1 2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
3 From Rodney Brown <RodneyBrown@pmsc.com>
4 * ui-out.c (ui_out_set_flags): Fix typo, removing warning and
5 potentially harming mistake.
7 2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
9 * arm-tdep.c: Use header file instead of extern declarations for
10 the {get,set}_arm_regname* functions.
12 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
14 * configure.in: Replaces obsolete gdbtk-variable.c with
16 * configure: Regenerate.
17 * Makefile.in: Remove obsolete/extraneous references to
20 2000-02-16 Mark Kettenis <kettenis@gnu.org>
22 * target.c (do_target_signal_to_host): Do not use REALTIME_LO in
23 the conversion of the signal number. TARGET_SIGNAL_REALTIME_33 is
24 33 by definition, whereas REALTIME_LO might be 32 on systems that
25 have SIG32 such as Linux. Make sure that the signal number
26 returned is within the range specified by REALTIME_LO and
29 2000-02-16 Mark Kettenis <kettenis@gnu.org>
31 * configure: Regenerated.
33 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
35 * arm-tdep.c (set_disassembly_flavor, arm_othernames,
36 _initialize_arm_tdep): Allows the user to choose between any of
37 the flavors available for the disassembly to be used in the "info
38 reg" command and elsewhere in gdb. It prevents having to maintain
39 this information in two places by using the data kept in the
42 2000-02-09 Mark Kettenis <kettenis@gnu.org>
44 * configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
45 prfpregset_t in <sys/procfs.h>.
46 * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
48 * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
49 prgregset_t and prfpregset_t if they are not already present.
51 Wed Feb 16 19:00:02 2000 Andrew Cagney <cagney@b1.cygnus.com>
53 From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
54 * procfs.c: Define MERGEPID if not defined. For osf4.0e.
56 2000-02-15 Jason Molenda (jsm@bugshack.cygnus.com)
58 * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
61 2000-02-15 Kevin Buettner <kevinb@redhat.com>
64 * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
65 to correct value for generic dummy frames. When using
66 generic dummy frames, don't attempt to write TOC value or
67 function to call into the call dummy.
68 (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
69 code to also handle the PowerOpen ABI.
70 (ppc_push_return_address): Enable for all ports.
71 * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
72 PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER,
73 CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
74 CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
75 provided by generic RS6000 definitions so that call dummies
76 are implemented using generic dummy frames instead.
78 * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
79 prior to changing the stack pointer via ptrace(). Also, ignore
80 attempts to store to undefined registers that are less than
83 * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
84 frame from 436 to 448 to account for alignment padding.
85 (rs6000_push_arguments): Obtain actual register size instead
86 of assuming the register is 4 bytes long. [There's still
87 more work to be done to totally remove the 4 byte assumption,
88 however.] Make sure the stack is 16 byte aligned as required
89 by the PowerOpen ABI. Also, make sure that small structures
90 passed in registers are properly aligned within the register.
92 2000-02-15 Jesper Skov <jskov@cygnus.co.uk>
94 Patch applied by Kevin Buettner <kevinb@redhat.com>
96 * rs6000-tdep.c (skip_prologue): skip copying of argument
97 registers to local variable registers.
99 2000-02-14 Jim Kingdon <kingdon@redhat.com>
101 * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale. A
102 sym->section->index number is not a SECT_OFF_* code.
104 Tue Feb 15 12:07:30 2000 Andrew Cagney <cagney@b1.cygnus.com>
106 * MAINTAINERS (write after approval): Add H.J. Lu.
108 2000-02-14 Nick Clifton <nickc@cygnus.com>
110 * sh-tdep.c: Remove extraneous code.
112 2000-02-14 Amit S. Kale <akale@veritas.com>
114 * elfread.c (elf_symtab_read): Move the use of sym to after where
116 Checked in by Jim Kingdon <kingdon@redhat.com>
118 Mon Feb 14 15:39:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
120 * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.
