1 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
3 * objc-lang.c (objc_objfile_data): New variable.
4 (find_methods): Skip objfiles without Obj-C methods.
5 (_initialize_objc_lang): New function.
7 2009-05-13 Joel Brobecker <brobecker@adacore.com>
9 * c-lang.c (print_wchar): Remove unnecessary cast.
11 2009-05-12 Jim Blandy <jimb@red-bean.com>
13 * MAINTAINERS: Remove self as m32c target maintainer.
15 2009-05-12 Pedro Alves <pedro@codesourcery.com>
17 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
18 * command.h (deprecated_add_set_cmd): Delete declaration.
19 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
20 'set debug gnu-nat' and 'show debug gnu-nat'.
21 * i386-nat.c (_initialize_i386_nat): Replace 'maint
22 show-debug-registers' with 'maint set show-debug-registers' and
23 'maint show show-debug-registers'.
24 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
25 show-debug-registers' with 'maint set show-debug-registers' and
26 'maint show show-debug-registers'.
28 2009-05-12 Joel Brobecker <brobecker@adacore.com>
30 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
31 pushing it on the output obstack.
33 2009-05-11 Joel Brobecker <brobecker@adacore.com>
35 Fix internal error on breaking at a multi-locations caller source line.
36 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
37 command with no parameters.
39 2009-05-11 Pedro Alves <pedro@codesourcery.com>
41 * linux-nat.c (enum sigchld_state): Delete.
42 (linux_nat_async_events_state): Delete.
43 (struct waitpid_result): Delete.
44 (waitpid_queue): Delete.
45 (queued_waitpid_1): Delete.
46 (async_file_flush): New.
47 (queued_waitpid, push_waitpid): Delete.
48 (async_file_mark): New.
49 (drain_queued_events): Delete.
50 (my_waitpid): Remove locally queued events handling.
51 (linux_test_for_tracefork): Upjust.
52 (linux_child_follow_fork): Ditto.
53 (sync_sigchld_action): Delete.
54 (blocked_mask): Reinstate.
55 (async_sigchld_action): Rename to...
56 (sigchld_action): ... this.
57 (block_child_signals): New.
58 (restore_child_signals_mask): New.
59 (lin_lwp_attach_lwp): Adjust.
60 (linux_nat_create_inferior): Ditto.
61 (linux_nat_attach): Also use lp->status in async mode.
62 (get_pending_status): Don't use queued_waitpid.
63 (linux_nat_detach): Don't drain locally queued events.
64 (linux_nat_resume): Allow pending wait statuses stored lp->status
65 in async mode. If returning early due to a pending event,
66 re-register the event source.
67 (stop_wait_callback): Allow pending wait statuses stored
68 lp->status in async mode.
69 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
70 (linux_nat_wait): Rename to ...
71 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
72 lp->status in async mode. Always add WNOHANG to the waitpid
73 options in async mode.
74 (linux_nat_wait): New.
75 (kill_callback): Don't drain locally queued events.
76 (sigchld_handler): Rewrite.
77 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
78 refer to "set target-async".
79 (linux_nat_async_mask): If in non-stop, and re-enabling async
80 mode, re-register the target event source in the event loop.
81 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
82 (get_pending_events, async_sigchld_handler)
83 (linux_nat_async_events): Delete.
84 (handle_target_event): New.
85 (linux_nat_async_file_handler): Delete.
86 (linux_async_pipe): New.
87 (linux_nat_async): Only re-register in the event loop if not
88 registered yet. Always notify the event-loop once if enabling the
90 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
91 lp->status, not in the locally queued event list.
92 (linux_nat_stop): Don't mask out async event handling.
93 (linux_nat_setup_async): Delete.
94 (_initialize_linux_nat): Adjust.
95 (lin_thread_get_thread_signals): blocked_mask is global again.
98 2009-05-11 Pierre Muller <muller.u-strasbg.fr>
102 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
103 (target_stoppped_by_watchpoint): New macro.
104 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
105 (target_have_steppable_watchpoint): New macro.
106 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
107 (target_have_continuable_watchpoint): New macro.
108 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
109 (target_can_use_hardware_watchpoint): New macro.
110 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
111 (target_region_ok_for_hw_watchpoint): New macro.
113 * breakpoint.c (update_watchpoint): Use new macros.
114 (bpstat_alloc): Likewise.
115 (create_breakpoint): Likewise.
116 (watch_command_1): Likewise.
117 (can_use_hardware_watchpoint): Likewise.
118 (do_enable_breakpoint): Likewise.
119 * infrun.c (handle_inferior_event): Adapt to new macros.
120 * mips-tdep.c (mips_gdbarch_init): Update comments.
121 * procfs.c (procfs_set_watchpoint): Update comment.
122 (procfs_insert_watchpoint): Adapt to new macros.
123 * remote-m32r-sdi.c (m32r_stop):
124 * remote-mips.c (mips_remove_breakpoint):
125 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
126 (debug_to_stopped_by_watchpoint): Likewise.
129 2009-05-10 Pierre Muller <muller.u-strasbg.fr>
131 * src/gdb/target.h: Remove all tests for already defined
132 macros. All macros defined here should not be set in config
135 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
137 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
138 (have_ptrace_getsetfpregs): Likewise.
139 fetch_all_gp_regs): New function.
140 (fetch_gp_regs): New function.
141 (fetch_all_fp_regs): Likewise.
142 (fetch_fp_regs): New function.
143 (fetch_ppc_registers): Using the new methods to fetch general-
144 purpose and floating-pointer registers.
145 (store_all_gp_regs): New function.
146 (store_gp_regs): Likewise.
147 (store_all_fp_regs): New function.
148 (store_fp_regs): Likewise.
149 (store_ppc_registers): Using the new methods to store general-
150 purpose and floating-pointer registers.
152 2009-05-08 Doug Evans <dje@google.com>
154 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
156 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
158 * MAINTAINERS (Write After Approval): Add self.
160 2009-05-07 Joel Brobecker <brobecker@adacore.com>
162 * gdbarch.h (target_gdbarch): Add comment documenting this global.
164 2009-05-06 Joel Brobecker <brobecker@adacore.com>
166 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
168 * configure: Regenerate.
170 2009-05-06 Joel Brobecker <brobecker@adacore.com>
172 * utils.c: Add include of gdb_usleep.h.
173 (defaulted_query): Detect false EOF conditions that happen
174 on terminals opened with the O_NONBLOCK flag when there is
177 2009-05-06 Pedro Alves <pedro@codesourcery.com>
179 * inferior.c (add_inferior): Move observer_notify_new_inferior
181 (add_inferior_silent): ... here.
183 2009-05-06 Pierre Muller <muller.u-strasbg.fr>
184 Pedro Alves <pedro@codesourcery.com>
186 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
187 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
189 (procfs_stopped_by_watchpoint): Made static, ptid argument
191 (_initialize_procfs): Register new watchpoint related target
193 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
194 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
195 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
196 (target_insert_watchpoint, target_remove_watchpoint): Delete.
197 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
199 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
200 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
201 (target_insert_watchpoint, target_remove_watchpoint): Delete.
202 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
204 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
205 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
206 (target_insert_watchpoint, target_remove_watchpoint): Delete.
207 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
210 2009-05-06 Hui Zhu <teawater@gmail.com>
212 * i386-tdep.c (i386_process_record): Change bzero to memset.
214 2009-05-06 Hui Zhu <teawater@gmail.com>
216 * NEWS: Add item for process record and replay.
218 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
220 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
222 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
224 * inferior.h (read_pc, write_pc): Remove.
225 * regcache.c (read_pc, write_pc): Remove.
227 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
229 (handle_inferior_event): Use regcache_read_pc instead of read_pc
230 when determining value of stop_pc. Replace subsequent uses of
231 read_pc by inspecting already-retrieved stop_pc value.
232 (keep_going): Use regcache_read_pc instead of read_pc.
234 * breakpoint.c (watchpoint_check): Use current frame architecture
235 and PC instead of current_gdbarch and read_pc ().
236 * tracepoint.c (set_traceframe_context): Replace PC argument
238 (trace_start_command, finish_tfind_command): Update calls.
239 (finish_tfind_command): Compare frame IDs to identify transitions
241 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
242 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
243 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
244 of read_pc and write_pc.
245 (store_register): Make regcache argument non-const. Update call
246 to exec_one_dummy_insn.
248 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
249 * infcmd.c (post_create_inferior): Likewise.
250 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
251 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
252 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
253 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
254 * linux-fork.c (fork_load_infrun_state): Likewise.
255 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
256 * record.c (record_wait): Likewise.
257 * procfs.c (procfs_wait): Likewise.
258 * remote-mips.c (common_open, mips_wait): Likewise.
259 * remote-m32r-sdi.c (m32r_resume): Likewise.
261 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
262 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
263 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
264 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
265 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
267 * solib-darwin.c: Include "regcache.h".
268 * solib-pa64.c: Include "regcache.h".
269 * solib-svr4.c: Include "regcache.h.".
271 * symfile.c: Do not mention read_pc or write_pc in comments.
272 * dink32-rom.c: Likewise.
273 * m32r-rom.c: Likewise.
274 * mips-tdep.c: Likewise.
276 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
278 * fork-child.c (startup_inferior): Move setting stop_pc ...
279 * infcmd.c (post_create_inferior): ... to here.
281 2009-05-04 Michael Snyder <msnyder@vmware.com>
283 * NEWS: Add item for reverse debugging commands.
285 2009-05-04 Pedro Alves <pedro@codesourcery.com>
287 * go32-nat.c (go32_stop): Delete.
288 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
289 (go32_create_inferior): Don't call go32_stop or
291 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
293 (init_go32_ops): Don't register go32_stop.
295 2009-05-02 Eli Zaretskii <eliz@gnu.org>
297 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
300 * infcall.c (find_function_addr): Avoid compiler warnings for
303 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
305 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
306 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
308 2009-05-01 Doug Evans <dje@google.com>
310 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
313 2009-05-01 Eli Zaretskii <eliz@gnu.org>
315 * record.c (_initialize_record): Reformat and clarify doc strings
316 for stop-at-limit and insn-number-max.
318 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
320 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
322 Make specifiable the make_function_type type memory ownership.
323 * gdbtypes.c (make_function_type): New parameter `objfile', use it
324 explicitely instead of TYPE-initialized removed local variable
325 `objfile'. Describe `objfile' it in the function comment.
326 (lookup_function_type): Update make_function_type callers.
327 * gdbtypes.h (make_function_type): Update the prototype.
328 * jv-lang.c (java_link_class_type): Update make_function_type callers.
329 * dwarf2read.c (read_subroutine_type): Likewise.
330 * stabsread.c (read_type): Likewise.
332 2009-05-01 Eli Zaretskii <eliz@gnu.org>
334 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
335 printing a bogus "Thread <main>".
336 (go32_thread_alive): Don't return 1 for null_ptid.
338 * i386-tdep.c (i386_go32_init_abi): Override the number of
339 registers due to non-support of SSE.
341 2009-04-30 Anthony Green <green@moxielogic.com>
343 * configure.tgt: Link the moxie simulator in with gdb.
345 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
347 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
350 2009-04-30 Hui Zhu <teawater@gmail.com>
351 Michael Snyder <msnyder@vmware.com>
353 I386 Linux process record and replay support.
355 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
356 This struct has the argument for the function
357 "record_linux_system_call".
358 (i386_linux_intx80_sysenter_record): New function. Parse the
359 system call instruction and call function
360 "record_linux_system_call" to record execute log.
361 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
362 Set "i386_linux_intx80_sysenter_record" to
363 "i386_intx80_record" and "i386_sysenter_record".
365 2009-04-30 Hui Zhu <teawater@gmail.com>
366 Michael Snyder <msnyder@vmware.com>
368 I386 architecture process record and replay support.
370 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
371 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
373 (aflag, dflag, override, modrm, mod, reg, rm, ot,
374 i386_record_pc): New variables. Ditto.
375 (i386_record_modrm, i386_record_lea_modrm_addr,
376 i386_record_lea_modrm): New functions. Ditto.
377 (i386_process_record): New function. Parse the instruction in
378 address "addr" and record the values of registers and memory
379 that will be changed by this instruction.
380 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
381 "process_record" interface.
382 * i386-tdep.h (gdbarch_tdep): New function pointers
383 "i386_intx80_record" and "i386_sysenter_record" that point to
384 the function that can record "intx80" and "sysenter" execute
387 2009-04-30 Hui Zhu <teawater@gmail.com>
388 Michael Snyder <msnyder@vmware.com>
390 * infrun.c (use_displaced_stepping): Return false if process
391 record and replay target is used.
392 (proceed): Call function "record_not_record_set" if pocess
393 record and replay target is used.
395 2009-04-30 Hui Zhu <teawater@gmail.com>
396 Michael Snyder <msnyder@vmware.com>
398 Linux process record and replay support.
400 * Makefile.in (ALLDEPFILES): Add linux-record.c.
401 (ALL_TARGET_OBS): Add linux-record.o.
402 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
403 (i[34567]86-*-linux*): Add linux-record.o.
404 * linux-record.c, linux-record.h: New file.
406 2009-04-30 Hui Zhu <teawater@gmail.com>
407 Michael Snyder <msnyder@vmware.com>
409 Process record and replay target.
411 * Makefile.in (SFILES): Add record.c.
412 (COMMON_OBS): Add record.o.
413 * record.c, record.h: New file.
415 2009-04-30 Hui Zhu <teawater@gmail.com>
416 Michael Snyder <msnyder@vmware.com>
418 * target.h (strata): New stratum "record_stratum".
420 2009-04-30 Hui Zhu <teawater@gmail.com>
421 Michael Snyder <msnyder@vmware.com>
423 GDBARCH interface for process record and replay.
425 * gdbarch.sh (process_record): This interface point to the
426 function that records the inferior execute log.
428 2009-04-29 Doug Evans <dje@google.com>
430 * i386-nat.c (child_post_startup_inferior): Delete, unused.
432 2009-04-29 Pedro Alves <pedro@codesourcery.com>
434 * breakpoint.c (print_exception_catchpoint): Access `b' directly
435 instead of `b->loc->owner'.
436 (print_mention_exception_catchpoint): Ditto.
438 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
440 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
442 2009-04-27 Tom Tromey <tromey@redhat.com>
444 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
446 2009-04-27 Jerome Guitton <guitton@adacore.com>
448 * symtab.c (append_exact_match_to_sals): New function, extracted
449 from expand_line_sal.
450 (expand_line_sal): Use append_exact_match_to_sals to append exact
451 matches. If none found, append all best items.
453 2009-04-27 Jerome Guitton <guitton@adacore.com>
455 * main.c (captured_main): Move gdbinit lookups after gdb_init.
457 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
460 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
461 (read_func_scope): Call inherit_abstract_dies.
463 2009-04-25 Eli Zaretskii <eliz@gnu.org>
465 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
466 sparc-sol2-nat.c and sparc-sol2-tdep.c.
468 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
470 2009-04-24 Pierre Muller <muller.u-strasbg.fr>
472 ARI change: Use "/* ARI: rule */" pattern.
473 * utils.c: Update ARI patterns.
474 * gdb_dirent.h: Likewise.
476 2009-04-23 Anthony Green <green@moxielogic.com>
478 * MAINTAINERS: Add moxie target.
479 * configure.tgt: Add moxie-*-elf target.
480 * moxie-tdep.c: New file.
481 * moxie-tdep.h: New file.
483 2009-04-23 Joel Brobecker <brobecker@adacore.com>
485 * ada-lang.c: Remove an extra empty line. No code change.
487 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
489 Fix double free on error inserting the breakpoint instruction.
490 * breakpoint.c (create_breakpoints): Move the
491 update_global_location_list call to ...
492 (break_command_really): ... here together with the second local call
493 both unified after all the cleanups.
495 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
496 Tom Tromey <tromey@redhat.com>
498 * configure, config.in: Regenerate.
499 * configure.ac: Support for relocatable GDB datadir. Use
500 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
501 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
502 * top.c (init_main): Add "set data-directory".
503 * defs.h (gdb_datadir): Declare.
504 * main.c (gdb_datadir): New global.
505 (captured_main): Initialize gdb_datadir. Use relocate_directory.
506 (relocate_path): New function.
507 (relocate_directory): Likewise.
508 (get_init_files): Use relocate_path.
