2 Fri Jun 2 11:17:23 1995 Doug Evans <dje@canuck.cygnus.com>
4 * arc-tdep.c (arc_bfd_mach_type): New static global.
5 (codestream_fill): Handle byte order differences.
6 (setup_prologue_scan): Don't read stdarg function's "sub sp,sp,N".
7 (arc_get_frame_setup): Read it here.
8 (arc_frame_saved_pc): And here.
9 (arc_print_insn): New function.
10 (arc_set_cpu_type): Set arc_bfd_mach_type. Don't set tm_print_insn.
11 (_initialize_arc_tdep): Set tm_print_insn to arc_print_insn.
14 Wed May 31 12:04:01 1995 J.T. Conklin <jtc@rtl.cygnus.com>
16 * nlm/{configure.in, Makefile.in}: Converted to use autoconf.
17 * nlm/configure: New file, generated with autoconf 2.3.
19 * nlm/configure.in: Use sed instead of awk to get the value of
20 cpufile. Awk is not a utility required by the GNU coding
21 standards. This change also fixes the rigid whitespace
22 requirements that were required for awk.
24 * sparclite/aload.c: Use a file descriptor instead of a stdio
25 stream for i/o with target board.
26 Use #error if HAVE_TERMIOS is not defined.
28 * sparclite/{Makefile.in, configure.in}: Converted to use
30 * sparclite/configure: New file, generated with autoconf 2.3.
32 Sun May 28 23:10:07 1995 Jeff Law (law@snake.cs.utah.edu)
34 * defs.h: Include either varargs.h or stdarg.h (for va_list).
35 Fix stupid thinko in last change ("..." -> "va_list").
37 * defs.h (vprintf_filtered declaration): Add PARAMS prototype;
38 gcc-2.5 chokes on format attributes for unprototyped functions.
39 (vfprintf_filtered declaration): Likewise.
40 (vprintf_unfiltered declaration): Likewise.
41 (vfprintf_unfiltered). Likewise.
43 Sat May 27 23:54:17 1995 J.T. Conklin <jtc@rtl.cygnus.com>
45 * configure.in: Use sed instead of awk to get the values of
46 hostfile, targetfile and nativefile. Awk is not a utility
47 required by the GNU coding standards. This change also
48 fixes the rigid whitespace requirements that were required
50 * configure: regenerated.
52 Sat May 27 16:24:04 1995 Angela Marie Thomas <angela@cirdan.cygnus.com>
54 * sparclite/{Makefile,configure}.in: Add hooks for building with
55 -lsocket & -lnsl for solaris2. Don't build aload/eload for DOS.
57 Thu May 25 12:46:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
59 * gdbserver/remote-utils.c (prepare_resume_reply): Add FIXME
60 comment regarding signal numbering.
62 Wed May 24 15:49:47 1995 Steve Chamberlain <sac@slash.cygnus.com>
64 * arm-tdep.c (_initialize_arm_tdep): Use print_insn_little_arm
67 * arm-tdep.c (convert_from_extended, convert_to_extended):
69 * coffread.c (enter_linenos): Return if linetab 0.
70 * config/arm/arm.mt (TDEPFILES): Add simulator support.
71 * config/arm/tm-arm.h (FRAME_FIND_SAVED_REGS): Fix prototypes.
73 Mon May 22 19:37:21 1995 Rob Savoye <rob@darkstar.cygnus.com>
75 * config/idt.mt: replace monitor and array-rom with the new
78 Mon May 22 15:38:25 1995 Stu Grossman (grossman@cygnus.com)
80 * remote-nindy.c: Install Kung patch for PR 6820. I have no idea
83 * breakpoint.c: Move defaults of watchpoint related macros into
85 * target.h: Macros from breakpoint.c. Conditionalize based on
86 TARGET_HAS_HARDWARE_WATCHPOINTS.
87 * i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS
88 instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
90 * config/i386/nm-linux.h, config/mips/nm-irix4.h,
91 config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define
92 TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
94 Mon May 22 06:47:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
96 * breakpoint.c, target.h: Move defaults of watchpoint related
97 macros back to breakpoint.c. Required to get GDB compiling
100 Fri May 19 14:49:37 1995 J.T. Conklin <jtc@rtl.cygnus.com>
102 * defs.h (ATTR_FORMAT): New macro, expands to gcc's format
103 attribute when compiled by gcc.
104 * defs.h, language.h, monitor.h: Changed many function
105 declarations to use ATTR_FORMAT.
107 * breakpoint.c (delete_command); source.c (directory_command);
108 top.c (define_command): Changed call to query() that had too
110 * printcmd.c (address_info): Changed call to printf_filtered()
111 that had too many arguments.
113 Fri May 19 09:52:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
115 * infrun.c (wait_for_inferior): Move assignments to stop_signal
116 and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they
117 were--after the switch statement on w.kind. You can't read the
118 registers of an inferior which has exited. Use a goto in the
119 STOPPED_BY_WATCHPOINT code.
120 * infrun.c (wait_for_inferior): Reinstate
121 HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code.
123 Fri May 19 06:15:40 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
125 * utils.c, complaints.c, language.c, monitor.c, remote-array.c,
126 remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of
127 stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it
128 must match the definition of PARAMS.
133 Thu May 18 15:58:46 1995 J.T. Conklin <jtc@rtl.cygnus.com>
135 * utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered,
136 printf_filtered, printf_unfiltered, printfi_filtered, query, warning,
137 error, fatal, fatal_dump_core): Use stdarg.h macros when compiling
138 with an ANSI compiler.
139 * complaints.c (complain): Likewise.
140 * language.c (type_error, range_error): Likewise.
141 * monitor.c (monitor_printf, monitor_printf_noecho): Likewise.
142 * remote-array.c (printf_monitor, debuglogs): Likewise.
143 * remote-mips.c (mips_error): Likewise.
144 * remote-os9k.c (printf_monitor): Likewise.
145 * remote-st.c (printf_stdebug): Likewise.
147 * gdbtk.c (gdbtk_query): Likewise.
150 * defs.h, complaints.h, language.h, monitor.h: Add prototypes to
153 * printcmd.c: Remove uneeded #include <varargs.h>.
154 * remote-e7000.c: Likewise.
156 * f-typeprint.c (f_type_print_base): Fix typo found by above
159 Wed May 17 11:21:32 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
161 * Makefile.in (xcoffread.o): Depend on partial-stab.h.
163 * xcoffsolib.c (sharedlibrary_command): New command.
164 * xcoffsolib.c (solib_info): Call xcoff_relocate_symtab.
165 * xcoffsolib.c: Miscellaneous cleanups.
167 * partial-stab.h: Ignore symbol descriptor '-' (for local
168 variables with negative type numbers) without complaint.
170 * rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own
171 local emulation thereof. Remove unused variable ostart.
173 Wed May 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
175 * Makefile.in (config.status): changed target so that
176 config.status --recheck is executed if configure script changes.
178 * monitor.c (monitor_printf): Changed format specification in
179 error message to work with pre-ansi compilers.
180 (monitor_load_srec): reduced length of s-records from 128 to 32
181 bytes so download is more reliable with the rom68k monitor.
183 * rom68k-rom.c: Added trailing space to prompt string.
185 * config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
186 * config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
188 * defs.h, config/{xm-lynx.h, xm-nbsd.h},
189 config/i386/{xm-i386bsd.h, xm-linux.h},
190 config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
191 config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
192 (PSIGNAL_IN_SIGNAL_H): Removed.
194 Tue May 16 13:16:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
196 * Makefile.in (Makefile): Added config.status to dependency list.
198 * configure.in: Added INIT-CMDS argument to AC_OUTPUT which sets
199 gdb_host_cpu, gdb_target_cpu and nativefile.
200 * configure: regenerated.
202 Mon May 15 23:50:51 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
204 * mdebugread.c (parse_symbol): Do not relocate stBlock/scText
205 symbols, their value is the displacement from the procedure address.
206 * top.c (init_main): Add missing newlines to help strings for
207 `if' and `while' commands, fix help string for `show commands'.
209 Mon May 15 18:37:56 1995 Stu Grossman (grossman@cygnus.com)
211 * breakpoint.c: Move defaults of watchpoint related macros into
212 target.h. Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of
214 * infrun.c (wait_for_inferior): Enhance comment near
215 STOPPED_BY_WATCHPOINT.
216 * target.h: Macros from breakpoint.c.
218 Mon May 15 17:11:38 1995 J.T. Conklin <jtc@rtl.cygnus.com>
220 * config/i386/{i386sol2.mh, i386v4.mh, ncr3000.mh},
221 config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
222 mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
224 * config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
226 * Makefile.in, configure.in: Converted to use autoconf
227 * aclocal.m4: New file, local autoconf macro definitions.
228 * configure: New file, generated with autoconf 2.3.
230 Mon May 15 14:46:41 1995 Stan Shebs <shebs@andros.cygnus.com>
232 * remote.c (remote_kill): Add prototype.
233 * cpu32bug-rom.c (cpu32bug_open): Properly define as static.
234 * config/h8300/h8300hms.mt (TDEPFILES): Add monitor.o.
236 Mon May 15 12:12:34 1995 Stu Grossman (grossman@cygnus.com)
238 * sparclite/salib.c (win_ovf win_unf): Make window size constant
239 into a variable (__WINSIZE) so that it can be controlled via the
241 * sparclite/sparclite.h: Add SL933 #ifdef to set __WINSIZE to 6
244 * infrun.c: Add #ifdef HP_OS_BUG to all references to
245 trap_expected_after_continue.
246 * (wait_for_inferior): Fix for remote watchpoints. Don't try to
247 insert breakpoints while target is running (this only works on
248 *some* native targets). This may also speed up native watchpoints
251 Sat May 13 13:55:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
253 * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
254 mdebugread.c (struct symloc), hpread.c (struct symloc),
255 xcoffread.c (struct symloc): Fix inaccurate comment introduced
258 Sat May 13 13:34:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
260 * rs6000-tdep.c (find_toc_address): Revise comment.
261 * symfile.c, symfile.h (init_psymbol_list): New function;
262 consolidate duplicated copies from os9kread.c, dbxread.c
264 * defs.h: Declare info_verbose.
265 * xcoffread.c: Extensive changes to support psymtabs.
267 Fri May 12 13:48:41 1995 Stu Grossman (grossman@andros.cygnus.com)
269 * cpu32bug-rom.c remote-est.c rom68k-rom.c: Update line_term element.
271 Fri May 12 06:39:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
273 * partial-stab.h: Expand comments.
275 Thu May 11 19:01:37 1995 Jeff Law (law@snake.cs.utah.edu)
277 * Support debugging using native MACH primitives on hppa*-*-osf*.
278 * configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore.
279 * config/pa/hppaosf.mh: New file.
280 * config/pa/nm-hppao.h: Likewise.
281 * hppam3-nat.c: Likewise.
282 * config/pa/tm-hppao.h (PSW_SS): Define for single-stepping.
283 (MACHINE_CPROC_*_OFFSET): Define.
285 (START_INFERIOR_TRAPS_EXPECTED): Delete definition.
287 Wed May 10 18:59:26 1995 Stu Grossman (grossman@andros.cygnus.com)
289 * hppa-tdep.c (read_unwind_info): Cosmetic cleanup.
290 * (unwind_command): Clean it up and make it print things out
292 * monitor.c: Add ^C handling capability (mostly ripped off from
294 * (monitor_printf): Make it check the command echo.
295 * (monitor_printf_noecho): Similar to above, but doesn't check
297 * (monitor_stop): No longer waits for prompt. That is the job of
298 the caller. This makes things work much better for monitor_wait,
299 which waits for the prompt itself.
300 * (monitor_open): Deal with new monitor_stop semantics. Also,
301 flush input after sending init strings to get rid of junk that may
302 be output. Also, don't always send \r to remote. Use
303 monitor_ops->line_term cuz proper character isn't always \r.
304 * (monitor_fetch_register): Switch to completely different
305 algorithm to deal with lame-ass monitors which put spaces in the
306 middle of numbers, and prompt with a space!!!!!
307 * (monitor_read_memory_single): New routine to be used with
308 monitors that can only return one byte/short/long at a time. This
309 is selected via MO_GETMEM_READ_SINGLE.
310 * (monitor_load_srec): Use monitor_printf_noecho for sending S
311 records. Most targets don't echo them.
312 * (monitor.h): Get rid of cmd_delim. Add line_delim.
313 * op50n-rom.c (op50n_cmds): Fill it up. Make it work.
314 * w89k-rom.c: Change all eols from \r to \n. Change load_resp to
315 ^Q to prevent error message.
316 * config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special
317 instruction sequence at end to make restore_pc_queue happy.
319 Wed May 10 15:59:00 1995 Torbjorn Granlund <tege@adder.cygnus.com>
321 * remote-est.c (est_open): Make static to match prototype.
323 Tue May 9 16:58:50 1995 Michael Meissner <meissner@tiktok.cygnus.com>
325 * configure.in: Add little endian PowerPC support.
326 * config/powerpc/ppcle-eabi.mt: New file for little endian PowerPC
328 * config/powerpc/tm-ppcle-eabi.h: ditto.
330 Mon May 8 12:11:38 1995 J.T. Conklin <jtc@rtl.cygnus.com>
332 * nlm/configure.in (gdb_host, gdb_host_cpu, gdb_target): Removed.
333 These variables not used.
335 * config/m68k/monitor.mt (TDEPFILES): Added cpu32bug-rom.o.
337 Wed May 3 17:54:47 1995 Stan Shebs <shebs@andros.cygnus.com>
339 * monitor.c (monitor_command): Don't use PROMPT until monitor
340 target is known to be open.
341 (monitor_make_srec): Don't define size of hextab.
343 Tue May 2 18:32:24 1995 Stan Shebs <shebs@andros.cygnus.com>
345 * configure.in (--enable-netrom): New configuration option.
346 * Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append
348 (NETROM_OBS): New variable.
349 * remote-nrom.c: New file, NetROM target support.
350 * config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use
351 REMOTE_OBS instead of REMOTE_O.
353 * config/arc/arc.mt: Ditto.
