1 #Copyright 1989, 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 program_transform_name
=
22 exec_prefix = $(prefix)
23 bindir = $(exec_prefix)/bin
24 libdir = $(exec_prefix)/lib
25 tooldir
= $(libdir)/$(target_alias
)
27 datadir = $(prefix)/lib
28 mandir = $(prefix)/man
29 man1dir = $(mandir)/man1
30 man2dir = $(mandir)/man2
31 man3dir = $(mandir)/man3
32 man4dir = $(mandir)/man4
33 man5dir = $(mandir)/man5
34 man6dir = $(mandir)/man6
35 man7dir = $(mandir)/man7
36 man8dir = $(mandir)/man8
37 man9dir = $(mandir)/man9
38 infodir = $(prefix)/info
39 includedir = $(prefix)/include
40 docdir
= $(datadir)/doc
44 INSTALL
= `cd $(srcdir)/../..;pwd`/install.sh
-c
45 INSTALL_PROGRAM
= $(INSTALL
)
46 INSTALL_DATA
= $(INSTALL
)
47 INSTALL_XFORM
= $(INSTALL
) -t
='$(program_transform_name)'
48 INSTALL_XFORM1
= $(INSTALL_XFORM
) -b
=.1
51 if [ -f ../../gcc/xgcc ] ; then \
52 if [ -f ../../newlib/Makefile ] ; then \
53 echo ../../gcc/xgcc -B../../gcc/ -idirafter ../newlib/targ-include -idirafter $${rootsrc}/../newlib/libc/include -nostdinc -L../../../newlib -B../../../newlib/; \
55 echo ../../gcc/xgcc -B../../gcc/; \
58 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
61 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
65 NLMCONV_FOR_TARGET
= ` \
66 if [ -f ../../binutils/nlmconv ] ; then \
67 echo ../../binutils/nlmconv; \
69 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
72 t='$(program_transform_name)'; echo nlmconv | sed -e '' $$t; \
76 NWSOURCE
= /gaunt
/grossman
/unsupported
/Novell
77 NWINCLUDES
= -I
/gaunt
/grossman
/PPC-NETWARE
/ndk
/include
80 if [ -f ../../ld/ld.new ] ; then \
81 echo ../../ld/ld.new; \
83 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
86 t='$(program_transform_name)'; echo ld | sed -e '' $$t; \
94 # Flags that describe where you can find the termcap library.
95 # This can be overridden in the host Makefile fragment file.
98 # System V: If you compile gdb with a compiler which uses the coff
99 # encapsulation feature (this is a function of the compiler used, NOT
100 # of the m-?.h file selected by config.gdb), you must make sure that
101 # the GNU nm is the one that is used by munch.
103 # If you are compiling with GCC, make sure that either 1) You use the
104 # -traditional flag, or 2) You have the fixed include files where GCC
105 # can reach them. Otherwise the ioctl calls in inflow.c
106 # will be incorrectly compiled. The "fixincludes" script in the gcc
107 # distribution will fix your include files up.
112 # Directory containing source files. Don't clean up the spacing,
113 # this exact string is matched for by the "configure" script.
116 # It is also possible that you will need to add -I/usr/include/sys to the
117 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
118 # is where it should be according to Posix).
120 # If you use bison instead of yacc, it needs to include the "-y" argument.
125 # where to find texinfo; GDB dist should include a recent one
126 TEXIDIR
=${srcdir}/..
/texinfo
128 # where to find makeinfo, preferably one designed for texinfo-2
131 # Set this up with gcc if you have gnu ld and the loader will print out
132 # line numbers for undefinded refs.
136 # Where is the "include" directory? Traditionally ../include or ./include
137 INCLUDE_DIR
= ${srcdir}/..
/..
/include
138 INCLUDE_DEP
= $$(INCLUDE_DIR
)
140 # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
141 # or ./mmalloc (When we want the binary library built from it, we use
142 # ${MMALLOC_DIR}${subdir}.)
143 # Note that mmalloc can still be used on systems without mmap().
144 # To use your system malloc, comment out the following defines.
145 MMALLOC_DIR
= ${srcdir}/..
/mmalloc
146 MMALLOC_DEP
= $$(MMALLOC_DIR
)
147 # To use your system malloc, uncomment MMALLOC_DISABLE.
148 #MMALLOC_DISABLE = -DNO_MMALLOC
149 # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
150 #MMALLOC_CHECK = -DNO_MMALLOC_CHECK
151 MMALLOC_CFLAGS
= ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
153 # Where is the source dir for the READLINE library? Traditionally in .. or .
154 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
155 READLINE_DIR
= ${srcdir}/..
/readline
156 READLINE_DEP
= $$(READLINE_DIR
)
158 # All the includes used for CFLAGS and for lint.
159 # -I. for config files.
160 # -I${srcdir} possibly for regex.h also.
161 # -I${srcdir}/config for more generic config files.
162 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
${srcdir}/..
-I
${srcdir}/..
/config
-I
$(INCLUDE_DIR
)
164 # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
165 # from the config/ directory.
166 GLOBAL_CFLAGS
= ${MT_CFLAGS} ${MH_CFLAGS}
167 #PROFILE_CFLAGS = -pg
169 # CFLAGS is specifically reserved for setting from the command line
170 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
172 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
173 INTERNAL_CFLAGS
= ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS} ${NWINCLUDES}
176 # Perhaps should come from parent Makefile
177 VERSION
= gdbserve-4.12
181 LINTFLAGS
= -I
${BFD_DIR}
183 # Host and target-dependent makefile fragments come in here.
185 # End of host and target-dependent makefile fragments
187 # All source files that go into linking GDB remote server.
189 DEPFILES
= $(GDBSERVE_DEPFILES
)
191 SOURCES
= $(ALLDEPFILES
)
192 TAGFILES
= $(SOURCES
) ${HFILES} ${ALLPARAM} ${POSSLIBS}
194 # Prevent Sun make from putting in the machine type. Setting
195 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
197 ${CC_FOR_TARGET} -c
${INTERNAL_CFLAGS} $<
201 # Traditionally "install" depends on "all". But it may be useful
202 # not to; for example, if the user has made some trivial change to a
203 # source file and doesn't care about rebuilding or just wants to save the
204 # time it takes for make to check that all is up to date.
205 # install-only is intended to address that need.
206 install: all install-only
208 $(INSTALL_XFORM
) gdbserver
$(bindir)/gdbserver
209 $(INSTALL_XFORM1
) $(srcdir)/gdbserver
.1 $(man1dir)/gdbserver
.1
212 rm -f
$(bindir)/gdbserver
$(man1dir)/gdbserver
.1
213 # @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
221 gdbserve.nlm
: gdbserve.O
$(srcdir)/gdbserve.def
222 ${NLMCONV_FOR_TARGET} -T
$(srcdir)/gdbserve.def
224 gdbserve.O
: prelude.o gdbserve.o
$(TDEPFILES
)
225 ${LD_FOR_TARGET} $(LDFLAGS
) -r
-o gdbserve.O prelude.o gdbserve.o
${TDEPFILES}
228 @echo
"You must configure gdbserver. Look at the README file for details."
231 # Put the proper machine-specific files first, so M-. on a machine
232 # specific routine gets the one for the correct machine.
233 # The xyzzy stuff below deals with empty DEPFILES
235 etags
`find ${srcdir}/../config -name $(TM_FILE) -print` \
236 `find ${srcdir}/../config -name ${XM_FILE} -print` \
237 `find ${srcdir}/../config -name ${NAT_FILE} -print` \
238 `for i in yzzy ${DEPFILES}; do \
239 if [ x$$i != xyzzy ]; then \
240 echo ${srcdir}/$$i | sed -e 's/\.o$$/\.c/' ; \
247 rm -f
*.o
${ADD_FILES} *~
248 rm -f init.c version.c
249 rm -f gdbserve.O gdbserve.nlm core make.log
251 distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
252 rm -f tm.h xm.h config.status
256 rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
257 rm -f tm.h xm.h config.status
260 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
262 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
263 $(SHELL
) .
/config.status
268 echo
'char *version = "$(VERSION)";' >version.c
270 # GNU Make has an annoying habit of putting *all* the Makefile variables
271 # into the environment, unless you include this target as a circumvention.
272 # Rumor is that this will be fixed (and this target can be removed)
276 # GNU Make 3.63 has a different problem: it keeps tacking command line
277 # overrides onto the definition of $(MAKE). This variable setting
281 # This is the end of "Makefile.in".