ld/scripttempl/elf.sc

   1 #
   2 # Unusual variables checked by this code:
   3 #       NOP - four byte opcode for no-op (defaults to 0)
   4 #       NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
   5 #               empty.
   6 #       SMALL_DATA_CTOR - .ctors contains small data.
   7 #       SMALL_DATA_DTOR - .dtors contains small data.
   8 #       DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
   9 #       INITIAL_READONLY_SECTIONS - at start of text segment
  10 #       OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
  11 #               (e.g., .PARISC.milli)
  12 #       OTHER_TEXT_SECTIONS - these get put in .text when relocating
  13 #       OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
  14 #               (e.g., .PARISC.global)
  15 #       OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
  16 #               (e.g. PPC32 .fixup, .got[12])
  17 #       OTHER_BSS_SECTIONS - other than .bss .sbss ...
  18 #       ATTRS_SECTIONS - at the end
  19 #       OTHER_SECTIONS - at the end
  20 #       EXECUTABLE_SYMBOLS - symbols that must be defined for an
  21 #               executable (e.g., _DYNAMIC_LINK)
  22 #       TEXT_START_ADDR - the first byte of the text segment, after any
  23 #               headers.
  24 #       TEXT_BASE_ADDRESS - the first byte of the text segment.
  25 #       TEXT_START_SYMBOLS - symbols that appear at the start of the
  26 #               .text section.
  27 #       DATA_START_SYMBOLS - symbols that appear at the start of the
  28 #               .data section.
  29 #       DATA_END_SYMBOLS - symbols that appear at the end of the
  30 #               writeable data sections.
  31 #       OTHER_GOT_SYMBOLS - symbols defined just before .got.
  32 #       OTHER_GOT_SECTIONS - sections just after .got.
  33 #       OTHER_SDATA_SECTIONS - sections just after .sdata.
  34 #       OTHER_BSS_SYMBOLS - symbols that appear at the start of the
  35 #               .bss section besides __bss_start.
  36 #       DATA_PLT - .plt should be in data segment, not text segment.
  37 #       PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
  38 #       BSS_PLT - .plt should be in bss segment
  39 #       TEXT_DYNAMIC - .dynamic in text segment, not data segment.
  40 #       EMBEDDED - whether this is for an embedded system.
  41 #       SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
  42 #               start address of shared library.
  43 #       INPUT_FILES - INPUT command of files to always include
  44 #       WRITABLE_RODATA - if set, the .rodata section should be writable
  45 #       INIT_START, INIT_END -  statements just before and just after
  46 #       combination of .init sections.
  47 #       FINI_START, FINI_END - statements just before and just after
  48 #       combination of .fini sections.
  49 #       STACK_ADDR - start of a .stack section.
  50 #       OTHER_SYMBOLS - symbols to place right at the end of the script.
  51 #       ETEXT_NAME - name of a symbol for the end of the text section,
  52 #               normally etext.
  53 #       SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
  54 #               so that .got can be in the RELRO area.  It should be set to
  55 #               the number of bytes in the beginning of .got.plt which can be
  56 #               in the RELRO area as well.
  57 #       USER_LABEL_PREFIX - prefix to add to user-visible symbols.
  58 #
  59 # When adding sections, do note that the names of some sections are used
  60 # when specifying the start address of the next.
  61 #
  62
  63 #  Many sections come in three flavours.  There is the 'real' section,
  64 #  like ".data".  Then there are the per-procedure or per-variable
  65 #  sections, generated by -ffunction-sections and -fdata-sections in GCC,
  66 #  and useful for --gc-sections, which for a variable "foo" might be
  67 #  ".data.foo".  Then there are the linkonce sections, for which the linker
  68 #  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
  69 #  The exact correspondences are:
  70 #
  71 #  Section      Linkonce section
  72 #  .text        .gnu.linkonce.t.foo
  73 #  .rodata      .gnu.linkonce.r.foo
  74 #  .data        .gnu.linkonce.d.foo
  75 #  .bss         .gnu.linkonce.b.foo
  76 #  .sdata       .gnu.linkonce.s.foo
  77 #  .sbss        .gnu.linkonce.sb.foo
  78 #  .sdata2      .gnu.linkonce.s2.foo
  79 #  .sbss2       .gnu.linkonce.sb2.foo
  80 #  .debug_info  .gnu.linkonce.wi.foo
  81 #  .tdata       .gnu.linkonce.td.foo
  82 #  .tbss        .gnu.linkonce.tb.foo
  83 #  .lrodata     .gnu.linkonce.lr.foo
  84 #  .ldata       .gnu.linkonce.l.foo
  85 #  .lbss        .gnu.linkonce.lb.foo
  86 #
  87 #  Each of these can also have corresponding .rel.* and .rela.* sections.
  88
  89 test -z "$ENTRY" && ENTRY=_start
  90 test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
  91 test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
  92 if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
  93 test -z "${ELFSIZE}" && ELFSIZE=32
  94 test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
  95 test "$LD_FLAG" = "N" && DATA_ADDR=.
  96 test -z "${ETEXT_NAME}" && ETEXT_NAME=etext
  97 test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
  98 test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
  99 test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
 100 test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
 101 DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
 102 DATA_SEGMENT_RELRO_END=""
 103 DATA_SEGMENT_END=""
 104 if test -n "${COMMONPAGESIZE}"; then
 105   DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
 106   DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
 107   DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
 108 fi
 109 if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
 110   INITIAL_READONLY_SECTIONS=".interp       ${RELOCATING-0} : { *(.interp) }"
 111 fi
 112 if test -z "$PLT"; then
 113   PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
 114 fi
 115 test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
 116 if test -z "$GOT"; then
 117   if test -z "$SEPARATE_GOTPLT"; then
 118     GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) }"
 119   else
 120     GOT=".got          ${RELOCATING-0} : { *(.got) }"
 121     GOTPLT=".got.plt      ${RELOCATING-0} : { *(.got.plt) }"
 122   fi
 123 fi
 124 DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
 125 RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
 126 DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
 127 DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }"
 128 if test -z "${NO_SMALL_DATA}"; then
 129   SBSS=".sbss         ${RELOCATING-0} :
 130   {
 131     ${RELOCATING+${SBSS_START_SYMBOLS}}
 132     ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
 133     *(.dynsbss)
 134     *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
 135     *(.scommon)
 136     ${RELOCATING+${SBSS_END_SYMBOLS}}
 137   }"
 138   SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
 139   SDATA="/* We want the small data sections together, so single-instruction offsets
 140      can access them all, and initialized data all before uninitialized, so
 141      we can shorten the on-disk segment size.  */
 142   .sdata        ${RELOCATING-0} :
 143   {
 144     ${RELOCATING+${SDATA_START_SYMBOLS}}
 145     ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
 146     *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
 147   }"
 148   SDATA2=".sdata2       ${RELOCATING-0} :
 149   {
 150     ${RELOCATING+${SDATA2_START_SYMBOLS}}
 151     *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
 152   }"
 153   REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
 154   .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
 155   REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
 156   .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
 157   REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
 158   .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
 159   REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
 160   .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
 161 else
 162   NO_SMALL_DATA=" "
 163 fi
 164 if test -z "${DATA_GOT}"; then
 165   if test -n "${NO_SMALL_DATA}"; then
 166     DATA_GOT=" "
 167   fi
 168 fi
 169 if test -z "${SDATA_GOT}"; then
 170   if test -z "${NO_SMALL_DATA}"; then
 171     SDATA_GOT=" "
 172   fi
 173 fi
 174 test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
 175 test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
 176   .rel.ldata    ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
 177   .rela.ldata   ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
 178   .rel.lbss     ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
 179   .rela.lbss    ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
 180   .rel.lrodata  ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
 181   .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
 182 test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
 183   ${OTHER_BSS_SECTIONS}
 184   .lbss ${RELOCATING-0} :
 185   {
 186     *(.dynlbss)
 187     *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
 188     *(LARGE_COMMON)
 189   }"
 190 test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
 191   .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
 192   {
 193     *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
 194   }
 195   .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
 196   {
 197     *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
 198     ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
 199   }"
 200 CTOR=".ctors        ${CONSTRUCTING-0} :
 201   {
 202     ${CONSTRUCTING+${CTOR_START}}
 203     /* gcc uses crtbegin.o to find the start of
 204        the constructors, so we make sure it is
 205        first.  Because this is a wildcard, it
 206        doesn't matter if the user does not
 207        actually link against crtbegin.o; the
 208        linker won't look for a file to match a
 209        wildcard.  The wildcard also means that it
 210        doesn't matter which directory crtbegin.o
 211        is in.  */
 212
 213     KEEP (*crtbegin.o(.ctors))
 214     KEEP (*crtbegin?.o(.ctors))
 215
 216     /* We don't want to include the .ctor section from
 217        the crtend.o file until after the sorted ctors.
 218        The .ctor section from the crtend file contains the
 219        end of ctors marker and it must be last */
 220
 221     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
 222     KEEP (*(SORT(.ctors.*)))
 223     KEEP (*(.ctors))
 224     ${CONSTRUCTING+${CTOR_END}}
 225   }"
 226 DTOR=".dtors        ${CONSTRUCTING-0} :
 227   {
 228     ${CONSTRUCTING+${DTOR_START}}
 229     KEEP (*crtbegin.o(.dtors))
 230     KEEP (*crtbegin?.o(.dtors))
 231     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
 232     KEEP (*(SORT(.dtors.*)))
 233     KEEP (*(.dtors))
 234     ${CONSTRUCTING+${DTOR_END}}
 235   }"
 236 STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
 237   {
 238     ${RELOCATING+_stack = .;}
 239     *(.stack)
 240   }"
 241
 242 # if this is for an embedded system, don't add SIZEOF_HEADERS.
 243 if [ -z "$EMBEDDED" ]; then
 244    test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
 245 else
 246    test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
 247 fi
 248
 249 cat <<EOF
 250 OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
 251               "${LITTLE_OUTPUT_FORMAT}")
 252 OUTPUT_ARCH(${OUTPUT_ARCH})
 253 ENTRY(${ENTRY})
 254
 255 ${RELOCATING+${LIB_SEARCH_DIRS}}
 256 ${RELOCATING+${EXECUTABLE_SYMBOLS}}
 257 ${RELOCATING+${INPUT_FILES}}
 258 ${RELOCATING- /* For some reason, the Solaris linker makes bad executables
 259   if gld -r is used and the intermediate file has sections starting
 260   at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
 261   bug.  But for now assigning the zero vmas works.  */}
 262
 263 SECTIONS
 264 {
 265   /* Read-only sections, merged into text segment: */
 266   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
 267   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
 268   ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
 269   ${INITIAL_READONLY_SECTIONS}
 270   ${TEXT_DYNAMIC+${DYNAMIC}}
 271   .hash         ${RELOCATING-0} : { *(.hash) }
 272   .gnu.hash     ${RELOCATING-0} : { *(.gnu.hash) }
 273   .dynsym       ${RELOCATING-0} : { *(.dynsym) }
 274   .dynstr       ${RELOCATING-0} : { *(.dynstr) }
 275   .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
 276   .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
 277   .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
 278
 279 EOF
 280 if [ "x$COMBRELOC" = x ]; then
 281   COMBRELOCCAT=cat
 282 else
 283   COMBRELOCCAT="cat > $COMBRELOC"
 284 fi
 285 eval $COMBRELOCCAT <<EOF
 286   .rel.init     ${RELOCATING-0} : { *(.rel.init) }
 287   .rela.init    ${RELOCATING-0} : { *(.rela.init) }
 288   .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
 289   .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
 290   .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
 291   .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
 292   .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
 293   .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
 294   ${OTHER_READONLY_RELOC_SECTIONS}
 295   .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
 296   .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
 297   .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
 298   .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
 299   .rel.tdata    ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
 300   .rela.tdata   ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
 301   .rel.tbss     ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
 302   .rela.tbss    ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
 303   .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
 304   .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
 305   .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
 306   .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
 307   .rel.got      ${RELOCATING-0} : { *(.rel.got) }
 308   .rela.got     ${RELOCATING-0} : { *(.rela.got) }
 309   ${OTHER_GOT_RELOC_SECTIONS}
 310   ${REL_SDATA}
 311   ${REL_SBSS}
 312   ${REL_SDATA2}
 313   ${REL_SBSS2}
 314   .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
 315   .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
 316   ${REL_LARGE}
 317 EOF
 318 if [ -n "$COMBRELOC" ]; then
 319 cat <<EOF
 320   .rel.dyn      ${RELOCATING-0} :
 321     {
 322 EOF
 323 sed -e '/^[     ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
 324 cat <<EOF
 325     }
 326   .rela.dyn     ${RELOCATING-0} :
 327     {
 328 EOF
 329 sed -e '/^[     ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
 330 cat <<EOF
 331     }
 332 EOF
 333 fi
 334 cat <<EOF
 335   .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
 336   .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
 337   ${OTHER_PLT_RELOC_SECTIONS}
 338
 339   .init         ${RELOCATING-0} :
 340   {
 341     ${RELOCATING+${INIT_START}}
 342     KEEP (*(.init))
 343     ${RELOCATING+${INIT_END}}
 344   } =${NOP-0}
 345
 346   ${TEXT_PLT+${PLT}}
 347   ${TINY_READONLY_SECTION}
 348   .text         ${RELOCATING-0} :
 349   {
 350     ${RELOCATING+${TEXT_START_SYMBOLS}}
 351     *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
 352     KEEP (*(.text.*personality*))
 353     /* .gnu.warning sections are handled specially by elf32.em.  */
 354     *(.gnu.warning)
 355     ${RELOCATING+${OTHER_TEXT_SECTIONS}}
 356   } =${NOP-0}
 357   .fini         ${RELOCATING-0} :
 358   {
 359     ${RELOCATING+${FINI_START}}
 360     KEEP (*(.fini))
 361     ${RELOCATING+${FINI_END}}
 362   } =${NOP-0}
 363   ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);}
 364   ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
 365   ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
 366   ${WRITABLE_RODATA-${RODATA}}
 367   .rodata1      ${RELOCATING-0} : { *(.rodata1) }
 368   ${CREATE_SHLIB-${SDATA2}}
 369   ${CREATE_SHLIB-${SBSS2}}
 370   ${OTHER_READONLY_SECTIONS}
 371   .eh_frame_hdr : { *(.eh_frame_hdr) }
 372   .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
 373   .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
 374
 375   /* Adjust the address for the data segment.  We want to adjust up to
 376      the same address within the page on the next page up.  */
 377   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
 378   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
 379   ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
 380
 381   /* Exception handling  */
 382   .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
 383   .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
 384
 385   /* Thread Local Storage sections  */
 386   .tdata        ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
 387   .tbss         ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
 388
 389   .preinit_array   ${RELOCATING-0} :
 390   {
 391     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
 392     KEEP (*(.preinit_array))
 393     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
 394   }
 395   .init_array   ${RELOCATING-0} :
 396   {
 397      ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
 398      KEEP (*(SORT(.init_array.*)))
 399      KEEP (*(.init_array))
 400      ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
 401   }
 402   .fini_array   ${RELOCATING-0} :
 403   {
 404     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
 405     KEEP (*(.fini_array))
 406     KEEP (*(SORT(.fini_array.*)))
 407     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}}
 408   }
 409   ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
 410   ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
 411   .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
 412
 413   ${RELOCATING+${DATARELRO}}
 414   ${OTHER_RELRO_SECTIONS}
 415   ${TEXT_DYNAMIC-${DYNAMIC}}
 416   ${DATA_GOT+${RELRO_NOW+${GOT}}}
 417   ${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
 418   ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
 419   ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
 420   ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
 421   ${DATA_GOT+${RELRO_NOW-${GOTPLT}}}
 422
 423   ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
 424
 425   .data         ${RELOCATING-0} :
 426   {
 427     ${RELOCATING+${DATA_START_SYMBOLS}}
 428     *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
 429     ${RELOCATING+KEEP (*(.gnu.linkonce.d.*personality*))}
 430     ${CONSTRUCTING+SORT(CONSTRUCTORS)}
 431   }
 432   .data1        ${RELOCATING-0} : { *(.data1) }
 433   ${WRITABLE_RODATA+${RODATA}}
 434   ${OTHER_READWRITE_SECTIONS}
 435   ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
 436   ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
 437   ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
 438   ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}}
 439   ${SDATA_GOT+${GOT}}
 440   ${SDATA_GOT+${OTHER_GOT_SECTIONS}}
 441   ${SDATA}
 442   ${OTHER_SDATA_SECTIONS}
 443   ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
 444   ${RELOCATING+__bss_start = .;}
 445   ${RELOCATING+${OTHER_BSS_SYMBOLS}}
 446   ${SBSS}
 447   ${BSS_PLT+${PLT}}
 448   .bss          ${RELOCATING-0} :
 449   {
 450    *(.dynbss)
 451    *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
 452    *(COMMON)
 453    /* Align here to ensure that the .bss section occupies space up to
 454       _end.  Align after .bss to ensure correct alignment even if the
 455       .bss section disappears because there are no input sections.
 456       FIXME: Why do we need it? When there is no .bss section, we don't
 457       pad the .data section.  */
 458    ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
 459   }
 460   ${OTHER_BSS_SECTIONS}
 461   ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
 462   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
 463   ${LARGE_SECTIONS}
 464   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
 465   ${RELOCATING+${OTHER_END_SYMBOLS}}
 466   ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
 467   ${RELOCATING+${DATA_SEGMENT_END}}
 468
 469   /* Stabs debugging sections.  */
 470   .stab          0 : { *(.stab) }
 471   .stabstr       0 : { *(.stabstr) }
 472   .stab.excl     0 : { *(.stab.excl) }
 473   .stab.exclstr  0 : { *(.stab.exclstr) }
 474   .stab.index    0 : { *(.stab.index) }
 475   .stab.indexstr 0 : { *(.stab.indexstr) }
 476
 477   .comment       0 : { *(.comment) }
 478
 479   /* DWARF debug sections.
 480      Symbols in the DWARF debugging sections are relative to the beginning
 481      of the section so we begin them at 0.  */
 482
 483   /* DWARF 1 */
 484   .debug          0 : { *(.debug) }
 485   .line           0 : { *(.line) }
 486
 487   /* GNU DWARF 1 extensions */
 488   .debug_srcinfo  0 : { *(.debug_srcinfo) }
 489   .debug_sfnames  0 : { *(.debug_sfnames) }
 490
 491   /* DWARF 1.1 and DWARF 2 */
 492   .debug_aranges  0 : { *(.debug_aranges) }
 493   .debug_pubnames 0 : { *(.debug_pubnames) }
 494
 495   /* DWARF 2 */
 496   .debug_info     0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) }
 497   .debug_abbrev   0 : { *(.debug_abbrev) }
 498   .debug_line     0 : { *(.debug_line) }
 499   .debug_frame    0 : { *(.debug_frame) }
 500   .debug_str      0 : { *(.debug_str) }
 501   .debug_loc      0 : { *(.debug_loc) }
 502   .debug_macinfo  0 : { *(.debug_macinfo) }
 503
 504   /* SGI/MIPS DWARF 2 extensions */
 505   .debug_weaknames 0 : { *(.debug_weaknames) }
 506   .debug_funcnames 0 : { *(.debug_funcnames) }
 507   .debug_typenames 0 : { *(.debug_typenames) }
 508   .debug_varnames  0 : { *(.debug_varnames) }
 509
 510   /* DWARF 3 */
 511   .debug_pubtypes 0 : { *(.debug_pubtypes) }
 512   .debug_ranges   0 : { *(.debug_ranges) }
 513
 514   ${TINY_DATA_SECTION}
 515   ${TINY_BSS_SECTION}
 516
 517   ${STACK_ADDR+${STACK}}
 518   ${ATTRS_SECTIONS}
 519   ${OTHER_SECTIONS}
 520   ${RELOCATING+${OTHER_SYMBOLS}}
 521   ${RELOCATING+${DISCARDED}}
 522 }
 523 EOF