gdb/ChangeLog

   1 2015-06-23  Doug Evans  <dje@google.com>
   2
   3         * inferior.h (struct inferior_suspend_state): Delete, unused.
   4         All references deleted.
   5
   6 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
   7
   8         * microblaze-tdep.c (microblaze_push_dummy_code): Delete.
   9         (microblaze_push_dummy_call): Likewise.
  10         (microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
  11         and set_gdbarch_push_dummy_call.
  12
  13 2015-06-23  Yao Qi  <yao.qi@linaro.org>
  14
  15         * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
  16         Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
  17         (amd64_linux_store_inferior_registers): Likewise.
  18         * arm-linux-nat.c (fetch_fpregister): Likewise.
  19         (fetch_fpregs, store_fpregister): Likewise.
  20         (store_fpregister, store_fpregs): Likewise.
  21         (fetch_register, fetch_regs): Likewise.
  22         (store_register, store_regs): Likewise.
  23         (fetch_vfp_regs, store_vfp_regs): Likewise.
  24         (arm_linux_read_description): Check have_ptrace_getregset is
  25         TRIBOOL_UNKNOWN.  Set have_ptrace_getregset to TRIBOOL_TRUE
  26         or TRIBOOL_FALSE.
  27         * i386-linux-nat.c (fetch_xstateregs): Check
  28         have_ptrace_getregset is not TRIBOOL_TRUE.
  29         (store_xstateregs): Likewise.
  30         * linux-nat.c (have_ptrace_getregset): Change its type to
  31         enum tribool.
  32         * linux-nat.h (tribool): New enum.
  33         * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
  34         Check whether have_ptrace_getregset is TRIBOOL_TRUE.
  35
  36 2015-06-19  Doug Evans  <dje@google.com>
  37
  38         * NEWS: Mention Sun's version of stabs is no longer supported.
  39         * elfread.c (free_elfinfo): Delete.  All uses updated.
  40         (elfstab_offset_sections): Delete.  All uses updated.
  41         * gdb-stabs.h (stab_section_info): Delete.  All uses updated.
  42         * psympriv.h (partial_symtab) <section_offsets>: Delete.
  43         All uses updated.
  44         * psymtab.c (start_psymtab_common): Delete arg section_offsets.
  45         All callers updated.
  46
  47 2015-06-18  Simon Marchi  <simon.marchi@ericsson.com>
  48
  49         * common/rsp-low.c (needs_escaping): New.
  50         (remote_escape_output): Add unit_size parameter. Refactor to
  51         support multi-byte addressable units.  Rename parameters.
  52         * common/rsp-low.h (remote_escape_output): Add unit_size
  53         parameter and rename others. Update doc.
  54         * remote.c (align_for_efficient_write): New.
  55         (remote_write_bytes_aux): Add unit_size parameter and use it.
  56         Rename some variables.  Update doc.
  57         (remote_xfer_partial): Get unit size and use it.
  58         (remote_read_bytes_1): Add unit_size parameter and use it.
  59         Rename some variables. Update doc.
  60         (remote_write_bytes): Same.
  61         (remote_xfer_live_readonly_partial): Same.
  62         (remote_read_bytes): Same.
  63         (remote_flash_write): Update call to remote_write_bytes_aux.
  64         (remote_write_qxfer): Update call to remote_escape_output.
  65         (remote_search_memory): Same.
  66         (remote_hostio_pwrite): Same.
  67
  68 2015-06-17  Luis Machado  <lgustavo@codesourcery.com>
  69
  70         * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
  71         locations as inserted.
  72         Update and expand comment about permanent locations.
  73         (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
  74         Move comment to add_location_to_breakpoint.
  75         (update_global_location_list): Don't error out if a permanent
  76         breakpoint is not marked inserted.
  77         Don't error out if a non-permanent breakpoint location is inserted on
  78         top of a permanent breakpoint.
  79
  80 2015-06-17  Luis Machado  <lgustavo@codesourcery.com>
  81
  82         * breakpoint.c (make_breakpoint_permanent): Remove unused
  83         function.
  84         * breakpoint.h (make_breakpoint_permanent): Remove declaration.
  85
  86 2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>
  87
  88         PR gdb/16999
  89         * NEWS: Mention new GDBHISTSIZE behavior.
  90         * top.c (init_history): For null or out-of-range GDBHISTSIZE,
  91         set history size to unlimited.  Ignore non-numeric GDBHISTSIZE.
  92
  93 2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>
  94
  95         * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
  96         * top.c (init_history): Read from GDBHISTSIZE instead of
  97         HISTSIZE.
  98         (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
  99
 100 2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>
 101
 102         * top.c (gdb_safe_append_history): Do not call
 103         history_truncate_file if the history is not stifled.
 104
 105 2015-06-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 106
 107         * syscalls/s390-linux.xml: Add syscalls 344 through 354.
 108         * syscalls/s390x-linux.xml: Likewise.
 109
 110 2015-06-16  Michael Eager  <eager@eagercon.com>
 111
 112         * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
 113
 114 2015-06-16  Patrick Palka  <patrick@parcs.ath.cx>
 115
 116         * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
 117         target_terminal_ours_for_output() before calling
 118         tui_show_frame_info(), and restore the original terminal
 119         settings afterwards.
 120
 121 2015-06-16  Martin Simmons  <martin@lispworks.com>  (tiny patch)
 122
 123         * arm-linux-nat.c: Include nat/linux-ptrace.h.
 124
 125 2015-06-15  Simon Marchi  <simon.marchi@ericsson.com>
 126
 127         * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
 128         memory unit size.
 129         (mi_cmd_data_write_memory_bytes): Same.
 130
 131 2015-06-15  Simon Marchi  <simon.marchi@ericsson.com>
 132
 133         * corefile.c (write_memory): Update doc.
 134         * gdbcore.h (write_memory): Same.
 135
 136 2015-06-15  Jan Kratochvil  <jan.kratochvil@redhat.com>
 137
 138         * linux-tdep.c (enum filterflags): Make it from anonymous enum.
 139         (dump_mapping_p): Use it for parameter filterflags.
 140         (linux_find_memory_regions_full): Use it for variable filterflags.
 141
 142 2015-06-15  Aleksandar Ristovski  <aristovski@qnx.com
 143             Jan Kratochvil  <jan.kratochvil@redhat.com>
 144
 145         Merge multiple hex conversions.
 146         * monitor.c: Include rsp-low.h.
 147         (fromhex): Remove definition.
 148
 149 2015-06-15  Aleksandar Ristovski  <aristovski@qnx.com
 150             Jan Kratochvil  <jan.kratochvil@redhat.com>
 151
 152         Move utility functions to common/.
 153         * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
 154         Move defs to common/common-utils.c.
 155         * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
 156         (skip_to_space_const): Move decls to common/common-utils.h.
 157         * common/common-defs.h: Move include of common-types.h before
 158         common-utils.h.
 159         * common/common-utils.c: Include host-defs.h and ctype.h.
 160         (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
 161         from utils.c.
 162         (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
 163         cli/cli-utils.c.
 164         * common/common-utils.h (strtoulst): Move decl from utils.h.
 165         (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
 166         Move from cli/cli-utils.h.
 167         * common/host-defs.h: Include limits.h.
 168         (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
 169         (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
 170         * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
 171         common/common-utils.h.
 172         * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
 173         (strtoulst): Move to common/common-utils.c.
 174         * utils.h (strtoulst): Moved decl to common/common-utils.h.
 175
 176 2015-06-15  Yao Qi  <yao.qi@linaro.org>
 177
 178         * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
 179
 180 2015-06-10  Jon Turney  <jon.turney@dronecode.org.uk>
 181
 182         * build-id.c: Don't include elf-bfd.h.
 183         (build_id_bfd_get): Use bfd_build_id.
 184         (build_id_verify): Ditto.
 185         * build-id.h: Ditto.
 186         (find_separate_debug_file_by_buildid): Ditto.
 187         * python/py-objfile.c: Don't include elf-bfd.h.
 188         (objfpy_get_build_id) Use bfd_build_id.
 189         (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
 190         * coffread.c: Include build-id.h.
 191         (coff_symfile_read): Try find_separate_debug_file_by_buildid.
 192
 193 2015-06-03  Jon Turney  <jon.turney@dronecode.org.uk>
 194
 195         * windows-nat.c (do_windows_fetch_inferior_registers)
 196         (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
 197         conditional with __CYGWIN__.
 198
 199 2015-06-13  Andrew Burgess  <andrew.burgess@embecosm.com>
 200
 201         * completer.c: Add arch-utils.h include.
 202         (enum reg_completer_targets): New enum.
 203         (reg_or_group_completer_1): New function containing old
 204         reg_or_group_completer, add and use new parameter to control what
 205         is completed on.  Use get_current_arch rather than architecture of
 206         currently selected frame.
 207         (reg_or_group_completer): Call new reg_or_group_completer_1.
 208         (reggroup_completer): Call new reg_or_group_completer_1.
 209         * completer.h (reggroup_completer): Add declaration.
 210         * tui/tui-regs.c: Add 'completer.h' include.
 211         (tui_reg_next_command): Renamed to...
 212         (tui_reg_next): ...this.  Adjust parameters and return rather than
 213         display new group.
 214         (tui_reg_prev_command): Renamed to...
 215         (tui_reg_prev): ...this.  Adjust parameters and return rather than
 216         display new group.
 217         (tui_reg_float_command): Delete.
 218         (tui_reg_general_command): Delete.
 219         (tui_reg_system_command): Delete.
 220         (tui_reg_command): Rewrite to perform switching of register group.
 221         Add header comment.
 222         (tuireglist): Remove.
 223         (tui_reggroup_completer): New function.
 224         (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
 225         creation of 'tui reg' command.
 226         * NEWS: Add comment about 'tui reg' changes.
 227
 228 2015-06-12  Simon Marchi  <simon.marchi@ericsson.com>
 229
 230         * target.c (target_read): Consider addressable unit size when
 231         reading from a memory object.
 232         (read_memory_robust): Same.
 233         (read_whatever_is_readable): Same.
 234         (target_write_with_progress): Consider addressable unit size
 235         when writing to a memory object.
 236         * target.h (target_read): Update documentation.
 237         (target_write): Add documentation.
 238
 239 2015-06-12  Simon Marchi  <simon.marchi@ericsson.com>
 240
 241         * arch-utils.h (default_addressable_memory_unit_size): New.
 242         * arch-utils.c (default_addressable_memory_unit_size): New.
 243         * gdbarch.sh (addressable_memory_unit_size): New.
 244         * gdbarch.h: Re-generate.
 245         * gdbarch.c: Re-generate.
 246
 247 2015-06-12  Simon Marchi  <simon.marchi@ericsson.com>
 248
 249         * target.c (target_read): Rename variables and use
 250         TARGET_XFER_E_IO.
 251         (target_read_with_progress): Same.
 252         (read_memory_robust): Constify parameters and rename
 253         variables.
 254         (read_whatever_is_readable): Constify parameters,
 255         rename variables, adjust formatting.
 256         * target.h (read_memory_robust): Constify parameters.
 257
 258 2015-06-12  Ulrich Weigand  <uweigand@de.ibm.com>
 259
 260         * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
 261         synthetic (non-AltiVec) vector types.
 262         (ppc64_sysv_abi_return_value): Likewise.
 263
 264 2015-06-12  Antoine Tremblay  <antoine.tremblay@ericsson.com>
 265
 266         PR breakpoints/16465
 267         * breakpoint.c (create_breakpoint): Save extra_string for
 268         pending breakpoints.
 269
 270 2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>
 271
 272         * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
 273         and bt_mask to CORE_ADDR.
 274
 275 2015-06-11  Gary Benson <gbenson@redhat.com>
 276
 277         * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
 278         (mnsh_recv_message): Likewise.
 279
 280 2015-06-11  Walfred Tedeschi  <walfred.tedeschi@intel.com>
 281
 282         * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
 283         long long int and plongest instead of %ll.
 284
 285 2015-06-11  Gary Benson <gbenson@redhat.com>
 286
 287         * nat/linux-namespaces.c (gdb_wait.h): New include.
 288         (sys/wait.h): Do not include.
 289
 290 2015-06-10  Simon Marchi  <simon.marchi@ericsson.com>
 291
 292         * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
 293         end_sequence is true.
 294
 295 2015-06-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
 296
 297         Code cleanup.
 298         * solib-target.c (library_list_start_list): Use explicit NULL
 299         comparison.
 300
 301 2015-06-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
 302
 303         * solib-target.c (library_list_start_list): Do not dereference
 304         variable version in its initialization.  Make the VERSION check handle
 305         NULL.
 306         (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
 307
 308 2015-06-10  Gary Benson <gbenson@redhat.com>
 309
 310         * NEWS: Announce support for direct access of executable and
 311         shared library files when attaching to inferiors in containers
 312         on GNU/Linux systems.
 313
 314 2015-06-10  Gary Benson <gbenson@redhat.com>
 315
 316         * remote.c (struct remote_state) <fs_pid>: New field.
 317         (new_remote_state): Initialize the above.
 318         (PACKET_vFile_setfs): New enum value.
 319         (remote_hostio_set_filesystem): New function.
 320         (remote_hostio_open): Call the above.
 321         (remote_hostio_unlink): Likewise.
 322         (remote_hostio_readlink): Likewise.
 323         (_initialize_remote): Register new "set/show remote
 324         hostio-setfs-packet" command.
 325         * NEWS: Announce new vFile:setfs packet.
 326
 327 2015-06-10  Gary Benson <gbenson@redhat.com>
 328
 329         * linux-nat.c (nat/linux-namespaces.h): New include.
 330         (fileio.h): Likewise.
 331         (linux_nat_filesystem_is_local): New function.
 332         (linux_nat_fileio_pid_of): Likewise.
 333         (linux_nat_fileio_open): Likewise.
 334         (linux_nat_fileio_readlink): Likewise.
 335         (linux_nat_fileio_unlink): Likewise.
 336         (linux_nat_add_target): Initialize to_filesystem_is_local,
 337         to_fileio_open, to_fileio_readlink and to_fileio_unlink.
 338         (_initialize_linux_nat): New "set/show debug linux-namespaces"
 339         commands.
 340         * NEWS: Mention new "set/show debug linux-namespaces" commands.
 341
 342 2015-06-10  Gary Benson <gbenson@redhat.com>
 343
 344         * target.h (struct inferior): New forward declaration.
 345         (struct target_ops) <to_filesystem_is_local>: Update comment.
 346         (struct target_ops) <to_fileio_open>: New argument inf.
 347         Update comment.  All implementations updated.
 348         (struct target_ops) <to_fileio_unlink>: Likewise.
 349         (struct target_ops) <to_fileio_readlink>: Likewise.
 350         (target_filesystem_is_local): Update comment.
 351         (target_fileio_open): New argument inf.  Update comment.
 352         (target_fileio_unlink): Likewise.
 353         (target_fileio_readlink): Likewise.
 354         (target_fileio_read_alloc): Likewise.
 355         (target_fileio_read_stralloc): Likewise.
 356         * target.c (target_fileio_open): New argument inf.
 357         Pass inf to implementation.  Update debug printing.
 358         (target_fileio_unlink): Likewise.
 359         (target_fileio_readlink): Likewise.
 360         (target_fileio_read_alloc_1): New argument inf. Pass inf
 361         to target_fileio_open.
 362         (target_fileio_read_alloc): New argument inf. Pass inf to
 363         target_fileio_read_alloc_1.
 364         (target_fileio_read_stralloc): Likewise.
 365         * gdb_bfd.c (inferior.h): New include.
 366         (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
 367         argument with new argument "inferior".  Pass inferior to
 368         target_fileio_open.
 369         (gdb_bfd_open): Supply inferior argument to
 370         gdb_bfd_iovec_fileio_open.
 371         * linux-tdep.c (linux_info_proc): Supply inf argument to
 372         relevant target_fileio calls.
 373         (linux_find_memory_regions_full): Likewise.
 374         (linux_fill_prpsinfo): Likewise.
 375         * remote.c (remote_filesystem_is_local): Supply inf
 376         argument to remote_hostio_open.
 377         (remote_file_put): Likewise.
 378         (remote_file_get): Likewise.
 379         (remote_file_delete): Supply inf argument to
 380         remote_hostio_unlink.
 381
 382 2015-06-10  Gary Benson <gbenson@redhat.com>
 383
 384         * inf-child.c (inf_child_fileio_open): Replace comment.
 385         (inf_child_fileio_pwrite): Likewise.
 386         (inf_child_fileio_pread): Likewise.
 387         (inf_child_fileio_fstat): Insert blank line before comment.
 388         (inf_child_fileio_close): Replace comment.
 389         (inf_child_fileio_unlink): Likewise.
 390         (inf_child_fileio_readlink): Likewise.
 391         * remote.c (remote_hostio_open): Likewise.
 392         (remote_hostio_pread): Likewise.
 393         (remote_hostio_pwrite): Likewise.
 394         (remote_hostio_close): Likewise.
 395         (remote_hostio_unlink): Likewise.
 396         (remote_hostio_readlink): Likewise.
 397         (remote_hostio_fstat): Likewise.
 398         (remote_filesystem_is_local): Likewise.
 399         * target.c (target_fileio_open): Likewise.
 400         (target_fileio_pwrite): Likewise.
 401         (target_fileio_pread): Likewise.
 402         (target_fileio_fstat): Insert blank line before comment.
 403         (target_fileio_close): Replace comment.
 404         (target_fileio_unlink): Likewise.
 405         (target_fileio_readlink): Likewise.
 406         (target_fileio_read_alloc): Likewise.
 407         (target_fileio_read_stralloc): Likewise.
 408
 409 2015-06-10  Gary Benson <gbenson@redhat.com>
 410
 411         * linux-thread-db.c (nat/linux-namespaces.h): New include.
 412         (check_pid_namespace_match): Use linux_ns_same rather than
 413         linux_proc_pid_get_ns to spot PID namespace mismatches.
 414         * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
 415         * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
 416
 417 2015-06-10  Gary Benson <gbenson@redhat.com>
 418
 419         * configure.ac (AC_CHECK_FUNCS): Add setns.
 420         * config.in: Regenerate.
 421         * configure: Likewise.
 422         * nat/linux-namespaces.h: New file.
 423         * nat/linux-namespaces.c: Likewise.
 424         * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
 425         (linux-namespaces.o): New rule.
 426         * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
 427         * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
 428         * config/arm/linux.mh (NATDEPFILES): Likewise.
 429         * config/i386/linux.mh (NATDEPFILES): Likewise.
 430         * config/i386/linux64.mh (NATDEPFILES): Likewise.
 431         * config/ia64/linux.mh (NATDEPFILES): Likewise.
 432         * config/m32r/linux.mh (NATDEPFILES): Likewise.
 433         * config/m68k/linux.mh (NATDEPFILES): Likewise.
 434         * config/mips/linux.mh (NATDEPFILES): Likewise.
 435         * config/pa/linux.mh (NATDEPFILES): Likewise.
 436         * config/powerpc/linux.mh (NATDEPFILES): Likewise.
 437         * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
 438         * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
 439         * config/s390/linux.mh (NATDEPFILES): Likewise.
 440         * config/sparc/linux.mh (NATDEPFILES): Likewise.
 441         * config/sparc/linux64.mh (NATDEPFILES): Likewise.
 442         * config/tilegx/linux.mh (NATDEPFILES): Likewise.
 443         * config/xtensa/linux.mh (NATDEPFILES): Likewise.
 444
 445 2015-06-10  Gary Benson <gbenson@redhat.com>
 446
 447         * utils.h (make_cleanup_close): Moved to common/filestuff.h.
 448         * utils.c (do_close_cleanup): Moved to common/filestuff.c.
 449         (make_cleanup_close): Likewise.
 450         * common/filestuff.h (make_cleanup_close): Moved from utils.h.
 451         * common/filestuff.c (do_close_cleanup): Moved from utils.c.
 452         (make_cleanup_close): Likewise.
 453
 454 2015-06-03  Jon Turney  <jon.turney@dronecode.org.uk>
 455
 456         * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
 457         from SuspendThread().
 458
 459 2015-06-03  Jon Turney  <jon.turney@dronecode.org.uk>
 460
 461         * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
 462         from OutputDebugString.
 463
 464 2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>
 465                         Mircea Gherzan  <mircea.gherzan@intel.com>
 466
 467         * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
 468         MPX_BT_MASK_32): New macros.
 469         (i386_mpx_set_bounds): New function that implements
 470         the command "set-mpx-bound".
 471         (i386_mpx_enabled): Helper function to test MPX availability.
 472         (i386_mpx_bd_base): Helper function to calculate the base directory
 473         address.
 474         (i386_mpx_get_bt_entry): Helper function to access a bound
 475         table entry.
 476         (i386_mpx_print_bounds): Effectively display bound information.
 477         (_initialize_i386_tdep): Add new commands to commands "set mpx" and
 478         "show mpx".
 479         (_initialize_i386_tdep):
 480         Add "bound" to the commands "show mpx" and "set mpx" commands.
 481         (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
 482         and "show mpx" commands.
 483         * NEWS: List new commands for MPX support.
 484
 485 2015-06-09  Gary Benson <gbenson@redhat.com>
 486
 487         * common/fileio.h (fileio_to_host_mode): New declaration.
 488         * common/fileio.c (fileio_to_host_mode): New Function.
 489         * inf-child.c (inf_child_fileio_open): Process mode argument
 490         with fileio_to_host_mode.
 491
 492 2015-06-09  Gary Benson <gbenson@redhat.com>
 493
 494         * common/fileio.c (fileio_mode_pack): Fix preprocessor
 495         conditional.
 496
 497 2015-06-05  Gary Benson <gbenson@redhat.com>
 498
 499         * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
 500         * remote.c (remote_filesystem_is_local): ...here.
 501
 502 2015-06-04  Yao Qi  <yao.qi@linaro.org>
 503
 504         * gdbarch.c: Regenerate it.
 505
 506 2015-06-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
 507
 508         * arch-utils.c (default_infcall_munmap): New.
 509         * arch-utils.h (default_infcall_munmap): New declaration.
 510         * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
 511         (munmap_list_free, munmap_listp_free_cleanup): New.
 512         (struct setup_sections_data): Add field munmap_list_headp.
 513         (setup_sections): Call munmap_list_add.
 514         (compile_object_load): New variable munmap_list_head, initialize
 515         setup_sections_data.munmap_list_headp, return munmap_list_head.
 516         * compile/compile-object-load.h (struct munmap_list): New declaration.
 517         (struct compile_module): Add field munmap_list_head.
 518         (munmap_list_free): New declaration.
 519         * compile/compile-object-run.c (struct do_module_cleanup): Add field
 520         munmap_list_head.
 521         (do_module_cleanup): Call munmap_list_free.
 522         (compile_object_run): Pass munmap_list_head to do_module_cleanup.
 523         * gdbarch.c: Regenerate.
 524         * gdbarch.h: Regenerate.
 525         * gdbarch.sh (infcall_munmap): New.
 526         * linux-tdep.c (linux_infcall_munmap): New.
 527         (linux_init_abi): Install it.
 528
 529 2015-06-02  Simon Marchi  <simon.marchi@ericsson.com>
 530
 531         PR gdb/15564
 532         * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
 533
 534 2015-06-02  Yao Qi  <yao.qi@linaro.org>
 535
 536         * i386-linux-nat.c: Include linux-nat.h.
 537
 538 2015-06-01  Andreas Schwab  <schwab@linux-m68k.org>
 539             Jan Kratochvil  <jan.kratochvil@redhat.com>
 540
 541         PR symtab/18392
 542         * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
 543         assertion.
 544         * dwarf2loc.c (chain_candidate): Likewise.
 545
 546 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 547
 548         * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
 549         (store_vfp_regs): Use PTRACE_SETREGSET.
 550
 551 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 552
 553         * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
 554         (fetch_fpregs): Likewise.
 555         * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
 556         (store_fpregs): Likewise.
 557
 558 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 559
 560         * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
 561         (fetch_regs): Likewise.
 562         (store_regs): Use PTRACE_SETREGSET.
 563         (store_register): Likewise.
 564
 565 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 566
 567         * arm-linux-nat.c (arm_linux_read_description): Check whether
 568         kernel supports PTRACE_GETREGSET.
 569
 570 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 571
 572         * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
 573         * linux-nat.c: ... here.
 574         * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
 575         to ...
 576         * linux-nat.h: ... here.
 577
 578 2015-06-01  Yao Qi  <yao.qi@linaro.org>
 579
 580         * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
 581         * i386-linux-nat.c: Likewise.
 582         * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
 583         * s390-linux-nat.c: Include "nat/linux-ptrace.h".
 584         (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
 585         * x86-linux-nat.c: Include "nat/linux-ptrace.h".
 586         * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
 587
 588 2015-05-30  Eli Zaretskii  <eliz@gnu.org>
 589
 590         * go32-nat.c (go32_xfer_memory): Fix the return value to be
 591         compatible to what read_child and write_child return.  This
 592         unbreaks that DJGPP build of GDB which was broken since v7.7.
 593
 594 2015-05-29  Martin Galvan  <martin.galvan@tallertechnologies.com>
 595
 596         * MAINTAINERS (Write After Approval): Add Martin Galvan.
 597
 598 2015-05-29  Roland McGrath  <mcgrathr@google.com>
 599
 600         PR gdb/18464
 601         * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
 602         rather than internal_error for an unrecognized value.
 603
 604 2015-05-29  Max Filippov  <jcmvbkbc@gmail.com>
 605
 606         * xtensa-tdep.c (xtensa_pseudo_register_read)
 607         (xtensa_pseudo_register_write): Don't alias last pseudo register
 608         to a1.
 609
 610 2015-05-28  Don Breazeal  <donb@codesourcery.com>
 611
 612         * infrun.c (follow_fork_inferior): Ensure the use of
 613         process-style ptids (pid,0,0) in verbose/debug "Detaching"
 614         messages.
 615
 616 2015-05-28  Doug Evans  <dje@google.com>
 617
 618         * dwarf2read.c (record_line_ftype): Remove, duplicate.
 619
 620 2015-05-28  Yao Qi  <yao.qi@linaro.org>
 621
 622         * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
 623         (arm_linux_fetch_inferior_registers): Use
 624         tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
 625         (arm_linux_store_inferior_registers): Likewise.
 626         (arm_linux_read_description): Don't set
 627         arm_linux_has_wmmx_registers.
 628         * arm-tdep.c (arm_gdbarch_init): Set
 629         tdep->have_wmmx_registers according target descriptions.
 630         * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
 631         field.
 632
 633 2015-05-28  Yao Qi  <yao.qi@linaro.org>
 634
 635         * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
 636         (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
 637         instead of arm_linux_vfp_register_count.
 638         (store_vfp_regs): Likewise.
 639         (arm_linux_fetch_inferior_registers): Likewise.
 640         (arm_linux_store_inferior_registers): Likewise.
 641         (arm_linux_read_description): Don't set
 642         arm_linux_vfp_register_count.
 643         * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
 644         Adjust.
 645         * arm-tdep.c (arm_gdbarch_init): Add assert on
 646         vfp_register_count.
 647         * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
 648         field to vfp_register_count.  All users updated.
 649
 650 2015-05-28  Kyle Huey  <me@kylehuey.com>  (tiny patch)
 651
 652         * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
 653         ELFOSABI_GNU binaries.
 654
 655 2015-05-27  Doug Evans  <dje@google.com>
 656
 657         * dwarf2read.c (lnp_state_machine): New typedef.
 658         (lnp_reader_state): New typedef.
 659         (dwarf_record_line_1): Renamed from dwarf_record_line.
 660         All callers updated.
 661         (dwarf_record_line): New function.
 662         (init_lnp_state_machine): New function.
 663         (check_line_address): Replace p_record_line parameter with state.
 664         All callers updated.
 665         (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
 666         Update to record state in lnp_state_machine.
 667
 668 2015-05-27  Doug Evans  <dje@google.com>
 669
 670         * dwarf2read.c (record_line_ftype): New typedef.
 671         (check_line_address): New function.
 672         (dwarf_decode_lines_1): Call it.
 673
 674 2015-05-27  Doug Evans  <dje@google.com>
 675
 676         * NEWS: Mention "set debug dwarf-line".
 677         * dwarf2read.c (dwarf_line_debug): New static global.
 678         (add_include_dir): Add debug dwarf-line support.
 679         (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
 680         (_initialize_dwarf2_read): New parameter "debug dwarf-line".
 681
 682 2015-05-27  Doug Evans  <dje@google.com>
 683
 684         * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
 685         All callers updated.
 686         (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
 687         * cp-support.h (cp_lookup_nested_symbol): Update.
 688
 689 2015-05-27  Doug Evans  <dje@google.com>
 690
 691         PR symtab/18258
 692         * block.c (block_find_symbol): New function.
 693         (block_find_non_opaque_type): Ditto.
 694         (block_find_non_opaque_type_preferred): Ditto.
 695         * block.h (block_symbol_matcher_ftype): New typedef.
 696         (block_find_symbol): Declare.
 697         (block_find_non_opaque_type): Ditto.
 698         (block_find_non_opaque_type_preferred): Ditto.
 699         * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
 700         * psymtab.c (psym_lookup_symbol): Ditto.
 701         * symtab.c (basic_lookup_transparent_type_1): New function.
 702         (basic_lookup_transparent_type): Call it.
 703
 704 2015-05-27  Yao Qi  <yao.qi@linaro.org>
 705
 706         * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
 707         AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
 708
 709 2015-05-27  Yao Qi  <yao.qi@linaro.org>
 710
 711         * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
 712         before operator &&.
 713         (aarch64_record_load_store): Likewise.
 714
 715 2015-05-26  Doug Evans  <dje@google.com>
 716
 717         PR c++/18141, c++/18417.
 718         * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
 719         a typedef.
 720
 721 2015-05-26  Doug Evans  <dje@google.com>
 722
 723         * NEWS: Add entries for command renamings.
 724         * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
 725         All uses updated.
 726         (dwarf_die_debug): Renamed from dwarf2_die_debug.  All uses updated.
 727         (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
 728         All uses updated.
 729         (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
 730         All callers updated.  Fix spelling of DWARF in help text.
 731         (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
 732         All uses updated.
 733         (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
 734         All uses updated.
 735         (set_dwarf_cmd): Renamed from set_dwarf2_cmd.  All callers updated.
 736         (show_dwarf_cmd): Renamed from show_dwarf2_cmd.  All callers updated.
 737         (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
 738         All uses updated.
 739         (show_dwarf_always_disassemble): Renamed from
 740         show_dwarf2_always_disassemble.  All callers updated.
 741         (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
 742         "set/show dwarf".  Rename "set/show dwarf2 max-cache-age" to
 743         "set/show dwarf max-cache-age".  Rename
 744         "set/show dwarf2 always-disassemble" to
 745         "set/show dwarf always-disassemble".  Rename
 746         "set/show debug dwarf2-read" to "set/show debug dwarf-read".  Rename
 747         "set/show debug dwarf2-die" to "set/show debug dwarf-die".
 748
 749 2015-05-26  Doug Evans  <dje@google.com>
 750
 751         PR python/18438
 752         * python/py-lazy-string.c (stpy_convert_to_value): Use
 753         gdbpy_gdb_memory_error not PyExc_MemoryError.
 754         (gdbpy_create_lazy_string_object): Ditto.
 755
 756 2015-05-26  Andrew Burgess  <andrew.burgess@embecosm.com>
 757
 758         * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
 759
 760 2015-05-26  Andrew Burgess  <andrew.burgess@embecosm.com>
 761
 762         * tui/tui-regs.c (tui_reg_prev_command): New function.
 763         (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
 764         * reggroups.c (reggroup_prev): New function.
 765         * reggroups.h (reggroup_prev): Add declaration.  Update comment.
 766
 767 2015-05-26  Omair Javaid  <omair.javaid@linaro.org>
 768             Yao Qi  <yao.qi@linaro.org>
 769
 770         * aarch64-linux-tdep.c: Include linux-record.h and
 771         record-full.h.
 772         (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
 773         (aarch64_syscall): New enum.
 774         (aarch64_canonicalize_syscall): New function.
 775         (aarch64_all_but_pc_registers_record): New function.
 776         (aarch64_linux_syscall_record): New function.
 777         (aarch64_linux_init_abi): Install AArch64 process record
 778         handler.  Update to handle syscall recording.
 779         * aarch64-tdep.c: Include record.h and record-full.h.
 780         (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
 781         (struct aarch64_mem_r): Define.
 782         (aarch64_record_result): New enum.
 783         (struct insn_decode_record): Define.
 784         (insn_decode_record): New typedef.
 785         (aarch64_record_data_proc_reg): New function.
 786         (aarch64_record_data_proc_imm): New function.
 787         (aarch64_record_branch_except_sys): New function.
 788         (aarch64_record_load_store): New function.
 789         (aarch64_record_data_proc_simd_fp): New function.
 790         (aarch64_record_asimd_load_store): New function.
 791         (aarch64_record_decode_insn_handler): New function.
 792         (deallocate_reg_mem): New function.
 793         (aarch64_process_record): New function.
 794         * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
 795         New field.
 796         (aarch64_process_record): New extern declaration.
 797         * configure.tgt: Add linux-record.o to gdb_target_obs.
 798         * linux-record.h (struct linux_record_tdep) <arg7>: New field.
 799
 800 2015-05-26  Omair Javaid  <omair.javaid@linaro.org>
 801
 802         * NEWS: Add a note on process record-replay support on aarch64*-linux*
 803         targets.
 804
 805 2015-05-26  Martin Galvan  <martin.galvan@tallertechnologies.com>
 806
 807         * amd64-tdep.c: Replace in_function_epilogue_p with
 808         stack_frame_destroyed_p throughout.
 809         * arch-utils.c: Ditto.
 810         * arch-utils.h: Ditto.
 811         * arm-tdep.c: Ditto.
 812         * breakpoint.c: Ditto.
 813         * gdbarch.sh: Ditto.
 814         * hppa-tdep.c: Ditto.
 815         * i386-tdep.c: Ditto.
 816         * mips-tdep.c: Ditto.
 817         * nios2-tdep.c: Ditto.
 818         * rs6000-tdep.c: Ditto.
 819         * s390-linux-tdep.c: Ditto.
 820         * score-tdep.c: Ditto.
 821         * sh-tdep.c: Ditto.
 822         * sparc-tdep.c: Ditto.
 823         * sparc-tdep.h: Ditto.
 824         * sparc64-tdep.c: Ditto.
 825         * spu-tdep.c: Ditto.
 826         * tic6x-tdep.c: Ditto.
 827         * tilegx-tdep.c: Ditto.
 828         * xstormy16-tdep.c: Ditto.
 829         * gdbarch.c, gdbarch.h: Re-generated.
 830
 831 2015-05-22  Andrew Burgess  <andrew.burgess@embecosm.com>
 832
 833         * NEWS: Mention 'tui enable' and 'tui disable'.
 834         * tui/tui.c (tui_enable_command): New function.
 835         (tui_disable_command): New function.
 836         (_initialize_tui): New function.
 837
 838 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 839
 840         * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
 841
 842 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 843
 844         * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
 845         buf_ptr is freed.
 846
 847 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 848
 849         * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
 850         into ...
 851         (tui_set_layout_for_display_command): ...here, before calling
 852         tui_set_layout.  Only set the layout if gdb has not already
 853         entered the TUI_FAILURE state.
 854
 855 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 856
 857         * tui/tui-layout.c (layout_completer): New function.
 858         (_initialize_tui_layout): Set completer on layout command.
 859
 860 2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>
 861
 862         * tui/tui-layout.c (tui_set_layout): Remove
 863         tui_register_display_type parameter.  Remove all checking of this
 864         parameter, and reindent function.  Update header comment.
 865         (tui_set_layout_for_display_command): Rename to...
 866         (tui_set_layout_by_name): ...this, and don't check for different
 867         register class types, don't pass a tui_register_display_type to
 868         tui_set_layout.  Update header comment.
 869         (layout_names): Remove register set specific names.
 870         * tui/tui-layout.h (tui_set_layout): Remove
 871         tui_register_display_type parameter.
 872         * tui/tui.c (tui_rl_change_windows): Don't pass a
 873         tui_register_display_type to tui_set_layout.
 874         (tui_rl_delete_other_windows): Likewise.
 875         (tui_enable): Likewise.
 876         * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
 877         (TUI_FLOAT_REGS_NAME_LOWER): Remove.
 878         (TUI_GENERAL_REGS_NAME): Remove.
 879         (TUI_GENERAL_REGS_NAME_LOWER): Remove.
 880         (TUI_SPECIAL_REGS_NAME): Remove.
 881         (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
 882         (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
 883         (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
 884         (enum tui_register_display_type): Remove.
 885         (struct tui_layout_def): Remove regs_display_type and
 886         float_regs_display_type fields.
 887         (struct tui_data_info): Remove regs_display_type field.
 888         (tui_layout_command): Use new name for
 889         tui_set_layout_for_display_command.
 890         * tui/tui-data.c (layout_def): Don't initialise removed fields.
 891         (tui_clear_win_detail): Don't initialise removed fields of
 892         win_info.
 893         * tui/tui-regs.c (tui_show_registers): Use new name for
 894         tui_set_layout_for_display_command.
 895         * tui/tui.h (tui_set_layout_for_display_command): Rename
 896         declaration to...
 897         (tui_set_layout_by_name): ...this.
 898         * printcmd.c (display_command): Remove tui related layout call,
 899         and reindent.
 900
 901 2015-05-20  Joel Brobecker  <brobecker@adacore.com>
 902
 903         * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
 904         (handle_inferior_event): New function.
 905
 906 2015-05-20  Joel Brobecker  <brobecker@adacore.com>
 907
 908         * ada-lang.c (to_fixed_array_type): Rename local variable
 909         typename into type_name.
 910
 911 2015-05-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
 912
 913         Fix ASAN crash for gdb.compile/compile.exp.
 914         * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
 915
 916 2015-05-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
 917
 918         * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
 919         (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
 920         * compile/compile-object-load.c (setup_sections, compile_object_load):
 921         Likewise.
 922         * compile/compile.c (compile_to_object): Likewise.
 923
 924 2015-05-16  Doug Evans  <xdje42@gmail.com>
 925
 926         * NEWS: Mention support for unbuffered Guile memory ports.
 927         * scm-ports.c (ioscm_memory_port): Update comments on end, size.
 928         (ioscm_lseek_address): Improve overflow calculation.
 929         (gdbscm_memory_port_fill_input): Add assert.
 930         (gdbscm_memory_port_write): Handle unbuffered ports.
 931         Handle large writes identical to Guile's fport_write.
 932         (gdbscm_memory_port_seek): Fix seeking past end check.
 933         (gdbscm_memory_port_close): Handle closing unbuffered port.
 934         (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
 935         (ioscm_init_memory_port): Handle unbuffered ports.
 936         (ioscm_reinit_memory_port): Ditto.
 937         (ioscm_init_memory_port): Update size calculation.
 938         (gdbscm_open_memory): Support zero sized ports.
 939
 940 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 941
 942         * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
 943         variable compiler warnings.
 944
 945 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 946
 947         * compile/compile-object-load.c (get_out_value_type): Fix returned type.
 948
 949 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 950             Phil Muldoon  <pmuldoon@redhat.com>
 951
 952         * NEWS (Changes since GDB 7.9): Add compile print.
 953         * compile/compile-c-support.c (add_code_header, add_code_footer)
 954         (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
 955         COMPILE_I_PRINT_VALUE_SCOPE.
 956         * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
 957         (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
 958         New.
 959         * compile/compile-object-load.c: Include block.h.
 960         (get_out_value_type): New function.
 961         (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
 962         COMPILE_I_PRINT_VALUE_SCOPE.  Set compile_module's OUT_VALUE_ADDR and
 963         OUT_VALUE_TYPE.
 964         * compile/compile-object-load.h (struct compile_module): Add fields
 965         out_value_addr and out_value_type.
 966         * compile/compile-object-run.c: Include valprint.h and compile.h.
 967         (struct do_module_cleanup): Add fields out_value_addr and
 968         out_value_type.
 969         (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
 970         COMPILE_I_PRINT_VALUE_SCOPE.
 971         (compile_object_run): Propagate out_value_addr and out_value_type.
 972         Pass OUT_VALUE_ADDR.
 973         * compile/compile.c: Include valprint.h.
 974         (compile_print_value, compile_print_command): New functions.
 975         (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
 976         (_initialize_compile): Update compile code help text.  Install
 977         compile_print_command.
 978         * compile/compile.h (compile_print_value): New prototype.
 979         * defs.h (enum compile_i_scope_types): Add
 980         COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
 981
 982 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 983
 984         * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
 985         Rely on its parameter count.
 986         (compile_object_load): Replace lookup_minimal_symbol_text by
 987         lookup_global_symbol_from_objfile.  Verify FUNC_SYM.  Set it in the
 988         return value.
 989         * compile/compile-object-load.h (struct compile_module): Replace
 990         func_addr by func_sym.
 991         * compile/compile-object-run.c: Include block.h.
 992         (compile_object_run): Reset module variable after it is freed.  Use
 993         FUNC_SYM instead of FUNC_ADDR.  Rely on it.
 994
 995 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 996
 997         * compile/compile-c-support.c (print_one_macro): Use #ifndef.
 998         (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
 999         (c_compute_program): Call generate_register_struct after typedefs.
1000         * compile/compile-loc2c.c (push, pushf_register_address)
1001         (pushf_register): Cast to GCC_UINTPTR.
1002         (do_compile_dwarf_expr_to_c): Use unused attribute.  Add space after
1003         type.  Use GCC_UINTPTR instead of void *.  Remove excessive cast.
1004         (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
1005         * compile/compile.c (_initialize_compile): Enable warnings for
1006         COMPILE_ARGS.
1007
1008 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1009
1010         * cli/cli-script.c (execute_control_command): Update
1011         eval_compile_command caller.
1012         * compile/compile-object-load.c (compile_object_load): Add parameters
1013         scope and scope_data.  Set them.
1014         * compile/compile-object-load.h (struct compile_module): Add fields
1015         scope and scope_data.
1016         (compile_object_load): Add parameters scope and scope_data.
1017         * compile/compile-object-run.c (struct do_module_cleanup): Add fields
1018         scope and scope_data.
1019         (compile_object_run): Propagate the fields scope and scope_data.
1020         * compile/compile.c (compile_file_command, compile_code_command):
1021         Update eval_compile_command callers.
1022         (eval_compile_command): Add parameter scope_data.  Pass it plus scope.
1023         * compile/compile.h (eval_compile_command): Add parameter scope_data.
1024         * defs.h (struct command_line): Add field scope_data.
1025
1026 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1027
1028         * printcmd.c (struct format_data): Move it to valprint.h.
1029         (print_command_parse_format, print_value): New functions from ...
1030         (print_command_1): ... here.  Call them.
1031         * valprint.h (struct format_data): Move it here from printcmd.c.
1032         (print_command_parse_format, print_value): New declarations.
1033
1034 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1035
1036         * compile/compile-object-load.c (compile_object_load): Add
1037         COMPILE_DEBUG message.
1038
1039 2015-05-15  Jerome Guitton  <guitton@adacore.com>
1040
1041         * ada-lang.c (ada_value_ptr_subscript): Use enum position of
1042         index to get element instead of enum value.
1043         (ada_value_slice_from_ptr, ada_value_slice): Use enum position
1044         of index to compute length, but enum values to compute bounds.
1045         (ada_array_length): Use enum position of index instead of enum value.
1046         (pos_atr): Move position computation to...
1047         (ada_evaluate_subexp): Use enum values to compute bounds.
1048         * gdbtypes.c (discrete_position): ...this new function.
1049         * gdbtypes.h (discrete_position): New function declaration.
1050         * valprint.c (val_print_array_elements): Call discrete_position
1051         to handle array indexed by non-contiguous enumeration types.
1052
1053 2015-05-15  Jerome Guitton  <guitton@adacore.com>
1054
1055         * ada-lang.c (find_parallel_type_by_descriptive_type):
1056         Go through typedefs during lookup.
1057         (to_fixed_array_type): Add support for non-bit packed arrays
1058         as variable-length fields.
1059
1060 2015-05-15  Pedro Alves  <palves@redhat.com>
1061             Simon Marchi  <simon.marchi@ericsson.com>
1062
1063         * event-loop.c (gdb_notifier) <next_file_handler,
1064         next_poll_fds_index>: New fields.
1065         (get_next_file_handler_to_handle_and_advance): New function.
1066         (delete_file_handler): If deleting the next file handler to
1067         handle, advance to the next file handler.
1068         (gdb_wait_for_event): Bail early if no event fired.  Poll file
1069         handlers in round-robin fashion.
1070
1071 2015-05-15  Pedro Alves  <palves@redhat.com>
1072
1073         * linux-tdep.c (linux_find_memory_regions_full): Rename local
1074         'private' to 'priv'.
1075
1076 2015-05-15  Pedro Alves  <palves@redhat.com>
1077
1078         * nat/linux-nat.h: Include "target/waitstatus.h".
1079
1080 2015-05-15  Yuanhui Zhang  <asmwarrior@gmail.com>
1081
1082         * python/py-unwind.c (struct reg_info): Move out of ...
1083         (struct cached_frame_info): ... this scope.
1084         (pending_frame_object_type, unwind_info_object_type): Make extern.
1085
1086 2015-05-15  Joel Brobecker  <brobecker@adacore.com>
1087
1088         * ada-lang.c (ada_value_primitive_packed_val): Make sure
1089         accumSize is never negative.
1090
1091 2015-05-14  Patrick Palka  <patrick@parcs.ath.cx>
1092
1093         * tui/tui-command.c: Remove include of <ctype.h>.
1094         (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
1095
1096 2015-05-13  Martin Galvan  <martin.galvan@tallertechnologies.com>
1097
1098         * dwarf2read.c (die_needs_namespace): Return 1 for
1099         DW_TAG_inlined_subroutine.
1100
1101 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1102
1103         * regcache.c (regcache_cpy_no_passthrough): New declaration.
1104         (regcache_cpy_no_passthrough): Make it static, add function comment.
1105         * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
1106         (regcache_cpy_no_passthrough): Remove declaration.
1107
1108 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1109
1110         * gdbthread.h (struct thread_control_state): Update comment for
1111         proceed_to_finish.
1112         * infcall.c (run_inferior_call): Update comment about
1113         proceed_to_finish.
1114         * infcmd.c (get_return_value): Update comment about stop_registers.
1115         (finish_forward): Update comment about proceed_to_finish.
1116         * infrun.c (stop_registers): Remove.
1117         (clear_proceed_status, normal_stop): Remove stop_registers handling.
1118         * infrun.h (stop_registers): Remove.
1119
1120 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1121
1122         * infcall.c (struct dummy_frame_context_saver)
1123         (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
1124         (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1125         (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1126         New.
1127         (call_function_by_hand_dummy): Move discard_cleanups of
1128         inf_status_cleanup before dummy_frame_push.  Call
1129         dummy_frame_context_saver_setup and prepare context_saver_cleanup.
1130         Use dummy_frame_context_saver_get_regs instead of stop_registers.
1131         * infcall.h (struct dummy_frame_context_saver)
1132         (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1133         (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1134         New declarations.
1135         * infcmd.c: Include infcall.h.
1136         (get_return_value): Add parameter ctx_saver, use it instead of
1137         stop_registers.
1138         (print_return_value): Add parameter ctx_saver, pass it.
1139         (struct finish_command_continuation_args): Add field ctx_saver.
1140         (finish_command_continuation): Update print_return_value caller.
1141         (finish_command_continuation_free_arg): Free also ctx_saver.
1142         (finish_forward): Call dummy_frame_context_saver_setup.
1143         * inferior.h (struct dummy_frame_context_saver): New declaration.
1144         (get_return_value): Add parameter ctx_saver.
1145         * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
1146         get_return_value caller.
1147
1148 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1149
1150         * dummy-frame.c (struct dummy_frame_dtor_list): New.
1151         (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
1152         (remove_dummy_frame): Process dtor_list.
1153         (pop_dummy_frame): Process dtor_list.
1154         (register_dummy_frame_dtor): Maintain dtor_list.
1155         (find_dummy_frame_dtor): Handle dtor_list.
1156         * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
1157         Update comments.
1158
1159 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1160
1161         * compile/compile-object-run.c (do_module_cleanup): Add parameter
1162         registers_valid.
1163         (compile_object_run): Update do_module_cleanup caller.
1164         * dummy-frame.c: Include infcall.h.
1165         (struct dummy_frame): Update dtor comment.
1166         (remove_dummy_frame): Call dtor.
1167         (pop_dummy_frame): Update dtor caller.
1168         * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
1169         registers_valid.
1170
1171 2015-05-13  Joel Brobecker  <brobecker@adacore.com>
1172
1173         GDB 7.9.1 released.
1174
1175 2015-05-13  Joel Brobecker  <brobecker@adacore.com>
1176
1177         * NEWS: Create "Changes in GDB 7.9.1" section.  Move news about
1178         Xmethods now being able to specify a result type to that new
1179         sectioin.
1180
1181 2015-05-13  Patrick Palka  <patrick@parcs.ath.cx>
1182
1183         * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
1184         first before resizing the window.
1185         * tui/tui.c (tui_enable): Likewise.
1186
1187 2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1188
1189         * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
1190         * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
1191         * infcall.c (call_function_by_hand_dummy): Use proper typedef for
1192         dummy_dtor parameter.
1193         * infcall.h: Include dummy-frame.h.
1194         (call_function_by_hand_dummy_dtor_ftype): Remove.
1195         (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
1196         parameter.
1197
1198 2015-05-13  Patrick Palka  <patrick@parcs.ath.cx>
1199
1200         PR gdb/17820
1201         * top.c (history_size_setshow_var): Change type to signed.
1202         Initialize to -2.  Update documentation.
1203         (set_readline_history_size): Define.
1204         (set_history_size_command): Use it.  Remove logic for handling
1205         out-of-range sizes.
1206         (init_history): Use set_readline_history_size().  Test for a
1207         value of -2 instead of 0 when determining whether to set a
1208         default history size.
1209         (init_main): Decode the argument of the "size" command as a
1210         zuinteger_unlimited.
1211
1212 2015-05-12  Doug Evans  <dje@google.com>
1213
1214         * dwarf2read.c (struct file_entry): Tweak comments.
1215         (get_debug_line_section): Tweak comments.
1216
1217 2015-05-12  Don Breazeal  <donb@codesourcery.com>
1218
1219         * NEWS: Announce fork support in the RSP and support
1220         for fork debugging in extended mode.
1221
1222 2015-05-12  Don Breazeal  <donb@codesourcery.com>
1223
1224         * remote.c (remote_insert_fork_catchpoint): New function.
1225         (remote_remove_fork_catchpoint): New function.
1226         (remote_insert_vfork_catchpoint): New function.
1227         (remote_remove_vfork_catchpoint): New function.
1228         (pending_fork_parent_callback): New function.
1229         (remove_new_fork_child): New function.
1230         (remote_update_thread_list): Call remote_notif_get_pending_events
1231         and remove_new_fork_child.
1232         (extended_remote_kill): Kill fork child when killing the
1233         parent before follow_fork completes.
1234         (init_extended_remote_ops): Initialize target vector with
1235         new fork catchpoint functions.
1236
1237 2015-05-12  Don Breazeal  <donb@codesourcery.com>
1238
1239         * remote.c (remove_vfork_event_p): New function.
1240         (remote_follow_fork): Add vfork event type to event checking.
1241         (remote_parse_stop_reply): New stop reasons "vfork" and
1242         "vforkdone" for RSP 'T' Stop Reply Packet.
1243
1244 2015-05-12  Don Breazeal  <donb@codesourcery.com>
1245
1246         * linux-nat.c (linux_nat_ptrace_options): New function.
1247         (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
1248         Call linux_nat_ptrace_options and use different argument to
1249         linux_enable_event_reporting.
1250         (_initialize_linux_nat): Delete call to
1251         linux_ptrace_set_additional_flags.
1252         * nat/linux-ptrace.c (current_ptrace_options): Rename to
1253         supported_ptrace_options.
1254         (additional_flags): Delete variable.
1255         (linux_check_ptrace_features): Use supported_ptrace_options.
1256         (linux_test_for_tracesysgood, linux_test_for_tracefork):
1257         Likewise, and remove additional_flags check.
1258         (linux_enable_event_reporting): Change 'attached' argument to
1259         'options'.  Use supported_ptrace_options.
1260         (ptrace_supports_feature): Change comment.  Use
1261         supported_ptrace_options.
1262         (linux_ptrace_set_additional_flags): Delete function.
1263         * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
1264         Delete function prototype.
1265         * remote.c (remote_fork_event_p): New function.
1266         (remote_detach_pid): New function.
1267         (remote_detach_1): Call remote_detach_pid, don't mourn inferior
1268         if doing detach-on-fork.
1269         (remote_follow_fork): New function.
1270         (remote_parse_stop_reply): Handle new "T" stop reason "fork".
1271         (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
1272         (init_extended_remote_ops): Initialize to_follow_fork.
1273
1274 2015-05-12  Don Breazeal  <donb@codesourcery.com>
1275
1276         * nat/linux-ptrace.c (linux_check_ptrace_features): Change
1277         from static to extern.
1278         * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
1279         * remote.c (anonymous enum): <PACKET_fork_event_feature,
1280         * PACKET_vfork_event_feature>: New enumeration constants.
1281         (remote_protocol_features): Add table entries for new packets.
1282         (remote_query_supported): Add new feature queries to qSupported
1283         packet.
1284
1285 2015-05-12  Gary Benson <gbenson@redhat.com>
1286
1287         * remote.c (remote_add_inferior): Call exec_file_locate_attach
1288         for fake PIDs as well as real ones.
1289         (remote_pid_to_exec_file): Send empty annex if PID is fake.
1290
1291 2015-05-09  Siva Chandra Reddy  <sivachandra@google.com>
1292
1293         * NEWS (Python Scripting): Mention the new gdb.Value methods.
1294         * python/py-value.c (valpy_reference_value): New function.
1295         (valpy_const_value): Likewise.
1296         (value_object_methods): Add new methods.
1297         * value.c (make_cv_value): New function.
1298         * value.h (make_cv_value): Declare.
1299
1300 2015-05-08  Yao Qi  <yao@codesourcery.com>
1301             Sandra Loosemore  <sandra@codesourcery.com>
1302
1303         * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
1304         to 'lh->include_dirs' before accessing to it.
1305         (psymtab_include_file_name): Likewise.
1306         (dwarf_decode_lines_1): Likewise.
1307         (dwarf_decode_lines): Likewise.
1308         (file_file_name): Likewise.
1309
1310 2015-05-08  Sandra Loosemore  <sandra@codesourcery.com>
1311
1312         * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
1313         (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
1314         (nios2_linux_rt_sigreturn_init): Adjust base address of
1315         register save area.
1316
1317 2015-05-08  Sandra Loosemore  <sandra@codesourcery.com>
1318
1319         * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
1320         "trap 31" as the breakpoint instruction on all targets.
1321
1322 2015-05-08  Jan Kratochvil  <jan.kratochvil@redhat.com>
1323
1324         * infcmd.c (print_return_value): Remove unused declaration.
1325
1326 2015-05-08  Joel Brobecker  <brobecker@adacore.com>
1327
1328         * dwarf2read.c (attr_to_dynamic_prop)
1329         <DW_AT_data_member_location>: Use read_type_die isntead of
1330         get_die_type.
1331
1332 2015-05-08  Joel Brobecker  <brobecker@adacore.com>
1333
1334         * ada-lang.c (ada_convert_actual): Add handling of formals
1335         passed inside an aligner type.
1336
1337 2015-05-08  Joel Brobecker  <brobecker@adacore.com>
1338
1339         * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
1340
1341 2015-05-08  Siva Chandra Reddy  <sivachandra@google.com>
1342
1343         PR python/18291
1344         * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
1345         Print xmethod matcher status.
1346
1347 2015-05-08  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1348
1349         * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
1350         register in the regcache when treating the PSWM register, and vice
1351         versa.
1352
1353 2015-05-07  Gary Benson <gbenson@redhat.com>
1354
1355         * linux-thread-db.c (struct thread_db_info)
1356         <td_ta_map_id2thr_p>: Remove field.
1357         (try_thread_db_load_1): Remove initialization for the above.
1358
1359 2015-05-07  Gary Benson <gbenson@redhat.com>
1360
1361         * linux-thread-db.c (struct thread_db_info)
1362         <td_thr_validate_p>: Remove field.
1363         (try_thread_db_load_1): Remove initialization for the above.
1364
1365 2015-05-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
1366
1367         * compile/compile-object-load.c (compile_object_load): Support
1368         mst_text_gnu_ifunc.
1369
1370 2015-05-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
1371
1372         * compile/compile.c (compile_to_object): Make the cmd_string parameter
1373         const.  Use new variables for the const compatibility.
1374         (eval_compile_command): Make the cmd_string parameter const.
1375         * compile/compile.h (eval_compile_command): Make the cmd_string
1376         parameter const.
1377
1378 2015-05-06  Joel Brobecker  <brobecker@adacore.com>
1379
1380         * defs.h (deprecated_init_ui_hook): Delete.  Remove associated
1381         comment.
1382         * top.c (deprecated_init_ui_hook): Delete.
1383         (gdb_init): Remove handling of deprecated_init_ui_hook.
1384         * interps.c (clear_interpreter_hooks): Remove handling of
1385         deprecated_init_ui_hook.
1386         * main.c (captured_main): Update comment.
1387
1388 2015-05-06  Joel Brobecker  <brobecker@adacore.com>
1389
1390         * solib.c (_initialize_solib): Add "info dll" alias creation.
1391         * windows-nat.c (set_windows_aliases): Delete.
1392         (_initialize_windows_nat): Remove deprecated_init_ui_hook
1393         assignment.
1394         * NEWS: Add news entry about "info dll" now being available
1395         on all platforms.
1396
1397 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1398
1399         * ada-lang.c (value_assign_to_component): Reformat and improve
1400         documentation. Remove all trailing spaces.
1401
1402 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1403
1404         * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
1405         Stop counting inlined frames as soon as an out-of-line function
1406         is found.
1407
1408 2014-05-05  Pierre-Marie de Rodat  <derodat@adacore.com>
1409
1410         * dwarf2read.c (inherit_abstract_dies): Skip
1411         DW_TAG_GNU_call_site dies while inheriting children of an
1412         abstract DIE into a scope.
1413         (read_lexical_block_scope): Inherit abstract DIE's for
1414         lexical scopes.
1415
1416 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1417
1418         * ada-valprint.c (val_print_packed_array_elements): Delete
1419         variable "len".  Add a type-length check when comparing two
1420         consecutive elements of the array.  Use the element's actual
1421         length in call to value_contents_eq.
1422         * ada-lang.c (ada_value_primitive_packed_val): Always return
1423         a value whose type has been resolved.
1424
1425 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1426
1427         * ada-lang.c (ada_value_primitive_packed_val): Recompute
1428         BIT_SIZE and LEN if the size of the resolved type is smaller
1429         than BIT_SIZE * HOST_CHAR_BIT.
1430
1431 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1432
1433         * ada-lang.c (ada_value_primitive_packed_val): Use a more
1434         correct address in call to value_at.  Adjust call to
1435         value_address accordingly.
1436
1437 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1438
1439         * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
1440         to print it.
1441
1442 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1443
1444         * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
1445         * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
1446         pinfo->valaddr.
1447         * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
1448         * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
1449         (resolve_dynamic_type_internal): Set pinfo.valaddr.
1450         Add handling of addr_stack->valaddr.
1451         (resolve_dynamic_type): Add "valaddr" parameter.
1452         Set pinfo.valaddr field.
1453         * ada-lang.c (ada_discrete_type_high_bound): Update call to
1454         resolve_dynamic_type.
1455         (ada_discrete_type_low_bound): Likewise.
1456         * findvar.c (default_read_var_value): Likewise.
1457         * value.c (value_from_contents_and_address): Likewise.
1458
1459 2015-05-05  Joel Brobecker  <brobecker@adacore.com>
1460
1461         * gdbtypes.c (resolve_dynamic_array): Use
1462         create_array_type_with_stride instead of create_array_type.
1463
1464 2015-04-30  DJ Delorie  <dj@redhat.com>
1465
1466         * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
1467         rl78_decode_opcode
1468
1469 2015-04-29  Doug Evans  <dje@google.com>
1470
1471         PR python/18285
1472         * NEWS: Document new gdb.XMethodWorker.get_result_type method.
1473         * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
1474         EVAL_AVOID_SIDE_EFFECTS for xmethods.
1475         * extension-priv.h (struct extension_language_ops)
1476         <get_xmethod_result_type>: New member.
1477         * extension.c (get_xmethod_result_type): New function.
1478         * extension.h (get_xmethod_result_type): Declare.
1479         * python/py-xmethods.c (get_result_type_method_name): New static
1480         global.
1481         (py_get_result_type_method_name): Ditto.
1482         (gdbpy_get_xmethod_result_type): New function.
1483         (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
1484         * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
1485         * python/python.c (python_extension_ops): Add
1486         gdbpy_get_xmethod_result_type.
1487         * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
1488         * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
1489         xmethods.
1490         (value_x_unop): Ditto.
1491         * value.c (result_type_of_xmethod): New function.
1492         * value.h (result_type_of_xmethod): Declare.
1493
1494 2015-04-29  Gary Benson <gbenson@redhat.com>
1495
1496         * solib.c (solib_find_1): Allow fd argument to be NULL.
1497         (exec_file_find): Update comment.
1498         (solib_find): Likewise.
1499         * exec.c (exec_file_locate_attach): Use NULL as fd
1500         argument to exec_file_find to avoid having to close
1501         the opened file.
1502         * infrun.c (follow_exec): Likewise.
1503
1504 2015-04-28  Doug Evans  <dje@google.com>
1505
1506         PR python/18299
1507         * python/lib/gdb/printing.py (register_pretty_printer): Handle
1508         name or __name__ attributes.  Handle gdb module as first argument.
1509
1510 2015-04-28  Doug Evans  <dje@google.com>
1511
1512         PR python/18089
1513         * python/py-prettyprint.c (print_children): Verify result of children
1514         iterator.  Provide better error message.
1515         * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
1516         * python/python.c (gdbpy_print_python_errors_p): New function.
1517
1518 2015-04-28  Doug Evans  <dje@google.com>
1519
1520         * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
1521
1522 2015-04-28  Sasha Smundak  <asmundak@google.com>
1523
1524         * NEWS: Mention gdb.Type.optimized_out method.
1525         * python/py-type.c (typy_optimized_out):  New function.
1526
1527 2015-04-28  John Baldwin  <jhb@FreeBSD.org>
1528
1529         * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
1530
1531 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1532
1533         * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
1534         (initialize_utils): Move call of init_page_info() to ...
1535         * top.c (gdb_init): ... here.
1536
1537 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1538
1539         * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
1540         (tui_sigwinch_handler): Still update our idea of
1541         the terminal's width and height even when TUI is not active.
1542
1543 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1544
1545         * utils.h (set_screen_width_and_height): Declare.
1546         * utils.c (set_screen_width_and_height): Define.
1547         * tui/tui-win.c (tui_update_gdb_sizes): Use it.
1548
1549 2015-04-28  Gary Benson <gbenson@redhat.com>
1550
1551         * infrun.c (solist.h): New include.
1552         (follow_exec): Use exec_file_find to prefix execd_pathname
1553         with gdb_sysroot.
1554
1555 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1556
1557         * tui/tui-source.c (tui_set_source_content): Avoid calling
1558         strcpy() when offset is 0.
1559
1560 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1561
1562         PR gdb/18155
1563         * tui/tui-data.c (tui_free_window): Don't free the locator
1564         window when passed an SRC_WIN or a DISASSEM_WIN.
1565
1566 2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>
1567
1568         * tui/tui-data.h (struct tui_win_element): Forward-declare.
1569         (tui_win_content): Move declaration.
1570         (struct tui_gen_win_info): Give 'content' field the
1571         type tui_win_content.
1572         * tui/tui-data.c (init_content_element): Remove redundant and
1573         erroneous casts.
1574         (tui_add_content_elements): Remove erroneous cast.
1575         * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
1576         casts.
1577         (tui_get_begin_asm_address): Likewise.
1578         * tui/tui-regs.c (tui_show_registers): Likewise.
1579         (tui_show_register_group): Likewise.
1580         (tui_display_registers_from): Likewise.
1581         (tui_check_register_values): Likewise.
1582         * tui/tui-source.c (tui_set_source_content): Likewise.
1583         (tui_set_source_content_nil): Likewise.
1584         (tui_source_is_displayed): Likewise.
1585         * tui/tui-stack.c (tui_show_locator_content): Likewise.
1586         (tui_set_locator_fullname): Likewise.
1587         (tui_set_locator_info): Likewise.
1588         (tui_show_frame_info): Likewise.
1589         * tui/tui-winsource.c (tui_clear_source_content): Likewise.
1590         (tui_show_source_line): Likewise.
1591         (tui_horizontal_source_scroll): Likewise.
1592         (tui_update_breakpoint_info): Likewise.
1593         (tui_set_exec_info_content): Likewise.
1594         (tui_show_exec_info_content): Likewise.
1595         (tui_alloc_source_buffer): Likewise.
1596         (tui_line_is_displayed): Likewise.
1597         (tui_addr_is_displayed): Likewise.
1598
1599 2015-04-27  John Baldwin  <jhb@FreeBSD.org>
1600
1601         * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
1602         event if PL_FLAG_EXEC is set.
1603         [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
1604         [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
1605         (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
1606         "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
1607         Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
1608
1609 2015-04-27  John Baldwin  <jhb@FreeBSD.org>
1610
1611         * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
1612         [TDP_RFPPWAIT] New variable fbsd_pending_children.
1613         [TDP_RFPPWAIT] (fbsd_remember_child): New function.
1614         [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
1615         [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
1616         [PT_LWPINFO] (fbsd_wait): New function.
1617         [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
1618         [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
1619         [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
1620         [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
1621         [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
1622         [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
1623         [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
1624         [TDP_RFPPWAIT] (fbsd_post_attach): New function.
1625         (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
1626         "fbsd_wait".
1627         [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
1628         Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
1629         Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
1630         Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
1631         Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
1632         Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
1633         Set "to_post_attach" to "fbsd_post_attach".
1634
1635 2015-04-27  John Baldwin  <jhb@FreeBSD.org>
1636
1637         * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
1638         (fbsd_find_memory_regions): Mark static.
1639         (fbsd_nat_add_target): New function.
1640         * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
1641         fbsd_pid_to_exec_file and fbsd_find_memory_regions.
1642         * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
1643         * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
1644         * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
1645         * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
1646
1647 2015-04-27  Gary Benson <gbenson@redhat.com>
1648
1649         * objfiles.c (allocate_objfile): Do not attempt to expand name
1650         if name is a "target:" filename.
1651         * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
1652         to load auto-load scripts for objfiles with "target:" filenames.
1653
1654 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1655
1656         * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
1657         (enum s390_vector_abi_kind): New enum.
1658         (struct gdbarch_tdep)<vector_abi>: New field.
1659         (s390_effective_inner_type): Add parameter min_size.  Stop
1660         unwrapping if the inner type is smaller than min_size.
1661         (s390_function_arg_float): Adjust call to
1662         s390_effective_inner_type.
1663         (s390_function_arg_vector): New function.
1664         (s390_function_arg_integer): Adjust comment.
1665         (struct s390_arg_state)<vr>: New field.
1666         (s390_handle_arg): Add parameter 'is_unnamed'.  Pass vector
1667         arguments according to vector ABI when appropriate.
1668         (s390_push_dummy_call): Initialize the argument state's field
1669         'vr'.  Adjust calls to s390_handle_arg.
1670         (s390_register_return_value): Handle vector return values.
1671         (s390_return_value): Apply the "register" return value convention
1672         to a vector when appropriate.
1673         (s390_gdbarch_init): Initialize tdep->vector_abi.
1674         * NEWS: Announce S390 vector ABI support.
1675
1676 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1677
1678         * s390-linux-tdep.c (s390_return_value_convention): Remove
1679         function.  Inline its logic...
1680         (s390_return_value): ...here.  Instead, move the handling of the
1681         "register" return value convention...
1682         (s390_register_return_value): ...here.  New function.
1683
1684 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1685
1686         * s390-linux-tdep.c
1687         (is_float_singleton): Remove function.  Move the "singleton" part
1688         of the logic...
1689         (s390_effective_inner_type): ...here.  New function.
1690         (is_float_like): Remove function.  Inline its logic...
1691         (s390_function_arg_float): ...here.
1692         (is_pointer_like, is_integer_like, is_struct_like): Remove
1693         functions.  Inline their logic...
1694         (s390_function_arg_integer): ...here.
1695         (s390_function_arg_pass_by_reference): Remove function.
1696         (extend_simple_arg): Remove function.
1697         (alignment_of): Remove function.
1698         (struct s390_arg_state): New structure.
1699         (s390_handle_arg): New function.
1700         (s390_push_dummy_call): Move parameter placement logic to the new
1701         function s390_handle_arg.  Call it for calculating the stack area
1702         sizes first, and again for actually writing the parameters.
1703
1704 2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1705
1706         * s390-linux-tdep.c (is_power_of_two): Add comment.  Return
1707           false if the argument is zero.
1708
1709 2015-04-27  Pierre-Marie de Rodat  <derodat@adacore.com>
1710
1711         * ada-lang.c (template_to_static_fixed_type): Return input type
1712         when it is already fixed.  Cache the input type itself when not
1713         creating a static fixed copy.  Make it explicit that we never
1714         molestate the input type.
1715         * gdbtypes.c (resolve_dynamic_struct): Reset the
1716         TYPE_TARGET_TYPE field for resolved copies.
1717
1718 2015-04-27  Joel Brobecker  <brobecker@adacore.com>
1719
1720         * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
1721         (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
1722         (template_to_static_fixed_type): Call ada_check_typedef only
1723         when necessary.
1724
1725 2015-04-24  Andrew Burgess  <andrew.burgess@embecosm.com>
1726
1727         * cli/cli-dump.c (srec_dump_command): Add internationalization
1728         mark ups.
1729         (ihex_dump_command): Likewise.
1730         (tekhex_dump_command): Likewise.
1731         (binary_dump_command): Likewise.
1732         (binary_append_command): Likewise.
1733
1734 2015-04-24  Andrew Burgess  <andrew.burgess@embecosm.com>
1735
1736         * cli/cli-dump.c (verilog_cmdlist): New variable.
1737         (dump_verilog_memory): New function.
1738         (dump_verilog_value): New function.
1739         (verilog_dump_command): New function.
1740         (_initialize_cli_dump): Add new commands to support verilog dump
1741         format.
1742         * NEWS: Add entry for "dump verilog".
1743
1744 2015-04-24  Pierre-Marie de Rodat  <derodat@adacore.com>
1745
1746         * gdbtypes.c (print_gnat_stuff): Do not recurse on the
1747         descriptive type when there is none.
1748
1749 2015-04-23  Patrick Palka  <patrick@parcs.ath.cx>
1750
1751         * tui/tui-win.c (tui_async_resize_screen): Call
1752         rl_resize_terminal().
1753
1754 2015-04-22  Jon Turney  <jon.turney@dronecode.org.uk>
1755
1756         * windows-nat.c (handle_output_debug_string): Don't change
1757         current_event.dwThreadId.
1758         (get_windows_debug_event): Use thread_id, rather than relying on
1759         current_event.dwThreadId being changed.
1760
1761 2015-04-22  Jon Turney  <jon.turney@dronecode.org.uk>
1762
1763         * windows-nat.c (windows_continue): Report an error if
1764         ContinueDebugEvent() fails.
1765
1766 2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>
1767
1768         * windows-nat.c (windows_resume): Fix misspelling in debug output.
1769
1770 2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>
1771
1772         * windows-nat.c (get_windows_debug_event): Replace retval with
1773         thread_id throughout.  Update stale comment.
1774
1775 2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>
1776
1777         * windows-nat.c (get_windows_debug_event): Don't use ternary
1778         conditional operator.
1779
1780 2015-04-21  Pierre Muller  <muller@sourceware.org>
1781
1782         PR pascal/17815
1783         p-exp.y (yylex): Reorganize code to return the matched pattern
1784         for a field of this.
1785
1786 2015-04-21  Gary Benson <gbenson@redhat.com>
1787
1788         * common/fileio.h (fileio_to_host_openflags): New declaration.
1789         * common/fileio.c (fcntl.h): New include.
1790         (fileio_to_host_openflags): New function, factored out from...
1791         * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
1792         Single use updated.
1793
1794 2015-04-21  Kevin Buettner  <kevinb@redhat.com>
1795
1796         * rl78-tdep.c (RL78_SP_ADDR): Define.
1797         (opc_reg_to_gdb_regnum): New static function.
1798         (rl78_analyze_prologue): Recognize instructions forming slightly
1799         more interesting prologues.
1800
1801 2015-04-20  Pierre-Marie de Rodat  <derodat@adacore.com>
1802
1803         Revert:
1804         2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
1805         * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
1806         TYPE_CODE_REF types so that they are not considered as dynamic
1807         depending on the referenced type.
1808         (resolve_dynamic_type_internal): Likewise.
1809
1810 2015-04-20  Pierre-Marie de Rodat  <derodat@adacore.com>
1811
1812         Revert:
1813         2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
1814         * gdbtypes.c (is_dynamic_type_internal): Remove the unused
1815         "top_level" parameter.
1816         (resolve_dynamic_type_internal): Remove the unused "top_level"
1817         parameter.  Update call to is_dynamic_type_internal.
1818         (is_dynamic_type): Update call to is_dynamic_type_internal.
1819         (resolve_dynamic_range): Update call to
1820         resolve_dynamic_type_internal.
1821         (resolve_dynamic_union): Likewise.
1822         (resolve_dynamic_struct): Likewise.
1823         (resolve_dynamic_type): Likewise.
1824
1825 2015-04-19  Gabriel Krisman Bertazi  <gabriel@krisman.be>
1826
1827         * breakpoint.c (update_dprintf_command_list): Remove duplicated
1828         xmalloc.
1829
1830 2015-04-20  Thomas Schwinge  <thomas@codesourcery.com>
1831
1832         * reply_mig_hack.awk: Robustify parsing.
1833
1834         * reply_mig_hack.awk: Don't bother to declare an intermediate
1835         function pointer variable.
1836
1837 2015-04-17  Doug Evans  <dje@google.com>
1838
1839         * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
1840         to "exec_displacement" to avoid confusion with inner use of the name.
1841
1842 2015-04-17  Pedro Alves  <palves@redhat.com>
1843
1844         * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
1845         if HW point of TYPE isn't supported.
1846
1847 2015-04-17  Yao Qi  <yao.qi@linaro.org>
1848             Pedro Alves  <palves@redhat.com>
1849
1850         * target.h (target_can_use_hardware_watchpoint): Update comments.
1851         Remove trailing ";".
1852
1853 2015-04-17  Gary Benson <gbenson@redhat.com>
1854
1855         * remote.c (remote_add_inferior): New argument try_open_exec.
1856         If nonzero, attempt to open the inferior's executable file as
1857         the main executable if no main executable is open already.
1858         All callers updated.
1859         * NEWS: Mention that GDB now supports automatic location and
1860         retrieval of executable + files from remote targets.
1861
1862 2015-04-17  Gary Benson <gbenson@redhat.com>
1863
1864         * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
1865         * remote.c (PACKET_qXfer_exec_file): Likewise.
1866         (remote_protocol_features): Register the
1867         "qXfer:exec-file:read" feature.
1868         (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
1869         (remote_pid_to_exec_file): New function.
1870         (init_remote_ops): Initialize to_pid_to_exec_file.
1871         (_initialize_remote): Register new "set/show remote
1872         pid-to-exec-file-packet" command.
1873         * NEWS: Announce new qXfer:exec-file:read packet.
1874
1875 2015-04-17  Gary Benson <gbenson@redhat.com>
1876
1877         * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
1878         New declaration.
1879         * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
1880         New function, factored out from...
1881         * linux-nat.c (linux_child_pid_to_exec_file): ...here.
1882
1883 2015-04-17  Gary Benson <gbenson@redhat.com>
1884
1885         * exec.c (solist.h): New include.
1886         (exec_file_locate_attach): Prefix absolute executable
1887         paths with gdb_sysroot if set.
1888         * NEWS: Mention that executable paths may be prepended
1889         with sysroot.
1890
1891 2015-04-17  Gary Benson <gbenson@redhat.com>
1892
1893         * solist.h (exec_file_find): New declaration.
1894         * solib.c (solib_find_1): New function, factored out from...
1895         (solib_find): ...here.
1896         (exec_file_find): New function.
1897
1898 2015-04-17  Gary Benson <gbenson@redhat.com>
1899
1900         * gdbcore.h (exec_file_locate_attach): New declaration.
1901         * exec.c (exec_file_locate_attach): New function, factored
1902         out from...
1903         * infcmd.c (attach_command_post_wait): ...here.
1904
1905 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
1906
1907         * MAINTAINERS: Add myself for Blackfin/write-after-approval.
1908
1909 2015-04-16  Yao Qi  <yao.qi@linaro.org>
1910
1911         * infrun.c (maybe_software_singlestep): Declare.
1912         (displaced_step_fixup): Call maybe_software_singlestep.
1913
1914 2015-04-15  Doug Evans  <dje@google.com>
1915
1916         * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
1917
1918 2015-04-15  Doug Evans  <dje@google.com>
1919
1920         * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
1921
1922 2015-04-15  Simon Marchi  <simon.marchi@ericsson.com>
1923
1924         * python/lib/gdb/command/unwinders.py: Add parentheses.
1925
1926 2015-04-15  Yao Qi  <yao.qi@linaro.org>
1927
1928         * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
1929
1930 2015-04-15  Yao Qi  <yao.qi@linaro.org>
1931
1932         * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
1933
1934 2015-04-15  Yao Qi  <yao.qi@linaro.org>
1935
1936         * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
1937         dsc->insn_size instead of 4.
1938
1939 2015-04-14  Gary Benson <gbenson@redhat.com>
1940
1941         * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
1942         * minidebug.c (lzma_stat): Likewise.
1943         * solib-spu.c (spu_bfd_iovec_stat): Likewise.
1944         * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
1945
1946 2015-04-13  Stan Shebs  <stanshebs@google.com>
1947
1948         * MAINTAINERS: Update my email address.
1949
1950 2015-04-13  John Baldwin  <jhb@FreeBSD.org>
1951
1952         * amd64-tdep.c (amd64_target_description): New function.
1953         * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
1954         * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
1955         (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1956         x86 extended save area.
1957         (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1958         * amd64bsd-nat.h: Export amd64bsd_xsave_len.
1959         * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
1960         (_initialize_amd64fbsd_nat): Set "to_read_description" to
1961         "amd64fbsd_read_description".
1962         * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
1963         (amd64fbsd_supply_xstateregset): New function.
1964         (amd64fbsd_collect_xstateregset): New function.
1965         Add "amd64fbsd_xstateregset".
1966         (amd64fbsd_iterate_over_regset_sections): New function.
1967         (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
1968         "I386_FBSD_XSAVE_XCR0_OFFSET".
1969         Add "iterate_over_regset_sections" gdbarch method.
1970         Add "core_read_description" gdbarch method.
1971         * i386-tdep.c (i386_target_description): New function.
1972         * i386-tdep.h: Export i386_target_description and tdesc_i386.
1973         * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
1974         (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1975         x86 extended save area.
1976         (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1977         * i386bsd-nat.h: Export i386bsd_xsave_len.
1978         * i386fbsd-nat.c (i386fbsd_read_description): New function.
1979         (_initialize_i386fbsd_nat): Set "to_read_description" to
1980         "i386fbsd_read_description".
1981         * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
1982         (i386fbsd_core_read_description): New function.
1983         (i386fbsd_supply_xstateregset): New function.
1984         (i386fbsd_collect_xstateregset): New function.
1985         Add "i386fbsd_xstateregset".
1986         (i386fbsd_iterate_over_regset_sections): New function.
1987         (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
1988         "I386_FBSD_XSAVE_XCR0_OFFSET".
1989         Add "iterate_over_regset_sections" gdbarch method.
1990         Add "core_read_description" gdbarch method.
1991         * i386fbsd-tdep.h: New file.
1992
1993 2015-04-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
1994
1995         * NEWS (Changes since GDB 7.9): Add removed -xdb.
1996         * breakpoint.c (command_line_is_silent): Remove xdb_commands
1997         conditional.
1998         (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
1999         and lb.
2000         * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
2001         va.
2002         * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
2003         conditional.
2004         * defs.h (xdb_commands): Remove declaration.
2005         * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
2006         * guile/scm-cmd.c (command_classes): Remove xdb from comment.
2007         * infcmd.c (run_no_args_command, go_command): Remove.
2008         (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
2009         * infrun.c (xdb_handle_command): Remove.
2010         (_initialize_infrun): Remove xdb_commands for lz and z.
2011         * main.c (xdb_commands): Remove variable.
2012         (captured_main): Remove "xdb" from long_options.
2013         (print_gdb_help): Remove --xdb from help.
2014         * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
2015         * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
2016         * stack.c (backtrace_full_command, args_plus_locals_info)
2017         (current_frame_command): Remove.
2018         (_initialize_stack): Remove xdb_commands for t, T and l.
2019         * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
2020         * thread.c (_initialize_thread): Remove xdb_commands condition.
2021         * tui/tui-layout.c (tui_toggle_layout_command)
2022         (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
2023         (_initialize_tui_layout): Remove xdb_commands for td and ts.
2024         * tui/tui-regs.c (tui_scroll_regs_forward_command)
2025         (tui_scroll_regs_backward_command): Remove.
2026         (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
2027         * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
2028         (_initialize_tui_win): Remove xdb_commands for U and w.
2029         * utils.c (pagination_on_command, pagination_off_command): Remove.
2030         (initialize_utils): Remove xdb_commands for am and sm.
2031
2032 2015-04-10  Pedro Alves  <palves@redhat.com>
2033
2034         * infrun.c (displaced_step_fixup): Switch to the event ptid
2035         earlier.  If the thread stopped for a watchpoint and the
2036         target/arch has non-continuable watchpoints, cancel the displaced
2037         step.
2038         (resume): Don't start a displaced step if in-line step-over info
2039         is valid.
2040
2041 2015-04-10  Pedro Alves  <palves@redhat.com>
2042
2043         * infrun.c (displaced_step_in_progress): New function.
2044         (do_target_resume): Advise target to report all signals if
2045         displaced stepping.
2046
2047 2015-04-10  Pedro Alves  <palves@redhat.com>
2048
2049         PR gdb/18216
2050         * infrun.c (process_event_stop_test): Don't assume a step-resume
2051         is set if tp->stepped_breakpoint is true.
2052
2053 2015-04-10  Yao Qi  <yao.qi@linaro.org>
2054
2055         * arm-tdep.c (install_alu_reg): Update comment.
2056         (thumb_copy_alu_reg): Remove local variable rn.  Update
2057         debugging message.  Use r2 instead of r1 in the modified
2058         instruction.
2059
2060 2015-04-10  Pedro Alves  <palves@redhat.com>
2061
2062         PR gdb/13858
2063         * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
2064         linux_displaced_step_location as gdbarch_displaced_step_location
2065         hook.
2066         * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
2067         * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
2068         * linux-tdep.c (linux_displaced_step_location): New function,
2069         based on ppc_linux_displaced_step_location.
2070         * linux-tdep.h (linux_displaced_step_location): New declaration.
2071         * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
2072         (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
2073         Delete.
2074         (ppc_linux_init_abi): Install linux_displaced_step_location as
2075         gdbarch_displaced_step_location hook, even without Cell/B.E..
2076         (_initialize_ppc_linux_tdep): Don't install
2077         ppc_linux_inferior_created as inferior_created observer.
2078         * s390-linux-tdep.c (s390_gdbarch_init): Install
2079         linux_displaced_step_location as gdbarch_displaced_step_location
2080         hook.
2081
2082 2015-04-09  Gary Benson <gbenson@redhat.com>
2083
2084         * common/common-remote-fileio.h: Rename to...
2085         * common/fileio.h: ...this.  Update all references.
2086         (remote_fileio_to_fio_error): Rename to...
2087         (host_to_fileio_error): ...this.
2088         (remote_fileio_to_be): Rename to...
2089         (host_to_bigendian): ...this.  Update all callers.
2090         (remote_fileio_to_fio_uint): Rename to...
2091         (host_to_fileio_uint): ...this.  Update all callers.
2092         (remote_fileio_to_fio_time): Rename to...
2093         (host_to_fileio_time): ...this.  Update all callers.
2094         (remote_fileio_to_fio_stat): Rename to...
2095         (host_to_fileio_stat): ...this.
2096         Update all references.
2097         * common/common-remote-fileio.c: Rename to...
2098         * common/fileio.c: ...this.  Update all references.
2099         (remote_fileio_to_fio_error): Rename to...
2100         (host_to_fileio_error): ...this.  Update all callers.
2101         (remote_fileio_mode_to_target): Rename to...
2102         (fileio_mode_pack): ...this.  Update all callers.
2103         (remote_fileio_to_fio_mode): Rename to...
2104         (host_to_fileio_mode): ...this.  Update all callers.
2105         (remote_fileio_to_fio_ulong): Rename to...
2106         (host_to_fileio_ulong): ...this.  Update all callers.
2107         (remote_fileio_to_fio_stat): Rename to...
2108         (host_to_fileio_stat): ...this.  Update all callers.
2109
2110 2015-04-09  Andy Wingo  <wingo@igalia.com>
2111
2112         * guile/scm-frame.c (gdbscm_frame_read_register): New function.
2113         (frame_functions): Bind gdbscm_frame_read_register to
2114         frame-read-register.
2115         * guile/lib/gdb.scm (frame-read-register): Export.
2116
2117 2015-04-09  Gary Benson <gbenson@redhat.com>
2118
2119         * common/common-remote-fileio.h (remote_fileio_to_fio_error):
2120         New declaration.
2121         * common/common-remote-fileio.c (remote_fileio_to_fio_error):
2122         New function, factored out the named functions below.
2123         * inf-child.c (gdb/fileio.h): Remove include.
2124         (common-remote-fileio.h): New include.
2125         (inf_child_errno_to_fileio_error): Remove function.  Update
2126         all callers to use remote_fileio_to_fio_error.
2127         * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
2128
2129 2015-04-09  Andy Wingo  <wingo@igalia.com>
2130
2131         * MAINTAINERS (Write After Approval): Add Andy Wingo.
2132
2133 2015-04-09  H.J. Lu  <hongjiu.lu@intel.com>
2134
2135         * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
2136         Replace $zlibdir with $ZLIBDIR in LDFLAGS.
2137         * configure: Regenerated.
2138
2139 2015-04-09  Pedro Alves  <palves@redhat.com>
2140
2141         * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
2142         * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
2143         * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
2144         * gnulib/import/Makefile.am: Update.
2145         * gnulib/import/Makefile.in: Update.
2146         * gnulib/import/m4/gnulib-cache.m4: Update.
2147         * gnulib/import/m4/gnulib-comp.m4: Update.
2148         * gnulib/import/m4/strtok_r.m4: New file.
2149         * gnulib/import/strtok_r.c: New file.
2150
2151 2015-04-09  Pedro Alves  <palves@redhat.com>
2152
2153         * gnulib/update-gnulib.sh (aclocal version check): Filter out
2154         "called too early to check prototype".
2155
2156 2015-04-08  Sergio Durigan Junior  <sergiodj@redhat.com>
2157
2158         PR python/16699
2159         * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
2160         use a caching mechanism.  Adjust comments and code to reflect
2161         that.  Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
2162         (cmdpy_completer_handle_brkchars): Adjust call to
2163         cmdpy_completer_helper.  Call Py_XDECREF for 'resultobj'.
2164         (cmdpy_completer): Likewise.
2165
2166 2015-04-08  Yao Qi  <yao.qi@linaro.org>
2167
2168         * spu-tdep.c (spu_gdbarch_init): Don't call
2169         set_gdbarch_cannot_step_breakpoint.
2170
2171 2015-04-07  Sergio Durigan Junior  <sergiodj@redhat.com>
2172
2173         * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
2174
2175 2015-04-07  Pedro Alves  <palves@redhat.com>
2176
2177         * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
2178         (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
2179         (delete_exited_threads): New declaration.
2180         * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
2181         * linux-nat.c (linux_nat_update_thread_list): New function.
2182         (linux_nat_add_target): Install it.
2183         * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
2184         * thread.c (prune_threads): Use ALL_THREADS_SAFE.
2185         (delete_exited_threads): New function.
2186
2187 2015-04-07  Pedro Alves  <pedro@codesourcery.com>
2188
2189         * infrun.c (resume) <displaced stepping debug output>: Get the
2190         leader thread's regcache, not resume_ptid's.
2191
2192 2015-04-06  Doug Evans  <xdje42@gmail.com>
2193
2194         * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
2195         VAR_DOMAIN.
2196         (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
2197         Include symbol domain in debugging output.
2198
2199 2015-04-06  Pedro Alves  <palves@redhat.com>
2200             Bernd Edlinger  <bernd.edlinger@hotmail.de>
2201
2202         * configure.ac: Remove the mingw32-specific stub-termcap.o
2203         fallback, and instead fallback to the stub termcap on all hosts.
2204         * configure: Regenerate.
2205         * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
2206         symbols.
2207
2208 2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
2209
2210         * gdbtypes.c (is_dynamic_type_internal): Remove the unused
2211         "top_level" parameter.
2212         (resolve_dynamic_type_internal): Remove the unused "top_level"
2213         parameter.  Update call to is_dynamic_type_internal.
2214         (is_dynamic_type): Update call to is_dynamic_type_internal.
2215         (resolve_dynamic_range): Update call to
2216         resolve_dynamic_type_internal.
2217         (resolve_dynamic_union): Likewise.
2218         (resolve_dynamic_struct): Likewise.
2219         (resolve_dynamic_type): Likewise.
2220
2221 2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
2222
2223         * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
2224         TYPE_CODE_REF types so that they are not considered as dynamic
2225         depending on the referenced type.
2226         (resolve_dynamic_type_internal): Likewise.
2227
2228 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
2229
2230         * Makefile.in (top_srcdir): New.
2231         * configure: Regenerated.
2232
2233 2015-04-02  Gary Benson <gbenson@redhat.com>
2234
2235         * NEWS: Announce the new default sysroot of "target:".
2236
2237 2015-04-02  Gary Benson <gbenson@redhat.com>
2238
2239         * main.c (captured_main): Set gdb_sysroot to "target:"
2240         if not otherwise set.
2241
2242 2015-04-02  Gary Benson <gbenson@redhat.com>
2243
2244         * exec.c (exec_file_attach): Support "target:" filenames.
2245
2246 2015-04-02  Gary Benson <gbenson@redhat.com>
2247
2248         * solib.c (solib_find): Strip "target:" prefix from sysroot
2249         if accessing local files.
2250
2251 2015-04-02  Gary Benson <gbenson@redhat.com>
2252
2253         * symfile.c (symfile_bfd_open): Reorder to remove duplicated
2254         checks and error messages.
2255
2256 2015-04-02  Gary Benson <gbenson@redhat.com>
2257
2258         * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
2259         (remote_filename_p): Remove declaration.
2260         (remote_bfd_open): Likewise.
2261         * remote.c (remote_bfd_iovec_open): Remove function.
2262         (remote_bfd_iovec_close): Likewise.
2263         (remote_bfd_iovec_pread): Likewise.
2264         (remote_bfd_iovec_stat): Likewise.
2265         (remote_filename_p): Likewise.
2266         (remote_bfd_open): Likewise.
2267         * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
2268         * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
2269         (gdb_bfd_open_maybe_remote): Remove function.
2270         (symfile_bfd_open):  Replace remote filename check with
2271         target filename check.
2272         (reread_symbols): Use gdb_bfd_open.
2273         * build-id.c (gdbcore.h): New include.
2274         (build_id_to_debug_bfd): Use gdb_bfd_open.
2275         * infcmd.c (attach_command_post_wait): Remove remote filename
2276         check.
2277         * solib.c (solib_find): Replace remote-specific handling with
2278         target-specific handling.  Update comments where necessary.
2279         (solib_bfd_open): Replace remote-specific handling with
2280         target-specific handling.
2281         (gdb_sysroot_changed): New function.
2282         (_initialize_solib): Call the above when gdb_sysroot changes.
2283         * windows-tdep.c (gdbcore.h): New include.
2284         (windows_xfer_shared_library): Use gdb_bfd_open.
2285
2286 2015-04-02  Gary Benson <gbenson@redhat.com>
2287
2288         * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
2289         (is_target_filename): New declaration.
2290         (gdb_bfd_has_target_filename): Likewise.
2291         (gdb_bfd_open): Update documentation comment.
2292         * gdb_bfd.c (target.h): New include.
2293         (gdb/fileio.h): Likewise.
2294         (is_target_filename): New function.
2295         (gdb_bfd_has_target_filename): Likewise.
2296         (fileio_errno_to_host): Likewise.
2297         (gdb_bfd_iovec_fileio_open): Likewise.
2298         (gdb_bfd_iovec_fileio_pread): Likewise.
2299         (gdb_bfd_iovec_fileio_close): Likewise.
2300         (gdb_bfd_iovec_fileio_fstat): Likewise.
2301         (gdb_bfd_open): Use target fileio to access paths prefixed
2302         with "target:" where necessary.
2303
2304 2015-04-02  Gary Benson <gbenson@redhat.com>
2305
2306         * target.h (struct target_ops) <to_filesystem_is_local>:
2307         New field.
2308         (target_filesystem_is_local): New macro.
2309         * target-delegates.c: Regenerate.
2310         * remote.c (remote_filesystem_is_local): New function.
2311         (init_remote_ops): Initialize to_filesystem_is_local.
2312
2313 2015-04-02  Gary Benson <gbenson@redhat.com>
2314
2315         * target.h (struct target_ops) <to_fileio_fstat>: New field.
2316         (target_fileio_fstat): New declaration.
2317         * target.c (target_fileio_fstat): New function.
2318         * inf-child.c (inf_child_fileio_fstat): Likewise.
2319         (inf_child_target): Initialize to_fileio_fstat.
2320         * remote.c (init_remote_ops): Likewise.
2321
2322 2015-04-01  Sasha Smundak  <asmundak@google.com>
2323
2324         * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
2325         (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
2326         (py-unwind.o): New recipe.
2327         * NEWS: mention Python frame unwinding.
2328         * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
2329         gdb/unwinder.py and gdb/command/unwinder.py
2330         * python/lib/gdb/__init__.py (packages): Add frame_unwinders
2331         list.
2332         (execute_unwinders): New function.
2333         * python/lib/gdb/command/unwinders.py: New file.
2334         * python/lib/gdb/unwinder.py: New file.
2335         * python/py-objfile.c (objfile_object): Add frame_unwinders field.
2336         (objfpy_dealloc): Decrement frame_unwinders reference count.
2337         (objfpy_initialize): Create frame_unwinders list.
2338         (objfpy_get_frame_unwinders): New function.
2339         (objfpy_set_frame_unwinders): Ditto.
2340         (objfile_getset): Add frame_unwinders attribute to Objfile.
2341         * python/py-progspace.c (pspace_object): Add frame_unwinders field.
2342         (pspy_dealloc): Decrement frame_unwinders reference count.
2343         (pspy_initialize): Create frame_unwinders list.
2344         (pspy_get_frame_unwinders): New function.
2345         (pspy_set_frame_unwinders): Ditto.
2346         (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
2347         * python/py-unwind.c: New file.
2348         * python/python-internal.h (pspy_get_name_unwinders): New prototype.
2349         (objpy_get_frame_unwinders): New prototype.
2350         (gdbpy_initialize_unwind): New prototype.
2351         * python/python.c (gdbpy_apply_type_printers): Call
2352         gdbpy_initialize_unwind.
2353
2354 2015-04-01  Pedro Alves  <palves@redhat.com>
2355
2356         * infrun.c (resume): Check currently_stepping after clearing
2357         stepped_breakpoint, not before.
2358
2359 2015-04-01  Pedro Alves  <palves@redhat.com>
2360
2361         * infrun.c (print_target_wait_results): Print all the ptid
2362         elements.
2363
2364 2015-04-01  Pedro Alves  <palves@redhat.com>
2365
2366         * infrun.c (keep_going): Also discard cleanups if inserting
2367         breakpoints fails.
2368
2369 2015-04-01  Pedro Alves  <palves@redhat.com>
2370
2371         * infrun.c (wait_for_inferior): Install the
2372         finish_thread_state_cleanup cleanup across the whole function, not
2373         just around handle_inferior_event.
2374
2375 2015-04-01  Pedro Alves  <palves@redhat.com>
2376
2377         * infrun.c (resume) <step past permanent breakpoint>: Use
2378         do_target_resume.
2379
2380 2015-04-01  Pedro Alves  <palves@redhat.com>
2381
2382         * linux-nat.c (linux_handle_extended_wait): Always call set_running.
2383
2384 2015-04-01  Pierre-Marie de Rodat  <derodat@adacore.com>
2385
2386         * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
2387
2388 2015-04-01  Pedro Alves  <palves@redhat.com>
2389
2390         * linux-thread-db.c (record_thread): Readd the thread to gdb's
2391         list if it was marked exited.
2392
2393 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
2394
2395         * configure: Regenerated.
2396
2397 2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>
2398             Jan Kratochvil  <jan.kratochvil@redhat.com>
2399             Oleg Nesterov  <oleg@redhat.com>
2400
2401         PR corefiles/16092
2402         * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
2403         New enum identifying the various options of the coredump_filter
2404         file.
2405         (struct smaps_vmflags): New struct.
2406         (use_coredump_filter): New variable.
2407         (decode_vmflags): New function.
2408         (mapping_is_anonymous_p): Likewise.
2409         (dump_mapping_p): Likewise.
2410         (linux_find_memory_regions_full): New variables
2411         'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
2412         Removed variable 'modified'.  Read /proc/<PID>/smaps file; improve
2413         parsing of its information.  Implement memory mapping filtering
2414         based on its contents.
2415         (show_use_coredump_filter): New function.
2416         (_initialize_linux_tdep): New command 'set use-coredump-filter'.
2417         * NEWS: Mention the possibility of using the
2418         '/proc/PID/coredump_filter' file when generating a corefile.
2419         Mention new command 'set use-coredump-filter'.
2420
2421 2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>
2422
2423         * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
2424         read_memory_unsigned_integer.
2425
2426 2015-03-31  H.J. Lu  <hongjiu.lu@intel.com>
2427
2428         * Makefile.in (ZLIB): New.
2429         (ZLIBINC): Likewise.
2430         (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
2431         (CLIBS): Add $(ZLIB).
2432         * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
2433         Add -lz to LIBS.
2434         * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
2435         * top.c (print_gdb_configuration): Remove --with-zlib and
2436         --without-zlib.
2437         * config.in: Regenerated.
2438         * configure: Likewise.
2439
2440 2015-03-31  Antoine Tremblay  <antoine.tremblay@ericsson.com>
2441
2442         * NEWS: Mention info os cpus support.
2443         * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
2444         (struct osdata_type): Add cpus entry, reorder the entries in
2445         alphabetical order.
2446
2447 2015-03-31  Matthias Klose  <doko@ubuntu.com>
2448
2449         * compile/compile.c (compile_to_object): Allow triplets with or
2450         without vendor set.
2451
2452 2015-03-30  Doug Evans  <dje@google.com>
2453
2454         PR c++/18141
2455         * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
2456         klass in VAR_DOMAIN.
2457
2458 2015-03-30  Gary Benson <gbenson@redhat.com>
2459
2460         * remote.c (remote_mourn_1): Remove function.  Update all callers
2461         to use remote_mourn.
2462         (extended_remote_mourn_1): Remove function.  Update all callers
2463         to use extended_remote_mourn.
2464         (extended_remote_attach_1): Remove function.  Update all callers
2465         to use extended_remote_attach.
2466
2467 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
2468
2469         * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
2470         (HFILES_NO_SRCDIR): Add ft32-tdep.h.
2471         (ALLDEPFILES): Add ft32-tdep.c.
2472         * configure.tgt: Add FT32 entry.
2473         * ft32-tdep.c: New file, FT32 target-dependent code.
2474         * ft32-tdep.h: New file, FT32 target-dependent code.
2475
2476 2015-03-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
2477
2478         Revert:
2479         2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
2480         Code cleanup.
2481         * printcmd.c (print_command_1): Move expr variable scope.
2482
2483 2015-03-27  Joel Brobecker  <brobecker@adacore.com>
2484
2485         * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
2486
2487 2015-03-27  Andrzej Kaczmarek  <andrzej.kaczmarek@tieto.com>
2488
2489         * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
2490         sections.
2491
2492 2015-03-26  Joel Brobecker  <brobecker@adacore.com>
2493
2494         * dtrace-probe.c (dtrace_process_dof_probe): Contain any
2495         exception raised while parsing the probe arguments.
2496         Force parsing to be done using the C language parser.
2497         * expression.h (parse_expression_with_language): Declare.
2498         * parse.c (parse_expression_with_language): New function.
2499
2500 2015-03-26  Jon Turney  <jon.turney@dronecode.org.uk>
2501
2502         * MAINTAINERS (Write After Approval): Add "Jon Turney".
2503
2504 2015-03-26  Andy Wingo  <wingo@igalia.com>
2505
2506         PR symtab/18148
2507         * dwarf2read.c (struct partial_die_info): Add has_const_value
2508         member.
2509         (add_partial_symbol): Don't punt on symbols that have const_value
2510         attributes.
2511         (read_partial_die): Detect DW_AT_const_value.
2512
2513 2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
2514
2515         Code cleanup.
2516         * printcmd.c (print_command_1): Move expr variable scope.
2517
2518 2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
2519
2520         Code cleanup.
2521         * printcmd.c (validate_format): Make the parameter cmdname const.
2522
2523 2015-03-26  Don Breazeal  <donb@codesourcery.com>
2524
2525         * remote.c (_initialize_remote): Update comment.
2526
2527 2015-03-26  Pedro Alves  <palves@redhat.com>
2528             Jon TURNEY  <jon.turney@dronecode.org.uk>
2529
2530         * coffread.c (coff_symfile_read): When constructing the name of an
2531         import stub symbol from import symbol for amd64, only skip the
2532         char after _imp_ if the target is underscored (like i386) and the
2533         char is indeed the target's leading char.
2534
2535 2015-03-25  Pedro Alves  <palves@redhat.com>
2536
2537         * target.h <to_async>: Replace 'callback' and 'context' parameters
2538         with boolean 'enable' parameter.
2539         (target_async): Replace CALLBACK and CONTEXT parameters with
2540         boolean ENABLE parameter.
2541         * inf-loop.c (inferior_event_handler): Adjust.
2542         * linux-nat.c (linux_nat_attach, linux_nat_resume)
2543         (linux_nat_resume): Adjust.
2544         (async_client_callback, async_client_context): Delete.
2545         (handle_target_event): Call inferior_event_handler directly.
2546         (linux_nat_async): Replace 'callback' and 'context' parameters
2547         with boolean 'enable' parameter.  Adjust.  Remove references to
2548         async_client_callback and async_client_context.
2549         (linux_nat_close): Adjust.
2550         * record-btrace.c (record_btrace_async): Replace 'callback' and
2551         'context' parameters with boolean 'enable' parameter.  Adjust.
2552         (record_btrace_resume): Adjust.
2553         * record-full.c (record_full_async): Replace 'callback' and
2554         'context' parameters with boolean 'enable' parameter.  Adjust.
2555         (record_full_resume, record_full_core_resume): Adjust.
2556         * remote.c (struct remote_state) <async_client_callback,
2557         async_client_context>: Delete fields.
2558         (remote_start_remote, extended_remote_attach_1, remote_resume)
2559         (extended_remote_create_inferior): Adjust.
2560         (remote_async_serial_handler): Call inferior_event_handler
2561         directly.
2562         (remote_async): Replace 'callback' and 'context' parameters with
2563         boolean 'enable' parameter.  Adjust.
2564         * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
2565         Adjust.
2566         * target-delegates.c: Regenerate.
2567
2568 2015-03-25  Gary Benson <gbenson@redhat.com>
2569             Pedro Alves  <palves@redhat.com>
2570
2571         * target.c (fileio_ft_t): New typedef, define object vector.
2572         (fileio_fhandles): New static variable.
2573         (is_closed_fileio_fh): New macro.
2574         (lowest_closed_fd): New static variable.
2575         (acquire_fileio_fd): New function.
2576         (release_fileio_fd): Likewise.
2577         (fileio_fd_to_fh): New macro.
2578         (target_fileio_open): Wrap the file descriptor on success.
2579         (target_fileio_pwrite): Updated to use wrapped file descriptor.
2580         (target_fileio_pread): Likewise.
2581         (target_fileio_close): Likewise.
2582
2583 2015-03-24  Pedro Alves  <palves@redhat.com>
2584
2585         * thread.c (thread_apply_all_command): Take exited threads into
2586         account.
2587
2588 2015-03-24  Pedro Alves  <palves@redhat.com>
2589
2590         * infrun.c (resume, proceed): Mention
2591         switch_back_to_stepped_thread, not switch_back_to_stepping.
2592
2593 2015-03-24  Pedro Alves  <palves@redhat.com>
2594
2595         * infrun.c (user_visible_resume_ptid): Rewrite going from
2596         most-locked to unlocked instead of the opposite.  Move comment ...
2597         * infrun.h (user_visible_resume_ptid): ... here.
2598
2599 2015-03-24  Pedro Alves  <palves@redhat.com>
2600
2601         * linux-nat.c (linux_nat_resume): Output debug logs before trying
2602         to resume the event lwp.  Use the lwp's ptid instead of the passed
2603         in (maybe wildcard) ptid.
2604         (stop_wait_callback): Tweak debug log output.
2605         (check_stopped_by_breakpoint): Tweak debug log output.  Also dump
2606         TRAP_TRACE.
2607         (linux_nat_filter_event): In debug output, distinguish a
2608         resume_stop SIGSTOP from a delayed SIGSTOP.  Output debug logs
2609         before trying to resume the lwp.
2610
2611 2015-03-24  Joel Brobecker  <brobecker@adacore.com>
2612
2613         * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
2614         pointer indirection.
2615         * gdbtypes.c (get_dyn_prop): Adjust, following change above.
2616         (add_dyn_prop, copy_dynamic_prop_list): Likewise.
2617
2618 2015-03-24  Joel Brobecker  <brobecker@adacore.com>
2619
2620         * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
2621         Renames DYN_ATTR_DATA_LOCATION.
2622         (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
2623         DYN_ATTR_DATA_LOCATION.
2624         * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
2625         instead of DYN_ATTR_DATA_LOCATION.
2626
2627 2015-03-24  Pedro Alves  <palves@redhat.com>
2628
2629         * breakpoint.c (until_break_command): Adjust call to proceed.
2630         * gdbthread.h (struct thread_control_state) <stepping_command>:
2631         New field.
2632         * infcall.c (run_inferior_call): Adjust call to proceed.
2633         * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
2634         Adjust calls to proceed.
2635         (set_step_frame): Set the current thread's step_start_function
2636         here.
2637         (step_once): Adjust calls to proceed.
2638         (jump_command, signal_command, until_next_command)
2639         (finish_backward, finish_forward, proceed_after_attach_callback)
2640         (attach_command_post_wait): Adjust calls to proceed.
2641         * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
2642         (do_target_resume): New function, factored out from ...
2643         (resume): ... here.  Remove 'step' parameter.  Instead, check
2644         currently_stepping to determine whether the thread should be
2645         single-stepped.
2646         (proceed): Remove 'step' parameter and don't set the thread's
2647         step_start_function here.  Adjust call to 'resume'.
2648         (handle_inferior_event): Adjust calls to 'resume'.
2649         (switch_back_to_stepped_thread): Use do_target_resume instead of
2650         'resume'.
2651         (keep_going): Adjust calls to 'resume'.
2652         * infrun.h (proceed): Remove 'step' parameter.
2653         (resume): Likewise.
2654         * windows-nat.c (do_initial_windows_stuff): Adjust call to
2655         'resume'.
2656         * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
2657
2658 2015-03-24  Pedro Alves  <palves@redhat.com>
2659
2660         * gdbthread.h (struct thread_control_state) <stepping_command>:
2661         New field.
2662         * infcmd.c (step_once): Pass step=1 to clear_proceed_status.  Set
2663         the thread's stepping_command field.
2664         * infrun.c (resume): Check the thread's stepping_command flag to
2665         determine which threads should be resumed.  Rename 'entry_step'
2666         local to user_step.
2667         (clear_proceed_status_thread): Clear 'stepping_command'.
2668         (schedlock_applies): Change parameter type to struct thread_info
2669         pointer.  Adjust.
2670         (find_thread_needs_step_over): Remove 'step' parameter.  Adjust.
2671         (switch_back_to_stepped_thread): Adjust calls to
2672         'schedlock_applies'.
2673         (_initialize_infrun): Adjust "set scheduler-locking step" help.
2674
2675 2015-03-24  Pedro Alves  <palves@redhat.com>
2676
2677         * infrun.c (step_start_function): Delete and ...
2678         * gdbthread.h (struct thread_control_state) <step_start_function>:
2679         ... now a field here.
2680         * infrun.c (clear_proceed_status_thread): Clear the thread's
2681         step_start_function.
2682         (proceed, process_event_stop_test, print_stop_event): Adjust.
2683
2684 2015-03-24  Pedro Alves  <palves@redhat.com>
2685
2686         * infrun.c (proceed): No longer handle negative step.
2687
2688 2015-03-24  Gary Benson  <gbenson@redhat.com>
2689
2690         * nat/x86-linux.h (x86_linux_new_thread): New declaration.
2691         (x86_linux_prepare_to_resume): Likewise.
2692         * x86-linux-nat.c (x86_linux_new_thread):
2693         Moved to nat/x86-linux.c.
2694         (x86_linux_prepare_to_resume): Likewise.
2695         * nat/x86-linux.c (x86_linux_new_thread): New function.
2696         (x86_linux_prepare_to_resume): Likewise.
2697
2698 2015-03-24  Gary Benson  <gbenson@redhat.com>
2699
2700         * nat/x86-linux-dregs.h: New file.
2701         * nat/x86-linux-dregs.c: Likewise.
2702         * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
2703         (x86-linux-dregs.o): New rule.
2704         * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
2705         * config/i386/linux64.mh (NATDEPFILES): Likewise.
2706         * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
2707         (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
2708         (x86_linux_dr_get): Likewise.
2709         (x86_linux_dr_set): Likewise.
2710         (x86_linux_dr_get_addr): Likewise.
2711         (x86_linux_dr_get_control): Likewise.
2712         (x86_linux_dr_get_status): Likewise.
2713         (update_debug_registers_callback): Likewise.
2714         (x86_linux_dr_set_control): Likewise.
2715         (x86_linux_dr_set_addr): Likewise.
2716         (x86_linux_update_debug_registers): Likewise.
2717
2718 2015-03-24  Gary Benson  <gbenson@redhat.com>
2719
2720         * x86-linux-nat.c (x86_linux_update_debug_registers):
2721         New function, factored out from...
2722         (x86_linux_prepare_to_resume): ...this.
2723
2724 2015-03-24  Gary Benson  <gbenson@redhat.com>
2725
2726         * x86-linux-nat.c (x86_linux_dr_get): Update comments.
2727         (x86_linux_dr_set): Likewise.
2728         (x86_linux_dr_get_addr): Likewise.
2729         (x86_linux_dr_get_control): Likewise.
2730         (x86_linux_dr_get_status): Likewise.
2731         (update_debug_registers_callback): Likewise.
2732         (x86_linux_dr_set_control): Likewise.
2733         (x86_linux_dr_set_addr): Likewise.
2734         (x86_linux_prepare_to_resume): Likewise.
2735         (x86_linux_new_thread): Likewise.
2736
2737 2015-03-24  Gary Benson  <gbenson@redhat.com>
2738
2739         * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
2740         (x86_linux_new_thread): Rename argument.
2741
2742 2015-03-24  Gary Benson  <gbenson@redhat.com>
2743
2744         * nat/x86-linux.h: New file.
2745         * nat/x86-linux.c: Likewise.
2746         * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
2747         (x86-linux.o): New rule.
2748         * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
2749         * config/i386/linux64.mh (NATDEPFILES): Likewise.
2750         * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
2751         (lwp_set_arch_private_info): New declaration.
2752         (lwp_arch_private_info): Likewise.
2753         * linux-nat.c (lwp_set_arch_private_info): New function.
2754         (lwp_arch_private_info): Likewise.
2755         * x86-linux-nat.c: Include nat/x86-linux.h.
2756         (arch_lwp_info): Removed structure.
2757         (update_debug_registers_callback):
2758         Use lwp_set_debug_registers_changed.
2759         (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
2760         and lwp_set_debug_registers_changed.
2761         (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2762
2763 2015-03-24  Gary Benson  <gbenson@redhat.com>
2764
2765         * nat/linux-nat.h (ptid_of_lwp): New declaration.
2766         (lwp_is_stopped): Likewise.
2767         (lwp_stop_reason): Likewise.
2768         * linux-nat.c (ptid_of_lwp): New function.
2769         (lwp_is_stopped): Likewise.
2770         (lwp_is_stopped_by_watchpoint): Likewise.
2771         * x86-linux-nat.c (update_debug_registers_callback):
2772         Use lwp_is_stopped.
2773         (x86_linux_prepare_to_resume): Use ptid_of_lwp and
2774         lwp_stop_reason.
2775
2776 2015-03-24  Gary Benson  <gbenson@redhat.com>
2777
2778         * linux-nat.h (linux_stop_lwp): Move declaration to...
2779         * nat/linux-nat.h (linux_stop_lwp): New declaration.
2780
2781 2015-03-24  Gary Benson  <gbenson@redhat.com>
2782
2783         * linux-nat.h: Include nat/linux-nat.h.
2784         (iterate_over_lwps): Move declaration to nat/linux-nat.h.
2785         * nat/linux-nat.h (struct lwp_info): New forward declaration.
2786         (iterate_over_lwps_ftype): New typedef.
2787         (iterate_over_lwps): New declaration.
2788         * linux-nat.h (iterate_over_lwps): Update comment.  Use
2789         iterate_over_lwps_ftype.  Update callback return value check.
2790
2791 2015-03-24  Gary Benson  <gbenson@redhat.com>
2792
2793         * x86-nat.h (x86_debug_reg_state): Move declaration to...
2794         * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
2795
2796 2015-03-24  Gary Benson  <gbenson@redhat.com>
2797
2798         * nat/linux-nat.h (current_lwp_ptid): New declaration.
2799         * linux-nat.c (current_lwp_ptid): New function.
2800         * x86-linux-nat.c: Include nat/linux-nat.h.
2801         (x86_linux_dr_get_addr): Use current_lwp_ptid.
2802         (x86_linux_dr_get_control): Likewise.
2803         (x86_linux_dr_get_status): Likewise.
2804         (x86_linux_dr_set_control): Likewise.
2805         (x86_linux_dr_set_addr): Likewise.
2806
2807 2015-03-24  Antoine Tremblay  <antoine.tremblay@ericsson.com>
2808
2809         PR breakpoints/16466
2810         * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
2811
2812 2015-03-23  Joel Brobecker  <brobecker@adacore.com>
2813
2814         * ser-mingw.c (ser_windows_setparity): Fix indentation.
2815         * ser-unix.c (hardwire_setparity): Likewise.
2816
2817 2015-03-23  Yurij Grechishhev  <yurij.grechishhev@gmail.com>
2818
2819         * NEWS: Mention set/show serial parity command.
2820         * monitor.c (monitor_open): Call serial_setparity.
2821         * remote.c (remote_open_1): Likewise.
2822         * ser-base.c (ser_base_serparity): New function.
2823         * ser-base.h (ser_base_setparity): Add  declaration.
2824         * ser-go32.c (dos_ops): Set "setparity" field.
2825         * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
2826         state.Parity.
2827         (ser_windows_setparity): New function.
2828         (hardwire_ops): Add ser_windows_setparity.
2829         (tty_ops): Add NULL for setparity field.
2830         (pipe_ops): Add ser_base_setparity.
2831         (tcp_ops): Likewise.
2832         * ser-pipe.c (pipe_ops): Likewise.
2833         * ser-tcp.c (tcp_ops): Likewise.
2834         * ser-unix.c (hardwire_setparity): Add declaration.
2835         (hardwire_raw): Don't reset PARENB flag.
2836         (hardwire_setparity): New function.
2837         (hardwire_ops): Add hardwire_setparity.
2838         * serial.c (serial_setparity): New function.
2839         (serial_parity): New global.
2840         (parity_none, parity_odd, parity_even, parity_enums, parity):
2841         New static globals.
2842         (set_parity): New function.
2843         (_initialize_serial): Add set/show serial parity commands.
2844         * serial.h (GDBPARITY_NONE): Define.
2845         (GDBPARITY_ODD): Define.
2846         (GDBPARITY_EVEN): Define.
2847         (serial_setparity) Add declaration.
2848         (struct serial_ops): Add setparity field.
2849         * target.h (serial_parity): Add declaration.
2850
2851 2015-03-23  Keith Seitz  <keiths@redhat.com>
2852
2853         * linespec.c (linespec_lexer_lex_keyword): Update comment.
2854
2855 2015-03-23  Keith Seitz  <keiths@redhat.com>
2856
2857         * breakpoint.c (parse_breakpoint_sals): Use
2858         linespec_lexer_lex_keyword to ascertain if the user specified
2859         a NULL location.
2860         * linespec.c [IF_KEYWORD_INDEX]: Define.
2861         (linespec_lexer_lex_keyword): Export.
2862         (struct ls_parser) <keyword_ok>: Remove.
2863         A keyword is only a keyword if not followed by another keyword.
2864         (linespec_lexer_lex_one): Remove keyword_ok handling.
2865         Add comment explaining why the parsing stream is not advanced
2866         when a keyword is seen.
2867         (parse_linespec): Remove parser->keyword_ok.
2868         * linespec.h (linespec_lexer_lex_keyword): Add declaration.
2869
2870 2015-03-23  Keith Seitz  <keiths@redhat.com>
2871
2872         PR gdb/18021
2873         * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
2874         if we find a static method with DW_AT_vtable_elem_location.
2875
2876 2015-03-21  Eli Zaretskii  <eliz@gnu.org>
2877
2878         * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
2879         before the second loop, to avoid undefined behavior.  Reported by
2880         Anton Blanchard <anton@samba.org>.
2881
2882 2015-03-20  Keven Boell  <keven.boell@intel.com>
2883
2884         * gdbtypes.c (resolve_dynamic_type_internal): Adapt
2885         data_location usage to linked list.
2886         (resolve_dynamic_type_internal): Adapt data_location to
2887         linked list.
2888         (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
2889         (copy_type_recursive, copy_type): Add copy of linked list.
2890         * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
2891         (struct dynamic_prop_list): New struct.
2892         * dwarf2read.c (set_die_type): Set data_location data.
2893
2894 2015-03-20  Pedro Alves  <palves@redhat.com>
2895
2896         * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
2897         inner block and make it const.
2898         * machoread.c (get_archive_prefix_len): Make "lparen" const.
2899
2900 2015-03-20  Pedro Alves  <palves@redhat.com>
2901
2902         * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
2903         * breakpoint.h (set_breakpoint_condition): Update declaration.
2904
2905 2015-03-20  Pedro Alves  <palves@redhat.com>
2906
2907         * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
2908
2909 2015-03-20  Pedro Alves  <palves@redhat.com>
2910
2911         * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
2912
2913 2015-03-20  Pedro Alves  <palves@redhat.com>
2914
2915         * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
2916
2917 2015-03-20  Pedro Alves  <palves@redhat.com>
2918
2919         * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
2920         (nto_init_solib_absolute_prefix): Likewise.
2921
2922 2015-03-20  Pedro Alves  <palves@redhat.com>
2923
2924         * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
2925         * spu-tdep.c (spu_gdbarch_init): Make "name" const.
2926
2927 2015-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>
2928
2929         * config/djgpp/README: Remove gdb.hp.
2930
2931 2015-03-20  Yao Qi  <yao.qi@linaro.org>
2932
2933         * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
2934         set_gdbarch_cannot_step_breakpoint.
2935
2936 2015-03-19  Pedro Alves  <palves@redhat.com>
2937
2938         * linux-nat.c (linux_resume_one_lwp): Rename to ...
2939         (linux_resume_one_lwp_throw): ... this.  Don't handle ESRCH here,
2940         instead call perror_with_name.
2941         (check_ptrace_stopped_lwp_gone): New function.
2942         (linux_resume_one_lwp): Reimplement as wrapper around
2943         linux_resume_one_lwp_throw that swallows errors if the LWP is
2944         gone.
2945         (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
2946         swallows errors if the LWP is gone.  Use
2947         linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
2948
2949 2015-03-19  Pedro Alves  <palves@redhat.com>
2950
2951         * linux-nat.c (status_callback): Return early if the LWP has no
2952         status pending.
2953
2954 2015-03-19  Pedro Alves  <palves@redhat.com>
2955
2956         * linux-nat.c (select_event_lwp_callback): Update comment to no
2957         longer mention SIGTRAP.
2958
2959 2015-03-18  Tristan Gingold  <gingold@adacore.com>
2960
2961         * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
2962         redirection code to ...
2963         (amd64_windows_frame_decode_insns): ... Here.  Fix in prologue
2964         checks.  Fix SAVE_NONVOL operations.  Add debug code and comments.
2965
2966 2015-03-18  Gary Benson <gbenson@redhat.com>
2967
2968         (remote_protocol_features): Remove the "vFile:fstat" feature.
2969         (remote_hostio_fstat): Probe for "vFile:fstat" support.
2970
2971 2015-03-11  Yao Qi  <yao.qi@linaro.org>
2972
2973         PR tdep/18107
2974         * aarch64-linux-tdep.c: Include xml-syscall.h
2975         (aarch64_linux_get_syscall_number): New function.
2976         (aarch64_linux_init_abi): Call
2977         set_gdbarch_get_syscall_number.
2978         * syscalls/aarch64-linux.xml: New file.
2979
2980 2015-03-17  Yurij Grechishhev  <yurij.grechishhev@gmail.com>
2981
2982         * ser-base.h (ser_base_setstopbits): Change second argument name
2983         from "rate" to "num".
2984
2985 2015-03-17  Gary Benson <gbenson@redhat.com>
2986             Luke Allardyce <lukeallardyce@gmail.com>
2987
2988         PR gdb/18131
2989         * common/common-remote-fileio.h (sys/stat.h): New include.
2990         (stuct stat): Remove forward declaration.
2991
2992 2015-03-16  John Baldwin  <jhb@FreeBSD.org>
2993
2994         * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
2995         before writing core register notes.
2996
2997 2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
2998             Pedro Alves  <palves@redhat.com>
2999
3000         * gdb_curses.h (tgetnum): Mark with EXTERN_C.
3001         * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
3002         (tgoto): Wrap with extern "C".
3003
3004 2015-03-16  Pedro Alves  <palves@redhat.com>
3005             Yuanhui Zhang  <asmwarrior@gmail.com>
3006
3007         * stub-termcap.c (tputs): Change prototype.
3008
3009 2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
3010             Pedro Alves  <palves@redhat.com>
3011
3012         * windows-nat.c (struct thread_info_struct): Rename to ...
3013         (struct windows_thread_info_struct): ... this.
3014         (thread_info): Rename to ...
3015         (windows_thread_info): ... this.
3016         All users updated.
3017
3018 2015-03-14  Jan Kratochvil  <jan.kratochvil@redhat.com>
3019             Pedro Alves  <palves@redhat.com>
3020
3021         * NEWS: New Removed targets and native configurations.
3022
3023 2015-03-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
3024
3025         Remove HPUX.
3026         * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
3027         (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
3028         (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
3029         ia64-hpux-tdep.h, solib-ia64-hpux.h.
3030         (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
3031         ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
3032         * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
3033         hppa-hpux-tdep.c.
3034         * config/ia64/hpux.mh: Remove file.
3035         * config/pa/hpux.mh: Remove file.
3036         * configure: Rebuilt.
3037         * configure.ac (dlgetmodinfo, somread.o): Remove.
3038         * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3039         (ia64-*-hpux*): Remove its float format exception.
3040         * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3041         * hppa-hpux-nat.c: Remove file.
3042         * hppa-hpux-tdep.c: Remove file.
3043         * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
3044         Move them here from hppa-tdep.h
3045         (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
3046         (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
3047         * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
3048         Move them to hppa-tdep.c.
3049         (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
3050         declarations.
3051         * ia64-hpux-nat.c: Remove file.
3052         * ia64-hpux-tdep.c: Remove file.
3053         * ia64-hpux-tdep.h: Remove file.
3054         * inf-ttrace.c: Remove file.
3055         * inf-ttrace.h: Remove file.
3056         * solib-ia64-hpux.c: Remove file.
3057         * solib-ia64-hpux.h: Remove file.
3058         * solib-pa64.c: Remove file.
3059         * solib-pa64.h: Remove file.
3060         * solib-som.c: Remove file.
3061         * solib-som.h: Remove file.
3062         * somread.c: Remove file.
3063
3064 2015-03-13  John Baldwin  <jhb@FreeBSD.org>
3065
3066         * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
3067         * config.in: Regenerate.
3068         * configure: Regenerate.
3069         * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
3070         define.
3071         (fbsd_find_memory_regions): Use kinfo_getvmmap to
3072         enumerate memory regions if present.
3073
3074 2015-03-13  John Baldwin  <jhb@FreeBSD.org>
3075
3076         * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
3077         * i386fbsd-tdep.c: Fix style in various gdb_static_assert
3078         expressions.
3079         (i386fbsd_sigtramp_p): Likewise.
3080
3081 2015-03-12  John Baldwin  <jhb@FreeBSD.org>
3082
3083         * MAINTAINERS (Write After Approval): Add John Baldwin.
3084
3085 2015-03-12  Gary Benson <gbenson@redhat.com>
3086
3087         * solib.c (_initialize_solib): Make "set/show sysroot" use
3088         add_setshow_optional_filename_cmd so it can be restored to
3089         empty after being set.
3090
3091 2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>
3092
3093         * Makefile.in (SFILES): New source break-catch-syscall.c.
3094         (COMMON_OBS): New object break-catch-syscall.o.
3095         * break-catch-syscall.c: New file.
3096         * breakpoint.c: Remove inclusion of "xml-syscall.h".
3097         (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
3098         (struct syscall_catchpoint): Likewise.
3099         (dtor_catch_syscall): Likewise.
3100         (catch_syscall_inferior_data): Likewise.
3101         (struct catch_syscall_inferior_data): Likewise.
3102         (get_catch_syscall_inferior_data): Likewise.
3103         (catch_syscall_inferior_data_cleanup): Likewise.
3104         (insert_catch_syscall): Likewise.
3105         (remove_catch_syscall): Likewise.
3106         (breakpoint_hit_catch_syscall): Likewise.
3107         (print_it_catch_syscall): Likewise.
3108         (print_one_catch_syscall): Likewise.
3109         (print_mention_catch_syscall): Likewise.
3110         (print_recreate_catch_syscall): Likewise.
3111         (catch_syscall_breakpoint_ops): Likewise.
3112         (syscall_catchpoint_p): Likewise.
3113         (create_syscall_event_catchpoint): Likewise.
3114         (catch_syscall_split_args): Likewise.
3115         (catch_syscall_command_1): Likewise.
3116         (is_syscall_catchpoint_enabled): Likewise.
3117         (catch_syscall_enabled): Likewise.
3118         (catching_syscall_number): Likewise.
3119         (catch_syscall_completer): Likewise.
3120         (clear_syscall_counts): Likewise.
3121         (initialize_breakpoint_ops): Move initialization of syscall
3122         catchpoints to break-catch-syscall.c.
3123         (_initialize_breakpoint): Move code related to syscall catchpoints
3124         to break-catch-syscall.c.
3125
3126 2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>
3127
3128         * breakpoint.c (breakpoint_find_if): New function.
3129         * breakpoint.h (breakpoint_find_if): New prototype.
3130
3131 2015-03-11  Gary Benson <gbenson@redhat.com>
3132
3133         * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
3134         * remote-fileio.c (remote_fileio_to_host_uint): New function.
3135         (remote_fileio_to_host_ulong): Likewise.
3136         (remote_fileio_to_host_mode): Likewise.
3137         (remote_fileio_to_host_time): Likewise.
3138         (remote_fileio_to_host_stat): Likewise.
3139         * remote.c (PACKET_vFile_fstat): New enum value.
3140         (remote_protocol_features): Register the "vFile:fstat" feature.
3141         (remote_hostio_fstat): New function.
3142         (remote_bfd_iovec_stat): Use the above.
3143         (_initialize_remote): Register new "set/show remote
3144         hostio-fstat-packet" command.
3145         * symfile.c (separate_debug_file_exists): Update comment.
3146         * NEWS: Announce new vFile:fstat packet.
3147
3148 2015-03-11  Gary Benson <gbenson@redhat.com>
3149
3150         * common/common-remote-fileio.h: New file.
3151         * common/common-remote-fileio.c: Likewise.
3152         * Makefile.in (SFILES): Add common/common-remote-fileio.c.
3153         (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
3154         (COMMON_OBS): Add common-remote-fileio.o.
3155         (common-remote-fileio.o): New rule.
3156         * remote-fileio.h (common-remote-fileio.h): New include.
3157         * remote-fileio.c (gdb/fileio.h): Do not include.
3158         (remote_fileio_to_be): Moved to common-remote-fileio.h.
3159         (remote_fileio_to_fio_uint): Likewise.
3160         (remote_fileio_to_fio_time): Likewise.
3161         (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
3162         (remote_fileio_to_fio_mode): Likewise.
3163         (remote_fileio_to_fio_ulong): Likewise.
3164         (remote_fileio_to_fio_stat): Likewise.
3165
3166 2015-03-11  Andy Wingo  <wingo@igalia.com>
3167
3168         * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
3169         we were checking the cached type, not the cached dynamic type.
3170
3171 2015-03-11  Andy Wingo  <wingo@igalia.com>
3172
3173         * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
3174         other strings, as these are on the GC'd heap, and will be
3175         collected along with the smob.
3176
3177 2015-03-11  Andy Wingo  <wingo@igalia.com>
3178
3179         * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
3180         (objfile_functions): Bind gdbscm_objfile_progspace to
3181         objfile-progspace.
3182         * guile/lib/gdb.scm: Add objfile-progspace to exports.
3183
3184 2015-03-11  Andy Wingo  <wingo@igalia.com>
3185
3186         * guile/guile.c (_initialize_guile): Disable automatic
3187         finalization, if Guile offers us that possibility.
3188         * guile/guile.c (call_initialize_gdb_module):
3189         * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
3190         finalizers in appropriate places.
3191         * configure.ac (AC_TRY_LIBGUILE): Add a check for
3192         scm_set_automatic_finalization_enabled.
3193         * configure: Regenerated.
3194
3195 2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3196
3197         * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
3198         SAL, if possible.
3199
3200 2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3201
3202         * s390-linux-nat.c (struct arch_lwp_info): New.
3203         (s390_fix_watch_points): Rename to...
3204         (s390_prepare_to_resume): ...this.  Skip the PER info update
3205         unless the watch points have changed.
3206         (s390_refresh_per_info, s390_new_thread): New functions.
3207         (s390_insert_watchpoint): Call s390_refresh_per_info instead of
3208         s390_fix_watch_points.
3209         (s390_remove_watchpoint): Likewise.
3210         (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
3211         Register s390_prepare_to_resume.
3212
3213 2015-03-09  Pedro Alves  <palves@redhat.com>
3214
3215         Revert:
3216         2015-03-07  Pedro Alves  <palves@redhat.com>
3217         * common/gdb_socket.h: New file.
3218         * ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
3219         sys/socket.h.
3220         (net_open): Use union gdb_sockaddr_u.
3221
3222 2015-03-07  Pedro Alves  <palves@redhat.com>
3223
3224         * configure.ac (build_warnings): Move -Wmissing-prototypes
3225         -Wdeclaration-after-statement -Wmissing-parameter-type
3226         -Wold-style-declaration -Wold-style-definition to the C-specific
3227         set.
3228         * configure: Regenerate.
3229
3230 2015-03-07  Pedro Alves  <palves@redhat.com>
3231
3232         * common/gdb_socket.h: New file.
3233         * ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
3234         sys/socket.h.
3235         (net_open): Use union gdb_sockaddr_u.
3236
3237 2015-03-07  Pedro Alves  <palves@redhat.com>
3238
3239         * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
3240         (exceptions_state_mc_action_iter)
3241         (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3242         Don't define.
3243         [__cplusplus] (try_scope_depth): New global.
3244         [__cplusplus] (exception_try_scope_entry)
3245         (exception_try_scope_exit, gdb_exception_sliced_copy)
3246         (exception_rethrow): New functions.
3247         (throw_exception): In C++ mode, throw
3248         gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
3249         gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
3250         (throw_it): In C++ mode, use try_scope_depth.
3251         * common/common-exceptions.h [!__cplusplus]
3252         (exceptions_state_mc_action_iter)
3253         (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3254         Don't declare.
3255         [__cplusplus] (exception_try_scope_entry)
3256         (exception_try_scope_exit, exception_rethrow): Declare.
3257         [__cplusplus] (struct exception_try_scope): New struct.
3258         [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
3259         C++ exceptions.
3260         (struct gdb_exception_RETURN_MASK_ALL)
3261         (struct gdb_exception_RETURN_MASK_ERROR)
3262         (struct gdb_exception_RETURN_MASK_QUIT): New types.
3263
3264 2015-03-07  Pedro Alves  <palves@redhat.com>
3265
3266         * main.c (handle_command_errors): Remove volatile qualifier from
3267         parameter.
3268
3269 2015-03-07  Pedro Alves  <palves@redhat.com>
3270
3271         * breakpoint.c (save_breakpoints): Adjust to avoid code between
3272         TRY and CATCH.
3273         * gdbtypes.c (safe_parse_type): Remove empty line.
3274         (types_deeply_equal):
3275         * guile/scm-frame.c (gdbscm_frame_name):
3276         * linux-thread-db.c (find_new_threads_once):
3277         * python/py-breakpoint.c (bppy_get_commands):
3278         * record-btrace.c (record_btrace_insert_breakpoint)
3279         (record_btrace_remove_breakpoint, record_btrace_start_replaying)
3280         (record_btrace_start_replaying): Adjust to avoid code between TRY
3281         and CATCH.
3282
3283 2015-03-07  Pedro Alves  <palves@redhat.com>
3284
3285         * common/common-exceptions.c (struct catcher) <exception>: No
3286         longer a pointer to volatile exception.  Now an exception value.
3287         <mask>: Delete field.
3288         (exceptions_state_mc_init): Remove all parameters.  Adjust.
3289         (exceptions_state_mc): No longer pop the catcher here.
3290         (exceptions_state_mc_catch): New function.
3291         (throw_exception): Adjust.
3292         * common/common-exceptions.h (exceptions_state_mc_init): Remove
3293         all parameters.
3294         (exceptions_state_mc_catch): Declare.
3295         (TRY_CATCH): Rename to ...
3296         (TRY): ... this.  Remove EXCEPTION and MASK parameters.
3297         (CATCH, END_CATCH): New.
3298         All callers adjusted.
3299
3300 2015-03-07  Tom Tromey  <tromey@redhat.com>
3301
3302         * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
3303
3304 2015-03-07  Pedro Alves  <palves@redhat.com>
3305
3306         * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
3307         (amd64_epilogue_frame_cache): Normal exception handling code.
3308         * break-catch-throw.c (check_status_exception_catchpoint)
3309         (re_set_exception_catchpoint): Ditto.
3310         * cli/cli-interp.c (safe_execute_command):
3311         * cli/cli-script.c (script_from_file): Ditto.
3312         * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
3313         Ditto.
3314         * compile/compile-object-run.c (compile_object_run): Ditto.
3315         * cp-abi.c (baseclass_offset): Ditto.
3316         * cp-valprint.c (cp_print_value): Ditto.
3317         * exceptions.c (catch_exceptions_with_msg):
3318         * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
3319         * frame.c (get_frame_address_in_block_if_available): Ditto.
3320         * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
3321         (i386_sigtramp_frame_cache): Ditto.
3322         * infcmd.c (post_create_inferior): Ditto.
3323         * linespec.c (parse_linespec, find_linespec_symbols):
3324         * p-valprint.c (pascal_object_print_value): Ditto.
3325         * parse.c (parse_expression_for_completion): Ditto.
3326         * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
3327         * remote.c (remote_get_noisy_reply): Ditto.
3328         * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
3329         * solib-svr4.c (solib_svr4_r_map): Ditto.
3330
3331 2015-03-06  Gary Benson  <gbenson@redhat.com>
3332
3333         * common/common-utils.h (startswith): New inline function.
3334         All places where this logic was used updated to use the above.
3335
3336 2015-03-05  Pedro Alves  <palves@redhat.com>
3337
3338         PR gdb/18002
3339         * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
3340         after reading the breakpoint's shadow memory.
3341
3342 2015-03-05  Mark Kettenis  <kettenis@gnu.org>
3343
3344         * hppabsd-nat.c: Remove file.
3345         * hppaobsd-nat.c: New file.
3346         * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c.  Add
3347         hppaobsd-nat.c.
3348         * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
3349         hppaobsd-nat.o.
3350
3351 2015-03-04  Pedro Alves  <palves@redhat.com>
3352
3353         * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
3354         (target_decr_pc_after_break): Delete declaration.
3355         * target.c (default_target_decr_pc_after_break)
3356         (target_decr_pc_after_break): Delete.
3357         * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
3358         gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
3359         * linux-thread-db.c (check_event): Likewise.
3360         * infrun.c (adjust_pc_after_break): Likewise.
3361         * darwin-nat.c (cancel_breakpoint): Likewise.
3362         * aix-thread.c (aix_thread_wait): Likewise.
3363         * target-delegates.c: Regenerate.
3364
3365 2015-03-04  Pedro Alves  <palves@redhat.com>
3366
3367         * linux-nat.c (save_sigtrap): Check for breakpoints before
3368         checking watchpoints.
3369         (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
3370         breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
3371         (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
3372         a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
3373         (linux_nat_stopped_by_sw_breakpoint)
3374         (linux_nat_supports_stopped_by_sw_breakpoint)
3375         (linux_nat_stopped_by_hw_breakpoint)
3376         (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
3377         (linux_nat_wait_1): Don't re-increment the PC if relying on
3378         SIGTRAP's siginfo->si_code.
3379         (linux_nat_add_target): Install new target methods.
3380         * linux-thread-db.c (check_event): Don't account for breakpoint PC
3381         offset if the target already adjusted the PC.
3382         * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
3383         (GDB_ARCH_TRAP_BRKPT): New.
3384         (TRAP_HWBKPT): Define if not already defined.
3385
3386 2015-03-04  Pedro Alves  <palves@redhat.com>
3387
3388         * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
3389         * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
3390         Delete field.
3391         <stop_reason>: New field.
3392         (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
3393         (packet_set_cmd_state): New function.
3394         (remote_protocol_features): Register the "swbreak" and "hwbreak"
3395         features.
3396         (remote_query_supported): If not disabled with the corresponding
3397         "set remote foo-packet" command, report support for the swbreak
3398         and hwbreak features.
3399         (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
3400         field.
3401         <stop_reason>: New field.
3402         (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
3403         (remote_wait_as): Adjust.
3404         (remote_stopped_by_sw_breakpoint)
3405         (remote_supports_stopped_by_sw_breakpoint)
3406         (remote_stopped_by_hw_breakpoint)
3407         (remote_supports_stopped_by_hw_breakpoint): New functions.
3408         (remote_stopped_by_watchpoint): New function.
3409         (init_remote_ops): Install them.
3410         (_initialize_remote): Register new "set/show remote
3411         swbreak-feature-packet" and "set/show remote
3412         swbreak-feature-packet" commands.
3413
3414 2015-03-04  Pedro Alves  <palves@redhat.com>
3415
3416         * btrace.h: Include target/waitstatus.h.
3417         (struct btrace_thread_info) <stop_reason>: New field.
3418         * record-btrace.c (record_btrace_step_thread): Use
3419         record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3420         (record_btrace_decr_pc_after_break): Delete.
3421         (record_btrace_stopped_by_sw_breakpoint)
3422         (record_btrace_supports_stopped_by_sw_breakpoint)
3423         (record_btrace_stopped_by_hw_breakpoint)
3424         (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
3425         (init_record_btrace_ops): Install them.
3426         * record-full.c (record_full_hw_watchpoint): Delete and replace
3427         with ...
3428         (record_full_stop_reason): ... this throughout.
3429         (record_full_exec_insn): Adjust.
3430         (record_full_wait_1): Adjust.  No longer re-increment the PC.
3431         (record_full_wait_1): Adjust.  Use
3432         record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3433         (record_full_stopped_by_watchpoint): Adjust.
3434         (record_full_stopped_by_sw_breakpoint)
3435         (record_full_supports_stopped_by_sw_breakpoint)
3436         (record_full_supports_stopped_by_sw_breakpoint)
3437         (record_full_stopped_by_hw_breakpoint)
3438         (record_full_supports_stopped_by_hw_breakpoint): New functions.
3439         (init_record_full_ops, init_record_full_core_ops): Install them.
3440         * record.c (record_check_stopped_by_breakpoint): New function.
3441         * record.h: Include target/waitstatus.h.
3442         (record_check_stopped_by_breakpoint): New declaration.
3443
3444 2015-03-04  Pedro Alves  <palves@redhat.com>
3445
3446         enum lwp_stop_reason -> enum target_stop_reason
3447         * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
3448         (linux_nat_stopped_by_watchpoint, status_callback)
3449         (linux_nat_wait_1): Adjust.
3450         * linux-nat.h (enum lwp_stop_reason): Delete.
3451         (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
3452         * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
3453         * target/waitstatus.h (enum target_stop_reason): New.
3454
3455 2015-03-04  Pedro Alves  <palves@redhat.com>
3456
3457         * breakpoint.c (need_moribund_for_location_type): New function.
3458         (bpstat_stop_status): Don't skipping checking moribund locations
3459         of breakpoint types which the target tell caused a stop.
3460         (program_breakpoint_here_p): New function, factored out from ...
3461         (bp_loc_is_permanent): ... this.
3462         (update_global_location_list): Don't create a moribund location if
3463         the target supports reporting stops of the type of the removed
3464         breakpoint.
3465         * breakpoint.h (program_breakpoint_here_p): New declaration.
3466         * infrun.c (adjust_pc_after_break): Return early if the target has
3467         already adjusted the PC.  Add comments.
3468         (handle_signal_stop): If nothing explains a signal, and the target
3469         tells us the stop was caused by a software breakpoint, check if
3470         there's a breakpoint instruction in the memory.  If so, adjust the
3471         PC before presenting the stop to the user.  Otherwise, ignore the
3472         trap.  If nothing explains a signal, and the target tells us the
3473         stop was caused by a hardware breakpoint, ignore the trap.
3474         * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
3475         to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
3476         to_supports_stopped_by_hw_breakpoint>: New fields.
3477         (target_stopped_by_sw_breakpoint)
3478         (target_supports_stopped_by_sw_breakpoint)
3479         (target_stopped_by_hw_breakpoint)
3480         (target_supports_stopped_by_hw_breakpoint): Define.
3481         * target-delegates.c: Regenerate.
3482
3483 2015-03-04  Pedro Alves  <palves@redhat.com>
3484
3485         * infrun.c (follow_fork_inferior): Use the whole of the
3486         inferior_ptid and pending_follow.related_pid ptids instead of
3487         building ptids from the process components.  Adjust verbose output
3488         to use target_pid_to_str.
3489         * linux-nat.c (linux_child_follow_fork): Use the whole of the
3490         inferior_ptid and pending_follow.related_pid ptids instead of
3491         building ptids from the process components.
3492
3493 2015-03-04  Mark Kettenis  <kettenis@gnu.org>
3494
3495         * inf-ptrace.c [PT_GET_PROCESS_STATE]
3496         (inf_ptrace_insert_fork_catchpoint): New function.
3497         (inf_ptrace_remove_fork_catchpoint): New function.
3498         (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
3499
3500 2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3501
3502         * s390-linux-tdep.c (s390_register_name): Return empty string
3503         instead of NULL for registers that shouldn't be visible.
3504
3505 2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3506
3507         * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
3508         XML file for 64-bit targets.
3509
3510 2015-03-03  Simon Marchi  <simon.marchi@ericsson.com>
3511
3512         * target.h (find_default_create_inferior): Remove declaration.
3513         (find_default_attach): Likewise.
3514
3515 2015-03-03  Pedro Alves  <palves@redhat.com>
3516
3517         * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
3518         Use ptid_get_pid to get the overall process id when resuming all
3519         threads.
3520
3521 2015-03-03  Pedro Alves  <palves@redhat.com>
3522
3523         * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
3524         the lwp field of ptid.  Pass the full ptid to get_thread_regcache.
3525         * inf-ptrace.c (get_ptrace_pid): New function.
3526         (inf_ptrace_resume): Use it.
3527         * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
3528         to the lower layer.
3529
3530 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
3531
3532         * nat/linux-btrace.c: Include sys/utsname.h.
3533         (linux_determine_kernel_ptr_bits): New.
3534         (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
3535         * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
3536         ptr_bits.
3537
3538 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
3539
3540         * btrace.c (ftrace_update_function): Treat return as tailcall for
3541         "_dl_runtime_resolve".
3542
3543 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
3544
3545         * btrace.h (btrace_function) <lbegin, lend>: Remove.
3546         * btrace.c (ftrace_debug): Do not print the line range.
3547         (ftrace_skip_file, ftrace_update_lines): Remove.
3548         (ftrace_new_function): Remove lbegin and lend initialization.
3549         (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
3550         * record-btrace.c (btrace_compute_src_line_range): New.
3551         (btrace_call_history_src_line): Call btrace_compute_src_line_range.
3552
3553 2015-03-02  Pedro Alves  <palves@redhat.com>
3554
3555         * infrun.c (follow_exec): Delete all threads of the process except
3556         the event thread.  Extended comments.
3557
3558 2015-03-02  Joel Brobecker  <brobecker@adacore.com>
3559
3560         * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
3561
3562 2015-03-02  Joel Brobecker  <brobecker@adacore.com>
3563
3564         * utils.h: Remove <stdbool.h> #include.
3565         (producer_is_gcc): Change return type to "int".
3566         * utils.c (producer_is_gcc): Change return type to int.
3567         Return 1 instead of true, and 0 instead of false.
3568         Adjust function documentation accordingly.
3569
3570 2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3571
3572         * s390-linux-nat.c (have_regset_vxrs): New static variable.
3573         (s390_linux_fetch_inferior_registers): Handle vector registers, if
3574         present.
3575         (s390_linux_store_inferior_registers): Likewise.
3576         (s390_get_hwcap): Remove function.  Embed its logic...
3577         (s390_read_description): ...here.  Yield a target description with
3578         vector registers if applicable.
3579         * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
3580         "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
3581         "features/s390x-tevx-linux64.c".
3582         (struct gdbarch_tdep) <v0_full_regnum>: New field.
3583         (s390_dwarf_regmap): Add vector registers.  Remove bogus entries
3584         for "GNU/Linux-specific registers".
3585         (s390_dwarf_reg_r0l): New enum value.
3586         (s390_dwarf_reg_to_regnum): Support vector registers.
3587         (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
3588         of GPR lower halves.
3589         (regnum_is_vxr_full): New function.
3590         (s390_register_name): New function.
3591         (s390_pseudo_register_name): Handle v0-v15, which are composed of
3592         f0-f15 and v0l-v15l.
3593         (s390_pseudo_register_type): Likewise.
3594         (s390_pseudo_register_read): Likewise.
3595         (s390_pseudo_register_write): Likewise.
3596         (s390_value_from_register): Account for the fact that values are
3597         placed left-justified in vector registers.
3598         (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
3599         the vector reggroup and omit them from the general reggroup.
3600         (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
3601         (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
3602         (s390_iterate_over_regset_sections): Add iterations for the two
3603         new vector regsets.
3604         (s390_core_read_description): Yield a target description with
3605         vector registers if applicable.
3606         (s390_gdbarch_init): Handle target descriptions with vector
3607         registers.  Add "register_name" gdbarch method.
3608         (_initialize_s390_tdep): Call new tdesc initialization functions.
3609         * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
3610         (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
3611         (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
3612         (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
3613         (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
3614         (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
3615         (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
3616         (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
3617         (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
3618         (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
3619         (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
3620         (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
3621         (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
3622         (S390_NUM_REGS): Adjust value.
3623         (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
3624         (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
3625         (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
3626         * NEWS: Announce S/390 vector register support.
3627
3628 2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3629
3630         * features/s390-tevx-linux64.xml: New file.
3631         * features/s390-vx-linux64.xml: New file.
3632         * features/s390-vx.xml: New file.
3633         * features/s390x-tevx-linux64.xml: New file.
3634         * features/s390x-vx-linux64.xml: New file.
3635         * features/Makefile (WHICH): Add s390-vx-linux64,
3636         s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
3637         (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
3638         (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
3639         macros.
3640         * features/s390-tevx-linux64.c: New generated file.
3641         * features/s390-vx-linux64.c: Likewise.
3642         * features/s390x-tevx-linux64.c: Likewise.
3643         * features/s390x-vx-linux64.c: Likewise.
3644         * regformats/s390-tevx-linux64.dat: Likewise.
3645         * regformats/s390-vx-linux64.dat: Likewise.
3646         * regformats/s390x-tevx-linux64.dat: Likewise.
3647         * regformats/s390x-vx-linux64.dat: Likewise.
3648
3649 2015-02-28  Doug Evans  <xdje42@gmail.com>
3650
3651         * symtab.h (struct symtab) <next>: Fix comment.
3652
3653 2015-02-27  Simon Marchi  <simon.marchi@ericsson.com>
3654
3655         * python/python.c (python_GdbModuleDef): Rename GdbMethods to
3656         python_GdbMethods.
3657
3658 2015-02-27  Pedro Alves  <palves@redhat.com>
3659
3660         * dtrace-probe.c (dtrace_probe_ops): Make extern.
3661
3662 2015-02-27  Pedro Alves  <palves@redhat.com>
3663
3664         * common/common-exceptions.h (exception_none): Declare.
3665         * common/common-exceptions.c (exception_none): Moved from
3666         exceptions.c.
3667         (exceptions_state_mc_init): Use exception_none.
3668         * exceptions.c (exception_none): Move to
3669         common/common-exceptions.c.
3670         * exceptions.h (exception_none): Move to
3671         common/common-exceptions.h.
3672
3673 2015-02-27  Pedro Alves  <palves@redhat.com>
3674
3675         * main.c (catch_command_errors, catch_command_errors_const):
3676         Remove 'mask' argument.  Adjust.
3677         (captured_main): Adjust callers.
3678
3679 2015-02-27  Pedro Alves  <palves@redhat.com>
3680
3681         * python/python-internal.h: Include "extension-priv.h".
3682
3683 2015-02-27  Pedro Alves  <palves@redhat.com>
3684
3685         * breakpoint.h (enum print_stop_action): Move further up in the
3686         file.
3687
3688 2015-02-27  Pedro Alves  <palves@redhat.com>
3689
3690         * gdbarch.sh: Include regcache.h.
3691         * gdbarch.h: Regenerate.
3692
3693 2015-02-27  Pedro Alves  <palves@redhat.com>
3694
3695         * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
3696         Remove duplicate const.
3697         * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
3698         duplicate const.
3699
3700 2015-02-27  Pedro Alves  <palves@redhat.com>
3701
3702         * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
3703         * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
3704         * features/feature_to_c.sh: Tag the generated xml_builtin array
3705         with extern const in C++ mode.
3706
3707 2015-02-27  Tom Tromey  <tromey@redhat.com>
3708
3709         * minidebug.c (struct lzma_stream): Rename to ...
3710         (struct gdb_lzma_stream): ... this.
3711         (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
3712
3713 2015-02-27  Pedro Alves  <palves@redhat.com>
3714
3715         * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
3716         function.
3717         (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
3718         (mi_cmd_stack_list_variables): Use it.
3719
3720 2015-02-27  Pedro Alves  <palves@redhat.com>
3721
3722         * x86-linux-nat.c (u_debugreg_offset): New function.
3723         (x86_linux_dr_get, x86_linux_dr_set): Use it.
3724
3725 2015-02-27  Pedro Alves  <palves@redhat.com>
3726
3727         * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
3728         declaration.
3729         Include break-common.h.
3730
3731 2015-02-27  Tom Tromey  <tromey@redhat.com>
3732             Pedro Alves <palves@redhat.com>
3733
3734         * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
3735         local used to iterate over enums.
3736         * completer.c (signal_completer): Likewise.
3737         * i386-tdep.c (i386_stap_parse_special_token): Likewise.
3738         * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
3739         * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
3740         * tui/tui-layout.c (next_layout, prev_layout): Likewise.
3741         * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
3742         (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
3743         * tui-wingeneral.c (tui_refresh_all):  Likewise.
3744
3745 2015-02-27  Pedro Alves  <palves@redhat.com>
3746
3747         * target.h: Include "infrun.h".
3748
3749 2015-02-27  Pedro Alves  <palves@redhat.com>
3750
3751         * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
3752
3753 2015-02-27  Pedro Alves  <palves@redhat.com>
3754
3755         * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
3756         (IPA_SYM): Use it.
3757         * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
3758
3759 2015-02-27  Pedro Alves  <palves@redhat.com>
3760
3761         * cli-out.c (_rl_erase_entire_line): Move declaration out of
3762         cli_mld_erase_entire_line, and make it extern "C".
3763         * common/common-defs.h (EXTERN_C): New.
3764         * completer.c (_rl_completion_prefix_display_length)
3765         (_rl_print_completions_horizontally, QSFUNC): Move declarations
3766         out of gdb_display_match_list_1.
3767         (_rl_qsort_string_compare): Move declaration out of
3768         gdb_display_match_list_1, and make it extern "C".
3769         * defs.h (re_comp): Use EXTERN_C.
3770         * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
3771         and make it extern "C".
3772         (monstartup): Move declaration out of maintenance_set_profile_cmd,
3773         and make it extern "C".
3774         (main): Move declaration out of maintenance_set_profile_cmd.
3775         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
3776         EXTERN_C.
3777
3778 2015-02-27  Pedro Alves  <palves@redhat.com>
3779
3780         * python/python.c (GdbMethods): Rename to ...
3781         (python_GdbMethods): ... this and make extern.
3782         (GdbModuleDef): Rename to ...
3783         (python_GdbModuleDef): ... this and make extern.
3784
3785 2015-02-27  Pedro Alves  <palves@redhat.com>
3786
3787         * record-btrace.c (set_record_btrace_cmdlist)
3788         (show_record_btrace_cmdlist): Remove redefinitions.
3789
3790 2015-02-27  Tom Tromey  <tromey@redhat.com>
3791             Pedro Alves  <palves@redhat.com>
3792
3793         * dwarf2-frame.c (enum cfa_how_kind, struct
3794         dwarf2_frame_state_reg_info): Move out of struct
3795         dwarf2_frame_state.
3796         * dwarf2read.c (struct tu_stats): Move out of struct
3797         dwarf2_per_objfile.
3798         (struct file_entry): Move out of struct line_header.
3799         (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
3800         typedef_field_list): Move out of struct field_info.
3801         * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
3802         Move out of struct dynamic_prop.
3803         (union type_owner, union field_location, struct field, struct
3804         range_bounds, union type_specific): Move out of struct main_type.
3805         (struct fn_fieldlist, struct fn_field, struct typedef_field)
3806         (VOFFSET_STATIC): Move out of struct cplus_struct_type.
3807         (struct call_site_target, union call_site_parameter_u, struct
3808         call_site_parameter): Move out of struct call_site.
3809         * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
3810         m32c_prologue.
3811         (enum srcdest_kind): Move out of struct srcdest.
3812         * main.c (enum cmdarg_kind): Move out of struct cmdarg.
3813         * prologue-value.h (enum prologue_value_kind): Move out of struct
3814         prologue_value.
3815         * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
3816         gdbarch_tdep.
3817         * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
3818         out of struct field_info.
3819         * symfile.h (struct other_sections): Move out of struct
3820         section_addr_info.
3821         * symtab.c (struct symbol_cache_slot): Move out struct
3822         block_symbol_cache.
3823         * target-descriptions.c (enum tdesc_type_kind): Move out of
3824         typedef struct tdesc_type.
3825         * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
3826         struct tui_line_or_address.
3827         * value.c (enum internalvar_kind, union internalvar_data): Move
3828         out of struct internalvar.
3829         * xtensa-tdep.h (struct ctype_cache): Move out of struct
3830         gdbarch_tdep.
3831
3832 2015-02-27  Tom Tromey  <tromey@redhat.com>
3833             Pedro Alves  <palves@redhat.com>
3834
3835         Rename symbols whose names are reserved C++ keywords throughout.
3836
3837 2015-02-27  Pedro Alves  <palves@redhat.com>
3838
3839         * Makefile.in (COMPILER): New, get it from autoconf.
3840         (COMPILE.pre, CC_LD): Use COMPILER.
3841         (CXX): Get from autoconf instead.
3842         (CXX_FOR_TARGET): Default to g++ instead of gcc.
3843         * acinclude.m4: Include build-with-cxx.m4.
3844         * build-with-cxx.m4: New file.
3845         * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
3846         Disable -Werror by default if building in C++ mode.
3847         (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
3848         -Wno-narrowing in C++ mode.  Only enable -Wpointer-sign in C mode.
3849         Run supported-warning-flags tests with the C++ compiler.
3850         Save/restore CXXFLAGS too.
3851         * configure: Regenerate.
3852
3853 2015-02-27  Pedro Alves  <palves@redhat.com>
3854
3855         * libiberty.m4: New file.
3856         * acinclude.m4: Include libiberty.m4.
3857         * configure.ac: Call libiberty_INIT.
3858         * config.in, configure: Regenerate.
3859
3860 2015-02-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3861
3862         * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
3863         31-bit targets, but 64-bit targets as well.
3864         (s390_gnu_triplet_regexp): New function.
3865         (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
3866         64-bit targets as well.  Set the gnu_triplet_regexp gdbarch
3867         method.
3868
3869 2015-02-27  Jon TURNEY  <jon.turney@dronecode.org.uk>  (tiny patch)
3870
3871         * windows-nat.c (CONTEXT_DEBUGGER): Remove.
3872         (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS.  Incorporate flags
3873         from CONTEXT_DEBUGGER.
3874
3875 2015-02-26  Doug Evans  <dje@google.com>
3876
3877         * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
3878         CHECK_TYPEDEF.
3879         (set_type_vptr_fieldno): Ditto.
3880         (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
3881         * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
3882
3883 2015-02-26  Pedro Alves  <palves@redhat.com>
3884
3885         * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
3886         * complaints.c (vcomplaint): Pass argument FMT directly to
3887         printf-like functions instead of complaint->fmt.
3888         * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
3889         * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
3890         * compile/compile-loc2c.c (pushf, unary, binary): Add
3891         ATTRIBUTE_PRINTF.
3892         (do_compile_dwarf_expr_to_c): Pass string literal as format string
3893         to pushf.
3894         (BINARY): Pass string literal as format string to 'binary'.
3895         * compile/compile-object-load.c (link_callbacks_einfo): Add
3896         ATTRIBUTE_PRINTF.
3897         * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
3898
3899 2015-02-26  Pedro Alves  <palves@redhat.com>
3900
3901         * windows-termcap.c: Rename to ...
3902         * stub-termcap.c: ... this.  Adjust header line.
3903         * Makefile.in (SFILES): Refer to stub-termcap.c instead of
3904         windows-termcap.c.
3905         * configure: Regenerate.
3906         * configure.ac: Refer to stub-termcap.o instead of
3907         windows-termcap.o.
3908         * gdb_curses.h: Mention stub-termcap.c instead of
3909         windows-termcap.c.
3910
3911 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
3912
3913         * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
3914         (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
3915
3916 2015-02-26  Antoine Tremblay  <antoine.tremblay@ericsson.com>
3917
3918         * gdb/infcmd.c (print_return_value): use type_to_string to print type.
3919
3920 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
3921
3922         * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
3923         bfd_canonicalize_symtab.
3924
3925 2015-02-25  John Baldwin  <jhb@FreeBSD.org>
3926
3927         * amd64fbsd-nat.c: Include sys/user.h.
3928         (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3929         instead of KERN_PS_STRINGS to locate the signal trampoline.
3930         * i386fbsd-nat.c: Include sys/user.h.
3931         (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3932         instead of KERN_PS_STRINGS to locate the signal trampoline.
3933         * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
3934         (amd64fbsd_sigtramp_p): New.
3935         (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
3936         longer set default values.
3937         (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
3938         * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
3939         (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
3940         (i386fbsd_freebsd4_sigtramp_start)
3941         (i386fbsd_freebsd4_sigtramp_middle)
3942         (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
3943         (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
3944         (i386fbsd_sigtramp_p): New.
3945         (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
3946         longer set default values.
3947         (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
3948
3949 2015-02-25  John Baldwin  <jhb@freebsd.org>
3950
3951         * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
3952         get_frame_register instead of frame_unwind_register_unsigned.
3953
3954 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
3955
3956         PR build/18033
3957         * compile/compile-c-support.c (c_compute_program): Change // comment.
3958         * compile/compile-object-load.c (setup_sections): Change // comment.
3959
3960 2015-02-26  Joel Brobecker  <brobecker@adacore.com>
3961
3962         PR build/18033:
3963         * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
3964
3965 2015-02-23  Pedro Alves  <palves@redhat.com>
3966
3967         * remote.c (skip_to_semicolon): New function.
3968         (remote_parse_stop_reply) <T stop reply>: Use it.  Don't
3969         special case the stop reasons that look like hex numbers
3970         upfront.  Instead handle real register numbers after matching
3971         all the known stop reasons.
3972
3973 2015-02-21  Doug Evans  <dje@google.com>
3974
3975         PR c++/17976, symtab/17821
3976         * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
3977         is_in_anonymous.  All callers updated.
3978         (find_symbol_in_baseclass): Ditto.
3979         (cp_lookup_nested_symbol_1): Ditto.  Don't search all static blocks
3980         for symbols in an anonymous namespace.
3981         * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
3982         DW_AT_name directly.
3983         (dwarf2_name): Convert missing namespace name to
3984         CP_ANONYMOUS_NAMESPACE_STR.
3985
3986 2015-02-20  Pedro Alves  <palves@redhat.com>
3987
3988         * linux-nat.c (linux_handle_extended_wait): Call
3989         thread_db_notice_clone whenever a new clone LWP is detected.
3990         (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
3991         functions.
3992         * linux-nat.h (thread_db_attach_lwp): Delete declaration.
3993         (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
3994         (linux_unstop_all_lwps): Declare.
3995         * linux-thread-db.c (struct thread_get_info_inout): Delete.
3996         (thread_get_info_callback): Delete.
3997         (thread_from_lwp): Use td_thr_get_info and record_thread.
3998         (thread_db_attach_lwp): Delete.
3999         (thread_db_notice_clone): New function.
4000         (try_thread_db_load_1): If /proc is mounted and shows the
4001         process'es task list, walk over all LWPs and call thread_from_lwp
4002         instead of relying on td_ta_thr_iter.
4003         (attach_thread): Don't call check_thread_signals here.  Split the
4004         tail part of the function (which adds the thread to the core GDB
4005         thread list) to ...
4006         (record_thread): ... this function.  Call check_thread_signals
4007         here.
4008         (thread_db_wait): Don't call thread_db_find_new_threads_1.  Always
4009         call thread_from_lwp.
4010         (thread_db_update_thread_list): Rename to ...
4011         (thread_db_update_thread_list_org): ... this.
4012         (thread_db_update_thread_list): New function.
4013         (thread_db_find_thread_from_tid): Delete.
4014         (thread_db_get_ada_task_ptid): Simplify.
4015         * nat/linux-procfs.c: Include <sys/stat.h>.
4016         (linux_proc_task_list_dir_exists): New function.
4017         * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
4018
4019 2015-02-20  Pedro Alves  <palves@redhat.com>
4020
4021         * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
4022         main LWP.  Handle the case of waitpid returning 0 if we're already
4023         attached to the LWP.  Don't set the LWP's last_resume_kind to
4024         resume_stop if we already knew about the LWP.
4025         (linux_nat_filter_event): Add debug logs.
4026
4027 2015-02-20  Pedro Alves  <palves@redhat.com>
4028
4029         * target.h (forward_target_decr_pc_after_break): Delete
4030         declaration.
4031
4032 2015-02-20  Pedro Alves  <palves@redhat.com>
4033
4034         PR threads/18006
4035         * linux-thread-db.c (thread_get_info_callback): Return early if
4036         the thread's lwp id is -1.
4037
4038 2015-02-20  Joel Brobecker  <brobecker@adacore.com>
4039
4040         GDB 7.9 released.
4041
4042 2015-02-19  Steve Ellcey  <sellcey@imgtec.com>
4043
4044         * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
4045         (dtrace_get_probes) Change type of variable 'dof'.
4046
4047 2015-02-19  Antoine Tremblay  <antoine.tremblay@ericsson.com>
4048
4049         PR breakpoints/16812
4050         * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
4051         * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
4052         * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
4053
4054 2015-02-19  David Taylor  <dtaylor@emc.com>
4055
4056         * common/ax.def (setv): Fix consumed entry in setv DEFOP.
4057
4058 2015-02-18  Patrick Palka  <patrick@parcs.ath.cx>
4059
4060         * tui/tui-io.c (tui_handle_resize_during_io): Remove this
4061         function.
4062         (tui_putc): Don't call tui_handle_resize_during_io.
4063         (tui_getc): Likewise.
4064         (tui_mld_getc): Likewise.
4065         * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
4066         (tui_sigwinch_token): New static variable.
4067         (tui_initialize_win): Adjust documentation.  Set
4068         tui_sigwinch_token.
4069         (tui_async_resize_screen): New asynchronous callback.
4070         (tui_sigwinch_handler): Adjust documentation.  Asynchronously
4071         invoke tui_async_resize_screen.
4072
4073 2015-02-18  Jose E. Marchesi  <jose.marchesi@oracle.com>
4074
4075         * configure: Regenerated.
4076         * configure.ac: Use GDB_AC_TRANSFORM.
4077         * Makefile.in (aclocal_m4_deps): Added transform.m4.
4078         * acinclude.m4: sinclude transform.m4.
4079         * transform.m4: New file.
4080         (GDB_AC_TRANSFORM): New macro.
4081
4082 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4083
4084         * NEWS: Announce the support for DTrace SDT probes.
4085
4086 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4087
4088         * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
4089         (amd64_dtrace_parse_probe_argument): New function.
4090         (amd64_dtrace_probe_is_enabled): Likewise.
4091         (amd64_dtrace_enable_probe): Likewise.
4092         (amd64_dtrace_disable_probe): Likewise.
4093         (amd64_linux_init_abi): Register the
4094         `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
4095         `gdbarch_dtrace_disable_probe' and
4096         `gdbarch_dtrace_probe_is_enabled' hooks.
4097         (amd64_dtrace_disabled_probe_sequence_1): New constant.
4098         (amd64_dtrace_disabled_probe_sequence_2): Likewise.
4099         (amd64_dtrace_enable_probe_sequence): Likewise.
4100         (amd64_dtrace_disable_probe_sequence): Likewise.
4101
4102 2015-01-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4103
4104         * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
4105         the -probe-dtrace new vpossible value for PROBE_MODIFIER.
4106         * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
4107         handle ELF files.
4108         * Makefile.in (SFILES): dtrace-probe.c added.
4109         * configure: Regenerate.
4110         * dtrace-probe.c: New file.
4111         (SHT_SUNW_dof): New constant.
4112         (dtrace_probe_type): New enum.
4113         (dtrace_probe_arg): New struct.
4114         (dtrace_probe_arg_s): New typedef.
4115         (struct dtrace_probe_enabler): New struct.
4116         (dtrace_probe_enabler_s): New typedef.
4117         (dtrace_probe): New struct.
4118         (dtrace_probe_is_linespec): New function.
4119         (dtrace_dof_sect_type): New enum.
4120         (dtrace_dof_dofh_ident): Likewise.
4121         (dtrace_dof_encoding): Likewise.
4122         (DTRACE_DOF_ENCODE_LSB): Likewise.
4123         (DTRACE_DOF_ENCODE_MSB): Likewise.
4124         (dtrace_dof_hdr): New struct.
4125         (dtrace_dof_sect): Likewise.
4126         (dtrace_dof_provider): Likewise.
4127         (dtrace_dof_probe): Likewise.
4128         (DOF_UINT): New macro.
4129         (DTRACE_DOF_PTR): Likewise.
4130         (DTRACE_DOF_SECT): Likewise.
4131         (dtrace_process_dof_probe): New function.
4132         (dtrace_process_dof): Likewise.
4133         (dtrace_build_arg_exprs): Likewise.
4134         (dtrace_get_arg): Likewise.
4135         (dtrace_get_probes): Likewise.
4136         (dtrace_get_probe_argument_count): Likewise.
4137         (dtrace_can_evaluate_probe_arguments): Likewise.
4138         (dtrace_evaluate_probe_argument): Likewise.
4139         (dtrace_compile_to_ax): Likewise.
4140         (dtrace_probe_destroy): Likewise.
4141         (dtrace_gen_info_probes_table_header): Likewise.
4142         (dtrace_gen_info_probes_table_values): Likewise.
4143         (dtrace_probe_is_enabled): Likewise.
4144         (dtrace_probe_ops): New variable.
4145         (info_probes_dtrace_command): New function.
4146         (_initialize_dtrace_probe): Likewise.
4147         (dtrace_type_name): Likewise.
4148
4149 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4150
4151         * gdbarch.sh (dtrace_parse_probe_argument): New.
4152         (dtrace_probe_is_enabled): Likewise.
4153         (dtrace_enable_probe): Likewise.
4154         (dtrace_disable_probe): Likewise.
4155         * gdbarch.c: Regenerate.
4156         * gdbarch.h: Regenerate.
4157
4158 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4159
4160         * stap-probe.c (stap_probe_ops): Add NULLs in the static
4161         stap_probe_ops for `enable_probe' and `disable_probe'.
4162         * probe.c (enable_probes_command): New function.
4163         (disable_probes_command): Likewise.
4164         (_initialize_probe): Define the cli commands `enable probe' and
4165         `disable probe'.
4166         (parse_probe_linespec): New function.
4167         (info_probes_for_ops): Use parse_probe_linespec.
4168         * probe.h (probe_ops): New hooks `enable_probe' and
4169         `disable_probe'.
4170
4171 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4172
4173         * probe.c (compute_probe_arg): Moved from stap-probe.c
4174         (compile_probe_arg): Likewise.
4175         (probe_funcs): Likewise.
4176         * stap-probe.c (compute_probe_arg): Moved to probe.c.
4177         (compile_probe_arg): Likewise.
4178         (probe_funcs): Likewise.
4179
4180 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
4181
4182         * probe.c (print_ui_out_not_applicables): New function.
4183         (exists_probe_with_pops): Likewise.
4184         (info_probes_for_ops): Do not include column headers for probe
4185         types for which no probe has been actually found on any object.
4186         Also invoke `print_ui_out_not_applicables' in order to match the
4187         column rows with the header when probes of several types are
4188         listed.
4189         Print the "Type" column.
4190         * probe.h (probe_ops): Added a new probe operation `type_name'.
4191         * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
4192         (stap_type_name): New function.
4193
4194 2015-02-17  Patrick Palka  <patrick@parcs.ath.cx>
4195
4196         * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
4197         (key_is_command_char): Delete.
4198
4199 2015-02-17  Pedro Alves  <palves@redhat.com>
4200
4201         * tui/tui.c (tui_enable): Resize windows before anything
4202         might show a window.
4203
4204 2015-02-17  Max Ostapenko  <m.ostapenko@partner.samsung.com>
4205
4206         PR gdb/17984
4207         * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
4208         (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
4209         call.
4210         * aarch64-tdep.h (tdesc_aarch64): Declare.
4211
4212 2015-02-12  Mark Wielaard  <mjw@redhat.com>
4213
4214         * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
4215
4216 2015-02-13  Doug Evans  <dje@google.com>
4217
4218         * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
4219         anonymous_namespace to is_in_anonymous for consistency with the rest
4220         of the file.
4221         (cp_lookup_bare_symbol): Fix typo in comment.
4222         (cp_search_static_and_baseclasses): Ditto.
4223         (search_symbol_list): Use vertical space in comment better.
4224         (reset_directive_searched): Ditto. Fix typo.
4225         (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
4226
4227 2015-02-13  Yao Qi  <yao.qi@arm.com>
4228
4229         * MAINTAINERS: Update my email address.
4230
4231 2015-02-12  Doug Evans  <dje@google.com>
4232
4233         * symtab.c (completion_list_add_name): Fix memory leak.
4234
4235 2015-02-12  Doug Evans  <dje@google.com>
4236
4237         * completer.c (complete_line): Remove incorrect comment.
4238
4239 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
4240
4241         * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
4242         (py_print_frame): Use RETURN_MASK_ERROR.
4243
4244 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
4245
4246         * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
4247         function comment.  Wrap all function that can throw in cleanups.
4248         (gdbpy_apply_frame_filter): Wrap all function that can throw in
4249         cleanups.
4250
4251 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
4252
4253         * python/py-framefilter.c (py_print_frame): Substitute goto error.
4254         Remove the error label.
4255
4256 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
4257
4258         * python/py-framefilter.c (py_print_frame): Put conditional code paths
4259         with goto first, indent the former else codepath left.  Put variable
4260         'elided' to a new inner block.
4261
4262 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
4263
4264         * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
4265
4266 2015-02-11  Pedro Alves  <palves@redhat.com>
4267
4268         * xcoffread.c (within_function): Delete.
4269
4270 2015-02-11  Tom Tromey  <tromey@redhat.com>
4271             Pedro Alves <palves@redhat.com>
4272
4273         * breakpoint.c (base_breakpoint_ops): Delete.
4274         * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
4275         * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
4276         * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
4277         * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
4278         * python/py-arch.c (arch_object_type): Make extern.
4279         * python/py-block.c (block_syms_iterator_object_type): Make extern.
4280         * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
4281         * python/py-cmd.c (cmdpy_object_type): Make extern.
4282         * python/py-continueevent.c (continue_event_object_type)
4283         * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
4284         parameter.  Update all callers.
4285         * python/py-evtregistry.c (eventregistry_object_type): Make extern.
4286         * python/py-exitedevent.c (exited_event_object_type): Make extern.
4287         * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
4288         * python/py-function.c (fnpy_object_type): Make extern.
4289         * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
4290         * python/py-infevents.c (call_pre_event_object_type)
4291         (inferior_call_post_event_object_type).
4292         (memory_changed_event_object_type): Make extern.
4293         * python/py-infthread.c (thread_object_type): Make extern.
4294         * python/py-lazy-string.c (lazy_string_object_type): Make extern.
4295         * python/py-linetable.c (linetable_entry_object_type)
4296         (linetable_object_type, ltpy_iterator_object_type): Make extern.
4297         * python/py-newobjfileevent.c (new_objfile_event_object_type)
4298         (clear_objfiles_event_object_type): Make extern.
4299         * python/py-objfile.c (objfile_object_type): Make extern.
4300         * python/py-param.c (parmpy_object_type): Make extern.
4301         * python/py-progspace.c (pspace_object_type): Make extern.
4302         * python/py-signalevent.c (signal_event_object_type): Make extern.
4303         * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
4304         * python/py-type.c (type_object_type, field_object_type)
4305         (type_iterator_object_type): Make extern.
4306         * python/python.c (python_extension_script_ops)
4307         (python_extension_ops): Make extern.
4308         * stap-probe.c (stap_probe_ops): Make extern.
4309
4310 2015-02-11  Pedro Alves  <pedro@codesourcery.com>
4311
4312         * infrun.c (adjust_pc_after_break): Don't adjust the PC just
4313         because the event thread is not the current thread.
4314
4315 2015-02-11  Doug Evans  <xdje42@gmail.com>
4316
4317         * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
4318         been initialized yet, return NULL.
4319
4320 2015-02-11  Doug Evans  <dje@google.com>
4321
4322         * symfile.h (new_symfile_objfile): Delete.
4323         * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
4324         All callers updated.
4325
4326 2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>
4327
4328         * tui/tui-io.c (tui_handle_resize_during_io): Call
4329         tui_update_gdb_sizes() after resizing the screen.
4330         * tui/tui.c (tui_enable): Resize the terminal before
4331         calling tui_update_gdb_sizes().
4332
4333 2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>
4334
4335         * tui/tui-io.c (tui_getc): Move cursor to the end of the command
4336         line before printing a newline.
4337
4338 2015-02-11  Mark Wielaard  <mjw@redhat.com>
4339
4340         * utils.c (producer_is_gcc): Return true or false.
4341
4342 2015-02-10  Mark Wielaard  <mjw@redhat.com>
4343
4344         * utils.h (producer_is_gcc): Change return type to bool. Add major
4345         argument.
4346         * utils.c (producer_is_gcc): Likewise.
4347         (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
4348         * dwarf2read.c (check_producer): Likewise.
4349
4350 2015-02-10  Pedro Alves  <palves@redhat.com>
4351
4352         * infrun.c (displaced_step_fixup): Switch to the event thread
4353         before calling gdbarch_displaced_step_fixup.
4354
4355 2015-02-10  Antoine Tremblay <antoine.tremblay@ericsson.com>
4356
4357         * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
4358
4359 2015-02-10  Simon Marchi  <simon.marchi@ericsson.com>
4360
4361         * ada-varobj.c (ada_name_of_child): Constify parent.
4362         (ada_path_expr_of_child): Same.
4363         (ada_value_of_child): Same.
4364         (ada_type_of_child): Same.
4365         * c-varobj.c (c_is_path_expr_parent): Same.
4366         (c_describe_child): Same.
4367         (c_name_of_child): Same.
4368         (c_value_of_child): Same.
4369         (c_type_of_child): Same.
4370         (cplus_number_of_children): Same.
4371         (cplus_describe_child): Constify var.
4372         (cplus_name_of_child): Constify parent.
4373         (cplus_value_of_child): Same.
4374         (cplus_type_of_child): Same.
4375         * jv-varobj.c (java_name_of_child): Same.
4376         (java_value_of_child): Same.
4377         (java_type_of_child): Same.
4378         * varobj.c (value_of_child): Same.
4379         (varobj_default_is_path_expr_parent): Constify var, parent and return
4380         value.
4381         (varobj_get_path_expr): Constify var, modify path_expr through
4382         mutable_var.
4383         (install_new_value): Constify parent.
4384         (value_of_child): Constify parent.
4385         * varobj.h (struct varobj): Constify parent.
4386         (struct lang_varobj_ops): Constify name_of_child, value_of_child and
4387         type_of_child.
4388         (varobj_get_path_expr): Constify var.
4389         (varobj_get_path_expr_parent): Constify var and return value.
4390
4391 2015-02-10  Luis Machado  <lgustavo@codesourcery.com>
4392
4393         * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
4394         (arm_prologue_this_id): Move PC and SP limit checks to
4395         arm_prologue_unwind_stop_reason.
4396         (arm_prologue_unwind) <stop_reason> : Set to
4397         arm_prologue_unwind_stop_reason.
4398
4399 2015-02-09  Mark Wielaard  <mjw@redhat.com>
4400
4401         * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
4402         DW_LANG_Fortran08 as language_fortran.
4403
4404 2015-02-09  Sergio Durigan Junior  <sergiodj@redhat.com>
4405
4406         PR remote/17946
4407         * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
4408         of pointer against char.
4409
4410 2015-02-09  Mark Wielaard  <mjw@redhat.com>
4411
4412         * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
4413         (c_type_print_modifier): Likewise.
4414         * dwarf2read.c (read_tag_atomic_type): New function.
4415         (read_type_die_1): Handle DW_TAG_atomic_type.
4416         * gdbtypes.c (make_atomic_type): New function.
4417         (recursive_dump_type): Handle TYPE_ATOMIC.
4418         * gdbtypes.h (enum type_flag_values): Renumber.
4419         (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
4420         (TYPE_ATOMIC): New macro.
4421         (make_atomic_type): Declare.
4422
4423 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4424
4425         * btrace.c (ftrace_find_call): Skip gaps.
4426         (ftrace_new_function): Initialize level.
4427         (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
4428         (ftrace_new_switch): Update
4429         level computation.
4430         (ftrace_new_gap): New.
4431         (ftrace_update_function): Create new function after gap.
4432         (btrace_compute_ftrace_bts): Create gap on error.
4433         (btrace_stitch_bts): Update parameters.  Clear trace if it
4434         becomes empty.
4435         (btrace_stitch_trace): Update parameters.  Update callers.
4436         (btrace_clear): Reset the number of gaps.
4437         (btrace_insn_get): Return NULL if the iterator points to a gap.
4438         (btrace_insn_number): Return zero if the iterator points to a gap.
4439         (btrace_insn_end): Allow gaps at the end.
4440         (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
4441         (btrace_find_insn_by_number): Assert that the found iterator does
4442         not point to a gap.
4443         (btrace_call_next, btrace_call_prev): Assert that the last function
4444         is not a gap.
4445         * btrace.h (btrace_bts_error): New.
4446         (btrace_function): Update comment.
4447         (btrace_function) <insn, insn_offset, number>: Update comment.
4448         (btrace_function) <errcode>: New.
4449         (btrace_thread_info) <ngaps>: New.
4450         (btrace_thread_info) <replay>: Update comment.
4451         (btrace_insn_get): Update comment.
4452         * record-btrace.c (btrace_ui_out_decode_error): New.
4453         (record_btrace_info): Print number of gaps.
4454         (btrace_insn_history, btrace_call_history): Call
4455         btrace_ui_out_decode_error for gaps.
4456         (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
4457
4458 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4459
4460         * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
4461         * nat/linux-btrace.c: (btrace_this_cpu): New.
4462         (cpu_supports_bts): Call btrace_this_cpu.
4463         (intel_supports_bts): Add cpu parameter.
4464
4465 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4466
4467         * btrace.h (btrace_insn_class): New.
4468         (btrace_insn) <size, iclass>: New.
4469         * btrace.c (ftrace_find_call): Update parameters.  Update users.
4470         Use instruction classification.
4471         (ftrace_new_return): Update parameters.  Update users.
4472         (ftrace_update_function): Update parameters.  Update users.  Use
4473         instruction classification.
4474         (ftrace_update_insns): Update parameters.  Update users.
4475         (ftrace_classify_insn): New.
4476         (btrace_compute_ftrace_bts): Fill in new btrace_insn fields.  Add
4477         TRY_CATCH around call to gdb_insn_length.
4478
4479 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4480
4481         * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
4482         Update parameters.  Update users.
4483
4484 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4485
4486         * btrace.c (parse_xml_btrace_conf_bts): Add size.
4487         (btrace_conf_bts_attributes): New.
4488         (btrace_conf_children): Add attributes.
4489         * common/btrace-common.h (btrace_config_bts): New.
4490         (btrace_config)<bts>: New.
4491         (btrace_config): Update comment.
4492         * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
4493         Use config.
4494         * features/btrace-conf.dtd: Increment version.  Add size
4495         attribute to bts element.
4496         * record-btrace.c (set_record_btrace_bts_cmdlist,
4497         show_record_btrace_bts_cmdlist): New.
4498         (record_btrace_adjust_size, record_btrace_print_bts_conf,
4499         record_btrace_print_conf, cmd_set_record_btrace_bts,
4500         cmd_show_record_btrace_bts): New.
4501         (record_btrace_info): Call record_btrace_print_conf.
4502         (_initialize_record_btrace): Add commands.
4503         * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
4504         (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
4505         (btrace_sync_conf): Synchronize bts size.
4506         (_initialize_remote): Add Qbtrace-conf:bts:size packet.
4507         * NEWS: Announce new commands and new packets.
4508
4509 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4510
4511         * Makefile.in (XMLFILES): Add btrace-conf.dtd.
4512         * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
4513         (x86_linux_btrace_conf): New.
4514         (x86_linux_create_target): Initialize to_btrace_conf.
4515         * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
4516         Check format.  Split into this and ...
4517         (linux_enable_bts): ... this.
4518         (linux_btrace_conf): New.
4519         (perf_event_skip_record): Renamed into ...
4520         (perf_event_skip_bts_record): ... this.  Updated users.
4521         (linux_disable_btrace): Split into this and ...
4522         (linux_disable_bts): ... this.
4523         (linux_read_btrace): Check format.
4524         * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
4525         (linux_btrace_conf): New.
4526         (btrace_target_info)<ptid>: Moved.
4527         (btrace_target_info)<conf>: New.
4528         (btrace_target_info): Split into this and ...
4529         (btrace_tinfo_bts): ... this.  Updated users.
4530         * btrace.c (btrace_enable): Update parameters.
4531         (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
4532         (btrace_conf_children, btrace_conf_attributes)
4533         (btrace_conf_elements): New.
4534         * btrace.h (btrace_enable): Update parameters.
4535         (btrace_conf, parse_xml_btrace_conf): New.
4536         * common/btrace-common.h (btrace_config): New.
4537         * feature/btrace-conf.dtd: New.
4538         * record-btrace.c (record_btrace_conf): New.
4539         (record_btrace_cmdlist): New.
4540         (record_btrace_enable_warn, record_btrace_open): Pass
4541         &record_btrace_conf.
4542         (record_btrace_info): Print recording format.
4543         (cmd_record_btrace_bts_start): New.
4544         (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
4545         (_initialize_record_btrace): Add "record btrace bts" subcommand.
4546         Add "record bts" alias command.
4547         * remote.c (remote_state)<btrace_config>: New.
4548         (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
4549         (remote_protocol_features): Add qXfer:btrace-conf:read.
4550         (remote_open_1): Call remote_btrace_reset.
4551         (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
4552         (btrace_target_info)<conf>: New.
4553         (btrace_sync_conf, btrace_read_config): New.
4554         (remote_enable_btrace): Update parameters.  Call btrace_sync_conf and
4555         btrace_read_conf.
4556         (remote_btrace_conf): New.
4557         (init_remote_ops): Initialize to_btrace_conf.
4558         (_initialize_remote): Add qXfer:btrace-conf packet.
4559         * target.c (target_enable_btrace): Update parameters.
4560         (target_btrace_conf): New.
4561         * target.h (target_enable_btrace): Update parameters.
4562         (target_btrace_conf): New.
4563         (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
4564         (target_ops)<to_enable_btrace>: Update parameters and comment.
4565         (target_ops)<to_btrace_conf>: New.
4566         * target-delegates: Regenerate.
4567         * target-debug.h (target_debug_print_const_struct_btrace_config_p)
4568         (target_debug_print_const_struct_btrace_target_info_p): New.
4569         * NEWS: Announce new command and new packet.
4570
4571 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4572
4573         * nat/linux-btrace.h (perf_event_buffer): New.
4574         (btrace_target_info) <buffer, size, data_head>: Replace with ...
4575         <bts>: ... this.
4576         * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
4577         (perf_event_buffer_size, perf_event_buffer_begin)
4578         (perf_event_buffer_end, linux_btrace_has_changed): Removed.
4579         Updated users.
4580         (perf_event_new_data): New.
4581
4582 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4583
4584         * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
4585         * record-btrace.c (record_btrace_open): Remove call to
4586         target_supports_btrace.
4587         * remote.c (remote_supports_btrace): Update parameters.
4588         * target.c (target_supports_btrace): Update parameters.
4589         * target.h (to_supports_btrace, target_supports_btrace): Update
4590         parameters.
4591         * target-delegates.c: Regenerate.
4592         * target-debug.h (target_debug_print_enum_btrace_format): New.
4593         * nat/linux-btrace.c
4594         (kernel_supports_btrace): Rename into ...
4595         (kernel_supports_bts): ... this.  Update users.  Update warning text.
4596         (intel_supports_btrace): Rename into ...
4597         (intel_supports_bts): ... this.  Update users.
4598         (cpu_supports_btrace): Rename into ...
4599         (cpu_supports_bts): ... this.  Update users.
4600         (linux_supports_btrace): Update parameters.  Split into this and ...
4601         (linux_supports_bts): ... this.
4602         * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
4603
4604 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
4605
4606         * Makefile.in (SFILES): Add common/btrace-common.c.
4607         (COMMON_OBS): Add common/btrace-common.o.
4608         (btrace-common.o): Add build rules.
4609         * btrace.c (parse_xml_btrace): Update parameters.
4610         (parse_xml_btrace_block): Set format field.
4611         (btrace_add_pc, btrace_fetch): Use struct btrace_data.
4612         (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
4613         (btrace_compute_ftrace): Split into this and...
4614         (btrace_compute_ftrace_bts): ...this.
4615         (btrace_stitch_trace): Split into this and...
4616         (btrace_stitch_bts): ...this.
4617         * btrace.h (parse_xml_btrace): Update parameters.
4618         (make_cleanup_btrace_data): New.
4619         * common/btrace-common.c: New.
4620         * common/btrace-common.h: Include common-defs.h.
4621         (btrace_block_s): Update comment.
4622         (btrace_format): New.
4623         (btrace_format_string): New.
4624         (btrace_data_bts): New.
4625         (btrace_data): New.
4626         (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
4627         * remote.c (remote_read_btrace): Update parameters.
4628         * target.c (target_read_btrace): Update parameters.
4629         * target.h (target_read_btrace): Update parameters.
4630         (target_ops)<to_read_btrace>: Update parameters.
4631         * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
4632         * target-delegates.c: Regenerate.
4633         * target-debug (target_debug_print_struct_btrace_data_p): New.
4634         * nat/linux-btrace.c (linux_read_btrace): Split into this and...
4635         (linux_read_bts): ...this.
4636         * nat/linux-btrace.h (linux_read_btrace): Update parameters.
4637
4638 2015-02-06  Doug Evans  <dje@google.com>
4639
4640         * remote-m32r-sdi.c: Include symfile.h.
4641
4642 2015-02-06  Doug Evans  <dje@google.com>
4643
4644         * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
4645         * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
4646         to here.
4647
4648 2015-02-06  Pedro Alves  <palves@redhat.com>
4649
4650         * linux-thread-db.c (find_new_threads_callback): Add debug output.
4651
4652 2015-02-06  Simon Marchi  <simon.marchi@ericsson.com>
4653
4654         PR gdb/15678
4655         * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
4656         (enable_count_command): Check args for NULL value.
4657
4658 2015-02-05  Doug Evans  <xdje42@gmail.com>
4659
4660         * guile/scm-frame.c: Fix spelling errors in a comment.
4661
4662 2015-02-04  Jan Kratochvil  <jan.kratochvil@redhat.com>
4663
4664         * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
4665         * python/py-value.c (valpy_fetch_lazy): Use it.  Remove cast to the
4666         return type.
4667
4668 2015-02-04  Pedro Alves  <palves@redhat.com>
4669
4670         * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
4671         (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
4672         returns true.
4673         (resume_stopped_resumed_lwps): Don't check whether the thread is
4674         marked as executing.
4675         (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
4676
4677 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4678
4679         * regset.h (struct regset): Add flags field.
4680         (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
4681         * corelow.c (get_core_register_section): Add warning if the size
4682         exceeds the requested size and the regset does not have the
4683         REGSET_VARIABLE_SIZE flag set.
4684         * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
4685         flag.
4686         * armbsd-tdep.c (armbsd_gregset): Likewise.
4687         * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
4688         * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
4689         * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
4690         * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
4691
4692 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4693
4694         * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
4695         For ".reg-xstate", explicitly specify the requested section size
4696         via X86_XSTATE_SIZE instead of just 0 on input and
4697         X86_XSTATE_MAX_SIZE on output.
4698         * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
4699         Likewise.
4700
4701 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4702
4703         PR corefiles/17808:
4704         * gdbarch.sh (iterate_over_regset_sections_cb): Document this
4705         function type, particularly its SIZE parameter.
4706         * gdbarch.h: Regenerate.
4707         * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
4708         actual against required size using ">=" instead of "==".
4709         (amd64_collect_fpregset): Likewise.
4710         * i386-tdep.c (i386_supply_gregset): Likewise.
4711         (i386_collect_gregset): Likewise.
4712         (i386_supply_fpregset): Likewise.
4713         (i386_collect_fpregset): Likewise.
4714         * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
4715         (mips_fill_gregset_wrapper): Likewise.
4716         (mips_supply_fpregset_wrapper): Likewise.
4717         (mips_fill_fpregset_wrapper): Likewise.
4718         (mips64_supply_gregset_wrapper): Likewise.
4719         (mips64_fill_gregset_wrapper): Likewise.
4720         (mips64_supply_fpregset_wrapper): Likewise.
4721         (mips64_fill_fpregset_wrapper): Likewise.
4722         * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
4723         (am33_supply_fpregset_method): Likewise.
4724         (am33_collect_gregset_method): Likewise.
4725         (am33_collect_fpregset_method): Likewise.
4726
4727 2015-02-04  Doug Evans  <dje@google.com>
4728             Pedro Alves  <palves@redhat.com>
4729             Eli Zaretskii  <eliz@gnu.org>
4730
4731         PR tui/17810
4732         * tui/tui-command.c (tui_refresh_cmd_win): New function.
4733         * tui/tui-command.c (tui_refresh_cmd_win): Declare.
4734         * tui/tui-file.c: #include tui/tui-command.h.
4735         (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
4736         (tui_file_flush): Refresh command window if stream is gdb_stdout.
4737         * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
4738
4739 2015-02-04  Pedro Alves  <palves@redhat.com>
4740
4741         Fix build breakage.
4742         * event-loop.c (gdb_do_one_event): Add default switch case.
4743
4744 2015-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
4745
4746         Filter out inferior gcc option -fpreprocessed.
4747         * compile/compile.c (filter_args): New function.
4748         (get_args): Use it.
4749
4750 2015-02-03  Pedro Alves  <palves@redhat.com>
4751
4752         * event-loop.c: Don't declare nor define a queue type for
4753         gdb_event_p.
4754         (event_queue): Delete.
4755         (create_event, create_file_event, gdb_event_xfree)
4756         (initialize_event_loop, process_event): Delete.
4757         (gdb_do_one_event): Return as soon as one event is handled.
4758         (handle_file_event): Change prototype.  Used the passed in
4759         file_handler pointer and ready_mask instead of looping over all
4760         file handlers.
4761         (gdb_wait_for_event): Update the poll/select timeouts before
4762         blocking.  Run event handlers directly instead of queueing events.
4763         Return as soon as one event is handled.
4764         (struct async_event_handler_data): Delete.
4765         (invoke_async_event_handler): Delete.
4766         (check_async_event_handlers): Change return type to int.  Run
4767         event handlers directly instead of queueing events.  Return as
4768         soon as one event is handled.
4769         (handle_timer_event): Delete.
4770         (update_wait_timeout): New function, factored out from
4771         poll_timers.
4772         (poll_timers): Reimplement.
4773         * event-loop.h (initialize_event_loop): Delete declaration.
4774         * top.c (gdb_init): Don't call initialize_event_loop.
4775
4776 2015-02-03  Pedro Alves  <palves@redhat.com>
4777
4778         * event-loop.c (clear_async_event_handler): New function.
4779         * event-loop.h (clear_async_event_handler): New declaration.
4780         * record-btrace.c (record_btrace_async): New function.
4781         (init_record_btrace_ops): Install record_btrace_async.
4782         * record-full.c (record_full_async): New function.
4783         (record_full_resume): Don't mark the async event source here.
4784         (init_record_full_ops): Install record_full_async.
4785         (record_full_core_resume): Don't mark the async event source here.
4786         (init_record_full_core_ops): Install record_full_async.
4787         * remote.c (remote_async): Mark and clear the async stop reply
4788         queue event-loop token as appropriate.
4789
4790 2015-02-03  Pedro Alves  <palves@redhat.com>
4791
4792         * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
4793         target_is_async_p instead of target_can_async.
4794         (linux_nat_wait): Use target_is_async_p instead of
4795         target_can_async.  Don't enable async here.
4796         * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
4797         target_is_async_p instead of target_can_async.
4798
4799 2015-02-02  Simon Marchi  <simon.marchi@ericsson.com>
4800
4801         * varobj.h (lang_varobj_ops): Mention which return values need
4802         to be freed.
4803
4804 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
4805
4806         * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
4807
4808 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
4809
4810         PR gdb/17856:
4811         * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
4812         results found in the cache.
4813
4814 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
4815
4816         PR gdb/17854:
4817         * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
4818         when allocating a new one.
4819
4820 2015-02-01  Tom Tromey  <tom@tromey.com>
4821
4822         * MAINTAINERS: Remove myself.
4823
4824 2015-01-31  Doug Evans  <xdje42@gmail.com>
4825
4826         * dwarf2read.c (process_structure_scope): Update setting of
4827         TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
4828         * gdbtypes.c (internal_type_vptr_fieldno): New function.
4829         (set_type_vptr_fieldno): New function.
4830         (internal_type_vptr_basetype): New function.
4831         (set_type_vptr_basetype): New function.
4832         (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
4833         TYPE_VPTR_BASETYPE.
4834         (allocate_cplus_struct_type): Initialize vptr_fieldno.
4835         (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
4836         (print_cplus_stuff): ... moved here.
4837         (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
4838         * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
4839         moved to ...
4840         (struct cplus_struct_type): ... here.  All uses updated.
4841         (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
4842         (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
4843         (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
4844         * stabsread.c (read_tilde_fields): Update setting of
4845         TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
4846
4847 2015-01-31  Doug Evans  <xdje42@gmail.com>
4848
4849         * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
4850         to self_p.
4851         (cp_print_class_member): Rename local domain to self_type.
4852         * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
4853         domain_type to self_type.
4854         (set_die_type) <need_gnat_info>: Handle
4855         TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
4856         * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
4857         TYPE_SPECIFIC_SELF_TYPE.
4858         * gdbtypes.c (internal_type_self_type): New function.
4859         (set_type_self_type): New function.
4860         (smash_to_memberptr_type): Rename parameter domain to self_type.
4861         Update setting of TYPE_SELF_TYPE.
4862         (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
4863         (smash_to_method_type): Rename parameter domain to self_type.
4864         Update setting of TYPE_SELF_TYPE.
4865         (check_stub_method): Call smash_to_method_type.
4866         (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
4867         (copy_type_recursive): Ditto.
4868         * gdbtypes.h (enum type_specific_kind): New value
4869         TYPE_SPECIFIC_SELF_TYPE.
4870         (struct main_type) <type_specific>: New member self_type.
4871         (struct cplus_struct_type) <fn_field.type>: Update comment.
4872         (TYPE_SELF_TYPE): Rewrite.
4873         (internal_type_self_type, set_type_self_type): Declare.
4874         * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
4875         self_type.
4876         (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
4877         * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
4878         TYPE_TARGET_TYPE.
4879         * stabsread.c (read_member_functions): Mark methods with
4880         TYPE_CODE_METHOD, not TYPE_CODE_FUNC.  Update setting of
4881         TYPE_SELF_TYPE.
4882
4883 2015-01-31  Doug Evans  <xdje42@gmail.com>
4884
4885         * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
4886         All uses updated.
4887
4888 2015-01-31  Doug Evans  <xdje42@gmail.com>
4889
4890         * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
4891         or unions.  Return zero if union.
4892         (gnuv3_get_vtable): Call check_typedef.  Assert only passed structs.
4893         (gnuv3_rtti_type): Pass already-check_typedef'd value to
4894         gnuv3_get_vtable.
4895         (compute_vtable_size): Assert only passed structs.
4896         (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
4897
4898 2015-01-31  Doug Evans  <xdje42@gmail.com>
4899
4900         * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
4901         kinds.
4902
4903 2015-01-31  Gary Benson <gbenson@redhat.com>
4904             Doug Evans  <dje@google.com>
4905
4906         PR cli/9007
4907         PR cli/11920
4908         PR cli/15548
4909         * cli/cli-cmds.c (complete_command): Notify user if max-completions
4910         reached.
4911         * common/common-exceptions.h (enum errors)
4912         <MAX_COMPLETIONS_REACHED_ERROR>: New value.
4913         * completer.h (get_max_completions_reached_message): New declaration.
4914         (max_completions): Likewise.
4915         (completion_tracker_t): New typedef.
4916         (new_completion_tracker): New declaration.
4917         (make_cleanup_free_completion_tracker): Likewise.
4918         (maybe_add_completion_enum): New enum.
4919         (maybe_add_completion): New declaration.
4920         (throw_max_completions_reached_error): Likewise.
4921         * completer.c (max_completions): New global variable.
4922         (new_completion_tracker): New function.
4923         (free_completion_tracker): Likewise.
4924         (make_cleanup_free_completion_tracker): Likewise.
4925         (maybe_add_completions): Likewise.
4926         (throw_max_completions_reached_error): Likewise.
4927         (complete_line): Remove duplicates and limit result to max_completions
4928         entries.
4929         (get_max_completions_reached_message): New function.
4930         (gdb_display_match_list): Handle max_completions.
4931         (_initialize_completer): New declaration and function.
4932         * symtab.c: Include completer.h.
4933         (completion_tracker): New static variable.
4934         (completion_list_add_name): Call maybe_add_completion.
4935         (default_make_symbol_completion_list_break_on_1): Renamed from
4936         default_make_symbol_completion_list_break_on.  Maintain
4937         completion_tracker across calls to completion_list_add_name.
4938         (default_make_symbol_completion_list_break_on): New function.
4939         * top.c (init_main): Set rl_completion_display_matches_hook.
4940         * tui/tui-io.c: Include completer.h.
4941         (tui_old_rl_display_matches_hook): New static global.
4942         (tui_rl_display_match_list): Notify user if max-completions reached.
4943         (tui_setup_io): Save/restore rl_completion_display_matches_hook.
4944         * NEWS (New Options): Mention set/show max-completions.
4945
4946 2015-01-31  Gary Benson  <gbenson@redhat.com>
4947
4948         * symtab.c (struct add_name_data) <code>: New field.
4949         Updated comments.
4950         (add_symtab_completions): New function.
4951         (symtab_expansion_callback): Likewise.
4952         (default_make_symbol_completion_list_break_on): Set datum.code.
4953         Move minimal symbol scan before calling expand_symtabs_matching.
4954         Scan known primary symtabs for externs and statics before calling
4955         expand_symtabs_matching.  Pass symtab_expansion_callback as
4956         expansion_notify argument to expand_symtabs_matching.  Do not scan
4957         primary symtabs for externs and statics after calling
4958         expand_symtabs_matching.
4959
4960 2015-01-31  Gary Benson  <gbenson@redhat.com>
4961
4962         * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
4963         (struct quick_symbol_functions) <expand_symtabs_matching>:
4964         New argument expansion_notify.  All uses updated.
4965         (expand_symtabs_matching): New argument expansion_notify.
4966         All uses updated.
4967         * symfile-debug.c (debug_qf_expand_symtabs_matching):
4968         Also print expansion notify.
4969         * symtab.c (expand_symtabs_matching_via_partial): Call
4970         expansion_notify whenever a partial symbol table is expanded.
4971         * dwarf2read.c (dw2_expand_symtabs_matching): Call
4972         expansion_notify whenever a symbol table is instantiated.
4973
4974 2015-01-31  Doug Evans  <xdje42@gmail.com>
4975
4976         * cli-out.c: #include completer.h, readline/readline.h.
4977         (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
4978         (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
4979         (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
4980         * cli-out.h (cli_display_match_list): Declare.
4981         * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
4982         (ELLIPSIS_LEN): Ditto.
4983         (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
4984         (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
4985         (gdb_fnprint, gdb_print_filename): Ditto.
4986         (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
4987         (gdb_display_match_list): Ditto.
4988         * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
4989         (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
4990         (mld_beep_ftype, mld_read_key_ftype): Ditto.
4991         (match_list_displayer): New struct.
4992         (gdb_display_match_list): Declare.
4993         * top.c (init_main): Set rl_completion_display_matches_hook.
4994         * tui/tui-io.c: #include completer.h.
4995         (printable_part, PUTX, print_filename, get_y_or_n): Delete.
4996         (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
4997         (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
4998         (tui_mld_getc, tui_mld_read_key): Ditto.
4999         (tui_rl_display_match_list): Rewrite.
5000         (tui_handle_resize_during_io): New arg for_completion.  All callers
5001         updated.
5002
5003 2015-01-31  Doug Evans  <xdje42@gmail.com>
5004
5005         Add symbol lookup cache.
5006         * NEWS: Document new options and commands.
5007         * symtab.c (symbol_cache_key): New static global.
5008         (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
5009         (SYMBOL_LOOKUP_FAILED): New macro.
5010         (symbol_cache_slot_state): New enum.
5011         (block_symbol_cache): New struct.
5012         (symbol_cache): New struct.
5013         (new_symbol_cache_size, symbol_cache_size): New static globals.
5014         (hash_symbol_entry, eq_symbol_entry): New functions.
5015         (symbol_cache_byte_size, resize_symbol_cache): New functions.
5016         (make_symbol_cache, free_symbol_cache): New functions.
5017         (get_symbol_cache, symbol_cache_cleanup): New function.
5018         (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
5019         (symbol_cache_lookup, symbol_cache_clear_slot): New function.
5020         (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
5021         (symbol_cache_flush, symbol_cache_dump): New functions.
5022         (maintenance_print_symbol_cache): New function.
5023         (maintenance_flush_symbol_cache): New function.
5024         (symbol_cache_stats): New function.
5025         (maintenance_print_symbol_cache_statistics): New function.
5026         (symtab_new_objfile_observer): New function.
5027         (symtab_free_objfile_observer): New function.
5028         (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
5029         (_initialize_symtab): Init symbol_cache_key.  New parameter
5030         maint symbol-cache-size.  New maint commands print symbol-cache,
5031         print symbol-cache-statistics, flush-symbol-cache.
5032         Install new_objfile, free_objfile observers.
5033
5034 2015-01-31  Joel Brobecker  <brobecker@adacore.com>
5035
5036         PR symtab/17855
5037         * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
5038         to end.
5039
5040 2015-01-31  Doug Evans  <xdje42@gmail.com>
5041
5042         * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
5043         * auto-load.c: #include ctype.h.
5044         (struct auto_load_pspace_info): Replace member loaded_scripts with
5045         new members loaded_script_files, loaded_script_texts.
5046         (auto_load_pspace_data_cleanup): Update.
5047         (init_loaded_scripts_info): Update.
5048         (get_auto_load_pspace_data_for_loading): Update.
5049         (maybe_add_script_file): Renamed from maybe_add_script.  All callers
5050         updated.
5051         (maybe_add_script_text): New function.
5052         (clear_section_scripts): Update.
5053         (source_script_file, execute_script_contents): New functions.
5054         (source_section_scripts): Add support for
5055         SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
5056         (print_scripts): New function.
5057         (auto_load_info_scripts): Also print inlined scripts.
5058         (maybe_print_unsupported_script_warning): Renamed from
5059         unsupported_script_warning_print.  All callers updated.
5060         (maybe_print_script_not_found_warning): Renamed from
5061         script_not_found_warning_print.  All callers updated.
5062         * extension-priv.h (struct extension_language_script_ops): New member
5063         objfile_script_executor.
5064         * extension.c (ext_lang_objfile_script_executor): New function.
5065         * extension.h (objfile_script_executor_func): New typedef.
5066         (ext_lang_objfile_script_executor): Declare.
5067         * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
5068         * guile/guile.c (guile_extension_script_ops): Update.
5069         * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
5070         * python/python.c (python_extension_script_ops): Update.
5071         (gdbpy_execute_objfile_script): New function.
5072
5073 2015-01-31  Eli Zaretskii  <eliz@gnu.org>
5074
5075         * tui/tui-io.c (tui_expand_tabs): New function.
5076         (tui_puts, tui_redisplay_readline): Expand TABs into the
5077         appropriate number of spaces.
5078         * tui/tui-regs.c: Include tui-io.h.
5079         (tui_register_format): Call tui_expand_tabs to expand TABs into
5080         the appropriate number of spaces.
5081         * tui/tui-io.h: Add prototype for tui_expand_tabs.
5082
5083 2015-01-30  Doug Evans  <dje@google.com>
5084
5085         * NEWS: "info source" command now display producer string if present.
5086         * source.c (source_info): Print producer string if present.
5087
5088 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5089
5090         * varobj.c (varobj_delete): Fix comment.
5091
5092 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5093
5094         * varobj.c (create_child): Modify comment.
5095
5096 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5097
5098         * ada-varobj.c (ada_number_of_children): Constify struct varobj *
5099         parameter.
5100         (ada_name_of_variable): Same.
5101         (ada_path_expr_of_child): Same.
5102         (ada_value_of_variable): Same.
5103         (ada_value_is_changeable_p): Same.
5104         (ada_value_has_mutated): Same.
5105         * c-varobj.c (varobj_is_anonymous_child): Same.
5106         (c_is_path_expr_parent): Same.
5107         (c_number_of_children): Same.
5108         (c_name_of_variable): Same.
5109         (c_path_expr_of_child): Same.
5110         (get_type): Same.
5111         (c_value_of_variable): Same.
5112         (cplus_number_of_children): Same.
5113         (cplus_name_of_variable): Same.
5114         (cplus_path_expr_of_child): Same.
5115         (cplus_value_of_variable): Same.
5116         * jv-varobj.c (java_number_of_children): Same.
5117         (java_name_of_variable): Same.
5118         (java_path_expr_of_child): Same.
5119         (java_value_of_variable): Same.
5120         * varobj.c (number_of_children): Same.
5121         (name_of_variable): Same.
5122         (is_root_p): Same.
5123         (varobj_ensure_python_env): Same.
5124         (varobj_get_objname): Same.
5125         (varobj_get_expression): Same.
5126         (varobj_get_display_format): Same.
5127         (varobj_get_display_hint): Same.
5128         (varobj_has_more): Same.
5129         (varobj_get_thread_id): Same.
5130         (varobj_get_frozen): Same.
5131         (dynamic_varobj_has_child_method): Same.
5132         (varobj_get_gdb_type): Same.
5133         (is_path_expr_parent): Same.
5134         (varobj_default_is_path_expr_parent): Same.
5135         (varobj_get_language): Same.
5136         (varobj_get_attributes): Same.
5137         (varobj_is_dynamic_p): Same.
5138         (varobj_get_child_range): Same.
5139         (varobj_value_has_mutated): Same.
5140         (varobj_get_value_type): Same.
5141         (number_of_children): Same.
5142         (name_of_variable): Same.
5143         (check_scope): Same.
5144         (varobj_editable_p): Same.
5145         (varobj_value_is_changeable_p): Same.
5146         (varobj_floating_p): Same.
5147         (varobj_default_value_is_changeable_p): Same.
5148
5149 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5150
5151         * varobj.c (varobj_get_path_expr): Set var->path_expr.
5152         * c-varobj.c (c_path_expr_of_child): Set local var instead of
5153         child->path_expr.
5154         (cplus_path_expr_of_child): Same.
5155
5156 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5157
5158         * mi-cmd-var.c (print_varobj): Free varobj_get_expression
5159         result.
5160         (mi_cmd_var_info_expression): Same.
5161         * varobj.c (varobj_get_expression): Mention in the comment that
5162         the result must by freed by the caller.
5163
5164 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
5165
5166         * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
5167         varobj_get_type.
5168         (varobj_update_one): Same.
5169         * varobj.c (update_type_if_necessary): Free curr_type_str and
5170         new_type_str.
5171         (varobj_get_type): Specify in comment that the result needs to be
5172         freed by the caller.
5173
5174 2015-01-29  Doug Evans  <dje@google.com>
5175
5176         PR symtab/17890
5177         * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
5178
5179 2015-01-25  Mark Wielaard  <mjw@redhat.com>
5180
5181         * dwarf2read.c (checkproducer): Call producer_is_gcc.
5182         * utils.c (producer_is_gcc_ge_4): Likewise.
5183         (producer_is_gcc): New function.
5184         * utils.h (producer_is_gcc): New declaration.
5185
5186 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
5187
5188         * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
5189         kind.
5190         * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
5191         parameter by "addr_stack" parameter.
5192         (resolve_dynamic_range): Replace "addr" parameter by
5193         "stack_addr" parameter.  Update function documentation.
5194         Update code accordingly.
5195         (resolve_dynamic_array, resolve_dynamic_union)
5196         (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
5197         (resolve_dynamic_type): Update code, following the changes made
5198         to resolve_dynamic_type_internal's interface.
5199         * dwarf2loc.h (struct property_addr_info): New.
5200         (dwarf2_evaluate_property): Replace "address" parameter
5201         by "addr_stack" parameter.  Adjust function documentation.
5202         (struct dwarf2_offset_baton): New.
5203         (struct dwarf2_property_baton): Update documentation of
5204         field "referenced_type" to be more general. New field
5205         "offset_info" in union data field.
5206         * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
5207         parameter by "addr_stack" parameter.  Adjust code accordingly.
5208         Add support for PROP_ADDR_OFFSET properties.
5209         * dwarf2read.c (attr_to_dynamic_prop): Add support for
5210         DW_AT_data_member_location attributes as well.  Use case
5211         statements instead of if/else condition.
5212
5213 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
5214
5215         * ada-varobj.c (ada_varobj_get_array_number_of_children):
5216         Return zero if PARENT_VALUE is NULL and parent_type's
5217         range type is dynamic.
5218
5219 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
5220
5221         * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
5222         nonzero if the type's subtype is dynamic.
5223         (resolve_dynamic_range): Also resolve the range's subtype.
5224
5225 2015-01-29  Alexander Klimov  <alserkli@inbox.ru>  (tiny patch)
5226
5227         Pushed by Joel Brobecker  <brobecker@adacore.com>.
5228         * symfile.c (unmap_overlay_command): Initialize sec to NULL.
5229
5230 2015-01-27  Doug Evans  <dje@google.com>
5231
5232         * NEWS: Mention gdb.Objfile.username.
5233         * python/py-objfile.c (objfpy_get_username): New function.
5234         (objfile_getset): Add "username".
5235
5236 2015-01-24  Mark Wielaard  <mjw@redhat.com>
5237
5238         * stack.c (return_command): Markup warning message with _.
5239
5240 2015-01-24  Doug Evans  <xdje42@gmail.com>
5241
5242         * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
5243
5244 2015-01-24  Jan Kratochvil  <jan.kratochvil@redhat.com>
5245
5246         Fix 100x slowdown regression on DWZ files.
5247         * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
5248         (struct line_header): Add offset and offset_in_dwz.
5249         (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
5250         (free_line_header_voidp): New declaration.
5251         (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
5252         functions.
5253         (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
5254         (handle_DW_AT_stmt_list): Use line_header_hash.
5255         (free_line_header_voidp): New function.
5256         (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
5257         (dwarf_decode_lines): New parameter decode_mapping, use it.
5258         (dwarf2_free_objfile): Free line_header_hash.
5259
5260 2015-01-23  Simon Marchi  <simon.marchi@ericsson.com>
5261
5262         PR gdb/17416
5263         * valops.c (value_rtti_indirect_type): Catch exception thrown by
5264         value_ind.
5265
5266 2015-01-15  Mark Wielaard  <mjw@redhat.com>
5267
5268         * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
5269         DW_AT_noreturn.
5270         * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
5271         calling_convention an 8 bit bit field.
5272         (TYPE_NO_RETURN): New macro.
5273         * infcmd.c (finish_command): Query if function does not return
5274         normally.
5275         * stack.c (return_command): Likewise.
5276
5277 2015-01-23  Pedro Alves  <palves@redhat.com>
5278
5279         * linux-nat.c (linux_is_async_p): New macro.
5280         (linux_nat_is_async_p):
5281         (linux_nat_terminal_inferior): Check whether the target can async
5282         instead of whether it is already async.
5283         (linux_nat_terminal_ours): Don't check whether the target is
5284         async.
5285         (linux_async_pipe): Use linux_is_async_p.
5286
5287 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
5288
5289         * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
5290         '-ascending'.
5291         * thread.c (tp_array_compar_ascending, tp_array_compar): New.
5292         (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
5293         Sort tp_array using tp_array_compar.
5294         (_initialize_thread): Extend thread_apply_all_command help.
5295
5296 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
5297
5298         * corelow.c (core_open): Call also thread_command.
5299         * gdbthread.h (thread_command): New prototype moved from ...
5300         * thread.c (thread_command): ... here.
5301         (thread_command): Make it global.
5302
5303 2015-01-22  Pedro Alves  <palves@redhat.com>
5304
5305         * configure.ac [*mingw32*]: Check $curses_found instead of
5306         $prefer_curses.
5307         * configure: Regenerate.
5308         * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
5309         HAVE_NCURSES_NCURSES_H checks.
5310
5311 2015-01-22  Eli Zaretskii  <eliz@gnu.org>
5312
5313         * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
5314         fails with the 1st arg NULL, try again with "unknown".  Don't test
5315         the "cup" capability: it isn't supported by the Windows port of
5316         ncurses, but the Windows console driver is still capable of
5317         supporting TUI.
5318
5319 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
5320
5321         * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
5322
5323 2015-01-22  Eli Zaretskii  <eliz@gnu.org>
5324
5325         * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
5326         (ALLDEPFILES): Remove irix5-nat.c.  These two are part of the
5327         reason that "make TAGS" is broken.
5328
5329 2015-01-22  Chen Gang  <gang.chen.5i5j@gmail.com>
5330
5331         * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
5332         and check additional store instructions.
5333
5334 2015-01-21  Wei-cheng Wang  <cole945@gmail.com>
5335
5336         * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
5337
5338 2015-01-21  Wei-cheng Wang  <cole945@gmail.com>
5339
5340         * ppc-linux-tdep.c (ppc_skip_trampoline_code,
5341         ppc_canonicalize_syscall, ppc_linux_syscall_record,
5342         ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
5343         * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5344         * rs6000-tdep.c (rs6000_epilogue_frame_cache,
5345         rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
5346         rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
5347         ppc_process_record_op19, ppc_process_record_op31,
5348         ppc_process_record_op59, ppc_process_record_op60,
5349         ppc_process_record_op63): Likewise.
5350
5351 2015-01-20  Joel Brobecker  <brobecker@adacore.com>
5352
5353         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
5354         (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
5355         strerror.
5356
5357 2015-01-20  Wei-cheng Wang  <cole945@gmail.com>
5358
5359         * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
5360         ppc_process_record_op31, ppc_process_record_op59,
5361         ppc_process_record_op60, ppc_process_record_op63,
5362         ppc_process_record): Fix -Wformat warning.
5363         * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
5364         Remove unused variables.
5365
5366 2015-01-20  Chen Gang  <gang.chen.5i5j@gmail.com>
5367
5368         * MAINTAINERS (Write After Approval): Add "Chen Gang".
5369
5370 2015-01-19  Eli Zaretskii  <eliz@gnu.org>
5371
5372         * configure.ac [*mingw32*]: Only add windows-termcap.o to
5373         CONFIG_OBS if not building with a curses library.
5374         * configure: Regenerate.
5375
5376         * windows-termcap.c: Include defs.h.  Make the whole body empty if
5377         either one of HAVE_CURSES_H or HAVE_NCURSES_H or
5378         HAVE_NCURSES_NCURSES_H is defined.
5379
5380 2015-01-19  Joel Brobecker  <brobecker@adacore.com>
5381
5382         * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
5383         from end of line to start of next line.
5384
5385 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
5386
5387         * ppc-linux-tdep.c (ppc_skip_trampoline_code):
5388         Scan PLT stub backward for reverse debugging.
5389         * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5390
5391 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
5392             Ulrich Weigand  <uweigand@de.ibm.com>
5393
5394         * configure.tgt (powerpc*-*-linux): Add linux-record.o to
5395         gdb_target_obs.
5396         (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
5397         record.
5398         (ppc_canonicalize_syscall, ppc_linux_syscall_record,
5399         ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
5400         (ppc_linux_init_abi): Set process_record, process_record_signal.
5401         * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
5402         ppc_linux_record_tdep to gdbarch_tdep.
5403         (ppc_process_record): New declaration.
5404         * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
5405         ppc_process_record_op19, ppc_process_record_op31,
5406         ppc_process_record_op59, ppc_process_record_op60,
5407         ppc_process_record_op63, ppc_process_record): New functions.
5408
5409 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
5410
5411         * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
5412         rs6000_in_function_epilogue_frame_p and add an argument
5413         for frame_info.
5414         (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
5415         rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
5416         New functions.
5417         (rs6000_epilogue_frame_unwind): New.
5418         (rs6000_gdbarch_init): Append epilogue unwinder.
5419
5420 2015-01-16  Sergio Durigan Junior  <sergiodj@redhat.com>
5421
5422         * nat/linux-personality.c: Replace "#ifndef
5423         HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
5424         !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
5425         systems.
5426
5427 2015-01-16  Eli Zaretskii  <eliz@gnu.org>
5428
5429         * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
5430         functions.
5431         (_initialize_tui_win) <border-kind, border-mode>:
5432         <active-border-mode>: Use tui_set_var_cmd as the "set" function.
5433         (tui_set_tab_width_command): Fix the commentary.
5434
5435         * tui/tui-win.h: Add prototype for tui_rehighlight_all.
5436
5437         * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
5438         Doc fix.
5439         (tui_set_tab_width_command): Delete and recreate the source and
5440         the disassembly windows, to show the effect of the changed tab
5441         size immediately.
5442
5443         * tui/tui-data.h (LINE_PREFIX): Make shorter
5444         (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
5445         "Thread NNNNN.XXXX" thread ID notation on Windows.
5446
5447 2015-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
5448
5449         Fix gcc-5 compilation.
5450         * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
5451
5452 2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>
5453
5454         * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
5455         (linux-personality.o): New rule.
5456         * common/common-defs.h: Include <stdint.h>.
5457         * config/aarch64/linux.mh (NATDEPFILES): Include
5458         linux-personality.o.
5459         * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
5460         * config/arm/linux.mh (NATDEPFILES): Likewise.
5461         * config/i386/linux64.mh (NATDEPFILES): Likewise.
5462         * config/i386/linux.mh (NATDEPFILES): Likewise.
5463         * config/ia64/linux.mh (NATDEPFILES): Likewise.
5464         * config/m32r/linux.mh (NATDEPFILES): Likewise.
5465         * config/m68k/linux.mh (NATDEPFILES): Likewise.
5466         * config/mips/linux.mh (NATDEPFILES): Likewise.
5467         * config/pa/linux.mh (NATDEPFILES): Likewise.
5468         * config/powerpc/linux.mh (NATDEPFILES): Likewise.
5469         * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
5470         * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
5471         * config/s390/linux.mh (NATDEPFILES): Likewise.
5472         * config/sparc/linux64.mh (NATDEPFILES): Likewise.
5473         * config/sparc/linux.mh (NATDEPFILES): Likewise.
5474         * config/tilegx/linux.mh (NATDEPFILES): Likewise.
5475         * config/xtensa/linux.mh (NATDEPFILES): Likewise.
5476         * defs.h: Remove #include <stdint.h> (moved to
5477         common/common-defs.h).
5478         * linux-nat.c: Include nat/linux-personality.h.  Remove #include
5479         <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
5480         nat/linux-personality.c).
5481         (linux_nat_create_inferior): Remove code to disable address space
5482         randomization (moved to nat/linux-personality.c).  Create cleanup
5483         to disable address space randomization.
5484         * nat/linux-personality.c: New file.
5485         * nat/linux-personality.h: Likewise.
5486
5487 2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>
5488
5489         * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
5490         common/posix-strerror.c.
5491         (posix-strerror.o): New rule.
5492         (mingw-strerror.o): Likewise.
5493         * common/common-utils.h (safe_strerror): Move prototype to here,
5494         from utils.h.
5495         * common/common.host: New file.
5496         * common/mingw-strerror.c: Likewise.
5497         * common/posix-strerror.c: Likewise.
5498         * configure: Regenerated.
5499         * configure.ac: Source common/common.host.  Add variable
5500         common_host_obs to gdb_host_obs.
5501         * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
5502         gdb/common/posix-strerror.c when warning about the use of
5503         strerror.
5504         * mingw-hdep.c (safe_strerror): Remove definition; move it to
5505         common/mingw-strerror.c.
5506         * posix-hdep.c (safe_strerror): Remove definition; move it to
5507         common/posix-hdep.c.
5508         * utils.h (safe_strerror): Remove prototype; move to
5509         common/common-utils.h.
5510
5511 2015-01-15  Joel Brobecker  <brobecker@adacore.com>
5512
5513         GDB 7.8.2 released.
5514
5515 2015-01-15  Joel Brobecker  <brobecker@adacore.com>
5516
5517         * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
5518         ___XA type if the array has already been fixed.
5519
5520 2015-01-14  Yao Qi  <yao@codesourcery.com>
5521
5522         * Makefile.in (ppc-linux.o): New rule.
5523         * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
5524         * configure.ac: AC_CHECK_FUNCS(getauxval).
5525         * config.in: Re-generated.
5526         * configure: Re-generated.
5527         * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
5528         Declare.
5529         * nat/ppc-linux.c: New file.
5530         * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
5531         Call ppc64_64bit_inferior_p.
5532
5533 2015-01-14  Yao Qi  <yao@codesourcery.com>
5534
5535         * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
5536         nat/ppc-linux.h.
5537         (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
5538         (PPC_FEATURE_HAS_DFP): Likewise.
5539         (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
5540         (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
5541         (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
5542         Include "nat/ppc-linux.h".
5543         * nat/ppc-linux.h: New file.
5544         * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
5545
5546 2015-01-14  Pedro Alves  <palves@redhat.com>
5547
5548         PR gdb/17525
5549         * breakpoint.c: Include "interps.h".
5550         (bpstat_do_actions_1): Also check whether the interpreter is
5551         async.
5552
5553 2015-01-14  Pedro Alves  <palves@redhat.com>
5554
5555         PR cli/17828
5556         * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
5557         reinstall if the interpreter is sync.
5558
5559 2015-01-13  Doug Evans  <dje@google.com>
5560
5561         * objfiles.c (objfile_filename): New function.
5562         * objfiles.h (objfile_filename): Declare it.
5563         (objfile_name): Add function comment.
5564         * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
5565         bfd file name (which may be realpath'd), and the original name.
5566
5567 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
5568
5569         * NEWS: Create a new section for the next release branch.
5570         Rename the section of the current branch, now that it has
5571         been cut.
5572
5573 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
5574
5575         GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
5576         * version.in: Bump version to 7.9.50.DATE-cvs.
5577
5578 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
5579
5580         * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
5581         Remove trailing new-line in argument of call to warning.
5582
5583 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
5584
5585         * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
5586         new-line in argument of call to "warning".
5587
5588 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
5589
5590         * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
5591         in static block, then try searching for primitive types.
5592
5593 2015-01-12  Patrick Palka  <patrick@parcs.ath.cx>
5594
5595         * top.h (gdb_add_history): Declare.
5596         * top.c (command_count): New variable.
5597         (gdb_add_history): New function.
5598         (gdb_safe_append_history): New static function.
5599         (quit_force): Call it.
5600         (command_line_input): Use gdb_add_history instead of
5601         add_history.
5602         * event-top.c (command_line_handler): Likewise.
5603
5604 2015-01-12  James Clarke  <jrtc27@jrtc27.com>  (tiny patch)
5605
5606         PR gdb/17046
5607         * darwin-nat.c: Replace <machine/setjmp.h> #include by
5608         <setjmp.h> #include.
5609
5610 2015-01-11  Doug Evans  <xdje42@gmail.com>
5611
5612         * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
5613
5614 2015-01-11  Doug Evans  <xdje42@gmail.com>
5615
5616         PR gdb/15830
5617         * NEWS: The "maint demangle" command is renamed as "demangle".
5618         * demangle.c: #include cli/cli-utils.h, language.h.
5619         (demangle_command): New function.
5620         (_initialize_demangle): Add new command "demangle".
5621         * maint.c (maintenance_demangle): Stub out.
5622         (_initialize_maint_cmds): Update help text for "maint demangle",
5623         and mark as deprecated.
5624
5625 2015-01-11  Mark Kettenis  <kettenis@gnu.org>
5626
5627         * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
5628         inferior_thread is a function.
5629
5630 2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>
5631
5632         * Makefile.in (.y.c): Don't munge yacc's #line
5633         directives.
5634
5635 2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>
5636
5637         * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
5638         to prompt for input.
5639         * tui/tui-hooks.c (tui_query_hook): Remove.
5640         (tui_install_hooks): Don't set deprecated_query_hook.
5641         * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
5642         height calculation.  Always update the command window's cur_line.
5643
5644 2015-01-09  Pedro Alves  <palves@redhat.com>
5645
5646         * breakpoint.c (hardware_breakpoint_inserted_here_p): New
5647         function.
5648         * breakpoint.h (hardware_breakpoint_inserted_here_p): New
5649         declaration.
5650         * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
5651         (linux_resume_one_lwp): Store the thread's PC.  Adjust to clear
5652         stop_reason.
5653         (check_stopped_by_watchpoint): New function.
5654         (save_sigtrap): Reimplement.
5655         (linux_nat_stopped_by_watchpoint): Adjust.
5656         (linux_nat_lp_status_is_event): Delete.
5657         (stop_wait_callback): Only call save_sigtrap after storing the
5658         pending status.
5659         (status_callback): If the thread had been stopped for a breakpoint
5660         that has since been removed, discard the event and resume the LWP.
5661         (count_events_callback, select_event_lwp_callback): Use
5662         lwp_status_pending_p instead of linux_nat_lp_status_is_event.
5663         (cancel_breakpoint): Rename to ...
5664         (check_stopped_by_breakpoint): ... this.  Record whether the LWP
5665         stopped for a software breakpoint or hardware breakpoint.
5666         (select_event_lwp): Only give preference to the stepping LWP in
5667         all-stop mode.  Adjust comments.
5668         (stop_and_resume_callback): Remove references to new_pending_p.
5669         (linux_nat_filter_event): Likewise.  Leave exit events of the
5670         leader thread pending here.  Handle signal short circuiting here.
5671         Only call save_sigtrap after storing the pending waitstatus.
5672         (linux_nat_wait_1): Remove 'retry' label.  Remove references to
5673         new_pending.  Don't handle leaving events the caller is not
5674         interested in pending here, nor handle signal short-circuiting
5675         here.  Also give equal priority to all LWPs that have had events
5676         in non-stop mode.  If reporting a software breakpoint event,
5677         unadjust the LWP's PC.
5678         * linux-nat.h (enum lwp_stop_reason): New.
5679         (struct lwp_info) <stop_pc>: New field.
5680         (struct lwp_info) <stopped_by_watchpoint>: Delete field.
5681         (struct lwp_info) <stop_reason>: New field.
5682         * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
5683
5684 2015-01-09  Pedro Alves  <palves@redhat.com>
5685
5686         * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
5687         Set the LWP's 'resumed' flag.
5688
5689 2015-01-09  Pedro Alves  <palves@redhat.com>
5690
5691         * linux-nat.c (linux_resume_one_lwp): New function.
5692         (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
5693         (linux_nat_resume): Use lwp_status_pending_p and
5694         linux_resume_one_lwp.
5695         (linux_handle_syscall_trap): Use linux_resume_one_lwp.
5696         (linux_handle_extended_wait): Use linux_resume_one_lwp.
5697         (status_callback, running_callback): Use lwp_status_pending_p.
5698         (lwp_status_pending_p): New function.
5699         (stop_and_resume_callback): Use lwp_status_pending_p.
5700         (linux_nat_filter_event): Use linux_resume_one_lwp.
5701         (linux_nat_wait_1): Always use status_callback to look for an LWP
5702         with a pending status.  Use linux_resume_one_lwp.
5703         (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
5704         linux_resume_one_lwp.
5705
5706 2015-01-09  Pedro Alves  <palves@redhat.com>
5707
5708         * breakpoint.c (bp_location_inserted_here_p): New function,
5709         factored out from ...
5710         (breakpoint_inserted_here_p): ... here.  Use
5711         ALL_BP_LOCATIONS_AT_ADDR.
5712         (software_breakpoint_inserted_here_p): Use
5713         bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
5714
5715 2014-01-09  Pedro Alves  <palves@redhat.com>
5716
5717         Skip enabling event reporting if the kernel supports
5718         PTRACE_EVENT_CLONE.
5719         * linux-thread-db.c: Include "nat/linux-ptrace.h".
5720         (thread_db_use_events): New function.
5721         (try_thread_db_load_1): Check thread_db_use_events before enabling
5722         event reporting.
5723         (update_thread_state): New function.
5724         (attach_thread): Use it.  Check thread_db_use_events before
5725         enabling event reporting.
5726         (thread_db_detach): Check thread_db_use_events before disabling
5727         event reporting.
5728         (find_new_threads_callback): Check thread_db_use_events before
5729         enabling event reporting.  Update the thread's state if not using
5730         libthread_db events.
5731
5732 2015-01-09  Pedro Alves  <palves@redhat.com>
5733
5734         * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
5735         about to wait for is > 0.
5736         * linux-thread-db.c (find_new_threads_callback): Ignore thread if
5737         the kernel thread ID is -1.
5738
5739 2015-01-09  Pedro Alves  <palves@redhat.com>
5740
5741         * linux-nat.c (attach_proc_task_lwp_callback): New function.
5742         (linux_nat_attach): Use linux_proc_attach_tgid_threads.
5743         (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
5744         ptrace option flags.
5745         * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
5746         field.
5747         * nat/linux-procfs.c: Include <dirent.h>.
5748         (linux_proc_get_int): New parameter "warn".  Handle it.
5749         (linux_proc_get_tgid): Adjust.
5750         (linux_proc_get_tracerpid): Rename to ...
5751         (linux_proc_get_tracerpid_nowarn): ... this.
5752         (linux_proc_pid_get_state): New function, factored out from
5753         (linux_proc_pid_has_state): ... this.  Add new parameter "warn"
5754         and handle it.
5755         (linux_proc_pid_is_gone): New function.
5756         (linux_proc_pid_is_stopped): Adjust.
5757         (linux_proc_pid_is_zombie_maybe_warn)
5758         (linux_proc_pid_is_zombie_nowarn): New functions.
5759         (linux_proc_pid_is_zombie): Use
5760         linux_proc_pid_is_zombie_maybe_warn.
5761         (linux_proc_attach_tgid_threads): New function.
5762         * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
5763         (linux_proc_get_tracerpid): Rename to ...
5764         (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
5765         (linux_proc_pid_is_gone): New declaration.
5766         (linux_proc_pid_is_zombie): Update comment.
5767         (linux_proc_pid_is_zombie_nowarn): New declaration.
5768         (linux_proc_attach_lwp_func): New typedef.
5769         (linux_proc_attach_tgid_threads): New declaration.
5770         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
5771         use nowarn functions.
5772         (linux_ptrace_attach_fail_reason_string): Move here from
5773         gdbserver/linux-low.c and rename.
5774         (ptrace_supports_feature): If the current ptrace options are not
5775         known yet, check them now, instead of asserting.
5776         * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
5777         Declare.
5778
5779 2015-01-09  Pedro Alves  <palves@redhat.com>
5780
5781         * linux-thread-db.c (thread_db_find_new_threads_silently)
5782         (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
5783         (find_new_threads_once): Print debug output on gdb_stdlog.
5784
5785 2015-01-09  Chen Gang  <gang.chen.5i5j@gmail.com>
5786             Pedro Alves  <palves@redhat.com>
5787
5788         * compile/compile.c: Include "gdb_wait.h".
5789         (do_rmdir): Check return value, and free 'zap'.
5790
5791 2015-01-08  Pedro Alves  <palves@redhat.com>
5792             Yao Qi  <yao@codesourcery.com>
5793
5794         * dwarf2loc.c (indirect_pieced_value): Don't call
5795         gdb_sign_extend.  Call extract_signed_integer instead.
5796         * utils.c (gdb_sign_extend): Remove.
5797         * utils.h (gdb_sign_extend): Remove declaration.
5798
5799 2015-01-07  Pierre Muller  <muller@sourceware.org>
5800
5801         PR symtab/17811
5802         * stabsread.c (define_symbol): Set language for C++ special symbols.
5803
5804 2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>
5805
5806         * inflow.c (initial_gdb_ttystate): Tweak comment.
5807
5808 2015-01-07  Joel Brobecker  <brobecker@adacore.com>
5809
5810         * inflow.c (set_initial_gdb_ttystate): Add empty line after
5811         comment documenting function.
5812
5813 2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>
5814
5815         * terminal.h (set_initial_gdb_ttystate): Declare.
5816         * inflow.c (initial_gdb_ttystate): New static variable.
5817         (set_initial_gdb_ttystate): New setter.
5818         (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
5819         instead of our current terminal state.
5820         * top.c (gdb_init): Call set_initial_gdb_ttystate.
5821
5822 2015-01-07  Joel Brobecker  <brobecker@adacore.com>
5823
5824         * guile/scm-type.c (tyscm_array_1): Add comment.
5825         * python/py-type.c (typy_array_1): Add comment.
5826
5827 2015-01-06  Joel Brobecker  <brobecker@adacore.com>
5828
5829         * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
5830         error if N2 is equal to N1 - 1.
5831
5832 2015-01-06  Joel Brobecker  <brobecker@adacore.com>
5833
5834         * python/py-type.c (typy_array_1): Do not raise negative-length
5835         exception if N2 is equal to N1 - 1.
5836
5837 2015-01-03  Doug Evans  <xdje42@gmail.com>
5838
5839         * c-exp.y: Whitespace cleanup.
5840         (classify_inner_name): Remove extra ;.
5841
5842 2015-01-02  Maciej W. Rozycki  <macro@codesourcery.com>
5843
5844         * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
5845         offset signed.
5846
5847 2015-01-02  Doug Evans  <dje@google.com>
5848
5849         * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
5850
5851 2015-01-02  Doug Evans  <dje@google.com>
5852
5853         * symtab.h (struct symbol): Fix typo in comment.
5854
5855 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
5856
5857         Update year range in copyright notice of all files.
5858
5859 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
5860
5861         * top.c (print_gdb_version): Update copyright year to 2015.
5862
5863 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
5864
5865         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
5866
5867 For older changes see ChangeLog-2014.
5868 \f
5869 Local Variables:
5870 mode: change-log
5871 left-margin: 8
5872 fill-column: 74
5873 version-control: never
5874 coding: utf-8
5875 End: