* configure.in: Improve sorting/formatting of hosts and targets.

[binutils-gdb.git] / gdb / ChangeLog

Thu Jun 16 14:41:37 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * configure.in: Improve sorting/formatting of hosts and targets.
        (i[34]86-*-mach3*, i[34]86-*-osf1mk*, mips-*-mach3*,
        m88*-*-mach3*, ns32k-*-mach3*): Recognize.
        * Makefile.in (gdb-stop): New target.
        * gdb-stop.c: New file, utility to gets attention of waiting GDBs
        in Mach 3.

Wed Jun 15 00:41:03 1994  Tom Lord  (lord@rtl.cygnus.com)

        * top.c (gdb_init): Init current_directory in gdb_init.  Probably
        the identical initialization can be deleted from main.c, but i
        haven't done so just in case.

Tue Jun 14 17:24:41 1994  Tom Lord  (lord@x1.cygnus.com)

        * gdba.el: Added menu windows and slightly improved window
        handling to gdba.el.  Fixed numerous minor bugs that were causing
        emacs and gdb to fall out of sync.

Tue Jun 14 16:18:44 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * breakpoint.c: annotate changes lost at merge, put back in.

Mon Jun 13 17:28:50 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * config/i386/i386sco.mh, i386sco4.mh (XDEPFILES): Remove
        i387-tdep.o.

Sun Jun 12 03:51:52 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * config/m68k/dpx2.mh (NATDEPFILES):  Remove duplicate inclusion
        of inftarg.o.
        * config/m68k/tm-dpx2.h (CANNOT_STORE_REGISTER):  Define to inhibit
        writing of floating registers, the dpx2 kernel disallows it.
        * irix5-nat.c (LM_ADDR):  The loaded address of the shared library
        is contained in o_praw.
        * irix5-nat.c (solib_map_sections):  Adjust sections by the
        difference between the loaded address and the prelinked address.
        * irix5-nat.c (solib_address):  Use LM_ADDR for the loaded start
        address.
        * mdebugread.c (parse_symbol):  Do not relocate stEnd/scText
        symbols, their value is absolute.
        * mdebugread.c (parse_partial_symbols):  Handle Irix 5.2 shared
        libraries fh->adr fields of zero. Relocate minimal symbol values
        upon readin. Relocate non-stabs symbols upon readin.
        * mdebugread.c (psymtab_to_symtab_1):  Use pst->textlow for the
        start address of the outermost block.
        * mdebugread.c (parse_lines, parse_procedure):  Pass in pst
        instead of section_offsets and use relocated pst->textlow for
        line number and procedure address relocations.

        From gmo@MicroUnity.com (Guillermo A. Loyola):
        * mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref):
        Handle SGI Irix5 stIndirect symbol type.

Fri Jun 10 14:52:56 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * breakpoint.c: fix a syntax error native cc does not like.

        * Makefile.in: change sparclite-tdep.c to sparcl-tdep.c.
        * sparclite/Makefile.in: ditto.
        * sparcl-tdpe.c: change file name because first 8 chars has to be 
        unique.
        * sparcl-stub.c: ditto.

        * .Sanitize: add sparclite-stub.c sparclite-tdep.c to keep.

        * sparclite/Makefile.in: fix INCLUDE_CFLAGS to have {srcdir}/../config.

Fri Jun 10 10:38:15 1994  Jeff Law  (law@snake.cs.utah.edu)

        * hppa-tdep.c (target_read_pc, target_write_pc): Accept (and
        ignore) a PID argument.
        (hppa_pop_frame): Pass a PID to target_write_pc.
        * config/pa/tm-hppa.h (TARGET_READ_PC, TARGET_WRITE_PC): Accept
        and pass through a PID argument.
        (target_read_pc, target_write_pc): Update prototypes.

Thu Jun  9 18:10:44 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * Makefile.in: add new file sparclite-tdep.c.
        * sparclite/Makefile.in: add new file sparclite-stub.c.
        * sparclite/hw_breakpoint.note: note for SPARClite hardware breapoint
        support.
        * config/sparc/sparclite.mt: add sparclite-tdep.o.
        * config/sparc/tm-sparclite.h: add hardware breakpoints support 
        defiines and code.
        * sparclite-tdep.c: new file, contains hardware breakpoint support
        code.
        * sparclite-stub.c: new file, stub code that add support hardware
        breakpoint support.
        * breakpoint.c: add hardware breakpoint support.
        * breakpoint.h: add new breakpoint type to support hardware
        breakpoint.
        * config/mips/nm-irix4.h: change interface for target dependent
        code supporting watch point.
        * config/pa/nm-hppab.h: change interface for target dependent
        code supporting watch point.

Thu Jun  9 14:59:58 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * remote-os9k.c (rombuf_command): fix a bug accepting rombug
        output.
        * stabsread.c (read_struct_fields): os9k nested structure does not
        have terminating ';', instead it just get to ',' and bit position
        and length.

Wed Jun  8 23:20:45 1994  Stu Grossman  (grossman@cygnus.com)

        * nlmread.c (nlm_symtab_read):  Clean up a bit.
        * (nlm_symfile_read):  Record bounds of main() so that backtrace
        command will know where to stop.
        * objfiles.c (objfile_relocate):  Relocate entry point/func info
        for backtrace as well.
        * objfiles.h:  Define values for invalid PCs for entry point info.
        * symfile.c (init_entry_point_info):  Initialize invalid values
        with aforementioned macros.
        * config/alpha/tm-alphanw.h:  Turn on FRAME_CHAIN_VALID_ALTERNATE
        to cause backtrace to stop when it gets back to main().
        * config/i386/tm-i386nw.h:  Ditto.

Sat Jun  4 18:17:03 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        Fix value_print, which used to be ostensibly language-independent,
        but would print pointers and arrays in C syntax.  Instead, call
        a language-specific function.
        * language.h (struct language_defn):  New functional field
        la_value_print.
        (LA_VALUE_PRINT):  New macro.
        * language.c (unk_lang_value_print):  New stub/dummy function.
        (unknown_language_defn, auto_language_defn, local_language_defn):
        Use it.
        * c-valprint.c (c_value_print):  New function, with code moved from:
        * valprint.c (value_print):  ... here.  Now just invoke
        LA_VALUE_PRINT to do language-specific stuff.
        * valprint.c (value_print_array_elements):  Make non-static.
        * c-lang.c (c_language_defn, cplus_language_defn):  Add
        c_value_print in the la_value_print field.
        * m2-lang.c (m2_language_defn):  Likewise.
        * ch-lang.c (chill_language_defn):  But here use chill_value_print.
        * ch-valprint.c (chill_val_print):  Print null pointer as NULL.
        * ch-valprint.c (chill_value_print):  New function, based on
        c_value_print, but use Chill "look and feel."
        * c-lang.h (c_value_print):  New prototype.
        * ch-lang.h (chill_value_print):  New prototype.
        * value.h (value_print_array_elements):  New prototype.

        * ch-valprint.c (chill_val_print, case TYPE_CODE_BITSTRING
        and case TYPE_CODE_SET):  Check that the element type isn't a stub.

Fri Jun  3 09:15:00 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * main.c: Move entire file except for #ifndef MAIN_OVERRIDE code
        to new file top.c.  Make things extern instead of static and
        similar rearrangements to deal with this.
        * top.h: New file.
        * utils.c: Move fputs_unfiltered to main.c.  Remove 
        FPUTS_UNFILTERED_OVERRIDE ifndef.
        * Makefile.in: Change so that gdb uses main.c, utils.c, and top.c,
        and libgdb uses utils.c and top.c.

Thu Jun  2 23:19:10 1994  Jeff Law  (law@snake.cs.utah.edu)

        * hppa-tdep.c (skip_trampoline_code): Fix typo.

Thu Jun  2 18:09:59 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        * ch-valprint.c (chill_val_print_array_elements):  New function.
        A Chill version of val_print_array_elements, it prints the
        array index labels, in additions ot the array element values.
        (chill_val_print):  Use the new function.

Thu Jun  2 08:50:00 1994  Stu Grossman  (grossman@cygnus.com)

        * configure.in:  Add nlm subdir to configdirs for alpha-*-netware
        target.
        * defs.h (enum language):  Add language_asm.
        * findvar.c (read_register_bytes read_register_gen
        write_register_bytes read_register read_register_pid
        write_register write_register_pid supply_register):  Move multi-
        thread handling down into these routines.  Create XXX_pid routines
        that allow register references to specify the pid.
        * findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid
        read_sp write_sp read_fp write_fp):  Move these routines from
        infcmd to findvar to centralize the whole mess.
        * i386-nlmstub.c:  Portability fixes.
        * infptrace.c (child_resume):  Conditionalize to allow other natives
        to override it.  Remove PIDGET gubbish, it's no longer necessary.
        * infrun.c (wait_for_inferior):  Put registers_changed() before
        target_wait() to speed up remote debugging.
        * Replace code that reads registers from other threads with much
        nicer looking new function calls (see changes to findvar.c).
        * Don't skip prologues if debugging assembly source.
        * lynx-nat.c (child_resume):  Lynx now needs it's own version of
        child_resume to handle multi-thread debugging properly.
        * remote.c:  Add O response to get console output from target.
        * (readchar): Add timeout parameter.  Handle SERIAL_EOF and
        SERIAL_ERROR here to simplify callers.
        * Change static var timeout to remote_timeout.
        * (fromhex):  Remove unnecessary return -1 at end of routine.
        * (remote_wait):  Turn this into a big switch statement.  Add
        support for O response.
        * (putpkt):  Remove unnecessary handling of SERIAL_EOF/ERROR.
        * (getpkt):  Split getpkt into two parts.  read_frame deals with
        all formatting issues, run-length encoding, and framing.  getpkt
        now handles error recovery, and frame detection.
        * ser-tcp.c (tcp_readchar):  Handle EINTR from read().
        * ser-unix.c (hardwire_raw):  Set CLOCAL so that we ignore modem
        control.  (hardwire_readchar):  Handle EINTR from read().
        * symfile.c (deduce_language_from_filename):  Add support for .s
        files.
        * config/nm-lynx.h:  Define CHILD_WAIT so that lynx-nat.c can
        override infptrace's child_wait.
        * config/rs6000/rs6000lynx.mh:  Use xm-rs6000ly.h & nm-rs6000ly.h
        instead of XXXlynx.h.
        * config/rs6000/rs6000lynx.mt:  Use tm-rs6000ly.h instead of
        tm-rs6000lynx.h.
        * nlm/gdbserve.c:  Portability fixes.

Tue May 31 20:35:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * inftarg.c (child_wait): Call proc_wait, not wait.
        (child_mourn_inferior): Call proc_remove_foreign.
        * main.c (gdb_init): Call init_proc.
        * main.c: Provide dummy versions of init_proc, proc_wait, and
        proc_remove_foreign for the gdb case (the libgdb case provides its
        own versions of these functions).
        * Makefile.in (libgdb-files): Add libproc.a.

Wed Jun  1 11:08:52 1994  Stan Shebs  (shebs@andros.cygnus.com)

        Hardware watchpoints for Linux, from Rick Sladkey
        (jrs@world.std.com).
        * infrun.c (wait_for_inferior) [HAVE_CONTINUABLE_WATCHPOINT]: Add
        new hardware breakpoint recovery method.
        * i386v-nat.c (i386_insert_watchpoint,
        i386_insert_nonaligned_watchpoint, i386_remove_watchpoint,
        i386_stopped_by_watchpoint) [TARGET_CAN_USE_HARWARE_WATCHPOINT]:
        New functions to support the 386 hardware debugging registers.
        * config/i386/nm-linux.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT,
        HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT,
        target_insert_watchpoint, target_remove_watchpoint): Define these
        macros to use the hardware debugging functions in i386v-nat.c.

Wed May 25 17:06:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * Makefile.in: Replace libgdb.a with libgdb-files.  Make "all"
        build it.

Thu May 19 09:56:20 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * target.c, target.h: New variables target_activity_function and
        target_activity_fd.
        * inflow.c, inferior.h: New functions set_sigio_trap and
        clear_sigio_trap.
        * inftarg.c (child_wait), procfs.c (wait_fd): Call them.

Wed May 18 13:01:55 1994  Doug Evans  (dje@canuck.cygnus.com)

        * remote-sim.h (sim_verbose): Delete.
        Document callbacks needed.
        (sim_*): Change result to void where there isn't one.
        (sim_open): Clarify argument and error response.
        (sim_close): Declare.
        (sim_load): Change bfd_handle argument to file name.  Clarify result.
        (sim_create_inferior): Renamed from sim_set_args.
        (sim_set_pc): Delete.
        (sim_info): Delete printf_fn argument.
        * remote-sim.c (gdbsim_kill): Add comment describing purpose.
        (gdbsim_load): Try sim_load first.
        (gdbsim_create_inferior): Call sim_create_inferior.
        (gdbsim_open): Handle args == NULL.  Update call to sim_open.
        (gdbsim_close): Call sim_close.
        (gdbsim_files_info): Update call to sim_info.
        (gdbsim_ops): Realign comments.

        * printcmd.c (decode_format): Allow TARGET_PTR_BIT to be non-constant.

Tue May 17 16:45:20 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * xcoffread.c (read_xcoff_symtab): For C_FILE symbols, only use
        the auxent if the symbol's name is ".file".  From David Edelsohn 
        <c1dje@watson.ibm.com>.

Tue May 17 11:08:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * breakpoint.c (breakpoint_1): Fix typo.

        * annotate.c (annotate_field_end): Fix typo.

        * Makefile.in: Move annotate.o from COMMON_OBS to OBS.

        * Makefile.in (TSSTART): Remove; no longer used.

        * utils.c (vfprintf_maybe_filtered, vfprintf_unfiltered): Call
        fputs_unfiltered and exit directly, rather than fatal.  The latter
        calls vfprintf_unfiltered!

        * gdbtypes.h, gdbtypes.c (can_dereference): New function.
        * value.h, printcmd.c (print_value_flags): Move from here...
        * annotate.c: ...to here, and make it use can_dereference.

Sat May 14 15:13:52 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * inflow.c (job_control, attach_flag, generic_mourn_inferior):
        Remove, needed for both native and cross.
        * target.c (attach_flag, generic_mourn_inferior): Put here.
        * utils.c (job_control): Put here.
        (terminal.h): Don't include anymore.

Sat May 14 09:11:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * source.c (find_source_lines): Always use code that was #ifdef
        BROKEN_LARGE_ALLOCA.  Do the cleanup before returning, rather than
        leaving it on the chain.  Reindent much of this function.
        * config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
        config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
        config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
        config/ns32k/xm-ns32km3.h: Remove all references to
        BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
        * main.c, fork-child.c, many config files: Remove all
        SET_STACK_LIMIT_HUGE code; with the above changes it should no
        longer be needed.

        * symtab.c (lookup_partial_symbol): Use if and abort, not assert.
        This avoids __eprintf troubles.

Fri May 13 08:10:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * main.c (main): Surround in #ifndef MAIN_OVERRIDE.  Move
        initialization code which needs to be called even if we bypass the
        command line stuff into gdb_init.
        * utils.c (fputs_unfiltered): Surround in #ifndef
        FPUTS_UNFILTERED_OVERRIDE.
        * Makefile.in (libgdb.a): New target.

        * utils.c: Rearrange I/O stuff a bit so that all output goes
        through fputs_unfiltered.  Use vasprintf; removes arbitrary limit
        which made %s not work with arbitrarily large strings.
        * printcmd.c (printf_command): Use printf_filtered, not
        printf_unfiltered and printf, now that arbitrary limit is gone.

        gcc -Wall lint:
        * breakpoint.c (watchpoint_check): Remove unused variable b.
        * stack.c (print_frame_info): Move sp and buf inside #if.
        * eval.c (evaluate_subexp): Remove unused variables pp,
        mangle_ptr, ptr, and mangle_tstr.
        * valarith.c (value_x_binop): Remove unused variables mangle_tstr
        and mangle_ptr.
        * symtab.c (lookup_symtab): Put variable copy inside #if.
        (decode_line_1): Put variable q1 inside #if 0.
        * target.h: Declare target_link.
        * infrun.c (wait_for_inferior): Remove unused variables signame.
        * remote.c (remote_resume): Remove unused variable name.
        * c-exp.y (parse_number): Parenthesize operand of shift.
        * dbxread.c (record_minimal_symbol): Parenthesize operand of &&
        (this is a semantic change, the warning seems to have detected a bug).
        * dbxread.c (end_psymtab): Move variable p1 inside #if.
        * coffread.c: Move variable temptype inside #if.
        * ch-typeprint.c (chill_type_print_base): Remove unused variable
        name.
        * ch-valprint.c: #include typeprint.h and ch-lang.h.
        (chill_val_print): Remove unused variable in_range.
        (chill_val_print): Remove statement "length > TYPE_LENGTH (type);".
        (chill_val_print): Add default case for switch.
        * stabsread.h: Declare stabsect_build_psymtabs.
        * os9kread.c (read_minimal_symbols): Make this return void.
        (os9k_symfile_read): Remove unused variables stb_exist and val.
        (os9k_symfile_init): Remove unused variable val.
        (fill_sym): Remove unused variable id.
        (read_os9k_psymtab): Put variable back_to inside #if 0.  Remove
        unused variable nsl.
        Remove unused variable symfile_bfd.
        #if 0 unused variables lbrac_unmatched_complaint and
        lbrac_mismatch_complaint.
        Remove declaration for non-existent function os9k_next_symbol_text.

        * annotate.c, annotate.h: New files, containing a function for
        each annotation which outputs it.
        * Move breakpoints_changed from breakpoint.c to annotate.c.
        * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c,
        printcmd.c, source.c, stack.c, utils.c, valprint.c:
        Use annotate.c functions to output annotations.
        * Makefile.in (OBS): Add annotate.o.

Thu May 12 10:46:27 1994  Jeff Law  (law@snake.cs.utah.edu)

        * hppa-tdep.c (read_unwind_info): Make sure elf_unwind_size and
        elf_unwind_entries are always initialized.

        * hppa-tdep.c (skip_trampoline_code): Handle argument relocation
        stubs which return directly to the caller rather than to the stub
        itself.

Wed May 11 20:11:51 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * c-exp.y (yyerror): Display a more informative error message.
        * ch-exp.y (yyerror): Ditto, don't use global yychar.
        * m2-exp.y (yyerror): Ditto.

Tue May 10 11:57:53 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * inflow.c (job_control): Move definition to front of file.

Tue May 10 14:42:37 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * maint.c (print_section_table): Rename SEC_SHARED_LIBRARY to
        SEC_COFF_SHARED_LIBRARY to match corresponding change in bfd.

Fri May  6 13:30:22 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * Makefile.in (kdb): Remove old init.c creation commands.
        * configure.in (sparclite): Match on sparclite*.
        * sparclite/aload.c (main): Only change section addresses for
        a.out format object files.

Fri May  6 13:24:04 1994  Steve Chamberlain  (sac@cygnus.com)

        * config/i386/go32.mh: Define CC.

Fri May  6 11:56:54 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * gdbserver/Makefile.in: Remove irrelevant definitions and
        comments inherited from the gdb Makefile.
        (BFD_DIR, BFD, BFD_SRC, BFD_CFLAGS): Add from gdb Makefile.
        (VERSION): Update to 4.12.3.
        (gdbserver): Remove any existing executable first.
        (distclean, realclean): Remove nm.h.
        * gdbserver/low-lynx.c: Add Sparc Lynx support.
        * gdbserver/low-sparc.c, gdbserver/low-sun3.c (sys/wait.h):
        Don't use absolute pathname.

Thu May  5 12:00:22 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * rs6000-nat.c (vmap_ldinfo): Don't fail if fstat returns an
        error.

Wed May  4 06:56:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * infrun.c (proceed, normal_stop, wait_for_inferior), breakpoint.c
        (print_it_normal): Add annotations for the inferior starting and
        stopping, and for all the various messages related to how it
        stopped.

        * printcmd.c (do_one_display): Annotate.
        * stack.c (print_frame_info): Annotate printing of stack frames.

Wed May  4 18:15:51 1994  Stu Grossman  (grossman@cygnus.com)

        * remote.c (get_offsets):  Handle case where stub doesn't support
        qOffsets message.

Wed May  4 15:30:39 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        Add partial support for g++ code compiled with -fvtable-thunks.
        * c-valprint.c (c_val_print):  Add vtblprint support
        when using thunks.
        * cp-valprint.c (cp_is_vtbl_member):  A vtable can be an array of
        pointers (if using thunks) as well as array of structs (otherwise).
        * cp-valprint.c (vtbl_ptr_name_old, vtbl_ptr_name):  Move to global
        level, and make the latter non-static (so define_symbol can use it).
        * stabsread.c (define_symbol):  If the type being defined is a
        pointer type named "__vtbl_ptr_type", set the TYPE_NAME to that name.
        * symtab.h (VTBL_PREFIX_P):  Allow "_VT" as well as "_vt".
        * values.c (value_virtual_fn_field):  Handle thunks.
        * values.c (value_headof):  Minor efficiency hack.
        * values.c (value_headof):   Incomplete thunk support.  FIXME.

Wed May  4 06:56:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * valprint.c (print_longest): Clarify comment about use_local.
        * printcmd.c, defs.h (print_address_numeric), callers in
        symmisc.c, symfile.c, stack.c, source.c, remote.c, infcmd.c,
        cp-valprint.c, core.c, ch-valprint.c, c-valprint.c, breakpoint.c,
        exec.c: New argument use_local.
        * source.c (identify_source_line): Use filtered output.  Use
        print_address_numeric. 

        * core.c (memory_error), symtab.c (cplusplus_hint, decode_line_1),
        language.c (type_error, range_error): Use filtered output.
        * utils.c (error_begin): Update comment to tell people to use
        filtered output.

        * Makefile.in (HFILES_WITH_SRCDIR): List bfd.h.
        (HFILES_NO_SRCDIR): List gdbcore.h not gdbcore_h, so as not to get
        bfd.h.

Tue May  3 07:41:33 1994  Jim Kingdon  (kingdon@cygnus.com)

        * procfs.c (procfs_wait): Reinstate code which deduces the signal
        from the fault, #ifndef FAULTED_USE_SIGINFO.
        * config/sparc/tm-sun4sol2.h: Define FAULTED_USE_SIGINFO.

Fri Apr 29 18:15:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * breakpoint.c (breakpoint_1): Annotate each field of the headers.
        Explicitly annotate each record.

Fri Apr 29 15:56:18 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * xcoffexec.c: Reformat to standards and lint.
        (language.h): Include.
        (exec_close): Declare arg "quitting".
        (file_command): Declare arg "from_tty".
        (map_vmap): Cast xmalloc result to PTR.
        * rs6000-nat.c: Reformat to standards and lint.
        (exec_one_dummy_insn): Use char array for saved instruction.
        (fixup_breakpoints): Declare.
        (vmap_ldinfo): Be more informative in fatal error messages.
        (xcoff_relocate_symtab): Define to return void.
        * xcoffsolib.h: Reformat to standards, improve comments.
        * config/rs6000/nm-rs6000.h (xcoff_relocate_symtab): Declare.

Thu Apr 28 08:40:56 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * utils.c, defs.h (error_begin): New function.
        (quit): Print annotation before printing the error message.
        * main.c (return_to_top_level): Print annotation before doing the
        longjmp.
        * symtab.c (decode_line_1): Call error not warning and then
        return_to_top_level.  Call error_begin and printf_unfiltered
        rather calling warning (before calls to return_to_top_level).
        * core.c (memory_error): Use error_begin, printf_unfiltered,
        print_address_numeric and return_to_top_level instead of error.
        Cleans up a FIXME-32x64.
        * language.c (type_error, range_error): Call error_begin
        not just target_terminal_ours.

        * dbxread.c (stabsect_build_psymtabs): Assign to sym_stab_info
        directly, rather than via DBX_SYMFILE_INFO.  A cast on the left
        side of an assignment is non-portable.

        * utils.c (query): Change syntax of query annotations to be
        consistent with other input annotations.
        (prompt_for_continue): Likewise for prompt-for-continue annotation.

Thu Apr 28 01:20:39 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * mdebugread.c (psymtab_to_symtab_1):  Do not call sort_blocks
        for stabs symtabs.
        * mips-tdep.c (mips_skip_prologue):  Handle prologues for functions
        that have a stack frame size of 32k or larger (from Paul Flinders).
        Remove #if 0'd code.

Wed Apr 27 16:33:51 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * lynx-nat.c (CANNOT_STORE_REGISTER): Add a fallback definition
        for Lynx platforms that need it.
        * config/nm-lynx.h (__LYNXOS): Define if not already defined.

Wed Apr 27 16:01:37 1994  Jim Kingdon  (kingdon@cygnus.com)

        * procfs.c (procfs_wait): Use the signal from the pr_info rather
        than trying to deduce it from the fault.

Wed Apr 27 12:22:46 1994  Steve Chamberlain  (sac@cygnus.com)

        * printcmd.c (print_address_symbolic): Initialize name to empty
        string to avoid core dump if lookup fails.
        * remote-e7000.c (printf_e7000debug): Error if target not open.

Tue Apr 26 22:45:24 1994  Stu Grossman  (grossman at cygnus.com)

        * i386-nlmstub.c:  Update to be more in line with PIN stub.
        * nlm/gdbserve.c (putDebugChar):  Install bug fix from i386-nlmstub.
        * (hex2mem):  Init ptr.
        * General cleanups to use ConsolePrintf, standard prologues, etc...

Tue Apr 26 10:23:04 1994  Stu Grossman  (grossman at cygnus.com)

        * i386-nlmstub.c:  More changes to be compatible with remote.c.

        * dbxread.c:  Move a bunch of strncmps out of process_one_symbol
        into (the far less frequently called) dbx_symfile_read.

        * i386-nlmstub.c:  An interim version till we get PIN for the x86.

Tue Apr 26 09:50:45 1994  Stu Grossman  (grossman at cygnus.com)

        * dbxread.c (record_minimal_symbol):  Record the section
        associated with the symbol to make dynmaic relocation work.
        * (dbx_symfile_read, process_one_symbol):  Fixes to work around
        Solaris brain-damage which don't apply to relocatable object
        files.
        * (stabsect_build_psymtabs):  New routine to read stabs out of an
        arbitrarily named section.
        * nlmread.c (nlm_symtab_read):  Read ALL syms from the NLM, not just
        globals.
        * (nlm_symfile_read):  Call stabsect_build_psymtabs to read the
        stabs out of the nlm.
        * partial-stabs.h (cases 'f' & 'F'):  Fixes to work around Solaris
        brain-damage which don't apply to relocatable object files.
        * remote.c (putpkt):  Improve error reporting and error handling.
        * (get_offsets):  Temporary kludge to force data & bss sections to
        have the same relocation.
        * stabsread.c (define_symbol, scan_file_globals):  Record section
        info in sym.

Sat Apr 23 19:05:52 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * breakpoint.c (breakpoint_1): Annotate each field of output.  Add
        FIXME-32x64 comment.

Fri Apr 22 16:43:54 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * infrun.c (wait_for_inferior): Move call to flush_cached_frames
        to after call to target_wait.  This means that flush_cached_frames
        can call target_terminal_ours if it wants to.
        * infrun.c (wait_for_inferior) [HAVE_NONSTEPPABLE_WATCHPOINT]: Add
        comment about why the code is dubious.

        * stabsread.c (read_type): Call read_type, not nonexistent
        os9k_read_type.

Fri Apr 22 14:25:36 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * remote-os9k.c (rombug_fetch_registers): set trace mode
        correctly.
        * remote-os9k.c (rombug_read_inferior_memory): cache data in
        buffer.
        * os9kread,c (read_os9k_psymtab): process file symbol to truncate
        extra info.
        * os9kread.c (os9k_read_ofile_symtab): proper casting of args
        passed to process_one_symbol.
        * stabsread.c (read_type): process os9k functio prototype.

Fri Apr 22 11:27:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * solib.c (symbol_add_stub): If so->textsection is NULL, don't
        dump core.

Thu Apr 21 07:45:49 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * utils.c (prompt_for_continue): Annotate prompt.
        (query): Annotate query.
        * printcmd.c (print_frame_args): Change syntax of argument
        annotation to make name and value part of a single group of
        annotations, not two separate groups.
        * cp-valprint.c (cp_print_value_fields): Likewise for fields.
        * valprint.c (val_print_array_elements): Change syntax of
        annotation to be more concise.
        * main.c, defs.h (command_line_input): New argument tells what
        string to include in the annotations.
        * symtab.c (decode_line_2), main.c (read_command_lines,
        command_loop): Change callers.

        * breakpoint.c (watch_command): Use (CORE_ADDR)0, not NULL, for
        target null pointer.
        * blockframe.c (find_frame_addr_in_frame_chain): Likewise.