509 (README): Mention --with-gdb-datadir.
511 2009-04-23 Joel Brobecker <brobecker@adacore.com>
513 * ada-tasks (task_command_1): Call target_find_new_threads.
515 2009-04-23 Joel Brobecker <brobecker@adacore.com>
517 * stack.c (do_gdb_disassembly): Print the exception message if an
518 error was thrown while trying to perform the disassembly.
520 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
522 * varobj.c (free_variable): Replace free_current_contents by xfree.
524 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
526 * arm-linux-nat.c (fetch_register, store_register): Use
527 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
528 * arm-linux-tdep.c (arm_linux_supply_gregset,
529 arm_linux_collect_gregset): Likewise.
530 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
531 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
533 2009-04-22 Hui Zhu <teawater@gmail.com>
535 * stack.c (_initialize_stack): Set the default of
536 disassemble-next-line to off.
538 2009-04-21 Tom Tromey <tromey@redhat.com>
540 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
541 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
543 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
545 * configure.ac: Add quotes to not lose brackets in help text.
546 * configure: Rebuild.
548 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
550 * configure.ac: Don't postprocess Makefile in config.status.
551 Substitute GDB_NM_FILE. Don't substitute nm_h.
552 * Makefile.in (GDB_NM_FILE): Substitute.
553 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
554 * configure: Regenerate.
555 * gnulib/Makefile.in: Regenerate.
557 2009-04-21 Joseph Myers <joseph@codesourcery.com>
559 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
560 --with-htmldir): New.
561 * configure: Regenerate.
563 2009-04-21 Tom Tromey <tromey@redhat.com>
565 * configure: Rebuild.
566 * configure.ac: Use lower case for start of help strings. Clean
567 up --with-sysroot help.
569 2009-04-21 Tom Tromey <tromey@redhat.com>
571 * configure: Rebuild.
572 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
573 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
576 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
578 ARI fix: remove "%p".
579 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
580 (ia64_sigtramp_frame_this_id): Ditto.
581 (ia64_libunwind_frame_this_id): Ditto.
582 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
583 * symmisc.c (maintenance_info_psymtabs): Ditto.
585 2009-04-21 Joseph Myers <joseph@codesourcery.com>
587 * configure.ac (--with-relocated-sources): New.
588 * configure, config.in: Regenerate.
589 * source.c (add_substitute_path_rule): Remove static.
590 * source.h (add_substitute_path_rule): Declare.
591 * main.c: Include "source.h".
592 (captured_main): Add substitution rule if RELOC_SRCDIR.
594 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
596 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
598 2009-04-20 David Daney <ddaney@caviumnetworks.com>
600 * NEWS: Mention MIPS/Linux hardware watchpoint support.
602 2009-04-20 David Daney <ddaney@caviumnetworks.com>
604 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
605 (maint_show_dr, super_close): New variables.
606 (super_fetch_registers, super_store_registers): Make static.
607 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
608 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
609 (pt_watch_style): Define new enum.
610 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
612 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
614 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
615 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
616 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
617 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
618 (type_to_irw, fill_mask, try_one_watch)
619 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
620 (mips_linux_new_thread, populate_regs_from_watches)
621 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
622 (mips_linux_close): New functions.
623 (_initialize_mips_linux_nat): Register watchpoint functions with
624 the target_ops. Add show-debug-regs maintenance command.
626 2009-04-20 David Daney <ddaney@caviumnetworks.com>
628 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
630 2009-04-19 Pedro Alves <pedro@codesourcery.com>
632 * NEWS: Mention gdbserver support for x86 Windows CE.
634 2009-04-19 Eli Zaretskii <eliz@gnu.org>
636 * config/djgpp/fnchange.lst: Fix typos.
638 Set default host and target charsets in the DJGPP port.
640 * config/djgpp/config.sed (am_cv_langinfo_codeset)
641 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
642 in all configure scripts that define ac_cv_env_CPP_value.
644 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
647 * config/djgpp/nl_types.h: New file.
649 * config/djgpp/langinfo.h: New file.
651 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
653 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
655 * Makefile.in (MAKEHTML): Set to makeinfo --html.
656 (MAKEHTMLFLAGS): Set to empty.
658 2009-04-18 Eli Zaretskii <eliz@gnu.org>
660 * NEWS: Mention all new set/show commands added since GDB 6.8 was
663 * go32-nat.c (go32_sysinfo): Check if the call to
664 __dpmi_get_capabilities fills the buffer with information, and
665 don't use the buffer if not.
667 2009-04-17 Tom Tromey <tromey@redhat.com>
669 * charset.c (_initialize_charset): Add special case for "646".
671 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
673 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
674 * configure: Regenerate.
675 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
676 configure substitutions.
677 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
679 2009-04-17 Pierre Muller <muller.u-strasbg.fr>
681 ARI fix: Do not use %p, replace by call to host_address_to_string
683 * darwin-nat.c (darwin_xfer_partial): Apply change.
684 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
685 * gnu-nat.h (proc_debug): Ditto.
686 * symmisc.c (maintenance_info_symtabs): Ditto.
687 (maintenance_info_psymtabs): Ditto.
688 * windows-nat.c (handle_load_dll): Ditto.
689 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
690 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
692 2009-04-17 Joseph Myers <joseph@codesourcery.com>
694 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
696 (sparc-*-linux*): Likewise.
698 2009-04-17 Eli Zaretskii <eliz@gnu.org>
700 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
703 2009-04-16 Pedro Alves <pedro@codesourcery.com>
705 * remote.c (remote_query_attached): Fix pasto in packet_ok result
708 2009-04-16 Joel Brobecker <brobecker@adacore.com>
710 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
711 Revert the previous change. Might not be correct, actually.
713 2009-04-16 Joel Brobecker <brobecker@adacore.com>
715 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
716 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
717 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
718 Remove declaration. These are non-existent functions.
720 2009-04-16 Joel Brobecker <brobecker@adacore.com>
722 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
723 Fix a compilation warning on mips-irix due to casting from
724 a pointer of different size.
726 2009-04-16 Joel Brobecker <brobecker@adacore.com>
728 * ada-lang.c (symtab_for_sym): Delete.
729 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
731 2009-04-16 Joel Brobecker <brobecker@adacore.com>
733 * ada-lang.c (extract_string): Delete.
734 (ada_main_name): Reimplement using target_read_string instead of
737 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
739 * m68klinux-nat.c: Remove obsolete comment.
740 (fetch_register, store_register): Don't call
741 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
742 which are always nops here.
744 2009-04-14 Tom Tromey <tromey@redhat.com>
746 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
747 (c_printstr): Likewise.
748 * charset.c: Include gdb_wait.h.
749 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
750 (find_charset_names): Use pexecute. Handle libiconv's output.
752 (_initialize_charset): Use xstrdup.
753 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
755 (INTERMEDIATE_ENCODING): New define.
756 * configure, config.in: Rebuild.
757 * configure.ac: Check for btowc.
759 2009-04-15 Tom Tromey <tromey@redhat.com>
761 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
763 2009-04-15 Eli Zaretskii <eliz@gnu.org>
765 * utils.c (parse_escape): Initialize target_char to pacify GCC.
767 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
769 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
771 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
773 ARI fix: sprintf rule.
774 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
775 * ada-lang.c (add_angle_brackets): Use xstrprintf.
776 (ada_decode): Replace sprintf by xsnprintf.
777 (find_old_style_renaming_symbol): Ditto.
778 (ada_to_fixed_type_1, ada_enum_name): Ditto.
781 2009-04-14 Joel Brobecker <brobecker@adacore.com>
783 * target.c (target_mourn_inferior): Call bfd_cache_close_all
784 after having executed the target mourn_inferior routine.
786 2009-04-14 Eli Zaretskii <eliz@gnu.org>
788 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
791 2009-04-13 David Daney <ddaney@caviumnetworks.com>
793 * infrun.c (maybe_software_singlestep): New function.
794 (resume): Call maybe_software_singlestep.
795 (handle_inferior_event): Same.
797 2009-04-13 Tom Tromey <tromey@redhat.com>
799 * python/python-frame.c (frapy_richcompare): Return
800 Py_NotImplemented, not an error. Handle Py_NE as well.
802 2009-04-13 Eli Zaretskii <eliz@gnu.org>
804 * charset.c (EILSEQ): Define if not defined by system headers.
806 2009-04-11 Eli Zaretskii <eliz@gnu.org>
808 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
809 to be consistent with renaming config.intl.in into config_intl.in.
811 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
812 consistent with the change from 2008-11-09.
814 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
816 * gdbtypes.c: Remove excessive parentheses at the return keywords.
817 * varobj.c (varobj_invalidate): Fix indentation.
818 * varobj.c (varobj_invalidate): Fix formatting text width.
820 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
822 Implement -exec-jump.
824 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
825 * mi/mi-main.c (mi_cmd_exec_jump): New.
826 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
828 2009-04-07 Doug Evans <dje@google.com>
830 * symfile.c (symbol_file_clear): Fix indentation.
832 2009-04-06 Mark Kettenis <kettenis@gnu.org>
834 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
836 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
838 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
839 (ppc_linux_auxv_parse): New function.
840 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
841 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
843 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
845 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
846 BFD to contents of SPU name note.
847 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
848 with "from_tty" argument 1 instead of 0.
850 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
853 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
854 Create the symbol in local scope.
855 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
857 2009-04-02 Keith Seitz <keiths@redhat.com>
859 * stabsread.c (read_member_functions): GCC may emit an extra space
860 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
861 whitespace when looking for these functions.
863 2009-04-01 Joel Brobecker <brobecker@adacore.com>
865 Change the default value for "set print frame-arguments" to scalars.
867 * stack.c (print_frame_arguments): Set initial value to "scalars".
869 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
871 * mips-tdep.c (mips_numeric_register_alieses): New definition.
872 (mips_gdbarch_init): Add user registers from
873 mips_numeric_register_aliases.
875 2009-04-01 Joel Brobecker <brobecker@adacore.com>
877 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
879 2009-04-01 Joel Brobecker <brobecker@adacore.com>
881 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
882 this is the last one.
884 2009-04-01 Pedro Alves <pedro@codesourcery.com>
886 * remote.c (append_resumption): New.
887 (remote_vcont_resume): Use it.
889 2009-04-01 Joel Brobecker <brobecker@adacore.com>
891 * windows-nat.c (+windows_get_ada_task_ptid): New function.
892 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
894 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
895 Keith Seitz <keiths@redhat.com>
896 Jan Kratochvil <jan.kratochvil@redhat.com>
899 * Makefile.in (dbxread.o): Update.
900 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
901 * dwarf2read.c (GDB_FORM_cached_string): New.
902 (read_partial_die): Use dwarf2_canonicalize_name.
903 (dwarf2_linkage_name): Use dwarf2_name.
904 (dwarf2_canonicalize_name): New.
905 (dwarf2_name): Use dwarf2_canonicalize_name.
906 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
907 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
908 * symtab.c (lookup_symbol_in_language): Canonicalize input before
910 * cp-name-parser.y: operator() requires two parameters,
911 according to libiberty.
912 * minsyms.c (lookup_minimal_symbol): Canonicalize input
916 2009-03-31 Joel Brobecker <brobecker@adacore.com>
918 Provide support for (Ada) task-specific breakpoints.
920 * ada-lang.h (ada_get_task_number): Add declaration.
921 (breakpoint_ada_task_match): Delete declaration.
922 * ada-tasks.c (ada_get_task_number): Make non-static.
923 * breakpoint.h (struct breakpoint): Add field "task".
924 * breakpoint.c (print_one_breakpoint_location): Add handling of
925 task-specific breakpoints.
926 (create_breakpoint, create_breakpoints, find_condition_and_thread):
927 New parameter "task".
928 (break_command_really): Update calls to find_condition_and_thread
929 and create_breakpoints.
930 (breakpoint_re_set_one): Update call to find_condition_and_thread.
933 2009-03-31 Joel Brobecker <brobecker@adacore.com>
935 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
937 2009-03-31 Pedro Alves <pedro@codesourcery.com>
939 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
940 if the thread's ptid without a thread id field is in the list
941 before calling thread_change_ptid.
942 (extended_remote_attach_1): In non-stop mode, do not rely on
943 querying the current thread, instead, query the thread list, and
944 select the first thread of the process.
945 * gdbthread.h (first_thread_of_process): Declare.
946 * thread.c (first_thread_of_process): Define.
948 2009-03-30 Stan Shebs <stan@codesourcery.com>
950 Make tracepoints into a type of breakpoint.
951 * breakpoint.h (enum bptype): Add bp_tracepoint.
952 (struct breakpoint): Add fields step_count, pass_count, actions.
953 (get_tracepoint, get_tracepoint_by_number): Declare.
954 (all_tracepoints): Declare.
955 * breakpoint.c: Include tracepoint.h, readline.h.
956 (ALL_TRACEPOINTS): Move here from tracepoint.c.
957 (tracepoint_count): Ditto.
958 (should_be_inserted): GDB does not insert tracepoints itself.
959 (print_it_typical): Add tracepoint case.
960 (bpstat_what): Ditto.
961 (print_one_breakpoint_location): Ditto, and add printing for
962 pass count, step count, and action list.
963 (user_settable_breakpoint): Add tracepoint case.
964 (allocate_bp_location): Ditto.
965 (set_breakpoint_location_function): Ditto.
966 (disable_breakpoints_in_shlibs): Ditto.
968 (break_command_really): Add argument traceflag, use to choose
969 basic breakpoint type.
970 (break_command_1): Pass extra argument.
971 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
972 (breakpoint_re_set_one): Add tracepoint case.
973 (disable_command, enable_command): Ditto.
974 (set_tracepoint_count): Move here from tracepoint.c.
975 (trace_command): Move here from tracepoint.c and use
976 break_command_really.
977 (tracepoints_info): Move here from tracepoint.c and call
979 (enable_trace_command): Move here from tracepoint.c and call
981 (disable_trace_command): Move here from tracepoint.c and call
983 (delete_trace_command): Move here from tracepoint.c and call
985 (trace_pass_command): Move here from tracepoint.c.
986 (get_tracepoint_by_number): Ditto.
987 (tracepoint_save_command): Ditto.
988 (get_tracepoint): New function.
989 (all_tracepoints): New function.
990 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
991 deprecate "enable trace" and "disable trace" commands.
992 * tracepoint.h (struct tracepoint): Remove.
993 (tracepoint_chain): Remove decl.
994 (deprecated_create_tracepoint_hook): Remove decl.
995 (deprecated_delete_tracepoint_hook): Remove decl.
996 (deprecated_modify_tracepoint_hook): Remove decl.
997 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
998 (free_actions): Update signature.
999 (validate_actionline): Update signature.
1000 (end_actions_pseudocommand): Declare.
1001 (while_stepping_pseudocommand): Declare.
1002 * tracepoint.c: Include breakpoint.h.
1003 (tracepoint_chain, tracepoint_count): Remove.
1004 (free_actions, make_cleanup_free_actions): Update signature.
1005 (trace_command, set_raw_tracepoint): Remove.
1006 (trace_mention): Remove.
1007 (tracepoints_info): Remove.
1008 (tracepoint_operation, map_args_over_tracepoints): Remove.
1009 (get_tracepoint_by_number): Remove.
1010 (enable_trace_command, disable_trace_command): Remove.
1011 (delete_trace_command, trace_pass_command): Remove.
1012 (trace_actions_command, read_actions): Update signature.
1013 (validate_actionline): Update signature, use bp loc.
1014 (encode_actions): Ditto.
1015 (download_tracepoint): New function, body of trace_start_command.
1016 (trace_start_command): Call it, use all_tracepoints.
1017 (tracepoint_save_command): Remove.
1018 (tracepoint_dump_command): Use get_tracepoint.
1019 (end_actions_pseudocommand): Make globally visible.
1020 (while_stepping_pseudocommand): Ditto.
1021 (_initialize_tracepoint): Move command definitions to breakpoint.c.
1023 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
1025 Expose frames to Python.
1026 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
1027 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
1028 (python-frame.o): New target.
1029 * python/python-frame.c: New file.
1030 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
1031 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
1032 gdbpy_initialize_frames): New prototypes.
1033 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
1034 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
1036 * stack.c (find_frame_funname): New function, factored out of
1038 (print_frame): Call find_frame_funname.
1039 * stack.h (find_frame_funname): Add prototype.
1041 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1043 Remove unused value_object attribute `owned_by_gdb'.
1044 * python/python-value.c (value_object): Remove owned_by_gdb
1046 (valpy_dealloc): Remove reference to self->owned_by_gdb.
1047 (valpy_new): Likewise.
1048 (value_to_value_object): Likewise.
1050 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1052 Change gdb.Value.address from a method to an attribute.
1053 * python/python-value.c (value_object): Add `address' element.
1054 (valpy_dealloc): Decrement reference to self->address if set.
1055 (valpy_new): Initialize val_obj->address.
1056 (valpy_address): Rename to ...
1057 (valpy_get_address): ... this. Change signature from method to
1058 attribute. Update self->address if not set.
1059 (value_to_value_object): Initialize val_obj->address.
1060 (value_object_getset): Add `address' element.
1061 (value_object_methods): Remove `address' element.
1063 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
1065 * observer.sh: Set LANG/LC_ALL to C, not c.
1067 2009-03-28 Kevin Buettner <kevinb@redhat.com>
1069 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
1072 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1074 * remote.c (remote_stop_ns): If multi-process extensions are off,
1075 and GDB is requesting the whole process to stop, sent "vCont;t",
1078 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1080 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
1083 2009-03-27 Eli Zaretskii <eliz@gnu.org>
1085 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
1087 2009-03-26 Doug Evans <dje@google.com>
1089 * thread.c (do_restore_current_thread_cleanup): Redo test for
1090 whether to restore old->inferior_ptid.
1092 2009-03-26 Tom Tromey <tromey@redhat.com>
1094 * breakpoint.c (resolve_sal_pc): Preserve original line number
1095 when skipping prologue.
1097 2009-03-26 Doug Evans <dje@google.com>
1099 * thread.c (inferior_thread) Remove "extern" in definition.
1101 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
1103 Add gdb.Value.is_optimized_out attribute.
1104 * python/python-value.c (valpy_get_is_optimized_out): New
1106 (value_object_getset): New variable.
1107 (value_object_type): Initialize tp_getset element.
1109 2009-03-26 Joel Brobecker <brobecker@adacore.com>
1111 Recognize missing DW_AT_location as <value optimized out>.
1113 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
1114 Call add_symbol_to_list.
1116 2009-03-25 Tom Tromey <tromey@redhat.com>
1118 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
1119 * stack.c (print_this_frame_argument_p): Use check_typedef.
1121 2009-03-25 Tom Tromey <tromey@redhat.com>
1123 * configure: Rebuild.
1124 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
1125 Rearrange flags setting. Add comments.
1127 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1129 * config/i386/nm-i386.h: Remove code within
1130 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
1131 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
1133 * config/i386/nm-cygwin64.h: Ditto.
1134 * config/i386/nm-fbsd.h: Ditto.
1135 * config/i386/nm-go32.h: Ditto.
1136 * config/i386/nm-linux.h: Ditto.
1137 * config/i386/nm-linux64.h: Ditto.
1139 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1141 ARI fix: "xasprintf" rule.
1142 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
1144 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1146 * remote.c (remote_start_remote): In non-stop mode, call
1147 init_wait_for_inferior before adding threads and inferiors.
1149 2009-03-25 Joel Brobecker <brobecker@adacore.com>
1151 * breakpoint.c (breakpoint_thread_match): Split a large condition
1152 into several smaller conditions. No behavior change.
1154 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1156 * infrun.c (infrun_thread_thread_exit): New.
1157 (_initialize_infrun): Attach it to the thread_exit observer.
1158 * thread.c (delete_thread_1): Always call the observer, passing it
1160 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
1161 SILENT, return immediately.
1163 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1165 * infrun.c (normal_stop): Use has_stack_frames instead of
1167 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
1168 when there is no thread selected.
1169 (mi_cmd_execute): Don't special case commands that can run without
1170 a valid selected thread.
1171 * top.c (execute_command): Don't special case commands that can
1172 run without a valid selected thread. Use has_stack_frames.
1173 * infcmd.c (ensure_valid_thread): New.
1174 (continue_1, step_1, jump_command, signal_command): Use it.
1175 (detach_command): Error out if there's no selected thread/inferior.
1176 * thread.c (print_thread_info): Allow having no thread selected.
1177 (switch_to_thread): Don't read the PC if there is no current thread.
1178 (do_restore_current_thread_cleanup): Don't record the current
1179 frame if there is no current thread.
1180 (make_cleanup_restore_current_thread): Don't read frame info if
1181 there is no selected thread.
1182 (_initialize_thread): Don't mark commands as
1183 "no_selected_thread_ok".
1184 * frame.c (get_current_frame): Error out if there is no valid
1186 (has_stack_frames): Return false if there is no valid
1188 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
1189 "no_selected_thread_ok".
1190 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
1191 (get_cmd_no_selected_thread_ok): Delete.
1192 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
1193 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
1195 * stack.c (get_selected_block): Use has_stack_frames.
1197 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
1199 Fix size of FPSCR in Power 7 processors.
1200 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
1201 (PPC_FEATURE_HAS_DFP): New #define.
1202 (ppc_linux_read_description): Check for DFP feature instead of
1203 ISA 2.05 to decide on size of the FPSCR.
1205 2009-03-25 Kevin Buettner <kevinb@redhat.com>
1207 * mn10300-tdep.c (trad-frame.h): Don't include.
1208 (prologue-value.h): Include.
1209 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
1210 (struct mn10300_prologue): Define.
1211 (push_reg, translate_rreg, check_for_saved): New functions.
1212 (mn10300_analyze_prologue): Rewrite, using prologue-value
1213 machinery. Handle more instructions than before. Permit
1214 instructions to occur in any order.
1215 (mn10300_skip_prologue): Find the extents of the function
1216 in question; mn10300_analyze_prologue no longer does this.
1217 (mn10300_analyze_frame_prologue): New function.
1218 (mn10300_frame_base): New function.
1219 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
1221 (mn10300_frame_prev_register): Likewise.
1222 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
1223 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
1225 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
1227 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1229 Fix completer problem for filename completion on the first try.
1231 * gdb/completer.h (gdb_completion_word_break_characters): New function.
1232 * gdb/completer.c: Include gdb_assert.h.
1233 (complete_line_internal_reason): New enum.
1234 (complete_line_internal): Change last argument type to
1235 complete_line_internal_reason.
1236 Modify function to handle the different complete_line_internal_reason
1238 (complete_line): Adapt to change in complete_line_internal.
1239 (command_completer): Ditto.
1240 (gdb_completion_word_break_characters): Implement new function.
1241 * top.c (init_main): Set rl_completion_word_break_hook to
1242 gdb_completion_word_break_characters.
1245 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1247 ARI fix: "strlen d_name" rule.
1248 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
1251 2009-03-24 Tom Tromey <tromey@redhat.com>
1252 Pedro Alves <pedro@codesourcery.com>
1254 * configure, config.in: Rebuild.
1255 * configure.ac: Check for libiconvlist.
1256 * charset.c: Check HAVE_LIBICONVLIST.
1257 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
1258 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
1259 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
1261 (INTERNAL_CFLAGS_BASE): Update.
1262 (INTERNAL_LDFLAGS): Update.
1265 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1267 * configure.ac: Initialize the variable $PREFER_CURSES.
1268 * configure: Regenerated.
1270 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1272 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
1273 * configure: Regenerated.
1275 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
1277 ARI fix: "strerror" rule.
1278 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
1279 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
1281 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1283 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
1284 before looking up the fields inside our struct type.
1286 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1288 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
1289 trying to resolve the type qualification.
1291 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1293 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
1294 we try to apply the attribute on the real type, rather than
1295 its associated typedef.
1297 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1299 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
1300 to make sure we try to get the modulus of the actual type, not the
1303 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1305 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
1306 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
1307 to get the real type, not the associated typedef.
1309 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1311 * ada-lang.c (ada_get_field_index): Add handling of the case
1312 when TYPE is a typedef of a struct.
1314 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1316 Add gdb_usleep as a portable version of usleep based on gdb_select.
1317 * gdb_usleep.h, gdb_usleep.c: New files.
1318 * Makefile.in (SFILES): Add gdb_usleep.c.
1319 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
1320 (COMMON_OBS): Add gdb_usleep.o.
1321 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
1322 by call to gdb_usleep.
1324 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1326 * buildsym.c (end_symtab): If we ignore the subfiles, then
1327 unlink the associated symtabs if they were already allocated.
1329 2009-03-23 Jerome Guitton <guitton@adacore.com>
1331 Provide a way to force building of GDB with libcurses.
1332 * configure.ac: Add --with-curses.
1333 * configure: Regenerated.
1335 2009-03-23 Tom Tromey <tromey@redhat.com>
1337 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
1340 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
1342 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
1343 solib_contains_address_p instead of searching.
1345 2009-03-23 Tom Tromey <tromey@redhat.com>
1347 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
1348 (iconv): Make 'inbuf' argument const.
1349 (convert_between_encodings): Use ICONV_CONST.
1350 (wchar_iterate): Likewise.
1352 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1354 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
1355 dynamically loaded function.
1356 (LookupPrivilegeValueA): Ditto.
1357 (OpenProcessToken): Ditto.
1358 (AdjustTokenPrivileges): Rename and define placeholder for address of
1359 dynamically loaded function.
1360 (LookupPrivilegeValueA): Ditto.
1361 (OpenProcessToken): Ditto.
1362 (set_process_privilege): Remove check for loaded functions.
1363 (bad_OpenProcessToken): Define.
1364 (_initialize_loadable): Load token functions from advapi here, setting
1365 OpenProcessToken function to a dummy static function which always return
1366 error if OS doesn't support this functionality.
1368 2009-03-22 Nicolas Roche <roche@adacore.com>
1369 Christopher Faylor <me+cygwin@cgf.cx>
1371 * win32-nat.c (ctrl_c_handler): New function.
1372 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
1373 is run in a separate console.
1375 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1377 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
1378 for dynamically loaded function.
1379 (DebugBreakProcess): Ditto.
1380 (DebugSetProcessKillOnExit): Ditto.
1381 (EnumProcessModules): Ditto.
1382 (GetModuleFileNameExA): Ditto.
1383 (GetModuleInformation): Ditto.
1384 (DebugActiveProcessStop): Rename and define placeholder for address of
1385 dynamically loaded function.
1386 (DebugBreakProcess): Ditto.
1387 (DebugSetProcessKillOnExit): Ditto.
1388 (EnumProcessModules): Ditto.
1389 (GetModuleFileNameExA): Ditto.
1390 (GetModuleInformation): Ditto.
1391 (psapi_loaded): Delete.
1392 (get_module_name): Don't check psapi_loaded, just rely on the fact that
1393 dynamically loaded functions will return failure if they weren't
1395 (has_detach_ability): Delete.
1396 (windows_attach): Remove call to has_detach_ability (). Just rely on
1397 functions being callable.
1398 (bad_DebugActiveProcessStop): Define.
1399 (bad_DebugBreakProcess): Ditto.
1400 (bad_DebugSetProcessKillOnExit): Ditto.
1401 (bad_EnumProcessModules): Ditto.
1402 (bad_GetModuleFileNameExA): Ditto.
1403 (bad_GetModuleInformation): Ditto.
1404 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
1405 dynamic storage here, setting nonexistent functions to dummy static
1406 functions which always return error.
1408 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1410 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
1411 to the about_to_proceed observer notification.
1412 (mi_about_to_proceed): New.
1413 (mi_on_resume): Only output ^running and the prompt here if the
1414 target was proceeded.
1415 * breakpoint.c (breakpoint_proceeded): New static.
1416 (breakpoint_about_to_proceed): New.
1417 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
1418 the about_to_proceed observer notification.
1419 * inferior.h (breakpoint_proceeded): Delete declaration.
1420 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
1421 Notify the about_to_proceed observers.
1422 (struct inferior_status): Delete breakpoint_proceeded member.
1423 (save_inferior_status): Don't save it.
1424 (restore_inferior_status): Don't restore it.
1425 * mi-main.h (mi_proceeded): Declare.
1426 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
1429 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1431 * gdbthread.h (struct thread_info): Add in_infcall member.
1432 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
1433 Remove reverences to suppress_resume_observer. Refresh
1434 `call_thread' after returning from `proceed'.
1435 * infcmd.c (suppress_resume_observer): Delete.
1436 * inferior.h (suppress_resume_observer): Delete declaration.
1437 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
1439 * thread.c (set_running): Remove references to
1440 suppress_resume_observer.
1441 * infrun.c (struct inferior_status): Add in_infcall member.
1442 (save_inferior_status): Save it.
1443 (restore_inferior_status): Restore it.
1445 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1447 * infcall.c (run_inferior_call): Remove references to
1448 suppress_stop_observer.
1449 * infcmd.c (suppress_stop_observer): Delete.
1450 (finish_command_continuation): Remove NOTE. Don't clear
1451 suppress_stop_observer anymore.
1452 (finish_command_continuation_free_arg): Likewise.
1453 (finish_forward): Remove references to suppress_stop_observer.
1454 Call normal_stop observer if we haven't already.
1455 * inferior.h (suppress_stop_observer): Delete.
1456 * infrun.c (normal_stop): When deciding to suppress the
1457 normal_stop observer, check for proceed_to_finish instead of
1458 suppress_stop_observer.
1460 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1462 * symfile.c (symfile_relocate_debug_section): Remove check for
1465 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1466 Jim Blandy <jimb@red-bean.com>
1467 Thiago Jung Bauermann <bauerman@br.ibm.com>
1468 Tom Tromey <tromey@redhat.com>
1470 Miscellaneous fixes to the Python code.
1471 * python/python-cmd.c (cmdpy_init): Accept keyword
1473 * python/python-value.c (valpy_string): Accept keyword
1475 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
1476 Do not call value_to_value_object on NULL RES_VAL.
1477 (value_object_methods): Change `string' entry to also accept
1479 (convert_value_from_python): Return a copy of the value if obj is
1481 (value_object_methods): Mark the `string' method as accepting
1482 keywords, and show method "prototype" in the doc string.
1483 * python/python.c (get_parameter): Don't return inside a
1486 2009-03-20 Tom Tromey <tromey@redhat.com>
1488 Add support for convenience functions in Python.
1489 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
1490 (SUBDIR_PYTHON_SRCS): Add python-function.c.
1491 (python-function.o): New target.
1492 * eval.c: Include "python/python.h" and <ctype.h>.
1493 (evaluate_subexp_standard): Handle values of type
1494 TYPE_CODE_INTERNAL_FUNCTION.
1495 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
1496 * parse.c (write_exp_string): Remove duplicate word in comment.
1497 * python/python-function.c: New file.
1498 * python/python-internal.h (gdbpy_initialize_functions): Add
1500 * python/python.c (_initialize_python): Call
1501 gdbpy_initialize_functions.
1502 * valprint.c (value_check_printable): Handle values of type
1503 TYPE_CODE_INTERNAL_FUNCTION.
1504 * value.c: Include "cli/cli-decode.h".
1505 (internal_function): New struct.
1506 (functionlist, internal_fn_type): New static variables.
1507 (lookup_only_internalvar,
1508 lookup_internalvar): Add const qualifier to name argument.
1509 (create_internalvar): Likewise. Initialize new field.
1510 (set_internal_var): Fix typo in comment. Don't allow assignment
1511 to canonical variable.
1512 (value_create_internal_function, value_internal_function_name,
1513 call_internal_function, function_command, function_destroyer,
1514 add_internal_function): New functions.
1515 (_initialize_values): Create `function' placeholder command.
1516 Initialize internal_fn_type.
1517 * value.h (lookup_only_internalvar, create_internalvar,
1518 lookup_internalvar): Add const qualifier to name argument.
1519 (internal_function_fn, add_internal_function, call_internal_function,
1520 value_internal_function_name): Add prototypes.
1521 (struct internalvar) <canonical>: New field.
1523 2009-03-20 Tom Tromey <tromey@redhat.com>
1525 * c-lang.c (evaluate_subexp_c): Call check_typedef.
1527 2009-03-20 Tom Tromey <tromey@redhat.com>
1528 Julian Brown <julian@codesourcery.com>
1530 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
1531 PR i18n/9401, PR exp/9613:
1533 * value.h (value_typed_string): Declare.
1534 (val_print_string): Update.
1535 * valprint.h (print_char_chars): Update.
1536 * valprint.c (print_char_chars): Add type argument. Update.
1537 (val_print_string): Likewise.
1538 * valops.c (value_typed_string): New function.
1539 * utils.c (host_char_to_target): New function.
1540 (parse_escape): Use host_char_to_target, host_hex_value. Update.
1542 (no_control_char_error): Remove.
1543 * typeprint.c (print_type_scalar): Update.
1544 * scm-valprint.c (scm_scmval_print): Update.
1545 * scm-lang.h (scm_printchar, scm_printstr): Update.
1546 * scm-lang.c (scm_printchar): Add type argument.
1547 (scm_printstr): Likewise.
1548 * printcmd.c (print_formatted): Update.
1549 (print_scalar_formatted): Update.
1550 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
1551 Handle '%lc' and '%ls'.
1552 * parser-defs.h (struct typed_stoken): New type.
1553 (struct stoken_vector): Likewise.
1554 (write_exp_string_vector): Declare.
1555 * parse.c (write_exp_string_vector): New function.
1556 * p-valprint.c (pascal_val_print): Update.
1557 * p-lang.h (is_pascal_string_type, pascal_printchar,
1558 pascal_printstr): Update.
1559 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
1560 Add 'char_type' argument.
1561 (pascal_emit_char): Add type argument.
1562 (pascal_printchar): Likewise.
1563 (pascal_printstr): Likewise.
1564 * objc-lang.c (objc_emit_char): Add type argument.
1565 (objc_printchar): Likewise.
1566 (objc_printstr): Likewise.
1567 * macroexp.c (get_character_constant): Handle unicode characters.
1569 (get_string_literal): Handle unicode strings. Use
1571 * m2-valprint.c (print_unpacked_pointer): Update.
1572 (m2_print_array_contents): Update.
1573 (m2_val_print): Update.
1574 * m2-lang.c (m2_emit_char): Add type argument.
1575 (m2_printchar): Likewise.
1576 (m2_printstr): Likewise.
1577 * language.h (struct language_defn) <la_printchar>: Add type
1579 <la_printstr, la_emitchar>: Likewise.
1580 (LA_PRINT_CHAR): Likewise.
1581 (LA_PRINT_STRING): Likewise.
1582 (LA_EMIT_CHAR): Likewise.
1583 * language.c (unk_lang_emit_char): Add type argument.
1584 (unk_lang_printchar): Likewise.
1585 (unk_lang_printstr): Likewise.
1586 * jv-valprint.c (java_val_print): Update.
1587 * jv-lang.c (java_emit_char): Add type argument.
1588 * f-valprint.c (f_val_print): Update.
1589 * f-lang.c (f_emit_char): Add type argument.
1590 (f_printchar): Likewise.
1591 (f_printstr): Likewise.
1592 * expprint.c (print_subexp_standard): Update.
1593 * charset.h (target_wide_charset): Declare.
1594 (c_target_char_has_backslash_escape, c_parse_backslash,
1595 host_char_print_literally, host_char_to_target,
1596 target_char_to_host, target_char_to_control_char): Remove.
1597 (enum transliterations): New type.
1598 (convert_between_encodings): Declare.
1599 (HOST_ESCAPE_CHAR): New define.
1600 (host_letter_to_control_character, host_hex_value): Declare.
1601 (enum wchar_iterate_result): New enum.
1602 (struct wchar_iterator): Declare.
1603 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1604 wchar_push_back): Declare.
1605 * charset-list.h: New file.
1606 * c-valprint.c (textual_name): New function.
1607 (textual_element_type): Handle wide character types.
1608 (c_val_print): Pass original type to textual_element_type. Handle
1609 wide character types.
1610 (c_value_print): Use textual_element_type. Pass original type of
1612 * c-lang.h (enum c_string_type): New type.
1613 (c_printchar, c_printstr): Update.
1614 * c-lang.c (classify_type): New function.
1615 (print_wchar): Likewise.
1616 (c_emit_char): Add type argument. Handle wide characters.
1617 (c_printchar): Likewise.
1618 (c_printstr): Add type argument. Handle wide and multibyte
1620 (convert_ucn): New function.
1621 (emit_numeric_character): Likewise.
1622 (convert_octal): Likewise.
1623 (convert_hex): Likewise.
1624 (ADVANCE): New macro.
1625 (convert_escape): New function.
1626 (parse_one_string): Likewise.
1627 (evaluate_subexp_c): Likewise.
1628 (exp_descriptor_c): New global.
1629 (c_language_defn): Use exp_descriptor_c.
1630 (cplus_language_defn): Likewise.
1631 (asm_language_defn): Likewise.
1632 (minimal_language_defn): Likewise.
1633 (charset_for_string_type): New function.
1634 * c-exp.y (%union): Add 'svec' and 'tsval'.
1636 (exp): Add CHAR production.
1637 (string_exp): Rewrite.
1638 (exp) <string_exp>: Rewrite.
1639 (tempbuf): Now global.
1640 (tempbuf_init): New global.
1641 (parse_string_or_char): New function.
1642 (yylex) <tempbuf>: Now global.
1643 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
1645 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
1646 (c_parse_escape): New function.
1647 * auxv.c (fprint_target_auxv): Update.
1648 * ada-valprint.c (ada_emit_char): Add type argument.
1649 (ada_printchar): Likewise.
1650 (ada_print_scalar): Update.
1651 (printstr): Add type argument. Update calls to ada_emit_char.
1652 (ada_printstr): Add type argument.
1653 (ada_val_print_array): Update.
1654 (ada_val_print_1): Likewise.
1655 * ada-lang.c (emit_char): Add type argument.
1656 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
1658 * gdb_locale.h: Include langinfo.h.
1659 * charset.c (_initialize_charset): Set default host charset from
1660 the locale. Don't register charsets. Add target-wide-charset
1661 commands. Call find_charset_names.
1662 (struct charset, struct translation): Remove.
1663 (GDB_DEFAULT_HOST_CHARSET): Remove.
1664 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
1665 (target_wide_charset_name): New global.
1666 (show_host_charset_name): Handle "auto".
1667 (show_target_wide_charset_name): New function.
1668 (host_charset_enum, target_charset_enum): Remove.
1669 (charset_enum): New global.
1670 (all_charsets, register_charset, lookup_charset, all_translations,
1671 register_translation, lookup_translation): Remove.
1672 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
1673 (iso_8859_print_literally, iso_8859_to_control,
1674 iso_8859_family_charset): Remove.
1675 (ebcdic_print_literally, ebcdic_to_control,
1676 ebcdic_family_charset): Remove.
1677 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
1678 register_iconv_charsets): Remove.
1679 (target_wide_charset_be_name, target_wide_charset_le_name): New
1681 (identity_either_char_to_other): Remove.
1682 (set_be_le_names, validate): New functions.
1683 (backslashable, backslashed, represented): Remove.
1684 (default_c_target_char_has_backslash_escape): Remove.
1685 (default_c_parse_backslash, iconv_convert): Remove.
1686 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
1687 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
1688 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
1689 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
1690 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
1691 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
1692 (table_convert_char, table_translation, simple_table_translation):
1694 (current_host_charset, current_target_charset,
1695 c_target_char_has_backslash_escape_func,
1696 c_target_char_has_backslash_escape_baton): Remove.
1697 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
1698 (host_char_to_target_func, host_char_to_target_baton): Remove.
1699 (target_char_to_host_func, target_char_to_host_baton): Remove.
1700 (cached_iconv_host_to_target, cached_iconv_target_to_host):
1702 (lookup_charset_or_error, check_valid_host_charset): Remove.
1703 (set_host_and_target_charsets): Remove.
1704 (set_host_charset, set_target_charset): Remove.
1705 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
1706 (set_target_wide_charset_sfunc): New function.
1707 (show_charset): Print target wide character set.
1708 (host_charset, target_charset): Rewrite.
1709 (target_wide_charset): New function.
1710 (c_target_char_has_backslash_escape): Remove.
1711 (c_parse_backslash): Remove.
1712 (host_letter_to_control_character): New function.
1713 (host_char_print_literally): Remove.
1714 (host_hex_value): New function.
1715 (target_char_to_control_char): Remove.
1716 (cleanup_iconv): New function.
1717 (convert_between_encodings): New function.
1718 (target_char_to_host): Remove.
1719 (struct wchar_iterator): Define.
1720 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1721 wchar_push_back): New functions.
1722 (do_cleanup_iterator): New function.
1723 (char_ptr): New typedef.
1724 (charsets): New global.
1725 (add_one, find_charset_names): New functions.
1726 (default_charset_names): New global.
1727 (auto_host_charset_name): Likewise.
1728 * aclocal.m4, config.in, configure: Rebuild.
1729 * configure.ac: Call AM_LANGINFO_CODESET.
1730 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
1731 (AM_ICONV): Invoke earlier.
1732 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
1733 LIBICONV_LIBDIR. Check for libiconv in build tree.
1734 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
1735 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
1736 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
1737 * gdb_obstack.h (obstack_grow_wstr): New define.
1738 * gdb_wchar.h: New file.
1739 * defs.h: Include it.
1741 2009-03-20 Tom Tromey <tromey@redhat.com>
1742 Jan Kratochvil <jan.kratochvil@redhat.com>
1744 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
1745 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
1747 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
1749 * ada-typeprint.c (print_array_type): Do the NULL check
1752 2009-03-19 Tom Tromey <tromey@redhat.com>
1754 * utils.c (do_obstack_free): New function.
1755 (make_cleanup_obstack_free): Likewise.
1756 * defs.h (make_cleanup_obstack_free): Declare.
1758 2009-03-18 Doug Evans <dje@google.com>
1760 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
1761 int, not a long long.
1762 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
1764 * expprint.c (dump_raw_expression): Print note if non-NULL.
1766 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
1769 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
1771 * Makefile.in: Update license to GPLv3.
1772 * ada-exp.y: Update license to GPLv3.
1773 * ada-lex.l: Update license to GPLv3.
1774 * c-exp.y: Update license to GPLv3.
1775 * cp-name-parser.y: Update license to GPLv3.
1776 * darwin-nat-info.c: Update license to GPLv3.
1777 * f-exp.y: Update license to GPLv3.
1778 * gdb_thread_db.h: Update license to GPLv3.
1779 * hppanbsd-nat.c: Update license to GPLv3.
1780 * hppanbsd-tdep.c: Update license to GPLv3.
1781 * hppaobsd-tdep.c: Update license to GPLv3.
1782 * jv-exp.y: Update license to GPLv3.
1783 * m2-exp.y: Update license to GPLv3.
1784 * objc-exp.y: Update license to GPLv3.
1785 * p-exp.y: Update license to GPLv3.
1786 * reply_mig_hack.awk: Update license to GPLv3.
1787 * reverse.c: Update license to GPLv3.
1788 * xtensa-xtregs.c: Update license to GPLv3.
1790 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1792 * remote.c (remote_close): Don't call generic_mourn_inferior.
1793 (remote_mourn_1): Call generic_mourn_inferior after closing the
1796 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1798 * remote.c (remote_start_remote): Add missing call to
1799 init_wait_for_inferior in non-stop mode.
1801 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1803 * breakpoint.c (bpstat_should_step): Only consider software
1804 watchpoints that have a location.
1806 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1808 Add a target_ops parameter to the to_kill method in struct target_ops.
1810 * target.h (struct target_ops): Add a "target_ops *" parameter to
1812 (target_kill): Remove macro. Add declaration.
1813 * target.c (debug_to_kill): Delete, no longer necessary.
1814 (target_kill): New function.
1815 (update_current_target): Stop inheriting the to_kill method.
1816 Do not de_fault it to no_process either.
1817 (setup_target_debug): Do not set current_target.to_kill.
1818 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
1819 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
1820 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
1823 2009-03-17 Doug Evans <dje@google.com>
1825 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
1826 glibc 2.3.2 and earlier.
1828 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1830 * frame.c (get_prev_frame_1): Do not perform the inner_frame
1831 sanity check if this_frame is not NORMAL.
1832 (frame_id_inner): Update the description of this function.
1834 2009-03-17 Hui Zhu <teawater@gmail.com>
1836 * stack.c: Change the introduce of "disassemble-next-line".
1838 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1840 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
1843 2009-03-17 Hui Zhu <teawater@gmail.com>
1845 * stack.c: Include valprint.h.
1846 (disassemble_next_line): New enum.
1847 (show_disassemble_next_line): New function. Show the current
1848 value of disassemble-next-line.
1849 (gdb_disassembly_stub_args): New struct for argument passing
1850 between function do_gdb_disassembly and function
1851 gdb_disassembly_stub.
1852 (gdb_disassembly_stub): New function. Helper for
1854 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
1855 the exception from the gdb_disassembly because it will be
1856 broken by filter sometime.
1857 (print_frame_info): If disassemble-next-line is set to auto
1858 or on and doesn't have the line debug messages for $pc,
1859 output the next instruction.
1860 If disassemble-next-line is set to on and there is line debug
1861 messages, output assembly codes for next line.
1862 (_initialize_stack): Make the "set disassemble-next-line"
1863 command an auto-boolean command. Change its class to
1864 class_stack. Place it in the top level set list. Extend help
1865 to describe the auto mode.
1867 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1869 * infrun.c (normal_stop): Don't overwrite old_chain.
1871 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1873 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
1874 which is undefined, by call to regcache_invalidate, which should
1875 do what the original author wanted to do.
1877 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1879 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
1880 (mips_create_inferior): Likewise.
1882 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1884 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
1886 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1888 * darwin-nat.c (darwin_resume): Fix a compiler warning when
1889 building on x86_64-darwin.
1891 2009-03-16 Tristan Gingold <gingold@adacore.com>
1893 * configure.tgt: Add handling for x86_64-darwin.
1895 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1897 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
1899 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1901 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
1902 Use the ops parameter to get to the target beneath, rather than
1903 using the current_target global. Using the current_target global
1904 was an unintended accident.
1906 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1908 Fix an error happening while loading symbols from a core file
1911 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
1912 to detect whether we're debugging a core file or not.
1914 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1916 Modernize the aix-thread later by getting rid of the base_target
1917 global. This brings back to life the AIX port which was otherwise
1918 crashing all the time.
1920 * aix-thread.c (base_target): Delete.
1921 (pd_enable): Do not set base_target.
1922 (aix_thread_attach): Use find_target_beneath instead of base_target.
1923 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
1924 (aix_thread_fetch_registers, aix_thread_store_registers),
1925 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
1926 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
1927 (aix_thread_kill): Delete. Does not seem necessary.
1928 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
1930 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1932 * stack.c (return_command <retval_exp>): New variables retval_expr
1933 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
1934 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
1935 if RETURN_TYPE is NULL.
1937 2009-03-14 Pedro Alves <pedro@codesourcery.com>
1939 * remote.c (PACKET_qAttached): New.
1940 (remote_query_attached): New.
1941 (remote_add_inferior): Add new `attached' argument. Handle it.
1942 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
1943 -1 to remote_add_inferior in new parameter.
1944 (extended_remote_attach_1): Adjust to pass 1 to
1945 remote_add_inferior in the new parameter.
1946 (extended_remote_create_inferior_1): Adjust to pass 0 to
1947 remote_add_inferior in the new parameter.
1948 (_initialize_remote): Add "set/show remote query-attached-packet"
1951 2009-03-13 Tom Tromey <tromey@redhat.com>
1953 * symtab.c (lookup_symbol_in_language): Use a cleanup.
1955 2009-03-13 Doug Evans <dje@google.com>
1957 * exceptions.h: Clean up some comments on catch_exceptions usage.
1958 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
1961 2009-02-17 Joel Brobecker <brobecker@adacore.com>
1963 The following patch helps getting rid of a warning inside solib-som.c.
1965 * source.c (source_full_path_of): Constify parameter filename.
1966 * defs.h (source_full_path_of): Update declaration accordingly.
1968 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1970 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
1971 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
1972 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
1974 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1976 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
1977 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
1979 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1981 * ada-tasks.c (ada_task_is_alive): Move up and make static.
1982 * ada-lang.h (ada_task_is_alive): Remove declaration.
1984 2009-03-12 Jerome Guitton <guitton@adacore.com>
1986 * ada-lang.c (ada_delta): Change the type of numerators and
1987 denominators to DOUBLEST, as they may not fit into a long.
1988 (scaling_factor): Ditto.
1990 2009-03-12 Jerome Guitton <guitton@adacore.com>
1992 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
1994 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1996 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
1997 types, if we are unable to determine the actual symbol type
1998 from its tag, then use the static approximation instead.
2000 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2002 Fix crash printing packed record with packed array.
2004 * ada-lang.c (ada_modulus_from_name): New function.
2005 (ada_modulus): In the case where the type length is bigger than
2006 the size of the type used to hold the bounds, try determining
2007 the modulus from the type name.
2008 (ada_value_primitive_packed_val): Fix bug in the computation of
2009 ntarg causing an out-of-buffer invalid access.
2011 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2013 Fix segfault when printing short_integer'last.
2015 * ada-lang.c (ada_find_any_type): Search in the primitive types
2016 if a symbol could not be found.
2018 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2020 * ada-tasks.c (task_states,long_task_states): Add new states
2021 Activating and Acceptor_Delay_Sleep. Update the description
2022 of state Acceptor_Sleep.
2024 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
2026 Fix a build failure on Darwin following some changes in
2027 the profile of some target_ops methods.
2029 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
2031 (darwin_stop_inferior, darwin_detach): Likewise.
2033 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
2035 Include token in ^running notification for CLI commands.
2037 * mi/mi-main.c (mi_execute_command): Set current_token here.
2038 (mi_cmd_execute): Do not set current_token here.
2040 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
2044 * mi/mi-main.c (mi_print_timing_maybe): New.
2045 (captured_mi_execute_command): Simplify. Output timings to
2047 (mi_execute_async_cli_command): Do not print timings.
2048 * mi/mi-main.h (mi_print_timing_maybe): Declare.
2049 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
2051 2009-03-12 Jerome Guitton <guitton@adacore.com>
2053 * xcoffread.c (process_linenos): Check if the line in the
2054 include table refers to the main source file and, if so,
2055 add them to the main subfile.
2057 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2059 Fix a build failure on AIX introduced after a change in the profile
2060 of some of the "methods" in the target_ops structure.
2061 * aix-thread.c: Add missing target_ops parameter throughout.
2063 Implement Ada task switching on AIX.
2064 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
2065 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
2067 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
2069 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
2070 value_mark and value_free_to_mark.
2071 * objfiles.c (free_objfile): Call objfile_free_data before
2074 2009-03-10 Hui Zhu <teawater@gmail.com>
2076 * disasm.c (gdb_disassembly): Remove unused argument
2078 * disasm.h (gdb_disassembly): Ditto.
2079 * cli/cli-cmds.c (print_disassembly): Ditto.
2080 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
2082 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
2084 * solib.c (solib_contains_address_p): New function.
2085 (solib_name_from_address): Use it.
2086 * printcmd.c (display_uses_solib_p): Use it.
2087 * solib.h (solib_contains_address_p): Declare it.
2089 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2091 * varobj.c (free_variable): Call value_free.
2093 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2096 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
2097 Move the variable `macinfo_type' out of the loop. Create a new
2098 processing pass before the current one to pre-create `current_file'.
2099 New complaint on misplaced zero/non-zero definitions/includes.
2100 Skip first DW_MACINFO_start_file with `at_commandline' set.
2102 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
2104 * solib.c (reload_shared_libraries): Give
2105 inferior a chance to reset solib breakpoint.
2108 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
2110 * windows-nat.c (dr): Redefine to use largest possible integer which
2112 (cygwin_set_dr): Avoid coercion.
2114 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
2116 * windows-nat.c (windows_create_inferior): Implement --tty handling on
2119 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
2121 Rename solib_address to solib_name_from_address.
2122 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
2123 (disable_breakpoints_in_unloaded_shlib): Update.
2124 * printcmd.c (display_uses_solib_p): Likewise.
2125 * stack.c (print_frame): Likewise.
2129 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
2131 * printcmd.c (do_one_display): Reparse exp_string.
2132 (display_uses_solib_p): New function.
2133 (clear_dangling_display_expressions): New function.
2134 (_initialize_printcmd): Add observer.
2135 * solib.c (no_shared_libraries): Swap order of calls to
2136 clear_solib and objfile_purge_solibs.
2138 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2140 Implement the target-specific part of Ada tasking support
2143 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
2144 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
2146 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2148 Get rid of the global "base_target" and use "find_target_beneath"
2149 to find the underlying target.
2150 * dec-thread.c (base_target): Delete.
2151 (enable_dec_thread): Remove assignement to base_target.
2152 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
2153 (dec_thread_fetch_registers, dec_thread_store_registers)
2154 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
2155 Update the function profile if necessary.
2156 Use find_target_beneath to call the same method but from
2157 the underlying target, removing the need for "base_target".
2159 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
2160 Fix a copy/paste error in a few debug traces...
2162 * solib-osf.c (init_so): Use a simpler method for computing
2163 the size of lm_info structure. This also gets rid of warning
2164 emitted by the compiler.
2166 2009-03-05 Pedro Alves <pedro@codesourcery.com>
2168 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
2169 duplicates of permanent breakpoints.
2171 2009-03-04 Pedro Alves <pedro@codesourcery.com>
2173 * inferior.h (notice_new_inferior): Declare.
2174 * infcmd.c (notice_new_inferior): New.
2175 * remote.c (remote_add_inferior, remote_add_thread): New.
2176 (notice_new_inferiors): Rename to...
2177 (remote_notice_new_inferior): ... this. Add RUNNING argument.
2178 Use remote_add_thread instead of add_thread, passing it the
2179 RUNNING argument. Add an inferior with remote_add_inferior. If
2180 we just learned about an inferior, call notice_new_inferior.
2181 (record_currthread): Adjust.
2182 (remote_threads_info): Adjust to use remote_notice_new_inferior.
2183 (remote_start_remote, extended_remote_attach_1): Use
2184 remote_add_inferior.
2185 (process_stop_reply): Adjust. Call remote_notice_new_inferior
2186 after handling expedited registers and watchpoint state.
2187 (extended_remote_create_inferior_1): Use remote_add_inferior.
2189 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
2191 * infcmd.c (registers_info): Remove register number case.
2193 2009-03-03 Pedro Alves <pedro@codesourcery.com>
2195 * top.c (quit_target): Check for target_has_execution before
2196 killing or detaching from inferiors.
2198 2009-03-02 Joel Brobecker <brobecker@adacore.com>
2200 Remove some unused routines.
2202 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
2204 * ada-lang.c (ada_task_list_iterator_ftype)
2205 (iterate_over_live_ada_tasks): Delete.
2206 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
2209 2009-03-01 Doug Evans <dje@google.com>
2211 * symtab.c: Remove trailing whitespace throughout the file.
2212 (expand_line_sal): Fix some typos and whitespace.
2214 * Makefile.in (clean): rm -f $(DEPDIR)/*.
2216 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
2217 (init.c): signals/ -> common/.
2218 (signals.o): Update.
2219 * target.h (target_signal_to_string,target_signal_to_string)
2220 (target_signal_from_name,target_signal_to_host_p)
2221 (target_signal_from_host,target_signal_to_host): Move to ...
2222 * common/gdb_signals.h: ... here. New file.
2223 * common/signals.c: Moved here from signals/signals.c.
2224 #include gdb_signals.h, remove #include of target.h in gdb case.
2225 (target_signal_from_command,default_target_signal_to_host)
2226 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
2228 Include thread ID in target_wait debugging output.
2229 * infrun.c (print_target_wait_results): New function.
2230 (wait_for_inferior,fetch_inferior_event): Call it.
2232 2009-02-27 Pedro Alves <pedro@codesourcery.com>
2234 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
2235 with a ptid_t field.
2236 * linux-thread-db.c (thread_get_info_callback): Build the ptid
2237 using the pid stored in proc_handle.ptid.
2238 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
2239 (check_for_thread_db, thread_db_detach, check_event)
2240 (thread_db_mourn_inferior, find_new_threads_callback)
2241 (thread_db_find_new_threads_1): Adjust.
2242 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
2243 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
2245 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
2247 * valprint.c (read_string): Rework clean-up logic. Use
2248 free_current_contents to clean-up buffer.
2250 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
2252 * MAINTAINERS: Update e-mail address.
2254 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
2256 * python/python-utils.c (python_string_to_unicode): Always return
2258 (python_string_to_target_string): Decrement transient python
2260 (python_string_to_host_string): Likewise.
2262 2007-02-26 Pedro Alves <pedro@codesourcery.com>
2264 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
2265 call to super_fetch_registers.
2266 (mips64_linux_store_registers): Pass `ops' to call to
2267 super_store_registers.
2269 2009-02-25 Doug Evans <dje@google.com>
2271 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
2274 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
2275 disabled_shlib_breaks, unused.
2277 * printcmd.c (build_address_symbolic): Fix comment.
2279 2009-02-25 Hui Zhu <teawater@gmail.com>
2281 * cli/cli-script.c (define_command): Add _() to query.
2282 * gnu-nat.c (inf_validate_task_sc): Ditto.
2283 * infcmd.c (kill_if_already_running): Ditto.
2284 (jump_command): Ditto.
2285 (attach_command): Ditto.
2286 * inflow.c (kill_command): Ditto.
2287 * infrun.c (handle_command): Ditto.
2288 * maint.c (maintenance_dump_me): Ditto.
2289 * memattr.c (mem_delete_command): Ditto.
2290 * monitor.c (monitor_interrupt_query): Ditto.
2291 * nto-procfs.c (interrupt_query): Ditto.
2292 * printcmd.c (undisplay_command): Ditto.
2293 * remote-mips.c (mips_kill): Ditto.
2294 * remote.c (interrupt_query): Ditto.
2295 * solib-irix.c (irix_open_symbol_file_object): Ditto.
2296 * solib-osf.c (osf_open_symbol_file_object): Ditto.
2297 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
2298 * solib-som.c (som_open_symbol_file_object): Ditto.
2299 * solib-svr4.c (open_symbol_file_object): Ditto.
2300 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
2301 * target.c (kill_or_be_killed): Ditto.
2302 * tracepoint.c (delete_trace_command): Ditto.
2303 * top.c (quit_confirm): Add _() to s that will be used
2306 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
2308 Fix windows-nat.c compilation failure.
2310 * windows-nat.c (windows_thread_alive): Fix forward declaration.
2311 (get_windows_debug_event): Add ops parameter to call to windows_resume.
2313 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2315 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
2317 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
2319 * symtab.c (find_line_symtab): Initialize exact to avoid
2322 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2324 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
2325 `ops' to recursive call.
2327 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2329 * corelow.c (get_core_registers): Adjust.
2330 (core_file_thread_alive): Rename to...
2331 (core_thread_alive): ... this.
2332 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
2333 (init_core_ops): Adjust.
2334 (coreops_suppress_target): Delete.
2335 (_initialize_corelow): Unconditionally add core_ops.
2336 * procfs.c: Include "inf-child.h".
2337 (procfs_ops): Delete.
2338 (init_procfs_ops): Delete. Reimplement as...
2339 (procfs_target): ... this, inheriting from inf-child.
2340 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
2341 (procfs_prepare_to_store): Delete.
2342 (procfs_store_registers, procfs_resume): Adjust.
2343 (procfs_open): Delete.
2344 (procfs_suppress_run): Delete.
2345 (procfs_can_run): Delete.
2346 (procfs_mourn_inferior): Adjust.
2347 (procfs_init_inferior): Add target_ops parameter. Adjust.
2348 (procfs_create_inferior): Don't pass procfs_init_inferior to
2349 fork_inferior. Instead call it after fork_inferior returns.
2350 (procfs_find_new_threads): Adjust.
2351 (_initialize_procfs): Adjust to use procfs_target instead of
2353 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
2354 (lwp_to_thread): Use target_thread_alive.
2355 (sol_thread_open): Delete.
2356 (sol_thread_attach): Delete.
2357 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
2358 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
2359 to use find_target_beneath.
2360 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
2361 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
2362 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
2363 (check_for_thread_db): New.
2364 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
2365 (sol_thread_new_objfile): Call check_for_thread_db.
2366 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
2367 (sol_thread_can_run): Delete.
2368 (sol_thread_alive): Adjust to use find_target_beneath.
2369 (sol_thread_stop): Delete.
2370 (rw_common): Use target_write_memory or target_read_memory.
2371 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
2372 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
2373 (solaris_pid_to_str): Remove check for libthread_db initialization
2375 (sol_find_new_threads): Remove check for libthread_db
2376 initialization failing, or for an invalid inferior_ptid. Adjust
2377 to use find_target_beneath.
2378 (sol_core_open, sol_core_close, sol_core_detach,
2379 sol_core_files_info, sol_find_memory_regions,
2380 sol_make_note_section, ignore): Delete.
2381 (init_sol_thread_ops): Make it a thread_stratum target. Remove
2382 unneeded callback settings.
2383 (init_sol_core_ops): Delete.
2384 (_initialize_sol_thread): No longer call init_sol_core_ops, set
2385 procfs_suppress_run, or hack with core_ops.
2387 * target.h (struct target_ops): Add a target_ops * parameter to
2388 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
2389 and to_find_new_threads.
2390 (target_fetch_registers, target_store_registers)
2391 (target_thread_alive, target_find_new_threads): Redeclare as
2394 * target.c (update_current_target): Do not inherit or de_fault
2395 to_resume, to_fetch_registers, to_store_registers,
2396 to_thread_alive, to_find_new_threads.
2397 (target_resume): Adjust.
2398 (target_thread_alive, target_find_new_threads): New.
2399 (debug_to_resume, debug_to_fetch_registers): Delete.
2400 (target_fetch_registers): New.
2401 (debug_to_store_registers): Delete.
2402 (target_store_registers): New.
2403 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
2404 (setup_target_debug): Adjust.
2406 * gdbcore.h (core_ops): Delete declaration.
2408 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
2409 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
2410 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
2411 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
2412 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
2413 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
2414 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
2415 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
2416 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
2417 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
2418 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
2419 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
2420 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
2421 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
2423 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
2424 * gdbarch.h, gdbarch.c: Regenerate.
2426 * sol2-tdep.c: Include "inferior.h".
2427 (sol2_core_pid_to_str): New.
2428 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
2430 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2431 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2432 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2433 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2435 2009-02-22 Doug Evans <dje@google.com>
2437 * exec.c (exec_file_attach): Fix comment.
2439 2009-02-22 Pedro Alves <pedro@codesourcery.com>
2441 Silence a few -Wmissing-prototypes warnings.
2444 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
2446 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
2447 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
2448 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
2449 (_initialize_amd64nbsd_tdep): ... this.
2450 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
2451 (_initialize_arm_linux_tdep): Declare.
2452 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
2453 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
2454 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
2455 * avr-tdep.c (avr_return_value): Make it static.
2456 (avr_frame_unwind_cache): Ditto.
2457 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
2458 (bsd_uthread_solib_loaded): Ditto.
2459 (bsd_uthread_solib_unloaded): Ditto.
2460 (bsd_uthread_target): Ditto.
2461 (_initialize_bsd_uthread): Declare.
2462 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
2463 (cris_frame_unwind_cache): Ditto.
2464 * frv-tdep.c (frv_return_value): Ditto.
2465 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
2466 (h8300h_use_struct_convention): Ditto.
2467 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
2469 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
2471 * hppabsd-tdep.c: Include hppabsd-tdep.h.
2472 (hppabsd_find_global_pointer): Make it static.
2473 * hppabsd-tdep.h: New.
2474 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
2475 (hppabsd_init_abi): Remove declaration.
2476 (_initialize_hppabsd_tdep): Remove declaration.
2477 (_initialize_hppanbsd_tdep): Declare.
2478 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
2479 (hppabsd_init_abi): Delete declaration.
2480 (hppaobsd_init_abi): Make it static.
2481 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
2482 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
2483 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
2484 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
2485 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
2486 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
2487 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
2488 (_initialize_m32c_tdep): Declare.
2489 * m32r-rom.c (_initialize_m32r_rom): Declare.
2490 * m32r-tdep.c (m32r_skip_prologue): Make it static.
2491 (m32r_return_value): Ditto.
2492 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
2493 (m68hc11_return_value): Ditto.
2494 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
2495 * m88k-tdep.c (m88k_frame_cache): Make it static.
2496 * mep-tdep.c (mep_gdb_print_insn): Ditto.
2497 (mep_return_value): Ditto.
2498 (_initialize_mep_tdep): Declare.
2499 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
2500 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
2501 (mips_linux_syscall_next_pc): Ditto.
2502 (_initialize_mips_linux_tdep): Declare.
2503 * mips-tdep.c (mips_single_step_through_delay): Make it static.
2504 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
2505 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
2506 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
2507 * mt-tdep.c (_initialize_mt_tdep): Declare.
2508 * nbsd-tdep.c: Include nbsd-tdep.h.
2509 * nto-tdep.c (find_load_phdr): Make it static.
2510 (_initialize_nto_tdep): Declare.
2511 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
2513 (_initialize_ppc_linux_tdep): Declare.
2514 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
2515 (m32r_insert_watchpoint, m32r_remove_watchpoint)
2516 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
2518 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
2519 * rs6000-nat.c: Include xcoffread.h.
2520 (find_toc_address): Don't extern declare get_toc_offset. Adjust
2521 to call xcoff_get_to_offset.
2522 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
2523 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
2524 (rs6000_skip_trampoline_code): Make static.
2525 * s390-tdep.c (s390_regset_from_core_section): Ditto.
2526 * sh-tdep.c (sh_register_reggroup_p): Ditto.
2527 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
2528 (_initialize_shnbsd_tdep): Declare.
2529 * solib-frv.c (displacement_from_map): Make static.
2530 (_initialize_frv_solib): Declare.
2531 * solib-irix.c (fetch_lm_info): Make static.
2532 (_initialize_irix_solib): Declare.
2533 * solib-som.c: Include solib-som.h.
2534 (som_solib_select): Line break.
2535 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
2536 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
2537 (_initialize_sparcnbsd_tdep): ... this.
2538 * spu-tdep.c (spu_software_single_step): Make it static.
2539 (_initialize_spu_tdep): Declare.
2540 * vax-tdep.c (vax_frame_cache): Make it static.
2541 * xcoffread.c: Include xcoffread.h.
2542 (get_toc_offset): Rename to ...
2543 (xcoff_get_toc_offset): ... this.
2544 (_initialize_xcoffread): Declare.
2546 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
2547 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
2549 (_initialize_xtensa_tdep): Declare.
2551 2008-02-21 Pedro Alves <pedro@codesorcery.com>
2553 Silence a few -Wmissing-prototypes warnings.
2556 * amd64-nat.c: Include "amd64-nat.h".
2557 * fork-child.c (_initialize_fork_child): Ditto.
2558 * gcore.c (_initialize_gcore): Ditto.
2559 * inf-ptrace.c: Include "inf-ptrace.h".
2560 (inf_ptrace_store_registers): Make it static.
2561 * linux-nat.c (linux_nat_terminal_ours): Make it static.
2562 (_initialize_linux_nat): Declare before definition.
2563 * linux-tdep.c: Include "linux-tdep.h".
2564 * linux-thread-db.c (_initialize_thread_db): Declare before
2566 * proc-service.c (_initialize_proc_service): Ditto.
2567 * remote.c (remote_send_printf): Make it static.
2568 * solib.c: Include "solib.h".
2569 * symfile-mem.c (_initialize_symfile_mem): Declare before
2571 * ada-lang.c (ada_la_decode, ada_match_name)
2572 (ada_suppress_symbol_printing, ada_is_array_type)
2573 (ada_value_ptr_subscript, ada_array_length)
2574 (ada_to_static_fixed_value): Make them static.
2575 (_initialize_ada_language): Declare before definition.
2576 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
2577 (ada_task_list_changed, ada_new_objfile_observer): Make them
2579 (_initialize_tasks): Declare before definition.
2580 * addrmap.c (_initialize_addrmap): Declare before definition.
2581 * auxv.c (default_auxv_parse): Make it static.
2582 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
2584 * breakpoint.c (remove_sal): Add line break.
2585 (expand_line_sal_maybe): Make it static.
2586 * cp-name-parser.y: Include "cp-support.h".
2587 * cp-valprint.c (cp_find_class_member): Make it static.
2588 * eval.c (value_f90_subarray): Ditto.
2589 * exceptions.c (print_any_exception): Ditto.
2590 * findcmd.c (_initialize_mem_search): Declare before definition.
2591 * frame.c (frame_observer_target_changed): Make it static.
2592 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
2593 * inf-child.c: Include "inf-child.h".
2594 * inferior.h (valid_inferior_id): Rename to ...
2595 (valid_gdb_inferior_id): ... this.
2596 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
2598 * jv-lang.c (java_language_arch_info): Make it static.
2599 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
2600 * osdata.c (info_osdata_command): Make it static.
2601 * regcache.c (regcache_observer_target_changed): Make it static.
2602 * reverse.c (_initialize_reverse): Declare before definition.
2603 * stabsread.c (cleanup_undefined_types_noname)
2604 (cleanup_undefined_types_1): Make them static.
2605 * symfile.c (place_section): Make it static.
2606 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
2607 * target-descriptions.c (_initialize_target_descriptions): Declare
2609 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
2610 (find_default_is_async_p, find_default_supports_non_stop): Make
2612 (target_supports_non_stop): Add prototype.
2613 (dummy_pid_to_str): Make it static.
2614 * utils.c (_initialize_utils): Declare before definition.
2615 * ada-exp.y (_initialize_ada_exp): Declare before definition.
2616 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
2617 * target.h (struct target_ops): Add a prototype to the
2618 to_can_execute_reverse callback.
2619 * macroscope.c (_initialize_macroscope): Declare before definition.
2620 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
2621 * python/python.c (_initialize_python): Declare before definition.
2622 * tui/tui-command.c: Include "tui/tui-command.h".
2623 * tui/tui-data.c (init_content_element, init_win_info): Make them
2625 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
2626 * tui/tui-interp.c (_initialize_tui_interp): Declare before
2628 * tui/tui-layout.c: Include "tui/tui-layout.h".
2629 (_initialize_tui_layout): Declare before definition.
2630 * tui/tui-regs.c: Include "tui/tui-regs.h".
2631 (tui_display_reg_element_at_line): Make it static.
2632 (_initialize_tui_regs): Declare before definition.
2633 * tui/tui-stack.c (_initialize_tui_stack): Declare before
2635 * tui/tui-win.c: Include "tui/tui-win.h".
2636 (_initialize_tui_win): Declare before definition.
2637 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
2638 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
2639 (tui_get_cmd_list): Add a prototype.
2640 * tui/tui-windata.c: Include tui-windata.h.
2641 * tui/tui-wingeneral.c (box_win): Make it static.
2642 * cli/cli-logging.c (show_logging_command): Make it static.
2643 (_initialize_cli_logging): Declare before definition.
2644 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
2647 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
2649 Extend use of i386_use_watchpoints to all i386 native files
2650 using hardware watchpoints.
2651 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
2652 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
2653 * windows-nat.c (init_windows_ops): Ditto.
2654 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
2655 * config/i386/nm-cygwin64.h: Ditto.
2656 * config/i386/nm-fbsd.h: Ditto.
2657 * config/i386/nm-go32.h: Ditto.
2659 2009-02-19 Joel Brobecker <brobecker@adacore.com>
2661 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
2663 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
2665 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
2666 (mi_interpreter_init): Register the above.
2667 * solib.c (clear_solib): Notify solib unload.
2668 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
2669 disable breakpoints on a.out targets.
2671 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
2673 * observer.c (observer_test_first_notification_function)
2674 (observer_test_second_notification_function)
2675 (observer_test_third_notification_function): Adjust prototype.
2677 2009-02-17 Pedro Alves <pedro@codesourcery.com>
2679 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
2680 (ALL_TARGET_OBS): Add dicos-tdep.o.
2681 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
2682 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
2684 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
2686 * dicos-tdep.h, dicos-tdep.c: New.
2687 * amd64-dicos-tdep.c: New.
2688 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
2689 inferior.h. Include dicos-tdep.h.
2690 (i386_dicos_init_abi): Call dicos_init_abi.
2691 (i386_dicos_bfd_has_symbol_p): Delete.
2692 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
2694 * NEWS: Mention x86-64 DICOS target support.
2696 2009-02-16 Doug Evans <dje@google.com>
2698 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
2699 All callers updated.
2700 (amd64_get_insn_details): Handle more 3-byte opcode insns.
2701 (amd64_breakpoint_p): Delete.
2702 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
2703 don't back up pc to the start of the int3.
2704 * i386-tdep.c: #include opcode/i386.h.
2705 (i386_skip_prefixes): New function.
2706 (i386_absolute_jmp_p): Constify argument.
2707 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
2708 (i386_breakpoint_p): Delete.
2709 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
2710 When fixing up after stepping an int3, don't back up pc to the start
2713 2009-02-16 Pedro Alves <pedro@codesourcery.com>
2715 * corelow.c (core_close): Don't hardcode the core's pid.
2716 (core_open): Find core threads before calling
2717 post_create_inferior.
2718 (add_to_thread_list, get_core_register_section): Take into account
2719 systems where the regset section names encode the pid of the
2722 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
2723 * gdbarch.h, gdbarch.c: Regenerate.
2725 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2726 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2727 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2728 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2730 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
2732 Include frame information for *stopped due to CLI commands.
2734 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
2735 * infcmd.c (finish_command_continuation): Pass '1' for
2736 'print_frame' parameter to the observer.
2737 * infrun.c (normal_stop): Don't print mi-specific information
2738 here. Pass 'stop_print_frame' to the 'print_frame' parameter
2740 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
2741 If we need to print frame, and current uiout is not the MI one,
2744 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
2746 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
2747 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
2749 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2752 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
2753 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
2755 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
2757 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
2758 for DW_ATE_signed_char and DW_ATE_unsigned_char
2759 for pascal language.
2761 2009-02-11 Jim Meyering <meyering@redhat.com>
2762 Jan Kratochvil <jan.kratochvil@redhat.com>
2764 Avoid NULL dereference.
2765 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
2766 New variable func_type.
2768 2009-02-11 Pedro Alves <pedro@codesourcery.com>
2770 * gdbarch.c: Regenerate.
2772 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
2774 * p-lang.c (is_pascal_string_type): Fix comment.
2775 Determine exact size of char elements for GPC
2777 (pascal_printstr): Handle char width of 2 or 4.
2778 * p-valprint.c (pascal_val_print): Handle char
2781 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
2783 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
2784 inside the loop. Only call addrmap_set_empty if the compilation unit
2785 had DW_AT_high_pc and DW_AT_low_pc. Update call to
2786 scan_partial_symbols.
2787 (scan_partial_symbols): Take NEED_PC argument and pass it along with
2789 (add_partial_namespace): Take NEED_PC argument and pass it through.
2790 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
2793 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2795 * NEWS: Mention inspecting extra signal information, $_siginfo,
2796 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
2798 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2800 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
2803 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2805 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
2806 (compat_timer_t, compat_clock_t, struct compat_timeval)
2807 (compat_sigval_t, compat_siginfo_t): New types.
2808 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
2809 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
2810 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
2811 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
2812 (amd64_linux_siginfo_fixup): New.
2813 * linux-nat.c (linux_nat_siginfo_fixup): New.
2814 (siginfo_fixup): New.
2815 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
2816 siginfo layout expected by ptrace and the siginfo layout of the
2818 (linux_nat_set_siginfo_fixup): New.
2819 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
2821 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2823 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
2824 * infrun.c (siginfo_value_read, siginfo_value_write): New.
2825 (siginfo_value_funcs): New.
2826 (siginfo_make_value): New.
2827 (_initialize_infrun): Create the $_siginfo convenience variable.
2828 * gdbtypes.h (append_composite_type_field_aligned): Declare.
2829 * gdbtypes.c (append_composite_type_field): Rename to...
2830 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
2831 argument. Handle it.
2832 (append_composite_type_field): Rewrite on top of
2833 append_composite_type_field_aligned.
2834 * value.h (internalvar_make_value): New typedef.
2835 (struct internalvar) <make_value>: New field.
2836 (create_internalvar_type_lazy): Declare.
2837 * value.c (create_internalvar): Clear make_value.
2838 (create_internalvar_type_lazy): New.
2839 (value_of_internalvar): If make_value is set use it.
2840 (preserve_values): Skip internal variables that don't have a
2842 * gdbarch.sh (get_siginfo_type): New.
2843 * gdbarch.h, gdbarch.c: Regenerate.
2845 * linux-tdep.h, linux-tdep.c: New.
2846 * amd64-linux-tdep.c: Include "linux-tdep.h".
2847 (amd64_linux_init_abi): Register linux_get_siginfo_type and
2848 linux_get_siginfo_mapper.
2849 * i386-linux-tdep.c: Include "linux-tdep.h".
2850 (i386_linux_init_abi): Register linux_get_siginfo_type and
2851 linux_get_siginfo_mapper.
2852 * arm-linux-tdep.c: Include "linux-tdep.h".
2853 (i386_linux_init_abi): Register linux_get_siginfo_type and
2854 linux_get_siginfo_mapper.
2856 * linux-nat.c (linux_xfer_siginfo): New.
2857 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2858 * remote.c (PACKET_qXfer_siginfo_read)
2859 (PACKET_qXfer_siginfo_write): New.
2860 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
2861 "qXfer:siginfo:write" features.
2862 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2863 (_initialize_remote): Add "set/show remote read-siginfo-object"
2864 and "set/show remote write-siginfo-object" commands.
2866 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
2867 (HFILES_NO_SRCDIR): Add linux-tdep.h.
2868 (ALLDEPFILES): Add linux-tdep.c.
2870 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
2871 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
2874 2009-02-06 Jim Blandy <jimb@codesourcery.com>
2875 Daniel Jacobowitz <dan@codesourcery.com>
2876 Vladimir Prus <vladimir@codesourcery.com>
2877 Pedro Alves <pedro@codesourcery.com>
2879 * defs.h (enum lval_type): New value: lval_computed.
2880 * value.h (struct lval_funcs): New type.
2881 (allocate_computed_value, value_computed_funcs)
2882 (value_computed_closure): New declarations.
2883 * value.c (struct value): Add a structure to the location union
2884 for computed lvalues, containing 'funcs' and 'closure' members.
2885 (allocate_computed_value, value_computed_funcs)
2886 (value_computed_closure): New functions.
2887 (value_free): For computed lvalues, call the closure's
2888 'free_closure' function before freeing the value itself.
2889 (value_copy): If we're copying an lval_computed value, call the
2890 closure's 'copy_closure' function.
2891 (set_value_component_location): If the original value is a
2892 computed lvalue, then call the closure's 'copy_closure' function.
2893 (value_of_internalvar): If an internal variable's value is a
2894 computed lvalue, make retrieving its value produce an equivalent
2896 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
2897 their read function.
2898 (value_assign): Assign to computed lvalues by calling their write
2901 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2903 * linux-nat.c (linux_nat_wait): Adjust.
2904 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
2905 * linux-nat.h (thread_db_init): Delete declaration.
2906 * linux-thread-db.c (target_beneath): Delete.
2907 (thread_db_init): Delete.
2908 (thread_db_detach): Use find_target_beneath.
2909 (thread_db_wait): Adjust interface. Use find_target_beneath.
2910 (thread_db_mourn_inferior): Use find_target_beneath.
2911 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
2912 (thread_db_async_mask): Delete.
2913 (thread_db_pid_to_str): Adjust interface. Use
2914 find_target_beneath.
2915 (thread_db_get_thread_local_address): Adjust interface. Use
2916 find_target_beneath.
2917 (init_thread_db_ops): Delete references to delete functions.
2918 * target.c (update_current_target): Don't inherit or default
2919 to_wait. Don't inherit to_pid_to_str and
2920 to_get_thread_local_address.
2921 (target_translate_tls_address): Look for a pushed target that
2922 implements to_get_thread_local_address, and use it instead of
2923 checking for target_get_thread_local_address_p.
2924 (target_wait, target_pid_to_str): Reimplement as functions.
2925 (dummy_pid_to_str): New.
2926 (init_dummy_target): Register it.
2927 (debug_to_wait): Delete.
2928 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
2929 to_get_thread_local_address accept a pointer to struct target_ops.
2930 (target_wait): Delete macro, and declare as function.
2931 (target_pid_to_str): Likewise.
2932 (target_get_thread_local_address)
2933 (target_get_thread_local_address_p): Delete.
2934 (noprocess): Add NORETURN and ATTR_NORETURN tags.
2935 * inf-ptrace.c (inf_ptrace_wait): Adjust.
2936 (inf_ptrace_pid_to_str): New.
2937 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
2938 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
2939 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
2940 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
2942 * corelow.c (core_pid_to_str): Adjust.
2943 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
2944 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
2945 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
2946 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
2947 * hpux-thread.c (hpux_thread_wait): Adjust.
2948 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
2949 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
2950 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
2951 * procfs.c (procfs_pid_to_str): Adjust.
2952 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
2953 * remote-mips.c (mips_wait): Adjust.
2954 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
2955 * remote.c (remote_wait, remote_pid_to_str)
2956 (remote_get_thread_local_address): Adjust.
2957 * rs6000-nat.c (rs6000_wait): Adjust.
2958 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
2959 (sol_thread_wait, solaris_pid_to_str): Adjust.
2960 * spu-linux-nat.c (spu_child_wait): Adjust.
2961 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2963 2009-02-06 Tom Tromey <tromey@redhat.com>
2965 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
2966 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
2967 (python-cmd.o): New target.
2968 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
2969 completer prototype.
2970 (add_cmd): Initialize destroyer member of cmd_list_element. Use
2971 make_symbol_completion_list_fn as completer.
2972 (delete_cmd): Call destroyer if one is set.
2973 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
2974 completer member. Add destroyer member.
2975 (set_cmd_completer): Add self parameter to
2976 completer prototype.
2977 * command.h (set_cmd_completer): Add cmd parameter to
2978 completer prototype.
2979 * completer.c (noop_completer, filename_completer,
2980 location_completer, expression_completer, command_completer): Adapt
2981 to new completer prototype.
2982 (complete_line_internal): Pass new parameter to completer function.
2983 * completer.h (noop_completer, filename_completer,
2984 location_completer, expression_completer, command_completer): Adapt
2985 prototypes to new completer prototype.
2986 * interps.c (interpreter_completer): Adapt to new completer
2988 * python/python-cmd.c: New file.
2989 * python/python-internal.h (gdbpy_initialize_commands): Add
2991 (gdbpy_doc_cst): Add forward declaration.
2992 * python/python.c (gdbpy_doc_cst): Declare.
2993 (_initialize_python): Call gdbpy_initialize_commands. Initialize
2995 * symtab.c (make_symbol_completion_list_fn): New function.
2996 * symtab.h (make_symbol_completion_list_fn): Add prototype.
2998 2009-02-06 Pedro Alves <pedro@codesourcery.com>
3000 * target.c (target_get_osdata): Check for equal or higher than
3001 process_stratum, not dummy_stratum.
3003 2009-02-06 Pedro Alves <pedro@codesourcery.com>
3005 * remote.c (extended_remote_can_run): Delete.
3006 (init_remote_ops): Don't register it.
3007 * target.c (target_get_osdata): Don't check for target_can_run.
3008 Instead any target that has already been pushed, otherwise
3009 fallback to the default run target.
3011 2009-02-06 Pedro Alves <pedro@codesourcery.com>
3013 * target.c (target_create_inferior, target_detach)
3014 (target_mourn_inferior, target_attach, target_close): Do target
3016 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
3017 (debug_to_mourn_inferior, debug_to_close): Delete.
3018 (setup_target_debug): Adjust.
3020 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3022 * target.h (target_stopped_data_address_p): Delete declaration,
3023 and don't define as macro.
3024 * target.c (target_stopped_data_address_p): Delete.
3026 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
3027 Tom Tromey <tromey@redhat.com>
3029 * python/python-utils.c (target_string_to_unicode): New function.
3030 * python/python-internal.h (target_string_to_unicode): New prototype.
3031 * python/python-value.c (valpy_string): New function.
3032 (value_object_methods): Add `string' entry.
3034 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3036 * target.h (target_tid_to_str): Delete.
3037 * thread.c (print_thread_info, thread_apply_all_command)
3038 (thread_apply_command, thread_command, do_captured_thread_select):
3039 Use target_pid_to_str instead of target_tid_to_str.
3040 * linux-fork.c (delete_fork_command): Likewise.
3042 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3044 * frame.c (has_stack_frames): Make public.
3045 (get_prev_frame): Don't allow a NULL this_frame anymore.
3046 * frame.h (has_stack_frames): Declare.
3047 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
3048 to get_prev_frame, instead start at get_current_frame.
3049 (varobj_create): Check has_stack_frames before getting any frame;
3050 eliminate one usage of deprecated_safe_get_selected_frame.
3052 2009-02-05 Tom Tromey <tromey@redhat.com>
3053 Thiago Jung Bauermann <bauerman@br.ibm.com>
3055 * python/python.c (GdbMethods): Move to bottom of file.
3056 (get_parameter, execute_gdb_command, gdbpy_write,
3057 gdbpy_flush): Remove forward declarations.
3058 (eval_python_from_control_command): Fix error checking of function
3059 PyRun_SimpleString. Fix error string.
3060 (python_command): Likewise.
3061 (execute_gdb_command): Added from_tty argument.
3063 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
3065 * language.h (language_dfn): Add la_get_string member.
3066 (LA_GET_STRING): New macro.
3067 (default_get_string): New prototype.
3068 * language.c (default_get_string): New function.
3069 (unknown_language_defn, auto_language_defn, local_language_defn): Use
3070 default_get_string for la_get_string.
3071 * c-lang.c (c_get_string): New function.
3072 (c_language_defn, cplus_language_defn, asm_language_defn): Use
3073 c_get_string for la_get_string.
3074 (minimal_language_defn): Likewise
3075 * ada-lang.c (ada_language_defn): Likewise.
3076 * f-lang.c (f_language_defn): Use default_get_string for
3078 * jv-lang.c (java_language_defn): Likewise.
3079 * m2-lang.c (m2_language_defn): Likewise.
3080 * objc-lang.c (objc_language_defn): Likewise.
3081 * p-lang.c (p_language_defn): Likewise.
3082 * scm-lang.c (scm_language_defn): Likewise.
3083 * typeprint.c (type_to_string): New function.
3084 * value.h (type_to_string): New prototype.
3085 * valprint.c (val_print_string): Factor out code for reading string
3086 from the inferior into its own function. Put 2 spaces after period
3088 (read_string): New function.
3089 * valprint.h (read_string): New prototype.
3091 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
3092 Tom Tromey <tromey@redhat.com>
3094 PR breakpoints/8079:
3095 * breakpoint.c (print_one_breakpoint): Use exp_string field
3096 to display expression of watchpoints.
3097 (mention): Likewise.
3098 (watch_command_1): Remove trailing whitespace from expression.
3099 * printcmd.c (struct display) <exp_string>: New field.
3100 (display_command): Set exp_string.
3101 (free_display): Free exp_string.
3102 (clear_displays): Use free_display.
3103 (do_one_display): Print exp_string.
3104 (display_info): Likewise.
3106 2009-02-04 Tom Tromey <tromey@redhat.com>
3107 Thiago Jung Bauermann <bauerman@br.ibm.com>
3108 Phil Muldoon <pmuldoon@redhat.com>
3110 * python/python-internal.h (gdbpy_get_value_from_history): Rename
3111 prototype to gdbpy_history.
3112 (gdbpy_is_string): Declare.
3113 (python_string_to_host_string): Declare.
3114 * python/python-utils.c (gdbpy_is_string): New function.
3115 (unicode_to_encoded_string): New function.
3116 (unicode_to_target_string): Use it.
3117 (python_string_to_host_string): New function.
3118 * python/python-value.c (valpy_address): New function.
3119 (convert_value_from_python): Use gdbpy_is_string. Change to throw
3120 Python exception instead of a GDB exception on error. Properly check
3122 (valpy_getitem): Convert field name to host string. Handle array
3123 accesses. Adapt to new behaviour of convert_value_from_python.
3124 (valpy_new): Adapt to new behaviour of convert_value_from_python.
3125 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
3126 VALPY_BITXOR, VALPY_BITOR>: New constants.
3127 (valpy_binop): Update. Adapt to new behaviour of
3128 convert_value_from_python.
3129 (valpy_invert): New function.
3130 (valpy_lsh): Likewise.
3131 (valpy_rsh): Likewise.
3132 (valpy_and): Likewise.
3133 (valpy_or): Likewise.
3134 (valpy_xor): Likewise.
3135 (valpy_richcompare): Call convert_value_from_python instead of doing
3137 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
3138 (gdbpy_get_value_from_history): Rename
3139 function to gdbpy_history.
3140 (gdbpy_initialize_values): Don't set tp_new.
3141 (value_object_type): Add valpy_new.
3142 (value_object_methods): Add `address' entry.
3143 (value_object_as_number): Update for new methods.
3144 * python/python.c (GdbMethods): Rename entry from
3145 `get_value_from_history' to `history'.
3147 2009-02-04 Jerome Guitton <guitton@adacore.com>
3149 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
3150 of type to guard against a crash.
3152 2009-02-04 Jerome Guitton <guitton@adacore.com>
3154 * value.c (value_from_contents_and_address): Always return
3155 a lval_memory value, even if address is null.
3157 2009-02-04 Tristan Gingold <gingold@adacore.com>
3159 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
3160 (amd64_darwin_sigcontext_addr): Ditto.
3161 (darwin_dwarf_signal_frame_p): Ditto.
3162 (i386_darwin_init_abi): Handle signal frames, use the const for
3164 (x86_darwin_init_abi_64): Ditto.
3166 2009-02-04 Tristan Gingold <gingold@adacore.com>
3168 * i386-tdep.c (i386_sigtramp_p): Make it public.
3169 * i386-tdep.h (i386_sigtramp_p): Declare.
3171 2009-02-04 Tristan Gingold <gingold@adacore.com>
3173 * machoread.c (macho_symfile_read): Read minsymtab also from
3175 (macho_symfile_read): Try to read dwarf2 frame info from main
3176 object file, but not from OSO files.
3177 (macho_symfile_offsets): Update section names for latest BFD
3179 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
3180 (x86_darwin_init_abi_64): Ditto.
3181 * solib-darwin.c: New file.
3182 * solib-darwin.h: New file.
3183 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
3185 2009-02-04 Tristan Gingold <gingold@adacore.com>
3187 * solist.h (struct target_so_ops): Comment fallback behavior for
3190 2009-02-03 Tom Tromey <tromey@redhat.com>
3192 * completer.c (add_struct_fields): Check type_name against NULL
3195 2009-02-03 Joel Brobecker <brobecker@adacore.com>
3197 * MAINTAINERS: Update Elena's email address.
3199 2009-02-02 Joel Brobecker <brobecker@adacore.com>
3201 * breakpoint (update_watchpoint): Minor comment adjustment.
3203 2009-02-02 Tom Tromey <tromey@redhat.com>
3206 * completer.c (count_struct_fields): Count method names.
3207 (add_struct_fields): Add matching method names.
3209 2009-02-02 Doug Evans <dje@google.com>
3211 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
3212 doing any further tcl/tk configury. Don't configure gdbtk if
3213 tcl or tk check fails.
3214 * aclocal.m4: Regenerate.
3215 * configure: Regenerate.
3217 2009-02-02 Tom Tromey <tromey@redhat.com>
3220 * valops.c (find_overload_match): Follow typedefs before taking
3221 address of object argument.
3223 2009-02-01 Doug Evans <dje@google.com>
3225 * target.h (target_waitstatus_to_string): Declare.
3226 * target.c (target_waitstatus_to_string): New function. Copied from
3227 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
3228 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
3229 TARGET_WAITKIND_NO_HISTORY.
3230 (debug_to_wait): Call it.
3231 * infrun.c (wait_for_inferior): If debug_infrun, print result of
3233 (fetch_inferior_event): Ditto.
3235 2009-01-30 Tom Tromey <tromey@redhat.com>
3237 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
3239 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3242 * thread.c (do_captured_list_thread_ids): Report the current
3245 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3247 * breakpoint.c (create_breakpoint, create_breakpoints)
3248 (break_command_really, set_breakpoint): New parameter enabled.
3249 (create_breakpoint, break_command_really): Make breakpoint
3250 disabled if so requested.
3251 * breakpoint.h (set_breakpoint): New parameter enabled.
3252 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
3254 2009-01-28 Doug Evans <dje@google.com>
3256 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
3257 (amd64_displaced_step_fixup): Declare.
3258 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
3259 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
3260 and make static global.
3261 (amd64_arch_regmap_len): New static global.
3262 (amd64_arch_reg_to_regnum): New function.
3263 (struct amd64_insn): New struct.
3264 (struct displaced_step_closure): New struct.
3265 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
3266 (rex_prefix_p,skip_prefixes)
3267 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
3268 (amd64_insn_length,amd64_get_unused_input_int_reg)
3269 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
3270 (amd64_displaced_step_copy_insn)
3271 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
3272 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
3273 (amd64_displaced_step_fixup): New functions.
3274 * amd64-linux-tdep.c: #include arch-utils.h.
3275 (amd64_linux_init_abi): Install displaced stepping support.
3277 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
3278 Jerome Guitton <guitton@adacore.com>
3280 * configure, config.in: Regenerated.
3281 * configure.ac: Add --with-system-gdbinit.
3282 * main.c (get_init_files): New.
3283 (captured_main): Use get_init_files. Load system gdbinit before
3285 (print_gdb_help): Print location of init files.
3287 2009-01-28 Pedro Alves <pedro@codesourcery.com>
3289 * corefile.c (generic_search): Delete disabled code.
3290 * gdbcore.h (generic_search): Delete declaration.
3292 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3294 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
3295 parent to the child.
3296 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
3297 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
3298 remove_breakpoints to remove breakpoints from the parent.
3300 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3302 PR backtrace/9458, PR backtrace/8864:
3303 * frame.c (create_new_frame): Update the frame's cached PC before
3304 finding its unwinder. Use frame_id_build to build the new frame's
3306 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
3307 array values from the ``args'' array values.
3309 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3311 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
3312 (create_array_type, create_set_type, init_flags_type)
3313 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
3314 with a call to XZALLOC or XCALLOC, and pairs of calls to
3315 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
3317 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3319 Add "maint set|show internal-error|internal-warning quit|corefile
3320 ask|yes|no" commands.
3323 * utils.c (internal_problem_ask, internal_problem_yes)
3324 (internal_problem_no, internal_problem_modes): New.
3325 (struct internal_problem): Remove FIXME. Make should_quit and
3326 should_dump_core types to char *.
3327 (internal_vproblem, internal_error_problem)
3328 (internal_warning_problem): Adjust.
3329 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
3331 (add_internal_problem_command): New.
3332 (_initialize_utils): New.
3334 2009-01-25 Pedro Alves <pedro@codesourcery.com>
3336 * infcmd.c (program_info): Use paddress instead of casting stop_pc
3339 2009-01-24 Pedro Alves <pedro@codesourcery.com>
3341 * infrun.c (normal_stop): Don't call
3342 deprecated_update_frame_pc_hack.
3343 * frame.c (deprecated_update_frame_pc_hack)
3344 (deprecated_update_frame_base_hack): Delete, and ...
3345 (create_new_frame): ... inline here.
3346 * frame.h (deprecated_update_frame_pc_hack)
3347 (deprecated_update_frame_base_hack): Delete declarations.
3349 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3351 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
3352 * cli/cli-setshow.c (do_setshow_command): Handle it.
3353 * command.h (enum var_types): Add var_zuinteger.
3354 (add_setshow_zuinteger_cmd): Declare.
3356 * valprint.c (_initialize_valprint): Change the set input-radix
3357 and set output-radix commands to zuinteger type.
3359 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3362 * infrun.c (normal_stop): Tag threads as stopped, and run the
3363 hook-stop before printing the stack frame.
3365 2009-01-22 Pedro Alves <pedro@codesourcery.com>
3368 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
3371 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
3373 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
3376 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
3379 * infcmd.c (signal_command): Do not specify a resume PC.
3381 2009-01-19 Doug Evans <dje@google.com>
3383 * dummy-frame.c (dummy_frame): Replace regcache member with
3385 (dummy_frame_push): Replace caller_regcache arg with caller_state.
3386 All callers updated.
3387 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
3388 (dummy_frame_pop): Rewrite. Verify requested frame is in the
3389 dummy frame stack. Restore program state.
3390 (cleanup_dummy_frames): Rewrite.
3391 (dummy_frame_sniffer): Update. Make static.
3392 * dummy-frame.h (regcache,frame_info): Delete forward decls.
3393 (inferior_thread_state): New forward decl.
3394 (dummy_frame_push): Update prototype.
3395 * frame.c (frame_pop): dummy_frame_pop now does all the work for
3397 * infcall.c (breakpoint_auto_delete_contents): Delete.
3398 (get_function_name,run_inferior_call): New fns.
3399 (call_function_by_hand): Simplify by moving some code to
3400 get_function_name, run_inferior_call. Inferior function call wrapped
3401 in TRY_CATCH so there's less need for cleanups and all exits from
3402 proceed are handled similarily. Detect program exit.
3403 Detect program stopping in a different thread.
3404 Make error messages more consistent.
3405 * inferior.h (inferior_thread_state): Declare (opaque type).
3406 (save_inferior_thread_state,restore_inferior_thread_state,
3407 make_cleanup_restore_inferior_thread_state,
3408 discard_inferior_thread_state, get_inferior_thread_state_regcache):
3410 (save_inferior_status): Update prototype.
3411 * infrun.c: (normal_stop): When stopped for the completion of an
3412 inferior function call, verify the expected stack frame kind.
3413 (inferior_thread_state): New struct.
3414 (save_inferior_thread_state,restore_inferior_thread_state,
3415 do_restore_inferior_thread_state_cleanup,
3416 make_cleanup_restore_inferior_thread_state,
3417 discard_inferior_thread_state,
3418 get_inferior_thread_state_regcache): New functions.
3419 (inferior_status): Move stop_signal, stop_pc, registers to
3420 inferior_thread_state. Remove restore_stack_info.
3421 (save_inferior_status): Remove arg restore_stack_info.
3422 All callers updated. Remove saving of state now saved by
3423 save_inferior_thread_state.
3424 (restore_inferior_status): Remove restoration of state now done by
3425 restore_inferior_thread_state.
3426 (discard_inferior_status): Remove freeing of registers, now done by
3427 discard_inferior_thread_state.
3429 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3431 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
3432 at a time, times NUM_TO_SCROLL.
3433 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
3434 fetch the selected frame if there is no stack.
3436 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3439 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
3441 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
3442 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
3443 is thrown while handling an event, finish the thread state.
3444 (normal_stop): Use finish_thread_state cleanup.
3445 * infcmd.c (run_command_1): If an error is thrown while starting
3446 the inferior, finish the thread state.
3448 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3450 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
3451 skip breakpoints without a location (pending breakpoints).
3453 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3456 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
3458 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
3460 * thread.c (thread_command): Move call to annotate_thread_changed
3462 (do_captured_thread_select): ... here, to avoid printing an
3463 annotation if the thread change generates an exception.
3465 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3467 * NEWS: Document x86_64/MinGW as a new native configuration.
3469 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3471 * NEWS: Move the documentation of "info os processes" to
3472 the appropriate section (documenting the new commands).
3474 2009-01-15 Doug Evans <dje@google.com>
3476 * target.h (target_signal_to_string): Make return type const char *.
3477 (target_signal_to_name): Ditto.
3478 (target_signal_from_name): Make arg const char *.
3479 * infrun.c (sig_print_info): Update.
3480 * signals/signals.c (signals): Make array and struct members const.
3481 (target_signal_to_string): Make return type const char *.
3482 (target_signal_to_name): Ditto.
3483 (target_signal_from_name): Make arg const char *.
3485 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3486 Tristan Gingold <gingold@adacore.com>
3488 * solist.h (struct target_so_ops): New member bfd_open.
3489 (solib_find): Add prototype.
3490 (solib_bfd_fopen): Add prototype.
3491 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
3492 from solib_bfd_open.
3493 (solib_bfd_open): Use ops->bfd_open override if present. Call
3494 solib_find and solib_bfd_open otherwise.
3496 * objfiles.h (OBJF_KEEPBFD): New define.
3497 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
3498 objfile flag is set.
3499 * solib.c (symbol_add_stub): Do not allocate second BFD for
3500 shared library; use OBJF_KEEPBFD flag on solib objfile.
3502 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3504 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
3506 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3508 * value.h (address_of_variable): Add prototype.
3509 (locate_var_value): Remove prototype.
3511 * findvar.c (read_var_value): Do not attempt to default frame
3513 (locate_var_value): Remove function.
3514 * valops.c (value_of_variable): Retrieve selected frame for
3515 symbols that require a frame when called with NULL block.
3516 * valops.c (address_of_variable): New function.
3518 * eval.c (evaluate_subexp_for_address): Call address_of_variable
3519 instead of calling locate_var_value.
3520 (evaluate_subexp_with_coercion): Likewise.
3522 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
3524 * NEWS: Document "define" for prefixed commands.
3525 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
3526 show_user_1 for prefix commands.
3527 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
3528 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
3529 commands. Return the containing command list.
3530 (define_command, document_command): Update to handle prefix commands.
3531 (show_user_1): Add prefix and name arguments. Handle prefix
3533 * cli/cli-script.h (show_user_1): Update prototype.
3535 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
3537 * mingw-ser.c (console_select_thread): Add return to make
3539 (pipe_select_thread): Likewise.
3540 (file_select_thread): Likewise.
3542 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3544 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
3547 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3549 * remote.c (extended_remote_mourn_1): Invalidate our notion of
3550 current general thread.
3552 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3554 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
3555 without a live selected thread.
3557 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3559 Update the copyright notice of some of the files I missed
3560 in the previous copyright update.
3562 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3564 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
3565 base address instead of casting it to DWORD.
3567 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
3569 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
3570 for NULL frame pointers.
3572 2009-01-13 Mark Kettenis <kettenis@gnu.org>
3574 * utils.c (host_address_to_string): Reimplement in a way that
3575 avoids the cast of the address to long.
3577 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3579 * mdebugread.c (parse_symbol): Save the symbol private data
3580 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
3581 (psymtab_to_symtab_1): Likewise.
3582 (parse_procedure): Declare variable "e" only in the scope
3583 where it is used. Extract the symbol private data using
3586 2009-01-13 Jim Blandy <jimb@codesourcery.com>
3588 Abstract out common code for copying value locations.
3590 * value.h (set_value_component_location): New declaration.
3591 * value.c (set_value_component_location): New function.
3592 (value_primitive_field): Use it.
3593 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
3594 * valops.c (search_struct_field, value_slice): Same.
3595 * ada-lang.c (coerce_unspec_val_to_type)
3596 (ada_value_primitive_packed_val): Same.
3598 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3600 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
3602 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
3604 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
3606 * i386-cygwin-tdep.c: Ditto.
3607 * i386-windows-nat.c: Ditto.
3608 * windows-nat.h: Ditto.
3609 * windows-tdep.c: Ditto.
3610 * windows-tdep.h: Ditto.
3611 * windows-nat.c: Ditto.
3612 (cygwin_load_start): Redefine as CORE_ADDR.
3613 (cygwin_load_end): Ditto.
3614 (windows_make_so): Coerce result of address arithmetic to uintptr_t
3615 before coercing to CORE_ADDR to avoid a compiler warning.
3616 (handle_exception): Define addr as CORE_ADDR and coerce
3617 ExceptionAddress to uintptr_t before assigining to avoid a compiler
3619 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
3622 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3624 Fix linking with --enable-targets=all:
3625 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
3626 (HFILES_NO_SRCDIR): Add windows-tdep.h.
3627 (ALLDEPFILES): Add windows-tdep.c.
3629 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
3631 * win32-nat.h: Delete.
3632 * windows-nat.h: Rename from win32-nat.h.
3633 * win32-nat.c: Delete.
3634 * windows-nat.c: Rename from win32-nat.c.
3635 * win32-termcap.c: Delete.
3636 * windows-termcap.c: Rename from win32-termcap.c.
3637 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
3638 * configure.ac: Handle rename from win32-termcap.c ->
3640 * configure: Regenerate.
3641 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
3642 -> windows-termcap.c.
3643 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
3645 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
3646 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
3648 (win32_make_so): Handle cygwin compiler warning due to change of
3649 load_addr from DWORD to LPVOID.
3650 (handle_load_dll): Use %p in format string to properly print address
3651 and avoid a compiler warning.
3652 (DEBUG_EXCEPTION_SIMPLE): Ditto.
3653 (handle_exception): Ditto.
3654 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
3655 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
3657 * config/i386/mingw.mh: Ditto.
3658 * config/i386/mingw64.mh: Ditto.
3660 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3662 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
3663 arrayprint_recurse_level to a parameter. Update all the callers. New
3664 comment at autovariables.
3666 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3668 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
3671 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3673 * target.c (target_xfer_partial): Use host_address_to_string to
3674 print the address of readbuf and writebuf. Cast the address of
3675 elements inside the myaddr buffer into intptr_t.
3676 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
3677 Cast the address of elements inside the myaddr buffer into
3680 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3682 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
3683 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
3684 * configure.host, configure.tgt: Add handling for x86_64/windows.
3685 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
3686 and amd64-windows-tdep.c.
3688 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3690 * win32-tdep.h, win32-tdep.c: New files.
3691 * i386-cygwin-tdep.h: Delete.
3692 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
3694 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
3695 * win32-nat.c: Likewise.
3696 * configure.tgt: Add win32-tdep.o to the list of target object
3697 files for i386-cygwin and i386-mingw targets.
3699 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3701 * win32-nat.h: New file.
3702 * win32-nat.c (mappings): Initialize to NULL.
3703 (win32_set_context_register_offsets): New function.
3704 * i386-windows-nat.c: New file.
3705 (mappings): Moved here from win32-nat.c.
3706 (_initialize_i386_windows_nat): New function.
3707 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
3708 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
3710 2009-01-09 Andreas Schwab <schwab@suse.de>
3712 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
3714 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
3716 * gdbtypes.c (append_composite_type_field): Correct the location of
3719 2009-01-09 Pedro Alves <pedro@codesourcery.com>
3721 * defs.h (deprecated_error_hook): Delete declaration.
3722 * interps.c (clear_interpreter_hooks): Adjust.
3723 * remote-sim.c (gdb_os_error): Don't try to call
3724 deprecated_error_hook. No need to call exit anymore.
3725 * top.c (deprecated_error_hook): Delete.
3727 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3729 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
3730 to print the address of the gdbarch pointer.
3732 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3734 * gdbarch.sh: Fix all the compilation errors on amd64-windows
3735 due to casting a pointer to a long when printing a function
3736 address. Instead, use host_address_to_string to convert our
3737 address to a string.
3738 * gdbarch.c: Regenerate.
3740 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3742 * event-top.c (async_disconnect, async_stop_sig): use "raise"
3743 instead of "kill" to raise a signal.
3745 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3747 * win32-nat.c (get_module_name): Change the type of parameter
3748 "base_address" to LPVOID. Remove unnecessary cast.
3749 (struct lm_info): Change type of load_addr to LPVOID.
3750 (win32_make_so): Change the type of parameter "load_addr"
3751 to LPVOID. Remove some unnecessary casts.
3752 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
3753 (win32_xfer_shared_libraries): Add missing cast.
3755 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3757 * win32-nat.c (has_detach_ability, set_process_privilege):
3758 Cast the result of GetProcAddress to (void *) to avoid
3759 a compilation warning.
3761 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3763 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
3766 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3768 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
3769 definition of local variable "done".
3770 (info_w32_command, handle_exception): Remove unnecessary cast.
3772 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3774 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
3775 DebugSetProcessKillOnExit. Update all uses in this file.
3776 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
3777 Update all uses in this file.
3779 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3781 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
3782 and use it when pushing the target.
3783 (win32_attach, win32_create_inferior): Update call to
3784 do_initial_win32_stuff.
3785 (win32_detach, win32_mourn_inferior): Use our ops parameter
3786 instead of the global win32_ops to unpush the target.
3788 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3790 * ser-mingw.c (ser_windows_open): Use proper type when casting
3791 in call to _open_osfhandle.
3793 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
3795 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
3797 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3799 * CONTRIBUTE: Minor reformatting.
3801 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
3803 * MAINTAINERS: Add myself to Write After Approval.
3804 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
3807 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
3809 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
3810 Call exit to make it obvious to GCC.
3812 2009-01-08 Tom Tromey <tromey@redhat.com>
3814 PR breakpoints/9350:
3815 * varobj.c (varobj_invalidate): Unconditionally free
3817 * symfile.c (syms_from_objfile): Free local_addr when returning
3819 * exec.c (exec_file_attach): Do cleanups before returning.
3820 (exec_file_command): Likewise.
3821 * corefile.c (reopen_exec_file): Do cleanups before returning.
3822 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
3824 (do_vec_free): New function.
3825 (update_global_location_list): Make a cleanup for old_locations.
3826 Do cleanups before returning. Remove unused variable 'e'.
3827 (find_condition_and_thread): Free result of parsing the
3829 (print_it_typical): Do cleanups before returning.
3830 (breakpoint_re_set_one): Always free sals.sals.
3832 2009-01-08 Joel Brobecker <brobecker@adacore.com>
3833 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3835 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
3838 2009-01-07 Doug Evans <dje@google.com>
3840 * top.c (gdb_prompt_string): Delete, unused.
3842 2009-01-07 Pedro Alves <pedro@codesourcery.com>
3844 Delete ONE_PROCESS_WRITETEXT leftovers.
3846 * breakpoint.c (insert_bp_location): Delete process_warning
3848 (insert_breakpoint_locations): Adjust.
3849 (reattach_breakpoints): Adjust.
3850 * infrun.c (normal_stop): Drop "It might be running in another
3853 2009-01-07 Stan Shebs <stan@codesourcery.com>
3855 * config/pa/linux.mh (XDEPFILES): Remove.
3857 2009-01-07 Doug Evans <dje@google.com>
3859 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
3861 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
3863 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
3864 spacing, a regression from 2008-04-22.
3866 2009-01-07 Joel Brobecker <brobecker@adacore.com>
3868 * utils.c (gdb_print_host_address): Adjust implementation to
3869 reuse host_address_to_string. Move comment explaining the conversion
3870 from host address to string from here...
3871 (host_address_to_string): ... to there.
3873 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3875 * MAINTAINERS: Add myself for write after approval privileges.
3877 2009-01-06 Tom Tromey <tromey@redhat.com>
3879 * value.c (set_internalvar): Use value_free, not xfree.
3881 2009-01-06 Jim Blandy <jimb@red-bean.com>
3883 Check return values of functions declared with warn_unused_result
3884 attribute in GLIBC 2.8.
3885 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
3886 * inflow.c (check_syscall): New function.
3887 (new_tty): Use check_syscall to check return values from open and dup.
3888 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
3889 * main.c (captured_main): Call cwd after setting up gdb_stderr;
3890 check for errors from getcwd.
3891 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
3892 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
3893 (stdio_file_fputs): Same.
3894 * utils.c (internal_vproblem): abort if last-ditch error message
3897 * top.c (gdb_init): Don't set the current directory here; that's
3898 already been done in captured_main.
3900 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
3902 * ser-tcp.c: Adjust includes.
3903 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
3904 (tcp_auto_retry, tcp_retry_limit): Declare.
3905 (TIMEOUT): Remove, in favor of tcp_retry_limit.
3906 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
3907 (wait_for_connect): New function.
3908 (net_open): Use it. Add auto-retry logic.
3909 (set_tcp_cmd, show_tcp_cmd): New functions.
3910 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
3911 and "set/show tcp connect-timeout" commands.
3912 * NEWS: Document new commands.
3914 2009-01-05 Tom Tromey <tromey@redhat.com>
3916 * python/python-internal.h (Py_ssize_t): Define as int.
3918 2009-01-05 Jim Blandy <jimb@red-bean.com>
3920 * MAINTAINERS: Fix my e-mail address as steering committee member.
3922 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3924 Updated copyright notices for most files.
3926 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3928 * top.c (print_gdb_version): Update copyright year.
3930 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3932 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
3934 2009-01-01 Pedro Alves <pedro@codesourcery.com>
3936 PR breakpoints/9681:
3937 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
3938 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
3939 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
3940 retrow all other exceptions.
3942 For older changes see ChangeLog-2008.
3948 version-control: never