1 # Copyright 1998, 1999 Free Software Foundation, Inc.
3 # This program is free software; you can redistribute it and/or modify
4 # it under the terms of the GNU General Public License as published by
5 # the Free Software Foundation; either version 2 of the License, or
6 # (at your option) any later version.
8 # This program is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 # GNU General Public License for more details.
13 # You should have received a copy of the GNU General Public License
14 # along with this program; if not, write to the Free Software
15 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
17 # Please email any bugs, comments, and/or additions to this file to:
18 # bug-gdb@prep.ai.mit.edu
25 set testfile1 "average"
27 set testfile "dbx-test"
28 set binfile1 ${objdir}/${subdir}/${testfile1}
29 set binfile2 ${objdir}/${subdir}/${testfile2}
30 set binfile ${objdir}/${subdir}/${testfile}
34 if { [gdb_compile "${srcdir}/${subdir}/average.c" "${binfile1}.o" object {debug}] != "" } {
35 gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
38 if { [gdb_compile "${srcdir}/${subdir}/sum.c" "${binfile2}.o" object {debug}] != "" } {
39 gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
42 if { [gdb_compile "${binfile1}.o ${binfile2}.o" ${binfile} executable {debug}] != "" } {
43 gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
47 # start gdb -- start gdb running, default procedure
49 proc dbx_gdb_start { } {
56 verbose "Spawning $GDB -nw $GDBFLAGS"
58 if { [which $GDB] == 0 } then {
59 perror "$GDB does not exist."
63 set oldtimeout $timeout
64 set timeout [expr "$timeout + 60"]
65 eval "spawn $GDB -nw -dbx $GDBFLAGS"
67 -re ".*\r\n$gdb_prompt $" {
68 verbose "GDB initialized."
71 perror "GDB never initialized."
75 perror "(timeout) GDB never initialized."
79 set timeout $oldtimeout
80 # force the height to "unlimited", so no pagers get used
81 send_gdb "set height 0\n"
84 verbose "Setting height to 0." 2
87 warning "Couldn't set the height to 0."
90 # force the width to "unlimited", so no wraparound occurs
91 send_gdb "set width 0\n"
94 verbose "Setting width to 0." 2
97 warning "Couldn't set the width to 0."
103 proc dbx_reinitialize_dir { subdir } {
108 -re "Reinitialize source path to empty.*y or n. " {
111 -re "Source directories searched.*$gdb_prompt $" {
112 send_gdb "use $subdir\n"
114 -re "Source directories searched.*$gdb_prompt $" {
115 verbose "Dir set to $subdir"
117 -re ".*$gdb_prompt $" {
118 perror "Dir \"$subdir\" failed."
122 -re ".*$gdb_prompt $" {
123 perror "Dir \"$subdir\" failed."
127 -re ".*$gdb_prompt $" {
128 perror "Dir \"$subdir\" failed."
133 # In "testsuite/config/unix-gdb.exp", the routine "gdb_load"
134 # is defined as "gdb_file_cmd". The binding of "gdb_file_cmd"
135 # is done at invocation time. Before this file is processed,
136 # it binds to the definition in "testsuite/lib/gdb.exp"; after
137 # this file is processed, it binds to this definition.
138 # TCL lets us overrides a previous routine definition without a
139 # warning (isn't that special?).
141 # This means that tests before use "file" to load a target, and
142 # tests afterwards use the pair "symbol-file" "exec-file".
144 # I'm leaving it as it is for now because at the moment it
145 # is the only test we have of the use of the combination of
146 # "symbol-file" and "exec-file" to load a debugging target (the
147 # other definition uses "file".
149 # Symbol-file and exec-file should be tested explicitly, not
150 # as a side effect of running a particular test (in this case,
151 # "testsuite/gdb.compat/dbx.exp").
153 # CM: Renamed the procedure so it does not override the orginal file name.
154 # Having the test suite change behavior depending on the tests run makes
155 # it extremely difficult to reproduce errors. I've also added a
156 # "dbx_gdb_load" procedure. This and only this test will call these
157 # procedures now. I also added an "expect" to the "send exec-file" line.
158 # The "expect" waits for a prompt to appear. Otherwise, if the tests run
159 # too quickly, the caller could send another command before the prompt
160 # of this command returns, causing the test to get out of sync and fail
161 # seemingly randomly or only on a loaded system.
163 # Problem is, though, that the testsuite config files can override the definition of
164 # gdb_load (without notice, as was mentioned above). Unfortunately, the gdb_load proc
165 # that was copied into this test was a copy of the unix native version.
167 # The real problem that we're attempting to solve is how to load an exec and symbol
168 # file into gdb for a dbx session. So why not just override gdb_file_cmd with the
169 # right sequence of events, allowing gdb_load to do its normal thing? This way
170 # remotes and simulators will work, too.
171 proc gdb_file_cmd {arg} {
178 upvar timeout timeout
180 if [is_remote host] {
181 set arg [remote_download host $arg];
183 error "download failed"
188 send_gdb "symbol-file $arg\n"
190 -re "Detected 64-bit symbol file.\r\nInvoking.*gdb64.*$gdb_prompt $" {
191 verbose "\t\tLoaded $arg into the $GDB"
192 send_gdb "exec-file $arg\n"
194 -re ".*$gdb_prompt $" {
195 verbose "\t\tLoaded $arg with new symbol table into $GDB"
199 perror "(timeout) Couldn't load $arg"
205 -re "Reading symbols from.*done.*$gdb_prompt $" {
206 verbose "\t\tLoaded $arg into the $GDB"
207 send_gdb "exec-file $arg\n"
209 -re ".*$gdb_prompt $" {
210 verbose "\t\tLoaded $arg with new symbol table into $GDB"
214 perror "(timeout) Couldn't load $arg"
220 -re "has no symbol-table.*$gdb_prompt $" {
221 perror "$arg wasn't compiled with \"-g\""
224 -re "A program is being debugged already.*Kill it.*y or n. $" {
226 verbose "\t\tKilling previous program being debugged"
229 -re "Load new symbol table from \".*\".*y or n. $" {
232 -re "Reading symbols from.*done.*$gdb_prompt $" {
233 verbose "\t\tLoaded $arg with new symbol table into $GDB"
237 perror "(timeout) Couldn't load $arg, other program already loaded."
242 -re ".*No such file or directory.*$gdb_prompt $" {
243 perror "($arg) No such file or directory\n"
246 -re "$gdb_prompt $" {
247 perror "couldn't load $arg into $GDB."
251 perror "couldn't load $arg into $GDB (timed out)."
255 # This is an attempt to detect a core dump, but seems not to
256 # work. Perhaps we need to match .* followed by eof, in which
257 # expect does not seem to have a way to do that.
258 perror "couldn't load $arg into $GDB (end of file)."
267 proc test_breakpoints { } {
268 gdb_test "stop in main" "Breakpoint.*at.*: file.*average\.c, line 38\."
269 gdb_test "status" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:38.*"
270 gdb_test "stop at 43" "Breakpoint.*at.*: file.*average\.c, line 43.*"
271 gdb_test "stop in 43" "Usage: stop in <function . address>"
272 gdb_test "stop at main" "Usage: stop at <line>"
278 proc test_assign { } {
284 -re "Break.* at .*:$decimal.*$gdb_prompt $" { pass "running to main" }
285 -re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" { pass "running to main" }
286 -re "$gdb_prompt $" { fail "running to main" }
287 timeout { fail "running to main (timeout)" }
289 send_gdb "assign first=1\n"
291 -re "No symbol \"first\" in current context.*$" { fail "assign first" }
292 "$gdb_prompt $" { pass "assign first" }
293 timeout { fail "assign first (timeout)" }
295 gdb_test "print first" ".1 = 1"
301 proc test_whereis { } {
302 gdb_test "whereis my_list" "All variables matching regular expression \"my_list\":\r\n\r\nFile.*average\.c:\r\nstatic int my_list\\\[10\\\];"
311 # This always fails, but it's not clear why. -sts 1999-08-17
313 gdb_test "func sum" "'sum' not within current stack frame\."
314 gdb_test "stop in sum" "Breakpoint.*at.*: file.*sum\.c, line 11\."
316 # This always fails, but it's not clear why. -sts 1999-08-17
318 gdb_test "func print_average" ".*in print_average.*\\(list=.*, low=0, high=6\\).*at.*average\.c:24\r\n24\[ \t\]+total = sum\\(list, low, high\\);"
321 # Start with a fresh gdb.
325 set saved_gdbflags $GDBFLAGS
327 set GDBFLAGS "$GDBFLAGS --dbx"
329 dbx_reinitialize_dir $srcdir/$subdir
335 gdb_test "file average.c:1" "1\[ \t\]+/. This is a sample program.*"
341 set GDBFLAGS $saved_gdbflags