        * printcmd.c (output_command): Annotate things we print here too.
        * printcmd.c (print_command_1): Add "value-history-value" annotation.
        * Move declaration of print_value_flags from defs.h to value.h.
        * main.c (command_line_input): Call wrap_here as well as gdb_flush.

Thu Apr 21 09:29:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * dbxread.c (read_dbx_dynamic_symtab):  Reinstall support for sun3,
        BFD handles sun3 dynamic relocations now.
        * elfread.c (elf_symtab_read, elf_symfile_read):  Handle dynamic
        symbol table.

Wed Apr 20 19:41:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * printcmd.c (print_command_1): Annotate the top-level expressions
        that we print.
        (print_frame_args): Annotate each argument.
        * printcmd.c, defs.h (print_value_flags): New function.
        * cp-valprint.c (cp_print_value_fields): Annotate each field.
        * valprint.c (val_print_array_elements): Annotate each array element.

Wed Apr 20 13:18:41 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * findvar.c (read_var_value):  Handle LOC_REPARM_ADDR case correctly,
        the register contains a pointer to the type, not the type itself.

Mon Apr 11 10:44:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * main.c (main): Accept --annotate=N option and make --fullname
        the same as --annotate=1.
        (command_line_input): Print annotatation before and after prompt.
        * blockframe.c (flush_cached_frames): Print annotation.
        * Rename frame_file_full_name to annotation_level and move it from
        symtab.h to defs.h.
        * source.c (identify_source_line): If annotation_level > 1,
        change output format.
        * breakpoint.c: Print annotation whenever a breakpoint changes.
        * main.c: New variable server_command.
        (command_line_input): Parse "server " and set server_command.
        (dont_repeat): Check server_command.

Wed Apr 20 08:37:16 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * xcoffread.c (xcoff_next_symbol_text): Don't return before
        updating raw_symbol and symnum.  Return a value in the case where
        we complained.

        * dstread.c, coffread.c: Don't define pending_blocks; buildsym.c
        takes care of it.
        * parse.c: Don't define block_found; it is defined in symtab.c.
        * parser-defs.h: Add comment regarding block_found.

Tue Apr 19 09:46:05 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * hppa-tdep.c (internalize_unwind_info): Delete unused indexp
        argument.

Mon Apr 18 13:18:56 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * dbxread.c (read_dbx_dynamic_symtab):  Relocate BFD symbols by
        section vma. Do not read dynamic relocs for sun3 executables to
        avoid BFD assertion message.

Mon Apr 18 10:08:07 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * nm-hppab.h (KERNEL_U_ADDR): Define.
        (FIVE_ARG_PTRACE): Likewise.
        (CANNOT_STORE_REGISTER): Likewise.
        * nm-hppah.h (KERNEL_U_ADDR): Define.
        (FIVE_ARG_PTRACE): Likewise.
        (CANNOT_STORE_REGISTER): Likewise.
        (NEED_TEXT_START_END): Likewise.

        * tm-hppah.h (NEED_TEXT_START_END): Delete definition.
        * xm-hppah.h (KERNEL_U_ADDR): Delete definition.
        (FIVE_ARG_PTRACE): Likewise.
        * xm-hppab.h (KERNEL_U_ADDR): Delete definition.
        (FIVE_ARG_PTRACE): Likewise.

        * hppa-tdep.c (read_unwind_info): Make static.
        (restore_pc_queue): Indirect through the target vector to
        reload the register state.

Sat Apr 16 22:20:51 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * paread.c (compare_unwind_entries): Delete function.  It's been
        moved into hppa-tdep.c.
        (read_unwind_info): Likewise.
        (pa_symfile_read): No longer call read_unwind_info.  The unwind
        tables will be read in as they are needed.

        * hppa-tdep.c (compare_unwind_entries): New function.
        (read_unwind_info, internalize_unwinds): Likewise.
        (find_unwind_entry): Read in unwind information on demand.

Fri Apr 15 11:53:46 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * source.c (DIRNAME_SEPARATOR): New macro, replaces all references
        to : in search path processing.
        * defs.h (qsort): Rename argument in prototype.
        * symtab.h (SAYMBOL_VALUE): Rename value field, avoids bugs in
        some compilers.
        * breakpoint.c, exec.c, mdebugread.c, mipsread.c, xcoffexec.c
        (false): Eliminate usages.

Fri Apr 15 11:35:19 1994  Steve Chamberlain  (sac@cygnus.com)

        * h8500-tdep.c (initialize_h8500_tdep, large_command):
        All references to value changed to value_ptrlage_command is now
        called big_command.
        All references to value changed to value_ptr.
        * remote-e7000.c (e7000_wait): Use target_waitstatus and SETSTOP
        * remote-hms.c (hms_wait): Timeout after five seconds.
        * ser-go32.c (dosasync_read): Poll if timeout < 0.
        * config/tm/tm-h8500.h (BEFORE_MAIN_LOOP_HOOK): Deleted.
        * config/sh/tm-sh.h (BREAKPOINT): Is now sleep opcode.

Thu Apr 14 07:01:56 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * procfs.c (procfs_wait): Protect watchpoint code with appropriate
        #ifdefs.
        (procfs_set_watchpoint, procfs_stopped_by_watchpoint): Likewise.

Wed Apr 13 14:52:46 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * breakpoint.h (enum bptype): Add bp_hardware_watchpoint and
        bp_watchpoint_scope breakpoints.
        (struct breakpoint): Add val_chain and related_breakpoint fields
        for use by watchpoints.

        * breakpoint.c (within_scope): Delete.  No longer used.
        (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Provide default definition.
        (target_{remove,insert}_watchpoint): Likewise.
        (can_use_hardware_watchpoint): New function.
        (remove_breakpoint): New function to remove a single breakpoint
        or hardware watchpoint.
        (insert_breakpoints): Handle insertion of hardware watchpoints.
        Store a copy of the value chain derived from the watchpoint
        expression.
        (remove_breakpoints): Simplify by using remove_breakpoint.
        (delete_breakpoint): Likewise.
        (watchpoint_check): Delete the watchpoint and watchpoint scope
        breakpoints when the watchpoint goes out of scope.  Save & restore
        the current frame after checking watchpoints.
        (breakpoint_init_inferior): Likewise (restarting the program
        makes all local watchpoints go out of scope).
        (bpstat_stop_status): Handle hardware watchpoints much like normal
        watchpoints. Delete the watchpoint and watchpoint scope breakpoint
        when the watchpoint goes out of scope.  Remove and reinsert all
        breakpoints before returning if we stopped when a hardware watchpoint
        fired.
        (watch_command): Use a hardware watchpoint when possible.  If
        watching a local expression, build a scope breakpoint too.
        (map_breakpoint_numbers): Also call given function for any
        related breakpoints.
        (disable_breakpoint): Never disable a scope breakpoint.
        (enable_breakpoint): Handle hardware breakpoints much like normal
        breakpoints, but recompute the watchpoint_scope breakpoint's
        frame and address  (if we have an associated scope breakpoint).
        (read_memory_nobpt): Handle hardware watchpoints like normal 
        watchpoints.  When necessary handle watchpoint_scope breakpoints.
        (print_it_normal, bpstat_what, breakpoint_1, mention): Likewise.
        (clear_command, breakpoint_re_set_one, enable_command): Likewise.
        (disable_command): Likewise.

        * blockframe.c (find_frame_addr_in_frame_chain): New function.
        Extern prototype added to frame.h

        * infrun.c (wait_for_inferior): Set current_frame and select
        a frame before checking if we stopped due to a hardare watchpoint
        firing.  Handle stepping over hardware watchpoints.
        (normal_stop): Remove unnecessary call to select_frame.

        * value.h (value_release_to_mark): Declare.
        * values.c (value_release_to_mark): New function.

        * procfs.c (procfs_wait): Add cases for hardware watchpoints.
        (procfs_set_watchpoint, procfs_stopped_by_watchpoint): New functions.

        * hppab-nat.c (hppa_set_watchpoint): New function.

        * config/pa/nm-hppab.h (STOPPED_BY_WATCHPOINT): Define.
        (HAVE_STEPPABLE_WATCHPOINT): Define.
        (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define.
        (target_{insert,delete}_watchpoint): Define.

        * config/mips/nm-irix4.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define.
        (STOPPED_BY_WATCHPOINT, HAVE_NONSTEPPABLE_WATCHPOINT): Likewise.
        (target_{insert,remove}_watchpoint): Likewise.

Mon Apr 11 19:21:27 1994  Stu Grossman  (grossman at cygnus.com)

        * xcoffread.c (read_xcoff_symtab):  Ignore symbols of class C_EXT,
        smtyp XTY_LD, sclass XMC_DS (external data segment label).  They
        often have the same names as debug symbols for functions, and
        confuse lookup_symbol().

Mon Apr 11 10:44:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * remote.c: Around redefinition of PBUFSIZE, adjust whitespace.
        * config/pa/tm-hppa.h (REGISTER_BYTES): Use 4 rather than
        REGISTER_RAW_SIZE (1).
        Together these changes work around a bug in HP's compiler.  Both
        seem to be necessary.

Mon Apr 11 09:18:24 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * paread.c (pa_symtab_read): Handle ST_STUB symbols and symbols
        with scope SS_EXTERNAL.  ST_ENTRY symbols in dynamic executables
        are type mst_solib_trampoline.

Fri Apr  8 17:14:37 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * config/m68k/es1800.mt: Change comments.

Fri Apr  8 17:14:37 1994  Rob Savoye  (rob@darkstar.cygnus.com)

        * config/m68k/monitor.mt (TDEPFILES): Don't include remote-es.o.

Fri Apr  8 15:35:30 1994  Stu Grossman  (grossman at cygnus.com)

        * lynx-nat.c:  Restore regmap structure for SPARC.  It's needed
        for core files.

Fri Apr  8 14:53:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * values.c (unpack_long): Remove obsolete comment about using a
        switch statement.

        * symfile.c (symbol_file_command): Add comments about command syntax.

Thu Apr  7 17:25:21 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
                          Jim Kingdon  (kingdon@cygnus.com)

        * infrun.c (IN_SOLIB_TRAMPOLINE):  Correct comment, trampolines
        are in the .plt section.
        * minsyms.c (lookup_solib_trampoline_symbol_by_pc,
        find_solib_trampoline_target):  New functions for handling
        stepping into -g compiled shared libraries.
        * symtab.h (lookup_solib_trampoline_symbol_by_pc,
        find_solib_trampoline_target):  Add prototypes.
        * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE):
        Define to handle stepping into  -g compiled shared libraries.
        * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE):  Define to handle
        stepping into  -g compiled shared libraries.

Thu Apr  7 17:22:54 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * configure.in:  Add mips-*-sysv4* support.
        * config/mips/mipsv4.mh, config/mips/mipsv4.mt,
        config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c:
        New files for MIPS SVR4 support.
        * Makefile.in:  Update for new mipsv4 files.
        * alpha-tdep.c (heuristic_proc_desc, find_proc_desc):  Use
        read_next_frame_reg to obtain the frame relative stack pointer.
        * mips-tdep.c (heuristic_proc_desc):  Use read_next_frame_reg to
        obtain the frame relative stack pointer.
        * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1):
        Handle stStatic and stStaticProc symbols in stabs-in-ecoff output
        by entering them into the minimal symbol table.
        * printcmd.c (print_scalar_formatted):  Do not try to unpack to
        a long for float formats.
        * solib.c:  Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not
        get defined in <link.h>.
        * solib.c (solib_add):  Add shared library sections to the section
        table of the target before adding the symbols.
        * partial-stab.h:  Relocate static and global functions.
        * dbxread.c (read_dbx_symtab):  Remove unused variable
        end_of_text_address.  Relocate text_addr when passing it
        to end_psymtab.

        For Alpha OSF/1 targets, enable gdb to set breakpoints in shared
        library functions before the executable is run. Retrieve dynamic
        symbols from stripped executables.
        * mipsread.c (read_alphacoff_dynamic_symtab):  New function.
        * mipsread.c (mipscoff_symfile_read):  Use it. Issue warning message
        if no debugging symbols were found.
        * alpha-tdep.c (alpha_skip_prologue):  Silently return the unaltered
        pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS
        is defined.
        * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS):  Define,
        OSF/1 has shared libraries.

Thu Apr  7 15:11:11 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * dbxread.c (read_dbx_dynamic_symtab): Adjust for recent changes
        to BFD handling of dynamic symbols.

Tue Apr  5 15:29:25 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * hppa-tdep.c (hppa_fix_call_dummy): If FUN is a procedure label,
        then gets its real address into FUN and its GOT/DP value into %r19.

        * tm-hppa.h (CALL_DUMMY): Use %r20, not %r19 as a temporary.

        * hppa-tdep.c (frameless_function_invocation): If no unwind
        descriptor was found, then assume this was not a frameless
        function invocation.
        (frame_saved_pc): If the saved PC is in a linker stub, then
        return the return address which the linker stub will return to.

        * xm-hppab.h: Never define USG.
        * xm-hppah.h: Always define USG.

Tue Apr  5 12:58:47 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        * values.c (unpack_long, value_from_longest),
        valarith.c (value_binop):  Allow TYPE_CODE_RANGE.

Fri Apr  1 14:04:34 1994  Jason Merrill  (jason@deneb.cygnus.com)

        * symfile.c (deduce_language_from_filename): .cpp is a C++ extension.

Fri Apr  1 00:44:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        For SVR4 targets, enable gdb to set breakpoints in shared
        library functions before the executable is run.
        * elfread.c (elf_symtab_read):  Handle symbols for shared library
        functions.
        * sparc-tdep.c (in_solib_trampoline):  Renamed to in_plt_section
        and moved to objfiles.c.
        * objfiles.c (in_plt_section):  Moved to here from sparc-tdep.
        * config/tm-sysv4.h (IN_SOLIB_TRAMPOLINE):  Use new in_plt_section.
        * config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE):  Removed,
        the new generic definition from tm-sysv4.h works for Solaris.

Wed Mar 30 16:14:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * elfread.c (elf_symtab_read): Change storage_needed,
        number_of_symbols and i to long.  Rename get_symtab_upper_bound to
        bfd_get_symtab_upper_bound.  Check for errors from
        bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
        * nlmread.c (nlm_symtab_read): Same changes.

Wed Mar 30 11:43:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * xcoffread.c (xcoff_next_symbol_text): New function.
        (read_xcoff_symtab): Set next_symbol_text_func to it.
        Move raw_symbol outside of read_xcoff_symtab.

