* remote.c (remote_close): Don't call generic_mourn_inferior.

[binutils-gdb.git] / gdb / ChangeLog

2009-03-18  Pedro Alves  <pedro@codesourcery.com>

        * remote.c (remote_close): Don't call generic_mourn_inferior.
        (remote_mourn_1): Call generic_mourn_inferior after closing the
        target.

2009-03-18  Pedro Alves  <pedro@codesourcery.com>

        * remote.c (remote_start_remote): Add missing call to
        init_wait_for_inferior in non-stop mode.

2009-03-18  Pedro Alves  <pedro@codesourcery.com>

        * breakpoint.c (bpstat_should_step): Only consider software
        watchpoints that have a location.

2009-03-17  Joel Brobecker  <brobecker@adacore.com>

        Add a target_ops parameter to the to_kill method in struct target_ops.

        * target.h (struct target_ops): Add a "target_ops *" parameter to
        method to_kill.
        (target_kill): Remove macro. Add declaration.
        * target.c (debug_to_kill): Delete, no longer necessary.
        (target_kill): New function.
        (update_current_target):  Stop inheriting the to_kill method.
        Do not de_fault it to no_process either.
        (setup_target_debug): Do not set current_target.to_kill.
        * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
        linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
        remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
        accordingly.

2009-03-17  Doug Evans  <dje@google.com>

        * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
        glibc 2.3.2 and earlier.

2009-03-17  Joel Brobecker  <brobecker@adacore.com>

        * frame.c (get_prev_frame_1): Do not perform the inner_frame
        sanity check if this_frame is not NORMAL.
        (frame_id_inner): Update the description of this function.

2009-03-17  Hui Zhu  <teawater@gmail.com>

        * stack.c: Change the introduce of "disassemble-next-line".

2009-03-17  Pedro Alves  <pedro@codesourcery.com>

        * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
        declare as extern.

2009-03-17  Hui Zhu  <teawater@gmail.com>

        * stack.c: Include valprint.h.
        (disassemble_next_line): New enum.
        (show_disassemble_next_line): New function.  Show the current
        value of disassemble-next-line.
        (gdb_disassembly_stub_args): New struct for argument passing
        between function do_gdb_disassembly and function
        gdb_disassembly_stub.
        (gdb_disassembly_stub): New function.  Helper for
        gdb_disassembly.
        (do_gdb_disassembly): New function.  Use TRY_CATCH to catch
        the exception from the gdb_disassembly because it will be
        broken by filter sometime.
        (print_frame_info): If disassemble-next-line is set to auto
        or on and doesn't have the line debug messages for $pc,
        output the next instruction.
        If disassemble-next-line is set to on and there is line debug
        messages, output assembly codes for next line.
        (_initialize_stack): Make the "set disassemble-next-line"
        command an auto-boolean command.  Change its class to
        class_stack.  Place it in the top level set list.  Extend help
        to describe the auto mode.

2009-03-17  Pedro Alves  <pedro@codesourcery.com>

        * infrun.c (normal_stop): Don't overwrite old_chain.

2009-03-16  Joel Brobecker  <brobecker@adacore.com>

        * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
        which is undefined, by call to regcache_invalidate, which should
        do what the original author wanted to do.

2009-03-16  Joel Brobecker  <brobecker@adacore.com>

        * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
        (mips_create_inferior): Likewise.

2009-03-16  Joel Brobecker  <brobecker@adacore.com>

        * go32-nat.c (go32_create_inferior): Add missing ops parameter.

2009-03-16  Joel Brobecker  <brobecker@adacore.com>

        * darwin-nat.c (darwin_resume): Fix a compiler warning when
        building on x86_64-darwin.

2009-03-16  Tristan Gingold  <gingold@adacore.com>

        * configure.tgt: Add handling for x86_64-darwin.

2009-03-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.

2009-03-15  Joel Brobecker  <brobecker@adacore.com>

        * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
        Use the ops parameter to get to the target beneath, rather than
        using the current_target global.  Using the current_target global
        was an unintended accident.

2009-03-15  Joel Brobecker  <brobecker@adacore.com>

        Fix an error happening while loading symbols from a core file
        (on AIX).

        * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
        to detect whether we're debugging a core file or not.

2009-03-15  Joel Brobecker  <brobecker@adacore.com>

        Modernize the aix-thread later by getting rid of the base_target
        global.  This brings back to life the AIX port which was otherwise
        crashing all the time.

        * aix-thread.c (base_target): Delete.
        (pd_enable): Do not set base_target.
        (aix_thread_attach): Use find_target_beneath instead of base_target.
        (aix_thread_detach, aix_thread_resume, aix_thread_wait)
        (aix_thread_fetch_registers, aix_thread_store_registers),
        (aix_thread_xfer_partial, aix_thread_mourn_inferior)
        (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
        (aix_thread_kill): Delete. Does not seem necessary.
        (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.

2009-03-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * stack.c (return_command <retval_exp>): New variables retval_expr
        and old_chain.  Inline parse_and_eval to initialize retval_expr.  Check
        RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
        if RETURN_TYPE is NULL.

2009-03-14  Pedro Alves  <pedro@codesourcery.com>

        * remote.c (PACKET_qAttached): New.
        (remote_query_attached): New.
        (remote_add_inferior): Add new `attached' argument.  Handle it.
        (remote_notice_new_inferior, remote_start_remote): Adjust to pass
        -1 to remote_add_inferior in new parameter.
        (extended_remote_attach_1): Adjust to pass 1 to
        remote_add_inferior in the new parameter.
        (extended_remote_create_inferior_1): Adjust to pass 0 to
        remote_add_inferior in the new parameter.
        (_initialize_remote): Add "set/show remote query-attached-packet"
        commands.

2009-03-13  Tom Tromey  <tromey@redhat.com>

        * symtab.c (lookup_symbol_in_language): Use a cleanup.

2009-03-13  Doug Evans  <dje@google.com>

        * exceptions.h: Clean up some comments on catch_exceptions usage.
        * exceptions.c: Ditto.  Plus mark catch_errors as superseded by
        catch_exceptions.

2009-02-17  Joel Brobecker  <brobecker@adacore.com>

        The following patch helps getting rid of a warning inside solib-som.c.

        * source.c (source_full_path_of): Constify parameter filename.
        * defs.h (source_full_path_of): Update declaration accordingly.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
        BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
        Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
        promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

        * ada-tasks.c (ada_task_is_alive): Move up and make static.
        * ada-lang.h (ada_task_is_alive): Remove declaration.

2009-03-12  Jerome Guitton  <guitton@adacore.com>

        * ada-lang.c (ada_delta): Change the type of numerators and
        denominators to DOUBLEST, as they may not fit into a long.
        (scaling_factor): Ditto.

2009-03-12  Jerome Guitton  <guitton@adacore.com>

        * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
        types, if we are unable to determine the actual symbol type
        from its tag, then use the static approximation instead.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

        Fix crash printing packed record with packed array.

        * ada-lang.c (ada_modulus_from_name): New function.
        (ada_modulus): In the case where the type length is bigger than
        the size of the type used to hold the bounds, try determining
        the modulus from the type name.
        (ada_value_primitive_packed_val): Fix bug in the computation of
        ntarg causing an out-of-buffer invalid access.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

        Fix segfault when printing short_integer'last.

        * ada-lang.c (ada_find_any_type): Search in the primitive types
        if a symbol could not be found.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

        * ada-tasks.c (task_states,long_task_states): Add new states
        Activating and Acceptor_Delay_Sleep.  Update the description
        of state Acceptor_Sleep.

2009-03-12  Jonas Maebe <jonas.maebe@elis.ugent.be>  (obvious change)

        Fix a build failure on Darwin following some changes in
        the profile of some target_ops methods.

        * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
        where missing.
        (darwin_stop_inferior, darwin_detach): Likewise.

2009-03-12  Vladimir Prus  <vladimir@codesourcery.com>

        Include token in ^running notification for CLI commands.

        * mi/mi-main.c (mi_execute_command): Set current_token here.
        (mi_cmd_execute): Do not set current_token here.

2009-03-12  Vladimir Prus  <vladimir@codesourcery.com>

        Fix MI timings.

        * mi/mi-main.c (mi_print_timing_maybe): New.
        (captured_mi_execute_command): Simplify. Output timings to
        CLI commands, too.
        (mi_execute_async_cli_command): Do not print timings.
        * mi/mi-main.h (mi_print_timing_maybe): Declare.
        * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.

2009-03-12  Jerome Guitton  <guitton@adacore.com>

        * xcoffread.c (process_linenos): Check if the line in the
        include table refers to the main source file and, if so,
        add them to the main subfile.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

        Fix a build failure on AIX introduced after a change in the profile
        of some of the "methods" in the target_ops structure.
        * aix-thread.c: Add missing target_ops parameter throughout.

        Implement Ada task switching on AIX.
        * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
        (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.

2009-03-11  Daniel Jacobowitz  <dan@codesourcery.com>

        * breakpoint.c (bpstat_check_breakpoint_conditions): Use
        value_mark and value_free_to_mark.
        * objfiles.c (free_objfile): Call objfile_free_data before
        freeing the BFD.

2009-03-10  Hui Zhu  <teawater@gmail.com>

        * disasm.c (gdb_disassembly): Remove unused argument
        "line_num".
        * disasm.h (gdb_disassembly): Ditto.
        * cli/cli-cmds.c (print_disassembly): Ditto.
        * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.

2009-03-09  Paul Pluzhnikov  <ppluzhnikov@google.com>

        * solib.c (solib_contains_address_p): New function.
        (solib_name_from_address): Use it.
        * printcmd.c (display_uses_solib_p): Use it.
        * solib.h (solib_contains_address_p): Declare it.       
        
2009-03-09  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * varobj.c (free_variable): Call value_free.

2009-03-09  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR gdb/9873:
        * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
        Move the variable `macinfo_type' out of the loop.  Create a new
        processing pass before the current one to pre-create `current_file'.
        New complaint on misplaced zero/non-zero definitions/includes.
        Skip first DW_MACINFO_start_file with `at_commandline' set.

2008-03-09  Vladimir Prus  <vladimir@codesourcery.com>

       * solib.c (reload_shared_libraries): Give
       inferior a chance to reset solib breakpoint.
       Reinit frame cache.

2009-03-08  Christopher Faylor  <me+cygwin@cgf.cx>

        * windows-nat.c (dr): Redefine to use largest possible integer which
        holds a pointer.
        (cygwin_set_dr): Avoid coercion.

2009-03-08  Oswald Buddenhagen  <oswald.buddenhagen@trolltech.de>

        * windows-nat.c (windows_create_inferior): Implement --tty handling on
        non-cygwin.

2009-03-06  Paul Pluzhnikov  <ppluzhnikov@google.com>

        Rename solib_address to solib_name_from_address.
        * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
        (disable_breakpoints_in_unloaded_shlib): Update.
        * printcmd.c (display_uses_solib_p): Likewise.
        * stack.c (print_frame): Likewise.
        * solib.c: Rename.
        * solib.h: Rename.
        
2009-03-05  Paul Pluzhnikov  <ppluzhnikov@google.com>

        * printcmd.c (do_one_display): Reparse exp_string.
        (display_uses_solib_p): New function.
        (clear_dangling_display_expressions): New function.
        (_initialize_printcmd): Add observer.
        * solib.c (no_shared_libraries): Swap order of calls to
        clear_solib and objfile_purge_solibs.
        
2009-03-05  Joel Brobecker  <brobecker@adacore.com>

        Implement the target-specific part of Ada tasking support
        on Tru64.

        * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
        (init_dec_thread_ops): Set the to_get_ada_task_ptid method.

2009-03-05  Joel Brobecker  <brobecker@adacore.com>

        Get rid of the global "base_target" and use "find_target_beneath"
        to find the underlying target.
        * dec-thread.c (base_target): Delete.
        (enable_dec_thread): Remove assignement to base_target.
        (dec_thread_detach, dec_thread_wait, dec_thread_wait)
        (dec_thread_fetch_registers, dec_thread_store_registers)
        (dec_thread_mourn_inferior, dec_thread_pid_to_str):
        Update the function profile if necessary.
        Use find_target_beneath to call the same method but from
        the underlying target, removing the need for "base_target".

        * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
        Fix a copy/paste error in a few debug traces...

        * solib-osf.c (init_so): Use a simpler method for computing
        the size of lm_info structure. This also gets rid of warning
        emitted by the compiler.

2009-03-05  Pedro Alves  <pedro@codesourcery.com>

        * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
        duplicates of permanent breakpoints.

2009-03-04  Pedro Alves  <pedro@codesourcery.com>

        * inferior.h (notice_new_inferior): Declare.
        * infcmd.c (notice_new_inferior): New.
        * remote.c (remote_add_inferior, remote_add_thread): New.
        (notice_new_inferiors): Rename to...
        (remote_notice_new_inferior): ... this.  Add RUNNING argument.
        Use remote_add_thread instead of add_thread, passing it the
        RUNNING argument.  Add an inferior with remote_add_inferior.  If
        we just learned about an inferior, call notice_new_inferior.
        (record_currthread): Adjust.
        (remote_threads_info): Adjust to use remote_notice_new_inferior.
        (remote_start_remote, extended_remote_attach_1): Use
        remote_add_inferior.
        (process_stop_reply): Adjust.  Call remote_notice_new_inferior
        after handling expedited registers and watchpoint state.
        (extended_remote_create_inferior_1): Use remote_add_inferior.

2009-03-04  Aleksandar Ristovski  <aristovski@qnx.com>

        * infcmd.c (registers_info): Remove register number case.

2009-03-03  Pedro Alves  <pedro@codesourcery.com>

        * top.c (quit_target): Check for target_has_execution before
        killing or detaching from inferiors.

2009-03-02  Joel Brobecker  <brobecker@adacore.com>

        Remove some unused routines.

        * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
        Delete.
        * ada-lang.c (ada_task_list_iterator_ftype)
        (iterate_over_live_ada_tasks): Delete.
        * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
        Delete.

2009-03-01  Doug Evans  <dje@google.com>

        * symtab.c: Remove trailing whitespace throughout the file.
        (expand_line_sal): Fix some typos and whitespace.

        * Makefile.in (clean): rm -f $(DEPDIR)/*.

        * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
        (init.c): signals/ -> common/.
        (signals.o): Update.
        * target.h (target_signal_to_string,target_signal_to_string)
        (target_signal_from_name,target_signal_to_host_p)
        (target_signal_from_host,target_signal_to_host): Move to ...
        * common/gdb_signals.h: ... here.  New file.
        * common/signals.c: Moved here from signals/signals.c.
        #include gdb_signals.h, remove #include of target.h in gdb case.
        (target_signal_from_command,default_target_signal_to_host)
        (default_target_signal_from_host): Move inside #ifndef GDBSERVER.

        Include thread ID in target_wait debugging output.
        * infrun.c (print_target_wait_results): New function.
        (wait_for_inferior,fetch_inferior_event): Call it.

2009-02-27  Pedro Alves  <pedro@codesourcery.com>

        * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
        with a ptid_t field.
        * linux-thread-db.c (thread_get_info_callback): Build the ptid
        using the pid stored in proc_handle.ptid.
        (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
        (check_for_thread_db, thread_db_detach, check_event)
        (thread_db_mourn_inferior, find_new_threads_callback)
        (thread_db_find_new_threads_1): Adjust.
        * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
        (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.

2009-02-27  Phil Muldoon  <pmuldoon@redhat.com>

        * valprint.c (read_string): Rework clean-up logic. Use
        free_current_contents to clean-up buffer.

2009-02-27  Andreas Schwab  <schwab@linux-m68k.org>

        * MAINTAINERS: Update e-mail address.

2009-02-26  Phil Muldoon  <pmuldoon@redhat.com>

        * python/python-utils.c (python_string_to_unicode): Always return
        a new reference.
        (python_string_to_target_string): Decrement transient python
        instance.
        (python_string_to_host_string): Likewise.

2007-02-26  Pedro Alves  <pedro@codesourcery.com>

        * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
        call to super_fetch_registers.
        (mips64_linux_store_registers): Pass `ops' to call to
        super_store_registers.

2009-02-25  Doug Evans  <dje@google.com>

        * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
        error message.

        * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
        disabled_shlib_breaks, unused.

        * printcmd.c (build_address_symbolic): Fix comment.

2009-02-25  Hui Zhu  <teawater@gmail.com>

        * cli/cli-script.c (define_command): Add _() to query.
        * gnu-nat.c (inf_validate_task_sc): Ditto.
        * infcmd.c (kill_if_already_running): Ditto.
        (jump_command): Ditto.
        (attach_command): Ditto.
        * inflow.c (kill_command): Ditto.
        * infrun.c (handle_command): Ditto.
        * maint.c (maintenance_dump_me): Ditto.
        * memattr.c (mem_delete_command): Ditto.
        * monitor.c (monitor_interrupt_query): Ditto.
        * nto-procfs.c (interrupt_query): Ditto.
        * printcmd.c (undisplay_command): Ditto.
        * remote-mips.c (mips_kill): Ditto.
        * remote.c (interrupt_query): Ditto.
        * solib-irix.c (irix_open_symbol_file_object): Ditto.
        * solib-osf.c (osf_open_symbol_file_object): Ditto.
        * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
        * solib-som.c (som_open_symbol_file_object): Ditto.
        * solib-svr4.c (open_symbol_file_object): Ditto.
        * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
        * target.c (kill_or_be_killed): Ditto.
        * tracepoint.c (delete_trace_command): Ditto.
        * top.c (quit_confirm): Add _() to s that will be used
        in query.

2009-02-24  Pierre Muller  <muller@ics.u-strasbg.fr>

        Fix windows-nat.c compilation failure.

        * windows-nat.c (windows_thread_alive): Fix forward declaration.
        (get_windows_debug_event): Add ops parameter to call to windows_resume.

2009-02-23  Pedro Alves  <pedro@codesourcery.com>

        * remote-sim.c (gdbsim_resume): Add target_ops* argument.

2009-02-23  Jay Krell  <jay.krell@cornell.edu>  (tiny change)

        * symtab.c (find_line_symtab): Initialize exact to avoid
        a compiler warning.

2009-02-23  Pedro Alves  <pedro@codesourcery.com>

        * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
        `ops' to recursive call.

2009-02-23  Pedro Alves  <pedro@codesourcery.com>

        * corelow.c (get_core_registers): Adjust.
        (core_file_thread_alive): Rename to...
        (core_thread_alive): ... this.
        (core_pid_to_str): Try gdbarch_core_pid_to_str first.
        (init_core_ops): Adjust.
        (coreops_suppress_target): Delete.
        (_initialize_corelow): Unconditionally add core_ops.
        * procfs.c: Include "inf-child.h".
        (procfs_ops): Delete.
        (init_procfs_ops): Delete.  Reimplement as...
        (procfs_target): ... this, inheriting from inf-child.
        (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
        (procfs_prepare_to_store): Delete.
        (procfs_store_registers, procfs_resume): Adjust.
        (procfs_open): Delete.
        (procfs_suppress_run): Delete.
        (procfs_can_run): Delete.
        (procfs_mourn_inferior): Adjust.
        (procfs_init_inferior): Add target_ops parameter.  Adjust.
        (procfs_create_inferior): Don't pass procfs_init_inferior to
        fork_inferior.  Instead call it after fork_inferior returns.
        (procfs_find_new_threads): Adjust.
        (_initialize_procfs): Adjust to use procfs_target instead of
        init_procfs_ops.
        * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
        (lwp_to_thread): Use target_thread_alive.
        (sol_thread_open): Delete.
        (sol_thread_attach): Delete.
        (sol_thread_detach, sol_thread_resume, sol_thread_wait)
        (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
        to use find_target_beneath.
        (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
        (sol_thread_xfer_partial): Adjust to use find_target_beneath.
        (sol_thread_files_info, sol_thread_kill_inferior): Delete.
        (check_for_thread_db): New.
        (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
        (sol_thread_new_objfile): Call check_for_thread_db.
        (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
        (sol_thread_can_run): Delete.
        (sol_thread_alive): Adjust to use find_target_beneath.
        (sol_thread_stop): Delete.
        (rw_common): Use target_write_memory or target_read_memory.
        (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
        (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
        (solaris_pid_to_str): Remove check for libthread_db initialization
        failing.
        (sol_find_new_threads): Remove check for libthread_db
        initialization failing, or for an invalid inferior_ptid.  Adjust
        to use find_target_beneath.
        (sol_core_open, sol_core_close, sol_core_detach,
        sol_core_files_info, sol_find_memory_regions,
        sol_make_note_section, ignore): Delete.
        (init_sol_thread_ops): Make it a thread_stratum target.  Remove
        unneeded callback settings.
        (init_sol_core_ops): Delete.
        (_initialize_sol_thread): No longer call init_sol_core_ops, set
        procfs_suppress_run, or hack with core_ops.

        * target.h (struct target_ops): Add a target_ops * parameter to
        to_resume, to_fetch_registers, to_store_registers, to_thread_alive
        and to_find_new_threads.
        (target_fetch_registers, target_store_registers)
        (target_thread_alive, target_find_new_threads): Redeclare as
        function.

        * target.c (update_current_target): Do not inherit or de_fault
        to_resume, to_fetch_registers, to_store_registers,
        to_thread_alive, to_find_new_threads.
        (target_resume): Adjust.
        (target_thread_alive, target_find_new_threads): New.
        (debug_to_resume, debug_to_fetch_registers): Delete.
        (target_fetch_registers): New.
        (debug_to_store_registers): Delete.
        (target_store_registers): New.
        (debug_to_thread_alive, debug_to_find_new_threads): Delete.
        (setup_target_debug): Adjust.

        * gdbcore.h (core_ops): Delete declaration.

        * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
        inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
        i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
        hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
        nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
        alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
        bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
        hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
        ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
        m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
        mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
        ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
        shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
        vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.

        * gdbarch.sh (core_pid_to_str): New gdbarch callback.
        * gdbarch.h, gdbarch.c: Regenerate.

        * sol2-tdep.c: Include "inferior.h".
        (sol2_core_pid_to_str): New.
        * sol2-tdep.h (sol2_core_pid_to_str): Declare.

        * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
        * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
        * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
        * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.

2009-02-22  Doug Evans  <dje@google.com>

        * exec.c (exec_file_attach): Fix comment.

2009-02-22  Pedro Alves  <pedro@codesourcery.com>

        Silence a few -Wmissing-prototypes warnings.

        PR build/9877:
        * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
        it static.
        * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
        * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
        * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
        (_initialize_amd64nbsd_tdep): ... this.
        * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
        (_initialize_arm_linux_tdep): Declare.
        * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
        * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
        * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
        * avr-tdep.c (avr_return_value): Make it static.
        (avr_frame_unwind_cache): Ditto.
        * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
        (bsd_uthread_solib_loaded): Ditto.
        (bsd_uthread_solib_unloaded): Ditto.
        (bsd_uthread_target): Ditto.
        (_initialize_bsd_uthread): Declare.
        * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
        (cris_frame_unwind_cache): Ditto.
        * frv-tdep.c (frv_return_value): Ditto.
        * h8300-tdep.c (h8300_use_struct_convention): Ditto.
        (h8300h_use_struct_convention): Ditto.
        * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
        Ditto.
        * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
        declarations.
        * hppabsd-tdep.c: Include hppabsd-tdep.h.
        (hppabsd_find_global_pointer): Make it static.
        * hppabsd-tdep.h: New.
        * hppanbsd-tdep.c: Include hppabsd-tdep.h.
        (hppabsd_init_abi): Remove declaration.
        (_initialize_hppabsd_tdep): Remove declaration.
        (_initialize_hppanbsd_tdep): Declare.
        * hppaobsd-tdep.c: Include hppabsd-tdep.h.
        (hppabsd_init_abi): Delete declaration.
        (hppaobsd_init_abi): Make it static.
        * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
        * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
        * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
        * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
        * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
        * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
        (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
        (_initialize_m32c_tdep): Declare.
        * m32r-rom.c (_initialize_m32r_rom): Declare.
        * m32r-tdep.c (m32r_skip_prologue): Make it static.
        (m32r_return_value): Ditto.
        * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
        (m68hc11_return_value): Ditto.
        * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
        * m88k-tdep.c (m88k_frame_cache): Make it static.
        * mep-tdep.c (mep_gdb_print_insn): Ditto.
        (mep_return_value): Ditto.
        (_initialize_mep_tdep): Declare.
        * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
        * mips-linux-tdep.c (supply_64bit_reg): Make it static.
        (mips_linux_syscall_next_pc): Ditto.
        (_initialize_mips_linux_tdep): Declare.
        * mips-tdep.c (mips_single_step_through_delay): Make it static.
        * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
        * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
        * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
        * mt-tdep.c (_initialize_mt_tdep): Declare.
        * nbsd-tdep.c: Include nbsd-tdep.h.
        * nto-tdep.c (find_load_phdr): Make it static.
        (_initialize_nto_tdep): Declare.
        * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
        static.
        (_initialize_ppc_linux_tdep): Declare.
        * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
        (m32r_insert_watchpoint, m32r_remove_watchpoint)
        (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
        static.
        * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
        * rs6000-nat.c: Include xcoffread.h.
        (find_toc_address): Don't extern declare get_toc_offset.  Adjust
        to call xcoff_get_to_offset.
        * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
        (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
        (rs6000_skip_trampoline_code): Make static.
        * s390-tdep.c (s390_regset_from_core_section): Ditto.
        * sh-tdep.c (sh_register_reggroup_p): Ditto.
        * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
        (_initialize_shnbsd_tdep): Declare.
        * solib-frv.c (displacement_from_map): Make static.
        (_initialize_frv_solib): Declare.
        * solib-irix.c (fetch_lm_info): Make static.
        (_initialize_irix_solib): Declare.
        * solib-som.c: Include solib-som.h.
        (som_solib_select): Line break.
        * sparc-tdep.c (sparc_regset_from_core_section): Make static.
        * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
        (_initialize_sparcnbsd_tdep): ... this.
        * spu-tdep.c (spu_software_single_step): Make it static.
        (_initialize_spu_tdep): Declare.
        * vax-tdep.c (vax_frame_cache): Make it static.
        * xcoffread.c: Include xcoffread.h.
        (get_toc_offset): Rename to ...
        (xcoff_get_toc_offset): ... this.
        (_initialize_xcoffread): Declare.
        * xcoffread.h: New.
        * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
        * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
        static.
        (_initialize_xtensa_tdep): Declare.

2008-02-21  Pedro Alves  <pedro@codesorcery.com>

        Silence a few -Wmissing-prototypes warnings.

        PR build/9877:
        * amd64-nat.c: Include "amd64-nat.h".
        * fork-child.c (_initialize_fork_child): Ditto.
        * gcore.c (_initialize_gcore): Ditto.
        * inf-ptrace.c: Include "inf-ptrace.h".
        (inf_ptrace_store_registers): Make it static.
        * linux-nat.c (linux_nat_terminal_ours): Make it static.
        (_initialize_linux_nat): Declare before definition.
        * linux-tdep.c: Include "linux-tdep.h".
        * linux-thread-db.c (_initialize_thread_db): Declare before
        definition.
        * proc-service.c (_initialize_proc_service): Ditto.
        * remote.c (remote_send_printf): Make it static.
        * solib.c: Include "solib.h".
        * symfile-mem.c (_initialize_symfile_mem): Declare before
        definition.
        * ada-lang.c (ada_la_decode, ada_match_name)
        (ada_suppress_symbol_printing, ada_is_array_type)
        (ada_value_ptr_subscript, ada_array_length)
        (ada_to_static_fixed_value): Make them static.
        (_initialize_ada_language): Declare before definition.
        * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
        (ada_task_list_changed, ada_new_objfile_observer): Make them
        static.
        (_initialize_tasks): Declare before definition.
        * addrmap.c (_initialize_addrmap): Declare before definition.
        * auxv.c (default_auxv_parse): Make it static.
        * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
        them static.
        * breakpoint.c (remove_sal): Add line break.
        (expand_line_sal_maybe): Make it static.
        * cp-name-parser.y: Include "cp-support.h".
        * cp-valprint.c (cp_find_class_member): Make it static.
        * eval.c (value_f90_subarray): Ditto.
        * exceptions.c (print_any_exception): Ditto.
        * findcmd.c (_initialize_mem_search): Declare before definition.
        * frame.c (frame_observer_target_changed): Make it static.
        * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
        * inf-child.c: Include "inf-child.h".
        * inferior.h (valid_inferior_id): Rename to ...
        (valid_gdb_inferior_id): ... this.
        * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
        Make them static.
        * jv-lang.c (java_language_arch_info): Make it static.
        * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
        * osdata.c (info_osdata_command): Make it static.
        * regcache.c (regcache_observer_target_changed): Make it static.
        * reverse.c (_initialize_reverse): Declare before definition.
        * stabsread.c (cleanup_undefined_types_noname)
        (cleanup_undefined_types_1): Make them static.
        * symfile.c (place_section): Make it static.
        * symtab.c (find_pc_sect_psymtab_closer): Make it static.
        * target-descriptions.c (_initialize_target_descriptions): Declare
        before definition.
        * target.c (default_get_ada_task_ptid, find_default_can_async_p)
        (find_default_is_async_p, find_default_supports_non_stop): Make
        them static.
        (target_supports_non_stop): Add prototype.
        (dummy_pid_to_str): Make it static.
        * utils.c (_initialize_utils): Declare before definition.
        * ada-exp.y (_initialize_ada_exp): Declare before definition.
        * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
        * target.h (struct target_ops): Add a prototype to the
        to_can_execute_reverse callback.
        * macroscope.c (_initialize_macroscope): Declare before definition.
        * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
        * python/python.c (_initialize_python): Declare before definition.
        * tui/tui-command.c: Include "tui/tui-command.h".
        * tui/tui-data.c (init_content_element, init_win_info): Make them
        static.
        * tui/tui-disasm.c: Include "tui/tui-disasm.h".
        * tui/tui-interp.c (_initialize_tui_interp): Declare before
        definition.
        * tui/tui-layout.c: Include "tui/tui-layout.h".
        (_initialize_tui_layout): Declare before definition.
        * tui/tui-regs.c: Include "tui/tui-regs.h".
        (tui_display_reg_element_at_line): Make it static.
        (_initialize_tui_regs): Declare before definition.
        * tui/tui-stack.c (_initialize_tui_stack): Declare before
        definition.
        * tui/tui-win.c: Include "tui/tui-win.h".
        (_initialize_tui_win): Declare before definition.
        (tui_sigwinch_handler): Make it static.  Wrap in ifdef SIGWINCH.
        * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
        (tui_get_cmd_list): Add a prototype.
        * tui/tui-windata.c: Include tui-windata.h.
        * tui/tui-wingeneral.c (box_win): Make it static.
        * cli/cli-logging.c (show_logging_command): Make it static.
        (_initialize_cli_logging): Declare before definition.
        * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
        definition.

2009-02-20  Pierre Muller  <muller@ics.u-strasbg.fr>

        Extend use of i386_use_watchpoints to all i386 native files
        using hardware watchpoints.
        * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
        * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
        * windows-nat.c (init_windows_ops): Ditto.
        * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
        * config/i386/nm-cygwin64.h: Ditto.
        * config/i386/nm-fbsd.h: Ditto.
        * config/i386/nm-go32.h: Ditto.

2009-02-19  Joel Brobecker  <brobecker@adacore.com>

        * ada-typeprint.c (ada_typedef_print): Remove.  Unused.

2009-02-18  Vladimir Prus  <vladimir@codesourcery.com>

        * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
        (mi_interpreter_init): Register the above.
        * solib.c (clear_solib): Notify solib unload.
        * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
        disable breakpoints on a.out targets.

2009-02-17  Vladimir Prus  <vladimir@codesourcery.com>

        * observer.c (observer_test_first_notification_function)
        (observer_test_second_notification_function)
        (observer_test_third_notification_function): Adjust prototype.

2009-02-17  Pedro Alves  <pedro@codesourcery.com>

        * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
        (ALL_TARGET_OBS): Add dicos-tdep.o.
        (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
        * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
        gdb_target_obs.
        (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
        gdb_target_obs.
        * dicos-tdep.h, dicos-tdep.c: New.
        * amd64-dicos-tdep.c: New.
        * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
        inferior.h.  Include dicos-tdep.h.
        (i386_dicos_init_abi): Call dicos_init_abi.
        (i386_dicos_bfd_has_symbol_p): Delete.
        (i386_dicos_osabi_sniffer): Use dicos_load_module_p.

        * NEWS: Mention x86-64 DICOS target support.

2009-02-16  Doug Evans  <dje@google.com>

        * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
        All callers updated.
        (amd64_get_insn_details): Handle more 3-byte opcode insns.
        (amd64_breakpoint_p): Delete.
        (amd64_displaced_step_fixup): When fixing up after stepping an int3,
        don't back up pc to the start of the int3.
        * i386-tdep.c: #include opcode/i386.h.
        (i386_skip_prefixes): New function.
        (i386_absolute_jmp_p): Constify argument.
        (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
        (i386_breakpoint_p): Delete.
        (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
        When fixing up after stepping an int3, don't back up pc to the start
        of the int3.

2009-02-16  Pedro Alves  <pedro@codesourcery.com>

        * corelow.c (core_close): Don't hardcode the core's pid.
        (core_open): Find core threads before calling
        post_create_inferior.
        (add_to_thread_list, get_core_register_section): Take into account
        systems where the regset section names encode the pid of the
        inferior.

        * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
        * gdbarch.h, gdbarch.c: Regenerate.

        * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
        * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
        * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
        * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.

2009-02-14  Vladimir Prus  <vladimir@codesourcery.com>

        Include frame information for *stopped due to CLI commands.

        * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
        * infcmd.c (finish_command_continuation): Pass '1' for
        'print_frame' parameter to the observer.
        * infrun.c (normal_stop): Don't print mi-specific information
        here. Pass 'stop_print_frame' to the 'print_frame' parameter
        of the observer.
        * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
        If we need to print frame, and current uiout is not the MI one,
        print frame again.

2009-02-13  Pierre Muller  <muller@ics.u-strasbg.fr>

        * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
        Replace BSZ macro uses by XTENSA_ISA_BSZ macro.

2009-02-12  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR fortran/9806
        * dwarf2read.c (process_die <DW_TAG_module>, read_module)
        (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.

2009-02-11  Pierre Muller  <muller@ics.u-strasbg.fr>

        * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
        for DW_ATE_signed_char and DW_ATE_unsigned_char
        for pascal language.

2009-02-11  Jim Meyering  <meyering@redhat.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        Avoid NULL dereference.
        * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
        New variable func_type.

2009-02-11  Pedro Alves  <pedro@codesourcery.com>

        * gdbarch.c: Regenerate.

2009-02-10  Pierre Muller  <muller@ics.u-strasbg.fr>

        * p-lang.c (is_pascal_string_type): Fix comment.
        Determine exact size of char elements for GPC
        strings.
        (pascal_printstr): Handle char width of 2 or 4.
        * p-valprint.c (pascal_val_print): Handle char
        of width 2 or 4.

2009-02-07  Daniel Jacobowitz  <dan@codesourcery.com>

        * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
        inside the loop.  Only call addrmap_set_empty if the compilation unit
        had DW_AT_high_pc and DW_AT_low_pc.  Update call to
        scan_partial_symbols.
        (scan_partial_symbols): Take NEED_PC argument and pass it along with
        LOWPC and HIGHPC.
        (add_partial_namespace): Take NEED_PC argument and pass it through.
        (add_partial_subprogram): Take NEED_PC argument.  Update the addrmap
        if necessary.

2009-02-07  Pedro Alves  <pedro@codesourcery.com>

        * NEWS: Mention inspecting extra signal information, $_siginfo,
        and the qXfer:siginfo:read and qXfer:siginfo:write packets.

2009-02-07  Pedro Alves  <pedro@codesourcery.com>

        * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
        isn't defined.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

        * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
        (compat_timer_t, compat_clock_t, struct compat_timeval)
        (compat_sigval_t, compat_siginfo_t): New types.
        (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
        (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
        (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
        (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
        (amd64_linux_siginfo_fixup): New.
        * linux-nat.c (linux_nat_siginfo_fixup): New.
        (siginfo_fixup): New.
        (linux_xfer_siginfo): Use siginfo_fixup to convert between the
        siginfo layout expected by ptrace and the siginfo layout of the
        inferior.
        (linux_nat_set_siginfo_fixup): New.
        * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

        * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
        * infrun.c (siginfo_value_read, siginfo_value_write): New.
        (siginfo_value_funcs): New.
        (siginfo_make_value): New.
        (_initialize_infrun): Create the $_siginfo convenience variable.
        * gdbtypes.h (append_composite_type_field_aligned): Declare.
        * gdbtypes.c (append_composite_type_field): Rename to...
        (append_composite_type_field_aligned): ... this.  Add ALIGNMENT
        argument.  Handle it.
        (append_composite_type_field): Rewrite on top of
        append_composite_type_field_aligned.
        * value.h (internalvar_make_value): New typedef.
        (struct internalvar) <make_value>: New field.
        (create_internalvar_type_lazy): Declare.
        * value.c (create_internalvar): Clear make_value.
        (create_internalvar_type_lazy): New.
        (value_of_internalvar): If make_value is set use it.
        (preserve_values): Skip internal variables that don't have a
        value.
        * gdbarch.sh (get_siginfo_type): New.
        * gdbarch.h, gdbarch.c: Regenerate.

        * linux-tdep.h, linux-tdep.c: New.
        * amd64-linux-tdep.c: Include "linux-tdep.h".
        (amd64_linux_init_abi): Register linux_get_siginfo_type and
        linux_get_siginfo_mapper.
        * i386-linux-tdep.c: Include "linux-tdep.h".
        (i386_linux_init_abi): Register linux_get_siginfo_type and
        linux_get_siginfo_mapper.
        * arm-linux-tdep.c: Include "linux-tdep.h".
        (i386_linux_init_abi): Register linux_get_siginfo_type and
        linux_get_siginfo_mapper.

        * linux-nat.c (linux_xfer_siginfo): New.
        (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
        * remote.c (PACKET_qXfer_siginfo_read)
        (PACKET_qXfer_siginfo_write): New.
        (feature remote_protocol_features): Add "qXfer:siginfo:read" and
        "qXfer:siginfo:write" features.
        (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
        (_initialize_remote): Add "set/show remote read-siginfo-object"
        and "set/show remote write-siginfo-object" commands.

        * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
        (HFILES_NO_SRCDIR): Add linux-tdep.h.
        (ALLDEPFILES): Add linux-tdep.c.

        * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
        (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
        gdb_target_obs.

2009-02-06  Jim Blandy  <jimb@codesourcery.com>
            Daniel Jacobowitz  <dan@codesourcery.com>
            Vladimir Prus  <vladimir@codesourcery.com>
            Pedro Alves  <pedro@codesourcery.com>

        * defs.h (enum lval_type): New value: lval_computed.
        * value.h (struct lval_funcs): New type.
        (allocate_computed_value, value_computed_funcs)
        (value_computed_closure): New declarations.
        * value.c (struct value): Add a structure to the location union
        for computed lvalues, containing 'funcs' and 'closure' members.
        (allocate_computed_value, value_computed_funcs)
        (value_computed_closure): New functions.
        (value_free): For computed lvalues, call the closure's
        'free_closure' function before freeing the value itself.
        (value_copy): If we're copying an lval_computed value, call the
        closure's 'copy_closure' function.
        (set_value_component_location): If the original value is a
        computed lvalue, then call the closure's 'copy_closure' function.
        (value_of_internalvar): If an internal variable's value is a
        computed lvalue, make retrieving its value produce an equivalent
        computed lvalue.
        * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
        their read function.
        (value_assign): Assign to computed lvalues by calling their write
        function.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

        * linux-nat.c (linux_nat_wait): Adjust.
        (linux_nat_pid_to_str): Adjust.  Remove call to thread_db_init.
        * linux-nat.h (thread_db_init): Delete declaration.
        * linux-thread-db.c (target_beneath): Delete.
        (thread_db_init): Delete.
        (thread_db_detach): Use find_target_beneath.
        (thread_db_wait): Adjust interface.  Use find_target_beneath.
        (thread_db_mourn_inferior): Use find_target_beneath.
        (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
        (thread_db_async_mask): Delete.
        (thread_db_pid_to_str): Adjust interface.  Use
        find_target_beneath.
        (thread_db_get_thread_local_address): Adjust interface.  Use
        find_target_beneath.
        (init_thread_db_ops): Delete references to delete functions.
        * target.c (update_current_target): Don't inherit or default
        to_wait.  Don't inherit to_pid_to_str and
        to_get_thread_local_address.
        (target_translate_tls_address): Look for a pushed target that
        implements to_get_thread_local_address, and use it instead of
        checking for target_get_thread_local_address_p.
        (target_wait, target_pid_to_str): Reimplement as functions.
        (dummy_pid_to_str): New.
        (init_dummy_target): Register it.
        (debug_to_wait): Delete.
        * target.h (struct target_ops): Make to_wait, to_pid_to_str and
        to_get_thread_local_address accept a pointer to struct target_ops.
        (target_wait): Delete macro, and declare as function.
        (target_pid_to_str): Likewise.
        (target_get_thread_local_address)
        (target_get_thread_local_address_p): Delete.
        (noprocess): Add NORETURN and ATTR_NORETURN tags.
        * inf-ptrace.c (inf_ptrace_wait): Adjust.
        (inf_ptrace_pid_to_str): New.
        (inf_ptrace_target): Use inf_ptrace_pid_to_str.
        * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
        * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
        * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
        Adjust.
        * corelow.c (core_pid_to_str): Adjust.
        * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
        * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
        * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
        * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
        * hpux-thread.c (hpux_thread_wait): Adjust.
        * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
        * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
        * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
        * procfs.c (procfs_pid_to_str): Adjust.
        * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
        * remote-mips.c (mips_wait): Adjust.
        * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
        * remote.c (remote_wait, remote_pid_to_str)
        (remote_get_thread_local_address): Adjust.
        * rs6000-nat.c (rs6000_wait): Adjust.
        * sol-thread.c (procfs_pid_to_str): Adjust declaration.
        (sol_thread_wait, solaris_pid_to_str): Adjust.
        * spu-linux-nat.c (spu_child_wait): Adjust.
        * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.

2009-02-06  Tom Tromey  <tromey@redhat.com>

        * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
        (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
        (python-cmd.o): New target.
        * cli/cli-decode.c (set_cmd_completer): Add self parameter to
        completer prototype.
        (add_cmd): Initialize destroyer member of cmd_list_element. Use
        make_symbol_completion_list_fn as completer.
        (delete_cmd): Call destroyer if one is set.
        * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
        completer member.  Add destroyer member.
        (set_cmd_completer): Add self parameter to
        completer prototype.
        * command.h (set_cmd_completer): Add cmd parameter to
        completer prototype.
        * completer.c (noop_completer, filename_completer,
        location_completer, expression_completer, command_completer): Adapt
        to new completer prototype.
        (complete_line_internal): Pass new parameter to completer function.
        * completer.h (noop_completer, filename_completer,
        location_completer, expression_completer, command_completer): Adapt
        prototypes to new completer prototype.
        * interps.c (interpreter_completer): Adapt to new completer
        prototype.
        * python/python-cmd.c: New file.
        * python/python-internal.h (gdbpy_initialize_commands): Add
        prototype.
        (gdbpy_doc_cst): Add forward declaration.
        * python/python.c (gdbpy_doc_cst): Declare.
        (_initialize_python): Call gdbpy_initialize_commands.  Initialize
        gdbpy_doc_cst.
        * symtab.c (make_symbol_completion_list_fn): New function.
        * symtab.h (make_symbol_completion_list_fn): Add prototype.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

        * target.c (target_get_osdata): Check for equal or higher than
        process_stratum, not dummy_stratum.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

        * remote.c (extended_remote_can_run): Delete.
        (init_remote_ops): Don't register it.
        * target.c (target_get_osdata): Don't check for target_can_run.
        Instead any target that has already been pushed, otherwise
        fallback to the default run target.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

        * target.c (target_create_inferior, target_detach)
        (target_mourn_inferior, target_attach, target_close): Do target
        debug output.
        (debug_to_attach, debug_to_detach, debug_to_create_inferior)
        (debug_to_mourn_inferior, debug_to_close): Delete.
        (setup_target_debug): Adjust.

2009-02-05  Pedro Alves  <pedro@codesourcery.com>

        * target.h (target_stopped_data_address_p): Delete declaration,
        and don't define as macro.
        * target.c (target_stopped_data_address_p): Delete.

2009-02-05  Thiago Jung Bauermann  <bauerman@br.ibm.com>
            Tom Tromey  <tromey@redhat.com>

        * python/python-utils.c (target_string_to_unicode): New function.
        * python/python-internal.h (target_string_to_unicode): New prototype.
        * python/python-value.c (valpy_string): New function.
        (value_object_methods): Add `string' entry.

2009-02-05  Pedro Alves  <pedro@codesourcery.com>

        * target.h (target_tid_to_str): Delete.
        * thread.c (print_thread_info, thread_apply_all_command)
        (thread_apply_command, thread_command, do_captured_thread_select):
        Use target_pid_to_str instead of target_tid_to_str.
        * linux-fork.c (delete_fork_command): Likewise.

2009-02-05  Pedro Alves  <pedro@codesourcery.com>

        * frame.c (has_stack_frames): Make public.
        (get_prev_frame): Don't allow a NULL this_frame anymore.
        * frame.h (has_stack_frames): Declare.
        * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
        to get_prev_frame, instead start at get_current_frame.
        (varobj_create): Check has_stack_frames before getting any frame;
        eliminate one usage of deprecated_safe_get_selected_frame.

2009-02-05  Tom Tromey  <tromey@redhat.com>
            Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * python/python.c (GdbMethods): Move to bottom of file.
        (get_parameter, execute_gdb_command, gdbpy_write,
        gdbpy_flush): Remove forward declarations.
        (eval_python_from_control_command): Fix error checking of function
        PyRun_SimpleString.  Fix error string.
        (python_command): Likewise.
        (execute_gdb_command): Added from_tty argument.

2009-02-05  Thiago Jung Bauermann  <bauerman@br.ibm.com>

        * language.h (language_dfn): Add la_get_string member.
        (LA_GET_STRING): New macro.
        (default_get_string): New prototype.
        * language.c (default_get_string): New function.
        (unknown_language_defn, auto_language_defn, local_language_defn): Use
        default_get_string for la_get_string.
        * c-lang.c (c_get_string): New function.
        (c_language_defn, cplus_language_defn, asm_language_defn): Use
        c_get_string for la_get_string.
        (minimal_language_defn): Likewise
        * ada-lang.c (ada_language_defn): Likewise.
        * f-lang.c (f_language_defn): Use default_get_string for
        la_get_string.
        * jv-lang.c (java_language_defn): Likewise.
        * m2-lang.c (m2_language_defn): Likewise.
        * objc-lang.c (objc_language_defn): Likewise.
        * p-lang.c (p_language_defn): Likewise.
        * scm-lang.c (scm_language_defn): Likewise.
        * typeprint.c (type_to_string): New function.
        * value.h (type_to_string): New prototype.
        * valprint.c (val_print_string): Factor out code for reading string
        from the inferior into its own function.  Put 2 spaces after period
        in comments.
        (read_string): New function.
        * valprint.h (read_string): New prototype.

