gdb/testsuite/ChangeLog

   1 2014-10-29  Yao Qi  <yao@codesourcery.com>
   2
   3         * gdb.base/fileio.c (test_write): Close the file.
   4
   5 2014-10-28  Pedro Alves  <palves@redhat.com>
   6
   7         PR gdb/12623
   8         * gdb.base/sigstep.c (no_handler): New global.
   9         (main): If 'no_handler is true, set the signal handlers to
  10         SIG_IGN.
  11         * gdb.base/sigstep.exp (breakpoint_over_handler): Add
  12         with_sw_watch and no_handler parameters.  Handle them.
  13         (top level) <stepping over handler when stopped at a breakpoint
  14         test>: Add a test axis for testing with a software watchpoint, and
  15         another for testing with the signal handler set to SIG_IGN.
  16         * gdb.base/step-sw-breakpoint-adjust-pc.c: New file.
  17         * gdb.base/step-sw-breakpoint-adjust-pc.exp: New file.
  18
  19 2014-10-28  Pedro Alves  <palves@redhat.com>
  20
  21         PR gdb/17511
  22         * gdb.base/sigstep.c (handler): Add a few more writes to 'done'.
  23         * gdb.base/sigstep.exp (other_handler_location): New global.
  24         (advance): Support stepping into the signal handler, and running
  25         commands while in the handler.
  26         (in_handler_map): New global.
  27         (top level): In the advance test, add combinations for getting
  28         into the handler with stepping commands, and for running commands
  29         in the handler.  Add comment descripting the advancei tests.
  30
  31 2014-10-28  Pedro Alves  <palves@redhat.com>
  32
  33         * gdb.base/sigstep.exp: Use build_executable instead of
  34         prepare_for_testing.
  35         (top level): Move code that starts GDB, runs to main and creates a
  36         display to ...
  37         (restart): ... this new procedure.
  38         (top level): Move backtrace from signal handler test to ...
  39         (validate_backtrace): ... this new procedure.
  40         (advance, advancei): Rename parameter from 'i' to 'cmd'.  Use
  41         with_test_prefix.  Always restart GDB.
  42         (skip_to_handler): Rename parameter from 'i' to 'cmd'.  Use
  43         with_test_prefix.  Always restart GDB.  No need to delete
  44         breakpoints after the test.
  45         (test_skip_handler): Remove prefix parameter.
  46         (skip_over_handler, breakpoint_to_handler)
  47         (breakpoint_to_handler_entry, breakpoint_over_handler): Rename
  48         parameter from 'i' to 'cmd'.  Use with_test_prefix.  Always
  49         restart GDB.  No need to delete breakpoints after the test.
  50         (top level): Use foreach to call the test procedures with
  51         different commands.
  52
  53 2014-10-28  Pedro Alves  <palves@redhat.com>
  54
  55         * gdb.base/sigaltstack.exp: Update to use Bugzilla bug numbers
  56         instead of GNATS numbers.
  57         * gdb.base/sigbpt.exp: Likewise.
  58         * gdb.base/siginfo.exp: Likewise.
  59         * gdb.base/sigstep.exp: Likewise.
  60
  61 2014-10-27  Pedro Alves  <palves@redhat.com>
  62
  63         * gdb.base/sigstep.c (dummy): New global.
  64         (main): Issue a couple writes to the new global.
  65         * gdb.base/sigstep.exp (get_next_pc, test_skip_handler): New
  66         procedures.
  67         (skip_over_handler): Use test_skip_handler.
  68         (top level): Call skip_over_handler for stepi and nexti too.
  69         (breakpoint_over_handler): Use test_skip_handler.
  70         (top level): Call breakpoint_over_handler for stepi and nexti too.
  71
  72 2014-10-27  Yao Qi  <yao@codesourcery.com>
  73
  74         * gdb.trace/tfile.c (adjust_function_address)
  75         [__powerpc64__ && _CALL_ELF != 2]: Get function address from
  76         function descriptor.
  77
  78 2014-10-24  Don Breazeal  <donb@codesourcery.com>
  79
  80         * gdb.base/foll-fork.exp (test_follow_fork,
  81         catch_fork_child_follow): Check for updated fork messages emitted
  82         from infrun.c.
  83         * gdb.base/foll-vfork.exp (vfork_parent_follow_through_step,
  84         vfork_parent_follow_to_bp, vfork_and_exec_child_follow_to_main_bp,
  85         vfork_and_exec_child_follow_through_step): Check for updated vfork
  86         messages emitted from infrun.c.
  87
  88 2014-10-24  Pedro Alves  <palves@redhat.com>
  89
  90         * gdb.base/corefile.exp: Remove references to ultrix.
  91         * gdb.base/interrupt.exp: Likewise.
  92         * gdb.base/whatis.exp: Likewise.
  93         * gdb.gdb/selftest.exp: Likewise.
  94         * gdb.threads/manythreads.exp: Likewise.
  95         * gdb.threads/print-threads.exp: Likewise.
  96         * gdb.threads/pthreads.exp:: Likewise.
  97         * gdb.threads/schedlock.exp: Likewise.
  98
  99 2014-10-24  Siva Chandra Reddy  <sivachandra@google.com>
 100
 101         * gdb.cp/non-trivial-retval.cc: Add a test case.
 102         * gdb.cp/non-trivial-retval.exp: Add a test.
 103
 104 2014-10-20  Yao Qi  <yao@codesourcery.com>
 105
 106         * gdb.python/py-objfile-script-gdb.py.in: Rename it to ...
 107         * gdb.python/py-objfile-script-gdb.py: New file.
 108         * gdb.python/py-objfile-script.exp: Update reference to
 109         py-objfile-script-gdb.py.in.  Use gdb_remote_donwload instead
 110         of remote_download.  Remove the dest file.
 111
 112 2014-10-20  Yao Qi  <yao@codesourcery.com>
 113
 114         * gdb.base/checkpoint.exp: Don't remove file copied on host.
 115         * gdb.base/step-line.exp: Likewise.
 116         * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
 117         * gdb.dwarf2/dw2-basic.exp: Likewise.
 118         * gdb.dwarf2/dw2-compressed.exp: Likewise.
 119         * gdb.dwarf2/dw2-filename.exp: Likewise.
 120         * gdb.dwarf2/dw2-intercu.exp: Likewise.
 121         * gdb.dwarf2/dw2-intermix.exp: Likewise.
 122         * gdb.dwarf2/dw2-producer.exp: Likewise.
 123         * gdb.dwarf2/mac-fileno.exp: Likewise.
 124         * gdb.python/py-frame-args.exp: Likewise.
 125         * gdb.python/py-framefilter.exp: Likewise.
 126         * gdb.python/py-mi.exp: Likewise.
 127         * gdb.python/py-objfile-script.exp: Likewise
 128         * gdb.python/py-pp-integral.exp: Likewise.
 129         * gdb.python/py-pp-re-notag.exp: Likewise.
 130         * gdb.python/py-prettyprint.exp: Likewise.
 131         * gdb.python/py-section-script.exp: Likewise.
 132         * gdb.python/py-typeprint.exp: Likewise.
 133         * gdb.python/py-xmethods.exp: Likewise.
 134         * gdb.stabs/weird.exp: Likewise.
 135         * gdb.xml/tdesc-regs.exp: Likewise.
 136
 137 2014-10-18  Kwok Cheung Yeung  <kcy@codesourcery.com>
 138
 139         * gdb.dwarf2/dw2-dir-file-name.exp (addr_len): New.
 140         (out_cu): Use addr_len for the size of addresses.
 141         (out_line): Likewise.  Size DW_LNE_set_address instruction
 142         according to addr_len.
 143         * gdb.dwarf2/dw2-dir-file-name.c (START_INSNS): New.
 144         (FUNC): Add START_INSNS to definition.
 145
 146 2014-10-18  Yao Qi  <yao@codesourcery.com>
 147
 148         * gdb.base/argv0-symlink.exp: Check argv[0] value if
 149         gdb_has_argv0 return true.
 150         * gdb.guile/scm-value.exp (test_value_in_inferior): Don't
 151         check [target_info exists noargs], check [gdb_has_argv0]
 152         instead.
 153         * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
 154         * lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New
 155         procedures.
 156
 157 2014-10-17  Doug Evans  <dje@google.com>
 158
 159         * gdb.python/py-events.exp: Update expected output for clear_objfiles
 160         event.
 161         * gdb.python/py-events.py: Add clear_objfiles event.
 162
 163 2014-10-17  Doug Evans  <dje@google.com>
 164
 165         * gdb.python/py-objfile.exp: Test progspace attribute.
 166
 167 2014-10-17  Luis Machado  <lgustavo@codesourcery.com>
 168
 169         * gdb.guile/scm-breakpoint.exp: Do not assume any
 170         directory separators when matching source file paths.
 171         * gdb.python/py-breakpoint.exp: Likewise.
 172         * gdb.reverse/break-precsave.exp: Likewise.
 173         * gdb.reverse/break-reverse.exp: Likewise.
 174         * gdb.reverse/consecutive-precsave.exp: Likewise.
 175         * gdb.reverse/finish-precsave.exp: Likewise.
 176         * gdb.reverse/finish-reverse-bkpt.exp: Likewise.
 177         * gdb.reverse/finish-reverse.exp: Likewise.
 178         * gdb.reverse/i386-precsave.exp: Likewise.
 179         * gdb.reverse/i387-env-reverse.exp: Likewise.
 180         * gdb.reverse/i387-stack-reverse.exp: Likewise.
 181         * gdb.reverse/machinestate-precsave.exp: Likewise.
 182         * gdb.reverse/machinestate.exp: Likewise.
 183         * gdb.reverse/sigall-precsave.exp: Likewise.
 184         * gdb.reverse/solib-precsave.exp: Likewise.
 185         * gdb.reverse/step-precsave.exp: Likewise.
 186         * gdb.reverse/until-precsave.exp: Likewise.
 187         * gdb.reverse/watch-precsave.exp: Likewise.
 188         * gdb.reverse/watch-reverse.exp: Likewise.
 189
 190 2014-10-17  Yao Qi  <yao@codesourcery.com>
 191
 192         * lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
 193         * gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.
 194
 195 2014-10-17  Pedro Alves  <palves@redhat.com>
 196
 197         PR gdb/17471
 198         * gdb.base/bg-execution-repeat.c: New file.
 199         * gdb.base/bg-execution-repeat.exp: New file.
 200
 201 2014-10-17  Pedro Alves  <palves@redhat.com>
 202
 203         PR gdb/17300
 204         * gdb.base/continue-all-already-running.c: New file.
 205         * gdb.base/continue-all-already-running.exp: New file.
 206
 207 2014-10-17  Pedro Alves  <palves@redhat.com>
 208
 209         PR gdb/17472
 210         * gdb.base/annota-input-while-running.c: New file.
 211         * gdb.base/annota-input-while-running.exp: New file.
 212
 213 2014-10-17  Pedro Alves  <palves@redhat.com>
 214
 215         * gdb.base/callfuncs.exp: emove references to osf.
 216         * gdb.base/sigall.exp: Likewise.
 217         * gdb.gdb/selftest.exp: Likewise.
 218         * gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
 219         * gdb.mi/non-stop.c: Likewise.
 220         * gdb.mi/pthreads.c: Likewise.
 221         * gdb.reverse/sigall-precsave.exp: Likewise.
 222         * gdb.reverse/sigall-reverse.exp: Likewise.
 223         * gdb.threads/pthreads.c: Likewise.
 224         * gdb.threads/pthreads.exp: Likewise.
 225
 226 2014-10-17  Yao Qi  <yao@codesourcery.com>
 227
 228         * gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't
 229         check 'target_info exists noargs'.
 230         (test_command_prompt_position): Likewise.
 231         (progvar_simple_if_test): Don't check 'target_info exists noargs'.
 232         Remove "set args".
 233         (progvar_simple_while_test): Likewise.
 234         (progvar_complex_if_while_test): Likewise.
 235         (if_while_breakpoint_command_test): Likewise.
 236         (infrun_breakpoint_command_test): Likewise.
 237         (breakpoint_command_test): Likewise.
 238         (watchpoint_command_test): Likewise.
 239         (bp_deleted_in_command_test): Likewise.
 240         (temporary_breakpoint_commands): Likewise.
 241
 242 2014-10-16  Yao Qi  <yao@codesourcery.com>
 243
 244         * gdb.base/remotetimeout.exp: Remove noargs checking.
 245
 246 2014-10-15  Pedro Alves  <palves@redhat.com>
 247
 248         PR breakpoints/9649
 249         * gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
 250         * gdb.base/breakpoint-in-ro-region.exp
 251         (probe_target_hardware_step): New procedure.
 252         (top level): Probe hardware stepping and hardware breakpoint
 253         support.  Test stepping through a read-only region, with both
 254         "breakpoint auto-hw" on and off and both "always-inserted" on and
 255         off.
 256
 257 2014-10-15  Iain Buclaw  <ibuclaw@gdcproject.org>
 258
 259         * gdb.dlang/demangle.exp: Update for demangling changes.
 260
 261 2014-10-15  Siva Chandra Reddy  <sivachandra@google.com>
 262
 263         * gdb.cp/non-trivial-retval.cc: Add new test cases.
 264         * gdb.cp/non-trivial-retval.exp: Add new tests.
 265
 266 2014-10-15  Siva Chandra Reddy  <sivachandra@google.com>
 267
 268         PR c++/13403
 269         PR c++/15154
 270         * gdb.cp/non-trivial-retval.cc: New file.
 271         * gdb.cp/non-trivial-retval.exp: New file.
 272
 273 2014-10-15  Yao Qi  <yao@codesourcery.com>
 274
 275         * gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on
 276         remote host.
 277
 278 2014-10-15  Yao Qi  <yao@codesourcery.com>
 279
 280         * gdb.python/py-symbol.exp: Match file base name if host is
 281         remote, otherwise match file name with dir name.
 282         * gdb.python/py-symtab.exp: Likewise.
 283         * gdb.python/python.exp: Likewise.
 284
 285 2014-10-15  Yao Qi  <yao@codesourcery.com>
 286
 287         * gdb.python/py-symbol.exp: Remove trailing ".*" in the
 288         pattern.
 289         * gdb.python/py-symtab.exp: Likewise.
 290         * gdb.python/python.exp: Remove trailing ".*".  Fix typo
 291         locationn.
 292
 293 2014-10-14  Joel Brobecker  <brobecker@adacore.com>
 294
 295         * gdb.ada/addr_arith: New testcase.
 296
 297 2014-10-14  Maciej W. Rozycki  <macro@codesourcery.com>
 298
 299         * gdb.dwarf2/dw2-case-insensitive-debug.S: Handle 64-bit pointers.
 300         * gdb.dwarf2/dw2-case-insensitive.exp: Update accordingly.
 301         * gdb.dwarf2/dw2-skip-prologue.S: Handle 64-bit pointers.
 302         * gdb.dwarf2/dw2-skip-prologue.exp: Update accordingly.
 303
 304 2014-10-14  Sergio Durigan Junior  <sergiodj@redhat.com>
 305
 306         * gdb.arch/stap-eval-lang-ada.S: Likewise.
 307         * gdb.arch/stap-eval-lang-ada.c: Likewise.
 308         * gdb.arch/stap-eval-lang-ada.exp: New file.
 309
 310 2014-10-14  Yao Qi  <yao@codesourcery.com>
 311
 312         * gdb.mi/mi-var-child.c (nothing1): New function.
 313         (nothing2): New function.
 314         (do_children_tests): Set function pointers by nothing1 and
 315         nothing2.
 316         * gdb.mi/mi-var-child.exp: Step over new added statements.
 317         Update test to match the new output.
 318         * gdb.mi/var-cmd.c (nothing1): New function.
 319         (nothing2): New function.
 320         (do_children_tests): Set function pointers by  nothing1 and
 321         nothing2.
 322         * gdb.mi/mi-var-display.exp: Update test to match output.
 323         Step to the line specified by $line_dct_nothing.
 324         Increase the number of lines to step.
 325
 326 2014-10-14  Yao Qi  <yao@codesourcery.com>
 327
 328         * gdb.mi/mi-var-child.exp: Use mi_varobj_update to simplify
 329         tests.
 330         * gdb.mi/mi2-var-child.exp: Likewise.
 331
 332 2014-10-13  Doug Evans  <dje@google.com>
 333
 334         * gdb.python/py-objfile.exp: Change name of file name test.
 335
 336 2014-10-13  Doug Evans  <dje@google.com>
 337
 338         * gdb.dwarf2/dw2-op-out-param.S: Make DW_FORM_ref4 values be the offset
 339         from the start of the CU.
 340
 341 2014-10-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
 342             Yao Qi  <yao@codesourcery.com>
 343
 344         Fix "save breakpoints" for "catch" command.
 345         * gdb.base/catch-signal.exp: Add gdb_breakpoint "main".
 346         Remove -nonewline.  Match also the added "main" line.
 347
 348 2014-10-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
 349
 350         Fix "save breakpoints" for "disable $bpnum" command.
 351         * gdb.base/save-bp.c (main): Add label.
 352         * gdb.base/save-bp.exp: Add 8th disabled breakpoint.  Match it.
 353
 354 2014-10-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
 355
 356         * gdb.base/save-bp.exp (info break): Use gdb_test_sequence.
 357
 358 2014-10-11  Yao Qi  <yao@codesourcery.com>
 359
 360         * gdb.server/server-kill.exp: Execute command
 361         "set remote trace-status-packet on" before "tstatus".
 362
 363 2014-10-11  Yao Qi  <yao@codesourcery.com>
 364
 365         * gdb.server/server-kill.c: Include sys/types.h and unistd.h.
 366         (main): Call getppid.
 367         * gdb.server/server-kill.exp: Set breakpoint on line "i = 0;"
 368         and continue to it.  Read variable "server_pid".
 369
 370 2014-10-11  Yao Qi  <yao@codesourcery.com>
 371
 372         * gdb.server/server-kill.exp: Remove "delete_breakpoints".
 373
 374 2014-10-11  Yao Qi  <yao@codesourcery.com>
 375
 376         * gdb.threads/thread-find.exp: Don't execute command
 377         "info threads".
 378         * gdb.threads/attach-into-signal.exp (corefunc): Likewise.
 379         * gdb.threads/linux-dp.exp: Don't check the condition
 380         $threads_created equals to zero.
 381
 382 2014-10-10  Pedro Alves  <palves@redhat.com>
 383
 384         * gdb.base/bigcore.exp: Remove references to IRIX.
 385         * gdb.base/funcargs.exp: Likewise.
 386         * gdb.base/interrupt.exp: Likewise.
 387         * gdb.base/mips_pro.exp: Likewise.
 388         * gdb.base/nodebug.exp: Likewise.
 389         * gdb.base/setvar.exp: Likewise.
 390         * lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
 391
 392 2014-10-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
 393             Pedro Alves  <palves@redhat.com>
 394
 395         PR symtab/14466
 396         * gdb.base/vdso-warning.c: New file.
 397         * gdb.base/vdso-warning.exp: New file.
 398
 399 2014-10-02  Doug Evans  <dje@google.com>
 400
 401         * gdb.base/structs.c (main): Don't run forever.
 402
 403 2014-10-02  Pedro Alves  <palves@redhat.com>
 404
 405         * gdb.threads/manythreads.exp (interrupt_and_wait): New procedure.
 406         (top level) <stop threads 1, stop threads 2>: Use it.
 407
 408 2014-10-02  Pedro Alves  <palves@redhat.com>
 409
 410         * gdb.threads/break-while-running.exp (test): Add new
 411         'update_thread_list' argument.  Skip "info threads" if false.
 412         (top level): Add new 'update_thread_list' axis.
 413
 414 2014-10-02  Pedro Alves  <palves@redhat.com>
 415
 416         PR breakpoints/17431
 417         * gdb.base/execl-update-breakpoints.c: New file.
 418         * gdb.base/execl-update-breakpoints.exp: New file.
 419
 420 2014-10-01  Pedro Alves  <palves@redhat.com>
 421
 422         * gdb.base/breakpoint-in-ro-region.c: New file.
 423         * gdb.base/breakpoint-in-ro-region.exp: New file.
 424
 425 2014-10-01  Simon Marchi  <simon.marchi@ericsson.com>
 426
 427         * gdb.mi/mi-exit-code.exp: New file.
 428         * gdb.mi/mi-exit-code.c: New file.
 429
 430 2014-09-30  Yao Qi  <yao@codesourcery.com>
 431
 432         * lib/prelink-support.exp (build_executable_own_libs): Error if
 433         the target isn't native.
 434
 435 2014-09-30  Yao Qi  <yao@codesourcery.com>
 436
 437         * gdb.threads/dlopen-libpthread.exp: Skip it if isnative is
 438         false.
 439
 440 2014-09-22  Pedro Alves  <palves@redhat.com>
 441
 442         * gdb.threads/break-while-running.exp: New file.
 443         * gdb.threads/break-while-running.c: New file.
 444
 445 2014-09-19  Yao Qi  <yao@codesourcery.com>
 446
 447         * gdb.dwarf2/dw2-var-zero-addr.exp: Move test into new proc test.
 448         Invoke test.  Restart GDB with --readnow and invoke test again.
 449
 450 2014-09-19  Yao Qi  <yao@codesourcery.com>
 451
 452         * gdb.base/break-on-linker-gcd-function.exp: Move test into new
 453         proc set_breakpoint_on_gcd_function.  Invoke
 454         set_breakpoint_on_gcd_function.  Restart GDB with --readnow and
 455         invoke set_breakpoint_on_gcd_function again.
 456
 457 2014-09-18  Doug Evans  <dje@google.com>
 458
 459         * gdb.dwarf2/symtab-producer.exp: New file.
 460
 461 2014-09-16  Sergio Durigan Junior  <sergiodj@redhat.com>
 462
 463         * gdb.base/global-var-nested-by-dso-solib1.c: New file.
 464         * gdb.base/global-var-nested-by-dso-solib2.c: Likewise.
 465         * gdb.base/global-var-nested-by-dso.c: Likewise.
 466         * gdb.base/global-var-nested-by-dso.exp: Likewise.
 467
 468 2014-09-16  Sergio Durigan Junior  <sergiodj@redhat.com>
 469             Pedro Alves  <palves@redhat.com>
 470
 471         * gdb.base/watch-bitfields.exp: Pass string other than test file
 472         name to prepare_for_testing.
 473         (watch): New procedure.
 474         (expect_watchpoint): Use with_test_prefix.
 475         (top level): Factor out tests to ...
 476         (test_watch_location, test_regular_watch): ... these new
 477         procedures, and use with_test_prefix and gdb_continue_to_end.
 478
 479 2014-09-16  Patrick Palka  <patrick@parcs.ath.cx>
 480
 481         PR breakpoints/12526
 482         * gdb.base/watch-bitfields.exp: New file.
 483         * gdb.base/watch-bitfields.c: New file.
 484
 485 2014-09-16  Pedro Alves  <palves@redhat.com>
 486
 487         * gdb.base/watchpoint-stops-at-right-insn.exp (test): Compare
 488         software and hardware addresses, not software address against
 489         itself.
 490
 491 2014-09-16  Pedro Alves  <palves@redhat.com>
 492
 493         * gdb.base/watchpoint-stops-at-right-insn.c: New file.
 494         * gdb.base/watchpoint-stops-at-right-insn.exp: New file.
 495
 496 2014-09-16  Pedro Alves  <palves@redhat.com>
 497
 498         * config/vx.exp, config/vxworks.exp, config/vxworks29k.exp: Delete
 499         files.
 500         * gdb.base/a2-run.exp: Remove all code guarded by istarget
 501         "*-*-vxworks*" throughout.
 502         * gdb.base/break.exp: Likewise.
 503         * gdb.base/default.exp: Likewise.
 504         * gdb.base/scope.exp: Likewise.
 505         * gdb.base/sepdebug.exp: Likewise.
 506         * gdb.base/break.c: Remove all code guarded by #ifdef vxworks
 507         throughout.
 508         * gdb.base/run.c: Likewise.
 509         * gdb.base/sepdebug.c: Likewise.
 510         * gdb.hp/gdb.aCC/run.c: Likewise.
 511         * gdb.reverse/until-reverse.c: Likewise.
 512         * lib/gdb.exp (gdb_compile): Remove is_vxworks branch.
 513
 514 2014-09-16  Yao Qi  <yao@codesourcery.com>
 515
 516         * boards/local-remote-host-native.exp: New file.
 517
 518 2014-09-14  Doug Evans  <xdje42@gmail.com>
 519
 520         * gdb.threads/queue-signal.c (thread_count): New variable.
 521         (thread_count_mutex, thread_count_condvar): New variables.
 522         (incr_thread_count, wait_all_threads_running): New functions.
 523         (main): Wait for all threads to be in their thread functions.
 524
 525 2014-09-13  Doug Evans  <xdje42@gmail.com>
 526
 527         * gdb.threads/queue-signal.c: New file.
 528         * gdb.threads/queue-signal.exp: New file.
 529
 530 2014-09-13  Doug Evans  <xdje42@gmail.com>
 531
 532         * lib/gdb.exp (gdb_prompt): Add comment and change initial value to
 533         be consistent with what default_gdb_init uses.
 534         (with_gdb_prompt): Change form of PROMPT argument from a regexp to
 535         the plain text of the prompt.  Add some logging printfs.
 536         * gdb.perf/disassemble.exp: Update call to with_gdb_prompt.
 537
 538 2014-09-12  Pedro Alves  <palves@redhat.com>
 539
 540         * gdb.arch/gdb1558.exp: Replace uses of gdb_expect after
 541         gdb_run_cmd with gdb_test_multiple or gdb_test throughout.
 542         * gdb.arch/i386-size-overlap.exp: Likewise.
 543         * gdb.arch/i386-size.exp: Likewise.
 544         * gdb.arch/i386-unwind.exp: Likewise.
 545         * gdb.base/a2-run.exp: Likewise.
 546         * gdb.base/break.exp: Likewise.
 547         * gdb.base/charset.exp: Likewise.
 548         * gdb.base/chng-syms.exp: Likewise.
 549         * gdb.base/commands.exp: Likewise.
 550         * gdb.base/dbx.exp: Likewise.
 551         * gdb.base/find.exp: Likewise.
 552         * gdb.base/funcargs.exp: Likewise.
 553         * gdb.base/jit-simple.exp: Likewise.
 554         * gdb.base/reread.exp: Likewise.
 555         * gdb.base/sepdebug.exp: Likewise.
 556         * gdb.base/step-bt.exp: Likewise.
 557         * gdb.cp/mb-inline.exp: Likewise.
 558         * gdb.cp/mb-templates.exp: Likewise.
 559         * gdb.objc/basicclass.exp: Likewise.
 560         * gdb.threads/killed.exp: Likewise.
 561
 562 2014-09-12  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
 563
 564         PR tdep/17379
 565         * gdb.arch/powerpc-stackless.S: New file.
 566         * gdb.arch/powerpc-stackless.exp: New file.
 567
 568 2014-09-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
 569
 570         * gdb.base/attach.c: Include unistd.h.
 571         (main): Call alarm.  Add label postloop.
 572         * gdb.base/attach.exp (do_attach_tests): Use gdb_get_line_number,
 573         gdb_breakpoint, gdb_continue_to_breakpoint.
 574         (test_command_line_attach_run): Kill ${testpid} in one exit path.
 575
 576 2014-09-11  Pedro Alves  <palves@redhat.com>
 577
 578         PR gdb/17347
 579         * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
 580         * gdb.base/attach.exp (test_command_line_attach_run): New
 581         procedure.
 582         (top level): Call it.
 583
 584 2014-09-11  Pedro Alves  <palves@redhat.com>
 585
 586         * lib/gdb.exp (spawn_wait_for_attach): New procedure.
 587         * gdb.base/attach.exp (do_attach_tests, do_call_attach_tests)
 588         (do_command_attach_tests): Use spawn_wait_for_attach.
 589         * gdb.base/solib-overlap.exp: Likewise.
 590         * gdb.multi/multi-attach.exp: Likewise.
 591         * gdb.python/py-prompt.exp: Likewise.
 592         * gdb.python/py-sync-interp.exp: Likewise.
 593         * gdb.server/ext-attach.exp: Likewise.
 594
 595 2014-09-11  Gabriel Krisman Bertazi  <gabriel@krisman.be>
 596
 597         * gdb.fortran/array-element.exp: Remove unexpected "continue"
 598         command in testcase.  Simplify testcase.
 599
 600 2014-09-10  Joel Brobecker  <brobecker@adacore.com>
 601
 602         * gdb.dwarf2/dynarr-ptr.exp: Add a few ptype tests.
 603
 604 2014-09-10  Joel Brobecker  <brobecker@adacore.com>
 605
 606         * gdb.dwarf2/dynarr-ptr.exp: Add 'first, 'last and 'length tests.
 607
 608 2014-09-10  Joel Brobecker  <brobecker@adacore.com>
 609
 610         * gdb.dwarf2/dynarr-ptr.exp: Add subscripting tests.
 611
 612 2014-09-10  Joel Brobecker  <brobecker@adacore.com>
 613
 614         * gdb.dwarf2/dynarr-ptr.c: New file.
 615         * gdb.dwarf2/dynarr-ptr.exp: New file.
 616
 617 2014-09-09  Maciej W. Rozycki  <macro@codesourcery.com>
 618
 619         * gdb.base/watchpoint-solib.exp: Increase the timeout by a factor
 620         of 30 rather than hardcoding 120 for a slow test case.  Take the
 621         `gdb,timeout' target setting into account for this calculation.
 622         Don't extend the timeout for the test cases that don't need it.
 623
 624 2014-09-09  Maciej W. Rozycki  <macro@codesourcery.com>
 625
 626         * gdb.reverse/sigall-reverse.exp: Increase the timeout by
 627         a factor of 2 for a slow test case.  Take the `gdb,timeout'
 628         target setting into account for this calculation.
 629         * gdb.reverse/until-precsave.exp: Increase the timeout by
 630         a factor of 15 and 3 respectively rather than adding 120
 631         for a pair of slow test cases.  Take the `gdb,timeout'
 632         target setting into account for this calculation.
 633
 634 2014-09-09  Maciej W. Rozycki  <macro@codesourcery.com>
 635
 636         * lib/gdb.exp (gdb_test_multiple): Remove code to select the
 637         timeout, don't pass one down to gdb_expect.
 638         (gdb_expect): Rework timeout selection.
 639
 640 2014-09-09  Maciej W. Rozycki  <macro@codesourcery.com>
 641
 642         * lib/gdbserver-support.exp (gdbserver_start): Throw an error
 643         exception on timeout.
 644         (gdbserver_run): Catch any `gdbserver_spawn' error exceptions.
 645         (gdbserver_start_extended): Catch any `gdbserver_start' error
 646         exceptions.
 647         (gdbserver_start_multi, mi_gdbserver_start_multi): Likewise.
 648         * lib/mi-support.exp (mi_gdb_target_load): Catch any
 649         `gdbserver_gdb_load' error exceptions.
 650
 651 2014-09-09  Maciej W. Rozycki  <macro@codesourcery.com>
 652
 653         * lib/gdbserver-support.exp (gdbserver_start): Set timeout to
 654         120 on waiting for the TCP socket to open.
 655
 656 2014-09-09  Doug Evans  <xdje42@gmail.com>
 657
 658         * gdb.base/default.exp (show_conv_list): Add _caller_is,
 659         _caller_matches, _any_caller_is, _any_caller_matches.
 660
 661 2014-09-09  Doug Evans  <xdje42@gmail.com>
 662
 663         * gdb.guile/scm-error.exp: Handle guile 2.2 backtrace output.
 664
 665 2014-09-09  Yao Qi  <yao@codesourcery.com>
 666
 667         * gdb.mi/mi-var-display.exp: Set print symbol off.
 668
 669 2014-09-07  Gabriel Krisman Bertazi  <gabriel@krisman.be>
 670
 671         PR gdb/17035
 672         * gdb.base/commands.exp: Add tests to verify user-defined
 673         commands with empty bodies.
 674         * gdb.python/py-cmd.exp: Test that we don't show user-defined
 675         python commands in `show user command`.
 676         * gdb.python/scm-cmd.exp: Test that we don't show user-defined
 677         scheme commands in `show user command`.
 678
 679 2014-09-07  Jan Kratochvil  <jan.kratochvil@redhat.com>
 680
 681         PR python/17355
 682         * gdb.python/amd64-py-framefilter-invalidarg.S: New file.
 683         * gdb.python/py-framefilter-invalidarg-gdb.py.in: New file.
 684         * gdb.python/py-framefilter-invalidarg.exp: New file.
 685         * gdb.python/py-framefilter-invalidarg.py: New file.
 686
 687 2014-09-06  Doug Evans  <xdje42@gmail.com>
 688
 689         PR 15276
 690         * gdb.python/py-caller-is.c: New file.
 691         * gdb.python/py-caller-is.exp: New file.
 692
 693 2014-09-05  Sergio Durigan Junior  <sergiodj@redhat.com>
 694
 695         PR gdb/17235
 696         * gdb.arch/amd64-stap-wrong-subexp.exp: New file.
 697         * gdb.arch/amd64-stap-wrong-subexp.S: Likewise.
 698
 699 2014-09-04  Sergio Durigan Junior  <sergiodj@redhat.com>
 700
 701         PR fortran/17237
 702         * gdb.fortran/print-formatted.exp: New file.
 703         * gdb.fortran/print-formatted.f90: Likewise.
 704
 705 2014-09-03  Sasha Smundak  <asmundak@google.com>
 706
 707         * gdb.python/py-frame.exp: Test Frame.read_register.
 708
 709 2014-09-03  Sergio Durigan Junior  <sergiodj@redhat.com>
 710
 711         PR python/16699
 712         * gdb.python/py-completion.exp: New file.
 713         * gdb.python/py-completion.py: Likewise.
 714
 715 2014-08-28  Doug Evans  <dje@google.com>
 716
 717         * gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when
 718         eax,etc. are live with values set by gdb and thus the compiler can't
 719         use them.
 720         * gdb.arch/i386-pseudo.c (main): Ditto.
 721
 722 2014-08-27  Doug Evans  <dje@google.com>
 723
 724         * lib/gdb.exp (gdb_compile_shlib): Add support for clang.
 725
 726 2014-08-25  Doug Evans  <dje@google.com>
 727
 728         * gdb.mi/basics.c (callee3, callee2, callee1): Specify result type.
 729         (main): Ditto.
 730
 731 2014-08-25  Doug Evans  <dje@google.com>
 732
 733         * gdb.threads/thread-execl.exp: #include <stdio.h>.
 734
 735 2014-08-24  Yao Qi  <yao@codesourcery.com>
 736
 737         * gdb.guile/scm-value.exp (test_lazy_strings): Set print
 738         symbol off.
 739         * gdb.python/py-value.exp (test_lazy_strings): Likewise.
 740
 741 2014-08-22  Doug Evans  <dje@google.com>
 742
 743         PR 17276
 744         * gdb.dwarf2/dw2-single-line-discriminators.S: New file.
 745         * gdb.dwarf2/dw2-single-line-discriminators.c: New file.
 746         * gdb.dwarf2/dw2-single-line-discriminators.exp: New file.
 747
 748 2014-08-22  Yao Qi  <yao@codesourcery.com>
 749
 750         * gdb.python/py-finish-breakpoint.exp: Copy .py file to host.
 751         * gdb.python/py-finish-breakpoint2.exp: Likewise.
 752         * gdb.python/python.exp: Likewise.  Use .py file on the host
 753         instead of the build.
 754
 755 2014-08-21  Jan Kratochvil  <jan.kratochvil@redhat.com>
 756
 757         * gdb.threads/gcore-stale-thread.c: New file.
 758         * gdb.threads/gcore-stale-thread.exp: New file.
 759
 760 2014-08-21  Pedro Alves  <palves@redhat.com>
 761
 762         * gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test.
 763         * gdb.base/gcore-relro-pie.exp: Likewise.
 764         * gdb.base/gcore-relro.exp: Likewise.
 765         * gdb.base/gcore.exp: Likewise.
 766         * gdb.base/print-symbol-loading.exp: Likewise.
 767         * gdb.threads/gcore-thread.exp: Likewise.
 768         * lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command".
 769
 770 2014-08-20  Pedro Alves  <palves@redhat.com>
 771             Jan Kratochvil  <jan.kratochvil@redhat.com>
 772
 773         * Makefile.in (EXTRA_RULES, CC): New variables, get from
 774         configure.
 775         (EXPECT): Handle READ1 being set.
 776         (all): Depend on EXTRA_RULES.
 777         (check-read1, expect-read1, read1.so, read1): New rules.
 778         * README (Testsuite Parameters): Document the READ1 make variable.
 779         (Race detection): New section.
 780         * configure: Regenerate.
 781         * configure.ac: If build==host==target, and running under a
 782         GNU/glibc system, add read1 to the extra Makefile rules.
 783         (EXTRA_RULES): AC_SUBST it.
 784         * lib/read1.c: New file.
 785
 786 2014-08-20  Joel Brobecker  <brobecker@adacore.com>
 787
 788         * gdb.dwarf2/data-loc.exp: Add additional tests exercising
 789         the handling of variables declared as a typedef to an array
 790         which a DW_AT_data_location attribute.
 791
 792 2014-08-19  Andrew Burgess  <aburgess@broadcom.com>
 793             Pedro Alves  <palves@redhat.com>
 794
 795         PR symtab/14604
 796         PR symtab/14605
 797         * gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
 798         gdb_test.
 799
 800 2014-08-19  Pedro Alves  <palves@redhat.com>
 801
 802         * gdb.base/watchpoint-hw-hit-once.c (main): Update comment.
 803
 804 2014-08-19  Yao Qi  <yao@codesourcery.com>
 805
 806         * gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the
 807         right line.
 808
 809 2014-08-18  David Blaikie  <dblaikie@gmail.com>
 810
 811         * boards/fission.exp: Explicitly pass -ggnu-pubnames for clang.
 812
 813 2014-08-18  Joel Brobecker  <brobecker@adacore.com>
 814
 815         * gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound
 816         attribute in array range.
 817
 818 2014-08-18  Joel Brobecker  <brobecker@adacore.com>
 819
 820         * gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files.
 821
 822 2014-08-15  Siva Chandra Reddy  <sivachandra@google.com>
 823
 824         PR c++/17132
 825         * gdb.cp/pr17132.cc: New file.
 826         * gdb.cp/pr17132.exp: New file.
 827
 828 2014-08-15  Siva Chandra Reddy  <sivachandra@google.com>
 829
 830         * gdb.python/py-xmethods.py (A_getarrayind)
 831         (E_method_char_worker.__call__, E_method_int_worker.__call__):
 832         Use 'print' with function call syntax.
 833         (E_method_matcher.match): Fix tab vs space indentation mixup.
 834
 835 2014-08-15  Yao Qi  <yao@codesourcery.com>
 836
 837         * gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
 838         false.
 839
 840 2014-08-15  Yao Qi  <yao@codesourcery.com>
 841
 842         * gdb.cp/casts.exp: Set print symbol off.
 843         * gdb.cp/class2.exp: Likewise.
 844         * gdb.cp/overload.exp: Likewise.
 845         * gdb.cp/templates.exp: Likewise.
 846
 847 2014-08-11  Doug Evans  <dje@google.com>
 848
 849         * gdb.base/print-symbol-loading.exp (test_load_core): Update.
 850         (test_load_shlib): Update.
 851
 852 2014-08-09  Yao Qi  <yao@codesourcery.com>
 853
 854         * gdb.base/display.exp: Invoke is_address_zero_readable.
 855         * gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
 856         * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
 857         * gdb.base/hbreak-unmapped.exp: Return if
 858         is_address_zero_readable returns true.
 859         * gdb.base/signest.exp: Likewise.
 860         * gdb.base/signull.exp: Likewise.
 861         * gdb.base/sigbpt.exp: Likewise.
 862         * gdb.guile/scm-disasm.exp: Do the test if
 863         is_address_zero_readable returns false.
 864         * gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
 865         * gdb.python/py-arch.exp: Likewise.
 866         * gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
 867         * lib/gdb.exp (is_address_zero_readable): New proc.
 868
 869 2014-08-09  Yao Qi  <yao@codesourcery.com>
 870
 871         PR testsuite/13443
 872         * gdb.mi/mi-var-display.exp: Make test messages unique.
 873
 874 2014-08-04  Tom Tromey  <tromey@redhat.com>
 875
 876         * gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug
 877         target 0".
 878
 879 2014-08-04  Tom Tromey  <tromey@redhat.com>
 880
 881         * gdb.base/sss-bp-on-user-bp-2.exp: Match "to_resume", not
 882         "target_resume".
 883
 884 2014-08-01  Joel Brobecker  <brobecker@adacore.com>
 885
 886         * gdb.base/vla-datatypes.c (vla_factory): Add new variable
 887         inner_vla_struct_object_size.
 888         * gdb.base/vla-datatypes.exp: Adjust last test, and mark it
 889         as xfail.
 890
 891 2014-07-30  Pedro Alves  <palves@redhat.com>
 892
 893         * gdb.threads/signal-command-handle-nopass.exp (test): Add
 894         comment.
 895
 896 2014-07-29  Yao Qi  <yao@codesourcery.com>
 897
 898         PR gdb/17206
 899         * gdb.base/until-nodebug.exp: New.
 900
 901 2014-07-28  Doug Evans  <xdje42@gmail.com>
 902
 903         PR guile/17203
 904         * gdb.guile/scm-parameter.exp: Add tests for trying to create
 905         previously existing parameter, and previously ambiguously spelled
 906         parameter.
 907
 908 2014-07-28  Will Newton  <will.newton@linaro.org>
 909
 910         * gdb.base/varargs.exp: Remove KFAILs for ARM.
 911
 912 2014-07-26  Ludovic Courtès  <ludo@gnu.org>
 913             Doug Evans  <xdje42@gmail.com>
 914
 915         PR guile/17146
 916         * gdb.guile/types-module.exp: Add tests for wrong type arguments.
 917
 918 2014-07-25  Pedro Alves  <palves@redhat.com>
 919
 920         * gdb.threads/signal-command-handle-nopass.c: New file.
 921         * gdb.threads/signal-command-handle-nopass.exp: New file.
 922         * gdb.threads/signal-command-multiple-signals-pending.c: New file.
 923         * gdb.threads/signal-command-multiple-signals-pending.exp: New file.
 924         * gdb.threads/signal-delivered-right-thread.c: New file.
 925         * gdb.threads/signal-delivered-right-thread.exp: New file.
 926
 927 2014-07-25  Pedro Alves  <palves@redhat.com>
 928
 929         * gdb.base/double-prompt-target-event-error.exp
 930         (cancel_pagination_in_target_event): Remove '-notransfer <return>'
 931         match.
 932         (cancel_pagination_in_target_event): Rework double prompt
 933         detection.
 934         * gdb.base/paginate-after-ctrl-c-running.exp
 935         (test_ctrlc_while_target_running_paginates): Remove '-notransfer
 936         <return>' match.
 937         * gdb.base/paginate-bg-execution.exp
 938         (test_bg_execution_pagination_return)
 939         (test_bg_execution_pagination_cancel): Remove '-notransfer
 940         <return>' matches.
 941         * gdb.base/paginate-execution-startup.exp
 942         (test_fg_execution_pagination_return)
 943         (test_fg_execution_pagination_cancel): Remove '-notransfer
 944         <return>' matches.
 945         * gdb.base/paginate-inferior-exit.exp
 946         (test_paginate_inferior_exited): Remove '-notransfer <return>'
 947         match.
 948         * lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
 949         * lib/gdb.exp (pagination_prompt): Run text through
 950         string_to_regexp.
 951         (gdb_test_multiple): Match $pagination_prompt instead of
 952         "<return>".
 953         (string_to_regexp): Move to lib/gdb-utils.exp.
 954
 955 2014-07-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
 956
 957         * gdb.arch/amd64-entry-value-paramref.S: New file.
 958         * gdb.arch/amd64-entry-value-paramref.cc: New file.
 959         * gdb.arch/amd64-entry-value-paramref.exp: New file.
 960         * gdb.arch/amd64-optimout-repeat.S: New file.
 961         * gdb.arch/amd64-optimout-repeat.c: New file.
 962         * gdb.arch/amd64-optimout-repeat.exp: New file.
 963
 964 2014-07-17  Jan Kratochvil  <jan.kratochvil@redhat.com>
 965
 966         PR gdb/17170
 967         * gdb.base/statistics.exp: New file.
 968
 969 2014-07-17  Doug Evans  <dje@google.com>
 970
 971         PR gdb/17170
 972         * gdb.base/maint.exp: Update testing of per-command stats.
 973
 974 2014-07-16  Pedro Alves  <palves@redhat.com>
 975
 976         * gdb.trace/tfile.c: Include unistd.h and stdint.h.
 977         (start_trace_file): Guard S_IRGRP and S_IROTH uses behind #ifdef.
 978         (tfile_write_64, tfile_write_16, tfile_write_8, tfile_write_addr)
 979         (tfile_write_buf): New functions.
 980         (add_memory_block): Rewrite using the above.
 981         (adjust_function_address): New function.
 982         (FUNCTION_ADDRESS): New macro.
 983         (write_basic_trace_file): Remove short_x local, and use
 984         tfile_write_16. Change type of func_addr local to unsigned long
 985         long.  Use FUNCTION_ADDRESS instead of handling the Thumb bit
 986         here.  Cast argument of add_memory_block to char pointer.
 987         (write_error_trace_file): Avoid alloca.  Use FUNCTION_ADDRESS.
 988         (main): Remove parameters.
 989         * gdb.trace/tfile.exp: Remove nowarnings.
 990
 991 2014-07-15  Simon Marchi  <simon.marchi@ericsson.com>
 992
 993         * gdb.base/debug-expr.exp: Test string evaluation with
 994         "debug expression" on.
 995
 996 2014-07-15  Pedro Alves  <palves@redhat.com>
 997
 998         * gdb.base/reread.exp: Use clean_restart.
 999
1000 2014-07-15  Pierre Langlois  <pierre.langlois@embecosm.com>
1001
1002         * gdb.arch/avr-flash-qualifer.c: New.
1003         * gdb.arch/avr-flash-qualifer.exp: New.
1004
1005 2014-07-14  Pedro Alves  <palves@redhat.com>
1006
1007         * gdb.base/paginate-after-ctrl-c-running.c: New file.
1008         * gdb.base/paginate-after-ctrl-c-running.exp: New file.
1009
1010 2014-07-14  Pedro Alves  <palves@redhat.com>
1011
1012         * gdb.base/double-prompt-target-event-error.c: New file.
1013         * gdb.base/double-prompt-target-event-error.exp: New file.
1014
1015 2014-07-14  Pedro Alves  <palves@redhat.com>
1016
1017         PR gdb/17072
1018         * gdb.base/paginate-inferior-exit.c: New file.
1019         * gdb.base/paginate-inferior-exit.exp: New file.
1020
1021 2014-07-14  Pedro Alves  <palves@redhat.com>
1022
1023         PR gdb/17072
1024         * gdb.base/paginate-bg-execution.c: New file.
1025         * gdb.base/paginate-bg-execution.exp: New file.
1026
1027 2014-07-14  Pedro Alves  <palves@redhat.com>
1028
1029         PR gdb/17072
1030         * gdb.base/paginate-execution-startup.c: New file.
1031         * gdb.base/paginate-execution-startup.exp: New file.
1032         * lib/gdb.exp (pagination_prompt): New global.
1033         (default_gdb_spawn): New procedure, factored out from
1034         default_gdb_spawn.
1035         (default_gdb_start): Adjust to call default_gdb_spawn.
1036         (gdb_spawn): New procedure.
1037
1038 2014-07-14  Pedro Alves  <palves@redhat.com>
1039
1040         * lib/gdb.exp (gdb_assert): New procedure.
1041         * gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it.
1042
1043 2014-07-14  Pedro Alves  <palves@redhat.com>
1044
1045         * gdb.base/execution-termios.c: New file.
1046         * gdb.base/execution-termios.exp: New file.
1047
1048 2014-07-14  Tom Tromey  <tromey@redhat.com>
1049
1050         * gdb.cp/vla-cxx.cc: New file.
1051         * gdb.cp/vla-cxx.exp: New file.
1052
1053 2014-07-14  Tom Tromey  <tromey@redhat.com>
1054
1055         * gdb.reverse/rerun-prec.c: New file.
1056         * gdb.reverse/rerun-prec.exp: New file.
1057
1058 2014-07-12  Maciej W. Rozycki  <macro@mips.com>
1059             Maciej W. Rozycki  <macro@codesourcery.com>
1060
1061         * lib/gdb-utils.exp: New file.
1062         * lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing
1063         inline `gdb_init_command' processing.
1064         (gdb_start_cmd): Likewise.
1065         * lib/mi-support.exp (mi_run_cmd): Likewise.
1066         * README: Document `gdb_init_command' and `gdb_init_commands'.
1067
1068 2014-07-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
1069
1070         Fix false FAIL running under a very long directory name.
1071         * gdb.base/argv0-symlink.exp: Add "set print repeats 10000"
1072         and "set print elements 10000".  Twice.
1073
1074 2014-07-11  Yao Qi  <yao@codesourcery.com>
1075
1076         * gdb.base/exprs.exp: "set print symbol off".
1077
1078 2014-07-11  Pedro Alves  <palves@redhat.com>
1079
1080         * gdb.threads/kill.c: New file.
1081         * gdb.threads/kill.exp: New file.
1082
1083 2014-07-10  Yao Qi  <yao@codesourcery.com>
1084
1085         * gdb.trace/tfile.c (write_basic_trace_file)
1086         [__thumb__||__thumb2__]: Clear the Thumb bit of the function
1087         address written to trace file.
1088
1089 2014-07-09  Pedro Alves  <palves@redhat.com>
1090
1091         * gdb.base/attach-wait-input.exp: New file.
1092         * gdb.base/attach-wait-input.c: New file.
1093
1094 2014-07-09  Andrew Burgess  <andrew.burgess@embecosm.com>
1095
1096         * gdb.mi/var-cmd.c (do_nested_struct_union_tests): New function
1097         setting up test structures.
1098         (main): Call new test function.
1099         * gdb.mi/mi2-var-child.exp: Create additional breakpoint in new
1100         test function, continue into test function and walk test
1101         structures.
1102
1103 2014-07-02  Yao Qi  <yao@codesourcery.com>
1104
1105         * gdb.trace/entry-values.c: Define labels 'foo_start' and
1106         'bar_start' at the beginning of functions 'foo' and 'bar'
1107         respectively.
1108         * gdb.trace/entry-values.exp: Use 'foo_start' and 'bar_start'
1109         instead of 'foo' and 'bar'.
1110
1111 2014-07-08  Markus Metzger  <markus.t.metzger@intel.com>
1112
1113         * gdb.btrace/segv.exp: New.
1114         * gdb.btrace/segv.c: New.
1115
1116 2014-07-02  Luis Machado  <lgustavo@codesourcery.com>
1117
1118         * gdb.trace/entry-values.exp: Handle powerpc-specific branch
1119         instruction.
1120
1121 2014-06-30  Mark Wielaard  <mjw@redhat.com>
1122
1123         * gdb.base/constvars.c (violent, violet, vips, virgen, vulgar,
1124         vulture, vilify, villar): New volatile array constants.
1125         (vindictive, vegetation): New const volatile array constants.
1126         * gdb.base/volatile.exp: Test volatile and const volatile array
1127         types.
1128
1129 2014-06-30  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1130
1131         * gdb.base/watchpoint-reuse-slot.exp: Handle the case that the
1132         target lacks support for awatch, rwatch, or hbreak.
1133
1134 2014-06-27  Yao Qi  <yao@codesourcery.com>
1135
1136         * gdb.multi/dummy-frame-restore.exp: New.
1137         * gdb.multi/dummy-frame-restore.c: New.
1138
1139 2014-06-25  Markus Metzger  <markus.t.metzger@intel.com>
1140
1141         * gdb.btrace/gcore.exp: New.
1142
1143 2014-06-23  Pedro Alves  <palves@redhat.com>
1144
1145         * gdb.base/watchpoint-reuse-slot.c: New file.
1146         * gdb.base/watchpoint-reuse-slot.exp: New file.
1147
1148 2014-06-23  Siva Chandra Reddy  <sivachandra@google.com>
1149
1150         * gdb.python/py-xmethods.exp: Use "progspace" instead of the
1151         progspace's filename in 'info', 'enable' and 'disable' command
1152         tests.
1153
1154 2014-06-23  Jan Kratochvil  <jan.kratochvil@redhat.com>
1155
1156         * gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
1157         * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
1158         * gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.
1159
1160 2014-06-20  Gary Benson  <gbenson@redhat.com>
1161
1162         * gdb.arch/i386-avx.exp: Fix include file location.
1163         * gdb.arch/i386-sse.exp: Likewise.
1164
1165 2014-06-19  Iain Buclaw  <ibuclaw@gdcproject.org>
1166
1167         * gdb.dlang/expression.exp: New file.
1168
1169 2014-06-19  Pedro Alves  <palves@redhat.com>
1170
1171         * gdb.threads/thread-execl.exp (do_test): New procedure, factored
1172         out from ...
1173         (top level): ... here.  Iterate running tests under different
1174         scheduler-locking settings.
1175
1176 2014-06-18  Luis Machado  <lgustavo@codesourcery.com>
1177
1178         * gdb.cp/nsalias.exp: Set type of low_pc and high_pc entries
1179         to DW_FORM_addr and use non-zero addresses.
1180
1181 2014-06-18  Siva Chandra Reddy  <sivachandra@google.com>
1182
1183         PR gdb/17017
1184         * gdb.python/py-xmethods.cc: Add global function call counters and
1185         increment them in their respective functions.  Remove "cout"
1186         statements.
1187         * gdb.python/py-xmethods.exp: Make tests check the global function
1188         call counters instead of depending on inferior IO.
1189
1190 2014-06-18  Don Breazeal  <donb@codesourcery.com>
1191
1192         * gdb.base/foll-fork.exp (default_fork_parent_follow):
1193         Deleted procedure.
1194         (explicit_fork_parent_follow): Deleted procedure.
1195         (explicit_fork_child_follow): Deleted procedure.
1196         (test_follow_fork): New procedure.
1197         (do_fork_tests): Replace calls to deleted procedures with
1198         calls to test_follow_fork and reset GDB for subsequent
1199         procedure calls.
1200
1201 2014-06-17  Yao Qi  <yao@codesourcery.com>
1202
1203         * gdb.base/wchar.exp: Set $cent to \u00A2 if "host-charset" is
1204         CP1252.
1205
1206 2014-06-17  Luis Machado  <lgustavo@codesourcery.com>
1207
1208         * gdb.mi/mi-var-rtti.cc (type_update_when_use_rtti_test):
1209         Initialize ptr and S explicitly.
1210         (skip_type_update_when_not_use_rtti_test): Likewise.
1211
1212 2014-06-16  Keith Seitz  <keiths@redhat.com>
1213
1214         PR mi/15863
1215         * gdb.mi/mi-var-cmd.exp: Add test for -var-update before
1216         the inferior is started.
1217
1218 2014-06-16  Pedro Alves  <palves@redhat.com>
1219
1220         * gdb.base/break-main-file-remove-fail.c: New file.
1221         * gdb.base/break-main-file-remove-fail.exp: New file.
1222         * gdb.base/break-unload-file.exp: Use build_executable instead of
1223         prepare_for_testing.
1224         (test_break): New parameter "initial_load".  Handle it.
1225         (top level): Add initial_load cmdline/file axis.
1226
1227 2014-06-12  Tom Tromey  <tromey@redhat.com>
1228
1229         * gdb.base/completion.exp: Don't use directory name in test.
1230
1231 2014-06-09  Gary Benson  <gbenson@redhat.com>
1232
1233         * gdb.base/sigall.c [Functions to send signals]: Reorder to
1234         separate the always-available ANSI-standard signals from the
1235         signals that require checking.
1236         (main): Likewise.
1237         * gdb.reverse/sigall-reverse.c [Functions to send signals]:
1238         Likewise.
1239         (main): Likewise.
1240
1241 2014-06-07  Keith Seitz  <keiths@redhat.com>
1242
1243         Revert:
1244         PR c++/16253
1245         * gdb.cp/var-tag.cc: New file.
1246         * gdb.cp/var-tag.exp: New file.
1247         * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
1248         * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
1249         * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
1250         * gdb.dwarf2/dw2-inheritance.exp: Likewise.
1251
1252 2014-06-06  Doug Evans  <xdje42@gmail.com>
1253
1254         * gdb.guile/scm-frame-args.c (foo): Tweak to work with gcc 4.6.3.
1255
1256 2014-06-06  Pedro Alves  <palves@redhat.com>
1257
1258         * gdb.base/sss-bp-on-user-bp-2.exp: Look for target_resume(step)
1259         in target debug output instead of looking at RSP packets,
1260         disabling the test on any target that uses hardware stepping.
1261         Update comments.
1262
1263 2014-06-06  Pedro Alves  <palves@redhat.com>
1264
1265         * gdb.base/break-unload-file.exp: Fix typo.
1266
1267 2014-06-06  Yao Qi  <yao@codesourcery.com>
1268
1269         * gdb.base/jit.exp (one_jit_test): Restrict the pattern
1270         from "jit_function" to "^jit_function".
1271
1272 2014-06-06  Yao Qi  <yao@codesourcery.com>
1273
1274         * gdb.base/async.c (foo): Add one statement.
1275         * gdb.base/async.exp: Get the next instruction address and
1276         match the output of "nexti" by instruction address.  Match
1277         the hex address in the output of "finish".
1278
1279 2014-06-06  Gary Benson  <gbenson@redhat.com>
1280
1281         * gdb.base/call-signals.c: Remove preprocessor conditionals
1282         for always-defined signals SIGINT, SIGILL, SIGABRT, SIGFPE,
1283         SIGSEGV and SIGTERM.
1284         * gdb.base/sigall.c: Likewise.
1285         * gdb.base/unwindonsignal.c: Likewise.
1286         * gdb.reverse/sigall-reverse.c: Likewise.
1287
1288 2014-06-06  Yao Qi  <yao@codesourcery.com>
1289
1290         * gdb.base/hbreak-unmapped.exp: Read memory at address 0.  If
1291         readable, skip the test.
1292
1293 2014-06-06  Yao Qi  <yao@codesourcery.com>
1294
1295         * gdb.threads/staticthreads.c (thread_function): Move the line
1296         setting breakpoint on forward.
1297         * gdb.threads/staticthreads.exp: Update comments.
1298
1299 2014-06-05  Ludovic Courtès  <ludo@gnu.org>
1300
1301         * gdb.guile/scm-value.exp (test_value_in_inferior): Add test
1302         "history-append! type error".
1303
1304 2014-06-05  Simon Marchi  <simon.marchi@ericsson.com>
1305
1306         * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Fix
1307         erroneous dprintf expected input.
1308
1309 2014-06-04  Doug Evans  <xdje42@gmail.com>
1310
1311         * gdb.guile/scm-generics.exp: Delete.
1312
1313 2014-06-04  Doug Evans  <xdje42@gmail.com>
1314
1315         * gdb.guile/scm-breakpoint.exp: Update.
1316         Add tests for breakpoint registration.
1317
1318 2014-06-04  Tom Tromey  <tromey@redhat.com>
1319
1320         * gdb.base/vla-datatypes.exp: Add tests for VLA-in-structure and
1321         VLA-in-union.
1322         * gdb.base/vla-datatypes.c (vla_factory): Add vla_struct,
1323         inner_vla_struct, vla_union types.  Initialize objects of those
1324         types and compute their sizes.
1325
1326 2014-06-04  Nathan Sidwell  <nathan@codesourcery.com>
1327             Hui Zhu  <hui@codesourcery.com>
1328
1329         * gdb.base/fileio.exp: Add test for shell not available as well as
1330         available.
1331         * gdb.base/fileio.c (test_system): Check for shell twice.
1332
1333 2014-06-04  Yao Qi  <yao@codesourcery.com>
1334
1335         * gdb.base/auto-connect-native-target.exp: Remove redundant
1336         space from the regexp pattern.
1337
1338 2014-06-04  Yao Qi  <yao@codesourcery.com>
1339
1340         * gdb.base/default.exp: Replace "child" with "native" in
1341         regexp pattern.
1342
1343 2014-06-03  Siva Chandra Reddy  <sivachandra@google.com>
1344
1345         * gdb.python/py-xmethods.cc: New testcase to test xmethods.
1346         * gdb.python/py-xmethods.exp: New tests to test xmethods.
1347         * gdb.python/py-xmethods.py: Python script supporting the
1348         new testcase and tests.
1349
1350 2014-06-03  Joel Brobecker  <brobecker@adacore.com>
1351             Pedro Alves  <palves@redhat.com>
1352
1353         PR breakpoints/17000
1354         * gdb.base/sss-bp-on-user-bp.exp: Remove kfail.
1355         * gdb.base/sss-bp-on-user-bp-2.exp: Remove kfail.
1356
1357 2014-06-03  Brad Mouring  <bmouring@ni.com>  (tiny patch)
1358
1359         * gdb.base/subst.exp: Add tests to verify partial path matching
1360         output.
1361
1362 2014-06-03  Pedro Alves  <palves@redhat.com>
1363
1364         * gdb.base/sss-bp-on-user-bp-2.exp: Skip if testing with a remote
1365         target that doesn't use software single-stepping.
1366
1367 2014-06-03  Pedro Alves  <palves@redhat.com>
1368
1369         PR breakpoints/17000
1370         * gdb.base/sss-bp-on-user-bp-2.c: New file.
1371         * gdb.base/sss-bp-on-user-bp-2.exp: New file.
1372
1373 2014-06-02  Doug Evans  <xdje42@gmail.com>
1374
1375         * gdb.guile/scm-parameter.exp: New file.
1376
1377 2014-06-02  Doug Evans  <xdje42@gmail.com>
1378
1379         * gdb.guile/scm-cmd.c: New file.
1380         * gdb.guile/scm-cmd.exp: New file.
1381
1382 2014-06-02  Doug Evans  <xdje42@gmail.com>
1383
1384         * gdb.guile/scm-pretty-print.exp: Add tests for objfile and progspace
1385         pretty-printer lookup.
1386         * gdb.guile/scm-pretty-print.scm (pp_s-printer): New function.
1387         (make-pp_s-printer): Call it.
1388         (make-pretty-printer-from-dict): New function.
1389         (lookup-pretty-printer-maker-from-dict): New function.
1390         (*pretty-printer*): Simplify.
1391         (make-objfile-pp_s-printer): New function.
1392         (install-objfile-pretty-printers!): New function.
1393         (make-progspace-pp_s-printer): New function.
1394         (install-progspace-pretty-printers!): New function.
1395         * gdb.guile/scm-progspace.c: New file.
1396         * gdb.guile/scm-progspace.exp: New file.
1397
1398 2014-06-02  Pedro Alves  <palves@redhat.com>
1399
1400         * gdb.base/dprintf-bp-same-addr.c: New file.
1401         * gdb.base/dprintf-bp-same-addr.exp: New file.
1402
1403 2014-06-02  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
1404
1405         * gdb.arch/powerpc-power.exp: Add power8 instructions to the testcase.
1406         * gdb.arch/powerpc-power.s: Likewise.
1407
1408 2014-06-02  Joel Brobecker  <brobecker@adacore.com>
1409
1410         * gdb.base/completion.exp: Remove code aimed at restoring TIMEOUT.
1411
1412 2014-06-01  Yao Qi  <yao@codesourcery.com>
1413
1414         * gdb.base/watchpoint.exp (test_watch_location): Check null
1415         pointer can be dereferenced.  If not, do the test, otherwise
1416         skip it.
1417
1418 2014-05-30  Andrew Burgess  <aburgess@broadcom.com>
1419
1420         * gdb.arch/amd64-invalid-stack-middle.exp: Update expected
1421         results.
1422         * gdb.arch/amd64-invalid-stack-top.exp: Likewise.
1423
1424 2014-05-30  Andrew Burgess  <aburgess@broadcom.com>
1425
1426         * gdb.arch/amd64-invalid-stack-middle.S: New file.
1427         * gdb.arch/amd64-invalid-stack-middle.c: New file.
1428         * gdb.arch/amd64-invalid-stack-middle.exp: New file.
1429         * gdb.arch/amd64-invalid-stack-top.c: New file.
1430         * gdb.arch/amd64-invalid-stack-top.exp: New file.
1431
1432 2014-05-30  Pedro Alves  <palves@redhat.com>
1433
1434         PR breakpoints/17000
1435         * gdb.base/sss-bp-on-user-bp.c: New file.
1436         * gdb.base/sss-bp-on-user-bp.exp: New file.
1437
1438 2014-05-30  David Blaikie  <dblaikie@gmail.com>
1439
1440         * gdb.opt/inline-break.c: Fix clang compatibility by specifying
1441         gnu_inline semantics via attribute.
1442         * gdb.opt/inline-break.exp: Remove -std=c89 now that the test
1443         source explicitly specifies the required semantics.
1444
1445 2014-05-30  Maciej W. Rozycki  <macro@codesourcery.com>
1446
1447         * gdb.reverse/sigall-reverse.exp: Fix a typo.
1448
1449 2014-05-29  Pedro Alves  <palves@redhat.com>
1450             Tom Tromey  <tromey@redhat.com>
1451
1452         * gdb.base/async-shell.exp: Don't enable target-async.
1453         * gdb.base/async.exp
1454         * gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
1455         parameter.  Adjust.
1456         (top level): Don't test with "target-async".
1457         * gdb.base/dprintf-non-stop.exp: Don't enable target-async.
1458         * gdb.base/gdb-sigterm.exp: Don't test with "target-async".
1459         * gdb.base/inferior-died.exp: Don't enable target-async.
1460         * gdb.base/interrupt-noterm.exp: Likewise.
1461         * gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
1462         * gdb.mi/mi-nonstop-exit.exp: Likewise.
1463         * gdb.mi/mi-nonstop.exp: Likewise.
1464         * gdb.mi/mi-ns-stale-regcache.exp: Likewise.
1465         * gdb.mi/mi-nsintrall.exp: Likewise.
1466         * gdb.mi/mi-nsmoribund.exp: Likewise.
1467         * gdb.mi/mi-nsthrexec.exp: Likewise.
1468         * gdb.mi/mi-watch-nonstop.exp: Likewise.
1469         * gdb.multi/watchpoint-multi.exp: Adjust comment.
1470         * gdb.python/py-evsignal.exp: Don't enable target-async.
1471         * gdb.python/py-evthreads.exp: Likewise.
1472         * gdb.python/py-prompt.exp: Likewise.
1473         * gdb.reverse/break-precsave.exp: Don't test with "target-async".
1474         * gdb.server/solib-list.exp: Don't enable target-async.
1475         * gdb.threads/thread-specific-bp.exp: Likewise.
1476         * lib/mi-support.exp: Adjust to use mi-async.
1477
1478 2014-05-29  Pedro Alves  <palves@redhat.com>
1479
1480         PR gdb/13860
1481         * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
1482         reason, even in sync mode.
1483
1484 2014-05-29  Pedro Alves  <palves@redhat.com>
1485             Hui Zhu  <hui@codesourcery.com>
1486
1487         PR PR15693
1488         * gdb.mi/mi-condbreak-call-thr-state-mt.c: New file.
1489         * gdb.mi/mi-condbreak-call-thr-state-st.c: New file.
1490         * gdb.mi/mi-condbreak-call-thr-state.c: New file.
1491         * gdb.mi/mi-condbreak-call-thr-state.exp: New file.
1492
1493 2014-05-28  Joel Brobecker  <brobecker@adacore.com>
1494
1495         * config/monitor.exp (gdb_target_monitor): Replace use of
1496         "set remotebaud" by "set serial baud".
1497
1498 2014-05-26  Andy Wingo  <wingo@igalia.com>
1499
1500         * gdb.guile/scm-breakpoint.exp:
1501         * gdb.guile/scm-gsmob.exp: Update to use plain old object
1502         properties instead of gdb-object-properties.
1503
1504 2014-05-26  Yao Qi  <yao@codesourcery.com>
1505
1506         * gdb.server/no-thread-db.exp: Specify source file name
1507         explicitly when setting a breakpoint.
1508
1509 2014-05-23  Markus Metzger  <markus.t.metzger@intel.com>
1510
1511         * gdb.btrace/vdso.c: New.
1512         * gdb.btrace/vdso.exp: New.
1513
1514 2014-05-23  Markus Metzger  <markus.t.metzger@intel.com>
1515
1516         * gdb.base/gcore.exp (capture_command_output): Move ...
1517         * lib/gdb.exp (capture_command_output): ... here.
1518
1519 2014-05-23  Markus Metzger  <markus.t.metzger@intel.com>
1520
1521         * gdb.btrace/data.exp: Test memory access during btrace replay.
1522
1523 2014-05-22  Simon Marchi  <simon.marchi@ericsson.com>
1524
1525         * lib/mi-support.exp (mi_run_cmd_full): Add comments.
1526
1527 2014-05-21  Pedro Alves  <palves@redhat.com>
1528
1529         PR gdb/13860
1530         * gdb.mi/mi-cli.exp (line_callee4_next_step): New global.
1531         (top level): Test that output related to execution commands is
1532         sent to the console with CLI commands, but not with MI commands.
1533         Test that breakpoint events are always mirrored to the console.
1534         Also expect the new source line to be output after a "next" in
1535         async mode too.  Make it a pass/fail test.
1536         * gdb.mi/mi-solib.exp: Test that the CLI solib event note is
1537         output.
1538         * lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.
1539
1540 2014-05-21  Pedro Alves  <palves@redhat.com>
1541
1542         * gdb.base/list.exp (build_pattern, test_list): New procedures.
1543         Use them to test variations of "list" after reaching a breakpoint.
1544         * gdb.mi/mi-cli.exp (line_main_callme_2): New global.
1545         Test "list" with listsize 10 after reaching a breakpoint.
1546         * gdb.python/python.exp (decode_line current location line
1547         number): Adjust expected line number.
1548
1549 2014-05-21  Simon Marchi  <simon.marchi@ericsson.com>
1550
1551         * lib/mi-support.exp (mi_run_cmd_full): Revert to original
1552         behavior for $args, pass it directly to "run".
1553
1554 2014-05-21  Maciej W. Rozycki  <macro@codesourcery.com>
1555
1556         * lib/gdb.exp (default_gdb_init): Bump `match_max' up from
1557         30000 to 65536.
1558
1559 2014-05-21  Pedro Alves  <palves@redhat.com>
1560
1561         * boards/gdbserver-base.exp (GDBFLAGS): Set to "set
1562         auto-connect-native-target off".
1563         * gdb.base/auto-connect-native-target.c: New file.
1564         * gdb.base/auto-connect-native-target.exp: New file.
1565
1566 2014-05-21  Pedro Alves  <palves@redhat.com>
1567
1568         * gdb.base/default.exp: Test "target native" instead of "target
1569         child".
1570
1571 2014-05-21  Mark Wielaard  <mjw@redhat.com>
1572
1573         * gdb.cp/var-tag.exp (do_global_tests): Handle underlying type.
1574
1575 2014-05-21  Jan Kratochvil  <jan.kratochvil@redhat.com>
1576
1577         Fix TLS access for -static -pthread.
1578         * gdb.threads/staticthreads.c <HAVE_TLS> (tlsvar): New.
1579         <HAVE_TLS> (thread_function, main): Initialize it.
1580         * gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls.
1581         Add clean_restart.
1582         <$have_tls != "">: Check TLSVAR.
1583
1584 2014-05-21  Pedro Alves  <palves@redhat.com>
1585
1586         * gdb.base/dcache-line-read-error.c: New.
1587         * gdb.base/dcache-line-read-error.exp: New.
1588
1589 2014-05-20  Pedro Alves  <palves@redhat.com>
1590
1591         * gdb.base/compare-sections.c: New file.
1592         * gdb.base/compare-sections.exp: New file.
1593
1594 2014-05-20  Pedro Alves  <palves@redhat.com>
1595
1596         * gdb.base/break-idempotent.c: New file.
1597         * gdb.base/break-idempotent.exp: New file.
1598
1599 2014-05-20  Markus Metzger  <markus.t.metzger@intel.com>
1600
1601         * gdb.btrace/nohist.exp: New.
1602
1603 2014-05-20  Yao Qi  <yao@codesourcery.com>
1604
1605         * lib/gdb.exp (gdb_init): Set timeout if test file is under
1606         gdb.reverse directory and gdb_reverse_timeout exists in board
1607         setting.
1608         * README: Document gdb_reverse_timeout.
1609
1610 2014-05-20  Yao Qi  <yao@codesourcery.com>
1611
1612         * lib/gdb.exp (default_gdb_init): Rename argument 'args' by
1613         'test_file_name'.  Treat args as a string instead of a list.
1614         (gdb_init): Rename argument 'args' by 'test_file_name'.
1615
1616 2014-05-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
1617
1618         * gdb.arch/powerpc-power.exp: New file.
1619         * gdb.arch/powerpc-power.s: New file.
1620
1621 2014-05-16  Doug Evans  <dje@google.com>
1622
1623         * gdb.base/Makefile.in (EXECUTABLES): Add completion.
1624         * gdb.base/completion.exp: Check that all expected files exist
1625         before doing file completion.
1626
1627 2014-05-16  Doug Evans  <dje@google.com>
1628
1629         * gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir):
1630         Update.
1631         (do_syscall_tests_without_xml): Update.
1632
1633 2014-05-16  Pedro Alves  <palves@redhat.com>
1634
1635         * lib/mi-support.exp (mi_expect_stop): On timeout, say "timeout"
1636         instead of "unknown output after running".
1637
1638 2014-05-16  Yao Qi  <yao@codesourcery.com>
1639
1640         * gdb.dwarf2/dw2-filename.exp: Copy file1.txt to host.  Remove
1641         file1.txt from host at the end.
1642         * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
1643
1644 2014-05-15  Doug Evans  <dje@google.com>
1645
1646         * gdb.dwarf2/fission-reread.S: Remove directory from .dwo file path.
1647         * gdb.dwarf2/fission-reread.exp: Set debug-file-directory before
1648         loading file.  Add test for TU lookup.
1649
1650 2014-05-15  Simon Marchi  <simon.marchi@ericsson.com>
1651
1652         * lib/mi-support.exp (mi_run_cmd_full): Set arguments by
1653         calling "-exec-arguments" or "set args" before running the
1654         inferior.
1655
1656 2014-05-15  Simon Marchi  <simon.marchi@ericsson.com>
1657
1658         * lib/mi-support.exp (mi_expect_stop): Expect message for
1659         inferiors that exit with non-zero exit code.
1660
1661 2014-05-14  Yao Qi  <yao@codesourcery.com>
1662
1663         * gdb.mi/mi-file.exp (test_file_list_exec_source_file): Don't
1664         match absolute path on remote host.
1665         (test_file_list_exec_source_files): Remove "/" from the
1666         pattern.
1667
1668 2014-05-14  Yao Qi  <yao@codesourcery.com>
1669
1670         * boards/local-remote-host-notty.exp (${board}_file): New
1671         proc.
1672
1673 2014-05-07  Kyle McMartin  <kyle@redhat.com>
1674
1675         Pushed by Joel Brobecker  <brobecker@adacore.com>.
1676         * gdb.arch/aarch64-atomic-inst.c: New file.
1677         * gdb.arch/aarch64-atomic-inst.exp: New file.
1678
1679 2014-05-07  Yao Qi  <yao@codesourcery.com>
1680
1681         * gdb.dwarf2/dwzbuildid.exp: Match output "No symbol "the_int"
1682         in current context" too.
1683
1684 2014-05-05  Keith Seitz  <keiths@redhat.com>
1685
1686         * gdb.linespec/ls-dollar.exp: Add test for linespec
1687         file:convenience_variable.
1688
1689 2014-05-05  Yao Qi  <yao@codesourcery.com>
1690
1691         * gdb.trace/unavailable.exp (gdb_collect_args_test): Save
1692         traceframes into tfile and ctf trace files.  Read data from
1693         trace file and test collected data.
1694         (gdb_collect_locals_test): Likewise.
1695         (gdb_unavailable_registers_test): Likewise.
1696         (gdb_unavailable_floats): Likewise.
1697         (gdb_collect_globals_test): Likewise.
1698         (top-level): Append "ctf" to trace_file_targets if GDB
1699         supports.
1700
1701 2014-05-05  Yao Qi  <yao@codesourcery.com>
1702
1703         * gdb.trace/unavailable.exp (gdb_collect_args_test): Move some
1704         code to ...
1705         (gdb_collect_args_test_1): ... it.  New proc.
1706         (gdb_collect_locals_test): Move some code to ...
1707         (gdb_collect_locals_test_1): ... it.  New proc.
1708         (gdb_unavailable_registers_test): Move some code to ...
1709         (gdb_unavailable_registers_test_1): ... it.  New proc.
1710         (gdb_unavailable_floats): Move some code to ...
1711         (gdb_unavailable_floats_1): ... it.  New proc.
1712
1713 2014-05-02  Sergio Durigan Junior  <sergiodj@redhat.com>
1714
1715         * gdb.arch/amd64-stap-optional-prefix.S (main): Add several
1716         probes to test for bitness recognition.
1717         * gdb.arch/amd64-stap-optional-prefix.exp
1718         (test_probe_value_without_reg): New procedure.
1719         Add code to test for different kinds of bitness.
1720
1721 2014-05-02  Sergio Durigan Junior  <sergiodj@redhat.com>
1722
1723         PR breakpoints/16889
1724         * gdb.arch/amd64-stap-optional-prefix.S: New file.
1725         * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
1726
1727 2014-05-01  Pedro Alves  <palves@redhat.com>
1728
1729         * lib/gdb.exp (gdb_load): Extend comment.  Skip calling
1730         gdb_file_cmd if no file is specified.
1731         * boards/native-extended-gdbserver.exp (gdb_load): Use the
1732         last_loaded_file to set the remote exec-file.
1733
1734 2014-05-01  Pedro Alves  <palves@redhat.com>
1735
1736         * boards/local-remote-host.exp: New file.
1737
1738 2014-05-01  Pedro Alves  <palves@redhat.com>
1739
1740         * boards/local-remote-host.exp: Rename to ...
1741         * boards/local-remote-host-notty.exp: ... this.
1742
1743 2014-04-28  Joel Brobecker  <brobecker@adacore.com>
1744
1745         * gdb.ada/dyn_arrayidx: New testcase.
1746
1747 2014-04-26  Yao Qi  <yao@codesourcery.com>
1748
1749         * gdb.dwarf2/dwz.exp: Compile main.c to object.  Restart GDB
1750         and compute the length of function main.  Save it in
1751         $main_length.
1752         (Dwarf::assemble): Use $main_length instead of hard-coded 10.
1753         (top-level): Use gdb_compile to compile objects into
1754         executable and restart GDB.  Remove invocation to
1755         prepare_for_testing.
1756
1757 2014-04-25  Simon Marchi  <simon.marchi@ericsson.com>
1758             Pedro Alves  <palves@redhat.com>
1759
1760         PR server/16255
1761         * gdb.multi/multi-attach.c: New file.
1762         * gdb.multi/multi-attach.exp: New file.
1763
1764 2014-04-25  Pedro Alves  <palves@redhat.com>
1765
1766         * gdb.base/cond-eval-mode.exp (warning): Move trailing \r\n to
1767         user.
1768         (top level): Test that "set remote conditional-breakpoints-packet
1769         off" works as intended.
1770         * gdb.base/dprintf.exp: Test that "set remote
1771         breakpoint-commands-packet off" works as intended.
1772         * gdb.trace/change-loc.exp (tracepoint_install_in_trace_disabled):
1773         New function.
1774         (top level): Call it.
1775         * gdb.trace/ftrace.exp (test_fast_tracepoints): Test that "set
1776         remote fast-tracepoints-packet off" works as intended.
1777         * gdb.trace/qtro.exp (gdb_is_target_remote): Moved ...
1778         * lib/gdb.exp (gdb_is_target_remote): ... here.
1779
1780 2014-04-24  David Blaikie  <dblaikie@gmail.com>
1781
1782         * gdb.base/catch-syscall.c: Make unreferenced statics non-static to
1783         ensure clang would not discard them.
1784         * gdb.base/gdbvars.c: Ditto.
1785         * gdb.base/memattr.c: Ditto.
1786         * gdb.base/whatis.c: Ditto.
1787         * gdb.python/py-prettyprint.c: Ditto.
1788         * gdb.trace/actions.c: Ditto.
1789         * gdb.cp/ptype-cv-cp.cc: Mark unused global const int as used to
1790         ensure clang would not discard it.
1791
1792 2014-04-24  David Blaikie  <dblaikie@gmail.com>
1793
1794         * gdb.stabs/gdb11479.c (tag_dummy_enum): introduce a variable to cause
1795         clang to emit the full definition of type required by the test
1796         * gdb.stabs/gdb11479.exp (do_test): correct a typo in a test message
1797
1798 2014-04-24  David Blaikie  <dblaikie@gmail.com>
1799
1800         * gdb.cp/pr10728-x.cc (main::x): Return by value instead of pointer to
1801         coax Clang into emitting the definition of the type.
1802         * gdb.cp/pr10728-x.h (y): Ditto.
1803         * gdb.cp/pr10728-y.cc (y): Ditto.
1804
1805 2014-04-24  David Blaikie  <dblaikie@gmail.com>
1806
1807         * gdb.base/label.exp: XFAIL label related tests under Clang.
1808         * gdb.cp/cplabel.exp: Ditto.
1809         * gdb.linespec/ls-errs.exp: Refactor tests to execute directly and XFAIL
1810         under Clang those using labels.
1811
1812 2014-04-25  Yao Qi  <yao@codesourcery.com>
1813
1814         * gdb.dwarf2/dwz.exp (Dwarf::assemble): Remove unused
1815         double_label.
1816         * gdb.dwarf2/dwzbuildid.exp (Dwarf::assemble): Remove
1817         partial_label and double_label.
1818
1819 2014-04-24  David Blaikie  <dblaikie@gmail.com>
1820
1821         * gdb.python/lib-types.exp: Fix test and xfail under gcc due to gcc/55641.
1822
1823 2014-04-24  David Blaikie  <dblaikie@gmail.com>
1824
1825         * gdb.cp/cpexprs.cc: Move braces to the same line as the start
1826         of the function to work across GCC and Clang.
1827         * gdb.cp/cpexprs.exp: Account for GCC/Clang difference in vtable
1828         pointer types (const void ** const V void **).
1829
1830 2014-04-24  Michael Sturm  <michael.sturm@mintel.com>
1831             Walfred Tedeschi  <walfred.tedeschi@intel.com>
1832
1833         * Makefile.in (EXECUTABLES): Added i386-avx512.
1834         * gdb.arch/i386-avx512.c: New file.
1835         * gdb.arch/i386-avx512.exp: Likewise.
1836
1837 2014-04-23  Keith Seitz  <keiths@redhat.com>
1838
1839         * lib/mi-support.exp (mi_list_breakpoints): Delete.
1840         (mi_make_breakpoint_table): New procedure.
1841         (mi_create_breakpoint): Use mi_make_breakpoint
1842         and return the result.
1843         (mi_make_breakpoint): New procedure.
1844         (mi_build_kv_pairs): New procedure.
1845
1846         * gdb.mi/mi-break.exp: Remove unused globals,
1847         update mi_create_breakpoint usage, and use mi_make_breakpoint_table.
1848         All callers updated.
1849         * gdb.mi/mi-dprintf.exp: Use variable to track command
1850         number.
1851         Update all callers of mi_create_breakpoint and use
1852         mi_make_breakpoint_table.
1853         Remove any unused global variables.
1854         * gdb.mi/mi-nonstop.exp: Likewise.
1855         * gdb.mi/mi-nsintrall.exp: Likewise.
1856         * gdb.mi/mi-nsmoribund.exp: Likewise.
1857         * gdb.mi/mi-nsthrexec.exp: Likewise.
1858         * gdb.mi/mi-reverse.exp: Likewise.
1859         * gdb.mi/mi-simplerun.exp: Likewise.
1860         * gdb.mi/mi-stepn.exp: Likewise.
1861         * gdb.mi/mi-syn-frame.exp: Likewise.
1862         * gdb.mi/mi-until.exp: Likewise.
1863         * gdb.mi/mi-var-cp.exp: Likewise.
1864         * gdb.mi/mi-var-display.exp: Likewise.
1865         * gdb.mi/mi2-amd64-entry-value.exp: Likewise.
1866         * gdb.mi/mi2-var-child.exp: Likewise.
1867         * gdb.mi/mi-vla-c99.exp: Likewise.
1868         * lib/mi-support.exp: Likewise.
1869
1870         From Ian Lance Taylor  <iant@cygnus.com>:
1871         * lib/gdb.exp (parse_args): New procedure.
1872
1873 2014-04-23  Pedro Alves  <palves@redhat.com>
1874
1875         * gdb.base/break-unload-file.c: New file.
1876         * gdb.base/break-unload-file.exp: New file.
1877         * gdb.base/sym-file-lib.c (baz): New function.
1878         * gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
1879         field.
1880         (load): Store the segment's mapped size.
1881         (unload): New function.
1882         (unload_shlib): New function.
1883         * gdb.base/sym-file-loader.h (unload_shlib): New declaration.
1884         * gdb.base/sym-file-main.c (main): Unload, and reload the library,
1885         set a breakpoint at baz, and call it.
1886         * gdb.base/sym-file.exp: New tests for stale breakpoint
1887         instructions.
1888
1889 2014-04-23  Pedro Alves  <palves@redhat.com>
1890
1891         * gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
1892         * gdb.base/hbreak-in-shr-unsupported.c: New file.
1893         * gdb.base/hbreak-in-shr-unsupported.exp: New file.
1894         * gdb.base/hbreak-unmapped.c: New file.
1895         * gdb.base/hbreak-unmapped.exp: New file.
1896         * gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
1897         * lib/gdb.exp (gdb_is_target_remote): ... here.
1898
1899 2014-04-22  Pedro Alves  <palves@redhat.com>
1900
1901         * gdb.base/consecutive-step-over.c: New file.
1902         * gdb.base/consecutive-step-over.exp: New file.
1903
1904 2014-04-22  Pedro Alves  <palves@redhat.com>
1905
1906         * lib/gdb.exp (gdb_continue_to_breakpoint): Use gdb_test_multiple
1907         instead of send_gdb/gdb_expect.
1908
1909 2014-04-22  Yao Qi  <yao@codesourcery.com>
1910
1911         * lib/trace-support.exp (generate_tracefile): New procedure.
1912         * gdb.trace/tfile.exp: Skip the test if generate_tracefile
1913         return 0.
1914         * gdb.trace/mi-traceframe-changed.exp: Invoke test_tfind_tfile
1915         if generate_tracefile returns 1.
1916
1917 2014-04-18  Tom Tromey  <palves@redhat.com>
1918             Pedro alves  <tromey@redhat.com>
1919
1920         PR backtrace/15558
1921         * gdb.opt/inline-bt.exp: Test backtracing from an inline function
1922         with a backtrace limit.
1923         * gdb.python/py-frame-inline.exp: Test running to an inline
1924         function with a backtrace limit, and printing the newest frame.
1925         * gdb.python/py-frame-inline.c (main): Call f.
1926
1927 2014-04-17  Marcus Shawcroft  <marcus.shawcroft@arm.com>
1928
1929         * gdb.java/jnpe.exp: Drop srcdir from untested path.
1930
1931 2014-04-17  Marcus Shawcroft  <marcus.shawcroft@arm.com>
1932
1933         * lib/gdb.exp (gdb_compile_pthreads, gdb_compile_objc):
1934         Drop prefix from unsupported source file path.
1935
1936 2014-04-17  Yao Qi  <yao@codesourcery.com>
1937
1938         * lib/gdb.exp (with_target_charset): New proc.
1939         * gdb.base/printcmds.exp (test_print_all_chars): Wrap tests with
1940         with_target_charset.
1941         (test_print_strings): Likewise.
1942         (test_repeat_bytes): Likewise.
1943         * gdb.base/setvar.exp: Set target-charset to ASCII temporarily
1944         for some tests.
1945
1946 2014-04-16  Keith Seitz  <keiths@redhat.com>
1947
1948         PR gdb/15827
1949         * gdb.dwarf2/corrupt.c: New file.
1950         * gdb.dwarf2/corrupt.exp: New file.
1951
1952 2014-04-16  Keith Seitz  <keiths@redhat.com>
1953
1954         PR c++/16597
1955         * gdb.cp/namelessclass.cc: New file.
1956         * gdb.cp/namelessclass.exp: New file.
1957         * gdb.cp/namelessclass.S: New file.
1958
1959 2014-04-16  Doug Evans  <dje@google.com>
1960
1961         * lib/gdbserver-support.exp (gdbserver_default_get_remote_address):
1962         Add comment.
1963         (gdbserver_default_get_comm_port): New function.
1964         (gdbserver_start): Check if board file provided
1965         "gdbserver,get_comm_port" and use it if so.
1966         * boards/native-stdio-gdbserver.exp (sockethost): Set to "".
1967         (gdb,socketport): Set to "stdio".
1968         (gdbserver,get_comm_port): Set to ${board}_get_comm_port.
1969         (stdio_gdbserver_template): Delete.
1970         (${board}_get_remote_address): Update.
1971         (${board}_build_remote_cmd): Delete.
1972         (${board}_get_comm_port): New function.
1973         (${board}_spawn): Update.
1974         * boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd):
1975         Delete.
1976         (${board}_get_remote_address): Update.
1977         (${board}_get_comm_port): New function.
1978
1979 2014-04-16  Andrew Burgess  <aburgess@broadcom.com>
1980
1981         * gdb.base/memattr.exp: Improve regexps to handle memory regions
1982         appearing in any order.
1983
1984 2014-04-15  Doug Evans  <dje@google.com>
1985
1986         * gdb.gdb/selftest.exp (do_steps_and_nexts): Don't reference
1987         uninitialized value of "description".
1988
1989 2014-04-15  Keith Seitz  <keiths@redhat.com>
1990
1991         * gdb.mi/mi-simplerun.exp (test_breakpoints_creation_and_listing):
1992         Remove unused globals.
1993         (test_running_the_program): Likewise.
1994         (test_controlled_execution): Likewise.
1995         (test_controlling_breakpoints): Likewise.
1996         (test_program_termination): Likewise.
1997
1998 2014-04-15  Keith Seitz  <keiths@redhat.com>
1999
2000         * gdb.mi/mi-break.exp (test_tbreak_creation_and_listing): Remove
2001         unused globals.
2002         (test_rbreak_creation_and_listing): Likewise.
2003         (test_ignore_count): Likewise.
2004         (test_error): Likewise.
2005
2006 2014-04-15  Pedro Alves  <palves@redhat.com>
2007
2008         * gdb.base/sym-file-loader.h: Move inclusion of <inttypes.h>,
2009         <ansidecl.h>, <elf/common.h> and <elf/external.h> to
2010         sym-file-loader.c.
2011         (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
2012         (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
2013         to sym-file-loader.c.
2014         (struct library): Forward declare.
2015         (load_shlib, lookup_function): Change prototypes.
2016         (find_shstrtab, find_strtab, find_shdr, find_symtab)
2017         (translate_offset): Remove declarations.
2018         (get_text_addr): New declaration.
2019         * gdb.base/sym-file-loader.c: Move inclusion of <inttypes.h>,
2020         <ansidecl.h>, <elf/common.h> and <elf/external.h> here from
2021         sym-file-loader.h.
2022         (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
2023         (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
2024         here from sym-file-loader.h.
2025         (struct library): New structure.
2026         (load_shlib, lookup_function): Change prototypes and adjust to
2027         work with a struct library.
2028         (find_shstrtab, find_strtab, find_shdr, find_symtab)
2029         (translate_offset): Make static.
2030         (get_text_addr): New function.
2031         * gdb.base/sym-file-main.c (main): Adjust to new loader interface.
2032
2033 2014-04-15  Pedro Alves  <palves@redhat.com>
2034
2035         * gdb.base/sym-file-loader.c: Fix typo.  SELF_LINK, not SELK_LINK.
2036
2037 2014-04-15  Pedro Alves  <palves@redhat.com>
2038
2039         * gdb.base/sym-file-loader.c: Include <limits.h>.
2040         (SELF_LINK): New define.
2041         (get_origin): New function.
2042         (load_shlib): Use it.
2043         * gdb.base/sym-file.exp: Don't early return if the target is
2044         remote.  Use runto_main, and issue fail is that fails.  Use
2045         gdb_load_shlibs.
2046         (shlib_name): Delete.
2047         (lib_so, lib_syms, lib_dlopen): New globals.  Use them throughout.
2048
2049 2014-04-15  Pedro Alves <palves@redhat.com>
2050
2051         * gdb.base/sym-file.exp: Remove regex characters from test
2052         message.  Don't refer to breakpoint numbers in test messages.
2053
2054 2014-04-14  Keith Seitz  <keiths@redhat.com>
2055
2056         PR c++/16253
2057         * gdb.cp/var-tag.cc: New file.
2058         * gdb.cp/var-tag.exp: New file.
2059         * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
2060         * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
2061         * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
2062         * gdb.dwarf2/dw2-inheritance.exp: Likewise.
2063
2064 2014-04-14  Tom Tromey  <tromey@redhat.com>
2065
2066         * gdb.cp/classes.exp (test_enums): Handle underlying type.
2067         * gdb.dwarf2/enum-type.exp: Add test for enum with underlying
2068         type.
2069         * gdb.cp/enum-class.exp: New file.
2070         * gdb.cp/enum-class.cc: New file.
2071
2072 2014-04-14  Tom Tromey  <tromey@redhat.com>
2073
2074         * gdb.dwarf2/enum-type.exp: New file.
2075
2076 2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>
2077
2078         * gdb.mi/mi-vla-c99.exp: New file.
2079         * gdb.mi/vla.c: New file.
2080
2081 2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>
2082
2083         * gdb.base/vla-datatypes.c: New file.
2084         * gdb.base/vla-datatypes.exp: New file.
2085
2086 2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>
2087
2088         * gdb.base/vla-ptr.c: New file.
2089         * gdb.base/vla-ptr.exp: New file.
2090
2091 2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>
2092
2093         * gdb.dwarf2/count.exp: New file.
2094
2095 2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>
2096
2097         * gdb.base/vla-sideeffect.c: New file.
2098         * gdb.base/vla-sideeffect.exp: New file.
2099
2100 2014-04-14  David Blaikie <dblaikie@gmail.com>
2101
2102         * gdb.mi/non-stop.c: Add return value for non-void function return
2103         statement.
2104         * gdb.threads/staticthreads.c: Ditto.
2105
2106 2014-04-12  Siva Chandra Reddy  <sivachandra@google.com>
2107             Doug Evans  <xdje42@gmail.com>
2108
2109         * gdb.guile/scm-value.c: Improve test case.
2110         * gdb.guile/scm-value.exp: Add new test.
2111
2112 2014-04-11  David Blaikie  <dblaikie@gmail.com>
2113
2114         * gdb.opt/inline-break.exp: Explicitly specify -std=gnu89 to
2115         override Clang's default.
2116
2117 2014-04-11  Joel Brobecker  <brobecker@adacore.com>
2118
2119         Revert the following changes (regressions):
2120
2121         * gdb.base/vla-sideeffect.c: New file.
2122         * gdb.base/vla-sideeffect.exp: New file.
2123
2124         * gdb.dwarf2/count.exp: New file.
2125
2126         * gdb.base/vla-multi.c: New file.
2127         * gdb.base/vla-multi.exp: New file.
2128
2129         * gdb.base/vla-ptr.c: New file.
2130         * gdb.base/vla-ptr.exp: New file.
2131
2132         * gdb.base/vla-datatypes.c: New file.
2133         * gdb.base/vla-datatypes.exp: New file.
2134
2135         * gdb.mi/mi-vla-c99.exp: New file.
2136         * gdb.mi/vla.c: New file.
2137
2138 2014-04-11  Keith Seitz  <keiths@redhat.com>
2139
2140         PR c++/16675
2141         * gdb.cp/cpsizeof.exp: New file.
2142         * gdb.cp/cpsizeof.cc: New file.
2143
2144 2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>
2145
2146         * gdb.mi/mi-vla-c99.exp: New file.
2147         * gdb.mi/vla.c: New file.
2148
2149 2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>
2150
2151         * gdb.base/vla-datatypes.c: New file.
2152         * gdb.base/vla-datatypes.exp: New file.
2153
2154 2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>
2155
2156         * gdb.base/vla-ptr.c: New file.
2157         * gdb.base/vla-ptr.exp: New file.
2158
2159 2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>
2160
2161         * gdb.base/vla-multi.c: New file.
2162         * gdb.base/vla-multi.exp: New file.
2163
2164 2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>
2165
2166         * gdb.dwarf2/count.exp: New file.
2167
2168 2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>
2169
2170         * gdb.base/vla-sideeffect.c: New file.
2171         * gdb.base/vla-sideeffect.exp: New file.
2172
2173 2014-04-11  Yao Qi  <yao@codesourcery.com>
2174
2175         * gdb.base/completion.exp: Check file exists before running tests
2176         on file completion.
2177
2178 2014-04-10  Pedro Alves  <palves@redhat.com>
2179
2180         * gdb.base/cond-eval-mode.c: New file.
2181         * gdb.base/cond-eval-mode.exp: Use standard_testfile.  Adjust
2182         prepare_for_testing to build the new file.  Check result of
2183         runto_main.
2184         (test_break, test_watch): New procedures.
2185         (top level): Use them.
2186
2187 2014-04-08  Pierre Muller  <muller@sourceware.org>
2188
2189         * gdb.base/printcmds.exp (test_artificial_arrays): Disable
2190         Ctrl-V use for mingw hosts.
2191
2192 2014-04-07  Siva Chandra Reddy  <sivachandra@google.com>
2193
2194         * gdb.python/py-value.c: Improve test case.
2195         * gdb.python/py-value.exp: Add new test.
2196
2197 2014-04-07  David Blaikie  <dblaikie@gmail.com>
2198
2199         * lib/compiler.c: Identify the clang compiler.
2200         * lib/compiler.cc: Ditto.
2201
2202 2014-04-03  Yao Qi  <yao@codesourcery.com>
2203
2204         * gdb.base/setshow.exp: Invoke string_to_regexp to HOME and PWD.
2205
2206 2014-04-01  Anton Blanchard  <anton@samba.org>
2207
2208         * gdb.arch/ppc64-atomic-inst.exp: Use untested.  Make test
2209         messages unique.
2210
2211 2014-04-01  Anton Blanchard  <anton@samba.org>
2212
2213         * gdb.arch/ppc64-atomic-inst.exp: Use standard_testfile,
2214         prepare_for_testing.
2215
2216 2014-04-01  Anton Blanchard  <anton@samba.org>
2217
2218         * gdb.arch/ppc64-atomic-inst.c: Remove.
2219         * gdb.arch/ppc64-atomic-inst.S: New file.
2220         * gdb.arch/ppc64-atomic-inst.exp: Adapt for asm based testcase.
2221
2222 2014-03-31  Doug Evans  <dje@google.com>
2223
2224         * gdb.base/print-symbol-loading-lib.c: New file.
2225         * gdb.base/print-symbol-loading-main.c: New file.
2226         * gdb.base/print-symbol-loading.exp: New file.
2227
2228 2014-03-31  Yao Qi  <yao@codesourcery.com>
2229
2230         * gdb.base/source-dir.exp: Allow ';' as a directory separator.
2231
2232 2014-03-28  Joel Brobecker  <brobecker@adacore.com>
2233
2234         * gdb.ada/mi_dyn_arr: New testcase.
2235
2236 2014-03-27  Doug Evans  <dje@google.com>
2237
2238         * gdb.dwarf2/dw2-abs-hi-pc.exp: Build tests with "nodebug".
2239
2240 2014-03-27  Yao Qi  <yao@codesourcery.com>
2241
2242         * lib/gdb.exp (can_single_step_to_signal_handler): Return zero
2243         if target is nios2-*-*.
2244
2245 2014-03-26  Yao Qi  <yao@codesourcery.com>
2246
2247         * lib/gdb.exp (readline_is_used): New proc.
2248         * gdb.base/completion.exp: Move tests on command complete up.
2249         Skip the rest of tests if readline is not used.
2250         * gdb.ada/complete.exp: Skp the test if readline is not
2251         used.
2252         * gdb.base/filesym.exp: Likewise.
2253         * gdb.base/macscp.exp: Likewise.
2254         * gdb.base/readline-ask.exp: Likewise.
2255         * gdb.base/readline.exp: Likewise.
2256         * gdb.python/py-cmd.exp: Likewise.
2257         * gdb.trace/tfile.exp: Likewise.
2258
2259 2014-03-26  Yao Qi  <yao@codesourcery.com>
2260
2261         * gdb.base/macscp.exp: Fix code format issues.
2262
2263 2014-03-25  Ulrich Weigand  <uweigand@de.ibm.com>
2264
2265         * gdb.asm/asm-source.exp: Handle powerpc64le-* targets.
2266         * gdb.asm/powerpc64le.inc: New file.
2267
2268 2014-03-25  Pedro Alves  <palves@redhat.com>
2269             Doug Evans  <dje@google.com>
2270
2271         * gdb.base/source-execution.c: New file.
2272         * gdb.base/source-execution.exp: New file.
2273         * gdb.base/source-execution.gdb: New file.
2274
2275 2014-03-24  Doug Evans  <dje@google.com>
2276
2277         * gdb.linespec/macro-relative.exp: Mark the test as unsupported if
2278         using fission.
2279
2280 2014-03-24  Hui Zhu  <hui@codesourcery.com>
2281             Pedro Alves  <palves@redhat.com>
2282
2283         PR breakpoints/16101
2284         * gdb.base/dprintf.exp: Use unsupported rather than changing the
2285         test pass/fail messages.  Detect missing support for dprintf when
2286         breakpoints are actually inserted.
2287         * gdb.base/mi-dprintf.exp: Detect missing support for dprintf when
2288         breakpoints are actually inserted.
2289         * lib/mi-support.exp (mi_run_cmd_full): Return -1 if continue
2290         fails.
2291
2292 2014-03-24  Jan Kratochvil  <jan.kratochvil@redhat.com>
2293
2294         * gdb.base/gdb-sigterm.exp (do_test): Remove "set debug lin-lwp 1".
2295
2296 2014-03-22  Doug Evans  <xdje42@gmail.com>
2297
2298         * gdb.python/python.exp (python not supported): Verify multi-line
2299         python command issues an error.
2300         * gdb.guile/guile.exp (guile not supported): Verify multi-line
2301         guile command issues an error.
2302
2303 2014-03-21  Maciej W. Rozycki  <macro@codesourcery.com>
2304
2305         * gdb.threads/thread-specific.exp: Handle the lack of usable
2306         $this_breakpoint and $this_thread.
2307
2308 2014-03-21  Hui Zhu  <hui@codesourcery.com>
2309
2310         * gdb.base/attach.exp (do_command_attach_tests): New.
2311
2312 2014-03-20  Tom Tromey  <tromey@redhat.com>
2313             Pedro Alves  <palves@redhat.com>
2314
2315         PR cli/15718
2316         * gdb.base/condbreak-call-false.c: New file.
2317         * gdb.base/condbreak-call-false.exp: New file.
2318
2319 2014-03-20  Pedro Alves  <palves@redhat.com>
2320
2321         * gdb.threads/signal-while-stepping-over-bp-other-thread.c (pid):
2322         Delete.
2323         (block_signals, unblock_signals): Delete.
2324         (child_function_2, main): Remove references to deleted variable
2325         and functions.
2326
2327 2014-03-20  Pedro Alves  <palves@redhat.com>
2328
2329         * gdb.threads/signal-while-stepping-over-bp-other-thread.c (main):
2330         Use pthread_kill to signal thread 2.
2331         * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
2332         Adjust to make the test send itself a signal rather than using the
2333         host's "kill" command.
2334
2335 2014-03-20  Pedro Alves  <palves@redhat.com>
2336
2337         * gdb.threads/multiple-step-overs.c: New file.
2338         * gdb.threads/multiple-step-overs.exp: New file.
2339         * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
2340         Adjust expected infrun debug output.
2341
2342 2014-03-20  Pedro Alves  <palves@redhat.com>
2343
2344         * gdb.threads/step-over-trips-on-watchpoint.c: New file.
2345         * gdb.threads/step-over-trips-on-watchpoint.exp: New file.
2346
2347 2014-03-20  Pedro Alves  <palves@redhat.com>
2348
2349         PR breakpoints/7143
2350         * gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
2351         old gnats gdb/38.  Remove kfail.  Adjust to use gdb_test instead
2352         of gdb_test_multiple.
2353         * gdb.cp/annota2.exp: Remove kfail for gdb/38.
2354         * gdb.cp/annota3.exp: Remove kfail for gdb/38.
2355
2356 2014-03-20  Pedro Alves  <palves@redhat.com>
2357
2358         * gdb.threads/step-over-lands-on-breakpoint.c: New file.
2359         * gdb.threads/step-over-lands-on-breakpoint.exp: New file.
2360
2361 2014-03-19  Pedro Alves  <palves@redhat.com>
2362
2363         * gdb.base/async.exp: Remove early return.
2364
2365 2014-03-19  Pedro Alves  <palves@redhat.com>
2366
2367         * gdb.base/async.exp (step& tests): Pass explicit test messages.
2368
2369 2014-03-19  Pedro Alves  <palves@redhat.com>
2370
2371         * gdb.base/async.exp (test_background): Expect \r\n after
2372         "completed." in the fail pattern.
2373
2374 2014-03-19  Pedro Alves  <palves@redhat.com>
2375
2376         * gdb.base/async.exp (test_background): New procedure.
2377         Use it for all background execution command tests.
2378
2379 2014-03-19  Pedro Alves  <palves@redhat.com>
2380
2381         * gdb.base/async.exp: Use prepare_for_testing.
2382
2383 2014-03-19  Pedro Alves  <palves@redhat.com>
2384
2385         * gdb.base/async.c (foo): Make 'x' volatile.  Write to it twice in
2386         the same line.
2387
2388 2014-03-19  Pedro Alves  <palves@redhat.com>
2389
2390         * gdb.base/async.c (main): Add "jump here" and "until here" line
2391         marker comments.
2392         * gdb.base/async.exp (jump_here): New global.
2393         (jump& test): Use it.
2394         (until_here): New global.
2395         (until& test): Use it.
2396
2397 2014-03-19  Pedro Alves  <palves@redhat.com>
2398
2399         * gdb.base/async.exp: Don't frob gdb_protocol.
2400
2401 2014-03-18  Doug Evans  <xdje42@gmail.com>
2402
2403         * gdb.base/async.exp: Whitespace fixes.  Turn on target-async.
2404         Fix spelling of exec-done-display.
2405
2406 2014-03-18  Jan Kratochvil  <jan.kratochvil@redhat.com>
2407
2408         PR gdb/15358
2409         * gdb.base/gdb-sigterm.c: New file.
2410         * gdb.base/gdb-sigterm.exp: New file.
2411
2412 2014-03-18  Pedro Alves  <palves@redhat.com>
2413
2414         PR gdb/13860
2415         * gdb.mi/mi-solib.exp: Remove gdb/13860 kfail.
2416         * lib/mi-support.exp (mi_expect_stop): Add special handling for
2417         solib-event.
2418
2419 2014-03-17  Joel Brobecker  <brobecker@adacore.com>
2420
2421         * gdb.ada/pckd_arr_ren: New testcase.
2422
2423 2014-03-13  Doug Evans  <xdje42@gmail.com>
2424
2425         PR guile/16612
2426         * gdb.guile/scm-value.ep (test_value_after_death): Do a garbage
2427         collect after discarding symbols.
2428
2429 2014-03-13  Ludovic Courtès  <ludo@gnu.org>
2430             Doug Evans  <xdje42@gmail.com>
2431
2432         * gdb.guile/scm-value.exp (test_value_in_inferior): Verify value added
2433         to history survives a gc.
2434
2435 2014-03-13  Pedro Alves  <palves@redhat.com>
2436
2437         * gdb.base/default.exp: Don't test "target procfs".
2438
2439 2014-03-13  Pedro Alves  <palves@redhat.com>
2440
2441         * gdb.base/default.exp: Update "target child" and "target procfs"
2442         tests to not expect "Unix".
2443
2444 2014-03-12  Tom Tromey  <tromey@redhat.com>
2445
2446         * gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
2447         New procs.  Add target-async tests.
2448         * gdb.reverse/break-precsave.exp (precsave_tests): New proc.
2449         Add target-async tests.
2450
2451 2014-03-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2452
2453         * gdb.dwarf2/dw2-ifort-parameter.c (func): Define labels
2454         'func_start' and 'func_end' for the beginning and end of the
2455         function code, respectively.
2456         * gdb.dwarf2/dw2-ifort-parameter.exp: Use 'func_start' and
2457         'func_end' instead of 'func' and 'main'.
2458
2459 2014-03-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2460
2461         * gdb.dwarf2/dw2-ifort-parameter-debug.S: Remove.
2462         * gdb.dwarf2/dw2-ifort-parameter.exp: Use Dwarf::assemble to
2463         generate the debug info assembler source.
2464
2465 2014-03-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2466
2467         * gdb.dwarf2/arr-stride.exp: Exploit 'prepare_for_testing'.
2468         * gdb.dwarf2/arr-subrange.exp: Likewise.
2469         * gdb.dwarf2/dwz.exp: Likewise.
2470         * gdb.dwarf2/method-ptr.exp: Likewise.
2471         * gdb.dwarf2/missing-sig-type.exp: Likewise.
2472         * gdb.dwarf2/subrange.exp: Likewise.
2473         * gdb.dwarf2/implptrconst.exp: Exploit 'build_executable'.
2474         * gdb.dwarf2/implptrpiece.exp: Likewise.
2475         * gdb.dwarf2/nostaticblock.exp: Likewise.
2476
2477 2014-03-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2478
2479         * lib/gdb.exp (build_executable_from_specs): Don't prepend source
2480         directory to absolute path name arguments.
2481
2482 2014-03-10  Joel Brobecker  <brobecker@adacore.com>
2483
2484         * gdb.ada/tagged_access: New testcase.
2485
2486 2014-03-07  Markus Metzger  <markus.t.metzger@intel.com>
2487
2488         * gdb.btrace/data.exp: Update expected output.
2489
2490 2014-03-06  Yao Qi  <yao@codesourcery.com>
2491
2492         * gdb.trace/pr16508.exp: New file.
2493
2494 2014-03-05  Pedro Alves  <palves@redhat.com>
2495
2496         PR gdb/16575
2497         * gdb.base/breakpoint-shadow.exp (compare_disassembly): New
2498         procedure.
2499         (top level): Adjust to use it.  Add tests that exercise breakpoint
2500         interaction with the code-cache.
2501
2502 2014-02-26  Ludovic Courtès  <ludo@gnu.org>
2503
2504         * gdb.guile/scm-value.exp (test_value_in_inferior): Add
2505         test for 'history-append!'.
2506
2507 2014-02-26  Joel Brobecker  <brobecker@adacore.com>
2508
2509         * gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
2510         * gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
2511         * gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
2512         * gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
2513         * gdb.dwarf2/dw2-abs-hi-pc.c: New file.
2514         * gdb.dwarf2/dw2-abs-hi-pc.exp: New file.
2515
2516 2014-02-26  Joel Brobecker  <brobecker@adacore.com>
2517
2518         * testsuite/gdb.python/py-pp-re-notag.c: New file.
2519         * testsuite/gdb.python/py-pp-re-notag.ex: New file.
2520         * testsuite/gdb.python/py-pp-re-notag.p: New file.
2521
2522 2014-02-26  Joel Brobecker  <brobecker@adacore.com>
2523
2524         * gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files.
2525
2526 2014-02-26  Joel Brobecker  <brobecker@adacore.com>
2527
2528         * gdb.dwarf2/arr-stride.c: New file.
2529         * gdb.dwarf2/arr-stride.exp: New file.
2530
2531 2014-02-26  Pedro Alves  <palves@redhat.com>
2532
2533         * gdb.ada/tasks.exp: Set a task-specific breakpoint at break_me
2534         that won't ever trigger.  Make sure that GDB reports the correct
2535         breakpoint that caused the stop.
2536
2537 2014-02-25  Jan Kratochvil  <jan.kratochvil@redhat.com>
2538
2539         PR gdb/16626
2540         * gdb.base/auto-load-script: New file.
2541         * gdb.base/auto-load.c: New file.
2542         * gdb.base/auto-load.exp: New file.
2543
2544         PR gdb/16626
2545         * gdb.base/auto-load.exp: Fix out-of-srctree run.
2546
2547 2014-02-25  Jan Kratochvil  <jan.kratochvil@redhat.com>
2548
2549         Fix dw2-icycle.exp -fsanitize=address GDB crash.
2550         * gdb.dwarf2/dw2-icycle.S: Remove all DW_AT_sibling.
2551
2552 2014-02-24  Doug Evans  <dje@google.com>
2553
2554         * lib/gdb.exp (run_on_host): Log error output if program fails.
2555
2556 2014-02-21  Pedro Alves  <palves@redhat.com>
2557
2558         * gdb.threads/step-after-sr-lock.c: Rename to ...
2559         * gdb.threads/signal-while-stepping-over-bp-other-thread.c: ... this.
2560         * gdb.threads/step-after-sr-lock.exp: Rename to ...
2561         * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
2562         ... this.
2563
2564 2014-02-20  Sergio Durigan Junior  <sergiodj@redhat.com>
2565
2566         PR tdep/16397
2567         * gdb.arch/amd64-stap-special-operands.exp: New file.
2568         * gdb.arch/amd64-stap-three-arg-disp.S: Likewise.
2569         * gdb.arch/amd64-stap-three-arg-disp.c: Likewise.
2570         * gdb.arch/amd64-stap-triplet.S: Likewise.
2571         * gdb.arch/amd64-stap-triplet.c: Likewise.
2572
2573 2014-02-20  Joel Brobecker  <brobecker@adacore.com>
2574
2575         * gdb.dwarf2/dw2-icycle.S: Remove second and third parameters
2576         in .section pseudo-op.
2577
2578 2014-02-20  lin zuojian  <manjian2006@gmail.com>
2579             Joel Brobecker  <brobecker@adacore.com>
2580             Doug Evans  <xdje42@gmail.com>
2581
2582         PR symtab/16581
2583         * gdb.dwarf2/dw2-icycle.S: New file.
2584         * gdb.dwarf2/dw2-icycle.c: New file.
2585         * gdb.dwarf2/dw2-icycle.exp: New file.
2586
2587 2014-02-19  Siva Chandra Reddy  <sivachandra@google.com>
2588
2589         * gdb.python/py-value-cc.cc: Improve test case to enable testing
2590         operations on gdb.Value objects.
2591         * gdb.python/py-value-cc.exp: Add new test to test operations on
2592         gdb.Value objects.
2593
2594 2014-02-18  Doug Evans  <dje@google.com>
2595
2596         * Makefile.in (TESTS): New variable.
2597         (expanded_tests, expanded_tests_or_none): New variables
2598         (check-single): Pass $(expanded_tests_or_none) to runtest.
2599         (check-parallel): Only run tests in $(TESTS) if non-empty.
2600         (check/no-matching-tests-found): New rule.
2601         * README: Document TESTS makefile variable.
2602
2603 2014-02-18  Doug Evans  <dje@google.com>
2604
2605         * Makefile.in (check-parallel): rm -rf outputs temp.
2606
2607 2014-02-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
2608
2609         Fix "ERROR: no fileid for" in the testsuite.
2610         * lib/gdb.exp (gdb_finish): Check gdb_spawn_id.
2611
2612 2014-02-12  Doug Evans  <dje@google.com>
2613
2614         * gdb.dwarf2/Makefile.in (EXECUTABLES): Add dwp-symlink.
2615         (MISCELLANEOUS): New variable.
2616         (clean): rm -rf $(MISCELLANEOUS).
2617         * gdb.dwarf2/dwp-symlink.exp: Test the case where the executable and
2618         dwp live in the same directory as symlinks, with each symlink pointed
2619         to a differently named file in a different directory.
2620
2621 2014-02-11  Doug Evans  <dje@google.com>
2622
2623         * gdb.dwarf2/dwp-symlink.exp: Rewrite to use remote_* commands instead
2624         of Tcl file commands.
2625
2626 2014-02-10  Mark Kettenis  <kettenis@gnu.org>
2627
2628         * gdb.threads/step-after-sr-lock.exp: Avoid executing
2629         "kill -SIGUSR1 -1".
2630
2631 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
2632
2633         * gdb.ada/tick_length_array_enum_idx: New testcase.
2634
2635 2014-02-10  Doug Evans  <xdje42@gmail.com>
2636
2637         * configure.ac (AC_OUTPUT): Add gdb.guile.
2638         * configure: Regenerate.
2639         * lib/gdb-guile.exp: New file.
2640         * lib/gdb.exp (get_target_charset): New function.
2641         * gdb.base/help.exp: Update expected output from "apropos apropos".
2642         * gdb.guile/Makefile.in: New file.
2643         * gdb.guile/guile.exp: New file.
2644         * gdb.guile/scm-arch.c: New file.
2645         * gdb.guile/scm-arch.exp: New file.
2646         * gdb.guile/scm-block.c: New file.
2647         * gdb.guile/scm-block.exp: New file.
2648         * gdb.guile/scm-breakpoint.c: New file.
2649         * gdb.guile/scm-breakpoint.exp: New file.
2650         * gdb.guile/scm-disasm.c: New file.
2651         * gdb.guile/scm-disasm.exp: New file.
2652         * gdb.guile/scm-equal.c: New file.
2653         * gdb.guile/scm-equal.exp: New file.
2654         * gdb.guile/scm-error.exp: New file.
2655         * gdb.guile/scm-error.scm: New file.
2656         * gdb.guile/scm-frame-args.c: New file.
2657         * gdb.guile/scm-frame-args.exp: New file.
2658         * gdb.guile/scm-frame-args.scm: New file.
2659         * gdb.guile/scm-frame-inline.c: New file.
2660         * gdb.guile/scm-frame-inline.exp: New file.
2661         * gdb.guile/scm-frame.c: New file.
2662         * gdb.guile/scm-frame.exp: New file.
2663         * gdb.guile/scm-generics.exp: New file.
2664         * gdb.guile/scm-gsmob.exp: New file.
2665         * gdb.guile/scm-iterator.c: New file.
2666         * gdb.guile/scm-iterator.exp: New file.
2667         * gdb.guile/scm-math.c: New file.
2668         * gdb.guile/scm-math.exp: New file.
2669         * gdb.guile/scm-objfile-script-gdb.in: New file.
2670         * gdb.guile/scm-objfile-script.c: New file.
2671         * gdb.guile/scm-objfile-script.exp: New file.
2672         * gdb.guile/scm-objfile.c: New file.
2673         * gdb.guile/scm-objfile.exp: New file.
2674         * gdb.guile/scm-ports.exp: New file.
2675         * gdb.guile/scm-pretty-print.c: New file.
2676         * gdb.guile/scm-pretty-print.exp: New file.
2677         * gdb.guile/scm-pretty-print.scm: New file.
2678         * gdb.guile/scm-section-script.c: New file.
2679         * gdb.guile/scm-section-script.exp: New file.
2680         * gdb.guile/scm-section-script.scm: New file.
2681         * gdb.guile/scm-symbol.c: New file.
2682         * gdb.guile/scm-symbol.exp: New file.
2683         * gdb.guile/scm-symtab-2.c: New file.
2684         * gdb.guile/scm-symtab.c: New file.
2685         * gdb.guile/scm-symtab.exp: New file.
2686         * gdb.guile/scm-type.c: New file.
2687         * gdb.guile/scm-type.exp: New file.
2688         * gdb.guile/scm-value-cc.cc: New file.
2689         * gdb.guile/scm-value-cc.exp: New file.
2690         * gdb.guile/scm-value.c: New file.
2691         * gdb.guile/scm-value.exp: New file.
2692         * gdb.guile/source2.scm: New file.
2693         * gdb.guile/types-module.cc: New file.
2694         * gdb.guile/types-module.exp: New file.
2695
2696 2014-02-10  Yao Qi  <yao@codesourcery.com>
2697
2698         PR testsuite/16543
2699         * configure.ac: Append gdb.gdb/Makefile in AC_OUTPUT.
2700         * configure: Regenerated.
2701         * Makefile.in: New file.
2702
2703 2014-02-08  Andreas Schwab  <schwab@linux-m68k.org>
2704
2705         * gdb.python/py-framefilter.exp: Fix typo.
2706
2707 2014-02-08  Yao Qi  <yao@codesourcery.com>
2708
2709         * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Test
2710         that no =breakpoint-modified is emitted when breakpoints are
2711         modified through MI commands.
2712
2713 2014-02-07  Pedro Alves  <pedro@codesourcery.com>
2714             Pedro Alves  <palves@redhat.com>
2715
2716         * gdb.threads/step-after-sr-lock.c: New file.
2717         * gdb.threads/step-after-sr-lock.exp: New file.
2718
2719 2014-02-07  Pedro Alves  <palves@redhat.com>
2720
2721         * gdb.threads/stepi-random-signal.exp: Set SIGCHLD to print.
2722
2723 2014-02-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
2724
2725         Fix i386-sse-stack-align.exp regression since GDB_PARALLEL.
2726         * gdb.arch/i386-sse-stack-align.exp: Use standard_output_file.
2727
2728 2014-02-06  Doug Evans  <xdje42@gmail.com>
2729
2730         * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
2731         output.
2732
2733         * gdb.gdb/python-interrupts.exp: New file.
2734
2735 2014-02-05  Yao Qi  <yao@codesourcery.com>
2736
2737         * gdb.trace/report.exp (use_collected_data): Test the output
2738         of "info threads" and "info inferiors".
2739
2740 2014-02-05  Yao Qi  <yao@codesourcery.com>
2741
2742         Revert this patch:
2743
2744         2013-05-24  Yao Qi  <yao@codesourcery.com>
2745
2746         * gdb.trace/tfile.exp: Test inferior and thread.
2747
2748 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
2749
2750         * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint
2751         on a function.
2752         * gdb.base/step-bt.c: Call hello via function pointer to make
2753         sure its first instruction is executed on powerpc64le-linux.
2754
2755 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
2756
2757         * gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
2758
2759 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
2760
2761         * gdb.arch/vsx-regs.exp: Check target endianness.  Provide variants
2762         of the test patterns for use on little-endian systems.
2763
2764 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
2765
2766         * gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test.
2767         (decimal_vector): Fix for little-endian.
2768
2769 2014-01-29  Jose E. Marchesi  <jose.marchesi@oracle.com>
2770
2771         * gdb.arch/sparc-sysstep.exp: New file.
2772         * gdb.arch/sparc-sysstep.c: Likewise.
2773
2774         * gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep.
2775
2776 2014-01-28  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
2777
2778         * gdb.base/info-shared.exp: Expect leading `.' on ppc64's symbols.
2779
2780 2014-01-23  Tom Tromey  <tromey@redhat.com>
2781
2782         * gdb.ada/array_char_idx: New testcase.
2783
2784 2014-01-23  Tom Tromey  <tromey@redhat.com>
2785
2786         PR python/16487:
2787         * gdb.python/py-framefilter.exp: Add test using "Error" filter.
2788         * gdb.python/py-framefilter.py (ErrorInName, ErrorFilter): New
2789         classes.
2790
2791 2014-01-23  Tom Tromey  <tromey@redhat.com>
2792
2793         PR python/16491:
2794         * gdb.python/py-framefilter.py (Reverse_Function.function): Read a
2795         string from an inferior frame.
2796         * gdb.python/py-framefilter-mi.exp: Update.
2797
2798 2014-01-22  Doug Evans  <dje@google.com>
2799
2800         * gdb.server/server-mon.exp: Add tests for "set debug-format".
2801
2802 2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>
2803
2804         * gdb.base/catch-syscall.exp: Activate test on s390*-linux.
2805
2806 2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>
2807
2808         * gdb.trace/entry-values.exp: Remove excess space character from
2809         regex patterns.  Handle s390 call instruction.
2810
2811 2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>
2812
2813         * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Insert alignment and
2814         define "*_start" label.  Make "name" static.
2815         * gdb.dwarf2/dw2-dir-file-name.exp: Replace references to
2816         ${name} by references to ${name}_start.
2817
2818 2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>
2819
2820         * gdb.base/info-macros.exp: Remove "debug" from the compile
2821         options.
2822
2823 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
2824
2825         * gdb.dlang/demangle.exp: New file.
2826
2827 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
2828
2829         * gdb.dlang/primitive-types.exp: New file.
2830
2831 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
2832
2833         * configure.ac: Create gdb.dlang/Makefile.
2834         * configure: Regenerate.
2835         * Makefile.in (ALL_SUBDIRS): Add gdb.dlang.
2836         * gdb.dlang/Makefile.in: New file.
2837         * lib/d-support.exp: New file.
2838         * lib/gdb.exp (skip_d_tests): New proc.
2839
2840 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2841
2842         * gdb.btrace/delta.exp: Check reverse stepi.
2843         * gdb.btrace/tailcall.exp: Update.  Add stepping tests.
2844         * gdb.btrace/finish.exp: New.
2845         * gdb.btrace/next.exp: New.
2846         * gdb.btrace/nexti.exp: New.
2847         * gdb.btrace/record_goto.c: Add comments.
2848         * gdb.btrace/step.exp: New.
2849         * gdb.btrace/stepi.exp: New.
2850         * gdb.btrace/multi-thread-step.c: New.
2851         * gdb.btrace/multi-thread-step.exp: New.
2852         * gdb.btrace/rn-dl-bind.c: New.
2853         * gdb.btrace/rn-dl-bind.exp: New.
2854         * gdb.btrace/data.c: New.
2855         * gdb.btrace/data.exp: New.
2856         * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
2857
2858 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2859
2860         * gdb.btrace/Makefile.in (EXECUTABLES): Add delta.
2861         * gdb.btrace/exception.exp: Update.
2862         * gdb.btrace/instruction_history.exp: Update.
2863         * gdb.btrace/record_goto.exp: Update.
2864         * gdb.btrace/tailcall.exp: Update.
2865         * gdb.btrace/unknown_functions.exp: Update.
2866         * gdb.btrace/delta.exp: New.
2867
2868 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2869
2870         * gdb.btrace/record_goto.exp: Add backtrace test.
2871         * gdb.btrace/tailcall.exp: Add backtrace test.
2872
2873 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2874
2875         * gdb.btrace/Makefile.in (EXECUTABLES): Add record_goto.
2876         * gdb.btrace/record_goto.c: New.
2877         * gdb.btrace/record_goto.exp: New.
2878         * gdb.btrace/x86-record_goto.S: New.
2879
2880 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2881
2882         * gdb.btrace/function_call_history.exp: Update tests.
2883         * gdb.btrace/instruction_history.exp: Update tests.
2884
2885 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2886
2887         * gdb.btrace/function_call_history.exp: Fix expected field
2888         order for "record function-call-history".
2889         Add new tests for "record function-call-history /c".
2890         * gdb.btrace/exception.cc: New.
2891         * gdb.btrace/exception.exp: New.
2892         * gdb.btrace/tailcall.exp: New.
2893         * gdb.btrace/x86-tailcall.S: New.
2894         * gdb.btrace/x86-tailcall.c: New.
2895         * gdb.btrace/unknown_functions.c: New.
2896         * gdb.btrace/unknown_functions.exp: New.
2897         * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
2898
2899 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2900
2901         * gdb.btrace/instruction_history.exp: Update.
2902         * gdb.btrace/function_call_history.exp: Update.
2903
2904 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2905
2906         * gdb.btrace/function_call_history.exp: Fix expected function
2907         trace.
2908         * gdb.btrace/instruction_history.exp: Initialize traced.
2909         Remove traced_functions.
2910
2911 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2912
2913         * gdb.btrace/function_call_history.exp: Update
2914         * gdb.btrace/instruction_history.exp: Update.
2915
2916 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2917
2918         * gdb.btrace/enable.exp: Update expected text.
2919
2920 2014-01-16  Omair Javaid  <Omair.Javaid@linaro.org>
2921
2922         * gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4
2923         bytes.
2924
2925 2014-01-15  Maciej W. Rozycki  <macro@codesourcery.com>
2926
2927         * gdb.base/float.exp: Handle "aarch64*-*-*" targets.
2928
2929 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
2930
2931         * lib/gdb.exp (supports_process_record): Return true for
2932         arm*-linux*.  (supports_reverse): Likewise.
2933
2934 2014-01-13  Siva Chandra Reddy  <sivachandra@google.com>
2935
2936         PR python/15464
2937         PR python/16113
2938         * gdb.python/py-type.c: Enhance test case.
2939         * gdb.python/py-value-cc.cc: Likewise
2940         * gdb.python/py-type.exp: Add new tests.
2941         * gdb.python/py-value-cc.exp: Likewise
2942
2943 2014-01-10  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2944             Pedro Alves <palves@redhat.com>
2945
2946         * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
2947         Make "name" extern.
2948         * gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
2949         references to ${name}_start by references to ${name}.
2950
2951 2014-01-10  Joel Brobecker  <brobecker@adacore.com>
2952
2953         * gdb.ada/pp-rec-component.exp: Remove path from "source" test.
2954
2955 2014-01-10  Joel Brobecker  <brobecker@adacore.com>
2956
2957         * gdb.python/py-pp-integral.exp: Remove path from "source" test.
2958
2959 2014-01-09  Maciej W. Rozycki  <macro@codesourcery.com>
2960             Pedro Alves  <palves@redhat.com>
2961
2962         * gdb.mi/mi-info-os.exp: Connect to the target with
2963         mi_gdb_target_load.
2964
2965 2014-01-08  Pedro Alves  <palves@redhat.com>
2966
2967         * gdb.threads/reconnect-signal.c: New file.
2968         * gdb.threads/reconnect-signal.exp: New file.
2969
2970 2014-01-07  Jan Kratochvil  <jan.kratochvil@redhat.com>
2971
2972         * gdb.base/source-dir.exp: New file.
2973
2974 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2975
2976         * gdb.ada/mi_interface: New testcase.
2977
2978 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2979
2980         * gdb.ada/pp-rec-component.exp, gdb.ada/pp-rec-component.py,
2981         gdb.ada/pp-rec-component/foo.adb, gdb.ada/pp-rec-component/pck.adb,
2982         gdb.ada/pp-rec-component/pck.ads: New files.
2983
2984 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2985
2986         * gdb.python/py-pp-integral.c: New file.
2987         * gdb.python/py-pp-integral.py: New file.
2988         * gdb.python/py-pp-integral.exp: New file.
2989
2990 For older changes see ChangeLog-1993-2013.
2991 \f
2992 ;; Local Variables:
2993 ;; mode: change-log
2994 ;; left-margin: 8
2995 ;; fill-column: 74
2996 ;; version-control: never
2997 ;; End:
2998
2999     Copyright 2014 Free Software Foundation, Inc.
3000   Copying and distribution of this file, with or without modification,
3001   are permitted provided the copyright notice and this notice are preserved.