        * remote.c (getpkt): Remove unused "out" label.

Wed Mar 30 09:15:42 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * breakpoint.c (print_it_normal): Allow GDB to notify the user
        about more than one watchpoint being triggered.

Wed Mar 30 08:24:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * config/m68k/tm-dpx2.h: Include tm-m68k.h not nonexistent tm-68k.h.

Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * blockframe.c (find_pc_partial_function):  mst_file_text
        symbols do not live in the shared library transfer table.
        * ch-exp.y (decode_integer_value, match_character_literal,
        match_bitstring_literal):  Guard tolower calls with isupper,
        tolower on old BSD systems blindly subtracts a constant.
        * dbxread.c (read_ofile_symtab):  Check for __gnu_compiled_* as
        well when determining the producer of the object file.
        * mdebugread.c (has_opaque_xref):  New function to check for
        cross reference to an opaque aggregate.
        * mdebugread.c (parse_symbol, parse_partial_symbols):  Do not
        enter typedefs to opaque aggregates into the symbol tables.
        * mdebugread.c (parse_external):  Remove skip_procedures argument,
        it has always been 1.  Remove code that handled stProc symbols,
        it was never executed and was wrong, as the index of a
        stProc symbol points to the local symbol table and not to the
        auxiliary symbol info. Update caller.
        * mdebugread.c (parse_partial_symbols):  Do not enter external
        stProc symbols into the partial symbol table, they are already
        entered into the minimal symbol table.
        * config/i386/tm-symmetry.h:  Clean up, it is now only used for Dynix.
        Remove all conditionals and definitions for ptx.
        I386_REGNO_TO_SYMMETRY moved to here from symm-tdep.c.
        Fix addresses of floating point registers in REGISTER_U_ADDR.
        STORE_STRUCT_RETURN now handles cc and gcc conventions.
        FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC,
        IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET defined to make backtracing through
        signal trampoline code work.
        * config/i386/xm-symmetry.h:  Clean up, it is now only used for Dynix.
        Remove all conditionals and definitions for ptx.
        Remove KDB definitions.
        * symm-nat.c (store_inferior_registers):  Fetch registers before
        storing them to obtain valid floating point control registers.
        Store fpu registers.
        * symm-nat.c (print_1167_control_word):  Dynix 3.1.1 defines
        FPA_PCR_CC_C0 and FPA_PCR_CC_C1, avoid duplicate case value.
        * symm-nat.c (fetch_inferior_registers, child_xfer_memory):
        Fix typos.
        * symm-nat.c (child_resume):  Update type of `signal' parameter.
        * symm-tdep.c (I386_REGNO_TO_SYMMETRY):  Moved to tm-symmetry.h.

Tue Mar 29 23:01:33 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * hppa-tdep.c (hppa_fix_call_dummy): Use an alternate method for
        calling import stubs for functions in shared libraries.

Tue Mar 29 21:14:04 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        * ch-exp.y:  Implement SIZE(mode_name) and SIZE(expression).

        * ch-lang.c (chill_is_varying_struct):  Magic string is
        was "<var_length>" is now "__var_length" (more portable).

Tue Mar 29 19:41:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * remote.c (getpkt): If we get a timeout, actually retry rather
        than just giving up the first time it happens.
        * remote.c: Document sequence numbers.
        (remote_store_registers): Change syntax of 'P' request so that it
        never looks like a sequence number.

Tue Mar 29 16:06:01 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * os9kread.c (record_minimal_symbol): add section_offset to
        relocate minimal symbol table.
        * os9kread.c (read_minimal_symbols): ditto.
        * os9kread.c (os9k_symfile_init): increase size of dbg and stb
        file names.
        * os9kread.c (read_os9k_psymtab): if there's no dbg file, just
        return. Also if file addr is 0 leave it 0, not to relocate.
        * remote-os9k.c (_initialize_remote_os9k): add 'set remotexon',
        'set remotexoff' and 'set remotelog' commands.

Tue Mar 29 12:38:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * remote.c (remote_store_registers): Add 'P' request to set an
        individual register.
        (remote_write_bytes, remote_read_bytes): Use %lx, not %x, to print
        a target address.

Sat Mar 26 07:05:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * config/sparc/tm-sparc.h: Define USE_REGISTER_NOT_ARG.
        * stabsread (define_symbol): If USE_REGISTER_NOT_ARG, go back to
        combining all 'p' and 'r' pairs into a LOC_REGPARM.

        * command.c (do_setshow_command, case var_string): Never add a
        space to the end of the string.
        * NEWS: Document this change.
        * .gdbinit: Add a space to the "set prompt" command.

Fri Mar 25 12:40:41 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        *  m3-nat.c, i386m3-nat.c, config/i386/i386m3.mh: Many minor
        changes to make it compile (it doesn't link yet).

        * buildsym.c (start_subfile, patch_subfile_names), demangle.c
        (set_demangling_style, set_demangling_command): Use savestring not
        strdup.  We were not dealing properly with a NULL return from
        strdup, and were not declaring strdup (the system header may or
        may not have it).

        * valprint.c (val_print): Remove inaccurate comment about what
        types can be stub types.

        * config/i386/ptx.mh (XDEPFILES): Add coredep.o.  Delete infptrace.o.
        * symm-nat.c (child_wait, _initialize_symm_nat, kill_inferior):
        Supply alternate version if ATTACH_DETACH is not defined.
        * ptx4-nat.c, config/i386/{nm-ptx4.h, ptx4.mh, ptx.mt, ptx4.mt,
        tm-ptx.h, tm-ptx4.h, xm-ptx.h, xm-ptx4.h}: New files.
        * configure.in: Recognize i[34]86-sequent-sysv4* host.

Fri Mar 25 10:14:03 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * hppa-tdep.c (skip_prologue): Do nothing if not at the beginning
        of a function.
        (skip_trampoline_code): Rewrite and add support for argument
        relocation stubs stubs, import/export stubs, calls through
        "_sr4export" and cascaded trampolines.

        * hppa-tdep.c (skip_prologue): Return "pc" not zero
        if no unwind descriptor is found.

        * tm-hppa.h (NUM_REGS): Bump to 128 registers.
        (REGISTER_NAMES): Add entries for "right-half" of FP registers.
        (REGISTER_RAW_SIZE, MAX_REGISTER_RAW_SIZE): Do not treat FP regs
        differently.  All registers are four bytes.
        (REGISTER_BYTES, REGISTER_BYTE): Simplify now that all registers are
        the same size.
        (REGISTER_VIRTUAL_TYPE): Use builtin_type_float for all FP regs.

        * hppa-tdep.c (pa_print_fp_reg): Update to print even numbered FP
        registers as both single and double values (fetching 2nd 32bit half
        as necessary).  Annotate each register printed with its precision.

        * paread.c (read_unwind_info): Fix off-by-one error.

Fri Mar 25 08:33:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * main.c (complete_command): Deal with it if arg is NULL.

Thu Mar 24 07:12:09 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * config/mips/tm-mips.h (SETUP_ARBITRARY_FRAME): Revise comment
        regarding using the PC--using the PC is necessary and all the
        FIXME comments in the world won't make it go away.

        * valops.c (value_at, value_at_lazy): Give error if we dereference
        a pointer to void.
        * gdbtypes.h: Fix comments regarding TYPE_CODE_VOID.
        * stabsread.c: Use 1, not 0, for TYPE_LENGTH of void types.

        * stabsread.c (patch_block_stabs): Add comment about what happens
        if the definition is in another compilation unit from the stab.

        * dbxread.c (end_psymtab): Add comment about empty psymtabs.

Wed Mar 23 07:50:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * main.c (complete_command): New command, from Rick Sladkey
        <jrs@world.std.com>.
        (symbol_completion_function): Don't declare rl_point and
        rl_line_buffer; they are now declared in readline.h.
        (show_commands): Don't declare history_base; it is declared in
        history.h.
        * command.c (lookup_cmd): Don't delete trailing whitespace.
        Reverts change of 14 May 1989.

Wed Mar 23 16:14:52 1994  Stu Grossman  (grossman at cygnus.com)

        * minsyms.c (prim_record_minimal_symbol):  Move section deduction
        code from prim_record_minimal_symbol_and_info() to here.  Callers
        of the latter can legitimately supply a section number of -1.

Wed Mar 23 07:50:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdbtypes.h, gdbtypes.c: Add comments regarding whether static
        member functions have an element in args for a (nonexistent) this
        pointer.

Tue Mar 22 20:12:53 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * config/pa/tm-hppao.h (NO_PC_SPACE_QUEUE_RESTORE): Define.

        * hppa-tdep.c (hppa_pop_frame): Do not restore the PC space
        queue if NO_PC_SPACE_QUEUE_RESTORE is defined.

        * stabsread.c (REG_STRUCT_HAS_ADDR): Accept additional argument
        for the structure's type.  All callers changed.

        * valops.c (call_function_by_hand): Check REG_STRUCT_HAS_ADDR
        for each structure argument rather than assuming it's either
        true or false for all structure arguments.

        * config/pa/tm-hppa.h (REG_STRUCT_HAS_ADDR): Depend only
        on the length structure passed, not the compiler used.

        * config/sparc/tm-sparc.h (REG_STRUCT_HAS_ADDR): Accept additional
        argument for the structure's type.

Tue Mar 22 15:28:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * values.c (set_internalvar): Don't set var->value until we are
        sure there won't be an error().

        * remote.c (get_offsets): Reinstate comment which was in
        remote_wait about use of SECT_OFF_TEXT and so on.

Mon Mar 21 13:11:30 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * symmisc.c (maintenance_check_symtabs):  New function to check
        consistency of psymtabs and symtabs.
        * symtab.h (maintenance_check_symtabs):  Add prototype.
        * maint.c:  Add new `maint check-symtabs' command.
        * config/i386/tm-i386aix.h, config/i386/tm-sun386.h,
        config/i386/tm-symmetry.h (REGISTER_CONVERT_TO_RAW):  Fix typo.
        * config/i386/tm-symmetry.h:  Make comment inside #if 0 a real
        comment.
        * config/i386/tm-symmetry.h (STORE_STRUCT_RETURN):  Cast argument
        to write_memory to avoid warnings from gcc.
        * config/i386/xm-symmetry.h:  Add missing #endif.
        * config/i386/nm-symmetry.h (NO_PTRACE_H):  Add for Dynix.
        * config/i386/symmetry.mt (TDEPFILES):  Add i386-tdep.o.
        * config/i386/symmetry.mh (NAT_FILE, NATDEPFILES):  Add.

Mon Mar 21 11:50:28 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * hppa-tdep.c (hppa_fix_call_dummy): Use value_ptr.
        (hppa_push_arguments): Likewise.

Mon Mar 21 11:02:51 1994  Stu Grossman  (grossman at cygnus.com)

        * alpha-tdep.c:  Gobs of changes (many imported from mips-tdep) to
        improve remote debugging efficiency.  Also fixed problems with
        doing function calls for programs with no entry points.
        * infcmd.c (run_stack_dummy):  Use CALL_DUMMY_ADDRESS instead of
        entry_point_address.
        * inferior.h (PC_IN_CALL_DUMMY):  ditto.
        * mdebugread.c (parse_symbol, parse_procedure, parse_external,
        parse_lines):  Pass section_offsets info to these routines so that
        we can relocate symbol table entries upon readin.
        * (psymtab_to_symtab_1):  Set symtab->primary to tell
        objfile_relocate to do relocations for our symbols.
        * (ecoff_relocate_efi):  New routine to relocate adr field of PDRs
        (which hang off of the symbol table).
        * Use prim_record_minimal_symbols_and_info instead of
        prim_record_minimal_symbols to supply section info to make minimal
        symbol relocations work.
        * minsyms.c (prim_record_minimal_symbols_and_info):  If section is
        -1, try to deduce it from ms_type.
        * objfiles.c (objfile_relocate):  Use ALL_OBJFILE_SYMTABS where
        appropriate.  Handle relocation of MIPS_EFI symbols special. Also,
        add code to relocate objfile->sections data structure.
        * remote.c (get_offsets):  Use new protocol message to acquire
        section offsets from the target.
        * (remote_wait):  Get rid of relocation stuff.  That's all handled
        by objfile_relocate now.
        * config/alpha/alpha-nw.mt (TM_FILE):  Use tm-alphanw.h.
        * config/alpha/tm-alpha.h:  Define CALL_DUMMY_ADDRESS, and
        VM_MIN_ADDRESS.
        * config/alpha/tm-alphanw.h:  DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.

Sun Mar 20 15:21:57 1994  Doug Evans  (dje@cygnus.com)

        * sparc-tdep.c (sparc_frame_find_save_regs): Use REGISTER_RAW_SIZE
        instead of 4.
        * sp64-tdep.c (target_ptr_bit, set_target_ptr_bit): Deleted,
        can no longer set this at run time.
        * config/sparc/sp64.mt (SIMFILES): Use remote-sim.o now.
        (TM_CLIBS): Define to -lm, the simulator uses the sqrt() function.
        * config/sparc/tm-sp64.h (FPS_REGNUM, CPS_REGNUM): Define (so
        sparc-tdep.c compiles).
        (TARGET_PTR_BIT): Must be a constant now, fix at 64.

Sat Mar 19 08:51:12 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * config/m68k/{cisco.mt,tm-cisco.h}: New files.
        * Makefile.in (ALLPARAM, ALLCONFIG): Add them.
        * configure.in: Recognize m68*-cisco*-*.

        * Makefile.in (TAGS): Use variables directly, rather than using
        find, to locate TM_FILE, XM_FILE, and NAT_FILE.  This is faster
        and means that these filenames no longer need be unique across all
        the config/* directories.
        * configure.in: Put the config/*/ into TM_FILE, etc.

        * m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
        and trapv exceptions.

        * target.h (struct section_table), objfiles.h (struct obj_section):
        Change name of field sec_ptr to the_bfd_section.  More mnemonic
        and avoids the (sort of, for the ptx compiler) name clash with
        the name of the typedef.
        * exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
        solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.

        * utils.c: Include readline.h.
        * Makefile.in (utils.o): Add dependency.

        * remote.c (getpkt): Add support for run-length encoding.

Fri Mar 18 19:11:15 1994  Steve Chamberlain  (sac@jonny.cygnus.com)

        * utils.c (prompt_for_continue): Call readline, not gdb_readline.

Fri Mar 18 10:25:55 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * dstread.c (record_minimal_symbol): New arg objfile.  Pass it to
        prim_record_minimal_symbol.
        Callers: Pass it.

        * regex.c (EXTEND_BUFFER): Adjust pointers within buffer by
        computing their offset from the start of the old buffer and adding
        to the new buffer, rather than by assuming we can add the
        difference between the old buffer and the new buffer (it might not
        fit in an int).  Merge in cosmetic differences from emacs regex.c
        version of this macro.

Wed Mar 16 15:28:54 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * Makefile.in (install-only): Fix use of program_transform_name.

Wed Mar 16 07:18:43 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * printcmd.c: Remove "set print fast-symbolic-addr off" command.
        The bug which it worked around was fixed on 25 Feb 94 in coffread.c,
        so I'm nuking the command.
        * symtab.c (find_addr_symbol): Comment out, no longer used.

        * main.c (main): Don't init_source_path for the -cd argument.  Now
        that source_path doesn't contain the current_directory from when
        GDB started up, init_source_path is no longer useful (and is
        harmful because it clobbers a source_path set in $HOME/.gdbinit).

        * TODO: Remove item about line numbers being off.  It is useless
        and confusing without a reproducible test case (it mentions
        proceed(), but I was able to step through proceed without trouble).

Tue Mar 15 13:39:23 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        For Sunos 4.x targets, enable gdb to set breakpoints in shared
        library functions before the executable is run. Retrieve dynamic
        symbols from stripped executables.
        * symtab.h (minimal_symbol_type):  Add mst_solib_trampoline type.
        * parse.c (write_exp_msymbol), symmisc.c (dump_msymbols),
        symtab.c (list_symbols):  Handle mst_solib_trampoline.
        * minsyms.c (lookup_minimal_symbol):  Handle mst_solib_trampoline
        for all targets, remove IBM6000_TARGET dependencies.
        * dbxread.c (read_dbx_dynamic_symtab):  New function.
        * dbxread.c (dbx_symfile_read):  Use it.
        * dbxread.c (SET_NAMESTRING):  Set namestring to
        "<bad string table index>" instead of "foo" if the string index is
        corrupt.
        * xcoffread.c (read_xcoff_symtab):  Use mst_solib_trampoline instead
        of mst_unknown.
        * symtab.c (list_symbols):  Take from_tty as parameter and pass it
        to break_command. Handle mst_file_* minimal symbol types.
        * config/i386/tm-i386bsd.h: Give just macro name, not args, to #undef.

Tue Mar 15 11:40:43 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * c-exp.y(yylex): fix potential memory overflow.

Tue Mar 15 10:33:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * environ.c (set_in_environ): Eliminate special handling of PATH and
        GNUTARGET.
        * putenv.c: Removed, conflicts with system declaration of
        putenv on RS/6000 running AIX 3.2.5, and above change makes it
        unnecessary. 
        * Makefile.in: Change accordingly.
        * procfs.c (procfs_create_inferior): Change comment accordingly.

Tue Mar 15 10:05:27 1994  Jim Kingdon  (kingdon@cygnus.com)

        * rs6000-tdep.c: Change value to value_ptr.

Sun Mar 13 09:45:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * i386m3-nat.c: Include floatformat.h.
        (get_i387_state): Use memset not bzero.

        * Version 4.12.3.

        * Makefile.in: Enable commented out getopt_h, bfd_h, etc.  Change
        ieee-float.h to floatformat.h.

        * valprint.c (val_print_string): Ignore error if the error
        happened after a terminating '\0'.

        * c-valprint.c (c_val_print): Never add 1 to return value from
        val_print_string; just return what it returns.

        * target.h (enum target_signal): Add TARGET_SIGNAL_FIRST, for
        looping through all of the enums.
        * infrun.c (signals_info): Use it.

Fri Mar 11 08:08:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * main.c (main): When printing warning about bad baud rate, don't
        use warning(); it relies on current_target which isn't set up yet.

        * breakpoint.c (_initialize_breakpoint): Update docstring for
        tbreak to match what the code actually does.  Don't mention tbreak
        in docstrings for "enable once" or "enable breakpoints once".

Thu Mar 10 08:52:38 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * symfile.h (ADD_PSYMBOL_VT_TO_LIST): Don't put a semicolon after
        while (0).  That defeats the whole purpose of using do . . . while (0).
        * mdebugread.c (parse_partial_symbols): Don't use ?: expression as
        list for ADD_PSYMBOL_TO_LIST; the macro takes its address and
        using a ?: expression as an lvalue is not portable.

        * stabsread.c (define_symbol): If REG_STRUCT_HAS_ADDR, also
        convert a LOC_ARG to a LOC_REF_ARG.  Update code which combines
        'p' and 'r' symbol descriptors into a single symbol to look for a
        LOC_REF_ARG.
        * README, config/sparc/tm-sparc.h: Update comments.

Wed Mar  9 21:43:24 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * mdebugread.c (parse_type):  Do not complain for types with
        an `indexNil' aux index, these are simply undefined types.
        Remove indexNil check from caller of parse_type.
        * mdebugread.c (parse_partial_symbols):  Do not enter
        stGlobal, scCommon symbols into the minimal symbol table, their
        value is the size of the common, not its address.
        Handle scInit, scFini, scPData and scXData sections.
        Use minimal symbol type mst_file_* for stLabel symbols, instead of
        mst_*.
        Enter stProc symbols into the global_psymbols list once, not into
        the static_psymbols_list.
        Get rid of dummy psymtab if it is empty, to allow proper detection
        of stripped executables.
        * mdebugread.c (cross_ref):  Allow cross references to Fortran
        common blocks.

Wed Mar  9 15:23:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * stabsread.c (common_block_end, fix_common_block): Stash the
        struct pending * in the SYMBOL_TYPE, not the SYMBOL_NAMESPACE, so
        as to not assume that a pointer fits in an enum.

Wed Mar  9 18:56:36 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * os9kread.c (fill_sym): check compiler verion number for pre-
        UltraC compiler.
        * os9kread.c (os9k_process_one_symbol): address of symbol is
        relative to section not module.
        * stabsread.c (define_symbol): add symbol type 's' as local
        symbol for os9k.
        * remote-os9k.c: add command 'set monitor_log' to turn on or off
        monitor logging.
        * remote-os9k.c: fix bug in delete breakpoint, single step trace.
        * remote-os9k.c: fix bug in 'set remotebaud' function.
        * remote-os9k.c (rombug_link): minimize checking so to improve
        speed.
        * symfile.c (symbol_file_command): check if failed to link, also make
        the command be able to accept more than one filenames.
        * target.c (target_link): check if failed to link with rombug.
        * config/i386/tm-i386os9k.h : add #define DECR_PC_AFTER_BREAK 0.

Wed Mar  9 15:23:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * remote-es.c (es1800_child_ops): Don't declare it static.

Tue Mar  8 11:42:39 1994  Jim Kingdon  (kingdon@cygnus.com)

        * config/i386/tm-i386v4.h: Give just macro name, not args, to #undef.

Tue Mar  8 06:56:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * dbxread.c: New variable lowest_text_address.
        (record_minimal_symbol, read_dbx_symtab): Set it.
        (read_dbx_symtab): Use lowest_text_address + text_size instead of
        end_of_text_address.
        * config/gould/tm-pn.h: Add comment regarding END_OF_TEXT_DEFAULT.

        * dbxread.c (end_psymtab): Remove old and commented out
        capping_global and capping_static.  Fix comments regarding
        N_SO_ADDRESS_MAYBE_MISSING to match the real name of the macro.

        * parser-defs.h: Add "extern" to start of variable declarations so
        we don't end up with commons.
        * parse.c: Define these variables.

        * irix5-nat.c (find_solib): Cast o_path to CORE_ADDR when using it
        as one.

Mon Mar  7 13:00:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * alpha-tdep.c: Change value to value_ptr.

Sun Mar  6 17:36:53 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * solib.c (elf_locate_base):  New function to locate the address
        of the dynamic linker's runtime structure in the dynamic info section.
        * solib.c (locate_base):  Use it instead of iterating over the list
        of mapped address segments.
        * solib.c (look_for_base, bfd_lookup_symbol):  Removed, no longer
        necessary.

Fri Mar  4 09:50:47 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * hppa-tdep.c (pc_in_linker_stub): Move decl to beginning of file.
        (pc_in_interrupt_handler): New function.  Also add PARAM decl.
        (find_proc_framesize): Deal with HPUX setting SAVE_SP bit for
        signal trampoline and interrupt routines.
        (frame_saved_pc): Handle signal trampolines and interrupt routines.
        (frame_chain, frame_chain_valid): Likewise.
        (hppa_frame_find_saved_regs): Likewise.  Also deal with special
        saved regs convention for SP.
        
        * tm-hppa[bho].h: FRAME_FIND_SAVED_PC_IN_SIGTRAMP): Define.
        (FRAME_BASE_BEFORE_SIGTRAMP): Define.
        (FRAME_FIND_SAVED_REGS_IN_SIGTRAMP): Define.

        * tm-hppah.h (IN_SIGTRAMP): Define.

Thu Mar  3 12:41:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * ch-exp.y (match_simple_name_string): Accept '_' as well as an
        alphabetic character as the start of a name.

        * sparclite/Makefile.in (all install): Build and install aload.

        * configure.in: Accept i[34]86-*-*sysv32 because that is what
        config.guess and config.sub produce.

        * mips-tdep.c: Change value to value_ptr.

Wed Mar  2 09:17:55 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * breakpoint.c, breakpoint.h, c-valprint.c, ch-valprint.c,
        cp-valprint.c, eval.c, expprint.c, findvar.c, language.c,
        objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c,
        valarith.c, valops.c, valprint.c, value.h, values.c: Replace
        value with value_ptr.  This is for the ptx compiler.
        * objfiles.h, target.h: Don't declare a "sec_ptr" field using a
        "sec_ptr" typedef.
        * symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff.
        #if 0 i386_float_info.
        * symm-tdep.c (round): Remove.  Also remove sgttyb.
        * symm-tdep.c: Remove lots of stuff which duplicates stuff from
        i386-tdep.c.  Remove register_addr and ptx_coff_regno_to_gdb.
        * i386-tdep.c (i386_frame_find_saved_regs): Put in
        I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix
        someday.
        * config/i386/nm-symmetry.h: Change KERNEL_U_ADDR.  Move
        stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to
        symm-nat.c.  Define CHILD_WAIT and declare child_wait().
        * config/i386/tm-symmetry.h: Remove call function stuff; stuff in
        tm-i386v.h is apparently OK.
        * config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not
        HAVE_TERMIO.  Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and
        USE_O_NOCTTY.

Wed Mar  2 11:31:08 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * osfsolib.c (xfer_link_map_member): Update to use new
        target_read_string interface.

Wed Mar  2 09:17:55 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * infrun.c (wait_for_inferior): In checking
        remove_breakpoints_on_following_step, check
        through_sigtramp_breakpoint as well as step_resume_breakpoint.

Tue Mar  1 16:22:56 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * os9kread.c (os9k_process_one_symbol): Rename
        VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK.
        * symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not
        (CORE_ADDR)0, from target_link, since that is what it uses.
        Process name at end, not during parsing (like we did before Kung's
        change), so that -readnow and -mapped can appear anywhere.
        Make text_relocation a local variable.
        * config/i386/i386os9k.mt: Fix comment.
        * Makefile.in (ALLDEPFILES): Add remote-os9k.c.
        * os9kread.c: Put "comments" after #endif inside /* */.
        * stabsread.h: Add os9k_stabs variable.
        * stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol):
        Set it.
        * stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol
        descriptor in global_symbols not local_symbols.
        (read_type): If os9k_stabs, accept 'c', 'i', and 'b' type
        descriptors.
        (read_type): If os9k_stabs, accept function parameters after 'f'
        type descriptor.
        (read_array_type): If os9k_stabs, don't expect index type and
        expect lower and upper to be separated by ',' not ';'.
        (read_enum_type): If os9k_stabs, read a number before the first
        enumeration constant.
        (os9k_init_type_vector): New function.
        (dbx_lookup_type): Call it when starting new type vector.
        * config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION.
        * (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol.
        * os9kstab.c: Removed.
        * Makefile.in: Update accordingly.
        * objfiles.c (objfile_relocate_data): Removed.
        * remote-os9k.c (rombug_wait): Call objfile_relocate
        not objfile_relocate_data.
        * objfiles.h, objfiles.c: Remove find_pc_objfile.
        * remote-os9k.c (rombug_wait): Call find_pc_section not
        find_pc_objfile.
        * main.c (quit_command): Check inferior_pid; revert Kung change.
        * remote-os9k.c (rombug_create_inferior): Set inferior_pid.

Tue Mar  1 14:56:14 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * os9kread.c: New file to read os9000 style symbo table.
        * os9kstab.c: new file to read os9000 style stabs.
        * remote-os9k.c: remote protocol talking to os9000 rombug monitor.
        * objfiles.c (find_pc_objfile): new function to search objfile
        from pc.
        * objfiles.c (objfile_relocate_data): new function to relocate
        data symbols in symbol table.
        * objfiles.h: Add two aux fields in struct objfile to handle
        multiple symbol table files situation like in os9000.
        * symfile.c: Change so 'symbol-file' command can handle multiple
        files. Also call target_link() to get relocation infos.
        * target.c (target_link): new function to get relocation info when
        a symbol file is requested to load.
        * main.c (quit_command): take out 'inferior_pid != 0' condition,
        because in cross mode there's no inferior pid, bit they need to
        be detached.
        Makefile.in: add os9kread.c os9kstab.c and .o's.
        configure.in: add i386os9k target.
        config/i386/i386os9k.mt: new add.
        config/i386/tm-i386os9k.h: new add.

Tue Mar  1 13:16:10 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP):  Handle ucbsigvechandler.
        * sparc-tdep.c (sparc_frame_saved_pc):  Handle ucbsigvechandler.

Tue Mar  1 11:54:11 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * target.c, target.h (target_read_string): Provide error detection to
        caller.  Put string in malloc'd space, so caller need not impose
        arbitrary limits.
        * solib.c (find_solib): Update to use new interface.
        * irix5-nat.c (find_solib): Read o_path from inferior
        (clear_solib): Free storage for o_path.
        * valprint.c (val_print_string): Add comments.

Mon Feb 28 23:54:39 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * symtab.c (decode_line_1):  Handle the case when skip_quoted does not
        advance `p'.

Mon Feb 28 12:40:46 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * value.h (struct value): Add modifiable field.
        * values.c (allocate_value, record_latest_value, value_copy): Set it.
        (record_latest_value): Don't mess with VALUE_LVAL of value.
        * valops.c (value_assign): Check it.  Reword existing error
        message on not_lval.

        * mips-tdep.c (mips_step_skips_delay), config/mips/tm-mips.h
        (STEP_SKIPS_DELAY): Added.
        * infrun.c (proceed) [STEP_SKIPS_DELAY]: Check for a breakpoint in
        the delay slot.

        * valprint.c (val_print_string): If errcode is set, always print
        an error, regardless of force_ellipsis.  In the non-EIO case,
        just print the error message rather than calling error().  Don't
        access *(bufptr-1) if bufptr points to the start of the buffer.
        When looking for '\0', don't increment bufptr and addr if bufptr
        started out already at limit.  If an error happens on fetching the
        first character, don't print the string.

Sun Feb 27 21:05:06 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * config/m68k/tm-apollo68b.h: Remove HAVE_68881 define; it is
        obsolete. 

        * i387-tdep.c, i386-tdep.c i386v-nat.c, i386aix-nat.c,
        i386m3-nat.c, config/m68k/tm-m68k.h, i960-tdep.c
        config/i960/tm-i960.h, remote-nindy.c, config/m88k/tm-m88k.h,
        m88k-tdep.c: Use floatformat.h instead of ieee-float.h.
        * sparc-tdep.c: Remove now-obsolete ieee-float.h stuff
        * findvar.c: Update comment regarding ieee-float.h.

Sun Feb 27 21:39:48 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * config/i386/tm-i386v4.h (I386V4_SIGTRAMP_SAVED_PC, IN_SIGTRAMP,
        FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
        Define to make backtracing through the various sigtramp handlers
        work.
        * i386-tdep.c (i386v4_sigtramp_saved_pc):  New routine to fetch
        the saved pc from ucontext on the stack for SVR4 signal handling.

Fri Feb 25 09:41:11 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * remote.c, remote-mon.c, remote-utils.c, remote-utils.h,
        target.h, remote-es.c, remote-nindy.c: Don't set baud rate if
        baud_rate is -1.  Remove sr_get_baud_rate and sr_set_baud_rate;
        just use the global variable itself.  When printing baud rate,
        don't print a baud rate if baud_rate is -1.

        * coffread.c (read_coff_symtab): Pass mst_file_* to
        record_minimal_symbol for C_STAT symbols.  Put C_EXT and C_STAT
        symbols in the minimal symbols regardless of SDB_TYPE.

Thu Feb 24 08:30:33 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * breakpoint.h (enum bptype): New type bp_through_sigtramp.
        (bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP.
        * breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP
        if we hit a bp_through_sigtramp breakpoint.  Remove kludge which
        ignored bs->stop for a bp_step_resume breakpoint.
        * infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint
        which performs one (the check_sigtramp2 one) of the functions
        which had been handled by the step_resume_breakpoint.  For each
        use of the step_resume_breakpoint, make it still use the
        step_resume_breakpoint, use the through_sigtramp_breakpoint, or
        operate on both.
        Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what.
        When setting the frame address of the step resume breakpoint, set
        it to the address for frame *before* the call instruction is
        executed, not after.

        * mips-tdep.c (mips_print_register): Print integers using
        print_scalar_formatted rather than duplicating all the
        CC_HAS_LONG_LONG and so on.
        (mips_push_dummy_frame): Use read_register_gen rather than using
        read_register and then putting it back in target format with
        store_unsigned_integer.  If registers are more than 4 bytes, give
        an error rather than have some registers overwrite other
        registers.
        #if 0 unused include of opcode/mips.h.

        * symfile.h: Don't declare arguments for coff_getfilename.

        * defs.h: Revert Kung change regarding FORCE_LONG_LONG.

Thu Feb 24 08:06:52 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * configure.in (hppa*-*-osf*): New configuration.
        * config/pa/hppaosf.mt: New target makefile fragment.
        * config/pa/tm-hppao.h: New target include file.

Thu Feb 24 04:29:19 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * exec.c (print_section_info):  Print entry point for exec_bfd only.
        * ser-unix.c (wait_for):  Fix typo in HAVE_TERMIO case.
        * dwarfread.c:  Remove second inclusion of <sys/types.h>, which
        causes problems if <sys/types.h> has no multiple inclusion protection.

Wed Feb 23 16:28:55 1994  Jeffrey A. Law  (law@cygnus.com)

        * tm-hppa.h (CALL_DUMMY): Add two NOP instructions to the end of
        the call dummy to avoid kernel bugs in HPUX, BSD, and OSF1.
        (CALL_DUMMY_LENGTH): Changed accordingly.

Wed Feb 23 16:21:25 1994  Stu Grossman  (grossman at cygnus.com)

        * sparc-stub.c (trap_low):  Make trap handler work for arbitrary
        numbers of register windows.

        * sparclite/hello.c:  Add factorial function for testing.
        * salib.c:  Use macros instead of constants for I/O addresses to
        make 931 support easier.
        * sparclite.h:  Change constraint for LOC to "rJ" to force use of
        register in sta/lda instructions.

Wed Feb 23 10:39:18 1994  Jim Kingdon  (kingdon@rtl.cygnus.com)

        * dbxread.c (process_one_symbol): Set
        block_address_function_relative for COFF like we do for ELF and SOM.

Sat Feb 19 03:17:32 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * mdebugread.c (new_psymtab):  Pass in section_offsets and set
        them in the pst.
        * mdebugread.c (handle_psymbol_enumerators):  New function to enter
        the enumerators of an ecoff enum into the partial symbol table.
        * mdebugread.c (parse_partial_symbols):  Call it.
        * symfile.c (reread_symbols):  Initialize objfile->*_psymbols.next.
        * symmisc.c (dump_psymtab):  Fix typo, clean up output of section
        offsets. Cast psymtab->read_symtab to PTR before passing it to
        gdb_print_address.
        * i386-tdep.c (i386_skip_prologue):  Skip over instructions that
        set up the global offset table pointer in pic compiled code.
        * config/mips/tm-mips.h (FIX_CALL_DUMMY):  For big endian targets,
        error() on TYPE_CODE_FLT arguments whose size is greater than 8,
        swap all other TYPE_CODE_FLT arguments as mips_push_arguments
        ensures that floats are promoted to doubles before they are pushed
        on the stack.

Fri Feb 18 23:12:59 1994  Stu Grossman  (grossman at cygnus.com)

        * sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h:
        Fixup cache_on and flush_i_cache so that they work for both the
        930 and 932 processors.  Rewrite most low level funcs (uart
        access & cache stuff) to use new ASI access macros in sparclite.h.
        Also make it easy to access second serial port.

Fri Feb 18 22:17:33 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * hp300ux-nat.c: Don't incloude <sys/dir.h>, <sys/ioctl.h>, or
        <sys/stat.h>; not needed.

Fri Feb 18 08:26:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * stack.c (print_frame_info): In "pathological" case, don't
        distrust the line number information.

Fri Feb 18 16:51:14 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * mips-tdep.c (mips_print_register): handle 64 bits register.
        * valprint.c (print_longest): fix a bug in printing 64 bits value.

Fri Feb 18 08:26:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * Version 4.12.2.

        * Makefile.in (install): Do the sed for program_transform_name
        ourselves instead of worrying about INSTALL_XFORM.  This enables
        users to override INSTALL_PROGRAM in the standard way.

        * Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
        depend on Makefile.in.

        * defs.h, valprint.c: Make longest_to_int a function not a macro.
        Only test against INT_MIN if a LONGEST is bigger than an int.

        * README: Change GhostScript to Ghostscript.

Fri Feb 18 07:30:55 1994  Jim Kingdon  (kingdon@cygnus.com)

        * config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}:
        Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14
        character file names.
        * Makefile.in (ALLPARAM): Add these files.

        * config/mips/littlemips64.mt: Rename to mipsel64.mt for 14
        character file names.
        * Makefile.in: Add Kung's new mips64 files.

Thu Feb 17 17:25:47 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf,
        mips64el-*-ecoff and mips64-big-*.
        * defs.h: get rid of FORCE_LONG_LONG.
        * mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction
        parsing. Change register size to be MIPS_REGSIZE.

Thu Feb 17 09:30:22 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c, 
        osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c, 
        xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.

Fri Feb 11 21:47:24 1994  Steve Chamberlain  (sac@sphagnum.cygnus.com)

        * remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust.
        (remove_commands, add_commands): Add/remove hms-drain when target
        is connected.

Fri Feb 11 16:11:38 1994  Stu Grossman  (grossman at cygnus.com)

        * configure.in:  Add Lynx/rs6000 support.
        * lynx-nat.c:  Clean up some Sparc stuff.  Clean up ptrace error
        messages.  Add rs6000 support.  Don't try to modify unwritable
        registers.
        * rs6000-nat.c:  Move lots of native dependent stuff (like core
        file support) from rs6000-tdep.c & xcoffexec.c to here.
        * rs6000-tdep.c:  Move native dependent stuff to nat.c.
        * xcoffexec.c:  Move native dependent stuff to nat.c.
        * config/rs6000/nm-rs6000.h:  Move defs of SOLIB_* macros to here
        from tm file.
        * config/rs6000/tm-rs6000.h:  Remove defs of SOLIB_* funcs, cuz they're
        really native.
        * config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
        New files to support Lynx/rs6000.

Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * README:  Remove note about gcc warnings on alpha, these should be
        gone now.
        * c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c, 
        m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
        remote-utils.c, stabsread.c:  Include <string.h>.
        * regex.c:  Include "defs.h", change re_comp argument to const char *.
        * infptrace.c (fetch_register, store_inferior_registers):  Change
        regaddr to type CORE_ADDR.
        * config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
        Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.

Mon Feb  7 09:21:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * symtab.h: Always define BYTE_BITFIELD to nothing.

Mon Feb  7 08:44:17 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
        * configure.in: Remove comment about m68k-em.mt.
        * Makefile.in: Remove references.

Mon Feb  7 08:22:42 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
        BFD_HOST_64_TYPE.

Sun Feb  6 06:55:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * target.c (target_preopen): If target_kill doesn't remove the
        target from the stack, use pop_target to do it.

        * coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
        of TYPE_CODE_PTR or TYPE_CODE_FUNC types.  This parallels similar
        changes to stabsread.c from summer 1993.

        * remote-udi.c (udi_files_info): If prog_name is NULL, just skip
        printing the program, rather than passing NULL to printf.
        (udi_detach): Set udi_session_id to -1 so that udi_close doesn't
        try to call UDIDisconnect again.  Print better message.
        (udi_kill): Just call UDIDisconnect ourselves, rather than doing
        it via udi_close.
        (udi_create_inferior): If udi_session_id is negative, open a new
        TIP rather than giving an error.

        * config/mips/mipsm3.mh, config/i386/i386m3.mh,
        config/ns32k/ns32km3.mh: Define NAT_FILE.
        * config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
        (it was inconsistent and namespace-wrong) to NM_M3_H.
        * m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
        (m3_open): New function.
        (m3_ops): Use it.
        * TODO: Update Mach section.

        * Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.

Sun Feb  6 13:26:21 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        * printcmd.c (printf_command):  Add missing single-letter
        backslash-escape sequences, and improve error message.

Sun Feb  6 06:55:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * corelow.c (solib_add_stub, core_open): Pass address of from_tty
        rather than trying to shove an int into a pointer and back out
        again.  This avoids compiler warnings.

        * defs.h (alloca): Declare as void *, not char *, on hpux.
        Don't prototype it, just declare the return type.

Sun Feb  6 03:25:41 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * config/i386/tm-sun386.h, config/i386/tm-symmetry.h
        (REGISTER_CONVERT_TO_RAW):  Add missing backslash.

Sat Feb  5 08:03:41 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
        ZERO_REGNUM, just read it as zero without talking to the board.

        * config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
        backslash.
        * i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
        to store_floating, not nonexistent variable len.

        * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
        New functions.
        (mips_store_word): Change calling convention to return errors, and
        to provide old contents if the caller wants it.
        (mips_xfer_memory): Deal with errors from mips_store_word.
        * config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
        define now that remote-mips.c doesn't use BREAKPOINT.

        * remote-mips.c (mips_create_inferior): Call warning if arguments
        specified, and then execute "set args" command.  Call error, not
        mips_error, if executable file not specified.

        * remote-e7000.c: Replace "snoop" command (e7000_noecho) with
        remote_debug.

        * config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
        to unsigned int.

Sat Feb  5 05:27:05 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * value.h (print_longest):  Rename "value" to "val" in prototype
        declaration because some compilers don't like arguments whose
        names are the same as types.
        * remote.c (remote_xfer_memory):  Cast "myaddr" to unsigned char *
        before passing it to remote_*_bytes.

Fri Feb  4 15:53:18 1994  Steve Chamberlain  (sac@cygnus.com)

        * h8500-tdep.c (saved_pc_after_call): The size of the
        pc is memory model dependent. (segmented_command,
        unsegmented_command, _initialize_h8500_tdep): New commands to
        change memory model.
        * remote-e7000.c (_initialize_remote_e7000): Change name of snoop
        command.
        * remote-hms.c (hms_load): Remove breakpoints when loaded.
        (hms_wait): Use new status structure
        (hms_open): Push the target here. (hms_before_main_loop): Not
        here.  (supply_val, hms_fetch_register, hms_store_register):  Cope
        with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
        * sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
        all registers in a compact way.

Fri Feb  4 07:41:13 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
        as CORE_ADDR to match definition in rs6000-tdep.c.

Fri Feb  4 01:14:20 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * dwarfread.c (process_dies):  Skip nested TAG_compile_unit DIEs.
        * dwarfread.c (add_partial_symbol):  Do not enter opaque aggregate
        definitions into the psymtab.

Thu Feb  3 12:38:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * m68k-stub.c: Treat mc68332 like mc68020 most places.  Provide
        a special exceptionSize for the 68332.

        * remote-udi.c (udi_attach): If no arguments, print error.

Thu Feb  3 17:34:05 1994  Fred Fish  (fnf@cygnus.com)

        * Makefile.in (VERSION):  Bump to 4.12.1
        * NEWS, README:  Update to match 4.12 release.

Thu Feb  3 12:38:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * command.c (empty_sfunc): New function.
        (add_set_cmd): Use it instead of not_just_help_class_command.
        (not_just_help_class_command): Change calling convention back to
        what it was before yesterday's change.

        * stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
        of the type if present.

Wed Feb  2 11:16:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * printcmd.c (decode_format): Don't blithely set the size for
        an address to 'w'.  Make it 'g' or 'h', depending on TARGET_PTR_BIT.

        * defs.h: Just typedef CORE_ADDR to bfd_vma.  Include bfd.h.
        If BFD64, make a LONGEST a BFD_HOST_64_BIT.
        * defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
        always just check against INT_MIN and INT_MAX (this also fixes things
        if sizeof (long) > sizeof (int), e.g. Alpha).
        * config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
        Don't define LONGEST or BUILTIN_TYPE_LONGEST.
        * gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
        BUILTIN_TYPE_UNSIGNED_LONGEST.
        * language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
        longest_int and longest_unsigned_int.
        * value.h (struct value): Just align to LONGEST, rather than worrying
        about CC_HAS_LONG_LONG.
        * valarith.c (value_binop): Figure out type ourself based on
        sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST.  The
        point is that we don't depend on CC_HAS_LONG_LONG anymore.
        * valprint.c (val_print_type_code_int): Just call
        extract_unsigned_integer directly, rather than going through
        unpack_long.
        * printcmd.c (decode_format): Remove code which would sometimes
        change 'g' size to 'w' for integers.  print_scalar_formatted handles
        printing huge integers well enough, thank you.

        * command.c (add_set_cmd, not_just_help_class_command): Change
        to make this the sfunc, not cfunc, since that is how we call it.
        * command.h: Comment difference between sfunc and cfunc.
        * demangle.c (set_demangling_command): Add third arg since that
        is how it is called.
        (_initialize_demangler): Use sfunc, not cfunc, for
        set_demangling_command, since that is how it is called.
        Remove show_demangling_command; it has no effect.

        * command.c (shell_escape): Report errors correctly (with error
        message from strerror).

Wed Feb  2 14:35:41 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
        x_scnlen.l rather than x_scnlen to match corresponding change in
        coff/internal.h.

Wed Feb  2 11:16:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdbtypes.h, ch-typeprint.c, ch-valprint.c:
        Change comments regarding TYPE_CODE_BOOL.
        * language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
        regardless of the language.
        (value_true): Just call value_logical_not regardless of language.
        * coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
        Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
        * language.h: Improve comment for la_builtin_type_vector.
        * m2-lang.c (_initialize_m2_language): Don't add any fields to
        builtin_type_m2_bool.

Tue Feb  1 17:13:32 1994  Kevin Buettner (kev@cujo.geg.mot.com)

        * config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
        Define IN_SIGTRAMP and backtrace correctly through signal handlers.

Tue Feb  1 22:13:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * procfs.c (wait_fd):  Handle EINTR error return from PIOCWSTOP ioctl
        by restarting the ioctl.

Tue Feb  1 16:16:25 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * target.h (target_wait): Add comment about calling
        return_to_top_level.

Tue Feb  1 12:21:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
        additional arguments.
        * xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.

Mon Jan 31 16:10:41 1994  Stu Grossman  (grossman at cygnus.com)

        * sparc-stub.c:  Remove unnecessary #include of memory.h.

Mon Jan 31 12:12:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * mips-tdep.c: Remove code which sets saved_regs from
        init_extra_frame_info and put it in new function mips_find_saved_regs.
        (READ_FRAME_REG): Remove macro and replace uses with the expansion.
        * mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
        check if it is NULL and call mips_find_saved_regs if so.

        * remote-mips.c: Use unfiltered, not filtered, output most places.

        * blockframe.c (get_prev_frame_info): Detect and stop an infinite
        backtrace.  Revise comments.

Mon Jan 31 09:40:33 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * mdebugread.c (parse_procedure):  Remove _sigtramp kludges for
        alpha and irix. The _sigtramp case has to be handled properly
        in the tdep files if we have no ecoff debugging info.
        * alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
        mips-tdep.c (mips_frame_saved_pc):  Handle signal handler frames
        without PC_REGNUM kludge.
        * mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
        Clean up handling of mips sigtramp frames, improve comments.

Sat Jan 29 23:25:57 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * paread.c (read_unwind_info): Fix typo.

        * paread.c (pa_symtab_read): Update the "check_strange_names"
        filter to match GCC's current output.  Filter out section symbols
        (which the HP linker sometimes puts in the wrong place).

Sat Jan 29 07:44:59 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * serial.h (SERIAL_SET_TTY_STATE): Comment return value.

        * Makefile.in (TAGS): Just echo one line, rather than the whole thing.

        * Makefile.in: Remove all references to sparcly-nat.c.

        * Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
        remote-sim.h directly, rather than via $(remote_utils_h).  This avoids
        duplicating serial.h and target.h.

        * Makefile.in: Don't set M_INSTALL and M_UNINSTALL.  These variables
        are not used anywhere (a 5 Oct 1993 change removed the uses).

        * config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
        * config/m68k/es1800.mt: Add comment.
        * remote-es.c: Extensive changes to update to current conventions.

        * ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
        If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
        to achieve the desired timeout.
        * serial.h (serial_t): Add field timeout_remaining.

Fri Jan 28 08:45:02 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * c-exp.y (yylex): Reenable nested type code.

Fri Jan 28 15:40:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * a29k-tdep.c (examine_tag): Add comment regarding argcount.

        * remote-mips.c (mips_ops): Fix docstring.

        * remote-bug.c (bug_ops): Remove spurious newline from docstring.

        * config/m68k/tm-monitor.h: Changes to bring this into accordance
        with the old tm-m68k-em.h:
        (GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
        (HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
        (REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
        Add FIXME regarding GET_LONGJMP_TARGET.

        * remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
        * infptrace.c (kill_inferior): Add comments.
        * main.c (quit_command): Call target_close after we kill or
        detach.
        * remote-udi.c (udi_close): Don't error() if QUITTING.

Fri Jan 28 11:55:52 1994  Rob Savoye  (rob@darkstar.cygnus.com)

        * configure.in: Make m68k-coff and aout add monitor support in
        addition to the standard serial support.

Fri Jan 28 08:45:02 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
        index indexNil.

Fri Jan 28 10:40:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
        * elfread.c (record_minimal_symbol_and_info),
        dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.

Thu Jan 27 15:12:23 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * i386-stub.c: Add ".text" right before "mem_fault:".

        * main.c (baud_rate): Add FIXME comment about printing -1 value.

        * remote-utils.c (usage): Fix message to be accurate and conform
        more closely to normal conventions.

        * remote-utils.c (gr_files_info): Have the exec_bfd test control
        whether to show information about exec_bfd, and not control whether
        to show information about device and speed.

        * remote-utils.c (gr_open): If sr_get_device returns NULL, give
        usage message, don't dump core.

        * remote-bug.c (bug_write_memory): Use alloca, not GCC extension
        for variable size array.
        (bug_fetch_register, bug_store_register): Rename "value" to
        "fpreg_buf" because some compilers don't like variables whose
        names are the same as types.
        (bug_store_register): Use a cast when converting char * to
        unsigned char *.

        * symmisc.c (maintenance_print_symbols): Don't refer to the name
        of the command in error message (the text was referring to the old
        name of the command).

        * symmisc.c (dump_symtab): Fix args to fprintf_filtered.

        * c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
        full details on structure elements without names.  This partially
        reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
        of those changes was accidental.

        * stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
        defined, make it an error to specify a single argument which is not
        a frame number.

        * Makefile.in (version.c), main.c (print_gdb_version): Use
        host_alias and target_alias, not host_canonical and
        target_canonical, to print configuration.

Wed Jan 26 10:57:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
        of builtin_type_long.  It is necessary to get a type which is
        TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.

        Fix many sins which will come up in 32 bit x 64 bit GDB, and
        various miscellaneous things discovered in the process:
        * printcmd.c, defs.h (print_address_numeric): New function.
        * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
        breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
        cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
        printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
        Use it.
        * utils.c, defs.h (gdb_print_address): New function.
        * expprint (dump_expression), gdbtypes.h: Use it.
        * breakpoint.c (describe_other_breakpoints),
        symmisc.c (dump_symtab, print_symbol):
        Use filtered not unfiltered I/O.
        (remove_breakpoints): Remove BREAKPOINT_DEBUG code.  Might as well
        just run gdb under a debugger for this (and it had problems with
        printing addresses, how to print b->shadow, etc.).
        * buildsym.c (make_blockvector), core.c (memory_error),
        exec.c (print_section_info), maint.c (print_section_table),
        mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
        symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
        Add comments saying code is broken.  Marked with "FIXME-32x64".
        * dbxread.c (process_one_symbol), partial-stab.h (default),
        remote-vx.c (vx_run_files_info):
        Don't cast int being passed to local_hex_string.
        * symmisc.c (print_symbol): Don't cast long being passed to %lx.
        * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
        only being a long.
        * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
        and LOC_LOCAL.
        * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
        * source.c: Include <sys/types.h> regardless of USG.

Tue Jan 25 12:58:26 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * valops.c (value_assign):  Set `type' after coercing toval.
        * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
        Use extract_unsigned_integer to get the address of a reference.

Tue Jan 25 11:31:53 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
        AIX can use ? instead of \ for continuation.  Deal with it.

        * paread.c (read_unwind_info): Just assign to objfile->obj_private,
        not OBJ_UNWIND_INFO.  Assigning to a cast is a GCC-ism which
        the HP compiler in ANSI mode doesn't like.

        * main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
        based on USG, rather than defining HAVE_SIGSETMASK to an
        expression containing defined.  Having a macro used in #if expand
        to an expression containing "defined" is undefined according to
        ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
        it to.

Mon Jan 24 20:51:29 1994  John Gilmore  (gnu@cygnus.com)

        * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
        Clean up the changes of 11 Jan, as recommended by Peter Schauer.

Fri Jan 21 19:10:44 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        * ch-exp.y (match_string_literal):  Allow a zero-length string.
        * ch-lang.c (chill_printstr):  Don't print zero-length string funny.

Sat Jan 22 17:08:48 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * i386aix-nat.c (i386_float_info): Reverse order of registers before
        passing them to print_387_status.
        (print_387_status): Don't subtract top from 7 before using it.
        * i387-tdep.c: Remove comment about AIX wanting "top" subtracted
        from 7; the above explains it.

Sat Jan 22 20:25:11 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * mips-tdep.c (init_extra_frame_info):  Use frame relative stack
        pointer value when fixing up the frame at the start of a function.

Sat Jan 22 12:29:13 1994  Stu Grossman  (grossman at cygnus.com)

        * lynx-nat.c (fetch_core_registers):  Load the I & L regs for the
        Sparc from the stack.

Sat Jan 22 08:30:42 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * remote-mips.c (mips_initialize): Clear mips_initializing via
        cleanup chain, not directly.

        * ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout
        of -1 mean forever, like in the HAVE_SGTTY case.  Warn if we are
        munging the timeout due to the limited range of c_cc[VTIME].

        * fork-child.c, inferior.h (fork_inferior): New argument shell_file.
        * procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
        m3-nat.c (m3_create_inferior): Pass it.
        * procfs.c: Remove ptrace function.  It was declared in a way which
        conflicted with the prototype in unistd.h on Solaris.

Sat Jan 22 01:37:40 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * sparc-tdep.c (frame_saved_pc):  Get the pc from the saved pc
        in the sigcontext if it is a signal trampoline frame.
        * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET):
        Define for Solaris2.

Sat Jan 22 00:34:47 1994  Stu Grossman  (grossman at cygnus.com)

        * sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h,
        config/sparc/tm-sparclynx.h:  Move defs of FRAME_SAVED_I0/L0 to
        tm-sparc.h so they can be overridden if necessary.

Fri Jan 21 17:49:28 1994  Stu Grossman  (grossman at cygnus.com)

        * lynx-nat.c:  Add Sparc support.
        * sparcly-nat.c:  Remove.  It's useless.
        * config/sparc/nm-sparclynx.h:  Rewrite.
        * config/sparc/sparclynx.mh (NATDEPFILES):  Replace sparcly-nat.o
        with lynx-nat.o
        * config/sparc/tm-sparclynx.h:  Rewrite.

Fri Jan 21 19:08:48 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * rs6000-pinsn.c: Use the new disassembler in the opcodes
        directory.  Old code was discarded, since the new opcode table has
        a different format.

Fri Jan 21 14:28:30 1994  Fred Fish  (fnf@cygnus.com)

        * Makefile.in (realclean):  Remove info files per make-stds.texi.

Fri Jan 21 12:47:53 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh
        if N_SO_ADDRESS_MAYBE_MISSING is defined.
        * config/sparc/tm-sun4sol2.h: Define it.

Thu Jan 20 15:04:24 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * printcmd.c (print_address_symbolic):  Unconditionally use msymbol
        if we did not find a symbol.

Fri Jan 21 08:20:18 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
        is not defined.

        * hppab-nat.c (call_ptrace): Delete redundant function.
        (kill_inferior, attach, detach, child_resume): Likewise.
        (child_xfer_memory): Likewise.

        * hppah-nat.c (call_ptrace): Delete redundant function.
        (kill_inferior, attach, detach, child_resume): Likewise.

        * config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.

        * config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.

        * config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.

        * config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define.
        (CHILD_XFER_MEMORY): Define.
        (PT_*): Define so that generic infptrace.c code can be used.

Fri Jan 21 09:23:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * xcoffread.c (xcoff_symfile_read): Make second parameter a
        struct section_offsets *, not a (nonexistent) struct section_offset *.

        * xcoffread.c (read_xcoff_symtab): Make main_aux just a union
        internal_xcoff_symtab, not an array of one of them.  Change lots of
        "main_aux" to "&main_aux" and so on.

        * coffread.c, xcoffread.c: Include <coff/internal.h>
        before "symfile.h".

Thu Jan 20 17:30:55 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * coffread.c (coff_getfilename): Make it not static.

        * xcoffread.c (read_xcoff_symtab): complain() not abort().

        * xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes
        a completely gratuitous difference between xcoffread.c and coffread.c).

Wed Jan 19 15:09:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * infrun.c (wait_for_inferior): Don't set frame for
        step_resume_breakpoint for IN_SIGTRAMP cases.

        * infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
        breakpoint.c (bpstat_what): Move step_resume from its own field of
        the struct bpstat_what into the main_action.  Make it override
        other breakpoints.  This is a conservative change in the sense
        that before the step resume breakpoint was a breakpoint.c
        breakpoint, hitting the step resume breakpoint overrode even
        calling bpstat_stop_status.

Wed Jan 19 12:40:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * infrun.c (normal_stop):  Set stop_pc after popping the dummy frame
        in case execution was stopped in the called function.
        * stack.c (print_frame_info, frame_info):  If backtracing through
        a call dummy, handle the starting source line number on a line
        boundary like backtracing through sigtramp.
        * sparc-tdep.c (sparc_frame_find_saved_regs):  Get frame address
        for call dummy frame right.  Remove old test for dummy frame,
        it has been unused at least since gdb-3.5.
        * sparc-tdep.c (sparc_push_dummy_frame):  Set return address register
        of the dummy frame.

Tue Jan 18 16:16:35 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * infcmd.c (signal_command): Accept 0 as legitimate signal number.

Tue Jan 18 14:09:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * infrun.c (signals_info), target.c (target_signal_from_name):
        Use ugly casts to avoid enumvar < enumvar or enumvar++.

Mon Jan 17 22:00:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON.
        * inflow.c (terminal_ours_1): When discussing how to deal with the
        tty state, make note of query() as well as readline.

        * infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of
        signals for which stop and print are cleared by default.

Mon Jan 17 20:00:51 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * config/pa/tm-hppa.h (unwind_table_entry): Use one of the
        reserved fields to hold a stub unwind entry type.  Fix typo.
        (stub_unwind_entry): New structure for raw stub unwind entries.
        (stub_unwind_types): The types of stubs we may encounter.
        (UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
        * hppa-tdep.c (rp_saved): Use additional information provided
        by linker stub unwind descriptors.
        (frameless_function_invocation): Likewise.
        (frame_chain_valid): Likewise.
        * paread.c (compare_unwind_entries): New function for sorting
        unwind table entries.
        (read_unwind_info): Rewrite to remove dependency on host endianness.
        Read in data from the $UNWIND_END$ subspace which contains linker
        stub unwind descriptors.  Merge that data into the basic unwind
        table.

        * hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions.

Mon Jan 17 22:00:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name
        from either the symbol name or the auxent.
        * coffread.c, symfile.h (coff_getfilename): Renamed from getfilename,
        no longer static.

Mon Jan 17 13:35:01 1994  Fred Fish  (fnf@cygnus.com)

        * Makefile.in (ALLPARAM):  Change irix5.h to nm-irix5.h.

Mon Jan 17 12:35:42 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * README:  Update notes for alpha port.

Mon Jan 17 11:15:57 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL
        for operation fault, constraint fault, and type fault.

Sun Jan 16 12:46:01 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * Makefile.in (init.c): Add comment explaining formatting conventions.

        * c-exp.y (parse_number): Assign to temporary between the right
        shifts, to work around a bug in the SCO compiler.

        * Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR):
        Add various files which were added to GDB recently.

        * xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not
        within_function.

        * Makefile.in: Add mostlyclean target.

Sat Jan 15 10:20:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * Version 4.11.4.

Sat Jan 15 18:27:34 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        * main.c (show_commands):  Make return type of extern
        history_get be HIST_ENTRY, rather than struct _hist_entry.
        (The latter loses with the upcoming merged readline.)

Sat Jan 15 10:20:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring
        const char *, not char *.

        * symtab.h (struct symbol): Make section short, not unsigned short.

        * symtab.c (lookup_symbol): Add comment about QUIT here.

        * utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered.

        * c-exp.y (parse_number): Check for overflow regardless of range
        checking.  Fix overflow check to use unsigned LONGEST, not
        unsigned int.

        * c-exp.y (parse_number): Make it so that integer constants are
        builtin_type_long_long if builtin_type_long isn't big enough or if
        an "LL" suffix is used.  Properly handle "UL" or "LU" suffixes.

        * c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC):
        Print our "()" first, then recurse for the target type.

Fri Jan 14 21:55:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * remote-udi.c (udi_create_inferior): Quote empty execfile argument.

        * gdbserver/low-lynx.c: Include <sys/wait.h> not "/usr/include/wait.h".

Fri Jan 14 14:17:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * utils.c (request_quit): Re-establish signal handler regardless
        of USG.

        * config/mips/xm-irix4.h: Define HAVE_TERMIOS.

Fri Jan 14 21:55:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * i960-tdep.c: Include target.h.

Fri Jan 14 17:12:28 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * lynx-nat.c (sys/wait.h): Don't use absolute pathname.

Fri Jan 14 11:06:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus
        changes (status -> ourstatus; declare status, etc.).
        * config/nm-lynx.h: Fix child_wait prototype and include target.h.

Fri Jan 14 14:17:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * Makefile.in (ALLPARAM): Add config/nm-lynx.h.

Fri Jan 14 11:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * remote-mips.c (mips_request, mips_wait): Correct prototypes.

Fri Jan 14 11:37:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * config/i386/xm-linux.h: Define HAVE_TERMIOS.

Fri Jan 14 01:04:36 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * config/alpha/tm-alpha.h (CALL_DUMMY):  Improve comment.

Thu Jan 13 10:32:38 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
        is defined.  Otherwise just report TARGET_SIGNAL_UNKNOWN.

        * mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
        writing it.

        Add search to target vector (#if 0'd until after 4.12):
        * target.h (to_search, target_search): Add.
        * gdbcore.h, core.c (generic_search): Add.
        * remote.c (remote_search): Add.
        * a29k-tdep.c (init_frame_info): Use target_search to find traceback
        tag.

        * printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
        is on, call find_pc_function rather than relying just on the minimal
        symbols (probably only matters for symbol readers which don't put
        statics in the minimal symbols, but changing this strikes me as
        not conservative enough).
        Initialize name_location in all cases.
        If no symbol and no msymbol, don't print anything symbolic.

        * a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.

Wed Jan 12 20:53:16 1994  John Gilmore  (gnu@cygnus.com)

        * printcmd.c (print_address_symbolic):  Make it search the
        symtabs for variables as well as functions.  Add `set print
        fast-symbolic-addr' and default it to fast (the old way).
        Print line numbers for data items as well as functions.

        * symtab.c (find_addr_symbol):  Return the symtab and the symbol
        address, if a symbol is found (take two more args pointing to
        where to store these results).

        * symtab.h (find_addr_symbol):  Add prototype.

Wed Jan 12 19:32:11 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * objfiles.h: Fix comments to reflect the fact that the phrase
        "top of stack" always refers to where the pushing and popping takes
        place, regardless of whether it is at the highest or lowest address.

Wed Jan 12 13:23:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * mdebugread.c (parse_symbol):  Do not set TYPE_TAG_NAME for
        compiler generated tag names.
        * mdebugread.c (parse_type):  Handle cross references to qualified
        aggregate types.
        * valops.c (value_struct_elt):  Improve error message if the
        address of a method is requested from an object instance.
        * valops.c (search_struct_method):  Make name_matched non-static
        to get it initialized correctly.
        * config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER):  Define to
        exclude segment register which are not writable on newer SCO versions.

Wed Jan 12 14:44:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * go32-xdep.c: Remove unused function uerror.
        (sigsetmask): Declare return type.  Declare argument (to match the
        way it is called).  Explicitly return 0.

Wed Jan 12 01:44:25 1994  John Gilmore  (gnu@cygnus.com)

        * symtab.h (struct symbol, general_symbol_info, minimal_symbol,
        partial_symbol):  Shrink the storage sizes of symbols, by making
        enums into 1-byte bitfields when compiled __GNUC__, moving all the
        enums and small ints to the end of each struct to improve
        alignment, and switching the section number from int to unsigned
        short.

Wed Jan 12 00:16:26 1994  John Gilmore  (gnu@cygnus.com)

        * symtab.c (find_addr_symbol):  New routine that will find the nearest
        symbol associated with an address.  It does so by exhaustive
        search of the symtabs, so it's slow but complete.

Tue Jan 11 23:57:30 1994  John Gilmore  (gnu@cygnus.com)

        * coffread.c (read_coff_symtab):  Set PC bounds of _globals_ symtab
        to [0,0] rather than [0, end of first source file].  This avoids
        problems with other parts of GDB looking for linetables in the
        _globals_ symtab.  Eliminate variables num_object_files and
        first_object_file_end.

Tue Jan 11 00:53:46 1994  John Gilmore  (gnu@cygnus.com)

        * a29k-tdep.c (init_frame_info):  Cast null arg to examine_tag.
        (pop_frame):  Restore PC2 and LR0 from dummy frames.
        (push_dummy_frame):  Save PC2 and LR0 into dummy frames.
        (setup_arbitrary_frame):  Handle 3 args and set up real frames.
        * config/a29k/tm-a29k.h (FRAME_NUM_ARGS):  Update comments.
        (DUMMY_FRAME_RSIZE):  Add 2 longwords for PC2 and LR0.
        (SETUP_ARBITRARY_FRAME):  Define.

Tue Jan 11 06:59:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.

Tue Jan 11 14:27:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * remote-udi.c (udi_resume): Correct prototype.

Tue Jan 11 11:10:30 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
        hppa_frame_find_saved_regs.
        * hppa-tdep.c (dig_fp_from_stack): Delete function.
        (prologue_inst_adjust_sp): New function.
        (is_branch, inst_saves_gr, inst_saves_fr): New functions.
        (skip_prologue): Completely rewrite to use unwind information.
        (hppa_frame_find_saved_regs): Likewise.

Tue Jan 11 06:59:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
        to convert a signal number with appropriate bounds checking.

        * remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).

Tue Jan 11 00:53:46 1994  John Gilmore  (gnu@cygnus.com)

        * stack.c (frame_info):  If FRAME_FIND_SAVED_REGS isn't defined,
        print a newline to end the display anyway.

        * sparc-tdep.c (sparc_pop_frame):  Pop the fsr and csr (float and
        coprocessor status regs) when popping a frame.  This fixes 
        float exceptions that occur after calling inferior functions.

        * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
        Read and write the fsr (float status register) to/from the child
        process along with the float regs.  Remove Peter Schauer's change
        of May 24 '93, which has higher overhead and doesn't solve the
        real problem (which was that FSR wasn't being set).

Mon Jan 10 23:16:42 1994  John Gilmore  (gnu@cygnus.com)

        * a29k-tdep.c (examine_prologue):  Don't worry if the ASGEQ
        stack overflow check isn't right after the register stack
        adjustment instruction.  Metaware R2.3u compiler moves other
        things in front of it.  This fix isn't perfect but is what's
        running.

Mon Jan 10 20:08:23 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.

        * config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
        character filenames.
        * configure.in: Change accordingly.

Mon Jan 10 15:48:36 1994  Tom Lord  (lord@rtl.cygnus.com)

        * m68k-stub.c, sparc-stub.c: removed spurious introduction of 
        _filtered io routines from these two files.

Fri Jan  7 12:42:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
        config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET):  Define.
        * mdebugread.c (parse_symbol):  Handle enum sh.type produced by
        DEC c89. 
        * mdebugread.c (add_line):  Handle zero linenos produced by DEC c89.

Fri Jan  7 12:55:25 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
        printing to gdb_stderr.

        * remote-udi.c (udi_kill): Don't close the connection, just set
        inferior_pid to zero.
        (udi_mourn): Call remove_breakpoints.

        * remote-udi.c: Remove obsolete need_artificial_traps comment.

        * i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.

Thu Jan  6 07:17:53 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * symtab.c (lookup_symbol): Don't try adding .c to the name.

        * remote-bug.c: At the start of each section, reset srec_frame
        back to 160.

        * target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
        * target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
        * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
        code which looks for those two waitkinds.  Use switch statement.
        * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
        CHILD_SPECIAL_WAITSTATUS.

        * procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
        * Move target_signal_from_host, target_signal_to_host, and
        store_waitstatus from inftarg.c to target.c.  procfs needs them.
        * target.c: Include "wait.h" and <signal.h>.
        * target.h, infrun.c (proceed), proceed callers: Pass new code
        TARGET_SIGNAL_DEFAULT instead of -1.  This avoids problems with
        enums being treated as unsigned and is cleaner.
        * infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
        TARGET_SIGNAL_0.
        * infcmd.c (signal_command), infrun.c (signals_info):
        Don't allow user to specify numeric equivalent of
        TARGET_SIGNAL_DEFAULT.

Tue Jan  4 15:34:36 1994  Stu Grossman  (grossman@cygnus.com)

        * config/alpha/alpha-netware.mt:  New target support for Alpha
        running Netware.
        * configure.in:  Add alpha-*-netware* target.

Tue Jan  4 14:51:35 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.

Tue Jan  4 09:47:14 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * target.h: Add enum target_waitkind, enum target_signal, and
        struct target_waitstatus.  Change status argument to target_wait to
        be struct target_waitstatus * instead of int *.
        * target.h, infrun.c, all targets: Change type of signal arguments
        to resume(), proceed(), and target_resume() from int to enum
        target_signal.
        * All targets (*_wait, *_resume): Change accordingly.
        * infcmd.c (program_info, signal_command), throughout infrun.c, 
        * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
        * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
        signal code stuff right with the new signals would be non-trivial).
        * inferior.h (stop_signal): Make it enum target_signal not int.
        * target.c, target.h (target_signal_to_string, target_signal_to_name,
        target_signal_from_name): New functions.
        * inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
        store_waitstatus): New functions.
        * procfs.c (procfs_notice_signals): Use them.
        * i960-tdep.c (i960_fault_to_signal): New function, to replace
        print_fault.
        * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.

        * objfiles.c (build_objfile_section_table): Don't abort() if
        objfile->sections is already set.

        * objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
        to match recent change to exec.c.

        * Version 4.11.3.

        * main.c (print_gdb_version): Change year to 1994.

        * ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
        * Makefile.in (NONSRC): Add ChangeLog-93.

Mon Jan  3 11:57:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * stabsread.c (read_type): Allow defining several type numbers
        at once (e.g. "(1,2)=(3,4)="...).

        * stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).

        * breakpoint.c (frame_in_dummy): Check PC as well as frame.

Mon Jan  3 02:47:03 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * mdebugread.c (psymtab_to_symtab_1):  Only pass N_STAB symbols
        to process_one_symbol.
        * symtab.c (find_pc_psymbol):  Search global_psymbols as well to
        avoid caching a bad endaddr in find_pc_partial_function.

Sun Jan  2 21:41:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.

Sat Jan  1 04:35:23 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * infrun.c (wait_for_inferior):  Do not step or step resume past
        the end of a one-line function we just stepped into.

For older changes see ChangeLog-93
\f
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: