1 2011-03-16 Kai Tietz <ktietz@redhat.com>
3 * MAINTAINERS: Update my e-mail address.
5 2011-03-15 Andreas Tobler <andreast@fgznet.ch>
7 * MAINTAINERS: Add myself for write after approval privileges.
9 2011-03-15 Michael Snyder <msnyder@vmware.com>
11 * frame.c (find_frame_sal): Assert sym is not null.
13 * dbxread.c (process_one_symbol): Assert 'name' is not null.
15 * objc-lang.c (selectors_info): Check strchr for null result.
17 * stabsread.c (define_symbol): Guard against bad stabstring input.
19 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr>
21 Remove trailing spaces and tabulations from pascal language
28 2011-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
30 * dwarf2read.c (dwarf2_get_pc_bounds): Require HIGH strictly higher
32 (read_partial_die): Call complaint for inappropriate zero LOWPC or
33 HIGHPC not strictly higher than LOWPC.
35 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr>
37 Fix formatting of function declarations returning a pointer in
39 * varobj.c (varobj_add_child): Ditto.
40 * hppa-tdep.h (hppa_init_objfile_priv_data): Ditto.
41 * inferior.h (get_displaced_step_closure_by_addr): Ditto.
43 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
45 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support
46 for the "generic" vector ABI used with GCC 4.3 and later.
47 (ppc64_sysv_abi_return_value): Likewise.
49 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
51 * infcall.c (call_function_by_hand): Function return value is
52 always a non_lval, even when using struct_return.
54 2011-03-15 Pedro Alves <pedro@codesourcery.com>
56 * printcmd.c (ALL_DISPLAYS_SAFE): New.
57 (map_display_numbers): New.
58 (do_delete_display): New.
59 (undisplay_command): Use map_display_numbers.
60 (do_enable_disable_display): New.
61 (enable_disable_display_command): New function.
62 (enable_display): Delete.
63 (enable_display_command): New.
64 (disable_display_command): Reimplement.
65 (_initialize_printcmd): Adjust "enable display" command to use
66 `enable_display_command' as callback.
68 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
70 * NEWS: Add Python breakpoint 'stop' operation.
72 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
74 * NEWS: Delete duplicate entry. Fix typo.
76 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
78 Fix ARI warning about function names in first column.
79 Put prototype declaration on same line as return type.
82 * python/py-stopevent.h: Ditto.
83 For long function names, split parameters to
84 allow function name on same line as return type.
85 * solib-pa64.c: Ditto.
88 For long function declaration, use single line.
92 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
94 * python/python.h: Declare gdbpy_should_stop and
95 gdbpy_breakpoint_has_py_cond.
96 * python/python.c: Add python.h to includes. Remove python.h from
97 HAVE_PYTHON definition
98 (gdbpy_should_stop): New dummy function.
99 (gdbpy_breakpoint_has_py_cond): New dummy function.
100 * python/py-breakpoint.c (bppy_init): Rewrite to allow
101 sub-classing capabilities.
102 (gdbpy_should_stop): New function.
103 (gdbpy_breakpoint_has_py_cond): New function.
104 (local_setattro): New function.
105 * breakpoint.c (condition_command): Add check for Python 'stop'
107 (bpstat_check_breakpoint_conditions): Execute Python 'stop'
108 operation function as part of stop/continue tests.
110 2011-03-14 Tom Tromey <tromey@redhat.com>
113 * dwarf2loc.c (dwarf_expr_dwarf_call): Remove 'return'.
114 (needs_frame_dwarf_call): Likewise.
116 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
118 Fix ARI warning about functions without parameters that do not
120 * breakpoint.c (all_tracepoints): Replace () by (void).
121 * f-exp.y (match_string_literal): Ditto.
123 * m2-exp.y (yylex): Ditto.
124 * mep-tdep.c (current_me_module): Ditto.
125 (current_options): Ditto.
126 (current_cop_data_bus_width): Ditto.
127 (current_cr_names): Ditto.
128 (current_cr_is_float): Ditto.
129 (current_ccr_names): Ditto.
130 * objc-exp.y (yylex): Ditto.
131 * p-exp.y (yylex): Ditto.
132 * remote.c (send_interrupt_sequence): Ditto.
133 * tracepoint.c (current_trace_status): Ditto.
134 * python/py-evts.c (gdbpy_initialize_py_events): Ditto.
135 * python/py-prettyprint.c (push_dummy_python_frame): Ditto.
137 2011-03-11 Michael Snyder <msnyder@vmware.com>
139 * cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define.
140 * cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS.
141 (lookup_cmd): Test for CMD_LIST_AMBIGUOUS.
142 * completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS.
143 * top.c (set_verbose): Use CMD_LIST_AMBIGUOUS.
145 * event-loop-c (delete_async_signal_handler): Assert prev_ptr.
146 (delete_async_event_handler): Ditto.
148 * python/py-breakpoint.c (bppy_set_condition): Stop memory leak.
150 * python/py-breakpoint.c (bppy_get_commands): Fix memory leak.
152 * top.c (set_verbose): Assert showcmd was found.
154 2011-03-11 Maxim Grigoriev <maxim2405@gmail.com>
156 * xtensa-tdep.c (warning_once): Correct style issues.
158 2011-03-11 Yao Qi <yao@codesourcery.com>
160 * arm-tdep.c (copy_ldr_str_ldrb_strb): Remove redundant statements.
162 2011-03-11 Andreas Schwab <schwab@redhat.com>
164 * common/aclocal.m4: Remove.
166 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
168 * xtensa-tdep.c (windowing_enabled): Remove inline attribute.
169 (xtensa_write_register, xtensa_read_register): Likewise.
170 (xtensa_hextochar): Removed.
171 (xtensa_init_reggroups): Replace xtensa_hextochar () by explicit code.
173 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
175 * xtensa-tdep.c (xtensa_c0reg_t): Update comments.
176 (xtensa_call0_frame_cache_t): Update comments. New fields added.
177 (xtensa_alloc_frame_cache): Add initialization for new fields.
178 (xtensa_frame_cache): Change the way how call0_frame_cache () is called.
179 (warning_once): New function.
180 (xtensa_insn_kind): New item c0opc_and.
181 (call0_classify_opcode): Add the case for AND instruction.
182 (call0_track_op): Change arguments. New local variable litbase.
183 Add the case to handle c0opc_and. Update algorithms for c0opc_mov,
184 c0opc_l32r, c0opc_s32i to take into account dynamic stack adjustments
186 Add cases for c0opc_l32e, c0opc_s32e, c0opc_rfwo, c0opc_rfwu.
187 (call0_analyze_prologue): Update the comments. Change arguments.
188 Add the variety of updates to handle extended prologues, which now can
189 conduct dynamic stack adjustments.
190 (call0_frame_cache): Likewise.
191 (xtensa_skip_prologue): Update call0_analyze_prologue () function call.
192 (xtensa_gdbarch_init): Initialize xtensa_session_once_reported.
194 2011-03-10 Michael Snyder <msnyder@vmware.com>
196 * tracepoint.c (cmd_qtv): Discard unused value 'packet'.
197 (cmd_qtframe): Ditto.
198 (cmd_qtbuffer): Ditto.
199 (cmd_bigqtbuffer): Ditto.
201 2011-03-10 Tom Tromey <tromey@redhat.com>
203 * tracepoint.c (trace_actions_command): Update.
204 * thread.c (thread_apply_command): Update.
205 * reverse.c (delete_bookmark_command): Update.
206 (bookmarks_info): Update.
207 * printcmd.c (undisplay_command): Update.
208 * memattr.c (mem_enable_command): Update.
209 (mem_disable_command): Update.
210 (mem_delete_command): Update.
211 * inferior.c (detach_inferior_command): Update.
212 (kill_inferior_command): Update.
213 (remove_inferior_command): Update.
214 * cli/cli-utils.h (struct get_number_or_range_state): New.
215 (init_number_or_range): Declare.
216 (get_number_or_range): Update.
217 * cli/cli-utils.c (init_number_or_range): New function.
218 (get_number_or_range): Change 'pp' parameter to 'state'. Remove
220 (number_is_in_list): Update.
221 * breakpoint.h (get_tracepoint_by_number): Update.
222 * breakpoint.c (map_breakpoint_numbers): Update for change to
224 (find_location_by_number): Use get_number, not
226 (trace_pass_set_count): New function.
227 (trace_pass_command): Update for change to get_number_or_range.
229 (get_tracepoint_by_number): Remove 'multi_p' parameter; add
232 2011-03-10 Phil Muldoon <pmuldoon@redhat.com>
234 * python/py-param.c (add_setshow_generic): Add set/show callback
235 parameters. Register Python object context.
236 (get_show_value): New function.
237 (get_set_value): New function.
238 (call_doc_function): New function.
239 (get_doc_string): Move behind get_show_value/get_set_value.
241 2011-03-10 Andreas Tobler <andreast-list@fgznet.ch>
243 * fbsd-nat.c (fbsd_make_corefile_notes): Constify local `fname'.
245 2011-03-09 Maxim Grigoriev <maxim2405@gmail.com>
247 * xtensa-tdep.c (xtensa_read_register): Add comment.
248 (xtensa_write_register): Likewise.
249 (xtensa_hextochar): Add comment and update to match coding conventions.
250 (xtensa_frame_cache, xtensa_return_value): Follow coding conventions.
251 (execute_l32e, execute_s32e, execute_code): Update comments.
252 (xtensa_exception_handler_t): Update to match coding conventions.
253 (xtensa_insn_kind): Likewise.
255 2011-03-09 Michael Snyder <msnyder@vmware.com>
257 * mi-cmd-disas.c (mi_cmd_disassemble): Fix memory leak.
259 2011-03-09 Pedro Alves <pedro@codesourcery.com>
261 * nto-tdep.c (nto_find_and_open_solib): Constify local `base'.
263 2011-03-09 Tom Tromey <tromey@redhat.com>
265 * thread.c (restore_selected_frame): Handle frame_level == -1.
266 (make_cleanup_restore_current_thread): Use
267 get_selected_frame_if_set.
268 * frame.h (get_selected_frame_if_set): Declare.
269 * frame.c (get_selected_frame_if_set): New function.
271 2011-03-09 Pedro Alves <pedro@codesourcery.com>
273 * cli/cli-cmds.c (shell_escape): Use lbasename.
274 * coffread.c (coff_start_symtab): Constify parameter.
275 (complete_symtab): Constify `name' parameter.
276 (coff_symtab_read): Constify `filestring' local.
277 (coff_getfilename): Constify return and `result' local.
279 * fbsd-nat.c (fbsd_make_corefile_notes): Use lbasename.
280 * linux-fork.c (info_checkpoints_command): Use lbasename.
281 * linux-nat.c (linux_nat_make_corefile_notes): Use lbasename.
282 * minsyms.c (lookup_minimal_symbol): Use lbasename.
283 * nto-tdep.c (nto_find_and_open_solib): Use lbasename.
284 * procfs.c (procfs_make_note_section): Use lbasename.
285 * tui/tui-io.c (printable_part): Constity return and parameter.
287 (print_filename): Constify parameters, and local `s'.
288 (tui_rl_display_match_list): Constify local `temp'.
290 2011-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
293 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
294 Fix DWARF-3+ DW_AT_accessibility default assumption.
295 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
296 cu->header.version >= 3.
298 2011-03-09 Yao Qi <yao@codesourcery.com>
300 * common/Makefile.in: Remove.
301 * common/configure: Remove.
302 * common/configure.ac: Remove.
304 2011-03-09 Yao Qi <yao@codesourcery.com>
307 2011-02-11 Yao Qi <yao@codesourcery.com>
309 * common/Makefile.in: Add copyright header.
311 2011-02-11 Yao Qi <yao@codesourcery.com>
313 * Makefile.in: Remove signals.o from COMMON_OBS. Link
315 * configure.ac: Add common to sub dir.
316 * configure: Regenerate.
318 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
320 * xtensa-tdep.c (call0_ret): New function.
321 (xtensa_skip_prologue): Speed up analysis.
323 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
325 * xtensa-tdep.c (xtensa_register_reggroup_p): Count in all registers
326 while executing MI command -data-list-changed-registers.
328 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
330 * xtensa-tdep.c (xtensa_read_register): New function.
331 (xtensa_write_register): New function.
332 (xtensa_find_register_by_name): New function.
333 (xtensa_windowed_frame_cache): Update comments in type description.
334 (xtensa_frame_cache): Likewise.
335 (xtensa_window_interrupt_insn): New function.
336 (xtensa_frame_cache): Add analysis for Xtensa Window Exception frames.
337 (xtensa_insn_kind): Add new instructions.
338 (rwx_special_register): New function.
339 (call0_classify_opcode): Add new instructions to the analysis.
340 (a0_saved, a7_saved, a11_saved): New variables.
341 (a0_was_saved, a7_was_saved, a11_was_saved): New variables.
342 (execute_l32e): New function.
343 (execute_s32e): New function.
344 (xtensa_exception_handler_t): New type.
345 (execute_code): New function.
346 (xtensa_window_interrupt_frame_cache): New function to conduct frame
347 analysis for Xtensa Window Exception handlers.
349 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
351 * xtensa-tdep.c (TX_PS): New.
352 (windowing_enabled): Update to count for Call0 ABI.
353 (xtensa_hextochar): New.
354 (xtensa_init_reggroups): Make algorithm generic.
355 (xtensa_frame_cache): Use TX_PS on Tiny Xtensa.
357 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
359 * xtensa-tdep.h (XTENSA_MAX_COPROCESSOR): Update.
361 2011-03-08 Michael Snyder <msnyder@vmware.com>
363 * i386-tdep.c (i386_follow_jump): Check return value of
365 (i386_analyze_struct_return): Ditto.
366 (i386_skip_probe): Ditto.
367 (i386_match_insn): Ditto.
368 (i386_skip_noop): Ditto.
369 (i386_analyze_frame_setup): Ditto.
370 (i386_analyze_register_saves): Ditto.
371 (i386_skip_prologue): Ditto.
372 (i386_skip_main_prologue): Ditto.
374 * target.c (read_whatever_is_readable): Fix memory leak.
376 * i386-tdep.c (i386_process_record): Document fall through.
378 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
380 Fix DWARF-3+ DW_AT_accessibility default assumption.
381 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
382 cu->header.version >= 3.
384 2011-03-08 Pedro Alves <pedro@codesourcery.com>
386 * remote.c (remote_check_symbols): Skip if the target has no
389 2011-03-08 Joel Brobecker <brobecker@adacore.com>
391 * target.c (read_whatever_is_readable): Reformat comment,
392 with a minor typo fix. Minor reformatting of the code.
394 2011-03-08 Yao Qi <yao@codesourcery.com>
396 * arm-tdep.c: Remove prototype declaration displaced_in_arm_mode.
397 (displaced_read_reg): Add `dsc' parameter, remove `from' parameter.
398 Use cached result instead of calling displaced_in_arm_mode again.
399 (branch_write_pc, alu_write_pc, load_write_pc): Add `dsc' parameter.
400 (displaced_write_reg, copy_preload, copy_preload_reg): Callers update.
401 (cleanup_copro_load_store, copy_copro_load_store): Likewise.
402 (cleanup_branch, copy_bx_blx_reg, copy_alu_imm): Likewise.
403 (cleanup_alu_reg, copy_alu_reg, cleanup_alu_shifted_reg): Likewise.
404 (copy_alu_shifted_reg, cleanup_load, cleanup_store): Likewise.
405 (copy_extra_ld_st, copy_ldr_str_ldrb_strb): Likewise.
406 (cleanup_block_load_all, cleanup_block_store_pc): Likewise.
407 (cleanup_block_load_pc, copy_block_xfer): Likewise.
408 * arm-linux-tdep.c (arm_linux_copy_svc): Callers update.
409 (arm_catch_kernel_helper_return): Likewise.
410 * gdb/arm-tdep.h : Update function declarations.
412 2011-03-07 Michael Snyder <msnyder@vmware.com>
414 * dwarf2loc.c (indirect_pieced_value): Assert 'piece' not null.
416 * ser-unix.c (hardwire_get_tty_state): Stop memory leak.
418 * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Free environment.
420 * elfread.c (elf_symtab_read): Stop memory leak.
422 * main.c (captured_main): Fix memory leak.
424 2011-03-07 Andreas Schwab <schwab@linux-m68k.org>
426 * ada-lang.c (compare_names): Call is_name_suffix with string1
429 2011-03-07 Tom Tromey <tromey@redhat.com>
431 * xcoffread.c (xcoff_sym_fns): Update.
432 * symfile.h (struct sym_fns) <sym_read_psymbols>: New field.
433 (enum symfile_add_flags) <SYMFILE_NO_READ>: New constant.
434 * symfile.c (syms_from_objfile): Handle SYMFILE_NO_READ.
435 (symbol_file_add_with_addrs_or_offsets): Likewise.
436 (reread_symbols): Handle OBJF_PSYMTABS_READ.
