1 # Traditional Chinese translation for cpplib.
2 # Copyright (C) 2005 Free Software Foundation, Inc.
3 # This file is distributed under the same license as the cpplib package.
4 # Meng Jie <zuxyhere@eastday.com>, 2005.
5 # Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2006.
9 "Project-Id-Version: cpplib 4.1.0\n"
10 "Report-Msgid-Bugs-To: http://gcc.gnu.org/bugs.html\n"
11 "POT-Creation-Date: 2010-10-22 14:48+0000\n"
12 "PO-Revision-Date: 2006-03-09 12:37+0800\n"
13 "Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n"
14 "Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
16 "Content-Type: text/plain; charset=UTF-8\n"
17 "Content-Transfer-Encoding: 8bit\n"
18 "Plural-Forms: nplurals=1; plural=0;\n"
22 msgid "conversion from %s to %s not supported by iconv"
23 msgstr "iconv 不支援從 %s 到 %s 的轉換"
31 msgid "no iconv implementation, cannot convert from %s to %s"
32 msgstr "沒有實作 iconv,無法從 %s 轉換到 %s"
36 msgid "character 0x%lx is not in the basic source character set\n"
37 msgstr "字元 0x%lx 不在基本來源字元集中\n"
39 #: charset.c:798 charset.c:1444
40 msgid "converting to execution character set"
45 msgid "character 0x%lx is not unibyte in execution character set"
46 msgstr "字元 0x%lx 在執行字元集中不是單位元組的"
50 msgid "Character %x might not be NFKC"
51 msgstr "字元 %x 可能不是 NFKC"
54 msgid "universal character names are only valid in C++ and C99"
55 msgstr "萬國碼字元名稱只在 C++ 和 C99 中有效"
59 msgid "the meaning of '\\%c' is different in traditional C"
60 msgstr "「\\%c」的意義與在傳統 C 中不同"
63 msgid "In _cpp_valid_ucn but not a UCN"
64 msgstr "在 _cpp_valid_ucn 中並不是一個 UCN"
68 msgid "incomplete universal character name %.*s"
69 msgstr "不完整的萬國碼字元名稱 %.*s"
73 msgid "%.*s is not a valid universal character"
74 msgstr "%.*s 不是一個有效的萬國碼字元"
76 #: charset.c:1056 lex.c:1040
77 msgid "'$' in identifier or number"
78 msgstr "「$」出現在識別字或數字中"
82 msgid "universal character %.*s is not valid in an identifier"
83 msgstr "萬國碼字元 %.*s 在識別字中無效"
87 msgid "universal character %.*s is not valid at the start of an identifier"
88 msgstr "萬國碼字元 %.*s 在識別字開頭無效"
90 #: charset.c:1102 charset.c:1674
91 msgid "converting UCN to source character set"
92 msgstr "將 UCN 轉換到來源字元集"
95 msgid "converting UCN to execution character set"
96 msgstr "將 UCN 轉換到執行字元集"
99 msgid "the meaning of '\\x' is different in traditional C"
100 msgstr "「\\x」的意義與在傳統 C 中不同"
103 msgid "\\x used with no following hex digits"
104 msgstr "\\x 後沒有十六進位數字"
107 msgid "hex escape sequence out of range"
111 msgid "octal escape sequence out of range"
115 msgid "the meaning of '\\a' is different in traditional C"
116 msgstr "「\\a」的意義與在傳統 C 中不同"
120 msgid "non-ISO-standard escape sequence, '\\%c'"
121 msgstr "非 ISO 標準的逸出序列,「\\%c」"
125 msgid "unknown escape sequence: '\\%c'"
126 msgstr "不明的逸出序列:「\\%c」"
130 msgid "unknown escape sequence: '\\%s'"
131 msgstr "不明的逸出序列:「\\%s」"
134 msgid "converting escape sequence to execution character set"
135 msgstr "將逸出序列轉換到執行字元集"
137 #: charset.c:1509 charset.c:1573
138 msgid "character constant too long for its type"
142 msgid "multi-character character constant"
146 msgid "empty character constant"
151 msgid "failure to convert %s to %s"
152 msgstr "無法從 %s 轉換到 %s"
154 #: directives.c:223 directives.c:249
156 msgid "extra tokens at end of #%s directive"
157 msgstr "#%s 指令的末尾有多餘的符記"
161 msgid "#%s is a GCC extension"
162 msgstr "#%s 是 GCC 擴充功能"
166 msgid "#%s is a deprecated GCC extension"
167 msgstr "#%s 是 GCC 擴充功能"
170 msgid "suggest not using #elif in traditional C"
171 msgstr "建議在傳統 C 中不要使用 #elif"
175 msgid "traditional C ignores #%s with the # indented"
176 msgstr "當 # 有縮排時傳統 C 忽略 #%s"
180 msgid "suggest hiding #%s from traditional C with an indented #"
181 msgstr "建議使用縮排的 # 以讓 #%s 對傳統 C 不可見"
184 msgid "embedding a directive within macro arguments is not portable"
185 msgstr "將一個指令內嵌於巨集參數中是不可移植的"
188 msgid "style of line directive is a GCC extension"
189 msgstr "line 指令的風格是 GCC 擴充功能"
193 msgid "invalid preprocessing directive #%s"
194 msgstr "無效的預先處理指令 #%s"
197 msgid "\"defined\" cannot be used as a macro name"
198 msgstr "「defined」不能做為巨集名"
202 msgid "\"%s\" cannot be used as a macro name as it is an operator in C++"
203 msgstr "「%s」不能做為巨集名,因為它是 C++ 中的一個運算子"
207 msgid "no macro name given in #%s directive"
208 msgstr "#%s 指令中未給出巨集名"
211 msgid "macro names must be identifiers"
216 msgid "undefining \"%s\""
220 msgid "missing terminating > character"
225 msgid "#%s expects \"FILENAME\" or <FILENAME>"
226 msgstr "#%s 需要 \"FILENAME\" 或 <FILENAME>"
230 msgid "empty filename in #%s"
234 msgid "#include nested too deeply"
235 msgstr "#include 巢狀過深"
238 msgid "#include_next in primary source file"
239 msgstr "#include_next 出現在主來源檔案中"
243 msgid "invalid flag \"%s\" in line directive"
244 msgstr "line 指令中有無效的標記「%s」"
247 msgid "unexpected end of file after #line"
252 msgid "\"%s\" after #line is not a positive integer"
253 msgstr "#line 後的「%s」不是一個正整數"
255 #: directives.c:916 directives.c:918
256 msgid "line number out of range"
259 #: directives.c:931 directives.c:1011
261 msgid "\"%s\" is not a valid filename"
262 msgstr "「%s」不是一個有效的檔案名稱"
266 msgid "\"%s\" after # is not a positive integer"
267 msgstr "# 後的「%s」不是一個正整數"
269 #: directives.c:1064 directives.c:1066 directives.c:1068
276 msgid "invalid #%s directive"
281 msgid "registering pragmas in namespace \"%s\" with mismatched name expansion"
286 msgid "registering pragma \"%s\" with name expansion and no namespace"
287 msgstr "「%s」既被註冊為一個 pragma 又被註冊為一個 pragma 命名空間"
291 msgid "registering \"%s\" as both a pragma and a pragma namespace"
292 msgstr "「%s」既被註冊為一個 pragma 又被註冊為一個 pragma 命名空間"
296 msgid "#pragma %s %s is already registered"
297 msgstr "#pragma %s %s 已經被註冊"
301 msgid "#pragma %s is already registered"
302 msgstr "#pragma %s 已經被註冊"
305 msgid "registering pragma with NULL handler"
309 msgid "#pragma once in main file"
310 msgstr "#pragma once 出現在主檔案中"
314 msgid "invalid #pragma push_macro directive"
315 msgstr "無效的 #pragma GCC poison 指令"
319 msgid "invalid #pragma pop_macro directive"
320 msgstr "無效的 #pragma GCC poison 指令"
323 msgid "invalid #pragma GCC poison directive"
324 msgstr "無效的 #pragma GCC poison 指令"
328 msgid "poisoning existing macro \"%s\""
329 msgstr "對已存在的巨集「%s」加料"
332 msgid "#pragma system_header ignored outside include file"
333 msgstr "#pragma system_header 在包含檔案外被忽略"
337 msgid "cannot find source file %s"
342 msgid "current file is older than %s"
346 msgid "_Pragma takes a parenthesized string literal"
347 msgstr "_Pragma 需要一個括起的字串原文"
350 msgid "#else without #if"
351 msgstr "#else 沒有匹配的 #if"
354 msgid "#else after #else"
355 msgstr "#else 出現在 #else 後"
357 #: directives.c:1923 directives.c:1956
358 msgid "the conditional began here"
362 msgid "#elif without #if"
363 msgstr "#elif 沒有匹配的 #if"
366 msgid "#elif after #else"
