1 2009-03-25 Pedro Alves <pedro@codesourcery.com>
3 * remote.c (remote_start_remote): In non-stop mode, call
4 init_wait_for_inferior before adding threads and inferiors.
6 2009-03-25 Joel Brobecker <brobecker@adacore.com>
8 * breakpoint.c (breakpoint_thread_match): Split a large condition
9 into several smaller conditions. No behavior change.
11 2009-03-25 Pedro Alves <pedro@codesourcery.com>
13 * infrun.c (infrun_thread_thread_exit): New.
14 (_initialize_infrun): Attach it to the thread_exit observer.
15 * thread.c (delete_thread_1): Always call the observer, passing it
17 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
18 SILENT, return immediately.
20 2009-03-25 Pedro Alves <pedro@codesourcery.com>
22 * infrun.c (normal_stop): Use has_stack_frames instead of
24 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
25 when there is no thread selected.
26 (mi_cmd_execute): Don't special case commands that can run without
27 a valid selected thread.
28 * top.c (execute_command): Don't special case commands that can
29 run without a valid selected thread. Use has_stack_frames.
30 * infcmd.c (ensure_valid_thread): New.
31 (continue_1, step_1, jump_command, signal_command): Use it.
32 (detach_command): Error out if there's no selected thread/inferior.
33 * thread.c (print_thread_info): Allow having no thread selected.
34 (switch_to_thread): Don't read the PC if there is no current thread.
35 (do_restore_current_thread_cleanup): Don't record the current
36 frame if there is no current thread.
37 (make_cleanup_restore_current_thread): Don't read frame info if
38 there is no selected thread.
39 (_initialize_thread): Don't mark commands as
40 "no_selected_thread_ok".
41 * frame.c (get_current_frame): Error out if there is no valid
43 (has_stack_frames): Return false if there is no valid
45 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
46 "no_selected_thread_ok".
47 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
48 (get_cmd_no_selected_thread_ok): Delete.
49 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
50 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
52 * stack.c (get_selected_block): Use has_stack_frames.
54 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
56 Fix size of FPSCR in Power 7 processors.
57 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
58 (PPC_FEATURE_HAS_DFP): New #define.
59 (ppc_linux_read_description): Check for DFP feature instead of
60 ISA 2.05 to decide on size of the FPSCR.
62 2009-03-25 Kevin Buettner <kevinb@redhat.com>
64 * mn10300-tdep.c (trad-frame.h): Don't include.
65 (prologue-value.h): Include.
66 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
67 (struct mn10300_prologue): Define.
68 (push_reg, translate_rreg, check_for_saved): New functions.
69 (mn10300_analyze_prologue): Rewrite, using prologue-value
70 machinery. Handle more instructions than before. Permit
71 instructions to occur in any order.
72 (mn10300_skip_prologue): Find the extents of the function
73 in question; mn10300_analyze_prologue no longer does this.
74 (mn10300_analyze_frame_prologue): New function.
75 (mn10300_frame_base): New function.
76 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
78 (mn10300_frame_prev_register): Likewise.
79 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
80 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
82 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
84 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
86 Fix completer problem for filename completion on the first try.
88 * gdb/completer.h (gdb_completion_word_break_characters): New function.
89 * gdb/completer.c: Include gdb_assert.h.
90 (complete_line_internal_reason): New enum.
91 (complete_line_internal): Change last argument type to
92 complete_line_internal_reason.
93 Modify function to handle the different complete_line_internal_reason
95 (complete_line): Adapt to change in complete_line_internal.
96 (command_completer): Ditto.
97 (gdb_completion_word_break_characters): Implement new function.
98 * top.c (init_main): Set rl_completion_word_break_hook to
99 gdb_completion_word_break_characters.
102 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
104 ARI fix: "strlen d_name" rule.
105 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
108 2009-03-24 Tom Tromey <tromey@redhat.com>
109 Pedro Alves <pedro@codesourcery.com>
111 * configure, config.in: Rebuild.
112 * configure.ac: Check for libiconvlist.
113 * charset.c: Check HAVE_LIBICONVLIST.
114 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
115 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
116 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
118 (INTERNAL_CFLAGS_BASE): Update.
119 (INTERNAL_LDFLAGS): Update.
122 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
124 * configure.ac: Initialize the variable $PREFER_CURSES.
125 * configure: Regenerated.
127 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
129 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
130 * configure: Regenerated.
132 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
134 ARI fix: "strerror" rule.
135 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
136 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
138 2009-03-23 Joel Brobecker <brobecker@adacore.com>
140 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
141 before looking up the fields inside our struct type.
143 2009-03-23 Joel Brobecker <brobecker@adacore.com>
145 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
146 trying to resolve the type qualification.
148 2009-03-23 Joel Brobecker <brobecker@adacore.com>
150 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
151 we try to apply the attribute on the real type, rather than
152 its associated typedef.
154 2009-03-23 Joel Brobecker <brobecker@adacore.com>
156 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
157 to make sure we try to get the modulus of the actual type, not the
160 2009-03-23 Joel Brobecker <brobecker@adacore.com>
162 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
163 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
164 to get the real type, not the associated typedef.
166 2009-03-23 Joel Brobecker <brobecker@adacore.com>
168 * ada-lang.c (ada_get_field_index): Add handling of the case
169 when TYPE is a typedef of a struct.
171 2009-03-23 Joel Brobecker <brobecker@adacore.com>
173 Add gdb_usleep as a portable version of usleep based on gdb_select.
174 * gdb_usleep.h, gdb_usleep.c: New files.
175 * Makefile.in (SFILES): Add gdb_usleep.c.
176 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
177 (COMMON_OBS): Add gdb_usleep.o.
178 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
179 by call to gdb_usleep.
181 2009-03-23 Joel Brobecker <brobecker@adacore.com>
183 * buildsym.c (end_symtab): If we ignore the subfiles, then
184 unlink the associated symtabs if they were already allocated.
186 2009-03-23 Jerome Guitton <guitton@adacore.com>
188 Provide a way to force building of GDB with libcurses.
189 * configure.ac: Add --with-curses.
190 * configure: Regenerated.
192 2009-03-23 Tom Tromey <tromey@redhat.com>
194 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
197 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
199 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
200 solib_contains_address_p instead of searching.
202 2009-03-23 Tom Tromey <tromey@redhat.com>
204 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
205 (iconv): Make 'inbuf' argument const.
206 (convert_between_encodings): Use ICONV_CONST.
207 (wchar_iterate): Likewise.
209 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
211 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
212 dynamically loaded function.
213 (LookupPrivilegeValueA): Ditto.
214 (OpenProcessToken): Ditto.
215 (AdjustTokenPrivileges): Rename and define placeholder for address of
216 dynamically loaded function.
217 (LookupPrivilegeValueA): Ditto.
218 (OpenProcessToken): Ditto.
219 (set_process_privilege): Remove check for loaded functions.
220 (bad_OpenProcessToken): Define.
221 (_initialize_loadable): Load token functions from advapi here, setting
222 OpenProcessToken function to a dummy static function which always return
223 error if OS doesn't support this functionality.
225 2009-03-22 Nicolas Roche <roche@adacore.com>
226 Christopher Faylor <me+cygwin@cgf.cx>
228 * win32-nat.c (ctrl_c_handler): New function.
229 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
230 is run in a separate console.
232 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
234 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
235 for dynamically loaded function.
236 (DebugBreakProcess): Ditto.
237 (DebugSetProcessKillOnExit): Ditto.
238 (EnumProcessModules): Ditto.
239 (GetModuleFileNameExA): Ditto.
240 (GetModuleInformation): Ditto.
241 (DebugActiveProcessStop): Rename and define placeholder for address of
242 dynamically loaded function.
243 (DebugBreakProcess): Ditto.
244 (DebugSetProcessKillOnExit): Ditto.
245 (EnumProcessModules): Ditto.
246 (GetModuleFileNameExA): Ditto.
247 (GetModuleInformation): Ditto.
248 (psapi_loaded): Delete.
249 (get_module_name): Don't check psapi_loaded, just rely on the fact that
250 dynamically loaded functions will return failure if they weren't
252 (has_detach_ability): Delete.
253 (windows_attach): Remove call to has_detach_ability (). Just rely on
254 functions being callable.
255 (bad_DebugActiveProcessStop): Define.
256 (bad_DebugBreakProcess): Ditto.
257 (bad_DebugSetProcessKillOnExit): Ditto.
258 (bad_EnumProcessModules): Ditto.
259 (bad_GetModuleFileNameExA): Ditto.
260 (bad_GetModuleInformation): Ditto.
261 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
262 dynamic storage here, setting nonexistent functions to dummy static
263 functions which always return error.
265 2009-03-22 Pedro Alves <pedro@codesourcery.com>
267 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
268 to the about_to_proceed observer notification.
269 (mi_about_to_proceed): New.
270 (mi_on_resume): Only output ^running and the prompt here if the
271 target was proceeded.
272 * breakpoint.c (breakpoint_proceeded): New static.
273 (breakpoint_about_to_proceed): New.
274 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
275 the about_to_proceed observer notification.
276 * inferior.h (breakpoint_proceeded): Delete declaration.
277 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
278 Notify the about_to_proceed observers.
279 (struct inferior_status): Delete breakpoint_proceeded member.
280 (save_inferior_status): Don't save it.
281 (restore_inferior_status): Don't restore it.
282 * mi-main.h (mi_proceeded): Declare.
283 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
286 2009-03-22 Pedro Alves <pedro@codesourcery.com>
288 * gdbthread.h (struct thread_info): Add in_infcall member.
289 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
290 Remove reverences to suppress_resume_observer. Refresh
291 `call_thread' after returning from `proceed'.
292 * infcmd.c (suppress_resume_observer): Delete.
293 * inferior.h (suppress_resume_observer): Delete declaration.
294 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
296 * thread.c (set_running): Remove references to
297 suppress_resume_observer.
298 * infrun.c (struct inferior_status): Add in_infcall member.
299 (save_inferior_status): Save it.
300 (restore_inferior_status): Restore it.
302 2009-03-22 Pedro Alves <pedro@codesourcery.com>
304 * infcall.c (run_inferior_call): Remove references to
305 suppress_stop_observer.
306 * infcmd.c (suppress_stop_observer): Delete.
307 (finish_command_continuation): Remove NOTE. Don't clear
308 suppress_stop_observer anymore.
309 (finish_command_continuation_free_arg): Likewise.
310 (finish_forward): Remove references to suppress_stop_observer.
311 Call normal_stop observer if we haven't already.
312 * inferior.h (suppress_stop_observer): Delete.
313 * infrun.c (normal_stop): When deciding to suppress the
314 normal_stop observer, check for proceed_to_finish instead of
315 suppress_stop_observer.
317 2009-03-22 Pedro Alves <pedro@codesourcery.com>
319 * symfile.c (symfile_relocate_debug_section): Remove check for
322 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
323 Jim Blandy <jimb@red-bean.com>
324 Thiago Jung Bauermann <bauerman@br.ibm.com>
325 Tom Tromey <tromey@redhat.com>
327 Miscellaneous fixes to the Python code.
328 * python/python-cmd.c (cmdpy_init): Accept keyword
330 * python/python-value.c (valpy_string): Accept keyword
332 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
333 Do not call value_to_value_object on NULL RES_VAL.
334 (value_object_methods): Change `string' entry to also accept
336 (convert_value_from_python): Return a copy of the value if obj is
338 (value_object_methods): Mark the `string' method as accepting
339 keywords, and show method "prototype" in the doc string.
340 * python/python.c (get_parameter): Don't return inside a
343 2009-03-20 Tom Tromey <tromey@redhat.com>
345 Add support for convenience functions in Python.
346 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
347 (SUBDIR_PYTHON_SRCS): Add python-function.c.
348 (python-function.o): New target.
349 * eval.c: Include "python/python.h" and <ctype.h>.
350 (evaluate_subexp_standard): Handle values of type
351 TYPE_CODE_INTERNAL_FUNCTION.
352 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
353 * parse.c (write_exp_string): Remove duplicate word in comment.
354 * python/python-function.c: New file.
