gdb/ChangeLog

   1 2008-03-03  Keith Seitz  <keiths@redhat.com>
   2
   3         From Dave Murphy  <davem@devkitpro.org>:
   4         * configure.ac: Set tcl configdir to win under mingw.
   5         * configure: Regenerate.
   6
   7 2008-03-03  Daniel Jacobowitz  <dan@codesourcery.com>
   8
   9         * breakpoint.c (fetch_watchpoint_value): New function.
  10         (update_watchpoint): Set and clear val_valid.  Use
  11         fetch_watchpoint_value.  Handle unreadable values on the
  12         value chain.  Correct check for user-requested array watchpoints.
  13         (breakpoint_init_inferior): Clear val_valid.
  14         (watchpoint_value_print): New function.
  15         (print_it_typical): Use it.  Do not free or clear old_val.  Print
  16         watchpoints even if old_val == NULL.
  17         (watchpoint_check): Use fetch_watchpoint_value.  Check for values
  18         becoming readable or unreadable.
  19         (watch_command_1): Use fetch_watchpoint_value.  Set val_valid.
  20         (do_enable_watchpoint): Likewise.
  21         * breakpoint.h (struct breakpoint): Update comment for val.  Add
  22         val_valid.
  23         * NEWS: Mention watchpoints on inaccessible memory.
  24
  25 2007-02-29  Daniel Jacobowitz  <dan@codesourcery.com>
  26
  27         * Makefile.in (i386-nat.o): Update.
  28         * amd64-linux-nat.c (_initialize_amd64_linux_nat): Call
  29         i386_use_watchpoints.
  30         * i386-linux-nat.c (_initialize_i386_linux_nat): Call
  31         i386_use_watchpoints.
  32         * i386-nat.c (i386_stopped_data_address): Take two arguments.
  33         (i386_stopped_by_watchpoint): Update call.
  34         (i386_can_use_hw_breakpoint, i386_use_watchpoints): New.
  35         * config/i386/nm-i386.h: Conditionalize definitions on
  36         ! I386_WATCHPOINTS_IN_TARGET_VECTOR.
  37         (i386_use_watchpoints): Declare.
  38         (i386_stopped_data_address): Update.
  39         * config/i386/nm-linux.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
  40         * config/i386/nm-linux64.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define.
  41
  42 2008-02-29  Joel Brobecker  <brobecker@adacore.com>
  43
  44         GDB 6.8 branch created (branch timestamp: 2008-02-26 10:00 UTC)
  45         * version.in: Bump version to 6.8.50.20080229-cvs.
  46
  47 2008-02-28  Markus Deuling  <deuling@de.ibm.com>
  48
  49         * f-typeprint.c (f_print_type): Handle NULL pointer in VARSTRING
  50         properly.
  51
  52 2008-02-28  Tom Tromey  <tromey@redhat.com>
  53
  54         * infcmd.c (notice_args_read): Print result of get_inferior_args.
  55
  56 2008-02-28  Daniel Jacobowitz  <dan@codesourcery.com>
  57
  58         * infcmd.c (kill_if_already_running): Make static.  Use
  59         target_require_runnable.
  60         * target.c (target_require_runnable): New.
  61         * target.h (target_require_runnable): Declare.
  62
  63 2008-02-28  Daniel Jacobowitz  <dan@codesourcery.com>
  64
  65         * frame.c (reinit_frame_cache): Only annotate if frames were
  66         previously valid.
  67
  68 2008-02-28  Ulrich Weigand  <uweigand@de.ibm.com>
  69
  70         * regformats/reg-ppc.dat: Rename "ps" to "msr".
  71         * regformats/reg-ppc64.dat: Likewise.
  72
  73 2008-02-28  Ulrich Weigand  <uweigand@de.ibm.com>
  74
  75         * features/Makefile (%.dat): Emit xmltarget statement.
  76
  77         * regformats/regdat.sh: Support xmltarget and xmlarch statments.
  78         Generate code to set gdbserver_xmltarget in init_registers_${name}.
  79
  80         * regformats/arm-with-iwmmxt.dat: Regenerate.
  81         * regformats/mips64-linux.dat: Regenerate.
  82         * regformats/mips-linux.dat: Regenerate.
  83         * regformats/rs6000/powerpc-32.dat: Regenerate.
  84         * regformats/rs6000/powerpc-64.dat: Regenerate.
  85         * regformats/rs6000/powerpc-e500.dat: Regenerate.
  86
  87         * regformats/reg-arm.dat: Add xmlarch statement.
  88         * regformats/reg-i386.dat: Likewise.
  89         * regformats/reg-i386-linux.dat: Likewise.
  90         * regformats/reg-x86-64-linux.dat: Likewise.
  91         * regformats/reg-spu.dat: Likewise.
  92
  93 2008-02-27  Daniel Jacobowitz  <dan@codesourcery.com>
  94
  95         * remote.c (remote_wait, remote_async_wait): Stop if we receive
  96         an error.
  97
  98 2008-02-27  Daniel Jacobowitz  <dan@codesourcery.com>
  99
 100         * utils.c (debug_timestamp): New.
 101         (vfprintf_unfiltered): Print timestamps if requested.
 102         (show_debug_timestamp): New.
 103         (initialize_utils): Register "set debug timestamp".
 104         * NEWS: Mention "set debug timestamp".  Add GDB 6.8 section.
 105
 106 2008-02-27  Joel Brobecker  <brobecker@adacore.com>
 107
 108         * breakpoint.c (skip_prologue_sal): New function.
 109         (resolve_sal_pc): Adjust SAL past prologue if the SAL was
 110         computed from a line number.
 111
 112 2008-02-27  Joel Brobecker  <brobecker@adacore.com>
 113
 114         * features/rs6000/power-core.xml, features/rs6000/power64-core.xml
 115         features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
 116         Set PC register type to "code_ptr".
 117         * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
 118         features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
 119         features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
 120         features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
 121         features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
 122         features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
 123         features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c:
 124         Regenerate.
 125
 126 2008-02-27  Ulrich Weigand  <uweigand@de.ibm.com>
 127
 128         * regformats/regdat.sh: Rename init_registers function in
 129         generated file to init_registers_${name}.
 130
 131         * regformats/reg-crisv32.dat: Set "name" to crisv32.
 132         * regformats/reg-ppc64.dat: Set "name" to ppc64.
 133         * regformats/reg-s390x.dat: Set "name" to s390x.
 134
 135 2008-02-26  Greg Law  <glaw@undo-software.com>
 136
 137         * regcache.c (registers_changed): Call reinit_frame_cache.
 138
 139 2008-02-26  Daniel Jacobowitz  <dan@codesourcery.com>
 140
 141         * configure.tgt (sh-*-linux*): Match sh*.  Add glibc-tdep.o.
 142         * sh-linux-tdep.c (sh_linux_init_abi): Use glibc_skip_solib_resolver
 143         and svr4_fetch_objfile_link_map.
 144         * Makefile.in (sh-linux-tdep.o): Update.
 145
 146 2008-02-26  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 147
 148         * amd64-tdep.c (amd64_classify): Add support for decimal float
 149         types.
 150         * i386-tdep.c (i386_return_value): Make 128-bit decimal float
 151         use the struct return convention.
 152
 153 2008-02-26  Nick Roberts  <nickrob@snap.net.nz>
 154
 155         * breakpoint.c (print_one_breakpoint_location): Revert Enb field
 156         to old format.  Discard breakpoint address if shared library is
 157         unloaded.
 158         (breakpoint_1): Adjust formatting of table header accordingly.
 159
 160 2008-02-25  Vladimir Prus  <vladimir@codesourcery.com>
 161
 162        * remote.c (remote_get_threadlist): If the response
 163        is empty, don't try to parse it.
 164
 165 2008-02-23  Vladimir Prus  <vladimir@codesourcery.com>
 166
 167         Unbreak 'target async'.
 168         * serial.c (serial_async): Set the
 169         handler function before enabling async
 170         mode.
 171
 172 2008-02-22  Daniel Jacobowitz  <dan@codesourcery.com>
 173
 174         * solib-svr4.c (enable_break): Convert r_brk to a code address.
 175
 176 2008-02-21  Pedro Alves  <pedro@codesourcery.com>
 177
 178         * remote.c (extended_remote_attach_1): Set attach_flag.
 179         (extended_remote_create_inferior_1): Clear attach_flag.