437 * somread.c (som_sym_fns): Update.
438 * psymtab.h (require_partial_symbols): Declare.
439 * psymtab.c (require_partial_symbols): New function.
440 (ALL_OBJFILE_PSYMTABS_REQUIRED): New macro.
441 (ALL_OBJFILE_PSYMTABS): Undef.
442 (ALL_PSYMTABS): Move from psympriv.h.
443 (lookup_partial_symtab, find_pc_sect_psymtab)
444 (lookup_symbol_aux_psymtabs, relocate_psymtabs)
445 (find_last_source_symtab_from_partial)
446 (forget_cached_source_info_partial)
447 (print_psymtab_stats_for_objfile, read_symtabs_for_function)
448 (expand_partial_symbol_tables, read_psymtabs_with_filename)
449 (map_symbol_names_psymtab, map_symbol_filenames_psymtab)
450 (find_symbol_file_from_partial, map_matching_symbols_psymtab)
451 (expand_symtabs_matching_via_partial, maintenance_info_psymtabs):
452 Use ALL_OBJFILE_PSYMTABS_REQUIRED.
453 * psympriv.h (ALL_PSYMTABS): Move to psymtab.c.
454 * objfiles.h (OBJF_PSYMTABS_READ): New macro.
455 * objfiles.c (objfile_has_partial_symbols): Handle lazily-read
457 * mipsread.c (ecoff_sym_fns): Update.
458 * machoread.c (macho_sym_fns): Update.
459 * elfread.c (elf_symfile_read): Set up for lazy psymtab reading.
460 (read_psyms): New function.
461 (elf_sym_fns, elf_sym_fns_gdb_index): Update.
462 (elf_sym_fns_lazy_psyms): New global.
463 * dwarf2read.c (dwarf2_initialize_objfile): Don't call
464 dwarf2_build_psymtabs.
465 * dbxread.c (aout_sym_fns): Update.
466 * coffread.c (coff_sym_fns): Update.
468 2011-03-07 Tom Tromey <tromey@redhat.com>
470 * infrun.c (print_exited_reason): Include inferior id and pid in
473 2011-03-07 Tom Tromey <tromey@redhat.com>
475 * target.h (struct target_ops) <to_has_execution>: Add ptid_t
477 (target_has_execution_1): Update.
478 (target_has_execution_current): Declare.
479 (target_has_execution): Call target_has_execution_current.
480 (default_child_has_execution): Update.
481 * target.c (default_child_has_execution): Add 'the_ptid'
483 (target_has_execution_1): Likewise.
484 (target_has_execution_current): New function.
485 (add_target): Update.
486 (init_dummy_target): Update.
487 * remote-m32r-sdi.c (m32r_has_execution): New function.
488 (init_m32r_ops): Use it.
489 * record.c (record_core_has_execution): Now static. Add
490 'the_ptid' parameter.
491 * inferior.c (have_live_inferiors): Don't save current thread.
492 Use target_has_execution_1.
494 2011-03-07 Yao Qi <yao@codesourcery.com>
496 * Makefile.in (aclocal_m4_deps): Remove gnulib/m4/memcmp.m4.
498 2011-03-07 Joel Brobecker <brobecker@adacore.com>
500 * elfread.c (elf_symtab_read): Minor reformatting.
502 2011-03-07 Joel Brobecker <brobecker@adacore.com>
504 * objc-lang.c (selectors_info): Minor reformatting.
506 2011-03-07 Joel Brobecker <brobecker@adacore.com>
508 * ada-lang.c (compare_names): Add FALLTHROUGH comment.
510 2011-03-07 Joel Brobecker <brobecker@adacore.com>
511 Michael Snyder <msnyder@vmware.com>
513 * ada-valprint.c (ada_val_print_array): Move the declaration of
514 "byte_order" and "elttype" inside the block where these variables
515 are actually used. Remove some special handling for the case
516 where "elttype" and "eltlen" are null. Replace by a comment
517 and a couple of assertion checks.
519 2011-03-05 Michael Snyder <msnyder@vmware.com>
521 * source.c (add_path): Replace semicolon at end of block.
522 * dwarf2expr.c (execute_stack_op): Ditto.
524 2011-03-05 Mike Frysinger <vapier@gentoo.org>
526 * bfin-tdep.c: Include sim-regno.h and gdb/sim-bfin.h.
527 * configure.tgt (bfin-*-*linux*): Define gdb_sim.
528 (bfin-*-*): Likewise.
530 2011-03-05 Michael Snyder <msnyder@vmware.com>
532 * dwarf2expr.c (execute_stack_op): Delete superfluous semicolon.
533 * mdebugread.c (parse_symbol): Ditto.
534 * parse.c (parse_exp_in_context): Ditto.
535 * source.c (add_path): Ditto.
536 * utils.c (gnu_debuglink_crc32): Ditto.
537 * varobj.c (variable_language): Ditto.
539 * linux-tdep.c (linux_get_siginfo_type): Stop memory leak.
541 2011-03-04 Michael Snyder <msnyder@vmware.com>
543 * linux-fork.c (inferior_call_waitptid): Fix copy/paste error.
545 * symfile.c (simple_overlay_update): Check for null return value
546 from lookup_minimal_symbol.
548 * xml-syscall.c (syscall_start_syscall): Assert name is non null.
550 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
552 * eval.c (parse_and_eval_address_1): Remove function.
553 * linespec.c (decode_indirect): Call parse_to_comma_and_eval
554 instead of parse_and_eval_address_1.
555 * value.h (parse_and_eval_address_1): Remove prototype.
557 2011-03-04 Michael Snyder <msnyder@vmware.com>
559 * remote.c (putpkt_binary): Document that case stmt falls through.
561 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
563 * breakpointc (print_it_typical): Move NULL check from here...
564 (print_bp_stop_message): ... to here.
566 2011-03-04 Michael Snyder <msnyder@msnyder-server.eng.vmware.com>
568 * breakpoint.c (enable_command): Use break instead of continue,
569 and fill in a missing break.
570 (disable_command): Ditto.
572 2011-03-04 Ulrich Weigand <ulrich.weigand@linaro.org>
574 * inflow.c (terminal_init_inferior_with_pgrp): Copy ttystate.
575 (terminal_save_ours): Remove misleading comment.
576 (inflow_inferior_data_cleanup): Free ttystate.
577 (inflow_inferior_exit): Likewise.
578 (copy_terminal_info): Copy ttystate.
580 * serial.c (serial_copy_tty_state): New function.
581 * serial.h (serial_copy_tty_state): Add prototype.
582 (struct serial_ops): Add copy_tty_state callback.
583 * ser-base.c (ser_base_copy_tty_state): New function.
584 * ser-base.h (ser_base_copy_tty_state): Add prototype.
585 * ser-go32.c (dos_copy_tty_state): New function.
586 (dos_ops): Install copy_tty_state callback.
587 * ser-mingw.c (_initialize_ser_windows): Likewise.
588 * ser-pipe.c (_initialize_ser_pipe): Likewise.
589 * ser-unix.c (hardwire_copy_tty_state): New function.
590 (_initialize_ser_hardwire): Install it.
592 2011-03-04 Michael Snyder <msnyder@vmware.com>
594 * breakpoint.c (create_breakpoint): Add missing break statement.
596 Reverting this patch:
597 * infcall.c (call_function_by_hand): Add break statements for lint.
599 Reverting this patch:
600 * cli/cli-script.c (script_from_file): Add break for lint.
602 2011-03-04 Michael Snyder <msnyder@vmware.com>
604 * solib.c (reload_shared_libraries_1): Close memory leak.
606 2011-03-03 Tom Tromey <tromey@redhat.com>
609 * dwarf2read.c (process_psymtab_comp_unit): Handle case where
612 2011-03-03 Michael Snyder <msnyder@vmware.com>
614 * remote-fileio.c (remote_fileio_func_fstat): Initialize all
615 fields of struct 'st' to zero.
617 * tui/tui-winsource.c (tui_update_source_window_as_is): Initialize
618 sal.pspace before calling set_current_source_symtab_and_line.
620 2011-03-03 Yao Qi <yao@codesourcery.com>
622 * Makefile.in (configure-common): Remove. Let Makefile
623 in dir common to rebuild itself.
624 (common/Makefile): Likewise.
626 2011-03-03 Joel Brobecker <brobecker@adacore.com>
628 * utils.c (parse_escape): Add i18n markup in error message.
630 2011-03-03 Yao Qi <yao@codesourcery.com>
632 * gdb/arm-tdep.c (shifted_reg_val): Replace magic number 15 with
634 (thumb_get_next_pc_raw, arm_get_next_pc_raw): Likewise.
635 (displaced_write_reg, displaced_read_reg): Likewise.
636 (copy_ldr_str_ldrb_strb, cleanup_block_load_all): Likewise.
637 (cleanup_block_load_pc, copy_block_xfer): Likewise.
638 (cleanup_branch): Replace magic number 14 and 15 with
639 ARM_LR_REGNUM and ARM_PC_REGNUM respectively.
641 2011-03-02 Michael Snyder <msnyder@vmware.com>
643 * maint.c (maintenance_do_deprecate): No need to check for NULL.
645 * cli/cli-script.c (script_from_file): Add break for lint.
647 * mdebugread.c (parse_partial_symbols): Fix indent.
649 * target-descriptions.c (tdesc_gdb_type): No need to call
650 xstrdup, callee saves a copy.
652 * printcmd.c (print_scalar_formatted): Use strncpy for safety.
654 * infcall.c (call_function_by_hand): Add break statements for lint.
656 * utils.c (parse_escape): Escape the escape char.
658 * python/py-inferior.c (build_inferior_list): Error out if
660 (gdbpy_inferiors): Error out if build_inferior_list fails.
662 * linux-nat.c (linux_nat_xfer_partial): Preserve errno around
665 * record.c (record_restore): Move printf to before error return.
667 2011-03-02 Yao Qi <yao@codesourcery.com>
669 * arm-tdep.h (struct displaced_step_closure): Add two new fields
670 is_thumb and insn_size.
671 * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset
672 on both ARM and Thumb mode.
673 (arm_process_displaced_insn): Set is_thumb and insn_size.
674 (arm_displaced_init_closure): Handle both 16-bit and 32-bit.
675 (arm_displaced_step_fixup): Likewise.
677 2011-03-01 Michael Snyder <msnyder@vmware.com>
679 * cli/cli-dump.c (dump_bfd_file): Check error return and warn.
681 * jv-lang.c (evaluate_subexp_java): Conditional can't be true.
683 * dwarf2read.c (dwarf2_compute_name): NAME cannot be null here.
685 * cli/cli-dump.c (restore_binary_file): Validate ftell return value.
687 * ada-lang.c (ada_make_symbol_completion_list): Replace malloc
690 * ada-lang.c (aggregate_assign_others): Rename inner scope variable
691 which shadows function parameter.
693 * tracepoint.c (create_tsv_from_upload): Superfluous call
694 to xstrdup. Callee already calls xstrdup.
696 * linespec.c (decode_line_1): Remove unnecessary null check.
698 * tracepoint.c (scope_info): Fix mem leak, remove underused
701 * python/py-prettyprint.c (apply_val_pretty_printer): Remove
702 superfluous null check.
704 * std-regs.c (value_of_builtin_frame_pc_reg): Frame can't be null.
705 (value_of_builtin_frame_fp_reg): Ditto.
707 * event-top.c (display_gdb_prompt): Remove superfluous null check.
709 * python/py-prettyprint.c (apply_val_pretty_printer): VAL may
712 * linespec.c (decode_line_1): Check for null before dereference.
714 * reverse.c (record_restore): Move null-check to before pointer
717 * python/py-utils.c (gdbpy_obj_to_string): Delete unused variable.
719 * objc-lang.c (selectors_info): Add explanitory comment.
720 (classes_info): Ditto.
722 2011-03-01 Ulrich Weigand <ulrich.weigand@linaro.org>
724 * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define.
725 (arm_linux_restart_syscall_init): Handle both on-stack and in-kernel
726 versions of the trampoline. Handle Thumb vs. ARM addresses.
727 (arm_kernel_linux_restart_syscall_tramp_frame): New global.
728 (arm_linux_init_abi): Install it.
729 * arm-tdep.c (arm_psr_thumb_bit): Make global.
730 * arm-tdep.c (arm_psr_thumb_bit): Add prototype.
732 2011-02-28 Michael Snyder <msnyder@vmware.com>
734 * ui-out.c (ui_out_field_core_addr): Make local char buffer
735 a little bigger, to avoid possibility of an overflow.
737 * breakpoint.c (breakpoint_adjustment_warning): Make local char
738 buffers a little bigger, to avoid possibility of an overflow.
740 * coffread.c (coff_getfilename): Add check to avoid overflow.
742 * objc-lang.c (selectors_info): Add a small safety margin to
744 (classes_info): Error out on too long REGEXP.
746 * infrun.c (handle_inferior_event): Remove unused function call.
748 * fork-child.c (fork_inferior): Remove ifdef'd code and
751 * linux-thread-db.c (attach_thread): Discard unused value.
753 * linux-nat.c (linux_handle_extended_wait): Delete unused variable.
755 * remote.c (remote_get_noisy_reply): Discard unused value.
756 (remote_vcont_resume): Ditto.
757 (remote_stop_ns): Ditto.
759 * linespec.c (decode_objc): Delete unused variable.
761 * tui/tui-regs.c (tui_register_format): Delete unused variable.
763 * dwarf2read.c (add_partial_symbol): Discard unused values.
764 (read_base_type): Delete unused variable.
766 * dbxread.c (read_dbx_symtab): Discard unused value.
768 * eval.c (evaluate_subexp_standard): Delete unused variable,
769 and discard unused values.
771 * infcmd.c (_initialize_infcmd): Discard unused values.
773 * stabsread.c (rs6000_builtin_type): Missing break statement.
775 * dbxread.c (process_one_symbol): Discard unused value.
777 * coffread.c (coff_end_symtab): Delete unused variable.
779 * dwarf2read.c (dw2_get_file_names): Discard unused value.
780 (dwarf2_add_typedef): Delete unused variable.
781 (read_namespace): Ditto.
782 (dwarf_decode_macros): Ditto.
784 * m2-lang.c (evaluate_subexp_modula2): Discard unused variable.
786 * opencl-lang.c (evaluate_subexp_opencl): Discard unused value.
788 * p-valprint.c (pascal_val_print): Discard unused value.
790 * utils.c (nquery): Call va_end before return;
794 * proc-service.c (ps_plog): Call va_end before return.
796 2011-02-28 Tom Tromey <tromey@redhat.com>
798 * python/python.c (gdbpy_value_cst): New global.
799 (_initialize_python): Initialize it.
800 * python/python-internal.h (gdbpy_value_cst): Declare.
801 * python/py-value.c (convert_value_from_python): Use
804 2011-02-28 Michael Snyder <msnyder@vmware.com>
806 * python/py-cmd.c (cmdpy_init): Fix memory leak.
808 * breakpoint.c (catch_syscall_completer): Free malloced list.
810 * jv-lang.c (java_primitive_type_from_name): Add missing break.
812 * opencl-lang.c (lval_func_check_validity): Rename inner variables.
813 (lval_func_check_synthetic_pointer): Ditto.
814 (lval_func_free_closure): Fix use-after-free.
816 2011-02-28 Tom Tromey <tromey@redhat.com>
818 * psymtab.c (expand_partial_symbol_tables): Use
819 ALL_OBJFILE_PSYMTABS.
821 2011-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
823 * objc-lang.c (selectors_info): Error on too long REGEXP.
825 2011-02-28 Michael Snyder <msnyder@vmware.com>
827 * python/py-param.c (set_parameter_value): Add missing
830 * linux-record.c (record_linux_system_call): Add missing
833 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
835 * breakpoint.c (print_one_breakpoint_location): Remove unused
836 argument PRINT_ADDRESS_BITS. Update callers.
837 (print_one_breakpoint): Likewise.
839 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
841 * breakpoint.c (wrap_indent_at_field): New function.
842 (print_breakpoint_location): Use it instead of WRAP_INDENT argument.
843 Allocate ui_stream locally instead of using STB argument.
844 (print_one_breakpoint_location): Update call.
845 * ui-out.c (ui_out_query_field): New function.
846 * ui-out.h (ui_out_query_field): Add prototype.
848 2011-02-28 Joel Brobecker <brobecker@adacore.com>
850 From Michael Snyder <msnyder@vmware.com>
851 * ada-exp.y (write_object_renaming): Add FALLTHROUGH comment.
853 2011-02-27 Michael Snyder <msnyder@vmware.com>
855 * objc-lang.c (selectors_info): Prevent string overrun.
857 * tui/tui-stack.c (tui_get_function_from_frame): Fix off by one
860 * symtab.c (rbreak_command): Move variable 'file_name' to
863 * d-valprint.c (dynamic_array_type): Avoid shadowing a function
864 param with a local variable of the same name.
