1 /* Low level interface to ptrace, for the remote server for GDB.
2 Copyright (C) 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
3 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
5 This file is part of GDB.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program. If not, see <http://www.gnu.org/licenses/>. */
21 #include "linux-low.h"
25 #include <sys/param.h>
26 #include <sys/ptrace.h>
28 #include <sys/ioctl.h>
34 #include <sys/syscall.h>
38 #include <sys/types.h>
44 /* Don't include <linux/elf.h> here. If it got included by gdb_proc_service.h
45 then ELFMAG0 will have been defined. If it didn't get included by
46 gdb_proc_service.h then including it will likely introduce a duplicate
47 definition of elf_fpregset_t. */
52 #define SPUFS_MAGIC 0x23c9b64e
55 #ifndef PTRACE_GETSIGINFO
56 # define PTRACE_GETSIGINFO 0x4202
57 # define PTRACE_SETSIGINFO 0x4203
64 /* If the system headers did not provide the constants, hard-code the normal
66 #ifndef PTRACE_EVENT_FORK
68 #define PTRACE_SETOPTIONS 0x4200
69 #define PTRACE_GETEVENTMSG 0x4201
71 /* options set using PTRACE_SETOPTIONS */
72 #define PTRACE_O_TRACESYSGOOD 0x00000001
73 #define PTRACE_O_TRACEFORK 0x00000002
74 #define PTRACE_O_TRACEVFORK 0x00000004
75 #define PTRACE_O_TRACECLONE 0x00000008
76 #define PTRACE_O_TRACEEXEC 0x00000010
77 #define PTRACE_O_TRACEVFORKDONE 0x00000020
78 #define PTRACE_O_TRACEEXIT 0x00000040
80 /* Wait extended result codes for the above trace options. */
81 #define PTRACE_EVENT_FORK 1
82 #define PTRACE_EVENT_VFORK 2
83 #define PTRACE_EVENT_CLONE 3
84 #define PTRACE_EVENT_EXEC 4
85 #define PTRACE_EVENT_VFORK_DONE 5
86 #define PTRACE_EVENT_EXIT 6
88 #endif /* PTRACE_EVENT_FORK */
90 /* We can't always assume that this flag is available, but all systems
91 with the ptrace event handlers also have __WALL, so it's safe to use
94 #define __WALL 0x40000000 /* Wait for any child. */
98 #define W_STOPCODE(sig) ((sig) << 8 | 0x7f)
101 /* This is the kernel's hard limit. Not to be confused with
104 #define __SIGRTMIN 32
108 #if !(defined(__UCLIBC_HAS_MMU__) || defined(__ARCH_HAS_MMU__))
113 /* ``all_threads'' is keyed by the LWP ID, which we use as the GDB protocol
114 representation of the thread ID.
116 ``all_lwps'' is keyed by the process ID - which on Linux is (presently)
117 the same as the LWP ID.
119 ``all_processes'' is keyed by the "overall process ID", which
120 GNU/Linux calls tgid, "thread group ID". */
122 struct inferior_list all_lwps
;
124 /* A list of all unknown processes which receive stop signals. Some other
125 process will presumably claim each of these as forked children
128 struct inferior_list stopped_pids
;
130 /* FIXME this is a bit of a hack, and could be removed. */
131 int stopping_threads
;
133 /* FIXME make into a target method? */
134 int using_threads
= 1;
136 /* True if we're presently stabilizing threads (moving them out of
138 static int stabilizing_threads
;
140 /* This flag is true iff we've just created or attached to our first
141 inferior but it has not stopped yet. As soon as it does, we need
142 to call the low target's arch_setup callback. Doing this only on
143 the first inferior avoids reinializing the architecture on every
144 inferior, and avoids messing with the register caches of the
145 already running inferiors. NOTE: this assumes all inferiors under
146 control of gdbserver have the same architecture. */
147 static int new_inferior
;
149 static void linux_resume_one_lwp (struct lwp_info
*lwp
,
150 int step
, int signal
, siginfo_t
*info
);
151 static void linux_resume (struct thread_resume
*resume_info
, size_t n
);
152 static void stop_all_lwps (int suspend
, struct lwp_info
*except
);
153 static void unstop_all_lwps (int unsuspend
, struct lwp_info
*except
);
154 static int linux_wait_for_event (ptid_t ptid
, int *wstat
, int options
);
155 static void *add_lwp (ptid_t ptid
);
156 static int linux_stopped_by_watchpoint (void);
157 static void mark_lwp_dead (struct lwp_info
*lwp
, int wstat
);
158 static int linux_core_of_thread (ptid_t ptid
);
159 static void proceed_all_lwps (void);
160 static int finish_step_over (struct lwp_info
*lwp
);
161 static CORE_ADDR
get_stop_pc (struct lwp_info
*lwp
);
162 static int kill_lwp (unsigned long lwpid
, int signo
);
163 static void linux_enable_event_reporting (int pid
);
165 /* True if the low target can hardware single-step. Such targets
166 don't need a BREAKPOINT_REINSERT_ADDR callback. */
169 can_hardware_single_step (void)
171 return (the_low_target
.breakpoint_reinsert_addr
== NULL
);
174 /* True if the low target supports memory breakpoints. If so, we'll
175 have a GET_PC implementation. */
178 supports_breakpoints (void)
180 return (the_low_target
.get_pc
!= NULL
);
183 /* Returns true if this target can support fast tracepoints. This
184 does not mean that the in-process agent has been loaded in the
188 supports_fast_tracepoints (void)
190 return the_low_target
.install_fast_tracepoint_jump_pad
!= NULL
;
193 struct pending_signals
197 struct pending_signals
*prev
;
200 #define PTRACE_ARG3_TYPE void *
201 #define PTRACE_ARG4_TYPE void *
202 #define PTRACE_XFER_TYPE long
204 #ifdef HAVE_LINUX_REGSETS
205 static char *disabled_regsets
;
206 static int num_regsets
;
209 /* The read/write ends of the pipe registered as waitable file in the
211 static int linux_event_pipe
[2] = { -1, -1 };
213 /* True if we're currently in async mode. */
214 #define target_is_async_p() (linux_event_pipe[0] != -1)
216 static void send_sigstop (struct lwp_info
*lwp
);
217 static void wait_for_sigstop (struct inferior_list_entry
*entry
);
219 /* Accepts an integer PID; Returns a string representing a file that
220 can be opened to get info for the child process.
221 Space for the result is malloc'd, caller must free. */
224 linux_child_pid_to_exec_file (int pid
)
228 name1
= xmalloc (MAXPATHLEN
);
229 name2
= xmalloc (MAXPATHLEN
);
230 memset (name2
, 0, MAXPATHLEN
);
232 sprintf (name1
, "/proc/%d/exe", pid
);
233 if (readlink (name1
, name2
, MAXPATHLEN
) > 0)
245 /* Return non-zero if HEADER is a 64-bit ELF file. */
248 elf_64_header_p (const Elf64_Ehdr
*header
)
250 return (header
->e_ident
[EI_MAG0
] == ELFMAG0
251 && header
->e_ident
[EI_MAG1
] == ELFMAG1
252 && header
->e_ident
[EI_MAG2
] == ELFMAG2
253 && header
->e_ident
[EI_MAG3
] == ELFMAG3
254 && header
->e_ident
[EI_CLASS
] == ELFCLASS64
);
257 /* Return non-zero if FILE is a 64-bit ELF file,
258 zero if the file is not a 64-bit ELF file,
259 and -1 if the file is not accessible or doesn't exist. */
262 elf_64_file_p (const char *file
)
267 fd
= open (file
, O_RDONLY
);
271 if (read (fd
, &header
, sizeof (header
)) != sizeof (header
))
278 return elf_64_header_p (&header
);
282 delete_lwp (struct lwp_info
*lwp
)
284 remove_thread (get_lwp_thread (lwp
));
285 remove_inferior (&all_lwps
, &lwp
->head
);
286 free (lwp
->arch_private
);
290 /* Add a process to the common process list, and set its private
293 static struct process_info
*
294 linux_add_process (int pid
, int attached
)
296 struct process_info
*proc
;
298 /* Is this the first process? If so, then set the arch. */
299 if (all_processes
.head
== NULL
)
302 proc
= add_process (pid
, attached
);
303 proc
->private = xcalloc (1, sizeof (*proc
->private));
305 if (the_low_target
.new_process
!= NULL
)
306 proc
->private->arch_private
= the_low_target
.new_process ();
311 /* Wrapper function for waitpid which handles EINTR, and emulates
312 __WALL for systems where that is not available. */
315 my_waitpid (int pid
, int *status
, int flags
)
320 fprintf (stderr
, "my_waitpid (%d, 0x%x)\n", pid
, flags
);
324 sigset_t block_mask
, org_mask
, wake_mask
;
327 wnohang
= (flags
& WNOHANG
) != 0;
328 flags
&= ~(__WALL
| __WCLONE
);
331 /* Block all signals while here. This avoids knowing about
332 LinuxThread's signals. */
333 sigfillset (&block_mask
);
334 sigprocmask (SIG_BLOCK
, &block_mask
, &org_mask
);
336 /* ... except during the sigsuspend below. */
337 sigemptyset (&wake_mask
);
341 /* Since all signals are blocked, there's no need to check
343 ret
= waitpid (pid
, status
, flags
);
346 if (ret
== -1 && out_errno
!= ECHILD
)
351 if (flags
& __WCLONE
)
353 /* We've tried both flavors now. If WNOHANG is set,
354 there's nothing else to do, just bail out. */
359 fprintf (stderr
, "blocking\n");
361 /* Block waiting for signals. */
362 sigsuspend (&wake_mask
);
368 sigprocmask (SIG_SETMASK
, &org_mask
, NULL
);
373 ret
= waitpid (pid
, status
, flags
);
374 while (ret
== -1 && errno
== EINTR
);
379 fprintf (stderr
, "my_waitpid (%d, 0x%x): status(%x), %d\n",
380 pid
, flags
, status
? *status
: -1, ret
);
386 /* Handle a GNU/Linux extended wait response. If we see a clone
387 event, we need to add the new LWP to our list (and not report the
388 trap to higher layers). */
391 handle_extended_wait (struct lwp_info
*event_child
, int wstat
)
393 int event
= wstat
>> 16;
394 struct lwp_info
*new_lwp
;
396 if (event
== PTRACE_EVENT_CLONE
)
399 unsigned long new_pid
;
400 int ret
, status
= W_STOPCODE (SIGSTOP
);
402 ptrace (PTRACE_GETEVENTMSG
, lwpid_of (event_child
), 0, &new_pid
);
404 /* If we haven't already seen the new PID stop, wait for it now. */
405 if (! pull_pid_from_list (&stopped_pids
, new_pid
))
407 /* The new child has a pending SIGSTOP. We can't affect it until it
408 hits the SIGSTOP, but we're already attached. */
410 ret
= my_waitpid (new_pid
, &status
, __WALL
);
413 perror_with_name ("waiting for new child");
414 else if (ret
!= new_pid
)
415 warning ("wait returned unexpected PID %d", ret
);
416 else if (!WIFSTOPPED (status
))
417 warning ("wait returned unexpected status 0x%x", status
);
420 linux_enable_event_reporting (new_pid
);
422 ptid
= ptid_build (pid_of (event_child
), new_pid
, 0);
423 new_lwp
= (struct lwp_info
*) add_lwp (ptid
);
424 add_thread (ptid
, new_lwp
);
426 /* Either we're going to immediately resume the new thread
427 or leave it stopped. linux_resume_one_lwp is a nop if it
428 thinks the thread is currently running, so set this first
429 before calling linux_resume_one_lwp. */
430 new_lwp
->stopped
= 1;
432 /* Normally we will get the pending SIGSTOP. But in some cases
433 we might get another signal delivered to the group first.
434 If we do get another signal, be sure not to lose it. */
435 if (WSTOPSIG (status
) == SIGSTOP
)
437 if (stopping_threads
)
438 new_lwp
->stop_pc
= get_stop_pc (new_lwp
);
440 linux_resume_one_lwp (new_lwp
, 0, 0, NULL
);
444 new_lwp
->stop_expected
= 1;
446 if (stopping_threads
)
448 new_lwp
->stop_pc
= get_stop_pc (new_lwp
);
449 new_lwp
->status_pending_p
= 1;
450 new_lwp
->status_pending
= status
;
453 /* Pass the signal on. This is what GDB does - except
454 shouldn't we really report it instead? */
455 linux_resume_one_lwp (new_lwp
, 0, WSTOPSIG (status
), NULL
);
458 /* Always resume the current thread. If we are stopping
459 threads, it will have a pending SIGSTOP; we may as well
461 linux_resume_one_lwp (event_child
, event_child
->stepping
, 0, NULL
);
465 /* Return the PC as read from the regcache of LWP, without any
469 get_pc (struct lwp_info
*lwp
)
471 struct thread_info
*saved_inferior
;
472 struct regcache
*regcache
;
475 if (the_low_target
.get_pc
== NULL
)
478 saved_inferior
= current_inferior
;
479 current_inferior
= get_lwp_thread (lwp
);
481 regcache
= get_thread_regcache (current_inferior
, 1);
482 pc
= (*the_low_target
.get_pc
) (regcache
);
485 fprintf (stderr
, "pc is 0x%lx\n", (long) pc
);
487 current_inferior
= saved_inferior
;
491 /* This function should only be called if LWP got a SIGTRAP.
492 The SIGTRAP could mean several things.
494 On i386, where decr_pc_after_break is non-zero:
495 If we were single-stepping this process using PTRACE_SINGLESTEP,
496 we will get only the one SIGTRAP (even if the instruction we
497 stepped over was a breakpoint). The value of $eip will be the
499 If we continue the process using PTRACE_CONT, we will get a
500 SIGTRAP when we hit a breakpoint. The value of $eip will be
501 the instruction after the breakpoint (i.e. needs to be
502 decremented). If we report the SIGTRAP to GDB, we must also
503 report the undecremented PC. If we cancel the SIGTRAP, we
504 must resume at the decremented PC.
506 (Presumably, not yet tested) On a non-decr_pc_after_break machine
507 with hardware or kernel single-step:
508 If we single-step over a breakpoint instruction, our PC will
509 point at the following instruction. If we continue and hit a
510 breakpoint instruction, our PC will point at the breakpoint
514 get_stop_pc (struct lwp_info
*lwp
)
518 if (the_low_target
.get_pc
== NULL
)
521 stop_pc
= get_pc (lwp
);
523 if (WSTOPSIG (lwp
->last_status
) == SIGTRAP
525 && !lwp
->stopped_by_watchpoint
526 && lwp
->last_status
>> 16 == 0)
527 stop_pc
-= the_low_target
.decr_pc_after_break
;
530 fprintf (stderr
, "stop pc is 0x%lx\n", (long) stop_pc
);
536 add_lwp (ptid_t ptid
)
538 struct lwp_info
*lwp
;
540 lwp
= (struct lwp_info
*) xmalloc (sizeof (*lwp
));
541 memset (lwp
, 0, sizeof (*lwp
));
545 if (the_low_target
.new_thread
!= NULL
)
546 lwp
->arch_private
= the_low_target
.new_thread ();
548 add_inferior_to_list (&all_lwps
, &lwp
->head
);
553 /* Start an inferior process and returns its pid.
554 ALLARGS is a vector of program-name and args. */
557 linux_create_inferior (char *program
, char **allargs
)
559 struct lwp_info
*new_lwp
;
563 #if defined(__UCLIBC__) && defined(HAS_NOMMU)
569 perror_with_name ("fork");
573 ptrace (PTRACE_TRACEME
, 0, 0, 0);
575 #ifndef __ANDROID__ /* Bionic doesn't use SIGRTMIN the way glibc does. */
576 signal (__SIGRTMIN
+ 1, SIG_DFL
);
581 execv (program
, allargs
);
583 execvp (program
, allargs
);
585 fprintf (stderr
, "Cannot exec %s: %s.\n", program
,
591 linux_add_process (pid
, 0);
593 ptid
= ptid_build (pid
, pid
, 0);
594 new_lwp
= add_lwp (ptid
);
595 add_thread (ptid
, new_lwp
);
596 new_lwp
->must_set_ptrace_flags
= 1;
601 /* Attach to an inferior process. */
604 linux_attach_lwp_1 (unsigned long lwpid
, int initial
)
607 struct lwp_info
*new_lwp
;
609 if (ptrace (PTRACE_ATTACH
, lwpid
, 0, 0) != 0)
613 /* If we fail to attach to an LWP, just warn. */
614 fprintf (stderr
, "Cannot attach to lwp %ld: %s (%d)\n", lwpid
,
615 strerror (errno
), errno
);
620 /* If we fail to attach to a process, report an error. */
621 error ("Cannot attach to lwp %ld: %s (%d)\n", lwpid
,
622 strerror (errno
), errno
);
626 /* NOTE/FIXME: This lwp might have not been the tgid. */
627 ptid
= ptid_build (lwpid
, lwpid
, 0);
630 /* Note that extracting the pid from the current inferior is
631 safe, since we're always called in the context of the same
632 process as this new thread. */
633 int pid
= pid_of (get_thread_lwp (current_inferior
));
634 ptid
= ptid_build (pid
, lwpid
, 0);
637 new_lwp
= (struct lwp_info
*) add_lwp (ptid
);
638 add_thread (ptid
, new_lwp
);
640 /* We need to wait for SIGSTOP before being able to make the next
641 ptrace call on this LWP. */
642 new_lwp
->must_set_ptrace_flags
= 1;
644 /* The next time we wait for this LWP we'll see a SIGSTOP as PTRACE_ATTACH
647 There are several cases to consider here:
649 1) gdbserver has already attached to the process and is being notified
650 of a new thread that is being created.
651 In this case we should ignore that SIGSTOP and resume the
652 process. This is handled below by setting stop_expected = 1,
653 and the fact that add_thread sets last_resume_kind ==
656 2) This is the first thread (the process thread), and we're attaching
657 to it via attach_inferior.
658 In this case we want the process thread to stop.
659 This is handled by having linux_attach set last_resume_kind ==
660 resume_stop after we return.
661 ??? If the process already has several threads we leave the other
664 3) GDB is connecting to gdbserver and is requesting an enumeration of all
666 In this case we want the thread to stop.
667 FIXME: This case is currently not properly handled.
668 We should wait for the SIGSTOP but don't. Things work apparently
669 because enough time passes between when we ptrace (ATTACH) and when
670 gdb makes the next ptrace call on the thread.
672 On the other hand, if we are currently trying to stop all threads, we
673 should treat the new thread as if we had sent it a SIGSTOP. This works
674 because we are guaranteed that the add_lwp call above added us to the
675 end of the list, and so the new thread has not yet reached
676 wait_for_sigstop (but will). */
677 new_lwp
->stop_expected
= 1;
681 linux_attach_lwp (unsigned long lwpid
)
683 linux_attach_lwp_1 (lwpid
, 0);
687 linux_attach (unsigned long pid
)
689 linux_attach_lwp_1 (pid
, 1);
690 linux_add_process (pid
, 1);
694 struct thread_info
*thread
;
696 /* Don't ignore the initial SIGSTOP if we just attached to this
697 process. It will be collected by wait shortly. */
698 thread
= find_thread_ptid (ptid_build (pid
, pid
, 0));
699 thread
->last_resume_kind
= resume_stop
;
712 second_thread_of_pid_p (struct inferior_list_entry
*entry
, void *args
)
714 struct counter
*counter
= args
;
716 if (ptid_get_pid (entry
->id
) == counter
->pid
)
718 if (++counter
->count
> 1)
726 last_thread_of_process_p (struct thread_info
*thread
)
728 ptid_t ptid
= ((struct inferior_list_entry
*)thread
)->id
;
729 int pid
= ptid_get_pid (ptid
);
730 struct counter counter
= { pid
, 0 };
732 return (find_inferior (&all_threads
,
733 second_thread_of_pid_p
, &counter
) == NULL
);
736 /* Kill the inferior lwp. */
739 linux_kill_one_lwp (struct inferior_list_entry
*entry
, void *args
)
741 struct thread_info
*thread
= (struct thread_info
*) entry
;
742 struct lwp_info
*lwp
= get_thread_lwp (thread
);
744 int pid
= * (int *) args
;
746 if (ptid_get_pid (entry
->id
) != pid
)
749 /* We avoid killing the first thread here, because of a Linux kernel (at
750 least 2.6.0-test7 through 2.6.8-rc4) bug; if we kill the parent before
751 the children get a chance to be reaped, it will remain a zombie
754 if (lwpid_of (lwp
) == pid
)
757 fprintf (stderr
, "lkop: is last of process %s\n",
758 target_pid_to_str (entry
->id
));
764 ptrace (PTRACE_KILL
, lwpid_of (lwp
), 0, 0);
766 /* Make sure it died. The loop is most likely unnecessary. */
767 pid
= linux_wait_for_event (lwp
->head
.id
, &wstat
, __WALL
);
768 } while (pid
> 0 && WIFSTOPPED (wstat
));
776 struct process_info
*process
;
777 struct lwp_info
*lwp
;
778 struct thread_info
*thread
;
782 process
= find_process_pid (pid
);
786 /* If we're killing a running inferior, make sure it is stopped
787 first, as PTRACE_KILL will not work otherwise. */
788 stop_all_lwps (0, NULL
);
790 find_inferior (&all_threads
, linux_kill_one_lwp
, &pid
);
792 /* See the comment in linux_kill_one_lwp. We did not kill the first
793 thread in the list, so do so now. */
794 lwp
= find_lwp_pid (pid_to_ptid (pid
));
795 thread
= get_lwp_thread (lwp
);
798 fprintf (stderr
, "lk_1: killing lwp %ld, for pid: %d\n",
799 lwpid_of (lwp
), pid
);
803 ptrace (PTRACE_KILL
, lwpid_of (lwp
), 0, 0);
805 /* Make sure it died. The loop is most likely unnecessary. */
806 lwpid
= linux_wait_for_event (lwp
->head
.id
, &wstat
, __WALL
);
807 } while (lwpid
> 0 && WIFSTOPPED (wstat
));
809 the_target
->mourn (process
);
811 /* Since we presently can only stop all lwps of all processes, we
812 need to unstop lwps of other processes. */
813 unstop_all_lwps (0, NULL
);
818 linux_detach_one_lwp (struct inferior_list_entry
*entry
, void *args
)
820 struct thread_info
*thread
= (struct thread_info
*) entry
;
821 struct lwp_info
*lwp
= get_thread_lwp (thread
);
822 int pid
= * (int *) args
;
824 if (ptid_get_pid (entry
->id
) != pid
)
827 /* If this process is stopped but is expecting a SIGSTOP, then make
828 sure we take care of that now. This isn't absolutely guaranteed
829 to collect the SIGSTOP, but is fairly likely to. */
830 if (lwp
->stop_expected
)
833 /* Clear stop_expected, so that the SIGSTOP will be reported. */
834 lwp
->stop_expected
= 0;
835 linux_resume_one_lwp (lwp
, 0, 0, NULL
);
836 linux_wait_for_event (lwp
->head
.id
, &wstat
, __WALL
);
839 /* Flush any pending changes to the process's registers. */
840 regcache_invalidate_one ((struct inferior_list_entry
*)
841 get_lwp_thread (lwp
));
843 /* Finally, let it resume. */
844 ptrace (PTRACE_DETACH
, lwpid_of (lwp
), 0, 0);
851 linux_detach (int pid
)
853 struct process_info
*process
;
855 process
= find_process_pid (pid
);
859 /* Stop all threads before detaching. First, ptrace requires that
860 the thread is stopped to sucessfully detach. Second, thread_db
861 may need to uninstall thread event breakpoints from memory, which
862 only works with a stopped process anyway. */
863 stop_all_lwps (0, NULL
);
866 thread_db_detach (process
);
869 /* Stabilize threads (move out of jump pads). */
870 stabilize_threads ();
872 find_inferior (&all_threads
, linux_detach_one_lwp
, &pid
);
874 the_target
->mourn (process
);
876 /* Since we presently can only stop all lwps of all processes, we
877 need to unstop lwps of other processes. */
878 unstop_all_lwps (0, NULL
);
882 /* Remove all LWPs that belong to process PROC from the lwp list. */
885 delete_lwp_callback (struct inferior_list_entry
*entry
, void *proc
)
887 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
888 struct process_info
*process
= proc
;
890 if (pid_of (lwp
) == pid_of (process
))
897 linux_mourn (struct process_info
*process
)
899 struct process_info_private
*priv
;
902 thread_db_mourn (process
);
905 find_inferior (&all_lwps
, delete_lwp_callback
, process
);
907 /* Freeing all private data. */
908 priv
= process
->private;
909 free (priv
->arch_private
);
911 process
->private = NULL
;
913 remove_process (process
);
920 struct process_info
*process
;
922 process
= find_process_pid (pid
);
927 ret
= my_waitpid (pid
, &status
, 0);
928 if (WIFEXITED (status
) || WIFSIGNALED (status
))
930 } while (ret
!= -1 || errno
!= ECHILD
);
933 /* Return nonzero if the given thread is still alive. */
935 linux_thread_alive (ptid_t ptid
)
937 struct lwp_info
*lwp
= find_lwp_pid (ptid
);
939 /* We assume we always know if a thread exits. If a whole process
940 exited but we still haven't been able to report it to GDB, we'll
941 hold on to the last lwp of the dead process. */
948 /* Return 1 if this lwp has an interesting status pending. */
950 status_pending_p_callback (struct inferior_list_entry
*entry
, void *arg
)
952 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
953 ptid_t ptid
= * (ptid_t
*) arg
;
954 struct thread_info
*thread
;
956 /* Check if we're only interested in events from a specific process
958 if (!ptid_equal (minus_one_ptid
, ptid
)
959 && ptid_get_pid (ptid
) != ptid_get_pid (lwp
->head
.id
))
962 thread
= get_lwp_thread (lwp
);
964 /* If we got a `vCont;t', but we haven't reported a stop yet, do
965 report any status pending the LWP may have. */
966 if (thread
->last_resume_kind
== resume_stop
967 && thread
->last_status
.kind
!= TARGET_WAITKIND_IGNORE
)
970 return lwp
->status_pending_p
;
974 same_lwp (struct inferior_list_entry
*entry
, void *data
)
976 ptid_t ptid
= *(ptid_t
*) data
;
979 if (ptid_get_lwp (ptid
) != 0)
980 lwp
= ptid_get_lwp (ptid
);
982 lwp
= ptid_get_pid (ptid
);
984 if (ptid_get_lwp (entry
->id
) == lwp
)
991 find_lwp_pid (ptid_t ptid
)
993 return (struct lwp_info
*) find_inferior (&all_lwps
, same_lwp
, &ptid
);
996 static struct lwp_info
*
997 linux_wait_for_lwp (ptid_t ptid
, int *wstatp
, int options
)
1000 int to_wait_for
= -1;
1001 struct lwp_info
*child
= NULL
;
1004 fprintf (stderr
, "linux_wait_for_lwp: %s\n", target_pid_to_str (ptid
));
1006 if (ptid_equal (ptid
, minus_one_ptid
))
1007 to_wait_for
= -1; /* any child */
1009 to_wait_for
= ptid_get_lwp (ptid
); /* this lwp only */
1015 ret
= my_waitpid (to_wait_for
, wstatp
, options
);
1016 if (ret
== 0 || (ret
== -1 && errno
== ECHILD
&& (options
& WNOHANG
)))
1019 perror_with_name ("waitpid");
1022 && (!WIFSTOPPED (*wstatp
)
1023 || (WSTOPSIG (*wstatp
) != 32
1024 && WSTOPSIG (*wstatp
) != 33)))
1025 fprintf (stderr
, "Got an event from %d (%x)\n", ret
, *wstatp
);
1027 child
= find_lwp_pid (pid_to_ptid (ret
));
1029 /* If we didn't find a process, one of two things presumably happened:
1030 - A process we started and then detached from has exited. Ignore it.
1031 - A process we are controlling has forked and the new child's stop
1032 was reported to us by the kernel. Save its PID. */
1033 if (child
== NULL
&& WIFSTOPPED (*wstatp
))
1035 add_pid_to_list (&stopped_pids
, ret
);
1038 else if (child
== NULL
)
1043 child
->last_status
= *wstatp
;
1045 /* Architecture-specific setup after inferior is running.
1046 This needs to happen after we have attached to the inferior
1047 and it is stopped for the first time, but before we access
1048 any inferior registers. */
1051 the_low_target
.arch_setup ();
1052 #ifdef HAVE_LINUX_REGSETS
1053 memset (disabled_regsets
, 0, num_regsets
);
1058 /* Fetch the possibly triggered data watchpoint info and store it in
1061 On some archs, like x86, that use debug registers to set
1062 watchpoints, it's possible that the way to know which watched
1063 address trapped, is to check the register that is used to select
1064 which address to watch. Problem is, between setting the
1065 watchpoint and reading back which data address trapped, the user
1066 may change the set of watchpoints, and, as a consequence, GDB
1067 changes the debug registers in the inferior. To avoid reading
1068 back a stale stopped-data-address when that happens, we cache in
1069 LP the fact that a watchpoint trapped, and the corresponding data
1070 address, as soon as we see CHILD stop with a SIGTRAP. If GDB
1071 changes the debug registers meanwhile, we have the cached data we
1074 if (WIFSTOPPED (*wstatp
) && WSTOPSIG (*wstatp
) == SIGTRAP
)
1076 if (the_low_target
.stopped_by_watchpoint
== NULL
)
1078 child
->stopped_by_watchpoint
= 0;
1082 struct thread_info
*saved_inferior
;
1084 saved_inferior
= current_inferior
;
1085 current_inferior
= get_lwp_thread (child
);
1087 child
->stopped_by_watchpoint
1088 = the_low_target
.stopped_by_watchpoint ();
1090 if (child
->stopped_by_watchpoint
)
1092 if (the_low_target
.stopped_data_address
!= NULL
)
1093 child
->stopped_data_address
1094 = the_low_target
.stopped_data_address ();
1096 child
->stopped_data_address
= 0;
1099 current_inferior
= saved_inferior
;
1103 /* Store the STOP_PC, with adjustment applied. This depends on the
1104 architecture being defined already (so that CHILD has a valid
1105 regcache), and on LAST_STATUS being set (to check for SIGTRAP or
1107 if (WIFSTOPPED (*wstatp
))
1108 child
->stop_pc
= get_stop_pc (child
);
1111 && WIFSTOPPED (*wstatp
)
1112 && the_low_target
.get_pc
!= NULL
)
1114 struct thread_info
*saved_inferior
= current_inferior
;
1115 struct regcache
*regcache
;
1118 current_inferior
= get_lwp_thread (child
);
1119 regcache
= get_thread_regcache (current_inferior
, 1);
1120 pc
= (*the_low_target
.get_pc
) (regcache
);
1121 fprintf (stderr
, "linux_wait_for_lwp: pc is 0x%lx\n", (long) pc
);
1122 current_inferior
= saved_inferior
;
1128 /* This function should only be called if the LWP got a SIGTRAP.
1130 Handle any tracepoint steps or hits. Return true if a tracepoint
1131 event was handled, 0 otherwise. */
1134 handle_tracepoints (struct lwp_info
*lwp
)
1136 struct thread_info
*tinfo
= get_lwp_thread (lwp
);
1137 int tpoint_related_event
= 0;
1139 /* If this tracepoint hit causes a tracing stop, we'll immediately
1140 uninsert tracepoints. To do this, we temporarily pause all
1141 threads, unpatch away, and then unpause threads. We need to make
1142 sure the unpausing doesn't resume LWP too. */
1145 /* And we need to be sure that any all-threads-stopping doesn't try
1146 to move threads out of the jump pads, as it could deadlock the
1147 inferior (LWP could be in the jump pad, maybe even holding the
1150 /* Do any necessary step collect actions. */
1151 tpoint_related_event
|= tracepoint_finished_step (tinfo
, lwp
->stop_pc
);
1153 tpoint_related_event
|= handle_tracepoint_bkpts (tinfo
, lwp
->stop_pc
);
1155 /* See if we just hit a tracepoint and do its main collect
1157 tpoint_related_event
|= tracepoint_was_hit (tinfo
, lwp
->stop_pc
);
1161 gdb_assert (lwp
->suspended
== 0);
1162 gdb_assert (!stabilizing_threads
|| lwp
->collecting_fast_tracepoint
);
1164 if (tpoint_related_event
)
1167 fprintf (stderr
, "got a tracepoint event\n");
1174 /* Convenience wrapper. Returns true if LWP is presently collecting a
1178 linux_fast_tracepoint_collecting (struct lwp_info
*lwp
,
1179 struct fast_tpoint_collect_status
*status
)
1181 CORE_ADDR thread_area
;
1183 if (the_low_target
.get_thread_area
== NULL
)
1186 /* Get the thread area address. This is used to recognize which
1187 thread is which when tracing with the in-process agent library.
1188 We don't read anything from the address, and treat it as opaque;
1189 it's the address itself that we assume is unique per-thread. */
1190 if ((*the_low_target
.get_thread_area
) (lwpid_of (lwp
), &thread_area
) == -1)
1193 return fast_tracepoint_collecting (thread_area
, lwp
->stop_pc
, status
);
1196 /* The reason we resume in the caller, is because we want to be able
1197 to pass lwp->status_pending as WSTAT, and we need to clear
1198 status_pending_p before resuming, otherwise, linux_resume_one_lwp
1199 refuses to resume. */
1202 maybe_move_out_of_jump_pad (struct lwp_info
*lwp
, int *wstat
)
1204 struct thread_info
*saved_inferior
;
1206 saved_inferior
= current_inferior
;
1207 current_inferior
= get_lwp_thread (lwp
);
1210 || (WIFSTOPPED (*wstat
) && WSTOPSIG (*wstat
) != SIGTRAP
))
1211 && supports_fast_tracepoints ()
1212 && in_process_agent_loaded ())
1214 struct fast_tpoint_collect_status status
;
1219 Checking whether LWP %ld needs to move out of the jump pad.\n",
1222 r
= linux_fast_tracepoint_collecting (lwp
, &status
);
1225 || (WSTOPSIG (*wstat
) != SIGILL
1226 && WSTOPSIG (*wstat
) != SIGFPE
1227 && WSTOPSIG (*wstat
) != SIGSEGV
1228 && WSTOPSIG (*wstat
) != SIGBUS
))
1230 lwp
->collecting_fast_tracepoint
= r
;
1234 if (r
== 1 && lwp
->exit_jump_pad_bkpt
== NULL
)
1236 /* Haven't executed the original instruction yet.