2009-01-07  Pierre Muller  <muller@ics.u-strasbg.fr>
            Tom Tromey  <tromey@redhat.com>

        PR breakpoints/8079:
        * breakpoint.c (print_one_breakpoint): Use exp_string field
        to display expression of watchpoints.
        (mention): Likewise.
        (watch_command_1): Remove trailing whitespace from expression.
        * printcmd.c (struct display) <exp_string>: New field.
        (display_command): Set exp_string.
        (free_display): Free exp_string.
        (clear_displays): Use free_display.
        (do_one_display): Print exp_string.
        (display_info): Likewise.

2009-02-04  Tom Tromey  <tromey@redhat.com>
            Thiago Jung Bauermann  <bauerman@br.ibm.com>
            Phil Muldoon  <pmuldoon@redhat.com>

        * python/python-internal.h (gdbpy_get_value_from_history): Rename
        prototype to gdbpy_history.
        (gdbpy_is_string): Declare.
        (python_string_to_host_string): Declare.
        * python/python-utils.c (gdbpy_is_string): New function.
        (unicode_to_encoded_string): New function.
        (unicode_to_target_string): Use it.
        (python_string_to_host_string): New function.
        * python/python-value.c (valpy_address): New function.
        (convert_value_from_python): Use gdbpy_is_string.  Change to throw
        Python exception instead of a GDB exception on error.  Properly check
        Python booleans.
        (valpy_getitem): Convert field name to host string.  Handle array
        accesses.  Adapt to new behaviour of convert_value_from_python.
        (valpy_new): Adapt to new behaviour of convert_value_from_python.
        (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
        VALPY_BITXOR, VALPY_BITOR>: New constants.
        (valpy_binop): Update.  Adapt to new behaviour of
        convert_value_from_python.
        (valpy_invert): New function.
        (valpy_lsh): Likewise.
        (valpy_rsh): Likewise.
        (valpy_and): Likewise.
        (valpy_or): Likewise.
        (valpy_xor): Likewise.
        (valpy_richcompare): Call convert_value_from_python instead of doing
        conversions itself.
        (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
        (gdbpy_get_value_from_history): Rename
        function to gdbpy_history.
        (gdbpy_initialize_values): Don't set tp_new.
        (value_object_type): Add valpy_new.
        (value_object_methods): Add `address' entry.
        (value_object_as_number): Update for new methods.
        * python/python.c (GdbMethods): Rename entry from
        `get_value_from_history' to `history'.

2009-02-04  Jerome Guitton  <guitton@adacore.com>

        * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
        of type to guard against a crash.

2009-02-04  Jerome Guitton  <guitton@adacore.com>

        * value.c (value_from_contents_and_address): Always return
        a lval_memory value, even if address is null.

2009-02-04  Tristan Gingold  <gingold@adacore.com>

        * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
        (amd64_darwin_sigcontext_addr): Ditto.
        (darwin_dwarf_signal_frame_p): Ditto.
        (i386_darwin_init_abi): Handle signal frames, use the const for
        sc_num_regs.
        (x86_darwin_init_abi_64): Ditto.

2009-02-04  Tristan Gingold  <gingold@adacore.com>

        * i386-tdep.c (i386_sigtramp_p): Make it public.
        * i386-tdep.h (i386_sigtramp_p): Declare.

2009-02-04  Tristan Gingold  <gingold@adacore.com>

        * machoread.c (macho_symfile_read): Read minsymtab also from
        shared libraries.
        (macho_symfile_read): Try to read dwarf2 frame info from main
        object file, but not from OSO files.
        (macho_symfile_offsets): Update section names for latest BFD
        changes.
        * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
        (x86_darwin_init_abi_64): Ditto.
        * solib-darwin.c: New file.
        * solib-darwin.h: New file.
        * configure.tgt: Add solib.o solib-darwin.o for Darwin.

2009-02-04  Tristan Gingold  <gingold@adacore.com>

        * solist.h (struct target_so_ops): Comment fallback behavior for
        operation same.

2009-02-03  Tom Tromey  <tromey@redhat.com>

        * completer.c (add_struct_fields): Check type_name against NULL
        before use.

2009-02-03  Joel Brobecker  <brobecker@adacore.com>

        * MAINTAINERS: Update Elena's email address.

2009-02-02  Joel Brobecker  <brobecker@adacore.com>

        * breakpoint (update_watchpoint): Minor comment adjustment.

2009-02-02  Tom Tromey  <tromey@redhat.com>

        PR gdb/9594:
        * completer.c (count_struct_fields): Count method names.
        (add_struct_fields): Add matching method names.

2009-02-02  Doug Evans  <dje@google.com>

        * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
        doing any further tcl/tk configury.  Don't configure gdbtk if
        tcl or tk check fails.
        * aclocal.m4: Regenerate.
        * configure: Regenerate.

2009-02-02  Tom Tromey  <tromey@redhat.com>

        PR exp/9059:
        * valops.c (find_overload_match): Follow typedefs before taking
        address of object argument.

2009-02-01  Doug Evans  <dje@google.com>

        * target.h (target_waitstatus_to_string): Declare.
        * target.c (target_waitstatus_to_string): New function.  Copied from
        debug_to_wait.  Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
        TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
        TARGET_WAITKIND_NO_HISTORY.
        (debug_to_wait): Call it.
        * infrun.c (wait_for_inferior): If debug_infrun, print result of
        target_wait.
        (fetch_inferior_event): Ditto.

2009-01-30  Tom Tromey  <tromey@redhat.com>

        * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.

2009-01-30  Vladimir Prus  <vladimir@codesourcery.com>

        PR 8145.
        * thread.c (do_captured_list_thread_ids): Report the current
        thread id.

2009-01-30  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c (create_breakpoint, create_breakpoints)
        (break_command_really, set_breakpoint): New parameter enabled.
        (create_breakpoint, break_command_really): Make breakpoint
        disabled if so requested.
        * breakpoint.h (set_breakpoint): New parameter enabled.
        * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.

2009-01-28  Doug Evans  <dje@google.com>

        * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
        (amd64_displaced_step_fixup): Declare.
        * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
        (amd64_arch_regmap): Move out of amd64_analyze_stack_align
        and make static global.
        (amd64_arch_regmap_len): New static global.
        (amd64_arch_reg_to_regnum): New function.
        (struct amd64_insn): New struct.
        (struct displaced_step_closure): New struct.
        (onebyte_has_modrm,twobyte_has_modrm): New static globals.
        (rex_prefix_p,skip_prefixes)
        (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
        (amd64_insn_length,amd64_get_unused_input_int_reg)
        (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
        (amd64_displaced_step_copy_insn)
        (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
        (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
        (amd64_displaced_step_fixup): New functions.
        * amd64-linux-tdep.c: #include arch-utils.h.
        (amd64_linux_init_abi): Install displaced stepping support.

2009-01-28  Daniel Jacobowitz  <dan@codesourcery.com>
            Jerome Guitton  <guitton@adacore.com>

        * configure, config.in: Regenerated.
        * configure.ac: Add --with-system-gdbinit.
        * main.c (get_init_files): New.
        (captured_main): Use get_init_files.  Load system gdbinit before
        $HOME/.gdbinit.
        (print_gdb_help): Print location of init files.

2009-01-28  Pedro Alves  <pedro@codesourcery.com>

        * corefile.c (generic_search): Delete disabled code.
        * gdbcore.h (generic_search): Delete declaration.

2009-01-26  Pedro Alves  <pedro@codesourcery.com>

        * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
        parent to the child.
        * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
        * inf-ptrace.c (inf_ptrace_follow_fork): Likewise.  Use
        remove_breakpoints to remove breakpoints from the parent.

2009-01-26  Pedro Alves  <pedro@codesourcery.com>

        PR backtrace/9458, PR backtrace/8864:
        * frame.c (create_new_frame): Update the frame's cached PC before
        finding its unwinder.  Use frame_id_build to build the new frame's
        id.
        * stack.c (parse_frame_specification_1): Correct setting ``addrs''
        array values from the ``args'' array values.

2009-01-26  Pedro Alves  <pedro@codesourcery.com>

        * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
        (create_array_type, create_set_type, init_flags_type)
        (copy_type_recursive): Replace pairs of calls to XALLOC and memset
        with a call to XZALLOC or XCALLOC, and pairs of calls to
        obstack_alloc and memset with a call to OBSTACK_ZALLOC.

2009-01-26  Pedro Alves  <pedro@codesourcery.com>

        Add "maint set|show internal-error|internal-warning quit|corefile
        ask|yes|no" commands.

        PR gdb/7580:
        * utils.c (internal_problem_ask, internal_problem_yes)
        (internal_problem_no, internal_problem_modes): New.
        (struct internal_problem): Remove FIXME.  Make should_quit and
        should_dump_core types to char *.
        (internal_vproblem, internal_error_problem)
        (internal_warning_problem): Adjust.
        (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
        functions.
        (add_internal_problem_command): New.
        (_initialize_utils): New.

2009-01-25  Pedro Alves  <pedro@codesourcery.com>

        * infcmd.c (program_info): Use paddress instead of casting stop_pc
        to unsigned long.

2009-01-24  Pedro Alves  <pedro@codesourcery.com>

        * infrun.c (normal_stop): Don't call
        deprecated_update_frame_pc_hack.
        * frame.c (deprecated_update_frame_pc_hack)
        (deprecated_update_frame_base_hack): Delete, and ...
        (create_new_frame): ... inline here.
        * frame.h (deprecated_update_frame_pc_hack)
        (deprecated_update_frame_base_hack): Delete declarations.

2009-01-23  Pedro Alves  <pedro@codesourcery.com>

        * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
        * cli/cli-setshow.c (do_setshow_command): Handle it.
        * command.h (enum var_types): Add var_zuinteger.
        (add_setshow_zuinteger_cmd): Declare.

        * valprint.c (_initialize_valprint): Change the set input-radix
        and set output-radix commands to zuinteger type.

2009-01-23  Pedro Alves  <pedro@codesourcery.com>

        PR gdb/9664:
        * infrun.c (normal_stop): Tag threads as stopped, and run the
        hook-stop before printing the stack frame.

2009-01-22  Pedro Alves  <pedro@codesourcery.com>

        PR c++/9631:
        * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
        vbasetype.

2009-01-20  Kazu Hirata  <kazu@codesourcery.com>

        * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
        unsigned long.

2009-01-20  Daniel Jacobowitz  <dan@codesourcery.com>

        PR gdb/9346
        * infcmd.c (signal_command): Do not specify a resume PC.

2009-01-19  Doug Evans  <dje@google.com>

        * dummy-frame.c (dummy_frame): Replace regcache member with
        caller_state.
        (dummy_frame_push): Replace caller_regcache arg with caller_state.
        All callers updated.
        (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
        (dummy_frame_pop): Rewrite.  Verify requested frame is in the
        dummy frame stack.  Restore program state.
        (cleanup_dummy_frames): Rewrite.
        (dummy_frame_sniffer): Update.  Make static.
        * dummy-frame.h (regcache,frame_info): Delete forward decls.
        (inferior_thread_state): New forward decl.
        (dummy_frame_push): Update prototype.
        * frame.c (frame_pop): dummy_frame_pop now does all the work for
        DUMMY_FRAMEs.
        * infcall.c (breakpoint_auto_delete_contents): Delete.
        (get_function_name,run_inferior_call): New fns.
        (call_function_by_hand): Simplify by moving some code to
        get_function_name, run_inferior_call.  Inferior function call wrapped
        in TRY_CATCH so there's less need for cleanups and all exits from
        proceed are handled similarily.  Detect program exit.
        Detect program stopping in a different thread.
        Make error messages more consistent.
        * inferior.h (inferior_thread_state): Declare (opaque type).
        (save_inferior_thread_state,restore_inferior_thread_state,
        make_cleanup_restore_inferior_thread_state,
        discard_inferior_thread_state, get_inferior_thread_state_regcache):
        Declare.
        (save_inferior_status): Update prototype.
        * infrun.c: (normal_stop): When stopped for the completion of an
        inferior function call, verify the expected stack frame kind.
        (inferior_thread_state): New struct.
        (save_inferior_thread_state,restore_inferior_thread_state,
        do_restore_inferior_thread_state_cleanup,
        make_cleanup_restore_inferior_thread_state,
        discard_inferior_thread_state,
        get_inferior_thread_state_regcache): New functions.
        (inferior_status): Move stop_signal, stop_pc, registers to
        inferior_thread_state.  Remove restore_stack_info.
        (save_inferior_status): Remove arg restore_stack_info.
        All callers updated.  Remove saving of state now saved by
        save_inferior_thread_state.
        (restore_inferior_status): Remove restoration of state now done by
        restore_inferior_thread_state.
        (discard_inferior_status): Remove freeing of registers, now done by
        discard_inferior_thread_state.

2009-01-18  Pedro Alves  <pedro@codesourcery.com>

        * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
        at a time, times NUM_TO_SCROLL.
        * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
        fetch the selected frame if there is no stack.

2009-01-18  Pedro Alves  <pedro@codesourcery.com>

        PR gdb/9747:
        * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
        Declare.
        * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
        * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
        is thrown while handling an event, finish the thread state.
        (normal_stop): Use finish_thread_state cleanup.
        * infcmd.c (run_command_1): If an error is thrown while starting
        the inferior, finish the thread state.

2009-01-18  Pedro Alves  <pedro@codesourcery.com>

        * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
        skip breakpoints without a location (pending breakpoints).

2009-01-18  Pedro Alves  <pedro@codesourcery.com>

        PR build/9186:
        * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.

2009-01-18  Nick Roberts  <nickrob@snap.net.nz>

        * thread.c (thread_command): Move call to annotate_thread_changed
        to...
        (do_captured_thread_select): ... here, to avoid printing an
        annotation if the thread change generates an exception.

2009-01-16  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Document x86_64/MinGW as a new native configuration.

2009-01-16  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Move the documentation of "info os processes" to
        the appropriate section (documenting the new commands).

2009-01-15  Doug Evans  <dje@google.com>

        * target.h (target_signal_to_string): Make return type const char *.
        (target_signal_to_name): Ditto.
        (target_signal_from_name): Make arg const char *.
        * infrun.c (sig_print_info): Update.
        * signals/signals.c (signals): Make array and struct members const.
        (target_signal_to_string): Make return type const char *.
        (target_signal_to_name): Ditto.
        (target_signal_from_name): Make arg const char *.

2009-01-15  Ulrich Weigand  <uweigand@de.ibm.com>
            Tristan Gingold  <gingold@adacore.com>

        * solist.h (struct target_so_ops): New member bfd_open.
        (solib_find): Add prototype.
        (solib_bfd_fopen): Add prototype.
        * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
        from solib_bfd_open.
        (solib_bfd_open): Use ops->bfd_open override if present.  Call
        solib_find and solib_bfd_open otherwise.

        * objfiles.h (OBJF_KEEPBFD): New define.
        * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
        objfile flag is set.
        * solib.c (symbol_add_stub): Do not allocate second BFD for
        shared library; use OBJF_KEEPBFD flag on solib objfile.

2009-01-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * frame.c (get_frame_arch): Abort if called with NULL this_frame.

2009-01-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * value.h (address_of_variable): Add prototype.
        (locate_var_value): Remove prototype.

        * findvar.c (read_var_value): Do not attempt to default frame
        to selected frame.
        (locate_var_value): Remove function.
        * valops.c (value_of_variable): Retrieve selected frame for
        symbols that require a frame when called with NULL block.
        * valops.c (address_of_variable): New function.

        * eval.c (evaluate_subexp_for_address): Call address_of_variable
        instead of calling locate_var_value.
        (evaluate_subexp_with_coercion): Likewise.

2009-01-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * NEWS: Document "define" for prefixed commands.
        * cli/cli-cmds.c (show_user): Update calls to show_user_1.  Call
        show_user_1 for prefix commands.
        * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
        * cli/cli-script.c (validate_comname): Rewrite to handle prefix
        commands.  Return the containing command list.
        (define_command, document_command): Update to handle prefix commands.
        (show_user_1): Add prefix and name arguments.  Handle prefix
        commands.
        * cli/cli-script.h (show_user_1): Update prototype.

2009-01-14  Kai Tietz  <kai.tietz@onevision.com>

        * mingw-ser.c (console_select_thread): Add return to make
        compiler happy.
        (pipe_select_thread): Likewise.
        (file_select_thread): Likewise.

2009-01-14  Pedro Alves  <pedro@codesourcery.com>

        * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
        previous change.

2009-01-14  Pedro Alves  <pedro@codesourcery.com>

        * remote.c (extended_remote_mourn_1): Invalidate our notion of
        current general thread.

2009-01-14  Pedro Alves  <pedro@codesourcery.com>

        * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
        without a live selected thread.

2009-01-14  Joel Brobecker  <brobecker@adacore.com>

        Update the copyright notice of some of the files I missed
        in the previous copyright update.

2009-01-14  Joel Brobecker  <brobecker@adacore.com>

        * windows-nat.c (handle_unload_dll): Use %p to print the DLL
        base address instead of casting it to DWORD.

2009-01-13  Ulrich Weigand  <uweigand@de.ibm.com>

        * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
        for NULL frame pointers.

2009-01-13  Mark Kettenis  <kettenis@gnu.org>

        * utils.c (host_address_to_string): Reimplement in a way that
        avoids the cast of the address to long.

2009-01-13  Joel Brobecker  <brobecker@adacore.com>

        * mdebugread.c (parse_symbol): Save the symbol private data
        using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
        (psymtab_to_symtab_1): Likewise.
        (parse_procedure): Declare variable "e" only in the scope
        where it is used. Extract the symbol private data using
        SYMBOL_VALUE_BYTES.

2009-01-13  Jim Blandy  <jimb@codesourcery.com>

        Abstract out common code for copying value locations.

        * value.h (set_value_component_location): New declaration.
        * value.c (set_value_component_location): New function.
        (value_primitive_field): Use it.
        * valarith.c (value_subscript, value_subscripted_rvalue): Same.
        * valops.c (search_struct_field, value_slice): Same.
        * ada-lang.c (coerce_unspec_val_to_type)
        (ada_value_primitive_packed_val): Same.

2009-01-13  Joel Brobecker  <brobecker@adacore.com>

        * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.

2009-01-12  Christopher Faylor  <me+cygwin@cgf.cx>

        * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
        throughout.
        * i386-cygwin-tdep.c: Ditto.
        * i386-windows-nat.c: Ditto.
        * windows-nat.h: Ditto.
        * windows-tdep.c: Ditto.
        * windows-tdep.h: Ditto.
        * windows-nat.c: Ditto.
        (cygwin_load_start): Redefine as CORE_ADDR.
        (cygwin_load_end): Ditto.
        (windows_make_so): Coerce result of address arithmetic to uintptr_t
        before coercing to CORE_ADDR to avoid a compiler warning.
        (handle_exception): Define addr as CORE_ADDR and coerce
        ExceptionAddress to uintptr_t before assigining to avoid a compiler
        warning.
        * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
        files.

2009-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix linking with --enable-targets=all:
        * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
        (HFILES_NO_SRCDIR): Add windows-tdep.h.
        (ALLDEPFILES): Add windows-tdep.c.

2009-01-11  Chris Faylor  <me.gdb@cgf.cx>

        * win32-nat.h: Delete.
        * windows-nat.h: Rename from win32-nat.h.
        * win32-nat.c: Delete.
        * windows-nat.c: Rename from win32-nat.c.
        * win32-termcap.c: Delete.
        * windows-termcap.c: Rename from win32-termcap.c.
        * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
        * configure.ac: Handle rename from win32-termcap.c ->
        windows-termcap.c.
        * configure: Regenerate.
        * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
        -> windows-termcap.c.
        * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
        windows-tdep.h.
        * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
        * windows-nat.c: Ditto.  Also reflect rename from from win32-tdep.h ->
        windows-tdep.h.
        (win32_make_so): Handle cygwin compiler warning due to change of
        load_addr from DWORD to LPVOID.
        (handle_load_dll): Use %p in format string to properly print address
        and avoid a compiler warning.
        (DEBUG_EXCEPTION_SIMPLE): Ditto.
        (handle_exception): Ditto.
        * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
        * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
        windows-nat.o.
        * config/i386/mingw.mh: Ditto.
        * config/i386/mingw64.mh: Ditto.

2009-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
        arrayprint_recurse_level to a parameter.  Update all the callers.  New
        comment at autovariables.

2009-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
        coding style.

2009-01-11  Joel Brobecker  <brobecker@adacore.com>

        * target.c (target_xfer_partial): Use host_address_to_string to
        print the address of readbuf and writebuf. Cast the address of
        elements inside the myaddr buffer into intptr_t.
        (deprecated_debug_xfer_memory): Use paddress to print memaddr.
        Cast the address of elements inside the myaddr buffer into
        intptr_t.

2009-01-11  Joel Brobecker  <brobecker@adacore.com>

        * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
        * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
        * configure.host, configure.tgt: Add handling for x86_64/windows.
        * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
        and amd64-windows-tdep.c.

2009-01-11  Joel Brobecker  <brobecker@adacore.com>

        * win32-tdep.h, win32-tdep.c: New files.
        * i386-cygwin-tdep.h: Delete.
        * i386-cygwin-tdep.c: Include win32-tdep.h instead of
        i386-cygwin-tdep.h.
        (win32_xfer_shared_library): Delete.  Moved to win32-tdep.c.
        * win32-nat.c: Likewise.
        * configure.tgt: Add win32-tdep.o to the list of target object
        files for i386-cygwin and i386-mingw targets.

2009-01-11  Joel Brobecker  <brobecker@adacore.com>

        * win32-nat.h: New file.
        * win32-nat.c (mappings): Initialize to NULL.
        (win32_set_context_register_offsets): New function.
        * i386-windows-nat.c: New file.
        (mappings): Moved here from win32-nat.c.
        (_initialize_i386_windows_nat): New function.
        * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
        * config/i386/cygwin.mh (NATDEPFILES): Likewise.

2009-01-09  Andreas Schwab  <schwab@suse.de>

        * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.

2009-01-09  Daniel Jacobowitz  <dan@codesourcery.com>

        * gdbtypes.c (append_composite_type_field): Correct the location of
        appended fields.

2009-01-09  Pedro Alves  <pedro@codesourcery.com>

        * defs.h (deprecated_error_hook): Delete declaration.
        * interps.c (clear_interpreter_hooks): Adjust.
        * remote-sim.c (gdb_os_error): Don't try to call
        deprecated_error_hook.  No need to call exit anymore.
        * top.c (deprecated_error_hook): Delete.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

        * arch-utils.c (gdbarch_update_p): Use host_address_to_string
        to print the address of the gdbarch pointer.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

        * gdbarch.sh: Fix all the compilation errors on amd64-windows
        due to casting a pointer to a long when printing a function
        address. Instead, use host_address_to_string to convert our
        address to a string.
        * gdbarch.c: Regenerate.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

        * event-top.c (async_disconnect, async_stop_sig): use "raise"
        instead of "kill" to raise a signal.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

        * win32-nat.c (get_module_name): Change the type of parameter
        "base_address" to LPVOID.  Remove unnecessary cast.
        (struct lm_info): Change type of load_addr to LPVOID.
        (win32_make_so): Change the type of parameter "load_addr"
        to LPVOID.  Remove some unnecessary casts.
        (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
        (win32_xfer_shared_libraries): Add missing cast.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

        * win32-nat.c (has_detach_ability, set_process_privilege):
        Cast the result of GetProcAddress to (void *) to avoid
        a compilation warning.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

        * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
        already defined.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

        * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
        definition of local variable "done".
        (info_w32_command, handle_exception): Remove unnecessary cast.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

        * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
        DebugSetProcessKillOnExit.  Update all uses in this file.
        (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
        Update all uses in this file.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

        * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
        and use it when pushing the target.
        (win32_attach, win32_create_inferior): Update call to
        do_initial_win32_stuff.
        (win32_detach, win32_mourn_inferior): Use our ops parameter
        instead of the global win32_ops to unpush the target.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

        * ser-mingw.c (ser_windows_open): Use proper type when casting
        in call to _open_osfhandle.

2009-01-09  Kai Tietz  <kai.tietz@onevision.com>

        * coff-pe-read.c (read_pe_exported_syms): Fix typo.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

        * CONTRIBUTE: Minor reformatting.

2009-01-08  Kai Tietz  <kai.tietz@onevision.com>

        * MAINTAINERS: Add myself to Write After Approval.
        * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
        export directory.

2009-01-08  Nathan Froyd  <froydnj@codesourcery.com>

        * remote-sim.c (gdb_os_error): Mark as a noreturn function.
        Call exit to make it obvious to GCC.

2009-01-08  Tom Tromey  <tromey@redhat.com>

        PR breakpoints/9350:
        * varobj.c (varobj_invalidate): Unconditionally free
        all_rootvarobj.
        * symfile.c (syms_from_objfile): Free local_addr when returning
        normally.
        * exec.c (exec_file_attach): Do cleanups before returning.
        (exec_file_command): Likewise.
        * corefile.c (reopen_exec_file): Do cleanups before returning.
        * breakpoint.c (insert_breakpoint_locations): Do cleanups before
        returning.
        (do_vec_free): New function.
        (update_global_location_list): Make a cleanup for old_locations.
        Do cleanups before returning.  Remove unused variable 'e'.
        (find_condition_and_thread): Free result of parsing the
        expression.
        (print_it_typical): Do cleanups before returning.
        (breakpoint_re_set_one): Always free sals.sals.

2009-01-08  Joel Brobecker  <brobecker@adacore.com>
            Emi Suzuki  <emi-suzuki@tjsys.co.jp>

        * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
        watchpoints.

2009-01-07  Doug Evans  <dje@google.com>

        * top.c (gdb_prompt_string): Delete, unused.

2009-01-07  Pedro Alves  <pedro@codesourcery.com>

        Delete ONE_PROCESS_WRITETEXT leftovers.

        * breakpoint.c (insert_bp_location): Delete process_warning
        argument.  Adjust.
        (insert_breakpoint_locations): Adjust.
        (reattach_breakpoints): Adjust.
        * infrun.c (normal_stop): Drop "It might be running in another
        process" notice.

2009-01-07  Stan Shebs  <stan@codesourcery.com>

        * config/pa/linux.mh (XDEPFILES): Remove.

2009-01-07  Doug Evans  <dje@google.com>

        * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.

2009-01-07  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
        spacing, a regression from 2008-04-22.

2009-01-07  Joel Brobecker  <brobecker@adacore.com>

        * utils.c (gdb_print_host_address): Adjust implementation to
        reuse host_address_to_string. Move comment explaining the conversion
        from host address to string from here...
        (host_address_to_string): ... to there.

2009-01-07  Emi Suzuki  <emi-suzuki@tjsys.co.jp>

        * MAINTAINERS: Add myself for write after approval privileges.

2009-01-06  Tom Tromey  <tromey@redhat.com>

        * value.c (set_internalvar): Use value_free, not xfree.

2009-01-06  Jim Blandy  <jimb@red-bean.com>

        Check return values of functions declared with warn_unused_result
        attribute in GLIBC 2.8.
        * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
        * inflow.c (check_syscall): New function.
        (new_tty): Use check_syscall to check return values from open and dup.
        * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
        * main.c (captured_main): Call cwd after setting up gdb_stderr;
        check for errors from getcwd.
        * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
        * ui-file.c (stdio_file_write): Ignore return value from fwrite.
        (stdio_file_fputs): Same.
        * utils.c (internal_vproblem): abort if last-ditch error message
        write fails.

        * top.c (gdb_init): Don't set the current directory here; that's
        already been done in captured_main.

2009-01-06  Sandra Loosemore  <sandra@codesourcery.com>

        * ser-tcp.c: Adjust includes.
        (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
        (tcp_auto_retry, tcp_retry_limit): Declare.
        (TIMEOUT): Remove, in favor of tcp_retry_limit.
        (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
        (wait_for_connect): New function.
        (net_open): Use it.  Add auto-retry logic.
        (set_tcp_cmd, show_tcp_cmd): New functions.
        (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
        and "set/show tcp connect-timeout" commands.
        * NEWS: Document new commands.

2009-01-05  Tom Tromey  <tromey@redhat.com>

        * python/python-internal.h (Py_ssize_t): Define as int.

2009-01-05  Jim Blandy  <jimb@red-bean.com>

        * MAINTAINERS: Fix my e-mail address as steering committee member.

2009-01-03  Joel Brobecker  <brobecker@adacore.com>

        Updated copyright notices for most files.

2009-01-03  Joel Brobecker  <brobecker@adacore.com>

        * top.c (print_gdb_version): Update copyright year.

2009-01-03  Joel Brobecker  <brobecker@adacore.com>

        * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.

2009-01-01  Pedro Alves  <pedro@codesourcery.com>

        PR breakpoints/9681:
        * exceptions.h (enum errors): New error type, MEMORY_ERROR.
        * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
        * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
        retrow all other exceptions.

For older changes see ChangeLog-2008.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: