1 2009-05-11 Pedro Alves <pedro@codesourcery.com>
3 * linux-nat.c (enum sigchld_state): Delete.
4 (linux_nat_async_events_state): Delete.
5 (struct waitpid_result): Delete.
6 (waitpid_queue): Delete.
7 (queued_waitpid_1): Delete.
8 (async_file_flush): New.
9 (queued_waitpid, push_waitpid): Delete.
10 (async_file_mark): New.
11 (drain_queued_events): Delete.
12 (my_waitpid): Remove locally queued events handling.
13 (linux_test_for_tracefork): Upjust.
14 (linux_child_follow_fork): Ditto.
15 (sync_sigchld_action): Delete.
16 (blocked_mask): Reinstate.
17 (async_sigchld_action): Rename to...
18 (sigchld_action): ... this.
19 (block_child_signals): New.
20 (restore_child_signals_mask): New.
21 (lin_lwp_attach_lwp): Adjust.
22 (linux_nat_create_inferior): Ditto.
23 (linux_nat_attach): Also use lp->status in async mode.
24 (get_pending_status): Don't use queued_waitpid.
25 (linux_nat_detach): Don't drain locally queued events.
26 (linux_nat_resume): Allow pending wait statuses stored lp->status
27 in async mode. If returning early due to a pending event,
28 re-register the event source.
29 (stop_wait_callback): Allow pending wait statuses stored
30 lp->status in async mode.
31 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
32 (linux_nat_wait): Rename to ...
33 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
34 lp->status in async mode. Always add WNOHANG to the waitpid
35 options in async mode.
36 (linux_nat_wait): New.
37 (kill_callback): Don't drain locally queued events.
38 (sigchld_handler): Rewrite.
39 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
40 refer to "set target-async".
41 (linux_nat_async_mask): If in non-stop, and re-enabling async
42 mode, re-register the target event source in the event loop.
43 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
44 (get_pending_events, async_sigchld_handler)
45 (linux_nat_async_events): Delete.
46 (handle_target_event): New.
47 (linux_nat_async_file_handler): Delete.
48 (linux_async_pipe): New.
49 (linux_nat_async): Only re-register in the event loop if not
50 registered yet. Always notify the event-loop once if enabling the
52 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
53 lp->status, not in the locally queued event list.
54 (linux_nat_stop): Don't mask out async event handling.
55 (linux_nat_setup_async): Delete.
56 (_initialize_linux_nat): Adjust.
57 (lin_thread_get_thread_signals): blocked_mask is global again.
60 2009-05-11 Pierre Muller <muller.u-strasbg.fr>
64 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
65 (target_stoppped_by_watchpoint): New macro.
66 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
67 (target_have_steppable_watchpoint): New macro.
68 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
69 (target_have_continuable_watchpoint): New macro.
70 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
71 (target_can_use_hardware_watchpoint): New macro.
72 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
73 (target_region_ok_for_hw_watchpoint): New macro.
75 * breakpoint.c (update_watchpoint): Use new macros.
76 (bpstat_alloc): Likewise.
77 (create_breakpoint): Likewise.
78 (watch_command_1): Likewise.
79 (can_use_hardware_watchpoint): Likewise.
80 (do_enable_breakpoint): Likewise.
81 * infrun.c (handle_inferior_event): Adapt to new macros.
82 * mips-tdep.c (mips_gdbarch_init): Update comments.
83 * procfs.c (procfs_set_watchpoint): Update comment.
84 (procfs_insert_watchpoint): Adapt to new macros.
85 * remote-m32r-sdi.c (m32r_stop):
86 * remote-mips.c (mips_remove_breakpoint):
87 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
88 (debug_to_stopped_by_watchpoint): Likewise.
91 2009-05-10 Pierre Muller <muller.u-strasbg.fr>
93 * src/gdb/target.h: Remove all tests for already defined
94 macros. All macros defined here should not be set in config
97 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
99 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
100 (have_ptrace_getsetfpregs): Likewise.
101 fetch_all_gp_regs): New function.
102 (fetch_gp_regs): New function.
103 (fetch_all_fp_regs): Likewise.
104 (fetch_fp_regs): New function.
105 (fetch_ppc_registers): Using the new methods to fetch general-
106 purpose and floating-pointer registers.
107 (store_all_gp_regs): New function.
108 (store_gp_regs): Likewise.
109 (store_all_fp_regs): New function.
110 (store_fp_regs): Likewise.
111 (store_ppc_registers): Using the new methods to store general-
112 purpose and floating-pointer registers.
114 2009-05-08 Doug Evans <dje@google.com>
116 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
118 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
120 * MAINTAINERS (Write After Approval): Add self.
122 2009-05-07 Joel Brobecker <brobecker@adacore.com>
124 * gdbarch.h (target_gdbarch): Add comment documenting this global.
126 2009-05-06 Joel Brobecker <brobecker@adacore.com>
128 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
130 * configure: Regenerate.
132 2009-05-06 Joel Brobecker <brobecker@adacore.com>
134 * utils.c: Add include of gdb_usleep.h.
135 (defaulted_query): Detect false EOF conditions that happen
136 on terminals opened with the O_NONBLOCK flag when there is
139 2009-05-06 Pedro Alves <pedro@codesourcery.com>
141 * inferior.c (add_inferior): Move observer_notify_new_inferior
143 (add_inferior_silent): ... here.
145 2009-05-06 Pierre Muller <muller.u-strasbg.fr>
146 Pedro Alves <pedro@codesourcery.com>
148 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
149 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
151 (procfs_stopped_by_watchpoint): Made static, ptid argument
153 (_initialize_procfs): Register new watchpoint related target
155 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
156 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
157 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
158 (target_insert_watchpoint, target_remove_watchpoint): Delete.
159 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
161 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
162 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
163 (target_insert_watchpoint, target_remove_watchpoint): Delete.
164 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
166 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
167 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
168 (target_insert_watchpoint, target_remove_watchpoint): Delete.
169 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
172 2009-05-06 Hui Zhu <teawater@gmail.com>
174 * i386-tdep.c (i386_process_record): Change bzero to memset.
176 2009-05-06 Hui Zhu <teawater@gmail.com>
178 * NEWS: Add item for process record and replay.
180 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
182 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
184 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
186 * inferior.h (read_pc, write_pc): Remove.
187 * regcache.c (read_pc, write_pc): Remove.
189 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
191 (handle_inferior_event): Use regcache_read_pc instead of read_pc
192 when determining value of stop_pc. Replace subsequent uses of
193 read_pc by inspecting already-retrieved stop_pc value.
194 (keep_going): Use regcache_read_pc instead of read_pc.
196 * breakpoint.c (watchpoint_check): Use current frame architecture
197 and PC instead of current_gdbarch and read_pc ().
198 * tracepoint.c (set_traceframe_context): Replace PC argument
200 (trace_start_command, finish_tfind_command): Update calls.
201 (finish_tfind_command): Compare frame IDs to identify transitions
203 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
204 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
205 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
206 of read_pc and write_pc.
207 (store_register): Make regcache argument non-const. Update call
208 to exec_one_dummy_insn.
210 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
211 * infcmd.c (post_create_inferior): Likewise.
212 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
213 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
214 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
215 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
216 * linux-fork.c (fork_load_infrun_state): Likewise.
217 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
218 * record.c (record_wait): Likewise.
219 * procfs.c (procfs_wait): Likewise.
220 * remote-mips.c (common_open, mips_wait): Likewise.
221 * remote-m32r-sdi.c (m32r_resume): Likewise.
223 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
224 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
225 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
226 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
227 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
229 * solib-darwin.c: Include "regcache.h".
230 * solib-pa64.c: Include "regcache.h".
231 * solib-svr4.c: Include "regcache.h.".
233 * symfile.c: Do not mention read_pc or write_pc in comments.
234 * dink32-rom.c: Likewise.
235 * m32r-rom.c: Likewise.
236 * mips-tdep.c: Likewise.
238 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
240 * fork-child.c (startup_inferior): Move setting stop_pc ...
241 * infcmd.c (post_create_inferior): ... to here.
243 2009-05-04 Michael Snyder <msnyder@vmware.com>
245 * NEWS: Add item for reverse debugging commands.
247 2009-05-04 Pedro Alves <pedro@codesourcery.com>
249 * go32-nat.c (go32_stop): Delete.
250 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
251 (go32_create_inferior): Don't call go32_stop or
253 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
255 (init_go32_ops): Don't register go32_stop.
257 2009-05-02 Eli Zaretskii <eliz@gnu.org>
259 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
262 * infcall.c (find_function_addr): Avoid compiler warnings for
265 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
267 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
268 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
270 2009-05-01 Doug Evans <dje@google.com>
272 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
275 2009-05-01 Eli Zaretskii <eliz@gnu.org>
277 * record.c (_initialize_record): Reformat and clarify doc strings
278 for stop-at-limit and insn-number-max.
280 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
282 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
284 Make specifiable the make_function_type type memory ownership.
285 * gdbtypes.c (make_function_type): New parameter `objfile', use it
286 explicitely instead of TYPE-initialized removed local variable
287 `objfile'. Describe `objfile' it in the function comment.
288 (lookup_function_type): Update make_function_type callers.
289 * gdbtypes.h (make_function_type): Update the prototype.
290 * jv-lang.c (java_link_class_type): Update make_function_type callers.
291 * dwarf2read.c (read_subroutine_type): Likewise.
292 * stabsread.c (read_type): Likewise.
294 2009-05-01 Eli Zaretskii <eliz@gnu.org>
296 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
297 printing a bogus "Thread <main>".
298 (go32_thread_alive): Don't return 1 for null_ptid.
300 * i386-tdep.c (i386_go32_init_abi): Override the number of
301 registers due to non-support of SSE.
303 2009-04-30 Anthony Green <green@moxielogic.com>
305 * configure.tgt: Link the moxie simulator in with gdb.
307 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
309 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
312 2009-04-30 Hui Zhu <teawater@gmail.com>
313 Michael Snyder <msnyder@vmware.com>
315 I386 Linux process record and replay support.
317 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
318 This struct has the argument for the function
319 "record_linux_system_call".
320 (i386_linux_intx80_sysenter_record): New function. Parse the
321 system call instruction and call function
322 "record_linux_system_call" to record execute log.
323 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
324 Set "i386_linux_intx80_sysenter_record" to
325 "i386_intx80_record" and "i386_sysenter_record".
327 2009-04-30 Hui Zhu <teawater@gmail.com>
328 Michael Snyder <msnyder@vmware.com>
330 I386 architecture process record and replay support.
332 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
333 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
335 (aflag, dflag, override, modrm, mod, reg, rm, ot,
336 i386_record_pc): New variables. Ditto.
337 (i386_record_modrm, i386_record_lea_modrm_addr,
338 i386_record_lea_modrm): New functions. Ditto.
339 (i386_process_record): New function. Parse the instruction in
340 address "addr" and record the values of registers and memory
341 that will be changed by this instruction.
342 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
343 "process_record" interface.
344 * i386-tdep.h (gdbarch_tdep): New function pointers
345 "i386_intx80_record" and "i386_sysenter_record" that point to
346 the function that can record "intx80" and "sysenter" execute
349 2009-04-30 Hui Zhu <teawater@gmail.com>
350 Michael Snyder <msnyder@vmware.com>
352 * infrun.c (use_displaced_stepping): Return false if process
353 record and replay target is used.
354 (proceed): Call function "record_not_record_set" if pocess
355 record and replay target is used.
357 2009-04-30 Hui Zhu <teawater@gmail.com>
358 Michael Snyder <msnyder@vmware.com>
360 Linux process record and replay support.
362 * Makefile.in (ALLDEPFILES): Add linux-record.c.
363 (ALL_TARGET_OBS): Add linux-record.o.
364 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
365 (i[34567]86-*-linux*): Add linux-record.o.
366 * linux-record.c, linux-record.h: New file.
368 2009-04-30 Hui Zhu <teawater@gmail.com>
369 Michael Snyder <msnyder@vmware.com>
371 Process record and replay target.
373 * Makefile.in (SFILES): Add record.c.
374 (COMMON_OBS): Add record.o.
375 * record.c, record.h: New file.
377 2009-04-30 Hui Zhu <teawater@gmail.com>
378 Michael Snyder <msnyder@vmware.com>
380 * target.h (strata): New stratum "record_stratum".
382 2009-04-30 Hui Zhu <teawater@gmail.com>
383 Michael Snyder <msnyder@vmware.com>
385 GDBARCH interface for process record and replay.
387 * gdbarch.sh (process_record): This interface point to the
388 function that records the inferior execute log.
390 2009-04-29 Doug Evans <dje@google.com>
392 * i386-nat.c (child_post_startup_inferior): Delete, unused.
394 2009-04-29 Pedro Alves <pedro@codesourcery.com>
396 * breakpoint.c (print_exception_catchpoint): Access `b' directly
397 instead of `b->loc->owner'.
398 (print_mention_exception_catchpoint): Ditto.
400 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
402 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
404 2009-04-27 Tom Tromey <tromey@redhat.com>
406 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
408 2009-04-27 Jerome Guitton <guitton@adacore.com>
410 * symtab.c (append_exact_match_to_sals): New function, extracted
411 from expand_line_sal.
412 (expand_line_sal): Use append_exact_match_to_sals to append exact
413 matches. If none found, append all best items.
415 2009-04-27 Jerome Guitton <guitton@adacore.com>
417 * main.c (captured_main): Move gdbinit lookups after gdb_init.
419 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
422 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
423 (read_func_scope): Call inherit_abstract_dies.
425 2009-04-25 Eli Zaretskii <eliz@gnu.org>
427 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
428 sparc-sol2-nat.c and sparc-sol2-tdep.c.
430 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
432 2009-04-24 Pierre Muller <muller.u-strasbg.fr>
434 ARI change: Use "/* ARI: rule */" pattern.
435 * utils.c: Update ARI patterns.
436 * gdb_dirent.h: Likewise.
438 2009-04-23 Anthony Green <green@moxielogic.com>
440 * MAINTAINERS: Add moxie target.
441 * configure.tgt: Add moxie-*-elf target.
442 * moxie-tdep.c: New file.
443 * moxie-tdep.h: New file.
445 2009-04-23 Joel Brobecker <brobecker@adacore.com>
447 * ada-lang.c: Remove an extra empty line. No code change.
449 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
451 Fix double free on error inserting the breakpoint instruction.
452 * breakpoint.c (create_breakpoints): Move the
453 update_global_location_list call to ...
454 (break_command_really): ... here together with the second local call
455 both unified after all the cleanups.
457 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
458 Tom Tromey <tromey@redhat.com>
460 * configure, config.in: Regenerate.
461 * configure.ac: Support for relocatable GDB datadir. Use
462 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
463 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
464 * top.c (init_main): Add "set data-directory".
465 * defs.h (gdb_datadir): Declare.
466 * main.c (gdb_datadir): New global.
467 (captured_main): Initialize gdb_datadir. Use relocate_directory.
468 (relocate_path): New function.
469 (relocate_directory): Likewise.
470 (get_init_files): Use relocate_path.
471 (README): Mention --with-gdb-datadir.
473 2009-04-23 Joel Brobecker <brobecker@adacore.com>
475 * ada-tasks (task_command_1): Call target_find_new_threads.
477 2009-04-23 Joel Brobecker <brobecker@adacore.com>
479 * stack.c (do_gdb_disassembly): Print the exception message if an
480 error was thrown while trying to perform the disassembly.
482 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
484 * varobj.c (free_variable): Replace free_current_contents by xfree.
486 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
488 * arm-linux-nat.c (fetch_register, store_register): Use
489 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
490 * arm-linux-tdep.c (arm_linux_supply_gregset,
491 arm_linux_collect_gregset): Likewise.
492 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
493 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
495 2009-04-22 Hui Zhu <teawater@gmail.com>
497 * stack.c (_initialize_stack): Set the default of
498 disassemble-next-line to off.
500 2009-04-21 Tom Tromey <tromey@redhat.com>
502 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
503 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
505 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
507 * configure.ac: Add quotes to not lose brackets in help text.
508 * configure: Rebuild.
510 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
512 * configure.ac: Don't postprocess Makefile in config.status.
513 Substitute GDB_NM_FILE. Don't substitute nm_h.
514 * Makefile.in (GDB_NM_FILE): Substitute.