367 msgstr "#elif 出現在 #else 後"
370 msgid "#endif without #if"
371 msgstr "#endif 沒有匹配的 #if"
374 msgid "missing '(' after predicate"
378 msgid "missing ')' to complete answer"
382 msgid "predicate's answer is empty"
386 msgid "assertion without predicate"
390 msgid "predicate must be an identifier"
395 msgid "\"%s\" re-asserted"
400 msgid "unterminated #%s"
403 #: directives-only.c:222 lex.c:2068 traditional.c:163
404 msgid "unterminated comment"
417 msgid "too many decimal points in number"
420 #: expr.c:311 expr.c:396
422 msgid "fixed-point constants are a GCC extension"
423 msgstr "虛數常數是一個 GCC 擴充功能"
427 msgid "invalid digit \"%c\" in binary constant"
428 msgstr "八進位常數中有無效字元「%c」"
432 msgid "invalid digit \"%c\" in octal constant"
433 msgstr "八進位常數中有無效字元「%c」"
437 msgid "invalid prefix \"0b\" for floating constant"
438 msgstr "浮點常數的「%.*s」字尾無效"
442 msgid "no digits in hexadecimal floating constant"
443 msgstr "使用 C99 式的十六進位浮點常數"
446 msgid "use of C99 hexadecimal floating constant"
447 msgstr "使用 C99 式的十六進位浮點常數"
450 msgid "exponent has no digits"
454 msgid "hexadecimal floating constants require an exponent"
455 msgstr "十六進位浮點常數需要指數部分"
459 msgid "invalid suffix \"%.*s\" on floating constant"
460 msgstr "浮點常數的「%.*s」字尾無效"
462 #: expr.c:375 expr.c:425
464 msgid "traditional C rejects the \"%.*s\" suffix"
465 msgstr "傳統 C 不接受「%.*s」字尾"
469 msgid "suffix for double constant is a GCC extension"
470 msgstr "虛數常數是一個 GCC 擴充功能"
474 msgid "invalid suffix \"%.*s\" with hexadecimal floating constant"
475 msgstr "浮點常數的「%.*s」字尾無效"
479 msgid "decimal float constants are a GCC extension"
480 msgstr "虛數常數是一個 GCC 擴充功能"
484 msgid "invalid suffix \"%.*s\" on integer constant"
485 msgstr "整數常數的「%.*s」字尾無效"
489 msgid "use of C++0x long long integer constant"
490 msgstr "使用 C99 long long 整數常數"
493 msgid "use of C99 long long integer constant"
494 msgstr "使用 C99 long long 整數常數"
497 msgid "imaginary constants are a GCC extension"
498 msgstr "虛數常數是一個 GCC 擴充功能"
502 msgid "binary constants are a GCC extension"
503 msgstr "虛數常數是一個 GCC 擴充功能"
506 msgid "integer constant is too large for its type"
510 msgid "integer constant is so large that it is unsigned"
511 msgstr "整數常數太大,認定為 unsigned"
514 msgid "missing ')' after \"defined\""
515 msgstr "「defined」 後缺少「)」"
518 msgid "operator \"defined\" requires an identifier"
519 msgstr "運算子「defined」需要一個識別字"
523 msgid "(\"%s\" is an alternative token for \"%s\" in C++)"
524 msgstr "(在 C++ 中「%s」會是「%s」的替代識別字)"
527 msgid "this use of \"defined\" may not be portable"
528 msgstr "使用「defined」可能不利於移植"
531 msgid "floating constant in preprocessor expression"
532 msgstr "浮點常數出現在預先處理運算式中"
535 msgid "imaginary number in preprocessor expression"
536 msgstr "預先處理運算式中出現虛數"
540 msgid "\"%s\" is not defined"
545 msgid "assertions are a GCC extension"
546 msgstr "#%s 是 GCC 擴充功能"
549 msgid "assertions are a deprecated extension"
552 #: expr.c:952 expr.c:981
554 msgid "missing binary operator before token \"%s\""
555 msgstr "識別字「%s」前缺少二元運算子"
559 msgid "token \"%s\" is not valid in preprocessor expressions"
560 msgstr "識別字「%s」在預先處理運算式中無效"
563 msgid "missing expression between '(' and ')'"
564 msgstr "「(」與「)」之間缺少運算式"
568 msgid "%s with no expression"
573 msgid "operator '%s' has no right operand"
574 msgstr "運算子「%s」沒有右運算元"
578 msgid "operator '%s' has no left operand"
579 msgstr "運算子「%s」沒有左運算元"
582 msgid " ':' without preceding '?'"
