* remote.c (extended_remote_create_inferior_1): Clean up

[binutils-gdb.git] / gdb / ChangeLog

2008-05-08  Daniel Jacobowitz  <dan@codesourcery.com>

        * remote.c (extended_remote_create_inferior_1): Clean up
        before marking the target running.

2008-05-08  Joel Brobecker  <brobecker@adacore.com>

        * hppa-tdep.h, hppa-tdep.c, hppa-hpux-tdep.c: Update for unwinder
        changes.

2008-05-07  Joel Brobecker  <brobecker@adacore.com>

        * sparc-tdep.c, sparc-tdep.h, sparc-sol2-tdep.c, sparc64-tdep.c,
        sparc64-sol2-tdep.c: Update for unwinder changes.

2008-05-07  Daniel Jacobowitz  <dan@codesourcery.com>

        * cp-support.c (mangled_name_to_comp): Initialize storage.
        (unqualified_name_from_comp): Likewise.

2008-05-07  Jie Zhang  <jie.zhang@analog.com>

        * remote.c (remote_insert_breakpoint): Call get_remote_state
        after gdbarch_breakpoint_from_pc is called.
        (remote_insert_hw_breakpoint): Likewise.

2008-05-06  Joel Brobecker  <brobecker@adacore.com>

        * valprint.c (val_print): Add new language parameter and use it
        instead of using the current_language. Update calls to val_print
        throughout.
        (common_val_print): Add new langauge parameter and pass it to
        val_print.
        * value.h (struct language_defn): Add opaque declaration.
        (val_print, common_val_print): Update declarations.
        * stack.c (print_frame_args): Update call to common_val_print
        using the appropriate language.
        * mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
        * c-valprint, f-valprint.c, m2-valprint.c, mt-tdep.c, infcmd.c,
        mi/mi-main.c, jv-valprint.c, ada-valprint.c, varobj.c, p-valprint.c,
        scm-valprint.c, cp-valprint.c, sh64-tdep.c, printcmd.c:
        #include "language.h" if necessary.
        Update calls to val_print and common_val_print.
        * Makefile.in (mt-tdep.o, sh64-tdep.o, mi-cmds.o, mi-main.o):
        Update dependencies.

2008-05-06  Joel Brobecker  <brobecker@adacore.com>

        * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Treat addresses
        pointing inside a non-executable section as function descriptors.

2008-05-06  Pedro Alves  <pedro@codesourcery.com>

        * inf-loop.c (inferior_event_handler): Run all continuations and
        print any language change before running the breakpoint commands.

2008-05-06  Joel Brobecker  <brobecker@adacore.com>

        * frame-unwind.c (frame_unwind_got_bytes): New function.
        * frame-unwind.h (frame_unwind_got_bytes): Add declaration.
        * libunwind-frame.h, libunwind-frame.c, ia64-tdep.c: Update
        for unwinder changes.

2008-05-05  Doug Evans  <dje@google.com>

        * NEWS: Mention new /m modifier for disassemble command.
        * cli/cli-cmds.c (print_disassembly): New function.
        (disassemble_current_function): New function
        (disassemble_command): Recognize /m modifier, print mixed
        source+assembly.
        (init_cli_cmds): Update disassemble help text.

2008-05-05  Maxim Grigoriev  <maxim2405@gmail.com>

        * xtensa-tdep.c: Update for unwinder changes.

2008-05-05  Andreas Schwab  <schwab@suse.de>

        Update m68k port for unwinder changes.
        * m68k-tdep.c (m68k_frame_cache): Expect this_frame.
        (m68k_frame_this_id, m68k_frame_prev_register): Update signature.
        (m68k_frame_unwind): Use default_frame_sniffer.
        (m68k_frame_sniffer): Remove.
        (m68k_frame_base_address): Expect this_frame.
        (m68k_dummy_id): Renamed from m68k_unwind_dummy_id.  Expect
        this_frame.
        (m68k_gdbarch_init): Use set_gdbarch_dummy_id,
        dwarf2_append_unwinders, and frame_unwind_append_unwinder.
        * m68klinux-tdep.c (m68k_linux_pc_in_sigtramp): Expect frame_info
        parameter instead of pc value.
        (m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
        Expect this_frame.
        (m68k_linux_sigtramp_frame_this_id)
        (m68k_linux_sigtramp_frame_prev_register)
        (m68k_linux_sigtramp_frame_sniffer): Update signature.
        (m68k_linux_sigtramp_frame_unwind): Use
        m68k_linux_sigtramp_frame_sniffer.
        (m68k_linux_init_abi): Use frame_unwind_append_unwinder.

        * m68klinux-nat.c (store_register): Fix typo.

2008-05-05  Pedro Alves  <pedro@codesourcery.com>

        * infcmd.c (step_1): Put thread id on the stack to avoid possible
        NULL dereferencing.

2008-05-05  Luis Machado  <luisgpm@br.ibm.com>

        * symfile.c (reread_symbols): Update objfile's entry point.

2008-05-05  Aleksandar Ristovski  <aristovski@qnx.com>
            Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c: Update throughout to use symbol_matches_domain
        instead of matching the symbol domain explictly.
        * dwarf2read.c (add_partial_symbol): Do not add new psym for
        STRUCT_DOMAIN. Make sure you recognize c++ struct and java and ada
        class as typedefs. See lookup_partial_symbol function.
        (new_symbol): Similar to add_partial_symbol, do not create
        symbol for the typedef. See lookup_block_symbol.
        * symtab.c (symbol_matches_domain): New function, takes care
        of dual meaning of STRUCT_DOMAIN symbol for c++, ada and java.
        (lookup_partial_symbol): Use symbol_matches_domain to see if the
        found psym domain matches the given domain.
        (lookup_block_symbol): Likewise.

2008-05-05  Vladimir Prus  <vladimir@codesourcery.com>

        * top.c (command_line_handler_continuation): Remove.
        (execute_command): Do not install the above.

2008-05-05  Vladimir Prus  <vladimir@codesourcery.com>

        * inf-loop.c (inferior_event_handler): Call bpstat_do_action,
        and catch all exceptions from it.
        * top.c (command_line_handler_continuation): Don't
        call bpstat_do_action here.

2008-05-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2read.c (struct dwarf2_cu): Add type_hash.
        (struct die_info): Remove type.
        (read_type_die, read_typedef, read_base_type, read_subrange_type)
        (read_structure_type, read_enumeration_type, read_array_type)
        (read_tag_pointer_type, read_tag_ptr_to_member_type)
        (read_tag_reference_type, read_tag_const_type, read_tag_volatile_type)
        (read_tag_string_type, read_subroutine_type, read_set_type)
        (read_unspecified_type): Delete prototypes.  Remove check for
        already-loaded type.  Return the new type.
        (set_die_type): Return the new type.
        (reset_die_and_siblings_types): Delete.
        (load_comp_unit, load_full_comp_unit): Set type_hash.
        (process_queue): Remove call to reset_die_and_siblings_types.
        (process_die): Do not read most types here.  Use read_type_die
        for others.
        (read_func_scope, dwarf2_add_member_fn): Use read_type_die.
        (quirk_gcc_member_function_pointer): Return the new type.
        (process_structure_scope, process_enumeration_scope): Use
        get_die_type and read the DIE's type.
        (read_full_die): Do not initialize die->type.
        (tag_type_to_type): Use read_type_die.
        (read_type_die): Check for already defined types.  Return the
        type.
        (determine_prefix): Use get_die_type.
        (set_die_type): Return the type.
        (get_die_type): Take a CU argument.  Check for no type_hash.

2008-05-04  Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2read.c (dwarf2_ranges_read, read_partial_die): Initialize
        locals.

2008-05-04  Pedro Alves  <pedro@codesourcery.com>

        * breakpoint.c (update_breakpoints_after_exec): Delete bp_longjmp
        and bp_longjmp_resume breakpoints.
        (breakpoint_address_is_meaningful): Claim bp_longjmp_resume as
        meaningful.
        (create_longjmp_breakpoint): Don't create bp_longjmp_resume
        breakpoints.  Create bp_longjmp breakpoints as momentary
        breakpoints.
        (enable_longjmp_breakpoint): Delete.
        (set_longjmp_breakpoint): New.
        (disable_longjmp_breakpoint): Delete.
        (delete_longjmp_breakpoint): New.
        (set_longjmp_resume_breakpoint): Delete.
        (set_momentary_breakpoint_at_pc): New.
        (breakpoint_re_set_one): Don't delete bp_longjmp and
        bp_longjmp_resume breakpoints.
        (breakpoint_re_set): Don't create longjmp and longjmp-resume
        breakpoints.

        * infrun.c (step_resume_breakpoint): Add comment.
        (struct execution_control_state): Delete handling_longjmp member.
        (init_execution_control_state). Don't clear handling_longjmp.
        (context_switch): Don't context switch handling_longjmp.
        (handle_inferior_event): If handling a bp_longjmp breakpoint,
        create a bp_longjmp_resume breakpoint, and set it as current
        step_resume_breakpoint, then step over the longjmp breakpoint.  If
        handling a bp_longjmp_resume breakpoint, don't delete the longjmp
        breakpoint, delete the longjmp-resume breakpoint, and stop
        stepping.
        (currently_stepping): Remove handling_longjmp from expression.
        (insert_step_resume_breakpoint_at_sal): Update comment.
        (insert_longjmp_resume_breakpoint): New.

        * breakpoint.h (set_momentary_breakpoint_at_pc): Declare.
        (enable_longjmp_breakpoint, disable_longjmp_breakpoint): Delete
        declarations.
        (set_longjmp_breakpoint, delete_longjmp_breakpoint): Declare.
        (set_longjmp_resume_breakpoint): Delete declaration.

        * gdbthread.h (save_infrun_state): Remove handling_longjmp
        parameter.
        (load_infrun_state): Delete *handling_longjmp parameter.
        * thread.c (save_infrun_state): Remove handling_longjmp parameter.
        Update body.
        (load_infrun_state): Delete *handling_longjmp parameter.  Update
        body.

        * infcmd.c (disable_longjmp_breakpoint_cleanup): Delete.
        (delete_longjmp_breakpoint_cleanup): New.
        (step_1): Call set_longjmp_breakpoint instead of
        enable_longjmp_breakpoint.  Use delete_longjmp_breakpoint_cleanup
        instead of disable_longjmp_breakpoint_cleanup when making cleanup.
        (step_1_continuation): Pass thread id in the continuation args to
        step_once.
        (step_once): Add thread parameter.  Pass thread id the the
        continuation.

2008-05-04  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Set CU BASE_ADDRESS already from partial DIEs.
        * dwarf2read.c (read_partial_die): New variables BASE_ADDRESS and
        BASE_ADDRESS_TYPE.  Set these variables from DW_AT_LOW_PC and
        DW_AT_ENTRY_PC.  Set CU->HEADER.BASE_KNOWN and CU->HEADER.BASE_ADDRESS
        from these variables if it was still unset.

        * Makefile.in: Update dependencies.
        * dwarf2read.c: Include "addrmap.h"
        (struct dwarf2_cu): New fields RANGES_OFFSET and HAS_RANGES_OFFSET.
        (dwarf2_ranges_read): New prototype.
        (dwarf2_build_psymtabs_hard): Initialize and prepare PSYMTABS_ADDRMAP.
        Add discontiguous range to PSYMTABS_ADDRMAP by DWARF2_RANGES_READ on
        HAS_RANGES_OFFSET, otherwise add there the contiguous range.
        (dwarf2_ranges_read): New parameter RANGES_PST, update the function
        comment for it.  Add the found ranges to RANGES_PST.  New variable
        BASEADDR, initialize it the common way.
        (dwarf2_get_pc_bounds): Update the caller for the new parameter.
        (read_partial_die): `DW_AT_ranges' now only sets RANGES_OFFSET and
        HAS_RANGES_OFFSET for the later processing.
        * objfiles.h (struct objfile): New field PSYMTABS_ADDRMAP.
        * symtab.c: Include "addrmap.h"
        (find_pc_sect_psymtab): Support reading the field PSYMTABS_ADDRMAP.
        Move the psymtab locator into ...
        (find_pc_sect_psymtab_closer): ... a new function.

2008-05-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * arch-utils.c (gdbarch_update_p): Use default values for
        info.abfd and info.target_desc if they are NULL.
        (gdbarch_from_bfd): Remove assertion.
        (set_gdbarch_from_file): Call gdbarch_find_by_info directly,
        using the current target description.
        (gdbarch_info_fill): Do not use default values for info->abfd
        and info->target_desc.

2008-05-04  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * symfile.c (reread_symbols): Reload EXEC_BFD on its change.

2008-05-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * inferior.h (read_pc_pid, write_pc_pid): Remove.
        * regcache.h (regcache_read_pc, regcache_write_pc): Add prototypes.

        * regcache.c (read_pc_pid): Remove, replace by ...
        (regcache_read_pc): ... this function.
        (write_pc_pid): Remove, replace by ...
        (regcache_write_pc): ... this function.
        (read_pc, write_pc): Update.

        * infrun.c (displaced_step_prepare): Replace read_pc_pid and
        write_pc_pid by regcache_read_pc and regcache_write_pc.
        (displaced_step_fixup): Likewise.
        (resume): Likewise.  Use regcache arch instead of current_gdbarch.
        (prepare_to_proceed): Likewise.
        (proceed): Likewise.
        (adjust_pc_after_break): Likewise.
        (handle_inferior_event): Likewise.

        * linux-nat.c (cancel_breakpoint): Likewise.
        * linux-thread-db.c (check_event): Likewise.
        * aix-thread.c (aix_thread_wait): Likewise.
        * tracepoint.c (trace_dump_command): Likewise.

2008-05-04  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * dwarf2loc.c (dwarf_expr_frame_base): Error out on missing
        SYMBOL_LOCATION_BATON.

2008-05-04  Vladimir Prus  <vladimir@codesourcery.com>

        * target.h (struct target_ops): New field to_auxv_parse.
        * auxv.c (default_auxv_parse): New, renamed from previous
        target_auxv_parse.
        (target_auxv_parse): Try to call target method.  Fallback to
        default_auxv_parse if not found.
        * procfs.c (procfs_auxv_parse): New.
        (init_procfs_ops): On Solaris, in 64-bit mode, install
        procfs_auxv_parse.

2008-05-03  Adam Nemet  <anemet@caviumnetworks.com>

        * symfile.c (add_symbol_file_command):  Use paddress rather than
        hex_string to print the address.

2008-05-03  Ulrich Weigand  <uweigand@de.ibm.com>

        * rs6000-tdep.c (rs6000_frame_this_id): If info->base is 0,
        return the null frame ID to terminate the backtrace.

2008-05-03  Ulrich Weigand  <uweigand@de.ibm.com>

        * rs6000-tdep.c: Do not include "rs6000-tdep.h".
        (rs6000_find_toc_address_hook): Move to rs6000-aix-tdep.c.
        (SIG_FRAME_PC_OFFSET): Likewise.
        (SIG_FRAME_LR_OFFSET): Likewise.
        (SIG_FRAME_FP_OFFSET): Likewise.
        (rs6000_push_dummy_call): Likewise.
        (rs6000_return_value): Likewise.
        (rs6000_convert_from_func_ptr_addr): Likewise.
        (branch_dest, rs6000_software_single_step): Likewise.
        (deal_with_atomic_sequence): Rename to ...
        (ppc_deal_with_atomic_sequence): ... this.  Adapt all callers.
        Do not call branch_dest; inline required parts of that function.
        (rs6000_skip_trampoline_code): Replace DEPRECATED_SYMBOL_NAME
        with SYMBOL_LINKAGE_NAME.
        (struct reg, regsize): Delete.
        (read_memory_addr): Delete; inline into callers.
        (rs6000_skip_prologue): Move after skip_prologue.
        (skip_prologue): Remove prototype.
        (rs6000_gdbarch_init): Remove sysv_abi variable; perform all
        initialization as if this variable were true.  Do not install
        ppc64_sysv_abi_adjust_breakpoint_address.

        * rs6000-aix-tdep.c: Include "gdb_assert.h", "gdbtypes.h",
        "gdbcore.h", "target.h", "value.h", "infcall.h", "objfiles.h",
        and "breakpoint.h".
        (rs6000_find_toc_address_hook): Move here from rs6000-tdep.c.
        (SIG_FRAME_PC_OFFSET): Likewise.
        (SIG_FRAME_LR_OFFSET): Likewise.
        (SIG_FRAME_FP_OFFSET): Likewise.
        (rs6000_push_dummy_call): Likewise.
        (rs6000_return_value): Likewise.
        (rs6000_convert_from_func_ptr_addr): Likewise.
        (branch_dest, rs6000_software_single_step): Likewise.  Replace
        tdep->text_segment_base by AIX_TEXT_SEGMENT_BASE.
        (rs6000_aix_init_osabi): Install rs6000_push_dummy_call,
        rs6000_return_value, and rs6000_convert_from_func_ptr_addr.
        Call set_gdbarch_long_double_bit and set_gdbarch_frame_red_zone_size.
        Set tdep->lr_frame_offset.  Do not set tdep->text_segment_base.

        * rs6000-tdep.h (rs6000_software_single_step): Remove prototype.
        (AIX_TEXT_SEGMENT_BASE): New macro.
        * rs6000-nat.c (exec_one_dummy_insn): Replace tdep->text_segment_base
        by AIX_TEXT_SEGMENT_BASE.

        * ppc-tdep.h (ppc_deal_with_atomic_sequence): Add prototype.
        (struct gdbarch_tdep): Remove text_segment_base member.
        * ppc-linux-tdep.c (ppc_linux_init_abi): On 64-bit, install
        ppc64_sysv_abi_adjust_breakpoint_address.

        * Makefile.in (rs6000-tdep.o): Update dependencies.
        (rs6000-aix-tdep.o): Likewise.

2008-05-03  Luis Machado  <luisgpm@br.ibm.com>
            Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * cli/cli-decode.c (lookup_cmd_1): Fix indentation.
        * doublest.c (convert_typed_floating): Fix typo in comment.
        * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
        * frame-unwind.h (frame_sniffer_ftype): Likewise.
        * frame.c (frame_unwind_address_in_block): Likewise.
        * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Likewise.
        * symtab.h (struct symbol): Likewise.
        * tramp-frame.h (struct trad_frame_cache): Likewise.
        * value.c (allocate_repeat_value): Likewise.

2008-05-03  Ulrich Weigand  <uweigand@de.ibm.com>

        * infrun.c (handle_inferior_event): Do not insert breakpoints at
        TARGET_WAITKIND_LOADED events during startup (i.e. in the shell).

2008-05-03  Pedro Alves  <pedro@codesourcery.com>

        * parse.c (parse_exp_in_context): Don't override
        expression_context_pc if get_selected_block returned a valid
        block.

2008-05-03  Daniel Jacobowitz  <dan@codesourcery.com>

        * alpha-tdep.h (ALPHA_REGISTER_BYTES): Delete.
        * arm-tdep.h (STATUS_REGISTER_SIZE): Delete.
        * breakpoint.c (args_for_catchpoint_enable, current_exception_event):
        Delete.
        * c-typeprint.c (c_type_print_base): Delete handling of template
        instantiations.
        * cp-support.h (METHOD_PTR_IS_VIRTUAL, METHOD_PTR_FROM_VOFFSET)
        (METHOD_PTR_TO_VOFFSET): Delete.
        * defs.h (QUIT_FIXME): Delete.
        * f-lang.h (DEFAULT_DOTMAIN_NAME_IN_MF77, DEFAULT_MAIN_NAME_IN_MF77)
        (DEFAULT_DOTMAIN_NAME_IN_XLF_BUGGY, DEFAULT_DOTMAIN_NAME_IN_XLF): Delete.
        * gdbtypes.h (struct cplus_struct_type): Delete is_inlined,
        ninstantiations, and instantiations.
        (TYPE_INSTANTIATIONS, TYPE_NINSTANTIATIONS, TYPE_INSTANTIATION)
        (TYPE_FN_FIELD_INLINED): Delete.
        * srec.h (SREC_BINARY): Delete.
        * symtab.c (symbol_init_demangled_name): Delete.
        * symtab.h (SYMBOL_INIT_DEMANGLED_NAME, symbol_init_demangled_name)
        (SYMBOL_OBJFILE, struct exception_event_record, CURRENT_EXCEPTION_KIND)
        (CURRENT_EXCEPTION_CATCH_SAL, CURRENT_EXCEPTION_CATCH_LINE)
        (CURRENT_EXCEPTION_CATCH_FILE, CURRENT_EXCEPTION_CATCH_PC)
        (CURRENT_EXCEPTION_THROW_SAL, CURRENT_EXCEPTION_THROW_LINE)
        (CURRENT_EXCEPTION_THROW_FILE, CURRENT_EXCEPTION_THROW_PC): Delete.
        * target.h (enum thread_control_capabilities): Delete tc_switch.
        (target_can_switch_threads): Delete.

2008-05-03  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (objfiles.o): Update.
        * exec.c (exec_set_section_address): Support p->addr != 0.
        * objfiles.c (objfile_relocate): Update exec_ops section
        addresses.
        * symfile.c (place_section): Move exec_set_section_address call...
        (default_symfile_offsets): ...to here.

2008-05-03  Ulrich Weigand  <uweigand@de.ibm.com>

        * Makefile.in (ppc_linux_tdep_h): New macro.
        (powerpc_32l_c, powerpc_altivec32_c, powerpc_altivec32l_c): Likewise.
        (powerpc_64l_c, powerpc_altivec64_c, powerpc_altivec64l_c): Likewise.
        (powerpc_e500l_c): Likewise.
        (ppc-linux-nat.o): Update dependencies.
        (ppc-linux-tdep.o): Update dependencies.
        (rs6000-tdep.o): Update dependencies.

        * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Remove.
        (ppc_linux_svr4_fetch_link_map_offsets): Remove.
        (ppc_linux_gregset, ppc_linux_fpregset): Move to ppc-linux-tdep.h
        (ppc_supply_reg, ppc_collect_reg): Add prototypes.
        (tdesc_powerpc_e500): Remove.

        * rs6000.c: Include "features/rs6000/powerpc-altivec32.c"
        and "features/rs6000/powerpc-altivec64.c".
        (ppc_supply_reg, ppc_collect_reg): Make global.
        (variants): Use tdesc_powerpc_32 for "powerpc" and
        tdesc_powerpc_altivec64 for "powerpc64".
        (_initialize_rs6000_tdep): Initialize AltiVec descriptions.

        * ppc-linux-tdep.h: New file.

        * ppc-linux-tdep.c: Include "ppc-linux-tdep.c".
        Include "features/rs6000/powerpc-32l.c".
        Include "features/rs6000/powerpc-altivec32l.c".
        Include "features/rs6000/powerpc-64l.c".
        Include "features/rs6000/powerpc-altivec64l.c".
        Include "features/rs6000/powerpc-e500l.c".
        (ppc_linux_supply_gregset): New function.
        (ppc_linux_collect_gregset): Handle orig_r3 and trap registers.
        (ppc32_linux_gregset): Use ppc_linux_supply_gregset.
        (ppc64_linux_gregset): Likewise.
        (ppc_linux_sigtramp_cache): Handle orig_r3 and trap registers.
        (ppc_linux_trap_reg_p): New function.
        (ppc_linux_write_pc): New function.
        (ppc_linux_core_read_description): New function.
        (ppc_linux_init_abi): Install ppc_linux_write_pc and
        ppc_linux_core_read_description.  Install orig_r3 and trap
        registers if present in the target description.
        (_initialize_ppc_linux_tdep): Initialize Linux target descriptions.

        * ppc-linux-nat.c: Include "ppc-linux-tdep.h".
        (PT_ORIG_R3, PT_TRAP): Define if necessary.
        (ppc_register_u_addr): Handle orig_r3 and trap registers.
        (fetch_ppc_registers): Likewise.
        (store_ppc_registers): Likewise.
        (store_register): Likewise.
        (ppc_linux_read_description): Check whether AltiVec is supported.
        Check whether inferior is 32-bit or 64-bit.  Return the appropriate
        Linux target description.

        * features/Makefile (WHICH): Use rs6000/powerpc-32l and
        rs6000/powerpc-altivec32l instead of rs6000/powerpc-32.
        Use rs6000/powerpc-64l and rs6000/powerpc-altivec64l instead
        of rs6000/powerpc-64.  Use rs6000/powerpc-e500l instead of
        rs6000/powerpc-e500.  Update -expedite variables accordingly.

        * features/rs6000/power-spe.xml: Use regnum 73 for "acc".
        * features/rs6000/powerpc-32.xml: Do not include power-altivec.xml.
        * features/rs6000/powerpc-64.xml: Do not include power-altivec.xml.
        * features/rs6000/powerpc-e500.c: Regenerate.
        * features/rs6000/powerpc-32.c: Regenerate.
        * features/rs6000/powerpc-64.c: Regenerate.

        * features/rs6000/power-linux.xml: New file.
        * features/rs6000/power64-linux.xml: New file.
        * features/rs6000/powerpc-32l.xml: New file.
        * features/rs6000/powerpc-altivec32l.xml: New file.
        * features/rs6000/powerpc-64l.xml: New file.
        * features/rs6000/powerpc-altivec64l.xml: New file.
        * features/rs6000/powerpc-e500l.xml: New file.
        * features/rs6000/powerpc-32l.c: New (generated) file.
        * features/rs6000/powerpc-altivec32l.c: New (generated) file.
        * features/rs6000/powerpc-64l.c: New (generated) file.
        * features/rs6000/powerpc-altivec64l.c: New (generated) file.
        * features/rs6000/powerpc-e500l.xml: New (generated) file.

        * regformats/reg-ppc.dat: Remove.
        * regformats/reg-ppc64.dat: Remove.
        * regformats/rs6000/powerpc-32.dat: Remove.
        * regformats/rs6000/powerpc-64.dat: Remove.
        * regformats/rs6000/powerpc-e500.dat: Remove.
        * regformats/rs6000/powerpc-32l.dat: New (generated) file.
        * regformats/rs6000/powerpc-altivec32l.dat: New (generated) file.
        * regformats/rs6000/powerpc-64l.dat: New (generated) file.
        * regformats/rs6000/powerpc-altivec64l.dat: New (generated) file.
        * regformats/rs6000/powerpc-e500l.dat: New (generated) file.

2008-05-03  Pedro Alves  <pedro@codesourcery.com>

        * thread.c (delete_thread): Call observer_notify_thread_exit.
        * mi/mi-interp.c (mi_interpreter_init): Register mi_thread_exit as
        thread_exit observer.
        (mi_thread_exit): New.

2008-05-03  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * breakpoint.c (create_exception_catchpoint): Remove prototype
        for already deleted function.
        * breakpoint.h (ep_is_exception_catchpoint): Likewise.
        * frame.h (show_stack_frame): Remove prototype.
        * stack.c (show_stack_frame): Remove empty, unused function.
        * source.c (symtab_to_fullname, print_source_lines): Small fix
        in comment.
        * value.c (show_values): Update comments to mention "show values"
        command instead of "info history".

2008-05-02  Ulrich Weigand  <uweigand@de.ibm.com>

        * linespec.c: Include "target.h".
        (minsym_found): Handle minimal symbols pointing to function
        descriptors.  Use find_function_start_pc.
        * minsyms.c (msymbol_objfile): New function.
        * parse.c (write_exp_msymbol): Handle minimal symbols pointing
        to function descriptors.
        * symtab.c (fixup_section): Only use minimal symbol at the same
        address to determine section of a symbol.
        (find_function_start_pc): New function.
        (find_function_start_sal): Use it.
        * symtab.h (msymbol_objfile): Add prototype.
        (find_function_start_pc): Likewise.
        * value.c: Include "objfiles.h".
        (value_fn_field): Handle minimal symbols pointing to function
        descriptors. 
        * Makefile.in (linespec.o): Update dependencies.
        (value.o): Likewise.

2008-05-02  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (unwrap_value): Handle the case where the "F" field
        inside a PAD type is a bitfield.

2008-05-02  Ulrich Weigand  <uweigand@de.ibm.com>

        * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Handle
        TYPE_CODE_BOOL and TYPE_CODE_CHAR the same as TYPE_CODE_INT.
        Handle TYPE_CODE_REF the same as TYPE_CODE_PTR.
        Handle TYPE_CODE_METHOD the same as TYPE_CODE_FUNC.
        Allow typedefs when checking for function pointer arguments.
        Right-align small structs passed on the stack.
        (ppc64_sysv_abi_return_value): Handle TYPE_CODE_BOOL and
        TYPE_CODE_CHAR the same as TYPE_CODE_INT.
        Handle TYPE_CODE_REF the same as TYPE_CODE_PTR.

2008-05-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (arm-tdep.o): Update.
        * arm-tdep.c (arm_objfile_data_key, struct arm_mapping_symbol)
        (struct arm_per_objfile, arm_compare_mapping_symbols): New.
        (arm_pc_is_thumb): Use mapping symbols.
        (arm_objfile_data_cleanup, arm_record_special_symbol): New.
        (arm_gdbarch_init): Call set_gdbarch_record_special_symbol.
        (_initialize_arm_tdep): Initialize arm_objfile_data_key.
        * elfread.c (elf_symtab_read): Use gdbarch_record_special_symbol.
        * gdbarch.sh: Add record_special_symbol.
        * gdbarch.c, gdbarch.h: Regenerated.
        * objfiles.c (struct objfile_data): Add cleanup member.
        (register_objfile_data_with_cleanup): New function, from
        register_objfile_data.
        (register_objfile_data): Use it.
        (objfile_free_data): Call clear_objfile_data.
        (clear_objfile_data): Call cleanup functions.
        * objfiles.h (register_objfile_data_with_cleanup): Declare.

2008-05-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * objfiles.c (init_entry_point_info): Handle shared libraries.

2008-05-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * arm-tdep.c (arm_prologue_this_id): Compare pc, not func, to
        lowest_pc.

2008-05-02  Jim Blandy  <jimb@codesourcery.com>
            Pedro Alves  <pedro@codesourcery.com>

        Implement displaced stepping.

        * gdbarch.sh (max_insn_length): New 'variable'.
        (displaced_step_copy, displaced_step_fixup)
        (displaced_step_free_closure, displaced_step_location): New
        functions.
        (struct displaced_step_closure): Add forward declaration.
        * gdbarch.c, gdbarch.h: Regenerated.

        * arch-utils.c: #include "objfiles.h".
        (simple_displaced_step_copy_insn)
        (simple_displaced_step_free_closure)
        (displaced_step_at_entry_point): New functions.
        * arch-utils.h (simple_displaced_step_copy_insn)
        (simple_displaced_step_free_closure)
        (displaced_step_at_entry_point): New prototypes.

        * i386-tdep.c (I386_MAX_INSN_LEN): Rename to...
        (I386_MAX_MATCHED_INSN_LEN): ... this.
        (i386_absolute_jmp_p, i386_absolute_call_p)
        (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p)
        (i386_displaced_step_fixup): New functions.
        (struct i386_insn, i386_match_insn): Update.
        (i386_gdbarch_init): Set gdbarch_max_insn_length.
        * i386-tdep.h (I386_MAX_INSN_LEN): New.
        (i386_displaced_step_fixup): New prototype.
        * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h".
        Register gdbarch_displaced_step_copy,
        gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure,
        and gdbarch_displaced_step_location functions.

        * infrun.c (debug_displaced): New variable.
        (show_debug_displaced): New function.
        (struct displaced_step_request): New struct.
        (displaced_step_request_queue, displaced_step_ptid)
        (displaced_step_gdbarch, displaced_step_closure)
        (displaced_step_original, displaced_step_copy)
        (displaced_step_saved_copy, can_use_displaced_stepping): New
        variables.
        (show_can_use_displaced_stepping, use_displaced_stepping)
        (displaced_step_clear, cleanup_displaced_step_closure)
        (displaced_step_dump_bytes, displaced_step_prepare)
        (displaced_step_clear_cleanup, write_memory_ptid)
        (displaced_step_fixup): New functions.
        (resume): Call displaced_step_prepare.
        (proceed): Call read_pc once, and remember the value.  If using
        displaced stepping, don't remove breakpoints.
        (handle_inferior_event): Call displaced_step_fixup.  Add some
        debugging output.  When we try to step over a breakpoint, but get
        a signal to deliver to the thread instead, ensure the step-resume
        breakpoint is actually inserted.  If a thread hop is needed, and
        displaced stepping is enabled, don't remove breakpoints.
        (init_wait_for_inferior): Call displaced_step_clear.
        (_initialize_infrun): Add "set debug displaced" command.  Add
        "maint set can-use-displaced-stepping" command.  Clear
        displaced_step_ptid.
        * inferior.h (debug_displaced): Declare variable.
        (displaced_step_dump_bytes): Declare function.

        * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update
        dependencies.

2008-05-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * arm-tdep.c (arm_mode_strings, arm_fallback_mode_string)
        (arm_force_mode_string, arm_show_fallback_mode)
        (arm_show_force_mode): New.
        (arm_pc_is_thumb): Honor fallback-mode and force-mode.  Use
        arm_frame_is_thumb.
        (_initialize_arm_tdep): Add "set arm fallback-mode"
        and "set arm force-mode".
        * NEWS: Document new commands.

2008-05-02  Andrew Stubbs  <andrew.stubbs@st.com>

        * main.h (batch_silent): Declare.
        * event-top.c: Include main.h.
        (gdb_setup_readline): Remove extern batch_silent declaration.
        * infrun.c (normal_stop): Don't print source location when running in
        --batch-silent mode.
        * Makefile.in (event-top.o): Add main.h dependency.

2008-05-02  Andreas Schwab  <schwab@suse.de>

        * target.h (struct target_ops): Add
        to_watchpoint_addr_within_range.
        (target_watchpoint_addr_within_range): New function.
        * target.c (update_current_target): Inherit
        to_watchpoint_addr_within_range, defaulting to
        default_watchpoint_addr_within_range.
        (default_watchpoint_addr_within_range): New function.
        (debug_to_watchpoint_addr_within_range): New function.
        (setup_target_debug): Set to_watchpoint_addr_within_range.
        * ppc-linux-nat.c (ppc_linux_watchpoint_addr_within_range):
        New function.
        (_initialize_ppc_linux_nat): Set to_watchpoint_addr_within_range.
        * breakpoint.c (watchpoints_triggered): Use
        target_watchpoint_addr_within_range.

2008-05-01  Pedro Alves  <pedro@codesourcery.com>

        * configure.tgt: Add i[34567]86-*-dicos* and x86_64-*-dicos*.
        (i[34567]86-*-dicos*, x86_64-*-dicos*):
        Set gdb_osabi to GDB_OSABI_DICOS.

        * defs.h (enum gdb_osabi): Add GDB_OSABI_DICOS.
        * osabi.c (gdb_osabi_name): Add "DICOS".

        * i386-dicos-tdep.c: New file.

        * Makefile.in (ALL_TARGET_OBS): Add i386-dicos-tdep.o.
        (ALLDEPFILES): Add i386-dicos-tdep.c.
        (i386-dicos-tdep.o): New rule.

2008-05-01  Pedro Alves  <pedro@codesourcery.com>

        * linux-nat.c (linux_nat_switch_fork): Reinit GDB's thread list
        and register the fork's PTID as a thread.

2008-05-01  Aleksandar Ristovski  <aristovski@qnx.com>

        PR gdb/1665
        * breakpoint.c (create_breakpoint): Add breakpoint_ops argument and
        assign its value to the breakpoint created.
        (create_breakpoints): Add breakpoint_ops argument and pass it
        to create_breakpoint call.
        (break_command_really): Add breakpoint_ops argument and pass/assign
        appropriately.
        (break_command_1): Pass NULL as ops argument.
        (set_breakpoint): Pass NULL as ops argument.
        (print_one_exception_catchpoint): Print <PENDING> if no loc available.
        (handle_gnu_v3_exceptions): Call generic breakpoint code to insert
        catch and throw catchpoints.

2008-05-01  Aleksandar Ristovski  <aristovski@qnx.com>

        PR gdb/2343
        * corelow.c (core_open): Use gdbarch_target_signal_from_host to
        translate signal numeric value from the target to GDB's enum
        target_signal.
        * gdbarch.c, gdbarch.h: Regenerated.
        * gdbarch.sh: Added two new functions target_signal_from_host and
        target_signal_to_host.
        * target.h (default_target_signal_from_host, 
        default_target_signal_to_host): New functions - declarations.
        * signals/signals.c (struct gdbarch): New declaration.
        (default_target_signal_to_host, default_target_signal_from_host): New
        functions.

2008-05-01  Daniel Jacobowitz  <dan@codesourcery.com>

        * arm-linux-tdep.h (ARM_CPSR_REGNUM): Delete definition.
        * arm-tdep.c (arm_frame_is_thumb): New.
        (arm_pc_is_thumb): Clarify comment.
        (thumb_analyze_prologue): Remove PC special case.
        (thumb_scan_prologue): Take a block_addr argument.  Use it for
        find_pc_partial_function.  Remove unused variables.
        (arm_scan_prologue): Use arm_frame_is_thumb.  Use the block address
        for find_pc_partial_function.  Remove PC special case.
        (arm_prologue_prev_register): Add special handling for PC and CPSR.
        (arm_dwarf2_prev_register, arm_dwarf2_frame_init_reg): New.
        (arm_get_next_pc): Use arm_frame_is_thumb.
        (arm_write_pc): Use CPSR_T instead of 0x20.
        (arm_gdbarch_init): Call dwarf2_frame_set_init_reg.
        * arm-tdep.h (enum gdb_regnum): Add ARM_CPSR_REGNUM.
        (CPSR_T): Define.
        * dwarf2-frame.c (dwarf2_frame_prev_register): Handle
        DWARF2_FRAME_REG_FN.
        * dwarf2-frame.h (enum dwarf2_frame_reg_rule): Add
        DWARF2_FRAME_REG_FN.
        (struct dwarf2_frame_state_reg): Add FN to loc union.

2008-05-01  Nick Roberts  <nickrob@snap.net.nz>

        * exec.c (print_section_info): Add missing '\n'.

2008-05-01  Vladimir Prus  <vladimir@codesourcery.com>

        * thread.c (add_thread): Move observer call to ...
        (add_thread_silent): ... here.

2008-04-30  Ulrich Weigand  <uweigand@de.ibm.com>

        * rs6000-tdep.c: Update for unwinder changes.
        * ppcobsd-tdep.c: Likewise.

2008-04-30  Ulrich Weigand  <uweigand@de.ibm.com>

        * s390-tdep.c: Update for unwinder changes.

2008-04-30  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-tdep.c: Update for unwinder changes.

2008-04-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * hppanbsd-tdep.c, m68kbsd-tdep.c, mn10300-linux-tdep.c,
        ppc-linux-tdep.c, ppcnbsd-tdep.c, sparc-linux-tdep.c,
        sparc64-linux-tdep.c: Update for unwinder changes.

2008-04-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * mipsnbsd-tdep.c, mips64obsd-tdep.c, mips-linux-tdep.c: Update
        for unwinder changes.
        * mips-tdep.c: Likewise.
        (mips_stub_frame_cache): Unwind the ABI stack pointer, not the
        raw one.

2008-04-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * arm-linux-tdep.c, arm-tdep.c, armobsd-tdep.c: Update for
        unwinder changes.

2008-04-30  Daniel Jacobowitz  <dan@codesourcery.com>

        Update i386 and amd64 ports for unwinder changes.

        * amd64-tdep.c (amd64_frame_cache): Expect this_frame.
        (amd64_frame_this_id, amd64_frame_prev_register): Update signature.
        (amd64_frame_unwind): Use default_frame_sniffer.
        (amd64_frame_sniffer): Delete.
        (amd64_sigtramp_frame_cache): Expect this_frame.
        (amd64_sigtramp_frame_this_id, amd64_sigtramp_frame_prev_register)
        (amd64_sigtramp_frame_sniffer): Update signature.
        (amd64_sigtramp_frame_unwind): Add amd64_sigtramp_frame_sniffer.
        (amd64_frame_base_address): Expect this_frame.
        (amd64_dummy_id): Renamed from amd64_unwind_dummy_id.  Expect
        this_frame.
        (amd64_init_abi): Use set_gdbarch_dummy_id and
        frame_unwind_append_unwinder.
        * i386-tdep.c (i386_frame_cache): Expect this_frame.
        (i386_frame_this_id, i386_frame_prev_register): Update signature.
        (i386_frame_unwind): Use default_frame_sniffer.
        (i386_frame_sniffer): Delete.
        (i386_sigtramp_frame_cache): Expect this_frame.
        (i386_sigtramp_frame_this_id, i386_sigtramp_frame_prev_register)
        (i386_sigtramp_frame_sniffer): Update signature.
        (i386_sigtramp_frame_unwind): Use i386_sigtramp_frame_sniffer.
        (i386_frame_base_address): Update signature.
        (i386_dummy_id): Rename from i386_unwind_dummy_id.  Expect this_frame.
        (i386_push_dummy_call): Update comment.
        (i386_sigtramp_p, i386_svr4_sigtramp_p, i386_svr4_sigcontext_addr):
        Expect this_frame.
        (i386_gdbarch_init): Use set_gdbarch_dummy_id, dwarf2_append_unwinders,
        and frame_unwind_append_unwinder.
        * amd64-linux-tdep.c, amd64-sol2-tdep.c, amd64fbsd-tdep.c,
        amd64nbsd-tdep.c, amd64obsd-tdep.c, i386-linux-tdep.c,
        i386-nto-tdep.c, i386bsd-tdep.c, i386-sol2-tdep.c, i386obsd-tdep.c,
        i386nbsd-tdep.c: Update for unwinder changes.

2008-04-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * trad-frame.c (struct trad_frame_cache): Rename next_frame to this_frame.
        (trad_frame_cache_zalloc, trad_frame_alloc_saved_regs): Expect
        this_frame.
        (trad_frame_get_prev_register, trad_frame_get_register): Update signature.
        * trad-frame.h (trad_frame_cache_zalloc, trad_frame_get_register)
        (trad_frame_alloc_saved_regs, trad_frame_get_prev_register): Update
        signature.
        * tramp-frame.c (tramp_frame_cache, tramp_frame_start): Expect
        this_frame.
        (tramp_frame_this_id, tramp_frame_prev_register, tramp_frame_sniffer):
        Update signature.
        * tramp-frame.h (struct tramp_frame): Update signature of init.
        * Makefile.in (trad-frame.o): Update.

2008-04-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2-frame.c (read_reg): Expect this_frame in the baton.
        (execute_stack_op): Put this_frame in the baton.
        (execute_cfa_program): Take this_frame.
        (struct dwarf2_frame_ops): Update comment for signal_frame_p.
        (dwarf2_frame_default_init_reg, dwarf2_frame_init_reg)
        (dwarf2_frame_signal_frame_p, dwarf2_frame_cache)
        (dwarf2_frame_this_id): Adjust to work on this_frame.
        (dwarf2_signal_frame_this_id): Delete.
        (dwarf2_frame_prev_register): Update signature.  Use new frame
        unwind methods.
        (dwarf2_frame_sniffer): Update signature.  Expect this_frame.
        (dwarf2_frame_unwind, dwarf2_signal_frame_unwind): Add
        dwarf2_frame_sniffer.
        (dwarf2_append_unwinders): New.
        (dwarf2_frame_base_address, dwarf2_frame_base_sniffer): Expect
        this_frame.
        * sparc-tdep.c (sparc32_dwarf2_struct_return_p)
        (sparc32_dwarf2_frame_init_reg): Expect this_frame.
        * cris-tdep.c (cris_dwarf2_frame_init_reg): Likewise.
        * rs6000-tdep.c (ppc_dwarf2_frame_init_reg): Likewise.
        * s390-tdep.c (s390_dwarf2_frame_init_reg): Likewise.
        * sh-tdep.c (sh_dwarf2_frame_init_reg): Likewise.
        * sparc64-tdep.c (sparc64_dwarf2_frame_init_reg): Likewise.
        * dwarf2-frame.h (dwarf2_frame_sniffer): Delete declaration.
        (dwarf2_append_unwinders): Declare.
        (dwarf2_frame_base_sniffer): Update declaration.
        * i386-linux-tdep.c (i386_linux_dwarf_signal_frame_p): Expect
        this_frame.

2008-04-30  Daniel Jacobowitz  <dan@codesourcery.com>

        Convert frame unwinders to use the current frame and
        "struct value".

        * frame.c (frame_debug): Make global.
        (get_frame_id): Pass this frame to unwinder routines.
        (frame_pc_unwind): Remove unused unwind->prev_pc support.
        (do_frame_register_read): Do not discard the return value of
        frame_register_read.
        (frame_register_unwind): Remove debug messages.  Use
        frame_unwind_register_value.
        (frame_unwind_register_value, get_frame_register_value): New
        functions.
        (create_new_frame, get_frame_base_address, get_frame_locals_address)
        (get_frame_args_address, get_frame_type): Pass this frame to
        unwinder routines.
        (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New
        functions.
        * frame.h: Update comments.
        (frame_debug, frame_unwind_register_value, get_frame_register_value)
        (frame_prepare_for_sniffer): Declare.
        * frame-unwind.h: Update comments and parameter names.
        (default_frame_sniffer): Declare.
        (frame_prev_register_ftype): Return a struct value *.
        (struct frame_unwind): Remove prev_pc member.
        (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete.
        (frame_unwind_append_unwinder, frame_unwind_got_optimized)
        (frame_unwind_got_register, frame_unwind_got_memory)
        (frame_unwind_got_constant, frame_unwind_got_address): Declare.
        * frame-base.h: Update comments and parameter names.
        * valops.c (value_fetch_lazy): Use get_frame_register_value.  Iterate
        if necessary.  Add debugging output.
        * sentinel-frame.c (sentinel_frame_prev_register)
        (sentinel_frame_this_id): Update for new signature.
        (sentinel_frame_prev_pc): Delete.
        (sentinel_frame_unwinder): Remove prev_pc.
        * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize
        prev_pc.
        * libunwind-frame.c (libunwind_frame_unwind): Likewise.
        * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer.
        (frame_unwind_append_sniffer): Delete.
        (frame_unwind_append_unwinder): New function.
        (frame_unwind_find_by_frame): Take this frame.  Only use sniffers
        from unwinders.  Use frame_prepare_for_sniffer.
        (default_frame_sniffer, frame_unwind_got_optimized)
        (frame_unwind_got_register, frame_unwind_got_memory)
        (frame_unwind_got_constant, frame_unwind_got_address): New functions.
        * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id.
        (dummy_frame_prev_register, dummy_frame_this_id): Update for new
        signature.
        * gdbarch.sh: Replace unwind_dummy_id with dummy_id.
        * gdbarch.c, gdbarch.c: Regenerated.
        * frame-base.c (default_frame_base_address)
        (default_frame_locals_address, default_frame_args_address): Update
        for new signature.
        (frame_base_find_by_frame): Pass this frame to unwinder routines.
        * infcall.c (call_function_by_hand): Update comments.
        * Makefile.in (frame-unwind.o): Update dependencies.

2008-04-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * ada-lang.c (ada_value_primitive_packed_val): Only check
        value_lazy for memory lvals.
        * findvar.c (value_of_register_lazy): New function.
        (locate_var_value): Only check value_lazy for memory lvals.
        * valarith.c (value_subscripted_rvalue): Likewise.
        * valops.c (value_fetch_lazy): Handle both memory and register
        lvals.
        (search_struct_field, value_slice): Only check value_lazy for memory
        lvals.
        * value.c (struct value): Update comment for lazy.
        (value_primitive_field): Only check value_lazy for memory lvals.
        * value.h (value_lazy): Update comment.
        (value_of_register_lazy): Declare.

2008-04-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * corefile.c (reopen_exec_file): Close any open files.

2008-04-29  Joel Brobecker  <brobecker@adacore.com>

        * ia64-tdep.c (ia64_memory_remove_breakpoint): Set
        show_memory_breakpoints to 1 while reading the instruction bundle.

2008-04-29  Joel Brobecker  <brobecker@adacore.com>

        * gdbarch.sh: Document the return_value method. Explain that
        the FUNCTYPE parameter might be NULL.
        * gdbarch.h: Regenerated.
        * sparc-tdep.c (sparc32_push_dummy_code): Do not pass the function
        type when calling using_struct_return, as this is unnecessary
        on this target.

2008-04-28  Joel Brobecker  <brobecker@adacore.com>

        * terminal.h (create_tty_session): Fix return type.

2008-04-26  Vladimir Prus  <vladimir@codesourcery.com>

        * mi/mi-interp.c (mi_new_thread): Quote the thread id.

2008-04-26  Joel Brobecker  <brobecker@adacore.com>

        * breakpoint.c (condition_command, commands_from_control_command)
        (break_command_really): Minor reformatting.

2008-04-25  Pedro Alves  <pedro@codesourcery.com>

        * dwarf2read.c (dwarf2_const_value): Handle DW_FORM_strp.

2008-04-25  Pedro Alves  <pedro@codesourcery.com>

        * amd64-tdep.c (amd64_get_longjmp_target): New.
        (amd64_init_abi): Register amd64_get_longjmp_target as
        gdbarch_get_longjmp_target callback.
        * i386-tdep.c (i386_get_longjmp_target): Remove 64-bit handling.

2008-04-25  Pedro Alves  <pedro@codesourcery.com>

        * breakpoint.h (enum bpstat_what_main_action): Delete
        BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE.

        * breakpoint.c (clrs): Delete.
        (bpstat_what): Update table.

        * infrun.c (handle_inferior_event): Remove
        BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE handling.

2008-04-24  Vladimir Prus  <vladimir@codesourcery.com>

        * mi/mi-cmds.h (mi_cmd_args_ftype): Remove.
        Adjust all prototypes using mi_cmd_args_ftype to use
        mi_cmd_argv_ftype.
        (struct mi_cmd): Remove the args_func field.
        * mi/mi-cmds.c: Don't provide value for the args_func field.
        * mi/mi-main.c (mi_execute_async_cli_command)
        (mi_cmd_exec_run, mi_cmd_exec_next, mi_cmd_exec_next_instruction)
        (mi_cmd_exec_step, mi_cmd_exec_step_instruction)
        (mi_cmd_exec_finish, mi_cmd_exec_until, mi_cmd_exec_return)
        (mi_cmd_exec_continue, mi_cmd_exec_interrupt)
        (mi_cmd_target_download): Adjust.
        (mi_cmd_target_select): Adjust. Pass 0 for from_tty parameter.
        (mi_cmd_execute): Do not check for args_func.
        (mi_execute_async_cli_command): Adjust.
        * mi/mi-parse.c: Don't check for args_func.

2008-04-24  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (bpstat_check_location)
        (bpstat_check_watchpoint, bpstat_check_breakpoint_conditions):
        New, extracted from bpstat_stop_status.
        (bpstat_stop_status): Use the above.

2008-04-24  Vladimir Prus  <vladimir@codesourcery.com>

        * mi/mi-main.c (last_async_command): Rename to current_token.
        (previous_async_command): Remove.
        (mi_cmd_gdb_exit): Adjust.
        (mi_cmd_exec_interrupt): Don't dance with previous_async_command.
        (mi_cmd_target_select): Adjust.
        (mi_cmd_execute): Don't set previous_async_command.  Free token
        here even in async mode.
        (mi_execute_async_cli_command): Adjust.
        (mi_exec_async_cli_cmd_continuation): Adjust.  Do not free the
        token.
        (mi_load_progress): Adjust.

2008-04-24  Vladimir Prus  <vladimir@codesourcery.com>

        * infcmd.c (step_1_continuation): Always disable longjmp
        breakpoint if we're not going to do another step.

2008-04-24  Vladimir Prus  <vladimir@codesourcery.com>

        exec_cleanup murder.
        * breakpoint.c (until_break_command_continuation): Add
        the 'error' parameter.  Directly delete the breakoint as
        opposed to running cleanups.
        (until_break_command): Install continuation only
        after starting the target.  Don't use exec cleanups,
        use ordinary cleanups.  Discard cleanups is successfully
        started the target in async mode.
        (make_cleanup_delete_breakpoint): Remove.
        * breakpoint.h (make_cleanup_delete_breakpoint): Remove
        declaration.
        * defs.h (do_exec_cleanups, make_exec_cleanup): Remove
        declarations.
        (struct continations): Add the 'error' parameter to the
        continuation_hook field.
        (add_continuation, do_all_continuations)
        (add_intermediate_continuation)
        (do_all_intermediate_continuations): Add the 'error' parameter.
        * exceptions.c (throw_exception): Don't call do_exec_cleanups.
        * inf-loop.c (inferior_event_handler): Instead of calling
        discard_all_continuations, use do_all_continuations with 1 as
        'error' parameter.  Pass 0 as 'error' parameter in existing uses
        of discard_all_continuations.
        * infcmd.c (step_1): Do not use exec cleanup.  For async case, discard
        cleanups.
        (step_once): Install continuation only after resuming the target.
        (step_1_continuation): Disable longjmp breakpoint on error.
        (finish_command_continuation): Add the error parameter.  Delete
        the finish breakpoint directly, do not use cleanups.
        (finish_command): Do not use exec_cleanups. Always setup
        continuation.  For sync case, immediately run them.
        (attach_command_continuation): Add the error parameter.
        * infrun.c (fetch_inferior_event): Do not use exec cleanups to
        remove step_resume_breakpoint -- adjust delete it directly.
        * interps.c (interp_set): Adjust call to do_all_continations.
        * mi/mi-interp.c (mi_interpreter_exec_continuation): Do not
        do exec cleanups.
        * mi/mi-main.c (mi_cmd_target_select): Do not do exec
        cleanups.
        (mi_cmd_execute): Do not use exec_cleanup.
        (mi_execute_async_cli_command): Simplify the string concatenation
        logic.  Do no use exec cleanup.
        (mi_exec_async_cli_cmd_continuation): New parameter error.
        Free last_async_command.
        * top.c (command_line_handler_continuation): New parameter error.
        * utils.c (exec_cleanup_chain, make_exec_cleanup)
        (do_exec_cleanups): Remove.
        (add_continuation, do_all_continations)
        (add_intermediate_continuation)
        (do_all_intermediate_continuations): New parameter error.

2008-04-24  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.h (bp_location_p): New typedef.
        Register a vector of bp_location_p.
        * breakpoint.c (always_inserted_mode)
        (show_always_inserted_mode): New.
        (unlink_locations_from_global_list): Remove.
        (update_global_location_list)
        (update_global_location_list_nothrow): New.
        (update_watchpoint): Don't free locations.
        (should_insert_location): New.
        (insert_bp_location): Use should_insert_location.
        (insert_breakpoint_locations): Copied from
        insert_breakpoints.
        (insert_breakpoint): Use insert_breakpoint_locations.
        (bpstat_stop_status): Call update_global_location_list
        when disabling breakpoint.
        (allocate_bp_location): Don't add to bp_location_chain.
        (set_raw_breakpoint)
        (create_longjmp_breakpoint, enable_longjmp_breakpoint)
        (disable_longjmp_breakpoint, create_overlay_event_breakpoint)
        (enable_overlay_breakpoints, disable_overlay_breakpoints)
        (set_longjmp_resume_breakpoint)
        (enable_watchpoints_after_interactive_call_stop)
        (disable_watchpoints_before_interactive_call_start)
        (create_internal_breakpoint)
        (create_fork_vfork_event_catchpoint)
        (create_exec_event_catchpoint, set_momentary_breakpoint)
        (create_breakpoints, break_command_1, watch_command_1)
        (create_exception_catchpoint)
        (handle_gnu_v3_exceptions)
        (disable_breakpoint, breakpoint_re_set_one)
        (create_thread_event_breakpoint, create_solib_event_breakpoint)
        (create_ada_exception_breakpoint): : Don't call check_duplicates.
        Call update_global_location_list.
        (delete_breakpoint): Don't remove locations and don't
        try to reinsert them. Call update_global_location_list.
        (update_breakpoint_locations): Likewise.
        (restore_always_inserted_mode): New.
        (update_breakpoints_after_exec): Temporary disable
        always inserted mode.
        * Makefile.in: Update dependencies.

        * infrun.c (proceed): Remove breakpoints while stepping
        over breakpoint.
        (handle_inferior_event): Don't remove or insert
        breakpoints.
        * linux-fork.c (checkpoint_command): Remove breakpoints
        before fork and insert after.
        (linux_fork_context): Remove breakpoints before switch
        and insert after.
        * target.c (target_disconnect, target_detach): Remove
        breakpoints from target.

        
2008-04-24  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (print_one_breakpoint_location): In MI
        mode, report the location string the breakpoint was
        originally created with.

2008-04-23  Maxim Grigoriev  <maxim2405@gmail.com>

        * Makefile.in (xtensa-tdep.o): Update dependencies.
        * configure.tgt (xtensa*): Update dependencies.
        * xtensa-tdep.c (arreg_number): Renamed from areg_number.
        Local variable areg renamed to arreg.
        (areg_number): New function.
        (xtensa_pseudo_register_read, xtensa_pseudo_register_write)
        (xtensa_extract_return_value, xtensa_store_return_value): areg_number
        replaced by arreg_number.
        (xtensa_windowed_frame_cache, struct xtensa_frame_cache): New comments.
        (xtensa_alloc_frame_cache): Initialize cache->wd.ws.
        (xtensa_scan_prologue): New function.
        (xtensa_frame_cache): New local fp_regnum. Handle separately the case,
        when ENTRY instraction hasn't been executed yet. Get the frame pointer
        value based on prologue analysis. Fix the bugs preventing WS and
        AR4-AR7/A11 registers from getting right values for intermediate frames,
        whose registers have been already spilled.
        (xtensa_frame_prev_register): Fix WS register value. Use are_number
        and arreg_number appropriately.
        (xtensa_gdbarch_init): Set solib_svr4_fetch_link_map_offsets to
        svr4_ilp32_fetch_link_map_offsets.

2008-04-23  Andrew Stubbs  <andrew.stubbs@st.com>

        * printcmd.c: Define USE_PRINTF_I64 and PRINTF_HAS_LONG_LONG on MinGW.
        (printf_command): Convert %lld to %I64d when USE_PRINTF_I64 set.

2008-04-23  Paolo Bonzini  <bonzini@gnu.org>

        * acinclude.m4: Add override.m4.
        * configure: Regenerate.

2008-04-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * ada-lang.c (get_selections): Variable PROMPT made non-const and
        initialized with a trailing space now.  Use PROMPT_ARG of
        COMMAND_LINE_INPUT instead of printing it ourselves.

2008-04-22  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Document support for 64-bit core file.

2008-04-22  Corinna Vinschen  <vinschen@redhat.com>

        * NEWS: Add information on calling convention and new SH CLI options.

        * sh-tdep.c (sh_cc_gcc): New static string.
        (sh_cc_renesas): Ditto.
        (sh_cc_enum): New static string array.
        (sh_active_calling_convention): New static string pointer denoting
        active user chosen ABI.
        (sh_is_renesas_calling_convention): New function to return function
        specific ABI, or user choice if necessary.
        (sh_use_struct_convention): Rename first argument and turn around its
        meaning.  Check for renesas ABI and return accordingly.
        (sh_use_struct_convention_nofpu): New function.
        (sh_next_flt_argreg): Get function type as third parameter.  Check
        for renesas ABI and choose floating registers accordingly.
        (sh_push_dummy_call_fpu): Check for ABI and choose argument slot and
        struct return slot accordingly.
        (sh_push_dummy_call_nofpu): Ditto.
        (sh_return_value_nofpu): Call sh_use_struct_convention_nofpu from here.
        Evaluate ABI and give to sh_use_struct_convention_nofpu.
        (sh_return_value_fpu):  Evaluate ABI and give to
        sh_use_struct_convention.
        (show_sh_command): New function.
        (set_sh_command): Ditto.
        (_initialize_sh_tdep): Initialize `set/show sh calling-convention
        CLI command.

        * gdbarch.sh (return_value): Add func_type argument.
        * gdbarch.c: Regenerate.
        * gdbarch.h: Ditto.
        * eval.c (evaluate_subexp_standard): Rename local variable value_type to
        val_type so as not to collide with value_type function.  Call
        using_struct_return with additional function type argument.
        * infcall.c (call_function_by_hand): Call using_struct_return and
        gdbarch_return_value with additional function type argument.
        * infcmd.c (print_return_value): Take addition func_type argument.
        Call gdbarch_return_value with additional function type argument.
        (finish_command_continuation): Call print_return_value with additional
        function type argument.
        (finish_command): Ditto.
        * sparc-tdep.c (sparc32_push_dummy_code): Call using_struct_return with
        additional function type argument.
        * stack.c (return_command): Call using_struct_return and
        gdbarch_return_value with additional function type argument.
        * value.c (using_struct_return): Take additional function type argument.
        * value.h (using_struct_return): Accommodate declaration.
        * alpha-tdep.c (alpha_return_value): Add func_type argument.
        * amd64-tdep.c (amd64_return_value): Ditto.
        * arm-tdep.c (arm_return_value): Ditto.
        * avr-tdep.c (avr_return_value): Ditto.
        * cris-tdep.c (cris_return_value): Ditto.
        * frv-tdep.c (frv_return_value): Ditto.
        * h8300-tdep.c (h8300_return_value): Ditto.
        (h8300h_return_value): Ditto.
        * hppa-tdep.c (hppa32_return_value): Ditto.
        (hppa64_return_value): Ditto.
        * i386-tdep.c (i386_return_value): Ditto.
        * ia64-tdep.c (ia64_return_value): Ditto.
        * iq2000-tdep.c (iq2000_return_value): Ditto.
        * m32c-tdep.c (m32c_return_value): Ditto.
        * m32r-tdep.c (m32r_return_value): Ditto.
        * m68hc11-tdep.c (m68hc11_return_value): Ditto.
        * m68k-tdep.c (m68k_return_value): Ditto.
        (m68k_svr4_return_value): Ditto.
        * m88k-tdep.c  (m88k_return_value): Ditto.
        * mep-tdep.c (mep_return_value): Ditto.
        * mips-tdep.c (mips_eabi_return_value): Ditto.
        (mips_n32n64_return_value): Ditto.
        (mips_o32_return_value): Ditto.
        (mips_o64_return_value): Ditto.
        * mn10300-tdep.c (mn10300_return_value): Ditto.
        * mt-tdep.c (mt_return_value): Ditto.
        * ppc-linux-tdep.c (ppc_linux_return_value): Ditto.
        * ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Ditto.
        (ppc_sysv_abi_broken_return_value): Ditto.
        (ppc64_sysv_abi_return_value): Ditto.
        * ppc-tdep.h (ppc_sysv_abi_return_value): Ditto.
        (ppc_sysv_abi_broken_return_value): Ditto.
        (ppc64_sysv_abi_return_value): Ditto.
        * ppcnbsd-tdep.c (ppcnbsd_return_value): Ditto.
        * rs6000-tdep.c (rs6000_return_value): Ditto.
        * s390-tdep.c (s390_return_value): Ditto.
        * score-tdep.c (score_return_value): Ditto.
        * sh-tdep.c (sh_return_value_nofpu): Ditto.
        (sh_return_value_fpu): Ditto.
        * sh64-tdep.c (sh64_return_value): Ditto.
        * sparc-tdep.c (sparc32_return_value): Ditto.
        * sparc64-tdep.c (sparc64_return_value): Ditto.
        * spu-tdep.c (spu_return_value): Ditto.
        * v850-tdep.c (v850_return_value): Ditto.
        * vax-tdep.c (vax_return_value): Ditto.
        * xstormy16-tdep.c (xstormy16_return_value): Ditto.
        * xtensa-tdep.c (xtensa_return_value): Ditto.

        * gdbtypes.h (struct type): Add calling_convention member.
        * dwarf2read.c (read_subroutine_type): Add calling convention read
        from DW_AT_calling_convention attribute to function type.

2008-04-22  Markus Deuling  <deuling@de.ibm.com>

        * eval.c (evaluate_subexp_standard): Use value_subscripted_rvalue for
        multi_f77_subscript to support values from registers.
        * valarith.c (value_subscripted_rvalue): Remove prototype and static.
        * value.h (value_subscripted_rvalue): Add prototype.

        * f-typeprint.c (f_type_print_base): Add support for TYPE_CODE_UNION.
        Fix output.
        * f-valprint.c (f_val_print): Likewise.

2008-04-21  Craig Silverstein  <csilvers@google.com>

        * dwarf2read.c (zlib_decompress_section): Define abfd in the
        !HAVE_ZLIB_H case.

2008-04-21  Pedro Alves  <pedro@codesourcery.com>

        * symfile.c (syms_from_objfile): Don't warn if lowest loadable
        section is not a code section.

2008-04-19  Craig Silverstein  <csilvers@google.com>

        * NEWS: Add information on compressed debug sections.

2008-04-19  Vladimir Prus  <vladimir@codesourcery.com>

        * mi/mi-cmd-var.c (varobj_update_one): Print new
        value for variable objects that changed type.

2008-04-19  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.c (varobj_invalidate): Don't touch floating
        varobjs.

2008-04-19  Mark Kettenis  <kettenis@gnu.org>

        * symtab.c: (multiple_symbols_modes, multiple_symbols_ask)
        (multiple_symbols_cancel): Remove extra const.
        * symtab.h: Likewise.

2008-04-19  Nick Roberts  <nickrob@snap.net.nz>

        * interps.c (top_level_interpreter): Rename static variable...
        (top_level_interpreter_ptr): ...to this.
        (top_level_interpreter): New function.

        * interps.h: New extern for top_level_interpreter.

        * linespec.c: Include interps.h and mi/mi-cmds.h.
        (decode_line_2): When using MI, always set all breakpoints in menu.

        * Makefile.in (linespec.o, mi-interp.o): Add dependencies.

2008-04-18  Craig Silverstein  <csilvers@google.com>

        * configure.ac (AC_SEARCH_LIBS): Add check for zlib.
        * config.in, configure: Regenerate.
        * dwarf2read.c: Include zlib.h if present.
        Modified *_SECTION macros.
        (section_is_p): New.
        (dwarf2_locate_sections): Use section_is_p instead of strcmp
        (dwarf2_resize_section): New.
        to determine whether a given section has a given name.
        (zlib_decompress_section): New.
        (dwarf2_read_section): Read the compressed section if present
        in the binary.
        * MAINTAINERS: Added myself to section Write After Approval.

2008-04-18  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * defs.h (exec_set_section_offsets): Remove prototype.
        * exec.c (exec_set_section_offsets): Remove function.

2008-04-18  Joel Brobecker  <brobecker@adacore.com>

        * stabsread.c (cleanup_undefined_types_1): Add instance flags check
        in the search for the matching symbol.

2008-04-17  Marc Khouzam  <marc.khouzam@ericsson.com>

        * breakpoint.c (update_watchpoint): Always reparse
        condition.

2008-04-17  Joel Brobecker  <brobecker@adacore.com>

        * breakpoint.c (print_one_breakpoint_location): Make sure to print
        the breakpoint address only once.

2008-04-17  Dennis Roberts  <dennis.roberts@sunquestinfo.com>

        * rs6000-tdep.c (rs6000_gdbarch_init): Use the BFD architecture,
        rather than a hard-coded architecture, for xcoff executables.

2008-04-17  Doug Evans  <dje@google.com>

        * buildsym.c (watch_main_source_file_lossage): New fn.
        (end_symtab): Call it.

        * source.c (find_and_open_source): Add some comments clarifying
        handling of FULLNAME argument.  Make static.  Remove pointless
        xstrdup/xfree.

2008-04-17  Pedro Alves  <pedro@codesourcery.com>

        * inf-loop.c (inferior_event_handler): Also run the intermediate
        continuations in the INF_EXEC_COMPLETE case.

2008-04-16  Tom Tromey  <tromey@redhat.com>

        * cli/cli-decode.h (CMD_ASYNC_OK): New define.
        (set_cmd_async_ok, get_cmd_async_ok): Declare.
        * cli/cli-decode.c (set_cmd_async_ok): New function.
        (get_cmd_async_ok): New function.
        * cli/cli-cmds.c (init_cli_cmds): Mark "pwd", "help", "info", and
        "show" as async-ok.
        * top.c (execute_command): Use get_cmd_async_ok.
        * infcmd.c: Include cli/cli-decode.h.
        (_initialize_infcmd): Mark "interrupt" as async-ok.
        * Makefile.in (infcmd.o): Depend on cli_decode_h.

2008-04-16  Daniel Jacobowitz  <dan@codesourcery.com>

        PR gdb/2445
        * exec.c: Correct "arch-utils.h" include.

2008-04-15  Aleksandar Ristovski  <aristovski@qnx.com>

        PR gdb/2424
        * infrun.c (normal_stop) Move breakpoint_auto_delete further down
        to allow printing to 'see' real reason of stop. This fixes PR 2424.
        * breakpoint.c (bpdisp_texst): New function. The function takes over
        the role of bpstats static array in print_one_breakpoint_location.
        (print_it_typical): Print "Temporary breakpoint" instead
        of just "Breakpoint" when breakpoint is, well, temporary. For mi-like
        protocols, print disp field.
        (print_one_breakpoint_location): Removed bpdisps static definition.
        Call new bpstat_text function to get value for 'disp' field.
        (mention): Print "Temporary breakpoint" instead of just "Breakpoint".

2008-04-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * gnulib/Makefile.am, gnulib/m4/gnulib-cache.m4,
        gnulib/aux/link-warning.h, gnulib/extra/link-warning.h: Adjust
        by rerunning gnulib-tool with --aux-dir=gnulib/extra.
        * gnulib/Makefile.in: Regenerate.

2008-04-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (GNULIB_H): New.  Trigger all-lib.
        (defs_h): Use $(GNULIB_H).
        (all-lib): Depend on gnulib/Makefile.
        (gnulib/Makefile): Regenerate gnulib/Makefile and gnulib/.deps.
        * config.in, gnulib/Makefile.in: Regenerated.

2008-04-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (LIBGNU, INCGNU): Define.
        (INTERNAL_CFLAGS_BASE): Add INCGNU.
        (INTERNAL_LIBS, CLIBS, CDEPS): Add LIBGNU.
        (CLEANDIRS): New.
        ($(LIBGNU), all-lib): New rules.
        (clean, distclean, do-maintainer-clean): Use CLEANDIRS.
        * configure.ac: Use gl_EARLY, gl_INIT, and AM_INIT_AUTOMAKE.
        Simplify AC_CONFIG_AUX_DIR.  Generate gnulib/Makefile.
        * gnulib: New directory, from gnulib-tool.
        * configure, aclocal.m4: Regenerated.

2008-04-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * linux-thread-db.c (have_threads_callback): Check thread->private.

2008-04-13  Nick Roberts  <nickrob@snap.net.nz>
            Vladimir Prus  <vladimir@codesourcery.com>

        Fix @-varobjs.
        * varobj.c (value_of_root): Update the expression for
        floating varobjs.
        * mi/mi-cmd-var.c (varobj_update_one): If type has changed,
        report that.

2008-04-09  Marc Khouzam  <marc.khouzam@ericsson.com>

        * mi/mi-cmd-var.c: Include "mi-getopt.h".
        (mi_parse_format): New.  Factored out from mi_cmd_var_set_format.
        (mi_cmd_var_set_format): Use new mi_parse_format.
        (mi_cmd_var_evaluate_expression): Support for -f option to specify
        format.
        * Makefile.in (mi-cmd-var.o): Update dependencies.

        * varobj.h (varobj_get_formatted_value): Declare.
        * varobj.c (my_value_of_variable): Added format parameter.
        (cplus_value_of_variable): Likewise.
        (java_value_of_variable): Likewise.
        (c_value_of_variable): Likewise.  Evaluate expression based
        on format parameter.
        (struct language_specific): Add format parameter to function member
        *value_of_variable.
        (varobj_get_formatted_value): New.
        (varobj_get_value): Added format parameter to method call.
        
2008-04-08  Joel Brobecker  <brobecker@adacore.com>

        * stabsread.c (cleanup_undefined_types_noname): Manually set the
        instance flags of the undefined type before calling replace_type.

2008-04-08  Vladimir Prus  <vladimir@codesourcery.com>

        * target.h (enum strata): Remove the download_stratum.
        
2008-04-07  Doug Evans  <dje@google.com>

        * buildsym.h (last_source_file): Add dwarf info to comment.
        (last_source_start_addr): Ditto.

2008-04-07  Pedro Alves  <pedro@codesourcery.com>

        * alphanbsd-tdep.c: Include "target.h".
        * mn10300-tdep.c: Include "target.h".
        * Makefile.in (alphanbsd-tdep.o, mn10300-tdep.o): Update.

2008-04-06  Vladimir Prus  <vladimir@codesourcery.com>

        Fix breakpoint condition that use member variables.
        * valops.c (check_field): Remove.
        (check_field_in): Rename to check_field.
        (value_of_this): Use la_name_of_this.
        * value.h (check_field): Adjust prototype.

        * language.h (la_value_of_this): Rename to la_name_of_this.
        * language.c (unknown_language_defn): Specify "this" for
        name_of_this.
        (auto_language_defn): Likewise.
        (local_language_defn): Likewise.
        * ada-lang.c (ada_language_defn): Adjust comment.
        * c-lang.c (c_language_defn): Adjust comment.
        (cplus_language_defn): Specify "this" for name_of_this.
        (asm_language_defn): Adjust comment.
        (minimal_language_defn): Adjust comment.
        * f-lang.c (f_language_defn): Specify NULL for name_of_this.
        * jv-lang.c (java_language_defn): Specify "this" for name_of_this.
        * m2-lang.c (m2_language_defn): Specify "this" for name_of_this.
        * objc-lang.c (objc_language_defn): Specify "self" for
        name_of_this.
        * p-lang.c (pascal_language_defn): Specify "this" for
        name_of_this.
        * scm-lang.c (scm_language_defn): Specify NULL for name_of_this.

        * symtab.c (lookup_symbol_aux): Lookup "this" in the
        proper scope, and check for field in type of "this", without
        trying to create a value.

2008-04-04  Pedro Alves  <pedro@codesourcery.com>

        * mi/mi-cmds.h (enum mi_cmd_result): Delete MI_CMD_ERROR.
        (mi_error_message): Delete declaration.
        * mi/mi-interp.c (mi_cmd_interpreter_exec): Call error instead of
        returning MI_CMD_ERROR.
        * mi/mi-main.c (mi_error_message): Delete.
        (mi_cmd_exec_interrupt):
        (mi_cmd_thread_select, mi_cmd_thread_list_ids)
        (mi_cmd_thread_info): Call error instead of returning
        MI_CMD_ERROR.
        (mi_cmd_data_list_register_values): Call error instead of
        returning MI_CMD_ERROR.  Adapt to new get_register interface.
        (get_register): Change return typo to void.  Call error instead of
        returning MI_CMD_ERROR.
        (mi_cmd_data_write_register_values): Call error instead of
        returning MI_CMD_ERROR.
        (mi_cmd_list_features): Return MI_CMD_DONE.
        (captured_mi_execute_command): Remove MI_CMD_ERROR handling.
        (mi_execute_command): Always print exceptions with -error.

2008-04-04  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Mention new commands set/show multiple-symbols.

2008-04-03  Joel Brobecker  <brobecker@adacore.com>

        * symtab.c (multiple_symbols_ask, multiple_symbols_all)
        (multiple_symbols_cancel): New constants.
        (multiple_symbols_modes, multiple_symbols_mode): New static globals.
        (multiple_symbols_select_mode): New function.
        (_initialize_symtab): Add new set/show multiple-symbols commands.
        * symtab.h (multiple_symbols_ask, multiple_symbols_all)
        (multiple_symbols_cancel, multiple_symbols_select_mode): Declare.
        * ada-lang.c (user_select_syms): Add handling of new multiple-symbols
        setting.
        * linespec.c (decode_line_2): Likewise.

2008-04-03  Doug Evans  <dje@sebabeach.org>

        * symtab.h (enum free_code): Delete free_contents, unused.
        * symmisc.c (free_symtab_block): Delete.
        (free_symtab, case free_code): Delete.

2008-04-01  Aleksandar Ristovski  <aristovski@qnx.com>

        * valops.c (value_cast_structs): New function. Cast related
        STRUCT types up/down and return cast value. The body of this 
        function comes mostly from value_cast_pointers.
        (value_cast_pointers): Code for actual cast STRUCT-STRUCT moved
        to value_cast_structs. Now value_cast_pointers needs only create
        appropriate reference after using value_cast_structs for actual
        casting.
        (value_cast): Handle references.

2008-04-01  Marc Khouzam  <marc.khouzam@ericsson.com>

        * MAINTAINERS: Added myself to section Write After Approval.

2008-03-30  Daniel Jacobowitz  <dan@codesourcery.com>

        * ia64-tdep.c (examine_prologue): Correct array access.

2008-03-28  Aleksandar Ristovski  <aristovski@qnx.com>

        * cp-support.c (first_component_command): Return if no arguments.

2008-03-28  Carlos O'Donell  <carlos@codesourcery.com>

        * ser-mingw.c (ser_windows_open): Open requested name.

2008-03-28  Aleksandar Ristovski  <aristovski@qnx.com>

        * MAINTAINERS: Added myself.

2008-03-28  Pedro Alves  <pedro@codesourcery.com>

        * target.c (find_default_run_target): Allow a NULL `do_mesg'
        parameter.  If it is NULL, don't call error.
        (find_default_can_async_p, find_default_is_async_p): Pass NULL as
        `do_mesg' parameter to find_default_run_target.  If no target was
        found, return 0.

2008-03-28  Daniel Jacobowitz  <dan@codesourcery.com>

        * mips-linux-tdep.c: Update N32/N64 signal frame comments.
        (N64_SIGCONTEXT_LO, N64_SIGCONTEXT_PC, N64_SIGCONTEXT_FPCSR): Update.
        (N64_SIGCONTEXT_FIR, N64_SIGCONTEXT_CAUSE, N64_SIGCONTEXT_BADVADDR):
        Delete.
        (mips_linux_n32n64_sigframe_init): Do not record cause or badvaddr.

2008-03-27  Joel Brobecker  <brobecker@adacore.com>

        GDB 6.8 released.

2008-03-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * features/Makefile (%.dat): Set xmltarget to the base filename
        of the XML source, without subdirectory.
        * regformats/rs6000/powerpc-32.dat: Regenerate.
        * regformats/rs6000/powerpc-64.dat: Regenerate.
        * regformats/rs6000/powerpc-e500.dat: Regenerate.

2008-03-27  Markus Deuling  <deuling@de.ibm.com>

        * xcoffread.c (scan_xcoff_symtab): Replace current_gdbarch by
        objfile arch.

2008-03-27  Nick Roberts  <nickrob@snap.net.nz>

        * mi/mi-main.c (enum captured_mi_execute_command_actions):
        Spell suppress in EXECUTE_COMMAND_SUPPRESS_PROMPT correctly.

2008-03-26  Ulrich Weigand  <uweigand@de.ibm.com>

        * objfiles.h (struct objfile): New GDBARCH member.
        (get_objfile_arch): Add prototype.
        * objfiles.c: Include "arch-utils.h".
        (allocate_objfile): Look up gdbarch associated with bfd.
        (get_objfile_arch): New function.
        * Makefile (objfiles.o): Update dependencies.

        * dwarf2-frame.c (decode_frame_entry_1): Replace current_gdbarch
        by objfile arch.
        * dwarf2loc.c (dwarf_expr_read_reg): Replace current_gdbarch
        by frame arch.
        (locexpr_describe_location): Replace current_gdbarch by
        objfile arch.
        * dwarf2read.c (die_type): Replace current_gdbarch by objfile arch.
        (dwarf2_add_field): Likewise.
        (read_tag_pointer_type): Likewise.
        (read_base_type): Likewise.
        (new_symbol): Likewise.

        * coffread.c (decode_type): Add OBJFILE argument.  Update callers.
        (decode_base_type, decode_function_type): Likewise.
        (coff_read_struct_type, coff_read_enum_type): Likewise.
        (coff_symtab_read): Replace current_gdbarch by objfile arch.
        (decode_base_type): Likewise.
        (coff_read_enum_type): Likewise.
        (coff_read_struct_type): Replace current_objfile by OBJFILE argument.
        (coff_read_enum_type): Likewise.

        * dbxread.c (read_dbx_symtab): Replace current_gdbarch by objfile arch.
        (end_psymtab): Likewise.
        (process_one_symbol): Likewise.

        * mdebugread.c (parse_symbol): Replace current_gdbarch by objfile arch.
        (parse_procedure): Likewise.
        (parse_partial_symbols): Likewise.

        * somread.c (som_symtab_read): Replace current_gdbarch by objfile arch.

        * stabsread.c (define_symbol): Replace current_gdbarch by objfile arch.
        Replace static pcc_promotion_type and pcc_unsigned_promotion_type by
        built-in types.
        (read_range_type): Replace current_gdbarch by objfile arch.  Replace
        static range_index_type by built-in type.
        (read_one_struct_field): Replace current_gdbarch by objfile arch.
        (read_enum_type): Likewise.

        * xcoffread.c (read_xcoff_symtab): Replace current_gdbarch by
        objfile arch.

2008-03-26  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.h (varobj_floating_p): Declare.
        * varobj.c (varobj_floating_p): New.
        * mi/mi-cmd-var.c (mi_cmd_var_update): When passed
        '@' as the name, update all floating varobjs.

2008-03-26  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.c (struct varobj_root): Rename use_selected_frame to
        floating, and clarify the meaning.
        (varobj_create, varobj_update,  new_root_variable): Adjust.
        (value_of_root): Don't use type_changed as in variable,
        adjust comment.
        (c_value_of_root): Adjust.

2008-03-25  Pedro Alves  <pedro@codesourcery.com>

        * linux-nat.c (linux_nat_attach): Add the pid we attached to, to
        gdb's thread list.
        (linux_nat_wait): Add main lwp to gdb's thread list.
        * linux-thread-db.c (find_new_threads_callback): Also attach to
        already listed threads which thread_db didn't know about yet.

2008-03-25  Pedro Alves  <pedro@codesourcery.com>

        * linux-nat.c (drain_queued_events): Fix comment typo.
        (linux_nat_attach): In async mode, don't rely on storing a pending
        status.  Instead place the wait status on the pipe.
        (linux_nat_resume): Remove unreacheable shortcut code in async
        mode.
        (stop_wait_callback): In async mode, don't store pending status.
        Instead, cancel breakpoints or resend the signal appropriatelly.
        (cancel_breakpoint): New, refactored from
        cancel_breakpoints_callback.
        (cancel_breakpoints_callback): Call cancel_breakpoint.
        (pipe_to_local_event_queue): Remove special token processing.
        (linux_nat_wait): Issue an internal error if a pending status is
        found in async mode.

2008-03-24  Daniel Jacobowitz  <dan@codesourcery.com>

        * inflow.c (gdb_has_a_terminal): Guard access to our_process_group.

2008-03-24  Nick Roberts  <nickrob@snap.net.nz>
            Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.c  (struct varobj_root): New component thread_id.
        (varobj_get_thread_id, check_scope): New functions.
        (c_value_of_root): Use check_scope.  Switch to the
        proper thread if necessary.

        * varobj.h (varobj_get_thread_id): New extern.

        * mi/mi-cmd-var.c (print_varobj): Add thread-id field.

2008-03-23  Daniel Jacobowitz  <dan@codesourcery.com>

        PR gdb/544
        * top.c: Revert 2008-03-21 changes.

2008-03-23  Vladimir Prus  <vladimir@codesourcery.com>

        * thread.c (make_cleanup_restore_current_thread): Make it
        globally visible.
        * gdbthread.h (make_cleanup_restore_current_thread): Declare.
        * varobj.c (varobj_update): Don't save/restore frame.
        (c_value_of_root): Save/restore thread and frame here,
        using make_cleanup_restore_current_thread.
        * Makefile.in: Update dependecies.

2008-03-23  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.c (struct varobj_root): Clarify
        comment on the frame field.
        (varobj_create): Don't set frame if we have no
        block.

2008-03-21  Daniel Jacobowitz  <dan@codesourcery.com>

        PR gdb/544
        Suggested by Jan Kratochvil:
        * top.c (gdb_rl_operate_and_get_next_completion): Call
        rl_redisplay_function.
        (gdb_rl_redisplay): New.
        (init_main): Set rl_redisplay_function.

2008-03-21  Thomas Mittelstaedt  <T.Mittelstaedt@cadenas.de>  (tiny change)

        * aix-thread.c (pdc_read_regs): Fix compiler warning.
        (pdc_write_regs, aix_thread_resume, fetch_regs_kernel_thread)
        (store_regs_kernel_thread): Likewise.

2008-03-21  Pedro Alves  <pedro@codesourcery.com>

        Linux native async support.

        * target.h (struct target_ops): Delete to_async_mask_value and add
        to_async_mask.
        (target_is_async_p, target_async): Formatting.
        (target_async_mask_value): Delete.
        (target_async_mask): Delete function declaration, and add new
        target macro with the same name.

        * target.c (update_current_target): Replace to_async_mask_value by
        to_async_mask.  Default to_async_mask to return_one.
        (target_async_mask): Delete.
        (find_default_can_async_p, find_default_is_async_p): New.
        (init_dummy_target): register find_default_can_async_p and
        find_default_is_async_p on the dummy target.

        * linux-nat.c: Include inf-loop.h, event-loop.h and event-top.h.
        (debug_linux_nat_async): New global.
        (show_debug_linux_nat_async): New function.
        (linux_nat_async_enabled, linux_nat_async_mask_value)
        (linux_nat_event_pipe, linux_nat_num_queued_events)
        (linux_nat_async_events_enabled): New globals.
        (struct waitpid_result): New struct.
        (waitpid_queue): New global.
        (queued_waitpid, push_waitpid, drain_queued_events): New.
        (my_waitpid): Call queued_waitpid.
        (linux_child_follow_fork): Disable async events during the call.
        (blocked_mask): Delete.
        (sync_sigchld_action, async_sigchld_action): New globals.
        (lin_lwp_attach_lwp): In sync mode, don't reblock SIGCHLD.  In
        async mode, block events during the call.
        (linux_nat_create_inferior): New.
        (linux_nat_attach): In sync mode, restore the mask states.  In
        async mode, wake the event loop immediatelly.
        (detach_callback): Drain all queued events of the lwp we're
        detaching from.
        (linux_nat_detach): Block async mode, and drain events of the main
        process.
        (linux_nat_resume): If in async mode, mask async events during the
        call.  If short circuiting, force event loop to wake up.  If
        resuming, set target_executing, and register target events in the
        event loop.
        (pipe_to_local_event_queue, local_event_queue_to_pipe): New.
        (linux_nat_wait): In async mode, block events during the call.
        Only enable/disable passing SIGINT to the inferior in sync mode.
        Get events from local waitpid queue.  If no interesting events was
        found, return to events loop.  Reregister target events in the
        event loop on exit.  In sync mode, no need to reblock SIGCHLD.
        (linux_nat_kill): Disable events on entry.
        (linux_nat_mourn_inferior): In sync mode, don't restore the masks
        here.  Detach async mode from the event loop if there are no more
        forks available, otherwise leave it on.
        (sigchld_handler): Assure this is called only in sync mode.
        (linux_async_permitted, linux_async_permitted_1): New globals.
        (set_maintenance_linux_async_permitted)
        (show_maintenance_linux_async_permitted): New functions.
        (linux_nat_is_async_p, linux_nat_can_async_p)
        (linux_nat_async_mask): New.
        (linux_nat_event_pipe_pop, linux_nat_event_pipe_push): New.
        (get_pending_events, async_sigchld_handler): New.
        (linux_nat_async_events): New.
        (async_terminal_is_ours): New global.
        (linux_nat_terminal_inferior, linux_nat_terminal_ours): New.
        (async_client_callback, async_client_context): New.
        (linux_nat_async_file_handler, linux_nat_async)
        (linux_nat_disable_async, linux_nat_enable_async): New.
        (linux_nat_add_target): Register linux_nat_create_inferior,
        linux_nat_can_async_p, linux_nat_is_async_p, linux_nat_async,
        linux_nat_async_mask, linux_nat_terminal_inferior and
        linux_nat_terminal_ours.
        (_initialize_linux_nat): Remove local action variable, and update
        code that used it to use sync_sigchld_action.  Add new
        "lin-lwp-async" debug set/show command.  Put the "lin-lwp" debug
        set/show command in the maintenance class.  Add new "linux-async"
        maintenance set/show command.  Block SIGCHLD by default.  Setup
        async_sichld_action, and sync_sigchld_action.  Install the default
        async mode.
        (lin_thread_get_thread_signals): Use a local sigset_t for blocking
        the cancel signals.

        * linux-thread-db.c (re_check_for_thread_db): New.
        (clear_lwpid_callback): Handle TARGET_WAITKIND_IGNORE.
        (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
        (thread_db_async_mask): New.
        (init_thread_db_ops): Register thread_db_can_async_p,
        thread_db_is_async_p, thread_db_async and thread_db_async_mask.

        * remote.c (remote_async_mask_value): New.
        (remote_return_zero): New.
        (init_remote_ops): Register remote_return_zero as callbacks of
        to_can_async_p and to_is_async_p.
        (remote_can_async_p, remote_is_async_p, remote_async): Update to
        use remote_async_mask_value.
        (remote_async_mask): New.
        (init_remote_async_ops): Remove to_async_mask_value setting and
        register remote_async_mask as to_async_mask callback in
        remote_async_ops.

        * Makefile.in (linux-nat.o): Update.

2008-03-21  Daniel Jacobowitz  <dan@codesourcery.com>

        * gdbthread.h (add_thread_with_info): New.
        * linux-thread-db.c: Add some documentation.
        (GET_LWP, GET_PID, GET_THREAD, is_lwp, is_thread, BUILD_LWP): Delete.
        (struct private_thread_info): Remove th_valid and ti_valid.
        Replace ti with tid.
        (thread_get_info_callback): Do not add TID to the new ptid.  Do
        not cache th or ti.
        (thread_db_map_id2thr, lwp_from_thread): Delete functions.
        (thread_from_lwp): Assert that the LWP is set.  Do not add TID to the
        new PTID.
        (attach_thread): Handle an already-existing thread.  Use
        add_thread_with_info.  Cache the th and tid.
        (detach_thread): Verify that private was set.  Remove verbose
        argument and printing.  Update caller.
        (thread_db_detach): Do not adjust inferior_ptid.
        (clear_lwpid_callback, thread_db_resume, thread_db_kill): Delete.
        (check_event, find_new_threads_callback): Do not add TID to the new PTID.
        (thread_db_wait): Do not use lwp_from_thread.
        (thread_db_pid_to_str): Use the cached TID.
        (thread_db_extra_thread_info): Check that private is set.
        (same_ptid_callback): Delete.
        (thread_db_get_thread_local_address): Do not use it or check
        is_thread.  Check that private is set.  Assume that the thread
        handle is already cached.
        (init_thread_db_ops): Remove to_resume and to_kill.
        * thread.c (add_thread_with_info): New.
        (add_thread): Use it.
        * linux-nat.c (find_thread_from_lwp): Delete.
        (exit_lwp): Do not use it.  Check print_thread_events.  Print before
        deleting the thread.
        (GET_PID, GET_LWP, BUILD_LWP, is_lwp): Move to...
        * linux-nat.h (GET_PID, GET_LWP, BUILD_LWP, is_lwp): ...here.
        * inf-ttrace.c (inf_ttrace_wait): Use print_thread_events and
        printf_unfiltered for thread exits.
        * procfs.c (procfs_wait): Likewise.

2008-03-21  Chris Demetriou  <cgd@google.com>

        * symtab.c (rbreak_command): Quote symbol name before passing
        it to break_command.

2008-03-21  Daniel Jacobowitz  <dan@codesourcery.com>

        * eval.c (evaluate_subexp_for_address): Clarify error message.
        Use value_must_coerce_to_target.
        * infcall.c (value_arg_coerce): Call value_coerce_to_target.
        * valops.c (value_assign): Call value_coerce_to_target when
        assigning to anything but internalvars.  Leave GDB-side arrays
        as arrays when assigning to internalvars.
        (value_must_coerce_to_target, value_coerce_to_target): New.
        (value_coerce_array, value_addr): Call value_coerce_to_target.
        (value_array): Create the array in GDB's memory instead of
        the inferior's.
        * value.h (value_must_coerce_to_target, value_coerce_to_target):
        Declare.

2008-03-21  Daniel Jacobowitz  <dan@codesourcery.com>

        * top.c (quit_confirm): Warn that we will kill the program.

2008-03-19  Pedro Alves  <pedro@codesourcery.com>

        * inflow.c (terminal_ours_1): Guard access to
        inferior_process_group with #ifdef PROCESS_GROUP_TYPE.

2008-03-18  Ulrich Weigand  <uweigand@de.ibm.com>
            Jim Blandy  <jimb@codesourcery.com>
            Daniel Jacobowitz  <drow@false.org>

        * dwarf2expr.h (struct dwarf_expr_context): Add ADDR_SIZE member.
        (dwarf2_read_address): Update prototype.

        * dwarf2expr.c (unsigned_address_type): Add ADDR_SIZE parameter.
        (signed_address_type): Likewise.
        (dwarf2_read_address): Replace BYTES_READ parameter with ADDR_SIZE.
        (execute_stack_op): Update calls to unsigned_address_type,
        signed_address_type and dwarf2_read_address.  Fix implementation
        of DW_OP_deref_size.

        * dwarf2loc.h (dwarf2_per_cu_objfile): Add prototype.
        (dwarf2_per_cu_addr_size): Likewise.
        (struct dwarf2_locexpr_baton): Replace OBJFILE with PER_CU.
        (struct dwarf2_loclist_baton): Likewise.

        * dwarf2loc.c (find_location_expression): Update calls to
        dwarf2_read_address.  Use dwarf2_per_cu_objfile and
        dwarf2_per_cu_addr_size to retrieve PER_CU parameters.
        (locexpr_describe_location): Likewise.
        (dwarf2_evaluate_loc_desc): Replace OBJFILE with PER_CU parameter.
        Set ctx->addr_size to dwarf2_per_cu_addr_size (per_cu).
        (dwarf2_loc_desc_needs_frame): Add PER_CU parameter.  Set ctx->addr_size
        to dwarf2_per_cu_addr_size (per_cu).
        (locexpr_read_variable): Update dwarf2_evaluate_loc_desc call.
        (loclist_read_variable): Likewise.
        (locexpr_read_needs_frame): Update dwarf2_loc_desc_needs_frame call.

        * dwarf2read.c (dwarf2_symbol_mark_computed): Set baton->per_cu
        instead of baton->objfile.
        (dwarf2_per_cu_obfile): New function.
        (dwarf2_per_cu_addr_size): Likewise.

        * dwarf2-frame.c (struct comp_unit): Move higher.
        (struct dwarf2_cie): Add UNIT and ADDR_SIZE members.
        (execute_stack_op): Add ADDR_SIZE parameter; set ctx->addr_size.
        (execute_cfa_program): Add FDE parameter.  Replace EH_FRAME_P
        parameter by using fde->eh_frame_p.  Use read_encoded_value
        to implement DW_CFA_set_loc.
        (struct dwarf2_frame_cache): Add ADDR_SIZE member.
        (dwarf2_frame_cache): Set cache->addr_size.  Update calls to
        execute_stack_op and execute_cfa_program.
        (dwarf2_frame_prev_register): Update calls to execute_stack_op.
        (size_of_encoded_value): Remove.
        (read_encoded_value): Add PTR_LEN and FUNC_BASE parameters.
        Remove call to size_of_encoded_value.  Implement DW_EH_PE_funcrel.
        (add_cie): Set cie->unit backlink.
        (decode_frame_entry_1): Set cie->addr_size.  Update calls to
        read_encoded_value.
        (dwarf2_build_frame_info): Allocate UNIT on objfile obstack.

2008-03-17  Markus Deuling  <deuling@de.ibm.com>

        * i386-tdep.c (i386_print_insn): Remove unnecessary call to
        gdbarch_bfd_arch_info.

2008-03-17  Joel Brobecker  <brobecker@adacore.com>

        * aix-thread.c (pdc_read_regs): Minor reformatting.

2008-03-17  Vladimir Prus  <vladimir@codesourcery.com>

        * thread.c (print_thread_info): Don't insist
        on having current thread if there are no
        threads at all.

2008-03-17  Pedro Alves  <pedro@codesourcery.com>

        * infcmd.c (attach_command_post_wait)
        (attach_command_continuation): New.
        (attach_command): Support background async execution, and async
        execution in synchronous mode.

2008-03-17  Daniel Jacobowitz  <dan@codesourcery.com>

        * stack.c (print_stack_frame, print_frame): Use RETURN_MASK_ERROR.
        * symmisc.c (dump_symtab_1): Likewise.
        * wrapper.c (gdb_value_struct_elt): Likewise.

2008-03-17  Pedro Alves  <pedro@codesourcery.com>

        * linux-nat.c (linux_nat_filter_event): Fix comment typo.

2008-03-17  Pedro Alves  <pedro@codesourcery.com>

        * linux-nat.c (linux_nat_filter_event): New, refactored from
        linux_nat_wait.
        (linux_nat_wait): Call linux_nat_filter_event.

2008-03-17  Ulrich Weigand  <uweigand@de.ibm.com>

        * top.c (execute_command): Fix uninitialized variable error.

2008-03-16  Nick Hudson  <nick.hudson@dsl.pipex.com>

        * Makefile.in (amd64nbsd-nat.o): New dependency.
        * amd64nbsd-nat.c: Include "nbsd-nat.h".
        (_initialize_amd64nbsd_nat): Update target vector to use
        nbsd_pid_to_exec_file.
        * config/i386/nbsd64.mh (NATDEPFILES): Add nbsd-nat.o.

2008-03-15  Vladimir Prus  <vladimir@codesourcery.com>

        Remove ignoring leading exec events code.
        * fork-child.c (startup_inferior): Do not set
        inferior_ignoring_leading_exec_events.
        * inf-child.c (inf_child_reported_exec_events_per_exec_call): Remove.
        (inf_child_target): Do not set to_reported_exec_events_per_exec_call.
        * infrun.c (inferior_ignoring_leading_exec_events): Remove.
        (handle_inferior_event): Remove code for ignoring leading exec
        events.
        * target.c (update_current_target): Do not inherit, or default,
        to_reported_exec_events_per_exec_call.
        (debug_to_reported_exec_events_per_exec_call): Remove.
        (setup_target_debug): Do not set to_reported_exec_events_per_exec_call.
        * target.h (target_reported_exec_events_per_exec_call): Remove.
        (struct target): Remove the to_reported_exec_events_per_exec_call
        field.

2008-03-15  Vladimir Prus  <vladimir@codesourcery.com>

        Implement -thread-info.
        * gdbthread.h (print_thread_info): Declare.

        * thread.c (print_thread_info): New, extracted
        from info_threads_command and adjusted to
        work for CLI and MI.
        (info_threads_command): Use print_thread_info.
        * Makefile.in: Update dependencies.

        * mi/mi-cmds.c (mi_cmds): Specify a handler
        for -thread-info.
        * mi/mi-cmds.h (mi_cmd_thread_info): Declare.
        * mi/mi-main.c (mi_cmd_thread_info): New.
        (mi_cmd_list_features): Include 'thread-info'.

2008-03-14  Kevin Buettner  <kevinb@redhat.com>

        * mips-tdep.c (mips32_scan_prologue): Use the ABI register size
        to decide whether to match instruction patterns using "sw" and "sd".

2008-03-14  Pedro Alves  <pedro@codesourcery.com>

        * infcmd.c (jump_command): Postpone disabling stdin until after
        the possible query.

2008-03-14  Pedro Alves  <pedro@codesourcery.com>

        * inflow.c (gdb_getpgrp): New.
        (gdb_has_a_terminal): Use get_getpgrp.
        (terminal_ours_1): If attach_flag is set, don't refetch
        inferior_process_group.

2008-03-14  Pedro Alves  <pedro@codesourcery.com>

        * features/library-list.dtd: Allow "section" elements as children
        of "library".  Add "section" element and describe its attributes.

        * solib-target.c (struct lm_info): Add section_bases member.
        (library_list_start_segment): Error out if seen a section element.
        (library_list_start_section): New.
        (library_list_end_library): New.
        (solib_target_free_library_list): Free section_bases.
        (section_attributes): New.
        (library_children): Make "segment" optional.  Add "section" child.
        (library_list_children): Register library_list_end_library.
        (solib_target_relocate_section_addresses): Handle section bases.

        * NEWS: Mention new qXfer:libraries:read section offsets support.

2008-03-14  Vladimir Prus  <vladimir@codesourcery.com>

        * defs.h (do_exec_error_cleanups, discard_exec_error_cleanups)
        (make_exec_error_cleanup): Remove declarations.
        * utils.c (exec_error_cleanup_chain): Remove.
        (do_exec_error_cleanups, discard_exec_error_cleanups)
        (make_exec_error_cleanup): Remove.
        * event-loop.c (start_event_loop): Adjust call to
        async_enable_stdin.
        * event-top.c (async_enable_stdin): Remove the paramater dummy.
        (async_disable_stdin): Don't register async_enable_stdin via
        cleanup.
        * inf-loop.c (inferior_event_handler): Don't
        call do_exec_error_cleanups.  Call async_enable_stdin instead.
        * event-loop.c (start_event_loop): Adjust call to
        async_enable_stdin.
        * tui/tui-interp.c (tui_command_loop): Adjust call to
        async_enable_stdin.

2008-03-14  Vladimir Prus  <vladimir@codesourcery.com>

        Async mode fixes.
        * Makefile.in (infcmd.o, inf-loop.o): Update dependencies.
        * breakpoint.c (bpstat_do_actions): In async mode,
        don't jump to top expecting stop_bpstat to be already
        updated.
        * event-loop.c (start_event_loop): Call async_enable_stdin
        on exception.
        * event-top.c (async_enable_stdin): Do nothing if sync_execution
        is not set.
        (command_handler): Do not setup continuation here.
        (command_line_handler_continuation): Move to...
        * top.c (command_line_handler_continuation): ... here.
        (execute_command): In async mode, register continuation.
        Don't check frame's language in running in async mode.
        * exceptions.c (throw_exception): Don't do exec_error_cleanups.
        * inf-loop.c (complete_execution): Inline into...
        (inferior_event_handler): ... here.  Clear target_executing before
        doing any cleanups.  Don't try to show prompt if the target was
        resumed.
        * infcmd.c (signal_command): Add support for async mode.
        (finish_command): Only add continuation if the target was
        successfully resumed.
        * remote.c (init_async_opts): Register to_get_thread_local_address
        handler.
        * mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess
        with sync_execution.
        * tui/tui-interp.c (tui_command_loop): Call async_enable_stdin
        on exception.

2008-03-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * corefile.c (reopen_exec_file): Use exec_bfd_mtime.
        * exec.c (exec_bfd_mtime): Define.
        (exec_close): Clear it.
        (exec_file_attach): Set it.
        * gdbcore.h (exec_bfd_mtime): Declare.
        * source.c (find_source_lines): Do not use bfd_get_mtime.

2008-03-14  Vladimir Prus  <vladimir@codesourcery.com>

        * top.c (simplified_command_loop): Remove.

2008-03-14  Vladimir Prus  <vladimir@codesourcery.com>

        Remove unused remote.c hooks.
        * remote.c (deprecated_target_resume_hook)
        (deprecated_target_wait_loop_hook): Remove.
        (remote_resume): Do not call deprecated_target_resume_hook.
        (remote_wait): Do not call deprecated_target_wait_loop_hook.
        (remote_async_wait): Likewise.

2008-03-14  Vladimir Prus  <vladimir@codesourcery.com>

        Implement MI notification for new threads.
        * doc/observer.texi (new_thread): Document.
        * observer.sh: Forward declare struct thread_info.
        * thread.c (add_thread): Notify observer.

        * interps.h (interp_init_ftype): New parameter
        top_level.
        (interp_set): Likewise.
        (top_level_interpreter_data): Declare.
        * interps.c (interp_set): New parameter top_level.
        Pass it to interpreter's init function.  Remember
        top level interpreter.
        (interpreter_exec_cmd): Adjust.
        (top_level_interpreter_data): New.
        * main.c (captured_main): Pass 1 for top_level
        parameter of interp_set.
        * cli/cli-interp.c (cli_interpreter_init): New
        parameter top_level.
        * tui/tui-interp.c (tui_init): New parameter top_level.

        * mi/mi-interp.c (mi_new_thread): New.
        (mi_interpreter_init): If top level, register
        observer for new threads.

        * Makefile.in (mi-interp.o, thread.o): Update dependencies.

2008-03-14  Pedro Alves  <pedro@codesourcery.com>

        * top.c (execute_command): Disable break and stop
        commands in async mode.

2008-03-14  Pedro Alves  <pedro@codesourcery.com>

        revert:
        2008-03-14  Pedro Alves  <pedro@codesourcery.com>
        * inf-loop.c (inferior_event_handler): Don't include remote.h.
        Call target_stop in the INF_QUIT_REQ case.
        * Makefile.in (inf-loop.o): Update.

2008-03-14  Pedro Alves  <pedro@codesourcery.com>

        * inf-loop.c (inferior_event_handler): Don't include remote.h.
        Call target_stop in the INF_QUIT_REQ case.
        * Makefile.in (inf-loop.o): Update.

2008-03-14  Pedro Alves  <pedro@codesourcery.com>

        * top.c (execute_command): Enable break, info and interrupt
        commands in async mode.

2008-03-13  Vladimir Prus  <vladimir@codesourcery.com>
            Daniel Jacobowitz  <dan@codesourcery.com>

        * breakpoint.h (breakpoint_restore_shadows): New
        declaration.
        * breakpoint.c (breakpoint_restore_shadows): New.
        (read_memory_nobpt): Delete.
        * gdbcore.h (read_memory_nobpt): Delete declaration.
        * target.c (memory_xfer_partial): Call
        breakpoint_restore_shadows.
        (restore_show_memory_breakpoints)
        (make_show_memory_beakpoints_cleanup): New.
        (show_memory_breakpoints): New.
        * target.h (make_show_memory_beakpoints_cleanup): Declare.
        * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint):
        Make sure we see memory breakpoints when checking if
        breakpoint is still there.
        * alpha-tdep.c, alphanbsd-tdep.c, frame.c, frv-tdep.c,
        hppa-linux-tdep.c, hppa-tdep.c, i386-linux-nat.c, i386-tdep.c,
        m68klinux-tdep.c, mips-tdep.c, mn10300-tdep.c, s390-tdep.c,
        sparc-tdep.c: Use target_read_memory instead of read_memory_nobpt.

2008-03-12  Pedro Alves  <pedro@codesourcery.com>

        * thread.c (add_thread): Use printf_unfiltered to print.

2008-03-12  Joel Brobecker  <brobecker@gnat.com>

        * sol-thread.c: Replace use of TM_I386SOL2_H by an expression
        that is true only on x86-solaris and x86_64-solaris.
        * procfs.c: Likewise. Move procfs_find_LDT_entry up together
        with proc_get_LDT_entry.

2008-03-12  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * configure.ac (AC_CHECK_FUNCS): Add check for setsid.
        * config.in, configure: Regenerate.
        * fork-child.c (fork_inferior): Call create_tty_session.
        * inflow.c (new_tty): Set controlling terminal with TIOCSCTTY.
        (create_tty_session): New function.
        * terminal.h: Declare create_tty_session.

2008-03-12  Alan Modra  <amodra@bigpond.net.au>

        PR 5900
        * elfread.c (elf_symtab_read): Make shndx an unsigned int.
        * mipsread.c: Include elf/internal.h.
        (read_alphacoff_dynamic_symtab): Map external reserved sym_shndx
        to internal range.

2008-03-11  Markus Deuling  <deuling@de.ibm.com>

        * win32-nat.c (do_win32_fetch_inferior_registers): Use get_regcache_arch
        to get at the current architecture and at the target specific vector.
        Add target specific vector to I387_FISEG_REGNUM and I387_FOP_REGNUM and
        remove define of I387_ST0_REGNUM.

        * amd64-tdep.c (I387_ST0_REGNUM): Remove define.

        (amd64_supply_fxsave, amd64_collect_fxsave): Use get_regcache_arch to
        get at the current architecture
        (I387_FISEG_REGNUM, I387_FOSEG_REGNUM): Add target specific vector as
        parameter.

        * i386-tdep.c: Remove various define's and undef's of I387_ST0_REGNUM,
        I387_NUM_XMM_REGS and I387_MM0_REGNUM.

        (I387_NUM_XMM_REGS, I387_XMM0_REGNUM, I387_MXCSR_REGNUM,
        I387_ST0_REGNUM, I387_FCTRL_REGNUM, I387_MM0_REGNUM,
        (I387_FSTAT_REGNUM): Add target specific vector as parameter.

        (i386_register_name, i386_dbx_reg_to_regnum): Use gdbarch_tdep to get
        at the target specific vector.

        (i386_get_longjmp_target): Use get_frame_arch to get at the current
        architecture. Use gdbarch_tdep to get at the target specific vector.

        (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as parameter and
        update caller. Use gdbarch_tdep to get at the target specific vector.

        (i386_register_to_value: Use get_frame_arch to get at the current
        architecture.

        * i386-tdep.h (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as
        parameter.

        * i387-tdep.c (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
        I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM
        I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_ST0_REGNUM, FSAVE_ADDR,
        FXSAVE_ADDR, I387_XMM0_REGNUM): Add target specific vector as parameter.

        (I387_ST0_REGNUM, I387_NUM_XMM_REGS): Remove various define's and
        undef's.

        (i387_convert_register_p, i387_register_to_value,
        i387_value_to_register): Update call for i386_fp_regnum_p.

        * i387-tdep.h: Remove comment.
        (I387_ST0_REGNUM, I387_NUM_XMM_REGS, I387_MM0_REGNUM): Add define.
        (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM,
        I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM,
        I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_XMM0_REGNUM,
        I387_MXCSR_REGNUM): Add target specific vector as parameter.

2008-03-10  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (fork-child.o): Update.
        * NEWS: Document "set exec-wrapper" and the gdbserver --wrapper
        argument.  Gather all gdbserver features together.
        * fork-child.c (exec_wrapper): New variable.
        (fork_inferior): Use it.
        (startup_inferior): Skip an extra trap if using "set exec-wrapper".
        (unset_exec_wrapper_command, _initialize_fork_child): New.

2008-03-10  Hidetaka Takano  <hidetaka.takano@glb.toshiba.co.jp>

        * source.c (directory_command): Modify the determination of
        condition of terminal "from_tty".

2008-03-10  Matt Rice  <ratmice@gmail.com>

        * dwarf2read.c (set_cu_language): Add DW_LANG_ObjC.

2008-03-10  Hidetaka Takano  <hidetaka.takano@glb.toshiba.co.jp>

        * spu-tdep.c (info_spu_event_command): Insert a '\0' to the end
        of the data passing to strtoulst function.
        (info_spu_signal_command): Likewise.

2008-03-08  Vladimir Prus  <vladimir@codesourcery.com>

        * mi/mi-interp.c (mi_command_loop): Remove
        commented-out code.
        
2008-03-07  Joel Brobecker  <brobecker@adacore.com>

        * remote.c (extended_remote_attach_1): Make local variable pid an int
        instead of a pid_t.

2008-03-07  Joel Brobecker  <brobecker@adacore.com>

        * solib-svr4.c (svr4_same_1): New function, originally extracted
        from svr4_same and expanded to handle the sparc64 case.
        (svr4_same): Move up and reimplement using svr4_same_1.
        (enable_break): Use svr4_same_1 to do shared library name comparisons.

2008-03-07  Ramana Radhakrishnan  <ramana.r@gmail.com>

        * MAINTAINERS: Move self to Paper trail.

2008-03-05  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (mingw-hdep.o, posix-hdep.o, remote-fileio.o): Update.
        * event-loop.c (call_async_signal_handler): New.
        * event-loop.h (call_async_signal_handler)
        (gdb_call_async_signal_handler): Declare.
        (mark_async_signal_handler): Add comments.
        * event-top.c (handle_sigint): Use gdb_call_async_signal_handler.
        * mingw-hdep.c (sigint_event, sigint_handler): New.
        (gdb_select): Use them.  Wait for the readline signal handler
        to finish.
        (gdb_call_async_signal_handler, _initialize_mingw_hdep): New functions.
        * posix-hdep.c (gdb_call_async_signal_handler): New function.
        * remote-fileio.c (sigint_fileio_token, async_remote_fileio_interrupt):
        New.
        (remote_fileio_ctrl_c_signal_handler): Use
        gdb_call_async_signal_handler.
        (initialize_remote_fileio): Initialize sigint_fileio_token.
        * remote.c (initialize_sigint_signal_handler, handle_remote_sigint): Do
        not initialize tokens here.
        (handle_remote_sigint_twice): Likewise.  Reinstall
        handle_remote_sigint.
        (async_remote_interrupt_twice): Just call interrupt_query.
        (cleanup_sigint_signal_handler): Do not delete tokens.
        (remote_interrupt, remote_interrupt_twice): Use
        gdb_call_async_signal_handler.
        (interrupt_query): Reinstall the default signal handler.
        (_initialize_remote): Initialize tokens here.

2008-03-04  Joel Brobecker  <brobecker@adacore.com>

        * features/rs6000/power-core.xml, features/rs6000/power64-core.xml,
        features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
        Change the type of the lr register to code_ptr.
        * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
        features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
        features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
        features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
        features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
        features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
        features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c: Regenerate.

2008-03-03  James E. Wilson  <wilson@tuliptree.org>

        * MAINTAINERS: Update my email address.

2008-03-03  Keith Seitz  <keiths@redhat.com>

        From Dave Murphy  <davem@devkitpro.org>:
        * configure.ac: Set tcl configdir to win under mingw.
        * configure: Regenerate.

2008-03-03  Daniel Jacobowitz  <dan@codesourcery.com>

        * breakpoint.c (fetch_watchpoint_value): New function.
        (update_watchpoint): Set and clear val_valid.  Use
        fetch_watchpoint_value.  Handle unreadable values on the
        value chain.  Correct check for user-requested array watchpoints.
        (breakpoint_init_inferior): Clear val_valid.
        (watchpoint_value_print): New function.
        (print_it_typical): Use it.  Do not free or clear old_val.  Print
        watchpoints even if old_val == NULL.
        (watchpoint_check): Use fetch_watchpoint_value.  Check for values
        becoming readable or unreadable.
        (watch_command_1): Use fetch_watchpoint_value.  Set val_valid.
        (do_enable_watchpoint): Likewise.
        * breakpoint.h (struct breakpoint): Update comment for val.  Add
        val_valid.
        * NEWS: Mention watchpoints on inaccessible memory.

2007-02-29  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (i386-nat.o): Update.
        * amd64-linux-nat.c (_initialize_amd64_linux_nat): Call
        i386_use_watchpoints.
        * i386-linux-nat.c (_initialize_i386_linux_nat): Call
        i386_use_watchpoints.
        * i386-nat.c (i386_stopped_data_address): Take two arguments.
        (i386_stopped_by_watchpoint): Update call.
        (i386_can_use_hw_breakpoint, i386_use_watchpoints): New.
        * config/i386/nm-i386.h: Conditionalize definitions on
        ! I386_WATCHPOINTS_IN_TARGET_VECTOR.
        (i386_use_watchpoints): Declare.
        (i386_stopped_data_address): Update.
        * config/i386/nm-linux.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
        * config/i386/nm-linux64.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.

2008-02-29  Joel Brobecker  <brobecker@adacore.com>

        GDB 6.8 branch created (branch timestamp: 2008-02-26 10:00 UTC)
        * version.in: Bump version to 6.8.50.20080229-cvs.

2008-02-28  Markus Deuling  <deuling@de.ibm.com>

        * f-typeprint.c (f_print_type): Handle NULL pointer in VARSTRING
        properly.

2008-02-28  Tom Tromey  <tromey@redhat.com>

        * infcmd.c (notice_args_read): Print result of get_inferior_args.

2008-02-28  Daniel Jacobowitz  <dan@codesourcery.com>

        * infcmd.c (kill_if_already_running): Make static.  Use
        target_require_runnable.
        * target.c (target_require_runnable): New.
        * target.h (target_require_runnable): Declare.

2008-02-28  Daniel Jacobowitz  <dan@codesourcery.com>

        * frame.c (reinit_frame_cache): Only annotate if frames were
        previously valid.

2008-02-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * regformats/reg-ppc.dat: Rename "ps" to "msr".
        * regformats/reg-ppc64.dat: Likewise.

2008-02-28  Ulrich Weigand  <uweigand@de.ibm.com>

        * features/Makefile (%.dat): Emit xmltarget statement.

        * regformats/regdat.sh: Support xmltarget and xmlarch statments.
        Generate code to set gdbserver_xmltarget in init_registers_${name}.

        * regformats/arm-with-iwmmxt.dat: Regenerate.
        * regformats/mips64-linux.dat: Regenerate.
        * regformats/mips-linux.dat: Regenerate.
        * regformats/rs6000/powerpc-32.dat: Regenerate.
        * regformats/rs6000/powerpc-64.dat: Regenerate.
        * regformats/rs6000/powerpc-e500.dat: Regenerate.

        * regformats/reg-arm.dat: Add xmlarch statement.
        * regformats/reg-i386.dat: Likewise.
        * regformats/reg-i386-linux.dat: Likewise.
        * regformats/reg-x86-64-linux.dat: Likewise.
        * regformats/reg-spu.dat: Likewise.

2008-02-27  Daniel Jacobowitz  <dan@codesourcery.com>

        * remote.c (remote_wait, remote_async_wait): Stop if we receive
        an error.

2008-02-27  Daniel Jacobowitz  <dan@codesourcery.com>

        * utils.c (debug_timestamp): New.
        (vfprintf_unfiltered): Print timestamps if requested.
        (show_debug_timestamp): New.
        (initialize_utils): Register "set debug timestamp".
        * NEWS: Mention "set debug timestamp".  Add GDB 6.8 section.

2008-02-27  Joel Brobecker  <brobecker@adacore.com>

        * breakpoint.c (skip_prologue_sal): New function.
        (resolve_sal_pc): Adjust SAL past prologue if the SAL was
        computed from a line number.

2008-02-27  Joel Brobecker  <brobecker@adacore.com>

        * features/rs6000/power-core.xml, features/rs6000/power64-core.xml
        features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
        Set PC register type to "code_ptr".
        * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
        features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
        features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
        features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
        features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
        features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
        features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c:
        Regenerate.

2008-02-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * regformats/regdat.sh: Rename init_registers function in
        generated file to init_registers_${name}.

        * regformats/reg-crisv32.dat: Set "name" to crisv32.
        * regformats/reg-ppc64.dat: Set "name" to ppc64.
        * regformats/reg-s390x.dat: Set "name" to s390x.

2008-02-26  Greg Law  <glaw@undo-software.com>

        * regcache.c (registers_changed): Call reinit_frame_cache.

2008-02-26  Daniel Jacobowitz  <dan@codesourcery.com>

        * configure.tgt (sh-*-linux*): Match sh*.  Add glibc-tdep.o.
        * sh-linux-tdep.c (sh_linux_init_abi): Use glibc_skip_solib_resolver
        and svr4_fetch_objfile_link_map.
        * Makefile.in (sh-linux-tdep.o): Update.

2008-02-26  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * amd64-tdep.c (amd64_classify): Add support for decimal float
        types.
        * i386-tdep.c (i386_return_value): Make 128-bit decimal float
        use the struct return convention.

2008-02-26  Nick Roberts  <nickrob@snap.net.nz>

        * breakpoint.c (print_one_breakpoint_location): Revert Enb field
        to old format.  Discard breakpoint address if shared library is
        unloaded.
        (breakpoint_1): Adjust formatting of table header accordingly.

2008-02-25  Vladimir Prus  <vladimir@codesourcery.com>

       * remote.c (remote_get_threadlist): If the response
       is empty, don't try to parse it.

2008-02-23  Vladimir Prus  <vladimir@codesourcery.com>

        Unbreak 'target async'.
        * serial.c (serial_async): Set the
        handler function before enabling async
        mode.

2008-02-22  Daniel Jacobowitz  <dan@codesourcery.com>

        * solib-svr4.c (enable_break): Convert r_brk to a code address.

2008-02-21  Pedro Alves  <pedro@codesourcery.com>

        * remote.c (extended_remote_attach_1): Set attach_flag.
        (extended_remote_create_inferior_1): Clear attach_flag.

2008-02-20  Daniel Jacobowitz  <dan@codesourcery.com>

        * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Set
        r_brk_offset.
        (mipsnbsd_lp64_fetch_link_map_offsets): Likewise.
        * solib-svr4.c (solib_svr4_r_brk): New.
        (open_symbol_file_object, svr4_current_sos): Always check the
        debug base.
        (svr4_fetch_objfile_link_map): Do not set debug_base.
        (enable_break): Use r_brk if it is set.
        (svr4_ilp32_fetch_link_map_offsets): Set r_brk_offset.
        (svr4_lp64_fetch_link_map_offsets): Likewise.
        * solib-svr4.h (struct link_map_offsets): Add r_brk_offset.

2008-02-20  Markus Deuling  <deuling@de.ibm.com>
            Mark Kettenis  <kettenis@gnu.org>

        * alpha-tdep.c (alpha_heuristic_unwind_cache): Replace saved_regs by
        trad_frame_saved_reg.
        (trad-frame.h): New include. 

        (alpha_heuristic_frame_unwind_cache): Use trad_frame_alloc_saved_regs
        instead of frame_obstack_zalloc. 
        (alpha_heuristic_frame_prev_register): Use trad_frame_get_prev_register.

        * Makefile.in (alpha-tdep.o): Add dependency to trad_frame_h. 

2008-02-20  Markus Deuling  <deuling@de.ibm.com>

        * rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess
        from disassemble_info instead of gdbarch_byte_order.

        * mips-tdep.c (gdb_print_insn_mips): Likewise.
        * arm-tdep.c (gdb_print_insn_arm): Likewise.

2008-02-20  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add
        gdbarch as parameter.

        * gdbarch.{c,h}: Regenerate.

        * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as
        parameter.
        * mem-break.c (default_memory_insert_breakpoint)
        (default_memory_remove_breakpoint): Likewise.
        * target.h (default_memory_remove_breakpoint)
        (default_memory_insert_breakpoint): Likewise.

        * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as
        parameter. Replace current_gdbarch by gdbarch.
        * m32r-tdep.c (m32r_memory_insert_breakpoint)
        (m32r_memory_remove_breakpoint): Likewise.

2008-02-19  Daniel Jacobowitz  <dan@codesourcery.com>

        * MAINTAINERS: Add Vladimir Prus as MI maintainer.

2008-02-19  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Add entry describing Add support improvements.

2008-02-18  Markus Deuling  <deuling@de.ibm.com>

        * m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by
        M68K_FP0_REGNUM.

2008-02-18  Markus Deuling  <deuling@de.ibm.com>

        * sentinel-frame.c (sentinel_frame_prev_register): Do not call
        register_offset_hack anymore.

        * regcache.{c,h} (register_offset_hack): Remove.

2008-02-18  Markus Deuling  <deuling@de.ibm.com>

        * hppa-tdep.h (find_global_pointer): Add gdbarch as parameter.

        * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace
        current_gdbarch by gdbarch.
        (hppa64_hpux_find_global_pointer): Likewise.
        * hppa-tdep.c (hppa_find_global_pointer): Likewise.
        (hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for
        find_global_pointer.

        * hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as
        parameter.
        * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.

        * hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead
        of gdbarch_num_regs.

        * hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and
        replace current_gdbarch by gdbarch.     
        (hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr.

2008-02-18  Markus Deuling  <deuling@de.ibm.com>

        * rs6000-nat.c (exec_one_dummy_insn, regmap): Add gdbarch as parameter
        and replace current_gdbarch by gdbarch.

        (store_register): Update call for exec_one_dummy_insn.
        (fetch_register, store_register): Update call of regmap.

        * ppcnbsd-nat.c (getregs_supplies, getfpregs_supplies): Add gdbarch as
        parameter and replace current_gdbarch by gdbarch.
        
        (ppcnbsd_store_inferior_registers): Use get_regcache_arch to get at
        the current architecture. Update call for getregs_supplies and
        getfpregs_supplies.
        (ppcnbsd_fetch_inferior_registers): Likewise.

        * ppcobsd-nat.c (getfpregs_supplies): Add gdbarch as parameter and 
        replace current_gdbarch by gdbarch.
        (ppcobsd_fetch_registers, ppcobsd_store_registers): Use
        get_regcache_arch to get at the current architecture. Update call for
        getfpregs_supplies.

2008-02-18  Markus Deuling  <deuling@de.ibm.com>

        * arch-utils.c (gdbarch_from_bfd): Remove unnecessary {old,new}_gdbarch
        variables. 

2008-02-15  Markus Deuling  <deuling@de.ibm.com>

        * mips-linux-tdep.c (mips_linux_init_abi): Remove internal error.

2008-02-14  Vladimir Prus  <vladimir@codesourcery.com>

        * NEWS: Mention pending breakpints in MI.
        
2008-02-14  Markus Deuling  <deuling@de.ibm.com>

        * Makefile.in (ALL_TARGET_OBS): Remove dependency to xtensa-linux-nat.o.

2008-02-13  Markus Deuling  <deuling@de.ibm.com>

        Add script to build and test GDB using enable-targets=all.

        * gdb_buildall.sh: New file.

2008-02-11  Maxim Grigoriev  <maxim2405@gmail.com>

        * NEWS (New native configurations): Xtensa GNU/Linux.
        (New targets): Xtensa GNU/Linux.
        * Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
        xtensa-linux-tdep.o
        (ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
        (xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
        * configure.tgt (xtensa*-*-linux*): New entry.
        * xtensa-config.c (xtensa_tdep): New variable.
        (xtensa_config_byte_order, xtensa_config_tdep): Removed.
        (rmap): Change format based on new macro XTREG.
        (XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
        * xtensa-linux-nat.c: New.
        * xtensa-linux-tdep.c: New.
        * xtensa-xtregs.c: New.
        * xtensa-tdep.h (xtensa_elf_gregset_t): Update.
        (XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
        (XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
        (xtensa_register_t): New field coprocessor.
        (XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
        * xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
        (xtensa_pseudo_register_read, xtensa_pseudo_register_write):
        Update to handle privileged registers.
        (xtensa_supply_gregset) Remove exccause and excvaddr registers.
        (xtensa_push_dummy_call): Set windowstart register correctly.
        (call0_analyze_prologue): Initialize xtensa_default_isa.
        (xtensa_derive_tdep): New.
        (xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
        xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
        Call xtensa_derive_tdep().
        * config/xtensa/linux.mh: New.
        * regformats/reg-xtensa.dat: New.

2008-02-09  Aleksandar Ristovski  <aristovski@qnx.com>  (tiny change)

        * corelow.c (core_open): Use IS_ABSOLUTE_PATH.
        (filenames.h): New include.
        * Makefile.in (corelow.o): Add dependency for filenames.h.

2008-02-08  Doug Evans  <dje@google.com>

        * source.c (find_and_open_source): Always rewrite absolute filenames.

2008-02-07  Doug Evans  <dje@google.com>

        * breakpoint.c: #include "hashtab.h".
        (ambiguous_names_p): New fn.
        (update_breakpoint_locations): When restoring bp enable status, don't
        compare function names if any functions have same name.
        * Makefile.in (breakpoint.o): Add hashtab.h dependency.

2008-02-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (symbol_completion_add): Make SV parameter a VEC**
        instead of just a VEC*. Update use of SV.
        (ada_make_symbol_completion_list): Update symbol_completion_add calls.

2007-02-07  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Put all new commands since gdb-6.7 together.

2007-02-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c: #include "vec.h".
        (struct string_vector, new_string_vector, string_vector_append):
        Delete.
        (char_ptr): New typedef.
        (DEF_VEC_P (char_ptr)): New VEC type.
        (symbol_completion_add): Update profile to take the new VEC type
        instead of the old string_vector structure. Update code accordingly.
        (ada_make_symbol_completion_list): Use the new VEC type instead of
        the old string_vector structure, and update the code accordingly.
        * Makefile.in (ada-lang.o): Add dependency on vec.h.

2008-02-06  Pierre Muller  <muller@ics.u-strasbg.fr>

        * p-exp.y: Set current_type in missing places.
        (leftdiv_is_integer): New static variable.
        Typecast right operand of BINOP_DIV to long_double if both operands
        are integers.

2008-02-06  Maciej W. Rozycki  <macro@mips.com>

        * remote-mips.c (set_breakpoint): Rename to...
        (mips_set_breakpoint): ... this.
        (clear_breakpoint): Rename to...
        (mips_clear_breakpoint): ... this.
        (common_breakpoint): Rename to...
        (mips_common_breakpoint): ... this.
        (check_lsi_error): Rename to...
        (mips_check_lsi_error): ... this.

2007-02-05  Joel Brobecker  <brobecker@adacore.com>

        * language.h (struct language_defn): Add new field
        la_make_symbol_completion_list.
        * symtab.c (default_make_symbol_completion_list): Renames
        make_symbol_completion_list.
        (make_symbol_completion_list): New function.
        * symtab.h (default_make_symbol_completion_list): Add declaration.
        * langauge.c (unknown_language): Set la_make_symbol_completion_list.
        (auto_language, local_language): Likewise.
        * objc-lang.c (objc_language_defn): Likewise.
        * scm-lang.c (scm_language_defn): Likewise.
        * m2-lang.c (m2_language_defn): Likewise.
        * f-lang.c (f_language_defn): Likewise.
        * jv-lang.c (java_language_defn): Likewise.
        * p-lang.c (pascal_language_defn): Likewise.
        * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn)
        (minimal_language_defn): Likewise.
        * ada-lang.c (struct string_vector): New structure.
        (new_string_vector, string_vector_append, ada_unqualified_name)
        (add_angle_brackets, symbol_completion_match, symbol_completion_add)
        (ada_make_symbol_completion_list): New functions.
        (ada_language_defn): Set la_make_symbol_completion_list.
        * ada-lang.h (ada_make_symbol_completion_list): Remove declaration,
        this function is static.

2008-02-05  Kevin Buettner  <kevinb@redhat.com>

        * mn10300-tdep.c (mn10300_push_dummy_call): Adjust stack pointer
        to account for call site optimizations.

2008-02-05  Andrzej Zaborowski  <balrogg@gmail.com>

        * tracepoint.c (read_actions): Handle end-of-text indicator
        in action list properly.  (Committed by Jim Blandy)

2008-02-05  Jim Blandy  <jimb@red-bean.com>

        * ax-gdb.c (gen_expr): Yield ordinary error if asked to trace a
        pseudoregister, not an internal error.
        Reported by: Andrzej Zaborowski

2008-02-04  Vladimir Prus  <vladimir@codesourcery.com>

        * varobj.c (c_value_of_variable): Use xstrdup.

2008-02-04  Vladimir Prus  <vladimir@codesourcery.com>

        Update stored rendition of varobj value when format changes.
        * varobj.c (varobj_set_display_format): Recomputed
        print_value.
        (c_value_of_variable): Return print_value.

2008-02-03  Doug Evans  <dje@google.com>

        * eval.c (evaluate_subexp_standard): Fix type of result of mixed
        integer/float division operations when EVAL_AVOID_SIDE_EFFECTS.
        * valops.c (value_one): New function.
        * value.h (value_one): Declare.

        Fix argument promotion for binary arithmetic ops for C.
        * valarith.c (unop_result_type): New fn.
        (binop_result_type): New fn.
        (value_binop): Move result type computation to binop_result_type.
        (value_pos, value_neg, value_complement): Move result type
        computation to unop_result_type.

        PR 2384
        * gdbtypes.c (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
        Return basetype, fieldno if found.  All callers updated.
        Don't cache TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE if from different
        objfile.
        * gdbtypes.h (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
        * symfile.h (fill_in_vptr_fieldno): Delete.

2008-02-02  Doug Evans  <dje@google.com>

        * valarith.c (value_binop): Handle unsigned BINOP_REM division by zero.

        * typeprint.c (*): Whitespace cleanup.

2008-02-02  Mark Kettenis  <kettenis@gnu.org>
            Luis Machado  <luisgpm@br.ibm.com>
            Thiago Jung Bauermann  <bauerman@br.ibm.com>        

        * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Pass floats that
        don't fit into registerson the stack the way GCC does.

2008-02-01  Joel Brobecker  <brobecker@adacore.com>

        * symtab.c (symbol_set_names): Do not add an entry in the demangling
        hash table for Ada symbols. Just store the linkage name as is,
        and leave the demangled_name as NULL.

2007-02-01  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (add_partial_symbol): Always store all Ada subprograms
        in the global scope.
        (new_symbol): Likewise.

2008-02-01  Vladimir Prus  <vladimir@codesourcery.com>
        
        * breakpoint.c (break_command_1): Return void.
        (break_command_really): Return void.  Rethrow
        exceptions instead of returning.
        (gdb_breakpoint): Remove the error_message parameter.
        Return void.  Rename to set_breakpoint.
        * gdb.h (gdb_breakpoint): Rename and move to...
        * breakpoint.h (set_breakpoint): ...here.
        * mi/mi-cmb-break.c (mi_cmd_break_insert): Restore
        event hooks even if exception is thrown.  Adjust to
        gdb_breakpoint interface changes.
        

2008-02-01  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Write 32-bit
        float in both first and second word in the doubleword, to support
        old and new ABIs.

2008-02-01  Vladimir Prus  <vladimir@codesourcery.com>

        Properly rethrow exception.  This fixes errors
        about non-existent functions for -break-insert.
        * breakpoint.c (break_command_really): Use throw_exception
        for rethrowing.  If rethrowing, don't print the exception.

2008-01-31  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * NEWS: Mention Decimal Floating Point support.

2008-01-31  Joel Brobecker  <brobecker@adacore.com>

        * std-regs.c (value_of_builtin_frame_pc_reg): Change the returned
        value type to builtin_type_void_func_ptr.

2008-01-31  Andreas Krebbel  <krebbel1@de.ibm.com>

        * s390-tdep.c (is_float_singleton, is_float_like,
        alignment_of, s390_return_value): Make checks for
        TYPE_CODE_FLT to match TYPE_CODE_DECFLOAT as well.

2008-01-31  Luis Machado  <luisgpm@br.ibm.com>
            Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * infcmd.c (default_print_registers_info): Also print hex
        raw contents for TYPE_CODE_DECFLOAT registers.
        * ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member.
        * rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro.
        (rs6000_register_name): Add support for DFP pseudo-registers.
        (rs6000_pseudo_register_type): Likewise.
        rs6000_pseudo_register_reggroup_p): Likewise.
        (ppc_pseudo_register_read): New function.
        (ppc_pseudo_register_write): Likewise.
        (rs6000_pseudo_register_read): Likewise.
        (rs6000_pseudo_register_write): Likewise.
        (e500_pseudo_register_read): Move checks to
        rs6000_pseudo_register_read.
        (e500_pseudo_register_write): Move checks to
        rs6000_pseudo_register_write.
        (rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum.  Install
        rs6000_pseudo_register_read and rs6000_pseudo_register_write
        in gdbarch if SPE or DFP is available.  Adjust gdbarch's
        num_pseudo_regs to account for DFP pseudo regs.

2008-01-31  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_ev31_regnum member.
        * rs6000-tdep.c (IS_SPE_PSEUDOREG): New macro.
        (spe_register_p, rs6000_register_name, rs6000_pseudo_register_type,
        rs6000_pseudo_register_reggroup_p, e500_move_ev_register,
        e500_pseudo_register_read, e500_pseudo_register_write): Use
        IS_SPE_PSEUDOREG macro.
        (rs6000_frame_cache): Remove use of tdep->ppc_ev31_regnum.
        (rs6000_gdbarch_init): Remove unnecessary num_sprs local variable.
        Remove initialization of tdep->ppc_ev31_regnum.

2008-01-08  Paul Hilfinger  <hilfinger@adacore.com>

        * printcmd.c (print_formatted): Handle references as for unformatted
        prints.

2008-01-30  Joel Brobecker  <brobecker@adacore.com>

        * eval.c (evaluate_subexp_standard): Add handling of user
        registers when in EVAL_AVOID_SIDE_EFFECTS mode.

2008-01-30  Pierre Muller  <muller@ics.u-strasbg.fr>

        * eval.c (evaluate_subexp_standard): Support
        BINOP_INTDIV opcode.

2008-01-30  Paul N. Hilfinger  <hilfinger@adacore.com>

        * valarith.c (value_binop): Add floating-point BINOP_MIN and
        BINOP_MAX cases.
        For BINOP_EXP, use length and signedness of left operand only for
        result, as for shifts.
        For integral operands to BINOP_EXP, use new integer_pow and
        uinteger_pow functions so as to get full range of results.
        (integer_pow): New function.
        (uinteger_pow): New function.

2008-01-30  Vladimir Prus  <vladimir@codesourcery.com>

        Use vector for varobj_list_children interface.
        * gdb/varobj.c (varobj_list_children): Return vector
        of varobjs.
        * gdb/varobj.h (varobj_list_children): Adjust
        prototype.
        (varobj_p): Declare.  Declare vector thereof.
        * mi/mi-cmd-var.c (mi_cmd_var_list_children): Adjust
        for varobj_list_children change.
        * Makefile.in (varobj_h): Update dependencies.

2008-01-30  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Add support for
        TYPE_CODE_DECFLOAT arguments.
        (ppc64_sysv_abi_push_dummy_call) Likewise.
        (get_decimal_float_return_value): New function.
        (do_ppc_sysv_return_value): Add support for TYPE_CODE_DECFLOAT return
        values by calling get_decimal_float_return_value.
        (ppc64_sysv_abi_return_value): Likewise.

2008-01-30  Nick Roberts  <nickrob@snap.net.nz>

        * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file):  Add field
        for preprocessor macro information.  Formatting changes.

2008-01-29  Daniel Jacobowitz  <dan@codesourcery.com>

        * remote.c (struct remote_state): Add cached_wait_status.
        (remote_exec_file): New variable.
        (PACKET_vAttach, PACKET_vRun): New constants.
        (extended_remote_restart): Do not query for status.
        (struct start_remote_args): New.
        (remote_start_remote): Take it as a second argument.  Check
        whether the target is running.  Issue an error for non-running
        non-extended targets.  Cache the wait status.  Set inferior_ptid
        here.
        (remote_open_1): Prompt to disconnect non-running targets.  Make
        sure the target is marked running.  Do not set inferior_ptid here.
        Update call to remote_start_remote.  Do not call remote_check_symbols
        if the target is not running.
        (remote_detach_1): Rename from remote_detach.  Take an EXTENDED
        argument.  Handle a non-running target.
        (remote_detach): Use it.
        (extended_remote_detach): New.
        (remote_disconnect): Fix typo.  Use remoute_mourn_1.
        (extended_remote_attach_1, extended_remote_attach)
        (extended_async_remote_attach): New.
        (remote_vcont_resume): Remove unused variable.
        (remote_wait, remote_async_wait): Use any cached wait status.
        (putpkt_binary, getpkt): Clear any cached wait status.
        (extended_remoute_mourn_1): New.
        (extended_remote_mourn): Use it.
        (extended_async_remote_mourn, extended_remote_run): New.
        (extended_remote_create_inferior_1): New.
        (extended_remote_create_inferior): Use it.
        (extended_remote_async_create_inferior): Likewise.
        (remote_xfer_partial): Skip for non-executing targets.
        (init_extended_remote_ops): Set to_detach and to_attach.
        (init_extended_async_remote_ops): Likewise.  Use
        extended_async_remote_mourn.
        (_initialize_remote): Register vAttach, vRun, and
        set remote exec-file.
        * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.

2008-01-29  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.in (symfile.o): Update.
        * NEWS: Mention exec tracing support.
        * inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
        exec events.
        * infcmd.c (kill_if_already_running, detach_command)
        (disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
        * infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
        (follow_exec): Do not check may_follow_exec.  Do not mourn and push
        targets.  Apply the sysroot path to the loaded executable.  Use
        no_shared_libraries.
        * linux-nat.c (linux_child_follow_fork): Print fork following
        messages if verbose.
        (kill_wait_callback): Kill again before waiting a second time.
        * symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
        no_shared_libraries.

2008-01-29  Joel Brobecker  <brobecker@adacore.com>

        * amd64-tdep.c (amd64_classify): Add handling of TYPE_CODE_CHAR.

2008-01-29  Joel Brobecker  <brobecker@adacore.com>

        * nto-tdep.h: Remove #include "defs.h".
        * nto-tdep.c: Add #include "defs.h".
        * Makefile.in (nto_tdep_h): Update dependencies.
        (nto-tdep.o): Likewise.

2008-01-29  Joel Brobecker  <brobecker@adacore.com>

        * infrun.c (wait_for_inferior): Add treat_exec_as_sigtrap parameter
        and use it.
        (proceed, start_remote): Update call to wait_for_inferior.
        * inferior.h (wait_for_inferior): Update declaration.
        * fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c,
        solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior.
        * inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as
        TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED.

2008-01-29  Aleksandar Ristovski  <aristovski@qnx.com>

        * varobj (adjust_value_for_child_access): Added checking for 
        returned value from gdb_value_ind.
        (c_describe_child): Likewise.
        (cplus_describe_child): Fixed a typo.

2008-01-29  Jim Blandy  <jimb@red-bean.com>

        * MAINTAINERS: Update my info.

2008-01-29  Vladimir Prus  <vladimir@codesourcery.com>

        Use multiple locations for hardware watchpoints.
        This eliminates the need to traverse value chain, doing
        various checks, in three different places.

        * breakpoint.h (struct bp_location): New fields
        lengths and watchpoint_type.
        (struct breakpoint): Remove the val_chain field.
        * breakpoint.c (is_hardware_watchpoint): New.
        (free_valchain): Remove.
        (update_watchpoint): New.
        (insert_bp_location): For hardware watchpoint, just
        directly insert it.
        (insert_breakpoints): Call update_watchpoint_locations
        on all watchpoints.  If we have failed to insert
        any location of a hardware watchpoint, remove all inserted
        locations.
        (remove_breakpoint): For hardware watchpoints, directly
        remove location.
        (watchpoints_triggered): Iterate over locations.
        (bpstat_stop_status): Use only first location of
        a resource watchpoint.
        (delete_breakpoint): Don't call free_valchain.
        (print_one_breakpoint): Don't print all
        locations for watchpoints.
        (breakpoint_re_set_one): Use update_watchpoint for
        watchpoints.

2008-01-29  Vladimir Prus  <vladimir@codesourcery.com>

        Don't reset watchpoint block on solib load.

        * breakpoint.c (insert_bp_location): For watchpoints,
        recompute condition.
        (breakpoint_re_set_one): Instead of recomputing value
        and condition for watchpoints, just reset value and
        let insert_breakpoints/insert_bp_location recompute it.
        Don't do anything about disabled watchpoint.

2008-01-29  Pierre Muller  <muller@ics.u-strasbg.fr>

        * valarith.c (value_binop): Handle unsigned integer
        division by zero.

2008-01-28  Kevin Buettner  <kevinb@redhat.com>

        * mn10300-tdep.c (mn10300_analyze_prologue): Check for an
        instruction pattern that appears frequently in position
        independent code.  Fix bug in code which looks for "fmov" and
        backtracks if no "fmov" is found.

2008-01-28  Doug Evans  <dje@google.com>

        * dbxread.c (read_dbx_symtab): Fix indentation.
        Reformat comments to 80 columns.
        Move local var def closer to only use.

2008-01-28  Daniel Jacobowitz  <dan@codesourcery.com>

        * fork-child.c (SHELL_FILE): Remove #ifndef.
        (fork_inferior): Remove SHELL_COMMAND_CONCAT.

2008-01-25  Pierre Muller  <muller@ics.u-strasbg.fr>

        * i386-tdep.c (i386_skip_noop): New function.
        (i386_analyze_prologue): Call i386_skip_noop function.

2008-01-24  Michael Snyder  <msnyder@specifix.com>

        * procfs.c (procfs_xfer_partial): Comment, cut/paste error.
        * win32-nat.c (win32_xfer_partial): Ditto.
        * target.c (default_xfer_partial): Minor whitespace adjustment.

2008-01-24  Pedro Alves  <pedro@codesourcery.com>

        * arm-tdep.c (arm_addr_bits_remove): In non 26-bit mode, don't
        strip bit 1 even if pc doesn't point to thumb code.

2008-01-23  Daniel Jacobowitz  <dan@codesourcery.com>

        * remote.c (remote_wait): Handle SIGINT between packets.
        (remote_async_wait): Likewise.

2008-01-23  Vladimir Prus  <vladimir@codesourcery.com>
            Chris Demetriou  <cgd@google.com>

        * thread.c (add_thread_silent): Renamed
        from add_thread.
        (print_thread_events): New variable definition.
        (show_print_thread_events): New function.
        (_initialize_thread): Add "set print thread-events" and
        "show print thread-events" commands.
        (add_thread): Announce new thread.
        * gdbthread.h (add_thread_silent): Declare.
        (print_thread_events): New variable declaration.
        * inf-ttrace.c (inf_ttrace_wait): Don't
        inform about new thread, as add_thread is always
        called too, and will take care of that.
        * infrun.c (handle_inferior_event): Likewise.
        * procfs.c (procfs_wait): Likewise.
        * remote.c (remote_currthread): Likewise.
        * sol-thread.c (sol_thread_wait): Likewise.
        * win32-nat.c (get_win32_debug_event): Likewise.
        * linux-thread-db.c (attach_thread): Likewise.
        Remove the verbose parameter.
        (check_event): Make detach_thread be verbose
        only if print_thread_events is set.
        * linux-nat.c (lin_lwp_attach_lwp): Don't inform
        about new thread.  This is called only from
        linux-thread-db.c:attach_thread, which will take care.
        Remove the verbose parameter.
        * linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.

2008-01-23  Nick Roberts  <nickrob@snap.net.nz>

        * mi/mi-cmd-var.c (mi_cmd_var_set_format): Add value field to output.

2008-01-22  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (break_command_really): New parameter
        ignore_count.
        (break_command_1): Pass 0 as
        ignore_count to break_command_really.
        (gdb_breakpoint): Pass ignore_count to
        break_command_really.

2008-01-21  Kevin Buettner  <kevinb@redhat.com>

        * mn10300-linux-tdep.c (am33_linux_sigframe_cache_init): Find
        sigcontext struct via pointer.
        (struct sigframe comment): Update to show new field `psc'.

2008-01-21  Vladimir Prus  <vladimir@codesourcery.com>

        * infrun.c (handle_inferior_event): If
        we failed to remove breakpoints, error,
        don't try to increment PC by hand.

2008-01-18  Nick Hudson  <nick.hudson@dsl.pipex.com>

        Add NetBSD/hppa target and host support.

        * hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
        (hppabsd_gregset): Move to ...
        (hppabsd_regset_from_core_section): Rename
        hppaobsd_regset_from_core_section and move to ...
        (hppabsd_find_global_pointer): Update comment.
        (hppabsd_init_abi): Make global. Do not register
        hppabsd_regset_from_core_section.
        (hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
        move to ...
        (_initialize_hppabsd_tdep): Move to ...
        * hppaobsd-tdep.c: ... here. New file.
        * hppnbsd-tdep.c: New file.
        * hppnbsd-nat.c: New file.
        * Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
        (ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
        (hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
        (hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
        * configure.host (hppa*-*-netbsd*): New entry.
        * configure.tgt (hppa*-*-netbsd*): New entry.
        (hppa*-*-openbsd*): Update.
        * NEWS (New native configuration): Mention NetBSD/hppa.
        (New targets): Mention NetBSD/hppa.

2008-01-18  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (function_list): Add new property bits_big_endian to
        gdbarch structure.
        * gdbarch.{c,h}: Regenerate.

        * value.c (struct value): Replace BITS_BIG_ENDIAN by
        gdbarch_bits_big_endian (comment).
        (unpack_field_as_long, modify_field): Likewise.
        * value.h: Likewise (comment).
        * valops.c (value_slice): Likewise.
        * valarith.c (value_subscript, value_bit_index): Likewise.
        * gdbtypes.h (field): Likewise (comment).
        * eval.c (evaluate_subexp_standard): Likewise.
        * dwarf2read.c (dwarf2_add_field): Likewise.
        * ada-lang.c (decode_packed_array, ada_value_primitive_packed_val)
        (move_bits, ada_value_assign, value_assign_to_component): Likewise.
        
        * defs.h (BITS_BIG_ENDIAN): Remove.

2008-01-18  Markus Deuling  <deuling@de.ibm.com>

        * jv-exp.y (yylex): Replace DEPRECATED_STREQN with the appropriate
        function calls.
        * m2-exp.y (yylex): Likewise.
        * objc-exp.y (yylex): Likewise.

        * defs.h (DEPRECATED_STREQN): Remove.

2008-01-17  H.J. Lu  <hjl.tools@gmail.com>

        * MAINTAINERS: Update my email address.

2008-01-17  Jim Blandy  <jimb@codesourcery.com>

        * README: Mention gdbserver/README.

2008-01-17  Pierre Muller  <muller@ics.u-strasbg.fr>

        * valarith.c (value_binop): Handle BINOP_INTDIV
        for unsigned and signed integers.

2008-01-17  Ulrich Weigand  <uweigand@de.ibm.com>

        * s390-tdep.c (s390_gdbarch_init): Set default long double
        type to 128-bit IEEE quad.

2008-01-17  Joel Brobecker  <brobecker@adacore.com>

        * hpux-thread.c (hpux_thread_resume): Delete commented-out code.

2008-01-16  Mark Kettenis  <kettenis@gnu.org>

        * auxv.c (fprint_target_auxv): Add support for AT_SUN_AUXFLAGS.

        * dfp.c, dfp.h: Rename decimal_to_double to decimal_to_doublest.
        * value.c: All callers changed.

2008-01-16  Markus Deuling  <deuling@de.ibm.com>

        * rs6000-nat.c (add_vmap, vmap_ldinfo, vmap_exec): Replace
        DEPRECATED_STREQ by its expression.
        * coffread.c (coff_locate_sections, coff_symtab_read): Likewise.
        * xcoffread.c (read_xcoff_symtab, read_symbol_lineno, find_linenos)
        (scan_xcoff_symtab): Likewise.
        * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Likewise.
        * f-lang.c (find_common_for_function): Likewise.
        * objc-exp.y (parse_number): Likewise.

        * defs.h (DEPRECATED_STREQ): Remove.

2008-01-16  Markus Deuling  <deuling@de.ibm.com>

        * mn10300-tdep.h (AM33_MODE): Add gdbarch as parameter.
        * mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use
        get_frame_arch to get at the current_architecture. Update AM33_MODE
        call.
        (mn10300_analyze_prologue): Add gdbarch as parameter. Update caller.
        (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
        architecture.
        (set_reg_offsets, mn10300_analyze_prologue): Fix indentation.

2008-01-16  Markus Deuling  <deuling@de.ibm.com>

        * amd64-nat.h (amd64_native_gregset_supplies_p): Add gdbarch as 
        parameter.
        * amd64-nat.c (amd64_native_gregset_supplies_p): Likewise.

        (amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace
        current_gdbarch by gdbarch. Update caller.

        * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers)
        (amd64_linux_store_inferior_registers): Use get_regcache_arch to get at
        the current architecture. Update calls of
        amd64_native_gregset_supplies_p.
        * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers)
        (amd64bsd_store_inferior_registers): Likewise.

2008-01-16  Markus Deuling  <deuling@de.ibm.com>

        * ppc-linux-nat.c (ppc_register_u_addr): Add gdbarch as parameter.
        Replace current_gdbarch by gdbarch. Update caller.

2008-01-16  Markus Deuling  <deuling@de.ibm.com>

        * dbxread.c (repeated_header_complaint, dbx_symfile_init)
        (read_dbx_dynamic_symtab, function_outside_compilation_unit_complaint)
        (read_dbx_symtab, end_psymtab, dbx_psymtab_to_symtab_1)
        (dbx_psymtab_to_symtab, read_ofile_symtab, process_one_symbol)
        (stabsect_build_psymtabs): Fix indentation.

2008-01-15  Michael Snyder  <msnyder@specifix.com>

        * corelow.c (core_xfer_partial): Comment, cut/paste error.

2008-01-14  Pierre Muller  <muller@ics.u-strasbg.fr>

        * win32-nat.c (win32_create_inferior): Restore code calling
        CloseHandle on ProcessInformation structure.

2008-01-13  Nick Hudson  <nick.hudson@dsl.pipex.com>

        * configure.ac: Check for void * as 3 argument of ptrace.
        * configure: regenerate.

2008-01-11  Markus Deuling  <deuling@de.ibm.com>

        * alpha-tdep.c (alpha_heuristic_proc_start)
        (alpha_sigtramp_register_address): Add gdbarch as parameter. Replace
        current_gdbarch by gdbarch.

        (alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the
        current architecture by frame_info. Update alpha_heuristic_proc_start 
        call.

        (alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use
        get_frame_arch to get at the current architecture by frame_info. Update
        alpha_sigtramp_register_address call.

        * arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace
        current_gdbarch by gdbarch. Update caller.
        (convert_to_extended, convert_from_extended): Add endianess parameter
        for comparison. Update caller.
        (arm_extract_return_value, arm_store_return_value): Use
        get_regcache_arch to get at the current architecture.

        * cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace
        current_gdbarch by gdbarch. Update caller.
        (cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add
        gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch.

        * h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add
        gdbarch as parameter. Update caller.    
        (h8300_init_frame_cache): Add gdbarch as parameter. Replace
        current_gdbarch by gdbarch. Update caller.

        * hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and 
        update caller. Replace current_gdbarch by gdbarch.

        * m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at
        the current architecture. Replace current_gdbarch by gdbarch.
        * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
        (STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its
        expression. Add gdbarch as parameter and replace current_gdbarch with
        it. Update caller.
        (M6811_TDEP): Remove.
        (m68hc11_frame_prev_register): Use get_frame_arch to get at the current
        architecture.
        (m68hc11_scan_prologue): Add gdbarch as parameter. Replace 
        current_gdbarch by gdbarch. Update caller.

        * m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and
        update caller.
        (m68k_analyze_register_saves): Likewise. Also replace current_gdbarch
        by gdbarch.

        * rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update
        caller. Relace current_gdbarch by gdbarch.
        (altivec_register_p, spe_register_p): Likewise.
        * ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as
        parameter.
        * ppc-linux-nat.c (fetch_register, store_register): Update caller of
        altivec_register_p and spe_register_p.

        * score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update 
        caller. Replace current_gdbarch by gdbarch.
        (score_analyze_prologue): use get_frame_arch to get at the current
        architecture.   

        * sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter.
        * sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace
        current_gdbarch by gdbarch. Update caller.
        (sparc_frame_cache): Use get_frame_arch to get at the current
        architecture.
        * sparce64-tdep.c (sparc64_skip_prologue): Update call of
        sparc_analyze_prologue.

        * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as
        parameter.

2008-01-11  Markus Deuling  <deuling@de.ibm.com>

        * exec.c: #include "arch-utils.h"
         (print_section_info): Use gdbarch_from_bfd to get at the
        current architecture. Replace current_gdbarch. Fix indention. Replace
        deprecated_print_address_numeric by paddress.
        * Makefile.in (exec.o) Add dependency to arch-utils.h.

        * valprint.c (val_print_string): Replace 
        deprecated_print_address_numeric.
        * tracepoint.c (trace_mention, scope_info): Likewise.
        * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol)
        (print_symbol, print_partial_symbols, maintenance_info_psymtabs)
        (maintenance_check_symtabs): Likewise.
        * symfile.c (list_overlays_command): Likewise.
        * stack.c (frame_info, print_block_frame_labels): Likewise.
        * printcmd.c (print_address, print_address_demangle)
        (address_info): Likewise.
        * corefile.c (memory_error): Likewise.
        * infcmd.c (jump_command): Likewise.
        * breakpoint.c (insert_bp_location, describe_other_breakpoints)
        (mention, delete_breakpoint): Likewise.
        * c-valprint.c (print_function_pointer_address, c_val_print): Likewise.
        * dwarf2read.c (dump_die): Likewise.
        * ada-valprint.c (ada_val_print_1): Likewise.
        * f-valprint.c (f_val_print): Likewise.
        * linux-fork.c (info_forks_command): Likewise.  
        * m32r-com.c (m32r_load_section, m32r_load)
        (m32r_upload_command): Likewise.

        * ui-out.c (ui_out_field_core_addr): Remove unnecessary comment.

2008-01-11  Markus Deuling  <deuling@de.ibm.com>

        * gdbarch.sh (skip_prologue): Add gdbarch
        as parameter.
        * gdbarch.{c,h}: Regenerate.

        * alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter.
        * amd64-tdep.c (amd64_skip_prologue): Likewise.
        * avr-tdep.c (avr_skip_prologue): Likewise.
        * cris-tdep.c (cris_skip_prologue): Likewise.
        * frv-tdep.c (frv_skip_prologue): Likewise.
        * h8300-tdep.c (h8300_skip_prologue): Likewise.
        * hppa-tdep.c (hppa_skip_prologue): Likewise.
        * i386-tdep.c (i386_skip_prologue): Likewise.
        * ia64-tdep.c (ia64_skip_prologue): Likewise.
        * iq2000-tdep.c (iq2000_skip_prologue): Likewise.
        * m32r-tdep.c (m32r_skip_prologue): Likewise.
        * m68hc11-tdep.c (m68hc11_skip_prologue): Likewise.
        * m68k-tdep.c (m68k_skip_prologue): Likewise.
        * m88k-tdep.c (m88k_skip_prologue): Likewise.
        * mep-tdep.c (mep_skip_prologue): Likewise.
        * mips-tdep.c (mips_skip_prologue): Likewise.
        * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
        * mt-tdep.c (mt_skip_prologue): Likewise.
        * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
        * score-tdep.c (score_skip_prologue): Likewise.
        * sh64-tdep.c (sh64_skip_prologue): Likewise.
        * sh-tdep.c (sh_skip_prologue): Likewise.
        * sparc64-tdep.c (sparc64_skip_prologue): Likewise.
        * sparc-tdep.c (sparc32_skip_prologue): Likewise.
        * spu-tdep.c (spu_skip_prologue): Likewise.
        * v850-tdep.c (v850_skip_prologue): Likewise.
        * vax-tdep.c (vax_skip_prologue): Likewise.
        * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
        * xtensa-tdep.c (xtensa_skip_prologue): Likewise.

        * arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace
        current_gdbarch by gdbarch.
        * m32c-tdep.c (m32c_skip_prologue): Likewise.
        * s390-tdep.c (s390_skip_prologue): Likewise.

2008-01-10  Doug Evans  <dje@google.com>

        * defs.h (struct continuation_arg): Fix typo in comment.
        * target.c (target_translate_tls_address): Fix comment spelling error.

2008-01-09  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * doublest.h (DOUBLEST_PRINT_FORMAT): Remove % from string.
        (DOUBLEST_SCAN_FORMAT): Likewise.
        * dfp.c (decimal_from_floating): Use DOUBLEST_PRINT_FORMAT.
        * ada-lex.l (processReal): Prepend "%" to use of DOUBLEST_SCAN_FORMAT.
        * c-exp.y (parse_number): Likewise.
        * jv-exp.y (parse_number): Likewise.
        * objc-exp.y (parse_number): Likewise.
        * p-exp.y (parse_number): Likewise.

2008-01-09  Joel Brobecker  <brobecker@adacore.com>

        * gdbtypes.c (create_array_type): Add handling of null Ada arrays.
        (check_typedef): Likewise.

2008-01-09  Luis Machado  <luisgpm@br.ibm.com>

        * printcmd.c (printf_command): Add seen_big_h, seen_big_d and
        seen_double_big_d, treat the new H, D, and DD modifiers as length
        modifiers.

2008-01-08  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (read_enumeration_type): Add comment.

2008-01-08  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * config.in: Regenerate.

2008-01-08  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_convert_actual): Renames convert_actual.
        Make non-static.
        (ada_convert_actuals): Delete.
        * ada-lang.h (ada_convert_actual): Add declaration.
        (ada_convert_actuals): Remove declaration.
        * infcall.c: #include "ada-lang.h".
        (value_arg_coerce): Add new parameter sp.  Update function
        documetnation.  Add handling of Ada function call parameters.
        * Makefile.in (infcall.o): Update dependencies.

2008-01-08  Paul Hilfinger  <hilfinger@adacore.com>

        * ada-lang.c (ensure_lval): Fix value lval kind.
        (convert_actual): Add handling for arguments passed by reference.

2008-01-08  Doug Evans  <dje@google.com>

        * dbxread.c (read_dbx_symtab): Fix indentation.

2008-01-07  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * Makefile.in (dfp.o): Depend on expression.h, gdbtypes.h and value.h.
        (valarith.o): Depend on dfp.h.
        (valops.o): Likewise.
        * dfp.c: Include expression.h, gdbtypes.h, value.h and dfp.h.
        (set_decnumber_context): New function.
        (decimal_check_errors): Likewise.
        (decimal_from_number): Likewise.
        (decimal_to_number): Likewise.
        (decimal_from_string): Use set_decnumber_context and
        decimal_check_errors.
        (decimal_from_integral): New function.
        (decimal_from_floating): Likewise.
        (decimal_to_double): Likewise.
        (promote_decimal): Likewise.
        (decimal_binop): Likewise.
        (decimal_is_zero): Likewise.
        (decimal_compare): Likewise.
        (decimal_convert): Likewise.
        * dfp.h (decimal_from_integral): New prototype.
        (decimal_from_floating): Likewise.
        (decimal_to_double): Likewise.
        (decimal_binop): Likewise.
        (decimal_is_zero): Likewise.
        (decimal_compare): Likewise.
        (decimal_convert): Likewise.
        * eval.c (evaluate_subexp_standard): Remove expect_type argument from
        call to value_from_decfloat.
        * valarith.c: Include dfp.h.
        (value_args_as_decimal): New function.
        (value_binop): Add if block to handle TYPE_CODE_DECFLOAT values.
        (value_logical_not): Likewise.
        (value_equal): Likewise.
        (value_less): Likewise.
        (value_pos): Likewise.
        (value_neg): Formatting fix.
        * valops.c: Include dfp.h.
        (value_cast): Add if block to handle TYPE_CODE_DECFLOAT values.
        * value.c (unpack_long): Add case to handle TYPE_CODE_DECFLOAT.
        (unpack_double): Add if block to handle TYPE_CODE_DECFLOAT.
        (value_from_decfloat): Remove expect_type argument.
        * value.h (value_from_decfloat): Update prototype.

2008-01-07  Vladimir Prus  <vladimir@codesourcery.com>

        Ignore change in name of dynamic linker during
        execution on Solaris.  This also unbreaks pending breakpoints.

        * solist.h (struct target_so_ops): New field same.
        * solib-svr4.c (svr4_same): New.
        (_initialize_svr4_solib): Register svr4_same.
        * solib.c (update_solib_list): Use ops->same, if available.

2008-01-06  Christopher Faylor  <me+cygwin@cgf.cx>

        * win32-nat.c (win32_make_so): Use cygwin-style path to avoid warnings
        when using MS-DOS paths.

2008-01-05  Pedro Alves  <pedro@codesourcery.com>

        * NEWS: Mention --pid and --core command line behaviour changes.

2008-01-05  Pedro Alves  <pedro@codesourcery.com>

        * main.c (captured_main): Remove 'count' varible and the
        ALIGN_STACK_ON_ENTRY block that used it.  Error out if --core and
        --pid options were issued simultaneously.  If an explicit pid
        option was passed, don't fallback to core file.  Detect extra
        arguments better in the presence of explicit pid or core
        arguments.

2008-01-05  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_which_variant_applies): Correctly compute
        the value of the discriminant when the variant record is packed.

2008-01-04  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (is_name_suffix): Handle middle-name numeric suffixes
        that are used to differentiate homonyms.

2008-01-04  Jerome Guitton  <guitton@adacore.com>

        * ada-lang.c (decode_packed_array_type): Avoid a seg fault
        when the type is an anonymous pointer type.
        (ada_check_typedef): Avoid a seg fault when the type is null.
        * ada-typeprint.c (print_array_type): Add support for pointer
        to packed arrays.

2008-01-04  Paul N. Hilfinger  <hilfinger@adacore.com>

        * ada-exp.y: Allow '{type} ADDRESS' notation on left of assignment.

2008-01-04  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_evaluate_subexp): Evaluate tagged types in
        EVAL_NORMAL mode when noside is EVAL_AVOID_SIDE_EFFECTS.

2008-01-04  Joel Brobecker  <brobecker@adacore.com>

        * ada-exp.y (chop_separator): New function.
        (write_selectors): Rewrite to re-use chop_separator.
        (ada_nget_field_index, get_symbol_field_type): New functions.
        (write_var_or_type): Add support for "ptype TYPENAME.FIELD"
        expressions.

2008-01-03  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * symtab.c (find_pc_sect_line): Use SYMBOL_VALUE_ADDRESS instead
        of SYMBOL_VALUE when working with function symbols.

2008-01-03  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (resolve_subexp): Add handling of OP_REGISTER
        expressions.  These expressions do not need to be rewriten.

2008-01-03  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (read_enumeration_type): Flag type as stub if
        the given die is a declaration.

2008-01-03  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_array_bound_from_type): Make non-static.
        Handle properly the case when the index type is an enumerated type.
        Do not return the subtype of the bounds type, just return the
        bounds type directly - this is not needed and is more consistent
        with what we do for arrays when no XA parallel type exists.

2008-01-03  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (static_unwrap_type): Add forward declaration.
        (template_to_static_fixed_type): Fields of dynamic types sometimes
        also need to be unwrapped. Take this into account.
        (ada_to_fixed_type_1): Renamed from ada_to_fixed_type.
        (ada_to_fixed_type): New wrapper around ada_to_fixed_type_1.
        * ada-typeprint.c (ada_print_type): Get the typename from
        the original type, not the base type. 

2008-01-03  Jerome Guitton  <guitton@adacore.com>

        * ada-lang.c (ada_value_struct_elt, to_fixed_array_type)
        (to_fixed_array_type, ada_to_fixed_value_create, unwrap_value): 
        Update calls to ada_to_fixed_type.
        (ada_template_to_fixed_record_type_1): Ditto, but without looking
        for the tag.
        (ada_to_fixed_type): Add check_tag parameter; do not look for
        tag if null.  When looking for a tag, use a fixed record type.
        * ada-lang.h (ada_to_fixed_type): Add check_tag parameter.
        * ada-valprint.c (printable_val_type, ada_value_print): Update
        calls to ada_to_fixed_type.

2008-01-03  Luis Machado  <luisgpm@br.ibm.com>

        * doublest.c (convert_floatformat_to_doublest): Call 
        floatformat_to_doublest instead of floatformat_to_double and use
        DOUBLEST variables.
        (convert_doublest_to_floatformat): Call floatformat_from_doublest
        instead of floatformat_from_double and use DOUBLEST variables.

2008-01-03  Nick Hudson  <nick.hudson@dsl.pipex.com>

        * MAINTAINERS (Write After Approval): Add self.

2008-01-03  Joel Brobecker  <brobecker@adacore.com>

        * symfile.c (set_initial_language): Make non-static.
        * symfile.h (set_initial_language): Add declaration.
        * language.c: #include "symfile.h".
        (set_language): Call set_initial_language if the frame language
        could not be determined.

2008-01-03  Paul N. Hilfinger  <hilfinger@adacore.com>

        * eval.c (evaluate_subexp_for_address): Provide frame address to
        locate_var_value only if it will be needed.

2008-01-02  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * linux-nat.c (linux_child_follow_fork): Call also CHECK_FOR_THREAD_DB.

2008-01-02  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_evaluate_subexp): Modify the value returned
        when noside is EVAL_AVOID_SIDE_EFFECTS to be an lval_memory.
        This is needed to make sure that any other treatment applied
        to the resulting value does not fail for spurious reason,
        such as trying to take the address of this value.

2008-01-02  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_value_equal): Dereference reference types when
        comparing arrays.
 
2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>

        Updated copyright notices for most files.

2008-01-01  Christopher Faylor  <me+gdb@cgf.cx>

        * win32-nat.c (psapi_module_handle): Remove static.
        (get_module_name): Rename from psapi_get_dll_name.  Revamp slightly to
        return first module found if base_address is zero.  Don't initialize
        psapi function pointers here.  Convert to cygwin paths when
        appropriate.
        (win32_pid_to_exec_file): Use Cygwin's /proc interface to determine
        executable name.  Use get_module_name when that fails or when
        !__CYGWIN__.
        (_initialize_psapi): New function.  Initialize psapi stuff before it is
        needed or issue a warning if it is not found.  Move psapi_module_handle
        here.

2008-01-01  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_remove_trailing_digits): New function.
        (ada_remove_po_subprogram_suffix): New function.
        (ada_decode): Improve. Move the description of the algorithm
        directly inside the code, instead of in the function global
        description.

2008-01-01  Joel Brobecker  <brobecker@adacore.com>

        * ada-valprint.c (ada_val_print_1) [TYPE_CODE_REF]: Ignore deref_ref
        and always print the dereferenced value.

2008-01-01  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_evaluate_subexp, case BINOP_SUB): Add handling
        of the case where the first argument is a reference.
        (ada_evaluate_subexp, case BINOP_ADD): Likewise.

2008-01-01  Joel Brobecker  <brobecker@adacore.com>

        Implement support for Ada interface types.

        * ada-lang.c (ada_is_dispatch_table_ptr_type): New function.
        (ada_is_ignored_field): Ignore fields that are a dispatch table
        of a tagged type.

2008-01-01  Joel Brobecker  <brobecker@adacore.com>

        * top.c (print_gdb_version): Update copyright year.

2008-01-01  Joel Brobecker  <brobecker@adacore.com>

        * ChangeLog-2007: New ChangeLog rotation.
        * ChangeLog: Reset for 2008.
        * config/djgpp/fnchange.lst: Add entries for ChangeLog-2006 and
        ChangeLog-2007.

For older changes see ChangeLog-2007.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: