gdb/op50-rom.c

   1 /* Remote target glue for the Oki op50n based eval board.
   2
   3    Copyright 1988, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
   4
   5 This file is part of GDB.
   6
   7 This program is free software; you can redistribute it and/or modify
   8 it under the terms of the GNU General Public License as published by
   9 the Free Software Foundation; either version 2 of the License, or
  10 (at your option) any later version.
  11
  12 This program is distributed in the hope that it will be useful,
  13 but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 GNU General Public License for more details.
  16
  17 You should have received a copy of the GNU General Public License
  18 along with this program; if not, write to the Free Software
  19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
  20
  21 #include "defs.h"
  22 #include "gdbcore.h"
  23 #include "target.h"
  24 #include "monitor.h"
  25 #include "serial.h"
  26
  27 static void op50n_open PARAMS ((char *args, int from_tty));
  28
  29 /*
  30  * this array of registers need to match the indexes used by GDB. The
  31  * whole reason this exists is cause the various ROM monitors use
  32  * different strings than GDB does, and doesn't support all the
  33  * registers either. So, typing "info reg sp" becomes a "r30".
  34  */
  35
  36 static char *op50n_regnames[NUM_REGS] =
  37 {
  38   "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
  39   "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
  40   "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
  41   "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
  42   "cr11", "p", NULL, NULL, NULL, "cr15", "cr19", "cr20",
  43   "cr21", "cr22", NULL, NULL, NULL, NULL, NULL, NULL,
  44   NULL, NULL, NULL, "cr0", "cr8", "cr9", "cr10","cr12",
  45   "cr13", "cr24", "cr25", "cr26",
  46 };
  47
  48 /*
  49  * Define the monitor command strings. Since these are passed directly
  50  * through to a printf style function, we need can include formatting
  51  * strings. We also need a CR or LF on the end.
  52  */
  53
  54 static struct target_ops op50n_ops;
  55
  56 static char *op50n_loadtypes[] = {"none", "srec", "default", NULL};
  57 static char *op50n_loadprotos[] = {"none", NULL};
  58
  59 static char *op50n_inits[] = {"\003.\n", NULL};
  60
  61 static struct monitor_ops op50n_cmds =
  62 {
  63   0,                            /* flags */
  64   op50n_inits,                  /* Init strings */
  65   "g\n",                        /* continue command */
  66   "t\n",                        /* single step */
  67   NULL,                         /* Interrupt char */
  68   "b %x\n",                     /* set a breakpoint */
  69   "bx %x\n",                    /* clear a breakpoint */
  70   NULL,                         /* clear all breakpoints */
  71   NULL,                         /* memory fill cmd */
  72   {
  73     "sx %x %x;.\n",             /* setmem.cmdb (addr, value) */
  74     NULL,                       /* setmem.cmdw (addr, value) */
  75     NULL,                       /* setmem.cmdl (addr, value) */
  76     NULL,                       /* setmem.cmdll (addr, value) */
  77     NULL,                       /* setreg.resp_delim */
  78     NULL,                       /* setreg.term */
  79     NULL,                       /* setreg.term_cmd */
  80   },
  81   {
  82     "sx %x\n",                  /* getmem.cmdb (addr, value) */
  83     NULL,                       /* getmem.cmdw (addr, value) */
  84     NULL,                       /* getmem.cmdl (addr, value) */
  85     NULL,                       /* getmem.cmdll (addr, value) */
  86     ": ",                       /* getmem.resp_delim */
  87     NULL,                       /* getmem.term */
  88     NULL,                       /* getmem.term_cmd */
  89   },
  90   {
  91     "x %s %x\n",                /* setreg.cmd (name, value) */
  92     NULL,                       /* setreg.resp_delim */
  93     NULL,                       /* setreg.term */
  94     NULL,                       /* setreg.term_cmd */
  95   },
  96   {
  97     "x %s\n",                   /* getreg.cmd (name) */
  98     "=",                        /* getreg.resp_delim */
  99     NULL,                       /* getreg.term */
 100     NULL,                       /* getreg.term_cmd */
 101   },
 102   NULL,                         /* dump_registers */
 103   NULL,                         /* register_pattern */
 104   NULL,                         /* supply_register */
 105   "r 0\n",                      /* download command */
 106   NULL,                         /* load response */
 107   "#",                          /* monitor command prompt */
 108   NULL,                         /* end-of-command delimitor */
 109   NULL,                         /* optional command terminator */
 110   &op50n_ops,                   /* target operations */
 111   op50n_loadtypes,              /* loadtypes */
 112   op50n_loadprotos,             /* loadprotos */
 113   "2400,4800,9600,19200,exta,38400,extb", /* supported baud rates */
 114   SERIAL_1_STOPBITS,            /* number of stop bits */
 115   op50n_regnames,               /* register names */
 116   MONITOR_OPS_MAGIC             /* magic */
 117   };
 118
 119 static void
 120 op50n_open (args, from_tty)
 121      char *args;
 122      int from_tty;
 123 {
 124   monitor_open (args, &op50n_cmds, from_tty);
 125 }
 126
 127 void
 128 _initialize_op50n ()
 129 {
 130   init_monitor_ops (&op50n_ops);
 131
 132   op50n_ops.to_shortname = "op50n";
 133   op50n_ops.to_longname = "Oki's debug monitor for the Op50n Eval board";
 134   op50n_ops.to_doc = "Debug on a Oki OP50N eval board.\n\
 135 Specify the serial device it is connected to (e.g. /dev/ttya).";
 136   op50n_ops.to_open = op50n_open;
 137
 138   add_target (&op50n_ops);
 139 }