587 msgid "unbalanced stack in %s"
592 msgid "impossible operator '%u'"
596 msgid "missing ')' in expression"
600 msgid "'?' without following ':'"
604 msgid "integer overflow in preprocessor expression"
605 msgstr "預先處理運算式中整數溢出"
608 msgid "missing '(' in expression"
613 msgid "the left operand of \"%s\" changes sign when promoted"
614 msgstr "「%s」的左運算元在提升時變換了符號"
618 msgid "the right operand of \"%s\" changes sign when promoted"
619 msgstr "「%s」的右運算元在提升時變換了符號"
622 msgid "traditional C rejects the unary plus operator"
623 msgstr "傳統 C 不接受單元 + 運算子"
626 msgid "comma operator in operand of #if"
627 msgstr "#if 運算元中出現逗號"
630 msgid "division by zero in #if"
634 msgid "NULL directory in find_file"
635 msgstr "find_file 中有 NULL 目錄"
638 msgid "one or more PCH files were found, but they were invalid"
639 msgstr "找到一個或多個 PCH 檔案,但它們是無效的"
642 msgid "use -Winvalid-pch for more information"
643 msgstr "使用 -Winvalid-pch 以獲得更多資訊"
647 msgid "%s is a block device"
652 msgid "%s is too large"
657 msgid "%s is shorter than expected"
662 msgid "no include path in which to search for %s"
663 msgstr "沒有包含路徑可供搜尋 %s"
666 msgid "Multiple include guards may be useful for:\n"
667 msgstr "多個防止重包含可能對其有用:\n"
670 msgid "cppchar_t must be an unsigned type"
671 msgstr "cppchar_t 必須是無號類型"
675 msgid "preprocessor arithmetic has maximum precision of %lu bits; target requires %lu bits"
676 msgstr "預先處理算術的最高精度為 %lu 位;目標需要 %lu 位"
679 msgid "CPP arithmetic must be at least as precise as a target int"
680 msgstr "CPP 算術必須至少具有目標 int 的精度"
683 msgid "target char is less than 8 bits wide"
684 msgstr "目標 char 短於 8 位"
687 msgid "target wchar_t is narrower than target char"
688 msgstr "目標 wchar_t 短於目標 char"
691 msgid "target int is narrower than target char"
692 msgstr "目標 int 短於目標 char"
695 msgid "CPP half-integer narrower than CPP character"
696 msgstr "CPP 半整數短於 CPP 字元"
700 msgid "CPP on this host cannot handle wide character constants over %lu bits, but the target requires %lu bits"
701 msgstr "在此宿主機上,CPP 不能處理長於 %lu 位的寬字元常數,但目標需要 %lu 位"
704 msgid "backslash and newline separated by space"
705 msgstr "反斜線和換列為空格所分隔"
708 msgid "backslash-newline at end of file"
709 msgstr "反斜線-換列出現在檔案末尾"
713 msgid "trigraph ??%c converted to %c"
714 msgstr "三元符 ??%c 轉換為 %c"
718 msgid "trigraph ??%c ignored, use -trigraphs to enable"
719 msgstr "三元符 ??%c 被忽略,請使用 -trigraphs 來啟用"
722 msgid "\"/*\" within comment"
727 msgid "%s in preprocessing directive"
728 msgstr "預先處理指令中出現 %s"
731 msgid "null character(s) ignored"
736 msgid "`%.*s' is not in NFKC"
737 msgstr "「%.*s」不在 NFKC 中"
741 msgid "`%.*s' is not in NFC"
742 msgstr "「%.*s」不在 NFC 中"
744 #: lex.c:1087 lex.c:1164
746 msgid "attempt to use poisoned \"%s\""
747 msgstr "試圖使用已加料的「%s」"
749 #: lex.c:1095 lex.c:1172
750 msgid "__VA_ARGS__ can only appear in the expansion of a C99 variadic macro"
751 msgstr "__VA_ARGS__ 只能出現在 C99 可變參數巨集的展開中"
753 #: lex.c:1101 lex.c:1178
755 msgid "identifier \"%s\" is a special operator name in C++"
759 msgid "raw string delimiter longer than 16 characters"
764 msgid "invalid character '%c' in raw string delimiter"
765 msgstr "萬國碼字元 %.*s 在識別字中無效"
767 #: lex.c:1447 lex.c:1469
769 msgid "unterminated raw string"
772 #: lex.c:1484 lex.c:1583
773 msgid "null character(s) preserved in literal"
778 msgid "missing terminating %c character"
782 msgid "C++ style comments are not allowed in ISO C90"
783 msgstr "C++ 風格的註釋在 ISO C90 中不被允許"
786 msgid "(this will be reported only once per input file)"
787 msgstr "(此警告為每個輸入檔案只報告一次)"
790 msgid "multi-line comment"
795 msgid "unspellable token %s"
800 msgid "macro \"%s\" is not used"
803 #: macro.c:126 macro.c:321
805 msgid "invalid built-in macro \"%s\""
810 msgid "could not determine file timestamp"
814 msgid "could not determine date and time"
818 msgid "__COUNTER__ expanded inside directive with -fdirectives-only"
822 msgid "invalid string literal, ignoring final '\\'"
823 msgstr "無效的原文字串,忽略最後的「\\」"
827 msgid "pasting \"%s\" and \"%s\" does not give a valid preprocessing token"
828 msgstr "粘貼「%s」和「%s」不能給出一個有效的預先處理識別字"
831 msgid "ISO C99 requires rest arguments to be used"
832 msgstr "ISO C99 需要使用剩餘的引數"
836 msgid "macro \"%s\" requires %u arguments, but only %u given"
837 msgstr "巨集「%s」需要 %u 個引數,但只給出了 %u 個"
841 msgid "macro \"%s\" passed %u arguments, but takes just %u"
842 msgstr "巨集「%s」傳遞了 %u 個引數,但只需要 %u 個"
844 #: macro.c:734 traditional.c:681
846 msgid "unterminated argument list invoking macro \"%s\""
847 msgstr "呼叫巨集「%s」時引數清單未終止"
851 msgid "function-like macro \"%s\" must be used with arguments in traditional C"
852 msgstr "類似函式的巨集「%s」在傳統 C 中必須與引數一起使用"
856 msgid "invoking macro %s argument %d: empty macro arguments are undefined in ISO C90 and ISO C++98"
861 msgid "duplicate macro parameter \"%s\""
866 msgid "\"%s\" may not appear in macro parameter list"
867 msgstr "「%s」不能出現在巨集參數清單中"
870 msgid "macro parameters must be comma-separated"
874 msgid "parameter name missing"
878 msgid "anonymous variadic macros were introduced in C99"
879 msgstr "匿名可變參數巨集在 C99 中被引入"
882 msgid "ISO C does not permit named variadic macros"
883 msgstr "ISO C 不允許具名的可變參數巨集"
886 msgid "missing ')' in macro parameter list"
887 msgstr "在巨集參數表中缺少「)」"
890 msgid "'##' cannot appear at either end of a macro expansion"
891 msgstr "「##」不能出現在巨集展開的兩端"
894 msgid "ISO C99 requires whitespace after the macro name"
895 msgstr "ISO C99 要求巨集名後必須有空白"
898 msgid "missing whitespace after the macro name"
902 msgid "'#' is not followed by a macro parameter"
907 msgid "\"%s\" redefined"
911 msgid "this is the location of the previous definition"
916 msgid "macro argument \"%s\" would be stringified in traditional C"
917 msgstr "巨集引數「%s」將在傳統 C 中被字串化"
921 msgid "invalid hash type %d in cpp_macro_definition"
922 msgstr "cpp_macro_definition 中有無效的雜湊類型 %d"
924 #: pch.c:88 pch.c:336 pch.c:348 pch.c:366 pch.c:372 pch.c:381 pch.c:388
925 msgid "while writing precompiled header"
930 msgid "%s: not used because `%.*s' is poisoned"
931 msgstr "%s:未使用,因為「%s」已定義"
935 msgid "%s: not used because `%.*s' not defined"
936 msgstr "%s:未使用,因為「%.*s」未定義"
940 msgid "%s: not used because `%.*s' defined as `%s' not `%.*s'"
941 msgstr "%s:未使用,因為「%.*s」被定義為「%s」而非「%*.s」"
945 msgid "%s: not used because `%s' is defined"
946 msgstr "%s:未使用,因為「%s」已定義"
950 msgid "%s: not used because `__COUNTER__' is invalid"
951 msgstr "%s:未使用,因為「%s」已定義"
953 #: pch.c:712 pch.c:891
954 msgid "while reading precompiled header"
959 msgid "detected recursion whilst expanding macro \"%s\""
960 msgstr "展開巨集「%s」時偵測到遞迴"
963 msgid "syntax error in macro parameter list"
969 #~ msgid "internal error: "
975 #~ msgid "no newline at end of file"
976 #~ msgstr "檔案未以空白列結束"
978 #~ msgid "In file included from %s:%u"
979 #~ msgstr "在包含自 %s:%u 的檔案中"