gdb/target.h

   1 /* Interface between GDB and target environments, including files and processes
   2
   3    Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   4    2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
   5    Free Software Foundation, Inc.
   6
   7    Contributed by Cygnus Support.  Written by John Gilmore.
   8
   9    This file is part of GDB.
  10
  11    This program is free software; you can redistribute it and/or modify
  12    it under the terms of the GNU General Public License as published by
  13    the Free Software Foundation; either version 3 of the License, or
  14    (at your option) any later version.
  15
  16    This program is distributed in the hope that it will be useful,
  17    but WITHOUT ANY WARRANTY; without even the implied warranty of
  18    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19    GNU General Public License for more details.
  20
  21    You should have received a copy of the GNU General Public License
  22    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
  23
  24 #if !defined (TARGET_H)
  25 #define TARGET_H
  26
  27 struct objfile;
  28 struct ui_file;
  29 struct mem_attrib;
  30 struct target_ops;
  31 struct bp_target_info;
  32 struct regcache;
  33
  34 /* This include file defines the interface between the main part
  35    of the debugger, and the part which is target-specific, or
  36    specific to the communications interface between us and the
  37    target.
  38
  39    A TARGET is an interface between the debugger and a particular
  40    kind of file or process.  Targets can be STACKED in STRATA,
  41    so that more than one target can potentially respond to a request.
  42    In particular, memory accesses will walk down the stack of targets
  43    until they find a target that is interested in handling that particular
  44    address.  STRATA are artificial boundaries on the stack, within
  45    which particular kinds of targets live.  Strata exist so that
  46    people don't get confused by pushing e.g. a process target and then
  47    a file target, and wondering why they can't see the current values
  48    of variables any more (the file target is handling them and they
  49    never get to the process target).  So when you push a file target,
  50    it goes into the file stratum, which is always below the process
  51    stratum.  */
  52
  53 #include "bfd.h"
  54 #include "symtab.h"
  55 #include "dcache.h"
  56 #include "memattr.h"
  57 #include "vec.h"
  58
  59 enum strata
  60   {
  61     dummy_stratum,              /* The lowest of the low */
  62     file_stratum,               /* Executable files, etc */
  63     core_stratum,               /* Core dump files */
  64     process_stratum,            /* Executing processes */
  65     thread_stratum              /* Executing threads */
  66   };
  67
  68 enum thread_control_capabilities
  69   {
  70     tc_none = 0,                /* Default: can't control thread execution.  */
  71     tc_schedlock = 1,           /* Can lock the thread scheduler.  */
  72   };
  73
  74 /* Stuff for target_wait.  */
  75
  76 /* Generally, what has the program done?  */
  77 enum target_waitkind
  78   {
  79     /* The program has exited.  The exit status is in value.integer.  */
  80     TARGET_WAITKIND_EXITED,
  81
  82     /* The program has stopped with a signal.  Which signal is in
  83        value.sig.  */
  84     TARGET_WAITKIND_STOPPED,
  85
  86     /* The program has terminated with a signal.  Which signal is in
  87        value.sig.  */
  88     TARGET_WAITKIND_SIGNALLED,
  89
  90     /* The program is letting us know that it dynamically loaded something
  91        (e.g. it called load(2) on AIX).  */
  92     TARGET_WAITKIND_LOADED,
  93
  94     /* The program has forked.  A "related" process' PTID is in
  95        value.related_pid.  I.e., if the child forks, value.related_pid
  96        is the parent's ID.  */
  97
  98     TARGET_WAITKIND_FORKED,
  99
 100     /* The program has vforked.  A "related" process's PTID is in
 101        value.related_pid.  */
 102
 103     TARGET_WAITKIND_VFORKED,
 104
 105     /* The program has exec'ed a new executable file.  The new file's
 106        pathname is pointed to by value.execd_pathname.  */
 107
 108     TARGET_WAITKIND_EXECD,
 109
 110     /* The program has entered or returned from a system call.  On
 111        HP-UX, this is used in the hardware watchpoint implementation.
 112        The syscall's unique integer ID number is in value.syscall_id */
 113
 114     TARGET_WAITKIND_SYSCALL_ENTRY,
 115     TARGET_WAITKIND_SYSCALL_RETURN,
 116
 117     /* Nothing happened, but we stopped anyway.  This perhaps should be handled
 118        within target_wait, but I'm not sure target_wait should be resuming the
 119        inferior.  */
 120     TARGET_WAITKIND_SPURIOUS,
 121
 122     /* An event has occured, but we should wait again.
 123        Remote_async_wait() returns this when there is an event
 124        on the inferior, but the rest of the world is not interested in
 125        it. The inferior has not stopped, but has just sent some output
 126        to the console, for instance. In this case, we want to go back
 127        to the event loop and wait there for another event from the
 128        inferior, rather than being stuck in the remote_async_wait()
 129        function. This way the event loop is responsive to other events,
 130        like for instance the user typing.  */
 131     TARGET_WAITKIND_IGNORE,
 132
 133     /* The target has run out of history information,
 134        and cannot run backward any further.  */
 135     TARGET_WAITKIND_NO_HISTORY
 136   };
 137
 138 struct target_waitstatus
 139   {
 140     enum target_waitkind kind;
 141
 142     /* Forked child pid, execd pathname, exit status or signal number.  */
 143     union
 144       {
 145         int integer;
 146         enum target_signal sig;
 147         ptid_t related_pid;
 148         char *execd_pathname;
 149         int syscall_id;
 150       }
 151     value;
 152   };
 153
 154 /* Possible types of events that the inferior handler will have to
 155    deal with.  */
 156 enum inferior_event_type
 157   {
 158     /* There is a request to quit the inferior, abandon it.  */
 159     INF_QUIT_REQ,
 160     /* Process a normal inferior event which will result in target_wait
 161        being called.  */
 162     INF_REG_EVENT,
 163     /* Deal with an error on the inferior.  */
 164     INF_ERROR,
 165     /* We are called because a timer went off.  */
 166     INF_TIMER,
 167     /* We are called to do stuff after the inferior stops.  */
 168     INF_EXEC_COMPLETE,
 169     /* We are called to do some stuff after the inferior stops, but we
 170        are expected to reenter the proceed() and
 171        handle_inferior_event() functions. This is used only in case of
 172        'step n' like commands.  */
 173     INF_EXEC_CONTINUE
 174   };
 175
 176 /* Return the string for a signal.  */
 177 extern char *target_signal_to_string (enum target_signal);
 178
 179 /* Return the name (SIGHUP, etc.) for a signal.  */
 180 extern char *target_signal_to_name (enum target_signal);
 181
 182 /* Given a name (SIGHUP, etc.), return its signal.  */
 183 enum target_signal target_signal_from_name (char *);
 184 \f
 185 /* Target objects which can be transfered using target_read,
 186    target_write, et cetera.  */
 187
 188 enum target_object
 189 {
 190   /* AVR target specific transfer.  See "avr-tdep.c" and "remote.c".  */
 191   TARGET_OBJECT_AVR,
 192   /* SPU target specific transfer.  See "spu-tdep.c".  */
 193   TARGET_OBJECT_SPU,
 194   /* Transfer up-to LEN bytes of memory starting at OFFSET.  */
 195   TARGET_OBJECT_MEMORY,
 196   /* Memory, avoiding GDB's data cache and trusting the executable.
 197      Target implementations of to_xfer_partial never need to handle
 198      this object, and most callers should not use it.  */
 199   TARGET_OBJECT_RAW_MEMORY,
 200   /* Kernel Unwind Table.  See "ia64-tdep.c".  */
 201   TARGET_OBJECT_UNWIND_TABLE,
 202   /* Transfer auxilliary vector.  */
 203   TARGET_OBJECT_AUXV,
 204   /* StackGhost cookie.  See "sparc-tdep.c".  */
 205   TARGET_OBJECT_WCOOKIE,
 206   /* Target memory map in XML format.  */
 207   TARGET_OBJECT_MEMORY_MAP,
 208   /* Flash memory.  This object can be used to write contents to
 209      a previously erased flash memory.  Using it without erasing
 210      flash can have unexpected results.  Addresses are physical
 211      address on target, and not relative to flash start.  */
 212   TARGET_OBJECT_FLASH,
 213   /* Available target-specific features, e.g. registers and coprocessors.
 214      See "target-descriptions.c".  ANNEX should never be empty.  */
 215   TARGET_OBJECT_AVAILABLE_FEATURES,
 216   /* Currently loaded libraries, in XML format.  */
 217   TARGET_OBJECT_LIBRARIES
 218   /* Possible future objects: TARGET_OBJECT_FILE, TARGET_OBJECT_PROC, ... */
 219 };
 220
 221 /* Request that OPS transfer up to LEN 8-bit bytes of the target's
 222    OBJECT.  The OFFSET, for a seekable object, specifies the
 223    starting point.  The ANNEX can be used to provide additional
 224    data-specific information to the target.
 225
 226    Return the number of bytes actually transfered, or -1 if the
 227    transfer is not supported or otherwise fails.  Return of a positive
 228    value less than LEN indicates that no further transfer is possible.
 229    Unlike the raw to_xfer_partial interface, callers of these
 230    functions do not need to retry partial transfers.  */
 231
 232 extern LONGEST target_read (struct target_ops *ops,
 233                             enum target_object object,
 234                             const char *annex, gdb_byte *buf,
 235                             ULONGEST offset, LONGEST len);
 236
 237 extern LONGEST target_read_until_error (struct target_ops *ops,
 238                                         enum target_object object,
 239                                         const char *annex, gdb_byte *buf,
 240                                         ULONGEST offset, LONGEST len);
 241
 242 extern LONGEST target_write (struct target_ops *ops,
 243                              enum target_object object,
 244                              const char *annex, const gdb_byte *buf,
 245                              ULONGEST offset, LONGEST len);
 246
 247 /* Similar to target_write, except that it also calls PROGRESS with
 248    the number of bytes written and the opaque BATON after every
 249    successful partial write (and before the first write).  This is
 250    useful for progress reporting and user interaction while writing
 251    data.  To abort the transfer, the progress callback can throw an
 252    exception.  */
 253
 254 LONGEST target_write_with_progress (struct target_ops *ops,
 255                                     enum target_object object,
 256                                     const char *annex, const gdb_byte *buf,
 257                                     ULONGEST offset, LONGEST len,
 258                                     void (*progress) (ULONGEST, void *),
 259                                     void *baton);
 260
 261 /* Wrapper to perform a full read of unknown size.  OBJECT/ANNEX will
 262    be read using OPS.  The return value will be -1 if the transfer
 263    fails or is not supported; 0 if the object is empty; or the length
 264    of the object otherwise.  If a positive value is returned, a
 265    sufficiently large buffer will be allocated using xmalloc and
 266    returned in *BUF_P containing the contents of the object.
 267
 268    This method should be used for objects sufficiently small to store
 269    in a single xmalloc'd buffer, when no fixed bound on the object's
 270    size is known in advance.  Don't try to read TARGET_OBJECT_MEMORY
 271    through this function.  */
 272
 273 extern LONGEST target_read_alloc (struct target_ops *ops,
 274                                   enum target_object object,
 275                                   const char *annex, gdb_byte **buf_p);
 276
 277 /* Read OBJECT/ANNEX using OPS.  The result is NUL-terminated and
 278    returned as a string, allocated using xmalloc.  If an error occurs
 279    or the transfer is unsupported, NULL is returned.  Empty objects
 280    are returned as allocated but empty strings.  A warning is issued
 281    if the result contains any embedded NUL bytes.  */
 282
 283 extern char *target_read_stralloc (struct target_ops *ops,
 284                                    enum target_object object,
 285                                    const char *annex);
 286
 287 /* Wrappers to target read/write that perform memory transfers.  They
 288    throw an error if the memory transfer fails.
 289
 290    NOTE: cagney/2003-10-23: The naming schema is lifted from
 291    "frame.h".  The parameter order is lifted from get_frame_memory,
 292    which in turn lifted it from read_memory.  */
 293
 294 extern void get_target_memory (struct target_ops *ops, CORE_ADDR addr,
 295                                gdb_byte *buf, LONGEST len);
 296 extern ULONGEST get_target_memory_unsigned (struct target_ops *ops,
 297                                             CORE_ADDR addr, int len);
 298 \f
 299
 300 /* If certain kinds of activity happen, target_wait should perform
 301    callbacks.  */
 302 /* Right now we just call (*TARGET_ACTIVITY_FUNCTION) if I/O is possible
 303    on TARGET_ACTIVITY_FD.  */
 304 extern int target_activity_fd;
 305 /* Returns zero to leave the inferior alone, one to interrupt it.  */
 306 extern int (*target_activity_function) (void);
 307 \f
 308 struct thread_info;             /* fwd decl for parameter list below: */
 309
 310 struct target_ops
 311   {
 312     struct target_ops *beneath; /* To the target under this one.  */
 313     char *to_shortname;         /* Name this target type */
 314     char *to_longname;          /* Name for printing */
 315     char *to_doc;               /* Documentation.  Does not include trailing
 316                                    newline, and starts with a one-line descrip-
 317                                    tion (probably similar to to_longname).  */
 318     /* Per-target scratch pad.  */
 319     void *to_data;
 320     /* The open routine takes the rest of the parameters from the
 321        command, and (if successful) pushes a new target onto the
 322        stack.  Targets should supply this routine, if only to provide
 323        an error message.  */
 324     void (*to_open) (char *, int);
 325     /* Old targets with a static target vector provide "to_close".
 326        New re-entrant targets provide "to_xclose" and that is expected
 327        to xfree everything (including the "struct target_ops").  */
 328     void (*to_xclose) (struct target_ops *targ, int quitting);
 329     void (*to_close) (int);
 330     void (*to_attach) (struct target_ops *ops, char *, int);
 331     void (*to_post_attach) (int);
 332     void (*to_detach) (struct target_ops *ops, char *, int);
 333     void (*to_disconnect) (struct target_ops *, char *, int);
 334     void (*to_resume) (ptid_t, int, enum target_signal);
 335     ptid_t (*to_wait) (ptid_t, struct target_waitstatus *);
 336     void (*to_fetch_registers) (struct regcache *, int);
 337     void (*to_store_registers) (struct regcache *, int);
 338     void (*to_prepare_to_store) (struct regcache *);
 339
 340     /* Transfer LEN bytes of memory between GDB address MYADDR and
 341        target address MEMADDR.  If WRITE, transfer them to the target, else
 342        transfer them from the target.  TARGET is the target from which we
 343        get this function.
 344
 345        Return value, N, is one of the following:
 346
 347        0 means that we can't handle this.  If errno has been set, it is the
 348        error which prevented us from doing it (FIXME: What about bfd_error?).
 349
 350        positive (call it N) means that we have transferred N bytes
 351        starting at MEMADDR.  We might be able to handle more bytes
 352        beyond this length, but no promises.
 353
 354        negative (call its absolute value N) means that we cannot
 355        transfer right at MEMADDR, but we could transfer at least
 356        something at MEMADDR + N.
 357
 358        NOTE: cagney/2004-10-01: This has been entirely superseeded by
 359        to_xfer_partial and inferior inheritance.  */
 360
 361     int (*deprecated_xfer_memory) (CORE_ADDR memaddr, gdb_byte *myaddr,
 362                                    int len, int write,
 363                                    struct mem_attrib *attrib,
 364                                    struct target_ops *target);
 365
 366     void (*to_files_info) (struct target_ops *);
 367     int (*to_insert_breakpoint) (struct bp_target_info *);
 368     int (*to_remove_breakpoint) (struct bp_target_info *);
 369     int (*to_can_use_hw_breakpoint) (int, int, int);
 370     int (*to_insert_hw_breakpoint) (struct bp_target_info *);
 371     int (*to_remove_hw_breakpoint) (struct bp_target_info *);
 372     int (*to_remove_watchpoint) (CORE_ADDR, int, int);
 373     int (*to_insert_watchpoint) (CORE_ADDR, int, int);
 374     int (*to_stopped_by_watchpoint) (void);
 375     int to_have_steppable_watchpoint;
 376     int to_have_continuable_watchpoint;
 377     int (*to_stopped_data_address) (struct target_ops *, CORE_ADDR *);
 378     int (*to_watchpoint_addr_within_range) (struct target_ops *,
 379                                             CORE_ADDR, CORE_ADDR, int);
 380     int (*to_region_ok_for_hw_watchpoint) (CORE_ADDR, int);
 381     void (*to_terminal_init) (void);
 382     void (*to_terminal_inferior) (void);
 383     void (*to_terminal_ours_for_output) (void);
 384     void (*to_terminal_ours) (void);
 385     void (*to_terminal_save_ours) (void);
 386     void (*to_terminal_info) (char *, int);
 387     void (*to_kill) (void);
 388     void (*to_load) (char *, int);
 389     int (*to_lookup_symbol) (char *, CORE_ADDR *);
 390     void (*to_create_inferior) (struct target_ops *,
 391                                 char *, char *, char **, int);
 392     void (*to_post_startup_inferior) (ptid_t);
 393     void (*to_acknowledge_created_inferior) (int);
 394     void (*to_insert_fork_catchpoint) (int);
 395     int (*to_remove_fork_catchpoint) (int);
 396     void (*to_insert_vfork_catchpoint) (int);
 397     int (*to_remove_vfork_catchpoint) (int);
 398     int (*to_follow_fork) (struct target_ops *, int);
 399     void (*to_insert_exec_catchpoint) (int);
 400     int (*to_remove_exec_catchpoint) (int);
 401     int (*to_has_exited) (int, int, int *);
 402     void (*to_mourn_inferior) (struct target_ops *);
 403     int (*to_can_run) (void);
 404     void (*to_notice_signals) (ptid_t ptid);
 405     int (*to_thread_alive) (ptid_t ptid);
 406     void (*to_find_new_threads) (void);
 407     char *(*to_pid_to_str) (ptid_t);
 408     char *(*to_extra_thread_info) (struct thread_info *);
 409     void (*to_stop) (ptid_t);
 410     void (*to_rcmd) (char *command, struct ui_file *output);
 411     char *(*to_pid_to_exec_file) (int pid);
 412     void (*to_log_command) (const char *);
 413     enum strata to_stratum;
 414     int to_has_all_memory;
 415     int to_has_memory;
 416     int to_has_stack;
 417     int to_has_registers;
 418     int to_has_execution;
 419     int to_has_thread_control;  /* control thread execution */
 420     int to_attach_no_wait;
 421     struct section_table
 422      *to_sections;
 423     struct section_table
 424      *to_sections_end;
 425     /* ASYNC target controls */
 426     int (*to_can_async_p) (void);
 427     int (*to_is_async_p) (void);
 428     void (*to_async) (void (*) (enum inferior_event_type, void *), void *);
 429     int (*to_async_mask) (int);
 430     int (*to_supports_non_stop) (void);
 431     int (*to_find_memory_regions) (int (*) (CORE_ADDR,
 432                                             unsigned long,
 433                                             int, int, int,
 434                                             void *),
 435                                    void *);
 436     char * (*to_make_corefile_notes) (bfd *, int *);
 437
 438     /* Return the thread-local address at OFFSET in the
 439        thread-local storage for the thread PTID and the shared library
 440        or executable file given by OBJFILE.  If that block of
 441        thread-local storage hasn't been allocated yet, this function
 442        may return an error.  */
 443     CORE_ADDR (*to_get_thread_local_address) (ptid_t ptid,
 444                                               CORE_ADDR load_module_addr,
 445                                               CORE_ADDR offset);
 446
 447     /* Request that OPS transfer up to LEN 8-bit bytes of the target's
 448        OBJECT.  The OFFSET, for a seekable object, specifies the
 449        starting point.  The ANNEX can be used to provide additional
 450        data-specific information to the target.
 451
 452        Return the number of bytes actually transfered, zero when no
 453        further transfer is possible, and -1 when the transfer is not
 454        supported.  Return of a positive value smaller than LEN does
 455        not indicate the end of the object, only the end of the
 456        transfer; higher level code should continue transferring if
 457        desired.  This is handled in target.c.
 458
 459        The interface does not support a "retry" mechanism.  Instead it
 460        assumes that at least one byte will be transfered on each
 461        successful call.
 462
 463        NOTE: cagney/2003-10-17: The current interface can lead to
 464        fragmented transfers.  Lower target levels should not implement
 465        hacks, such as enlarging the transfer, in an attempt to
 466        compensate for this.  Instead, the target stack should be
 467        extended so that it implements supply/collect methods and a
 468        look-aside object cache.  With that available, the lowest
 469        target can safely and freely "push" data up the stack.
 470
 471        See target_read and target_write for more information.  One,
 472        and only one, of readbuf or writebuf must be non-NULL.  */
 473
 474     LONGEST (*to_xfer_partial) (struct target_ops *ops,
 475                                 enum target_object object, const char *annex,
 476                                 gdb_byte *readbuf, const gdb_byte *writebuf,
 477                                 ULONGEST offset, LONGEST len);
 478
 479     /* Returns the memory map for the target.  A return value of NULL
 480        means that no memory map is available.  If a memory address
 481        does not fall within any returned regions, it's assumed to be
 482        RAM.  The returned memory regions should not overlap.
 483
 484        The order of regions does not matter; target_memory_map will
 485        sort regions by starting address. For that reason, this
 486        function should not be called directly except via
 487        target_memory_map.
 488
 489        This method should not cache data; if the memory map could
 490        change unexpectedly, it should be invalidated, and higher
 491        layers will re-fetch it.  */
 492     VEC(mem_region_s) *(*to_memory_map) (struct target_ops *);
 493
 494     /* Erases the region of flash memory starting at ADDRESS, of
 495        length LENGTH.
 496
 497        Precondition: both ADDRESS and ADDRESS+LENGTH should be aligned
 498        on flash block boundaries, as reported by 'to_memory_map'.  */
 499     void (*to_flash_erase) (struct target_ops *,
 500                            ULONGEST address, LONGEST length);
 501
 502     /* Finishes a flash memory write sequence.  After this operation
 503        all flash memory should be available for writing and the result
 504        of reading from areas written by 'to_flash_write' should be
 505        equal to what was written.  */
 506     void (*to_flash_done) (struct target_ops *);
 507
 508     /* Describe the architecture-specific features of this target.
 509        Returns the description found, or NULL if no description
 510        was available.  */
 511     const struct target_desc *(*to_read_description) (struct target_ops *ops);
 512
 513     /* Build the PTID of the thread on which a given task is running,
 514        based on LWP and THREAD.  These values are extracted from the
 515        task Private_Data section of the Ada Task Control Block, and
 516        their interpretation depends on the target.  */
 517     ptid_t (*to_get_ada_task_ptid) (long lwp, long thread);
 518
 519     /* Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
 520        Return 0 if *READPTR is already at the end of the buffer.
 521        Return -1 if there is insufficient buffer for a whole entry.
 522        Return 1 if an entry was read into *TYPEP and *VALP.  */
 523     int (*to_auxv_parse) (struct target_ops *ops, gdb_byte **readptr,
 524                          gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp);
 525
 526     /* Search SEARCH_SPACE_LEN bytes beginning at START_ADDR for the
 527        sequence of bytes in PATTERN with length PATTERN_LEN.
 528
 529        The result is 1 if found, 0 if not found, and -1 if there was an error
 530        requiring halting of the search (e.g. memory read error).
 531        If the pattern is found the address is recorded in FOUND_ADDRP.  */
 532     int (*to_search_memory) (struct target_ops *ops,
 533                              CORE_ADDR start_addr, ULONGEST search_space_len,
 534                              const gdb_byte *pattern, ULONGEST pattern_len,
 535                              CORE_ADDR *found_addrp);
 536
 537     /* Can target execute in reverse?  */
 538     int (*to_can_execute_reverse) ();
 539
 540     /* Does this target support debugging multiple processes
 541        simultaneously?  */
 542     int (*to_supports_multi_process) (void);
 543
 544     int to_magic;
 545     /* Need sub-structure for target machine related rather than comm related?
 546      */
 547   };
 548
 549 /* Magic number for checking ops size.  If a struct doesn't end with this
 550    number, somebody changed the declaration but didn't change all the
 551    places that initialize one.  */
 552
 553 #define OPS_MAGIC       3840
 554
 555 /* The ops structure for our "current" target process.  This should
 556    never be NULL.  If there is no target, it points to the dummy_target.  */
 557
 558 extern struct target_ops current_target;
 559
 560 /* Define easy words for doing these operations on our current target.  */
 561
 562 #define target_shortname        (current_target.to_shortname)
 563 #define target_longname         (current_target.to_longname)
 564
 565 /* Does whatever cleanup is required for a target that we are no
 566    longer going to be calling.  QUITTING indicates that GDB is exiting
 567    and should not get hung on an error (otherwise it is important to
 568    perform clean termination, even if it takes a while).  This routine
 569    is automatically always called when popping the target off the
 570    target stack (to_beneath is undefined).  Closing file descriptors
 571    and freeing all memory allocated memory are typical things it
 572    should do.  */
 573
 574 void target_close (struct target_ops *targ, int quitting);
 575
 576 /* Attaches to a process on the target side.  Arguments are as passed
 577    to the `attach' command by the user.  This routine can be called
 578    when the target is not on the target-stack, if the target_can_run
 579    routine returns 1; in that case, it must push itself onto the stack.
 580    Upon exit, the target should be ready for normal operations, and
 581    should be ready to deliver the status of the process immediately
 582    (without waiting) to an upcoming target_wait call.  */
 583
 584 void target_attach (char *, int);
 585
 586 /* Some targets don't generate traps when attaching to the inferior,
 587    or their target_attach implementation takes care of the waiting.
 588    These targets must set to_attach_no_wait.  */
 589
 590 #define target_attach_no_wait \
 591      (current_target.to_attach_no_wait)
 592
 593 /* The target_attach operation places a process under debugger control,
 594    and stops the process.
 595
 596    This operation provides a target-specific hook that allows the
 597    necessary bookkeeping to be performed after an attach completes.  */
 598 #define target_post_attach(pid) \
 599      (*current_target.to_post_attach) (pid)
 600
 601 /* Takes a program previously attached to and detaches it.
 602    The program may resume execution (some targets do, some don't) and will
 603    no longer stop on signals, etc.  We better not have left any breakpoints
 604    in the program or it'll die when it hits one.  ARGS is arguments
 605    typed by the user (e.g. a signal to send the process).  FROM_TTY
 606    says whether to be verbose or not.  */
 607
 608 extern void target_detach (char *, int);
 609
 610 /* Disconnect from the current target without resuming it (leaving it
 611    waiting for a debugger).  */
 612
 613 extern void target_disconnect (char *, int);
 614
 615 /* Resume execution of the target process PTID.  STEP says whether to
 616    single-step or to run free; SIGGNAL is the signal to be given to
 617    the target, or TARGET_SIGNAL_0 for no signal.  The caller may not
 618    pass TARGET_SIGNAL_DEFAULT.  */
 619
 620 extern void target_resume (ptid_t ptid, int step, enum target_signal signal);
 621
 622 /* Wait for process pid to do something.  PTID = -1 to wait for any
 623    pid to do something.  Return pid of child, or -1 in case of error;
 624    store status through argument pointer STATUS.  Note that it is
 625    _NOT_ OK to throw_exception() out of target_wait() without popping
 626    the debugging target from the stack; GDB isn't prepared to get back
 627    to the prompt with a debugging target but without the frame cache,
 628    stop_pc, etc., set up.  */
 629
 630 #define target_wait(ptid, status)               \
 631      (*current_target.to_wait) (ptid, status)
 632
 633 /* Fetch at least register REGNO, or all regs if regno == -1.  No result.  */
 634
 635 #define target_fetch_registers(regcache, regno) \
 636      (*current_target.to_fetch_registers) (regcache, regno)
 637
 638 /* Store at least register REGNO, or all regs if REGNO == -1.
 639    It can store as many registers as it wants to, so target_prepare_to_store
 640    must have been previously called.  Calls error() if there are problems.  */
 641
 642 #define target_store_registers(regcache, regs)  \
 643      (*current_target.to_store_registers) (regcache, regs)
 644
 645 /* Get ready to modify the registers array.  On machines which store
 646    individual registers, this doesn't need to do anything.  On machines
 647    which store all the registers in one fell swoop, this makes sure
 648    that REGISTERS contains all the registers from the program being
 649    debugged.  */
 650
 651 #define target_prepare_to_store(regcache)       \
 652      (*current_target.to_prepare_to_store) (regcache)
 653
 654 /* Returns true if this target can debug multiple processes
 655    simultaneously.  */
 656
 657 #define target_supports_multi_process() \
 658      (*current_target.to_supports_multi_process) ()
 659
 660 extern DCACHE *target_dcache;
 661
 662 extern int target_read_string (CORE_ADDR, char **, int, int *);
 663
 664 extern int target_read_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len);
 665
 666 extern int target_write_memory (CORE_ADDR memaddr, const gdb_byte *myaddr,
 667                                 int len);
 668
 669 extern int xfer_memory (CORE_ADDR, gdb_byte *, int, int,
 670                         struct mem_attrib *, struct target_ops *);
 671
 672 /* Fetches the target's memory map.  If one is found it is sorted
 673    and returned, after some consistency checking.  Otherwise, NULL
 674    is returned.  */
 675 VEC(mem_region_s) *target_memory_map (void);
 676
 677 /* Erase the specified flash region.  */
 678 void target_flash_erase (ULONGEST address, LONGEST length);
 679
 680 /* Finish a sequence of flash operations.  */
 681 void target_flash_done (void);
 682
 683 /* Describes a request for a memory write operation.  */
 684 struct memory_write_request
 685   {
 686     /* Begining address that must be written. */
 687     ULONGEST begin;
 688     /* Past-the-end address. */
 689     ULONGEST end;
 690     /* The data to write. */
 691     gdb_byte *data;
 692     /* A callback baton for progress reporting for this request.  */
 693     void *baton;
 694   };
 695 typedef struct memory_write_request memory_write_request_s;
 696 DEF_VEC_O(memory_write_request_s);
 697
 698 /* Enumeration specifying different flash preservation behaviour.  */
 699 enum flash_preserve_mode
 700   {
 701     flash_preserve,
 702     flash_discard
 703   };
 704
 705 /* Write several memory blocks at once.  This version can be more
 706    efficient than making several calls to target_write_memory, in
 707    particular because it can optimize accesses to flash memory.
 708
 709    Moreover, this is currently the only memory access function in gdb
 710    that supports writing to flash memory, and it should be used for
 711    all cases where access to flash memory is desirable.
 712
 713    REQUESTS is the vector (see vec.h) of memory_write_request.
 714    PRESERVE_FLASH_P indicates what to do with blocks which must be
 715      erased, but not completely rewritten.
 716    PROGRESS_CB is a function that will be periodically called to provide
 717      feedback to user.  It will be called with the baton corresponding
 718      to the request currently being written.  It may also be called
 719      with a NULL baton, when preserved flash sectors are being rewritten.
 720
 721    The function returns 0 on success, and error otherwise.  */
 722 int target_write_memory_blocks (VEC(memory_write_request_s) *requests,
 723                                 enum flash_preserve_mode preserve_flash_p,
 724                                 void (*progress_cb) (ULONGEST, void *));
 725
 726 /* From infrun.c.  */
 727
 728 extern int inferior_has_forked (ptid_t pid, ptid_t *child_pid);
 729
 730 extern int inferior_has_vforked (ptid_t pid, ptid_t *child_pid);
 731
 732 extern int inferior_has_execd (ptid_t pid, char **execd_pathname);
 733
 734 /* From exec.c */
 735
 736 extern void print_section_info (struct target_ops *, bfd *);
 737
 738 /* Print a line about the current target.  */
 739
 740 #define target_files_info()     \
 741      (*current_target.to_files_info) (&current_target)
 742
 743 /* Insert a breakpoint at address BP_TGT->placed_address in the target
 744    machine.  Result is 0 for success, or an errno value.  */
 745
 746 #define target_insert_breakpoint(bp_tgt)        \
 747      (*current_target.to_insert_breakpoint) (bp_tgt)
 748
 749 /* Remove a breakpoint at address BP_TGT->placed_address in the target
 750    machine.  Result is 0 for success, or an errno value.  */
 751
 752 #define target_remove_breakpoint(bp_tgt)        \
 753      (*current_target.to_remove_breakpoint) (bp_tgt)
 754
 755 /* Initialize the terminal settings we record for the inferior,
 756    before we actually run the inferior.  */
 757
 758 #define target_terminal_init() \
 759      (*current_target.to_terminal_init) ()
 760
 761 /* Put the inferior's terminal settings into effect.
 762    This is preparation for starting or resuming the inferior.  */
 763
 764 #define target_terminal_inferior() \
 765      (*current_target.to_terminal_inferior) ()
 766
 767 /* Put some of our terminal settings into effect,
 768    enough to get proper results from our output,
 769    but do not change into or out of RAW mode
 770    so that no input is discarded.
 771
 772    After doing this, either terminal_ours or terminal_inferior
 773    should be called to get back to a normal state of affairs.  */
 774
 775 #define target_terminal_ours_for_output() \
 776      (*current_target.to_terminal_ours_for_output) ()
 777
 778 /* Put our terminal settings into effect.
 779    First record the inferior's terminal settings
 780    so they can be restored properly later.  */
 781
 782 #define target_terminal_ours() \
 783      (*current_target.to_terminal_ours) ()
 784
 785 /* Save our terminal settings.
 786    This is called from TUI after entering or leaving the curses
 787    mode.  Since curses modifies our terminal this call is here
 788    to take this change into account.  */
 789
 790 #define target_terminal_save_ours() \
 791      (*current_target.to_terminal_save_ours) ()
 792
 793 /* Print useful information about our terminal status, if such a thing
 794    exists.  */
 795
 796 #define target_terminal_info(arg, from_tty) \
 797      (*current_target.to_terminal_info) (arg, from_tty)
 798
 799 /* Kill the inferior process.   Make it go away.  */
 800
 801 #define target_kill() \
 802      (*current_target.to_kill) ()
 803
 804 /* Load an executable file into the target process.  This is expected
 805    to not only bring new code into the target process, but also to
 806    update GDB's symbol tables to match.
 807
 808    ARG contains command-line arguments, to be broken down with
 809    buildargv ().  The first non-switch argument is the filename to
 810    load, FILE; the second is a number (as parsed by strtoul (..., ...,
 811    0)), which is an offset to apply to the load addresses of FILE's
 812    sections.  The target may define switches, or other non-switch
 813    arguments, as it pleases.  */
 814
 815 extern void target_load (char *arg, int from_tty);
 816
 817 /* Look up a symbol in the target's symbol table.  NAME is the symbol
 818    name.  ADDRP is a CORE_ADDR * pointing to where the value of the
 819    symbol should be returned.  The result is 0 if successful, nonzero
 820    if the symbol does not exist in the target environment.  This
 821    function should not call error() if communication with the target
 822    is interrupted, since it is called from symbol reading, but should
 823    return nonzero, possibly doing a complain().  */
 824
 825 #define target_lookup_symbol(name, addrp) \
 826      (*current_target.to_lookup_symbol) (name, addrp)
 827
 828 /* Start an inferior process and set inferior_ptid to its pid.
 829    EXEC_FILE is the file to run.
 830    ALLARGS is a string containing the arguments to the program.
 831    ENV is the environment vector to pass.  Errors reported with error().
 832    On VxWorks and various standalone systems, we ignore exec_file.  */
 833
 834 void target_create_inferior (char *exec_file, char *args,
 835                              char **env, int from_tty);
 836
 837 /* Some targets (such as ttrace-based HPUX) don't allow us to request
 838    notification of inferior events such as fork and vork immediately
 839    after the inferior is created.  (This because of how gdb gets an
 840    inferior created via invoking a shell to do it.  In such a scenario,
 841    if the shell init file has commands in it, the shell will fork and
 842    exec for each of those commands, and we will see each such fork
 843    event.  Very bad.)
 844
 845    Such targets will supply an appropriate definition for this function.  */
 846
 847 #define target_post_startup_inferior(ptid) \
 848      (*current_target.to_post_startup_inferior) (ptid)
 849
 850 /* On some targets, the sequence of starting up an inferior requires
 851    some synchronization between gdb and the new inferior process, PID.  */
 852
 853 #define target_acknowledge_created_inferior(pid) \
 854      (*current_target.to_acknowledge_created_inferior) (pid)
 855
 856 /* On some targets, we can catch an inferior fork or vfork event when
 857    it occurs.  These functions insert/remove an already-created
 858    catchpoint for such events.  */
 859
 860 #define target_insert_fork_catchpoint(pid) \
 861      (*current_target.to_insert_fork_catchpoint) (pid)
 862
 863 #define target_remove_fork_catchpoint(pid) \
 864      (*current_target.to_remove_fork_catchpoint) (pid)
 865
 866 #define target_insert_vfork_catchpoint(pid) \
 867      (*current_target.to_insert_vfork_catchpoint) (pid)
 868
 869 #define target_remove_vfork_catchpoint(pid) \
 870      (*current_target.to_remove_vfork_catchpoint) (pid)
 871
 872 /* If the inferior forks or vforks, this function will be called at
 873    the next resume in order to perform any bookkeeping and fiddling
 874    necessary to continue debugging either the parent or child, as
 875    requested, and releasing the other.  Information about the fork
 876    or vfork event is available via get_last_target_status ().
 877    This function returns 1 if the inferior should not be resumed
 878    (i.e. there is another event pending).  */
 879
 880 int target_follow_fork (int follow_child);
 881
 882 /* On some targets, we can catch an inferior exec event when it
 883    occurs.  These functions insert/remove an already-created
 884    catchpoint for such events.  */
 885
 886 #define target_insert_exec_catchpoint(pid) \
 887      (*current_target.to_insert_exec_catchpoint) (pid)
 888
 889 #define target_remove_exec_catchpoint(pid) \
 890      (*current_target.to_remove_exec_catchpoint) (pid)
 891
 892 /* Returns TRUE if PID has exited.  And, also sets EXIT_STATUS to the
 893    exit code of PID, if any.  */
 894
 895 #define target_has_exited(pid,wait_status,exit_status) \
 896      (*current_target.to_has_exited) (pid,wait_status,exit_status)
 897
 898 /* The debugger has completed a blocking wait() call.  There is now
 899    some process event that must be processed.  This function should
 900    be defined by those targets that require the debugger to perform
 901    cleanup or internal state changes in response to the process event.  */
 902
 903 /* The inferior process has died.  Do what is right.  */
 904
 905 void target_mourn_inferior (void);
 906
 907 /* Does target have enough data to do a run or attach command? */
 908
 909 #define target_can_run(t) \
 910      ((t)->to_can_run) ()
 911
 912 /* post process changes to signal handling in the inferior.  */
 913
 914 #define target_notice_signals(ptid) \
 915      (*current_target.to_notice_signals) (ptid)
 916
 917 /* Check to see if a thread is still alive.  */
 918
 919 #define target_thread_alive(ptid) \
 920      (*current_target.to_thread_alive) (ptid)
 921
 922 /* Query for new threads and add them to the thread list.  */
 923
 924 #define target_find_new_threads() \
 925      (*current_target.to_find_new_threads) ()
 926
 927 /* Make target stop in a continuable fashion.  (For instance, under
 928    Unix, this should act like SIGSTOP).  This function is normally
 929    used by GUIs to implement a stop button.  */
 930
 931 #define target_stop(ptid) (*current_target.to_stop) (ptid)
 932
 933 /* Send the specified COMMAND to the target's monitor
 934    (shell,interpreter) for execution.  The result of the query is
 935    placed in OUTBUF.  */
 936
 937 #define target_rcmd(command, outbuf) \
 938      (*current_target.to_rcmd) (command, outbuf)
 939
 940
 941 /* Does the target include all of memory, or only part of it?  This
 942    determines whether we look up the target chain for other parts of
 943    memory if this target can't satisfy a request.  */
 944
 945 #define target_has_all_memory   \
 946      (current_target.to_has_all_memory)
 947
 948 /* Does the target include memory?  (Dummy targets don't.)  */
 949
 950 #define target_has_memory       \
 951      (current_target.to_has_memory)
 952
 953 /* Does the target have a stack?  (Exec files don't, VxWorks doesn't, until
 954    we start a process.)  */
 955
 956 #define target_has_stack        \
 957      (current_target.to_has_stack)
 958
 959 /* Does the target have registers?  (Exec files don't.)  */
 960
 961 #define target_has_registers    \
 962      (current_target.to_has_registers)
 963
 964 /* Does the target have execution?  Can we make it jump (through
 965    hoops), or pop its stack a few times?  This means that the current
 966    target is currently executing; for some targets, that's the same as
 967    whether or not the target is capable of execution, but there are
 968    also targets which can be current while not executing.  In that
 969    case this will become true after target_create_inferior or
 970    target_attach.  */
 971
 972 #define target_has_execution    \
 973      (current_target.to_has_execution)
 974
 975 /* Can the target support the debugger control of thread execution?
 976    Can it lock the thread scheduler?  */
 977
 978 #define target_can_lock_scheduler \
 979      (current_target.to_has_thread_control & tc_schedlock)
 980
 981 /* Should the target enable async mode if it is supported?  Temporary
 982    cludge until async mode is a strict superset of sync mode.  */
 983 extern int target_async_permitted;
 984
 985 /* Can the target support asynchronous execution? */
 986 #define target_can_async_p() (current_target.to_can_async_p ())
 987
 988 /* Is the target in asynchronous execution mode? */
 989 #define target_is_async_p() (current_target.to_is_async_p ())
 990
 991 int target_supports_non_stop (void);
 992
 993 /* Put the target in async mode with the specified callback function. */
 994 #define target_async(CALLBACK,CONTEXT) \
 995      (current_target.to_async ((CALLBACK), (CONTEXT)))
 996
 997 /* This is to be used ONLY within call_function_by_hand(). It provides
 998    a workaround, to have inferior function calls done in sychronous
 999    mode, even though the target is asynchronous. After
1000    target_async_mask(0) is called, calls to target_can_async_p() will
1001    return FALSE , so that target_resume() will not try to start the
1002    target asynchronously. After the inferior stops, we IMMEDIATELY
1003    restore the previous nature of the target, by calling
1004    target_async_mask(1). After that, target_can_async_p() will return
1005    TRUE. ANY OTHER USE OF THIS FEATURE IS DEPRECATED.
1006
1007    FIXME ezannoni 1999-12-13: we won't need this once we move
1008    the turning async on and off to the single execution commands,
1009    from where it is done currently, in remote_resume().  */
1010
1011 #define target_async_mask(MASK) \
1012   (current_target.to_async_mask (MASK))
1013
1014 /* Converts a process id to a string.  Usually, the string just contains
1015    `process xyz', but on some systems it may contain
1016    `process xyz thread abc'.  */
1017
1018 #undef target_pid_to_str
1019 #define target_pid_to_str(PID) current_target.to_pid_to_str (PID)
1020
1021 #ifndef target_tid_to_str
1022 #define target_tid_to_str(PID) \
1023      target_pid_to_str (PID)
1024 extern char *normal_pid_to_str (ptid_t ptid);
1025 #endif
1026
1027 /* Return a short string describing extra information about PID,
1028    e.g. "sleeping", "runnable", "running on LWP 3".  Null return value
1029    is okay.  */
1030
1031 #define target_extra_thread_info(TP) \
1032      (current_target.to_extra_thread_info (TP))
1033
1034 /* Attempts to find the pathname of the executable file
1035    that was run to create a specified process.
1036
1037    The process PID must be stopped when this operation is used.
1038
1039    If the executable file cannot be determined, NULL is returned.
1040
1041    Else, a pointer to a character string containing the pathname
1042    is returned.  This string should be copied into a buffer by
1043    the client if the string will not be immediately used, or if
1044    it must persist.  */
1045
1046 #define target_pid_to_exec_file(pid) \
1047      (current_target.to_pid_to_exec_file) (pid)
1048
1049 /*
1050  * Iterator function for target memory regions.
1051  * Calls a callback function once for each memory region 'mapped'
1052  * in the child process.  Defined as a simple macro rather than
1053  * as a function macro so that it can be tested for nullity.
1054  */
1055
1056 #define target_find_memory_regions(FUNC, DATA) \
1057      (current_target.to_find_memory_regions) (FUNC, DATA)
1058
1059 /*
1060  * Compose corefile .note section.
1061  */
1062
1063 #define target_make_corefile_notes(BFD, SIZE_P) \
1064      (current_target.to_make_corefile_notes) (BFD, SIZE_P)
1065
1066 /* Thread-local values.  */
1067 #define target_get_thread_local_address \
1068     (current_target.to_get_thread_local_address)
1069 #define target_get_thread_local_address_p() \
1070     (target_get_thread_local_address != NULL)
1071
1072
1073 /* Hardware watchpoint interfaces.  */
1074
1075 /* Returns non-zero if we were stopped by a hardware watchpoint (memory read or
1076    write).  */
1077
1078 #ifndef STOPPED_BY_WATCHPOINT
1079 #define STOPPED_BY_WATCHPOINT(w) \
1080    (*current_target.to_stopped_by_watchpoint) ()
1081 #endif
1082
1083 /* Non-zero if we have steppable watchpoints  */
1084
1085 #ifndef HAVE_STEPPABLE_WATCHPOINT
1086 #define HAVE_STEPPABLE_WATCHPOINT \
1087    (current_target.to_have_steppable_watchpoint)
1088 #endif
1089
1090 /* Non-zero if we have continuable watchpoints  */
1091
1092 #ifndef HAVE_CONTINUABLE_WATCHPOINT
1093 #define HAVE_CONTINUABLE_WATCHPOINT \
1094    (current_target.to_have_continuable_watchpoint)
1095 #endif
1096
1097 /* Provide defaults for hardware watchpoint functions.  */
1098
1099 /* If the *_hw_beakpoint functions have not been defined
1100    elsewhere use the definitions in the target vector.  */
1101
1102 /* Returns non-zero if we can set a hardware watchpoint of type TYPE.  TYPE is
1103    one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or
1104    bp_hardware_breakpoint.  CNT is the number of such watchpoints used so far
1105    (including this one?).  OTHERTYPE is who knows what...  */
1106
1107 #ifndef TARGET_CAN_USE_HARDWARE_WATCHPOINT
1108 #define TARGET_CAN_USE_HARDWARE_WATCHPOINT(TYPE,CNT,OTHERTYPE) \
1109  (*current_target.to_can_use_hw_breakpoint) (TYPE, CNT, OTHERTYPE);
1110 #endif
1111
1112 #ifndef TARGET_REGION_OK_FOR_HW_WATCHPOINT
1113 #define TARGET_REGION_OK_FOR_HW_WATCHPOINT(addr, len) \
1114     (*current_target.to_region_ok_for_hw_watchpoint) (addr, len)
1115 #endif
1116
1117
1118 /* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes.  TYPE is 0
1119    for write, 1 for read, and 2 for read/write accesses.  Returns 0 for
1120    success, non-zero for failure.  */
1121
1122 #ifndef target_insert_watchpoint
1123 #define target_insert_watchpoint(addr, len, type)       \
1124      (*current_target.to_insert_watchpoint) (addr, len, type)
1125
1126 #define target_remove_watchpoint(addr, len, type)       \
1127      (*current_target.to_remove_watchpoint) (addr, len, type)
1128 #endif
1129
1130 #ifndef target_insert_hw_breakpoint
1131 #define target_insert_hw_breakpoint(bp_tgt) \
1132      (*current_target.to_insert_hw_breakpoint) (bp_tgt)
1133
1134 #define target_remove_hw_breakpoint(bp_tgt) \
1135      (*current_target.to_remove_hw_breakpoint) (bp_tgt)
1136 #endif
1137
1138 extern int target_stopped_data_address_p (struct target_ops *);
1139
1140 #ifndef target_stopped_data_address
1141 #define target_stopped_data_address(target, x) \
1142     (*target.to_stopped_data_address) (target, x)
1143 #else
1144 /* Horrible hack to get around existing macros :-(.  */
1145 #define target_stopped_data_address_p(CURRENT_TARGET) (1)
1146 #endif
1147
1148 #define target_watchpoint_addr_within_range(target, addr, start, length) \
1149   (*target.to_watchpoint_addr_within_range) (target, addr, start, length)
1150
1151 /* Target can execute in reverse?  */
1152 #define target_can_execute_reverse \
1153      (current_target.to_can_execute_reverse ? \
1154       current_target.to_can_execute_reverse () : 0)
1155
1156 extern const struct target_desc *target_read_description (struct target_ops *);
1157
1158 #define target_get_ada_task_ptid(lwp, tid) \
1159      (*current_target.to_get_ada_task_ptid) (lwp,tid)
1160
1161 /* Utility implementation of searching memory.  */
1162 extern int simple_search_memory (struct target_ops* ops,
1163                                  CORE_ADDR start_addr,
1164                                  ULONGEST search_space_len,
1165                                  const gdb_byte *pattern,
1166                                  ULONGEST pattern_len,
1167                                  CORE_ADDR *found_addrp);
1168
1169 /* Main entry point for searching memory.  */
1170 extern int target_search_memory (CORE_ADDR start_addr,
1171                                  ULONGEST search_space_len,
1172                                  const gdb_byte *pattern,
1173                                  ULONGEST pattern_len,
1174                                  CORE_ADDR *found_addrp);
1175
1176 /* Command logging facility.  */
1177
1178 #define target_log_command(p)                                           \
1179   do                                                                    \
1180     if (current_target.to_log_command)                                  \
1181       (*current_target.to_log_command) (p);                             \
1182   while (0)
1183
1184 /* Routines for maintenance of the target structures...
1185
1186    add_target:   Add a target to the list of all possible targets.
1187
1188    push_target:  Make this target the top of the stack of currently used
1189    targets, within its particular stratum of the stack.  Result
1190    is 0 if now atop the stack, nonzero if not on top (maybe
1191    should warn user).
1192
1193    unpush_target: Remove this from the stack of currently used targets,
1194    no matter where it is on the list.  Returns 0 if no
1195    change, 1 if removed from stack.
1196
1197    pop_target:   Remove the top thing on the stack of current targets.  */
1198
1199 extern void add_target (struct target_ops *);
1200
1201 extern int push_target (struct target_ops *);
1202
1203 extern int unpush_target (struct target_ops *);
1204
1205 extern void target_pre_inferior (int);
1206
1207 extern void target_preopen (int);
1208
1209 extern void pop_target (void);
1210
1211 /* Does whatever cleanup is required to get rid of all pushed targets.
1212    QUITTING is propagated to target_close; it indicates that GDB is
1213    exiting and should not get hung on an error (otherwise it is
1214    important to perform clean termination, even if it takes a
1215    while).  */
1216 extern void pop_all_targets (int quitting);
1217
1218 /* Like pop_all_targets, but pops only targets whose stratum is
1219    strictly above ABOVE_STRATUM.  */
1220 extern void pop_all_targets_above (enum strata above_stratum, int quitting);
1221
1222 extern CORE_ADDR target_translate_tls_address (struct objfile *objfile,
1223                                                CORE_ADDR offset);
1224
1225 /* Mark a pushed target as running or exited, for targets which do not
1226    automatically pop when not active.  */
1227
1228 void target_mark_running (struct target_ops *);
1229
1230 void target_mark_exited (struct target_ops *);
1231
1232 /* Struct section_table maps address ranges to file sections.  It is
1233    mostly used with BFD files, but can be used without (e.g. for handling
1234    raw disks, or files not in formats handled by BFD).  */
1235
1236 struct section_table
1237   {
1238     CORE_ADDR addr;             /* Lowest address in section */
1239     CORE_ADDR endaddr;          /* 1+highest address in section */
1240
1241     struct bfd_section *the_bfd_section;
1242
1243     bfd *bfd;                   /* BFD file pointer */
1244   };
1245
1246 /* Return the "section" containing the specified address.  */
1247 struct section_table *target_section_by_addr (struct target_ops *target,
1248                                               CORE_ADDR addr);
1249
1250
1251 /* From mem-break.c */
1252
1253 extern int memory_remove_breakpoint (struct bp_target_info *);
1254
1255 extern int memory_insert_breakpoint (struct bp_target_info *);
1256
1257 extern int default_memory_remove_breakpoint (struct gdbarch *, struct bp_target_info *);
1258
1259 extern int default_memory_insert_breakpoint (struct gdbarch *, struct bp_target_info *);
1260
1261
1262 /* From target.c */
1263
1264 extern void initialize_targets (void);
1265
1266 extern void noprocess (void);
1267
1268 extern void target_require_runnable (void);
1269
1270 extern void find_default_attach (struct target_ops *, char *, int);
1271
1272 extern void find_default_create_inferior (struct target_ops *,
1273                                           char *, char *, char **, int);
1274
1275 extern struct target_ops *find_run_target (void);
1276
1277 extern struct target_ops *find_core_target (void);
1278
1279 extern struct target_ops *find_target_beneath (struct target_ops *);
1280
1281 extern int target_resize_to_sections (struct target_ops *target,
1282                                       int num_added);
1283
1284 extern void remove_target_sections (bfd *abfd);
1285
1286 \f
1287 /* Stuff that should be shared among the various remote targets.  */
1288
1289 /* Debugging level.  0 is off, and non-zero values mean to print some debug
1290    information (higher values, more information).  */
1291 extern int remote_debug;
1292
1293 /* Speed in bits per second, or -1 which means don't mess with the speed.  */
1294 extern int baud_rate;
1295 /* Timeout limit for response from target. */
1296 extern int remote_timeout;
1297
1298 \f
1299 /* Functions for helping to write a native target.  */
1300
1301 /* This is for native targets which use a unix/POSIX-style waitstatus.  */
1302 extern void store_waitstatus (struct target_waitstatus *, int);
1303
1304 /* Predicate to target_signal_to_host(). Return non-zero if the enum
1305    targ_signal SIGNO has an equivalent ``host'' representation.  */
1306 /* FIXME: cagney/1999-11-22: The name below was chosen in preference
1307    to the shorter target_signal_p() because it is far less ambigious.
1308    In this context ``target_signal'' refers to GDB's internal
1309    representation of the target's set of signals while ``host signal''
1310    refers to the target operating system's signal.  Confused?  */
1311
1312 extern int target_signal_to_host_p (enum target_signal signo);
1313
1314 /* Convert between host signal numbers and enum target_signal's.
1315    target_signal_to_host() returns 0 and prints a warning() on GDB's
1316    console if SIGNO has no equivalent host representation.  */
1317 /* FIXME: cagney/1999-11-22: Here ``host'' is used incorrectly, it is
1318    refering to the target operating system's signal numbering.
1319    Similarly, ``enum target_signal'' is named incorrectly, ``enum
1320    gdb_signal'' would probably be better as it is refering to GDB's
1321    internal representation of a target operating system's signal.  */
1322
1323 extern enum target_signal target_signal_from_host (int);
1324 extern int target_signal_to_host (enum target_signal);
1325
1326 extern enum target_signal default_target_signal_from_host (struct gdbarch *,
1327                                                            int);
1328 extern int default_target_signal_to_host (struct gdbarch *,
1329                                           enum target_signal);
1330
1331 /* Convert from a number used in a GDB command to an enum target_signal.  */
1332 extern enum target_signal target_signal_from_command (int);
1333
1334 /* Set the show memory breakpoints mode to show, and installs a cleanup
1335    to restore it back to the current value.  */
1336 extern struct cleanup *make_show_memory_breakpoints_cleanup (int show);
1337
1338 \f
1339 /* Imported from machine dependent code */
1340
1341 /* Blank target vector entries are initialized to target_ignore. */
1342 void target_ignore (void);
1343
1344 extern struct target_ops deprecated_child_ops;
1345
1346 #endif /* !defined (TARGET_H) */