515 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
516 * configure: Regenerate.
517 * gnulib/Makefile.in: Regenerate.
519 2009-04-21 Joseph Myers <joseph@codesourcery.com>
521 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
522 --with-htmldir): New.
523 * configure: Regenerate.
525 2009-04-21 Tom Tromey <tromey@redhat.com>
527 * configure: Rebuild.
528 * configure.ac: Use lower case for start of help strings. Clean
529 up --with-sysroot help.
531 2009-04-21 Tom Tromey <tromey@redhat.com>
533 * configure: Rebuild.
534 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
535 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
538 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
540 ARI fix: remove "%p".
541 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
542 (ia64_sigtramp_frame_this_id): Ditto.
543 (ia64_libunwind_frame_this_id): Ditto.
544 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
545 * symmisc.c (maintenance_info_psymtabs): Ditto.
547 2009-04-21 Joseph Myers <joseph@codesourcery.com>
549 * configure.ac (--with-relocated-sources): New.
550 * configure, config.in: Regenerate.
551 * source.c (add_substitute_path_rule): Remove static.
552 * source.h (add_substitute_path_rule): Declare.
553 * main.c: Include "source.h".
554 (captured_main): Add substitution rule if RELOC_SRCDIR.
556 2009-04-21 Pierre Muller <muller.u-strasbg.fr>
558 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
560 2009-04-20 David Daney <ddaney@caviumnetworks.com>
562 * NEWS: Mention MIPS/Linux hardware watchpoint support.
564 2009-04-20 David Daney <ddaney@caviumnetworks.com>
566 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
567 (maint_show_dr, super_close): New variables.
568 (super_fetch_registers, super_store_registers): Make static.
569 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
570 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
571 (pt_watch_style): Define new enum.
572 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
574 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
576 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
577 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
578 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
579 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
580 (type_to_irw, fill_mask, try_one_watch)
581 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
582 (mips_linux_new_thread, populate_regs_from_watches)
583 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
584 (mips_linux_close): New functions.
585 (_initialize_mips_linux_nat): Register watchpoint functions with
586 the target_ops. Add show-debug-regs maintenance command.
588 2009-04-20 David Daney <ddaney@caviumnetworks.com>
590 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
592 2009-04-19 Pedro Alves <pedro@codesourcery.com>
594 * NEWS: Mention gdbserver support for x86 Windows CE.
596 2009-04-19 Eli Zaretskii <eliz@gnu.org>
598 * config/djgpp/fnchange.lst: Fix typos.
600 Set default host and target charsets in the DJGPP port.
602 * config/djgpp/config.sed (am_cv_langinfo_codeset)
603 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
604 in all configure scripts that define ac_cv_env_CPP_value.
606 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
609 * config/djgpp/nl_types.h: New file.
611 * config/djgpp/langinfo.h: New file.
613 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
615 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
617 * Makefile.in (MAKEHTML): Set to makeinfo --html.
618 (MAKEHTMLFLAGS): Set to empty.
620 2009-04-18 Eli Zaretskii <eliz@gnu.org>
622 * NEWS: Mention all new set/show commands added since GDB 6.8 was
625 * go32-nat.c (go32_sysinfo): Check if the call to
626 __dpmi_get_capabilities fills the buffer with information, and
627 don't use the buffer if not.
629 2009-04-17 Tom Tromey <tromey@redhat.com>
631 * charset.c (_initialize_charset): Add special case for "646".
633 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
635 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
636 * configure: Regenerate.
637 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
638 configure substitutions.
639 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
641 2009-04-17 Pierre Muller <muller.u-strasbg.fr>
643 ARI fix: Do not use %p, replace by call to host_address_to_string
645 * darwin-nat.c (darwin_xfer_partial): Apply change.
646 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
647 * gnu-nat.h (proc_debug): Ditto.
648 * symmisc.c (maintenance_info_symtabs): Ditto.
649 (maintenance_info_psymtabs): Ditto.
650 * windows-nat.c (handle_load_dll): Ditto.
651 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
652 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
654 2009-04-17 Joseph Myers <joseph@codesourcery.com>
656 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
658 (sparc-*-linux*): Likewise.
660 2009-04-17 Eli Zaretskii <eliz@gnu.org>
662 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
665 2009-04-16 Pedro Alves <pedro@codesourcery.com>
667 * remote.c (remote_query_attached): Fix pasto in packet_ok result
670 2009-04-16 Joel Brobecker <brobecker@adacore.com>
672 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
673 Revert the previous change. Might not be correct, actually.
675 2009-04-16 Joel Brobecker <brobecker@adacore.com>
677 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
678 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
679 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
680 Remove declaration. These are non-existent functions.
682 2009-04-16 Joel Brobecker <brobecker@adacore.com>
684 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
685 Fix a compilation warning on mips-irix due to casting from
686 a pointer of different size.
688 2009-04-16 Joel Brobecker <brobecker@adacore.com>
690 * ada-lang.c (symtab_for_sym): Delete.
691 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
693 2009-04-16 Joel Brobecker <brobecker@adacore.com>
695 * ada-lang.c (extract_string): Delete.
696 (ada_main_name): Reimplement using target_read_string instead of
699 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
701 * m68klinux-nat.c: Remove obsolete comment.
702 (fetch_register, store_register): Don't call
703 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
704 which are always nops here.
706 2009-04-14 Tom Tromey <tromey@redhat.com>
708 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
709 (c_printstr): Likewise.
710 * charset.c: Include gdb_wait.h.
711 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
712 (find_charset_names): Use pexecute. Handle libiconv's output.
714 (_initialize_charset): Use xstrdup.
715 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
717 (INTERMEDIATE_ENCODING): New define.
718 * configure, config.in: Rebuild.
719 * configure.ac: Check for btowc.
721 2009-04-15 Tom Tromey <tromey@redhat.com>
723 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
725 2009-04-15 Eli Zaretskii <eliz@gnu.org>
727 * utils.c (parse_escape): Initialize target_char to pacify GCC.
729 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
731 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
733 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
735 ARI fix: sprintf rule.
736 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
737 * ada-lang.c (add_angle_brackets): Use xstrprintf.
738 (ada_decode): Replace sprintf by xsnprintf.
739 (find_old_style_renaming_symbol): Ditto.
740 (ada_to_fixed_type_1, ada_enum_name): Ditto.
743 2009-04-14 Joel Brobecker <brobecker@adacore.com>
745 * target.c (target_mourn_inferior): Call bfd_cache_close_all
746 after having executed the target mourn_inferior routine.
748 2009-04-14 Eli Zaretskii <eliz@gnu.org>
750 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
753 2009-04-13 David Daney <ddaney@caviumnetworks.com>
755 * infrun.c (maybe_software_singlestep): New function.
756 (resume): Call maybe_software_singlestep.
757 (handle_inferior_event): Same.
759 2009-04-13 Tom Tromey <tromey@redhat.com>
761 * python/python-frame.c (frapy_richcompare): Return
762 Py_NotImplemented, not an error. Handle Py_NE as well.
764 2009-04-13 Eli Zaretskii <eliz@gnu.org>
766 * charset.c (EILSEQ): Define if not defined by system headers.
768 2009-04-11 Eli Zaretskii <eliz@gnu.org>
770 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
771 to be consistent with renaming config.intl.in into config_intl.in.
773 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
774 consistent with the change from 2008-11-09.
776 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
778 * gdbtypes.c: Remove excessive parentheses at the return keywords.
779 * varobj.c (varobj_invalidate): Fix indentation.
780 * varobj.c (varobj_invalidate): Fix formatting text width.
782 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
784 Implement -exec-jump.
786 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
787 * mi/mi-main.c (mi_cmd_exec_jump): New.
788 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
790 2009-04-07 Doug Evans <dje@google.com>
792 * symfile.c (symbol_file_clear): Fix indentation.
794 2009-04-06 Mark Kettenis <kettenis@gnu.org>
796 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
798 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
800 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
801 (ppc_linux_auxv_parse): New function.
802 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
803 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
805 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
807 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
808 BFD to contents of SPU name note.
809 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
810 with "from_tty" argument 1 instead of 0.
812 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
815 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
816 Create the symbol in local scope.
817 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
819 2009-04-02 Keith Seitz <keiths@redhat.com>
821 * stabsread.c (read_member_functions): GCC may emit an extra space
822 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
823 whitespace when looking for these functions.
825 2009-04-01 Joel Brobecker <brobecker@adacore.com>
827 Change the default value for "set print frame-arguments" to scalars.
829 * stack.c (print_frame_arguments): Set initial value to "scalars".
831 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
833 * mips-tdep.c (mips_numeric_register_alieses): New definition.
834 (mips_gdbarch_init): Add user registers from
835 mips_numeric_register_aliases.
837 2009-04-01 Joel Brobecker <brobecker@adacore.com>
839 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
841 2009-04-01 Joel Brobecker <brobecker@adacore.com>
843 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
844 this is the last one.
846 2009-04-01 Pedro Alves <pedro@codesourcery.com>
848 * remote.c (append_resumption): New.
849 (remote_vcont_resume): Use it.
851 2009-04-01 Joel Brobecker <brobecker@adacore.com>
853 * windows-nat.c (+windows_get_ada_task_ptid): New function.
854 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
856 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
857 Keith Seitz <keiths@redhat.com>
858 Jan Kratochvil <jan.kratochvil@redhat.com>
861 * Makefile.in (dbxread.o): Update.
862 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
863 * dwarf2read.c (GDB_FORM_cached_string): New.
864 (read_partial_die): Use dwarf2_canonicalize_name.
865 (dwarf2_linkage_name): Use dwarf2_name.
866 (dwarf2_canonicalize_name): New.
867 (dwarf2_name): Use dwarf2_canonicalize_name.
868 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
869 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
870 * symtab.c (lookup_symbol_in_language): Canonicalize input before
872 * cp-name-parser.y: operator() requires two parameters,
873 according to libiberty.
874 * minsyms.c (lookup_minimal_symbol): Canonicalize input
878 2009-03-31 Joel Brobecker <brobecker@adacore.com>
880 Provide support for (Ada) task-specific breakpoints.
882 * ada-lang.h (ada_get_task_number): Add declaration.
883 (breakpoint_ada_task_match): Delete declaration.
884 * ada-tasks.c (ada_get_task_number): Make non-static.
885 * breakpoint.h (struct breakpoint): Add field "task".
886 * breakpoint.c (print_one_breakpoint_location): Add handling of
887 task-specific breakpoints.
888 (create_breakpoint, create_breakpoints, find_condition_and_thread):
889 New parameter "task".
890 (break_command_really): Update calls to find_condition_and_thread
891 and create_breakpoints.
892 (breakpoint_re_set_one): Update call to find_condition_and_thread.
895 2009-03-31 Joel Brobecker <brobecker@adacore.com>
897 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
899 2009-03-31 Pedro Alves <pedro@codesourcery.com>
901 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
902 if the thread's ptid without a thread id field is in the list
903 before calling thread_change_ptid.
904 (extended_remote_attach_1): In non-stop mode, do not rely on
905 querying the current thread, instead, query the thread list, and
906 select the first thread of the process.
907 * gdbthread.h (first_thread_of_process): Declare.
908 * thread.c (first_thread_of_process): Define.
910 2009-03-30 Stan Shebs <stan@codesourcery.com>
912 Make tracepoints into a type of breakpoint.
913 * breakpoint.h (enum bptype): Add bp_tracepoint.
914 (struct breakpoint): Add fields step_count, pass_count, actions.
915 (get_tracepoint, get_tracepoint_by_number): Declare.
916 (all_tracepoints): Declare.
917 * breakpoint.c: Include tracepoint.h, readline.h.
918 (ALL_TRACEPOINTS): Move here from tracepoint.c.
919 (tracepoint_count): Ditto.
920 (should_be_inserted): GDB does not insert tracepoints itself.
921 (print_it_typical): Add tracepoint case.
922 (bpstat_what): Ditto.
923 (print_one_breakpoint_location): Ditto, and add printing for
924 pass count, step count, and action list.
925 (user_settable_breakpoint): Add tracepoint case.
926 (allocate_bp_location): Ditto.
927 (set_breakpoint_location_function): Ditto.
928 (disable_breakpoints_in_shlibs): Ditto.
930 (break_command_really): Add argument traceflag, use to choose
931 basic breakpoint type.
932 (break_command_1): Pass extra argument.
933 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
934 (breakpoint_re_set_one): Add tracepoint case.
935 (disable_command, enable_command): Ditto.
936 (set_tracepoint_count): Move here from tracepoint.c.
937 (trace_command): Move here from tracepoint.c and use
938 break_command_really.
939 (tracepoints_info): Move here from tracepoint.c and call
941 (enable_trace_command): Move here from tracepoint.c and call
943 (disable_trace_command): Move here from tracepoint.c and call
945 (delete_trace_command): Move here from tracepoint.c and call
947 (trace_pass_command): Move here from tracepoint.c.
948 (get_tracepoint_by_number): Ditto.
949 (tracepoint_save_command): Ditto.
950 (get_tracepoint): New function.
951 (all_tracepoints): New function.
952 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
953 deprecate "enable trace" and "disable trace" commands.
954 * tracepoint.h (struct tracepoint): Remove.
955 (tracepoint_chain): Remove decl.
956 (deprecated_create_tracepoint_hook): Remove decl.
957 (deprecated_delete_tracepoint_hook): Remove decl.
958 (deprecated_modify_tracepoint_hook): Remove decl.
959 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
960 (free_actions): Update signature.
961 (validate_actionline): Update signature.
962 (end_actions_pseudocommand): Declare.
963 (while_stepping_pseudocommand): Declare.
964 * tracepoint.c: Include breakpoint.h.
965 (tracepoint_chain, tracepoint_count): Remove.
966 (free_actions, make_cleanup_free_actions): Update signature.
967 (trace_command, set_raw_tracepoint): Remove.
968 (trace_mention): Remove.
969 (tracepoints_info): Remove.
970 (tracepoint_operation, map_args_over_tracepoints): Remove.
971 (get_tracepoint_by_number): Remove.
972 (enable_trace_command, disable_trace_command): Remove.
973 (delete_trace_command, trace_pass_command): Remove.
974 (trace_actions_command, read_actions): Update signature.
975 (validate_actionline): Update signature, use bp loc.
976 (encode_actions): Ditto.
977 (download_tracepoint): New function, body of trace_start_command.
978 (trace_start_command): Call it, use all_tracepoints.
979 (tracepoint_save_command): Remove.
980 (tracepoint_dump_command): Use get_tracepoint.
981 (end_actions_pseudocommand): Make globally visible.
982 (while_stepping_pseudocommand): Ditto.
983 (_initialize_tracepoint): Move command definitions to breakpoint.c.
985 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
987 Expose frames to Python.
988 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
989 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
990 (python-frame.o): New target.
991 * python/python-frame.c: New file.
992 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
993 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
994 gdbpy_initialize_frames): New prototypes.
995 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
996 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
998 * stack.c (find_frame_funname): New function, factored out of
1000 (print_frame): Call find_frame_funname.
1001 * stack.h (find_frame_funname): Add prototype.
1003 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1005 Remove unused value_object attribute `owned_by_gdb'.
1006 * python/python-value.c (value_object): Remove owned_by_gdb
1008 (valpy_dealloc): Remove reference to self->owned_by_gdb.
1009 (valpy_new): Likewise.
1010 (value_to_value_object): Likewise.
1012 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
1014 Change gdb.Value.address from a method to an attribute.
1015 * python/python-value.c (value_object): Add `address' element.
1016 (valpy_dealloc): Decrement reference to self->address if set.
1017 (valpy_new): Initialize val_obj->address.
1018 (valpy_address): Rename to ...
1019 (valpy_get_address): ... this. Change signature from method to
1020 attribute. Update self->address if not set.
1021 (value_to_value_object): Initialize val_obj->address.
1022 (value_object_getset): Add `address' element.
1023 (value_object_methods): Remove `address' element.
1025 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
1027 * observer.sh: Set LANG/LC_ALL to C, not c.
