1 # Support routines for LD testsuite.
2 # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
3 # Free Software Foundation, Inc.
5 # This file is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 # extract and print the version number of ld
23 proc default_ld_version { ld } {
26 if { [which $ld] == 0 } then {
27 perror "$ld does not exist"
31 catch "exec $ld --version" tmp
32 set tmp [prune_warnings $tmp]
33 regexp "\[^\n\]* (cygnus-|)(\[-0-9.a-zA-Z-\]+)\[\r\n\].*" $tmp version cyg number
34 if [info exists number] then {
35 clone_output "$ld $number\n"
41 # link an object using relocation
43 proc default_ld_relocate { ld target objects } {
47 if { [which $ld] == 0 } then {
48 perror "$ld does not exist"
52 verbose -log "$ld $HOSTING_EMU -o $target -r $objects"
54 catch "exec $ld $HOSTING_EMU -o $target -r $objects" exec_output
55 set exec_output [prune_warnings $exec_output]
56 if [string match "" $exec_output] then {
59 verbose -log "$exec_output"
64 # Check to see if ld is being invoked with a non-endian output format
66 proc is_endian_output_format { object_flags } {
68 if {[string match "*-oformat binary*" $object_flags] || \
69 [string match "*-oformat ieee*" $object_flags] || \
70 [string match "*-oformat ihex*" $object_flags] || \
71 [string match "*-oformat netbsd-core*" $object_flags] || \
72 [string match "*-oformat srec*" $object_flags] || \
73 [string match "*-oformat tekhex*" $object_flags] || \
74 [string match "*-oformat trad-core*" $object_flags] } then {
81 # Look for big-endian or little-endian switches in the multlib
82 # options and translate these into a -EB or -EL switch. Note
83 # we cannot rely upon proc process_multilib_options to do this
84 # for us because for some targets the compiler does not support
85 # -EB/-EL but it does support -mbig-endian/-mlittle-endian, and
86 # the site.exp file will include the switch "-mbig-endian"
87 # (rather than "big-endian") which is not detected by proc
88 # process_multilib_options.
90 proc big_or_little_endian {} {
92 if [board_info [target_info name] exists multilib_flags] {
93 set tmp_flags " [board_info [target_info name] multilib_flags]";
95 foreach x $tmp_flags {
97 {*big*endian eb EB -eb -EB -mb} {
101 {*little*endian el EL -el -EL -ml} {
115 # link a program using ld
117 proc default_ld_link { ld target objects } {
125 set objs "$HOSTING_CRT0 $objects"
126 set libs "$LIBS $HOSTING_LIBS"
128 if { [which $ld] == 0 } then {
129 perror "$ld does not exist"
133 if [is_endian_output_format $objects] then {
134 set flags [big_or_little_endian]
138 verbose -log "$ld $HOSTING_EMU $flags -o $target $objs $libs"
140 catch "exec $ld $HOSTING_EMU $flags -o $target $objs $libs" link_output
141 set exec_output [prune_warnings $link_output]
142 if [string match "" $link_output] then {
145 verbose -log "$link_output"
151 # default_ld_simple_link
152 # link a program using ld, without including any libraries
154 proc default_ld_simple_link { ld target objects } {
159 if { [which $ld] == 0 } then {
160 perror "$ld does not exist"
164 if [is_endian_output_format $objects] then {
165 set flags [big_or_little_endian]
170 # If we are compiling with gcc, we want to add gcc_ld_flag to
171 # flags. Rather than determine this in some complex way, we guess
172 # based on the name of the compiler.
174 set ldparm [string first " " $ld]
175 if { $ldparm > 0 } then {
176 set ldexe [string range $ld 0 $ldparm]
178 set ldexe [string replace $ldexe 0 [string last "/" $ldexe] ""]
179 if {[string match "*gcc*" $ldexe] || [string match "*++*" $ldexe]} then {
180 set flags "$gcc_ld_flag $flags"
183 verbose -log "$ld $flags -o $target $objects"
185 catch "exec $ld $flags -o $target $objects" link_output
186 set exec_output [prune_warnings $link_output]
188 # We don't care if we get a warning about a non-existent start
189 # symbol, since the default linker script might use ENTRY.
