3 Copyright (C) 2000-2018 Free Software Foundation, Inc.
5 This file is part of GDB.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program. If not, see <http://www.gnu.org/licenses/>. */
21 #include "arch-utils.h"
22 #include "readline/readline.h"
23 #include "readline/tilde.h"
24 #include "completer.h"
25 #include "target.h" /* For baud_rate, remote_debug and remote_timeout. */
26 #include "gdb_wait.h" /* For shell escape implementation. */
27 #include "gdb_regex.h" /* Used by apropos_command. */
28 #include "gdb_vfork.h"
30 #include "expression.h"
34 #include "filenames.h" /* For DOSish file names. */
38 #include "tracepoint.h"
39 #include "filestuff.h"
46 #include "cli/cli-decode.h"
47 #include "cli/cli-script.h"
48 #include "cli/cli-setshow.h"
49 #include "cli/cli-cmds.h"
50 #include "cli/cli-utils.h"
52 #include "extension.h"
53 #include "common/pathstuff.h"
56 #include "tui/tui.h" /* For tui_active et.al. */
63 /* Prototypes for local utility functions */
65 static void print_sal_location (const symtab_and_line
&sal
);
67 static void ambiguous_line_spec (gdb::array_view
<const symtab_and_line
> sals
,
68 const char *format
, ...)
69 ATTRIBUTE_PRINTF (2, 3);
71 static void filter_sals (std::vector
<symtab_and_line
> &);
74 /* Limit the call depth of user-defined commands */
75 unsigned int max_user_call_depth
;
77 /* Define all cmd_list_elements. */
79 /* Chain containing all defined commands. */
81 struct cmd_list_element
*cmdlist
;
83 /* Chain containing all defined info subcommands. */
85 struct cmd_list_element
*infolist
;
87 /* Chain containing all defined enable subcommands. */
89 struct cmd_list_element
*enablelist
;
91 /* Chain containing all defined disable subcommands. */
93 struct cmd_list_element
*disablelist
;
95 /* Chain containing all defined stop subcommands. */
97 struct cmd_list_element
*stoplist
;
99 /* Chain containing all defined delete subcommands. */
101 struct cmd_list_element
*deletelist
;
103 /* Chain containing all defined detach subcommands. */
105 struct cmd_list_element
*detachlist
;
107 /* Chain containing all defined kill subcommands. */
109 struct cmd_list_element
*killlist
;
111 /* Chain containing all defined set subcommands */
113 struct cmd_list_element
*setlist
;
115 /* Chain containing all defined unset subcommands */
117 struct cmd_list_element
*unsetlist
;
119 /* Chain containing all defined show subcommands. */
121 struct cmd_list_element
*showlist
;
123 /* Chain containing all defined \"set history\". */
125 struct cmd_list_element
*sethistlist
;
127 /* Chain containing all defined \"show history\". */
129 struct cmd_list_element
*showhistlist
;
131 /* Chain containing all defined \"unset history\". */
133 struct cmd_list_element
*unsethistlist
;
135 /* Chain containing all defined maintenance subcommands. */
137 struct cmd_list_element
*maintenancelist
;
139 /* Chain containing all defined "maintenance info" subcommands. */
141 struct cmd_list_element
*maintenanceinfolist
;
143 /* Chain containing all defined "maintenance print" subcommands. */
145 struct cmd_list_element
*maintenanceprintlist
;
147 /* Chain containing all defined "maintenance check" subcommands. */
149 struct cmd_list_element
*maintenancechecklist
;
151 struct cmd_list_element
*setprintlist
;
153 struct cmd_list_element
*showprintlist
;
155 struct cmd_list_element
*setdebuglist
;
157 struct cmd_list_element
*showdebuglist
;
159 struct cmd_list_element
*setchecklist
;
161 struct cmd_list_element
*showchecklist
;
163 /* Command tracing state. */
165 int source_verbose
= 0;
166 int trace_commands
= 0;
168 /* 'script-extension' option support. */
170 static const char script_ext_off
[] = "off";
171 static const char script_ext_soft
[] = "soft";
172 static const char script_ext_strict
[] = "strict";
174 static const char *const script_ext_enums
[] = {
181 static const char *script_ext_mode
= script_ext_soft
;
183 /* Utility used everywhere when at least one argument is needed and
187 error_no_arg (const char *why
)
189 error (_("Argument required (%s)."), why
);
192 /* The "info" command is defined as a prefix, with allow_unknown = 0.
193 Therefore, its own definition is called only for "info" with no
197 info_command (const char *arg
, int from_tty
)
199 printf_unfiltered (_("\"info\" must be followed by "
200 "the name of an info command.\n"));
201 help_list (infolist
, "info ", all_commands
, gdb_stdout
);
204 /* The "show" command with no arguments shows all the settings. */
207 show_command (const char *arg
, int from_tty
)
209 cmd_show_list (showlist
, from_tty
, "");
213 /* Provide documentation on command or list given by COMMAND. FROM_TTY
217 help_command (const char *command
, int from_tty
)
219 help_cmd (command
, gdb_stdout
);
223 /* Note: The "complete" command is used by Emacs to implement completion.
224 [Is that why this function writes output with *_unfiltered?] */
227 complete_command (const char *arg
, int from_tty
)
231 if (max_completions
== 0)
233 /* Only print this for non-mi frontends. An MI frontend may not
234 be able to handle this. */
235 if (!current_uiout
->is_mi_like_p ())
237 printf_unfiltered (_("max-completions is zero,"
238 " completion is disabled.\n"));
246 completion_tracker tracker_handle_brkchars
;
247 completion_tracker tracker_handle_completions
;
248 completion_tracker
*tracker
;
250 int quote_char
= '\0';
255 word
= completion_find_completion_word (tracker_handle_brkchars
,
258 /* Completers that provide a custom word point in the
259 handle_brkchars phase also compute their completions then.
260 Completers that leave the completion word handling to readline
261 must be called twice. */
262 if (tracker_handle_brkchars
.use_custom_word_point ())
263 tracker
= &tracker_handle_brkchars
;
266 complete_line (tracker_handle_completions
, word
, arg
, strlen (arg
));
267 tracker
= &tracker_handle_completions
;
270 CATCH (ex
, RETURN_MASK_ALL
)
276 std::string
arg_prefix (arg
, word
- arg
);
278 completion_result result
279 = tracker
->build_completion_result (word
, word
- arg
, strlen (arg
));
281 if (result
.number_matches
!= 0)
283 if (result
.number_matches
== 1)
284 printf_unfiltered ("%s%s\n", arg_prefix
.c_str (), result
.match_list
[0]);
287 result
.sort_match_list ();
289 for (size_t i
= 0; i
< result
.number_matches
; i
++)
291 printf_unfiltered ("%s%s",
293 result
.match_list
[i
+ 1]);
295 printf_unfiltered ("%c", quote_char
);
296 printf_unfiltered ("\n");
300 if (result
.number_matches
== max_completions
)
302 /* ARG_PREFIX and WORD are included in the output so that emacs
303 will include the message in the output. */
304 printf_unfiltered (_("%s%s %s\n"),
305 arg_prefix
.c_str (), word
,
306 get_max_completions_reached_message ());
312 is_complete_command (struct cmd_list_element
*c
)
314 return cmd_cfunc_eq (c
, complete_command
);
318 show_version (const char *args
, int from_tty
)
320 print_gdb_version (gdb_stdout
, true);
321 printf_filtered ("\n");
325 show_configuration (const char *args
, int from_tty
)
327 print_gdb_configuration (gdb_stdout
);
330 /* Handle the quit command. */
333 quit_command (const char *args
, int from_tty
)
337 /* An optional expression may be used to cause gdb to terminate with
338 the value of that expression. */
341 struct value
*val
= parse_and_eval (args
);
343 exit_code
= (int) value_as_long (val
);
346 if (!quit_confirm ())
347 error (_("Not confirmed."));
349 query_if_trace_running (from_tty
);
351 quit_force (args
? &exit_code
: NULL
, from_tty
);
355 pwd_command (const char *args
, int from_tty
)
358 error (_("The \"pwd\" command does not take an argument: %s"), args
);
360 gdb::unique_xmalloc_ptr
<char> cwd (getcwd (NULL
, 0));
363 error (_("Error finding name of working directory: %s"),
364 safe_strerror (errno
));
366 if (strcmp (cwd
.get (), current_directory
) != 0)
367 printf_unfiltered (_("Working directory %s\n (canonically %s).\n"),
368 current_directory
, cwd
.get ());
370 printf_unfiltered (_("Working directory %s.\n"), current_directory
);
374 cd_command (const char *dir
, int from_tty
)
377 /* Found something other than leading repetitions of "/..". */
381 /* If the new directory is absolute, repeat is a no-op; if relative,
382 repeat might be useful but is more likely to be a mistake. */
385 gdb::unique_xmalloc_ptr
<char> dir_holder
386 (tilde_expand (dir
!= NULL
? dir
: "~"));
387 dir
= dir_holder
.get ();
390 perror_with_name (dir
);
392 #ifdef HAVE_DOS_BASED_FILE_SYSTEM
393 /* There's too much mess with DOSish names like "d:", "d:.",
394 "d:./foo" etc. Instead of having lots of special #ifdef'ed code,
395 simply get the canonicalized name of the current directory. */
396 gdb::unique_xmalloc_ptr
<char> cwd (getcwd (NULL
, 0));
401 if (IS_DIR_SEPARATOR (dir
[len
- 1]))
403 /* Remove the trailing slash unless this is a root directory
404 (including a drive letter on non-Unix systems). */
405 if (!(len
== 1) /* "/" */
406 #ifdef HAVE_DOS_BASED_FILE_SYSTEM
407 && !(len
== 3 && dir
[1] == ':') /* "d:/" */
413 dir_holder
.reset (savestring (dir
, len
));
414 if (IS_ABSOLUTE_PATH (dir_holder
.get ()))
416 xfree (current_directory
);
417 current_directory
= dir_holder
.release ();
421 if (IS_DIR_SEPARATOR (current_directory
[strlen (current_directory
) - 1]))
422 current_directory
= concat (current_directory
, dir_holder
.get (),
425 current_directory
= concat (current_directory
, SLASH_STRING
,
426 dir_holder
.get (), (char *) NULL
);
429 /* Now simplify any occurrences of `.' and `..' in the pathname. */
432 for (p
= current_directory
; *p
;)
434 if (IS_DIR_SEPARATOR (p
[0]) && p
[1] == '.'
435 && (p
[2] == 0 || IS_DIR_SEPARATOR (p
[2])))
436 memmove (p
, p
+ 2, strlen (p
+ 2) + 1);
437 else if (IS_DIR_SEPARATOR (p
[0]) && p
[1] == '.' && p
[2] == '.'
438 && (p
[3] == 0 || IS_DIR_SEPARATOR (p
[3])))
442 /* Search backwards for the directory just before the "/.."
443 and obliterate it and the "/..". */
446 while (q
!= current_directory
&& !IS_DIR_SEPARATOR (q
[-1]))
449 if (q
== current_directory
)
450 /* current_directory is
451 a relative pathname ("can't happen"--leave it alone). */
455 memmove (q
- 1, p
+ 3, strlen (p
+ 3) + 1);
460 /* We are dealing with leading repetitions of "/..", for
461 example "/../..", which is the Mach super-root. */
471 forget_cached_source_info ();
474 pwd_command ((char *) 0, 1);
477 /* Show the current value of the 'script-extension' option. */
480 show_script_ext_mode (struct ui_file
*file
, int from_tty
,
481 struct cmd_list_element
*c
, const char *value
)
483 fprintf_filtered (file
,
484 _("Script filename extension recognition is \"%s\".\n"),
488 /* Try to open SCRIPT_FILE.
489 If successful, the full path name is stored in *FULL_PATHP,
490 and the stream is returned.
491 If not successful, return NULL; errno is set for the last file
494 If SEARCH_PATH is non-zero, and the file isn't found in cwd,
495 search for it in the source search path. */
497 gdb::optional
<open_script
>
498 find_and_open_script (const char *script_file
, int search_path
)
501 openp_flags search_flags
= OPF_TRY_CWD_FIRST
| OPF_RETURN_REALPATH
;
502 gdb::optional
<open_script
> opened
;
504 gdb::unique_xmalloc_ptr
<char> file (tilde_expand (script_file
));
507 search_flags
|= OPF_SEARCH_IN_PATH
;
509 /* Search for and open 'file' on the search path used for source
510 files. Put the full location in *FULL_PATHP. */
511 gdb::unique_xmalloc_ptr
<char> full_path
;
512 fd
= openp (source_path
, search_flags
,
513 file
.get (), O_RDONLY
, &full_path
);
518 FILE *result
= fdopen (fd
, FOPEN_RT
);
521 int save_errno
= errno
;
527 opened
.emplace (gdb_file_up (result
), std::move (full_path
));
532 /* Load script FILE, which has already been opened as STREAM.
533 FILE_TO_OPEN is the form of FILE to use if one needs to open the file.
534 This is provided as FILE may have been found via the source search path.
535 An important thing to note here is that FILE may be a symlink to a file
536 with a different or non-existing suffix, and thus one cannot infer the
537 extension language from FILE_TO_OPEN. */
540 source_script_from_stream (FILE *stream
, const char *file
,
541 const char *file_to_open
)
543 if (script_ext_mode
!= script_ext_off
)
545 const struct extension_language_defn
*extlang
546 = get_ext_lang_of_file (file
);
550 if (ext_lang_present_p (extlang
))
552 script_sourcer_func
*sourcer
553 = ext_lang_script_sourcer (extlang
);
555 gdb_assert (sourcer
!= NULL
);
556 sourcer (extlang
, stream
, file_to_open
);
559 else if (script_ext_mode
== script_ext_soft
)
561 /* Assume the file is a gdb script.
562 This is handled below. */
565 throw_ext_lang_unsupported (extlang
);
569 script_from_file (stream
, file
);
572 /* Worker to perform the "source" command.
574 If SEARCH_PATH is non-zero, and the file isn't found in cwd,
575 search for it in the source search path. */
578 source_script_with_search (const char *file
, int from_tty
, int search_path
)
581 if (file
== NULL
|| *file
== 0)
582 error (_("source command requires file name of file to source."));
584 gdb::optional
<open_script
> opened
= find_and_open_script (file
, search_path
);
587 /* The script wasn't found, or was otherwise inaccessible.
588 If the source command was invoked interactively, throw an
589 error. Otherwise (e.g. if it was invoked by a script),
590 just emit a warning, rather than cause an error. */
592 perror_with_name (file
);
595 perror_warning_with_name (file
);
600 /* The python support reopens the file, so we need to pass full_path here
601 in case the file was found on the search path. It's useful to do this
602 anyway so that error messages show the actual file used. But only do
603 this if we (may have) used search_path, as printing the full path in
604 errors for the non-search case can be more noise than signal. */
605 source_script_from_stream (opened
->stream
.get (), file
,
606 search_path
? opened
->full_path
.get () : file
);
609 /* Wrapper around source_script_with_search to export it to main.c
610 for use in loading .gdbinit scripts. */
613 source_script (const char *file
, int from_tty
)
615 source_script_with_search (file
, from_tty
, 0);
619 source_command (const char *args
, int from_tty
)
621 const char *file
= args
;
624 scoped_restore save_source_verbose
= make_scoped_restore (&source_verbose
);
626 /* -v causes the source command to run in verbose mode.
627 -s causes the file to be searched in the source search path,
628 even if the file name contains a '/'.
629 We still have to be able to handle filenames with spaces in a
630 backward compatible way, so buildargv is not appropriate. */
634 while (args
[0] != '\0')
636 /* Make sure leading white space does not break the
638 args
= skip_spaces (args
);
643 if (args
[1] == 'v' && isspace (args
[2]))
647 /* Skip passed -v. */
650 else if (args
[1] == 's' && isspace (args
[2]))
654 /* Skip passed -s. */
661 file
= skip_spaces (args
);
664 source_script_with_search (file
, from_tty
, search_path
);
669 echo_command (const char *text
, int from_tty
)
671 const char *p
= text
;
675 while ((c
= *p
++) != '\0')
679 /* \ at end of argument is used after spaces
680 so they won't be lost. */
684 c
= parse_escape (get_current_arch (), &p
);
686 printf_filtered ("%c", c
);
689 printf_filtered ("%c", c
);
692 reset_terminal_style (gdb_stdout
);
694 /* Force this output to appear now. */
696 gdb_flush (gdb_stdout
);
700 shell_escape (const char *arg
, int from_tty
)
702 #if defined(CANT_FORK) || \
703 (!defined(HAVE_WORKING_VFORK) && !defined(HAVE_WORKING_FORK))
704 /* If ARG is NULL, they want an inferior shell, but `system' just
705 reports if the shell is available when passed a NULL arg. */
706 int rc
= system (arg
? arg
: "");
709 arg
= "inferior shell";
713 fprintf_unfiltered (gdb_stderr
, "Cannot execute %s: %s\n", arg
,
714 safe_strerror (errno
));
715 gdb_flush (gdb_stderr
);
719 fprintf_unfiltered (gdb_stderr
, "%s exited with status %d\n", arg
, rc
);
720 gdb_flush (gdb_stderr
);
723 /* Make sure to return to the directory GDB thinks it is, in case
724 the shell command we just ran changed it. */
725 chdir (current_directory
);
727 #else /* Can fork. */
730 if ((pid
= vfork ()) == 0)
732 const char *p
, *user_shell
= get_shell ();
736 /* Get the name of the shell for arg0. */
737 p
= lbasename (user_shell
);
740 execl (user_shell
, p
, (char *) 0);
742 execl (user_shell
, p
, "-c", arg
, (char *) 0);
744 fprintf_unfiltered (gdb_stderr
, "Cannot execute %s: %s\n", user_shell
,
745 safe_strerror (errno
));
746 gdb_flush (gdb_stderr
);
751 waitpid (pid
, &status
, 0);
753 error (_("Fork failed"));
754 #endif /* Can fork. */
757 /* Implementation of the "shell" command. */
760 shell_command (const char *arg
, int from_tty
)
762 shell_escape (arg
, from_tty
);
766 edit_command (const char *arg
, int from_tty
)
768 struct symtab_and_line sal
;
774 /* Pull in the current default source line if necessary. */
777 set_default_source_symtab_and_line ();
778 sal
= get_current_source_symtab_and_line ();
781 /* Bare "edit" edits file with present line. */
786 error (_("No default source file yet."));
787 sal
.line
+= get_lines_to_list () / 2;
793 /* Now should only be one argument -- decode it in SAL. */
795 event_location_up location
= string_to_event_location (&arg1
,
797 std::vector
<symtab_and_line
> sals
= decode_line_1 (location
.get (),
798 DECODE_LINE_LIST_MODE
,
807 if (sals
.size () > 1)
809 ambiguous_line_spec (sals
,
810 _("Specified line is ambiguous:\n"));
817 error (_("Junk at end of line specification."));
819 /* If line was specified by address, first print exactly which
820 line, and which file. In this case, sal.symtab == 0 means
821 address is outside of all known source files, not that user
822 failed to give a filename. */
825 struct gdbarch
*gdbarch
;
828 error (_("No source file for address %s."),
829 paddress (get_current_arch (), sal
.pc
));
831 gdbarch
= get_objfile_arch (SYMTAB_OBJFILE (sal
.symtab
));
832 sym
= find_pc_function (sal
.pc
);
834 printf_filtered ("%s is in %s (%s:%d).\n",
835 paddress (gdbarch
, sal
.pc
),
836 SYMBOL_PRINT_NAME (sym
),
837 symtab_to_filename_for_display (sal
.symtab
),
840 printf_filtered ("%s is at %s:%d.\n",
841 paddress (gdbarch
, sal
.pc
),
842 symtab_to_filename_for_display (sal
.symtab
),
846 /* If what was given does not imply a symtab, it must be an
847 undebuggable symbol which means no source code. */
850 error (_("No line number known for %s."), arg
);
853 if ((editor
= getenv ("EDITOR")) == NULL
)
856 fn
= symtab_to_fullname (sal
.symtab
);
858 /* Quote the file name, in case it has whitespace or other special
860 p
= xstrprintf ("%s +%d \"%s\"", editor
, sal
.line
, fn
);
861 shell_escape (p
, from_tty
);
866 list_command (const char *arg
, int from_tty
)
876 /* Pull in the current default source line if necessary. */
877 if (arg
== NULL
|| ((arg
[0] == '+' || arg
[0] == '-') && arg
[1] == '\0'))
879 set_default_source_symtab_and_line ();
880 symtab_and_line cursal
= get_current_source_symtab_and_line ();
882 /* If this is the first "list" since we've set the current
883 source line, center the listing around that line. */
884 if (get_first_line_listed () == 0)
888 first
= std::max (cursal
.line
- get_lines_to_list () / 2, 1);
890 /* A small special case --- if listing backwards, and we
891 should list only one line, list the preceding line,
892 instead of the exact line we've just shown after e.g.,
893 stopping for a breakpoint. */
894 if (arg
!= NULL
&& arg
[0] == '-'
895 && get_lines_to_list () == 1 && first
> 1)
898 print_source_lines (cursal
.symtab
, first
,
899 first
+ get_lines_to_list (), 0);
902 /* "l" or "l +" lists next ten lines. */
903 else if (arg
== NULL
|| arg
[0] == '+')
904 print_source_lines (cursal
.symtab
, cursal
.line
,
905 cursal
.line
+ get_lines_to_list (), 0);
907 /* "l -" lists previous ten lines, the ones before the ten just
909 else if (arg
[0] == '-')
911 if (get_first_line_listed () == 1)
912 error (_("Already at the start of %s."),
913 symtab_to_filename_for_display (cursal
.symtab
));
914 print_source_lines (cursal
.symtab
,
915 std::max (get_first_line_listed ()
916 - get_lines_to_list (), 1),
917 get_first_line_listed (), 0);
923 /* Now if there is only one argument, decode it in SAL
925 If there are two arguments, decode them in SAL and SAL_END
926 and clear NO_END; however, if one of the arguments is blank,
927 set DUMMY_BEG or DUMMY_END to record that fact. */
929 if (!have_full_symbols () && !have_partial_symbols ())
930 error (_("No symbol table is loaded. Use the \"file\" command."));
932 std::vector
<symtab_and_line
> sals
;
933 symtab_and_line sal
, sal_end
;
940 event_location_up location
= string_to_event_location (&arg1
,
942 sals
= decode_line_1 (location
.get (), DECODE_LINE_LIST_MODE
,
954 /* Record whether the BEG arg is all digits. */
956 for (p
= arg
; p
!= arg1
&& *p
>= '0' && *p
<= '9'; p
++);
957 linenum_beg
= (p
== arg1
);
959 /* Save the range of the first argument, in case we need to let the
960 user know it was ambiguous. */
961 const char *beg
= arg
;
962 size_t beg_len
= arg1
- beg
;
964 while (*arg1
== ' ' || *arg1
== '\t')
969 if (sals
.size () > 1)
971 ambiguous_line_spec (sals
,
972 _("Specified first line '%.*s' is ambiguous:\n"),
977 while (*arg1
== ' ' || *arg1
== '\t')
983 /* Save the last argument, in case we need to let the user
984 know it was ambiguous. */
985 const char *end_arg
= arg1
;
987 event_location_up location
988 = string_to_event_location (&arg1
, current_language
);
990 std::vector
<symtab_and_line
> sals_end
992 ? decode_line_1 (location
.get (), DECODE_LINE_LIST_MODE
,
994 : decode_line_1 (location
.get (), DECODE_LINE_LIST_MODE
,
995 NULL
, sal
.symtab
, sal
.line
));
997 filter_sals (sals_end
);
998 if (sals_end
.empty ())
1000 if (sals_end
.size () > 1)
1002 ambiguous_line_spec (sals_end
,
1003 _("Specified last line '%s' is ambiguous:\n"),
1007 sal_end
= sals_end
[0];
1012 error (_("Junk at end of line specification."));
1014 if (!no_end
&& !dummy_beg
&& !dummy_end
1015 && sal
.symtab
!= sal_end
.symtab
)
1016 error (_("Specified first and last lines are in different files."));
1017 if (dummy_beg
&& dummy_end
)
1018 error (_("Two empty args do not say what lines to list."));
1020 /* If line was specified by address,
1021 first print exactly which line, and which file.
1023 In this case, sal.symtab == 0 means address is outside of all
1024 known source files, not that user failed to give a filename. */
1027 struct gdbarch
*gdbarch
;
1029 if (sal
.symtab
== 0)
1030 error (_("No source file for address %s."),
1031 paddress (get_current_arch (), sal
.pc
));
1033 gdbarch
= get_objfile_arch (SYMTAB_OBJFILE (sal
.symtab
));
1034 sym
= find_pc_function (sal
.pc
);
1036 printf_filtered ("%s is in %s (%s:%d).\n",
1037 paddress (gdbarch
, sal
.pc
),
1038 SYMBOL_PRINT_NAME (sym
),
1039 symtab_to_filename_for_display (sal
.symtab
), sal
.line
);
1041 printf_filtered ("%s is at %s:%d.\n",
1042 paddress (gdbarch
, sal
.pc
),
1043 symtab_to_filename_for_display (sal
.symtab
), sal
.line
);
1046 /* If line was not specified by just a line number, and it does not
1047 imply a symtab, it must be an undebuggable symbol which means no
1050 if (!linenum_beg
&& sal
.symtab
== 0)
1051 error (_("No line number known for %s."), arg
);
1053 /* If this command is repeated with RET,
1054 turn it into the no-arg variant. */
1057 set_repeat_arguments ("");
1059 if (dummy_beg
&& sal_end
.symtab
== 0)
1060 error (_("No default source file yet. Do \"help list\"."));
1062 print_source_lines (sal_end
.symtab
,
1063 std::max (sal_end
.line
- (get_lines_to_list () - 1), 1),
1064 sal_end
.line
+ 1, 0);
1065 else if (sal
.symtab
== 0)
1066 error (_("No default source file yet. Do \"help list\"."));
1069 for (int i
= 0; i
< sals
.size (); i
++)
1072 int first_line
= sal
.line
- get_lines_to_list () / 2;
1075 if (sals
.size () > 1)
1076 print_sal_location (sal
);
1077 print_source_lines (sal
.symtab
,
1079 first_line
+ get_lines_to_list (),
1084 print_source_lines (sal
.symtab
, sal
.line
,
1086 ? sal
.line
+ get_lines_to_list ()
1087 : sal_end
.line
+ 1),
1091 /* Subroutine of disassemble_command to simplify it.
1092 Perform the disassembly.
1093 NAME is the name of the function if known, or NULL.
1094 [LOW,HIGH) are the range of addresses to disassemble.
1095 BLOCK is the block to disassemble; it needs to be provided
1096 when non-contiguous blocks are disassembled; otherwise
1098 MIXED is non-zero to print source with the assembler. */
1101 print_disassembly (struct gdbarch
*gdbarch
, const char *name
,
1102 CORE_ADDR low
, CORE_ADDR high
,
1103 const struct block
*block
,
1104 gdb_disassembly_flags flags
)
1107 if (!tui_is_window_visible (DISASSEM_WIN
))
1110 printf_filtered ("Dump of assembler code ");
1112 printf_filtered ("for function %s:\n", name
);
1113 if (block
== nullptr || BLOCK_CONTIGUOUS_P (block
))
1116 printf_filtered ("from %s to %s:\n",
1117 paddress (gdbarch
, low
), paddress (gdbarch
, high
));
1119 /* Dump the specified range. */
1120 gdb_disassembly (gdbarch
, current_uiout
, flags
, -1, low
, high
);
1124 for (int i
= 0; i
< BLOCK_NRANGES (block
); i
++)
1126 CORE_ADDR range_low
= BLOCK_RANGE_START (block
, i
);
1127 CORE_ADDR range_high
= BLOCK_RANGE_END (block
, i
);
1128 printf_filtered (_("Address range %s to %s:\n"),
1129 paddress (gdbarch
, range_low
),
1130 paddress (gdbarch
, range_high
));
1131 gdb_disassembly (gdbarch
, current_uiout
, flags
, -1,
1132 range_low
, range_high
);
1135 printf_filtered ("End of assembler dump.\n");
1136 gdb_flush (gdb_stdout
);
1141 tui_show_assembly (gdbarch
, low
);
1146 /* Subroutine of disassemble_command to simplify it.
1147 Print a disassembly of the current function according to FLAGS. */
1150 disassemble_current_function (gdb_disassembly_flags flags
)
1152 struct frame_info
*frame
;
1153 struct gdbarch
*gdbarch
;
1154 CORE_ADDR low
, high
, pc
;
1156 const struct block
*block
;
1158 frame
= get_selected_frame (_("No frame selected."));
1159 gdbarch
= get_frame_arch (frame
);
1160 pc
= get_frame_address_in_block (frame
);
1161 if (find_pc_partial_function (pc
, &name
, &low
, &high
, &block
) == 0)
1162 error (_("No function contains program counter for selected frame."));
1164 /* NOTE: cagney/2003-02-13 The `tui_active' was previously
1167 /* FIXME: cagney/2004-02-07: This should be an observer. */
1168 low
= tui_get_low_disassembly_address (gdbarch
, low
, pc
);
1170 low
+= gdbarch_deprecated_function_start_offset (gdbarch
);
1172 print_disassembly (gdbarch
, name
, low
, high
, block
, flags
);
1175 /* Dump a specified section of assembly code.
1179 - dump the assembly code for the function of the current pc
1180 disassemble [/mrs] addr
1181 - dump the assembly code for the function at ADDR
1182 disassemble [/mrs] low,high
1183 disassemble [/mrs] low,+length
1184 - dump the assembly code in the range [LOW,HIGH), or [LOW,LOW+length)
1186 A /m modifier will include source code with the assembly in a
1187 "source centric" view. This view lists only the file of the first insn,
1188 even if other source files are involved (e.g., inlined functions), and
1189 the output is in source order, even with optimized code. This view is
1190 considered deprecated as it hasn't been useful in practice.
1192 A /r modifier will include raw instructions in hex with the assembly.
1194 A /s modifier will include source code with the assembly, like /m, with
1195 two important differences:
1196 1) The output is still in pc address order.
1197 2) File names and contents for all relevant source files are displayed. */
1200 disassemble_command (const char *arg
, int from_tty
)
1202 struct gdbarch
*gdbarch
= get_current_arch ();
1203 CORE_ADDR low
, high
;
1206 gdb_disassembly_flags flags
;
1208 const struct block
*block
= nullptr;
1219 error (_("Missing modifier."));
1221 while (*p
&& ! isspace (*p
))
1226 flags
|= DISASSEMBLY_SOURCE_DEPRECATED
;
1229 flags
|= DISASSEMBLY_RAW_INSN
;
1232 flags
|= DISASSEMBLY_SOURCE
;
1235 error (_("Invalid disassembly modifier."));
1239 p
= skip_spaces (p
);
1242 if ((flags
& (DISASSEMBLY_SOURCE_DEPRECATED
| DISASSEMBLY_SOURCE
))
1243 == (DISASSEMBLY_SOURCE_DEPRECATED
| DISASSEMBLY_SOURCE
))
1244 error (_("Cannot specify both /m and /s."));
1248 flags
|= DISASSEMBLY_OMIT_FNAME
;
1249 disassemble_current_function (flags
);
1253 pc
= value_as_address (parse_to_comma_and_eval (&p
));
1259 if (find_pc_partial_function (pc
, &name
, &low
, &high
, &block
) == 0)
1260 error (_("No function contains specified address."));
1262 /* NOTE: cagney/2003-02-13 The `tui_active' was previously
1265 /* FIXME: cagney/2004-02-07: This should be an observer. */
1266 low
= tui_get_low_disassembly_address (gdbarch
, low
, pc
);
1268 low
+= gdbarch_deprecated_function_start_offset (gdbarch
);
1269 flags
|= DISASSEMBLY_OMIT_FNAME
;
1273 /* Two arguments. */
1276 p
= skip_spaces (p
);
1282 high
= parse_and_eval_address (p
);
1287 print_disassembly (gdbarch
, name
, low
, high
, block
, flags
);
1291 make_command (const char *arg
, int from_tty
)
1294 shell_escape ("make", from_tty
);
1297 std::string cmd
= std::string ("make ") + arg
;
1299 shell_escape (cmd
.c_str (), from_tty
);
1304 show_user (const char *args
, int from_tty
)
1306 struct cmd_list_element
*c
;
1307 extern struct cmd_list_element
*cmdlist
;
1311 const char *comname
= args
;
1313 c
= lookup_cmd (&comname
, cmdlist
, "", 0, 1);
1314 if (!cli_user_command_p (c
))
1315 error (_("Not a user command."));
1316 show_user_1 (c
, "", args
, gdb_stdout
);
1320 for (c
= cmdlist
; c
; c
= c
->next
)
1322 if (cli_user_command_p (c
) || c
->prefixlist
!= NULL
)
1323 show_user_1 (c
, "", c
->name
, gdb_stdout
);
1328 /* Search through names of commands and documentations for a certain
1329 regular expression. */
1332 apropos_command (const char *searchstr
, int from_tty
)
1334 if (searchstr
== NULL
)
1335 error (_("REGEXP string is empty"));
1337 compiled_regex
pattern (searchstr
, REG_ICASE
,
1338 _("Error in regular expression"));
1340 apropos_cmd (gdb_stdout
, cmdlist
, pattern
, "");
1343 /* Subroutine of alias_command to simplify it.
1344 Return the first N elements of ARGV flattened back to a string
1345 with a space separating each element.
1346 ARGV may not be NULL.
1347 This does not take care of quoting elements in case they contain spaces
1351 argv_to_string (char **argv
, int n
)
1356 gdb_assert (argv
!= NULL
);
1357 gdb_assert (n
>= 0 && n
<= countargv (argv
));
1359 for (i
= 0; i
< n
; ++i
)
1369 /* Subroutine of alias_command to simplify it.
1370 Return TRUE if COMMAND exists, unambiguously. Otherwise FALSE. */
1373 valid_command_p (const char *command
)
1375 struct cmd_list_element
*c
;
1377 c
= lookup_cmd_1 (& command
, cmdlist
, NULL
, 1);
1379 if (c
== NULL
|| c
== (struct cmd_list_element
*) -1)
1382 /* This is the slightly tricky part.
1383 lookup_cmd_1 will return a pointer to the last part of COMMAND
1384 to match, leaving COMMAND pointing at the remainder. */
1385 while (*command
== ' ' || *command
== '\t')
1387 return *command
== '\0';
1390 /* Called when "alias" was incorrectly used. */
1393 alias_usage_error (void)
1395 error (_("Usage: alias [-a] [--] ALIAS = COMMAND"));
1398 /* Make an alias of an existing command. */
1401 alias_command (const char *args
, int from_tty
)
1403 int i
, alias_argc
, command_argc
;
1404 int abbrev_flag
= 0;
1406 const char *alias
, *command
;
1408 if (args
== NULL
|| strchr (args
, '=') == NULL
)
1409 alias_usage_error ();
1411 equals
= strchr (args
, '=');
1412 std::string
args2 (args
, equals
- args
);
1414 gdb_argv
built_alias_argv (args2
.c_str ());
1415 gdb_argv
command_argv (equals
+ 1);
1417 char **alias_argv
= built_alias_argv
.get ();
1418 while (alias_argv
[0] != NULL
)
1420 if (strcmp (alias_argv
[0], "-a") == 0)
1425 else if (strcmp (alias_argv
[0], "--") == 0)
1434 if (alias_argv
[0] == NULL
|| command_argv
[0] == NULL
1435 || *alias_argv
[0] == '\0' || *command_argv
[0] == '\0')
1436 alias_usage_error ();
1438 for (i
= 0; alias_argv
[i
] != NULL
; ++i
)
1440 if (! valid_user_defined_cmd_name_p (alias_argv
[i
]))
1443 error (_("Invalid command name: %s"), alias_argv
[i
]);
1445 error (_("Invalid command element name: %s"), alias_argv
[i
]);
1449 alias_argc
= countargv (alias_argv
);
1450 command_argc
= command_argv
.count ();
1452 /* COMMAND must exist.
1453 Reconstruct the command to remove any extraneous spaces,
1454 for better error messages. */
1455 std::string
command_string (argv_to_string (command_argv
.get (),
1457 command
= command_string
.c_str ();
1458 if (! valid_command_p (command
))
1459 error (_("Invalid command to alias to: %s"), command
);
1461 /* ALIAS must not exist. */
1462 std::string
alias_string (argv_to_string (alias_argv
, alias_argc
));
1463 alias
= alias_string
.c_str ();
1464 if (valid_command_p (alias
))
1465 error (_("Alias already exists: %s"), alias
);
1467 /* If ALIAS is one word, it is an alias for the entire COMMAND.
1468 Example: alias spe = set print elements
1470 Otherwise ALIAS and COMMAND must have the same number of words,
1471 and every word except the last must match; and the last word of
1472 ALIAS is made an alias of the last word of COMMAND.
1473 Example: alias set print elms = set pr elem
1474 Note that unambiguous abbreviations are allowed. */
1476 if (alias_argc
== 1)
1478 /* add_cmd requires *we* allocate space for name, hence the xstrdup. */
1479 add_com_alias (xstrdup (alias_argv
[0]), command
, class_alias
,
1484 const char *alias_prefix
, *command_prefix
;
1485 struct cmd_list_element
*c_alias
, *c_command
;
1487 if (alias_argc
!= command_argc
)
1488 error (_("Mismatched command length between ALIAS and COMMAND."));
1490 /* Create copies of ALIAS and COMMAND without the last word,
1491 and use that to verify the leading elements match. */
1492 std::string
alias_prefix_string (argv_to_string (alias_argv
,
1494 std::string
command_prefix_string (argv_to_string (alias_argv
,
1496 alias_prefix
= alias_prefix_string
.c_str ();
1497 command_prefix
= command_prefix_string
.c_str ();
1499 c_command
= lookup_cmd_1 (& command_prefix
, cmdlist
, NULL
, 1);
1500 /* We've already tried to look up COMMAND. */
1501 gdb_assert (c_command
!= NULL
1502 && c_command
!= (struct cmd_list_element
*) -1);
1503 gdb_assert (c_command
->prefixlist
!= NULL
);
1504 c_alias
= lookup_cmd_1 (& alias_prefix
, cmdlist
, NULL
, 1);
1505 if (c_alias
!= c_command
)
1506 error (_("ALIAS and COMMAND prefixes do not match."));
1508 /* add_cmd requires *we* allocate space for name, hence the xstrdup. */
1509 add_alias_cmd (xstrdup (alias_argv
[alias_argc
- 1]),
1510 command_argv
[command_argc
- 1],
1511 class_alias
, abbrev_flag
, c_command
->prefixlist
);
1515 /* Print the file / line number / symbol name of the location
1516 specified by SAL. */
1519 print_sal_location (const symtab_and_line
&sal
)
1521 scoped_restore_current_program_space restore_pspace
;
1522 set_current_program_space (sal
.pspace
);
1524 const char *sym_name
= NULL
;
1525 if (sal
.symbol
!= NULL
)
1526 sym_name
= SYMBOL_PRINT_NAME (sal
.symbol
);
1527 printf_filtered (_("file: \"%s\", line number: %d, symbol: \"%s\"\n"),
1528 symtab_to_filename_for_display (sal
.symtab
),
1529 sal
.line
, sym_name
!= NULL
? sym_name
: "???");
1532 /* Print a list of files and line numbers which a user may choose from
1533 in order to list a function which was specified ambiguously (as
1534 with `list classname::overloadedfuncname', for example). The SALS
1535 array provides the filenames and line numbers. FORMAT is a
1536 printf-style format string used to tell the user what was
1540 ambiguous_line_spec (gdb::array_view
<const symtab_and_line
> sals
,
1541 const char *format
, ...)
1544 va_start (ap
, format
);
1545 vprintf_filtered (format
, ap
);
1548 for (const auto &sal
: sals
)
1549 print_sal_location (sal
);
1552 /* Comparison function for filter_sals. Returns a qsort-style
1556 cmp_symtabs (const symtab_and_line
&sala
, const symtab_and_line
&salb
)
1558 const char *dira
= SYMTAB_DIRNAME (sala
.symtab
);
1559 const char *dirb
= SYMTAB_DIRNAME (salb
.symtab
);
1567 else if (dirb
== NULL
)
1574 r
= filename_cmp (dira
, dirb
);
1579 r
= filename_cmp (sala
.symtab
->filename
, salb
.symtab
->filename
);
1583 if (sala
.line
< salb
.line
)
1585 return sala
.line
== salb
.line
? 0 : 1;
1588 /* Remove any SALs that do not match the current program space, or
1589 which appear to be "file:line" duplicates. */
1592 filter_sals (std::vector
<symtab_and_line
> &sals
)
1594 /* Remove SALs that do not match. */
1595 auto from
= std::remove_if (sals
.begin (), sals
.end (),
1596 [&] (const symtab_and_line
&sal
)
1597 { return (sal
.pspace
!= current_program_space
|| sal
.symtab
== NULL
); });
1600 std::sort (sals
.begin (), from
,
1601 [] (const symtab_and_line
&sala
, const symtab_and_line
&salb
)
1602 { return cmp_symtabs (sala
, salb
) < 0; });
1604 from
= std::unique (sals
.begin (), from
,
1605 [&] (const symtab_and_line
&sala
,
1606 const symtab_and_line
&salb
)
1607 { return cmp_symtabs (sala
, salb
) == 0; });
1609 sals
.erase (from
, sals
.end ());
1613 set_debug (const char *arg
, int from_tty
)
1615 printf_unfiltered (_("\"set debug\" must be followed by "
1616 "the name of a debug subcommand.\n"));
1617 help_list (setdebuglist
, "set debug ", all_commands
, gdb_stdout
);
1621 show_debug (const char *args
, int from_tty
)
1623 cmd_show_list (showdebuglist
, from_tty
, "");
1627 init_cmd_lists (void)
1629 max_user_call_depth
= 1024;
1633 show_info_verbose (struct ui_file
*file
, int from_tty
,
1634 struct cmd_list_element
*c
,
1638 fprintf_filtered (file
,
1639 _("Verbose printing of informational messages is %s.\n"),
1642 fprintf_filtered (file
, _("Verbosity is %s.\n"), value
);
1646 show_history_expansion_p (struct ui_file
*file
, int from_tty
,
1647 struct cmd_list_element
*c
, const char *value
)
1649 fprintf_filtered (file
, _("History expansion on command input is %s.\n"),
1654 show_remote_debug (struct ui_file
*file
, int from_tty
,
1655 struct cmd_list_element
*c
, const char *value
)
1657 fprintf_filtered (file
, _("Debugging of remote protocol is %s.\n"),
1662 show_remote_timeout (struct ui_file
*file
, int from_tty
,
1663 struct cmd_list_element
*c
, const char *value
)
1665 fprintf_filtered (file
,
1666 _("Timeout limit to wait for target to respond is %s.\n"),
1671 show_max_user_call_depth (struct ui_file
*file
, int from_tty
,
1672 struct cmd_list_element
*c
, const char *value
)
1674 fprintf_filtered (file
,
1675 _("The max call depth for user-defined commands is %s.\n"),
1680 _initialize_cli_cmds (void)
1682 struct cmd_list_element
*c
;
1684 /* Define the classes of commands.
1685 They will appear in the help list in alphabetical order. */
1687 add_cmd ("internals", class_maintenance
, _("\
1688 Maintenance commands.\n\
1689 Some gdb commands are provided just for use by gdb maintainers.\n\
1690 These commands are subject to frequent change, and may not be as\n\
1691 well documented as user commands."),
1693 add_cmd ("obscure", class_obscure
, _("Obscure features."), &cmdlist
);
1694 add_cmd ("aliases", class_alias
,
1695 _("Aliases of other commands."), &cmdlist
);
1696 add_cmd ("user-defined", class_user
, _("\
1697 User-defined commands.\n\
1698 The commands in this class are those defined by the user.\n\
1699 Use the \"define\" command to define a command."), &cmdlist
);
1700 add_cmd ("support", class_support
, _("Support facilities."), &cmdlist
);
1702 add_cmd ("status", class_info
, _("Status inquiries."), &cmdlist
);
1703 add_cmd ("files", class_files
, _("Specifying and examining files."),
1705 add_cmd ("breakpoints", class_breakpoint
,
1706 _("Making program stop at certain points."), &cmdlist
);
1707 add_cmd ("data", class_vars
, _("Examining data."), &cmdlist
);
1708 add_cmd ("stack", class_stack
, _("\
1709 Examining the stack.\n\
1710 The stack is made up of stack frames. Gdb assigns numbers to stack frames\n\
1711 counting from zero for the innermost (currently executing) frame.\n\n\
1712 At any time gdb identifies one frame as the \"selected\" frame.\n\
1713 Variable lookups are done with respect to the selected frame.\n\
1714 When the program being debugged stops, gdb selects the innermost frame.\n\
1715 The commands below can be used to select other frames by number or address."),
1717 add_cmd ("running", class_run
, _("Running the program."), &cmdlist
);
1719 /* Define general commands. */
1721 add_com ("pwd", class_files
, pwd_command
, _("\
1722 Print working directory. This is used for your program as well."));
1724 c
= add_cmd ("cd", class_files
, cd_command
, _("\
1725 Set working directory to DIR for debugger.\n\
1726 The debugger's current working directory specifies where scripts and other\n\
1727 files that can be loaded by GDB are located.\n\
1728 In order to change the inferior's current working directory, the recommended\n\
1729 way is to use the \"set cwd\" command."), &cmdlist
);
1730 set_cmd_completer (c
, filename_completer
);
1732 add_com ("echo", class_support
, echo_command
, _("\
1733 Print a constant string. Give string as argument.\n\
1734 C escape sequences may be used in the argument.\n\
1735 No newline is added at the end of the argument;\n\
1736 use \"\\n\" if you want a newline to be printed.\n\
1737 Since leading and trailing whitespace are ignored in command arguments,\n\
1738 if you want to print some you must use \"\\\" before leading whitespace\n\
1739 to be printed or after trailing whitespace."));
1741 add_setshow_enum_cmd ("script-extension", class_support
,
1742 script_ext_enums
, &script_ext_mode
, _("\
1743 Set mode for script filename extension recognition."), _("\
1744 Show mode for script filename extension recognition."), _("\
1745 off == no filename extension recognition (all sourced files are GDB scripts)\n\
1746 soft == evaluate script according to filename extension, fallback to GDB script"
1748 strict == evaluate script according to filename extension, error if not supported"
1751 show_script_ext_mode
,
1752 &setlist
, &showlist
);
1754 add_com ("quit", class_support
, quit_command
, _("\
1756 Usage: quit [EXPR]\n\
1757 The optional expression EXPR, if present, is evaluated and the result\n\
1758 used as GDB's exit code. The default is zero."));
1759 c
= add_com ("help", class_support
, help_command
,
1760 _("Print list of commands."));
1761 set_cmd_completer (c
, command_completer
);
1762 add_com_alias ("q", "quit", class_support
, 1);
1763 add_com_alias ("h", "help", class_support
, 1);
1765 add_setshow_boolean_cmd ("verbose", class_support
, &info_verbose
, _("\
1766 Set verbosity."), _("\
1767 Show verbosity."), NULL
,
1770 &setlist
, &showlist
);
1772 add_prefix_cmd ("history", class_support
, set_history
,
1773 _("Generic command for setting command history parameters."),
1774 &sethistlist
, "set history ", 0, &setlist
);
1775 add_prefix_cmd ("history", class_support
, show_history
,
1776 _("Generic command for showing command history parameters."),
1777 &showhistlist
, "show history ", 0, &showlist
);
1779 add_setshow_boolean_cmd ("expansion", no_class
, &history_expansion_p
, _("\
1780 Set history expansion on command input."), _("\
1781 Show history expansion on command input."), _("\
1782 Without an argument, history expansion is enabled."),
1784 show_history_expansion_p
,
1785 &sethistlist
, &showhistlist
);
1787 add_prefix_cmd ("info", class_info
, info_command
, _("\
1788 Generic command for showing things about the program being debugged."),
1789 &infolist
, "info ", 0, &cmdlist
);
1790 add_com_alias ("i", "info", class_info
, 1);
1791 add_com_alias ("inf", "info", class_info
, 1);
1793 add_com ("complete", class_obscure
, complete_command
,
1794 _("List the completions for the rest of the line as a command."));
1796 add_prefix_cmd ("show", class_info
, show_command
, _("\
1797 Generic command for showing things about the debugger."),
1798 &showlist
, "show ", 0, &cmdlist
);
1799 /* Another way to get at the same thing. */
1800 add_info ("set", show_command
, _("Show all GDB settings."));
1802 add_cmd ("commands", no_set_class
, show_commands
, _("\
1803 Show the history of commands you typed.\n\
1804 You can supply a command number to start with, or a `+' to start after\n\
1805 the previous command number shown."),
1808 add_cmd ("version", no_set_class
, show_version
,
1809 _("Show what version of GDB this is."), &showlist
);
1811 add_cmd ("configuration", no_set_class
, show_configuration
,
1812 _("Show how GDB was configured at build time."), &showlist
);
1814 add_setshow_zinteger_cmd ("remote", no_class
, &remote_debug
, _("\
1815 Set debugging of remote protocol."), _("\
1816 Show debugging of remote protocol."), _("\
1817 When enabled, each packet sent or received with the remote target\n\
1821 &setdebuglist
, &showdebuglist
);
1823 add_setshow_zuinteger_unlimited_cmd ("remotetimeout", no_class
,
1824 &remote_timeout
, _("\
1825 Set timeout limit to wait for target to respond."), _("\
1826 Show timeout limit to wait for target to respond."), _("\
1827 This value is used to set the time limit for gdb to wait for a response\n\
1830 show_remote_timeout
,
1831 &setlist
, &showlist
);
1833 add_prefix_cmd ("debug", no_class
, set_debug
,
1834 _("Generic command for setting gdb debugging flags"),
1835 &setdebuglist
, "set debug ", 0, &setlist
);
1837 add_prefix_cmd ("debug", no_class
, show_debug
,
1838 _("Generic command for showing gdb debugging flags"),
1839 &showdebuglist
, "show debug ", 0, &showlist
);
1841 c
= add_com ("shell", class_support
, shell_command
, _("\
1842 Execute the rest of the line as a shell command.\n\
1843 With no arguments, run an inferior shell."));
1844 set_cmd_completer (c
, filename_completer
);
1846 c
= add_com ("edit", class_files
, edit_command
, _("\
1847 Edit specified file or function.\n\
1848 With no argument, edits file containing most recent line listed.\n\
1849 Editing targets can be specified in these ways:\n\
1850 FILE:LINENUM, to edit at that line in that file,\n\
1851 FUNCTION, to edit at the beginning of that function,\n\
1852 FILE:FUNCTION, to distinguish among like-named static functions.\n\
1853 *ADDRESS, to edit at the line containing that address.\n\
1854 Uses EDITOR environment variable contents as editor (or ex as default)."));
1856 c
->completer
= location_completer
;
1858 add_com ("list", class_files
, list_command
, _("\
1859 List specified function or line.\n\
1860 With no argument, lists ten more lines after or around previous listing.\n\
1861 \"list -\" lists the ten lines before a previous ten-line listing.\n\
1862 One argument specifies a line, and ten lines are listed around that line.\n\
1863 Two arguments with comma between specify starting and ending lines to list.\n\
1864 Lines can be specified in these ways:\n\
1865 LINENUM, to list around that line in current file,\n\
1866 FILE:LINENUM, to list around that line in that file,\n\
1867 FUNCTION, to list around beginning of that function,\n\
1868 FILE:FUNCTION, to distinguish among like-named static functions.\n\
1869 *ADDRESS, to list around the line containing that address.\n\
1870 With two args, if one is empty, it stands for ten lines away from\n\
1873 By default, when a single location is given, display ten lines.\n\
1874 This can be changed using \"set listsize\", and the current value\n\
1875 can be shown using \"show listsize\"."));
1877 add_com_alias ("l", "list", class_files
, 1);
1880 add_com_alias ("file", "list", class_files
, 1);
1882 c
= add_com ("disassemble", class_vars
, disassemble_command
, _("\
1883 Disassemble a specified section of memory.\n\
1884 Default is the function surrounding the pc of the selected frame.\n\
1886 With a /m modifier, source lines are included (if available).\n\
1887 This view is \"source centric\": the output is in source line order,\n\
1888 regardless of any optimization that is present. Only the main source file\n\
1889 is displayed, not those of, e.g., any inlined functions.\n\
1890 This modifier hasn't proved useful in practice and is deprecated\n\
1893 With a /s modifier, source lines are included (if available).\n\
1894 This differs from /m in two important respects:\n\
1895 - the output is still in pc address order, and\n\
1896 - file names and contents for all relevant source files are displayed.\n\
1898 With a /r modifier, raw instructions in hex are included.\n\
1900 With a single argument, the function surrounding that address is dumped.\n\
1901 Two arguments (separated by a comma) are taken as a range of memory to dump,\n\
1902 in the form of \"start,end\", or \"start,+length\".\n\
1904 Note that the address is interpreted as an expression, not as a location\n\
1905 like in the \"break\" command.\n\
1906 So, for example, if you want to disassemble function bar in file foo.c\n\
1907 you must type \"disassemble 'foo.c'::bar\" and not \"disassemble foo.c:bar\"."));
1908 set_cmd_completer (c
, location_completer
);
1910 add_com_alias ("!", "shell", class_support
, 0);
1912 c
= add_com ("make", class_support
, make_command
, _("\
1913 Run the ``make'' program using the rest of the line as arguments."));
1914 set_cmd_completer (c
, filename_completer
);
1915 add_cmd ("user", no_class
, show_user
, _("\
1916 Show definitions of non-python/scheme user defined commands.\n\
1917 Argument is the name of the user defined command.\n\
1918 With no argument, show definitions of all user defined commands."), &showlist
);
1919 add_com ("apropos", class_support
, apropos_command
,
1920 _("Search for commands matching a REGEXP"));
1922 add_setshow_uinteger_cmd ("max-user-call-depth", no_class
,
1923 &max_user_call_depth
, _("\
1924 Set the max call depth for non-python/scheme user-defined commands."), _("\
1925 Show the max call depth for non-python/scheme user-defined commands."), NULL
,
1927 show_max_user_call_depth
,
1928 &setlist
, &showlist
);
1930 add_setshow_boolean_cmd ("trace-commands", no_class
, &trace_commands
, _("\
1931 Set tracing of GDB CLI commands."), _("\
1932 Show state of GDB CLI command tracing."), _("\
1933 When 'on', each command is displayed as it is executed."),
1936 &setlist
, &showlist
);
1938 c
= add_com ("alias", class_support
, alias_command
, _("\
1939 Define a new command that is an alias of an existing command.\n\
1940 Usage: alias [-a] [--] ALIAS = COMMAND\n\
1941 ALIAS is the name of the alias command to create.\n\
1942 COMMAND is the command being aliased to.\n\
1943 If \"-a\" is specified, the command is an abbreviation,\n\
1944 and will not appear in help command list output.\n\
1947 Make \"spe\" an alias of \"set print elements\":\n\
1948 alias spe = set print elements\n\
1949 Make \"elms\" an alias of \"elements\" in the \"set print\" command:\n\
1950 alias -a set print elms = set print elements"));
1954 init_cli_cmds (void)
1956 struct cmd_list_element
*c
;
1957 char *source_help_text
;
1959 source_help_text
= xstrprintf (_("\
1960 Read commands from a file named FILE.\n\
1962 Usage: source [-s] [-v] FILE\n\
1963 -s: search for the script in the source search path,\n\
1964 even if FILE contains directories.\n\
1965 -v: each command in FILE is echoed as it is executed.\n\
1967 Note that the file \"%s\" is read automatically in this way\n\
1968 when GDB is started."), gdbinit
);
1969 c
= add_cmd ("source", class_support
, source_command
,
1970 source_help_text
, &cmdlist
);
1971 set_cmd_completer (c
, filename_completer
);