1 2000-02-26 Mark Kettenis <kettenis@gnu.org>
3 Make cross-compilation for the Hurd more friendly.
4 From Jeff Bailey <jbailey@gnu.org>:
5 * configure.in: Use AC_CHECK_TOOL to find MiG.
6 * Makefile.in (MIG): New variable.
7 * config/i386/i386gnu.mh (MIG): Remove.
8 * configure: Regenerated.
10 2000-02-26 Kevin Buettner <kevinb@redhat.com>
12 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add
13 comment explaining motivation behind this function and why
14 the generic facilities won't work for this platform.
15 * rs6000-tdep.c (skip_prologue): Always test to make sure
16 that an instruction is read successfully from the target's
17 memory. Introduce notion of instructions which may appear in
18 the prologue, but may not end the prologue. Added explicit
19 check for nop instruction. Use memset() to zero the frame
20 data instead of assignment from a statically allocated,
21 uninitialized structure.
23 Sat Feb 26 17:15:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
25 * MAINTAINERS: Chris Faylor is responsible for all MS Windows
26 systems. Note that Jim Blandy as maintainer for ``tracing
29 2000-02-25 Fernando Nasser <fnasser@cygnus.com>
31 From: Thomas Zenker <thz@Lennartz-electronic.DE>
32 * rdi-share/hsys.c: to compile under 4.4BSD derived systems (FreeBSD,
33 NetBSD...) sys_errlist should not be declared in hsys.c.
34 NEED_SYSERRLIST is set already by configure, so we can use it.
35 * rdi-share/unixcomm.c: 4.4BSD derived systems define BSD, but are
36 posix compliant and we should not work with the old compatibility
37 stuff. Because of that I undef BSD in case of FBSD etc and include
38 sys/ioctl to get the flags.
39 * rdi-share/unixcomm.c: If the TIOCEXCL flags exists set serial line
42 2000-02-24 Kevin Buettner <kevinb@redhat.com>
44 * ppc-linux-tdep.c (ppc_sysv_abi_push_arguments): Put address
45 of return structure in r3 if necessary.
46 (ppc_linux_memory_remove_breakpoints): New function.
47 * rs6000-tdep.c (skip_prologue): Make sure that the cases
48 for storing either cr or lr to the stack only handle those
49 cases. (I.e, don't let these cases match 0x00000000 which is
50 found found in the shared library trampoline prior to the
51 loading of the shared library.)
52 * config/powerpc/tm-linux.h (ppc_linux_memory_remove_breakpoint):
54 (MEMORY_REMOVE_BREAKPOINT): Define.
56 Wed Feb 23 23:27:48 2000 Andrew Cagney <cagney@behemoth.cygnus.com>
58 * hppah-nat.c: Include "gdb_wait.h" instead of <wait.h>.
60 Thu Feb 24 18:42:15 2000 Andrew Cagney <cagney@b1.cygnus.com>
62 * configure.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Set to
63 $(SUBDIR_*_INSTALL) when so configured.
64 * configure: Regenerate.
66 * Makefile.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Define using
68 (install-only): Add dependency on $(CONFIG_INSTALL). Delete code
70 (uninstall): Add dependency on $(CONFIG_UNINSTALL).
71 (SUBDIR_MI_INSTALL, SUBDIR_MI_UNINSTALL, SUBDIR_GDBTK_UNINSTALL,
72 SUBDIR_GDBTK_INSTALL): Define.
73 (install-gdbtk): New target.
75 Thu Feb 24 18:19:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
77 * configure.in (SUBDIR_MI_CFLAGS): Fix typo, wrong brace.
78 * configure: Regenerate.
80 2000-02-24 Christopher Faylor <cgf@cygnus.com>
82 * configure.tgt: Add arm, mips, sh wince targets.
83 * config/arm/tm-wince.h: New file.
84 * config/arm/wince.mt New file.
85 * config/sh/tm-wince.h: New file.
86 * config/sh/wince.mt New file.
87 * config/mips/tm-wince.h: New file.
88 * config/mips/wince.mt New file.
90 * wince-stub.c: New file.
91 * wince-stub.h: New file.
92 * sh-tdep.c: Use correct register names for Windows CE.
94 Wed Feb 23 19:01:45 EST 2000 Nicholas Duffek <nsd@cygnus.com>
96 * top.c (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Update comments.
97 (error_return, quit_return): Merge into catch_return pointer.
98 (return_to_top_level): Update comment. Longjmp to *catch_errors,
99 and communicate reason to catch_errors via setjmp return value.
100 (catch_errors): Always catch both quit and error, and if a catch
101 wasn't requested by caller, throw it to the next catch_error.
102 Replace dual longjmp buffer memcpy with single pointer change.
103 Add FIXME for possibly adding new interface to tell caller what
104 event was caught. Add extensive comments.
105 * defs.h (enum return_reason): Reserve 0 for use as initial
106 setjmp() return value.
107 (RETURN_MASK): New public macro to generate RETURN_MASK_* from
109 (RETURN_MASK_QUIT, RETURN_MASK_ERROR): Define using RETURN_MASK.
111 2000-02-23 Fernando Nasser <fnasser@cygnus.com>
113 * infcmd.c (run_stack_dummy): Do not pop frame on random signal.
114 * valops.c (_initialize_valops): Add command "set unwindonsignal".
115 (hand_function_call): Test for unwind_on_signal and act accordingly.
117 Wed Feb 23 12:58:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
119 * gdbarch.sh (dis_asm_read_memory): Change LEN to unsigned long.
120 Match ../include/dis-asm.h change.
121 * gdbarch.h: Regenerate.
122 * corefile.c (dis_asm_read_memory): Update.
124 Mon Feb 21 13:57:27 2000 Andrew Cagney <cagney@b1.cygnus.com>
126 * configure.in (CONFIG_INITS): Fix typo, was CONFIG_INIT.
127 (ENABLE_CFLAGS): Move initialization to start of file.
128 (enable-gdbmi): Add new configure option --enable-gdbmi. When
129 selected and an ${srcdir}/mi directory is present enable MI
132 * configure: Regenerate.
134 * Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS, SUBDIR_MI_DEPS,
135 SUBDIR_MI_INITS, SUBDIR_MI_LDFLAGS, SUBDIR_MI_CFLAGS): New macros.
136 (CONFIG_OBS, CONFIG_SRCS, CONFIG_DEPS, CONFIG_INITS,
137 CONFIG_LDFLAGS): New macros. Initialized by autoconf via
139 (INTERNAL_LDFLAGS, CDEPS, LINTFILES, DEPFILES, SOURCES,
140 INIT_FILES): Use $(CONFIG_...) instead of @CONFIG...@.
142 * mi: New directory. MI interface to GDB.
144 * defs.h (interpreter_p): Declare when UI_OUT.
145 * top.c (gdb_init): When interpreter_p, check that the interpreter
146 was recognized by one of the linked in interpreters.
147 * main.c (interpreter_p): Define.
148 (captured_main): When UI_OUT, check for ``-i <interpreter>'' option.
149 * event-top.c (display_gdb_prompt): When interpreter_p, assume
150 interpreter displays prompt.
152 * breakpoint.c (print_it_typical, watchpoint_check,
153 print_one_breakpoint, mention): When MI include additional
154 target status information.
155 * infrun.c (print_stop_reason, normal_stop): Ditto.
157 2000-02-22 Jim Blandy <jimb@redhat.com>
159 * gdbarch.sh: Make the `default' field really default to zero, as
162 Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control.
163 * valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
165 (default_coerce_float_to_double, standard_coerce_float_to_double):
167 (value_arg_coerce): Adjust for new definition.
168 * value.h (default_coerce_float_to_double,
169 standard_coerce_float_to_double): New declarations for the above.
170 * gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
171 * gdbarch.c, gdbarch.h: Regenerated.
172 * tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
173 tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
175 * mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
177 (mips_gdbarch_init): Install that as our coerce_float_to_double
180 2000-02-22 Kevin Buettner <kevinb@redhat.com>
182 * ppc-linux-nat.c (supply_gregset, supply_fpregset): Add return
184 * ppc-linux-tdep.c (ppc_linux_at_sigtramp_return_path): Add
187 * ppc-linux-tdep.c (ppc_linux_frame_saved_pc): Handle case
188 where the next frame is a signal handler caller.
190 * config/powerpc/tm-linux.h (PUSH_ARGUMENTS): Remove extraneous
192 (tm-linux.h): Include.
193 (tm-sysv4.h): Don't include (directly). config/tm-linux.h will
194 include this file for us.
195 (REALTIME_LO, REALTIME_HI): Don't define. These are defined by
196 config/tm-linux.h for us.
197 (SOFUN_ADDRESS_MAYBE_MISSING): Define.
199 2000-02-21 Kevin Buettner <kevinb@redhat.com>
201 * Makefile.in (ppc-linux-nat.c, ppc-linux-tdep.c): New files.
202 (ppc-linux-nat.o, ppc-linux-tdep.o): Add dependencies.
203 * configure.tgt (powerpc-*-linux*): Separate from powerpc-*-eabi
206 * ppc-linux-nat.c, ppc-linux-tdep.c, config/powerpc/linux.mt,
207 config/powerpc/nm-linux.h, config/powerpc/tm-linux.h: New files.
208 * config/powerpc/xm-linux.h: Substantially revised for native
210 * config/powerpc/linux.mh (NAT_FILE): Redefine to be nm-linux.h.
211 (NATDEPFILES): Update list to reflect the fact that we can
214 * rs6000-tdep.c, config/rs6000/tm-rs6000.h
215 (rs6000_frameless_function_invocation, rs6000_frame_saved_pc):
216 Renamed; The former names were lacking the rs6000_ prefix.
217 * rs6000-tdep.c (rs6000_frame_saved_pc): Call FRAME_CHAIN
218 instead of rs6000_frame_chain.
219 (rs6000_frame_chain): Call FRAMELESS_FUNCTION_INVOCATION instead
220 of rs6000_frameless_function_invocation.
222 2000-02-21 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
224 From Philippe De Muyter <phdm@macqel.be>
226 * event-loop.c (handle_file_event): In case of poll, enable
227 printing of informational message if an error/exception is
228 detected on the file descriptor.
230 2000-02-21 Jim Kingdon <kingdon@redhat.com>
232 * MAINTAINERS (Misc): Clarify that yes, anyone can edit web pages.
234 Mon Feb 21 12:50:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
236 * buildsym.c: Include "language.h" and "expression.h" for
237 longest_local_hex_string_custom.
239 Mon Feb 21 11:17:18 2000 Andrew Cagney <cagney@b1.cygnus.com>
241 * gdbarch.sh: Include <gdb_wait.h> instead of <wait.h>.
242 * gdbarch.c: Already updated by Wed Feb 9 18:59:16 2000 Andrew
243 Cagney <cagney@b1.cygnus.com>.
245 Mon Feb 21 11:03:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
247 * MAINTAINERS: Update: IA-64 - Kevin Buettner; ARM - Fernando
248 nasser, Jim Ingham and Scott Bambrough; GNU/Linux ARM - Scott
249 Bambrough; event loop - Elena Zannoni; SDS and RDI/APD protocol -
250 to Fernando Nasser and Jim Ingham; KOD - Fernando Nasser; MI -
251 Andrew Cagney, Elena Zannoni and Fernando Nasser; Web pages - Jim
253 * MAINTAINERS: Add Nick Clifton to write after approval list.
255 Mon Feb 21 10:30:39 2000 Andrew Cagney <cagney@b1.cygnus.com>
257 * MAINTAINERS: Add note on multiple maintainers.
259 2000-02-19 Philippe De Muyter <phdm@macqel.be>
261 * cli-out.c (cli_table_header): Type of parameter `alignment' is
262 `enum ui_align', not `int'.
263 (cli_field_string, cli_field_skip): Likewise.
265 2000-02-18 Jim Blandy <jimb@redhat.com>
267 From Jimmy Guo <guo@cup.hp.com>:
268 * buildsym.h (add_free_pendings): Declare.
269 * buildsym.c (add_free_pendings): New function.
270 (make_blockvector): 32x64 fix using longest_local_hex_string().
271 (start_subfile): initialize variable 'subfile'.
273 2000-02-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
275 * remote.c (remote_async_detach): Use target_mourn_inferior(), to
276 make sure that all is cleaned up after we disconnect from the
278 (remote_detach): Ditto.
280 2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
282 From Rodney Brown <RodneyBrown@pmsc.com>
283 * ui-out.c (ui_out_set_flags): Fix typo, removing warning and
284 potentially harming mistake.
286 2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
288 * arm-tdep.c: Use header file instead of extern declarations for
289 the {get,set}_arm_regname* functions.
291 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
293 * configure.in: Replaces obsolete gdbtk-variable.c with
295 * configure: Regenerate.
296 * Makefile.in: Remove obsolete/extraneous references to
299 2000-02-16 Mark Kettenis <kettenis@gnu.org>
301 * target.c (do_target_signal_to_host): Do not use REALTIME_LO in
302 the conversion of the signal number. TARGET_SIGNAL_REALTIME_33 is
303 33 by definition, whereas REALTIME_LO might be 32 on systems that
304 have SIG32 such as Linux. Make sure that the signal number
305 returned is within the range specified by REALTIME_LO and
308 2000-02-16 Mark Kettenis <kettenis@gnu.org>
310 * configure: Regenerated.
312 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
314 * arm-tdep.c (set_disassembly_flavor, arm_othernames,
315 _initialize_arm_tdep): Allows the user to choose between any of
316 the flavors available for the disassembly to be used in the "info
317 reg" command and elsewhere in gdb. It prevents having to maintain
318 this information in two places by using the data kept in the
321 2000-02-09 Mark Kettenis <kettenis@gnu.org>
323 * configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
324 prfpregset_t in <sys/procfs.h>.
325 * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
327 * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
328 prgregset_t and prfpregset_t if they are not already present.
330 Wed Feb 16 19:00:02 2000 Andrew Cagney <cagney@b1.cygnus.com>
332 From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
333 * procfs.c: Define MERGEPID if not defined. For osf4.0e.
335 2000-02-15 Jason Molenda (jsm@bugshack.cygnus.com)
337 * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
340 2000-02-15 Kevin Buettner <kevinb@redhat.com>
343 * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
344 to correct value for generic dummy frames. When using
345 generic dummy frames, don't attempt to write TOC value or
346 function to call into the call dummy.
347 (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
348 code to also handle the PowerOpen ABI.
349 (ppc_push_return_address): Enable for all ports.
350 * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
351 PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER,
352 CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
353 CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
354 provided by generic RS6000 definitions so that call dummies
355 are implemented using generic dummy frames instead.
357 * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
358 prior to changing the stack pointer via ptrace(). Also, ignore
359 attempts to store to undefined registers that are less than
362 * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
363 frame from 436 to 448 to account for alignment padding.
364 (rs6000_push_arguments): Obtain actual register size instead
365 of assuming the register is 4 bytes long. [There's still
366 more work to be done to totally remove the 4 byte assumption,
367 however.] Make sure the stack is 16 byte aligned as required
368 by the PowerOpen ABI. Also, make sure that small structures
369 passed in registers are properly aligned within the register.
371 2000-02-15 Jesper Skov <jskov@cygnus.co.uk>
373 Patch applied by Kevin Buettner <kevinb@redhat.com>
375 * rs6000-tdep.c (skip_prologue): skip copying of argument
376 registers to local variable registers.
378 2000-02-14 Jim Kingdon <kingdon@redhat.com>
380 * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale. A
381 sym->section->index number is not a SECT_OFF_* code.
383 Tue Feb 15 12:07:30 2000 Andrew Cagney <cagney@b1.cygnus.com>
385 * MAINTAINERS (write after approval): Add H.J. Lu.
387 2000-02-14 Nick Clifton <nickc@cygnus.com>
389 * sh-tdep.c: Remove extraneous code.
391 2000-02-14 Amit S. Kale <akale@veritas.com>
393 * elfread.c (elf_symtab_read): Move the use of sym to after where
395 Checked in by Jim Kingdon <kingdon@redhat.com>
397 Mon Feb 14 15:39:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
399 * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.
401 Mon Feb 14 15:20:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
403 From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
404 * dwarf2read.c: (die_is_declaration): New fn.
405 (read_structure_scope): Use it.
407 * dwarf2read.c: (die_is_declaration): Convert to ISO-C.
409 2000-02-10 J.T. Conklin <jtc@redback.com>
411 * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
412 * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
414 * gdbserver/low-nbsd.c: New file.
416 * gdbserver/Makefile.in: convert to autoconf.
417 * gdbserver/configure.in: likewise.
418 * gdbserver/configure: generate.
420 Sun Feb 13 11:21:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
422 * CONTRIBUTE: New file. How to contribute to GDB.
424 Sun Feb 13 10:34:48 2000 Andrew Cagney <cagney@b1.cygnus.com>
426 * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners. Add Kevin
427 Buettner to powerpc maintainers. Make Kevin Buettner the
428 GNU/LINUX PPC native maintainer. Add J.T. Conklin, Jim Kingdon
429 and Jason Molenda to write after aproval list.
431 Sun Feb 13 10:18:44 2000 Andrew Cagney <cagney@b1.cygnus.com>
433 * MAINTAINERS: Reformat. Separate into check-in categories.
435 Sat Feb 12 01:08:21 EST 2000 Nicholas Duffek <nsd@cygnus.com>
437 * uw-thread.c: Remove __FUNCTION__ GNUism.
439 2000-01-17 Amit S. Kale <akale@veritas.com>
441 * elfread.c (elf_symtab_read): Use offset for the section in which a
442 symbol resides, instead of .text section for calculating address of a
444 Checked in by Jim Kingdon <kingdon@redhat.com>
446 2000-02-10 Mark Kettenis <kettenis@gnu.org>
448 * gnu-nat.c: Remove hackery to include <bits/waitflags.h>. It is
449 no longer necessary now we have gdb_wait.h.
451 2000-02-09 Mark Kettenis <kettenis@gnu.org>
453 * gnu-nat.c (proc_string): Make global.
454 (do_mach_notify_dead_name): Suppress dead name notifications if we
455 know that the task is dead.
457 1999-12-13 Mark Kettenis <kettenis@gnu.org>
459 * gnu-nat.c (inf_validate_task_sc): Get task info via proc server
460 instead of directly from the kernel. Add some hackery to make
461 sure that the info isn't influenced by suspension of the task in
462 the proc server itself.
464 2000-02-10 Jim Kingdon <kingdon@redhat.com>
466 * defs.h (MERGEPID): Added. Patch submitted by Andrew Hobson and
467 approved by Michael Snyder.
469 2000-02-09 Mark Kettenis <kettenis@gnu.org>
471 * linux-thread.c: Include defs.h before gdb_wait.h.
473 Wed Feb 9 18:59:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
475 * Makefile.in (wait_h): Delete macro. Update all dependencies
476 specifying gdb_wait.h instead.
478 * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
479 remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
480 remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
481 convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
482 remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
483 remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
484 remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
485 ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
486 infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
487 fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
489 * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.
491 * gdb_wait.h: New file. Based on ../include/wait.h. Include
492 <sys/wait.h> or <wait.h> and then define any missing WIF macros.
494 Wed Feb 9 01:14:54 2000 Andrew Cagney <cagney@amy.cygnus.com>
496 * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
497 * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
498 (d10v_stack_align): Declare.
499 * d10v-tdep.c (d10v_stack_align): Define.
501 1999-08-23 J.T. Conklin <jtc@redback.com>
503 * top.c (remote_timeout): Change default to 2. Add comment
504 explaining history of changes to the default value.
505 * remote.c (_initialize_remote): Remove code that adds set/
506 show remotetimeout, as that's also done in top.c
508 1999-10-18 J.T. Conklin <jtc@redback.com>
510 * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
511 Return E01 instead of P01 when 'P' command fails.
513 2000-02-05 J.T. Conklin <jtc@redback.com>
515 * remote.c (putpkt_binary): Handle NAK from target stub.
517 2000-02-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
519 * configure.in: Remove the addition of sol-thread.c to the
520 CONFIG_INITS list. This caused problems with init.c, because
521 sol-thread.c would be grepped twice for _initialize_* functions.
523 * Makefile.in: Add FIXME for init.c.
525 2000-02-07 Jim Kingdon <kingdon@redhat.com>
527 Clean up compiler warnings:
528 * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
529 stack.c, valprint.c: Change variables to unsigned.
530 * bcache.c: Rearrange to avoid warnings about variables not being set.
531 * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
532 rather than declaring print_max and repeat_count_threashold
533 ourselves (incorrectly).
534 * valprint.h: Do declare repeat_count_threashold.
535 * ch-exp.c: Use default case for internal error.
536 * findvar.c: Don't omit argument type.
537 * symtab.c: Remove unused variable.
539 2000-02-04 Jim Blandy <jimb@redhat.com>
541 * c-typeprint.c (remove_qualifiers): New function.
542 (c_type_print_base): Use it to remove qualifiers from C++
543 qualified names, not strrchr.
545 * c-typeprint.c (c_type_print_base): Recognize type conversion
546 operators by calling is_type_conversion_operator.
547 (is_type_conversion_operator): New function.
549 2000-02-04 Nick Clifton <nickc@cygnus.com>
551 * config/arm/tm-arm.h (LOWEST_PC): Define.
553 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
555 * infrun.c (resume): Make just one call to target_resume(), instead
556 of four: set up correct parameters in all the cases ahead of time,
557 and do call at the end.
559 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
561 * config/powerpc/tm-ppc-eabi.h: Define
562 SOFUN_ADDRESS_MAYBE_MISSING.
564 2000-02-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
566 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
569 Fri Feb 4 22:42:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
571 * Makefile.in (INIT_FILES): Append CONFIG_INITS
572 * configure.in (CONFIG_INIT): Initialize.
573 (links): Link srcdir/gdbtk/library to gdbtcl2.
574 * gdbtcl2: Moved to gdbtk/library.
575 ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
576 gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
577 gdbtk.h: Moved to gdbtk/generic.
579 2000-02-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
581 * printcmd.c (build_address_symbolic): New function. Returns all
582 the parts that are necessary to print an address in a symbolic
584 (print_address_symbolic): Split into a printing part and an
585 information building part, build_address_symbolic().
587 * defs.h (build_address_symbolic): Export.
589 2000-02-03 Jim Blandy <jimb@redhat.com>
591 * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
594 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
596 * arm-tdep.c (arm_push_arguments): Fix passing of floating point
597 arguments on dummy frames.
599 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
601 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
602 (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
604 2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
606 * remote.c (getpkt_sane): New function. It is the old getpkt(),
607 which now returns a timeout indication.
608 (getpkt): New function. Wrapper for getpkt_sane(), so that return
609 value can still be ignored.
611 Tue Feb 1 18:47:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
613 * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
616 Tue Feb 1 00:17:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
618 * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c. Rename
619 ``struct gdb_file'' to ``struct ui_file''. Delete typedef
622 * Makefile.in: Update.
624 * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
625 c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
626 ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
627 cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
628 expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
629 frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
630 gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
631 jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
632 m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
633 printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
634 remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
635 ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
636 serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
637 target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
638 utils.c, v850ice.c, valprint.c, valprint.h, value.h,
639 config/pa/tm-hppa.h: Update.
640 * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
642 2000-01-31 Jason Molenda (jsm@bugshack.cygnus.com)
644 * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
645 config/i386/i386dgux.mh, config/i386/i386sol2.mh,
646 config/i386/i386v4.mh, config/i386/i386v42mp.mh,
647 config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
648 config/m88k/delta88v4.mh, config/mips/irix4.mh,
649 config/mips/irix5.mh, config/mips/mipsv4.mh,
650 config/powerpc/solaris.mh (NATDEPFILES): Change references to
651 proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
652 proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
654 Mon Jan 31 17:14:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
656 * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
658 * main.c (captured_main): Only use the legacy tui_file code when
659 linking in older code such as the TUI.
661 * gdb-file.h, gdb-file.c: New files.
662 * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
663 null_file_isatty, null_file_rewind, null_file_put,
664 null_file_flush, null_file_write, null_file_fputs,
665 null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
666 gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
667 set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
668 set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
669 set_gdb_file_data, struct accumulated_gdb_file,
670 do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
671 mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
672 mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
673 stdio_file_delete, stdio_file_flush, stdio_file_write,
674 stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
675 Moved to gdb-file.h and gdb-file.c.
676 * utils.c (enum streamtype, struct tui_stream, tui_file_new,
677 tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
678 tui_file_rewind, tui_file_put, tui_file_fputs,
679 tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
680 fputs_unfiltered_hook):
681 Moved to tui/tui-file.c and tui/tui-file.h.
683 * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
684 (tui-file.o, gdb-file.o): Add dependencies.
685 (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
686 * main.c: #include tui/tui-file.h.
688 2000-01-28 Fred Fish <fnf@cygnus.com>
690 * findvar.c (value_from_register): Special case handling of D10V
691 pointer values fetched from registers.
693 2000-01-28 Fernando Nasser <fnasser@totem.to.cygnus.com>
695 * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
696 support for new style thumb prologues.
698 2000-01-28 Nick Clifton <nickc@redhat.com>
700 * arm-tdep.c: Remove extraneous dash at start of strings
701 introduced in previous delta.
703 2000-01-27 Nick Clifton <nickc@redhat.com>
705 * arm-tdep.c: Replace uses of arm_toggle_renames() with
706 parse_arm_disassembler_option().
708 2000-01-27 Jim Blandy <jimb@cygnus.com>
710 * symtab.c (decode_line_1): Don't let commas that are within
711 quotes or parenthesis terminate the line spec. Don't use pp when
712 removing the final double quote of a double-quoted string. Don't
713 forget to skip the opening double quote. I have no clue whether
714 this change is correct; probably we've just moved this function
715 from one buggy place to another buggy place, and never came within
716 an outhouse whiff of correctness.
717 (find_toplevel_char): New function.
719 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
721 * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
722 passing the pointer to a thumb function as an argument.
724 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
726 * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
727 are reinserted for another run.
729 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
731 * cli-out.c (cli_filed_string): Test for NULL string.
733 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
735 * infcmd.c (run_stack_dummy): Account for a random signal stopping
736 the inferior as well as breakpoints being hit while performing an
737 inferior function call.
738 * valops.c (hand_function_call): Ditto.
740 2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
742 From Mark Kettenis <kettenis@gnu.org>
744 * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
745 i386_REGS_SEGS_STATE.
746 (HAVE_I387_REGS): Define.
747 (FLOAT_INFO): Remove.
748 * i386gnu-nat.c: Almost completely rewritten to use new i386
749 register layout and `float info' implementation.
750 * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
751 Move prototypes from here.
752 * gnu-nat.h: To here.
754 2000-01-24 Kevin Buettner <kevinb@redhat.com>
756 * utils.c (get_field, put_field): Fix buffer underruns and
757 overruns. Also, handle case where total_len is not evenly
759 (getfield): Make sure zeroing of unwanted bits occurs even
760 when bit field to extract does not straddle two or more
763 2000-01-23 Christopher Faylor <cgf@cygnus.com>
765 * defs.h: Add gdb_thread_select declaration.
767 2000-01-23 Kevin Buettner <kevinb@redhat.com>
769 * linux-thread.c (_initialize_linuxthreads): Make sure that
770 linuxthreads_block_mask does not block SIGCHLD.
772 2000-01-20 Fernando Nasser <fnasser@totem.to.cygnus.com>
774 * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
775 text so that new lines work properly.
777 2000-01-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
779 * proc-utils.h: New file. Export functions from proc-*.c.
781 * proc_api.c: Rename to:
782 * proc-api.c: New file. Add include of proc-utils.h.
784 * proc_events.c: Rename to:
785 * proc-events.c: New file.
787 * proc_flags.c: Rename to:
788 * proc-flags.c: New file.
790 * proc_why.c: Rename to:
791 * proc-why.c: New file. Add include of proc-utils.h.
793 * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
794 ctype.h, proc-utils.h.
795 (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
796 (open_procinfo_files): Conditionalize local variable tmp, to avoid
798 (proc_iterate_over_mappings): Conditionalize local vars mapfd and
800 (procfs_wait): Adjust format in some printf_filetered calls to
801 avoid compiler warnings.
802 (make_signal_thread_runnable): Ifdef 0. The calls to this function
804 (procfs_resume): Add parentheses around '&&' operation.
805 (procfs_set_exec_trap): Remove unused variable.
806 (info_proc_cmd): Add braces to avoid ambiguous else clause.
808 * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
809 proc-why.o): Update dependencies.
811 * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
814 2000-01-17 Jason Molenda (jsm@bugshack.cygnus.com)
816 * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
817 Fix from Robert Lipe <robertl@sco.com>.
818 * configure: Regenerated.
820 2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
822 * stack.c (print_frame_info_base): Break up into the frame info
823 (location) printing part and the rest (source line printing).
824 (print_frame): New function. Take care of printing the location
828 * infrun.c (normal_stop): Use enum values rather than integers for the
829 source_flag to be passed to show_and_print_stack_frame().
832 * frame.h (print_what): New enum for 'source' argument to
833 print_frame_info_base(). Use this instead of obscure numbers.
836 Sun Jan 16 17:58:00 2000 David Taylor <taylor@texas.cygnus.com>
838 * event-top.c (stdin_event_handler): call quit_command rather than
839 exit -- run cleanups, give target code a chance to say goodbye to
840 the target. Fixes bug where the inferior processes were left
841 around on Solaris (and probably elsewhere) by the testsuite.
843 2000-01-14 Mark Salter <msalter@cygnus.com>
845 * v850-tdep.c (v850_target_architecture_hook): Setup correct
846 machine id for disassembly.
848 2000-01-13 Jim Blandy <jimb@cygnus.com>
850 * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
851 convert_to_regset, when regno indicates a specific register.
853 Thu Jan 13 23:34:17 EST 2000 Nicholas Duffek <nsd@cygnus.com>
855 * uw-thread.c: Document libthread.so debugging interface. Minor
856 comment and formatting tweaks.
857 (DEBUG): #define as 0 instead of 1.
858 (CALL_BASE): Include function name in error msg.
859 (libthread_stub): Adjust inferior_pid after thread exit.
860 (uw_thread_create_inferior): Deactivate uw_thread_ops before
861 asking procfs_ops to create inferior.
862 (libthread_init): Don't return nonlocally on error.
864 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
866 * rdi-share/ardi.c (negotiate_params): Fix initialization of static
869 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
871 * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
872 both sides are on the same state.
874 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
876 * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
877 115200 (minor syntax mistake).
879 2000-01-12 Jim Blandy <jimb@cygnus.com>
881 * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
882 this here, to go along with the definitions of PIDGET and TIDGET.
884 2000-01-12 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
886 * thread.c (do_captured_thread_select): New function. Switch
887 current thread, safely from within catch_errors().
888 (gdb_thread_select): New function. Switch threads safely.
889 (thread_command): Use gdb_thread_select().
891 (do_captured_list_thread_ids): New function.
892 (gdb_list_thread_ids): New function.
894 * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
896 2000-01-11 Christopher Faylor <cgf@cygnus.com>
898 * configure.in: Avoid linking -limagehlp unless it's a native build.
899 * configure: Regenerate.
900 * thread.cc (add_thread): Clear private data pointer here or suffer
901 strange behavior when it is checked for NULL later.
903 2000-01-09 Christopher Faylor <cgf@cygnus.com>
905 * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
906 * configure.in: Add an additional library to cygwin link.
907 * configure: Regenerate.
909 Patch from Egor Duda <deo@logos-m.ru>:
910 * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
913 2000-01-07 Michael Snyder <msnyder@cleaver.cygnus.com>
915 * uw-thread.c: New file to support UnixWare user-mode threads:
916 contributed by Nickolas Duffek <nsd@cygnus.com>.
917 * target.h (struct target_ops): New vector, to_extra_thread_info,
918 allows back-ends to give extra details in info thread display.
919 (target_extra_thread_info): define new macro.
920 (target_find_new_threads): simplify macro. Cleanup comments.
921 * target.c (to_extra_thread_info): default and inherit new vector.
922 (cleanup_target): eliminate PARAMS, break up long lines,
923 provide default definition for to_extra_thread_info, and
924 to_find_new_threads. Default to_thread_alive and to_query
925 to return_zero, not target_ignore (they each return int not void).
926 (debug_to_find_new_threads): new debug entry.
927 (setup_target_debug): add debug_to_find_new_threads.
928 * gdbthread.h: export struct thread_info, find_thread_pid, and
929 iterate_over_threads. Add comments. Eliminate PARAMS. Update
930 copyright. Add new private data pointer for use by target back-ends.
931 * thread.c (struct thread_info): move definition to gdbthread.h.
932 (find_thread_pid): new exported function for thread lookup.
933 (iterate_over_threads): new exported function for applying
934 arbitrary operations to threads. Update copyright to 2000.
935 (info_threads_command): use new target_extra_thread_info vector
936 to display extra information about each thread (if implemented).
937 * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
938 Add defines for PIDGET, etc.
939 * config/i386/tm-i386sol2.h: ditto.
940 * config/sparc/tm-sun4sol2.h: ditto.
941 * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
942 * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
943 if -lpthread and -lpthreads fail.
945 * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
946 (proc_flags): combine flags that UnixWare splits into two locations.
947 (proc_modify_flag): add support for PR_KLC (kill on last close).
948 (proc_[un]set_kill_on_last_close): new functions.
950 2000-01-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
952 * infrun.c (normal_stop): Print out thread id when we stop.
954 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
956 * remote.c (remote_open_1): Fix message so it does not imply a
957 specific syntax for serial ports, as it is OS dependent.
958 (remote_async_open_1): Ibid.
959 (init_remote_ops): Ibid.
961 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
963 * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
964 "set remotebaud" command (if set) when no speed is specified on
965 the "target rdi" command.
967 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
969 * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
971 (baud_options[]): Ibid.
973 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
975 * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
976 used by each operating system.
978 2000-01-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
980 * breakpoint.c (until_break_command): Add an argument for the
981 continuation, the beginning of the cleanups set up by this
983 (until_break_command_continuation): Do cleanups until the one
984 passed in as argument instead of doing all of them.
986 * infcmd.c (finish_command_continuation): Expect a new argument,
987 which indicates up to where to do cleanups. Update calls to
988 do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
989 (finish_command): Add another argument for the continuation: the
990 starting cleanup for this command.
992 2000-01-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
994 From Grant Edwards <grante@visi.com> (original patch from Thomas
996 * rdi-share/ardi.c: Allow interruption of interruptible
997 targets with a <CNTL-C>.
999 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
1001 * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
1002 to control port to accommodate some versions of Angel.
1004 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
1006 * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
1007 Add interpretation for C Support Library packets.
1009 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
1011 * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
1012 is now being modified.
1013 * rdi-share/devsw.h: Adjust declaration of the above funtion.
1015 For older changes see ChangeLog-99
1021 version-control: never