122 Mon Feb 14 15:20:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
124 From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
125 * dwarf2read.c: (die_is_declaration): New fn.
126 (read_structure_scope): Use it.
128 * dwarf2read.c: (die_is_declaration): Convert to ISO-C.
130 2000-02-10 J.T. Conklin <jtc@redback.com>
132 * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
133 * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
135 * gdbserver/low-nbsd.c: New file.
137 * gdbserver/Makefile.in: convert to autoconf.
138 * gdbserver/configure.in: likewise.
139 * gdbserver/configure: generate.
141 Sun Feb 13 11:21:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
143 * CONTRIBUTE: New file. How to contribute to GDB.
145 Sun Feb 13 10:34:48 2000 Andrew Cagney <cagney@b1.cygnus.com>
147 * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners. Add Kevin
148 Buettner to powerpc maintainers. Make Kevin Buettner the
149 GNU/LINUX PPC native maintainer. Add J.T. Conklin, Jim Kingdon
150 and Jason Molenda to write after aproval list.
152 Sun Feb 13 10:18:44 2000 Andrew Cagney <cagney@b1.cygnus.com>
154 * MAINTAINERS: Reformat. Separate into check-in categories.
156 Sat Feb 12 01:08:21 EST 2000 Nicholas Duffek <nsd@cygnus.com>
158 * uw-thread.c: Remove __FUNCTION__ GNUism.
160 2000-01-17 Amit S. Kale <akale@veritas.com>
162 * elfread.c (elf_symtab_read): Use offset for the section in which a
163 symbol resides, instead of .text section for calculating address of a
165 Checked in by Jim Kingdon <kingdon@redhat.com>
167 2000-02-10 Mark Kettenis <kettenis@gnu.org>
169 * gnu-nat.c: Remove hackery to include <bits/waitflags.h>. It is
170 no longer necessary now we have gdb_wait.h.
172 2000-02-09 Mark Kettenis <kettenis@gnu.org>
174 * gnu-nat.c (proc_string): Make global.
175 (do_mach_notify_dead_name): Suppress dead name notifications if we
176 know that the task is dead.
178 1999-12-13 Mark Kettenis <kettenis@gnu.org>
180 * gnu-nat.c (inf_validate_task_sc): Get task info via proc server
181 instead of directly from the kernel. Add some hackery to make
182 sure that the info isn't influenced by suspension of the task in
183 the proc server itself.
185 2000-02-10 Jim Kingdon <kingdon@redhat.com>
187 * defs.h (MERGEPID): Added. Patch submitted by Andrew Hobson and
188 approved by Michael Snyder.
190 2000-02-09 Mark Kettenis <kettenis@gnu.org>
192 * linux-thread.c: Include defs.h before gdb_wait.h.
194 Wed Feb 9 18:59:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
196 * Makefile.in (wait_h): Delete macro. Update all dependencies
197 specifying gdb_wait.h instead.
199 * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
200 remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
201 remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
202 convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
203 remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
204 remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
205 remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
206 ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
207 infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
208 fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
210 * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.
212 * gdb_wait.h: New file. Based on ../include/wait.h. Include
213 <sys/wait.h> or <wait.h> and then define any missing WIF macros.
215 Wed Feb 9 01:14:54 2000 Andrew Cagney <cagney@amy.cygnus.com>
217 * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
218 * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
219 (d10v_stack_align): Declare.
220 * d10v-tdep.c (d10v_stack_align): Define.
222 1999-08-23 J.T. Conklin <jtc@redback.com>
224 * top.c (remote_timeout): Change default to 2. Add comment
225 explaining history of changes to the default value.
226 * remote.c (_initialize_remote): Remove code that adds set/
227 show remotetimeout, as that's also done in top.c
229 1999-10-18 J.T. Conklin <jtc@redback.com>
231 * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
232 Return E01 instead of P01 when 'P' command fails.
234 2000-02-05 J.T. Conklin <jtc@redback.com>
236 * remote.c (putpkt_binary): Handle NAK from target stub.
238 2000-02-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
240 * configure.in: Remove the addition of sol-thread.c to the
241 CONFIG_INITS list. This caused problems with init.c, because
242 sol-thread.c would be grepped twice for _initialize_* functions.
244 * Makefile.in: Add FIXME for init.c.
246 2000-02-07 Jim Kingdon <kingdon@redhat.com>
248 Clean up compiler warnings:
249 * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
250 stack.c, valprint.c: Change variables to unsigned.
251 * bcache.c: Rearrange to avoid warnings about variables not being set.
252 * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
253 rather than declaring print_max and repeat_count_threashold
254 ourselves (incorrectly).
255 * valprint.h: Do declare repeat_count_threashold.
256 * ch-exp.c: Use default case for internal error.
257 * findvar.c: Don't omit argument type.
258 * symtab.c: Remove unused variable.
260 2000-02-04 Jim Blandy <jimb@redhat.com>
262 * c-typeprint.c (remove_qualifiers): New function.
263 (c_type_print_base): Use it to remove qualifiers from C++
264 qualified names, not strrchr.
266 * c-typeprint.c (c_type_print_base): Recognize type conversion
267 operators by calling is_type_conversion_operator.
268 (is_type_conversion_operator): New function.
270 2000-02-04 Nick Clifton <nickc@cygnus.com>
272 * config/arm/tm-arm.h (LOWEST_PC): Define.
274 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
276 * infrun.c (resume): Make just one call to target_resume(), instead
277 of four: set up correct parameters in all the cases ahead of time,
278 and do call at the end.
280 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
282 * config/powerpc/tm-ppc-eabi.h: Define
283 SOFUN_ADDRESS_MAYBE_MISSING.
285 2000-02-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
287 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
290 Fri Feb 4 22:42:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
292 * Makefile.in (INIT_FILES): Append CONFIG_INITS
293 * configure.in (CONFIG_INIT): Initialize.
294 (links): Link srcdir/gdbtk/library to gdbtcl2.
295 * gdbtcl2: Moved to gdbtk/library.
296 ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
297 gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
298 gdbtk.h: Moved to gdbtk/generic.
300 2000-02-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
302 * printcmd.c (build_address_symbolic): New function. Returns all
303 the parts that are necessary to print an address in a symbolic
305 (print_address_symbolic): Split into a printing part and an
306 information building part, build_address_symbolic().
308 * defs.h (build_address_symbolic): Export.
310 2000-02-03 Jim Blandy <jimb@redhat.com>
312 * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
315 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
317 * arm-tdep.c (arm_push_arguments): Fix passing of floating point
318 arguments on dummy frames.
320 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
322 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
323 (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
325 2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
327 * remote.c (getpkt_sane): New function. It is the old getpkt(),
328 which now returns a timeout indication.
329 (getpkt): New function. Wrapper for getpkt_sane(), so that return
330 value can still be ignored.
332 Tue Feb 1 18:47:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
334 * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
337 Tue Feb 1 00:17:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
339 * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c. Rename
340 ``struct gdb_file'' to ``struct ui_file''. Delete typedef
343 * Makefile.in: Update.
345 * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
346 c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
347 ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
348 cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
349 expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
350 frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
351 gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
352 jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
353 m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
354 printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
355 remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
356 ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
357 serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
358 target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
359 utils.c, v850ice.c, valprint.c, valprint.h, value.h,
360 config/pa/tm-hppa.h: Update.
361 * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
363 2000-01-31 Jason Molenda (jsm@bugshack.cygnus.com)
365 * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
366 config/i386/i386dgux.mh, config/i386/i386sol2.mh,
367 config/i386/i386v4.mh, config/i386/i386v42mp.mh,
368 config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
369 config/m88k/delta88v4.mh, config/mips/irix4.mh,
370 config/mips/irix5.mh, config/mips/mipsv4.mh,
371 config/powerpc/solaris.mh (NATDEPFILES): Change references to
372 proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
373 proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
375 Mon Jan 31 17:14:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
377 * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
379 * main.c (captured_main): Only use the legacy tui_file code when
380 linking in older code such as the TUI.
382 * gdb-file.h, gdb-file.c: New files.
383 * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
384 null_file_isatty, null_file_rewind, null_file_put,
385 null_file_flush, null_file_write, null_file_fputs,
386 null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
387 gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
388 set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
389 set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
390 set_gdb_file_data, struct accumulated_gdb_file,
391 do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
392 mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
393 mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
394 stdio_file_delete, stdio_file_flush, stdio_file_write,
395 stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
396 Moved to gdb-file.h and gdb-file.c.
397 * utils.c (enum streamtype, struct tui_stream, tui_file_new,
398 tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
399 tui_file_rewind, tui_file_put, tui_file_fputs,
400 tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
401 fputs_unfiltered_hook):
402 Moved to tui/tui-file.c and tui/tui-file.h.
404 * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
405 (tui-file.o, gdb-file.o): Add dependencies.
406 (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
407 * main.c: #include tui/tui-file.h.
409 2000-01-28 Fred Fish <fnf@cygnus.com>
411 * findvar.c (value_from_register): Special case handling of D10V
412 pointer values fetched from registers.
414 2000-01-28 Fernando Nasser <fnasser@totem.to.cygnus.com>
416 * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
417 support for new style thumb prologues.
419 2000-01-28 Nick Clifton <nickc@redhat.com>
421 * arm-tdep.c: Remove extraneous dash at start of strings
422 introduced in previous delta.
424 2000-01-27 Nick Clifton <nickc@redhat.com>
426 * arm-tdep.c: Replace uses of arm_toggle_renames() with
427 parse_arm_disassembler_option().
429 2000-01-27 Jim Blandy <jimb@cygnus.com>
431 * symtab.c (decode_line_1): Don't let commas that are within
432 quotes or parenthesis terminate the line spec. Don't use pp when
433 removing the final double quote of a double-quoted string. Don't
434 forget to skip the opening double quote. I have no clue whether
435 this change is correct; probably we've just moved this function
436 from one buggy place to another buggy place, and never came within
437 an outhouse whiff of correctness.
438 (find_toplevel_char): New function.
440 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
442 * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
443 passing the pointer to a thumb function as an argument.
445 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
447 * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
448 are reinserted for another run.
450 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
452 * cli-out.c (cli_filed_string): Test for NULL string.
454 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
456 * infcmd.c (run_stack_dummy): Account for a random signal stopping
457 the inferior as well as breakpoints being hit while performing an
458 inferior function call.
459 * valops.c (hand_function_call): Ditto.
461 2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
463 From Mark Kettenis <kettenis@gnu.org>
465 * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
466 i386_REGS_SEGS_STATE.
467 (HAVE_I387_REGS): Define.
468 (FLOAT_INFO): Remove.
469 * i386gnu-nat.c: Almost completely rewritten to use new i386
470 register layout and `float info' implementation.
471 * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
472 Move prototypes from here.
473 * gnu-nat.h: To here.
475 2000-01-24 Kevin Buettner <kevinb@redhat.com>
477 * utils.c (get_field, put_field): Fix buffer underruns and
478 overruns. Also, handle case where total_len is not evenly
480 (getfield): Make sure zeroing of unwanted bits occurs even
481 when bit field to extract does not straddle two or more
484 2000-01-23 Christopher Faylor <cgf@cygnus.com>
486 * defs.h: Add gdb_thread_select declaration.
488 2000-01-23 Kevin Buettner <kevinb@redhat.com>
490 * linux-thread.c (_initialize_linuxthreads): Make sure that
491 linuxthreads_block_mask does not block SIGCHLD.
493 2000-01-20 Fernando Nasser <fnasser@totem.to.cygnus.com>
495 * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
496 text so that new lines work properly.
498 2000-01-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
500 * proc-utils.h: New file. Export functions from proc-*.c.
502 * proc_api.c: Rename to:
503 * proc-api.c: New file. Add include of proc-utils.h.
505 * proc_events.c: Rename to:
506 * proc-events.c: New file.
508 * proc_flags.c: Rename to:
509 * proc-flags.c: New file.
511 * proc_why.c: Rename to:
512 * proc-why.c: New file. Add include of proc-utils.h.
514 * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
515 ctype.h, proc-utils.h.
516 (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
517 (open_procinfo_files): Conditionalize local variable tmp, to avoid
519 (proc_iterate_over_mappings): Conditionalize local vars mapfd and
521 (procfs_wait): Adjust format in some printf_filetered calls to
522 avoid compiler warnings.
523 (make_signal_thread_runnable): Ifdef 0. The calls to this function
525 (procfs_resume): Add parentheses around '&&' operation.
526 (procfs_set_exec_trap): Remove unused variable.
527 (info_proc_cmd): Add braces to avoid ambiguous else clause.
529 * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
530 proc-why.o): Update dependencies.
532 * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
535 2000-01-17 Jason Molenda (jsm@bugshack.cygnus.com)
537 * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
538 Fix from Robert Lipe <robertl@sco.com>.
539 * configure: Regenerated.
541 2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
543 * stack.c (print_frame_info_base): Break up into the frame info
544 (location) printing part and the rest (source line printing).
545 (print_frame): New function. Take care of printing the location
549 * infrun.c (normal_stop): Use enum values rather than integers for the
550 source_flag to be passed to show_and_print_stack_frame().
553 * frame.h (print_what): New enum for 'source' argument to
554 print_frame_info_base(). Use this instead of obscure numbers.
557 Sun Jan 16 17:58:00 2000 David Taylor <taylor@texas.cygnus.com>
559 * event-top.c (stdin_event_handler): call quit_command rather than
560 exit -- run cleanups, give target code a chance to say goodbye to
561 the target. Fixes bug where the inferior processes were left
562 around on Solaris (and probably elsewhere) by the testsuite.
564 2000-01-14 Mark Salter <msalter@cygnus.com>
566 * v850-tdep.c (v850_target_architecture_hook): Setup correct
567 machine id for disassembly.
569 2000-01-13 Jim Blandy <jimb@cygnus.com>
571 * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
572 convert_to_regset, when regno indicates a specific register.
574 Thu Jan 13 23:34:17 EST 2000 Nicholas Duffek <nsd@cygnus.com>
576 * uw-thread.c: Document libthread.so debugging interface. Minor
577 comment and formatting tweaks.
578 (DEBUG): #define as 0 instead of 1.
579 (CALL_BASE): Include function name in error msg.
580 (libthread_stub): Adjust inferior_pid after thread exit.
581 (uw_thread_create_inferior): Deactivate uw_thread_ops before
582 asking procfs_ops to create inferior.
583 (libthread_init): Don't return nonlocally on error.
585 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
587 * rdi-share/ardi.c (negotiate_params): Fix initialization of static
590 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
592 * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
593 both sides are on the same state.
595 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
597 * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
598 115200 (minor syntax mistake).
600 2000-01-12 Jim Blandy <jimb@cygnus.com>
602 * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
603 this here, to go along with the definitions of PIDGET and TIDGET.
605 2000-01-12 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
607 * thread.c (do_captured_thread_select): New function. Switch
608 current thread, safely from within catch_errors().
609 (gdb_thread_select): New function. Switch threads safely.
610 (thread_command): Use gdb_thread_select().
612 (do_captured_list_thread_ids): New function.
613 (gdb_list_thread_ids): New function.
615 * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
617 2000-01-11 Christopher Faylor <cgf@cygnus.com>
619 * configure.in: Avoid linking -limagehlp unless it's a native build.
620 * configure: Regenerate.
621 * thread.cc (add_thread): Clear private data pointer here or suffer
622 strange behavior when it is checked for NULL later.
624 2000-01-09 Christopher Faylor <cgf@cygnus.com>
626 * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
627 * configure.in: Add an additional library to cygwin link.
628 * configure: Regenerate.
630 Patch from Egor Duda <deo@logos-m.ru>:
631 * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
634 2000-01-07 Michael Snyder <msnyder@cleaver.cygnus.com>
636 * uw-thread.c: New file to support UnixWare user-mode threads:
637 contributed by Nickolas Duffek <nsd@cygnus.com>.
638 * target.h (struct target_ops): New vector, to_extra_thread_info,
639 allows back-ends to give extra details in info thread display.
640 (target_extra_thread_info): define new macro.
641 (target_find_new_threads): simplify macro. Cleanup comments.
642 * target.c (to_extra_thread_info): default and inherit new vector.
643 (cleanup_target): eliminate PARAMS, break up long lines,
644 provide default definition for to_extra_thread_info, and
645 to_find_new_threads. Default to_thread_alive and to_query
646 to return_zero, not target_ignore (they each return int not void).
647 (debug_to_find_new_threads): new debug entry.
648 (setup_target_debug): add debug_to_find_new_threads.
649 * gdbthread.h: export struct thread_info, find_thread_pid, and
650 iterate_over_threads. Add comments. Eliminate PARAMS. Update
651 copyright. Add new private data pointer for use by target back-ends.
652 * thread.c (struct thread_info): move definition to gdbthread.h.
653 (find_thread_pid): new exported function for thread lookup.
654 (iterate_over_threads): new exported function for applying
655 arbitrary operations to threads. Update copyright to 2000.
656 (info_threads_command): use new target_extra_thread_info vector
657 to display extra information about each thread (if implemented).
658 * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
659 Add defines for PIDGET, etc.
660 * config/i386/tm-i386sol2.h: ditto.
661 * config/sparc/tm-sun4sol2.h: ditto.
662 * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
663 * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
664 if -lpthread and -lpthreads fail.
666 * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
667 (proc_flags): combine flags that UnixWare splits into two locations.
668 (proc_modify_flag): add support for PR_KLC (kill on last close).
669 (proc_[un]set_kill_on_last_close): new functions.
671 2000-01-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
673 * infrun.c (normal_stop): Print out thread id when we stop.
675 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
677 * remote.c (remote_open_1): Fix message so it does not imply a
678 specific syntax for serial ports, as it is OS dependent.
679 (remote_async_open_1): Ibid.
680 (init_remote_ops): Ibid.
682 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
684 * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
685 "set remotebaud" command (if set) when no speed is specified on
686 the "target rdi" command.
688 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
690 * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
692 (baud_options[]): Ibid.
694 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
696 * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
697 used by each operating system.
699 2000-01-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
701 * breakpoint.c (until_break_command): Add an argument for the
702 continuation, the beginning of the cleanups set up by this
704 (until_break_command_continuation): Do cleanups until the one
705 passed in as argument instead of doing all of them.
707 * infcmd.c (finish_command_continuation): Expect a new argument,
708 which indicates up to where to do cleanups. Update calls to
709 do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
710 (finish_command): Add another argument for the continuation: the
711 starting cleanup for this command.
713 2000-01-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
715 From Grant Edwards <grante@visi.com> (original patch from Thomas
717 * rdi-share/ardi.c: Allow interruption of interruptible
718 targets with a <CNTL-C>.
720 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
722 * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
723 to control port to accommodate some versions of Angel.
725 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
727 * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
728 Add interpretation for C Support Library packets.
730 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
732 * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
733 is now being modified.
734 * rdi-share/devsw.h: Adjust declaration of the above funtion.
736 For older changes see ChangeLog-99
742 version-control: never