866 2011-02-27 Michael Snyder <msnyder@vmware.com>
868 * value.c (value_from_history_ref): New function.
869 * value.h (value_from_history_ref): Export.
870 * cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
871 to parse value history references.
872 * cli/cli-utils.h (get_number_trailer): Update comment.
874 2011-02-27 Michael Snyder <msnyder@vmware.com>
876 * inferior.c (detach_inferior_command): Use get_number_or_range.
877 (kill_inferior_command): Ditto.
878 (remove_inferior_command): Ditto.
879 (initialize_inferiors): Make command names plural.
882 2011-02-27 Michael Snyder <msnyder@vmware.com>
884 * darwin-nat-info.c: Fix comment typo.
885 * dwarf2expr.h: Ditto.
888 * frame-unwind.h: Ditto.
890 * hppa-hpux-tdep.c: Ditto.
891 * i386-linux-nat.c: Ditto.
892 * linux-nat.c: Ditto.
895 * ppc-linux-tdep.c: Ditto.
898 * tui/tui-winsource.c: Ditto.
900 2011-02-26 Michael Snyder <msnyder@vmware.com>
902 * breakpoint.c (reattach_breakpoints): Avoid resource leak (ui_file).
904 * maint.c (maintenance_do_deprecate): Plug a memory leak.
906 * dwarf2loc.c (insert_bits): Avoid shadowing a function param
907 with a local variable of the same name.
909 * i387-tdep.c (i387_supply_fxsave): Avoid shadowing a function
910 param with a local variable of the same name.
911 (i387_supply_xsave): Ditto.
913 * linux-low.c (linux_nat_xfer_osdata): Rename local variable so
914 that it does not shadow a function parameter.
916 * i386-nat.c (i386_length_and_rw_bits): Document that case
917 statement is meant to fall through.
919 * expprint.c (dump_subexp_body_standard): Document that case
920 statement is meant to fall through.
922 * amd64-linux-tdep.c (amd64_linux_syscall_record): Delete
923 dead if statement. Condition can't be false.
925 2011-02-25 Michael Snyder <msnyder@vmware.com>
927 * arm-tdep.c: Fix typos in comments.
928 * bsd-uthread.c: Ditto.
929 * completer.c: Ditto.
931 * cp-namespace.c: Ditto.
932 * cp-support.c: Ditto.
933 * cris-tdep.c: Ditto.
935 * dwarf2read.c: Ditto.
939 * mdebugread.c: Ditto.
940 * mips-tdep.c: Ditto.
941 * ppc-linux-nat.c: Ditto.
942 * ppc-linux-tdep.c: Ditto.
944 * sol-thread.c: Ditto.
945 * solib-frv.c: Ditto.
947 * sparc64-tdep.c: Ditto.
949 * stabsread.c: Ditto.
954 * python/py-block.c: Ditto.
955 * python/py-symbol.c: Ditto.
956 * python/py-symtab.c: Ditto.
957 * python/py-value.c: Ditto.
958 * tui/tui-win.c: Ditto.
960 2011-02-25 Michael Snyder <msnyder@vmware.com>
962 * inferior.c (print_inferior): Accept a string instead of an int
963 for requested_inferiors, and use get_number_or_range to parse it.
964 (info_inferiors_command): Pass args string to print_inferior.
965 (initialize_inferiors): Change help string for info inferiors.
966 * inferior.h (print_inferior): Export prototype change.
968 2011-02-25 Tom Tromey <tromey@redhat.com>
970 * common/ax.def (invalid2): Set to 0x31.
972 2011-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
974 * dwarf2loc.c (disassemble_dwarf_expression) <DW_OP_breg[0-9]+>: Use
976 (disassemble_dwarf_expression) <DW_OP_bregx>: Drop variable offset,
978 (disassemble_dwarf_expression) <DW_OP_fbreg>: Use L and plongest.
980 2011-02-24 Michael Snyder <msnyder@vmware.com>
982 * Makefile.in (clean): Make clean should remove generated files
983 observer.h and observer.inc.
985 2011-02-24 Joel Brobecker <brobecker@adacore.com>
987 Revert the following patch (not approved yet):
988 2011-02-21 Hui Zhu <teawater@gmail.com>
989 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
990 * ax-gdb.c (gen_printf_expr_callback): New function.
991 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
992 * ax-general.c (ax_memcpy): New function.
993 (ax_print): Handle "printf".
995 * ax.h (ax_memcpy): Forward declare.
996 * common/ax.def (invalid2): Removed.
998 * printcmd.c (printcmd.h): New include.
999 (string_printf): New function.
1000 (ui_printf): Removed.
1001 (printf_command): Remove static. Call string_printf.
1002 (eval_command): Call string_printf.
1003 * printcmd.h: New file.
1004 * tracepoint.c (validate_actionline,
1005 encode_actions_1): handle printf_command.
1007 2011-02-23 Tom Tromey <tromey@redhat.com>
1009 * ax-general.c (ax_pick): Add missing newline.
1011 2011-02-23 Michael Snyder <msnyder@vmware.com>
1013 * breakpoint.c (breakpoint_1): Change first argument from an int
1014 to a char pointer, so that the function now accepts a list of
1015 breakpoints rather than just one. Use new function
1016 'number_is_in_list' to implement.
1017 (breakpoints_info): Pass char * instead of int to breakpoint_1.
1018 (watchpoints_info): Ditto.
1019 (tracepoints_info): Ditto.
1020 (maintenance_info_breakpoints): Ditto.
1021 (_initialize_breakpoint): Update help strings to reflect the fact
1022 that these functions can now take more than one argument.
1023 * cli/cli-utils.c (number_is_in_list): New function.
1024 * cli/cli-utils.h (number_is_in_list): Export.
1026 2011-02-23 Michael Snyder <msnyder@vmware.com>
1028 * memattr.c (mem_enable_command): Use get_number_or_range.
1029 (mem_disable_command): Ditto.
1030 (mem_delete_command): Ditto.
1031 (_initialize_mem): Tweak usage message to reflect multiple
1034 2011-02-22 Doug Evans <dje@google.com>
1036 Add gdb.lookup_global_symbol python function.
1038 * python/py-symbol.c (gdbpy_lookup_global_symbol): New function.
1039 * python/python-internal.h (gdbpy_lookup_global_symbol): Declare it.
1040 * python/python.c (GdbMethods): Add entry for lookup_global_symbol.
1042 2011-02-22 Tom Tromey <tromey@redhat.com>
1044 * language.c (language_class_name_from_physname): Rename
1045 'curr_language' argument to 'lang'; use in body.
1047 2011-02-22 Michael Snyder <msnyder@vmware.com>
1049 * cli/cli-utils.c (number_is_in_list): Check for zero return.
1051 2011-02-22 Pedro Alves <pedro@codesourcery.com>
1053 * frame-unwind.h: Fix comment to mention the this frame, not the
1056 2011-02-22 Tom Tromey <tromey@redhat.com>
1058 * symfile.c (auto_solib_limit): Remove.
1059 * symfile.h (auto_solib_limit): Remove.
1061 2011-02-22 Joel Brobecker <brobecker@adacore.com>
1063 * Makefile.in (INSTALLED_LIBS): Delete. Update comment.
1065 2011-02-21 Michael Snyder <msnyder@vmware.com>
1067 * gdbthread.h (print_thread_info): Change prototype.
1068 * thread.c (print_thread_info): Accept char* instead of int for
1069 requested_threads argument. Use new function number_is_in_list
1070 to determine which threads to list.
1071 (info_threads_command): Pass char* to print_thread_info.
1072 * cli/cli-utils.c (number_is_in_list): New function.
1073 * cli/cli-utils.h (number_is_in_list): Export.
1074 * mi/mi-main.c (mi_cmd_thread_info): Pass char* to
1076 (print_one_inferior): Ditto.
1077 (mi_cmd_list_thread_groups): Ditto.
1079 2011-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1081 * common/Makefile.in (CFLAGS): New.
1082 (COMPILE): Add $(CFLAGS).
1084 2011-02-21 Tom Tromey <tromey@redhat.com>
1086 * breakpoint.c (catch_syscall_command_1): Fix typo.
1088 2011-02-21 Tom Tromey <tromey@redhat.com>
1090 * reverse.c: Include cli-utils.h.
1091 * printcmd.c: Include cli-utils.h.
1092 (string_printf): Use skip_spaces.
1093 * cli/cli-utils.h: New file.
1094 * cli/cli-utils.c: New file.
1095 * cli/cli-dump.h (skip_spaces): Move to cli-utils.h.
1096 * cli/cli-dump.c (skip_spaces): Move to cli-utils.c.
1097 * breakpoint.h (get_number, get_number_or_range): Move to
1099 * breakpoint.c: Include cli-utils.h.
1100 (get_number_trailer, get_number, get_number_or_range)
1101 (ep_skip_leading_whitespace): Move to cli-utils.c.
1102 (create_breakpoint_sal, find_condition_and_thread)
1103 (decode_static_tracepoint_spec, watch_command_1)
1104 (watch_maybe_just_location, ep_parse_optional_if_clause)
1105 (catch_fork_command_1, catch_exec_command_1)
1106 (catch_syscall_command_1): Use skip_spaces, skip_to_space.
1107 * Makefile.in (SUBDIR_CLI_OBS): Add cli-utils.o.
1108 (SUBDIR_CLI_SRCS): Add cli-utils.c.
1109 (HFILES_NO_SRCDIR): Add cli-utils.h.
1110 (cli-utils.o): New target.
1112 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1114 * remote.c (remote_close): Reset INFERIOR_PTID to NULL_PTID
1115 before calling discard_all_inferiors.
1117 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
1119 * opencl-lang.c (STRUCT_OCL_TYPE): Remove.
1120 (struct builtin_opencl_type): Remove.
1121 (builtin_opencl_type): Change return type to "struct type **".
1122 (lookup_opencl_vector_type): Update caller.
1123 (opencl_language_arch_info): Copy primitive type vector from gdbarch.
1124 (build_opencl_types): Install plain array of "struct type *"
1125 instead of "struct builtin_opencl_type".
1127 2011-02-21 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1128 Ulrich Weigand <uweigand@de.ibm.com>
1130 * arm-linux-nat.c: Include "observer.h" and "gdbthread.h".
1131 (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define.
1132 (struct arm_linux_hwbp_cap): New type.
1133 (arm_linux_get_hwbp_cap): New function.
1134 (arm_linux_get_hw_breakpoint_count): Likewise.
1135 (arm_linux_get_hw_watchpoint_count): Likewise.
1136 (arm_linux_can_use_hw_breakpoint): Likewise.
1137 (arm_hwbp_type): New type.
1138 (arm_hwbp_control_t): Likewise.
1139 (struct arm_linux_hw_breakpoint): Likewise.
1140 (struct arm_linux_thread_points): Likewise.
1141 (arm_threads): New global variable.
1142 (arm_linux_find_breakpoints_by_tid): New function.
1143 (arm_hwbp_control_initialize): Likewise.
1144 (arm_hwbp_control_is_enabled): Likewise.
1145 (arm_hwbp_control_disable): Likewise.
1146 (arm_linux_hw_breakpoint_initialize): Likewise.
1147 (arm_linux_get_hwbp_type): Likewise.
1148 (arm_linux_hw_watchpoint_initialize): Likewise.
1149 (arm_linux_hw_breakpoint_equal): Likewise.
1150 (arm_linux_insert_hw_breakpoint1): Likewise.
1151 (arm_linux_remove_hw_breakpoint1): Likewise.
1152 (arm_linux_insert_hw_breakpoint): Likewise.
1153 (arm_linux_remove_hw_breakpoint): Likewise.
1154 (arm_linux_region_ok_for_hw_watchpoint): Likewise.
1155 (arm_linux_insert_watchpoint): Likewise.
1156 (arm_linux_remove_watchpoint): Likewise.
1157 (arm_linux_stopped_data_address): Likewise.
1158 (arm_linux_stopped_by_watchpoint): Likewise.
1159 (arm_linux_watchpoint_addr_within_range): Likewise.
1160 (arm_linux_new_thread): Likewise.
1161 (arm_linux_thread_exit): Likewise.
1162 (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint
1163 related target callbacks. Register arm_linux_new_thread and
1164 arm_linux_thread_exit.
1165 * arm-tdep.h (arm_pc_is_thumb): Add prototype.
1166 * arm-tdep.c (arm_pc_is_thumb): Make global.
1167 (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint.
1169 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
1171 * breakpoint.c (update_watchpoint): Do not attempt to recreate
1172 per-frame locations while within a function epilogue.
1174 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
1176 * ser-mingw.c (ser_windows_close): Reformat comment to better conform
1177 to GNU coding standards.
1179 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
1181 Allow use of mingw native on Windows 95 OS.
1182 * ser-mingw.c (CancelIo): New macro for dynamically loaded DLL entry.
1183 (ser_windows_close): Only call CancelIo if function exists.
1184 (_initialize_ser_windows): Use LoadLirary/GetProcAddress
1185 to check for existence of CancelIo function in kernel32 DLL.
1187 2011-02-21 Hui Zhu <teawater@gmail.com>
1189 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
1190 * ax-gdb.c (gen_printf_expr_callback): New function.
1191 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
1192 * ax-general.c (ax_memcpy): New function.
1193 (ax_print): Handle "printf".
1195 * ax.h (ax_memcpy): Forward declare.
1196 * common/ax.def (invalid2): Removed.
1197 (printf): New entry.
1198 * printcmd.c (printcmd.h): New include.
1199 (string_printf): New function.
1200 (ui_printf): Removed.
1201 (printf_command): Remove static. Call string_printf.
1202 (eval_command): Call string_printf.
1203 * printcmd.h: New file.
1204 * tracepoint.c (validate_actionline,
1205 encode_actions_1): handle printf_command.
1207 2011-02-19 Michael Snyder <msnyder@vmware.com>
1209 * reverse.c (delete_one_bookmark): Argument is now bookmark
1210 id rather than pointer to bookmark struct.
1211 (delete_bookmark_command): Use get_number_or_range.
1212 (goto_bookmark_command): Parse with get_number instead of strtoul.
1213 (bookmark_1): New function. Print info for one bookmark.
1214 (bookmarks_info): Use get_number_or_range and bookmark_1.
1216 2011-02-18 Michael Snyder <msnyder@vmware.com>
1218 * thread.c (info_threads_command): Re-implement using
1219 get_number_or_range.
1220 (thread_apply_command): Ditto.
1222 2011-02-18 Tom Tromey <tromey@redhat.com>
1224 * common/ax.def: New file.
1225 * ax.h (enum agent_op): Use ax.def.
1226 * ax-general.c (aop_map): Use ax.def.
1228 2011-02-18 Tom Tromey <tromey@redhat.com>
1230 * ax-general.c (aop_map): Add pick and rot.
1231 * dwarf2loc.c (compile_dwarf_to_ax) <DW_OP_over>: Reimplement.
1232 <DW_OP_rot>: Implement.
1233 * ax.h (enum agent_op) <aop_pick, aop_rot>: New constants.
1235 * ax-general.c (ax_pick): New function.
1237 2011-02-18 Tom Tromey <tromey@redhat.com>
1239 * Makefile.in (HFILES_NO_SRCDIR): Don't mention ada-operator.inc.
1241 2011-02-18 Jan Kratochvil <jan.kratochvil@redhat.com>
1242 Tom Tromey <tromey@redhat.com>
1244 * cp-support.c (make_symbol_overload_list_namespace): Do not call
1245 make_symbol_overload_list_block with NULL BLOCK.
1246 * valarith.c (unop_user_defined_p): Resolve also TYPE_CODE_TYPEDEF.
1248 2011-02-18 Pedro Alves <pedro@codesourcery.com>
1250 * breakpoint.c (get_number_trailer): No longer accept a NULL PP.
1251 * breakpoint.h (get_number_or_range): Declare.
1252 * printcmd.c (ALL_DISPLAYS): Declare.
1253 (delete_display): Reimplement taking a display pointer.
1254 (undisplay_command): Accept a range of displays to delete, using
1255 get_number_or_range.
1257 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1259 * c-valprint.c (c_val_print): Add embedded_offset to address
1260 for arrays of unspecified length.
1261 * p-valprint.c (pascal_val_print): Likewise.
1263 2011-02-18 Yao Qi <yao@codesourcery.com>
1265 * gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ...
1266 (arm_process_displaced_insn): .. here. Remove parameter INSN.
1267 (thumb_process_displaced_insn): New.
1268 * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update
1269 call to arm_process_displaced_insn.
1270 * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn.
1272 2011-02-17 Tom Tromey <tromey@redhat.com>
1274 * dwarf2loc.h (dwarf2_compile_expr_to_ax): Declare.
1275 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Rename from
1276 compile_dwarf_to_ax. No longer static. Call
1277 dwarf2_compile_cfa_to_ax.
1278 (locexpr_tracepoint_var_ref): Update.
1279 (loclist_tracepoint_var_ref): Update.
1280 * dwarf2-frame.h (dwarf2_compile_cfa_to_ax): Declare.
1281 * dwarf2-frame.c (execute_cfa_program): Remove 'this_frame'
1282 argument; add 'gdbarch' and 'pc'.
1283 (dwarf2_compile_cfa_to_ax): New function.
1284 (dwarf2_frame_cache): Update.
1286 2011-02-17 Joel Brobecker <brobecker@adacore.com>
1288 * ada-lang.c (ada_type_of_array): Fix the size of the array
1289 in the case of an unconstrained packed array.
1291 2011-02-17 Yao Qi <yao@codesourcery.com>
1293 * common/Makefile.in: Add more targets for make.
1295 2011-02-16 Tom Tromey <tromey@redhat.com>
1297 * dwarf2loc.c (unimplemented): Fix typo.
1299 2011-02-16 Tom Tromey <tromey@redhat.com>
1301 * dwarf2loc.c (unimplemented): Handle unnamed opcodes.
1302 (compile_dwarf_to_ax) <default>: Use unimplemented.
1303 <DW_OP_deref>: Update.
1304 (disassemble_dwarf_expression): Update.
1305 * dwarf2read.c (dwarf_stack_op_name): Remove 'def' argument.
1306 (decode_locdesc): Update.
1307 * dwarf2expr.h (dwarf_stack_op_name): Update.
1309 2011-02-16 Tom Tromey <tromey@redhat.com>
1311 * ax.h (struct aop_map) <name>: Now const.
1313 2011-02-16 Tom Tromey <tromey@redhat.com>
1315 * ax-gdb.c.c (gen_expr) <UNOP_MEMVAL>: Handle value kinds other
1318 2011-02-16 Yao Qi <yao@codesourcery.com>
1320 * infrun.c (get_displaced_step_closure_by_addr): New.
1321 * inferior.h: Declare it.
1322 * arm-tdep.c: (arm_pc_is_thumb): Call
1323 get_displaced_step_closure_by_addr. Adjust MEMADDR if it
1326 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1327 Jan Kratochvil <jan.kratochvil@redhat.com>
1330 * tracepoint.c (memrange_sortmerge): Fix list A's end calculation.
1332 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1333 Jan Kratochvil <jan.kratochvil@redhat.com>
1335 * value.c (value_contents_copy_raw): Extend describing comment.
1336 Assert that the destination contents we're overwriting are wholly
1338 (value_contents_copy): Extend describing comment.
1340 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1341 Jan Kratochvil <jan.kratochvil@redhat.com>
1343 * value.c (value_available_contents_eq): Remove redundant local
1344 variables. Fix available contents comparision.
1345 * value.h (value_available_contents_eq): Extend describing
1348 2011-02-16 Yao Qi <yao@codesourcery.com>
1350 * thread.c (info_threads_command): Add missing i18n markup and remove
1353 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
1355 * breakpoint.c (longjmp_names): New variable.
1356 (struct breakpoint_objfile_data): New type.
1357 (breakpoint_objfile_key): New variable.
1358 (msym_not_found): New variable.
1359 (msym_not_found_p): New predicate.
1360 (get_breakpoint_objfile_data): New function.
1361 (create_overlay_event_breakpoint): Check per-objfile cache for
1363 (create_longjmp_master_breakpoint): Likewise.
1364 (create_std_terminate_master_breakpoint): Likewise.
1365 (create_exception_master_breakpoint): Likewise.
1366 (_initialize_breakpoint): Register per-objfile data key.
1368 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
1370 * breakpoint.c ((create_overlay_event_breakpoint): Const-propagate
1372 (create_longjmp_master_breakpoint): Loop over longjmp names.
1373 (create_std_terminate_master_breakpoint): Const-propagate parameter
1375 (update_breakpoints_after_exec): Adjust.
1376 (breakpoint_re_set): Adjust.
1378 2011-02-15 Michael Snyder <msnyder@vmware.com>
1380 * thread.c (info_threads_command): Process arg as thread id,
1381 or list of thread ids.
1382 (thread_find_command): New command.
1383 (_initialize_thread): Document argument for info threads.
1384 Document 'thread find' command.
1385 * NEWS: Document new command "thread find".
1387 2011-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1389 * Makefile.in (ACLOCAL_AMFLAGS): Add `-I ../config'.
1390 * aclocal.m4: Regenerated with aclocal-1.11.1.
1391 * common/configure: Regenerate with autoconf-2.64.
1393 2011-02-15 Ken Werner <ken.werner@de.ibm.com>
1395 * opencl-lang.c (build_opencl_types): Set the size of the built-in
1396 bool data type to a size of one byte.
1398 2011-02-15 Pedro Alves <pedro@codesourcery.com>
1399 Jan Kratochvil <jan.kratochvil@redhat.com>
1401 * target.c (memory_xfer_live_readonly_partial): Document where to
1402 look for interface description.
1404 2011-02-15 Yao Qi <yao@codesourcery.com>
1407 * arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in
1408 order to store PC value on stack instead of text section.
1410 2011-02-15 Thiago Jung Bauermann <bauerman@br.ibm.com>
1412 * rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for
1413 the EFP register set size.
1414 (efpr_pseudo_register_read): Use regcache_raw_read_part to read
1415 data from the VMX register.
1416 (efpr_pseudo_register_write): Use regcache_raw_write_part to read
1417 and write data from/to the VMX register.
1419 2011-02-14 Michael Snyder <msnyder@vmware.com>
1421 * command.h (enum command_class): New class 'no_set_class', for
1422 "show" commands without a corresponding "set" command.
1423 * value.c (_initialize_values): Use 'no_set_class' for "show values".
1424 * copying.c (_initialize_copying): Ditto for "show copying" and
1426 * cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
1428 * cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
1429 which there is no corresponding "set" command (eg. "show copying").
1431 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1432 Jan Kratochvil <jan.kratochvil@redhat.com>
1434 * exec.c (section_table_available_memory): Change `len' parameter
1436 * exec.h (section_table_available_memory): Ditto.
1437 * value.h (read_value_memory): Rename the `offset' parameter to
1440 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1441 Jan Kratochvil <jan.kratochvil@redhat.com>
1443 * memrange.c (compare_mem_ranges): Mention sort order in
1445 (normalize_mem_ranges): Add comment. Fix ra->length calculation.
1446 * tracepoint.c (traceframe_available_memory): Extend comment to
1447 mention what happens to RESULT when the target does not support
1450 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1451 Jan Kratochvil <jan.kratochvil@redhat.com>
1453 * value.c (mark_value_bytes_unavailable): Fix indexing the `bef'
1456 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1458 * value.c (value_bits_valid, value_bits_synthetic_pointer):
1459 No longer handle NULL values.
1461 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1463 * exceptions.h (NOT_AVAILABLE_ERROR): New error.
1464 * value.c: Include "exceptions.h".
1465 (require_available): Throw NOT_AVAILABLE_ERROR instead of a
1467 * cp-abi.c: Include gdb_assert.h.
1468 (baseclass_offset): Add `embedded_offset' and `val' parameters.
1469 Assert the method is implemented. Wrap NOT_AVAILABLE_ERROR
1471 * cp-abi.h (baseclass_offset): Add `embedded_offset' and `val'
1472 parameters. No longer returns -1 on error.
1473 (struct cp_abi_ops) <baseclass_offset>: Add `embedded_offset' and
1475 * cp-valprint.c: Include exceptions.h.
1476 (cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching
1477 the baseclass_offset. Handle unavailable base classes. Use
1478 val_print_invalid_address.
1479 * p-valprint.c: Include exceptions.h.
1480 (pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors
1481 when fetching the baseclass_offset. No longer expect
1482 baseclass_offset returning -1. Handle unavailable base classes.
1483 Use val_print_invalid_address.
1484 * valops.c (dynamic_cast_check_1): Rename `contents' parameter to
1485 `valaddr' parameter, and change its type to gdb_byte pointer. Add
1486 `embedded_offset' and `val' parameters. Adjust.
1487 (dynamic_cast_check_2): Rename `contents' parameter to `valaddr'
1488 parameter, and change its type to gdb_byte pointer. Add
1489 `embedded_offset' and `val' parameters. Adjust. No longer expect
1490 baseclass_offset returning -1.
1491 (value_dynamic_cast): Use value_contents_for_printing rather than
1492 value_contents. Adjust.
1493 (search_struct_field): No longer expect baseclass_offset returning
1495 (search_struct_method): If reading memory from the target is
1496 necessary, wrap it in a new value to pass to baseclass_offset. No
1497 longer expect baseclass_offset returning -1.
1498 (find_method_list): No longer expect baseclass_offset returning
1499 -1. Use value_contents_for_printing rather than value_contents.
1500 * valprint.c (val_print_invalid_address): New function.
1501 * valprint.h (val_print_invalid_address): Declare.
1502 * gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset'
1503 and `val' parameters. No longer expect baseclass_offset returning
1505 * gnu-v2-abi.c: Include "exceptions.h".
1506 (gnuv2_baseclass_offset): Add `embedded_offset' and `val'
1507 parameters. Handle unavailable memory. Recurse through
1508 gnuv2_baseclass_offset directly, rather than through
1509 baseclass_offset. No longer returns -1 on not found, instead
1511 * gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and
1512 `val' parameters. Adjust.
1514 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1516 * tracepoint.c (memrange_sortmerge): Don't merge ranges that are
1517 almost but not quite adjacent.
1519 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1521 * value.h (value_entirely_available): Declare.
1522 * value.c (value_entirely_available): New function.
1523 * c-valprint.c (c_value_print): Don't try fetching the pointer's
1524 real type if the pointer is unavailable.
1526 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1528 * valops.c (value_repeat): Use read_value_memory instead of
1531 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1533 * value.h (value_contents_copy, value_contents_copy_raw): Declare.
1534 * value.c (value_contents_copy_raw, value_contents_copy): New
1536 (value_primitive_field): Use value_contents_copy_raw instead of
1538 * valops.c (value_fetch_lazy): Use value_contents_copy instead of
1540 (value_array, value_slice): Ditto.
1541 * valarith.c (value_subscripted_rvalue): Use
1542 value_contents_copy_raw instead of memcpy.
1544 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1546 <unavailable> references.
1548 * valops.c (get_value_at): Use value_from_contents_and_address,
1549 avoiding read_memory.
1551 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1553 * c-valprint.c (c_val_print): Print a string with unavailable
1554 contents as an array.
1556 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1558 * value.h (unpack_bits_as_long): Delete declaration.
1559 (unpack_value_bits_as_long): Declare.
1560 (unpack_value_field_as_long): Declare.
1561 (value_field_bitfield): Declare.
1562 * value.c (unpack_bits_as_long): Rename to...
1563 (unpack_value_bits_as_long_1): ... this. Add embedded_offset and
1564 value parameters. Return the extracted result in a new output
1565 parameter. If the value contents are unavailable, return false,
1566 otherwise return true.
1567 (unpack_value_bits_as_long): New.
1568 (unpack_field_as_long): Rename to...
1569 (unpack_value_field_as_long_1): ... this. Add embedded_offset and
1570 Add embedded_offset and value parameters. Return the extracted
1571 result in a new output parameter. If the value contents are
1572 unavailable, return false, otherwise return true.
1573 (unpack_value_field_as_long): New.
1574 (unpack_field_as_long_1): New.
1575 (unpack_field_as_long): Reimplement as wrapper around
1576 unpack_value_field_as_long_1.
1577 (value_field_bitfield): New function.
1578 * valops.c (value_fetch_lazy): When fetching a bitfield, use
1579 unpack_value_bits_as_long. Mark the value as unavailable, if it
1581 * jv-valprint.c (java_print_value_fields): Use
1582 value_field_bitfield.
1583 * p-valprint.c (pascal_object_print_value_fields): Use
1584 value_field_bitfield.
1585 * cp-valprint.c (cp_print_value_fields): Use value_field_bitfield.
1587 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1589 * value.c (get_internalvar_integer): Also return the int value of
1590 TYPE_CODE_INT INTERNALVAR_VALUE values.
1591 (set_internalvar): Don't special case TYPE_CODE_INT.
1593 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1595 * value.c (struct internalvar) <enum internalvar_kind>: Remove
1596 INTERNALVAR_POINTER.
1598 (value_of_internalvar): Remove INTERNALVAR_POINTER handling.
1599 (set_internalvar): Remove special TYPE_CODE_PTR handling.
1600 (preserve_one_internalvar): Remove INTERNALVAR_POINTER handling.
1602 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1604 * value.h (value_available_contents_eq): Declare.
1605 * value.c (find_first_range_overlap): New function.
1606 (value_available_contents_eq): New function.
1607 * valprint.c (val_print_array_elements): Use
1608 value_available_contents_eq.
1609 * ada-valprint.c (val_print_packed_array_elements): Use
1610 value_available_contents_eq.
1611 * jv-valprint.c (java_value_print): Use
1612 value_available_contents_eq.
1614 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1616 * target.c (target_read_live_memory): New function.
1617 (memory_xfer_live_readonly_partial): New.
1618 (memory_xfer_partial): If reading from a traceframe, fallback to
1619 reading unavailable read-only memory from read-only regions of
1621 * tracepoint.c (disconnect_tracing): Adjust.
1622 (set_current_traceframe): New, factored out from
1623 set_traceframe_number.
1624 (set_traceframe_number): Reimplement to only change the traceframe
1625 number on the GDB side.
1626 (do_restore_current_traceframe_cleanup): Adjust.
1627 (make_cleanup_restore_traceframe_number): New.
1628 (cur_traceframe_number): New global.
1629 (tfile_open): Set cur_traceframe_number to no traceframe.
1630 (set_tfile_traceframe): New function.
1631 (tfile_trace_find): If looking up a traceframe using any method
1632 other than by number, make sure the current tfile traceframe
1633 matches gdb's current traceframe. Update the current tfile
1634 traceframe if the lookup succeeded.
1635 (tfile_fetch_registers, tfile_xfer_partial)
1636 (tfile_get_trace_state_variable_value): Make sure the remote
1637 traceframe matches gdb's current traceframe.
1638 * remote.c (remote_traceframe_number): New global.
1639 (remote_open_1): Set it to -1.
1640 (set_remote_traceframe): New function.
1641 (remote_fetch_registers, remote_store_registers)
1642 (remote_xfer_memory, remote_xfer_partial)
1643 (remote_get_trace_state_variable_value): Make sure the remote
1644 traceframe matches gdb's current traceframe.
1645 (remote_trace_find): If looking up a traceframe using any method
1646 other than by number, make sure the current remote traceframe
1647 matches gdb's current traceframe. Update the current remote
1648 traceframe if the lookup succeeded.
1649 * infrun.c (fetch_inferior_event): Adjust.
1650 * tracepoint.h (set_current_traceframe): Declare.
1651 (get_traceframe_number, set_traceframe_number): Add describing
1654 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1656 Mark pieces of values as unavailable if the corresponding memory
1659 * valops.c: Include tracepoint.h.
1660 (value_fetch_lazy): Use read_value_memory.
1661 (read_value_memory): New.
1662 * value.h (read_value_memory): Declare.
1663 * dwarf2loc.c (read_pieced_value): Use read_value_memory.
1664 * exec.c (section_table_available_memory): New function.
1665 * exec.h (section_table_available_memory): Declare.
1667 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1669 * Makefile.in (SFILES): Add memrange.c.
1670 (HFILES_NO_SRCDIR): Add memrange.h.
1671 (COMMON_OBS): Add memrange.o.
1672 * memrange.c: New file.
1673 * memrange.h: New file.
1674 * tracepoint.c: Include memrange.h.
1675 (struct mem_range): Delete.
1676 (mem_range_s): Delete.
1677 (traceframe_available_memory): New function.
1678 * tracepoint.h (traceframe_available_memory): Declare.
1680 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1682 * target.h (struct traceframe_info): Forward declare.
1683 (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
1684 (struct target_ops) <to_traceframe_info>: New field.
1685 (target_traceframe_info): New.
1686 * target.c (update_current_target): Inherit and default
1688 * remote.c (PACKET_qXfer_traceframe_info): New.
1689 (remote_protocol_features): Register qXfer:traceframe-info:read.
1690 (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
1691 (remote_traceframe_info): New.
1692 (init_remote_ops): Install it.
1693 (_initialize_remote): Install "set/show remote traceframe-info"
1695 * tracepoint.h (parse_traceframe_info): Declare.
1696 * tracepoint.c (struct mem_range): New.
1697 (mem_range_s): New typedef.
1698 (struct traceframe_info): New.
1699 (traceframe_info): New global.
1700 (free_traceframe_info): New function.
1701 (clear_traceframe_info): New function.
1702 (start_tracing, tfind_1, set_traceframe_number): Clear traceframe
1704 (build_traceframe_info): New function.
1705 (tfile_traceframe_info): New function.
1706 (init_tfile_ops): Install tfile_traceframe_info.
1707 (traceframe_info_start_memory, free_result): New functions.
