1 2015-07-13 Andrew Burgess <andrew.burgess@embecosm.com>
3 * tui/tui-win.c (window_name_completer): New function.
4 (focus_completer): Call window_name_completer. All old content
5 moved into window_name_completer.
6 (winheight_completer): New function.
7 (_initialize_tui_win): Rename variable. Add completer to
8 winheight command. Update doc string on winheight.
10 2015-07-12 Sandra Loosemore <sandra@codesourcery.com>
12 * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Register
13 all nios2 mach variants.
15 2015-07-10 Kevin Buettner <kevinb@redhat.com>
17 * rx-tdep.c (rx_get_opcode_byte): Use target_read_code instead
18 of target_read_memory.
20 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
22 * tui/tui-win.c (tui_set_win_height): Use a cleanup to free the
24 (parse_scrolling_args): Likewise.
26 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
28 * tui/tui-win.c (focus_completer): Don't duplicate the tui window
29 names in this function.
31 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
33 * tui/tui-data.h (SRC_NAME): Convert to lower case.
35 (DATA_NAME): Likewise.
36 (DISASSEM_NAME): Likewise.
37 * tui/tui-win.c (tui_set_focus): Window names are now lower case.
38 (tui_set_win_height): Likewise.
39 (parse_scrolling_args): Likewise.
41 2015-07-10 Markus Metzger <markus.t.metzger@intel.com>
43 * record-btrace.c (record_btrace_goto_begin)
44 (record_btrace_goto_end, record_btrace_goto): Move call to
46 (record_btrace_set_replay): ... here. Set stop_pc.
47 * record-full.c (record_full_goto_entry): Set stop_pc.
49 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
51 * NEWS: Mention support for tracepoints on aarch64-linux.
53 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
55 * linux-aarch64-low.c (aarch64_supports_tracepoints): New
57 (the_low_target): Install it.
59 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
61 * gdb.trace/backtrace.exp: Set registers for aarch64 target.
62 * gdb.trace/collection.exp: Likewise.
63 * gdb.trace/mi-trace-frame-collected.exp: Likewise.
64 * gdb.trace/mi-trace-unavailable.exp: Likewise.
65 * gdb.trace/report.exp: Likewise.
66 * gdb.trace/trace-break.exp: Likewise.
67 * gdb.trace/unavailable.exp: Likewise.
68 * gdb.trace/while-dyn.exp: Likewise.
70 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
72 * aarch64-tdep.c: Add ax.h and ax-gdb.h includes.
73 (aarch64_gen_return_address): New function.
74 (aarch64_gdbarch_init): Hook it.
76 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
78 * aarch64-tdep.c (aarch64_make_stub_cache): Set available_p and
79 swallow NOT_AVAILABLE_ERROR.
80 (aarch64_stub_this_id): Call frame_id_build_unavailable_stack if
81 available_p is not set.
82 (aarch64_stub_frame_unwind_stop_reason): New function.
83 (aarch64_stub_unwind): Install it.
85 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
87 * aarch64-tdep.c (aarch64_prologue_cache) <available_p>: New
89 (aarch64_make_prologue_cache_1): New function, factored out from
90 aarch64_make_prologue_cache. Do not allocate cache. Set
92 (aarch64_make_prologue_cache): Reimplement wrapping
93 aarch64_make_prologue_cache_1, and swallowing
95 (aarch64_prologue_frame_unwind_stop_reason): New function.
96 Return UNWIND_UNAVAILABLE if available_p is not set.
97 (aarch64_prologue_unwind): Install it.
98 (aarch64_prologue_this_id): Move prev_pc and prev_sp limit
99 checks into aarch64_prologue_frame_unwind_stop_reason. Call
100 frame_id_build_unavailable_stack if available_p is not set.
102 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
104 * aarch64-tdep.c (aarch64_prologue_cache) <func, prev_pc>: New
106 (aarch64_scan_prologue): Set prev_pc.
107 (aarch64_make_prologue_cache): Set func.
108 (aarch64_make_stub_cache): Set prev_pc.
109 (aarch64_prologue_this_id): Remove local variables id, pc and
110 func. Read prev_pc and func from cache.
111 (aarch64_stub_this_id): Read prev_pc from cache.
113 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
115 * aarch64-tdep.c (aarch64_make_stub_cache): Update comment. New
116 argument this_cache. Remove unused local variables reg and
117 unwound_fp. Return early if this_cache is already set. Set
119 (aarch64_stub_this_id): Update call to aarch64_make_stub_cache.
121 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
123 * aarch64-tdep.c (aarch64_make_prologue_cache): Update comment.
124 New argument this_cache. Return early if this_cache is already
126 (aarch64_prologue_this_id): Update call to
127 aarch64_make_prologue_cache.
128 (aarch64_prologue_prev_register): Likewise.
129 (aarch64_normal_frame_base): Likewise.
131 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
133 * c-valprint.c (c_val_print): Factor out memberptr printing code
134 from c_val_print to ...
135 (c_val_print_memberptr): ... this new function.
137 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
139 * c-valprint.c (c_val_print): Factor out int printing code to ...
140 (c_val_print_int): ... this new function.
142 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
144 * c-valprint.c (c_val_print): Factor out struct and union
146 (c_val_print_struct): ... this new function ...
147 (c_val_print_union): ... and this new function.
149 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
151 * c-valprint.c (c_val_print): Factor out pointer printing code
153 (c_val_print_ptr): ... this new function.
155 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
157 * c-valprint.c (c_valprint): Factor our array printing code from
159 (c_val_print_array): ... this new function.
161 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
163 * c-valprint.c (c_val_print): Factor out pointer printing code
165 (print_unpacked_pointer): ... this new function.
167 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
169 * c-valprint.c (c_val_print): Remove an assignment to i and move
172 2015-07-09 Yao Qi <yao.qi@linaro.org>
174 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Add
175 argument ptid. Update comments. Caller update.
177 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
179 * btrace.c (pt_print_packet): Print stop, vmcs, tma, mtc, cyc, and
182 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
184 * btrace.c (btrace_pt_readmem_callback): Change type of PC argument.
186 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
188 * progspace.c (delete_program_space): Add missing spaces.
190 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
192 * inferior.c (delete_inferior_1): Rename to ...
193 (delete_inferior): ..., remove 'silent' parameter, delete
194 program space when unused and remove call to prune_program_spaces.
195 Remove the old, unused, delete_inferior.
196 (delete_inferior_silent): Remove.
197 (prune_inferiors): Change call from delete_inferior_1 to
198 delete_inferior and remove 'silent' parameter. Remove call to
199 prune_program_spaces.
200 (remove_inferior_command): Idem.
201 * inferior.h (delete_inferior_1): Rename to...
202 (delete_inferior): ..., remove 'silent' parameter and remove the
203 original delete_inferior.
204 (delete_inferior_silent): Remove.
205 * mi/mi-main.c (mi_cmd_remove_inferior): Change call from
206 delete_inferior_1 to delete_inferior and remove 'silent'
208 * progspace.c (prune_program_spaces): Remove.
209 (pspace_empty_p): Rename to...
210 (program_space_empty_p): ... and make non-static.
211 (delete_program_space): New.
212 * progspace.h (prune_program_spaces): Remove declaration.
213 (program_space_empty_p): New declaration.
214 (delete_program_space): New declaration.
215 * monitor.c (monitor_close): Replace call to
216 delete_thread_silent and delete_inferior_silent with
217 discard_all_inferiors.
219 2015-07-08 Patrick Palka <patrick@parcs.ath.cx>
221 * defs.h (deprecated_register_changed_hook): Remove prototype.
222 * interps.c (clear_iterpreter_hooks): Remove reference to
223 deprecated_register_changed_hook.
224 * top.c (deprecated_register_changed_hook): Remove prototype.
225 * valops.c (value_assign): Remove reference to
226 deprecated_register_changed_hook.
227 * tui/tui-hooks.c (tui_register_changed): Add parameter "frame".
228 Add comment documenting the function.
229 (tui_register_changed_observer): Define.
230 (tui_install_hooks): Remove reference to
231 deprecated_register_changed_hook. Set
232 tui_register_changed_observer.
233 (tui_remove_hooks): Remove reference to
234 deprecated_register_changed_hook. Unset
235 tui_register_changed_observer.
237 2015-07-08 Jan Kratochvil <jan.kratochvil@redhat.com>
240 * compile/compile-c-types.c (insert_type): Change gdb_assert to error.
242 2015-07-08 Robert O'Callahan <robert@ocallahan.org>
245 * ax-gdb.c (gen_conversion): Extend to 'to' bits, not 'from'.
247 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
249 * MAINTAINERS (Write After Approval): Add Markus T. Metzger.
251 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
253 * nat/linux-btrace.c (kernel_supports_bts, kernel_supports_pt):
254 Use safe_strerror() instead of strerror().
256 2015-07-07 Yao Qi <yao.qi@linaro.org>
258 * features/arm-with-m-fpa-layout.xml: Set architecture to arm.
259 * features/arm-with-m-fpa-layout.c: Regenerated.
260 * features/arm-with-m-vfp-d16.xml: Likewise.
261 * features/arm-with-m-vfp-d16.c: Regenerated.
262 * features/arm-with-m.xml: Likewise.
263 * features/arm-with-m.c: Regenerated.
264 * features/arm-with-neon.xml: Likewise.
265 * features/arm-with-neon.c: Regenerated.
266 * features/arm-with-vfpv2.xml: Likewise.
267 * features/arm-with-vfpv2.c: Regenerated.
268 * features/arm-with-vfpv3.xml: Likewise.
269 * features/arm-with-vfpv3.c: Regenerated.
271 2015-07-07 Yao Qi <yao.qi@linaro.org>
273 * aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from
275 * aarch64-linux-nat.c: Include aarch32-linux-nat.h and
277 (fetch_gregs_from_thread): Call aarch32_gp_regcache_supply
279 (store_gregs_to_thread): Call aarch32_gp_regcache_collect
281 (fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply
283 (store_fpregs_to_thread): Call aarch32_vfp_regcache_collect
285 (tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare.
286 (aarch64_linux_read_description): Return the right target
288 * arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h.
289 * config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
290 * configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and
293 2015-07-07 Yao Qi <yao.qi@linaro.org>
295 * aarch32-linux-nat.c: New file.
296 * aarch32-linux-nat.h: New file.
297 * arm-linux-nat.c: Include aarch32-linux-nat.h.
298 (fetch_regs): Move code to aarch32-linux-nat.c. Call
299 aarch32_gp_regcache_supply.
300 (store_regs): Move code to aarch32-linux-nat.c. Call
301 aarch32_gp_regcache_collect.
302 (fetch_vfp_regs): Move code to aarch32-linux-nat.c. Call
303 aarch32_vfp_regcache_supply.
304 (store_vfp_regs): Move code to aarch32-linux-nat.c. Call
305 aarch32_vfp_regcache_collect.
306 * config/arm/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
308 2015-07-07 Yao Qi <yao.qi@linaro.org>
310 * arm-linux-nat.c (store_fpregister): Remove.
311 (store_register): Likewise.
312 (fetch_fpregister): Likewise.
313 (fetch_register): Likewise.
314 (arm_linux_store_inferior_registers): Call store_regs and
315 store_fpregs instead.
316 (arm_linux_fetch_inferior_registers): Call fetch_fpregs and
319 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
321 * doc/gdb.texinfo (TUI): Restructure documentation on TUI layout
324 2015-07-06 Joel Brobecker <brobecker@adacore.com>
326 * NEWS: Create a new section for the next release branch.
327 Rename the section of the current branch, now that it has
330 2015-07-06 Joel Brobecker <brobecker@adacore.com>
332 GDB 7.10 branch created (66c4b3e8a628a207bc6aafef6af0c4128195f56e):
333 * version.in: Bump version to 7.10.50.DATE-cvs.
335 2015-07-06 Luis Machado <lgustavo@codesourcery.com>
337 * breakpoint.c (remove_breakpoint_1): Don't handle permanent
338 breakpoints in a special way.
339 (remove_breakpoint): Likewise.
340 (mark_breakpoints_out): Likewise.
342 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
344 * doc/gdb.texinfo (TUI): Add comma after @xref.
346 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
348 * tui/tui-win.c (tui_set_focus): Use structure member 'generic'
349 instead of casting the structure type.
351 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
353 * valops.c (search_struct_field): Remove OFFSET parameter.
354 (value_cast_structs): Adjust calls to search_struct_field.
355 (value_struct_elt): Same.
356 (find_overload_match): Same.
358 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
360 * value.c (value_fetch_lazy): Update comment, change return
362 * value.h (value_fetch_lazy): Change return value to void.
364 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
366 * tui/tui-data.c (tui_partial_win_by_name): Window name is const.
367 (tui_win_name): Make parameter and result const.
368 * tui/tui-data.h (tui_win_name): Make parameter and result const.
370 2015-07-06 Patrick Palka <patrick@parcs.ath.cx>
372 * i386-tdep.c (i386_mpx_info_bounds): Don't call error, instead
373 use printf_unfiltered.
374 (set_mpx_cmd): Add missing trailing space to command string
376 (_initialize_i386_tdep): Give the "mpx" prefix command its
379 2015-07-02 Kevin Buettner <kevinb@redhat.com>
381 * rx-tdep.c (RX_USP_REGNUM, RX_BPC_REGNUM): New constants.
382 (enum rx_frame_type): New.
383 (struct rx_prologue): Add new field `frame_type'.
384 (rx_analyze_prologue): Add `frame_type' parameter. Cache this
385 parameter in the prologue struct. Add code for recording
386 locations of PC and PSW for fast interrupt and exception frames.
387 (rx_skip_prologue): Adjust call to rx_analyze_prologue.
388 (rx_analyze_frame_prologue): Add `frame_type' parameter.
389 (rx_frame_type): New function.
390 (rx_frame_base): Fetch frame type and pass it to rx_analyze_prologue.
391 (rx_frame_this_id): Rename parameter `this_prologue_cache' to
393 (rx_frame_prev_register): Rename parameter `this_prologue_cache' to
394 `this_cache'. Add cases for RX_FRAME_TYPE_EXCEPTION and
395 RX_FRAME_TYPE_FAST_INTERRUPT.
396 (normal_frame_p, exception_frame_p, rx_frame_sniffer_common)
397 (rx_frame_sniffer, rx_exception_sniffer): New functions.
398 (rx_frame_unwind): Use rx_frame_sniffer instead of
399 default_frame_sniffer.
400 (rx_frame_unwind): New unwinder.
401 (rx_gdbarch_init): Register new unwinder.
403 2015-07-02 Kevin Buettner <kevinb@redhat.com>
405 * rx-tdep.c (RX_BPSW_REGNUM, RX_FPSW_REGNUM): New constants.
406 (struct gdbarch_tdep): Add fields rx_psw_type and rx_fpsw_type.
407 (rx_register_type): Add cases for RX_PSW_REGNUM, RX_BPSW_REGNUM,
409 (rx_gdbarch_init): Initialize PSW, BPSW, and FPSW flags types.
411 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
413 Fix GCC false warning.
414 * s390-linux-tdep.c (s390_handle_arg): Initialize VAL.
416 2015-07-02 Yao Qi <yao.qi@linaro.org>
418 * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Fix
419 typo in the debugging message.
421 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
423 * btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h.
424 (maint_btrace_cmdlist, maint_btrace_set_cmdlist)
425 (maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist)
426 (maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad)
427 (btrace_maint_clear): New.
428 (btrace_fetch, btrace_clear): Call btrace_maint_clear.
429 (pt_print_packet, btrace_maint_decode_pt)
430 (btrace_maint_update_pt_packets, btrace_maint_update_packets)
431 (btrace_maint_print_packets, get_uint, get_context_size, no_chunk)
432 (maint_btrace_packet_history_cmd)
433 (maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd)
434 (maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd)
435 (maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd)
436 (maint_info_btrace_cmd, _initialize_btrace): New.
437 * btrace.h (btrace_pt_packet, btrace_pt_packet_s)
438 (btrace_maint_packet_history, btrace_maint_info): New.
439 (btrace_thread_info) <maint>: New.
442 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
444 * btrace.c (btrace_fetch): Append the new trace data.
445 (btrace_clear): Clear the stored trace data.
446 * btrace.h (btrace_thread_info) <data>: New.
447 * common/btrace-common.h (btrace_data_clear)
448 (btrace_data_append): New.
449 * common/btrace-common.c (btrace_data_clear)
450 (btrace_data_append): New.
452 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
454 * nat/linux-btrace.c (linux_enable_bts): Check for
456 Check for data_offset and data_size fields. Use them.
458 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
460 * NEWS: Announce new commands "record btrace pt" and "record pt".
461 Announce new options "set|show record btrace pt buffer-size".
462 * btrace.c: Include "rsp-low.h".
463 Include "inttypes.h".
464 (btrace_add_pc): Add forward declaration.
465 (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
466 (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
467 (btrace_compute_ftrace_pt): New.
468 (btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
469 (check_xml_btrace_version): Update version check.
470 (parse_xml_raw, parse_xml_btrace_pt_config_cpu)
471 (parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
472 (btrace_pt_config_cpu_attributes, btrace_pt_config_children)
473 (btrace_pt_children): New.
474 (btrace_children): Add support for "pt".
475 (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
476 (btrace_conf_children): Add support for "pt".
477 * btrace.h: Include "intel-pt.h".
478 (btrace_pt_error): New.
479 * common/btrace-common.c (btrace_format_string, btrace_data_fini)
480 (btrace_data_empty): Support BTRACE_FORMAT_PT.
481 * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
482 (struct btrace_config_pt): New.
483 (struct btrace_config)<pt>: New.
484 (struct btrace_data_pt_config, struct btrace_data_pt): New.
485 (struct btrace_data)<pt>: New.
486 * features/btrace-conf.dtd (btrace-conf)<pt>: New.
488 * features/btrace.dtd (btrace)<pt>: New.
489 (pt, pt-config, cpu): New.
490 * nat/linux-btrace.c (perf_event_read, perf_event_read_all)
491 (perf_event_pt_event_type, kernel_supports_pt)
492 (linux_supports_pt): New.
493 (linux_supports_btrace): Support BTRACE_FORMAT_PT.
494 (linux_enable_bts): Free tinfo on error.
495 (linux_enable_pt): New.
496 (linux_enable_btrace): Support BTRACE_FORMAT_PT.
497 (linux_disable_pt): New.
498 (linux_disable_btrace): Support BTRACE_FORMAT_PT.
499 (linux_fill_btrace_pt_config, linux_read_pt): New.
500 (linux_read_btrace): Support BTRACE_FORMAT_PT.
501 * nat/linux-btrace.h (struct btrace_tinfo_pt): New.
502 (struct btrace_target_info)<pt>: New.
503 * record-btrace.c (set_record_btrace_pt_cmdlist)
504 (show_record_btrace_pt_cmdlist): New.
505 (record_btrace_print_pt_conf): New.
506 (record_btrace_print_conf): Support BTRACE_FORMAT_PT.
507 (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
508 (cmd_record_btrace_pt_start): New.
509 (cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
510 (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
511 (_initialize_record_btrace): Add new commands.
512 * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
513 (remote_protocol_features): Add "Qbtrace:pt".
514 Add "Qbtrace-conf:pt:size".
515 (remote_supports_btrace): Support BTRACE_FORMAT_PT.
516 (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
517 (remote_enable_btrace): Support BTRACE_FORMAT_PT.
518 (_initialize_remote): Add new commands.
520 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
522 * configure.ac: check for libipt
523 * configure: Regenerate.
524 * config.in: Regenerate.
525 * Makefile.in (LIBIPT): New.
526 (CLIBS): Add $LIBIPT.
527 * NEWS: document new configure options
529 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
531 * compile/compile-object-load.c (compile_object_load): Replace debug
532 message "lookup undefined ELF symbol" by 3 more specific messages.
534 2015-07-01 Kevin Buettner <kevinb@redhat.com>
536 * rl78-tdep.c (struct gdbarch_tdep): Add new field, rl78_psw_type.
537 (rl78_register_type): Add case for RL78_PSW_REGNUM.
538 (rl78_gdbarch_init): Initialize rl78_psw_type.
540 2015-07-01 Patrick Palka <patrick@parcs.ath.cx>
542 * tui/tui-hooks.c (tui_refresh_frame_and_register_information):
543 Update commentary. Always refresh the registers when frame
544 information has changed.
545 * tui/tui-stack.c (tui_show_frame_info): Update commentary.
546 Change return type to int. Return 1 if frame information has
547 changed, 0 otherwise.
548 (tui_before_prompt): Update commentary.
549 * tui/tui-stack.h (tui_show_frame_info): Change return type to
552 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
555 * frame.c (select_frame): Remove reference to
556 deprecated_selected_frame_level_changed_hook.
557 * frame.h (deprecated_selected_frame_level_changed_hook): Remove
559 * stack.c (deprecated_selected_frame_level_changed_hook):
561 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook):
563 (tui_refresh_frame_and_register_information): ... this. Bail
564 out if there is no stack. Don't update register information
565 unless registers_too_p is true.
566 (tui_print_frame_info_listing_hook): Rename to ...
567 (tui_dummy_print_frame_info_listing_hook): ... this.
568 (tui_before_prompt): New function.
569 (tui_normal_stop): New function.
570 (tui_before_prompt_observer): New observer.
571 (tui_normal_stop_observer): New observer.
572 (tui_install_hooks): Set
573 deprecated_print_frame_info_listing_hook to
574 tui_dummy_print_frame_info_listing_hook. Register
575 tui_before_prompt_observer to call tui_before_prompt and
576 tui_normal_stop_observer to call tui_normal_stop. Remove
577 reference to deprecated_selected_frame_level_changed_hook.
578 (tui_remove_hooks): Detach and unset tui_before_prompt_observer
579 and tui_normal_stop_observer. Remove reference to
580 deprecated_selected_frame_level_changed_hook.
582 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
585 * tui/tui-stack.c (tui_set_locator_info): Change prototype to
586 return an int instead of void. Return whether the locator
588 (tui_show_frame_info): If the locator info has not changed, then
589 bail out early to avoid refreshing the windows.
591 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
593 * tui/tui-stack.c (tui_set_locator_info): Explicitly pass
594 LOCATOR_WIN to tui_alloc_content.
596 2015-06-30 Yao Qi <yao.qi@linaro.org>
599 * arm-tdep.c (arm_get_next_pc_raw): Break for media
602 2015-06-29 Kevin Buettner <kevinb@redhat.com>
604 * rx-tdep.c (RX_PSW_REGNUM): New enum constant.
605 (rx_dwarf_reg_to_regnum): New function.
606 (rx_gdbarch_init): Register rx_dwarf_reg_to_regnum. Use dwarf2
609 2015-06-29 Pedro Alves <palves@redhat.com>
612 * infcall.c (run_inferior_call): On infcall success, if the thread
613 was marked stopped before, reset it back to stopped.
614 * infrun.c (resume): Don't suppress the set_running calls when
616 (normal_stop): Only discard the finish_thread_state cleanup if the
619 2015-06-29 Pierre Langlois <pierre.langlois@arm.com>
621 * MAINTAINERS (Write After Approval): Update my email address.
623 2015-06-26 Keith Seitz <keiths@redhat.com>
624 Doug Evans <dje@google.com>
627 * block.c (block_lookup_symbol): For non-function blocks,
628 continue to search for a symbol with an exact domain match
629 Otherwise, return any previously found "best domain" symbol.
630 (block_lookup_symbol_primary): Likewise.
632 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
634 * NEWS: Mention the new option "history remove-duplicates".
635 * top.c (history_remove_duplicates): New static variable.
636 (show_history_remove_duplicates): New static function.
637 (gdb_add_history): Conditionally remove duplicate history
639 (init_main): Add "history remove-duplicates" option.
641 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
643 * tui/tui-win.c (focus_completer): New static function.
644 (_initialize_tui_win): Set the completion function of the
645 "focus" command to focus_completer.
647 2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
649 * linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
651 * symtab.c (find_function_start_sal): Likewise.
653 2015-06-25 Gary Benson <gbenson@redhat.com>
655 * solib.c (solib_find_1): Set local variable sysroot to NULL if
656 it is the empty string after trailing slashes have been stripped.
658 2015-06-25 Gary Benson <gbenson@redhat.com>
660 * exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
661 * infrun.c (follow_exec): Likewise.
662 * remote.c (remote_filesystem_is_local): Likewise.
663 * solib.c (solib_find_1): Likewise.
665 2015-06-24 Keith Seitz <keiths@redhat.com>
667 * build-id.c (build_id_to_debug_bfd): Add cleanup to free
668 return value from lrealpath.
670 2015-06-24 Mike Frysinger <vapier@gentoo.org>
672 * remote-sim.c (gdbsim_open): Move sysroot update to the top.
674 2015-06-24 Mike Frysinger <vapier@gentoo.org>
676 * remote-sim.c: Include gdb_bfd.h.
677 (gdbsim_open): Declare new local sysroot pointing to gdb_sysroot.
678 Skip TARGET_SYSROOT_PREFIX in gdb_sysroot when it is active.
680 2015-06-24 Yao Qi <yao.qi@linaro.org>
682 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
683 set_gdbarch_get_siginfo_type.
684 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
685 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
686 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
687 * m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
688 * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
689 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
690 * tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
691 * linux-tdep.c (linux_get_siginfo_type): Change it to static.
692 (linux_init_abi): Call set_gdbarch_get_siginfo_type.
693 * linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
695 2015-06-24 Gary Benson <gbenson@redhat.com>
697 * common/buffer.c (stdint.h): Do not include.
698 * common/print-utils.c (stdint.h): Likewise.
699 * compile/compile-c-symbols.c (gdb_assert.h): Likewise.
700 * compile/compile-c-types.c (gdb_assert.h): Likewise.
701 * ft32-tdep.c (gdb_assert.h): Likewise.
702 * guile/scm-utils.c (stdint.h): Likewise.
703 * i386-linux-tdep.c (stdint.h): Likewise.
704 * i386-tdep.c (stdint.h): Likewise.
705 * nat/linux-btrace.c (stdint.h): Likewise.
706 * nat/linux-btrace.h (stdint.h): Likewise.
707 * nat/linux-ptrace.c (stdint.h): Likewise.
708 * nat/mips-linux-watch.h (stdint.h): Likewise.
709 * ppc-linux-nat.c (stdint.h): Likewise.
710 * python/python-internal.h (stdint.h): Likewise.
711 * stub-termcap.c (stdlib.h): Likewise.
712 * target/target.h (stdint.h): Likewise.
713 * xtensa-linux-nat.c (stdint.h): Likewise.
715 2015-06-23 Patrick Palka <patrick@parcs.ath.cx>
717 * top.c (init_history): Look at errno after calling strtol to
718 properly map large GDBHISTSIZE values to infinity.
720 2015-06-23 Doug Evans <dje@google.com>
722 * inferior.h (struct inferior_suspend_state): Delete, unused.
723 All references deleted.
725 2015-06-23 Mike Frysinger <vapier@gentoo.org>
727 * microblaze-tdep.c (microblaze_push_dummy_code): Delete.
728 (microblaze_push_dummy_call): Likewise.
729 (microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
730 and set_gdbarch_push_dummy_call.
732 2015-06-23 Yao Qi <yao.qi@linaro.org>
734 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
735 Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
736 (amd64_linux_store_inferior_registers): Likewise.
737 * arm-linux-nat.c (fetch_fpregister): Likewise.
738 (fetch_fpregs, store_fpregister): Likewise.
739 (store_fpregister, store_fpregs): Likewise.
740 (fetch_register, fetch_regs): Likewise.
741 (store_register, store_regs): Likewise.
742 (fetch_vfp_regs, store_vfp_regs): Likewise.
743 (arm_linux_read_description): Check have_ptrace_getregset is
744 TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
746 * i386-linux-nat.c (fetch_xstateregs): Check
747 have_ptrace_getregset is not TRIBOOL_TRUE.
748 (store_xstateregs): Likewise.
749 * linux-nat.c (have_ptrace_getregset): Change its type to
751 * linux-nat.h (tribool): New enum.
752 * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
753 Check whether have_ptrace_getregset is TRIBOOL_TRUE.
755 2015-06-19 Doug Evans <dje@google.com>
757 * NEWS: Mention Sun's version of stabs is no longer supported.
758 * elfread.c (free_elfinfo): Delete. All uses updated.
759 (elfstab_offset_sections): Delete. All uses updated.
760 * gdb-stabs.h (stab_section_info): Delete. All uses updated.
761 * psympriv.h (partial_symtab) <section_offsets>: Delete.
763 * psymtab.c (start_psymtab_common): Delete arg section_offsets.
766 2015-06-18 Simon Marchi <simon.marchi@ericsson.com>
768 * common/rsp-low.c (needs_escaping): New.
769 (remote_escape_output): Add unit_size parameter. Refactor to
770 support multi-byte addressable units. Rename parameters.
771 * common/rsp-low.h (remote_escape_output): Add unit_size
772 parameter and rename others. Update doc.
773 * remote.c (align_for_efficient_write): New.
774 (remote_write_bytes_aux): Add unit_size parameter and use it.
775 Rename some variables. Update doc.
776 (remote_xfer_partial): Get unit size and use it.
777 (remote_read_bytes_1): Add unit_size parameter and use it.
778 Rename some variables. Update doc.
779 (remote_write_bytes): Same.
780 (remote_xfer_live_readonly_partial): Same.
781 (remote_read_bytes): Same.
782 (remote_flash_write): Update call to remote_write_bytes_aux.
783 (remote_write_qxfer): Update call to remote_escape_output.
784 (remote_search_memory): Same.
785 (remote_hostio_pwrite): Same.
787 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
789 * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
790 locations as inserted.
791 Update and expand comment about permanent locations.
792 (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
793 Move comment to add_location_to_breakpoint.
794 (update_global_location_list): Don't error out if a permanent
795 breakpoint is not marked inserted.
796 Don't error out if a non-permanent breakpoint location is inserted on
797 top of a permanent breakpoint.
799 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
801 * breakpoint.c (make_breakpoint_permanent): Remove unused
803 * breakpoint.h (make_breakpoint_permanent): Remove declaration.
805 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
808 * NEWS: Mention new GDBHISTSIZE behavior.
809 * top.c (init_history): For null or out-of-range GDBHISTSIZE,
810 set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
812 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
814 * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
815 * top.c (init_history): Read from GDBHISTSIZE instead of
817 (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
819 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
821 * top.c (gdb_safe_append_history): Do not call
822 history_truncate_file if the history is not stifled.
824 2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
826 * syscalls/s390-linux.xml: Add syscalls 344 through 354.
827 * syscalls/s390x-linux.xml: Likewise.
829 2015-06-16 Michael Eager <eager@eagercon.com>
831 * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
833 2015-06-16 Patrick Palka <patrick@parcs.ath.cx>
835 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
836 target_terminal_ours_for_output() before calling
837 tui_show_frame_info(), and restore the original terminal
840 2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
842 * arm-linux-nat.c: Include nat/linux-ptrace.h.
844 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
846 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
848 (mi_cmd_data_write_memory_bytes): Same.
850 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
852 * corefile.c (write_memory): Update doc.
853 * gdbcore.h (write_memory): Same.
855 2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
857 * linux-tdep.c (enum filterflags): Make it from anonymous enum.
858 (dump_mapping_p): Use it for parameter filterflags.
859 (linux_find_memory_regions_full): Use it for variable filterflags.
861 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
862 Jan Kratochvil <jan.kratochvil@redhat.com>
864 Merge multiple hex conversions.
865 * monitor.c: Include rsp-low.h.
866 (fromhex): Remove definition.
868 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
869 Jan Kratochvil <jan.kratochvil@redhat.com>
871 Move utility functions to common/.
872 * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
873 Move defs to common/common-utils.c.
874 * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
875 (skip_to_space_const): Move decls to common/common-utils.h.
876 * common/common-defs.h: Move include of common-types.h before
878 * common/common-utils.c: Include host-defs.h and ctype.h.
879 (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
881 (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
883 * common/common-utils.h (strtoulst): Move decl from utils.h.
884 (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
885 Move from cli/cli-utils.h.
886 * common/host-defs.h: Include limits.h.
887 (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
888 (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
889 * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
890 common/common-utils.h.
891 * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
892 (strtoulst): Move to common/common-utils.c.
893 * utils.h (strtoulst): Moved decl to common/common-utils.h.
895 2015-06-15 Yao Qi <yao.qi@linaro.org>
897 * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
899 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
901 * build-id.c: Don't include elf-bfd.h.
902 (build_id_bfd_get): Use bfd_build_id.
903 (build_id_verify): Ditto.
905 (find_separate_debug_file_by_buildid): Ditto.
906 * python/py-objfile.c: Don't include elf-bfd.h.
907 (objfpy_get_build_id) Use bfd_build_id.
908 (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
909 * coffread.c: Include build-id.h.
910 (coff_symfile_read): Try find_separate_debug_file_by_buildid.
912 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
914 * windows-nat.c (do_windows_fetch_inferior_registers)
915 (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
916 conditional with __CYGWIN__.
918 2015-06-13 Andrew Burgess <andrew.burgess@embecosm.com>
920 * completer.c: Add arch-utils.h include.
921 (enum reg_completer_targets): New enum.
922 (reg_or_group_completer_1): New function containing old
923 reg_or_group_completer, add and use new parameter to control what
924 is completed on. Use get_current_arch rather than architecture of
925 currently selected frame.
926 (reg_or_group_completer): Call new reg_or_group_completer_1.
927 (reggroup_completer): Call new reg_or_group_completer_1.
928 * completer.h (reggroup_completer): Add declaration.
929 * tui/tui-regs.c: Add 'completer.h' include.
930 (tui_reg_next_command): Renamed to...
931 (tui_reg_next): ...this. Adjust parameters and return rather than
933 (tui_reg_prev_command): Renamed to...
934 (tui_reg_prev): ...this. Adjust parameters and return rather than
936 (tui_reg_float_command): Delete.
937 (tui_reg_general_command): Delete.
938 (tui_reg_system_command): Delete.
939 (tui_reg_command): Rewrite to perform switching of register group.
941 (tuireglist): Remove.
942 (tui_reggroup_completer): New function.
943 (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
944 creation of 'tui reg' command.
945 * NEWS: Add comment about 'tui reg' changes.
947 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
949 * target.c (target_read): Consider addressable unit size when
950 reading from a memory object.
951 (read_memory_robust): Same.
952 (read_whatever_is_readable): Same.
953 (target_write_with_progress): Consider addressable unit size
954 when writing to a memory object.
955 * target.h (target_read): Update documentation.
956 (target_write): Add documentation.
958 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
960 * arch-utils.h (default_addressable_memory_unit_size): New.
961 * arch-utils.c (default_addressable_memory_unit_size): New.
962 * gdbarch.sh (addressable_memory_unit_size): New.
963 * gdbarch.h: Re-generate.
964 * gdbarch.c: Re-generate.
966 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
968 * target.c (target_read): Rename variables and use
970 (target_read_with_progress): Same.
971 (read_memory_robust): Constify parameters and rename
973 (read_whatever_is_readable): Constify parameters,
974 rename variables, adjust formatting.
975 * target.h (read_memory_robust): Constify parameters.
977 2015-06-12 Ulrich Weigand <uweigand@de.ibm.com>
979 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
980 synthetic (non-AltiVec) vector types.
981 (ppc64_sysv_abi_return_value): Likewise.
983 2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
986 * breakpoint.c (create_breakpoint): Save extra_string for
989 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
991 * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
992 and bt_mask to CORE_ADDR.
994 2015-06-11 Gary Benson <gbenson@redhat.com>
996 * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
997 (mnsh_recv_message): Likewise.
999 2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
1001 * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
1002 long long int and plongest instead of %ll.
1004 2015-06-11 Gary Benson <gbenson@redhat.com>
1006 * nat/linux-namespaces.c (gdb_wait.h): New include.
1007 (sys/wait.h): Do not include.
1009 2015-06-10 Simon Marchi <simon.marchi@ericsson.com>
1011 * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
1012 end_sequence is true.
1014 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1017 * solib-target.c (library_list_start_list): Use explicit NULL
1020 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1022 * solib-target.c (library_list_start_list): Do not dereference
1023 variable version in its initialization. Make the VERSION check handle
1025 (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
1027 2015-06-10 Gary Benson <gbenson@redhat.com>
1029 * NEWS: Announce support for direct access of executable and
1030 shared library files when attaching to inferiors in containers
1031 on GNU/Linux systems.
1033 2015-06-10 Gary Benson <gbenson@redhat.com>
1035 * remote.c (struct remote_state) <fs_pid>: New field.
1036 (new_remote_state): Initialize the above.
1037 (PACKET_vFile_setfs): New enum value.
1038 (remote_hostio_set_filesystem): New function.
1039 (remote_hostio_open): Call the above.
1040 (remote_hostio_unlink): Likewise.
1041 (remote_hostio_readlink): Likewise.
1042 (_initialize_remote): Register new "set/show remote
1043 hostio-setfs-packet" command.
1044 * NEWS: Announce new vFile:setfs packet.
1046 2015-06-10 Gary Benson <gbenson@redhat.com>
1048 * linux-nat.c (nat/linux-namespaces.h): New include.
1049 (fileio.h): Likewise.
1050 (linux_nat_filesystem_is_local): New function.
1051 (linux_nat_fileio_pid_of): Likewise.
1052 (linux_nat_fileio_open): Likewise.
1053 (linux_nat_fileio_readlink): Likewise.
1054 (linux_nat_fileio_unlink): Likewise.
1055 (linux_nat_add_target): Initialize to_filesystem_is_local,
1056 to_fileio_open, to_fileio_readlink and to_fileio_unlink.
1057 (_initialize_linux_nat): New "set/show debug linux-namespaces"
1059 * NEWS: Mention new "set/show debug linux-namespaces" commands.
1061 2015-06-10 Gary Benson <gbenson@redhat.com>
1063 * target.h (struct inferior): New forward declaration.
1064 (struct target_ops) <to_filesystem_is_local>: Update comment.
1065 (struct target_ops) <to_fileio_open>: New argument inf.
1066 Update comment. All implementations updated.
1067 (struct target_ops) <to_fileio_unlink>: Likewise.
1068 (struct target_ops) <to_fileio_readlink>: Likewise.
1069 (target_filesystem_is_local): Update comment.
1070 (target_fileio_open): New argument inf. Update comment.
1071 (target_fileio_unlink): Likewise.
1072 (target_fileio_readlink): Likewise.
1073 (target_fileio_read_alloc): Likewise.
1074 (target_fileio_read_stralloc): Likewise.
1075 * target.c (target_fileio_open): New argument inf.
1076 Pass inf to implementation. Update debug printing.
1077 (target_fileio_unlink): Likewise.
1078 (target_fileio_readlink): Likewise.
1079 (target_fileio_read_alloc_1): New argument inf. Pass inf
1080 to target_fileio_open.
1081 (target_fileio_read_alloc): New argument inf. Pass inf to
1082 target_fileio_read_alloc_1.
1083 (target_fileio_read_stralloc): Likewise.
1084 * gdb_bfd.c (inferior.h): New include.
1085 (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
1086 argument with new argument "inferior". Pass inferior to
1088 (gdb_bfd_open): Supply inferior argument to
1089 gdb_bfd_iovec_fileio_open.
1090 * linux-tdep.c (linux_info_proc): Supply inf argument to
1091 relevant target_fileio calls.
1092 (linux_find_memory_regions_full): Likewise.
1093 (linux_fill_prpsinfo): Likewise.
1094 * remote.c (remote_filesystem_is_local): Supply inf
1095 argument to remote_hostio_open.
1096 (remote_file_put): Likewise.
1097 (remote_file_get): Likewise.
1098 (remote_file_delete): Supply inf argument to
1099 remote_hostio_unlink.
1101 2015-06-10 Gary Benson <gbenson@redhat.com>
1103 * inf-child.c (inf_child_fileio_open): Replace comment.
1104 (inf_child_fileio_pwrite): Likewise.
1105 (inf_child_fileio_pread): Likewise.
1106 (inf_child_fileio_fstat): Insert blank line before comment.
1107 (inf_child_fileio_close): Replace comment.
1108 (inf_child_fileio_unlink): Likewise.
1109 (inf_child_fileio_readlink): Likewise.
1110 * remote.c (remote_hostio_open): Likewise.
1111 (remote_hostio_pread): Likewise.
1112 (remote_hostio_pwrite): Likewise.
1113 (remote_hostio_close): Likewise.
1114 (remote_hostio_unlink): Likewise.
1115 (remote_hostio_readlink): Likewise.
1116 (remote_hostio_fstat): Likewise.
1117 (remote_filesystem_is_local): Likewise.
1118 * target.c (target_fileio_open): Likewise.
1119 (target_fileio_pwrite): Likewise.
1120 (target_fileio_pread): Likewise.
1121 (target_fileio_fstat): Insert blank line before comment.
1122 (target_fileio_close): Replace comment.
1123 (target_fileio_unlink): Likewise.
1124 (target_fileio_readlink): Likewise.
1125 (target_fileio_read_alloc): Likewise.
1126 (target_fileio_read_stralloc): Likewise.
1128 2015-06-10 Gary Benson <gbenson@redhat.com>
1130 * linux-thread-db.c (nat/linux-namespaces.h): New include.
1131 (check_pid_namespace_match): Use linux_ns_same rather than
1132 linux_proc_pid_get_ns to spot PID namespace mismatches.
1133 * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
1134 * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
1136 2015-06-10 Gary Benson <gbenson@redhat.com>
1138 * configure.ac (AC_CHECK_FUNCS): Add setns.
1139 * config.in: Regenerate.
1140 * configure: Likewise.
1141 * nat/linux-namespaces.h: New file.
1142 * nat/linux-namespaces.c: Likewise.
1143 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
1144 (linux-namespaces.o): New rule.
1145 * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
1146 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
1147 * config/arm/linux.mh (NATDEPFILES): Likewise.
1148 * config/i386/linux.mh (NATDEPFILES): Likewise.
1149 * config/i386/linux64.mh (NATDEPFILES): Likewise.
1150 * config/ia64/linux.mh (NATDEPFILES): Likewise.
1151 * config/m32r/linux.mh (NATDEPFILES): Likewise.
1152 * config/m68k/linux.mh (NATDEPFILES): Likewise.
1153 * config/mips/linux.mh (NATDEPFILES): Likewise.
1154 * config/pa/linux.mh (NATDEPFILES): Likewise.
1155 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
1156 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
1157 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
1158 * config/s390/linux.mh (NATDEPFILES): Likewise.
1159 * config/sparc/linux.mh (NATDEPFILES): Likewise.
1160 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
1161 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
1162 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
1164 2015-06-10 Gary Benson <gbenson@redhat.com>
1166 * utils.h (make_cleanup_close): Moved to common/filestuff.h.
1167 * utils.c (do_close_cleanup): Moved to common/filestuff.c.
1168 (make_cleanup_close): Likewise.
1169 * common/filestuff.h (make_cleanup_close): Moved from utils.h.
1170 * common/filestuff.c (do_close_cleanup): Moved from utils.c.
1171 (make_cleanup_close): Likewise.
1173 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
1175 * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
1176 from SuspendThread().
1178 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
1180 * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
1181 from OutputDebugString.
1183 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
1184 Mircea Gherzan <mircea.gherzan@intel.com>
1186 * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
1187 MPX_BT_MASK_32): New macros.
1188 (i386_mpx_set_bounds): New function that implements
1189 the command "set-mpx-bound".
1190 (i386_mpx_enabled): Helper function to test MPX availability.
1191 (i386_mpx_bd_base): Helper function to calculate the base directory
1193 (i386_mpx_get_bt_entry): Helper function to access a bound
1195 (i386_mpx_print_bounds): Effectively display bound information.
1196 (_initialize_i386_tdep): Add new commands to commands "set mpx" and
1198 (_initialize_i386_tdep):
1199 Add "bound" to the commands "show mpx" and "set mpx" commands.
1200 (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
1201 and "show mpx" commands.
1202 * NEWS: List new commands for MPX support.
1204 2015-06-09 Gary Benson <gbenson@redhat.com>
1206 * common/fileio.h (fileio_to_host_mode): New declaration.
1207 * common/fileio.c (fileio_to_host_mode): New Function.
1208 * inf-child.c (inf_child_fileio_open): Process mode argument
1209 with fileio_to_host_mode.
1211 2015-06-09 Gary Benson <gbenson@redhat.com>
1213 * common/fileio.c (fileio_mode_pack): Fix preprocessor
1216 2015-06-05 Gary Benson <gbenson@redhat.com>
1218 * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
1219 * remote.c (remote_filesystem_is_local): ...here.
1221 2015-06-04 Yao Qi <yao.qi@linaro.org>
1223 * gdbarch.c: Regenerate it.
1225 2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
1227 * arch-utils.c (default_infcall_munmap): New.
1228 * arch-utils.h (default_infcall_munmap): New declaration.
1229 * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
1230 (munmap_list_free, munmap_listp_free_cleanup): New.
1231 (struct setup_sections_data): Add field munmap_list_headp.
1232 (setup_sections): Call munmap_list_add.
1233 (compile_object_load): New variable munmap_list_head, initialize
1234 setup_sections_data.munmap_list_headp, return munmap_list_head.
1235 * compile/compile-object-load.h (struct munmap_list): New declaration.
1236 (struct compile_module): Add field munmap_list_head.
1237 (munmap_list_free): New declaration.
1238 * compile/compile-object-run.c (struct do_module_cleanup): Add field
1240 (do_module_cleanup): Call munmap_list_free.
1241 (compile_object_run): Pass munmap_list_head to do_module_cleanup.
1242 * gdbarch.c: Regenerate.
1243 * gdbarch.h: Regenerate.
1244 * gdbarch.sh (infcall_munmap): New.
1245 * linux-tdep.c (linux_infcall_munmap): New.
1246 (linux_init_abi): Install it.
1248 2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
1251 * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
1253 2015-06-02 Yao Qi <yao.qi@linaro.org>
1255 * i386-linux-nat.c: Include linux-nat.h.
1257 2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
1258 Jan Kratochvil <jan.kratochvil@redhat.com>
1261 * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
1263 * dwarf2loc.c (chain_candidate): Likewise.
1265 2015-06-01 Yao Qi <yao.qi@linaro.org>
1267 * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
1268 (store_vfp_regs): Use PTRACE_SETREGSET.
1270 2015-06-01 Yao Qi <yao.qi@linaro.org>
1272 * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
1273 (fetch_fpregs): Likewise.
1274 * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
1275 (store_fpregs): Likewise.
1277 2015-06-01 Yao Qi <yao.qi@linaro.org>
1279 * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
1280 (fetch_regs): Likewise.
1281 (store_regs): Use PTRACE_SETREGSET.
1282 (store_register): Likewise.
1284 2015-06-01 Yao Qi <yao.qi@linaro.org>
1286 * arm-linux-nat.c (arm_linux_read_description): Check whether
1287 kernel supports PTRACE_GETREGSET.
1289 2015-06-01 Yao Qi <yao.qi@linaro.org>
1291 * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
1292 * linux-nat.c: ... here.
1293 * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
1295 * linux-nat.h: ... here.
1297 2015-06-01 Yao Qi <yao.qi@linaro.org>
1299 * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
1300 * i386-linux-nat.c: Likewise.
1301 * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
1302 * s390-linux-nat.c: Include "nat/linux-ptrace.h".
1303 (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
1304 * x86-linux-nat.c: Include "nat/linux-ptrace.h".
1305 * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
1307 2015-05-30 Eli Zaretskii <eliz@gnu.org>
1309 * go32-nat.c (go32_xfer_memory): Fix the return value to be
1310 compatible to what read_child and write_child return. This
1311 unbreaks that DJGPP build of GDB which was broken since v7.7.
1313 2015-05-29 Martin Galvan <martin.galvan@tallertechnologies.com>
1315 * MAINTAINERS (Write After Approval): Add Martin Galvan.
1317 2015-05-29 Roland McGrath <mcgrathr@google.com>
1320 * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
1321 rather than internal_error for an unrecognized value.
1323 2015-05-29 Max Filippov <jcmvbkbc@gmail.com>
1325 * xtensa-tdep.c (xtensa_pseudo_register_read)
1326 (xtensa_pseudo_register_write): Don't alias last pseudo register
1329 2015-05-28 Don Breazeal <donb@codesourcery.com>
1331 * infrun.c (follow_fork_inferior): Ensure the use of
1332 process-style ptids (pid,0,0) in verbose/debug "Detaching"
1335 2015-05-28 Doug Evans <dje@google.com>
1337 * dwarf2read.c (record_line_ftype): Remove, duplicate.
1339 2015-05-28 Yao Qi <yao.qi@linaro.org>
1341 * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
1342 (arm_linux_fetch_inferior_registers): Use
1343 tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
1344 (arm_linux_store_inferior_registers): Likewise.
1345 (arm_linux_read_description): Don't set
1346 arm_linux_has_wmmx_registers.
1347 * arm-tdep.c (arm_gdbarch_init): Set
1348 tdep->have_wmmx_registers according target descriptions.
1349 * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
1352 2015-05-28 Yao Qi <yao.qi@linaro.org>
1354 * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
1355 (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
1356 instead of arm_linux_vfp_register_count.
1357 (store_vfp_regs): Likewise.
1358 (arm_linux_fetch_inferior_registers): Likewise.
1359 (arm_linux_store_inferior_registers): Likewise.
1360 (arm_linux_read_description): Don't set
1361 arm_linux_vfp_register_count.
1362 * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
1364 * arm-tdep.c (arm_gdbarch_init): Add assert on
1366 * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
1367 field to vfp_register_count. All users updated.
1369 2015-05-28 Kyle Huey <me@kylehuey.com> (tiny patch)
1371 * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
1372 ELFOSABI_GNU binaries.
1374 2015-05-27 Doug Evans <dje@google.com>
1376 * dwarf2read.c (lnp_state_machine): New typedef.
1377 (lnp_reader_state): New typedef.
1378 (dwarf_record_line_1): Renamed from dwarf_record_line.
1379 All callers updated.
1380 (dwarf_record_line): New function.
1381 (init_lnp_state_machine): New function.
1382 (check_line_address): Replace p_record_line parameter with state.
1383 All callers updated.
1384 (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
1385 Update to record state in lnp_state_machine.
1387 2015-05-27 Doug Evans <dje@google.com>
1389 * dwarf2read.c (record_line_ftype): New typedef.
1390 (check_line_address): New function.
1391 (dwarf_decode_lines_1): Call it.
1393 2015-05-27 Doug Evans <dje@google.com>
1395 * NEWS: Mention "set debug dwarf-line".
1396 * dwarf2read.c (dwarf_line_debug): New static global.
1397 (add_include_dir): Add debug dwarf-line support.
1398 (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
1399 (_initialize_dwarf2_read): New parameter "debug dwarf-line".
1401 2015-05-27 Doug Evans <dje@google.com>
1403 * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
1404 All callers updated.
1405 (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
1406 * cp-support.h (cp_lookup_nested_symbol): Update.
1408 2015-05-27 Doug Evans <dje@google.com>
1411 * block.c (block_find_symbol): New function.
1412 (block_find_non_opaque_type): Ditto.
1413 (block_find_non_opaque_type_preferred): Ditto.
1414 * block.h (block_symbol_matcher_ftype): New typedef.
1415 (block_find_symbol): Declare.
1416 (block_find_non_opaque_type): Ditto.
1417 (block_find_non_opaque_type_preferred): Ditto.
1418 * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
1419 * psymtab.c (psym_lookup_symbol): Ditto.
1420 * symtab.c (basic_lookup_transparent_type_1): New function.
1421 (basic_lookup_transparent_type): Call it.
1423 2015-05-27 Yao Qi <yao.qi@linaro.org>
1425 * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
1426 AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
1428 2015-05-27 Yao Qi <yao.qi@linaro.org>
1430 * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
1432 (aarch64_record_load_store): Likewise.
1434 2015-05-26 Doug Evans <dje@google.com>
1436 PR c++/18141, c++/18417.
1437 * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
1440 2015-05-26 Doug Evans <dje@google.com>
1442 * NEWS: Add entries for command renamings.
1443 * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
1445 (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated.
1446 (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
1448 (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
1449 All callers updated. Fix spelling of DWARF in help text.
1450 (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
1452 (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
1454 (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated.
1455 (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated.
1456 (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
1458 (show_dwarf_always_disassemble): Renamed from
1459 show_dwarf2_always_disassemble. All callers updated.
1460 (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
1461 "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to
1462 "set/show dwarf max-cache-age". Rename
1463 "set/show dwarf2 always-disassemble" to
1464 "set/show dwarf always-disassemble". Rename
1465 "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename
1466 "set/show debug dwarf2-die" to "set/show debug dwarf-die".
1468 2015-05-26 Doug Evans <dje@google.com>
1471 * python/py-lazy-string.c (stpy_convert_to_value): Use
1472 gdbpy_gdb_memory_error not PyExc_MemoryError.
1473 (gdbpy_create_lazy_string_object): Ditto.
1475 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
1477 * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
1479 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
1481 * tui/tui-regs.c (tui_reg_prev_command): New function.
1482 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
1483 * reggroups.c (reggroup_prev): New function.
1484 * reggroups.h (reggroup_prev): Add declaration. Update comment.
1486 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
1487 Yao Qi <yao.qi@linaro.org>
1489 * aarch64-linux-tdep.c: Include linux-record.h and
1491 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
1492 (aarch64_syscall): New enum.
1493 (aarch64_canonicalize_syscall): New function.
1494 (aarch64_all_but_pc_registers_record): New function.
1495 (aarch64_linux_syscall_record): New function.
1496 (aarch64_linux_init_abi): Install AArch64 process record
1497 handler. Update to handle syscall recording.
1498 * aarch64-tdep.c: Include record.h and record-full.h.
1499 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
1500 (struct aarch64_mem_r): Define.
1501 (aarch64_record_result): New enum.
1502 (struct insn_decode_record): Define.
1503 (insn_decode_record): New typedef.
1504 (aarch64_record_data_proc_reg): New function.
1505 (aarch64_record_data_proc_imm): New function.
1506 (aarch64_record_branch_except_sys): New function.
1507 (aarch64_record_load_store): New function.
1508 (aarch64_record_data_proc_simd_fp): New function.
1509 (aarch64_record_asimd_load_store): New function.
1510 (aarch64_record_decode_insn_handler): New function.
1511 (deallocate_reg_mem): New function.
1512 (aarch64_process_record): New function.
1513 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
1515 (aarch64_process_record): New extern declaration.
1516 * configure.tgt: Add linux-record.o to gdb_target_obs.
1517 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
1519 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
1521 * NEWS: Add a note on process record-replay support on aarch64*-linux*
1524 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
1526 * amd64-tdep.c: Replace in_function_epilogue_p with
1527 stack_frame_destroyed_p throughout.
1528 * arch-utils.c: Ditto.
1529 * arch-utils.h: Ditto.
1530 * arm-tdep.c: Ditto.
1531 * breakpoint.c: Ditto.
1532 * gdbarch.sh: Ditto.
1533 * hppa-tdep.c: Ditto.
1534 * i386-tdep.c: Ditto.
1535 * mips-tdep.c: Ditto.
1536 * nios2-tdep.c: Ditto.
1537 * rs6000-tdep.c: Ditto.
1538 * s390-linux-tdep.c: Ditto.
1539 * score-tdep.c: Ditto.
1541 * sparc-tdep.c: Ditto.
1542 * sparc-tdep.h: Ditto.
1543 * sparc64-tdep.c: Ditto.
1544 * spu-tdep.c: Ditto.
1545 * tic6x-tdep.c: Ditto.
1546 * tilegx-tdep.c: Ditto.
1547 * xstormy16-tdep.c: Ditto.
1548 * gdbarch.c, gdbarch.h: Re-generated.
1550 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
1552 * NEWS: Mention 'tui enable' and 'tui disable'.
1553 * tui/tui.c (tui_enable_command): New function.
1554 (tui_disable_command): New function.
1555 (_initialize_tui): New function.
1557 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1559 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
1561 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1563 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
1566 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1568 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
1570 (tui_set_layout_for_display_command): ...here, before calling
1571 tui_set_layout. Only set the layout if gdb has not already
1572 entered the TUI_FAILURE state.
1574 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1576 * tui/tui-layout.c (layout_completer): New function.
1577 (_initialize_tui_layout): Set completer on layout command.
1579 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
1581 * tui/tui-layout.c (tui_set_layout): Remove
1582 tui_register_display_type parameter. Remove all checking of this
1583 parameter, and reindent function. Update header comment.
1584 (tui_set_layout_for_display_command): Rename to...
1585 (tui_set_layout_by_name): ...this, and don't check for different
1586 register class types, don't pass a tui_register_display_type to
1587 tui_set_layout. Update header comment.
1588 (layout_names): Remove register set specific names.
1589 * tui/tui-layout.h (tui_set_layout): Remove
1590 tui_register_display_type parameter.
1591 * tui/tui.c (tui_rl_change_windows): Don't pass a
1592 tui_register_display_type to tui_set_layout.
1593 (tui_rl_delete_other_windows): Likewise.
1594 (tui_enable): Likewise.
1595 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
1596 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
1597 (TUI_GENERAL_REGS_NAME): Remove.
1598 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
1599 (TUI_SPECIAL_REGS_NAME): Remove.
1600 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
1601 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
1602 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
1603 (enum tui_register_display_type): Remove.
1604 (struct tui_layout_def): Remove regs_display_type and
1605 float_regs_display_type fields.
1606 (struct tui_data_info): Remove regs_display_type field.
1607 (tui_layout_command): Use new name for
1608 tui_set_layout_for_display_command.
1609 * tui/tui-data.c (layout_def): Don't initialise removed fields.
1610 (tui_clear_win_detail): Don't initialise removed fields of
1612 * tui/tui-regs.c (tui_show_registers): Use new name for
1613 tui_set_layout_for_display_command.
1614 * tui/tui.h (tui_set_layout_for_display_command): Rename
1616 (tui_set_layout_by_name): ...this.
1617 * printcmd.c (display_command): Remove tui related layout call,
1620 2015-05-20 Joel Brobecker <brobecker@adacore.com>
1622 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
1623 (handle_inferior_event): New function.
1625 2015-05-20 Joel Brobecker <brobecker@adacore.com>
1627 * ada-lang.c (to_fixed_array_type): Rename local variable
1628 typename into type_name.
1630 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1632 Fix ASAN crash for gdb.compile/compile.exp.
1633 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
1635 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1637 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
1638 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
1639 * compile/compile-object-load.c (setup_sections, compile_object_load):
1641 * compile/compile.c (compile_to_object): Likewise.
1643 2015-05-16 Doug Evans <xdje42@gmail.com>
1645 * NEWS: Mention support for unbuffered Guile memory ports.
1646 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
1647 (ioscm_lseek_address): Improve overflow calculation.
1648 (gdbscm_memory_port_fill_input): Add assert.
1649 (gdbscm_memory_port_write): Handle unbuffered ports.
1650 Handle large writes identical to Guile's fport_write.
1651 (gdbscm_memory_port_seek): Fix seeking past end check.
1652 (gdbscm_memory_port_close): Handle closing unbuffered port.
1653 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
1654 (ioscm_init_memory_port): Handle unbuffered ports.
1655 (ioscm_reinit_memory_port): Ditto.
1656 (ioscm_init_memory_port): Update size calculation.
1657 (gdbscm_open_memory): Support zero sized ports.
1659 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1661 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
1662 variable compiler warnings.
1664 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1666 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
1668 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1669 Phil Muldoon <pmuldoon@redhat.com>
1671 * NEWS (Changes since GDB 7.9): Add compile print.
1672 * compile/compile-c-support.c (add_code_header, add_code_footer)
1673 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
1674 COMPILE_I_PRINT_VALUE_SCOPE.
1675 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
1676 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
1678 * compile/compile-object-load.c: Include block.h.
1679 (get_out_value_type): New function.
1680 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
1681 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
1683 * compile/compile-object-load.h (struct compile_module): Add fields
1684 out_value_addr and out_value_type.
1685 * compile/compile-object-run.c: Include valprint.h and compile.h.
1686 (struct do_module_cleanup): Add fields out_value_addr and
1688 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
1689 COMPILE_I_PRINT_VALUE_SCOPE.
1690 (compile_object_run): Propagate out_value_addr and out_value_type.
1691 Pass OUT_VALUE_ADDR.
1692 * compile/compile.c: Include valprint.h.
1693 (compile_print_value, compile_print_command): New functions.
1694 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
1695 (_initialize_compile): Update compile code help text. Install
1696 compile_print_command.
1697 * compile/compile.h (compile_print_value): New prototype.
1698 * defs.h (enum compile_i_scope_types): Add
1699 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
1701 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1703 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
1704 Rely on its parameter count.
1705 (compile_object_load): Replace lookup_minimal_symbol_text by
1706 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
1708 * compile/compile-object-load.h (struct compile_module): Replace
1709 func_addr by func_sym.
1710 * compile/compile-object-run.c: Include block.h.
1711 (compile_object_run): Reset module variable after it is freed. Use
1712 FUNC_SYM instead of FUNC_ADDR. Rely on it.
1714 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1716 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
1717 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
1718 (c_compute_program): Call generate_register_struct after typedefs.
1719 * compile/compile-loc2c.c (push, pushf_register_address)
1720 (pushf_register): Cast to GCC_UINTPTR.
1721 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
1722 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
1723 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
1724 * compile/compile.c (_initialize_compile): Enable warnings for
1727 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1729 * cli/cli-script.c (execute_control_command): Update
1730 eval_compile_command caller.
1731 * compile/compile-object-load.c (compile_object_load): Add parameters
1732 scope and scope_data. Set them.
1733 * compile/compile-object-load.h (struct compile_module): Add fields
1734 scope and scope_data.
1735 (compile_object_load): Add parameters scope and scope_data.
1736 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
1737 scope and scope_data.
1738 (compile_object_run): Propagate the fields scope and scope_data.
1739 * compile/compile.c (compile_file_command, compile_code_command):
1740 Update eval_compile_command callers.
1741 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
1742 * compile/compile.h (eval_compile_command): Add parameter scope_data.
1743 * defs.h (struct command_line): Add field scope_data.
1745 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1747 * printcmd.c (struct format_data): Move it to valprint.h.
1748 (print_command_parse_format, print_value): New functions from ...
1749 (print_command_1): ... here. Call them.
1750 * valprint.h (struct format_data): Move it here from printcmd.c.
1751 (print_command_parse_format, print_value): New declarations.
1753 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1755 * compile/compile-object-load.c (compile_object_load): Add
1756 COMPILE_DEBUG message.
1758 2015-05-15 Jerome Guitton <guitton@adacore.com>
1760 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
1761 index to get element instead of enum value.
1762 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
1763 of index to compute length, but enum values to compute bounds.
1764 (ada_array_length): Use enum position of index instead of enum value.
1765 (pos_atr): Move position computation to...
1766 (ada_evaluate_subexp): Use enum values to compute bounds.
1767 * gdbtypes.c (discrete_position): ...this new function.
1768 * gdbtypes.h (discrete_position): New function declaration.
1769 * valprint.c (val_print_array_elements): Call discrete_position
1770 to handle array indexed by non-contiguous enumeration types.
1772 2015-05-15 Jerome Guitton <guitton@adacore.com>
1774 * ada-lang.c (find_parallel_type_by_descriptive_type):
1775 Go through typedefs during lookup.
1776 (to_fixed_array_type): Add support for non-bit packed arrays
1777 as variable-length fields.
1779 2015-05-15 Pedro Alves <palves@redhat.com>
1780 Simon Marchi <simon.marchi@ericsson.com>
1782 * event-loop.c (gdb_notifier) <next_file_handler,
1783 next_poll_fds_index>: New fields.
1784 (get_next_file_handler_to_handle_and_advance): New function.
1785 (delete_file_handler): If deleting the next file handler to
1786 handle, advance to the next file handler.
1787 (gdb_wait_for_event): Bail early if no event fired. Poll file
1788 handlers in round-robin fashion.
1790 2015-05-15 Pedro Alves <palves@redhat.com>
1792 * linux-tdep.c (linux_find_memory_regions_full): Rename local
1793 'private' to 'priv'.
1795 2015-05-15 Pedro Alves <palves@redhat.com>
1797 * nat/linux-nat.h: Include "target/waitstatus.h".
1799 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
1801 * python/py-unwind.c (struct reg_info): Move out of ...
1802 (struct cached_frame_info): ... this scope.
1803 (pending_frame_object_type, unwind_info_object_type): Make extern.
1805 2015-05-15 Joel Brobecker <brobecker@adacore.com>
1807 * ada-lang.c (ada_value_primitive_packed_val): Make sure
1808 accumSize is never negative.
1810 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
1812 * tui/tui-command.c: Remove include of <ctype.h>.
1813 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
1815 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
1817 * dwarf2read.c (die_needs_namespace): Return 1 for
1818 DW_TAG_inlined_subroutine.
1820 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1822 * regcache.c (regcache_cpy_no_passthrough): New declaration.
1823 (regcache_cpy_no_passthrough): Make it static, add function comment.
1824 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
1825 (regcache_cpy_no_passthrough): Remove declaration.
1827 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1829 * gdbthread.h (struct thread_control_state): Update comment for
1831 * infcall.c (run_inferior_call): Update comment about
1833 * infcmd.c (get_return_value): Update comment about stop_registers.
1834 (finish_forward): Update comment about proceed_to_finish.
1835 * infrun.c (stop_registers): Remove.
1836 (clear_proceed_status, normal_stop): Remove stop_registers handling.
1837 * infrun.h (stop_registers): Remove.
1839 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1841 * infcall.c (struct dummy_frame_context_saver)
1842 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
1843 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1844 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1846 (call_function_by_hand_dummy): Move discard_cleanups of
1847 inf_status_cleanup before dummy_frame_push. Call
1848 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
1849 Use dummy_frame_context_saver_get_regs instead of stop_registers.
1850 * infcall.h (struct dummy_frame_context_saver)
1851 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1852 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1854 * infcmd.c: Include infcall.h.
1855 (get_return_value): Add parameter ctx_saver, use it instead of
1857 (print_return_value): Add parameter ctx_saver, pass it.
1858 (struct finish_command_continuation_args): Add field ctx_saver.
1859 (finish_command_continuation): Update print_return_value caller.
1860 (finish_command_continuation_free_arg): Free also ctx_saver.
1861 (finish_forward): Call dummy_frame_context_saver_setup.
1862 * inferior.h (struct dummy_frame_context_saver): New declaration.
1863 (get_return_value): Add parameter ctx_saver.
1864 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
1865 get_return_value caller.
1867 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1869 * dummy-frame.c (struct dummy_frame_dtor_list): New.
1870 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
1871 (remove_dummy_frame): Process dtor_list.
1872 (pop_dummy_frame): Process dtor_list.
1873 (register_dummy_frame_dtor): Maintain dtor_list.
1874 (find_dummy_frame_dtor): Handle dtor_list.
1875 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
1878 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1880 * compile/compile-object-run.c (do_module_cleanup): Add parameter
1882 (compile_object_run): Update do_module_cleanup caller.
1883 * dummy-frame.c: Include infcall.h.
1884 (struct dummy_frame): Update dtor comment.
1885 (remove_dummy_frame): Call dtor.
1886 (pop_dummy_frame): Update dtor caller.
1887 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
1890 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1894 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1896 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
1897 Xmethods now being able to specify a result type to that new
1900 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1902 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
1903 first before resizing the window.
1904 * tui/tui.c (tui_enable): Likewise.
1906 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1908 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
1909 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
1910 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
1911 dummy_dtor parameter.
1912 * infcall.h: Include dummy-frame.h.
1913 (call_function_by_hand_dummy_dtor_ftype): Remove.
1914 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
1917 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1920 * top.c (history_size_setshow_var): Change type to signed.
1921 Initialize to -2. Update documentation.
1922 (set_readline_history_size): Define.
1923 (set_history_size_command): Use it. Remove logic for handling
1925 (init_history): Use set_readline_history_size(). Test for a
1926 value of -2 instead of 0 when determining whether to set a
1927 default history size.
1928 (init_main): Decode the argument of the "size" command as a
1929 zuinteger_unlimited.
1931 2015-05-12 Doug Evans <dje@google.com>
1933 * dwarf2read.c (struct file_entry): Tweak comments.
1934 (get_debug_line_section): Tweak comments.
1936 2015-05-12 Don Breazeal <donb@codesourcery.com>
1938 * NEWS: Announce fork support in the RSP and support
1939 for fork debugging in extended mode.
1941 2015-05-12 Don Breazeal <donb@codesourcery.com>
1943 * remote.c (remote_insert_fork_catchpoint): New function.
1944 (remote_remove_fork_catchpoint): New function.
1945 (remote_insert_vfork_catchpoint): New function.
1946 (remote_remove_vfork_catchpoint): New function.
1947 (pending_fork_parent_callback): New function.
1948 (remove_new_fork_child): New function.
1949 (remote_update_thread_list): Call remote_notif_get_pending_events
1950 and remove_new_fork_child.
1951 (extended_remote_kill): Kill fork child when killing the
1952 parent before follow_fork completes.
1953 (init_extended_remote_ops): Initialize target vector with
1954 new fork catchpoint functions.
1956 2015-05-12 Don Breazeal <donb@codesourcery.com>
1958 * remote.c (remove_vfork_event_p): New function.
1959 (remote_follow_fork): Add vfork event type to event checking.
1960 (remote_parse_stop_reply): New stop reasons "vfork" and
1961 "vforkdone" for RSP 'T' Stop Reply Packet.
1963 2015-05-12 Don Breazeal <donb@codesourcery.com>
1965 * linux-nat.c (linux_nat_ptrace_options): New function.
1966 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
1967 Call linux_nat_ptrace_options and use different argument to
1968 linux_enable_event_reporting.
1969 (_initialize_linux_nat): Delete call to
1970 linux_ptrace_set_additional_flags.
1971 * nat/linux-ptrace.c (current_ptrace_options): Rename to
1972 supported_ptrace_options.
1973 (additional_flags): Delete variable.
1974 (linux_check_ptrace_features): Use supported_ptrace_options.
1975 (linux_test_for_tracesysgood, linux_test_for_tracefork):
1976 Likewise, and remove additional_flags check.
1977 (linux_enable_event_reporting): Change 'attached' argument to
1978 'options'. Use supported_ptrace_options.
1979 (ptrace_supports_feature): Change comment. Use
1980 supported_ptrace_options.
1981 (linux_ptrace_set_additional_flags): Delete function.
1982 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
1983 Delete function prototype.
1984 * remote.c (remote_fork_event_p): New function.
1985 (remote_detach_pid): New function.
1986 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
1987 if doing detach-on-fork.
1988 (remote_follow_fork): New function.
1989 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
1990 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
1991 (init_extended_remote_ops): Initialize to_follow_fork.
1993 2015-05-12 Don Breazeal <donb@codesourcery.com>
1995 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
1996 from static to extern.
1997 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
1998 * remote.c (anonymous enum): <PACKET_fork_event_feature,
1999 * PACKET_vfork_event_feature>: New enumeration constants.
2000 (remote_protocol_features): Add table entries for new packets.
2001 (remote_query_supported): Add new feature queries to qSupported
2004 2015-05-12 Gary Benson <gbenson@redhat.com>
2006 * remote.c (remote_add_inferior): Call exec_file_locate_attach
2007 for fake PIDs as well as real ones.
2008 (remote_pid_to_exec_file): Send empty annex if PID is fake.
2010 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
2012 * NEWS (Python Scripting): Mention the new gdb.Value methods.
2013 * python/py-value.c (valpy_reference_value): New function.
2014 (valpy_const_value): Likewise.
2015 (value_object_methods): Add new methods.
2016 * value.c (make_cv_value): New function.
2017 * value.h (make_cv_value): Declare.
2019 2015-05-08 Yao Qi <yao@codesourcery.com>
2020 Sandra Loosemore <sandra@codesourcery.com>
2022 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
2023 to 'lh->include_dirs' before accessing to it.
2024 (psymtab_include_file_name): Likewise.
2025 (dwarf_decode_lines_1): Likewise.
2026 (dwarf_decode_lines): Likewise.
2027 (file_file_name): Likewise.
2029 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
2031 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
2032 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
2033 (nios2_linux_rt_sigreturn_init): Adjust base address of
2036 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
2038 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
2039 "trap 31" as the breakpoint instruction on all targets.
2041 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2043 * infcmd.c (print_return_value): Remove unused declaration.
2045 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2047 * dwarf2read.c (attr_to_dynamic_prop)
2048 <DW_AT_data_member_location>: Use read_type_die isntead of
2051 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2053 * ada-lang.c (ada_convert_actual): Add handling of formals
2054 passed inside an aligner type.
2056 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2058 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
2060 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
2063 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
2064 Print xmethod matcher status.
2066 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
2068 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
2069 register in the regcache when treating the PSWM register, and vice
2072 2015-05-07 Gary Benson <gbenson@redhat.com>
2074 * linux-thread-db.c (struct thread_db_info)
2075 <td_ta_map_id2thr_p>: Remove field.
2076 (try_thread_db_load_1): Remove initialization for the above.
2078 2015-05-07 Gary Benson <gbenson@redhat.com>
2080 * linux-thread-db.c (struct thread_db_info)
2081 <td_thr_validate_p>: Remove field.
2082 (try_thread_db_load_1): Remove initialization for the above.
2084 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2086 * compile/compile-object-load.c (compile_object_load): Support
2089 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2091 * compile/compile.c (compile_to_object): Make the cmd_string parameter
2092 const. Use new variables for the const compatibility.
2093 (eval_compile_command): Make the cmd_string parameter const.
2094 * compile/compile.h (eval_compile_command): Make the cmd_string
2097 2015-05-06 Joel Brobecker <brobecker@adacore.com>
2099 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
2101 * top.c (deprecated_init_ui_hook): Delete.
2102 (gdb_init): Remove handling of deprecated_init_ui_hook.
2103 * interps.c (clear_interpreter_hooks): Remove handling of
2104 deprecated_init_ui_hook.
2105 * main.c (captured_main): Update comment.
2107 2015-05-06 Joel Brobecker <brobecker@adacore.com>
2109 * solib.c (_initialize_solib): Add "info dll" alias creation.
2110 * windows-nat.c (set_windows_aliases): Delete.
2111 (_initialize_windows_nat): Remove deprecated_init_ui_hook
2113 * NEWS: Add news entry about "info dll" now being available
2116 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2118 * ada-lang.c (value_assign_to_component): Reformat and improve
2119 documentation. Remove all trailing spaces.
2121 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2123 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
2124 Stop counting inlined frames as soon as an out-of-line function
2127 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
2129 * dwarf2read.c (inherit_abstract_dies): Skip
2130 DW_TAG_GNU_call_site dies while inheriting children of an
2131 abstract DIE into a scope.
2132 (read_lexical_block_scope): Inherit abstract DIE's for
2135 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2137 * ada-valprint.c (val_print_packed_array_elements): Delete
2138 variable "len". Add a type-length check when comparing two
2139 consecutive elements of the array. Use the element's actual
2140 length in call to value_contents_eq.
2141 * ada-lang.c (ada_value_primitive_packed_val): Always return
2142 a value whose type has been resolved.
2144 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2146 * ada-lang.c (ada_value_primitive_packed_val): Recompute
2147 BIT_SIZE and LEN if the size of the resolved type is smaller
2148 than BIT_SIZE * HOST_CHAR_BIT.
2150 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2152 * ada-lang.c (ada_value_primitive_packed_val): Use a more
2153 correct address in call to value_at. Adjust call to
2154 value_address accordingly.
2156 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2158 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
2161 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2163 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
2164 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
2166 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
2167 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
2168 (resolve_dynamic_type_internal): Set pinfo.valaddr.
2169 Add handling of addr_stack->valaddr.
2170 (resolve_dynamic_type): Add "valaddr" parameter.
2171 Set pinfo.valaddr field.
2172 * ada-lang.c (ada_discrete_type_high_bound): Update call to
2173 resolve_dynamic_type.
2174 (ada_discrete_type_low_bound): Likewise.
2175 * findvar.c (default_read_var_value): Likewise.
2176 * value.c (value_from_contents_and_address): Likewise.
2178 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2180 * gdbtypes.c (resolve_dynamic_array): Use
2181 create_array_type_with_stride instead of create_array_type.
2183 2015-04-30 DJ Delorie <dj@redhat.com>
2185 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
2188 2015-04-29 Doug Evans <dje@google.com>
2191 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
2192 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
2193 EVAL_AVOID_SIDE_EFFECTS for xmethods.
2194 * extension-priv.h (struct extension_language_ops)
2195 <get_xmethod_result_type>: New member.
2196 * extension.c (get_xmethod_result_type): New function.
2197 * extension.h (get_xmethod_result_type): Declare.
2198 * python/py-xmethods.c (get_result_type_method_name): New static
2200 (py_get_result_type_method_name): Ditto.
2201 (gdbpy_get_xmethod_result_type): New function.
2202 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
2203 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
2204 * python/python.c (python_extension_ops): Add
2205 gdbpy_get_xmethod_result_type.
2206 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
2207 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
2209 (value_x_unop): Ditto.
2210 * value.c (result_type_of_xmethod): New function.
2211 * value.h (result_type_of_xmethod): Declare.
2213 2015-04-29 Gary Benson <gbenson@redhat.com>
2215 * solib.c (solib_find_1): Allow fd argument to be NULL.
2216 (exec_file_find): Update comment.
2217 (solib_find): Likewise.
2218 * exec.c (exec_file_locate_attach): Use NULL as fd
2219 argument to exec_file_find to avoid having to close
2221 * infrun.c (follow_exec): Likewise.
2223 2015-04-28 Doug Evans <dje@google.com>
2226 * python/lib/gdb/printing.py (register_pretty_printer): Handle
2227 name or __name__ attributes. Handle gdb module as first argument.
2229 2015-04-28 Doug Evans <dje@google.com>
2232 * python/py-prettyprint.c (print_children): Verify result of children
2233 iterator. Provide better error message.
2234 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
2235 * python/python.c (gdbpy_print_python_errors_p): New function.
2237 2015-04-28 Doug Evans <dje@google.com>
2239 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
2241 2015-04-28 Sasha Smundak <asmundak@google.com>
2243 * NEWS: Mention gdb.Type.optimized_out method.
2244 * python/py-type.c (typy_optimized_out): New function.
2246 2015-04-28 John Baldwin <jhb@FreeBSD.org>
2248 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
2250 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2252 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
2253 (initialize_utils): Move call of init_page_info() to ...
2254 * top.c (gdb_init): ... here.
2256 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2258 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
2259 (tui_sigwinch_handler): Still update our idea of
2260 the terminal's width and height even when TUI is not active.
2262 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2264 * utils.h (set_screen_width_and_height): Declare.
2265 * utils.c (set_screen_width_and_height): Define.
2266 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
2268 2015-04-28 Gary Benson <gbenson@redhat.com>
2270 * infrun.c (solist.h): New include.
2271 (follow_exec): Use exec_file_find to prefix execd_pathname
2274 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2276 * tui/tui-source.c (tui_set_source_content): Avoid calling
2277 strcpy() when offset is 0.
2279 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2282 * tui/tui-data.c (tui_free_window): Don't free the locator
2283 window when passed an SRC_WIN or a DISASSEM_WIN.
2285 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2287 * tui/tui-data.h (struct tui_win_element): Forward-declare.
2288 (tui_win_content): Move declaration.
2289 (struct tui_gen_win_info): Give 'content' field the
2290 type tui_win_content.
2291 * tui/tui-data.c (init_content_element): Remove redundant and
2293 (tui_add_content_elements): Remove erroneous cast.
2294 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
2296 (tui_get_begin_asm_address): Likewise.
2297 * tui/tui-regs.c (tui_show_registers): Likewise.
2298 (tui_show_register_group): Likewise.
2299 (tui_display_registers_from): Likewise.
2300 (tui_check_register_values): Likewise.
2301 * tui/tui-source.c (tui_set_source_content): Likewise.
2302 (tui_set_source_content_nil): Likewise.
2303 (tui_source_is_displayed): Likewise.
2304 * tui/tui-stack.c (tui_show_locator_content): Likewise.
2305 (tui_set_locator_fullname): Likewise.
2306 (tui_set_locator_info): Likewise.
2307 (tui_show_frame_info): Likewise.
2308 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
2309 (tui_show_source_line): Likewise.
2310 (tui_horizontal_source_scroll): Likewise.
2311 (tui_update_breakpoint_info): Likewise.
2312 (tui_set_exec_info_content): Likewise.
2313 (tui_show_exec_info_content): Likewise.
2314 (tui_alloc_source_buffer): Likewise.
2315 (tui_line_is_displayed): Likewise.
2316 (tui_addr_is_displayed): Likewise.
2318 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2320 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
2321 event if PL_FLAG_EXEC is set.
2322 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
2323 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
2324 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
2325 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
2326 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
2328 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2330 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
2331 [TDP_RFPPWAIT] New variable fbsd_pending_children.
2332 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
2333 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
2334 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
2335 [PT_LWPINFO] (fbsd_wait): New function.
2336 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
2337 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
2338 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
2339 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
2340 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
2341 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
2342 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
2343 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
2344 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
2346 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
2347 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
2348 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
2349 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
2350 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
2351 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
2352 Set "to_post_attach" to "fbsd_post_attach".
2354 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2356 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
2357 (fbsd_find_memory_regions): Mark static.
2358 (fbsd_nat_add_target): New function.
2359 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
2360 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
2361 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
2362 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
2363 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
2364 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
2366 2015-04-27 Gary Benson <gbenson@redhat.com>
2368 * objfiles.c (allocate_objfile): Do not attempt to expand name
2369 if name is a "target:" filename.
2370 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
2371 to load auto-load scripts for objfiles with "target:" filenames.
2373 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2375 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
2376 (enum s390_vector_abi_kind): New enum.
2377 (struct gdbarch_tdep)<vector_abi>: New field.
2378 (s390_effective_inner_type): Add parameter min_size. Stop
2379 unwrapping if the inner type is smaller than min_size.
2380 (s390_function_arg_float): Adjust call to
2381 s390_effective_inner_type.
2382 (s390_function_arg_vector): New function.
2383 (s390_function_arg_integer): Adjust comment.
2384 (struct s390_arg_state)<vr>: New field.
2385 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
2386 arguments according to vector ABI when appropriate.
2387 (s390_push_dummy_call): Initialize the argument state's field
2388 'vr'. Adjust calls to s390_handle_arg.
2389 (s390_register_return_value): Handle vector return values.
2390 (s390_return_value): Apply the "register" return value convention
2391 to a vector when appropriate.
2392 (s390_gdbarch_init): Initialize tdep->vector_abi.
2393 * NEWS: Announce S390 vector ABI support.
2395 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2397 * s390-linux-tdep.c (s390_return_value_convention): Remove
2398 function. Inline its logic...
2399 (s390_return_value): ...here. Instead, move the handling of the
2400 "register" return value convention...
2401 (s390_register_return_value): ...here. New function.
2403 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2406 (is_float_singleton): Remove function. Move the "singleton" part
2408 (s390_effective_inner_type): ...here. New function.
2409 (is_float_like): Remove function. Inline its logic...
2410 (s390_function_arg_float): ...here.
2411 (is_pointer_like, is_integer_like, is_struct_like): Remove
2412 functions. Inline their logic...
2413 (s390_function_arg_integer): ...here.
2414 (s390_function_arg_pass_by_reference): Remove function.
2415 (extend_simple_arg): Remove function.
2416 (alignment_of): Remove function.
2417 (struct s390_arg_state): New structure.
2418 (s390_handle_arg): New function.
2419 (s390_push_dummy_call): Move parameter placement logic to the new
2420 function s390_handle_arg. Call it for calculating the stack area
2421 sizes first, and again for actually writing the parameters.
2423 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2425 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
2426 false if the argument is zero.
2428 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
2430 * ada-lang.c (template_to_static_fixed_type): Return input type
2431 when it is already fixed. Cache the input type itself when not
2432 creating a static fixed copy. Make it explicit that we never
2433 molestate the input type.
2434 * gdbtypes.c (resolve_dynamic_struct): Reset the
2435 TYPE_TARGET_TYPE field for resolved copies.
2437 2015-04-27 Joel Brobecker <brobecker@adacore.com>
2439 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
2440 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
2441 (template_to_static_fixed_type): Call ada_check_typedef only
2444 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
2446 * cli/cli-dump.c (srec_dump_command): Add internationalization
2448 (ihex_dump_command): Likewise.
2449 (tekhex_dump_command): Likewise.
2450 (binary_dump_command): Likewise.
2451 (binary_append_command): Likewise.
2453 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
2455 * cli/cli-dump.c (verilog_cmdlist): New variable.
2456 (dump_verilog_memory): New function.
2457 (dump_verilog_value): New function.
2458 (verilog_dump_command): New function.
2459 (_initialize_cli_dump): Add new commands to support verilog dump
2461 * NEWS: Add entry for "dump verilog".
2463 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
2465 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
2466 descriptive type when there is none.
2468 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
2470 * tui/tui-win.c (tui_async_resize_screen): Call
2471 rl_resize_terminal().
2473 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
2475 * windows-nat.c (handle_output_debug_string): Don't change
2476 current_event.dwThreadId.
2477 (get_windows_debug_event): Use thread_id, rather than relying on
2478 current_event.dwThreadId being changed.
2480 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
2482 * windows-nat.c (windows_continue): Report an error if
2483 ContinueDebugEvent() fails.
2485 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
2487 * windows-nat.c (windows_resume): Fix misspelling in debug output.
2489 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
2491 * windows-nat.c (get_windows_debug_event): Replace retval with
2492 thread_id throughout. Update stale comment.
2494 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
2496 * windows-nat.c (get_windows_debug_event): Don't use ternary
2497 conditional operator.
2499 2015-04-21 Pierre Muller <muller@sourceware.org>
2502 p-exp.y (yylex): Reorganize code to return the matched pattern
2503 for a field of this.
2505 2015-04-21 Gary Benson <gbenson@redhat.com>
2507 * common/fileio.h (fileio_to_host_openflags): New declaration.
2508 * common/fileio.c (fcntl.h): New include.
2509 (fileio_to_host_openflags): New function, factored out from...
2510 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
2513 2015-04-21 Kevin Buettner <kevinb@redhat.com>
2515 * rl78-tdep.c (RL78_SP_ADDR): Define.
2516 (opc_reg_to_gdb_regnum): New static function.
2517 (rl78_analyze_prologue): Recognize instructions forming slightly
2518 more interesting prologues.
2520 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
2523 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2524 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
2525 TYPE_CODE_REF types so that they are not considered as dynamic
2526 depending on the referenced type.
2527 (resolve_dynamic_type_internal): Likewise.
2529 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
2532 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2533 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
2534 "top_level" parameter.
2535 (resolve_dynamic_type_internal): Remove the unused "top_level"
2536 parameter. Update call to is_dynamic_type_internal.
2537 (is_dynamic_type): Update call to is_dynamic_type_internal.
2538 (resolve_dynamic_range): Update call to
2539 resolve_dynamic_type_internal.
2540 (resolve_dynamic_union): Likewise.
2541 (resolve_dynamic_struct): Likewise.
2542 (resolve_dynamic_type): Likewise.
2544 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
2546 * breakpoint.c (update_dprintf_command_list): Remove duplicated
2549 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
2551 * reply_mig_hack.awk: Robustify parsing.
2553 * reply_mig_hack.awk: Don't bother to declare an intermediate
2554 function pointer variable.
2556 2015-04-17 Doug Evans <dje@google.com>
2558 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
2559 to "exec_displacement" to avoid confusion with inner use of the name.
2561 2015-04-17 Pedro Alves <palves@redhat.com>
2563 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
2564 if HW point of TYPE isn't supported.
2566 2015-04-17 Yao Qi <yao.qi@linaro.org>
2567 Pedro Alves <palves@redhat.com>
2569 * target.h (target_can_use_hardware_watchpoint): Update comments.
2570 Remove trailing ";".
2572 2015-04-17 Gary Benson <gbenson@redhat.com>
2574 * remote.c (remote_add_inferior): New argument try_open_exec.
2575 If nonzero, attempt to open the inferior's executable file as
2576 the main executable if no main executable is open already.
2577 All callers updated.
2578 * NEWS: Mention that GDB now supports automatic location and
2579 retrieval of executable + files from remote targets.
2581 2015-04-17 Gary Benson <gbenson@redhat.com>
2583 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
2584 * remote.c (PACKET_qXfer_exec_file): Likewise.
2585 (remote_protocol_features): Register the
2586 "qXfer:exec-file:read" feature.
2587 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
2588 (remote_pid_to_exec_file): New function.
2589 (init_remote_ops): Initialize to_pid_to_exec_file.
2590 (_initialize_remote): Register new "set/show remote
2591 pid-to-exec-file-packet" command.
2592 * NEWS: Announce new qXfer:exec-file:read packet.
2594 2015-04-17 Gary Benson <gbenson@redhat.com>
2596 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
2598 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
2599 New function, factored out from...
2600 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
2602 2015-04-17 Gary Benson <gbenson@redhat.com>
2604 * exec.c (solist.h): New include.
2605 (exec_file_locate_attach): Prefix absolute executable
2606 paths with gdb_sysroot if set.
2607 * NEWS: Mention that executable paths may be prepended
2610 2015-04-17 Gary Benson <gbenson@redhat.com>
2612 * solist.h (exec_file_find): New declaration.
2613 * solib.c (solib_find_1): New function, factored out from...
2614 (solib_find): ...here.
2615 (exec_file_find): New function.
2617 2015-04-17 Gary Benson <gbenson@redhat.com>
2619 * gdbcore.h (exec_file_locate_attach): New declaration.
2620 * exec.c (exec_file_locate_attach): New function, factored
2622 * infcmd.c (attach_command_post_wait): ...here.
2624 2015-04-17 Mike Frysinger <vapier@gentoo.org>
2626 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
2628 2015-04-16 Yao Qi <yao.qi@linaro.org>
2630 * infrun.c (maybe_software_singlestep): Declare.
2631 (displaced_step_fixup): Call maybe_software_singlestep.
2633 2015-04-15 Doug Evans <dje@google.com>
2635 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
2637 2015-04-15 Doug Evans <dje@google.com>
2639 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
2641 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
2643 * python/lib/gdb/command/unwinders.py: Add parentheses.
2645 2015-04-15 Yao Qi <yao.qi@linaro.org>
2647 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
2649 2015-04-15 Yao Qi <yao.qi@linaro.org>
2651 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
2653 2015-04-15 Yao Qi <yao.qi@linaro.org>
2655 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
2656 dsc->insn_size instead of 4.
2658 2015-04-14 Gary Benson <gbenson@redhat.com>
2660 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
2661 * minidebug.c (lzma_stat): Likewise.
2662 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
2663 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
2665 2015-04-13 Stan Shebs <stanshebs@google.com>
2667 * MAINTAINERS: Update my email address.
2669 2015-04-13 John Baldwin <jhb@FreeBSD.org>
2671 * amd64-tdep.c (amd64_target_description): New function.
2672 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
2673 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
2674 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
2675 x86 extended save area.
2676 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
2677 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
2678 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
2679 (_initialize_amd64fbsd_nat): Set "to_read_description" to
2680 "amd64fbsd_read_description".
2681 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
2682 (amd64fbsd_supply_xstateregset): New function.
2683 (amd64fbsd_collect_xstateregset): New function.
2684 Add "amd64fbsd_xstateregset".
2685 (amd64fbsd_iterate_over_regset_sections): New function.
2686 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
2687 "I386_FBSD_XSAVE_XCR0_OFFSET".
2688 Add "iterate_over_regset_sections" gdbarch method.
2689 Add "core_read_description" gdbarch method.
2690 * i386-tdep.c (i386_target_description): New function.
2691 * i386-tdep.h: Export i386_target_description and tdesc_i386.
2692 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
2693 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
2694 x86 extended save area.
2695 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
2696 * i386bsd-nat.h: Export i386bsd_xsave_len.
2697 * i386fbsd-nat.c (i386fbsd_read_description): New function.
2698 (_initialize_i386fbsd_nat): Set "to_read_description" to
2699 "i386fbsd_read_description".
2700 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
2701 (i386fbsd_core_read_description): New function.
2702 (i386fbsd_supply_xstateregset): New function.
2703 (i386fbsd_collect_xstateregset): New function.
2704 Add "i386fbsd_xstateregset".
2705 (i386fbsd_iterate_over_regset_sections): New function.
2706 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
2707 "I386_FBSD_XSAVE_XCR0_OFFSET".
2708 Add "iterate_over_regset_sections" gdbarch method.
2709 Add "core_read_description" gdbarch method.
2710 * i386fbsd-tdep.h: New file.
2712 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2714 * NEWS (Changes since GDB 7.9): Add removed -xdb.
2715 * breakpoint.c (command_line_is_silent): Remove xdb_commands
2717 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
2719 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
2721 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
2723 * defs.h (xdb_commands): Remove declaration.
2724 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
2725 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
2726 * infcmd.c (run_no_args_command, go_command): Remove.
2727 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
2728 * infrun.c (xdb_handle_command): Remove.
2729 (_initialize_infrun): Remove xdb_commands for lz and z.
2730 * main.c (xdb_commands): Remove variable.
2731 (captured_main): Remove "xdb" from long_options.
2732 (print_gdb_help): Remove --xdb from help.
2733 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
2734 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
2735 * stack.c (backtrace_full_command, args_plus_locals_info)
2736 (current_frame_command): Remove.
2737 (_initialize_stack): Remove xdb_commands for t, T and l.
2738 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
2739 * thread.c (_initialize_thread): Remove xdb_commands condition.
2740 * tui/tui-layout.c (tui_toggle_layout_command)
2741 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
2742 (_initialize_tui_layout): Remove xdb_commands for td and ts.
2743 * tui/tui-regs.c (tui_scroll_regs_forward_command)
2744 (tui_scroll_regs_backward_command): Remove.
2745 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
2746 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
2747 (_initialize_tui_win): Remove xdb_commands for U and w.
2748 * utils.c (pagination_on_command, pagination_off_command): Remove.
2749 (initialize_utils): Remove xdb_commands for am and sm.
2751 2015-04-10 Pedro Alves <palves@redhat.com>
2753 * infrun.c (displaced_step_fixup): Switch to the event ptid
2754 earlier. If the thread stopped for a watchpoint and the
2755 target/arch has non-continuable watchpoints, cancel the displaced
2757 (resume): Don't start a displaced step if in-line step-over info
2760 2015-04-10 Pedro Alves <palves@redhat.com>
2762 * infrun.c (displaced_step_in_progress): New function.
2763 (do_target_resume): Advise target to report all signals if
2766 2015-04-10 Pedro Alves <palves@redhat.com>
2769 * infrun.c (process_event_stop_test): Don't assume a step-resume
2770 is set if tp->stepped_breakpoint is true.
2772 2015-04-10 Yao Qi <yao.qi@linaro.org>
2774 * arm-tdep.c (install_alu_reg): Update comment.
2775 (thumb_copy_alu_reg): Remove local variable rn. Update
2776 debugging message. Use r2 instead of r1 in the modified
2779 2015-04-10 Pedro Alves <palves@redhat.com>
2782 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
2783 linux_displaced_step_location as gdbarch_displaced_step_location
2785 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
2786 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
2787 * linux-tdep.c (linux_displaced_step_location): New function,
2788 based on ppc_linux_displaced_step_location.
2789 * linux-tdep.h (linux_displaced_step_location): New declaration.
2790 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
2791 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
2793 (ppc_linux_init_abi): Install linux_displaced_step_location as
2794 gdbarch_displaced_step_location hook, even without Cell/B.E..
2795 (_initialize_ppc_linux_tdep): Don't install
2796 ppc_linux_inferior_created as inferior_created observer.
2797 * s390-linux-tdep.c (s390_gdbarch_init): Install
2798 linux_displaced_step_location as gdbarch_displaced_step_location
2801 2015-04-09 Gary Benson <gbenson@redhat.com>
2803 * common/common-remote-fileio.h: Rename to...
2804 * common/fileio.h: ...this. Update all references.
2805 (remote_fileio_to_fio_error): Rename to...
2806 (host_to_fileio_error): ...this.
2807 (remote_fileio_to_be): Rename to...
2808 (host_to_bigendian): ...this. Update all callers.
2809 (remote_fileio_to_fio_uint): Rename to...
2810 (host_to_fileio_uint): ...this. Update all callers.
2811 (remote_fileio_to_fio_time): Rename to...
2812 (host_to_fileio_time): ...this. Update all callers.
2813 (remote_fileio_to_fio_stat): Rename to...
2814 (host_to_fileio_stat): ...this.
2815 Update all references.
2816 * common/common-remote-fileio.c: Rename to...
2817 * common/fileio.c: ...this. Update all references.
2818 (remote_fileio_to_fio_error): Rename to...
2819 (host_to_fileio_error): ...this. Update all callers.
2820 (remote_fileio_mode_to_target): Rename to...
2821 (fileio_mode_pack): ...this. Update all callers.
2822 (remote_fileio_to_fio_mode): Rename to...
2823 (host_to_fileio_mode): ...this. Update all callers.
2824 (remote_fileio_to_fio_ulong): Rename to...
2825 (host_to_fileio_ulong): ...this. Update all callers.
2826 (remote_fileio_to_fio_stat): Rename to...
2827 (host_to_fileio_stat): ...this. Update all callers.
2829 2015-04-09 Andy Wingo <wingo@igalia.com>
2831 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
2832 (frame_functions): Bind gdbscm_frame_read_register to
2833 frame-read-register.
2834 * guile/lib/gdb.scm (frame-read-register): Export.
2836 2015-04-09 Gary Benson <gbenson@redhat.com>
2838 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
2840 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
2841 New function, factored out the named functions below.
2842 * inf-child.c (gdb/fileio.h): Remove include.
2843 (common-remote-fileio.h): New include.
2844 (inf_child_errno_to_fileio_error): Remove function. Update
2845 all callers to use remote_fileio_to_fio_error.
2846 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
2848 2015-04-09 Andy Wingo <wingo@igalia.com>
2850 * MAINTAINERS (Write After Approval): Add Andy Wingo.
2852 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
2854 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
2855 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
2856 * configure: Regenerated.
2858 2015-04-09 Pedro Alves <palves@redhat.com>
2860 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
2861 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
2862 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
2863 * gnulib/import/Makefile.am: Update.
2864 * gnulib/import/Makefile.in: Update.
2865 * gnulib/import/m4/gnulib-cache.m4: Update.
2866 * gnulib/import/m4/gnulib-comp.m4: Update.
2867 * gnulib/import/m4/strtok_r.m4: New file.
2868 * gnulib/import/strtok_r.c: New file.
2870 2015-04-09 Pedro Alves <palves@redhat.com>
2872 * gnulib/update-gnulib.sh (aclocal version check): Filter out
2873 "called too early to check prototype".
2875 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
2878 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
2879 use a caching mechanism. Adjust comments and code to reflect
2880 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
2881 (cmdpy_completer_handle_brkchars): Adjust call to
2882 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
2883 (cmdpy_completer): Likewise.
2885 2015-04-08 Yao Qi <yao.qi@linaro.org>
2887 * spu-tdep.c (spu_gdbarch_init): Don't call
2888 set_gdbarch_cannot_step_breakpoint.
2890 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
2892 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
2894 2015-04-07 Pedro Alves <palves@redhat.com>
2896 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
2897 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
2898 (delete_exited_threads): New declaration.
2899 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
2900 * linux-nat.c (linux_nat_update_thread_list): New function.
2901 (linux_nat_add_target): Install it.
2902 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
2903 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
2904 (delete_exited_threads): New function.
2906 2015-04-07 Pedro Alves <pedro@codesourcery.com>
2908 * infrun.c (resume) <displaced stepping debug output>: Get the
2909 leader thread's regcache, not resume_ptid's.
2911 2015-04-06 Doug Evans <xdje42@gmail.com>
2913 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
2915 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
2916 Include symbol domain in debugging output.
2918 2015-04-06 Pedro Alves <palves@redhat.com>
2919 Bernd Edlinger <bernd.edlinger@hotmail.de>
2921 * configure.ac: Remove the mingw32-specific stub-termcap.o
2922 fallback, and instead fallback to the stub termcap on all hosts.
2923 * configure: Regenerate.
2924 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
2927 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2929 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
2930 "top_level" parameter.
2931 (resolve_dynamic_type_internal): Remove the unused "top_level"
2932 parameter. Update call to is_dynamic_type_internal.
2933 (is_dynamic_type): Update call to is_dynamic_type_internal.
2934 (resolve_dynamic_range): Update call to
2935 resolve_dynamic_type_internal.
2936 (resolve_dynamic_union): Likewise.
2937 (resolve_dynamic_struct): Likewise.
2938 (resolve_dynamic_type): Likewise.
2940 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2942 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
2943 TYPE_CODE_REF types so that they are not considered as dynamic
2944 depending on the referenced type.
2945 (resolve_dynamic_type_internal): Likewise.
2947 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
2949 * Makefile.in (top_srcdir): New.
2950 * configure: Regenerated.
2952 2015-04-02 Gary Benson <gbenson@redhat.com>
2954 * NEWS: Announce the new default sysroot of "target:".
2956 2015-04-02 Gary Benson <gbenson@redhat.com>
2958 * main.c (captured_main): Set gdb_sysroot to "target:"
2959 if not otherwise set.
2961 2015-04-02 Gary Benson <gbenson@redhat.com>
2963 * exec.c (exec_file_attach): Support "target:" filenames.
2965 2015-04-02 Gary Benson <gbenson@redhat.com>
2967 * solib.c (solib_find): Strip "target:" prefix from sysroot
2968 if accessing local files.
2970 2015-04-02 Gary Benson <gbenson@redhat.com>
2972 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
2973 checks and error messages.
2975 2015-04-02 Gary Benson <gbenson@redhat.com>
2977 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
2978 (remote_filename_p): Remove declaration.
2979 (remote_bfd_open): Likewise.
2980 * remote.c (remote_bfd_iovec_open): Remove function.
2981 (remote_bfd_iovec_close): Likewise.
2982 (remote_bfd_iovec_pread): Likewise.
2983 (remote_bfd_iovec_stat): Likewise.
2984 (remote_filename_p): Likewise.
2985 (remote_bfd_open): Likewise.
2986 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
2987 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
2988 (gdb_bfd_open_maybe_remote): Remove function.
2989 (symfile_bfd_open): Replace remote filename check with
2990 target filename check.
2991 (reread_symbols): Use gdb_bfd_open.
2992 * build-id.c (gdbcore.h): New include.
2993 (build_id_to_debug_bfd): Use gdb_bfd_open.
2994 * infcmd.c (attach_command_post_wait): Remove remote filename
2996 * solib.c (solib_find): Replace remote-specific handling with
2997 target-specific handling. Update comments where necessary.
2998 (solib_bfd_open): Replace remote-specific handling with
2999 target-specific handling.
3000 (gdb_sysroot_changed): New function.
3001 (_initialize_solib): Call the above when gdb_sysroot changes.
3002 * windows-tdep.c (gdbcore.h): New include.
3003 (windows_xfer_shared_library): Use gdb_bfd_open.
3005 2015-04-02 Gary Benson <gbenson@redhat.com>
3007 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
3008 (is_target_filename): New declaration.
3009 (gdb_bfd_has_target_filename): Likewise.
3010 (gdb_bfd_open): Update documentation comment.
3011 * gdb_bfd.c (target.h): New include.
3012 (gdb/fileio.h): Likewise.
3013 (is_target_filename): New function.
3014 (gdb_bfd_has_target_filename): Likewise.
3015 (fileio_errno_to_host): Likewise.
3016 (gdb_bfd_iovec_fileio_open): Likewise.
3017 (gdb_bfd_iovec_fileio_pread): Likewise.
3018 (gdb_bfd_iovec_fileio_close): Likewise.
3019 (gdb_bfd_iovec_fileio_fstat): Likewise.
3020 (gdb_bfd_open): Use target fileio to access paths prefixed
3021 with "target:" where necessary.
3023 2015-04-02 Gary Benson <gbenson@redhat.com>
3025 * target.h (struct target_ops) <to_filesystem_is_local>:
3027 (target_filesystem_is_local): New macro.
3028 * target-delegates.c: Regenerate.
3029 * remote.c (remote_filesystem_is_local): New function.
3030 (init_remote_ops): Initialize to_filesystem_is_local.
3032 2015-04-02 Gary Benson <gbenson@redhat.com>
3034 * target.h (struct target_ops) <to_fileio_fstat>: New field.
3035 (target_fileio_fstat): New declaration.
3036 * target.c (target_fileio_fstat): New function.
3037 * inf-child.c (inf_child_fileio_fstat): Likewise.
3038 (inf_child_target): Initialize to_fileio_fstat.
3039 * remote.c (init_remote_ops): Likewise.
3041 2015-04-01 Sasha Smundak <asmundak@google.com>
3043 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
3044 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
3045 (py-unwind.o): New recipe.
3046 * NEWS: mention Python frame unwinding.
3047 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
3048 gdb/unwinder.py and gdb/command/unwinder.py
3049 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
3051 (execute_unwinders): New function.
3052 * python/lib/gdb/command/unwinders.py: New file.
3053 * python/lib/gdb/unwinder.py: New file.
3054 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
3055 (objfpy_dealloc): Decrement frame_unwinders reference count.
3056 (objfpy_initialize): Create frame_unwinders list.
3057 (objfpy_get_frame_unwinders): New function.
3058 (objfpy_set_frame_unwinders): Ditto.
3059 (objfile_getset): Add frame_unwinders attribute to Objfile.
3060 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
3061 (pspy_dealloc): Decrement frame_unwinders reference count.
3062 (pspy_initialize): Create frame_unwinders list.
3063 (pspy_get_frame_unwinders): New function.
3064 (pspy_set_frame_unwinders): Ditto.
3065 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
3066 * python/py-unwind.c: New file.
3067 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
3068 (objpy_get_frame_unwinders): New prototype.
3069 (gdbpy_initialize_unwind): New prototype.
3070 * python/python.c (gdbpy_apply_type_printers): Call
3071 gdbpy_initialize_unwind.
3073 2015-04-01 Pedro Alves <palves@redhat.com>
3075 * infrun.c (resume): Check currently_stepping after clearing
3076 stepped_breakpoint, not before.
3078 2015-04-01 Pedro Alves <palves@redhat.com>
3080 * infrun.c (print_target_wait_results): Print all the ptid
3083 2015-04-01 Pedro Alves <palves@redhat.com>
3085 * infrun.c (keep_going): Also discard cleanups if inserting
3088 2015-04-01 Pedro Alves <palves@redhat.com>
3090 * infrun.c (wait_for_inferior): Install the
3091 finish_thread_state_cleanup cleanup across the whole function, not
3092 just around handle_inferior_event.
3094 2015-04-01 Pedro Alves <palves@redhat.com>
3096 * infrun.c (resume) <step past permanent breakpoint>: Use
3099 2015-04-01 Pedro Alves <palves@redhat.com>
3101 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
3103 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
3105 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
3107 2015-04-01 Pedro Alves <palves@redhat.com>
3109 * linux-thread-db.c (record_thread): Readd the thread to gdb's
3110 list if it was marked exited.
3112 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
3114 * configure: Regenerated.
3116 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
3117 Jan Kratochvil <jan.kratochvil@redhat.com>
3118 Oleg Nesterov <oleg@redhat.com>
3121 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
3122 New enum identifying the various options of the coredump_filter
3124 (struct smaps_vmflags): New struct.
3125 (use_coredump_filter): New variable.
3126 (decode_vmflags): New function.
3127 (mapping_is_anonymous_p): Likewise.
3128 (dump_mapping_p): Likewise.
3129 (linux_find_memory_regions_full): New variables
3130 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
3131 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
3132 parsing of its information. Implement memory mapping filtering
3133 based on its contents.
3134 (show_use_coredump_filter): New function.
3135 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
3136 * NEWS: Mention the possibility of using the
3137 '/proc/PID/coredump_filter' file when generating a corefile.
3138 Mention new command 'set use-coredump-filter'.
3140 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
3142 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
3143 read_memory_unsigned_integer.
3145 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
3147 * Makefile.in (ZLIB): New.
3148 (ZLIBINC): Likewise.
3149 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
3150 (CLIBS): Add $(ZLIB).
3151 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
3153 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
3154 * top.c (print_gdb_configuration): Remove --with-zlib and
3156 * config.in: Regenerated.
3157 * configure: Likewise.
3159 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
3161 * NEWS: Mention info os cpus support.
3162 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
3163 (struct osdata_type): Add cpus entry, reorder the entries in
3166 2015-03-31 Matthias Klose <doko@ubuntu.com>
3168 * compile/compile.c (compile_to_object): Allow triplets with or
3171 2015-03-30 Doug Evans <dje@google.com>
3174 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
3175 klass in VAR_DOMAIN.
3177 2015-03-30 Gary Benson <gbenson@redhat.com>
3179 * remote.c (remote_mourn_1): Remove function. Update all callers
3180 to use remote_mourn.
3181 (extended_remote_mourn_1): Remove function. Update all callers
3182 to use extended_remote_mourn.
3183 (extended_remote_attach_1): Remove function. Update all callers
3184 to use extended_remote_attach.
3186 2015-03-28 James Bowman <james.bowman@ftdichip.com>
3188 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
3189 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
3190 (ALLDEPFILES): Add ft32-tdep.c.
3191 * configure.tgt: Add FT32 entry.
3192 * ft32-tdep.c: New file, FT32 target-dependent code.
3193 * ft32-tdep.h: New file, FT32 target-dependent code.
3195 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
3198 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3200 * printcmd.c (print_command_1): Move expr variable scope.
3202 2015-03-27 Joel Brobecker <brobecker@adacore.com>
3204 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
3206 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
3208 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
3211 2015-03-26 Joel Brobecker <brobecker@adacore.com>
3213 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
3214 exception raised while parsing the probe arguments.
3215 Force parsing to be done using the C language parser.
3216 * expression.h (parse_expression_with_language): Declare.
3217 * parse.c (parse_expression_with_language): New function.
3219 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
3221 * MAINTAINERS (Write After Approval): Add "Jon Turney".
3223 2015-03-26 Andy Wingo <wingo@igalia.com>
3226 * dwarf2read.c (struct partial_die_info): Add has_const_value
3228 (add_partial_symbol): Don't punt on symbols that have const_value
3230 (read_partial_die): Detect DW_AT_const_value.
3232 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3235 * printcmd.c (print_command_1): Move expr variable scope.
3237 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3240 * printcmd.c (validate_format): Make the parameter cmdname const.
3242 2015-03-26 Don Breazeal <donb@codesourcery.com>
3244 * remote.c (_initialize_remote): Update comment.
3246 2015-03-26 Pedro Alves <palves@redhat.com>
3247 Jon TURNEY <jon.turney@dronecode.org.uk>
3249 * coffread.c (coff_symfile_read): When constructing the name of an
3250 import stub symbol from import symbol for amd64, only skip the
3251 char after _imp_ if the target is underscored (like i386) and the
3252 char is indeed the target's leading char.
3254 2015-03-25 Pedro Alves <palves@redhat.com>
3256 * target.h <to_async>: Replace 'callback' and 'context' parameters
3257 with boolean 'enable' parameter.
3258 (target_async): Replace CALLBACK and CONTEXT parameters with
3259 boolean ENABLE parameter.
3260 * inf-loop.c (inferior_event_handler): Adjust.
3261 * linux-nat.c (linux_nat_attach, linux_nat_resume)
3262 (linux_nat_resume): Adjust.
3263 (async_client_callback, async_client_context): Delete.
3264 (handle_target_event): Call inferior_event_handler directly.
3265 (linux_nat_async): Replace 'callback' and 'context' parameters
3266 with boolean 'enable' parameter. Adjust. Remove references to
3267 async_client_callback and async_client_context.
3268 (linux_nat_close): Adjust.
3269 * record-btrace.c (record_btrace_async): Replace 'callback' and
3270 'context' parameters with boolean 'enable' parameter. Adjust.
3271 (record_btrace_resume): Adjust.
3272 * record-full.c (record_full_async): Replace 'callback' and
3273 'context' parameters with boolean 'enable' parameter. Adjust.
3274 (record_full_resume, record_full_core_resume): Adjust.
3275 * remote.c (struct remote_state) <async_client_callback,
3276 async_client_context>: Delete fields.
3277 (remote_start_remote, extended_remote_attach_1, remote_resume)
3278 (extended_remote_create_inferior): Adjust.
3279 (remote_async_serial_handler): Call inferior_event_handler
3281 (remote_async): Replace 'callback' and 'context' parameters with
3282 boolean 'enable' parameter. Adjust.
3283 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
3285 * target-delegates.c: Regenerate.
3287 2015-03-25 Gary Benson <gbenson@redhat.com>
3288 Pedro Alves <palves@redhat.com>
3290 * target.c (fileio_ft_t): New typedef, define object vector.
3291 (fileio_fhandles): New static variable.
3292 (is_closed_fileio_fh): New macro.
3293 (lowest_closed_fd): New static variable.
3294 (acquire_fileio_fd): New function.
3295 (release_fileio_fd): Likewise.
3296 (fileio_fd_to_fh): New macro.
3297 (target_fileio_open): Wrap the file descriptor on success.
3298 (target_fileio_pwrite): Updated to use wrapped file descriptor.
3299 (target_fileio_pread): Likewise.
3300 (target_fileio_close): Likewise.
3302 2015-03-24 Pedro Alves <palves@redhat.com>
3304 * thread.c (thread_apply_all_command): Take exited threads into
3307 2015-03-24 Pedro Alves <palves@redhat.com>
3309 * infrun.c (resume, proceed): Mention
3310 switch_back_to_stepped_thread, not switch_back_to_stepping.
3312 2015-03-24 Pedro Alves <palves@redhat.com>
3314 * infrun.c (user_visible_resume_ptid): Rewrite going from
3315 most-locked to unlocked instead of the opposite. Move comment ...
3316 * infrun.h (user_visible_resume_ptid): ... here.
3318 2015-03-24 Pedro Alves <palves@redhat.com>
3320 * linux-nat.c (linux_nat_resume): Output debug logs before trying
3321 to resume the event lwp. Use the lwp's ptid instead of the passed
3322 in (maybe wildcard) ptid.
3323 (stop_wait_callback): Tweak debug log output.
3324 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
3326 (linux_nat_filter_event): In debug output, distinguish a
3327 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
3328 before trying to resume the lwp.
3330 2015-03-24 Joel Brobecker <brobecker@adacore.com>
3332 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
3333 pointer indirection.
3334 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
3335 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
3337 2015-03-24 Joel Brobecker <brobecker@adacore.com>
3339 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
3340 Renames DYN_ATTR_DATA_LOCATION.
3341 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
3342 DYN_ATTR_DATA_LOCATION.
3343 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
3344 instead of DYN_ATTR_DATA_LOCATION.
3346 2015-03-24 Pedro Alves <palves@redhat.com>
3348 * breakpoint.c (until_break_command): Adjust call to proceed.
3349 * gdbthread.h (struct thread_control_state) <stepping_command>:
3351 * infcall.c (run_inferior_call): Adjust call to proceed.
3352 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
3353 Adjust calls to proceed.
3354 (set_step_frame): Set the current thread's step_start_function
3356 (step_once): Adjust calls to proceed.
3357 (jump_command, signal_command, until_next_command)
3358 (finish_backward, finish_forward, proceed_after_attach_callback)
3359 (attach_command_post_wait): Adjust calls to proceed.
3360 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
3361 (do_target_resume): New function, factored out from ...
3362 (resume): ... here. Remove 'step' parameter. Instead, check
3363 currently_stepping to determine whether the thread should be
3365 (proceed): Remove 'step' parameter and don't set the thread's
3366 step_start_function here. Adjust call to 'resume'.
3367 (handle_inferior_event): Adjust calls to 'resume'.
3368 (switch_back_to_stepped_thread): Use do_target_resume instead of
3370 (keep_going): Adjust calls to 'resume'.
3371 * infrun.h (proceed): Remove 'step' parameter.
3373 * windows-nat.c (do_initial_windows_stuff): Adjust call to
3375 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
3377 2015-03-24 Pedro Alves <palves@redhat.com>
3379 * gdbthread.h (struct thread_control_state) <stepping_command>:
3381 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
3382 the thread's stepping_command field.
3383 * infrun.c (resume): Check the thread's stepping_command flag to
3384 determine which threads should be resumed. Rename 'entry_step'
3386 (clear_proceed_status_thread): Clear 'stepping_command'.
3387 (schedlock_applies): Change parameter type to struct thread_info
3389 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
3390 (switch_back_to_stepped_thread): Adjust calls to
3391 'schedlock_applies'.
3392 (_initialize_infrun): Adjust "set scheduler-locking step" help.
3394 2015-03-24 Pedro Alves <palves@redhat.com>
3396 * infrun.c (step_start_function): Delete and ...
3397 * gdbthread.h (struct thread_control_state) <step_start_function>:
3398 ... now a field here.
3399 * infrun.c (clear_proceed_status_thread): Clear the thread's
3400 step_start_function.
3401 (proceed, process_event_stop_test, print_stop_event): Adjust.
3403 2015-03-24 Pedro Alves <palves@redhat.com>
3405 * infrun.c (proceed): No longer handle negative step.
3407 2015-03-24 Gary Benson <gbenson@redhat.com>
3409 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
3410 (x86_linux_prepare_to_resume): Likewise.
3411 * x86-linux-nat.c (x86_linux_new_thread):
3412 Moved to nat/x86-linux.c.
3413 (x86_linux_prepare_to_resume): Likewise.
3414 * nat/x86-linux.c (x86_linux_new_thread): New function.
3415 (x86_linux_prepare_to_resume): Likewise.
3417 2015-03-24 Gary Benson <gbenson@redhat.com>
3419 * nat/x86-linux-dregs.h: New file.
3420 * nat/x86-linux-dregs.c: Likewise.
3421 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
3422 (x86-linux-dregs.o): New rule.
3423 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
3424 * config/i386/linux64.mh (NATDEPFILES): Likewise.
3425 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
3426 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
3427 (x86_linux_dr_get): Likewise.
3428 (x86_linux_dr_set): Likewise.
3429 (x86_linux_dr_get_addr): Likewise.
3430 (x86_linux_dr_get_control): Likewise.
3431 (x86_linux_dr_get_status): Likewise.
3432 (update_debug_registers_callback): Likewise.
3433 (x86_linux_dr_set_control): Likewise.
3434 (x86_linux_dr_set_addr): Likewise.
3435 (x86_linux_update_debug_registers): Likewise.
3437 2015-03-24 Gary Benson <gbenson@redhat.com>
3439 * x86-linux-nat.c (x86_linux_update_debug_registers):
3440 New function, factored out from...
3441 (x86_linux_prepare_to_resume): ...this.
3443 2015-03-24 Gary Benson <gbenson@redhat.com>
3445 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
3446 (x86_linux_dr_set): Likewise.
3447 (x86_linux_dr_get_addr): Likewise.
3448 (x86_linux_dr_get_control): Likewise.
3449 (x86_linux_dr_get_status): Likewise.
3450 (update_debug_registers_callback): Likewise.
3451 (x86_linux_dr_set_control): Likewise.
3452 (x86_linux_dr_set_addr): Likewise.
3453 (x86_linux_prepare_to_resume): Likewise.
3454 (x86_linux_new_thread): Likewise.
3456 2015-03-24 Gary Benson <gbenson@redhat.com>
3458 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
3459 (x86_linux_new_thread): Rename argument.
3461 2015-03-24 Gary Benson <gbenson@redhat.com>
3463 * nat/x86-linux.h: New file.
3464 * nat/x86-linux.c: Likewise.
3465 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
3466 (x86-linux.o): New rule.
3467 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
3468 * config/i386/linux64.mh (NATDEPFILES): Likewise.
3469 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
3470 (lwp_set_arch_private_info): New declaration.
3471 (lwp_arch_private_info): Likewise.
3472 * linux-nat.c (lwp_set_arch_private_info): New function.
3473 (lwp_arch_private_info): Likewise.
3474 * x86-linux-nat.c: Include nat/x86-linux.h.
3475 (arch_lwp_info): Removed structure.
3476 (update_debug_registers_callback):
3477 Use lwp_set_debug_registers_changed.
3478 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
3479 and lwp_set_debug_registers_changed.
3480 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
3482 2015-03-24 Gary Benson <gbenson@redhat.com>
3484 * nat/linux-nat.h (ptid_of_lwp): New declaration.
3485 (lwp_is_stopped): Likewise.
3486 (lwp_stop_reason): Likewise.
3487 * linux-nat.c (ptid_of_lwp): New function.
3488 (lwp_is_stopped): Likewise.
3489 (lwp_is_stopped_by_watchpoint): Likewise.
3490 * x86-linux-nat.c (update_debug_registers_callback):
3492 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
3495 2015-03-24 Gary Benson <gbenson@redhat.com>
3497 * linux-nat.h (linux_stop_lwp): Move declaration to...
3498 * nat/linux-nat.h (linux_stop_lwp): New declaration.
3500 2015-03-24 Gary Benson <gbenson@redhat.com>
3502 * linux-nat.h: Include nat/linux-nat.h.
3503 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
3504 * nat/linux-nat.h (struct lwp_info): New forward declaration.
3505 (iterate_over_lwps_ftype): New typedef.
3506 (iterate_over_lwps): New declaration.
3507 * linux-nat.h (iterate_over_lwps): Update comment. Use
3508 iterate_over_lwps_ftype. Update callback return value check.
3510 2015-03-24 Gary Benson <gbenson@redhat.com>
3512 * x86-nat.h (x86_debug_reg_state): Move declaration to...
3513 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
3515 2015-03-24 Gary Benson <gbenson@redhat.com>
3517 * nat/linux-nat.h (current_lwp_ptid): New declaration.
3518 * linux-nat.c (current_lwp_ptid): New function.
3519 * x86-linux-nat.c: Include nat/linux-nat.h.
3520 (x86_linux_dr_get_addr): Use current_lwp_ptid.
3521 (x86_linux_dr_get_control): Likewise.
3522 (x86_linux_dr_get_status): Likewise.
3523 (x86_linux_dr_set_control): Likewise.
3524 (x86_linux_dr_set_addr): Likewise.
3526 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
3528 PR breakpoints/16466
3529 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
3531 2015-03-23 Joel Brobecker <brobecker@adacore.com>
3533 * ser-mingw.c (ser_windows_setparity): Fix indentation.
3534 * ser-unix.c (hardwire_setparity): Likewise.
3536 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
3538 * NEWS: Mention set/show serial parity command.
3539 * monitor.c (monitor_open): Call serial_setparity.
3540 * remote.c (remote_open_1): Likewise.
3541 * ser-base.c (ser_base_serparity): New function.
3542 * ser-base.h (ser_base_setparity): Add declaration.
3543 * ser-go32.c (dos_ops): Set "setparity" field.
3544 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
3546 (ser_windows_setparity): New function.
3547 (hardwire_ops): Add ser_windows_setparity.
3548 (tty_ops): Add NULL for setparity field.
3549 (pipe_ops): Add ser_base_setparity.
3550 (tcp_ops): Likewise.
3551 * ser-pipe.c (pipe_ops): Likewise.
3552 * ser-tcp.c (tcp_ops): Likewise.
3553 * ser-unix.c (hardwire_setparity): Add declaration.
3554 (hardwire_raw): Don't reset PARENB flag.
3555 (hardwire_setparity): New function.
3556 (hardwire_ops): Add hardwire_setparity.
3557 * serial.c (serial_setparity): New function.
3558 (serial_parity): New global.
3559 (parity_none, parity_odd, parity_even, parity_enums, parity):
3561 (set_parity): New function.
3562 (_initialize_serial): Add set/show serial parity commands.
3563 * serial.h (GDBPARITY_NONE): Define.
3564 (GDBPARITY_ODD): Define.
3565 (GDBPARITY_EVEN): Define.
3566 (serial_setparity) Add declaration.
3567 (struct serial_ops): Add setparity field.
3568 * target.h (serial_parity): Add declaration.
3570 2015-03-23 Keith Seitz <keiths@redhat.com>
3572 * linespec.c (linespec_lexer_lex_keyword): Update comment.
3574 2015-03-23 Keith Seitz <keiths@redhat.com>
3576 * breakpoint.c (parse_breakpoint_sals): Use
3577 linespec_lexer_lex_keyword to ascertain if the user specified
3579 * linespec.c [IF_KEYWORD_INDEX]: Define.
3580 (linespec_lexer_lex_keyword): Export.
3581 (struct ls_parser) <keyword_ok>: Remove.
3582 A keyword is only a keyword if not followed by another keyword.
3583 (linespec_lexer_lex_one): Remove keyword_ok handling.
3584 Add comment explaining why the parsing stream is not advanced
3585 when a keyword is seen.
3586 (parse_linespec): Remove parser->keyword_ok.
3587 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
3589 2015-03-23 Keith Seitz <keiths@redhat.com>
3592 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
3593 if we find a static method with DW_AT_vtable_elem_location.
3595 2015-03-21 Eli Zaretskii <eliz@gnu.org>
3597 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
3598 before the second loop, to avoid undefined behavior. Reported by
3599 Anton Blanchard <anton@samba.org>.
3601 2015-03-20 Keven Boell <keven.boell@intel.com>
3603 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
3604 data_location usage to linked list.
3605 (resolve_dynamic_type_internal): Adapt data_location to
3607 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
3608 (copy_type_recursive, copy_type): Add copy of linked list.
3609 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
3610 (struct dynamic_prop_list): New struct.
3611 * dwarf2read.c (set_die_type): Set data_location data.
3613 2015-03-20 Pedro Alves <palves@redhat.com>
3615 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
3616 inner block and make it const.
3617 * machoread.c (get_archive_prefix_len): Make "lparen" const.
3619 2015-03-20 Pedro Alves <palves@redhat.com>
3621 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
3622 * breakpoint.h (set_breakpoint_condition): Update declaration.
3624 2015-03-20 Pedro Alves <palves@redhat.com>
3626 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
3628 2015-03-20 Pedro Alves <palves@redhat.com>
3630 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
3632 2015-03-20 Pedro Alves <palves@redhat.com>
3634 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
3636 2015-03-20 Pedro Alves <palves@redhat.com>
3638 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
3639 (nto_init_solib_absolute_prefix): Likewise.
3641 2015-03-20 Pedro Alves <palves@redhat.com>
3643 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
3644 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
3646 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
3648 * config/djgpp/README: Remove gdb.hp.
3650 2015-03-20 Yao Qi <yao.qi@linaro.org>
3652 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
3653 set_gdbarch_cannot_step_breakpoint.
3655 2015-03-19 Pedro Alves <palves@redhat.com>
3657 * linux-nat.c (linux_resume_one_lwp): Rename to ...
3658 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
3659 instead call perror_with_name.
3660 (check_ptrace_stopped_lwp_gone): New function.
3661 (linux_resume_one_lwp): Reimplement as wrapper around
3662 linux_resume_one_lwp_throw that swallows errors if the LWP is
3664 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
3665 swallows errors if the LWP is gone. Use
3666 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
3668 2015-03-19 Pedro Alves <palves@redhat.com>
3670 * linux-nat.c (status_callback): Return early if the LWP has no
3673 2015-03-19 Pedro Alves <palves@redhat.com>
3675 * linux-nat.c (select_event_lwp_callback): Update comment to no
3676 longer mention SIGTRAP.
3678 2015-03-18 Tristan Gingold <gingold@adacore.com>
3680 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
3681 redirection code to ...
3682 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
3683 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
3685 2015-03-18 Gary Benson <gbenson@redhat.com>
3687 (remote_protocol_features): Remove the "vFile:fstat" feature.
3688 (remote_hostio_fstat): Probe for "vFile:fstat" support.
3690 2015-03-11 Yao Qi <yao.qi@linaro.org>
3693 * aarch64-linux-tdep.c: Include xml-syscall.h
3694 (aarch64_linux_get_syscall_number): New function.
3695 (aarch64_linux_init_abi): Call
3696 set_gdbarch_get_syscall_number.
3697 * syscalls/aarch64-linux.xml: New file.
3699 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
3701 * ser-base.h (ser_base_setstopbits): Change second argument name
3702 from "rate" to "num".
3704 2015-03-17 Gary Benson <gbenson@redhat.com>
3705 Luke Allardyce <lukeallardyce@gmail.com>
3708 * common/common-remote-fileio.h (sys/stat.h): New include.
3709 (stuct stat): Remove forward declaration.
3711 2015-03-16 John Baldwin <jhb@FreeBSD.org>
3713 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
3714 before writing core register notes.
3716 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
3717 Pedro Alves <palves@redhat.com>
3719 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
3720 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
3721 (tgoto): Wrap with extern "C".
3723 2015-03-16 Pedro Alves <palves@redhat.com>
3724 Yuanhui Zhang <asmwarrior@gmail.com>
3726 * stub-termcap.c (tputs): Change prototype.
3728 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
3729 Pedro Alves <palves@redhat.com>
3731 * windows-nat.c (struct thread_info_struct): Rename to ...
3732 (struct windows_thread_info_struct): ... this.
3733 (thread_info): Rename to ...
3734 (windows_thread_info): ... this.
3737 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
3738 Pedro Alves <palves@redhat.com>
3740 * NEWS: New Removed targets and native configurations.
3742 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3745 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
3746 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
3747 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
3748 ia64-hpux-tdep.h, solib-ia64-hpux.h.
3749 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
3750 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
3751 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
3753 * config/ia64/hpux.mh: Remove file.
3754 * config/pa/hpux.mh: Remove file.
3755 * configure: Rebuilt.
3756 * configure.ac (dlgetmodinfo, somread.o): Remove.
3757 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3758 (ia64-*-hpux*): Remove its float format exception.
3759 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3760 * hppa-hpux-nat.c: Remove file.
3761 * hppa-hpux-tdep.c: Remove file.
3762 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
3763 Move them here from hppa-tdep.h
3764 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
3765 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
3766 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
3767 Move them to hppa-tdep.c.
3768 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
3770 * ia64-hpux-nat.c: Remove file.
3771 * ia64-hpux-tdep.c: Remove file.
3772 * ia64-hpux-tdep.h: Remove file.
3773 * inf-ttrace.c: Remove file.
3774 * inf-ttrace.h: Remove file.
3775 * solib-ia64-hpux.c: Remove file.
3776 * solib-ia64-hpux.h: Remove file.
3777 * solib-pa64.c: Remove file.
3778 * solib-pa64.h: Remove file.
3779 * solib-som.c: Remove file.
3780 * solib-som.h: Remove file.
3781 * somread.c: Remove file.
3783 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3785 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
3786 * config.in: Regenerate.
3787 * configure: Regenerate.
3788 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
3790 (fbsd_find_memory_regions): Use kinfo_getvmmap to
3791 enumerate memory regions if present.
3793 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3795 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
3796 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
3798 (i386fbsd_sigtramp_p): Likewise.
3800 2015-03-12 John Baldwin <jhb@FreeBSD.org>
3802 * MAINTAINERS (Write After Approval): Add John Baldwin.
3804 2015-03-12 Gary Benson <gbenson@redhat.com>
3806 * solib.c (_initialize_solib): Make "set/show sysroot" use
3807 add_setshow_optional_filename_cmd so it can be restored to
3808 empty after being set.
3810 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3812 * Makefile.in (SFILES): New source break-catch-syscall.c.
3813 (COMMON_OBS): New object break-catch-syscall.o.
3814 * break-catch-syscall.c: New file.
3815 * breakpoint.c: Remove inclusion of "xml-syscall.h".
3816 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
3817 (struct syscall_catchpoint): Likewise.
3818 (dtor_catch_syscall): Likewise.
3819 (catch_syscall_inferior_data): Likewise.
3820 (struct catch_syscall_inferior_data): Likewise.
3821 (get_catch_syscall_inferior_data): Likewise.
3822 (catch_syscall_inferior_data_cleanup): Likewise.
3823 (insert_catch_syscall): Likewise.
3824 (remove_catch_syscall): Likewise.
3825 (breakpoint_hit_catch_syscall): Likewise.
3826 (print_it_catch_syscall): Likewise.
3827 (print_one_catch_syscall): Likewise.
3828 (print_mention_catch_syscall): Likewise.
3829 (print_recreate_catch_syscall): Likewise.
3830 (catch_syscall_breakpoint_ops): Likewise.
3831 (syscall_catchpoint_p): Likewise.
3832 (create_syscall_event_catchpoint): Likewise.
3833 (catch_syscall_split_args): Likewise.
3834 (catch_syscall_command_1): Likewise.
3835 (is_syscall_catchpoint_enabled): Likewise.
3836 (catch_syscall_enabled): Likewise.
3837 (catching_syscall_number): Likewise.
3838 (catch_syscall_completer): Likewise.
3839 (clear_syscall_counts): Likewise.
3840 (initialize_breakpoint_ops): Move initialization of syscall
3841 catchpoints to break-catch-syscall.c.
3842 (_initialize_breakpoint): Move code related to syscall catchpoints
3843 to break-catch-syscall.c.
3845 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3847 * breakpoint.c (breakpoint_find_if): New function.
3848 * breakpoint.h (breakpoint_find_if): New prototype.
3850 2015-03-11 Gary Benson <gbenson@redhat.com>
3852 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
3853 * remote-fileio.c (remote_fileio_to_host_uint): New function.
3854 (remote_fileio_to_host_ulong): Likewise.
3855 (remote_fileio_to_host_mode): Likewise.
3856 (remote_fileio_to_host_time): Likewise.
3857 (remote_fileio_to_host_stat): Likewise.
3858 * remote.c (PACKET_vFile_fstat): New enum value.
3859 (remote_protocol_features): Register the "vFile:fstat" feature.
3860 (remote_hostio_fstat): New function.
3861 (remote_bfd_iovec_stat): Use the above.
3862 (_initialize_remote): Register new "set/show remote
3863 hostio-fstat-packet" command.
3864 * symfile.c (separate_debug_file_exists): Update comment.
3865 * NEWS: Announce new vFile:fstat packet.
3867 2015-03-11 Gary Benson <gbenson@redhat.com>
3869 * common/common-remote-fileio.h: New file.
3870 * common/common-remote-fileio.c: Likewise.
3871 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
3872 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
3873 (COMMON_OBS): Add common-remote-fileio.o.
3874 (common-remote-fileio.o): New rule.
3875 * remote-fileio.h (common-remote-fileio.h): New include.
3876 * remote-fileio.c (gdb/fileio.h): Do not include.
3877 (remote_fileio_to_be): Moved to common-remote-fileio.h.
3878 (remote_fileio_to_fio_uint): Likewise.
3879 (remote_fileio_to_fio_time): Likewise.
3880 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
3881 (remote_fileio_to_fio_mode): Likewise.
3882 (remote_fileio_to_fio_ulong): Likewise.
3883 (remote_fileio_to_fio_stat): Likewise.
3885 2015-03-11 Andy Wingo <wingo@igalia.com>
3887 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
3888 we were checking the cached type, not the cached dynamic type.
3890 2015-03-11 Andy Wingo <wingo@igalia.com>
3892 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
3893 other strings, as these are on the GC'd heap, and will be
3894 collected along with the smob.
3896 2015-03-11 Andy Wingo <wingo@igalia.com>
3898 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
3899 (objfile_functions): Bind gdbscm_objfile_progspace to
3901 * guile/lib/gdb.scm: Add objfile-progspace to exports.
3903 2015-03-11 Andy Wingo <wingo@igalia.com>
3905 * guile/guile.c (_initialize_guile): Disable automatic
3906 finalization, if Guile offers us that possibility.
3907 * guile/guile.c (call_initialize_gdb_module):
3908 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
3909 finalizers in appropriate places.
3910 * configure.ac (AC_TRY_LIBGUILE): Add a check for
3911 scm_set_automatic_finalization_enabled.
3912 * configure: Regenerated.
3914 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3916 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
3919 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3921 * s390-linux-nat.c (struct arch_lwp_info): New.
3922 (s390_fix_watch_points): Rename to...
3923 (s390_prepare_to_resume): ...this. Skip the PER info update
3924 unless the watch points have changed.
3925 (s390_refresh_per_info, s390_new_thread): New functions.
3926 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
3927 s390_fix_watch_points.
3928 (s390_remove_watchpoint): Likewise.
3929 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
3930 Register s390_prepare_to_resume.
3932 2015-03-09 Pedro Alves <palves@redhat.com>
3935 2015-03-07 Pedro Alves <palves@redhat.com>
3936 * common/gdb_socket.h: New file.
3937 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3939 (net_open): Use union gdb_sockaddr_u.
3941 2015-03-07 Pedro Alves <palves@redhat.com>
3943 * configure.ac (build_warnings): Move -Wmissing-prototypes
3944 -Wdeclaration-after-statement -Wmissing-parameter-type
3945 -Wold-style-declaration -Wold-style-definition to the C-specific
3947 * configure: Regenerate.
3949 2015-03-07 Pedro Alves <palves@redhat.com>
3951 * common/gdb_socket.h: New file.
3952 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3954 (net_open): Use union gdb_sockaddr_u.
3956 2015-03-07 Pedro Alves <palves@redhat.com>
3958 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
3959 (exceptions_state_mc_action_iter)
3960 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3962 [__cplusplus] (try_scope_depth): New global.
3963 [__cplusplus] (exception_try_scope_entry)
3964 (exception_try_scope_exit, gdb_exception_sliced_copy)
3965 (exception_rethrow): New functions.
3966 (throw_exception): In C++ mode, throw
3967 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
3968 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
3969 (throw_it): In C++ mode, use try_scope_depth.
3970 * common/common-exceptions.h [!__cplusplus]
3971 (exceptions_state_mc_action_iter)
3972 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3974 [__cplusplus] (exception_try_scope_entry)
3975 (exception_try_scope_exit, exception_rethrow): Declare.
3976 [__cplusplus] (struct exception_try_scope): New struct.
3977 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
3979 (struct gdb_exception_RETURN_MASK_ALL)
3980 (struct gdb_exception_RETURN_MASK_ERROR)
3981 (struct gdb_exception_RETURN_MASK_QUIT): New types.
3983 2015-03-07 Pedro Alves <palves@redhat.com>
3985 * main.c (handle_command_errors): Remove volatile qualifier from
3988 2015-03-07 Pedro Alves <palves@redhat.com>
3990 * breakpoint.c (save_breakpoints): Adjust to avoid code between
3992 * gdbtypes.c (safe_parse_type): Remove empty line.
3993 (types_deeply_equal):
3994 * guile/scm-frame.c (gdbscm_frame_name):
3995 * linux-thread-db.c (find_new_threads_once):
3996 * python/py-breakpoint.c (bppy_get_commands):
3997 * record-btrace.c (record_btrace_insert_breakpoint)
3998 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
3999 (record_btrace_start_replaying): Adjust to avoid code between TRY
4002 2015-03-07 Pedro Alves <palves@redhat.com>
4004 * common/common-exceptions.c (struct catcher) <exception>: No
4005 longer a pointer to volatile exception. Now an exception value.
4006 <mask>: Delete field.
4007 (exceptions_state_mc_init): Remove all parameters. Adjust.
4008 (exceptions_state_mc): No longer pop the catcher here.
4009 (exceptions_state_mc_catch): New function.
4010 (throw_exception): Adjust.
4011 * common/common-exceptions.h (exceptions_state_mc_init): Remove
4013 (exceptions_state_mc_catch): Declare.
4014 (TRY_CATCH): Rename to ...
4015 (TRY): ... this. Remove EXCEPTION and MASK parameters.
4016 (CATCH, END_CATCH): New.
4017 All callers adjusted.
4019 2015-03-07 Tom Tromey <tromey@redhat.com>
4021 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
4023 2015-03-07 Pedro Alves <palves@redhat.com>
4025 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
4026 (amd64_epilogue_frame_cache): Normal exception handling code.
4027 * break-catch-throw.c (check_status_exception_catchpoint)
4028 (re_set_exception_catchpoint): Ditto.
4029 * cli/cli-interp.c (safe_execute_command):
4030 * cli/cli-script.c (script_from_file): Ditto.
4031 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
4033 * compile/compile-object-run.c (compile_object_run): Ditto.
4034 * cp-abi.c (baseclass_offset): Ditto.
4035 * cp-valprint.c (cp_print_value): Ditto.
4036 * exceptions.c (catch_exceptions_with_msg):
4037 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
4038 * frame.c (get_frame_address_in_block_if_available): Ditto.
4039 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
4040 (i386_sigtramp_frame_cache): Ditto.
4041 * infcmd.c (post_create_inferior): Ditto.
4042 * linespec.c (parse_linespec, find_linespec_symbols):
4043 * p-valprint.c (pascal_object_print_value): Ditto.
4044 * parse.c (parse_expression_for_completion): Ditto.
4045 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
4046 * remote.c (remote_get_noisy_reply): Ditto.
4047 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
4048 * solib-svr4.c (solib_svr4_r_map): Ditto.
4050 2015-03-06 Gary Benson <gbenson@redhat.com>
4052 * common/common-utils.h (startswith): New inline function.
4053 All places where this logic was used updated to use the above.
4055 2015-03-05 Pedro Alves <palves@redhat.com>
4058 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
4059 after reading the breakpoint's shadow memory.
4061 2015-03-05 Mark Kettenis <kettenis@gnu.org>
4063 * hppabsd-nat.c: Remove file.
4064 * hppaobsd-nat.c: New file.
4065 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
4067 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
4070 2015-03-04 Pedro Alves <palves@redhat.com>
4072 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
4073 (target_decr_pc_after_break): Delete declaration.
4074 * target.c (default_target_decr_pc_after_break)
4075 (target_decr_pc_after_break): Delete.
4076 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
4077 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
4078 * linux-thread-db.c (check_event): Likewise.
4079 * infrun.c (adjust_pc_after_break): Likewise.
4080 * darwin-nat.c (cancel_breakpoint): Likewise.
4081 * aix-thread.c (aix_thread_wait): Likewise.
4082 * target-delegates.c: Regenerate.
4084 2015-03-04 Pedro Alves <palves@redhat.com>
4086 * linux-nat.c (save_sigtrap): Check for breakpoints before
4087 checking watchpoints.
4088 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
4089 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
4090 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
4091 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
4092 (linux_nat_stopped_by_sw_breakpoint)
4093 (linux_nat_supports_stopped_by_sw_breakpoint)
4094 (linux_nat_stopped_by_hw_breakpoint)
4095 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
4096 (linux_nat_wait_1): Don't re-increment the PC if relying on
4097 SIGTRAP's siginfo->si_code.
4098 (linux_nat_add_target): Install new target methods.
4099 * linux-thread-db.c (check_event): Don't account for breakpoint PC
4100 offset if the target already adjusted the PC.
4101 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
4102 (GDB_ARCH_TRAP_BRKPT): New.
4103 (TRAP_HWBKPT): Define if not already defined.
4105 2015-03-04 Pedro Alves <palves@redhat.com>
4107 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
4108 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
4110 <stop_reason>: New field.
4111 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
4112 (packet_set_cmd_state): New function.
4113 (remote_protocol_features): Register the "swbreak" and "hwbreak"
4115 (remote_query_supported): If not disabled with the corresponding
4116 "set remote foo-packet" command, report support for the swbreak
4117 and hwbreak features.
4118 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
4120 <stop_reason>: New field.
4121 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
4122 (remote_wait_as): Adjust.
4123 (remote_stopped_by_sw_breakpoint)
4124 (remote_supports_stopped_by_sw_breakpoint)
4125 (remote_stopped_by_hw_breakpoint)
4126 (remote_supports_stopped_by_hw_breakpoint): New functions.
4127 (remote_stopped_by_watchpoint): New function.
4128 (init_remote_ops): Install them.
4129 (_initialize_remote): Register new "set/show remote
4130 swbreak-feature-packet" and "set/show remote
4131 swbreak-feature-packet" commands.
4133 2015-03-04 Pedro Alves <palves@redhat.com>
4135 * btrace.h: Include target/waitstatus.h.
4136 (struct btrace_thread_info) <stop_reason>: New field.
4137 * record-btrace.c (record_btrace_step_thread): Use
4138 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
4139 (record_btrace_decr_pc_after_break): Delete.
4140 (record_btrace_stopped_by_sw_breakpoint)
4141 (record_btrace_supports_stopped_by_sw_breakpoint)
4142 (record_btrace_stopped_by_hw_breakpoint)
4143 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
4144 (init_record_btrace_ops): Install them.
4145 * record-full.c (record_full_hw_watchpoint): Delete and replace
4147 (record_full_stop_reason): ... this throughout.
4148 (record_full_exec_insn): Adjust.
4149 (record_full_wait_1): Adjust. No longer re-increment the PC.
4150 (record_full_wait_1): Adjust. Use
4151 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
4152 (record_full_stopped_by_watchpoint): Adjust.
4153 (record_full_stopped_by_sw_breakpoint)
4154 (record_full_supports_stopped_by_sw_breakpoint)
4155 (record_full_supports_stopped_by_sw_breakpoint)
4156 (record_full_stopped_by_hw_breakpoint)
4157 (record_full_supports_stopped_by_hw_breakpoint): New functions.
4158 (init_record_full_ops, init_record_full_core_ops): Install them.
4159 * record.c (record_check_stopped_by_breakpoint): New function.
4160 * record.h: Include target/waitstatus.h.
4161 (record_check_stopped_by_breakpoint): New declaration.
4163 2015-03-04 Pedro Alves <palves@redhat.com>
4165 enum lwp_stop_reason -> enum target_stop_reason
4166 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
4167 (linux_nat_stopped_by_watchpoint, status_callback)
4168 (linux_nat_wait_1): Adjust.
4169 * linux-nat.h (enum lwp_stop_reason): Delete.
4170 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
4171 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
4172 * target/waitstatus.h (enum target_stop_reason): New.
4174 2015-03-04 Pedro Alves <palves@redhat.com>
4176 * breakpoint.c (need_moribund_for_location_type): New function.
4177 (bpstat_stop_status): Don't skipping checking moribund locations
4178 of breakpoint types which the target tell caused a stop.
4179 (program_breakpoint_here_p): New function, factored out from ...
4180 (bp_loc_is_permanent): ... this.
4181 (update_global_location_list): Don't create a moribund location if
4182 the target supports reporting stops of the type of the removed
4184 * breakpoint.h (program_breakpoint_here_p): New declaration.
4185 * infrun.c (adjust_pc_after_break): Return early if the target has
4186 already adjusted the PC. Add comments.
4187 (handle_signal_stop): If nothing explains a signal, and the target
4188 tells us the stop was caused by a software breakpoint, check if
4189 there's a breakpoint instruction in the memory. If so, adjust the
4190 PC before presenting the stop to the user. Otherwise, ignore the
4191 trap. If nothing explains a signal, and the target tells us the
4192 stop was caused by a hardware breakpoint, ignore the trap.
4193 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
4194 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
4195 to_supports_stopped_by_hw_breakpoint>: New fields.
4196 (target_stopped_by_sw_breakpoint)
4197 (target_supports_stopped_by_sw_breakpoint)
4198 (target_stopped_by_hw_breakpoint)
4199 (target_supports_stopped_by_hw_breakpoint): Define.
4200 * target-delegates.c: Regenerate.
4202 2015-03-04 Pedro Alves <palves@redhat.com>
4204 * infrun.c (follow_fork_inferior): Use the whole of the
4205 inferior_ptid and pending_follow.related_pid ptids instead of
4206 building ptids from the process components. Adjust verbose output
4207 to use target_pid_to_str.
4208 * linux-nat.c (linux_child_follow_fork): Use the whole of the
4209 inferior_ptid and pending_follow.related_pid ptids instead of
4210 building ptids from the process components.
4212 2015-03-04 Mark Kettenis <kettenis@gnu.org>
4214 * inf-ptrace.c [PT_GET_PROCESS_STATE]
4215 (inf_ptrace_insert_fork_catchpoint): New function.
4216 (inf_ptrace_remove_fork_catchpoint): New function.
4217 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
4219 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4221 * s390-linux-tdep.c (s390_register_name): Return empty string
4222 instead of NULL for registers that shouldn't be visible.
4224 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4226 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
4227 XML file for 64-bit targets.
4229 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
4231 * target.h (find_default_create_inferior): Remove declaration.
4232 (find_default_attach): Likewise.
4234 2015-03-03 Pedro Alves <palves@redhat.com>
4236 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
4237 Use ptid_get_pid to get the overall process id when resuming all
4240 2015-03-03 Pedro Alves <palves@redhat.com>
4242 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
4243 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
4244 * inf-ptrace.c (get_ptrace_pid): New function.
4245 (inf_ptrace_resume): Use it.
4246 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
4249 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4251 * nat/linux-btrace.c: Include sys/utsname.h.
4252 (linux_determine_kernel_ptr_bits): New.
4253 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
4254 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
4257 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4259 * btrace.c (ftrace_update_function): Treat return as tailcall for
4260 "_dl_runtime_resolve".
4262 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4264 * btrace.h (btrace_function) <lbegin, lend>: Remove.
4265 * btrace.c (ftrace_debug): Do not print the line range.
4266 (ftrace_skip_file, ftrace_update_lines): Remove.
4267 (ftrace_new_function): Remove lbegin and lend initialization.
4268 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
4269 * record-btrace.c (btrace_compute_src_line_range): New.
4270 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
4272 2015-03-02 Pedro Alves <palves@redhat.com>
4274 * infrun.c (follow_exec): Delete all threads of the process except
4275 the event thread. Extended comments.
4277 2015-03-02 Joel Brobecker <brobecker@adacore.com>
4279 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
4281 2015-03-02 Joel Brobecker <brobecker@adacore.com>
4283 * utils.h: Remove <stdbool.h> #include.
4284 (producer_is_gcc): Change return type to "int".
4285 * utils.c (producer_is_gcc): Change return type to int.
4286 Return 1 instead of true, and 0 instead of false.
4287 Adjust function documentation accordingly.
4289 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
4291 * s390-linux-nat.c (have_regset_vxrs): New static variable.
4292 (s390_linux_fetch_inferior_registers): Handle vector registers, if
4294 (s390_linux_store_inferior_registers): Likewise.
4295 (s390_get_hwcap): Remove function. Embed its logic...
4296 (s390_read_description): ...here. Yield a target description with
4297 vector registers if applicable.
4298 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
4299 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
4300 "features/s390x-tevx-linux64.c".
4301 (struct gdbarch_tdep) <v0_full_regnum>: New field.
4302 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
4303 for "GNU/Linux-specific registers".
4304 (s390_dwarf_reg_r0l): New enum value.
4305 (s390_dwarf_reg_to_regnum): Support vector registers.
4306 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
4307 of GPR lower halves.
4308 (regnum_is_vxr_full): New function.
4309 (s390_register_name): New function.
4310 (s390_pseudo_register_name): Handle v0-v15, which are composed of
4311 f0-f15 and v0l-v15l.
4312 (s390_pseudo_register_type): Likewise.
4313 (s390_pseudo_register_read): Likewise.
4314 (s390_pseudo_register_write): Likewise.
4315 (s390_value_from_register): Account for the fact that values are
4316 placed left-justified in vector registers.
4317 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
4318 the vector reggroup and omit them from the general reggroup.
4319 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
4320 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
4321 (s390_iterate_over_regset_sections): Add iterations for the two
4323 (s390_core_read_description): Yield a target description with
4324 vector registers if applicable.
4325 (s390_gdbarch_init): Handle target descriptions with vector
4326 registers. Add "register_name" gdbarch method.
4327 (_initialize_s390_tdep): Call new tdesc initialization functions.
4328 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
4329 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
4330 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
4331 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
4332 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
4333 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
4334 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
4335 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
4336 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
4337 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
4338 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
4339 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
4340 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
4341 (S390_NUM_REGS): Adjust value.
4342 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
4343 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
4344 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
4345 * NEWS: Announce S/390 vector register support.
4347 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
4349 * features/s390-tevx-linux64.xml: New file.
4350 * features/s390-vx-linux64.xml: New file.
4351 * features/s390-vx.xml: New file.
4352 * features/s390x-tevx-linux64.xml: New file.
4353 * features/s390x-vx-linux64.xml: New file.
4354 * features/Makefile (WHICH): Add s390-vx-linux64,
4355 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
4356 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
4357 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
4359 * features/s390-tevx-linux64.c: New generated file.
4360 * features/s390-vx-linux64.c: Likewise.
4361 * features/s390x-tevx-linux64.c: Likewise.
4362 * features/s390x-vx-linux64.c: Likewise.
4363 * regformats/s390-tevx-linux64.dat: Likewise.
4364 * regformats/s390-vx-linux64.dat: Likewise.
4365 * regformats/s390x-tevx-linux64.dat: Likewise.
4366 * regformats/s390x-vx-linux64.dat: Likewise.
4368 2015-02-28 Doug Evans <xdje42@gmail.com>
4370 * symtab.h (struct symtab) <next>: Fix comment.
4372 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
4374 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
4377 2015-02-27 Pedro Alves <palves@redhat.com>
4379 * dtrace-probe.c (dtrace_probe_ops): Make extern.
4381 2015-02-27 Pedro Alves <palves@redhat.com>
4383 * common/common-exceptions.h (exception_none): Declare.
4384 * common/common-exceptions.c (exception_none): Moved from
4386 (exceptions_state_mc_init): Use exception_none.
4387 * exceptions.c (exception_none): Move to
4388 common/common-exceptions.c.
4389 * exceptions.h (exception_none): Move to
4390 common/common-exceptions.h.
4392 2015-02-27 Pedro Alves <palves@redhat.com>
4394 * main.c (catch_command_errors, catch_command_errors_const):
4395 Remove 'mask' argument. Adjust.
4396 (captured_main): Adjust callers.
4398 2015-02-27 Pedro Alves <palves@redhat.com>
4400 * python/python-internal.h: Include "extension-priv.h".
4402 2015-02-27 Pedro Alves <palves@redhat.com>
4404 * breakpoint.h (enum print_stop_action): Move further up in the
4407 2015-02-27 Pedro Alves <palves@redhat.com>
4409 * gdbarch.sh: Include regcache.h.
4410 * gdbarch.h: Regenerate.
4412 2015-02-27 Pedro Alves <palves@redhat.com>
4414 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
4415 Remove duplicate const.
4416 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
4419 2015-02-27 Pedro Alves <palves@redhat.com>
4421 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
4422 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
4423 * features/feature_to_c.sh: Tag the generated xml_builtin array
4424 with extern const in C++ mode.
4426 2015-02-27 Tom Tromey <tromey@redhat.com>
4428 * minidebug.c (struct lzma_stream): Rename to ...
4429 (struct gdb_lzma_stream): ... this.
4430 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
4432 2015-02-27 Pedro Alves <palves@redhat.com>
4434 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
4436 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
4437 (mi_cmd_stack_list_variables): Use it.
4439 2015-02-27 Pedro Alves <palves@redhat.com>
4441 * x86-linux-nat.c (u_debugreg_offset): New function.
4442 (x86_linux_dr_get, x86_linux_dr_set): Use it.
4444 2015-02-27 Pedro Alves <palves@redhat.com>
4446 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
4448 Include break-common.h.
4450 2015-02-27 Tom Tromey <tromey@redhat.com>
4451 Pedro Alves <palves@redhat.com>
4453 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
4454 local used to iterate over enums.
4455 * completer.c (signal_completer): Likewise.
4456 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
4457 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
4458 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
4459 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
4460 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
4461 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
4462 * tui-wingeneral.c (tui_refresh_all): Likewise.
4464 2015-02-27 Pedro Alves <palves@redhat.com>
4466 * target.h: Include "infrun.h".
4468 2015-02-27 Pedro Alves <palves@redhat.com>
4470 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
4472 2015-02-27 Pedro Alves <palves@redhat.com>
4474 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
4476 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
4478 2015-02-27 Pedro Alves <palves@redhat.com>
4480 * cli-out.c (_rl_erase_entire_line): Move declaration out of
4481 cli_mld_erase_entire_line, and make it extern "C".
4482 * common/common-defs.h (EXTERN_C): New.
4483 * completer.c (_rl_completion_prefix_display_length)
4484 (_rl_print_completions_horizontally, QSFUNC): Move declarations
4485 out of gdb_display_match_list_1.
4486 (_rl_qsort_string_compare): Move declaration out of
4487 gdb_display_match_list_1, and make it extern "C".
4488 * defs.h (re_comp): Use EXTERN_C.
4489 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
4490 and make it extern "C".
4491 (monstartup): Move declaration out of maintenance_set_profile_cmd,
4492 and make it extern "C".
4493 (main): Move declaration out of maintenance_set_profile_cmd.
4494 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
4497 2015-02-27 Pedro Alves <palves@redhat.com>
4499 * python/python.c (GdbMethods): Rename to ...
4500 (python_GdbMethods): ... this and make extern.
4501 (GdbModuleDef): Rename to ...
4502 (python_GdbModuleDef): ... this and make extern.
4504 2015-02-27 Pedro Alves <palves@redhat.com>
4506 * record-btrace.c (set_record_btrace_cmdlist)
4507 (show_record_btrace_cmdlist): Remove redefinitions.
4509 2015-02-27 Tom Tromey <tromey@redhat.com>
4510 Pedro Alves <palves@redhat.com>
4512 * dwarf2-frame.c (enum cfa_how_kind, struct
4513 dwarf2_frame_state_reg_info): Move out of struct
4515 * dwarf2read.c (struct tu_stats): Move out of struct
4517 (struct file_entry): Move out of struct line_header.
4518 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
4519 typedef_field_list): Move out of struct field_info.
4520 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
4521 Move out of struct dynamic_prop.
4522 (union type_owner, union field_location, struct field, struct
4523 range_bounds, union type_specific): Move out of struct main_type.
4524 (struct fn_fieldlist, struct fn_field, struct typedef_field)
4525 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
4526 (struct call_site_target, union call_site_parameter_u, struct
4527 call_site_parameter): Move out of struct call_site.
4528 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
4530 (enum srcdest_kind): Move out of struct srcdest.
4531 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
4532 * prologue-value.h (enum prologue_value_kind): Move out of struct
4534 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
4536 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
4537 out of struct field_info.
4538 * symfile.h (struct other_sections): Move out of struct
4540 * symtab.c (struct symbol_cache_slot): Move out struct
4542 * target-descriptions.c (enum tdesc_type_kind): Move out of
4543 typedef struct tdesc_type.
4544 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
4545 struct tui_line_or_address.
4546 * value.c (enum internalvar_kind, union internalvar_data): Move
4547 out of struct internalvar.
4548 * xtensa-tdep.h (struct ctype_cache): Move out of struct
4551 2015-02-27 Tom Tromey <tromey@redhat.com>
4552 Pedro Alves <palves@redhat.com>
4554 Rename symbols whose names are reserved C++ keywords throughout.
4556 2015-02-27 Pedro Alves <palves@redhat.com>
4558 * Makefile.in (COMPILER): New, get it from autoconf.
4559 (COMPILE.pre, CC_LD): Use COMPILER.
4560 (CXX): Get from autoconf instead.
4561 (CXX_FOR_TARGET): Default to g++ instead of gcc.
4562 * acinclude.m4: Include build-with-cxx.m4.
4563 * build-with-cxx.m4: New file.
4564 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
4565 Disable -Werror by default if building in C++ mode.
4566 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
4567 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
4568 Run supported-warning-flags tests with the C++ compiler.
4569 Save/restore CXXFLAGS too.
4570 * configure: Regenerate.
4572 2015-02-27 Pedro Alves <palves@redhat.com>
4574 * libiberty.m4: New file.
4575 * acinclude.m4: Include libiberty.m4.
4576 * configure.ac: Call libiberty_INIT.
4577 * config.in, configure: Regenerate.
4579 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
4581 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
4582 31-bit targets, but 64-bit targets as well.
4583 (s390_gnu_triplet_regexp): New function.
4584 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
4585 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
4588 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
4590 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
4591 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
4592 from CONTEXT_DEBUGGER.
4594 2015-02-26 Doug Evans <dje@google.com>
4596 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
4598 (set_type_vptr_fieldno): Ditto.
4599 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
4600 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
4602 2015-02-26 Pedro Alves <palves@redhat.com>
4604 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
4605 * complaints.c (vcomplaint): Pass argument FMT directly to
4606 printf-like functions instead of complaint->fmt.
4607 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
4608 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
4609 * compile/compile-loc2c.c (pushf, unary, binary): Add
4611 (do_compile_dwarf_expr_to_c): Pass string literal as format string
4613 (BINARY): Pass string literal as format string to 'binary'.
4614 * compile/compile-object-load.c (link_callbacks_einfo): Add
4616 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
4618 2015-02-26 Pedro Alves <palves@redhat.com>
4620 * windows-termcap.c: Rename to ...
4621 * stub-termcap.c: ... this. Adjust header line.
4622 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
4624 * configure: Regenerate.
4625 * configure.ac: Refer to stub-termcap.o instead of
4627 * gdb_curses.h: Mention stub-termcap.c instead of
4630 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
4632 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
4633 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
4635 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
4637 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
4639 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
4641 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
4642 bfd_canonicalize_symtab.
4644 2015-02-25 John Baldwin <jhb@FreeBSD.org>
4646 * amd64fbsd-nat.c: Include sys/user.h.
4647 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
4648 instead of KERN_PS_STRINGS to locate the signal trampoline.
4649 * i386fbsd-nat.c: Include sys/user.h.
4650 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
4651 instead of KERN_PS_STRINGS to locate the signal trampoline.
4652 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
4653 (amd64fbsd_sigtramp_p): New.
4654 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
4655 longer set default values.
4656 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
4657 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
4658 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
4659 (i386fbsd_freebsd4_sigtramp_start)
4660 (i386fbsd_freebsd4_sigtramp_middle)
4661 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
4662 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
4663 (i386fbsd_sigtramp_p): New.
4664 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
4665 longer set default values.
4666 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
4668 2015-02-25 John Baldwin <jhb@freebsd.org>
4670 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
4671 get_frame_register instead of frame_unwind_register_unsigned.
4673 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
4676 * compile/compile-c-support.c (c_compute_program): Change // comment.
4677 * compile/compile-object-load.c (setup_sections): Change // comment.
4679 2015-02-26 Joel Brobecker <brobecker@adacore.com>
4682 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
4684 2015-02-23 Pedro Alves <palves@redhat.com>
4686 * remote.c (skip_to_semicolon): New function.
4687 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
4688 special case the stop reasons that look like hex numbers
4689 upfront. Instead handle real register numbers after matching
4690 all the known stop reasons.
4692 2015-02-21 Doug Evans <dje@google.com>
4694 PR c++/17976, symtab/17821
4695 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
4696 is_in_anonymous. All callers updated.
4697 (find_symbol_in_baseclass): Ditto.
4698 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
4699 for symbols in an anonymous namespace.
4700 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
4701 DW_AT_name directly.
4702 (dwarf2_name): Convert missing namespace name to
4703 CP_ANONYMOUS_NAMESPACE_STR.
4705 2015-02-20 Pedro Alves <palves@redhat.com>
4707 * linux-nat.c (linux_handle_extended_wait): Call
4708 thread_db_notice_clone whenever a new clone LWP is detected.
4709 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
4711 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
4712 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
4713 (linux_unstop_all_lwps): Declare.
4714 * linux-thread-db.c (struct thread_get_info_inout): Delete.
4715 (thread_get_info_callback): Delete.
4716 (thread_from_lwp): Use td_thr_get_info and record_thread.
4717 (thread_db_attach_lwp): Delete.
4718 (thread_db_notice_clone): New function.
4719 (try_thread_db_load_1): If /proc is mounted and shows the
4720 process'es task list, walk over all LWPs and call thread_from_lwp
4721 instead of relying on td_ta_thr_iter.
4722 (attach_thread): Don't call check_thread_signals here. Split the
4723 tail part of the function (which adds the thread to the core GDB
4725 (record_thread): ... this function. Call check_thread_signals
4727 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
4728 call thread_from_lwp.
4729 (thread_db_update_thread_list): Rename to ...
4730 (thread_db_update_thread_list_org): ... this.
4731 (thread_db_update_thread_list): New function.
4732 (thread_db_find_thread_from_tid): Delete.
4733 (thread_db_get_ada_task_ptid): Simplify.
4734 * nat/linux-procfs.c: Include <sys/stat.h>.
4735 (linux_proc_task_list_dir_exists): New function.
4736 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
4738 2015-02-20 Pedro Alves <palves@redhat.com>
4740 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
4741 main LWP. Handle the case of waitpid returning 0 if we're already
4742 attached to the LWP. Don't set the LWP's last_resume_kind to
4743 resume_stop if we already knew about the LWP.
4744 (linux_nat_filter_event): Add debug logs.
4746 2015-02-20 Pedro Alves <palves@redhat.com>
4748 * target.h (forward_target_decr_pc_after_break): Delete
4751 2015-02-20 Pedro Alves <palves@redhat.com>
4754 * linux-thread-db.c (thread_get_info_callback): Return early if
4755 the thread's lwp id is -1.
4757 2015-02-20 Joel Brobecker <brobecker@adacore.com>
4761 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
4763 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
4764 (dtrace_get_probes) Change type of variable 'dof'.
4766 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
4768 PR breakpoints/16812
4769 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
4770 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
4771 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
4773 2015-02-19 David Taylor <dtaylor@emc.com>
4775 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
4777 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
4779 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
4781 (tui_putc): Don't call tui_handle_resize_during_io.
4782 (tui_getc): Likewise.
4783 (tui_mld_getc): Likewise.
4784 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
4785 (tui_sigwinch_token): New static variable.
4786 (tui_initialize_win): Adjust documentation. Set
4788 (tui_async_resize_screen): New asynchronous callback.
4789 (tui_sigwinch_handler): Adjust documentation. Asynchronously
4790 invoke tui_async_resize_screen.
4792 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
4794 * configure: Regenerated.
4795 * configure.ac: Use GDB_AC_TRANSFORM.
4796 * Makefile.in (aclocal_m4_deps): Added transform.m4.
4797 * acinclude.m4: sinclude transform.m4.
4798 * transform.m4: New file.
4799 (GDB_AC_TRANSFORM): New macro.
4801 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4803 * NEWS: Announce the support for DTrace SDT probes.
4805 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4807 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
4808 (amd64_dtrace_parse_probe_argument): New function.
4809 (amd64_dtrace_probe_is_enabled): Likewise.
4810 (amd64_dtrace_enable_probe): Likewise.
4811 (amd64_dtrace_disable_probe): Likewise.
4812 (amd64_linux_init_abi): Register the
4813 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
4814 `gdbarch_dtrace_disable_probe' and
4815 `gdbarch_dtrace_probe_is_enabled' hooks.
4816 (amd64_dtrace_disabled_probe_sequence_1): New constant.
4817 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
4818 (amd64_dtrace_enable_probe_sequence): Likewise.
4819 (amd64_dtrace_disable_probe_sequence): Likewise.
4821 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4823 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
4824 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
4825 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
4827 * Makefile.in (SFILES): dtrace-probe.c added.
4828 * configure: Regenerate.
4829 * dtrace-probe.c: New file.
4830 (SHT_SUNW_dof): New constant.
4831 (dtrace_probe_type): New enum.
4832 (dtrace_probe_arg): New struct.
4833 (dtrace_probe_arg_s): New typedef.
4834 (struct dtrace_probe_enabler): New struct.
4835 (dtrace_probe_enabler_s): New typedef.
4836 (dtrace_probe): New struct.
4837 (dtrace_probe_is_linespec): New function.
4838 (dtrace_dof_sect_type): New enum.
4839 (dtrace_dof_dofh_ident): Likewise.
4840 (dtrace_dof_encoding): Likewise.
4841 (DTRACE_DOF_ENCODE_LSB): Likewise.
4842 (DTRACE_DOF_ENCODE_MSB): Likewise.
4843 (dtrace_dof_hdr): New struct.
4844 (dtrace_dof_sect): Likewise.
4845 (dtrace_dof_provider): Likewise.
4846 (dtrace_dof_probe): Likewise.
4847 (DOF_UINT): New macro.
4848 (DTRACE_DOF_PTR): Likewise.
4849 (DTRACE_DOF_SECT): Likewise.
4850 (dtrace_process_dof_probe): New function.
4851 (dtrace_process_dof): Likewise.
4852 (dtrace_build_arg_exprs): Likewise.
4853 (dtrace_get_arg): Likewise.
4854 (dtrace_get_probes): Likewise.
4855 (dtrace_get_probe_argument_count): Likewise.
4856 (dtrace_can_evaluate_probe_arguments): Likewise.
4857 (dtrace_evaluate_probe_argument): Likewise.
4858 (dtrace_compile_to_ax): Likewise.
4859 (dtrace_probe_destroy): Likewise.
4860 (dtrace_gen_info_probes_table_header): Likewise.
4861 (dtrace_gen_info_probes_table_values): Likewise.
4862 (dtrace_probe_is_enabled): Likewise.
4863 (dtrace_probe_ops): New variable.
4864 (info_probes_dtrace_command): New function.
4865 (_initialize_dtrace_probe): Likewise.
4866 (dtrace_type_name): Likewise.
4868 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4870 * gdbarch.sh (dtrace_parse_probe_argument): New.
4871 (dtrace_probe_is_enabled): Likewise.
4872 (dtrace_enable_probe): Likewise.
4873 (dtrace_disable_probe): Likewise.
4874 * gdbarch.c: Regenerate.
4875 * gdbarch.h: Regenerate.
4877 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4879 * stap-probe.c (stap_probe_ops): Add NULLs in the static
4880 stap_probe_ops for `enable_probe' and `disable_probe'.
4881 * probe.c (enable_probes_command): New function.
4882 (disable_probes_command): Likewise.
4883 (_initialize_probe): Define the cli commands `enable probe' and
4885 (parse_probe_linespec): New function.
4886 (info_probes_for_ops): Use parse_probe_linespec.
4887 * probe.h (probe_ops): New hooks `enable_probe' and
4890 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4892 * probe.c (compute_probe_arg): Moved from stap-probe.c
4893 (compile_probe_arg): Likewise.
4894 (probe_funcs): Likewise.
4895 * stap-probe.c (compute_probe_arg): Moved to probe.c.
4896 (compile_probe_arg): Likewise.
4897 (probe_funcs): Likewise.
4899 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4901 * probe.c (print_ui_out_not_applicables): New function.
4902 (exists_probe_with_pops): Likewise.
4903 (info_probes_for_ops): Do not include column headers for probe
4904 types for which no probe has been actually found on any object.
4905 Also invoke `print_ui_out_not_applicables' in order to match the
4906 column rows with the header when probes of several types are
4908 Print the "Type" column.
4909 * probe.h (probe_ops): Added a new probe operation `type_name'.
4910 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
4911 (stap_type_name): New function.
4913 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
4915 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
4916 (key_is_command_char): Delete.
4918 2015-02-17 Pedro Alves <palves@redhat.com>
4920 * tui/tui.c (tui_enable): Resize windows before anything
4921 might show a window.
4923 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
4926 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
4927 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
4929 * aarch64-tdep.h (tdesc_aarch64): Declare.
4931 2015-02-12 Mark Wielaard <mjw@redhat.com>
4933 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
4935 2015-02-13 Doug Evans <dje@google.com>
4937 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
4938 anonymous_namespace to is_in_anonymous for consistency with the rest
4940 (cp_lookup_bare_symbol): Fix typo in comment.
4941 (cp_search_static_and_baseclasses): Ditto.
4942 (search_symbol_list): Use vertical space in comment better.
4943 (reset_directive_searched): Ditto. Fix typo.
4944 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
4946 2015-02-13 Yao Qi <yao.qi@arm.com>
4948 * MAINTAINERS: Update my email address.
4950 2015-02-12 Doug Evans <dje@google.com>
4952 * symtab.c (completion_list_add_name): Fix memory leak.
4954 2015-02-12 Doug Evans <dje@google.com>
4956 * completer.c (complete_line): Remove incorrect comment.
4958 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4960 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
4961 (py_print_frame): Use RETURN_MASK_ERROR.
4963 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4965 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
4966 function comment. Wrap all function that can throw in cleanups.
4967 (gdbpy_apply_frame_filter): Wrap all function that can throw in
4970 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4972 * python/py-framefilter.c (py_print_frame): Substitute goto error.
4973 Remove the error label.
4975 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4977 * python/py-framefilter.c (py_print_frame): Put conditional code paths
4978 with goto first, indent the former else codepath left. Put variable
4979 'elided' to a new inner block.
4981 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4983 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
4985 2015-02-11 Pedro Alves <palves@redhat.com>
4987 * xcoffread.c (within_function): Delete.
4989 2015-02-11 Tom Tromey <tromey@redhat.com>
4990 Pedro Alves <palves@redhat.com>
4992 * breakpoint.c (base_breakpoint_ops): Delete.
4993 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
4994 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
4995 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
4996 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
4997 * python/py-arch.c (arch_object_type): Make extern.
4998 * python/py-block.c (block_syms_iterator_object_type): Make extern.
4999 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
5000 * python/py-cmd.c (cmdpy_object_type): Make extern.
5001 * python/py-continueevent.c (continue_event_object_type)
5002 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
5003 parameter. Update all callers.
5004 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
5005 * python/py-exitedevent.c (exited_event_object_type): Make extern.
5006 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
5007 * python/py-function.c (fnpy_object_type): Make extern.
5008 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
5009 * python/py-infevents.c (call_pre_event_object_type)
5010 (inferior_call_post_event_object_type).
5011 (memory_changed_event_object_type): Make extern.
5012 * python/py-infthread.c (thread_object_type): Make extern.
5013 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
5014 * python/py-linetable.c (linetable_entry_object_type)
5015 (linetable_object_type, ltpy_iterator_object_type): Make extern.
5016 * python/py-newobjfileevent.c (new_objfile_event_object_type)
5017 (clear_objfiles_event_object_type): Make extern.
5018 * python/py-objfile.c (objfile_object_type): Make extern.
5019 * python/py-param.c (parmpy_object_type): Make extern.
5020 * python/py-progspace.c (pspace_object_type): Make extern.
5021 * python/py-signalevent.c (signal_event_object_type): Make extern.
5022 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
5023 * python/py-type.c (type_object_type, field_object_type)
5024 (type_iterator_object_type): Make extern.
5025 * python/python.c (python_extension_script_ops)
5026 (python_extension_ops): Make extern.
5027 * stap-probe.c (stap_probe_ops): Make extern.
5029 2015-02-11 Pedro Alves <pedro@codesourcery.com>
5031 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
5032 because the event thread is not the current thread.
5034 2015-02-11 Doug Evans <xdje42@gmail.com>
5036 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
5037 been initialized yet, return NULL.
5039 2015-02-11 Doug Evans <dje@google.com>
5041 * symfile.h (new_symfile_objfile): Delete.
5042 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
5043 All callers updated.
5045 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
5047 * tui/tui-io.c (tui_handle_resize_during_io): Call
5048 tui_update_gdb_sizes() after resizing the screen.
5049 * tui/tui.c (tui_enable): Resize the terminal before
5050 calling tui_update_gdb_sizes().
5052 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
5054 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
5055 line before printing a newline.
5057 2015-02-11 Mark Wielaard <mjw@redhat.com>
5059 * utils.c (producer_is_gcc): Return true or false.
5061 2015-02-10 Mark Wielaard <mjw@redhat.com>
5063 * utils.h (producer_is_gcc): Change return type to bool. Add major
5065 * utils.c (producer_is_gcc): Likewise.
5066 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
5067 * dwarf2read.c (check_producer): Likewise.
5069 2015-02-10 Pedro Alves <palves@redhat.com>
5071 * infrun.c (displaced_step_fixup): Switch to the event thread
5072 before calling gdbarch_displaced_step_fixup.
5074 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
5076 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
5078 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
5080 * ada-varobj.c (ada_name_of_child): Constify parent.
5081 (ada_path_expr_of_child): Same.
5082 (ada_value_of_child): Same.
5083 (ada_type_of_child): Same.
5084 * c-varobj.c (c_is_path_expr_parent): Same.
5085 (c_describe_child): Same.
5086 (c_name_of_child): Same.
5087 (c_value_of_child): Same.
5088 (c_type_of_child): Same.
5089 (cplus_number_of_children): Same.
5090 (cplus_describe_child): Constify var.
5091 (cplus_name_of_child): Constify parent.
5092 (cplus_value_of_child): Same.
5093 (cplus_type_of_child): Same.
5094 * jv-varobj.c (java_name_of_child): Same.
5095 (java_value_of_child): Same.
5096 (java_type_of_child): Same.
5097 * varobj.c (value_of_child): Same.
5098 (varobj_default_is_path_expr_parent): Constify var, parent and return
5100 (varobj_get_path_expr): Constify var, modify path_expr through
5102 (install_new_value): Constify parent.
5103 (value_of_child): Constify parent.
5104 * varobj.h (struct varobj): Constify parent.
5105 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
5107 (varobj_get_path_expr): Constify var.
5108 (varobj_get_path_expr_parent): Constify var and return value.
5110 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
5112 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
5113 (arm_prologue_this_id): Move PC and SP limit checks to
5114 arm_prologue_unwind_stop_reason.
5115 (arm_prologue_unwind) <stop_reason> : Set to
5116 arm_prologue_unwind_stop_reason.
5118 2015-02-09 Mark Wielaard <mjw@redhat.com>
5120 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
5121 DW_LANG_Fortran08 as language_fortran.
5123 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
5126 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
5127 of pointer against char.
5129 2015-02-09 Mark Wielaard <mjw@redhat.com>
5131 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
5132 (c_type_print_modifier): Likewise.
5133 * dwarf2read.c (read_tag_atomic_type): New function.
5134 (read_type_die_1): Handle DW_TAG_atomic_type.
5135 * gdbtypes.c (make_atomic_type): New function.
5136 (recursive_dump_type): Handle TYPE_ATOMIC.
5137 * gdbtypes.h (enum type_flag_values): Renumber.
5138 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
5139 (TYPE_ATOMIC): New macro.
5140 (make_atomic_type): Declare.
5142 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5144 * btrace.c (ftrace_find_call): Skip gaps.
5145 (ftrace_new_function): Initialize level.
5146 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
5147 (ftrace_new_switch): Update
5149 (ftrace_new_gap): New.
5150 (ftrace_update_function): Create new function after gap.
5151 (btrace_compute_ftrace_bts): Create gap on error.
5152 (btrace_stitch_bts): Update parameters. Clear trace if it
5154 (btrace_stitch_trace): Update parameters. Update callers.
5155 (btrace_clear): Reset the number of gaps.
5156 (btrace_insn_get): Return NULL if the iterator points to a gap.
5157 (btrace_insn_number): Return zero if the iterator points to a gap.
5158 (btrace_insn_end): Allow gaps at the end.
5159 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
5160 (btrace_find_insn_by_number): Assert that the found iterator does
5162 (btrace_call_next, btrace_call_prev): Assert that the last function
5164 * btrace.h (btrace_bts_error): New.
5165 (btrace_function): Update comment.
5166 (btrace_function) <insn, insn_offset, number>: Update comment.
5167 (btrace_function) <errcode>: New.
5168 (btrace_thread_info) <ngaps>: New.
5169 (btrace_thread_info) <replay>: Update comment.
5170 (btrace_insn_get): Update comment.
5171 * record-btrace.c (btrace_ui_out_decode_error): New.
5172 (record_btrace_info): Print number of gaps.
5173 (btrace_insn_history, btrace_call_history): Call
5174 btrace_ui_out_decode_error for gaps.
5175 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
5177 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5179 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
5180 * nat/linux-btrace.c: (btrace_this_cpu): New.
5181 (cpu_supports_bts): Call btrace_this_cpu.
5182 (intel_supports_bts): Add cpu parameter.
5184 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5186 * btrace.h (btrace_insn_class): New.
5187 (btrace_insn) <size, iclass>: New.
5188 * btrace.c (ftrace_find_call): Update parameters. Update users.
5189 Use instruction classification.
5190 (ftrace_new_return): Update parameters. Update users.
5191 (ftrace_update_function): Update parameters. Update users. Use
5192 instruction classification.
5193 (ftrace_update_insns): Update parameters. Update users.
5194 (ftrace_classify_insn): New.
5195 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
5196 TRY_CATCH around call to gdb_insn_length.
5198 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5200 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
5201 Update parameters. Update users.
5203 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5205 * btrace.c (parse_xml_btrace_conf_bts): Add size.
5206 (btrace_conf_bts_attributes): New.
5207 (btrace_conf_children): Add attributes.
5208 * common/btrace-common.h (btrace_config_bts): New.
5209 (btrace_config)<bts>: New.
5210 (btrace_config): Update comment.
5211 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
5213 * features/btrace-conf.dtd: Increment version. Add size
5214 attribute to bts element.
5215 * record-btrace.c (set_record_btrace_bts_cmdlist,
5216 show_record_btrace_bts_cmdlist): New.
5217 (record_btrace_adjust_size, record_btrace_print_bts_conf,
5218 record_btrace_print_conf, cmd_set_record_btrace_bts,
5219 cmd_show_record_btrace_bts): New.
5220 (record_btrace_info): Call record_btrace_print_conf.
5221 (_initialize_record_btrace): Add commands.
5222 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
5223 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
5224 (btrace_sync_conf): Synchronize bts size.
5225 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
5226 * NEWS: Announce new commands and new packets.
5228 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5230 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
5231 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
5232 (x86_linux_btrace_conf): New.
5233 (x86_linux_create_target): Initialize to_btrace_conf.
5234 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
5235 Check format. Split into this and ...
5236 (linux_enable_bts): ... this.
5237 (linux_btrace_conf): New.
5238 (perf_event_skip_record): Renamed into ...
5239 (perf_event_skip_bts_record): ... this. Updated users.
5240 (linux_disable_btrace): Split into this and ...
5241 (linux_disable_bts): ... this.
5242 (linux_read_btrace): Check format.
5243 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
5244 (linux_btrace_conf): New.
5245 (btrace_target_info)<ptid>: Moved.
5246 (btrace_target_info)<conf>: New.
5247 (btrace_target_info): Split into this and ...
5248 (btrace_tinfo_bts): ... this. Updated users.
5249 * btrace.c (btrace_enable): Update parameters.
5250 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
5251 (btrace_conf_children, btrace_conf_attributes)
5252 (btrace_conf_elements): New.
5253 * btrace.h (btrace_enable): Update parameters.
5254 (btrace_conf, parse_xml_btrace_conf): New.
5255 * common/btrace-common.h (btrace_config): New.
5256 * feature/btrace-conf.dtd: New.
5257 * record-btrace.c (record_btrace_conf): New.
5258 (record_btrace_cmdlist): New.
5259 (record_btrace_enable_warn, record_btrace_open): Pass
5260 &record_btrace_conf.
5261 (record_btrace_info): Print recording format.
5262 (cmd_record_btrace_bts_start): New.
5263 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
5264 (_initialize_record_btrace): Add "record btrace bts" subcommand.
5265 Add "record bts" alias command.
5266 * remote.c (remote_state)<btrace_config>: New.
5267 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
5268 (remote_protocol_features): Add qXfer:btrace-conf:read.
5269 (remote_open_1): Call remote_btrace_reset.
5270 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
5271 (btrace_target_info)<conf>: New.
5272 (btrace_sync_conf, btrace_read_config): New.
5273 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
5275 (remote_btrace_conf): New.
5276 (init_remote_ops): Initialize to_btrace_conf.
5277 (_initialize_remote): Add qXfer:btrace-conf packet.
5278 * target.c (target_enable_btrace): Update parameters.
5279 (target_btrace_conf): New.
5280 * target.h (target_enable_btrace): Update parameters.
5281 (target_btrace_conf): New.
5282 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
5283 (target_ops)<to_enable_btrace>: Update parameters and comment.
5284 (target_ops)<to_btrace_conf>: New.
5285 * target-delegates: Regenerate.
5286 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
5287 (target_debug_print_const_struct_btrace_target_info_p): New.
5288 * NEWS: Announce new command and new packet.
5290 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5292 * nat/linux-btrace.h (perf_event_buffer): New.
5293 (btrace_target_info) <buffer, size, data_head>: Replace with ...
5295 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
5296 (perf_event_buffer_size, perf_event_buffer_begin)
5297 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
5299 (perf_event_new_data): New.
5301 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5303 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
5304 * record-btrace.c (record_btrace_open): Remove call to
5305 target_supports_btrace.
5306 * remote.c (remote_supports_btrace): Update parameters.
5307 * target.c (target_supports_btrace): Update parameters.
5308 * target.h (to_supports_btrace, target_supports_btrace): Update
5310 * target-delegates.c: Regenerate.
5311 * target-debug.h (target_debug_print_enum_btrace_format): New.
5312 * nat/linux-btrace.c
5313 (kernel_supports_btrace): Rename into ...
5314 (kernel_supports_bts): ... this. Update users. Update warning text.
5315 (intel_supports_btrace): Rename into ...
5316 (intel_supports_bts): ... this. Update users.
5317 (cpu_supports_btrace): Rename into ...
5318 (cpu_supports_bts): ... this. Update users.
5319 (linux_supports_btrace): Update parameters. Split into this and ...
5320 (linux_supports_bts): ... this.
5321 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
5323 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5325 * Makefile.in (SFILES): Add common/btrace-common.c.
5326 (COMMON_OBS): Add common/btrace-common.o.
5327 (btrace-common.o): Add build rules.
5328 * btrace.c (parse_xml_btrace): Update parameters.
5329 (parse_xml_btrace_block): Set format field.
5330 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
5331 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
5332 (btrace_compute_ftrace): Split into this and...
5333 (btrace_compute_ftrace_bts): ...this.
5334 (btrace_stitch_trace): Split into this and...
5335 (btrace_stitch_bts): ...this.
5336 * btrace.h (parse_xml_btrace): Update parameters.
5337 (make_cleanup_btrace_data): New.
5338 * common/btrace-common.c: New.
5339 * common/btrace-common.h: Include common-defs.h.
5340 (btrace_block_s): Update comment.
5341 (btrace_format): New.
5342 (btrace_format_string): New.
5343 (btrace_data_bts): New.
5345 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
5346 * remote.c (remote_read_btrace): Update parameters.
5347 * target.c (target_read_btrace): Update parameters.
5348 * target.h (target_read_btrace): Update parameters.
5349 (target_ops)<to_read_btrace>: Update parameters.
5350 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
5351 * target-delegates.c: Regenerate.
5352 * target-debug (target_debug_print_struct_btrace_data_p): New.
5353 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
5354 (linux_read_bts): ...this.
5355 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
5357 2015-02-06 Doug Evans <dje@google.com>
5359 * remote-m32r-sdi.c: Include symfile.h.
5361 2015-02-06 Doug Evans <dje@google.com>
5363 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
5364 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
5367 2015-02-06 Pedro Alves <palves@redhat.com>
5369 * linux-thread-db.c (find_new_threads_callback): Add debug output.
5371 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
5374 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
5375 (enable_count_command): Check args for NULL value.
5377 2015-02-05 Doug Evans <xdje42@gmail.com>
5379 * guile/scm-frame.c: Fix spelling errors in a comment.
5381 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
5383 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
5384 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
5387 2015-02-04 Pedro Alves <palves@redhat.com>
5389 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
5390 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
5392 (resume_stopped_resumed_lwps): Don't check whether the thread is
5393 marked as executing.
5394 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
5396 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5398 * regset.h (struct regset): Add flags field.
5399 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
5400 * corelow.c (get_core_register_section): Add warning if the size
5401 exceeds the requested size and the regset does not have the
5402 REGSET_VARIABLE_SIZE flag set.
5403 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
5405 * armbsd-tdep.c (armbsd_gregset): Likewise.
5406 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
5407 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
5408 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
5409 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
5411 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5413 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
5414 For ".reg-xstate", explicitly specify the requested section size
5415 via X86_XSTATE_SIZE instead of just 0 on input and
5416 X86_XSTATE_MAX_SIZE on output.
5417 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
5420 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5423 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
5424 function type, particularly its SIZE parameter.
5425 * gdbarch.h: Regenerate.
5426 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
5427 actual against required size using ">=" instead of "==".
5428 (amd64_collect_fpregset): Likewise.
5429 * i386-tdep.c (i386_supply_gregset): Likewise.
5430 (i386_collect_gregset): Likewise.
5431 (i386_supply_fpregset): Likewise.
5432 (i386_collect_fpregset): Likewise.
5433 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
5434 (mips_fill_gregset_wrapper): Likewise.
5435 (mips_supply_fpregset_wrapper): Likewise.
5436 (mips_fill_fpregset_wrapper): Likewise.
5437 (mips64_supply_gregset_wrapper): Likewise.
5438 (mips64_fill_gregset_wrapper): Likewise.
5439 (mips64_supply_fpregset_wrapper): Likewise.
5440 (mips64_fill_fpregset_wrapper): Likewise.
5441 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
5442 (am33_supply_fpregset_method): Likewise.
5443 (am33_collect_gregset_method): Likewise.
5444 (am33_collect_fpregset_method): Likewise.
5446 2015-02-04 Doug Evans <dje@google.com>
5447 Pedro Alves <palves@redhat.com>
5448 Eli Zaretskii <eliz@gnu.org>
5451 * tui/tui-command.c (tui_refresh_cmd_win): New function.
5452 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
5453 * tui/tui-file.c: #include tui/tui-command.h.
5454 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
5455 (tui_file_flush): Refresh command window if stream is gdb_stdout.
5456 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
5458 2015-02-04 Pedro Alves <palves@redhat.com>
5461 * event-loop.c (gdb_do_one_event): Add default switch case.
5463 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
5465 Filter out inferior gcc option -fpreprocessed.
5466 * compile/compile.c (filter_args): New function.
5469 2015-02-03 Pedro Alves <palves@redhat.com>
5471 * event-loop.c: Don't declare nor define a queue type for
5473 (event_queue): Delete.
5474 (create_event, create_file_event, gdb_event_xfree)
5475 (initialize_event_loop, process_event): Delete.
5476 (gdb_do_one_event): Return as soon as one event is handled.
5477 (handle_file_event): Change prototype. Used the passed in
5478 file_handler pointer and ready_mask instead of looping over all
5480 (gdb_wait_for_event): Update the poll/select timeouts before
5481 blocking. Run event handlers directly instead of queueing events.
5482 Return as soon as one event is handled.
5483 (struct async_event_handler_data): Delete.
5484 (invoke_async_event_handler): Delete.
5485 (check_async_event_handlers): Change return type to int. Run
5486 event handlers directly instead of queueing events. Return as
5487 soon as one event is handled.
5488 (handle_timer_event): Delete.
5489 (update_wait_timeout): New function, factored out from
5491 (poll_timers): Reimplement.
5492 * event-loop.h (initialize_event_loop): Delete declaration.
5493 * top.c (gdb_init): Don't call initialize_event_loop.
5495 2015-02-03 Pedro Alves <palves@redhat.com>
5497 * event-loop.c (clear_async_event_handler): New function.
5498 * event-loop.h (clear_async_event_handler): New declaration.
5499 * record-btrace.c (record_btrace_async): New function.
5500 (init_record_btrace_ops): Install record_btrace_async.
5501 * record-full.c (record_full_async): New function.
5502 (record_full_resume): Don't mark the async event source here.
5503 (init_record_full_ops): Install record_full_async.
5504 (record_full_core_resume): Don't mark the async event source here.
5505 (init_record_full_core_ops): Install record_full_async.
5506 * remote.c (remote_async): Mark and clear the async stop reply
5507 queue event-loop token as appropriate.
5509 2015-02-03 Pedro Alves <palves@redhat.com>
5511 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
5512 target_is_async_p instead of target_can_async.
5513 (linux_nat_wait): Use target_is_async_p instead of
5514 target_can_async. Don't enable async here.
5515 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
5516 target_is_async_p instead of target_can_async.
5518 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
5520 * varobj.h (lang_varobj_ops): Mention which return values need
5523 2015-02-02 Joel Brobecker <brobecker@adacore.com>
5525 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
5527 2015-02-02 Joel Brobecker <brobecker@adacore.com>
5530 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
5531 results found in the cache.
5533 2015-02-02 Joel Brobecker <brobecker@adacore.com>
5536 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
5537 when allocating a new one.
5539 2015-02-01 Tom Tromey <tom@tromey.com>
5541 * MAINTAINERS: Remove myself.
5543 2015-01-31 Doug Evans <xdje42@gmail.com>
5545 * dwarf2read.c (process_structure_scope): Update setting of
5546 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
5547 * gdbtypes.c (internal_type_vptr_fieldno): New function.
5548 (set_type_vptr_fieldno): New function.
5549 (internal_type_vptr_basetype): New function.
5550 (set_type_vptr_basetype): New function.
5551 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
5553 (allocate_cplus_struct_type): Initialize vptr_fieldno.
5554 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
5555 (print_cplus_stuff): ... moved here.
5556 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
5557 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
5559 (struct cplus_struct_type): ... here. All uses updated.
5560 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
5561 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
5562 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
5563 * stabsread.c (read_tilde_fields): Update setting of
5564 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
5566 2015-01-31 Doug Evans <xdje42@gmail.com>
5568 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
5570 (cp_print_class_member): Rename local domain to self_type.
5571 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
5572 domain_type to self_type.
5573 (set_die_type) <need_gnat_info>: Handle
5574 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
5575 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
5576 TYPE_SPECIFIC_SELF_TYPE.
5577 * gdbtypes.c (internal_type_self_type): New function.
5578 (set_type_self_type): New function.
5579 (smash_to_memberptr_type): Rename parameter domain to self_type.
5580 Update setting of TYPE_SELF_TYPE.
5581 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
5582 (smash_to_method_type): Rename parameter domain to self_type.
5583 Update setting of TYPE_SELF_TYPE.
5584 (check_stub_method): Call smash_to_method_type.
5585 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
5586 (copy_type_recursive): Ditto.
5587 * gdbtypes.h (enum type_specific_kind): New value
5588 TYPE_SPECIFIC_SELF_TYPE.
5589 (struct main_type) <type_specific>: New member self_type.
5590 (struct cplus_struct_type) <fn_field.type>: Update comment.
5591 (TYPE_SELF_TYPE): Rewrite.
5592 (internal_type_self_type, set_type_self_type): Declare.
5593 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
5595 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
5596 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
5598 * stabsread.c (read_member_functions): Mark methods with
5599 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
5602 2015-01-31 Doug Evans <xdje42@gmail.com>
5604 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
5607 2015-01-31 Doug Evans <xdje42@gmail.com>
5609 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
5610 or unions. Return zero if union.
5611 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
5612 (gnuv3_rtti_type): Pass already-check_typedef'd value to
5614 (compute_vtable_size): Assert only passed structs.
5615 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
5617 2015-01-31 Doug Evans <xdje42@gmail.com>
5619 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
5622 2015-01-31 Gary Benson <gbenson@redhat.com>
5623 Doug Evans <dje@google.com>
5628 * cli/cli-cmds.c (complete_command): Notify user if max-completions
5630 * common/common-exceptions.h (enum errors)
5631 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
5632 * completer.h (get_max_completions_reached_message): New declaration.
5633 (max_completions): Likewise.
5634 (completion_tracker_t): New typedef.
5635 (new_completion_tracker): New declaration.
5636 (make_cleanup_free_completion_tracker): Likewise.
5637 (maybe_add_completion_enum): New enum.
5638 (maybe_add_completion): New declaration.
5639 (throw_max_completions_reached_error): Likewise.
5640 * completer.c (max_completions): New global variable.
5641 (new_completion_tracker): New function.
5642 (free_completion_tracker): Likewise.
5643 (make_cleanup_free_completion_tracker): Likewise.
5644 (maybe_add_completions): Likewise.
5645 (throw_max_completions_reached_error): Likewise.
5646 (complete_line): Remove duplicates and limit result to max_completions
5648 (get_max_completions_reached_message): New function.
5649 (gdb_display_match_list): Handle max_completions.
5650 (_initialize_completer): New declaration and function.
5651 * symtab.c: Include completer.h.
5652 (completion_tracker): New static variable.
5653 (completion_list_add_name): Call maybe_add_completion.
5654 (default_make_symbol_completion_list_break_on_1): Renamed from
5655 default_make_symbol_completion_list_break_on. Maintain
5656 completion_tracker across calls to completion_list_add_name.
5657 (default_make_symbol_completion_list_break_on): New function.
5658 * top.c (init_main): Set rl_completion_display_matches_hook.
5659 * tui/tui-io.c: Include completer.h.
5660 (tui_old_rl_display_matches_hook): New static global.
5661 (tui_rl_display_match_list): Notify user if max-completions reached.
5662 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
5663 * NEWS (New Options): Mention set/show max-completions.
5665 2015-01-31 Gary Benson <gbenson@redhat.com>
5667 * symtab.c (struct add_name_data) <code>: New field.
5669 (add_symtab_completions): New function.
5670 (symtab_expansion_callback): Likewise.
5671 (default_make_symbol_completion_list_break_on): Set datum.code.
5672 Move minimal symbol scan before calling expand_symtabs_matching.
5673 Scan known primary symtabs for externs and statics before calling
5674 expand_symtabs_matching. Pass symtab_expansion_callback as
5675 expansion_notify argument to expand_symtabs_matching. Do not scan
5676 primary symtabs for externs and statics after calling
5677 expand_symtabs_matching.
5679 2015-01-31 Gary Benson <gbenson@redhat.com>
5681 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
5682 (struct quick_symbol_functions) <expand_symtabs_matching>:
5683 New argument expansion_notify. All uses updated.
5684 (expand_symtabs_matching): New argument expansion_notify.
5686 * symfile-debug.c (debug_qf_expand_symtabs_matching):
5687 Also print expansion notify.
5688 * symtab.c (expand_symtabs_matching_via_partial): Call
5689 expansion_notify whenever a partial symbol table is expanded.
5690 * dwarf2read.c (dw2_expand_symtabs_matching): Call
5691 expansion_notify whenever a symbol table is instantiated.
5693 2015-01-31 Doug Evans <xdje42@gmail.com>
5695 * cli-out.c: #include completer.h, readline/readline.h.
5696 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
5697 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
5698 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
5699 * cli-out.h (cli_display_match_list): Declare.
5700 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
5701 (ELLIPSIS_LEN): Ditto.
5702 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
5703 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
5704 (gdb_fnprint, gdb_print_filename): Ditto.
5705 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
5706 (gdb_display_match_list): Ditto.
5707 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
5708 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
5709 (mld_beep_ftype, mld_read_key_ftype): Ditto.
5710 (match_list_displayer): New struct.
5711 (gdb_display_match_list): Declare.
5712 * top.c (init_main): Set rl_completion_display_matches_hook.
5713 * tui/tui-io.c: #include completer.h.
5714 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
5715 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
5716 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
5717 (tui_mld_getc, tui_mld_read_key): Ditto.
5718 (tui_rl_display_match_list): Rewrite.
5719 (tui_handle_resize_during_io): New arg for_completion. All callers
5722 2015-01-31 Doug Evans <xdje42@gmail.com>
5724 Add symbol lookup cache.
5725 * NEWS: Document new options and commands.
5726 * symtab.c (symbol_cache_key): New static global.
5727 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
5728 (SYMBOL_LOOKUP_FAILED): New macro.
5729 (symbol_cache_slot_state): New enum.
5730 (block_symbol_cache): New struct.
5731 (symbol_cache): New struct.
5732 (new_symbol_cache_size, symbol_cache_size): New static globals.
5733 (hash_symbol_entry, eq_symbol_entry): New functions.
5734 (symbol_cache_byte_size, resize_symbol_cache): New functions.
5735 (make_symbol_cache, free_symbol_cache): New functions.
5736 (get_symbol_cache, symbol_cache_cleanup): New function.
5737 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
5738 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
5739 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
5740 (symbol_cache_flush, symbol_cache_dump): New functions.
5741 (maintenance_print_symbol_cache): New function.
5742 (maintenance_flush_symbol_cache): New function.
5743 (symbol_cache_stats): New function.
5744 (maintenance_print_symbol_cache_statistics): New function.
5745 (symtab_new_objfile_observer): New function.
5746 (symtab_free_objfile_observer): New function.
5747 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
5748 (_initialize_symtab): Init symbol_cache_key. New parameter
5749 maint symbol-cache-size. New maint commands print symbol-cache,
5750 print symbol-cache-statistics, flush-symbol-cache.
5751 Install new_objfile, free_objfile observers.
5753 2015-01-31 Joel Brobecker <brobecker@adacore.com>
5756 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
5759 2015-01-31 Doug Evans <xdje42@gmail.com>
5761 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
5762 * auto-load.c: #include ctype.h.
5763 (struct auto_load_pspace_info): Replace member loaded_scripts with
5764 new members loaded_script_files, loaded_script_texts.
5765 (auto_load_pspace_data_cleanup): Update.
5766 (init_loaded_scripts_info): Update.
5767 (get_auto_load_pspace_data_for_loading): Update.
5768 (maybe_add_script_file): Renamed from maybe_add_script. All callers
5770 (maybe_add_script_text): New function.
5771 (clear_section_scripts): Update.
5772 (source_script_file, execute_script_contents): New functions.
5773 (source_section_scripts): Add support for
5774 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
5775 (print_scripts): New function.
5776 (auto_load_info_scripts): Also print inlined scripts.
5777 (maybe_print_unsupported_script_warning): Renamed from
5778 unsupported_script_warning_print. All callers updated.
5779 (maybe_print_script_not_found_warning): Renamed from
5780 script_not_found_warning_print. All callers updated.
5781 * extension-priv.h (struct extension_language_script_ops): New member
5782 objfile_script_executor.
5783 * extension.c (ext_lang_objfile_script_executor): New function.
5784 * extension.h (objfile_script_executor_func): New typedef.
5785 (ext_lang_objfile_script_executor): Declare.
5786 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
5787 * guile/guile.c (guile_extension_script_ops): Update.
5788 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
5789 * python/python.c (python_extension_script_ops): Update.
5790 (gdbpy_execute_objfile_script): New function.
5792 2015-01-31 Eli Zaretskii <eliz@gnu.org>
5794 * tui/tui-io.c (tui_expand_tabs): New function.
5795 (tui_puts, tui_redisplay_readline): Expand TABs into the
5796 appropriate number of spaces.
5797 * tui/tui-regs.c: Include tui-io.h.
5798 (tui_register_format): Call tui_expand_tabs to expand TABs into
5799 the appropriate number of spaces.
5800 * tui/tui-io.h: Add prototype for tui_expand_tabs.
5802 2015-01-30 Doug Evans <dje@google.com>
5804 * NEWS: "info source" command now display producer string if present.
5805 * source.c (source_info): Print producer string if present.
5807 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5809 * varobj.c (varobj_delete): Fix comment.
5811 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5813 * varobj.c (create_child): Modify comment.
5815 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5817 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
5819 (ada_name_of_variable): Same.
5820 (ada_path_expr_of_child): Same.
5821 (ada_value_of_variable): Same.
5822 (ada_value_is_changeable_p): Same.
5823 (ada_value_has_mutated): Same.
5824 * c-varobj.c (varobj_is_anonymous_child): Same.
5825 (c_is_path_expr_parent): Same.
5826 (c_number_of_children): Same.
5827 (c_name_of_variable): Same.
5828 (c_path_expr_of_child): Same.
5830 (c_value_of_variable): Same.
5831 (cplus_number_of_children): Same.
5832 (cplus_name_of_variable): Same.
5833 (cplus_path_expr_of_child): Same.
5834 (cplus_value_of_variable): Same.
5835 * jv-varobj.c (java_number_of_children): Same.
5836 (java_name_of_variable): Same.
5837 (java_path_expr_of_child): Same.
5838 (java_value_of_variable): Same.
5839 * varobj.c (number_of_children): Same.
5840 (name_of_variable): Same.
5842 (varobj_ensure_python_env): Same.
5843 (varobj_get_objname): Same.
5844 (varobj_get_expression): Same.
5845 (varobj_get_display_format): Same.
5846 (varobj_get_display_hint): Same.
5847 (varobj_has_more): Same.
5848 (varobj_get_thread_id): Same.
5849 (varobj_get_frozen): Same.
5850 (dynamic_varobj_has_child_method): Same.
5851 (varobj_get_gdb_type): Same.
5852 (is_path_expr_parent): Same.
5853 (varobj_default_is_path_expr_parent): Same.
5854 (varobj_get_language): Same.
5855 (varobj_get_attributes): Same.
5856 (varobj_is_dynamic_p): Same.
5857 (varobj_get_child_range): Same.
5858 (varobj_value_has_mutated): Same.
5859 (varobj_get_value_type): Same.
5860 (number_of_children): Same.
5861 (name_of_variable): Same.
5862 (check_scope): Same.
5863 (varobj_editable_p): Same.
5864 (varobj_value_is_changeable_p): Same.
5865 (varobj_floating_p): Same.
5866 (varobj_default_value_is_changeable_p): Same.
5868 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5870 * varobj.c (varobj_get_path_expr): Set var->path_expr.
5871 * c-varobj.c (c_path_expr_of_child): Set local var instead of
5873 (cplus_path_expr_of_child): Same.
5875 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5877 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
5879 (mi_cmd_var_info_expression): Same.
5880 * varobj.c (varobj_get_expression): Mention in the comment that
5881 the result must by freed by the caller.
5883 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5885 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
5887 (varobj_update_one): Same.
5888 * varobj.c (update_type_if_necessary): Free curr_type_str and
5890 (varobj_get_type): Specify in comment that the result needs to be
5891 freed by the caller.
5893 2015-01-29 Doug Evans <dje@google.com>
5896 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
5898 2015-01-25 Mark Wielaard <mjw@redhat.com>
5900 * dwarf2read.c (checkproducer): Call producer_is_gcc.
5901 * utils.c (producer_is_gcc_ge_4): Likewise.
5902 (producer_is_gcc): New function.
5903 * utils.h (producer_is_gcc): New declaration.
5905 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5907 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
5909 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
5910 parameter by "addr_stack" parameter.
5911 (resolve_dynamic_range): Replace "addr" parameter by
5912 "stack_addr" parameter. Update function documentation.
5913 Update code accordingly.
5914 (resolve_dynamic_array, resolve_dynamic_union)
5915 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
5916 (resolve_dynamic_type): Update code, following the changes made
5917 to resolve_dynamic_type_internal's interface.
5918 * dwarf2loc.h (struct property_addr_info): New.
5919 (dwarf2_evaluate_property): Replace "address" parameter
5920 by "addr_stack" parameter. Adjust function documentation.
5921 (struct dwarf2_offset_baton): New.
5922 (struct dwarf2_property_baton): Update documentation of
5923 field "referenced_type" to be more general. New field
5924 "offset_info" in union data field.
5925 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
5926 parameter by "addr_stack" parameter. Adjust code accordingly.
5927 Add support for PROP_ADDR_OFFSET properties.
5928 * dwarf2read.c (attr_to_dynamic_prop): Add support for
5929 DW_AT_data_member_location attributes as well. Use case
5930 statements instead of if/else condition.
5932 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5934 * ada-varobj.c (ada_varobj_get_array_number_of_children):
5935 Return zero if PARENT_VALUE is NULL and parent_type's
5936 range type is dynamic.
5938 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5940 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
5941 nonzero if the type's subtype is dynamic.
5942 (resolve_dynamic_range): Also resolve the range's subtype.
5944 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
5946 Pushed by Joel Brobecker <brobecker@adacore.com>.
5947 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
5949 2015-01-27 Doug Evans <dje@google.com>
5951 * NEWS: Mention gdb.Objfile.username.
5952 * python/py-objfile.c (objfpy_get_username): New function.
5953 (objfile_getset): Add "username".
5955 2015-01-24 Mark Wielaard <mjw@redhat.com>
5957 * stack.c (return_command): Markup warning message with _.
5959 2015-01-24 Doug Evans <xdje42@gmail.com>
5961 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
5963 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5965 Fix 100x slowdown regression on DWZ files.
5966 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
5967 (struct line_header): Add offset and offset_in_dwz.
5968 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
5969 (free_line_header_voidp): New declaration.
5970 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
5972 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
5973 (handle_DW_AT_stmt_list): Use line_header_hash.
5974 (free_line_header_voidp): New function.
5975 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
5976 (dwarf_decode_lines): New parameter decode_mapping, use it.
5977 (dwarf2_free_objfile): Free line_header_hash.
5979 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
5982 * valops.c (value_rtti_indirect_type): Catch exception thrown by
5985 2015-01-15 Mark Wielaard <mjw@redhat.com>
5987 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
5989 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
5990 calling_convention an 8 bit bit field.
5991 (TYPE_NO_RETURN): New macro.
5992 * infcmd.c (finish_command): Query if function does not return
5994 * stack.c (return_command): Likewise.
5996 2015-01-23 Pedro Alves <palves@redhat.com>
5998 * linux-nat.c (linux_is_async_p): New macro.
5999 (linux_nat_is_async_p):
6000 (linux_nat_terminal_inferior): Check whether the target can async
6001 instead of whether it is already async.
6002 (linux_nat_terminal_ours): Don't check whether the target is
6004 (linux_async_pipe): Use linux_is_async_p.
6006 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6008 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
6010 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
6011 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
6012 Sort tp_array using tp_array_compar.
6013 (_initialize_thread): Extend thread_apply_all_command help.
6015 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6017 * corelow.c (core_open): Call also thread_command.
6018 * gdbthread.h (thread_command): New prototype moved from ...
6019 * thread.c (thread_command): ... here.
6020 (thread_command): Make it global.
6022 2015-01-22 Pedro Alves <palves@redhat.com>
6024 * configure.ac [*mingw32*]: Check $curses_found instead of
6026 * configure: Regenerate.
6027 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
6028 HAVE_NCURSES_NCURSES_H checks.
6030 2015-01-22 Eli Zaretskii <eliz@gnu.org>
6032 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
6033 fails with the 1st arg NULL, try again with "unknown". Don't test
6034 the "cup" capability: it isn't supported by the Windows port of
6035 ncurses, but the Windows console driver is still capable of
6038 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6040 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
6042 2015-01-22 Eli Zaretskii <eliz@gnu.org>
6044 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
6045 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
6046 reason that "make TAGS" is broken.
6048 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
6050 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
6051 and check additional store instructions.
6053 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
6055 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
6057 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
6059 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
6060 ppc_canonicalize_syscall, ppc_linux_syscall_record,
6061 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
6062 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
6063 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
6064 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
6065 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
6066 ppc_process_record_op19, ppc_process_record_op31,
6067 ppc_process_record_op59, ppc_process_record_op60,
6068 ppc_process_record_op63): Likewise.
6070 2015-01-20 Joel Brobecker <brobecker@adacore.com>
6072 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
6073 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
6076 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
6078 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
6079 ppc_process_record_op31, ppc_process_record_op59,
6080 ppc_process_record_op60, ppc_process_record_op63,
6081 ppc_process_record): Fix -Wformat warning.
6082 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
6083 Remove unused variables.
6085 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
6087 * MAINTAINERS (Write After Approval): Add "Chen Gang".
6089 2015-01-19 Eli Zaretskii <eliz@gnu.org>
6091 * configure.ac [*mingw32*]: Only add windows-termcap.o to
6092 CONFIG_OBS if not building with a curses library.
6093 * configure: Regenerate.
6095 * windows-termcap.c: Include defs.h. Make the whole body empty if
6096 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
6097 HAVE_NCURSES_NCURSES_H is defined.
6099 2015-01-19 Joel Brobecker <brobecker@adacore.com>
6101 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
6102 from end of line to start of next line.
6104 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6106 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
6107 Scan PLT stub backward for reverse debugging.
6108 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
6110 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6111 Ulrich Weigand <uweigand@de.ibm.com>
6113 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
6115 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
6117 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
6118 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
6119 (ppc_linux_init_abi): Set process_record, process_record_signal.
6120 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
6121 ppc_linux_record_tdep to gdbarch_tdep.
6122 (ppc_process_record): New declaration.
6123 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
6124 ppc_process_record_op19, ppc_process_record_op31,
6125 ppc_process_record_op59, ppc_process_record_op60,
6126 ppc_process_record_op63, ppc_process_record): New functions.
6128 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6130 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
6131 rs6000_in_function_epilogue_frame_p and add an argument
6133 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
6134 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
6136 (rs6000_epilogue_frame_unwind): New.
6137 (rs6000_gdbarch_init): Append epilogue unwinder.
6139 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
6141 * nat/linux-personality.c: Replace "#ifndef
6142 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
6143 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
6146 2015-01-16 Eli Zaretskii <eliz@gnu.org>
6148 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
6150 (_initialize_tui_win) <border-kind, border-mode>:
6151 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
6152 (tui_set_tab_width_command): Fix the commentary.
6154 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
6156 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
6158 (tui_set_tab_width_command): Delete and recreate the source and
6159 the disassembly windows, to show the effect of the changed tab
6162 * tui/tui-data.h (LINE_PREFIX): Make shorter
6163 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
6164 "Thread NNNNN.XXXX" thread ID notation on Windows.
6166 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
6168 Fix gcc-5 compilation.
6169 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
6171 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
6173 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
6174 (linux-personality.o): New rule.
6175 * common/common-defs.h: Include <stdint.h>.
6176 * config/aarch64/linux.mh (NATDEPFILES): Include
6177 linux-personality.o.
6178 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
6179 * config/arm/linux.mh (NATDEPFILES): Likewise.
6180 * config/i386/linux64.mh (NATDEPFILES): Likewise.
6181 * config/i386/linux.mh (NATDEPFILES): Likewise.
6182 * config/ia64/linux.mh (NATDEPFILES): Likewise.
6183 * config/m32r/linux.mh (NATDEPFILES): Likewise.
6184 * config/m68k/linux.mh (NATDEPFILES): Likewise.
6185 * config/mips/linux.mh (NATDEPFILES): Likewise.
6186 * config/pa/linux.mh (NATDEPFILES): Likewise.
6187 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
6188 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
6189 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
6190 * config/s390/linux.mh (NATDEPFILES): Likewise.
6191 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
6192 * config/sparc/linux.mh (NATDEPFILES): Likewise.
6193 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
6194 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
6195 * defs.h: Remove #include <stdint.h> (moved to
6196 common/common-defs.h).
6197 * linux-nat.c: Include nat/linux-personality.h. Remove #include
6198 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
6199 nat/linux-personality.c).
6200 (linux_nat_create_inferior): Remove code to disable address space
6201 randomization (moved to nat/linux-personality.c). Create cleanup
6202 to disable address space randomization.
6203 * nat/linux-personality.c: New file.
6204 * nat/linux-personality.h: Likewise.
6206 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
6208 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
6209 common/posix-strerror.c.
6210 (posix-strerror.o): New rule.
6211 (mingw-strerror.o): Likewise.
6212 * common/common-utils.h (safe_strerror): Move prototype to here,
6214 * common/common.host: New file.
6215 * common/mingw-strerror.c: Likewise.
6216 * common/posix-strerror.c: Likewise.
6217 * configure: Regenerated.
6218 * configure.ac: Source common/common.host. Add variable
6219 common_host_obs to gdb_host_obs.
6220 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
6221 gdb/common/posix-strerror.c when warning about the use of
6223 * mingw-hdep.c (safe_strerror): Remove definition; move it to
6224 common/mingw-strerror.c.
6225 * posix-hdep.c (safe_strerror): Remove definition; move it to
6226 common/posix-hdep.c.
6227 * utils.h (safe_strerror): Remove prototype; move to
6228 common/common-utils.h.
6230 2015-01-15 Joel Brobecker <brobecker@adacore.com>
6234 2015-01-15 Joel Brobecker <brobecker@adacore.com>
6236 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
6237 ___XA type if the array has already been fixed.
6239 2015-01-14 Yao Qi <yao@codesourcery.com>
6241 * Makefile.in (ppc-linux.o): New rule.
6242 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
6243 * configure.ac: AC_CHECK_FUNCS(getauxval).
6244 * config.in: Re-generated.
6245 * configure: Re-generated.
6246 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
6248 * nat/ppc-linux.c: New file.
6249 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
6250 Call ppc64_64bit_inferior_p.
6252 2015-01-14 Yao Qi <yao@codesourcery.com>
6254 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
6256 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
6257 (PPC_FEATURE_HAS_DFP): Likewise.
6258 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
6259 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
6260 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
6261 Include "nat/ppc-linux.h".
6262 * nat/ppc-linux.h: New file.
6263 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
6265 2015-01-14 Pedro Alves <palves@redhat.com>
6268 * breakpoint.c: Include "interps.h".
6269 (bpstat_do_actions_1): Also check whether the interpreter is
6272 2015-01-14 Pedro Alves <palves@redhat.com>
6275 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
6276 reinstall if the interpreter is sync.
6278 2015-01-13 Doug Evans <dje@google.com>
6280 * objfiles.c (objfile_filename): New function.
6281 * objfiles.h (objfile_filename): Declare it.
6282 (objfile_name): Add function comment.
6283 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
6284 bfd file name (which may be realpath'd), and the original name.
6286 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6288 * NEWS: Create a new section for the next release branch.
6289 Rename the section of the current branch, now that it has
6292 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6294 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
6295 * version.in: Bump version to 7.9.50.DATE-cvs.
6297 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6299 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
6300 Remove trailing new-line in argument of call to warning.
6302 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6304 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
6305 new-line in argument of call to "warning".
6307 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6309 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
6310 in static block, then try searching for primitive types.
6312 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
6314 * top.h (gdb_add_history): Declare.
6315 * top.c (command_count): New variable.
6316 (gdb_add_history): New function.
6317 (gdb_safe_append_history): New static function.
6318 (quit_force): Call it.
6319 (command_line_input): Use gdb_add_history instead of
6321 * event-top.c (command_line_handler): Likewise.
6323 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
6326 * darwin-nat.c: Replace <machine/setjmp.h> #include by
6327 <setjmp.h> #include.
6329 2015-01-11 Doug Evans <xdje42@gmail.com>
6331 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
6333 2015-01-11 Doug Evans <xdje42@gmail.com>
6336 * NEWS: The "maint demangle" command is renamed as "demangle".
6337 * demangle.c: #include cli/cli-utils.h, language.h.
6338 (demangle_command): New function.
6339 (_initialize_demangle): Add new command "demangle".
6340 * maint.c (maintenance_demangle): Stub out.
6341 (_initialize_maint_cmds): Update help text for "maint demangle",
6342 and mark as deprecated.
6344 2015-01-11 Mark Kettenis <kettenis@gnu.org>
6346 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
6347 inferior_thread is a function.
6349 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
6351 * Makefile.in (.y.c): Don't munge yacc's #line
6354 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
6356 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
6357 to prompt for input.
6358 * tui/tui-hooks.c (tui_query_hook): Remove.
6359 (tui_install_hooks): Don't set deprecated_query_hook.
6360 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
6361 height calculation. Always update the command window's cur_line.
6363 2015-01-09 Pedro Alves <palves@redhat.com>
6365 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
6367 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
6369 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
6370 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
6372 (check_stopped_by_watchpoint): New function.
6373 (save_sigtrap): Reimplement.
6374 (linux_nat_stopped_by_watchpoint): Adjust.
6375 (linux_nat_lp_status_is_event): Delete.
6376 (stop_wait_callback): Only call save_sigtrap after storing the
6378 (status_callback): If the thread had been stopped for a breakpoint
6379 that has since been removed, discard the event and resume the LWP.
6380 (count_events_callback, select_event_lwp_callback): Use
6381 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
6382 (cancel_breakpoint): Rename to ...
6383 (check_stopped_by_breakpoint): ... this. Record whether the LWP
6384 stopped for a software breakpoint or hardware breakpoint.
6385 (select_event_lwp): Only give preference to the stepping LWP in
6386 all-stop mode. Adjust comments.
6387 (stop_and_resume_callback): Remove references to new_pending_p.
6388 (linux_nat_filter_event): Likewise. Leave exit events of the
6389 leader thread pending here. Handle signal short circuiting here.
6390 Only call save_sigtrap after storing the pending waitstatus.
6391 (linux_nat_wait_1): Remove 'retry' label. Remove references to
6392 new_pending. Don't handle leaving events the caller is not
6393 interested in pending here, nor handle signal short-circuiting
6394 here. Also give equal priority to all LWPs that have had events
6395 in non-stop mode. If reporting a software breakpoint event,
6396 unadjust the LWP's PC.
6397 * linux-nat.h (enum lwp_stop_reason): New.
6398 (struct lwp_info) <stop_pc>: New field.
6399 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
6400 (struct lwp_info) <stop_reason>: New field.
6401 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
6403 2015-01-09 Pedro Alves <palves@redhat.com>
6405 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
6406 Set the LWP's 'resumed' flag.
6408 2015-01-09 Pedro Alves <palves@redhat.com>
6410 * linux-nat.c (linux_resume_one_lwp): New function.
6411 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
6412 (linux_nat_resume): Use lwp_status_pending_p and
6413 linux_resume_one_lwp.
6414 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
6415 (linux_handle_extended_wait): Use linux_resume_one_lwp.
6416 (status_callback, running_callback): Use lwp_status_pending_p.
6417 (lwp_status_pending_p): New function.
6418 (stop_and_resume_callback): Use lwp_status_pending_p.
6419 (linux_nat_filter_event): Use linux_resume_one_lwp.
6420 (linux_nat_wait_1): Always use status_callback to look for an LWP
6421 with a pending status. Use linux_resume_one_lwp.
6422 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
6423 linux_resume_one_lwp.
6425 2015-01-09 Pedro Alves <palves@redhat.com>
6427 * breakpoint.c (bp_location_inserted_here_p): New function,
6428 factored out from ...
6429 (breakpoint_inserted_here_p): ... here. Use
6430 ALL_BP_LOCATIONS_AT_ADDR.
6431 (software_breakpoint_inserted_here_p): Use
6432 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
6434 2014-01-09 Pedro Alves <palves@redhat.com>
6436 Skip enabling event reporting if the kernel supports
6438 * linux-thread-db.c: Include "nat/linux-ptrace.h".
6439 (thread_db_use_events): New function.
6440 (try_thread_db_load_1): Check thread_db_use_events before enabling
6442 (update_thread_state): New function.
6443 (attach_thread): Use it. Check thread_db_use_events before
6444 enabling event reporting.
6445 (thread_db_detach): Check thread_db_use_events before disabling
6447 (find_new_threads_callback): Check thread_db_use_events before
6448 enabling event reporting. Update the thread's state if not using
6449 libthread_db events.
6451 2015-01-09 Pedro Alves <palves@redhat.com>
6453 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
6454 about to wait for is > 0.
6455 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
6456 the kernel thread ID is -1.
6458 2015-01-09 Pedro Alves <palves@redhat.com>
6460 * linux-nat.c (attach_proc_task_lwp_callback): New function.
6461 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
6462 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
6463 ptrace option flags.
6464 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
6466 * nat/linux-procfs.c: Include <dirent.h>.
6467 (linux_proc_get_int): New parameter "warn". Handle it.
6468 (linux_proc_get_tgid): Adjust.
6469 (linux_proc_get_tracerpid): Rename to ...
6470 (linux_proc_get_tracerpid_nowarn): ... this.
6471 (linux_proc_pid_get_state): New function, factored out from
6472 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
6474 (linux_proc_pid_is_gone): New function.
6475 (linux_proc_pid_is_stopped): Adjust.
6476 (linux_proc_pid_is_zombie_maybe_warn)
6477 (linux_proc_pid_is_zombie_nowarn): New functions.
6478 (linux_proc_pid_is_zombie): Use
6479 linux_proc_pid_is_zombie_maybe_warn.
6480 (linux_proc_attach_tgid_threads): New function.
6481 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
6482 (linux_proc_get_tracerpid): Rename to ...
6483 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
6484 (linux_proc_pid_is_gone): New declaration.
6485 (linux_proc_pid_is_zombie): Update comment.
6486 (linux_proc_pid_is_zombie_nowarn): New declaration.
6487 (linux_proc_attach_lwp_func): New typedef.
6488 (linux_proc_attach_tgid_threads): New declaration.
6489 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
6490 use nowarn functions.
6491 (linux_ptrace_attach_fail_reason_string): Move here from
6492 gdbserver/linux-low.c and rename.
6493 (ptrace_supports_feature): If the current ptrace options are not
6494 known yet, check them now, instead of asserting.
6495 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
6498 2015-01-09 Pedro Alves <palves@redhat.com>
6500 * linux-thread-db.c (thread_db_find_new_threads_silently)
6501 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
6502 (find_new_threads_once): Print debug output on gdb_stdlog.
6504 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
6505 Pedro Alves <palves@redhat.com>
6507 * compile/compile.c: Include "gdb_wait.h".
6508 (do_rmdir): Check return value, and free 'zap'.
6510 2015-01-08 Pedro Alves <palves@redhat.com>
6511 Yao Qi <yao@codesourcery.com>
6513 * dwarf2loc.c (indirect_pieced_value): Don't call
6514 gdb_sign_extend. Call extract_signed_integer instead.
6515 * utils.c (gdb_sign_extend): Remove.
6516 * utils.h (gdb_sign_extend): Remove declaration.
6518 2015-01-07 Pierre Muller <muller@sourceware.org>
6521 * stabsread.c (define_symbol): Set language for C++ special symbols.
6523 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
6525 * inflow.c (initial_gdb_ttystate): Tweak comment.
6527 2015-01-07 Joel Brobecker <brobecker@adacore.com>
6529 * inflow.c (set_initial_gdb_ttystate): Add empty line after
6530 comment documenting function.
6532 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
6534 * terminal.h (set_initial_gdb_ttystate): Declare.
6535 * inflow.c (initial_gdb_ttystate): New static variable.
6536 (set_initial_gdb_ttystate): New setter.
6537 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
6538 instead of our current terminal state.
6539 * top.c (gdb_init): Call set_initial_gdb_ttystate.
6541 2015-01-07 Joel Brobecker <brobecker@adacore.com>
6543 * guile/scm-type.c (tyscm_array_1): Add comment.
6544 * python/py-type.c (typy_array_1): Add comment.
6546 2015-01-06 Joel Brobecker <brobecker@adacore.com>
6548 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
6549 error if N2 is equal to N1 - 1.
6551 2015-01-06 Joel Brobecker <brobecker@adacore.com>
6553 * python/py-type.c (typy_array_1): Do not raise negative-length
6554 exception if N2 is equal to N1 - 1.
6556 2015-01-03 Doug Evans <xdje42@gmail.com>
6558 * c-exp.y: Whitespace cleanup.
6559 (classify_inner_name): Remove extra ;.
6561 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
6563 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
6566 2015-01-02 Doug Evans <dje@google.com>
6568 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
6570 2015-01-02 Doug Evans <dje@google.com>
6572 * symtab.h (struct symbol): Fix typo in comment.
6574 2015-01-01 Joel Brobecker <brobecker@adacore.com>
6576 Update year range in copyright notice of all files.
6578 2015-01-01 Joel Brobecker <brobecker@adacore.com>
6580 * top.c (print_gdb_version): Update copyright year to 2015.
6582 2015-01-01 Joel Brobecker <brobecker@adacore.com>
6584 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
6586 For older changes see ChangeLog-2014.
6592 version-control: never