1 2015-04-01 Pedro Alves <palves@redhat.com>
3 * infrun.c (keep_going): Also discard cleanups if inserting
6 2015-04-01 Pedro Alves <palves@redhat.com>
8 * infrun.c (wait_for_inferior): Install the
9 finish_thread_state_cleanup cleanup across the whole function, not
10 just around handle_inferior_event.
12 2015-04-01 Pedro Alves <palves@redhat.com>
14 * infrun.c (resume) <step past permanent breakpoint>: Use
17 2015-04-01 Pedro Alves <palves@redhat.com>
19 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
21 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
23 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
25 2015-04-01 Pedro Alves <palves@redhat.com>
27 * linux-thread-db.c (record_thread): Readd the thread to gdb's
28 list if it was marked exited.
30 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
32 * configure: Regenerated.
34 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
35 Jan Kratochvil <jan.kratochvil@redhat.com>
36 Oleg Nesterov <oleg@redhat.com>
39 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
40 New enum identifying the various options of the coredump_filter
42 (struct smaps_vmflags): New struct.
43 (use_coredump_filter): New variable.
44 (decode_vmflags): New function.
45 (mapping_is_anonymous_p): Likewise.
46 (dump_mapping_p): Likewise.
47 (linux_find_memory_regions_full): New variables
48 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
49 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
50 parsing of its information. Implement memory mapping filtering
51 based on its contents.
52 (show_use_coredump_filter): New function.
53 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
54 * NEWS: Mention the possibility of using the
55 '/proc/PID/coredump_filter' file when generating a corefile.
56 Mention new command 'set use-coredump-filter'.
58 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
60 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
61 read_memory_unsigned_integer.
63 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
65 * Makefile.in (ZLIB): New.
67 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
69 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
71 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
72 * top.c (print_gdb_configuration): Remove --with-zlib and
74 * config.in: Regenerated.
75 * configure: Likewise.
77 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
79 * NEWS: Mention info os cpus support.
80 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
81 (struct osdata_type): Add cpus entry, reorder the entries in
84 2015-03-31 Matthias Klose <doko@ubuntu.com>
86 * compile/compile.c (compile_to_object): Allow triplets with or
89 2015-03-30 Doug Evans <dje@google.com>
92 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
95 2015-03-30 Gary Benson <gbenson@redhat.com>
97 * remote.c (remote_mourn_1): Remove function. Update all callers
99 (extended_remote_mourn_1): Remove function. Update all callers
100 to use extended_remote_mourn.
101 (extended_remote_attach_1): Remove function. Update all callers
102 to use extended_remote_attach.
104 2015-03-28 James Bowman <james.bowman@ftdichip.com>
106 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
107 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
108 (ALLDEPFILES): Add ft32-tdep.c.
109 * configure.tgt: Add FT32 entry.
110 * ft32-tdep.c: New file, FT32 target-dependent code.
111 * ft32-tdep.h: New file, FT32 target-dependent code.
113 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
116 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
118 * printcmd.c (print_command_1): Move expr variable scope.
120 2015-03-27 Joel Brobecker <brobecker@adacore.com>
122 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
124 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
126 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
129 2015-03-26 Joel Brobecker <brobecker@adacore.com>
131 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
132 exception raised while parsing the probe arguments.
133 Force parsing to be done using the C language parser.
134 * expression.h (parse_expression_with_language): Declare.
135 * parse.c (parse_expression_with_language): New function.
137 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
139 * MAINTAINERS (Write After Approval): Add "Jon Turney".
141 2015-03-26 Andy Wingo <wingo@igalia.com>
144 * dwarf2read.c (struct partial_die_info): Add has_const_value
146 (add_partial_symbol): Don't punt on symbols that have const_value
148 (read_partial_die): Detect DW_AT_const_value.
150 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
153 * printcmd.c (print_command_1): Move expr variable scope.
155 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
158 * printcmd.c (validate_format): Make the parameter cmdname const.
160 2015-03-26 Don Breazeal <donb@codesourcery.com>
162 * remote.c (_initialize_remote): Update comment.
164 2015-03-26 Pedro Alves <palves@redhat.com>
165 Jon TURNEY <jon.turney@dronecode.org.uk>
167 * coffread.c (coff_symfile_read): When constructing the name of an
168 import stub symbol from import symbol for amd64, only skip the
169 char after _imp_ if the target is underscored (like i386) and the
170 char is indeed the target's leading char.
172 2015-03-25 Pedro Alves <palves@redhat.com>
174 * target.h <to_async>: Replace 'callback' and 'context' parameters
175 with boolean 'enable' parameter.
176 (target_async): Replace CALLBACK and CONTEXT parameters with
177 boolean ENABLE parameter.
178 * inf-loop.c (inferior_event_handler): Adjust.
179 * linux-nat.c (linux_nat_attach, linux_nat_resume)
180 (linux_nat_resume): Adjust.
181 (async_client_callback, async_client_context): Delete.
182 (handle_target_event): Call inferior_event_handler directly.
183 (linux_nat_async): Replace 'callback' and 'context' parameters
184 with boolean 'enable' parameter. Adjust. Remove references to
185 async_client_callback and async_client_context.
186 (linux_nat_close): Adjust.
187 * record-btrace.c (record_btrace_async): Replace 'callback' and
188 'context' parameters with boolean 'enable' parameter. Adjust.
189 (record_btrace_resume): Adjust.
190 * record-full.c (record_full_async): Replace 'callback' and
191 'context' parameters with boolean 'enable' parameter. Adjust.
192 (record_full_resume, record_full_core_resume): Adjust.
193 * remote.c (struct remote_state) <async_client_callback,
194 async_client_context>: Delete fields.
195 (remote_start_remote, extended_remote_attach_1, remote_resume)
196 (extended_remote_create_inferior): Adjust.
197 (remote_async_serial_handler): Call inferior_event_handler
199 (remote_async): Replace 'callback' and 'context' parameters with
200 boolean 'enable' parameter. Adjust.
201 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
203 * target-delegates.c: Regenerate.
205 2015-03-25 Gary Benson <gbenson@redhat.com>
206 Pedro Alves <palves@redhat.com>
208 * target.c (fileio_ft_t): New typedef, define object vector.
209 (fileio_fhandles): New static variable.
210 (is_closed_fileio_fh): New macro.
211 (lowest_closed_fd): New static variable.
212 (acquire_fileio_fd): New function.
213 (release_fileio_fd): Likewise.
214 (fileio_fd_to_fh): New macro.
215 (target_fileio_open): Wrap the file descriptor on success.
216 (target_fileio_pwrite): Updated to use wrapped file descriptor.
217 (target_fileio_pread): Likewise.
218 (target_fileio_close): Likewise.
220 2015-03-24 Pedro Alves <palves@redhat.com>
222 * thread.c (thread_apply_all_command): Take exited threads into
225 2015-03-24 Pedro Alves <palves@redhat.com>
227 * infrun.c (resume, proceed): Mention
228 switch_back_to_stepped_thread, not switch_back_to_stepping.
230 2015-03-24 Pedro Alves <palves@redhat.com>
232 * infrun.c (user_visible_resume_ptid): Rewrite going from
233 most-locked to unlocked instead of the opposite. Move comment ...
234 * infrun.h (user_visible_resume_ptid): ... here.
236 2015-03-24 Pedro Alves <palves@redhat.com>
238 * linux-nat.c (linux_nat_resume): Output debug logs before trying
239 to resume the event lwp. Use the lwp's ptid instead of the passed
240 in (maybe wildcard) ptid.
241 (stop_wait_callback): Tweak debug log output.
242 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
244 (linux_nat_filter_event): In debug output, distinguish a
245 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
246 before trying to resume the lwp.
248 2015-03-24 Joel Brobecker <brobecker@adacore.com>
250 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
252 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
253 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
255 2015-03-24 Joel Brobecker <brobecker@adacore.com>
257 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
258 Renames DYN_ATTR_DATA_LOCATION.
259 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
260 DYN_ATTR_DATA_LOCATION.
261 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
262 instead of DYN_ATTR_DATA_LOCATION.
264 2015-03-24 Pedro Alves <palves@redhat.com>
266 * breakpoint.c (until_break_command): Adjust call to proceed.
267 * gdbthread.h (struct thread_control_state) <stepping_command>:
269 * infcall.c (run_inferior_call): Adjust call to proceed.
270 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
271 Adjust calls to proceed.
272 (set_step_frame): Set the current thread's step_start_function
274 (step_once): Adjust calls to proceed.
275 (jump_command, signal_command, until_next_command)
276 (finish_backward, finish_forward, proceed_after_attach_callback)
277 (attach_command_post_wait): Adjust calls to proceed.
278 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
279 (do_target_resume): New function, factored out from ...
280 (resume): ... here. Remove 'step' parameter. Instead, check
281 currently_stepping to determine whether the thread should be
283 (proceed): Remove 'step' parameter and don't set the thread's
284 step_start_function here. Adjust call to 'resume'.
285 (handle_inferior_event): Adjust calls to 'resume'.
286 (switch_back_to_stepped_thread): Use do_target_resume instead of
288 (keep_going): Adjust calls to 'resume'.
289 * infrun.h (proceed): Remove 'step' parameter.
291 * windows-nat.c (do_initial_windows_stuff): Adjust call to
293 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
295 2015-03-24 Pedro Alves <palves@redhat.com>
297 * gdbthread.h (struct thread_control_state) <stepping_command>:
299 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
300 the thread's stepping_command field.
301 * infrun.c (resume): Check the thread's stepping_command flag to
302 determine which threads should be resumed. Rename 'entry_step'
304 (clear_proceed_status_thread): Clear 'stepping_command'.
305 (schedlock_applies): Change parameter type to struct thread_info
307 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
308 (switch_back_to_stepped_thread): Adjust calls to
310 (_initialize_infrun): Adjust "set scheduler-locking step" help.
312 2015-03-24 Pedro Alves <palves@redhat.com>
314 * infrun.c (step_start_function): Delete and ...
315 * gdbthread.h (struct thread_control_state) <step_start_function>:
316 ... now a field here.
317 * infrun.c (clear_proceed_status_thread): Clear the thread's
319 (proceed, process_event_stop_test, print_stop_event): Adjust.
321 2015-03-24 Pedro Alves <palves@redhat.com>
323 * infrun.c (proceed): No longer handle negative step.
325 2015-03-24 Gary Benson <gbenson@redhat.com>
327 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
328 (x86_linux_prepare_to_resume): Likewise.
329 * x86-linux-nat.c (x86_linux_new_thread):
330 Moved to nat/x86-linux.c.
331 (x86_linux_prepare_to_resume): Likewise.
332 * nat/x86-linux.c (x86_linux_new_thread): New function.
333 (x86_linux_prepare_to_resume): Likewise.
335 2015-03-24 Gary Benson <gbenson@redhat.com>
337 * nat/x86-linux-dregs.h: New file.
338 * nat/x86-linux-dregs.c: Likewise.
339 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
340 (x86-linux-dregs.o): New rule.
341 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
342 * config/i386/linux64.mh (NATDEPFILES): Likewise.
343 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
344 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
345 (x86_linux_dr_get): Likewise.
346 (x86_linux_dr_set): Likewise.
347 (x86_linux_dr_get_addr): Likewise.
348 (x86_linux_dr_get_control): Likewise.
349 (x86_linux_dr_get_status): Likewise.
350 (update_debug_registers_callback): Likewise.
351 (x86_linux_dr_set_control): Likewise.
352 (x86_linux_dr_set_addr): Likewise.
353 (x86_linux_update_debug_registers): Likewise.
355 2015-03-24 Gary Benson <gbenson@redhat.com>
357 * x86-linux-nat.c (x86_linux_update_debug_registers):
358 New function, factored out from...
359 (x86_linux_prepare_to_resume): ...this.
361 2015-03-24 Gary Benson <gbenson@redhat.com>
363 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
364 (x86_linux_dr_set): Likewise.
365 (x86_linux_dr_get_addr): Likewise.
366 (x86_linux_dr_get_control): Likewise.
367 (x86_linux_dr_get_status): Likewise.
368 (update_debug_registers_callback): Likewise.
369 (x86_linux_dr_set_control): Likewise.
370 (x86_linux_dr_set_addr): Likewise.
371 (x86_linux_prepare_to_resume): Likewise.
372 (x86_linux_new_thread): Likewise.
374 2015-03-24 Gary Benson <gbenson@redhat.com>
376 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
377 (x86_linux_new_thread): Rename argument.
379 2015-03-24 Gary Benson <gbenson@redhat.com>
381 * nat/x86-linux.h: New file.
382 * nat/x86-linux.c: Likewise.
383 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
384 (x86-linux.o): New rule.
385 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
386 * config/i386/linux64.mh (NATDEPFILES): Likewise.
387 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
388 (lwp_set_arch_private_info): New declaration.
389 (lwp_arch_private_info): Likewise.
390 * linux-nat.c (lwp_set_arch_private_info): New function.
391 (lwp_arch_private_info): Likewise.
392 * x86-linux-nat.c: Include nat/x86-linux.h.
393 (arch_lwp_info): Removed structure.
394 (update_debug_registers_callback):
395 Use lwp_set_debug_registers_changed.
396 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
397 and lwp_set_debug_registers_changed.
398 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
400 2015-03-24 Gary Benson <gbenson@redhat.com>
402 * nat/linux-nat.h (ptid_of_lwp): New declaration.
403 (lwp_is_stopped): Likewise.
404 (lwp_stop_reason): Likewise.
405 * linux-nat.c (ptid_of_lwp): New function.
406 (lwp_is_stopped): Likewise.
407 (lwp_is_stopped_by_watchpoint): Likewise.
408 * x86-linux-nat.c (update_debug_registers_callback):
410 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
413 2015-03-24 Gary Benson <gbenson@redhat.com>
415 * linux-nat.h (linux_stop_lwp): Move declaration to...
416 * nat/linux-nat.h (linux_stop_lwp): New declaration.
418 2015-03-24 Gary Benson <gbenson@redhat.com>
420 * linux-nat.h: Include nat/linux-nat.h.
421 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
422 * nat/linux-nat.h (struct lwp_info): New forward declaration.
423 (iterate_over_lwps_ftype): New typedef.
424 (iterate_over_lwps): New declaration.
425 * linux-nat.h (iterate_over_lwps): Update comment. Use
426 iterate_over_lwps_ftype. Update callback return value check.
428 2015-03-24 Gary Benson <gbenson@redhat.com>
430 * x86-nat.h (x86_debug_reg_state): Move declaration to...
431 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
433 2015-03-24 Gary Benson <gbenson@redhat.com>
435 * nat/linux-nat.h (current_lwp_ptid): New declaration.
436 * linux-nat.c (current_lwp_ptid): New function.
437 * x86-linux-nat.c: Include nat/linux-nat.h.
438 (x86_linux_dr_get_addr): Use current_lwp_ptid.
439 (x86_linux_dr_get_control): Likewise.
440 (x86_linux_dr_get_status): Likewise.
441 (x86_linux_dr_set_control): Likewise.
442 (x86_linux_dr_set_addr): Likewise.
444 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
447 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
449 2015-03-23 Joel Brobecker <brobecker@adacore.com>
451 * ser-mingw.c (ser_windows_setparity): Fix indentation.
452 * ser-unix.c (hardwire_setparity): Likewise.
454 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
456 * NEWS: Mention set/show serial parity command.
457 * monitor.c (monitor_open): Call serial_setparity.
458 * remote.c (remote_open_1): Likewise.
459 * ser-base.c (ser_base_serparity): New function.
460 * ser-base.h (ser_base_setparity): Add declaration.
461 * ser-go32.c (dos_ops): Set "setparity" field.
462 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
464 (ser_windows_setparity): New function.
465 (hardwire_ops): Add ser_windows_setparity.
466 (tty_ops): Add NULL for setparity field.
467 (pipe_ops): Add ser_base_setparity.
469 * ser-pipe.c (pipe_ops): Likewise.
470 * ser-tcp.c (tcp_ops): Likewise.
471 * ser-unix.c (hardwire_setparity): Add declaration.
472 (hardwire_raw): Don't reset PARENB flag.
473 (hardwire_setparity): New function.
474 (hardwire_ops): Add hardwire_setparity.
475 * serial.c (serial_setparity): New function.
476 (serial_parity): New global.
477 (parity_none, parity_odd, parity_even, parity_enums, parity):
479 (set_parity): New function.
480 (_initialize_serial): Add set/show serial parity commands.
481 * serial.h (GDBPARITY_NONE): Define.
482 (GDBPARITY_ODD): Define.
483 (GDBPARITY_EVEN): Define.
484 (serial_setparity) Add declaration.
485 (struct serial_ops): Add setparity field.
486 * target.h (serial_parity): Add declaration.
488 2015-03-23 Keith Seitz <keiths@redhat.com>
490 * linespec.c (linespec_lexer_lex_keyword): Update comment.
492 2015-03-23 Keith Seitz <keiths@redhat.com>
494 * breakpoint.c (parse_breakpoint_sals): Use
495 linespec_lexer_lex_keyword to ascertain if the user specified
497 * linespec.c [IF_KEYWORD_INDEX]: Define.
498 (linespec_lexer_lex_keyword): Export.
499 (struct ls_parser) <keyword_ok>: Remove.
500 A keyword is only a keyword if not followed by another keyword.
501 (linespec_lexer_lex_one): Remove keyword_ok handling.
502 Add comment explaining why the parsing stream is not advanced
503 when a keyword is seen.
504 (parse_linespec): Remove parser->keyword_ok.
505 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
507 2015-03-23 Keith Seitz <keiths@redhat.com>
510 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
511 if we find a static method with DW_AT_vtable_elem_location.
513 2015-03-21 Eli Zaretskii <eliz@gnu.org>
515 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
516 before the second loop, to avoid undefined behavior. Reported by
517 Anton Blanchard <anton@samba.org>.
519 2015-03-20 Keven Boell <keven.boell@intel.com>
521 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
522 data_location usage to linked list.
523 (resolve_dynamic_type_internal): Adapt data_location to
525 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
526 (copy_type_recursive, copy_type): Add copy of linked list.
527 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
528 (struct dynamic_prop_list): New struct.
529 * dwarf2read.c (set_die_type): Set data_location data.
531 2015-03-20 Pedro Alves <palves@redhat.com>
533 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
534 inner block and make it const.
535 * machoread.c (get_archive_prefix_len): Make "lparen" const.
537 2015-03-20 Pedro Alves <palves@redhat.com>
539 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
540 * breakpoint.h (set_breakpoint_condition): Update declaration.
542 2015-03-20 Pedro Alves <palves@redhat.com>
544 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
546 2015-03-20 Pedro Alves <palves@redhat.com>
548 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
550 2015-03-20 Pedro Alves <palves@redhat.com>
552 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
554 2015-03-20 Pedro Alves <palves@redhat.com>
556 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
557 (nto_init_solib_absolute_prefix): Likewise.
559 2015-03-20 Pedro Alves <palves@redhat.com>
561 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
562 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
564 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
566 * config/djgpp/README: Remove gdb.hp.
568 2015-03-20 Yao Qi <yao.qi@linaro.org>
570 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
571 set_gdbarch_cannot_step_breakpoint.
573 2015-03-19 Pedro Alves <palves@redhat.com>
575 * linux-nat.c (linux_resume_one_lwp): Rename to ...
576 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
577 instead call perror_with_name.
578 (check_ptrace_stopped_lwp_gone): New function.
579 (linux_resume_one_lwp): Reimplement as wrapper around
580 linux_resume_one_lwp_throw that swallows errors if the LWP is
582 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
583 swallows errors if the LWP is gone. Use
584 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
586 2015-03-19 Pedro Alves <palves@redhat.com>
588 * linux-nat.c (status_callback): Return early if the LWP has no
591 2015-03-19 Pedro Alves <palves@redhat.com>
593 * linux-nat.c (select_event_lwp_callback): Update comment to no
594 longer mention SIGTRAP.
596 2015-03-18 Tristan Gingold <gingold@adacore.com>
598 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
599 redirection code to ...
600 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
601 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
603 2015-03-18 Gary Benson <gbenson@redhat.com>
605 (remote_protocol_features): Remove the "vFile:fstat" feature.
606 (remote_hostio_fstat): Probe for "vFile:fstat" support.
608 2015-03-11 Yao Qi <yao.qi@linaro.org>
611 * aarch64-linux-tdep.c: Include xml-syscall.h
612 (aarch64_linux_get_syscall_number): New function.
613 (aarch64_linux_init_abi): Call
614 set_gdbarch_get_syscall_number.
615 * syscalls/aarch64-linux.xml: New file.
617 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
619 * ser-base.h (ser_base_setstopbits): Change second argument name
620 from "rate" to "num".
622 2015-03-17 Gary Benson <gbenson@redhat.com>
623 Luke Allardyce <lukeallardyce@gmail.com>
626 * common/common-remote-fileio.h (sys/stat.h): New include.
627 (stuct stat): Remove forward declaration.
629 2015-03-16 John Baldwin <jhb@FreeBSD.org>
631 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
632 before writing core register notes.
634 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
635 Pedro Alves <palves@redhat.com>
637 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
638 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
639 (tgoto): Wrap with extern "C".
641 2015-03-16 Pedro Alves <palves@redhat.com>
642 Yuanhui Zhang <asmwarrior@gmail.com>
644 * stub-termcap.c (tputs): Change prototype.
646 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
647 Pedro Alves <palves@redhat.com>
649 * windows-nat.c (struct thread_info_struct): Rename to ...
650 (struct windows_thread_info_struct): ... this.
651 (thread_info): Rename to ...
652 (windows_thread_info): ... this.
655 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
656 Pedro Alves <palves@redhat.com>
658 * NEWS: New Removed targets and native configurations.
660 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
663 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
664 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
665 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
666 ia64-hpux-tdep.h, solib-ia64-hpux.h.
667 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
668 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
669 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
671 * config/ia64/hpux.mh: Remove file.
672 * config/pa/hpux.mh: Remove file.
673 * configure: Rebuilt.
674 * configure.ac (dlgetmodinfo, somread.o): Remove.
675 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
676 (ia64-*-hpux*): Remove its float format exception.
677 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
678 * hppa-hpux-nat.c: Remove file.
679 * hppa-hpux-tdep.c: Remove file.
680 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
681 Move them here from hppa-tdep.h
682 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
683 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
684 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
685 Move them to hppa-tdep.c.
686 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
688 * ia64-hpux-nat.c: Remove file.
689 * ia64-hpux-tdep.c: Remove file.
690 * ia64-hpux-tdep.h: Remove file.
691 * inf-ttrace.c: Remove file.
692 * inf-ttrace.h: Remove file.
693 * solib-ia64-hpux.c: Remove file.
694 * solib-ia64-hpux.h: Remove file.
695 * solib-pa64.c: Remove file.
696 * solib-pa64.h: Remove file.
697 * solib-som.c: Remove file.
698 * solib-som.h: Remove file.
699 * somread.c: Remove file.
701 2015-03-13 John Baldwin <jhb@FreeBSD.org>
703 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
704 * config.in: Regenerate.
705 * configure: Regenerate.
706 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
708 (fbsd_find_memory_regions): Use kinfo_getvmmap to
709 enumerate memory regions if present.
711 2015-03-13 John Baldwin <jhb@FreeBSD.org>
713 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
714 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
716 (i386fbsd_sigtramp_p): Likewise.
718 2015-03-12 John Baldwin <jhb@FreeBSD.org>
720 * MAINTAINERS (Write After Approval): Add John Baldwin.
722 2015-03-12 Gary Benson <gbenson@redhat.com>
724 * solib.c (_initialize_solib): Make "set/show sysroot" use
725 add_setshow_optional_filename_cmd so it can be restored to
726 empty after being set.
728 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
730 * Makefile.in (SFILES): New source break-catch-syscall.c.
731 (COMMON_OBS): New object break-catch-syscall.o.
732 * break-catch-syscall.c: New file.
733 * breakpoint.c: Remove inclusion of "xml-syscall.h".
734 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
735 (struct syscall_catchpoint): Likewise.
736 (dtor_catch_syscall): Likewise.
737 (catch_syscall_inferior_data): Likewise.
738 (struct catch_syscall_inferior_data): Likewise.
739 (get_catch_syscall_inferior_data): Likewise.
740 (catch_syscall_inferior_data_cleanup): Likewise.
741 (insert_catch_syscall): Likewise.
742 (remove_catch_syscall): Likewise.
743 (breakpoint_hit_catch_syscall): Likewise.
744 (print_it_catch_syscall): Likewise.
745 (print_one_catch_syscall): Likewise.
746 (print_mention_catch_syscall): Likewise.
747 (print_recreate_catch_syscall): Likewise.
748 (catch_syscall_breakpoint_ops): Likewise.
749 (syscall_catchpoint_p): Likewise.
750 (create_syscall_event_catchpoint): Likewise.
751 (catch_syscall_split_args): Likewise.
752 (catch_syscall_command_1): Likewise.
753 (is_syscall_catchpoint_enabled): Likewise.
754 (catch_syscall_enabled): Likewise.
755 (catching_syscall_number): Likewise.
756 (catch_syscall_completer): Likewise.
757 (clear_syscall_counts): Likewise.
758 (initialize_breakpoint_ops): Move initialization of syscall
759 catchpoints to break-catch-syscall.c.
760 (_initialize_breakpoint): Move code related to syscall catchpoints
761 to break-catch-syscall.c.
763 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
765 * breakpoint.c (breakpoint_find_if): New function.
766 * breakpoint.h (breakpoint_find_if): New prototype.
768 2015-03-11 Gary Benson <gbenson@redhat.com>
770 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
771 * remote-fileio.c (remote_fileio_to_host_uint): New function.
772 (remote_fileio_to_host_ulong): Likewise.
773 (remote_fileio_to_host_mode): Likewise.
774 (remote_fileio_to_host_time): Likewise.
775 (remote_fileio_to_host_stat): Likewise.
776 * remote.c (PACKET_vFile_fstat): New enum value.
777 (remote_protocol_features): Register the "vFile:fstat" feature.
778 (remote_hostio_fstat): New function.
779 (remote_bfd_iovec_stat): Use the above.
780 (_initialize_remote): Register new "set/show remote
781 hostio-fstat-packet" command.
782 * symfile.c (separate_debug_file_exists): Update comment.
783 * NEWS: Announce new vFile:fstat packet.
785 2015-03-11 Gary Benson <gbenson@redhat.com>
787 * common/common-remote-fileio.h: New file.
788 * common/common-remote-fileio.c: Likewise.
789 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
790 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
791 (COMMON_OBS): Add common-remote-fileio.o.
792 (common-remote-fileio.o): New rule.
793 * remote-fileio.h (common-remote-fileio.h): New include.
794 * remote-fileio.c (gdb/fileio.h): Do not include.
795 (remote_fileio_to_be): Moved to common-remote-fileio.h.
796 (remote_fileio_to_fio_uint): Likewise.
797 (remote_fileio_to_fio_time): Likewise.
798 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
799 (remote_fileio_to_fio_mode): Likewise.
800 (remote_fileio_to_fio_ulong): Likewise.
801 (remote_fileio_to_fio_stat): Likewise.
803 2015-03-11 Andy Wingo <wingo@igalia.com>
805 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
806 we were checking the cached type, not the cached dynamic type.
808 2015-03-11 Andy Wingo <wingo@igalia.com>
810 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
811 other strings, as these are on the GC'd heap, and will be
812 collected along with the smob.
814 2015-03-11 Andy Wingo <wingo@igalia.com>
816 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
817 (objfile_functions): Bind gdbscm_objfile_progspace to
819 * guile/lib/gdb.scm: Add objfile-progspace to exports.
821 2015-03-11 Andy Wingo <wingo@igalia.com>
823 * guile/guile.c (_initialize_guile): Disable automatic
824 finalization, if Guile offers us that possibility.
825 * guile/guile.c (call_initialize_gdb_module):
826 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
827 finalizers in appropriate places.
828 * configure.ac (AC_TRY_LIBGUILE): Add a check for
829 scm_set_automatic_finalization_enabled.
830 * configure: Regenerated.
832 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
834 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
837 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
839 * s390-linux-nat.c (struct arch_lwp_info): New.
840 (s390_fix_watch_points): Rename to...
841 (s390_prepare_to_resume): ...this. Skip the PER info update
842 unless the watch points have changed.
843 (s390_refresh_per_info, s390_new_thread): New functions.
844 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
845 s390_fix_watch_points.
846 (s390_remove_watchpoint): Likewise.
847 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
848 Register s390_prepare_to_resume.
850 2015-03-09 Pedro Alves <palves@redhat.com>
853 2015-03-07 Pedro Alves <palves@redhat.com>
854 * common/gdb_socket.h: New file.
855 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
857 (net_open): Use union gdb_sockaddr_u.
859 2015-03-07 Pedro Alves <palves@redhat.com>
861 * configure.ac (build_warnings): Move -Wmissing-prototypes
862 -Wdeclaration-after-statement -Wmissing-parameter-type
863 -Wold-style-declaration -Wold-style-definition to the C-specific
865 * configure: Regenerate.
867 2015-03-07 Pedro Alves <palves@redhat.com>
869 * common/gdb_socket.h: New file.
870 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
872 (net_open): Use union gdb_sockaddr_u.
874 2015-03-07 Pedro Alves <palves@redhat.com>
876 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
877 (exceptions_state_mc_action_iter)
878 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
880 [__cplusplus] (try_scope_depth): New global.
881 [__cplusplus] (exception_try_scope_entry)
882 (exception_try_scope_exit, gdb_exception_sliced_copy)
883 (exception_rethrow): New functions.
884 (throw_exception): In C++ mode, throw
885 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
886 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
887 (throw_it): In C++ mode, use try_scope_depth.
888 * common/common-exceptions.h [!__cplusplus]
889 (exceptions_state_mc_action_iter)
890 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
892 [__cplusplus] (exception_try_scope_entry)
893 (exception_try_scope_exit, exception_rethrow): Declare.
894 [__cplusplus] (struct exception_try_scope): New struct.
895 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
897 (struct gdb_exception_RETURN_MASK_ALL)
898 (struct gdb_exception_RETURN_MASK_ERROR)
899 (struct gdb_exception_RETURN_MASK_QUIT): New types.
901 2015-03-07 Pedro Alves <palves@redhat.com>
903 * main.c (handle_command_errors): Remove volatile qualifier from
906 2015-03-07 Pedro Alves <palves@redhat.com>
908 * breakpoint.c (save_breakpoints): Adjust to avoid code between
910 * gdbtypes.c (safe_parse_type): Remove empty line.
911 (types_deeply_equal):
912 * guile/scm-frame.c (gdbscm_frame_name):
913 * linux-thread-db.c (find_new_threads_once):
914 * python/py-breakpoint.c (bppy_get_commands):
915 * record-btrace.c (record_btrace_insert_breakpoint)
916 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
917 (record_btrace_start_replaying): Adjust to avoid code between TRY
920 2015-03-07 Pedro Alves <palves@redhat.com>
922 * common/common-exceptions.c (struct catcher) <exception>: No
923 longer a pointer to volatile exception. Now an exception value.
924 <mask>: Delete field.
925 (exceptions_state_mc_init): Remove all parameters. Adjust.
926 (exceptions_state_mc): No longer pop the catcher here.
927 (exceptions_state_mc_catch): New function.
928 (throw_exception): Adjust.
929 * common/common-exceptions.h (exceptions_state_mc_init): Remove
931 (exceptions_state_mc_catch): Declare.
932 (TRY_CATCH): Rename to ...
933 (TRY): ... this. Remove EXCEPTION and MASK parameters.
934 (CATCH, END_CATCH): New.
935 All callers adjusted.
937 2015-03-07 Tom Tromey <tromey@redhat.com>
939 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
941 2015-03-07 Pedro Alves <palves@redhat.com>
943 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
944 (amd64_epilogue_frame_cache): Normal exception handling code.
945 * break-catch-throw.c (check_status_exception_catchpoint)
946 (re_set_exception_catchpoint): Ditto.
947 * cli/cli-interp.c (safe_execute_command):
948 * cli/cli-script.c (script_from_file): Ditto.
949 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
951 * compile/compile-object-run.c (compile_object_run): Ditto.
952 * cp-abi.c (baseclass_offset): Ditto.
953 * cp-valprint.c (cp_print_value): Ditto.
954 * exceptions.c (catch_exceptions_with_msg):
955 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
956 * frame.c (get_frame_address_in_block_if_available): Ditto.
957 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
958 (i386_sigtramp_frame_cache): Ditto.
959 * infcmd.c (post_create_inferior): Ditto.
960 * linespec.c (parse_linespec, find_linespec_symbols):
961 * p-valprint.c (pascal_object_print_value): Ditto.
962 * parse.c (parse_expression_for_completion): Ditto.
963 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
964 * remote.c (remote_get_noisy_reply): Ditto.
965 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
966 * solib-svr4.c (solib_svr4_r_map): Ditto.
968 2015-03-06 Gary Benson <gbenson@redhat.com>
970 * common/common-utils.h (startswith): New inline function.
971 All places where this logic was used updated to use the above.
973 2015-03-05 Pedro Alves <palves@redhat.com>
976 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
977 after reading the breakpoint's shadow memory.
979 2015-03-05 Mark Kettenis <kettenis@gnu.org>
981 * hppabsd-nat.c: Remove file.
982 * hppaobsd-nat.c: New file.
983 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
985 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
988 2015-03-04 Pedro Alves <palves@redhat.com>
990 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
991 (target_decr_pc_after_break): Delete declaration.
992 * target.c (default_target_decr_pc_after_break)
993 (target_decr_pc_after_break): Delete.
994 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
995 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
996 * linux-thread-db.c (check_event): Likewise.
997 * infrun.c (adjust_pc_after_break): Likewise.
998 * darwin-nat.c (cancel_breakpoint): Likewise.
999 * aix-thread.c (aix_thread_wait): Likewise.
1000 * target-delegates.c: Regenerate.
1002 2015-03-04 Pedro Alves <palves@redhat.com>
1004 * linux-nat.c (save_sigtrap): Check for breakpoints before
1005 checking watchpoints.
1006 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
1007 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
1008 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
1009 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
1010 (linux_nat_stopped_by_sw_breakpoint)
1011 (linux_nat_supports_stopped_by_sw_breakpoint)
1012 (linux_nat_stopped_by_hw_breakpoint)
1013 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
1014 (linux_nat_wait_1): Don't re-increment the PC if relying on
1015 SIGTRAP's siginfo->si_code.
1016 (linux_nat_add_target): Install new target methods.
1017 * linux-thread-db.c (check_event): Don't account for breakpoint PC
1018 offset if the target already adjusted the PC.
1019 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
1020 (GDB_ARCH_TRAP_BRKPT): New.
1021 (TRAP_HWBKPT): Define if not already defined.
1023 2015-03-04 Pedro Alves <palves@redhat.com>
1025 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
1026 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
1028 <stop_reason>: New field.
1029 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
1030 (packet_set_cmd_state): New function.
1031 (remote_protocol_features): Register the "swbreak" and "hwbreak"
1033 (remote_query_supported): If not disabled with the corresponding
1034 "set remote foo-packet" command, report support for the swbreak
1035 and hwbreak features.
1036 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
1038 <stop_reason>: New field.
1039 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
1040 (remote_wait_as): Adjust.
1041 (remote_stopped_by_sw_breakpoint)
1042 (remote_supports_stopped_by_sw_breakpoint)
1043 (remote_stopped_by_hw_breakpoint)
1044 (remote_supports_stopped_by_hw_breakpoint): New functions.
1045 (remote_stopped_by_watchpoint): New function.
1046 (init_remote_ops): Install them.
1047 (_initialize_remote): Register new "set/show remote
1048 swbreak-feature-packet" and "set/show remote
1049 swbreak-feature-packet" commands.
1051 2015-03-04 Pedro Alves <palves@redhat.com>
1053 * btrace.h: Include target/waitstatus.h.
1054 (struct btrace_thread_info) <stop_reason>: New field.
1055 * record-btrace.c (record_btrace_step_thread): Use
1056 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
1057 (record_btrace_decr_pc_after_break): Delete.
1058 (record_btrace_stopped_by_sw_breakpoint)
1059 (record_btrace_supports_stopped_by_sw_breakpoint)
1060 (record_btrace_stopped_by_hw_breakpoint)
1061 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
1062 (init_record_btrace_ops): Install them.
1063 * record-full.c (record_full_hw_watchpoint): Delete and replace
1065 (record_full_stop_reason): ... this throughout.
1066 (record_full_exec_insn): Adjust.
1067 (record_full_wait_1): Adjust. No longer re-increment the PC.
1068 (record_full_wait_1): Adjust. Use
1069 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
1070 (record_full_stopped_by_watchpoint): Adjust.
1071 (record_full_stopped_by_sw_breakpoint)
1072 (record_full_supports_stopped_by_sw_breakpoint)
1073 (record_full_supports_stopped_by_sw_breakpoint)
1074 (record_full_stopped_by_hw_breakpoint)
1075 (record_full_supports_stopped_by_hw_breakpoint): New functions.
1076 (init_record_full_ops, init_record_full_core_ops): Install them.
1077 * record.c (record_check_stopped_by_breakpoint): New function.
1078 * record.h: Include target/waitstatus.h.
1079 (record_check_stopped_by_breakpoint): New declaration.
1081 2015-03-04 Pedro Alves <palves@redhat.com>
1083 enum lwp_stop_reason -> enum target_stop_reason
1084 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
1085 (linux_nat_stopped_by_watchpoint, status_callback)
1086 (linux_nat_wait_1): Adjust.
1087 * linux-nat.h (enum lwp_stop_reason): Delete.
1088 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
1089 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
1090 * target/waitstatus.h (enum target_stop_reason): New.
1092 2015-03-04 Pedro Alves <palves@redhat.com>
1094 * breakpoint.c (need_moribund_for_location_type): New function.
1095 (bpstat_stop_status): Don't skipping checking moribund locations
1096 of breakpoint types which the target tell caused a stop.
1097 (program_breakpoint_here_p): New function, factored out from ...
1098 (bp_loc_is_permanent): ... this.
1099 (update_global_location_list): Don't create a moribund location if
1100 the target supports reporting stops of the type of the removed
1102 * breakpoint.h (program_breakpoint_here_p): New declaration.
1103 * infrun.c (adjust_pc_after_break): Return early if the target has
1104 already adjusted the PC. Add comments.
1105 (handle_signal_stop): If nothing explains a signal, and the target
1106 tells us the stop was caused by a software breakpoint, check if
1107 there's a breakpoint instruction in the memory. If so, adjust the
1108 PC before presenting the stop to the user. Otherwise, ignore the
1109 trap. If nothing explains a signal, and the target tells us the
1110 stop was caused by a hardware breakpoint, ignore the trap.
1111 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
1112 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
1113 to_supports_stopped_by_hw_breakpoint>: New fields.
1114 (target_stopped_by_sw_breakpoint)
1115 (target_supports_stopped_by_sw_breakpoint)
1116 (target_stopped_by_hw_breakpoint)
1117 (target_supports_stopped_by_hw_breakpoint): Define.
1118 * target-delegates.c: Regenerate.
1120 2015-03-04 Pedro Alves <palves@redhat.com>
1122 * infrun.c (follow_fork_inferior): Use the whole of the
1123 inferior_ptid and pending_follow.related_pid ptids instead of
1124 building ptids from the process components. Adjust verbose output
1125 to use target_pid_to_str.
1126 * linux-nat.c (linux_child_follow_fork): Use the whole of the
1127 inferior_ptid and pending_follow.related_pid ptids instead of
1128 building ptids from the process components.
1130 2015-03-04 Mark Kettenis <kettenis@gnu.org>
1132 * inf-ptrace.c [PT_GET_PROCESS_STATE]
1133 (inf_ptrace_insert_fork_catchpoint): New function.
1134 (inf_ptrace_remove_fork_catchpoint): New function.
1135 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
1137 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
1139 * s390-linux-tdep.c (s390_register_name): Return empty string
1140 instead of NULL for registers that shouldn't be visible.
1142 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
1144 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
1145 XML file for 64-bit targets.
1147 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
1149 * target.h (find_default_create_inferior): Remove declaration.
1150 (find_default_attach): Likewise.
1152 2015-03-03 Pedro Alves <palves@redhat.com>
1154 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
1155 Use ptid_get_pid to get the overall process id when resuming all
1158 2015-03-03 Pedro Alves <palves@redhat.com>
1160 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
1161 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
1162 * inf-ptrace.c (get_ptrace_pid): New function.
1163 (inf_ptrace_resume): Use it.
1164 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
1167 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
1169 * nat/linux-btrace.c: Include sys/utsname.h.
1170 (linux_determine_kernel_ptr_bits): New.
1171 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
1172 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
1175 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
1177 * btrace.c (ftrace_update_function): Treat return as tailcall for
1178 "_dl_runtime_resolve".
1180 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
1182 * btrace.h (btrace_function) <lbegin, lend>: Remove.
1183 * btrace.c (ftrace_debug): Do not print the line range.
1184 (ftrace_skip_file, ftrace_update_lines): Remove.
1185 (ftrace_new_function): Remove lbegin and lend initialization.
1186 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
1187 * record-btrace.c (btrace_compute_src_line_range): New.
1188 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
1190 2015-03-02 Pedro Alves <palves@redhat.com>
1192 * infrun.c (follow_exec): Delete all threads of the process except
1193 the event thread. Extended comments.
1195 2015-03-02 Joel Brobecker <brobecker@adacore.com>
1197 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
1199 2015-03-02 Joel Brobecker <brobecker@adacore.com>
1201 * utils.h: Remove <stdbool.h> #include.
1202 (producer_is_gcc): Change return type to "int".
1203 * utils.c (producer_is_gcc): Change return type to int.
1204 Return 1 instead of true, and 0 instead of false.
1205 Adjust function documentation accordingly.
1207 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
1209 * s390-linux-nat.c (have_regset_vxrs): New static variable.
1210 (s390_linux_fetch_inferior_registers): Handle vector registers, if
1212 (s390_linux_store_inferior_registers): Likewise.
1213 (s390_get_hwcap): Remove function. Embed its logic...
1214 (s390_read_description): ...here. Yield a target description with
1215 vector registers if applicable.
1216 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
1217 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
1218 "features/s390x-tevx-linux64.c".
1219 (struct gdbarch_tdep) <v0_full_regnum>: New field.
1220 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
1221 for "GNU/Linux-specific registers".
1222 (s390_dwarf_reg_r0l): New enum value.
1223 (s390_dwarf_reg_to_regnum): Support vector registers.
1224 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
1225 of GPR lower halves.
1226 (regnum_is_vxr_full): New function.
1227 (s390_register_name): New function.
1228 (s390_pseudo_register_name): Handle v0-v15, which are composed of
1229 f0-f15 and v0l-v15l.
1230 (s390_pseudo_register_type): Likewise.
1231 (s390_pseudo_register_read): Likewise.
1232 (s390_pseudo_register_write): Likewise.
1233 (s390_value_from_register): Account for the fact that values are
1234 placed left-justified in vector registers.
1235 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
1236 the vector reggroup and omit them from the general reggroup.
1237 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
1238 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
1239 (s390_iterate_over_regset_sections): Add iterations for the two
1241 (s390_core_read_description): Yield a target description with
1242 vector registers if applicable.
1243 (s390_gdbarch_init): Handle target descriptions with vector
1244 registers. Add "register_name" gdbarch method.
1245 (_initialize_s390_tdep): Call new tdesc initialization functions.
1246 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
1247 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
1248 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
1249 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
1250 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
1251 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
1252 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
1253 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
1254 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
1255 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
1256 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
1257 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
1258 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
1259 (S390_NUM_REGS): Adjust value.
1260 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
1261 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
1262 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
1263 * NEWS: Announce S/390 vector register support.
1265 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
1267 * features/s390-tevx-linux64.xml: New file.
1268 * features/s390-vx-linux64.xml: New file.
1269 * features/s390-vx.xml: New file.
1270 * features/s390x-tevx-linux64.xml: New file.
1271 * features/s390x-vx-linux64.xml: New file.
1272 * features/Makefile (WHICH): Add s390-vx-linux64,
1273 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
1274 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
1275 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
1277 * features/s390-tevx-linux64.c: New generated file.
1278 * features/s390-vx-linux64.c: Likewise.
1279 * features/s390x-tevx-linux64.c: Likewise.
1280 * features/s390x-vx-linux64.c: Likewise.
1281 * regformats/s390-tevx-linux64.dat: Likewise.
1282 * regformats/s390-vx-linux64.dat: Likewise.
1283 * regformats/s390x-tevx-linux64.dat: Likewise.
1284 * regformats/s390x-vx-linux64.dat: Likewise.
1286 2015-02-28 Doug Evans <xdje42@gmail.com>
1288 * symtab.h (struct symtab) <next>: Fix comment.
1290 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
1292 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
1295 2015-02-27 Pedro Alves <palves@redhat.com>
1297 * dtrace-probe.c (dtrace_probe_ops): Make extern.
1299 2015-02-27 Pedro Alves <palves@redhat.com>
1301 * common/common-exceptions.h (exception_none): Declare.
1302 * common/common-exceptions.c (exception_none): Moved from
1304 (exceptions_state_mc_init): Use exception_none.
1305 * exceptions.c (exception_none): Move to
1306 common/common-exceptions.c.
1307 * exceptions.h (exception_none): Move to
1308 common/common-exceptions.h.
1310 2015-02-27 Pedro Alves <palves@redhat.com>
1312 * main.c (catch_command_errors, catch_command_errors_const):
1313 Remove 'mask' argument. Adjust.
1314 (captured_main): Adjust callers.
1316 2015-02-27 Pedro Alves <palves@redhat.com>
1318 * python/python-internal.h: Include "extension-priv.h".
1320 2015-02-27 Pedro Alves <palves@redhat.com>
1322 * breakpoint.h (enum print_stop_action): Move further up in the
1325 2015-02-27 Pedro Alves <palves@redhat.com>
1327 * gdbarch.sh: Include regcache.h.
1328 * gdbarch.h: Regenerate.
1330 2015-02-27 Pedro Alves <palves@redhat.com>
1332 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
1333 Remove duplicate const.
1334 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
1337 2015-02-27 Pedro Alves <palves@redhat.com>
1339 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
1340 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
1341 * features/feature_to_c.sh: Tag the generated xml_builtin array
1342 with extern const in C++ mode.
1344 2015-02-27 Tom Tromey <tromey@redhat.com>
1346 * minidebug.c (struct lzma_stream): Rename to ...
1347 (struct gdb_lzma_stream): ... this.
1348 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
1350 2015-02-27 Pedro Alves <palves@redhat.com>
1352 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
1354 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
1355 (mi_cmd_stack_list_variables): Use it.
1357 2015-02-27 Pedro Alves <palves@redhat.com>
1359 * x86-linux-nat.c (u_debugreg_offset): New function.
1360 (x86_linux_dr_get, x86_linux_dr_set): Use it.
1362 2015-02-27 Pedro Alves <palves@redhat.com>
1364 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
1366 Include break-common.h.
1368 2015-02-27 Tom Tromey <tromey@redhat.com>
1369 Pedro Alves <palves@redhat.com>
1371 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
1372 local used to iterate over enums.
1373 * completer.c (signal_completer): Likewise.
1374 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
1375 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
1376 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
1377 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
1378 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
1379 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
1380 * tui-wingeneral.c (tui_refresh_all): Likewise.
1382 2015-02-27 Pedro Alves <palves@redhat.com>
1384 * target.h: Include "infrun.h".
1386 2015-02-27 Pedro Alves <palves@redhat.com>
1388 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
1390 2015-02-27 Pedro Alves <palves@redhat.com>
1392 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
1394 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
1396 2015-02-27 Pedro Alves <palves@redhat.com>
1398 * cli-out.c (_rl_erase_entire_line): Move declaration out of
1399 cli_mld_erase_entire_line, and make it extern "C".
1400 * common/common-defs.h (EXTERN_C): New.
1401 * completer.c (_rl_completion_prefix_display_length)
1402 (_rl_print_completions_horizontally, QSFUNC): Move declarations
1403 out of gdb_display_match_list_1.
1404 (_rl_qsort_string_compare): Move declaration out of
1405 gdb_display_match_list_1, and make it extern "C".
1406 * defs.h (re_comp): Use EXTERN_C.
1407 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
1408 and make it extern "C".
1409 (monstartup): Move declaration out of maintenance_set_profile_cmd,
1410 and make it extern "C".
1411 (main): Move declaration out of maintenance_set_profile_cmd.
1412 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
1415 2015-02-27 Pedro Alves <palves@redhat.com>
1417 * python/python.c (GdbMethods): Rename to ...
1418 (python_GdbMethods): ... this and make extern.
1419 (GdbModuleDef): Rename to ...
1420 (python_GdbModuleDef): ... this and make extern.
1422 2015-02-27 Pedro Alves <palves@redhat.com>
1424 * record-btrace.c (set_record_btrace_cmdlist)
1425 (show_record_btrace_cmdlist): Remove redefinitions.
1427 2015-02-27 Tom Tromey <tromey@redhat.com>
1428 Pedro Alves <palves@redhat.com>
1430 * dwarf2-frame.c (enum cfa_how_kind, struct
1431 dwarf2_frame_state_reg_info): Move out of struct
1433 * dwarf2read.c (struct tu_stats): Move out of struct
1435 (struct file_entry): Move out of struct line_header.
1436 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
1437 typedef_field_list): Move out of struct field_info.
1438 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
1439 Move out of struct dynamic_prop.
1440 (union type_owner, union field_location, struct field, struct
1441 range_bounds, union type_specific): Move out of struct main_type.
1442 (struct fn_fieldlist, struct fn_field, struct typedef_field)
1443 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
1444 (struct call_site_target, union call_site_parameter_u, struct
1445 call_site_parameter): Move out of struct call_site.
1446 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
1448 (enum srcdest_kind): Move out of struct srcdest.
1449 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
1450 * prologue-value.h (enum prologue_value_kind): Move out of struct
1452 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
1454 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
1455 out of struct field_info.
1456 * symfile.h (struct other_sections): Move out of struct
1458 * symtab.c (struct symbol_cache_slot): Move out struct
1460 * target-descriptions.c (enum tdesc_type_kind): Move out of
1461 typedef struct tdesc_type.
1462 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
1463 struct tui_line_or_address.
1464 * value.c (enum internalvar_kind, union internalvar_data): Move
1465 out of struct internalvar.
1466 * xtensa-tdep.h (struct ctype_cache): Move out of struct
1469 2015-02-27 Tom Tromey <tromey@redhat.com>
1470 Pedro Alves <palves@redhat.com>
1472 Rename symbols whose names are reserved C++ keywords throughout.
1474 2015-02-27 Pedro Alves <palves@redhat.com>
1476 * Makefile.in (COMPILER): New, get it from autoconf.
1477 (COMPILE.pre, CC_LD): Use COMPILER.
1478 (CXX): Get from autoconf instead.
1479 (CXX_FOR_TARGET): Default to g++ instead of gcc.
1480 * acinclude.m4: Include build-with-cxx.m4.
1481 * build-with-cxx.m4: New file.
1482 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
1483 Disable -Werror by default if building in C++ mode.
1484 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
1485 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
1486 Run supported-warning-flags tests with the C++ compiler.
1487 Save/restore CXXFLAGS too.
1488 * configure: Regenerate.
1490 2015-02-27 Pedro Alves <palves@redhat.com>
1492 * libiberty.m4: New file.
1493 * acinclude.m4: Include libiberty.m4.
1494 * configure.ac: Call libiberty_INIT.
1495 * config.in, configure: Regenerate.
1497 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1499 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
1500 31-bit targets, but 64-bit targets as well.
1501 (s390_gnu_triplet_regexp): New function.
1502 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
1503 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
1506 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
1508 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
1509 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
1510 from CONTEXT_DEBUGGER.
1512 2015-02-26 Doug Evans <dje@google.com>
1514 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
1516 (set_type_vptr_fieldno): Ditto.
1517 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
1518 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
1520 2015-02-26 Pedro Alves <palves@redhat.com>
1522 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
1523 * complaints.c (vcomplaint): Pass argument FMT directly to
1524 printf-like functions instead of complaint->fmt.
1525 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
1526 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
1527 * compile/compile-loc2c.c (pushf, unary, binary): Add
1529 (do_compile_dwarf_expr_to_c): Pass string literal as format string
1531 (BINARY): Pass string literal as format string to 'binary'.
1532 * compile/compile-object-load.c (link_callbacks_einfo): Add
1534 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
1536 2015-02-26 Pedro Alves <palves@redhat.com>
1538 * windows-termcap.c: Rename to ...
1539 * stub-termcap.c: ... this. Adjust header line.
1540 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
1542 * configure: Regenerate.
1543 * configure.ac: Refer to stub-termcap.o instead of
1545 * gdb_curses.h: Mention stub-termcap.c instead of
1548 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1550 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
1551 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
1553 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
1555 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
1557 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1559 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
1560 bfd_canonicalize_symtab.
1562 2015-02-25 John Baldwin <jhb@FreeBSD.org>
1564 * amd64fbsd-nat.c: Include sys/user.h.
1565 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
1566 instead of KERN_PS_STRINGS to locate the signal trampoline.
1567 * i386fbsd-nat.c: Include sys/user.h.
1568 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
1569 instead of KERN_PS_STRINGS to locate the signal trampoline.
1570 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
1571 (amd64fbsd_sigtramp_p): New.
1572 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
1573 longer set default values.
1574 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
1575 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
1576 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
1577 (i386fbsd_freebsd4_sigtramp_start)
1578 (i386fbsd_freebsd4_sigtramp_middle)
1579 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
1580 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
1581 (i386fbsd_sigtramp_p): New.
1582 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
1583 longer set default values.
1584 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
1586 2015-02-25 John Baldwin <jhb@freebsd.org>
1588 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
1589 get_frame_register instead of frame_unwind_register_unsigned.
1591 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1594 * compile/compile-c-support.c (c_compute_program): Change // comment.
1595 * compile/compile-object-load.c (setup_sections): Change // comment.
1597 2015-02-26 Joel Brobecker <brobecker@adacore.com>
1600 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
1602 2015-02-23 Pedro Alves <palves@redhat.com>
1604 * remote.c (skip_to_semicolon): New function.
1605 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
1606 special case the stop reasons that look like hex numbers
1607 upfront. Instead handle real register numbers after matching
1608 all the known stop reasons.
1610 2015-02-21 Doug Evans <dje@google.com>
1612 PR c++/17976, symtab/17821
1613 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
1614 is_in_anonymous. All callers updated.
1615 (find_symbol_in_baseclass): Ditto.
1616 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
1617 for symbols in an anonymous namespace.
1618 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
1619 DW_AT_name directly.
1620 (dwarf2_name): Convert missing namespace name to
1621 CP_ANONYMOUS_NAMESPACE_STR.
1623 2015-02-20 Pedro Alves <palves@redhat.com>
1625 * linux-nat.c (linux_handle_extended_wait): Call
1626 thread_db_notice_clone whenever a new clone LWP is detected.
1627 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
1629 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
1630 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
1631 (linux_unstop_all_lwps): Declare.
1632 * linux-thread-db.c (struct thread_get_info_inout): Delete.
1633 (thread_get_info_callback): Delete.
1634 (thread_from_lwp): Use td_thr_get_info and record_thread.
1635 (thread_db_attach_lwp): Delete.
1636 (thread_db_notice_clone): New function.
1637 (try_thread_db_load_1): If /proc is mounted and shows the
1638 process'es task list, walk over all LWPs and call thread_from_lwp
1639 instead of relying on td_ta_thr_iter.
1640 (attach_thread): Don't call check_thread_signals here. Split the
1641 tail part of the function (which adds the thread to the core GDB
1643 (record_thread): ... this function. Call check_thread_signals
1645 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
1646 call thread_from_lwp.
1647 (thread_db_update_thread_list): Rename to ...
1648 (thread_db_update_thread_list_org): ... this.
1649 (thread_db_update_thread_list): New function.
1650 (thread_db_find_thread_from_tid): Delete.
1651 (thread_db_get_ada_task_ptid): Simplify.
1652 * nat/linux-procfs.c: Include <sys/stat.h>.
1653 (linux_proc_task_list_dir_exists): New function.
1654 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
1656 2015-02-20 Pedro Alves <palves@redhat.com>
1658 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
1659 main LWP. Handle the case of waitpid returning 0 if we're already
1660 attached to the LWP. Don't set the LWP's last_resume_kind to
1661 resume_stop if we already knew about the LWP.
1662 (linux_nat_filter_event): Add debug logs.
1664 2015-02-20 Pedro Alves <palves@redhat.com>
1666 * target.h (forward_target_decr_pc_after_break): Delete
1669 2015-02-20 Pedro Alves <palves@redhat.com>
1672 * linux-thread-db.c (thread_get_info_callback): Return early if
1673 the thread's lwp id is -1.
1675 2015-02-20 Joel Brobecker <brobecker@adacore.com>
1679 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
1681 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
1682 (dtrace_get_probes) Change type of variable 'dof'.
1684 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
1686 PR breakpoints/16812
1687 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
1688 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
1689 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
1691 2015-02-19 David Taylor <dtaylor@emc.com>
1693 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
1695 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
1697 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
1699 (tui_putc): Don't call tui_handle_resize_during_io.
1700 (tui_getc): Likewise.
1701 (tui_mld_getc): Likewise.
1702 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
1703 (tui_sigwinch_token): New static variable.
1704 (tui_initialize_win): Adjust documentation. Set
1706 (tui_async_resize_screen): New asynchronous callback.
1707 (tui_sigwinch_handler): Adjust documentation. Asynchronously
1708 invoke tui_async_resize_screen.
1710 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
1712 * configure: Regenerated.
1713 * configure.ac: Use GDB_AC_TRANSFORM.
1714 * Makefile.in (aclocal_m4_deps): Added transform.m4.
1715 * acinclude.m4: sinclude transform.m4.
1716 * transform.m4: New file.
1717 (GDB_AC_TRANSFORM): New macro.
1719 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1721 * NEWS: Announce the support for DTrace SDT probes.
1723 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1725 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
1726 (amd64_dtrace_parse_probe_argument): New function.
1727 (amd64_dtrace_probe_is_enabled): Likewise.
1728 (amd64_dtrace_enable_probe): Likewise.
1729 (amd64_dtrace_disable_probe): Likewise.
1730 (amd64_linux_init_abi): Register the
1731 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
1732 `gdbarch_dtrace_disable_probe' and
1733 `gdbarch_dtrace_probe_is_enabled' hooks.
1734 (amd64_dtrace_disabled_probe_sequence_1): New constant.
1735 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
1736 (amd64_dtrace_enable_probe_sequence): Likewise.
1737 (amd64_dtrace_disable_probe_sequence): Likewise.
1739 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1741 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
1742 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
1743 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
1745 * Makefile.in (SFILES): dtrace-probe.c added.
1746 * configure: Regenerate.
1747 * dtrace-probe.c: New file.
1748 (SHT_SUNW_dof): New constant.
1749 (dtrace_probe_type): New enum.
1750 (dtrace_probe_arg): New struct.
1751 (dtrace_probe_arg_s): New typedef.
1752 (struct dtrace_probe_enabler): New struct.
1753 (dtrace_probe_enabler_s): New typedef.
1754 (dtrace_probe): New struct.
1755 (dtrace_probe_is_linespec): New function.
1756 (dtrace_dof_sect_type): New enum.
1757 (dtrace_dof_dofh_ident): Likewise.
1758 (dtrace_dof_encoding): Likewise.
1759 (DTRACE_DOF_ENCODE_LSB): Likewise.
1760 (DTRACE_DOF_ENCODE_MSB): Likewise.
1761 (dtrace_dof_hdr): New struct.
1762 (dtrace_dof_sect): Likewise.
1763 (dtrace_dof_provider): Likewise.
1764 (dtrace_dof_probe): Likewise.
1765 (DOF_UINT): New macro.
1766 (DTRACE_DOF_PTR): Likewise.
1767 (DTRACE_DOF_SECT): Likewise.
1768 (dtrace_process_dof_probe): New function.
1769 (dtrace_process_dof): Likewise.
1770 (dtrace_build_arg_exprs): Likewise.
1771 (dtrace_get_arg): Likewise.
1772 (dtrace_get_probes): Likewise.
1773 (dtrace_get_probe_argument_count): Likewise.
1774 (dtrace_can_evaluate_probe_arguments): Likewise.
1775 (dtrace_evaluate_probe_argument): Likewise.
1776 (dtrace_compile_to_ax): Likewise.
1777 (dtrace_probe_destroy): Likewise.
1778 (dtrace_gen_info_probes_table_header): Likewise.
1779 (dtrace_gen_info_probes_table_values): Likewise.
1780 (dtrace_probe_is_enabled): Likewise.
1781 (dtrace_probe_ops): New variable.
1782 (info_probes_dtrace_command): New function.
1783 (_initialize_dtrace_probe): Likewise.
1784 (dtrace_type_name): Likewise.
1786 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1788 * gdbarch.sh (dtrace_parse_probe_argument): New.
1789 (dtrace_probe_is_enabled): Likewise.
1790 (dtrace_enable_probe): Likewise.
1791 (dtrace_disable_probe): Likewise.
1792 * gdbarch.c: Regenerate.
1793 * gdbarch.h: Regenerate.
1795 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1797 * stap-probe.c (stap_probe_ops): Add NULLs in the static
1798 stap_probe_ops for `enable_probe' and `disable_probe'.
1799 * probe.c (enable_probes_command): New function.
1800 (disable_probes_command): Likewise.
1801 (_initialize_probe): Define the cli commands `enable probe' and
1803 (parse_probe_linespec): New function.
1804 (info_probes_for_ops): Use parse_probe_linespec.
1805 * probe.h (probe_ops): New hooks `enable_probe' and
1808 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1810 * probe.c (compute_probe_arg): Moved from stap-probe.c
1811 (compile_probe_arg): Likewise.
1812 (probe_funcs): Likewise.
1813 * stap-probe.c (compute_probe_arg): Moved to probe.c.
1814 (compile_probe_arg): Likewise.
1815 (probe_funcs): Likewise.
1817 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1819 * probe.c (print_ui_out_not_applicables): New function.
1820 (exists_probe_with_pops): Likewise.
1821 (info_probes_for_ops): Do not include column headers for probe
1822 types for which no probe has been actually found on any object.
1823 Also invoke `print_ui_out_not_applicables' in order to match the
1824 column rows with the header when probes of several types are
1826 Print the "Type" column.
1827 * probe.h (probe_ops): Added a new probe operation `type_name'.
1828 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
1829 (stap_type_name): New function.
1831 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
1833 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
1834 (key_is_command_char): Delete.
1836 2015-02-17 Pedro Alves <palves@redhat.com>
1838 * tui/tui.c (tui_enable): Resize windows before anything
1839 might show a window.
1841 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
1844 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
1845 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
1847 * aarch64-tdep.h (tdesc_aarch64): Declare.
1849 2015-02-12 Mark Wielaard <mjw@redhat.com>
1851 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
1853 2015-02-13 Doug Evans <dje@google.com>
1855 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
1856 anonymous_namespace to is_in_anonymous for consistency with the rest
1858 (cp_lookup_bare_symbol): Fix typo in comment.
1859 (cp_search_static_and_baseclasses): Ditto.
1860 (search_symbol_list): Use vertical space in comment better.
1861 (reset_directive_searched): Ditto. Fix typo.
1862 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
1864 2015-02-13 Yao Qi <yao.qi@arm.com>
1866 * MAINTAINERS: Update my email address.
1868 2015-02-12 Doug Evans <dje@google.com>
1870 * symtab.c (completion_list_add_name): Fix memory leak.
1872 2015-02-12 Doug Evans <dje@google.com>
1874 * completer.c (complete_line): Remove incorrect comment.
1876 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1878 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
1879 (py_print_frame): Use RETURN_MASK_ERROR.
1881 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1883 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
1884 function comment. Wrap all function that can throw in cleanups.
1885 (gdbpy_apply_frame_filter): Wrap all function that can throw in
1888 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1890 * python/py-framefilter.c (py_print_frame): Substitute goto error.
1891 Remove the error label.
1893 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1895 * python/py-framefilter.c (py_print_frame): Put conditional code paths
1896 with goto first, indent the former else codepath left. Put variable
1897 'elided' to a new inner block.
1899 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1901 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
1903 2015-02-11 Pedro Alves <palves@redhat.com>
1905 * xcoffread.c (within_function): Delete.
1907 2015-02-11 Tom Tromey <tromey@redhat.com>
1908 Pedro Alves <palves@redhat.com>
1910 * breakpoint.c (base_breakpoint_ops): Delete.
1911 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
1912 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
1913 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
1914 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
1915 * python/py-arch.c (arch_object_type): Make extern.
1916 * python/py-block.c (block_syms_iterator_object_type): Make extern.
1917 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
1918 * python/py-cmd.c (cmdpy_object_type): Make extern.
1919 * python/py-continueevent.c (continue_event_object_type)
1920 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
1921 parameter. Update all callers.
1922 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
1923 * python/py-exitedevent.c (exited_event_object_type): Make extern.
1924 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
1925 * python/py-function.c (fnpy_object_type): Make extern.
1926 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
1927 * python/py-infevents.c (call_pre_event_object_type)
1928 (inferior_call_post_event_object_type).
1929 (memory_changed_event_object_type): Make extern.
1930 * python/py-infthread.c (thread_object_type): Make extern.
1931 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
1932 * python/py-linetable.c (linetable_entry_object_type)
1933 (linetable_object_type, ltpy_iterator_object_type): Make extern.
1934 * python/py-newobjfileevent.c (new_objfile_event_object_type)
1935 (clear_objfiles_event_object_type): Make extern.
1936 * python/py-objfile.c (objfile_object_type): Make extern.
1937 * python/py-param.c (parmpy_object_type): Make extern.
1938 * python/py-progspace.c (pspace_object_type): Make extern.
1939 * python/py-signalevent.c (signal_event_object_type): Make extern.
1940 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
1941 * python/py-type.c (type_object_type, field_object_type)
1942 (type_iterator_object_type): Make extern.
1943 * python/python.c (python_extension_script_ops)
1944 (python_extension_ops): Make extern.
1945 * stap-probe.c (stap_probe_ops): Make extern.
1947 2015-02-11 Pedro Alves <pedro@codesourcery.com>
1949 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
1950 because the event thread is not the current thread.
1952 2015-02-11 Doug Evans <xdje42@gmail.com>
1954 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
1955 been initialized yet, return NULL.
1957 2015-02-11 Doug Evans <dje@google.com>
1959 * symfile.h (new_symfile_objfile): Delete.
1960 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
1961 All callers updated.
1963 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
1965 * tui/tui-io.c (tui_handle_resize_during_io): Call
1966 tui_update_gdb_sizes() after resizing the screen.
1967 * tui/tui.c (tui_enable): Resize the terminal before
1968 calling tui_update_gdb_sizes().
1970 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
1972 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
1973 line before printing a newline.
1975 2015-02-11 Mark Wielaard <mjw@redhat.com>
1977 * utils.c (producer_is_gcc): Return true or false.
1979 2015-02-10 Mark Wielaard <mjw@redhat.com>
1981 * utils.h (producer_is_gcc): Change return type to bool. Add major
1983 * utils.c (producer_is_gcc): Likewise.
1984 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
1985 * dwarf2read.c (check_producer): Likewise.
1987 2015-02-10 Pedro Alves <palves@redhat.com>
1989 * infrun.c (displaced_step_fixup): Switch to the event thread
1990 before calling gdbarch_displaced_step_fixup.
1992 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
1994 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
1996 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
1998 * ada-varobj.c (ada_name_of_child): Constify parent.
1999 (ada_path_expr_of_child): Same.
2000 (ada_value_of_child): Same.
2001 (ada_type_of_child): Same.
2002 * c-varobj.c (c_is_path_expr_parent): Same.
2003 (c_describe_child): Same.
2004 (c_name_of_child): Same.
2005 (c_value_of_child): Same.
2006 (c_type_of_child): Same.
2007 (cplus_number_of_children): Same.
2008 (cplus_describe_child): Constify var.
2009 (cplus_name_of_child): Constify parent.
2010 (cplus_value_of_child): Same.
2011 (cplus_type_of_child): Same.
2012 * jv-varobj.c (java_name_of_child): Same.
2013 (java_value_of_child): Same.
2014 (java_type_of_child): Same.
2015 * varobj.c (value_of_child): Same.
2016 (varobj_default_is_path_expr_parent): Constify var, parent and return
2018 (varobj_get_path_expr): Constify var, modify path_expr through
2020 (install_new_value): Constify parent.
2021 (value_of_child): Constify parent.
2022 * varobj.h (struct varobj): Constify parent.
2023 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
2025 (varobj_get_path_expr): Constify var.
2026 (varobj_get_path_expr_parent): Constify var and return value.
2028 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
2030 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
2031 (arm_prologue_this_id): Move PC and SP limit checks to
2032 arm_prologue_unwind_stop_reason.
2033 (arm_prologue_unwind) <stop_reason> : Set to
2034 arm_prologue_unwind_stop_reason.
2036 2015-02-09 Mark Wielaard <mjw@redhat.com>
2038 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
2039 DW_LANG_Fortran08 as language_fortran.
2041 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
2044 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
2045 of pointer against char.
2047 2015-02-09 Mark Wielaard <mjw@redhat.com>
2049 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
2050 (c_type_print_modifier): Likewise.
2051 * dwarf2read.c (read_tag_atomic_type): New function.
2052 (read_type_die_1): Handle DW_TAG_atomic_type.
2053 * gdbtypes.c (make_atomic_type): New function.
2054 (recursive_dump_type): Handle TYPE_ATOMIC.
2055 * gdbtypes.h (enum type_flag_values): Renumber.
2056 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
2057 (TYPE_ATOMIC): New macro.
2058 (make_atomic_type): Declare.
2060 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2062 * btrace.c (ftrace_find_call): Skip gaps.
2063 (ftrace_new_function): Initialize level.
2064 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
2065 (ftrace_new_switch): Update
2067 (ftrace_new_gap): New.
2068 (ftrace_update_function): Create new function after gap.
2069 (btrace_compute_ftrace_bts): Create gap on error.
2070 (btrace_stitch_bts): Update parameters. Clear trace if it
2072 (btrace_stitch_trace): Update parameters. Update callers.
2073 (btrace_clear): Reset the number of gaps.
2074 (btrace_insn_get): Return NULL if the iterator points to a gap.
2075 (btrace_insn_number): Return zero if the iterator points to a gap.
2076 (btrace_insn_end): Allow gaps at the end.
2077 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
2078 (btrace_find_insn_by_number): Assert that the found iterator does
2080 (btrace_call_next, btrace_call_prev): Assert that the last function
2082 * btrace.h (btrace_bts_error): New.
2083 (btrace_function): Update comment.
2084 (btrace_function) <insn, insn_offset, number>: Update comment.
2085 (btrace_function) <errcode>: New.
2086 (btrace_thread_info) <ngaps>: New.
2087 (btrace_thread_info) <replay>: Update comment.
2088 (btrace_insn_get): Update comment.
2089 * record-btrace.c (btrace_ui_out_decode_error): New.
2090 (record_btrace_info): Print number of gaps.
2091 (btrace_insn_history, btrace_call_history): Call
2092 btrace_ui_out_decode_error for gaps.
2093 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
2095 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2097 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
2098 * nat/linux-btrace.c: (btrace_this_cpu): New.
2099 (cpu_supports_bts): Call btrace_this_cpu.
2100 (intel_supports_bts): Add cpu parameter.
2102 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2104 * btrace.h (btrace_insn_class): New.
2105 (btrace_insn) <size, iclass>: New.
2106 * btrace.c (ftrace_find_call): Update parameters. Update users.
2107 Use instruction classification.
2108 (ftrace_new_return): Update parameters. Update users.
2109 (ftrace_update_function): Update parameters. Update users. Use
2110 instruction classification.
2111 (ftrace_update_insns): Update parameters. Update users.
2112 (ftrace_classify_insn): New.
2113 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
2114 TRY_CATCH around call to gdb_insn_length.
2116 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2118 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
2119 Update parameters. Update users.
2121 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2123 * btrace.c (parse_xml_btrace_conf_bts): Add size.
2124 (btrace_conf_bts_attributes): New.
2125 (btrace_conf_children): Add attributes.
2126 * common/btrace-common.h (btrace_config_bts): New.
2127 (btrace_config)<bts>: New.
2128 (btrace_config): Update comment.
2129 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
2131 * features/btrace-conf.dtd: Increment version. Add size
2132 attribute to bts element.
2133 * record-btrace.c (set_record_btrace_bts_cmdlist,
2134 show_record_btrace_bts_cmdlist): New.
2135 (record_btrace_adjust_size, record_btrace_print_bts_conf,
2136 record_btrace_print_conf, cmd_set_record_btrace_bts,
2137 cmd_show_record_btrace_bts): New.
2138 (record_btrace_info): Call record_btrace_print_conf.
2139 (_initialize_record_btrace): Add commands.
2140 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
2141 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
2142 (btrace_sync_conf): Synchronize bts size.
2143 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
2144 * NEWS: Announce new commands and new packets.
2146 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2148 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
2149 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
2150 (x86_linux_btrace_conf): New.
2151 (x86_linux_create_target): Initialize to_btrace_conf.
2152 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
2153 Check format. Split into this and ...
2154 (linux_enable_bts): ... this.
2155 (linux_btrace_conf): New.
2156 (perf_event_skip_record): Renamed into ...
2157 (perf_event_skip_bts_record): ... this. Updated users.
2158 (linux_disable_btrace): Split into this and ...
2159 (linux_disable_bts): ... this.
2160 (linux_read_btrace): Check format.
2161 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
2162 (linux_btrace_conf): New.
2163 (btrace_target_info)<ptid>: Moved.
2164 (btrace_target_info)<conf>: New.
2165 (btrace_target_info): Split into this and ...
2166 (btrace_tinfo_bts): ... this. Updated users.
2167 * btrace.c (btrace_enable): Update parameters.
2168 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
2169 (btrace_conf_children, btrace_conf_attributes)
2170 (btrace_conf_elements): New.
2171 * btrace.h (btrace_enable): Update parameters.
2172 (btrace_conf, parse_xml_btrace_conf): New.
2173 * common/btrace-common.h (btrace_config): New.
2174 * feature/btrace-conf.dtd: New.
2175 * record-btrace.c (record_btrace_conf): New.
2176 (record_btrace_cmdlist): New.
2177 (record_btrace_enable_warn, record_btrace_open): Pass
2178 &record_btrace_conf.
2179 (record_btrace_info): Print recording format.
2180 (cmd_record_btrace_bts_start): New.
2181 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
2182 (_initialize_record_btrace): Add "record btrace bts" subcommand.
2183 Add "record bts" alias command.
2184 * remote.c (remote_state)<btrace_config>: New.
2185 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
2186 (remote_protocol_features): Add qXfer:btrace-conf:read.
2187 (remote_open_1): Call remote_btrace_reset.
2188 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
2189 (btrace_target_info)<conf>: New.
2190 (btrace_sync_conf, btrace_read_config): New.
2191 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
2193 (remote_btrace_conf): New.
2194 (init_remote_ops): Initialize to_btrace_conf.
2195 (_initialize_remote): Add qXfer:btrace-conf packet.
2196 * target.c (target_enable_btrace): Update parameters.
2197 (target_btrace_conf): New.
2198 * target.h (target_enable_btrace): Update parameters.
2199 (target_btrace_conf): New.
2200 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
2201 (target_ops)<to_enable_btrace>: Update parameters and comment.
2202 (target_ops)<to_btrace_conf>: New.
2203 * target-delegates: Regenerate.
2204 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
2205 (target_debug_print_const_struct_btrace_target_info_p): New.
2206 * NEWS: Announce new command and new packet.
2208 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2210 * nat/linux-btrace.h (perf_event_buffer): New.
2211 (btrace_target_info) <buffer, size, data_head>: Replace with ...
2213 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
2214 (perf_event_buffer_size, perf_event_buffer_begin)
2215 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
2217 (perf_event_new_data): New.
2219 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2221 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
2222 * record-btrace.c (record_btrace_open): Remove call to
2223 target_supports_btrace.
2224 * remote.c (remote_supports_btrace): Update parameters.
2225 * target.c (target_supports_btrace): Update parameters.
2226 * target.h (to_supports_btrace, target_supports_btrace): Update
2228 * target-delegates.c: Regenerate.
2229 * target-debug.h (target_debug_print_enum_btrace_format): New.
2230 * nat/linux-btrace.c
2231 (kernel_supports_btrace): Rename into ...
2232 (kernel_supports_bts): ... this. Update users. Update warning text.
2233 (intel_supports_btrace): Rename into ...
2234 (intel_supports_bts): ... this. Update users.
2235 (cpu_supports_btrace): Rename into ...
2236 (cpu_supports_bts): ... this. Update users.
2237 (linux_supports_btrace): Update parameters. Split into this and ...
2238 (linux_supports_bts): ... this.
2239 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
2241 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
2243 * Makefile.in (SFILES): Add common/btrace-common.c.
2244 (COMMON_OBS): Add common/btrace-common.o.
2245 (btrace-common.o): Add build rules.
2246 * btrace.c (parse_xml_btrace): Update parameters.
2247 (parse_xml_btrace_block): Set format field.
2248 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
2249 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
2250 (btrace_compute_ftrace): Split into this and...
2251 (btrace_compute_ftrace_bts): ...this.
2252 (btrace_stitch_trace): Split into this and...
2253 (btrace_stitch_bts): ...this.
2254 * btrace.h (parse_xml_btrace): Update parameters.
2255 (make_cleanup_btrace_data): New.
2256 * common/btrace-common.c: New.
2257 * common/btrace-common.h: Include common-defs.h.
2258 (btrace_block_s): Update comment.
2259 (btrace_format): New.
2260 (btrace_format_string): New.
2261 (btrace_data_bts): New.
2263 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
2264 * remote.c (remote_read_btrace): Update parameters.
2265 * target.c (target_read_btrace): Update parameters.
2266 * target.h (target_read_btrace): Update parameters.
2267 (target_ops)<to_read_btrace>: Update parameters.
2268 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
2269 * target-delegates.c: Regenerate.
2270 * target-debug (target_debug_print_struct_btrace_data_p): New.
2271 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
2272 (linux_read_bts): ...this.
2273 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
2275 2015-02-06 Doug Evans <dje@google.com>
2277 * remote-m32r-sdi.c: Include symfile.h.
2279 2015-02-06 Doug Evans <dje@google.com>
2281 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
2282 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
2285 2015-02-06 Pedro Alves <palves@redhat.com>
2287 * linux-thread-db.c (find_new_threads_callback): Add debug output.
2289 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
2292 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
2293 (enable_count_command): Check args for NULL value.
2295 2015-02-05 Doug Evans <xdje42@gmail.com>
2297 * guile/scm-frame.c: Fix spelling errors in a comment.
2299 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2301 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
2302 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
2305 2015-02-04 Pedro Alves <palves@redhat.com>
2307 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
2308 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
2310 (resume_stopped_resumed_lwps): Don't check whether the thread is
2311 marked as executing.
2312 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
2314 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2316 * regset.h (struct regset): Add flags field.
2317 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
2318 * corelow.c (get_core_register_section): Add warning if the size
2319 exceeds the requested size and the regset does not have the
2320 REGSET_VARIABLE_SIZE flag set.
2321 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
2323 * armbsd-tdep.c (armbsd_gregset): Likewise.
2324 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
2325 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
2326 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
2327 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
2329 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2331 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
2332 For ".reg-xstate", explicitly specify the requested section size
2333 via X86_XSTATE_SIZE instead of just 0 on input and
2334 X86_XSTATE_MAX_SIZE on output.
2335 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
2338 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2341 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
2342 function type, particularly its SIZE parameter.
2343 * gdbarch.h: Regenerate.
2344 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
2345 actual against required size using ">=" instead of "==".
2346 (amd64_collect_fpregset): Likewise.
2347 * i386-tdep.c (i386_supply_gregset): Likewise.
2348 (i386_collect_gregset): Likewise.
2349 (i386_supply_fpregset): Likewise.
2350 (i386_collect_fpregset): Likewise.
2351 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
2352 (mips_fill_gregset_wrapper): Likewise.
2353 (mips_supply_fpregset_wrapper): Likewise.
2354 (mips_fill_fpregset_wrapper): Likewise.
2355 (mips64_supply_gregset_wrapper): Likewise.
2356 (mips64_fill_gregset_wrapper): Likewise.
2357 (mips64_supply_fpregset_wrapper): Likewise.
2358 (mips64_fill_fpregset_wrapper): Likewise.
2359 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
2360 (am33_supply_fpregset_method): Likewise.
2361 (am33_collect_gregset_method): Likewise.
2362 (am33_collect_fpregset_method): Likewise.
2364 2015-02-04 Doug Evans <dje@google.com>
2365 Pedro Alves <palves@redhat.com>
2366 Eli Zaretskii <eliz@gnu.org>
2369 * tui/tui-command.c (tui_refresh_cmd_win): New function.
2370 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
2371 * tui/tui-file.c: #include tui/tui-command.h.
2372 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
2373 (tui_file_flush): Refresh command window if stream is gdb_stdout.
2374 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
2376 2015-02-04 Pedro Alves <palves@redhat.com>
2379 * event-loop.c (gdb_do_one_event): Add default switch case.
2381 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2383 Filter out inferior gcc option -fpreprocessed.
2384 * compile/compile.c (filter_args): New function.
2387 2015-02-03 Pedro Alves <palves@redhat.com>
2389 * event-loop.c: Don't declare nor define a queue type for
2391 (event_queue): Delete.
2392 (create_event, create_file_event, gdb_event_xfree)
2393 (initialize_event_loop, process_event): Delete.
2394 (gdb_do_one_event): Return as soon as one event is handled.
2395 (handle_file_event): Change prototype. Used the passed in
2396 file_handler pointer and ready_mask instead of looping over all
2398 (gdb_wait_for_event): Update the poll/select timeouts before
2399 blocking. Run event handlers directly instead of queueing events.
2400 Return as soon as one event is handled.
2401 (struct async_event_handler_data): Delete.
2402 (invoke_async_event_handler): Delete.
2403 (check_async_event_handlers): Change return type to int. Run
2404 event handlers directly instead of queueing events. Return as
2405 soon as one event is handled.
2406 (handle_timer_event): Delete.
2407 (update_wait_timeout): New function, factored out from
2409 (poll_timers): Reimplement.
2410 * event-loop.h (initialize_event_loop): Delete declaration.
2411 * top.c (gdb_init): Don't call initialize_event_loop.
2413 2015-02-03 Pedro Alves <palves@redhat.com>
2415 * event-loop.c (clear_async_event_handler): New function.
2416 * event-loop.h (clear_async_event_handler): New declaration.
2417 * record-btrace.c (record_btrace_async): New function.
2418 (init_record_btrace_ops): Install record_btrace_async.
2419 * record-full.c (record_full_async): New function.
2420 (record_full_resume): Don't mark the async event source here.
2421 (init_record_full_ops): Install record_full_async.
2422 (record_full_core_resume): Don't mark the async event source here.
2423 (init_record_full_core_ops): Install record_full_async.
2424 * remote.c (remote_async): Mark and clear the async stop reply
2425 queue event-loop token as appropriate.
2427 2015-02-03 Pedro Alves <palves@redhat.com>
2429 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
2430 target_is_async_p instead of target_can_async.
2431 (linux_nat_wait): Use target_is_async_p instead of
2432 target_can_async. Don't enable async here.
2433 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
2434 target_is_async_p instead of target_can_async.
2436 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
2438 * varobj.h (lang_varobj_ops): Mention which return values need
2441 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2443 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
2445 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2448 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
2449 results found in the cache.
2451 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2454 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
2455 when allocating a new one.
2457 2015-02-01 Tom Tromey <tom@tromey.com>
2459 * MAINTAINERS: Remove myself.
2461 2015-01-31 Doug Evans <xdje42@gmail.com>
2463 * dwarf2read.c (process_structure_scope): Update setting of
2464 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
2465 * gdbtypes.c (internal_type_vptr_fieldno): New function.
2466 (set_type_vptr_fieldno): New function.
2467 (internal_type_vptr_basetype): New function.
2468 (set_type_vptr_basetype): New function.
2469 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
2471 (allocate_cplus_struct_type): Initialize vptr_fieldno.
2472 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
2473 (print_cplus_stuff): ... moved here.
2474 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
2475 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
2477 (struct cplus_struct_type): ... here. All uses updated.
2478 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
2479 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
2480 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
2481 * stabsread.c (read_tilde_fields): Update setting of
2482 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
2484 2015-01-31 Doug Evans <xdje42@gmail.com>
2486 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
2488 (cp_print_class_member): Rename local domain to self_type.
2489 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
2490 domain_type to self_type.
2491 (set_die_type) <need_gnat_info>: Handle
2492 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
2493 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
2494 TYPE_SPECIFIC_SELF_TYPE.
2495 * gdbtypes.c (internal_type_self_type): New function.
2496 (set_type_self_type): New function.
2497 (smash_to_memberptr_type): Rename parameter domain to self_type.
2498 Update setting of TYPE_SELF_TYPE.
2499 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
2500 (smash_to_method_type): Rename parameter domain to self_type.
2501 Update setting of TYPE_SELF_TYPE.
2502 (check_stub_method): Call smash_to_method_type.
2503 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
2504 (copy_type_recursive): Ditto.
2505 * gdbtypes.h (enum type_specific_kind): New value
2506 TYPE_SPECIFIC_SELF_TYPE.
2507 (struct main_type) <type_specific>: New member self_type.
2508 (struct cplus_struct_type) <fn_field.type>: Update comment.
2509 (TYPE_SELF_TYPE): Rewrite.
2510 (internal_type_self_type, set_type_self_type): Declare.
2511 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
2513 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
2514 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
2516 * stabsread.c (read_member_functions): Mark methods with
2517 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
2520 2015-01-31 Doug Evans <xdje42@gmail.com>
2522 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
2525 2015-01-31 Doug Evans <xdje42@gmail.com>
2527 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
2528 or unions. Return zero if union.
2529 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
2530 (gnuv3_rtti_type): Pass already-check_typedef'd value to
2532 (compute_vtable_size): Assert only passed structs.
2533 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
2535 2015-01-31 Doug Evans <xdje42@gmail.com>
2537 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
2540 2015-01-31 Gary Benson <gbenson@redhat.com>
2541 Doug Evans <dje@google.com>
2546 * cli/cli-cmds.c (complete_command): Notify user if max-completions
2548 * common/common-exceptions.h (enum errors)
2549 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
2550 * completer.h (get_max_completions_reached_message): New declaration.
2551 (max_completions): Likewise.
2552 (completion_tracker_t): New typedef.
2553 (new_completion_tracker): New declaration.
2554 (make_cleanup_free_completion_tracker): Likewise.
2555 (maybe_add_completion_enum): New enum.
2556 (maybe_add_completion): New declaration.
2557 (throw_max_completions_reached_error): Likewise.
2558 * completer.c (max_completions): New global variable.
2559 (new_completion_tracker): New function.
2560 (free_completion_tracker): Likewise.
2561 (make_cleanup_free_completion_tracker): Likewise.
2562 (maybe_add_completions): Likewise.
2563 (throw_max_completions_reached_error): Likewise.
2564 (complete_line): Remove duplicates and limit result to max_completions
2566 (get_max_completions_reached_message): New function.
2567 (gdb_display_match_list): Handle max_completions.
2568 (_initialize_completer): New declaration and function.
2569 * symtab.c: Include completer.h.
2570 (completion_tracker): New static variable.
2571 (completion_list_add_name): Call maybe_add_completion.
2572 (default_make_symbol_completion_list_break_on_1): Renamed from
2573 default_make_symbol_completion_list_break_on. Maintain
2574 completion_tracker across calls to completion_list_add_name.
2575 (default_make_symbol_completion_list_break_on): New function.
2576 * top.c (init_main): Set rl_completion_display_matches_hook.
2577 * tui/tui-io.c: Include completer.h.
2578 (tui_old_rl_display_matches_hook): New static global.
2579 (tui_rl_display_match_list): Notify user if max-completions reached.
2580 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
2581 * NEWS (New Options): Mention set/show max-completions.
2583 2015-01-31 Gary Benson <gbenson@redhat.com>
2585 * symtab.c (struct add_name_data) <code>: New field.
2587 (add_symtab_completions): New function.
2588 (symtab_expansion_callback): Likewise.
2589 (default_make_symbol_completion_list_break_on): Set datum.code.
2590 Move minimal symbol scan before calling expand_symtabs_matching.
2591 Scan known primary symtabs for externs and statics before calling
2592 expand_symtabs_matching. Pass symtab_expansion_callback as
2593 expansion_notify argument to expand_symtabs_matching. Do not scan
2594 primary symtabs for externs and statics after calling
2595 expand_symtabs_matching.
2597 2015-01-31 Gary Benson <gbenson@redhat.com>
2599 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
2600 (struct quick_symbol_functions) <expand_symtabs_matching>:
2601 New argument expansion_notify. All uses updated.
2602 (expand_symtabs_matching): New argument expansion_notify.
2604 * symfile-debug.c (debug_qf_expand_symtabs_matching):
2605 Also print expansion notify.
2606 * symtab.c (expand_symtabs_matching_via_partial): Call
2607 expansion_notify whenever a partial symbol table is expanded.
2608 * dwarf2read.c (dw2_expand_symtabs_matching): Call
2609 expansion_notify whenever a symbol table is instantiated.
2611 2015-01-31 Doug Evans <xdje42@gmail.com>
2613 * cli-out.c: #include completer.h, readline/readline.h.
2614 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
2615 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
2616 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
2617 * cli-out.h (cli_display_match_list): Declare.
2618 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
2619 (ELLIPSIS_LEN): Ditto.
2620 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
2621 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
2622 (gdb_fnprint, gdb_print_filename): Ditto.
2623 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
2624 (gdb_display_match_list): Ditto.
2625 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
2626 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
2627 (mld_beep_ftype, mld_read_key_ftype): Ditto.
2628 (match_list_displayer): New struct.
2629 (gdb_display_match_list): Declare.
2630 * top.c (init_main): Set rl_completion_display_matches_hook.
2631 * tui/tui-io.c: #include completer.h.
2632 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
2633 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
2634 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
2635 (tui_mld_getc, tui_mld_read_key): Ditto.
2636 (tui_rl_display_match_list): Rewrite.
2637 (tui_handle_resize_during_io): New arg for_completion. All callers
2640 2015-01-31 Doug Evans <xdje42@gmail.com>
2642 Add symbol lookup cache.
2643 * NEWS: Document new options and commands.
2644 * symtab.c (symbol_cache_key): New static global.
2645 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
2646 (SYMBOL_LOOKUP_FAILED): New macro.
2647 (symbol_cache_slot_state): New enum.
2648 (block_symbol_cache): New struct.
2649 (symbol_cache): New struct.
2650 (new_symbol_cache_size, symbol_cache_size): New static globals.
2651 (hash_symbol_entry, eq_symbol_entry): New functions.
2652 (symbol_cache_byte_size, resize_symbol_cache): New functions.
2653 (make_symbol_cache, free_symbol_cache): New functions.
2654 (get_symbol_cache, symbol_cache_cleanup): New function.
2655 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
2656 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
2657 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
2658 (symbol_cache_flush, symbol_cache_dump): New functions.
2659 (maintenance_print_symbol_cache): New function.
2660 (maintenance_flush_symbol_cache): New function.
2661 (symbol_cache_stats): New function.
2662 (maintenance_print_symbol_cache_statistics): New function.
2663 (symtab_new_objfile_observer): New function.
2664 (symtab_free_objfile_observer): New function.
2665 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
2666 (_initialize_symtab): Init symbol_cache_key. New parameter
2667 maint symbol-cache-size. New maint commands print symbol-cache,
2668 print symbol-cache-statistics, flush-symbol-cache.
2669 Install new_objfile, free_objfile observers.
2671 2015-01-31 Joel Brobecker <brobecker@adacore.com>
2674 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
2677 2015-01-31 Doug Evans <xdje42@gmail.com>
2679 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
2680 * auto-load.c: #include ctype.h.
2681 (struct auto_load_pspace_info): Replace member loaded_scripts with
2682 new members loaded_script_files, loaded_script_texts.
2683 (auto_load_pspace_data_cleanup): Update.
2684 (init_loaded_scripts_info): Update.
2685 (get_auto_load_pspace_data_for_loading): Update.
2686 (maybe_add_script_file): Renamed from maybe_add_script. All callers
2688 (maybe_add_script_text): New function.
2689 (clear_section_scripts): Update.
2690 (source_script_file, execute_script_contents): New functions.
2691 (source_section_scripts): Add support for
2692 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
2693 (print_scripts): New function.
2694 (auto_load_info_scripts): Also print inlined scripts.
2695 (maybe_print_unsupported_script_warning): Renamed from
2696 unsupported_script_warning_print. All callers updated.
2697 (maybe_print_script_not_found_warning): Renamed from
2698 script_not_found_warning_print. All callers updated.
2699 * extension-priv.h (struct extension_language_script_ops): New member
2700 objfile_script_executor.
2701 * extension.c (ext_lang_objfile_script_executor): New function.
2702 * extension.h (objfile_script_executor_func): New typedef.
2703 (ext_lang_objfile_script_executor): Declare.
2704 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
2705 * guile/guile.c (guile_extension_script_ops): Update.
2706 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
2707 * python/python.c (python_extension_script_ops): Update.
2708 (gdbpy_execute_objfile_script): New function.
2710 2015-01-31 Eli Zaretskii <eliz@gnu.org>
2712 * tui/tui-io.c (tui_expand_tabs): New function.
2713 (tui_puts, tui_redisplay_readline): Expand TABs into the
2714 appropriate number of spaces.
2715 * tui/tui-regs.c: Include tui-io.h.
2716 (tui_register_format): Call tui_expand_tabs to expand TABs into
2717 the appropriate number of spaces.
2718 * tui/tui-io.h: Add prototype for tui_expand_tabs.
2720 2015-01-30 Doug Evans <dje@google.com>
2722 * NEWS: "info source" command now display producer string if present.
2723 * source.c (source_info): Print producer string if present.
2725 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2727 * varobj.c (varobj_delete): Fix comment.
2729 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2731 * varobj.c (create_child): Modify comment.
2733 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2735 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
2737 (ada_name_of_variable): Same.
2738 (ada_path_expr_of_child): Same.
2739 (ada_value_of_variable): Same.
2740 (ada_value_is_changeable_p): Same.
2741 (ada_value_has_mutated): Same.
2742 * c-varobj.c (varobj_is_anonymous_child): Same.
2743 (c_is_path_expr_parent): Same.
2744 (c_number_of_children): Same.
2745 (c_name_of_variable): Same.
2746 (c_path_expr_of_child): Same.
2748 (c_value_of_variable): Same.
2749 (cplus_number_of_children): Same.
2750 (cplus_name_of_variable): Same.
2751 (cplus_path_expr_of_child): Same.
2752 (cplus_value_of_variable): Same.
2753 * jv-varobj.c (java_number_of_children): Same.
2754 (java_name_of_variable): Same.
2755 (java_path_expr_of_child): Same.
2756 (java_value_of_variable): Same.
2757 * varobj.c (number_of_children): Same.
2758 (name_of_variable): Same.
2760 (varobj_ensure_python_env): Same.
2761 (varobj_get_objname): Same.
2762 (varobj_get_expression): Same.
2763 (varobj_get_display_format): Same.
2764 (varobj_get_display_hint): Same.
2765 (varobj_has_more): Same.
2766 (varobj_get_thread_id): Same.
2767 (varobj_get_frozen): Same.
2768 (dynamic_varobj_has_child_method): Same.
2769 (varobj_get_gdb_type): Same.
2770 (is_path_expr_parent): Same.
2771 (varobj_default_is_path_expr_parent): Same.
2772 (varobj_get_language): Same.
2773 (varobj_get_attributes): Same.
2774 (varobj_is_dynamic_p): Same.
2775 (varobj_get_child_range): Same.
2776 (varobj_value_has_mutated): Same.
2777 (varobj_get_value_type): Same.
2778 (number_of_children): Same.
2779 (name_of_variable): Same.
2780 (check_scope): Same.
2781 (varobj_editable_p): Same.
2782 (varobj_value_is_changeable_p): Same.
2783 (varobj_floating_p): Same.
2784 (varobj_default_value_is_changeable_p): Same.
2786 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2788 * varobj.c (varobj_get_path_expr): Set var->path_expr.
2789 * c-varobj.c (c_path_expr_of_child): Set local var instead of
2791 (cplus_path_expr_of_child): Same.
2793 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2795 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
2797 (mi_cmd_var_info_expression): Same.
2798 * varobj.c (varobj_get_expression): Mention in the comment that
2799 the result must by freed by the caller.
2801 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2803 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
2805 (varobj_update_one): Same.
2806 * varobj.c (update_type_if_necessary): Free curr_type_str and
2808 (varobj_get_type): Specify in comment that the result needs to be
2809 freed by the caller.
2811 2015-01-29 Doug Evans <dje@google.com>
2814 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
2816 2015-01-25 Mark Wielaard <mjw@redhat.com>
2818 * dwarf2read.c (checkproducer): Call producer_is_gcc.
2819 * utils.c (producer_is_gcc_ge_4): Likewise.
2820 (producer_is_gcc): New function.
2821 * utils.h (producer_is_gcc): New declaration.
2823 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2825 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
2827 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
2828 parameter by "addr_stack" parameter.
2829 (resolve_dynamic_range): Replace "addr" parameter by
2830 "stack_addr" parameter. Update function documentation.
2831 Update code accordingly.
2832 (resolve_dynamic_array, resolve_dynamic_union)
2833 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
2834 (resolve_dynamic_type): Update code, following the changes made
2835 to resolve_dynamic_type_internal's interface.
2836 * dwarf2loc.h (struct property_addr_info): New.
2837 (dwarf2_evaluate_property): Replace "address" parameter
2838 by "addr_stack" parameter. Adjust function documentation.
2839 (struct dwarf2_offset_baton): New.
2840 (struct dwarf2_property_baton): Update documentation of
2841 field "referenced_type" to be more general. New field
2842 "offset_info" in union data field.
2843 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
2844 parameter by "addr_stack" parameter. Adjust code accordingly.
2845 Add support for PROP_ADDR_OFFSET properties.
2846 * dwarf2read.c (attr_to_dynamic_prop): Add support for
2847 DW_AT_data_member_location attributes as well. Use case
2848 statements instead of if/else condition.
2850 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2852 * ada-varobj.c (ada_varobj_get_array_number_of_children):
2853 Return zero if PARENT_VALUE is NULL and parent_type's
2854 range type is dynamic.
2856 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2858 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
2859 nonzero if the type's subtype is dynamic.
2860 (resolve_dynamic_range): Also resolve the range's subtype.
2862 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
2864 Pushed by Joel Brobecker <brobecker@adacore.com>.
2865 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
2867 2015-01-27 Doug Evans <dje@google.com>
2869 * NEWS: Mention gdb.Objfile.username.
2870 * python/py-objfile.c (objfpy_get_username): New function.
2871 (objfile_getset): Add "username".
2873 2015-01-24 Mark Wielaard <mjw@redhat.com>
2875 * stack.c (return_command): Markup warning message with _.
2877 2015-01-24 Doug Evans <xdje42@gmail.com>
2879 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
2881 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
2883 Fix 100x slowdown regression on DWZ files.
2884 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
2885 (struct line_header): Add offset and offset_in_dwz.
2886 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
2887 (free_line_header_voidp): New declaration.
2888 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
2890 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
2891 (handle_DW_AT_stmt_list): Use line_header_hash.
2892 (free_line_header_voidp): New function.
2893 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
2894 (dwarf_decode_lines): New parameter decode_mapping, use it.
2895 (dwarf2_free_objfile): Free line_header_hash.
2897 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
2900 * valops.c (value_rtti_indirect_type): Catch exception thrown by
2903 2015-01-15 Mark Wielaard <mjw@redhat.com>
2905 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
2907 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
2908 calling_convention an 8 bit bit field.
2909 (TYPE_NO_RETURN): New macro.
2910 * infcmd.c (finish_command): Query if function does not return
2912 * stack.c (return_command): Likewise.
2914 2015-01-23 Pedro Alves <palves@redhat.com>
2916 * linux-nat.c (linux_is_async_p): New macro.
2917 (linux_nat_is_async_p):
2918 (linux_nat_terminal_inferior): Check whether the target can async
2919 instead of whether it is already async.
2920 (linux_nat_terminal_ours): Don't check whether the target is
2922 (linux_async_pipe): Use linux_is_async_p.
2924 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2926 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
2928 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
2929 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
2930 Sort tp_array using tp_array_compar.
2931 (_initialize_thread): Extend thread_apply_all_command help.
2933 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2935 * corelow.c (core_open): Call also thread_command.
2936 * gdbthread.h (thread_command): New prototype moved from ...
2937 * thread.c (thread_command): ... here.
2938 (thread_command): Make it global.
2940 2015-01-22 Pedro Alves <palves@redhat.com>
2942 * configure.ac [*mingw32*]: Check $curses_found instead of
2944 * configure: Regenerate.
2945 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
2946 HAVE_NCURSES_NCURSES_H checks.
2948 2015-01-22 Eli Zaretskii <eliz@gnu.org>
2950 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
2951 fails with the 1st arg NULL, try again with "unknown". Don't test
2952 the "cup" capability: it isn't supported by the Windows port of
2953 ncurses, but the Windows console driver is still capable of
2956 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2958 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
2960 2015-01-22 Eli Zaretskii <eliz@gnu.org>
2962 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
2963 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
2964 reason that "make TAGS" is broken.
2966 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
2968 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
2969 and check additional store instructions.
2971 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
2973 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
2975 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
2977 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
2978 ppc_canonicalize_syscall, ppc_linux_syscall_record,
2979 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
2980 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
2981 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
2982 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
2983 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
2984 ppc_process_record_op19, ppc_process_record_op31,
2985 ppc_process_record_op59, ppc_process_record_op60,
2986 ppc_process_record_op63): Likewise.
2988 2015-01-20 Joel Brobecker <brobecker@adacore.com>
2990 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
2991 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
2994 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
2996 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
2997 ppc_process_record_op31, ppc_process_record_op59,
2998 ppc_process_record_op60, ppc_process_record_op63,
2999 ppc_process_record): Fix -Wformat warning.
3000 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
3001 Remove unused variables.
3003 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
3005 * MAINTAINERS (Write After Approval): Add "Chen Gang".
3007 2015-01-19 Eli Zaretskii <eliz@gnu.org>
3009 * configure.ac [*mingw32*]: Only add windows-termcap.o to
3010 CONFIG_OBS if not building with a curses library.
3011 * configure: Regenerate.
3013 * windows-termcap.c: Include defs.h. Make the whole body empty if
3014 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
3015 HAVE_NCURSES_NCURSES_H is defined.
3017 2015-01-19 Joel Brobecker <brobecker@adacore.com>
3019 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
3020 from end of line to start of next line.
3022 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
3024 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
3025 Scan PLT stub backward for reverse debugging.
3026 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
3028 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
3029 Ulrich Weigand <uweigand@de.ibm.com>
3031 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
3033 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
3035 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
3036 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
3037 (ppc_linux_init_abi): Set process_record, process_record_signal.
3038 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
3039 ppc_linux_record_tdep to gdbarch_tdep.
3040 (ppc_process_record): New declaration.
3041 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
3042 ppc_process_record_op19, ppc_process_record_op31,
3043 ppc_process_record_op59, ppc_process_record_op60,
3044 ppc_process_record_op63, ppc_process_record): New functions.
3046 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
3048 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
3049 rs6000_in_function_epilogue_frame_p and add an argument
3051 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
3052 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
3054 (rs6000_epilogue_frame_unwind): New.
3055 (rs6000_gdbarch_init): Append epilogue unwinder.
3057 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
3059 * nat/linux-personality.c: Replace "#ifndef
3060 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
3061 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
3064 2015-01-16 Eli Zaretskii <eliz@gnu.org>
3066 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
3068 (_initialize_tui_win) <border-kind, border-mode>:
3069 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
3070 (tui_set_tab_width_command): Fix the commentary.
3072 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
3074 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
3076 (tui_set_tab_width_command): Delete and recreate the source and
3077 the disassembly windows, to show the effect of the changed tab
3080 * tui/tui-data.h (LINE_PREFIX): Make shorter
3081 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
3082 "Thread NNNNN.XXXX" thread ID notation on Windows.
3084 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
3086 Fix gcc-5 compilation.
3087 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
3089 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
3091 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
3092 (linux-personality.o): New rule.
3093 * common/common-defs.h: Include <stdint.h>.
3094 * config/aarch64/linux.mh (NATDEPFILES): Include
3095 linux-personality.o.
3096 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
3097 * config/arm/linux.mh (NATDEPFILES): Likewise.
3098 * config/i386/linux64.mh (NATDEPFILES): Likewise.
3099 * config/i386/linux.mh (NATDEPFILES): Likewise.
3100 * config/ia64/linux.mh (NATDEPFILES): Likewise.
3101 * config/m32r/linux.mh (NATDEPFILES): Likewise.
3102 * config/m68k/linux.mh (NATDEPFILES): Likewise.
3103 * config/mips/linux.mh (NATDEPFILES): Likewise.
3104 * config/pa/linux.mh (NATDEPFILES): Likewise.
3105 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
3106 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
3107 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
3108 * config/s390/linux.mh (NATDEPFILES): Likewise.
3109 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
3110 * config/sparc/linux.mh (NATDEPFILES): Likewise.
3111 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
3112 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
3113 * defs.h: Remove #include <stdint.h> (moved to
3114 common/common-defs.h).
3115 * linux-nat.c: Include nat/linux-personality.h. Remove #include
3116 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
3117 nat/linux-personality.c).
3118 (linux_nat_create_inferior): Remove code to disable address space
3119 randomization (moved to nat/linux-personality.c). Create cleanup
3120 to disable address space randomization.
3121 * nat/linux-personality.c: New file.
3122 * nat/linux-personality.h: Likewise.
3124 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
3126 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
3127 common/posix-strerror.c.
3128 (posix-strerror.o): New rule.
3129 (mingw-strerror.o): Likewise.
3130 * common/common-utils.h (safe_strerror): Move prototype to here,
3132 * common/common.host: New file.
3133 * common/mingw-strerror.c: Likewise.
3134 * common/posix-strerror.c: Likewise.
3135 * configure: Regenerated.
3136 * configure.ac: Source common/common.host. Add variable
3137 common_host_obs to gdb_host_obs.
3138 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
3139 gdb/common/posix-strerror.c when warning about the use of
3141 * mingw-hdep.c (safe_strerror): Remove definition; move it to
3142 common/mingw-strerror.c.
3143 * posix-hdep.c (safe_strerror): Remove definition; move it to
3144 common/posix-hdep.c.
3145 * utils.h (safe_strerror): Remove prototype; move to
3146 common/common-utils.h.
3148 2015-01-15 Joel Brobecker <brobecker@adacore.com>
3152 2015-01-15 Joel Brobecker <brobecker@adacore.com>
3154 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
3155 ___XA type if the array has already been fixed.
3157 2015-01-14 Yao Qi <yao@codesourcery.com>
3159 * Makefile.in (ppc-linux.o): New rule.
3160 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
3161 * configure.ac: AC_CHECK_FUNCS(getauxval).
3162 * config.in: Re-generated.
3163 * configure: Re-generated.
3164 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
3166 * nat/ppc-linux.c: New file.
3167 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
3168 Call ppc64_64bit_inferior_p.
3170 2015-01-14 Yao Qi <yao@codesourcery.com>
3172 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
3174 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
3175 (PPC_FEATURE_HAS_DFP): Likewise.
3176 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
3177 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
3178 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
3179 Include "nat/ppc-linux.h".
3180 * nat/ppc-linux.h: New file.
3181 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
3183 2015-01-14 Pedro Alves <palves@redhat.com>
3186 * breakpoint.c: Include "interps.h".
3187 (bpstat_do_actions_1): Also check whether the interpreter is
3190 2015-01-14 Pedro Alves <palves@redhat.com>
3193 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
3194 reinstall if the interpreter is sync.
3196 2015-01-13 Doug Evans <dje@google.com>
3198 * objfiles.c (objfile_filename): New function.
3199 * objfiles.h (objfile_filename): Declare it.
3200 (objfile_name): Add function comment.
3201 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
3202 bfd file name (which may be realpath'd), and the original name.
3204 2015-01-13 Joel Brobecker <brobecker@adacore.com>
3206 * NEWS: Create a new section for the next release branch.
3207 Rename the section of the current branch, now that it has
3210 2015-01-13 Joel Brobecker <brobecker@adacore.com>
3212 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
3213 * version.in: Bump version to 7.9.50.DATE-cvs.
3215 2015-01-13 Joel Brobecker <brobecker@adacore.com>
3217 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
3218 Remove trailing new-line in argument of call to warning.
3220 2015-01-13 Joel Brobecker <brobecker@adacore.com>
3222 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
3223 new-line in argument of call to "warning".
3225 2015-01-13 Joel Brobecker <brobecker@adacore.com>
3227 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
3228 in static block, then try searching for primitive types.
3230 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
3232 * top.h (gdb_add_history): Declare.
3233 * top.c (command_count): New variable.
3234 (gdb_add_history): New function.
3235 (gdb_safe_append_history): New static function.
3236 (quit_force): Call it.
3237 (command_line_input): Use gdb_add_history instead of
3239 * event-top.c (command_line_handler): Likewise.
3241 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
3244 * darwin-nat.c: Replace <machine/setjmp.h> #include by
3245 <setjmp.h> #include.
3247 2015-01-11 Doug Evans <xdje42@gmail.com>
3249 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
3251 2015-01-11 Doug Evans <xdje42@gmail.com>
3254 * NEWS: The "maint demangle" command is renamed as "demangle".
3255 * demangle.c: #include cli/cli-utils.h, language.h.
3256 (demangle_command): New function.
3257 (_initialize_demangle): Add new command "demangle".
3258 * maint.c (maintenance_demangle): Stub out.
3259 (_initialize_maint_cmds): Update help text for "maint demangle",
3260 and mark as deprecated.
3262 2015-01-11 Mark Kettenis <kettenis@gnu.org>
3264 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
3265 inferior_thread is a function.
3267 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
3269 * Makefile.in (.y.c): Don't munge yacc's #line
3272 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
3274 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
3275 to prompt for input.
3276 * tui/tui-hooks.c (tui_query_hook): Remove.
3277 (tui_install_hooks): Don't set deprecated_query_hook.
3278 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
3279 height calculation. Always update the command window's cur_line.
3281 2015-01-09 Pedro Alves <palves@redhat.com>
3283 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
3285 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
3287 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
3288 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
3290 (check_stopped_by_watchpoint): New function.
3291 (save_sigtrap): Reimplement.
3292 (linux_nat_stopped_by_watchpoint): Adjust.
3293 (linux_nat_lp_status_is_event): Delete.
3294 (stop_wait_callback): Only call save_sigtrap after storing the
3296 (status_callback): If the thread had been stopped for a breakpoint
3297 that has since been removed, discard the event and resume the LWP.
3298 (count_events_callback, select_event_lwp_callback): Use
3299 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
3300 (cancel_breakpoint): Rename to ...
3301 (check_stopped_by_breakpoint): ... this. Record whether the LWP
3302 stopped for a software breakpoint or hardware breakpoint.
3303 (select_event_lwp): Only give preference to the stepping LWP in
3304 all-stop mode. Adjust comments.
3305 (stop_and_resume_callback): Remove references to new_pending_p.
3306 (linux_nat_filter_event): Likewise. Leave exit events of the
3307 leader thread pending here. Handle signal short circuiting here.
3308 Only call save_sigtrap after storing the pending waitstatus.
3309 (linux_nat_wait_1): Remove 'retry' label. Remove references to
3310 new_pending. Don't handle leaving events the caller is not
3311 interested in pending here, nor handle signal short-circuiting
3312 here. Also give equal priority to all LWPs that have had events
3313 in non-stop mode. If reporting a software breakpoint event,
3314 unadjust the LWP's PC.
3315 * linux-nat.h (enum lwp_stop_reason): New.
3316 (struct lwp_info) <stop_pc>: New field.
3317 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
3318 (struct lwp_info) <stop_reason>: New field.
3319 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
3321 2015-01-09 Pedro Alves <palves@redhat.com>
3323 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
3324 Set the LWP's 'resumed' flag.
3326 2015-01-09 Pedro Alves <palves@redhat.com>
3328 * linux-nat.c (linux_resume_one_lwp): New function.
3329 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
3330 (linux_nat_resume): Use lwp_status_pending_p and
3331 linux_resume_one_lwp.
3332 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
3333 (linux_handle_extended_wait): Use linux_resume_one_lwp.
3334 (status_callback, running_callback): Use lwp_status_pending_p.
3335 (lwp_status_pending_p): New function.
3336 (stop_and_resume_callback): Use lwp_status_pending_p.
3337 (linux_nat_filter_event): Use linux_resume_one_lwp.
3338 (linux_nat_wait_1): Always use status_callback to look for an LWP
3339 with a pending status. Use linux_resume_one_lwp.
3340 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
3341 linux_resume_one_lwp.
3343 2015-01-09 Pedro Alves <palves@redhat.com>
3345 * breakpoint.c (bp_location_inserted_here_p): New function,
3346 factored out from ...
3347 (breakpoint_inserted_here_p): ... here. Use
3348 ALL_BP_LOCATIONS_AT_ADDR.
3349 (software_breakpoint_inserted_here_p): Use
3350 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
3352 2014-01-09 Pedro Alves <palves@redhat.com>
3354 Skip enabling event reporting if the kernel supports
3356 * linux-thread-db.c: Include "nat/linux-ptrace.h".
3357 (thread_db_use_events): New function.
3358 (try_thread_db_load_1): Check thread_db_use_events before enabling
3360 (update_thread_state): New function.
3361 (attach_thread): Use it. Check thread_db_use_events before
3362 enabling event reporting.
3363 (thread_db_detach): Check thread_db_use_events before disabling
3365 (find_new_threads_callback): Check thread_db_use_events before
3366 enabling event reporting. Update the thread's state if not using
3367 libthread_db events.
3369 2015-01-09 Pedro Alves <palves@redhat.com>
3371 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
3372 about to wait for is > 0.
3373 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
3374 the kernel thread ID is -1.
3376 2015-01-09 Pedro Alves <palves@redhat.com>
3378 * linux-nat.c (attach_proc_task_lwp_callback): New function.
3379 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
3380 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
3381 ptrace option flags.
3382 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
3384 * nat/linux-procfs.c: Include <dirent.h>.
3385 (linux_proc_get_int): New parameter "warn". Handle it.
3386 (linux_proc_get_tgid): Adjust.
3387 (linux_proc_get_tracerpid): Rename to ...
3388 (linux_proc_get_tracerpid_nowarn): ... this.
3389 (linux_proc_pid_get_state): New function, factored out from
3390 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
3392 (linux_proc_pid_is_gone): New function.
3393 (linux_proc_pid_is_stopped): Adjust.
3394 (linux_proc_pid_is_zombie_maybe_warn)
3395 (linux_proc_pid_is_zombie_nowarn): New functions.
3396 (linux_proc_pid_is_zombie): Use
3397 linux_proc_pid_is_zombie_maybe_warn.
3398 (linux_proc_attach_tgid_threads): New function.
3399 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
3400 (linux_proc_get_tracerpid): Rename to ...
3401 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
3402 (linux_proc_pid_is_gone): New declaration.
3403 (linux_proc_pid_is_zombie): Update comment.
3404 (linux_proc_pid_is_zombie_nowarn): New declaration.
3405 (linux_proc_attach_lwp_func): New typedef.
3406 (linux_proc_attach_tgid_threads): New declaration.
3407 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
3408 use nowarn functions.
3409 (linux_ptrace_attach_fail_reason_string): Move here from
3410 gdbserver/linux-low.c and rename.
3411 (ptrace_supports_feature): If the current ptrace options are not
3412 known yet, check them now, instead of asserting.
3413 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
3416 2015-01-09 Pedro Alves <palves@redhat.com>
3418 * linux-thread-db.c (thread_db_find_new_threads_silently)
3419 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
3420 (find_new_threads_once): Print debug output on gdb_stdlog.
3422 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
3423 Pedro Alves <palves@redhat.com>
3425 * compile/compile.c: Include "gdb_wait.h".
3426 (do_rmdir): Check return value, and free 'zap'.
3428 2015-01-08 Pedro Alves <palves@redhat.com>
3429 Yao Qi <yao@codesourcery.com>
3431 * dwarf2loc.c (indirect_pieced_value): Don't call
3432 gdb_sign_extend. Call extract_signed_integer instead.
3433 * utils.c (gdb_sign_extend): Remove.
3434 * utils.h (gdb_sign_extend): Remove declaration.
3436 2015-01-07 Pierre Muller <muller@sourceware.org>
3439 * stabsread.c (define_symbol): Set language for C++ special symbols.
3441 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
3443 * inflow.c (initial_gdb_ttystate): Tweak comment.
3445 2015-01-07 Joel Brobecker <brobecker@adacore.com>
3447 * inflow.c (set_initial_gdb_ttystate): Add empty line after
3448 comment documenting function.
3450 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
3452 * terminal.h (set_initial_gdb_ttystate): Declare.
3453 * inflow.c (initial_gdb_ttystate): New static variable.
3454 (set_initial_gdb_ttystate): New setter.
3455 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
3456 instead of our current terminal state.
3457 * top.c (gdb_init): Call set_initial_gdb_ttystate.
3459 2015-01-07 Joel Brobecker <brobecker@adacore.com>
3461 * guile/scm-type.c (tyscm_array_1): Add comment.
3462 * python/py-type.c (typy_array_1): Add comment.
3464 2015-01-06 Joel Brobecker <brobecker@adacore.com>
3466 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
3467 error if N2 is equal to N1 - 1.
3469 2015-01-06 Joel Brobecker <brobecker@adacore.com>
3471 * python/py-type.c (typy_array_1): Do not raise negative-length
3472 exception if N2 is equal to N1 - 1.
3474 2015-01-03 Doug Evans <xdje42@gmail.com>
3476 * c-exp.y: Whitespace cleanup.
3477 (classify_inner_name): Remove extra ;.
3479 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
3481 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
3484 2015-01-02 Doug Evans <dje@google.com>
3486 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
3488 2015-01-02 Doug Evans <dje@google.com>
3490 * symtab.h (struct symbol): Fix typo in comment.
3492 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3494 Update year range in copyright notice of all files.
3496 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3498 * top.c (print_gdb_version): Update copyright year to 2015.
3500 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3502 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
3504 For older changes see ChangeLog-2014.
3510 version-control: never