1708 (memory_attributes, traceframe_info_elements): New globals.
1709 (parse_traceframe_info, get_traceframe_info): New functions.
1710 * features/traceframe-info.dtd: New file.
1711 * Makefile.in (XMLFILES): Add traceframe-info.dtd.
1713 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1715 Base support for <unavailable> value contents.
1717 * value.h (value_bytes_available): Declare.
1718 (mark_value_bytes_unavailable): Declare.
1719 * value.c (struct range): New struct.
1720 (range_s): New typedef.
1721 (ranges_overlap): New function.
1722 (range_lessthan): New function.
1723 (ranges_contain_p): New function.
1724 (struct value) <unavailable>: New field.
1725 (value_bytes_available): New function.
1726 (mark_value_bytes_unavailable): New function.
1727 (require_not_optimized_out): Constify parameter.
1728 (require_available): New function.
1729 (value_contents_all, value_contents): Require all bytes be
1731 (value_free): Free `unavailable'.
1732 (value_copy): Copy `unavailable'.
1733 * valprint.h (val_print_unavailable): Declare.
1734 * valprint.c (valprint_check_validity): Rename `offset' parameter
1735 to `embedded_offset'. If printing a scalar, check whether the
1736 value chunk is available.
1737 (val_print_unavailable): New.
1738 (val_print_scalar_formatted): Check whether the value is
1740 * python/py-prettyprint.c (apply_val_pretty_printer): Refuse
1741 pretty-printing unavailable values.
1743 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1745 Fix const/volatile qualifiers of C++ types, PR c++/12328.
1746 * c-typeprint.c (c_type_print_args): Update the function comment. New
1747 variable param_type, initialize it. Remove const/volatile qualifiers
1748 for language_cplus and !show_artificial. Use param_type.
1750 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1752 * symtab.c (find_pc_sect_line): New variable objfile, initialize it
1753 from S. Iterate S using ALL_OBJFILE_SYMTABS. Verify BV for each S.
1754 * symtab.h (struct symtab) <next>: Comment extension.
1756 2011-02-12 Yao Qi <yao@codesourcery.com>
1758 * Makefile.in (CLEANDIRS): Remove duplicated common dir.
1760 2011-02-11 Yao Qi <yao@codesourcery.com>
1762 * common/Makefile.in: Add copyright header.
1764 2011-02-11 Pedro Alves <pedro@codesourcery.com>
1766 * infrun.c (proceed): Move switching out and in of tfind mode from
1768 (fetch_inferior_event): ... to here.
1770 2011-02-11 Yao Qi <yao@codesourcery.com>
1772 * Makefile.in: Remove signals.o from COMMON_OBS. Link
1774 * configure.ac: Add common to sub dir.
1775 * configure: Regenerate.
1777 2011-02-11 Yao Qi <yao@codesourcery.com>
1781 * common/Makefile.in: New.
1782 * common/configure.ac: New.
1783 * common/aclocal.m4: New.
1784 * common/configure: Generate.
1786 2011-02-10 Pedro Alves <pedro@codesourcery.com>
1788 * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
1789 side of the parenthesis.
1792 2010-07-13 Jakub Jelinek <jakub@redhat.com>
1793 * vec.h (VEC_block_remove): Fix comment.
1795 2011-02-08 Michael Snyder <msnyder@vmware.com>
1797 * linux-nat.c (linux_nat_filter_event): Fix typo in comment.
1799 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1801 * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
1802 in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
1805 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1808 * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
1810 (i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
1811 (i386_process_record) <0x0f3807>: Fix the comment to phsubsw.
1813 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1815 * dwarf2read.c (read_subroutine_type): Set special calling
1816 convention flag for functions compiled by IBM XL C for OpenCL.
1817 * ppc-sysv-tdep.c: Include "dwarf2.h"
1818 (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
1820 (do_ppc_sysv_return_value): Add FUNC_TYPE argument. Implement
1821 IBM OpenCL vector types calling convention.
1822 (ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
1823 (ppc_sysv_abi_broken_return_value): Likewise.
1824 (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
1825 types calling convention.
1826 (ppc64_sysv_abi_return_value): Likewise.
1827 * spu-tdep.c: Include "dwarf2.h"
1828 (spu_return_value): Implement IBM OpenCL vector types calling
1831 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1833 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
1834 correct ABI for AltiVec vector arguments.
1836 2011-02-07 Pedro Alves <pedro@codesourcery.com>
1838 * valprint.c (val_print): Extend comment.
1839 * ada-valprint.c (ada_valprint): Rewrite comment deferring
1840 interface explanation to val_print.
1841 (ada_val_print_array): Adjust comment to current interface.
1842 (print_field_values): Adjust comment to current interface.
1843 * c-valprint.c (c_val_print): Rewrite comment deferring interface
1844 explanation to val_print.
1845 * f-valprint.c (f_val_print): Ditto.
1846 * jv-valprint.c (java_val_print): Ditto.
1847 * m2-valprint.c (m2_val_print): Ditto.
1848 * p-valprint.c (pascal_val_print): Ditto.
1850 2011-02-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
1852 * breakpoint.c (parse_breakpoint_sals): Fix description.
1854 2011-02-04 Sami Wagiaalla <swagiaal@redhat.com>
1855 Oguz Kayral <oguzkayral@gmail.com>
1857 * python/py-inferior.c (python_on_normal_stop): New function.
1858 (python_on_resume): New function.
1859 (python_inferior_exit): New function.
1860 (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
1861 inferior_exit observers.
1862 * python/py-evtregistry.c: New file.
1863 * python/py-threadevent.c : New file.
1864 * python/py-event.c: New file.
1865 * python/py-evts.c: New file.
1866 * python/py-continueevent.c: New file.
1867 * python/py-bpevent.c: New file.
1868 * python/py-signalevent.c: New file.
1869 * python/py-exetiedevent.c: New file.
1870 * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
1871 Move struct breakpoint_object from here...
1872 * python/python-internal.h: ... to here.
1873 * python/py-event.h: New file.
1874 * python/py-events.h: New file.
1875 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
1876 py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
1877 py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
1878 (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
1879 py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
1880 py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
1881 Add build rules for all the above.
1883 2011-02-04 Tom Tromey <tromey@redhat.com>
1885 * dwarf2read.c (dwarf2_section_empty_p): New function.
1886 (dwarf2_read_section): Use dwarf2_section_empty_p.
1887 (dwarf2_section_size): New function.
1888 (dwarf2_get_section_info): Unconditionally read section.
1889 (dwarf2_read_index): Use dwarf2_section_empty_p.
1890 (partial_read_comp_unit_head): Use dwarf2_section_size.
1891 (dwarf2_symbol_mark_computed): Likewise.
1893 2011-02-04 David Daney <ddaney@caviumnetworks.com>
1895 * NEWS: Add item for "catch syscall" on mips*-linux* targets.
1897 2011-02-04 David Daney <ddaney@caviumnetworks.com>
1899 * mips-linux-tdep.c: Include xml-syscall.h.
1900 (mips_linux_get_syscall_number): New function.
1901 (mips_linux_init_abi): Add calls to
1902 mips_linux_get_syscall_number() and set_xml_syscall_file_name().
1903 * data-directory/Makefile.in (SYSCALLS_FILES): Add
1904 mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
1905 * syscalls/mips-n32-linux.xml: New file.
1906 * syscalls/mips-n64-linux.xml: New file.
1907 * syscalls/mips-o32-linux.xml: New file.
1909 2011-02-04 Ulrich Weigand <ulrich.weigand@linaro.org>
1911 * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
1912 Complain about inverted range entries.
1913 (dwarf2_record_block_ranges): Likewise.
1915 2011-02-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
1918 * breakpoint.c (update_watchpoint): Fix name of the
1919 update_global_location_list function.
1920 (print_one_breakpoint): Fix typo.
1921 (_initialize_breakpoint): Remove extra space in hbreak help
1923 * breakpoint.h (struct bp_location) <length>: Fix field
1926 2011-02-04 Pedro Alves <pedro@codesourcery.com>
1928 * regcache.c (registers_changed_ptid): Don't explictly always
1929 clear `current_regcache'. Only clear current_thread_ptid and
1930 current_thread_arch when PTID matches. Only reinit the frame
1931 cache if PTID matches the current inferior_ptid. Move alloca(0)
1933 (registers_changed): ... here.
1935 2011-02-03 Ulrich Weigand <ulrich.weigand@linaro.org>
1937 * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
1938 starts with __stack_chk_guard as stack guard symbol.
1940 2011-02-03 Andrew Burgess <aburgess@broadcom.com>
1942 * disasm.c (compare_lines): Handle the end of sequence markers
1943 within the line table to better support disassembling over
1944 compilation unit boundaries.
1946 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1948 * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
1949 arguments. Skip in-prologue calls to glibc __aeabi_read_tp
1950 implementation even if no symbols are available.
1951 (thumb_analyze_prologue): Update call to skip_prologue_function.
1952 (arm_analyze_prologue): Likewise.
1954 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1956 * arm-tdep.c: Include "observer.h".
1957 (arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
1958 (arm_exidx_data_key): New static variable.
1959 (struct arm_exidx_entry, arm_exidx_entry_s): New data types.
1960 (struct arm_exidx_data): Likewise.
1961 (arm_exidx_data_free): New function.
1962 (arm_compare_exidx_entries): Likewise.
1963 (arm_obj_section_from_vma): Likewise.
1964 (arm_exidx_new_objfile): Likewise.
1965 (arm_find_exidx_entry): Likewise.
1966 (arm_exidx_fill_cache): Likewise.
1967 (arm_exidx_unwind_sniffer): Likewise.
1968 (arm_exidx_unwind): New global variable.
1969 (arm_gdbarch_init): Append unwinder arm_exidx_unwind.
1970 (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
1971 observer. Register arm_exidx_data_key as objfile data.
1973 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1975 * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
1976 due to accessing uninitialized variable. Fix indentation.
1978 2011-02-02 Pedro Alves <pedro@codesourcery.com>
1980 * c-valprint.c (c_value_print): When doing virtual base pointer
1981 adjustment, create a new value with adjusted contents rather than
1982 changing the contents of the value being printed (and getting it
1985 2011-02-02 Pedro Alves <pedro@codesourcery.com>
1987 * xml-support.c (xml_find_attribute): New.
1988 (xinclude_start_include): Use it.
1989 * xml-support.h (xml_find_attribute): Declare.
1990 * memory-map.c (memory_map_start_memory)
1991 (memory_map_start_property): Use xml_find_attribute.
1992 * osdata.c (osdata_start_osdata, osdata_start_column): Use
1994 * remote.c (start_thread): Use xml_find_attribute.
1995 * solib-target.c (library_list_start_segment)
1996 (library_list_start_section, library_list_start_library)
1997 (library_list_start_list): Use xml_find_attribute.
1998 * xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
1999 (tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
2000 (tdesc_start_field): Use xml_find_attribute.
2002 2011-02-02 Ulrich Weigand <uweigand@de.ibm.com>
2004 * opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
2005 (BUILD_OCL_VTYPES): Update.
2007 2011-02-02 Joel Brobecker <brobecker@adacore.com>
2009 * configure.ac: Work around non-GNU sed limitation when computing
2010 python version number.
2011 * configure: Regenerate.
2013 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2015 Fix debug printing of TYPE_INSTANCE.
2016 * expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
2017 (dump_subexp_body_standard) <TYPE_INSTANCE>: New.
2019 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2021 Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
2022 OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
2023 OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
2024 * ada-operator.inc: Rename the file to ...
2025 * ada-operator.def: ... here, wrap all the entries by macro OP.
2026 * expprint.c (op_name_standard): Remove all the entries. Include
2027 "std-operator.def" instead.
2028 * expression.h (enum exp_opcode): Include "std-operator.def" and
2029 "ada-operator.def". Move all the entries ...
2030 * std-operator.def: ... here, wrap all the entries by macro OP.
2032 2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com>
2034 * breakpoint.h (remove_jit_event_breakpoints): New prototype.
2035 * breakpoint.c (remove_jit_event_breakpoints): New function.
2036 * jit.c (jit_descriptor_addr): Delete.
2037 (registering_code): Delete.
2038 (clear_int): Delete.
2039 (jit_inferior_data): New variable.
2040 (struct jit_inferior_data): New type.
2041 (get_jit_inferior_data): New function.
2042 (jit_inferior_data_cleanup): New function.
2043 (jit_read_descriptor): Adjust.
2044 (jit_register_code): Adjust.
2045 (jit_breakpoint_re_set_internal): New function; move code here ...
2046 (jit_inferior_init): ... from here.
2047 (jit_breakpoint_re_set): Adjust.
2048 (jit_reset_inferior_data_and_breakpoints): New function.
2049 (jit_inferior_created_observer): Adjust.
2050 (jit_inferior_exit_hook): Adjust.
2051 (jit_executable_changed_observer): New function.
2052 (jit_event_handler): Adjust.
2053 (_initialize_jit): Adjust.
2055 2011-01-31 Michael Snyder <msnyder@vmware.com>
2057 * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
2060 2011-01-31 Tom Tromey <tromey@redhat.com>
2063 * python/python.c (execute_gdb_command): Call
2064 prevent_dont_repeat.
2065 * top.c (suppress_dont_repeat): New global.
2066 (dont_repeat): Use it.
2067 (prevent_dont_repeat): New function.
2068 * command.h (prevent_dont_repeat): Declare.
2070 2011-01-31 Tom Tromey <tromey@redhat.com>
2072 * infcmd.c (finish_backward): Use breakpoint_set_silent.
2073 * python/py-breakpoint.c (bppy_set_silent): Use
2074 breakpoint_set_silent.
2075 (bppy_set_thread): Use breakpoint_set_thread.
2076 (bppy_set_task): Use breakpoint_set_task.
2077 * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
2078 (breakpoint_set_task): Declare.
2079 (make_breakpoint_silent): Remove.
2080 * breakpoint.c (breakpoint_set_silent): New function.
2081 (breakpoint_set_thread): Likewise.
2082 (breakpoint_set_task): Likewise.
2083 (make_breakpoint_silent): Remove.
2085 2011-01-31 Tom Tromey <tromey@redhat.com>
2087 * breakpoint.h (user_breakpoint_p): Declare.
2088 * breakpoint.c (user_breakpoint_p): New function.
2089 (breakpoint_1): Use it.
2090 (save_breakpoints): Likewise.
2092 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2094 * configure.ac: Add handling of Python distribution on Windows.
2095 * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
2096 sysconfig variables are not defined, then do not use them.
2097 On Windows, if LIBPL is not defined, then use prefix + '/libs'
2098 instead. On Windows, return all paths using forward-slashes
2099 rather than backslashes.
2101 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2103 * configure.ac: Remove fallback behavior for building
2104 against Python. Remove tweaking of Python include path.
2105 Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
2106 (AC_TRY_LIBPYTHON): Adjust program used in linking test.
2107 If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
2108 Always restore CPPFLAGS and LIBS after linking test.
2109 * configure: Regenerated.
2110 * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
2111 (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
2112 * python/python-internal.h: Adjust includes of Python .h files.
2114 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2116 * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup
2119 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2121 * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
2124 2011-01-31 Yao Qi <yao@codesourcery.com>
2126 * arm-linux-nat.c: Update calls to regcache_register_status
2127 instead of regcache_valid_p.
2128 * aix-thread.c: Likewise.
2129 * i386gnu-nat.c: Likewise.
2131 2011-01-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2134 * valops.c (compare_parameters): Verify TYPE_NFIELDS before
2135 touching TYPE_FIELD_ARTIFICIAL.
2137 2011-01-28 Richard Earnshaw <rearnsha@arm.com>
2139 * MAINTAINERS: Move myself from Responsible Maintainers to Authorized
2142 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2144 * tracepoint.c (tfile_xfer_partial): If there's no traceframe
2145 selected, don't try iterating over the traceframe's blocks.
2146 (tfile_has_stack): If there's no traceframe selected, then there's
2148 (tfile_has_registers): If there's no traceframe selected, then
2149 there's no registers.
2151 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2153 * target.c (memory_xfer_partial): No need to restore shadows if we
2154 haven't read anything.
2156 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2158 * mips-tdep.c (mips_print_register): Use get_frame_register_value
2159 and val_print_scalar_formatted.
2161 2011-01-27 Pedro Alves <pedro@codesourcery.com>
2163 * tracepoint.c (tfile_read): New.
2164 (tfile_open): Use it.
2165 (tfile_get_traceframe_address): Use it.
2166 (tfile_trace_find): Use it.
2167 (walk_blocks_callback_func): New typedef.
2168 (match_blocktype): New function.
2169 (traceframe_walk_blocks): New function.
2170 (traceframe_find_block_type): New function.
2171 (tfile_fetch_registers, tfile_xfer_partial)
2172 (tfile_get_trace_state_variable_value): Use
2173 traceframe_find_block_type and tfile_read.
2175 2011-01-26 Kevin Buettner <kevinb@redhat.com>
2177 * remote-mips.c: Add internationalization mark ups. Remove
2178 trailing \n from already marked up strings.
2180 2011-01-26 Tom Tromey <tromey@redhat.com>
2182 * python/py-prettyprint.c (print_string_repr): Clear
2183 'addressprint' option when calling val_print_string.
2184 (print_children): Handle Val_pretty_default. Clear 'addressprint'
2185 option when calling val_print_string.
2187 2011-01-26 Tom Tromey <tromey@redhat.com>
2189 * python/python.c (gdbpy_solib_name): Use gdb_py_longest and
2191 * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New
2193 (gdb_py_longest, gdb_py_ulongest): New typedefs.
2194 (gdb_py_long_from_longest, gdb_py_long_from_ulongest)
2195 (gdb_py_long_as_ulongest): New defines.
2196 (gdb_py_object_from_longest, gdb_py_object_from_ulongest)
2197 (gdb_py_int_as_long): Declare.
2198 * python/py-value.c (valpy_lazy_string): Use gdb_py_longest,
2199 GDB_PY_LL_ARG, gdb_py_object_from_longest.
2200 (valpy_long): Add comment.
2201 * python/py-utils.c (get_addr_from_python): Use
2202 gdb_py_long_as_ulongest. Handle overflow properly.
2203 (gdb_py_object_from_longest): New function.
2204 (gdb_py_object_from_ulongest): Likewise.
2205 (gdb_py_int_as_long): Likewise.
2206 * python/py-type.c (typy_array): Use gdb_py_int_as_long.
2207 * python/py-symtab.c (salpy_get_pc): Use
2208 gdb_py_long_from_ulongest.
2209 (salpy_get_line): Use PyInt_FromLong.
2210 * python/py-param.c (set_parameter_value): Use
2212 * python/py-lazy-string.c (stpy_get_address): Use
2213 gdb_py_long_from_ulongest.
2214 * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest.
2215 * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long.
2216 * python/py-breakpoint.c (bppy_set_thread): Use
2218 (bppy_set_task): Likewise.
2219 (bppy_set_ignore_count): Likewise.
2220 (bppy_set_hit_count): Likewise.
2221 * python/py-block.c (blpy_get_start): Use
2222 gdb_py_object_from_ulongest.
2223 (blpy_get_end): Likewise.
2224 (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG.
2226 2011-01-25 Mathieu Lacage <mathieu.lacage@inria.fr>
2229 * gdb/objfiles.h (struct objfile) <addr_low>: New field.
2230 * gdb/solib.c (solib_read_symbols): Check for addr_low in
2231 equality test for objfile, initialize addr_low if needed.
2233 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2235 * tui/tui-regs.c (tui_register_format): Remove dead code.
2237 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2239 * printcmd.c (print_formatted): Use val_print_scalar_formatted
2240 instead of print_scalar_formatted.
2241 (print_scalar_formatted): Don't handle 's' format strings here,
2242 and add an assertion that we never see such format here.
2243 * valprint.h (val_print_scalar_formatted): Declare.
2244 * valprint.c (val_print_scalar_formatted): New.
2245 * c-valprint.c (c_val_print): Use val_print_scalar_formatted
2246 instead of print_scalar_formatted.
2247 * jv-valprint.c (java_val_print): Ditto.
2248 * p-valprint.c (pascal_val_print): Ditto.
2249 * ada-valprint.c (ada_val_print_1): Ditto.
2250 * f-valprint.c (f_val_print): Ditto.
2251 * infcmd.c (registers_info): Ditto.
2252 * m2-valprint.c (m2_val_print): Ditto.
2254 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2256 * m2-valprint.c (print_unbounded_array): Pass
2257 value_contents_for_printing rather than value_contents, to
2258 m2_print_array_contents. Also pass in the value.
2260 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com>
2262 * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
2263 (save_gdb_index_command): Switch to .gdb_index version 4.
2265 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2267 * mi/mi-main.c (get_register): Use get_frame_register_value rather
2268 than frame_register, and always pass a valid value to val_print.
2270 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2272 Centralize printing "<optimized out>".
2274 * valprint.h (val_print_optimized_out): Declare.
2275 * cp-valprint.c (cp_print_value_fields): Use
2276 val_print_optimized_out.
2277 * jv-valprint.c (java_print_value_fields): Ditto.
2278 * p-valprint.c (pascal_object_print_value_fields): Ditto.
2279 * printcmd.c (print_formatted): Ditto.
2280 * valprint.c (valprint_check_validity): Ditto.
2281 (value_check_printable): Ditto.
2282 (val_print_optimized_out): New.
2284 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2286 * infcmd.c (default_print_registers_info): Allocate values so to
2287 never pass a NULL value to val_print.
2289 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2291 * cp-valprint.c (cp_print_value): Treat the 'skip' local as
2292 boolean. Make sure to always pass a value that matches the
2293 contents buffer to callees. Preserve `address' for following
2295 * value.c (value_contents_for_printing_const): New.
2296 (value_address): Constify value argument.
2297 * value.h (value_contents_for_printing_const): Declare.
2298 (value_address): Constify value argument.
2300 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2302 * regcache.c (struct regcache_descr): Rename
2303 sizeof_raw_register_valid_p field to sizeof_raw_register_status,
2304 and sizeof_cooked_register_valid_p to
2305 sizeof_cooked_register_status.
2306 (init_regcache_descr): Adjust.
2307 (struct regcache): Rename register_valid_p field to
2309 (regcache_xmalloc_1, regcache_xfree, regcache_save)
2310 (do_cooked_read): Adjust.
2311 (regcache_valid_p): Rename to ...
2312 (regcache_register_status): ... this. Adjust.
2313 (regcache_invalidate): Adjust.
2314 (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
2316 (regcache_raw_supply): Adjust. If buf i NULL, mark the register
2317 as unavailable, not valid.
2318 (regcache_dump): Adjust.
2319 * regcache.h (enum register_status): New.
2320 (regcache_register_status): Declare.
2321 (regcache_invalidate): Delete declaration.
2322 * corelow.c (get_core_registers): Adjust.
2323 * tracepoint.c (tfile_fetch_registers): Adjust.
2324 * trad-frame.c (REG_VALUE): Rename to ...
2325 (TF_REG_VALUE): ... this.
2326 (REG_UNKNOWN): Rename to ...
2327 (TF_REG_UNKNOWN): ... this.
2328 (trad_frame_set_value, trad_frame_set_unknown): Adjust.
2329 * mi/mi-main.c (register_changed_p): Adjust.
2331 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2333 * regcache.c (struct regcache_descr): Remove outdated comment.
2334 (init_regcache_descr): Remove sizeof_raw_register_valid_p
2336 (regcache_xmalloc): Rename to ...
2337 (regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
2338 Allocate the regcache type accordingly.
2339 (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
2340 (regcache_xfree): Asser the source is also readonly. Copy sizeof
2341 cooked registers, not raw.
2342 (regcache_dup_no_passthrough): Delete.
2343 (get_thread_arch_regcache): Use regcache_xmalloc_1.
2344 * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
2345 mention obsolete write_register_bytes.
2346 * regcache.h (regcache_dup_no_passthrough): Delete declaration.
2348 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2350 Stop remote_read_bytes from handling partial reads itself.
2352 * remote-fileio.c: Include target.h.
2353 (remote_fileio_write_bytes): Delete.
2354 (remote_fileio_func_open, remote_fileio_func_write)
2355 (remote_fileio_func_rename, remote_fileio_func_unlink): Use
2357 (remote_fileio_func_stat): Use target_read_memory and
2358 target_write_memory.
2359 (remote_fileio_func_gettimeofday): Use target_write_memory.
2360 (remote_fileio_func_system): Use target_read_memory.
2361 * remote.c (remote_write_bytes): Make it static.
2362 (remote_read_bytes): Don't handle partial reads here.
2363 * remote.h (remote_read_bytes): Delete declaration.
2365 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2367 Simplify XML parsing a bit.
2369 * xml-support.h (gdb_xml_parse_quick): Declare.
2370 * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
2371 from gdb_xml_create_parser_and_cleanup, and added `old_chain'
2373 (gdb_xml_create_parser_and_cleanup): Reimplement on top of
2374 gdb_xml_create_parser_and_cleanup_1.
2375 (gdb_xml_parse_quick): New.
2376 * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
2377 * osdata.c (osdata_parse): Ditto.
2378 * remote.c (remote_threads_info): Ditto.
2379 * solib-target.c (solib_target_parse_libraries): Ditto.
2380 * xml-syscall.c (syscall_parse_xml): Ditto.
2381 * xml-tdesc.c (tdesc_parse_xml): Ditto.
2383 2011-01-24 Kevin Buettner <kevinb@redhat.com>
2385 * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
2386 with remote-mips.o added to gdb_target_obs.
2387 * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
2389 2011-01-24 Pedro Alves <pedro@codesourcery.com>
2391 * ada-valprint.c (val_print_packed_array_elements): Pass the
2392 correct struct value to val_print.
2393 (ada_val_print_1): Ditto.
2395 2011-01-24 Pedro Alves <pedro@codesourcery.com>
2397 Don't lose embedded_offset in printing routines throughout.
2399 * valprint.h (val_print_array_elements): Change prototype.
2400 * valprint.c (val_print_array_elements): Add `embedded_offset'
2401 parameter, and adjust to pass it down to val_print, while passing
2402 `valaddr' or `address' unmodified. Take embedded_offset into
2403 account when checking repetitions.
2404 * c-valprint.c (c_val_print): Pass embedded_offset to
2405 val_print_array_elements instead of adjusting `valaddr' and
2407 * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
2408 embedded_offset to val_print_array_elements instead of adjusting
2410 * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
2411 * p-valprint.c (pascal_val_print): Pass embedded_offset to
2412 val_print_array_elements and pascal_object_print_value_fields
2413 instead of adjusting `valaddr'.
2414 (pascal_object_print_value_fields): Add `offset' parameter, and
2416 (pascal_object_print_value): Add `offset' parameter, and adjust to
2418 (pascal_object_print_static_field): Use
2419 value_contents_for_printing/value_embedded_offset, rather than
2421 * ada-valprint.c (val_print_packed_array_elements): Add `offset'
2422 parameter, and adjust to use it. Use
2423 value_contents_for_printing/value_embedded_offset, rather than
2425 (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
2426 (ada_val_print_array): Add `offset' parameter, and adjust to use
2428 (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
2429 `embedded_offset' to `offset'. Don't re-adjust `valaddr'.
2430 Instead work with offsets. Use
2431 value_contents_for_printing/value_embedded_offset, rather than
2432 value_contents. Change `defer_val_int' local type to CORE_ADDR,
2433 and use value_from_pointer to extract a target pointer, rather
2434 than value_from_longest.
2435 (print_variant_part): Add `offset' parameter. Replace
2436 `outer_valaddr' parameter by a new `outer_offset' parameter.
2437 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2438 (ada_value_print): Use
2439 value_contents_for_printing/value_embedded_offset, rather than
2441 (print_record): Add `offset' parameter, and adjust to pass it
2443 (print_field_values): Add `offset' parameter. Replace
2444 `outer_valaddr' parameter by a new `outer_offset' parameter.
2445 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2446 Use value_contents_for_printing/value_embedded_offset, rather than
2448 * d-valprint.c (dynamic_array_type): Use
2449 value_contents_for_printing/value_embedded_offset, rather than
2451 * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
2452 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2453 (java_print_value_fields): Take `offset' into account. Don't
2454 re-adjust `valaddr'. Instead pass down adjusted offsets.
2455 (java_val_print): Take `embedded_offset' into account. Pass it to
2456 java_print_value_fields.
2457 * f-valprint.c (f77_print_array_1): Add `embedded_offset'
2458 parameter. Don't re-adjust `valaddr' or `address'. Instead pass
2459 down adjusted offsets.
2460 (f77_print_array): Add `embedded_offset' parameter. Pass it down.
2461 (f_val_print): Take `embedded_offset' into account.
2463 2011-01-21 Joel Brobecker <brobecker@adacore.com>
2465 * inflow.c: Include "gdbcmd.h".
2466 (interactive_mode): New static global, moved here from top.c.
2467 (show_interactive_mode): New function, moved here from top.c.
2468 use gdb_has_a_terminal instead of input_from_terminal_p to
2469 determine the current mode.
2470 (gdb_has_a_terminal): Add handling of the "iteractive-mode"
2472 (_initialize_inflow): Add the "set/show interactive-mode"
2473 commands. Moved here from top.c, after having adjusted slightly
2475 * top.c (interactive_mode, show_interactive_mode): Delete, moved
2477 (input_from_terminal_p): Remove handling of "interactive-mode"
2478 setting, moved to infow.c.
2479 (init_main): Remove creation of the "set/show interactive-mode"
2480 commands, moved to inflow.c.
2482 2011-01-19 Joel Brobecker <brobecker@adacore.com>
2484 * NEWS: Add entry for native ia64-hpux support.
2486 2011-01-19 Tom Tromey <tromey@redhat.com>
2489 * thread.c (free_thread): Free 'name'.
2490 (print_thread_info): Emit thread name. Change CLI output.
2491 (thread_name_command): New function.
2492 (do_captured_thread_select): Emit newline.
2493 (_initialize_thread): Register 'thread name' command.
2494 * target.h (struct target_ops) <to_thread_name>: New field.
2495 (target_thread_name): New macro.
2496 * target.c (update_current_target): Handle to_thread_name.
2497 * python/py-infthread.c (thpy_get_name): New function.
2498 (thpy_set_name): Likewise.
2499 (thread_object_getset): Add "name".
2500 * linux-nat.c (linux_nat_thread_name): New function.
2501 (linux_nat_add_target): Set to_thread_name.
2502 * gdbthread.h (struct thread_info) <name>: New field.
2504 2011-01-18 Joel Brobecker <brobecker@adacore.com>
2506 * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
2507 (ada_val_print_1): Likewise.
2509 2011-01-18 Joel Brobecker <brobecker@adacore.com>
2511 * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
2512 upper limit address is not greater than the function end address
2513 when the upper limit could not be computed using the debugging
2516 2011-01-17 Tom Tromey <tromey@redhat.com>
2518 * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use
2520 * utils.c: Include gdb_regex.h.
2521 (do_regfree_cleanup): New function.
2522 (make_regfree_cleanup): Likewise.
2523 (get_regcomp_error): Likewise.
2524 * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
2526 2011-01-17 Tom Tromey <tromey@redhat.com>
2528 * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call
2531 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
2533 * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
2534 for internal variables.
2535 (last_was_structop): New static variable.
2536 (COMPLETE): New token.
2537 (field_exp): New rule to group all '.' suffix handling.
2538 Add mark_struct_expression calls when approriate to be able
2539 to correctly find fields for completion.
2540 (yylex): Adapt to handle field completion and set INTVAR when
2543 2011-01-14 Yao Qi <yao@codesourcery.com>
2545 * arm-tdep.c (arm_register_reggroup_p): FPS register is in
2546 save_reggroup, restore_reggroup and all_reggroup.
2548 2011-01-14 Joel Brobecker <brobecker@adacore.com>
2550 * ada-valprint. (ada_printchar): Use the correct type length
2551 in call to ada_emit_char.
2552 * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
2554 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
2556 * solib-som.h (hpux_major_release): Declare variable here.
2557 * solib-som.c: Remove <sys/utsname.h> header.
2558 (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
2559 (hpux_major_release): Make global, change default value to
2560 DEFAULT_HPUX_MAJOR_RELEASE.
2561 (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
2562 * hppa-hpux-nat.c: Add <sys/utsname.h> include.
2563 Add "solib-som.h" header.
2564 (set_hpux_major_release): New function.
2565 (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
2567 2011-01-14 Mike Frysinger <vapier@gentoo.org>
2569 * configure.tgt (*-*-uclinux*): Match more Linux os targets
2571 2011-01-14 Joel Brobecker <brobecker@adacore.com>
2573 * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
2574 new-line at end of warning message.
2575 (ia64_hpux_store_register): Remove trailing new-line at end of
2577 * ia64-hpux-tdep.c: Rephrase comment.
2578 * solib-ia64-hpux.c (struct dld_info): Change type of field
2579 dld_flags from "long long" to ULONGEST.
2581 2011-01-14 Pedro Alves <pedro@codesourcery.com>
2583 * target.h (deprecated_child_ops): Delete declaration.
2584 * target.c (deprecated_child_ops): Delete definition.
2586 2011-01-14 Pedro Alves <pedro@codesourcery.com>
2588 * Makefile.in (hpux-thread.o): Delete rule.
2589 * configure.ac: Don't check for HPUX DCE threads support.
2590 * configure, config.in: Regenerate.
2591 * hppa-hpux-nat.c (child_suppress_run): Delete.
2592 (hppa_hpux_child_can_run): Delete.
2593 (_initialize_hppa_hpux_nat): Don't override to_can_run.
2594 * hpux-thread.c: Delete.
2596 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2598 * hpux-thread.c (hpux_pid_to_str): Delete.
2600 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2602 * ada-valprint.c (ada_emit_char): Remove strange code.
2603 Check that c is <= UCHAR_MAX before passing it to isascii.
2604 (char_at): Do not assume that TYPE_LEN is either 1 or 2.
2606 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2608 * top.c (input_from_terminal_p): Restrict the use of interactive_mode
2609 to the case where instream is stdin.
2611 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2613 * ia64-tdep.h (struct regcache): Forward declare.
2614 (struct ia64_infcall_ops): New struct type.
2615 (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
2617 * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
2618 Renames ia64_find_global_pointer.
2619 (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
2620 (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
2621 (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
2623 (ia64_infcall_ops): New static global constant.
2624 (ia64_gdbarch_init): Set tdep->infcall_ops.
2625 * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
2626 (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
2627 * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
2628 (ia64_hpux_dummy_code): New static global constant.
2629 (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
2630 (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
2631 (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
2633 (ia64_hpux_infcall_ops): New static global constant.
2634 (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
2635 for inferior function calls to work properly on ia64-hpux.
2637 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2639 * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
2640 * ia64-tdep.h (struct frame_info): forward declaration.
2641 (struct gdbarch_tdep): Add field size_of_register_frame.
2642 * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
2643 to determine the size of the register frame.
2644 (ia64_size_of_register_frame): New function.
2645 (ia64_gdbarch_init): Set tdep->size_of_register_frame.
2646 * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
2647 (IA64_HPUX_UREG_REASON): New macro.
2648 (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
2650 (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
2651 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
2652 (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
2655 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2657 Add support for ia64-hpux.
2658 * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
2659 ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
2661 * configure.host: Add handling for ia64-hpux hosts. Add associated
2663 * configure.tgt: Add handling for ia64-hpux targets.
2664 * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
2665 (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
2666 (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
2668 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2670 [ttrace] Compute thread list immediately after attach.
2671 * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
2673 (inf_ttrace_attach): Use it.
2675 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2677 * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
2678 if we could not determine the frame's function address. Instead,
2679 use the frame's PC, and then continue.
2681 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2683 * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
2684 not already defined.
2686 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2688 * ia64-tdep.c (ia64_struct_type_p): New function.
2689 (ia64_extract_return_value): Handle integral values that are
2690 less than 8 bytes long.
2691 (ia64_push_dummy_call): Likewise.
2693 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2695 * ia64-tdep.c (floatformat_ia64_ext_little): Renames
2696 floatformat_ia64_ext.
2697 (floatformat_ia64_ext_big): New static const.
2698 (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
2700 2011-01-12 Tom Tromey <tromey@redhat.com>
2702 * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
2704 * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
2705 (mi_cmd_thread_list_ids): Likewise.
2706 (mi_cmd_data_list_changed_registers): Likewise.
2707 (mi_cmd_data_list_register_values): Likewise.
2708 (mi_cmd_data_write_register_values): Likewise.
2709 (mi_cmd_data_evaluate_expression): Likewise.
2710 (mi_cmd_data_read_memory): Likewise.
2711 (mi_cmd_data_read_memory_bytes): Likewise.
2712 (mi_cmd_data_write_memory): Likewise.
2713 (mi_cmd_enable_timings): Likewise.
2714 * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
2715 * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
2716 (mi_cmd_var_delete): Likewise.
2717 (mi_cmd_var_set_format): Likewise.
2718 (mi_cmd_var_show_format): Likewise.
2719 (mi_cmd_var_info_num_children): Likewise.
2720 (mi_cmd_var_list_children): Likewise.
2721 (mi_cmd_var_info_type): Likewise.
2722 (mi_cmd_var_info_expression): Likewise.
2723 (mi_cmd_var_show_attributes): Likewise.
2724 (mi_cmd_var_assign): Likewise.
2725 (mi_cmd_var_update): Likewise.
2726 (mi_cmd_enable_pretty_printing): Likewise.
2727 (mi_cmd_var_set_update_range): Likewise.
2728 * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
2730 (mi_cmd_target_file_put): Likewise.
2731 (mi_cmd_target_file_delete): Likewise.
2732 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
2734 (mi_cmd_stack_info_depth): Likewise.
2735 (mi_cmd_stack_list_locals): Likewise.
2736 (mi_cmd_stack_list_args): Likewise.
2737 (mi_cmd_stack_select_frame): Likewise.
2738 (mi_cmd_stack_select_frame): Likewise.
2739 (mi_cmd_stack_info_frame): Likewise.
2740 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
2742 (mi_cmd_file_list_exec_source_files): Likewise.
2743 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
2744 (mi_cmd_env_cd): Likewise.
2745 (mi_cmd_env_path): Likewise.
2746 (mi_cmd_env_dir): Likewise.
2747 (mi_cmd_inferior_tty_show): Likewise.
2748 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
2749 * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
2750 (mi_cmd_break_watch): Likewise.
2752 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
2754 * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
2755 (ppc_linux_insert_hw_breakpoint): Likewise.
2756 (ppc_linux_remove_hw_breakpoint): Likewise.
2757 (ppc_linux_insert_watchpoint): Likewise.
2759 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
2760 Jan Kratochvil <jan.kratochvil@redhat.com>
2762 PR fortran/11104 and DWARF unbound arrays detection.
2763 * dwarf2read.c (read_subrange_type): Set zero length on unspecified
2764 upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
2765 unspecified upper bound.
2766 * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
2767 variables array_size_array, tmp_type and offset_item. New variable
2768 array. Remove call to f77_get_upperbound. New variables array_type
2769 and index. Call value_subscripted_rvalue for each dimenasion. Remove
2770 the final call to deprecated_set_value_type.
2772 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2774 Make value allocations more lazy.
2775 * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
2776 instead of allocate_value and set_value_lazy when possible.
2777 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
2778 instead of allocate_value and set_value_lazy.
2779 * findvar.c (value_of_register_lazy): Likewise.
2780 (read_var_value): Remove V preallocation, call just check_typedef in
2781 advance. Move allocate_value to LOC_CONST, LOC_LABEL,
2782 LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
2783 LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
2784 set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
2785 remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
2786 in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
2787 the end, remove set_value_lazy there.
2788 * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
2789 instead of allocate_value and set_value_lazy when possible.
2790 * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
2791 * value.c (allocate_computed_value): Use allocate_value_lazy instead
2792 of allocate_value and set_value_lazy.
2793 (value_from_contents_and_address): Use allocate_value_lazy instead of
2794 allocate_value and set_value_lazy when possible.
2796 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
2798 * disasm.c (dump_insns): Support dumping opcodes for MI.
2799 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
2800 dumping of instruction opcodes.
2802 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch)
2804 * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
2807 2011-01-11 Tom Tromey <tromey@redhat.com>
2809 * thread.c (do_captured_thread_select): Emit newline before
2812 2011-01-11 Michael Snyder <msnyder@vmware.com>
2814 * s390-tdep.c: Comment cleanup, mostly periods and spaces.
2815 * score-tdep.c: Ditto.
2816 * score-tdep.h: Ditto.
2817 * ser-base.c: Ditto.
2818 * ser-go32.c: Ditto.
2821 * ser-mingw.c: Ditto.
2822 * ser-pipe.c: Ditto.
2824 * ser-unix.c: Ditto.
2825 * sh64-tdep.c: Ditto.
2826 * shnbsd-nat.c: Ditto.
2830 * solib-darwin.c: Ditto.
2831 * solib-frv.c: Ditto.
2833 * solib-irix.c: Ditto.
2834 * solib-osf.c: Ditto.
2835 * solib-pa64.c: Ditto.
2836 * solib-som.c: Ditto.
2837 * solib-spu.c: Ditto.
2838 * solib-sunos.c: Ditto.
2839 * solib-svr4.c: Ditto.
2841 * sol-thread.c: Ditto.
2845 * sparc64-linux-tdep.c: Ditto.
2846 * sparc64-tdep.c: Ditto.
2847 * sparc-linux-nat.c: Ditto.
2848 * sparc-linux-tdep.c: Ditto.
2849 * sparc-sol2-nat.c: Ditto.
2850 * sparc-sol2-tdep.c: Ditto.
2851 * sparc-tdep.c: Ditto.
2852 * sparc-tdep.h: Ditto.
2853 * spu-tdep.c: Ditto.
2854 * stabsread.c: Ditto.
2855 * stabsread.h: Ditto.
2863 * target-descriptions.c: Ditto.
2864 * target-descriptions.h: Ditto.
2866 * target-memory.c: Ditto.
2867 * terminal.h: Ditto.
2870 * tracepoint.c: Ditto.
2871 * tracepoint.h: Ditto.
2872 * trad-frame.h: Ditto.
2873 * typeprint.c: Ditto.
2875 2011-01-11 Michael Snyder <msnyder@vmware.com>
2877 * ui-file.c: Comment cleanup, mostly periods and spaces.
2882 * v850-tdep.c: Ditto.
2883 * valarith.c: Ditto.
2885 * valprint.c: Ditto.
2886 * valprint.h: Ditto.
2891 * vax-tdep.c: Ditto.
2895 * windows-nat.c: Ditto.
2896 * windows-tdep.c: Ditto.
2897 * xcoffread.c: Ditto.
2898 * xcoffsolib.c: Ditto.
2899 * xml-support.c: Ditto.
2900 * xstormy16-tdep.c: Ditto.
2901 * xtensa-tdep.c: Ditto.
2902 * xtensa-tdep.h: Ditto.
2904 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2906 * breakpoint.c (resources_needed_watchpoint): Fix indentation.
2907 * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
2909 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2910 Thiago Jung Bauermann <bauerman@br.ibm.com>
2912 Implement support for PowerPC BookE ranged watchpoints.
2914 (struct breakpoint_ops) <resources_needed>: New method.
2915 Initialize to NULL in all existing breakpoint_ops instances.
2916 (struct breakpoint) <exact>: New field.
2917 (target_exact_watchpoints): Declare external global.
2918 * breakpoint.c (target_exact_watchpoints): New global flag.
2919 (update_watchpoint): Set b->type to bp_hardware_watchpoint and
2920 b->enable_state to bp_enabled before calling
2921 hw_watchpoint_used_count.
2922 (hw_watchpoint_used_count): Iterate over all bp_locations in a
2923 watchpoint. Call breakpoint's breakpoint_ops.resources_needed
2925 (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
2926 if the watchpoint is exact.
2927 (resources_needed_watchpoint): New function.
2928 (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
2929 (watch_command_1): Set b->exact if the user asked for an exact
2930 watchpoint and one can be set.
2931 (can_use_hardware_watchpoint): Add exact_watchpoints argument.
2932 Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
2933 the user asks for an exact watchpoint and one can be set. Return
2934 number of needed debug registers to watch the expression.
2935 * gdbtypes.c (is_scalar_type): New function, based on
2936 valprint.c:scalar_type_p.
2937 (is_scalar_type_recursive): New function.
2938 * gdbtypes.h (is_scalar_type_recursive): Declare.
2939 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
2940 handle regions when ranged watchpoints are available.
2941 (create_watchpoint_request): New function.
2942 (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
2943 create_watchpoint_request.
2944 * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
2945 (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
2946 `set powerpc' and `show powerpc' commands.
2947 * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
2948 Mention documentation comment in the target macro.
2949 (target_region_ok_for_hw_watchpoint): Document return value.
2951 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2953 * breakpoint.c (update_watchpoint): Decide on using a software or
2954 hardware watchpoint after the bp_locations are created.
2956 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2958 Convert hardware watchpoints to use breakpoint_ops.
2959 * breakpoint.h (breakpoint_ops) <insert>: Rename to...
2960 <insert_location>: ... this. Return int instead of void.
2961 Accept pointer to struct bp_location instead of pointer to
2962 struct breakpoint. Adapt all implementations.
2963 (breakpoint_ops) <remove>: Rename to...
2964 <remove_location>: ... this. Accept pointer to struct bp_location
2965 instead of pointer to struct breakpoint. Adapt all implementations.
2966 * breakpoint.c (insert_catchpoint): Delete function.
2967 (insert_bp_location): Call the watchpoint or catchpoint's
2968 breakpoint_ops.insert method.
2969 (remove_breakpoint_1): Call the watchpoint or catchpoint's
2970 breakpoint_ops.remove method.
2971 (insert_watchpoint, remove_watchpoint): New functions.
2972 (watchpoint_breakpoint_ops): New structure.
2973 (watch_command_1): Initialize the OPS field.
2974 * inf-child.c (inf_child_insert_fork_catchpoint)
2975 (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
2976 (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
2977 (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
2979 (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
2980 to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
2981 to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
2982 to_remove_exec_catchpoint and to_set_syscall_catchpoint.
2983 * target.c (update_current_target): Change default implementation of
2984 to_insert_fork_catchpoint, to_remove_fork_catchpoint,
2985 to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
2986 to_insert_exec_catchpoint, to_remove_exec_catchpoint and
2987 to_set_syscall_catchpoint to return_one.
2988 (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
2989 (debug_to_insert_exec_catchpoint): Report return value.
2990 * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
2991 (to_insert_exec_catchpoint): Change declaration to return int instead
2994 2011-01-11 Michael Snyder <msnyder@vmware.com>
2996 * arm-tdep.c: Internationalization.
2999 * fork-child.c: Ditto.
3000 * nto-procfs.c: Ditto.
3001 * ppc-sysv-tdep.c: Ditto.
3003 * remote-mips.c: Ditto.
3005 * rs6000-nat.c: Ditto.
3006 * rs6000-tdep.c: Ditto.
3010 * xml-support.c: Ditto.
3011 * mi/mi-cmd-break.c: Ditto.
3012 * mi/mi-cmd-var.c: Ditto.
3013 * mi/mi-interp.c: Ditto.
3014 * mi/mi-main.c: Ditto.
3016 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
3018 * remote-sim.c (gdbsim_store_register): Update API to
3019 sim_store_register to check more error conditions.
3021 2011-01-10 Michael Snyder <msnyder@vmware.com>
3023 * nto-procfs.c: Comment cleanup, mostly periods and spaces.
3024 * nto-tdep.c: Ditto.
3025 * nto-tdep.h: Ditto.
3026 * objc-exp.y: Ditto.
3027 * objc-lang.c: Ditto.
3028 * objfiles.c: Ditto.
3029 * objfiles.h: Ditto.
3030 * observer.c: Ditto.
3031 * opencl-lang.c: Ditto.
3034 * parser-defs.h: Ditto.
3037 * posix-hdep.c: Ditto.
3038 * ppcbug-rom.c: Ditto.
3039 * ppc-linux-nat.c: Ditto.
3040 * ppc-linux-tdep.c: Ditto.
3041 * ppc-linux-tdep.h: Ditto.
3042 * ppcnbsd-tdep.c: Ditto.
3043 * ppcobsd-tdep.c: Ditto.
3044 * ppcobsd-tdep.h: Ditto.
3045 * ppc-sysv-tdep.c: Ditto.
3046 * ppc-tdep.h: Ditto.
3047 * printcmd.c: Ditto.
3048 * proc-abi.c: Ditto.
3049 * proc-flags.c: Ditto.
3051 * proc-utils.h: Ditto.
3052 * progspace.h: Ditto.
3053 * prologue-value.c: Ditto.
3054 * prologue-value.h: Ditto.
3055 * psympriv.h: Ditto.
3057 * p-typeprint.c: Ditto.
3058 * p-valprint.c: Ditto.
3059 * ravenscar-sparc-thread.c: Ditto.
3060 * ravenscar-thread.c: Ditto.
3061 * ravenscar-thread.h: Ditto.
3063 * regcache.c: Ditto.
3064 * regcache.h: Ditto.
3066 * remote-fileio.c: Ditto.
3067 * remote-fileio.h: Ditto.
3069 * remote-m32r-sdi.c: Ditto.
3070 * remote-mips.c: Ditto.
3071 * remote-sim.c: Ditto.
3072 * rs6000-aix-tdep.c: Ditto.
3073 * rs6000-nat.c: Ditto.
3074 * rs6000-tdep.c: Ditto.
3076 2011-01-10 Michael Snyder <msnyder@vmware.com>
3078 * charset.c (validate): Internationalization.
3079 * coffread.c (read_one_sym): Ditto.
3080 * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
3081 * h8300-tdep.c (H8300_extract_return_value): Ditto.
3082 * inflow.c (new_tty): Ditto.
3083 * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
3084 * m32c-tdep.c (m32c_return_value): Ditto.
3085 * mep-tdep.c (mep_store_return_value): Ditto.
3086 * score-tdep.c (score7_fetch_insn): Ditto.
3087 * ser-mingw.c (pipe_windows_open): Ditto.
3088 * sh64-tdep.c (sh64_extract_return_value): Ditto.
3089 * spu-tdep.c (spu_register_type): Ditto.
3090 * tracepoint.c (trace_find_command): Ditto.
3091 * valarith.c (value_pos): Ditto.
3093 2011-01-10 Joel Brobecker <brobecker@adacore.com>
3095 * ada-valprint.c (printstr): Minor comment reformatting.
3097 2011-01-08 Michael Snyder <msnyder@vmware.com>
3099 * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
3102 2011-01-08 Michael Snyder <msnyder@vmware.com>
3104 * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
3105 * hppa-hpux-tdep.c: Ditto.
3106 * hppa-linux-nat.c: Ditto.
3107 * hppa-linux-tdep.c: Ditto.
3108 * hppanbsd-tdep.c: Ditto.
3109 * hppa-tdep.c: Ditto.
3110 * hppa-tdep.h: Ditto.
3111 * hpux-thread.c: Ditto.
3112 * i386-cygwin-tdep.c: Ditto.
3113 * i386-darwin-nat.c: Ditto.
3114 * i386gnu-nat.c: Ditto.
3115 * i386-linux-nat.c: Ditto.
3116 * i386-linux-tdep.c: Ditto.
3117 * i386-nat.c: Ditto.
3118 * i386-nat.h: Ditto.
3119 * i386nbsd-tdep.c: Ditto.
3120 * i386-sol2-nat.c: Ditto.
3121 * i386-stub.c: Ditto.
3122 * i386-tdep.c: Ditto.
3123 * i386-tdep.h: Ditto.
3124 * i387-tdep.c: Ditto.
3125 * ia64-linux-nat.c: Ditto.
3126 * ia64-linux-tdep.c: Ditto.
3127 * ia64-tdep.c: Ditto.
3131 * inferior.c: Ditto.
3132 * inferior.h: Ditto.
3138 * iq2000-tdep.c: Ditto.
3139 * irix5-nat.c: Ditto.
3145 * jv-typeprint.c: Ditto.
3146 * jv-valprint.c: Ditto.
3147 * language.c: Ditto.
3148 * language.h: Ditto.
3149 * linespec.c: Ditto.
3150 * linux-fork.c: Ditto.
3151 * linux-nat.c: Ditto.
3152 * linux-thread-db.c: Ditto.
3153 * lm32-tdep.c: Ditto.
3155 2011-01-08 Michael Snyder <msnyder@vmware.com>
3157 * m2-exp.y: Comment cleanup, mostly periods and spaces.
3159 * m2-typeprint.c: Ditto.
3160 * m2-valprint.c: Ditto.
3161 * m32c-tdep.c: Ditto.
3162 * m32r-linux-nat.c: Ditto.
3163 * m32r-rom.c: Ditto.
3164 * m32r-tdep.c: Ditto.
3165 * m32r-tdep.h: Ditto.
3166 * m68hc11-tdep.c: Ditto.
3167 * m58klinux-nat.c: Ditto.
3168 * m68k-tdep.c: Ditto.
3169 * m88k-tdep.c: Ditto.
3170 * m88k-tdep.h: Ditto.
3171 * machoread.c: Ditto.
3172 * macrocmd.c: Ditto.
3173 * macroexp.c: Ditto.
3174 * macrotab.c: Ditto.
3177 * mdebugread.c: Ditto.
3178 * mdebugread.h: Ditto.
3181 * memory-map.h: Ditto.
3182 * mep-tdep.c: Ditto.
3183 * microblaze-rom.c: Ditto.
3184 * microblaze-tdep.c: Ditto.
3186 * mips-irix-tdep.c: Ditto.
3187 * mips-linux-nat.c: Ditto.
3188 * mips-linux-tdep.c: Ditto.
3189 * mips-linux-tdep.h: Ditto.
3190 * mipsnbsd-nat.c: Ditto.
3191 * mipsnbsd-tdep.c: Ditto.
3192 * mipsread.c: Ditto.
3193 * mips-tdep.c: Ditto.
3194 * mips-tdep.h: Ditto.
3195 * mn10300-linux-tdep.c: Ditto.
3196 * mn10300-tdep.c: Ditto.
3197 * mn10300-tdep.h: Ditto.
3200 * moxie-tdep.c: Ditto.
3201 * moxie-tdep.h: Ditto.
3204 2011-01-08 Mike Frysinger <vapier@gentoo.org>
3206 * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
3208 2011-01-08 Robert Millan <rmh@gnu.org>
3210 * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
3212 2011-01-07 Michael Snyder <msnyder@vmware.com>
3214 * charset.c (_initialize_charset): Fix typo in string.
3216 2011-01-07 Michael Snyder <msnyder@vmware.com>
3218 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
3220 * tui/tui-layout.c (tui_set_layout_for_display_command):
3221 Split line so that operator goes to beginning of line.
3222 * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
3223 assignment out of if statement.
3225 2011-01-07 Michael Snyder <msnyder@vmware.com>
3227 * ada-lang.c: Comment cleanup, mostly periods and spaces.
3228 * ada-lang.h: Ditto.
3229 * ada-tasks.c: Ditto.
3230 * ada-valprint.c: Ditto.
3231 * aix-threads.c: Ditto.
3232 * alpha-linux-nat.c: Ditto.
3233 * alpha-linux-tdep.c: Ditto.
3234 * alpha-mdebug-tdep.c: Ditto.
3235 * alpha-nat.c: Ditto.
3236 * alpha-osf1-tdep.c: Ditto.
3237 * alpha-tdep.c: Ditto.
3238 * alphabsd-nat.c: Ditto.
3239 * alphabsd-tdep.c: Ditto.
3240 * amd64-darwin-tdep.c: Ditto.
3241 * amd64-linux-nat.c: Ditto.
3242 * amd64-linux-tdep.c: Ditto.
3243 * amd64-sol2-tdep.c: Ditto.
3244 * amd64-tdep.c: Ditto.
3245 * amd64-fbsd-tdep.c: Ditto.
3246 * amd64-nbsd-tdep.c: Ditto.
3247 * amd64-obsd-tdep.c: Ditto.
3248 * amd64-linux-nat.c: Ditto.
3249 * amd64-linux-tdep.c: Ditto.
3250 * arm-tdep.c: Ditto.
3251 * arm-tdep.h: Ditto.
3252 * armnbsd-nat.c: Ditto.
3253 * avr-tdep.c: Ditto.
3254 * bfin-tdep.c: Ditto.
3256 * c-typeprintc: Ditto.
3257 * c-valprint.c: Ditto.
3258 * coff-pe-read.h: Ditto.
3259 * coffreead.c: Ditto.
3260 * cris-tdep.c: Ditto.
3262 * darwin-nat-info.c: Ditto.
3263 * darwin-nat.c: Ditto.
3264 * dbug-rom.c: Ditto.
3268 * dec-thread.c: Ditto.
3270 * demangle.c: Ditto.
3271 * dicos-tdep.c: Ditto.
3272 * dictionary.c: Ditto.
3273 * dictionary.h: Ditto.
3274 * dink32-rom.c: Ditto.
3276 * doublest.c: Ditto.
3278 * dummy-frame.c: Ditto.
3279 * dwarf2-frame.c: Ditto.
3280 * dwarf2expr.c: Ditto.
3281 * dwarf2loc.c: Ditto.
3282 * dwarf2read.c: Ditto.
3286 * event-top.h: Ditto.
3287 * exceptions.c: Ditto.
3288 * exceptions.h: Ditto.
3290 * expprint.c: Ditto.
3291 * expression.h: Ditto.
3295 * f-typeprint.c: Ditto.
3296 * f-valprint.c: Ditto.
3297 * fbsd-nat.c: Ditto.
3299 * fork-child.c: Ditto.
3302 * frv-linux-tdep.c: Ditto.
3303 * frv-tdep.c: Ditto.
3305 * gdb-stabs.h: Ditto.
3306 * gdb_assert.h: Ditto.
3307 * gdb_string.h: Ditto.
3308 * gdb_thread_db.h: Ditto.
3309 * gdb_wait.h: Ditto.
3310 * gdbarch.sh: Ditto.
3312 * gdbthread.h: Ditto.
3313 * gdbtypes.c: Ditto.
3314 * gdbtypes.h: Ditto.
3317 * gnu-v2-abi.c: Ditto.
3318 * gnu-v3-abi.c: Ditto.
3319 * go32-nat.c: Ditto.
3320 * gdbarch.c: Regenerate.
3321 * gdbarch.h: Regenerate.
3323 2011-01-07 Michael Snyder <msnyder@vmware.com>
3325 * ax-gdb.c: Adjust some long output strings.
3326 * breakpoint.c: Ditto.
3331 * linux-nat.c: Ditto.
3332 * solib-pa64.c: Ditto.
3333 * solib-som.c: Ditto.
3335 2011-01-06 Tom Tromey <tromey@redhat.com>
3339 * python/python.c (GdbMethods): Add "newest_frame" method.
3340 * python/python-internal.h (gdbpy_newest_frame): Declare.
3341 * python/py-frame.c (gdbpy_newest_frame): New function.
3343 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com>
3345 * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
3346 * jit.c (jit_debug): New variable.
3347 (show_jit_debug): New function.
3348 (struct target_buffer): Use ULONGEST.
3349 (bfd_open_from_target_memory): Likewise.
3350 (jit_register_code, jit_inferior_init): Add debug output.
3351 (_initialize_jit): Register "debug jit" command.
3353 2011-01-06 Tom Tromey <tromey@redhat.com>
3355 * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
3356 * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
3359 2011-01-06 Tom Tromey <tromey@redhat.com>
3361 * python/py-frame.c (frapy_block): Use get_frame_block.
3363 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3365 Do not stop on SIGPRIO signals by default
3366 * infrun.c (_initialize_infrun): Unset signal_stop and
3367 signal_print for TARGET_SIGNAL_PRIO.
3369 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3371 * ada-tasks.c: Fix style violation in comment.
3373 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3375 * linespec.c (decode_compound, find_method): Remove trailing \n
3376 at end of error string.
3377 * solib-irix.c (irix_current_sos): Likewise.
3378 * varobj.c (uninstall_variable): Likewise.
3380 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3382 * copyright.py: New script.
3383 * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
3384 Launch emacs without exec'ing. Call copyright.py afterwards.
3386 2011-01-05 Michael Snyder <msnyder@vmware.com>
3388 * addrmap.c: Shorten lines of >= 80 columns.
3389 * arch-utils.c: Ditto.
3390 * arch-utils.h: Ditto.
3392 * ax-general.c: Ditto.
3394 * blockframe.c: Ditto.
3395 * breakpoint.c: Ditto.
3396 * buildsym.c: Ditto.
3398 * c-typeprint.c: Ditto.
3400 * coffread.c: Ditto.
3404 * cp-namespace.c: Ditto.
3405 * cp-support.c: Ditto.
3406 * dbug-rom.c: Ditto.
3411 * dictionary.c: Ditto.
3413 * doublest.c: Ditto.
3414 * dwarf2-frame.c: Ditto.
3415 * dwarf2expr.c: Ditto.
3416 * dwarf2loc.c: Ditto.
3417 * dwarf2read.c: Ditto.
3420 * event-loop.c: Ditto.
3421 * event-loop.h: Ditto.
3422 * exceptions.h: Ditto.
3424 * expprint.c: Ditto.
3425 * expression.h: Ditto.
3427 * f-valprint.c: Ditto.
3429 * frame-base.c: Ditto.
3430 * frame-unwind.c: Ditto.
3431 * frame-unwind.h: Ditto.
3435 * gdb-stabs.h: Ditto.
3436 * gdb_assert.h: Ditto.
3437 * gdb_dirent.h: Ditto.
3438 * gdb_obstack.h: Ditto.
3440 * gdbtypes.c: Ditto.
3441 * gdbtypes.h: Ditto.
3442 * inf-ttrace.c: Ditto.
3447 * inline-frame.h: Ditto.
3448 * language.c: Ditto.
3449 * language.h: Ditto.
3450 * libunwind-frame.c: Ditto.
3451 * libunwind-frame.h: Ditto.
3452 * linespec.c: Ditto.
3453 * linux-nat.c: Ditto.
3454 * linux-nat.h: Ditto.
3455 * linux-thread-db.c: Ditto.
3456 * machoread.c: Ditto.
3457 * macroexp.c: Ditto.
3458 * macrotab.c: Ditto.
3461 * mdebugread.c: Ditto.
3466 * objfiles.c: Ditto.
3467 * objfiles.h: Ditto.
3469 * p-typeprint.c: Ditto.
3470 * p-valprint.c: Ditto.
3472 * printcmd.c: Ditto.
3473 * proc-events.c: Ditto.
3475 * progspace.c: Ditto.
3476 * progspace.h: Ditto.
3477 * psympriv.h: Ditto.
3480 * regcache.c: Ditto.
3481 * regcache.h: Ditto.
3482 * remote-fileio.c: Ditto.
3484 * ser-mingw.c: Ditto.
3486 * ser-unix.c: Ditto.
3489 * solib-frv.c: Ditto.
3490 * solib-irix.c: Ditto.
3491 * solib-osf.c: Ditto.
3492 * solib-pa64.c: Ditto.
3493 * solib-som.c: Ditto.
3494 * solib-sunos.c: Ditto.
3495 * solib-svr4.c: Ditto.
3496 * solib-target.c: Ditto.
3500 * stabsread.c: Ditto.
3501 * stabsread.c: Ditto.
3504 * symfile-mem.c: Ditto.
3510 * target-descriptions.c: Ditto.
3511 * target-memory.c: Ditto.
3514 * terminal.h: Ditto.
3517 * tracepoint.c: Ditto.
3518 * tracepoint.h: Ditto.
3522 * user-regs.c: Ditto.
3523 * user-regs.h: Ditto.
3525 * valarith.c: Ditto.
3527 * valprint.c: Ditto.
3528 * valprint.h: Ditto.
3533 * xcoffread.c: Ditto.
3534 * xcoffsolib.c: Ditto.
3535 * xcoffsolib.h: Ditto.
3536 * xml-syscall.c: Ditto.
3537 * xml-tdesc.c: Ditto.
3539 2011-01-05 Michael Snyder <msnyder@vmware.com>
3541 * cli/cli-cmds.c: Shorten lines of >= 80 columns.
3542 * cli/cli-decode.c: Ditto.
3543 * cli/cli-dump.c: Ditto.
3544 * cli/cli-logging.c: Ditto.
3545 * cli/cli-script.c: Ditto.
3546 * cli/cli-setshow.c: Ditto.
3547 * common/signals.c: Ditto.
3548 * mi/mi-cmd-break.c: Ditto.
3549 * mi/mi-cmd-disas.c: Ditto.
3550 * mi/mi-cmd-stack.c: Ditto.
3551 * mi/mi-cmd-var.c: Ditto.
3552 * mi/mi-cmds.c: Ditto.
3553 * mi/mi-common.h: Ditto.
3554 * mi/mi-console.c: Ditto.
3555 * mi/mi-interp.c: Ditto.
3556 * mi/mi-main.c: Ditto.
3557 * osf-share/cma_attr.c: Ditto.
3558 * osf-share/cma_deb_core.h: Ditto.
3559 * osf-share/cma_debug_client.h: Ditto.
3560 * osf-share/cma_handle.h: Ditto.
3561 * osf-share/cma_mutex.h: Ditto.
3562 * osf-share/cma_stack_int.h: Ditto.
3563 * osf-share/cma_tcb_defs.h: Ditto.
3564 * python/py-auto-load.c: Ditto.
3565 * python/py-breakpoint.c: Ditto.
3566 * python/py-cmd.c: Ditto.
3567 * python/py-frame.c: Ditto.
3568 * python/py-objfile.c: Ditto.
3569 * python/py-param.c: Ditto.
3570 * python/py-progspace.c: Ditto.
3571 * python/py-symbol.c: Ditto.
3572 * python/py-value.c: Ditto.
3573 * python/python-internal.h: Ditto.
3574 * python/python.c: Ditto.
3575 * tui/tui-data.c: Ditto.
3576 * tui/tui-disasm.c: Ditto.
3577 * tui/tui-hooks.c: Ditto.
3578 * tui/tui-io.c: Ditto.
3579 * tui/tui-layout.c: Ditto.
3580 * tui/tui-regs.c: Ditto.
3581 * tui/tui-source.c: Ditto.
3582 * tui/tui-stack.c: Ditto.
3583 * tui/tui-win.c: Ditto.
3584 * tui/tui-windata.c: Ditto.
3585 * tui/tui-winsource.c: Ditto.
3587 2011-01-05 Joel Brobecker <brobecker@adacore.com>
3589 * configure.ac, gdb.1: Copyright year update.
3591 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3593 * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
3594 this_pc_in_block, morestack_msym and morestack_name. Check for
3595 "__morestack" minimal symbol there.
3597 2011-01-03 Joel Brobecker <brobecker@adacore.com>
3599 * symfile.c (find_sym_fns): Add call to dont_repeat.
3601 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3603 Copyright year update in most files (performed by copyright.sh).
3605 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3607 * top.c (print_gdb_version): Update copyright year in version output.
3609 For older changes see ChangeLog-2010.
3615 version-control: never