1 Fri Oct 16 15:31:38 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
3 * m32r-tdep.c (decode_prologue): Return failure if we reach
4 the end of the function without finding the end of the prologue.
6 1998-10-16 Jason Molenda (jsm@bugshack.cygnus.com)
8 * command.c copying.c copying.awk core-aout.c core-regset.c
9 corelow.c dcache.c i386-tdep.c i386v4-nat.c i387-tdep.c
10 infcmd.c infptrace.c infrun.c remote.c solib.c symfile.c
11 symmisc.c valarith.c: Add prototypes.
13 * defs.h: Add prototype for utils.c::do_run_cleanups.
15 * gdbtypes.c: Add prototypes.
16 (make_pointer_type): Add braces to remove nested if-else ambiguity.
17 (make_reference_type): Ditto.
19 * printcmd.c (printf_command): Initialize 'f' and 'string' at
20 function startup to suppress possibly-used-before-initialized warning.
22 * remote-utils.c: Add prototypes.
23 (sr_pollchar): Add braces to remove nested if-else ambiguity.
25 * ser-tcp.c: Add prototypes.
26 (wait_for): Add braces to remove nested if-else ambiguity.
27 (tcp_readchar): Ditto.
29 * ser-unix.c: Add prototypes.
30 (get_tty_state): Don't define errno here.
31 (hardwire_readchar): Only define 't' if we are compiling in a Cygwin
34 * symtab.c: Add prototypes.
35 (find_methods): Add braces to remove nested if-else ambiguity.
36 (search_symbols): Set 'i' to an initial value to suppress a
37 possibly-used-before-initialized warning.
39 * valops.c: Add prototypes.
40 (value_cast): Set 'eltype2' to an initial value to suppress a
41 possibly-used-before-initialized warning.
42 (value_of_variable): Add braces to remove nested if-else ambiguity.
43 (value_of_this): Ditto.
45 * valprint.c: Add prototypes.
46 (print_floating): Add braces to remove nested if-else ambiguity.
48 Thu Oct 15 19:50:48 1998 Stan Shebs <shebs@andros.cygnus.com>
50 * tm-sp64.h (SETUP_ARBITRARY_FRAME, RAME_SPECIFICATION_DYADIC):
51 Remove, nevermore used.
53 Thu Oct 15 16:55:00 1998 Andrew Cagney <cagney@b1.cygnus.com>
55 * command.c: Include "wait.h" after, rather than before, <wait.h>.
56 "wait.h" was defining all WIF* macro's instead of filling in those
59 1998-10-14 Jason Molenda (jsm@bugshack.cygnus.com)
61 * defs.h: Move _initialize_printcmd, _initialize_stack,
62 _initialize_blockframe out of here and in to their respective .c
64 * blockframe.c: Move _initialize_blockframe prototype to here.
65 * printcmd.c: Move _initialize_printcmd prototype to here.
66 * stack.c: Move _initialize_stack prototype to here.
68 * source.c, symtab.h: Move _initialize_source prototype to the .c
70 * values.c, value.h: Move _initialize_values prototype to the .c file.
71 * gdbthread.h, thread.c: Move _initialize_thread prototype to the .c
73 * breakpoint.c, breakpoint.h: Move _initialize_breakpoint prototype
76 * abug-rom.c alpha-nat.c alpha-tdep.c annotate.c ax-gdb.c bcache.c:
77 Standardize comments for the prototype section of these files.
79 * configure.in: Look in libc for wctype before looking for it in libc.
81 Tue Oct 13 18:56:51 1998 Felix Lee <flee@cygnus.com>
83 * sol-thread.c (ps_pstop, etc): simple test for proc_service.h
84 version didn't work for sol2.6; pushed it to autoconf.
85 * configure.in (gdb_cv_proc_service_is_old): new test.
86 * acconfig.h (PROC_SERVICE_IS_OLD): new define.
87 * configure, config.in: regenerate.
89 1998-10-13 Jason Molenda (jsm@bugshack.cygnus.com)
91 * blockframe.c (find_pc_sect_partial_function): Add braces to avoid
92 possible nested-if confusion.
93 * breakpoint.c (breakpoint_here_p): Ditto.
94 (breakpoint_inserted_here_p): Ditto.
95 (breakpoint_thread_match): Ditto.
97 * gnu-regex.c: Define _REGEX_RE_COMP only if it isn't already defined.
98 * gnu-regex.h: Define _REGEX_RE_COMP to pick up old compatability
101 * symtab.h: Add prototype for _initialize_source.
102 * value.h: Add prototype for _initialize_value.
104 * defs.h: Include sys/types.h or stddef.h to get size_t.
105 (make_cleanup): Add make_cleanup_func typedef and switch to using
106 a prototype for this function.
107 (mfree): Add prototypes for mmalloc, mrealloc, mfree if we aren't
110 * ax-gdb.c breakpoint.c coffread.c corelow.c dbxread.c dwarf2read.c
111 dwarfread.c elfread.c eval.c exec.c gdbtk-cmds.c gdbtk.c infcmd.c
112 infrun.c mipsread.c nlmread.c os9kread.c parse.c printcmd.c symfile.c
113 symmisc.c symtab.c thread.c top.c tracepoint.c typeprint.c valops.c:
114 Cast parameters passed to make_cleanup to use the new
115 make_cleanup_func typedef.
117 Tue Oct 13 00:51:48 1998 Felix Lee <flee@cygnus.com>
119 * sol-thread.c (ps_pstop, etc): different solaris versions have
120 slightly different prototypes in proc_service.h; compensate.
122 1998-10-12 Jason Molenda (jsm@bugshack.cygnus.com)
124 * Makefile.in (AWK): Unused; remove.
125 * configure.in: Remove unused autoconf checks for MINIX, memcpy,
126 poll, select, strings.h.
127 * config.in: Regenerated.
128 * configure: Regenerated.
130 1998-10-12 Jason Molenda (jsm@bugshack.cygnus.com)
132 * configure.in: Check for sys/debugreg.h, asm/debugreg.h.
133 * i386v-nat.c: Include asm/debugreg.h, sys/debugreg.h if it is not
136 Sun Oct 11 12:08:07 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
138 * dwarf2read.c (dwarf2_build_psymtabs_hard): Do not adjust the
139 address range of a compilation unit without children.
141 * mdebugread.c (parse_partial_symbols): Fix handling of stabs
142 continuations, use xmalloc and xrealloc.
144 Fri Oct 9 18:14:43 1998 Mark Alexander <marka@cygnus.com>
146 * rs6000-tdep.c: Don't include tm.h twice.
148 1998-10-08 Keith Seitz <keiths@cygnus.com>
150 * main.c (main): Remove calls to {pre,post}_add_symbol_hooks.
151 There should be sufficient information/hooks now to eliminate
154 * exec.c (file_command): Add a new hook here to inform ui's
155 when the exec file has changed. Adding it here allows the
156 ui to be informed after symbol reading.
158 * gdbcore.h: Add declaration of file_changed_hook.
160 Thu Oct 8 08:40:42 1998 Mark Alexander <marka@cygnus.com>
162 * rs6000-tdep.c (get_saved_register): Define only if
163 USE_GENERIC_DUMMY_FRAMES is defined.
166 Tue Oct 6 21:35:10 1998 Andrew Cagney <cagney@b1.cygnus.com>
168 * configure.in (--enable-targets): New config option. Code taken
169 from ../opcode/configure.in.
170 start-sanitize-cygnus
171 (--enable-carp): New config option. Overrides configure.tgt and
172 sets gdb_target + gdb_target_cpu to carp. XXX - this is tempoary.
174 * configure: Re-generate.
176 * Makefile.in (DEPFILES): Add TARGET_OBS.
177 (TARGET_OBS): Defined by configure.
179 start-sanitize-cygnus
180 * config/carp/carp.mt, config/carp/tm-carp.h: Pseudo configuration
181 for carp target. XXX - this is tempoary.
185 1998-10-06 Jason Molenda (jsm@bugshack.cygnus.com)
187 Eliminate a few warnings from the compiler.
188 * breakpoint.h: Add prototype.
189 * breakpoint.c (do_enable_breakpoint): cast mem_cnt, i to (void).
190 * configure.in: Check if strdup declaration is necessary.
191 * configure: Regenerated.
192 * defs.h: Add prototypes.
193 * gdb_string.h: Only define strdup if necessary.
194 * gdbthread.h: Add prototypes.
195 * printcmd.c: Add prototyptes.
196 (disassemble_command): Remove unused variable 'section'.
197 * symtab.c: Add prototypes.
198 * symtab.h: Include gnu-regex.h, add prototype.
199 * thread.c: Add prototype.
201 Mon Oct 5 19:44:39 1998 Stan Shebs <shebs@andros.cygnus.com>
203 From David Purves <purves@apogee.com>:
204 * stabsread.c (rs6000_builtin_type): Create a complex float instead
206 (read_sun_floating_type): Similarly.
207 (read_range_type): Create a complex float if self_subrange is
210 Fri Oct 2 19:42:31 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
212 * c-lang.c (emit_char c_printchar c_printstr), c-lang.h (c_printstr)
213 ch-lang.c (chill_printstr chill_printchar) c-valprint.c (c_val_print)
214 ch-valprint.c (chill_val_print) expprint.c (print_subexp) f-lang.c
215 (f_printstr f_printchar emit_char) f-valprint.c (f_val_print) jv-lang.c
216 (java_printchar java_emit_char) jv-valprint.c (java_value_print
217 java_val_print) language.c (unk_lang_printchar unk_lang_printstr
218 unk_lang_emit_char) language.h (struct language_defn LA_PRINT_STRING
219 LA_EMIT_CHAR) m2-lang.c (m2_printstr m2_printchar emit_char) printcmd.c
220 (print_formatted) scm-lang.c (scm_printstr) valprint.c
221 (val_print_string) value.h (val_print_string): Add emit_char routines
222 to language_desc struct to allow finer control over language specific
223 character output issues. Add character width arg to printstr routines
224 to allow handling of wchar_t/Unicode strings. Fix c_printstr to handle
225 wide characters. Supply width argument to LA_PRINT_STRING and
228 * jv-lang.c (java_object_type dynamics_objfile java_link_class_type
229 get_dynamics_objfile get_java_object_type) jv-lang.h
230 (get_java_object_type): Make lots of things static.
232 * expprint.c (dump_prefix_expression dump_subexp): Move opcode name
233 printing to common routine (op_name).
234 * (dump_subexp): Add support for OP_SCOPE.
236 Fri Oct 2 16:25:54 1998 Stan Shebs <shebs@andros.cygnus.com>
238 * configure.host (i[3456]86-*-windows): Remove, no longer used.
239 * mswin: Remove directory, no longer used.
241 Fri Oct 2 18:52:20 1998 Fernando Nasser <fnasser@cygnus.com>
243 * sol-thread.c: Fixed prototypes and calls to supply_fpregset and
246 1998-10-02 Keith Seitz <keiths@cygnus.com>
248 * remote.c (remote_interrupt): Rewrite to use remote_stop.
249 (remote_interrupt_twice): Remove. remote_stop now handles it.
250 (remote_stop): New function which handles interrupting the
251 remote target so that CLUI and GUI use the same core functions
252 to achieve the same goal.
253 (remote_wait): Change to handle remote_stop properly.
254 [interrupted_already]: New static global to help remote_stop.
255 [remote_ops, extended_remote_ops]: Add remote_stop for to_stop member.
257 * target.c: Rename static function "ignore" to "target_ignore" and
258 export it so that gdb can determin if some target vector member is
259 actually not defined. Replace all occurances of ignore.
261 * target.h: Export target_ignore.
263 Fri Oct 2 03:51:48 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
265 * target.c (target_xfer_memory): Handle requests with zero
266 transfer length right away.
268 * values.c (unpack_double): Set up code, length and signedness of
269 type _after_ checking for typedef.
271 Thu Oct 1 15:39:27 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
273 * breakpoint.c (bpstat_stop_status): Do not consider an
274 untripped watchpoint as a "hit".
276 Thu Oct 1 20:52:39 1998 Andrew Cagney <cagney@b1.cygnus.com>
278 * exec.c (exec_file_command), convex-tdep.c (exec_file_command),
279 arm-xdep.c (exec_file_command), remote-rdp.c
280 (remote_rdp_create_inferior), remote-os9k.c
281 (rombug_create_inferior), remote-mm.c (mm_create_inferior),
282 remote-eb.c (eb_create_inferior), remote-es.c
283 (es1800_create_inferior), remote-rdi.c (arm_rdi_create_inferior),
284 remote-sim.c (gdbsim_create_inferior), remote-utils.c
285 (gr_create_inferior), remote-st.c (st2000_create_inferior),
286 remote-nindy.c (nindy_create_inferior), remote-hms.c
287 (hms_create_inferior), remote-e7000.c (e7000_create_inferior),
288 remote-array.c (array_create_inferior), remote-adapt.c
289 (adapt_create_inferior): Replace "exec" with "executable" in
292 1998-09-25 Keith Seitz <keiths@cygnus.com>
294 * rdi-share/unixcomm.c: If using cygwin32, also use the SERPORT and
295 PARPORT defines for win32.
296 (Unix_MatchValidSerialDevice): For cygwin32, valid serial port names
297 start with "com", not "/dev/tty".
298 (Unix_OpenSerial): Do not use O_NONBLOCK on cygwin32.
300 * rdi-share/devsw.c (DevSW_Close): Free the device's state (SwitcherState)
301 so that the device may be reopened.
303 * remote-rdi.c (mywritec): Send all output through gdb's *_unfiltered
304 functions, ignoring non-ASCII chars, so that non-tty UI's can snarf
305 the output from fputs_hook.
307 (arm_rdi_open): Set inferior_pid.
308 (arm_rdi_detach): Pop the target off the target stack so that
309 users can attach and detach multiple times.
310 (arm_rdi_close): Close the opened device and reset inferior_pid, too.
312 1998-09-24 Jason Molenda (jsm@bugshack.cygnus.com)
314 * configure.in: Change --enable-warnings to --enable-build-warnings.
315 * configure: Updated.
317 1998-09-24 Jason Molenda (jsm@bugshack.cygnus.com)
319 * configure.in (WARN_CFLAGS): Add -Wmissing-prototypes.
320 * configure: Regenerated.
322 1998-09-24 Jason Molenda (jsm@bugshack.cygnus.com)
324 * configure.in: Add --enable-warnings.
325 Adjust whitespace of other --with and --enable options so that
326 configure --help lines up correctly.
328 * Makefile.in (WARN_CFLAGS): Add. Set by configure.
329 * configure: Regenerated.
331 Thu Sep 24 15:44:34 1998 Stan Shebs <shebs@andros.cygnus.com>
333 * remote-rdi.c: Fix formatting, remove some commented-out code.
334 (init_rdi_ops): Omit needless initializations.
336 Wed Sep 23 18:21:03 1998 Andrew Cagney <cagney@b1.cygnus.com>
338 * remote.c (remote_address_masked): New function - mask address
339 according to REMOTE_ADDRESS_SIZE.
340 (remote_address_size): New global.
341 (hexnumstr): New function - convert arbitrary unsigned to hex.
342 (remote_write_bytes, remote_read_bytes): Use hexnumstr to
343 construct packet address. Mask address when necessary.
344 (_initialize_remote): Add "set remoteaddresssize" command, set
345 REMOTE_ADDRESS_SIZE variable.
349 Wed Sep 23 18:08:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
351 * remote.c (_initialize_remote, packet_command, print_packet):
354 Wed Sep 23 12:32:54 1998 <cagney@amy.cygnus.com>
356 * remote.c (packet_command): Test REMOTE_DESC to determine if
357 remote connection is open.
359 Tue Sep 22 22:27:24 1998 Mark Alexander <marka@cygnus.com>
361 Patch from Dawn Perchik <dawn@cygnus.com>:
362 * rs6000-tdep.c (pop_frame): Handle generic dummy frames.
363 (push_arguments): Likewise.
364 (frame_saved_pc): Likewise.
365 (rs6000_frame_chain): Likewise.
366 (ppc_push_return_address): New function.
367 (get_saved_register): New function.
368 * config/powerpc/tm-ppc-eabi.h: Add generic dummy frame macros.
370 Mon Sep 21 19:29:32 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
372 * defs.h utils.c (fputc_filtered): New function. Does the obvious...
373 * jv-lang.c (java_printchar): Fix output of chars > 0xff. Fold
374 java_emit_char into java_printchar.
375 * language.h (PRINT_LITERAL_FORM): Reformat for readability.
377 Mon Sep 21 14:38:03 1998 Catherine Moore <clm@cygnus.com>
379 * config/arm/tm-arm.h (*_BREAKPOINT): Define both little endian
380 and big endian breakpoint patterns.
382 * arm-tdep.c (arm_break_point_from_pc): Insert either big endian
383 or little endian breakpoints depending upon target byte order.
386 Sun Sep 20 23:11:41 1998 Ron Unrau <runrau@cygnus.com>
388 * incorporate SKY-B changes (makes dual maintenance easier).
389 * txvu-tdep.c (check_overlap): new function to guarantee that
390 overlays are either mapped or unmapped in their entirety.
391 * txvu-tdep.c (compress_blockvector): compress blockvectors correctly
394 Fri Sep 18 07:53:08 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
396 * sol-thread.c (sol_thread_notice_signals): Use PIDGET when
397 passing pid down to procfs_notice_signals.
399 Wed Sep 16 14:57:14 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
401 * stabsread.c (resolve_symbol_reference): Return 1 on success, 0 on
403 * (define_symbol): Check return value from resolve_symbol_reference,
404 and drop symbol if it fails.
406 Tue Sep 15 15:24:16 1998 Stu Grossman <grossman@fencer.cygnus.com>
408 * stabsread.c: Make all complaints static.
409 * Fix formatting of live range splitting code.
410 * (resolve_symbol_reference define_symbol resolve_live_range): Change
411 errors to complaints so that bad live range symbols won't abort the
412 entire symbol table. Handle errors by aborting just the current
414 * (ref_init): Goes away. Folded into ref_add().
415 * (REF_MAP_SIZE): Put parens around parameter so that args like
416 `1 + 2' get handled correctly (yes, this was a real bug).
417 * (ref_add): Remove check for allocation failures. Not necessary
418 when using xrealloc(). Fix pointer arithmetic problem when clearing
419 memory. This and the previous patch prevent random SEGV's when there
420 are lots of live range symbols.
422 Tue Sep 15 14:02:01 1998 Nick Clifton <nickc@cygnus.com>
424 * remote-rdi.c: Prevent multiple attempts to close the remote
427 Tue Sep 15 10:24:17 1998 Andrew Cagney <cagney@b1.cygnus.com>
429 * printcmd.c (examine_i_type): New static - type for instructions.
430 (do_examine): For "i" format, specify examine_i_type.
431 (do_examine): Call value_at_lazy instead of value_at so that
432 examine data is only fetched if it is used.
433 (x_command): If examine data was not fetched, set convenience
434 variable "__" to void.
435 (_initialize_printcmd): Initialize examine_i_type.
437 Sun Sep 13 01:34:59 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
439 * blockframe.c (find_pc_sect_partial_function): use bfd section
440 of msymbol for end of section comparison.
442 Fri Sep 11 14:02:49 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
444 * tracepoint.c: clean up several unused variables and such.
446 Fri Sep 11 12:38:34 EDT 1998 Zdenek Radouch (radouch@cygnus.com)
448 * arm-tdep.c (arm_push_arguments): fixed frame construction
450 Thu Sep 10 20:51:23 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
452 * mn10300-tdep.c (mn10300_analyze_prologue): guard against NULL.
454 Wed Sep 9 19:37:36 1998 Stan Shebs <shebs@andros.cygnus.com>
456 * dbxread.c (IGNORE_SYMBOL): Remove definition, is never used.
457 * os9kread.c: Remove comment mentioning IGNORE_SYMBOL.
459 Wed Sep 9 11:39:05 1998 Ron Unrau <runrau@cygnus.com>
461 * blockframe.c(find_pc_sect_partial_function): look for min syms in
462 the same section when trying to guess the end of a function.
463 * symfile.c(list_overlays_command): use print_address_numeric
464 * remote-sim.c: export simulator_command
466 * tm-r5900.h: add COP0 registers
469 * txvu-tdep.c: printvector and printvector-order commands
470 * tm-txvu.h: add COP0 registers
471 * mips-tdep.c: use NUM_CORE_REGS
474 1998-09-08 Jason Molenda (jsm@bugshack.cygnus.com)
476 * breakpoint.c (bpstat_stop_status): Declare a bp match if the
477 current fp matches the bp->fp OR if the current fp is less than
478 the bp->fp if we're looking at a bp_step_resume breakpoint.
480 Tue Sep 8 19:42:58 1998 Stan Shebs <shebs@andros.cygnus.com>
482 * symtab.h (struct symtab): Remove EXTRA_SYMTAB_INFO hook,
484 * symfile.c (allocate_symtab): Deprecate use of
485 INIT_EXTRA_SYMTAB_INFO here.
487 Fri Sep 4 15:33:25 1998 Stan Shebs <shebs@andros.cygnus.com>
489 * README: Update remote debugging and testsuite info.
491 Thu Sep 3 13:50:20 1998 Mark Alexander <marka@cygnus.com>
493 * config/mn10300/tm-mn10300.h (FP_REGNUM): Redefine to be a
494 pseudo-register, not the same as a3.
495 (D2_REGNUM, D3_REGNUM, A2_REGNUM, A3_REGNUM): Define.
496 * mn10300-tdep.c (fix_frame_pointer): New function.
497 (set_movm_offsets): Use register number macros instead of
498 hard-coded constants.
499 (mn10300_analyze_prologue): Fix to handle redefinition of FP_REGNUM.
500 (mn10300_frame_chain): Fix to handle redefinition of FP_REGNUM;
501 use register number macros instead of hard-coded constants;
502 add missing parameter to call of mn10300_analyze_prologue.
503 (mn10300_frame_saved_pc): Use register number macros instead of
504 hard-coded constants.
506 Tue Sep 1 12:04:57 EDT 1998 Zdenek Radouch (radouch@cygnus.com)
508 Changes to support/fix ARM/ELF port. Use MAKE_MSYMBOL_SPECIAL for
510 * elfread.c (elf_symtab_read): use ELF specific macro
511 * coffread.c (coff_symtab_read): use COFF_MAKE_MSYMBOL_SPECIAL()
512 * arm-tdep.c: separate COFF and ELF thumb processing
513 disable --mapcs-float processing
514 * dwarf2read.c: Disabled building of minimal symbols
515 * config/arm/tm-arm.h: new macros for distinguishing arm/thumb
516 * config/mips/tm-mips.h: use ELF specific macro
518 Mon Aug 31 15:42:10 1998 Tom Tromey <tromey@cygnus.com>
520 * top.c (context_hook): Define.
522 Tue Aug 25 13:21:58 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
524 * ax-gdb.c (gen_var_ref): Allow for typedef types.
525 (gen_cast, gen_bitfield_ref, gen_expr, gen_deref): ditto.
527 Mon Aug 24 18:29:03 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
529 * tracepoint.c (collect_symbol): Handle register doubles that
530 are stored in two registers.
532 Mon Aug 24 14:39:08 1998 Mark Alexander <marka@cygnus.com>
534 * sh-stub.c (undoSStep): Improve comment.
535 * sparc-tdep.c (sparc_extract_struct_value_address): Simplify to use
536 same method on both 32-bit and 64-bit machines.
537 * sparcl-tdep.c (sparclite_check_watch_resources): Simulator doesn't
538 support hardware breakpoints.
539 * config/sparc/tm-sparc.h (CALL_DUMMY): Improve comments.
541 1998-08-20 Jason Molenda (jsm@bugshack.cygnus.com)
543 * rdi-share/Makefile.am (INCLUDES): Fix typeo.
544 * rdi-share/Makefile.in: Regenerated.
546 1998-08-19 Jason Molenda (jsm@bugshack.cygnus.com)
548 * rdi-share/Makefile.am: Use just `INCLUDES' not `libname_INCLUDES'.
549 * rdi-share/Makefile.in: Regenerated.
551 1998-08-19 Keith Seitz <keiths@cygnus.com>
553 * v850ice.c (v850ice_stop): New function to stop the ICE.
554 (v850ice_load) Pass filename to ICE DLL.
555 (ice_stepi, ice_nexti, ice_cont): Do not directly call the gdb
556 commands -- let the GUI do it so that it can retain control
559 Wed Aug 19 15:53:52 1998 Anthony Green <green@hoser.cygnus.com>
561 * i386v4-nat.c: Include sys/reg.h if present.
563 Wed Aug 19 03:07:53 1998 Richard Henderson <rth@cygnus.com>
565 * config/alpha/alpha-linux (XDEPFILES): Build ser-tcp.
567 1998-08-18 Fernando Nasser <fnasser@totem.to.cygnus.com>
569 * symtab.c (decode_line_1): For minimal symbol, SKIP_PROLOG to
570 make sure we stop after the frame pointer is locaded and backtrace
571 prints an accurate stack. Complements changes made on Mon Jul 27
573 (decode_line_2): Replaced the whitespace after ">" in a prompt
574 which has been taken away by changes made on Sun Jul 19 02:11:45
577 1998-08-18 Keith Seitz <keiths@cygnus.com>
579 * stack.c: Define new hook, selected_frame_level_changed_hook, which
580 will be called whenever the selected stack level changes.
581 (select_frame): Call the selected_frame_level_changed_hook.
583 Tue Aug 18 18:03:42 1998 Stan Shebs <shebs@andros.cygnus.com>
585 * remote-rdi.c (arm_rdi_open): Pass serial device name to
586 Adp_OpenDevice, and include it in error reports.
588 1998-08-18 Jason Molenda (jsm@bugshack.cygnus.com)
590 * configure.in: Add more header files to AC_CHECK_HEADERS.
591 * configure: Regenerated.
593 * command.c: Include wait.h or sys/wait.h if present.
595 * core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
597 * infptrace.c: Ditto.
599 * expprint.c: Include ctype.h for isprint prototype.
600 * i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
601 * i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if
602 present, based on autoconf test.
604 * utils.c: Include curses.h and term.h if present.
605 (puts_debug): Change 'carriage_return' local variable to return_p
608 * config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
609 determine it with autoconf.
610 * config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
612 * config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it
614 * config/i386/nm-i386v.h: Ditto.
615 * config/i386/nm-symmetry.h: Ditto.
616 * config/m88k/xm-cxux.h: Ditto.
617 * config/m88k/xm-dgux.h: Ditto.
619 * config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
620 * config/m68k/nm-delta68.h: Removed.
622 Fri Aug 14 11:14:03 1998 Jeffrey A Law (law@cygnus.com)
624 * mn10300-tdep.c (set_movm_offsets): Change second argument to
625 be the actual args to movm itself. All callers changed. Only set
626 fi->fsr.regs[x] if reg X is saved by the movm instruction.
628 Fri Aug 14 04:18:23 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
630 * sol-thread.c (lwp_to_thread): Fix error message for failing
631 td_ta_map_lwp2thr call.
632 (ps_lgetLDT): Mask off upper bits in GS register when comparing
635 Wed Aug 12 16:30:01 1998 Frank Ch. Eigler <fche@cygnus.com>
637 * remote-sim.c (simulator_command): Reset register cache after
640 Wed Aug 12 09:00:26 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
642 * expprint.c (dump_prefix/postfix_expression): Don't try to print type
645 Tue Aug 11 11:33:25 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
647 * c-typeprint.c (c_print_type): Don't crash if varstring is null.
648 * expprint.c expression.h (dump_expression): Rename to
649 dump_prefix_expression.
650 * Print out the expression in normal form. Call print_longest
651 instead of trying to do it ourselves.
652 * (dump_postfix_expression): New function, prints out the expression
653 with indentation and better formatting and interpretation.
654 * parse.c (parse_exp_1): Put calls to dump expressions under ifdef
655 MAINTENANCE_CMDS and expressiondebug variable.
657 Thu Aug 6 13:20:02 1998 Ron Unrau <runrau@cygnus.com>
659 * infrun.c (wait_for_inferior): use stop_func_name instead of
660 stop_func_start to decide that no debug info exists.
663 Thu Aug 6 13:15:05 1998 Ron Unrau <runrau@cygnus.com>
665 * txvu-tdep.c: add VU0/1 control registers
666 * config/mips/tm-txvu.h: ditto
668 Tue Aug 4 11:02:50 1998 Ron Unrau <runrau@cygnus.com>
670 * txvu-tdep.c (txvu_insert_breakpoint): make sure CPU context is
671 set to correct VU memory space.
672 (txvu_remove_breakpoint): use this instead of txvu_breakpoint_from_pc
673 * config/tm-txvu.h: use new track-table address
674 Do note define BREAKPOINT_FROM_PC anymore
676 Fri Jul 31 16:06:05 1998 Ron Unrau <runrau@cygnus.com>
678 * config/tm-txvu.h: use NUM_CORE_REGS instead of NUM_R5900_REGS
679 * mips-tdep.c: use NUM_CORE_REGS
680 * txvu-tdep.c: use NUM_CORE_REGS, add function prototypes
681 (txvu_insert_breakpoints): use VIF interrupt bit
684 Thu Jul 30 13:53:50 1998 Mark Alexander <marka@cygnus.com>
686 * mips-tdep.c (mask_address_p): New variable.
687 (mips_addr_bits_remove): Test mask_address_p to decide whether
688 to mask off the upper 32 bits of addresses.
689 (_initialize_mips_tdep): Add command to set mask_address_p.
690 (mips_call_dummy_address): New function.
691 * config/mips/tm-mips.h (CALL_DUMMY_ADDRESS): Redefine to
692 call mips_call_dummy_address.
694 1998-07-29 Fernando Nasser <fnasser@totem.to.cygnus.com>
696 * symfile.c (add_symbol_file_command): Test for the from_tty
697 parameter and avoid query when not interactive.
700 Wed Jul 29 10:39:29 1998 Jeffrey A Law (law@cygnus.com)
702 * mn10300-tdep.c (set_movm_offsets): Do nothing for the am33
703 registers if we are not in am33 mode.
704 (mn10300_frame_chain, mn10300_frame_saved_pc): Similarly.
705 (set_machine_hook): Keep track of whether or not we're in am33 mode.
708 Mon Jul 27 16:11:42 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
710 * tracepoint.c (remote_set_transparent_ranges): new function.
711 Send the start and end addresses of all loadable read-only
712 sections down to the trace target, so that it can treat them
713 as "transparent" (ie. don't care if they were collected or not).
715 Mon Jul 27 15:38:07 1998 Mark Alexander <marka@cygnus.com>
717 * mn10300-tdep.c (mn10300_analyze_prologue): Undo previous fix
718 for setting frame address in optimized code; made unnecessary
721 Mon Jul 27 10:45:56 1998 Martin M. Hunt <hunt@cygnus.com>
723 * symtab.c (decode_line_1): For minimal symbol, call
724 find_pc_sect_line() to make sure the line number gets set
726 (print_symbol_info): Redeclare function void.
728 1998-07-27 Jason Molenda (jsm@bugshack.cygnus.com)
730 * config/d10v/tm-d10v.h (REGISTER_NAMES): sp -> r15. The
731 stack pointer et al are synthesized from the SP_REGNUM (etc)
732 defines and should not be mentioned in REGISTER_NAMES.
735 Mon Jul 27 08:54:41 1998 Jeffrey A Law (law@cygnus.com)
737 * mn10300-tdep.c (mn10300_frame_chain): Account for space saved
738 by am33 register saves.
739 (mn10300_frame_saved_pc): Similarly.
742 Fri Jul 24 14:41:19 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
744 * tracepoint.c (encode_actions): Treat register names and simple
745 variable names as special cases and don't convert them to byte-
746 codes: these things can be collected far more efficiently
747 without invoking the bytecode interpreter.
749 Fri Jul 24 13:32:46 1998 Mark Alexander <marka@cygnus.com>
751 * config/i386/tm-i386.h (STORE_STRUCT_RETURN): Make it
752 work on hosts of any endianness.
753 * config/i386/tm-i386v.h: Ditto.
755 Fri Jul 24 07:41:12 1998 Mark Alexander <marka@cygnus.com>
757 * mn10300-tdep.c (set_movm_offsets): New helper function
758 for mn10300_analyze_prologue.
759 (mn10300_analyze_prologue): Simplify by factoring out common code.
760 Fix bugs in setting frame address for optimized code.
761 Use read_memory_nobpt instead of target_read_memory.
763 Thu Jul 23 17:01:17 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
765 * tracepoint.c (collect_symbol): handle LOC_ARG case.
767 Thu Jul 23 15:07:40 1998 Dawn Perchik <dawn@cygnus.com>
769 * sparc-tdep.c (sparc_init_extra_frame_info): Recognize when we're
770 in a function prologue before the SAVE instruction.
771 (sparc_frame_saved_pc): Ditto.
772 * config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): Add in_prologue flag.
774 Thu Jul 23 14:58:09 1998 Dawn Perchik <dawn@cygnus.com>
776 * i386-tdep.c (i386_get_frame_setup): Recognize function
777 prologues in code compiled with -fcheck-stack.
779 Thu Jul 23 14:49:27 1998 Dawn Perchik <dawn@cygnus.com>
781 * remote-mips.c (remote_mips_insert_hw_breakpoint,
782 remote_mips_remove_hw_breakpoint): New functions for hardware
783 breakpoints on LSI targets.
784 * config/mips/tm-embed.h (target_remove_hw_breakpoint,
785 target_insert_hw_breakpoint): Define to call
786 remote_mips_insert_hw_breakpoint and remote_mips_remove_hw_breakpoint,
790 Thu Jul 23 13:00:28 1998 Ian Carmichael <iancarm@cygnus.com>
792 * txvu-tdep.c: (VU0_MEM0_WINDOW_START, VU1_MEM0_WINDOW_START)
793 Changed to use addresses in kseg1 range.
796 1998-07-21 Fernando Nasser <fnasser@totem.to.cygnus.com>
798 * source.c (print_source_lines): Print "No such file or directory"
800 (directory_command): same as above; resets if user issues dir.
802 Sun Jul 19 02:11:45 1998 Martin M. Hunt <hunt@cygnus.com>
804 * symtab.c (decode_line_2): Instead of printing a prompt
805 and calling command_line_input() without a prompt, just
806 call it with the proper args. This makes the GUI work too.
808 Fri Jul 17 9:26:50 1998 Ron Unrau <runrau@cygnus.com>
810 * blockframe.c (find_pc_sect_partial_function): allow for the possi-
811 bility of multiple symbols at the same address when finding high.
812 * breakpoint.c (resolve_sal_pc): if the function based section lookup
813 fails, try getting the section from the minimal symbol table.
814 * parse.c (write_exp_msymbol): use symbol_overlayed_address to get
815 the LMA of a minimal symbol if unmapped.
816 * symtab.c (find_line_symtab): change interface to return symtab
817 containing the best linetable found.
818 (decode_line_1): use find_line_symtab to set val.symtab. This should
819 improve support for source files with multiple symtabs.
821 * tm-txvu.h: include tm-mips64.h instead of starting from scratch.
824 Wed Jul 15 11:51:33 1998 Keith Seitz <keiths@cygnus.com>
826 * main.c (main): Fix violations of GNU coding standard.
828 * breakpoint.c: Export delete_command.
830 * infcmd.c: Export continue_command, stepi_command, and nexti_command.
832 * Makefile.in: Add target for v850ice.o.
834 * configure.tgt: Add cygwin32 dependencies for v850 ice.
836 Wed Jul 15 10:58:29 1998 Nick Clifton <nickc@cygnus.com>
838 * tracepoint.c (set_raw_tracepoint): Cope with symbols that do not
839 have an associated directory.
841 Mon Jul 13 15:21:04 1998 Mark Alexander <marka@cygnus.com>
843 * utils.c (puts_debug): Display non-printable characters in hex
846 Thu Jul 9 16:16:47 1998 Jeffrey A Law (law@cygnus.com)
848 * mn10300-tdep.c (mn10300_generic_register_names): New variable.
849 (set_machine_hook): New function. Copy the appropriate register
850 names into reg_names.
851 (_initialize_mn10300_tdep): Set up to call set_machine_hook.
852 * tm-mn10300 (NUM_REGS): Bump to 32.
853 (REGISTER_NAMES): Updated accordingly.
856 * mn10300-tdep.c (am33_register_names): New variable.
857 (mn10300_analyze_prologue): Handle regs saved by am33 prologues.
858 * tm-mn10300.h (E0_REGNUM): Define.
861 Tue Jul 7 7:40:13 1998 Ron Unrau <runrau@cygnus.com>
863 * symtab.c (find_pc_sect_psymbol): allow case where textlow is 0
865 Thu Jul 2 15:57:58 1998 Frank Ch. Eigler <fche@cygnus.com>
867 * breakpoint.c (resolve_sal_pc): Accept absence of innermost
868 Lexical block for breakpoint resolution.
870 Thu Jul 2 10:22:00 1998 Dawn Perchik <dawn@cygnus.com>
872 * mdebugread.c (parse_partial_symbols): Go ahead and read the .mdebug
873 section, but just don't add a 2nd minimal symbol if this is an .mdebug
874 section in an ELF file.
876 1998-07-01 Jim Blandy <jimb@zwingli.cygnus.com>
878 * Makefile.in (ax-general.o): Depend on $(defs_h) too.
879 (ax_h): Bother to define this.
881 Mon Jun 29 19:01:18 1998 Jim Wilson <wilson@cygnus.com>
883 * gnu-regex.c (re_comp): Add cast to char * before gettext calls.
885 Sun Jun 28 11:35:48 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
887 Improve support for SunPro F77.
888 * dbxread.c (end_psymtab, process_one_symbol): Handle minimal
889 symbols with trailing underscore names.
890 * minsyms.c (find_stab_function_addr): Ditto.
891 * dbxread.c (process_one_symbol): Ignore N_ALIAS for now.
892 * partial-stab.h (case N_ALIAS): Ditto.
893 * stabsread.c (read_sun_builtin_type): Handle boolean types.
895 Fri Jun 26 14:03:01 1998 Keith Seitz <keiths@cygnus.com>
897 * symtab.h (enum namespace): Add new namespaces FUNCTIONS_NAMESPACE,
898 TYPES_NAMESPACE, METHODS_NAMESPACE, and VARIABLES_NAMESPACE used by
900 Add prototype for search_symbols and free_search_symbols.
902 * symtab.c (list_symbols): Rewrite to use new search_symbols.
903 (file_matches): New helper function for search_symbols.
904 (free_search_symbols): New function which frees data returned from
906 (print_symbol_info): New helper function which prints info about a
907 matched symbol to stdout. Extracted from old list_symbols.
908 (print_msymbol_info): New helper function which prints info about
909 a matched msymbol to stdout. Extracted from old list_symbols.
910 (symtab_symbol_info): Extracted from old list_symbols.
911 (variables_info): Use symtab_symbol_info.
912 (functions_info): Use symtab_symbol_info.
913 (types_info): Use symtab_symbol_info.
914 (rbreak_command): Rewrite to use new search_symbols.
916 Thu Jun 25 22:38:32 1998 Frank Ch. Eigler <fche@cygnus.com>
918 * mips-tdep.c (mips_push_arguments): Use 128-bit stack frame
919 alignment for inferior calls.
921 Wed Jun 24 23:17:12 1998 Mark Alexander <marka@cygnus.com>
923 * mn10200-tdep.c (mn10200_analyze_prologue): Fix calculation
924 of jsr target address.
926 Tue Jun 23 19:37:46 1998 Mark Alexander <marka@cygnus.com>
928 * config/mn10200/tm-mn10200.h (SAVED_PC_AFTER_CALL): Don't
929 zero upper byte of address.
931 Tue Jun 23 17:32:26 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
933 * rs6000-tdep.c (pop_dummy_frame): use memcpy.
934 (push_arguments): use memset.
935 (various other places): fix up indentation and long lines.
937 Tue Jun 23 11:58:35 1998 Jason Molenda (crash@bugshack.cygnus.com)
939 * configure.in: s/lXext/-lXext/ for Jillian's change.
941 Tue Jun 23 11:14:04 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
943 * source.c (find_source_lines): fix indentation.
945 * config/mips/tm-irix5.h: Modify to work better on irix 6, by
946 making FP registers 8 bytes instead of 4.
947 REGISTER_BYTES: redefine. REGISTER_BYTE(): redefine.
948 REGISTER_VIRTUAL_TYPE: redefine. MIPS_LAST_ARG_REGNUM: redefine.
949 * irix5-nat.c (fetch_core_registers): read 8 bytes per FP register.
950 * mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish
951 targets with 8-byte FP registers (don't use TARGET_MIPS64).
952 (STACK_ARGSIZE): new macro, how much space is taken up on the
953 stack for each function argument (don't use TARGET_MIPS64).
954 (mips_push_arguments): modify logic to work better on Irix 6
957 Tue Jun 23 12:29:53 1998 Jillian Ye <jillian@cygnus.com>
959 * configure.in: Add -lXext to mips_extra_libs
960 * configure: Regenerated.
962 Sun Jun 21 09:31:12 1998 Ron Unrau (runrau@cygnus.com)
964 * symtab.c (find_line_pc): assumed that a PC of 0 is illegal.
965 Changed to pass PC as arg and return 1 if valid (0 otherwise).
966 symtab.h: change prototype to match
967 symtab.c (find_line_pc_range): use new interface
968 breakpoint.c (resolve_sal_pc): ditto
969 gdbtk.c (gdb_set_bp): ditto
971 Wed Jun 17 15:50:00 1998 Ron Unrau (runrau@cygnus.com)
973 * parse.c (target_map_name_to_register): Check target specific
974 aliases *first* so that it can over-ride architectural names
976 Wed Jun 17 17:13:38 1998 Said Ziouani (saidz@park-street.cygnus.com)
978 * remote-sds.c (sds_start_remote): Fix printf call.
980 Tue Jun 16 16:32:08 1998 Mark Alexander <marka@cygnus.com>
982 * mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer
983 crash when in "start".
985 Tue Jun 16 14:38:40 1998 Ron Unrau (runrau@cygnus.com)
987 * dbxread.c: reset function_start_offset after a finishing N_FUN
989 * remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override
990 target vectors as needed.
992 Sun Jun 14 08:46:25 1998 Ron Unrau (runrau@cygnus.com)
994 * partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass
995 CUR_SYMBOL_VALUE as CORE_ADDR instead of long
996 * buildsym.[ch]: export pending_blocks list
998 Sat Jun 13 13:02:32 1998 Dawn Perchik (dawn@cygnus.com)
1000 * remote.c : Fix remote help string to match that of help.exp.
1002 Fri Jun 12 14:22:55 1998 Jason Molenda (crash@bugshack.cygnus.com)
1004 * configure.in (LIBS): Add -lw to the list of libraries if needed.
1006 Thu Jun 11 15:05:10 1998 Jason Molenda (crash@bugshack.cygnus.com)
1009 * configure.in: Don't see if we need to replace btowc().
1010 * Makefile.in: Don't include LIBOBJS.
1011 * configure: Regenerated.
1012 * gnu-regex.c (regex_compile): Only support i18n [:foo:] if
1015 Wed Jun 10 15:39:14 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
1017 * c-exp.y: Fix problems with parsing "'foo.bar'::func". Some languages
1018 allow symbols with dots.
1020 * gdbtypes.c (check_stub_method): Cosmetic. Use more descriptive
1021 names for parameters.
1024 * jv-exp.y: Parser now accepts primitive types.
1025 * (parse_number): Use correct ifdef for scanf long double support.
1026 * jv-lang.c (java_array_type): Initial cut at array support.
1029 * language.c language.h (set_language): Now returns previous language.
1031 * symtab.c (find_methods): Make static. Cosmetic changes, including
1032 indentation, and adding descriptive comments. Move local variable defs
1033 into the block they are used in.
1034 * Don't call check_stub_method any more. Use gdb_mangle_name to
1035 generate the full method name. find_method doesn't need all the other
1036 goobldegook that check_stub_method does.
1037 * (gdb_mangle_name): Use more descriptive names for parameters. Fix
1040 * (lookup_partial_symbol lookup_block_symbol): Check for java to
1041 ensure we can find mangled names.
1043 * (decode_line_1): Move local variable defs into the block they are
1044 used in. (Improves code readability.)
1046 Wed Jun 10 18:04:35 1998 Frank Ch. Eigler <fche@cygnus.com>
1048 * gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for
1050 (create_set_type): Ditto for all-positive set values.
1051 * values.c (unpack_field_as_long): Check for typedef in struct
1054 Wed Jun 10 14:06:05 1998 Jason Molenda (crash@bugshack.cygnus.com)
1056 * configure.in: Add some tests for gnu-regex.c's benefit.
1057 See if btowc() function is provided in C library.
1058 * configure, config.in: Regenerated.
1059 * Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c
1061 * btowc.c: New file.
1063 * gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris'
1065 Drop namespace preserving defines for now.
1067 Wed Jun 10 11:53:42 1998 Jason Molenda (crash@bugshack.cygnus.com)
1069 * gnu-regex.c: Include "gnu-regex.h", not "regex.h".
1071 Wed Jun 10 11:34:07 1998 Jason Molenda (crash@bugshack.cygnus.com)
1073 * gnu-regex.c, gnu-regex.h: Change LGPL license to GPL license
1074 to stay consistent with the rest of GDB.
1076 Wed Jun 10 11:27:39 1998 Jason Molenda (crash@bugshack.cygnus.com)
1078 * gnu-regex.c, gnu-regex.h: Update to current FSF (glibc) versions.
1080 Wed Jun 10 10:58:18 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1082 * printcmd.c (disassemble_command): move overlay mapping code
1083 "up" into find_pc_partial_function.
1084 * blockframe.c (find_pc_partial_function): adjust start address
1085 and end address for overlays (mapped vs. unmapped addresses),
1086 so that all callers of this function may benefit.
1087 * m32r-tdep.c (m32r_skip_prologue): adjust indentation.
1089 Mon Jun 8 16:08:10 1998 Ron Unrau <runrau@cygnus.com>
1091 * objfiles.c (add_to_objfile_sections): All targets to define
1092 TARGET_KEEP_SECTION to permit them to retain bfd sections that
1093 GDB would otherwise have discarded.
1095 Fri Jun 5 13:56:19 1998 Doug Evans <devans@canuck.cygnus.com>
1097 * dbxread.c (read_dbx_symtab): Don't lower texthigh for last psymtab.
1099 Thu Jun 4 18:35:04 1998 Stan Shebs <shebs@andros.cygnus.com>
1101 * remote.c (init_extended_remote_ops): Make extended_remote_ops
1102 by copying from remote_ops, move it and init_remote_ops to
1103 usual place at end of file, remove "void" from arg lists.
1105 Thu Jun 4 17:51:06 1998 Mark Alexander <marka@cygnus.com>
1107 * sparc-tdep.c (sparc_fix_call_dummy): Byte-swap the call dummy
1108 on bi-endian machines.
1109 (sparc_extract_return_value): Handle values smaller than int on
1110 machines with little-endian data.
1111 (sparc_target_architecture_hook): Set bi_endian flag.
1113 Thu Jun 4 12:14:48 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1115 * printcmd.c (disassemble_command): Fix off-by-one error for
1116 disassembling functions in unmapped overlay sections.
1118 Thu Jun 4 10:15:03 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1122 - Jim Blandy <jimb@zwingli.cygnus.com>
1123 (print_packet, remote_packet_command): New functions.
1124 (_initialize_remote): Register the remote-packet command.
1125 - David Taylor <taylor@texas.cygnus.com>
1126 (_initialize_remote): remote-compare is now
1128 - Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1129 (remote_compare_command): added warning, issued in case
1132 Thu Jun 4 08:25:38 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1134 * remote.c (remote_compare_command): New function, new command.
1135 Compare object file binary image with corresponding memory on
1136 remote target. Report differences.
1138 Tue Jun 2 19:05:04 1998 Mark Alexander <marka@cygnus.com>
1140 * sparc-tdep.c (sparc_target_architecture_hook): Set target
1141 byte order only when it's selectable.
1143 Tue Jun 2 02:01:56 1998 Mark Alexander <marka@cygnus.com>
1145 * sparc-tdep.c (sparc_target_architecture_hook): New function to
1146 set endianness based on machine type.
1147 (_initialize_sparc_tdep): Initialize target_architecture_hook.
1148 (sparc_print_register_hook): Print PSR and FPSR in fancy format
1150 * config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to
1151 call sparc_print_register_hook instead of using inline code.
1152 * config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove.
1154 Thu May 28 17:19:14 1998 Keith Seitz <keiths@cygnus.com>
1156 * main.c (main): Check for NULL from getenv on CYGWIN32.
1158 Thu May 28 09:41:44 1998 Nick Clifton <nickc@cygnus.com>
1160 * monitor.c (monitor_vsprintf): Handle %%. Patch courtesy of
1161 Felix Lee (flee@cygnus.com)
1163 Thu May 28 00:27:35 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1165 * mips-tdep.c (mips_push_dummy_frame): Fix calculation of
1166 PROC_REG_OFFSET and PROC_FREG_OFFSET.
1168 Mon Apr 27 14:37:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
1170 * config/v850/tm-v850.h (REGISTER_BYTE): FP_REGNUM and
1171 FP_RAW_REGNUM use the same register location.
1173 * v850-tdep.c (v850_scan_prologue): Use FP_RAW_REGNUM instead of
1175 (v850_frame_chain): Ditto.
1177 * config/v850/tm-v850.h (REGISTER_NAMES): Add "fp".
1179 (FP_REGNUM): Update.
1180 (FP_RAW_REGNUM): Define.
1182 Wed May 27 14:22:31 1998 Keith Seitz <keiths@cygnus.com>
1184 * main.c (main): Convert the path returned from getenv to a posix
1185 path on cygwin32 hosts.
1187 Mon May 25 13:31:27 1998 Keith Seitz <keiths@cygnus.com>
1189 * remote.c (remote_open_1): If an error occurs starting the remote,
1190 pop the target AND return.
1192 Sat May 23 02:23:09 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1194 * dwarf2read.c (read_subroutine_type): Set TYPE_FLAG_PROTOTYPED
1196 * valops.c (value_arg_coerce): Add new argument to indicate whether
1197 the function has a prototype, handle integer and float promotions
1199 (call_function_by_hand): Always call value_arg_coerce, pass down
1200 prototype information.
1202 Fri May 22 10:56:36 1998 John Metzler <jmetzler@cygnus.com>
1204 * remote.c (_initialize_remote): Typo extended__remote
1206 Thu May 21 13:14:25 1998 John Metzler <jmetzler@cygnus.com>
1208 * gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment.
1209 (_initialize_gnu_nat): Call new init
1210 * mac-nat.c (init_child_ops): Ditto.
1211 (_initialize_mac_nat): Ditto.
1212 * monitor.c (init_base_monitor_ops): Ditto.
1213 (_initialize_remote_monitors): Ditto.
1214 * ppc-bdm.c (init_bdm_ppc_ops): Ditto.
1215 (_initialize_bdm_ppc): Ditto.
1216 * remote-adapt.c (init_adapt_ops): Ditto.
1217 (_initialize_remote_adapt): Ditto.
1218 * remote-array.c (init_array_ops): Ditto.
1219 (_initialize_array): Ditto.
1220 * remote-bug (init_bug_ops): Ditto.
1221 (_initialize_remote_bug): Ditto.
1222 * remote-e7000.c (init_e7000_ops): Ditto.
1223 (_initialize_remote_e7000): Ditto.
1224 * remote-eb.c (init_eb_ops): Ditto.
1225 (_initialize_remote_eb): Ditto.
1226 * remote-es.c (init_es1800_ops): Ditto.
1227 (init_es1800_child_ops): Ditto.
1228 (_initialize_es1800): Ditto.
1229 * remote-hms.c (init_hms_ops): Ditto.
1230 (_initialize_remote_hms): Ditto.
1231 * remote-mm.c (init_mm_ops): Ditto.
1232 (_initialize_remote_mm): Ditto.
1233 * remote-nindy.c (init_nindy_ops): Ditto.
1234 (_initialize_nindy): Ditto.
1235 * remote_nrom.c (init_nrom_ops): Ditto.
1236 (_initialize_remote_nrom): Ditto.
1237 * remote-os9k (init_rombug_ops): Ditto.
1238 (_initialize_remote_os9k): Ditto.
1239 * remote-rdi.c (init_rdi_ops): Ditto.
1240 (_initialize_remote_rdi): Ditto.
1241 * remote-rdp.c (init_remote_rdp_ops): Ditto.
1242 (_initialize_remote_rdp): Ditto.
1243 * remote-sds.c (init_sds_ops): Ditto.
1244 (_initialize_remote_sds): Ditto.
1245 * remote-sim.c (init_gdbsim_ops): Ditto.
1246 (_initialize_remote_sim): Ditto.
1247 * remote-st.c (init_st2000_ops): Ditto.
1248 (_initialize_remote_st2000): Ditto.
1249 * remote-udi.c (init_udi_ops): Ditto.
1250 (_initialize_remote_udi): Ditto.
1251 * remote-vx.c (init_vx_ops): Ditto.
1252 (init_vx_run_ops): Ditto.
1253 (_initialize_vx): Ditto.
1254 * remote.c (init_remote_ops): Ditto.
1255 (init_extended_remote_ops): Ditto.
1256 (_initialize_remote): Ditto.
1257 * sparcl-tdep.c (init_sparclite_ops): Ditto.
1258 (_initialize_sparcl_tdep): Ditto.
1259 * v850ice.c (init_850ice_ops): Ditto.
1260 (_initialize_v850ice): Ditto.
1261 * win32-nat.c: (init_child_ops): Ditto.
1262 (_initialize_inftarg): Ditto.
1264 1998-05-21 Jim Blandy <jimb@zwingli.cygnus.com>
1266 * ax-gdb.c (const_var_ref): Don't handle function names. I don't
1267 want to implement all the "usual unary conversion" rules for
1269 (gen_usual_unary): Turn "function" values into "pointer to
1270 function" values, in accordance with ANSI.
1271 (gen_deref): Don't do the usual unary conversions here. Let the
1272 caller do it. Note that dereferencing a function pointer yields
1273 a function designator, which we call an rvalue, not an lvalue.
1274 (gen_address_of): Handle functions specially.
1275 (gen_struct_ref): Perform the usual unary conversions before
1277 (gen_expr): In case for the prefix '*' operator, call
1278 gen_usual_unary manually.
1280 Wed May 20 15:29:41 1998 Gavin Koch <gavin@cygnus.com>
1282 * mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE.
1283 * mips/tm-tx39l.h: Same.
1285 Wed May 20 10:12:11 1998 John Metzler <jmetzler@cygnus.com>
1287 * m32r-tdep.c: (decode_prologue): Handle frames compiled with -Os.
1288 Split out as separate function called by skip prologue and scan
1289 prologue. new formula handles optimization in which the prologue
1290 is interleaved with the body of the function. Also recognizes new
1291 variations of prologue encoding. Use of frame pointer is
1292 essential to debugging, -fno-omit-frame-pointer
1293 (m32r_skip_prologue): Call decode prologue, ignore line info
1294 (m32r_scan_prologue): Call decode prologue, ignore line info.
1296 Tue May 19 17:23:54 1998 John Metzler <jmetzler@cygnus.com>
1298 * w89k-rom.c (_initialize_w89k): Call new init function
1299 (init_w89k_cmds): Convert to dynamic initialization of monitor_ops
1300 data structure for forward compatability with additions to the
1302 * dbug-rom.c (_initialize_dbug_rom): ditto
1303 (init_dbug_cmds): ditto
1304 * m32r-rom.c (_initialize_m32r_rom): ditto
1305 (init_m32r_cmds): ditto
1307 Tue May 19 14:54:11 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1309 * tracepoint.c (memrange_cmp): use const void * args to avoid
1310 ANSI compiler warnings.
1312 1998-05-19 Jim Blandy <jimb@zwingli.cygnus.com>
1314 * ax-gdb.c (gen_fetch, gen_var_ref, gen_deref, find_field,
1315 gen_bitfield_ref, gen_expr): Call error, not abort.
1316 * ax-general.c (read_const, generic_ext, ax_trace_quick,
1317 ax_label, ax_const_d, ax_reg, ax_print): Same.
1319 * tracepoint.c: Remove the $(...) syntax for memranges.
1320 (validate_actionline, encode_actions, trace_dump_command): Remove
1321 clauses for the $(...) syntax.
1322 (parse_and_eval_memrange): Function deleted.
1323 (_initialize_tracepoint): Update function description.
1325 * gdbtk.c (struct wrapped_call_objs): Change the `func' member to
1326 be a Tcl_ObjCmdProc, not an Tcl_CmdProc, since it accepts a vector
1327 of objects as arguments. Change the object vector to be const,
1328 since that's what all the users of this structure seem to expect.
1329 (call_obj_wrapper): Cast clientData properly before storing it in
1330 the wrapped_args structure.
1332 * ax-gdb.c (_initialize_ax_gdb): Make the "agent" command a
1333 subcommand of "maintenance", as it should have been from the
1334 beginning. #include "gdbcmd.h", to get the declaration for
1336 * Makefile.in: Document that dependency.
1338 Tue May 19 12:00:58 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1340 * tracepoint.c (get_tracepoint_by_number): new function, to access
1341 traceframe_number for use of the GUI.
1343 * tracepoint.h: added prototype for get_traceframe_number.
1345 Mon May 18 13:34:27 1998 Keith Seitz <keiths@cygnus.com>
1347 * dbxread.c (process_one_symbol): If block addresses are relative to
1348 function start addresses, reset function_start_address whenever a new
1349 source file is seen.
1351 Mon May 18 13:04:27 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1353 * tracepoint.c (get_tracepoint_by_number): make sure to advance
1354 arg pointer even if we fail to parse a useful number. Otherwise,
1355 since this function is called in a loop, it may loop forever!
1356 Also change strtol call to allow arbitrary radix.
1357 (map_args_over_tracepoints (and other places)): add QUIT; call
1358 to loop, to allow breakout using control-C. Not all loops were
1359 analyzed to make sure they could terminate cleanly, but even
1360 terminating with a messed-up tracepoint list would be better
1361 than not terminating at all!
1362 (tdump_command): check to see if we're connected to a trace-
1363 capable target (currently only "remote") before doing anything
1366 Sat May 16 22:21:48 1998 Frank Ch. Eigler <fche@cygnus.com>
1368 * config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
1369 frame struct before extracting saved register offsets.
1371 Fri May 15 22:47:45 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1373 * tracepoint.c (encode_actions): fix typo in printf format string.
1375 1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com>
1377 Implement a few more tracing operators: ^ | & ~ !
1378 * ax-gdb.c (gen_integral_promotions, gen_logical_not,
1379 gen_complement): New functions.
1380 (gen_binop): New argument MAY_CARRY, indicating whether we need to
1381 correct the upper bits of the value after performing the
1382 operation. Callers changed.
1383 (gen_expr): Handle BINOP_BITWISE_AND, BINOP_BITWISE_IOR, and
1384 BINOP_BITWISE_XOR here as well, by calling gen_binop. Handle
1385 UNOP_LOGICAL_NOT, UNOP_COMPLEMENT.
1387 * ax-gdb.c (gen_conversion): Reworked to avoid some unnecessary
1390 * ax-gdb.c (gen_usual_arithmetic): Renamed from gen_usual_binary,
1391 to match the ANSI C standard better. Callers changed.
1393 * ax-gdb.c (gen_traced_pop): Add prototyped declaration.
1395 Fri May 15 18:18:38 1998 David Taylor <taylor@texas.cygnus.com>
1397 * tracepoint.c (stringify_collections_list): return a collection
1398 of strings rather than a single string.
1399 (free_actions_list): new function.
1400 (encode_actions): process collection of strings returned by
1401 stringify_collections_list.
1403 1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com>
1405 * ax-gdb.c (gen_traced_pop): New function.
1406 (gen_expr): Call it for comma operator.
1407 (gen_trace_for_expr): Call it, instead of writing it out.
1409 Add facilities for sending arbitrary packets to the remote agent.
1410 There are a bunch of improvements to make (make it generic; handle
1411 'O' replies properly), but I just want to get this onto the branch.
1412 * remote.c (print_packet, remote_packet_command): New functions.
1413 (_initialize_remote): Register the remote-packet command.
1415 Thu May 14 17:52:31 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1417 * tracepoint.c: move actionline_type definition to tracepoint.h.
1418 (validate_actionline): make non static.
1420 * tracepoint.h: move actioline_type definition from tracepoint.c.
1421 (validate_actionline) moved prototype from tracepoint.c.
1423 Thu May 14 11:49:18 1998 David Taylor <taylor@texas.cygnus.com>
1425 * tracepoint.c (validate_actionline): add additional error
1426 checking, remove some dead code.
1427 (encode_actions): additional cleanups.
1428 (trace_find_command): remove some dead code.
1429 (trace_find_pc_command): ditto.
1430 (trace_find_tracepoint_command): ditto.
1431 (trace_find_line_command): ditto.
1432 (trace_find_range_command): ditto.
1433 (trace_find_outside_command): ditto.
1435 Thu May 14 5:51:00 1998 Ron Unrau <runrau@cygnus.com>
1437 * symtab.c (decode_line_1): set section for "break *<addr>"
1439 Wed May 13 20:58:02 1998 Mark Alexander <marka@cygnus.com>
1441 * corefile.c (reopen_exec_file): Reopen the exec file if
1444 Wed May 13 15:22:02 1998 Mark Alexander <marka@cygnus.com>
1446 * sparc-tdep.c (fetch_instruction): New function.
1447 (single_step, sparc_init_extra_frame_info, examine_prologue):
1448 Use fetch_instruction instead of read_memory_integer
1449 to ensure that instructions are always read as big-endian.
1451 Wed May 13 14:42:21 1998 Ian Lance Taylor <ian@cygnus.com>
1453 * configure.in: Add AC_FUNC_ALLOCA.
1454 * defs.h: Check HAVE_ALLOCA_H rather than sparc. Add _AIX pragma
1456 * configure: Rebuild.
1458 * Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New
1462 Wed May 13 11:19:08 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1464 * tracepoint.c (trace_command): Remove old diagnostic code that was
1465 preventing tracepoints from being defined with a full-path filename.
1467 Tue May 12 13:17:35 1998 Frank Ch. Eigler <fche@cygnus.com>
1469 * stabsread.c (read_one_struct_field): Check for typedef in type
1470 tree before clearing bitfield information.
1472 1998-05-11 Jim Blandy <jimb@zwingli.cygnus.com>
1474 * ax-gdb.c (gen_binop): New function, based on gen_mul, to replace
1475 gen_mul and gen_div, and handle `%' op as well. Correctly tests
1477 (gen_expr): Factor out common code in binary arithmetic operators.
1478 Add support for `%'.
1479 (gen_mul, gen_div): Removed.
1481 Thu May 7 14:49:38 1998 Bob Manson <manson@charmed.cygnus.com>
1483 * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve
1484 %o0-%o5 as 64-bit values; compensate for stack bias.
1485 (USE_STRUCT_CONVENTION): We only pass pointers to structs
1486 if they're larger than 32 bytes.
1487 (REG_STRUCT_HAS_ADDR): Ditto.
1489 * sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
1490 instead of read_register. If the target is a sparc64 and the frame
1491 pointer is odd, compensate for the stack bias.
1492 (get_saved_register): Use read_sp().
1493 (DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
1494 (sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
1495 save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
1496 (sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
1497 CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
1499 (sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
1500 the FP is odd, compensate for stack bias.
1501 (sparc_store_return_value): Right-justify the return value before
1503 (sparc_fix_call_dummy): Don't NOP out part of the call dummy on
1505 (sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
1506 sparc64_write_fp, sp64_push_arguments,
1507 sparc64_extract_return_value): New functions to support the
1510 * dwarfread.c (handle_producer): Set processing_gcc_compilation to
1511 the right version number.
1513 * dwarf2read.c (read_file_scope): Assume we're processing
1516 Wed May 6 16:34:03 1998 Jeffrey A Law (law@cygnus.com)
1518 * somsolib.c: Include gdb_stat.h.
1520 Mon May 4 18:34:01 1998 David Taylor <taylor@texas.cygnus.com>
1522 * ax-gdb.c (gen_mul): new function; (gen_div): new function;
1523 (gen_expr): add support for * and / operators, call gen_mul and
1524 gen_div as appropriate.
1526 Mon May 4 16:24:22 1998 Mark Alexander <marka@cygnus.com>
1528 * defs.h (make_run_cleanup): Declare.
1529 * solib.c (find_solib): Pass correct number of arguments to
1532 Mon May 4 07:08:25 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1534 * tracepoint.c (trace_actions_command): actions command must set
1535 step_count to zero (in case previous actions have set it but the
1538 Sat May 2 09:35:07 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
1540 * ocd.h: Add new flags, function codes, and processor types to support
1541 new Wiggler capabilities.
1542 * (ocd_write_bytes_size): New function to allow atomic writes of
1543 memory in sizes larger than a byte.
1545 * ser-unix.c (baudtab): Add 57600, 115200, 230400, and 460800 baud.
1547 Fri May 1 19:51:32 1998 Frank Ch. Eigler <fche@cygnus.com>
1549 * stabsread.c (read_one_struct_field): Do not override supplied
1550 bitfield size for a range type value.
1552 * gdbtypes.c (create_range_type): For a range with positive
1553 lower limit, declare range type as unsigned.
1555 Fri May 1 10:58:34 1998 John Metzler <jmetzler@cygnus.com>
1557 * monitor.c: Turn off debug
1559 Fri May 1 09:29:56 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1561 * breakpoint.c (delete_command): Skip internal breakpoints when
1562 all breakpoints are requested.
1564 * stabsread.c (define_symbol): Record parameter types from Sunpro
1565 function stabs in the TYPE_FIELDS of the function type.
1567 Thu Apr 30 15:59:54 1998 Jason Molenda (crash@bugshack.cygnus.com)
1569 * Makefile.in (config-check-targets, config-check-hosts): Removed.
1571 1998-04-30 Paul Eggert <eggert@twinsun.com>
1573 * Makefile.in (maintainer-clean):
1574 Don't get ahead of yourself and delete Makefile
1575 before running `make'.
1576 (local-maintainer-clean, do-maintainer-clean): New rules.
1578 Wed Apr 29 14:02:59 1998 David Taylor <taylor@texas.cygnus.com>
1580 * ax-gdb.c (gen_add): when adding a pointer and an int, use
1581 the size of the pointer, not the int (typo) to decide how
1582 to extend the result.
1584 Wed Apr 29 10:20:40 1998 John Metzler <jmetzler@cygnus.com>
1585 start-sanitize-vr4111
1587 * nec4102rom.c: New file implements ROM monitor adapter for
1588 nec-vr4102 board. This board hosts the vr4111 chip. This file
1589 required extensions to the monitor_ops structure, hooks for wait
1590 filter, new flags. This version does not support more than one
1591 breakpoint and resuming after a breakpoint in 16 bit mode is
1592 completely disfunctional.
1595 * monitor.h: Defined additional hooks for dmpregs, configure_hooks
1596 and wait_filter. These additions require that all ROM monitor
1597 interfaces be recoded to initialize monitor ops using assignments
1598 rather than static structure initialization. Added new bits to
1599 flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES.
1601 * monitor.c (RDEBUG): Conditional tracing throughout the file.
1602 (fromhex): Now recognized upper cse hex digits
1603 (monitor_printf_noecho):
1604 (monitor_readchar): Tracing interferes with input timing.
1605 (monitor_open): Register different memory write functions with
1606 dcache_init if MO_HAS_BLOCKWRITES.
1607 (flush_monior_dcache): Added as an additional utilty.
1608 (monitor-resume): Call continue hook if one has been supplied.
1609 (monitor_wait_filter): New function Factored out of monitor wait
1610 and used if alternate wait-filter has not been provided.
1611 (monitor_wait): call alternate wait filter if provided. Call
1612 monitor_dump_regs, a new function factored out from inline code.
1613 (monitor_dump_block): A new function used as a utility when
1614 monitors must dump several blocks of registers using different
1616 (monitor_dump_regs): Call alternate function if provided. Uses new
1618 (monitor_write_memory): Engage previouly added hook
1620 (monitor_write_even_block): new function supports writing long
1621 blocks of 4byte words.
1622 (longlongendswap): new internal function
1623 (monitor_write_memory_longlongs): new function writes large blocks
1624 using command to enter a long long.
1625 (monitor_write-memory_block): new Function figures out which block
1627 (monitor_read_memory): Can now handle dump formats in which the bytes
1628 preceeding the requested data is not printed.
1630 Tue Apr 28 19:41:33 1998 Tom Tromey <tromey@cygnus.com>
1632 * Makefile.in (GDBTKLIBS): New macro.
1633 (INSTALLED_LIBS): Include GDBTKLIBS.
1635 * configure: Rebuilt.
1636 * configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS.
1637 (GDBTKLIBS): AC_SUBST.
1639 * tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' ->
1642 * tracepoint.c (memrange_cmp): Fixed typo in function intro.
1644 Tue Apr 28 17:41:20 1998 Philippe De Muyter <phdm@macqel.be>
1646 * symfile.c (overlay_auto_command): Add forgotten parameter
1648 (overlay_manual_command, overlay_off_command): Likewise.
1649 (overlay_load_command): Likewise.
1650 * tracepoint.c (memrange_cmp): Parameters have type void *, not
1653 Tue Apr 28 11:08:25 1998 John Metzler <jmetzler@cygnus.com>
1655 * rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds.
1657 Mon Apr 27 14:32:21 1998 Mark Alexander <marka@cygnus.com>
1659 * config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically,
1660 make it work on the simulator.
1661 (FIX_CALL_DUMMY): Convert to function call instead of inline code.
1662 (sparc_fix_call_dummy): Declare.
1663 * sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
1664 old FIX_CALL_DUMMY macro, with additional fixes for simulator.
1665 (sparc_push_dummy_frame): Set registers differently on simulator
1666 to prevent corrupted register window save areas.
1668 Mon Apr 27 13:46:40 1998 John Metzler <jmetzler@cygnus.com>
1670 * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds):
1671 Convert all static initializations of monitor ops structures to
1672 executable initializations in order that additions to the data
1673 structure definition can me made without repeating this editing
1675 * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto.
1676 * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto.
1677 * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto.
1678 * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto.
1679 * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto.
1680 * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto.
1681 * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto.
1682 * remote-est.c (_initialize_est, init_est_cmds): Ditto.
1683 * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto.
1685 Mon Apr 27 10:43:04 1998 Jason Molenda (crash@bugshack.cygnus.com)
1687 * gdb_string.h (strdup): Don't specify arguments in prototype.
1689 Sun Apr 26 07:57:21 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1691 * rs6000-nat.c (vmap_ldinfo): Issue warning instead of error if
1692 fstat on ldinfo_fd fails. Use objfile->obfd instead of vp->bfd
1693 to check for reference to the same file.
1695 * target.c (target_read_string): Handle string transfers at the
1696 end of a memory section gracefully.
1698 Fri Apr 24 17:18:56 1998 Geoffrey Noer <noer@cygnus.com>
1700 * Makefile.in: enable EXEEXT setting
1702 Fri Apr 24 11:53:49 1998 David Taylor <taylor@texas.cygnus.com>
1704 * tracepoint.c (add_local_symbols): change type of type from
1705 char to int so that type shows up as 'A' or 'L' not 0.
1707 start-sanitize-r5900
1708 Fri Apr 24 11:25:07 1998 Jeffrey A Law (law@cygnus.com)
1710 * mips-tdep.c (mips32_decode_reg_save): Handle 128bit wide
1711 GPR loads/stores generated on the r5900.
1712 (mips_find_saved_regs, mips32_skip_prologue): Likewise.
1713 * mips/tm-r5900.h (R5900_128BIT_GPR_HACK): Define.
1714 * mips/tm-txvu.h (R5900_128BIT_GPR_HACK): Likewise.
1717 Thu Apr 23 16:37:20 1998 Jason Molenda (crash@bugshack.cygnus.com)
1719 * README: Minor changes for 4.17 release.
1722 Thu Apr 23 15:44:39 1998 Per Bothner <bothner@cygnus.com>
1724 * symfile.c (deduce_language_from_filename): .class implies java.
1727 Thu Apr 23 12:52:21 1998 Philippe De Muyter <phdm@macqel.be>
1729 * configure.in (strerror): Check if function must be declared.
1730 * acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
1731 * gdb_string.h (strerror): Function declaration issued if
1732 NEED_DECLARATION_STRERROR.
1733 * configure, config.in : Files regenerated.
1735 Thu Apr 23 12:27:43 1998 Philippe De Muyter <phdm@macqel.be>
1737 * symfile.c (simple_overlay_update_1): Do not prefix array address
1739 * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto.
1740 * tracepoint.c (encode_actions): Ditto.
1741 * language.c, complaints.c, utils.c (varargs.h): Do not include that
1742 file here, it is already included indirectly by defs.h.
1743 * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return
1744 value to the appropriate pointer type.
1745 * utils.c (floatformat_from_doublest): Ditto.
1746 * tracepoint.c (read_actions, _initialize_tracepoint): Ditto.
1747 (add_memrange): Likewise with xrealloc return value.
1748 * stabsread.c (ref_add): Ditto.
1749 * coffread.c (coff_symfile_init): Likewise for xmmalloc return value.
1750 * elfread.c (elf_symfile_read): Ditto.
1751 * os9kread.c (os9k_symfile_init): Ditto.
1753 Thu Apr 23 00:32:08 1998 Tom Tromey <tromey@cygnus.com>
1755 * config.in: Rebuilt.
1756 * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT,
1757 HAVE_LC_MESSAGES): Define.
1759 Wed Apr 22 15:38:56 1998 Tom Tromey <tromey@cygnus.com>
1761 * configure: Rebuilt.
1762 * configure.in: Call CY_GNU_GETTEXT.
1763 * Makefile.in (top_builddir): New macro.
1764 (INTL): Define to @INTLLIBS@.
1765 (INTL_DEPS): New macro.
1766 (CDEPS): Reference INTL_DEPS, not INTL.
1769 Wed Apr 22 13:40:16 1998 Doug Evans <devans@canuck.cygnus.com>
1771 * txvu-tdep.c (txvu_print_insn): Fix thinko.
1774 Wed Apr 22 12:58:23 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1776 Handle missing shared libraries during the examination of a core
1778 * solib.c (find_solib): Use catch_errors around call to
1779 solib_map_sections. Use warning instead of error if reading of
1780 the shared library name fails.
1781 (solib_map_sections): Change return and argument types to make
1782 it callable from catch_errors.
1783 (symbol_add_stub): Avoid GDB core dump if solib->abfd is NULL.
1784 * irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections,
1785 symbol_add_stub): Ditto.
1787 Wed Apr 22 14:34:49 1998 Michael Meissner <meissner@cygnus.com>
1789 * Makefile.in (INTL*): Add support to link in the intl library,
1790 and to add -I options to its source and object directories.
1791 (INTERNAL_CFLAGS): Ditto.
1792 (C{LIBS,DEPS}): Ditto.
1795 Wed Tue 21 17:29:48 1998 Jim Lemke <jlemke@cygnus.com>
1796 * configure.in: Add configure option --with-sim-funit.
1799 Tue Apr 21 11:20:54 1998 Frank Ch. Eigler <fche@cygnus.com>
1801 * mips-tdep.c (gdb_print_insn_mips): Disassemble MIPS instructions
1802 with subtarget-specific `mach', rather than fixed default.
1803 * config/mips/tm-mips.h (TM_PRINT_INSN_MACH): New macro, default
1805 start-sanitize-r5900
1806 * config/mips/tm-r5900.h (TM_PRINT_INSN_MACH): Override.
1809 * config/mips/tm-txvu.h (TM_PRINT_INSN_MACH): Override.
1812 Mon Apr 20 15:35:03 1998 Philippe De Muyter <phdm@macqel.be>
1814 * coffread.c (decode_base_type): Treat a long field with size greater
1815 than TARGET_LONG_BIT as long long.
1816 * values.c (value_from_longest): Print code value in error message.
1818 Mon Apr 20 15:32:21 1998 Mark Kettenis <kettenis@phys.uva.nl>
1820 * gdb/gdb_string.h (strdup): Declare only if not defined as a
1823 Mon Apr 20 14:18:45 1998 J. Kean Johnston <jkj@sco.com>
1825 * procfs.c: Added replacement macros for LWP stuff. Fixed support
1826 for UnixWare / SVR4.2MP targets and any targets which use
1827 multi-file /proc entries. Fixed support for hardware watchpoints.
1828 * solib.c: SCO needs some of the same code as SunOS. Change
1829 preprocessor conditionals.
1831 * config/i386/i386sco5.mt: New file.
1832 * config/i386/tm-i386sco5.h: New file.
1833 * config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
1834 * config/i386/nm-i386v42mp.h
1835 (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
1836 Add other macros for hardware assisted watchpoints.
1837 * config/i386/nm-i386sco5.h: Correct attributions.
1838 (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
1839 * config/i386/nm-linux.h (target_remote_watchpoint): Pass
1840 'type' through to i386_insert_watchpoint.
1842 Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1844 * infrun.c (wait_for_inferior): Don't add signalled processes
1846 * procfs.c (wait_fd): Note if LWP has exited.
1847 (procfs_wait): use GETPID to get process ID.
1849 Sat Apr 18 15:21:04 1998 Stan Cox <scox@cygnus.com>
1851 * configure.tgt: Added sparc86x support.
1853 Thu Apr 16 13:13:24 1998 Jason Molenda (crash@bugshack.cygnus.com)
1855 * rdi-share/etherdrv.c (EthernetWrite): Use strerror to get
1856 error string if in an ANSI C-ish environment.
1858 Wed Apr 15 18:59:48 1998 Mark Alexander <marka@cygnus.com>
1860 * sparc-tdep.c (SPARC_HAS_FPU): Define.
1861 (sparc_extract_return_value): New function, required to handle
1862 machines without floating point.
1863 (sparc_store_return_value): Ditto.
1864 * config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call
1865 sparc_extract_return_value instead of using inline code.
1866 (sparc_extract_return_value): Declare.
1867 (STORE_RETURN_VALUE): Call sparc_store_return_value instead
1868 of using inline code.
1869 (sparc_store_return_value): Declare.
1871 Wed Apr 15 12:19:42 1998 Martin M. Hunt <hunt@cygnus.com>
1873 * solib.c (enable_break): Only call warning once
1874 instead of three times.
1876 Tue Apr 14 16:52:59 1998 Mark Alexander <marka@cygnus.com>
1878 * sparc-tdep.c (sparc_extract_struct_value_address): Make it
1879 work correctly on little-endian hosts.
1880 (sparc_push_arguments): New function.
1881 (gdb_print_insn_sparc): New function.
1882 (_initialize_sparc_tdep): Make gdb_print_insn_sparc the default
1883 disassembler, so that SPARClite-specific instructions will
1885 * sparcl-tdep.c (readchar): Print debugging information.
1886 (debug_serial_write): New function, a replacement for SERIAL_WRITE
1887 that prints debugging information.
1888 * config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define.
1889 (sparc_push_arguments): Declare.
1891 Tue Apr 14 15:43:49 1998 John Metzler <jmetzler@cygnus.com>
1893 * gdbcfgxref (xref_menu): Call new regex and wild card searches
1894 Now you can type in a specific triple like mips64-vr4300-elf or
1895 somthing like mips*.h
1896 (triple_search) wildcardsearch): The new functions
1898 start-sanitize-vr4320
1899 * configure.tgt: Switch over to use tm-4320.h. Since I switched to
1900 MIPS EABI the fixes are no longer backward compatible with 4300.
1901 * tm-vr4320.h: Added
1905 Mon Apr 13 16:28:07 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1907 * utils.c: (warning) added call to warning_hook
1909 * source.c: (find_source_lines) modified to call warning in case
1910 of source vs. executable time stamp mismatch. Simplified object
1911 file check. Initialized mtime to 0.
1913 * defs.h: added warning_hook prototype
1915 * top.c: added warning_hook prototype.
1917 Mon Apr 13 09:54:08 1998 Keith Seitz <keiths@andros.cygnus.com>
1919 * config/sparc/tm-sun4os4.h (IS_STATIC_TRANSFORM_NAME): Add missing
1922 Fri Apr 10 22:36:28 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1924 Update support for x86 Solaris 2.
1925 * config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration
1926 files for x86 Solaris 2.
1927 * config/i386/i386sol2.mt, i386sol2.mh: Use them.
1928 * config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract
1929 carry flag from a given regset.
1930 (IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name
1931 is a SunPro transformed name.
1932 * i386-tdep.c (sunpro_static_transform_name): New function to
1933 extract the source name from a SunPro transformed name.
1934 * inferior.h (procfs_first_available, procfs_get_pid_fd):
1936 * infrun.c (wait_for_inferior): Handle breakpoint hit in
1937 signal handler without intervening stop in sigtramp.
1938 * procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY
1939 instead of direct access to the status register.
1940 (procfs_get_pid_fd): New function, returns procfs fd for a given pid.
1941 * sol-thread.c (ps_lgetLDT): New function, returns LDT for a given
1943 (sol_find_new_threads): Handle failed libthread_db initialization
1945 * stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME
1946 to check for a SunPro transformed symbol name.
1948 Fri Apr 10 10:35:35 1998 John Metzler <jmetzler@cygnus.com>
1950 * utils.c (fmthex): A formatting function for hexdumps
1952 * mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of
1953 bit pattern interpretations. mips_fetch_instruction does not work
1954 for 16 bit instructions. Some confusion remains about sign
1955 extension in backward branches.
1956 (mips32_relative_offset): Sign extension
1957 (mips32_next_pc): Major debugging, bit pattern interpretation
1958 (print_unpack): debugging printf
1959 (fetch_mips_16): new funtion, key on PC low bit, not symbol table
1960 (mips16_next_16): Initial major debugging of this function. Lots
1961 of bit pattern mistakes.
1962 (mips_next_pc): key on low bit of PC, not symbol table.
1963 * symfile.c(generic_load) : Added a download verification which
1964 reads back the loade code. Download chunk size is now a defined
1965 macro. Fixed a bug in which downloading slips into loading one
1966 byte at a time. Lower level functions in monitor.c can load long
1967 sequences of bytes and make use of these fixups. Referencing
1968 bfd-start_address directly was incorrectly getting zero for start.
1970 Thu Apr 9 19:20:32 1998 Ian Lance Taylor <ian@cygnus.com>
1972 * mips-tdep.c (do_fp_register_row): Use alloca rather than arrays
1975 Wed Apr 8 19:21:42 1998 Jason Molenda (crash@bugshack.cygnus.com)
1977 * top.c (print_gdb_version): Print 1998 now.
1979 Wed Apr 8 16:57:22 1998 Philippe De Muyter <phdm@macqel.be>
1981 * source.c: Remove obsolete decl of strstr().
1983 Wed Apr 8 16:47:33 1998 Jason Molenda (crash@bugshack.cygnus.com)
1985 * solib.c (solib_create_inferior_hook): Remove Ulrich Drepper's
1986 patch of March 23 1998.
1987 * breakpoint.c (breakpoint_re_set_one): Remove Ulrich Drepper's
1988 patch of March 23 1998.
1990 Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com>
1992 * mdebugread.c (parse_partial_symbols): If this is an .mdebug
1993 section in an ELF file, override a symbol's ECOFF section with its
1994 ELF section. Also, fix stabs continuation where a stabs string
1995 continues for more than one continuation.
1997 Mon Apr 6 09:17:48 1998 Andrew Cagney <cagney@b1.cygnus.com>
1999 * mips-tdep.c (mips_push_arguments): Specify dimention of valbuf
2000 using MAX_REGISTER_RAW_SIZE.
2002 Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com>
2004 * infrun.c: Fix prototype of signals_info to match static funtion.
2006 Thu Apr 2 12:47:41 1998 Frank Ch. Eigler <fche@cygnus.com>
2008 * sol-thread.c (sol_thread_store_registers): Save & restore new
2009 value of single updated register to prevent accidental clobbering.
2011 Wed Apr 1 22:01:09 1998 Mark Alexander <marka@cygnus.com>
2013 * config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
2014 * config/sparc/sparclite.mt: Link in the erc32 simulator.
2016 Wed Apr 1 16:30:49 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
2018 * ns32k-tdep.c (flip_bytes, ns32k_localcount,
2019 ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
2022 * ns32knbsd-nat.c: New (?) file to support fetching and storing
2023 registers on NetBSD hosts.
2025 * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
2028 * ns32km3-nat.c (reg_offset): Get order of floating point
2029 registers correct. Add extra 32382 register offsets.
2030 (REG_ADDRESS): define to point at correct part of thread
2031 state. Use calls to "warning" instead of "message".
2033 * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
2034 REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
2037 Wed Apr 1 13:43:07 1998 Philippe De Muyter <phdm@macqel.be>
2039 * NEWS: m68k-motorola-sysv host support added.
2040 * coffread.c (coff_start_symtab): Accept the filename as an argument,
2041 set it here. Callers updated.
2043 Wed Apr 1 23:13:23 1998 Andrew Cagney <cagney@b1.cygnus.com>
2045 * config/mips/tm-mips.h (REGISTER_VIRTUAL_TYPE): Handle 32 bit SR,
2046 FSR and FIR registers.
2047 (REGISTER_VIRTUAL_SIZE): Compute using REGISTER_VIRTUAL_TYPE.
2048 (REGISTER_RAW_SIZE): Define using REGISTER_VIRTUAL_SIZE.
2050 * config/mips/tm-mips64.h: Ditto.
2052 Tue Mar 31 21:30:39 1998 Nick Clifton <nickc@cygnus.com>
2054 * arm-tdep.c (gdb_print_insn_arm): Attach a fake Thumb symbol
2055 vector to the info structure when disassembling thumb
2058 * coffread.c (coff_symtab_read, read_one_sym,
2059 process_coff_symbol): Support Thumb symbol types.
2061 * dbxread.c (process_one_symbol): Call SMASH_TEXT_ADDRESS (if it
2062 is defined) for function symbols.
2064 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
2066 * d10v-tdep.c (d10v_extract_return_value): Wierd. GCC wants to
2067 return odd sized register quantities with only half of the first
2070 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when
2073 Tue Mar 31 16:39:28 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
2075 * tracepoint.c (get_tracepoint_by_number): change warning to note.
2076 (delete_trace_command): suppress y/n query if no tracepoints, or
2077 if not from_tty. (trace_pass_command): reject junk at end of args.
2078 (read_actions): an action list consisting only of "end" is discarded.
2079 (validate_actionline (for collect command)): an argument beginning
2080 with a dollar_sign but not recognized as a special argument is
2081 parsed like any other expression -- if it isn't a register name,
2082 it's rejected. Also reject an empty argument to while-stepping.
2083 (trace_find_command): reject a negative frame number argument.
2084 (_initialize_tracepoint): set $traceframe initially to -1.
2086 Mon Mar 30 16:42:12 1998 Jason Molenda (crash@bugshack.cygnus.com)
2088 * rdi-share/Makefile.am, rdi-share/aclocal.m4,
2089 rdi-share/configure: New files.
2090 * rdi-share/configure.in: Rewritten to be an autoconf input file.
2091 * rdi-share/Makefile.in, rdi-share/configure: Generated by
2093 * rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests
2094 to check environment.
2096 Sun Mar 29 15:17:16 1998 Keith Seitz <keiths@onions.cygnus.com>
2098 * tracepoint.c (trace_start_command): Set trace_running_p.
2099 (trace_stop_command): Clear trace_running_p.
2101 Sat Mar 28 15:19:48 1998 Stan Shebs <shebs@andros.cygnus.com>
2103 * NEWS: Update for 4.17 release.
2105 Fri Mar 27 10:15:50 1998 David Taylor <taylor@tito.cygnus.com>
2107 * tracepoint.c (parse_and_eval_memrange): Fix memory leaks.
2108 (encode_actions): Use the new gen_trace_for_expr function
2109 instead of expr_to_address_and_size; collect registers when
2110 using expressions. (clear_collection_list): Fix memory leak.
2112 1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
2114 * ax-gdb.h (gen_trace_for_expr): Add prototype.
2116 Thu Mar 26 17:24:23 1998 David Taylor <taylor@texas.cygnus.com>
2118 * tracepoint.c (validate_actionline): Fix memory leak.
2119 (encode_actions): Fix memory leak.
2121 Thu Mar 26 16:16:55 1998 David Taylor <taylor@tito.cygnus.com>
2123 * tracepoint.c (trace_mention): New function.
2124 (trace_command): Call it.
2126 1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
2128 * ax-general.c (ax_reqs): New function.
2129 * ax.h (enum agent_flaws, struct agent_reqs): New types.
2130 (agent_reqs): New extern prototype. Well, actually, this was
2131 there before, due to a premature checkin.
2132 (struct aop_map): Add new `data_size' member.
2133 * ax-general.c (aop_map): Supply its value.
2134 * ax-gdb.c (agent_command): Call ax_reqs, for testing.
2136 * ax-general.c (ax_print): If we encounter an invalid or
2137 incomplete opcode, don't abort; just print an error message.
2139 * ax-gdb.c: Generate trace bytecodes, as appropriate.
2140 (trace_kludge): New variable.
2141 (gen_fetch, gen_bitfield_ref): Emit trace bytecodes, if asked
2143 (expr_to_agent): Ask for no trace bytecodes.
2144 (gen_trace_for_expr): New function.
2145 (agent_command): Call it, and display the result appropriately ---
2146 no struct axs_value, so no type or kind information.
2148 * ax-gdb.c: Use TARGET_CHAR_BIT throughout, not HOST_CHAR_BIT.
2150 Thu Mar 26 22:29:28 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2152 * tracepoint.c (trace_status_command): Recognize a boolean return
2153 value from the stub to indicate whether trace experiment is
2154 running. Export this value as a global state variable.
2155 (trace_running_p) for use by the GUI. (from Michael Snyder)
2156 (trace_pass_command) added call to modify_tracepoint_hook.
2158 * tracepoint.h export trace_running_p.
2160 Thu Mar 26 13:08:01 1998 David Taylor <taylor@texas.cygnus.com>
2162 * tracepoint.c (validate_actionline): do not error out if
2163 exp->elts[0].opcode is not on short line -- let
2164 expr_to_address_and_size handle it.
2166 1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
2168 * tracepoint.c: Include "ax.h", not "agentexpr.h".
2170 * tracepoint.c (encode_actions): Call expr_to_address_and_size,
2171 not simply expr_to_agent.
2173 * ax-general.c: Comment out code in progress, so everyone else can
2176 * gdbtypes.c: Doc fix.
2178 * ax.h, ax-gdb.h, ax-general.c, ax-gdb.c: New files.
2179 * Makefile.in (REMOTE_OBJS): Add ax-general.o and ax-gdb.o.
2180 (SFILES): Add ax-general.c, ax-gdb.c.
2181 (ax_h): New variable.
2182 (ax-general.o, ax-gdb.o): New rules.
2185 Wed Mar 25 11:45:19 1998 Frank Ch. Eigler <fche@cygnus.com>
2187 * configure.in (sim-gpu2): Added target type checking to make
2188 --with-sim-gpu2 option only valid for sky target.
2189 * configure: Regenerated.
2192 Tue Mar 24 16:22:40 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
2194 * Makefile.in: Derive SHELL from configure.
2195 * config/d10v/d10v.mt config/m32r/m32r.mt
2196 config/mn10200/mn10200.mt config/mn10300/mn10300.mt
2197 config/d30v/d30v.mt : Remove -lm from SIM. This prevents
2198 dependency checking of -lm (under NT native builds). (It is
2199 automatically added by configure if it exists.)
2200 * doc/configure mswin/configure nlm/configure
2201 testsuite/gdb.base/configure testsuite/gdb.c++/configure
2202 testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
2203 testsuite/gdb.stabs/configure testsuite/gdb.threads/configure:
2204 Regenerate with autoconf 2.12.1 to fix shell issues for NT native
2207 Mon Mar 23 18:10:57 1998 Ulrich Drepper (drepper@cygnus.com)
2209 * solib.c (solib_create_inferior_hook): Rewrite previous
2210 change to check the type of file via BFD.
2212 Mon Mar 23 13:52:28 1998 Ulrich Drepper (drepper@cygnus.com)
2214 * breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events
2215 like bp_breakpoints.
2216 * solib.c (solib_create_inferior_hook): Relocate section addresses
2217 if the alleged start address doesn't agree with the PC.
2220 Mon Mar 23 13:07:22 1998 Frank Ch. Eigler <fche@cygnus.com>
2222 * configure.in (sim-gpu2): Added --with-sim-gpu2 as configure
2223 option, to allow gdb+sim linking with sky GPU2 library.
2224 * configure: Regenerated.
2227 Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2229 merged changes from Foundry (list follows by file/author):
2231 - Tom Tromey <tromey@cygnus.com>
2232 * Makefile.in (gdbres.o): New target.
2233 (WINDRES): New define.
2234 * configure: Rebuilt.
2235 * configure.in (WINDRES): Define.
2236 (CONFIG_OBS): Include gdbres.o on Windows.
2237 * gdbtool.ico: New file.
2241 - Keith Seitz <keiths@onions.cygnus.com>
2242 (wait_for): Don't reset the timeout_remaining for CYGWIN32,
2243 since we now effectively poll the serial port.
2244 Don't reset the current_timeout, either, since this member is used
2245 by hardwire_readchar to track the timeout and call the ui_loop_hook.
2246 (hardwire_readchar): Poll the serial port for Cygwin32. We timeout
2247 every second, update the UI, and loop around doing this until we
2248 have hit the real timeout or we get data or an error. This will
2249 allow the UI to stay active while gdb is "blocked" talking to the
2251 - Martin M. Hunt <hunt@cygnus.com>
2252 (wait_for): Do reset current_timeout because it is only used to
2253 keep track of what the current timeout for the scb is.
2256 - Martin M. Hunt <hunt@cygnus.com>
2257 (quit_confirm): Change exit message again
2259 (pc_changed_hook): Add prototype.
2260 - Tom Tromey <tromey@cygnus.com>
2261 (quit_confirm): Added missing `else'.
2262 (quit_confirm): Special-case message if init_ui_hook is
2266 - Martin M. Hunt <hunt@cygnus.com>
2267 (find_pc_sect_line): If no symbol information
2268 is found, return correct pc anyway.
2269 (find_methods): Comment out an apparently
2270 bogus error message because it messes up Foundry.
2273 - Martin M. Hunt <hunt@cygnus.com>
2274 (_initialize_serial): Add a description of
2275 "set remotelogbase".
2278 - Martin M. Hunt <hunt@cygnus.com>
2279 (write_register_gen): Add call to
2280 pc_changed_hook if the PC is being changed.
2283 - Martin M. Hunt <hunt@cygnus.com>
2284 (pc_changed_hook): Define.
2287 - Martin M. Hunt <hunt@cygnus.com>
2288 (do_setshow_command): If no arguments are supplied,
2289 don't dump core, instead print out an error message.
2292 - Martin M. Hunt <hunt@cygnus.com>
2293 Make set_raw_breakpoint, set_breakpoint_count,
2294 and breakpoint_count non-static so they are accessible from
2296 (enable_breakpoint): Enable breakpoint
2297 with same disposition instead of changing all breakpoints
2301 - Keith Seitz <keiths@onions.cygnus.com>
2302 Add declarations for annotation hooks.
2305 - Keith Seitz <keiths@onions.cygnus.com>
2306 Add hooks: annotate_starting_hook, annotate_stopped_hook,
2307 annotate_signalled_hook, annotate_exited_hook.
2308 (annotate_starting): If hook exists, call it instead.
2309 (annotate_stopped): If hook exists, call it instead.
2310 (annotate_exited): If hook exists, call it instead.
2311 (annotate_signalled): If hook exists, call it instead.
2313 Fri Mar 20 14:45:36 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
2315 * gdbserver/Makefile.in: add dependency on XM_CLIBS.
2316 * gdbserver/low-sim.c (registers) force into alignment.
2317 (create_inferior): Fix typo on new_argv; add abfd arg to
2318 sim_open, sim_create_inferior. Add reg_size arg to
2319 sim_fetch_register, sim_store_register. Make simulator
2320 take a single-step to get into a known running state.
2321 * gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL.
2322 * gdbserver/server.c: Add remote_debug variable to control
2324 * gdbserver/server.h: Add prototypes for enable/disable_async_io.
2325 * gdbserver/remote-utils.c: add verbose debugging output controlled
2326 by "remote_debug" variable. Add call to "disable_async_io()"
2327 to avoid being killed by async SIGIO signals.
2328 * config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES),
2329 so that gdbserver can be built with the m32r simulator.
2331 Fri Mar 20 09:04:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
2333 start-sanitize-r5900
2334 * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE): Redefine as
2335 expression from REGISTER_VIRTUAL_TYPE.
2336 (REGISTER_RAW_SIZE): Ditto.
2337 (REGISTER_VIRTUAL_TYPE): Redefine, use explicit size for 32 bit
2341 * gdbtypes.h (builtin_type_{,u}int{8,16,32,64}): New gdb builtin
2343 start-sanitize-r5900
2344 (builtin_type_{,u}int128): Ditto.
2347 * gdbtypes.c (_initialize_gdbtypes): Initialize new types.
2349 * mips-tdep.c (do_gp_register_row): Pad register value when GP
2350 register is smaller than MIPS_REGSIZE.
2352 * findvar.c (value_of_register): When raw and virtual register
2353 values identical, check that sizes are consistent.
2355 Thu Mar 19 11:32:15 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2357 * minsyms.c (compare_minimal_symbols): If addresses are identical,
2358 then compare on names. Sorted list should have symbols with
2359 identical addresses AND names adjacent, so dups can be discarded.
2361 Wed Mar 18 12:50:17 1998 Jeff Law (law@cygnus.com)
2363 * stabsread.c (define_symbol): Don't look for ',' as a LRS
2366 Wed Mar 18 10:34:51 1998 Nick Clifton <nickc@cygnus.com>
2368 * rdi-share/etherdrv.c: Set sys_errlist[] as char * not const char *.
2370 Fri Mar 13 15:43:53 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2372 * config/mips/xm-mips.h (CC_HAS_LONG_LONG): Undefine for Ultrix
2373 when compiling with native cc, the compiler has broken long long
2376 Fri Mar 13 15:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2378 * config/m68k/xm-sun3os4.h: Remove malloc declarations, they
2379 are handled via autoconf now.
2380 * remote.c (remote_ops, extended_remote_ops): Replace static
2381 forward declaration by moving the static definition to the top of
2382 the file, for old K&R compilers.
2383 * tracepoint.c (collect_symbol, trace_start_command):
2384 Replace ANSI string concatenation with K&R compatible simple string.
2386 1998-03-11 Fred Fish <fnf@ninemoons.com>
2388 * source.c (select_source_symtab): Don't reach error if we have
2389 a current_source_symtab from reading in partial symbol table.
2391 start-sanitize-vr4320
2392 Tue Mar 10 16:15:13 1998 Gavin Koch <gavin@cygnus.com>
2394 * configure.tgt (mips64*vr4320*el-*-elf*) : Removed spurious case.
2397 Fri Mar 6 13:10:27 1998 Fred Fish <fnf@cygnus.com>
2399 * utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
2400 SERIAL_FLUSH_OUTPUT.
2401 * serial.h (struct serial_ops): Add drain_output, pointer to
2402 function that waits for output to drain.
2403 (SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
2404 * ser-unix.c (hardwire_drain_output): New function and prototype.
2406 * ser-unix.c (hardwire_ops): Add entry for drain_output function.
2407 * ser-tcp.c (tcp_ops): Ditto.
2408 * ser-ocd.c (ocd_ops): Ditto.
2409 * ser-mac.c (mac_ops): Ditto.
2410 * ser-go32.c (dos_ops): Ditto.
2411 * ser-e7kpc.c (e7000pc_ops): Ditto.
2413 Thu Mar 5 16:07:41 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2415 * sparcl-tdep.c: fix #endif comments
2417 Thu Mar 5 15:10:35 1998 Jason Molenda (crash@bugshack.cygnus.com)
2419 * Makefile.in (BISON): Configure substitutes in @YACC@, not @BISON@.
2421 Thu Mar 5 14:42:41 1998 Keith Seitz <keiths@onions.cygnus.com>
2423 * ocd.c (ocd_open): If we fail ocd_start_remote, make sure we
2424 error () so that we abort out of bdm_ppc_open.
2426 Wed Mar 4 16:53:52 1998 Martin M. Hunt <hunt@cygnus.com>
2428 * serial.c (_initialize_serial): Add a description of
2429 "set remotelogbase".
2431 * command.c (do_setshow_command): If no arguments are supplied,
2432 don't dump core, instead print out an error message.
2434 Wed Mar 4 16:50:18 1998 Jason Molenda (crash@bugshack.cygnus.com)
2436 * gdbtk.c (gdb_listfiles): Fix thinko in last change.
2438 Wed Mar 4 15:34:49 1998 Jason Molenda (crash@bugshack.cygnus.com)
2440 * gdbtk.c (gdb_listfiles): Allocate space for 'files' dynamically.
2442 Wed Mar 4 01:39:08 1998 Ron Unrau <runrau@cygnus.com>
2444 * elfread.c (elf_symtab_read): merge SYMBOL_IS_SPECIAL into
2445 MAKE_MSYMBOL_SPECIAL
2446 * config/mips/tm-mips.h: ditto
2448 Tue Mar 3 17:19:08 1998 John Metzler <jmetzler@cygnus.com>
2450 start-sanitize-vr4111
2451 * config/mips/tm-vr4xxx.h: implements vr4111 as separate from 4300
2452 * config/mips/vr4xxx.tm: implements vr4111 as separate from 4300
2453 * configure.tgt: Recognise mips64vr4111-*-elf as vr4xxx
2455 * dwarfread.c (read_tag_pointer_type): Pointer sizes now come from
2456 TARGET_PTR_BIT rather from sizeof(char *) on host.
2458 Tue Mar 3 14:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2460 * alpha-nat.c (fetch_osf_core_registers): Renamed from
2461 fetch_aout_core_registers.
2462 (alpha_osf_core_fns): Renamed from alpha_aout_core_fns, change
2463 flavour to bfd_target_unknown_flavour for OSF core files.
2465 start-sanitize-vr4320
2466 Tue Mar 3 11:12:39 1998 Gavin Koch <gavin@cygnus.com>
2468 * configure.tgt (mips64*vr4320*el-*-elf*,mips64*vr4320*-*-elf*) :
2472 Mon Mar 2 17:44:13 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2474 * breakpoint.c (_initialize_breakpoint): Make "en" an alias
2475 for "enable" (so that it doesn't conflict with "end").
2477 Mon Mar 2 17:04:25 1998 Jason Molenda (crash@bugshack.cygnus.com)
2479 * Makefile (VERSION): Bump to 4.17.1.
2481 Mon Mar 2 16:59:15 1998 Jason Molenda (crash@bugshack.cygnus.com)
2483 * rdi-share/etherdrv.c (sys_errlist): Add correct decl for Linux.
2485 Mon Mar 2 16:51:44 1998 Jason Molenda (crash@bugshack.cygnus.com)
2487 * Makefile.in (YYFILES): Remove in maintainer-clean, not distclean.
2489 Mon Mar 2 16:47:11 1998 Philippe De Muyter <phdm@macqel.be>
2491 * Makefile.in (distclean): Add `rm $(YYFILES)'.
2493 Mon Mar 2 16:45:48 1998 Philippe De Muyter <phdm@macqel.be>
2495 * coffread.c (coff_read_enum_type): Set TYPE_FLAG_UNSIGNED if enum
2498 Sun Mar 2 15:16:13 1998 Richard Henderson <rth@cygnus.com>
2500 * configure.host, configure.tgt: Add sparc-linux.
2501 * sparc-nat.c: Include <asm/reg.h> not <machine/reg.h> for Linux.
2502 * config/sparc/*linux*: New files.
2504 Mon Mar 2 12:12:41 1998 Anthony Thompson (athompso@cambridge.arm.com)
2506 * arm-tdep.c (gdb_print_insn_arm): Call print_insn_big_arm
2507 if we're big endian; else call print_insn_little_arm.
2509 Mon Feb 24 11:24:57 1998 Richard Henderson <rth@cygnus.com>
2511 * Makefile.in (BISON): Don't even pretend to use yacc.
2512 (c-exp.tab.o): Use bison -o to use a unique intermediate file.
2513 (f-exp.tab.o, m2-exp.tab.o): Likewise.
2515 (jv-exp.tab.o): Likewise.
2518 Tue Feb 24 03:32:59 1998 Andrew Cagney <cagney@b1.cygnus.com>
2520 * remote-sim.c (gdbsim_fetch_register): Don't abort when the
2521 register size is wrong.
2523 start-sanitize-r5900
2524 Tue Feb 24 02:53:41 1998 And<rew Cagney <cagney@b1.cygnus.com>
2526 * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE,
2527 REGISTE_RAW_SIZE): Re-define.
2530 Thu Feb 19 16:49:48 1998 John Metzler <jmetzler@cygnus.com>
2532 * target.c (debug_to_fetch_registers,debug_to_store_registers,
2533 debug-to_insert_breakpoint,debug_to_remove_breakpoint): tracing
2534 64 bit targets crashed long long printfs.
2536 Tue Feb 17 16:36:22 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2538 * symfile.c (read_target_int_array): rename read_target_long_array
2539 and force the sizeof an ovly_table element to sizeof(long),
2540 instead of sizeof(int).
2542 Tue Feb 17 18:05:05 1998 Frank Ch. Eigler <fche@cygnus.com>
2544 * remote-mips.c (mips_request): Use unsigned long during parsing
2545 returned value from monitor, to prevent accidental sign extension.
2547 Tue Feb 17 14:28:33 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
2549 * acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE.
2550 * configure.in: Ditto.
2551 * configure: Regenerated.
2553 Tue Feb 17 14:07:34 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
2555 * gdbtypes.c (check_typedef): Do not try to resolve the length of
2556 a type which has TYPE_FLAG_TARGET_STUB set, if the target type has
2557 set TYPE_FLAG_TARGET_STUB as well.
2559 Tue Feb 17 14:32:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
2561 * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
2562 Pass register size to sim_{fetch,store}_register. Check nr of
2563 register bytes transfered is correct.
2565 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
2567 * remote-d10v.c (remote_d10v_open): Call push_remote_target
2568 instead of open_remote_target.
2570 * remote.c (remote_xfer_memory): Use REMOTE_TRANSLATE_XFER_ADDRESS
2571 to translate addr/size when defined.
2572 (open_remote_target): Delete.
2574 * target.h (open_remote_target): Delete.
2576 * config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Define.
2578 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
2580 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
2583 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
2585 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
2588 Sun Feb 15 16:10:50 1998 Ron Unrau <runrau@cygnus.com>
2590 * parse.c (write_dollar_variable): call new function
2591 target_map_name_to_register to allow targets to define their own
2592 register name aliases.
2593 * infcmd.c (registers_info): use target_map_name_to_register so that
2594 "print $reg" and "info reg $reg" use the same register name aliases.
2596 Fri Feb 13 16:40:30 1998 Stan Shebs <shebs@andros.cygnus.com>
2598 * config/i386/i386mk.mt (OBJFORMATS): Delete, no longer used.
2599 * config/i386/xm-i386mk.h: Fix an include.
2600 * config/pyr/tm-pyr.h (PC_INNER_THAN): Remove, never used.
2602 Thu Feb 12 16:12:07 1998 Frank Ch. Eigler <fche@cygnus.com>
2604 * remote-mips.c (mips_enter_debug): Sleep before sending CR to
2606 (mips_exit_debug): Accept any whitespace / verbiage before monitor
2609 Thu Feb 12 18:25:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
2611 * d10v-tdep.c (show_regs): Avoid use of %llx when printing 8 byte
2614 Thu Feb 12 17:10:22 1998 Andrew Cagney <cagney@b1.cygnus.com>
2616 * valops.c (value_at): For d10v, make read pointers with
2617 read_target_unsigned_integer, keep addresses unsigned.
2618 (value_fetch_lazy): Ditto.
2620 Thu Feb 12 12:14:02 1998 Andrew Cagney <cagney@b1.cygnus.com>
2622 * remote-d10v.c: New file. Layer the d10v GDB->remote memory map
2623 on top of the remote serial memory transfer functions.
2625 * config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o
2627 * Makefile.in (remote-d10v.o): Add dependencies.
2629 * remote.c (remote_open_1): Add arg extended_p, engage extended
2630 protocol when extended_p.
2631 (remote_open, extended_remote_open): Pass !extended_p /
2632 extended_p to remote_open_1.
2634 * remote.c (open_remote_target), target.h: New function.
2636 Wed Feb 11 08:41:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
2638 * config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o.
2640 Tue Feb 10 17:50:37 1998 Keith Seitz <keiths@onions.cygnus.com>
2642 * tracepoint.c (tracepoint_operation): Call the modify_tracepoint_hook
2644 Remove static declaration of free_actions.
2646 * tracepoint.h: Add declaration of free_actions.
2648 Tue Feb 10 12:17:13 1998 Fred Fish <fnf@cygnus.com>
2650 * symtab.c (decode_line_1): Revert change that mistakenly
2651 removed assignment of sals[0].pc field.
2653 Mon Feb 10 12:37:47 1998 Philippe De Muyter <phdm@macqel.be>
2655 * m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for
2656 `REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not
2657 `REGISTER_VIRTUAL_TYPE (FP0_REGNUM)';
2658 (STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes'
2659 is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'.
2660 (FRAME_NUM_ARGS): New macro.
2661 * m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto.
2662 * delta68-nat.c (clear_insn_cache): New function, forgotten in previous
2665 Mon Feb 9 11:10:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
2667 * d10v-tdep.c: Replace references to IMEM_ADDR and DMEM_ADDR with
2668 D10V_MAKE_[DI]ADDR and D10V_CONVERT_[ID]ADDR_TO_RAW macros.
2670 * config/d10v/tm-d10v.h (IMEM_START): Move to 0x01......
2671 (DMEM_START): Move to 0x00......
2672 (STACK_START): Move to 0x00..7ffe.
2673 (D10V_MAKE_IADDR, D10V_MAKE_DADDR): Translate unconditionally.
2675 * d10v-tdep.c (d10v_xlate_addr): Delete function.
2677 Mon Feb 9 15:10:21 1998 Fred Fish <fnf@cygnus.com>
2679 * symtab.c (fixup_psymbol_section): Move forward declaration to
2680 top of file with other such decls. Make it a static function.
2681 * symtab.h: Minor formatting tweaks.
2683 Mon Feb 9 13:14:12 1998 Stan Shebs <shebs@andros.cygnus.com>
2685 * config/a29k-udi.mt, config/i960/vxworks960.mt (REMOTE_OBS):
2686 Remove redefinition.
2687 * config/i960/tm-i960.h (BREAKPOINT): Define.
2689 Mon Feb 9 15:35:38 1998 Ian Lance Taylor <ian@cygnus.com>
2691 * Makefile.in (init.c): Ignore errors when making init.c. Seems
2692 necessary to work around bug in Solaris make.
2694 Sun Feb 6 02:44:28 1997 Philippe De Muyter <phdm@macqel.be>
2696 * m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted.
2697 (EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined.
2698 (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified
2699 because floating-point values return via %fp0.
2700 (CLEAR_INSN_CACHE): New macro.
2701 * m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed
2703 (REGISTER_CONVERT_TO_RAW): Ditto.
2704 * infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined,
2705 call it after having written in child process's memory.
2706 * inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO.
2707 (gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO.
2709 Fri Feb 6 16:17:30 1998 Jeffrey A Law (law@cygnus.com)
2711 * config/mips/tm-mips64.h (TARGET_LONG_BIT): Allow final target to
2713 (TARGET_LONG_LONG_BIT): Likewise.
2714 (TARGET_PTR_BIT): Likewise.
2715 start-sanitize-r5900
2716 * config/mips/tm-r5900.h (TARGET_PTR_BIT): Define to 32 bits.
2720 Fri Feb 6 14:33:34 1998 Doug Evans <devans@canuck.cygnus.com>
2722 * configure.tgt (mips64r5900*-sky-elf*): Replaces txvu-elf.
2723 * config/mips/txvu.mt (SIM): txvu -> mips.
2726 Fri Feb 6 17:42:22 1998 Andrew Cagney <cagney@b1.cygnus.com>
2728 * config/d10v/tm-d10v.h (D10V_CONVERT_IADDR_TO_RAW,
2729 D10V_CONVERT_DADDR_TO_RAW): Define.
2731 * d10v-tdep.c (d10v_push_arguments): Re-write. Pass arguments in
2732 registers, regardless of their size, when they fit.
2734 Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
2736 * d10v-tdep.c (d10v_extract_return_value): For function pointers
2737 translate address to IMAP area.
2739 * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete dummy from
2741 (POP_FRAME): Point at generic_pop_current_frame.
2743 * d10v-tdep.c (d10v_pop_frame): Delete code handling dummy frames,
2745 (d10v_push_return_address): New function.
2746 (d10v_pop_dummy_frame): Delete.
2747 (d10v_fix_call_dummy): Delete.
2748 (d10v_call_dummy_address): Delete.
2750 * d10v-tdep.c (d10v_init_extra_frame_info): Clear dummy and
2753 * d10v-tdep.c (d10v_push_arguments): Keep stack word aligned.
2755 * config/d10v/tm-d10v.h (EXTRACT_STRUCT_VALUE_ADDRESS): Extract
2756 address of structure from first ARG1_REGNUM.
2758 * d10v-tdep.c (d10v_push_arguments): Force 4 byte args into
2759 even-odd register pair. Store 1 and 2 byte args in registers.
2761 * valops.c (value_fetch_lazy): Ensure that a D10V function pointer
2762 is fetched in the correct byte order.
2763 (value_at): Ditto. Also ensure data pointers are mapped to data
2766 * config/d10v/tm-d10v.h (D10V_DADDR_P, D10V_IADDR_P):
2768 * d10v-tdep.c: Replace 2 with REGISTER_RAW_SIZE.
2769 (d10v_pop_frame): Replace R13 with LR_REGNUM.
2770 (d10v_push_arguments): Replace R2 with ARG1_REGNUM.
2771 (d10v_push_arguments): Replace 6 with ARGN_REGNUM.
2772 (d10v_extract_return_value): Access return value with RET1_REGNUM.
2774 * config/d10v/tm-d10v.h (ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM):
2776 (STORE_RETURN_VALUE): Specify return register using RET1_REGNUM.
2777 (STORE_STRUCT_RETURN): Specify ARG1_REGNUM as the struct ptr
2780 Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
2782 * blockframe.c (generic_pop_dummy_frame): Flush the frame, no
2785 * blockframe.c (generic_pop_current_frame), frames.h: New
2788 Thu Feb 5 17:18:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
2790 * remote-sim.c (gdbsim_create_inferior): clear_proceed_status
2791 before /re/starting the simulator.
2793 Thu Feb 5 15:55:31 1998 C. M. Heard (heard@vvnet.com)
2795 * top.c (do_nothing): Remove signal handler after signal is caught.
2797 Thu Feb 5 11:57:06 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2799 * tracepoint.c (tracepoint_operation): call free_actions instead
2800 of free. (free_actions): eliminate some memory leaks for actions.
2801 (validate_actionline): pass string arg by reference, so we can
2802 change the pointer. Change all memrange collection arguments to
2803 canonical form (literal address and size), to enforce early
2804 evaluation. Accept UNOP_MEMVAL (assembly variables) for
2805 trace collection. (parse_and_eval_memrange): accept expressions
2806 for the address and size fields of a memrange (and evaluate
2807 them immediately). (several places): use -1 instead of zero
2808 to distinguish an absolute memrange from a register-relative one.
2809 (encode_actions): add handling for UNOP_MEMVAL (assembly variable).
2811 Wed Feb 4 17:40:21 1998 Jason Molenda (crash@bugshack.cygnus.com)
2813 * Makefile.in (SFILES): add tracepoint.c.
2814 (LINTFILES): add @CONFIG_SRCS@.
2816 * configure.in (CONFIG_SRCS): Mirror use of CONFIG_OBS.
2817 * configure: Regenerated.
2819 Tue Feb 3 16:12:32 1998 Gordon W. Ross (gwr@mc.com)
2821 * infptrace.c (child_resume): Don't try to step if
2822 NO_SINGLE_STEP is defined.
2824 Mon Feb 2 19:06:13 1998 Jason Molenda (crash@bugshack.cygnus.com)
2826 * Makefile.in (VERSION): Bump to 4.16.2.
2828 Mon Feb 2 17:18:25 1998 Richard Henderson <rth@cygnus.com>
2830 * alpha-nat.c (fetch_aout_core_registers): Rename from
2831 fetch_core_registers.
2832 (fetch_elf_core_registers): New function.
2833 (supply_gregset): Use ALPHA_REGSET_BASE.
2834 (supply_fpregset): Likewise.
2835 (fill_fpregset): Likewise.
2836 (alpha_aout_core_fns): Rename from alpha_core_fns.
2837 (alpha_elf_core_fns): New.
2838 * config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o.
2840 * config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF.
2841 (TARGET_ELF64): Likewise.
2842 (ALPHA_REGSET_BASE): New.
2843 * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New.
2844 * config/alpha/tm-alphalinux.h: Include tm-sysv4.h.
2846 * solib.c (elf_locate_base): Add TARGET_ELF64 support.
2847 (info_sharedlibary_command): Likewise.
2849 * configure.host: Match alpha*.
2850 * configure.tgt: Likewise.
2852 Fri Jan 30 15:11:38 1998 David Taylor <taylor@texas.cygnus.com>
2854 Changes by <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
2855 * infrun.c (IN_SOLIB_DYNSYM_RESOLVE_CODE): new macro for detecting
2856 whether we are in the dynamic symbol resolution code
2857 (wait_for_inferior): invoke it.
2858 * solib.c (in_svr4_dynsym_resolve_code): new function
2859 (enable_break): record start and end of the dynamic linker
2860 text and plt sections for use in in_svr4_dynsym_resolve_code.
2861 * solib.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): add svr4 definition;
2862 (in_svr4_dynsym_resolve_code): declare it.
2863 * config/nm-gnu.h (solib.h): move inclusion to after definition
2864 of SVR4_SHARED_LIBS.
2865 * config/nm-sysv4.h (solib.h): ditto.
2866 * config/i386/nm-i386sco5.h (solib.h): ditto.
2867 * config/i386/nm-linux.h (solib.h): ditto.
2868 * config/mips/nm-irix5.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): undefine.
2870 Thu Jan 29 19:39:31 1998 Stan Shebs <shebs@andros.cygnus.com>
2872 * coffread.c (coff_symtab_read) [SEM]: Remove code, macro can
2874 * dbxread.c (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]:
2875 Remove, no longer needed.
2876 * hppa-tdep.c (N_SET_MAGIC): Remove, no longer used.
2877 * config/pa/xm-hppab.h (SEEK_SET, SEEK_CUR, SEEK_END): Ditto.
2878 * config/mips/tm-mipsm3.h (NUMERIC_REG_NAMES): Ditto.
2879 * config/mips/mipsm3.mt (TDEPFILES): Remove mipsread.o.
2881 Wed Jan 28 14:46:52 1998 Stan Shebs <shebs@andros.cygnus.com>
2883 Suggested by Chris Walter <walter@budoe.bu.edu>:
2884 * dwarfread.c (set_cu_language): Recognize Fortran.
2885 * dwarf2read.c (set_cu_language): Ditto.
2886 (read_array_type): Fix language test.
2888 Wed Jan 28 12:51:08 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2890 * blockframe.c (generic_frame_chain_valid): A frame pointer may
2891 be valid if it is equal to the frame pointer of its caller (ie.
2892 not necessarily strictly INNER_THAN). Allows frameless functions.
2894 Wed Jan 28 11:23:25 1998 Mark Alexander <marka@cygnus.com>
2896 * monitor.c (monitor_vsprintf): New function to handle
2897 printing of large addresses using %A format specifier.
2898 (monitor_printf_noecho, monitor_printf): Use monitor_vsprintf
2899 instead of vsprintf.
2900 * dve3900-rom.c (_initialize_r3900_rom): Use %A instead of %Lx
2903 Tue Jan 27 16:14:23 1998 Jason Molenda (crash@bugshack.cygnus.com)
2905 * configure.in (CONFIG_LDFLAGS): Only add -export-dynamic
2908 Mon Jan 26 19:07:46 1998 Jason Molenda (crash@bugshack.cygnus.com)
2910 * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset):
2911 Add closing parenthesis. From HJ Lu.
2913 Mon Jan 26 17:54:45 1998 Mark Alexander <marka@cygnus.com>
2915 * dve3900-rom.c: Improve performance by using memory commands
2916 that print less fluff. Minor cosmetic changes.
2917 Eliminate compiler warnings.
2919 Sat Jan 24 23:44:43 1998 Martin M. Hunt <hunt@cygnus.com>
2921 * breakpoint.c (enable_breakpoint): Preserve breakpoint
2922 disposition when enabling a breakpoint.
2924 * symtab.c (find_pc_sect_line): If no symbol information
2925 is found, return correct pc anyway.
2927 Fri Jan 23 17:26:22 1998 Stan Shebs <shebs@andros.cygnus.com>
2929 * configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*,
2930 ns32k-*-mach3*): Fix file names.
2931 (i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config
2932 recognition, no source files for these.
2933 * configure.tgt (powerpc-*-aix4*): Remove config, now identical
2935 * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files,
2938 Fri Jan 23 16:49:41 1998 Mark Alexander <marka@cygnus.com>
2940 * monitor.c (monitor_write, monitor_readchar): New functions.
2941 * monitor.h (monitor_write, monitor_readchar): Declare.
2942 * dve3900-rom.c: Add support for fast loading on ethernet connections.
2944 Fri Jan 23 07:47:06 1998 Fred Fish <fnf@cygnus.com>
2946 * config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }".
2947 (TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp.
2948 (TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp.
2949 (d10v_write_fp, d10v_read_fp): Add prototypes.
2950 * symtab.c (decode_line_1): Remove assignment of sals[0].pc field.
2951 * symfile.c (simple_overlay_update, simple_overlay_update_1):
2952 Ignore the size of overlay sections. This check is redundant anyway.
2953 * printcmd.c (print_frame_args): Ditto.
2954 * valops.c (value_fetch_lazy): Ditto.
2955 * values.c (unpack_long): Ditto.
2956 * d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs,
2957 d10v_init_extra_frame_info): Fix some minor bugs so the finish command
2959 (show_regs): Change num1 and num2 types from "long long" to "LONGEST".
2960 (d10v_read_fp, d10v_write_fp): New functions.
2961 (d10v_push_arguments): Remove unneeded assigns to "val" and "contents".
2962 (d10v_push_arguments): Fix for pointers and structs.
2963 (d10v_extract_return_value): Fix for pointers and chars.
2965 Tue Jan 20 18:53:18 1998 Stan Shebs <shebs@andros.cygnus.com>
2967 * configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config
2968 recognition, no source files for these (note that the i386 Mach
2969 config is for pre-Mach 3).
2970 (mips*-*-mach3*, ns32k-*-mach3*): Fix file names.
2971 * config/mips/mipsel64.mt: Remove, never referenced.
2973 Mon Jan 19 14:01:28 1998 Stan Shebs <shebs@andros.cygnus.com>
2975 * top.c (print_gdb_version): Restore to original message.
2977 Mon Jan 19 13:34:40 1998 Ian Lance Taylor <ian@cygnus.com>
2979 From cgf@bbc.com (Chris Faylor):
2980 * win32-nat.c (child_mourn_inferior): Call ContinueDebugEvent to
2982 (child_kill_inferior): Respond to all debug events as the child is
2985 * Makefile.in (all): Change gdb dependency to gdb$(EXEEXT).
2986 (uninstall): Add $(EXEEXT) to file name to remove.
2987 (gdb$(EXEEXT)): Rename target from plain gdb.
2988 (gdb1$(EXEEXT)): Rename target from plain gdb1.
2989 (clean, mostlyclean): Add $(EXEEXT) to binary names to remove.
2991 1998-01-16 Felix Lee <flee@cygnus.com>
2993 * top.c (print_gdb_version): delete stutter.
2995 Thu Jan 15 12:29:13 1998 Nick Clifton <nickc@cygnus.com>
2997 * remote-rdi.c (arm_rdi_open): Patch from Tony.Thompson@arm.com
2998 to prevent spurous error messages on non-ICE targets.
3000 Wed Jan 14 19:27:02 1998 Stan Shebs <shebs@andros.cygnus.com>
3002 * config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}:
3003 Remove, no longer used.
3005 Wed Jan 14 18:11:26 1998 Michael Meissner <meissner@cygnus.com>
3007 Patch from Jim Wilson.
3008 * d30v-tdep.c (d30v_frame_find_saved_regs_offsets): Properly
3009 declare void function before use.
3011 * config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}.
3013 Tue Jan 13 16:38:48 1998 Fred Fish <fnf@cygnus.com>
3015 * configure.in (--with-mmalloc): Add new configure arg to use the
3016 mmalloc package. Default is to not use it.
3017 (START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not
3019 * acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef.
3020 * configure: Regenerated.
3021 * config.in: Regenerated.
3022 * Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove.
3023 (MMALLOC): Set using configure.
3024 (MMALLOC_CFLAGS): Set using configure.
3026 * config/i386/tm-linux.h (sys_quotactl): Define to 1 rather
3027 than just defining it.
3028 * mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC.
3029 * utils.c (NO_MMALLOC): Use USE_MMALLOC instead.
3030 * objfiles.c: ditto.
3033 * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove.
3034 * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove.
3035 * config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove.
3036 * config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove.
3037 * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove.
3038 * gdbserver/Makefile.in (MMALLOC_*): Remove.
3039 * config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3040 * config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3041 * config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3042 * config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3043 * config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3044 * config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3045 * config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3046 * config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3047 * config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove.
3048 * config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3049 * config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3050 * config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3051 * config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3052 * config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
3054 Mon Jan 12 11:46:51 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
3056 * config/m68k/tm-m68k.h (REGISTER_VIRTUAL_TYPE): make A0 thru A7
3057 default to void pointer type (so that their default radix is hex).
3059 * symtab.c: move rbreak_command from no_class to class_breakpoint
3060 so it will be listed under "help breakpoints".
3062 Sat Jan 10 14:58:04 1998 Stan Shebs <shebs@andros.cygnus.com>
3064 * rdi-share/hostchan.c: Remove gettimeofday declaration.
3066 Thu Jan 8 11:03:59 1998 Nick Clifton <nickc@cygnus.com>
3068 * remote-rdp.c: Applied patches submitted by Tony.Thompson@arm.com
3069 to implement the Angel remote debugging interface.
3071 * Makefile.in: Add build rules for remote-rdi.c and
3072 rdi-share/libangsd.a.
3074 * configure.tgt: Updated from source on branch.
3075 * config/arm/tm-arm.h: Updated from source on branch.
3076 * arm-tdep.c: Updated from source on branch.
3078 * rdi-share: New directory, RDI library contributed by ARM.
3080 Mon Jan 5 20:21:59 1998 Mark Alexander <marka@cygnus.com>
3082 * monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define.
3083 * monitor.c (monitor_wait): Echo program output.
3084 * dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag,
3085 add MO_PRINT_PROGRAM_OUTPUT flag.
3087 Mon Jan 5 18:21:11 1998 David Taylor <taylor@texas.cygnus.com>
3089 * top.h (HAVE_SIGSETJMP): define SIGJMP_BUF, SIGSETJMP, and
3090 SIGLONGJMP appropriately based on whether HAVE_SIGSETJMP is
3092 * top.c (return_to_top_level, catch_errors): use the new macros
3093 * main.c (SET_TOP_LEVEL): ditto.
3094 * config/xm-sysv4.h (HAVE_SIGSETJMP): Define.
3096 Fri Jan 2 18:48:58 1998 Mark Alexander <marka@cygnus.com>
3098 * configure.in: Double up brackets in shell case pattern.
3100 Fri Jan 2 17:06:05 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
3102 * tracepoint.c (finish_tfind_command): improved algorithm for
3103 deciding when we've "stepped" into a new stack frame.
3104 (map_args_over_tracepoints): loop over tracepoint list "safely",
3105 since list elements may be deleted during loop.
3106 (read_actions): add actions to history list.
3108 For older changes see ChangeLog-97
3114 version-control: never