355 * python/python-internal.h (gdbpy_initialize_functions): Add
357 * python/python.c (_initialize_python): Call
358 gdbpy_initialize_functions.
359 * valprint.c (value_check_printable): Handle values of type
360 TYPE_CODE_INTERNAL_FUNCTION.
361 * value.c: Include "cli/cli-decode.h".
362 (internal_function): New struct.
363 (functionlist, internal_fn_type): New static variables.
364 (lookup_only_internalvar,
365 lookup_internalvar): Add const qualifier to name argument.
366 (create_internalvar): Likewise. Initialize new field.
367 (set_internal_var): Fix typo in comment. Don't allow assignment
368 to canonical variable.
369 (value_create_internal_function, value_internal_function_name,
370 call_internal_function, function_command, function_destroyer,
371 add_internal_function): New functions.
372 (_initialize_values): Create `function' placeholder command.
373 Initialize internal_fn_type.
374 * value.h (lookup_only_internalvar, create_internalvar,
375 lookup_internalvar): Add const qualifier to name argument.
376 (internal_function_fn, add_internal_function, call_internal_function,
377 value_internal_function_name): Add prototypes.
378 (struct internalvar) <canonical>: New field.
380 2009-03-20 Tom Tromey <tromey@redhat.com>
382 * c-lang.c (evaluate_subexp_c): Call check_typedef.
384 2009-03-20 Tom Tromey <tromey@redhat.com>
385 Julian Brown <julian@codesourcery.com>
387 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
388 PR i18n/9401, PR exp/9613:
390 * value.h (value_typed_string): Declare.
391 (val_print_string): Update.
392 * valprint.h (print_char_chars): Update.
393 * valprint.c (print_char_chars): Add type argument. Update.
394 (val_print_string): Likewise.
395 * valops.c (value_typed_string): New function.
396 * utils.c (host_char_to_target): New function.
397 (parse_escape): Use host_char_to_target, host_hex_value. Update.
399 (no_control_char_error): Remove.
400 * typeprint.c (print_type_scalar): Update.
401 * scm-valprint.c (scm_scmval_print): Update.
402 * scm-lang.h (scm_printchar, scm_printstr): Update.
403 * scm-lang.c (scm_printchar): Add type argument.
404 (scm_printstr): Likewise.
405 * printcmd.c (print_formatted): Update.
406 (print_scalar_formatted): Update.
407 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
408 Handle '%lc' and '%ls'.
409 * parser-defs.h (struct typed_stoken): New type.
410 (struct stoken_vector): Likewise.
411 (write_exp_string_vector): Declare.
412 * parse.c (write_exp_string_vector): New function.
413 * p-valprint.c (pascal_val_print): Update.
414 * p-lang.h (is_pascal_string_type, pascal_printchar,
415 pascal_printstr): Update.
416 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
417 Add 'char_type' argument.
418 (pascal_emit_char): Add type argument.
419 (pascal_printchar): Likewise.
420 (pascal_printstr): Likewise.
421 * objc-lang.c (objc_emit_char): Add type argument.
422 (objc_printchar): Likewise.
423 (objc_printstr): Likewise.
424 * macroexp.c (get_character_constant): Handle unicode characters.
426 (get_string_literal): Handle unicode strings. Use
428 * m2-valprint.c (print_unpacked_pointer): Update.
429 (m2_print_array_contents): Update.
430 (m2_val_print): Update.
431 * m2-lang.c (m2_emit_char): Add type argument.
432 (m2_printchar): Likewise.
433 (m2_printstr): Likewise.
434 * language.h (struct language_defn) <la_printchar>: Add type
436 <la_printstr, la_emitchar>: Likewise.
437 (LA_PRINT_CHAR): Likewise.
438 (LA_PRINT_STRING): Likewise.
439 (LA_EMIT_CHAR): Likewise.
440 * language.c (unk_lang_emit_char): Add type argument.
441 (unk_lang_printchar): Likewise.
442 (unk_lang_printstr): Likewise.
443 * jv-valprint.c (java_val_print): Update.
444 * jv-lang.c (java_emit_char): Add type argument.
445 * f-valprint.c (f_val_print): Update.
446 * f-lang.c (f_emit_char): Add type argument.
447 (f_printchar): Likewise.
448 (f_printstr): Likewise.
449 * expprint.c (print_subexp_standard): Update.
450 * charset.h (target_wide_charset): Declare.
451 (c_target_char_has_backslash_escape, c_parse_backslash,
452 host_char_print_literally, host_char_to_target,
453 target_char_to_host, target_char_to_control_char): Remove.
454 (enum transliterations): New type.
455 (convert_between_encodings): Declare.
456 (HOST_ESCAPE_CHAR): New define.
457 (host_letter_to_control_character, host_hex_value): Declare.
458 (enum wchar_iterate_result): New enum.
459 (struct wchar_iterator): Declare.
460 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
461 wchar_push_back): Declare.
462 * charset-list.h: New file.
463 * c-valprint.c (textual_name): New function.
464 (textual_element_type): Handle wide character types.
465 (c_val_print): Pass original type to textual_element_type. Handle
466 wide character types.
467 (c_value_print): Use textual_element_type. Pass original type of
469 * c-lang.h (enum c_string_type): New type.
470 (c_printchar, c_printstr): Update.
471 * c-lang.c (classify_type): New function.
472 (print_wchar): Likewise.
473 (c_emit_char): Add type argument. Handle wide characters.
474 (c_printchar): Likewise.
475 (c_printstr): Add type argument. Handle wide and multibyte
477 (convert_ucn): New function.
478 (emit_numeric_character): Likewise.
479 (convert_octal): Likewise.
480 (convert_hex): Likewise.
481 (ADVANCE): New macro.
482 (convert_escape): New function.
483 (parse_one_string): Likewise.
484 (evaluate_subexp_c): Likewise.
485 (exp_descriptor_c): New global.
486 (c_language_defn): Use exp_descriptor_c.
487 (cplus_language_defn): Likewise.
488 (asm_language_defn): Likewise.
489 (minimal_language_defn): Likewise.
490 (charset_for_string_type): New function.
491 * c-exp.y (%union): Add 'svec' and 'tsval'.
493 (exp): Add CHAR production.
494 (string_exp): Rewrite.
495 (exp) <string_exp>: Rewrite.
496 (tempbuf): Now global.
497 (tempbuf_init): New global.
498 (parse_string_or_char): New function.
499 (yylex) <tempbuf>: Now global.
500 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
502 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
503 (c_parse_escape): New function.
504 * auxv.c (fprint_target_auxv): Update.
505 * ada-valprint.c (ada_emit_char): Add type argument.
506 (ada_printchar): Likewise.
507 (ada_print_scalar): Update.
508 (printstr): Add type argument. Update calls to ada_emit_char.
509 (ada_printstr): Add type argument.
510 (ada_val_print_array): Update.
511 (ada_val_print_1): Likewise.
512 * ada-lang.c (emit_char): Add type argument.
513 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
515 * gdb_locale.h: Include langinfo.h.
516 * charset.c (_initialize_charset): Set default host charset from
517 the locale. Don't register charsets. Add target-wide-charset
518 commands. Call find_charset_names.
519 (struct charset, struct translation): Remove.
520 (GDB_DEFAULT_HOST_CHARSET): Remove.
521 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
522 (target_wide_charset_name): New global.
523 (show_host_charset_name): Handle "auto".
524 (show_target_wide_charset_name): New function.
525 (host_charset_enum, target_charset_enum): Remove.
526 (charset_enum): New global.
527 (all_charsets, register_charset, lookup_charset, all_translations,
528 register_translation, lookup_translation): Remove.
529 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
530 (iso_8859_print_literally, iso_8859_to_control,
531 iso_8859_family_charset): Remove.
532 (ebcdic_print_literally, ebcdic_to_control,
533 ebcdic_family_charset): Remove.
534 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
535 register_iconv_charsets): Remove.
536 (target_wide_charset_be_name, target_wide_charset_le_name): New
538 (identity_either_char_to_other): Remove.
539 (set_be_le_names, validate): New functions.
540 (backslashable, backslashed, represented): Remove.
541 (default_c_target_char_has_backslash_escape): Remove.
542 (default_c_parse_backslash, iconv_convert): Remove.
543 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
544 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
545 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
546 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
547 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
548 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
549 (table_convert_char, table_translation, simple_table_translation):
551 (current_host_charset, current_target_charset,
552 c_target_char_has_backslash_escape_func,
553 c_target_char_has_backslash_escape_baton): Remove.
554 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
555 (host_char_to_target_func, host_char_to_target_baton): Remove.
556 (target_char_to_host_func, target_char_to_host_baton): Remove.
557 (cached_iconv_host_to_target, cached_iconv_target_to_host):
559 (lookup_charset_or_error, check_valid_host_charset): Remove.
560 (set_host_and_target_charsets): Remove.
561 (set_host_charset, set_target_charset): Remove.
562 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
563 (set_target_wide_charset_sfunc): New function.
564 (show_charset): Print target wide character set.
565 (host_charset, target_charset): Rewrite.
566 (target_wide_charset): New function.
567 (c_target_char_has_backslash_escape): Remove.
568 (c_parse_backslash): Remove.
569 (host_letter_to_control_character): New function.
570 (host_char_print_literally): Remove.
571 (host_hex_value): New function.
572 (target_char_to_control_char): Remove.
573 (cleanup_iconv): New function.
574 (convert_between_encodings): New function.
575 (target_char_to_host): Remove.
576 (struct wchar_iterator): Define.
577 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
578 wchar_push_back): New functions.
579 (do_cleanup_iterator): New function.
580 (char_ptr): New typedef.
581 (charsets): New global.
582 (add_one, find_charset_names): New functions.
583 (default_charset_names): New global.
584 (auto_host_charset_name): Likewise.
585 * aclocal.m4, config.in, configure: Rebuild.
586 * configure.ac: Call AM_LANGINFO_CODESET.
587 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
588 (AM_ICONV): Invoke earlier.
589 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
590 LIBICONV_LIBDIR. Check for libiconv in build tree.
591 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
592 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
593 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
594 * gdb_obstack.h (obstack_grow_wstr): New define.
595 * gdb_wchar.h: New file.
596 * defs.h: Include it.
598 2009-03-20 Tom Tromey <tromey@redhat.com>
599 Jan Kratochvil <jan.kratochvil@redhat.com>
601 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
602 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
604 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
606 * ada-typeprint.c (print_array_type): Do the NULL check
609 2009-03-19 Tom Tromey <tromey@redhat.com>
611 * utils.c (do_obstack_free): New function.
612 (make_cleanup_obstack_free): Likewise.
613 * defs.h (make_cleanup_obstack_free): Declare.
615 2009-03-18 Doug Evans <dje@google.com>
617 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
618 int, not a long long.
619 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
621 * expprint.c (dump_raw_expression): Print note if non-NULL.
623 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
626 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
628 * Makefile.in: Update license to GPLv3.
629 * ada-exp.y: Update license to GPLv3.
630 * ada-lex.l: Update license to GPLv3.
631 * c-exp.y: Update license to GPLv3.
632 * cp-name-parser.y: Update license to GPLv3.
633 * darwin-nat-info.c: Update license to GPLv3.
634 * f-exp.y: Update license to GPLv3.
635 * gdb_thread_db.h: Update license to GPLv3.
636 * hppanbsd-nat.c: Update license to GPLv3.
637 * hppanbsd-tdep.c: Update license to GPLv3.
638 * hppaobsd-tdep.c: Update license to GPLv3.
639 * jv-exp.y: Update license to GPLv3.
640 * m2-exp.y: Update license to GPLv3.
641 * objc-exp.y: Update license to GPLv3.
642 * p-exp.y: Update license to GPLv3.
643 * reply_mig_hack.awk: Update license to GPLv3.
644 * reverse.c: Update license to GPLv3.
645 * xtensa-xtregs.c: Update license to GPLv3.
647 2009-03-18 Pedro Alves <pedro@codesourcery.com>
649 * remote.c (remote_close): Don't call generic_mourn_inferior.
650 (remote_mourn_1): Call generic_mourn_inferior after closing the
653 2009-03-18 Pedro Alves <pedro@codesourcery.com>
655 * remote.c (remote_start_remote): Add missing call to
656 init_wait_for_inferior in non-stop mode.
658 2009-03-18 Pedro Alves <pedro@codesourcery.com>
660 * breakpoint.c (bpstat_should_step): Only consider software
661 watchpoints that have a location.
663 2009-03-17 Joel Brobecker <brobecker@adacore.com>
665 Add a target_ops parameter to the to_kill method in struct target_ops.
667 * target.h (struct target_ops): Add a "target_ops *" parameter to
669 (target_kill): Remove macro. Add declaration.
670 * target.c (debug_to_kill): Delete, no longer necessary.
671 (target_kill): New function.
672 (update_current_target): Stop inheriting the to_kill method.
673 Do not de_fault it to no_process either.
674 (setup_target_debug): Do not set current_target.to_kill.
675 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
676 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
677 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
680 2009-03-17 Doug Evans <dje@google.com>
682 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
683 glibc 2.3.2 and earlier.
685 2009-03-17 Joel Brobecker <brobecker@adacore.com>
687 * frame.c (get_prev_frame_1): Do not perform the inner_frame
688 sanity check if this_frame is not NORMAL.
689 (frame_id_inner): Update the description of this function.
691 2009-03-17 Hui Zhu <teawater@gmail.com>
693 * stack.c: Change the introduce of "disassemble-next-line".
695 2009-03-17 Pedro Alves <pedro@codesourcery.com>
697 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
700 2009-03-17 Hui Zhu <teawater@gmail.com>
702 * stack.c: Include valprint.h.
703 (disassemble_next_line): New enum.
704 (show_disassemble_next_line): New function. Show the current
705 value of disassemble-next-line.
706 (gdb_disassembly_stub_args): New struct for argument passing
707 between function do_gdb_disassembly and function
708 gdb_disassembly_stub.
709 (gdb_disassembly_stub): New function. Helper for
711 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
712 the exception from the gdb_disassembly because it will be
713 broken by filter sometime.
714 (print_frame_info): If disassemble-next-line is set to auto
715 or on and doesn't have the line debug messages for $pc,
716 output the next instruction.
717 If disassemble-next-line is set to on and there is line debug
718 messages, output assembly codes for next line.
719 (_initialize_stack): Make the "set disassemble-next-line"
720 command an auto-boolean command. Change its class to
721 class_stack. Place it in the top level set list. Extend help
722 to describe the auto mode.
724 2009-03-17 Pedro Alves <pedro@codesourcery.com>
726 * infrun.c (normal_stop): Don't overwrite old_chain.
728 2009-03-16 Joel Brobecker <brobecker@adacore.com>
730 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
731 which is undefined, by call to regcache_invalidate, which should
732 do what the original author wanted to do.
734 2009-03-16 Joel Brobecker <brobecker@adacore.com>
736 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
737 (mips_create_inferior): Likewise.
739 2009-03-16 Joel Brobecker <brobecker@adacore.com>
741 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
743 2009-03-16 Joel Brobecker <brobecker@adacore.com>
745 * darwin-nat.c (darwin_resume): Fix a compiler warning when
746 building on x86_64-darwin.
748 2009-03-16 Tristan Gingold <gingold@adacore.com>
750 * configure.tgt: Add handling for x86_64-darwin.
752 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
754 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
756 2009-03-15 Joel Brobecker <brobecker@adacore.com>
758 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
759 Use the ops parameter to get to the target beneath, rather than
760 using the current_target global. Using the current_target global
761 was an unintended accident.
763 2009-03-15 Joel Brobecker <brobecker@adacore.com>
765 Fix an error happening while loading symbols from a core file
768 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
769 to detect whether we're debugging a core file or not.
771 2009-03-15 Joel Brobecker <brobecker@adacore.com>
773 Modernize the aix-thread later by getting rid of the base_target
774 global. This brings back to life the AIX port which was otherwise
775 crashing all the time.
777 * aix-thread.c (base_target): Delete.
778 (pd_enable): Do not set base_target.
779 (aix_thread_attach): Use find_target_beneath instead of base_target.
780 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
781 (aix_thread_fetch_registers, aix_thread_store_registers),
782 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
783 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
784 (aix_thread_kill): Delete. Does not seem necessary.
785 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
787 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
789 * stack.c (return_command <retval_exp>): New variables retval_expr
790 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
791 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
792 if RETURN_TYPE is NULL.
795 2009-03-14 Pedro Alves <pedro@codesourcery.com>
797 * remote.c (PACKET_qAttached): New.
798 (remote_query_attached): New.
799 (remote_add_inferior): Add new `attached' argument. Handle it.
800 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
801 -1 to remote_add_inferior in new parameter.
802 (extended_remote_attach_1): Adjust to pass 1 to
803 remote_add_inferior in the new parameter.
804 (extended_remote_create_inferior_1): Adjust to pass 0 to
805 remote_add_inferior in the new parameter.
806 (_initialize_remote): Add "set/show remote query-attached-packet"
809 2009-03-13 Tom Tromey <tromey@redhat.com>
811 * symtab.c (lookup_symbol_in_language): Use a cleanup.
813 2009-03-13 Doug Evans <dje@google.com>
815 * exceptions.h: Clean up some comments on catch_exceptions usage.
816 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
819 2009-02-17 Joel Brobecker <brobecker@adacore.com>
821 The following patch helps getting rid of a warning inside solib-som.c.
823 * source.c (source_full_path_of): Constify parameter filename.
824 * defs.h (source_full_path_of): Update declaration accordingly.
826 2009-03-12 Joel Brobecker <brobecker@adacore.com>
828 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
829 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
830 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
832 2009-03-12 Joel Brobecker <brobecker@adacore.com>
834 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
835 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
837 2009-03-12 Joel Brobecker <brobecker@adacore.com>
839 * ada-tasks.c (ada_task_is_alive): Move up and make static.
840 * ada-lang.h (ada_task_is_alive): Remove declaration.
842 2009-03-12 Jerome Guitton <guitton@adacore.com>
844 * ada-lang.c (ada_delta): Change the type of numerators and
845 denominators to DOUBLEST, as they may not fit into a long.
846 (scaling_factor): Ditto.
848 2009-03-12 Jerome Guitton <guitton@adacore.com>
850 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
852 2009-03-12 Joel Brobecker <brobecker@adacore.com>
854 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
855 types, if we are unable to determine the actual symbol type
856 from its tag, then use the static approximation instead.
858 2009-03-12 Joel Brobecker <brobecker@adacore.com>
860 Fix crash printing packed record with packed array.
862 * ada-lang.c (ada_modulus_from_name): New function.
863 (ada_modulus): In the case where the type length is bigger than
864 the size of the type used to hold the bounds, try determining
865 the modulus from the type name.
866 (ada_value_primitive_packed_val): Fix bug in the computation of
867 ntarg causing an out-of-buffer invalid access.
869 2009-03-12 Joel Brobecker <brobecker@adacore.com>
871 Fix segfault when printing short_integer'last.
873 * ada-lang.c (ada_find_any_type): Search in the primitive types
874 if a symbol could not be found.
876 2009-03-12 Joel Brobecker <brobecker@adacore.com>
878 * ada-tasks.c (task_states,long_task_states): Add new states
879 Activating and Acceptor_Delay_Sleep. Update the description
880 of state Acceptor_Sleep.
882 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
884 Fix a build failure on Darwin following some changes in
885 the profile of some target_ops methods.
887 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
889 (darwin_stop_inferior, darwin_detach): Likewise.
891 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
893 Include token in ^running notification for CLI commands.
895 * mi/mi-main.c (mi_execute_command): Set current_token here.
896 (mi_cmd_execute): Do not set current_token here.
898 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
902 * mi/mi-main.c (mi_print_timing_maybe): New.
903 (captured_mi_execute_command): Simplify. Output timings to
905 (mi_execute_async_cli_command): Do not print timings.
906 * mi/mi-main.h (mi_print_timing_maybe): Declare.
907 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
909 2009-03-12 Jerome Guitton <guitton@adacore.com>
911 * xcoffread.c (process_linenos): Check if the line in the
912 include table refers to the main source file and, if so,
913 add them to the main subfile.
915 2009-03-12 Joel Brobecker <brobecker@adacore.com>
917 Fix a build failure on AIX introduced after a change in the profile
918 of some of the "methods" in the target_ops structure.
919 * aix-thread.c: Add missing target_ops parameter throughout.
921 Implement Ada task switching on AIX.
922 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
923 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
925 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
927 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
928 value_mark and value_free_to_mark.
929 * objfiles.c (free_objfile): Call objfile_free_data before
932 2009-03-10 Hui Zhu <teawater@gmail.com>
934 * disasm.c (gdb_disassembly): Remove unused argument
936 * disasm.h (gdb_disassembly): Ditto.
937 * cli/cli-cmds.c (print_disassembly): Ditto.
938 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
940 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
942 * solib.c (solib_contains_address_p): New function.
943 (solib_name_from_address): Use it.
944 * printcmd.c (display_uses_solib_p): Use it.
945 * solib.h (solib_contains_address_p): Declare it.
947 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
949 * varobj.c (free_variable): Call value_free.
951 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
954 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
955 Move the variable `macinfo_type' out of the loop. Create a new
956 processing pass before the current one to pre-create `current_file'.
957 New complaint on misplaced zero/non-zero definitions/includes.
958 Skip first DW_MACINFO_start_file with `at_commandline' set.
960 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
962 * solib.c (reload_shared_libraries): Give
963 inferior a chance to reset solib breakpoint.
966 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
968 * windows-nat.c (dr): Redefine to use largest possible integer which
970 (cygwin_set_dr): Avoid coercion.
972 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
974 * windows-nat.c (windows_create_inferior): Implement --tty handling on
977 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
979 Rename solib_address to solib_name_from_address.
980 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
981 (disable_breakpoints_in_unloaded_shlib): Update.
982 * printcmd.c (display_uses_solib_p): Likewise.
983 * stack.c (print_frame): Likewise.
987 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
989 * printcmd.c (do_one_display): Reparse exp_string.
990 (display_uses_solib_p): New function.
991 (clear_dangling_display_expressions): New function.
992 (_initialize_printcmd): Add observer.
993 * solib.c (no_shared_libraries): Swap order of calls to
994 clear_solib and objfile_purge_solibs.
996 2009-03-05 Joel Brobecker <brobecker@adacore.com>
998 Implement the target-specific part of Ada tasking support
1001 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
1002 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
1004 2009-03-05 Joel Brobecker <brobecker@adacore.com>
1006 Get rid of the global "base_target" and use "find_target_beneath"
1007 to find the underlying target.
1008 * dec-thread.c (base_target): Delete.
1009 (enable_dec_thread): Remove assignement to base_target.
1010 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
1011 (dec_thread_fetch_registers, dec_thread_store_registers)
1012 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
1013 Update the function profile if necessary.
1014 Use find_target_beneath to call the same method but from
1015 the underlying target, removing the need for "base_target".
1017 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
1018 Fix a copy/paste error in a few debug traces...
1020 * solib-osf.c (init_so): Use a simpler method for computing
1021 the size of lm_info structure. This also gets rid of warning
1022 emitted by the compiler.
1024 2009-03-05 Pedro Alves <pedro@codesourcery.com>
1026 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
1027 duplicates of permanent breakpoints.
1029 2009-03-04 Pedro Alves <pedro@codesourcery.com>
1031 * inferior.h (notice_new_inferior): Declare.
1032 * infcmd.c (notice_new_inferior): New.
1033 * remote.c (remote_add_inferior, remote_add_thread): New.
1034 (notice_new_inferiors): Rename to...
1035 (remote_notice_new_inferior): ... this. Add RUNNING argument.
1036 Use remote_add_thread instead of add_thread, passing it the
1037 RUNNING argument. Add an inferior with remote_add_inferior. If
1038 we just learned about an inferior, call notice_new_inferior.
1039 (record_currthread): Adjust.
1040 (remote_threads_info): Adjust to use remote_notice_new_inferior.
1041 (remote_start_remote, extended_remote_attach_1): Use
1042 remote_add_inferior.
1043 (process_stop_reply): Adjust. Call remote_notice_new_inferior
1044 after handling expedited registers and watchpoint state.
1045 (extended_remote_create_inferior_1): Use remote_add_inferior.
1047 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
1049 * infcmd.c (registers_info): Remove register number case.
1051 2009-03-03 Pedro Alves <pedro@codesourcery.com>
1053 * top.c (quit_target): Check for target_has_execution before
1054 killing or detaching from inferiors.
1056 2009-03-02 Joel Brobecker <brobecker@adacore.com>
1058 Remove some unused routines.
1060 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
1062 * ada-lang.c (ada_task_list_iterator_ftype)
1063 (iterate_over_live_ada_tasks): Delete.
1064 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
1067 2009-03-01 Doug Evans <dje@google.com>
1069 * symtab.c: Remove trailing whitespace throughout the file.
1070 (expand_line_sal): Fix some typos and whitespace.
1072 * Makefile.in (clean): rm -f $(DEPDIR)/*.
1074 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
1075 (init.c): signals/ -> common/.
1076 (signals.o): Update.
1077 * target.h (target_signal_to_string,target_signal_to_string)
1078 (target_signal_from_name,target_signal_to_host_p)
1079 (target_signal_from_host,target_signal_to_host): Move to ...
1080 * common/gdb_signals.h: ... here. New file.
1081 * common/signals.c: Moved here from signals/signals.c.
1082 #include gdb_signals.h, remove #include of target.h in gdb case.
1083 (target_signal_from_command,default_target_signal_to_host)
1084 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
1086 Include thread ID in target_wait debugging output.
1087 * infrun.c (print_target_wait_results): New function.
1088 (wait_for_inferior,fetch_inferior_event): Call it.
1090 2009-02-27 Pedro Alves <pedro@codesourcery.com>
1092 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
1093 with a ptid_t field.
1094 * linux-thread-db.c (thread_get_info_callback): Build the ptid
1095 using the pid stored in proc_handle.ptid.
1096 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
1097 (check_for_thread_db, thread_db_detach, check_event)
1098 (thread_db_mourn_inferior, find_new_threads_callback)
1099 (thread_db_find_new_threads_1): Adjust.
1100 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
1101 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
1103 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
1105 * valprint.c (read_string): Rework clean-up logic. Use
1106 free_current_contents to clean-up buffer.
1108 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
1110 * MAINTAINERS: Update e-mail address.
1112 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
1114 * python/python-utils.c (python_string_to_unicode): Always return
1116 (python_string_to_target_string): Decrement transient python
1118 (python_string_to_host_string): Likewise.
1120 2007-02-26 Pedro Alves <pedro@codesourcery.com>
1122 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
1123 call to super_fetch_registers.
1124 (mips64_linux_store_registers): Pass `ops' to call to
1125 super_store_registers.
1127 2009-02-25 Doug Evans <dje@google.com>
1129 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
1132 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
1133 disabled_shlib_breaks, unused.
1135 * printcmd.c (build_address_symbolic): Fix comment.
1137 2009-02-25 Hui Zhu <teawater@gmail.com>
1139 * cli/cli-script.c (define_command): Add _() to query.
1140 * gnu-nat.c (inf_validate_task_sc): Ditto.
1141 * infcmd.c (kill_if_already_running): Ditto.
1142 (jump_command): Ditto.
1143 (attach_command): Ditto.
1144 * inflow.c (kill_command): Ditto.
1145 * infrun.c (handle_command): Ditto.
1146 * maint.c (maintenance_dump_me): Ditto.
1147 * memattr.c (mem_delete_command): Ditto.
1148 * monitor.c (monitor_interrupt_query): Ditto.
1149 * nto-procfs.c (interrupt_query): Ditto.
1150 * printcmd.c (undisplay_command): Ditto.
1151 * remote-mips.c (mips_kill): Ditto.
1152 * remote.c (interrupt_query): Ditto.
1153 * solib-irix.c (irix_open_symbol_file_object): Ditto.
1154 * solib-osf.c (osf_open_symbol_file_object): Ditto.
1155 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
1156 * solib-som.c (som_open_symbol_file_object): Ditto.
1157 * solib-svr4.c (open_symbol_file_object): Ditto.
1158 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
1159 * target.c (kill_or_be_killed): Ditto.
1160 * tracepoint.c (delete_trace_command): Ditto.
1161 * top.c (quit_confirm): Add _() to s that will be used
1164 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
1166 Fix windows-nat.c compilation failure.
1168 * windows-nat.c (windows_thread_alive): Fix forward declaration.
1169 (get_windows_debug_event): Add ops parameter to call to windows_resume.
1171 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1173 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
1175 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
1177 * symtab.c (find_line_symtab): Initialize exact to avoid
1180 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1182 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
1183 `ops' to recursive call.
1185 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1187 * corelow.c (get_core_registers): Adjust.
1188 (core_file_thread_alive): Rename to...
1189 (core_thread_alive): ... this.
1190 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
1191 (init_core_ops): Adjust.
1192 (coreops_suppress_target): Delete.
1193 (_initialize_corelow): Unconditionally add core_ops.
1194 * procfs.c: Include "inf-child.h".
1195 (procfs_ops): Delete.
1196 (init_procfs_ops): Delete. Reimplement as...
1197 (procfs_target): ... this, inheriting from inf-child.
1198 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
1199 (procfs_prepare_to_store): Delete.
1200 (procfs_store_registers, procfs_resume): Adjust.
1201 (procfs_open): Delete.
1202 (procfs_suppress_run): Delete.
1203 (procfs_can_run): Delete.
1204 (procfs_mourn_inferior): Adjust.
1205 (procfs_init_inferior): Add target_ops parameter. Adjust.
1206 (procfs_create_inferior): Don't pass procfs_init_inferior to
1207 fork_inferior. Instead call it after fork_inferior returns.
1208 (procfs_find_new_threads): Adjust.
1209 (_initialize_procfs): Adjust to use procfs_target instead of
1211 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
1212 (lwp_to_thread): Use target_thread_alive.
1213 (sol_thread_open): Delete.
1214 (sol_thread_attach): Delete.
1215 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
1216 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
1217 to use find_target_beneath.
1218 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
1219 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
1220 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
1221 (check_for_thread_db): New.
1222 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
1223 (sol_thread_new_objfile): Call check_for_thread_db.
1224 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
1225 (sol_thread_can_run): Delete.
1226 (sol_thread_alive): Adjust to use find_target_beneath.
1227 (sol_thread_stop): Delete.
1228 (rw_common): Use target_write_memory or target_read_memory.
1229 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
1230 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
1231 (solaris_pid_to_str): Remove check for libthread_db initialization
1233 (sol_find_new_threads): Remove check for libthread_db
1234 initialization failing, or for an invalid inferior_ptid. Adjust
1235 to use find_target_beneath.
1236 (sol_core_open, sol_core_close, sol_core_detach,
1237 sol_core_files_info, sol_find_memory_regions,
1238 sol_make_note_section, ignore): Delete.
1239 (init_sol_thread_ops): Make it a thread_stratum target. Remove
1240 unneeded callback settings.
1241 (init_sol_core_ops): Delete.
1242 (_initialize_sol_thread): No longer call init_sol_core_ops, set
1243 procfs_suppress_run, or hack with core_ops.
1245 * target.h (struct target_ops): Add a target_ops * parameter to
1246 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
1247 and to_find_new_threads.
1248 (target_fetch_registers, target_store_registers)
1249 (target_thread_alive, target_find_new_threads): Redeclare as
1252 * target.c (update_current_target): Do not inherit or de_fault
1253 to_resume, to_fetch_registers, to_store_registers,
1254 to_thread_alive, to_find_new_threads.
1255 (target_resume): Adjust.
1256 (target_thread_alive, target_find_new_threads): New.
1257 (debug_to_resume, debug_to_fetch_registers): Delete.
1258 (target_fetch_registers): New.
1259 (debug_to_store_registers): Delete.
1260 (target_store_registers): New.
1261 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
1262 (setup_target_debug): Adjust.
1264 * gdbcore.h (core_ops): Delete declaration.
1266 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
1267 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
1268 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
1269 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
1270 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
1271 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
1272 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
1273 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
1274 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
1275 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
1276 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
1277 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
1278 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
1279 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
1281 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
1282 * gdbarch.h, gdbarch.c: Regenerate.
1284 * sol2-tdep.c: Include "inferior.h".
1285 (sol2_core_pid_to_str): New.
1286 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
1288 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
1289 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
1290 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
1291 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
1293 2009-02-22 Doug Evans <dje@google.com>
1295 * exec.c (exec_file_attach): Fix comment.
1297 2009-02-22 Pedro Alves <pedro@codesourcery.com>
1299 Silence a few -Wmissing-prototypes warnings.
1302 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
1304 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
1305 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
1306 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
1307 (_initialize_amd64nbsd_tdep): ... this.
1308 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
1309 (_initialize_arm_linux_tdep): Declare.
1310 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
1311 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
1312 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
1313 * avr-tdep.c (avr_return_value): Make it static.
1314 (avr_frame_unwind_cache): Ditto.
1315 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
1316 (bsd_uthread_solib_loaded): Ditto.
1317 (bsd_uthread_solib_unloaded): Ditto.
1318 (bsd_uthread_target): Ditto.
1319 (_initialize_bsd_uthread): Declare.
1320 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
1321 (cris_frame_unwind_cache): Ditto.
1322 * frv-tdep.c (frv_return_value): Ditto.
1323 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
1324 (h8300h_use_struct_convention): Ditto.
1325 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
1327 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
1329 * hppabsd-tdep.c: Include hppabsd-tdep.h.
1330 (hppabsd_find_global_pointer): Make it static.
1331 * hppabsd-tdep.h: New.
1332 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
1333 (hppabsd_init_abi): Remove declaration.
1334 (_initialize_hppabsd_tdep): Remove declaration.
1335 (_initialize_hppanbsd_tdep): Declare.
1336 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
1337 (hppabsd_init_abi): Delete declaration.
1338 (hppaobsd_init_abi): Make it static.
1339 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
1340 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
1341 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
1342 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
1343 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
1344 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
1345 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
1346 (_initialize_m32c_tdep): Declare.
1347 * m32r-rom.c (_initialize_m32r_rom): Declare.
1348 * m32r-tdep.c (m32r_skip_prologue): Make it static.
1349 (m32r_return_value): Ditto.
1350 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
1351 (m68hc11_return_value): Ditto.
1352 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
1353 * m88k-tdep.c (m88k_frame_cache): Make it static.
1354 * mep-tdep.c (mep_gdb_print_insn): Ditto.
1355 (mep_return_value): Ditto.
1356 (_initialize_mep_tdep): Declare.
1357 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
1358 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
1359 (mips_linux_syscall_next_pc): Ditto.
1360 (_initialize_mips_linux_tdep): Declare.
1361 * mips-tdep.c (mips_single_step_through_delay): Make it static.
1362 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
1363 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
1364 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
1365 * mt-tdep.c (_initialize_mt_tdep): Declare.
1366 * nbsd-tdep.c: Include nbsd-tdep.h.
1367 * nto-tdep.c (find_load_phdr): Make it static.
1368 (_initialize_nto_tdep): Declare.
1369 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
1371 (_initialize_ppc_linux_tdep): Declare.
1372 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
1373 (m32r_insert_watchpoint, m32r_remove_watchpoint)
1374 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
1376 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
1377 * rs6000-nat.c: Include xcoffread.h.
1378 (find_toc_address): Don't extern declare get_toc_offset. Adjust
1379 to call xcoff_get_to_offset.
1380 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
1381 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
1382 (rs6000_skip_trampoline_code): Make static.
1383 * s390-tdep.c (s390_regset_from_core_section): Ditto.
1384 * sh-tdep.c (sh_register_reggroup_p): Ditto.
1385 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
1386 (_initialize_shnbsd_tdep): Declare.
1387 * solib-frv.c (displacement_from_map): Make static.
1388 (_initialize_frv_solib): Declare.
1389 * solib-irix.c (fetch_lm_info): Make static.
1390 (_initialize_irix_solib): Declare.
1391 * solib-som.c: Include solib-som.h.
1392 (som_solib_select): Line break.
1393 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
1394 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
1395 (_initialize_sparcnbsd_tdep): ... this.
1396 * spu-tdep.c (spu_software_single_step): Make it static.
1397 (_initialize_spu_tdep): Declare.
1398 * vax-tdep.c (vax_frame_cache): Make it static.
1399 * xcoffread.c: Include xcoffread.h.
1400 (get_toc_offset): Rename to ...
1401 (xcoff_get_toc_offset): ... this.
1402 (_initialize_xcoffread): Declare.
1404 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
1405 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
1407 (_initialize_xtensa_tdep): Declare.
1409 2008-02-21 Pedro Alves <pedro@codesorcery.com>
1411 Silence a few -Wmissing-prototypes warnings.
1414 * amd64-nat.c: Include "amd64-nat.h".
1415 * fork-child.c (_initialize_fork_child): Ditto.
1416 * gcore.c (_initialize_gcore): Ditto.
1417 * inf-ptrace.c: Include "inf-ptrace.h".
1418 (inf_ptrace_store_registers): Make it static.
1419 * linux-nat.c (linux_nat_terminal_ours): Make it static.
1420 (_initialize_linux_nat): Declare before definition.
1421 * linux-tdep.c: Include "linux-tdep.h".
1422 * linux-thread-db.c (_initialize_thread_db): Declare before
1424 * proc-service.c (_initialize_proc_service): Ditto.
1425 * remote.c (remote_send_printf): Make it static.
1426 * solib.c: Include "solib.h".
1427 * symfile-mem.c (_initialize_symfile_mem): Declare before
1429 * ada-lang.c (ada_la_decode, ada_match_name)
1430 (ada_suppress_symbol_printing, ada_is_array_type)
1431 (ada_value_ptr_subscript, ada_array_length)
1432 (ada_to_static_fixed_value): Make them static.
1433 (_initialize_ada_language): Declare before definition.
1434 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
1435 (ada_task_list_changed, ada_new_objfile_observer): Make them
1437 (_initialize_tasks): Declare before definition.
1438 * addrmap.c (_initialize_addrmap): Declare before definition.
1439 * auxv.c (default_auxv_parse): Make it static.
1440 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
1442 * breakpoint.c (remove_sal): Add line break.
1443 (expand_line_sal_maybe): Make it static.
1444 * cp-name-parser.y: Include "cp-support.h".
1445 * cp-valprint.c (cp_find_class_member): Make it static.
1446 * eval.c (value_f90_subarray): Ditto.
1447 * exceptions.c (print_any_exception): Ditto.
1448 * findcmd.c (_initialize_mem_search): Declare before definition.
1449 * frame.c (frame_observer_target_changed): Make it static.
1450 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
1451 * inf-child.c: Include "inf-child.h".
1452 * inferior.h (valid_inferior_id): Rename to ...
1453 (valid_gdb_inferior_id): ... this.
1454 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
1456 * jv-lang.c (java_language_arch_info): Make it static.
1457 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
1458 * osdata.c (info_osdata_command): Make it static.
1459 * regcache.c (regcache_observer_target_changed): Make it static.
1460 * reverse.c (_initialize_reverse): Declare before definition.
1461 * stabsread.c (cleanup_undefined_types_noname)
1462 (cleanup_undefined_types_1): Make them static.
1463 * symfile.c (place_section): Make it static.
1464 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
1465 * target-descriptions.c (_initialize_target_descriptions): Declare
1467 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
1468 (find_default_is_async_p, find_default_supports_non_stop): Make
1470 (target_supports_non_stop): Add prototype.
1471 (dummy_pid_to_str): Make it static.
1472 * utils.c (_initialize_utils): Declare before definition.
1473 * ada-exp.y (_initialize_ada_exp): Declare before definition.
1474 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
1475 * target.h (struct target_ops): Add a prototype to the
1476 to_can_execute_reverse callback.
1477 * macroscope.c (_initialize_macroscope): Declare before definition.
1478 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
1479 * python/python.c (_initialize_python): Declare before definition.
1480 * tui/tui-command.c: Include "tui/tui-command.h".
1481 * tui/tui-data.c (init_content_element, init_win_info): Make them
1483 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
1484 * tui/tui-interp.c (_initialize_tui_interp): Declare before
1486 * tui/tui-layout.c: Include "tui/tui-layout.h".
1487 (_initialize_tui_layout): Declare before definition.
1488 * tui/tui-regs.c: Include "tui/tui-regs.h".
1489 (tui_display_reg_element_at_line): Make it static.
1490 (_initialize_tui_regs): Declare before definition.
1491 * tui/tui-stack.c (_initialize_tui_stack): Declare before
1493 * tui/tui-win.c: Include "tui/tui-win.h".
1494 (_initialize_tui_win): Declare before definition.
1495 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
1496 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
1497 (tui_get_cmd_list): Add a prototype.
1498 * tui/tui-windata.c: Include tui-windata.h.
1499 * tui/tui-wingeneral.c (box_win): Make it static.
1500 * cli/cli-logging.c (show_logging_command): Make it static.
1501 (_initialize_cli_logging): Declare before definition.
1502 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
1505 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
1507 Extend use of i386_use_watchpoints to all i386 native files
1508 using hardware watchpoints.
1509 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
1510 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
1511 * windows-nat.c (init_windows_ops): Ditto.
1512 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
1513 * config/i386/nm-cygwin64.h: Ditto.
1514 * config/i386/nm-fbsd.h: Ditto.
1515 * config/i386/nm-go32.h: Ditto.
1517 2009-02-19 Joel Brobecker <brobecker@adacore.com>
1519 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
1521 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
1523 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
1524 (mi_interpreter_init): Register the above.
1525 * solib.c (clear_solib): Notify solib unload.
1526 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
1527 disable breakpoints on a.out targets.
1529 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
1531 * observer.c (observer_test_first_notification_function)
1532 (observer_test_second_notification_function)
1533 (observer_test_third_notification_function): Adjust prototype.
1535 2009-02-17 Pedro Alves <pedro@codesourcery.com>
1537 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
1538 (ALL_TARGET_OBS): Add dicos-tdep.o.
1539 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
1540 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
1542 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
1544 * dicos-tdep.h, dicos-tdep.c: New.
1545 * amd64-dicos-tdep.c: New.
1546 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
1547 inferior.h. Include dicos-tdep.h.
1548 (i386_dicos_init_abi): Call dicos_init_abi.
1549 (i386_dicos_bfd_has_symbol_p): Delete.
1550 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
1552 * NEWS: Mention x86-64 DICOS target support.
1554 2009-02-16 Doug Evans <dje@google.com>
1556 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
1557 All callers updated.
1558 (amd64_get_insn_details): Handle more 3-byte opcode insns.
1559 (amd64_breakpoint_p): Delete.
1560 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
1561 don't back up pc to the start of the int3.
1562 * i386-tdep.c: #include opcode/i386.h.
1563 (i386_skip_prefixes): New function.
1564 (i386_absolute_jmp_p): Constify argument.
1565 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
1566 (i386_breakpoint_p): Delete.
1567 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
1568 When fixing up after stepping an int3, don't back up pc to the start
1571 2009-02-16 Pedro Alves <pedro@codesourcery.com>
1573 * corelow.c (core_close): Don't hardcode the core's pid.
1574 (core_open): Find core threads before calling
1575 post_create_inferior.
1576 (add_to_thread_list, get_core_register_section): Take into account
1577 systems where the regset section names encode the pid of the
1580 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
1581 * gdbarch.h, gdbarch.c: Regenerate.
1583 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
1584 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
1585 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
1586 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
1588 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
1590 Include frame information for *stopped due to CLI commands.
1592 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
1593 * infcmd.c (finish_command_continuation): Pass '1' for
1594 'print_frame' parameter to the observer.
1595 * infrun.c (normal_stop): Don't print mi-specific information
1596 here. Pass 'stop_print_frame' to the 'print_frame' parameter
1598 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
1599 If we need to print frame, and current uiout is not the MI one,
1602 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
1604 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
1605 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
1607 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
1610 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
1611 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
1613 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
1615 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
1616 for DW_ATE_signed_char and DW_ATE_unsigned_char
1617 for pascal language.
1619 2009-02-11 Jim Meyering <meyering@redhat.com>
1620 Jan Kratochvil <jan.kratochvil@redhat.com>
1622 Avoid NULL dereference.
1623 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
1624 New variable func_type.
1626 2009-02-11 Pedro Alves <pedro@codesourcery.com>
1628 * gdbarch.c: Regenerate.
1630 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
1632 * p-lang.c (is_pascal_string_type): Fix comment.
1633 Determine exact size of char elements for GPC
1635 (pascal_printstr): Handle char width of 2 or 4.
1636 * p-valprint.c (pascal_val_print): Handle char
1639 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
1641 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
1642 inside the loop. Only call addrmap_set_empty if the compilation unit
1643 had DW_AT_high_pc and DW_AT_low_pc. Update call to
1644 scan_partial_symbols.
1645 (scan_partial_symbols): Take NEED_PC argument and pass it along with
1647 (add_partial_namespace): Take NEED_PC argument and pass it through.
1648 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
1651 2009-02-07 Pedro Alves <pedro@codesourcery.com>
1653 * NEWS: Mention inspecting extra signal information, $_siginfo,
1654 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
1656 2009-02-07 Pedro Alves <pedro@codesourcery.com>
1658 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
1661 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1663 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
1664 (compat_timer_t, compat_clock_t, struct compat_timeval)
1665 (compat_sigval_t, compat_siginfo_t): New types.
1666 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
1667 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
1668 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
1669 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
1670 (amd64_linux_siginfo_fixup): New.
1671 * linux-nat.c (linux_nat_siginfo_fixup): New.
1672 (siginfo_fixup): New.
1673 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
1674 siginfo layout expected by ptrace and the siginfo layout of the
1676 (linux_nat_set_siginfo_fixup): New.
1677 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
1679 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1681 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
1682 * infrun.c (siginfo_value_read, siginfo_value_write): New.
1683 (siginfo_value_funcs): New.
1684 (siginfo_make_value): New.
1685 (_initialize_infrun): Create the $_siginfo convenience variable.
1686 * gdbtypes.h (append_composite_type_field_aligned): Declare.
1687 * gdbtypes.c (append_composite_type_field): Rename to...
1688 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
1689 argument. Handle it.
1690 (append_composite_type_field): Rewrite on top of
1691 append_composite_type_field_aligned.
1692 * value.h (internalvar_make_value): New typedef.
1693 (struct internalvar) <make_value>: New field.
1694 (create_internalvar_type_lazy): Declare.
1695 * value.c (create_internalvar): Clear make_value.
1696 (create_internalvar_type_lazy): New.
1697 (value_of_internalvar): If make_value is set use it.
1698 (preserve_values): Skip internal variables that don't have a
1700 * gdbarch.sh (get_siginfo_type): New.
1701 * gdbarch.h, gdbarch.c: Regenerate.
1703 * linux-tdep.h, linux-tdep.c: New.
1704 * amd64-linux-tdep.c: Include "linux-tdep.h".
1705 (amd64_linux_init_abi): Register linux_get_siginfo_type and
1706 linux_get_siginfo_mapper.
1707 * i386-linux-tdep.c: Include "linux-tdep.h".
1708 (i386_linux_init_abi): Register linux_get_siginfo_type and
1709 linux_get_siginfo_mapper.
1710 * arm-linux-tdep.c: Include "linux-tdep.h".
1711 (i386_linux_init_abi): Register linux_get_siginfo_type and
1712 linux_get_siginfo_mapper.
1714 * linux-nat.c (linux_xfer_siginfo): New.
1715 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
1716 * remote.c (PACKET_qXfer_siginfo_read)
1717 (PACKET_qXfer_siginfo_write): New.
1718 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
1719 "qXfer:siginfo:write" features.
1720 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
1721 (_initialize_remote): Add "set/show remote read-siginfo-object"
1722 and "set/show remote write-siginfo-object" commands.
1724 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
1725 (HFILES_NO_SRCDIR): Add linux-tdep.h.
1726 (ALLDEPFILES): Add linux-tdep.c.
1728 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
1729 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
1732 2009-02-06 Jim Blandy <jimb@codesourcery.com>
1733 Daniel Jacobowitz <dan@codesourcery.com>
1734 Vladimir Prus <vladimir@codesourcery.com>
1735 Pedro Alves <pedro@codesourcery.com>
1737 * defs.h (enum lval_type): New value: lval_computed.
1738 * value.h (struct lval_funcs): New type.
1739 (allocate_computed_value, value_computed_funcs)
1740 (value_computed_closure): New declarations.
1741 * value.c (struct value): Add a structure to the location union
1742 for computed lvalues, containing 'funcs' and 'closure' members.
1743 (allocate_computed_value, value_computed_funcs)
1744 (value_computed_closure): New functions.
1745 (value_free): For computed lvalues, call the closure's
1746 'free_closure' function before freeing the value itself.
1747 (value_copy): If we're copying an lval_computed value, call the
1748 closure's 'copy_closure' function.
1749 (set_value_component_location): If the original value is a
1750 computed lvalue, then call the closure's 'copy_closure' function.
1751 (value_of_internalvar): If an internal variable's value is a
1752 computed lvalue, make retrieving its value produce an equivalent
1754 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
1755 their read function.
1756 (value_assign): Assign to computed lvalues by calling their write
1759 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1761 * linux-nat.c (linux_nat_wait): Adjust.
1762 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
1763 * linux-nat.h (thread_db_init): Delete declaration.
1764 * linux-thread-db.c (target_beneath): Delete.
1765 (thread_db_init): Delete.
1766 (thread_db_detach): Use find_target_beneath.
1767 (thread_db_wait): Adjust interface. Use find_target_beneath.
1768 (thread_db_mourn_inferior): Use find_target_beneath.
1769 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
1770 (thread_db_async_mask): Delete.
1771 (thread_db_pid_to_str): Adjust interface. Use
1772 find_target_beneath.
1773 (thread_db_get_thread_local_address): Adjust interface. Use
1774 find_target_beneath.
1775 (init_thread_db_ops): Delete references to delete functions.
1776 * target.c (update_current_target): Don't inherit or default
1777 to_wait. Don't inherit to_pid_to_str and
1778 to_get_thread_local_address.
1779 (target_translate_tls_address): Look for a pushed target that
1780 implements to_get_thread_local_address, and use it instead of
1781 checking for target_get_thread_local_address_p.
1782 (target_wait, target_pid_to_str): Reimplement as functions.
1783 (dummy_pid_to_str): New.
1784 (init_dummy_target): Register it.
1785 (debug_to_wait): Delete.
1786 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
1787 to_get_thread_local_address accept a pointer to struct target_ops.
1788 (target_wait): Delete macro, and declare as function.
1789 (target_pid_to_str): Likewise.
1790 (target_get_thread_local_address)
1791 (target_get_thread_local_address_p): Delete.
1792 (noprocess): Add NORETURN and ATTR_NORETURN tags.
1793 * inf-ptrace.c (inf_ptrace_wait): Adjust.
1794 (inf_ptrace_pid_to_str): New.
1795 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
1796 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
1797 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
1798 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
1800 * corelow.c (core_pid_to_str): Adjust.
1801 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
1802 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
1803 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
1804 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
1805 * hpux-thread.c (hpux_thread_wait): Adjust.
1806 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
1807 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
1808 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
1809 * procfs.c (procfs_pid_to_str): Adjust.
1810 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
1811 * remote-mips.c (mips_wait): Adjust.
1812 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
1813 * remote.c (remote_wait, remote_pid_to_str)
1814 (remote_get_thread_local_address): Adjust.
1815 * rs6000-nat.c (rs6000_wait): Adjust.
1816 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
1817 (sol_thread_wait, solaris_pid_to_str): Adjust.
1818 * spu-linux-nat.c (spu_child_wait): Adjust.
1819 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
1821 2009-02-06 Tom Tromey <tromey@redhat.com>
1823 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
1824 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
1825 (python-cmd.o): New target.
1826 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
1827 completer prototype.
1828 (add_cmd): Initialize destroyer member of cmd_list_element. Use
1829 make_symbol_completion_list_fn as completer.
1830 (delete_cmd): Call destroyer if one is set.
1831 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
1832 completer member. Add destroyer member.
1833 (set_cmd_completer): Add self parameter to
1834 completer prototype.
1835 * command.h (set_cmd_completer): Add cmd parameter to
1836 completer prototype.
1837 * completer.c (noop_completer, filename_completer,
1838 location_completer, expression_completer, command_completer): Adapt
1839 to new completer prototype.
1840 (complete_line_internal): Pass new parameter to completer function.
1841 * completer.h (noop_completer, filename_completer,
1842 location_completer, expression_completer, command_completer): Adapt
1843 prototypes to new completer prototype.
1844 * interps.c (interpreter_completer): Adapt to new completer
1846 * python/python-cmd.c: New file.
1847 * python/python-internal.h (gdbpy_initialize_commands): Add
1849 (gdbpy_doc_cst): Add forward declaration.
1850 * python/python.c (gdbpy_doc_cst): Declare.
1851 (_initialize_python): Call gdbpy_initialize_commands. Initialize
1853 * symtab.c (make_symbol_completion_list_fn): New function.
1854 * symtab.h (make_symbol_completion_list_fn): Add prototype.
1856 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1858 * target.c (target_get_osdata): Check for equal or higher than
1859 process_stratum, not dummy_stratum.
1861 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1863 * remote.c (extended_remote_can_run): Delete.
1864 (init_remote_ops): Don't register it.
1865 * target.c (target_get_osdata): Don't check for target_can_run.
1866 Instead any target that has already been pushed, otherwise
1867 fallback to the default run target.
1869 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1871 * target.c (target_create_inferior, target_detach)
1872 (target_mourn_inferior, target_attach, target_close): Do target
1874 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
1875 (debug_to_mourn_inferior, debug_to_close): Delete.
1876 (setup_target_debug): Adjust.
1878 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1880 * target.h (target_stopped_data_address_p): Delete declaration,
1881 and don't define as macro.
1882 * target.c (target_stopped_data_address_p): Delete.
1884 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
1885 Tom Tromey <tromey@redhat.com>
1887 * python/python-utils.c (target_string_to_unicode): New function.
1888 * python/python-internal.h (target_string_to_unicode): New prototype.
1889 * python/python-value.c (valpy_string): New function.
1890 (value_object_methods): Add `string' entry.
1892 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1894 * target.h (target_tid_to_str): Delete.
1895 * thread.c (print_thread_info, thread_apply_all_command)
1896 (thread_apply_command, thread_command, do_captured_thread_select):
1897 Use target_pid_to_str instead of target_tid_to_str.
1898 * linux-fork.c (delete_fork_command): Likewise.
1900 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1902 * frame.c (has_stack_frames): Make public.
1903 (get_prev_frame): Don't allow a NULL this_frame anymore.
1904 * frame.h (has_stack_frames): Declare.
1905 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
1906 to get_prev_frame, instead start at get_current_frame.
1907 (varobj_create): Check has_stack_frames before getting any frame;
1908 eliminate one usage of deprecated_safe_get_selected_frame.
1910 2009-02-05 Tom Tromey <tromey@redhat.com>
1911 Thiago Jung Bauermann <bauerman@br.ibm.com>
1913 * python/python.c (GdbMethods): Move to bottom of file.
1914 (get_parameter, execute_gdb_command, gdbpy_write,
1915 gdbpy_flush): Remove forward declarations.
1916 (eval_python_from_control_command): Fix error checking of function
1917 PyRun_SimpleString. Fix error string.
1918 (python_command): Likewise.
1919 (execute_gdb_command): Added from_tty argument.
1921 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
1923 * language.h (language_dfn): Add la_get_string member.
1924 (LA_GET_STRING): New macro.
1925 (default_get_string): New prototype.
1926 * language.c (default_get_string): New function.
1927 (unknown_language_defn, auto_language_defn, local_language_defn): Use
1928 default_get_string for la_get_string.
1929 * c-lang.c (c_get_string): New function.
1930 (c_language_defn, cplus_language_defn, asm_language_defn): Use
1931 c_get_string for la_get_string.
1932 (minimal_language_defn): Likewise
1933 * ada-lang.c (ada_language_defn): Likewise.
1934 * f-lang.c (f_language_defn): Use default_get_string for
1936 * jv-lang.c (java_language_defn): Likewise.
1937 * m2-lang.c (m2_language_defn): Likewise.
1938 * objc-lang.c (objc_language_defn): Likewise.
1939 * p-lang.c (p_language_defn): Likewise.
1940 * scm-lang.c (scm_language_defn): Likewise.
1941 * typeprint.c (type_to_string): New function.
1942 * value.h (type_to_string): New prototype.
1943 * valprint.c (val_print_string): Factor out code for reading string
1944 from the inferior into its own function. Put 2 spaces after period
1946 (read_string): New function.
1947 * valprint.h (read_string): New prototype.
1949 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
1950 Tom Tromey <tromey@redhat.com>
1952 PR breakpoints/8079:
1953 * breakpoint.c (print_one_breakpoint): Use exp_string field
1954 to display expression of watchpoints.
1955 (mention): Likewise.
1956 (watch_command_1): Remove trailing whitespace from expression.
1957 * printcmd.c (struct display) <exp_string>: New field.
1958 (display_command): Set exp_string.
1959 (free_display): Free exp_string.
1960 (clear_displays): Use free_display.
1961 (do_one_display): Print exp_string.
1962 (display_info): Likewise.
1964 2009-02-04 Tom Tromey <tromey@redhat.com>
1965 Thiago Jung Bauermann <bauerman@br.ibm.com>
1966 Phil Muldoon <pmuldoon@redhat.com>
1968 * python/python-internal.h (gdbpy_get_value_from_history): Rename
1969 prototype to gdbpy_history.
1970 (gdbpy_is_string): Declare.
1971 (python_string_to_host_string): Declare.
1972 * python/python-utils.c (gdbpy_is_string): New function.
1973 (unicode_to_encoded_string): New function.
1974 (unicode_to_target_string): Use it.
1975 (python_string_to_host_string): New function.
1976 * python/python-value.c (valpy_address): New function.
1977 (convert_value_from_python): Use gdbpy_is_string. Change to throw
1978 Python exception instead of a GDB exception on error. Properly check
1980 (valpy_getitem): Convert field name to host string. Handle array
1981 accesses. Adapt to new behaviour of convert_value_from_python.
1982 (valpy_new): Adapt to new behaviour of convert_value_from_python.
1983 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
1984 VALPY_BITXOR, VALPY_BITOR>: New constants.
1985 (valpy_binop): Update. Adapt to new behaviour of
1986 convert_value_from_python.
1987 (valpy_invert): New function.
1988 (valpy_lsh): Likewise.
1989 (valpy_rsh): Likewise.
1990 (valpy_and): Likewise.
1991 (valpy_or): Likewise.
1992 (valpy_xor): Likewise.
1993 (valpy_richcompare): Call convert_value_from_python instead of doing
1995 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
1996 (gdbpy_get_value_from_history): Rename
1997 function to gdbpy_history.
1998 (gdbpy_initialize_values): Don't set tp_new.
1999 (value_object_type): Add valpy_new.
2000 (value_object_methods): Add `address' entry.
2001 (value_object_as_number): Update for new methods.
2002 * python/python.c (GdbMethods): Rename entry from
2003 `get_value_from_history' to `history'.
2005 2009-02-04 Jerome Guitton <guitton@adacore.com>
2007 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
2008 of type to guard against a crash.
2010 2009-02-04 Jerome Guitton <guitton@adacore.com>
2012 * value.c (value_from_contents_and_address): Always return
2013 a lval_memory value, even if address is null.
2015 2009-02-04 Tristan Gingold <gingold@adacore.com>
2017 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
2018 (amd64_darwin_sigcontext_addr): Ditto.
2019 (darwin_dwarf_signal_frame_p): Ditto.
2020 (i386_darwin_init_abi): Handle signal frames, use the const for
2022 (x86_darwin_init_abi_64): Ditto.
2024 2009-02-04 Tristan Gingold <gingold@adacore.com>
2026 * i386-tdep.c (i386_sigtramp_p): Make it public.
2027 * i386-tdep.h (i386_sigtramp_p): Declare.
2029 2009-02-04 Tristan Gingold <gingold@adacore.com>
2031 * machoread.c (macho_symfile_read): Read minsymtab also from
2033 (macho_symfile_read): Try to read dwarf2 frame info from main
2034 object file, but not from OSO files.
2035 (macho_symfile_offsets): Update section names for latest BFD
2037 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
2038 (x86_darwin_init_abi_64): Ditto.
2039 * solib-darwin.c: New file.
2040 * solib-darwin.h: New file.
2041 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
2043 2009-02-04 Tristan Gingold <gingold@adacore.com>
2045 * solist.h (struct target_so_ops): Comment fallback behavior for
2048 2009-02-03 Tom Tromey <tromey@redhat.com>
2050 * completer.c (add_struct_fields): Check type_name against NULL
2053 2009-02-03 Joel Brobecker <brobecker@adacore.com>
2055 * MAINTAINERS: Update Elena's email address.
2057 2009-02-02 Joel Brobecker <brobecker@adacore.com>
2059 * breakpoint (update_watchpoint): Minor comment adjustment.
2061 2009-02-02 Tom Tromey <tromey@redhat.com>
2064 * completer.c (count_struct_fields): Count method names.
2065 (add_struct_fields): Add matching method names.
2067 2009-02-02 Doug Evans <dje@google.com>
2069 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
2070 doing any further tcl/tk configury. Don't configure gdbtk if
2071 tcl or tk check fails.
2072 * aclocal.m4: Regenerate.
2073 * configure: Regenerate.
2075 2009-02-02 Tom Tromey <tromey@redhat.com>
2078 * valops.c (find_overload_match): Follow typedefs before taking
2079 address of object argument.
2081 2009-02-01 Doug Evans <dje@google.com>
2083 * target.h (target_waitstatus_to_string): Declare.
2084 * target.c (target_waitstatus_to_string): New function. Copied from
2085 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
2086 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
2087 TARGET_WAITKIND_NO_HISTORY.
2088 (debug_to_wait): Call it.
2089 * infrun.c (wait_for_inferior): If debug_infrun, print result of
2091 (fetch_inferior_event): Ditto.
2093 2009-01-30 Tom Tromey <tromey@redhat.com>
2095 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
2097 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
2100 * thread.c (do_captured_list_thread_ids): Report the current
2103 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
2105 * breakpoint.c (create_breakpoint, create_breakpoints)
2106 (break_command_really, set_breakpoint): New parameter enabled.
2107 (create_breakpoint, break_command_really): Make breakpoint
2108 disabled if so requested.
2109 * breakpoint.h (set_breakpoint): New parameter enabled.
2110 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
2112 2009-01-28 Doug Evans <dje@google.com>
2114 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
2115 (amd64_displaced_step_fixup): Declare.
2116 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
2117 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
2118 and make static global.
2119 (amd64_arch_regmap_len): New static global.
2120 (amd64_arch_reg_to_regnum): New function.
2121 (struct amd64_insn): New struct.
2122 (struct displaced_step_closure): New struct.
2123 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
2124 (rex_prefix_p,skip_prefixes)
2125 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
2126 (amd64_insn_length,amd64_get_unused_input_int_reg)
2127 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
2128 (amd64_displaced_step_copy_insn)
2129 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
2130 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
2131 (amd64_displaced_step_fixup): New functions.
2132 * amd64-linux-tdep.c: #include arch-utils.h.
2133 (amd64_linux_init_abi): Install displaced stepping support.
2135 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
2136 Jerome Guitton <guitton@adacore.com>
2138 * configure, config.in: Regenerated.
2139 * configure.ac: Add --with-system-gdbinit.
2140 * main.c (get_init_files): New.
2141 (captured_main): Use get_init_files. Load system gdbinit before
2143 (print_gdb_help): Print location of init files.
2145 2009-01-28 Pedro Alves <pedro@codesourcery.com>
2147 * corefile.c (generic_search): Delete disabled code.
2148 * gdbcore.h (generic_search): Delete declaration.
2150 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2152 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
2153 parent to the child.
2154 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
2155 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
2156 remove_breakpoints to remove breakpoints from the parent.
2158 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2160 PR backtrace/9458, PR backtrace/8864:
2161 * frame.c (create_new_frame): Update the frame's cached PC before
2162 finding its unwinder. Use frame_id_build to build the new frame's
2164 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
2165 array values from the ``args'' array values.
2167 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2169 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
2170 (create_array_type, create_set_type, init_flags_type)
2171 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
2172 with a call to XZALLOC or XCALLOC, and pairs of calls to
2173 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
2175 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2177 Add "maint set|show internal-error|internal-warning quit|corefile
2178 ask|yes|no" commands.
2181 * utils.c (internal_problem_ask, internal_problem_yes)
2182 (internal_problem_no, internal_problem_modes): New.
2183 (struct internal_problem): Remove FIXME. Make should_quit and
2184 should_dump_core types to char *.
2185 (internal_vproblem, internal_error_problem)
2186 (internal_warning_problem): Adjust.
2187 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
2189 (add_internal_problem_command): New.
2190 (_initialize_utils): New.
2192 2009-01-25 Pedro Alves <pedro@codesourcery.com>
2194 * infcmd.c (program_info): Use paddress instead of casting stop_pc
2197 2009-01-24 Pedro Alves <pedro@codesourcery.com>
2199 * infrun.c (normal_stop): Don't call
2200 deprecated_update_frame_pc_hack.
2201 * frame.c (deprecated_update_frame_pc_hack)
2202 (deprecated_update_frame_base_hack): Delete, and ...
2203 (create_new_frame): ... inline here.
2204 * frame.h (deprecated_update_frame_pc_hack)
2205 (deprecated_update_frame_base_hack): Delete declarations.
2207 2009-01-23 Pedro Alves <pedro@codesourcery.com>
2209 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
2210 * cli/cli-setshow.c (do_setshow_command): Handle it.
2211 * command.h (enum var_types): Add var_zuinteger.
2212 (add_setshow_zuinteger_cmd): Declare.
2214 * valprint.c (_initialize_valprint): Change the set input-radix
2215 and set output-radix commands to zuinteger type.
2217 2009-01-23 Pedro Alves <pedro@codesourcery.com>
2220 * infrun.c (normal_stop): Tag threads as stopped, and run the
2221 hook-stop before printing the stack frame.
2223 2009-01-22 Pedro Alves <pedro@codesourcery.com>
2226 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
2229 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
2231 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
2234 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
2237 * infcmd.c (signal_command): Do not specify a resume PC.
2239 2009-01-19 Doug Evans <dje@google.com>
2241 * dummy-frame.c (dummy_frame): Replace regcache member with
2243 (dummy_frame_push): Replace caller_regcache arg with caller_state.
2244 All callers updated.
2245 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
2246 (dummy_frame_pop): Rewrite. Verify requested frame is in the
2247 dummy frame stack. Restore program state.
2248 (cleanup_dummy_frames): Rewrite.
2249 (dummy_frame_sniffer): Update. Make static.
2250 * dummy-frame.h (regcache,frame_info): Delete forward decls.
2251 (inferior_thread_state): New forward decl.
2252 (dummy_frame_push): Update prototype.
2253 * frame.c (frame_pop): dummy_frame_pop now does all the work for
2255 * infcall.c (breakpoint_auto_delete_contents): Delete.
2256 (get_function_name,run_inferior_call): New fns.
2257 (call_function_by_hand): Simplify by moving some code to
2258 get_function_name, run_inferior_call. Inferior function call wrapped
2259 in TRY_CATCH so there's less need for cleanups and all exits from
2260 proceed are handled similarily. Detect program exit.
2261 Detect program stopping in a different thread.
2262 Make error messages more consistent.
2263 * inferior.h (inferior_thread_state): Declare (opaque type).
2264 (save_inferior_thread_state,restore_inferior_thread_state,
2265 make_cleanup_restore_inferior_thread_state,
2266 discard_inferior_thread_state, get_inferior_thread_state_regcache):
2268 (save_inferior_status): Update prototype.
2269 * infrun.c: (normal_stop): When stopped for the completion of an
2270 inferior function call, verify the expected stack frame kind.
2271 (inferior_thread_state): New struct.
2272 (save_inferior_thread_state,restore_inferior_thread_state,
2273 do_restore_inferior_thread_state_cleanup,
2274 make_cleanup_restore_inferior_thread_state,
2275 discard_inferior_thread_state,
2276 get_inferior_thread_state_regcache): New functions.
2277 (inferior_status): Move stop_signal, stop_pc, registers to
2278 inferior_thread_state. Remove restore_stack_info.
2279 (save_inferior_status): Remove arg restore_stack_info.
2280 All callers updated. Remove saving of state now saved by
2281 save_inferior_thread_state.
2282 (restore_inferior_status): Remove restoration of state now done by
2283 restore_inferior_thread_state.
2284 (discard_inferior_status): Remove freeing of registers, now done by
2285 discard_inferior_thread_state.
2287 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2289 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
2290 at a time, times NUM_TO_SCROLL.
2291 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
2292 fetch the selected frame if there is no stack.
2294 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2297 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
2299 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
2300 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
2301 is thrown while handling an event, finish the thread state.
2302 (normal_stop): Use finish_thread_state cleanup.
2303 * infcmd.c (run_command_1): If an error is thrown while starting
2304 the inferior, finish the thread state.
2306 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2308 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
2309 skip breakpoints without a location (pending breakpoints).
2311 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2314 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
2316 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
2318 * thread.c (thread_command): Move call to annotate_thread_changed
2320 (do_captured_thread_select): ... here, to avoid printing an
2321 annotation if the thread change generates an exception.
2323 2009-01-16 Joel Brobecker <brobecker@adacore.com>
2325 * NEWS: Document x86_64/MinGW as a new native configuration.
2327 2009-01-16 Joel Brobecker <brobecker@adacore.com>
2329 * NEWS: Move the documentation of "info os processes" to
2330 the appropriate section (documenting the new commands).
2332 2009-01-15 Doug Evans <dje@google.com>
2334 * target.h (target_signal_to_string): Make return type const char *.
2335 (target_signal_to_name): Ditto.
2336 (target_signal_from_name): Make arg const char *.
2337 * infrun.c (sig_print_info): Update.
2338 * signals/signals.c (signals): Make array and struct members const.
2339 (target_signal_to_string): Make return type const char *.
2340 (target_signal_to_name): Ditto.
2341 (target_signal_from_name): Make arg const char *.
2343 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2344 Tristan Gingold <gingold@adacore.com>
2346 * solist.h (struct target_so_ops): New member bfd_open.
2347 (solib_find): Add prototype.
2348 (solib_bfd_fopen): Add prototype.
2349 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
2350 from solib_bfd_open.
2351 (solib_bfd_open): Use ops->bfd_open override if present. Call
2352 solib_find and solib_bfd_open otherwise.
2354 * objfiles.h (OBJF_KEEPBFD): New define.
2355 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
2356 objfile flag is set.
2357 * solib.c (symbol_add_stub): Do not allocate second BFD for
2358 shared library; use OBJF_KEEPBFD flag on solib objfile.
2360 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2362 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
2364 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2366 * value.h (address_of_variable): Add prototype.
2367 (locate_var_value): Remove prototype.
2369 * findvar.c (read_var_value): Do not attempt to default frame
2371 (locate_var_value): Remove function.
2372 * valops.c (value_of_variable): Retrieve selected frame for
2373 symbols that require a frame when called with NULL block.
2374 * valops.c (address_of_variable): New function.
2376 * eval.c (evaluate_subexp_for_address): Call address_of_variable
2377 instead of calling locate_var_value.
2378 (evaluate_subexp_with_coercion): Likewise.
2380 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
2382 * NEWS: Document "define" for prefixed commands.
2383 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
2384 show_user_1 for prefix commands.
2385 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
2386 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
2387 commands. Return the containing command list.
2388 (define_command, document_command): Update to handle prefix commands.
2389 (show_user_1): Add prefix and name arguments. Handle prefix
2391 * cli/cli-script.h (show_user_1): Update prototype.
2393 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
2395 * mingw-ser.c (console_select_thread): Add return to make
2397 (pipe_select_thread): Likewise.
2398 (file_select_thread): Likewise.
2400 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2402 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
2405 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2407 * remote.c (extended_remote_mourn_1): Invalidate our notion of
2408 current general thread.
2410 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2412 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
2413 without a live selected thread.
2415 2009-01-14 Joel Brobecker <brobecker@adacore.com>
2417 Update the copyright notice of some of the files I missed
2418 in the previous copyright update.
2420 2009-01-14 Joel Brobecker <brobecker@adacore.com>
2422 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
2423 base address instead of casting it to DWORD.
2425 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
2427 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
2428 for NULL frame pointers.
2430 2009-01-13 Mark Kettenis <kettenis@gnu.org>
2432 * utils.c (host_address_to_string): Reimplement in a way that
2433 avoids the cast of the address to long.
2435 2009-01-13 Joel Brobecker <brobecker@adacore.com>
2437 * mdebugread.c (parse_symbol): Save the symbol private data
2438 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
2439 (psymtab_to_symtab_1): Likewise.
2440 (parse_procedure): Declare variable "e" only in the scope
2441 where it is used. Extract the symbol private data using
2444 2009-01-13 Jim Blandy <jimb@codesourcery.com>
2446 Abstract out common code for copying value locations.
2448 * value.h (set_value_component_location): New declaration.
2449 * value.c (set_value_component_location): New function.
2450 (value_primitive_field): Use it.
2451 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
2452 * valops.c (search_struct_field, value_slice): Same.
2453 * ada-lang.c (coerce_unspec_val_to_type)
2454 (ada_value_primitive_packed_val): Same.
2456 2009-01-13 Joel Brobecker <brobecker@adacore.com>
2458 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
2460 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
2462 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
2464 * i386-cygwin-tdep.c: Ditto.
2465 * i386-windows-nat.c: Ditto.
2466 * windows-nat.h: Ditto.
2467 * windows-tdep.c: Ditto.
2468 * windows-tdep.h: Ditto.
2469 * windows-nat.c: Ditto.
2470 (cygwin_load_start): Redefine as CORE_ADDR.
2471 (cygwin_load_end): Ditto.
2472 (windows_make_so): Coerce result of address arithmetic to uintptr_t
2473 before coercing to CORE_ADDR to avoid a compiler warning.
2474 (handle_exception): Define addr as CORE_ADDR and coerce
2475 ExceptionAddress to uintptr_t before assigining to avoid a compiler
2477 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
2480 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2482 Fix linking with --enable-targets=all:
2483 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
2484 (HFILES_NO_SRCDIR): Add windows-tdep.h.
2485 (ALLDEPFILES): Add windows-tdep.c.
2487 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
2489 * win32-nat.h: Delete.
2490 * windows-nat.h: Rename from win32-nat.h.
2491 * win32-nat.c: Delete.
2492 * windows-nat.c: Rename from win32-nat.c.
2493 * win32-termcap.c: Delete.
2494 * windows-termcap.c: Rename from win32-termcap.c.
2495 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
2496 * configure.ac: Handle rename from win32-termcap.c ->
2498 * configure: Regenerate.
2499 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
2500 -> windows-termcap.c.
2501 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
2503 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
2504 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
2506 (win32_make_so): Handle cygwin compiler warning due to change of
2507 load_addr from DWORD to LPVOID.
2508 (handle_load_dll): Use %p in format string to properly print address
2509 and avoid a compiler warning.
2510 (DEBUG_EXCEPTION_SIMPLE): Ditto.
2511 (handle_exception): Ditto.
2512 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
2513 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
2515 * config/i386/mingw.mh: Ditto.
2516 * config/i386/mingw64.mh: Ditto.
2518 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2520 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
2521 arrayprint_recurse_level to a parameter. Update all the callers. New
2522 comment at autovariables.
2524 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2526 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
2529 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2531 * target.c (target_xfer_partial): Use host_address_to_string to
2532 print the address of readbuf and writebuf. Cast the address of
2533 elements inside the myaddr buffer into intptr_t.
2534 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
2535 Cast the address of elements inside the myaddr buffer into
2538 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2540 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
2541 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
2542 * configure.host, configure.tgt: Add handling for x86_64/windows.
2543 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
2544 and amd64-windows-tdep.c.
2546 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2548 * win32-tdep.h, win32-tdep.c: New files.
2549 * i386-cygwin-tdep.h: Delete.
2550 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
2552 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
2553 * win32-nat.c: Likewise.
2554 * configure.tgt: Add win32-tdep.o to the list of target object
2555 files for i386-cygwin and i386-mingw targets.
2557 2009-01-11 Joel Brobecker <brobecker@adacore.com>
2559 * win32-nat.h: New file.
2560 * win32-nat.c (mappings): Initialize to NULL.
2561 (win32_set_context_register_offsets): New function.
2562 * i386-windows-nat.c: New file.
2563 (mappings): Moved here from win32-nat.c.
2564 (_initialize_i386_windows_nat): New function.
2565 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
2566 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
2568 2009-01-09 Andreas Schwab <schwab@suse.de>
2570 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
2572 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
2574 * gdbtypes.c (append_composite_type_field): Correct the location of
2577 2009-01-09 Pedro Alves <pedro@codesourcery.com>
2579 * defs.h (deprecated_error_hook): Delete declaration.
2580 * interps.c (clear_interpreter_hooks): Adjust.
2581 * remote-sim.c (gdb_os_error): Don't try to call
2582 deprecated_error_hook. No need to call exit anymore.
2583 * top.c (deprecated_error_hook): Delete.
2585 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2587 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
2588 to print the address of the gdbarch pointer.
2590 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2592 * gdbarch.sh: Fix all the compilation errors on amd64-windows
2593 due to casting a pointer to a long when printing a function
2594 address. Instead, use host_address_to_string to convert our
2595 address to a string.
2596 * gdbarch.c: Regenerate.
2598 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2600 * event-top.c (async_disconnect, async_stop_sig): use "raise"
2601 instead of "kill" to raise a signal.
2603 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2605 * win32-nat.c (get_module_name): Change the type of parameter
2606 "base_address" to LPVOID. Remove unnecessary cast.
2607 (struct lm_info): Change type of load_addr to LPVOID.
2608 (win32_make_so): Change the type of parameter "load_addr"
2609 to LPVOID. Remove some unnecessary casts.
2610 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
2611 (win32_xfer_shared_libraries): Add missing cast.
2613 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2615 * win32-nat.c (has_detach_ability, set_process_privilege):
2616 Cast the result of GetProcAddress to (void *) to avoid
2617 a compilation warning.
2619 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2621 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
2624 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2626 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
2627 definition of local variable "done".
2628 (info_w32_command, handle_exception): Remove unnecessary cast.
2630 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2632 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
2633 DebugSetProcessKillOnExit. Update all uses in this file.
2634 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
2635 Update all uses in this file.
2637 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2639 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
2640 and use it when pushing the target.
2641 (win32_attach, win32_create_inferior): Update call to
2642 do_initial_win32_stuff.
2643 (win32_detach, win32_mourn_inferior): Use our ops parameter
2644 instead of the global win32_ops to unpush the target.
2646 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2648 * ser-mingw.c (ser_windows_open): Use proper type when casting
2649 in call to _open_osfhandle.
2651 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
2653 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
2655 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2657 * CONTRIBUTE: Minor reformatting.
2659 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
2661 * MAINTAINERS: Add myself to Write After Approval.
2662 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
2665 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
2667 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
2668 Call exit to make it obvious to GCC.
2670 2009-01-08 Tom Tromey <tromey@redhat.com>
2672 PR breakpoints/9350:
2673 * varobj.c (varobj_invalidate): Unconditionally free
2675 * symfile.c (syms_from_objfile): Free local_addr when returning
2677 * exec.c (exec_file_attach): Do cleanups before returning.
2678 (exec_file_command): Likewise.
2679 * corefile.c (reopen_exec_file): Do cleanups before returning.
2680 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
2682 (do_vec_free): New function.
2683 (update_global_location_list): Make a cleanup for old_locations.
2684 Do cleanups before returning. Remove unused variable 'e'.
2685 (find_condition_and_thread): Free result of parsing the
2687 (print_it_typical): Do cleanups before returning.
2688 (breakpoint_re_set_one): Always free sals.sals.
2690 2009-01-08 Joel Brobecker <brobecker@adacore.com>
2691 Emi Suzuki <emi-suzuki@tjsys.co.jp>
2693 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
2696 2009-01-07 Doug Evans <dje@google.com>
2698 * top.c (gdb_prompt_string): Delete, unused.
2700 2009-01-07 Pedro Alves <pedro@codesourcery.com>
2702 Delete ONE_PROCESS_WRITETEXT leftovers.
2704 * breakpoint.c (insert_bp_location): Delete process_warning
2706 (insert_breakpoint_locations): Adjust.
2707 (reattach_breakpoints): Adjust.
2708 * infrun.c (normal_stop): Drop "It might be running in another
2711 2009-01-07 Stan Shebs <stan@codesourcery.com>
2713 * config/pa/linux.mh (XDEPFILES): Remove.
2715 2009-01-07 Doug Evans <dje@google.com>
2717 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
2719 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2721 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
2722 spacing, a regression from 2008-04-22.
2724 2009-01-07 Joel Brobecker <brobecker@adacore.com>
2726 * utils.c (gdb_print_host_address): Adjust implementation to
2727 reuse host_address_to_string. Move comment explaining the conversion
2728 from host address to string from here...
2729 (host_address_to_string): ... to there.
2731 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
2733 * MAINTAINERS: Add myself for write after approval privileges.
2735 2009-01-06 Tom Tromey <tromey@redhat.com>
2737 * value.c (set_internalvar): Use value_free, not xfree.
2739 2009-01-06 Jim Blandy <jimb@red-bean.com>
2741 Check return values of functions declared with warn_unused_result
2742 attribute in GLIBC 2.8.
2743 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
2744 * inflow.c (check_syscall): New function.
2745 (new_tty): Use check_syscall to check return values from open and dup.
2746 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
2747 * main.c (captured_main): Call cwd after setting up gdb_stderr;
2748 check for errors from getcwd.
2749 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
2750 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
2751 (stdio_file_fputs): Same.
2752 * utils.c (internal_vproblem): abort if last-ditch error message
2755 * top.c (gdb_init): Don't set the current directory here; that's
2756 already been done in captured_main.
2758 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
2760 * ser-tcp.c: Adjust includes.
2761 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
2762 (tcp_auto_retry, tcp_retry_limit): Declare.
2763 (TIMEOUT): Remove, in favor of tcp_retry_limit.
2764 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
2765 (wait_for_connect): New function.
2766 (net_open): Use it. Add auto-retry logic.
2767 (set_tcp_cmd, show_tcp_cmd): New functions.
2768 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
2769 and "set/show tcp connect-timeout" commands.
2770 * NEWS: Document new commands.
2772 2009-01-05 Tom Tromey <tromey@redhat.com>
2774 * python/python-internal.h (Py_ssize_t): Define as int.
2776 2009-01-05 Jim Blandy <jimb@red-bean.com>
2778 * MAINTAINERS: Fix my e-mail address as steering committee member.
2780 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2782 Updated copyright notices for most files.
2784 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2786 * top.c (print_gdb_version): Update copyright year.
2788 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2790 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
2792 2009-01-01 Pedro Alves <pedro@codesourcery.com>
2794 PR breakpoints/9681:
2795 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
2796 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
2797 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
2798 retrow all other exceptions.
2800 For older changes see ChangeLog-2008.
2806 version-control: never