356 Fri Apr 28 23:30:00 1995 Stu Grossman (grossman@cygnus.com)
358 * array-rom.c (_initialize_array array_open): Move baud_rate
359 initialization from _initxxx to array_open to fix bug with
360 overriding -b command line option.
362 Thu Apr 27 20:29:34 1995 Doug Evans <dje@canuck.cygnus.com>
364 * Makefile.in (RUNTEST): Fix reference of `srcdir'.
366 Wed Apr 26 19:01:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
368 * remote-hms.c: Rewrite to use new monitor conventions.
370 Tue Apr 25 11:27:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
372 * dbxread.c: Add comment explaining lowest_text_address.
373 Add comment regarding stringtab_global and psymtabs.
375 Sat Apr 22 01:26:29 1995 Jeff Law (law@snake.cs.utah.edu)
377 * config/pa/tm-hppa.h (EXTRACT_STRUCT_VALUE_ADDRESS): Fix.
379 * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Rewrite to correctly
380 handle "short", "int" and small structures returned in registers.
382 Fri Apr 21 12:57:53 1995 Kung Hsu <kung@mexican.cygnus.com>
384 * minsyms.c: add new function lookup_minimal_symbol_text, to look
385 for text symbol only.
386 * breakpoint.c (create_longjmp_breakpoint): call
387 lookup_minimal_symbol_text instead of lookup_minimal_symbol.
388 * symtab.h: add lookup_minimal_symbol_text prototype.
390 Fri Apr 21 12:03:44 1995 Stan Shebs <shebs@andros.cygnus.com>
392 * sh-tdep.c (sh-opc.h): Don't include.
393 (gdbcore.h): Include.
394 (frame_find_saved_regs): Remove unused local.
396 Thu Apr 20 10:12:21 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
398 * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
399 mdebugread.c (struct symloc), hpread.c (struct symloc): Clean
402 Wed Apr 19 16:58:11 1995 Stu Grossman (grossman@andros.cygnus.com)
404 * hppa-tdep.c (deposit_17): New routine to deposit 17 bit
405 constants into PA instructions.
406 * Put #ifdefs around all signal handling code. Not generally
407 needed for embedded boards.
408 * (hppa_fix_call_dummy): Parameterize offsets into call dummy to
409 allow different dummys to be used by this code. Use
410 INSTRUCTION_SIZE instead of REGISTER_SIZE for things.
411 Conditionalize setup of _sr4export fixup. Improve comments.
412 * config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different
413 call dummy if PA_LEVEL_0 is defined. Better comments for call
414 dummys. Define offsets for LDIL/LDO instructions which load
416 * config/pa/tm-pro.h: Get rid of signal handling stuff. Define
417 PA_LEVEL_0 to disable mucking with space regs and such.
419 Mon Apr 17 15:37:08 1995 Stu Grossman (grossman@andros.cygnus.com)
421 * cpu32bug-rom.c monitor.h op50-rom.c remote-est.c rom68k-rom.c
422 w89k-rom.c: Remove loadtypes, loadprotos and baudrates.
423 * op50-rom.c: Fix copyrights and add load routine to op50n_cmds.
424 * rom68k-rom.c (_initialize_rom68k): Don't set baud rate.
425 * w89k-rom.c: Fix copyrights.
427 Sun Apr 16 14:00:55 1995 Stu Grossman (grossman@andros.cygnus.com)
429 * monitor.c: Move all xmodem stuff into xmodem.[ch]. Remove
430 unnecessary remoteloadprotocol and remoteloadtype support.
431 * (expect expect_prompt): Change names to monitor_expect and
432 monitor_expect_prompt. Make them global.
433 * (printf_monitor): Change name to monitor_printf. Make global.
434 * (monitor_read_memory): Flush command echo to avoid parsing
435 ambiguity with CPU32Bug monitor.
436 * (monitor_load): Remove remoteloadprotocol and remoteloadtype
437 support. Call target_ops->load_routine, default to
439 * (monitor_load_srec): Remove everything but S-record support.
440 * monitor.h (monitor_ops): Add load_routine to provide monitor
441 specific download capability.
442 * remote-est.c: Clean up copyrights and comments.
443 * w89k-rom.c: Use new xmodem support.
444 * xmodem.c xmodem.h: New files to support xmodem downloads.
445 * rom68k-rom.c remote-est.c: Fix copyrights, add load_routine
446 entry to monitor_ops.
447 * cpu32bug-rom.c: New file to support Moto BCC debuggers.
448 * config/m68k/est.mt (TDEPFILES): Add cpu32bug.o.
449 * config/pa/hppapro.mt (TDEPFILES): Add xmodem.o.
451 Sat Apr 15 18:00:15 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
453 * rem-multi.shar: Removed; superceded by gdbserver.
455 Fri Apr 14 12:10:24 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
457 * xcoffread.c (xcoff_sym_fns): Revise comment about merging this
460 * breakpoint.c (fixup_breakpoints): Removed.
461 * rs6000-nat.c (vmap_symtab): Don't call fixup_breakpoints.
462 (vmap_ldinfo, xcoff_relocate_core): Call breakpoint_re_set.
464 * coffread.c (coff_symfile_offsets): Allocate SECT_OFF_MAX
465 sections, not just SECT_OFF_MAX-1.
467 * rs6000-nat.c (vmap_symtab), xcoffread.c: Re-do section offsets
468 to be indexed by SECT_OFF_* instead of xcoff section numbers.
469 * objfiles.c, remote.c: Remove comments regarding SECT_OFF_*.
470 * symtab.h: Revise comment about block_line_section.
471 * rs6000-nat.c (vmap_symtab): Don't relocate objfile->sections.
473 Sat Apr 15 14:15:14 1995 Stan Shebs <shebs@andros.cygnus.com>
475 * mpw-make.in (init.c): Don't try to do symbolic {o} in sed
476 command, not allowed by some version of MPW Make.
477 * ser-mac.c (mac-setbaudrate): Make it actually set baud rates.
479 Sat Apr 15 14:05:09 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
481 * alpha-tdep.c (alpha_push_arguments): Fix typo (TYPE_VALUE ->
482 VALUE_TYPE). Do the cast for TYPE_CODE_BOOL, TYPE_CODE_CHAR,
483 TYPE_CODE_ENUM, and TYPE_CODE_RANGE as well as TYPE_CODE_INT.
485 Sat Apr 15 14:04:32 1995 Per Bothner <bothner@cygnus.com>
487 * alpha-tdep.c (alpha_push_arguments): Only cast to long for
491 Sat Apr 15 13:52:24 1995 Stan Shebs <shebs@andros.cygnus.com>
493 * gdbtk.c (gdb_disassemble): Read from inferior if connected
496 Fri Apr 14 10:18:20 1995 Stu Grossman (grossman@cygnus.com)
498 * README.GDBTK: New file. Contains the obvious.
501 Thu Apr 13 16:17:04 1995 Rob Savoye <rob@darkstar.cygnus.com>
503 * remote-array.c: New file for Array Tech LSI33k based controller
506 Thu Apr 13 12:23:31 1995 Kung Hsu <kung@rtl.cygnus.com>
508 * a29k-tdep.c (get_longjmp_target): Replace SWAP_TARGET_AND_HOST with
510 * remote-vxsparc.c: New file, preliminary check in, this configuration
512 * remote-vxmips.c: ditto.
514 Thu Apr 13 12:10:14 1995 Michael Meissner <meissner@tiktok.cygnus.com>
516 * rs6000-tdep.c (xcoff_add_toc_to_loadinfo): Don't use a prototype
517 to declare the function.
519 Wed Apr 12 16:40:20 1995 Stan Shebs <shebs@andros.cygnus.com>
521 * monitor.h (init_monitor_ops): Declare.
522 * rom68k-rom.c: Clarify some comments.
523 (rom68k_open): Define as static, to match decl.
525 Wed Apr 12 16:36:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
528 * .gdbinit: Move list-objfiles to gdb.gdb.
530 * values.c (set_internalvar): Set modifiable flag of newval.
532 Wed Apr 12 14:34:31 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
534 * xcoffread.c: Call complain() rather than error() or printing a
538 Wed Apr 12 08:15:27 1995 Doug Evans <dje@canuck.cygnus.com>
540 * arc-tdep.c: #include "gdbcmd.h".
541 (codestream_seek): Pass CORE_ADDR.
542 (arc_cpu_type, tmp_arc_cpu_type, arc_cpu_type_table): New globals.
543 (debug_pipeline_p): Likewise.
544 (X_...): Instruction field access macros.
545 (BUILD_INSN): Define.
546 (codestream_tell): Allow for stream elements > 1 byte.
547 (codestream_fill): Likewise.
548 (setup_prologue_scan): New function.
549 (arc_get_frame_setup): Call it. Update to current spec
550 regarding prologues. Use BUILD_INSN.
551 (skip_prologue): New argument `frameless_p'. Use BUILD_INSN.
552 (arc_frame_saved_pc): New function.
553 (frame_find_saved_regs): Use BUILD_INSN.
554 (get_insn_type, single_step): New functions.
555 (one_stepped): New global.
556 (arc_set_cpu_type_command, arc_show_cpu_type_command): New functions.
557 (arc_set_cpu_type): New function.
558 (_initialize_arc_tdep): Define new `set' commands `cpu',
559 `displaypipeline', and `debugpipeline'.
560 * remote-arc.c (break_insn): Add bi-endian support.
561 (arc_insert_breakpoint): Likewise.
562 (arc_remove_breakpoint): Likewise.
563 (switch_command): Delete.
564 * arc/tm-arc.h (TARGET_BYTE_ORDER): Delete.
565 (TARGET_BYTE_ORDER_SELECTABLE): Define.
566 (DEFAULT_ARC_CPU_TYPE): Define.
567 (SKIP_PROLOGUE_FRAMELESS_P): Define.
568 (BREAKPOINT): Delete.
569 (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Define.
570 (DECR_PC_AFTER_BREAK): Change to 8.
571 (NO_SINGLE_STEP): Define.
572 (ARC_PC_TO_REAL_ADDRESS): Define.
573 (SAVED_PC_AFTER_CALL): Use it.
574 (NUM_REGS, REGISTER_BYTES): Fix.
575 (FRAME_SAVED_PC): Call arc_frame_saved_pc.
576 (FRAME_LOCALS_ADDRESS): Fix.
579 Tue Apr 11 16:42:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
581 * top.c, utils.c, defs.h: Remove error_hook. It is currently
582 unused and would need to hook into error_begin()/return_to_top_level(),
583 instead of error(), if it were to be used.
585 Tue Apr 11 13:46:25 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
587 * utils.c, defs.h (warning_begin): Renamed from warning_setup, for
588 consistency with error_begin. Also print warning_pre_print.
590 * utils.c (warning): Use it.
591 * utils.c (error_begin): Doc fix.
592 * rs6000-nat.c (vmap_ldinfo): If we don't find ldinfo for the
593 symfile_objfile, nuke it.
595 Tue Apr 11 09:35:20 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
597 * printcmd.c (print_address_numeric): Pass use_local to
598 print_longest, rather than always passing 1.
600 * nlm/Makefile.in: Remove comments discussing munch.
603 Tue Apr 11 11:07:12 1995 Michael Meissner <meissner@tiktok.cygnus.com>
605 * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, but
606 F_SETOWN is, use that.
609 Mon Apr 10 18:31:57 1995 Stan Shebs <shebs@andros.cygnus.com>
611 Merge in support for Mac MPW as a host.
612 (Old change descriptions retained for informational value.)
614 * mpw-config.in (i386-unknown-go32): Change from aout.
615 (sh-hitachi-hms): New target.
616 * mpw-make.in (BISON): Use byacc instead of bison.
617 (VERSION): Bump to 4.14.1.
618 (*-pinsn.*): Remove mentions everywhere.
619 (all): Don't build MacGDB.
620 (gdb, SiowGDB): Depend on Version.r.
621 (Version.r): Generate from version info.
622 * main.c (main): Pass program name to START_PROGRESS, END_PROGRESS.
623 (main) [MPW]: Remove debugging hook.
624 * mac-xdep.c (debug_openp): New flag.
625 (mac_init): Set flag if env variable defined.
626 * ser-mac.c (mac_open): Clarify error message.
627 (mac_readchar): Call PROGRESS while looping.
628 (mac_write): Call sleep instead of sec_sleep.
630 * source.c (openp) [MPW]: Only print debugging info if debugging.
631 * utils.c (query) [MPW]: Clarify that behavior is a bug.
633 * mpw-make.in (init.c): Use open-brace instead of mpw-open-brace.
635 * main.c, source.c: Remove hacks that replace long strings
636 with shorter ones, now solved portably.
638 * config/m68k/xm-mpw.h (spin.h): Include.
639 (ALMOST_STDC): Only define if MPW_C.
640 * config/m68k/tm-mac.h: New file, Mac target definitions.
642 * mpw-config.in (m68k-apple-macos, ppc-apple-macos,
643 i386-unknown-aout): New targets.
644 (mk.tmp): Add *DEPFILES definitions.
645 * mpw-make.in: Remove gC rules, clean up definitions for other
646 include files, bump version, fix bogus \ that should be \Option-d.
647 (init.c): Build correctly.
649 * mpw-make.in (HFILES_NO_SRCDIR): Add somsolib.h
650 (ALLDEPFILES): Add somsolib.c.
651 (somsolib.o): Add some dependencies.
653 * mpw-config.in: Use nm-empty.h if host is not target.
654 (xdepfiles): Add mac-xdep.c.o.
656 * mpw-make.in: Add Fortran files.
659 * mpw-config.in (MacSerial.h): Duplicate from standard Serial.h.
660 * ser-mac.c (MacSerial.h): Include instead of Serial.h.
662 * mpw-make.in: Use {s} instead of {srcdir} everywhere.
663 (bindir, libdir): Remove extra colon.
664 (source.c): Compile with C instead of gC.
665 (c-exp.tab.c, ch-exp.tab.c, m2-exp.tab.c): Add {o}.
666 (install-only): Don't install MacGDB.
667 * source.c (openp) [MPW]: Add a debugging display.
668 (open_source_file) [MPW]: Use MPW basename finders.
669 [MPW_C]: Briefer versions of help for line and list commands.
671 * mpw-make.in: Change references from paread.c to somread.c
673 * mpw-make.in (VERSION): Update to 4.12.3.
674 (SiowGDB): New target, GDB using SIOW library.
675 (init-new.c): New target, attempt to generate init.c from sources.
676 (main.c.o, top.c.o): Put each in its own segment.
677 * main.c (main) [MPW]: Always call mac_init.
678 * utils.c (query) [MPW]: Always return "yes" if in MacGDB, output
679 an extra newline otherwise.
680 * mac-xdep.c: More comments in various places, remove junk.
681 (mac_init): Add tests for MPW and SIOW.
682 (use_wne, has_color_qd): Renamed.
683 (use_color_qd): New variable.
684 (grow_window): Only do console resizing to console window,
685 call resize_console_window.
686 (zoom_window): Call resize_console_window.
687 (resize_console_window, scroll_text): New functions.
688 (adjust_console_sizes): Always align viewrect to even multiples of
690 (adjust_console_text): Always scroll by whole lines.
691 (hacked_vfprintf, hacked_puts, hacked_fputc, hacked_putc): Force a
692 recalculation of scroll positions if a newline was output.
693 (hacked_fflush): Similarly, for flushing.
694 (hacked_fgetc): New function, aborts if called in MacGDB.
695 * ser-mac.c (mac_readchar): Rename starttime to start_time,
696 remove debugging printf.
697 (mac_write): Sleep on first 4 writes.
698 (sec_sleep): New function, works like standard sleep.
699 * macgdb.r: Adjust positioning and contents of About box.
700 Set minimum size to 2000K, preferred size to 5000K.
701 * config/m68k/xm-mpw.h (fgetc): Define as a macro.
703 * mpw-make.in (.c.o, .gc.o): Prefix segment names with gdb_.
704 (top.c.o, annotate.c.o): Add build rules.
705 * macgdb.r (SysTypes.r): Include.
706 ('vers'): New resource, version info.
707 (mFile, mEdit, mDebug): Enable all menu items.
708 (mDebug): Add key equivalents for continue, step, next.
709 (wConsole): Add zoom and close boxes to window.
710 * mac-xdep.c (new_console_window): New function, code taken from
712 (mac_command_loop): Use GetCaretTime for wait interval, call
713 do_idle on null events.
714 (do_idle): New function.
715 (zoom_window): Implement zooming.
716 (v_scroll_proc): New function, handles vertical scrolling.
717 (activate_window): Do activation of console window.
718 (do_menu_command): Implement items of file, edit, and debug menus.
719 (do_keyboard_command): Fix command extraction.
720 (adjust_console_sizes, adjust_console_text): New functions.
721 (hacked_fprintf, hacked_vfprintf, hacked_fputs, hacked_fputc,
722 hacked_putc): Don't call draw_console.
723 * ser-mac.c (mac_open): Add an error message for invalid ports.
724 (first_mac_write): New global.
725 (mac_write): Use first_mac_write to sleep on first several writes.
727 * mpw-make.in (INCLUDE_CFLAGS): Add readline source dir.
728 (READLINE_CFLAGS, READLINE_SRC, READLINE_DIR): Uncomment.
729 (TSOBS): Don't compile inflow.c.
730 (all, install): Add MacGDB.
731 * main.c (main): Do Mac-specific init and command loop if a
732 standalone app, skip full option help message if compiling
734 (gdb_readline): If MPW, add a newline after the (gdb) prompt.
735 * utils.c (_initialize_utils): If MPW, don't try to use termcap to
736 compute the window size.
737 * config/m68k/xm-mpw.h (printf, fprintf, fputs, fputc, putc,
738 fflush): Define as macros that expand into hacked_... versions.
739 (StandAlone, mac_app): Declare.
740 * macgdb.r (SIZE): Set the default partition to 4000K.
741 * mac-xdep.c (readline.h, history.h): Include.
742 (terminal.h): Don't include.
744 (gdb_has_a_terminal): Define Mac-specific version.
745 (do_keyboard_command): Simplify search for command string.
746 (readline): Define as gdb_readline.
747 Add other history/readline stubs to make main gdb link.
748 (hacked_fprintf, hacked_printf, hacked_vfprintf, hacked_fputs,
749 hacked_fputc, hacked_fflush): New functions, intercept output to
750 stdout and stderr, send to console window.
752 * mpw-make.in (MacGDB): New target, standalone Mac-hosted gdb.
754 (main.c.o): Compile with gC instead of C.
755 * mac-defs.h: New file, menu etc definitions shared between
757 * macgdb.r: New file, Rez (resource compiler) resource
759 * mac-xdep.c: New file, Mac host interface code.
760 * config/m68k/xm-mpw.h (PATHNAME_SEPARATOR): Rename to
762 (PATHNAME_SEPARATOR_STRING): Remove.
763 (SIGQUIT, SIGHUP): Define.
764 (fileno, R_OK): Define.
766 * mpw-config.in: New file, MPW configuration fragment.
767 * mpw-make.in: New file, MPW makefile fragment.
768 * config/m68k/xm-mpw.h: New file, MPW host definitions.
769 * ser-mac.c: New file, Mac serial interface.
771 Mon Apr 10 16:47:57 1995 Kung Hsu <kung@mexican.cygnus.com>
773 * valprint.c (print_longest): Fix a syntax error in #ifdef
774 PRINTF_HAS_LONG_LONG.
776 * config/mips/xm-irix5.h: turn on CC_HAS_LONG_LONG and
777 PRINTF_HAS_LONG_LONG.
778 * config/mips/tm-irix5.h: turn on FORCE_LONG_LONG.
780 Sat Apr 8 02:47:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
782 * mdebugread.c (parse_symbol): Use new variable
783 nodebug_var_symbol_type as type of variables which don't have any
784 ecoff debug info associated with them.
785 (parse_symbol, parse_procedure): Use heuristics to determine if
786 functions were compiled without debugging info and change their
787 type to nodebug_function_symbol_type.
788 (_initialize_mdebugread): Initialize nodebug_*_symbol_type.
790 * source.c (line_info): Clear sal.pc for `info line' without
793 Fri Apr 7 17:43:01 1995 Stu Grossman (grossman@andros.cygnus.com)
795 * monitor.c: make_xmodem_packet and print_xmodem_packet go away.
796 send_xmodem_packet shows up to do the obvious. Lots of fixes to
797 xmodem downloads including resetting of block number at start of
798 new transfers, fix for buffer overrun problem, addition of CRC
800 * (monitor_open): loadtype_str and loadproto_str now default to
801 first entry in monitor_ops->loadtypes.
802 * (monitor_wait): Lengthen register dump buf, because of verbose
804 * (monitor_fetch_register): Report unimplemented registers as 0.
805 * (monitor_read_memory): Only do 16 byte aligned transfers
806 because of formatting weirdness with the Winbond monitor. Also,
807 ignore non-hex, non-whitespace formatting between bytes (same
809 * (monitor_load): Clean up logic.
810 * (monitor_load_srec): Re-do xmodem support. Move lots of it
811 into send_xmodem_packet.
812 * (getacknak): Get rid of polls and timeouts. Handle CRC
813 requests from receiver.
814 * (monitor_make_srec): Efficiency improvements. Don't call
815 sprintf to output two digit hex numbers.
816 * (crcinit, docrc): New, CRC-16 support routines.
817 * (send_xmodem_packet): New routine to generate either CRC-16 or
818 checksummed xmodem packets.
820 * remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes):
821 Reduce tables down to only the load types supported by each
824 * w89k-rom.c (w89k_supply_register): Parses output of Winbond
826 * (w89k_loadtypes, w89k_loadprotos): Reduce to just srec/xmodem.
827 * (w89k_cmds): Add clear all breakpoints, memory fill, and dump
830 * config/pa/tm-hppa.h: Define lots register offsets needed by
834 Thu Apr 6 17:00:46 1995 Michael Meissner <meissner@tiktok.cygnus.com>
836 * Makefile.in (X11_INCLUDES): Define as empty.
837 (X11_CFLAGS): Define as including $(X11_INCLUDES).
838 (X11_LIB_SWITCHES): Define as empty.
839 (X11_LIBS): Define as -lX11.
842 * configure.in (enable_gdbtk): If gdbtk, support the --x-includes
843 and --x-libraries switches, setting the X11_INCLUDES and
844 X11_LIB_SWITCHES respectively. Instead of using a hardcoded -lX11
845 in ENABLE_CLIBS, use the X11_LIB_SWITCHES and X11_LIBS variables.
847 * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, don't use
848 it. This means that the stop button doesn't work, but is better
852 Wed Apr 5 19:57:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
854 * mips-tdep.c (mips_print_register): Remove unused variable
855 our_type and call to init_type. Fixes memory leak. Reindent function.
857 * mips-tdep.c (mips_print_register), findvar.c
858 (write_register_bytes): Make buffer char[] instead of unsigned
861 Mon Apr 3 19:28:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
863 * top.c, utils.c, main.c, defs.h: Replace error_pre_print with two
864 variables: error_pre_print (for RETURN_ERROR) and quit_pre_print
865 (for RETURN_QUIT). Fixes a bug whereby typing ^C (e.g. in "maint
866 print sym") could output extraneous stuff.
867 * objfiles.c: Don't declare error_pre_print; defs.h does it.
869 Mon Apr 3 13:48:28 1995 Stu Grossman (grossman@andros.cygnus.com)
871 * monitor.h: Add MO_GETMEM_NEEDS_RANGE flag.
872 * monitor.c (monitor_read_memory): Use previously mentioned flag
873 to send proper format memory examine commands to the w89k monitor.
874 Also, try to handle bizarre format of memory dump...
876 * op50-rom.c w89k-rom.c: Update to new monitor.[ch] conventions.
878 Sat Apr 1 03:22:20 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
880 * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
881 Handle relocated symbol address.
882 * partial-stab.h, case N_SO, SOFUN_ADDRESS_MAYBE_MISSING:
883 Do not relocate a zero address.
885 Thu Mar 30 19:46:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
887 * config/a29k/tm-a29k.h: Nuke obsolete define CONTROL_END_ADDR; it
890 * stabsread.c (read_range_type): Remove FIXME comment about
891 type-id (I presume this meant a number followed by = followed by a
892 type) versus type number; Per fixed it.
894 Wed Mar 29 09:56:04 1995 Jason Molenda (crash@phydeaux.cygnus.com)
896 * configure.in: sparc-*-sunos5* is same as sparc-*-solaris2*.
898 Wed Mar 29 18:30:03 1995 Stan Shebs <shebs@andros.cygnus.com>
900 * remote-e7000.c (why_stop): Add new kinds of strings to expect
902 (e7000_wait): Add interpretations for more stop reasons,
903 including warnings for write protect and cycle address errors.
905 Wed Mar 29 17:09:29 1995 Stu Grossman (grossman@cygnus.com)
908 * Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate
909 locations (per-host) for X11 include files.
910 * config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force
911 the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs
912 of the R5 include files.
914 * monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of
915 support for interrupting target.
916 * monitor.c (monitor_open): Send stop command before doing
918 * (monitor_load_srec): Fix record size calculation to prevent end
919 of segment from getting trashed.
920 * rom68k-rom.c: Update to latest version of struct monitor_ops.
921 * config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order
922 problems. Makes DOS hosted function calling work.
923 * sparclite/crt0.s: Define _start to make COFF happy.
925 Wed Mar 29 09:11:51 1995 Michael Meissner <meissner@tiktok.cygnus.com>
927 * defs.h (atof): Don't provide an external declaration if atof is
930 Wed Mar 29 00:01:07 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
932 * rs6000-tdep.c (skip_prologue): Skip saving of LR and CR in
933 the stack frame, fix typos in `st rx,NUM(r1)' and `stu r1,NUM(r1)'
936 Tue Mar 28 17:04:04 1995 Per Bothner <bothner@kalessin.cygnus.com>
938 * gdbtypes.c (create_range_type): If indextype has TYPE_FLAG_STUB
939 set, set TYPE_FLAG_TARGET_STUB.
940 (check_stub_type): Recalculate TYPE_LENGTH for range type.
941 * stabsread.c (read_range_type): If index type number is followed
942 by '=', back up, call read_type. and assume we have a true range.
943 * gdbtypes.h (TYPE_FLAG_TARGET_STUB): Update comment.
945 Mon Mar 27 22:51:54 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
947 * alpha-nat.c, irix4-nat.c, irix5-nat.c, mipsv4-nat.c,
948 sparc-tdep.c (supply_gregset, supply_fpregset): Fill inaccessible
949 registers with zero to handle recent read_register_bytes change.
950 * irix4-nat.c, irix5-nat.c, mipsv4-nat.c (supply_gregset,
951 fill_gregset): Fix handling of CAUSE_REGNUM.
952 * mips-nat.c (store_inferior_registers): Handle unwritable
953 registers when storing a single register.
954 * config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM):
957 * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Clear
958 allocated mips_extra_func_info, if the debug info is corrupt,
959 the PDR to fill it in might be missing.
961 Mon Mar 27 14:43:00 1995 Kung Hsu <kung@mexican.cygnus.com>
963 * vx-share/regPacket.h: a new file interfacing with vxworks.
965 Sun Mar 26 13:22:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
967 * breakpoint.c (bpstat_do_actions): Once we've executed the
968 commands, set bs->commands to NULL.
970 Sat Mar 25 01:16:10 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
972 * buildsym.c (patch_subfile_name): Update last_source_file
973 with the real source file name.
974 * dbxread.c (end_psymtab): Handle static functions in the
975 SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename
976 to lookup_minimal_symbol.
977 (process_one_symbol): Ignore extra outermost context from
979 * stabsread.c (define_symbol): Do not complain for SunPRO
980 static variable encoding if STATIC_TRANSFORM_NAME is defined.
981 * sparc-tdep.c, config/sparc/tm-sun4sol2.h
982 (sunpro_static_transform_name): Renamed from
983 solaris_static_transform_name.
984 * config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
985 Define to sunpro_static_transform_name for acc 3.0 compiled
987 * procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS):
988 Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults
990 * procfs.c (info_proc_siginfo): Cast sip->si_addr to
991 `unsigned long' and use `lx' format for printing it.
993 Fri Mar 24 15:45:42 1995 Stu Grossman (grossman@cygnus.com)
995 * configure.in: Move test for m68*-est-* before m68*-*-coff*.
996 * findvar.c: Move default def of CANNOT_STORE_REGISTER closer to
997 the beginning of the code.
998 * (write_register_gen): New routine. Analogous to
1000 * (write_register_bytes): Another rewrite! Make it smarter about
1001 not updating regs with the same value.
1002 * monitor.c (printf_monitor readchar): Use stderr instead of
1003 stdout to output debug info. Also cleanup readchar a little.
1004 * (expect): Make sure that excessive responses are null
1006 * (monitor_open): Check for magic number in monitor_ops struct.
1007 Allow multiple commands as init strings. Also, clear all
1009 * (monitor_resume monitor_wait): Send a command to dump all the
1010 regs for those targets which don't do so when waking up after a
1012 * (monitor_wait): Handle excessive response output better.
1013 * (monitor_write_memory): Use block fill, word, and long word
1014 commands (if they exist) to write memory more efficiently.
1015 * General cleanups to use flag bits instead of individual flag
1016 words in monitor_ops struct.
1017 * (monitor_command): Return output from command.
1018 * (monitor_load_srec): Allocate buffer only once. Use alloca.
1019 Wait for load response string instead of using a timeout to start
1020 sending S-records. Fix bug where value of srec_frame shrinks. If
1021 hashmark is set, print `-' for retransmissions. General cleanups.
1022 * (monitor_make_srec): Get rid of S-record default type kludge.
1023 * monitor.h: Use seperate struct for memory and register
1024 read/write commands. Memory commands can come in byte, word,
1025 long, and longlong forms.
1026 * (monitor_ops): Change lots of fields. Generalize some stuff.
1027 Put all flags into flags word. Allow init to be a list of commands.
1028 Add command for clearing all breakpoints, block fill, dumping all
1030 * remote-est.c: Rewrite to use new monitor conventions.
1031 * config/m68k/est.mt (TDEPFILES): Add monitor.o.
1032 * config/m68k/tm-est.h: Set NUM_REGS to 18.
1033 * testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test
1036 Thu Mar 23 23:20:00 1995 Jeff Law (law@snake.cs.utah.edu)
1038 * somsolib.c (som_solib_add): Handle case where a shared library
1039 referenced by a core file has sections without the SEC_ALLOC bit
1040 set (eg stabs sections).
1042 Thu Mar 23 15:07:08 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1044 * breakpoint.c (bpstat_do_actions): For each element in the bpstat
1045 chain, do all the commands regardless of whether they run the
1048 Wed Mar 22 19:17:06 1995 Doug Evans <dje@cygnus.com>
1050 * mem-break.c (LITTLE_BREAKPOINT, BIG_BREAKPOINT): Define as
1051 BREAKPOINT if mono-endian.
1052 (break_insn): Deleted.
1053 (big_break_insn, little_break_insn): Define.
1054 (memory_insert_breakpoint): Handle bi-endian cpus.
1055 (BREAKPOINT_LEN): Define.
1056 (memory_remove_breakpoint): Use it.
1057 (memory_breakpoint_size): Likewise.
1059 Tue Mar 21 17:03:17 1995 Kung Hsu <kung@mexican.cygnus.com>
1061 * sparc-stub.c: add nop after 'bg good_wim'.
1062 * sparcl-stub.c: ditto.
1064 Tue Mar 21 13:34:12 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1066 * infrun.c (handle_command): Don't print TARGET_SIGNAL_0,
1067 TARGET_SIGNAL_UNKNOWN, or TARGET_SIGNAL_DEFAULT.
1069 Mon Mar 20 10:09:59 1995 Jeff Law (law@snake.cs.utah.edu)
1071 * hppab-nat.c (store_inferior_registers): Sync with HPUX version.
1073 Mon Mar 20 07:34:48 1995 Stu Grossman (grossman@cygnus.com)
1075 * hppah-nat.c (store_inferior_registers): Move check for
1076 CANNOT_STORE_REGISTER to a better place. Fixes ptrace I/O errors
1077 found by test suite during function calls, which attempts to write
1078 unwritable registers.
1080 Sat Mar 18 02:02:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1082 * mdebugread.c (parse_symbol): If finishing a function without
1083 known parameter type info, set that from parameter symbols.
1084 Remove commented-out add_param_to_type support.
1086 Thu Mar 16 16:38:03 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1088 * xcoffread.c (process_linenos): Make sure filename we pass to
1089 start_subfile will cause deduce_language_from_filename to return
1090 the correct thing. Reindent function to GNU standards.
1092 Thu Mar 16 15:54:00 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1094 * nlm/gdbserve.c (handle_exception): #if out call to StopBell,
1095 as it is not available on NetWare 3 or PIN.
1096 * nlm/ppc.c (StopBell): Removed.
1098 Thu Mar 16 12:14:41 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1100 * xcoffread.c (read_xcoff_symtab): When creating a dummy parameter
1101 inferred from the traceback tags, give its type the name
1102 "<non-float parameter>".
1104 * stabsread.c (rs6000_builtin_type): Recognize types -31 to -34.
1106 Wed Mar 15 15:09:29 1995 Stu Grossman (grossman@cygnus.com)
1108 * findvar.c (read_register_bytes write_register_bytes): Make
1109 these routines much smarter about updating registers from the
1110 target, only doing so when absolutely necessary. This really
1111 speeds up register modification on some remote targets.
1113 * monitor.c: More cleanups. Get rid of monitor_load_ascii_srec.
1114 BFD makes this unnecessary. Lots of debugging speedups.
1115 * (expect): NULL terminate return string.
1116 * (monitor_open monitor_supply_register parse_register_dump
1117 monitor_wait monitor_fetch_register): Switch to using GNU regexp
1118 library to parse multi-register displays.
1119 * (monitor_read_memory): Read multiple bytes (up to 16) at once.
1120 * (monitor_create_inferior): Call clear_proceed_status to make run
1121 command notice first breakpoint.
1122 * (monitor_load): Clean up. Reset inferior_pid, set pc to start
1123 address and reset symbol table stuff to make loads put things into
1125 * (monitor_load_srec): Lower sleep time to 1 second.
1127 * monitor.h (struct monitor_ops): Add register_pattern and
1128 supply_register to monitor_ops.
1130 * rom68k-rom.c: Add new support for handling register dumps.
1131 * config/m68k/tm-m68k.h: Define D0_REGNUM and A0_REGNUM for register
1134 Wed Mar 15 15:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1136 * utils.c, defs.h (putchar_unfiltered, fputc_unfiltered): Make
1137 argument be an int, not a char. Using a prototype followed by an
1138 old-style function definition in a case where an argument is
1139 widened is a GCC-ism not supported by the native AIX compiler.
1141 Wed Mar 15 12:22:35 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1143 * nlmstub.def: Removed, this was moved to nlm/gdbserve.def
1146 * configure.in (alpha-*-netware*): Removed configuration.
1147 * config/alpha/{alpha-nw.mt, gdbserve.mt, tm-alphanw.h}: Removed.
1148 * nlm/{README-ALPHA-NETWARE, aio.h, alpha-io.S, alpha-regdef.h,
1149 alpha.c, alpha.h, altdebug.h}: Removed.
1151 * nlm/gdbserve.c (main): Add support for processing BOARD=
1152 argument, deprecate NODE=.
1154 Wed Mar 15 10:58:26 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1156 * c-exp.y (yylex): Make an empty character constant an error.
1158 Tue Mar 14 15:00:54 1995 Per Bothner <bothner@kalessin.cygnus.com>
1160 * valops.c (value_arg_coerce): Do possible value_coerce_array
1161 before determining type argument to value_cast.
1163 Tue Mar 14 10:41:41 1995 Kung Hsu <kung@mexican.cygnus.com>
1165 * remote-es.c: Replace ignore with 0.
1167 Tue Mar 14 05:52:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1169 * valops.c (value_repeat), eval.c (evaluate_subexp_standard):
1170 If VALUE_REPEATED is already set, just error out.
1172 * valops.c (value_cast, value_slice), parse.c (follow_types): Add
1173 FIXME-type-allocation comments.
1175 * gdbtypes.h (struct type): Fix comment about what units the
1178 Mon Mar 13 18:27:25 1995 Stan Shebs <shebs@andros.cygnus.com>
1180 * ch-valprint.c (annotate.h): Include.
1181 * eval.c (evaluate_subexp_standard): Remove unused variable.
1182 (calc_f77_array_dims): Add parens to expression.
1183 * f-exp.y (yylex): Add parens to expression, remove unused label.
1184 * f-lang.h (calc_f77_array_dims): Declare.
1185 * f-valprint.c (f_val_print): Remove unused variables.
1187 Mon Mar 13 15:25:47 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1189 * alpha-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
1190 use the PDR, just examine prologues instead.
1193 Fri Mar 10 16:13:18 1995 Kung Hsu <kung@mexican.cygnus.com>
1195 * config/tm-arc.h: Change arc register names.
1198 Fri Mar 10 02:49:40 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1200 Fix problems with infinite recursion when printing a class
1201 that contains a static instance of the class.
1202 * cp-valprint.c (dont_print_vb_obstack): Renamed from
1203 dont_print_obstack, made static.
1204 (dont_print_statmem_obstack): New obstack, controls printing
1205 of static member classes.
1206 (_initialize_cp_valprint): Initialize it.
1207 (cp_print_static_field): New function, handles printing of
1209 (cp_print_value_fields): New parameter dont_print_statmem to
1210 handle recursive printing of static member classes, use
1211 cp_print_static_field to handle printing of static members.
1212 * c-valprint.c (cp_print_value_fields): Update prototype and
1213 call to include additional dont_print_statmem parameter.
1214 * c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused
1217 * alpha-tdep.c, findvar.c, infptrace.c: Include <string.h>.
1219 * config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call
1220 alpha_find_saved_regs if fi->saved_regs is still NULL.
1222 * elfread.c (elf_symtab_read): Ensure that the filename field
1223 of a minsym is nonempty. Ignore solib trampoline symbols from
1224 the main symbol table, they might have a bogus value.
1226 * procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
1227 Fix typos in comments.
1229 Thu Mar 9 17:19:47 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1231 * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Initialize
1232 pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1. That way
1233 we know whether the PDR ever got set.
1234 * mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
1235 use the PDR, just examine prologues instead.
1237 Wed Mar 8 23:35:10 1995 Jeff Law (law@snake.cs.utah.edu)
1239 * somsolib.c (som_solib_section_offsets): Get offset of text
1242 Wed Mar 8 16:12:21 1995 Stu Grossman (grossman@cygnus.com)
1244 start-sanitize-gdbtk
1245 * gdbtk.c (gdb_get_breakpoint_info): Return error if breakpoint
1246 type is not bp_breakpoint.
1249 * source.c (forward_search_command reverse_search_command): Set
1250 convenience variable $_ to be the line # of the match.
1251 * symtab.c (decode_line_1): Allow convenience variables to be
1252 used in line specs (for breakpoints and such).
1254 Wed Mar 8 12:51:00 1995 Stan Shebs <shebs@andros.cygnus.com>
1256 * Makefile.in (VERSION): Bump to 4.14.1.
1257 * NEWS, README: Update for 4.14.
1258 * i386v-nat.c (i386_insert_aligned_watchpoint): Fix declaration.
1259 (i386_insert_nonaligned_watchpoint): Call aligned instead of
1260 generic watchpoint insertion.
1262 Tue Mar 7 19:26:10 1995 Per Bothner <bothner@kalessin.cygnus.com>
1264 * valops.c (value_slice): Do COERCE_VARYING_ARRAY.
1266 Tue Mar 7 00:23:47 1995 Stu Grossman (grossman@cygnus.com)
1268 * monitor.c, array-rom.c, monitor.h, rom68k-rom.c: Move target_ops
1270 * monitor.c (monitor_create_inferior): Allow run command to start
1273 * monitor.c (monitor_load): Set PC to start address when done
1276 * array-rom.c, monitor.h, rom68k-rom.c: Clean up target_ops.
1277 Remove ref to monitor_create_inferior.
1279 * monitor.c: More general cleanups. Add prototypes, remove
1280 unused routines. Fix bug with wrong number of args to error().
1282 * main.c (main): Don't start up GUI when running under gdb mode
1285 * Makefile.in: Add rules for monitor.o and rom68k-rom.o to make
1286 Sun make (with VPATH) work...
1288 * monitor.c, monitor.h, rom68k-rom.c: Serious cleanup to make IDP
1289 (rom68k) target work right.
1290 * array-rom.c, op50-rom.c, w89k-rom.c: Partial updates to new
1291 monitor.c interface. More work needs to be done here.
1292 * config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to
1293 match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no
1294 floating-point for this card.
1296 * serial.h, ser-go32.c, ser-go32-para.c, ser-mac.c, ser-tcp.c,
1297 ser-unix.c: Add SERIAL_SETSTOPBITS to set the number of stopbits
1298 (needed for IDP board?!?!?).
1300 * defs.h, utils.c, remote-hms.c, remote-pa.c, remote.c: Fix defs
1301 and usage of fputc_unfiltered and putchar_unfiltered. Eliminate
1302 putc_unfiltered (it's superfluous).
1304 * command.h, command.c, top.c: Add var_enum command type. It's
1305 like var_string but allows only only one of the specified strings.
1307 Mon Mar 6 15:03:59 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1309 * valops.c (value_cast): Don't use backslash newline--pre-ANSI
1310 compilers (such as SunOS4 /bin/cc) don't generally support it
1311 except in some contexts.
1313 Fri Mar 3 17:42:48 1995 Per Bothner <bothner@kalessin.cygnus.com>
1315 * valops.c (value_cast): Check for cast to array type *before*
1316 we coerce array to pointer (in case arg2 is already array).
1318 * valops.c (call_function_by_hand): Set using_gcc to 2 if using
1319 gcc2. Needed for REG_STRUCT_HAS_ADDR to work on sparc.
1320 Also check REG_STRUCT_HAS_ADDR for union, array and string types.
1322 * valops.c (call_function_by_hand): Re-arrange code for pushing
1323 paramaters on the stack so we can do better STACK_ALIGN.
1325 * valops.c (call_function_by_hand): Call error if the number
1326 of arguments is fewer than parameter types in function type.
1328 Fri Mar 3 17:13:05 1995 Doug Evans <dje@canuck.cygnus.com>
1330 * sparc-tdep.c (sparc_extract_struct_value_address): Move
1331 sparc64 support to here.
1332 (sparc64_extract_struct_value_address): Deleted.
1333 (dump_ccreg): Add a prototype so long long arg -> int.
1334 * sparc/tm-sp64.h (USE_STRUCT_CONVENTION): Define.
1335 (EXTRACT_STRUCT_VALUE_ADDRESS): Delete.
1337 Fri Mar 3 15:12:12 1995 Jeff Law (law@snake.cs.utah.edu)
1339 * hpread.c (hpread_record_lines): New argument "offset". All
1340 callers changed. Use it to handle dynamic address relocation.
1341 (hpread_build_psymtabs): Adjust texthigh as we read each function
1342 debug symbol. Fix computation of texthigh.
1343 (hpread_read_subrange_type): Work around macro bugs in HP's
1345 (hpread_process_one_debug_symbol): Correctly map source lines.
1347 * somread.c (check_strange_names): Filter names emitted by the HP
1348 compiler when generating PIC code.
1350 * valops.c (value_struct_elt_for_reference): Work around macro
1351 bugs in HP's compilers.
1352 * c-exp.y (block): Likewise.
1354 Fri Mar 3 12:27:28 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1356 * rs6000-tdep.c (push_dummy_frame): Fix order of arguments to
1359 * utils.c [_AIX]: Include stddef.h instead of #defining size_t.
1361 Fri Mar 3 12:33:24 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1363 * rs6000-tdep.c (skip_prologue): Skip multiple stores of the saved
1364 registers that GCC emits on the PowerPC by default in addition to
1365 the store multiple instruction used on the Power series.
1367 Fri Mar 3 00:54:58 1995 Doug Evans <dje@canuck.cygnus.com>
1369 * sparc-tdep.c (decode_asi): New function.
1370 (sparc_print_register_hook): Pretty print more v9 registers.
1371 * sparc/tm-sp64.h (REGISTER_NAMES): Fix some typos.
1373 Thu Mar 2 22:20:22 1995 Doug Evans <dje@canuck.cygnus.com>
1375 * dwarfread.c (struct dieinfo): Use CORE_ADDR for at_{low,high}_pc.
1376 (target_to_host): Change result type to CORE_ADDR.
1378 Thu Mar 2 15:13:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1380 * rs6000-tdep.c: Fix byte-swapping sins.
1382 Thu Mar 2 16:48:45 1995 Michael Meissner <meissner@cygnus.com>
1384 * rs6000-tdep.c (branch_dest): Minor code cleanup, don't share
1385 code between branch unconditional and branch conditional cases.
1387 Wed Mar 1 09:41:26 1995 Doug Evans <dje@canuck.cygnus.com>
1389 Various changes for sparc64.
1390 * sparc-tdep.c (NUM_SPARC_FPREGS): Define.
1391 (SPARC_INTREG_SIZE): Define.
1392 (*): Use SPARC_INTREG_SIZE instead of REGISTER_RAW_SIZE (intreg)
1394 (enum branch_type): New value `done_retry'.
1395 (isbranch): Renamed from isannulled. All callers changed.
1396 Support new sparc64 branch insns.
1397 (single_step): Handle done_retry.
1398 (sparc_extract_struct_value_address): Don't assume 4 byte regs.
1399 (get_saved_register): Likewise.
1400 (sparc_push_dummy_frame): Likewise.
1401 (sparc_frame_find_saved_regs): Likewise.
1402 (sparc_pop_frame): Likewise. Don't refer to FPS_REGNUM, CPS_REGNUM,
1403 or PS_REGNUM if not sparc64. sparc64 has 64 fp regs.
1404 (sparc64_extract_struct_value_address): New function.
1405 (dump_ccreg, sparc_print_register_hook): Likewise.
1406 * sp64-tdep.c: Deleted.
1407 * sparc/tm-sp64.h (GDB_TARGET_IS_SPARC64): Define.
1408 (NUM_REGS): Reduce by 2, cle/tle are in the pstate reg.
1409 (CC_HAS_LONG_LONG): Define.
1410 (REGISTER_NAMES): Delete cle/tle and reorganize.
1411 (PS_REGNUM, FPS_REGNUM, CPS_REGNUM): Delete, they're ifdef'd out of
1413 (REGISTER_BYTES): Update.
1414 (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Delete.
1415 (EXTRACT_RETURN_VALUE): Delete. Use definition in tm-sparc.h.
1416 (NO_SINGLE_STEP): Likewise.
1417 * sparc/tm-sparc.h (EXTRACT_VALUE_RETURN): Don't assume 4 byte regs.
1418 * sparc/sp64.mt: Move simulator support ...
1419 * sparc/sp64sim.mt: ... to here.
1421 Wed Mar 1 13:14:42 1995 Kung Hsu <kung@mexican.cygnus.com>
1423 * remote-vx960.c: new file for target specific register packaging.
1424 * remote-vx68.c: ditto.
1425 * config/i960/vxworks960.mt: add remote-vx960.o.
1426 * config/m68k/vxworks68.mt: add remote-vx68.o.
1428 Wed Mar 1 13:42:49 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1430 * remote.c (remote_wait): Make calls to strtol be type correct by
1431 passing the address of a char * pointer instead of an unsigned
1434 * rs6000-tdep.c (push_dummy_frame): Cast sp to char * when calling
1435 write_memory to make things type correct.
1437 Wed Mar 1 12:17:31 1995 Michael Meissner <meissner@cygnus.com>
1439 * ch-exp.y, c-exp.y, f-exp.y, m2-exp.y (yy defines): Support the
1440 standard Linux yacc by adding more names to be redefined with a
1443 Tue Feb 28 22:55:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1445 * hppa-tdep.c (pa_print_registers), monitor.c: Use
1446 extract_unsigned_integer and friends, not SWAP_TARGET_AND_HOST.
1447 * defs.h, findvar.c: Move SWAP_TARGET_AND_HOST back to findvar.c.
1448 Rename it to SWAP_FLOATING to make it clear it is no longer for
1451 Tue Feb 28 14:38:39 1995 Kung Hsu <kung@mexican.cygnus.com>
1453 * defs.h (SWAP_TARGET_AND_HOST): check endianess at runtime not
1457 * arc-tdep.c (_initialize_arc_tdep): set tm_print_insn according to
1459 * remote-arc.c (arc_wait): when a processor stops, stop other two
1461 * remote-arc.c (switch_command): switch tm_print_insn.
1464 * vx-share/ptrace.h: merge in WRS new ptrace requests.
1466 * defs.h: fix a syntax error.
1468 * a29k-tdep.c (get_longjmp_target): add this function, from WRS.
1469 * remote-vx.c: move read_register and write_register out to
1470 target specific files.
1471 * remote-vx29k.c (get_fp_contnets): add this function, from WRS.
1473 * defs.h: define SWAP_TARGET_AND_HOST macro.
1474 * findvar.c, monitor.c, hppa-tdep.c: remove definition of
1475 SWAP_TARGET_AND_HOST.
1477 Tue Feb 28 08:31:40 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1479 * alpha-tdep.c (find_proc_desc): Only attempt to set
1480 PROC_LOCALOFF (found_heuristic) if found_heuristic is non-NULL.
1482 Mon Feb 27 11:56:32 1995 Stan Shebs <shebs@andros.cygnus.com>
1484 * monitor.c: General gcc -Wall lint cleanup and reformat.
1485 (monitor_command): If no args, send an empty command.
1487 Thu Feb 23 21:07:25 1995 Stu Grossman (grossman@cygnus.com)
1489 * monitor.c (monitor_load_ascii_srec): Add a one second sleep
1490 after send LOAD_CMD to prevent loss of first S-record.
1492 Tue Feb 21 20:48:42 1995 Per Bothner <bothner@kalessin.cygnus.com>
1494 * valops.c (call_function_by_hand): Set using_gcc to 2 if gcc-2.
1495 Call error if too few arguments.
1496 If REG_STRUCT_HAS_ADDR (structs passed by invisible reference),
1497 copy and convert to reference *before* we calculate alignment.
1498 Also, make sure structs allocated for return values and invisible
1499 reference don't violate STACK_ALIGN.
1501 Tue Feb 21 23:29:59 1995 Per Bothner <bothner@rtl.cygnus.com>
1503 * ch-exp.y (expression_conversion): Recognize 'ARRAY () TYPE (EXPR)'
1504 (same as C's '(TYPE[])EXPR')
1506 Tue Feb 21 11:47:26 1995 Stan Shebs <shebs@andros.cygnus.com>
1508 * top.c (print_gdb_version): Update the year.
1510 Sun Feb 19 14:31:57 1995 Jim Kingdon <kingdon@rtl.cygnus.com>
1512 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Look for newlib in
1513 `..' not in `../..'.
1515 Sun Feb 19 11:05:28 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1517 * procfs.c (unconditionally_kill_inferior): Don't issue a PIOCKILL
1518 in addition to a PIOCSSIG to kill the inferior.
1520 Thu Feb 16 15:06:12 1995 Per Bothner <bothner@kalessin.cygnus.com>
1522 * parse.c (follow_types): Given (TYPE[]) (i.e. with no length),
1523 create a 0-length array type, and set BOUND_CANNOT_BE_DETERMINED.
1524 * valops.c (value_cast): If a cast like (TYPE[])VALUE (i.e. array
1525 of unknown length) use sizeof(VALUE)/sizeof(TYPE) as the length.
1526 * c-typeprint.c (c_type_print_varspec_suffix): If array length
1527 is 0, print it, but not if upper_bound is BOUND_CANNOT_BE_DETERMINED.
1529 Thu Feb 16 16:06:50 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1531 * dcache.c (insque, remque): Rewrite Linux support.
1533 Wed Feb 15 12:33:20 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1535 * config/powerpc/tm-ppc-eabi.h (TEXT_SEGMENT_BASE): Define as 1.
1537 * dcache.c (insque, remque): If compiling in standard C on Linux,
1538 protect insque and remque with macros to cast the pointer
1539 arguments to the proper type.
1541 Tue Feb 14 17:16:41 1995 Stu Grossman (grossman@cygnus.com)
1543 * annotate.c, breakpoint.c, defs.h, top.c: Replace
1544 enable/disable_breakpoint_hook with modify_breakpoint_hook.
1545 start-sanitize-gdbtk
1547 * gdbtk.c: General cleanups, get rid of unused variables. Redo
1548 handling of stdout/stderr to just return output as the result of
1549 the tcl command that caused the output. Cleanup -Wall stuff.
1550 * (breakpoint_notify): Now returns just action and breakpoint
1552 * (gdb_get_breakpoint_list): New routine. Does the obvious.
1553 * (gdb_get_breakpoint_info): Mostly derived from the old
1554 breakpoint_notify, but returns lots more info.
1555 * (dsprintf_append_element): Helper routine, works like printf,
1556 but appends a tcl element onto the specified DString. Good for
1557 building up lists as return values.
1558 * (gdbtk_enable/disable_breakpoint): Go away. Replaced with
1559 gdbtk_modify_breakpoint.
1560 * (*many routines*): Use new result protocol.
1561 * (call_wrapper): Make sure that recursive calls don't trash results.
1562 * gdbtk.tcl: New windows, autocmd, and breakpoints.
1563 * (gdbtk_tcl_fputs): Don't use $current_output_win redirection
1564 anymore. It's not needed (in fact, this routine may not be needed
1566 * (gdbtk_tcl_breakpoint): Change to reflect new breakpoint
1567 notification protocol.
1568 * (gdbtk_tcl_busy gdbtk_tcl_idle): Straighten out buttons, remove
1570 * (interactive_cmd): Use this wrapper around button invocations
1571 of many commands. This will catch errors and put the results into
1572 the command window. It also updates all the other windows.
1573 * Also, change reliefs of most things to sunken. This actually
1575 * (create_file_win): Fix margin binding to allow breakpoints to
1577 * (create_asm_win): Use return value of gdb_disassemble instead
1578 of implicit I/O to the command window.
1579 * (create_command_window): Use new result protocol to get output
1583 Tue Feb 14 16:58:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1585 * expression.h: Move declaration of evaluate_subexp_with_coercion
1587 * value.h: ...to here.
1588 * expression.h: Don't include value.h
1590 Tue Feb 14 11:46:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1592 * expression.h: Move include of value.h until after declaration of
1595 Sun Feb 12 13:47:30 1995 Stan Shebs <shebs@andros.cygnus.com>
1597 * remote-e7000.c: Comprehensive cleanup; removal of dead code,
1598 simplify code, declare things, format to standards.
1599 (inferior.h, value.h, command.h, remote-utils.h): Include.
1600 (e7000_login): Rename to e7000_login_command.
1601 (e7000_ftp): Rename to e7000_ftp_command.
1602 (e7000_drain): Rename to e7000_drain_command.
1604 * irix5-nat.c (string.h): Include near beginning of file.
1606 Sun Feb 12 12:36:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1608 * valops.c (value_arg_coerce): Use VALUE_TYPE not SYMBOL_TYPE on
1609 arg, it is a value not a symbol.
1612 * eval.c: Move declaration of evaluate_subexp_with_coercion from here..
1613 * expression.h: ..to here.
1614 * expression.h: Include value.h.
1615 * ch-lang.c (evaluate_subexp_chill): Add default case in switch.
1617 Sun Feb 12 11:03:47 1995 Per Bothner <bothner@kalessin.cygnus.com>
1619 * language.h (struct language_defn): New field evaluate_exp.
1620 * c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn),
1621 f-lang.c (f_language_defn), language.c (unknown_language_defn,
1622 auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn):
1623 Set evaluate_exp to evaluate_subexp_standard.
1624 * ch-lang.c (evaluate_subexp_chill): New function. Chill-specific
1625 support for MULTI_SUBSCRIPT.
1626 (chill_language_defn): Set evaluate_exp to evaluate_subexp_chill.
1627 * eval.c (enum noside): Move from here ....
1628 * expression.h (enum noside): ... to here.
1629 (evaluate_subexp_standard): New prototype.
1630 * eval.c (evaluate_subexp): Renamed to evaluate_subexp_standard.
1631 Removed lo-longer-needed test for chill_varying_type.
1632 (evaluate_subexp): New. Calls exp->language_defn->evaluate_exp.
1634 * ch-exp.y (maybe_expression_list): New non-terminal.
1635 (primitive_value): Allow empty parameter list.
1637 Sun Feb 12 10:02:16 1995 Per Bothner <bothner@cygnus.com>
1639 * buildsym.c (finish_block): If finishing a function without known
1640 parameter type info, set that from parameter symbols.
1641 * c-typeprint.c (c_type_print_varspec_suffix): For TYPE_CODE_FUNC,
1642 print parameter types, if available.
1643 * ch-typeprint.c (chill_type_print_base): Likewise.
1645 * gdbtypes.h (struct type): Remove function type field.
1646 (TYPE_FUNCTION_TYPE): Remove macro. We can't as simply re-use
1647 function types now that we're also storing parameter types.
1648 And the payoff is much less.
1649 * gdbtypes.c (make_function_type): Don't use/set TYPE_FUNCTION_TYPE.
1650 (recursive_dump_type): Don't print TYPE_FUNCTION_TYPE.
1651 * dwarfread.c (read_subroutine_type): Don't set TYPE_FUNCTION_TYPE.
1653 * valops.c (value_arg_coerce): Now takes param_type argument.
1654 (call_function_by_hand): Convert arguments with value_arg_coerce
1655 early, and overwrite original args with converted args.
1656 No longer need multiple calls to value_arg_coerce.
1657 (value_arg_push): Removed.
1658 * hppa-tdep.c (hppa_push_arguments): No longer call value_arg_coerce.
1659 * mips-tdep.c (mips_push_arguments): Likewise.
1660 * alpha-tdep.c (alpha_push_arguments): Likewise.
1661 * rs6000-tdep.c (push_arguments, ran_out_of_registers_for_arguments):
1663 * value.h (value_arg_coerce): Remove declaration. (It's now static.)
1665 * valops.c (value_cast): Do COERCE_VARYING_ARRAY after COERCE_REF.
1667 * symtab.c (add_param_to_type): Remove (commented-out) function,
1668 since that functionality has been re-written.
1669 * coffread.c: Remove commented-out add_param_to_type support.
1670 * mdebugread.c (parse_symbol): Likewise.
1671 * stabsread.c (define_symbol): Likewise.
1673 Sun Feb 12 09:03:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1675 * buildsym.c (start_subfile): Set language for f2c like for cfront.
1677 Thu Feb 9 20:20:11 1995 Rob Savoye <rob@darkstar.cygnus.com>
1679 * op50n-rom.c: Add the control registers.
1681 Thu Feb 9 15:46:39 1995 Stan Shebs <shebs@andros.cygnus.com>
1683 * Makefile.in (CLIBS): Add $(LIBIBERTY) before, in addition to
1684 after, any host/target/native libraries.
1685 * dcache.c (insque, remque): Remove declarations.
1686 * gdbtypes.h (type_code): Remove trailing comma.
1689 * xcoffread.c (read_xcoff_symtab) [C_HIDEXT]: Move #ifdef
1690 STATIC_NODEBUG_VARS inside case.
1692 Thu Feb 9 07:43:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1694 * config/sparc/tm-sun4sol2.h: Define STATIC_TRANSFORM_NAME.
1695 * partial-stab.h: Call it.
1696 * stabsread.c (define_symbol) [STATIC_TRANSFORM_NAME]: Call
1697 STATIC_TRANSFORM_NAME to get the name and use minimal symbols to
1699 * sparc-tdep.c (solaris_static_transform_name): New function.
1701 Thu Feb 9 12:09:09 1995 Jeff Law (law@snake.cs.utah.edu)
1703 * somread.c (som_symtab_read): Handle dynamic relocation for both
1704 text and data symbols.
1705 (som_symfile_offsets): If objfile is a shared library, then get
1706 text and data offsets from the shared library structures.
1707 * somsolib.c (som_solib_add): Copy the bfd pointer from the
1708 objfile rather than reopening the file again.
1709 (som_solib_section_offsets): New function.
1710 * somsolib.h (som_solib_section_offsets): Declare.
1712 Wed Feb 8 20:32:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1714 * config/sparc/tm-sun4sol2.h, dbxread.c: Rename
1715 N_SO_ADDRESS_MAYBE_MISSING to SOFUN_ADDRESS_MAYBE_MISSING.
1716 * symtab.h (minimal_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: Add
1718 * elfread.c (record_minimal_symbol_and_info),
1719 minsyms.c, symtab.h (prim_record_minimal_symbol_and_info): Return
1720 newly created symbol.
1721 * elfread.c (elf_symtab_read) [SOFUN_ADDRESS_MAYBE_MISSING]:
1722 Set filename field of minimal symbol.
1723 * symmisc.c (dump_msymbols) [SOFUN_ADDRESS_MAYBE_MISSING]:
1724 Print filename field.
1725 * minsyms.c, symtab.h (lookup_minimal_symbol): New arg sfile.
1726 * symm-tdep.c, somsolib.c, hppa-tdep.c, c-exp.y, f-exp.y,
1727 m2-exp.y, nindy-tdep.c, m3-nat.c, irix5-nat.c, hpread.c,
1728 os9kread.c, breakpoint.c, alpha-tdep.c, valops.c, symtab.c,
1729 printcmd.c, dbxread.c: Change callers to pass NULL for sfile.
1730 * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
1731 Find address of function from minimal symbols.
1732 * partial-stab.h, case 'f', 'F': Call find_stab_function_addr
1733 instead of getting pst->textlow from the stab.
1734 * minsyms.c (find_stab_function_addr): New function.
1736 Wed Feb 8 19:19:56 1995 Rob Savoye <rob@darkstar.cygnus.com>
1738 * monitor.c: Fix so all the output shows up in the GUI command
1741 Mon Feb 6 18:50:59 1995 Stan Shebs <shebs@andros.cygnus.com>
1743 * i386-tdep.c (_initialize_i386_tdep): Put void decl on separate
1744 line, so init.c generation works correctly.
1746 * arc-tdep.c (_initialize_arc_tdep): Ditto.
1749 Mon Feb 6 14:44:36 1995 Rob Savoye <rob@darkstar.cygnus.com>
1751 * config/mips/idt.mt: Add support for the lsi33k target.
1752 * config/sparc/sun4sol2.mh: Add support for ser-tcp.
1753 * array-rom.c: Finish the rest of the support commands needed by
1755 * mips-tdep.c: Add LSI33k register names and processor type.
1757 start-sanitize-gdbtk
1758 Sun Feb 5 20:32:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1760 * gdbtk.c (gdb_disassemble): Deference pointer to function before
1761 calling it (pre-ANSI compilers generally require this).
1764 Sat Feb 4 13:29:52 1995 Stan Shebs <shebs@andros.cygnus.com>
1766 * config/m68k/est.mt (TDEPFILES): Remove m68k-pinsn.o.
1768 Fri Feb 3 16:47:31 1995 Kung Hsu <kung@mexican.cygnus.com>
1770 * ser-go32-para.c (dos_read): fix syntax errors.
1772 Fri Feb 3 11:19:20 1995 Stu Grossman (grossman@cygnus.com)
1774 * core.c (dis_asm_read_memory), defs.h, top.c: Get rid of
1775 dis_asm_read_memory_hook. We can now call the disassemblers
1776 directly and have no need for this hook anymore.
1777 start-sanitize-gdbtk
1778 * gdbtk.c (gdb_disassemble): Ditto.
1780 * defs.h, printcmd.c: Make print_insn be static.
1782 * ser-go32.c (dos_comisr): Make this 8 bit clean.
1783 * (dos_open dos_close): Allow multiple opens to the same device.
1784 Use a ref count to prevent unwanted deallocations.
1785 * sparcl-tdep.c: Put #ifdefs around all socket stuff to make GO32
1787 * (sparclite_ops): Switch to download_stratum.
1788 * target.h (enum strata): Move download_stratum before
1789 process_stratum so that executable targets get pushed on top of
1792 Thu Feb 2 19:02:45 1995 Rob Savoye <rob@darkstar.cygnus.com>
1794 * array-rom.c: Remove the non GDB remote protocol config stuff.
1796 * monitor.c: All reading/writing functions for memory and
1799 Thu Feb 2 16:11:04 1995 Kung Hsu <kung@mexican.cygnus.com>
1802 * config/arc/arc.mt: new target makefile for arc processor.
1803 * config/arc/tm-arc.h: new target header for arc processor.
1804 * config/arc/go32.mh: new go32 host makefile for arc processor.
1805 * config/arc/xm-go32.h: new go32 host header for arc processor.
1806 * arc-tdep.c: new target dependent codes for arc processor.
1807 * remote-arc.c: new file for arc-specific protocol through
1810 * ser-go32-para.c: new file for go32 parallel port communication.
1812 Thu Feb 2 13:58:40 1995 Stan Shebs <shebs@andros.cygnus.com>
1814 * Makefile.in (VERSION): Bump to 4.13.2.
1816 Thu Feb 2 07:27:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1818 Fix compiler warnings:
1819 * remote-e7000.c (printf_e7000debug): Rename to puts_e7000debug
1820 and have the caller do the sprintf. Saves us from varargs hell.
1821 (normal): Define before use.
1822 * remote-e7000.c: Reindent a few things.
1824 Wed Feb 1 21:16:42 1995 Per Bothner <bothner@kalessin.cygnus.com>
1826 * f-typeprint.c (f_type_print_varspec_suffix): Print array index
1827 ranges in reverse order.
1828 * f-valprint.c (f77_create_arrayprint_offset_tbl): Fix calculation.
1830 * eval.c (evaluate_subscript): Don't call value_subscript, since
1831 it adjusts for lower bound and enforces ranges.
1833 * expression.h (exp_code): Remove MULTI_F77_SUBSCRIPT, OP_F77_SUBSTR.
1834 * eval.c, parse.c: Removed uses of removed opcodes.
1835 * eval.c (evaluate_subexp): Clean up handling of
1836 OP_UNDETERMINED_ARGLIST (no backtracking, more general).
1838 * f-valprint.c (f_val_print): Print TYPE_CODE_STRING using
1839 LA_PRINT_STRING, and not val_print_string (which reads from inferior).
1841 * ch-lang.c (chill_is_varying_struct), ch-lang.h: Remve function
1842 duplicate function made redundant by chill_varying_type.
1844 Re-write of f77 string and complex number support:
1846 * language.h (struct language_defn): New fields string_lower_bound
1847 and string_char_type.
1848 * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn),
1849 language.c (unknown_language_defn, auto_language_defn,
1850 local_language_defn), m2-lang.c (m2_language_defn), f-lang.c
1851 (f_language_defn), ch-lang.c (chill_language_defn): Set new fields.
1852 * gdbtypes.c (create_string_type): Use new string_char_type field.
1853 * valops.c (value_string): Use new string_lower_bound field.
1855 * defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT): Removed.
1856 * f-lang.c (f_create_fundamental_type, _initialize_f_language),
1857 m2-lang.c (m2_create_fundamental_type),
1858 gdbtypes.c (_initialize_gdbtypes): Set TYPE_TARGET_TYPE of complex
1859 types. Set their TYPE_CODEs to TYPE_CODE_COMPLEX.
1860 * mdebugread.c (mdebug_type_complex, mdebug_type_double_complex):
1861 Removed. Use builtin_type_complex and builtin_type_double_complex.
1863 * gdbtypes.h (enum type_code): Removed TYPE_CODE_LITERAL_STRING
1864 and TYPE_CODE_LITERAL_COMPLEX.
1865 * c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c: Removed uses of
1866 TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX.
1867 * gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type,
1868 f77_create_literal_string_type): Removed.
1869 * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR,
1870 VALUE_SUBSTRING_MYADDR): Removed.
1872 * expression.h (enum exp_opcode): Rename OP_F77_LITERAL_COMPLEX to
1874 * parse.c: Update accordingly.
1876 * f-valprint.c (f77_print_cmplx): Removed.
1877 (f_val_print case TYPE_CODE_COMPLEX): Re-write to use print_floating.
1879 * f-exp.y (STRING_LITERAL): Use OP_STRING instead of OP_ARRAY.
1880 * eval.c (evaluate_subexp): For case OP_ARRAY, don't call
1881 f77_value_literal_string.
1882 * valops.c, value.h (f77_value_literal_string, f77_value_substring,
1883 f77_assign_from_literal_string, f77_assign_from_literal_complex):
1885 (value_assign): No longer need to handle literal types.
1886 * valops.c (f77_value_literal_complex), value.h: Re-written and
1887 renamed to value_literal_complex. Last arg is now a (complex) type.
1888 * valops.c (f77_cast_into_complex): Re-written and renamed to
1890 * eval.c (evaluate_subexp): Update accordingly.
1892 * ch-valprint.c (chill_val_print): On TYPE_CODE_STRING, don't
1893 print address for non-'s'-formats.
1894 * ch-typeprint.c, ch-valprint.c: Use chill_varying_type instead
1895 of chill_is_varying_struct.
1897 Wed Feb 1 13:27:33 1995 Stan Shebs <shebs@andros.cygnus.com>
1900 * alpha-tdep.c (alpha_in_lenient_prologue): Comment out.
1901 (after_prologue): Remove unused local b.
1902 * procfs.c (thread.h): Include.
1903 (pr_flag_table, pr_why_table, faults_table, siginfo_table): Use
1904 nested braces in initializer.
1905 * top.c (initialize_targets, initialize_utils): Declare.
1906 (locate_arg, insert_args): Add parens around tested assignments.
1907 * remote-utils.c (sr_scan_args): Remove decl of strtol.
1908 * remote.c (thread.h): Include.
1909 (remote_wait): Remove unused local p2.
1910 * sparc-tdep.c (fill_gregset, fill_fpregset): Remove decls of
1913 defs.h (stdlib.h): Include.
1914 (exit, perror, atoi, qsort, memcpy, memcmp): Don't declare.
1915 (fclose, atof, malloc, realloc, free, strchr, strrchr, strstr,
1916 strtok, strerror): Don't specify parameter types in declaration.
1918 Wed Feb 1 12:23:57 1995 Per Bothner <bothner@kalessin.cygnus.com>
1920 * ch-exp.y (value_string_element, string_primitive_value,
1921 start_element, left_element, right_element, slice_size,
1922 lower_element, upper_element, first_element): Removed.
1923 (value_string_slice, value_array_slice): Replaced by ...
1924 (slice): New non-terminal, with working slice support.
1925 (primitive_value_lparen, rparen): New non-terminals.
1926 (maybe_tuple_elements): New non-terminal, to allow empty tuples.
1927 (idtokentab): Added "up".
1929 * value.h (COERCE_VARYING_ARRAY): New macro.
1930 * valarith.c (value_subscript): Use it.
1931 * valops.c (value_cast): Likewise. Also, do nothing if already
1932 correct type, and allow converting from/to range to/from scalar.
1934 * valops.c, value.h (varying_to_slice, value_slice): New functions.
1935 * eval.c (OP_ARRAY): Add cast for array element.
1936 * expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT): New exp_opcodes.
1937 * valops.c (chill_varying_type): Moved function frp, here ...
1938 * gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here.
1939 * parse.c (length_of_subexp, prefixify_subexp): Add support
1940 for TERNOP_SLICE, TERNOP_SLICE_COUNT.
1941 * expprint.c (print_subexp, dump_expression): Likewise.
1942 * eval.c (evaluate_subexp): Likewise.
1944 * eval.c (evaluate_subexp case MULTI_SUBSCRIPT): Don't call
1945 value_x_binop on a Chill varying string.
1947 Tue Jan 31 13:51:53 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1949 * config/m68k/monitor.mt,
1950 config/pa/{hppabsd.mt,hppahpux.mt,hppaosf.mt,hppapro.mt}: Put
1951 depfiles in TDEPFILES not REMOTE_O.
1953 Tue Jan 31 11:14:44 1995 Steve Chamberlain <sac@splat>
1955 From nigel@algor.co.uk.
1956 * ser-go32.c (dos_close): Don't crash if scb null.
1957 (dos_sendbreak): New function.
1958 (dos_ops): Point to dos_sendbreak.
1959 (dos_info): Calculate COM number correctly.
1961 Tue Jan 31 09:40:11 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1963 * xcoffread.c (process_xcoff_symbol): Use new variables
1964 func_symbol_type and var_symbol_type as type of functions and
1965 variables which don't have any stabs associated with them.
1966 Reindent most of function.
1967 (_initialize_xcoffread): Initialize *_symbol_type.
1969 * xcoffread.c (read_xcoff_symtab): Reindent most of function.
1970 Put C_HIDEXT symbols in the minimal symbols, rather than ignoring
1971 them (this part commented out as I didn't quite get it to work).
1972 (cs_to_section, find_targ_sec): New functions, to support above code.
1973 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is
1976 Mon Jan 30 17:34:24 1995 Stu Grossman (grossman@cygnus.com)
1977 start-sanitize-gdbtk
1978 * gdbtk.tcl (create_file_win): Disable old popup menu for source
1981 * sparcl-tdep.c: Add `sparclite' target for doing serial and udp
1982 downloads to SPARClite demo boards.
1984 Sun Jan 29 09:43:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1986 * remote.c, remote-pa.c: Remove #if 0'd icache code. It has had
1987 no hope of working as is for a long time (in particular, shebs' 27
1988 Jan 95 change confuses the issue further--target_read_memory and
1989 xfer_core_file do *not* do the same thing in this context).
1992 Sat Jan 28 13:40:46 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1994 * elfread.c (elf_symtab_read): Do not test BSF_GLOBAL for
1995 procedure linkage table symbols, it is no longer set due to the
1996 Jan 6 BFD change in bfd/elfcode.h.
1998 Fri Jan 27 17:08:06 1995 Stan Shebs <shebs@andros.cygnus.com>
2000 * top.c (use_windows): Clarify comments.
2002 * convex-tdep.c (xfer_core_file): Comment out.
2003 * config/convex/tm-convex.h (XFER_CORE_FILE): Remove.
2004 * remote.c, remote-pa.c (remote_fetch_word): Change xfer_core_file
2005 references to target_read_memory.
2006 * gdbcore.h (xfer_core_file, core_open, core_detach): Remove
2008 * corelow.c (core_open, core_detach): Make static.
2010 * arm-tdep.c: Make it compile.
2011 (exec_file_command, xfer_core_file): Comment out.
2012 (arm_print_insn): Remove, now in libopcodes.
2013 (skip_prologue): Comment out most of body.
2014 (arm_frame_find_saved_regs): Move here from tm-arm.h.
2015 (_initialize_arm_tdep): Set tm_print_insn.
2016 * config/arm/tm-arm.h: Remove old refs to first_object_file_end.
2017 (XFER_CORE_FILE): Remove.
2018 (FRAME_FIND_SAVED_REGS): Call arm_frame_find_saved_regs.
2020 Fri Jan 27 08:48:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2022 * Makefile.in (CHILL_LIB): Define as in testsuite/Makefile.in.
2024 Thu Jan 26 18:24:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2026 * symtab.c (find_pc_line): When subtracting one to get a line
2027 number, make sure not to end up with zero.
2029 * remote-vx.c: Revert all of Kung's changes of 16 Jan. The
2030 problems with those changes were (a) the file didn't compile, (b)
2031 they changed memset to bzero--memset is correct, (c) they took out
2032 code to deal with boards lacking floating point, (d) who knows
2033 what I didn't discover in a quick read.
2035 Thu Jan 26 17:32:54 1995 Stu Grossman (grossman@cygnus.com)
2037 * sparcl-tdep.c: Clean up formatting and indentation.
2039 Thu Jan 26 10:49:59 1995 Steve Chamberlain <sac@splat>
2041 * remote-hms.c (hms_ops): Change ref of hr_load_image
2043 (dcache_flush, dcache_hit, dcache_value, dcache_fetch,
2044 dcache_poke, dcache_init): Deleted.
2045 (hms_open, hms_resume, hms_fetch_word, hms_store_word):
2046 Use dcache routines provided by remote-util.h
2048 Thu Jan 26 12:08:31 1995 Michael Meissner <meissner@cygnus.com>
2050 * configure.in: Add support for powerpc-*-eabi.
2052 * powerpc/tm-ppc-eabi.h, powerpc/pcc-eabi.mt: New files for
2055 Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
2057 * language.h (struct language_defn): New field c_style_arrays.
2058 * language.c (unknown_language_defn, auto_language_defn,
2059 local_language_defn), c-lang.c (c_language_defn, cplus_language_defn,
2060 asm_language_defn): Set c_style_arrays to true.
2061 * m2-lang.c (m2_language_defn), ch-lang.c (chill_language_defn),
2062 f-lang.c (f_language_defn): Set c_style_arrays to false.
2063 * valops.c (value_string): If c_style_array is not set,
2064 allocate string in gdb (not inferior) using allocate_value.
2066 * value.h (COERCE_ARRAY), valops.c (value_addr, value_arg_coerce):
2067 Only call value_coerce_array if current_language->c_style_arrays.
2068 * values.c: Add #include "language.h". (Needed for COERCE_ARRAY.)
2070 * valops.c (chill_varying_type): New predicate.
2071 * valops.c (value_cast): Support assigning a fixed string or array
2072 to a variable string/array structure.
2074 * valarith.c (value_subscripted_rvalue): Extra parameter lowerbound.
2075 Check index>=lowerbound, and then add lowerbound to index here,
2076 instead of in caller. Generalize to arbitrary lval_types.
2077 (value_subscript): Use enhanced value_subscripted_rvalue if
2078 c_style_arrays is false (and index is in range).
2080 start-sanitize-gdbtk
2081 Wed Jan 25 18:23:46 1995 Stu Grossman (grossman@cygnus.com)
2083 * gdbtk.c (gdbtk_init): Prevent segfault when gdbtk.tcl can't be
2085 * gdbtk.tcl: Initialize expr_update_list() to prevent errors when
2086 popping up expression window for the first time.
2089 Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
2091 * eval.c (evaluate_subexp case OP_ARRAY): Fix calls to memset:
2092 TYPE_LENGTH is length in bytes, not bits.
2094 Wed Jan 25 08:19:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2096 * infrun.c (proceed): Flush stdout before resuming inferior.
2097 * infcmd.c (step_1), annotate.c (annotate_starting):
2098 Don't bother to flush here.
2100 Wed Jan 25 01:11:21 1995 Jeff Law (law@snake.cs.utah.edu)
2102 * hpread.c (hpread_process_one_debug_symbol): Fix lines garbled
2103 by an ill-advised global search and replace.
2105 Tue Jan 24 12:10:28 1995 Stu Grossman (grossman@cygnus.com)
2107 * gdbtk.tcl (create_registers_window): Work around a radiobutton
2108 widget bug to make Options|Natural button work.
2110 * gdbtk.c (gdb_disassemble): Fix problem with source+assembly and
2111 g++ caused by out-of-order pc's.
2112 * gdbtk.tcl (files_command): Remove duplicate file names. Also,
2115 Mon Jan 23 17:21:09 1995 Stu Grossman (grossman@cygnus.com)
2117 * gdbtk.tcl: Take .gdbtkinit if it exists. Makes gdbtk match the
2120 Mon Jan 23 13:11:46 1995 Per Bothner <bothner@kalessin.cygnus.com>
2122 Add support for Chill bitstring literals (e.h. H'FF00').
2123 * ch-exp.y (match_bitstring_literal): Fix for proper endianness.
2124 * expprint.c (print_subexp): Don't call error on OP_BITSTRING,
2125 just print B'<unimlemented>'.
2126 * gdbtypes.c (create_set_type): Fix bug in length calculation.
2127 * valops.c, value.h (value_bitstring): New function.
2128 * eval.c (evaluate_subexp): Implement support for OP_BITSTRING.
2130 * ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC,
2131 check that return type is non-void, and print in proper Chill syntax.
2133 Mon Jan 23 12:20:34 1995 Rob Savoye <rob@darkstar.cygnus.com>
2135 * Makefile.in: Remove references to remote-mon.c.
2136 * remote-mon.c: remove. Replaced by rom68k-rom.c.
2137 * rom68k-rom.c: Support for Rom68k monitor.
2139 Mon Jan 23 10:50:57 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2141 * Makefile.in (CHILL_FOR_TARGET): Update -L argument to point to
2142 gcc/ch/runtime not chillrt, since that is where the chill runtime
2145 Mon Jan 23 00:06:57 1995 Steve Chamberlain <sac@splat>
2147 * remote-hms.c (hms_load): Delete.
2148 (target_ops): Use hr_load_image.
2150 * remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops):
2151 Define memory_insert/remove_breakpoint.
2152 * xm-go32.h: Remove redundant SIGs.
2154 Thu Jan 19 20:26:58 1995 Steve Chamberlain <sac@splat>
2156 * ser-go32.c: Rewritten by nigel@algor.co.uk.
2158 Fri Jan 20 15:23:55 1995 Per Bothner <bothner@kalessin.cygnus.com>
2160 * expression.h (OP_LABELED): New operator, for Chill
2161 labeled structre tuples.
2162 * ch-exp.y (tuple_element, named_record_element, tuple_elements):
2163 New non-terminals, to handle labeled structure tuples.
2164 (tuple): Re-define using tuple_elements.
2165 * eval.c (evaluate_labeled_field_init): New function, to handle
2166 initialization of structure fields, possibly using OP_LABELED.
2167 (evaluate_subexp): Use it.
2168 * expprint.c (print_subexp case): For OP_ARRAY, use Chill syntax
2169 for Chill. Handled OP_LABELED.
2170 * parse.c (length_of_subexp, prefixify_subexp): Handle OP_LABELED.
2172 * eval.c (evaluate_subexp): Handle Chill Powerset tuples.
2173 * valarith.c (value_bit_index): Just treat bitstring as represented
2174 by an array of bytes. Alignment is handled by compiler.
2176 Wed Jan 18 19:00:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2178 * h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info).
2179 * sh-tdep.c (gdb_print_insn_sh): Ditto.
2181 Wed Jan 18 11:25:43 1995 Kung Hsu <kung@mexican.cygnus.com>
2183 * remote-os9k.c (rombug_open): Fix a bug in exception handling
2185 * remote-os9k.c (rombug_write_inferior_memory): reset buffer after
2188 Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
2190 * parse.c (_initialize_parse): Improve wording of names of
2193 Tue Jan 17 14:00:58 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2195 * config/mips/tm-mips.h (enum mips_fpu_type): New enum.
2196 (mips_fpu): Change type to enum mips_fpu_type.
2197 (FIX_CALL_DUMMY): Handle mips_fpu == MIPS_FPU_SINGLE.
2198 * mips-tdep.c (mips_fpu): Change type to enum mips_fpu_type.
2200 (mips_fpu_string): New static variable.
2201 (mips_push_dummy_frame): Handle mips_fpu == MIPS_FPU_SINGLE.
2202 (mips_pop_frame): Likewise.
2203 (mips_extract_return_value): Likewise.
2204 (mips_store_return_value): Likewise.
2205 (mips_set_fpu_command): New static function.
2206 (mips_show_fpu_command): New static function.
2207 (_initialize_mips_tdep): Change handling of set/show mipsfpu.
2209 Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
2211 * a29k-tdep.c (gdb_print_insn_a29k): Fix typo (&info -> info).
2213 * parse.c (write_exp_msymbol): Use new variables
2214 msym_*_symbol_type as type of msymbol expression.
2215 (_initialize_parse): Initialize them.
2217 Mon Jan 16 18:11:03 1995 Stan Shebs <shebs@andros.cygnus.com>
2219 General cleanup and simplication of disassembler interface.
2220 * a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c,
2221 hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c,
2222 m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c,
2223 rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove.
2224 * gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files,
2225 had been -pinsn.c files.
2226 * Makefile.in (ALLDEPFILES): Remove removed files.
2227 (a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o,
2228 hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o,
2229 m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o,
2230 rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o):
2231 Remove compile actions.
2232 * arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o,
2233 vax-tdep.o: Add compile actions.
2234 * defs.h (tm_print_insn): New global.
2235 * a29k-tdep.c (gdb_print_insn_a29k): New function.
2236 (_initialize_a29k_tdep): Rename from _initialize_29k,
2238 * alpha-tdep.c (print_insn): Remove.
2239 (_initialize_alpha_tdep): Set tm_print_insn.
2240 * arm-tdep.c (arm_print_insn): New function, was print_insn
2242 * convex-tdep.c (convex_print_insn): New function, was print_insn
2244 * h8300-tdep.c (print_insn): Remove.
2245 (gdb_print_insn_h8300): New function.
2246 (_initialize_h8300_tdep): New function.
2247 * h8500-tdep.c (print_insn): Remove.
2248 (_initialize_h8500_tdep): New function.
2249 * hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn.
2250 * i386-tdep.c (_initialize_i386_tdep): New function.
2251 * i960-tdep.c (mem, next_insn): New functions, were in
2253 (_initialize_i960_tdep): Set tm_print_insn.
2254 * m68k-tdep.c (_initialize_m68k_tdep): New function.
2255 * m88k-tdep.c (_initialize_m88k_tdep): New function.
2256 * mips-tdep.c (gdb_print_insn_mips): New function.
2257 (_initialize_mips_tdep): Set tm_print_insn.
2258 * pyr-tdep.c (pyr_print_insn): New function, was print_insn
2260 * rs6000-tdep.c (_initialize_rs6000_tdep): New function.
2261 * sh-tdep.c (print_insn): Remove.
2262 (gdb_print_insn_sh): New function.
2263 (_initialize_sh_tdep): Set tm_print_insn.
2264 * sparc-tdep.c (_initialize_sparc_tdep): New function.
2265 * w65-tdep.c (print_insn): Remove.
2266 (_initialize_w65_tdep): New function.
2267 * z8k-tdep.c (print_insn): Remove.
2268 (gdb_print_insn_z8k): New function.
2269 (_initialize_z8k_tdep): Set tm_print_insn.
2270 * printcmd.c (print_insn): New function, generic disassembler.
2271 * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o.
2273 Mon Jan 16 15:43:29 1995 Kung Hsu <kung@mexican.cygnus.com>
2275 * Makefile.in: add new files remote-vx29k.c, config/a29k/tm-vx29k.h,
2276 and config/a29k/vx29k.mt.
2277 * configure.in: add new configuration a29k-*-vxworks.
2278 * remote-vx29k.c: new file merged from WRS.
2279 * remote-vx.c: merge changes from WRS.
2280 * config/a29k/vx29k.mt: new file for new configuration.
2281 * config/a29k/tm-vx29k.h: new header file for newconfiguration.
2283 Sun Jan 15 14:36:19 1995 Steve Chamberlain <sac@splat>
2285 * breakpoint.h (disable_breakpoint, enable_breakpoint):
2287 (enum bpdisp): Change name of 'delete' member to 'del'.
2288 (struct bpstat): Changed name to 'bpstats'.
2289 * breakpoint.c (disable_breakpoint, enable_breakpoint,
2290 breakpoint_chain): Made globally visible.
2291 (bpstat_stop_status): Use new name for bpstat.
2292 (break_command_1, watch_command_1, catch_command_1,
2293 breakpoint_auto_delete, denable_delete_breakpoint): Use 'del'
2294 instead of 'delete'.
2295 (set_breakpoint_sal): New function.
2296 * defs.h (registers_changed_hook): New declaration.
2297 * infcmd.c (run_stack_dummy): 'delete' is now 'del'.
2298 * inflow.c (new_tty): Treat WIN32 in same way as __GO32__
2299 * main.c (main): Don't scan options when in WIN32 and exit
2300 without entering main loop.
2301 * m2-exp.y (m2_elx): Member 'class' is now 'aclass'.
2302 * symtab.h (struct symbol, struct partial_symbol): Changed name of
2303 member 'class' to 'aclass'.
2304 (SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change.
2305 * top.c (registers_changed_hook): New definition.
2306 * utils.c (quit, notice_quit, initialize_utils): Treate WIN32
2307 in same way as __GO32__.
2308 * value.h (c_typedef_print): Rename 'new' argument.
2310 * w65-tdep.c, config/tm-w65.h, config/w65.mt: New files.
2311 * configure.in: Suppprt for w65,
2314 Sat Jan 14 11:18:11 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
2316 * infcmd.c (signal_command): For "signal 0", pass (CORE_ADDR)-1,
2317 not stop_pc, to proceed.
2319 * eval.c (evaluate_subexp): Clear expect_type except for C++ and CHILL.
2321 Fri Jan 13 17:52:57 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
2323 * infcmd.c (signal_command): Accept "signal 0"; the change to not
2324 accept it was accidental. "handle 0" and "info signal 0" remain
2327 Fri Jan 13 15:19:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2329 * Makefile.in (all): Don't make libgdb-files.
2330 (libgdb): New action, makes libgdb-files.
2332 Thu Jan 12 21:23:25 1995 Per Bothner <bothner@kalessin.cygnus.com>
2334 * stabsread.c (read_enum_type): When pending enum symbols are
2335 put into the enum type, they must be inserted in "backwards
2336 order, in case we've overflowed a struct pending buffer.
2338 start-sanitize-gdbtk
2339 Thu Jan 12 15:02:40 1995 Stu Grossman (grossman@cygnus.com)
2341 * gdbtk.c, gdbtk.tcl: Update/add copyright.
2342 * gdbtk.tcl (build_framework): Several fixes for filespec widget,
2343 including dismiss button, and better error handling.
2344 * (create_command_win): Bind button 2 to retrieve selection.
2347 Thu Jan 12 09:33:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2349 * README: Add note about SPARCworks cc release 3.0 and higher.
2351 Add procfs support for Alpha OSF/1-2.x.
2352 * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic
2353 OSF/1 native support.
2354 * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly.
2355 (MUNCH_DEFINE): Removed.
2356 * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files
2358 * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1
2359 release 2.x and higher, else alpha-osf1.mh, as the procfs support
2360 in release 1.x is incomplete.
2361 * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh.
2362 * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
2363 fill_fpgregset): New routines for procfs support.
2364 * inftarg.c (_initialize_inftarg): Don't add ptrace support
2365 if we have an optional procfs and /proc is accessible.
2366 * procfs.c: Include sys/fault.h and sys/syscall.h before
2367 including sys/procfs.h.
2368 (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL
2369 is defined, additionally perform a PIOCSSIG to really terminate
2371 (create_procinfo): Always return a result.
2372 (create_procinfo, do_attach): Don't trace T_IFAULT faults if
2373 PROCFS_DONT_TRACE_IFAULT is defined.
2374 (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as
2375 argument to startup_inferior if it is defined.
2376 (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead
2377 of tracing exits from exec system calls. Needed for the user level
2378 loader under Alpha OSF/1.
2379 (do_detach): Clear any pending signal if we want to detach from
2380 a process without a signal.
2381 (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
2382 don't issue a PIOCSSIG if pr_cursig already contains the signal we
2384 (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the
2385 pending signals are numbered from 1 instead of 0.
2386 (info_proc_mappings): Increase size of output format for addresses
2387 if BFD_HOST_64_BIT is defined.
2388 (procfs_stop): Renamed from child_stop.
2389 (_initialize_procfs): Don't add procfs support if we have an
2390 optional procfs and /proc is not accessible.
2392 start-sanitize-gdbtk
2393 Wed Jan 11 17:06:55 1995 Stu Grossman (grossman@cygnus.com)
2395 * gdbtk.tcl: Add button to control mixed source disassembly.
2396 Use text widgets in expr window. The give me more control over
2398 Add auto-updating of exprs in expression window.
2399 Handle expressions out of scope a bit better.
2400 Make selected window pop up to the top when invoked via the
2402 Make copyright message have raised relief.
2404 * gdbtk.c (gdbtk_init): Improve handling for errors in gdbtk.tcl
2408 Wed Jan 11 17:53:26 1995 Rob Savoye <rob@darkstar.cygnus.com>
2410 * array-rom.c: Add support for most commands.
2412 * monitor.c: Add GDB remote protocol for the hybrid environment on
2415 Wed Jan 11 00:44:01 1995 Jeff Law (law@snake.cs.utah.edu)
2417 * command.c (show_user_1): Use print_command_line to show a user
2418 defined command (including control structures).
2420 * top.c (init_main): Change documentation for user defined
2421 commands to indicate they may accept up to ten arguments.
2423 Tue Jan 10 16:22:41 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
2425 * mips-tdep.c (mips_skip_prologue): Accept or as well as addu for
2426 `move $s8, $sp' instruction.
2428 Sun Jan 8 12:45:34 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2430 * target.c, target.h (target_signal_from_command): New function.
2431 * infrun.c (handle_command, signals_info), infcmd.c
2432 (signal_command): Use it.
2433 * infrun.c, infcmd.c: Update docstrings for these commands.
2435 * target.h (enum target_signal), target.c (signals), target.c
2436 (target_signal_from_host, target_signal_to_host): Add
2437 TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx.
2438 * config/tm-lynx.h: Define signal numbers for realtime events.
2440 Sat Jan 7 07:23:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2442 * dbxread.c (process_one_symbol): Handle N_FUN symbols
2443 for Sun acc 3.0 under SunOS4.
2445 Changes to improve handling of runtime common symbols
2447 * minsyms.c (get_symbol_leading_char): New routine to determine
2448 the leading symbol character for an objfile.
2449 (prim_record_minimal_symbol_and_info, install_minimal_symbols):
2451 * objfiles.h (rt_common_objfile): New global, points to objfile
2452 containing the runtime common minimal symbols.
2453 * objfiles.c (free_objfile): Mark rt_common_objfile as
2454 unallocated before freeing it.
2455 * solib.c (allocate_rt_common_objfile): New routine to allocate
2456 an objfile for the runtime common minimal symbols.
2457 (solib_add_common_symbols): Allocate an objfile for the runtime
2458 common symbols if necessary and put common symbols into it.
2459 Clean up code and comments.
2460 (solib_add, special_symbol_handling): Cleanup comments regarding
2461 runtime common symbols.
2462 * stabsread.c (scan_file_globals_1): New routine, contains
2463 old scan_file_globals code. Checks if there are any unresolved
2464 global symbols before starting the expensive minimal symbol table
2466 (scan_file_globals): Now calls scan_file_globals_1 for the passed
2467 objfile and eventually for the runtime common objfile. Complains
2468 about any unresolved global symbols and removes them from the
2469 global symbol chain to avoid dangling pointers into the symbol
2470 table if the symbol table is reread.
2472 Thu Jan 5 17:38:29 1995 Stu Grossman (grossman@cygnus.com)
2474 * Makefile.in (install_only uninstall): Indent for clarity.
2476 * core.c (dis_asm_read_memory): Add call to
2477 dis_asm_read_memory_hook to provide alternate way for disassembler
2480 * defs.h: Protect from multiple inclusion. Add decl for
2481 dis_asm_read_memory_hook.
2483 * top.c: Make window startup be the default.
2484 * Add dis_asm_read_memory_hook.
2486 start-sanitize-gdbtk
2487 * gdbtk.c (finish_saving_output): Don't do anything if not saving
2489 * (breakpoint_notify): Don't send null filename to tcl.
2490 * (gdb_eval): New tcl command to eval an expression.
2491 * (gdb_disassemble): New tcl command to do disassembly. This
2492 allows tcl code to choose between exec file and target memeory,
2493 and can also do mixed source and assembly.
2494 * (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure
2495 that more of the environment is set up. Also, create link between
2496 gdb and tcl vars disassemble{-_}from{-_}exec.
2498 * gdbtk.tcl: New expression window support.
2499 * Make assembly window be 80 columns wide.
2500 * Use new disassembly method. Add menu items to select
2501 disassembly from exec file or target.
2502 * Change View menubar item to Options.
2504 * Get rid of Stack, Breakpoints, Signals, and Variables Windows,
2505 since they don't exist yet.
2507 * Pop up a copyright window on startup.
2510 Thu Jan 5 01:16:40 1995 Jeff Law (law@snake.cs.utah.edu)
2512 * stabsread.c (define_symbol): Handle `a' symbol type used for
2513 reference parameter passed in a register.
2515 start-sanitize-gdbtk
2516 Wed Jan 4 19:49:10 1995 Stan Shebs <shebs@andros.cygnus.com>
2518 * gdbtk.tcl (build_framework): Add standard commands menu, more
2519 windows to standard windows menu.
2520 (not_implemented_yet): Clarify message.
2523 Wed Jan 4 12:27:29 1995 Kung Hsu <kung@mexican.cygnus.com>
2525 * defs.h: move include tm.h up, so that the type LONGEST can
2526 also based on the target requirement to determine. In this case
2529 * remote-os9k.c (rombug_open): catch exception e in rombug.
2530 * remote-os9k.c (rombug_wait): print message before register display
2533 Wed Jan 4 09:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2535 * top.c (locate_arg): Call strchr not index.
2537 Tue Jan 3 16:52:03 1995 Per Bothner <bothner@kalessin.cygnus.com>
2539 * ch-exp.y (literal): Recognize NULL.
2540 (tuple): Parse simple unlabelled tuples.
2541 * eval.c (evaluate_subexp case OP_ARRAY): Use expect_type to
2542 evaluate brace-initializer-expressions depending on context.
2543 (evaluate_subexp case UNOP_CAST): Pass the target type as
2544 expected type when evaluating the expression.
2546 * ch-typeprint.c (chill_type_print_base): Get names of PTR and
2547 BOOL from TYPE_NAME.
2548 * ch-valprint.c (chill_print_type_scalar): New function, to handle
2549 TYPE_CODE_RANGE better than print_type_scalar does.
2550 (chill_val_print_array_elements): Use above new function.
2552 Mon Jan 2 15:02:51 1995 Stan Shebs <shebs@andros.cygnus.com>
2554 * remote-udi.c (udi_load): Tell symbol_file_add that the
2555 program being loaded is the main program.
2557 For older changes see ChangeLog-94
2563 version-control: never