 180
 181 2008-02-20  Daniel Jacobowitz  <dan@codesourcery.com>
 182
 183         * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Set
 184         r_brk_offset.
 185         (mipsnbsd_lp64_fetch_link_map_offsets): Likewise.
 186         * solib-svr4.c (solib_svr4_r_brk): New.
 187         (open_symbol_file_object, svr4_current_sos): Always check the
 188         debug base.
 189         (svr4_fetch_objfile_link_map): Do not set debug_base.
 190         (enable_break): Use r_brk if it is set.
 191         (svr4_ilp32_fetch_link_map_offsets): Set r_brk_offset.
 192         (svr4_lp64_fetch_link_map_offsets): Likewise.
 193         * solib-svr4.h (struct link_map_offsets): Add r_brk_offset.
 194
 195 2008-02-20  Markus Deuling  <deuling@de.ibm.com>
 196             Mark Kettenis  <kettenis@gnu.org>
 197
 198         * alpha-tdep.c (alpha_heuristic_unwind_cache): Replace saved_regs by
 199         trad_frame_saved_reg.
 200         (trad-frame.h): New include.
 201
 202         (alpha_heuristic_frame_unwind_cache): Use trad_frame_alloc_saved_regs
 203         instead of frame_obstack_zalloc.
 204         (alpha_heuristic_frame_prev_register): Use trad_frame_get_prev_register.
 205
 206         * Makefile.in (alpha-tdep.o): Add dependency to trad_frame_h.
 207
 208 2008-02-20  Markus Deuling  <deuling@de.ibm.com>
 209
 210         * rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess
 211         from disassemble_info instead of gdbarch_byte_order.
 212
 213         * mips-tdep.c (gdb_print_insn_mips): Likewise.
 214         * arm-tdep.c (gdb_print_insn_arm): Likewise.
 215
 216 2008-02-20  Markus Deuling  <deuling@de.ibm.com>
 217
 218         * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add
 219         gdbarch as parameter.
 220
 221         * gdbarch.{c,h}: Regenerate.
 222
 223         * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as
 224         parameter.
 225         * mem-break.c (default_memory_insert_breakpoint)
 226         (default_memory_remove_breakpoint): Likewise.
 227         * target.h (default_memory_remove_breakpoint)
 228         (default_memory_insert_breakpoint): Likewise.
 229
 230         * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as
 231         parameter. Replace current_gdbarch by gdbarch.
 232         * m32r-tdep.c (m32r_memory_insert_breakpoint)
 233         (m32r_memory_remove_breakpoint): Likewise.
 234
 235 2008-02-19  Daniel Jacobowitz  <dan@codesourcery.com>
 236
 237         * MAINTAINERS: Add Vladimir Prus as MI maintainer.
 238
 239 2008-02-19  Joel Brobecker  <brobecker@adacore.com>
 240
 241         * NEWS: Add entry describing Add support improvements.
 242
 243 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
 244
 245         * m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by
 246         M68K_FP0_REGNUM.
 247
 248 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
 249
 250         * sentinel-frame.c (sentinel_frame_prev_register): Do not call
 251         register_offset_hack anymore.
 252
 253         * regcache.{c,h} (register_offset_hack): Remove.
 254
 255 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
 256
 257         * hppa-tdep.h (find_global_pointer): Add gdbarch as parameter.
 258
 259         * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace
 260         current_gdbarch by gdbarch.
 261         (hppa64_hpux_find_global_pointer): Likewise.
 262         * hppa-tdep.c (hppa_find_global_pointer): Likewise.
 263         (hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for
 264         find_global_pointer.
 265
 266         * hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as
 267         parameter.
 268         * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
 269
 270         * hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead
 271         of gdbarch_num_regs.
 272
 273         * hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and
 274         replace current_gdbarch by gdbarch.
 275         (hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr.
 276
 277 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
 278
 279         * rs6000-nat.c (exec_one_dummy_insn, regmap): Add gdbarch as parameter
 280         and replace current_gdbarch by gdbarch.
 281
 282         (store_register): Update call for exec_one_dummy_insn.
 283         (fetch_register, store_register): Update call of regmap.
 284
 285         * ppcnbsd-nat.c (getregs_supplies, getfpregs_supplies): Add gdbarch as
 286         parameter and replace current_gdbarch by gdbarch.
 287
 288         (ppcnbsd_store_inferior_registers): Use get_regcache_arch to get at
 289         the current architecture. Update call for getregs_supplies and
 290         getfpregs_supplies.
 291         (ppcnbsd_fetch_inferior_registers): Likewise.
 292
 293         * ppcobsd-nat.c (getfpregs_supplies): Add gdbarch as parameter and
 294         replace current_gdbarch by gdbarch.
 295         (ppcobsd_fetch_registers, ppcobsd_store_registers): Use
 296         get_regcache_arch to get at the current architecture. Update call for
 297         getfpregs_supplies.
 298
 299 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
 300
 301         * arch-utils.c (gdbarch_from_bfd): Remove unnecessary {old,new}_gdbarch
 302         variables.
 303
 304 2008-02-15  Markus Deuling  <deuling@de.ibm.com>
 305
 306         * mips-linux-tdep.c (mips_linux_init_abi): Remove internal error.
 307
 308 2008-02-14  Vladimir Prus  <vladimir@codesourcery.com>
 309
 310         * NEWS: Mention pending breakpints in MI.
 311
 312 2008-02-14  Markus Deuling  <deuling@de.ibm.com>
 313
 314         * Makefile.in (ALL_TARGET_OBS): Remove dependency to xtensa-linux-nat.o.
 315
 316 2008-02-13  Markus Deuling  <deuling@de.ibm.com>
 317
 318         Add script to build and test GDB using enable-targets=all.
 319
 320         * gdb_buildall.sh: New file.
 321
 322 2008-02-11  Maxim Grigoriev  <maxim2405@gmail.com>
 323
 324         * NEWS (New native configurations): Xtensa GNU/Linux.
 325         (New targets): Xtensa GNU/Linux.
 326         * Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
 327         xtensa-linux-tdep.o
 328         (ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
 329         (xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
 330         * configure.tgt (xtensa*-*-linux*): New entry.
 331         * xtensa-config.c (xtensa_tdep): New variable.
 332         (xtensa_config_byte_order, xtensa_config_tdep): Removed.
 333         (rmap): Change format based on new macro XTREG.
 334         (XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
 335         * xtensa-linux-nat.c: New.
 336         * xtensa-linux-tdep.c: New.
 337         * xtensa-xtregs.c: New.
 338         * xtensa-tdep.h (xtensa_elf_gregset_t): Update.
 339         (XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
 340         (XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
 341         (xtensa_register_t): New field coprocessor.
 342         (XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
 343         * xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
 344         (xtensa_pseudo_register_read, xtensa_pseudo_register_write):
 345         Update to handle privileged registers.
 346         (xtensa_supply_gregset) Remove exccause and excvaddr registers.
 347         (xtensa_push_dummy_call): Set windowstart register correctly.
 348         (call0_analyze_prologue): Initialize xtensa_default_isa.
 349         (xtensa_derive_tdep): New.
 350         (xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
 351         xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
 352         Call xtensa_derive_tdep().
 353         * config/xtensa/linux.mh: New.
 354         * regformats/reg-xtensa.dat: New.
 355
 356 2008-02-09  Aleksandar Ristovski  <aristovski@qnx.com>  (tiny change)
 357
 358         * corelow.c (core_open): Use IS_ABSOLUTE_PATH.
 359         (filenames.h): New include.
 360         * Makefile.in (corelow.o): Add dependency for filenames.h.
 361
 362 2008-02-08  Doug Evans  <dje@google.com>
 363
 364         * source.c (find_and_open_source): Always rewrite absolute filenames.
 365
 366 2008-02-07  Doug Evans  <dje@google.com>
 367
 368         * breakpoint.c: #include "hashtab.h".
 369         (ambiguous_names_p): New fn.
 370         (update_breakpoint_locations): When restoring bp enable status, don't
 371         compare function names if any functions have same name.
 372         * Makefile.in (breakpoint.o): Add hashtab.h dependency.
 373
 374 2008-02-07  Joel Brobecker  <brobecker@adacore.com>
 375
 376         * ada-lang.c (symbol_completion_add): Make SV parameter a VEC**
 377         instead of just a VEC*. Update use of SV.
 378         (ada_make_symbol_completion_list): Update symbol_completion_add calls.