190 regsub -all "(^|\n)(\[^\n\]*: warning: cannot find entry symbol\[^\n\]*\n?)" $exec_output "\\1" exec_output
192 if [string match "" $exec_output] then {
195 verbose -log "$exec_output"
202 # compile an object using cc
204 proc default_ld_compile { cc source object } {
212 if {[llength $cc_prog] > 1} then {
213 set cc_prog [lindex $cc_prog 0]
215 if {[which $cc_prog] == 0} then {
216 perror "$cc_prog does not exist"
220 catch "exec rm -f $object" exec_output
222 set flags "-I$srcdir/$subdir $CFLAGS"
224 # If we are compiling with gcc, we want to add gcc_gas_flag to
225 # flags. Rather than determine this in some complex way, we guess
226 # based on the name of the compiler.
228 set ccparm [string first " " $cc]
229 if { $ccparm > 0 } then {
230 set ccexe [string range $cc 0 $ccparm]
232 set ccexe [string replace $ccexe 0 [string last "/" $ccexe] ""]
233 if {[string match "*gcc*" $ccexe] || [string match "*++*" $ccexe]} then {
234 set flags "$gcc_gas_flag $flags"
237 if [board_info [target_info name] exists multilib_flags] {
238 append flags " [board_info [target_info name] multilib_flags]";
241 verbose -log "$cc $flags -c $source -o $object"
243 catch "exec $cc $flags -c $source -o $object" exec_output
244 set exec_output [prune_warnings $exec_output]
245 if [string match "" $exec_output] then {
246 if {![file exists $object]} then {
247 regexp ".*/(\[^/\]*)$" $source all dobj
248 regsub "\\.c" $dobj ".o" realobj
249 verbose "looking for $realobj"
250 if {[file exists $realobj]} then {
251 verbose -log "mv $realobj $object"
252 catch "exec mv $realobj $object" exec_output
253 set exec_output [prune_warnings $exec_output]
254 if {![string match "" $exec_output]} then {
255 verbose -log "$exec_output"
256 perror "could not move $realobj to $object"
260 perror "$object not found after compilation"
266 verbose -log "$exec_output"
267 perror "$source: compilation failed"
273 # default_ld_assemble
276 proc default_ld_assemble { as source object } {
280 if {[which $as] == 0} then {
281 perror "$as does not exist"
285 if ![info exists ASFLAGS] { set ASFLAGS "" }
287 set flags [big_or_little_endian]
289 verbose -log "$as $flags $ASFLAGS -o $object $source"
291 catch "exec $as $flags $ASFLAGS -o $object $source" exec_output
292 set exec_output [prune_warnings $exec_output]
293 if [string match "" $exec_output] then {
296 verbose -log "$exec_output"
297 perror "$source: assembly failed"
304 # run nm on a file, putting the result in the array nm_output
306 proc default_ld_nm { nm nmflags object } {
311 if {[which $nm] == 0} then {
312 perror "$nm does not exist"
316 if {[info exists nm_output]} {
320 if ![info exists NMFLAGS] { set NMFLAGS "" }
322 # Ensure consistent sorting of symbols
323 if {[info exists env(LC_ALL)]} {
324 set old_lc_all $env(LC_ALL)
327 verbose -log "$nm $NMFLAGS $nmflags $object >tmpdir/nm.out"
329 catch "exec $nm $NMFLAGS $nmflags $object >tmpdir/nm.out" exec_output
330 if {[info exists old_lc_all]} {
331 set env(LC_ALL) $old_lc_all
335 set exec_output [prune_warnings $exec_output]
336 if [string match "" $exec_output] then {
337 set file [open tmpdir/nm.out r]
338 while { [gets $file line] != -1 } {
340 if [regexp "^(\[0-9a-fA-F\]+) \[a-zA-Z0-9\] \\.*(.+)$" $line whole value name] {
341 set name [string trimleft $name "_"]
342 verbose "Setting nm_output($name) to 0x$value" 2
343 set nm_output($name) 0x$value
349 verbose -log "$exec_output"
350 perror "$object: nm failed"
357 # true if the object format is known to be ELF
359 proc is_elf_format {} {
360 if { ![istarget *-*-sysv4*] \
361 && ![istarget *-*-unixware*] \
362 && ![istarget *-*-elf*] \
363 && ![istarget *-*-eabi*] \
364 && ![istarget hppa*64*-*-hpux*] \
365 && ![istarget *-*-linux*] \
366 && ![istarget *-*-irix5*] \
367 && ![istarget *-*-irix6*] \
368 && ![istarget *-*-netbsd*] \
369 && ![istarget *-*-solaris2*] } {
373 if { [istarget *-*-linux*aout*] \
374 || [istarget *-*-linux*oldld*] } {
378 if { ![istarget *-*-netbsdelf*] \
379 && ([istarget *-*-netbsd*aout*] \
380 || [istarget *-*-netbsdpe*] \
381 || [istarget arm*-*-netbsd*] \
382 || [istarget sparc-*-netbsd*] \
383 || [istarget i*86-*-netbsd*] \
384 || [istarget m68*-*-netbsd*] \
385 || [istarget vax-*-netbsd*] \
386 || [istarget ns32k-*-netbsd*]) } {
394 # compares two files line-by-line
395 # returns differences if exist
396 # returns null if file(s) cannot be opened
398 proc simple_diff { file_1 file_2 } {
404 if [file exists $file_1] then {
405 set file_a [open $file_1 r]
407 warning "$file_1 doesn't exist"
411 if [file exists $file_2] then {
412 set file_b [open $file_2 r]
414 fail "$file_2 doesn't exist"
418 verbose "# Diff'ing: $file_1 $file_2\n" 2
420 while { [gets $file_a line] != $eof } {
421 if [regexp "^#.*$" $line] then {
429 while { [gets $file_b line] != $eof } {
430 if [regexp "^#.*$" $line] then {
438 for { set i 0 } { $i < [llength $list_a] } { incr i } {
439 set line_a [lindex $list_a $i]
440 set line_b [lindex $list_b $i]
442 verbose "\t$file_1: $i: $line_a\n" 3
443 verbose "\t$file_2: $i: $line_b\n" 3
444 if [string compare $line_a $line_b] then {
445 verbose -log "\t$file_1: $i: $line_a\n"
446 verbose -log "\t$file_2: $i: $line_b\n"
453 if { [llength $list_a] != [llength $list_b] } {
458 if $differences<1 then {
464 # Copied from gas testsuite, tweaked and further extended.
466 # Assemble a .s file, then run some utility on it and check the output.
468 # There should be an assembly language file named FILE.s in the test
469 # suite directory, and a pattern file called FILE.d. `run_dump_test'
470 # will assemble FILE.s, run some tool like `objdump', `objcopy', or
471 # `nm' on the .o file to produce textual output, and then analyze that
472 # with regexps. The FILE.d file specifies what program to run, and
473 # what to expect in its output.
475 # The FILE.d file begins with zero or more option lines, which specify
476 # flags to pass to the assembler, the program to run to dump the
477 # assembler's output, and the options it wants. The option lines have
482 # OPTION is the name of some option, like "name" or "objdump", and
483 # VALUE is OPTION's value. The valid options are described below.
484 # Whitespace is ignored everywhere, except within VALUE. The option
485 # list ends with the first line that doesn't match the above syntax
486 # (hmm, not great for error detection).
488 # The interesting options are:
491 # The name of this test, passed to DejaGNU's `pass' and `fail'
492 # commands. If omitted, this defaults to FILE, the root of the
493 # .s and .d files' names.
496 # When assembling, pass FLAGS to the assembler.
