1 /* Macro definitions for GDB on an Intel i[345]86.
2 Copyright 1995, 1996, 1998, 1999, 2000, 2001
3 Free Software Foundation, Inc.
5 This file is part of GDB.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place - Suite 330,
20 Boston, MA 02111-1307, USA. */
27 /* Forward declarations for prototypes. */
29 struct frame_saved_regs
;
33 #define TARGET_BYTE_ORDER LITTLE_ENDIAN
35 /* The format used for `long double' on almost all i386 targets is the
36 i387 extended floating-point format. In fact, of all targets in the
37 GCC 2.95 tree, only OSF/1 does it different, and insists on having
38 a `long double' that's not `long' at all. */
40 #define TARGET_LONG_DOUBLE_FORMAT &floatformat_i387_ext
42 /* Although the i386 extended floating-point has only 80 significant
43 bits, a `long double' actually takes up 96, probably to enforce
46 #define TARGET_LONG_DOUBLE_BIT 96
48 /* Used for example in valprint.c:print_floating() to enable checking
51 #define IEEE_FLOAT (1)
53 /* Number of traps that happen between exec'ing the shell to run an
54 inferior, and when we finally get to the inferior code. This is 2
55 on most implementations. */
57 #define START_INFERIOR_TRAPS_EXPECTED 2
59 /* Offset from address of function to start of its code.
60 Zero on most machines. */
62 #define FUNCTION_START_OFFSET 0
64 /* Advance PC across any function entry prologue instructions to reach some
67 #define SKIP_PROLOGUE(frompc) (i386_skip_prologue (frompc))
69 extern int i386_skip_prologue (int);
71 /* Immediately after a function call, return the saved pc. Can't always go
72 through the frames for this because on some machines the new frame is not
73 set up until the new function executes some instructions. */
75 #define SAVED_PC_AFTER_CALL(frame) \
76 (read_memory_unsigned_integer (read_register (SP_REGNUM), 4))
78 /* Stack grows downward. */
80 #define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
82 /* Sequence of bytes for breakpoint instruction. */
84 #define BREAKPOINT {0xcc}
86 /* Amount PC must be decremented by after a breakpoint. This is often the
87 number of bytes in BREAKPOINT but not always. */
89 #define DECR_PC_AFTER_BREAK 1
91 /* Say how long (ordinary) registers are. This is a piece of bogosity
92 used in push_word and a few other places; REGISTER_RAW_SIZE is the
93 real way to know how big a register is. */
95 #define REGISTER_SIZE 4
97 /* This register file is parameterized by two macros:
98 HAVE_I387_REGS --- register file should include i387 registers
99 HAVE_SSE_REGS --- register file should include SSE registers
100 If HAVE_SSE_REGS is #defined, then HAVE_I387_REGS must also be #defined.
102 However, GDB code should not test those macros with #ifdef, since
103 that makes code which is annoying to multi-arch. Instead, GDB code
104 should check the values of NUM_GREGS, NUM_FREGS, and NUM_SSE_REGS,
105 which will eventually get mapped onto architecture vector entries.
107 It's okay to use the macros in tm-*.h files, though, since those
108 files will get completely replaced when we multi-arch anyway. */
110 /* Number of general registers, present on every 32-bit x86 variant. */
111 #define NUM_GREGS (16)
113 /* Number of floating-point unit registers. */
114 #ifdef HAVE_I387_REGS
115 #define NUM_FREGS (16)
117 #define NUM_FREGS (0)
120 /* Number of SSE registers. */
122 #define NUM_SSE_REGS (9)
124 #define NUM_SSE_REGS (0)
127 #define NUM_REGS (NUM_GREGS + NUM_FREGS + NUM_SSE_REGS)
129 /* Largest number of registers we could have in any configuration. */
130 #define MAX_NUM_REGS (16 + 16 + 9)
132 /* Initializer for an array of names of registers. There should be at least
133 NUM_REGS strings in this initializer. Any excess ones are simply ignored.
134 The order of the first 8 registers must match the compiler's numbering
135 scheme (which is the same as the 386 scheme) and also regmap in the various
138 #define REGISTER_NAMES { "eax", "ecx", "edx", "ebx", \
139 "esp", "ebp", "esi", "edi", \
140 "eip", "eflags", "cs", "ss", \
141 "ds", "es", "fs", "gs", \
142 "st0", "st1", "st2", "st3", \
143 "st4", "st5", "st6", "st7", \
144 "fctrl", "fstat", "ftag", "fiseg", \
145 "fioff", "foseg", "fooff", "fop", \
146 "xmm0", "xmm1", "xmm2", "xmm3", \
147 "xmm4", "xmm5", "xmm6", "xmm7", \
151 /* Register numbers of various important registers.
152 Note that some of these values are "real" register numbers,
153 and correspond to the general registers of the machine,
154 and some are "phony" register numbers which are too large
155 to be actual register numbers as far as the user is concerned
156 but do serve to get the desired values when passed to read_register. */
158 #define FP_REGNUM 5 /* (ebp) Contains address of executing stack
160 #define SP_REGNUM 4 /* (usp) Contains address of top of stack */
161 #define PC_REGNUM 8 /* (eip) Contains program counter */
162 #define PS_REGNUM 9 /* (ps) Contains processor status */
164 /* These registers are present only if HAVE_I387_REGS is #defined.
165 We promise that FP0 .. FP7 will always be consecutive register numbers. */
166 #define FP0_REGNUM 16 /* first FPU floating-point register */
167 #define FP7_REGNUM 23 /* last FPU floating-point register */
169 /* All of these control registers (except for FCOFF and FDOFF) are
170 sixteen bits long (at most) in the FPU, but are zero-extended to
171 thirty-two bits in GDB's register file. This makes it easier to
172 compute the size of the control register file, and somewhat easier
173 to convert to and from the FSAVE instruction's 32-bit format. */
174 #define FIRST_FPU_CTRL_REGNUM 24
175 #define FCTRL_REGNUM 24 /* FPU control word */
176 #define FPC_REGNUM 24 /* old name for FCTRL_REGNUM */
177 #define FSTAT_REGNUM 25 /* FPU status word */
178 #define FTAG_REGNUM 26 /* FPU register tag word */
179 #define FCS_REGNUM 27 /* FPU instruction's code segment selector
180 16 bits, called "FPU Instruction Pointer
181 Selector" in the x86 manuals */
182 #define FCOFF_REGNUM 28 /* FPU instruction's offset within segment
183 ("Fpu Code OFFset") */
184 #define FDS_REGNUM 29 /* FPU operand's data segment */
185 #define FDOFF_REGNUM 30 /* FPU operand's offset within segment */
186 #define FOP_REGNUM 31 /* FPU opcode, bottom eleven bits */
187 #define LAST_FPU_CTRL_REGNUM 31
189 /* These registers are present only if HAVE_SSE_REGS is #defined.
190 We promise that XMM0 .. XMM7 will always have consecutive reg numbers. */
191 #define XMM0_REGNUM 32 /* first SSE data register */
192 #define XMM7_REGNUM 39 /* last SSE data register */
193 #define MXCSR_REGNUM 40 /* Streaming SIMD Extension control/status */
195 #define IS_FP_REGNUM(n) (FP0_REGNUM <= (n) && (n) <= FP7_REGNUM)
196 #define IS_SSE_REGNUM(n) (XMM0_REGNUM <= (n) && (n) <= XMM7_REGNUM)
198 #define FPU_REG_RAW_SIZE (10)
200 /* Sizes of individual register sets. These cover the entire register
201 file, so summing up the sizes of those portions actually present
202 yields REGISTER_BYTES. */
203 #define SIZEOF_GREGS (NUM_GREGS * 4)
204 #define SIZEOF_FPU_REGS (8 * FPU_REG_RAW_SIZE)
205 #define SIZEOF_FPU_CTRL_REGS \
206 ((LAST_FPU_CTRL_REGNUM - FIRST_FPU_CTRL_REGNUM + 1) * 4)
207 #define SIZEOF_SSE_REGS (8 * 16 + 4)
210 /* Total amount of space needed to store our copies of the machine's register
211 state, the array `registers'. */
213 #define REGISTER_BYTES \
214 (SIZEOF_GREGS + SIZEOF_FPU_REGS + SIZEOF_FPU_CTRL_REGS + SIZEOF_SSE_REGS)
216 #ifdef HAVE_I387_REGS
217 #define REGISTER_BYTES (SIZEOF_GREGS + SIZEOF_FPU_REGS + SIZEOF_FPU_CTRL_REGS)
219 #define REGISTER_BYTES (SIZEOF_GREGS)
223 /* Index within `registers' of the first byte of the space for register N. */
224 #define REGISTER_BYTE(n) (i386_register_byte[(n)])
225 extern int i386_register_byte
[];
227 /* Number of bytes of storage in the actual machine representation for
229 #define REGISTER_RAW_SIZE(n) (i386_register_raw_size[(n)])
230 extern int i386_register_raw_size
[];
232 /* Largest value REGISTER_RAW_SIZE can have. */
233 #define MAX_REGISTER_RAW_SIZE 16
235 /* Number of bytes of storage in the program's representation
237 #define REGISTER_VIRTUAL_SIZE(n) (i386_register_virtual_size[(n)])
238 extern int i386_register_virtual_size
[];
240 /* Largest value REGISTER_VIRTUAL_SIZE can have. */
241 #define MAX_REGISTER_VIRTUAL_SIZE 16
243 /* Return the GDB type object for the "standard" data type of data in
244 register N. Perhaps si and di should go here, but potentially they
245 could be used for things other than address. */
247 #define REGISTER_VIRTUAL_TYPE(N) \
248 (((N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM) \
249 ? lookup_pointer_type (builtin_type_void) \
250 : IS_FP_REGNUM(N) ? builtin_type_long_double \
251 : IS_SSE_REGNUM(N) ? builtin_type_v4sf \
254 /* REGISTER_CONVERTIBLE(N) is true iff register N's virtual format is
255 different from its raw format. Note that this definition assumes
256 that the host supports IEEE 32-bit floats, since it doesn't say
257 that SSE registers need conversion. Even if we can't find a
258 counterexample, this is still sloppy. */
259 #define REGISTER_CONVERTIBLE(n) (IS_FP_REGNUM (n))
261 /* Convert data from raw format for register REGNUM in buffer FROM to
262 virtual format with type TYPE in buffer TO. */
264 #define REGISTER_CONVERT_TO_VIRTUAL(regnum, type, from, to) \
265 i386_register_convert_to_virtual ((regnum), (type), (from), (to))
266 extern void i386_register_convert_to_virtual (int regnum
, struct type
*type
,
267 char *from
, char *to
);
269 /* Convert data from virtual format with type TYPE in buffer FROM to
270 raw format for register REGNUM in buffer TO. */
272 #define REGISTER_CONVERT_TO_RAW(type, regnum, from, to) \
273 i386_register_convert_to_raw ((type), (regnum), (from), (to))
274 extern void i386_register_convert_to_raw (struct type
*type
, int regnum
,
275 char *from
, char *to
);
277 /* Print out the i387 floating point state. */
278 #ifdef HAVE_I387_REGS
279 extern void i387_float_info (void);
280 #define FLOAT_INFO { i387_float_info (); }
284 #define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
285 i386_push_arguments ((nargs), (args), (sp), (struct_return), (struct_addr))
286 extern CORE_ADDR
i386_push_arguments (int nargs
, struct value
**args
,
287 CORE_ADDR sp
, int struct_return
,
288 CORE_ADDR struct_addr
);
290 /* Store the address of the place in which to copy the structure the
291 subroutine will return. This is called from call_function. */
293 #define STORE_STRUCT_RETURN(addr, sp) \
294 i386_store_struct_return ((addr), (sp))
295 extern void i386_store_struct_return (CORE_ADDR addr
, CORE_ADDR sp
);
297 /* Extract from an array REGBUF containing the (raw) register state
298 a function return value of type TYPE, and copy that, in virtual format,
301 #define EXTRACT_RETURN_VALUE(type, regbuf, valbuf) \
302 i386_extract_return_value ((type), (regbuf), (valbuf))
303 extern void i386_extract_return_value (struct type
*type
, char *regbuf
,
306 /* Write into the appropriate registers a function return value stored
307 in VALBUF of type TYPE, given in virtual format. */
308 #define STORE_RETURN_VALUE(type, valbuf) \
309 i386_store_return_value ((type), (valbuf))
310 extern void i386_store_return_value (struct type
*type
, char *valbuf
);
312 /* Extract from an array REGBUF containing the (raw) register state the address
313 in which a function should return its structure value, as a CORE_ADDR (or an
314 expression that can be used as one). */
316 #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
318 /* The following redefines make backtracing through sigtramp work.
319 They manufacture a fake sigtramp frame and obtain the saved pc in sigtramp
320 from the sigcontext structure which is pushed by the kernel on the
321 user stack, along with a pointer to it. */
323 /* FRAME_CHAIN takes a frame's nominal address and produces the frame's
325 In the case of the i386, the frame's nominal address
326 is the address of a 4-byte word containing the calling frame's address. */
328 #define FRAME_CHAIN(thisframe) \
329 ((thisframe)->signal_handler_caller \
330 ? (thisframe)->frame \
331 : (!inside_entry_file ((thisframe)->pc) \
332 ? read_memory_unsigned_integer ((thisframe)->frame, 4) \
335 /* A macro that tells us whether the function invocation represented
336 by FI does not have a frame on the stack associated with it. If it
337 does not, FRAMELESS is set to 1, else 0. */
339 #define FRAMELESS_FUNCTION_INVOCATION(FI) \
340 (((FI)->signal_handler_caller) ? 0 : frameless_look_for_prologue(FI))
342 /* Saved Pc. Get it from sigcontext if within sigtramp. */
344 #define FRAME_SAVED_PC(FRAME) \
345 (((FRAME)->signal_handler_caller \
346 ? sigtramp_saved_pc (FRAME) \
347 : read_memory_unsigned_integer ((FRAME)->frame + 4, 4)) \
350 extern CORE_ADDR
sigtramp_saved_pc (struct frame_info
*);
352 #define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
354 #define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
356 /* Return number of args passed to a frame. Can return -1, meaning no way
357 to tell, which is typical now that the C compiler delays popping them. */
359 #define FRAME_NUM_ARGS(fi) (i386_frame_num_args(fi))
361 extern int i386_frame_num_args (struct frame_info
*);
363 /* Return number of bytes at start of arglist that are not really args. */
365 #define FRAME_ARGS_SKIP 8
367 /* Put here the code to store, into a struct frame_saved_regs,
368 the addresses of the saved registers of frame described by FRAME_INFO.
369 This includes special registers such as pc and fp saved in special
370 ways in the stack frame. sp is even more special:
371 the address we return for it IS the sp for the next frame. */
373 extern void i386_frame_init_saved_regs (struct frame_info
*);
374 #define FRAME_INIT_SAVED_REGS(FI) i386_frame_init_saved_regs (FI)
378 /* Things needed for making the inferior call functions. */
380 /* "An argument's size is increased, if necessary, to make it a
381 multiple of [32 bit] words. This may require tail padding,
382 depending on the size of the argument" - from the x86 ABI. */
383 #define PARM_BOUNDARY 32
385 /* Push an empty stack frame, to record the current PC, etc. */
387 #define PUSH_DUMMY_FRAME { i386_push_dummy_frame (); }
389 extern void i386_push_dummy_frame (void);
391 /* Discard from the stack the innermost frame, restoring all registers. */
393 #define POP_FRAME { i386_pop_frame (); }
395 extern void i386_pop_frame (void);
399 * call 11223344 (32 bit relative)
403 #define CALL_DUMMY { 0x223344e8, 0xcc11 }
405 #define CALL_DUMMY_LENGTH 8
407 #define CALL_DUMMY_START_OFFSET 0 /* Start execution at beginning of dummy */
409 #define CALL_DUMMY_BREAKPOINT_OFFSET 5
411 /* Insert the specified number of args and function address
412 into a call sequence of the above form stored at DUMMYNAME. */
414 #define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
415 i386_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p)
416 extern void i386_fix_call_dummy (char *dummy
, CORE_ADDR pc
, CORE_ADDR fun
,
417 int nargs
, struct value
**args
,
418 struct type
*type
, int gcc_p
);
420 /* FIXME: kettenis/2000-06-12: These do not belong here. */
421 extern void print_387_control_word (unsigned int);
422 extern void print_387_status_word (unsigned int);
424 /* Offset from SP to first arg on stack at first instruction of a function */
426 #define SP_ARG0 (1 * 4)
428 #endif /* ifndef TM_I386_H */