gdb/ChangeLog

   1 2016-12-08  Simon Marchi  <simon.marchi@ericsson.com>
   2             Thomas Schwinge  <thomas@codesourcery.com>
   3
   4         * gnu-nat.c (set_sig_thread_cmd): Use parse_thread_id instead of
   5         global_thread_id_to_ptid.
   6
   7 2016-12-08  Thomas Schwinge  <thomas@codesourcery.com>
   8
   9         * config/i386/i386gnu.mh (%_S.o %_U.o): Add "-x c" to
  10         "COMPILE.post".
  11         * gnu-nat.c: #include Mach/Hurd headers before all others.  Wrap
  12         Mach/Hurd headers and MIG stubs' prototypes in 'extern "C"'.
  13         * i386-gnu-nat.c: Likewise.
  14
  15         * gnu-nat.c (proc_get_exception_port, proc_set_exception_port)
  16         (INF_RESUME_MSGPORT_RPC, proc_get_state, _proc_get_exc_port)
  17         (proc_steal_exc_port, proc_restore_exc_port, make_proc)
  18         (inf_startup, inf_set_pid, inf_validate_procinfo)
  19         (inf_validate_task_sc, inf_set_traced, inf_validate_procs)
  20         (inf_signal, inf_continue, gnu_wait, S_exception_raise_request)
  21         (do_mach_notify_dead_name, S_proc_wait_reply)
  22         (S_msg_sig_post_untraced_reply, S_msg_sig_post_reply)
  23         (port_msgs_queued, gnu_read_inferior, gnu_write_inferior)
  24         (gnu_find_memory_regions, steal_exc_port, thread_takeover_sc_cmd)
  25         (flush_inferior_icache): Instead of "error_t" use "kern_return_t".
  26         * i386-gnu-nat.c (fetch_fpregs, store_fpregs, i386_gnu_dr_get)
  27         (i386_gnu_dr_set): Likewise.
  28
  29         * gnu-nat.c (set_task_pause_cmd, set_signals_cmd)
  30         (set_exceptions_cmd): Add variants taking an "int arg" instead of
  31         a "char *".  Make the "char *" variants use the former.
  32         (set_noninvasive_cmd): Also use the "int arg" variants.
  33
  34         * gnu-nat.c (gnu_create_inferior): Move nested "trace_me"
  35         function...
  36         (gnu_ptrace_me): ... here.
  37
  38         * i386-gnu-nat.c (i386_gnu_dr_set_control_one)
  39         (i386_gnu_dr_set_addr_one): Explicitly cast "void *".
  40
  41 2016-12-07  Thomas Schwinge  <thomas@codesourcery.com>
  42
  43         * gnu-nat.c (set_sig_thread_cmd): Call global_thread_id_to_ptid
  44         instead of thread_id_to_pid.
  45
  46 2016-12-06  Simon Marchi  <simon.marchi@ericsson.com>
  47
  48         * inferior.c (inferior_command): Remove duplicate
  49         find_inferior_id call.
  50
  51 2016-12-06  Yao Qi  <yao.qi@linaro.org>
  52
  53         * frame.c (frame_register_unwind): Set *realnump if *lvalp is
  54         lval_register.
  55         * value.c (deprecated_value_next_frame_id_hack): Assert
  56         value->lval is lval_register.
  57         (deprecated_value_regnum_hack): Likewise.
  58
  59 2016-12-02  Simon Marchi  <simon.marchi@polymtl.ca>
  60
  61         * ui-out.h: Include "common/enum-flags.h".
  62         (enum ui_flags): Rename to ...
  63         (enum ui_out_flag): ... this.
  64         (ui_out_flags): Define enum flag type.
  65         (ui_out_test_flags): Change type of parameter to ui_out_flags.
  66         (ui_out_new): Likewise.
  67         * ui-out.c (ui_out_test_flags): Likewise.
  68         (ui_out_new): Likewise.
  69         * cli-out.c (cli_out_new): Update variable type.
  70         * mi/mi-out.c (mi_out_new): Likewise.
  71         * tui/tui-out.c (tui_out_new): Likewise.
  72
  73 2016-12-02  Pedro Alves  <palves@redhat.com>
  74
  75         * NEWS: Mention that user commands now accept an unlimited number
  76         of arguments.
  77         * cli/cli-script.c: Include <vector>.
  78         (struct string_view): New type.
  79         (MAXUSERARGS): Delete.
  80         (struct user_args): Now a C++ class.
  81         (user_args_stack): New.
  82         (struct scoped_user_args_level): New type.
  83         (execute_user_command): Use scoped_user_args_level.
  84         (arg_cleanup): Delete.
  85         (setup_user_args): Deleted, and refactored as ...
  86         (user_args::user_args): ... this new constructor.  Limit of number
  87         of arguments removed.
  88         (insert_user_defined_cmd_args): Defer to user_args_stack.
  89         (user_args::insert_args): New, bits based on old
  90         insert_user_defined_cmd_args with limit of number of arguments
  91         eliminated.
  92
  93 2016-12-02  Pedro Alves  <palves@redhat.com>
  94
  95         PR cli/20559
  96         * NEWS: Mention "eval" expands user-defined command arguments.
  97         * cli/cli-script.c (execute_control_command): Adjust to rename.
  98         (insert_args): Rename to ...
  99         (insert_user_defined_cmd_args): ... this, and make extern.
 100         * cli/cli-script.h (insert_user_defined_cmd_args): New
 101         declaration.
 102         * printcmd.c: Include "cli/cli-script.h".
 103         (eval_command): Call insert_user_defined_cmd_args.
 104
 105 2016-12-02  Tom Tromey  <tom@tromey.com>
 106
 107         PR symtab/16264:
 108         * dwarf2read.c (struct partial_die_info) <main_subprogram>: New
 109         member.
 110         (add_partial_symbol): Call set_objfile_main_name.
 111         (read_partial_die): Handle DW_AT_main_subprogram.
 112         <DW_AT_calling_convention>: don't call set_objfile_main_name, but
 113         set main_subprogram flag.
 114
 115 2016-12-02  Simon Marchi  <simon.marchi@ericsson.com>
 116
 117         * tracefile-tfile.c (tfile_write_status): Adjust to renames.
 118         * tracefile.c (trace_save_command): Rename to...
 119         (tsave_command): ...this.
 120         (_initialize_tracefile): Adjust to renames.
 121         * tracepoint.c (trace_actions_command): Rename to...
 122         (actions_command): ...this.
 123         (trace_start_command): Rename to...
 124         (tstart_command): ...this, and adjust to renames..
 125         (trace_stop_command): Rename to...
 126         (tstop_command): ...this.
 127         (trace_status_command): Rename to...
 128         (tstatus_command): ...this, and adjust to renames.
 129         (trace_find_command): Rename to...
 130         (tfind_command): ...this.
 131         (trace_find_pc_command): Rename to...
 132         (tfind_pc_command): ...this.
 133         (trace_find_tracepoint_command): Rename to...
 134         (tfind_tracepoint_command): ...this.
 135         (trace_find_line_command): Rename to...
 136         (tfind_line_command): ...this.
 137         (trace_find_range_command): Rename to...
 138         (tfind_range_command): ...this.
 139         (trace_find_outside_command): Rename to...
 140         (tfind_outside_command): ...this.
 141         (trace_dump_command): Rename to...
 142         (tdump_command): ...this.
 143         (tfind_1): Adjust to renames.
 144         (trace_find_end_command): Rename to...
 145         (tfind_end_command): ...this, and adjust to renames..
 146         (trace_status_mi): Adjust to renames.
 147         (parse_trace_status): Adjust to renames.
 148         (_initialize_tracepoint): Adjust to renames.
 149         * tracepoint.h (enum trace_stop_reason) <tstop_command>: Rename
 150         to...
 151         <trace_stop_command>: ...this.
 152
 153 2016-12-02  Simon Marchi  <simon.marchi@ericsson.com>
 154
 155         * mi/mi-out.c (mi_ui_out_data) <suppress_output>: Remove.
 156         (mi_table_body): Remove suppress_output check.
 157         (mi_table_end): Likewise.
 158         (mi_table_header): Likewise.
 159         (mi_begin): Likewise.
 160         (mi_end): Likewise.
 161         (mi_field_int): Likewise.
 162         (mi_field_string): Likewise.
 163         (mi_field_fmt): Likewise.
 164         (mi_out_data_ctor): Likewise.
 165
 166 2016-12-02  Yao Qi  <yao.qi@linaro.org>
 167             Pedro Alves  <palves@redhat.com>
 168
 169         * aarch64-tdep.c (aarch64_analyze_prologue): Recognize STR
 170         instruction.
 171         (aarch64_analyze_prologue_test): More tests.
 172
 173 2016-12-02  Yao Qi  <yao.qi@linaro.org>
 174             Pedro Alves  <palves@redhat.com>
 175
 176         * aarch64-tdep.c: Include "selftest.h".
 177         (abstract_instruction_reader): New class.
 178         (instruction_reader): New class.
 179         (aarch64_analyze_prologue): Add new parameter reader.  Call
 180         reader.read instead of read_memory_unsigned_integer.
 181         [GDB_SELF_TEST] (instruction_reader_test): New class.
 182         (aarch64_analyze_prologue_test): New function.
 183         (_initialize_aarch64_tdep) [GDB_SELF_TEST]: Register
 184         selftests::aarch64_analyze_prologue_test.
 185         * trad-frame.c (trad_frame_cache_zalloc):
 186         (trad_frame_alloc_saved_regs): Add a new function.
 187         * trad-frame.h (trad_frame_alloc_saved_regs): Declare.
 188
 189 2016-12-01  Simon Marchi  <simon.marchi@polymtl.ca>
 190
 191         * ui-out.c (enum ui_out_table_state): Move to class
 192         ui_out_table as ui_out_table::state.
 193         (struct ui_out_table): Change to ...
 194         (class ui_out_table): ... this.
 195         <flag>: Remove.
 196         <entry_level>: Rename to ...
 197         <m_entry_level>: ... this.
 198         <columns>: Rename to ...
 199         <m_nr_cols>: ... this.
 200         <id>: Rename to ...
 201         <m_id>: ... this.
 202         <headers>: Rename to ...
 203         <m_headers>: ... this.
 204         <headers_iterator>: Rename to ...
 205         <m_headers_iterator>: ... this.
 206         <start_body, append_header, start_row, get_next_header,
 207         query_field, current_state, entry_level>: New methods.
 208         (struct ui_out) <table>: Change type to unique_ptr to
 209         ui_out_table.
 210         (append_header_to_list, get_next_header, clear_header_list,
 211         clear_table): Remove.
 212         (ui_out_table_begin): Instantiate ui_out_table object.  Update
 213         table check.
 214         (ui_out_table_body): Update table check, replace code with call
 215         to ui_out_table::start_body.
 216         (ui_out_table_end): Update table check, replace manual cleanup
 217         with assignment of uiout->table unique_ptr to nullptr.
 218         (ui_out_table_header): Update table check, replace call to
 219         append_header_to_list with call to append_header method.
 220         (ui_out_begin): Remove one table state check, update another.
 221         Replace code with call to start_row method.
 222         (verify_field): Update table checks.
 223         (ui_out_query_field): Update table check, replace code with call
 224         to query_field method.
 225         (ui_out_new): Remove table initialization code.
 226
 227 2016-12-01  Simon Marchi  <simon.marchi@polymtl.ca>
 228
 229         * ui-out.c (enum ui_out_table_state): New enum.
 230         (struct ui_out_table) <body_flag>: Remove field.
 231         <state>: New field.
 232         (ui_out_table_begin): Replace usages of body_flag with state.
 233         (ui_out_table_body): Likewise.
 234         (ui_out_table_end): Likewise.
 235         (ui_out_table_header): Likewise.
 236         (ui_out_begin): Likewise.
 237         (verify_field): Likewise.
 238         (ui_out_new): Likewise.
 239
 240 2016-12-01  Simon Marchi  <simon.marchi@polymtl.ca>
 241
 242         * ui-out.h (ui_out_begin_ftype): Remove level parameter.
 243         (ui_out_end_ftype): Likewise.
 244         * ui-out.c (struct ui_out) <level>: Replace field with a method
 245         that dynamically computes the result.
 246         (current_level): Get vector's back item instead of using
 247         uiout->level.
 248         (push_level): Make return type void.
 249         (pop_level): Make return type void and update access to
 250         ui_out::level.
 251         (uo_begin): Remove level parameter.
 252         (uo_end): Likewise.
 253         (ui_out_table_begin): Update access to uiout::level.
 254         (ui_out_begin): Don't read return value from push_level, call
 255         uiout->level() instead, update call to uo_begin.
 256         (ui_out_end): Don't read return value from pop_level, update
 257         call to uo_end.
 258         (verify_field): Update access to uiout->level.
 259         (ui_out_new): Don't initialize ui_out::level, call push_level
 260         to push the initial level instead of doing it by hand.
 261         * cli-out.c (cli_begin): Remove level parameter.
 262         (cli_end): Likewise.
 263         * mi/mi-out.c (mi_begin): Likewise.
 264         (mi_end): Likewise.
 265
 266 2016-12-01  Simon Marchi  <simon.marchi@polymtl.ca>
 267
 268         * ui-out.c (struct ui_out_level): Replace with ...
 269         (class ui_out_level): ... this.
 270         (current_level): Update.
 271         (push_level): Update.
 272         (pop_level): Update.
 273         (verify_field): Update.
 274         (ui_out_new): Update.
 275
 276 2016-12-01  Simon Marchi  <simon.marchi@polymtl.ca>
 277
 278         * ui-out.c (struct ui_out_hdr): Replace with ...
 279         (class ui_out_hdr): ... this.
 280         (append_header_to_list): Update.
 281         (get_next_header): Update.
 282         (ui_out_query_field): Update.
 283
 284 2016-12-01  Simon Marchi  <simon.marchi@polymtl.ca>
 285
 286         * mi/mi-out.c (mi_table_header): Change char * args to
 287         std::string.
 288         * cli-out.c (cli_table_header): Likewise.
 289         * ui-out.h (table_header_ftype): Likewise.
 290         (ui_out_table_header): Constify colhdr argument.
 291         (ui_out_query_field): Constify col_name argument.
 292         * ui-out.c (ui_out_hdr) <col_name, colhdr>: Change type to
 293         std::string.
 294         (uo_table_header): Change char * args to std::string.
 295         (ui_out_table_header): Likewise.
 296         (get_next_header): Constify colhdr argument and adapt.
 297         (clear_header_list): Don't free col_name/colhdr fields.
 298         (append_header_to_list): Change char * args to std::string and
 299         adapt.
 300         (verify_field): Constify variable.
 301         (ui_out_query_field): Constify col_name argument and adapt.
 302         * breakpoint.c (wrap_indent_at_field): Constify variable.
 303
 304 2016-12-01  Simon Marchi  <simon.marchi@polymtl.ca>
 305
 306         * ui-out.c (struct ui_out_hdr) <next>: Remove.
 307         (struct ui_out_table) <header_first, header_last, header_next>: Remove.
 308         <headers, headers_iterator>: New fields.
 309         (ui_out_table_body): Update for the new data structure.
 310         (ui_out_begin): Likewise.
 311         (clear_header_list): Likewise.
 312         (append_header_to_list): Likewise.
 313         (get_next_header): Likewise.
 314         (ui_out_query_field): Likewise.
 315         (ui_out_new): Likewise.
 316
 317 2016-11-30  Simon Marchi  <simon.marchi@polymtl.ca>
 318
 319         * ui-out.c (struct ui_out_table) <id>: Change type to
 320         std::string.
 321         (ui_out_table_begin): Change tblid parameter type to
 322         std::string, adapt code.
 323         update following type change.
 324         (clear_table): Update.
 325         (ui_out_new): Update.
 326
 327 2016-11-30  Simon Marchi  <simon.marchi@polymtl.ca>
 328
 329         * cli-out.h (cli_ui_out_data) <streams>: Change type to
 330         std::vector.
 331         * cli-out.c: Remove vec.h include.
 332         (cli_uiout_dtor): Update.
 333         (cli_field_fmt): Update.
 334         (cli_spaces): Update.
 335         (cli_text): Update.
 336         (cli_message): Update.
 337         (cli_flush): Update.
 338         (cli_redirect): Update.
 339         (out_field_fmt): Update.
 340         (field_separator): Update.
 341         (cli_out_data_ctor): Update.
 342         (cli_out_new): Update.
 343         (cli_out_set_stream): Update.
 344
 345 2016-11-30  Simon Marchi  <simon.marchi@polymtl.ca>
 346
 347         * mi/mi-out.c: Remove vec.h include.
 348         (mi_ui_out_data) <streams>: Change type to std::vector.
 349         (mi_field_string): Update.
 350         (mi_field_fmt): Update.
 351         (mi_flush): Update.
 352         (mi_redirect): Update.
 353         (field_separator): Update.
 354         (mi_open): Update.
 355         (mi_close): Update.
 356         (mi_out_buffered): Update.
 357         (mi_out_rewind): Update.
 358         (mi_out_put): Update.
 359         (mi_out_data_ctor): Update.
 360         (mi_out_data_dtor): Don't free streams.
 361
 362 2016-11-30  Simon Marchi  <simon.marchi@polymtl.ca>
 363
 364         * ui-out.c (ui_out_level_p): Remove typedef.
 365         (DEF_VEC_P (ui_out_level_p)): Remove definition.
 366         (struct ui_out) <levels>: Change type to vector of unique_ptr of
 367         ui_out_level.
 368         (current_level): Update.
 369         (push_level): Update.
 370         (pop_level): Update, don't manually delete the ui_out_level
 371         instance.
 372         (ui_out_new): Update.
 373
 374 2016-11-30  Simon Marchi  <simon.marchi@polymtl.ca>
 375
 376         * cli-out.c (cli_uiout_dtor): Use delete instead of xfree.
 377         (cli_out_new): Use new instead of XNEW.
 378         * mi/mi-out.c (mi_out_data_dtor): Use delete instead of xfree.
 379         (mi_out_new): Use new instead of XNEW.
 380         * tui/tui-out.c (tui_out_new): Likewise.
 381         * ui-out.c (push_level): Likewise.
 382         (pop_level): Use delete instead of xfree.
 383         (clear_header_list): Use delete instead of xfree.
 384         (append_header_to_list): Use new instead of XNEW.
 385         (ui_out_new): Likewise.
 386
 387 2016-11-30  Simon Marchi  <simon.marchi@polymtl.ca>
 388
 389         * disable-implicit-rules.mk: New file.
 390         * Makefile.in: Include disable-implicit-rules.mk.
 391         * data-directory/Makefile.in: Likewise.
 392         * gnulib/Makefile.in: Likewise.
 393
 394 2016-11-30  Yao Qi  <yao.qi@linaro.org>
 395
 396         * arm-tdep.c (arm_scan_prologue): Read memory as unsigned integer.
 397         (arm_exidx_unwind_sniffer): Likewise.
 398
 399 2016-11-28  Simon Marchi  <simon.marchi@polymtl.ca>
 400
 401         * record-full.c (record_full_open_1): Fix debug output.
 402
 403 2016-11-26  Simon Marchi  <simon.marchi@polymtl.ca>
 404
 405         * mi/mi-out.c (mi_message): Remove verbosity argument.
 406         * ada-tasks.c (print_ada_task_info, info_task, task_command):
 407         Update call.
 408         * auto-load.c (auto_load_info_scripts): Likewise.
 409         * breakpoint.c (breakpoint_1, watchpoints_info, tracepoints_info):
 410         Likewise.
 411         * cli-out.c (cli_message): Remove verbosity argument.
 412         * inferior.c (print_inferior): Update call.
 413         * linux-thread-db.c (info_auto_load_libthread_db): Likewise.
 414         * probe.c (info_probes_for_ops): Likewise.
 415         * skip.c (skip_info): Likewise.
 416         * solib.c (info_sharedlibrary_command): Likewise.
 417         * symfile.c (load_progress): Likewise.
 418         * thread.c (print_thread_info_1): Likewise.
 419         * ui-out.c (uo_message, ui_out_message): Remove verbosity argument.
 420         (ui_out_get_verblvl): Remove.
 421         * ui-out.h (ui_out_message): Remove verbosity argument.
 422         (ui_out_get_verblvl): Remove.
 423         (message_ftype): Remove verbosity argument.
 424
 425 2016-11-26  Simon Marchi  <simon.marchi@polymtl.ca>
 426
 427         * mi/mi-out.c (mi_wrap_hint): Constify argument.
 428         * cli-out.c (cli_wrap_hint): Likewise.
 429         * ui-out.c (ui_out_wrap_hint, uo_wrap_hint): Likewise.
 430         * ui-out.h (ui_out_wrap_hint, wrap_hint_ftype): Likewise.
 431         * utils.c (wrap_here): Likewise.
 432         (wrap_indent): Constify.
 433         * utils.h (wrap_here): Constify argument.
 434
 435 2016-11-26  Simon Marchi  <simon.marchi@polymtl.ca>
 436
 437         * ui-out.c (uo_redirect): Return the return value from the
 438         implementation function.
 439
 440 2016-11-26  Simon Marchi  <simon.marchi@polymtl.ca>
 441
 442         * ui-out.c (ui_out_destroy, uo_data_destroy): Remove.
 443         * ui-out.h (ui_out_destroy): Remove.
 444
 445 2016-11-26  Simon Marchi  <simon.marchi@polymtl.ca>
 446
 447         * mi/mi-out.c (ui_out_data): Rename to ...
 448         (mi_ui_out_data): ... this.
 449
 450 2016-11-26  Simon Marchi  <simon.marchi@polymtl.ca>
 451
 452         * ui-out.c (_initialize_ui_out): Remove.
 453         (ui_out_set_flags): Remove.
 454         (ui_out_clear_flags): Remove.
 455         * ui-out.h (ui_out_begin_cleanup_end): Remove.
 456         (ui_out_begin_cleanup_end): Remove.
 457         (ui_out_set_flags): Remove.
 458         (ui_out_clear_flags): Remove.
 459         * mi/mi-out.c (_initialize_mi_out): Remove.
 460         (mi_out_buffered): Remove.
 461         * mi/mi-out.h (mi_out_buffered): Remove.
 462
 463 2016-11-26  Simon Marchi  <simon.marchi@polymtl.ca>
 464
 465         * ui-out.h (struct ui_out_impl): Remove comment.
 466         * ui-out.c (struct ui_out): Remove comment.
 467
 468 2016-11-25  John Baldwin  <jhb@FreeBSD.org>
 469
 470         * contrib/ari/gdb_ari.sh (no parameter function): Remove check.
 471
 472 2016-11-25  Simon Marchi  <simon.marchi@ericsson.com>
 473
 474         * Makefile.in: Fix typo.
 475
 476 2016-11-25  Simon Marchi  <simon.marchi@ericsson.com>
 477
 478         * record-full.c (record_full_resume): Fix typos in comment.
 479
 480 2016-11-25  Simon Marchi  <simon.marchi@ericsson.com>
 481
 482         * infcmd.c (interrupt_command): Fix typo in comment.
 483
 484 2016-11-24  John Baldwin  <jhb@FreeBSD.org>
 485
 486         * ada-lang.c (create_excep_cond_exprs): Do not use 'std::move'.
 487         * ax-gdb.c (agent_eval_command_one): Likewise.
 488         (agent_eval_command_one): Likewise.
 489         * breakpoint.c (parse_cond_to_aexpr): Likewise.
 490         (parse_cmd_to_aexpr): Likewise.
 491         * dtrace-probe.c (dtrace_process_dof_probe): Likewise.
 492         * parse.c (parse_expression_for_completion): Likewise.
 493
 494 2016-11-24  John Baldwin  <jhb@FreeBSD.org>
 495
 496         * common/new-op.c (operator new): Mark 'noexcept'.
 497         (operator new[]): Likewise.
 498
 499 2016-11-24  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 500
 501         * dwarf2loc.c (copy_bitwise): Use memcpy for the middle part, if
 502         it is byte-aligned.
 503
 504 2016-11-24  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 505             Pedro Alves  <palves@redhat.com>
 506
 507         * dwarf2loc.c (bits_to_str, check_copy_bitwise)
 508         (copy_bitwise_tests): New functions.
 509         (_initialize_dwarf2loc): Register the new function
 510         copy_bitwise_tests as a unit test.
 511         * selftest.c (run_self_tests): Improve the failure message's
 512         wording and formatting.
 513
 514 2016-11-24  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 515
 516         * dwarf2loc.c (extract_bits_primitive): Remove.
 517         (extract_bits): Remove.
 518         (copy_bitwise): Rewrite.  Fixes a possible corruption that may
 519         occur for non-byte-aligned copies.
 520
 521 2016-11-24  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 522
 523         PR gdb/12616
 524         * dwarf2read.c (dwarf2_add_field): Handle the DWARF V4 attribute
 525         DW_AT_data_bit_offset.
 526
 527 2016-11-23  Pedro Alves  <palves@redhat.com>
 528
 529         * Makefile.in (SFILES): Add common/run-time-clock.c.
 530         (HFILES_NO_SRCDIR): Add common/run-time-clock.h.
 531         (COMMON_OBS): Add run-time-clock.o.
 532         * common/run-time-clock.c, common/run-time-clock.h: New files.
 533         * defs.h (struct timeval, print_transfer_performance): Delete
 534         declarations.
 535         * event-loop.c (struct gdb_timer) <when>: Now a
 536         std::chrono::steady_clock::time_point.
 537         (create_timer): use std::chrono::steady_clock instead of
 538         gettimeofday.  Use new instead of malloc.
 539         (delete_timer): Use delete instead of xfree.
 540         (duration_cast_timeval): New.
 541         (update_wait_timeout): Use std::chrono::steady_clock instead of
 542         gettimeofday.
 543         * maint.c: Include <chrono> instead of "gdb_sys_time.h", <time.h>
 544         and "timeval-utils.h".
 545         (scoped_command_stats::~scoped_command_stats)
 546         (scoped_command_stats::scoped_command_stats): Use
 547         std::chrono::steady_clock instead of gettimeofday.  Use
 548         user_cpu_time_clock instead of get_run_time.
 549         * maint.h: Include "run-time-clock.h" and <chrono>.
 550         (scoped_command_stats): <m_start_cpu_time>: Now a
 551         user_cpu_time_clock::time_point.
 552         <m_start_wall_time>: Now a std::chrono::steady_clock::time_point.
 553         * mi/mi-main.c: Include "run-time-clock.h" and <chrono> instead of
 554         "gdb_sys_time.h" and <sys/resource.h>.
 555         (rusage): Delete.
 556         (mi_execute_command): Use new instead of XNEW.
 557         (mi_load_progress): Use std::chrono::steady_clock instead of
 558         gettimeofday.
 559         (timestamp): Rewrite in terms of std::chrono::steady_clock,
 560         user_cpu_time_clock and system_cpu_time_clock.
 561         (timeval_diff): Delete.
 562         (print_diff): Adjust to use std::chrono::steady_clock,
 563         user_cpu_time_clock and system_cpu_time_clock.
 564         * mi/mi-parse.h: Include "run-time-clock.h" and <chrono> instead
 565         of "gdb_sys_time.h".
 566         (struct mi_timestamp): Change fields types to
 567         std::chrono::steady_clock::time_point, user_cpu_time_clock::time
 568         and system_cpu_time_clock::time_point, instead of struct timeval.
 569         * symfile.c: Include <chrono> instead of <time.h> and
 570         "gdb_sys_time.h".
 571         (struct time_range): New.
 572         (generic_load): Use std::chrono::steady_clock instead of
 573         gettimeofday.
 574         (print_transfer_performance): Replace timeval parameters with a
 575         std::chrono::steady_clock::duration parameter.  Adjust.
 576         * utils.c: Include <chrono> instead of "timeval-utils.h",
 577         "gdb_sys_time.h", and <time.h>.
 578         (prompt_for_continue_wait_time): Now a
 579         std::chrono::steady_clock::duration.
 580         (defaulted_query, prompt_for_continue): Use
 581         std::chrono::steady_clock instead of
 582         gettimeofday/timeval_sub/timeval_add.
 583         (reset_prompt_for_continue_wait_time): Use
 584         std::chrono::steady_clock::duration instead of struct timeval.
 585         (get_prompt_for_continue_wait_time): Return a
 586         std::chrono::steady_clock::duration instead of struct timeval.
 587         (vfprintf_unfiltered): Use std::chrono::steady_clock instead of
 588         gettimeofday.  Use std::string.  Use '.' instead of ':'.
 589         * utils.h: Include <chrono>.
 590         (get_prompt_for_continue_wait_time): Return a
 591         std::chrono::steady_clock::duration instead of struct timeval.
 592
 593 2016-11-22  Simon Marchi  <simon.marchi@polymtl.ca>
 594
 595         * Makefile.in: Fix whitespace formatting.
 596
 597 2016-11-22  Simon Marchi  <simon.marchi@polymtl.ca>
 598
 599         * Makefile.in (ALL_64_TARGET_OBS, ALL_TARGET_OBS,
 600         HFILES_NO_SRCDIR, ALLDEPFILES): Rename files.
 601         * alphabsd-nat.c: Rename to ...
 602         * alpha-bsd-nat.c: ... this, adjust include.
 603         * alphabsd-tdep.c: Rename to ...
 604         * alpha-bsd-tdep.c: ... this, adjust include.
 605         * alphabsd-tdep.h: Rename to ...
 606         * alpha-bsd-tdep.h: ... this, adjust include barrier and comment.
 607         * alphafbsd-tdep.c: Rename to ...
 608         * alpha-fbsd-tdep.c: ... this.
 609         * alphanbsd-tdep.c: Rename to ...
 610         * alpha-nbsd-tdep.c: ... this, adjust include.
 611         * alphaobsd-tdep.c: Rename to ...
 612         * alpha-obsd-tdep.c: ... this, adjust include.
 613         * amd64bsd-nat.c: Rename to ...
 614         * amd64-bsd-nat.c: ... this, adjust include.
 615         * amd64fbsd-nat.c: Rename to ...
 616         * amd64-fbsd-nat.c: ... this, adjust include.
 617         * amd64fbsd-tdep.c: Rename to ...
 618         * amd64-fbsd-tdep.c: ... this, adjust include.
 619         * amd64nbsd-nat.c: Rename to ...
 620         * amd64-nbsd-nat.c: ... this.
 621         * amd64nbsd-tdep.c: Rename to ...
 622         * amd64-nbsd-tdep.c: ... this.
 623         * amd64obsd-nat.c: Rename to ...
 624         * amd64-obsd-nat.c: ... this.
 625         * amd64obsd-tdep.c: Rename to ...
 626         * amd64-obsd-tdep.c: ... this.
 627         * amd64-tdep.h: Update comments.
 628         * armbsd-tdep.c: Rename to ...
 629         * arm-bsd-tdep.c: ... this.
 630         * armnbsd-nat.c: Rename to ...
 631         * arm-nbsd-nat.c: ... this.
 632         * armnbsd-tdep.c: Rename to ...
 633         * arm-nbsd-tdep.c: ... this.
 634         * armobsd-tdep.c: Rename to ...
 635         * arm-obsd-tdep.c: ... this.
 636         * arm-tdep.h: Update comments.
 637         * hppabsd-tdep.c: Rename to ...
 638         * hppa-bsd-tdep.c: ... this, adjust include.
 639         * hppabsd-tdep.h: Rename to ...
 640         * hppa-bsd-tdep.h: ... this, adjust include barrier and comment.
 641         * hppanbsd-nat.c: Rename to ...
 642         * hppa-nbsd-nat.c: ... this.
 643         * hppanbsd-tdep.c: Rename to ...
 644         * hppa-nbsd-tdep.c: ... this, adjust include.
 645         * hppaobsd-nat.c: Rename to ...
 646         * hppa-obsd-nat.c: ... this.
 647         * hppaobsd-tdep.c: Rename to ...
 648         * hppa-obsd-tdep.c: ... this, adjust include.
 649         * i386bsd-nat.c: Rename to ...
 650         * i386-bsd-nat.c: ... this, adjust include.
 651         * i386bsd-nat.h: Rename to ...
 652         * i386-bsd-nat.h: ... this, adjust include barrier and comment.
 653         * i386bsd-tdep.c: Rename to ...
 654         * i386-bsd-tdep.c: ... this.
 655         * i386fbsd-nat.c: Rename to ...
 656         * i386-fbsd-nat.c: ... this, adjust include.
 657         * i386fbsd-tdep.c: Rename to ...
 658         * i386-fbsd-tdep.c: ... this, adjust include.
 659         * i386fbsd-tdep.h: Rename to ...
 660         * i386-fbsd-tdep.h: ... this, adjust include barrier and comment.
 661         * i386gnu-nat.c: Rename to ...
 662         * i386-gnu-nat.c: ... this.
 663         * i386gnu-tdep.c: Rename to ...
 664         * i386-gnu-tdep.c: ... this.
 665         * i386nbsd-nat.c: Rename to ...
 666         * i386-nbsd-nat.c: ... this, adjust include.
 667         * i386nbsd-tdep.c: Rename to ...
 668         * i386-nbsd-tdep.c: ... this.
 669         * i386obsd-nat.c: Rename to ...
 670         * i386-obsd-nat.c: ... this, adjust include.
 671         * i386obsd-tdep.c: Rename to ...
 672         * i386-obsd-tdep.c: ... this.
 673         * i386v4-nat.c: Rename to ...
 674         * i386-v4-nat.c: ... this.
 675         * i386-tdep.h: Update comments.
 676         * m68k-tdep.h: Update comments.
 677         * m68kbsd-nat.c: Rename to ...
 678         * m68k-bsd-nat.c: ... this.
 679         * m68kbsd-tdep.c: Rename to ...
 680         * m68k-bsd-tdep.c: ... this.
 681         * m68klinux-nat.c: Rename to ...
 682         * m68k-linux-nat.c: ... this.
 683         * m68klinux-tdep.c: Rename to ...
 684         * m68k-linux-tdep.c: ... this.
 685         * m88kbsd-nat.c: Rename to ...
 686         * m88k-bsd-nat.c: ... this.
 687         * mipsnbsd-nat.c: Rename to ...
 688         * mips-nbsd-nat.c: ... this, adjust include.
 689         * mipsnbsd-tdep.c: Rename to ...
 690         * mips-nbsd-tdep.c: ... this, adjust include.
 691         * mipsnbsd-tdep.h: Rename to ...
 692         * mips-nbsd-tdep.h: ... this, adjust include barrier and comment.
 693         * mips64obsd-nat.c: Rename to ...
 694         * mips64-obsd-nat.c: ... this.
 695         * mips64obsd-tdep.c: Rename to ...
 696         * mips64-obsd-tdep.c: ... this.
 697         * ppcfbsd-nat.c: Rename to ...
 698         * ppc-fbsd-nat.c: ... this, adjust include.
 699         * ppcfbsd-tdep.c: Rename to ...
 700         * ppc-fbsd-tdep.c: ... this, adjust include.
 701         * ppcfbsd-tdep.h: Rename to ...
 702         * ppc-fbsd-tdep.h: ... this, adjust include barrier and comment.
 703         * ppcnbsd-nat.c: Rename to ...
 704         * ppc-nbsd-nat.c: ... this, adjust include.
 705         * ppcnbsd-tdep.c: Rename to ...
 706         * ppc-nbsd-tdep.c: ... this, adjust include.
 707         * ppcnbsd-tdep.h: Rename to ...
 708         * ppc-nbsd-tdep.h: ... this, adjust include barrier and comment.
 709         * ppcobsd-nat.c: Rename to ...
 710         * ppc-obsd-nat.c: ... this, adjust include.
 711         * ppcobsd-tdep.c: Rename to ...
 712         * ppc-obsd-tdep.c: ... this, adjust include.
 713         * ppcobsd-tdep.h: Rename to ...
 714         * ppc-obsd-tdep.h: ... this, adjust include barrier and comment.
 715         * shnbsd-nat.c: Rename to ...
 716         * sh-nbsd-nat.c: ... this.
 717         * shnbsd-tdep.c: Rename to ...
 718         * sh-nbsd-tdep.c: ... this.
 719         * sparcnbsd-nat.c: Rename to ...
 720         * sparc-nbsd-nat.c: ... this.
 721         * sparcnbsd-tdep.c: Rename to ...
 722         * sparc-nbsd-tdep.c: ... this.
 723         * sparcobsd-tdep.c: Rename to ...
 724         * sparc-obsd-tdep.c: ... this.
 725         * sparc64fbsd-nat.c: Rename to ...
 726         * sparc64-fbsd-nat.c: ... this.
 727         * sparc64fbsd-tdep.c: Rename to ...
 728         * sparc64-fbsd-tdep.c: ... this.
 729         * sparc64nbsd-nat.c: Rename to ...
 730         * sparc64-nbsd-nat.c: ... this.
 731         * sparc64nbsd-tdep.c: Rename to ...
 732         * sparc64-nbsd-tdep.c: ... this.
 733         * sparc64obsd-nat.c: Rename to ...
 734         * sparc64-obsd-nat.c: ... this.
 735         * sparc64obsd-tdep.c: Rename to ...
 736         * sparc64-obsd-tdep.c: ... this.
 737         * sparc64-tdep.h: Update comments.
 738         * vaxbsd-nat.c: Rename to ...
 739         * vax-bsd-nat.c: ... this.
 740         * vaxnbsd-tdep.c: Rename to ...
 741         * vax-nbsd-tdep.c: ... this.
 742         * vaxobsd-tdep.c: Rename to ...
 743         * vax-obsd-tdep.c: ... this.
 744         * x86bsd-nat.h: Rename to ...
 745         * x86-bsd-nat.h: ... this, adjust include barrier and comment.
 746         * x86bsd-nat.c: Rename to ...
 747         * x86-bsd-nat.c: ... this, adjust include.
 748         * configure.tgt: Update renamed files.
 749         * config/alpha/fbsd.mh: Update renamed files.
 750         * config/alpha/nbsd.mh: Update renamed files.
 751         * config/arm/nbsdelf.mh: Update renamed files.
 752         * config/djgpp/fnchange.lst: Update renamed files.
 753         * config/i386/fbsd.mh: Update renamed files.
 754         * config/i386/fbsd64.mh: Update renamed files.
 755         * config/i386/i386gnu.mh: Update renamed files.
 756         * config/i386/i386sol2.mh: Update renamed files.
 757         * config/i386/nbsd64.mh: Update renamed files.
 758         * config/i386/nbsdelf.mh: Update renamed files.
 759         * config/i386/obsd.mh: Update renamed files.
 760         * config/i386/obsd64.mh: Update renamed files.
 761         * config/i386/sol2-64.mh: Update renamed files.
 762         * config/m68k/linux.mh: Update renamed files.
 763         * config/m68k/nbsdelf.mh: Update renamed files.
 764         * config/m68k/obsd.mh: Update renamed files.
 765         * config/m88k/obsd.mh: Update renamed files.
 766         * config/mips/nbsd.mh: Update renamed files.
 767         * config/mips/obsd64.mh: Update renamed files.
 768         * config/pa/nbsd.mh: Update renamed files.
 769         * config/pa/obsd.mh: Update renamed files.
 770         * config/powerpc/fbsd.mh: Update renamed files.
 771         * config/powerpc/nbsd.mh: Update renamed files.
 772         * config/powerpc/obsd.mh: Update renamed files.
 773         * config/sh/nbsd.mh: Update renamed files.
 774         * config/sparc/fbsd.mh: Update renamed files.
 775         * config/sparc/nbsd64.mh: Update renamed files.
 776         * config/sparc/nbsdelf.mh: Update renamed files.
 777         * config/sparc/obsd64.mh: Update renamed files.
 778         * config/vax/nbsdelf.mh: Update renamed files.
 779         * config/vax/obsd.mh: Update renamed files.
 780
 781 2016-11-22  Simon Marchi  <simon.marchi@polymtl.ca>
 782
 783         * Makefile.in: Add comment about file lists ordering.
 784         (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_MI_OBS, SUBDIR_MI_SRCS,
 785         SUBDIR_TUI_OBS, SUBDIR_TUI_SRCS, SUBDIR_GCC_COMPILE_OBS,
 786         SUBDIR_GCC_COMPILE_SRCS, SUBDIR_GUILE_OBS, SUBDIR_GUILE_SRCS,
 787         SUBDIR_PYTHON_OBS, SUBDIR_PYTHON_SRCS, SUBDIR_GDBTK_OBS,
 788         SUBDIR_GDBTK_SRCS, XMLFILES, REMOTE_OBS, ALL_64_TARGET_OBS,
 789         ALL_TARGET_OBS, SFILES, HFILES_NO_SRCDIR, HFILES_WITH_SRCDIR,
 790         COMMON_OBS, YYFILES, YYOBJ, generated_files, ALLDEPFILES):
 791         Flatten list and order alphabetically.
 792         * data-directory/Makefile.in: Add comment about file lists
 793         ordering.
 794         (GEN_SYSCALLS_FILES, PYTHON_FILE_LIST): Flatten list and order
 795         alphabetically.
 796
 797 2016-11-22  Ambrogino Modigliani  <ambrogino.modigliani@gmail.com>
 798
 799         * contrib/expect-read1.sh: Fix spelling in comments.
 800         * gdb_buildall.sh: Fix spelling in comments.
 801         * gdb_mbuild.sh: Fix spelling in comments.
 802
 803 2016-11-22  Ambrogino Modigliani  <ambrogino.modigliani@gmail.com>
 804
 805         * configure.ac: Fix spelling in comments.
 806         * configure: Regenerate.
 807
 808 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 809
 810         * gdbarch.sh (software_single_step): Change parameter from frame_info
 811         to regcache.
 812         * gdbarch.c, gdbarch.h: Regenerated.
 813         * aarch64-tdep.c (aarch64_software_single_step): Change parameter
 814         from frame_info to regcache.  Don't call get_current_regcache.
 815         * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise.
 816         (alpha_software_single_step): Likewise.
 817         * alpha-tdep.h (alpha_software_single_step): Update declaration.
 818         * arm-linux-tdep.c (arm_linux_software_single_step): Likewise.
 819         * arm-tdep.c (arm_software_single_step): Likewise.
 820         * arm-tdep.h (arm_software_single_step): Likewise.
 821         * breakpoint.c (insert_single_step_breakpoint): Pass regcache to
 822         gdbarch_software_single_step.
 823         * cris-tdep.c (cris_software_single_step): Change parameter from
 824         frame_info to regcache.  Don't call get_current_regcache.
 825         * mips-tdep.c (mips_software_single_step): Likewise.
 826         * mips-tdep.h (mips_software_single_step): Update declaration.
 827         * moxie-tdep.c (moxie_software_single_step): Likewise.
 828         * nios2-tdep.c (nios2_software_single_step): Likewise.
 829         * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration.
 830         * rs6000-aix-tdep.c (rs6000_software_single_step): Likewise.
 831         * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
 832         * s390-linux-tdep.c (s390_software_single_step): Likewise.
 833         * sparc-tdep.c (sparc_software_single_step): Likewise.
 834         * spu-tdep.c (spu_software_single_step): Likewise.
 835         * tic6x-tdep.c (tic6x_software_single_step): Likewise.
 836
 837 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 838
 839         * spu-tdep.c (spu_software_single_step): Call get_regcache_arch
 840         instead of get_frame_arch.  Call regcache_read_pc instead of
 841         get_frame_pc.  Call regcache_raw_get_unsigned instead of
 842         get_frame_register_unsigned.
 843
 844 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 845
 846         * tic6x-tdep.c (tic6x_condition_true): Replace frame with
 847         regcache.  Call regcache_raw_get_signed instead of
 848         get_frame_register_signed.
 849         (tic6x_get_next_pc): Likewise.  Caller updated.
 850
 851 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 852
 853         * rs6000-aix-tdep.c (branch_dest): Replace parameter frame with
 854         regcache.  Call get_regcache_arch instead of get_frame_arch.
 855         Call regcache_raw_get_unsigned instead of
 856         get_frame_register_unsigned.
 857         (rs6000_software_single_step): Likewise.
 858         * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Call
 859         get_regcache_arch instead of get_frame_arch.  Call
 860         regcache_read_pc instead of get_frame_pc.
 861
 862 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 863
 864         * s390-linux-tdep.c (s390_software_single_step): Call
 865         get_regcache_arch instead of get_frame_arch.  Call
 866         regcache_read_pc instead of get_frame_pc.
 867
 868 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 869
 870         * sparc-tdep.c (sparc_analyze_control_transfer): Replace parameter
 871         frame with regcache.  Call get_current_frame.
 872         (sparc_software_single_step): Call get_regcache_arch instead of
 873         get_frame_arch.  Call regcache_raw_get_unsigned instead of
 874         get_frame_register_unsigned.
 875
 876 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 877
 878         * nios2-tdep.c (nios2_get_next_pc): Replace parameter frame
 879         with regcache.  Call regcache_raw_get_signed instead of
 880         get_frame_register_unsigned.
 881         (nios2_software_single_step): Call get_regcache_arch
 882         instead of get_frame_arch.
 883
 884 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 885
 886         * moxie-tdep.c (moxie_software_single_step): Call
 887         get_regcache_arch instead of get_frame_arch.  Call
 888         regcache_read_pc instead of get_frame_pc.
 889
 890 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 891
 892         * mips-tdep.c (mips32_bc1_pc): Replace parameter frame with
 893         regcache.  Call regcache_raw_get_unsigned instead of
 894         get_frame_register_unsigned.
 895         (mips32_next_pc): Likewise.
 896         (micromips_bc1_pc): Likewise.
 897         (micromips_next_pc): Likewise.
 898         (extended_mips16_next_pc): Likewise.
 899         (mips16_next_pc): Likewise.
 900         (mips_next_pc): Likewise.
 901         (mips_software_single_step): Call get_regcache_arch instead
 902         of get_frame_arch.
 903
 904 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 905
 906         * cris-tdep.c (find_step_target): Replace parameter frame
 907         with regcache.  Call get_regcache_arch instead of
 908         get_frame_arch.  Call regcache_raw_get_unsigned instead of
 909         get_frame_register_unsigned.
 910         (cris_software_single_step): Call get_regcache_arch instead
 911         of get_frame_arch.
 912
 913 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 914
 915         * alpha-tdep.c (alpha_deal_with_atomic_sequence): Call
 916         get_regcache_arch instead of get_frame_arch.  Call
 917         regcache_read_pc instead of get_frame_pc.
 918         (alpha_next_pc): Replace parameter frame with regcache.
 919         Call regcache_raw_get_unsigned instead of
 920         get_frame_register_unsigned.
 921
 922 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 923
 924         * aarch64-tdep.c (aarch64_software_single_step): Call
 925         get_regcache_arch instead of get_frame_arch.  Call
 926         regcache_read_pc instead of get_frame_pc.
 927
 928 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 929
 930         * regcache.c (regcache_raw_get_signed): New function.
 931         * regcache.h (regcache_raw_get_signed): Declare.
 932
 933 2016-11-22  Yao Qi  <yao.qi@linaro.org>
 934
 935         * value.c (value_from_component): Use VALUE_NEXT_FRAME_ID
 936         instead of VALUE_FROM_ID.
 937
 938 2016-11-21  Simon Marchi  <simon.marchi@ericsson.com>
 939
 940         * Makefile.in (%o: $(srcdir)/mi/%.c): Add missing POSTCOMPILE
 941         step.
 942
 943 2016-11-21  Yao Qi  <yao.qi@linaro.org>
 944
 945         * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
 946         Don't call value_from_contents_and_address and
 947         set_value_address.  Call value_from_component.
 948         * python/py-prettyprint.c (gdbpy_apply_val_pretty_printer):
 949         Likewise.
 950         * value.c (value_from_component): New function.
 951         * value.h (value_from_component): Likewise.
 952         * valarith.c (value_subscripted_rvalue): Call
 953         value_from_component.
 954
 955 2016-11-19  Joel Brobecker  <brobecker@adacore.com>
 956
 957         * contrib/ari/gdb_ari.sh: Add detection of printf_vma and
 958         sprintf_vma.
 959
 960 2016-11-18  Simon Marchi  <simon.marchi@polymtl.ca>
 961
 962         * Makefile.in (%.o: $(srcdir)/gdbtk/generic/%.c): Fix typo.
 963
 964 2016-11-17  Simon Marchi  <simon.marchi@polymtl.ca>
 965
 966         (PYTHON_CFLAGS): Move up.
 967         (%.o: $(srcdir)/arch/%.c): New rule.
 968         (%.o: $(srcdir)/cli/%.c): New rule.
 969         (%.o: $(srcdir)/common/%.c): New rule.
 970         (%.o: $(srcdir)/compile/%.c): New rule.
 971         (%.o: $(srcdir)/gdbtk/generic/%.c): New rule.
 972         (%.o: $(srcdir)/guile/%.c): New rule.
 973         (%.o: $(srcdir)/mi/%.c): New rule.
 974         (%.o: $(srcdir)/nat/%.c): New rule.
 975         (%.o: $(srcdir)/python/%.c): New rule.
 976         (%.o: $(srcdir)/target/%.c): New rule.
 977         (%.o: $(srcdir)/tui/%.c): New rule.
 978         (cli-cmds.o): Remove.
 979         (cli-decode.o): Likewise.
 980         (cli-dump.o): Likewise.
 981         (cli-interp.o): Likewise.
 982         (cli-logging.o): Likewise.
 983         (cli-script.o): Likewise.
 984         (cli-setshow.o): Likewise.
 985         (cli-utils.o): Likewise.
 986         (compile.o): Likewise.
 987         (compile-c-types.o): Likewise.
 988         (compile-c-symbols.o): Likewise.
 989         (compile-object-load.o): Likewise.
 990         (compile-object-run.o): Likewise.
 991         (compile-loc2c.o): Likewise.
 992         (compile-c-support.o): Likewise.
 993         (gdbtk.o): Likewise.
 994         (gdbtk-bp.o): Likewise.
 995         (gdbtk-cmds.o): Likewise.
 996         (gdbtk-hooks.o): Likewise.
 997         (gdbtk-interp.o): Likewise.
 998         (gdbtk-main.o): Likewise.
 999         (gdbtk-register.o): Likewise.
1000         (gdbtk-stack.o): Likewise.
1001         (gdbtk-varobj.o): Likewise.
1002         (gdbtk-wrapper.o): Likewise.
1003         (mi-cmd-break.o): Likewise.
1004         (mi-cmd-catch.o): Likewise.
1005         (mi-cmd-disas.o): Likewise.
1006         (mi-cmd-env.o): Likewise.
1007         (mi-cmd-file.o): Likewise.
1008         (mi-cmd-info.o): Likewise.
1009         (mi-cmds.o): Likewise.
1010         (mi-cmd-stack.o): Likewise.
1011         (mi-cmd-target.o): Likewise.
1012         (mi-cmd-var.o): Likewise.
1013         (mi-console.o): Likewise.
1014         (mi-getopt.o): Likewise.
1015         (mi-interp.o): Likewise.
1016         (mi-main.o): Likewise.
1017         (mi-out.o): Likewise.
1018         (mi-parse.o): Likewise.
1019         (mi-symbol-cmds.o): Likewise.
1020         (mi-common.o): Likewise.
1021         (signals.o): Likewise.
1022         (common-utils.o): Likewise.
1023         (gdb_vecs.o): Likewise.
1024         (xml-utils.o): Likewise.
1025         (ptid.o): Likewise.
1026         (buffer.o): Likewise.
1027         (filestuff.o): Likewise.
1028         (format.o): Likewise.
1029         (vec.o): Likewise.
1030         (print-utils.o): Likewise.
1031         (rsp-low.o): Likewise.
1032         (errors.o): Likewise.
1033         (common-debug.o): Likewise.
1034         (cleanups.o): Likewise.
1035         (common-exceptions.o
1036         (posix-strerror.o): Likewise.
1037         (mingw-strerror.o): Likewise.
1038         (btrace-common.o): Likewise.
1039         (fileio.o): Likewise.
1040         (common-regcache.o): Likewise.
1041         (signals-state-save-restore.o): Likewise.
1042         (new-op.o): Likewise.
1043         (waitstatus.o): Likewise.
1044         (arm.o): Likewise.
1045         (arm-linux.o): Likewise.
1046         (arm-get-next-pcs.o): Likewise.
1047         (x86-dregs.o): Likewise.
1048         (linux-btrace.o): Likewise.
1049         (linux-osdata.o): Likewise.
1050         (linux-procfs.o): Likewise.
1051         (linux-ptrace.o): Likewise.
1052         (linux-waitpid.o): Likewise.
1053         (mips-linux-watch.o): Likewise.
1054         (ppc-linux.o): Likewise.
1055         (linux-personality.o): Likewise.
1056         (x86-linux.o): Likewise.
1057         (x86-linux-dregs.o): Likewise.
1058         (amd64-linux-siginfo.o): Likewise.
1059         (linux-namespaces.o): Likewise.
1060         (aarch64-linux-hw-point.o): Likewise.
1061         (aarch64-linux.o): Likewise.
1062         (aarch64-insn.o): Likewise.
1063         (tui.o): Likewise.
1064         (tui-command.o): Likewise.
1065         (tui-data.o): Likewise.
1066         (tui-disasm.o): Likewise.
1067         (tui-file.o): Likewise.
1068         (tui-hooks.o): Likewise.
1069         (tui-interp.o): Likewise.
1070         (tui-io.o): Likewise.
1071         (tui-layout.o): Likewise.
1072         (tui-out.o): Likewise.
1073         (tui-regs.o): Likewise.
1074         (tui-source.o): Likewise.
1075         (tui-stack.o): Likewise.
1076         (tui-win.o): Likewise.
1077         (tui-windata.o): Likewise.
1078         (tui-wingeneral.o): Likewise.
1079         (tui-winsource.o): Likewise.
1080         (guile.o): Likewise.
1081         (scm-arch.o): Likewise.
1082         (scm-auto-load.o): Likewise.
1083         (scm-block.o): Likewise.
1084         (scm-breakpoint.o): Likewise.
1085         (scm-cmd.o): Likewise.
1086         (scm-disasm.o): Likewise.
1087         (scm-exception.o): Likewise.
1088         (scm-frame.o): Likewise.
1089         (scm-gsmob.o): Likewise.
1090         (scm-iterator.o): Likewise.
1091         (scm-lazy-string.o): Likewise.
1092         (scm-math.o): Likewise.
1093         (scm-objfile.o): Likewise.
1094         (scm-param.o): Likewise.
1095         (scm-ports.o): Likewise.
1096         (scm-pretty-print.o): Likewise.
1097         (scm-progspace.o): Likewise.
1098         (scm-safe-call.o): Likewise.
1099         (scm-string.o): Likewise.
1100         (scm-symbol.o): Likewise.
1101         (scm-symtab.o): Likewise.
1102         (scm-type.o): Likewise.
1103         (scm-utils.o): Likewise.
1104         (scm-value.o): Likewise.
1105         (python.o): Likewise.
1106         (py-arch.o): Likewise.
1107         (py-auto-load.o): Likewise.
1108         (py-block.o): Likewise.
1109         (py-bpevent.o): Likewise.
1110         (py-breakpoint.o): Likewise.
1111         (py-cmd.o): Likewise.
1112         (py-continueevent.o): Likewise.
1113         (py-xmethods.o): Likewise.
1114         (py-event.o): Likewise.
1115         (py-evtregistry.o): Likewise.
1116         (py-evts.o): Likewise.
1117         (py-exitedevent.o): Likewise.
1118         (py-finishbreakpoint.o): Likewise.
1119         (py-frame.o): Likewise.
1120         (py-framefilter.o): Likewise.
1121         (py-function.o): Likewise.
1122         (py-gdb-readline.o): Likewise.
1123         (py-inferior.o): Likewise.
1124         (py-infevents.o): Likewise.
1125         (py-infthread.o): Likewise.
1126         (py-lazy-string.o): Likewise.
1127         (py-linetable.o): Likewise.
1128         (py-newobjfileevent.o): Likewise.
1129         (py-objfile.o): Likewise.
1130         (py-param.o): Likewise.
1131         (py-prettyprint.o): Likewise.
1132         (py-progspace.o): Likewise.
1133         (py-signalevent.o): Likewise.
1134         (py-stopevent.o): Likewise.
1135         (py-symbol.o): Likewise.
1136         (py-symtab.o): Likewise.
1137         (py-threadevent.o): Likewise.
1138         (py-type.o): Likewise.
1139         (py-unwind.o): Likewise.
1140         (py-utils.o): Likewise.
1141         (py-value.o): Likewise.
1142         (py-varobj.o): Likewise.
1143
1144 2016-11-17  Simon Marchi  <simon.marchi@polymtl.ca>
1145
1146         * Makefile.in (.c.o): Replace rule with ...
1147         (%.o: %.c): ... this one.
1148         (.po.gmo): Replace rule with ...
1149         (%.gmo: %.po): ... this one.
1150         (.po.pox): Replace rule with ...
1151         (%.pox: %.po): ... this one.
1152         (.y.c): Replace rule with ...
1153         (%.c: %.y): ... this one.
1154         (.l.c): Replace rule with ...
1155         (%.c: %.l): ... this one.
1156         (.SUFFIXES): Remove all instances.
1157
1158 2016-11-17  Simon Marchi  <simon.marchi@polymtl.ca>
1159
1160         * Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
1161         prefixed with @GMAKE_FALSE@.  Update comment related to non-GNU
1162         make.
1163         * configure.ac: Remove checks for the make program.
1164         * configure: Re-generate.
1165
1166 2016-11-17  Simon Marchi  <simon.marchi@polymtl.ca>
1167
1168         * NEWS: Mention requirement of GNU make.
1169
1170 2016-11-17  Pedro Alves  <palves@redhat.com>
1171
1172         * c-exp.y (c_print_token): Use parser_fprintf instead of fprintf.
1173
1174 2016-11-17  Pedro Alves  <palves@redhat.com>
1175
1176         * ctf.c [USE_WIN32API] (mkdir): Delete.
1177
1178 2016-11-16  Pedro Alves  <palves@redhat.com>
1179
1180         * ada-lang.c (ada_value_primitive_packed_val): Use unique_ptr and
1181         new gdb_byte[] instead of malloc and cleanups.
1182
1183 2016-11-17  Pedro Alves  <palves@redhat.com>
1184
1185         * tracepoint.c (collection_list::add_memrange): Add gdbarch
1186         parameter.  Use paddress instead of printf_vma.  Adjust recursive
1187         calls.
1188         (collection_list::stringify): Use paddress and phex_nz instead of
1189         sprintf_vma.  Adjust add_memrange call.
1190         * tracepoint.h (collection_list::add_memrange): Add gdbarch
1191         parameter.
1192
1193 2016-11-16  Kevin Buettner  <kevinb@redhat.com>
1194
1195         * frame.c (get_prev_frame): Stash frame id for current frame
1196         prior to computing frame id for previous frame.
1197
1198 2016-11-16  Kevin Buettner  <kevinb@redhat.com>
1199
1200         * python/py-unwind.c (pending_framepy_read_register): Use
1201         value_of_register() instead of get_frame_register_value().
1202
1203 2016-11-16  Kevin Buettner  <kevinb@redhat.com>
1204
1205         * value.h (VALUE_FRAME_ID): Rename to VALUE_NEXT_FRAME_ID. Update
1206         comment.  Create new VALUE_FRAME_ID which is defined in terms of
1207         VALUE_NEXT_FRAME_ID.
1208         (deprecated_value_frame_id_hack): Rename to
1209         deprecated_value_next_frame_id_hack.
1210         * dwarf2loc.c, findvar.c, frame-unwind.c, sentinel-frame.c,
1211         valarith.c, valops.c, value.c: Adjust nearly all occurences of
1212         VALUE_FRAME_ID to VALUE_NEXT_FRAME_ID.  Add comments for those
1213         which did not change.
1214         * value.c (struct value): Rename frame_id field to next_frame_id.
1215         Update comment.
1216         (deprecated_value_frame_id_hack): Rename to
1217         deprecated_value_next_frame_id_hack.
1218         (value_fetch_lazy): Call frame_unwind_register_value()
1219         instead of get_frame_register_value().
1220         * frame.c (get_prev_frame_id_by_id): New function.
1221         * frame.h (get_prev_frame_id_by_id): Declare.
1222         * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Make
1223         VALUE_NEXT_FRAME_ID refer to the next frame.
1224         * findvar.c (value_of_register_lazy): Likewise.
1225         (default_value_from_register): Likewise.
1226         (value_from_register): Likewise.
1227         * frame_unwind.c (frame_unwind_got_optimized): Likewise.
1228         * sentinel-frame.c (sentinel_frame_prev_register): Likewise.
1229         * value.h (VALUE_FRAME_ID): Update comment describing this macro.
1230
1231 2016-11-16  Kevin Buettner  <kevinb@redhat.com>
1232
1233         * frame.h (enum frame_id_stack_status): Add FID_STACK_SENTINEL.
1234         (struct frame_id): Increase number of bits required for storing
1235         stack status to 3 from 2.
1236         (sentinel_frame_id): New declaration.
1237         (get_next_frame_sentinel_okay): Declare.
1238         (frame_find_by_id_sentinel_okay): Declare.
1239         * frame.c (current_frame): Rename this static global to...
1240         (sentinel_frame): ...this static global, which has also been
1241         moved an earlier location in the file.
1242         (fprint_frame_id): Add case for sentinel frame id.
1243         (get_frame_id): Return early for sentinel frame.
1244         (sentinel_frame_id): Define.
1245         (frame_find_by_id): Add case for sentinel_frame_id.
1246         (create_sentinel_frame): Use sentinel_frame_id for this_id.value
1247         instead of null_frame_id.
1248         (get_current_frame): Add local declaration for `current_frame'.
1249         Remove local declaration for `sentinel_frame.'
1250         (get_next_frame_sentinel_okay): New function.
1251         (reinit_frame_cache): Use `sentinel_frame' in place of
1252         `current_frame'.
1253
1254 2016-11-15  Pedro Alves  <palves@redhat.com>
1255
1256         * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
1257         38237baf99386101934cd93278023aa4ae523ec0.
1258         * gnulib/configure, gnulib/config.in: Regenerate.
1259         * gnulib/import/Makefile.am: Regenerate.
1260         * gnulib/import/Makefile.in: Regenerate.
1261         * gnulib/import/canonicalize-lgpl.c: Update.
1262         * gnulib/import/extra/snippet/c++defs.h: Update.
1263         * gnulib/import/m4/stdint.m4: Update.
1264         * gnulib/import/m4/stdlib_h.m4: Update.
1265         * gnulib/import/math.in.h: Update.
1266         * gnulib/import/stdlib.in.h: Update.
1267         * gnulib/import/sys_time.in.h: Update.
1268
1269 2016-11-15  Pedro Alves  <palves@redhat.com>
1270
1271         * common/common-defs.h: Update comment.
1272         * common/gdb_unique_ptr.h: Update header comment and copyright
1273         year.
1274         (gdb::unique_ptr, gdb::move): Delete.
1275
1276 2016-11-15  Pedro Alves  <palves@redhat.com>
1277
1278         * ada-lang.c (create_excep_cond_exprs): Use std::move instead of
1279         gdb::move.
1280         * break-catch-throw.c (handle_gnu_v3_exceptions): Use
1281         std::unique_ptr instead of gdb::unique_ptr.
1282         * breakpoint.c (watch_command_1): Use std::move instead of
1283         gdb::move.
1284         * cli/cli-dump.c (dump_memory_to_file, restore_binary_file): Use
1285         std::unique_ptr instead of gdb::unique_ptr.
1286         * dtrace-probe.c (dtrace_process_dof_probe): Use std::move instead
1287         of gdb::move.
1288         * elfread.c (elf_read_minimal_symbols): Use std::unique_ptr
1289         instead of gdb::unique_ptr.
1290         * mi/mi-main.c (mi_cmd_data_read_memory): Use std::unique_ptr
1291         instead of gdb::unique_ptr.
1292         * parse.c (parse_expression_for_completion): Use std::move instead
1293         of gdb::move.
1294         * printcmd.c (display_command): std::move instead of gdb::move.
1295
1296 2016-11-14  Markus Metzger  <markus.t.metzger@intel.com>
1297
1298         * nat/linux-btrace.c (perf_event_read): Allow data_head < size.
1299         * nat/linux-btrace.c (perf_event_read_all): Do not adjust size.
1300
1301 2016-11-12  Tom Tromey  <tom@tromey.com>
1302
1303         * rust-exp.y (super_name): Use std::vector.
1304         (lex_number): Use std::string.
1305         (convert_params_to_types): Return std::vector.
1306         (convert_ast_to_type, convert_name): Update.
1307         * rust-lang.c (rust_get_disr_info): Use unique_xmalloc_ptr.
1308
1309 2016-11-12  Tom Tromey  <tom@tromey.com>
1310
1311         * rust-lang.c (rust_get_disr_info): Use std::string in one more
1312         spot.
1313
1314 2016-11-11  Yao Qi  <yao.qi@linaro.org>
1315
1316         * spu-tdep.c (spu_software_single_step): Don't call
1317         get_frame_register_bytes, call get_frame_register_unsigned
1318         instead.
1319
1320 2016-11-11  Yao Qi  <yao.qi@linaro.org>
1321
1322         * cp-valprint.c (cp_print_value): Remove local base_valaddr.
1323         * extension-priv.h (struct extension_language_ops)
1324         <apply_val_pretty_printer>: Remove the second parameter.
1325         Remove const from "struct value *".  Callers updated.
1326         * extension.c (apply_ext_lang_val_pretty_printer): Update
1327         comments.  Remove parameter valaddr.  Remove const from
1328         "struct value *".
1329         * extension.h (apply_ext_lang_val_pretty_printer): Update
1330         declaration.
1331         * guile/guile-internal.h (gdbscm_apply_val_pretty_printer):
1332         Update declaration.
1333         * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
1334         Remove parameter valaddr.  Remove const from "struct value *".
1335         * python/py-prettyprint.c (gdbpy_apply_val_pretty_printer):
1336         Likewise.
1337         * python/python-internal.h (gdbpy_apply_val_pretty_printer):
1338         Update declaration.
1339
1340 2016-11-11  Yao Qi  <yao.qi@linaro.org>
1341
1342         * c-lang.h (cp_print_value_fields): Update declaration.
1343         * cp-valprint.c (cp_print_value): Update declaration.
1344         (cp_print_value_fields): Remove parameter valaddr.  Callers
1345         updated.
1346         (cp_print_value): Likewise.
1347
1348 2016-11-09  Tom Tromey  <tom@tromey.com>
1349
1350         * varobj.h (varobj_get_display_hint): Change return type.
1351         * varobj.c (varobj_get_display_hint): Return unique_xmalloc_ptr.
1352         (varobj_value_get_print_value): Update.
1353         * python/python.c (gdbpy_before_prompt_hook, gdbpy_print_stack)
1354         (gdbpy_apply_type_printers): Update.
1355         * python/python-internal.h (unicode_to_target_string)
1356         (python_string_to_target_string, python_string_to_host_string)
1357         (gdbpy_obj_to_string, gdbpy_exception_to_string)
1358         (gdbpy_get_display_hint): Change return types.
1359         * python/py-varobj.c (py_varobj_iter_next): Update.
1360         * python/py-value.c (valpy_getitem, convert_value_from_python):
1361         Update.
1362         * python/py-utils.c (unicode_to_encoded_string)
1363         (unicode_to_target_string, python_string_to_target_string)
1364         (python_string_to_host_string, gdbpy_obj_to_string)
1365         (gdbpy_exception_to_string): Return unique_xmalloc_ptr.
1366         * python/py-unwind.c (pyuw_parse_register_id): Update.
1367         * python/py-type.c (typy_getitem): Update.
1368         * python/py-prettyprint.c (gdbpy_get_display_hint)
1369         (print_stack_unless_memory_error, print_children)
1370         (gdbpy_apply_val_pretty_printer): Update.
1371         * python/py-param.c (set_parameter_value): Update.
1372         (get_doc_string, call_doc_function): Return unique_xmalloc_ptr.
1373         (get_set_value, get_show_value, compute_enum_values, parmpy_init):
1374         Update.
1375         * python/py-infthread.c (thpy_set_name): Update.
1376         * python/py-function.c (fnpy_call, fnpy_init): Update.
1377         * python/py-framefilter.c (extract_sym): Change "name" to
1378         unique_xmalloc_ptr.
1379         (enumerate_args, enumerate_locals): Update.
1380         (py_print_frame): Use unique_xmalloc_ptr.
1381         * python/py-frame.c (frapy_read_var): Update.  Remove cleanup.
1382         * python/py-cmd.c (cmdpy_function, cmdpy_completer, cmdpy_init):
1383         Update.
1384         * python/py-breakpoint.c (bppy_set_condition): Use
1385         unique_xmalloc_ptr.
1386         (bppy_init): Likewise.  Remove cleanup.
1387         (local_setattro): Update.
1388         * mi/mi-cmd-var.c (print_varobj, mi_cmd_var_list_children)
1389         (varobj_update_one): Update.
1390
1391 2016-11-09  Pedro Alves  <palves@redhat.com>
1392
1393         * ax-gdb.c (agent_eval_command_one): Use std::move instead of
1394         gdb::move.
1395         * ax.h (agent_expr_up): Use std::unique_ptr instead of
1396         gdb::unique_ptr.
1397         * breakpoint.c (parse_cond_to_aexpr): Use std::move instead of
1398         gdb::move.
1399         * tracepoint.c (collection_list::collect_symbol): Likewise.
1400         (collection_list::~collection_list): Delete.
1401         (encode_actions_1): Use std::move instead of gdb::move.
1402         (collection_list::add_aexpr): Use std::move instead of
1403         unique_ptr::release.
1404         * tracepoint.h (collection_list) <~collection_list>: Delete
1405         declaration.
1406         <m_aexprs>: Now a vector of agent_ptr_up.
1407
1408 2016-11-09  Pedro Alves  <palves@redhat.com>
1409
1410         * main.c (struct cmdarg): Add constructor.
1411         (captured_main_1): Use vector::emplace_back.
1412         * tracepoint.c (collection_list::add_memrange): Likewise.
1413
1414 2016-11-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1415
1416         * tui/tui-winsource.c (tui_alloc_source_buffer): Remove
1417         failed-xmalloc handling.
1418
1419 2016-11-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1420
1421         * tui/tui-winsource.c (tui_alloc_source_buffer): Subtract
1422         highlight box's overhead when calculating the content height.
1423
1424 2016-11-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1425
1426         * tui/tui-disasm.c (tui_set_disassem_content): Fix calculation of
1427         the longest disassembly line's length.
1428
1429 2016-11-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1430
1431         * tui/tui-disasm.c (tui_set_disassem_content): Fix line buffer
1432         overrun due to unchecked strcpy.
1433
1434 2016-11-09  Tristan Gingold  <gingold@adacore.com>
1435
1436         * darwin-nat.c (find_inferior_task_it): Fix indentation.
1437         (find_inferior_notify_it): Remove.
1438         (find_inferior_pid_it): New function.
1439         (darwin_find_inferior_by_notify): Remove.
1440         (darwin_find_inferior_by_pid): New function.
1441         (darwin_find_new_inferior): New function.
1442         (darwin_check_message_ndr): New function from
1443         darwin_decode_exception_message.
1444         (darwin_decode_exception_message): Call darwin_check_message_ndr.
1445         Handle SIGTRAP addressed to an unknown task (when a task spawned).
1446         (darwin_decode_notify_message): New function.
1447         (darwin_decode_message): Handle unknown task.
1448         (darwin_deallocate_threads): New function from darwin_mourn_inferior.
1449         (darwin_mourn_inferior): Use darwin_deallocate_threads and
1450         darwin_deallocate_exception_ports.
1451         (darwin_deallocate_exception_ports): New function from
1452         darwin_mourn_inferior.
1453         (darwin_setup_exceptions): New function from darwin_attach_pid.
1454         (darwin_setup_request_notification): Likewise.
1455         (darwin_attach_pid): Call darwin_setup_request_notification and
1456         darwin_setup_request_notification.
1457
1458 2016-11-08  Tom Tromey  <tom@tromey.com>
1459
1460         * python/py-framefilter.c (py_print_frame): Use
1461         get_addr_from_python.  Check for errors when getting line number.
1462
1463 2016-11-08  Yao Qi  <yao.qi@linaro.org>
1464
1465         * ada-lang.h (ada_val_print): Remove second parameter.  Remove
1466         const from "struct value *".
1467         * ada-valprint.c (print_field_values): Remove const from
1468         "struct value *".
1469         (val_print_packed_array_elements): Likewise.
1470         (print_variant_part): Likewise.
1471         (ada_val_print_string): Likewise.
1472         (ada_val_print_gnat_array): Likewise.
1473         (ada_val_print_ptr): Likewise.
1474         (ada_val_print_num): Likewise.
1475         (ada_val_print_enum): Likewise.
1476         (ada_val_print_flt): Likewise.
1477         (ada_val_print_union): Likewise.
1478         (ada_val_print_struct_union): Likewise.
1479         (ada_val_print_ref): Likewise.
1480         (ada_val_print_1): Remove second parameter.  Remove const from
1481         "struct value *".
1482         (ada_val_print): Likewise.
1483         * c-lang.h (c_val_print): Likewise.
1484         * c-valprint.c (c_val_print_array): Remove const from
1485         "struct value *".
1486         (c_val_print_ptr): Likewise.
1487         (c_val_print_struct): Likewise.
1488         (c_val_print_union): Likewise.
1489         (c_val_print_int): Likewise.
1490         (c_val_print_memberptr): Likewise.
1491         (c_val_print): Remove second parameter.  Remove const from
1492         "struct value *".  All callers updated.
1493         * cp-valprint.c (cp_print_value): Remove const from
1494         "struct value *".
1495         (cp_print_value_fields): Likewise.
1496         (c_val_print_value): Likewise.
1497         * d-lang.h (d_val_print): Remove second parameter.  Remove const
1498         from "struct value *".
1499         * d-valprint.c (dynamic_array_type): Likewise.
1500         (d_val_print): Likewise.
1501         * f-lang.h (f_val_print): Likewise.
1502         * f-valprint.c (f_val_print): Likewise.
1503         * go-lang.h (go_val_print): Likewise.
1504         * go-valprint.c (print_go_string): Likewise.
1505         (go_val_print): Likewise.
1506         * language.c (unk_lang_val_print): Likewise.
1507         * language.h (struct language_defn) <la_val_print>: Likewise.
1508         Update comments.
1509         (LA_VAL_PRINT): Remove.
1510         * m2-lang.h (m2_val_print): Remove const from
1511         "struct value *".
1512         * m2-valprint.c (m2_print_array_contents): Likewise.
1513         (m2_val_print): Likewise.
1514         * p-lang.h (pascal_val_print): Remove second parameter.  Remove
1515         const from "struct value *".
1516         (pascal_object_print_value_fields): Likewise.
1517         * p-valprint.c (pascal_val_print): Likewise.
1518         (pascal_object_print_value_fields): Likewise.
1519         (pascal_object_print_value): Likewise.
1520         * rust-lang.c (rust_get_disr_info): Likewise.
1521         (val_print_struct): Likewise.
1522         (rust_val_print): Likewise.
1523         * valprint.c (generic_val_print_array): Likewise.
1524         (generic_val_print_ptr): Likewise.
1525         (generic_val_print_memberptr): Likewise.
1526         (generic_val_print_ref): Likewise.
1527         (generic_val_print_enum): Likewise.
1528         (generic_val_print_flags): Likewise.
1529         (generic_val_print_func): Likewise.
1530         (generic_val_print_bool): Likewise.
1531         (generic_val_print_int): Likewise.
1532         (generic_val_print_char): Likewise.
1533         (generic_val_print_float): Likewise.
1534         (generic_val_print_decfloat): Likewise.
1535         (generic_val_print_complex): Likewise.
1536         (generic_val_print): Likewise.
1537         (val_print): Likewise.
1538         (common_val_print): Likewise.
1539         (val_print_type_code_flags): Likewise.
1540         (val_print_scalar_formatted): Likewise.
1541         (val_print_array_elements): Likewise.
1542         * valprint.h (val_print_array_elements): Update declaration.
1543         (val_print_scalar_formatted): Likewise.
1544         (generic_val_print): Likewise.
1545         * value.h (val_print): Likewise.
1546
1547 2016-11-08  Yao Qi  <yao.qi@linaro.org>
1548
1549         * mt-tdep.c (mt_registers_info): Call
1550         get_frame_register_value instead of
1551         deprecated_frame_register_read.
1552         * sh64-tdep.c (sh64_do_register): Likewise.
1553
1554 2016-11-08  Pedro Alves  <palves@redhat.com>
1555
1556         * ax.h (agent_expr_p): Delete.
1557         (DEF_VEC_P (agent_expr_p)): Delete.
1558         * breakpoint.c (build_target_condition_list)
1559         (build_target_command_list): Adjust to use of std::vector.
1560         (bp_location_dtor): Remove now unnecessary VEC_free calls.
1561         * breakpoint.h: Include <vector>.
1562         (struct bp_target_info) <conditions, tcommands>: Now
1563         std::vector's.
1564         * remote.c (remote_add_target_side_condition): bp_tgt->conditions
1565         is now a std::vector; adjust.
1566         (remote_add_target_side_commands, remote_insert_breakpoint):
1567         bp_tgt->tcommands is now a std::vector; adjust.
1568
1569 2016-11-08  Pedro Alves  <palves@redhat.com>
1570
1571         * ax-gdb.c (is_nontrivial_conversion): Use agent_expr_up.
1572         (gen_trace_for_var, gen_trace_for_expr, gen_eval_for_expr)
1573         (gen_trace_for_return_address, gen_printf): Use and return an
1574         agent_expr_up.  Don't use make_cleanup_free_agent_expr.
1575         (agent_eval_command_one, maint_agent_printf_command): Use
1576         agent_expr_up.  Don't use make_cleanup_free_agent_expr.
1577         * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
1578         (gen_trace_for_return_address, gen_eval_for_expr, gen_printf): Use
1579         agent_expr_up.
1580         * ax-general.c (new_agent_expr): Rename to ...
1581         (agent_expr::agent_expr): ... this, and now a constructor.
1582         (free_agent_expr): Rename to ...
1583         (agent_expr::~agent_exp): ... this, and now a destructor.
1584         (do_free_agent_expr_cleanup, make_cleanup_free_agent_expr):
1585         Delete.
1586         * ax.h (struct agent_expr): Add ctor/dtor.
1587         (agent_expr_up): New typedef.
1588         (new_agent_expr, free_agent_expr, make_cleanup_free_agent_expr):
1589         Delete declarations.
1590         * breakpoint.c (parse_cond_to_aexpr): Use and return an
1591         agent_expr_up.  Don't use make_cleanup_free_agent_expr.
1592         (build_target_condition_list): Adjust to use agent_expr_up.
1593         (parse_cmd_to_aexpr): Use and return an agent_expr_up.  Don't use
1594         make_cleanup_free_agent_expr.
1595         (build_target_command_list): Adjust to use agent_expr_up.
1596         (force_breakpoint_reinsertion): Adjust to use agent_expr_up.
1597         (bp_location_dtor): Remove unnecessary free_agent_expr and xfree
1598         calls.
1599         * breakpoint.h (struct bp_target_info) <cond_bytecode,
1600         cmd_bytecode>: Now agent_expr_up's.
1601         * remote.c (remote_download_tracepoint): Adjust to use
1602         agent_expr_up and remove use of make_cleanup_free_agent_expr.
1603         * tracepoint.c (validate_actionline, collect_symbol): Adjust to
1604         use agent_expr_up and remove uses of make_cleanup_free_agent_expr.
1605         (collection_list::~collection_list): Call delete instead of
1606         free_agent_expr.
1607         (encode_actions_1): Adjust to use agent_expr_up and remove uses of
1608         make_cleanup_free_agent_expr.
1609         (add_aexpr): Change parameter type to agent_expr_up; Return a raw
1610         agent_expr pointer.
1611
1612 2016-11-08  Pedro Alves  <palves@redhat.com>
1613
1614         * ada-lang.c (ada_name_for_lookup, type_as_string): Use and return
1615         std::string.
1616         (type_as_string_and_cleanup): Delete.
1617         (ada_lookup_struct_elt_type): Use type_as_string.
1618         * ada-lang.h (ada_name_for_lookup): Now returns std::string.
1619         * ada-varobj.c (ada_varobj_scalar_image): Return a std::string.
1620         (ada_varobj_describe_child): Make 'child_name' and
1621         'child_path_expr' parameters std::string pointers.
1622         (ada_varobj_describe_struct_child, ada_varobj_describe_ptr_child):
1623         Likewise, and use string_printf.
1624         (ada_varobj_describe_simple_array_child)
1625         (ada_varobj_describe_child): Likewise.
1626         (ada_varobj_get_name_of_child, ada_varobj_get_path_expr_of_child)
1627         (ada_varobj_get_value_image)
1628         (ada_varobj_get_value_of_array_variable)
1629         (ada_varobj_get_value_of_variable, ada_name_of_variable)
1630         (ada_name_of_child, ada_path_expr_of_child)
1631         (ada_value_of_variable): Now returns std::string.  Use
1632         string_printf.
1633         (ada_value_of_child): Adjust.
1634         * break-catch-throw.c (check_status_exception_catchpoint): Adjust
1635         to use std::string.
1636         * breakpoint.c (watch_command_1): Adjust to use std::string.
1637         * c-lang.c (c_get_string): Adjust to use std::string.
1638         * c-typeprint.c (print_name_maybe_canonical): Use std::string.
1639         * c-varobj.c (varobj_is_anonymous_child): Use ==/!= std::string
1640         operators.
1641         (c_name_of_variable): Now returns a std::string.
1642         (c_describe_child): The 'cname' and 'cfull_expression' output
1643         parameters are now std::string pointers.  Adjust.
1644         (c_name_of_child, c_path_expr_of_child, c_value_of_variable)
1645         (cplus_number_of_children): Adjust to use std::string and
1646         string_printf.
1647         (cplus_name_of_variable): Now returns a std::string.
1648         (cplus_describe_child): The 'cname' and 'cfull_expression' output
1649         parameters are now std::string pointers.  Adjust.
1650         (cplus_name_of_child, cplus_path_expr_of_child)
1651         (cplus_value_of_variable): Now returns a std::string.
1652         * cp-abi.c (cplus_typename_from_type_info): Return std::string.
1653         * cp-abi.h (cplus_typename_from_type_info): Return std::string.
1654         (struct cp_abi_ops) <get_typename_from_type_info>: Return
1655         std::string.
1656         * cp-support.c (inspect_type): Use std::string.
1657         (cp_canonicalize_string_full, cp_canonicalize_string_no_typedefs)
1658         (cp_canonicalize_string): Return std::string and adjust.
1659         * cp-support.h (cp_canonicalize_string)
1660         (cp_canonicalize_string_no_typedefs, cp_canonicalize_string_full):
1661         Return std::string.
1662         * dbxread.c (read_dbx_symtab): Use std::string.
1663         * dwarf2read.c (dwarf2_canonicalize_name): Adjust to use std::string.
1664         * gdbcmd.h (lookup_struct_elt_type): Adjust to use std::string.
1665         * gnu-v3-abi.c (gnuv3_get_typeid): Use std::string.
1666         (gnuv3_get_typename_from_type_info): Return a std::string and
1667         adjust.
1668         (gnuv3_get_type_from_type_info): Adjust to use std::string.
1669         * guile/guile.c (gdbscm_execute_gdb_command): Adjust to use
1670         std::string.
1671         * infcmd.c (print_return_value_1): Adjust to use std::string.
1672         * linespec.c (find_linespec_symbols): Adjust to
1673         demangle_for_lookup API change.  Use std::string.
1674         * mi/mi-cmd-var.c (print_varobj, mi_cmd_var_set_format)
1675         (mi_cmd_var_info_type, mi_cmd_var_info_path_expression)
1676         (mi_cmd_var_info_expression, mi_cmd_var_evaluate_expression)
1677         (mi_cmd_var_assign, varobj_update_one): Adjust to use std::string.
1678         * minsyms.c (lookup_minimal_symbol): Use std::string.
1679         * python/py-varobj.c (py_varobj_iter_next): Use new instead of
1680         XNEW.  vitem->name is a std::string now, adjust.
1681         * rust-exp.y (convert_ast_to_type, convert_name): Adjust to use
1682         std::string.
1683         * stabsread.c (define_symbol): Adjust to use std::string.
1684         * symtab.c (demangle_for_lookup): Now returns 'const char *'.  Add
1685         a demangle_result_storage parameter.  Use it for storage.
1686         (lookup_symbol_in_language)
1687         (lookup_symbol_in_objfile_from_linkage_name): Adjust to new
1688         demangle_for_lookup API.
1689         * symtab.h (struct demangle_result_storage): New type.
1690         (demangle_for_lookup): Now returns 'const char *'.  Add a
1691         demangle_result_storage parameter.
1692         * typeprint.c (type_to_string): Return std::string and use
1693         ui_file_as_string.
1694         * value.h (type_to_string): Change return type to std::string.
1695         * varobj-iter.h (struct varobj_item) <name>: Now a std::string.
1696         (varobj_iter_delete): Use delete instead of xfree.
1697         * varobj.c (create_child): Return std::string instead of char * in
1698         output parameter.
1699         (name_of_variable, name_of_child, my_value_of_variable): Return
1700         std::string instead of char *.
1701         (varobj_create, varobj_get_handle): Constify 'objname' parameter.
1702         Adjust to std::string fields.
1703         (varobj_get_objname): Return a const char * instead of a char *.
1704         (varobj_get_expression): Return a std::string.
1705         (varobj_list_children): Adjust to use std::string.
1706         (varobj_get_type): Return a std::string.
1707         (varobj_get_path_expr): Return a const char * instead of a char *.
1708         Adjust to std::string fields.
1709         (varobj_get_formatted_value, varobj_get_value): Return a
1710         std::string.
1711         (varobj_set_value): Change type of 'expression' parameter to
1712         std::string.  Use std::string.
1713         (install_new_value): Use std::string.
1714         (delete_variable_1): Adjust to use std::string.
1715         (create_child): Change the 'name' parameter to a std::string
1716         reference.  Swap it into the new item's name.
1717         (create_child_with_value): Swap item's name into the new child's
1718         name.  Use string_printf.
1719         (new_variable): Use new instead of XNEW.
1720         (free_variable): Don't xfree fields that are now std::string.
1721         (name_of_variable, name_of_child): Now returns std::string.
1722         (value_of_root): Adjust to use std::string.
1723         (my_value_of_variable, varobj_value_get_print_value): Return
1724         and use std::string.
1725         (varobj_value_get_print_value): Adjust to use ui_file_as_string
1726         and std::string.
1727         * varobj.h (struct varobj) <name, path_expr, obj_name,
1728         print_value>: Now std::string's.
1729         <name_of_variable, name_of_child, path_expr_of_child,
1730         value_of_variable>: Return std::string.
1731         (varobj_create, varobj_get_handle): Constify 'objname' parameter.
1732         (varobj_get_objname): Return a const char * instead of a char *.
1733         (varobj_get_expression, varobj_get_type): Return a std::string.
1734         (varobj_get_path_expr): Return a const char * instead of a char *.
1735         (varobj_get_formatted_value, varobj_get_value): Return a
1736         std::string.
1737         (varobj_set_value): Constify 'expression' parameter.
1738         (varobj_value_get_print_value): Return a std::string.
1739
1740 2016-11-08  Pedro Alves  <palves@redhat.com>
1741
1742         * language.c (add_language): Use ui_file_as_string and adjust to
1743         use std::string.
1744
1745 2016-11-08  Pedro Alves  <palves@redhat.com>
1746             Tom Tromey  <tom@tromey.com>
1747
1748         * rust-lang.c (struct disr_info) <name>: Now a std::string.
1749         (rust_get_disr_info): Use ui_file_as_string and adjust to use
1750         std::string.
1751         (rust_val_print): Adjust to use std::string.
1752
1753 2016-11-08  Pedro Alves  <palves@redhat.com>
1754
1755         * infrun.c (print_target_wait_results): Use ui_file_as_string and
1756         std::string.
1757
1758 2016-11-08  Pedro Alves  <palves@redhat.com>
1759
1760         * ada-lang.c (type_as_string): Use ui_file_as_string and return
1761         std::string.
1762         (type_as_string_and_cleanup): Delete.
1763         (ada_lookup_struct_elt_type): Use type_as_string.
1764
1765 2016-11-08  Pedro Alves  <palves@redhat.com>
1766
1767         * gdbarch.sh (verify_gdbarch): Use ui_file_as_string and
1768         std::string.
1769         * gdbarch.c: Regenerate.
1770
1771 2016-11-08  Pedro Alves  <palves@redhat.com>
1772
1773         * c-exp.y (OPERATOR NEW): Adjust to use ui_file_as_string and
1774         std::string.
1775
1776 2016-11-08  Pedro Alves  <palves@redhat.com>
1777
1778         * c-lang.h (c_compute_program): Now returns std::string.
1779         * compile/compile-internal.h (class compile_file_names): New
1780         class.
1781         * compile/compile-object-load.c (compile_object_load): Replace
1782         object_file and source_file parameters with a compile_file_names
1783         parameter.  Adjust.
1784         * compile-object-load.h: Include "compile-internal.h".
1785         (compile_object_load): Replace object_file and source_file
1786         parameters with a compile_file_names parameter.
1787         * compile/compile-c-support.c (c_compute_program): Now returns a
1788         std::string.  Use ui_file_as_string.
1789         * compile/compile.c (get_new_file_names): Remove parameters and
1790         return a compile_file_names instead.
1791         (compile_to_object): Now returns a compile_file_names.  Use
1792         ui_file_as_string.
1793         (eval_compile_command): Use compile_file_names.
1794         * language.h (struct language_defn) <la_compute_program>: Now
1795         returns std::string.
1796
1797 2016-11-08  Pedro Alves  <palves@redhat.com>
1798
1799         * cli/cli-setshow.c (do_show_command): Adjust to use
1800         ui_file_as_string and std::string.
1801
1802 2016-11-08  Pedro Alves  <palves@redhat.com>
1803
1804         * remote.c (escape_buffer): Use ui_file_as_string and return
1805         std::string.
1806         (putpkt_binary, read_frame): Adjust to use std::string.
1807
1808 2016-11-08  Pedro Alves  <palves@redhat.com>
1809
1810         * python/py-arch.c (archpy_disassemble): Use ui_file_as_string and
1811         std::string.
1812         * python/py-breakpoint.c (bppy_get_commands): Use
1813         ui_file_as_string and std::string.
1814         * python/py-frame.c (frapy_str): Likewise.
1815         * python/py-type.c (typy_str): Likewise.
1816         * python/py-unwind.c (unwind_infopy_str): Likewise.
1817         * python/py-value.c (valpy_str): Likewise.
1818
1819 2016-11-08  Pedro Alves  <palves@redhat.com>
1820
1821         * printcmd.c (eval_command): Use ui_file_as_string and
1822         std::string.
1823
1824 2016-11-08  Pedro Alves  <palves@redhat.com>
1825
1826         * top.c (quit_confirm): Use ui_file_as_string and std::string.
1827
1828 2016-11-08  Pedro Alves  <palves@redhat.com>
1829
1830         * gdbcmd.h (execute_command_to_string): Now returns std::string.
1831         (lookup_struct_elt_type): Adjust to use std::string.
1832         * top.c (execute_command_to_string): Use ui_file_as_string and
1833         return std::string.
1834         * guile/guile.c (gdbscm_execute_gdb_command): Adjust to use
1835         std::string.
1836         * python/python.c (execute_gdb_command): Adjust to use
1837         std::string.
1838
1839 2016-11-08  Pedro Alves  <palves@redhat.com>
1840
1841         * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
1842         ui_file_as_string and adjust to use std::string.
1843         * guile/scm-disasm.c (gdbscm_arch_disassemble): Likewise.
1844         * guile/scm-frame.c (frscm_print_frame_smob): Likewise.
1845         * guile/scm-type.c (tyscm_type_name): Use ui_file_as_string and
1846         adjust to use std::string.  Throw exception directly instead of
1847         returning it in EXCP output parameter.
1848         (tyscm_print_type_smob, gdbscm_type_print_name): Adjust to
1849         tyscm_type_name interface change.
1850         * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
1851         Use ui_file_as_string and std::string.
1852
1853 2016-11-08  Pedro Alves  <palves@redhat.com>
1854
1855         * arm-tdep.c (_initialize_arm_tdep): Use ui_file_as_string and
1856         std::string.
1857
1858 2016-11-08  Pedro Alves  <palves@redhat.com>
1859
1860         * utils.c (error_stream): Use ui_file_as_string and std::string.
1861
1862 2016-11-08  Pedro Alves  <palves@redhat.com>
1863
1864         * ui-out.c (ui_out_field_stream): Use ui_file_as_string.
1865
1866 2016-11-08  Pedro Alves  <palves@redhat.com>
1867
1868         * ada-valprint.c (ada_print_floating): Use ui_file_as_string and
1869         std::string.
1870
1871 2016-11-08  Pedro Alves  <palves@redhat.com>
1872
1873         * xtensa-tdep.c (xtensa_verify_config): Use ui_file_as_string and
1874         std::string.
1875
1876 2016-11-08  Pedro Alves  <palves@redhat.com>
1877
1878         * dwarf2read.c (dwarf2_compute_name): Use ui_file_as_string and
1879         std::string.
1880
1881 2016-11-08  Pedro Alves  <palves@redhat.com>
1882
1883         * mi/mi-main.c (print_variable_or_computed): Constify 'expression'
1884         parameter.
1885         (mi_cmd_trace_frame_collected): Call encode_actions instead of
1886         encode_actions_and_make_cleanup.  Adjust to use std::vector.
1887         * tracepoint.c (memrange_cmp): Delete.
1888         (memrange_comp): New.
1889         (memrange_sortmerge): Take a memrange vector as parameter instead
1890         of a collection_list.  Use std::sort instead of qsort.
1891         (add_register): Now a method of collection_list.  Adjust to m_
1892         prefix of data fields.
1893         (add_memrange): Now a method of collection_list.  Adjust to m_
1894         prefix of data fields.  Adjust to use std::vector.
1895         (collect_symbol): Now a method of collection_list.  Adjust to m_
1896         prefix of data fields.
1897         (do_collect_symbol): Adjust.  Call add_wholly_collected instead of
1898         accessing the vector directly.
1899         (collection_list::add_wholly_collected): New.
1900         (add_local_symbols): Now a method of collection_list.
1901         (add_static_trace_data): Now a method of collection_list.  Adjust
1902         to use bool.
1903         (clear_collection_list, do_clear_collection_list): Delete.
1904         (init_collection_list): Delete.
1905         (collection_list::collection_list): New.
1906         (collection_list::~collection_list): New.
1907         (stringify_collection_list): Rename to ...
1908         (collection_list::stringify): ... this and adjust to being a
1909         method of collection_list.  Adjust to use of std::vector.
1910         (append_exp): Now a method of collection_list.  Use
1911         ui_file_as_string.  Adjust to std::vector.
1912         (collection_list::finish): New.
1913         (encode_actions_1): Adjust.
1914         (encode_actions_and_make_cleanup): Rename to ...
1915         (encode_actions)... this.  No longer returns a cleanup.  No longer
1916         call init_collection_list nor install do_clear_collection_list
1917         cleanups.  Call collection_list::finish instead of
1918         memrange_sortmerge directly.
1919         (encode_actions_rsp): Adjust to call encode_actions instead of
1920         encode_actions_and_make_cleanup.  Adjust to method renames.
1921         (add_aexpr): Now a method of collection_list.
1922         * tracepoint.h: Include <vector> and <string>.
1923         (struct memrange): Add constructors.
1924         (struct collection_list): Now a class.
1925         (class collection_list) <collection_list, ~collection_list,
1926         add_wholly_collected, append_exp, add_aexpr, add_register,
1927         add_memrange, collect_symbol, add_local_symbols,
1928         add_static_trace_data, finish, stringify, wholly_collected, and
1929         computed>: New methods.
1930         <regs_mask>: Rename to ...
1931         <m_regs_mask>: ... this.
1932         <listsize, next_memrange, list>: Delete fields.
1933         <m_memranges>: New field.
1934         <aexpr_listsize, next_aexpr_elt, aexpr_list>: Delete fields.
1935         <m_aexprs>: New field.
1936         <strace_data>: Rename to ...
1937         <m_strace_data>: ... this.  Now a bool.
1938         <wholly_collected>: Rename to ...
1939         <m_wholly_collected>: ... this.  Now a std::vector<std::string>.
1940         <computed>: Rename to ...
1941         <m_computed>: ... this.  Now a std::vector<std::string>.
1942         (encode_actions_and_make_cleanup): Delete declaration.
1943         (encode_actions): New declaration.
1944
1945 2016-11-08  Pedro Alves  <palves@redhat.com>
1946
1947         * ui-file.c (do_ui_file_as_string, ui_file_as_string): New
1948         functions.
1949         * ui-file.h: Include <string>.
1950         (ui_file_as_string): New declaration.
1951
1952 2016-11-08  Pedro Alves  <palves@redhat.com>
1953
1954         * ada-lang.c (ada_read_renaming_var_value): Use expression_up.
1955         (struct ada_catchpoint_location) <excep_cond_expr>: Now an
1956         expression_up.
1957         (ada_catchpoint_location_dtor): Reset excep_cond_expr instead of
1958         using xfree.
1959         (create_excep_cond_exprs): Use expression_up and gdb::move.
1960         (allocate_location_exception): Use new instead of XNEW.
1961         (should_stop_exception): Likewise.  Adjust to use expression_up.
1962         (create_ada_exception_catchpoint): Use new instead of XNEW.
1963         * ax-gdb.c (agent_eval_command_one): Use expression_up instead of
1964         cleanups.
1965         (maint_agent_printf_command): Use expression_up.
1966         * break-catch-sig.c (create_signal_catchpoint): Use new instead of
1967         XNEW.
1968         * break-catch-syscall.c (create_syscall_event_catchpoint):
1969         Likewise.
1970         * break-catch-throw.c (handle_gnu_v3_exceptions): Use new instead
1971         of XCNEW.  Use gdb::unique_ptr instead of cleanups.
1972         * breakpoint.c (set_breakpoint_condition, update_watchpoint)
1973         (parse_cmd_to_aexpr, watchpoint_check)
1974         (bpstat_check_breakpoint_conditions, watchpoint_locations_match):
1975         Adjust to use expression_up.
1976         (init_bp_location): Adjust.
1977         (free_bp_location): Use delete instead of xfree.
1978         (set_raw_breakpoint_without_location, set_raw_breakpoint)
1979         (add_solib_catchpoint, create_fork_vfork_event_catchpoint)
1980         (new_single_step_breakpoint, create_breakpoint_sal): Use new
1981         instead of XNEW.
1982         (find_condition_and_thread): Adjust to use expression_up.
1983         (create_breakpoint): Use new instead of XNEW.
1984         (dtor_watchpoint): Don't xfree expression pointers, they're
1985         unique_ptr's now.
1986         (insert_watchpoint, remove_watchpoint): Adjust.
1987         (watch_command_1): Use expression_up.  Use new instead of XCNEW.
1988         (catch_exec_command_1): Use new instead of XNEW.
1989         (bp_location_dtor): Don't xfree expression pointers, they're
1990         unique_ptr's now.
1991         (base_breakpoint_allocate_location)
1992         (strace_marker_create_breakpoints_sal): Use new instead of XNEW.
1993         (delete_breakpoint): Use delete instead of xfree.
1994         * breakpoint.h (struct bp_location) <cond>: Now an
1995         unique_ptr<expression> instead of a raw pointer.
1996         (struct watchpoint) <exp, cond_exp>: Likewise.
1997         * cli/cli-script.c (execute_control_command): Use expression_up
1998         instead of cleanups.
1999         * dtrace-probe.c (dtrace_process_dof_probe): Use expression_up.
2000         * eval.c (parse_and_eval_address, parse_and_eval_long)
2001         (parse_and_eval, parse_to_comma_and_eval, parse_and_eval_type):
2002         Use expression_up instead of cleanups.
2003         * expression.h (expression_up): New typedef.
2004         (parse_expression, parse_expression_with_language, parse_exp_1):
2005         Change return type to expression_up.
2006         * mi/mi-main.c (mi_cmd_data_evaluate_expression)
2007         (print_variable_or_computed): Use expression_up.
2008         * objc-lang.c (print_object_command): Use expression_up instead of
2009         cleanups.
2010         * parse.c (parse_exp_1, parse_exp_in_context)
2011         (parse_exp_in_context_1, parse_expression)
2012         (parse_expression_with_language): Return an expression_up instead
2013         of a raw pointer.
2014         (parse_expression_for_completion): Use expression_up.
2015         * printcmd.c (struct display) <exp>: Now an expression_up instead
2016         of a raw pointer.
2017         (print_command_1, output_command_const, set_command, x_command):
2018         Use expression_up instead of cleanups.
2019         (display_command): Likewise.  Use new instead of XNEW.
2020         (free_display): Use delete instead of xfree.
2021         (do_one_display): Adjust to use expression_up.
2022         * remote.c (remote_download_tracepoint): Likewise.
2023         * stack.c (return_command): Likewise.
2024         * tracepoint.c (validate_actionline, encode_actions_1): Use
2025         expression_up instead of cleanups.
2026         * typeprint.c (whatis_exp, maintenance_print_type): Likewise.
2027         * value.c (init_if_undefined_command): Likewise.
2028         * varobj.c (struct varobj_root) <exp>: Now an expression_up
2029         instead of a raw pointer.
2030         (varobj_create): Adjust.
2031         (varobj_set_value): Use an expression_up instead of cleanups.
2032         (new_root_variable): Use new instead of XNEW.
2033         (free_variable): Use delete instead of xfree.
2034         (value_of_root_1): Use std::swap.
2035
2036 2016-11-08  Pedro Alves  <palves@redhat.com>
2037
2038         * cli/cli-script.c (execute_control_command): Use std::string
2039         instead of cleanups.
2040         (locate_arg): Constify return type.
2041         (insert_args): Constify paremeter.  Simplify using std::string.
2042         Return a std::string.
2043
2044 2016-11-08  Pedro Alves  <palves@redhat.com>
2045
2046         * breakpoint.c (struct commands_info) <arg>: Constify.
2047         (commands_command_1): Constify 'arg' parameter.  Use std::string
2048         and string_printf.
2049         (commands_from_control_command): Constify 'arg' parameter.
2050         (map_breakpoint_numbers): Constify 'args' parameter.
2051         * breakpoint.h (commands_from_control_command): Constify 'arg'
2052         parameter.
2053
2054 2016-11-08  Pedro Alves  <palves@redhat.com>
2055
2056         * cli/cli-script.c (execute_control_command): Assume insert_args
2057         never returns NULL.
2058         (insert_args): Assume xmalloc never returns NULL.
2059
2060 2016-11-08  Pedro Alves  <palves@redhat.com>
2061
2062         * Makefile.in (COMMON_OBS): Add utils-selftests.o.
2063         * common/common-utils.c (string_printf): New function.
2064         * common/common-utils.h: Include <string>.
2065         (string_printf): Declare.
2066         * utils-selftests.c: New file.
2067
2068 2016-11-08  Yao Qi  <yao.qi@linaro.org>
2069
2070         * aarch64-tdep.c (aarch64_software_single_step): Return
2071         VEC (CORE_ADDR) *.  Return NULL instead of 0.  Don't call
2072         insert_single_step_breakpoint.
2073         * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise.
2074         (alpha_software_single_step): Likewise.
2075         * alpha-tdep.h (alpha_software_single_step): Update declaration.
2076         * arm-linux-tdep.c (arm_linux_software_single_step): Return
2077         VEC (CORE_ADDR) *.  Return NULL instead of 0.
2078         * arm-tdep.c (arm_software_single_step): Return NULL instead of 0.
2079         * arm-tdep.h (arm_software_single_step): Update declaration.
2080         * breakpoint.c (insert_single_step_breakpoints): New function.
2081         * breakpoint.h (insert_single_step_breakpoints): Declare.
2082         * cris-tdep.c (cris_software_single_step): Return
2083         VEC (CORE_ADDR) *.  Don't call insert_single_step_breakpoint.
2084         * gdbarch.sh (software_single_step): Change it to return
2085         VEC (CORE_ADDR) *.
2086         * gdbarch.c, gdbarch.h: Regenerated.
2087         * infrun.c (maybe_software_singlestep): Adjust.
2088         * mips-tdep.c (mips_deal_with_atomic_sequence): Return
2089         VEC (CORE_ADDR) *.  Don't call insert_single_step_breakpoint.
2090         (micromips_deal_with_atomic_sequence): Likewise.
2091         (deal_with_atomic_sequence): Likewise.
2092         (mips_software_single_step): Likewise.
2093         * mips-tdep.h (mips_software_single_step): Update declaration.
2094         * moxie-tdep.c (moxie_software_single_step): Likewise.
2095         * nios2-tdep.c (nios2_software_single_step): Likewise.
2096         * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update
2097         declaration.
2098         * record-full.c (record_full_resume): Adjust.
2099         (record_full_wait_1): Likewise.
2100         * rs6000-aix-tdep.c (rs6000_software_single_step): Return
2101         VEC (CORE_ADDR) *.  Don't call insert_single_step_breakpoint.
2102         * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Return
2103         VEC (CORE_ADDR) *.  Don't call insert_single_step_breakpoint.
2104         * s390-linux-tdep.c (s390_software_single_step): Likewise.
2105         * sparc-tdep.c (sparc_software_single_step): Likewise.
2106         * spu-tdep.c (spu_software_single_step): Likewise.
2107         * tic6x-tdep.c (tic6x_software_single_step): Likewise.
2108
2109 2016-11-08  Yao Qi  <yao.qi@linaro.org>
2110
2111         * arm-linux-tdep.c (arm_linux_software_single_step): Write
2112         adjusted address back to vector.  Call insert_single_step_breakpoint
2113         in a new loop.
2114         * arm-tdep.c (arm_software_single_step): Likewise.
2115
2116 2016-11-08  Yao Qi  <yao.qi@linaro.org>
2117
2118         * arm-linux-tdep.c (arm_linux_software_single_step): Don't
2119         call arm_insert_single_step_breakpoint, call
2120         insert_single_step_breakpoint instead.
2121         * arm-tdep.c (arm_insert_single_step_breakpoint): Remove.
2122         (arm_software_single_step): Don't call
2123         arm_insert_single_step_breakpoint, call
2124         insert_single_step_breakpoint instead.
2125         * arm-tdep.h (arm_insert_single_step_breakpoint): Remove
2126         declaration.
2127
2128 2016-11-08  Cordian A. Daniluk  <th3c0r1uk@gmail.com>
2129
2130         PR breakpoints/20739
2131         * breakpoint.c (check_fast_tracepoint_sals): Don't print duplicate
2132         0x prefix.
2133
2134 2016-11-08  Yao Qi  <yao.qi@linaro.org>
2135
2136         * rust-lang.c (val_print_struct): Fix indentation.
2137
2138 2016-11-08  Lionel Flandrin  <lionel@svkt.org>
2139
2140         * remote.c (process_g_packet): Detect truncated registers in 'g'
2141         packets and raise an error.
2142
2143 2016-11-07  Doug Evans  <dje@google.com>
2144
2145         * guile/scm-value.c (gdbscm_value_field): Fix call to value_struct_elt.
2146         * python/py-value.c (valpy_getitem): Ditto.
2147
2148 2016-11-07  Doug Evans  <dje@google.com>
2149
2150         * i386-tdep.c (i386_gdbarch_init): Add comments.
2151
2152 2016-11-07  Doug Evans  <dje@google.com>
2153
2154         * python/py-unwind.c (unwind_infopy_str): Fix use of VEC_iterate.
2155
2156 2016-11-07  Doug Evans  <dje@google.com>
2157
2158         * configure.tgt (x86_64-*-elf*): Remove i386bsd-tdep.o.
2159
2160 2016-11-04  Simon Marchi  <simon.marchi@polymtl.ca>
2161
2162         * maint.c (scoped_command_stats::scoped_command_stats): Fix typo.
2163         * ppcnbsd-tdep.c (_initialize_ppcnbsd_tdep): Likewise.
2164         * ppcobsd-tdep.c (_initialize_ppcobsd_tdep): Likewise.
2165         * ui-out.c (ui_out_new): Likewise.
2166         * utils.c (init_page_info): Likewise.
2167         (reset_prompt_for_continue_wait_time): Likewise.
2168         * windows-nat.c (windows_init_thread_list): Likewise.
2169         * xtensa-tdep.c (call0_analyze_prologue): Likewise.
2170
2171 2016-10-29  Manish Goregaokar  <manish@mozilla.com>
2172
2173         * rust-exp.y: Parse `sizeof(exp)` as `UNOP_SIZEOF`.
2174
2175 2016-10-28  Manish Goregaokar  <manish@mozilla.com>
2176
2177         * rust-lang.c (rust_union_is_untagged): Add function to check if a
2178         union is an untagged union.
2179         (rust_val_print): Handle printing of untagged union values.
2180         (rust_print_type): Handle printing of untagged union types.
2181         (rust_evaluate_subexp): Handle evaluating field access on untagged
2182         unions.
2183
2184 2016-10-27  Manish Goregaokar  <manish@mozilla.com>
2185
2186         * rust-lang.c (rust_get_disr_info): Treat univariant enums without
2187         discriminants as encoded enums with a real field.
2188         * rust-lang.c (rust_evaluate_subexp): Handle field access on
2189         encoded struct-like enums.
2190
2191 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2192
2193         * Makefile.in (.y.c): Replace YY_NULL with YY_NULLPTR.
2194
2195 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2196             Pedro Alves <palves@redhat.com>
2197
2198         * aarch64-tdep.c (aarch64_default_breakpoint): Change it to
2199         constexpr.  Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2200         (aarch64_gdbarch_init): Don't use
2201         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2202         * alpha-tdep.c (break_insn): Rename to alpha_break_insn.
2203         Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2204         (alpha_gdbarch_init): Don't use
2205         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2206         * arc-tdep.c (arc_gdbarch_init): Don't use
2207         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2208         * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Remove.
2209         (struct bp_manipulation): New.
2210         (SET_GDBARCH_BREAKPOINT_MANIPULATION): Remove.
2211         (struct bp_manipulation_endian): New.
2212         (BP_MANIPULATION): New.
2213         (BP_MANIPULATION_ENDIAN): New.
2214         * arm-tdep.c (arm_gdbarch_init): Don't use
2215         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2216         * avr-tdep.c (avr_break_insn): Change it constexpr.
2217         (avr_gdbarch_init): Don't use
2218         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2219         * bfin-tdep.c (bfin_gdbarch_init): Likewise.
2220         * cris-tdep.c (cris_gdbarch_init): Likewise.
2221         * frv-tdep.c (breakpoint): Rename it to frv_break_insn, and
2222         change its type to constexpr.  Don't use
2223         GDBARCH_BREAKPOINT_MANIPULATION.
2224         (frv_gdbarch_init): Don't use
2225         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2226         * ft32-tdep.c (breakpoint): Rename it to ft32_break_insn and
2227         change its type to constexpr.  Don't use
2228         GDBARCH_BREAKPOINT_MANIPULATION.
2229         (ft32_gdbarch_init): Don't use
2230         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2231         * h8300-tdep.c (breakpoint): Rename it to h8300_break_insn.
2232         Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2233         (h8300_gdbarch_init): Don't use
2234         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2235         * hppa-tdep.c (breakpoint): Rename it to h8300_break_insn.
2236         Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2237         (hppa_gdbarch_init): Don't use
2238         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2239         * i386-tdep.c (break_insn): Rename it to i386_break_insn.
2240         Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2241         (i386_gdbarch_init): Don't use
2242         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2243         * iq2000-tdep.c (iq2000_gdbarch_init): Don't use
2244         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2245         * lm32-tdep.c (breakpoint): Rename it to lm32_break_insn and
2246         change its type to constexpr.  Don't use
2247         GDBARCH_BREAKPOINT_MANIPULATION.
2248         (lm32_gdbarch_init): Don't use
2249         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2250         * m32c-tdep.c (break_insn): Rename it to m32c_break_insn and change
2251         its type to constexpr.  Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2252         (m32c_gdbarch_init): Don't use
2253         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2254         * m32r-tdep.c (m32r_gdbarch_init): Likewise.
2255         * m68hc11-tdep.c (breakpoint): Rename it to m68hc11_break_insn and
2256         change its type to constexpr.
2257         Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2258         (m68hc11_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION.
2259         * m68k-tdep.c (break_insn): Rename it to m68k_break_insn and change
2260         its type to constexpr.  Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2261         (m68k_gdbarch_init):  Don't use
2262         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2263         * m88k-tdep.c (break_insn): Rename it to m88k_break_insn and change
2264         its type to constexpr.  Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2265         (m88k_gdbarch_init): Don't use
2266         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2267         * mep-tdep.c (breakpoint): Rename it to mep_break_insn and change
2268         its type to constexpr.  Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2269         (mep_gdbarch_init): Don't use
2270         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2271         * microblaze-tdep.c (break_insn): Rename it to
2272         microblaze_break_insn and change its type to constexpr.  Don't use
2273         GDBARCH_BREAKPOINT_MANIPULATION.
2274         (microblaze_gdbarch_init): Don't use
2275         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2276         * mips-tdep.c (mips_gdbarch_init): Likewise.
2277         * mn10300-tdep.c (breakpoint): Rename it to mn10300_break_insn and
2278         change its type to constexpr.  Don't use
2279         GDBARCH_BREAKPOINT_MANIPULATION.
2280         (mn10300_gdbarch_init): Don't use
2281         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2282         * moxie-tdep.c (breakpoint): Rename it to moxie_break_insn and
2283         change its type to constexpr.  Don't use
2284         GDBARCH_BREAKPOINT_MANIPULATION.
2285         (moxie_gdbarch_init): Don't use
2286         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2287         * msp430-tdep.c (breakpoint): Rename it to msp430_break_insn
2288         and change its type to constexpr.  Don't use
2289         GDBARCH_BREAKPOINT_MANIPULATION.
2290         (msp430_gdbarch_init): Don't use
2291         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2292         * mt-tdep.c (mt_gdbarch_init): Likewise.
2293         * nds32-tdep.c (break_insn): Rename it to nds32_break_insn
2294         and change its type to constexpr.  Don't use
2295         GDBARCH_BREAKPOINT_MANIPULATION.
2296         (nds32_gdbarch_init): Don't use
2297         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2298         * nios2-tdep.c (nios2_gdbarch_init): Likewise.
2299         * rl78-tdep.c (breakpoint): Rename it to rl78_break_ins
2300         and change its type to rl78_break_insn.  Don't use
2301         GDBARCH_BREAKPOINT_MANIPULATION.
2302         (rl78_gdbarch_init): Don't use
2303         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2304         * rs6000-tdep.c (big_breakpoint): Change its type to
2305         constexpr.
2306         (little_breakpoint): Likewise.
2307         Don't use GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN.
2308         (rs6000_gdbarch_init): Don't use
2309         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2310         * rx-tdep.c (breakpoint): Rename it to rx_break_insn and
2311         change its type to constexpr.  Don't use
2312         GDBARCH_BREAKPOINT_MANIPULATION.
2313         (rx_gdbarch_init): Don't use
2314         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2315         * s390-linux-tdep.c (breakpoint): Rename it to s390_break_insn
2316         and change its type to constexpr.  Don't use
2317         GDBARCH_BREAKPOINT_MANIPULATION
2318         (s390_gdbarch_init): Don't use
2319         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2320         * score-tdep.c (score_gdbarch_init): Likewise.
2321         * sh-tdep.c (sh_gdbarch_init): Likewise.
2322         * sh64-tdep.c (sh64_gdbarch_init): Likewise.
2323         * sparc-tdep.c (break_insn): Rename it to sparc_break_insn
2324         and change its type to constexpr.  Don't use
2325         GDBARCH_BREAKPOINT_MANIPULATION.
2326         (sparc32_gdbarch_init): Don't use
2327         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2328         * spu-tdep.c (breakpoint): Rename it to spu_break_insn and change
2329         its type to constexpr.  Don't use
2330         GDBARCH_BREAKPOINT_MANIPULATION.
2331         (spu_gdbarch_init): Don't use
2332         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2333         * tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
2334         * tilegx-tdep.c (breakpoint): Rename it to tilegx_break_insn
2335         and change its type to constexpr.  Don't use
2336         GDBARCH_BREAKPOINT_MANIPULATION.
2337         (tilegx_gdbarch_init): Don't use
2338         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2339         * v850-tdep.c (v850_gdbarch_init): Likewise.
2340         * vax-tdep.c (break_insn): Rename it to vax_break_insn and
2341         change its type to constexpr.
2342         Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2343         (vax_gdbarch_init): Don't use
2344         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2345         * xstormy16-tdep.c (breakpoint): Rename it to
2346         xstormy16_break_insn and change its type to constexpr.
2347         Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2348         (xstormy16_gdbarch_init): Don't use
2349         SET_GDBARCH_BREAKPOINT_MANIPULATION.
2350         * xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
2351
2352 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2353
2354         * arm-tdep.c (arm_override_mode): Remove.
2355         (arm_pc_is_thumb): Update.
2356         (arm_insert_single_step_breakpoint): Update.
2357
2358 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2359
2360         * arch-utils.c (default_breakpoint_kind_from_current_state):
2361         New function.
2362         * arch-utils.h (default_breakpoint_kind_from_current_state):
2363         Declare.
2364         * arm-tdep.c (arm_breakpoint_kind_from_current_state): New
2365         function.
2366         (arm_gdbarch_init): Call
2367         set_gdbarch_breakpoint_kind_from_current_state.
2368         * breakpoint.c (breakpoint_kind): Call
2369         gdbarch_breakpoint_kind_from_current_state for single step
2370         breakpoint.  Update comments.
2371         * gdbarch.sh (breakpoint_kind_from_current_state): New.
2372         * gdbarch.c, gdbarch.h: Regenerate.
2373
2374 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2375
2376         * arch-utils.c (default_breakpoint_from_pc): New function.
2377         * arch-utils.h (GDBARCH_BREAKPOINT_FROM_PC): Remove.
2378         (GDBARCH_BREAKPOINT_MANIPULATION): Don't use
2379         GDBARCH_BREAKPOINT_FROM_PC.
2380         (SET_GDBARCH_BREAKPOINT_MANIPULATION): Don't call
2381         set_gdbarch_breakpoint_from_pc.
2382         (default_breakpoint_from_pc): Remove declaration.
2383         * gdbarch.sh (breakpoint_from_pc): Add its default implementation.
2384         * gdbarch.c, gdbarch.h: Regenerate.
2385         * arm-tdep.c: Don't use GDBARCH_BREAKPOINT_FROM_PC.
2386         * arc-tdep.c, bfin-tdep.c, cris-tdep.c, iq2000-tdep.c: Likewise.
2387         * m32r-tdep.c, mips-tdep.c, mt-tdep.c: Likewise.
2388         * nios2-tdep.c, score-tdep.c, sh-tdep.c: Likewise.
2389         * sh64-tdep.c, tic6x-tdep.c, v850-tdep.c, xtensa-tdep.c: Likewise.
2390
2391 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2392
2393         * arch-utils.c (default_remote_breakpoint_from_pc): Remove.
2394         * arch-utils.h (default_remote_breakpoint_from_pc): Remove.
2395         * arm-tdep.c (arm_remote_breakpoint_from_pc): Remove.
2396         (arm_gdbarch_init): Don't call
2397         set_gdbarch_remote_breakpoint_from_pc.
2398         * gdbarch.sh (remote_breakpoint_from_pc): Remove.
2399         * gdbarch.c, gdbarch.h: Regenerate.
2400         * mips-tdep.c (mips_remote_breakpoint_from_pc): Remove.
2401         (mips_gdbarch_init): Don't call
2402         set_gdbarch_remote_breakpoint_from_pc.
2403
2404 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2405
2406         * breakpoint.h (struct bp_target_info) <placed_size>: Remove.
2407         <kind>: New field.
2408         Update all users.
2409
2410 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2411
2412         * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define
2413         breakpoint_kind_from_pc and sw_breakpoint_from_kind.
2414         (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise.
2415         (SET_GDBARCH_BREAKPOINT_MANIPULATION): Call
2416         set_gdbarch_breakpoint_kind_from_pc and
2417         set_gdbarch_sw_breakpoint_from_kind.
2418         * arm-tdep.c: Add comments.
2419         * bfin-tdep.c: Likewise.
2420         * breakpoint.c (breakpoint_kind): New function.
2421         (insert_bp_location): Set target_info.placed_size and
2422         target_info.placed_address.
2423         (bkpt_insert_location): Likewise.
2424         * cris-tdep.c: Add comments.
2425         * gdbarch.sh (breakpoint_kind_from_pc): New.
2426         (sw_breakpoint_from_kind): New.
2427         * gdbarch.c, gdbarch.h: Regenerated.
2428         * ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set
2429         bp_tgt->placed_size.
2430         (ia64_memory_remove_breakpoint): Don't assert
2431         bp_tgt->placed_size.
2432         (ia64_breakpoint_kind_from_pc): New function.
2433         (ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc.
2434         * m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set
2435         bp_tgt->placed_size.
2436         * mem-break.c (default_memory_insert_breakpoint): Don't set
2437         bp_tgt->placed_size.  Call gdbarch_sw_breakpoint_from_kind.
2438         (default_memory_remove_breakpoint): Call
2439         gdbarch_sw_breakpoint_from_kind.
2440         (memory_validate_breakpoint): Don't check bp_tgt->placed_size.
2441         * mips-tdep.c: Add comments.
2442         * mt-tdep.c: Likewise.
2443         * nios2-tdep.c: Likewise.
2444         * record-full.c (record_full_insert_breakpoint): Don't call
2445         gdbarch_breakpoint_from_pc.  Don't set bp_tgt->placed_address
2446         and bp_tgt->placed_size.
2447         * remote.c (remote_insert_breakpoint): Don't call
2448         gdbarch_remote_breakpoint_from_pc.  Use bp_tgt->placed_size.
2449         Don't set bp_tgt->placed_address and bp_tgt->placed_size.
2450         (remote_insert_hw_breakpoint): Likewise.
2451         * score-tdep.c: Likewise.
2452         * sh-tdep.c: Likewise.
2453         * tic6x-tdep.c: Likewise.
2454         * v850-tdep.c: Likewise.
2455         * xtensa-tdep.c: Likewise.
2456
2457 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2458
2459         * arch-utils.h (GDBARCH_BREAKPOINT_FROM_PC): New macro.
2460         (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): New macro.
2461         * arm-tdep.c (arm_breakpoint_from_pc): Remove.
2462         (arm_breakpoint_kind_from_pc): New function.
2463         (arm_sw_breakpoint_from_kind): New function.
2464         (arm_breakpoint_from_pc): Call arm_breakpoint_kind_from_pc
2465         and arm_sw_breakpoint_from_kind.
2466         Use GDBARCH_BREAKPOINT_FROM_PC.
2467         (arm_remote_breakpoint_from_pc): Call
2468         arm_breakpoint_kind_from_pc.
2469         (arm_gdbarch_init): Replace set_gdbarch_breakpoint_from_pc
2470         with SET_GDBARCH_BREAKPOINT_MANIPULATION.
2471         * arc-tdep.c: Likewise.
2472         * bfin-tdep.c: Likewise.
2473         * cris-tdep.c: Likewise.
2474         * iq2000-tdep.c: Likewise.
2475         * m32r-tdep.c: Likewise.
2476         * mips-tdep.c: Likewise.
2477         * mt-tdep.c: Likewise.
2478         * nios2-tdep.c: Likewise.
2479         * rs6000-tdep.c: Likewise.
2480         * score-tdep.c: Likewise.
2481         * sh-tdep.c: Likewise.
2482         * sh64-tdep.c: Likewise.
2483         * tic6x-tdep.c: Likewise.
2484         * v850-tdep.c: Likewise.
2485         * xtensa-tdep.c: Likewise.
2486
2487 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2488
2489         * mips-tdep.c (mips_breakpoint_kind): New enum.
2490         (mips_breakpoint_from_pc): Use it.
2491         (mips_remote_breakpoint_from_pc): Likewise.
2492
2493 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2494
2495         * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): New macro.
2496         (SET_GDBARCH_BREAKPOINT_MANIPULATION): New macro.
2497         aarch64-tdep.c (aarch64_breakpoint_from_pc): Remove.  Use
2498         GDBARCH_BREAKPOINT_MANIPULATION.
2499         (aarch64_gdbarch_init): Replace set_gdbarch_breakpoint_from_pc
2500         with SET_GDBARCH_BREAKPOINT_MANIPULATION.
2501         * alpha-tdep.c: Likewise.
2502         * avr-tdep.c: Likewise.
2503         * frv-tdep.c: Likewise.
2504         * ft32-tdep.c: Likewise.
2505         * h8300-tdep.c: Likewise.
2506         * hppa-tdep.c: Likewise.
2507         * i386-tdep.c: Likewise.
2508         * lm32-tdep.c: Likewise.
2509         * m32c-tdep.c: Likewise.
2510         * m68hc11-tdep.c: Likewise.
2511         * m68k-tdep.c: Likewise.
2512         * m88k-tdep.c: Likewise.
2513         * mep-tdep.c: Likewise.
2514         * microblaze-tdep.c: Likewise.
2515         * mn10300-tdep.c: Likewise.
2516         * moxie-tdep.c: Likewise.
2517         * msp430-tdep.c: Likewise.
2518         * rl78-tdep.c: Likewise.
2519         * rx-tdep.c: Likewise.
2520         * s390-linux-tdep.c: Likewise.
2521         * sparc-tdep.c: Likewise.
2522         * spu-tdep.c: Likewise.
2523         * tilegx-tdep.c: Likewise.
2524         * vax-tdep.c: Likewise.
2525         * xstormy16-tdep.c: Likewise.
2526
2527 2016-11-03  Yao Qi  <yao.qi@linaro.org>
2528
2529         * mem-break.c (default_memory_insert_breakpoint): Don't check
2530         'bp' against NULL.
2531         * microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint):
2532         Likewise.
2533         * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
2534
2535 2016-11-02  Tom Tromey  <tom@tromey.com>
2536
2537         * dwarf2loc.c (dwarf_evaluate_loc_desc::get_base_type): Rename
2538         from impl_get_base_type.  Rewrite.
2539         (struct dwarf_expr_baton): Remove.
2540         (dwarf_evaluate_loc_desc::push_dwarf_reg_entry_value): Save and
2541         restore more fields.
2542         (symbol_needs_eval_context::get_frame_pc): New method.
2543         * dwarf2expr.h (dwarf_expr_context::get_base_type): Now public,
2544         virtual.
2545         (dwarf_expr_context::impl_get_base_type): Remove.
2546         * dwarf2expr.c (dwarf_expr_context::get_base_type): Remove.
2547
2548 2016-10-31  Maciej W. Rozycki  <macro@imgtec.com>
2549
2550         * configure.ac <mips-sgi-irix5*>: Remove <sys/proc.h> _KMEMUSER
2551         workaround.
2552         * configure: Regenerate.
2553         * config.in: Regenerate.
2554
2555 2016-10-31  Maciej W. Rozycki  <macro@imgtec.com>
2556
2557         * mips-tdep.c (mips_r3041_reg_names): Remove.
2558         (mips_breakpoint_from_pc): Remove IDT and PMON breakpoint
2559         encodings.
2560
2561 2016-10-31  Maciej W. Rozycki  <macro@imgtec.com>
2562
2563         * defs.h (gdb_osabi): Remove GDB_OSABI_IRIX enum value.
2564         * osabi.c (gdb_osabi_names): Remove "Irix" entry.
2565         * mips-tdep.c (mips_irix_reg_names): Remove.
2566         (mips_register_type): Remove GDB_OSABI_IRIX code.
2567         (mips_pseudo_register_type): Likewise.
2568         (mips_breakpoint_from_pc): Likewise.
2569         (mips_gdbarch_init): Likewise.
2570
2571 2016-10-29  Pedro Alves  <palves@redhat.com>
2572
2573         * NEWS: Clarify C++ requirement.
2574
2575 2016-10-29  Pedro Alves  <palves@redhat.com>
2576
2577         * NEWS: Adjust to mention C++11 requirement.
2578
2579 2016-10-29  Eli Zaretskii  <eliz@gnu.org>
2580
2581         * NEWS: Mention support for redirection on MS-Windows.
2582
2583         * windows-nat.c (redir_open, redir_set_redirection)
2584         (redirect_inferior_handles) [!__CYGWIN__]: New functions.
2585         (windows_create_inferior) [!__CYGWIN__]: Use
2586         'redirect_inferior_handles' to redirect standard handles of the
2587         debuggee if the command line requests that.
2588
2589 2016-10-28  Pedro Alves  <palves@redhat.com>
2590
2591         * Makefile.in (CXX_DIALECT): Get from configure.
2592         (COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
2593         (FLAGS_TO_PASS): Pass CXX_DIALECT.
2594         * acinclude.m4: Include ax_cxx_compile_stdcxx.m4.
2595         * ax_cxx_compile_stdcxx.m4: Add FSF copyright header.  Set and
2596         AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP.
2597         * configure.ac: Call AX_CXX_COMPILE_STDCXX.
2598         * config.in: Regenerate.
2599         * configure: Regenerate.
2600
2601 2016-10-28  Pedro Alves  <palves@redhat.com>
2602
2603         * ax_cxx_compile_stdcxx.m4: New file.
2604
2605 2016-10-28  Pedro Alves  <palves@redhat.com>
2606
2607         * maint.c (scoped_command_stats::scoped_command_stats): Clear
2608         m_space_enabled, m_time_enabled and m_symtab_enabled.
2609
2610 2016-10-28  Markus Metzger  <markus.t.metzger@intel.com>
2611
2612         * btrace.c (bfun_s): New typedef.
2613         (ftrace_update_caller): Print caller in debug dump.
2614         (ftrace_get_caller, ftrace_match_backtrace, ftrace_fixup_level)
2615         (ftrace_compute_global_level_offset, ftrace_connect_bfun)
2616         (ftrace_connect_backtrace, ftrace_bridge_gap, btrace_bridge_gaps): New.
2617         (btrace_compute_ftrace_bts): Pass vector of gaps.  Collect gaps.
2618         (btrace_compute_ftrace_pt): Likewise.
2619         (btrace_compute_ftrace): Split into this, ...
2620         (btrace_compute_ftrace_1): ... this, and ...
2621         (btrace_finalize_ftrace): ... this.  Call btrace_bridge_gaps.
2622
2623 2016-10-28  Markus Metzger  <markus.t.metzger@intel.com>
2624
2625         * btrace.c (ftrace_new_return): Start from the previous function's
2626         level if we can't find a matching call for a return.
2627
2628 2016-10-28  Markus Metzger  <markus.t.metzger@intel.com>
2629
2630         * btrace.c (ftrace_update_function): Update tail call heuristic.
2631
2632 2016-10-28  Markus Metzger  <markus.t.metzger@intel.com>
2633
2634         * btrace.c (btrace_compute_ftrace_bts, ftrace_add_pt): Allow
2635         leading gaps.
2636         * record-btrace.c (record_btrace_single_step_forward)
2637         (record_btrace_single_step_backward): Jump back to last
2638         instruction if step ends at a gap.
2639         (record_btrace_goto_begin): Skip gaps.
2640
2641 2016-10-28  Markus Metzger  <markus.t.metzger@intel.com>
2642
2643         * btrace.c (ftrace_add_pt): Fix gap indication.  Add warning for non-
2644         contiguous trace and overflow.  Rephrase trace decode warning and print
2645         instruction number.  Remove dead gaps warning.
2646         (btrace_compute_ftrace_bts): Rephrase warnings and print instruction
2647         number.
2648
2649 2016-10-25  Sandra Loosemore  <sandra@codesourcery.com>
2650             Luis Machado  <lgustavo@codesourcery.com>
2651             Pedro Alves  <palves@redhat.com>
2652
2653         PR gdb/20569
2654         * exceptions.c (exception_print_same): Moved here from exec.c.
2655         * exceptions.h (exception_print_same): Declare.
2656         * exec.h: Include "symfile-add-flags.h".
2657         (try_open_exec_file): New declaration.
2658         * exec.c (exception_print_same): Moved to exceptions.c.
2659         (try_open_exec_file): New function.
2660         (exec_file_locate_attach): Rename exec_file and full_exec_path
2661         variables to avoid confusion between target and host pathnames.
2662         Move pathname processing logic to exec_file_find.  Do not return
2663         early if pathname lookup fails; Call try_open_exec_file.
2664         * infrun.c (follow_exec): Split and rename execd_pathname variable
2665         to avoid confusion between target and host pathnames.  Warn if
2666         pathname lookup fails.  Pass target pathname to
2667         target_follow_exec, not hostpathname.  Call try_open_exec_file.
2668         * main.c (symbol_file_add_main_adapter): New function.
2669         (captured_main_1): Use it.
2670         * solib-svr4.c (open_symbol_file_object): Adjust to pass
2671         symfile_add_flags to symbol_file_add_main.
2672         * solib.c (exec_file_find): Incorporate fallback logic for relative
2673         pathnames formerly in exec_file_locate_attach.
2674         * symfile.c (symbol_file_add_main, symbol_file_add_main_1):
2675         Replace 'from_tty' parameter with a symfile_add_file.
2676         (symbol_file_command): Adjust to pass symfile_add_flags to
2677         symbol_file_add_main.
2678         * symfile.h (symbol_file_add_main): Replace 'from_tty' parameter
2679         with a symfile_add_file.
2680
2681 2016-10-26  Pedro Alves  <palves@redhat.com>
2682
2683         * coffread.c (coff_symfile_read): Use symfile_add_flags.
2684         * dbxread.c (dbx_symfile_read): Ditto.
2685         * elfread.c (elf_symfile_read): Ditto.
2686         * inferior.h: Include symfile-add-flags.h.
2687         (struct inferior) <symfile_flags>: Now symfile_add_flags.
2688         * machoread.c (macho_add_oso_symfile, macho_symfile_read_all_oso)
2689         (macho_symfile_read, mipscoff_symfile_read): Use
2690         symfile_add_flags.
2691         * objfile-flags.h: New file.
2692         * objfiles.c (allocate_objfile): Use objfile_flags.
2693         * objfiles.h: Include objfile-flags.h.
2694         (struct objfile) <flags>: Now an objfile_flags.
2695         (OBJF_REORDERED, OBJF_SHARED, OBJF_READNOW, OBJF_USERLOADED)
2696         (OBJF_PSYMTABS_READ, OBJF_MAINLINE, OBJF_NOT_FILENAME): Delete.
2697         Converted to an enum-flags in objfile-flags.h.
2698         (allocate_objfile): Use objfile_flags.
2699         * python/py-objfile.c (objfpy_add_separate_debug_file): Remove
2700         unnecessary local.
2701         * solib.c (solib_read_symbols, solib_add)
2702         (reload_shared_libraries_1): Use symfile_add_flags.
2703         * solib.h: Include "symfile-add-flags.h".
2704         (solib_read_symbols): Use symfile_add_flags.
2705         * symfile-add-flags.h: New file.
2706         * symfile-debug.c (debug_sym_read): Use symfile_add_flags.
2707         * symfile-mem.c (symbol_file_add_from_memory): Use
2708         symfile_add_flags.
2709         * symfile.c (read_symbols, syms_from_objfile_1)
2710         (syms_from_objfile, finish_new_objfile): Use symfile_add_flags.
2711         (symbol_file_add_with_addrs): Use symfile_add_flags and
2712         objfile_flags.
2713         (symbol_file_add_separate): Use symfile_add_flags.
2714         (symbol_file_add_from_bfd, symbol_file_add): Use symfile_add_flags
2715         and objfile_flags.
2716         (symbol_file_add_main_1): : Use objfile_flags.  Fix add_flags vs
2717         flags confusion.
2718         (symbol_file_command): Use objfile_flags.
2719         (add_symbol_file_command): Use symfile_add_flags and
2720         objfile_flags.
2721         (clear_symtab_users): Use symfile_add_flags.
2722         * symfile.h: Include "symfile-add-flags.h" and "objfile-flags.h".
2723         (struct sym_fns) <sym_read>: Use symfile_add_flags.
2724         (clear_symtab_users): Use symfile_add_flags.
2725         (enum symfile_add_flags): Delete, moved to symfile-add-flags.h and
2726         converted to enum-flags.
2727         (symbol_file_add, symbol_file_add_from_bfd)
2728         (symbol_file_add_separate): Use symfile_add_flags.
2729         * xcoffread.c (xcoff_initial_scan): Use symfile_add_flags.
2730
2731 2016-10-26  Pedro Alves  <palves@redhat.com>
2732
2733         * inferior.h (ALL_NON_EXITED_INFERIORS): New macro.
2734         * infrun.c (do_target_resume): Call target_commit_resume.
2735         (proceed): Defer target_commit_resume while looping over threads,
2736         resuming them.  Call target_commit_resume at the end.
2737         * record-btrace.c (record_btrace_commit_resume): New function.
2738         (init_record_btrace_ops): Install it as to_commit_resume method.
2739         * record-full.c (record_full_commit_resume): New function.
2740         (record_full_wait_1): Call the beneath target's to_commit_resume
2741         method.
2742         (init_record_full_ops): Install record_full_commit_resume as
2743         to_commit_resume method.
2744         * remote.c (struct private_thread_info) <last_resume_step,
2745         last_resume_sig, vcont_resumed>: New fields.
2746         (remote_add_thread): Set the new thread's vcont_resumed flag.
2747         (demand_private_info): Delete.
2748         (get_private_info_thread, get_private_info_ptid): New functions.
2749         (remote_update_thread_list): Adjust.
2750         (process_initial_stop_replies): Clear the thread's vcont_resumed
2751         flag.
2752         (remote_resume): If connected in non-stop mode, record the resume
2753         request and return early.
2754         (struct private_inferior): New.
2755         (struct vcont_builder): New.
2756         (vcont_builder_restart, vcont_builder_flush)
2757         (vcont_builder_push_action): New functions.
2758         (MAX_ACTION_SIZE): New macro.
2759         (remote_commit_resume): New function.
2760         (thread_pending_fork_status, is_pending_fork_parent_thread): New
2761         functions.
2762         (check_pending_event_prevents_wildcard_vcont_callback)
2763         (check_pending_events_prevent_wildcard_vcont): New functions.
2764         (process_stop_reply): Adjust.  Clear the thread's vcont_resumed
2765         flag.
2766         (init_remote_ops): Install remote_commit_resume.
2767         * target-delegates.c: Regenerate.
2768         * target.c (defer_target_commit_resume): New global.
2769         (target_commit_resume, make_cleanup_defer_target_commit_resume):
2770         New functions.
2771         * target.h (struct target_ops) <to_commit_resume>: New field.
2772         (target_resume): Update comments.
2773         (target_commit_resume): New declaration.
2774
2775 2016-10-26  Pedro Alves  <palves@redhat.com>
2776
2777         * inferior.c (exit_inferior_1): Free 'priv'.
2778
2779 2016-10-26  Pedro Alves  <palves@redhat.com>
2780
2781         * remote.c (remote_resume_with_hc): New function, factored out
2782         from ...
2783         (remote_resume): ... this.  Always try vCont first.
2784         (remote_vcont_resume): Rename to ...
2785         (remote_resume_with_vcont): ... this.  Bail out if execution
2786         direction is reverse.
2787
2788 2016-10-25  Pedro Alves  <palves@redhat.com>
2789
2790         * dwarf2expr.h (struct dwarf_expr_context) <~dwarf_expr_context>:
2791         Make virtual.
2792
2793 2016-10-25  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
2794
2795         PR build/20712
2796         * defs.h: Remove obsolete comment
2797         (atof): Remove.
2798         * procfs.c (do_destroy_procinfo_cleanup): Add cast.
2799         (sysset_t_alloc): Likewise.
2800         (proc_set_traced_sysentry): Likewise.
2801         (proc_set_traced_sysexit): Likewise.
2802         [!PIOCLSTATUS && NEW_PROC_API] (do_closedir_cleanup): Likewise.
2803         (proc_get_LDT_entry): Initiate cleanups before returns.
2804         (procfs_wait): Use GDB_SIGNAL_0.
2805         (procfs_corefile_thread_callback): Add cast.
2806         * sol-thread.c (td_log_ftype, td_ta_new_ftype, td_ta_delete_ftype)
2807         (td_init_ftype, td_ta_get_ph_ftype, td_ta_get_nthreads_ftype)
2808         (td_ta_tsd_iter_ftype, td_ta_thr_iter_ftype)
2809         (td_thr_validate_ftype, td_thr_tsd_ftype, td_thr_get_info_ftype)
2810         (td_thr_getfpregs_ftype, td_thr_getxregsize_ftype)
2811         (td_thr_getxregs_ftype, td_thr_sigsetmask_ftype)
2812         (td_thr_setprio_ftype, td_thr_setsigpending_ftype)
2813         (td_thr_setfpregs_ftype, td_thr_setxregs_ftype)
2814         (td_ta_map_id2thr_ftype, td_ta_map_lwp2thr_ftype)
2815         (td_thr_getgregs_ftype, td_thr_setgregs_ftype): New typedefs.
2816         (p_td_log, p_td_ta_new, p_td_ta_delete, p_td_init, p_td_ta_get_ph)
2817         (p_td_ta_get_nthreads, p_td_ta_tsd_iter, p_td_ta_thr_iter)
2818         (p_td_thr_validate, p_td_thr_tsd, p_td_thr_get_info)
2819         (p_td_thr_getfpregs, p_td_thr_getxregsize, p_td_thr_getxregs)
2820         (p_td_thr_sigsetmask, p_td_thr_setprio, p_td_thr_setsigpending)
2821         (p_td_thr_setfpregs, p_td_thr_setxregs, p_td_ta_map_id2thr)
2822         (p_td_ta_map_lwp2thr, p_td_thr_getgregs, p_td_thr_setgregs): Use them.
2823         (ps_pdread): Add cast.
2824         (ps_ptread): Likewise.
2825         (resolve): Likewise.
2826         * top.c (gdb_safe_append_history): Print pid_t as long.
2827
2828 2016-10-25  Pedro Alves  <palves@redhat.com>
2829
2830         * common/common-defs.h (__STDC_FORMAT_MACROS): Define.
2831
2832 2016-10-25  Pedro Alves  <palves@redhat.com>
2833
2834         * common/new-op.c: Add comment about -fsanitize=address.
2835
2836 2016-10-25  Pedro Alves  <palves@redhat.com>
2837
2838        * common/common-defs.h (__STDC_CONSTANT_MACROS)
2839        (__STDC_LIMIT_MACROS): Define.
2840
2841 2016-10-25  Yao Qi  <yao.qi@linaro.org>
2842
2843         PR gdb/20716
2844         * common/new-op.c (__has_feature): New macro.
2845         Don't override operator new if asan is used.
2846
2847 2016-10-24  Luis Machado  <lgustavo@codesourcery.com>
2848
2849         * exec.c (exec_file_locate_attach): Prevent NULL pointer dereference
2850         when duplicating a string.
2851
2852 2016-10-24  Luis Machado  <lgustavo@codesourcery.com>
2853
2854         * exec.c (exception_print_same): Fix string comparison to use
2855         statically-allocated ones.
2856
2857 2016-10-21  Tom Tromey  <tom@tromey.com>
2858
2859         * dwarf2expr.h (class dwarf_expr_context)
2860         <get_frame_base, get_frame_cfa, get_tls_address, dwarf_call,
2861         push_dwarf_block_entry_value, get_addr_index, get_object_address>:
2862         Now pure virtual.
2863         * dwarf2-frame.c (class dwarf_expr_executor)
2864         <get_frame_base, get_frame_cfa, get_tls_address, dwarf_call,
2865         push_dwarf_block_entry_value, get_addr_index, get_object_address>:
2866         New methods.
2867         <invalid>: New method.
2868
2869 2016-10-21  Tom Tromey  <tom@tromey.com>
2870
2871         * minsyms.h (minimal_symbol_reader::record_full): "copy_name" now
2872         a bool.
2873         (record, record_with_info): Update.
2874         * minsyms.c (record): Fix indentation.
2875         (record_full): Fix indentation.  Update for type change.
2876         * elfread.c (record_minimal_symbol): "copy_name" now a bool.
2877         (elf_symtab_read): "copy_names" now a bool.
2878         (elf_rel_plt_read, elf_read_minimal_symbols): Update.
2879
2880 2016-10-21  Tom Tromey  <tom@tromey.com>
2881
2882         * main.c: Include <vector>.
2883         (cmdarg_s): Remove typedef.  Don't define VEC.
2884         (captured_main_1): Use vector, not VEC.  Remove cleanups.
2885
2886 2016-10-21  Tom Tromey  <tom@tromey.com>
2887
2888         * dwarf2loc.c (struct dwarf_expr_context_funcs): Don't declare.
2889         (dwarf_expr_read_addr_from_reg, dwarf_expr_get_reg_value)
2890         (dwarf_expr_read_mem, dwarf_expr_frame_base): Rename; turn into
2891         methods.
2892         (get_frame_pc_for_per_cu_dwarf_call): New function.
2893         (dwarf_expr_frame_cfa, dwarf_expr_frame_pc)
2894         (dwarf_expr_tls_address): Rename; turn into methods.
2895         (per_cu_dwarf_call): Remove arguments.  Use
2896         get_frame_pc_for_per_cu_dwarf_call.
2897         (dwarf_evaluate_loc_desc): New class.
2898         (dwarf_expr_dwarf_call, dwarf_expr_context)
2899         (dwarf_expr_push_dwarf_reg_entry_value)
2900         (dwarf_expr_get_addr_index, dwarf_expr_get_obj_addr): Rename; turn
2901         into methods.
2902         (dwarf_expr_ctx_funcs): Remove.
2903         (dwarf2_evaluate_loc_desc_full): Update.
2904         (dwarf2_locexpr_baton_eval): Update.
2905         (symbol_needs_eval_context): New class.
2906         (symbol_needs_read_addr_from_reg, symbol_needs_get_reg_value)
2907         (symbol_needs_read_mem, symbol_needs_frame_base)
2908         (symbol_needs_frame_cfa, symbol_needs_tls_address)
2909         (symbol_needs_dwarf_call, needs_dwarf_reg_entry_value): Rename;
2910         turn into methods.
2911         (needs_get_addr_index, needs_get_obj_addr): Remove; turn into
2912         methods.
2913         (symbol_needs_ctx_funcs): Remove.
2914         (dwarf2_loc_desc_get_symbol_read_needs): Update.
2915         * dwarf2expr.h (struct dwarf_expr_context_funcs): Remove; turn
2916         contents into methods.
2917         (struct dwarf_expr_context) <baton, funcs>: Remove.
2918         <read_addr_from_reg, get_reg_value, read_mem, get_frame_base,
2919         get_frame_cfa, get_frame_pc, get_tls_address, dwarf_call,
2920         impl_get_base_type, push_dwarf_block_entry_value, get_addr_index,
2921         get_object_address>: Declare new methods.
2922         (ctx_no_get_frame_base, ctx_no_get_frame_cfa)
2923         (ctx_no_get_frame_pc, ctx_no_get_tls_address, ctx_no_dwarf_call)
2924         (ctx_no_get_base_type, ctx_no_push_dwarf_reg_entry_value)
2925         (ctx_no_get_addr_index): Don't declare.
2926         * dwarf2expr.c (get_base_type): Use impl_get_base_type.
2927         (execute_stack_op): Update.
2928         (ctx_no_get_frame_base, ctx_no_get_frame_cfa)
2929         (ctx_no_get_frame_pc, ctx_no_get_tls_address, ctx_no_dwarf_call)
2930         (ctx_no_get_base_type, ctx_no_push_dwarf_reg_entry_value)
2931         (ctx_no_get_addr_index): Remove; now methods on
2932         dwarf_expr_context.
2933         * dwarf2-frame.c (read_addr_from_reg): Take a frame_info, not a
2934         baton.
2935         (class dwarf_expr_executor): New class.
2936         (get_reg_value, read_mem): Rename, turn into methods.
2937         (execute_stack_op): Use dwarf_expr_executor.
2938
2939 2016-10-21  Tom Tromey  <tom@tromey.com>
2940
2941         * dwarf2loc.c (per_cu_dwarf_call)
2942         (dwarf_expr_push_dwarf_reg_entry_value)
2943         (dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval)
2944         (needs_dwarf_reg_entry_value)
2945         (dwarf2_loc_desc_get_symbol_read_needs): Update.
2946         * dwarf2expr.h (dwarf_expr_context) <push_address, eval, fetch,
2947         fetch_address, fetch_in_stack_memory, address_type, grow_stack,
2948         push, stack_empty_p, add_piece, get_base_type, execute_stack_op,
2949         pop>: New method declarations.
2950         (dwarf_expr_push_address, dwarf_expr_eval, dwarf_expr_fetch)
2951         (dwarf_expr_fetch_address, dwarf_expr_fetch_in_stack_memory):
2952         Don't declare.
2953         * dwarf2expr.c (address_type, grow_stack, push, push_address)
2954         (pop, fetch, fetch_address, fetch_in_stack_memory)
2955         (stack_empty_p, add_piece, eval, get_base_type)
2956         (execute_stack_op): Rename.  Turn into methods.
2957         * dwarf2-frame.c (execute_stack_op): Update.
2958
2959 2016-10-21  Tom Tromey  <tom@tromey.com>
2960
2961         * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Stack-allocate
2962         dwarf_expr_context.  Remove cleanups.
2963         (dwarf2_locexpr_baton_eval)
2964         (dwarf2_loc_desc_get_symbol_read_needs):  Likewise.
2965         * dwarf2expr.h (dwarf_expr_context, ~dwarf_expr_context): Add
2966         constructors and destructors.
2967         (new_dwarf_expr_context, free_dwarf_expr_context)
2968         (make_cleanup_free_dwarf_expr_context): Don't declare.
2969         * dwarf2-frame.c (execute_stack_op): Stack-allocate
2970         dwarf_expr_context.  Remove cleanups.
2971         (dwarf_expr_context): Rename from new_dwarf_expr_context.  Turn
2972         into constructor.
2973         (free_dwarf_expr_context, free_dwarf_expr_context_cleanup):
2974         Remove.
2975         (~dwarf_expr_context): Rename from
2976         make_cleanup_free_dwarf_expr_context.  Turn into destructor.
2977
2978 2016-10-21  Tom Tromey  <tom@tromey.com>
2979
2980         * dwarf2loc.c: Include <vector>.
2981         (read_pieced_value, write_pieced_value)
2982         (dwarf2_compile_expr_to_ax): Use std::vector.
2983
2984 2016-10-21  Tom Tromey  <tom@tromey.com>
2985
2986         * stack.c (print_stack_frame_to_uiout): Use scoped_restore.
2987         * ui-out.c (make_cleanup_restore_current_uiout)
2988         (restore_current_uiout_cleanup): Remove.
2989         * infrun.c (print_stop_event): Use scoped_restore.
2990         * ui-out.h (make_cleanup_restore_current_uiout): Don't declare.
2991
2992 2016-10-21  Tom Tromey  <tom@tromey.com>
2993
2994         * elfread.c (elf_read_minimal_symbols): Use gdb::unique_ptr.
2995
2996 2016-10-21  Tom Tromey  <tom@tromey.com>
2997
2998         * cli/cli-dump.c (dump_memory_to_file): Use gdb::unique_ptr.
2999         (restore_binary_file): Likewise.
3000
3001 2016-10-21  Tom Tromey  <tom@tromey.com>
3002
3003         * maint.h (scoped_command_stats): New class.
3004         (make_command_stats_cleanup): Don't declare.
3005         * maint.c (struct cmd_stats): Remove.
3006         (~scoped_command_stats): Rename from report_command_stats.  Now a
3007         destructor.
3008         (scoped_command_stats): Rename from make_command_stats_cleanup.
3009         Now a constructor.
3010         * main.c (captured_main_1): New function.  Use
3011         scoped_command_stats.
3012         (captured_main): Call captured_main_1.
3013         * event-top.c (command_handler): Use scoped_command_stats.
3014
3015 2016-10-21  Tom Tromey  <tom@tromey.com>
3016
3017         * mi/mi-main.c (mi_cmd_data_read_memory): Use gdb::unique_ptr.
3018         Remove some cleanups.
3019
3020 2016-10-21  Tom Tromey  <tom@tromey.com>
3021
3022         * tui/tui-interp.c (tui_on_normal_stop, tui_on_signal_received)
3023         (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
3024         (tui_on_no_history, tui_on_user_selected_context_changed):
3025         Update.
3026         * top.h (switch_thru_all_uis): New class.
3027         (SWITCH_THRU_ALL_UIS): Rewrite.
3028         (make_cleanup_restore_current_ui, switch_thru_all_uis_init)
3029         (switch_thru_all_uis_cond, switch_thru_all_uis_next): Don't
3030         declare.
3031         * mi/mi-interp.c (mi_new_thread, mi_thread_exit)
3032         (mi_record_changed, mi_inferior_added, mi_inferior_appeared)
3033         (mi_inferior_exit, mi_inferior_removed, mi_on_signal_received)
3034         (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited)
3035         (mi_on_no_history, mi_on_normal_stop, mi_traceframe_changed)
3036         (mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
3037         (mi_breakpoint_created, mi_breakpoint_deleted)
3038         (mi_breakpoint_modified, mi_output_running_pid, mi_on_resume)
3039         (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
3040         (mi_memory_changed, mi_user_selected_context_changed): Update.
3041         * infrun.c (all_uis_check_sync_execution_done)
3042         (all_uis_on_sync_execution_starting, normal_stop): Update.
3043         * event-top.c (restore_ui_cleanup)
3044         (make_cleanup_restore_current_ui, switch_thru_all_uis_init)
3045         (switch_thru_all_uis_cond, switch_thru_all_uis_next): Remove.
3046         * cli/cli-interp.c (cli_on_normal_stop, cli_on_signal_received)
3047         (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
3048         (cli_on_no_history, cli_on_user_selected_context_changed):
3049         Update.
3050         * breakpoint.c (watchpoint_check): Update.
3051
3052 2016-10-21  Tom Tromey  <tom@tromey.com>
3053
3054         * xcoffread.c (record_minimal_symbol, scan_xcoff_symtab): Add
3055         "reader" argument.  Update.
3056         (xcoff_initial_scan): Update.
3057         * symfile.h (mdebug_build_psymtabs): Add "reader" argument.
3058         * mipsread.c (mipscoff_symfile_read): Update.
3059         (read_alphacoff_dynamic_symtab): Add "reader" argument.  Update.
3060         * minsyms.h (minimal_symbol_reader) <record, record_full>:
3061         Declare.
3062         <m_msym_bunch, m_msym_bunch_index, m_msym_count>: New members.
3063         <record_with_info>: New function, renamed from
3064         prim_record_minimal_symbol_and_info.
3065         * minsyms.c (msym_bunch, msym_bunch_index, msym_count): Remove
3066         globals.
3067         (minimal_symbol_reader): Initialize new members.
3068         (minimal_symbol_reader::record): Renamed from
3069         prim_record_minimal_symbol.
3070         (minimal_symbol_reader::record_full): Renamed from
3071         prim_record_minimal_symbol_full.
3072         (prim_record_minimal_symbol_and_info): Move to minsyms.h; rename.
3073         * mdebugread.c (mdebug_build_psymtabs, parse_partial_symbols)
3074         (record_minimal_symbol): Add "reader" argument.  Update.
3075         (elfmdebug_build_psymtabs): Update.
3076         * machoread.c (macho_symtab_add_minsym, macho_symtab_read): Add
3077         "reader" argument.  Update.
3078         (macho_symfile_read): Update.
3079         * elfread.c (record_minimal_symbol, elf_symtab_read)
3080         (elf_rel_plt_read): Add "reader" argument.  Update.
3081         (elf_read_minimal_symbols): Update.
3082         * dbxread.c (record_minimal_symbol, read_dbx_dynamic_symtab)
3083         (read_dbx_symtab): Add "reader" argument.  Update.
3084         (dbx_symfile_read): Update.
3085         * coffread.c (record_minimal_symbol, coff_symtab_read): Add
3086         "reader" argument.  Update.
3087         (coff_symfile_read): Update.
3088         * coff-pe-read.h (read_pe_exported_syms): Add "reader" argument.
3089         * coff-pe-read.c (add_pe_exported_sym, add_pe_forwarded_sym)
3090         (read_pe_exported_syms): Add "reader" argument.  Update.
3091
3092 2016-10-21  Tom Tromey  <tom@tromey.com>
3093
3094         * xcoffread.c (xcoff_initial_scan): Update.
3095         * mipsread.c (mipscoff_symfile_read): Update.
3096         * minsyms.c (minimal_symbol_reader): Add obj argument.
3097         Initialize member.
3098         (install): Remove objfile argument.  Update.
3099         * mdebugread.c (elfmdebug_build_psymtabs): Update.
3100         * machoread.c (macho_symfile_read): Update.
3101         * elfread.c (elf_read_minimal_symbols): Update.
3102         * dbxread.c (dbx_symfile_read): Update.
3103         * coffread.c (coff_symfile_read): Update.
3104         * minsyms.h (minimal_symbol_reader): Add m_objfile member.
3105         (constructor): Add objfile argument.
3106         (minimal_symbol_reader::install): Remove objfile argument.
3107
3108 2016-10-21  Tom Tromey  <tom@tromey.com>
3109
3110         * xcoffread.c (xcoff_initial_scan): Use
3111         minimal_symbol_reader.
3112         * mipsread.c (mipscoff_symfile_read): Use
3113         minimal_symbol_reader.
3114         * minsyms.h (minimal_symbol_reader): New class.
3115         (init_minimal_symbol_collection)
3116         (make_cleanup_discard_minimal_symbols, install_minimal_symbols):
3117         Don't declare.
3118         * minsyms.c (minimal_symbol_reader): Renamed from
3119         init_minimal_symbol_collection, turned into constructor.
3120         (~minimal_symbol_reader): Renamed from
3121         do_discard_minimal_symbols_cleanup, turned into destructor.
3122         (make_cleanup_discard_minimal_symbols): Remove.
3123         (minimal_symbol_reader::install): Rename form
3124         install_minimal_symbols.
3125         * mdebugread.c (elfmdebug_build_psymtabs): Use
3126         minimal_symbol_reader.
3127         * machoread.c (macho_symfile_read): Use
3128         minimal_symbol_reader.
3129         * elfread.c (elf_read_minimal_symbols): Use
3130         minimal_symbol_reader.
3131         * dbxread.c (dbx_symfile_read): Use minimal_symbol_reader.
3132         * coffread.c (coff_symfile_read): Use
3133         minimal_symbol_reader.
3134
3135 2016-10-21  Tom Tromey  <tom@tromey.com>
3136
3137         * top.c (new_ui_command, wait_sync_command_done)
3138         (gdb_readline_wrapper): Use scoped_restore.
3139         * infrun.c (fetch_inferior_event): Use scoped_restore.
3140         * infcall.c (call_thread_fsm_should_stop): Use scoped_restore.
3141
3142 2016-10-21  Tom Tromey  <tom@tromey.com>
3143
3144         * utils.c (make_cleanup_restore_ui_file, do_restore_ui_file)
3145         (struct restore_ui_file_closure): Remove.
3146         * utils.h (make_cleanup_restore_ui_file): Don't declare.
3147         * guile/scm-ports.c (ioscm_with_output_to_port_worker): Use
3148         scoped_restore.
3149         * top.c (execute_command_to_string): Use scoped_restore.
3150
3151 2016-10-21  Tom Tromey  <tom@tromey.com>
3152
3153         * common/scoped_restore.h: New file.
3154         * utils.h: Include scoped_restore.h.
3155         * top.c (execute_command_to_string): Use scoped_restore.
3156         * python/python.c (python_interactive_command): Use
3157         scoped_restore.
3158         (python_command, execute_gdb_command): Likewise.
3159         * printcmd.c (do_one_display): Use scoped_restore.
3160         * mi/mi-main.c (exec_continue): Use scoped_restore.
3161         * mi/mi-cmd-var.c (mi_cmd_var_assign): Use scoped_restore.
3162         * linux-fork.c (checkpoint_command): Use scoped_restore.
3163         * infrun.c (restore_execution_direction): Remove.
3164         (fetch_inferior_event): Use scoped_restore.
3165         * compile/compile.c (compile_file_command): Use
3166         scoped_restore.
3167         (compile_code_command, compile_print_command): Likewise.
3168         * cli/cli-script.c (execute_user_command): Use
3169         scoped_restore.
3170         (while_command, if_command, script_from_file): Likewise.
3171         * arm-tdep.c (arm_insert_single_step_breakpoint): Use
3172         scoped_restore.
3173
3174 2016-10-21  Tom Tromey  <tom@tromey.com>
3175
3176         * xcoffread.c (read_xcoff_symtab): Make "filestring" const.
3177
3178 2016-10-21  Sangamesh Mallayya  <sangamesh.swamy@in.ibm.com>
3179             Ulrich Weigand  <uweigand@de.ibm.com>
3180
3181         * xcoffread.c (read_xcoff_symtab): Make name of current file as
3182         pst->filename instead of _start_ in AIX.
3183
3184 2016-10-21  Philipp Rudo  <prudo@linux.vnet.ibm.com>
3185
3186         * solist.h (struct target_so_ops): Delete special_symbol_handling
3187         hook.
3188         * solib.c (solib_add, reload_shared_libraries): Adjust.
3189         * solib-aix.c (solib_aix_special_symbol_handling): Delete
3190         (_initialize_solib_aix): Adjust
3191         * solib-darwin.c (darwin_special_symbol_handling): Delete
3192         (_initialize_darwin_solib): Adjust
3193         * solib-dsbt.c (dsbt_special_symbol_handling): Delete
3194         (_initialize_dsbt_solib): Adjust
3195         * solib-frv.c (frv_special_symbol_handling): Delete
3196         (_initialize_frv_solib): Adjust
3197         * solib-svr4.c (svr4_special_symbol_handling): Delete
3198         (_initialize_svr4_solib): Adjust
3199         * solib-target.c (solib_target_special_symbol_handling): Delete
3200         (_initialize_solib_target): Adjust
3201
3202 2016-10-20  Yao Qi  <yao.qi@linaro.org>
3203
3204         * configure.tgt: Don't configure if target is *-*-vxworks*.
3205
3206 2016-10-19  Pedro Alves  <palves@redhat.com>
3207
3208         * config.in: Regenerate.
3209
3210 2016-10-18  Pedro Alves  <palves@redhat.com>
3211
3212         * common/common-defs.h (__STDC_CONSTANT_MACROS)
3213         (__STDC_LIMIT_MACROS): Delete.
3214
3215 2016-10-18  Pedro Alves  <palves@redhat.com>
3216
3217         * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
3218         2692e23a48e21f6daa029e8af9f1a143b7532f47.
3219         * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4:
3220         Regenerate.
3221         * gnulib/import/Makefile: Update.
3222         * gnulib/import/alloca: Update.
3223         * gnulib/import/basename-lgpl: Update.
3224         * gnulib/import/canonicalize-lgpl: Update.
3225         * gnulib/import/config: Update.
3226         * gnulib/import/dirent: Update.
3227         * gnulib/import/dirfd: Update.
3228         * gnulib/import/dirname-lgpl: Update.
3229         * gnulib/import/dirname.h: Update.
3230         * gnulib/import/dosname.h: Update.
3231         * gnulib/import/errno: Update.
3232         * gnulib/import/extra/snippet/arg-nonnull.h: Update.
3233         * gnulib/import/extra/snippet/c++defs.h: Update.
3234         * gnulib/import/extra/snippet/warn-on-use.h: Update.
3235         * gnulib/import/extra/update-copyright: Update.
3236         * gnulib/import/flexmember.h: Update.
3237         * gnulib/import/float+.h: Update.
3238         * gnulib/import/float: Update.
3239         * gnulib/import/float: Update.
3240         * gnulib/import/fnmatch: Update.
3241         * gnulib/import/fnmatch: Update.
3242         * gnulib/import/fnmatch_loop: Update.
3243         * gnulib/import/fpucw.h: Update.
3244         * gnulib/import/frexp: Update.
3245         * gnulib/import/frexpl: Update.
3246         * gnulib/import/gettimeofday: Update.
3247         * gnulib/import/hard-locale: Update.
3248         * gnulib/import/hard-locale.h: Update.
3249         * gnulib/import/inttypes: Update.
3250         * gnulib/import/isnan: Update.
3251         * gnulib/import/isnand-nolibm.h: Update.
3252         * gnulib/import/isnand: Update.
3253         * gnulib/import/isnanl-nolibm.h: Update.
3254         * gnulib/import/isnanl: Update.
3255         * gnulib/import/itold: Update.
3256         * gnulib/import/limits: Update.
3257         * gnulib/import/localcharset: Update.
3258         * gnulib/import/localcharset.h: Update.
3259         * gnulib/import/lstat: Update.
3260         * gnulib/import/m4/00gnulib: Update.
3261         * gnulib/import/m4/absolute-header: Update.
3262         * gnulib/import/m4/alloca: Update.
3263         * gnulib/import/m4/canonicalize: Update.
3264         * gnulib/import/m4/codeset: Update.
3265         * gnulib/import/m4/configmake: Update.
3266         * gnulib/import/m4/dirent_h: Update.
3267         * gnulib/import/m4/dirfd: Update.
3268         * gnulib/import/m4/dirname: Update.
3269         * gnulib/import/m4/double-slash-root: Update.
3270         * gnulib/import/m4/eealloc: Update.
3271         * gnulib/import/m4/errno_h: Update.
3272         * gnulib/import/m4/exponentd: Update.
3273         * gnulib/import/m4/exponentl: Update.
3274         * gnulib/import/m4/extensions: Update.
3275         * gnulib/import/m4/extern-inline: Update.
3276         * gnulib/import/m4/fcntl-o: Update.
3277         * gnulib/import/m4/flexmember: Update.
3278         * gnulib/import/m4/float_h: Update.
3279         * gnulib/import/m4/fnmatch: Update.
3280         * gnulib/import/m4/fpieee: Update.
3281         * gnulib/import/m4/frexp: Update.
3282         * gnulib/import/m4/frexpl: Update.
3283         * gnulib/import/m4/gettimeofday: Update.
3284         * gnulib/import/m4/glibc21: Update.
3285         * gnulib/import/m4/gnulib-cache: Update.
3286         * gnulib/import/m4/gnulib-common: Update.
3287         * gnulib/import/m4/gnulib-comp: Update.
3288         * gnulib/import/m4/gnulib-tool: Update.
3289         * gnulib/import/m4/hard-locale: Update.
3290         * gnulib/import/m4/include_next: Update.
3291         * gnulib/import/m4/inttypes-pri: Update.
3292         * gnulib/import/m4/inttypes: Update.
3293         * gnulib/import/m4/isnand: Update.
3294         * gnulib/import/m4/isnanl: Update.
3295         * gnulib/import/m4/largefile: Update.
3296         * gnulib/import/m4/limits-h: Update.
3297         * gnulib/import/m4/localcharset: Update.
3298         * gnulib/import/m4/locale-fr: Update.
3299         * gnulib/import/m4/locale-ja: Update.
3300         * gnulib/import/m4/locale-zh: Update.
3301         * gnulib/import/m4/longlong: Update.
3302         * gnulib/import/m4/lstat: Update.
3303         * gnulib/import/m4/malloc: Update.
3304         * gnulib/import/m4/malloca: Update.
3305         * gnulib/import/m4/math_h: Update.
3306         * gnulib/import/m4/mbrtowc: Update.
3307         * gnulib/import/m4/mbsinit: Update.
3308         * gnulib/import/m4/mbsrtowcs: Update.
3309         * gnulib/import/m4/mbstate_t: Update.
3310         * gnulib/import/m4/memchr: Update.
3311         * gnulib/import/m4/memmem: Update.
3312         * gnulib/import/m4/mmap-anon: Update.
3313         * gnulib/import/m4/multiarch: Update.
3314         * gnulib/import/m4/nocrash: Update.
3315         * gnulib/import/m4/off_t: Update.
3316         * gnulib/import/m4/pathmax: Update.
3317         * gnulib/import/m4/rawmemchr: Update.
3318         * gnulib/import/m4/readlink: Update.
3319         * gnulib/import/m4/rename: Update.
3320         * gnulib/import/m4/rmdir: Update.
3321         * gnulib/import/m4/signal_h: Update.
3322         * gnulib/import/m4/ssize_t: Update.
3323         * gnulib/import/m4/stat: Update.
3324         * gnulib/import/m4/stdbool: Update.
3325         * gnulib/import/m4/stddef_h: Update.
3326         * gnulib/import/m4/stdint: Update.
3327         * gnulib/import/m4/stdio_h: Update.
3328         * gnulib/import/m4/stdlib_h: Update.
3329         * gnulib/import/m4/strchrnul: Update.
3330         * gnulib/import/m4/string_h: Update.
3331         * gnulib/import/m4/strstr: Update.
3332         * gnulib/import/m4/strtok_r: Update.
3333         * gnulib/import/m4/sys_socket_h: Update.
3334         * gnulib/import/m4/sys_stat_h: Update.
3335         * gnulib/import/m4/sys_time_h: Update.
3336         * gnulib/import/m4/sys_types_h: Update.
3337         * gnulib/import/m4/time_h: Update.
3338         * gnulib/import/m4/unistd_h: Update.
3339         * gnulib/import/m4/warn-on-use: Update.
3340         * gnulib/import/m4/wchar_h: Update.
3341         * gnulib/import/m4/wchar_t: Update.
3342         * gnulib/import/m4/wctype_h: Update.
3343         * gnulib/import/m4/wint_t: Update.
3344         * gnulib/import/malloc: Update.
3345         * gnulib/import/malloca: Update.
3346         * gnulib/import/malloca.h: Update.
3347         * gnulib/import/math: Update.
3348         * gnulib/import/math: Update.
3349         * gnulib/import/mbrtowc: Update.
3350         * gnulib/import/mbsinit: Update.
3351         * gnulib/import/mbsrtowcs-impl.h: Update.
3352         * gnulib/import/mbsrtowcs-state: Update.
3353         * gnulib/import/mbsrtowcs: Update.
3354         * gnulib/import/memchr: Update.
3355         * gnulib/import/memmem: Update.
3356         * gnulib/import/pathmax.h: Update.
3357         * gnulib/import/rawmemchr: Update.
3358         * gnulib/import/readlink: Update.
3359         * gnulib/import/ref-add.sin: Update.
3360         * gnulib/import/ref-del.sin: Update.
3361         * gnulib/import/rename: Update.
3362         * gnulib/import/rmdir: Update.
3363         * gnulib/import/same-inode.h: Update.
3364         * gnulib/import/signal: Update.
3365         * gnulib/import/stat: Update.
3366         * gnulib/import/stdbool: Update.
3367         * gnulib/import/stddef: Update.
3368         * gnulib/import/stdint: Update.
3369         * gnulib/import/stdio: Update.
3370         * gnulib/import/stdlib: Update.
3371         * gnulib/import/str-two-way.h: Update.
3372         * gnulib/import/strchrnul: Update.
3373         * gnulib/import/streq.h: Update.
3374         * gnulib/import/string: Update.
3375         * gnulib/import/stripslash: Update.
3376         * gnulib/import/strnlen1: Update.
3377         * gnulib/import/strnlen1.h: Update.
3378         * gnulib/import/strstr: Update.
3379         * gnulib/import/strtok_r: Update.
3380         * gnulib/import/sys_stat: Update.
3381         * gnulib/import/sys_time: Update.
3382         * gnulib/import/sys_types: Update.
3383         * gnulib/import/time: Update.
3384         * gnulib/import/unistd: Update.
3385         * gnulib/import/unistd: Update.
3386         * gnulib/import/verify.h: Update.
3387         * gnulib/import/wchar: Update.
3388         * gnulib/import/wctype: Update.
3389         * gnulib/import/flexmember.h: New file.
3390         * gnulib/import/hard-locale.c: New file.
3391         * gnulib/import/hard-locale.h: New file.
3392         * gnulib/import/limits.in.h: New file.
3393         * gnulib/import/m4/flexmember.m4: New file.
3394         * gnulib/import/m4/hard-locale.m4: New file.
3395         * gnulib/import/m4/limits-h.m4: New file.
3396
3397 2016-10-18  Pedro Alves  <palves@redhat.com>
3398
3399         * common/common-defs.h: Include "gdb_unique_ptr.h".
3400         * common/gdb_unique_ptr.h: New.
3401
3402 2016-10-18  Maciej W. Rozycki  <macro@imgtec.com>
3403
3404         * i386-tdep.c (i386_mpx_info_bounds): Make sure the architecture
3405         is `bfd_arch_i386' before proceeding.
3406         (i386_mpx_set_bounds): Likewise.
3407
3408 2016-10-18  Maciej W. Rozycki  <macro@imgtec.com>
3409
3410         * tilegx-tdep.c (tilegx_analyze_prologue): Use the `long long'
3411         type for `operands'.
3412
3413 2016-10-17  Simon Marchi  <simon.marchi@ericsson.com>
3414
3415         * mi/mi-main.c (mi_cmd_trace_save): Check if argument is present
3416         before using it.
3417
3418 2016-10-17  Pedro Alves  <palves@redhat.com>
3419
3420         * charset.h (class wchar_iterator) [PHONY_ICONV] <m_desc>: Use
3421         'int' as type.
3422
3423 2016-10-14  Sangamesh Mallayya  <sangamesh.swamy@in.ibm.com>
3424             Ulrich Weigand  <uweigand@de.ibm.com>
3425
3426         * solib-aix.c (solib_aix_bfd_open): Call solib_find so that sysroot
3427         path is set properly if program has a dependency on .a archive and
3428         sysroot is set via set sysroot command.
3429
3430 2016-10-14  Markus Metzger  <markus.t.metzger@intel.com>
3431
3432         * nat/linux-btrace.c: Remove leftover comment.
3433
3434 2016-10-14  Eli Zaretskii  <eliz@gnu.org>
3435
3436         * common/common-defs.h [HAVE_STRINGS_H]: Include strings.h if
3437         available, to get prototypes of 'strcasecmp' and 'strncasecmp'.
3438
3439 2016-10-13  Pedro Alves  <palves@redhat.com>
3440
3441         * contrib/ari/gdb_ari.sh (boolean): Suggest bool instead.
3442         (false, true): Remove checks.
3443
3444 2016-10-12  Tom Tromey  <tom@tromey.com>
3445
3446         * machoread.c (macho_symfile_read_all_oso): Use std::string.
3447
3448 2016-10-12  Tom Tromey  <tom@tromey.com>
3449
3450         * tracepoint.c (trace_dump_command): Remove unnecessary
3451         null_cleanup.
3452
3453 2016-10-12  Tom Tromey  <tom@tromey.com>
3454
3455         * valprint.c (generic_emit_char, count_next_character)
3456         (generic_printstr): Update.
3457         * charset.c (struct wchar_iterator): Move to charset.h.
3458         (wchar_iterator::wchar_iterator): Rename from
3459         make_wchar_iterator, turn into a constructor.
3460         (wchar_iterator::~wchar_iterator): Rename from
3461         do_cleanup_iterator, turn into a destructor.
3462         (make_cleanup_wchar_iterator): Remove.
3463         (wchar_iterator::iterate): Rename from wchar_iterate.  Remove
3464         "iter" argument.  Update.
3465         * charset.h: Include <vector>.
3466         (class wchar_iterator): New class, from old struct
3467         wchar_iterator.
3468         (make_wchar_iterator, make_cleanup_wchar_iterator): Don't
3469         declare.
3470
3471 2016-10-12  Tom Tromey  <tom@tromey.com>
3472
3473         * selftest.c: Include <vector>, not "vec.h".
3474         (self_test_function_ptr): Remove.
3475         (tests): Now a std::vector.
3476         (register_self_test, run_self_tests): Update.
3477
3478 2016-10-13  Pedro Alves  <palves@redhat.com>
3479             Tom Tromey  <tom@tromey.com>
3480
3481         * tid-parse.h (tid_range_parser): New class.
3482         (enum tid_range_state): Move into tid_range_parser's scope.
3483         Remove TID_RANGE_ prefix from all values.
3484         (tid_range_parser_get_tid, tid_range_parser_get_tid_range)
3485         (tid_range_parser_star_range, tid_range_parser_finished)
3486         (tid_range_parser_skip, tid_range_parser_qualified): Don't
3487         declare.
3488         (tid_is_in_list): Update comment.
3489         * tid-parse.c (tid_range_parser::tid_range_parser): New.
3490         (init, finished, get_string, skip, tid_is_qualified)
3491         (get_tid_or_range, get_tid_range, get_tid, star_range): Rename;
3492         turn into methods.
3493         (tid_is_in_list): Adjust.
3494         * cli/cli-utils.h (number_or_range_parser): New class.
3495         (init_number_or_range, get_number_or_range)
3496         (number_range_setup_range): Don't declare.
3497         * cli/cli-utils.c
3498         (number_or_range_parser::number_or_range_parser): New.
3499         (init_number_or_range, get_number_or_range)
3500         (number_range_setup_range): Rename; turn into methods.
3501         (number_is_in_list): Adjust.
3502         * breakpoint.c (map_breakpoint_numbers): Adjust.  Use bool.
3503         (trace_pass_command, get_tracepoint_by_number): Adjust.
3504         * breakpoint.h (get_tracepoint_by_number): Adjust.
3505         * inferior.c (detach_inferior_command, kill_inferior_command)
3506         (remove_inferior_command): Adjust.
3507         * linespec.c (decode_line_2): Adjust.
3508         * memattr.c (mem_enable_command, mem_disable_command)
3509         (mem_delete_command): Adjust.
3510         * printcmd.c (map_display_numbers): Adjust.
3511         * reverse.c (delete_bookmark_command, bookmarks_info): Adjust.
3512         * thread.c (thread_apply_command): Adjust.
3513
3514 2016-10-12  Anton Kolesov  <anton.kolesov@synopsys.com>
3515
3516         * arc-newlib-tdep.c: New file.
3517         * configure.tgt: Add newlib support for ARC.
3518
3519 2016-10-12  Anton Kolesov  <anton.kolesov@synopsys.com>
3520
3521         * arc-tdep.h (struct gdbarch_tdep) <jb_pc>: New field.
3522         * arc-tdep.c (arc_get_longjmp_target): New function.
3523         (arc_gdbarch_init): Set get_longjmp_target if jb_pc is non-negative.
3524         (arc_dump_tdep): Print jb_pc.
3525
3526 2016-10-12  Anton Kolesov  <anton.kolesov@synopsys.com>
3527
3528         * arc-tdep.h (struct gdbarch_tdep): New.
3529         * arc-tdep.c (arc_gdbarch_init): Allocate gdbarch_tdep.
3530
3531 2016-10-12  Yao Qi  <yao.qi@linaro.org>
3532
3533         PR tdep/20682
3534         * aarch64-tdep.c: Replace 32 with AARCH64_D_REGISTER_COUNT.
3535         (aarch64_analyze_prologue): Extend array 'regs' for D registers.
3536         Assert that operand 0 and 1 can be X or D registers.  Update
3537         register number for D registers.  Update registers in frame
3538         cache.
3539         * aarch64-tdep.h (AARCH64_D_REGISTER_COUNT): New macro.
3540
3541 2016-10-10  Yao Qi  <yao.qi@linaro.org>
3542
3543         * arch/arm.h (enum arm_breakpoint_kinds): New.
3544         * arm-tdep.c (arm_remote_breakpoint_from_pc): Use
3545         ARM_BP_KIND_THUMB2.
3546
3547 2016-10-10  Yao Qi  <yao.qi@linaro.org>
3548
3549         * m32c-tdep.c (m32c_gdbarch_init): Rename local 'arch' by
3550         'gdbarch'.
3551
3552 2016-10-10  Yao Qi  <yao.qi@linaro.org>
3553
3554         * v850-tdep.c (v850_breakpoint_from_pc): Use the right
3555         breakpoint instruction.
3556         (v850_dbtrap_breakpoint_from_pc): Remove.
3557         (v850_gdbarch_init): Update.
3558
3559 2016-10-08  Simon Marchi  <simon.marchi@polymtl.ca>
3560
3561         * ui-out.c (push_level): Remove "id" parameter.
3562         (ui_out_begin): Update call.
3563
3564 2016-10-07  Joel Brobecker  <brobecker@adacore.com>
3565
3566         GDB 7.12 released.
3567
3568 2016-10-07  Markus Metzger  <markus.t.metzger@intel.com>
3569
3570         * python/python.c (gdbpy_decode_line): Call
3571         string_to_event_location_basic instead of new_linespec_location.
3572
3573 2016-10-06  Sergio Durigan Junior  <sergiodj@redhat.com>
3574
3575         * target.c (target_supports_multi_process): New function, moved
3576         from...
3577         * target.h (target_supports_multi_process): ... here.  Remove
3578         macro.
3579         * target/target.h (target_supports_multi_process): New prototype.
3580
3581 2016-10-06  Pedro Alves  <palves@redhat.com>
3582
3583         * cp-valprint.c (vtbl_ptr_name): Write "extern const" instead of
3584         EXPORTED_CONST.
3585         * stub-termcap.c: Remove __cplusplus checks.
3586         * common/common-defs.h [!__cplusplus] (EXTERN_C, EXTERN_C_PUSH,
3587         EXTERN_C_POP): Delete.
3588         * common/common-exceptions.h (GDB_XCPT_SJMP): Update comments.
3589         (GDB_XCPT) [!__cplusplus]: Delete.
3590         (throw_exception, throw_exception_sjlj): Update comments.
3591         * guile/guile-internal.h (as_a_scm_t_subr) [!__cplusplus]: Delete.
3592         * guile/guile.c (extension_language_guile): Write "extern const"
3593         instead of EXPORTED_CONST.
3594         * features/feature_to_c.sh: Don't emit !__cplusplus code.  Write
3595         "extern const" instead of EXPORTED_CONST.
3596
3597 2016-10-06  Doug Evans  <dje@google.com>
3598
3599         * python/py-value.c (valpy_long): Handle unsigned values.
3600
3601 2016-10-06  Simon Marchi  <simon.marchi@ericsson.com>
3602
3603         * frame.h: Forward-declare struct ui_out.
3604
3605 2016-10-06  Tom Tromey  <tom@tromey.com>
3606
3607         * MAINTAINERS: Remove Java test maintainer.
3608         * varobj.h (java_varobj_ops): Don't declare.
3609         * valprint.h (struct value_print_options)
3610         <pascal_static_field_print>: Update comment.
3611         * utils.c (producer_is_gcc): Remove java reference.
3612         * symtab.h (struct general_symbol_info): Remove java references.
3613         (SYMBOL_SEARCH_NAME): Likewise.
3614         * objfiles.c (allocate_objfile): Update comment.
3615         * linespec.c (find_linespec_symbols): Remove java references.
3616         * gnu-v3-abi.c (gnuv3_rtti_type, gnuv3_baseclass_offset): Remove
3617         java references.
3618         * gdbtypes.h (struct cplus_struct_type) <is_java>: Remove.
3619         (TYPE_CPLUS_REALLY_JAVA): Remove.
3620         * c-varobj.c (enum vsections): Update comment.
3621         * symtab.c (symbol_set_language, symbol_set_names)
3622         (symbol_natural_name, symbol_demangled_name)
3623         (demangle_for_lookup, symbol_matches_domain)
3624         (default_make_symbol_completion_list_break_on_1): Remove java
3625         references.
3626         (JAVA_PREFIX, JAVA_PREFIX_LEN): Remove.
3627         * psymtab.c (match_partial_symbol, psymtab_search_name)
3628         (lookup_partial_symbol): Remove java references.
3629         * dwarf2read.c (find_slot_in_mapped_hash): Remove java references.
3630         (add_partial_symbol, dwarf2_compute_name, dwarf2_physname)
3631         (dwarf2_add_member_fn, is_vtable_name, read_structure_type)
3632         (process_structure_scope, read_subroutine_type)
3633         (read_subrange_type, load_partial_dies)
3634         (new_symbol_full, determine_prefix, typename_concat)
3635         (dwarf2_name): Remove java references.
3636         (set_cu_language): Treat Java as C++.
3637         * c-typeprint.c (c_type_print_args): Remove java reference.
3638         * defs.h (enum language) <language_java>: Remove.
3639         * Makefile.in (SFILES, HFILES_NO_SRCDIR, COMMON_OBS, YYFILES)
3640         (YYOBJ, local-maintainer-clean): Don't mention java files.
3641         * jv-exp.y, jv-lang.c, jv-lang.h, jv-typeprint.c, jv-valprint.c,
3642         jv-varobj.c: Remove.
3643
3644 2016-10-06  Maciej W. Rozycki  <macro@imgtec.com>
3645
3646         * mips-tdep.c (mips_pseudo_register_type): Make FCRs always
3647         32-bit.
3648
3649 2016-10-06  Maciej W. Rozycki  <macro@imgtec.com>
3650
3651         * mips-tdep.c (mips_pseudo_register_type): Rearrange comments
3652         throughout.
3653
3654 2016-10-06  Markus Metzger  <markus.t.metzger@intel.com>
3655
3656         * stack.c (frame_info): Call val_print_not_saved instead of
3657         val_print_unavailable if frame_id check fails.
3658
3659 2016-10-06  Pedro Alves  <palves@redhat.com>
3660
3661         * jit.c (free_objfile_data): Delete the JIT breakpoint and clear
3662         the cached code address.
3663
3664 2016-10-06  Doug Evans  <dje@google.com>
3665
3666         * features/aarch64-core.xml (cpsr_flags): Elide "type" and specify
3667         "end" in all fields.
3668         * features/aarch64.c: Regenerate.
3669         * features/i386/32bit-mpx.xml (_bndcfgu): Specify type of "preserved"
3670         and "enabled" fields. Correct size of "enabled" field.
3671         * features/i386/64bit-mpx.xml (_bndcfgu): Specify type of "preserved"
3672         and "enabled" fields.
3673         * features/i386/i386-avx-mpx-linux.c: Regenerate.
3674         * features/i386/i386-avx-mpx.c: Regenerate.
3675         * features/i386/i386-avx512-linux.c: Regenerate.
3676         * features/i386/i386-avx512.c: Regenerate.
3677         * features/i386/i386-mpx-linux.c: Regenerate.
3678         * features/i386/i386-mpx.c: Regenerate.
3679         * features/arc-arcompact.c: Regenerate.
3680         * features/arc-v2.c: Regenerate.
3681         * xml-tdesc.c (tdesc_start_field): Require "end" spec.  Single bit
3682         fields default to "bool" type.
3683
3684         Revert 2016-03-15  Doug Evans  <dje@google.com>
3685         * features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
3686         * features/i386/32bit-sse.xml (i386_eflags): Ditto.
3687         * features/i386/64bit-core.xml (i386_eflags): Ditto.
3688         * features/i386/64bit-sse.xml (i386_eflags): Ditto.
3689         * features/i386/x32-core.xml (i386_eflags): Ditto.
3690
3691 2016-10-05  Tom Tromey  <tom@tromey.com>
3692
3693         PR breakpoints/20653:
3694         * location.c (string_to_explicit_location): Use NULL, not '\0'.
3695
3696 2016-10-05  Tom Tromey  <tom@tromey.com>
3697
3698         PR symtab/20652:
3699         * psymtab.c (psymbol_compare): Correctly compare "ginfo.value"
3700         fields.
3701
3702 2016-10-05  Andreas Arnez  <arnez@linux.vnet.ibm.com>
3703
3704         * dwarf2expr.c (dwarf_expr_require_composition): Allow
3705         DW_OP_GNU_uninit.
3706         (execute_stack_op): Use dwarf_expr_require_composition instead of
3707         copying its logic.
3708
3709 2016-10-05  Anton Kolesov  <anton.kolesov@synopsys.com>
3710
3711         * arc-tdep.c (arc_frame_prev_register): Remove annoying log message.
3712
3713 2016-10-05  Yao Qi  <yao.qi@linaro.org>
3714
3715         * features/Makefile (WHICH): Add
3716         rs6000/powerpc-isa205-32l, rs6000/powerpc-isa205-64l,
3717         rs6000/powerpc-isa205-altivec32l, rs6000/powerpc-isa205-altivec64l,
3718         rs6000/powerpc-isa205-vsx32l and rs6000/powerpc-isa205-vsx64l.
3719         * regformats/rs6000/powerpc-isa205-32l.dat: Regenerated.
3720         * regformats/rs6000/powerpc-isa205-64l.dat: Likewise.
3721         * regformats/rs6000/powerpc-isa205-altivec32l.dat: Likewise.
3722         * regformats/rs6000/powerpc-isa205-altivec64l.dat: Likewise.
3723         * regformats/rs6000/powerpc-isa205-vsx32l.dat: Likewise.
3724         * regformats/rs6000/powerpc-isa205-vsx64l.dat: Likewise.
3725
3726 2016-10-05  Yao Qi  <yao.qi@linaro.org>
3727
3728         * features/Makefile (XMLTOC): Add s390-tevx-linux64.xml,
3729         s390-vx-linux64.xml, s390x-tevx-linux64.xml and
3730         s390x-vx-linux64.xml.
3731
3732 2016-10-05  Yao Qi  <yao.qi@linaro.org>
3733
3734         * features/Makefile: Remove i386/*-expedite. Add i386-expedite,
3735         amd64-expedite, and x32-expedite.
3736
3737 2016-10-05  Terry Guo  <terry.guo@arm.com>
3738             Yao Qi  <yao.qi@linaro.org>
3739
3740         * arm-tdep.c: Adjust includes.
3741         * features/Makefile (WHICH): Add "arm/" directory to arm
3742         target descriptions.
3743         (XMLTOC): Likewise.
3744         (arm/arm-with-iwmmxt.dat): Adjust the path for
3745         dependencies.
3746         * features/arm-core.xml: Moved to ...
3747         * features/arm/arm-core.xml: ... it.
3748         * features/arm-fpa.xml: Moved to ...
3749         * features/arm/arm-fpa.xml: ... it.
3750         * features/arm-m-profile.xml: Moved to ...
3751         * features/arm/arm-m-profile.xm: ... it.
3752         * features/arm-vfpv2.xml: Moved to ...
3753         * features/arm/arm-vfpv2.xm: ... it.
3754         * features/arm-vfpv3.xml: Moved to ...
3755         * features/arm/arm-vfpv3.xml: ... it.
3756         * features/arm-with-iwmmxt.c: Moved to ...
3757         * features/arm/arm-with-iwmmxt.c: ... it.
3758         * features/arm-with-iwmmxt.xml: Moved to ...
3759         * features/arm/arm-with-iwmmxt.xml: ... it.
3760         * features/arm-with-m-fpa-layout.c: Moved to ...
3761         * features/arm/arm-with-m-fpa-layout.c: ... it.
3762         * features/arm-with-m-fpa-layout.xml: Moved to ...
3763         * features/arm/arm-with-m-fpa-layout.xml: ... it.
3764         * features/arm-with-m-vfp-d16.c: Moved to ...
3765         * features/arm/arm-with-m-vfp-d16.c: ... it.
3766         * features/arm-with-m-vfp-d16.xml: Moved to ...
3767         * features/arm/arm-with-m-vfp-d16.xml: ... it.
3768         * features/arm-with-m.c: Moved to ...
3769         * features/arm/arm-with-m.c: ... it.
3770         * features/arm-with-m.xml: Moved to ...
3771         * features/arm/arm-with-m.xm: ... it.
3772         * features/arm-with-neon.c: Moved to ...
3773         * features/arm/arm-with-neon.c: ... it.
3774         * features/arm-with-neon.xml: Moved to ...
3775         * features/arm/arm-with-neon.xml: ... it.
3776         * features/arm-with-vfpv2.c: Moved to ...
3777         * features/arm/arm-with-vfpv2.c: ... it.
3778         * features/arm-with-vfpv2.xml: Moved to ...
3779         * features/arm/arm-with-vfpv2.xml: ... it.
3780         * features/arm-with-vfpv3.c: Moved to ...
3781         * features/arm/arm-with-vfpv3.c: ... it.
3782         * features/arm-with-vfpv3.xml: Moved to ...
3783         * features/arm/arm-with-vfpv3.xml: ... it.
3784         * features/xscale-iwmmxt.xml: Moved to ...
3785         * features/arm/xscale-iwmmxt.xml: ... it.
3786
3787 2016-10-03  Antoine Tremblay  <antoine.tremblay@ericsson.com>
3788 2016-10-03  Simon Marchi  <simon.marchi@ericsson.com>
3789
3790         PR gdb/20487
3791         * NEWS: Mention new frame field of =thread-selected event.
3792         * cli/cli-decode.c (add_cmd): Initialize c->suppress_notification.
3793         (add_com_suppress_notification): New function definition.
3794         (cmd_func): Set and restore the suppress_notification flag.
3795         * cli/cli-deicode.h (struct cmd_list_element)
3796         <suppress_notification>: New field.
3797         * cli/cli-interp.c (cli_suppress_notification): New global variable.
3798         (cli_on_user_selected_context_changed): New function.
3799         (_initialize_cli_interp): Attach to user_selected_context_changed
3800         observer.
3801         * command.h (struct cli_suppress_notification): New structure.
3802         (cli_suppress_notification): New global variable declaration.
3803         (add_com_suppress_notification): New function declaration.
3804         * defs.h (enum user_selected_what_flag): New enum.
3805         (user_selected_what): New enum flag type.
3806         * frame.h (print_stack_frame_to_uiout): New function declaration.
3807         * gdbthread.h (print_selected_thread_frame): New function declaration.
3808         * inferior.c (print_selected_inferior): New function definition.
3809         (inferior_command): Remove printing of inferior/thread/frame switch
3810         notifications, notify user_selected_context_changed observer.
3811         * inferior.h (print_selected_inferior): New function declaration.
3812         * mi/mi-cmds.c (struct mi_cmd): Add user_selected_context
3813         suppression to stack-select-frame and thread-select commands.
3814         * mi/mi-interp.c (struct mi_suppress_notification)
3815         <user_selected_context>: Initialize.
3816         (mi_user_selected_context_changed): New function definition.
3817         (_initialize_mi_interp): Attach to user_selected_context_changed.
3818         * mi/mi-main.c (mi_cmd_thread_select): Print thread selection reply.
3819         (mi_execute_command): Handle notification suppression.  Notify
3820         user_selected_context_changed observer on thread change instead of printing
3821         event directly.  Don't send it if command already sends the notification.
3822         (command_notifies_uscc_observer): New function.
3823         (mi_cmd_execute): Don't handle notification suppression.
3824         * mi/mi-main.h (struct mi_suppress_notification)
3825         <user_selected_context>: New field.
3826         * stack.c (print_stack_frame_to_uiout): New function definition.
3827         (select_frame_command): Notify user_selected_context_changed
3828         observer.
3829         (frame_command): Call print_selected_thread_frame if there's no frame
3830         change or notify user_selected_context_changed observer if there is.
3831         (up_command): Notify user_selected_context_changed observer.
3832         (down_command): Likewise.
3833         (_initialize_stack): Suppress user_selected_context notification for
3834         command select-frame.
3835         * thread.c (thread_command): Notify
3836         user_selected_context_changed if the thread has changed, print
3837         thread info directly if it hasn't.
3838         (do_captured_thread_select): Do not print thread switch event.
3839         (print_selected_thread_frame): New function definition.
3840         * tui/tui-interp.c (tui_on_user_selected_context_changed):
3841         New function definition.
3842         (_initialize_tui_interp): Attach to user_selected_context_changed
3843         observer.
3844
3845 2016-09-29  Jan Kratochvil  <jan.kratochvil@redhat.com>
3846
3847         PR gdb/20609 - attach of JIT-debug-enabled inf 7.11.1 regression
3848         * exec.c (exec_file_locate_attach): Add parameter defer_bp_reset.
3849         Use it.
3850         * gdbcore.h (exec_file_locate_attach): Add parameter defer_bp_reset.
3851         * infcmd.c (setup_inferior): Update caller.
3852         * remote.c (remote_add_inferior): Likewise.
3853
3854 2016-09-28  Pedro Alves  <palves@redhat.com>
3855
3856         * infcall.c (run_inferior_call): Remove input from the event
3857         loop while running the infcall.
3858
3859 2016-09-27  Fredrik Hederstierna  <fredrik.hederstierna@verisure.com>
3860
3861         * arm-tdep.c (arm_m_addr_is_magic): New function.
3862         (arm_addr_bits_remove): Call arm_m_addr_is_magic.
3863         (arm_m_exception_unwind_sniffer): Likewise.
3864
3865 2016-09-23  Jon Turney  <jon.turney@dronecode.org.uk>
3866
3867         * windows-nat.c (windows_delete_thread): Adjusting call to
3868         target_mourn_inferior to include ptid_t argument.
3869
3870 2016-09-23  Tom Tromey  <tom@tromey.com>
3871
3872         * utils.h (make_cleanup_dyn_string_delete): Remove declaration.
3873         * utils.c: Don't include dyn-string.h.
3874         (do_dyn_string_delete, make_cleanup_dyn_string_delete): Remove.
3875         * cli/cli-cmds.c: Include <string>.  Don't include dyn-string.h.
3876         (argv_to_string): Rename.  Change return type to std::string.
3877         (alias_command): Use std::string.
3878
3879 2016-09-23  Tom Tromey  <tom@tromey.com>
3880
3881         * objfiles.c: Include <vector>.
3882         (objfile_relocate): Use std::vector.
3883
3884 2016-09-23  Tom Tromey  <tom@tromey.com>
3885
3886         * rust-lang.c: Include <string> and <vector>.
3887         (rust_evaluate_funcall): Use std::vector, std::string.
3888         (rust_evaluate_subexp): Use std::string.
3889         (rust_lookup_symbol_nonlocal): Use std::string.
3890
3891 2016-09-23  Tom Tromey  <tom@tromey.com>
3892
3893         * cp-namespace.c: Include <string>.
3894         (cp_search_static_and_baseclasses)
3895         (cp_lookup_symbol_imports_or_template, find_symbol_in_baseclass):
3896         Use std::string.
3897
3898 2016-09-23  Tom Tromey  <tom@tromey.com>
3899
3900         * break-catch-sig.c: Include <string>.
3901         (signal_catchpoint_print_one): Use std::string.
3902
3903 2016-09-23  Tom Tromey  <tom@tromey.com>
3904
3905         * utils.c (struct restore_ui_out_closure): Remove.
3906         * objfiles.h (terminate_minimal_symbol_table): Don't declare.
3907
3908 2016-09-23  Yao Qi  <yao.qi@linaro.org>
3909
3910         * nat/linux-osdata.c (linux_xfer_osdata_threads): Replace
3911         sprintf with xsnprintf.
3912         (linux_xfer_osdata_fds): Likewise.
3913
3914 2016-09-23  Pedro Alves  <palves@redhat.com>
3915
3916         * Makefile.in (SFILES): Add common/new-op.c.
3917         (COMMON_OBS): Add common/new-op.o.
3918         (new-op.o): New rule.
3919         * common/common-exceptions.h: Include <new>.
3920         (struct gdb_quit_bad_alloc): New type.
3921         * common/new-op.c: New file.
3922
3923 2016-09-22  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
3924
3925         * rs6000-tdep.c (ppc_process_record_op31): Fix
3926         regcache_raw_read_unsigned call using the correct parameter type.
3927
3928 2016-09-22  Anton Kolesov  <anton.kolesov@synopsys.com>
3929
3930         * arc-tdep.c: Fix ARI warning for printf(%p).
3931
3932 2016-09-21  Anton Kolesov  <anton.kolesov@synopsys.com>
3933
3934         * MAINTAINERS (Write After Approval): Add Anton Kolesov.
3935
3936 2016-09-21  Anton Kolesov  <anton.kolesov@synopsys.com>
3937
3938         * Makefile.in (ALL_TARGET_OBS): Add arc-tdep.o.
3939         (HFILES_NO_SRCDIR): Add arc-tdep.h.
3940         (ALLDEPFILES): Add arc-tdep.c.
3941         * NEWS: Mention new ARC port.
3942         * configure.tgt: Add ARC.
3943         * arc-tdep.c: New file.
3944         * arc-tdep.h: New file.
3945         * features/Makefile (XMLTOC): Add arc-v2.xml and arc-arcompact.xml.
3946         * features/arc-v2.xml: New file.
3947         * features/arc-v2.c: New file (generated).
3948         * features/arc-arcompact.xml: New file.
3949         * features/arc-arcompact.c: New file (generated).
3950
3951 2016-09-21  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
3952
3953         * rs6000-tdep.c (ppc_process_record_op63): Fix return of instruction
3954         handlers.
3955
3956 2016-09-21  Tom Tromey  <tom@tromey.com>
3957
3958         PR gdb/20604:
3959         * top.h (quit_force): Update.
3960         * top.c (quit_force): Changed type of first argument.  Don't
3961         evaluate expression.  Pass NULL to kill_or_detach.
3962         * cli/cli-cmds.c (quit_command): Evaluate "args".
3963
3964 2016-09-21  Simon Marchi  <simon.marchi@ericsson.com>
3965
3966         * .gitignore: Ignore more files.
3967         * data-directory/.gitignore: Likewise.
3968
3969 2016-09-21  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
3970
3971         * rs6000-tdep.c (PPC_DQ): New macro.
3972         (ppc_process_record_op4): Add Power ISA 3.0 instructions.
3973         (ppc_process_record_op19): Likewise.
3974         (ppc_process_record_op31): Likewise.
3975         (ppc_process_record_op59): Likewise.
3976         (ppc_process_record_op60): Likewise.
3977         (ppc_process_record_op63): Likewise.
3978         (ppc_process_record): Likewise.
3979         (ppc_process_record_op61): New function.
3980
3981 2016-09-21  Yao Qi  <yao.qi@linaro.org>
3982
3983         * aarch32-linux-nat.c (aarch32_gp_regcache_collect): Keep
3984         bits 20 to 23.
3985
3986 2016-09-20  Tom Tromey  <tom@tromey.com>
3987
3988         * python/py-value.c (convert_value_from_python): Make PyInt_Check
3989         conditional on Python 2.
3990         * python/py-arch.c (archpy_disassemble): Make PyInt_Check
3991         conditional on Python 2.
3992
3993 2016-09-20  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
3994
3995         * rs6000-tdep.c (ppc_process_record_op31): Fix record of Store String
3996         Word instructions.
3997
3998 2016-09-20  Sergio Durigan Junior  <sergiodj@redhat.com>
3999
4000         * fork-inferior.c (startup_inferior): Pass 'event_ptid' instead of
4001         'resume_ptid' to 'target_mourn_inferior'.  Fix regression
4002         introduced by my last commit.
4003
4004 2016-09-19  Pedro Alves  <palves@redhat.com>
4005
4006         * common/gdb_locale.h [!ENABLE_NLS] (gettext, dgettext, dcgettext,
4007         textdomain, bindtextdomain): Delete macros.
4008         * main.c (captured_main) [!ENABLE_NLS]: Skip bintextdomain and
4009         textdomain calls.
4010
4011 2016-09-19  Sergio Durigan Junior  <sergiodj@redhat.com>
4012
4013         * darwin-nat.c (darwin_kill_inferior): Adjusting call to
4014         target_mourn_inferior to include ptid_t argument.
4015         * fork-child.c (startup_inferior): Likewise.
4016         * gnu-nat.c (gnu_kill_inferior): Likewise.
4017         * inf-ptrace.c (inf_ptrace_kill): Likewise.
4018         * infrun.c (handle_inferior_event_1): Likewise.
4019         * linux-nat.c (linux_nat_attach): Likewise.
4020         (linux_nat_kill): Likewise.
4021         * nto-procfs.c (interrupt_query): Likewise.
4022         (procfs_interrupt): Likewise.
4023         (procfs_kill_inferior): Likewise.
4024         * procfs.c (procfs_kill_inferior): Likewise.
4025         * record.c (record_mourn_inferior): Likewise.
4026         * remote-sim.c (gdbsim_kill): Likewise.
4027         * remote.c (remote_detach_1): Likewise.
4028         (remote_kill): Likewise.
4029         * target.c (target_mourn_inferior): Change declaration to accept
4030         new ptid_t argument; use gdb_assert on it.
4031         * target.h (target_mourn_inferior): Move function prototype from
4032         here...
4033         * target/target.h (target_mourn_inferior): ... to here.  Adjust it
4034         to accept new ptid_t argument.
4035         * windows-nat.c (get_windows_debug_event): Adjusting call to
4036         target_mourn_inferior to include ptid_t argument.
4037
4038 2016-09-18  Pedro Alves  <palves@redhat.com>
4039
4040         * s390-linux-nat.c: Include <algorithm>.
4041
4042 2016-09-18  Pedro Alves  <palves@redhat.com>
4043
4044         * breakpoint.c (hardware_watchpoint_inserted_in_range): Explicitly
4045         specify the std:min/std::max specialization.
4046         * exec.c (section_table_read_available_memory): Likewise.
4047         * remote.c (remote_read_qxfer): Likewise.
4048         * target.c (simple_verify_memory): Likewise.
4049
4050 2016-09-16  Simon Marchi  <simark@simark.ca>
4051
4052         * infrun.c (restore_current_uiout_cleanup): Move to ui-out.c.
4053         (print_stop_event): Use make_cleanup_restore_current_uiout.
4054         * python/python.c (execute_gdb_command): Likewise.
4055         * ui-out.c (restore_current_uiout_cleanup): Move from infrun.c.
4056         (make_cleanup_restore_current_uiout): New function definition.
4057         * ui-out.h (make_cleanup_restore_current_uiout): New function
4058         declaration.
4059         * utils.c (do_restore_ui_out): Remove.
4060         (make_cleanup_restore_ui_out): Remove.
4061         * utils.h (make_cleanup_restore_ui_out): Remove.
4062
4063 2016-09-16  Pedro Alves  <palves@redhat.com>
4064
4065         * defs.h (min, max): Delete.
4066         * aarch64-tdep.c: Include <algorithm> and use std::min and
4067         std::max throughout.
4068         * aarch64-tdep.c: Likewise.
4069         * alpha-tdep.c: Likewise.
4070         * amd64-tdep.c: Likewise.
4071         * amd64-windows-tdep.c: Likewise.
4072         * arm-tdep.c: Likewise.
4073         * avr-tdep.c: Likewise.
4074         * breakpoint.c: Likewise.
4075         * btrace.c: Likewise.
4076         * ctf.c: Likewise.
4077         * disasm.c: Likewise.
4078         * doublest.c: Likewise.
4079         * dwarf2loc.c: Likewise.
4080         * dwarf2read.c: Likewise.
4081         * environ.c: Likewise.
4082         * exec.c: Likewise.
4083         * f-exp.y: Likewise.
4084         * findcmd.c: Likewise.
4085         * ft32-tdep.c: Likewise.
4086         * gcore.c: Likewise.
4087         * hppa-tdep.c: Likewise.
4088         * i386-darwin-tdep.c: Likewise.
4089         * i386-tdep.c: Likewise.
4090         * linux-thread-db.c: Likewise.
4091         * lm32-tdep.c: Likewise.
4092         * m32r-tdep.c: Likewise.
4093         * m88k-tdep.c: Likewise.
4094         * memrange.c: Likewise.
4095         * minidebug.c: Likewise.
4096         * mips-tdep.c: Likewise.
4097         * moxie-tdep.c: Likewise.
4098         * nds32-tdep.c: Likewise.
4099         * nios2-tdep.c: Likewise.
4100         * nto-procfs.c: Likewise.
4101         * parse.c: Likewise.
4102         * ppc-sysv-tdep.c: Likewise.
4103         * probe.c: Likewise.
4104         * record-btrace.c: Likewise.
4105         * remote.c: Likewise.
4106         * rs6000-tdep.c: Likewise.
4107         * rx-tdep.c: Likewise.
4108         * s390-linux-nat.c: Likewise.
4109         * s390-linux-tdep.c: Likewise.
4110         * ser-tcp.c: Likewise.
4111         * sh-tdep.c: Likewise.
4112         * sh64-tdep.c: Likewise.
4113         * source.c: Likewise.
4114         * sparc-tdep.c: Likewise.
4115         * symfile.c: Likewise.
4116         * target-memory.c: Likewise.
4117         * target.c: Likewise.
4118         * tic6x-tdep.c: Likewise.
4119         * tilegx-tdep.c: Likewise.
4120         * tracefile-tfile.c: Likewise.
4121         * tracepoint.c: Likewise.
4122         * valprint.c: Likewise.
4123         * value.c: Likewise.
4124         * xtensa-tdep.c: Likewise.
4125         * cli/cli-cmds.c: Likewise.
4126         * compile/compile-object-load.c: Likewise.
4127
4128 2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4129
4130         * s390-linux-nat.c (PER_BIT, PER_EVENT_BRANCH, PER_EVENT_IFETCH)
4131         (PER_EVENT_STORE, PER_EVENT_NULLIFICATION)
4132         (PER_CONTROL_BRANCH_ADDRESS, PER_CONTROL_SUSPENSION)
4133         (PER_CONTROL_ALTERATION): New macros.
4134         (struct s390_debug_reg_state) <break_areas>: New member.
4135         (s390_forget_process): Free break_areas as well.
4136         (s390_linux_new_fork): Copy break_areas as well.
4137         (s390_prepare_to_resume): Install hardware breakpoints.
4138         (s390_can_use_hw_breakpoint): Indicate support for hardware
4139         breakpoints.
4140         (s390_insert_hw_breakpoint, s390_remove_hw_breakpoint): New
4141         linux_nat target methods.
4142         (_initialize_s390_nat): Register them.
4143
4144 2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4145
4146         * nat/linux-nat.h (lwp_is_stepping): New declaration.
4147         * linux-nat.c (lwp_is_stepping): New function.
4148
4149 2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4150
4151         * s390-linux-nat.c (gdbcmd.h): New include.
4152         (s390_show_debug_regs): New function.
4153         (s390_stopped_by_watchpoint): Call it, if show_debug_regs is set.
4154         (s390_prepare_to_resume): Likewise.
4155         (_initialize_s390_nat): Register the command "maint set
4156         show-debug-regs".
4157
4158 2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4159
4160         * s390-linux-nat.c (watch_areas): Remove variable.  Replace by a
4161         member of...
4162         (struct s390_debug_reg_state): ...this.  New struct.
4163         (struct s390_process_info): New struct.
4164         (s390_process_list): New variable.
4165         (s390_find_process_pid, s390_add_process, s390_process_info_get)
4166         (s390_get_debug_reg_state): New functions.
4167         (s390_stopped_by_watchpoint): Now access the watch_areas VEC via
4168         s390_get_debug_reg_state.
4169         (s390_prepare_to_resume): Likewise.
4170         (s390_insert_watchpoint): Likewise.
4171         (s390_remove_watchpoint): Likewise.
4172         (s390_forget_process, s390_linux_new_fork): New linux_nat target
4173         methods.
4174         (_initialize_s390_nat): Register them.
4175
4176 2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4177
4178         * s390-linux-nat.c (s390_watch_area): New typedef.  Define a VEC.
4179         (watch_base): Remove variable.
4180         (watch_areas): New variable.
4181         (s390_stopped_by_watchpoint): Transform operations on the
4182         watch_base list to equivalent operations on the watch_areas VEC.
4183         (s390_prepare_to_resume): Likewise.
4184         (s390_insert_watchpoint): Likewise.
4185         (s390_remove_watchpoint): Likewise.
4186
4187 2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4188
4189         * s390-linux-nat.c (s390_prepare_to_resume): Use advertised lwp
4190         functions instead of accessing lwp_info structure members.
4191         (s390_mark_per_info_changed): New function.
4192         (s390_new_thread): Use it.
4193         (s390_refresh_per_info_cb): New function.
4194         (s390_refresh_per_info): Remove parameter.  Refresh all lwps of
4195         the current process.
4196         (s390_insert_watchpoint): Adjust call to s390_refresh_per_info.
4197         (s390_remove_watchpoint): Likewise.
4198
4199 2016-09-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4200
4201         * elfread.c (auxv.h): New include.
4202         (elf_gnu_ifunc_resolve_addr): Pass HWCAP to ifunc resolver.
4203
4204 2016-09-08  Tom Tromey  <tom@tromey.com>
4205
4206         * remote.c (remote_notif_stop_ack, remote_wait_as)
4207         (show_remote_cmd): Remove unneeded casts.
4208
4209 2016-09-06  Pedro Alves  <palves@redhat.com>
4210
4211         * top.c (wait_sync_command_done): Don't assume current_ui doesn't
4212         change across events.  Restore the current UI before returning.
4213         (gdb_readline_wrapper): Restore the current UI before returning.
4214
4215 2016-09-06  Pedro Alves  <palves@redhat.com>
4216
4217         * event-top.c (restore_ui_cleanup): Now static.
4218         (make_cleanup_restore_current_ui): New function.
4219         (switch_thru_all_uis_init): Use it.
4220         * infcall.c (call_thread_fsm_should_stop): Use it.
4221         * infrun.c (fetch_inferior_event): Use it.
4222         * top.c (new_ui_command): Use it.
4223         * top.h (restore_ui_cleanup): Delete declaration.
4224         (make_cleanup_restore_current_ui): New declaration.
4225
4226 2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>
4227
4228         * i386-tdep.c (i386_floatformat_for_type): New function.
4229         (i386_gdbarch_init): Install it.
4230         * ppc-linux-tdep.c (ppc_floatformat_for_type): New function.
4231         (ppc_linux_init_abi): Install it.
4232
4233 2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>
4234
4235         * gdbarch.sh (floatformat_for_type): New gdbarch callback.
4236         * gdbarch.h, gdbarch.c: Re-generate.
4237         * arch-utils.h (default_floatformat_for_type): New prototype.
4238         * arch-utils.c (default_floatformat_for_type): New function.
4239
4240         * doublest.c (floatformat_from_length): Remove.
4241         (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL.
4242         * gdbtypes.c (verify_floatformat): Require non-NULL format.
4243
4244         * dwarf2read.c (dwarf2_init_float_type): New function.
4245         (read_base_type): Use it.
4246         * stabsread.c (dbx_init_float_type): New function.
4247         (read_sun_floating_type): Use it.
4248         (read_range_type): Likewise.
4249
4250 2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>
4251
4252         * ada-lang.c (ada_language_arch_info): Use gdbarch-provided
4253         platform ABI floating-point formats for built-in types.
4254         * d-lang.c (build_d_types): Likewise.
4255         * f-lang.c (build_fortran_types): Likewise.
4256         * m2-lang.c (build_m2_types): Likewise.
4257         * mdebugread.c (basic_type): Likewise.
4258
4259         * go-lang.c (build_go_types): Use IEEE floating-point formats
4260         for language built-in types as mandanted by the language.
4261         * jv-lang.c (build_java_types): Likewise.
4262         * rust-lang.c (rust_language_arch_info): Likewise.
4263         * stabsread.c (rs6000_builtin_type): Likewise.
4264
4265 2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>
4266
4267         * gdbtypes.c (init_type): Remove "char" special case.
4268         (arch_integer_type): Likewise.
4269         (gdbtypes_post_init): Set TYPE_NOSIGN for "char" type.
4270         (objfile_type): Likewise.
4271         * mdebugread.c (basic_type): Likewise.
4272         * stabsread.c (rs6000_builtin_type): Likewise.
4273
4274 2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>
4275
4276         * gdbtypes.h (enum type_flag_value): Remove.
4277         Remove references to TYPE_FLAG_... in comments throughout.
4278         * gdbtypes.c (recursive_dump_type): Do not print TYPE_FLAG_...
4279         flags, print the corresponding TYPE_... access macro names.
4280         Remove references to TYPE_FLAG_... in comments throughout.
4281         * infcall.c: Remove references to TYPE_FLAG_... in comments.
4282         * valprint.c: Likewise.
4283         * gdb-gdb.py (class TypeFlag): No longer consider TYPE_FLAG_...
4284         values, only TYPE_INSTANCE_FLAG_... values.
4285         (class TypeFlagsPrinter): Likewise.
4286
4287 2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>
4288
4289         * gdbtypes.h (init_type): Remove FLAGS argument.  Move OBJFILE
4290         argument to first position.
4291         (init_integer_type): New prototype.
4292         (init_character_type): Likewise.
4293         (init_boolean_type): Likewise.
4294         (init_float_type): Likewise.
4295         (init_decfloat_type): Likewise.
4296         (init_complex_type): Likewise.
4297         (init_pointer_type): Likewise.
4298         * gdbtypes.c (verify_floatflormat): New function.
4299         (init_type): Remove FLAGS argument and processing.  Move OBJFILE
4300         argument to first position.
4301         (init_integer_type): New function.
4302         (init_character_type): Likewise.
4303         (init_boolean_type): Likewise.
4304         (init_float_type): Likewise.
4305         (init_decfloat_type): Likewise.
4306         (init_complex_type): Likewise.
4307         (init_pointer_type): Likewise.
4308         (arch_float_type): Use verify_floatflormat.
4309         (objfile_type): Use init_..._type helpers instead of calling
4310         init_type directly.
4311         * dwarf2read.c (fixup_go_packaging): Update to changed init_type
4312         prototype.
4313         (read_namespace_type): Likewise.
4314         (read_module_type): Likewise.
4315         (read_typedef): Likewise.
4316         (read_unspecified_type): Likewise.
4317         (build_error_marker_type): Likewise.
4318         (read_base_type): Use init_..._type helpers.
4319         * mdebugread.c (basic_type): Use init_..._type helpers.
4320         (parse_type): Update to changed init_type prototype.
4321         (cross_ref): Likewise.
4322         * stabsread.c (rs6000_builtin_type): Use init_..._type helpers.
4323         (read_sun_builtin_type): Likewise.
4324         (read_sun_floating_type): Likewise.
4325         (read_range_type): Likewise.  Also update to changed init_type
4326         prototype.
4327
4328 2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>
4329
4330         * gdbtypes.h (arch_decfloat_type): New prototype.
4331         (arch_pointer_type): Likewise.
4332         * gdbtypes.c (arch_decfloat_type): New function.
4333         (arch_pointer_type): Likewise.
4334         (gdbtypes_post_init): Use arch_decfloat_type.
4335         * avr-tdep.c (avr_gdbarch_init): Use arch_pointer_type.
4336         * ft32-tdep.c (ft32_gdbarch_init): Likewise.
4337         * m32c-tdep.c (make_types): Likewise.
4338         * rl78-tdep.c (rl78_gdbarch_init): Likewise.
4339
4340 2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>
4341
4342         * gdbtypes.c (set_type_code): New function.
4343         (init_type, arch_type): Use it.
4344
4345 2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>
4346
4347         * ada-lang.c (ada_language_arch_info): Use gdbarch_long_double_bit
4348         instead of gdbarch_double_bit for "long_long_float".
4349
4350 2016-09-05  Pedro Alves  <palves@redhat.com>
4351
4352         * NEWS: Mention that a C++ compiler is now required.
4353         * Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
4354         (COMPILE.pre, CC_LD): Use CXX directly.
4355         (INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
4356         * acinclude.m4: Don't include build-with-cxx.m4.
4357         * build-with-cxx.m4: Delete file.
4358         * configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
4359         * warning.m4: Assume $enable_build_with_cxx is yes.
4360         * configure: Regenerate.
4361
4362 2016-09-05  Pedro Alves  <palves@redhat.com>
4363
4364         PR backtrace/19927
4365         * frame.c (get_frame_id): Compute the frame id if not computed
4366         yet.
4367         (unwind_to_current_frame): Delete.
4368         (get_current_frame): Use get_prev_frame_always_1 to get the
4369         current frame and assert that that always succeeds.
4370         (get_prev_frame_if_no_cycle): Skip cycle detection if returning
4371         the current frame.
4372
4373 2016-09-02  Tom Tromey  <tom@tromey.com>
4374
4375         PR gdb/11616:
4376         * dwarf2read.c (decode_locdesc): Handle DW_OP_form_tls_address.
4377         * dwarf2loc.c (dwarf2_compile_expr_to_ax): Handle
4378         DW_OP_form_tls_address.
4379         (locexpr_describe_location_piece): Likewise.
4380         * dwarf2expr.h (struct dwarf_expr_context_funcs): Update comment.
4381         * dwarf2expr.c (execute_stack_op): Handle DW_OP_form_tls_address.
4382         (ctx_no_get_tls_address): Mention DW_OP_form_tls_address.
4383         * compile/compile-loc2c.c (struct insn_info): Update comment.
4384         (compute_stack_depth_worker): Handle DW_OP_form_tls_address.
4385
4386 2016-09-01  Sergio Durigan Junior  <sergiodj@redhat.com>
4387
4388         * target.c (target_wait): Mention that the function's prototype
4389         can be found at target/target.h.
4390         * target.h (target_wait): Move prototype from here...
4391         * target/target.h (target_wait): ... to here.
4392
4393 2016-09-01  Sergio Durigan Junior  <sergiodj@redhat.com>
4394
4395         * fork-child.c (startup_inferior): Replace calls to target_resume
4396         by target_continue{,_no_signal}, depending on the case.
4397         * linux-nat.c (cleanup_target_stop): Call
4398         target_continue_no_signal instead of target_resume.
4399         * procfs.c (procfs_wait): Likewise.
4400         * target.c (target_continue): New function.
4401         * target/target.h (target_continue): New prototype.
4402
4403 2016-08-31  Yao Qi  <yao.qi@linaro.org>
4404
4405         * record-full.c (record_full_insert_breakpoint): Fix typo.
4406
4407 2016-08-30  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4408
4409         * thread.c (tp_array_compar): Insert missing parentheses.
4410
4411 2016-08-25  Andreas Arnez  <arnez@linux.vnet.ibm.com>
4412
4413         * xtensa-tdep.h (XTENSA_GDBARCH_TDEP_INSTANTIATE): Replace
4414         designated initializer list by plain initializer list, for C++
4415         compliance.
4416
4417 2016-08-25  Adhemerval Zanella  <adhemerval.zanella@linaro.org>
4418
4419         * aarch64-linux-nat.c (ps_get_thread_area): Remove const from
4420         struct ps_prochandle.
4421         * amd64-linux-nat.c (ps_get_thread_area): Likewise.
4422         * arm-linux-nat.c (ps_get_thread_area): Likewise.
4423         * gdb_proc_service.h (ps_get_thread_area): Likewise.
4424         * i386-linux-nat.c (ps_get_thread_area): Likewise.
4425         * m68klinux-nat.c (ps_get_thread_area): Likewise.
4426         * mips-linux-nat.c (ps_get_thread_area): Likewise.
4427         * nat/aarch64-linux.c (aarch64_ps_get_thread_area): Likewise.
4428         * nat/aarch64-linux.h (aarch64_ps_get_thread_area): Likewise.
4429         * xtensa-linux-nat.c (ps_get_thread_area): Likewise.
4430
4431 2016-08-24  Simon Marchi  <simon.marchi@ericsson.com>
4432
4433         * infcmd.c (set_inferior_io_terminal): Set inferior terminal to
4434         NULL if terminal_name is an empty string.
4435         (_initialize_infcmd): Make the argument of "set inferior-tty"
4436         optional, mention it in the help doc.
4437
4438 2016-08-24  Carl Love  <cel@us.ibm.com>
4439
4440         * rs6000-tdep.c (rs6000_gdbarch_init): Remove call
4441         set_gdbarch_deprecated_fp_regnum() architecture
4442         initialization function.
4443
4444 2016-08-23  Simon Marchi  <simon.marchi@ericsson.com>
4445
4446         * stack.c (parse_frame_specification): Fix typo in comment.
4447
4448 2016-08-23  Pedro Alves  <palves@redhat.com>
4449
4450         PR gdb/20494
4451         * inflow.c (our_terminal_info, initial_gdb_ttystate): Update
4452         comments.
4453         (enum gdb_has_a_terminal_flag_enum, gdb_has_a_terminal_flag):
4454         Delete.
4455         (set_initial_gdb_ttystate): Record our_terminal_info here too,
4456         instead of ...
4457         (gdb_has_a_terminal): ... here.  Reimplement in terms of
4458         initial_gdb_ttystate.  Make static.
4459         * terminal.h (gdb_has_a_terminal): Delete declaration.
4460         (set_initial_gdb_ttystate): Add comment.
4461         * top.c (show_interactive_mode): Use input_interactive_p instead
4462         of gdb_has_a_terminal.
4463
4464 2016-08-22  Pedro Alves  <palves@redhat.com>
4465
4466         PR gdb/20505
4467         * linux-tdep.c (linux_vsyscall_range_raw): For core inferiors,
4468         find the vDSO's start address with AT_SYSINFO_EHDR too, and
4469         determine the vDSO's size by finding the PT_LOAD segment that
4470         matches AT_SYSINFO_EHDR.
4471
4472 2016-08-19  Yao Qi  <yao.qi@linaro.org>
4473
4474         * aarch64-tdep.c (aarch64_analyze_prologue): Handle register
4475         based STP instruction.
4476
4477 2016-08-19  Yao Qi  <yao.qi@linaro.org>
4478
4479         * completer.c (linespec_location_completer): Make file_to_match
4480         null-terminated.
4481
4482 2016-08-19  Pedro Alves  <palves@redhat.com>
4483
4484         * amd64-tdep.c (amd64_relocate_instruction) <callq>: Handle return
4485         addresses over 0x7fffffff.
4486
4487 2016-08-18  Carl Love  <cel@us.ibm.com>
4488
4489         * MAINTANERS Write After Approval): Add "Carl Love".
4490
4491 2016-08-18  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
4492
4493         * rs6000-tdep.c (ppc_process_record_op31): Handle HTM instructions.
4494
4495 2016-08-17  Simon Marchi  <simon.marchi@ericsson.com>
4496
4497         * inferior.c (remove_inferior_command): Fix error message.
4498
4499 2016-08-17  Simon Marchi  <simon.marchi@ericsson.com>
4500
4501         * inferior.c (exit_inferior_1): Remove comment.
4502
4503 2016-08-15  Matthew Wahab  <matthew.wahab@arm.com>
4504
4505         PR gdb/20457
4506         * gdb_proc_service.h: Add an include of gregset.h
4507         [!HAVE_PROC_SERVICE_H]: Remove the include of gregset.h.
4508
4509 2016-08-15  Yao Qi  <yao.qi@linaro.org>
4510
4511         * location.c (explicit_location_lex_one): Compare the return
4512         value of strncmp with zero.  Don't check (*inp)[9].  Increment
4513         *inp by 8.
4514
4515 2016-08-11  Pedro Alves  <palves@redhat.com>
4516
4517         PR gdb/20413
4518         * nat/linux-ptrace.c: Include <sys/procfs.h> instead of
4519         "gregset.h".
4520
4521 2016-08-10  Pedro Alves  <palves@redhat.com>
4522
4523         PR gdb/19187
4524         * record-full.c (record_full_remove_breakpoint): Don't remove the
4525         breakpoint from the record_full_breakpoints VEC if we're detaching
4526         the breakpoint from a fork child.
4527
4528 2016-08-10  Pedro Alves  <palves@redhat.com>
4529
4530         PR gdb/19187
4531         * break-catch-sig.c (signal_catchpoint_remove_location): Adjust
4532         interface.
4533         * break-catch-syscall.c (remove_catch_syscall):
4534         * breakpoint.c (enum remove_bp_reason): Moved to breakpoint.h.
4535         (remove_breakpoint_1): Pass 'reason' down.
4536         (remove_catch_fork, remove_catch_vfork, remove_catch_solib)
4537         (remove_catch_exec, remove_watchpoint, remove_masked_watchpoint)
4538         (base_breakpoint_remove_location, bkpt_remove_location)
4539         (bkpt_probe_remove_location, bkpt_probe_remove_location): Adjust
4540         interface.
4541         * breakpoint.h (enum remove_bp_reason): Moved here from
4542         breakpoint.c.
4543         (struct breakpoint_ops) <remove_location>: Add 'reason' parameter.
4544         * corelow.c (core_remove_breakpoint): New function.
4545         (init_core_ops): Install it as to_remove_breakpoint method.
4546         * exec.c (exec_remove_breakpoint): New function.
4547         (init_exec_ops): Install it as to_remove_breakpoint method.
4548         * mem-break.c (memory_remove_breakpoint): Adjust interface.
4549         * record-btrace.c (record_btrace_remove_breakpoint): Adjust
4550         interface.
4551         * record-full.c (record_full_remove_breakpoint)
4552         (record_full_core_remove_breakpoint): Adjust interface.
4553         * remote.c (remote_remove_breakpoint): Adjust interface.
4554         * target-debug.h (target_debug_print_enum_remove_bp_reason): New
4555         macro.
4556         * target-delegates.c: Regenerate.
4557         * target.c (target_remove_breakpoint): Add 'reason' parameter.
4558         * target.h (struct target_ops) <to_remove_breakpoint>: Add
4559         'reason' parameter.
4560         (target_remove_breakpoint, memory_remove_breakpoint): Add 'reason'
4561         parameter.
4562
4563 2016-08-10  Pedro Alves  <palves@redhat.com>
4564
4565         PR gdb/19187
4566         * breakpoint.c (insertion_state_t): Delete.
4567         (enum remove_bp_reason): New.
4568         (detach_breakpoints, remove_breakpoint_1, remove_breakpoint):
4569         Adjust to use enum remove_bp_reason instead of insertion_state_t.
4570
4571 2016-08-10  Pedro Alves  <palves@redhat.com>
4572
4573         PR gdb/19187
4574         * breakpoint.c (remove_breakpoint): Remove 'is' parameter and
4575         always pass mark_uninserted to remove_breakpoint_1.
4576         (insert_breakpoint_locations, remove_breakpoints)
4577         (remove_breakpoints_pid, update_global_location_list): Update
4578         callers.
4579
4580 2016-08-10  Руслан Ижбулатов  <lrn1986@gmail.com>
4581             Pedro Alves  <palves@redhat.com>
4582
4583         * windows-nat.c (MS_VC_EXCEPTION): New define.
4584         (handle_exception_result): New enum.
4585         (windows_delete_thread): Free the thread's name.
4586         (handle_exception): Handle MS_VC_EXCEPTION.
4587         (get_windows_debug_event): Handle HANDLE_EXCEPTION_IGNORED.
4588         (windows_thread_name): New function.
4589         (windows_target): Install it as to_thread_name method.
4590         * NEWS: Mention the thread naming support on MS-Windows.
4591
4592 2016-08-10  Pedro Alves  <palves@redhat.com>
4593
4594         * common/signals-state-save-restore.c
4595         (save_original_signals_state, restore_original_signals_state):
4596         Wrap perror_with_name arguments with '()'.
4597
4598 2016-08-09  Pedro Alves  <palves@redhat.com>
4599
4600         PR gdb/20418
4601         * event-top.c (ui_register_input_event_handler)
4602         (ui_unregister_input_event_handler): New functions.
4603         (async_enable_stdin): Register input in the event loop.
4604         (async_disable_stdin): Unregister input from the event loop.
4605         (gdb_setup_readline): Register input in the event loop.
4606         * infrun.c (check_curr_ui_sync_execution_done): Register input in
4607         the event loop.
4608         * target.c (target_terminal_inferior): Don't unregister input from
4609         the event loop.
4610         (target_terminal_ours): Don't register input in the event loop.
4611         * target.h (target_terminal_inferior)
4612         (target_terminal_ours_for_output, target_terminal_ours): Update
4613         comments.
4614         * top.h (ui_register_input_event_handler)
4615         (ui_unregister_input_event_handler): New declarations.
4616         * utils.c (ui_unregister_input_event_handler_cleanup)
4617         (prepare_to_handle_input): New functions.
4618         (defaulted_query, prompt_for_continue): Use
4619         prepare_to_handle_input.
4620
4621 2016-08-09  Pedro Alves  <palves@redhat.com>
4622
4623         PR mi/20431
4624         * mi/mi-main.c (mi_execute_command): Enable input and set prompt
4625         state to PROMPT_NEEDED.
4626
4627 2016-08-09  Pedro Alves  <palves@redhat.com>
4628
4629         PR gdb/18653
4630         * Makefile.in (SFILES): Add
4631         common/signals-state-save-restore.c.
4632         (HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h.
4633         (COMMON_OBS): Add signals-state-save-restore.o.
4634         (signals-state-save-restore.o): New rule.
4635         * configure: Regenerate.
4636         * fork-child.c: Include "signals-state-save-restore.h".
4637         (fork_inferior): Call restore_original_signals_state.
4638         * main.c: Include "signals-state-save-restore.h".
4639         (captured_main): Call save_original_signals_state.
4640         * common/common.m4: Add sigaction to AC_CHECK_FUNCS checks.
4641         * common/signals-state-save-restore.c: New file.
4642         * common/signals-state-save-restore.h: New file.
4643
4644 2016-08-09  Pedro Alves  <palves@redhat.com>
4645
4646         * value.c (unpack_value_bitfield): Skip unpacking if the parent
4647         has no contents buffer to begin with.
4648
4649 2016-08-08  Pedro Alves  <palves@redhat.com>
4650
4651         * features/i386/amd64-avx-mpx-linux.c: Regenerate.
4652         * features/i386/amd64-avx-mpx.c: Regenerate.
4653         * features/i386/i386-avx-mpx-linux.c: Regenerate.
4654         * features/i386/i386-avx-mpx.c: Regenerate.
4655
4656 2016-08-05  Simon Marchi  <simon.marchi@ericsson.com>
4657
4658         * event-top.h (cli_command_loop): Remove.
4659
4660 2016-08-05  Pedro Alves  <palves@redhat.com>
4661
4662         PR remote/20398
4663         * remote-fileio.c (remote_fileio_quit_handler): Check the quit
4664         flag before calling quit.
4665
4666 2016-08-05  Pedro Alves  <palves@redhat.com>
4667
4668         * NEWS: Mention that GDB and GDBserver build with a C++ compiler
4669         by default.
4670
4671 2016-08-05  Pedro Alves  <palves@redhat.com>
4672
4673         * build-with-cxx.m4: Change help string to be in terms of
4674         --disable-build-with-cxx.
4675         * configure: Regenerate.
4676
4677 2016-08-04  Yao Qi  <yao.qi@linaro.org>
4678
4679         * aarch64-linux-nat.c (tdesc_arm_with_vfpv3): Remove the
4680         declaration.
4681         (aarch64_linux_read_description): Remove code on getting
4682         auxv and select target description on it.  Select target
4683         description by the result of NT_ARM_VFP ptrace request.
4684
4685 2016-08-03  Tom Tromey  <tom@tromey.com>
4686
4687         PR python/18565:
4688         * python/py-frame.c (frapy_function): Use find_frame_funname.
4689
4690 2016-08-03  Tom Tromey  <tom@tromey.com>
4691
4692         * stack.c (find_frame_funname): Avoid any possible leak in case
4693         cp_remove_params can throw.
4694
4695 2016-08-03  Tom Tromey  <tom@tromey.com>
4696
4697         * NEWS: Mention new Python breakpoint events.
4698
4699 2016-08-02  Tom Tromey  <tom@tromey.com>
4700
4701         * MAINTAINERS (Core): Add self as Rust maintainer.
4702
4703 2016-08-01  Joel Brobecker  <brobecker@adacore.com>
4704
4705         * NEWS: Create a new section for the next release branch.
4706         Rename the section of the current branch, now that it has
4707         been cut.
4708
4709 2016-08-01  Joel Brobecker  <brobecker@adacore.com>
4710
4711         GDB 7.12 branch created (41bfcd638a4e0e48b96ce4de2845372dea481322):
4712         * version.in: Bump version to 7.12.50.DATE-git.
4713
4714 2016-07-27  Alan Modra  <amodra@gmail.com>
4715
4716         * amd64-darwin-tdep.c: Don't include libbfd.h.
4717         * i386-darwin-tdep.c: Likewise.
4718         * rs6000-nat.c: Likewise.
4719         * rs6000-tdep.c: Likewise.
4720
4721 2016-07-26  Tom Tromey  <tom@tromey.com>
4722
4723         * symtab.c (register_symbol_computed_impl): Update.
4724         PR python/20190:
4725         * value.h (symbol_read_needs): Declare.
4726         (symbol_read_needs_frame): Add comment.
4727         * symtab.h (struct symbol_computed_ops) <read_variable>: Update
4728         comment.
4729         <get_symbol_read_needs>: Rename.  Change return type.
4730         * findvar.c (symbol_read_needs): New function.
4731         (symbol_read_needs_frame): Rewrite.
4732         (default_read_var_value): Use symbol_read_needs.
4733         * dwarf2loc.c (struct symbol_needs_baton): Rename.
4734         <needs>: Renamed from needs_frame.  Changed type.
4735         (needs_frame_read_addr_from_reg, symbol_needs_get_reg_value)
4736         (symbol_needs_read_mem, symbol_needs_frame_base)
4737         (symbol_needs_frame_cfa, symbol_needs_tls_address)
4738         (symbol_needs_dwarf_call): Rename.
4739         (needs_dwarf_reg_entry_value): Update.
4740         (symbol_needs_ctx_funcs, dwarf2_loc_desc_get_symbol_read_needs):
4741         Rename and update.
4742         (locexpr_get_symbol_read_needs, loclist_symbol_needs): Likewise.
4743         (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
4744         * defs.h (enum symbol_needs_kind): New.
4745
4746 2016-07-26  Pedro Alves  <palves@redhat.com>
4747
4748         * nat/linux-ptrace.c: Include "gregset.h".
4749         (linux_ptrace_test_ret_to_nx): Use PTRACE_GETREGS instead of
4750         PTRACE_PEEKUSER.
4751
4752 2016-07-26  Pedro Alves  <palves@redhat.com>
4753
4754         * amd64-linux-nat.c (amd64_linux_siginfo_fixup): Rename 'native'
4755         parameter to 'ptrace'.
4756         * nat/amd64-linux-siginfo.c (GDB_SI_SIZE): New define.
4757         (nat_uptr_t): New an unsigned long.
4758         (nat_clock_t): Remove attribute __aligned__.
4759         (struct nat_timeval): Delete.
4760         (nat_siginfo_t): Remove attribute __aligned__.
4761         (ptrace_siginfo_t): Define.
4762         (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
4763         (compat_x32_siginfo_from_siginfo)
4764         (siginfo_from_compat_x32_siginfo): Make 'from' parameter const.
4765         Convert through a ptrace_siginfo_t instead of a nat_siginfo_t.
4766         Remove casts.
4767         (amd64_linux_siginfo_fixup_common): Rename 'native' parameter to
4768         'ptrace'.  Remove static assertions.
4769         (top level): New static assertions.
4770
4771 2016-07-25  Simon Marchi  <simon.marchi@ericsson.com>
4772
4773         * top.h (make_delete_ui_cleanup): New declaration.
4774         * top.c (delete_ui_cleanup): New function.
4775         (make_delete_ui_cleanup): New function.
4776         (new_ui_command): Create restore_ui cleanup earlier, create a
4777         delete_ui cleanup and discard it on success.
4778
4779 2016-07-25  Pedro Alves  <palves@redhat.com>
4780             Jan Kratochvil  <jan.kratochvil@redhat.com>
4781
4782         * nat/linux-procfs.c (parse_proc_status_state): Handle lowercase
4783         't'.
4784
4785 2016-07-25  Pedro Alves  <palves@redhat.com>
4786
4787         * nat/linux-procfs.c (enum proc_state): New enum.
4788         (parse_proc_status_state): New function.
4789         (linux_proc_pid_get_state): Replace output string buffer parameter
4790         with an output proc_state parameter.  Use parse_proc_status_state.
4791         (linux_proc_pid_is_gone): Adjust to use proc_state values.
4792         (linux_proc_pid_has_state): Change type of 'state' parameter; now
4793         an enum proc_state.  Adjust to linux_proc_pid_get_state interface
4794         change.
4795         (linux_proc_pid_is_stopped)
4796         (linux_proc_pid_is_trace_stopped_nowarn)
4797         (linux_proc_pid_is_zombie_maybe_warn): Adjust to
4798         linux_proc_pid_get_state interface change.
4799
4800 2016-07-25  Tim Wiederhake  <tim.wiederhake@intel.com>
4801
4802         * MAINTAINERS (Write After Approval): Add Tim Wiederhake
4803
4804 2016-07-25  Tim Wiederhake  <tim.wiederhake@intel.com>
4805
4806         * NEWS: Resume btrace on reconnect.
4807         * record-btrace.c: Added record-btrace.h include.
4808         (record_btrace_open): Split into this and ...
4809         (record_btrace_push_target): ... this.
4810         (record_btrace_disconnect): New function.
4811         (init_record_btrace_ops): Use record_btrace_disconnect.
4812         * record-btrace.h: New file.
4813         * remote.c: Added record-btrace.h include.
4814         (remote_start_remote): Check recording status.
4815         (remote_btrace_maybe_reopen): New function.
4816
4817 2016-07-23  Gabriel Krisman Bertazi  <gabriel@krisman.be>
4818
4819         * xml-syscall.c (get_syscalls_by_group): New.
4820         (get_syscall_group_names): New.
4821         (struct syscall_group_desc): New structure to store group data.
4822         (struct syscalls_info): Include field to store the group list.
4823         (sysinfo_free_syscall_group_desc): New.
4824         (free_syscalls_info): Free group list.
4825         (syscall_group_create_syscall_group_desc): New.
4826         (syscall_group_add_syscall): New.
4827         (syscall_create_syscall_desc): Add syscall to its groups.
4828         (syscall_start_syscall): Load group attribute.
4829         (syscall_group_get_group_by_name): New.
4830         (xml_list_syscalls_by_group): New.
4831         (xml_list_of_groups): New.
4832         * xml-syscall.h (get_syscalls_by_group): Export function
4833         to retrieve a list of syscalls filtered by the group name.
4834         (get_syscall_group_names): Export function to retrieve the list
4835         of syscall groups.
4836         * break-catch-syscall.c (catch_syscall_split_args): Verify if
4837         argument is a syscall group and expand it to a list of syscalls
4838         when creating catchpoints.
4839         (catch_syscall_completer): Add word completion for system call
4840         groups.
4841         * configure.ac: Include dependency for xsltproc when building
4842         in maintainer-mode.
4843         * break-catch-syscall.c (_initialize_breakpoint): Update catch
4844         syscall command documentation.
4845         * NEWS: Include section about catching groups of syscalls.
4846         * configure: Regenerate.
4847         * data-directory/Makefile.in: Generate syscall xml when building
4848         in maintainer mode.
4849         * syscalls/gdb-syscalls.dtd: Include group attribute to the
4850         syscall element.
4851         * syscalls/apply-defaults.xsl: New.
4852         * syscalls/linux-defaults.xml.in: New.
4853         * syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in.
4854         * syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in.
4855         * syscalls/arm-linux.xml: Rename to arm-linux.xml.in.
4856         * syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in.
4857         * syscalls/i386-linux.xml: Rename to i386-linux.xml.in.
4858         * syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in.
4859         * syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in.
4860         * syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in.
4861         * syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in.
4862         * syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in.
4863         * syscalls/s390-linux.xml: Rename to s390-linux.xml.in.
4864         * syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in.
4865         * syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in.
4866         * syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in.
4867         * syscalls/aarch64-linux.xml: Regenerate.
4868         * syscalls/amd64-linux.xml: Regenerate.
4869         * syscalls/arm-linux.xml: Regenerate.
4870         * syscalls/i386-linux.xml: Regenerate.
4871         * syscalls/mips-n32-linux.xml: Regenerate.
4872         * syscalls/mips-n64-linux.xml: Regenerate.
4873         * syscalls/mips-o32-linux.xml: Regenerate.
4874         * syscalls/ppc-linux.xml: Regenerate.
4875         * syscalls/ppc64-linux.xml: Regenerate.
4876         * syscalls/s390-linux.xml: Regenerate.
4877         * syscalls/s390x-linux.xml: Regenerate.
4878         * syscalls/sparc-linux.xml: Regenerate.
4879         * syscalls/sparc64-linux.xml: Regenerate.
4880
4881 2016-07-23  Andrew Pinski  <apinski@cavium.com>
4882
4883         * nat/aarch64-linux-hw-point.c
4884         (aarch64_linux_get_debug_reg_capacity): Handle
4885         ARMv8.1 and ARMv8.2 debug versions.
4886         * nat/aarch64-linux-hw-point.h
4887         (AARCH64_DEBUG_ARCH_V8_1): New define.
4888         (AARCH64_DEBUG_ARCH_V8_2): New define.
4889
4890 2016-06-30  Руслан Ижбулатов  <lrn1986@gmail.com>
4891
4892         PR gdb/14529
4893         * windows-nat.c (signal_event_command): New command 'signal-event'
4894         for W32 JIT debug support.
4895         * NEWS: Add an entry about the new 'signal-event' command.
4896
4897 2016-07-22  Tom Tromey  <tom@tromey.com>
4898
4899         PR rust/20162:
4900         * dwarf2read.c (scan_partial_symbols) <DW_TAG_structure_type>:
4901         Call scan_partial_symbols for children when reading a Rust CU.
4902         (dwarf2_physname): Ignore invalid DW_AT_linkage_name generated by
4903         rustc.
4904         (process_structure_scope) <DW_TAG_subprogram>: Call
4905         read_func_scope for Rust.
4906
4907 2016-07-22  Yao Qi  <yao.qi@linaro.org>
4908
4909         * ctf.c (ctf_traceframe_info): Call bt_ctf_get_uint64 rather than
4910         bt_ctf_get_int64.
4911
4912 2016-07-21  Tom Tromey  <tom@tromey.com>
4913
4914         * rust-lang.c (rust_tuple_struct_type_p): Return false for empty
4915         structs.
4916         * rust-exp.y (struct_expr_list): Allow empty elements.
4917
4918 2016-07-21  Tom Tromey  <tom@tromey.com>
4919
4920         * configure: Rebuild.
4921         * warning.m4 (AM_GDB_WARNINGS) <build_warnings>: Add
4922         -Wunused-but-set-parameter, -Wunused-but-set-variable.
4923
4924 2016-07-21  Pedro Alves  <palves@redhat.com>
4925
4926         * go32-nat.c (go32_create_inferior): Add cast.
4927         * ser-go32.c (dos_noop): Delete.
4928         (dos_flush_output, dos_setparity, dos_drain_output): New
4929         functions.
4930         (dos_write): Add cast.
4931         (dos_ops): Use dos_flush_output, dos_setparity and
4932         dos_drain_output.
4933         * top.c (do_chdir_cleanup): Add cast.
4934
4935 2016-07-21  Pedro Alves  <palves@redhat.com>
4936
4937         * windows-nat.c (handle_exception): Remove "th".
4938
4939 2016-07-21  Pedro Alves  <palves@redhat.com>
4940
4941         * varobj.c (varobj_value_get_print_value): Move "gdbarch" to block
4942         scope that uses it.
4943
4944 2016-07-20  John Baldwin  <jhb@FreeBSD.org>
4945
4946         * fbsd-nat.c (fbsd_enable_proc_events): Enable "PTRACE_VFORK"
4947         events.
4948         (fbsd_pending_vfork_done): Only define if "PTRACE_VFORK" is not
4949         defined.
4950         (fbsd_add_vfork_done): Likewise.
4951         (fbsd_is_vfork_done_pending): Likewise.
4952         (fbsd_next_vfork_done): Likewise.
4953         (fbsd_resume): Only ignore pending vfork done events if
4954         "PTRACE_VFORK" is not defined.
4955         (fbsd_wait): Only look for pending vfork done events if
4956         "PTRACE_VFORK" is not defined.
4957         [PTRACE_VFORK]: Handle "PL_FLAG_VFORKED" and "PL_FLAG_VFORK_DONE"
4958         events.
4959         (fbsd_follow_fork): Only fake a vfork done event if "PTRACE_VFORK"
4960         is not defined.
4961
4962 2016-07-20  John Baldwin  <jhb@FreeBSD.org>
4963
4964         * fbsd-nat.c (fbsd_wait): Use "fbsd_enable_proc_events" on
4965         new child processes.
4966
4967 2016-07-20  John Baldwin  <jhb@FreeBSD.org>
4968
4969         * fbsd-nat.c (fbsd_enable_lwp_events): Remove function.
4970         (fbsd_enable_proc_events): New function.
4971         (fbsd_enable_follow_fork): Remove function.
4972         (fbsd_post_startup_inferior): Use "fbsd_enable_proc_events".
4973         (fbsd_post_attach): Likewise.
4974
4975 2016-07-15  John Baldwin  <jhb@FreeBSD.org>
4976
4977         * common/signals.c (gdb_signal_from_host): Handle SIGLIBRT.
4978         (do_gdb_signal_to_host): Likewise.
4979         * infrun.c (_initialize_infrun): Pass GDB_SIGNAL_LIBRT through to
4980         programs.
4981         * proc-events.c (signal_table): Add entry for SIGLIBRT.
4982
4983 2016-07-14  Tom Tromey  <tom@tromey.com>
4984
4985         * python/py-breakpoint.c (gdbpy_breakpoint_deleted): Add missing
4986         newline.
4987
4988 2016-07-14  Tom Tromey  <tom@tromey.com>
4989
4990         * mips-tdep.c (micromips_scan_prologue): Remove "frame_addr".
4991         (mips_o32_push_dummy_call): Remove "stack_used_p".
4992         * aarch64-tdep.c (aarch64_record_data_proc_imm): Remove
4993         "insn_bit28".
4994         * rust-lang.c (rust_print_type): Remove "len".
4995         * rust-exp.y (super_name): Remove "current_len".
4996         * python/py-framefilter.c (py_print_type): Remove "type".
4997         * mdebugread.c (parse_partial_symbols): Remove
4998         "past_first_source_file".
4999         <N_SO>: Remove "valu", "first_so_symnum", "prev_textlow_not_set".
5000         * m2-valprint.c (m2_print_unbounded_array): Remove
5001         "content_type".
5002         (m2_val_print): Remove "i".
5003         * linespec.c (unexpected_linespec_error): Remove "cleanup".
5004         * f-valprint.c (f_val_print): Remove "i".
5005         * elfread.c (elf_symtab_read): Remove "offset".
5006         * dwarf2-frame.c (dwarf2_fetch_cfa_info): Remove "addr_size".
5007         * jit.c (jit_dealloc_cache): Remove "i" and "frame_arch".
5008
5009 2016-07-14  Tom Tromey  <tom@tromey.com>
5010
5011         * arch-utils.c (default_skip_permanent_breakpoint): Remove
5012         "bp_insn".
5013         * disasm.c (do_assembly_only): Remove "num_displayed".
5014         * dwarf2read.c (read_abbrev_offset): Remove "length".
5015         (dwarf_decode_macro_bytes) <DW_MACINFO_vendor_ext>: Remove
5016         "constant".
5017         * m32c-tdep.c (make_regs): Remove "r2hl", "r3hl", and "intbhl".
5018         * microblaze-tdep.c (microblaze_frame_cache): Remove "func".
5019         * tracefile.c (trace_save): Remove "status".
5020
5021 2016-07-14  Tom Tromey  <tom@tromey.com>
5022
5023         * symfile.c (simple_overlay_update_1): Remove initialization
5024         of "size", and commented-out code.
5025         (simple_overlay_update): Likewise.
5026
5027 2016-07-14  Tom Tromey  <tom@tromey.com>
5028
5029         * tui/tui-winsource.c (tui_show_source_line): Use getcurx.
5030         * tui/tui-io.c (tui_puts): Use getcurx.
5031         (tui_redisplay_readline): Likewise.
5032
5033 2016-07-14  Tom Tromey  <tom@tromey.com>
5034
5035         * inflow.c (child_terminal_ours_1): Use ATTRIBUTE_UNUSED.
5036
5037 2016-07-14  Tom Tromey  <tom@tromey.com>
5038
5039         * corefile.c (reopen_exec_file): Only examine st.st_mtime if stat
5040         succeeded.
5041
5042 2016-07-13  Tom Tromey  <tom@tromey.com>
5043
5044         PR python/15620, PR python/18620:
5045         * python/py-evts.c (gdbpy_initialize_py_events): Call
5046         add_new_registry for new events.
5047         * python/py-events.h (events_object) <breakpoint_created,
5048         breakpoint_deleted, breakpoint_modified>: New fields.
5049         * python/py-breakpoint.c (gdbpy_breakpoint_created): Emit the
5050         breakpoint changed event.
5051         (gdbpy_breakpoint_deleted): Emit the breakpoint deleted event.
5052         (gdbpy_breakpoint_modified): New function.
5053         (gdbpy_initialize_breakpoints): Attach to the breakpoint modified
5054         observer.
5055
5056 2016-07-13  Tom Tromey  <tom@tromey.com>
5057
5058         PR python/17698:
5059         * NEWS: Update.
5060         * python/py-breakpoint.c (bppy_get_pending): New function.
5061         (breakpoint_object_getset): Add entry for "pending".
5062         * breakpoint.h (pending_breakpoint_p): Declare.
5063         * breakpoint.c (pending_breakpoint_p): New function.
5064
5065 2016-07-13  Tom Tromey  <tom@tromey.com>
5066
5067         * python/py-breakpoint.c (bppy_get_visibility)
5068         (gdbpy_breakpoint_created): Use user_breakpoint_p.
5069
5070 2016-07-13  Tom Tromey  <tom@tromey.com>
5071
5072         PR cli/18053:
5073         * jit.c (jit_reader_load_command): Use tilde_expand.
5074         (_initialize_jit): Fix help for jit-reader-unload.  Set completer
5075         for new commands.
5076
5077 2016-07-12  Tom Tromey  <tom@tromey.com>
5078
5079         PR python/19293:
5080         * python/lib/gdb/command/unwinders.py (do_enable_unwinder): Call
5081         gdb.invalidate_cached_frames.
5082         * python/lib/gdb/unwinder.py (register_unwinder): Call
5083         gdb.invalidate_cached_frames.
5084         * python/python.c (gdbpy_invalidate_cached_frames): New function.
5085         (python_GdbMethods): Add entry for invalidate_cached_frames.
5086
5087 2016-07-07  Walfred Tedeschi  <walfred.tedeschi@intel.com>
5088
5089         * cp-namespace.c (cp_lookup_bare_symbol): Initialize
5090         lang_this.symbol.
5091
5092 2016-07-07  Walfred Tedeschi  <walfred.tedeschi@intel.com>
5093
5094         * cp-namespace.c (cp_lookup_bare_symbol): Use language passed as
5095         parameter to look for the symbol "this".
5096
5097
5098 2016-07-06  John Baldwin  <jhb@FreeBSD.org>
5099
5100         * h8300-tdep.c (h8300_print_register): Remove extraneous parentheses.
5101
5102 2016-07-06  John Baldwin  <jhb@FreeBSD.org>
5103
5104         * ada-lang.c (ada_unpack_from_contents): Use unsigned constants with
5105         left shifts.
5106
5107 2016-07-06  John Baldwin  <jhb@FreeBSD.org>
5108
5109         * sh64-tdep.c (sh64_analyze_prologue): Set "uses_fp" when setting
5110         the MEDIA_FP_REGNUM register.
5111
5112 2016-07-06  John Baldwin  <jhb@FreeBSD.org>
5113
5114         * score-tdep.c (score7_malloc_and_get_memblock): Remove check for
5115         negative size.
5116
5117 2016-07-06  John Baldwin  <jhb@FreeBSD.org>
5118
5119         * fbsd-nat.c (fbsd_is_vfork_done_pending): Fix return type.
5120
5121 2016-07-06  Yao Qi  <yao.qi@linaro.org>
5122
5123         * arm-tdep.c (arm_vfp_cprc_sub_candidate): Don't call
5124         arm_vfp_cprc_sub_candidate for static field.
5125
5126 2016-07-06  Manish Goregaokar  <manish@mozilla.com>
5127
5128         * rust-lang.c (rust_subscript): Allow subscripting pointers.
5129
5130 2016-07-05  Jan Kratochvil  <jan.kratochvil@redhat.com>
5131
5132         * configure: Regenerate.
5133         * configure.ac (HAVE_LIBBABELTRACE): Fix pos variable dereference.
5134
5135 2016-07-01  Don Breazeal  <donb@codesourcery.com>
5136
5137         * remote.c (remote_get_memory_xfer_limit): New function.
5138         * target-delegates.c: Regenerate.
5139         * target.c (memory_xfer_partial): Call
5140         target_ops.to_get_memory_xfer_limit.
5141         * target.h (struct target_ops) <to_get_memory_xfer_limit>: New
5142         member.
5143
5144 2016-07-01  John Baldwin  <jhb@FreeBSD.org>
5145
5146         * fbsd-nat.c (struct fbsd_fork_child_info): Rename to ...
5147         (struct fbsd_fork_info): ... this.
5148         (struct fbsd_fork_info) <child>: Rename to ...
5149         (struct fbsd_fork_info) <ptid>: ... this.
5150         (fbsd_pending_children): Update type.
5151         (fbsd_remember_child): Update type and field name.
5152         (fbsd_is_child_pending): Likewise.
5153         (fbsd_pending_vfork_done): New variable.
5154         (fbsd_is_vfork_done_pending): New function.
5155         (fbsd_next_vfork_done): New function.
5156         (fbsd_resume): Don't resume processes with a pending vfork done
5157         event.
5158         (fbsd_wait): Report pending vfork done events.
5159         (fbsd_follow_fork): Delay and record a pending vfork done event
5160         for a vfork parent when detaching the child.
5161
5162 2016-07-01  John Baldwin  <jhb@FreeBSD.org>
5163
5164         * fbsd-nat.c (super_resume): Move earlier next to "super_wait".
5165         (resume_one_thread_cb): Move below fork following helper code.
5166         (resume_all_threads_cb): Likewise.
5167         (fbsd_resume): Likewise.
5168
5169 2016-07-01  John Baldwin  <jhb@FreeBSD.org>
5170
5171         * fbsd-nat.c (fbsd_follow_fork): Only detach child if
5172         "detach_fork" is true.
5173
5174 2016-07-01  John Baldwin  <jhb@FreeBSD.org>
5175
5176         * x86bsd-nat.c: Include 'gdbthread.h'.
5177         (x86bsd_dr_set): Set debug registers on all threads belonging to
5178         the current inferior.
5179
5180 2016-07-01  John Baldwin  <jhb@FreeBSD.org>
5181
5182         * Makefile.in [HFILES_NO_SRCDIR]: Replace 'amd64bsd-nat.h' with
5183         'x86bsd-nat.h'.
5184         * amd64bsd-nat.c: Include 'x86bsd-nat.h' instead of
5185         'amd64bsd-nat.h'.
5186         (amd64bsd_xsave_len): Rename and move to x86bsd-nat.c.
5187         (amd64bsd_fetch_inferior_registers): Replace 'amd64bsd_xsave_len'
5188         with 'x86bsd_xsave_len'.
5189         (amd64bsd_store_inferior_registers): Likewise.
5190         (amd64bsd_target): Inherit from x86bsd_target.
5191         (amd64bsd_dr_get): Rename and move to x86bsd-nat.c.
5192         (amd64bsd_dr_set): Likewise.
5193         (amd64bsd_dr_set_control): Likewise.
5194         (amd64bsd_dr_set_addr): Likewise.
5195         (amd64bsd_dr_get_addr): Likewise.
5196         (amd64bsd_dr_get_status): Likewise.
5197         (amd64bsd_dr_get_control): Likewise.
5198         * amd64fbsd-nat.c: Include 'x86bsd-nat.h' instead of
5199         'amd64bsd-nat.h'.
5200         (super_mourn_inferior): Move to x86bsd-nat.c.
5201         (amd64fbsd_mourn_inferior): Rename and move to x86bsd-nat.c.
5202         (amd64fbsd_read_description): Replace 'amd64bsd_xsave_len' with
5203         'x86bsd_xsave_len'.
5204         (_initialize_amd64fbsd_nat): Remove x86 watchpoint setup and
5205         mourn_inferior' target op.
5206         * config/i386/fbsd.mh (NATDEPFILES): Add x86bsd-nat.o.
5207         * config/i386/fbsd64.mh: Likewise.
5208         * config/i386/nbsd64.mh: Likewise.
5209         * config/i386/nbsdelf.mh: Likewise.
5210         * config/i386/obsd.mh: Likewise.
5211         * config/i386/obsd64.mh: Likewise.
5212         * i386bsd-nat.c: Include 'x86bsd-nat.h'.
5213         (i386bsd_xsave_len): Rename and move to x86bsd-nat.c.
5214         (i386bsd_fetch_inferior_registers): Replace 'i386bsd_xsave_len'
5215         with 'x86bsd_xsave_len'.
5216         (i386bsd_store_inferior_registers): Likewise.
5217         (i386bsd_target): Inherit from x86bsd_target.
5218         (i386bsd_dr_get): Rename and move to x86bsd-nat.c.
5219         (i386bsd_dr_set): Likewise.
5220         (i386bsd_dr_set_control): Likewise.
5221         (i386bsd_dr_set_addr): Likewise.
5222         (i386bsd_dr_get_addr): Likewise.
5223         (i386bsd_dr_get_status): Likewise.
5224         (i386bsd_dr_get_control): Likewise.
5225         * i386bsd-nat.h (i386bsd_xsave_len): Remove.
5226         (i386bsd_dr_set_control): Remove.
5227         (i386bsd_dr_set_addr): Remove.
5228         (i386bsd_dr_get_addr): Remove.
5229         (i386bsd_dr_get_status): Remove.
5230         (i386bsd_dr_get_control): Remove.
5231         * i386fbsd-nat.c: Include 'x86bsd-nat.h'.
5232         (i386fbsd_read_description): Replace 'i386bsd_xsave_len' with
5233         'x86bsd_xsave_len'.
5234         (_initialize_i386fbsd_nat): Remove x86 watchpoint setup and
5235         mourn_inferior' target op.
5236         * x86bsd-nat.c: New file.
5237         * x86bsd-nat.h: New file.
5238
5239 2016-07-01  Pedro Alves  <palves@redhat.com>
5240             Tom Tromey  <tom@tromey.com>
5241
5242         * jit.c (jit_reader_load_command): Call reinit_frame_cache and
5243         jit_inferior_created_hook.
5244         (jit_reader_unload_command): Call reinit_frame_cache and
5245         jit_inferior_exit_hook.
5246         * jit.c (struct jit_unwind_private) <registers>: Delete field.
5247         <regcache>: New field.
5248         (jit_unwind_reg_set_impl): Set the register's value in the
5249         regcache.  Free the passed-in gdb_reg_value.
5250         (jit_dealloc_cache): Adjust to free the regcache.
5251         (jit_frame_sniffer): Allocate a regcache instead of an array of
5252         gdb_reg_value pointers.
5253         (jit_frame_this_id): Adjust.
5254         (jit_frame_prev_register): Read raw registers off of the regcache
5255         instead of from the gdb_reg_value pointer array.  Use
5256         gdbarch_pseudo_register_read_value to read pseudo registers.
5257         * regcache.c (regcache_raw_set_cached_value): New function,
5258         factored out from ...
5259         (regcache_raw_write): ... here.
5260         * regcache.h (regcache_raw_set_cached_value): Declare.
5261
5262 2016-07-01  Pedro Alves  <palves@redhat.com>
5263             Antoine Tremblay  <antoine.tremblay@ericsson.com>
5264
5265         * inf-ptrace.c (inf_ptrace_detach_success): New function, factored
5266         out from ...
5267         (inf_ptrace_detach): ... here.
5268         * inf-ptrace.h (inf_ptrace_detach_success): New declaration.
5269         * linux-nat.c (get_pending_status): Rename to ...
5270         (get_detach_signal): ... this, and return a host signal instead of
5271         filling in a wait status.
5272         (detach_one_lwp): New function, factored out from detach_callback
5273         and adjusted to handle detaching from a zombie thread.
5274         (detach_callback): Skip the leader thread.
5275         (linux_nat_detach): No longer defer to inf_ptrace_detach to detach
5276         the leader thread, nor build a signal string to pass down.
5277         Instead, use target_announce_detach, detach_one_lwp and
5278         inf_ptrace_detach_success.
5279
5280 2016-07-01  Pedro Alves  <palves@redhat.com>
5281
5282         * breakpoint.c (breakpoint_init_inferior): Discard watchpoint
5283         locations.
5284         * infcmd.c (detach_command): Call breakpoint_init_inferior.
5285
5286 2016-07-01  Pedro Alves  <palves@redhat.com>
5287
5288         * darwin-nat.c (darwin_detach): Use target_announce_detach.
5289         * inf-ptrace.c (inf_ptrace_detach): Likewise.
5290         * nto-procfs.c (procfs_detach): Likewise.
5291         * remote.c (remote_detach_1): Likewise.
5292         * target.c (target_announce_detach): New function.
5293         * target.h (target_announce_detach): New declaration.
5294
5295 2016-06-29  Tom Tromey  <tom@tromey.com>
5296
5297         PR python/20129:
5298         * python/lib/gdb/command/frame_filters.py (_do_enable_frame_filter)
5299         (SetFrameFilterPriority._set_filter_priority): Use "frame_filter",
5300         not "name".
5301
5302 2016-06-29  Tom Tromey  <tom@tromey.com>
5303
5304         PR gdb/17210:
5305         * target.c (free_memory_read_result_vector): Take a pointer to the
5306         VEC as an argument.
5307         (read_memory_robust): Install a cleanup for "result".
5308         * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update.
5309
5310 2016-06-29  Manish Goregaokar  <manish@mozilla.com>
5311
5312         * rust-lang.c (rust_get_disr_info): Initialize saveptr to NULL.
5313
5314 2016-06-29  Manish Goregaokar  <manish@mozilla.com>
5315
5316         * rust-lang.c (rust_get_disr_info): Use strtok_r instead of strsep.
5317
5318 2016-06-28  Yao Qi  <yao.qi@linaro.org>
5319
5320         * aarch64-tdep.c (aarch64_displaced_step_b): Use int64_t for
5321         variable new_offset.
5322
5323 2016-06-27  Manish Goregaokar  <manish@mozilla.com>
5324
5325         * rust-lang.c (rust_print_type, rust_decorations): Print unit
5326         types as "()".
5327         (rust_print_type): Omit return type for functions returning unit.
5328
5329 2016-06-25  Pierre-Marie de Rodat  <derodat@adacore.com>
5330
5331         * python/py-breakpoint.c (bppy_init): Clear bppy_pending_object
5332         when there is an error during the breakpoint creation.
5333
5334 2016-06-25  Tom Tromey  <tom@tromey.com>
5335
5336         * rust-lang.c (rust_get_disr_info, rust_print_type): Fix
5337         formatting.
5338
5339 2016-06-25  Manish Goregaokar  <manish@mozilla.com>
5340
5341         PR gdb/20239
5342         * rust-lang.c (rust_get_disr_info): Correctly interpret
5343         NonZero-optimized enums of arbitrary depth.
5344         (rust_print_type): Correctly print NonZero-optimized
5345         enums.
5346
5347 2016-06-24  David Taylor  <dtaylor@emc.com>
5348
5349         PR gdb/17520 Structure offset wrong when 1/4 GB or greater.
5350         * c-lang.h: Change all parameters, variables, and struct or union
5351         members used as struct or union fie3ld offsets from int to
5352         LONGEST.
5353         * c-valprint.c: Likewise.
5354         * cp-abi.c: Likewise.
5355         * cp-abi.h: Likewise.
5356         * cp-valprint.c: Likewise.
5357         * d-valprint.c: Likewise.
5358         * dwarf2loc.c: Likewise.
5359         * eval.c: Likewise.
5360         * extension-priv.h: Likewise.
5361         * extension.c: Likewise.
5362         * extension.h: Likewise.
5363         * findvar.c: Likewise.
5364         * gdbtypes.h: Likewise.
5365         * gnu-v2-abi.c: Likewise.
5366         * gnu-v3-abi.c: Likewise.
5367         * go-valprint.c: Likewise.
5368         * guile/guile-internal.h: Likewise.
5369         * guile/scm-pretty-print.c: Likewise.
5370         * jv-valprint.c Likewise.
5371         * opencl-lang.c: Likewise.
5372         * p-lang.h: Likewise.
5373         * python/py-prettyprint.c: Likewise.
5374         * python/python-internal.h: Likewise.
5375         * spu-tdep.c: Likewise.
5376         * typeprint.c: Likewise.
5377         * valarith.c: Likewise.
5378         * valops.c: Likewise.
5379         * valprint.c: Likewise.
5380         * valprint.h: Likewise.
5381         * value.c: Likewise.
5382         * value.h: Likewise.
5383         * p-valprint.c: Likewise.
5384         * c-typeprint.c (c_type_print_base): When printing offset, use
5385         plongest, not %d.
5386         * gdbtypes.c (recursive_dump_type): Ditto.
5387
5388 2016-06-24  David Taylor  <david.taylor@emc.com>
5389
5390         * MAINTAINERS (Write After Approval): Add David Taylor.
5391
5392 2016-06-24  John Baldwin  <jhb@FreeBSD.org>
5393
5394         * configure.ac: Check for support for system call LWP fields on
5395         FreeBSD.
5396         * config.in, configure: Rebuild.
5397         * data-directory/Makefile.in (SYSCALLS_FILES): Add freebsd.xml.
5398         * fbsd-nat.c (fbsd_wait) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
5399         Report system call events.
5400         [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]
5401         (fbsd_set_syscall_catchpoint): New function.
5402         (fbsd_nat_add_target) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
5403         Set "to_set_syscall_catchpoint" to "fbsd_set_syscall_catchpoint".
5404         * fbsd-tdep.c: Include xml-syscall.h
5405         (fbsd_get_syscall_number): New function.
5406         (fbsd_init_abi): Set XML system call file name.
5407         Add "get_syscall_number" gdbarch method.
5408         * syscalls/freebsd.xml: New file.
5409
5410 2016-06-24  John Baldwin  <jhb@FreeBSD.org>
5411
5412         * fbsd-tdep.c: Include "auxv.h".
5413         (fbsd_print_auxv_entry): New function.
5414         (fbsd_init_abi): Install gdbarch "print_auxv_entry" method.
5415
5416 2016-06-24  John Baldwin  <jhb@FreeBSD.org>
5417
5418         * auxv.c (fprint_auxv_entry): New function.
5419         (default_print_auxv_entry): New function.
5420         (fprint_target_auxv): Use gdbarch_print_auxv_entry.
5421         * auxv.h (enum auxv_format): New enum.
5422         (fprint_auxv_entry): Declare.
5423         (default_print_auxv_entry): Declare.
5424         * gdbarch.sh (print_auxv_entry): New.
5425         * gdbarch.c, gdbarch.h: Re-generated.
5426
5427 2016-06-24  John Baldwin  <jhb@FreeBSD.org>
5428
5429         * fbsd-nat.c [KERN_PROC_AUXV] New variable super_xfer_partial.
5430         (fbsd_xfer_partial): New function.
5431         (fbsd_nat_add_target) [KERN_PROC_AUXV] Set "to_xfer_partial" to
5432         "fbsd_xfer_partial".
5433
5434 2016-06-23  Tom Tromey  <tom@tromey.com>
5435
5436         * symtab.c (symbol_find_demangled_name): Loop over languages and
5437         use language_sniff_from_mangled_name.
5438         * rust-lang.c (rust_sniff_from_mangled_name): New function.
5439         (rust_language_defn): Update.
5440         * p-lang.c (pascal_language_defn): Update.
5441         * opencl-lang.c (opencl_language_defn): Update.
5442         * objc-lang.c (objc_sniff_from_mangled_name): New function.
5443         (objc_language_defn): Update.
5444         * m2-lang.c (m2_language_defn): Update.
5445         * language.h (struct language_defn) <la_sniff_from_mangled_name>: New
5446         field.
5447         (language_sniff_from_mangled_name): Declare.
5448         * language.c (language_sniff_from_mangled_name): New function.
5449         (unknown_language_defn, auto_language_defn, local_language_defn):
5450         Update.
5451         * jv-lang.c (java_sniff_from_mangled_name): New function.
5452         (java_language_defn): Use it.
5453         * go-lang.c (go_sniff_from_mangled_name): New function.
5454         (go_language_defn): Use it.
5455         * f-lang.c (f_language_defn): Update.
5456         * defs.h (enum language): Reorder.
5457         * d-lang.c (d_sniff_from_mangled_name): New function.
5458         (d_language_defn): Use it.
5459         * cp-support.h (gdb_sniff_from_mangled_name): Declare.
5460         * cp-support.c (gdb_sniff_from_mangled_name): New function.
5461         * c-lang.c (c_language_defn, cplus_language_defn)
5462         (asm_language_defn, minimal_language_defn): Update.
5463         * ada-lang.c (ada_sniff_from_mangled_name): New function.
5464         (ada_language_defn): Use it.
5465
5466 2016-06-23  Tom Tromey  <tom@tromey.com>
5467
5468         * ada-lang.c (ada_extensions): New array.
5469         (ada_language_defn): Use it.
5470         * c-lang.c (c_extensions): New array.
5471         (c_language_defn): Use it.
5472         (cplus_extensions): New array.
5473         (cplus_language_defn): Use it.
5474         (asm_extensions): New array.
5475         (asm_language_defn): Use it.
5476         (minimal_language_defn): Update.
5477         * d-lang.c (d_extensions): New array.
5478         (d_language_defn): Use it.
5479         * f-lang.c (f_extensions): New array.
5480         (f_language_defn): Use it.
5481         * go-lang.c (go_language_defn): Update.
5482         * jv-lang.c (java_extensions): New array.
5483         (java_language_defn): Use it.
5484         * language.c (add_language): Call add_filename_language.
5485         (unknown_language_defn, auto_language_defn, local_language_defn):
5486         Update.
5487         * language.h (struct language_defn) <la_filename_extensions>: New
5488         field.
5489         * m2-lang.c (m2_language_defn): Update.
5490         * objc-lang.c (objc_extensions): New array.
5491         (objc_language_defn): Use it.
5492         * opencl-lang.c (opencl_language_defn): Update.
5493         * p-lang.c (p_extensions): New array.
5494         (pascal_language_defn): Use it.
5495         * rust-lang.c (rust_extensions): New array.
5496         (rust_language_defn): Use it.
5497         * symfile.c (add_filename_language): No longer static.  Make "ext"
5498         const.
5499         (init_filename_language_table): Remove.
5500         (_initialize_symfile): Update.
5501         * symfile.h (add_filename_language): Declare.
5502
5503 2016-06-23  Tom Tromey  <tom@tromey.com>
5504
5505         * symfile.c (filename_language_table): Now a VEC.
5506         (fl_table_size, fl_table_next): Remove.
5507         (add_filename_language): Use VEC_safe_push.
5508         (set_ext_lang_command, info_ext_lang_command)
5509         (deduce_language_from_filename): Use VEC_iterate.
5510         (init_filename_language_table): Use VEC_empty.
5511
5512 2016-06-23  Tom Tromey  <tom@tromey.com>
5513
5514         * python/python.c (gdbpy_parameter): Now static.
5515         * python/python-internal.h (gdbpy_parameter): Don't declare.
5516
5517 2016-06-23  Tom Tromey  <tom@tromey.com>
5518
5519         PR gdb/16483:
5520         * python/lib/gdb/command/frame_filters.py
5521         (InfoFrameFilter.list_frame_filters): Rename to print_list.  Print
5522         nothing if no filters found.  Return value indicating whether
5523         filters were printed.
5524         (InfoFrameFilter.print_list): Remove.
5525         (InfoFrameFilter.invoke): Print message if no frame filters
5526         found.
5527
5528 2016-06-21  Walfred Tedeschi  <walfred.tedeschi@intel.com>
5529
5530         * f-valprint.c (f_val_print): Add field names for printing
5531         derived types fields.
5532
5533 2016-06-21  Andreas Arnez  <arnez@linux.vnet.ibm.com>
5534
5535         * s390-linux-tdep.c (s390_iterate_over_regset_sections): Fix typo
5536         in name of last-break regset.
5537
5538 2016-06-21  Pedro Alves  <palves@redhat.com>
5539
5540         * fork-child.c (fork_inferior): Switch the child to the main UI
5541         right after vfork.  Save/restore the current UI in the parent.
5542         Flush outputs of the main UI instead of the current UI.
5543
5544 2016-06-21  Pedro Alves  <palves@redhat.com>
5545
5546         * breakpoint.c (watchpoint_check): Send watchpoint-deleted output
5547         to all UIs.
5548
5549 2016-06-21  Pedro Alves  <palves@redhat.com>
5550
5551         * NEWS: Mention support for running interpreters on separate
5552         UIs and the new new-ui command.
5553
5554 2016-06-21  Pedro Alves  <palves@redhat.com>
5555
5556         * interps.c (set_top_level_interpreter): New function, factored
5557         out from captured_main.
5558         (interpreter_completer): Make extern.
5559         * interps.h (set_top_level_interpreter, interpreter_completer):
5560         New declarations.
5561         (captured_main): Use set_top_level_interpreter.
5562         * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0.
5563         (open_terminal_stream, new_ui_command): New functions.
5564         (init_main): Install the "new-ui" command.
5565
5566 2016-06-21  Pedro Alves  <palves@redhat.com>
5567
5568         * cli/cli-script.c (read_next_line): Adjust to per-UI stdin.
5569         (read_command_lines): Use input_interactive_p instead of
5570         input_from_terminal_p.
5571         * defs.h (struct ui): Forward declare.
5572         (input_from_terminal_p): Rename to ...
5573         (input_interactive_p): ... this.
5574         * event-top.c (stdin_event_handler): Pass 0 as from_tty argument
5575         to quit_command.
5576         (command_handler): Adjust to per-UI stdin.
5577         (handle_line_of_input): Adjust to per-UI stdin and use
5578         input_interactive_p instead of ISATTY and input_from_terminal_p.
5579         (gdb_readline_no_editing_callback): Adjust to per-UI stdin.
5580         (command_line_handler): Always pass true as "from_tty" parameter
5581         of handle_line_of_input and execute_command.
5582         (async_sigterm_handler): Pass 0 as from_tty argument to
5583         quit_command.
5584         * inflow.c (interactive_mode, show_interactive_mode): Moved to ...
5585         (gdb_has_a_terminal): Don't check interactive_mode here.
5586         (_initialize_inflow): Don't install "set interactive-mode" here.
5587         * main.c (captured_command_loop): Adjust to per-UI stdin.
5588         * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI
5589         stdin.
5590         * top.c (new_ui): Save the stdin stream and whether it's a tty.
5591         (dont_repeat): Adjust to per-UI stdin.
5592         (command_line_input): Adjust to per-UI stdin and to use
5593         input_interactive_p.
5594         (quit_force): Write history if any UI supports interactive input.
5595         (interactive_mode, show_interactive_mode): Move here, from
5596         inflow.c.
5597         (input_from_terminal_p): Rename to ...
5598         (input_interactive_p): ... this, and check the "interactive_mode"
5599         global instead of calling gdb_has_a_terminal.
5600         (_initialize_top): Install "set interactive-mode" here.
5601         * top.h (struct ui) <stdin_stream, input_interactive_p>: New
5602         fields.
5603         * utils.c (quit): Pass 0 as from_tty argument to quit_force.
5604         (defaulted_query): Adjust to per-UI stdin and to use
5605         input_interactive_p.
5606
5607 2016-06-21  Pedro Alves  <palves@redhat.com>
5608
5609         * event-top.c (stdin_event_handler): Don't quit gdb if it was a
5610         secondary UI's input stream that closed.  Instead, just delete the
5611         UI.
5612
5613 2016-06-21  Pedro Alves  <palves@redhat.com>
5614
5615         * event-top.c (main_ui_): Delete.
5616         (main_ui, current_ui, ui_list): No longer initialize here.
5617         * main.c (captured_main): UI initialization code factored out to
5618         new new_ui function.
5619         (gdb_main): Wrap captured_main with TRY/CATCH instead of
5620         catch_errors.
5621         * top.c (highest_ui_num): New global.
5622         (new_ui): New function.
5623         * top.h (struct ui) <num>: New field.
5624         (new_ui): New declaration.
5625
5626 2016-06-21  Pedro Alves  <palves@redhat.com>
5627
5628         * cli/cli-interp.c (cli_on_normal_stop): Bail out early if there's
5629         nothing to print.  Use should_print_stop_to_console.
5630         * tui/tui-interp.c (tui_on_normal_stop): Likewise.
5631
5632 2016-06-21  Pedro Alves  <palves@redhat.com>
5633
5634         * breakpoint.c (new_until_break_fsm): Add 'cmd_interp' parameter.
5635         (until_break_fsm_should_stop, until_break_fsm_clean_up): Add
5636         thread parameter.
5637         (until_break_command): Pass command interpreter to thread fsm
5638         ctor.
5639         * cli/cli-interp.c (should_print_stop_to_console): Adjust.
5640         * gdbthread.h (struct thread_control_state) <command_interp>:
5641         Delete field.
5642         * infcall.c (new_call_thread_fsm): Add 'cmd_interp' parameter.
5643         Pass it down.
5644         (call_thread_fsm_should_stop): Add thread parameter.
5645         (call_function_by_hand_dummy): Pass command interpreter to thread
5646         fsm ctor.  Pass thread pointer to fsm clean up method.
5647         * infcmd.c: Include interps.h.
5648         (struct step_command_fsm) <thread>: Delete field.
5649         (new_step_command_fsm): Add 'cmd_interp' parameter.  Pass it down.
5650         (step_command_fsm_prepare): Remove references to fsm's thread
5651         field.
5652         (step_1): Pass command interpreter to thread
5653         fsm ctor.  Pass thread pointer to fsm clean up method.
5654         (step_command_fsm_should_stop, step_command_fsm_clean_up): Add
5655         thread parameter and use it.
5656         (new_until_next_fsm): Add 'cmd_interp' parameter.  Pass it down.
5657         (until_next_fsm_should_stop, until_next_fsm_clean_up): Add thread
5658         parameter and use it.
5659         (until_next_command): Pass command interpreter to thread fsm ctor.
5660         (struct finish_command_fsm) <thread>: Delete field.
5661         (finish_command_fsm_ops): Add NULL slot for should_notify_stop.
5662         (new_finish_command_fsm): Add 'cmd_interp' parameter and pass it
5663         down.  Remove thread parameter and adjust.
5664         (finish_command_fsm_should_stop, finish_command_fsm_clean_up): Add
5665         thread parameter and use it.
5666         (finish_command): Pass command interpreter to thread fsm ctor.
5667         Don't pass thread.
5668         * infrun.c (follow_fork): Move thread fsm to child fork instead of
5669         command interpreter, only.
5670         (clear_proceed_status_thread): Remove reference to command_interp.
5671         (proceed): Don't record the thread's command interpreter.
5672         (clean_up_just_stopped_threads_fsms): Pass thread to fsm clean_up
5673         method.
5674         (fetch_inferior_event): Pass thread to fsm should_stop method.
5675         * thread-fsm.c (thread_fsm_ctor): Add 'cmd_interp' parameter.
5676         Store it.
5677         (thread_fsm_clean_up, thread_fsm_should_stop): Add thread
5678         parameter and pass it down.
5679         * thread-fsm.h (struct thread_fsm) <command_interp>: New field.
5680         (struct thread_fsm_ops) <clean_up, should_stop>: Add thread
5681         parameter.
5682         (thread_fsm_ctor): Add 'cmd_interp' parameter.
5683         (thread_fsm_clean_up, thread_fsm_should_stop): Add thread
5684         parameter.
5685         * thread.c (thread_cancel_execution_command): Pass thread to
5686         thread fsm clean_up method.
5687
5688 2016-06-21  Pedro Alves  <palves@redhat.com>
5689
5690         * cli/cli-interp.c: Include gdbthread.h and thread-fsm.h.
5691         (should_print_stop_to_console): New function, factored out from
5692         mi_on_normal_stop_1.
5693         * cli/cli-interp.h (should_print_stop_to_console): Declare.
5694         * mi/mi-interp.c (mi_on_normal_stop_1): Use
5695         should_print_stop_to_console.  Pass it the current UI's console
5696         interpreter.
5697         * mi/mi-main.c (captured_mi_execute_command): Use the
5698         INTERP_CONSOLE symbol rather than explicit "console".
5699
5700 2016-06-21  Pedro Alves  <palves@redhat.com>
5701
5702         * infcmd.c (prepare_execution_command): Use
5703         all_uis_on_sync_execution_starting.
5704         * infrun.c (all_uis_on_sync_execution_starting): New function.
5705         * infrun.h (all_uis_on_sync_execution_starting): Declare.
5706
5707 2016-06-21  Pedro Alves  <palves@redhat.com>
5708
5709         * annotate.c: Include top.h.
5710         (async_background_execution_p): Delete.
5711         (print_value_flags): Check the UI's prompt state rather then
5712         async_background_execution_p.
5713         * event-loop.c (start_event_loop): Set the prompt state to
5714         PROMPT_NEEDED.
5715         * event-top.c (display_gdb_prompt, async_enable_stdin)
5716         (async_disable_stdin): Check the current UI's prompt state instead
5717         of the sync_execution global.
5718         (command_line_handler): Set the prompt state to PROMPT_NEEDED
5719         before running a command, and display the prompt if still needed
5720         afterwards.
5721         * infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
5722         (new_call_thread_fsm): New parameter 'waiting_ui'.  Store it.
5723         (call_thread_fsm_should_stop): Set the prompt state to
5724         PROMPT_NEEDED.
5725         (run_inferior_call): Adjust to temporarily set the prompt state to
5726         PROMPT_BLOCKED instead of using the sync_execution global.
5727         (call_function_by_hand_dummy): Pass the current UI to
5728         new_call_thread_fsm.
5729         * infcmd.c: Include top.h.
5730         (continue_1): Check the current UI's prompt state instead of the
5731         sync_execution global.
5732         (continue_command): Validate global execution state before calling
5733         prepare_execution_command.
5734         (step_1): Call all_uis_check_sync_execution_done.
5735         (attach_post_wait): Don't call async_enable_stdin here.  Remove
5736         reference to sync_execution.
5737         * infrun.c (sync_execution): Delete global.
5738         (follow_fork_inferior)
5739         (reinstall_readline_callback_handler_cleanup): Check the current
5740         UI's prompt state instead of the sync_execution global.
5741         (check_curr_ui_sync_execution_done)
5742         (all_uis_check_sync_execution_done): New functions.
5743         (fetch_inferior_event): Call all_uis_check_sync_execution_done
5744         instead of trying to determine whether the global sync execution
5745         changed.
5746         (handle_no_resumed): Check the prompt state of all UIs.
5747         (normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
5748         UIs.  Emit the "Switching to" notification to all UIs.  Enable
5749         stdin in all UIs.
5750         * infrun.h (sync_execution): Delete.
5751         (all_uis_check_sync_execution_done): Declare.
5752         * main.c (captured_command_loop): Don't call
5753         interp_pre_command_loop if the prompt is blocked.
5754         (catch_command_errors, catch_command_errors_const): Adjust.
5755         (captured_main): Set the initial prompt state to PROMPT_NEEDED.
5756         * mi/mi-interp.c (display_mi_prompt): Set the prompt state to
5757         PROMPTED.
5758         (mi_interpreter_resume): Don't clear sync_execution.  Remove hack
5759         comment.
5760         (mi_execute_command_input_handler): Set the prompt state to
5761         PROMPT_NEEDED before executing the command, and only display the
5762         prompt if the prompt state is PROMPT_NEEDED afterwards.
5763         (mi_on_resume_1): Adjust to check the prompt state.
5764         * target.c (target_terminal_inferior): Adjust to check the prompt
5765         state.
5766         * top.c (wait_sync_command_done, maybe_wait_sync_command_done)
5767         (execute_command): Check the current UI's prompt state instead of
5768         sync_execution.
5769         * top.h (enum prompt_state): New.
5770         (struct ui) <prompt_state>: New field.
5771         (ALL_UIS): New macro.
5772
5773 2016-06-21  Pedro Alves  <palves@redhat.com>
5774
5775         * top.c (gdb_secondary_prompt_depth): Delete.
5776         (gdb_in_secondary_prompt_p): Add ui parameter.  Use it.
5777         (gdb_readline_wrapper_cleanup, gdb_readline_wrapper): Adjust to
5778         per-UI gdb_secondary_prompt_depth.
5779         * top.h (struct ui) <secondary_prompt_depth>: New field.
5780
5781 2016-06-21  Pedro Alves  <palves@redhat.com>
5782
5783         * cli/cli-interp.c (cli_interpreter_pre_command_loop): New
5784         function.
5785         (cli_interp_procs): Install it instead of cli_command_loop.
5786         * cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare.
5787         * event-top.c (cli_command_loop): Delete.
5788         * interps.c (interp_new): Remove reference to command_loop_proc.
5789         (current_interp_command_loop): Delete.
5790         (interp_pre_command_loop): New function.
5791         (interp_command_loop_ftype): Delete.
5792         * interps.h (interp_pre_command_loop_ftype): New typedef.
5793         (struct interp_procs) <command_loop_proc>: Delele field.
5794         <pre_command_loop_proc>: New field.
5795         (current_interp_command_loop): Delete declaration.
5796         (interp_pre_command_loop): New declaration.
5797         * main.c (captured_command_loop): Call interp_pre_command_loop
5798         instead of current_interp_command_loop and start an event loop.
5799         * mi/mi-interp.c (mi_command_loop): Delete.
5800         (mi_interpreter_pre_command_loop): New.
5801         (mi_interp_procs): Update.
5802         * tui/tui-interp.c (tui_interp_procs): Install
5803         cli_interpreter_pre_command_loop instead of cli_command_loop.
5804
5805 2016-06-21  Pedro Alves  <palves@redhat.com>
5806
5807         * interps.c (current_interpreter): New function.
5808         * interps.h (current_interpreter): New declaration.
5809         * mi/mi-cmds.h (raw_stdout): Delete declaration.
5810         * mi/mi-common.h (struct mi_interp) <raw_stdout,
5811         saved_raw_stdout>: New field.
5812         * mi/mi-interp.c (display_mi_prompt): New parameter 'mi'.  Adjust
5813         to per-UI raw_stdout.
5814         (mi_interpreter_init): Adjust to per-UI raw_stdout.
5815         (mi_on_sync_execution_done, mi_execute_command_input_handler)
5816         (mi_command_loop): Pass MI instance to display_mi_prompt.
5817         (mi_on_normal_stop_1, mi_output_running_pid, mi_on_resume_1)
5818         (mi_on_resume): Adjust to per-UI raw_stdout.
5819         (saved_raw_stdout): Delete.
5820         (mi_set_logging): Adjust to per-UI raw_stdout and
5821         saved_raw_stdout.
5822         * mi/mi-main.c (raw_stdout): Delete.
5823         (mi_cmd_gdb_exit, captured_mi_execute_command)
5824         (mi_print_exception, mi_load_progress): Adjust to per-UI
5825         raw_stdout.
5826         (print_diff_now, mi_print_timing_maybe): New ui_file parameter.
5827         Pass it along.
5828         (print_diff): New ui_file parameter.  Send output there instead of
5829         raw_stdout.
5830         * mi/mi-main.h (struct ui_file): Forward declare.
5831         (mi_print_timing_maybe): Add ui_file parameter.
5832
5833 2016-06-21  Pedro Alves  <palves@redhat.com>
5834
5835         * mi/mi-interp.c (display_mi_prompt): New function.
5836
5837 2016-06-21  Pedro Alves  <palves@redhat.com>
5838
5839         * target.c (target_terminal_inferior): Bail out after
5840         unregistering input_fd if not on the main UI.
5841         (target_terminal_ours): Bail out after registering input_fd if not
5842         on the main UI.
5843         (target_terminal_ours_for_output): Bail out if not on the main UI.
5844
5845 2016-06-21  Pedro Alves  <palves@redhat.com>
5846
5847         * event-top.c (restore_ui_cleanup): Make extern.
5848         * infrun.c (fetch_inferior_event): Always switch to the main UI.
5849         * top.h (restore_ui_cleanup): Declare.
5850
5851 2016-06-21  Pedro Alves  <palves@redhat.com>
5852
5853         PR mi/20034
5854         * cli/cli-interp.c: Include cli-interp.h and event-top.h.
5855         (cli_interpreter_resume): Pass 1 to gdb_setup_readline.  Set the
5856         UI's input_handler here.
5857         (cli_interpreter_supports_command_editing): New function.
5858         (cli_interp_procs): Install it.
5859         * cli/cli-interp.h: New file.
5860         * event-top.c (async_command_editing_p): Rename to ...
5861         (set_editing_cmd_var): ... this.
5862         (change_line_handler): Add parameter 'editing', and use it.  Bail
5863         early if the interpreter doesn't support editing.  Don't touch
5864         readline state if editing is off.
5865         (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
5866         (gdb_rl_callback_handler_reinstall): Assert the current UI is the
5867         main UI.
5868         (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if
5869         not using readline.  Check whether the current UI is using command
5870         editing instead of checking the async_command_editing_p global.
5871         (set_async_editing_command): Delete.
5872         (gdb_setup_readline): Add 'editing' parameter.  Only allow editing
5873         on the main UI.  Don't touch readline state if editing is off.
5874         (gdb_disable_readline): Don't touch readline state if editing is
5875         off.
5876         * event-top.h (gdb_setup_readline): Add 'int' parameter.
5877         (set_async_editing_command): Delete declaration.
5878         (change_line_handler, command_line_handler): Declare.
5879         (async_command_editing_p): Rename to ...
5880         (set_editing_cmd_var): ... this.
5881         * infrun.c (reinstall_readline_callback_handler_cleanup): Check
5882         whether the current UI has editing enabled rather than checking
5883         the async_command_editing_p global.
5884         * interps.c (interp_supports_command_editing): New function.
5885         * interps.h (interp_supports_command_editing_ftype): New typedef.
5886         (struct interp_procs) <supports_command_editing_proc>: New field.
5887         (interp_supports_command_editing): Declare.
5888         * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to
5889         gdb_setup_readline.  Don't clear the async_command_editing_p
5890         global.  Update comments.
5891         * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check
5892         whether the current UI has editing enabled rather than checking
5893         the async_command_editing_p global.  Don't touch readline state if
5894         editing is off.
5895         (undo_terminal_modifications_before_exit): Switch to the main UI.
5896         Unconditionally call gdb_disable_readline.
5897         (set_editing): New function.
5898         (show_async_command_editing_p): Rename to ...
5899         (show_editing): ... this.  Show the state of the current UI.
5900         (_initialize_top): Adjust.
5901         * top.h (struct ui) <command_editing>: New field.
5902         * tui/tui-interp.c: Include cli/cli-interp.h.
5903         (tui_resume): Pass 1 to gdb_setup_readline.  Set the UI's
5904         input_handler.
5905         (tui_interp_procs): Install
5906         cli_interpreter_supports_command_editing.
5907         * tui/tui-io.c (tui_getc): Check whether the current UI has
5908         editing enabled rather than checking the async_command_editing_p
5909         global.
5910
5911 2016-06-21  Pedro Alves  <palves@redhat.com>
5912
5913         * top.c: Call gen_ret_current_ui_field_ptr for current_uiout.
5914         * top.h (struct ui) <m_current_uiout>: New field.
5915         * ui-out.c (current_uiout): Delete.
5916         * ui-out.h (current_uiout): Delete.
5917         (current_ui_current_uiout_ptr): New declaration.
5918         (current_uiout): Reimplement as wrapper around
5919         current_ui_current_uiout_ptr.
5920
5921 2016-06-21  Pedro Alves  <palves@redhat.com>
5922
5923         * ui-out.c (default_ui_out_impl): Delete.
5924         (def_uiout): Delete.
5925         (current_uiout): Set to NULL.
5926         (default_table_begin, default_table_body, default_table_end)
5927         (default_table_header, default_begin, default_end)
5928         (default_field_int, default_field_skip, default_field_string)
5929         (default_field_fmt, default_spaces, default_text, default_message)
5930         (default_wrap_hint, default_flush, default_data_destroy): Delete.
5931
5932 2016-06-21  Pedro Alves  <palves@redhat.com>
5933
5934         * event-top.c (gdb_setup_readline): Pass the UI's outstream and
5935         errstream to stdout_fileopen and stderr_fileopen.
5936         * exceptions.c: Include top.h.
5937         (print_flush): Open the current UI's outstream file descriptor,
5938         instead of hardcoding file descriptor 1.
5939         * main.c (captured_main): Save the main UI's out and error
5940         streams.  Adjust stderr_fileopen call.
5941         * top.h (struct ui) <outstream, errstream>: New fields.
5942         * ui-file.c (stderr_fileopen): Add stream parameter.  Use it
5943         instead of stderr.
5944         * ui-file.h (stderr_fileopen): Add stream parameter and update
5945         comment.
5946
5947 2016-06-21  Pedro Alves  <palves@redhat.com>
5948
5949         * event-top.c (input_fd): Delete.
5950         (stdin_event_handler): Switch to the UI whose input descriptor got
5951         the event.  Adjust to per-UI input_fd.
5952         (gdb_setup_readline): Don't set the input_fd global.  Adjust to
5953         per-UI input_fd.
5954         (gdb_disable_readline): Adjust to per-UI input_fd.
5955         * event-top.h (input_fd): Delete declaration.
5956         * linux-nat.c (linux_nat_terminal_inferior): Don't remove input_fd
5957         from the event-loop here.
5958         (linux_nat_terminal_ours): Don't register input_fd in the
5959         event-loop here.
5960         * main.c (captured_main): Adjust to per-UI input_fd.
5961         * remote.c (remote_terminal_inferior): Don't remove input_fd from
5962         the event-loop here.
5963         (remote_terminal_ours): Don't register input_fd in the event-loop
5964         here.
5965         * target.c: Include top.h and event-top.h.
5966         (target_terminal_inferior): Remove input_fd from the event-loop
5967         here.
5968         (target_terminal_ours): Register input_fd in the event-loop.
5969         * top.h (struct ui) <input_fd>: New field.
5970
5971 2016-06-21  Pedro Alves  <palves@redhat.com>
5972
5973         * cli/cli-script.c (execute_user_command, read_next_line)
5974         (read_next_line): Adjust to per-UI instream.
5975         * event-top.c (stdin_event_handler, command_handler)
5976         (handle_line_of_input, command_line_handler)
5977         (gdb_readline_no_editing_callback, async_sigterm_handler)
5978         (gdb_setup_readline): Likewise.
5979         * inflow.c: Include top.h.
5980         (gdb_has_a_terminal, child_terminal_init_with_pgrp)
5981         (gdb_save_tty_state, child_terminal_inferior)
5982         (child_terminal_ours_1, copy_terminal_info): Use the main UI.
5983         (initialize_stdin_serial): Adjust to per-UI instream.
5984         * main.c (captured_command_loop, captured_main): Adjust to per-UI
5985         instream.
5986         * mi/mi-interp.c (mi_execute_command_wrapper): Likewise.
5987         * python/python.c (python_interactive_command): Likewise.
5988         * terminal.h (struct ui): Forward declare.
5989         (initialize_stdin_serial): Add struct ui parameter.
5990         * top.c (instream): Delete.
5991         (do_restore_instream_cleanup, read_command_file, dont_repeat)
5992         (gdb_readline_no_editing, command_line_input)
5993         (input_from_terminal_p, gdb_init): Adjust to per-UI instream.
5994         * top.h (struct ui) <instream>: New field.
5995         (instream): Delete declaration.
5996         (quit): Adjust to per-UI instream.
5997
5998 2016-06-21  Pedro Alves  <palves@redhat.com>
5999
6000         * event-loop.c: Include top.h.
6001         (invoke_async_signal_handlers): Switch to the main UI.
6002         * event-top.c (main_ui_): Update comment.
6003         (main_ui): New global.
6004         * top.h (main_ui): Declare.
6005
6006 2016-06-21  Pedro Alves  <palves@redhat.com>
6007
6008         * cli/cli-interp.c (cli_interp): Delete.
6009         (as_cli_interp): New function.
6010         (cli_on_normal_stop, cli_on_signal_received)
6011         (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
6012         (cli_on_no_history): Send output to all CLI UIs.
6013         (cli_on_sync_execution_done, cli_on_command_error): Skip output if
6014         the top level interpreter is not a CLI.
6015         (cli_interpreter_init): Don't set cli_interp or install observers
6016         here.
6017         (_initialize_cli_interp): Install observers here.
6018         * event-top.c (main_ui_, ui_list): New globals.
6019         (current_ui): Point to main_ui_.
6020         (restore_ui_cleanup, switch_thru_all_uis_init)
6021         (switch_thru_all_uis_cond, switch_thru_all_uis_next): New
6022         functions.
6023         * mi/mi-interp.c (as_mi_interp): New function.
6024         (mi_interpreter_init): Don't install observers here.
6025         (mi_on_sync_execution_done): Skip output if the top level
6026         interpreter is not a MI.
6027         (mi_new_thread, mi_thread_exit, mi_record_changed)
6028         (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit)
6029         (mi_inferior_removed): Send output to all MI UIs.
6030         (find_mi_interpreter, mi_interp_data): Delete.
6031         (find_mi_interp): New function.
6032         (mi_on_signal_received, mi_on_end_stepping_range)
6033         (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output
6034         to all MI UIs.
6035         (mi_on_normal_stop): Rename to ...
6036         (mi_on_normal_stop_1): ... this.
6037         (mi_on_normal_stop): Reimplement, sending output to all MI UIs.
6038         (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted)
6039         (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted)
6040         (mi_breakpoint_modified, mi_output_running_pid): Send output to
6041         all MI UIs.
6042         (mi_on_resume): Rename to ...
6043         (mi_on_resume_1): ... this.  Don't handle infcalls here.
6044         (mi_on_resume): Reimplement, sending output to all MI UIs.
6045         (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
6046         (mi_memory_changed): Send output to all MI UIs.
6047         (report_initial_inferior): Install observers here.
6048         * top.h (struct ui) <next>: New field.
6049         (ui_list): Declare.
6050         (struct switch_thru_all_uis): New.
6051         (switch_thru_all_uis_init, switch_thru_all_uis_cond)
6052         (switch_thru_all_uis_next): Declare.
6053         (SWITCH_THRU_ALL_UIS): New macro.
6054         * tui/tui-interp.c (tui_interp): Delete global.
6055         (as_tui_interp): New function.
6056         (tui_on_normal_stop, tui_on_signal_received)
6057         (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
6058         (tui_on_no_history): Send output to all TUI UIs.
6059         (tui_on_sync_execution_done, tui_on_command_error): Skip output if
6060         the top level interpreter is not a TUI.
6061         (tui_init): Don't set tui_interp or install observers here.
6062         (_initialize_tui_interp): Install observers here.
6063
6064 2016-06-21  Pedro Alves  <palves@redhat.com>
6065
6066         * cli/cli-interp.c (cli_uiout): Delete, moved into ...
6067         (struct cli_interp): ... this new structure.
6068         (cli_on_normal_stop, cli_on_signal_received)
6069         (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
6070         (cli_on_no_history): Use interp_ui_out.
6071         (cli_interpreter_init): If top level, set the cli_interp global.
6072         (cli_interpreter_init): Return the interp's data instead of NULL.
6073         (cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust
6074         to cli_uiout being in the interpreter's data.
6075         (cli_interp_procs): New, factored out from _initialize_cli_interp.
6076         (cli_interp_factory): New function.
6077         (_initialize_cli_interp): Call interp_factory_register.
6078         * interps.c (get_interp_info): New, factored out from ...
6079         (get_current_interp_info): ... this.
6080         (interp_new): Add parameter 'data'.  Store it.
6081         (struct interp_factory): New function.
6082         (interp_factory_p): New typedef.  Define a VEC_P.
6083         (interpreter_factories): New global.
6084         (interp_factory_register): New function.
6085         (interp_add): Add 'ui' parameter.  Use get_interp_info and
6086         interp_lookup_existing.
6087         (interp_lookup): Rename to ...
6088         (interp_lookup_existing): ... this.  Add 'ui' parameter.  Don't
6089         check for NULL or empty name here.
6090         (interp_lookup): Add 'ui' parameter and reimplement.
6091         (interp_set_temp, interpreter_exec_cmd): Adjust.
6092         (interpreter_completer): Complete on registered interpreter
6093         factories instead of interpreters.
6094         * interps.h (interp_factory_func): New typedef.
6095         (interp_factory_register): Declare.
6096         (interp_new, interp_add): Adjust.
6097         (interp_lookup): Declare.
6098         * main.c (captured_main): Adjust.
6099         * mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust.
6100         (mi_interp_procs): New, factored out from
6101         _initialize_mi_interp.
6102         (mi_interp_factory): New function.
6103         * python/python.c (execute_gdb_command): Adjust.
6104         * tui/tui-interp.c (tui_init): If top level, set the tui_interp
6105         global.
6106         (tui_interp_procs): New.
6107         (tui_interp_factory): New function.
6108         (_initialize_tui_interp): Call interp_factory_register.
6109
6110 2016-06-21  Pedro Alves  <palves@redhat.com>
6111
6112         * breakpoint.c (bpstat_do_actions_1): Access the current UI's
6113         async field instead of the interpreter_async global.
6114         * cli/cli-script.c (execute_user_command, while_command)
6115         (if_command, script_from_file): Likewise.
6116         * compile/compile.c: Include top.h instead of interps.h.
6117         (compile_file_command, compile_code_command)
6118         (compile_print_command): Access the current UI's async field
6119         instead of the interpreter_async global.
6120         * guile/guile.c: Include top.h instead of interps.h.
6121         (guile_repl_command, guile_command, gdbscm_execute_gdb_command):
6122         Access the current UI's async field instead of the
6123         interpreter_async global.
6124         * guile/scm-ports.c: Include top.h instead of interps.h.
6125         (ioscm_with_output_to_port_worker): Access the current UI's async
6126         field instead of the interpreter_async global.
6127         * inf-loop.c (inferior_event_handler): Likewise.
6128         * infcall.c (run_inferior_call): Likewise.
6129         * infrun.c (reinstall_readline_callback_handler_cleanup)
6130         (fetch_inferior_event): Likewise.
6131         * interps.c (interpreter_async): Delete.
6132         (struct ui_interp_info): New.
6133         (get_current_interp_info): New function.
6134         (interp_list, current_interpreter, top_level_interpreter_ptr):
6135         Delete.
6136         (interp_add, interp_set, interp_lookup, interp_ui_out)
6137         (current_interp_set_logging, interp_set_temp)
6138         (current_interp_named_p): Adjust to per-UI interpreters.
6139         (command_interpreter): Delete.
6140         (command_interp, current_interp_command_loop, interp_quiet_p)
6141         (interp_exec, interpreter_exec_cmd, interpreter_completer)
6142         (top_level_interpreter, top_level_interpreter_data): Adjust to
6143         per-UI interpreters.
6144         * interps.h (interpreter_async): Delete.
6145         * main.c (captured_command_loop): Access the current UI's async
6146         field instead of the interpreter_async global.
6147         * python/python.c (python_interactive_command, python_command)
6148         (execute_gdb_command): Likewise.
6149         * top.c (maybe_wait_sync_command_done, execute_command_to_string):
6150         Access the current UI's async field instead of the
6151         interpreter_async global.
6152         * top.h (struct tl_interp_info): Forward declare.
6153         (struct ui) <interp_info, async>: New fields.
6154
6155 2016-06-21  Pedro Alves  <palves@redhat.com>
6156
6157         * main.c (gdb_stdout, gdb_stderr, gdb_stdlog, gdb_stdin): Delete
6158         globals.
6159         (gen_ret_current_ui_field_ptr): New macro.  Use it to generate
6160         wrappers for gdb_stdout, gdb_stderr, gdb_stdlog and gdb_stdin.
6161         * top.h (struct ui) <m_gdb_stdout, m_gdb_stdin, m_gdb_stderr,
6162         m_gdb_stdlog>: New fields.
6163         (current_ui_gdb_stdout_ptr, current_ui_gdb_stdin_ptr)
6164         (current_ui_gdb_stderr_ptr, current_ui_gdb_stdlog_ptr): Declare.
6165         (gdb_stdout, gdb_stdin, gdb_stderr, gdb_stdlog): Reimplement as
6166         macros.
6167
6168 2016-06-21  Pedro Alves  <palves@redhat.com>
6169
6170         * event-top.c: Update readline-related comments.
6171         (input_handler, call_readline): Delete globals.
6172         (gdb_rl_callback_handler): Call the current UI's input_handler
6173         method.
6174         (change_line_handler): Adjust to set current UI's properties
6175         instead of globals.
6176         (current_ui_, current_ui): New globals.
6177         (get_command_line_buffer): Rewrite to refer to the current UI.
6178         (stdin_event_handler): Adjust to call the call_readline method of
6179         the current UI.
6180         (gdb_readline_no_editing_callback): Adjust to call the current UI's
6181         input_handler method.
6182         (gdb_setup_readline): Adjust to set current UI's properties
6183         instead of globals.
6184         * event-top.h (call_readline, input_handler): Delete declarations.
6185         * mi/mi-interp.c (mi_interpreter_resume): Adjust to set current
6186         UI's properties instead of globals.
6187         * top.c (gdb_readline_wrapper_cleanup): Adjust to set current UI's
6188         properties instead of globals.
6189         (gdb_readline_wrapper): Adjust to call and set current UI's
6190         methods instead of globals.
6191         * top.h: Include buffer.h and event-loop.h.
6192         (struct ui): New struct.
6193         (current_ui): New declaration.
6194
6195 2016-06-21  Pedro Alves  <palves@redhat.com>
6196
6197         * ada-lang.c (ada_exception_name_addr_1): Add comment.
6198         (print_it_exception): Select the current frame.
6199
6200 2016-06-17  Yan-Ting Lin  <currygt52@gmail.com>
6201
6202         * Makefile.in (ALL_TARGET_OBS): Add nds32-tdep.o.
6203         (HFILES_NO_SRCDIR): Add nds32-tdep.h.
6204         (ALLDEPFILES): Add nds32-tdep.c.
6205         * NEWS: Mention new NDS32 port.
6206         * configure.tgt: Add NDS32.
6207         * nds32-tdep.c: New file.
6208         * nds32-tdep.h: New file.
6209         * features/Makefile (XMLTOC): Add nds32.xml.
6210         * features/nds32-core.xml: New file.
6211         * features/nds32-fpu.xml: New file.
6212         * features/nds32-system.xml: New file.
6213         * features/nds32.c: New file (generated).
6214         * features/nds32.xml: New file.
6215
6216 2016-06-14  John Baldwin  <jhb@FreeBSD.org>
6217
6218         * v850-tdep.c (v850_use_struct_convention): Trim type length checks.
6219
6220 2016-06-14  John Baldwin  <jhb@FreeBSD.org>
6221
6222         * tui/tui-stack.c (tui_show_frame_info): Fix type mismatch.
6223
6224 2016-06-14  John Baldwin  <jhb@FreeBSD.org>
6225
6226         * rs6000-tdep.c (ppc_process_record_op31): Initialize ra.
6227
6228 2016-06-13  Nick Clifton  <nickc@redhat.com>
6229
6230         * gdbtypes.c (replace_type): Fix assertion.
6231
6232 2016-06-10  Tom Tromey  <tom@tromey.com>
6233
6234         * gdbtypes.c (arch_type, arch_integer_type, arch_character_type)
6235         (arch_boolean_type, arch_float_type, arch_complex_type)
6236         (arch_flags_type, append_flags_type_field)
6237         (append_flags_type_flag, arch_composite_type)
6238         (append_composite_type_field_raw)
6239         (append_composite_type_field_aligned)
6240         (append_composite_type_field): Make "name" parameter const.
6241         * gdbtypes.h (arch_type, arch_integer_type, arch_character_type)
6242         (arch_boolean_type, arch_float_type, arch_complex_type)
6243         (append_composite_type_field, append_composite_type_field_aligned)
6244         (append_composite_type_field_raw, arch_flags_type)
6245         (append_flags_type_field, append_flags_type_flag): Constify.
6246
6247 2016-06-10  Tom Tromey  <tom@tromey.com>
6248
6249         PR rust/20110:
6250         * rust-exp.y (lex_number): Don't truncate large numbers to i32.
6251
6252 2016-06-10  Tom Tromey  <tom@tromey.com>
6253
6254         * Makefile.in (COMMON_OBS): Remove rust-exp.o.
6255         (YYFILES): Add rust-exp.c.
6256         (YYOBJ): Add rust-exp.o.
6257         (local-maintainer-clean): Remove rust-exp.c.
6258
6259 2016-06-09  Toshihito Kikuchi  <k.toshihito@yahoo.de>
6260
6261         * NEWS: Mention that GDB now supports a negative repeat count in
6262         the 'x' command.
6263         * printcmd.c (decode_format): Allow '-' in the parameter
6264         "string_ptr" to accept a negative repeat count.
6265         (find_instruction_backward): New function.
6266         (read_memory_backward): New function.
6267         (integer_is_zero): New function.
6268         (find_string_backward): New function.
6269         (do_examine): Use new functions to examine memory backward.
6270         (_initialize_printcmd): Mention that 'x' command supports a negative
6271         repeat count.
6272
6273 2016-06-09  Toshihito Kikuchi  <k.toshihito@yahoo.de>
6274
6275         * MAINTAINERS (Write After Approval): Add Toshihito Kikuchi.
6276
6277 2016-06-09  Tom Tromey  <tom@tromey.com>
6278
6279         PR python/19819:
6280         * python/py-xmethods.c (invoke_method_name)
6281         (py_get_result_type_method_name, py_invoke_method_name): Remove.
6282         (gdbpy_initialize_xmethods): Don't initialize
6283         py_invoke_method_name, py_get_result_type_method_name.
6284
6285 2016-06-07  Simon Marchi  <simon.marchi@ericsson.com>
6286
6287         * mi/mi-interp.c (mi_record_changed): Add missing braces.
6288
6289 2016-06-07  Bernhard Heckel  <bernhard.heckel@intel.com>
6290
6291         * findvar.c (follow_static_link): Check for valid pointer.
6292
6293 2016-06-06  Simon Marchi  <simon.marchi@ericsson.com>
6294
6295         * NEWS: Mention the new fields in =record-started.
6296         * common/btrace-common.h (btrace_format_short_string): New function
6297         declaration.
6298         * common/btrace-common.c (btrace_format_short_string): New
6299         function.
6300         * mi/mi-interp.c (mi_record_changed): Output method and format
6301         fields in the =record-started record.
6302         * record-btrace.c (record_btrace_open): Adapt record_changed
6303         notification.
6304         * record-full.c (record_full_open): Likewise.
6305         * record.c (cmd_record_stop): Likewise.
6306
6307 2016-06-02  Jon Turney  <jon.turney@dronecode.org.uk>
6308
6309         * windows-nat.c (handle_output_debug_string): Return type of
6310         gdb_signal_from_host() is gdb_signal, not an int.
6311         (windows_get_exec_module_filename): Add pointer casts for C++.
6312
6313 2016-06-02  Tom Tromey  <tom@tromey.com>
6314
6315         PR python/18984:
6316         * python/python.c (gdbpy_solib_name): Use GDB_PY_LLU_ARG.
6317
6318 2016-06-01  Pedro Alves  <palves@redhat.com>
6319
6320         * remote-fileio.c (remote_fio_ctrl_c_flag, remote_fio_sa)
6321         (remote_fio_osa)
6322         (remote_fio_ofunc, remote_fileio_sig_init, remote_fileio_sig_set)
6323         (remote_fileio_sig_exit, remote_fileio_ctrl_c_signal_handler):
6324         Delete.
6325         (remote_fileio_o_quit_handler): New global.
6326         (remote_fileio_quit_handler): New function.
6327         (remote_fileio_reply): Check the quit flag instead of the custom
6328         'remote_fio_ctrl_c_flag' flag.  Restore the quit handler instead
6329         of changing the SIGINT handler.
6330         (do_remote_fileio_request): Override the quit handler instead of
6331         changing the SIGINT handler.
6332
6333 2016-06-01  Nick Clifton  <nickc@redhat.com>
6334
6335         * common/common-utils.c (xmalloc_failed): New function.  Provided
6336         so that the version in libiberty is not linked in.
6337
6338 2016-06-01  Markus Metzger  <markus.t.metzger@intel.com>
6339
6340         * infcmd.c (skip_finish_frames): New.
6341         (finish_command): Call skip_finish_frames.
6342
6343 2016-06-01  Yao Qi  <yao.qi@linaro.org>
6344
6345         PR remote/19998
6346         * remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Call
6347         quit_serial_event_set.
6348
6349 2016-06-01  Joel Brobecker  <brobecker@adacore.com>
6350
6351         GDB 7.11.1 released.
6352
6353 2016-05-31  Martin Galvan  <martin.galvan@tallertechnologies.com>
6354
6355         PR c++/19893
6356         * dwarf2loc.c (coerce_pieced_ref, indirect_synthetic_pointer,
6357         fetch_const_value_from_synthetic_pointer): New functions.
6358         (indirect_pieced_value): Move lower half to indirect_synthetic_pointer.
6359         (pieced_value_funcs): Implement coerce_ref.
6360         * valops.c (value_addr): Call coerce_ref for synthetic references.
6361         * valprint.c (valprint_check_validity): Return true for synthetic
6362         references.  Also, don't show "<synthetic pointer>" if they reference
6363         addressable values.
6364         (generic_val_print_ref): Handle synthetic references.  Also move some
6365         code to print_ref_address.
6366         (print_ref_address, get_value_addr_contents): New functions.
6367
6368 2016-05-30  Jan Kratochvil  <jan.kratochvil@redhat.com>
6369
6370         PR c++/15231
6371         * dwarf2read.c (enum pc_bounds_kind): Add PC_BOUNDS_INVALID.
6372         (process_psymtab_comp_unit_reader, read_func_scope): Adjust callers.
6373         (read_lexical_block_scope): Import DIEs from bare DW_TAG_lexical_block.
6374         (read_call_site_scope): Adjust callers.
6375         (dwarf2_get_pc_bounds): Implement pc_bounds_invalid.
6376         (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.
6377
6378 2016-05-30  Jan Kratochvil  <jan.kratochvil@redhat.com>
6379
6380         Code cleanup: dwarf2_get_pc_bounds: -1/0/+1 -> enum
6381         * dwarf2read.c (enum pc_bounds_kind) New.
6382         (dwarf2_get_pc_bounds): Use it in the declaration.
6383         (process_psymtab_comp_unit_reader): Adjust caller.  Rename has_pc_info
6384         to cu_bounds_kind.
6385         (read_func_scope, read_lexical_block_scope, read_call_site_scope):
6386         Adjust callers.
6387         (dwarf2_get_pc_bounds): Use enum pc_bounds_kind in the definition.
6388         (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.
6389
6390 2016-05-29  Jan Kratochvil  <jan.kratochvil@redhat.com>
6391
6392         * NEWS (QCatchSyscalls): Remove the parameter.  Include ...
6393         (QCatchSyscalls:1 in qSupported) ... this separate entry which got
6394         deleted.
6395
6396 2016-05-29  Jan Kratochvil  <jan.kratochvil@redhat.com>
6397
6398         * NEWS (N stop reply): Remove empty line.
6399
6400 2016-05-28  Alan Modra  <amodra@gmail.com>
6401
6402         * compile/compile-object-load.c (link_callbacks_multiple_definition,
6403         link_callbacks_warning, link_callbacks_undefined_symbol,
6404         link_callbacks_undefined_symbol, link_callbacks_reloc_overflow,
6405         link_callbacks_reloc_dangerous,
6406         link_callbacks_unattached_reloc): Return void.
6407
6408 2016-05-27  Andrew Burgess  <andrew.burgess@embecosm.com>
6409
6410         * opencl-lang.c (evaluate_subexp_opencl): If
6411         EVAL_AVOID_SIDE_EFFECTS mode, forward the VALUE_LVAL attribute to
6412         the returned value in the STRUCTOP_STRUCT case.
6413
6414 2016-05-27  Andrew Burgess  <andrew.burgess@embecosm.com>
6415
6416         * eval.c (evaluate_subexp_standard): If EVAL_AVOID_SIDE_EFFECTS
6417         mode, forward the VALUE_LVAL attribute to the returned value in
6418         the STRUCTOP_PTR case.
6419
6420 2016-05-25  Tom Tromey  <tom@tromey.com>
6421
6422         * python/py-value.c (value_object_as_number): Use correct spelling
6423         of HAVE_LIBPYTHON2_4.
6424
6425 2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>
6426
6427         * f-typeprint.c (f_type_print_base): Replace 0 by show.
6428
6429 2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>
6430
6431         * f-typeprint.c (f_type_print_base): Decrease show by one.
6432
6433 2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>
6434
6435         * f-typeprint.c (f_type_print_base): Don't print fields when show < 0.
6436
6437 2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>
6438
6439         * f-typeprint.c (f_type_print_base): Take print level into account.
6440
6441 2016-05-24  Tom Tromey  <tom@tromey.com>
6442
6443         PR python/17386:
6444         * python/py-value.c (value_object_as_number): Add
6445         nb_inplace_floor_divide, nb_inplace_true_divide, nb_index.
6446
6447 2016-05-24  Tom Tromey  <tom@tromey.com>
6448
6449         * python/py-value.c (value_object_as_number): Add
6450         nb_inplace_divide for Python 2.
6451
6452 2016-05-23  Tom Tromey  <tom@tromey.com>
6453
6454         PR python/17981:
6455         * python/py-breakpoint.c (gdbpy_breakpoints): Return a new tuple
6456         when there are no breakpoints.
6457
6458 2016-05-24  Pedro Alves  <palves@redhat.com>
6459
6460         PR gdb/19828
6461         * linux-nat.c (attach_proc_task_lwp_callback): Mark the lwp
6462         resumed, and add the thread to GDB's thread list.
6463
6464 2016-05-24  Pedro Alves  <palves@redhat.com>
6465
6466         PR gdb/19828
6467         * linux-nat.c (get_pending_status): If the thread reported the
6468         event to the core and it's pending, use the pending status signal
6469         number.
6470
6471 2016-05-24  Pedro Alves  <palves@redhat.com>
6472
6473         PR gdb/19828
6474         * linux-nat.c (lwp_lwpid_htab): New htab.
6475         (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
6476         (lwp_lwpid_htab_add_lwp): New functions.
6477         (lwp_list): Tweak comment.
6478         (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
6479         functions.
6480         (purge_lwp_list): Rewrite, using htab_traverse_noresize.
6481         (add_initial_lwp): Add lwp to htab too.  Use lwp_list_add.
6482         (delete_lwp): Use lwp_list_remove.  Remove htab too.
6483         (find_lwp_pid): Search in htab.
6484         (_initialize_linux_nat): Call lwp_lwpid_htab_create.
6485         * linux-nat.h (struct lwp_info) <prev>: New field.
6486
6487 2016-05-24  Pedro Alves  <palves@redhat.com>
6488
6489         PR gdb/19828
6490         * linux-nat.c (lwp_lwpid_htab): New htab.
6491         (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
6492         (lwp_lwpid_htab_add_lwp): New functions.
6493         (lwp_list): Tweak comment.
6494         (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
6495         functions.
6496         (purge_lwp_list): Rewrite, using htab_traverse_noresize.
6497         (add_initial_lwp): Add lwp to htab too.  Use lwp_list_add.
6498         (delete_lwp): Use lwp_list_remove.  Remove htab too.
6499         (find_lwp_pid): Search in htab.
6500         (_initialize_linux_nat): Call lwp_lwpid_htab_create.
6501         * linux-nat.h (struct lwp_info) <prev>: New field.
6502
6503 2016-05-24  Pedro Alves  <palves@redhat.com>
6504
6505         PR gdb/19828
6506         * linux-nat.c (linux_resume_one_lwp_throw): Clear the LWP's core
6507         field.
6508         (linux_nat_update_thread_list): Don't fetch the core if already
6509         known.
6510
6511 2016-05-24  Pedro Alves  <palves@redhat.com>
6512
6513         PR gdb/19828
6514         * linux-tdep.c (find_mapping_size): Delete.
6515         (linux_vsyscall_range_raw): Rewrite reading from
6516         /proc/PID/task/PID/maps directly instead of using
6517         gdbarch_find_memory_regions.
6518
6519 2016-05-24  Pedro Alves  <palves@redhat.com>
6520
6521         PR gdb/19828
6522         * linux-nat.c (report_thread_events): New global.
6523         (linux_handle_extended_wait): Report
6524         TARGET_WAITKIND_THREAD_CREATED if thread event reporting is
6525         enabled.
6526         (wait_lwp, linux_nat_filter_event): Report all thread exits if
6527         thread event reporting is enabled.  Remove comment.
6528         (filter_exit_event): New function.
6529         (linux_nat_wait_1): Use it.
6530         (linux_nat_thread_events): New function.
6531         (linux_nat_add_target): Install it as target_thread_events method.
6532
6533 2016-05-24  Yan-Ting Lin  <currygt52@gmail.com>
6534
6535         * MAINTAINERS (Write After Approval): Add "Yan-Ting Lin".
6536
6537 2016-05-23  Yao Qi  <yao.qi@arm.com>
6538
6539         * arch-utils.c (default_code_of_frame_writable): New function.
6540         * arch-utils.h (default_code_of_frame_writable): Declare.
6541         * arm-tdep.c (arm_code_of_frame_writable): New function.
6542         (arm_gdbarch_init): Install gdbarch method
6543         code_of_frame_writable if the target is M-profile.
6544         * frame.c (skip_unwritable_frames): New function.
6545         * frame.h (skip_unwritable_frames): Declare.
6546         * gdbarch.sh (code_of_frame_writable): New.
6547         * gdbarch.c, gdbarch.h: Re-generated.
6548         * infcmd.c (finish_command): Call skip_unwritable_frames.
6549
6550 2016-05-23  Tom Tromey  <tom@tromey.com>
6551
6552         PR python/19438, PR python/18393:
6553         * python/py-objfile.c (objfpy_initialize): Initialize self->dict.
6554         * python/py-progspace.c (pspy_initialize): Initialize self->dict.
6555
6556 2016-05-23  Gary Benson  <gbenson@redhat.com>
6557
6558         * nat/gdb_thread_db.h (td_thr_validate_ftype): Remove typedef.
6559         * linux-thread-db.c (struct thread_db_info) <td_thr_validate_p>:
6560         Remove field.
6561         (try_thread_db_load_1): Remove td_thr_validate initialization.
6562
6563 2016-05-23  Jon Boden  <jon@ubuntubsd.org>  (tiny change)
6564
6565         * configure.ac: Search for libutil-freebsd as alternative to libutil.
6566         * configure: Re-generated.
6567
6568 2016-05-19  Andreas Schwab  <schwab@suse.de>
6569
6570         * ia64-libunwind-tdep.c (libunwind_descr): Add cast from void *.
6571         (libunwind_frame_set_descr): Likewise.
6572         (libunwind_frame_cache): Likewise.
6573         (libunwind_frame_dealloc_cache): Likewise.
6574         (libunwind_frame_sniffer): Likewise.
6575         (libunwind_search_unwind_table): Likewise.
6576         (libunwind_sigtramp_frame_sniffer): Likewise.
6577         (libunwind_get_reg_special): Likewise.
6578         (libunwind_load): Likewise.
6579         * ia64-linux-nat.c (ia64_linux_fetch_register): Likewise.
6580         (ia64_linux_store_register): Likewise.
6581         (ia64_linux_xfer_partial): Likewise.
6582         * ia64-tdep.c (ia64_access_reg): Likewise.
6583         (ia64_access_fpreg): Likewise.
6584         (ia64_access_rse_reg): Likewise.
6585         (ia64_access_rse_fpreg): Likewise.
6586
6587 2016-05-18  Tom Tromey  <tom@tromey.com>
6588
6589         * rust-lang.c (rust_subscript): Initialize "high".
6590
6591 2016-05-17  Simon Marchi  <simon.marchi@ericsson.com>
6592
6593         PR gdb/20045
6594         * mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
6595         of target_is_async_p.
6596
6597 2016-05-17  Simon Marchi  <simon.marchi@ericsson.com>
6598
6599         PR gdb/18077
6600         * mi/mi-main.c (run_one_inferior): Use run target to determine
6601         whether to run async or not.
6602         (mi_cmd_exec_run): Likewise.
6603
6604 2016-05-17  Tom Tromey  <tom@tromey.com>
6605
6606         * std-operator.def (OP_RANGE): Rename from OP_F90_RANGE.
6607         * rust-lang.c: Don't include f-lang.h.
6608         (rust_range, rust_compute_range, rust_subscript)
6609         (rust_evaluate_subexp): Update.
6610         * rust-exp.y: Don't include f-lang.h.
6611         (ast_range, convert_ast_to_expression): Update.
6612         * parse.c (operator_length_standard): Update.
6613         * f-lang.h (enum f90_range_type): Move to expression.h.
6614         * f-exp.y: Use OP_RANGE.
6615         * expression.h (enum range_type): New enum; renamed from
6616         f90_range_type.
6617         * expprint.c: Don't include f-lang.h.
6618         (print_subexp_standard, dump_subexp_body_standard): Use OP_RANGE.
6619         * eval.c (value_f90_subarray, evaluate_subexp_standard): Update.
6620
6621 2016-05-17  Tom Tromey  <tom@tromey.com>
6622
6623         * NEWS: Add Rust item.
6624
6625 2016-05-17  Tom Tromey  <tom@tromey.com>
6626             Manish Goregaokar <manishsmail@gmail.com>
6627
6628         * symtab.c (symbol_find_demangled_name): Handle Rust.
6629         * symfile.c (init_filename_language_table): Treat ".rs" as Rust.
6630         * std-operator.def (STRUCTOP_ANONYMOUS, OP_RUST_ARRAY): New
6631         constants.
6632         * rust-lang.h: New file.
6633         * rust-lang.c: New file.
6634         * rust-exp.y: New file.
6635         * dwarf2read.c (read_file_scope): Add Rust producer sniffing.
6636         (dwarf2_compute_name, read_func_scope, read_structure_type)
6637         (read_base_type, read_subrange_type, set_cu_language)
6638         (new_symbol_full, determine_prefix): Handle Rust.
6639         * defs.h (enum language) <language_rust>: New constant.
6640         * Makefile.in (SFILES): Add rust-exp.y, rust-lang.c.
6641         (COMMON_OBS): Add rust-exp.o, rust-lang.o.
6642
6643 2016-05-17  Tom Tromey  <tom@tromey.com>
6644
6645         * valprint.h (struct generic_val_print_array) <array_start,
6646         array_end>: New fields.
6647         * valprint.c (generic_val_print_array): Add "decorations"
6648         parameter.  Use "array_start", "array_end".
6649         (generic_val_print) <TYPE_CODE_ARRAY>: Update.
6650         * p-valprint.c (p_decorations): Update.
6651         * m2-valprint.c (m2_decorations): Update.
6652         * f-valprint.c (f_decorations): Update.
6653         * c-valprint.c (c_decorations): Update.
6654
6655 2016-05-17  Tom Tromey  <tom@tromey.com>
6656
6657         * NEWS: Add "maint selftest" entry.
6658         * selftest.h: New file.
6659         * selftest.c: New file.
6660         * maint.c: Include selftest.h.
6661         (maintenance_selftest): New function.
6662         (_initialize_maint_cmds): Add "maint selftest" command.
6663         * configure.ac (GDB_SELF_TEST): Maybe define.
6664         * config.in, configure: Rebuild.
6665         * Makefile.in (SFILES): Add selftest.c.
6666         (COMMON_OBS): Add selftest.o.
6667
6668 2016-05-17  Tom Tromey  <tom@tromey.com>
6669
6670         * expprint.c: Include f-lang.h.
6671         (print_subexp_standard, dump_subexp_body_standard): Handle
6672         OP_F90_RANGE.
6673
6674 2016-05-17  Tom Tromey  <tom@tromey.com>
6675
6676         * Makefile.in (init.c): Search .y files for initialization
6677         functions.
6678
6679 2016-05-12  Doug Evans  <dje@google.com>
6680
6681         PR symtab/19999
6682         * dwarf2loc.c (dwarf2_find_location_expression): For DWO files still
6683         add base_offset.
6684
6685 2016-05-10  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>
6686
6687         * iq2000-tdep.c (iq2000_scan_prologue): Remove if that shouldn't guard
6688         anything.
6689         * linespec.c (add_sal_to_sals): Restore call to symtab_to_fullname.
6690
6691 2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>
6692
6693         * arm-tdep.c (arm_elf_make_msymbol_special): Use
6694         ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
6695
6696 2016-05-07  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>
6697
6698         * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused
6699         variables.
6700         * aarch64-tdep.c (aarch64_skip_prologue): Likewise.
6701         (aarch64_scan_prologue): Likewise.
6702         (aarch64_prologue_prev_register): Likewise.
6703         (aarch64_dwarf2_prev_register): Likewise.
6704         (pass_in_v): Likewise.
6705         (aarch64_push_dummy_call): Likewise.
6706         (aarch64_breakpoint_from_pc): Likewise.
6707         (aarch64_return_in_memory): Likewise.
6708         (aarch64_return_value): Likewise.
6709         (aarch64_displaced_step_b_cond): Likewise.
6710         (aarch64_displaced_step_cb): Likewise.
6711         (aarch64_displaced_step_tb): Likewise.
6712         (aarch64_gdbarch_init): Likewise.
6713         (aarch64_process_record): Likewise.
6714         * alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise.
6715         * alpha-tdep.c (_initialize_alpha_tdep): Likewise.
6716         * amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise.
6717         * amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise.
6718         * amd64-tdep.c (fixup_riprel): Likewise.
6719         * amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise.
6720         (amd64_windows_frame_decode_insns): Likewise.
6721         (amd64_windows_frame_cache): Likewise.
6722         (amd64_windows_frame_prev_register): Likewise.
6723         (amd64_windows_frame_this_id): Likewise.
6724         (amd64_windows_init_abi): Likewise.
6725         * arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise.
6726         (arm_linux_get_next_pcs_syscall_next_pc): Likewise.
6727         * arm-symbian-tdep.c (arm_symbian_init_abi): Likewise.
6728         * arm-tdep.c (arm_make_epilogue_frame_cache): Likewise.
6729         (arm_epilogue_frame_prev_register): Likewise.
6730         (arm_record_vdata_transfer_insn): Likewise.
6731         (arm_record_exreg_ld_st_insn): Likewise.
6732         * auto-load.c (execute_script_contents): Likewise.
6733         (print_scripts): Likewise.
6734         * avr-tdep.c (avr_frame_prev_register): Likewise.
6735         (avr_push_dummy_call): Likewise.
6736         * bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise.
6737         * bfin-tdep.c (bfin_gdbarch_init): Likewise.
6738         * blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise.
6739         * break-catch-throw.c (fetch_probe_arguments): Likewise.
6740         * breakpoint.c (breakpoint_xfer_memory): Likewise.
6741         (breakpoint_init_inferior): Likewise.
6742         (breakpoint_inserted_here_p): Likewise.
6743         (software_breakpoint_inserted_here_p): Likewise.
6744         (hardware_breakpoint_inserted_here_p): Likewise.
6745         (bpstat_what): Likewise.
6746         (break_range_command): Likewise.
6747         (save_breakpoints): Likewise.
6748         * coffread.c (coff_symfile_read): Likewise.
6749         * cris-tdep.c (cris_push_dummy_call): Likewise.
6750         (cris_scan_prologue): Likewise.
6751         (cris_register_size): Likewise.
6752         (_initialize_cris_tdep): Likewise.
6753         * d-exp.y: Likewise.
6754         * dbxread.c (dbx_read_symtab): Likewise.
6755         (process_one_symbol): Likewise.
6756         (coffstab_build_psymtabs): Likewise.
6757         (elfstab_build_psymtabs): Likewise.
6758         * dicos-tdep.c (dicos_init_abi): Likewise.
6759         * disasm.c (do_mixed_source_and_assembly): Likewise.
6760         (gdb_disassembly): Likewise.
6761         * dtrace-probe.c (dtrace_process_dof): Likewise.
6762         * dwarf2read.c (error_check_comp_unit_head): Likewise.
6763         (build_type_psymtabs_1): Likewise.
6764         (skip_one_die): Likewise.
6765         (process_imported_unit_die): Likewise.
6766         (dwarf2_physname): Likewise.
6767         (read_file_scope): Likewise.
6768         (setup_type_unit_groups): Likewise.
6769         (create_dwo_cu_reader): Likewise.
6770         (create_dwo_cu): Likewise.
6771         (create_dwo_unit_in_dwp_v1): Likewise.
6772         (create_dwo_unit_in_dwp_v2): Likewise.
6773         (lookup_dwo_unit_in_dwp): Likewise.
6774         (free_dwo_file): Likewise.
6775         (check_producer): Likewise.
6776         (dwarf2_add_typedef): Likewise.
6777         (dwarf2_add_member_fn): Likewise.
6778         (read_unsigned_leb128): Likewise.
6779         (read_signed_leb128): Likewise.
6780         (dwarf2_const_value): Likewise.
6781         (follow_die_sig_1): Likewise.
6782         (dwarf_decode_macro_bytes): Likewise.
6783         * extension.c (restore_active_ext_lang): Likewise.
6784         * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
6785         * ft32-tdep.c (ft32_analyze_prologue): Likewise.
6786         * gdbtypes.c (lookup_typename): Likewise.
6787         (resolve_dynamic_range): Likewise.
6788         (check_typedef): Likewise.
6789         * h8300-tdep.c (h8300_is_argument_spill): Likewise.
6790         (h8300_gdbarch_init): Likewise.
6791         * hppa-tdep.c (hppa32_push_dummy_call): Likewise.
6792         (hppa_frame_this_id): Likewise.
6793         (_initialize_hppa_tdep): Likewise.
6794         * hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise.
6795         * hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise.
6796         * i386-dicos-tdep.c (i386_dicos_init_abi): Likewise.
6797         * i386-tdep.c (i386_bnd_type): Likewise.
6798         (i386_gdbarch_init): Likewise.
6799         (i386_mpx_bd_base): Likewise.
6800         * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise.
6801         * i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise.
6802         * ia64-tdep.c (examine_prologue): Likewise.
6803         (ia64_frame_cache): Likewise.
6804         (ia64_push_dummy_call): Likewise.
6805         * infcmd.c (finish_command_fsm_async_reply_reason): Likewise.
6806         (default_print_one_register_info): Likewise.
6807         * infrun.c (infrun_thread_ptid_changed): Likewise.
6808         (thread_still_needs_step_over): Likewise.
6809         (stop_all_threads): Likewise.
6810         (restart_threads): Likewise.
6811         (keep_going_stepped_thread): Likewise.
6812         * iq2000-tdep.c (iq2000_scan_prologue): Likewise.
6813         * language.c (language_init_primitive_type_symbols): Likewise.
6814         * linespec.c (add_sal_to_sals): Likewise.
6815         * linux-nat.c (status_callback): Likewise.
6816         (kill_unfollowed_fork_children): Likewise.
6817         (linux_nat_kill): Likewise.
6818         * linux-tdep.c (linux_fill_prpsinfo): Likewise.
6819         * linux-thread-db.c (thread_db_notice_clone): Likewise.
6820         (record_thread): Likewise.
6821         * location.c (string_to_event_location_basic): Likewise.
6822         * m32c-tdep.c (m32c_prev_register): Likewise.
6823         * m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
6824         * m32r-tdep.c (decode_prologue): Likewise.
6825         * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
6826         * machoread.c (macho_symtab_read): Likewise.
6827         (macho_symfile_read): Likewise.
6828         (macho_symfile_offsets): Likewise.
6829         * maint.c (set_per_command_cmd): Likewise.
6830         * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
6831         (mi_cmd_stack_list_variables): Likewise.
6832         * mi/mi-main.c (mi_cmd_exec_run): Likewise.
6833         (output_register): Likewise.
6834         (mi_cmd_execute): Likewise.
6835         (mi_cmd_trace_define_variable): Likewise.
6836         (print_variable_or_computed): Likewise.
6837         * minsyms.c (prim_record_minimal_symbol_full): Likewise.
6838         * mn10300-tdep.c (mn10300_frame_prev_register): Likewise.
6839         * msp430-tdep.c (msp430_pseudo_register_write): Likewise.
6840         * mt-tdep.c (mt_registers_info): Likewise.
6841         * nios2-tdep.c (nios2_analyze_prologue): Likewise.
6842         (nios2_push_dummy_call): Likewise.
6843         (nios2_frame_unwind_cache): Likewise.
6844         (nios2_stub_frame_cache): Likewise.
6845         (nios2_stub_frame_sniffer): Likewise.
6846         (nios2_gdbarch_init): Likewise.
6847         * ppc-ravenscar-thread.c: Likewise.
6848         * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise.
6849         * python/py-evts.c (add_new_registry): Likewise.
6850         * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
6851         (bpfinishpy_detect_out_scope_cb): Likewise.
6852         * python/py-framefilter.c (py_print_value): Likewise.
6853         * python/py-inferior.c (infpy_write_memory): Likewise.
6854         * python/py-infevents.c (create_inferior_call_event_object): Likewise.
6855         * python/py-infthread.c (thpy_get_ptid): Likewise.
6856         * python/py-linetable.c (ltpy_get_pcs_for_line): Likewise.
6857         (ltpy_get_all_source_lines): Likewise.
6858         (ltpy_is_valid): Likewise.
6859         (ltpy_iternext): Likewise.
6860         * python/py-symtab.c (symtab_and_line_to_sal_object): Likewise.
6861         * python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise.
6862         (unwind_infopy_str): Likewise.
6863         * python/py-varobj.c (py_varobj_get_iterator): Likewise.
6864         * ravenscar-thread.c (ravenscar_inferior_created): Likewise.
6865         * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
6866         * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
6867         * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
6868         * s390-linux-tdep.c (s390_supply_tdb_regset): Likewise.
6869         (s390_frame_prev_register): Likewise.
6870         (s390_dwarf2_frame_init_reg): Likewise.
6871         (s390_record_vr): Likewise.
6872         (s390_process_record): Likewise.
6873         * score-tdep.c (score_push_dummy_call): Likewise.
6874         (score3_analyze_prologue): Likewise.
6875         * sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
6876         * sh64-tdep.c (sh64_analyze_prologue): Likewise.
6877         (sh64_push_dummy_call): Likewise.
6878         (sh64_extract_return_value): Likewise.
6879         (sh64_do_fp_register): Likewise.
6880         * solib-aix.c (solib_aix_get_section_offsets): Likewise.
6881         * solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise.
6882         (darwin_solib_read_all_image_info_addr): Likewise.
6883         * solib-dsbt.c (enable_break): Likewise.
6884         * solib-frv.c (enable_break2): Likewise.
6885         (frv_fdpic_find_canonical_descriptor): Likewise.
6886         * solib-svr4.c (svr4_handle_solib_event): Likewise.
6887         * sparc-tdep.c (sparc_skip_stack_check): Likewise.
6888         * sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise.
6889         * sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise.
6890         * spu-tdep.c (info_spu_dma_cmdlist): Likewise.
6891         * stack.c (read_frame_local): Likewise.
6892         * symfile.c (symbol_file_add_separate): Likewise.
6893         (remove_symbol_file_command): Likewise.
6894         * symmisc.c (maintenance_print_one_line_table): Likewise.
6895         * symtab.c (symbol_cache_flush): Likewise.
6896         (basic_lookup_transparent_type): Likewise.
6897         (sort_search_symbols_remove_dups): Likewise.
6898         * target.c (target_memory_map): Likewise.
6899         (target_detach): Likewise.
6900         (target_resume): Likewise.
6901         (acquire_fileio_fd): Likewise.
6902         (target_store_registers): Likewise.
6903         * thread.c (print_thread_info_1): Likewise.
6904         * tic6x-tdep.c (tic6x_analyze_prologue): Likewise.
6905         * tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise.
6906         * tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
6907         (tilegx_analyze_prologue): Likewise.
6908         (tilegx_stack_frame_destroyed_p): Likewise.
6909         (tilegx_frame_cache): Likewise.
6910         * tracefile.c (trace_save): Likewise.
6911         * tracepoint.c (encode_actions_and_make_cleanup): Likewise.
6912         (start_tracing): Likewise.
6913         (print_one_static_tracepoint_marker): Likewise.
6914         * tui/tui.c (tui_enable): Likewise.
6915         * valops.c (value_struct_elt_bitpos): Likewise.
6916         (find_overload_match): Likewise.
6917         (find_oload_champ): Likewise.
6918         * value.c (value_contents_copy_raw): Likewise.
6919         * windows-tdep.c (windows_get_tlb_type): Likewise.
6920         * x86-linux-nat.c (x86_linux_enable_btrace): Likewise.
6921         * xcoffread.c (record_minimal_symbol): Likewise.
6922         (scan_xcoff_symtab): Likewise.
6923         * xtensa-tdep.c (execute_code): Likewise.
6924         (xtensa_gdbarch_init): Likewise.
6925         (_initialize_xtensa_tdep): Likewise.
6926
6927 2016-05-04  Ulrich Weigand  <uweigand@de.ibm.com>
6928
6929         * spu-linux-nat.c (spu_bfd_iovec_pread): Add pointer cast for C++.
6930         (spu_bfd_open): Likewise.
6931
6932 2016-05-04  Yao Qi  <yao.qi@linaro.org>
6933
6934         PR gdb/19947
6935         * corefile.c (read_memory): Rename it to ...
6936         (read_memory_object): ... it.  Add parameter object.
6937         (read_memory): Call read_memory_object.
6938         (read_stack): Likewise.
6939         (read_code): Likewise.
6940
6941 2016-05-03  Yunlian Jiang <yunlian@google.com>
6942             Doug Evans  <dje@google.com>
6943
6944         PR symtab/19914
6945         * dwarf2read.c (open_and_init_dwp_file): Look at backlink if objfile
6946         is separate debug file.
6947
6948 2016-05-03  Don Breazeal <donb@codesourcery.com>
6949
6950         * serial.h (gdb_pipe): Fix argument names in comment.
6951
6952 2016-05-03  Pedro Alves <palves@redhat.com>
6953
6954         PR python/20037
6955         * python/python.c (_initialize_python) [IS_PY3K]: xstrdup/xfree
6956         oldloc.
6957
6958 2016-05-03  Pedro Alves <palves@redhat.com>
6959
6960         * python/python.c (_initialize_python) [IS_PY3K]: Remove dead
6961         code.
6962
6963 2016-05-03  Pedro Alves  <palves@redhat.com>
6964
6965         * configure.ac (PYTHON_LIBS): Sed away "-Xlinker -export-dynamic".
6966         * configure: Regenerate.
6967
6968 2016-05-03  Pedro Alves  <palves@redhat.com>
6969
6970         * configure.ac (checking for the dynamic export flag): Add
6971         $PYTHON_CPPFLAGS to CPPFLAGS.
6972         * configure: Regenerate.
6973
6974 2016-05-03  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
6975
6976         * symfile.c (find_pc_overlay): Add braces to avoid -Wparentheses
6977         warning.
6978         (find_pc_mapped_section): Likewise.
6979         (list_overlays_command): Likewise.
6980
6981 2016-05-02  Eli Zaretskii  <eliz@gnu.org>
6982
6983         * windows-nat.c (_initialize_check_for_gdb_ini): Fix off-by-one
6984         error in allocation of space for "$HOME/.gdbinit" string.  This
6985         caused GDB to abort on startup whenever a '~/gdb.ini' file was
6986         actually found, because xsnprintf would hit an assertion
6987         violation.
6988
6989 2016-04-28  Simon Marchi  <simon.marchi@ericsson.com>
6990
6991         * cli/cli-decode.c (help_cmd_list): Do not list commands that
6992         are deprecated.
6993
6994 2016-04-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
6995
6996         * remote.c (remote_start_remote): Detect PACKET_vFile_setfs.support.
6997
6998 2016-04-27  Martin Galvan  <martin.galvan@tallertechnologies.com>
6999
7000         * c-valprint.c (c_value_print): Always convert val back to reference
7001         type if we converted it to a pointer type.
7002
7003 2016-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
7004
7005         * configure.ac: Enhance configure check for babeltrace to reject
7006         non-C++-enabled versions.
7007         * configure: Regenerate.
7008
7009 2016-04-26  Sanimir Agovic  <sanimir.agovic@intel.com>
7010             Keven Boell  <keven.boell@intel.com>
7011             Bernhard Heckel  <bernhard.heckel@intel.com>
7012
7013         * f-valprint.c (f77_create_arrayprint_offset_tbl): Remove
7014         function.
7015         (F77_DIM_SIZE, F77_DIM_OFFSET): Remove macro.
7016         (f77_print_array_1): Use value_subscript to subscript a
7017         value array.
7018         (f77_print_array): Remove call to f77_create_arrayprint_offset_tbl.
7019         (f_val_print): Use value_field to construct a field value.
7020
7021 2016-04-26  Bernhard Heckel  <bernhard.heckel@intel.com>
7022
7023         * valarith.c (value_address): Resolve dynamic types.
7024
7025 2016-04-26  Bernhard Heckel  <bernhard.heckel@intel.com>
7026             Keven Boell  <kevel.boell@intel.com>
7027
7028         * NEWS: Add new supported features for fortran.
7029         * gdbtypes.c (remove_dyn_prop): New.
7030         (resolve_dynamic_struct): Keep type length for fortran structs.
7031         * gdbtypes.h: Forward declaration of new function.
7032         * value.c (value_address): Return dynamic resolved location of a value.
7033         (set_value_component_location): Adjust the value address
7034         for single value prints.
7035         (value_primitive_field): Support value types with a dynamic location.
7036         (set_internalvar): Remove dynamic location property of
7037         internal variables.
7038
7039 2016-04-25  Pedro Alves  <palves@redhat.com>
7040             Yao Qi  <yao.qi@linaro.org>
7041
7042         * mem-break.c (set_raw_breakpoint_at): Create a raw breakpoint
7043         object.  Insert it if it is not inserted yet.  Increase the
7044         refcount and link it into the proc's raw breakpoint list.
7045
7046 2016-04-25  Yao Qi  <yao.qi@linaro.org>
7047
7048         * breakpoint.c (should_be_inserted): Return 0 if the location's
7049         owner is not single step breakpoint or single step breakpoint's
7050         thread isn't the thread which is stepping past a breakpoint.
7051         * gdbarch.sh (software_single_step): Update comments.
7052         * gdbarch.h: Regenerated.
7053         * infrun.c (struct step_over_info) <thread>: New field.
7054         (set_step_over_info): New argument 'thread'.  Callers updated.
7055         (clear_step_over_info): Set field thread to -1.
7056         (thread_is_stepping_over_breakpoint): New function.
7057         * infrun.h (thread_is_stepping_over_breakpoint): Declaration.
7058
7059 2016-04-22  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
7060
7061         * ppc-linux-nat.c (ppc_linux_read_description): Use PPC_FEATURE_HAS_VSX
7062         and PPC_FEATURE_HAS_ALTIVEC to check if such features are available.
7063
7064 2016-04-22  Yao Qi  <yao.qi@linaro.org>
7065
7066         * valops.c (read_value_memory): New local variable 'stack'.
7067         Set it to either TARGET_OBJECT_STACK_MEMORY or
7068         TARGET_OBJECT_MEMORY.
7069
7070 2016-04-22  Pedro Alves  <palves@redhat.com>
7071
7072         * ada-exp.y: Remove all yy symbol remappings.
7073         (GDB_YY_REMAP_PREFIX): Define.
7074         Include "yy-remap.h".
7075         * ada-lang.c (ada_language_defn): Adjust.
7076         * ada-lang.h (ada_error): Rename to ...
7077         (ada_yyerror): ... this.
7078         * c-exp.y: Remove all yy symbol remappings.
7079         (GDB_YY_REMAP_PREFIX): Define.
7080         Include "yy-remap.h".
7081         * c-lang.c (c_language_defn, cplus_language_defn)
7082         (asm_language_defn, minimal_language_defn): Adjust.
7083         * c-lang.h (c_error): Rename to ...
7084         (c_yyerror): ... this.
7085         * d-exp.y: Remove all yy symbol remappings.
7086         (GDB_YY_REMAP_PREFIX): Define.
7087         Include "yy-remap.h".
7088         * d-lang.c (d_language_defn): Adjust.
7089         * d-lang.h (d_error): Rename to ...
7090         (d_yyerror): ... this.
7091         * f-exp.y: Remove all yy symbol remappings.
7092         (GDB_YY_REMAP_PREFIX): Define.
7093         Include "yy-remap.h".
7094         * f-lang.c (f_language_defn): Adjust.
7095         * f-lang.h (f_error): Rename to ...
7096         (f_yyerror): ... this.
7097         * go-exp.y: Remove all yy symbol remappings.
7098         (GDB_YY_REMAP_PREFIX): Define.
7099         Include "yy-remap.h".
7100         * go-lang.c (go_language_defn): Adjust.
7101         * go-lang.h (go_error): Rename to ...
7102         (go_yyerror): ... this.
7103         * jv-exp.y: Remove all yy symbol remappings.
7104         (GDB_YY_REMAP_PREFIX): Define.
7105         Include "yy-remap.h".
7106         * jv-lang.c (java_language_defn): Adjust.
7107         * jv-lang.h (java_error): Rename to ...
7108         (java_yyerror): ... this.
7109         * m2-exp.y: Remove all yy symbol remappings.
7110         (GDB_YY_REMAP_PREFIX): Define.
7111         Include "yy-remap.h".
7112         * m2-lang.c (m2_language_defn): Adjust.
7113         * m2-lang.h (m2_error): Rename to ...
7114         (m2_yyerror): ... this.
7115         * objc-exp.y: Remove all yy symbol remappings.
7116         (GDB_YY_REMAP_PREFIX): Define.
7117         Include "yy-remap.h".
7118         * objc-lang.c (objc_language_defn): Adjust.
7119         * opencl-lang.c (opencl_language_defn): Adjust.
7120         * p-exp.y: Remove all yy symbol remappings.
7121         (GDB_YY_REMAP_PREFIX): Define.
7122         Include "yy-remap.h".
7123         * p-lang.c (pascal_language_defn): Adjust.
7124         * p-lang.h (pascal_error): Rename to ...
7125         (pascal_yyerror): ... this.
7126         * yy-remap.h: New file.
7127
7128 2016-04-22  Pedro Alves  <palves@redhat.com>
7129
7130         * common/common-exceptions.h (GDB_XCPT_TRY): Remove mention of
7131         the foreign frames issue.
7132         [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.
7133
7134 2016-04-22  Pedro Alves  <palves@redhat.com>
7135
7136         * common/common-exceptions.c (enum catcher_state, struct catcher)
7137         (current_catcher): Define in C++ mode too.
7138         (exceptions_state_mc_catch): Call throw_exception_sjlj instead of
7139         throw_exception.
7140         (throw_exception_sjlj, throw_exception_cxx): New functions,
7141         factored out from throw_exception.
7142         (throw_exception): Reimplement.
7143         * common/common-exceptions.h (exceptions_state_mc_init)
7144         (exceptions_state_mc_action_iter)
7145         (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
7146         Declare in C++ mode too.
7147         (TRY): Rename to ...
7148         (TRY_SJLJ): ... this.
7149         (CATCH): Rename to ...
7150         (CATCH_SJLJ): ... this.
7151         (END_CATCH): Rename to ...
7152         (END_CATCH_SJLJ): ... this.
7153         [GDB_XCPT == GDB_XCPT_SJMP] (TRY, CATCH, END_CATCH): Map to SJLJ
7154         equivalents.
7155         (throw_exception): Update comments.
7156         (throw_exception_sjlj): Declare.
7157         * event-top.c (gdb_rl_callback_read_char_wrapper): Extend intro
7158         comment.  Wrap body in TRY_SJLJ/CATCH_SJLJ and rethrow any
7159         intercepted exception.
7160         (gdb_rl_callback_handler): New function.
7161         (gdb_rl_callback_handler_install): Always install
7162         gdb_rl_callback_handler as readline callback.
7163
7164 2016-04-22  Pedro Alves  <palves@redhat.com>
7165
7166         * event-top.c (rl_callback_read_char_wrapper): Rename to ...
7167         (gdb_rl_callback_read_char_wrapper): ... this.
7168         (change_line_handler, gdb_setup_readline): Adjust.
7169
7170 2016-04-22  Yao Qi  <yao.qi@linaro.org>
7171
7172         * aarch32-linux-nat.c (aarch32_gp_regcache_supply): Clear CPSR
7173         bits 20 to 23.
7174
7175 2016-04-22  Joel Brobecker  <brobecker@adacore.com>
7176
7177         * MAINTAINER: Remove myself as AIX Maintainer.
7178
7179 2016-04-22  Maciej W. Rozycki  <macro@imgtec.com>
7180
7181         * mips-tdep.c (mips_gdbarch_init): For GDB_OSABI_LINUX set
7182         `num_regs' to 90 rather than 79.  Where a target description is
7183         present adjust the setting appropriately.
7184
7185 2016-04-21  Pedro Alves  <palves@redhat.com>
7186
7187         * common/common-exceptions.h (GDB_XCPT_TRY): Add comment.
7188         (GDB_XCPT): Always define as GDB_XCPT_SJMP.
7189
7190 2016-04-21  Pedro Alves  <palves@redhat.com>
7191
7192         * aix-thread.c (pdc_read_data, pdc_write_data): Add cast.
7193         (aix_thread_resume): Use PTRACE_TYPE_ARG5.
7194         * rs6000-nat.c (rs6000_ptrace64): Use PTRACE_TYPE_ARG5.
7195         (rs6000_ptrace_ldinfo): Change type of 'ldi' local to void
7196         pointer, and cast return to gdb_byte pointer.
7197
7198 2016-04-21  Pedro Alves  <palves@redhat.com>
7199
7200         * s390-linux-nat.c (fetch_regset, store_regset, check_regset): Use
7201         void * instead of gdb_byte *.
7202
7203 2016-04-21  Pedro Alves  <palves@redhat.com>
7204
7205         * dwarf2read.c (try_open_dwop_file, open_dwo_file)
7206         (file_file_name, file_full_name): Add char * cast to sentinel in
7207         concat/reconcat calls.
7208         * event-top.c (top_level_prompt): Likewise.
7209         * guile/guile.c (initialize_scheme_side): Likewise.
7210         * linux-tdep.c (linux_fill_prpsinfo): Likewise.
7211         * macrotab.c (macro_source_fullname): Likewise.
7212         * main.c (get_init_files, captured_main): Likewise.
7213         * psymtab.c (psymtab_to_fullname): Likewise.
7214         * python/python.c (_initialize_python)
7215         (gdbpy_finish_initialization): Likewise.
7216         * source.c (symtab_to_fullname): Likewise.
7217
7218 2016-04-20  Pedro Alves  <palves@redhat.com>
7219
7220         * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Default to yes.
7221         * configure: Renegerate.
7222
7223 2016-04-20  Pedro Alves  <palves@redhat.com>
7224
7225         * darwin-nat.c (darwin_decode_message): Use gdb_signal_from_host.
7226
7227 2016-04-20  Pedro Alves  <palves@redhat.com>
7228
7229         * aarch64-tdep.c (aarch64_record_load_store): Change type of
7230         'reg_rm_val' local to ULONGEST.
7231
7232 2016-04-20  Pedro Alves  <palves@redhat.com>
7233
7234         * darwin-nat.c (darwin_resume_thread): Add uintptr_t cast.
7235
7236 2016-04-20  Doug Evans  <xdje42@gmail.com>
7237
7238         * symmisc.c (dump_symtab_1): Print owning compunit for identical
7239         blockvectors.
7240
7241 2016-04-20  Yao Qi  <yao.qi@linaro.org>
7242
7243         * aarch32-linux-nat.c: Include "arch/arm-linux.h".
7244
7245 2016-04-20  Yao Qi  <yao.qi@linaro.org>
7246
7247         * arm-linux-tdep.h (ARM_CPSR_GREGNUM): Move it to ...
7248         * arch/arm-linux.h: ... here.
7249
7250 2016-04-19  John Baldwin  <jhb@FreeBSD.org>
7251
7252         * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Change xstateregs
7253         to void *.
7254         (amd64bsd_store_inferior_registers): Likewise.
7255         * fbsd-nat.c (resume_one_thread_cb): Explicitly cast data to ptid_t *.
7256         (resume_all_threads_cb): Likewise.
7257         * i386bsd-nat.c (i386bsd_supply_gregset): Cast gregs to char *.
7258         (i386bsd_collect_gregset): Likewise.
7259         (i386bsd_fetch_inferior_registers): Change xstateregs to void *.
7260         (i386bsd_store_inferior_registers): Likewise.
7261
7262 2016-04-19  John Baldwin  <jhb@FreeBSD.org>
7263
7264         * main.c (setup_alternate_signal_stack): Cast to char *.
7265
7266 2016-04-19  Doug Evans  <xdje42@gmail.com>
7267
7268         * symmisc.c (dump_symtab_1, dump_symtab): Delete arg objfile.
7269         All callers updated.
7270
7271 2016-04-19  Doug Evans  <xdje42@gmail.com>
7272
7273         PR gdb/17911
7274         * source.c (is_regular_file): New arg errno_ptr.
7275         All callers updated.
7276
7277 2016-04-19  Andreas Arnez  <arnez@linux.vnet.ibm.com>
7278
7279         * linux-record.c (record_linux_system_call): Merge handling for
7280         readlink/recv/read and pipe/pipe2.
7281
7282 2016-04-14  Walfred Tedeschi  <walfred.tedeschi@intel.com>
7283
7284         * features/i386/amd64-mpx-linux.xml: Remove AVX feature.
7285         * features/i386/amd64-mpx.xml: Remove AVX feature.
7286         * features/i386/i386-mpx-linux.xml: Remove AVX feature.
7287         * features/i386/i386-mpx.xml: Remove AVX feature.
7288         * features/i386/amd64-mpx-linux.c: Regenerate.
7289         * features/i386/amd64-mpx.c: Regenerate.
7290         * features/i386/i386-mpx-linux.c: Regenerate.
7291         * features/i386/i386-mpx.c: Regenerate.
7292         * regformats/i386/amd64-mpx-linux.dat: Regenerate.
7293         * regformats/i386/amd64-mpx.dat: Regenerate.
7294         * regformats/i386/i386-mpx-linux.dat: Regenerate.
7295         * regformats/i386/i386-mpx.dat: Regenerate.
7296
7297 2016-04-16  Walfred Tedeschi  <walfred.tedeschi@intel.com>
7298
7299         * amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
7300         New include.
7301         (amd64_linux_core_read_description): Add case for
7302          X86_XSTATE_AVX_MPX_MASK.
7303         (_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
7304         * amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
7305         * amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
7306         (amd64_target_description): Add case for  X86_XSTATE_AVX_MPX_MASK.
7307         (_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
7308         * common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
7309         (X86_XSTATE_AVX_MPX_MASK): New case.
7310         * features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
7311         (i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
7312         (i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
7313         (i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
7314         New expedites.
7315         * i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
7316         include.
7317         (i386_linux_core_read_description): Add case
7318         X86_XSTATE_AVX_MPX_MASK.
7319         (_initialize_i386_linux_tdep): Call
7320         initialize_tdesc_i386_avx_mpx_linux.
7321         * i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
7322         * i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
7323         (i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
7324         * x86-linux-nat.c (x86_linux_read_description): Add case for
7325         X86_XSTATE_AVX_MPX_MASK.
7326         * features/i386/amd64-avx-mpx-linux.xml: New file.
7327         * features/i386/i386-avx-mpx-linux.xml: New file.
7328         * features/i386/i386-avx-mpx.xml: New file.
7329         * features/i386/amd64-avx-mpx.xml: New file.
7330         * features/i386/amd64-avx-mpx-linux.c: Generated.
7331         * features/i386/amd64-avx-mpx.c: Generated.
7332         * features/i386/i386-avx-mpx-linux.c: Generated.
7333         * features/i386/i386-avx-mpx.c: Generated.
7334         * regformats/i386/amd64-avx-mpx-linux.dat: Generated.
7335         * regformats/i386/amd64-avx-mpx.dat: Generated.
7336         * regformats/i386/i386-avx-mpx-linux.dat: Generated.
7337         * regformats/i386/i386-avx-mpx.dat: Generated.
7338
7339 2016-04-18  Pedro Alves  <palves@redhat.com>
7340
7341         * ptrace.m4 (GDB_AC_PTRACE): Don't run tests in C++ mode.
7342         * configure: Regenerate.
7343
7344 2016-04-18  Martin Galvan  <martin.galvan@tallertechnologies.com>
7345
7346         * valops.c (value_addr): For C++ references, set the copied value's
7347         enclosing_type as well.
7348
7349 2016-04-18  Yao Qi  <yao.qi@linaro.org>
7350
7351         Revert:
7352         2016-04-15  Yao Qi  <yao.qi@linaro.org>
7353
7354         * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
7355         PC is far from the end of function.
7356
7357 2016-04-16  Pedro Alves  <palves@redhat.com>
7358
7359         * ada-exp.y (yydefred): Define as ada_yydefred.
7360
7361 2016-04-15  Pedro Alves  <palves@redhat.com>
7362
7363         * ada-lang.c (ada_lookup_struct_elt_type): Constify 'type_str' and
7364         'name_str' locals.
7365
7366 2016-04-15  Pedro Alves  <palves@redhat.com>
7367
7368         * btrace.c (pt_btrace_insn_flags): Change return type to
7369         btrace_insn_flags.  Use btrace_insn_flags for local.
7370
7371 2016-04-15  Pedro Alves  <palves@redhat.com>
7372
7373         * nat/linux-ptrace.h [__mips__] (GDB_ARCH_IS_TRAP_BRKPT): Also
7374         accept TRAP_BRKPT.
7375          [__mips__] (GDB_ARCH_IS_TRAP_HWBKPT): Also accept TRAP_HWBKPT.
7376
7377 2016-04-15  Yao Qi  <yao.qi@linaro.org>
7378
7379         * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
7380         PC is far from the end of function.
7381
7382 2016-04-14  Pedro Alves  <palves@redhat.com>
7383
7384         * cli/cli-cmds.c (alias_usage_error): New function.
7385         (alias_command): Use it.
7386         * ctf.c (ctf_save_metadata_header): Inline metadata_fmt local in
7387         ctf_save_write_metadata call.
7388
7389 2016-04-14  Pedro Alves  <palves@redhat.com>
7390
7391         * ada-typeprint.c (print_fixed_point_type): Don't pass float as
7392         argument to function expecting LONGEST.
7393         * value.c (unpack_long): Add casts to LONGEST.
7394
7395 2016-04-13  Luis Machado  <lgustavo@codesourcery.com>
7396
7397         * exec.c (exec_file_locate_attach): Guard a couple functions
7398         that can throw errors.
7399         (exception_print_same): New helper function.
7400
7401 2016-04-13  Pedro Alves  <palves@redhat.com>
7402
7403         PR remote/19840
7404         * remote.c (struct remote_state) <last_resume_exec_dir>: New
7405         field.
7406         (new_remote_state): Default last_resume_exec_dir to EXEC_FORWARD.
7407         (remote_open_1): Reset last_resume_exec_dir to EXEC_FORWARD.
7408         (remote_resume): Store the last execution direction.
7409         (remote_execution_direction): New function.
7410         (init_remote_ops): Install it as to_execution_direction target_ops
7411         method.
7412
7413 2016-04-12  Pedro Alves  <palves@redhat.com>
7414
7415         * common/common-exceptions.h (GDB_XCPT_TRY): Update comment.
7416         [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.
7417
7418 2016-04-12  Pedro Alves  <palves@redhat.com>
7419
7420         * common/common-exceptions.c (struct catcher) <buf>: Now a
7421         'jmp_buf' instead of SIGJMP_BUF.
7422         (exceptions_state_mc_init): Change return type to 'jmp_buf'.
7423         (throw_exception): Use longjmp instead of SIGLONGJMP.
7424         * common/common-exceptions.h: Include <setjmp.h> instead of
7425         "gdb_setjmp.h".
7426         (exceptions_state_mc_init): Change return type to 'jmp_buf'.
7427         [GDB_XCPT == GDB_XCPT_SJMP] (TRY): Use setjmp instead of
7428         SIGSETJMP.
7429         * cp-support.c: Include "gdb_setjmp.h".
7430
7431 2016-04-12  Pedro Alves  <palves@redhat.com>
7432
7433         * common/common-exceptions.c (exception_rethrow): Remove
7434         prepare_to_throw_exception call.
7435         * common/common-exceptions.h (prepare_to_throw_exception): Delete
7436         declaration.
7437         * exceptions.c (prepare_to_throw_exception): Delete.
7438
7439 2016-04-12  Pedro Alves  <palves@redhat.com>
7440
7441         * target.c (target_check_pending_interrupt): Delete.
7442         * target.h (struct target_ops) <to_check_pending_interrupt>:
7443         Remove method.
7444         (target_check_pending_interrupt): Remove declaration.
7445         * target-delegates.c: Regenerate.
7446
7447 2016-04-12  Pedro Alves  <palves@redhat.com>
7448
7449         * defs.h: Update comments on SIGINT handling.
7450         (immediate_quit): Delete declaration.
7451         * event-loop.c (call_async_signal_handler): Delete.
7452         * event-loop.h (call_async_signal_handler): Delete declaration.
7453         (mark_async_signal_handler): Update comments.
7454         (gdb_call_async_signal_handler): Delete declaration.
7455         * event-top.c (handle_sigint): Call mark_async_signal_handler
7456         instead of gdb_call_async_signal_handler.
7457         * exceptions.c (prepare_to_throw_exception): Remove reference to
7458         immediate_quit.
7459         (exception_fprintf): Remove comments about immediate_quit.
7460         * mingw-hdep.c (sigint_event, sigint_handler): Delete.
7461         (gdb_select): Don't wait on sigint_event.
7462         (gdb_call_async_signal_handler): Delete.
7463         (_initialize_mingw_hdep): Delete.
7464         * posix-hdep.c (gdb_call_async_signal_handler): Delete.
7465         * utils.c (immediate_quit): Delete.
7466
7467 2016-04-12  Pedro Alves  <palves@redhat.com>
7468
7469         * defs.h (quit_handler_ftype, quit_handler)
7470         (make_cleanup_override_quit_handler, default_quit_handler): New.
7471         (QUIT): Adjust comments.
7472         * event-top.c (default_quit_handler): New function.
7473         (quit_handler): New global.
7474         (struct quit_handler_cleanup_data): New.
7475         (restore_quit_handler, restore_quit_handler_dtor)
7476         (make_cleanup_override_quit_handler): New.
7477         (async_request_quit): Call QUIT.
7478         * remote.c (struct remote_state) <got_ctrlc_during_io>: New field.
7479         (async_sigint_remote_twice_token, async_sigint_remote_token):
7480         Delete.
7481         (remote_close): Update comments.
7482         (remote_start_remote): Don't set immediate_quit.  Set starting_up
7483         earlier.
7484         (remote_serial_quit_handler, remote_unpush_and_throw): New
7485         functions.
7486         (remote_open_1): Clear got_ctrlc_during_io.  Set
7487         remote_async_terminal_ours_p unconditionally.
7488         (async_initialize_sigint_signal_handler)
7489         (async_handle_remote_sigint, async_handle_remote_sigint_twice)
7490         (remote_check_pending_interrupt, async_remote_interrupt)
7491         (async_remote_interrupt_twice)
7492         (async_cleanup_sigint_signal_handler, ofunc)
7493         (sync_remote_interrupt, sync_remote_interrupt_twice): Delete.
7494         (remote_terminal_inferior, remote_terminal_ours): Remove async
7495         checks.
7496         (remote_wait_as): Don't install a SIGINT handler in sync mode.
7497         (readchar, remote_serial_write): Override the quit handler with
7498         remote_serial_quit_handler.
7499         (getpkt_or_notif_sane_1): Don't call QUIT.
7500         (initialize_remote_ops): Don't install
7501         remote_check_pending_interrupt.
7502         (_initialize_remote): Don't create async_sigint_remote_token and
7503         async_sigint_remote_twice_token.
7504         * ser-base.c (ser_base_wait_for): Call QUIT and use
7505         interruptible_select.
7506         (ser_base_write): Call QUIT.
7507         * ser-go32.c (dos_readchar, dos_write): Call QUIT.
7508         * ser-unix.c (wait_for): Don't use VTIME.  Always take the
7509         gdb_select path, but call QUIT and interruptible_select.
7510         * utils.c (maybe_quit): Call the current quit handler.  Don't call
7511         target_check_pending_interrupt.
7512         (defaulted_query, prompt_for_continue): Override the quit handler
7513         with the default quit handler.
7514
7515 2016-04-12  Pedro Alves  <palves@redhat.com>
7516
7517         * tui/tui-hooks.c (tui_target_has_run): Delete.
7518         (tui_about_to_proceed): Delete.
7519         (tui_about_to_proceed_observer): Delete.
7520         (tui_install_hooks, tui_remove_hooks): Don't install/remove an
7521         about_to_proceed observer.
7522
7523 2016-04-12  Pedro Alves  <palves@redhat.com>
7524
7525         * mi/mi-interp.c (mi_new_thread): Put
7526         target_terminal_ours_for_output in effect while outputting.
7527         (mi_thread_exit): Use target_terminal_ours_for_output instead of
7528         target_terminal_ours.
7529         (mi_record_changed, mi_inferior_added, mi_inferior_appeared)
7530         (mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed)
7531         (mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
7532         (mi_breakpoint_created, mi_breakpoint_deleted)
7533         (mi_breakpoint_modified, mi_solib_loaded, mi_solib_unloaded)
7534         (mi_command_param_changed, mi_memory_changed)
7535         (report_initial_inferior): Use target_terminal_ours_for_output
7536         instead of target_terminal_ours.  Restore terminal settings.
7537         * mi/mi-main.c (mi_execute_command): Use
7538         target_terminal_ours_for_output instead of target_terminal_ours.
7539         Restore terminal settings.
7540
7541 2016-04-12  Pedro Alves  <palves@redhat.com>
7542
7543         PR gdb/19828
7544         * gnu-nat.c (inf_validate_task_sc): Don't call
7545         target_terminal_ours / target_terminal_inferior around query.
7546         * i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
7547         call target_terminal_ours / target_terminal_inferior around
7548         yquery.
7549         * linux-record.c (record_linux_system_call): Don't call
7550         target_terminal_ours / target_terminal_inferior around yquery.
7551         * nto-procfs.c (interrupt_query): Don't call target_terminal_ours
7552         / target_terminal_inferior around query.
7553         * record-full.c (record_full_check_insn_num): Remove
7554         'set_terminal' parameter.  Don't call target_terminal_ours /
7555         target_terminal_inferior around query.
7556         (record_full_message, record_full_registers_change)
7557         (record_full_xfer_partial): Adjust.
7558         * remote.c (interrupt_query): Don't call target_terminal_ours /
7559         target_terminal_inferior around query.
7560         * utils.c (defaulted_query): Install cleanup to restore target
7561         terminal.  Put target_terminal_ours_for_output in effect while
7562         defaulted producing, and target_terminal_ours in in effect while
7563         handling input.
7564         (prompt_for_continue): Install cleanup to restore target terminal.
7565         Put target_terminal_ours in in effect while handling input.
7566
7567 2016-04-12  Pedro Alves  <palves@redhat.com>
7568
7569         * utils.c (defaulted_query, prompt_for_continue): Free temporary
7570         strings with cleanups, instead of xfree.
7571
7572 2016-04-12  Pedro Alves  <palves@redhat.com>
7573
7574         * utils.c (vwarning, internal_vproblem): Use
7575         make_cleanup_restore_target_terminal and
7576         target_terminal_ours_for_output.
7577
7578 2016-04-12  Pedro Alves  <palves@redhat.com>
7579
7580         * infcmd.c (post_create_inferior, prepare_one_step): Use
7581         target_terminal_ours_for_output instead of target_terminal_ours.
7582
7583 2016-04-12  Pedro Alves  <palves@redhat.com>
7584
7585         * exceptions.c (print_flush): Use target_terminal_ours_for_output
7586         instead of target_terminal_ours, and restore target terminal with
7587         a cleanup.
7588
7589 2016-04-12  Pedro Alves  <palves@redhat.com>
7590
7591         * cp-support.c (gdb_demangle): Use target_terminal_ours_for_output
7592         instead of target_terminal_ours, and restore target terminal with
7593         a cleanup.
7594
7595 2016-04-12  Pedro Alves  <palves@redhat.com>
7596
7597         * ada-lang.c (type_as_string, type_as_string_and_cleanup): New
7598         functions.
7599         (ada_lookup_struct_elt_type): Use type_as_string_and_cleanup.
7600
7601 2016-04-12  Pedro Alves  <palves@redhat.com>
7602
7603         * ser-base.c (fd_event): Retry read_prim on EINTR.
7604         (do_ser_base_readchar): Retry read_prim on EINTR.
7605         (ser_base_write): Retry write_prim on EINTR.
7606         * ser-unix.c (ser_unix_read_prim): Don't retry on EINTR here.
7607         (ser_unix_write_prim): Remove comment.
7608
7609 2016-04-12  Pedro Alves  <palves@redhat.com>
7610
7611         * remote.c (remote_pass_ctrlc): New function.
7612         (init_remote_ops): Install it.
7613         * target.c (target_terminal_inferior): Pass pending Ctrl-C to the
7614         target.
7615         (target_pass_ctrlc, default_target_pass_ctrlc): New functions.
7616         * target.h (struct target_ops) <to_pass_ctrlc>: New method.
7617         (target_pass_ctrlc, default_target_pass_ctrlc): New declarations.
7618         * target-delegates.c: Regenerate.
7619
7620 2016-04-12  Pedro Alves  <palves@redhat.com>
7621
7622         * infcmd.c (interrupt_target_1): Call target_stop is in non-stop
7623         mode.
7624         * linux-nat.c (linux_nat_interrupt): Delete.
7625         (linux_nat_add_target): Don't install linux_nat_interrupt.
7626         * remote.c (remote_interrupt_ns): Change return type to void.
7627         Throw error if interrupting the target is not supported.
7628         (remote_interrupt): Don't call the remote_stop_ns/remote_stop_as.
7629
7630 2016-04-12  Pedro Alves  <palves@redhat.com>
7631
7632         * defs.h (clear_quit_flag): Remove declaration.
7633         * extension-priv.h (struct extension_language_ops)
7634         <clear_quit_flag>: Remove field and update comments.
7635         * extension.c (clear_quit_flag): Delete.
7636         * guile/guile.c (guile_extension_ops): Adjust.
7637         * python/python.c (python_extension_ops): Adjust.
7638         (gdbpy_clear_quit_flag): Delete.
7639
7640 2016-04-12  Pedro Alves  <palves@redhat.com>
7641
7642         * main.c (captured_main): Don't clear the quit flag.
7643
7644 2016-04-12  Pedro Alves  <palves@redhat.com>
7645
7646         * exceptions.c (prepare_to_throw_exception): Don't clear the quit
7647         flag.
7648
7649 2016-04-12  Pedro Alves  <palves@redhat.com>
7650
7651         * event-top.c (command_handler): Don't call clear_quit_flag.
7652
7653 2016-04-12  Pedro Alves  <palves@redhat.com>
7654
7655         * remote-sim.c (gdb_os_poll_quit): Don't call clear_quit_flag.
7656         * remote.c (remote_wait_as): Don't call clear_quit_flag.
7657
7658 2016-04-12  Pedro Alves  <palves@redhat.com>
7659
7660         * python/python.c: Include "ser-event.h".
7661         (gdbpy_event_fds): Delete.
7662         (gdbpy_serial_event): New.
7663         (gdbpy_run_events): Change prototype.  Use serial_event_clear
7664         instead of serial_readchar.
7665         (gdbpy_post_event): Use serial_event_set instead of serial_write.
7666         (gdbpy_initialize_events): Use make_serial_event instead of
7667         serial_pipe.
7668
7669 2016-04-12  Pedro Alves  <palves@redhat.com>
7670
7671         * defs.h: Extend QUIT-related comments to mention
7672         interruptible_select.
7673         (quit_serial_event_set, quit_serial_event_clear): Declare.
7674         * event-top.c: Include "ser-event.h" and "gdb_select.h".
7675         (quit_serial_event): New global.
7676         (async_init_signals): Make quit_serial_event.
7677         (quit_serial_event_set, quit_serial_event_clear)
7678         (quit_serial_event_fd, interruptible_select): New functions.
7679         * extension.c (set_quit_flag): Set the quit serial event.
7680         (check_quit_flag): Clear the quit serial event.
7681         * gdb_select.h (interruptible_select): New declaration.
7682         * guile/scm-ports.c (ioscm_input_waiting): Use
7683         interruptible_select instead of gdb_select.
7684         * top.c (gdb_readline_no_editing): Likewise.
7685         * ui-file.c (stdio_file_read): Likewise.
7686
7687 2016-04-12  Pedro Alves  <palves@redhat.com>
7688
7689         * event-loop.c: Include "ser-event.h".
7690         (async_signal_handlers_serial_event): New global.
7691         (async_signals_handler, initialize_async_signal_handlers): New
7692         functions.
7693         (mark_async_signal_handler): Set
7694         async_signal_handlers_serial_event.
7695         (invoke_async_signal_handlers): Clear
7696         async_signal_handlers_serial_event.
7697         * event-top.c (async_init_signals): Call
7698         initialize_async_signal_handlers.
7699
7700 2016-04-12  Pedro Alves  <palves@redhat.com>
7701
7702         * Makefile.in (SFILES): Add ser-event.c.
7703         (HFILES_NO_SRCDIR): Add ser-event.h.
7704         (COMMON_OBS): Add ser-event.o.
7705         * ser-event.c, ser-event.h: New files.
7706         * serial.c (new_serial): New function, factored out from
7707         (serial_fdopen_ops): ... this.
7708         (serial_open_ops_1): New function, factored out from
7709         (serial_open): ... this.
7710         (serial_open_ops): New function.
7711         * serial.h (struct serial): Forware declare.
7712         (serial_open_ops): New declaration.
7713
7714 2016-04-12  Pedro Alves  <palves@redhat.com>
7715
7716         * serial.c (serial_open, serial_fdopen_ops, do_serial_close):
7717         Remove references to name.
7718         * serial.h (struct serial) <name>: Delete.
7719
7720 2016-04-12  Pedro Alves  <palves@redhat.com>
7721
7722         * remote-fileio.c (sigint_fileio_token, remote_fio_no_longjmp):
7723         Delete.
7724         (async_remote_fileio_interrupt): Delete.
7725         (remote_fileio_ctrl_c_signal_handler): Don't call the async signal
7726         handler.  Instead just always set the ctrl_c flag.
7727         (remote_fileio_reply): Clear remote_fio_ctrl_c_flag before
7728         re-enabling the SIGINT handler.
7729         (remote_fileio_func_open, remote_fileio_func_close)
7730         (remote_fileio_func_read, remote_fileio_func_write)
7731         (remote_fileio_func_lseek, remote_fileio_func_rename)
7732         (remote_fileio_func_unlink, remote_fileio_func_stat)
7733         (remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
7734         (remote_fileio_func_isatty, remote_fileio_func_system)
7735         (remote_fileio_request): Remove references to
7736         remote_fio_no_longjmp.
7737         (initialize_remote_fileio): Don't create an async signal handler.
7738
7739 2016-04-12  Pedro Alves  <palves@redhat.com>
7740
7741         * event-top.c (stdin_event_handler): Call QUIT;
7742         (prompt_for_continue): Don't run with immediate_quit set.
7743
7744 2016-04-12  Pedro Alves  <palves@redhat.com>
7745
7746         * tui/tui-io.c (tui_redisplay_readline): Check
7747         gdb_in_secondary_prompt_p instead of immediate_quit.
7748         * tui/tui.c: Include top.h.
7749         (tui_rl_startup_hook): Check gdb_in_secondary_prompt_p instead of
7750         immediate_quit.
7751
7752 2016-04-12  Pedro Alves  <palves@redhat.com>
7753
7754         * top.c (read_command_file): Inline command_loop here.
7755         (command_loop): Delete.
7756
7757 2016-04-12  Pedro Alves  <palves@redhat.com>
7758
7759         * top.c: Include "gdb_select.h".
7760         (gdb_readline_no_editing): Wait for input with gdb_select instead
7761         of blocking in fgetc.
7762         (command_line_input): Don't set immediate_quit.
7763
7764 2016-04-08  Martin Galvan  <martin.galvan@tallertechnologies.com>
7765
7766         * value.c (value_next): Make pass-by-reference parameters const-correct.
7767         (value_parent): Likewise.
7768         (value_enclosing_type): Likewise.
7769         (value_lazy): Likewise.
7770         (value_stack): Likewise.
7771         (value_embedded_offset): Likewise.
7772         (value_pointed_to_offset): Likewise.
7773         (value_raw_address): Likewise.
7774         (deprecated_value_modifiable): Likewise.
7775         (value_free_to_mark): Likewise.
7776         (value_release_to_mark): Likewise.
7777         (internalvar_name): Likewise.
7778         (readjust_indirect_value_type): Likewise.
7779         (value_initialized): Likewise.
7780         * value.h (value_next): Likewise.
7781         (value_parent): Likewise.
7782         (value_enclosing_type): Likewise.
7783         (value_lazy): Likewise.
7784         (value_stack): Likewise.
7785         (value_embedded_offset): Likewise.
7786         (value_pointed_to_offset): Likewise.
7787         (value_raw_address): Likewise.
7788         (deprecated_value_modifiable): Likewise.
7789         (value_free_to_mark): Likewise.
7790         (value_release_to_mark): Likewise.
7791         (internalvar_name): Likewise.
7792         (readjust_indirect_value_type): Likewise.
7793         (value_initialized): Likewise.
7794
7795 2016-04-07  Yao Qi  <yao.qi@linaro.org>
7796
7797         * record-full.c (record_full_insert_breakpoint): Return
7798         early if entry on the address is found in
7799         record_full_breakpoints.
7800
7801 2016-04-07  Yao Qi  <yao.qi@linaro.org>
7802
7803         * record-full.c (record_full_insert_breakpoint): Set
7804         bp_tgt->reqstd_address and bp_tgt->placed_size.
7805
7806 2016-04-06  Don Breazeal  <donb@codesourcery.com>
7807
7808         * value.c (value_actual_type): Don't try to get rtti type
7809         of the value if it has been optimized out.
7810         (value_optimized_out): If a memory access error occurs,
7811         just check vaue->optimized_out.
7812
7813 2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
7814
7815         Revert the previous commit adding unknown_v_replies_ok.
7816
7817 2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
7818
7819         * remote.c (struct remote_state): New field unknown_v_replies_ok.
7820         (packet_config_support): Read it.
7821         (remote_start_remote): Set it.
7822
7823 2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
7824
7825         * remote.c: Revert check-in by a mistake in the previous commit.
7826
7827 2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
7828             Pedro Alves  <palves@redhat.com>
7829
7830         * exec.c (exec_file_locate_attach): Print warning for unsupported
7831         target_pid_to_exec_file.
7832         * symfile-mem.c (add_vsyscall_page): Remove the "file" command
7833         message part.
7834
7835 2016-04-04  Simon Marchi  <simon.marchi@ericsson.com>
7836
7837         * cli/cli-decode.c (help_cmd_list): Fix function doc and remove
7838         trailing spaces.
7839
7840 2016-04-01  Artemiy Volkov  <artemiyv@acm.org>
7841
7842         PR gdb/19820
7843         * eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
7844         the type of BINOP_REPEAT's second operand.
7845
7846 2016-03-31  Yichao Yu  <yyc1992@gmail.com>
7847
7848         PR gdb/19858
7849         * jit.c (jit_breakpoint_re_set_internal): Return 0 if we already
7850         got the breakpoint at the right address.
7851         (jit_inferior_created): New function.
7852         (_initialize_jit): Install jit_inferior_created as
7853         inferior_created observer.
7854
7855 2016-03-31  Marcin Kościelnicki  <koriakin@0x04.net>
7856
7857         * NEWS: Mention support for tracepoints on powerpc*-linux.
7858
7859 2016-03-31  Catalin Udma  <catalin.udma@freescale.com>
7860
7861         PR python/19743
7862         * python/python.c (execute_gdb_command): Use console uiout
7863         when executing gdb command.
7864         * utils.c (restore_ui_out_closure): New structure.
7865         (do_restore_ui_out): New function.
7866         (make_cleanup_restore_ui_out): Likewise.
7867         * utils.h (make_cleanup_restore_ui_out): Declare.
7868
7869 2016-03-31  Pedro Alves  <palves@redhat.com>
7870
7871         * NEWS: Mention that support for "target m32rsdi", "target mips",
7872         "target pmon", "target ddb", "target rockhopper", and "target lsi"
7873         was removed.
7874         * Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
7875         remote-mips.o.
7876         (ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
7877         * configure.tgt: Remove all references to remote-m32r-sdi.o and
7878         remote-mips.o.
7879         * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
7880         function.
7881         * mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
7882         declaration.
7883         * remote-m32r-sdi.c, remote-mips.c: Delete files.
7884         * symfile.c (generic_load, generic_load): Remove comments.
7885
7886 2016-03-30  Yao Qi  <yao.qi@linaro.org>
7887
7888         * arm-tdep.c (arm_epilogue_frame_this_id): Check 'func' against
7889         0 rather than NULL.
7890
7891 2016-03-30  Yao Qi  <yao.qi@linaro.org>
7892
7893         * arm-tdep.c: (arm_make_epilogue_frame_cache): New function.
7894         (arm_epilogue_frame_this_id): New function.
7895         (arm_epilogue_frame_prev_register): New function.
7896         (arm_epilogue_frame_sniffer): New function.
7897         (arm_epilogue_frame_unwind): New.
7898         (arm_gdbarch_init): Append unwinder arm_epilogue_frame_unwind.
7899
7900 2016-03-30  Yao Qi  <yao.qi@linaro.org>
7901
7902         * arm-tdep.c (arm_stack_frame_destroyed_p): Rename it ...
7903         (arm_stack_frame_destroyed_p_1): ... here.  Don't call
7904         arm_pc_is_thumb.
7905         (arm_stack_frame_destroyed_p): Call
7906         thumb_stack_frame_destroyed_p and
7907         arm_stack_frame_destroyed_p_1.
7908
7909 2016-03-30  Doug Evans  <dje@google.com>
7910
7911         * python/py-utils.c (host_string_to_python_string): New function.
7912         * python/python-internal.h (host_string_to_python_string): Declare it.
7913         * python/py-*.c (*): Update all calls to
7914         PyString_Decode (str, strlen (str), host_charset (), NULL);
7915         to use host_string_to_python_string instead.
7916
7917 2016-03-30  Marcin Kościelnicki  <koriakin@0x04.net>
7918
7919         * remote.c (remote_check_symbols): Allocate own buffer for reply.
7920
7921 2016-03-29  Max Filippov  <jcmvbkbc@gmail.com>
7922
7923         * xtensa-tdep.c (xtensa_frame_cache): Change op1 type to LONGEST.
7924         Use safe_read_memory_integer instead of read_memory_integer.
7925
7926 2016-03-29  Marcin Kościelnicki  <koriakin@0x04.net>
7927
7928         * NEWS: Mention support for tracepoints on s390*-linux.
7929
7930 2016-03-29  Don Breazeal  <donb@codesourcery.com>
7931
7932         * gdb/value.c (value_actual_type): Fix formatting issue.
7933
7934 2016-03-23  Yao Qi  <yao.qi@linaro.org>
7935
7936         * gdbarch.sh (software_single_step): Remove comments.
7937         * gdbarch.h: Regenerated.
7938
7939 2016-03-21  Yao Qi  <yao.qi@linaro.org>
7940
7941         * arm-tdep.c (arm_record_media): New.
7942         (arm_record_ld_st_reg_offset): Call arm_record_media.
7943
7944 2016-03-21  Yao Qi  <yao.qi@linaro.org>
7945
7946         * arm-linux-tdep.c (arm_canonicalize_syscall): Canonicalize
7947         more syscalls.
7948
7949 2016-03-18  Yao Qi  <yao.qi@linaro.org>
7950
7951         * sparc-tdep.c (sparc_software_single_step): Make it static.
7952         * sparc-tdep.h (sparc_software_single_step): Remove declaration.
7953
7954 2016-03-18  Yao Qi  <yao.qi@linaro.org>
7955
7956         * spu-tdep.c (spu_software_single_step): Throw error when
7957         target_read_memory fails.
7958
7959 2016-03-17  Jan Kratochvil  <jan.kratochvil@redhat.com>
7960
7961         * linux-thread-db.c (check_pid_namespace_match): Extend the message.
7962
7963 2016-03-17  Pedro Alves  <palves@redhat.com>
7964             Don Breazeal  <donb@codesourcery.com>
7965
7966         PR remote/19496
7967         * infcmd.c (notice_new_inferior): Use the 'leave_running' argument
7968         instead of checking the 'non_stop' global.
7969         * remote.c (remote_add_thread): New parameter 'executing'.  Use it
7970         to set the new thread's executing state.
7971         (remote_notice_new_inferior): Rename parameter 'running' to
7972         'executing'.  Always set the thread state to THREAD_RUNNING in
7973         non-stop mode, and to THREAD_STOPPED in all-stop mode.  Pass
7974         EXECUTING to remote_add_thread and notice_new_inferior.
7975         (remote_update_thread_list): Update to pass executing state, not
7976         running state.
7977
7978 2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>
7979
7980         * syscalls/s390-linux.xml: Add NUMA syscalls and new syscalls up
7981         to 374.
7982         * syscalls/s390x-linux.xml: Likewise.
7983
7984 2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>
7985
7986         * linux-record.c (record_mem_at_reg): New helper function.
7987         (record_linux_system_call): Exploit new helper function where
7988         applicable.
7989
7990 2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>
7991
7992         * linux-record.c: Fix whitespace issues; tabify, remove trailing
7993         spaces.
7994
7995 2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>
7996
7997         * linux-record.c (record_linux_system_call): Add missing return
7998         statements to handling of pipe and pipe2 syscalls.
7999
8000 2016-03-16  Doug Evans  <dje@google.com>
8001
8002         * xml-tdesc.c (tdesc_start_enum): Fix c++ build.
8003
8004 2016-03-16  Yao Qi  <yao.qi@linaro.org>
8005
8006         * arm-linux-tdep.c (arm_linux_init_abi): Fix
8007         arm_linux_record_tdep.arg1, arm_linux_record_tdep.arg2 and
8008         arm_linux_record_tdep.arg3.  Set arm_linux_record_tdep.arg4,
8009         arm_linux_record_tdep.arg5, arm_linux_record_tdep.arg6, and
8010         arm_linux_record_tdep.arg7.
8011
8012 2016-03-15  Keith Seitz  <keiths@redhat.com>
8013
8014         PR breakpoints/18303
8015         * cp-namespace.c (cp_lookup_bare_symbol): Change assertion to
8016         look for "::" instead of simply ":".
8017         (cp_search_static_and_baseclasses): Return null_block_symbol for
8018         malformed input.
8019         Remove assertions.
8020         * cp-support.c (cp_find_first_component_aux): Do not return
8021         a prefix length for ':' unless the next character is also ':'.
8022
8023 2016-03-15  Doug Evans  <dje@google.com>
8024
8025         * features/aarch64-core.xml (cpsr_flags): New flags type.
8026         (cpsr): Use it.
8027         * features/aarch64.c: Regenerate.
8028
8029 2016-03-15  Doug Evans  <dje@google.com>
8030
8031         * features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
8032         * features/i386/32bit-sse.xml (i386_eflags): Ditto.
8033         * features/i386/64bit-core.xml (i386_eflags): Ditto.
8034         * features/i386/64bit-sse.xml (i386_eflags): Ditto.
8035         * features/i386/x32-core.xml (i386_eflags): Ditto.
8036
8037 2016-03-15  Doug Evans  <dje@google.com>
8038             Wei-cheng Wang  <cole945@gmail.com>
8039
8040         Extend flags to support multibit and enum bitfields.
8041         * NEWS: Document new features.
8042         * c-typeprint.c (c_type_print_varspec_prefix): Handle TYPE_CODE_FLAGS.
8043         (c_type_print_varspec_suffix, c_type_print_base): Ditto.
8044         * gdbtypes.c (arch_flags_type): Don't assume all fields are one bit.
8045         (append_flags_type_field): New function.
8046         (append_flags_type_flag): Call it.
8047         * gdbtypes.h (append_flags_type_field): Declare.
8048         * target-descriptions.c (struct tdesc_type_flag): Delete.
8049         (enum tdesc_type_kind) <TDESC_TYPE_BOOL>: New enum value.
8050         (enum tdesc_type_kind) <TDESC_TYPE_ENUM>: Ditto.
8051         (struct tdesc_type) <u.f>: Delete.
8052         (tdesc_predefined_types): Add "bool".
8053         (tdesc_predefined_type): New function.
8054         (tdesc_gdb_type): Handle TDESC_TYPE_BOOL, TDESC_TYPE_ENUM.
8055         Update TDESC_TYPE_FLAGS support.
8056         (tdesc_free_type): Handle TDESC_TYPE_ENUM.  Update TDESC_TYPE_FLAGS.
8057         (tdesc_create_flags): Update.
8058         (tdesc_create_enum): New function.
8059         (tdesc_add_field): Initialize start,end to -1.
8060         (tdesc_add_typed_bitfield): New function.
8061         (tdesc_add_bitfield): Call it.
8062         (tdesc_add_flag): Allow TDESC_TYPE_STRUCT.  Update.
8063         (tdesc_add_enum_value): New function.
8064         (maint_print_c_tdesc_cmd): Fold TDESC_TYPE_FLAGS support into
8065         TDESC_TYPE_STRUCT.  Handle TDESC_TYPE_ENUM.
8066         * target-descriptions.h (tdesc_create_enum): Declare.
8067         (tdesc_add_typed_bitfield, tdesc_add_enum_value): Declare.
8068         * valprint.c (generic_val_print_enum_1): New function.
8069         (generic_val_print_enum): Call it.
8070         (val_print_type_code_flags): Make static.  Handle multibit bitfields
8071         and enum bitfields.
8072         * valprint.h (val_print_type_code_flags): Delete.
8073         * xml-tdesc.c (struct tdesc_parsing_data) <current_type_is_flags>:
8074         Delete.  All uses removed.
8075         (tdesc_start_enum): New function.
8076         (tdesc_start_field): Handle multibit and enum bitfields.
8077         (tdesc_start_enum_value): New function.
8078         (enum_value_attributes, enum_children, enum_attributes): New static
8079         globals.
8080         (feature_children): Add "enum".
8081         * features/gdb-target.dtd (enum, evalue): New elements.
8082
8083 2016-03-15  Doug Evans  <dje@google.com>
8084
8085         * target-descriptions.c (struct tdesc_type) <u.u.size>: Change type
8086         from LONGEST to int.
8087         (struct tdesc_type) <u.f.size>: Ditto.
8088         (tdesc_set_struct_size): Change type of "size" arg from LONGEST
8089         to int.  Add assertion size > 0.
8090         (tdesc_create_flags): Ditto.
8091         * target-descriptions.h (tdesc_set_struct_size): Update.
8092         (tdesc_create_flags): Update.
8093         * xml-tdesc.c (MAX_FIELD_SIZE, MAX_FIELD_BITSIZE): New macros.
8094         (MAX_VECTOR_SIZE): New macro.
8095         (tdesc_start_struct): Catch conversion errors from LONGEST to int.
8096         (tdesc_start_flags, tdesc_start_field, tdesc_start_vector): Ditto.
8097
8098 2016-03-15  Doug Evans  <dje@google.com>
8099
8100         * target-descriptions.c (maint_print_c_tdesc_cmd): Use "type" for
8101         TYPE_CODE_FLAGS instead of "field_type", for consistency.
8102         * features/i386/amd64-avx-linux.c: Regenerate.
8103         * features/i386/amd64-avx.c: Regenerate.
8104         * features/i386/amd64-avx512-linux.c: Regenerate.
8105         * features/i386/amd64-avx512.c: Regenerate.
8106         * features/i386/amd64-linux.c: Regenerate.
8107         * features/i386/amd64-mpx-linux.c: Regenerate.
8108         * features/i386/amd64-mpx.c: Regenerate.
8109         * features/i386/amd64.c: Regenerate.
8110         * features/i386/i386-avx-linux.c: Regenerate.
8111         * features/i386/i386-avx.c: Regenerate.
8112         * features/i386/i386-avx512-linux.c: Regenerate.
8113         * features/i386/i386-avx512.c: Regenerate.
8114         * features/i386/i386-linux.c: Regenerate.
8115         * features/i386/i386-mmx-linux.c: Regenerate.
8116         * features/i386/i386-mmx.c: Regenerate.
8117         * features/i386/i386-mpx-linux.c: Regenerate.
8118         * features/i386/i386-mpx.c: Regenerate.
8119         * features/i386/i386.c: Regenerate.
8120         * features/i386/x32-avx-linux.c: Regenerate.
8121         * features/i386/x32-avx.c: Regenerate.
8122         * features/i386/x32-avx512-linux.c: Regenerate.
8123         * features/i386/x32-avx512.c: Regenerate.
8124         * features/i386/x32-linux.c: Regenerate.
8125         * features/i386/x32.c: Regenerate.
8126
8127 2016-03-15  Pedro Alves  <palves@redhat.com>
8128
8129         PR gdb/19676
8130         * linux-thread-db.c (try_thread_db_load_1): Leave
8131         info->td_ta_thr_iter_p NULL iff debugging a live process and we
8132         have /proc access.
8133         (find_new_threads_once): Assert that we have a non-NULL
8134         info->td_ta_thr_iter_p instead of checking whether the target has
8135         execution.
8136
8137 2016-03-15  Pedro Alves  <palves@redhat.com>
8138
8139         PR gdb/19676
8140         * infrun.c (displaced_step_prepare): Also disable displaced
8141         stepping on NOT_SUPPORTED_ERROR.
8142         * linux-tdep.c (linux_displaced_step_location): If reading auxv
8143         fails, throw NOT_SUPPORTED_ERROR instead of generic error.
8144
8145 2016-03-13  Marcin Kościelnicki  <koriakin@0x04.net>
8146
8147         * s390-linux-tdep.c (s390_gen_return_address): New function.
8148         (s390_gdbarch_init): Fill gen_return_address hook.
8149
8150 2016-03-11  Andrew Burgess  <andrew.burgess@embecosm.com>
8151
8152         * symmisc.c (maintenance_info_line_tables): New function.
8153         (maintenance_print_one_line_table): New function.
8154         (_initialize_symmisc): Register 'maint info line-table' command.
8155         * NEWS: Mention new command.
8156
8157 2016-03-11  Marcin Kościelnicki  <koriakin@0x04.net>
8158
8159         * s390-linux-tdep.c (s390_ax_pseudo_register_collect): New function.
8160         (s390_ax_pseudo_register_push_stack): New function.
8161         (s390_gdbarch_init): Fill ax_pseudo_register_collect and
8162         ax_pseudo_register_push_stack hooks.
8163
8164 2016-03-10  Simon Marchi  <simon.marchi@polymtl.ca>
8165
8166         * data-directory/Makefile.in (PYTHON_FILE_LIST): Install
8167         gdb/function/as_string.py.
8168         * python/lib/gdb/function/as_string.py: New file.
8169         * NEWS: Mention the new $_as_string function.
8170
8171 2016-03-09  Jose E. Marchesi  <jose.marchesi@oracle.com>
8172
8173         * target.h: Fix doc string of target_can_use_hardware_watchpoint.
8174
8175 2016-03-09  Pedro Alves  <palves@redhat.com>
8176
8177         * event-top.c (more_to_come): Delete.
8178         (struct readline_input_state): Delete.
8179         (readline_input_state): Delete.
8180         (get_command_line_buffer): New function.
8181         (command_handler): Update comments.  Don't handle NULL commands
8182         here.  Do not execute commented lines.
8183         (command_line_append_input_line): New function.
8184         (handle_line_of_input): New function, partly based on
8185         command_line_handler and command_line_input.
8186         (command_line_handler): Rewrite.
8187         * event-top.h (command_handler): New declaration.
8188         (command_loop): Defer command execution to command_handler.
8189         (command_line_input): Update comments.  Simplify, using struct
8190         buffer and handle_line_of_input.
8191         * top.h (struct buffer): New forward declaration.
8192         (handle_line_of_input): New declaration.
8193
8194 2016-03-09  Pedro Alves  <palves@redhat.com>
8195
8196         * event-top.c (command_line_handler): Use xfree + xstrdup instead
8197         of xrealloc + strcpy.
8198         * main.c (captured_main): Use xstrdup instead of xmalloc plus
8199         manual clear.
8200         * top.c (saved_command_line): Rewrite comment.
8201         (saved_command_line_size): Delete.
8202         (command_line_input): Use xfree + xstrdup instead of xrealloc +
8203         strcpy.
8204         * top.h (saved_command_line_size): Delete declaration.
8205
8206 2016-03-09  Pedro Alves  <palves@redhat.com>
8207
8208         * event-top.c: Include buffer.h.
8209         (gdb_readline_no_editing_callback): Use struct buffer instead
8210         of xrealloc.
8211
8212 2016-03-09  Pedro Alves  <palves@redhat.com>
8213
8214         * common/buffer.h (buffer_grow_char): New function.
8215         * top.c: Include buffer.h.
8216         (gdb_readline_no_editing): Rename 'prompt_arg' parameter to
8217         'prompt'.  Use struct buffer instead of xrealloc.
8218
8219 2016-03-09  Pedro Alves  <palves@redhat.com>
8220
8221         * defs.h (gdb_readline): Delete declaration.
8222         * top.c (gdb_readline): Rename to ...
8223         (gdb_readline_no_editing): ... this, and make static.
8224
8225 2016-03-09  Pedro Alves  <palves@redhat.com>
8226
8227         * utils.c (prompt_for_continue): Update comments.
8228
8229 2016-03-09  Pedro Alves  <palves@redhat.com>
8230
8231         * event-top.c (async_annotation_suffix): Delete.
8232         (top_level_prompt, command_line_handler): Don't use
8233         'async_annotation_suffix' and simplify.
8234         * event-top.h (async_annotation_suffix): Delete declaration.
8235         (init_main): Remove reference to 'async_annotation_suffix'.
8236
8237 2016-03-09  Pedro Alves  <palves@redhat.com>
8238
8239         * event-top.c (gdb_readline2): Rename to ...
8240         (gdb_readline_no_editing_callback): ... this.
8241         (change_line_handler, stdin_event_handler)
8242         (gdb_setup_readline): Adjust.
8243         * event-top.h (gdb_readline2): Rename to ...
8244         (gdb_readline_no_editing_callback): ... this, and move closer to
8245         other readline-related declarations.
8246         * mi/mi-interp.c (mi_interpreter_resume): Adjust.
8247
8248 2016-03-09  Pedro Alves  <palves@redhat.com>
8249
8250         * top.c (window_hook): Delete.
8251         (command_loop): Remove references to window_hook.
8252
8253 2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>
8254
8255         * corefile.c (safe_read_memory_unsigned_integer): New function.
8256         * gdbcore.h (safe_read_memory_unsigned_integer): New prototype.
8257         * rs6000-tdep.c (rs6000_frame_cache): Read backchain as unsigned.
8258
8259 2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>
8260
8261         * rs6000-tdep.c: Add "ax.h" and "ax-gdb.h" includes.
8262         (rs6000_gen_return_address): New function.
8263         (rs6000_gdbarch_init): Wire in the above.
8264
8265 2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>
8266
8267         * rs6000-tdep.c (rs6000_ax_pseudo_register_collect): New function.
8268         (rs6000_gdbarch_init): Wire in the above.
8269
8270 2016-03-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>
8271
8272         * s390-linux-tdep.c (s390_analyze_prologue): Ignore BRC and BRCL
8273         instructions that do nothing or are conditional traps.
8274
8275 2016-03-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>
8276
8277         * s390-linux-tdep.c (s390_prologue_frame_unwind_cache): Store
8278         frame func's PC in info->func before any other failure can occur.
8279         (s390_frame_this_id): Use frame_id_build_unavailable_stack if
8280         info->func has been filled out.
8281
8282 2016-03-09  Pedro Alves  <palves@redhat.com>
8283
8284         * osabi.c (gdb_osabi_names): Avoid spaces in osabi names.
8285
8286 2016-03-09  Pedro Alves  <palves@redhat.com>
8287
8288         * frv-tdep.c (frv_gdbarch_init): Handle bfd_mach_fr300.
8289
8290 2016-03-09  Pedro Alves  <palves@redhat.com>
8291
8292         * cris-tdep.c (cris_gdbarch_init): Return 0 if the info's byte
8293         order is BFD_ENDIAN_BIG or if the cris version is unsupported.
8294
8295 2016-03-09  Pedro Alves  <palves@redhat.com>
8296
8297         * doublest.c: Extend comments.
8298         (floatformat_to_doublest, floatformat_from_doublest): Copy the
8299         floatformat's total size, not the host type's size.
8300
8301 2016-03-09  Pedro Alves  <palves@redhat.com>
8302
8303         * doublest.c (floatformat_totalsize_bytes): New function.
8304         (floatformat_from_type): Assert that the type's length is at least
8305         as long as the floatformat's totalsize.
8306         * doublest.h (floatformat_totalsize_bytes): New declaration.
8307         * gdbtypes.c (arch_float_type): Assert that the type's length is
8308         at least as long as the floatformat's totalsize.
8309
8310 2016-03-09  Pedro Alves  <palves@redhat.com>
8311
8312         * hppa-linux-tdep.c (hppa_linux_init_abi): Set the long double
8313         format to floatformats_ieee_double.
8314
8315 2016-03-07  Pedro Alves  <palves@redhat.com>
8316
8317         * mips-tdep.c (mips_gdbarch_init): Check whether info.abfd is NULL
8318         before calling bfd_get_flavour.
8319
8320 2016-03-05  Pitchumani Sivanupandi  <pitchumani.s@atmel.com>
8321
8322         * avr-tdep.c (AVR_LAST_ARG_REGNUM): Define.
8323         (avr_push_dummy_call): Correct last needed argument register.
8324         Write MSB of argument into register and subsequent bytes into
8325         other registers in decreasing order.
8326
8327 2016-03-04  Yao Qi  <yao.qi@linaro.org>
8328
8329         * arm-tdep.c (arm_record_vdata_transfer_insn): Simplify the
8330         condition check.  Record the right D register number.
8331
8332 2016-03-04  Yao Qi  <yao.qi@linaro.org>
8333
8334         * arm-tdep.c (arm_record_extension_space): Remove code
8335         printing "Process record does not support".
8336         (arm_record_data_proc_misc_ld_str): Likewise.
8337         (decode_insn): Call arm_record_extension_space if condition
8338         is 0xf.  Call arm_record_unsupported_insn if ret isn't
8339         ARM_RECORD_SUCCESS.  Use 'ret' instead of 'insn_id' to hold
8340         the value of thumb2_record_decode_insn_handler.
8341
8342 2016-03-04  Simon Marchi  <simon.marchi@ericsson.com>
8343
8344         * features/feature_to_c.sh: Print the help when passing no
8345         argument.
8346
8347 2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>
8348
8349         * MAINTAINERS (Write After Approval): Add Bernhard Heckel.
8350
8351 2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>
8352
8353         * dwarf2read.c (new_symbol_full): Fix detection of gfortran compilers.
8354
8355 2016-03-01  Andreas Arnez  <arnez@linux.vnet.ibm.com>
8356
8357         * s390-linux-tdep.c (s390_backchain_frame_unwind_cache): Avoid
8358         exception when attempting to access the inferior's backchain.
8359
8360 2016-02-29  Yao Qi  <yao.qi@linaro.org>
8361
8362         * aarch64-linux-tdep.c (aarch64_canonicalize_syscall): Support
8363         eventfd2, eventfd2, dup3, inotify_init1, fallocate and pipe2.
8364         Return gdb_sys_epoll_create1 instead of gdb_sys_epoll_create
8365         for aarch64_sys_epoll_create1.
8366
8367 2016-02-29  Yao Qi  <yao.qi@linaro.org>
8368
8369         * linux-record.h (enum gdb_syscall) <gdb_sys_fallocate>: New.
8370         <gdb_sys_eventfd2, gdb_sys_epoll_create1, gdb_sys_dup3>: New.
8371         <gdb_sys_pipe2, gdb_sys_inotify_init1>: New.
8372         * linux-record.c (record_linux_system_call): Handle them.
8373
8374 2016-02-28  Iain Buclaw  <ibuclaw@gdcproject.org>
8375
8376         * d-namespace.c (d_lookup_symbol_imports): Avoid recursive lookups from
8377         cyclic imports.
8378
8379 2016-02-26  Keith Seitz  <keiths@redhat.com>
8380
8381         * rs6000-tdep.c (rs6000_frame_cache): Explicitly cast return result
8382         to avoid invalid conversion from void *.
8383
8384 2016-02-26  Yao Qi  <yao.qi@linaro.org>
8385
8386         * arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
8387         per bit 8.  Check bit 20 instead of bit 4 for VMOV
8388         instruction.  Record D registers for instructions changing
8389         S registers.  Change of the order of length and address
8390         in record_buf_mem array.
8391
8392 2016-02-26  Yao Qi  <yao.qi@linaro.org>
8393
8394         * arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register
8395         number of Rd.
8396
8397 2016-02-25  Doug Evans  <dje@google.com>
8398
8399         * remote-m32r-sdi.c (recv_char_data): Initialize val to avoid
8400         compiler warning.
8401         (recv_long_data): Ditto.
8402
8403 2016-02-25  Simon Marchi  <simon.marchi@ericsson.com>
8404
8405         * i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
8406         Initialize variables.
8407
8408 2016-02-25  Antoine Tremblay  <antoine.tremblay@ericsson.com>
8409
8410         * ax-general.c (ax_reg): Call gdbarch_remote_register_number.
8411         (ax_reg_mask): Likewise.
8412
8413 2016-02-24  Pedro Alves  <palves@redhat.com>
8414
8415         * linux-nat.c (save_sigtrap) Delete.
8416         (stop_wait_callback): Call save_stop_reason instead of
8417         save_sigtrap.
8418         (check_stopped_by_breakpoint): Rename to ...
8419         (save_stop_reason): ... this.  Bits of save_sigtrap folded here.
8420         Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
8421         GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT.  Factor out
8422         common code between the USE_SIGTRAP_SIGINFO and
8423         !USE_SIGTRAP_SIGINFO blocks.
8424         (linux_nat_filter_event): Call save_stop_reason instead of
8425         save_sigtrap.
8426         * nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
8427         si_code for MIPS.
8428         * nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table.  Add
8429         comments on MIPS behavior.
8430         (GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.
8431
8432 2016-02-24  Marcin Kościelnicki  <koriakin@0x04.net>
8433
8434         * rs6000-tdep.c (rs6000_frame_cache): Initialize frame and pc to 0
8435         to avoid spurious warnings.
8436
8437 2016-02-24  Gary Benson  <gbenson@redhat.com>
8438
8439         * exec.c (exec_file_locate_attach): Do not attempt to
8440         locate main executable locally if not found in sysroot.
8441
8442 2016-02-24  Joel Brobecker  <brobecker@adacore.com>
8443
8444         GDB 7.11 released.
8445
8446 2016-02-24  Wei-cheng Wang  <cole945@gmail.com>
8447
8448         * rs6000-tdep.c (rs6000_frame_cache, rs6000_frame_this_id): Handle
8449         unavailable PC/SP to build unavailable frame.
8450
8451 2016-02-23  Doug Evans  <dje@google.com>
8452
8453         Extend "skip" command to support -file, -gfile, -function, -rfunction.
8454         * NEWS: Document new features.
8455         * skip.c: #include "fnmatch.h", "gdb_regex.h".
8456         (skiplist_entry) <file>: Renamed from filename.
8457         <function>: Renamed from function_name.
8458         <file_is_glob, function_is_regexp>: New members.
8459         <compiled_function_regexp, compiled_function_regexp_is_valid>:
8460         New members.
8461         (make_skip_entry): New function.
8462         (free_skiplist_entry, free_skiplist_entry_cleanup): New functions.
8463         (make_free_skiplist_entry_cleanup): New function.
8464         (skip_file_command): Update.
8465         (skip_function, skip_function_command): Update.
8466         (compile_skip_regexp): New functions.
8467         (skip_command): Add support for new options.
8468         (skip_info): Update.
8469         (skip_file_p, skip_gfile_p): New functions.
8470         (skip_function_p, skip_rfunction_p): New functions.
8471         (function_name_is_marked_for_skip): Update and simplify.
8472         (_initialize_step_skip): Update.
8473         * symtab.c: #include "fnmatch.h".
8474         (compare_glob_filenames_for_search): New function.
8475         * symtab.h (compare_glob_filenames_for_search): Declare.
8476         * utils.c (count_path_elements): New function.
8477         (strip_leading_path_elements): New function.
8478         * utils.h (count_path_elements): Declare.
8479         (strip_leading_path_elements): Declare.
8480
8481 2016-02-23  Simon Marchi  <simon.marchi@ericsson.com>
8482
8483         * arm-tdep.c (arm_decode_svc_copro): Remove "to" parameter.
8484         (thumb_process_displaced_insn): Likewise.
8485         (arm_process_displaced_insn): Adjust calls.
8486
8487 2016-02-23  Yao Qi  <yao.qi@linaro.org>
8488
8489         * aarch64-linux-tdep.c (enum aarch64_syscall) <aarch64_sys_mknod>:
8490         Remove.
8491         <aarch64_sys_mkdir, aarch64_sys_unlink, aarch64_sys_symlink>: Remove.
8492         <aarch64_sys_link, aarch64_sys_rename, aarch64_sys_faccess>: Remove.
8493         <aarch64_sys_mknodat, aarch64_sys_mkdirat>: New.
8494         <aarch64_sys_unlinkat, aarch64_sys_symlinkat>: New.
8495         <aarch64_sys_linkat, aarch64_sys_renameat>: New.
8496         <aarch64_sys_faccessat>: New.
8497         <aarch64_sys_open, aarch64_sys_readlink, aarch64_sys_fstatat>: Remove.
8498         <aarch64_sys_openat, aarch64_sys_readlinkat>: New.
8499         <aarch64_sys_newfstatat>: New.
8500         (UNSUPPORTED_SYSCALL_MAP): New macro.
8501         (aarch64_canonicalize_syscall): Add missing syscalls.
8502
8503 2016-02-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
8504
8505         * gdb-gdb.py (class TypeFlagsPrinter): Use parentheses for print.
8506
8507 2016-02-22  Yao Qi  <yao.qi@linaro.org>
8508
8509         * arm-tdep.c: Fix code format issues.
8510
8511 2016-02-21  Iain Buclaw  <ibuclaw@gdcproject.org>
8512
8513         * d-namespace.c (d_lookup_symbol_imports): Remove argument
8514         'search_parents'.  All callers updated.
8515
8516 2016-02-18  Marcin Kościelnicki  <koriakin@0x04.net>
8517
8518         * s390-linux-tdep.c (s390_guess_tracepoint_registers): New function.
8519         (s390_gdbarch_init): Fill guess_tracepoint_registers hook.
8520
8521 2016-02-18  Walfred Tedeschi  <walfred.tedeschi@intel.com>
8522
8523         * NEWS: Add entry for bound violation.
8524         * amd64-linux-tdep.c (amd64_linux_init_abi_common):
8525         Add handler for segmentation fault.
8526         * gdbarch.sh (handle_segmentation_fault): New.
8527         * gdbarch.c: Regenerate.
8528         * gdbarch.h: Regenerate.
8529         * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
8530         (SIG_CODE_BONDARY_FAULT): New define.
8531         (i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
8532         * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
8533         * i386-tdep.c (i386_mpx_enabled): Add as external.
8534         * i386-tdep.c (i386_mpx_enabled): Add as external.
8535         * infrun.c (handle_segmentation_fault): New function.
8536         (print_signal_received_reason): Use handle_segmentation_fault.
8537
8538 2016-02-18  Marcin Kościelnicki  <koriakin@0x04.net>
8539
8540         * arch-utils.c (default_guess_tracepoint_registers): New function.
8541         * arch-utils.h (default_guess_tracepoint_registers): New prototype.
8542         * gdbarch.c: Regenerate.
8543         * gdbarch.h: Regenerate.
8544         * gdbarch.sh: Add guess_tracepoint_registers hook.
8545         * tracefile.c (tracefile_fetch_registers): Use the new gdbarch hook.
8546
8547 2016-02-17  Gary Benson  <gbenson@redhat.com>
8548
8549         * exec.c (exec_file_locate_attach): Add missing cleanup.
8550
8551 2016-02-16  Don Breazeal  <donb@codesourcery.com>
8552
8553         PR remote/19496
8554         * remote.c (remove_new_fork_children): Check for pending
8555         fork status in thread_info.suspend.
8556
8557 2016-02-16  Yao Qi  <yao.qi@linaro.org>
8558
8559         * arm-linux-tdep.c (arm_linux_software_single_step): Assign
8560         'old_chain' later.
8561
8562 2016-02-16  Yao Qi  <yao.qi@linaro.org>
8563
8564         * arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops)
8565         <syscall_next_pc>: Remove argument PC.  Callers updated.
8566         * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
8567         Remove argument PC.  Get pc from regcache_read_pc.
8568         * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove
8569         argument PC.
8570
8571 2016-02-15  Yao Qi  <yao.qi@linaro.org>
8572
8573         * aarch64-tdep.c (aarch64_analyze_prologue): Remove "0x".
8574
8575 2016-02-12  Yao Qi  <yao.qi@linaro.org>
8576
8577         * arch/arm-linux.c (arm_linux_get_next_pcs_fixup): Calculate
8578         nextpc according to instruction.
8579
8580 2016-02-12  Yao Qi  <yao.qi@linaro.org>
8581
8582         * arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
8583         self->ops->fixup if it isn't NULL.
8584         * arch/arm-get-next-pcs.h: Include gdb_vecs.h.
8585         (struct arm_get_next_pcs_ops) <fixup>: New field.
8586         * arch/arm-linux.c: Include common-regcache.h and
8587         arch/arm-get-next-pcs.h.
8588         (arm_linux_get_next_pcs_fixup): New function.
8589         * arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
8590         * arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
8591         it with arm_linux_get_next_pcs_fixup.
8592         (arm_linux_software_single_step): Move code to
8593         arm_linux_get_next_pcs_fixup.
8594         * arm-tdep.c (arm_get_next_pcs_ops): Initialize it.
8595
8596 2016-02-12  Marcin Kościelnicki  <koriakin@0x04.net>
8597
8598         * xml-tdesc.c (target_fetch_description_xml) [!HAVE_LIBEXPAT]: Warn
8599         and return NULL.
8600
8601 2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>
8602
8603         * frame.h (skip_tailcall_frames): Update comment.
8604         * frame.c (skip_artificial_frames, skip_tailcall_frames): Return NULL
8605         if only artificial frames are found.  Update comment.
8606         (frame_unwind_caller_id): Handle NULL return.
8607         (frame_unwind_caller_pc, frame_unwind_caller_arch): Assert that
8608         skip_artificial_frames does not return NULL.
8609         (frame_pop): Add an error if only tailcall frames are found.
8610         * infcmd.c (finish_command): Move skip_tailcall_frames call into
8611         forward-execution case.  Add an error if only tailcall frames are
8612         found.
8613
8614 2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>
8615
8616         * stack.c (frame_info): Check frame_unwind_caller_id.
8617
8618 2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>
8619
8620         * frame.h (skip_tailcall_frames): New.
8621         * frame.c (skip_tailcall_frames): New.
8622         (frame_pop): Call skip_tailcall_frames.
8623         * infcmd.c (finish_command): Call skip_tailcall_frames.
8624
8625 2016-02-11  Pedro Alves  <palves@redhat.com>
8626
8627         * Makefile.in (check-parallel): New rule.
8628
8629 2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>
8630
8631         * arm-tdep.c (arm_skip_prologue): Remove unused variables.
8632         (arm_analyze_prologue): Likewise.
8633         (arm_scan_prologue): Likewise.
8634         (arm_m_exception_prev_register): Likewise.
8635         (arm_copy_block_xfer): Likewise.
8636         (thumb2_copy_block_xfer): Likewise.
8637         (arm_decode_miscellaneous): Likewise.
8638         (arm_decode_ld_st_word_ubyte): Likewise.
8639         (arm_decode_svc_copro): Likewise.
8640         (thumb2_decode_svc_copro): Likewise.
8641         (thumb_copy_16bit_ldr_literal): Likewise.
8642         (thumb_copy_pop_pc_16bit): Likewise.
8643         (decode_thumb_32bit_ld_mem_hints): Likewise.
8644         (arm_show_force_mode): Likewise.
8645         (_initialize_arm_tdep): Likewise.
8646         (arm_record_strx): Likewise.
8647         (arm_record_extension_space): Likewise.
8648         (arm_record_data_proc_misc_ld_str): Likewise.
8649         (arm_record_exreg_ld_st_insn): Likewise.
8650         (arm_record_vfp_data_proc_insn): Likewise.
8651         (arm_record_coproc_data_proc): Likewise.
8652         (thumb_record_misc): Likewise.
8653         (thumb_record_ldm_stm_swi): Likewise.
8654         (thumb2_record_ld_st_dual_ex_tbb): Likewise.
8655         (thumb2_record_ld_mem_hints): Likewise.
8656         (thumb2_record_lmul_lmla_div): Likewise.
8657         (thumb2_record_asimd_struct_ld_st): Likewise.
8658         (arm_process_record): Likewise.
8659
8660 2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>
8661
8662         * arm-tdep.c (arm_displaced_step_copy_insn): Remove.
8663         (ARM displaced stepping support): Remove reference to
8664         arm_displaced_step_copy_insn in comment.
8665         * arm-tdep.h (arm_displaced_step_copy_insn): Remove.
8666         * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove
8667         reference to arm_displaced_step_copy_insn in comment.
8668
8669 2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>
8670
8671         * arm-tdep.c (thumb_copy_unmodified_16bit): Change type of insn.
8672         (thumb_copy_b): Likewise.
8673         (arm_decode_b_bl_ldmstm): Likewise.
8674         (thumb_copy_16bit_ldr_literal): Likewise.
8675         (thumb_copy_pop_pc_16bit): Likewise.
8676
8677 2016-02-11  Antoine Tremblay  <antoine.tremblay@ericsson.com>
8678
8679         * tracepoint.c (encode_actions_1): Use target_gdbarch () rather
8680         than loc->gdbarch.
8681
8682 2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>
8683
8684         * tracefile-tfile.c (trace_tdesc): New static variable.
8685         (tfile_open): Clear trace_tdesc, call target_find_description.
8686         (tfile_interp_line): Recognize tdesc lines.
8687         (tfile_close): Clear trace_tdesc.
8688         (tfile_xfer_partial_features): New function.
8689         (tfile_xfer_partial): Call tfile_xfer_partial_features.
8690         (tfile_append_tdesc_line): New function.
8691
8692 2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>
8693
8694         * ctf.c (ctf_write_tdesc): New function.
8695         (ctf_write_ops): Wire in ctf_write_tdesc.
8696         * tracefile-tfile.c (tfile_write_tdesc): New function.
8697         (tfile_write_ops): Wire in tfile_write_tdesc.
8698         * tracefile.c (trace_save): Call write_tdesc method.
8699         * tracefile.h (struct trace_file_write_ops): Add write_tdesc method.
8700         * xml-tdesc.c (target_fetch_description_xml): New function.
8701         * xml-tdesc.h: Add target_fetch_description_xml prototype.
8702
8703 2016-02-10  Simon Marchi  <simon.marchi@ericsson.com>
8704
8705         * arm-tdep.c (arm_copy_extra_ld_st): Fix "unpriveleged" typo.
8706         (arm_decode_dp_misc): Likewise.
8707
8708 2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>
8709
8710         * amd64-tdep.c (amd64_ax_pseudo_register_collect): New function.
8711         (amd64_init_abi): Fill ax_pseudo_register_collect hook.
8712         * gdb/i386-tdep.c (i386_pseudo_register_read_into_value): Remove
8713         misleading comment.
8714         (i386_pseudo_register_write): Ditto.
8715         (i386_ax_pseudo_register_collect): New function.
8716         (i386_gdbarch_init): Fill ax_pseudo_register_collect hook.
8717         * i386-tdep.h: Add i386_ax_pseudo_register_collect prototype.
8718
8719 2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>
8720
8721         * tracefile-tfile.c (tfile_fetch_registers): Use g packet order
8722         instead of gdb order.
8723
8724 2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>
8725
8726         * tracefile-tfile.c (tfile_fetch_registers): Fix off-by-one in bounds
8727         check.
8728
8729 2016-02-10  Joel Brobecker  <brobecker@adacore.com>
8730
8731         * NEWS: Create a new section for the next release branch.
8732         Rename the section of the current branch, now that it has
8733         been cut.
8734
8735 2016-02-10  Joel Brobecker  <brobecker@adacore.com>
8736
8737         GDB 7.11 branch created (9ef9e6a6a0dd8f948708cb67c9afcfd0be40cb0a):
8738         * version.in: Bump version to 7.11.50.DATE-git.
8739
8740 2016-02-09  Keith Seitz  <keiths@redhat.com>
8741
8742         PR breakpoints/19546
8743         * breakpoint.c (breakpoint_event_location_empty_p): New function.
8744         (update_breakpoints_after_exec, bkpt_re_set): Use this new function
8745         instead of event_location_empty_p.
8746
8747 2016-02-09  Keith Seitz  <keiths@redhat.com>
8748
8749         * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Use
8750         string_to_event_location_basic instead of string_to_event_location.
8751
8752 2016-02-09  Keith Seitz  <keiths@redhat.com>
8753
8754         * guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Skip
8755         leading whitespace and use string_to_event_location_basic instead
8756         of new_linespec_location.
8757
8758 2016-02-09  Keith Seitz  <keiths@redhat.com>
8759
8760         PR python/19506
8761         * python/py-breakpoint.c (bppy_init): Use
8762         string_to_event_location_basic instead of new_linespec_location.
8763
8764 2016-02-09  Keith Seitz  <keiths@redhat.com>
8765
8766         * location.c (string_to_explicit_location): Note that "-p" is
8767         reserved for probe locations and return NULL for any input
8768         that starts with that.
8769         (string_to_event_location): Move "legacy" linespec code to ...
8770         (string_to_event_location_basic): ... here.
8771         * location.h (string_to_event_location): Update comment.
8772         (string_to_event_location_basic): New function.
8773
8774 2016-02-09  Simon Marchi  <simon.marchi@ericsson.com>
8775
8776         * configure.ac: Use AC_CONFIG_FILES instead of passing arguments
8777         to AC_OUTPUT.  Remove "exit 0" at the end.
8778         * configure: Regenerate.
8779
8780 2016-02-09  Pedro Alves  <palves@redhat.com>
8781
8782         PR breakpoints/19548
8783         * breakpoint.c (create_overlay_event_breakpoint): Don't update
8784         global location list here.
8785         (create_longjmp_master_breakpoint)
8786         (create_std_terminate_master_breakpoint)
8787         (create_exception_master_breakpoint, create_jit_event_breakpoint)
8788         (update_breakpoint_locations):
8789         (breakpoint_re_set): Update global location list after all
8790         breakpoints are re-set.
8791
8792 2016-02-08  Simon Marchi  <simon.marchi@ericsson.com>
8793
8794         * remote.c (remote_register_number_and_offset): Remove unused
8795         variable(s).
8796         (remote_thread_always_alive): Likewise.
8797         (remote_update_thread_list): Likewise.
8798         (process_initial_stop_replies): Likewise.
8799         (remote_start_remote): Likewise.
8800         (remote_check_symbols): Likewise.
8801         (discard_pending_stop_replies): Likewise.
8802         (process_stop_reply): Likewise.
8803         (putpkt_binary): Likewise.
8804         (getpkt): Likewise.
8805         (remote_add_target_side_condition): Likewise.
8806         (remote_insert_breakpoint): Likewise.
8807         (remote_supports_stopped_by_sw_breakpoint): Likewise.
8808         (remote_supports_stopped_by_hw_breakpoint): Likewise.
8809         (remote_xfer_partial): Likewise.
8810         (remote_read_btrace): Likewise.
8811         (remote_async_serial_handler): Likewise.
8812         (remote_thread_events): Likewise.
8813         (_initialize_remote): Likewise.
8814
8815 2016-02-07  Simon Marchi  <simon.marchi@polymtl.ca>
8816
8817         * varobj.h (varobj_delete): Remove dellist parameter, update and
8818         move documentation here.
8819         * varobj.c (struct cpstack, cppush, cppop): Remove.
8820         (delete_variable): Remove resultp (first) parameter.
8821         (delete_variable_1): Likewise.
8822         (varobj_delete): Remove dellist parameter and unused code.
8823         (update_dynamic_varobj_children): Adjust varobj_delete call.
8824         (update_type_if_necessary): Likewise.
8825         (varobj_set_visualizer): Likewise.
8826         (varobj_update): Likewise.
8827         (value_of_root): Likewise.
8828         (varobj_invalidate_iter): Likewise.
8829         * mi/mi-cmd-var.c (mi_cmd_var_delete): Likewise.
8830
8831 2016-02-04  Yao Qi  <yao.qi@linaro.org>
8832
8833         * remote.c (remote_wait_as): Set rs->waiting_for_stop_reply to
8834         0 before handling 'F' and set it back afterwards.
8835
8836 2016-02-02  Simon Marchi  <simon.marchi@ericsson.com>
8837
8838         * ui-out.c (MAX_UI_OUT_LEVELS): Remove.
8839
8840 2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>
8841
8842         * amd64-linux-siginfo.c (nat_siginfo_t, nat_sigval_t, nat_timeval):
8843         New types.
8844         (compat_siginfo): New bound fields added.
8845         (compat_x32_siginfo): New field added.
8846         (cpt_si_addr_lsb): New define.
8847         (compat_siginfo_from_siginfo): Use nat_siginfo.
8848         (siginfo_from_compat_siginfo): Use nat_siginfo.
8849         (compat_x32_siginfo_from_siginfo): Likewise.
8850         (siginfo_from_compat_x32_siginfo): Likewise.
8851
8852 2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>
8853
8854         * linux-tdep.c (linux_get_siginfo_type): Add the _addr_bnd
8855         structure to the siginfo if extra_fields contains
8856         LINUX_SIGINFO_FIELD_ADDR_BND.
8857
8858 2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>
8859
8860         * linux-tdep.h (linux_get_siginfo_type_with_fields): Make extern.
8861         * linux-tdep.c (linux_get_siginfo_type_with_fields): Make extern.
8862         * i386-linux-tdep.h (x86_linux_get_siginfo_type): New
8863         function.
8864         * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
8865         x86_linux_get_siginfo_type for the amd64 abi.
8866         * i386-linux-tdep.c (x86_linux_get_siginfo_type): New
8867         function.
8868         (i386_linux_init_abi): Add new function at the i386 ABI
8869         initialization.
8870
8871 2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>
8872
8873         * linux-tdep.h (linux_siginfo_extra_field_values): New enum values.
8874         (linux_siginfo_extra_fields): New enum type.
8875         * linux-tdep.c (linux_get_siginfo_type_with_fields): New function.
8876         (linux_get_siginfo_type): Use new function.
8877
8878 2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>
8879
8880         * nat/amd64-linux-siginfo.c: New file.
8881         * nat/amd64-linux-siginfo.h: New file.
8882         * Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h.
8883         (amd64-linux-siginfo.o): New rule.
8884         * config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o.
8885         * amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include.
8886         (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
8887         (compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo)
8888         (compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid)
8889         (cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status)
8890         (cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band)
8891         (cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c.
8892
8893 2016-02-01  Andrew Burgess  <andrew.burgess@embecosm.com>
8894
8895         * value.c (max_value_size): New variable.
8896         (MIN_VALUE_FOR_MAX_VALUE_SIZE): New define.
8897         (set_max_value_size): New function.
8898         (show_max_value_size): New function.
8899         (check_type_length_before_alloc): New function.
8900         (allocate_value_contents): Call check_type_length_before_alloc.
8901         (set_value_enclosing_type): Likewise.
8902         (_initialize_values): Add set/show handler for max-value-size.
8903         * NEWS: Mention new set/show command.
8904
8905 2016-01-31  Simon Marchi  <simon.marchi@polymtl.ca>
8906
8907         * varobj.h (struct varobj): Fix typos in comments.
8908         (struct lang_varobj_ops): Likewise.
8909         * varobj.c (VAROBJ_TABLE_SIZE): Likewise.
8910         (varobj_create): Move misplaced comment.
8911
8912 2016-01-29  Simon Marchi  <simon.marchi@ericsson.com>
8913
8914         * aarch64-tdep.c (aarch64_record_asimd_load_store): Add braces
8915         to for include additional lines.
8916         * xcoffread.c (scan_xcoff_symtab): Remove unnecessary braces.
8917
8918 2016-01-28  Simon Marchi  <simon.marchi@ericsson.com>
8919
8920         * gnulib/import/Makefile.am: Regenerate.
8921         * gnulib/import/Makefile.in: Regenerate.
8922         * gnulib/import/m4/gnulib-cache.m4: Regenerate.
8923         * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add rawmemchr.
8924
8925 2016-01-28  Simon Marchi  <simon.marchi@ericsson.com>
8926
8927         * remote.c (skip_to_semicolon): Remove.
8928         (remote_parse_stop_reply): Use strchrnul instead of
8929         skip_to_semicolon.
8930         * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
8931         strchrnul.
8932         * gnulib/aclocal.m4: Regenerate.
8933         * gnulib/config.in: Regenerate.
8934         * gnulib/configure: Regenerate.
8935         * gnulib/import/Makefile.am: Regenerate.
8936         * gnulib/import/Makefile.in: Regenerate.
8937         * gnulib/import/m4/gnulib-cache.m4: Regenerate.
8938         * gnulib/import/m4/gnulib-comp.m4: Regenerate.
8939         * gnulib/import/m4/rawmemchr.m4: New file.
8940         * gnulib/import/m4/strchrnul.m4: New file.
8941         * gnulib/import/rawmemchr.c: New file.
8942         * gnulib/import/rawmemchr.valgrind: New file.
8943         * gnulib/import/strchrnul.c: New file.
8944         * gnulib/import/strchrnul.valgrind: New file.
8945
8946 2016-01-28  Yao Qi  <yao.qi@linaro.org>
8947
8948         * breakpoint.c (build_target_command_list): Don't call continue
8949         if aexpr is NULL.
8950         (build_target_condition_list): Likewise.
8951
8952 2016-01-27  Kevin Buettner  <kevinb@redhat.com>
8953
8954         * rx-tdep.c (rx_push_dummy_call): Treat scalars larger than 8
8955         bytes as aggregates.
8956
8957 2016-01-27  Joel Brobecker  <brobecker@adacore.com>
8958
8959         * MAINTAINERS (Responsible Maintainers): Add Keith Seitz as
8960         Linespec Maintainers.
8961
8962 2016-01-26  Simon Marchi  <simon.marchi@ericsson.com>
8963
8964         * common/common-utils.c (skip_spaces): Fix comment.
8965         (skip_to_space_const): Likewise.
8966
8967 2016-01-25  Yao Qi  <yao.qi@linaro.org>
8968
8969         * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
8970         Remove argument pc.  Get pc by regcache_read_pc.  Callers updated.
8971         (arm_deal_with_atomic_sequence_raw): Likewise.
8972         (thumb_get_next_pcs_raw): Likewise.
8973         (arm_get_next_pcs_raw): Likewise.
8974         (arm_get_next_pcs): Remove argument pc.  Callers updated.
8975         * arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.
8976
8977 2016-01-25  Mark Wielaard  <mjw@redhat.com>
8978
8979         * ada-lang.c (ada_evaluate_subexp): Add proper else block.
8980         * c-typeprint.c (c_type_print_base): Fix misleading indentation of
8981         if statement.
8982         * inflow.c (child_terminal_ours_1): Fix misleading indentation of
8983         statement block by introducing an else.
8984         * linux-record.c (record_linux_sockaddr): Fix misleading indentation
8985         of return statements.
8986         (record_linux_msghdr): Likewise.
8987
8988 2016-01-25  Pedro Alves  <palves@redhat.com>
8989
8990         PR threads/19461
8991         * infrun.c (handle_inferior_event_1) <fork/vfork>: Update
8992         parent/child running states.
8993
8994 2016-01-25  Pedro Alves  <palves@redhat.com>
8995
8996         PR gdb/19494
8997         * linux-nat.c (kill_one_lwp): New, factored out from ...
8998         (kill_callback): ... this.
8999         (kill_wait_callback): New, factored out from ...
9000         (kill_wait_one_lwp): ... this.
9001         (kill_unfollowed_fork_children): New function.
9002         (linux_nat_kill): Use it.
9003
9004 2016-01-22  John Baldwin  <jhb@FreeBSD.org>
9005
9006         * fbsd-nat.c (fbsd_pid_to_str): Adjust string format.
9007
9008 2016-01-22  Yao Qi  <yao.qi@linaro.org>
9009
9010         * arm-linux-nat.c (fetch_fpregs): Call perror_with_name
9011         instead of warning.
9012         (store_fpregs, fetch_regs, store_regs): Likewise.
9013         (fetch_wmmx_regs, store_wmmx_regs): Likewise.
9014         (fetch_vfp_regs, store_vfp_regs): Likewise.
9015
9016 2016-01-21  Doug Evans  <dje@google.com>
9017
9018         * breakpoint.c (init_breakpoint_sal): Add comment.
9019
9020 2016-01-21  Marcin Kościelnicki  <koriakin@0x04.net>
9021
9022         * ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection.
9023
9024 2016-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>
9025
9026         * disasm.c (maybe_add_dis_line_entry): Rename to...
9027         (add_dis_line_entry): ...this, and update header comment.
9028         (do_mixed_source_and_assembly): Now use add_dis_line_entry.
9029
9030 2016-01-21  Pedro Alves  <palves@redhat.com>
9031
9032         * Makefile.in (COMPILER_CFLAGS): New.
9033         (CXXFLAGS): Get it from configure.
9034         (INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
9035         instead of CFLAGS.
9036         * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
9037         COMPILER_CFLAGS.
9038         * configure: Regenerate.
9039
9040 2016-01-21  Joel Brobecker  <brobecker@adacore.com>
9041
9042         * location.h (new_address_location): Add new parameters
9043         "addr_string" and "addr_string_len".
9044         (get_address_string_location): Add declaration.
9045         * location.c (new_address_location): Add new parameters
9046         "addr_string" and "addr_string_len".  If not NULL, store
9047         a copy of the addr_string in the new location as well.
9048         (get_address_string_location): New function.
9049         (string_to_event_location): Update call to new_address_location.
9050         * linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
9051         Save the event location in the parser's state before
9052         passing it to convert_address_location_to_sals.
9053         * breakpoint.c (create_thread_event_breakpoint): Update call
9054         to new_address_location.
9055         (init_breakpoint_sal): Get the event location's string, if any,
9056         and use it to update call to new_address_location.
9057         * python/py-finishbreakpoint.c (bpfinishpy_init):
9058         Update call to new_address_location.
9059         * spu-tdep.c (spu_catch_start): Likewise.
9060
9061         * config/djgpp/fnchange.lst: Add entries for
9062         gdb/testsuite/gdb.base/break-fun-addr1.c and
9063         gdb/testsuite/gdb.base/break-fun-addr2.c.
9064
9065 2016-01-21  Yao Qi  <yao.qi@linaro.org>
9066
9067         * arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
9068         is_thumb and set it according to CPSR saved on the stack.
9069         (arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
9070         arm_linux_sigreturn_next_pc.
9071
9072 2016-01-20  Simon Marchi  <simon.marchi@polymtl.ca>
9073
9074         * python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__):
9075         Fix enumerators sort key function.
9076
9077 2016-01-20  Joel Brobecker  <brobecker@adacore.com>
9078
9079         * printcmd.c (print_scalar_formatted): Move binary operator from
9080         end of line to beginning of next line.  Adjust formatting
9081         accordingly.
9082
9083 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
9084
9085         * fbsd-nat.c (fbsd_pid_to_exec_file): Use new "buflen" instead of
9086         "len" with sysctl.
9087
9088 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
9089
9090         * fbsd-tdep.c (find_stop_signal): Remove.
9091         (struct fbsd_collect_regset_section_cb) <lwp>: New field.
9092         <stop_signal>: New field.
9093         <abort_iteration>: New field.
9094         (fbsd_collect_regset_section_cb): Use new fields.
9095         (fbsd_collect_thread_registers): New function.
9096         (struct fbsd_corefile_thread_data): New structure.
9097         (fbsd_corefile_thread): New function.
9098         (fbsd_make_corefile_notes): Use new function to dump notes for each
9099         non-exited thread in a process.
9100
9101 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
9102
9103         * configure.ac: Check for support for LWP names on FreeBSD.
9104         * fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
9105         [TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
9106         (fbsd_fetch_kinfo_proc): Move function earlier.
9107         [PT_LWPINFO] (fbsd_thread_alive): New function.
9108         [PT_LWPINFO] (fbsd_pid_to_str): New function.
9109         [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
9110         [PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
9111         [PT_LWPINFO] (fbsd_add_threads): New function.
9112         [PT_LWPINFO] (fbsd_update_thread_list): New function.
9113         [PT_LWPINFO] New variable super_resume.
9114         [PT_LWPINFO] (resume_one_thread_cb): New function.
9115         [PT_LWPINFO] (resume_all_threads_cb): New function.
9116         [PT_LWPINFO] (fbsd_resume): New function.
9117         (fbsd_remember_child): Save full ptid instead of plain pid.
9118         (fbsd_is_child_pending): Return ptid of saved child process.
9119         (fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
9120         first stop.
9121         [PT_LWP_EVENTS] Handle LWP events.
9122         [TDP_RFPPWAIT] Include LWP in child ptid.
9123         (fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
9124         (fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
9125         Add threads for existing processes.
9126         (fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
9127         "fbsd_thread_alive".
9128         Set "to_pid_to_str" to "fbsd_pid_to_str".
9129         [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
9130         "fbsd_thread_name".
9131         [PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
9132         Set "to_has_thread_control" to "tc_schedlock".
9133         Set "to_resume" to "fbsd_resume".
9134         (_initialize_fbsd_nat): New function.
9135         * configure: Regenerate.
9136         * config.in: Regenerate.
9137
9138 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
9139
9140         * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
9141         get_ptrace_pid.
9142         (amd64bsd_store_inferior_registers): Use get_ptrace_pid.
9143         (amd64bsd_dr_get): Use get_ptrace_pid.
9144         (amd64bsd_dr_set): Use get_ptrace_pid.
9145         * i386bsd-nat.c (i386bsd_fetch_inferior_registers): Use get_ptrace_pid.
9146         (i386bsd_store_inferior_registers): Use get_ptrace_pid.
9147         (i386bsd_dr_get): Use get_ptrace_pid.
9148         (i386bsd_dr_set): Use get_ptrace_pid.
9149         * inf-ptrace.c (get_ptrace_pid): Export.
9150         * inf-ptrace.h (get_ptrace_pid): Declare.
9151         * ppcfbsd-nat.c (ppcfbsd_fetch_inferior_registers): Use lwp id.
9152         (ppcfbsd_store_inferior_registers): Use lwp id.
9153
9154 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
9155
9156         * fbsd_tdep.c (fbsd_core_pid_to_str): New function.
9157         (fbsd_core_thread_name): New function.
9158         (fbsd_init_abi): Add "core_pid_to_str" gdbarch method.
9159         Add "core_thread_name" gdbarch method.
9160
9161 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
9162
9163         * corelow.c (core_thread_name): New function.
9164         (init_core_ops): Use "core_thread_name" for the "to_thread_name"
9165         target op.
9166         * gdbarch.sh (core_thread_name): New gdbarch callback.
9167         * gdbarch.h: Re-generate.
9168         * gdbarch.c: Re-generate.
9169
9170 2016-01-19  Simon Marchi  <simon.marchi@polymtl.ca>
9171
9172         * python/lib/gdb/printing.py (_EnumInstance.to_string): Explicitly
9173         convert gdb.Value to integer type using int().
9174
9175 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
9176
9177         * configure.ac: Include <sys/types.h when checking for "r_fs" in
9178         "struct reg".
9179         * configure: Regenerate.
9180
9181 2016-01-19  Pedro Alves  <palves@redhat.com>
9182
9183         * ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
9184         * break-catch-throw.c (re_set_exception_catchpoint): Pass the
9185         current program space down to linespec decoding and breakpoint
9186         location updating.
9187         * breakpoint.c (parse_breakpoint_sals): Adjust calls to
9188         decode_line_full.
9189         (until_break_command): Adjust calls to decode_line_1.
9190         (base_breakpoint_decode_location, bkpt_decode_location): Add
9191         'search_pspace' parameter.  Pass it along.
9192         (bkpt_probe_create_sals_from_location): Adjust calls to
9193         parse_probes.
9194         (tracepoint_decode_location, tracepoint_probe_decode_location)
9195         (strace_marker_decode_location): Add 'search_pspace' parameter.
9196         Pass it along.
9197         (all_locations_are_pending): Rewrite to take a breakpoint and
9198         program space as arguments instead.
9199         (hoist_existing_locations): New function.
9200         (update_breakpoint_locations): Add 'filter_pspace' parameter.  Use
9201         hoist_existing_locations instead of always removing all locations,
9202         and adjust to all_locations_are_pending change.
9203         (location_to_sals): Add 'search_pspace' parameter.  Pass it along.
9204         Don't disable the breakpoint if there are other locations in
9205         another program space.
9206         (breakpoint_re_set_default): Adjust to pass down the current
9207         program space as filter program space.
9208         (decode_location_default): Add 'search_pspace' parameter and pass
9209         it along.
9210         (prepare_re_set_context): Don't switch program space here.
9211         (breakpoint_re_set): Use save_current_space_and_thread instead of
9212         save_current_program_space.
9213         * breakpoint.h (struct breakpoint_ops) <decode_location>: Add
9214         'search_pspace' parameter.
9215         (update_breakpoint_locations): Add 'filter_pspace' parameter.
9216         * cli/cli-cmds.c (edit_command, list_command): Adjust calls to
9217         decode_line_1.
9218         * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
9219         program space as filter program space.
9220         * linespec.c (struct linespec_state) <search_pspace>: New field.
9221         (create_sals_line_offset, convert_explicit_location_to_sals)
9222         (parse_linespec): Pass the search program space down.
9223         (linespec_state_constructor): Add 'search_pspace' parameter.
9224         Store it.
9225         (linespec_parser_new): Add 'search_pspace' parameter and pass it
9226         along.
9227         (linespec_lex_to_end): Adjust.
9228         (decode_line_full, decode_line_1): Add 'search_pspace' parameter
9229         and pass it along.
9230         (decode_line_with_last_displayed): Adjust.
9231         (collect_symtabs_from_filename, symtabs_from_filename): New
9232         'search_pspace' parameter.  Use it.
9233         (find_function_symbols): Pass the search program space down.
9234         * linespec.h (decode_line_1, decode_line_full): Add
9235         'search_pspace' parameter.
9236         * probe.c (parse_probes_in_pspace): New function, factored out
9237         from ...
9238         (parse_probes): ... this.  Add 'search_pspace' parameter and use
9239         it.
9240         * probe.h (parse_probes): Add pspace' parameter.
9241         * python/python.c (gdbpy_decode_line): Adjust.
9242         * tracepoint.c (scope_info): Adjust.
9243
9244 2016-01-18  Maciej W. Rozycki  <macro@imgtec.com>
9245
9246         * mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
9247         instruction support.
9248         (micromips_next_pc): Likewise.
9249         (micromips_scan_prologue): Likewise.
9250         (micromips_deal_with_atomic_sequence): Likewise.
9251         (micromips_stack_frame_destroyed_p): Likewise.
9252         (mips_breakpoint_from_pc): Likewise.
9253
9254 2016-01-18  Maciej W. Rozycki  <macro@imgtec.com>
9255
9256         * mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass
9257         unshifted 16-bit microMIPS instruction word to `mips_insn_size'.
9258
9259 2016-01-18  Pedro Alves  <palves@redhat.com>
9260
9261         * NEWS: Mention that GDB now displays the ID and name of the
9262         thread that hit a breakpoint or received a signal.
9263         * break-catch-sig.c (signal_catchpoint_print_it): Use
9264         maybe_print_thread_hit_breakpoint.
9265         * break-catch-syscall.c (print_it_catch_syscall): Likewise.
9266         * break-catch-throw.c (print_it_exception_catchpoint): Likewise.
9267         * breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
9268         (print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
9269         (print_it_catch_exec, print_it_ranged_breakpoint)
9270         (print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
9271         Use maybe_print_thread_hit_breakpoint.
9272         * breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
9273         * gdbthread.h (show_thread_that_caused_stop): Declare.
9274         * infrun.c (print_signal_received_reason): Print which thread
9275         received signal.
9276         * thread.c (show_thread_that_caused_stop): New function.
9277
9278 2016-01-18  Gary Benson  <gbenson@redhat.com>
9279
9280         * nat/linux-namespaces.c (do_fork): New function.
9281         (linux_mntns_get_helper): Use the above.
9282
9283 2016-01-17  Jonas Hahnfeld <Hahnfeld@itc.rwth-aachen.de>  (tiny change)
9284
9285         Pushed by Joel Brobecker  <brobecker@adacore.com>.
9286         PR gdb/19208
9287         * dwarf2read.c (read_partial_die): Do not call set_objfile_main_name
9288         if the function has no name.
9289
9290 2016-01-15  Sandra Loosemore  <sandra@codesourcery.com>
9291
9292         * charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
9293         Conditionalize for Windows host.
9294         (GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
9295         (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
9296         (phony_iconv_open): Handle both UTF-32 endiannesses.
9297         (phony_iconv): Likewise.  Check for output overflow and clean up
9298         out-of-input cases.  Correct adjustment to input buffer pointer.
9299         (set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
9300         phony_iconv_open.
9301
9302 2016-01-15  Pedro Alves  <palves@redhat.com>
9303
9304         * NEWS: Mention star wildcard ranges.
9305         * cli/cli-utils.c (get_number_or_range): Check state->in_range first.
9306         (number_range_setup_range): New function.
9307         * cli/cli-utils.h (number_range_setup_range): New declaration.
9308         * thread.c (thread_apply_command): Support star TID ranges.
9309         * tid-parse.c (tid_range_parser_finished)
9310         (tid_range_parser_string, tid_range_parser_skip)
9311         (get_tid_or_range, get_tid_or_range): Handle
9312         TID_RANGE_STATE_STAR_RANGE.
9313         (tid_range_parser_star_range): New function.
9314         * tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
9315         New value.
9316         (tid_range_parser_star_range): New declaration.
9317
9318 2016-01-15  Pedro Alves  <palves@redhat.com>
9319
9320         * thread.c (thread_apply_command): Use the tid range parser to
9321         advance past the thread ID list.
9322         * tid-parse.c (get_positive_number_trailer): New function.
9323         (parse_thread_id): Use it.
9324         (get_tid_or_range): Use it.  Return 0 instead of throwing invalid
9325         thread ID error.
9326         (get_tid_or_range): Detect negative values.  Return 0 instead of
9327         throwing invalid thread ID error.
9328
9329 2016-01-14  Yao Qi  <yao.qi@linaro.org>
9330
9331         * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
9332         Declare.
9333         (arm_linux_get_next_pcs_ops): Install
9334         arm_linux_get_next_pcs_syscall_next_pc.
9335         (arm_linux_syscall_next_pc): Change to ...
9336         (arm_linux_get_next_pcs_syscall_next_pc): ... it.
9337         (arm_linux_init_abi): Don't set tdep->syscall_next_pc.
9338         * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
9339         (arm_get_next_pcs_syscall_next_pc): Make it static.  Don't
9340         call tdep->syscall_next_pc.
9341         * arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
9342         (arm_get_next_pcs_syscall_next_pc): Remove.
9343
9344 2016-01-14  Yao Qi  <yao.qi@linaro.org>
9345
9346         * remote.c (remote_set_syscall_catchpoint): Cast to char *.
9347         * thread.c (do_captured_thread_select): Cast to const char *.
9348
9349 2016-01-14  Yao Qi  <yao.qi@linaro.org>
9350
9351         * arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
9352         argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
9353         (thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
9354         instead.
9355         * arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
9356         <arm_thumb2_breakpoint>: Remove.
9357         <has_thumb2_breakpoint>: New field.
9358         (arm_get_next_pcs_ctor): Update declaration.
9359         * arm-linux-tdep.c (arm_linux_software_single_step): Pass
9360         1 to arm_get_next_pcs_ctor.
9361         * arm-tdep.c (arm_software_single_step): Pass 0 to
9362         arm_get_next_pcs_ctor.
9363
9364 2016-01-13  Ulrich Weigand  <uweigand@de.ibm.com>
9365
9366         * MAINTAINERS: Add Andreas Arnez as s390 target maintainer.
9367
9368 2016-01-13  Yao Qi  <yao.qi@linaro.org>
9369
9370         * arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use
9371         byte_order_for_code to read instruction.
9372
9373 2016-01-13  Pedro Alves  <palves@redhat.com>
9374
9375         * NEWS: Mention $_gthread.
9376         * gdbthread.h (struct thread_info) <global_num>: Mention
9377         $_gthread.
9378         * thread.c (thread_num_make_value_helper): New function.
9379         (thread_id_make_value): Delete.
9380         (thread_id_per_inf_num_make_value, global_thread_id_make_value):
9381         New.
9382         (thread_funcs): Adjust.
9383         (gthread_funcs): New.
9384         (_initialize_thread): Register $_gthread variable.
9385
9386 2016-01-13  Pedro Alves  <palves@redhat.com>
9387
9388         * NEWS: Mention "info threads -gid".
9389         * gdbthread.h (struct thread_info) <global_num>: Mention "info
9390         threads -gid".
9391         * thread.c (info_threads_command): Handle "-gid".
9392         (_initialize_thread): Adjust "info threads" help string to mention
9393         -gid.
9394
9395 2016-01-13  Pedro Alves  <palves@redhat.com>
9396
9397         * NEWS: Mention InferiorThread.global_num.
9398         * python/py-infthread.c (thpy_get_global_num): New function.
9399         (thread_object_getset): Register "global_num".
9400
9401 2016-01-13  Pedro Alves  <palves@redhat.com>
9402
9403         * NEWS: Mention that thread IDs are now per inferior and global
9404         thread IDs.
9405         * Makefile.in (SFILES): Add tid-parse.c.
9406         (COMMON_OBS): Add tid-parse.o.
9407         (HFILES_NO_SRCDIR): Add tid-parse.h.
9408         * ada-tasks.c: Adjust to use ptid_to_global_thread_id.
9409         * breakpoint.c (insert_breakpoint_locations)
9410         (remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
9411         (print_one_breakpoint_location, set_longjmp_breakpoint)
9412         (check_longjmp_breakpoint_for_call_dummy)
9413         (set_momentary_breakpoint): Adjust to use global IDs.
9414         (find_condition_and_thread, watch_command_1): Use parse_thread_id.
9415         (until_break_command, longjmp_bkpt_dtor)
9416         (breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
9417         to use global IDs.
9418         * dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
9419         ptid_to_global_thread_id.
9420         * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
9421         * gdbthread.h (struct thread_info): Rename field 'num' to
9422         'global_num.  Add new fields 'per_inf_num' and 'inf'.
9423         (thread_id_to_pid): Rename thread_id_to_pid to
9424         global_thread_id_to_ptid.
9425         (pid_to_thread_id): Rename to ...
9426         (ptid_to_global_thread_id): ... this.
9427         (valid_thread_id): Rename to ...
9428         (valid_global_thread_id): ... this.
9429         (find_thread_id): Rename to ...
9430         (find_thread_global_id): ... this.
9431         (ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
9432         (print_thread_info): Add comment.
9433         * tid-parse.h: New file.
9434         * tid-parse.c: New file.
9435         * infcmd.c (step_command_fsm_prepare)
9436         (step_command_fsm_should_stop): Adjust to use the global thread
9437         ID.
9438         (until_next_command, until_next_command)
9439         (finish_command_fsm_should_stop): Adjust to use the global thread
9440         ID.
9441         (attach_post_wait): Adjust to check the inferior number too.
9442         * inferior.h (struct inferior) <highest_thread_num>: New field.
9443         * infrun.c (handle_signal_stop)
9444         (insert_exception_resume_breakpoint)
9445         (insert_exception_resume_from_probe): Adjust to use the global
9446         thread ID.
9447         * record-btrace.c (record_btrace_open): Use global thread IDs.
9448         * remote.c (process_initial_stop_replies): Also consider the
9449         inferior number.
9450         * target.c (target_pre_inferior): Clear the inferior's highest
9451         thread num.
9452         * thread.c (clear_thread_inferior_resources): Adjust to use the
9453         global thread ID.
9454         (new_thread): New inferior parameter.  Adjust to use it.  Set both
9455         the thread's global ID and the thread's per-inferior ID.
9456         (add_thread_silent): Adjust.
9457         (find_thread_global_id): New.
9458         (find_thread_id): Make static.  Adjust to rename.
9459         (valid_thread_id): Rename to ...
9460         (valid_global_thread_id): ... this.
9461         (pid_to_thread_id): Rename to ...
9462         (ptid_to_global_thread_id): ... this.
9463         (thread_id_to_pid): Rename to ...
9464         (global_thread_id_to_ptid): ... this.  Adjust.
9465         (first_thread_of_process): Adjust.
9466         (do_captured_list_thread_ids): Adjust to use global thread IDs.
9467         (should_print_thread): New function.
9468         (print_thread_info): Rename to ...
9469         (print_thread_info_1): ... this, and add new show_global_ids
9470         parameter.  Handle it.  Iterate over inferiors.
9471         (print_thread_info): Reimplement as wrapper around
9472         print_thread_info_1.
9473         (show_inferior_qualified_tids): New function.
9474         (print_thread_id): Use it.
9475         (tp_array_compar): Compare inferior numbers too.
9476         (thread_apply_command): Use tid_range_parser.
9477         (do_captured_thread_select): Use parse_thread_id.
9478         (thread_id_make_value): Adjust.
9479         (_initialize_thread): Adjust "info threads" help string.
9480         * varobj.c (struct varobj_root): Update comment.
9481         (varobj_create): Adjust to use global thread IDs.
9482         (value_of_root_1): Adjust to use global_thread_id_to_ptid.
9483         * windows-tdep.c (display_tib): No longer accept an argument.
9484         * cli/cli-utils.c (get_number_trailer): Make extern.
9485         * cli/cli-utils.h (get_number_trailer): Declare.
9486         (get_number_const): Adjust documentation.
9487         * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
9488         thread IDs.
9489         * mi/mi-interp.c (mi_new_thread, mi_thread_exit)
9490         (mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
9491         * mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
9492         * guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
9493         Likewise.
9494         * python/py-breakpoint.c (bppy_set_thread): Likewise.
9495         * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
9496         * python/py-infthread.c (thpy_get_num): Add comment and return the
9497         per-inferior thread ID.
9498         (thread_object_getset): Update comment of "num".
9499
9500 2016-01-13  Pedro Alves  <palves@redhat.com>
9501
9502         * breakpoint.c (remove_threaded_breakpoints)
9503         (print_one_breakpoint_location): Use print_thread_id.
9504         * btrace.c (btrace_enable, btrace_disable, btrace_teardown)
9505         (btrace_fetch, btrace_clear): Use print_thread_id.
9506         * common/print-utils.c (CELLSIZE): Delete.
9507         (get_cell): Rename to ...
9508         (get_print_cell): ... this and made extern.  Adjust call callers.
9509         Adjust to use PRINT_CELL_SIZE.
9510         * common/print-utils.h (get_print_cell): Declare.
9511         (PRINT_CELL_SIZE): New.
9512         * gdbthread.h (print_thread_id): Declare.
9513         * infcmd.c (signal_command): Use print_thread_id.
9514         * inferior.c (print_inferior): Use print_thread_id.
9515         * infrun.c (handle_signal_stop)
9516         (insert_exception_resume_breakpoint)
9517         (insert_exception_resume_from_probe)
9518         (print_signal_received_reason): Use print_thread_id.
9519         * record-btrace.c (record_btrace_info)
9520         (record_btrace_resume_thread, record_btrace_cancel_resume)
9521         (record_btrace_step_thread, record_btrace_wait): Use
9522         print_thread_id.
9523         * thread.c (thread_apply_all_command): Use print_thread_id.
9524         (print_thread_id): New function.
9525         (thread_apply_command): Use print_thread_id.
9526         (thread_command, thread_find_command, do_captured_thread_select):
9527         Use print_thread_id.
9528
9529 2016-01-13  Pedro Alves  <palves@redhat.com>
9530
9531         * NEWS: Mention InferiorThread.inferior.
9532         * python/py-infthread.c (thpy_get_inferior): New.
9533         (thread_object_getset): Register "inferior".
9534
9535 2016-01-13  Pedro Alves  <palves@redhat.com>
9536
9537         * NEWS: Mention $_inferior.
9538         * inferior.c (inferior_id_make_value): New.
9539         (inferior_funcs): New.
9540         (_initialize_inferior): Create $_inferior variable.
9541
9542 2016-01-13  Pedro Alves  <palves@redhat.com>
9543
9544         PR breakpoints/19388
9545         * frame.c (get_current_frame): Use validate_registers_access.
9546         * gdbthread.h (validate_registers_access): Declare.
9547         * infrun.c (validate_siginfo_access): Delete.
9548         (siginfo_value_read, siginfo_value_write): Use
9549         validate_registers_access.
9550         * thread.c (validate_registers_access): New function.
9551
9552 2016-01-12  Josh Stone  <jistone@redhat.com>
9553             Philippe Waroquiers  <philippe.waroquiers@skynet.be>
9554
9555         * NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
9556         syscall_entry and syscall_return stop reasons.  Mention GDB
9557         support for remote catch syscall.
9558         * remote.c (PACKET_QCatchSyscalls): New enum.
9559         (remote_set_syscall_catchpoint): New function.
9560         (remote_protocol_features): New element for QCatchSyscalls.
9561         (remote_parse_stop_reply): Parse syscall_entry/return stops.
9562         (init_remote_ops): Install remote_set_syscall_catchpoint.
9563         (_initialize_remote): Config QCatchSyscalls.
9564         * linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
9565
9566 2016-01-12  Yao Qi  <yao.qi@linaro.org>
9567
9568         * nat/linux-ptrace.c (linux_child_function): Cast child_stack
9569         to gdb_byte * and pass to linux_fork_to_function.
9570
9571 2016-01-12  Yao Qi  <yao.qi@linaro.org>
9572
9573         * nat/linux-ptrace.c (linux_fork_to_function): Change type
9574         of argument 'function'.
9575         (linux_grandchild_function): Change return type to 'int'.
9576         Change child_stack's type to 'void *'.
9577         (linux_child_function): Likewise.
9578
9579 2016-01-12  Pedro Alves  <palves@redhat.com>
9580
9581         Remove use of the registered trademark symbol throughout.
9582
9583 2016-01-12  Thomas Schwinge  <thomas@codesourcery.com>
9584
9585         * reply_mig_hack.awk: Rewrite one regular expression.
9586
9587 2016-01-11  Mike Frysinger  <vapier@gentoo.org>
9588
9589         * acinclude.m4: Include new warning.m4 file.
9590         * configure: Regenerated.
9591         * configure.ac: Move all warning logic ...
9592         * warning.m4: ... here.
9593
9594 2016-01-08  Yao Qi  <yao.qi@linaro.org>
9595
9596         * extension.c: Include target.h.
9597         (set_active_ext_lang): Only call install_gdb_sigint_handler,
9598         check_quit_flag, and set_quit_flag if target_terminal_is_ours
9599         returns false.
9600         (restore_active_ext_lang): Likewise.
9601         * target.c (target_terminal_is_ours): New function.
9602         * target.h (target_terminal_is_ours): Declare.
9603
9604 2016-01-07  Maciej W. Rozycki  <macro@imgtec.com>
9605
9606         * mips-tdep.c (mips_breakpoint_from_pc): Rename local `status'
9607         to `err' in the little-endian leg.
9608
9609 2016-01-06  Yao Qi  <yao.qi@linaro.org>
9610
9611         * arch/arm-get-next-pcs.c (arm_get_next_pcs): Move it to some
9612         lines below.
9613         (thumb_get_next_pcs_raw): Make it static.
9614         (arm_get_next_pcs_raw): Likewise.
9615         * arch/arm-get-next-pcs.h (thumb_get_next_pcs_raw): Remove the
9616         declaration.
9617         (arm_get_next_pcs_raw): Likewise.
9618
9619 2016-01-05  Mike Frysinger  <vapier@gentoo.org>
9620
9621         * version.in: Change cvs to git.
9622
9623 2016-01-05  Mike Frysinger  <vapier@gentoo.org>
9624
9625         * configure.tgt (score-*-*): Delete gdb_sim assignment.
9626
9627 2016-01-05  Pedro Alves  <palves@redhat.com>
9628
9629         PR sim/13418
9630         * configure.ac: Define WITH_PPC_SIM when linking in the sim and
9631         the target is powerpc*.
9632         * rs6000-tdep.c (init_sim_regno_table): Check WITH_PPC_SIM instead
9633         of WITH_SIM.
9634         * configure: Regenerate.
9635         * config.in: Regenerate.
9636
9637 2016-01-04  Markus Metzger  <markus.t.metzger@intel.com>
9638
9639         * btrace.c (btrace_pt_readmem_callback): Do not return in TRY/CATCH.
9640
9641 2016-01-02  Mike Frysinger  <vapier@gentoo.org>
9642
9643         * configure.tgt (powerpc*-*-*): Delete test call and
9644         always assign gdb_sim.
9645
9646 2016-01-01  Joel Brobecker  <brobecker@adacore.com>
9647
9648         Update year range in copyright notice of all files.
9649
9650 2016-01-01  Joel Brobecker  <brobecker@adacore.com>
9651
9652         * top.c (print_gdb_version): Change copyright year in version
9653         message.
9654
9655 2016-01-01  Joel Brobecker  <brobecker@adacore.com>
9656
9657         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015.
9658
9659 For older changes see ChangeLog-2015.
9660 \f
9661 Local Variables:
9662 mode: change-log
9663 left-margin: 8
9664 fill-column: 74
9665 version-control: never
9666 coding: utf-8
9667 End: