1 Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3 * Makefile.in (ALLPARAM): Add config/nm-lynx.h.
5 Fri Jan 14 11:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
7 * remote-mips.c (mips_request, mips_wait): Correct prototypes.
9 Fri Jan 14 11:37:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
11 * config/i386/xm-linux.h: Define HAVE_TERMIOS.
13 Fri Jan 14 01:04:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
15 * config/alpha/tm-alpha.h (CALL_DUMMY): Improve comment.
17 Thu Jan 13 10:32:38 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
19 * remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
20 is defined. Otherwise just report TARGET_SIGNAL_UNKNOWN.
22 * mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
25 Add search to target vector (#if 0'd until after 4.12):
26 * target.h (to_search, target_search): Add.
27 * gdbcore.h, core.c (generic_search): Add.
28 * remote.c (remote_search): Add.
29 * a29k-tdep.c (init_frame_info): Use target_search to find traceback
32 * printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
33 is on, call find_pc_function rather than relying just on the minimal
34 symbols (probably only matters for symbol readers which don't put
35 statics in the minimal symbols, but changing this strikes me as
36 not conservative enough).
37 Initialize name_location in all cases.
38 If no symbol and no msymbol, don't print anything symbolic.
40 * a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.
42 Wed Jan 12 20:53:16 1994 John Gilmore (gnu@cygnus.com)
44 * printcmd.c (print_address_symbolic): Make it search the
45 symtabs for variables as well as functions. Add `set print
46 fast-symbolic-addr' and default it to fast (the old way).
47 Print line numbers for data items as well as functions.
49 * symtab.c (find_addr_symbol): Return the symtab and the symbol
50 address, if a symbol is found (take two more args pointing to
51 where to store these results).
53 * symtab.h (find_addr_symbol): Add prototype.
55 Wed Jan 12 19:32:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
57 * objfiles.h: Fix comments to reflect the fact that the phrase
58 "top of stack" always refers to where the pushing and popping takes
59 place, regardless of whether it is at the highest or lowest address.
61 Wed Jan 12 13:23:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
63 * mdebugread.c (parse_symbol): Do not set TYPE_TAG_NAME for
64 compiler generated tag names.
65 * mdebugread.c (parse_type): Handle cross references to qualified
67 * valops.c (value_struct_elt): Improve error message if the
68 address of a method is requested from an object instance.
69 * valops.c (search_struct_method): Make name_matched non-static
70 to get it initialized correctly.
71 * config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER): Define to
72 exclude segment register which are not writable on newer SCO versions.
74 Wed Jan 12 14:44:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
76 * go32-xdep.c: Remove unused function uerror.
77 (sigsetmask): Declare return type. Declare argument (to match the
78 way it is called). Explicitly return 0.
80 Wed Jan 12 01:44:25 1994 John Gilmore (gnu@cygnus.com)
82 * symtab.h (struct symbol, general_symbol_info, minimal_symbol,
83 partial_symbol): Shrink the storage sizes of symbols, by making
84 enums into 1-byte bitfields when compiled __GNUC__, moving all the
85 enums and small ints to the end of each struct to improve
86 alignment, and switching the section number from int to unsigned
89 Wed Jan 12 00:16:26 1994 John Gilmore (gnu@cygnus.com)
91 * symtab.c (find_addr_symbol): New routine that will find the nearest
92 symbol associated with an address. It does so by exhaustive
93 search of the symtabs, so it's slow but complete.
95 Tue Jan 11 23:57:30 1994 John Gilmore (gnu@cygnus.com)
97 * coffread.c (read_coff_symtab): Set PC bounds of _globals_ symtab
98 to [0,0] rather than [0, end of first source file]. This avoids
99 problems with other parts of GDB looking for linetables in the
100 _globals_ symtab. Eliminate variables num_object_files and
101 first_object_file_end.
103 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
105 * a29k-tdep.c (init_frame_info): Cast null arg to examine_tag.
106 (pop_frame): Restore PC2 and LR0 from dummy frames.
107 (push_dummy_frame): Save PC2 and LR0 into dummy frames.
108 (setup_arbitrary_frame): Handle 3 args and set up real frames.
109 * config/a29k/tm-a29k.h (FRAME_NUM_ARGS): Update comments.
110 (DUMMY_FRAME_RSIZE): Add 2 longwords for PC2 and LR0.
111 (SETUP_ARBITRARY_FRAME): Define.
113 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
115 * infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.
117 Tue Jan 11 14:27:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
119 * remote-udi.c (udi_resume): Correct prototype.
121 Tue Jan 11 11:10:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
123 * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
124 hppa_frame_find_saved_regs.
125 * hppa-tdep.c (dig_fp_from_stack): Delete function.
126 (prologue_inst_adjust_sp): New function.
127 (is_branch, inst_saves_gr, inst_saves_fr): New functions.
128 (skip_prologue): Completely rewrite to use unwind information.
129 (hppa_frame_find_saved_regs): Likewise.
131 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
133 * remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
134 to convert a signal number with appropriate bounds checking.
136 * remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).
138 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
140 * stack.c (frame_info): If FRAME_FIND_SAVED_REGS isn't defined,
141 print a newline to end the display anyway.
143 * sparc-tdep.c (sparc_pop_frame): Pop the fsr and csr (float and
144 coprocessor status regs) when popping a frame. This fixes
145 float exceptions that occur after calling inferior functions.
147 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
148 Read and write the fsr (float status register) to/from the child
149 process along with the float regs. Remove Peter Schauer's change
150 of May 24 '93, which has higher overhead and doesn't solve the
151 real problem (which was that FSR wasn't being set).
153 Mon Jan 10 23:16:42 1994 John Gilmore (gnu@cygnus.com)
155 * a29k-tdep.c (examine_prologue): Don't worry if the ASGEQ
156 stack overflow check isn't right after the register stack
157 adjustment instruction. Metaware R2.3u compiler moves other
158 things in front of it. This fix isn't perfect but is what's
161 Mon Jan 10 20:08:23 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
163 * c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.
165 * config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
167 * configure.in: Change accordingly.
169 Mon Jan 10 15:48:36 1994 Tom Lord (lord@rtl.cygnus.com)
171 * m68k-stub.c, sparc-stub.c: removed spurious introduction of
172 _filtered io routines from these two files.
174 Fri Jan 7 12:42:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
176 * config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
177 config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET): Define.
178 * mdebugread.c (parse_symbol): Handle enum sh.type produced by
180 * mdebugread.c (add_line): Handle zero linenos produced by DEC c89.
182 Fri Jan 7 12:55:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
184 * utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
185 printing to gdb_stderr.
187 * remote-udi.c (udi_kill): Don't close the connection, just set
188 inferior_pid to zero.
189 (udi_mourn): Call remove_breakpoints.
191 * remote-udi.c: Remove obsolete need_artificial_traps comment.
193 * i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.
195 Thu Jan 6 07:17:53 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
197 * symtab.c (lookup_symbol): Don't try adding .c to the name.
199 * remote-bug.c: At the start of each section, reset srec_frame
202 * target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
203 * target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
204 * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
205 code which looks for those two waitkinds. Use switch statement.
206 * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
207 CHILD_SPECIAL_WAITSTATUS.
209 * procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
210 * Move target_signal_from_host, target_signal_to_host, and
211 store_waitstatus from inftarg.c to target.c. procfs needs them.
212 * target.c: Include "wait.h" and <signal.h>.
213 * target.h, infrun.c (proceed), proceed callers: Pass new code
214 TARGET_SIGNAL_DEFAULT instead of -1. This avoids problems with
215 enums being treated as unsigned and is cleaner.
216 * infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
218 * infcmd.c (signal_command), infrun.c (signals_info):
219 Don't allow user to specify numeric equivalent of
220 TARGET_SIGNAL_DEFAULT.
222 Tue Jan 4 15:34:36 1994 Stu Grossman (grossman@cygnus.com)
224 * config/alpha/alpha-netware.mt: New target support for Alpha
226 * configure.in: Add alpha-*-netware* target.
228 Tue Jan 4 14:51:35 1994 Stan Shebs (shebs@andros.cygnus.com)
230 * remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.
232 Tue Jan 4 09:47:14 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
234 * target.h: Add enum target_waitkind, enum target_signal, and
235 struct target_waitstatus. Change status argument to target_wait to
236 be struct target_waitstatus * instead of int *.
237 * target.h, infrun.c, all targets: Change type of signal arguments
238 to resume(), proceed(), and target_resume() from int to enum
240 * All targets (*_wait, *_resume): Change accordingly.
241 * infcmd.c (program_info, signal_command), throughout infrun.c,
242 * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
243 * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
244 signal code stuff right with the new signals would be non-trivial).
245 * inferior.h (stop_signal): Make it enum target_signal not int.
246 * target.c, target.h (target_signal_to_string, target_signal_to_name,
247 target_signal_from_name): New functions.
248 * inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
249 store_waitstatus): New functions.
250 * procfs.c (procfs_notice_signals): Use them.
251 * i960-tdep.c (i960_fault_to_signal): New function, to replace
253 * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
255 * objfiles.c (build_objfile_section_table): Don't abort() if
256 objfile->sections is already set.
258 * objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
259 to match recent change to exec.c.
263 * main.c (print_gdb_version): Change year to 1994.
265 * ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
266 * Makefile.in (NONSRC): Add ChangeLog-93.
268 Mon Jan 3 11:57:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
270 * stabsread.c (read_type): Allow defining several type numbers
271 at once (e.g. "(1,2)=(3,4)="...).
273 * stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).
275 * breakpoint.c (frame_in_dummy): Check PC as well as frame.
277 Mon Jan 3 02:47:03 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
279 * mdebugread.c (psymtab_to_symtab_1): Only pass N_STAB symbols
280 to process_one_symbol.
281 * symtab.c (find_pc_psymbol): Search global_psymbols as well to
282 avoid caching a bad endaddr in find_pc_partial_function.
284 Sun Jan 2 21:41:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
286 * config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.
288 Sat Jan 1 04:35:23 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
290 * infrun.c (wait_for_inferior): Do not step or step resume past
291 the end of a one-line function we just stepped into.
293 For older changes see ChangeLog-93
299 version-control: never