* i386-tdep.c: Add back _initialize_i386_tdep prototype with

[binutils-gdb.git] / gdb / i386-tdep.c

/* Intel 386 target-dependent stuff.
   Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
   1998, 1999, 2000, 2001
   Free Software Foundation, Inc.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 59 Temple Place - Suite 330,
   Boston, MA 02111-1307, USA.  */

#include "defs.h"
#include "gdb_string.h"
#include "frame.h"
#include "inferior.h"
#include "gdbcore.h"
#include "target.h"
#include "floatformat.h"
#include "symtab.h"
#include "gdbcmd.h"
#include "command.h"
#include "arch-utils.h"
#include "regcache.h"

/* i386_register_byte[i] is the offset into the register file of the
   start of register number i.  We initialize this from
   i386_register_raw_size.  */
int i386_register_byte[MAX_NUM_REGS];

/* i386_register_raw_size[i] is the number of bytes of storage in
   GDB's register array occupied by register i.  */
int i386_register_raw_size[MAX_NUM_REGS] = {
   4,  4,  4,  4,
   4,  4,  4,  4,
   4,  4,  4,  4,
   4,  4,  4,  4,
  10, 10, 10, 10,
  10, 10, 10, 10,
   4,  4,  4,  4,
   4,  4,  4,  4,
  16, 16, 16, 16,
  16, 16, 16, 16,
   4
};

/* i386_register_virtual_size[i] is the size in bytes of the virtual
   type of register i.  */
int i386_register_virtual_size[MAX_NUM_REGS];
\f

/* This is the variable that is set with "set disassembly-flavor", and
   its legitimate values.  */
static const char att_flavor[] = "att";
static const char intel_flavor[] = "intel";
static const char *valid_flavors[] =
{
  att_flavor,
  intel_flavor,
  NULL
};
static const char *disassembly_flavor = att_flavor;

/* This is used to keep the bfd arch_info in sync with the disassembly
   flavor.  */
static void set_disassembly_flavor_sfunc (char *, int,
                                          struct cmd_list_element *);
static void set_disassembly_flavor (void);
\f

/* Stdio style buffering was used to minimize calls to ptrace, but
   this buffering did not take into account that the code section
   being accessed may not be an even number of buffers long (even if
   the buffer is only sizeof(int) long).  In cases where the code
   section size happened to be a non-integral number of buffers long,
   attempting to read the last buffer would fail.  Simply using
   target_read_memory and ignoring errors, rather than read_memory, is
   not the correct solution, since legitimate access errors would then
   be totally ignored.  To properly handle this situation and continue
   to use buffering would require that this code be able to determine
   the minimum code section size granularity (not the alignment of the
   section itself, since the actual failing case that pointed out this
   problem had a section alignment of 4 but was not a multiple of 4
   bytes long), on a target by target basis, and then adjust it's
   buffer size accordingly.  This is messy, but potentially feasible.
   It probably needs the bfd library's help and support.  For now, the
   buffer size is set to 1.  (FIXME -fnf) */

#define CODESTREAM_BUFSIZ 1     /* Was sizeof(int), see note above.  */
static CORE_ADDR codestream_next_addr;
static CORE_ADDR codestream_addr;
static unsigned char codestream_buf[CODESTREAM_BUFSIZ];
static int codestream_off;
static int codestream_cnt;

#define codestream_tell() (codestream_addr + codestream_off)
#define codestream_peek() \
  (codestream_cnt == 0 ? \
   codestream_fill(1) : codestream_buf[codestream_off])
#define codestream_get() \
  (codestream_cnt-- == 0 ? \
   codestream_fill(0) : codestream_buf[codestream_off++])

static unsigned char
codestream_fill (int peek_flag)
{
  codestream_addr = codestream_next_addr;
  codestream_next_addr += CODESTREAM_BUFSIZ;
  codestream_off = 0;
  codestream_cnt = CODESTREAM_BUFSIZ;
  read_memory (codestream_addr, (char *) codestream_buf, CODESTREAM_BUFSIZ);

  if (peek_flag)
    return (codestream_peek ());
  else
    return (codestream_get ());
}

static void
codestream_seek (CORE_ADDR place)
{
  codestream_next_addr = place / CODESTREAM_BUFSIZ;
  codestream_next_addr *= CODESTREAM_BUFSIZ;
  codestream_cnt = 0;
  codestream_fill (1);
  while (codestream_tell () != place)
    codestream_get ();
}

static void
codestream_read (unsigned char *buf, int count)
{
  unsigned char *p;
  int i;
  p = buf;
  for (i = 0; i < count; i++)
    *p++ = codestream_get ();
}
\f

/* If the next instruction is a jump, move to its target.  */

static void
i386_follow_jump (void)
{
  unsigned char buf[4];
  long delta;

  int data16;
  CORE_ADDR pos;

  pos = codestream_tell ();

  data16 = 0;
  if (codestream_peek () == 0x66)
    {
      codestream_get ();
      data16 = 1;
    }

  switch (codestream_get ())
    {
    case 0xe9:
      /* Relative jump: if data16 == 0, disp32, else disp16.  */
      if (data16)
        {
          codestream_read (buf, 2);
          delta = extract_signed_integer (buf, 2);

          /* Include the size of the jmp instruction (including the
             0x66 prefix).  */
          pos += delta + 4;
        }
      else
        {
          codestream_read (buf, 4);
          delta = extract_signed_integer (buf, 4);

          pos += delta + 5;
        }
      break;
    case 0xeb:
      /* Relative jump, disp8 (ignore data16).  */
      codestream_read (buf, 1);
      /* Sign-extend it.  */
      delta = extract_signed_integer (buf, 1);

      pos += delta + 2;
      break;
    }
  codestream_seek (pos);
}

/* Find & return the amount a local space allocated, and advance the
   codestream to the first register push (if any).

   If the entry sequence doesn't make sense, return -1, and leave
   codestream pointer at a random spot.  */

static long
i386_get_frame_setup (CORE_ADDR pc)
{
  unsigned char op;

  codestream_seek (pc);

  i386_follow_jump ();

  op = codestream_get ();

  if (op == 0x58)               /* popl %eax */
    {
      /* This function must start with

            popl %eax             0x58
            xchgl %eax, (%esp)    0x87 0x04 0x24
         or xchgl %eax, 0(%esp)   0x87 0x44 0x24 0x00

         (the System V compiler puts out the second `xchg'
         instruction, and the assembler doesn't try to optimize it, so
         the 'sib' form gets generated).  This sequence is used to get
         the address of the return buffer for a function that returns
         a structure.  */
      int pos;
      unsigned char buf[4];
      static unsigned char proto1[3] = { 0x87, 0x04, 0x24 };
      static unsigned char proto2[4] = { 0x87, 0x44, 0x24, 0x00 };

      pos = codestream_tell ();
      codestream_read (buf, 4);
      if (memcmp (buf, proto1, 3) == 0)
        pos += 3;
      else if (memcmp (buf, proto2, 4) == 0)
        pos += 4;

      codestream_seek (pos);
      op = codestream_get ();   /* Update next opcode.  */
    }

  if (op == 0x68 || op == 0x6a)
    {
      /* This function may start with

            pushl constant
            call _probe
            addl $4, %esp
           
         followed by

            pushl %ebp

         etc.  */
      int pos;
      unsigned char buf[8];

      /* Skip past the `pushl' instruction; it has either a one-byte 
         or a four-byte operand, depending on the opcode.  */
      pos = codestream_tell ();
      if (op == 0x68)
        pos += 4;
      else
        pos += 1;
      codestream_seek (pos);

