c (delete_thread_1): Always call the observer, passing it
1150 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
1151 SILENT, return immediately.
1153 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1155 * infrun.c (normal_stop): Use has_stack_frames instead of
1157 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
1158 when there is no thread selected.
1159 (mi_cmd_execute): Don't special case commands that can run without
1160 a valid selected thread.
1161 * top.c (execute_command): Don't special case commands that can
1162 run without a valid selected thread. Use has_stack_frames.
1163 * infcmd.c (ensure_valid_thread): New.
1164 (continue_1, step_1, jump_command, signal_command): Use it.
1165 (detach_command): Error out if there's no selected thread/inferior.
1166 * thread.c (print_thread_info): Allow having no thread selected.
1167 (switch_to_thread): Don't read the PC if there is no current thread.
1168 (do_restore_current_thread_cleanup): Don't record the current
1169 frame if there is no current thread.
1170 (make_cleanup_restore_current_thread): Don't read frame info if
1171 there is no selected thread.
1172 (_initialize_thread): Don't mark commands as
1173 "no_selected_thread_ok".
1174 * frame.c (get_current_frame): Error out if there is no valid
1176 (has_stack_frames): Return false if there is no valid
1178 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
1179 "no_selected_thread_ok".
1180 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
1181 (get_cmd_no_selected_thread_ok): Delete.
1182 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
1183 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
1185 * stack.c (get_selected_block): Use has_stack_frames.
1187 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
1189 Fix size of FPSCR in Power 7 processors.
1190 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
1191 (PPC_FEATURE_HAS_DFP): New #define.
1192 (ppc_linux_read_description): Check for DFP feature instead of
1193 ISA 2.05 to decide on size of the FPSCR.
1195 2009-03-25 Kevin Buettner <kevinb@redhat.com>
1197 * mn10300-tdep.c (trad-frame.h): Don't include.
1198 (prologue-value.h): Include.
1199 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
1200 (struct mn10300_prologue): Define.
1201 (push_reg, translate_rreg, check_for_saved): New functions.
1202 (mn10300_analyze_prologue): Rewrite, using prologue-value
1203 machinery. Handle more instructions than before. Permit
1204 instructions to occur in any order.
1205 (mn10300_skip_prologue): Find the extents of the function
1206 in question; mn10300_analyze_prologue no longer does this.
1207 (mn10300_analyze_frame_prologue): New function.
1208 (mn10300_frame_base): New function.
1209 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
1211 (mn10300_frame_prev_register): Likewise.
1212 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
1213 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
1215 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
1217 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1219 Fix completer problem for filename completion on the first try.
1221 * gdb/completer.h (gdb_completion_word_break_characters): New function.
1222 * gdb/completer.c: Include gdb_assert.h.
1223 (complete_line_internal_reason): New enum.
1224 (complete_line_internal): Change last argument type to
1225 complete_line_internal_reason.
1226 Modify function to handle the different complete_line_internal_reason
1228 (complete_line): Adapt to change in complete_line_internal.
1229 (command_completer): Ditto.
1230 (gdb_completion_word_break_characters): Implement new function.
1231 * top.c (init_main): Set rl_completion_word_break_hook to
1232 gdb_completion_word_break_characters.
1235 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1237 ARI fix: "strlen d_name" rule.
1238 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
1241 2009-03-24 Tom Tromey <tromey@redhat.com>
1242 Pedro Alves <pedro@codesourcery.com>
1244 * configure, config.in: Rebuild.
1245 * configure.ac: Check for libiconvlist.
1246 * charset.c: Check HAVE_LIBICONVLIST.
1247 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
1248 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
1249 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
1251 (INTERNAL_CFLAGS_BASE): Update.
1252 (INTERNAL_LDFLAGS): Update.
1255 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1257 * configure.ac: Initialize the variable $PREFER_CURSES.
1258 * configure: Regenerated.
1260 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1262 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
1263 * configure: Regenerated.
1265 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
1267 ARI fix: "strerror" rule.
1268 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
1269 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
1271 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1273 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
1274 before looking up the fields inside our struct type.
1276 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1278 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
1279 trying to resolve the type qualification.
1281 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1283 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
1284 we try to apply the attribute on the real type, rather than
1285 its associated typedef.
1287 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1289 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
1290 to make sure we try to get the modulus of the actual type, not the
1293 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1295 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
1296 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
1297 to get the real type, not the associated typedef.
1299 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1301 * ada-lang.c (ada_get_field_index): Add handling of the case
1302 when TYPE is a typedef of a struct.
1304 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1306 Add gdb_usleep as a portable version of usleep based on gdb_select.
1307 * gdb_usleep.h, gdb_usleep.c: New files.
1308 * Makefile.in (SFILES): Add gdb_usleep.c.
1309 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
1310 (COMMON_OBS): Add gdb_usleep.o.
1311 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
1312 by call to gdb_usleep.
1314 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1316 * buildsym.c (end_symtab): If we ignore the subfiles, then
1317 unlink the associated symtabs if they were already allocated.
1319 2009-03-23 Jerome Guitton <guitton@adacore.com>
1321 Provide a way to force building of GDB with libcurses.
1322 * configure.ac: Add --with-curses.
1323 * configure: Regenerated.
1325 2009-03-23 Tom Tromey <tromey@redhat.com>
1327 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
1330 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
1332 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
1333 solib_contains_address_p instead of searching.
1335 2009-03-23 Tom Tromey <tromey@redhat.com>
1337 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
1338 (iconv): Make 'inbuf' argument const.
1339 (convert_between_encodings): Use ICONV_CONST.
1340 (wchar_iterate): Likewise.
1342 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1344 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
1345 dynamically loaded function.
1346 (LookupPrivilegeValueA): Ditto.
1347 (OpenProcessToken): Ditto.
1348 (AdjustTokenPrivileges): Rename and define placeholder for address of
1349 dynamically loaded function.
1350 (LookupPrivilegeValueA): Ditto.
1351 (OpenProcessToken): Ditto.
1352 (set_process_privilege): Remove check for loaded functions.
1353 (bad_OpenProcessToken): Define.
1354 (_initialize_loadable): Load token functions from advapi here, setting
1355 OpenProcessToken function to a dummy static function which always return
1356 error if OS doesn't support this functionality.
1358 2009-03-22 Nicolas Roche <roche@adacore.com>
1359 Christopher Faylor <me+cygwin@cgf.cx>
1361 * win32-nat.c (ctrl_c_handler): New function.
1362 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
1363 is run in a separate console.
1365 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1367 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
1368 for dynamically loaded function.
1369 (DebugBreakProcess): Ditto.
1370 (DebugSetProcessKillOnExit): Ditto.
1371 (EnumProcessModules): Ditto.
1372 (GetModuleFileNameExA): Ditto.
1373 (GetModuleInformation): Ditto.
1374 (DebugActiveProcessStop): Rename and define placeholder for address of
1375 dynamically loaded function.
1376 (DebugBreakProcess): Ditto.
1377 (DebugSetProcessKillOnExit): Ditto.
1378 (EnumProcessModules): Ditto.
1379 (GetModuleFileNameExA): Ditto.
1380 (GetModuleInformation): Ditto.
1381 (psapi_loaded): Delete.
1382 (get_module_name): Don't check psapi_loaded, just rely on the fact that
1383 dynamically loaded functions will return failure if they weren't
1385 (has_detach_ability): Delete.
1386 (windows_attach): Remove call to has_detach_ability (). Just rely on
1387 functions being callable.
1388 (bad_DebugActiveProcessStop): Define.
1389 (bad_DebugBreakProcess): Ditto.
1390 (bad_DebugSetProcessKillOnExit): Ditto.
1391 (bad_EnumProcessModules): Ditto.
1392 (bad_GetModuleFileNameExA): Ditto.
1393 (bad_GetModuleInformation): Ditto.
1394 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
1395 dynamic storage here, setting nonexistent functions to dummy static
1396 functions which always return error.
1398 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1400 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
1401 to the about_to_proceed observer notification.
1402 (mi_about_to_proceed): New.
1403 (mi_on_resume): Only output ^running and the prompt here if the
1404 target was proceeded.
1405 * breakpoint.c (breakpoint_proceeded): New static.
1406 (breakpoint_about_to_proceed): New.
1407 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
1408 the about_to_proceed observer notification.
1409 * inferior.h (breakpoint_proceeded): Delete declaration.
1410 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
1411 Notify the about_to_proceed observers.
1412 (struct inferior_status): Delete breakpoint_proceeded member.
1413 (save_inferior_status): Don't save it.
1414 (restore_inferior_status): Don't restore it.
1415 * mi-main.h (mi_proceeded): Declare.
1416 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
1419 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1421 * gdbthread.h (struct thread_info): Add in_infcall member.
1422 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
1423 Remove reverences to suppress_resume_observer. Refresh
1424 `call_thread' after returning from `proceed'.
1425 * infcmd.c (suppress_resume_observer): Delete.
1426 * inferior.h (suppress_resume_observer): Delete declaration.
1427 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
1429 * thread.c (set_running): Remove references to
1430 suppress_resume_observer.
1431 * infrun.c (struct inferior_status): Add in_infcall member.
1432 (save_inferior_status): Save it.
1433 (restore_inferior_status): Restore it.
1435 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1437 * infcall.c (run_inferior_call): Remove references to
1438 suppress_stop_observer.
1439 * infcmd.c (suppress_stop_observer): Delete.
1440 (finish_command_continuation): Remove NOTE. Don't clear
1441 suppress_stop_observer anymore.
1442 (finish_command_continuation_free_arg): Likewise.
1443 (finish_forward): Remove references to suppress_stop_observer.
1444 Call normal_stop observer if we haven't already.
1445 * inferior.h (suppress_stop_observer): Delete.
1446 * infrun.c (normal_stop): When deciding to suppress the
1447 normal_stop observer, check for proceed_to_finish instead of
1448 suppress_stop_observer.
1450 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1452 * symfile.c (symfile_relocate_debug_section): Remove check for
1455 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1456 Jim Blandy <jimb@red-bean.com>
1457 Thiago Jung Bauermann <bauerman@br.ibm.com>
1458 Tom Tromey <tromey@redhat.com>
1460 Miscellaneous fixes to the Python code.
1461 * python/python-cmd.c (cmdpy_init): Accept keyword
1463 * python/python-value.c (valpy_string): Accept keyword
1465 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
1466 Do not call value_to_value_object on NULL RES_VAL.
1467 (value_object_methods): Change `string' entry to also accept
1469 (convert_value_from_python): Return a copy of the value if obj is
1471 (value_object_methods): Mark the `string' method as accepting
1472 keywords, and show method "prototype" in the doc string.
1473 * python/python.c (get_parameter): Don't return inside a
1476 2009-03-20 Tom Tromey <tromey@redhat.com>
1478 Add support for convenience functions in Python.
1479 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
1480 (SUBDIR_PYTHON_SRCS): Add python-function.c.
1481 (python-function.o): New target.
1482 * eval.c: Include "python/python.h" and <ctype.h>.
1483 (evaluate_subexp_standard): Handle values of type
1484 TYPE_CODE_INTERNAL_FUNCTION.
1485 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
1486 * parse.c (write_exp_string): Remove duplicate word in comment.
1487 * python/python-function.c: New file.
1488 * python/python-internal.h (gdbpy_initialize_functions): Add
1490 * python/python.c (_initialize_python): Call
1491 gdbpy_initialize_functions.
1492 * valprint.c (value_check_printable): Handle values of type
1493 TYPE_CODE_INTERNAL_FUNCTION.
1494 * value.c: Include "cli/cli-decode.h".
1495 (internal_function): New struct.
1496 (functionlist, internal_fn_type): New static variables.
1497 (lookup_only_internalvar,
1498 lookup_internalvar): Add const qualifier to name argument.
1499 (create_internalvar): Likewise. Initialize new field.
1500 (set_internal_var): Fix typo in comment. Don't allow assignment
1501 to canonical variable.
1502 (value_create_internal_function, value_internal_function_name,
1503 call_internal_function, function_command, function_destroyer,
1504 add_internal_function): New functions.
1505 (_initialize_values): Create `function' placeholder command.
1506 Initialize internal_fn_type.
1507 * value.h (lookup_only_internalvar, create_internalvar,
1508 lookup_internalvar): Add const qualifier to name argument.
1509 (internal_function_fn, add_internal_function, call_internal_function,
1510 value_internal_function_name): Add prototypes.
1511 (struct internalvar) <canonical>: New field.
1513 2009-03-20 Tom Tromey <tromey@redhat.com>
1515 * c-lang.c (evaluate_subexp_c): Call check_typedef.
1517 2009-03-20 Tom Tromey <tromey@redhat.com>
1518 Julian Brown <julian@codesourcery.com>
1520 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
1521 PR i18n/9401, PR exp/9613:
1523 * value.h (value_typed_string): Declare.
1524 (val_print_string): Update.
1525 * valprint.h (print_char_chars): Update.
1526 * valprint.c (print_char_chars): Add type argument. Update.
1527 (val_print_string): Likewise.
1528 * valops.c (value_typed_string): New function.
1529 * utils.c (host_char_to_target): New function.
1530 (parse_escape): Use host_char_to_target, host_hex_value. Update.
1532 (no_control_char_error): Remove.
1533 * typeprint.c (print_type_scalar): Update.
1534 * scm-valprint.c (scm_scmval_print): Update.
1535 * scm-lang.h (scm_printchar, scm_printstr): Update.
1536 * scm-lang.c (scm_printchar): Add type argument.
1537 (scm_printstr): Likewise.
1538 * printcmd.c (print_formatted): Update.
1539 (print_scalar_formatted): Update.
1540 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
1541 Handle '%lc' and '%ls'.
1542 * parser-defs.h (struct typed_stoken): New type.
1543 (struct stoken_vector): Likewise.
1544 (write_exp_string_vector): Declare.
1545 * parse.c (write_exp_string_vector): New function.
1546 * p-valprint.c (pascal_val_print): Update.
1547 * p-lang.h (is_pascal_string_type, pascal_printchar,
1548 pascal_printstr): Update.
1549 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
1550 Add 'char_type' argument.
1551 (pascal_emit_char): Add type argument.
1552 (pascal_printchar): Likewise.
1553 (pascal_printstr): Likewise.
1554 * objc-lang.c (objc_emit_char): Add type argument.
1555 (objc_printchar): Likewise.
1556 (objc_printstr): Likewise.
1557 * macroexp.c (get_character_constant): Handle unicode characters.
1559 (get_string_literal): Handle unicode strings. Use
1561 * m2-valprint.c (print_unpacked_pointer): Update.
1562 (m2_print_array_contents): Update.
1563 (m2_val_print): Update.
1564 * m2-lang.c (m2_emit_char): Add type argument.
1565 (m2_printchar): Likewise.
1566 (m2_printstr): Likewise.
1567 * language.h (struct language_defn) <la_printchar>: Add type
1569 <la_printstr, la_emitchar>: Likewise.
1570 (LA_PRINT_CHAR): Likewise.
1571 (LA_PRINT_STRING): Likewise.
1572 (LA_EMIT_CHAR): Likewise.
1573 * language.c (unk_lang_emit_char): Add type argument.
1574 (unk_lang_printchar): Likewise.
1575 (unk_lang_printstr): Likewise.
1576 * jv-valprint.c (java_val_print): Update.
1577 * jv-lang.c (java_emit_char): Add type argument.
1578 * f-valprint.c (f_val_print): Update.
1579 * f-lang.c (f_emit_char): Add type argument.
1580 (f_printchar): Likewise.
1581 (f_printstr): Likewise.
1582 * expprint.c (print_subexp_standard): Update.
1583 * charset.h (target_wide_charset): Declare.
1584 (c_target_char_has_backslash_escape, c_parse_backslash,
1585 host_char_print_literally, host_char_to_target,
1586 target_char_to_host, target_char_to_control_char): Remove.
1587 (enum transliterations): New type.
1588 (convert_between_encodings): Declare.
1589 (HOST_ESCAPE_CHAR): New define.
1590 (host_letter_to_control_character, host_hex_value): Declare.
1591 (enum wchar_iterate_result): New enum.
1592 (struct wchar_iterator): Declare.
1593 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1594 wchar_push_back): Declare.
1595 * charset-list.h: New file.
1596 * c-valprint.c (textual_name): New function.
1597 (textual_element_type): Handle wide character types.
1598 (c_val_print): Pass original type to textual_element_type. Handle
1599 wide character types.
1600 (c_value_print): Use textual_element_type. Pass original type of
1602 * c-lang.h (enum c_string_type): New type.
1603 (c_printchar, c_printstr): Update.
1604 * c-lang.c (classify_type): New function.
1605 (print_wchar): Likewise.
1606 (c_emit_char): Add type argument. Handle wide characters.
1607 (c_printchar): Likewise.
1608 (c_printstr): Add type argument. Handle wide and multibyte
1610 (convert_ucn): New function.
1611 (emit_numeric_character): Likewise.
1612 (convert_octal): Likewise.
1613 (convert_hex): Likewise.
1614 (ADVANCE): New macro.
1615 (convert_escape): New function.
1616 (parse_one_string): Likewise.
1617 (evaluate_subexp_c): Likewise.
1618 (exp_descriptor_c): New global.
1619 (c_language_defn): Use exp_descriptor_c.
1620 (cplus_language_defn): Likewise.
1621 (asm_language_defn): Likewise.
1622 (minimal_language_defn): Likewise.
1623 (charset_for_string_type): New function.
1624 * c-exp.y (%union): Add 'svec' and 'tsval'.
1626 (exp): Add CHAR production.
1627 (string_exp): Rewrite.
1628 (exp) <string_exp>: Rewrite.
1629 (tempbuf): Now global.
1630 (tempbuf_init): New global.
1631 (parse_string_or_char): New function.
1632 (yylex) <tempbuf>: Now global.
1633 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
1635 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
1636 (c_parse_escape): New function.
1637 * auxv.c (fprint_target_auxv): Update.
1638 * ada-valprint.c (ada_emit_char): Add type argument.
1639 (ada_printchar): Likewise.
1640 (ada_print_scalar): Update.
1641 (printstr): Add type argument. Update calls to ada_emit_char.
1642 (ada_printstr): Add type argument.
1643 (ada_val_print_array): Update.
1644 (ada_val_print_1): Likewise.
1645 * ada-lang.c (emit_char): Add type argument.
1646 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
1648 * gdb_locale.h: Include langinfo.h.
1649 * charset.c (_initialize_charset): Set default host charset from
1650 the locale. Don't register charsets. Add target-wide-charset
1651 commands. Call find_charset_names.
1652 (struct charset, struct translation): Remove.
1653 (GDB_DEFAULT_HOST_CHARSET): Remove.
1654 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
1655 (target_wide_charset_name): New global.
1656 (show_host_charset_name): Handle "auto".
1657 (show_target_wide_charset_name): New function.
1658 (host_charset_enum, target_charset_enum): Remove.
1659 (charset_enum): New global.
1660 (all_charsets, register_charset, lookup_charset, all_translations,
1661 register_translation, lookup_translation): Remove.
1662 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
1663 (iso_8859_print_literally, iso_8859_to_control,
1664 iso_8859_family_charset): Remove.
1665 (ebcdic_print_literally, ebcdic_to_control,
1666 ebcdic_family_charset): Remove.
1667 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
1668 register_iconv_charsets): Remove.
1669 (target_wide_charset_be_name, target_wide_charset_le_name): New
1671 (identity_either_char_to_other): Remove.
1672 (set_be_le_names, validate): New functions.
1673 (backslashable, backslashed, represented): Remove.
1674 (default_c_target_char_has_backslash_escape): Remove.
1675 (default_c_parse_backslash, iconv_convert): Remove.
1676 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
1677 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
1678 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
1679 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
1680 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
1681 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
1682 (table_convert_char, table_translation, simple_table_translation):
1684 (current_host_charset, current_target_charset,
1685 c_target_char_has_backslash_escape_func,
1686 c_target_char_has_backslash_escape_baton): Remove.
1687 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
1688 (host_char_to_target_func, host_char_to_target_baton): Remove.
1689 (target_char_to_host_func, target_char_to_host_baton): Remove.
1690 (cached_iconv_host_to_target, cached_iconv_target_to_host):
1692 (lookup_charset_or_error, check_valid_host_charset): Remove.
1693 (set_host_and_target_charsets): Remove.
1694 (set_host_charset, set_target_charset): Remove.
1695 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
1696 (set_target_wide_charset_sfunc): New function.
1697 (show_charset): Print target wide character set.
1698 (host_charset, target_charset): Rewrite.
1699 (target_wide_charset): New function.
1700 (c_target_char_has_backslash_escape): Remove.
1701 (c_parse_backslash): Remove.
1702 (host_letter_to_control_character): New function.
1703 (host_char_print_literally): Remove.
1704 (host_hex_value): New function.
1705 (target_char_to_control_char): Remove.
1706 (cleanup_iconv): New function.
1707 (convert_between_encodings): New function.
1708 (target_char_to_host): Remove.
1709 (struct wchar_iterator): Define.
1710 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1711 wchar_push_back): New functions.
1712 (do_cleanup_iterator): New function.
1713 (char_ptr): New typedef.
1714 (charsets): New global.
1715 (add_one, find_charset_names): New functions.
1716 (default_charset_names): New global.
1717 (auto_host_charset_name): Likewise.
1718 * aclocal.m4, config.in, configure: Rebuild.
1719 * configure.ac: Call AM_LANGINFO_CODESET.
1720 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
1721 (AM_ICONV): Invoke earlier.
1722 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
1723 LIBICONV_LIBDIR. Check for libiconv in build tree.
1724 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
1725 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
1726 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
1727 * gdb_obstack.h (obstack_grow_wstr): New define.
1728 * gdb_wchar.h: New file.
1729 * defs.h: Include it.
1731 2009-03-20 Tom Tromey <tromey@redhat.com>
1732 Jan Kratochvil <jan.kratochvil@redhat.com>
1734 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
1735 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
1737 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
1739 * ada-typeprint.c (print_array_type): Do the NULL check
1742 2009-03-19 Tom Tromey <tromey@redhat.com>
1744 * utils.c (do_obstack_free): New function.
1745 (make_cleanup_obstack_free): Likewise.
1746 * defs.h (make_cleanup_obstack_free): Declare.
1748 2009-03-18 Doug Evans <dje@google.com>
1750 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
1751 int, not a long long.
1752 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
1754 * expprint.c (dump_raw_expression): Print note if non-NULL.
1756 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
1759 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
1761 * Makefile.in: Update license to GPLv3.
1762 * ada-exp.y: Update license to GPLv3.
1763 * ada-lex.l: Update license to GPLv3.
1764 * c-exp.y: Update license to GPLv3.
1765 * cp-name-parser.y: Update license to GPLv3.
1766 * darwin-nat-info.c: Update license to GPLv3.
1767 * f-exp.y: Update license to GPLv3.
1768 * gdb_thread_db.h: Update license to GPLv3.
1769 * hppanbsd-nat.c: Update license to GPLv3.
1770 * hppanbsd-tdep.c: Update license to GPLv3.
1771 * hppaobsd-tdep.c: Update license to GPLv3.
1772 * jv-exp.y: Update license to GPLv3.
1773 * m2-exp.y: Update license to GPLv3.
1774 * objc-exp.y: Update license to GPLv3.
1775 * p-exp.y: Update license to GPLv3.
1776 * reply_mig_hack.awk: Update license to GPLv3.
1777 * reverse.c: Update license to GPLv3.
1778 * xtensa-xtregs.c: Update license to GPLv3.
1780 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1782 * remote.c (remote_close): Don't call generic_mourn_inferior.
1783 (remote_mourn_1): Call generic_mourn_inferior after closing the
1786 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1788 * remote.c (remote_start_remote): Add missing call to
1789 init_wait_for_inferior in non-stop mode.
1791 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1793 * breakpoint.c (bpstat_should_step): Only consider software
1794 watchpoints that have a location.
1796 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1798 Add a target_ops parameter to the to_kill method in struct target_ops.
1800 * target.h (struct target_ops): Add a "target_ops *" parameter to
1802 (target_kill): Remove macro. Add declaration.
1803 * target.c (debug_to_kill): Delete, no longer necessary.
1804 (target_kill): New function.
1805 (update_current_target): Stop inheriting the to_kill method.
1806 Do not de_fault it to no_process either.
1807 (setup_target_debug): Do not set current_target.to_kill.
1808 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
1809 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
1810 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
1813 2009-03-17 Doug Evans <dje@google.com>
1815 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
1816 glibc 2.3.2 and earlier.
1818 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1820 * frame.c (get_prev_frame_1): Do not perform the inner_frame
1821 sanity check if this_frame is not NORMAL.
1822 (frame_id_inner): Update the description of this function.
1824 2009-03-17 Hui Zhu <teawater@gmail.com>
1826 * stack.c: Change the introduce of "disassemble-next-line".
1828 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1830 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
1833 2009-03-17 Hui Zhu <teawater@gmail.com>
1835 * stack.c: Include valprint.h.
1836 (disassemble_next_line): New enum.
1837 (show_disassemble_next_line): New function. Show the current
1838 value of disassemble-next-line.
1839 (gdb_disassembly_stub_args): New struct for argument passing
1840 between function do_gdb_disassembly and function
1841 gdb_disassembly_stub.
1842 (gdb_disassembly_stub): New function. Helper for
1844 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
1845 the exception from the gdb_disassembly because it will be
1846 broken by filter sometime.
1847 (print_frame_info): If disassemble-next-line is set to auto
1848 or on and doesn't have the line debug messages for $pc,
1849 output the next instruction.
1850 If disassemble-next-line is set to on and there is line debug
1851 messages, output assembly codes for next line.
1852 (_initialize_stack): Make the "set disassemble-next-line"
1853 command an auto-boolean command. Change its class to
1854 class_stack. Place it in the top level set list. Extend help
1855 to describe the auto mode.
1857 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1859 * infrun.c (normal_stop): Don't overwrite old_chain.
1861 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1863 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
1864 which is undefined, by call to regcache_invalidate, which should
1865 do what the original author wanted to do.
1867 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1869 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
1870 (mips_create_inferior): Likewise.
1872 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1874 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
1876 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1878 * darwin-nat.c (darwin_resume): Fix a compiler warning when
1879 building on x86_64-darwin.
1881 2009-03-16 Tristan Gingold <gingold@adacore.com>
1883 * configure.tgt: Add handling for x86_64-darwin.
1885 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1887 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
1889 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1891 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
1892 Use the ops parameter to get to the target beneath, rather than
1893 using the current_target global. Using the current_target global
1894 was an unintended accident.
1896 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1898 Fix an error happening while loading symbols from a core file
1901 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
1902 to detect whether we're debugging a core file or not.
1904 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1906 Modernize the aix-thread later by getting rid of the base_target
1907 global. This brings back to life the AIX port which was otherwise
1908 crashing all the time.
1910 * aix-thread.c (base_target): Delete.
1911 (pd_enable): Do not set base_target.
1912 (aix_thread_attach): Use find_target_beneath instead of base_target.
1913 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
1914 (aix_thread_fetch_registers, aix_thread_store_registers),
1915 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
1916 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
1917 (aix_thread_kill): Delete. Does not seem necessary.
1918 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
1920 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1922 * stack.c (return_command <retval_exp>): New variables retval_expr
1923 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
1924 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
1925 if RETURN_TYPE is NULL.
1927 2009-03-14 Pedro Alves <pedro@codesourcery.com>
1929 * remote.c (PACKET_qAttached): New.
1930 (remote_query_attached): New.
1931 (remote_add_inferior): Add new `attached' argument. Handle it.
1932 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
1933 -1 to remote_add_inferior in new parameter.
1934 (extended_remote_attach_1): Adjust to pass 1 to
1935 remote_add_inferior in the new parameter.
1936 (extended_remote_create_inferior_1): Adjust to pass 0 to
1937 remote_add_inferior in the new parameter.
1938 (_initialize_remote): Add "set/show remote query-attached-packet"
1941 2009-03-13 Tom Tromey <tromey@redhat.com>
1943 * symtab.c (lookup_symbol_in_language): Use a cleanup.
1945 2009-03-13 Doug Evans <dje@google.com>
1947 * exceptions.h: Clean up some comments on catch_exceptions usage.
1948 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
1951 2009-02-17 Joel Brobecker <brobecker@adacore.com>
1953 The following patch helps getting rid of a warning inside solib-som.c.
1955 * source.c (source_full_path_of): Constify parameter filename.
1956 * defs.h (source_full_path_of): Update declaration accordingly.
1958 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1960 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
1961 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
1962 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
1964 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1966 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
1967 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
1969 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1971 * ada-tasks.c (ada_task_is_alive): Move up and make static.
1972 * ada-lang.h (ada_task_is_alive): Remove declaration.
1974 2009-03-12 Jerome Guitton <guitton@adacore.com>
1976 * ada-lang.c (ada_delta): Change the type of numerators and
1977 denominators to DOUBLEST, as they may not fit into a long.
1978 (scaling_factor): Ditto.
1980 2009-03-12 Jerome Guitton <guitton@adacore.com>
1982 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
1984 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1986 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
1987 types, if we are unable to determine the actual symbol type
1988 from its tag, then use the static approximation instead.
1990 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1992 Fix crash printing packed record with packed array.
1994 * ada-lang.c (ada_modulus_from_name): New function.
1995 (ada_modulus): In the case where the type length is bigger than
1996 the size of the type used to hold the bounds, try determining
1997 the modulus from the type name.
1998 (ada_value_primitive_packed_val): Fix bug in the computation of
1999 ntarg causing an out-of-buffer invalid access.
2001 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2003 Fix segfault when printing short_integer'last.
2005 * ada-lang.c (ada_find_any_type): Search in the primitive types
2006 if a symbol could not be found.
2008 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2010 * ada-tasks.c (task_states,long_task_states): Add new states
2011 Activating and Acceptor_Delay_Sleep. Update the description
2012 of state Acceptor_Sleep.
2014 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
2016 Fix a build failure on Darwin following some changes in
2017 the profile of some target_ops methods.
2019 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
2021 (darwin_stop_inferior, darwin_detach): Likewise.
2023 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
2025 Include token in ^running notification for CLI commands.
2027 * mi/mi-main.c (mi_execute_command): Set current_token here.
2028 (mi_cmd_execute): Do not set current_token here.
2030 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
2034 * mi/mi-main.c (mi_print_timing_maybe): New.
2035 (captured_mi_execute_command): Simplify. Output timings to
2037 (mi_execute_async_cli_command): Do not print timings.
2038 * mi/mi-main.h (mi_print_timing_maybe): Declare.
2039 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
2041 2009-03-12 Jerome Guitton <guitton@adacore.com>
2043 * xcoffread.c (process_linenos): Check if the line in the
2044 include table refers to the main source file and, if so,
2045 add them to the main subfile.
2047 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2049 Fix a build failure on AIX introduced after a change in the profile
2050 of some of the "methods" in the target_ops structure.
2051 * aix-thread.c: Add missing target_ops parameter throughout.
2053 Implement Ada task switching on AIX.
2054 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
2055 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
2057 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
2059 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
2060 value_mark and value_free_to_mark.
2061 * objfiles.c (free_objfile): Call objfile_free_data before
2064 2009-03-10 Hui Zhu <teawater@gmail.com>
2066 * disasm.c (gdb_disassembly): Remove unused argument
2068 * disasm.h (gdb_disassembly): Ditto.
2069 * cli/cli-cmds.c (print_disassembly): Ditto.
2070 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
2072 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
2074 * solib.c (solib_contains_address_p): New function.
2075 (solib_name_from_address): Use it.
2076 * printcmd.c (display_uses_solib_p): Use it.
2077 * solib.h (solib_contains_address_p): Declare it.
2079 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2081 * varobj.c (free_variable): Call value_free.
2083 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2086 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
2087 Move the variable `macinfo_type' out of the loop. Create a new
2088 processing pass before the current one to pre-create `current_file'.
2089 New complaint on misplaced zero/non-zero definitions/includes.
2090 Skip first DW_MACINFO_start_file with `at_commandline' set.
2092 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
2094 * solib.c (reload_shared_libraries): Give
2095 inferior a chance to reset solib breakpoint.
2098 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
2100 * windows-nat.c (dr): Redefine to use largest possible integer which
2102 (cygwin_set_dr): Avoid coercion.
2104 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
2106 * windows-nat.c (windows_create_inferior): Implement --tty handling on
2109 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
2111 Rename solib_address to solib_name_from_address.
2112 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
2113 (disable_breakpoints_in_unloaded_shlib): Update.
2114 * printcmd.c (display_uses_solib_p): Likewise.
2115 * stack.c (print_frame): Likewise.
2119 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
2121 * printcmd.c (do_one_display): Reparse exp_string.
2122 (display_uses_solib_p): New function.
2123 (clear_dangling_display_expressions): New function.
2124 (_initialize_printcmd): Add observer.
2125 * solib.c (no_shared_libraries): Swap order of calls to
2126 clear_solib and objfile_purge_solibs.
2128 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2130 Implement the target-specific part of Ada tasking support
2133 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
2134 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
2136 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2138 Get rid of the global "base_target" and use "find_target_beneath"
2139 to find the underlying target.
2140 * dec-thread.c (base_target): Delete.
2141 (enable_dec_thread): Remove assignement to base_target.
2142 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
2143 (dec_thread_fetch_registers, dec_thread_store_registers)
2144 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
2145 Update the function profile if necessary.
2146 Use find_target_beneath to call the same method but from
2147 the underlying target, removing the need for "base_target".
2149 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
2150 Fix a copy/paste error in a few debug traces...
2152 * solib-osf.c (init_so): Use a simpler method for computing
2153 the size of lm_info structure. This also gets rid of warning
2154 emitted by the compiler.
2156 2009-03-05 Pedro Alves <pedro@codesourcery.com>
2158 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
2159 duplicates of permanent breakpoints.
2161 2009-03-04 Pedro Alves <pedro@codesourcery.com>
2163 * inferior.h (notice_new_inferior): Declare.
2164 * infcmd.c (notice_new_inferior): New.
2165 * remote.c (remote_add_inferior, remote_add_thread): New.
2166 (notice_new_inferiors): Rename to...
2167 (remote_notice_new_inferior): ... this. Add RUNNING argument.
2168 Use remote_add_thread instead of add_thread, passing it the
2169 RUNNING argument. Add an inferior with remote_add_inferior. If
2170 we just learned about an inferior, call notice_new_inferior.
2171 (record_currthread): Adjust.
2172 (remote_threads_info): Adjust to use remote_notice_new_inferior.
2173 (remote_start_remote, extended_remote_attach_1): Use
2174 remote_add_inferior.
2175 (process_stop_reply): Adjust. Call remote_notice_new_inferior
2176 after handling expedited registers and watchpoint state.
2177 (extended_remote_create_inferior_1): Use remote_add_inferior.
2179 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
2181 * infcmd.c (registers_info): Remove register number case.
2183 2009-03-03 Pedro Alves <pedro@codesourcery.com>
2185 * top.c (quit_target): Check for target_has_execution before
2186 killing or detaching from inferiors.
2188 2009-03-02 Joel Brobecker <brobecker@adacore.com>
2190 Remove some unused routines.
2192 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
2194 * ada-lang.c (ada_task_list_iterator_ftype)
2195 (iterate_over_live_ada_tasks): Delete.
2196 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
2199 2009-03-01 Doug Evans <dje@google.com>
2201 * symtab.c: Remove trailing whitespace throughout the file.
2202 (expand_line_sal): Fix some typos and whitespace.
2204 * Makefile.in (clean): rm -f $(DEPDIR)/*.
2206 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
2207 (init.c): signals/ -> common/.
2208 (signals.o): Update.
2209 * target.h (target_signal_to_string,target_signal_to_string)
2210 (target_signal_from_name,target_signal_to_host_p)
2211 (target_signal_from_host,target_signal_to_host): Move to ...
2212 * common/gdb_signals.h: ... here. New file.
2213 * common/signals.c: Moved here from signals/signals.c.
2214 #include gdb_signals.h, remove #include of target.h in gdb case.
2215 (target_signal_from_command,default_target_signal_to_host)
2216 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
2218 Include thread ID in target_wait debugging output.
2219 * infrun.c (print_target_wait_results): New function.
2220 (wait_for_inferior,fetch_inferior_event): Call it.
2222 2009-02-27 Pedro Alves <pedro@codesourcery.com>
2224 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
2225 with a ptid_t field.
2226 * linux-thread-db.c (thread_get_info_callback): Build the ptid
2227 using the pid stored in proc_handle.ptid.
2228 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
2229 (check_for_thread_db, thread_db_detach, check_event)
2230 (thread_db_mourn_inferior, find_new_threads_callback)
2231 (thread_db_find_new_threads_1): Adjust.
2232 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
2233 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
2235 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
2237 * valprint.c (read_string): Rework clean-up logic. Use
2238 free_current_contents to clean-up buffer.
2240 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
2242 * MAINTAINERS: Update e-mail address.
2244 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
2246 * python/python-utils.c (python_string_to_unicode): Always return
2248 (python_string_to_target_string): Decrement transient python
2250 (python_string_to_host_string): Likewise.
2252 2007-02-26 Pedro Alves <pedro@codesourcery.com>
2254 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
2255 call to super_fetch_registers.
2256 (mips64_linux_store_registers): Pass `ops' to call to
2257 super_store_registers.
2259 2009-02-25 Doug Evans <dje@google.com>
2261 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
2264 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
2265 disabled_shlib_breaks, unused.
2267 * printcmd.c (build_address_symbolic): Fix comment.
2269 2009-02-25 Hui Zhu <teawater@gmail.com>
2271 * cli/cli-script.c (define_command): Add _() to query.
2272 * gnu-nat.c (inf_validate_task_sc): Ditto.
2273 * infcmd.c (kill_if_already_running): Ditto.
2274 (jump_command): Ditto.
2275 (attach_command): Ditto.
2276 * inflow.c (kill_command): Ditto.
2277 * infrun.c (handle_command): Ditto.
2278 * maint.c (maintenance_dump_me): Ditto.
2279 * memattr.c (mem_delete_command): Ditto.
2280 * monitor.c (monitor_interrupt_query): Ditto.
2281 * nto-procfs.c (interrupt_query): Ditto.
2282 * printcmd.c (undisplay_command): Ditto.
2283 * remote-mips.c (mips_kill): Ditto.
2284 * remote.c (interrupt_query): Ditto.
2285 * solib-irix.c (irix_open_symbol_file_object): Ditto.
2286 * solib-osf.c (osf_open_symbol_file_object): Ditto.
2287 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
2288 * solib-som.c (som_open_symbol_file_object): Ditto.
2289 * solib-svr4.c (open_symbol_file_object): Ditto.
2290 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
2291 * target.c (kill_or_be_killed): Ditto.
2292 * tracepoint.c (delete_trace_command): Ditto.
2293 * top.c (quit_confirm): Add _() to s that will be used
2296 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
2298 Fix windows-nat.c compilation failure.
2300 * windows-nat.c (windows_thread_alive): Fix forward declaration.
2301 (get_windows_debug_event): Add ops parameter to call to windows_resume.
2303 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2305 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
2307 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
2309 * symtab.c (find_line_symtab): Initialize exact to avoid
2312 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2314 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
2315 `ops' to recursive call.
2317 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2319 * corelow.c (get_core_registers): Adjust.
2320 (core_file_thread_alive): Rename to...
2321 (core_thread_alive): ... this.
2322 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
2323 (init_core_ops): Adjust.
2324 (coreops_suppress_target): Delete.
2325 (_initialize_corelow): Unconditionally add core_ops.
2326 * procfs.c: Include "inf-child.h".
2327 (procfs_ops): Delete.
2328 (init_procfs_ops): Delete. Reimplement as...
2329 (procfs_target): ... this, inheriting from inf-child.
2330 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
2331 (procfs_prepare_to_store): Delete.
2332 (procfs_store_registers, procfs_resume): Adjust.
2333 (procfs_open): Delete.
2334 (procfs_suppress_run): Delete.
2335 (procfs_can_run): Delete.
2336 (procfs_mourn_inferior): Adjust.
2337 (procfs_init_inferior): Add target_ops parameter. Adjust.
2338 (procfs_create_inferior): Don't pass procfs_init_inferior to
2339 fork_inferior. Instead call it after fork_inferior returns.
2340 (procfs_find_new_threads): Adjust.
2341 (_initialize_procfs): Adjust to use procfs_target instead of
2343 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
2344 (lwp_to_thread): Use target_thread_alive.
2345 (sol_thread_open): Delete.
2346 (sol_thread_attach): Delete.
2347 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
2348 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
2349 to use find_target_beneath.
2350 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
2351 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
2352 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
2353 (check_for_thread_db): New.
2354 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
2355 (sol_thread_new_objfile): Call check_for_thread_db.
2356 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
2357 (sol_thread_can_run): Delete.
2358 (sol_thread_alive): Adjust to use find_target_beneath.
2359 (sol_thread_stop): Delete.
2360 (rw_common): Use target_write_memory or target_read_memory.
2361 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
2362 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
2363 (solaris_pid_to_str): Remove check for libthread_db initialization
2365 (sol_find_new_threads): Remove check for libthread_db
2366 initialization failing, or for an invalid inferior_ptid. Adjust
2367 to use find_target_beneath.
2368 (sol_core_open, sol_core_close, sol_core_detach,
2369 sol_core_files_info, sol_find_memory_regions,
2370 sol_make_note_section, ignore): Delete.
2371 (init_sol_thread_ops): Make it a thread_stratum target. Remove
2372 unneeded callback settings.
2373 (init_sol_core_ops): Delete.
2374 (_initialize_sol_thread): No longer call init_sol_core_ops, set
2375 procfs_suppress_run, or hack with core_ops.
2377 * target.h (struct target_ops): Add a target_ops * parameter to
2378 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
2379 and to_find_new_threads.
2380 (target_fetch_registers, target_store_registers)
2381 (target_thread_alive, target_find_new_threads): Redeclare as
2384 * target.c (update_current_target): Do not inherit or de_fault
2385 to_resume, to_fetch_registers, to_store_registers,
2386 to_thread_alive, to_find_new_threads.
2387 (target_resume): Adjust.
2388 (target_thread_alive, target_find_new_threads): New.
2389 (debug_to_resume, debug_to_fetch_registers): Delete.
2390 (target_fetch_registers): New.
2391 (debug_to_store_registers): Delete.
2392 (target_store_registers): New.
2393 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
2394 (setup_target_debug): Adjust.
2396 * gdbcore.h (core_ops): Delete declaration.
2398 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
2399 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
2400 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
2401 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
2402 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
2403 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
2404 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
2405 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
2406 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
2407 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
2408 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
2409 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
2410 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
2411 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
2413 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
2414 * gdbarch.h, gdbarch.c: Regenerate.
2416 * sol2-tdep.c: Include "inferior.h".
2417 (sol2_core_pid_to_str): New.
2418 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
2420 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2421 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2422 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2423 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2425 2009-02-22 Doug Evans <dje@google.com>
2427 * exec.c (exec_file_attach): Fix comment.
2429 2009-02-22 Pedro Alves <pedro@codesourcery.com>
2431 Silence a few -Wmissing-prototypes warnings.
2434 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
2436 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
2437 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
2438 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
2439 (_initialize_amd64nbsd_tdep): ... this.
2440 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
2441 (_initialize_arm_linux_tdep): Declare.
2442 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
2443 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
2444 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
2445 * avr-tdep.c (avr_return_value): Make it static.
2446 (avr_frame_unwind_cache): Ditto.
2447 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
2448 (bsd_uthread_solib_loaded): Ditto.
2449 (bsd_uthread_solib_unloaded): Ditto.
2450 (bsd_uthread_target): Ditto.
2451 (_initialize_bsd_uthread): Declare.
2452 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
2453 (cris_frame_unwind_cache): Ditto.
2454 * frv-tdep.c (frv_return_value): Ditto.
2455 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
2456 (h8300h_use_struct_convention): Ditto.
2457 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
2459 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
2461 * hppabsd-tdep.c: Include hppabsd-tdep.h.
2462 (hppabsd_find_global_pointer): Make it static.
2463 * hppabsd-tdep.h: New.
2464 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
2465 (hppabsd_init_abi): Remove declaration.
2466 (_initialize_hppabsd_tdep): Remove declaration.
2467 (_initialize_hppanbsd_tdep): Declare.
2468 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
2469 (hppabsd_init_abi): Delete declaration.
2470 (hppaobsd_init_abi): Make it static.
2471 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
2472 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
2473 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
2474 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
2475 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
2476 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
2477 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
2478 (_initialize_m32c_tdep): Declare.
2479 * m32r-rom.c (_initialize_m32r_rom): Declare.
2480 * m32r-tdep.c (m32r_skip_prologue): Make it static.
2481 (m32r_return_value): Ditto.
2482 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
2483 (m68hc11_return_value): Ditto.
2484 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
2485 * m88k-tdep.c (m88k_frame_cache): Make it static.
2486 * mep-tdep.c (mep_gdb_print_insn): Ditto.
2487 (mep_return_value): Ditto.
2488 (_initialize_mep_tdep): Declare.
2489 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
2490 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
2491 (mips_linux_syscall_next_pc): Ditto.
2492 (_initialize_mips_linux_tdep): Declare.
2493 * mips-tdep.c (mips_single_step_through_delay): Make it static.
2494 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
2495 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
2496 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
2497 * mt-tdep.c (_initialize_mt_tdep): Declare.
2498 * nbsd-tdep.c: Include nbsd-tdep.h.
2499 * nto-tdep.c (find_load_phdr): Make it static.
2500 (_initialize_nto_tdep): Declare.
2501 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
2503 (_initialize_ppc_linux_tdep): Declare.
2504 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
2505 (m32r_insert_watchpoint, m32r_remove_watchpoint)
2506 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
2508 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
2509 * rs6000-nat.c: Include xcoffread.h.
2510 (find_toc_address): Don't extern declare get_toc_offset. Adjust
2511 to call xcoff_get_to_offset.
2512 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
2513 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
2514 (rs6000_skip_trampoline_code): Make static.
2515 * s390-tdep.c (s390_regset_from_core_section): Ditto.
2516 * sh-tdep.c (sh_register_reggroup_p): Ditto.
2517 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
2518 (_initialize_shnbsd_tdep): Declare.
2519 * solib-frv.c (displacement_from_map): Make static.
2520 (_initialize_frv_solib): Declare.
2521 * solib-irix.c (fetch_lm_info): Make static.
2522 (_initialize_irix_solib): Declare.
2523 * solib-som.c: Include solib-som.h.
2524 (som_solib_select): Line break.
2525 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
2526 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
2527 (_initialize_sparcnbsd_tdep): ... this.
2528 * spu-tdep.c (spu_software_single_step): Make it static.
2529 (_initialize_spu_tdep): Declare.
2530 * vax-tdep.c (vax_frame_cache): Make it static.
2531 * xcoffread.c: Include xcoffread.h.
2532 (get_toc_offset): Rename to ...
2533 (xcoff_get_toc_offset): ... this.
2534 (_initialize_xcoffread): Declare.
2536 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
2537 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
2539 (_initialize_xtensa_tdep): Declare.
2541 2008-02-21 Pedro Alves <pedro@codesorcery.com>
2543 Silence a few -Wmissing-prototypes warnings.
2546 * amd64-nat.c: Include "amd64-nat.h".
2547 * fork-child.c (_initialize_fork_child): Ditto.
2548 * gcore.c (_initialize_gcore): Ditto.
2549 * inf-ptrace.c: Include "inf-ptrace.h".
2550 (inf_ptrace_store_registers): Make it static.
2551 * linux-nat.c (linux_nat_terminal_ours): Make it static.
2552 (_initialize_linux_nat): Declare before definition.
2553 * linux-tdep.c: Include "linux-tdep.h".
2554 * linux-thread-db.c (_initialize_thread_db): Declare before
2556 * proc-service.c (_initialize_proc_service): Ditto.
2557 * remote.c (remote_send_printf): Make it static.
2558 * solib.c: Include "solib.h".
2559 * symfile-mem.c (_initialize_symfile_mem): Declare before
2561 * ada-lang.c (ada_la_decode, ada_match_name)
2562 (ada_suppress_symbol_printing, ada_is_array_type)
2563 (ada_value_ptr_subscript, ada_array_length)
2564 (ada_to_static_fixed_value): Make them static.
2565 (_initialize_ada_language): Declare before definition.
2566 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
2567 (ada_task_list_changed, ada_new_objfile_observer): Make them
2569 (_initialize_tasks): Declare before definition.
2570 * addrmap.c (_initialize_addrmap): Declare before definition.
2571 * auxv.c (default_auxv_parse): Make it static.
2572 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
2574 * breakpoint.c (remove_sal): Add line break.
2575 (expand_line_sal_maybe): Make it static.
2576 * cp-name-parser.y: Include "cp-support.h".
2577 * cp-valprint.c (cp_find_class_member): Make it static.
2578 * eval.c (value_f90_subarray): Ditto.
2579 * exceptions.c (print_any_exception): Ditto.
2580 * findcmd.c (_initialize_mem_search): Declare before definition.
2581 * frame.c (frame_observer_target_changed): Make it static.
2582 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
2583 * inf-child.c: Include "inf-child.h".
2584 * inferior.h (valid_inferior_id): Rename to ...
2585 (valid_gdb_inferior_id): ... this.
2586 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
2588 * jv-lang.c (java_language_arch_info): Make it static.
2589 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
2590 * osdata.c (info_osdata_command): Make it static.
2591 * regcache.c (regcache_observer_target_changed): Make it static.
2592 * reverse.c (_initialize_reverse): Declare before definition.
2593 * stabsread.c (cleanup_undefined_types_noname)
2594 (cleanup_undefined_types_1): Make them static.
2595 * symfile.c (place_section): Make it static.
2596 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
2597 * target-descriptions.c (_initialize_target_descriptions): Declare
2599 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
2600 (find_default_is_async_p, find_default_supports_non_stop): Make
2602 (target_supports_non_stop): Add prototype.
2603 (dummy_pid_to_str): Make it static.
2604 * utils.c (_initialize_utils): Declare before definition.
2605 * ada-exp.y (_initialize_ada_exp): Declare before definition.
2606 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
2607 * target.h (struct target_ops): Add a prototype to the
2608 to_can_execute_reverse callback.
2609 * macroscope.c (_initialize_macroscope): Declare before definition.
2610 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
2611 * python/python.c (_initialize_python): Declare before definition.
2612 * tui/tui-command.c: Include "tui/tui-command.h".
2613 * tui/tui-data.c (init_content_element, init_win_info): Make them
2615 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
2616 * tui/tui-interp.c (_initialize_tui_interp): Declare before
2618 * tui/tui-layout.c: Include "tui/tui-layout.h".
2619 (_initialize_tui_layout): Declare before definition.
2620 * tui/tui-regs.c: Include "tui/tui-regs.h".
2621 (tui_display_reg_element_at_line): Make it static.
2622 (_initialize_tui_regs): Declare before definition.
2623 * tui/tui-stack.c (_initialize_tui_stack): Declare before
2625 * tui/tui-win.c: Include "tui/tui-win.h".
2626 (_initialize_tui_win): Declare before definition.
2627 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
2628 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
2629 (tui_get_cmd_list): Add a prototype.
2630 * tui/tui-windata.c: Include tui-windata.h.
2631 * tui/tui-wingeneral.c (box_win): Make it static.
2632 * cli/cli-logging.c (show_logging_command): Make it static.
2633 (_initialize_cli_logging): Declare before definition.
2634 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
2637 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
2639 Extend use of i386_use_watchpoints to all i386 native files
2640 using hardware watchpoints.
2641 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
2642 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
2643 * windows-nat.c (init_windows_ops): Ditto.
2644 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
2645 * config/i386/nm-cygwin64.h: Ditto.
2646 * config/i386/nm-fbsd.h: Ditto.
2647 * config/i386/nm-go32.h: Ditto.
2649 2009-02-19 Joel Brobecker <brobecker@adacore.com>
2651 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
2653 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
2655 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
2656 (mi_interpreter_init): Register the above.
2657 * solib.c (clear_solib): Notify solib unload.
2658 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
2659 disable breakpoints on a.out targets.
2661 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
2663 * observer.c (observer_test_first_notification_function)
2664 (observer_test_second_notification_function)
2665 (observer_test_third_notification_function): Adjust prototype.
2667 2009-02-17 Pedro Alves <pedro@codesourcery.com>
2669 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
2670 (ALL_TARGET_OBS): Add dicos-tdep.o.
2671 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
2672 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
2674 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
2676 * dicos-tdep.h, dicos-tdep.c: New.
2677 * amd64-dicos-tdep.c: New.
2678 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
2679 inferior.h. Include dicos-tdep.h.
2680 (i386_dicos_init_abi): Call dicos_init_abi.
2681 (i386_dicos_bfd_has_symbol_p): Delete.
2682 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
2684 * NEWS: Mention x86-64 DICOS target support.
2686 2009-02-16 Doug Evans <dje@google.com>
2688 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
2689 All callers updated.
2690 (amd64_get_insn_details): Handle more 3-byte opcode insns.
2691 (amd64_breakpoint_p): Delete.
2692 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
2693 don't back up pc to the start of the int3.
2694 * i386-tdep.c: #include opcode/i386.h.
2695 (i386_skip_prefixes): New function.
2696 (i386_absolute_jmp_p): Constify argument.
2697 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
2698 (i386_breakpoint_p): Delete.
2699 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
2700 When fixing up after stepping an int3, don't back up pc to the start
2703 2009-02-16 Pedro Alves <pedro@codesourcery.com>
2705 * corelow.c (core_close): Don't hardcode the core's pid.
2706 (core_open): Find core threads before calling
2707 post_create_inferior.
2708 (add_to_thread_list, get_core_register_section): Take into account
2709 systems where the regset section names encode the pid of the
2712 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
2713 * gdbarch.h, gdbarch.c: Regenerate.
2715 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2716 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2717 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2718 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2720 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
2722 Include frame information for *stopped due to CLI commands.
2724 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
2725 * infcmd.c (finish_command_continuation): Pass '1' for
2726 'print_frame' parameter to the observer.
2727 * infrun.c (normal_stop): Don't print mi-specific information
2728 here. Pass 'stop_print_frame' to the 'print_frame' parameter
2730 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
2731 If we need to print frame, and current uiout is not the MI one,
2734 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
2736 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
2737 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
2739 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2742 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
2743 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
2745 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
2747 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
2748 for DW_ATE_signed_char and DW_ATE_unsigned_char
2749 for pascal language.
2751 2009-02-11 Jim Meyering <meyering@redhat.com>
2752 Jan Kratochvil <jan.kratochvil@redhat.com>
2754 Avoid NULL dereference.
2755 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
2756 New variable func_type.
2758 2009-02-11 Pedro Alves <pedro@codesourcery.com>
2760 * gdbarch.c: Regenerate.
2762 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
2764 * p-lang.c (is_pascal_string_type): Fix comment.
2765 Determine exact size of char elements for GPC
2767 (pascal_printstr): Handle char width of 2 or 4.
2768 * p-valprint.c (pascal_val_print): Handle char
2771 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
2773 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
2774 inside the loop. Only call addrmap_set_empty if the compilation unit
2775 had DW_AT_high_pc and DW_AT_low_pc. Update call to
2776 scan_partial_symbols.
2777 (scan_partial_symbols): Take NEED_PC argument and pass it along with
2779 (add_partial_namespace): Take NEED_PC argument and pass it through.
2780 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
2783 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2785 * NEWS: Mention inspecting extra signal information, $_siginfo,
2786 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
2788 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2790 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
2793 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2795 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
2796 (compat_timer_t, compat_clock_t, struct compat_timeval)
2797 (compat_sigval_t, compat_siginfo_t): New types.
2798 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
2799 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
2800 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
2801 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
2802 (amd64_linux_siginfo_fixup): New.
2803 * linux-nat.c (linux_nat_siginfo_fixup): New.
2804 (siginfo_fixup): New.
2805 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
2806 siginfo layout expected by ptrace and the siginfo layout of the
2808 (linux_nat_set_siginfo_fixup): New.
2809 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
2811 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2813 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
2814 * infrun.c (siginfo_value_read, siginfo_value_write): New.
2815 (siginfo_value_funcs): New.
2816 (siginfo_make_value): New.
2817 (_initialize_infrun): Create the $_siginfo convenience variable.
2818 * gdbtypes.h (append_composite_type_field_aligned): Declare.
2819 * gdbtypes.c (append_composite_type_field): Rename to...
2820 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
2821 argument. Handle it.
2822 (append_composite_type_field): Rewrite on top of
2823 append_composite_type_field_aligned.
2824 * value.h (internalvar_make_value): New typedef.
2825 (struct internalvar) <make_value>: New field.
2826 (create_internalvar_type_lazy): Declare.
2827 * value.c (create_internalvar): Clear make_value.
2828 (create_internalvar_type_lazy): New.
2829 (value_of_internalvar): If make_value is set use it.
2830 (preserve_values): Skip internal variables that don't have a
2832 * gdbarch.sh (get_siginfo_type): New.
2833 * gdbarch.h, gdbarch.c: Regenerate.
2835 * linux-tdep.h, linux-tdep.c: New.
2836 * amd64-linux-tdep.c: Include "linux-tdep.h".
2837 (amd64_linux_init_abi): Register linux_get_siginfo_type and
2838 linux_get_siginfo_mapper.
2839 * i386-linux-tdep.c: Include "linux-tdep.h".
2840 (i386_linux_init_abi): Register linux_get_siginfo_type and
2841 linux_get_siginfo_mapper.
2842 * arm-linux-tdep.c: Include "linux-tdep.h".
2843 (i386_linux_init_abi): Register linux_get_siginfo_type and
2844 linux_get_siginfo_mapper.
2846 * linux-nat.c (linux_xfer_siginfo): New.
2847 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2848 * remote.c (PACKET_qXfer_siginfo_read)
2849 (PACKET_qXfer_siginfo_write): New.
2850 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
2851 "qXfer:siginfo:write" features.
2852 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2853 (_initialize_remote): Add "set/show remote read-siginfo-object"
2854 and "set/show remote write-siginfo-object" commands.
2856 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
2857 (HFILES_NO_SRCDIR): Add linux-tdep.h.
2858 (ALLDEPFILES): Add linux-tdep.c.
2860 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
2861 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
2864 2009-02-06 Jim Blandy <jimb@codesourcery.com>
2865 Daniel Jacobowitz <dan@codesourcery.com>
2866 Vladimir Prus <vladimir@codesourcery.com>
2867 Pedro Alves <pedro@codesourcery.com>
2869 * defs.h (enum lval_type): New value: lval_computed.
2870 * value.h (struct lval_funcs): New type.
2871 (allocate_computed_value, value_computed_funcs)
2872 (value_computed_closure): New declarations.
2873 * value.c (struct value): Add a structure to the location union
2874 for computed lvalues, containing 'funcs' and 'closure' members.
2875 (allocate_computed_value, value_computed_funcs)
2876 (value_computed_closure): New functions.
2877 (value_free): For computed lvalues, call the closure's
2878 'free_closure' function before freeing the value itself.
2879 (value_copy): If we're copying an lval_computed value, call the
2880 closure's 'copy_closure' function.
2881 (set_value_component_location): If the original value is a
2882 computed lvalue, then call the closure's 'copy_closure' function.
2883 (value_of_internalvar): If an internal variable's value is a
2884 computed lvalue, make retrieving its value produce an equivalent
2886 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
2887 their read function.
2888 (value_assign): Assign to computed lvalues by calling their write
2891 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2893 * linux-nat.c (linux_nat_wait): Adjust.
2894 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
2895 * linux-nat.h (thread_db_init): Delete declaration.
2896 * linux-thread-db.c (target_beneath): Delete.
2897 (thread_db_init): Delete.
2898 (thread_db_detach): Use find_target_beneath.
2899 (thread_db_wait): Adjust interface. Use find_target_beneath.
2900 (thread_db_mourn_inferior): Use find_target_beneath.
2901 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
2902 (thread_db_async_mask): Delete.
2903 (thread_db_pid_to_str): Adjust interface. Use
2904 find_target_beneath.
2905 (thread_db_get_thread_local_address): Adjust interface. Use
2906 find_target_beneath.
2907 (init_thread_db_ops): Delete references to delete functions.
2908 * target.c (update_current_target): Don't inherit or default
2909 to_wait. Don't inherit to_pid_to_str and
2910 to_get_thread_local_address.
2911 (target_translate_tls_address): Look for a pushed target that
2912 implements to_get_thread_local_address, and use it instead of
2913 checking for target_get_thread_local_address_p.
2914 (target_wait, target_pid_to_str): Reimplement as functions.
2915 (dummy_pid_to_str): New.
2916 (init_dummy_target): Register it.
2917 (debug_to_wait): Delete.
2918 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
2919 to_get_thread_local_address accept a pointer to struct target_ops.
2920 (target_wait): Delete macro, and declare as function.
2921 (target_pid_to_str): Likewise.
2922 (target_get_thread_local_address)
2923 (target_get_thread_local_address_p): Delete.
2924 (noprocess): Add NORETURN and ATTR_NORETURN tags.
2925 * inf-ptrace.c (inf_ptrace_wait): Adjust.
2926 (inf_ptrace_pid_to_str): New.
2927 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
2928 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
2929 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
2930 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
2932 * corelow.c (core_pid_to_str): Adjust.
2933 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
2934 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
2935 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
2936 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
2937 * hpux-thread.c (hpux_thread_wait): Adjust.
2938 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
2939 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
2940 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
2941 * procfs.c (procfs_pid_to_str): Adjust.
2942 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
2943 * remote-mips.c (mips_wait): Adjust.
2944 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
2945 * remote.c (remote_wait, remote_pid_to_str)
2946 (remote_get_thread_local_address): Adjust.
2947 * rs6000-nat.c (rs6000_wait): Adjust.
2948 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
2949 (sol_thread_wait, solaris_pid_to_str): Adjust.
2950 * spu-linux-nat.c (spu_child_wait): Adjust.
2951 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2953 2009-02-06 Tom Tromey <tromey@redhat.com>
2955 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
2956 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
2957 (python-cmd.o): New target.
2958 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
2959 completer prototype.
2960 (add_cmd): Initialize destroyer member of cmd_list_element. Use
2961 make_symbol_completion_list_fn as completer.
2962 (delete_cmd): Call destroyer if one is set.
2963 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
2964 completer member. Add destroyer member.
2965 (set_cmd_completer): Add self parameter to
2966 completer prototype.
2967 * command.h (set_cmd_completer): Add cmd parameter to
2968 completer prototype.
2969 * completer.c (noop_completer, filename_completer,
2970 location_completer, expression_completer, command_completer): Adapt
2971 to new completer prototype.
2972 (complete_line_internal): Pass new parameter to completer function.
2973 * completer.h (noop_completer, filename_completer,
2974 location_completer, expression_completer, command_completer): Adapt
2975 prototypes to new completer prototype.
2976 * interps.c (interpreter_completer): Adapt to new completer
2978 * python/python-cmd.c: New file.
2979 * python/python-internal.h (gdbpy_initialize_commands): Add
2981 (gdbpy_doc_cst): Add forward declaration.
2982 * python/python.c (gdbpy_doc_cst): Declare.
2983 (_initialize_python): Call gdbpy_initialize_commands. Initialize
2985 * symtab.c (make_symbol_completion_list_fn): New function.
2986 * symtab.h (make_symbol_completion_list_fn): Add prototype.
2988 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2990 * target.c (target_get_osdata): Check for equal or higher than
2991 process_stratum, not dummy_stratum.
2993 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2995 * remote.c (extended_remote_can_run): Delete.
2996 (init_remote_ops): Don't register it.
2997 * target.c (target_get_osdata): Don't check for target_can_run.
2998 Instead any target that has already been pushed, otherwise
2999 fallback to the default run target.
3001 2009-02-06 Pedro Alves <pedro@codesourcery.com>
3003 * target.c (target_create_inferior, target_detach)
3004 (target_mourn_inferior, target_attach, target_close): Do target
3006 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
3007 (debug_to_mourn_inferior, debug_to_close): Delete.
3008 (setup_target_debug): Adjust.
3010 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3012 * target.h (target_stopped_data_address_p): Delete declaration,
3013 and don't define as macro.
3014 * target.c (target_stopped_data_address_p): Delete.
3016 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
3017 Tom Tromey <tromey@redhat.com>
3019 * python/python-utils.c (target_string_to_unicode): New function.
3020 * python/python-internal.h (target_string_to_unicode): New prototype.
3021 * python/python-value.c (valpy_string): New function.
3022 (value_object_methods): Add `string' entry.
3024 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3026 * target.h (target_tid_to_str): Delete.
3027 * thread.c (print_thread_info, thread_apply_all_command)
3028 (thread_apply_command, thread_command, do_captured_thread_select):
3029 Use target_pid_to_str instead of target_tid_to_str.
3030 * linux-fork.c (delete_fork_command): Likewise.
3032 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3034 * frame.c (has_stack_frames): Make public.
3035 (get_prev_frame): Don't allow a NULL this_frame anymore.
3036 * frame.h (has_stack_frames): Declare.
3037 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
3038 to get_prev_frame, instead start at get_current_frame.
3039 (varobj_create): Check has_stack_frames before getting any frame;
3040 eliminate one usage of deprecated_safe_get_selected_frame.
3042 2009-02-05 Tom Tromey <tromey@redhat.com>
3043 Thiago Jung Bauermann <bauerman@br.ibm.com>
3045 * python/python.c (GdbMethods): Move to bottom of file.
3046 (get_parameter, execute_gdb_command, gdbpy_write,
3047 gdbpy_flush): Remove forward declarations.
3048 (eval_python_from_control_command): Fix error checking of function
3049 PyRun_SimpleString. Fix error string.
3050 (python_command): Likewise.
3051 (execute_gdb_command): Added from_tty argument.
3053 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
3055 * language.h (language_dfn): Add la_get_string member.
3056 (LA_GET_STRING): New macro.
3057 (default_get_string): New prototype.
3058 * language.c (default_get_string): New function.
3059 (unknown_language_defn, auto_language_defn, local_language_defn): Use
3060 default_get_string for la_get_string.
3061 * c-lang.c (c_get_string): New function.
3062 (c_language_defn, cplus_language_defn, asm_language_defn): Use
3063 c_get_string for la_get_string.
3064 (minimal_language_defn): Likewise
3065 * ada-lang.c (ada_language_defn): Likewise.
3066 * f-lang.c (f_language_defn): Use default_get_string for
3068 * jv-lang.c (java_language_defn): Likewise.
3069 * m2-lang.c (m2_language_defn): Likewise.
3070 * objc-lang.c (objc_language_defn): Likewise.
3071 * p-lang.c (p_language_defn): Likewise.
3072 * scm-lang.c (scm_language_defn): Likewise.
3073 * typeprint.c (type_to_string): New function.
3074 * value.h (type_to_string): New prototype.
3075 * valprint.c (val_print_string): Factor out code for reading string
3076 from the inferior into its own function. Put 2 spaces after period
3078 (read_string): New function.
3079 * valprint.h (read_string): New prototype.
3081 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
3082 Tom Tromey <tromey@redhat.com>
3084 PR breakpoints/8079:
3085 * breakpoint.c (print_one_breakpoint): Use exp_string field
3086 to display expression of watchpoints.
3087 (mention): Likewise.
3088 (watch_command_1): Remove trailing whitespace from expression.
3089 * printcmd.c (struct display) <exp_string>: New field.
3090 (display_command): Set exp_string.
3091 (free_display): Free exp_string.
3092 (clear_displays): Use free_display.
3093 (do_one_display): Print exp_string.
3094 (display_info): Likewise.
3096 2009-02-04 Tom Tromey <tromey@redhat.com>
3097 Thiago Jung Bauermann <bauerman@br.ibm.com>
3098 Phil Muldoon <pmuldoon@redhat.com>
3100 * python/python-internal.h (gdbpy_get_value_from_history): Rename
3101 prototype to gdbpy_history.
3102 (gdbpy_is_string): Declare.
3103 (python_string_to_host_string): Declare.
3104 * python/python-utils.c (gdbpy_is_string): New function.
3105 (unicode_to_encoded_string): New function.
3106 (unicode_to_target_string): Use it.
3107 (python_string_to_host_string): New function.
3108 * python/python-value.c (valpy_address): New function.
3109 (convert_value_from_python): Use gdbpy_is_string. Change to throw
3110 Python exception instead of a GDB exception on error. Properly check
3112 (valpy_getitem): Convert field name to host string. Handle array
3113 accesses. Adapt to new behaviour of convert_value_from_python.
3114 (valpy_new): Adapt to new behaviour of convert_value_from_python.
3115 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
3116 VALPY_BITXOR, VALPY_BITOR>: New constants.
3117 (valpy_binop): Update. Adapt to new behaviour of
3118 convert_value_from_python.
3119 (valpy_invert): New function.
3120 (valpy_lsh): Likewise.
3121 (valpy_rsh): Likewise.
3122 (valpy_and): Likewise.
3123 (valpy_or): Likewise.
3124 (valpy_xor): Likewise.
3125 (valpy_richcompare): Call convert_value_from_python instead of doing
3127 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
3128 (gdbpy_get_value_from_history): Rename
3129 function to gdbpy_history.
3130 (gdbpy_initialize_values): Don't set tp_new.
3131 (value_object_type): Add valpy_new.
3132 (value_object_methods): Add `address' entry.
3133 (value_object_as_number): Update for new methods.
3134 * python/python.c (GdbMethods): Rename entry from
3135 `get_value_from_history' to `history'.
3137 2009-02-04 Jerome Guitton <guitton@adacore.com>
3139 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
3140 of type to guard against a crash.
3142 2009-02-04 Jerome Guitton <guitton@adacore.com>
3144 * value.c (value_from_contents_and_address): Always return
3145 a lval_memory value, even if address is null.
3147 2009-02-04 Tristan Gingold <gingold@adacore.com>
3149 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
3150 (amd64_darwin_sigcontext_addr): Ditto.
3151 (darwin_dwarf_signal_frame_p): Ditto.
3152 (i386_darwin_init_abi): Handle signal frames, use the const for
3154 (x86_darwin_init_abi_64): Ditto.
3156 2009-02-04 Tristan Gingold <gingold@adacore.com>
3158 * i386-tdep.c (i386_sigtramp_p): Make it public.
3159 * i386-tdep.h (i386_sigtramp_p): Declare.
3161 2009-02-04 Tristan Gingold <gingold@adacore.com>
3163 * machoread.c (macho_symfile_read): Read minsymtab also from
3165 (macho_symfile_read): Try to read dwarf2 frame info from main
3166 object file, but not from OSO files.
3167 (macho_symfile_offsets): Update section names for latest BFD
3169 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
3170 (x86_darwin_init_abi_64): Ditto.
3171 * solib-darwin.c: New file.
3172 * solib-darwin.h: New file.
3173 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
3175 2009-02-04 Tristan Gingold <gingold@adacore.com>
3177 * solist.h (struct target_so_ops): Comment fallback behavior for
3180 2009-02-03 Tom Tromey <tromey@redhat.com>
3182 * completer.c (add_struct_fields): Check type_name against NULL
3185 2009-02-03 Joel Brobecker <brobecker@adacore.com>
3187 * MAINTAINERS: Update Elena's email address.
3189 2009-02-02 Joel Brobecker <brobecker@adacore.com>
3191 * breakpoint (update_watchpoint): Minor comment adjustment.
3193 2009-02-02 Tom Tromey <tromey@redhat.com>
3196 * completer.c (count_struct_fields): Count method names.
3197 (add_struct_fields): Add matching method names.
3199 2009-02-02 Doug Evans <dje@google.com>
3201 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
3202 doing any further tcl/tk configury. Don't configure gdbtk if
3203 tcl or tk check fails.
3204 * aclocal.m4: Regenerate.
3205 * configure: Regenerate.
3207 2009-02-02 Tom Tromey <tromey@redhat.com>
3210 * valops.c (find_overload_match): Follow typedefs before taking
3211 address of object argument.
3213 2009-02-01 Doug Evans <dje@google.com>
3215 * target.h (target_waitstatus_to_string): Declare.
3216 * target.c (target_waitstatus_to_string): New function. Copied from
3217 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
3218 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
3219 TARGET_WAITKIND_NO_HISTORY.
3220 (debug_to_wait): Call it.
3221 * infrun.c (wait_for_inferior): If debug_infrun, print result of
3223 (fetch_inferior_event): Ditto.
3225 2009-01-30 Tom Tromey <tromey@redhat.com>
3227 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
3229 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3232 * thread.c (do_captured_list_thread_ids): Report the current
3235 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3237 * breakpoint.c (create_breakpoint, create_breakpoints)
3238 (break_command_really, set_breakpoint): New parameter enabled.
3239 (create_breakpoint, break_command_really): Make breakpoint
3240 disabled if so requested.
3241 * breakpoint.h (set_breakpoint): New parameter enabled.
3242 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
3244 2009-01-28 Doug Evans <dje@google.com>
3246 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
3247 (amd64_displaced_step_fixup): Declare.
3248 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
3249 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
3250 and make static global.
3251 (amd64_arch_regmap_len): New static global.
3252 (amd64_arch_reg_to_regnum): New function.
3253 (struct amd64_insn): New struct.
3254 (struct displaced_step_closure): New struct.
3255 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
3256 (rex_prefix_p,skip_prefixes)
3257 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
3258 (amd64_insn_length,amd64_get_unused_input_int_reg)
3259 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
3260 (amd64_displaced_step_copy_insn)
3261 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
3262 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
3263 (amd64_displaced_step_fixup): New functions.
3264 * amd64-linux-tdep.c: #include arch-utils.h.
3265 (amd64_linux_init_abi): Install displaced stepping support.
3267 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
3268 Jerome Guitton <guitton@adacore.com>
3270 * configure, config.in: Regenerated.
3271 * configure.ac: Add --with-system-gdbinit.
3272 * main.c (get_init_files): New.
3273 (captured_main): Use get_init_files. Load system gdbinit before
3275 (print_gdb_help): Print location of init files.
3277 2009-01-28 Pedro Alves <pedro@codesourcery.com>
3279 * corefile.c (generic_search): Delete disabled code.
3280 * gdbcore.h (generic_search): Delete declaration.
3282 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3284 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
3285 parent to the child.
3286 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
3287 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
3288 remove_breakpoints to remove breakpoints from the parent.
3290 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3292 PR backtrace/9458, PR backtrace/8864:
3293 * frame.c (create_new_frame): Update the frame's cached PC before
3294 finding its unwinder. Use frame_id_build to build the new frame's
3296 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
3297 array values from the ``args'' array values.
3299 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3301 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
3302 (create_array_type, create_set_type, init_flags_type)
3303 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
3304 with a call to XZALLOC or XCALLOC, and pairs of calls to
3305 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
3307 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3309 Add "maint set|show internal-error|internal-warning quit|corefile
3310 ask|yes|no" commands.
3313 * utils.c (internal_problem_ask, internal_problem_yes)
3314 (internal_problem_no, internal_problem_modes): New.
3315 (struct internal_problem): Remove FIXME. Make should_quit and
3316 should_dump_core types to char *.
3317 (internal_vproblem, internal_error_problem)
3318 (internal_warning_problem): Adjust.
3319 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
3321 (add_internal_problem_command): New.
3322 (_initialize_utils): New.
3324 2009-01-25 Pedro Alves <pedro@codesourcery.com>
3326 * infcmd.c (program_info): Use paddress instead of casting stop_pc
3329 2009-01-24 Pedro Alves <pedro@codesourcery.com>
3331 * infrun.c (normal_stop): Don't call
3332 deprecated_update_frame_pc_hack.
3333 * frame.c (deprecated_update_frame_pc_hack)
3334 (deprecated_update_frame_base_hack): Delete, and ...
3335 (create_new_frame): ... inline here.
3336 * frame.h (deprecated_update_frame_pc_hack)
3337 (deprecated_update_frame_base_hack): Delete declarations.
3339 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3341 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
3342 * cli/cli-setshow.c (do_setshow_command): Handle it.
3343 * command.h (enum var_types): Add var_zuinteger.
3344 (add_setshow_zuinteger_cmd): Declare.
3346 * valprint.c (_initialize_valprint): Change the set input-radix
3347 and set output-radix commands to zuinteger type.
3349 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3352 * infrun.c (normal_stop): Tag threads as stopped, and run the
3353 hook-stop before printing the stack frame.
3355 2009-01-22 Pedro Alves <pedro@codesourcery.com>
3358 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
3361 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
3363 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
3366 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
3369 * infcmd.c (signal_command): Do not specify a resume PC.
3371 2009-01-19 Doug Evans <dje@google.com>
3373 * dummy-frame.c (dummy_frame): Replace regcache member with
3375 (dummy_frame_push): Replace caller_regcache arg with caller_state.
3376 All callers updated.
3377 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
3378 (dummy_frame_pop): Rewrite. Verify requested frame is in the
3379 dummy frame stack. Restore program state.
3380 (cleanup_dummy_frames): Rewrite.
3381 (dummy_frame_sniffer): Update. Make static.
3382 * dummy-frame.h (regcache,frame_info): Delete forward decls.
3383 (inferior_thread_state): New forward decl.
3384 (dummy_frame_push): Update prototype.
3385 * frame.c (frame_pop): dummy_frame_pop now does all the work for
3387 * infcall.c (breakpoint_auto_delete_contents): Delete.
3388 (get_function_name,run_inferior_call): New fns.
3389 (call_function_by_hand): Simplify by moving some code to
3390 get_function_name, run_inferior_call. Inferior function call wrapped
3391 in TRY_CATCH so there's less need for cleanups and all exits from
3392 proceed are handled similarily. Detect program exit.
3393 Detect program stopping in a different thread.
3394 Make error messages more consistent.
3395 * inferior.h (inferior_thread_state): Declare (opaque type).
3396 (save_inferior_thread_state,restore_inferior_thread_state,
3397 make_cleanup_restore_inferior_thread_state,
3398 discard_inferior_thread_state, get_inferior_thread_state_regcache):
3400 (save_inferior_status): Update prototype.
3401 * infrun.c: (normal_stop): When stopped for the completion of an
3402 inferior function call, verify the expected stack frame kind.
3403 (inferior_thread_state): New struct.
3404 (save_inferior_thread_state,restore_inferior_thread_state,
3405 do_restore_inferior_thread_state_cleanup,
3406 make_cleanup_restore_inferior_thread_state,
3407 discard_inferior_thread_state,
3408 get_inferior_thread_state_regcache): New functions.
3409 (inferior_status): Move stop_signal, stop_pc, registers to
3410 inferior_thread_state. Remove restore_stack_info.
3411 (save_inferior_status): Remove arg restore_stack_info.
3412 All callers updated. Remove saving of state now saved by
3413 save_inferior_thread_state.
3414 (restore_inferior_status): Remove restoration of state now done by
3415 restore_inferior_thread_state.
3416 (discard_inferior_status): Remove freeing of registers, now done by
3417 discard_inferior_thread_state.
3419 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3421 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
3422 at a time, times NUM_TO_SCROLL.
3423 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
3424 fetch the selected frame if there is no stack.
3426 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3429 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
3431 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
3432 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
3433 is thrown while handling an event, finish the thread state.
3434 (normal_stop): Use finish_thread_state cleanup.
3435 * infcmd.c (run_command_1): If an error is thrown while starting
3436 the inferior, finish the thread state.
3438 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3440 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
3441 skip breakpoints without a location (pending breakpoints).
3443 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3446 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
3448 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
3450 * thread.c (thread_command): Move call to annotate_thread_changed
3452 (do_captured_thread_select): ... here, to avoid printing an
3453 annotation if the thread change generates an exception.
3455 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3457 * NEWS: Document x86_64/MinGW as a new native configuration.
3459 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3461 * NEWS: Move the documentation of "info os processes" to
3462 the appropriate section (documenting the new commands).
3464 2009-01-15 Doug Evans <dje@google.com>
3466 * target.h (target_signal_to_string): Make return type const char *.
3467 (target_signal_to_name): Ditto.
3468 (target_signal_from_name): Make arg const char *.
3469 * infrun.c (sig_print_info): Update.
3470 * signals/signals.c (signals): Make array and struct members const.
3471 (target_signal_to_string): Make return type const char *.
3472 (target_signal_to_name): Ditto.
3473 (target_signal_from_name): Make arg const char *.
3475 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3476 Tristan Gingold <gingold@adacore.com>
3478 * solist.h (struct target_so_ops): New member bfd_open.
3479 (solib_find): Add prototype.
3480 (solib_bfd_fopen): Add prototype.
3481 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
3482 from solib_bfd_open.
3483 (solib_bfd_open): Use ops->bfd_open override if present. Call
3484 solib_find and solib_bfd_open otherwise.
3486 * objfiles.h (OBJF_KEEPBFD): New define.
3487 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
3488 objfile flag is set.
3489 * solib.c (symbol_add_stub): Do not allocate second BFD for
3490 shared library; use OBJF_KEEPBFD flag on solib objfile.
3492 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3494 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
3496 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3498 * value.h (address_of_variable): Add prototype.
3499 (locate_var_value): Remove prototype.
3501 * findvar.c (read_var_value): Do not attempt to default frame
3503 (locate_var_value): Remove function.
3504 * valops.c (value_of_variable): Retrieve selected frame for
3505 symbols that require a frame when called with NULL block.
3506 * valops.c (address_of_variable): New function.
3508 * eval.c (evaluate_subexp_for_address): Call address_of_variable
3509 instead of calling locate_var_value.
3510 (evaluate_subexp_with_coercion): Likewise.
3512 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
3514 * NEWS: Document "define" for prefixed commands.
3515 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
3516 show_user_1 for prefix commands.
3517 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
3518 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
3519 commands. Return the containing command list.
3520 (define_command, document_command): Update to handle prefix commands.
3521 (show_user_1): Add prefix and name arguments. Handle prefix
3523 * cli/cli-script.h (show_user_1): Update prototype.
3525 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
3527 * mingw-ser.c (console_select_thread): Add return to make
3529 (pipe_select_thread): Likewise.
3530 (file_select_thread): Likewise.
3532 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3534 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
3537 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3539 * remote.c (extended_remote_mourn_1): Invalidate our notion of
3540 current general thread.
3542 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3544 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
3545 without a live selected thread.
3547 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3549 Update the copyright notice of some of the files I missed
3550 in the previous copyright update.
3552 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3554 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
3555 base address instead of casting it to DWORD.
3557 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
3559 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
3560 for NULL frame pointers.
3562 2009-01-13 Mark Kettenis <kettenis@gnu.org>
3564 * utils.c (host_address_to_string): Reimplement in a way that
3565 avoids the cast of the address to long.
3567 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3569 * mdebugread.c (parse_symbol): Save the symbol private data
3570 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
3571 (psymtab_to_symtab_1): Likewise.
3572 (parse_procedure): Declare variable "e" only in the scope
3573 where it is used. Extract the symbol private data using
3576 2009-01-13 Jim Blandy <jimb@codesourcery.com>
3578 Abstract out common code for copying value locations.
3580 * value.h (set_value_component_location): New declaration.
3581 * value.c (set_value_component_location): New function.
3582 (value_primitive_field): Use it.
3583 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
3584 * valops.c (search_struct_field, value_slice): Same.
3585 * ada-lang.c (coerce_unspec_val_to_type)
3586 (ada_value_primitive_packed_val): Same.
3588 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3590 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
3592 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
3594 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
3596 * i386-cygwin-tdep.c: Ditto.
3597 * i386-windows-nat.c: Ditto.
3598 * windows-nat.h: Ditto.
3599 * windows-tdep.c: Ditto.
3600 * windows-tdep.h: Ditto.
3601 * windows-nat.c: Ditto.
3602 (cygwin_load_start): Redefine as CORE_ADDR.
3603 (cygwin_load_end): Ditto.
3604 (windows_make_so): Coerce result of address arithmetic to uintptr_t
3605 before coercing to CORE_ADDR to avoid a compiler warning.
3606 (handle_exception): Define addr as CORE_ADDR and coerce
3607 ExceptionAddress to uintptr_t before assigining to avoid a compiler
3609 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
3612 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3614 Fix linking with --enable-targets=all:
3615 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
3616 (HFILES_NO_SRCDIR): Add windows-tdep.h.
3617 (ALLDEPFILES): Add windows-tdep.c.
3619 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
3621 * win32-nat.h: Delete.
3622 * windows-nat.h: Rename from win32-nat.h.
3623 * win32-nat.c: Delete.
3624 * windows-nat.c: Rename from win32-nat.c.
3625 * win32-termcap.c: Delete.
3626 * windows-termcap.c: Rename from win32-termcap.c.
3627 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
3628 * configure.ac: Handle rename from win32-termcap.c ->
3630 * configure: Regenerate.
3631 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
3632 -> windows-termcap.c.
3633 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
3635 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
3636 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
3638 (win32_make_so): Handle cygwin compiler warning due to change of
3639 load_addr from DWORD to LPVOID.
3640 (handle_load_dll): Use %p in format string to properly print address
3641 and avoid a compiler warning.
3642 (DEBUG_EXCEPTION_SIMPLE): Ditto.
3643 (handle_exception): Ditto.
3644 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
3645 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
3647 * config/i386/mingw.mh: Ditto.
3648 * config/i386/mingw64.mh: Ditto.
3650 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3652 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
3653 arrayprint_recurse_level to a parameter. Update all the callers. New
3654 comment at autovariables.
3656 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3658 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
3661 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3663 * target.c (target_xfer_partial): Use host_address_to_string to
3664 print the address of readbuf and writebuf. Cast the address of
3665 elements inside the myaddr buffer into intptr_t.
3666 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
3667 Cast the address of elements inside the myaddr buffer into
3670 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3672 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
3673 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
3674 * configure.host, configure.tgt: Add handling for x86_64/windows.
3675 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
3676 and amd64-windows-tdep.c.
3678 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3680 * win32-tdep.h, win32-tdep.c: New files.
3681 * i386-cygwin-tdep.h: Delete.
3682 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
3684 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
3685 * win32-nat.c: Likewise.
3686 * configure.tgt: Add win32-tdep.o to the list of target object
3687 files for i386-cygwin and i386-mingw targets.
3689 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3691 * win32-nat.h: New file.
3692 * win32-nat.c (mappings): Initialize to NULL.
3693 (win32_set_context_register_offsets): New function.
3694 * i386-windows-nat.c: New file.
3695 (mappings): Moved here from win32-nat.c.
3696 (_initialize_i386_windows_nat): New function.
3697 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
3698 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
3700 2009-01-09 Andreas Schwab <schwab@suse.de>
3702 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
3704 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
3706 * gdbtypes.c (append_composite_type_field): Correct the location of
3709 2009-01-09 Pedro Alves <pedro@codesourcery.com>
3711 * defs.h (deprecated_error_hook): Delete declaration.
3712 * interps.c (clear_interpreter_hooks): Adjust.
3713 * remote-sim.c (gdb_os_error): Don't try to call
3714 deprecated_error_hook. No need to call exit anymore.
3715 * top.c (deprecated_error_hook): Delete.
3717 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3719 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
3720 to print the address of the gdbarch pointer.
3722 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3724 * gdbarch.sh: Fix all the compilation errors on amd64-windows
3725 due to casting a pointer to a long when printing a function
3726 address. Instead, use host_address_to_string to convert our
3727 address to a string.
3728 * gdbarch.c: Regenerate.
3730 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3732 * event-top.c (async_disconnect, async_stop_sig): use "raise"
3733 instead of "kill" to raise a signal.
3735 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3737 * win32-nat.c (get_module_name): Change the type of parameter
3738 "base_address" to LPVOID. Remove unnecessary cast.
3739 (struct lm_info): Change type of load_addr to LPVOID.
3740 (win32_make_so): Change the type of parameter "load_addr"
3741 to LPVOID. Remove some unnecessary casts.
3742 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
3743 (win32_xfer_shared_libraries): Add missing cast.
3745 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3747 * win32-nat.c (has_detach_ability, set_process_privilege):
3748 Cast the result of GetProcAddress to (void *) to avoid
3749 a compilation warning.
3751 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3753 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
3756 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3758 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
3759 definition of local variable "done".
3760 (info_w32_command, handle_exception): Remove unnecessary cast.
3762 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3764 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
3765 DebugSetProcessKillOnExit. Update all uses in this file.
3766 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
3767 Update all uses in this file.
3769 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3771 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
3772 and use it when pushing the target.
3773 (win32_attach, win32_create_inferior): Update call to
3774 do_initial_win32_stuff.
3775 (win32_detach, win32_mourn_inferior): Use our ops parameter
3776 instead of the global win32_ops to unpush the target.
3778 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3780 * ser-mingw.c (ser_windows_open): Use proper type when casting
3781 in call to _open_osfhandle.
3783 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
3785 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
3787 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3789 * CONTRIBUTE: Minor reformatting.
3791 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
3793 * MAINTAINERS: Add myself to Write After Approval.
3794 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
3797 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
3799 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
3800 Call exit to make it obvious to GCC.
3802 2009-01-08 Tom Tromey <tromey@redhat.com>
3804 PR breakpoints/9350:
3805 * varobj.c (varobj_invalidate): Unconditionally free
3807 * symfile.c (syms_from_objfile): Free local_addr when returning
3809 * exec.c (exec_file_attach): Do cleanups before returning.
3810 (exec_file_command): Likewise.
3811 * corefile.c (reopen_exec_file): Do cleanups before returning.
3812 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
3814 (do_vec_free): New function.
3815 (update_global_location_list): Make a cleanup for old_locations.
3816 Do cleanups before returning. Remove unused variable 'e'.
3817 (find_condition_and_thread): Free result of parsing the
3819 (print_it_typical): Do cleanups before returning.
3820 (breakpoint_re_set_one): Always free sals.sals.
3822 2009-01-08 Joel Brobecker <brobecker@adacore.com>
3823 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3825 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
3828 2009-01-07 Doug Evans <dje@google.com>
3830 * top.c (gdb_prompt_string): Delete, unused.
3832 2009-01-07 Pedro Alves <pedro@codesourcery.com>
3834 Delete ONE_PROCESS_WRITETEXT leftovers.
3836 * breakpoint.c (insert_bp_location): Delete process_warning
3838 (insert_breakpoint_locations): Adjust.
3839 (reattach_breakpoints): Adjust.
3840 * infrun.c (normal_stop): Drop "It might be running in another
3843 2009-01-07 Stan Shebs <stan@codesourcery.com>
3845 * config/pa/linux.mh (XDEPFILES): Remove.
3847 2009-01-07 Doug Evans <dje@google.com>
3849 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
3851 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
3853 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
3854 spacing, a regression from 2008-04-22.
3856 2009-01-07 Joel Brobecker <brobecker@adacore.com>
3858 * utils.c (gdb_print_host_address): Adjust implementation to
3859 reuse host_address_to_string. Move comment explaining the conversion
3860 from host address to string from here...
3861 (host_address_to_string): ... to there.
3863 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3865 * MAINTAINERS: Add myself for write after approval privileges.
3867 2009-01-06 Tom Tromey <tromey@redhat.com>
3869 * value.c (set_internalvar): Use value_free, not xfree.
3871 2009-01-06 Jim Blandy <jimb@red-bean.com>
3873 Check return values of functions declared with warn_unused_result
3874 attribute in GLIBC 2.8.
3875 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
3876 * inflow.c (check_syscall): New function.
3877 (new_tty): Use check_syscall to check return values from open and dup.
3878 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
3879 * main.c (captured_main): Call cwd after setting up gdb_stderr;
3880 check for errors from getcwd.
3881 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
3882 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
3883 (stdio_file_fputs): Same.
3884 * utils.c (internal_vproblem): abort if last-ditch error message
3887 * top.c (gdb_init): Don't set the current directory here; that's
3888 already been done in captured_main.
3890 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
3892 * ser-tcp.c: Adjust includes.
3893 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
3894 (tcp_auto_retry, tcp_retry_limit): Declare.
3895 (TIMEOUT): Remove, in favor of tcp_retry_limit.
3896 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
3897 (wait_for_connect): New function.
3898 (net_open): Use it. Add auto-retry logic.
3899 (set_tcp_cmd, show_tcp_cmd): New functions.
3900 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
3901 and "set/show tcp connect-timeout" commands.
3902 * NEWS: Document new commands.
3904 2009-01-05 Tom Tromey <tromey@redhat.com>
3906 * python/python-internal.h (Py_ssize_t): Define as int.
3908 2009-01-05 Jim Blandy <jimb@red-bean.com>
3910 * MAINTAINERS: Fix my e-mail address as steering committee member.
3912 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3914 Updated copyright notices for most files.
3916 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3918 * top.c (print_gdb_version): Update copyright year.
3920 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3922 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
3924 2009-01-01 Pedro Alves <pedro@codesourcery.com>
3926 PR breakpoints/9681:
3927 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
3928 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
3929 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
3930 retrow all other exceptions.
3932 For older changes see ChangeLog-2008.
3938 version-control: never