1 /* Target-dependent code for GDB, the GNU debugger.
2 Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
3 1998, 1999, 2000, 2001, 2002
4 Free Software Foundation, Inc.
6 This file is part of GDB.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 59 Temple Place - Suite 330,
21 Boston, MA 02111-1307, USA. */
32 #include "arch-utils.h"
36 #include "parser-defs.h"
38 #include "libbfd.h" /* for bfd_default_set_arch_mach */
39 #include "coff/internal.h" /* for libcoff.h */
40 #include "libcoff.h" /* for xcoff_data */
41 #include "coff/xcoff.h"
46 #include "solib-svr4.h"
49 /* If the kernel has to deliver a signal, it pushes a sigcontext
50 structure on the stack and then calls the signal handler, passing
51 the address of the sigcontext in an argument register. Usually
52 the signal handler doesn't save this register, so we have to
53 access the sigcontext structure via an offset from the signal handler
55 The following constants were determined by experimentation on AIX 3.2. */
56 #define SIG_FRAME_PC_OFFSET 96
57 #define SIG_FRAME_LR_OFFSET 108
58 #define SIG_FRAME_FP_OFFSET 284
60 /* To be used by skip_prologue. */
62 struct rs6000_framedata
64 int offset
; /* total size of frame --- the distance
65 by which we decrement sp to allocate
67 int saved_gpr
; /* smallest # of saved gpr */
68 int saved_fpr
; /* smallest # of saved fpr */
69 int saved_vr
; /* smallest # of saved vr */
70 int alloca_reg
; /* alloca register number (frame ptr) */
71 char frameless
; /* true if frameless functions. */
72 char nosavedpc
; /* true if pc not saved. */
73 int gpr_offset
; /* offset of saved gprs from prev sp */
74 int fpr_offset
; /* offset of saved fprs from prev sp */
75 int vr_offset
; /* offset of saved vrs from prev sp */
76 int lr_offset
; /* offset of saved lr */
77 int cr_offset
; /* offset of saved cr */
78 int vrsave_offset
; /* offset of saved vrsave register */
81 /* Description of a single register. */
85 char *name
; /* name of register */
86 unsigned char sz32
; /* size on 32-bit arch, 0 if nonextant */
87 unsigned char sz64
; /* size on 64-bit arch, 0 if nonextant */
88 unsigned char fpr
; /* whether register is floating-point */
89 unsigned char pseudo
; /* whether register is pseudo */
92 /* Breakpoint shadows for the single step instructions will be kept here. */
94 static struct sstep_breaks
96 /* Address, or 0 if this is not in use. */
98 /* Shadow contents. */
103 /* Hook for determining the TOC address when calling functions in the
104 inferior under AIX. The initialization code in rs6000-nat.c sets
105 this hook to point to find_toc_address. */
107 CORE_ADDR (*rs6000_find_toc_address_hook
) (CORE_ADDR
) = NULL
;
109 /* Hook to set the current architecture when starting a child process.
110 rs6000-nat.c sets this. */
112 void (*rs6000_set_host_arch_hook
) (int) = NULL
;
114 /* Static function prototypes */
116 static CORE_ADDR
branch_dest (int opcode
, int instr
, CORE_ADDR pc
,
118 static CORE_ADDR
skip_prologue (CORE_ADDR
, CORE_ADDR
,
119 struct rs6000_framedata
*);
120 static void frame_get_saved_regs (struct frame_info
* fi
,
121 struct rs6000_framedata
* fdatap
);
122 static CORE_ADDR
frame_initial_stack_address (struct frame_info
*);
124 /* Read a LEN-byte address from debugged memory address MEMADDR. */
127 read_memory_addr (CORE_ADDR memaddr
, int len
)
129 return read_memory_unsigned_integer (memaddr
, len
);
133 rs6000_skip_prologue (CORE_ADDR pc
)
135 struct rs6000_framedata frame
;
136 pc
= skip_prologue (pc
, 0, &frame
);
141 /* Fill in fi->saved_regs */
143 struct frame_extra_info
145 /* Functions calling alloca() change the value of the stack
146 pointer. We need to use initial stack pointer (which is saved in
147 r31 by gcc) in such cases. If a compiler emits traceback table,
148 then we should use the alloca register specified in traceback
150 CORE_ADDR initial_sp
; /* initial stack pointer. */
154 rs6000_init_extra_frame_info (int fromleaf
, struct frame_info
*fi
)
156 fi
->extra_info
= (struct frame_extra_info
*)
157 frame_obstack_alloc (sizeof (struct frame_extra_info
));
158 fi
->extra_info
->initial_sp
= 0;
159 if (fi
->next
!= (CORE_ADDR
) 0
160 && fi
->pc
< TEXT_SEGMENT_BASE
)
161 /* We're in get_prev_frame */
162 /* and this is a special signal frame. */
163 /* (fi->pc will be some low address in the kernel, */
164 /* to which the signal handler returns). */
165 fi
->signal_handler_caller
= 1;
168 /* Put here the code to store, into a struct frame_saved_regs,
169 the addresses of the saved registers of frame described by FRAME_INFO.
170 This includes special registers such as pc and fp saved in special
171 ways in the stack frame. sp is even more special:
172 the address we return for it IS the sp for the next frame. */
174 /* In this implementation for RS/6000, we do *not* save sp. I am
175 not sure if it will be needed. The following function takes care of gpr's
179 rs6000_frame_init_saved_regs (struct frame_info
*fi
)
181 frame_get_saved_regs (fi
, NULL
);
185 rs6000_frame_args_address (struct frame_info
*fi
)
187 if (fi
->extra_info
->initial_sp
!= 0)
188 return fi
->extra_info
->initial_sp
;
190 return frame_initial_stack_address (fi
);
193 /* Immediately after a function call, return the saved pc.
194 Can't go through the frames for this because on some machines
195 the new frame is not set up until the new function executes
196 some instructions. */
199 rs6000_saved_pc_after_call (struct frame_info
*fi
)
201 return read_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
);
204 /* Calculate the destination of a branch/jump. Return -1 if not a branch. */
207 branch_dest (int opcode
, int instr
, CORE_ADDR pc
, CORE_ADDR safety
)
214 absolute
= (int) ((instr
>> 1) & 1);
219 immediate
= ((instr
& ~3) << 6) >> 6; /* br unconditional */
223 dest
= pc
+ immediate
;
227 immediate
= ((instr
& ~3) << 16) >> 16; /* br conditional */
231 dest
= pc
+ immediate
;
235 ext_op
= (instr
>> 1) & 0x3ff;
237 if (ext_op
== 16) /* br conditional register */
239 dest
= read_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
) & ~3;
241 /* If we are about to return from a signal handler, dest is
242 something like 0x3c90. The current frame is a signal handler
243 caller frame, upon completion of the sigreturn system call
244 execution will return to the saved PC in the frame. */
245 if (dest
< TEXT_SEGMENT_BASE
)
247 struct frame_info
*fi
;
249 fi
= get_current_frame ();
251 dest
= read_memory_addr (fi
->frame
+ SIG_FRAME_PC_OFFSET
,
252 gdbarch_tdep (current_gdbarch
)->wordsize
);
256 else if (ext_op
== 528) /* br cond to count reg */
258 dest
= read_register (gdbarch_tdep (current_gdbarch
)->ppc_ctr_regnum
) & ~3;
260 /* If we are about to execute a system call, dest is something
261 like 0x22fc or 0x3b00. Upon completion the system call
262 will return to the address in the link register. */
263 if (dest
< TEXT_SEGMENT_BASE
)
264 dest
= read_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
) & ~3;
273 return (dest
< TEXT_SEGMENT_BASE
) ? safety
: dest
;
277 /* Sequence of bytes for breakpoint instruction. */
279 #define BIG_BREAKPOINT { 0x7d, 0x82, 0x10, 0x08 }
280 #define LITTLE_BREAKPOINT { 0x08, 0x10, 0x82, 0x7d }
282 const static unsigned char *
283 rs6000_breakpoint_from_pc (CORE_ADDR
*bp_addr
, int *bp_size
)
285 static unsigned char big_breakpoint
[] = BIG_BREAKPOINT
;
286 static unsigned char little_breakpoint
[] = LITTLE_BREAKPOINT
;
288 if (TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
)
289 return big_breakpoint
;
291 return little_breakpoint
;
295 /* AIX does not support PT_STEP. Simulate it. */
298 rs6000_software_single_step (enum target_signal signal
,
299 int insert_breakpoints_p
)
303 const char *breakp
= rs6000_breakpoint_from_pc (&dummy
, &breakp_sz
);
309 if (insert_breakpoints_p
)
314 insn
= read_memory_integer (loc
, 4);
316 breaks
[0] = loc
+ breakp_sz
;
318 breaks
[1] = branch_dest (opcode
, insn
, loc
, breaks
[0]);
320 /* Don't put two breakpoints on the same address. */
321 if (breaks
[1] == breaks
[0])
324 stepBreaks
[1].address
= 0;
326 for (ii
= 0; ii
< 2; ++ii
)
329 /* ignore invalid breakpoint. */
330 if (breaks
[ii
] == -1)
332 target_insert_breakpoint (breaks
[ii
], stepBreaks
[ii
].data
);
333 stepBreaks
[ii
].address
= breaks
[ii
];
340 /* remove step breakpoints. */
341 for (ii
= 0; ii
< 2; ++ii
)
342 if (stepBreaks
[ii
].address
!= 0)
343 target_remove_breakpoint (stepBreaks
[ii
].address
,
344 stepBreaks
[ii
].data
);
346 errno
= 0; /* FIXME, don't ignore errors! */
347 /* What errors? {read,write}_memory call error(). */
351 /* return pc value after skipping a function prologue and also return
352 information about a function frame.
354 in struct rs6000_framedata fdata:
355 - frameless is TRUE, if function does not have a frame.
356 - nosavedpc is TRUE, if function does not save %pc value in its frame.
357 - offset is the initial size of this stack frame --- the amount by
358 which we decrement the sp to allocate the frame.
359 - saved_gpr is the number of the first saved gpr.
360 - saved_fpr is the number of the first saved fpr.
361 - saved_vr is the number of the first saved vr.
362 - alloca_reg is the number of the register used for alloca() handling.
364 - gpr_offset is the offset of the first saved gpr from the previous frame.
365 - fpr_offset is the offset of the first saved fpr from the previous frame.
366 - vr_offset is the offset of the first saved vr from the previous frame.
367 - lr_offset is the offset of the saved lr
368 - cr_offset is the offset of the saved cr
369 - vrsave_offset is the offset of the saved vrsave register
372 #define SIGNED_SHORT(x) \
373 ((sizeof (short) == 2) \
374 ? ((int)(short)(x)) \
375 : ((int)((((x) & 0xffff) ^ 0x8000) - 0x8000)))
377 #define GET_SRC_REG(x) (((x) >> 21) & 0x1f)
379 /* Limit the number of skipped non-prologue instructions, as the examining
380 of the prologue is expensive. */
381 static int max_skip_non_prologue_insns
= 10;
383 /* Given PC representing the starting address of a function, and
384 LIM_PC which is the (sloppy) limit to which to scan when looking
385 for a prologue, attempt to further refine this limit by using
386 the line data in the symbol table. If successful, a better guess
387 on where the prologue ends is returned, otherwise the previous
388 value of lim_pc is returned. */
390 refine_prologue_limit (CORE_ADDR pc
, CORE_ADDR lim_pc
)
392 struct symtab_and_line prologue_sal
;
394 prologue_sal
= find_pc_line (pc
, 0);
395 if (prologue_sal
.line
!= 0)
398 CORE_ADDR addr
= prologue_sal
.end
;
400 /* Handle the case in which compiler's optimizer/scheduler
401 has moved instructions into the prologue. We scan ahead
402 in the function looking for address ranges whose corresponding
403 line number is less than or equal to the first one that we
404 found for the function. (It can be less than when the
405 scheduler puts a body instruction before the first prologue
407 for (i
= 2 * max_skip_non_prologue_insns
;
408 i
> 0 && (lim_pc
== 0 || addr
< lim_pc
);
411 struct symtab_and_line sal
;
413 sal
= find_pc_line (addr
, 0);
416 if (sal
.line
<= prologue_sal
.line
417 && sal
.symtab
== prologue_sal
.symtab
)
424 if (lim_pc
== 0 || prologue_sal
.end
< lim_pc
)
425 lim_pc
= prologue_sal
.end
;
432 skip_prologue (CORE_ADDR pc
, CORE_ADDR lim_pc
, struct rs6000_framedata
*fdata
)
434 CORE_ADDR orig_pc
= pc
;
435 CORE_ADDR last_prologue_pc
= pc
;
436 CORE_ADDR li_found_pc
= 0;
440 long vr_saved_offset
= 0;
447 int minimal_toc_loaded
= 0;
448 int prev_insn_was_prologue_insn
= 1;
449 int num_skip_non_prologue_insns
= 0;
451 /* Attempt to find the end of the prologue when no limit is specified.
452 Note that refine_prologue_limit() has been written so that it may
453 be used to "refine" the limits of non-zero PC values too, but this
454 is only safe if we 1) trust the line information provided by the
455 compiler and 2) iterate enough to actually find the end of the
458 It may become a good idea at some point (for both performance and
459 accuracy) to unconditionally call refine_prologue_limit(). But,
460 until we can make a clear determination that this is beneficial,
461 we'll play it safe and only use it to obtain a limit when none
462 has been specified. */
464 lim_pc
= refine_prologue_limit (pc
, lim_pc
);
466 memset (fdata
, 0, sizeof (struct rs6000_framedata
));
467 fdata
->saved_gpr
= -1;
468 fdata
->saved_fpr
= -1;
469 fdata
->saved_vr
= -1;
470 fdata
->alloca_reg
= -1;
471 fdata
->frameless
= 1;
472 fdata
->nosavedpc
= 1;
476 /* Sometimes it isn't clear if an instruction is a prologue
477 instruction or not. When we encounter one of these ambiguous
478 cases, we'll set prev_insn_was_prologue_insn to 0 (false).
479 Otherwise, we'll assume that it really is a prologue instruction. */
480 if (prev_insn_was_prologue_insn
)
481 last_prologue_pc
= pc
;
483 /* Stop scanning if we've hit the limit. */
484 if (lim_pc
!= 0 && pc
>= lim_pc
)
487 prev_insn_was_prologue_insn
= 1;
489 /* Fetch the instruction and convert it to an integer. */
490 if (target_read_memory (pc
, buf
, 4))
492 op
= extract_signed_integer (buf
, 4);
494 if ((op
& 0xfc1fffff) == 0x7c0802a6)
496 lr_reg
= (op
& 0x03e00000) | 0x90010000;
500 else if ((op
& 0xfc1fffff) == 0x7c000026)
502 cr_reg
= (op
& 0x03e00000) | 0x90010000;
506 else if ((op
& 0xfc1f0000) == 0xd8010000)
507 { /* stfd Rx,NUM(r1) */
508 reg
= GET_SRC_REG (op
);
509 if (fdata
->saved_fpr
== -1 || fdata
->saved_fpr
> reg
)
511 fdata
->saved_fpr
= reg
;
512 fdata
->fpr_offset
= SIGNED_SHORT (op
) + offset
;
517 else if (((op
& 0xfc1f0000) == 0xbc010000) || /* stm Rx, NUM(r1) */
518 (((op
& 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */
519 (op
& 0xfc1f0003) == 0xf8010000) && /* std rx,NUM(r1) */
520 (op
& 0x03e00000) >= 0x01a00000)) /* rx >= r13 */
523 reg
= GET_SRC_REG (op
);
524 if (fdata
->saved_gpr
== -1 || fdata
->saved_gpr
> reg
)
526 fdata
->saved_gpr
= reg
;
527 if ((op
& 0xfc1f0003) == 0xf8010000)
529 fdata
->gpr_offset
= SIGNED_SHORT (op
) + offset
;
534 else if ((op
& 0xffff0000) == 0x60000000)
537 /* Allow nops in the prologue, but do not consider them to
538 be part of the prologue unless followed by other prologue
540 prev_insn_was_prologue_insn
= 0;
544 else if ((op
& 0xffff0000) == 0x3c000000)
545 { /* addis 0,0,NUM, used
547 fdata
->offset
= (op
& 0x0000ffff) << 16;
548 fdata
->frameless
= 0;
552 else if ((op
& 0xffff0000) == 0x60000000)
553 { /* ori 0,0,NUM, 2nd ha
554 lf of >= 32k frames */
555 fdata
->offset
|= (op
& 0x0000ffff);
556 fdata
->frameless
= 0;
560 else if (lr_reg
!= -1 && (op
& 0xffff0000) == lr_reg
)
563 fdata
->lr_offset
= SIGNED_SHORT (op
) + offset
;
564 fdata
->nosavedpc
= 0;
569 else if (cr_reg
!= -1 && (op
& 0xffff0000) == cr_reg
)
572 fdata
->cr_offset
= SIGNED_SHORT (op
) + offset
;
577 else if (op
== 0x48000005)
583 else if (op
== 0x48000004)
588 else if ((op
& 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used
589 in V.4 -mminimal-toc */
590 (op
& 0xffff0000) == 0x3bde0000)
591 { /* addi 30,30,foo@l */
595 else if ((op
& 0xfc000001) == 0x48000001)
599 fdata
->frameless
= 0;
600 /* Don't skip over the subroutine call if it is not within
601 the first three instructions of the prologue. */
602 if ((pc
- orig_pc
) > 8)
605 op
= read_memory_integer (pc
+ 4, 4);
607 /* At this point, make sure this is not a trampoline
608 function (a function that simply calls another functions,
609 and nothing else). If the next is not a nop, this branch
610 was part of the function prologue. */
612 if (op
== 0x4def7b82 || op
== 0) /* crorc 15, 15, 15 */
613 break; /* don't skip over
617 /* update stack pointer */
619 else if ((op
& 0xffff0000) == 0x94210000 || /* stu r1,NUM(r1) */
620 (op
& 0xffff0003) == 0xf8210001) /* stdu r1,NUM(r1) */
622 fdata
->frameless
= 0;
623 if ((op
& 0xffff0003) == 0xf8210001)
625 fdata
->offset
= SIGNED_SHORT (op
);
626 offset
= fdata
->offset
;
630 else if (op
== 0x7c21016e)
632 fdata
->frameless
= 0;
633 offset
= fdata
->offset
;
636 /* Load up minimal toc pointer */
638 else if ((op
>> 22) == 0x20f
639 && !minimal_toc_loaded
)
640 { /* l r31,... or l r30,... */
641 minimal_toc_loaded
= 1;
644 /* move parameters from argument registers to local variable
647 else if ((op
& 0xfc0007fe) == 0x7c000378 && /* mr(.) Rx,Ry */
648 (((op
>> 21) & 31) >= 3) && /* R3 >= Ry >= R10 */
649 (((op
>> 21) & 31) <= 10) &&
650 (((op
>> 16) & 31) >= fdata
->saved_gpr
)) /* Rx: local var reg */
654 /* store parameters in stack */
656 else if ((op
& 0xfc1f0003) == 0xf8010000 || /* std rx,NUM(r1) */
657 (op
& 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
658 (op
& 0xfc1f0000) == 0xfc010000) /* frsp, fp?,NUM(r1) */
662 /* store parameters in stack via frame pointer */
665 ((op
& 0xfc1f0000) == 0x901f0000 || /* st rx,NUM(r1) */
666 (op
& 0xfc1f0000) == 0xd81f0000 || /* stfd Rx,NUM(r1) */
667 (op
& 0xfc1f0000) == 0xfc1f0000))
668 { /* frsp, fp?,NUM(r1) */
671 /* Set up frame pointer */
673 else if (op
== 0x603f0000 /* oril r31, r1, 0x0 */
676 fdata
->frameless
= 0;
678 fdata
->alloca_reg
= 31;
681 /* Another way to set up the frame pointer. */
683 else if ((op
& 0xfc1fffff) == 0x38010000)
684 { /* addi rX, r1, 0x0 */
685 fdata
->frameless
= 0;
687 fdata
->alloca_reg
= (op
& ~0x38010000) >> 21;
690 /* AltiVec related instructions. */
691 /* Store the vrsave register (spr 256) in another register for
692 later manipulation, or load a register into the vrsave
693 register. 2 instructions are used: mfvrsave and
694 mtvrsave. They are shorthand notation for mfspr Rn, SPR256
695 and mtspr SPR256, Rn. */
696 /* mfspr Rn SPR256 == 011111 nnnnn 0000001000 01010100110
697 mtspr SPR256 Rn == 011111 nnnnn 0000001000 01110100110 */
698 else if ((op
& 0xfc1fffff) == 0x7c0042a6) /* mfvrsave Rn */
700 vrsave_reg
= GET_SRC_REG (op
);
703 else if ((op
& 0xfc1fffff) == 0x7c0043a6) /* mtvrsave Rn */
707 /* Store the register where vrsave was saved to onto the stack:
708 rS is the register where vrsave was stored in a previous
710 /* 100100 sssss 00001 dddddddd dddddddd */
711 else if ((op
& 0xfc1f0000) == 0x90010000) /* stw rS, d(r1) */
713 if (vrsave_reg
== GET_SRC_REG (op
))
715 fdata
->vrsave_offset
= SIGNED_SHORT (op
) + offset
;
720 /* Compute the new value of vrsave, by modifying the register
721 where vrsave was saved to. */
722 else if (((op
& 0xfc000000) == 0x64000000) /* oris Ra, Rs, UIMM */
723 || ((op
& 0xfc000000) == 0x60000000))/* ori Ra, Rs, UIMM */
727 /* li r0, SIMM (short for addi r0, 0, SIMM). This is the first
728 in a pair of insns to save the vector registers on the
730 /* 001110 00000 00000 iiii iiii iiii iiii */
731 else if ((op
& 0xffff0000) == 0x38000000) /* li r0, SIMM */
734 vr_saved_offset
= SIGNED_SHORT (op
);
736 /* Store vector register S at (r31+r0) aligned to 16 bytes. */
737 /* 011111 sssss 11111 00000 00111001110 */
738 else if ((op
& 0xfc1fffff) == 0x7c1f01ce) /* stvx Vs, R31, R0 */
740 if (pc
== (li_found_pc
+ 4))
742 vr_reg
= GET_SRC_REG (op
);
743 /* If this is the first vector reg to be saved, or if
744 it has a lower number than others previously seen,
745 reupdate the frame info. */
746 if (fdata
->saved_vr
== -1 || fdata
->saved_vr
> vr_reg
)
748 fdata
->saved_vr
= vr_reg
;
749 fdata
->vr_offset
= vr_saved_offset
+ offset
;
751 vr_saved_offset
= -1;
756 /* End AltiVec related instructions. */
759 /* Not a recognized prologue instruction.
760 Handle optimizer code motions into the prologue by continuing
761 the search if we have no valid frame yet or if the return
762 address is not yet saved in the frame. */
763 if (fdata
->frameless
== 0
764 && (lr_reg
== -1 || fdata
->nosavedpc
== 0))
767 if (op
== 0x4e800020 /* blr */
768 || op
== 0x4e800420) /* bctr */
769 /* Do not scan past epilogue in frameless functions or
772 if ((op
& 0xf4000000) == 0x40000000) /* bxx */
773 /* Never skip branches. */
776 if (num_skip_non_prologue_insns
++ > max_skip_non_prologue_insns
)
777 /* Do not scan too many insns, scanning insns is expensive with
781 /* Continue scanning. */
782 prev_insn_was_prologue_insn
= 0;
788 /* I have problems with skipping over __main() that I need to address
789 * sometime. Previously, I used to use misc_function_vector which
790 * didn't work as well as I wanted to be. -MGO */
792 /* If the first thing after skipping a prolog is a branch to a function,
793 this might be a call to an initializer in main(), introduced by gcc2.
794 We'd like to skip over it as well. Fortunately, xlc does some extra
795 work before calling a function right after a prologue, thus we can
796 single out such gcc2 behaviour. */
799 if ((op
& 0xfc000001) == 0x48000001)
800 { /* bl foo, an initializer function? */
801 op
= read_memory_integer (pc
+ 4, 4);
803 if (op
== 0x4def7b82)
804 { /* cror 0xf, 0xf, 0xf (nop) */
806 /* check and see if we are in main. If so, skip over this initializer
809 tmp
= find_pc_misc_function (pc
);
810 if (tmp
>= 0 && STREQ (misc_function_vector
[tmp
].name
, main_name ()))
816 fdata
->offset
= -fdata
->offset
;
817 return last_prologue_pc
;
821 /*************************************************************************
822 Support for creating pushing a dummy frame into the stack, and popping
824 *************************************************************************/
827 /* Pop the innermost frame, go back to the caller. */
830 rs6000_pop_frame (void)
832 CORE_ADDR pc
, lr
, sp
, prev_sp
, addr
; /* %pc, %lr, %sp */
833 struct rs6000_framedata fdata
;
834 struct frame_info
*frame
= get_current_frame ();
838 sp
= FRAME_FP (frame
);
840 if (PC_IN_CALL_DUMMY (frame
->pc
, frame
->frame
, frame
->frame
))
842 generic_pop_dummy_frame ();
843 flush_cached_frames ();
847 /* Make sure that all registers are valid. */
848 read_register_bytes (0, NULL
, REGISTER_BYTES
);
850 /* figure out previous %pc value. If the function is frameless, it is
851 still in the link register, otherwise walk the frames and retrieve the
852 saved %pc value in the previous frame. */
854 addr
= get_pc_function_start (frame
->pc
);
855 (void) skip_prologue (addr
, frame
->pc
, &fdata
);
857 wordsize
= gdbarch_tdep (current_gdbarch
)->wordsize
;
861 prev_sp
= read_memory_addr (sp
, wordsize
);
862 if (fdata
.lr_offset
== 0)
863 lr
= read_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
);
865 lr
= read_memory_addr (prev_sp
+ fdata
.lr_offset
, wordsize
);
867 /* reset %pc value. */
868 write_register (PC_REGNUM
, lr
);
870 /* reset register values if any was saved earlier. */
872 if (fdata
.saved_gpr
!= -1)
874 addr
= prev_sp
+ fdata
.gpr_offset
;
875 for (ii
= fdata
.saved_gpr
; ii
<= 31; ++ii
)
877 read_memory (addr
, ®isters
[REGISTER_BYTE (ii
)], wordsize
);
882 if (fdata
.saved_fpr
!= -1)
884 addr
= prev_sp
+ fdata
.fpr_offset
;
885 for (ii
= fdata
.saved_fpr
; ii
<= 31; ++ii
)
887 read_memory (addr
, ®isters
[REGISTER_BYTE (ii
+ FP0_REGNUM
)], 8);
892 write_register (SP_REGNUM
, prev_sp
);
893 target_store_registers (-1);
894 flush_cached_frames ();
897 /* Fixup the call sequence of a dummy function, with the real function
898 address. Its arguments will be passed by gdb. */
901 rs6000_fix_call_dummy (char *dummyname
, CORE_ADDR pc
, CORE_ADDR fun
,
902 int nargs
, struct value
**args
, struct type
*type
,
906 CORE_ADDR target_addr
;
908 if (rs6000_find_toc_address_hook
!= NULL
)
910 CORE_ADDR tocvalue
= (*rs6000_find_toc_address_hook
) (fun
);
911 write_register (gdbarch_tdep (current_gdbarch
)->ppc_toc_regnum
,
916 /* Pass the arguments in either registers, or in the stack. In RS/6000,
917 the first eight words of the argument list (that might be less than
918 eight parameters if some parameters occupy more than one word) are
919 passed in r3..r10 registers. float and double parameters are
920 passed in fpr's, in addition to that. Rest of the parameters if any
921 are passed in user stack. There might be cases in which half of the
922 parameter is copied into registers, the other half is pushed into
925 Stack must be aligned on 64-bit boundaries when synthesizing
928 If the function is returning a structure, then the return address is passed
929 in r3, then the first 7 words of the parameters can be passed in registers,
933 rs6000_push_arguments (int nargs
, struct value
**args
, CORE_ADDR sp
,
934 int struct_return
, CORE_ADDR struct_addr
)
938 int argno
; /* current argument number */
939 int argbytes
; /* current argument byte */
941 int f_argno
= 0; /* current floating point argno */
942 int wordsize
= gdbarch_tdep (current_gdbarch
)->wordsize
;
944 struct value
*arg
= 0;
949 /* The first eight words of ther arguments are passed in registers. Copy
952 If the function is returning a `struct', then the first word (which
953 will be passed in r3) is used for struct return address. In that
954 case we should advance one word and start from r4 register to copy
957 ii
= struct_return
? 1 : 0;
960 effectively indirect call... gcc does...
962 return_val example( float, int);
965 float in fp0, int in r3
966 offset of stack on overflow 8/16
967 for varargs, must go by type.
969 float in r3&r4, int in r5
970 offset of stack on overflow different
972 return in r3 or f0. If no float, must study how gcc emulates floats;
973 pay attention to arg promotion.
974 User may have to cast\args to handle promotion correctly
975 since gdb won't know if prototype supplied or not.
978 for (argno
= 0, argbytes
= 0; argno
< nargs
&& ii
< 8; ++ii
)
980 int reg_size
= REGISTER_RAW_SIZE (ii
+ 3);
983 type
= check_typedef (VALUE_TYPE (arg
));
984 len
= TYPE_LENGTH (type
);
986 if (TYPE_CODE (type
) == TYPE_CODE_FLT
)
989 /* floating point arguments are passed in fpr's, as well as gpr's.
990 There are 13 fpr's reserved for passing parameters. At this point
991 there is no way we would run out of them. */
995 "Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno
);
997 memcpy (®isters
[REGISTER_BYTE (FP0_REGNUM
+ 1 + f_argno
)],
998 VALUE_CONTENTS (arg
),
1006 /* Argument takes more than one register. */
1007 while (argbytes
< len
)
1009 memset (®isters
[REGISTER_BYTE (ii
+ 3)], 0, reg_size
);
1010 memcpy (®isters
[REGISTER_BYTE (ii
+ 3)],
1011 ((char *) VALUE_CONTENTS (arg
)) + argbytes
,
1012 (len
- argbytes
) > reg_size
1013 ? reg_size
: len
- argbytes
);
1014 ++ii
, argbytes
+= reg_size
;
1017 goto ran_out_of_registers_for_arguments
;
1023 { /* Argument can fit in one register. No problem. */
1024 int adj
= TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
? reg_size
- len
: 0;
1025 memset (®isters
[REGISTER_BYTE (ii
+ 3)], 0, reg_size
);
1026 memcpy ((char *)®isters
[REGISTER_BYTE (ii
+ 3)] + adj
,
1027 VALUE_CONTENTS (arg
), len
);
1032 ran_out_of_registers_for_arguments
:
1034 saved_sp
= read_sp ();
1036 /* location for 8 parameters are always reserved. */
1039 /* another six words for back chain, TOC register, link register, etc. */
1042 /* stack pointer must be quadword aligned */
1045 /* if there are more arguments, allocate space for them in
1046 the stack, then push them starting from the ninth one. */
1048 if ((argno
< nargs
) || argbytes
)
1054 space
+= ((len
- argbytes
+ 3) & -4);
1060 for (; jj
< nargs
; ++jj
)
1062 struct value
*val
= args
[jj
];
1063 space
+= ((TYPE_LENGTH (VALUE_TYPE (val
))) + 3) & -4;
1066 /* add location required for the rest of the parameters */
1067 space
= (space
+ 15) & -16;
1070 /* This is another instance we need to be concerned about securing our
1071 stack space. If we write anything underneath %sp (r1), we might conflict
1072 with the kernel who thinks he is free to use this area. So, update %sp
1073 first before doing anything else. */
1075 write_register (SP_REGNUM
, sp
);
1077 /* if the last argument copied into the registers didn't fit there
1078 completely, push the rest of it into stack. */
1082 write_memory (sp
+ 24 + (ii
* 4),
1083 ((char *) VALUE_CONTENTS (arg
)) + argbytes
,
1086 ii
+= ((len
- argbytes
+ 3) & -4) / 4;
1089 /* push the rest of the arguments into stack. */
1090 for (; argno
< nargs
; ++argno
)
1094 type
= check_typedef (VALUE_TYPE (arg
));
1095 len
= TYPE_LENGTH (type
);
1098 /* float types should be passed in fpr's, as well as in the stack. */
1099 if (TYPE_CODE (type
) == TYPE_CODE_FLT
&& f_argno
< 13)
1104 "Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno
);
1106 memcpy (®isters
[REGISTER_BYTE (FP0_REGNUM
+ 1 + f_argno
)],
1107 VALUE_CONTENTS (arg
),
1112 write_memory (sp
+ 24 + (ii
* 4), (char *) VALUE_CONTENTS (arg
), len
);
1113 ii
+= ((len
+ 3) & -4) / 4;
1117 /* Secure stack areas first, before doing anything else. */
1118 write_register (SP_REGNUM
, sp
);
1120 /* set back chain properly */
1121 store_address (tmp_buffer
, 4, saved_sp
);
1122 write_memory (sp
, tmp_buffer
, 4);
1124 target_store_registers (-1);
1128 /* Function: ppc_push_return_address (pc, sp)
1129 Set up the return address for the inferior function call. */
1132 ppc_push_return_address (CORE_ADDR pc
, CORE_ADDR sp
)
1134 write_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
,
1135 CALL_DUMMY_ADDRESS ());
1139 /* Extract a function return value of type TYPE from raw register array
1140 REGBUF, and copy that return value into VALBUF in virtual format. */
1143 rs6000_extract_return_value (struct type
*valtype
, char *regbuf
, char *valbuf
)
1146 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1148 if (TYPE_CODE (valtype
) == TYPE_CODE_FLT
)
1153 /* floats and doubles are returned in fpr1. fpr's have a size of 8 bytes.
1154 We need to truncate the return value into float size (4 byte) if
1157 if (TYPE_LENGTH (valtype
) > 4) /* this is a double */
1159 ®buf
[REGISTER_BYTE (FP0_REGNUM
+ 1)],
1160 TYPE_LENGTH (valtype
));
1163 memcpy (&dd
, ®buf
[REGISTER_BYTE (FP0_REGNUM
+ 1)], 8);
1165 memcpy (valbuf
, &ff
, sizeof (float));
1168 else if (TYPE_CODE (valtype
) == TYPE_CODE_ARRAY
1169 && TYPE_LENGTH (valtype
) == 16
1170 && TYPE_VECTOR (valtype
))
1172 memcpy (valbuf
, regbuf
+ REGISTER_BYTE (tdep
->ppc_vr0_regnum
+ 2),
1173 TYPE_LENGTH (valtype
));
1177 /* return value is copied starting from r3. */
1178 if (TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
1179 && TYPE_LENGTH (valtype
) < REGISTER_RAW_SIZE (3))
1180 offset
= REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype
);
1183 regbuf
+ REGISTER_BYTE (3) + offset
,
1184 TYPE_LENGTH (valtype
));
1188 /* Keep structure return address in this variable.
1189 FIXME: This is a horrid kludge which should not be allowed to continue
1190 living. This only allows a single nested call to a structure-returning
1191 function. Come on, guys! -- gnu@cygnus.com, Aug 92 */
1193 static CORE_ADDR rs6000_struct_return_address
;
1195 /* Return whether handle_inferior_event() should proceed through code
1196 starting at PC in function NAME when stepping.
1198 The AIX -bbigtoc linker option generates functions @FIX0, @FIX1, etc. to
1199 handle memory references that are too distant to fit in instructions
1200 generated by the compiler. For example, if 'foo' in the following
1205 is greater than 32767, the linker might replace the lwz with a branch to
1206 somewhere in @FIX1 that does the load in 2 instructions and then branches
1207 back to where execution should continue.
1209 GDB should silently step over @FIX code, just like AIX dbx does.
1210 Unfortunately, the linker uses the "b" instruction for the branches,
1211 meaning that the link register doesn't get set. Therefore, GDB's usual
1212 step_over_function() mechanism won't work.
1214 Instead, use the IN_SOLIB_RETURN_TRAMPOLINE and SKIP_TRAMPOLINE_CODE hooks
1215 in handle_inferior_event() to skip past @FIX code. */
1218 rs6000_in_solib_return_trampoline (CORE_ADDR pc
, char *name
)
1220 return name
&& !strncmp (name
, "@FIX", 4);
1223 /* Skip code that the user doesn't want to see when stepping:
1225 1. Indirect function calls use a piece of trampoline code to do context
1226 switching, i.e. to set the new TOC table. Skip such code if we are on
1227 its first instruction (as when we have single-stepped to here).
1229 2. Skip shared library trampoline code (which is different from
1230 indirect function call trampolines).
1232 3. Skip bigtoc fixup code.
1234 Result is desired PC to step until, or NULL if we are not in
1235 code that should be skipped. */
1238 rs6000_skip_trampoline_code (CORE_ADDR pc
)
1240 register unsigned int ii
, op
;
1242 CORE_ADDR solib_target_pc
;
1243 struct minimal_symbol
*msymbol
;
1245 static unsigned trampoline_code
[] =
1247 0x800b0000, /* l r0,0x0(r11) */
1248 0x90410014, /* st r2,0x14(r1) */
1249 0x7c0903a6, /* mtctr r0 */
1250 0x804b0004, /* l r2,0x4(r11) */
1251 0x816b0008, /* l r11,0x8(r11) */
1252 0x4e800420, /* bctr */
1253 0x4e800020, /* br */
1257 /* Check for bigtoc fixup code. */
1258 msymbol
= lookup_minimal_symbol_by_pc (pc
);
1259 if (msymbol
&& rs6000_in_solib_return_trampoline (pc
, SYMBOL_NAME (msymbol
)))
1261 /* Double-check that the third instruction from PC is relative "b". */
1262 op
= read_memory_integer (pc
+ 8, 4);
1263 if ((op
& 0xfc000003) == 0x48000000)
1265 /* Extract bits 6-29 as a signed 24-bit relative word address and
1266 add it to the containing PC. */
1267 rel
= ((int)(op
<< 6) >> 6);
1268 return pc
+ 8 + rel
;
1272 /* If pc is in a shared library trampoline, return its target. */
1273 solib_target_pc
= find_solib_trampoline_target (pc
);
1274 if (solib_target_pc
)
1275 return solib_target_pc
;
1277 for (ii
= 0; trampoline_code
[ii
]; ++ii
)
1279 op
= read_memory_integer (pc
+ (ii
* 4), 4);
1280 if (op
!= trampoline_code
[ii
])
1283 ii
= read_register (11); /* r11 holds destination addr */
1284 pc
= read_memory_addr (ii
, gdbarch_tdep (current_gdbarch
)->wordsize
); /* (r11) value */
1288 /* Determines whether the function FI has a frame on the stack or not. */
1291 rs6000_frameless_function_invocation (struct frame_info
*fi
)
1293 CORE_ADDR func_start
;
1294 struct rs6000_framedata fdata
;
1296 /* Don't even think about framelessness except on the innermost frame
1297 or if the function was interrupted by a signal. */
1298 if (fi
->next
!= NULL
&& !fi
->next
->signal_handler_caller
)
1301 func_start
= get_pc_function_start (fi
->pc
);
1303 /* If we failed to find the start of the function, it is a mistake
1304 to inspect the instructions. */
1308 /* A frame with a zero PC is usually created by dereferencing a NULL
1309 function pointer, normally causing an immediate core dump of the
1310 inferior. Mark function as frameless, as the inferior has no chance
1311 of setting up a stack frame. */
1318 (void) skip_prologue (func_start
, fi
->pc
, &fdata
);
1319 return fdata
.frameless
;
1322 /* Return the PC saved in a frame */
1325 rs6000_frame_saved_pc (struct frame_info
*fi
)
1327 CORE_ADDR func_start
;
1328 struct rs6000_framedata fdata
;
1329 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1330 int wordsize
= tdep
->wordsize
;
1332 if (fi
->signal_handler_caller
)
1333 return read_memory_addr (fi
->frame
+ SIG_FRAME_PC_OFFSET
, wordsize
);
1335 if (PC_IN_CALL_DUMMY (fi
->pc
, fi
->frame
, fi
->frame
))
1336 return generic_read_register_dummy (fi
->pc
, fi
->frame
, PC_REGNUM
);
1338 func_start
= get_pc_function_start (fi
->pc
);
1340 /* If we failed to find the start of the function, it is a mistake
1341 to inspect the instructions. */
1345 (void) skip_prologue (func_start
, fi
->pc
, &fdata
);
1347 if (fdata
.lr_offset
== 0 && fi
->next
!= NULL
)
1349 if (fi
->next
->signal_handler_caller
)
1350 return read_memory_addr (fi
->next
->frame
+ SIG_FRAME_LR_OFFSET
,
1353 return read_memory_addr (FRAME_CHAIN (fi
) + tdep
->lr_frame_offset
,
1357 if (fdata
.lr_offset
== 0)
1358 return read_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
);
1360 return read_memory_addr (FRAME_CHAIN (fi
) + fdata
.lr_offset
, wordsize
);
1363 /* If saved registers of frame FI are not known yet, read and cache them.
1364 &FDATAP contains rs6000_framedata; TDATAP can be NULL,
1365 in which case the framedata are read. */
1368 frame_get_saved_regs (struct frame_info
*fi
, struct rs6000_framedata
*fdatap
)
1370 CORE_ADDR frame_addr
;
1371 struct rs6000_framedata work_fdata
;
1372 struct gdbarch_tdep
* tdep
= gdbarch_tdep (current_gdbarch
);
1373 int wordsize
= tdep
->wordsize
;
1380 fdatap
= &work_fdata
;
1381 (void) skip_prologue (get_pc_function_start (fi
->pc
), fi
->pc
, fdatap
);
1384 frame_saved_regs_zalloc (fi
);
1386 /* If there were any saved registers, figure out parent's stack
1388 /* The following is true only if the frame doesn't have a call to
1391 if (fdatap
->saved_fpr
== 0
1392 && fdatap
->saved_gpr
== 0
1393 && fdatap
->saved_vr
== 0
1394 && fdatap
->lr_offset
== 0
1395 && fdatap
->cr_offset
== 0
1396 && fdatap
->vr_offset
== 0)
1399 /* NOTE: cagney/2002-04-14: The ->frame points to the inner-most
1400 address of the current frame. Things might be easier if the
1401 ->frame pointed to the outer-most address of the frame. In the
1402 mean time, the address of the prev frame is used as the base
1403 address of this frame. */
1404 frame_addr
= FRAME_CHAIN (fi
);
1406 /* if != -1, fdatap->saved_fpr is the smallest number of saved_fpr.
1407 All fpr's from saved_fpr to fp31 are saved. */
1409 if (fdatap
->saved_fpr
>= 0)
1412 CORE_ADDR fpr_addr
= frame_addr
+ fdatap
->fpr_offset
;
1413 for (i
= fdatap
->saved_fpr
; i
< 32; i
++)
1415 fi
->saved_regs
[FP0_REGNUM
+ i
] = fpr_addr
;
1420 /* if != -1, fdatap->saved_gpr is the smallest number of saved_gpr.
1421 All gpr's from saved_gpr to gpr31 are saved. */
1423 if (fdatap
->saved_gpr
>= 0)
1426 CORE_ADDR gpr_addr
= frame_addr
+ fdatap
->gpr_offset
;
1427 for (i
= fdatap
->saved_gpr
; i
< 32; i
++)
1429 fi
->saved_regs
[i
] = gpr_addr
;
1430 gpr_addr
+= wordsize
;
1434 /* if != -1, fdatap->saved_vr is the smallest number of saved_vr.
1435 All vr's from saved_vr to vr31 are saved. */
1436 if (tdep
->ppc_vr0_regnum
!= -1 && tdep
->ppc_vrsave_regnum
!= -1)
1438 if (fdatap
->saved_vr
>= 0)
1441 CORE_ADDR vr_addr
= frame_addr
+ fdatap
->vr_offset
;
1442 for (i
= fdatap
->saved_vr
; i
< 32; i
++)
1444 fi
->saved_regs
[tdep
->ppc_vr0_regnum
+ i
] = vr_addr
;
1445 vr_addr
+= REGISTER_RAW_SIZE (tdep
->ppc_vr0_regnum
);
1450 /* If != 0, fdatap->cr_offset is the offset from the frame that holds
1452 if (fdatap
->cr_offset
!= 0)
1453 fi
->saved_regs
[tdep
->ppc_cr_regnum
] = frame_addr
+ fdatap
->cr_offset
;
1455 /* If != 0, fdatap->lr_offset is the offset from the frame that holds
1457 if (fdatap
->lr_offset
!= 0)
1458 fi
->saved_regs
[tdep
->ppc_lr_regnum
] = frame_addr
+ fdatap
->lr_offset
;
1460 /* If != 0, fdatap->vrsave_offset is the offset from the frame that holds
1462 if (fdatap
->vrsave_offset
!= 0)
1463 fi
->saved_regs
[tdep
->ppc_vrsave_regnum
] = frame_addr
+ fdatap
->vrsave_offset
;
1466 /* Return the address of a frame. This is the inital %sp value when the frame
1467 was first allocated. For functions calling alloca(), it might be saved in
1468 an alloca register. */
1471 frame_initial_stack_address (struct frame_info
*fi
)
1474 struct rs6000_framedata fdata
;
1475 struct frame_info
*callee_fi
;
1477 /* if the initial stack pointer (frame address) of this frame is known,
1480 if (fi
->extra_info
->initial_sp
)
1481 return fi
->extra_info
->initial_sp
;
1483 /* find out if this function is using an alloca register.. */
1485 (void) skip_prologue (get_pc_function_start (fi
->pc
), fi
->pc
, &fdata
);
1487 /* if saved registers of this frame are not known yet, read and cache them. */
1489 if (!fi
->saved_regs
)
1490 frame_get_saved_regs (fi
, &fdata
);
1492 /* If no alloca register used, then fi->frame is the value of the %sp for
1493 this frame, and it is good enough. */
1495 if (fdata
.alloca_reg
< 0)
1497 fi
->extra_info
->initial_sp
= fi
->frame
;
1498 return fi
->extra_info
->initial_sp
;
1501 /* There is an alloca register, use its value, in the current frame,
1502 as the initial stack pointer. */
1504 char *tmpbuf
= alloca (MAX_REGISTER_RAW_SIZE
);
1505 if (frame_register_read (fi
, fdata
.alloca_reg
, tmpbuf
))
1507 fi
->extra_info
->initial_sp
1508 = extract_unsigned_integer (tmpbuf
,
1509 REGISTER_RAW_SIZE (fdata
.alloca_reg
));
1512 /* NOTE: cagney/2002-04-17: At present the only time
1513 frame_register_read will fail is when the register isn't
1514 available. If that does happen, use the frame. */
1515 fi
->extra_info
->initial_sp
= fi
->frame
;
1517 return fi
->extra_info
->initial_sp
;
1520 /* Describe the pointer in each stack frame to the previous stack frame
1523 /* FRAME_CHAIN takes a frame's nominal address
1524 and produces the frame's chain-pointer. */
1526 /* In the case of the RS/6000, the frame's nominal address
1527 is the address of a 4-byte word containing the calling frame's address. */
1530 rs6000_frame_chain (struct frame_info
*thisframe
)
1532 CORE_ADDR fp
, fpp
, lr
;
1533 int wordsize
= gdbarch_tdep (current_gdbarch
)->wordsize
;
1535 if (PC_IN_CALL_DUMMY (thisframe
->pc
, thisframe
->frame
, thisframe
->frame
))
1536 return thisframe
->frame
; /* dummy frame same as caller's frame */
1538 if (inside_entry_file (thisframe
->pc
) ||
1539 thisframe
->pc
== entry_point_address ())
1542 if (thisframe
->signal_handler_caller
)
1543 fp
= read_memory_addr (thisframe
->frame
+ SIG_FRAME_FP_OFFSET
,
1545 else if (thisframe
->next
!= NULL
1546 && thisframe
->next
->signal_handler_caller
1547 && FRAMELESS_FUNCTION_INVOCATION (thisframe
))
1548 /* A frameless function interrupted by a signal did not change the
1550 fp
= FRAME_FP (thisframe
);
1552 fp
= read_memory_addr ((thisframe
)->frame
, wordsize
);
1554 lr
= read_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
);
1555 if (lr
== entry_point_address ())
1556 if (fp
!= 0 && (fpp
= read_memory_addr (fp
, wordsize
)) != 0)
1557 if (PC_IN_CALL_DUMMY (lr
, fpp
, fpp
))
1563 /* Return the size of register REG when words are WORDSIZE bytes long. If REG
1564 isn't available with that word size, return 0. */
1567 regsize (const struct reg
*reg
, int wordsize
)
1569 return wordsize
== 8 ? reg
->sz64
: reg
->sz32
;
1572 /* Return the name of register number N, or null if no such register exists
1573 in the current architecture. */
1576 rs6000_register_name (int n
)
1578 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1579 const struct reg
*reg
= tdep
->regs
+ n
;
1581 if (!regsize (reg
, tdep
->wordsize
))
1586 /* Index within `registers' of the first byte of the space for
1590 rs6000_register_byte (int n
)
1592 return gdbarch_tdep (current_gdbarch
)->regoff
[n
];
1595 /* Return the number of bytes of storage in the actual machine representation
1596 for register N if that register is available, else return 0. */
1599 rs6000_register_raw_size (int n
)
1601 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1602 const struct reg
*reg
= tdep
->regs
+ n
;
1603 return regsize (reg
, tdep
->wordsize
);
1606 /* Return the GDB type object for the "standard" data type
1607 of data in register N. */
1609 static struct type
*
1610 rs6000_register_virtual_type (int n
)
1612 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1613 const struct reg
*reg
= tdep
->regs
+ n
;
1616 return builtin_type_double
;
1619 int size
= regsize (reg
, tdep
->wordsize
);
1623 return builtin_type_int64
;
1626 return builtin_type_vec128
;
1629 return builtin_type_int32
;
1635 /* For the PowerPC, it appears that the debug info marks float parameters as
1636 floats regardless of whether the function is prototyped, but the actual
1637 values are always passed in as doubles. Tell gdb to always assume that
1638 floats are passed as doubles and then converted in the callee. */
1641 rs6000_coerce_float_to_double (struct type
*formal
, struct type
*actual
)
1646 /* Return whether register N requires conversion when moving from raw format
1649 The register format for RS/6000 floating point registers is always
1650 double, we need a conversion if the memory format is float. */
1653 rs6000_register_convertible (int n
)
1655 const struct reg
*reg
= gdbarch_tdep (current_gdbarch
)->regs
+ n
;
1659 /* Convert data from raw format for register N in buffer FROM
1660 to virtual format with type TYPE in buffer TO. */
1663 rs6000_register_convert_to_virtual (int n
, struct type
*type
,
1664 char *from
, char *to
)
1666 if (TYPE_LENGTH (type
) != REGISTER_RAW_SIZE (n
))
1668 double val
= extract_floating (from
, REGISTER_RAW_SIZE (n
));
1669 store_floating (to
, TYPE_LENGTH (type
), val
);
1672 memcpy (to
, from
, REGISTER_RAW_SIZE (n
));
1675 /* Convert data from virtual format with type TYPE in buffer FROM
1676 to raw format for register N in buffer TO. */
1679 rs6000_register_convert_to_raw (struct type
*type
, int n
,
1680 char *from
, char *to
)
1682 if (TYPE_LENGTH (type
) != REGISTER_RAW_SIZE (n
))
1684 double val
= extract_floating (from
, TYPE_LENGTH (type
));
1685 store_floating (to
, REGISTER_RAW_SIZE (n
), val
);
1688 memcpy (to
, from
, REGISTER_RAW_SIZE (n
));
1692 altivec_register_p (int regno
)
1694 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1695 if (tdep
->ppc_vr0_regnum
< 0 || tdep
->ppc_vrsave_regnum
< 0)
1698 return (regno
>= tdep
->ppc_vr0_regnum
&& regno
<= tdep
->ppc_vrsave_regnum
);
1702 rs6000_do_altivec_registers (int regnum
)
1705 char *raw_buffer
= (char*) alloca (MAX_REGISTER_RAW_SIZE
);
1706 char *virtual_buffer
= (char*) alloca (MAX_REGISTER_VIRTUAL_SIZE
);
1707 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1709 for (i
= tdep
->ppc_vr0_regnum
; i
<= tdep
->ppc_vrsave_regnum
; i
++)
1711 /* If we want just one reg, check that this is the one we want. */
1712 if (regnum
!= -1 && i
!= regnum
)
1715 /* If the register name is empty, it is undefined for this
1716 processor, so don't display anything. */
1717 if (REGISTER_NAME (i
) == NULL
|| *(REGISTER_NAME (i
)) == '\0')
1720 fputs_filtered (REGISTER_NAME (i
), gdb_stdout
);
1721 print_spaces_filtered (15 - strlen (REGISTER_NAME (i
)), gdb_stdout
);
1723 /* Get the data in raw format. */
1724 if (!frame_register_read (selected_frame
, i
, raw_buffer
))
1726 printf_filtered ("*value not available*\n");
1730 /* Convert raw data to virtual format if necessary. */
1731 if (REGISTER_CONVERTIBLE (i
))
1732 REGISTER_CONVERT_TO_VIRTUAL (i
, REGISTER_VIRTUAL_TYPE (i
),
1733 raw_buffer
, virtual_buffer
);
1735 memcpy (virtual_buffer
, raw_buffer
, REGISTER_VIRTUAL_SIZE (i
));
1737 /* Print as integer in hex only. */
1738 val_print (REGISTER_VIRTUAL_TYPE (i
), virtual_buffer
, 0, 0,
1739 gdb_stdout
, 'x', 1, 0, Val_pretty_default
);
1740 printf_filtered ("\n");
1745 rs6000_altivec_registers_info (char *addr_exp
, int from_tty
)
1747 int regnum
, numregs
;
1750 if (!target_has_registers
)
1751 error ("The program has no registers now.");
1752 if (selected_frame
== NULL
)
1753 error ("No selected frame.");
1757 rs6000_do_altivec_registers (-1);
1761 numregs
= NUM_REGS
+ NUM_PSEUDO_REGS
;
1764 if (addr_exp
[0] == '$')
1767 while (*end
!= '\0' && *end
!= ' ' && *end
!= '\t')
1770 regnum
= target_map_name_to_register (addr_exp
, end
- addr_exp
);
1774 if (*addr_exp
>= '0' && *addr_exp
<= '9')
1775 regnum
= atoi (addr_exp
); /* Take a number */
1776 if (regnum
>= numregs
) /* Bad name, or bad number */
1777 error ("%.*s: invalid register", end
- addr_exp
, addr_exp
);
1780 rs6000_do_altivec_registers (regnum
);
1783 while (*addr_exp
== ' ' || *addr_exp
== '\t')
1786 while (*addr_exp
!= '\0');
1790 rs6000_do_registers_info (int regnum
, int fpregs
)
1793 int numregs
= NUM_REGS
+ NUM_PSEUDO_REGS
;
1794 char *raw_buffer
= (char*) alloca (MAX_REGISTER_RAW_SIZE
);
1795 char *virtual_buffer
= (char*) alloca (MAX_REGISTER_VIRTUAL_SIZE
);
1797 for (i
= 0; i
< numregs
; i
++)
1799 /* Decide between printing all regs, nonfloat regs, or specific reg. */
1802 if ((TYPE_CODE (REGISTER_VIRTUAL_TYPE (i
)) == TYPE_CODE_FLT
&& !fpregs
)
1803 || (altivec_register_p (i
) && !fpregs
))
1812 /* If the register name is empty, it is undefined for this
1813 processor, so don't display anything. */
1814 if (REGISTER_NAME (i
) == NULL
|| *(REGISTER_NAME (i
)) == '\0')
1817 fputs_filtered (REGISTER_NAME (i
), gdb_stdout
);
1818 print_spaces_filtered (15 - strlen (REGISTER_NAME (i
)), gdb_stdout
);
1820 /* Get the data in raw format. */
1821 if (!frame_register_read (selected_frame
, i
, raw_buffer
))
1823 printf_filtered ("*value not available*\n");
1827 /* Convert raw data to virtual format if necessary. */
1828 if (REGISTER_CONVERTIBLE (i
))
1829 REGISTER_CONVERT_TO_VIRTUAL (i
, REGISTER_VIRTUAL_TYPE (i
),
1830 raw_buffer
, virtual_buffer
);
1832 memcpy (virtual_buffer
, raw_buffer
, REGISTER_VIRTUAL_SIZE (i
));
1834 /* If virtual format is floating, print it that way, and in raw hex. */
1835 if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i
)) == TYPE_CODE_FLT
)
1839 val_print (REGISTER_VIRTUAL_TYPE (i
), virtual_buffer
, 0, 0,
1840 gdb_stdout
, 0, 1, 0, Val_pretty_default
);
1842 printf_filtered ("\t(raw 0x");
1843 for (j
= 0; j
< REGISTER_RAW_SIZE (i
); j
++)
1845 register int idx
= TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
? j
1846 : REGISTER_RAW_SIZE (i
) - 1 - j
;
1847 printf_filtered ("%02x", (unsigned char) raw_buffer
[idx
]);
1849 printf_filtered (")");
1853 /* Print the register in hex. */
1854 val_print (REGISTER_VIRTUAL_TYPE (i
), virtual_buffer
, 0, 0,
1855 gdb_stdout
, 'x', 1, 0, Val_pretty_default
);
1856 /* If not a vector register, print it also in decimal. */
1857 if (!altivec_register_p (i
))
1859 printf_filtered ("\t");
1860 val_print (REGISTER_VIRTUAL_TYPE (i
), virtual_buffer
, 0, 0,
1861 gdb_stdout
, 0, 1, 0, Val_pretty_default
);
1864 printf_filtered ("\n");
1868 /* Convert a dbx stab register number (from `r' declaration) to a gdb
1871 rs6000_stab_reg_to_regnum (int num
)
1877 regnum
= gdbarch_tdep (current_gdbarch
)->ppc_mq_regnum
;
1880 regnum
= gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
;
1883 regnum
= gdbarch_tdep (current_gdbarch
)->ppc_ctr_regnum
;
1886 regnum
= gdbarch_tdep (current_gdbarch
)->ppc_xer_regnum
;
1895 /* Store the address of the place in which to copy the structure the
1896 subroutine will return. This is called from call_function.
1898 In RS/6000, struct return addresses are passed as an extra parameter in r3.
1899 In function return, callee is not responsible of returning this address
1900 back. Since gdb needs to find it, we will store in a designated variable
1901 `rs6000_struct_return_address'. */
1904 rs6000_store_struct_return (CORE_ADDR addr
, CORE_ADDR sp
)
1906 write_register (3, addr
);
1907 rs6000_struct_return_address
= addr
;
1910 /* Write into appropriate registers a function return value
1911 of type TYPE, given in virtual format. */
1914 rs6000_store_return_value (struct type
*type
, char *valbuf
)
1916 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1918 if (TYPE_CODE (type
) == TYPE_CODE_FLT
)
1920 /* Floating point values are returned starting from FPR1 and up.
1921 Say a double_double_double type could be returned in
1922 FPR1/FPR2/FPR3 triple. */
1924 write_register_bytes (REGISTER_BYTE (FP0_REGNUM
+ 1), valbuf
,
1925 TYPE_LENGTH (type
));
1926 else if (TYPE_CODE (type
) == TYPE_CODE_ARRAY
)
1928 if (TYPE_LENGTH (type
) == 16
1929 && TYPE_VECTOR (type
))
1930 write_register_bytes (REGISTER_BYTE (tdep
->ppc_vr0_regnum
+ 2),
1931 valbuf
, TYPE_LENGTH (type
));
1934 /* Everything else is returned in GPR3 and up. */
1935 write_register_bytes (REGISTER_BYTE (gdbarch_tdep (current_gdbarch
)->ppc_gp0_regnum
+ 3),
1936 valbuf
, TYPE_LENGTH (type
));
1939 /* Extract from an array REGBUF containing the (raw) register state
1940 the address in which a function should return its structure value,
1941 as a CORE_ADDR (or an expression that can be used as one). */
1944 rs6000_extract_struct_value_address (char *regbuf
)
1946 return rs6000_struct_return_address
;
1949 /* Return whether PC is in a dummy function call.
1951 FIXME: This just checks for the end of the stack, which is broken
1952 for things like stepping through gcc nested function stubs. */
1955 rs6000_pc_in_call_dummy (CORE_ADDR pc
, CORE_ADDR sp
, CORE_ADDR fp
)
1957 return sp
< pc
&& pc
< fp
;
1960 /* Hook called when a new child process is started. */
1963 rs6000_create_inferior (int pid
)
1965 if (rs6000_set_host_arch_hook
)
1966 rs6000_set_host_arch_hook (pid
);
1969 /* Support for CONVERT_FROM_FUNC_PTR_ADDR(ADDR).
1971 Usually a function pointer's representation is simply the address
1972 of the function. On the RS/6000 however, a function pointer is
1973 represented by a pointer to a TOC entry. This TOC entry contains
1974 three words, the first word is the address of the function, the
1975 second word is the TOC pointer (r2), and the third word is the
1976 static chain value. Throughout GDB it is currently assumed that a
1977 function pointer contains the address of the function, which is not
1978 easy to fix. In addition, the conversion of a function address to
1979 a function pointer would require allocation of a TOC entry in the
1980 inferior's memory space, with all its drawbacks. To be able to
1981 call C++ virtual methods in the inferior (which are called via
1982 function pointers), find_function_addr uses this function to get the
1983 function address from a function pointer. */
1985 /* Return real function address if ADDR (a function pointer) is in the data
1986 space and is therefore a special function pointer. */
1989 rs6000_convert_from_func_ptr_addr (CORE_ADDR addr
)
1991 struct obj_section
*s
;
1993 s
= find_pc_section (addr
);
1994 if (s
&& s
->the_bfd_section
->flags
& SEC_CODE
)
1997 /* ADDR is in the data space, so it's a special function pointer. */
1998 return read_memory_addr (addr
, gdbarch_tdep (current_gdbarch
)->wordsize
);
2002 /* Handling the various POWER/PowerPC variants. */
2005 /* The arrays here called registers_MUMBLE hold information about available
2008 For each family of PPC variants, I've tried to isolate out the
2009 common registers and put them up front, so that as long as you get
2010 the general family right, GDB will correctly identify the registers
2011 common to that family. The common register sets are:
2013 For the 60x family: hid0 hid1 iabr dabr pir
2015 For the 505 and 860 family: eie eid nri
2017 For the 403 and 403GC: icdbdr esr dear evpr cdbcr tsr tcr pit tbhi
2018 tblo srr2 srr3 dbsr dbcr iac1 iac2 dac1 dac2 dccr iccr pbl1
2021 Most of these register groups aren't anything formal. I arrived at
2022 them by looking at the registers that occurred in more than one
2025 Note: kevinb/2002-04-30: Support for the fpscr register was added
2026 during April, 2002. Slot 70 is being used for PowerPC and slot 71
2027 for Power. For PowerPC, slot 70 was unused and was already in the
2028 PPC_UISA_SPRS which is ideally where fpscr should go. For Power,
2029 slot 70 was being used for "mq", so the next available slot (71)
2030 was chosen. It would have been nice to be able to make the
2031 register numbers the same across processor cores, but this wasn't
2032 possible without either 1) renumbering some registers for some
2033 processors or 2) assigning fpscr to a really high slot that's
2034 larger than any current register number. Doing (1) is bad because
2035 existing stubs would break. Doing (2) is undesirable because it
2036 would introduce a really large gap between fpscr and the rest of
2037 the registers for most processors. */
2039 /* Convenience macros for populating register arrays. */
2041 /* Within another macro, convert S to a string. */
2045 /* Return a struct reg defining register NAME that's 32 bits on 32-bit systems
2046 and 64 bits on 64-bit systems. */
2047 #define R(name) { STR(name), 4, 8, 0, 0 }
2049 /* Return a struct reg defining register NAME that's 32 bits on all
2051 #define R4(name) { STR(name), 4, 4, 0, 0 }
2053 /* Return a struct reg defining register NAME that's 64 bits on all
2055 #define R8(name) { STR(name), 8, 8, 0, 0 }
2057 /* Return a struct reg defining register NAME that's 128 bits on all
2059 #define R16(name) { STR(name), 16, 16, 0, 0 }
2061 /* Return a struct reg defining floating-point register NAME. */
2062 #define F(name) { STR(name), 8, 8, 1, 0 }
2064 /* Return a struct reg defining a pseudo register NAME. */
2065 #define P(name) { STR(name), 4, 8, 0, 1}
2067 /* Return a struct reg defining register NAME that's 32 bits on 32-bit
2068 systems and that doesn't exist on 64-bit systems. */
2069 #define R32(name) { STR(name), 4, 0, 0, 0 }
2071 /* Return a struct reg defining register NAME that's 64 bits on 64-bit
2072 systems and that doesn't exist on 32-bit systems. */
2073 #define R64(name) { STR(name), 0, 8, 0, 0 }
2075 /* Return a struct reg placeholder for a register that doesn't exist. */
2076 #define R0 { 0, 0, 0, 0, 0 }
2078 /* UISA registers common across all architectures, including POWER. */
2080 #define COMMON_UISA_REGS \
2081 /* 0 */ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), \
2082 /* 8 */ R(r8), R(r9), R(r10),R(r11),R(r12),R(r13),R(r14),R(r15), \
2083 /* 16 */ R(r16),R(r17),R(r18),R(r19),R(r20),R(r21),R(r22),R(r23), \
2084 /* 24 */ R(r24),R(r25),R(r26),R(r27),R(r28),R(r29),R(r30),R(r31), \
2085 /* 32 */ F(f0), F(f1), F(f2), F(f3), F(f4), F(f5), F(f6), F(f7), \
2086 /* 40 */ F(f8), F(f9), F(f10),F(f11),F(f12),F(f13),F(f14),F(f15), \
2087 /* 48 */ F(f16),F(f17),F(f18),F(f19),F(f20),F(f21),F(f22),F(f23), \
2088 /* 56 */ F(f24),F(f25),F(f26),F(f27),F(f28),F(f29),F(f30),F(f31), \
2089 /* 64 */ R(pc), R(ps)
2091 #define COMMON_UISA_NOFP_REGS \
2092 /* 0 */ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), \
2093 /* 8 */ R(r8), R(r9), R(r10),R(r11),R(r12),R(r13),R(r14),R(r15), \
2094 /* 16 */ R(r16),R(r17),R(r18),R(r19),R(r20),R(r21),R(r22),R(r23), \
2095 /* 24 */ R(r24),R(r25),R(r26),R(r27),R(r28),R(r29),R(r30),R(r31), \
2096 /* 32 */ R0, R0, R0, R0, R0, R0, R0, R0, \
2097 /* 40 */ R0, R0, R0, R0, R0, R0, R0, R0, \
2098 /* 48 */ R0, R0, R0, R0, R0, R0, R0, R0, \
2099 /* 56 */ R0, R0, R0, R0, R0, R0, R0, R0, \
2100 /* 64 */ R(pc), R(ps)
2102 /* UISA-level SPRs for PowerPC. */
2103 #define PPC_UISA_SPRS \
2104 /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R4(fpscr)
2106 /* Segment registers, for PowerPC. */
2107 #define PPC_SEGMENT_REGS \
2108 /* 71 */ R32(sr0), R32(sr1), R32(sr2), R32(sr3), \
2109 /* 75 */ R32(sr4), R32(sr5), R32(sr6), R32(sr7), \
2110 /* 79 */ R32(sr8), R32(sr9), R32(sr10), R32(sr11), \
2111 /* 83 */ R32(sr12), R32(sr13), R32(sr14), R32(sr15)
2113 /* OEA SPRs for PowerPC. */
2114 #define PPC_OEA_SPRS \
2116 /* 88 */ R(ibat0u), R(ibat0l), R(ibat1u), R(ibat1l), \
2117 /* 92 */ R(ibat2u), R(ibat2l), R(ibat3u), R(ibat3l), \
2118 /* 96 */ R(dbat0u), R(dbat0l), R(dbat1u), R(dbat1l), \
2119 /* 100 */ R(dbat2u), R(dbat2l), R(dbat3u), R(dbat3l), \
2120 /* 104 */ R(sdr1), R64(asr), R(dar), R4(dsisr), \
2121 /* 108 */ R(sprg0), R(sprg1), R(sprg2), R(sprg3), \
2122 /* 112 */ R(srr0), R(srr1), R(tbl), R(tbu), \
2123 /* 116 */ R4(dec), R(dabr), R4(ear)
2125 /* AltiVec registers */
2126 #define PPC_ALTIVEC_REGS \
2127 /*119*/R16(vr0), R16(vr1), R16(vr2), R16(vr3), R16(vr4), R16(vr5), R16(vr6), R16(vr7), \
2128 /*127*/R16(vr8), R16(vr9), R16(vr10),R16(vr11),R16(vr12),R16(vr13),R16(vr14),R16(vr15), \
2129 /*135*/R16(vr16),R16(vr17),R16(vr18),R16(vr19),R16(vr20),R16(vr21),R16(vr22),R16(vr23), \
2130 /*143*/R16(vr24),R16(vr25),R16(vr26),R16(vr27),R16(vr28),R16(vr29),R16(vr30),R16(vr31), \
2131 /*151*/R4(vscr), R4(vrsave)
2133 /* IBM POWER (pre-PowerPC) architecture, user-level view. We only cover
2134 user-level SPR's. */
2135 static const struct reg registers_power
[] =
2138 /* 66 */ R4(cnd
), R(lr
), R(cnt
), R4(xer
), R4(mq
),
2142 /* PowerPC UISA - a PPC processor as viewed by user-level code. A UISA-only
2143 view of the PowerPC. */
2144 static const struct reg registers_powerpc
[] =
2151 /* PowerPC UISA - a PPC processor as viewed by user-level
2152 code, but without floating point registers. */
2153 static const struct reg registers_powerpc_nofp
[] =
2155 COMMON_UISA_NOFP_REGS
,
2159 /* IBM PowerPC 403. */
2160 static const struct reg registers_403
[] =
2166 /* 119 */ R(icdbdr
), R(esr
), R(dear
), R(evpr
),
2167 /* 123 */ R(cdbcr
), R(tsr
), R(tcr
), R(pit
),
2168 /* 127 */ R(tbhi
), R(tblo
), R(srr2
), R(srr3
),
2169 /* 131 */ R(dbsr
), R(dbcr
), R(iac1
), R(iac2
),
2170 /* 135 */ R(dac1
), R(dac2
), R(dccr
), R(iccr
),
2171 /* 139 */ R(pbl1
), R(pbu1
), R(pbl2
), R(pbu2
)
2174 /* IBM PowerPC 403GC. */
2175 static const struct reg registers_403GC
[] =
2181 /* 119 */ R(icdbdr
), R(esr
), R(dear
), R(evpr
),
2182 /* 123 */ R(cdbcr
), R(tsr
), R(tcr
), R(pit
),
2183 /* 127 */ R(tbhi
), R(tblo
), R(srr2
), R(srr3
),
2184 /* 131 */ R(dbsr
), R(dbcr
), R(iac1
), R(iac2
),
2185 /* 135 */ R(dac1
), R(dac2
), R(dccr
), R(iccr
),
2186 /* 139 */ R(pbl1
), R(pbu1
), R(pbl2
), R(pbu2
),
2187 /* 143 */ R(zpr
), R(pid
), R(sgr
), R(dcwr
),
2188 /* 147 */ R(tbhu
), R(tblu
)
2191 /* Motorola PowerPC 505. */
2192 static const struct reg registers_505
[] =
2198 /* 119 */ R(eie
), R(eid
), R(nri
)
2201 /* Motorola PowerPC 860 or 850. */
2202 static const struct reg registers_860
[] =
2208 /* 119 */ R(eie
), R(eid
), R(nri
), R(cmpa
),
2209 /* 123 */ R(cmpb
), R(cmpc
), R(cmpd
), R(icr
),
2210 /* 127 */ R(der
), R(counta
), R(countb
), R(cmpe
),
2211 /* 131 */ R(cmpf
), R(cmpg
), R(cmph
), R(lctrl1
),
2212 /* 135 */ R(lctrl2
), R(ictrl
), R(bar
), R(ic_cst
),
2213 /* 139 */ R(ic_adr
), R(ic_dat
), R(dc_cst
), R(dc_adr
),
2214 /* 143 */ R(dc_dat
), R(dpdr
), R(dpir
), R(immr
),
2215 /* 147 */ R(mi_ctr
), R(mi_ap
), R(mi_epn
), R(mi_twc
),
2216 /* 151 */ R(mi_rpn
), R(md_ctr
), R(m_casid
), R(md_ap
),
2217 /* 155 */ R(md_epn
), R(md_twb
), R(md_twc
), R(md_rpn
),
2218 /* 159 */ R(m_tw
), R(mi_dbcam
), R(mi_dbram0
), R(mi_dbram1
),
2219 /* 163 */ R(md_dbcam
), R(md_dbram0
), R(md_dbram1
)
2222 /* Motorola PowerPC 601. Note that the 601 has different register numbers
2223 for reading and writing RTCU and RTCL. However, how one reads and writes a
2224 register is the stub's problem. */
2225 static const struct reg registers_601
[] =
2231 /* 119 */ R(hid0
), R(hid1
), R(iabr
), R(dabr
),
2232 /* 123 */ R(pir
), R(mq
), R(rtcu
), R(rtcl
)
2235 /* Motorola PowerPC 602. */
2236 static const struct reg registers_602
[] =
2242 /* 119 */ R(hid0
), R(hid1
), R(iabr
), R0
,
2243 /* 123 */ R0
, R(tcr
), R(ibr
), R(esassr
),
2244 /* 127 */ R(sebr
), R(ser
), R(sp
), R(lt
)
2247 /* Motorola/IBM PowerPC 603 or 603e. */
2248 static const struct reg registers_603
[] =
2254 /* 119 */ R(hid0
), R(hid1
), R(iabr
), R0
,
2255 /* 123 */ R0
, R(dmiss
), R(dcmp
), R(hash1
),
2256 /* 127 */ R(hash2
), R(imiss
), R(icmp
), R(rpa
)
2259 /* Motorola PowerPC 604 or 604e. */
2260 static const struct reg registers_604
[] =
2266 /* 119 */ R(hid0
), R(hid1
), R(iabr
), R(dabr
),
2267 /* 123 */ R(pir
), R(mmcr0
), R(pmc1
), R(pmc2
),
2268 /* 127 */ R(sia
), R(sda
)
2271 /* Motorola/IBM PowerPC 750 or 740. */
2272 static const struct reg registers_750
[] =
2278 /* 119 */ R(hid0
), R(hid1
), R(iabr
), R(dabr
),
2279 /* 123 */ R0
, R(ummcr0
), R(upmc1
), R(upmc2
),
2280 /* 127 */ R(usia
), R(ummcr1
), R(upmc3
), R(upmc4
),
2281 /* 131 */ R(mmcr0
), R(pmc1
), R(pmc2
), R(sia
),
2282 /* 135 */ R(mmcr1
), R(pmc3
), R(pmc4
), R(l2cr
),
2283 /* 139 */ R(ictc
), R(thrm1
), R(thrm2
), R(thrm3
)
2287 /* Motorola PowerPC 7400. */
2288 static const struct reg registers_7400
[] =
2290 /* gpr0-gpr31, fpr0-fpr31 */
2292 /* ctr, xre, lr, cr */
2297 /* vr0-vr31, vrsave, vscr */
2299 /* FIXME? Add more registers? */
2302 /* Information about a particular processor variant. */
2306 /* Name of this variant. */
2309 /* English description of the variant. */
2312 /* bfd_arch_info.arch corresponding to variant. */
2313 enum bfd_architecture arch
;
2315 /* bfd_arch_info.mach corresponding to variant. */
2318 /* Number of real registers. */
2321 /* Number of pseudo registers. */
2324 /* Number of total registers (the sum of nregs and npregs). */
2327 /* Table of register names; registers[R] is the name of the register
2329 const struct reg
*regs
;
2332 #define tot_num_registers(list) (sizeof (list) / sizeof((list)[0]))
2335 num_registers (const struct reg
*reg_list
, int num_tot_regs
)
2340 for (i
= 0; i
< num_tot_regs
; i
++)
2341 if (!reg_list
[i
].pseudo
)
2348 num_pseudo_registers (const struct reg
*reg_list
, int num_tot_regs
)
2353 for (i
= 0; i
< num_tot_regs
; i
++)
2354 if (reg_list
[i
].pseudo
)
2361 /* Information in this table comes from the following web sites:
2362 IBM: http://www.chips.ibm.com:80/products/embedded/
2363 Motorola: http://www.mot.com/SPS/PowerPC/
2365 I'm sure I've got some of the variant descriptions not quite right.
2366 Please report any inaccuracies you find to GDB's maintainer.
2368 If you add entries to this table, please be sure to allow the new
2369 value as an argument to the --with-cpu flag, in configure.in. */
2371 static struct variant variants
[] =
2374 {"powerpc", "PowerPC user-level", bfd_arch_powerpc
,
2375 bfd_mach_ppc
, -1, -1, tot_num_registers (registers_powerpc
),
2377 {"power", "POWER user-level", bfd_arch_rs6000
,
2378 bfd_mach_rs6k
, -1, -1, tot_num_registers (registers_power
),
2380 {"403", "IBM PowerPC 403", bfd_arch_powerpc
,
2381 bfd_mach_ppc_403
, -1, -1, tot_num_registers (registers_403
),
2383 {"601", "Motorola PowerPC 601", bfd_arch_powerpc
,
2384 bfd_mach_ppc_601
, -1, -1, tot_num_registers (registers_601
),
2386 {"602", "Motorola PowerPC 602", bfd_arch_powerpc
,
2387 bfd_mach_ppc_602
, -1, -1, tot_num_registers (registers_602
),
2389 {"603", "Motorola/IBM PowerPC 603 or 603e", bfd_arch_powerpc
,
2390 bfd_mach_ppc_603
, -1, -1, tot_num_registers (registers_603
),
2392 {"604", "Motorola PowerPC 604 or 604e", bfd_arch_powerpc
,
2393 604, -1, -1, tot_num_registers (registers_604
),
2395 {"403GC", "IBM PowerPC 403GC", bfd_arch_powerpc
,
2396 bfd_mach_ppc_403gc
, -1, -1, tot_num_registers (registers_403GC
),
2398 {"505", "Motorola PowerPC 505", bfd_arch_powerpc
,
2399 bfd_mach_ppc_505
, -1, -1, tot_num_registers (registers_505
),
2401 {"860", "Motorola PowerPC 860 or 850", bfd_arch_powerpc
,
2402 bfd_mach_ppc_860
, -1, -1, tot_num_registers (registers_860
),
2404 {"750", "Motorola/IBM PowerPC 750 or 740", bfd_arch_powerpc
,
2405 bfd_mach_ppc_750
, -1, -1, tot_num_registers (registers_750
),
2407 {"7400", "Motorola/IBM PowerPC 7400 (G4)", bfd_arch_powerpc
,
2408 bfd_mach_ppc_7400
, -1, -1, tot_num_registers (registers_7400
),
2412 {"powerpc64", "PowerPC 64-bit user-level", bfd_arch_powerpc
,
2413 bfd_mach_ppc64
, -1, -1, tot_num_registers (registers_powerpc
),
2415 {"620", "Motorola PowerPC 620", bfd_arch_powerpc
,
2416 bfd_mach_ppc_620
, -1, -1, tot_num_registers (registers_powerpc
),
2418 {"630", "Motorola PowerPC 630", bfd_arch_powerpc
,
2419 bfd_mach_ppc_630
, -1, -1, tot_num_registers (registers_powerpc
),
2421 {"a35", "PowerPC A35", bfd_arch_powerpc
,
2422 bfd_mach_ppc_a35
, -1, -1, tot_num_registers (registers_powerpc
),
2424 {"rs64ii", "PowerPC rs64ii", bfd_arch_powerpc
,
2425 bfd_mach_ppc_rs64ii
, -1, -1, tot_num_registers (registers_powerpc
),
2427 {"rs64iii", "PowerPC rs64iii", bfd_arch_powerpc
,
2428 bfd_mach_ppc_rs64iii
, -1, -1, tot_num_registers (registers_powerpc
),
2431 /* FIXME: I haven't checked the register sets of the following. */
2432 {"rs1", "IBM POWER RS1", bfd_arch_rs6000
,
2433 bfd_mach_rs6k_rs1
, -1, -1, tot_num_registers (registers_power
),
2435 {"rsc", "IBM POWER RSC", bfd_arch_rs6000
,
2436 bfd_mach_rs6k_rsc
, -1, -1, tot_num_registers (registers_power
),
2438 {"rs2", "IBM POWER RS2", bfd_arch_rs6000
,
2439 bfd_mach_rs6k_rs2
, -1, -1, tot_num_registers (registers_power
),
2442 {0, 0, 0, 0, 0, 0, 0, 0}
2445 /* Initialize the number of registers and pseudo registers in each variant. */
2448 init_variants (void)
2452 for (v
= variants
; v
->name
; v
++)
2455 v
->nregs
= num_registers (v
->regs
, v
->num_tot_regs
);
2456 if (v
->npregs
== -1)
2457 v
->npregs
= num_pseudo_registers (v
->regs
, v
->num_tot_regs
);
2461 /* Return the variant corresponding to architecture ARCH and machine number
2462 MACH. If no such variant exists, return null. */
2464 static const struct variant
*
2465 find_variant_by_arch (enum bfd_architecture arch
, unsigned long mach
)
2467 const struct variant
*v
;
2469 for (v
= variants
; v
->name
; v
++)
2470 if (arch
== v
->arch
&& mach
== v
->mach
)
2477 gdb_print_insn_powerpc (bfd_vma memaddr
, disassemble_info
*info
)
2479 if (TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
)
2480 return print_insn_big_powerpc (memaddr
, info
);
2482 return print_insn_little_powerpc (memaddr
, info
);
2485 /* Initialize the current architecture based on INFO. If possible, re-use an
2486 architecture from ARCHES, which is a list of architectures already created
2487 during this debugging session.
2489 Called e.g. at program startup, when reading a core file, and when reading
2492 static struct gdbarch
*
2493 rs6000_gdbarch_init (struct gdbarch_info info
, struct gdbarch_list
*arches
)
2495 struct gdbarch
*gdbarch
;
2496 struct gdbarch_tdep
*tdep
;
2497 int wordsize
, from_xcoff_exec
, from_elf_exec
, power
, i
, off
;
2499 const struct variant
*v
;
2500 enum bfd_architecture arch
;
2504 enum gdb_osabi osabi
= GDB_OSABI_UNKNOWN
;
2506 from_xcoff_exec
= info
.abfd
&& info
.abfd
->format
== bfd_object
&&
2507 bfd_get_flavour (info
.abfd
) == bfd_target_xcoff_flavour
;
2509 from_elf_exec
= info
.abfd
&& info
.abfd
->format
== bfd_object
&&
2510 bfd_get_flavour (info
.abfd
) == bfd_target_elf_flavour
;
2512 sysv_abi
= info
.abfd
&& bfd_get_flavour (info
.abfd
) == bfd_target_elf_flavour
;
2515 osabi
= gdbarch_lookup_osabi (info
.abfd
);
2517 /* Check word size. If INFO is from a binary file, infer it from
2518 that, else choose a likely default. */
2519 if (from_xcoff_exec
)
2521 if (bfd_xcoff_is_xcoff64 (info
.abfd
))
2526 else if (from_elf_exec
)
2528 if (elf_elfheader (info
.abfd
)->e_ident
[EI_CLASS
] == ELFCLASS64
)
2535 if (info
.bfd_arch_info
!= NULL
&& info
.bfd_arch_info
->bits_per_word
!= 0)
2536 wordsize
= info
.bfd_arch_info
->bits_per_word
/
2537 info
.bfd_arch_info
->bits_per_byte
;
2542 /* Find a candidate among extant architectures. */
2543 for (arches
= gdbarch_list_lookup_by_info (arches
, &info
);
2545 arches
= gdbarch_list_lookup_by_info (arches
->next
, &info
))
2547 /* Word size in the various PowerPC bfd_arch_info structs isn't
2548 meaningful, because 64-bit CPUs can run in 32-bit mode. So, perform
2549 separate word size check. */
2550 tdep
= gdbarch_tdep (arches
->gdbarch
);
2551 if (tdep
&& tdep
->wordsize
== wordsize
&& tdep
->osabi
== osabi
)
2552 return arches
->gdbarch
;
2555 /* None found, create a new architecture from INFO, whose bfd_arch_info
2556 validity depends on the source:
2557 - executable useless
2558 - rs6000_host_arch() good
2560 - "set arch" trust blindly
2561 - GDB startup useless but harmless */
2563 if (!from_xcoff_exec
)
2565 arch
= info
.bfd_arch_info
->arch
;
2566 mach
= info
.bfd_arch_info
->mach
;
2570 arch
= bfd_arch_powerpc
;
2572 bfd_default_set_arch_mach (&abfd
, arch
, mach
);
2573 info
.bfd_arch_info
= bfd_get_arch_info (&abfd
);
2575 tdep
= xmalloc (sizeof (struct gdbarch_tdep
));
2576 tdep
->wordsize
= wordsize
;
2577 tdep
->osabi
= osabi
;
2578 gdbarch
= gdbarch_alloc (&info
, tdep
);
2579 power
= arch
== bfd_arch_rs6000
;
2581 /* Initialize the number of real and pseudo registers in each variant. */
2584 /* Choose variant. */
2585 v
= find_variant_by_arch (arch
, mach
);
2589 tdep
->regs
= v
->regs
;
2591 tdep
->ppc_gp0_regnum
= 0;
2592 tdep
->ppc_gplast_regnum
= 31;
2593 tdep
->ppc_toc_regnum
= 2;
2594 tdep
->ppc_ps_regnum
= 65;
2595 tdep
->ppc_cr_regnum
= 66;
2596 tdep
->ppc_lr_regnum
= 67;
2597 tdep
->ppc_ctr_regnum
= 68;
2598 tdep
->ppc_xer_regnum
= 69;
2599 if (v
->mach
== bfd_mach_ppc_601
)
2600 tdep
->ppc_mq_regnum
= 124;
2602 tdep
->ppc_mq_regnum
= 70;
2604 tdep
->ppc_mq_regnum
= -1;
2605 tdep
->ppc_fpscr_regnum
= power
? 71 : 70;
2607 if (v
->arch
== bfd_arch_powerpc
)
2611 tdep
->ppc_vr0_regnum
= 71;
2612 tdep
->ppc_vrsave_regnum
= 104;
2614 case bfd_mach_ppc_7400
:
2615 tdep
->ppc_vr0_regnum
= 119;
2616 tdep
->ppc_vrsave_regnum
= 153;
2619 tdep
->ppc_vr0_regnum
= -1;
2620 tdep
->ppc_vrsave_regnum
= -1;
2624 /* Set lr_frame_offset. */
2626 tdep
->lr_frame_offset
= 16;
2628 tdep
->lr_frame_offset
= 4;
2630 tdep
->lr_frame_offset
= 8;
2632 /* Calculate byte offsets in raw register array. */
2633 tdep
->regoff
= xmalloc (v
->num_tot_regs
* sizeof (int));
2634 for (i
= off
= 0; i
< v
->num_tot_regs
; i
++)
2636 tdep
->regoff
[i
] = off
;
2637 off
+= regsize (v
->regs
+ i
, wordsize
);
2640 /* Select instruction printer. */
2642 set_gdbarch_print_insn (gdbarch
, print_insn_rs6000
);
2644 set_gdbarch_print_insn (gdbarch
, gdb_print_insn_powerpc
);
2646 set_gdbarch_read_pc (gdbarch
, generic_target_read_pc
);
2647 set_gdbarch_write_pc (gdbarch
, generic_target_write_pc
);
2648 set_gdbarch_read_fp (gdbarch
, generic_target_read_fp
);
2649 set_gdbarch_read_sp (gdbarch
, generic_target_read_sp
);
2650 set_gdbarch_write_sp (gdbarch
, generic_target_write_sp
);
2652 set_gdbarch_num_regs (gdbarch
, v
->nregs
);
2653 set_gdbarch_sp_regnum (gdbarch
, 1);
2654 set_gdbarch_fp_regnum (gdbarch
, 1);
2655 set_gdbarch_pc_regnum (gdbarch
, 64);
2656 set_gdbarch_register_name (gdbarch
, rs6000_register_name
);
2657 set_gdbarch_register_size (gdbarch
, wordsize
);
2658 set_gdbarch_register_bytes (gdbarch
, off
);
2659 set_gdbarch_register_byte (gdbarch
, rs6000_register_byte
);
2660 set_gdbarch_register_raw_size (gdbarch
, rs6000_register_raw_size
);
2661 set_gdbarch_max_register_raw_size (gdbarch
, 16);
2662 set_gdbarch_register_virtual_size (gdbarch
, generic_register_size
);
2663 set_gdbarch_max_register_virtual_size (gdbarch
, 16);
2664 set_gdbarch_register_virtual_type (gdbarch
, rs6000_register_virtual_type
);
2665 set_gdbarch_do_registers_info (gdbarch
, rs6000_do_registers_info
);
2667 set_gdbarch_ptr_bit (gdbarch
, wordsize
* TARGET_CHAR_BIT
);
2668 set_gdbarch_short_bit (gdbarch
, 2 * TARGET_CHAR_BIT
);
2669 set_gdbarch_int_bit (gdbarch
, 4 * TARGET_CHAR_BIT
);
2670 set_gdbarch_long_bit (gdbarch
, wordsize
* TARGET_CHAR_BIT
);
2671 set_gdbarch_long_long_bit (gdbarch
, 8 * TARGET_CHAR_BIT
);
2672 set_gdbarch_float_bit (gdbarch
, 4 * TARGET_CHAR_BIT
);
2673 set_gdbarch_double_bit (gdbarch
, 8 * TARGET_CHAR_BIT
);
2674 set_gdbarch_long_double_bit (gdbarch
, 8 * TARGET_CHAR_BIT
);
2675 set_gdbarch_char_signed (gdbarch
, 0);
2677 set_gdbarch_use_generic_dummy_frames (gdbarch
, 1);
2678 set_gdbarch_call_dummy_length (gdbarch
, 0);
2679 set_gdbarch_call_dummy_location (gdbarch
, AT_ENTRY_POINT
);
2680 set_gdbarch_call_dummy_address (gdbarch
, entry_point_address
);
2681 set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch
, 1);
2682 set_gdbarch_call_dummy_breakpoint_offset (gdbarch
, 0);
2683 set_gdbarch_call_dummy_start_offset (gdbarch
, 0);
2684 set_gdbarch_pc_in_call_dummy (gdbarch
, generic_pc_in_call_dummy
);
2685 set_gdbarch_call_dummy_p (gdbarch
, 1);
2686 set_gdbarch_call_dummy_stack_adjust_p (gdbarch
, 0);
2687 set_gdbarch_get_saved_register (gdbarch
, generic_unwind_get_saved_register
);
2688 set_gdbarch_fix_call_dummy (gdbarch
, rs6000_fix_call_dummy
);
2689 set_gdbarch_push_dummy_frame (gdbarch
, generic_push_dummy_frame
);
2690 set_gdbarch_save_dummy_frame_tos (gdbarch
, generic_save_dummy_frame_tos
);
2691 set_gdbarch_push_return_address (gdbarch
, ppc_push_return_address
);
2692 set_gdbarch_believe_pcc_promotion (gdbarch
, 1);
2693 set_gdbarch_coerce_float_to_double (gdbarch
, rs6000_coerce_float_to_double
);
2695 set_gdbarch_register_convertible (gdbarch
, rs6000_register_convertible
);
2696 set_gdbarch_register_convert_to_virtual (gdbarch
, rs6000_register_convert_to_virtual
);
2697 set_gdbarch_register_convert_to_raw (gdbarch
, rs6000_register_convert_to_raw
);
2698 set_gdbarch_stab_reg_to_regnum (gdbarch
, rs6000_stab_reg_to_regnum
);
2700 set_gdbarch_deprecated_extract_return_value (gdbarch
, rs6000_extract_return_value
);
2702 /* Note: kevinb/2002-04-12: I'm not convinced that rs6000_push_arguments()
2703 is correct for the SysV ABI when the wordsize is 8, but I'm also
2704 fairly certain that ppc_sysv_abi_push_arguments() will give even
2705 worse results since it only works for 32-bit code. So, for the moment,
2706 we're better off calling rs6000_push_arguments() since it works for
2707 64-bit code. At some point in the future, this matter needs to be
2709 if (sysv_abi
&& wordsize
== 4)
2710 set_gdbarch_push_arguments (gdbarch
, ppc_sysv_abi_push_arguments
);
2712 set_gdbarch_push_arguments (gdbarch
, rs6000_push_arguments
);
2714 set_gdbarch_store_struct_return (gdbarch
, rs6000_store_struct_return
);
2715 set_gdbarch_store_return_value (gdbarch
, rs6000_store_return_value
);
2716 set_gdbarch_deprecated_extract_struct_value_address (gdbarch
, rs6000_extract_struct_value_address
);
2717 set_gdbarch_pop_frame (gdbarch
, rs6000_pop_frame
);
2719 set_gdbarch_skip_prologue (gdbarch
, rs6000_skip_prologue
);
2720 set_gdbarch_inner_than (gdbarch
, core_addr_lessthan
);
2721 set_gdbarch_decr_pc_after_break (gdbarch
, 0);
2722 set_gdbarch_function_start_offset (gdbarch
, 0);
2723 set_gdbarch_breakpoint_from_pc (gdbarch
, rs6000_breakpoint_from_pc
);
2725 /* Not sure on this. FIXMEmgo */
2726 set_gdbarch_frame_args_skip (gdbarch
, 8);
2729 set_gdbarch_use_struct_convention (gdbarch
,
2730 ppc_sysv_abi_use_struct_convention
);
2732 set_gdbarch_use_struct_convention (gdbarch
,
2733 generic_use_struct_convention
);
2735 set_gdbarch_frame_chain_valid (gdbarch
, file_frame_chain_valid
);
2737 set_gdbarch_frameless_function_invocation (gdbarch
,
2738 rs6000_frameless_function_invocation
);
2739 set_gdbarch_frame_chain (gdbarch
, rs6000_frame_chain
);
2740 set_gdbarch_frame_saved_pc (gdbarch
, rs6000_frame_saved_pc
);
2742 set_gdbarch_frame_init_saved_regs (gdbarch
, rs6000_frame_init_saved_regs
);
2743 set_gdbarch_init_extra_frame_info (gdbarch
, rs6000_init_extra_frame_info
);
2747 /* Handle RS/6000 function pointers (which are really function
2749 set_gdbarch_convert_from_func_ptr_addr (gdbarch
,
2750 rs6000_convert_from_func_ptr_addr
);
2752 set_gdbarch_frame_args_address (gdbarch
, rs6000_frame_args_address
);
2753 set_gdbarch_frame_locals_address (gdbarch
, rs6000_frame_args_address
);
2754 set_gdbarch_saved_pc_after_call (gdbarch
, rs6000_saved_pc_after_call
);
2756 /* We can't tell how many args there are
2757 now that the C compiler delays popping them. */
2758 set_gdbarch_frame_num_args (gdbarch
, frame_num_args_unknown
);
2760 /* Hook in ABI-specific overrides, if they have been registered. */
2761 gdbarch_init_osabi (info
, gdbarch
, osabi
);
2767 rs6000_dump_tdep (struct gdbarch
*current_gdbarch
, struct ui_file
*file
)
2769 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
2774 fprintf_unfiltered (file
, "rs6000_dump_tdep: OS ABI = %s\n",
2775 gdbarch_osabi_name (tdep
->osabi
));
2778 static struct cmd_list_element
*info_powerpc_cmdlist
= NULL
;
2781 rs6000_info_powerpc_command (char *args
, int from_tty
)
2783 help_list (info_powerpc_cmdlist
, "info powerpc ", class_info
, gdb_stdout
);
2786 /* Initialization code. */
2789 _initialize_rs6000_tdep (void)
2791 gdbarch_register (bfd_arch_rs6000
, rs6000_gdbarch_init
, rs6000_dump_tdep
);
2792 gdbarch_register (bfd_arch_powerpc
, rs6000_gdbarch_init
, rs6000_dump_tdep
);
2794 /* Add root prefix command for "info powerpc" commands */
2795 add_prefix_cmd ("powerpc", class_info
, rs6000_info_powerpc_command
,
2796 "Various POWERPC info specific commands.",
2797 &info_powerpc_cmdlist
, "info powerpc ", 0, &infolist
);
2799 add_cmd ("altivec", class_info
, rs6000_altivec_registers_info
,
2800 "Display the contents of the AltiVec registers.",
2801 &info_powerpc_cmdlist
);