      /* Read the following 8 bytes, which should be "call _probe" (6
         bytes) followed by "addl $4,%esp" (2 bytes).  */
      codestream_read (buf, sizeof (buf));
      if (buf[0] == 0xe8 && buf[6] == 0xc4 && buf[7] == 0x4)
        pos += sizeof (buf);
      codestream_seek (pos);
      op = codestream_get ();   /* Update next opcode.  */
    }

  if (op == 0x55)               /* pushl %ebp */
    {
      /* Check for "movl %esp, %ebp" -- can be written in two ways.  */
      switch (codestream_get ())
        {
        case 0x8b:
          if (codestream_get () != 0xec)
            return -1;
          break;
        case 0x89:
          if (codestream_get () != 0xe5)
            return -1;
          break;
        default:
          return -1;
        }
      /* Check for stack adjustment 

           subl $XXX, %esp

         NOTE: You can't subtract a 16 bit immediate from a 32 bit
         reg, so we don't have to worry about a data16 prefix.  */
      op = codestream_peek ();
      if (op == 0x83)
        {
          /* `subl' with 8 bit immediate.  */
          codestream_get ();
          if (codestream_get () != 0xec)
            /* Some instruction starting with 0x83 other than `subl'.  */
            {
              codestream_seek (codestream_tell () - 2);
              return 0;
            }
          /* `subl' with signed byte immediate (though it wouldn't
             make sense to be negative).  */
          return (codestream_get ());
        }
      else if (op == 0x81)
        {
          char buf[4];
          /* Maybe it is `subl' with a 32 bit immedediate.  */
          codestream_get ();
          if (codestream_get () != 0xec)
            /* Some instruction starting with 0x81 other than `subl'.  */
            {
              codestream_seek (codestream_tell () - 2);
              return 0;
            }
          /* It is `subl' with a 32 bit immediate.  */
          codestream_read ((unsigned char *) buf, 4);
          return extract_signed_integer (buf, 4);
        }
      else
        {
          return 0;
        }
    }
  else if (op == 0xc8)
    {
      char buf[2];
      /* `enter' with 16 bit unsigned immediate.  */
      codestream_read ((unsigned char *) buf, 2);
      codestream_get ();        /* Flush final byte of enter instruction.  */
      return extract_unsigned_integer (buf, 2);
    }
  return (-1);
}

/* Return number of args passed to a frame.
   Can return -1, meaning no way to tell.  */

int
i386_frame_num_args (struct frame_info *fi)
{
#if 1
  return -1;
#else
  /* This loses because not only might the compiler not be popping the
     args right after the function call, it might be popping args from
     both this call and a previous one, and we would say there are
     more args than there really are.  */

  int retpc;
  unsigned char op;
  struct frame_info *pfi;

  /* On the i386, the instruction following the call could be:
     popl %ecx        -  one arg
     addl $imm, %esp  -  imm/4 args; imm may be 8 or 32 bits
     anything else    -  zero args.  */

  int frameless;

  frameless = FRAMELESS_FUNCTION_INVOCATION (fi);
  if (frameless)
    /* In the absence of a frame pointer, GDB doesn't get correct
       values for nameless arguments.  Return -1, so it doesn't print
       any nameless arguments.  */
    return -1;

  pfi = get_prev_frame (fi);
  if (pfi == 0)
    {
      /* NOTE: This can happen if we are looking at the frame for
         main, because FRAME_CHAIN_VALID won't let us go into start.
         If we have debugging symbols, that's not really a big deal;
         it just means it will only show as many arguments to main as
         are declared.  */
      return -1;
    }
  else
    {
      retpc = pfi->pc;
      op = read_memory_integer (retpc, 1);
      if (op == 0x59)           /* pop %ecx */
        return 1;
      else if (op == 0x83)
        {
          op = read_memory_integer (retpc + 1, 1);
          if (op == 0xc4)
            /* addl $<signed imm 8 bits>, %esp */
            return (read_memory_integer (retpc + 2, 1) & 0xff) / 4;
          else
            return 0;
        }
      else if (op == 0x81)      /* `add' with 32 bit immediate.  */
        {
          op = read_memory_integer (retpc + 1, 1);
          if (op == 0xc4)
            /* addl $<imm 32>, %esp */
            return read_memory_integer (retpc + 2, 4) / 4;
          else
            return 0;
        }
      else
        {
          return 0;
        }
    }
#endif
}

/* Parse the first few instructions the function to see what registers
   were stored.
   
   We handle these cases:

   The startup sequence can be at the start of the function, or the
   function can start with a branch to startup code at the end.

   %ebp can be set up with either the 'enter' instruction, or "pushl
   %ebp, movl %esp, %ebp" (`enter' is too slow to be useful, but was
   once used in the System V compiler).

   Local space is allocated just below the saved %ebp by either the
   'enter' instruction, or by "subl $<size>, %esp".  'enter' has a 16
   bit unsigned argument for space to allocate, and the 'addl'
   instruction could have either a signed byte, or 32 bit immediate.

   Next, the registers used by this function are pushed.  With the
   System V compiler they will always be in the order: %edi, %esi,
   %ebx (and sometimes a harmless bug causes it to also save but not
   restore %eax); however, the code below is willing to see the pushes
   in any order, and will handle up to 8 of them.
 
   If the setup sequence is at the end of the function, then the next
   instruction will be a branch back to the start.  */

void
i386_frame_init_saved_regs (struct frame_info *fip)
{
  long locals = -1;
  unsigned char op;
  CORE_ADDR dummy_bottom;
  CORE_ADDR addr;
  CORE_ADDR pc;
  int i;

  if (fip->saved_regs)
    return;

  frame_saved_regs_zalloc (fip);

  /* If the frame is the end of a dummy, compute where the beginning
     would be.  */
  dummy_bottom = fip->frame - 4 - REGISTER_BYTES - CALL_DUMMY_LENGTH;

  /* Check if the PC points in the stack, in a dummy frame.  */
  if (dummy_bottom <= fip->pc && fip->pc <= fip->frame)
    {
      /* All registers were saved by push_call_dummy.  */
      addr = fip->frame;
      for (i = 0; i < NUM_REGS; i++)
        {
          addr -= REGISTER_RAW_SIZE (i);
          fip->saved_regs[i] = addr;
        }
      return;
    }

  pc = get_pc_function_start (fip->pc);
  if (pc != 0)
    locals = i386_get_frame_setup (pc);

  if (locals >= 0)
    {
      addr = fip->frame - 4 - locals;
      for (i = 0; i < 8; i++)
        {
          op = codestream_get ();
          if (op < 0x50 || op > 0x57)
            break;
#ifdef I386_REGNO_TO_SYMMETRY
          /* Dynix uses different internal numbering.  Ick.  */
          fip->saved_regs[I386_REGNO_TO_SYMMETRY (op - 0x50)] = addr;
#else
          fip->saved_regs[op - 0x50] = addr;
#endif
          addr -= 4;
        }
    }

  fip->saved_regs[PC_REGNUM] = fip->frame + 4;
  fip->saved_regs[FP_REGNUM] = fip->frame;
}

/* Return PC of first real instruction.  */

int
i386_skip_prologue (int pc)
{
  unsigned char op;
  int i;
  static unsigned char pic_pat[6] =
  { 0xe8, 0, 0, 0, 0,           /* call   0x0 */
    0x5b,                       /* popl   %ebx */
  };
  CORE_ADDR pos;

  if (i386_get_frame_setup (pc) < 0)
    return (pc);

  /* Found valid frame setup -- codestream now points to start of push
     instructions for saving registers.  */

  /* Skip over register saves.  */
  for (i = 0; i < 8; i++)
    {
      op = codestream_peek ();
      /* Break if not `pushl' instrunction.  */
      if (op < 0x50 || op > 0x57)
        break;
      codestream_get ();
    }

  /* The native cc on SVR4 in -K PIC mode inserts the following code
     to get the address of the global offset table (GOT) into register
     %ebx
     
        call    0x0
        popl    %ebx
        movl    %ebx,x(%ebp)    (optional)
        addl    y,%ebx

     This code is with the rest of the prologue (at the end of the
     function), so we have to skip it to get to the first real
     instruction at the start of the function.  */

  pos = codestream_tell ();
  for (i = 0; i < 6; i++)
    {
      op = codestream_get ();
      if (pic_pat[i] != op)
        break;
    }
  if (i == 6)
    {
      unsigned char buf[4];
      long delta = 6;

      op = codestream_get ();
      if (op == 0x89)           /* movl %ebx, x(%ebp) */
        {
          op = codestream_get ();
          if (op == 0x5d)       /* One byte offset from %ebp.  */
            {
              delta += 3;
              codestream_read (buf, 1);
            }
          else if (op == 0x9d)  /* Four byte offset from %ebp.  */
            {
              delta += 6;
              codestream_read (buf, 4);
            }
          else                  /* Unexpected instruction.  */
            delta = -1;
          op = codestream_get ();
        }
      /* addl y,%ebx */
      if (delta > 0 && op == 0x81 && codestream_get () == 0xc3)
        {
          pos += delta + 6;
        }
    }
  codestream_seek (pos);

  i386_follow_jump ();

  return (codestream_tell ());
}

void
i386_push_dummy_frame (void)
{
  CORE_ADDR sp = read_register (SP_REGNUM);
  int regnum;
  char regbuf[MAX_REGISTER_RAW_SIZE];

  sp = push_word (sp, read_register (PC_REGNUM));
  sp = push_word (sp, read_register (FP_REGNUM));
  write_register (FP_REGNUM, sp);
  for (regnum = 0; regnum < NUM_REGS; regnum++)
    {
      read_register_gen (regnum, regbuf);
      sp = push_bytes (sp, regbuf, REGISTER_RAW_SIZE (regnum));
    }
  write_register (SP_REGNUM, sp);
}

/* Insert the (relative) function address into the call sequence
   stored at DYMMY.  */

void
i386_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs,
                     value_ptr *args, struct type *type, int gcc_p)
{
  int from, to, delta, loc;

  loc = (int)(read_register (SP_REGNUM) - CALL_DUMMY_LENGTH);
  from = loc + 5;
  to = (int)(fun);
  delta = to - from;

  *((char *)(dummy) + 1) = (delta & 0xff);
  *((char *)(dummy) + 2) = ((delta >> 8) & 0xff);
  *((char *)(dummy) + 3) = ((delta >> 16) & 0xff);
  *((char *)(dummy) + 4) = ((delta >> 24) & 0xff);
}

void
i386_pop_frame (void)
{
  struct frame_info *frame = get_current_frame ();
  CORE_ADDR fp;
  int regnum;
  char regbuf[MAX_REGISTER_RAW_SIZE];

  fp = FRAME_FP (frame);
  i386_frame_init_saved_regs (frame);

  for (regnum = 0; regnum < NUM_REGS; regnum++)
    {
      CORE_ADDR addr;
      addr = frame->saved_regs[regnum];
      if (addr)
        {
          read_memory (addr, regbuf, REGISTER_RAW_SIZE (regnum));
          write_register_bytes (REGISTER_BYTE (regnum), regbuf,
                                REGISTER_RAW_SIZE (regnum));
        }
    }
  write_register (FP_REGNUM, read_memory_integer (fp, 4));
  write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));
  write_register (SP_REGNUM, fp + 8);
  flush_cached_frames ();
}
\f

#ifdef GET_LONGJMP_TARGET

/* Figure out where the longjmp will land.  Slurp the args out of the
   stack.  We expect the first arg to be a pointer to the jmp_buf
   structure from which we extract the pc (JB_PC) that we will land
   at.  The pc is copied into PC.  This routine returns true on
   success.  */

int
get_longjmp_target (CORE_ADDR *pc)
{
  char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
  CORE_ADDR sp, jb_addr;

  sp = read_register (SP_REGNUM);

  if (target_read_memory (sp + SP_ARG0, /* Offset of first arg on stack.  */
                          buf,
                          TARGET_PTR_BIT / TARGET_CHAR_BIT))
    return 0;

  jb_addr = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);

  if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
                          TARGET_PTR_BIT / TARGET_CHAR_BIT))
    return 0;

  *pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);

  return 1;
}

#endif /* GET_LONGJMP_TARGET */
\f

/* These registers are used for returning integers (and on some
   targets also for returning `struct' and `union' values when their
   size and alignment match an integer type).  */
#define LOW_RETURN_REGNUM 0     /* %eax */
#define HIGH_RETURN_REGNUM 2    /* %edx */

/* Extract from an array REGBUF containing the (raw) register state, a
   function return value of TYPE, and copy that, in virtual format,
   into VALBUF.  */

void
i386_extract_return_value (struct type *type, char *regbuf, char *valbuf)
{
  int len = TYPE_LENGTH (type);

  if (TYPE_CODE_FLT == TYPE_CODE (type))
    {
      if (NUM_FREGS == 0)
        {
          warning ("Cannot find floating-point return value.");
          memset (valbuf, 0, len);
          return;
        }

      /* Floating-point return values can be found in %st(0).  */
      if (len == TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT
          && TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext)
        {
          /* Copy straight over, but take care of the padding.  */
          memcpy (valbuf, &regbuf[REGISTER_BYTE (FP0_REGNUM)],
                  FPU_REG_RAW_SIZE);
          memset (valbuf + FPU_REG_RAW_SIZE, 0, len - FPU_REG_RAW_SIZE);
        }
      else
        {
          /* Convert the extended floating-point number found in
             %st(0) to the desired type.  This is probably not exactly
             how it would happen on the target itself, but it is the
             best we can do.  */
          DOUBLEST val;
          floatformat_to_doublest (&floatformat_i387_ext,
                                   &regbuf[REGISTER_BYTE (FP0_REGNUM)], &val);
          store_floating (valbuf, TYPE_LENGTH (type), val);
        }
    }
  else
    {
      int low_size = REGISTER_RAW_SIZE (LOW_RETURN_REGNUM);
      int high_size = REGISTER_RAW_SIZE (HIGH_RETURN_REGNUM);

      if (len <= low_size)
        memcpy (valbuf, &regbuf[REGISTER_BYTE (LOW_RETURN_REGNUM)], len);
      else if (len <= (low_size + high_size))
        {
          memcpy (valbuf,
                  &regbuf[REGISTER_BYTE (LOW_RETURN_REGNUM)], low_size);
          memcpy (valbuf + low_size,
                  &regbuf[REGISTER_BYTE (HIGH_RETURN_REGNUM)], len - low_size);
        }
      else
        internal_error (__FILE__, __LINE__,
                        "Cannot extract return value of %d bytes long.", len);
    }
}

/* Write into the appropriate registers a function return value stored
   in VALBUF of type TYPE, given in virtual format.  */

void
i386_store_return_value (struct type *type, char *valbuf)
{
  int len = TYPE_LENGTH (type);

  if (TYPE_CODE_FLT == TYPE_CODE (type))
    {
      if (NUM_FREGS == 0)
        {
          warning ("Cannot set floating-point return value.");
          return;
        }

      /* Floating-point return values can be found in %st(0).  */
      if (len == TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT
          && TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext)
        {
          /* Copy straight over.  */
          write_register_bytes (REGISTER_BYTE (FP0_REGNUM), valbuf,
                                FPU_REG_RAW_SIZE);
        }
      else
        {
          char buf[FPU_REG_RAW_SIZE];
          DOUBLEST val;

          /* Convert the value found in VALBUF to the extended
             floating point format used by the FPU.  This is probably
             not exactly how it would happen on the target itself, but
             it is the best we can do.  */
          val = extract_floating (valbuf, TYPE_LENGTH (type));
          floatformat_from_doublest (&floatformat_i387_ext, &val, buf);
          write_register_bytes (REGISTER_BYTE (FP0_REGNUM), buf,
                                FPU_REG_RAW_SIZE);
        }
    }
  else
    {
      int low_size = REGISTER_RAW_SIZE (LOW_RETURN_REGNUM);
      int high_size = REGISTER_RAW_SIZE (HIGH_RETURN_REGNUM);

      if (len <= low_size)
        write_register_bytes (REGISTER_BYTE (LOW_RETURN_REGNUM), valbuf, len);
      else if (len <= (low_size + high_size))
        {
          write_register_bytes (REGISTER_BYTE (LOW_RETURN_REGNUM),
                                valbuf, low_size);
          write_register_bytes (REGISTER_BYTE (HIGH_RETURN_REGNUM),
                                valbuf + low_size, len - low_size);
        }
      else
        internal_error (__FILE__, __LINE__,
                        "Cannot store return value of %d bytes long.", len);
    }
}
\f

/* Convert data from raw format for register REGNUM in buffer FROM to
   virtual format with type TYPE in buffer TO.  In principle both
   formats are identical except that the virtual format has two extra
   bytes appended that aren't used.  We set these to zero.  */

void
i386_register_convert_to_virtual (int regnum, struct type *type,
                                  char *from, char *to)
{
  /* Copy straight over, but take care of the padding.  */
  memcpy (to, from, FPU_REG_RAW_SIZE);
  memset (to + FPU_REG_RAW_SIZE, 0, TYPE_LENGTH (type) - FPU_REG_RAW_SIZE);
}

/* Convert data from virtual format with type TYPE in buffer FROM to
   raw format for register REGNUM in buffer TO.  Simply omit the two
   unused bytes.  */

void
i386_register_convert_to_raw (struct type *type, int regnum,
                              char *from, char *to)
{
  memcpy (to, from, FPU_REG_RAW_SIZE);
}
\f     

#ifdef I386V4_SIGTRAMP_SAVED_PC
/* Get saved user PC for sigtramp from the pushed ucontext on the
   stack for all three variants of SVR4 sigtramps.  */

CORE_ADDR
i386v4_sigtramp_saved_pc (struct frame_info *frame)
{
  CORE_ADDR saved_pc_offset = 4;
  char *name = NULL;

  find_pc_partial_function (frame->pc, &name, NULL, NULL);
  if (name)
    {
      if (STREQ (name, "_sigreturn"))
        saved_pc_offset = 132 + 14 * 4;
      else if (STREQ (name, "_sigacthandler"))
        saved_pc_offset = 80 + 14 * 4;
      else if (STREQ (name, "sigvechandler"))
        saved_pc_offset = 120 + 14 * 4;
    }

  if (frame->next)
    return read_memory_integer (frame->next->frame + saved_pc_offset, 4);
  return read_memory_integer (read_register (SP_REGNUM) + saved_pc_offset, 4);
}
#endif /* I386V4_SIGTRAMP_SAVED_PC */
\f

#ifdef STATIC_TRANSFORM_NAME
/* SunPRO encodes the static variables.  This is not related to C++
   mangling, it is done for C too.  */

char *
sunpro_static_transform_name (char *name)
{
  char *p;
  if (IS_STATIC_TRANSFORM_NAME (name))
    {
      /* For file-local statics there will be a period, a bunch of
         junk (the contents of which match a string given in the
         N_OPT), a period and the name.  For function-local statics
         there will be a bunch of junk (which seems to change the
         second character from 'A' to 'B'), a period, the name of the
         function, and the name.  So just skip everything before the
         last period.  */
      p = strrchr (name, '.');
      if (p != NULL)
        name = p + 1;
    }
  return name;
}
#endif /* STATIC_TRANSFORM_NAME */
\f

/* Stuff for WIN32 PE style DLL's but is pretty generic really.  */

CORE_ADDR
skip_trampoline_code (CORE_ADDR pc, char *name)
{
  if (pc && read_memory_unsigned_integer (pc, 2) == 0x25ff) /* jmp *(dest) */
    {
      unsigned long indirect = read_memory_unsigned_integer (pc + 2, 4);
      struct minimal_symbol *indsym =
        indirect ? lookup_minimal_symbol_by_pc (indirect) : 0;
      char *symname = indsym ? SYMBOL_NAME (indsym) : 0;

      if (symname)
        {
          if (strncmp (symname, "__imp_", 6) == 0
              || strncmp (symname, "_imp_", 5) == 0)
            return name ? 1 : read_memory_unsigned_integer (indirect, 4);
        }
    }
  return 0;                     /* Not a trampoline.  */
}
\f

/* We have two flavours of disassembly.  The machinery on this page
   deals with switching between those.  */

static int
gdb_print_insn_i386 (bfd_vma memaddr, disassemble_info *info)
{
  if (disassembly_flavor == att_flavor)
    return print_insn_i386_att (memaddr, info);
  else if (disassembly_flavor == intel_flavor)
    return print_insn_i386_intel (memaddr, info);
  /* Never reached -- disassembly_flavour is always either att_flavor
     or intel_flavor.  */
  internal_error (__FILE__, __LINE__, "failed internal consistency check");
}

/* If the disassembly mode is intel, we have to also switch the bfd
   mach_type.  This function is run in the set disassembly_flavor
   command, and does that.  */

static void
set_disassembly_flavor_sfunc (char *args, int from_tty,
                              struct cmd_list_element *c)
{
  set_disassembly_flavor ();
}

static void
set_disassembly_flavor (void)
{
  if (disassembly_flavor == att_flavor)
    set_architecture_from_arch_mach (bfd_arch_i386, bfd_mach_i386_i386);
  else if (disassembly_flavor == intel_flavor)
    set_architecture_from_arch_mach (bfd_arch_i386,
                                     bfd_mach_i386_i386_intel_syntax);
}
\f

/* Provide a prototype to silence -Wmissing-prototypes.  */
void _initialize_i386_tdep (void);

void
_initialize_i386_tdep (void)
{
  /* Initialize the table saying where each register starts in the
     register file.  */
  {
    int i, offset;

    offset = 0;
    for (i = 0; i < MAX_NUM_REGS; i++)
      {
        i386_register_byte[i] = offset;
        offset += i386_register_raw_size[i];
      }
  }

  /* Initialize the table of virtual register sizes.  */
  {
    int i;

    for (i = 0; i < MAX_NUM_REGS; i++)
      i386_register_virtual_size[i] = TYPE_LENGTH (REGISTER_VIRTUAL_TYPE (i));
  }

  tm_print_insn = gdb_print_insn_i386;
  tm_print_insn_info.mach = bfd_lookup_arch (bfd_arch_i386, 0)->mach;

  /* Add the variable that controls the disassembly flavor.  */
  {
    struct cmd_list_element *new_cmd;

    new_cmd = add_set_enum_cmd ("disassembly-flavor", no_class,
                                valid_flavors,
                                &disassembly_flavor,
                                "\
Set the disassembly flavor, the valid values are \"att\" and \"intel\", \
and the default value is \"att\".",
                                &setlist);
    new_cmd->function.sfunc = set_disassembly_flavor_sfunc;
    add_show_from_set (new_cmd, &showlist);
  }

  /* Finally, initialize the disassembly flavor to the default given
     in the disassembly_flavor variable.  */
  set_disassembly_flavor ();
}