497 # If assembling several files, you can pass different assembler
498 # options in the "source" directives. See below.
501 # Link assembled files using FLAGS, in the order of the "source"
502 # directives, when using multiple files.
504 # objcopy_linked_file: FLAGS
505 # Run objcopy on the linked file with the specified flags.
506 # This lets you transform the linked file using objcopy, before the
507 # result is analyzed by an analyzer program specified below (which
508 # may in turn *also* be objcopy).
511 # The name of the program to run to analyze the .o file produced
512 # by the assembler or the linker output. This can be omitted;
513 # run_dump_test will guess which program to run by seeing which of
514 # the flags options below is present.
519 # Use the specified program to analyze the assembler or linker
520 # output file, and pass it FLAGS, in addition to the output name.
521 # Note that they are run with LC_ALL=C in the environment to give
522 # consistent sorting of symbols.
524 # source: SOURCE [FLAGS]
525 # Assemble the file SOURCE.s using the flags in the "as" directive
526 # and the (optional) FLAGS. If omitted, the source defaults to
528 # This is useful if several .d files want to share a .s file.
529 # More than one "source" directive can be given, which is useful
530 # when testing linking.
533 # The test is expected to fail on TARGET. This may occur more than
537 # Only run the test for TARGET. This may occur more than once; the
538 # target being tested must match at least one.
541 # Do not run the test for TARGET. This may occur more than once;
542 # the target being tested must not match any of them.
545 # An error with message matching REGEX must be emitted for the test
546 # to pass. The PROG, objdump, nm and objcopy options have no
547 # meaning and need not supplied if this is present.
549 # Each option may occur at most once unless otherwise mentioned.
551 # After the option lines come regexp lines. `run_dump_test' calls
552 # `regexp_diff' to compare the output of the dumping tool against the
553 # regexps in FILE.d. `regexp_diff' is defined later in this file; see
554 # further comments there.
556 proc run_dump_test { name } {
558 global OBJDUMP NM AS OBJCOPY READELF LD
559 global OBJDUMPFLAGS NMFLAGS ASFLAGS OBJCOPYFLAGS READELFFLAGS LDFLAGS
560 global host_triplet runtests
563 if [string match "*/*" $name] {
565 set name [file tail $name]
567 set file "$srcdir/$subdir/$name"
570 if ![runtest_file_p $runtests $name] then {
574 set opt_array [slurp_options "${file}.d"]
575 if { $opt_array == -1 } {
576 perror "error reading options from $file.d"
577 unresolved $subdir/$name
580 set dumpfile tmpdir/dump.out
587 set opts(notarget) {}
596 set opts(objcopy_linked_file) {}
597 set asflags(${file}.s) {}
599 foreach i $opt_array {
600 set opt_name [lindex $i 0]
601 set opt_val [lindex $i 1]
602 if ![info exists opts($opt_name)] {
603 perror "unknown option $opt_name in file $file.d"
604 unresolved $subdir/$name
608 switch -- $opt_name {
613 # Move any source-specific as-flags to a separate array to
614 # simplify processing.
615 if { [llength $opt_val] > 1 } {
616 set asflags([lindex $opt_val 0]) [lrange $opt_val 1 end]
617 set opt_val [lindex $opt_val 0]
619 set asflags($opt_val) {}
623 if [string length $opts($opt_name)] {
624 perror "option $opt_name multiply set in $file.d"
625 unresolved $subdir/$name
629 # A single "# ld:" with no options should do the right thing.
630 if { $opt_name == "ld" } {
633 # Likewise objcopy_linked_file.
634 if { $opt_name == "objcopy_linked_file" } {
639 set opts($opt_name) [concat $opts($opt_name) $opt_val]
642 # Decide early whether we should run the test for this target.
643 if { [llength $opts(target)] > 0 } {
645 foreach targ $opts(target) {
646 if [istarget $targ] {
651 if { $targmatch == 0 } {
655 foreach targ $opts(notarget) {
656 if [istarget $targ] {
661 if {$opts(PROG) != ""} {
662 switch -- $opts(PROG) {
664 { set program objdump }
668 { set program objcopy }
670 { set program readelf }
672 { perror "unrecognized program option $opts(PROG) in $file.d"
673 unresolved $subdir/$name
676 } elseif { $opts(error) != "" } {
677 # It's meaningless to require an output-testing method when we
678 # expect an error. For simplicity, we fake an arbitrary method.
681 # Guess which program to run, by seeing which option was specified.
683 foreach p {objdump objcopy nm readelf} {
684 if {$opts($p) != ""} {
685 if {$program != ""} {
686 perror "ambiguous dump program in $file.d"
687 unresolved $subdir/$name
694 if {$program == ""} {
695 perror "dump program unspecified in $file.d"
696 unresolved $subdir/$name
701 set progopts1 $opts($program)
702 eval set progopts \$[string toupper $program]FLAGS
703 eval set binary \$[string toupper $program]
704 if { $opts(name) == "" } {
705 set testname "$subdir/$name"
707 set testname $opts(name)
710 if { $opts(source) == "" } {
711 set sourcefiles [list ${file}.s]
714 foreach sf $opts(source) {
715 if { [string match "/*" $sf] } {
716 lappend sourcefiles "$sf"
718 lappend sourcefiles "$srcdir/$subdir/$sf"
720 # Must have asflags indexed on source name.
721 set asflags($srcdir/$subdir/$sf) $asflags($sf)
725 # Time to setup xfailures.
726 foreach targ $opts(xfail) {
730 # Assemble each file.
732 for { set i 0 } { $i < [llength $sourcefiles] } { incr i } {
733 set sourcefile [lindex $sourcefiles $i]
735 set objfile "tmpdir/dump$i.o"
736 lappend objfiles $objfile
737 set cmd "$AS $ASFLAGS $opts(as) $asflags($sourcefile) -o $objfile $sourcefile"
740 set cmdret [catch "exec $cmd" comp_output]
741 set comp_output [prune_warnings $comp_output]
743 # We accept errors at assembly stage too, unless we're supposed to
745 if { $cmdret != 0 || ![string match "" $comp_output] } then {
746 send_log "$comp_output\n"
747 verbose "$comp_output" 3
748 if { $opts(error) != "" && $run_ld == 0 } {
749 if [regexp $opts(error) $comp_output] {
759 # Perhaps link the file(s).
761 set objfile "tmpdir/dump"
763 # Add -L$srcdir/$subdir so that the linker command can use
764 # linker scripts in the source directory.
765 set cmd "$LD $LDFLAGS -L$srcdir/$subdir \
766 $opts(ld) -o $objfile $objfiles"
769 set cmdret [catch "exec $cmd" comp_output]
770 set comp_output [prune_warnings $comp_output]
772 if { $cmdret != 0 || ![string match "" $comp_output] } then {
773 verbose -log "failed with: <$comp_output>, expected: <$opts(error)>"
774 send_log "$comp_output\n"
775 verbose "$comp_output" 3
776 if { $opts(error) != "" && $run_objcopy == 0 } {
777 if [regexp $opts(error) $comp_output] {
786 if { $run_objcopy } {
788 set objfile "tmpdir/dump1"
790 # Note that we don't use OBJCOPYFLAGS here; any flags must be
791 # explicitly specified.
792 set cmd "$OBJCOPY $opts(objcopy_linked_file) $infile $objfile"
795 set cmdret [catch "exec $cmd" comp_output]
796 set comp_output [prune_warnings $comp_output]
798 if { $cmdret != 0 || ![string match "" $comp_output] } then {
799 verbose -log "failed with: <$comp_output>, expected: <$opts(error)>"
800 send_log "$comp_output\n"
801 verbose "$comp_output" 3
802 if { $opts(error) != "" } {
803 if [regexp $opts(error) $comp_output] {
813 set objfile "tmpdir/dump0.o"
816 # We must not have expected failure if we get here.
817 if { $opts(error) != "" } {
822 if { [which $binary] == 0 } {
827 if { $progopts1 == "" } { set $progopts1 "-r" }
828 verbose "running $binary $progopts $progopts1" 3
830 # Objcopy, unlike the other two, won't send its output to stdout,
831 # so we have to run it specially.
832 set cmd "$binary $progopts $progopts1 $objfile > $dumpfile"
833 if { $program == "objcopy" } {
834 set cmd "$binary $progopts $progopts1 $objfile $dumpfile"
837 # Ensure consistent sorting of symbols
838 if {[info exists env(LC_ALL)]} {
839 set old_lc_all $env(LC_ALL)
843 catch "exec $cmd" comp_output
844 if {[info exists old_lc_all]} {
845 set env(LC_ALL) $old_lc_all
849 set comp_output [prune_warnings $comp_output]
850 if ![string match "" $comp_output] then {
851 send_log "$comp_output\n"
856 verbose_eval {[file_contents $dumpfile]} 3
857 if { [regexp_diff $dumpfile "${file}.d"] } then {
859 verbose "output is [file_contents $dumpfile]" 2
866 proc slurp_options { file } {
867 if [catch { set f [open $file r] } x] {
868 #perror "couldn't open `$file': $x"
873 # whitespace expression
876 # whitespace is ignored anywhere except within the options list;
877 # option names are alphabetic plus underscore only.
878 set pat "^#${ws}(\[a-zA-Z_\]*)$ws:${ws}(.*)$ws\$"
879 while { [gets $f line] != -1 } {
880 set line [string trim $line]
881 # Whitespace here is space-tab.
882 if [regexp $pat $line xxx opt_name opt_val] {
884 lappend opt_array [list $opt_name $opt_val]
893 # regexp_diff, copied from gas, based on simple_diff above.
894 # compares two files line-by-line
895 # file1 contains strings, file2 contains regexps and #-comments
896 # blank lines are ignored in either file
897 # returns non-zero if differences exist
899 proc regexp_diff { file_1 file_2 } {
907 if [file exists $file_1] then {
908 set file_a [open $file_1 r]
910 warning "$file_1 doesn't exist"
914 if [file exists $file_2] then {
915 set file_b [open $file_2 r]
917 fail "$file_2 doesn't exist"
922 verbose " Regexp-diff'ing: $file_1 $file_2" 2
927 while { [string length $line_a] == 0 } {
928 if { [gets $file_a line_a] == $eof } {
933 while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
934 if [ string match "#pass" $line_b ] {
938 } elseif [ string match "#..." $line_b ] {
939 if { [gets $file_b line_b] == $eof } {
943 verbose "looking for \"^$line_b$\"" 3
944 while { ![regexp "^$line_b$" "$line_a"] } {
945 verbose "skipping \"$line_a\"" 3
946 if { [gets $file_a line_a] == $eof } {
953 if { [gets $file_b line_b] == $eof } {
961 } elseif { $end_1 && $end_2 } {
963 } elseif { $end_1 } {
964 send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
965 verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
968 } elseif { $end_2 } {
969 send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
970 verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
974 verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
975 if ![regexp "^$line_b$" "$line_a"] {
976 send_log "regexp_diff match failure\n"
977 send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
983 if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
984 send_log "$file_1 and $file_2 are different lengths\n"
985 verbose "$file_1 and $file_2 are different lengths" 3
995 proc file_contents { filename } {
996 set file [open $filename r]
997 set contents [read $file]
1002 # List contains test-items with 3 items followed by 2 lists, one item and
1003 # one optional item:
1004 # 0:name 1:ld options 2:assembler options
1005 # 3:filenames of assembler files 4: action and options. 5: name of output file
1006 # 6:compiler flags (optional)
1009 # objdump: Apply objdump options on result. Compare with regex (last arg).
1010 # nm: Apply nm options on result. Compare with regex (last arg).
1011 # readelf: Apply readelf options on result. Compare with regex (last arg).
1013 proc run_ld_link_tests { ldtests } {
1025 foreach testitem $ldtests {
1026 set testname [lindex $testitem 0]
1027 set ld_options [lindex $testitem 1]
1028 set as_options [lindex $testitem 2]
1029 set src_files [lindex $testitem 3]
1030 set actions [lindex $testitem 4]
1031 set binfile tmpdir/[lindex $testitem 5]
1032 set cflags [lindex $testitem 6]
1037 # verbose -log "Testname is $testname"
1038 # verbose -log "ld_options is $ld_options"
1039 # verbose -log "as_options is $as_options"
1040 # verbose -log "src_files is $src_files"
1041 # verbose -log "actions is $actions"
1042 # verbose -log "binfile is $binfile"
1044 # Assemble each file in the test.
1045 foreach src_file $src_files {
1046 set objfile "tmpdir/[file rootname $src_file].o"
1047 lappend objfiles $objfile
1049 if { [file extension $src_file] == ".c" } {
1050 set as_file "tmpdir/[file rootname $src_file].s"
1051 if ![ld_compile "$CC -S $CFLAGS $cflags" $srcdir/$subdir/$src_file $as_file] {
1056 set as_file "$srcdir/$subdir/$src_file"
1058 if ![ld_assemble $as "$as_options $as_file" $objfile] {
1064 # Catch assembler errors.
1065 if { $is_unresolved != 0 } {
1066 unresolved $testname
1070 if ![ld_simple_link $ld $binfile "-L$srcdir/$subdir $ld_options $objfiles"] {
1074 foreach actionlist $actions {
1075 set action [lindex $actionlist 0]
1076 set progopts [lindex $actionlist 1]
1078 # There are actions where we run regexp_diff on the
1079 # output, and there are other actions (presumably).
1080 # Handling of the former look the same.
1084 { set dump_prog $objdump }
1086 { set dump_prog $nm }
1088 { set dump_prog $READELF }
1091 perror "Unrecognized action $action"
1097 if { $dump_prog != "" } {
1098 set dumpfile [lindex $actionlist 2]
1099 set binary $dump_prog
1101 # Ensure consistent sorting of symbols
1102 if {[info exists env(LC_ALL)]} {
1103 set old_lc_all $env(LC_ALL)
1106 set cmd "$binary $progopts $binfile > dump.out"
1108 catch "exec $cmd" comp_output
1109 if {[info exists old_lc_all]} {
1110 set env(LC_ALL) $old_lc_all
1114 set comp_output [prune_warnings $comp_output]
1116 if ![string match "" $comp_output] then {
1117 send_log "$comp_output\n"
1122 if { [regexp_diff "dump.out" "$srcdir/$subdir/$dumpfile"] } then {
1123 verbose "output is [file_contents "dump.out"]" 2
1130 if { $failed != 0 } {
1132 } else { if { $is_unresolved == 0 } {
1137 # Catch action errors.
1138 if { $is_unresolved != 0 } {
1139 unresolved $testname
1146 proc verbose_eval { expr { level 1 } } {
1148 if $verbose>$level then { eval verbose "$expr" $level }
1151 # This definition is taken from an unreleased version of DejaGnu. Once
1152 # that version gets released, and has been out in the world for a few
1153 # months at least, it may be safe to delete this copy.
1154 if ![string length [info proc prune_warnings]] {
1156 # prune_warnings -- delete various system verbosities from TEXT
1159 # ld.so: warning: /usr/lib/libc.so.1.8.1 has older revision than expected 9
1161 # Sites with particular verbose os's may wish to override this in site.exp.
1163 proc prune_warnings { text } {
1164 # This is from sun4's. Do it for all machines for now.
1165 # The "\\1" is to try to preserve a "\n" but only if necessary.
1166 regsub -all "(^|\n)(ld.so: warning:\[^\n\]*\n?)+" $text "\\1" text
1168 # It might be tempting to get carried away and delete blank lines, etc.
1169 # Just delete *exactly* what we're ask to, and that's it.