gdb/inferior.h

   1 /* Variables that describe the inferior process running under GDB:
   2    Where it is, why it stopped, and how to step it.
   3    Copyright 1986, 1989, 1992, 1996, 1998 Free Software Foundation, Inc.
   4
   5    This file is part of GDB.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 2 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 59 Temple Place - Suite 330,
  20    Boston, MA 02111-1307, USA.  */
  21
  22 #if !defined (INFERIOR_H)
  23 #define INFERIOR_H 1
  24
  25 /* For bpstat.  */
  26 #include "breakpoint.h"
  27
  28 /* For enum target_signal.  */
  29 #include "target.h"
  30
  31 /* Structure in which to save the status of the inferior.  Create/Save
  32    through "save_inferior_status", restore through
  33    "restore_inferior_status".
  34
  35    This pair of routines should be called around any transfer of
  36    control to the inferior which you don't want showing up in your
  37    control variables.  */
  38
  39 struct inferior_status;
  40
  41 extern struct inferior_status *save_inferior_status (int);
  42
  43 extern void restore_inferior_status (struct inferior_status *);
  44
  45 extern struct cleanup *make_cleanup_restore_inferior_status (struct inferior_status *);
  46
  47 extern void discard_inferior_status (struct inferior_status *);
  48
  49 extern void write_inferior_status_register (struct inferior_status
  50                                             *inf_status, int regno,
  51                                             LONGEST val);
  52
  53 /* This macro gives the number of registers actually in use by the
  54    inferior.  This may be less than the total number of registers,
  55    perhaps depending on the actual CPU in use or program being run.
  56    FIXME: This could be replaced by the new MULTI_ARCH capability.  */
  57
  58 #ifndef ARCH_NUM_REGS
  59 #define ARCH_NUM_REGS NUM_REGS
  60 #endif
  61
  62 extern void set_sigint_trap (void);
  63
  64 extern void clear_sigint_trap (void);
  65
  66 extern void set_sigio_trap (void);
  67
  68 extern void clear_sigio_trap (void);
  69
  70 /* File name for default use for standard in/out in the inferior.  */
  71
  72 extern char *inferior_io_terminal;
  73
  74 /* Pid of our debugged inferior, or 0 if no inferior now.  */
  75
  76 extern int inferior_pid;
  77
  78 /* Is the inferior running right now, as a result of a 'run&',
  79    'continue&' etc command? This is used in asycn gdb to determine
  80    whether a command that the user enters while the target is running
  81    is allowed or not. */
  82 extern int target_executing;
  83
  84 /* Are we simulating synchronous execution? This is used in async gdb
  85    to implement the 'run', 'continue' etc commands, which will not
  86    redisplay the prompt until the execution is actually over. */
  87 extern int sync_execution;
  88
  89 /* This is only valid when inferior_pid is non-zero.
  90
  91    If this is 0, then exec events should be noticed and responded to
  92    by the debugger (i.e., be reported to the user).
  93
  94    If this is > 0, then that many subsequent exec events should be
  95    ignored (i.e., not be reported to the user).
  96  */
  97 extern int inferior_ignoring_startup_exec_events;
  98
  99 /* This is only valid when inferior_ignoring_startup_exec_events is
 100    zero.
 101
 102    Some targets (stupidly) report more than one exec event per actual
 103    call to an event() system call.  If only the last such exec event
 104    need actually be noticed and responded to by the debugger (i.e.,
 105    be reported to the user), then this is the number of "leading"
 106    exec events which should be ignored.
 107  */
 108 extern int inferior_ignoring_leading_exec_events;
 109
 110 /* Inferior environment. */
 111
 112 extern struct environ *inferior_environ;
 113
 114 /* Character array containing an image of the inferior programs'
 115    registers. */
 116
 117 extern char *registers;
 118
 119 /* Character array containing the current state of each register
 120    (unavailable<0, valid=0, invalid>0). */
 121
 122 extern signed char *register_valid;
 123
 124 extern void clear_proceed_status (void);
 125
 126 extern void proceed (CORE_ADDR, enum target_signal, int);
 127
 128 /* When set, stop the 'step' command if we enter a function which has
 129    no line number information.  The normal behavior is that we step
 130    over such function.  */
 131 extern int step_stop_if_no_debug;
 132
 133 extern void kill_inferior (void);
 134
 135 extern void generic_mourn_inferior (void);
 136
 137 extern void terminal_ours (void);
 138
 139 extern int run_stack_dummy (CORE_ADDR, char *);
 140
 141 extern CORE_ADDR read_pc (void);
 142
 143 extern CORE_ADDR read_pc_pid (int);
 144
 145 extern CORE_ADDR generic_target_read_pc (int);
 146
 147 extern void write_pc (CORE_ADDR);
 148
 149 extern void write_pc_pid (CORE_ADDR, int);
 150
 151 extern void generic_target_write_pc (CORE_ADDR, int);
 152
 153 extern CORE_ADDR read_sp (void);
 154
 155 extern CORE_ADDR generic_target_read_sp (void);
 156
 157 extern void write_sp (CORE_ADDR);
 158
 159 extern void generic_target_write_sp (CORE_ADDR);
 160
 161 extern CORE_ADDR read_fp (void);
 162
 163 extern CORE_ADDR generic_target_read_fp (void);
 164
 165 extern void write_fp (CORE_ADDR);
 166
 167 extern void generic_target_write_fp (CORE_ADDR);
 168
 169 extern CORE_ADDR unsigned_pointer_to_address (struct type *type, void *buf);
 170
 171 extern void unsigned_address_to_pointer (struct type *type, void *buf,
 172                                          CORE_ADDR addr);
 173 extern CORE_ADDR signed_pointer_to_address (struct type *type, void *buf);
 174 extern void address_to_signed_pointer (struct type *type, void *buf,
 175                                        CORE_ADDR addr);
 176
 177 extern void wait_for_inferior (void);
 178
 179 extern void fetch_inferior_event (void *);
 180
 181 extern void init_wait_for_inferior (void);
 182
 183 extern void close_exec_file (void);
 184
 185 extern void reopen_exec_file (void);
 186
 187 /* The `resume' routine should only be called in special circumstances.
 188    Normally, use `proceed', which handles a lot of bookkeeping.  */
 189
 190 extern void resume (int, enum target_signal);
 191
 192 /* From misc files */
 193
 194 extern void do_registers_info (int, int);
 195
 196 extern void store_inferior_registers (int);
 197
 198 extern void fetch_inferior_registers (int);
 199
 200 extern void solib_create_inferior_hook (void);
 201
 202 extern void child_terminal_info (char *, int);
 203
 204 extern void term_info (char *, int);
 205
 206 extern void terminal_ours_for_output (void);
 207
 208 extern void terminal_inferior (void);
 209
 210 extern void terminal_init_inferior (void);
 211
 212 extern void terminal_init_inferior_with_pgrp (int pgrp);
 213
 214 /* From infptrace.c or infttrace.c */
 215
 216 extern int attach (int);
 217
 218 #if !defined(REQUIRE_ATTACH)
 219 #define REQUIRE_ATTACH attach
 220 #endif
 221
 222 #if !defined(REQUIRE_DETACH)
 223 #define REQUIRE_DETACH(pid,siggnal) detach (siggnal)
 224 #endif
 225
 226 extern void detach (int);
 227
 228 /* PTRACE method of waiting for inferior process.  */
 229 int ptrace_wait (int, int *);
 230
 231 extern void child_resume (int, int, enum target_signal);
 232
 233 #ifndef PTRACE_ARG3_TYPE
 234 #define PTRACE_ARG3_TYPE int    /* Correct definition for most systems. */
 235 #endif
 236
 237 extern int call_ptrace (int, int, PTRACE_ARG3_TYPE, int);
 238
 239 extern void pre_fork_inferior (void);
 240
 241 /* From procfs.c */
 242
 243 extern int proc_iterate_over_mappings (int (*)(int, CORE_ADDR));
 244
 245 extern int procfs_first_available (void);
 246
 247 /* From fork-child.c */
 248
 249 extern void fork_inferior (char *, char *, char **,
 250                            void (*)(void),
 251                            void (*)(int), void (*)(void), char *);
 252
 253
 254 extern void clone_and_follow_inferior (int, int *);
 255
 256 extern void startup_inferior (int);
 257
 258 /* From inflow.c */
 259
 260 extern void new_tty_prefork (char *);
 261
 262 extern int gdb_has_a_terminal (void);
 263
 264 /* From infrun.c */
 265
 266 extern void start_remote (void);
 267
 268 extern void normal_stop (void);
 269
 270 extern int signal_stop_state (int);
 271
 272 extern int signal_print_state (int);
 273
 274 extern int signal_pass_state (int);
 275
 276 extern int signal_stop_update (int, int);
 277
 278 extern int signal_print_update (int, int);
 279
 280 extern int signal_pass_update (int, int);
 281
 282 /* From infcmd.c */
 283
 284 extern void tty_command (char *, int);
 285
 286 extern void attach_command (char *, int);
 287
 288 extern char *get_inferior_arg (void);
 289
 290 extern char *set_inferior_arg (char *);
 291
 292 /* Last signal that the inferior received (why it stopped).  */
 293
 294 extern enum target_signal stop_signal;
 295
 296 /* Address at which inferior stopped.  */
 297
 298 extern CORE_ADDR stop_pc;
 299
 300 /* Chain containing status of breakpoint(s) that we have stopped at.  */
 301
 302 extern bpstat stop_bpstat;
 303
 304 /* Flag indicating that a command has proceeded the inferior past the
 305    current breakpoint.  */
 306
 307 extern int breakpoint_proceeded;
 308
 309 /* Nonzero if stopped due to a step command.  */
 310
 311 extern int stop_step;
 312
 313 /* Nonzero if stopped due to completion of a stack dummy routine.  */
 314
 315 extern int stop_stack_dummy;
 316
 317 /* Nonzero if program stopped due to a random (unexpected) signal in
 318    inferior process.  */
 319
 320 extern int stopped_by_random_signal;
 321
 322 /* Range to single step within.
 323    If this is nonzero, respond to a single-step signal
 324    by continuing to step if the pc is in this range.
 325
 326    If step_range_start and step_range_end are both 1, it means to step for
 327    a single instruction (FIXME: it might clean up wait_for_inferior in a
 328    minor way if this were changed to the address of the instruction and
 329    that address plus one.  But maybe not.).  */
 330
 331 extern CORE_ADDR step_range_start;      /* Inclusive */
 332 extern CORE_ADDR step_range_end;        /* Exclusive */
 333
 334 /* Stack frame address as of when stepping command was issued.
 335    This is how we know when we step into a subroutine call,
 336    and how to set the frame for the breakpoint used to step out.  */
 337
 338 extern CORE_ADDR step_frame_address;
 339
 340 /* Our notion of the current stack pointer.  */
 341
 342 extern CORE_ADDR step_sp;
 343
 344 /* 1 means step over all subroutine calls.
 345    -1 means step over calls to undebuggable functions.  */
 346
 347 enum step_over_calls_kind
 348   {
 349     STEP_OVER_NONE,
 350     STEP_OVER_ALL,
 351     STEP_OVER_UNDEBUGGABLE,
 352   } step_over_calls;
 353
 354 /* If stepping, nonzero means step count is > 1
 355    so don't print frame next time inferior stops
 356    if it stops due to stepping.  */
 357
 358 extern int step_multi;
 359
 360 /* Nonzero means expecting a trap and caller will handle it themselves.
 361    It is used after attach, due to attaching to a process;
 362    when running in the shell before the child program has been exec'd;
 363    and when running some kinds of remote stuff (FIXME?).  */
 364
 365 extern int stop_soon_quietly;
 366
 367 /* Nonzero if proceed is being used for a "finish" command or a similar
 368    situation when stop_registers should be saved.  */
 369
 370 extern int proceed_to_finish;
 371
 372 /* Save register contents here when about to pop a stack dummy frame,
 373    if-and-only-if proceed_to_finish is set.
 374    Thus this contains the return value from the called function (assuming
 375    values are returned in a register).  */
 376
 377 extern char *stop_registers;
 378
 379 /* Nonzero if the child process in inferior_pid was attached rather
 380    than forked.  */
 381
 382 extern int attach_flag;
 383 \f
 384 /* Sigtramp is a routine that the kernel calls (which then calls the
 385    signal handler).  On most machines it is a library routine that
 386    is linked into the executable.
 387
 388    This macro, given a program counter value and the name of the
 389    function in which that PC resides (which can be null if the
 390    name is not known), returns nonzero if the PC and name show
 391    that we are in sigtramp.
 392
 393    On most machines just see if the name is sigtramp (and if we have
 394    no name, assume we are not in sigtramp).  */
 395 #if !defined (IN_SIGTRAMP)
 396 #if defined (SIGTRAMP_START)
 397 #define IN_SIGTRAMP(pc, name) \
 398        ((pc) >= SIGTRAMP_START(pc)   \
 399         && (pc) < SIGTRAMP_END(pc) \
 400         )
 401 #else
 402 #define IN_SIGTRAMP(pc, name) \
 403        (name && STREQ ("_sigtramp", name))
 404 #endif
 405 #endif
 406 \f
 407 /* Possible values for CALL_DUMMY_LOCATION.  */
 408 #define ON_STACK 1
 409 #define BEFORE_TEXT_END 2
 410 #define AFTER_TEXT_END 3
 411 #define AT_ENTRY_POINT 4
 412
 413 #if !defined (USE_GENERIC_DUMMY_FRAMES)
 414 #define USE_GENERIC_DUMMY_FRAMES 0
 415 #endif
 416
 417 #if !defined (CALL_DUMMY_LOCATION)
 418 #define CALL_DUMMY_LOCATION ON_STACK
 419 #endif /* No CALL_DUMMY_LOCATION.  */
 420
 421 #if !defined (CALL_DUMMY_ADDRESS)
 422 #define CALL_DUMMY_ADDRESS() (internal_error ("CALL_DUMMY_ADDRESS"), 0)
 423 #endif
 424 #if !defined (CALL_DUMMY_START_OFFSET)
 425 #define CALL_DUMMY_START_OFFSET (internal_error ("CALL_DUMMY_START_OFFSET"), 0)
 426 #endif
 427 #if !defined (CALL_DUMMY_BREAKPOINT_OFFSET)
 428 #define CALL_DUMMY_BREAKPOINT_OFFSET_P (0)
 429 #define CALL_DUMMY_BREAKPOINT_OFFSET (internal_error ("CALL_DUMMY_BREAKPOINT_OFFSET"), 0)
 430 #endif
 431 #if !defined CALL_DUMMY_BREAKPOINT_OFFSET_P
 432 #define CALL_DUMMY_BREAKPOINT_OFFSET_P (1)
 433 #endif
 434 #if !defined (CALL_DUMMY_LENGTH)
 435 #define CALL_DUMMY_LENGTH (internal_error ("CALL_DUMMY_LENGTH"), 0)
 436 #endif
 437
 438 #if defined (CALL_DUMMY_STACK_ADJUST)
 439 #if !defined (CALL_DUMMY_STACK_ADJUST_P)
 440 #define CALL_DUMMY_STACK_ADJUST_P (1)
 441 #endif
 442 #endif
 443 #if !defined (CALL_DUMMY_STACK_ADJUST)
 444 #define CALL_DUMMY_STACK_ADJUST (internal_error ("CALL_DUMMY_STACK_ADJUST"), 0)
 445 #endif
 446 #if !defined (CALL_DUMMY_STACK_ADJUST_P)
 447 #define CALL_DUMMY_STACK_ADJUST_P (0)
 448 #endif
 449
 450 /* FIXME: cagney/2000-04-17: gdbarch should manage this.  The default
 451    shouldn't be necessary. */
 452
 453 #if !defined (CALL_DUMMY_P)
 454 #if defined (CALL_DUMMY)
 455 #define CALL_DUMMY_P 1
 456 #else
 457 #define CALL_DUMMY_P 0
 458 #endif
 459 #endif
 460
 461 #if !defined PUSH_DUMMY_FRAME
 462 #define PUSH_DUMMY_FRAME (internal_error ("PUSH_DUMMY_FRAME"), 0)
 463 #endif
 464
 465 #if !defined FIX_CALL_DUMMY
 466 #define FIX_CALL_DUMMY(a1,a2,a3,a4,a5,a6,a7) (internal_error ("FIX_CALL_DUMMY"), 0)
 467 #endif
 468
 469 #if !defined STORE_STRUCT_RETURN
 470 #define STORE_STRUCT_RETURN(a1,a2) (internal_error ("STORE_STRUCT_RETURN"), 0)
 471 #endif
 472
 473
 474 /* Are we in a call dummy? */
 475
 476 extern int pc_in_call_dummy_before_text_end (CORE_ADDR pc, CORE_ADDR sp,
 477                                              CORE_ADDR frame_address);
 478 #if !GDB_MULTI_ARCH
 479 #if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == BEFORE_TEXT_END
 480 #define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_before_text_end (pc, sp, frame_address)
 481 #endif /* Before text_end.  */
 482 #endif
 483
 484 extern int pc_in_call_dummy_after_text_end (CORE_ADDR pc, CORE_ADDR sp,
 485                                             CORE_ADDR frame_address);
 486 #if !GDB_MULTI_ARCH
 487 #if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == AFTER_TEXT_END
 488 #define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_after_text_end (pc, sp, frame_address)
 489 #endif
 490 #endif
 491
 492 extern int pc_in_call_dummy_on_stack (CORE_ADDR pc, CORE_ADDR sp,
 493                                       CORE_ADDR frame_address);
 494 #if !GDB_MULTI_ARCH
 495 #if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == ON_STACK
 496 #define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_on_stack (pc, sp, frame_address)
 497 #endif
 498 #endif
 499
 500 extern int pc_in_call_dummy_at_entry_point (CORE_ADDR pc, CORE_ADDR sp,
 501                                             CORE_ADDR frame_address);
 502 #if !GDB_MULTI_ARCH
 503 #if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == AT_ENTRY_POINT
 504 #define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_at_entry_point (pc, sp, frame_address)
 505 #endif
 506 #endif
 507
 508 /* It's often not enough for our clients to know whether the PC is merely
 509    somewhere within the call dummy.  They may need to know whether the
 510    call dummy has actually completed.  (For example, wait_for_inferior
 511    wants to know when it should truly stop because the call dummy has
 512    completed.  If we're single-stepping because of slow watchpoints,
 513    then we may find ourselves stopped at the entry of the call dummy,
 514    and want to continue stepping until we reach the end.)
 515
 516    Note that this macro is intended for targets (like HP-UX) which
 517    require more than a single breakpoint in their call dummies, and
 518    therefore cannot use the CALL_DUMMY_BREAKPOINT_OFFSET mechanism.
 519
 520    If a target does define CALL_DUMMY_BREAKPOINT_OFFSET, then this
 521    default implementation of CALL_DUMMY_HAS_COMPLETED is sufficient.
 522    Else, a target may wish to supply an implementation that works in
 523    the presense of multiple breakpoints in its call dummy.
 524  */
 525 #if !defined(CALL_DUMMY_HAS_COMPLETED)
 526 #define CALL_DUMMY_HAS_COMPLETED(pc, sp, frame_address) \
 527   PC_IN_CALL_DUMMY((pc), (sp), (frame_address))
 528 #endif
 529
 530 /* If STARTUP_WITH_SHELL is set, GDB's "run"
 531    will attempts to start up the debugee under a shell.
 532    This is in order for argument-expansion to occur. E.g.,
 533    (gdb) run *
 534    The "*" gets expanded by the shell into a list of files.
 535    While this is a nice feature, it turns out to interact badly
 536    with some of the catch-fork/catch-exec features we have added.
 537    In particular, if the shell does any fork/exec's before
 538    the exec of the target program, that can confuse GDB.
 539    To disable this feature, set STARTUP_WITH_SHELL to 0.
 540    To enable this feature, set STARTUP_WITH_SHELL to 1.
 541    The catch-exec traps expected during start-up will
 542    be 1 if target is not started up with a shell, 2 if it is.
 543    - RT
 544    If you disable this, you need to decrement
 545    START_INFERIOR_TRAPS_EXPECTED in tm.h. */
 546 #define STARTUP_WITH_SHELL 1
 547 #if !defined(START_INFERIOR_TRAPS_EXPECTED)
 548 #define START_INFERIOR_TRAPS_EXPECTED   2
 549 #endif
 550 #endif /* !defined (INFERIOR_H) */