gdb/testsuite/gdb.base/maint.exp

   1 # Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2007, 2008, 2009, 2010
   2 # Free Software Foundation, Inc.
   3
   4 # This program is free software; you can redistribute it and/or modify
   5 # it under the terms of the GNU General Public License as published by
   6 # the Free Software Foundation; either version 3 of the License, or
   7 # (at your option) any later version.
   8 #
   9 # This program is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13 #
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  16
  17 # This file was written by Elena Zannoni (ezannoni@cygnus.com)
  18
  19 # this file tests maintenance commands and help on those.
  20
  21 # source file used is break.c
  22
  23
  24 #maintenance check-symtabs -- Check consistency of psymtabs and symtabs
  25 #maintenance space -- Set the display of space usage
  26 #maintenance set -- Set GDB internal variables used by the GDB maintainer
  27 #maintenance show -- Show GDB internal variables used by the GDB maintainer
  28 #maintenance time -- Set the display of time usage
  29 #maintenance demangle -- Demangle a C++ mangled name
  30 #maintenance dump-me -- Get fatal error; make debugger dump its core
  31 #maintenance print -- Maintenance command for printing GDB internal state
  32 #maintenance info -- Commands for showing internal info about the program being debugged
  33 #maintenance internal-error -- Give GDB an internal error.
  34 #
  35 #maintenance print dummy-frames -- Print the dummy frame stack
  36 #maintenance print statistics -- Print statistics about internal gdb state
  37 #maintenance print objfiles -- Print dump of current object file definitions
  38 #maintenance print psymbols -- Print dump of current partial symbol definitions
  39 #maintenance print msymbols -- Print dump of current minimal symbol definitions
  40 #maintenance print symbols -- Print dump of current symbol definitions
  41 #maintenance print type -- Print a type chain for a given symbol
  42 #maintenance print unwind -- Print unwind table entry at given address
  43 #
  44 #
  45 #maintenance info sections -- List the BFD sections of the exec and core files
  46 #maintenance info breakpoints -- Status of all breakpoints
  47 #
  48
  49
  50
  51 if $tracelevel then {
  52         strace $tracelevel
  53         }
  54
  55 global usestubs
  56
  57 #
  58 # test running programs
  59 #
  60
  61 set testfile "break"
  62 set srcfile ${testfile}.c
  63 set srcfile1 ${testfile}1.c
  64 set binfile ${objdir}/${subdir}/${testfile}
  65
  66 if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}0.o" object {debug nowarnings}] != "" } {
  67      untested maint.exp
  68      return -1
  69 }
  70
  71 if  { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile}1.o" object {debug nowarnings}] != "" } {
  72      untested maint.exp
  73      return -1
  74 }
  75
  76 if  { [gdb_compile "${binfile}0.o ${binfile}1.o" "${binfile}" executable {debug nowarnings}] != "" } {
  77      untested maint.exp
  78      return -1
  79 }
  80
  81
  82 gdb_exit
  83 gdb_start
  84 gdb_reinitialize_dir $srcdir/$subdir
  85 gdb_load ${binfile}
  86
  87 if ![runto_main] then {
  88         perror "tests suppressed"
  89 }
  90
  91
  92 # The commands we test here produce many lines of output; disable "press
  93 # <return> to continue" prompts.
  94 gdb_test_no_output "set height 0"
  95
  96
  97 #
  98 # this command does not produce any output
  99 # unless there is some problem with the symtabs and psymtabs
 100 # so that branch will really never be covered in this tests here!!
 101 #
 102
 103 # guo: on linux this command output is huge.  for some reason splitting up
 104 # the regexp checks works.
 105 #
 106 send_gdb "maint check-symtabs\n"
 107 gdb_expect  {
 108     -re "^maint check-symtabs" {
 109         gdb_expect {
 110             -re "$gdb_prompt $" {
 111                 pass "maint check-symtabs"
 112             }
 113             timeout { fail "(timeout) maint check-symtabs" }
 114         }
 115     }
 116     -re ".*$gdb_prompt $"     { fail "maint check-symtabs" }
 117     timeout         { fail "(timeout) maint check-symtabs" }
 118 }
 119
 120 gdb_test "maint space" \
 121     "\"maintenance space\" takes a numeric argument\\."
 122
 123 gdb_test "maint space 1" \
 124     "Space used: $decimal \\(\\+$decimal for this command\\)"
 125
 126 gdb_test "maint time" \
 127     "\"maintenance time\" takes a numeric argument\\..*Space used: $decimal \\(\\+$decimal for this command\\)"
 128
 129 gdb_test "maint time 1" \
 130     "Command execution time: $decimal.*Space used: $decimal \\(\\+$decimal for this command\\)"
 131
 132 gdb_test "maint time 0" \
 133     "Space used: $decimal \\(\\+$decimal for this command\\)"
 134
 135 gdb_test_no_output "maint space 0"
 136
 137 gdb_test "maint demangle" \
 138     "\"maintenance demangle\" takes an argument to demangle\\."
 139
 140 gdb_test "maint demangle main" "Can't demangle \"main\""
 141
 142
 143
 144 # The timeout value is raised, because printing all the symbols and
 145 # statistical information about Cygwin and Windows libraries takes a lot
 146 # of time.
 147 if [istarget "*-*-cygwin*"] {
 148         set oldtimeout $timeout
 149         set timeout [expr $timeout + 500]
 150 }
 151
 152 send_gdb "maint print statistics\n"
 153 gdb_expect  {
 154     -re "Statistics for\[^\n\r\]*break\[^\n\r\]*:\r\n  Number of \"minimal\" symbols read: $decimal\r\n  Number of \"partial\" symbols read: $decimal\r\n  Number of \"full\" symbols read: $decimal\r\n  Number of \"types\" defined: $decimal\r\n  Number of psym tables \\(not yet expanded\\): $decimal\r\n  Number of symbol tables: $decimal\r\n  Number of symbol tables with line tables: $decimal\r\n  Number of symbol tables with blockvectors: $decimal\r\n  Total memory used for objfile obstack: $decimal\r\n  Total memory used for psymbol cache: $decimal\r\n  Total memory used for macro cache: $decimal\r\n  Total memory used for file name cache: $decimal\r\n" {
 155         gdb_expect {
 156             -re "$gdb_prompt $" {
 157                 pass "maint print statistics"
 158             }
 159             timeout { fail "(timeout) maint print statistics" }
 160         }
 161     }
 162     -re ".*$gdb_prompt $"     { fail "maint print statistics" }
 163     timeout         { fail "(timeout) maint print statistics" }
 164 }
 165
 166 # There aren't any ...
 167 gdb_test_no_output "maint print dummy-frames"
 168
 169 send_gdb "maint print objfiles\n"
 170
 171 # To avoid timeouts, we avoid expects with many .* patterns that match
 172 # many lines.  Instead, we keep track of which milestones we've seen
 173 # in the output, and stop when we've seen all of them.
 174
 175 set header 0
 176 set psymtabs 0
 177 set symtabs 0
 178 set keep_looking 1
 179
 180 while {$keep_looking} {
 181     gdb_expect  {
 182
 183         -re ".*Object file.*break($EXEEXT)?:  Objfile at $hex, bfd at $hex, \[0-9\]* minsyms\[\r\t \]+\n" { set header 1 }
 184         -re ".*Psymtabs:\[\r\t \]+\n" { set psymtabs 1 }
 185         -re ".*Symtabs:\[\r\t \]+\n" { set symtabs 1 }
 186
 187         -re ".*$gdb_prompt $" {
 188             set keep_looking 0
 189         }
 190         timeout {
 191             fail "(timeout) maint print objfiles"
 192             set keep_looking 0
 193         }
 194     }
 195 }
 196
 197 proc maint_pass_if {val name} {
 198     if $val { pass $name } else { fail $name }
 199 }
 200
 201 maint_pass_if $header   "maint print objfiles: header"
 202 maint_pass_if $psymtabs "maint print objfiles: psymtabs"
 203 maint_pass_if $symtabs  "maint print objfiles: symtabs"
 204
 205 gdb_test "maint print psymbols" \
 206     "print-psymbols takes an output file name and optional symbol file name" \
 207     "maint print psymbols w/o args"
 208
 209
 210
 211 send_gdb "maint print psymbols psymbols_output ${srcdir}/${subdir}/${srcfile}\n"
 212 gdb_expect  {
 213     -re "^maint print psymbols psymbols_output \[^\n\]*\r\n$gdb_prompt $" {
 214         send_gdb "shell ls psymbols_output\n"
 215         gdb_expect {
 216             -re "psymbols_output\r\n$gdb_prompt $" {
 217                 # We want this grep to be as specific as possible,
 218                 # so it's less likely to match symbol file names in
 219                 # psymbols_output.  Yes, this actually happened;
 220                 # poor expect got tons of output, and timed out
 221                 # trying to match it.   --- Jim Blandy <jimb@cygnus.com>
 222                 send_gdb "shell grep 'main.*function' psymbols_output\n"
 223                 gdb_expect {
 224                     -re ".main., function, $hex.*$gdb_prompt $" {
 225                         pass "maint print psymbols 1"
 226                     }
 227                     -re ".*main.  .., function, $hex.*$gdb_prompt $" {
 228                         pass "maint print psymbols 2"
 229                     }
 230                     -re ".*$gdb_prompt $" { fail "maint print psymbols" }
 231                     timeout     { fail "(timeout) maint print psymbols" }
 232                 }
 233                 gdb_test "shell rm -f psymbols_output" ".*"
 234             }
 235             -re ".*$gdb_prompt $"       { fail "maint print psymbols" }
 236             timeout           { fail "(timeout) maint print psymbols" }
 237         }
 238     }
 239     -re ".*$gdb_prompt $"       { fail "maint print psymbols" }
 240     timeout           { fail "(timeout) maint print psymbols" }
 241 }
 242
 243 gdb_test "maint print msymbols" \
 244     "print-msymbols takes an output file name and optional symbol file name" \
 245     "maint print msymbols w/o args"
 246
 247
 248 send_gdb "maint print msymbols msymbols_output ${binfile}\n"
 249 gdb_expect  {
 250     -re "^maint print msymbols msymbols_output \[^\n\]*\r\n$gdb_prompt $" {
 251         send_gdb "shell ls msymbols_output\n"
 252         gdb_expect {
 253             -re "msymbols_output\r\n$gdb_prompt $" {
 254                 send_gdb "shell grep factorial msymbols_output\n"
 255                 gdb_expect {
 256                     -re "\\\[ *$decimal\\\] \[tT\]\[ \t\]+$hex \\.?factorial.*$gdb_prompt $" {
 257                         pass "maint print msymbols"
 258                     }
 259                     -re ".*$gdb_prompt $"     { fail "maint print msymbols" }
 260                     timeout         { fail "(timeout) maint print msymbols" }
 261                 }
 262                 gdb_test "shell rm -f msymbols_output" ".*"
 263             }
 264             -re ".*$gdb_prompt $"     { fail "maint print msymbols" }
 265             timeout         { fail "(timeout) maint print msymbols" }
 266         }
 267     }
 268     -re ".*$gdb_prompt $"     { fail "maint print msymbols" }
 269     timeout         { fail "(timeout) maint print msymbols" }
 270 }
 271
 272 # Check that maint print msymbols allows relative pathnames
 273 set mydir [pwd]
 274 gdb_test "cd ${objdir}" \
 275     "Working directory [string_to_regexp ${objdir}]\..*" \
 276     "cd to objdir"
 277
 278 gdb_test_multiple "maint print msymbols msymbols_output2 ${subdir}/${testfile}" "maint print msymbols" {
 279     -re "^maint print msymbols msymbols_output2 \[^\n\]*\r\n$gdb_prompt $" {
 280         gdb_test_multiple "shell ls msymbols_output2" "maint print msymbols" {
 281             -re "msymbols_output2\r\n$gdb_prompt $" {
 282                 gdb_test_multiple "shell grep factorial msymbols_output2" "maint print msymbols" {
 283                     -re "\\\[ *$decimal\\\] \[tT\]\[ \t\]+$hex \\.?factorial.*$gdb_prompt $" {
 284                         pass "maint print msymbols"
 285                     }
 286                     -re ".*$gdb_prompt $" {
 287                         fail "maint print msymbols"
 288                     }
 289                     timeout {
 290                         fail "(timeout) maint print msymbols"
 291                     }
 292                 }
 293                 gdb_test "shell rm -f msymbols_output2" ".*"
 294             }
 295             -re ".*$gdb_prompt $" {
 296                 fail "maint print msymbols"
 297             }
 298             timeout {
 299                 fail "(timeout) maint print msymbols"
 300             }
 301         }
 302     }
 303     -re ".*$gdb_prompt $" {
 304         fail "maint print msymbols"
 305     }
 306     timeout {
 307         fail "(timeout) maint print msymbols"
 308     }
 309 }
 310 gdb_test "cd ${mydir}" \
 311     "Working directory [string_to_regexp ${mydir}]\..*" \
 312     "cd to mydir"
 313
 314 gdb_test "maint print symbols" \
 315     "Arguments missing: an output file name and an optional symbol file name" \
 316     "maint print symbols w/o args"
 317
 318
 319 # Request symbols for one particular source file so that we don't try to
 320 # dump the symbol information for the entire C library - over 500MB nowadays
 321 # for GNU libc.
 322
 323 send_gdb "maint print symbols symbols_output ${srcdir}/${subdir}/${srcfile}\n"
 324 gdb_expect  {
 325     -re "^maint print symbols symbols_output \[^\n\]*\r\n$gdb_prompt $" {
 326         send_gdb "shell ls symbols_output\n"
 327         gdb_expect {
 328             -re "symbols_output\r\n$gdb_prompt $" {
 329                 # See comments for `maint print psymbols'.
 330                 send_gdb "shell grep 'main(.*block' symbols_output\n"
 331                 gdb_expect {
 332                     -re "int main\\(int, char \\*\\*, char \\*\\*\\); block.*$gdb_prompt $" {
 333                         pass "maint print symbols"
 334                     }
 335                     -re ".*$gdb_prompt $"     { fail "maint print symbols" }
 336                     timeout         { fail "(timeout) maint print symbols" }
 337                 }
 338                 gdb_test "shell rm -f symbols_output" ".*"
 339             }
 340             -re ".*$gdb_prompt $"     { fail "maint print symbols" }
 341             timeout         { fail "(timeout) maint print symbols" }
 342         }
 343     }
 344     -re ".*$gdb_prompt $"     { fail "maint print symbols" }
 345     timeout         { fail "(timeout) maint print symbols" }
 346 }
 347
 348 set msg "maint print type"
 349 gdb_test_multiple "maint print type argc" $msg {
 350     -re "type node $hex\r\nname .int. \\($hex\\)\r\ntagname .<NULL>. \\($hex\\)\r\ncode $hex \\(TYPE_CODE_INT\\)\r\nlength \[24\]\r\nobjfile $hex\r\ntarget_type $hex\r\npointer_type $hex\r\nreference_type $hex\r\ntype_chain $hex\r\ninstance_flags $hex\r\nflags\r\nnfields 0 $hex\r\nvptr_basetype $hex\r\nvptr_fieldno -1\r\n$gdb_prompt $" {
 351         pass $msg
 352     }
 353 }
 354
 355 if [istarget "hppa*-*-11*"] {
 356     setup_xfail hppa*-*-*11* CLLbs14860
 357     gdb_test_multiple "maint print unwind &main" "maint print unwind" {
 358         -re ".*unwind_table_entry \\($hex\\):\r\n\tregion_start = $hex <main>\r\n\tregion_end = $hex <main\\+\[0-9\]*>\r\n\tflags = Args_stored Save_RP\r\n\tRegion_description = $hex\r\n\tEntry_FR = $hex\r\n\tEntry_GR = $hex\r\n\tTotal_frame_size = $hex\r\n$gdb_prompt $" {
 359             pass "maint print unwind"
 360         }
 361         -re ".*unwind_table_entry \\($hex\\):\r\n\tregion_start = $hex <main>\r\n\tregion_end = $hex <main\\+\[0-9\]*>\r\n\tflags = Args_stored Save_RP\r\n\tFLD = $hex\r\n\tFLD = $hex\r\n\tFLD = $hex\r\n\tFLD = $hex\r\n$gdb_prompt $" {
 362             xfail "maint print unwind"
 363         }
 364     }
 365 }
 366
 367 set oldtimeout $timeout
 368 set timeout [expr $timeout + 300]
 369
 370 # It'd be nice to check for every possible section.  However, that's
 371 # problematic, since the relative ordering wanders from release to
 372 # release of the compilers.  Instead, we'll just check for two
 373 # sections which appear to always come out in the same relative
 374 # order.  (If that changes, then we should just check for one
 375 # section.)
 376 #
 377 # And by the way: This testpoint will break for PA64, where a.out's
 378 # are ELF files.
 379
 380 # Standard GNU names.
 381 set text_section ".text"
 382 set data_section ".data"
 383
 384 gdb_test_multiple "maint info sections" "maint info sections" {
 385     -re "Exec file:\r\n.*break($EXEEXT)?., file type.*ER_RO.*$gdb_prompt $" {
 386         # Looks like RealView which uses different section names.
 387         set text_section ER_RO
 388         set data_section ER_RW
 389         pass "maint info sections"
 390     }
 391     -re "Exec file:\r\n.*break($EXEEXT)?., file type.*$gdb_prompt $" {
 392         pass "maint info sections"
 393     }
 394 }
 395
 396 # Test for new option: maint info sections <section name>
 397 # If you don't have a .text section, this will require tweaking.
 398
 399 gdb_test_multiple "maint info sections $text_section" \
 400     "maint info sections .text" {
 401         -re ".* \\.bss .*$gdb_prompt $" {
 402             fail "maint info sections .text"
 403         }
 404         -re ".* $data_section .*$gdb_prompt $" {
 405             fail "maint info sections .text"
 406         }
 407         -re ".* $text_section .*$gdb_prompt $" {
 408             pass "maint info sections .text"
 409         }
 410     }
 411
 412 # Test for new option: CODE section flag
 413 # If your data section is tagged CODE, xfail this test.
 414
 415 gdb_test_multiple "maint info sections CODE" "maint info sections CODE" {
 416     -re ".* $data_section .*$gdb_prompt $" { fail "maint info sections CODE" }
 417     -re ".* $text_section .*$gdb_prompt $" { pass "maint info sections CODE" }
 418 }
 419
 420 # Test for new option: DATA section flag
 421 # If your text section is tagged DATA, xfail this test.
 422 #
 423 # The "maint info sections DATA" test is marked for XFAIL on Cygwin,
 424 # because Windows has text sections marked DATA.
 425 setup_xfail "*-*-*cygwin*"
 426
 427 gdb_test_multiple "maint info sections DATA" "maint info sections DATA" {
 428     -re ".* $text_section .*$gdb_prompt $" { fail "maint info sections DATA" }
 429     -re ".* $data_section .*$gdb_prompt $" { pass "maint info sections DATA" }
 430     -re ".* .rodata .*$gdb_prompt $" { pass "maint info sections DATA" }
 431 }
 432
 433 set bp_location6 [gdb_get_line_number "set breakpoint 6 here"]
 434
 435 gdb_test_multiple "maint info breakpoints" "maint info breakpoints" {
 436     -re "Num\[ \t\]+Type\[ \t\]+Disp\[ \t\]+Enb\[ \t\]+Address\[ \t\]+What\r\n1\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+y\[ \t\]+$hex\[ \t\]+in main at.*break.c:$bp_location6 inf 1\r\n\[ \t\]+breakpoint already hit 1 time\r\n.*$gdb_prompt $" {
 437         pass "maint info breakpoints"
 438     }
 439     -re "Num\[ \t\]+Type\[ \t\]+Disp\[ \t\]+Enb\[ \t\]+Address\[ \t\]+What\r\n1\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+y\[ \t\]+$hex in main at.*break.c:$bp_location6 sspace 1\r\n\[ \t\]+breakpoint already hit 1 time\r\n-1\[ \t\]+shlib events\[ \t\]+keep\[ \t\]+y\[ \t\]+$hex.*breakpoint already hit.*$gdb_prompt $" {
 440         pass "maint info breakpoints (with shlib events)"
 441     }
 442 }
 443
 444 gdb_test "maint print" \
 445     "\"maintenance print\" must be followed by the name of a print command\\.\r\nList.*unambiguous\\..*" \
 446     "maint print w/o args"
 447
 448 gdb_test "maint info" \
 449     "\"maintenance info\" must be followed by the name of an info command\\.\r\nList.*unambiguous\\..*" \
 450     "maint info w/o args"
 451
 452 gdb_test "maint" \
 453     "\"maintenance\" must be followed by the name of a maintenance command\\.\r\nList.*unambiguous\\..*" \
 454     "maint w/o args"
 455
 456 set timeout $oldtimeout
 457
 458 #============test help on maint commands
 459
 460 gdb_test "help maint" \
 461     "Commands for use by GDB maintainers\\..*Includes commands to dump specific internal GDB structures in.*a human readable form, to cause GDB to deliberately dump core,.*to test internal functions such as the C../ObjC demangler, etc\\..*List of maintenance subcommands:.*maintenance check-symtabs.*maintenance demangle.*(maintenance dump-me.*)?maintenance info.*maintenance internal-error.*maintenance print.*maintenance set.*maintenance show.*maintenance space.*maintenance time.*Type.*help maintenance.*followed by maintenance subcommand name for full documentation\\..*Command name abbreviations are allowed if unambiguous\\..*"
 462
 463 gdb_test "help maint check-symtabs" \
 464     "Check consistency of psymtabs and symtabs\\..*"
 465
 466 gdb_test "help maint space" \
 467     "Set the display of space usage\\.\r\nIf nonzero, will cause the execution space for each command to be\r\ndisplayed, following the command's output\\..*"
 468
 469 gdb_test "help maint time" \
 470     "Set the display of time usage\\.\r\nIf nonzero, will cause the execution time for each command to be\r\ndisplayed, following the command's output\\..*"
 471
 472 gdb_test "help maint demangle" \
 473     "Demangle a C\\+\\+/ObjC mangled name\\.\r\nCall internal GDB demangler routine to demangle a C\\+\\+ link name\r\nand prints the result\\..*"
 474
 475 gdb_test "help maint dump-me" \
 476     "Get fatal error; make debugger dump its core\\.\r\nGDB sets its handling of SIGQUIT back to SIG_DFL and then sends\r\nitself a SIGQUIT signal\\..*"
 477
 478 gdb_test "help maint internal-error" \
 479     "Give GDB an internal error\\.\r\nCause GDB to behave as if an internal error was detected\\..*"
 480
 481 gdb_test "help maint internal-warning" \
 482     "Give GDB an internal warning\\.\r\nCause GDB to behave as if an internal warning was reported\\..*"
 483
 484 gdb_test "help maint print statistics" \
 485     "Print statistics about internal gdb state\\..*"
 486
 487 gdb_test "help maint print dummy-frames" \
 488         "Print the contents of the internal dummy-frame stack."
 489
 490 gdb_test "help maint print objfiles" \
 491     "Print dump of current object file definitions\\..*"
 492
 493 gdb_test "help maint print psymbols" \
 494     "Print dump of current partial symbol definitions\\.\r\nEntries in the partial symbol table are dumped to file OUTFILE\\.\r\nIf a SOURCE file is specified, dump only that file's partial symbols\\..*"
 495
 496 gdb_test "help maint print msymbols" \
 497     "Print dump of current minimal symbol definitions\\.\r\nEntries in the minimal symbol table are dumped to file OUTFILE\\.\r\nIf a SOURCE file is specified, dump only that file's minimal symbols\\..*"
 498
 499 gdb_test "help maint print symbols" \
 500     "Print dump of current symbol definitions\\.\r\nEntries in the full symbol table are dumped to file OUTFILE\\.\r\nIf a SOURCE file is specified, dump only that file's symbols\\..*"
 501
 502 gdb_test "help maint print type" \
 503     "Print a type chain for a given symbol\\.\r\nFor each node in a type chain, print the raw data for each member of\r\nthe type structure, and the interpretation of the data\\..*"
 504
 505 if [istarget "hppa*-*-*"] {
 506     gdb_test "help maint print unwind" \
 507         "Print unwind table entry at given address\\..*"
 508 }
 509
 510 gdb_test "help maint info sections" \
 511     "List the BFD sections of the exec and core files\\..*"
 512
 513 gdb_test "help maint info breakpoints" \
 514     "Status of all breakpoints, or breakpoint number NUMBER.*"
 515
 516
 517 #send_gdb "help maint info breakpoints\n"
 518 #expect  {
 519 #        -re "Status of all breakpoints, or breakpoint number NUMBER\\.\[ \r\n\t\]+The \"Type\" column indicates one of:\[ \r\n\t\]+breakpoint\[ \t\]+- normal breakpoint\[ \r\n\t\]+watchpoint\[ \t\]+- watchpoint\[ \r\n\t\]+longjmp\[ \t\]+- internal breakpoint used to step through longjmp\\(\\)\[ \r\n\t\]+longjmp resume - internal breakpoint at the target of longjmp\\(\\)\[ \r\n\t\]+until\[ \t\]+- internal breakpoint used by the \"until\" command\[ \r\n\t\]+finish\[ \t\]+- internal breakpoint used by the \"finish\" command\[ \r\n\t\]+The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\[ \r\n\t\]+the disposition of the breakpoint after it gets hit\\.  \"dis\" means that the\[ \r\n\t\]+breakpoint will be disabled\\.  The \"Address\" and \"What\" columns indicate the\[ \r\n\t\]+address and file.line number respectively\\.\[ \r\n\t\]+Convenience variable \".*\" and default examine address for \"x\"\[ \r\n\t\]+are set to the address of the last breakpoint listed\\.\[ \r\n\t\]+Convenience variable \".bpnum\" contains the number of the last\[ \r\n\t\]+breakpoint set\\..*$gdb_prompt $"\
 520 #                        { pass "help maint info breakpoints" }
 521 #        -re ".*$gdb_prompt $"       { fail "help maint info breakpoints" }
 522 #        timeout         { fail "(timeout) help maint info breakpoints" }
 523 #        }
 524
 525 gdb_test "help maint info" \
 526     "Commands for showing internal info about the program being debugged.*unambiguous\\..*"
 527
 528 test_prefix_command_help {"maint print" "maintenance print"} {
 529     "Maintenance command for printing GDB internal state\\.\[\r\n\]+"
 530 }
 531
 532 test_prefix_command_help {"maint" "maintenance"} {
 533     "Commands for use by GDB maintainers\\.\[\r\n\]+"
 534     "Includes commands to dump specific internal GDB structures in\[\r\n\]+"
 535     "a human readable form, to cause GDB to deliberately dump core,\[\r\n\]+"
 536     "to test internal functions such as the C\\+\\+/ObjC demangler, etc\\.\[\r\n\]+"
 537 }
 538
 539 #set oldtimeout $timeout
 540 #set timeout [expr $timeout + 300]
 541
 542 gdb_test_multiple "maint dump-me" "maint dump-me" {
 543     -re "Should GDB dump core.*\\(y or n\\) $" {
 544         gdb_test "n" ".*" "maint dump-me"
 545     }
 546 }
 547
 548 send_gdb "maint internal-error\n"
 549 gdb_expect {
 550     -re "A problem internal to GDB has been detected" {
 551         pass "maint internal-error"
 552         if [gdb_internal_error_resync] {
 553             pass "internal-error resync"
 554         } else {
 555             fail "internal-error resync"
 556         }
 557     }
 558     -re ".*$gdb_prompt $" {
 559         fail "maint internal-error"
 560         untested "internal-error resync"
 561     }
 562     timeout {
 563         fail "maint internal-error (timeout)"
 564         untested "internal-error resync"
 565     }
 566 }
 567
 568 #set timeout $oldtimeout
 569
 570
 571 gdb_exit
 572 return 0