1 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
3 * configure.in: Replaces obsolete gdbtk-variable.c with
5 * configure: Regenerate.
6 * Makefile.in: Remove obsolete/extraneous references to
9 2000-02-16 Mark Kettenis <kettenis@gnu.org>
11 * target.c (do_target_signal_to_host): Do not use REALTIME_LO in
12 the conversion of the signal number. TARGET_SIGNAL_REALTIME_33 is
13 33 by definition, whereas REALTIME_LO might be 32 on systems that
14 have SIG32 such as Linux. Make sure that the signal number
15 returned is within the range specified by REALTIME_LO and
18 2000-02-16 Mark Kettenis <kettenis@gnu.org>
20 * configure: Regenerated.
22 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
24 * arm-tdep.c (set_disassembly_flavor, arm_othernames,
25 _initialize_arm_tdep): Allows the user to choose between any of
26 the flavors available for the disassembly to be used in the "info
27 reg" command and elsewhere in gdb. It prevents having to maintain
28 this information in two places by using the data kept in the
31 2000-02-09 Mark Kettenis <kettenis@gnu.org>
33 * configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
34 prfpregset_t in <sys/procfs.h>.
35 * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
37 * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
38 prgregset_t and prfpregset_t if they are not already present.
40 Wed Feb 16 19:00:02 2000 Andrew Cagney <cagney@b1.cygnus.com>
42 From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
43 * procfs.c: Define MERGEPID if not defined. For osf4.0e.
45 2000-02-15 Jason Molenda (jsm@bugshack.cygnus.com)
47 * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
50 2000-02-15 Kevin Buettner <kevinb@redhat.com>
53 * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
54 to correct value for generic dummy frames. When using
55 generic dummy frames, don't attempt to write TOC value or
56 function to call into the call dummy.
57 (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
58 code to also handle the PowerOpen ABI.
59 (ppc_push_return_address): Enable for all ports.
60 * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
61 PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER,
62 CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
63 CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
64 provided by generic RS6000 definitions so that call dummies
65 are implemented using generic dummy frames instead.
67 * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
68 prior to changing the stack pointer via ptrace(). Also, ignore
69 attempts to store to undefined registers that are less than
72 * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
73 frame from 436 to 448 to account for alignment padding.
74 (rs6000_push_arguments): Obtain actual register size instead
75 of assuming the register is 4 bytes long. [There's still
76 more work to be done to totally remove the 4 byte assumption,
77 however.] Make sure the stack is 16 byte aligned as required
78 by the PowerOpen ABI. Also, make sure that small structures
79 passed in registers are properly aligned within the register.
81 2000-02-15 Jesper Skov <jskov@cygnus.co.uk>
83 Patch applied by Kevin Buettner <kevinb@redhat.com>
85 * rs6000-tdep.c (skip_prologue): skip copying of argument
86 registers to local variable registers.
88 2000-02-14 Jim Kingdon <kingdon@redhat.com>
90 * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale. A
91 sym->section->index number is not a SECT_OFF_* code.
93 Tue Feb 15 12:07:30 2000 Andrew Cagney <cagney@b1.cygnus.com>
95 * MAINTAINERS (write after approval): Add H.J. Lu.
97 2000-02-14 Nick Clifton <nickc@cygnus.com>
99 * sh-tdep.c: Remove extraneous code.
101 2000-02-14 Amit S. Kale <akale@veritas.com>
103 * elfread.c (elf_symtab_read): Move the use of sym to after where
105 Checked in by Jim Kingdon <kingdon@redhat.com>
107 Mon Feb 14 15:39:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
109 * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.
111 Mon Feb 14 15:20:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
113 From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
114 * dwarf2read.c: (die_is_declaration): New fn.
115 (read_structure_scope): Use it.
117 * dwarf2read.c: (die_is_declaration): Convert to ISO-C.
119 2000-02-10 J.T. Conklin <jtc@redback.com>
121 * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
122 * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
124 * gdbserver/low-nbsd.c: New file.
126 * gdbserver/Makefile.in: convert to autoconf.
127 * gdbserver/configure.in: likewise.
128 * gdbserver/configure: generate.
130 Sun Feb 13 11:21:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
132 * CONTRIBUTE: New file. How to contribute to GDB.
134 Sun Feb 13 10:34:48 2000 Andrew Cagney <cagney@b1.cygnus.com>
136 * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners. Add Kevin
137 Buettner to powerpc maintainers. Make Kevin Buettner the
138 GNU/LINUX PPC native maintainer. Add J.T. Conklin, Jim Kingdon
139 and Jason Molenda to write after aproval list.
141 Sun Feb 13 10:18:44 2000 Andrew Cagney <cagney@b1.cygnus.com>
143 * MAINTAINERS: Reformat. Separate into check-in categories.
145 Sat Feb 12 01:08:21 EST 2000 Nicholas Duffek <nsd@cygnus.com>
147 * uw-thread.c: Remove __FUNCTION__ GNUism.
149 2000-01-17 Amit S. Kale <akale@veritas.com>
151 * elfread.c (elf_symtab_read): Use offset for the section in which a
152 symbol resides, instead of .text section for calculating address of a
154 Checked in by Jim Kingdon <kingdon@redhat.com>
156 2000-02-10 Mark Kettenis <kettenis@gnu.org>
158 * gnu-nat.c: Remove hackery to include <bits/waitflags.h>. It is
159 no longer necessary now we have gdb_wait.h.
161 2000-02-09 Mark Kettenis <kettenis@gnu.org>
163 * gnu-nat.c (proc_string): Make global.
164 (do_mach_notify_dead_name): Suppress dead name notifications if we
165 know that the task is dead.
167 1999-12-13 Mark Kettenis <kettenis@gnu.org>
169 * gnu-nat.c (inf_validate_task_sc): Get task info via proc server
170 instead of directly from the kernel. Add some hackery to make
171 sure that the info isn't influenced by suspension of the task in
172 the proc server itself.
174 2000-02-10 Jim Kingdon <kingdon@redhat.com>
176 * defs.h (MERGEPID): Added. Patch submitted by Andrew Hobson and
177 approved by Michael Snyder.
179 2000-02-09 Mark Kettenis <kettenis@gnu.org>
181 * linux-thread.c: Include defs.h before gdb_wait.h.
183 Wed Feb 9 18:59:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
185 * Makefile.in (wait_h): Delete macro. Update all dependencies
186 specifying gdb_wait.h instead.
188 * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
189 remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
190 remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
191 convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
192 remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
193 remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
194 remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
195 ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
196 infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
197 fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
199 * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.
201 * gdb_wait.h: New file. Based on ../include/wait.h. Include
202 <sys/wait.h> or <wait.h> and then define any missing WIF macros.
204 Wed Feb 9 01:14:54 2000 Andrew Cagney <cagney@amy.cygnus.com>
206 * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
207 * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
208 (d10v_stack_align): Declare.
209 * d10v-tdep.c (d10v_stack_align): Define.
211 1999-08-23 J.T. Conklin <jtc@redback.com>
213 * top.c (remote_timeout): Change default to 2. Add comment
214 explaining history of changes to the default value.
215 * remote.c (_initialize_remote): Remove code that adds set/
216 show remotetimeout, as that's also done in top.c
218 1999-10-18 J.T. Conklin <jtc@redback.com>
220 * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
221 Return E01 instead of P01 when 'P' command fails.
223 2000-02-05 J.T. Conklin <jtc@redback.com>
225 * remote.c (putpkt_binary): Handle NAK from target stub.
227 2000-02-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
229 * configure.in: Remove the addition of sol-thread.c to the
230 CONFIG_INITS list. This caused problems with init.c, because
231 sol-thread.c would be grepped twice for _initialize_* functions.
233 * Makefile.in: Add FIXME for init.c.
235 2000-02-07 Jim Kingdon <kingdon@redhat.com>
237 Clean up compiler warnings:
238 * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
239 stack.c, valprint.c: Change variables to unsigned.
240 * bcache.c: Rearrange to avoid warnings about variables not being set.
241 * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
242 rather than declaring print_max and repeat_count_threashold
243 ourselves (incorrectly).
244 * valprint.h: Do declare repeat_count_threashold.
245 * ch-exp.c: Use default case for internal error.
246 * findvar.c: Don't omit argument type.
247 * symtab.c: Remove unused variable.
249 2000-02-04 Jim Blandy <jimb@redhat.com>
251 * c-typeprint.c (remove_qualifiers): New function.
252 (c_type_print_base): Use it to remove qualifiers from C++
253 qualified names, not strrchr.
255 * c-typeprint.c (c_type_print_base): Recognize type conversion
256 operators by calling is_type_conversion_operator.
257 (is_type_conversion_operator): New function.
259 2000-02-04 Nick Clifton <nickc@cygnus.com>
261 * config/arm/tm-arm.h (LOWEST_PC): Define.
263 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
265 * infrun.c (resume): Make just one call to target_resume(), instead
266 of four: set up correct parameters in all the cases ahead of time,
267 and do call at the end.
269 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
271 * config/powerpc/tm-ppc-eabi.h: Define
272 SOFUN_ADDRESS_MAYBE_MISSING.
274 2000-02-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
276 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
279 Fri Feb 4 22:42:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
281 * Makefile.in (INIT_FILES): Append CONFIG_INITS
282 * configure.in (CONFIG_INIT): Initialize.
283 (links): Link srcdir/gdbtk/library to gdbtcl2.
284 * gdbtcl2: Moved to gdbtk/library.
285 ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
286 gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
287 gdbtk.h: Moved to gdbtk/generic.
289 2000-02-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
291 * printcmd.c (build_address_symbolic): New function. Returns all
292 the parts that are necessary to print an address in a symbolic
294 (print_address_symbolic): Split into a printing part and an
295 information building part, build_address_symbolic().
297 * defs.h (build_address_symbolic): Export.
299 2000-02-03 Jim Blandy <jimb@redhat.com>
301 * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
304 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
306 * arm-tdep.c (arm_push_arguments): Fix passing of floating point
307 arguments on dummy frames.
309 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
311 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
312 (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
314 2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
316 * remote.c (getpkt_sane): New function. It is the old getpkt(),
317 which now returns a timeout indication.
318 (getpkt): New function. Wrapper for getpkt_sane(), so that return
319 value can still be ignored.
321 Tue Feb 1 18:47:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
323 * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
326 Tue Feb 1 00:17:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
328 * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c. Rename
329 ``struct gdb_file'' to ``struct ui_file''. Delete typedef
332 * Makefile.in: Update.
334 * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
335 c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
336 ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
337 cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
338 expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
339 frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
340 gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
341 jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
342 m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
343 printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
344 remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
345 ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
346 serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
347 target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
348 utils.c, v850ice.c, valprint.c, valprint.h, value.h,
349 config/pa/tm-hppa.h: Update.
350 * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
352 2000-01-31 Jason Molenda (jsm@bugshack.cygnus.com)
354 * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
355 config/i386/i386dgux.mh, config/i386/i386sol2.mh,
356 config/i386/i386v4.mh, config/i386/i386v42mp.mh,
357 config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
358 config/m88k/delta88v4.mh, config/mips/irix4.mh,
359 config/mips/irix5.mh, config/mips/mipsv4.mh,
360 config/powerpc/solaris.mh (NATDEPFILES): Change references to
361 proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
362 proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
364 Mon Jan 31 17:14:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
366 * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
368 * main.c (captured_main): Only use the legacy tui_file code when
369 linking in older code such as the TUI.
371 * gdb-file.h, gdb-file.c: New files.
372 * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
373 null_file_isatty, null_file_rewind, null_file_put,
374 null_file_flush, null_file_write, null_file_fputs,
375 null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
376 gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
377 set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
378 set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
379 set_gdb_file_data, struct accumulated_gdb_file,
380 do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
381 mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
382 mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
383 stdio_file_delete, stdio_file_flush, stdio_file_write,
384 stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
385 Moved to gdb-file.h and gdb-file.c.
386 * utils.c (enum streamtype, struct tui_stream, tui_file_new,
387 tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
388 tui_file_rewind, tui_file_put, tui_file_fputs,
389 tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
390 fputs_unfiltered_hook):
391 Moved to tui/tui-file.c and tui/tui-file.h.
393 * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
394 (tui-file.o, gdb-file.o): Add dependencies.
395 (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
396 * main.c: #include tui/tui-file.h.
398 2000-01-28 Fred Fish <fnf@cygnus.com>
400 * findvar.c (value_from_register): Special case handling of D10V
401 pointer values fetched from registers.
403 2000-01-28 Fernando Nasser <fnasser@totem.to.cygnus.com>
405 * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
406 support for new style thumb prologues.
408 2000-01-28 Nick Clifton <nickc@redhat.com>
410 * arm-tdep.c: Remove extraneous dash at start of strings
411 introduced in previous delta.
413 2000-01-27 Nick Clifton <nickc@redhat.com>
415 * arm-tdep.c: Replace uses of arm_toggle_renames() with
416 parse_arm_disassembler_option().
418 2000-01-27 Jim Blandy <jimb@cygnus.com>
420 * symtab.c (decode_line_1): Don't let commas that are within
421 quotes or parenthesis terminate the line spec. Don't use pp when
422 removing the final double quote of a double-quoted string. Don't
423 forget to skip the opening double quote. I have no clue whether
424 this change is correct; probably we've just moved this function
425 from one buggy place to another buggy place, and never came within
426 an outhouse whiff of correctness.
427 (find_toplevel_char): New function.
429 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
431 * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
432 passing the pointer to a thumb function as an argument.
434 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
436 * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
437 are reinserted for another run.
439 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
441 * cli-out.c (cli_filed_string): Test for NULL string.
443 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
445 * infcmd.c (run_stack_dummy): Account for a random signal stopping
446 the inferior as well as breakpoints being hit while performing an
447 inferior function call.
448 * valops.c (hand_function_call): Ditto.
450 2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
452 From Mark Kettenis <kettenis@gnu.org>
454 * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
455 i386_REGS_SEGS_STATE.
456 (HAVE_I387_REGS): Define.
457 (FLOAT_INFO): Remove.
458 * i386gnu-nat.c: Almost completely rewritten to use new i386
459 register layout and `float info' implementation.
460 * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
461 Move prototypes from here.
462 * gnu-nat.h: To here.
464 2000-01-24 Kevin Buettner <kevinb@redhat.com>
466 * utils.c (get_field, put_field): Fix buffer underruns and
467 overruns. Also, handle case where total_len is not evenly
469 (getfield): Make sure zeroing of unwanted bits occurs even
470 when bit field to extract does not straddle two or more
473 2000-01-23 Christopher Faylor <cgf@cygnus.com>
475 * defs.h: Add gdb_thread_select declaration.
477 2000-01-23 Kevin Buettner <kevinb@redhat.com>
479 * linux-thread.c (_initialize_linuxthreads): Make sure that
480 linuxthreads_block_mask does not block SIGCHLD.
482 2000-01-20 Fernando Nasser <fnasser@totem.to.cygnus.com>
484 * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
485 text so that new lines work properly.
487 2000-01-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
489 * proc-utils.h: New file. Export functions from proc-*.c.
491 * proc_api.c: Rename to:
492 * proc-api.c: New file. Add include of proc-utils.h.
494 * proc_events.c: Rename to:
495 * proc-events.c: New file.
497 * proc_flags.c: Rename to:
498 * proc-flags.c: New file.
500 * proc_why.c: Rename to:
501 * proc-why.c: New file. Add include of proc-utils.h.
503 * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
504 ctype.h, proc-utils.h.
505 (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
506 (open_procinfo_files): Conditionalize local variable tmp, to avoid
508 (proc_iterate_over_mappings): Conditionalize local vars mapfd and
510 (procfs_wait): Adjust format in some printf_filetered calls to
511 avoid compiler warnings.
512 (make_signal_thread_runnable): Ifdef 0. The calls to this function
514 (procfs_resume): Add parentheses around '&&' operation.
515 (procfs_set_exec_trap): Remove unused variable.
516 (info_proc_cmd): Add braces to avoid ambiguous else clause.
518 * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
519 proc-why.o): Update dependencies.
521 * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
524 2000-01-17 Jason Molenda (jsm@bugshack.cygnus.com)
526 * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
527 Fix from Robert Lipe <robertl@sco.com>.
528 * configure: Regenerated.
530 2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
532 * stack.c (print_frame_info_base): Break up into the frame info
533 (location) printing part and the rest (source line printing).
534 (print_frame): New function. Take care of printing the location
538 * infrun.c (normal_stop): Use enum values rather than integers for the
539 source_flag to be passed to show_and_print_stack_frame().
542 * frame.h (print_what): New enum for 'source' argument to
543 print_frame_info_base(). Use this instead of obscure numbers.
546 Sun Jan 16 17:58:00 2000 David Taylor <taylor@texas.cygnus.com>
548 * event-top.c (stdin_event_handler): call quit_command rather than
549 exit -- run cleanups, give target code a chance to say goodbye to
550 the target. Fixes bug where the inferior processes were left
551 around on Solaris (and probably elsewhere) by the testsuite.
553 2000-01-14 Mark Salter <msalter@cygnus.com>
555 * v850-tdep.c (v850_target_architecture_hook): Setup correct
556 machine id for disassembly.
558 2000-01-13 Jim Blandy <jimb@cygnus.com>
560 * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
561 convert_to_regset, when regno indicates a specific register.
563 Thu Jan 13 23:34:17 EST 2000 Nicholas Duffek <nsd@cygnus.com>
565 * uw-thread.c: Document libthread.so debugging interface. Minor
566 comment and formatting tweaks.
567 (DEBUG): #define as 0 instead of 1.
568 (CALL_BASE): Include function name in error msg.
569 (libthread_stub): Adjust inferior_pid after thread exit.
570 (uw_thread_create_inferior): Deactivate uw_thread_ops before
571 asking procfs_ops to create inferior.
572 (libthread_init): Don't return nonlocally on error.
574 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
576 * rdi-share/ardi.c (negotiate_params): Fix initialization of static
579 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
581 * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
582 both sides are on the same state.
584 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
586 * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
587 115200 (minor syntax mistake).
589 2000-01-12 Jim Blandy <jimb@cygnus.com>
591 * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
592 this here, to go along with the definitions of PIDGET and TIDGET.
594 2000-01-12 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
596 * thread.c (do_captured_thread_select): New function. Switch
597 current thread, safely from within catch_errors().
598 (gdb_thread_select): New function. Switch threads safely.
599 (thread_command): Use gdb_thread_select().
601 (do_captured_list_thread_ids): New function.
602 (gdb_list_thread_ids): New function.
604 * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
606 2000-01-11 Christopher Faylor <cgf@cygnus.com>
608 * configure.in: Avoid linking -limagehlp unless it's a native build.
609 * configure: Regenerate.
610 * thread.cc (add_thread): Clear private data pointer here or suffer
611 strange behavior when it is checked for NULL later.
613 2000-01-09 Christopher Faylor <cgf@cygnus.com>
615 * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
616 * configure.in: Add an additional library to cygwin link.
617 * configure: Regenerate.
619 Patch from Egor Duda <deo@logos-m.ru>:
620 * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
623 2000-01-07 Michael Snyder <msnyder@cleaver.cygnus.com>
625 * uw-thread.c: New file to support UnixWare user-mode threads:
626 contributed by Nickolas Duffek <nsd@cygnus.com>.
627 * target.h (struct target_ops): New vector, to_extra_thread_info,
628 allows back-ends to give extra details in info thread display.
629 (target_extra_thread_info): define new macro.
630 (target_find_new_threads): simplify macro. Cleanup comments.
631 * target.c (to_extra_thread_info): default and inherit new vector.
632 (cleanup_target): eliminate PARAMS, break up long lines,
633 provide default definition for to_extra_thread_info, and
634 to_find_new_threads. Default to_thread_alive and to_query
635 to return_zero, not target_ignore (they each return int not void).
636 (debug_to_find_new_threads): new debug entry.
637 (setup_target_debug): add debug_to_find_new_threads.
638 * gdbthread.h: export struct thread_info, find_thread_pid, and
639 iterate_over_threads. Add comments. Eliminate PARAMS. Update
640 copyright. Add new private data pointer for use by target back-ends.
641 * thread.c (struct thread_info): move definition to gdbthread.h.
642 (find_thread_pid): new exported function for thread lookup.
643 (iterate_over_threads): new exported function for applying
644 arbitrary operations to threads. Update copyright to 2000.
645 (info_threads_command): use new target_extra_thread_info vector
646 to display extra information about each thread (if implemented).
647 * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
648 Add defines for PIDGET, etc.
649 * config/i386/tm-i386sol2.h: ditto.
650 * config/sparc/tm-sun4sol2.h: ditto.
651 * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
652 * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
653 if -lpthread and -lpthreads fail.
655 * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
656 (proc_flags): combine flags that UnixWare splits into two locations.
657 (proc_modify_flag): add support for PR_KLC (kill on last close).
658 (proc_[un]set_kill_on_last_close): new functions.
660 2000-01-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
662 * infrun.c (normal_stop): Print out thread id when we stop.
664 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
666 * remote.c (remote_open_1): Fix message so it does not imply a
667 specific syntax for serial ports, as it is OS dependent.
668 (remote_async_open_1): Ibid.
669 (init_remote_ops): Ibid.
671 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
673 * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
674 "set remotebaud" command (if set) when no speed is specified on
675 the "target rdi" command.
677 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
679 * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
681 (baud_options[]): Ibid.
683 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
685 * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
686 used by each operating system.
688 2000-01-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
690 * breakpoint.c (until_break_command): Add an argument for the
691 continuation, the beginning of the cleanups set up by this
693 (until_break_command_continuation): Do cleanups until the one
694 passed in as argument instead of doing all of them.
696 * infcmd.c (finish_command_continuation): Expect a new argument,
697 which indicates up to where to do cleanups. Update calls to
698 do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
699 (finish_command): Add another argument for the continuation: the
700 starting cleanup for this command.
702 2000-01-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
704 From Grant Edwards <grante@visi.com> (original patch from Thomas
706 * rdi-share/ardi.c: Allow interruption of interruptible
707 targets with a <CNTL-C>.
709 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
711 * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
712 to control port to accommodate some versions of Angel.
714 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
716 * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
717 Add interpretation for C Support Library packets.
719 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
721 * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
722 is now being modified.
723 * rdi-share/devsw.h: Adjust declaration of the above funtion.
725 For older changes see ChangeLog-99
731 version-control: never