1237 Set breakpoint there, and wait till it's hit,
1238 then single-step until exiting the jump pad. */
1239 lwp
->exit_jump_pad_bkpt
1240 = set_breakpoint_at (status
.adjusted_insn_addr
, NULL
);
1245 Checking whether LWP %ld needs to move out of the jump pad...it does\n",
1253 /* If we get a synchronous signal while collecting, *and*
1254 while executing the (relocated) original instruction,
1255 reset the PC to point at the tpoint address, before
1256 reporting to GDB. Otherwise, it's an IPA lib bug: just
1257 report the signal to GDB, and pray for the best. */
1259 lwp
->collecting_fast_tracepoint
= 0;
1262 && (status
.adjusted_insn_addr
<= lwp
->stop_pc
1263 && lwp
->stop_pc
< status
.adjusted_insn_addr_end
))
1266 struct regcache
*regcache
;
1268 /* The si_addr on a few signals references the address
1269 of the faulting instruction. Adjust that as
1271 if ((WSTOPSIG (*wstat
) == SIGILL
1272 || WSTOPSIG (*wstat
) == SIGFPE
1273 || WSTOPSIG (*wstat
) == SIGBUS
1274 || WSTOPSIG (*wstat
) == SIGSEGV
)
1275 && ptrace (PTRACE_GETSIGINFO
, lwpid_of (lwp
), 0, &info
) == 0
1276 /* Final check just to make sure we don't clobber
1277 the siginfo of non-kernel-sent signals. */
1278 && (uintptr_t) info
.si_addr
== lwp
->stop_pc
)
1280 info
.si_addr
= (void *) (uintptr_t) status
.tpoint_addr
;
1281 ptrace (PTRACE_SETSIGINFO
, lwpid_of (lwp
), 0, &info
);
1284 regcache
= get_thread_regcache (get_lwp_thread (lwp
), 1);
1285 (*the_low_target
.set_pc
) (regcache
, status
.tpoint_addr
);
1286 lwp
->stop_pc
= status
.tpoint_addr
;
1288 /* Cancel any fast tracepoint lock this thread was
1290 force_unlock_trace_buffer ();
1293 if (lwp
->exit_jump_pad_bkpt
!= NULL
)
1297 "Cancelling fast exit-jump-pad: removing bkpt. "
1298 "stopping all threads momentarily.\n");
1300 stop_all_lwps (1, lwp
);
1301 cancel_breakpoints ();
1303 delete_breakpoint (lwp
->exit_jump_pad_bkpt
);
1304 lwp
->exit_jump_pad_bkpt
= NULL
;
1306 unstop_all_lwps (1, lwp
);
1308 gdb_assert (lwp
->suspended
>= 0);
1315 Checking whether LWP %ld needs to move out of the jump pad...no\n",
1320 /* Enqueue one signal in the "signals to report later when out of the
1324 enqueue_one_deferred_signal (struct lwp_info
*lwp
, int *wstat
)
1326 struct pending_signals
*p_sig
;
1330 Deferring signal %d for LWP %ld.\n", WSTOPSIG (*wstat
), lwpid_of (lwp
));
1334 struct pending_signals
*sig
;
1336 for (sig
= lwp
->pending_signals_to_report
;
1340 " Already queued %d\n",
1343 fprintf (stderr
, " (no more currently queued signals)\n");
1346 /* Don't enqueue non-RT signals if they are already in the deferred
1347 queue. (SIGSTOP being the easiest signal to see ending up here
1349 if (WSTOPSIG (*wstat
) < __SIGRTMIN
)
1351 struct pending_signals
*sig
;
1353 for (sig
= lwp
->pending_signals_to_report
;
1357 if (sig
->signal
== WSTOPSIG (*wstat
))
1361 "Not requeuing already queued non-RT signal %d"
1370 p_sig
= xmalloc (sizeof (*p_sig
));
1371 p_sig
->prev
= lwp
->pending_signals_to_report
;
1372 p_sig
->signal
= WSTOPSIG (*wstat
);
1373 memset (&p_sig
->info
, 0, sizeof (siginfo_t
));
1374 ptrace (PTRACE_GETSIGINFO
, lwpid_of (lwp
), 0, &p_sig
->info
);
1376 lwp
->pending_signals_to_report
= p_sig
;
1379 /* Dequeue one signal from the "signals to report later when out of
1380 the jump pad" list. */
1383 dequeue_one_deferred_signal (struct lwp_info
*lwp
, int *wstat
)
1385 if (lwp
->pending_signals_to_report
!= NULL
)
1387 struct pending_signals
**p_sig
;
1389 p_sig
= &lwp
->pending_signals_to_report
;
1390 while ((*p_sig
)->prev
!= NULL
)
1391 p_sig
= &(*p_sig
)->prev
;
1393 *wstat
= W_STOPCODE ((*p_sig
)->signal
);
1394 if ((*p_sig
)->info
.si_signo
!= 0)
1395 ptrace (PTRACE_SETSIGINFO
, lwpid_of (lwp
), 0, &(*p_sig
)->info
);
1400 fprintf (stderr
, "Reporting deferred signal %d for LWP %ld.\n",
1401 WSTOPSIG (*wstat
), lwpid_of (lwp
));
1405 struct pending_signals
*sig
;
1407 for (sig
= lwp
->pending_signals_to_report
;
1411 " Still queued %d\n",
1414 fprintf (stderr
, " (no more queued signals)\n");
1423 /* Arrange for a breakpoint to be hit again later. We don't keep the
1424 SIGTRAP status and don't forward the SIGTRAP signal to the LWP. We
1425 will handle the current event, eventually we will resume this LWP,
1426 and this breakpoint will trap again. */
1429 cancel_breakpoint (struct lwp_info
*lwp
)
1431 struct thread_info
*saved_inferior
;
1433 /* There's nothing to do if we don't support breakpoints. */
1434 if (!supports_breakpoints ())
1437 /* breakpoint_at reads from current inferior. */
1438 saved_inferior
= current_inferior
;
1439 current_inferior
= get_lwp_thread (lwp
);
1441 if ((*the_low_target
.breakpoint_at
) (lwp
->stop_pc
))
1445 "CB: Push back breakpoint for %s\n",
1446 target_pid_to_str (ptid_of (lwp
)));
1448 /* Back up the PC if necessary. */
1449 if (the_low_target
.decr_pc_after_break
)
1451 struct regcache
*regcache
1452 = get_thread_regcache (current_inferior
, 1);
1453 (*the_low_target
.set_pc
) (regcache
, lwp
->stop_pc
);
1456 current_inferior
= saved_inferior
;
1463 "CB: No breakpoint found at %s for [%s]\n",
1464 paddress (lwp
->stop_pc
),
1465 target_pid_to_str (ptid_of (lwp
)));
1468 current_inferior
= saved_inferior
;
1472 /* When the event-loop is doing a step-over, this points at the thread
1474 ptid_t step_over_bkpt
;
1476 /* Wait for an event from child PID. If PID is -1, wait for any
1477 child. Store the stop status through the status pointer WSTAT.
1478 OPTIONS is passed to the waitpid call. Return 0 if no child stop
1479 event was found and OPTIONS contains WNOHANG. Return the PID of
1480 the stopped child otherwise. */
1483 linux_wait_for_event_1 (ptid_t ptid
, int *wstat
, int options
)
1485 struct lwp_info
*event_child
, *requested_child
;
1488 requested_child
= NULL
;
1490 /* Check for a lwp with a pending status. */
1492 if (ptid_equal (ptid
, minus_one_ptid
)
1493 || ptid_equal (pid_to_ptid (ptid_get_pid (ptid
)), ptid
))
1495 event_child
= (struct lwp_info
*)
1496 find_inferior (&all_lwps
, status_pending_p_callback
, &ptid
);
1497 if (debug_threads
&& event_child
)
1498 fprintf (stderr
, "Got a pending child %ld\n", lwpid_of (event_child
));
1502 requested_child
= find_lwp_pid (ptid
);
1504 if (!stopping_threads
1505 && requested_child
->status_pending_p
1506 && requested_child
->collecting_fast_tracepoint
)
1508 enqueue_one_deferred_signal (requested_child
,
1509 &requested_child
->status_pending
);
1510 requested_child
->status_pending_p
= 0;
1511 requested_child
->status_pending
= 0;
1512 linux_resume_one_lwp (requested_child
, 0, 0, NULL
);
1515 if (requested_child
->suspended
1516 && requested_child
->status_pending_p
)
1517 fatal ("requesting an event out of a suspended child?");
1519 if (requested_child
->status_pending_p
)
1520 event_child
= requested_child
;
1523 if (event_child
!= NULL
)
1526 fprintf (stderr
, "Got an event from pending child %ld (%04x)\n",
1527 lwpid_of (event_child
), event_child
->status_pending
);
1528 *wstat
= event_child
->status_pending
;
1529 event_child
->status_pending_p
= 0;
1530 event_child
->status_pending
= 0;
1531 current_inferior
= get_lwp_thread (event_child
);
1532 return lwpid_of (event_child
);
1535 /* We only enter this loop if no process has a pending wait status. Thus
1536 any action taken in response to a wait status inside this loop is
1537 responding as soon as we detect the status, not after any pending
1541 event_child
= linux_wait_for_lwp (ptid
, wstat
, options
);
1543 if ((options
& WNOHANG
) && event_child
== NULL
)
1546 fprintf (stderr
, "WNOHANG set, no event found\n");
1550 if (event_child
== NULL
)
1551 error ("event from unknown child");
1553 current_inferior
= get_lwp_thread (event_child
);
1555 /* Check for thread exit. */
1556 if (! WIFSTOPPED (*wstat
))
1559 fprintf (stderr
, "LWP %ld exiting\n", lwpid_of (event_child
));
1561 /* If the last thread is exiting, just return. */
1562 if (last_thread_of_process_p (current_inferior
))
1565 fprintf (stderr
, "LWP %ld is last lwp of process\n",
1566 lwpid_of (event_child
));
1567 return lwpid_of (event_child
);
1572 current_inferior
= (struct thread_info
*) all_threads
.head
;
1574 fprintf (stderr
, "Current inferior is now %ld\n",
1575 lwpid_of (get_thread_lwp (current_inferior
)));
1579 current_inferior
= NULL
;
1581 fprintf (stderr
, "Current inferior is now <NULL>\n");
1584 /* If we were waiting for this particular child to do something...
1585 well, it did something. */
1586 if (requested_child
!= NULL
)
1588 int lwpid
= lwpid_of (event_child
);
1590 /* Cancel the step-over operation --- the thread that
1591 started it is gone. */
1592 if (finish_step_over (event_child
))
1593 unstop_all_lwps (1, event_child
);
1594 delete_lwp (event_child
);
1598 delete_lwp (event_child
);
1600 /* Wait for a more interesting event. */
1604 if (event_child
->must_set_ptrace_flags
)
1606 linux_enable_event_reporting (lwpid_of (event_child
));
1607 event_child
->must_set_ptrace_flags
= 0;
1610 if (WIFSTOPPED (*wstat
) && WSTOPSIG (*wstat
) == SIGTRAP
1611 && *wstat
>> 16 != 0)
1613 handle_extended_wait (event_child
, *wstat
);
1617 if (WIFSTOPPED (*wstat
)
1618 && WSTOPSIG (*wstat
) == SIGSTOP
1619 && event_child
->stop_expected
)
1624 fprintf (stderr
, "Expected stop.\n");
1625 event_child
->stop_expected
= 0;
1627 should_stop
= (current_inferior
->last_resume_kind
== resume_stop
1628 || stopping_threads
);
1632 linux_resume_one_lwp (event_child
,
1633 event_child
->stepping
, 0, NULL
);
1638 return lwpid_of (event_child
);
1646 linux_wait_for_event (ptid_t ptid
, int *wstat
, int options
)
1650 if (ptid_is_pid (ptid
))
1652 /* A request to wait for a specific tgid. This is not possible
1653 with waitpid, so instead, we wait for any child, and leave
1654 children we're not interested in right now with a pending
1655 status to report later. */
1656 wait_ptid
= minus_one_ptid
;
1665 event_pid
= linux_wait_for_event_1 (wait_ptid
, wstat
, options
);
1668 && ptid_is_pid (ptid
) && ptid_get_pid (ptid
) != event_pid
)
1670 struct lwp_info
*event_child
= find_lwp_pid (pid_to_ptid (event_pid
));
1672 if (! WIFSTOPPED (*wstat
))
1673 mark_lwp_dead (event_child
, *wstat
);
1676 event_child
->status_pending_p
= 1;
1677 event_child
->status_pending
= *wstat
;
1686 /* Count the LWP's that have had events. */
1689 count_events_callback (struct inferior_list_entry
*entry
, void *data
)
1691 struct lwp_info
*lp
= (struct lwp_info
*) entry
;
1692 struct thread_info
*thread
= get_lwp_thread (lp
);
1695 gdb_assert (count
!= NULL
);
1697 /* Count only resumed LWPs that have a SIGTRAP event pending that
1698 should be reported to GDB. */
1699 if (thread
->last_status
.kind
== TARGET_WAITKIND_IGNORE
1700 && thread
->last_resume_kind
!= resume_stop
1701 && lp
->status_pending_p
1702 && WIFSTOPPED (lp
->status_pending
)
1703 && WSTOPSIG (lp
->status_pending
) == SIGTRAP
1704 && !breakpoint_inserted_here (lp
->stop_pc
))
1710 /* Select the LWP (if any) that is currently being single-stepped. */
1713 select_singlestep_lwp_callback (struct inferior_list_entry
*entry
, void *data
)
1715 struct lwp_info
*lp
= (struct lwp_info
*) entry
;
1716 struct thread_info
*thread
= get_lwp_thread (lp
);
1718 if (thread
->last_status
.kind
== TARGET_WAITKIND_IGNORE
1719 && thread
->last_resume_kind
== resume_step
1720 && lp
->status_pending_p
)
1726 /* Select the Nth LWP that has had a SIGTRAP event that should be
1730 select_event_lwp_callback (struct inferior_list_entry
*entry
, void *data
)
1732 struct lwp_info
*lp
= (struct lwp_info
*) entry
;
1733 struct thread_info
*thread
= get_lwp_thread (lp
);
1734 int *selector
= data
;
1736 gdb_assert (selector
!= NULL
);
1738 /* Select only resumed LWPs that have a SIGTRAP event pending. */
1739 if (thread
->last_resume_kind
!= resume_stop
1740 && thread
->last_status
.kind
== TARGET_WAITKIND_IGNORE
1741 && lp
->status_pending_p
1742 && WIFSTOPPED (lp
->status_pending
)
1743 && WSTOPSIG (lp
->status_pending
) == SIGTRAP
1744 && !breakpoint_inserted_here (lp
->stop_pc
))
1745 if ((*selector
)-- == 0)
1752 cancel_breakpoints_callback (struct inferior_list_entry
*entry
, void *data
)
1754 struct lwp_info
*lp
= (struct lwp_info
*) entry
;
1755 struct thread_info
*thread
= get_lwp_thread (lp
);
1756 struct lwp_info
*event_lp
= data
;
1758 /* Leave the LWP that has been elected to receive a SIGTRAP alone. */
1762 /* If a LWP other than the LWP that we're reporting an event for has
1763 hit a GDB breakpoint (as opposed to some random trap signal),
1764 then just arrange for it to hit it again later. We don't keep
1765 the SIGTRAP status and don't forward the SIGTRAP signal to the
1766 LWP. We will handle the current event, eventually we will resume
1767 all LWPs, and this one will get its breakpoint trap again.
1769 If we do not do this, then we run the risk that the user will
1770 delete or disable the breakpoint, but the LWP will have already
1773 if (thread
->last_resume_kind
!= resume_stop
1774 && thread
->last_status
.kind
== TARGET_WAITKIND_IGNORE
1775 && lp
->status_pending_p
1776 && WIFSTOPPED (lp
->status_pending
)
1777 && WSTOPSIG (lp
->status_pending
) == SIGTRAP
1779 && !lp
->stopped_by_watchpoint
1780 && cancel_breakpoint (lp
))
1781 /* Throw away the SIGTRAP. */
1782 lp
->status_pending_p
= 0;
1788 linux_cancel_breakpoints (void)
1790 find_inferior (&all_lwps
, cancel_breakpoints_callback
, NULL
);
1793 /* Select one LWP out of those that have events pending. */
1796 select_event_lwp (struct lwp_info
**orig_lp
)
1799 int random_selector
;
1800 struct lwp_info
*event_lp
;
1802 /* Give preference to any LWP that is being single-stepped. */
1804 = (struct lwp_info
*) find_inferior (&all_lwps
,
1805 select_singlestep_lwp_callback
, NULL
);
1806 if (event_lp
!= NULL
)
1810 "SEL: Select single-step %s\n",
1811 target_pid_to_str (ptid_of (event_lp
)));
1815 /* No single-stepping LWP. Select one at random, out of those
1816 which have had SIGTRAP events. */
1818 /* First see how many SIGTRAP events we have. */
1819 find_inferior (&all_lwps
, count_events_callback
, &num_events
);
1821 /* Now randomly pick a LWP out of those that have had a SIGTRAP. */
1822 random_selector
= (int)
1823 ((num_events
* (double) rand ()) / (RAND_MAX
+ 1.0));
1825 if (debug_threads
&& num_events
> 1)
1827 "SEL: Found %d SIGTRAP events, selecting #%d\n",
1828 num_events
, random_selector
);
1830 event_lp
= (struct lwp_info
*) find_inferior (&all_lwps
,
1831 select_event_lwp_callback
,
1835 if (event_lp
!= NULL
)
1837 /* Switch the event LWP. */
1838 *orig_lp
= event_lp
;
1842 /* Decrement the suspend count of an LWP. */
1845 unsuspend_one_lwp (struct inferior_list_entry
*entry
, void *except
)
1847 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
1849 /* Ignore EXCEPT. */
1855 gdb_assert (lwp
->suspended
>= 0);
1859 /* Decrement the suspend count of all LWPs, except EXCEPT, if non
1863 unsuspend_all_lwps (struct lwp_info
*except
)
1865 find_inferior (&all_lwps
, unsuspend_one_lwp
, except
);
1868 static void move_out_of_jump_pad_callback (struct inferior_list_entry
*entry
);
1869 static int stuck_in_jump_pad_callback (struct inferior_list_entry
*entry
,
1871 static int lwp_running (struct inferior_list_entry
*entry
, void *data
);
1872 static ptid_t
linux_wait_1 (ptid_t ptid
,
1873 struct target_waitstatus
*ourstatus
,
1874 int target_options
);
1876 /* Stabilize threads (move out of jump pads).
1878 If a thread is midway collecting a fast tracepoint, we need to
1879 finish the collection and move it out of the jump pad before
1880 reporting the signal.
1882 This avoids recursion while collecting (when a signal arrives
1883 midway, and the signal handler itself collects), which would trash
1884 the trace buffer. In case the user set a breakpoint in a signal
1885 handler, this avoids the backtrace showing the jump pad, etc..
1886 Most importantly, there are certain things we can't do safely if
1887 threads are stopped in a jump pad (or in its callee's). For
1890 - starting a new trace run. A thread still collecting the
1891 previous run, could trash the trace buffer when resumed. The trace
1892 buffer control structures would have been reset but the thread had
1893 no way to tell. The thread could even midway memcpy'ing to the
1894 buffer, which would mean that when resumed, it would clobber the
1895 trace buffer that had been set for a new run.
1897 - we can't rewrite/reuse the jump pads for new tracepoints
1898 safely. Say you do tstart while a thread is stopped midway while
1899 collecting. When the thread is later resumed, it finishes the
1900 collection, and returns to the jump pad, to execute the original
1901 instruction that was under the tracepoint jump at the time the
1902 older run had been started. If the jump pad had been rewritten
1903 since for something else in the new run, the thread would now
1904 execute the wrong / random instructions. */
1907 linux_stabilize_threads (void)
1909 struct thread_info
*save_inferior
;
1910 struct lwp_info
*lwp_stuck
;
1913 = (struct lwp_info
*) find_inferior (&all_lwps
,
1914 stuck_in_jump_pad_callback
, NULL
);
1915 if (lwp_stuck
!= NULL
)
1918 fprintf (stderr
, "can't stabilize, LWP %ld is stuck in jump pad\n",
1919 lwpid_of (lwp_stuck
));
1923 save_inferior
= current_inferior
;
1925 stabilizing_threads
= 1;
1928 for_each_inferior (&all_lwps
, move_out_of_jump_pad_callback
);
1930 /* Loop until all are stopped out of the jump pads. */
1931 while (find_inferior (&all_lwps
, lwp_running
, NULL
) != NULL
)
1933 struct target_waitstatus ourstatus
;
1934 struct lwp_info
*lwp
;
1938 /* Note that we go through the full wait even loop. While
1939 moving threads out of jump pad, we need to be able to step
1940 over internal breakpoints and such. */
1941 ptid
= linux_wait_1 (minus_one_ptid
, &ourstatus
, 0);
1943 if (ourstatus
.kind
== TARGET_WAITKIND_STOPPED
)
1945 lwp
= get_thread_lwp (current_inferior
);
1950 if (ourstatus
.value
.sig
!= TARGET_SIGNAL_0
1951 || current_inferior
->last_resume_kind
== resume_stop
)
1953 wstat
= W_STOPCODE (target_signal_to_host (ourstatus
.value
.sig
));
1954 enqueue_one_deferred_signal (lwp
, &wstat
);
1959 find_inferior (&all_lwps
, unsuspend_one_lwp
, NULL
);
1961 stabilizing_threads
= 0;
1963 current_inferior
= save_inferior
;
1968 = (struct lwp_info
*) find_inferior (&all_lwps
,
1969 stuck_in_jump_pad_callback
, NULL
);
1970 if (lwp_stuck
!= NULL
)
1971 fprintf (stderr
, "couldn't stabilize, LWP %ld got stuck in jump pad\n",
1972 lwpid_of (lwp_stuck
));
1976 /* Wait for process, returns status. */
1979 linux_wait_1 (ptid_t ptid
,
1980 struct target_waitstatus
*ourstatus
, int target_options
)
1983 struct lwp_info
*event_child
;
1986 int step_over_finished
;
1987 int bp_explains_trap
;
1988 int maybe_internal_trap
;
1992 /* Translate generic target options into linux options. */
1994 if (target_options
& TARGET_WNOHANG
)
1998 bp_explains_trap
= 0;
2000 ourstatus
->kind
= TARGET_WAITKIND_IGNORE
;
2002 /* If we were only supposed to resume one thread, only wait for
2003 that thread - if it's still alive. If it died, however - which
2004 can happen if we're coming from the thread death case below -
2005 then we need to make sure we restart the other threads. We could
2006 pick a thread at random or restart all; restarting all is less
2009 && !ptid_equal (cont_thread
, null_ptid
)
2010 && !ptid_equal (cont_thread
, minus_one_ptid
))
2012 struct thread_info
*thread
;
2014 thread
= (struct thread_info
*) find_inferior_id (&all_threads
,
2017 /* No stepping, no signal - unless one is pending already, of course. */
2020 struct thread_resume resume_info
;
2021 resume_info
.thread
= minus_one_ptid
;
2022 resume_info
.kind
= resume_continue
;
2023 resume_info
.sig
= 0;
2024 linux_resume (&resume_info
, 1);
2030 if (ptid_equal (step_over_bkpt
, null_ptid
))
2031 pid
= linux_wait_for_event (ptid
, &w
, options
);
2035 fprintf (stderr
, "step_over_bkpt set [%s], doing a blocking wait\n",
2036 target_pid_to_str (step_over_bkpt
));
2037 pid
= linux_wait_for_event (step_over_bkpt
, &w
, options
& ~WNOHANG
);
2040 if (pid
== 0) /* only if TARGET_WNOHANG */
2043 event_child
= get_thread_lwp (current_inferior
);
2045 /* If we are waiting for a particular child, and it exited,
2046 linux_wait_for_event will return its exit status. Similarly if
2047 the last child exited. If this is not the last child, however,
2048 do not report it as exited until there is a 'thread exited' response
2049 available in the remote protocol. Instead, just wait for another event.
2050 This should be safe, because if the thread crashed we will already
2051 have reported the termination signal to GDB; that should stop any
2052 in-progress stepping operations, etc.
2054 Report the exit status of the last thread to exit. This matches
2055 LinuxThreads' behavior. */
2057 if (last_thread_of_process_p (current_inferior
))
2059 if (WIFEXITED (w
) || WIFSIGNALED (w
))
2063 ourstatus
->kind
= TARGET_WAITKIND_EXITED
;
2064 ourstatus
->value
.integer
= WEXITSTATUS (w
);
2067 fprintf (stderr
, "\nChild exited with retcode = %x \n", WEXITSTATUS (w
));
2071 ourstatus
->kind
= TARGET_WAITKIND_SIGNALLED
;
2072 ourstatus
->value
.sig
= target_signal_from_host (WTERMSIG (w
));
2075 fprintf (stderr
, "\nChild terminated with signal = %x \n", WTERMSIG (w
));
2079 return ptid_of (event_child
);
2084 if (!WIFSTOPPED (w
))
2088 /* If this event was not handled before, and is not a SIGTRAP, we
2089 report it. SIGILL and SIGSEGV are also treated as traps in case
2090 a breakpoint is inserted at the current PC. If this target does
2091 not support internal breakpoints at all, we also report the
2092 SIGTRAP without further processing; it's of no concern to us. */
2094 = (supports_breakpoints ()
2095 && (WSTOPSIG (w
) == SIGTRAP
2096 || ((WSTOPSIG (w
) == SIGILL
2097 || WSTOPSIG (w
) == SIGSEGV
)
2098 && (*the_low_target
.breakpoint_at
) (event_child
->stop_pc
))));
2100 if (maybe_internal_trap
)
2102 /* Handle anything that requires bookkeeping before deciding to
2103 report the event or continue waiting. */
2105 /* First check if we can explain the SIGTRAP with an internal
2106 breakpoint, or if we should possibly report the event to GDB.
2107 Do this before anything that may remove or insert a
2109 bp_explains_trap
= breakpoint_inserted_here (event_child
->stop_pc
);
2111 /* We have a SIGTRAP, possibly a step-over dance has just
2112 finished. If so, tweak the state machine accordingly,
2113 reinsert breakpoints and delete any reinsert (software
2114 single-step) breakpoints. */
2115 step_over_finished
= finish_step_over (event_child
);
2117 /* Now invoke the callbacks of any internal breakpoints there. */
2118 check_breakpoints (event_child
->stop_pc
);
2120 /* Handle tracepoint data collecting. This may overflow the
2121 trace buffer, and cause a tracing stop, removing
2123 trace_event
= handle_tracepoints (event_child
);
2125 if (bp_explains_trap
)
2127 /* If we stepped or ran into an internal breakpoint, we've
2128 already handled it. So next time we resume (from this
2129 PC), we should step over it. */
2131 fprintf (stderr
, "Hit a gdbserver breakpoint.\n");
2133 if (breakpoint_here (event_child
->stop_pc
))
2134 event_child
->need_step_over
= 1;
2139 /* We have some other signal, possibly a step-over dance was in
2140 progress, and it should be cancelled too. */
2141 step_over_finished
= finish_step_over (event_child
);
2144 /* We have all the data we need. Either report the event to GDB, or
2145 resume threads and keep waiting for more. */
2147 /* If we're collecting a fast tracepoint, finish the collection and
2148 move out of the jump pad before delivering a signal. See
2149 linux_stabilize_threads. */
2152 && WSTOPSIG (w
) != SIGTRAP
2153 && supports_fast_tracepoints ()
2154 && in_process_agent_loaded ())
2158 "Got signal %d for LWP %ld. Check if we need "
2159 "to defer or adjust it.\n",
2160 WSTOPSIG (w
), lwpid_of (event_child
));
2162 /* Allow debugging the jump pad itself. */
2163 if (current_inferior
->last_resume_kind
!= resume_step
2164 && maybe_move_out_of_jump_pad (event_child
, &w
))
2166 enqueue_one_deferred_signal (event_child
, &w
);
2170 "Signal %d for LWP %ld deferred (in jump pad)\n",
2171 WSTOPSIG (w
), lwpid_of (event_child
));
2173 linux_resume_one_lwp (event_child
, 0, 0, NULL
);
2178 if (event_child
->collecting_fast_tracepoint
)
2182 LWP %ld was trying to move out of the jump pad (%d). \
2183 Check if we're already there.\n",
2184 lwpid_of (event_child
),
2185 event_child
->collecting_fast_tracepoint
);
2189 event_child
->collecting_fast_tracepoint
2190 = linux_fast_tracepoint_collecting (event_child
, NULL
);
2192 if (event_child
->collecting_fast_tracepoint
!= 1)
2194 /* No longer need this breakpoint. */
2195 if (event_child
->exit_jump_pad_bkpt
!= NULL
)
2199 "No longer need exit-jump-pad bkpt; removing it."
2200 "stopping all threads momentarily.\n");
2202 /* Other running threads could hit this breakpoint.
2203 We don't handle moribund locations like GDB does,
2204 instead we always pause all threads when removing
2205 breakpoints, so that any step-over or
2206 decr_pc_after_break adjustment is always taken
2207 care of while the breakpoint is still
2209 stop_all_lwps (1, event_child
);
2210 cancel_breakpoints ();
2212 delete_breakpoint (event_child
->exit_jump_pad_bkpt
);
2213 event_child
->exit_jump_pad_bkpt
= NULL
;
2215 unstop_all_lwps (1, event_child
);
2217 gdb_assert (event_child
->suspended
>= 0);
2221 if (event_child
->collecting_fast_tracepoint
== 0)
2225 "fast tracepoint finished "
2226 "collecting successfully.\n");
2228 /* We may have a deferred signal to report. */
2229 if (dequeue_one_deferred_signal (event_child
, &w
))
2232 fprintf (stderr
, "dequeued one signal.\n");
2237 fprintf (stderr
, "no deferred signals.\n");
2239 if (stabilizing_threads
)
2241 ourstatus
->kind
= TARGET_WAITKIND_STOPPED
;
2242 ourstatus
->value
.sig
= TARGET_SIGNAL_0
;
2243 return ptid_of (event_child
);
2249 /* Check whether GDB would be interested in this event. */
2251 /* If GDB is not interested in this signal, don't stop other
2252 threads, and don't report it to GDB. Just resume the inferior
2253 right away. We do this for threading-related signals as well as
2254 any that GDB specifically requested we ignore. But never ignore
2255 SIGSTOP if we sent it ourselves, and do not ignore signals when
2256 stepping - they may require special handling to skip the signal
2258 /* FIXME drow/2002-06-09: Get signal numbers from the inferior's
2261 && current_inferior
->last_resume_kind
!= resume_step
2263 #if defined (USE_THREAD_DB) && !defined (__ANDROID__)
2264 (current_process ()->private->thread_db
!= NULL
2265 && (WSTOPSIG (w
) == __SIGRTMIN
2266 || WSTOPSIG (w
) == __SIGRTMIN
+ 1))
2269 (pass_signals
[target_signal_from_host (WSTOPSIG (w
))]
2270 && !(WSTOPSIG (w
) == SIGSTOP
2271 && current_inferior
->last_resume_kind
== resume_stop
))))
2273 siginfo_t info
, *info_p
;
2276 fprintf (stderr
, "Ignored signal %d for LWP %ld.\n",
2277 WSTOPSIG (w
), lwpid_of (event_child
));
2279 if (ptrace (PTRACE_GETSIGINFO
, lwpid_of (event_child
), 0, &info
) == 0)
2283 linux_resume_one_lwp (event_child
, event_child
->stepping
,
2284 WSTOPSIG (w
), info_p
);
2288 /* If GDB wanted this thread to single step, we always want to
2289 report the SIGTRAP, and let GDB handle it. Watchpoints should
2290 always be reported. So should signals we can't explain. A
2291 SIGTRAP we can't explain could be a GDB breakpoint --- we may or
2292 not support Z0 breakpoints. If we do, we're be able to handle
2293 GDB breakpoints on top of internal breakpoints, by handling the
2294 internal breakpoint and still reporting the event to GDB. If we
2295 don't, we're out of luck, GDB won't see the breakpoint hit. */
2296 report_to_gdb
= (!maybe_internal_trap
2297 || current_inferior
->last_resume_kind
== resume_step
2298 || event_child
->stopped_by_watchpoint
2299 || (!step_over_finished
&& !bp_explains_trap
&& !trace_event
)
2300 || gdb_breakpoint_here (event_child
->stop_pc
));
2302 /* We found no reason GDB would want us to stop. We either hit one
2303 of our own breakpoints, or finished an internal step GDB
2304 shouldn't know about. */
2309 if (bp_explains_trap
)
2310 fprintf (stderr
, "Hit a gdbserver breakpoint.\n");
2311 if (step_over_finished
)
2312 fprintf (stderr
, "Step-over finished.\n");
2314 fprintf (stderr
, "Tracepoint event.\n");
2317 /* We're not reporting this breakpoint to GDB, so apply the
2318 decr_pc_after_break adjustment to the inferior's regcache
2321 if (the_low_target
.set_pc
!= NULL
)
2323 struct regcache
*regcache
2324 = get_thread_regcache (get_lwp_thread (event_child
), 1);
2325 (*the_low_target
.set_pc
) (regcache
, event_child
->stop_pc
);
2328 /* We may have finished stepping over a breakpoint. If so,
2329 we've stopped and suspended all LWPs momentarily except the
2330 stepping one. This is where we resume them all again. We're
2331 going to keep waiting, so use proceed, which handles stepping
2332 over the next breakpoint. */
2334 fprintf (stderr
, "proceeding all threads.\n");
2336 if (step_over_finished
)
2337 unsuspend_all_lwps (event_child
);
2339 proceed_all_lwps ();
2345 if (current_inferior
->last_resume_kind
== resume_step
)
2346 fprintf (stderr
, "GDB wanted to single-step, reporting event.\n");
2347 if (event_child
->stopped_by_watchpoint
)
2348 fprintf (stderr
, "Stopped by watchpoint.\n");
2349 if (gdb_breakpoint_here (event_child
->stop_pc
))
2350 fprintf (stderr
, "Stopped by GDB breakpoint.\n");
2352 fprintf (stderr
, "Hit a non-gdbserver trap event.\n");
2355 /* Alright, we're going to report a stop. */
2357 if (!non_stop
&& !stabilizing_threads
)
2359 /* In all-stop, stop all threads. */
2360 stop_all_lwps (0, NULL
);
2362 /* If we're not waiting for a specific LWP, choose an event LWP
2363 from among those that have had events. Giving equal priority
2364 to all LWPs that have had events helps prevent
2366 if (ptid_equal (ptid
, minus_one_ptid
))
2368 event_child
->status_pending_p
= 1;
2369 event_child
->status_pending
= w
;
2371 select_event_lwp (&event_child
);
2373 event_child
->status_pending_p
= 0;
2374 w
= event_child
->status_pending
;
2377 /* Now that we've selected our final event LWP, cancel any
2378 breakpoints in other LWPs that have hit a GDB breakpoint.
2379 See the comment in cancel_breakpoints_callback to find out
2381 find_inferior (&all_lwps
, cancel_breakpoints_callback
, event_child
);
2383 /* Stabilize threads (move out of jump pads). */
2384 stabilize_threads ();
2388 /* If we just finished a step-over, then all threads had been
2389 momentarily paused. In all-stop, that's fine, we want
2390 threads stopped by now anyway. In non-stop, we need to
2391 re-resume threads that GDB wanted to be running. */
2392 if (step_over_finished
)
2393 unstop_all_lwps (1, event_child
);
2396 ourstatus
->kind
= TARGET_WAITKIND_STOPPED
;
2398 if (current_inferior
->last_resume_kind
== resume_stop
2399 && WSTOPSIG (w
) == SIGSTOP
)
2401 /* A thread that has been requested to stop by GDB with vCont;t,
2402 and it stopped cleanly, so report as SIG0. The use of
2403 SIGSTOP is an implementation detail. */
2404 ourstatus
->value
.sig
= TARGET_SIGNAL_0
;
2406 else if (current_inferior
->last_resume_kind
== resume_stop
2407 && WSTOPSIG (w
) != SIGSTOP
)
2409 /* A thread that has been requested to stop by GDB with vCont;t,
2410 but, it stopped for other reasons. */
2411 ourstatus
->value
.sig
= target_signal_from_host (WSTOPSIG (w
));
2415 ourstatus
->value
.sig
= target_signal_from_host (WSTOPSIG (w
));
2418 gdb_assert (ptid_equal (step_over_bkpt
, null_ptid
));
2421 fprintf (stderr
, "linux_wait ret = %s, %d, %d\n",
2422 target_pid_to_str (ptid_of (event_child
)),
2424 ourstatus
->value
.sig
);
2426 return ptid_of (event_child
);
2429 /* Get rid of any pending event in the pipe. */
2431 async_file_flush (void)
2437 ret
= read (linux_event_pipe
[0], &buf
, 1);
2438 while (ret
>= 0 || (ret
== -1 && errno
== EINTR
));
2441 /* Put something in the pipe, so the event loop wakes up. */
2443 async_file_mark (void)
2447 async_file_flush ();
2450 ret
= write (linux_event_pipe
[1], "+", 1);
2451 while (ret
== 0 || (ret
== -1 && errno
== EINTR
));
2453 /* Ignore EAGAIN. If the pipe is full, the event loop will already
2454 be awakened anyway. */
2458 linux_wait (ptid_t ptid
,
2459 struct target_waitstatus
*ourstatus
, int target_options
)
2464 fprintf (stderr
, "linux_wait: [%s]\n", target_pid_to_str (ptid
));
2466 /* Flush the async file first. */
2467 if (target_is_async_p ())
2468 async_file_flush ();
2470 event_ptid
= linux_wait_1 (ptid
, ourstatus
, target_options
);
2472 /* If at least one stop was reported, there may be more. A single
2473 SIGCHLD can signal more than one child stop. */
2474 if (target_is_async_p ()
2475 && (target_options
& TARGET_WNOHANG
) != 0
2476 && !ptid_equal (event_ptid
, null_ptid
))
2482 /* Send a signal to an LWP. */
2485 kill_lwp (unsigned long lwpid
, int signo
)
2487 /* Use tkill, if possible, in case we are using nptl threads. If tkill
2488 fails, then we are not using nptl threads and we should be using kill. */
2492 static int tkill_failed
;
2499 ret
= syscall (__NR_tkill
, lwpid
, signo
);
2500 if (errno
!= ENOSYS
)
2507 return kill (lwpid
, signo
);
2511 linux_stop_lwp (struct lwp_info
*lwp
)
2517 send_sigstop (struct lwp_info
*lwp
)
2521 pid
= lwpid_of (lwp
);
2523 /* If we already have a pending stop signal for this process, don't
2525 if (lwp
->stop_expected
)
2528 fprintf (stderr
, "Have pending sigstop for lwp %d\n", pid
);
2534 fprintf (stderr
, "Sending sigstop to lwp %d\n", pid
);
2536 lwp
->stop_expected
= 1;
2537 kill_lwp (pid
, SIGSTOP
);
2541 send_sigstop_callback (struct inferior_list_entry
*entry
, void *except
)
2543 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2545 /* Ignore EXCEPT. */
2556 /* Increment the suspend count of an LWP, and stop it, if not stopped
2559 suspend_and_send_sigstop_callback (struct inferior_list_entry
*entry
,
2562 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2564 /* Ignore EXCEPT. */
2570 return send_sigstop_callback (entry
, except
);
2574 mark_lwp_dead (struct lwp_info
*lwp
, int wstat
)
2576 /* It's dead, really. */
2579 /* Store the exit status for later. */
2580 lwp
->status_pending_p
= 1;
2581 lwp
->status_pending
= wstat
;
2583 /* Prevent trying to stop it. */
2586 /* No further stops are expected from a dead lwp. */
2587 lwp
->stop_expected
= 0;
2591 wait_for_sigstop (struct inferior_list_entry
*entry
)
2593 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2594 struct thread_info
*saved_inferior
;
2603 fprintf (stderr
, "wait_for_sigstop: LWP %ld already stopped\n",
2608 saved_inferior
= current_inferior
;
2609 if (saved_inferior
!= NULL
)
2610 saved_tid
= ((struct inferior_list_entry
*) saved_inferior
)->id
;
2612 saved_tid
= null_ptid
; /* avoid bogus unused warning */
2614 ptid
= lwp
->head
.id
;
2617 fprintf (stderr
, "wait_for_sigstop: pulling one event\n");
2619 pid
= linux_wait_for_event (ptid
, &wstat
, __WALL
);
2621 /* If we stopped with a non-SIGSTOP signal, save it for later
2622 and record the pending SIGSTOP. If the process exited, just
2624 if (WIFSTOPPED (wstat
))
2627 fprintf (stderr
, "LWP %ld stopped with signal %d\n",
2628 lwpid_of (lwp
), WSTOPSIG (wstat
));
2630 if (WSTOPSIG (wstat
) != SIGSTOP
)
2633 fprintf (stderr
, "LWP %ld stopped with non-sigstop status %06x\n",
2634 lwpid_of (lwp
), wstat
);
2636 lwp
->status_pending_p
= 1;
2637 lwp
->status_pending
= wstat
;
2643 fprintf (stderr
, "Process %d exited while stopping LWPs\n", pid
);
2645 lwp
= find_lwp_pid (pid_to_ptid (pid
));
2648 /* Leave this status pending for the next time we're able to
2649 report it. In the mean time, we'll report this lwp as
2650 dead to GDB, so GDB doesn't try to read registers and
2651 memory from it. This can only happen if this was the
2652 last thread of the process; otherwise, PID is removed
2653 from the thread tables before linux_wait_for_event
2655 mark_lwp_dead (lwp
, wstat
);
2659 if (saved_inferior
== NULL
|| linux_thread_alive (saved_tid
))
2660 current_inferior
= saved_inferior
;
2664 fprintf (stderr
, "Previously current thread died.\n");
2668 /* We can't change the current inferior behind GDB's back,
2669 otherwise, a subsequent command may apply to the wrong
2671 current_inferior
= NULL
;
2675 /* Set a valid thread as current. */
2676 set_desired_inferior (0);
2681 /* Returns true if LWP ENTRY is stopped in a jump pad, and we can't
2682 move it out, because we need to report the stop event to GDB. For
2683 example, if the user puts a breakpoint in the jump pad, it's
2684 because she wants to debug it. */
2687 stuck_in_jump_pad_callback (struct inferior_list_entry
*entry
, void *data
)
2689 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2690 struct thread_info
*thread
= get_lwp_thread (lwp
);
2692 gdb_assert (lwp
->suspended
== 0);
2693 gdb_assert (lwp
->stopped
);
2695 /* Allow debugging the jump pad, gdb_collect, etc.. */
2696 return (supports_fast_tracepoints ()
2697 && in_process_agent_loaded ()
2698 && (gdb_breakpoint_here (lwp
->stop_pc
)
2699 || lwp
->stopped_by_watchpoint
2700 || thread
->last_resume_kind
== resume_step
)
2701 && linux_fast_tracepoint_collecting (lwp
, NULL
));
2705 move_out_of_jump_pad_callback (struct inferior_list_entry
*entry
)
2707 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2708 struct thread_info
*thread
= get_lwp_thread (lwp
);
2711 gdb_assert (lwp
->suspended
== 0);
2712 gdb_assert (lwp
->stopped
);
2714 wstat
= lwp
->status_pending_p
? &lwp
->status_pending
: NULL
;
2716 /* Allow debugging the jump pad, gdb_collect, etc. */
2717 if (!gdb_breakpoint_here (lwp
->stop_pc
)
2718 && !lwp
->stopped_by_watchpoint
2719 && thread
->last_resume_kind
!= resume_step
2720 && maybe_move_out_of_jump_pad (lwp
, wstat
))
2724 "LWP %ld needs stabilizing (in jump pad)\n",
2729 lwp
->status_pending_p
= 0;
2730 enqueue_one_deferred_signal (lwp
, wstat
);
2734 "Signal %d for LWP %ld deferred "
2736 WSTOPSIG (*wstat
), lwpid_of (lwp
));
2739 linux_resume_one_lwp (lwp
, 0, 0, NULL
);
2746 lwp_running (struct inferior_list_entry
*entry
, void *data
)
2748 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2757 /* Stop all lwps that aren't stopped yet, except EXCEPT, if not NULL.
2758 If SUSPEND, then also increase the suspend count of every LWP,
2762 stop_all_lwps (int suspend
, struct lwp_info
*except
)
2764 stopping_threads
= 1;
2767 find_inferior (&all_lwps
, suspend_and_send_sigstop_callback
, except
);
2769 find_inferior (&all_lwps
, send_sigstop_callback
, except
);
2770 for_each_inferior (&all_lwps
, wait_for_sigstop
);
2771 stopping_threads
= 0;
2774 /* Resume execution of the inferior process.
2775 If STEP is nonzero, single-step it.
2776 If SIGNAL is nonzero, give it that signal. */
2779 linux_resume_one_lwp (struct lwp_info
*lwp
,
2780 int step
, int signal
, siginfo_t
*info
)
2782 struct thread_info
*saved_inferior
;
2783 int fast_tp_collecting
;
2785 if (lwp
->stopped
== 0)
2788 fast_tp_collecting
= lwp
->collecting_fast_tracepoint
;
2790 gdb_assert (!stabilizing_threads
|| fast_tp_collecting
);
2792 /* Cancel actions that rely on GDB not changing the PC (e.g., the
2793 user used the "jump" command, or "set $pc = foo"). */
2794 if (lwp
->stop_pc
!= get_pc (lwp
))
2796 /* Collecting 'while-stepping' actions doesn't make sense
2798 release_while_stepping_state_list (get_lwp_thread (lwp
));
2801 /* If we have pending signals or status, and a new signal, enqueue the
2802 signal. Also enqueue the signal if we are waiting to reinsert a
2803 breakpoint; it will be picked up again below. */
2805 && (lwp
->status_pending_p
2806 || lwp
->pending_signals
!= NULL
2807 || lwp
->bp_reinsert
!= 0
2808 || fast_tp_collecting
))
2810 struct pending_signals
*p_sig
;
2811 p_sig
= xmalloc (sizeof (*p_sig
));
2812 p_sig
->prev
= lwp
->pending_signals
;
2813 p_sig
->signal
= signal
;
2815 memset (&p_sig
->info
, 0, sizeof (siginfo_t
));
2817 memcpy (&p_sig
->info
, info
, sizeof (siginfo_t
));
2818 lwp
->pending_signals
= p_sig
;
2821 if (lwp
->status_pending_p
)
2824 fprintf (stderr
, "Not resuming lwp %ld (%s, signal %d, stop %s);"
2825 " has pending status\n",
2826 lwpid_of (lwp
), step
? "step" : "continue", signal
,
2827 lwp
->stop_expected
? "expected" : "not expected");
2831 saved_inferior
= current_inferior
;
2832 current_inferior
= get_lwp_thread (lwp
);
2835 fprintf (stderr
, "Resuming lwp %ld (%s, signal %d, stop %s)\n",
2836 lwpid_of (lwp
), step
? "step" : "continue", signal
,
2837 lwp
->stop_expected
? "expected" : "not expected");
2839 /* This bit needs some thinking about. If we get a signal that
2840 we must report while a single-step reinsert is still pending,
2841 we often end up resuming the thread. It might be better to
2842 (ew) allow a stack of pending events; then we could be sure that
2843 the reinsert happened right away and not lose any signals.
2845 Making this stack would also shrink the window in which breakpoints are
2846 uninserted (see comment in linux_wait_for_lwp) but not enough for
2847 complete correctness, so it won't solve that problem. It may be
2848 worthwhile just to solve this one, however. */
2849 if (lwp
->bp_reinsert
!= 0)
2852 fprintf (stderr
, " pending reinsert at 0x%s\n",
2853 paddress (lwp
->bp_reinsert
));
2855 if (lwp
->bp_reinsert
!= 0 && can_hardware_single_step ())
2857 if (fast_tp_collecting
== 0)
2860 fprintf (stderr
, "BAD - reinserting but not stepping.\n");
2862 fprintf (stderr
, "BAD - reinserting and suspended(%d).\n",
2869 /* Postpone any pending signal. It was enqueued above. */
2873 if (fast_tp_collecting
== 1)
2877 lwp %ld wants to get out of fast tracepoint jump pad (exit-jump-pad-bkpt)\n",
2880 /* Postpone any pending signal. It was enqueued above. */
2883 else if (fast_tp_collecting
== 2)
2887 lwp %ld wants to get out of fast tracepoint jump pad single-stepping\n",
2890 if (can_hardware_single_step ())
2893 fatal ("moving out of jump pad single-stepping"
2894 " not implemented on this target");
2896 /* Postpone any pending signal. It was enqueued above. */
2900 /* If we have while-stepping actions in this thread set it stepping.
2901 If we have a signal to deliver, it may or may not be set to
2902 SIG_IGN, we don't know. Assume so, and allow collecting
2903 while-stepping into a signal handler. A possible smart thing to
2904 do would be to set an internal breakpoint at the signal return
2905 address, continue, and carry on catching this while-stepping
2906 action only when that breakpoint is hit. A future
2908 if (get_lwp_thread (lwp
)->while_stepping
!= NULL
2909 && can_hardware_single_step ())
2913 "lwp %ld has a while-stepping action -> forcing step.\n",
2918 if (debug_threads
&& the_low_target
.get_pc
!= NULL
)
2920 struct regcache
*regcache
= get_thread_regcache (current_inferior
, 1);
2921 CORE_ADDR pc
= (*the_low_target
.get_pc
) (regcache
);
2922 fprintf (stderr
, " resuming from pc 0x%lx\n", (long) pc
);
2925 /* If we have pending signals, consume one unless we are trying to
2926 reinsert a breakpoint or we're trying to finish a fast tracepoint
2928 if (lwp
->pending_signals
!= NULL
2929 && lwp
->bp_reinsert
== 0
2930 && fast_tp_collecting
== 0)
2932 struct pending_signals
**p_sig
;
2934 p_sig
= &lwp
->pending_signals
;
2935 while ((*p_sig
)->prev
!= NULL
)
2936 p_sig
= &(*p_sig
)->prev
;
2938 signal
= (*p_sig
)->signal
;
2939 if ((*p_sig
)->info
.si_signo
!= 0)
2940 ptrace (PTRACE_SETSIGINFO
, lwpid_of (lwp
), 0, &(*p_sig
)->info
);
2946 if (the_low_target
.prepare_to_resume
!= NULL
)
2947 the_low_target
.prepare_to_resume (lwp
);
2949 regcache_invalidate_one ((struct inferior_list_entry
*)
2950 get_lwp_thread (lwp
));
2953 lwp
->stopped_by_watchpoint
= 0;
2954 lwp
->stepping
= step
;
2955 ptrace (step
? PTRACE_SINGLESTEP
: PTRACE_CONT
, lwpid_of (lwp
), 0,
2956 /* Coerce to a uintptr_t first to avoid potential gcc warning
2957 of coercing an 8 byte integer to a 4 byte pointer. */
2958 (PTRACE_ARG4_TYPE
) (uintptr_t) signal
);
2960 current_inferior
= saved_inferior
;
2963 /* ESRCH from ptrace either means that the thread was already
2964 running (an error) or that it is gone (a race condition). If
2965 it's gone, we will get a notification the next time we wait,
2966 so we can ignore the error. We could differentiate these
2967 two, but it's tricky without waiting; the thread still exists
2968 as a zombie, so sending it signal 0 would succeed. So just
2973 perror_with_name ("ptrace");
2977 struct thread_resume_array
2979 struct thread_resume
*resume
;
2983 /* This function is called once per thread. We look up the thread
2984 in RESUME_PTR, and mark the thread with a pointer to the appropriate
2987 This algorithm is O(threads * resume elements), but resume elements
2988 is small (and will remain small at least until GDB supports thread
2991 linux_set_resume_request (struct inferior_list_entry
*entry
, void *arg
)
2993 struct lwp_info
*lwp
;
2994 struct thread_info
*thread
;
2996 struct thread_resume_array
*r
;
2998 thread
= (struct thread_info
*) entry
;
2999 lwp
= get_thread_lwp (thread
);
3002 for (ndx
= 0; ndx
< r
->n
; ndx
++)
3004 ptid_t ptid
= r
->resume
[ndx
].thread
;
3005 if (ptid_equal (ptid
, minus_one_ptid
)
3006 || ptid_equal (ptid
, entry
->id
)
3007 || (ptid_is_pid (ptid
)
3008 && (ptid_get_pid (ptid
) == pid_of (lwp
)))
3009 || (ptid_get_lwp (ptid
) == -1
3010 && (ptid_get_pid (ptid
) == pid_of (lwp
))))
3012 if (r
->resume
[ndx
].kind
== resume_stop
3013 && thread
->last_resume_kind
== resume_stop
)
3016 fprintf (stderr
, "already %s LWP %ld at GDB's request\n",
3017 thread
->last_status
.kind
== TARGET_WAITKIND_STOPPED
3025 lwp
->resume
= &r
->resume
[ndx
];
3026 thread
->last_resume_kind
= lwp
->resume
->kind
;
3028 /* If we had a deferred signal to report, dequeue one now.
3029 This can happen if LWP gets more than one signal while
3030 trying to get out of a jump pad. */
3032 && !lwp
->status_pending_p
3033 && dequeue_one_deferred_signal (lwp
, &lwp
->status_pending
))
3035 lwp
->status_pending_p
= 1;
3039 "Dequeueing deferred signal %d for LWP %ld, "
3040 "leaving status pending.\n",
3041 WSTOPSIG (lwp
->status_pending
), lwpid_of (lwp
));
3048 /* No resume action for this thread. */
3055 /* Set *FLAG_P if this lwp has an interesting status pending. */
3057 resume_status_pending_p (struct inferior_list_entry
*entry
, void *flag_p
)
3059 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
3061 /* LWPs which will not be resumed are not interesting, because
3062 we might not wait for them next time through linux_wait. */
3063 if (lwp
->resume
== NULL
)
3066 if (lwp
->status_pending_p
)
3067 * (int *) flag_p
= 1;
3072 /* Return 1 if this lwp that GDB wants running is stopped at an
3073 internal breakpoint that we need to step over. It assumes that any
3074 required STOP_PC adjustment has already been propagated to the
3075 inferior's regcache. */
3078 need_step_over_p (struct inferior_list_entry
*entry
, void *dummy
)
3080 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
3081 struct thread_info
*thread
;
3082 struct thread_info
*saved_inferior
;
3085 /* LWPs which will not be resumed are not interesting, because we
3086 might not wait for them next time through linux_wait. */
3092 "Need step over [LWP %ld]? Ignoring, not stopped\n",
3097 thread
= get_lwp_thread (lwp
);
3099 if (thread
->last_resume_kind
== resume_stop
)
3103 "Need step over [LWP %ld]? Ignoring, should remain stopped\n",
3108 gdb_assert (lwp
->suspended
>= 0);
3114 "Need step over [LWP %ld]? Ignoring, suspended\n",
3119 if (!lwp
->need_step_over
)
3123 "Need step over [LWP %ld]? No\n", lwpid_of (lwp
));
3126 if (lwp
->status_pending_p
)
3130 "Need step over [LWP %ld]? Ignoring, has pending status.\n",
3135 /* Note: PC, not STOP_PC. Either GDB has adjusted the PC already,
3139 /* If the PC has changed since we stopped, then don't do anything,
3140 and let the breakpoint/tracepoint be hit. This happens if, for
3141 instance, GDB handled the decr_pc_after_break subtraction itself,
3142 GDB is OOL stepping this thread, or the user has issued a "jump"
3143 command, or poked thread's registers herself. */
3144 if (pc
!= lwp
->stop_pc
)
3148 "Need step over [LWP %ld]? Cancelling, PC was changed. "
3149 "Old stop_pc was 0x%s, PC is now 0x%s\n",
3150 lwpid_of (lwp
), paddress (lwp
->stop_pc
), paddress (pc
));
3152 lwp
->need_step_over
= 0;
3156 saved_inferior
= current_inferior
;
3157 current_inferior
= thread
;
3159 /* We can only step over breakpoints we know about. */
3160 if (breakpoint_here (pc
) || fast_tracepoint_jump_here (pc
))
3162 /* Don't step over a breakpoint that GDB expects to hit
3164 if (gdb_breakpoint_here (pc
))
3168 "Need step over [LWP %ld]? yes, but found"
3169 " GDB breakpoint at 0x%s; skipping step over\n",
3170 lwpid_of (lwp
), paddress (pc
));
3172 current_inferior
= saved_inferior
;
3179 "Need step over [LWP %ld]? yes, found breakpoint at 0x%s\n",
3180 lwpid_of (lwp
), paddress (pc
));
3182 /* We've found an lwp that needs stepping over --- return 1 so
3183 that find_inferior stops looking. */
3184 current_inferior
= saved_inferior
;
3186 /* If the step over is cancelled, this is set again. */
3187 lwp
->need_step_over
= 0;
3192 current_inferior
= saved_inferior
;
3196 "Need step over [LWP %ld]? No, no breakpoint found at 0x%s\n",
3197 lwpid_of (lwp
), paddress (pc
));
3202 /* Start a step-over operation on LWP. When LWP stopped at a
3203 breakpoint, to make progress, we need to remove the breakpoint out
3204 of the way. If we let other threads run while we do that, they may
3205 pass by the breakpoint location and miss hitting it. To avoid
3206 that, a step-over momentarily stops all threads while LWP is
3207 single-stepped while the breakpoint is temporarily uninserted from
3208 the inferior. When the single-step finishes, we reinsert the
3209 breakpoint, and let all threads that are supposed to be running,
3212 On targets that don't support hardware single-step, we don't
3213 currently support full software single-stepping. Instead, we only
3214 support stepping over the thread event breakpoint, by asking the
3215 low target where to place a reinsert breakpoint. Since this
3216 routine assumes the breakpoint being stepped over is a thread event
3217 breakpoint, it usually assumes the return address of the current
3218 function is a good enough place to set the reinsert breakpoint. */
3221 start_step_over (struct lwp_info
*lwp
)
3223 struct thread_info
*saved_inferior
;
3229 "Starting step-over on LWP %ld. Stopping all threads\n",
3232 stop_all_lwps (1, lwp
);
3233 gdb_assert (lwp
->suspended
== 0);
3236 fprintf (stderr
, "Done stopping all threads for step-over.\n");
3238 /* Note, we should always reach here with an already adjusted PC,
3239 either by GDB (if we're resuming due to GDB's request), or by our
3240 caller, if we just finished handling an internal breakpoint GDB
3241 shouldn't care about. */
3244 saved_inferior
= current_inferior
;
3245 current_inferior
= get_lwp_thread (lwp
);
3247 lwp
->bp_reinsert
= pc
;
3248 uninsert_breakpoints_at (pc
);
3249 uninsert_fast_tracepoint_jumps_at (pc
);
3251 if (can_hardware_single_step ())
3257 CORE_ADDR raddr
= (*the_low_target
.breakpoint_reinsert_addr
) ();
3258 set_reinsert_breakpoint (raddr
);
3262 current_inferior
= saved_inferior
;
3264 linux_resume_one_lwp (lwp
, step
, 0, NULL
);
3266 /* Require next event from this LWP. */
3267 step_over_bkpt
= lwp
->head
.id
;
3271 /* Finish a step-over. Reinsert the breakpoint we had uninserted in
3272 start_step_over, if still there, and delete any reinsert
3273 breakpoints we've set, on non hardware single-step targets. */
3276 finish_step_over (struct lwp_info
*lwp
)
3278 if (lwp
->bp_reinsert
!= 0)
3281 fprintf (stderr
, "Finished step over.\n");
3283 /* Reinsert any breakpoint at LWP->BP_REINSERT. Note that there
3284 may be no breakpoint to reinsert there by now. */
3285 reinsert_breakpoints_at (lwp
->bp_reinsert
);
3286 reinsert_fast_tracepoint_jumps_at (lwp
->bp_reinsert
);
3288 lwp
->bp_reinsert
= 0;
3290 /* Delete any software-single-step reinsert breakpoints. No
3291 longer needed. We don't have to worry about other threads
3292 hitting this trap, and later not being able to explain it,
3293 because we were stepping over a breakpoint, and we hold all
3294 threads but LWP stopped while doing that. */
3295 if (!can_hardware_single_step ())
3296 delete_reinsert_breakpoints ();
3298 step_over_bkpt
= null_ptid
;
3305 /* This function is called once per thread. We check the thread's resume
3306 request, which will tell us whether to resume, step, or leave the thread
3307 stopped; and what signal, if any, it should be sent.
3309 For threads which we aren't explicitly told otherwise, we preserve
3310 the stepping flag; this is used for stepping over gdbserver-placed
3313 If pending_flags was set in any thread, we queue any needed
3314 signals, since we won't actually resume. We already have a pending
3315 event to report, so we don't need to preserve any step requests;
3316 they should be re-issued if necessary. */
3319 linux_resume_one_thread (struct inferior_list_entry
*entry
, void *arg
)
3321 struct lwp_info
*lwp
;
3322 struct thread_info
*thread
;
3324 int leave_all_stopped
= * (int *) arg
;
3327 thread
= (struct thread_info
*) entry
;
3328 lwp
= get_thread_lwp (thread
);
3330 if (lwp
->resume
== NULL
)
3333 if (lwp
->resume
->kind
== resume_stop
)
3336 fprintf (stderr
, "resume_stop request for LWP %ld\n", lwpid_of (lwp
));
3341 fprintf (stderr
, "stopping LWP %ld\n", lwpid_of (lwp
));
3343 /* Stop the thread, and wait for the event asynchronously,
3344 through the event loop. */
3350 fprintf (stderr
, "already stopped LWP %ld\n",
3353 /* The LWP may have been stopped in an internal event that
3354 was not meant to be notified back to GDB (e.g., gdbserver
3355 breakpoint), so we should be reporting a stop event in
3358 /* If the thread already has a pending SIGSTOP, this is a
3359 no-op. Otherwise, something later will presumably resume
3360 the thread and this will cause it to cancel any pending
3361 operation, due to last_resume_kind == resume_stop. If
3362 the thread already has a pending status to report, we
3363 will still report it the next time we wait - see
3364 status_pending_p_callback. */
3366 /* If we already have a pending signal to report, then
3367 there's no need to queue a SIGSTOP, as this means we're
3368 midway through moving the LWP out of the jumppad, and we
3369 will report the pending signal as soon as that is
3371 if (lwp
->pending_signals_to_report
== NULL
)
3375 /* For stop requests, we're done. */
3377 thread
->last_status
.kind
= TARGET_WAITKIND_IGNORE
;
3381 /* If this thread which is about to be resumed has a pending status,
3382 then don't resume any threads - we can just report the pending
3383 status. Make sure to queue any signals that would otherwise be
3384 sent. In all-stop mode, we do this decision based on if *any*
3385 thread has a pending status. If there's a thread that needs the
3386 step-over-breakpoint dance, then don't resume any other thread
3387 but that particular one. */
3388 leave_pending
= (lwp
->status_pending_p
|| leave_all_stopped
);
3393 fprintf (stderr
, "resuming LWP %ld\n", lwpid_of (lwp
));
3395 step
= (lwp
->resume
->kind
== resume_step
);
3396 linux_resume_one_lwp (lwp
, step
, lwp
->resume
->sig
, NULL
);
3401 fprintf (stderr
, "leaving LWP %ld stopped\n", lwpid_of (lwp
));
3403 /* If we have a new signal, enqueue the signal. */
3404 if (lwp
->resume
->sig
!= 0)
3406 struct pending_signals
*p_sig
;
3407 p_sig
= xmalloc (sizeof (*p_sig
));
3408 p_sig
->prev
= lwp
->pending_signals
;
3409 p_sig
->signal
= lwp
->resume
->sig
;
3410 memset (&p_sig
->info
, 0, sizeof (siginfo_t
));
3412 /* If this is the same signal we were previously stopped by,
3413 make sure to queue its siginfo. We can ignore the return
3414 value of ptrace; if it fails, we'll skip
3415 PTRACE_SETSIGINFO. */
3416 if (WIFSTOPPED (lwp
->last_status
)
3417 && WSTOPSIG (lwp
->last_status
) == lwp
->resume
->sig
)
3418 ptrace (PTRACE_GETSIGINFO
, lwpid_of (lwp
), 0, &p_sig
->info
);
3420 lwp
->pending_signals
= p_sig
;
3424 thread
->last_status
.kind
= TARGET_WAITKIND_IGNORE
;
3430 linux_resume (struct thread_resume
*resume_info
, size_t n
)
3432 struct thread_resume_array array
= { resume_info
, n
};
3433 struct lwp_info
*need_step_over
= NULL
;
3435 int leave_all_stopped
;
3437 find_inferior (&all_threads
, linux_set_resume_request
, &array
);
3439 /* If there is a thread which would otherwise be resumed, which has
3440 a pending status, then don't resume any threads - we can just
3441 report the pending status. Make sure to queue any signals that
3442 would otherwise be sent. In non-stop mode, we'll apply this
3443 logic to each thread individually. We consume all pending events
3444 before considering to start a step-over (in all-stop). */
3447 find_inferior (&all_lwps
, resume_status_pending_p
, &any_pending
);
3449 /* If there is a thread which would otherwise be resumed, which is
3450 stopped at a breakpoint that needs stepping over, then don't
3451 resume any threads - have it step over the breakpoint with all
3452 other threads stopped, then resume all threads again. Make sure
3453 to queue any signals that would otherwise be delivered or
3455 if (!any_pending
&& supports_breakpoints ())
3457 = (struct lwp_info
*) find_inferior (&all_lwps
,
3458 need_step_over_p
, NULL
);
3460 leave_all_stopped
= (need_step_over
!= NULL
|| any_pending
);
3464 if (need_step_over
!= NULL
)
3465 fprintf (stderr
, "Not resuming all, need step over\n");
3466 else if (any_pending
)
3468 "Not resuming, all-stop and found "
3469 "an LWP with pending status\n");
3471 fprintf (stderr
, "Resuming, no pending status or step over needed\n");
3474 /* Even if we're leaving threads stopped, queue all signals we'd
3475 otherwise deliver. */
3476 find_inferior (&all_threads
, linux_resume_one_thread
, &leave_all_stopped
);
3479 start_step_over (need_step_over
);
3482 /* This function is called once per thread. We check the thread's
3483 last resume request, which will tell us whether to resume, step, or
3484 leave the thread stopped. Any signal the client requested to be
3485 delivered has already been enqueued at this point.
3487 If any thread that GDB wants running is stopped at an internal
3488 breakpoint that needs stepping over, we start a step-over operation
3489 on that particular thread, and leave all others stopped. */
3492 proceed_one_lwp (struct inferior_list_entry
*entry
, void *except
)
3494 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
3495 struct thread_info
*thread
;
3503 "proceed_one_lwp: lwp %ld\n", lwpid_of (lwp
));
3508 fprintf (stderr
, " LWP %ld already running\n", lwpid_of (lwp
));
3512 thread
= get_lwp_thread (lwp
);
3514 if (thread
->last_resume_kind
== resume_stop
3515 && thread
->last_status
.kind
!= TARGET_WAITKIND_IGNORE
)
3518 fprintf (stderr
, " client wants LWP to remain %ld stopped\n",
3523 if (lwp
->status_pending_p
)
3526 fprintf (stderr
, " LWP %ld has pending status, leaving stopped\n",
3531 gdb_assert (lwp
->suspended
>= 0);
3536 fprintf (stderr
, " LWP %ld is suspended\n", lwpid_of (lwp
));
3540 if (thread
->last_resume_kind
== resume_stop
3541 && lwp
->pending_signals_to_report
== NULL
3542 && lwp
->collecting_fast_tracepoint
== 0)
3544 /* We haven't reported this LWP as stopped yet (otherwise, the
3545 last_status.kind check above would catch it, and we wouldn't
3546 reach here. This LWP may have been momentarily paused by a
3547 stop_all_lwps call while handling for example, another LWP's
3548 step-over. In that case, the pending expected SIGSTOP signal
3549 that was queued at vCont;t handling time will have already
3550 been consumed by wait_for_sigstop, and so we need to requeue
3551 another one here. Note that if the LWP already has a SIGSTOP
3552 pending, this is a no-op. */
3556 "Client wants LWP %ld to stop. "
3557 "Making sure it has a SIGSTOP pending\n",
3563 step
= thread
->last_resume_kind
== resume_step
;
3564 linux_resume_one_lwp (lwp
, step
, 0, NULL
);
3569 unsuspend_and_proceed_one_lwp (struct inferior_list_entry
*entry
, void *except
)
3571 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
3577 gdb_assert (lwp
->suspended
>= 0);
3579 return proceed_one_lwp (entry
, except
);
3582 /* When we finish a step-over, set threads running again. If there's
3583 another thread that may need a step-over, now's the time to start
3584 it. Eventually, we'll move all threads past their breakpoints. */
3587 proceed_all_lwps (void)
3589 struct lwp_info
*need_step_over
;
3591 /* If there is a thread which would otherwise be resumed, which is
3592 stopped at a breakpoint that needs stepping over, then don't
3593 resume any threads - have it step over the breakpoint with all
3594 other threads stopped, then resume all threads again. */
3596 if (supports_breakpoints ())
3599 = (struct lwp_info
*) find_inferior (&all_lwps
,
3600 need_step_over_p
, NULL
);
3602 if (need_step_over
!= NULL
)
3605 fprintf (stderr
, "proceed_all_lwps: found "
3606 "thread %ld needing a step-over\n",
3607 lwpid_of (need_step_over
));
3609 start_step_over (need_step_over
);
3615 fprintf (stderr
, "Proceeding, no step-over needed\n");
3617 find_inferior (&all_lwps
, proceed_one_lwp
, NULL
);
3620 /* Stopped LWPs that the client wanted to be running, that don't have
3621 pending statuses, are set to run again, except for EXCEPT, if not
3622 NULL. This undoes a stop_all_lwps call. */
3625 unstop_all_lwps (int unsuspend
, struct lwp_info
*except
)
3631 "unstopping all lwps, except=(LWP %ld)\n", lwpid_of (except
));
3634 "unstopping all lwps\n");
3638 find_inferior (&all_lwps
, unsuspend_and_proceed_one_lwp
, except
);
3640 find_inferior (&all_lwps
, proceed_one_lwp
, except
);
3643 #ifdef HAVE_LINUX_USRREGS
3646 register_addr (int regnum
)
3650 if (regnum
< 0 || regnum
>= the_low_target
.num_regs
)
3651 error ("Invalid register number %d.", regnum
);
3653 addr
= the_low_target
.regmap
[regnum
];
3658 /* Fetch one register. */
3660 fetch_register (struct regcache
*regcache
, int regno
)
3667 if (regno
>= the_low_target
.num_regs
)
3669 if ((*the_low_target
.cannot_fetch_register
) (regno
))
3672 regaddr
= register_addr (regno
);
3676 pid
= lwpid_of (get_thread_lwp (current_inferior
));
3677 size
= ((register_size (regno
) + sizeof (PTRACE_XFER_TYPE
) - 1)
3678 & - sizeof (PTRACE_XFER_TYPE
));
3679 buf
= alloca (size
);
3680 for (i
= 0; i
< size
; i
+= sizeof (PTRACE_XFER_TYPE
))
3683 *(PTRACE_XFER_TYPE
*) (buf
+ i
) =
3684 ptrace (PTRACE_PEEKUSER
, pid
,
3685 /* Coerce to a uintptr_t first to avoid potential gcc warning
3686 of coercing an 8 byte integer to a 4 byte pointer. */
3687 (PTRACE_ARG3_TYPE
) (uintptr_t) regaddr
, 0);
3688 regaddr
+= sizeof (PTRACE_XFER_TYPE
);
3690 error ("reading register %d: %s", regno
, strerror (errno
));
3693 if (the_low_target
.supply_ptrace_register
)
3694 the_low_target
.supply_ptrace_register (regcache
, regno
, buf
);
3696 supply_register (regcache
, regno
, buf
);
3699 /* Fetch all registers, or just one, from the child process. */
3701 usr_fetch_inferior_registers (struct regcache
*regcache
, int regno
)
3704 for (regno
= 0; regno
< the_low_target
.num_regs
; regno
++)
3705 fetch_register (regcache
, regno
);
3707 fetch_register (regcache
, regno
);
3710 /* Store our register values back into the inferior.
3711 If REGNO is -1, do this for all registers.
3712 Otherwise, REGNO specifies which register (so we can save time). */
3714 usr_store_inferior_registers (struct regcache
*regcache
, int regno
)
3723 if (regno
>= the_low_target
.num_regs
)
3726 if ((*the_low_target
.cannot_store_register
) (regno
) == 1)
3729 regaddr
= register_addr (regno
);
3733 size
= (register_size (regno
) + sizeof (PTRACE_XFER_TYPE
) - 1)
3734 & - sizeof (PTRACE_XFER_TYPE
);
3735 buf
= alloca (size
);
3736 memset (buf
, 0, size
);
3738 if (the_low_target
.collect_ptrace_register
)
3739 the_low_target
.collect_ptrace_register (regcache
, regno
, buf
);
3741 collect_register (regcache
, regno
, buf
);
3743 pid
= lwpid_of (get_thread_lwp (current_inferior
));
3744 for (i
= 0; i
< size
; i
+= sizeof (PTRACE_XFER_TYPE
))
3747 ptrace (PTRACE_POKEUSER
, pid
,
3748 /* Coerce to a uintptr_t first to avoid potential gcc warning
3749 about coercing an 8 byte integer to a 4 byte pointer. */
3750 (PTRACE_ARG3_TYPE
) (uintptr_t) regaddr
,
3751 (PTRACE_ARG4_TYPE
) *(PTRACE_XFER_TYPE
*) (buf
+ i
));
3754 /* At this point, ESRCH should mean the process is
3755 already gone, in which case we simply ignore attempts
3756 to change its registers. See also the related
3757 comment in linux_resume_one_lwp. */
3761 if ((*the_low_target
.cannot_store_register
) (regno
) == 0)
3762 error ("writing register %d: %s", regno
, strerror (errno
));
3764 regaddr
+= sizeof (PTRACE_XFER_TYPE
);
3768 for (regno
= 0; regno
< the_low_target
.num_regs
; regno
++)
3769 usr_store_inferior_registers (regcache
, regno
);
3771 #endif /* HAVE_LINUX_USRREGS */
3775 #ifdef HAVE_LINUX_REGSETS
3778 regsets_fetch_inferior_registers (struct regcache
*regcache
)
3780 struct regset_info
*regset
;
3781 int saw_general_regs
= 0;
3785 regset
= target_regsets
;
3787 pid
= lwpid_of (get_thread_lwp (current_inferior
));
3788 while (regset
->size
>= 0)
3793 if (regset
->size
== 0 || disabled_regsets
[regset
- target_regsets
])
3799 buf
= xmalloc (regset
->size
);
3801 nt_type
= regset
->nt_type
;
3805 iov
.iov_len
= regset
->size
;
3806 data
= (void *) &iov
;
3812 res
= ptrace (regset
->get_request
, pid
, nt_type
, data
);
3814 res
= ptrace (regset
->get_request
, pid
, data
, nt_type
);
3820 /* If we get EIO on a regset, do not try it again for
3822 disabled_regsets
[regset
- target_regsets
] = 1;
3829 sprintf (s
, "ptrace(regsets_fetch_inferior_registers) PID=%d",
3834 else if (regset
->type
== GENERAL_REGS
)
3835 saw_general_regs
= 1;
3836 regset
->store_function (regcache
, buf
);
3840 if (saw_general_regs
)
3847 regsets_store_inferior_registers (struct regcache
*regcache
)
3849 struct regset_info
*regset
;
3850 int saw_general_regs
= 0;
3854 regset
= target_regsets
;
3856 pid
= lwpid_of (get_thread_lwp (current_inferior
));
3857 while (regset
->size
>= 0)
3862 if (regset
->size
== 0 || disabled_regsets
[regset
- target_regsets
])
3868 buf
= xmalloc (regset
->size
);
3870 /* First fill the buffer with the current register set contents,
3871 in case there are any items in the kernel's regset that are
3872 not in gdbserver's regcache. */
3874 nt_type
= regset
->nt_type
;
3878 iov
.iov_len
= regset
->size
;
3879 data
= (void *) &iov
;
3885 res
= ptrace (regset
->get_request
, pid
, nt_type
, data
);
3887 res
= ptrace (regset
->get_request
, pid
, &iov
, data
);
3892 /* Then overlay our cached registers on that. */
3893 regset
->fill_function (regcache
, buf
);
3895 /* Only now do we write the register set. */
3897 res
= ptrace (regset
->set_request
, pid
, nt_type
, data
);
3899 res
= ptrace (regset
->set_request
, pid
, data
, nt_type
);
3907 /* If we get EIO on a regset, do not try it again for
3909 disabled_regsets
[regset
- target_regsets
] = 1;
3913 else if (errno
== ESRCH
)
3915 /* At this point, ESRCH should mean the process is
3916 already gone, in which case we simply ignore attempts
3917 to change its registers. See also the related
3918 comment in linux_resume_one_lwp. */
3924 perror ("Warning: ptrace(regsets_store_inferior_registers)");
3927 else if (regset
->type
== GENERAL_REGS
)
3928 saw_general_regs
= 1;
3932 if (saw_general_regs
)
3939 #endif /* HAVE_LINUX_REGSETS */
3943 linux_fetch_registers (struct regcache
*regcache
, int regno
)
3945 #ifdef HAVE_LINUX_REGSETS
3946 if (regsets_fetch_inferior_registers (regcache
) == 0)
3949 #ifdef HAVE_LINUX_USRREGS
3950 usr_fetch_inferior_registers (regcache
, regno
);
3955 linux_store_registers (struct regcache
*regcache
, int regno
)
3957 #ifdef HAVE_LINUX_REGSETS
3958 if (regsets_store_inferior_registers (regcache
) == 0)
3961 #ifdef HAVE_LINUX_USRREGS
3962 usr_store_inferior_registers (regcache
, regno
);
3967 /* Copy LEN bytes from inferior's memory starting at MEMADDR
3968 to debugger memory starting at MYADDR. */
3971 linux_read_memory (CORE_ADDR memaddr
, unsigned char *myaddr
, int len
)
3974 /* Round starting address down to longword boundary. */
3975 register CORE_ADDR addr
= memaddr
& -(CORE_ADDR
) sizeof (PTRACE_XFER_TYPE
);
3976 /* Round ending address up; get number of longwords that makes. */
3978 = (((memaddr
+ len
) - addr
) + sizeof (PTRACE_XFER_TYPE
) - 1)
3979 / sizeof (PTRACE_XFER_TYPE
);
3980 /* Allocate buffer of that many longwords. */
3981 register PTRACE_XFER_TYPE
*buffer
3982 = (PTRACE_XFER_TYPE
*) alloca (count
* sizeof (PTRACE_XFER_TYPE
));
3985 int pid
= lwpid_of (get_thread_lwp (current_inferior
));
3987 /* Try using /proc. Don't bother for one word. */
3988 if (len
>= 3 * sizeof (long))
3990 /* We could keep this file open and cache it - possibly one per
3991 thread. That requires some juggling, but is even faster. */
3992 sprintf (filename
, "/proc/%d/mem", pid
);
3993 fd
= open (filename
, O_RDONLY
| O_LARGEFILE
);
3997 /* If pread64 is available, use it. It's faster if the kernel
3998 supports it (only one syscall), and it's 64-bit safe even on
3999 32-bit platforms (for instance, SPARC debugging a SPARC64
4002 if (pread64 (fd
, myaddr
, len
, memaddr
) != len
)
4004 if (lseek (fd
, memaddr
, SEEK_SET
) == -1 || read (fd
, myaddr
, len
) != len
)
4016 /* Read all the longwords */
4017 for (i
= 0; i
< count
; i
++, addr
+= sizeof (PTRACE_XFER_TYPE
))
4020 /* Coerce the 3rd arg to a uintptr_t first to avoid potential gcc warning
4021 about coercing an 8 byte integer to a 4 byte pointer. */
4022 buffer
[i
] = ptrace (PTRACE_PEEKTEXT
, pid
,
4023 (PTRACE_ARG3_TYPE
) (uintptr_t) addr
, 0);
4028 /* Copy appropriate bytes out of the buffer. */
4030 (char *) buffer
+ (memaddr
& (sizeof (PTRACE_XFER_TYPE
) - 1)),
4036 /* Copy LEN bytes of data from debugger memory at MYADDR to inferior's
4037 memory at MEMADDR. On failure (cannot write to the inferior)
4038 returns the value of errno. */
4041 linux_write_memory (CORE_ADDR memaddr
, const unsigned char *myaddr
, int len
)
4044 /* Round starting address down to longword boundary. */
4045 register CORE_ADDR addr
= memaddr
& -(CORE_ADDR
) sizeof (PTRACE_XFER_TYPE
);
4046 /* Round ending address up; get number of longwords that makes. */
4048 = (((memaddr
+ len
) - addr
) + sizeof (PTRACE_XFER_TYPE
) - 1) / sizeof (PTRACE_XFER_TYPE
);
4049 /* Allocate buffer of that many longwords. */
4050 register PTRACE_XFER_TYPE
*buffer
= (PTRACE_XFER_TYPE
*) alloca (count
* sizeof (PTRACE_XFER_TYPE
));
4051 int pid
= lwpid_of (get_thread_lwp (current_inferior
));
4055 /* Dump up to four bytes. */
4056 unsigned int val
= * (unsigned int *) myaddr
;
4062 val
= val
& 0xffffff;
4063 fprintf (stderr
, "Writing %0*x to 0x%08lx\n", 2 * ((len
< 4) ? len
: 4),
4064 val
, (long)memaddr
);
4067 /* Fill start and end extra bytes of buffer with existing memory data. */
4070 /* Coerce the 3rd arg to a uintptr_t first to avoid potential gcc warning
4071 about coercing an 8 byte integer to a 4 byte pointer. */
4072 buffer
[0] = ptrace (PTRACE_PEEKTEXT
, pid
,
4073 (PTRACE_ARG3_TYPE
) (uintptr_t) addr
, 0);
4081 = ptrace (PTRACE_PEEKTEXT
, pid
,
4082 /* Coerce to a uintptr_t first to avoid potential gcc warning
4083 about coercing an 8 byte integer to a 4 byte pointer. */
4084 (PTRACE_ARG3_TYPE
) (uintptr_t) (addr
+ (count
- 1)
4085 * sizeof (PTRACE_XFER_TYPE
)),
4091 /* Copy data to be written over corresponding part of buffer. */
4093 memcpy ((char *) buffer
+ (memaddr
& (sizeof (PTRACE_XFER_TYPE
) - 1)), myaddr
, len
);
4095 /* Write the entire buffer. */
4097 for (i
= 0; i
< count
; i
++, addr
+= sizeof (PTRACE_XFER_TYPE
))
4100 ptrace (PTRACE_POKETEXT
, pid
,
4101 /* Coerce to a uintptr_t first to avoid potential gcc warning
4102 about coercing an 8 byte integer to a 4 byte pointer. */
4103 (PTRACE_ARG3_TYPE
) (uintptr_t) addr
,
4104 (PTRACE_ARG4_TYPE
) buffer
[i
]);
4112 /* Non-zero if the kernel supports PTRACE_O_TRACEFORK. */
4113 static int linux_supports_tracefork_flag
;
4116 linux_enable_event_reporting (int pid
)
4118 if (!linux_supports_tracefork_flag
)
4121 ptrace (PTRACE_SETOPTIONS
, pid
, 0, (PTRACE_ARG4_TYPE
) PTRACE_O_TRACECLONE
);
4124 /* Helper functions for linux_test_for_tracefork, called via clone (). */
4127 linux_tracefork_grandchild (void *arg
)
4132 #define STACK_SIZE 4096
4135 linux_tracefork_child (void *arg
)
4137 ptrace (PTRACE_TRACEME
, 0, 0, 0);
4138 kill (getpid (), SIGSTOP
);
4140 #if !(defined(__UCLIBC__) && defined(HAS_NOMMU))
4143 linux_tracefork_grandchild (NULL
);
4145 #else /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4148 __clone2 (linux_tracefork_grandchild
, arg
, STACK_SIZE
,
4149 CLONE_VM
| SIGCHLD
, NULL
);
4151 clone (linux_tracefork_grandchild
, arg
+ STACK_SIZE
,
4152 CLONE_VM
| SIGCHLD
, NULL
);
4155 #endif /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4160 /* Determine if PTRACE_O_TRACEFORK can be used to follow fork events. Make
4161 sure that we can enable the option, and that it had the desired
4165 linux_test_for_tracefork (void)
4167 int child_pid
, ret
, status
;
4169 #if defined(__UCLIBC__) && defined(HAS_NOMMU)
4170 char *stack
= xmalloc (STACK_SIZE
* 4);
4171 #endif /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4173 linux_supports_tracefork_flag
= 0;
4175 #if !(defined(__UCLIBC__) && defined(HAS_NOMMU))
4177 child_pid
= fork ();
4179 linux_tracefork_child (NULL
);
4181 #else /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4183 /* Use CLONE_VM instead of fork, to support uClinux (no MMU). */
4185 child_pid
= __clone2 (linux_tracefork_child
, stack
, STACK_SIZE
,
4186 CLONE_VM
| SIGCHLD
, stack
+ STACK_SIZE
* 2);
4187 #else /* !__ia64__ */
4188 child_pid
= clone (linux_tracefork_child
, stack
+ STACK_SIZE
,
4189 CLONE_VM
| SIGCHLD
, stack
+ STACK_SIZE
* 2);
4190 #endif /* !__ia64__ */
4192 #endif /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4194 if (child_pid
== -1)
4195 perror_with_name ("clone");
4197 ret
= my_waitpid (child_pid
, &status
, 0);
4199 perror_with_name ("waitpid");
4200 else if (ret
!= child_pid
)
4201 error ("linux_test_for_tracefork: waitpid: unexpected result %d.", ret
);
4202 if (! WIFSTOPPED (status
))
4203 error ("linux_test_for_tracefork: waitpid: unexpected status %d.", status
);
4205 ret
= ptrace (PTRACE_SETOPTIONS
, child_pid
, 0,
4206 (PTRACE_ARG4_TYPE
) PTRACE_O_TRACEFORK
);
4209 ret
= ptrace (PTRACE_KILL
, child_pid
, 0, 0);
4212 warning ("linux_test_for_tracefork: failed to kill child");
4216 ret
= my_waitpid (child_pid
, &status
, 0);
4217 if (ret
!= child_pid
)
4218 warning ("linux_test_for_tracefork: failed to wait for killed child");
4219 else if (!WIFSIGNALED (status
))
4220 warning ("linux_test_for_tracefork: unexpected wait status 0x%x from "
4221 "killed child", status
);
4226 ret
= ptrace (PTRACE_CONT
, child_pid
, 0, 0);
4228 warning ("linux_test_for_tracefork: failed to resume child");
4230 ret
= my_waitpid (child_pid
, &status
, 0);
4232 if (ret
== child_pid
&& WIFSTOPPED (status
)
4233 && status
>> 16 == PTRACE_EVENT_FORK
)
4236 ret
= ptrace (PTRACE_GETEVENTMSG
, child_pid
, 0, &second_pid
);
4237 if (ret
== 0 && second_pid
!= 0)
4241 linux_supports_tracefork_flag
= 1;
4242 my_waitpid (second_pid
, &second_status
, 0);
4243 ret
= ptrace (PTRACE_KILL
, second_pid
, 0, 0);
4245 warning ("linux_test_for_tracefork: failed to kill second child");
4246 my_waitpid (second_pid
, &status
, 0);
4250 warning ("linux_test_for_tracefork: unexpected result from waitpid "
4251 "(%d, status 0x%x)", ret
, status
);
4255 ret
= ptrace (PTRACE_KILL
, child_pid
, 0, 0);
4257 warning ("linux_test_for_tracefork: failed to kill child");
4258 my_waitpid (child_pid
, &status
, 0);
4260 while (WIFSTOPPED (status
));
4262 #if defined(__UCLIBC__) && defined(HAS_NOMMU)
4264 #endif /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4269 linux_look_up_symbols (void)
4271 #ifdef USE_THREAD_DB
4272 struct process_info
*proc
= current_process ();
4274 if (proc
->private->thread_db
!= NULL
)
4277 /* If the kernel supports tracing forks then it also supports tracing
4278 clones, and then we don't need to use the magic thread event breakpoint
4279 to learn about threads. */
4280 thread_db_init (!linux_supports_tracefork_flag
);
4285 linux_request_interrupt (void)
4287 extern unsigned long signal_pid
;
4289 if (!ptid_equal (cont_thread
, null_ptid
)
4290 && !ptid_equal (cont_thread
, minus_one_ptid
))
4292 struct lwp_info
*lwp
;
4295 lwp
= get_thread_lwp (current_inferior
);
4296 lwpid
= lwpid_of (lwp
);
4297 kill_lwp (lwpid
, SIGINT
);
4300 kill_lwp (signal_pid
, SIGINT
);
4303 /* Copy LEN bytes from inferior's auxiliary vector starting at OFFSET
4304 to debugger memory starting at MYADDR. */
4307 linux_read_auxv (CORE_ADDR offset
, unsigned char *myaddr
, unsigned int len
)
4309 char filename
[PATH_MAX
];
4311 int pid
= lwpid_of (get_thread_lwp (current_inferior
));
4313 xsnprintf (filename
, sizeof filename
, "/proc/%d/auxv", pid
);
4315 fd
= open (filename
, O_RDONLY
);
4319 if (offset
!= (CORE_ADDR
) 0
4320 && lseek (fd
, (off_t
) offset
, SEEK_SET
) != (off_t
) offset
)
4323 n
= read (fd
, myaddr
, len
);
4330 /* These breakpoint and watchpoint related wrapper functions simply
4331 pass on the function call if the target has registered a
4332 corresponding function. */
4335 linux_insert_point (char type
, CORE_ADDR addr
, int len
)
4337 if (the_low_target
.insert_point
!= NULL
)
4338 return the_low_target
.insert_point (type
, addr
, len
);
4340 /* Unsupported (see target.h). */
4345 linux_remove_point (char type
, CORE_ADDR addr
, int len
)
4347 if (the_low_target
.remove_point
!= NULL
)
4348 return the_low_target
.remove_point (type
, addr
, len
);
4350 /* Unsupported (see target.h). */
4355 linux_stopped_by_watchpoint (void)
4357 struct lwp_info
*lwp
= get_thread_lwp (current_inferior
);
4359 return lwp
->stopped_by_watchpoint
;
4363 linux_stopped_data_address (void)
4365 struct lwp_info
*lwp
= get_thread_lwp (current_inferior
);
4367 return lwp
->stopped_data_address
;
4370 #if defined(__UCLIBC__) && defined(HAS_NOMMU)
4371 #if defined(__mcoldfire__)
4372 /* These should really be defined in the kernel's ptrace.h header. */
4373 #define PT_TEXT_ADDR 49*4
4374 #define PT_DATA_ADDR 50*4
4375 #define PT_TEXT_END_ADDR 51*4
4378 /* Under uClinux, programs are loaded at non-zero offsets, which we need
4379 to tell gdb about. */
4382 linux_read_offsets (CORE_ADDR
*text_p
, CORE_ADDR
*data_p
)
4384 #if defined(PT_TEXT_ADDR) && defined(PT_DATA_ADDR) && defined(PT_TEXT_END_ADDR)
4385 unsigned long text
, text_end
, data
;
4386 int pid
= lwpid_of (get_thread_lwp (current_inferior
));
4390 text
= ptrace (PTRACE_PEEKUSER
, pid
, (long)PT_TEXT_ADDR
, 0);
4391 text_end
= ptrace (PTRACE_PEEKUSER
, pid
, (long)PT_TEXT_END_ADDR
, 0);
4392 data
= ptrace (PTRACE_PEEKUSER
, pid
, (long)PT_DATA_ADDR
, 0);
4396 /* Both text and data offsets produced at compile-time (and so
4397 used by gdb) are relative to the beginning of the program,
4398 with the data segment immediately following the text segment.
4399 However, the actual runtime layout in memory may put the data
4400 somewhere else, so when we send gdb a data base-address, we
4401 use the real data base address and subtract the compile-time
4402 data base-address from it (which is just the length of the
4403 text segment). BSS immediately follows data in both
4406 *data_p
= data
- (text_end
- text
);
4416 compare_ints (const void *xa
, const void *xb
)
4418 int a
= *(const int *)xa
;
4419 int b
= *(const int *)xb
;
4425 unique (int *b
, int *e
)
4434 /* Given PID, iterates over all threads in that process.
4436 Information about each thread, in a format suitable for qXfer:osdata:thread
4437 is printed to BUFFER, if it's not NULL. BUFFER is assumed to be already
4438 initialized, and the caller is responsible for finishing and appending '\0'
4441 The list of cores that threads are running on is assigned to *CORES, if it
4442 is not NULL. If no cores are found, *CORES will be set to NULL. Caller
4443 should free *CORES. */
4446 list_threads (int pid
, struct buffer
*buffer
, char **cores
)
4450 int *core_numbers
= xmalloc (sizeof (int) * allocated
);
4454 struct stat statbuf
;
4456 sprintf (pathname
, "/proc/%d/task", pid
);
4457 if (stat (pathname
, &statbuf
) == 0 && S_ISDIR (statbuf
.st_mode
))
4459 dir
= opendir (pathname
);
4462 free (core_numbers
);
4466 while ((dp
= readdir (dir
)) != NULL
)
4468 unsigned long lwp
= strtoul (dp
->d_name
, NULL
, 10);
4472 unsigned core
= linux_core_of_thread (ptid_build (pid
, lwp
, 0));
4476 char s
[sizeof ("4294967295")];
4477 sprintf (s
, "%u", core
);
4479 if (count
== allocated
)
4482 core_numbers
= realloc (core_numbers
,
4483 sizeof (int) * allocated
);
4485 core_numbers
[count
++] = core
;
4487 buffer_xml_printf (buffer
,
4489 "<column name=\"pid\">%d</column>"
4490 "<column name=\"tid\">%s</column>"
4491 "<column name=\"core\">%s</column>"
4492 "</item>", pid
, dp
->d_name
, s
);
4497 buffer_xml_printf (buffer
,
4499 "<column name=\"pid\">%d</column>"
4500 "<column name=\"tid\">%s</column>"
4501 "</item>", pid
, dp
->d_name
);
4512 struct buffer buffer2
;
4515 qsort (core_numbers
, count
, sizeof (int), compare_ints
);
4517 /* Remove duplicates. */
4519 e
= unique (b
, core_numbers
+ count
);
4521 buffer_init (&buffer2
);
4523 for (b
= core_numbers
; b
!= e
; ++b
)
4525 char number
[sizeof ("4294967295")];
4526 sprintf (number
, "%u", *b
);
4527 buffer_xml_printf (&buffer2
, "%s%s",
4528 (b
== core_numbers
) ? "" : ",", number
);
4530 buffer_grow_str0 (&buffer2
, "");
4532 *cores
= buffer_finish (&buffer2
);
4535 free (core_numbers
);
4539 show_process (int pid
, const char *username
, struct buffer
*buffer
)
4543 char cmd
[MAXPATHLEN
+ 1];
4545 sprintf (pathname
, "/proc/%d/cmdline", pid
);
4547 if ((f
= fopen (pathname
, "r")) != NULL
)
4549 size_t len
= fread (cmd
, 1, sizeof (cmd
) - 1, f
);
4554 for (i
= 0; i
< len
; i
++)
4559 buffer_xml_printf (buffer
,
4561 "<column name=\"pid\">%d</column>"
4562 "<column name=\"user\">%s</column>"
4563 "<column name=\"command\">%s</column>",
4568 /* This only collects core numbers, and does not print threads. */
4569 list_threads (pid
, NULL
, &cores
);
4573 buffer_xml_printf (buffer
,
4574 "<column name=\"cores\">%s</column>", cores
);
4578 buffer_xml_printf (buffer
, "</item>");
4585 linux_qxfer_osdata (const char *annex
,
4586 unsigned char *readbuf
, unsigned const char *writebuf
,
4587 CORE_ADDR offset
, int len
)
4589 /* We make the process list snapshot when the object starts to be
4591 static const char *buf
;
4592 static long len_avail
= -1;
4593 static struct buffer buffer
;
4599 if (strcmp (annex
, "processes") == 0)
4601 else if (strcmp (annex
, "threads") == 0)
4606 if (!readbuf
|| writebuf
)
4611 if (len_avail
!= -1 && len_avail
!= 0)
4612 buffer_free (&buffer
);
4615 buffer_init (&buffer
);
4617 buffer_grow_str (&buffer
, "<osdata type=\"processes\">");
4619 buffer_grow_str (&buffer
, "<osdata type=\"threads\">");
4621 dirp
= opendir ("/proc");
4625 while ((dp
= readdir (dirp
)) != NULL
)
4627 struct stat statbuf
;
4628 char procentry
[sizeof ("/proc/4294967295")];
4630 if (!isdigit (dp
->d_name
[0])
4631 || strlen (dp
->d_name
) > sizeof ("4294967295") - 1)
4634 sprintf (procentry
, "/proc/%s", dp
->d_name
);
4635 if (stat (procentry
, &statbuf
) == 0
4636 && S_ISDIR (statbuf
.st_mode
))
4638 int pid
= (int) strtoul (dp
->d_name
, NULL
, 10);
4642 struct passwd
*entry
= getpwuid (statbuf
.st_uid
);
4643 show_process (pid
, entry
? entry
->pw_name
: "?", &buffer
);
4647 list_threads (pid
, &buffer
, NULL
);
4654 buffer_grow_str0 (&buffer
, "</osdata>\n");
4655 buf
= buffer_finish (&buffer
);
4656 len_avail
= strlen (buf
);
4659 if (offset
>= len_avail
)
4661 /* Done. Get rid of the data. */
4662 buffer_free (&buffer
);
4668 if (len
> len_avail
- offset
)
4669 len
= len_avail
- offset
;
4670 memcpy (readbuf
, buf
+ offset
, len
);
4675 /* Convert a native/host siginfo object, into/from the siginfo in the
4676 layout of the inferiors' architecture. */
4679 siginfo_fixup (struct siginfo
*siginfo
, void *inf_siginfo
, int direction
)
4683 if (the_low_target
.siginfo_fixup
!= NULL
)
4684 done
= the_low_target
.siginfo_fixup (siginfo
, inf_siginfo
, direction
);
4686 /* If there was no callback, or the callback didn't do anything,
4687 then just do a straight memcpy. */
4691 memcpy (siginfo
, inf_siginfo
, sizeof (struct siginfo
));
4693 memcpy (inf_siginfo
, siginfo
, sizeof (struct siginfo
));
4698 linux_xfer_siginfo (const char *annex
, unsigned char *readbuf
,
4699 unsigned const char *writebuf
, CORE_ADDR offset
, int len
)
4702 struct siginfo siginfo
;
4703 char inf_siginfo
[sizeof (struct siginfo
)];
4705 if (current_inferior
== NULL
)
4708 pid
= lwpid_of (get_thread_lwp (current_inferior
));
4711 fprintf (stderr
, "%s siginfo for lwp %d.\n",
4712 readbuf
!= NULL
? "Reading" : "Writing",
4715 if (offset
> sizeof (siginfo
))
4718 if (ptrace (PTRACE_GETSIGINFO
, pid
, 0, &siginfo
) != 0)
4721 /* When GDBSERVER is built as a 64-bit application, ptrace writes into
4722 SIGINFO an object with 64-bit layout. Since debugging a 32-bit
4723 inferior with a 64-bit GDBSERVER should look the same as debugging it
4724 with a 32-bit GDBSERVER, we need to convert it. */
4725 siginfo_fixup (&siginfo
, inf_siginfo
, 0);
4727 if (offset
+ len
> sizeof (siginfo
))
4728 len
= sizeof (siginfo
) - offset
;
4730 if (readbuf
!= NULL
)
4731 memcpy (readbuf
, inf_siginfo
+ offset
, len
);
4734 memcpy (inf_siginfo
+ offset
, writebuf
, len
);
4736 /* Convert back to ptrace layout before flushing it out. */
4737 siginfo_fixup (&siginfo
, inf_siginfo
, 1);
4739 if (ptrace (PTRACE_SETSIGINFO
, pid
, 0, &siginfo
) != 0)
4746 /* SIGCHLD handler that serves two purposes: In non-stop/async mode,
4747 so we notice when children change state; as the handler for the
4748 sigsuspend in my_waitpid. */
4751 sigchld_handler (int signo
)
4753 int old_errno
= errno
;
4759 /* fprintf is not async-signal-safe, so call write
4761 if (write (2, "sigchld_handler\n",
4762 sizeof ("sigchld_handler\n") - 1) < 0)
4763 break; /* just ignore */
4767 if (target_is_async_p ())
4768 async_file_mark (); /* trigger a linux_wait */
4774 linux_supports_non_stop (void)
4780 linux_async (int enable
)
4782 int previous
= (linux_event_pipe
[0] != -1);
4785 fprintf (stderr
, "linux_async (%d), previous=%d\n",
4788 if (previous
!= enable
)
4791 sigemptyset (&mask
);
4792 sigaddset (&mask
, SIGCHLD
);
4794 sigprocmask (SIG_BLOCK
, &mask
, NULL
);
4798 if (pipe (linux_event_pipe
) == -1)
4799 fatal ("creating event pipe failed.");
4801 fcntl (linux_event_pipe
[0], F_SETFL
, O_NONBLOCK
);
4802 fcntl (linux_event_pipe
[1], F_SETFL
, O_NONBLOCK
);
4804 /* Register the event loop handler. */
4805 add_file_handler (linux_event_pipe
[0],
4806 handle_target_event
, NULL
);
4808 /* Always trigger a linux_wait. */
4813 delete_file_handler (linux_event_pipe
[0]);
4815 close (linux_event_pipe
[0]);
4816 close (linux_event_pipe
[1]);
4817 linux_event_pipe
[0] = -1;
4818 linux_event_pipe
[1] = -1;
4821 sigprocmask (SIG_UNBLOCK
, &mask
, NULL
);
4828 linux_start_non_stop (int nonstop
)
4830 /* Register or unregister from event-loop accordingly. */
4831 linux_async (nonstop
);
4836 linux_supports_multi_process (void)
4842 /* Enumerate spufs IDs for process PID. */
4844 spu_enumerate_spu_ids (long pid
, unsigned char *buf
, CORE_ADDR offset
, int len
)
4850 struct dirent
*entry
;
4852 sprintf (path
, "/proc/%ld/fd", pid
);
4853 dir
= opendir (path
);
4858 while ((entry
= readdir (dir
)) != NULL
)
4864 fd
= atoi (entry
->d_name
);
4868 sprintf (path
, "/proc/%ld/fd/%d", pid
, fd
);
4869 if (stat (path
, &st
) != 0)
4871 if (!S_ISDIR (st
.st_mode
))
4874 if (statfs (path
, &stfs
) != 0)
4876 if (stfs
.f_type
!= SPUFS_MAGIC
)
4879 if (pos
>= offset
&& pos
+ 4 <= offset
+ len
)
4881 *(unsigned int *)(buf
+ pos
- offset
) = fd
;
4891 /* Implements the to_xfer_partial interface for the TARGET_OBJECT_SPU
4892 object type, using the /proc file system. */
4894 linux_qxfer_spu (const char *annex
, unsigned char *readbuf
,
4895 unsigned const char *writebuf
,
4896 CORE_ADDR offset
, int len
)
4898 long pid
= lwpid_of (get_thread_lwp (current_inferior
));
4903 if (!writebuf
&& !readbuf
)
4911 return spu_enumerate_spu_ids (pid
, readbuf
, offset
, len
);
4914 sprintf (buf
, "/proc/%ld/fd/%s", pid
, annex
);
4915 fd
= open (buf
, writebuf
? O_WRONLY
: O_RDONLY
);
4920 && lseek (fd
, (off_t
) offset
, SEEK_SET
) != (off_t
) offset
)
4927 ret
= write (fd
, writebuf
, (size_t) len
);
4929 ret
= read (fd
, readbuf
, (size_t) len
);
4936 linux_core_of_thread (ptid_t ptid
)
4938 char filename
[sizeof ("/proc//task//stat")
4939 + 2 * 20 /* decimal digits for 2 numbers, max 2^64 bit each */
4942 char *content
= NULL
;
4945 int content_read
= 0;
4949 sprintf (filename
, "/proc/%d/task/%ld/stat",
4950 ptid_get_pid (ptid
), ptid_get_lwp (ptid
));
4951 f
= fopen (filename
, "r");
4958 content
= realloc (content
, content_read
+ 1024);
4959 n
= fread (content
+ content_read
, 1, 1024, f
);
4963 content
[content_read
] = '\0';
4968 p
= strchr (content
, '(');
4972 p
= strchr (p
, ')');
4976 /* If the first field after program name has index 0, then core number is
4977 the field with index 36. There's no constant for that anywhere. */
4979 p
= strtok_r (p
, " ", &ts
);
4980 for (i
= 0; p
!= NULL
&& i
!= 36; ++i
)
4981 p
= strtok_r (NULL
, " ", &ts
);
4983 if (p
== NULL
|| sscanf (p
, "%d", &core
) == 0)
4993 linux_process_qsupported (const char *query
)
4995 if (the_low_target
.process_qsupported
!= NULL
)
4996 the_low_target
.process_qsupported (query
);
5000 linux_supports_tracepoints (void)
5002 if (*the_low_target
.supports_tracepoints
== NULL
)
5005 return (*the_low_target
.supports_tracepoints
) ();
5009 linux_read_pc (struct regcache
*regcache
)
5011 if (the_low_target
.get_pc
== NULL
)
5014 return (*the_low_target
.get_pc
) (regcache
);
5018 linux_write_pc (struct regcache
*regcache
, CORE_ADDR pc
)
5020 gdb_assert (the_low_target
.set_pc
!= NULL
);
5022 (*the_low_target
.set_pc
) (regcache
, pc
);
5026 linux_thread_stopped (struct thread_info
*thread
)
5028 return get_thread_lwp (thread
)->stopped
;
5031 /* This exposes stop-all-threads functionality to other modules. */
5034 linux_pause_all (int freeze
)
5036 stop_all_lwps (freeze
, NULL
);
5039 /* This exposes unstop-all-threads functionality to other gdbserver
5043 linux_unpause_all (int unfreeze
)
5045 unstop_all_lwps (unfreeze
, NULL
);
5049 linux_prepare_to_access_memory (void)
5051 /* Neither ptrace nor /proc/PID/mem allow accessing memory through a
5054 linux_pause_all (1);
5059 linux_done_accessing_memory (void)
5061 /* Neither ptrace nor /proc/PID/mem allow accessing memory through a
5064 linux_unpause_all (1);
5068 linux_install_fast_tracepoint_jump_pad (CORE_ADDR tpoint
, CORE_ADDR tpaddr
,
5069 CORE_ADDR collector
,
5072 CORE_ADDR
*jump_entry
,
5073 unsigned char *jjump_pad_insn
,
5074 ULONGEST
*jjump_pad_insn_size
,
5075 CORE_ADDR
*adjusted_insn_addr
,
5076 CORE_ADDR
*adjusted_insn_addr_end
)
5078 return (*the_low_target
.install_fast_tracepoint_jump_pad
)
5079 (tpoint
, tpaddr
, collector
, lockaddr
, orig_size
,
5080 jump_entry
, jjump_pad_insn
, jjump_pad_insn_size
,
5081 adjusted_insn_addr
, adjusted_insn_addr_end
);
5084 static struct emit_ops
*
5085 linux_emit_ops (void)
5087 if (the_low_target
.emit_ops
!= NULL
)
5088 return (*the_low_target
.emit_ops
) ();
5093 static struct target_ops linux_target_ops
= {
5094 linux_create_inferior
,
5103 linux_fetch_registers
,
5104 linux_store_registers
,
5105 linux_prepare_to_access_memory
,
5106 linux_done_accessing_memory
,
5109 linux_look_up_symbols
,
5110 linux_request_interrupt
,
5114 linux_stopped_by_watchpoint
,
5115 linux_stopped_data_address
,
5116 #if defined(__UCLIBC__) && defined(HAS_NOMMU)
5121 #ifdef USE_THREAD_DB
5122 thread_db_get_tls_address
,
5127 hostio_last_error_from_errno
,
5130 linux_supports_non_stop
,
5132 linux_start_non_stop
,
5133 linux_supports_multi_process
,
5134 #ifdef USE_THREAD_DB
5135 thread_db_handle_monitor_command
,
5139 linux_core_of_thread
,
5140 linux_process_qsupported
,
5141 linux_supports_tracepoints
,
5144 linux_thread_stopped
,
5148 linux_cancel_breakpoints
,
5149 linux_stabilize_threads
,
5150 linux_install_fast_tracepoint_jump_pad
,
5155 linux_init_signals ()
5157 /* FIXME drow/2002-06-09: As above, we should check with LinuxThreads
5158 to find what the cancel signal actually is. */
5159 #ifndef __ANDROID__ /* Bionic doesn't use SIGRTMIN the way glibc does. */
5160 signal (__SIGRTMIN
+1, SIG_IGN
);
5165 initialize_low (void)
5167 struct sigaction sigchld_action
;
5168 memset (&sigchld_action
, 0, sizeof (sigchld_action
));
5169 set_target_ops (&linux_target_ops
);
5170 set_breakpoint_data (the_low_target
.breakpoint
,
5171 the_low_target
.breakpoint_len
);
5172 linux_init_signals ();
5173 linux_test_for_tracefork ();
5174 #ifdef HAVE_LINUX_REGSETS
5175 for (num_regsets
= 0; target_regsets
[num_regsets
].size
>= 0; num_regsets
++)
5177 disabled_regsets
= xmalloc (num_regsets
);
5180 sigchld_action
.sa_handler
= sigchld_handler
;
5181 sigemptyset (&sigchld_action
.sa_mask
);
5182 sigchld_action
.sa_flags
= SA_RESTART
;
5183 sigaction (SIGCHLD
, &sigchld_action
, NULL
);