1029 2009-03-28 Kevin Buettner <kevinb@redhat.com>
1031 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
1034 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1036 * remote.c (remote_stop_ns): If multi-process extensions are off,
1037 and GDB is requesting the whole process to stop, sent "vCont;t",
1040 2009-03-28 Pedro Alves <pedro@codesourcery.com>
1042 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
1045 2009-03-27 Eli Zaretskii <eliz@gnu.org>
1047 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
1049 2009-03-26 Doug Evans <dje@google.com>
1051 * thread.c (do_restore_current_thread_cleanup): Redo test for
1052 whether to restore old->inferior_ptid.
1054 2009-03-26 Tom Tromey <tromey@redhat.com>
1056 * breakpoint.c (resolve_sal_pc): Preserve original line number
1057 when skipping prologue.
1059 2009-03-26 Doug Evans <dje@google.com>
1061 * thread.c (inferior_thread) Remove "extern" in definition.
1063 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
1065 Add gdb.Value.is_optimized_out attribute.
1066 * python/python-value.c (valpy_get_is_optimized_out): New
1068 (value_object_getset): New variable.
1069 (value_object_type): Initialize tp_getset element.
1071 2009-03-26 Joel Brobecker <brobecker@adacore.com>
1073 Recognize missing DW_AT_location as <value optimized out>.
1075 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
1076 Call add_symbol_to_list.
1078 2009-03-25 Tom Tromey <tromey@redhat.com>
1080 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
1081 * stack.c (print_this_frame_argument_p): Use check_typedef.
1083 2009-03-25 Tom Tromey <tromey@redhat.com>
1085 * configure: Rebuild.
1086 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
1087 Rearrange flags setting. Add comments.
1089 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1091 * config/i386/nm-i386.h: Remove code within
1092 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
1093 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
1095 * config/i386/nm-cygwin64.h: Ditto.
1096 * config/i386/nm-fbsd.h: Ditto.
1097 * config/i386/nm-go32.h: Ditto.
1098 * config/i386/nm-linux.h: Ditto.
1099 * config/i386/nm-linux64.h: Ditto.
1101 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1103 ARI fix: "xasprintf" rule.
1104 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
1106 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1108 * remote.c (remote_start_remote): In non-stop mode, call
1109 init_wait_for_inferior before adding threads and inferiors.
1111 2009-03-25 Joel Brobecker <brobecker@adacore.com>
1113 * breakpoint.c (breakpoint_thread_match): Split a large condition
1114 into several smaller conditions. No behavior change.
1116 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1118 * infrun.c (infrun_thread_thread_exit): New.
1119 (_initialize_infrun): Attach it to the thread_exit observer.
1120 * thread.c (delete_thread_1): Always call the observer, passing it
1122 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
1123 SILENT, return immediately.
1125 2009-03-25 Pedro Alves <pedro@codesourcery.com>
1127 * infrun.c (normal_stop): Use has_stack_frames instead of
1129 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
1130 when there is no thread selected.
1131 (mi_cmd_execute): Don't special case commands that can run without
1132 a valid selected thread.
1133 * top.c (execute_command): Don't special case commands that can
1134 run without a valid selected thread. Use has_stack_frames.
1135 * infcmd.c (ensure_valid_thread): New.
1136 (continue_1, step_1, jump_command, signal_command): Use it.
1137 (detach_command): Error out if there's no selected thread/inferior.
1138 * thread.c (print_thread_info): Allow having no thread selected.
1139 (switch_to_thread): Don't read the PC if there is no current thread.
1140 (do_restore_current_thread_cleanup): Don't record the current
1141 frame if there is no current thread.
1142 (make_cleanup_restore_current_thread): Don't read frame info if
1143 there is no selected thread.
1144 (_initialize_thread): Don't mark commands as
1145 "no_selected_thread_ok".
1146 * frame.c (get_current_frame): Error out if there is no valid
1148 (has_stack_frames): Return false if there is no valid
1150 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
1151 "no_selected_thread_ok".
1152 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
1153 (get_cmd_no_selected_thread_ok): Delete.
1154 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
1155 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
1157 * stack.c (get_selected_block): Use has_stack_frames.
1159 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
1161 Fix size of FPSCR in Power 7 processors.
1162 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
1163 (PPC_FEATURE_HAS_DFP): New #define.
1164 (ppc_linux_read_description): Check for DFP feature instead of
1165 ISA 2.05 to decide on size of the FPSCR.
1167 2009-03-25 Kevin Buettner <kevinb@redhat.com>
1169 * mn10300-tdep.c (trad-frame.h): Don't include.
1170 (prologue-value.h): Include.
1171 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
1172 (struct mn10300_prologue): Define.
1173 (push_reg, translate_rreg, check_for_saved): New functions.
1174 (mn10300_analyze_prologue): Rewrite, using prologue-value
1175 machinery. Handle more instructions than before. Permit
1176 instructions to occur in any order.
1177 (mn10300_skip_prologue): Find the extents of the function
1178 in question; mn10300_analyze_prologue no longer does this.
1179 (mn10300_analyze_frame_prologue): New function.
1180 (mn10300_frame_base): New function.
1181 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
1183 (mn10300_frame_prev_register): Likewise.
1184 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
1185 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
1187 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
1189 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1191 Fix completer problem for filename completion on the first try.
1193 * gdb/completer.h (gdb_completion_word_break_characters): New function.
1194 * gdb/completer.c: Include gdb_assert.h.
1195 (complete_line_internal_reason): New enum.
1196 (complete_line_internal): Change last argument type to
1197 complete_line_internal_reason.
1198 Modify function to handle the different complete_line_internal_reason
1200 (complete_line): Adapt to change in complete_line_internal.
1201 (command_completer): Ditto.
1202 (gdb_completion_word_break_characters): Implement new function.
1203 * top.c (init_main): Set rl_completion_word_break_hook to
1204 gdb_completion_word_break_characters.
1207 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
1209 ARI fix: "strlen d_name" rule.
1210 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
1213 2009-03-24 Tom Tromey <tromey@redhat.com>
1214 Pedro Alves <pedro@codesourcery.com>
1216 * configure, config.in: Rebuild.
1217 * configure.ac: Check for libiconvlist.
1218 * charset.c: Check HAVE_LIBICONVLIST.
1219 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
1220 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
1221 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
1223 (INTERNAL_CFLAGS_BASE): Update.
1224 (INTERNAL_LDFLAGS): Update.
1227 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1229 * configure.ac: Initialize the variable $PREFER_CURSES.
1230 * configure: Regenerated.
1232 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1234 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
1235 * configure: Regenerated.
1237 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
1239 ARI fix: "strerror" rule.
1240 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
1241 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
1243 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1245 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
1246 before looking up the fields inside our struct type.
1248 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1250 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
1251 trying to resolve the type qualification.
1253 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1255 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
1256 we try to apply the attribute on the real type, rather than
1257 its associated typedef.
1259 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1261 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
1262 to make sure we try to get the modulus of the actual type, not the
1265 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1267 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
1268 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
1269 to get the real type, not the associated typedef.
1271 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1273 * ada-lang.c (ada_get_field_index): Add handling of the case
1274 when TYPE is a typedef of a struct.
1276 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1278 Add gdb_usleep as a portable version of usleep based on gdb_select.
1279 * gdb_usleep.h, gdb_usleep.c: New files.
1280 * Makefile.in (SFILES): Add gdb_usleep.c.
1281 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
1282 (COMMON_OBS): Add gdb_usleep.o.
1283 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
1284 by call to gdb_usleep.
1286 2009-03-23 Joel Brobecker <brobecker@adacore.com>
1288 * buildsym.c (end_symtab): If we ignore the subfiles, then
1289 unlink the associated symtabs if they were already allocated.
1291 2009-03-23 Jerome Guitton <guitton@adacore.com>
1293 Provide a way to force building of GDB with libcurses.
1294 * configure.ac: Add --with-curses.
1295 * configure: Regenerated.
1297 2009-03-23 Tom Tromey <tromey@redhat.com>
1299 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
1302 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
1304 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
1305 solib_contains_address_p instead of searching.
1307 2009-03-23 Tom Tromey <tromey@redhat.com>
1309 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
1310 (iconv): Make 'inbuf' argument const.
1311 (convert_between_encodings): Use ICONV_CONST.
1312 (wchar_iterate): Likewise.
1314 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1316 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
1317 dynamically loaded function.
1318 (LookupPrivilegeValueA): Ditto.
1319 (OpenProcessToken): Ditto.
1320 (AdjustTokenPrivileges): Rename and define placeholder for address of
1321 dynamically loaded function.
1322 (LookupPrivilegeValueA): Ditto.
1323 (OpenProcessToken): Ditto.
1324 (set_process_privilege): Remove check for loaded functions.
1325 (bad_OpenProcessToken): Define.
1326 (_initialize_loadable): Load token functions from advapi here, setting
1327 OpenProcessToken function to a dummy static function which always return
1328 error if OS doesn't support this functionality.
1330 2009-03-22 Nicolas Roche <roche@adacore.com>
1331 Christopher Faylor <me+cygwin@cgf.cx>
1333 * win32-nat.c (ctrl_c_handler): New function.
1334 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
1335 is run in a separate console.
1337 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
1339 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
1340 for dynamically loaded function.
1341 (DebugBreakProcess): Ditto.
1342 (DebugSetProcessKillOnExit): Ditto.
1343 (EnumProcessModules): Ditto.
1344 (GetModuleFileNameExA): Ditto.
1345 (GetModuleInformation): Ditto.
1346 (DebugActiveProcessStop): Rename and define placeholder for address of
1347 dynamically loaded function.
1348 (DebugBreakProcess): Ditto.
1349 (DebugSetProcessKillOnExit): Ditto.
1350 (EnumProcessModules): Ditto.
1351 (GetModuleFileNameExA): Ditto.
1352 (GetModuleInformation): Ditto.
1353 (psapi_loaded): Delete.
1354 (get_module_name): Don't check psapi_loaded, just rely on the fact that
1355 dynamically loaded functions will return failure if they weren't
1357 (has_detach_ability): Delete.
1358 (windows_attach): Remove call to has_detach_ability (). Just rely on
1359 functions being callable.
1360 (bad_DebugActiveProcessStop): Define.
1361 (bad_DebugBreakProcess): Ditto.
1362 (bad_DebugSetProcessKillOnExit): Ditto.
1363 (bad_EnumProcessModules): Ditto.
1364 (bad_GetModuleFileNameExA): Ditto.
1365 (bad_GetModuleInformation): Ditto.
1366 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
1367 dynamic storage here, setting nonexistent functions to dummy static
1368 functions which always return error.
1370 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1372 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
1373 to the about_to_proceed observer notification.
1374 (mi_about_to_proceed): New.
1375 (mi_on_resume): Only output ^running and the prompt here if the
1376 target was proceeded.
1377 * breakpoint.c (breakpoint_proceeded): New static.
1378 (breakpoint_about_to_proceed): New.
1379 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
1380 the about_to_proceed observer notification.
1381 * inferior.h (breakpoint_proceeded): Delete declaration.
1382 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
1383 Notify the about_to_proceed observers.
1384 (struct inferior_status): Delete breakpoint_proceeded member.
1385 (save_inferior_status): Don't save it.
1386 (restore_inferior_status): Don't restore it.
1387 * mi-main.h (mi_proceeded): Declare.
1388 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
1391 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1393 * gdbthread.h (struct thread_info): Add in_infcall member.
1394 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
1395 Remove reverences to suppress_resume_observer. Refresh
1396 `call_thread' after returning from `proceed'.
1397 * infcmd.c (suppress_resume_observer): Delete.
1398 * inferior.h (suppress_resume_observer): Delete declaration.
1399 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
1401 * thread.c (set_running): Remove references to
1402 suppress_resume_observer.
1403 * infrun.c (struct inferior_status): Add in_infcall member.
1404 (save_inferior_status): Save it.
1405 (restore_inferior_status): Restore it.
1407 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1409 * infcall.c (run_inferior_call): Remove references to
1410 suppress_stop_observer.
1411 * infcmd.c (suppress_stop_observer): Delete.
1412 (finish_command_continuation): Remove NOTE. Don't clear
1413 suppress_stop_observer anymore.
1414 (finish_command_continuation_free_arg): Likewise.
1415 (finish_forward): Remove references to suppress_stop_observer.
1416 Call normal_stop observer if we haven't already.
1417 * inferior.h (suppress_stop_observer): Delete.
1418 * infrun.c (normal_stop): When deciding to suppress the
1419 normal_stop observer, check for proceed_to_finish instead of
1420 suppress_stop_observer.
1422 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1424 * symfile.c (symfile_relocate_debug_section): Remove check for
1427 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1428 Jim Blandy <jimb@red-bean.com>
1429 Thiago Jung Bauermann <bauerman@br.ibm.com>
1430 Tom Tromey <tromey@redhat.com>
1432 Miscellaneous fixes to the Python code.
1433 * python/python-cmd.c (cmdpy_init): Accept keyword
1435 * python/python-value.c (valpy_string): Accept keyword
1437 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
1438 Do not call value_to_value_object on NULL RES_VAL.
1439 (value_object_methods): Change `string' entry to also accept
1441 (convert_value_from_python): Return a copy of the value if obj is
1443 (value_object_methods): Mark the `string' method as accepting
1444 keywords, and show method "prototype" in the doc string.
1445 * python/python.c (get_parameter): Don't return inside a
1448 2009-03-20 Tom Tromey <tromey@redhat.com>
1450 Add support for convenience functions in Python.
1451 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
1452 (SUBDIR_PYTHON_SRCS): Add python-function.c.
1453 (python-function.o): New target.
1454 * eval.c: Include "python/python.h" and <ctype.h>.
1455 (evaluate_subexp_standard): Handle values of type
1456 TYPE_CODE_INTERNAL_FUNCTION.
1457 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
1458 * parse.c (write_exp_string): Remove duplicate word in comment.
1459 * python/python-function.c: New file.
1460 * python/python-internal.h (gdbpy_initialize_functions): Add
1462 * python/python.c (_initialize_python): Call
1463 gdbpy_initialize_functions.
1464 * valprint.c (value_check_printable): Handle values of type
1465 TYPE_CODE_INTERNAL_FUNCTION.
1466 * value.c: Include "cli/cli-decode.h".
1467 (internal_function): New struct.
1468 (functionlist, internal_fn_type): New static variables.
1469 (lookup_only_internalvar,
1470 lookup_internalvar): Add const qualifier to name argument.
1471 (create_internalvar): Likewise. Initialize new field.
1472 (set_internal_var): Fix typo in comment. Don't allow assignment
1473 to canonical variable.
1474 (value_create_internal_function, value_internal_function_name,
1475 call_internal_function, function_command, function_destroyer,
1476 add_internal_function): New functions.
1477 (_initialize_values): Create `function' placeholder command.
1478 Initialize internal_fn_type.
1479 * value.h (lookup_only_internalvar, create_internalvar,
1480 lookup_internalvar): Add const qualifier to name argument.
1481 (internal_function_fn, add_internal_function, call_internal_function,
1482 value_internal_function_name): Add prototypes.
1483 (struct internalvar) <canonical>: New field.
1485 2009-03-20 Tom Tromey <tromey@redhat.com>
1487 * c-lang.c (evaluate_subexp_c): Call check_typedef.
1489 2009-03-20 Tom Tromey <tromey@redhat.com>
1490 Julian Brown <julian@codesourcery.com>
1492 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
1493 PR i18n/9401, PR exp/9613:
1495 * value.h (value_typed_string): Declare.
1496 (val_print_string): Update.
1497 * valprint.h (print_char_chars): Update.
1498 * valprint.c (print_char_chars): Add type argument. Update.
1499 (val_print_string): Likewise.
1500 * valops.c (value_typed_string): New function.
1501 * utils.c (host_char_to_target): New function.
1502 (parse_escape): Use host_char_to_target, host_hex_value. Update.
1504 (no_control_char_error): Remove.
1505 * typeprint.c (print_type_scalar): Update.
1506 * scm-valprint.c (scm_scmval_print): Update.
1507 * scm-lang.h (scm_printchar, scm_printstr): Update.
1508 * scm-lang.c (scm_printchar): Add type argument.
1509 (scm_printstr): Likewise.
1510 * printcmd.c (print_formatted): Update.
1511 (print_scalar_formatted): Update.
1512 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
1513 Handle '%lc' and '%ls'.
1514 * parser-defs.h (struct typed_stoken): New type.
1515 (struct stoken_vector): Likewise.
1516 (write_exp_string_vector): Declare.
1517 * parse.c (write_exp_string_vector): New function.
1518 * p-valprint.c (pascal_val_print): Update.
1519 * p-lang.h (is_pascal_string_type, pascal_printchar,
1520 pascal_printstr): Update.
1521 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
1522 Add 'char_type' argument.
1523 (pascal_emit_char): Add type argument.
1524 (pascal_printchar): Likewise.
1525 (pascal_printstr): Likewise.
1526 * objc-lang.c (objc_emit_char): Add type argument.
1527 (objc_printchar): Likewise.
1528 (objc_printstr): Likewise.
1529 * macroexp.c (get_character_constant): Handle unicode characters.
1531 (get_string_literal): Handle unicode strings. Use
1533 * m2-valprint.c (print_unpacked_pointer): Update.
1534 (m2_print_array_contents): Update.
1535 (m2_val_print): Update.
1536 * m2-lang.c (m2_emit_char): Add type argument.
1537 (m2_printchar): Likewise.
1538 (m2_printstr): Likewise.
1539 * language.h (struct language_defn) <la_printchar>: Add type
1541 <la_printstr, la_emitchar>: Likewise.
1542 (LA_PRINT_CHAR): Likewise.
1543 (LA_PRINT_STRING): Likewise.
1544 (LA_EMIT_CHAR): Likewise.
1545 * language.c (unk_lang_emit_char): Add type argument.
1546 (unk_lang_printchar): Likewise.
1547 (unk_lang_printstr): Likewise.
1548 * jv-valprint.c (java_val_print): Update.
1549 * jv-lang.c (java_emit_char): Add type argument.
1550 * f-valprint.c (f_val_print): Update.
1551 * f-lang.c (f_emit_char): Add type argument.
1552 (f_printchar): Likewise.
1553 (f_printstr): Likewise.
1554 * expprint.c (print_subexp_standard): Update.
1555 * charset.h (target_wide_charset): Declare.
1556 (c_target_char_has_backslash_escape, c_parse_backslash,
1557 host_char_print_literally, host_char_to_target,
1558 target_char_to_host, target_char_to_control_char): Remove.
1559 (enum transliterations): New type.
1560 (convert_between_encodings): Declare.
1561 (HOST_ESCAPE_CHAR): New define.
1562 (host_letter_to_control_character, host_hex_value): Declare.
1563 (enum wchar_iterate_result): New enum.
1564 (struct wchar_iterator): Declare.
1565 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1566 wchar_push_back): Declare.
1567 * charset-list.h: New file.
1568 * c-valprint.c (textual_name): New function.
1569 (textual_element_type): Handle wide character types.
1570 (c_val_print): Pass original type to textual_element_type. Handle
1571 wide character types.
1572 (c_value_print): Use textual_element_type. Pass original type of
1574 * c-lang.h (enum c_string_type): New type.
1575 (c_printchar, c_printstr): Update.
1576 * c-lang.c (classify_type): New function.
1577 (print_wchar): Likewise.
1578 (c_emit_char): Add type argument. Handle wide characters.
1579 (c_printchar): Likewise.
1580 (c_printstr): Add type argument. Handle wide and multibyte
1582 (convert_ucn): New function.
1583 (emit_numeric_character): Likewise.
1584 (convert_octal): Likewise.
1585 (convert_hex): Likewise.
1586 (ADVANCE): New macro.
1587 (convert_escape): New function.
1588 (parse_one_string): Likewise.
1589 (evaluate_subexp_c): Likewise.
1590 (exp_descriptor_c): New global.
1591 (c_language_defn): Use exp_descriptor_c.
1592 (cplus_language_defn): Likewise.
1593 (asm_language_defn): Likewise.
1594 (minimal_language_defn): Likewise.
1595 (charset_for_string_type): New function.
1596 * c-exp.y (%union): Add 'svec' and 'tsval'.
1598 (exp): Add CHAR production.
1599 (string_exp): Rewrite.
1600 (exp) <string_exp>: Rewrite.
1601 (tempbuf): Now global.
1602 (tempbuf_init): New global.
1603 (parse_string_or_char): New function.
1604 (yylex) <tempbuf>: Now global.
1605 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
1607 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
1608 (c_parse_escape): New function.
1609 * auxv.c (fprint_target_auxv): Update.
1610 * ada-valprint.c (ada_emit_char): Add type argument.
1611 (ada_printchar): Likewise.
1612 (ada_print_scalar): Update.
1613 (printstr): Add type argument. Update calls to ada_emit_char.
1614 (ada_printstr): Add type argument.
1615 (ada_val_print_array): Update.
1616 (ada_val_print_1): Likewise.
1617 * ada-lang.c (emit_char): Add type argument.
1618 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
1620 * gdb_locale.h: Include langinfo.h.
1621 * charset.c (_initialize_charset): Set default host charset from
1622 the locale. Don't register charsets. Add target-wide-charset
1623 commands. Call find_charset_names.
1624 (struct charset, struct translation): Remove.
1625 (GDB_DEFAULT_HOST_CHARSET): Remove.
1626 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
1627 (target_wide_charset_name): New global.
1628 (show_host_charset_name): Handle "auto".
1629 (show_target_wide_charset_name): New function.
1630 (host_charset_enum, target_charset_enum): Remove.
1631 (charset_enum): New global.
1632 (all_charsets, register_charset, lookup_charset, all_translations,
1633 register_translation, lookup_translation): Remove.
1634 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
1635 (iso_8859_print_literally, iso_8859_to_control,
1636 iso_8859_family_charset): Remove.
1637 (ebcdic_print_literally, ebcdic_to_control,
1638 ebcdic_family_charset): Remove.
1639 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
1640 register_iconv_charsets): Remove.
1641 (target_wide_charset_be_name, target_wide_charset_le_name): New
1643 (identity_either_char_to_other): Remove.
1644 (set_be_le_names, validate): New functions.
1645 (backslashable, backslashed, represented): Remove.
1646 (default_c_target_char_has_backslash_escape): Remove.
1647 (default_c_parse_backslash, iconv_convert): Remove.
1648 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
1649 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
1650 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
1651 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
1652 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
1653 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
1654 (table_convert_char, table_translation, simple_table_translation):
1656 (current_host_charset, current_target_charset,
1657 c_target_char_has_backslash_escape_func,
1658 c_target_char_has_backslash_escape_baton): Remove.
1659 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
1660 (host_char_to_target_func, host_char_to_target_baton): Remove.
1661 (target_char_to_host_func, target_char_to_host_baton): Remove.
1662 (cached_iconv_host_to_target, cached_iconv_target_to_host):
1664 (lookup_charset_or_error, check_valid_host_charset): Remove.
1665 (set_host_and_target_charsets): Remove.
1666 (set_host_charset, set_target_charset): Remove.
1667 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
1668 (set_target_wide_charset_sfunc): New function.
1669 (show_charset): Print target wide character set.
1670 (host_charset, target_charset): Rewrite.
1671 (target_wide_charset): New function.
1672 (c_target_char_has_backslash_escape): Remove.
1673 (c_parse_backslash): Remove.
1674 (host_letter_to_control_character): New function.
1675 (host_char_print_literally): Remove.
1676 (host_hex_value): New function.
1677 (target_char_to_control_char): Remove.
1678 (cleanup_iconv): New function.
1679 (convert_between_encodings): New function.
1680 (target_char_to_host): Remove.
1681 (struct wchar_iterator): Define.
1682 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1683 wchar_push_back): New functions.
1684 (do_cleanup_iterator): New function.
1685 (char_ptr): New typedef.
1686 (charsets): New global.
1687 (add_one, find_charset_names): New functions.
1688 (default_charset_names): New global.
1689 (auto_host_charset_name): Likewise.
1690 * aclocal.m4, config.in, configure: Rebuild.
1691 * configure.ac: Call AM_LANGINFO_CODESET.
1692 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
1693 (AM_ICONV): Invoke earlier.
1694 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
1695 LIBICONV_LIBDIR. Check for libiconv in build tree.
1696 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
1697 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
1698 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
1699 * gdb_obstack.h (obstack_grow_wstr): New define.
1700 * gdb_wchar.h: New file.
1701 * defs.h: Include it.
1703 2009-03-20 Tom Tromey <tromey@redhat.com>
1704 Jan Kratochvil <jan.kratochvil@redhat.com>
1706 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
1707 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
1709 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
1711 * ada-typeprint.c (print_array_type): Do the NULL check
1714 2009-03-19 Tom Tromey <tromey@redhat.com>
1716 * utils.c (do_obstack_free): New function.
1717 (make_cleanup_obstack_free): Likewise.
1718 * defs.h (make_cleanup_obstack_free): Declare.
1720 2009-03-18 Doug Evans <dje@google.com>
1722 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
1723 int, not a long long.
1724 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
1726 * expprint.c (dump_raw_expression): Print note if non-NULL.
1728 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
1731 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
1733 * Makefile.in: Update license to GPLv3.
1734 * ada-exp.y: Update license to GPLv3.
1735 * ada-lex.l: Update license to GPLv3.
1736 * c-exp.y: Update license to GPLv3.
1737 * cp-name-parser.y: Update license to GPLv3.
1738 * darwin-nat-info.c: Update license to GPLv3.
1739 * f-exp.y: Update license to GPLv3.
1740 * gdb_thread_db.h: Update license to GPLv3.
1741 * hppanbsd-nat.c: Update license to GPLv3.
1742 * hppanbsd-tdep.c: Update license to GPLv3.
1743 * hppaobsd-tdep.c: Update license to GPLv3.
1744 * jv-exp.y: Update license to GPLv3.
1745 * m2-exp.y: Update license to GPLv3.
1746 * objc-exp.y: Update license to GPLv3.
1747 * p-exp.y: Update license to GPLv3.
1748 * reply_mig_hack.awk: Update license to GPLv3.
1749 * reverse.c: Update license to GPLv3.
1750 * xtensa-xtregs.c: Update license to GPLv3.
1752 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1754 * remote.c (remote_close): Don't call generic_mourn_inferior.
1755 (remote_mourn_1): Call generic_mourn_inferior after closing the
1758 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1760 * remote.c (remote_start_remote): Add missing call to
1761 init_wait_for_inferior in non-stop mode.
1763 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1765 * breakpoint.c (bpstat_should_step): Only consider software
1766 watchpoints that have a location.
1768 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1770 Add a target_ops parameter to the to_kill method in struct target_ops.
1772 * target.h (struct target_ops): Add a "target_ops *" parameter to
1774 (target_kill): Remove macro. Add declaration.
1775 * target.c (debug_to_kill): Delete, no longer necessary.
1776 (target_kill): New function.
1777 (update_current_target): Stop inheriting the to_kill method.
1778 Do not de_fault it to no_process either.
1779 (setup_target_debug): Do not set current_target.to_kill.
1780 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
1781 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
1782 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
1785 2009-03-17 Doug Evans <dje@google.com>
1787 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
1788 glibc 2.3.2 and earlier.
1790 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1792 * frame.c (get_prev_frame_1): Do not perform the inner_frame
1793 sanity check if this_frame is not NORMAL.
1794 (frame_id_inner): Update the description of this function.
1796 2009-03-17 Hui Zhu <teawater@gmail.com>
1798 * stack.c: Change the introduce of "disassemble-next-line".
1800 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1802 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
1805 2009-03-17 Hui Zhu <teawater@gmail.com>
1807 * stack.c: Include valprint.h.
1808 (disassemble_next_line): New enum.
1809 (show_disassemble_next_line): New function. Show the current
1810 value of disassemble-next-line.
1811 (gdb_disassembly_stub_args): New struct for argument passing
1812 between function do_gdb_disassembly and function
1813 gdb_disassembly_stub.
1814 (gdb_disassembly_stub): New function. Helper for
1816 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
1817 the exception from the gdb_disassembly because it will be
1818 broken by filter sometime.
1819 (print_frame_info): If disassemble-next-line is set to auto
1820 or on and doesn't have the line debug messages for $pc,
1821 output the next instruction.
1822 If disassemble-next-line is set to on and there is line debug
1823 messages, output assembly codes for next line.
1824 (_initialize_stack): Make the "set disassemble-next-line"
1825 command an auto-boolean command. Change its class to
1826 class_stack. Place it in the top level set list. Extend help
1827 to describe the auto mode.
1829 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1831 * infrun.c (normal_stop): Don't overwrite old_chain.
1833 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1835 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
1836 which is undefined, by call to regcache_invalidate, which should
1837 do what the original author wanted to do.
1839 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1841 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
1842 (mips_create_inferior): Likewise.
1844 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1846 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
1848 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1850 * darwin-nat.c (darwin_resume): Fix a compiler warning when
1851 building on x86_64-darwin.
1853 2009-03-16 Tristan Gingold <gingold@adacore.com>
1855 * configure.tgt: Add handling for x86_64-darwin.
1857 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1859 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
1861 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1863 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
1864 Use the ops parameter to get to the target beneath, rather than
1865 using the current_target global. Using the current_target global
1866 was an unintended accident.
1868 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1870 Fix an error happening while loading symbols from a core file
1873 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
1874 to detect whether we're debugging a core file or not.
1876 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1878 Modernize the aix-thread later by getting rid of the base_target
1879 global. This brings back to life the AIX port which was otherwise
1880 crashing all the time.
1882 * aix-thread.c (base_target): Delete.
1883 (pd_enable): Do not set base_target.
1884 (aix_thread_attach): Use find_target_beneath instead of base_target.
1885 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
1886 (aix_thread_fetch_registers, aix_thread_store_registers),
1887 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
1888 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
1889 (aix_thread_kill): Delete. Does not seem necessary.
1890 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
1892 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1894 * stack.c (return_command <retval_exp>): New variables retval_expr
1895 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
1896 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
1897 if RETURN_TYPE is NULL.
1899 2009-03-14 Pedro Alves <pedro@codesourcery.com>
1901 * remote.c (PACKET_qAttached): New.
1902 (remote_query_attached): New.
1903 (remote_add_inferior): Add new `attached' argument. Handle it.
1904 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
1905 -1 to remote_add_inferior in new parameter.
1906 (extended_remote_attach_1): Adjust to pass 1 to
1907 remote_add_inferior in the new parameter.
1908 (extended_remote_create_inferior_1): Adjust to pass 0 to
1909 remote_add_inferior in the new parameter.
1910 (_initialize_remote): Add "set/show remote query-attached-packet"
1913 2009-03-13 Tom Tromey <tromey@redhat.com>
1915 * symtab.c (lookup_symbol_in_language): Use a cleanup.
1917 2009-03-13 Doug Evans <dje@google.com>
1919 * exceptions.h: Clean up some comments on catch_exceptions usage.
1920 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
1923 2009-02-17 Joel Brobecker <brobecker@adacore.com>
1925 The following patch helps getting rid of a warning inside solib-som.c.
1927 * source.c (source_full_path_of): Constify parameter filename.
1928 * defs.h (source_full_path_of): Update declaration accordingly.
1930 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1932 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
1933 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
1934 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
1936 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1938 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
1939 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
1941 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1943 * ada-tasks.c (ada_task_is_alive): Move up and make static.
1944 * ada-lang.h (ada_task_is_alive): Remove declaration.
1946 2009-03-12 Jerome Guitton <guitton@adacore.com>
1948 * ada-lang.c (ada_delta): Change the type of numerators and
1949 denominators to DOUBLEST, as they may not fit into a long.
1950 (scaling_factor): Ditto.
1952 2009-03-12 Jerome Guitton <guitton@adacore.com>
1954 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
1956 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1958 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
1959 types, if we are unable to determine the actual symbol type
1960 from its tag, then use the static approximation instead.
1962 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1964 Fix crash printing packed record with packed array.
1966 * ada-lang.c (ada_modulus_from_name): New function.
1967 (ada_modulus): In the case where the type length is bigger than
1968 the size of the type used to hold the bounds, try determining
1969 the modulus from the type name.
1970 (ada_value_primitive_packed_val): Fix bug in the computation of
1971 ntarg causing an out-of-buffer invalid access.
1973 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1975 Fix segfault when printing short_integer'last.
1977 * ada-lang.c (ada_find_any_type): Search in the primitive types
1978 if a symbol could not be found.
1980 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1982 * ada-tasks.c (task_states,long_task_states): Add new states
1983 Activating and Acceptor_Delay_Sleep. Update the description
1984 of state Acceptor_Sleep.
1986 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
1988 Fix a build failure on Darwin following some changes in
1989 the profile of some target_ops methods.
1991 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
1993 (darwin_stop_inferior, darwin_detach): Likewise.
1995 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
1997 Include token in ^running notification for CLI commands.
1999 * mi/mi-main.c (mi_execute_command): Set current_token here.
2000 (mi_cmd_execute): Do not set current_token here.
2002 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
2006 * mi/mi-main.c (mi_print_timing_maybe): New.
2007 (captured_mi_execute_command): Simplify. Output timings to
2009 (mi_execute_async_cli_command): Do not print timings.
2010 * mi/mi-main.h (mi_print_timing_maybe): Declare.
2011 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
2013 2009-03-12 Jerome Guitton <guitton@adacore.com>
2015 * xcoffread.c (process_linenos): Check if the line in the
2016 include table refers to the main source file and, if so,
2017 add them to the main subfile.
2019 2009-03-12 Joel Brobecker <brobecker@adacore.com>
2021 Fix a build failure on AIX introduced after a change in the profile
2022 of some of the "methods" in the target_ops structure.
2023 * aix-thread.c: Add missing target_ops parameter throughout.
2025 Implement Ada task switching on AIX.
2026 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
2027 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
2029 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
2031 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
2032 value_mark and value_free_to_mark.
2033 * objfiles.c (free_objfile): Call objfile_free_data before
2036 2009-03-10 Hui Zhu <teawater@gmail.com>
2038 * disasm.c (gdb_disassembly): Remove unused argument
2040 * disasm.h (gdb_disassembly): Ditto.
2041 * cli/cli-cmds.c (print_disassembly): Ditto.
2042 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
2044 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
2046 * solib.c (solib_contains_address_p): New function.
2047 (solib_name_from_address): Use it.
2048 * printcmd.c (display_uses_solib_p): Use it.
2049 * solib.h (solib_contains_address_p): Declare it.
2051 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2053 * varobj.c (free_variable): Call value_free.
2055 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2058 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
2059 Move the variable `macinfo_type' out of the loop. Create a new
2060 processing pass before the current one to pre-create `current_file'.
2061 New complaint on misplaced zero/non-zero definitions/includes.
2062 Skip first DW_MACINFO_start_file with `at_commandline' set.
2064 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
2066 * solib.c (reload_shared_libraries): Give
2067 inferior a chance to reset solib breakpoint.
2070 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
2072 * windows-nat.c (dr): Redefine to use largest possible integer which
2074 (cygwin_set_dr): Avoid coercion.
2076 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
2078 * windows-nat.c (windows_create_inferior): Implement --tty handling on
2081 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
2083 Rename solib_address to solib_name_from_address.
2084 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
2085 (disable_breakpoints_in_unloaded_shlib): Update.
2086 * printcmd.c (display_uses_solib_p): Likewise.
2087 * stack.c (print_frame): Likewise.
2091 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
2093 * printcmd.c (do_one_display): Reparse exp_string.
2094 (display_uses_solib_p): New function.
2095 (clear_dangling_display_expressions): New function.
2096 (_initialize_printcmd): Add observer.
2097 * solib.c (no_shared_libraries): Swap order of calls to
2098 clear_solib and objfile_purge_solibs.
2100 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2102 Implement the target-specific part of Ada tasking support
2105 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
2106 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
2108 2009-03-05 Joel Brobecker <brobecker@adacore.com>
2110 Get rid of the global "base_target" and use "find_target_beneath"
2111 to find the underlying target.
2112 * dec-thread.c (base_target): Delete.
2113 (enable_dec_thread): Remove assignement to base_target.
2114 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
2115 (dec_thread_fetch_registers, dec_thread_store_registers)
2116 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
2117 Update the function profile if necessary.
2118 Use find_target_beneath to call the same method but from
2119 the underlying target, removing the need for "base_target".
2121 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
2122 Fix a copy/paste error in a few debug traces...
2124 * solib-osf.c (init_so): Use a simpler method for computing
2125 the size of lm_info structure. This also gets rid of warning
2126 emitted by the compiler.
2128 2009-03-05 Pedro Alves <pedro@codesourcery.com>
2130 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
2131 duplicates of permanent breakpoints.
2133 2009-03-04 Pedro Alves <pedro@codesourcery.com>
2135 * inferior.h (notice_new_inferior): Declare.
2136 * infcmd.c (notice_new_inferior): New.
2137 * remote.c (remote_add_inferior, remote_add_thread): New.
2138 (notice_new_inferiors): Rename to...
2139 (remote_notice_new_inferior): ... this. Add RUNNING argument.
2140 Use remote_add_thread instead of add_thread, passing it the
2141 RUNNING argument. Add an inferior with remote_add_inferior. If
2142 we just learned about an inferior, call notice_new_inferior.
2143 (record_currthread): Adjust.
2144 (remote_threads_info): Adjust to use remote_notice_new_inferior.
2145 (remote_start_remote, extended_remote_attach_1): Use
2146 remote_add_inferior.
2147 (process_stop_reply): Adjust. Call remote_notice_new_inferior
2148 after handling expedited registers and watchpoint state.
2149 (extended_remote_create_inferior_1): Use remote_add_inferior.
2151 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
2153 * infcmd.c (registers_info): Remove register number case.
2155 2009-03-03 Pedro Alves <pedro@codesourcery.com>
2157 * top.c (quit_target): Check for target_has_execution before
2158 killing or detaching from inferiors.
2160 2009-03-02 Joel Brobecker <brobecker@adacore.com>
2162 Remove some unused routines.
2164 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
2166 * ada-lang.c (ada_task_list_iterator_ftype)
2167 (iterate_over_live_ada_tasks): Delete.
2168 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
2171 2009-03-01 Doug Evans <dje@google.com>
2173 * symtab.c: Remove trailing whitespace throughout the file.
2174 (expand_line_sal): Fix some typos and whitespace.
2176 * Makefile.in (clean): rm -f $(DEPDIR)/*.
2178 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
2179 (init.c): signals/ -> common/.
2180 (signals.o): Update.
2181 * target.h (target_signal_to_string,target_signal_to_string)
2182 (target_signal_from_name,target_signal_to_host_p)
2183 (target_signal_from_host,target_signal_to_host): Move to ...
2184 * common/gdb_signals.h: ... here. New file.
2185 * common/signals.c: Moved here from signals/signals.c.
2186 #include gdb_signals.h, remove #include of target.h in gdb case.
2187 (target_signal_from_command,default_target_signal_to_host)
2188 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
2190 Include thread ID in target_wait debugging output.
2191 * infrun.c (print_target_wait_results): New function.
2192 (wait_for_inferior,fetch_inferior_event): Call it.
2194 2009-02-27 Pedro Alves <pedro@codesourcery.com>
2196 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
2197 with a ptid_t field.
2198 * linux-thread-db.c (thread_get_info_callback): Build the ptid
2199 using the pid stored in proc_handle.ptid.
2200 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
2201 (check_for_thread_db, thread_db_detach, check_event)
2202 (thread_db_mourn_inferior, find_new_threads_callback)
2203 (thread_db_find_new_threads_1): Adjust.
2204 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
2205 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
2207 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
2209 * valprint.c (read_string): Rework clean-up logic. Use
2210 free_current_contents to clean-up buffer.
2212 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
2214 * MAINTAINERS: Update e-mail address.
2216 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
2218 * python/python-utils.c (python_string_to_unicode): Always return
2220 (python_string_to_target_string): Decrement transient python
2222 (python_string_to_host_string): Likewise.
2224 2007-02-26 Pedro Alves <pedro@codesourcery.com>
2226 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
2227 call to super_fetch_registers.
2228 (mips64_linux_store_registers): Pass `ops' to call to
2229 super_store_registers.
2231 2009-02-25 Doug Evans <dje@google.com>
2233 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
2236 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
2237 disabled_shlib_breaks, unused.
2239 * printcmd.c (build_address_symbolic): Fix comment.
2241 2009-02-25 Hui Zhu <teawater@gmail.com>
2243 * cli/cli-script.c (define_command): Add _() to query.
2244 * gnu-nat.c (inf_validate_task_sc): Ditto.
2245 * infcmd.c (kill_if_already_running): Ditto.
2246 (jump_command): Ditto.
2247 (attach_command): Ditto.
2248 * inflow.c (kill_command): Ditto.
2249 * infrun.c (handle_command): Ditto.
2250 * maint.c (maintenance_dump_me): Ditto.
2251 * memattr.c (mem_delete_command): Ditto.
2252 * monitor.c (monitor_interrupt_query): Ditto.
2253 * nto-procfs.c (interrupt_query): Ditto.
2254 * printcmd.c (undisplay_command): Ditto.
2255 * remote-mips.c (mips_kill): Ditto.
2256 * remote.c (interrupt_query): Ditto.
2257 * solib-irix.c (irix_open_symbol_file_object): Ditto.
2258 * solib-osf.c (osf_open_symbol_file_object): Ditto.
2259 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
2260 * solib-som.c (som_open_symbol_file_object): Ditto.
2261 * solib-svr4.c (open_symbol_file_object): Ditto.
2262 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
2263 * target.c (kill_or_be_killed): Ditto.
2264 * tracepoint.c (delete_trace_command): Ditto.
2265 * top.c (quit_confirm): Add _() to s that will be used
2268 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
2270 Fix windows-nat.c compilation failure.
2272 * windows-nat.c (windows_thread_alive): Fix forward declaration.
2273 (get_windows_debug_event): Add ops parameter to call to windows_resume.
2275 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2277 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
2279 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
2281 * symtab.c (find_line_symtab): Initialize exact to avoid
2284 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2286 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
2287 `ops' to recursive call.
2289 2009-02-23 Pedro Alves <pedro@codesourcery.com>
2291 * corelow.c (get_core_registers): Adjust.
2292 (core_file_thread_alive): Rename to...
2293 (core_thread_alive): ... this.
2294 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
2295 (init_core_ops): Adjust.
2296 (coreops_suppress_target): Delete.
2297 (_initialize_corelow): Unconditionally add core_ops.
2298 * procfs.c: Include "inf-child.h".
2299 (procfs_ops): Delete.
2300 (init_procfs_ops): Delete. Reimplement as...
2301 (procfs_target): ... this, inheriting from inf-child.
2302 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
2303 (procfs_prepare_to_store): Delete.
2304 (procfs_store_registers, procfs_resume): Adjust.
2305 (procfs_open): Delete.
2306 (procfs_suppress_run): Delete.
2307 (procfs_can_run): Delete.
2308 (procfs_mourn_inferior): Adjust.
2309 (procfs_init_inferior): Add target_ops parameter. Adjust.
2310 (procfs_create_inferior): Don't pass procfs_init_inferior to
2311 fork_inferior. Instead call it after fork_inferior returns.
2312 (procfs_find_new_threads): Adjust.
2313 (_initialize_procfs): Adjust to use procfs_target instead of
2315 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
2316 (lwp_to_thread): Use target_thread_alive.
2317 (sol_thread_open): Delete.
2318 (sol_thread_attach): Delete.
2319 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
2320 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
2321 to use find_target_beneath.
2322 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
2323 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
2324 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
2325 (check_for_thread_db): New.
2326 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
2327 (sol_thread_new_objfile): Call check_for_thread_db.
2328 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
2329 (sol_thread_can_run): Delete.
2330 (sol_thread_alive): Adjust to use find_target_beneath.
2331 (sol_thread_stop): Delete.
2332 (rw_common): Use target_write_memory or target_read_memory.
2333 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
2334 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
2335 (solaris_pid_to_str): Remove check for libthread_db initialization
2337 (sol_find_new_threads): Remove check for libthread_db
2338 initialization failing, or for an invalid inferior_ptid. Adjust
2339 to use find_target_beneath.
2340 (sol_core_open, sol_core_close, sol_core_detach,
2341 sol_core_files_info, sol_find_memory_regions,
2342 sol_make_note_section, ignore): Delete.
2343 (init_sol_thread_ops): Make it a thread_stratum target. Remove
2344 unneeded callback settings.
2345 (init_sol_core_ops): Delete.
2346 (_initialize_sol_thread): No longer call init_sol_core_ops, set
2347 procfs_suppress_run, or hack with core_ops.
2349 * target.h (struct target_ops): Add a target_ops * parameter to
2350 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
2351 and to_find_new_threads.
2352 (target_fetch_registers, target_store_registers)
2353 (target_thread_alive, target_find_new_threads): Redeclare as
2356 * target.c (update_current_target): Do not inherit or de_fault
2357 to_resume, to_fetch_registers, to_store_registers,
2358 to_thread_alive, to_find_new_threads.
2359 (target_resume): Adjust.
2360 (target_thread_alive, target_find_new_threads): New.
2361 (debug_to_resume, debug_to_fetch_registers): Delete.
2362 (target_fetch_registers): New.
2363 (debug_to_store_registers): Delete.
2364 (target_store_registers): New.
2365 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
2366 (setup_target_debug): Adjust.
2368 * gdbcore.h (core_ops): Delete declaration.
2370 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
2371 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
2372 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
2373 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
2374 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
2375 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
2376 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
2377 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
2378 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
2379 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
2380 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
2381 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
2382 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
2383 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
2385 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
2386 * gdbarch.h, gdbarch.c: Regenerate.
2388 * sol2-tdep.c: Include "inferior.h".
2389 (sol2_core_pid_to_str): New.
2390 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
2392 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2393 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2394 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2395 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2397 2009-02-22 Doug Evans <dje@google.com>
2399 * exec.c (exec_file_attach): Fix comment.
2401 2009-02-22 Pedro Alves <pedro@codesourcery.com>
2403 Silence a few -Wmissing-prototypes warnings.
2406 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
2408 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
2409 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
2410 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
2411 (_initialize_amd64nbsd_tdep): ... this.
2412 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
2413 (_initialize_arm_linux_tdep): Declare.
2414 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
2415 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
2416 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
2417 * avr-tdep.c (avr_return_value): Make it static.
2418 (avr_frame_unwind_cache): Ditto.
2419 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
2420 (bsd_uthread_solib_loaded): Ditto.
2421 (bsd_uthread_solib_unloaded): Ditto.
2422 (bsd_uthread_target): Ditto.
2423 (_initialize_bsd_uthread): Declare.
2424 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
2425 (cris_frame_unwind_cache): Ditto.
2426 * frv-tdep.c (frv_return_value): Ditto.
2427 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
2428 (h8300h_use_struct_convention): Ditto.
2429 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
2431 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
2433 * hppabsd-tdep.c: Include hppabsd-tdep.h.
2434 (hppabsd_find_global_pointer): Make it static.
2435 * hppabsd-tdep.h: New.
2436 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
2437 (hppabsd_init_abi): Remove declaration.
2438 (_initialize_hppabsd_tdep): Remove declaration.
2439 (_initialize_hppanbsd_tdep): Declare.
2440 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
2441 (hppabsd_init_abi): Delete declaration.
2442 (hppaobsd_init_abi): Make it static.
2443 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
2444 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
2445 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
2446 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
2447 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
2448 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
2449 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
2450 (_initialize_m32c_tdep): Declare.
2451 * m32r-rom.c (_initialize_m32r_rom): Declare.
2452 * m32r-tdep.c (m32r_skip_prologue): Make it static.
2453 (m32r_return_value): Ditto.
2454 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
2455 (m68hc11_return_value): Ditto.
2456 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
2457 * m88k-tdep.c (m88k_frame_cache): Make it static.
2458 * mep-tdep.c (mep_gdb_print_insn): Ditto.
2459 (mep_return_value): Ditto.
2460 (_initialize_mep_tdep): Declare.
2461 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
2462 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
2463 (mips_linux_syscall_next_pc): Ditto.
2464 (_initialize_mips_linux_tdep): Declare.
2465 * mips-tdep.c (mips_single_step_through_delay): Make it static.
2466 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
2467 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
2468 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
2469 * mt-tdep.c (_initialize_mt_tdep): Declare.
2470 * nbsd-tdep.c: Include nbsd-tdep.h.
2471 * nto-tdep.c (find_load_phdr): Make it static.
2472 (_initialize_nto_tdep): Declare.
2473 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
2475 (_initialize_ppc_linux_tdep): Declare.
2476 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
2477 (m32r_insert_watchpoint, m32r_remove_watchpoint)
2478 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
2480 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
2481 * rs6000-nat.c: Include xcoffread.h.
2482 (find_toc_address): Don't extern declare get_toc_offset. Adjust
2483 to call xcoff_get_to_offset.
2484 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
2485 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
2486 (rs6000_skip_trampoline_code): Make static.
2487 * s390-tdep.c (s390_regset_from_core_section): Ditto.
2488 * sh-tdep.c (sh_register_reggroup_p): Ditto.
2489 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
2490 (_initialize_shnbsd_tdep): Declare.
2491 * solib-frv.c (displacement_from_map): Make static.
2492 (_initialize_frv_solib): Declare.
2493 * solib-irix.c (fetch_lm_info): Make static.
2494 (_initialize_irix_solib): Declare.
2495 * solib-som.c: Include solib-som.h.
2496 (som_solib_select): Line break.
2497 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
2498 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
2499 (_initialize_sparcnbsd_tdep): ... this.
2500 * spu-tdep.c (spu_software_single_step): Make it static.
2501 (_initialize_spu_tdep): Declare.
2502 * vax-tdep.c (vax_frame_cache): Make it static.
2503 * xcoffread.c: Include xcoffread.h.
2504 (get_toc_offset): Rename to ...
2505 (xcoff_get_toc_offset): ... this.
2506 (_initialize_xcoffread): Declare.
2508 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
2509 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
2511 (_initialize_xtensa_tdep): Declare.
2513 2008-02-21 Pedro Alves <pedro@codesorcery.com>
2515 Silence a few -Wmissing-prototypes warnings.
2518 * amd64-nat.c: Include "amd64-nat.h".
2519 * fork-child.c (_initialize_fork_child): Ditto.
2520 * gcore.c (_initialize_gcore): Ditto.
2521 * inf-ptrace.c: Include "inf-ptrace.h".
2522 (inf_ptrace_store_registers): Make it static.
2523 * linux-nat.c (linux_nat_terminal_ours): Make it static.
2524 (_initialize_linux_nat): Declare before definition.
2525 * linux-tdep.c: Include "linux-tdep.h".
2526 * linux-thread-db.c (_initialize_thread_db): Declare before
2528 * proc-service.c (_initialize_proc_service): Ditto.
2529 * remote.c (remote_send_printf): Make it static.
2530 * solib.c: Include "solib.h".
2531 * symfile-mem.c (_initialize_symfile_mem): Declare before
2533 * ada-lang.c (ada_la_decode, ada_match_name)
2534 (ada_suppress_symbol_printing, ada_is_array_type)
2535 (ada_value_ptr_subscript, ada_array_length)
2536 (ada_to_static_fixed_value): Make them static.
2537 (_initialize_ada_language): Declare before definition.
2538 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
2539 (ada_task_list_changed, ada_new_objfile_observer): Make them
2541 (_initialize_tasks): Declare before definition.
2542 * addrmap.c (_initialize_addrmap): Declare before definition.
2543 * auxv.c (default_auxv_parse): Make it static.
2544 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
2546 * breakpoint.c (remove_sal): Add line break.
2547 (expand_line_sal_maybe): Make it static.
2548 * cp-name-parser.y: Include "cp-support.h".
2549 * cp-valprint.c (cp_find_class_member): Make it static.
2550 * eval.c (value_f90_subarray): Ditto.
2551 * exceptions.c (print_any_exception): Ditto.
2552 * findcmd.c (_initialize_mem_search): Declare before definition.
2553 * frame.c (frame_observer_target_changed): Make it static.
2554 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
2555 * inf-child.c: Include "inf-child.h".
2556 * inferior.h (valid_inferior_id): Rename to ...
2557 (valid_gdb_inferior_id): ... this.
2558 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
2560 * jv-lang.c (java_language_arch_info): Make it static.
2561 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
2562 * osdata.c (info_osdata_command): Make it static.
2563 * regcache.c (regcache_observer_target_changed): Make it static.
2564 * reverse.c (_initialize_reverse): Declare before definition.
2565 * stabsread.c (cleanup_undefined_types_noname)
2566 (cleanup_undefined_types_1): Make them static.
2567 * symfile.c (place_section): Make it static.
2568 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
2569 * target-descriptions.c (_initialize_target_descriptions): Declare
2571 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
2572 (find_default_is_async_p, find_default_supports_non_stop): Make
2574 (target_supports_non_stop): Add prototype.
2575 (dummy_pid_to_str): Make it static.
2576 * utils.c (_initialize_utils): Declare before definition.
2577 * ada-exp.y (_initialize_ada_exp): Declare before definition.
2578 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
2579 * target.h (struct target_ops): Add a prototype to the
2580 to_can_execute_reverse callback.
2581 * macroscope.c (_initialize_macroscope): Declare before definition.
2582 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
2583 * python/python.c (_initialize_python): Declare before definition.
2584 * tui/tui-command.c: Include "tui/tui-command.h".
2585 * tui/tui-data.c (init_content_element, init_win_info): Make them
2587 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
2588 * tui/tui-interp.c (_initialize_tui_interp): Declare before
2590 * tui/tui-layout.c: Include "tui/tui-layout.h".
2591 (_initialize_tui_layout): Declare before definition.
2592 * tui/tui-regs.c: Include "tui/tui-regs.h".
2593 (tui_display_reg_element_at_line): Make it static.
2594 (_initialize_tui_regs): Declare before definition.
2595 * tui/tui-stack.c (_initialize_tui_stack): Declare before
2597 * tui/tui-win.c: Include "tui/tui-win.h".
2598 (_initialize_tui_win): Declare before definition.
2599 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
2600 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
2601 (tui_get_cmd_list): Add a prototype.
2602 * tui/tui-windata.c: Include tui-windata.h.
2603 * tui/tui-wingeneral.c (box_win): Make it static.
2604 * cli/cli-logging.c (show_logging_command): Make it static.
2605 (_initialize_cli_logging): Declare before definition.
2606 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
2609 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
2611 Extend use of i386_use_watchpoints to all i386 native files
2612 using hardware watchpoints.
2613 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
2614 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
2615 * windows-nat.c (init_windows_ops): Ditto.
2616 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
2617 * config/i386/nm-cygwin64.h: Ditto.
2618 * config/i386/nm-fbsd.h: Ditto.
2619 * config/i386/nm-go32.h: Ditto.
2621 2009-02-19 Joel Brobecker <brobecker@adacore.com>
2623 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
2625 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
2627 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
2628 (mi_interpreter_init): Register the above.
2629 * solib.c (clear_solib): Notify solib unload.
2630 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
2631 disable breakpoints on a.out targets.
2633 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
2635 * observer.c (observer_test_first_notification_function)
2636 (observer_test_second_notification_function)
2637 (observer_test_third_notification_function): Adjust prototype.
2639 2009-02-17 Pedro Alves <pedro@codesourcery.com>
2641 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
2642 (ALL_TARGET_OBS): Add dicos-tdep.o.
2643 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
2644 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
2646 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
2648 * dicos-tdep.h, dicos-tdep.c: New.
2649 * amd64-dicos-tdep.c: New.
2650 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
2651 inferior.h. Include dicos-tdep.h.
2652 (i386_dicos_init_abi): Call dicos_init_abi.
2653 (i386_dicos_bfd_has_symbol_p): Delete.
2654 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
2656 * NEWS: Mention x86-64 DICOS target support.
2658 2009-02-16 Doug Evans <dje@google.com>
2660 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
2661 All callers updated.
2662 (amd64_get_insn_details): Handle more 3-byte opcode insns.
2663 (amd64_breakpoint_p): Delete.
2664 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
2665 don't back up pc to the start of the int3.
2666 * i386-tdep.c: #include opcode/i386.h.
2667 (i386_skip_prefixes): New function.
2668 (i386_absolute_jmp_p): Constify argument.
2669 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
2670 (i386_breakpoint_p): Delete.
2671 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
2672 When fixing up after stepping an int3, don't back up pc to the start
2675 2009-02-16 Pedro Alves <pedro@codesourcery.com>
2677 * corelow.c (core_close): Don't hardcode the core's pid.
2678 (core_open): Find core threads before calling
2679 post_create_inferior.
2680 (add_to_thread_list, get_core_register_section): Take into account
2681 systems where the regset section names encode the pid of the
2684 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
2685 * gdbarch.h, gdbarch.c: Regenerate.
2687 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2688 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2689 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2690 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2692 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
2694 Include frame information for *stopped due to CLI commands.
2696 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
2697 * infcmd.c (finish_command_continuation): Pass '1' for
2698 'print_frame' parameter to the observer.
2699 * infrun.c (normal_stop): Don't print mi-specific information
2700 here. Pass 'stop_print_frame' to the 'print_frame' parameter
2702 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
2703 If we need to print frame, and current uiout is not the MI one,
2706 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
2708 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
2709 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
2711 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2714 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
2715 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
2717 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
2719 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
2720 for DW_ATE_signed_char and DW_ATE_unsigned_char
2721 for pascal language.
2723 2009-02-11 Jim Meyering <meyering@redhat.com>
2724 Jan Kratochvil <jan.kratochvil@redhat.com>
2726 Avoid NULL dereference.
2727 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
2728 New variable func_type.
2730 2009-02-11 Pedro Alves <pedro@codesourcery.com>
2732 * gdbarch.c: Regenerate.
2734 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
2736 * p-lang.c (is_pascal_string_type): Fix comment.
2737 Determine exact size of char elements for GPC
2739 (pascal_printstr): Handle char width of 2 or 4.
2740 * p-valprint.c (pascal_val_print): Handle char
2743 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
2745 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
2746 inside the loop. Only call addrmap_set_empty if the compilation unit
2747 had DW_AT_high_pc and DW_AT_low_pc. Update call to
2748 scan_partial_symbols.
2749 (scan_partial_symbols): Take NEED_PC argument and pass it along with
2751 (add_partial_namespace): Take NEED_PC argument and pass it through.
2752 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
2755 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2757 * NEWS: Mention inspecting extra signal information, $_siginfo,
2758 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
2760 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2762 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
2765 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2767 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
2768 (compat_timer_t, compat_clock_t, struct compat_timeval)
2769 (compat_sigval_t, compat_siginfo_t): New types.
2770 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
2771 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
2772 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
2773 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
2774 (amd64_linux_siginfo_fixup): New.
2775 * linux-nat.c (linux_nat_siginfo_fixup): New.
2776 (siginfo_fixup): New.
2777 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
2778 siginfo layout expected by ptrace and the siginfo layout of the
2780 (linux_nat_set_siginfo_fixup): New.
2781 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
2783 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2785 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
2786 * infrun.c (siginfo_value_read, siginfo_value_write): New.
2787 (siginfo_value_funcs): New.
2788 (siginfo_make_value): New.
2789 (_initialize_infrun): Create the $_siginfo convenience variable.
2790 * gdbtypes.h (append_composite_type_field_aligned): Declare.
2791 * gdbtypes.c (append_composite_type_field): Rename to...
2792 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
2793 argument. Handle it.
2794 (append_composite_type_field): Rewrite on top of
2795 append_composite_type_field_aligned.
2796 * value.h (internalvar_make_value): New typedef.
2797 (struct internalvar) <make_value>: New field.
2798 (create_internalvar_type_lazy): Declare.
2799 * value.c (create_internalvar): Clear make_value.
2800 (create_internalvar_type_lazy): New.
2801 (value_of_internalvar): If make_value is set use it.
2802 (preserve_values): Skip internal variables that don't have a
2804 * gdbarch.sh (get_siginfo_type): New.
2805 * gdbarch.h, gdbarch.c: Regenerate.
2807 * linux-tdep.h, linux-tdep.c: New.
2808 * amd64-linux-tdep.c: Include "linux-tdep.h".
2809 (amd64_linux_init_abi): Register linux_get_siginfo_type and
2810 linux_get_siginfo_mapper.
2811 * i386-linux-tdep.c: Include "linux-tdep.h".
2812 (i386_linux_init_abi): Register linux_get_siginfo_type and
2813 linux_get_siginfo_mapper.
2814 * arm-linux-tdep.c: Include "linux-tdep.h".
2815 (i386_linux_init_abi): Register linux_get_siginfo_type and
2816 linux_get_siginfo_mapper.
2818 * linux-nat.c (linux_xfer_siginfo): New.
2819 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2820 * remote.c (PACKET_qXfer_siginfo_read)
2821 (PACKET_qXfer_siginfo_write): New.
2822 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
2823 "qXfer:siginfo:write" features.
2824 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2825 (_initialize_remote): Add "set/show remote read-siginfo-object"
2826 and "set/show remote write-siginfo-object" commands.
2828 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
2829 (HFILES_NO_SRCDIR): Add linux-tdep.h.
2830 (ALLDEPFILES): Add linux-tdep.c.
2832 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
2833 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
2836 2009-02-06 Jim Blandy <jimb@codesourcery.com>
2837 Daniel Jacobowitz <dan@codesourcery.com>
2838 Vladimir Prus <vladimir@codesourcery.com>
2839 Pedro Alves <pedro@codesourcery.com>
2841 * defs.h (enum lval_type): New value: lval_computed.
2842 * value.h (struct lval_funcs): New type.
2843 (allocate_computed_value, value_computed_funcs)
2844 (value_computed_closure): New declarations.
2845 * value.c (struct value): Add a structure to the location union
2846 for computed lvalues, containing 'funcs' and 'closure' members.
2847 (allocate_computed_value, value_computed_funcs)
2848 (value_computed_closure): New functions.
2849 (value_free): For computed lvalues, call the closure's
2850 'free_closure' function before freeing the value itself.
2851 (value_copy): If we're copying an lval_computed value, call the
2852 closure's 'copy_closure' function.
2853 (set_value_component_location): If the original value is a
2854 computed lvalue, then call the closure's 'copy_closure' function.
2855 (value_of_internalvar): If an internal variable's value is a
2856 computed lvalue, make retrieving its value produce an equivalent
2858 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
2859 their read function.
2860 (value_assign): Assign to computed lvalues by calling their write
2863 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2865 * linux-nat.c (linux_nat_wait): Adjust.
2866 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
2867 * linux-nat.h (thread_db_init): Delete declaration.
2868 * linux-thread-db.c (target_beneath): Delete.
2869 (thread_db_init): Delete.
2870 (thread_db_detach): Use find_target_beneath.
2871 (thread_db_wait): Adjust interface. Use find_target_beneath.
2872 (thread_db_mourn_inferior): Use find_target_beneath.
2873 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
2874 (thread_db_async_mask): Delete.
2875 (thread_db_pid_to_str): Adjust interface. Use
2876 find_target_beneath.
2877 (thread_db_get_thread_local_address): Adjust interface. Use
2878 find_target_beneath.
2879 (init_thread_db_ops): Delete references to delete functions.
2880 * target.c (update_current_target): Don't inherit or default
2881 to_wait. Don't inherit to_pid_to_str and
2882 to_get_thread_local_address.
2883 (target_translate_tls_address): Look for a pushed target that
2884 implements to_get_thread_local_address, and use it instead of
2885 checking for target_get_thread_local_address_p.
2886 (target_wait, target_pid_to_str): Reimplement as functions.
2887 (dummy_pid_to_str): New.
2888 (init_dummy_target): Register it.
2889 (debug_to_wait): Delete.
2890 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
2891 to_get_thread_local_address accept a pointer to struct target_ops.
2892 (target_wait): Delete macro, and declare as function.
2893 (target_pid_to_str): Likewise.
2894 (target_get_thread_local_address)
2895 (target_get_thread_local_address_p): Delete.
2896 (noprocess): Add NORETURN and ATTR_NORETURN tags.
2897 * inf-ptrace.c (inf_ptrace_wait): Adjust.
2898 (inf_ptrace_pid_to_str): New.
2899 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
2900 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
2901 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
2902 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
2904 * corelow.c (core_pid_to_str): Adjust.
2905 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
2906 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
2907 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
2908 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
2909 * hpux-thread.c (hpux_thread_wait): Adjust.
2910 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
2911 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
2912 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
2913 * procfs.c (procfs_pid_to_str): Adjust.
2914 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
2915 * remote-mips.c (mips_wait): Adjust.
2916 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
2917 * remote.c (remote_wait, remote_pid_to_str)
2918 (remote_get_thread_local_address): Adjust.
2919 * rs6000-nat.c (rs6000_wait): Adjust.
2920 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
2921 (sol_thread_wait, solaris_pid_to_str): Adjust.
2922 * spu-linux-nat.c (spu_child_wait): Adjust.
2923 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2925 2009-02-06 Tom Tromey <tromey@redhat.com>
2927 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
2928 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
2929 (python-cmd.o): New target.
2930 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
2931 completer prototype.
2932 (add_cmd): Initialize destroyer member of cmd_list_element. Use
2933 make_symbol_completion_list_fn as completer.
2934 (delete_cmd): Call destroyer if one is set.
2935 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
2936 completer member. Add destroyer member.
2937 (set_cmd_completer): Add self parameter to
2938 completer prototype.
2939 * command.h (set_cmd_completer): Add cmd parameter to
2940 completer prototype.
2941 * completer.c (noop_completer, filename_completer,
2942 location_completer, expression_completer, command_completer): Adapt
2943 to new completer prototype.
2944 (complete_line_internal): Pass new parameter to completer function.
2945 * completer.h (noop_completer, filename_completer,
2946 location_completer, expression_completer, command_completer): Adapt
2947 prototypes to new completer prototype.
2948 * interps.c (interpreter_completer): Adapt to new completer
2950 * python/python-cmd.c: New file.
2951 * python/python-internal.h (gdbpy_initialize_commands): Add
2953 (gdbpy_doc_cst): Add forward declaration.
2954 * python/python.c (gdbpy_doc_cst): Declare.
2955 (_initialize_python): Call gdbpy_initialize_commands. Initialize
2957 * symtab.c (make_symbol_completion_list_fn): New function.
2958 * symtab.h (make_symbol_completion_list_fn): Add prototype.
2960 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2962 * target.c (target_get_osdata): Check for equal or higher than
2963 process_stratum, not dummy_stratum.
2965 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2967 * remote.c (extended_remote_can_run): Delete.
2968 (init_remote_ops): Don't register it.
2969 * target.c (target_get_osdata): Don't check for target_can_run.
2970 Instead any target that has already been pushed, otherwise
2971 fallback to the default run target.
2973 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2975 * target.c (target_create_inferior, target_detach)
2976 (target_mourn_inferior, target_attach, target_close): Do target
2978 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
2979 (debug_to_mourn_inferior, debug_to_close): Delete.
2980 (setup_target_debug): Adjust.
2982 2009-02-05 Pedro Alves <pedro@codesourcery.com>
2984 * target.h (target_stopped_data_address_p): Delete declaration,
2985 and don't define as macro.
2986 * target.c (target_stopped_data_address_p): Delete.
2988 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
2989 Tom Tromey <tromey@redhat.com>
2991 * python/python-utils.c (target_string_to_unicode): New function.
2992 * python/python-internal.h (target_string_to_unicode): New prototype.
2993 * python/python-value.c (valpy_string): New function.
2994 (value_object_methods): Add `string' entry.
2996 2009-02-05 Pedro Alves <pedro@codesourcery.com>
2998 * target.h (target_tid_to_str): Delete.
2999 * thread.c (print_thread_info, thread_apply_all_command)
3000 (thread_apply_command, thread_command, do_captured_thread_select):
3001 Use target_pid_to_str instead of target_tid_to_str.
3002 * linux-fork.c (delete_fork_command): Likewise.
3004 2009-02-05 Pedro Alves <pedro@codesourcery.com>
3006 * frame.c (has_stack_frames): Make public.
3007 (get_prev_frame): Don't allow a NULL this_frame anymore.
3008 * frame.h (has_stack_frames): Declare.
3009 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
3010 to get_prev_frame, instead start at get_current_frame.
3011 (varobj_create): Check has_stack_frames before getting any frame;
3012 eliminate one usage of deprecated_safe_get_selected_frame.
3014 2009-02-05 Tom Tromey <tromey@redhat.com>
3015 Thiago Jung Bauermann <bauerman@br.ibm.com>
3017 * python/python.c (GdbMethods): Move to bottom of file.
3018 (get_parameter, execute_gdb_command, gdbpy_write,
3019 gdbpy_flush): Remove forward declarations.
3020 (eval_python_from_control_command): Fix error checking of function
3021 PyRun_SimpleString. Fix error string.
3022 (python_command): Likewise.
3023 (execute_gdb_command): Added from_tty argument.
3025 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
3027 * language.h (language_dfn): Add la_get_string member.
3028 (LA_GET_STRING): New macro.
3029 (default_get_string): New prototype.
3030 * language.c (default_get_string): New function.
3031 (unknown_language_defn, auto_language_defn, local_language_defn): Use
3032 default_get_string for la_get_string.
3033 * c-lang.c (c_get_string): New function.
3034 (c_language_defn, cplus_language_defn, asm_language_defn): Use
3035 c_get_string for la_get_string.
3036 (minimal_language_defn): Likewise
3037 * ada-lang.c (ada_language_defn): Likewise.
3038 * f-lang.c (f_language_defn): Use default_get_string for
3040 * jv-lang.c (java_language_defn): Likewise.
3041 * m2-lang.c (m2_language_defn): Likewise.
3042 * objc-lang.c (objc_language_defn): Likewise.
3043 * p-lang.c (p_language_defn): Likewise.
3044 * scm-lang.c (scm_language_defn): Likewise.
3045 * typeprint.c (type_to_string): New function.
3046 * value.h (type_to_string): New prototype.
3047 * valprint.c (val_print_string): Factor out code for reading string
3048 from the inferior into its own function. Put 2 spaces after period
3050 (read_string): New function.
3051 * valprint.h (read_string): New prototype.
3053 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
3054 Tom Tromey <tromey@redhat.com>
3056 PR breakpoints/8079:
3057 * breakpoint.c (print_one_breakpoint): Use exp_string field
3058 to display expression of watchpoints.
3059 (mention): Likewise.
3060 (watch_command_1): Remove trailing whitespace from expression.
3061 * printcmd.c (struct display) <exp_string>: New field.
3062 (display_command): Set exp_string.
3063 (free_display): Free exp_string.
3064 (clear_displays): Use free_display.
3065 (do_one_display): Print exp_string.
3066 (display_info): Likewise.
3068 2009-02-04 Tom Tromey <tromey@redhat.com>
3069 Thiago Jung Bauermann <bauerman@br.ibm.com>
3070 Phil Muldoon <pmuldoon@redhat.com>
3072 * python/python-internal.h (gdbpy_get_value_from_history): Rename
3073 prototype to gdbpy_history.
3074 (gdbpy_is_string): Declare.
3075 (python_string_to_host_string): Declare.
3076 * python/python-utils.c (gdbpy_is_string): New function.
3077 (unicode_to_encoded_string): New function.
3078 (unicode_to_target_string): Use it.
3079 (python_string_to_host_string): New function.
3080 * python/python-value.c (valpy_address): New function.
3081 (convert_value_from_python): Use gdbpy_is_string. Change to throw
3082 Python exception instead of a GDB exception on error. Properly check
3084 (valpy_getitem): Convert field name to host string. Handle array
3085 accesses. Adapt to new behaviour of convert_value_from_python.
3086 (valpy_new): Adapt to new behaviour of convert_value_from_python.
3087 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
3088 VALPY_BITXOR, VALPY_BITOR>: New constants.
3089 (valpy_binop): Update. Adapt to new behaviour of
3090 convert_value_from_python.
3091 (valpy_invert): New function.
3092 (valpy_lsh): Likewise.
3093 (valpy_rsh): Likewise.
3094 (valpy_and): Likewise.
3095 (valpy_or): Likewise.
3096 (valpy_xor): Likewise.
3097 (valpy_richcompare): Call convert_value_from_python instead of doing
3099 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
3100 (gdbpy_get_value_from_history): Rename
3101 function to gdbpy_history.
3102 (gdbpy_initialize_values): Don't set tp_new.
3103 (value_object_type): Add valpy_new.
3104 (value_object_methods): Add `address' entry.
3105 (value_object_as_number): Update for new methods.
3106 * python/python.c (GdbMethods): Rename entry from
3107 `get_value_from_history' to `history'.
3109 2009-02-04 Jerome Guitton <guitton@adacore.com>
3111 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
3112 of type to guard against a crash.
3114 2009-02-04 Jerome Guitton <guitton@adacore.com>
3116 * value.c (value_from_contents_and_address): Always return
3117 a lval_memory value, even if address is null.
3119 2009-02-04 Tristan Gingold <gingold@adacore.com>
3121 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
3122 (amd64_darwin_sigcontext_addr): Ditto.
3123 (darwin_dwarf_signal_frame_p): Ditto.
3124 (i386_darwin_init_abi): Handle signal frames, use the const for
3126 (x86_darwin_init_abi_64): Ditto.
3128 2009-02-04 Tristan Gingold <gingold@adacore.com>
3130 * i386-tdep.c (i386_sigtramp_p): Make it public.
3131 * i386-tdep.h (i386_sigtramp_p): Declare.
3133 2009-02-04 Tristan Gingold <gingold@adacore.com>
3135 * machoread.c (macho_symfile_read): Read minsymtab also from
3137 (macho_symfile_read): Try to read dwarf2 frame info from main
3138 object file, but not from OSO files.
3139 (macho_symfile_offsets): Update section names for latest BFD
3141 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
3142 (x86_darwin_init_abi_64): Ditto.
3143 * solib-darwin.c: New file.
3144 * solib-darwin.h: New file.
3145 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
3147 2009-02-04 Tristan Gingold <gingold@adacore.com>
3149 * solist.h (struct target_so_ops): Comment fallback behavior for
3152 2009-02-03 Tom Tromey <tromey@redhat.com>
3154 * completer.c (add_struct_fields): Check type_name against NULL
3157 2009-02-03 Joel Brobecker <brobecker@adacore.com>
3159 * MAINTAINERS: Update Elena's email address.
3161 2009-02-02 Joel Brobecker <brobecker@adacore.com>
3163 * breakpoint (update_watchpoint): Minor comment adjustment.
3165 2009-02-02 Tom Tromey <tromey@redhat.com>
3168 * completer.c (count_struct_fields): Count method names.
3169 (add_struct_fields): Add matching method names.
3171 2009-02-02 Doug Evans <dje@google.com>
3173 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
3174 doing any further tcl/tk configury. Don't configure gdbtk if
3175 tcl or tk check fails.
3176 * aclocal.m4: Regenerate.
3177 * configure: Regenerate.
3179 2009-02-02 Tom Tromey <tromey@redhat.com>
3182 * valops.c (find_overload_match): Follow typedefs before taking
3183 address of object argument.
3185 2009-02-01 Doug Evans <dje@google.com>
3187 * target.h (target_waitstatus_to_string): Declare.
3188 * target.c (target_waitstatus_to_string): New function. Copied from
3189 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
3190 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
3191 TARGET_WAITKIND_NO_HISTORY.
3192 (debug_to_wait): Call it.
3193 * infrun.c (wait_for_inferior): If debug_infrun, print result of
3195 (fetch_inferior_event): Ditto.
3197 2009-01-30 Tom Tromey <tromey@redhat.com>
3199 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
3201 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3204 * thread.c (do_captured_list_thread_ids): Report the current
3207 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
3209 * breakpoint.c (create_breakpoint, create_breakpoints)
3210 (break_command_really, set_breakpoint): New parameter enabled.
3211 (create_breakpoint, break_command_really): Make breakpoint
3212 disabled if so requested.
3213 * breakpoint.h (set_breakpoint): New parameter enabled.
3214 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
3216 2009-01-28 Doug Evans <dje@google.com>
3218 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
3219 (amd64_displaced_step_fixup): Declare.
3220 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
3221 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
3222 and make static global.
3223 (amd64_arch_regmap_len): New static global.
3224 (amd64_arch_reg_to_regnum): New function.
3225 (struct amd64_insn): New struct.
3226 (struct displaced_step_closure): New struct.
3227 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
3228 (rex_prefix_p,skip_prefixes)
3229 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
3230 (amd64_insn_length,amd64_get_unused_input_int_reg)
3231 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
3232 (amd64_displaced_step_copy_insn)
3233 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
3234 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
3235 (amd64_displaced_step_fixup): New functions.
3236 * amd64-linux-tdep.c: #include arch-utils.h.
3237 (amd64_linux_init_abi): Install displaced stepping support.
3239 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
3240 Jerome Guitton <guitton@adacore.com>
3242 * configure, config.in: Regenerated.
3243 * configure.ac: Add --with-system-gdbinit.
3244 * main.c (get_init_files): New.
3245 (captured_main): Use get_init_files. Load system gdbinit before
3247 (print_gdb_help): Print location of init files.
3249 2009-01-28 Pedro Alves <pedro@codesourcery.com>
3251 * corefile.c (generic_search): Delete disabled code.
3252 * gdbcore.h (generic_search): Delete declaration.
3254 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3256 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
3257 parent to the child.
3258 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
3259 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
3260 remove_breakpoints to remove breakpoints from the parent.
3262 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3264 PR backtrace/9458, PR backtrace/8864:
3265 * frame.c (create_new_frame): Update the frame's cached PC before
3266 finding its unwinder. Use frame_id_build to build the new frame's
3268 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
3269 array values from the ``args'' array values.
3271 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3273 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
3274 (create_array_type, create_set_type, init_flags_type)
3275 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
3276 with a call to XZALLOC or XCALLOC, and pairs of calls to
3277 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
3279 2009-01-26 Pedro Alves <pedro@codesourcery.com>
3281 Add "maint set|show internal-error|internal-warning quit|corefile
3282 ask|yes|no" commands.
3285 * utils.c (internal_problem_ask, internal_problem_yes)
3286 (internal_problem_no, internal_problem_modes): New.
3287 (struct internal_problem): Remove FIXME. Make should_quit and
3288 should_dump_core types to char *.
3289 (internal_vproblem, internal_error_problem)
3290 (internal_warning_problem): Adjust.
3291 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
3293 (add_internal_problem_command): New.
3294 (_initialize_utils): New.
3296 2009-01-25 Pedro Alves <pedro@codesourcery.com>
3298 * infcmd.c (program_info): Use paddress instead of casting stop_pc
3301 2009-01-24 Pedro Alves <pedro@codesourcery.com>
3303 * infrun.c (normal_stop): Don't call
3304 deprecated_update_frame_pc_hack.
3305 * frame.c (deprecated_update_frame_pc_hack)
3306 (deprecated_update_frame_base_hack): Delete, and ...
3307 (create_new_frame): ... inline here.
3308 * frame.h (deprecated_update_frame_pc_hack)
3309 (deprecated_update_frame_base_hack): Delete declarations.
3311 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3313 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
3314 * cli/cli-setshow.c (do_setshow_command): Handle it.
3315 * command.h (enum var_types): Add var_zuinteger.
3316 (add_setshow_zuinteger_cmd): Declare.
3318 * valprint.c (_initialize_valprint): Change the set input-radix
3319 and set output-radix commands to zuinteger type.
3321 2009-01-23 Pedro Alves <pedro@codesourcery.com>
3324 * infrun.c (normal_stop): Tag threads as stopped, and run the
3325 hook-stop before printing the stack frame.
3327 2009-01-22 Pedro Alves <pedro@codesourcery.com>
3330 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
3333 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
3335 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
3338 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
3341 * infcmd.c (signal_command): Do not specify a resume PC.
3343 2009-01-19 Doug Evans <dje@google.com>
3345 * dummy-frame.c (dummy_frame): Replace regcache member with
3347 (dummy_frame_push): Replace caller_regcache arg with caller_state.
3348 All callers updated.
3349 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
3350 (dummy_frame_pop): Rewrite. Verify requested frame is in the
3351 dummy frame stack. Restore program state.
3352 (cleanup_dummy_frames): Rewrite.
3353 (dummy_frame_sniffer): Update. Make static.
3354 * dummy-frame.h (regcache,frame_info): Delete forward decls.
3355 (inferior_thread_state): New forward decl.
3356 (dummy_frame_push): Update prototype.
3357 * frame.c (frame_pop): dummy_frame_pop now does all the work for
3359 * infcall.c (breakpoint_auto_delete_contents): Delete.
3360 (get_function_name,run_inferior_call): New fns.
3361 (call_function_by_hand): Simplify by moving some code to
3362 get_function_name, run_inferior_call. Inferior function call wrapped
3363 in TRY_CATCH so there's less need for cleanups and all exits from
3364 proceed are handled similarily. Detect program exit.
3365 Detect program stopping in a different thread.
3366 Make error messages more consistent.
3367 * inferior.h (inferior_thread_state): Declare (opaque type).
3368 (save_inferior_thread_state,restore_inferior_thread_state,
3369 make_cleanup_restore_inferior_thread_state,
3370 discard_inferior_thread_state, get_inferior_thread_state_regcache):
3372 (save_inferior_status): Update prototype.
3373 * infrun.c: (normal_stop): When stopped for the completion of an
3374 inferior function call, verify the expected stack frame kind.
3375 (inferior_thread_state): New struct.
3376 (save_inferior_thread_state,restore_inferior_thread_state,
3377 do_restore_inferior_thread_state_cleanup,
3378 make_cleanup_restore_inferior_thread_state,
3379 discard_inferior_thread_state,
3380 get_inferior_thread_state_regcache): New functions.
3381 (inferior_status): Move stop_signal, stop_pc, registers to
3382 inferior_thread_state. Remove restore_stack_info.
3383 (save_inferior_status): Remove arg restore_stack_info.
3384 All callers updated. Remove saving of state now saved by
3385 save_inferior_thread_state.
3386 (restore_inferior_status): Remove restoration of state now done by
3387 restore_inferior_thread_state.
3388 (discard_inferior_status): Remove freeing of registers, now done by
3389 discard_inferior_thread_state.
3391 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3393 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
3394 at a time, times NUM_TO_SCROLL.
3395 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
3396 fetch the selected frame if there is no stack.
3398 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3401 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
3403 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
3404 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
3405 is thrown while handling an event, finish the thread state.
3406 (normal_stop): Use finish_thread_state cleanup.
3407 * infcmd.c (run_command_1): If an error is thrown while starting
3408 the inferior, finish the thread state.
3410 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3412 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
3413 skip breakpoints without a location (pending breakpoints).
3415 2009-01-18 Pedro Alves <pedro@codesourcery.com>
3418 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
3420 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
3422 * thread.c (thread_command): Move call to annotate_thread_changed
3424 (do_captured_thread_select): ... here, to avoid printing an
3425 annotation if the thread change generates an exception.
3427 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3429 * NEWS: Document x86_64/MinGW as a new native configuration.
3431 2009-01-16 Joel Brobecker <brobecker@adacore.com>
3433 * NEWS: Move the documentation of "info os processes" to
3434 the appropriate section (documenting the new commands).
3436 2009-01-15 Doug Evans <dje@google.com>
3438 * target.h (target_signal_to_string): Make return type const char *.
3439 (target_signal_to_name): Ditto.
3440 (target_signal_from_name): Make arg const char *.
3441 * infrun.c (sig_print_info): Update.
3442 * signals/signals.c (signals): Make array and struct members const.
3443 (target_signal_to_string): Make return type const char *.
3444 (target_signal_to_name): Ditto.
3445 (target_signal_from_name): Make arg const char *.
3447 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3448 Tristan Gingold <gingold@adacore.com>
3450 * solist.h (struct target_so_ops): New member bfd_open.
3451 (solib_find): Add prototype.
3452 (solib_bfd_fopen): Add prototype.
3453 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
3454 from solib_bfd_open.
3455 (solib_bfd_open): Use ops->bfd_open override if present. Call
3456 solib_find and solib_bfd_open otherwise.
3458 * objfiles.h (OBJF_KEEPBFD): New define.
3459 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
3460 objfile flag is set.
3461 * solib.c (symbol_add_stub): Do not allocate second BFD for
3462 shared library; use OBJF_KEEPBFD flag on solib objfile.
3464 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3466 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
3468 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
3470 * value.h (address_of_variable): Add prototype.
3471 (locate_var_value): Remove prototype.
3473 * findvar.c (read_var_value): Do not attempt to default frame
3475 (locate_var_value): Remove function.
3476 * valops.c (value_of_variable): Retrieve selected frame for
3477 symbols that require a frame when called with NULL block.
3478 * valops.c (address_of_variable): New function.
3480 * eval.c (evaluate_subexp_for_address): Call address_of_variable
3481 instead of calling locate_var_value.
3482 (evaluate_subexp_with_coercion): Likewise.
3484 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
3486 * NEWS: Document "define" for prefixed commands.
3487 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
3488 show_user_1 for prefix commands.
3489 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
3490 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
3491 commands. Return the containing command list.
3492 (define_command, document_command): Update to handle prefix commands.
3493 (show_user_1): Add prefix and name arguments. Handle prefix
3495 * cli/cli-script.h (show_user_1): Update prototype.
3497 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
3499 * mingw-ser.c (console_select_thread): Add return to make
3501 (pipe_select_thread): Likewise.
3502 (file_select_thread): Likewise.
3504 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3506 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
3509 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3511 * remote.c (extended_remote_mourn_1): Invalidate our notion of
3512 current general thread.
3514 2009-01-14 Pedro Alves <pedro@codesourcery.com>
3516 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
3517 without a live selected thread.
3519 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3521 Update the copyright notice of some of the files I missed
3522 in the previous copyright update.
3524 2009-01-14 Joel Brobecker <brobecker@adacore.com>
3526 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
3527 base address instead of casting it to DWORD.
3529 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
3531 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
3532 for NULL frame pointers.
3534 2009-01-13 Mark Kettenis <kettenis@gnu.org>
3536 * utils.c (host_address_to_string): Reimplement in a way that
3537 avoids the cast of the address to long.
3539 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3541 * mdebugread.c (parse_symbol): Save the symbol private data
3542 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
3543 (psymtab_to_symtab_1): Likewise.
3544 (parse_procedure): Declare variable "e" only in the scope
3545 where it is used. Extract the symbol private data using
3548 2009-01-13 Jim Blandy <jimb@codesourcery.com>
3550 Abstract out common code for copying value locations.
3552 * value.h (set_value_component_location): New declaration.
3553 * value.c (set_value_component_location): New function.
3554 (value_primitive_field): Use it.
3555 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
3556 * valops.c (search_struct_field, value_slice): Same.
3557 * ada-lang.c (coerce_unspec_val_to_type)
3558 (ada_value_primitive_packed_val): Same.
3560 2009-01-13 Joel Brobecker <brobecker@adacore.com>
3562 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
3564 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
3566 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
3568 * i386-cygwin-tdep.c: Ditto.
3569 * i386-windows-nat.c: Ditto.
3570 * windows-nat.h: Ditto.
3571 * windows-tdep.c: Ditto.
3572 * windows-tdep.h: Ditto.
3573 * windows-nat.c: Ditto.
3574 (cygwin_load_start): Redefine as CORE_ADDR.
3575 (cygwin_load_end): Ditto.
3576 (windows_make_so): Coerce result of address arithmetic to uintptr_t
3577 before coercing to CORE_ADDR to avoid a compiler warning.
3578 (handle_exception): Define addr as CORE_ADDR and coerce
3579 ExceptionAddress to uintptr_t before assigining to avoid a compiler
3581 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
3584 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3586 Fix linking with --enable-targets=all:
3587 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
3588 (HFILES_NO_SRCDIR): Add windows-tdep.h.
3589 (ALLDEPFILES): Add windows-tdep.c.
3591 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
3593 * win32-nat.h: Delete.
3594 * windows-nat.h: Rename from win32-nat.h.
3595 * win32-nat.c: Delete.
3596 * windows-nat.c: Rename from win32-nat.c.
3597 * win32-termcap.c: Delete.
3598 * windows-termcap.c: Rename from win32-termcap.c.
3599 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
3600 * configure.ac: Handle rename from win32-termcap.c ->
3602 * configure: Regenerate.
3603 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
3604 -> windows-termcap.c.
3605 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
3607 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
3608 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
3610 (win32_make_so): Handle cygwin compiler warning due to change of
3611 load_addr from DWORD to LPVOID.
3612 (handle_load_dll): Use %p in format string to properly print address
3613 and avoid a compiler warning.
3614 (DEBUG_EXCEPTION_SIMPLE): Ditto.
3615 (handle_exception): Ditto.
3616 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
3617 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
3619 * config/i386/mingw.mh: Ditto.
3620 * config/i386/mingw64.mh: Ditto.
3622 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3624 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
3625 arrayprint_recurse_level to a parameter. Update all the callers. New
3626 comment at autovariables.
3628 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3630 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
3633 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3635 * target.c (target_xfer_partial): Use host_address_to_string to
3636 print the address of readbuf and writebuf. Cast the address of
3637 elements inside the myaddr buffer into intptr_t.
3638 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
3639 Cast the address of elements inside the myaddr buffer into
3642 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3644 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
3645 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
3646 * configure.host, configure.tgt: Add handling for x86_64/windows.
3647 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
3648 and amd64-windows-tdep.c.
3650 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3652 * win32-tdep.h, win32-tdep.c: New files.
3653 * i386-cygwin-tdep.h: Delete.
3654 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
3656 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
3657 * win32-nat.c: Likewise.
3658 * configure.tgt: Add win32-tdep.o to the list of target object
3659 files for i386-cygwin and i386-mingw targets.
3661 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3663 * win32-nat.h: New file.
3664 * win32-nat.c (mappings): Initialize to NULL.
3665 (win32_set_context_register_offsets): New function.
3666 * i386-windows-nat.c: New file.
3667 (mappings): Moved here from win32-nat.c.
3668 (_initialize_i386_windows_nat): New function.
3669 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
3670 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
3672 2009-01-09 Andreas Schwab <schwab@suse.de>
3674 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
3676 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
3678 * gdbtypes.c (append_composite_type_field): Correct the location of
3681 2009-01-09 Pedro Alves <pedro@codesourcery.com>
3683 * defs.h (deprecated_error_hook): Delete declaration.
3684 * interps.c (clear_interpreter_hooks): Adjust.
3685 * remote-sim.c (gdb_os_error): Don't try to call
3686 deprecated_error_hook. No need to call exit anymore.
3687 * top.c (deprecated_error_hook): Delete.
3689 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3691 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
3692 to print the address of the gdbarch pointer.
3694 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3696 * gdbarch.sh: Fix all the compilation errors on amd64-windows
3697 due to casting a pointer to a long when printing a function
3698 address. Instead, use host_address_to_string to convert our
3699 address to a string.
3700 * gdbarch.c: Regenerate.
3702 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3704 * event-top.c (async_disconnect, async_stop_sig): use "raise"
3705 instead of "kill" to raise a signal.
3707 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3709 * win32-nat.c (get_module_name): Change the type of parameter
3710 "base_address" to LPVOID. Remove unnecessary cast.
3711 (struct lm_info): Change type of load_addr to LPVOID.
3712 (win32_make_so): Change the type of parameter "load_addr"
3713 to LPVOID. Remove some unnecessary casts.
3714 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
3715 (win32_xfer_shared_libraries): Add missing cast.
3717 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3719 * win32-nat.c (has_detach_ability, set_process_privilege):
3720 Cast the result of GetProcAddress to (void *) to avoid
3721 a compilation warning.
3723 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3725 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
3728 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3730 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
3731 definition of local variable "done".
3732 (info_w32_command, handle_exception): Remove unnecessary cast.
3734 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3736 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
3737 DebugSetProcessKillOnExit. Update all uses in this file.
3738 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
3739 Update all uses in this file.
3741 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3743 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
3744 and use it when pushing the target.
3745 (win32_attach, win32_create_inferior): Update call to
3746 do_initial_win32_stuff.
3747 (win32_detach, win32_mourn_inferior): Use our ops parameter
3748 instead of the global win32_ops to unpush the target.
3750 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3752 * ser-mingw.c (ser_windows_open): Use proper type when casting
3753 in call to _open_osfhandle.
3755 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
3757 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
3759 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3761 * CONTRIBUTE: Minor reformatting.
3763 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
3765 * MAINTAINERS: Add myself to Write After Approval.
3766 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
3769 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
3771 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
3772 Call exit to make it obvious to GCC.
3774 2009-01-08 Tom Tromey <tromey@redhat.com>
3776 PR breakpoints/9350:
3777 * varobj.c (varobj_invalidate): Unconditionally free
3779 * symfile.c (syms_from_objfile): Free local_addr when returning
3781 * exec.c (exec_file_attach): Do cleanups before returning.
3782 (exec_file_command): Likewise.
3783 * corefile.c (reopen_exec_file): Do cleanups before returning.
3784 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
3786 (do_vec_free): New function.
3787 (update_global_location_list): Make a cleanup for old_locations.
3788 Do cleanups before returning. Remove unused variable 'e'.
3789 (find_condition_and_thread): Free result of parsing the
3791 (print_it_typical): Do cleanups before returning.
3792 (breakpoint_re_set_one): Always free sals.sals.
3794 2009-01-08 Joel Brobecker <brobecker@adacore.com>
3795 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3797 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
3800 2009-01-07 Doug Evans <dje@google.com>
3802 * top.c (gdb_prompt_string): Delete, unused.
3804 2009-01-07 Pedro Alves <pedro@codesourcery.com>
3806 Delete ONE_PROCESS_WRITETEXT leftovers.
3808 * breakpoint.c (insert_bp_location): Delete process_warning
3810 (insert_breakpoint_locations): Adjust.
3811 (reattach_breakpoints): Adjust.
3812 * infrun.c (normal_stop): Drop "It might be running in another
3815 2009-01-07 Stan Shebs <stan@codesourcery.com>
3817 * config/pa/linux.mh (XDEPFILES): Remove.
3819 2009-01-07 Doug Evans <dje@google.com>
3821 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
3823 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
3825 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
3826 spacing, a regression from 2008-04-22.
3828 2009-01-07 Joel Brobecker <brobecker@adacore.com>
3830 * utils.c (gdb_print_host_address): Adjust implementation to
3831 reuse host_address_to_string. Move comment explaining the conversion
3832 from host address to string from here...
3833 (host_address_to_string): ... to there.
3835 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3837 * MAINTAINERS: Add myself for write after approval privileges.
3839 2009-01-06 Tom Tromey <tromey@redhat.com>
3841 * value.c (set_internalvar): Use value_free, not xfree.
3843 2009-01-06 Jim Blandy <jimb@red-bean.com>
3845 Check return values of functions declared with warn_unused_result
3846 attribute in GLIBC 2.8.
3847 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
3848 * inflow.c (check_syscall): New function.
3849 (new_tty): Use check_syscall to check return values from open and dup.
3850 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
3851 * main.c (captured_main): Call cwd after setting up gdb_stderr;
3852 check for errors from getcwd.
3853 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
3854 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
3855 (stdio_file_fputs): Same.
3856 * utils.c (internal_vproblem): abort if last-ditch error message
3859 * top.c (gdb_init): Don't set the current directory here; that's
3860 already been done in captured_main.
3862 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
3864 * ser-tcp.c: Adjust includes.
3865 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
3866 (tcp_auto_retry, tcp_retry_limit): Declare.
3867 (TIMEOUT): Remove, in favor of tcp_retry_limit.
3868 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
3869 (wait_for_connect): New function.
3870 (net_open): Use it. Add auto-retry logic.
3871 (set_tcp_cmd, show_tcp_cmd): New functions.
3872 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
3873 and "set/show tcp connect-timeout" commands.
3874 * NEWS: Document new commands.
3876 2009-01-05 Tom Tromey <tromey@redhat.com>
3878 * python/python-internal.h (Py_ssize_t): Define as int.
3880 2009-01-05 Jim Blandy <jimb@red-bean.com>
3882 * MAINTAINERS: Fix my e-mail address as steering committee member.
3884 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3886 Updated copyright notices for most files.
3888 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3890 * top.c (print_gdb_version): Update copyright year.
3892 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3894 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
3896 2009-01-01 Pedro Alves <pedro@codesourcery.com>
3898 PR breakpoints/9681:
3899 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
3900 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
3901 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
3902 retrow all other exceptions.
3904 For older changes see ChangeLog-2008.
3910 version-control: never