 379
 380 2007-02-07  Joel Brobecker  <brobecker@adacore.com>
 381
 382         * NEWS: Put all new commands since gdb-6.7 together.
 383
 384 2007-02-07  Joel Brobecker  <brobecker@adacore.com>
 385
 386         * ada-lang.c: #include "vec.h".
 387         (struct string_vector, new_string_vector, string_vector_append):
 388         Delete.
 389         (char_ptr): New typedef.
 390         (DEF_VEC_P (char_ptr)): New VEC type.
 391         (symbol_completion_add): Update profile to take the new VEC type
 392         instead of the old string_vector structure. Update code accordingly.
 393         (ada_make_symbol_completion_list): Use the new VEC type instead of
 394         the old string_vector structure, and update the code accordingly.
 395         * Makefile.in (ada-lang.o): Add dependency on vec.h.
 396
 397 2008-02-06  Pierre Muller  <muller@ics.u-strasbg.fr>
 398
 399         * p-exp.y: Set current_type in missing places.
 400         (leftdiv_is_integer): New static variable.
 401         Typecast right operand of BINOP_DIV to long_double if both operands
 402         are integers.
 403
 404 2008-02-06  Maciej W. Rozycki  <macro@mips.com>
 405
 406         * remote-mips.c (set_breakpoint): Rename to...
 407         (mips_set_breakpoint): ... this.
 408         (clear_breakpoint): Rename to...
 409         (mips_clear_breakpoint): ... this.
 410         (common_breakpoint): Rename to...
 411         (mips_common_breakpoint): ... this.
 412         (check_lsi_error): Rename to...
 413         (mips_check_lsi_error): ... this.
 414
 415 2007-02-05  Joel Brobecker  <brobecker@adacore.com>
 416
 417         * language.h (struct language_defn): Add new field
 418         la_make_symbol_completion_list.
 419         * symtab.c (default_make_symbol_completion_list): Renames
 420         make_symbol_completion_list.
 421         (make_symbol_completion_list): New function.
 422         * symtab.h (default_make_symbol_completion_list): Add declaration.
 423         * langauge.c (unknown_language): Set la_make_symbol_completion_list.
 424         (auto_language, local_language): Likewise.
 425         * objc-lang.c (objc_language_defn): Likewise.
 426         * scm-lang.c (scm_language_defn): Likewise.
 427         * m2-lang.c (m2_language_defn): Likewise.
 428         * f-lang.c (f_language_defn): Likewise.
 429         * jv-lang.c (java_language_defn): Likewise.
 430         * p-lang.c (pascal_language_defn): Likewise.
 431         * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn)
 432         (minimal_language_defn): Likewise.
 433         * ada-lang.c (struct string_vector): New structure.
 434         (new_string_vector, string_vector_append, ada_unqualified_name)
 435         (add_angle_brackets, symbol_completion_match, symbol_completion_add)
 436         (ada_make_symbol_completion_list): New functions.
 437         (ada_language_defn): Set la_make_symbol_completion_list.
 438         * ada-lang.h (ada_make_symbol_completion_list): Remove declaration,
 439         this function is static.
 440
 441 2008-02-05  Kevin Buettner  <kevinb@redhat.com>
 442
 443         * mn10300-tdep.c (mn10300_push_dummy_call): Adjust stack pointer
 444         to account for call site optimizations.
 445
 446 2008-02-05  Andrzej Zaborowski  <balrogg@gmail.com>
 447
 448         * tracepoint.c (read_actions): Handle end-of-text indicator
 449         in action list properly.  (Committed by Jim Blandy)
 450
 451 2008-02-05  Jim Blandy  <jimb@red-bean.com>
 452
 453         * ax-gdb.c (gen_expr): Yield ordinary error if asked to trace a
 454         pseudoregister, not an internal error.
 455         Reported by: Andrzej Zaborowski
 456
 457 2008-02-04  Vladimir Prus  <vladimir@codesourcery.com>
 458
 459         * varobj.c (c_value_of_variable): Use xstrdup.
 460
 461 2008-02-04  Vladimir Prus  <vladimir@codesourcery.com>
 462
 463         Update stored rendition of varobj value when format changes.
 464         * varobj.c (varobj_set_display_format): Recomputed
 465         print_value.
 466         (c_value_of_variable): Return print_value.
 467
 468 2008-02-03  Doug Evans  <dje@google.com>
 469
 470         * eval.c (evaluate_subexp_standard): Fix type of result of mixed
 471         integer/float division operations when EVAL_AVOID_SIDE_EFFECTS.
 472         * valops.c (value_one): New function.
 473         * value.h (value_one): Declare.
 474
 475         Fix argument promotion for binary arithmetic ops for C.
 476         * valarith.c (unop_result_type): New fn.
 477         (binop_result_type): New fn.
 478         (value_binop): Move result type computation to binop_result_type.
 479         (value_pos, value_neg, value_complement): Move result type
 480         computation to unop_result_type.
 481
 482         PR 2384
 483         * gdbtypes.c (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
 484         Return basetype, fieldno if found.  All callers updated.
 485         Don't cache TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE if from different
 486         objfile.
 487         * gdbtypes.h (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
 488         * symfile.h (fill_in_vptr_fieldno): Delete.
 489
 490 2008-02-02  Doug Evans  <dje@google.com>
 491
 492         * valarith.c (value_binop): Handle unsigned BINOP_REM division by zero.
 493
 494         * typeprint.c (*): Whitespace cleanup.
 495
 496 2008-02-02  Mark Kettenis  <kettenis@gnu.org>
 497             Luis Machado  <luisgpm@br.ibm.com>
 498             Thiago Jung Bauermann  <bauerman@br.ibm.com>
 499
 500         * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Pass floats that
 501         don't fit into registerson the stack the way GCC does.
 502
 503 2008-02-01  Joel Brobecker  <brobecker@adacore.com>
 504
 505         * symtab.c (symbol_set_names): Do not add an entry in the demangling
 506         hash table for Ada symbols. Just store the linkage name as is,
 507         and leave the demangled_name as NULL.
 508
 509 2007-02-01  Joel Brobecker  <brobecker@adacore.com>
 510
 511         * dwarf2read.c (add_partial_symbol): Always store all Ada subprograms
 512         in the global scope.
 513         (new_symbol): Likewise.
 514
 515 2008-02-01  Vladimir Prus  <vladimir@codesourcery.com>
 516
 517         * breakpoint.c (break_command_1): Return void.
 518         (break_command_really): Return void.  Rethrow
 519         exceptions instead of returning.
 520         (gdb_breakpoint): Remove the error_message parameter.
 521         Return void.  Rename to set_breakpoint.
 522         * gdb.h (gdb_breakpoint): Rename and move to...
 523         * breakpoint.h (set_breakpoint): ...here.
 524         * mi/mi-cmb-break.c (mi_cmd_break_insert): Restore
 525         event hooks even if exception is thrown.  Adjust to
 526         gdb_breakpoint interface changes.
 527
 528
 529 2008-02-01  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 530
 531         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Write 32-bit
 532         float in both first and second word in the doubleword, to support
 533         old and new ABIs.
 534
 535 2008-02-01  Vladimir Prus  <vladimir@codesourcery.com>
 536
 537         Properly rethrow exception.  This fixes errors
 538         about non-existent functions for -break-insert.
 539         * breakpoint.c (break_command_really): Use throw_exception
 540         for rethrowing.  If rethrowing, don't print the exception.
 541
 542 2008-01-31  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 543
 544         * NEWS: Mention Decimal Floating Point support.
 545
 546 2008-01-31  Joel Brobecker  <brobecker@adacore.com>
 547
 548         * std-regs.c (value_of_builtin_frame_pc_reg): Change the returned
 549         value type to builtin_type_void_func_ptr.
 550
 551 2008-01-31  Andreas Krebbel  <krebbel1@de.ibm.com>
 552
 553         * s390-tdep.c (is_float_singleton, is_float_like,
 554         alignment_of, s390_return_value): Make checks for
 555         TYPE_CODE_FLT to match TYPE_CODE_DECFLOAT as well.
 556
 557 2008-01-31  Luis Machado  <luisgpm@br.ibm.com>
 558             Thiago Jung Bauermann  <bauerman@br.ibm.com>
 559
 560         * infcmd.c (default_print_registers_info): Also print hex
 561         raw contents for TYPE_CODE_DECFLOAT registers.
 562         * ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member.
 563         * rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro.
 564         (rs6000_register_name): Add support for DFP pseudo-registers.
 565         (rs6000_pseudo_register_type): Likewise.
 566         rs6000_pseudo_register_reggroup_p): Likewise.
 567         (ppc_pseudo_register_read): New function.
 568         (ppc_pseudo_register_write): Likewise.
 569         (rs6000_pseudo_register_read): Likewise.
 570         (rs6000_pseudo_register_write): Likewise.
 571         (e500_pseudo_register_read): Move checks to
 572         rs6000_pseudo_register_read.
 573         (e500_pseudo_register_write): Move checks to
 574         rs6000_pseudo_register_write.
 575         (rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum.  Install
 576         rs6000_pseudo_register_read and rs6000_pseudo_register_write
 577         in gdbarch if SPE or DFP is available.  Adjust gdbarch's
 578         num_pseudo_regs to account for DFP pseudo regs.
 579
 580 2008-01-31  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 581
 582         * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_ev31_regnum member.
 583         * rs6000-tdep.c (IS_SPE_PSEUDOREG): New macro.
 584         (spe_register_p, rs6000_register_name, rs6000_pseudo_register_type,
 585         rs6000_pseudo_register_reggroup_p, e500_move_ev_register,
 586         e500_pseudo_register_read, e500_pseudo_register_write): Use
 587         IS_SPE_PSEUDOREG macro.
 588         (rs6000_frame_cache): Remove use of tdep->ppc_ev31_regnum.
 589         (rs6000_gdbarch_init): Remove unnecessary num_sprs local variable.
 590         Remove initialization of tdep->ppc_ev31_regnum.
 591
 592 2008-01-08  Paul Hilfinger  <hilfinger@adacore.com>
 593
 594         * printcmd.c (print_formatted): Handle references as for unformatted
 595         prints.
 596
 597 2008-01-30  Joel Brobecker  <brobecker@adacore.com>
 598
 599         * eval.c (evaluate_subexp_standard): Add handling of user
 600         registers when in EVAL_AVOID_SIDE_EFFECTS mode.
 601
 602 2008-01-30  Pierre Muller  <muller@ics.u-strasbg.fr>
 603
 604         * eval.c (evaluate_subexp_standard): Support
 605         BINOP_INTDIV opcode.
 606
 607 2008-01-30  Paul N. Hilfinger  <hilfinger@adacore.com>
 608
 609         * valarith.c (value_binop): Add floating-point BINOP_MIN and
 610         BINOP_MAX cases.
 611         For BINOP_EXP, use length and signedness of left operand only for
 612         result, as for shifts.
 613         For integral operands to BINOP_EXP, use new integer_pow and
 614         uinteger_pow functions so as to get full range of results.
 615         (integer_pow): New function.
 616         (uinteger_pow): New function.
 617
 618 2008-01-30  Vladimir Prus  <vladimir@codesourcery.com>
 619
 620         Use vector for varobj_list_children interface.
 621         * gdb/varobj.c (varobj_list_children): Return vector
 622         of varobjs.
 623         * gdb/varobj.h (varobj_list_children): Adjust
 624         prototype.
 625         (varobj_p): Declare.  Declare vector thereof.
 626         * mi/mi-cmd-var.c (mi_cmd_var_list_children): Adjust
 627         for varobj_list_children change.
 628         * Makefile.in (varobj_h): Update dependencies.
 629
 630 2008-01-30  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 631
 632         * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Add support for
 633         TYPE_CODE_DECFLOAT arguments.
 634         (ppc64_sysv_abi_push_dummy_call) Likewise.
 635         (get_decimal_float_return_value): New function.
 636         (do_ppc_sysv_return_value): Add support for TYPE_CODE_DECFLOAT return
 637         values by calling get_decimal_float_return_value.
 638         (ppc64_sysv_abi_return_value): Likewise.
 639
 640 2008-01-30  Nick Roberts  <nickrob@snap.net.nz>
 641
 642         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file):  Add field
 643         for preprocessor macro information.  Formatting changes.
 644
 645 2008-01-29  Daniel Jacobowitz  <dan@codesourcery.com>
 646
 647         * remote.c (struct remote_state): Add cached_wait_status.
 648         (remote_exec_file): New variable.
 649         (PACKET_vAttach, PACKET_vRun): New constants.
 650         (extended_remote_restart): Do not query for status.
 651         (struct start_remote_args): New.
 652         (remote_start_remote): Take it as a second argument.  Check
 653         whether the target is running.  Issue an error for non-running
 654         non-extended targets.  Cache the wait status.  Set inferior_ptid
 655         here.
 656         (remote_open_1): Prompt to disconnect non-running targets.  Make
 657         sure the target is marked running.  Do not set inferior_ptid here.
 658         Update call to remote_start_remote.  Do not call remote_check_symbols
 659         if the target is not running.
 660         (remote_detach_1): Rename from remote_detach.  Take an EXTENDED
 661         argument.  Handle a non-running target.
 662         (remote_detach): Use it.
 663         (extended_remote_detach): New.
 664         (remote_disconnect): Fix typo.  Use remoute_mourn_1.
 665         (extended_remote_attach_1, extended_remote_attach)
 666         (extended_async_remote_attach): New.
 667         (remote_vcont_resume): Remove unused variable.
 668         (remote_wait, remote_async_wait): Use any cached wait status.
 669         (putpkt_binary, getpkt): Clear any cached wait status.
 670         (extended_remoute_mourn_1): New.
 671         (extended_remote_mourn): Use it.
 672         (extended_async_remote_mourn, extended_remote_run): New.
 673         (extended_remote_create_inferior_1): New.
 674         (extended_remote_create_inferior): Use it.
 675         (extended_remote_async_create_inferior): Likewise.
 676         (remote_xfer_partial): Skip for non-executing targets.
 677         (init_extended_remote_ops): Set to_detach and to_attach.
 678         (init_extended_async_remote_ops): Likewise.  Use
 679         extended_async_remote_mourn.
 680         (_initialize_remote): Register vAttach, vRun, and
 681         set remote exec-file.
 682         * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
 683
 684 2008-01-29  Daniel Jacobowitz  <dan@codesourcery.com>
 685
 686         * Makefile.in (symfile.o): Update.
 687         * NEWS: Mention exec tracing support.
 688         * inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
 689         exec events.
 690         * infcmd.c (kill_if_already_running, detach_command)
 691         (disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
 692         * infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
 693         (follow_exec): Do not check may_follow_exec.  Do not mourn and push
 694         targets.  Apply the sysroot path to the loaded executable.  Use
 695         no_shared_libraries.
 696         * linux-nat.c (linux_child_follow_fork): Print fork following
 697         messages if verbose.
 698         (kill_wait_callback): Kill again before waiting a second time.
 699         * symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
 700         no_shared_libraries.
 701
 702 2008-01-29  Joel Brobecker  <brobecker@adacore.com>
 703
 704         * amd64-tdep.c (amd64_classify): Add handling of TYPE_CODE_CHAR.
 705
 706 2008-01-29  Joel Brobecker  <brobecker@adacore.com>
 707
 708         * nto-tdep.h: Remove #include "defs.h".
 709         * nto-tdep.c: Add #include "defs.h".
 710         * Makefile.in (nto_tdep_h): Update dependencies.
 711         (nto-tdep.o): Likewise.
 712
 713 2008-01-29  Joel Brobecker  <brobecker@adacore.com>
 714
 715         * infrun.c (wait_for_inferior): Add treat_exec_as_sigtrap parameter
 716         and use it.
 717         (proceed, start_remote): Update call to wait_for_inferior.
 718         * inferior.h (wait_for_inferior): Update declaration.
 719         * fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c,
 720         solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior.
 721         * inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as
 722         TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED.
 723
 724 2008-01-29  Aleksandar Ristovski  <aristovski@qnx.com>
 725
 726         * varobj (adjust_value_for_child_access): Added checking for
 727         returned value from gdb_value_ind.
 728         (c_describe_child): Likewise.
 729         (cplus_describe_child): Fixed a typo.
 730
 731 2008-01-29  Jim Blandy  <jimb@red-bean.com>
 732
 733         * MAINTAINERS: Update my info.
 734
 735 2008-01-29  Vladimir Prus  <vladimir@codesourcery.com>
 736
 737         Use multiple locations for hardware watchpoints.
 738         This eliminates the need to traverse value chain, doing
 739         various checks, in three different places.
 740
 741         * breakpoint.h (struct bp_location): New fields
 742         lengths and watchpoint_type.
 743         (struct breakpoint): Remove the val_chain field.
 744         * breakpoint.c (is_hardware_watchpoint): New.
 745         (free_valchain): Remove.
 746         (update_watchpoint): New.
 747         (insert_bp_location): For hardware watchpoint, just
 748         directly insert it.
 749         (insert_breakpoints): Call update_watchpoint_locations
 750         on all watchpoints.  If we have failed to insert
 751         any location of a hardware watchpoint, remove all inserted
 752         locations.
 753         (remove_breakpoint): For hardware watchpoints, directly
 754         remove location.
 755         (watchpoints_triggered): Iterate over locations.
 756         (bpstat_stop_status): Use only first location of
 757         a resource watchpoint.
 758         (delete_breakpoint): Don't call free_valchain.
 759         (print_one_breakpoint): Don't print all
 760         locations for watchpoints.
 761         (breakpoint_re_set_one): Use update_watchpoint for
 762         watchpoints.
 763
 764 2008-01-29  Vladimir Prus  <vladimir@codesourcery.com>
 765
 766         Don't reset watchpoint block on solib load.
 767
 768         * breakpoint.c (insert_bp_location): For watchpoints,
 769         recompute condition.
 770         (breakpoint_re_set_one): Instead of recomputing value
 771         and condition for watchpoints, just reset value and
 772         let insert_breakpoints/insert_bp_location recompute it.
 773         Don't do anything about disabled watchpoint.
 774
 775 2008-01-29  Pierre Muller  <muller@ics.u-strasbg.fr>
 776
 777         * valarith.c (value_binop): Handle unsigned integer
 778         division by zero.
 779
 780 2008-01-28  Kevin Buettner  <kevinb@redhat.com>
 781
 782         * mn10300-tdep.c (mn10300_analyze_prologue): Check for an
 783         instruction pattern that appears frequently in position
 784         independent code.  Fix bug in code which looks for "fmov" and
 785         backtracks if no "fmov" is found.
 786
 787 2008-01-28  Doug Evans  <dje@google.com>
 788
 789         * dbxread.c (read_dbx_symtab): Fix indentation.
 790         Reformat comments to 80 columns.
 791         Move local var def closer to only use.
 792
 793 2008-01-28  Daniel Jacobowitz  <dan@codesourcery.com>
 794
 795         * fork-child.c (SHELL_FILE): Remove #ifndef.
 796         (fork_inferior): Remove SHELL_COMMAND_CONCAT.
 797
 798 2008-01-25  Pierre Muller  <muller@ics.u-strasbg.fr>
 799
 800         * i386-tdep.c (i386_skip_noop): New function.
 801         (i386_analyze_prologue): Call i386_skip_noop function.
 802
 803 2008-01-24  Michael Snyder  <msnyder@specifix.com>
 804
 805         * procfs.c (procfs_xfer_partial): Comment, cut/paste error.
 806         * win32-nat.c (win32_xfer_partial): Ditto.
 807         * target.c (default_xfer_partial): Minor whitespace adjustment.
 808
 809 2008-01-24  Pedro Alves  <pedro@codesourcery.com>
 810
 811         * arm-tdep.c (arm_addr_bits_remove): In non 26-bit mode, don't
 812         strip bit 1 even if pc doesn't point to thumb code.
 813
 814 2008-01-23  Daniel Jacobowitz  <dan@codesourcery.com>
 815
 816         * remote.c (remote_wait): Handle SIGINT between packets.
 817         (remote_async_wait): Likewise.
 818
 819 2008-01-23  Vladimir Prus  <vladimir@codesourcery.com>
 820             Chris Demetriou  <cgd@google.com>
 821
 822         * thread.c (add_thread_silent): Renamed
 823         from add_thread.
 824         (print_thread_events): New variable definition.
 825         (show_print_thread_events): New function.
 826         (_initialize_thread): Add "set print thread-events" and
 827         "show print thread-events" commands.
 828         (add_thread): Announce new thread.
 829         * gdbthread.h (add_thread_silent): Declare.
 830         (print_thread_events): New variable declaration.
 831         * inf-ttrace.c (inf_ttrace_wait): Don't
 832         inform about new thread, as add_thread is always
 833         called too, and will take care of that.
 834         * infrun.c (handle_inferior_event): Likewise.
 835         * procfs.c (procfs_wait): Likewise.
 836         * remote.c (remote_currthread): Likewise.
 837         * sol-thread.c (sol_thread_wait): Likewise.
 838         * win32-nat.c (get_win32_debug_event): Likewise.
 839         * linux-thread-db.c (attach_thread): Likewise.
 840         Remove the verbose parameter.
 841         (check_event): Make detach_thread be verbose
 842         only if print_thread_events is set.
 843         * linux-nat.c (lin_lwp_attach_lwp): Don't inform
 844         about new thread.  This is called only from
 845         linux-thread-db.c:attach_thread, which will take care.
 846         Remove the verbose parameter.
 847         * linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
 848
 849 2008-01-23  Nick Roberts  <nickrob@snap.net.nz>
 850
 851         * mi/mi-cmd-var.c (mi_cmd_var_set_format): Add value field to output.
 852
 853 2008-01-22  Vladimir Prus  <vladimir@codesourcery.com>
 854
 855         * breakpoint.c (break_command_really): New parameter
 856         ignore_count.
 857         (break_command_1): Pass 0 as
 858         ignore_count to break_command_really.
 859         (gdb_breakpoint): Pass ignore_count to
 860         break_command_really.
 861
 862 2008-01-21  Kevin Buettner  <kevinb@redhat.com>
 863
 864         * mn10300-linux-tdep.c (am33_linux_sigframe_cache_init): Find
 865         sigcontext struct via pointer.
 866         (struct sigframe comment): Update to show new field `psc'.
 867
 868 2008-01-21  Vladimir Prus  <vladimir@codesourcery.com>
 869
 870         * infrun.c (handle_inferior_event): If
 871         we failed to remove breakpoints, error,
 872         don't try to increment PC by hand.
 873
 874 2008-01-18  Nick Hudson  <nick.hudson@dsl.pipex.com>
 875
 876         Add NetBSD/hppa target and host support.
 877
 878         * hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
 879         (hppabsd_gregset): Move to ...
 880         (hppabsd_regset_from_core_section): Rename
 881         hppaobsd_regset_from_core_section and move to ...
 882         (hppabsd_find_global_pointer): Update comment.
 883         (hppabsd_init_abi): Make global. Do not register
 884         hppabsd_regset_from_core_section.
 885         (hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
 886         move to ...
 887         (_initialize_hppabsd_tdep): Move to ...
 888         * hppaobsd-tdep.c: ... here. New file.
 889         * hppnbsd-tdep.c: New file.
 890         * hppnbsd-nat.c: New file.
 891         * Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
 892         (ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
 893         (hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
 894         (hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
 895         * configure.host (hppa*-*-netbsd*): New entry.
 896         * configure.tgt (hppa*-*-netbsd*): New entry.
 897         (hppa*-*-openbsd*): Update.
 898         * NEWS (New native configuration): Mention NetBSD/hppa.
 899         (New targets): Mention NetBSD/hppa.
 900
 901 2008-01-18  Markus Deuling  <deuling@de.ibm.com>
 902
 903         * gdbarch.sh (function_list): Add new property bits_big_endian to
 904         gdbarch structure.
 905         * gdbarch.{c,h}: Regenerate.
 906
 907         * value.c (struct value): Replace BITS_BIG_ENDIAN by
 908         gdbarch_bits_big_endian (comment).
 909         (unpack_field_as_long, modify_field): Likewise.
 910         * value.h: Likewise (comment).
 911         * valops.c (value_slice): Likewise.
 912         * valarith.c (value_subscript, value_bit_index): Likewise.
 913         * gdbtypes.h (field): Likewise (comment).
 914         * eval.c (evaluate_subexp_standard): Likewise.
 915         * dwarf2read.c (dwarf2_add_field): Likewise.
 916         * ada-lang.c (decode_packed_array, ada_value_primitive_packed_val)
 917         (move_bits, ada_value_assign, value_assign_to_component): Likewise.
 918
 919         * defs.h (BITS_BIG_ENDIAN): Remove.
 920
 921 2008-01-18  Markus Deuling  <deuling@de.ibm.com>
 922
 923         * jv-exp.y (yylex): Replace DEPRECATED_STREQN with the appropriate
 924         function calls.
 925         * m2-exp.y (yylex): Likewise.
 926         * objc-exp.y (yylex): Likewise.
 927
 928         * defs.h (DEPRECATED_STREQN): Remove.
 929
 930 2008-01-17  H.J. Lu  <hjl.tools@gmail.com>
 931
 932         * MAINTAINERS: Update my email address.
 933
 934 2008-01-17  Jim Blandy  <jimb@codesourcery.com>
 935
 936         * README: Mention gdbserver/README.
 937
 938 2008-01-17  Pierre Muller  <muller@ics.u-strasbg.fr>
 939
 940         * valarith.c (value_binop): Handle BINOP_INTDIV
 941         for unsigned and signed integers.
 942
 943 2008-01-17  Ulrich Weigand  <uweigand@de.ibm.com>
 944
 945         * s390-tdep.c (s390_gdbarch_init): Set default long double
 946         type to 128-bit IEEE quad.
 947
 948 2008-01-17  Joel Brobecker  <brobecker@adacore.com>
 949
 950         * hpux-thread.c (hpux_thread_resume): Delete commented-out code.
 951
 952 2008-01-16  Mark Kettenis  <kettenis@gnu.org>
 953
 954         * auxv.c (fprint_target_auxv): Add support for AT_SUN_AUXFLAGS.
 955
 956         * dfp.c, dfp.h: Rename decimal_to_double to decimal_to_doublest.
 957         * value.c: All callers changed.
 958
 959 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
 960
 961         * rs6000-nat.c (add_vmap, vmap_ldinfo, vmap_exec): Replace
 962         DEPRECATED_STREQ by its expression.
 963         * coffread.c (coff_locate_sections, coff_symtab_read): Likewise.
 964         * xcoffread.c (read_xcoff_symtab, read_symbol_lineno, find_linenos)
 965         (scan_xcoff_symtab): Likewise.
 966         * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Likewise.
 967         * f-lang.c (find_common_for_function): Likewise.
 968         * objc-exp.y (parse_number): Likewise.
 969
 970         * defs.h (DEPRECATED_STREQ): Remove.
 971
 972 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
 973
 974         * mn10300-tdep.h (AM33_MODE): Add gdbarch as parameter.
 975         * mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use
 976         get_frame_arch to get at the current_architecture. Update AM33_MODE
 977         call.
 978         (mn10300_analyze_prologue): Add gdbarch as parameter. Update caller.
 979         (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
 980         architecture.
 981         (set_reg_offsets, mn10300_analyze_prologue): Fix indentation.
 982
 983 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
 984
 985         * amd64-nat.h (amd64_native_gregset_supplies_p): Add gdbarch as
 986         parameter.
 987         * amd64-nat.c (amd64_native_gregset_supplies_p): Likewise.
 988
 989         (amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace
 990         current_gdbarch by gdbarch. Update caller.
 991
 992         * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers)
 993         (amd64_linux_store_inferior_registers): Use get_regcache_arch to get at
 994         the current architecture. Update calls of
 995         amd64_native_gregset_supplies_p.
 996         * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers)
 997         (amd64bsd_store_inferior_registers): Likewise.
 998
 999 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
1000
1001         * ppc-linux-nat.c (ppc_register_u_addr): Add gdbarch as parameter.
1002         Replace current_gdbarch by gdbarch. Update caller.
1003
1004 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
1005
1006         * dbxread.c (repeated_header_complaint, dbx_symfile_init)
1007         (read_dbx_dynamic_symtab, function_outside_compilation_unit_complaint)
1008         (read_dbx_symtab, end_psymtab, dbx_psymtab_to_symtab_1)
1009         (dbx_psymtab_to_symtab, read_ofile_symtab, process_one_symbol)
1010         (stabsect_build_psymtabs): Fix indentation.
1011
1012 2008-01-15  Michael Snyder  <msnyder@specifix.com>
1013
1014         * corelow.c (core_xfer_partial): Comment, cut/paste error.
1015
1016 2008-01-14  Pierre Muller  <muller@ics.u-strasbg.fr>
1017
1018         * win32-nat.c (win32_create_inferior): Restore code calling
1019         CloseHandle on ProcessInformation structure.
1020
1021 2008-01-13  Nick Hudson  <nick.hudson@dsl.pipex.com>
1022
1023         * configure.ac: Check for void * as 3 argument of ptrace.
1024         * configure: regenerate.
1025
1026 2008-01-11  Markus Deuling  <deuling@de.ibm.com>
1027
1028         * alpha-tdep.c (alpha_heuristic_proc_start)
1029         (alpha_sigtramp_register_address): Add gdbarch as parameter. Replace
1030         current_gdbarch by gdbarch.
1031
1032         (alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the
1033         current architecture by frame_info. Update alpha_heuristic_proc_start
1034         call.
1035
1036         (alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use
1037         get_frame_arch to get at the current architecture by frame_info. Update
1038         alpha_sigtramp_register_address call.
1039
1040         * arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace
1041         current_gdbarch by gdbarch. Update caller.
1042         (convert_to_extended, convert_from_extended): Add endianess parameter
1043         for comparison. Update caller.
1044         (arm_extract_return_value, arm_store_return_value): Use
1045         get_regcache_arch to get at the current architecture.
1046
1047         * cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace
1048         current_gdbarch by gdbarch. Update caller.
1049         (cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add
1050         gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch.
1051
1052         * h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add
1053         gdbarch as parameter. Update caller.
1054         (h8300_init_frame_cache): Add gdbarch as parameter. Replace
1055         current_gdbarch by gdbarch. Update caller.
1056
1057         * hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and
1058         update caller. Replace current_gdbarch by gdbarch.
1059
1060         * m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at
1061         the current architecture. Replace current_gdbarch by gdbarch.
1062         * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
1063         (STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its
1064         expression. Add gdbarch as parameter and replace current_gdbarch with
1065         it. Update caller.
1066         (M6811_TDEP): Remove.
1067         (m68hc11_frame_prev_register): Use get_frame_arch to get at the current
1068         architecture.
1069         (m68hc11_scan_prologue): Add gdbarch as parameter. Replace
1070         current_gdbarch by gdbarch. Update caller.
1071
1072         * m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and
1073         update caller.
1074         (m68k_analyze_register_saves): Likewise. Also replace current_gdbarch
1075         by gdbarch.
1076
1077         * rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update
1078         caller. Relace current_gdbarch by gdbarch.
1079         (altivec_register_p, spe_register_p): Likewise.
1080         * ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as
1081         parameter.
1082         * ppc-linux-nat.c (fetch_register, store_register): Update caller of
1083         altivec_register_p and spe_register_p.
1084
1085         * score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update
1086         caller. Replace current_gdbarch by gdbarch.
1087         (score_analyze_prologue): use get_frame_arch to get at the current
1088         architecture.
1089
1090         * sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter.
1091         * sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace
1092         current_gdbarch by gdbarch. Update caller.
1093         (sparc_frame_cache): Use get_frame_arch to get at the current
1094         architecture.
1095         * sparce64-tdep.c (sparc64_skip_prologue): Update call of
1096         sparc_analyze_prologue.
1097
1098         * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as
1099         parameter.
1100
1101 2008-01-11  Markus Deuling  <deuling@de.ibm.com>
1102
1103         * exec.c: #include "arch-utils.h"
1104          (print_section_info): Use gdbarch_from_bfd to get at the
1105         current architecture. Replace current_gdbarch. Fix indention. Replace
1106         deprecated_print_address_numeric by paddress.
1107         * Makefile.in (exec.o) Add dependency to arch-utils.h.
1108
1109         * valprint.c (val_print_string): Replace
1110         deprecated_print_address_numeric.
1111         * tracepoint.c (trace_mention, scope_info): Likewise.
1112         * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol)
1113         (print_symbol, print_partial_symbols, maintenance_info_psymtabs)
1114         (maintenance_check_symtabs): Likewise.
1115         * symfile.c (list_overlays_command): Likewise.
1116         * stack.c (frame_info, print_block_frame_labels): Likewise.
1117         * printcmd.c (print_address, print_address_demangle)
1118         (address_info): Likewise.
1119         * corefile.c (memory_error): Likewise.
1120         * infcmd.c (jump_command): Likewise.
1121         * breakpoint.c (insert_bp_location, describe_other_breakpoints)
1122         (mention, delete_breakpoint): Likewise.
1123         * c-valprint.c (print_function_pointer_address, c_val_print): Likewise.
1124         * dwarf2read.c (dump_die): Likewise.
1125         * ada-valprint.c (ada_val_print_1): Likewise.
1126         * f-valprint.c (f_val_print): Likewise.
1127         * linux-fork.c (info_forks_command): Likewise.
1128         * m32r-com.c (m32r_load_section, m32r_load)
1129         (m32r_upload_command): Likewise.
1130
1131         * ui-out.c (ui_out_field_core_addr): Remove unnecessary comment.
1132
1133 2008-01-11  Markus Deuling  <deuling@de.ibm.com>
1134
1135         * gdbarch.sh (skip_prologue): Add gdbarch
1136         as parameter.
1137         * gdbarch.{c,h}: Regenerate.
1138
1139         * alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter.
1140         * amd64-tdep.c (amd64_skip_prologue): Likewise.
1141         * avr-tdep.c (avr_skip_prologue): Likewise.
1142         * cris-tdep.c (cris_skip_prologue): Likewise.
1143         * frv-tdep.c (frv_skip_prologue): Likewise.
1144         * h8300-tdep.c (h8300_skip_prologue): Likewise.
1145         * hppa-tdep.c (hppa_skip_prologue): Likewise.
1146         * i386-tdep.c (i386_skip_prologue): Likewise.
1147         * ia64-tdep.c (ia64_skip_prologue): Likewise.
1148         * iq2000-tdep.c (iq2000_skip_prologue): Likewise.
1149         * m32r-tdep.c (m32r_skip_prologue): Likewise.
1150         * m68hc11-tdep.c (m68hc11_skip_prologue): Likewise.
1151         * m68k-tdep.c (m68k_skip_prologue): Likewise.
1152         * m88k-tdep.c (m88k_skip_prologue): Likewise.
1153         * mep-tdep.c (mep_skip_prologue): Likewise.
1154         * mips-tdep.c (mips_skip_prologue): Likewise.
1155         * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
1156         * mt-tdep.c (mt_skip_prologue): Likewise.
1157         * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
1158         * score-tdep.c (score_skip_prologue): Likewise.
1159         * sh64-tdep.c (sh64_skip_prologue): Likewise.
1160         * sh-tdep.c (sh_skip_prologue): Likewise.
1161         * sparc64-tdep.c (sparc64_skip_prologue): Likewise.
1162         * sparc-tdep.c (sparc32_skip_prologue): Likewise.
1163         * spu-tdep.c (spu_skip_prologue): Likewise.
1164         * v850-tdep.c (v850_skip_prologue): Likewise.
1165         * vax-tdep.c (vax_skip_prologue): Likewise.
1166         * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
1167         * xtensa-tdep.c (xtensa_skip_prologue): Likewise.
1168
1169         * arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace
1170         current_gdbarch by gdbarch.
1171         * m32c-tdep.c (m32c_skip_prologue): Likewise.
1172         * s390-tdep.c (s390_skip_prologue): Likewise.
1173
1174 2008-01-10  Doug Evans  <dje@google.com>
1175
1176         * defs.h (struct continuation_arg): Fix typo in comment.
1177         * target.c (target_translate_tls_address): Fix comment spelling error.
1178
1179 2008-01-09  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1180
1181         * doublest.h (DOUBLEST_PRINT_FORMAT): Remove % from string.
1182         (DOUBLEST_SCAN_FORMAT): Likewise.
1183         * dfp.c (decimal_from_floating): Use DOUBLEST_PRINT_FORMAT.
1184         * ada-lex.l (processReal): Prepend "%" to use of DOUBLEST_SCAN_FORMAT.
1185         * c-exp.y (parse_number): Likewise.
1186         * jv-exp.y (parse_number): Likewise.
1187         * objc-exp.y (parse_number): Likewise.
1188         * p-exp.y (parse_number): Likewise.
1189
1190 2008-01-09  Joel Brobecker  <brobecker@adacore.com>
1191
1192         * gdbtypes.c (create_array_type): Add handling of null Ada arrays.
1193         (check_typedef): Likewise.
1194
1195 2008-01-09  Luis Machado  <luisgpm@br.ibm.com>
1196
1197         * printcmd.c (printf_command): Add seen_big_h, seen_big_d and
1198         seen_double_big_d, treat the new H, D, and DD modifiers as length
1199         modifiers.
1200
1201 2008-01-08  Joel Brobecker  <brobecker@adacore.com>
1202
1203         * dwarf2read.c (read_enumeration_type): Add comment.
1204
1205 2008-01-08  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1206
1207         * config.in: Regenerate.
1208
1209 2008-01-08  Joel Brobecker  <brobecker@adacore.com>
1210
1211         * ada-lang.c (ada_convert_actual): Renames convert_actual.
1212         Make non-static.
1213         (ada_convert_actuals): Delete.
1214         * ada-lang.h (ada_convert_actual): Add declaration.
1215         (ada_convert_actuals): Remove declaration.
1216         * infcall.c: #include "ada-lang.h".
1217         (value_arg_coerce): Add new parameter sp.  Update function
1218         documetnation.  Add handling of Ada function call parameters.
1219         * Makefile.in (infcall.o): Update dependencies.
1220
1221 2008-01-08  Paul Hilfinger  <hilfinger@adacore.com>
1222
1223         * ada-lang.c (ensure_lval): Fix value lval kind.
1224         (convert_actual): Add handling for arguments passed by reference.
1225
1226 2008-01-08  Doug Evans  <dje@google.com>
1227
1228         * dbxread.c (read_dbx_symtab): Fix indentation.
1229
1230 2008-01-07  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1231
1232         * Makefile.in (dfp.o): Depend on expression.h, gdbtypes.h and value.h.
1233         (valarith.o): Depend on dfp.h.
1234         (valops.o): Likewise.
1235         * dfp.c: Include expression.h, gdbtypes.h, value.h and dfp.h.
1236         (set_decnumber_context): New function.
1237         (decimal_check_errors): Likewise.
1238         (decimal_from_number): Likewise.
1239         (decimal_to_number): Likewise.
1240         (decimal_from_string): Use set_decnumber_context and
1241         decimal_check_errors.
1242         (decimal_from_integral): New function.
1243         (decimal_from_floating): Likewise.
1244         (decimal_to_double): Likewise.
1245         (promote_decimal): Likewise.
1246         (decimal_binop): Likewise.
1247         (decimal_is_zero): Likewise.
1248         (decimal_compare): Likewise.
1249         (decimal_convert): Likewise.
1250         * dfp.h (decimal_from_integral): New prototype.
1251         (decimal_from_floating): Likewise.
1252         (decimal_to_double): Likewise.
1253         (decimal_binop): Likewise.
1254         (decimal_is_zero): Likewise.
1255         (decimal_compare): Likewise.
1256         (decimal_convert): Likewise.
1257         * eval.c (evaluate_subexp_standard): Remove expect_type argument from
1258         call to value_from_decfloat.
1259         * valarith.c: Include dfp.h.
1260         (value_args_as_decimal): New function.
1261         (value_binop): Add if block to handle TYPE_CODE_DECFLOAT values.
1262         (value_logical_not): Likewise.
1263         (value_equal): Likewise.
1264         (value_less): Likewise.
1265         (value_pos): Likewise.
1266         (value_neg): Formatting fix.
1267         * valops.c: Include dfp.h.
1268         (value_cast): Add if block to handle TYPE_CODE_DECFLOAT values.
1269         * value.c (unpack_long): Add case to handle TYPE_CODE_DECFLOAT.
1270         (unpack_double): Add if block to handle TYPE_CODE_DECFLOAT.
1271         (value_from_decfloat): Remove expect_type argument.
1272         * value.h (value_from_decfloat): Update prototype.
1273
1274 2008-01-07  Vladimir Prus  <vladimir@codesourcery.com>
1275
1276         Ignore change in name of dynamic linker during
1277         execution on Solaris.  This also unbreaks pending breakpoints.
1278
1279         * solist.h (struct target_so_ops): New field same.
1280         * solib-svr4.c (svr4_same): New.
1281         (_initialize_svr4_solib): Register svr4_same.
1282         * solib.c (update_solib_list): Use ops->same, if available.
1283
1284 2008-01-06  Christopher Faylor  <me+cygwin@cgf.cx>
1285
1286         * win32-nat.c (win32_make_so): Use cygwin-style path to avoid warnings
1287         when using MS-DOS paths.
1288
1289 2008-01-05  Pedro Alves  <pedro@codesourcery.com>
1290
1291         * NEWS: Mention --pid and --core command line behaviour changes.
1292
1293 2008-01-05  Pedro Alves  <pedro@codesourcery.com>
1294
1295         * main.c (captured_main): Remove 'count' varible and the
1296         ALIGN_STACK_ON_ENTRY block that used it.  Error out if --core and
1297         --pid options were issued simultaneously.  If an explicit pid
1298         option was passed, don't fallback to core file.  Detect extra
1299         arguments better in the presence of explicit pid or core
1300         arguments.
1301
1302 2008-01-05  Joel Brobecker  <brobecker@adacore.com>
1303
1304         * ada-lang.c (ada_which_variant_applies): Correctly compute
1305         the value of the discriminant when the variant record is packed.
1306
1307 2008-01-04  Joel Brobecker  <brobecker@adacore.com>
1308
1309         * ada-lang.c (is_name_suffix): Handle middle-name numeric suffixes
1310         that are used to differentiate homonyms.
1311
1312 2008-01-04  Jerome Guitton  <guitton@adacore.com>
1313
1314         * ada-lang.c (decode_packed_array_type): Avoid a seg fault
1315         when the type is an anonymous pointer type.
1316         (ada_check_typedef): Avoid a seg fault when the type is null.
1317         * ada-typeprint.c (print_array_type): Add support for pointer
1318         to packed arrays.
1319
1320 2008-01-04  Paul N. Hilfinger  <hilfinger@adacore.com>
1321
1322         * ada-exp.y: Allow '{type} ADDRESS' notation on left of assignment.
1323
1324 2008-01-04  Joel Brobecker  <brobecker@adacore.com>
1325
1326         * ada-lang.c (ada_evaluate_subexp): Evaluate tagged types in
1327         EVAL_NORMAL mode when noside is EVAL_AVOID_SIDE_EFFECTS.
1328
1329 2008-01-04  Joel Brobecker  <brobecker@adacore.com>
1330
1331         * ada-exp.y (chop_separator): New function.
1332         (write_selectors): Rewrite to re-use chop_separator.
1333         (ada_nget_field_index, get_symbol_field_type): New functions.
1334         (write_var_or_type): Add support for "ptype TYPENAME.FIELD"
1335         expressions.
1336
1337 2008-01-03  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1338
1339         * symtab.c (find_pc_sect_line): Use SYMBOL_VALUE_ADDRESS instead
1340         of SYMBOL_VALUE when working with function symbols.
1341
1342 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1343
1344         * ada-lang.c (resolve_subexp): Add handling of OP_REGISTER
1345         expressions.  These expressions do not need to be rewriten.
1346
1347 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1348
1349         * dwarf2read.c (read_enumeration_type): Flag type as stub if
1350         the given die is a declaration.
1351
1352 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1353
1354         * ada-lang.c (ada_array_bound_from_type): Make non-static.
1355         Handle properly the case when the index type is an enumerated type.
1356         Do not return the subtype of the bounds type, just return the
1357         bounds type directly - this is not needed and is more consistent
1358         with what we do for arrays when no XA parallel type exists.
1359
1360 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1361
1362         * ada-lang.c (static_unwrap_type): Add forward declaration.
1363         (template_to_static_fixed_type): Fields of dynamic types sometimes
1364         also need to be unwrapped. Take this into account.
1365         (ada_to_fixed_type_1): Renamed from ada_to_fixed_type.
1366         (ada_to_fixed_type): New wrapper around ada_to_fixed_type_1.
1367         * ada-typeprint.c (ada_print_type): Get the typename from
1368         the original type, not the base type.
1369
1370 2008-01-03  Jerome Guitton  <guitton@adacore.com>
1371
1372         * ada-lang.c (ada_value_struct_elt, to_fixed_array_type)
1373         (to_fixed_array_type, ada_to_fixed_value_create, unwrap_value):
1374         Update calls to ada_to_fixed_type.
1375         (ada_template_to_fixed_record_type_1): Ditto, but without looking
1376         for the tag.
1377         (ada_to_fixed_type): Add check_tag parameter; do not look for
1378         tag if null.  When looking for a tag, use a fixed record type.
1379         * ada-lang.h (ada_to_fixed_type): Add check_tag parameter.
1380         * ada-valprint.c (printable_val_type, ada_value_print): Update
1381         calls to ada_to_fixed_type.
1382
1383 2008-01-03  Luis Machado  <luisgpm@br.ibm.com>
1384
1385         * doublest.c (convert_floatformat_to_doublest): Call
1386         floatformat_to_doublest instead of floatformat_to_double and use
1387         DOUBLEST variables.
1388         (convert_doublest_to_floatformat): Call floatformat_from_doublest
1389         instead of floatformat_from_double and use DOUBLEST variables.
1390
1391 2008-01-03  Nick Hudson  <nick.hudson@dsl.pipex.com>
1392
1393         * MAINTAINERS (Write After Approval): Add self.
1394
1395 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1396
1397         * symfile.c (set_initial_language): Make non-static.
1398         * symfile.h (set_initial_language): Add declaration.
1399         * language.c: #include "symfile.h".
1400         (set_language): Call set_initial_language if the frame language
1401         could not be determined.
1402
1403 2008-01-03  Paul N. Hilfinger  <hilfinger@adacore.com>
1404
1405         * eval.c (evaluate_subexp_for_address): Provide frame address to
1406         locate_var_value only if it will be needed.
1407
1408 2008-01-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
1409
1410         * linux-nat.c (linux_child_follow_fork): Call also CHECK_FOR_THREAD_DB.
1411
1412 2008-01-02  Joel Brobecker  <brobecker@adacore.com>
1413
1414         * ada-lang.c (ada_evaluate_subexp): Modify the value returned
1415         when noside is EVAL_AVOID_SIDE_EFFECTS to be an lval_memory.
1416         This is needed to make sure that any other treatment applied
1417         to the resulting value does not fail for spurious reason,
1418         such as trying to take the address of this value.
1419
1420 2008-01-02  Joel Brobecker  <brobecker@adacore.com>
1421
1422         * ada-lang.c (ada_value_equal): Dereference reference types when
1423         comparing arrays.
1424
1425 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
1426
1427         Updated copyright notices for most files.
1428
1429 2008-01-01  Christopher Faylor  <me+gdb@cgf.cx>
1430
1431         * win32-nat.c (psapi_module_handle): Remove static.
1432         (get_module_name): Rename from psapi_get_dll_name.  Revamp slightly to
1433         return first module found if base_address is zero.  Don't initialize
1434         psapi function pointers here.  Convert to cygwin paths when
1435         appropriate.
1436         (win32_pid_to_exec_file): Use Cygwin's /proc interface to determine
1437         executable name.  Use get_module_name when that fails or when
1438         !__CYGWIN__.
1439         (_initialize_psapi): New function.  Initialize psapi stuff before it is
1440         needed or issue a warning if it is not found.  Move psapi_module_handle
1441         here.
1442
1443 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1444
1445         * ada-lang.c (ada_remove_trailing_digits): New function.
1446         (ada_remove_po_subprogram_suffix): New function.
1447         (ada_decode): Improve. Move the description of the algorithm
1448         directly inside the code, instead of in the function global
1449         description.
1450
1451 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1452
1453         * ada-valprint.c (ada_val_print_1) [TYPE_CODE_REF]: Ignore deref_ref
1454         and always print the dereferenced value.
1455
1456 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1457
1458         * ada-lang.c (ada_evaluate_subexp, case BINOP_SUB): Add handling
1459         of the case where the first argument is a reference.
1460         (ada_evaluate_subexp, case BINOP_ADD): Likewise.
1461
1462 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1463
1464         Implement support for Ada interface types.
1465
1466         * ada-lang.c (ada_is_dispatch_table_ptr_type): New function.
1467         (ada_is_ignored_field): Ignore fields that are a dispatch table
1468         of a tagged type.
1469
1470 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1471
1472         * top.c (print_gdb_version): Update copyright year.
1473
1474 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1475
1476         * ChangeLog-2007: New ChangeLog rotation.
1477         * ChangeLog: Reset for 2008.
1478         * config/djgpp/fnchange.lst: Add entries for ChangeLog-2006 and
1479         ChangeLog-2007.
1480
1481 For older changes see ChangeLog-2007.
1482 \f
1483 Local Variables:
1484 mode: change-log
1485 left-margin: 8
1486 fill-column: 74
1487 version-control: never
1488 coding: utf-8
1489 End: